t1utils-1.37/0000755000076400007640000000000011602731036010061 500000000000000t1utils-1.37/README0000644000076400007640000000574111602730476010677 00000000000000T1UTILS VERSION 1.37 NOTES ========================== You need an ANSI C compiler, such as gcc. Just type `./configure', then `make'. `make install' will build and install the utilities and their manual pages. `./configure' accepts the usual options. See `INSTALL' for more details. The most commonly used option is `--prefix', which can be used to install the utilities in a place other than /usr/local. Changes since version 1.2 (c) 1998-2008 Eddie Kohler, under the same redistribution copyright as I. Lee Hetherington's. See below for I. Lee Hetherington's original README from 1992, updated slightly for today's t1utils. Eddie Kohler ekohler@gmail.com #################################################################### t1utils is a collection of simple type-1 font manipulation programs. Together, they allow you to convert between PFA (ASCII) and PFB (binary) formats, disassemble PFA or PFB files into human-readable form, reassemble them into PFA or PFB format. Additionally you can extract font resources from a Macintosh font file (ATM/Laserwriter), or create a Macintosh Type 1 font file from a PFA or PFB font. There are currently six programs: t1ascii converts PFB files to PFA format. t1binary converts PFA files to PFB format. t1disasm disassembles a type-1 font (PFA or PFB format) into a raw, human-readable text form for subsequent hand editing, tweaking, hint fixing, etc... t1asm assembles type-1 font into PFA or PFB format from human-readable form produced by t1disasm. t1unmac extracts POST resources from a Macintosh type-1 file (ATM/Laserwriter) into PFA or PFB format for use outside the Macintosh environment. The Macintosh file should be stored in MacBinary, AppleSingle, AppleDouble, or BinHex format, or as a raw resource fork. Note that t1unmac does not have to run on a Macintosh, but makes Macintosh type-1 fonts available to Unix machines and PCs. t1mac creates a Macintosh Type 1 file from a PFA or PFB-format Type 1 font. Writes the Macintosh file in MacBinary, AppleSingle, AppleDouble, or BinHex format, or as a raw resource fork. WARNING: This will not suffice to use the new font on a Macintosh, as Macintoshes cannot read raw Type 1 fonts. You will need to create a font suitcase containing bitmap fonts if you do not have such a suitcase for the font already. T1utils cannot help you do this. ... Thanks to Kai-Uwe Herbing (herbing@netmbx.netmbx.de) for the MS-DOS port (Microsoft C/C++ compiler). The copyright on all of the tools in t1utils looks like: Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. Permission is hereby granted to use, modify, and distribute this program for any purpose provided this copyright notice and the one below remain intact. Note that these tools should not be used to illegally copy type-1 font programs. Typeface design is an intricate art that should be rewarded. I. Lee Hetherington ilh@lcs.mit.edu #################################################################### t1utils-1.37/t1utils.spec0000644000076400007640000000275411602730476012301 00000000000000Summary: Programs for manipulating PostScript Type 1 fonts Name: t1utils Version: 1.37 Release: 1 Source: http://www.lcdf.org/type/t1utils-1.37.tar.gz URL: http://www.lcdf.org/type/ Group: Utilities/Printing Vendor: Little Cambridgeport Design Factory Packager: Eddie Kohler License: freely modifiable and distributable BuildRoot: /tmp/t1utils-build %description The t1utils package is a set of programs for manipulating PostScript Type 1 fonts. It contains programs to change between binary PFB format (for storage), ASCII PFA format (for printing), a human-readable and -editable ASCII format, and Macintosh resource forks. %prep %setup %build %configure make %install [ "$RPM_BUILD_ROOT" != "/" ] && [ -d $RPM_BUILD_ROOT ] && rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT make DESTDIR=$RPM_BUILD_ROOT install %clean [ "$RPM_BUILD_ROOT" != "/" ] && [ -d $RPM_BUILD_ROOT ] && rm -rf $RPM_BUILD_ROOT %files %attr(-,root,root) %doc NEWS README %attr(0755,root,root) %{_bindir}/t1ascii %attr(0755,root,root) %{_bindir}/t1binary %attr(0755,root,root) %{_bindir}/t1asm %attr(0755,root,root) %{_bindir}/t1disasm %attr(0755,root,root) %{_bindir}/t1unmac %attr(0755,root,root) %{_bindir}/t1mac %attr(0644,root,root) %{_mandir}/man1/t1ascii.1* %attr(0644,root,root) %{_mandir}/man1/t1binary.1* %attr(0644,root,root) %{_mandir}/man1/t1asm.1* %attr(0644,root,root) %{_mandir}/man1/t1disasm.1* %attr(0644,root,root) %{_mandir}/man1/t1unmac.1* %attr(0644,root,root) %{_mandir}/man1/t1mac.1* t1utils-1.37/t1asm.c0000644000076400007640000005176411602730600011203 00000000000000/* t1asm -*- c-basic-offset: 2 -*- * * This program `assembles' Adobe Type-1 font programs in pseudo-PostScript * form into either PFB or PFA format. The human readable/editable input is * charstring- and eexec-encrypted as specified in the `Adobe Type 1 Font * Format' version 1.1 (the `black book'). There is a companion program, * t1disasm, which `disassembles' PFB and PFA files into a pseudo-PostScript * file. * * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. * * Permission is hereby granted to use, modify, and distribute this program * for any purpose provided this copyright notice and the one below remain * intact. * * I. Lee Hetherington (ilh@lcs.mit.edu) * * 1.5 and later versions contain changes by, and are maintained by, * Eddie Kohler . * * New change log in `NEWS'. Old change log: * * Revision 1.4 92/07/10 10:53:09 ilh * Added support for additional PostScript after the closefile command * (ie., some fonts have {restore}if after the cleartomark). * * Revision 1.3 92/06/23 10:58:25 ilh * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) * incoporated. * * Revision 1.2 92/05/22 11:54:45 ilh * Fixed bug where integers larger than 32000 could not be encoded in * charstrings. Now integer range is correct for four-byte * twos-complement integers: -(1<<31) <= i <= (1<<31)-1. Bug detected by * Piet Tutelaers (rcpt@urc.tue.nl). * * Revision 1.1 92/05/22 11:48:46 ilh * initial version * * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS * ... #endif, where _MSDOS is an identifier, which is automatically * defined, if you compile with the Microsoft C/C++ Compiler. * */ /* Note: this is ANSI C. */ #ifdef HAVE_CONFIG_H # include #endif #if defined(_MSDOS) || defined(_WIN32) # include # include #endif #include #include #include #include #include #include #include #include #include "t1lib.h" #define LINESIZE 512 #ifdef __cplusplus extern "C" { #endif typedef unsigned char byte; static FILE *ifp; static FILE *ofp; static struct pfb_writer w; static int blocklen = -1; /* flags */ static int pfb = 1; static int active = 0; static int ever_active = 0; static int start_charstring = 0; static int in_eexec = 0; /* need to add 1 as space for \0 */ static char line[LINESIZE + 1]; /* lenIV and charstring start command */ static int lenIV = 4; static char cs_start[10]; /* for charstring buffering */ static byte *charstring_buf, *charstring_bp; static int charstring_bufsiz; /* decryption stuff */ static uint16_t er, cr; static uint16_t c1 = 52845, c2 = 22719; /* table of charstring commands */ static struct command { const char *name; int one, two; } command_table[] = { { "abs", 12, 9 }, /* Type 2 */ { "add", 12, 10 }, /* Type 2 */ { "and", 12, 3 }, /* Type 2 */ { "blend", 16, -1 }, /* Type 2 */ { "callgsubr", 29, -1 }, /* Type 2 */ { "callother", 12, 16 }, /* Type 1 ONLY */ { "callothersubr", 12, 16 }, /* Type 1 ONLY */ { "callsubr", 10, -1 }, { "closepath", 9, -1 }, /* Type 1 ONLY */ { "cntrmask", 20, -1 }, /* Type 2 */ { "div", 12, 12 }, { "dotsection", 12, 0 }, /* Type 1 ONLY */ { "drop", 12, 18 }, /* Type 2 */ { "dup", 12, 27 }, /* Type 2 */ { "endchar", 14, -1 }, { "eq", 12, 15 }, /* Type 2 */ { "error", 0, -1 }, /* special */ { "escape", 12, -1 }, /* special */ { "exch", 12, 28 }, /* Type 2 */ { "flex", 12, 35 }, /* Type 2 */ { "flex1", 12, 37 }, /* Type 2 */ { "get", 12, 21 }, /* Type 2 */ { "hflex", 12, 34 }, /* Type 2 */ { "hflex1", 12, 36 }, /* Type 2 */ { "hhcurveto", 27, -1 }, /* Type 2 */ { "hintmask", 19, -1 }, /* Type 2 */ { "hlineto", 6, -1 }, { "hmoveto", 22, -1 }, { "hsbw", 13, -1 }, /* Type 1 ONLY */ { "hstem", 1, -1 }, { "hstem3", 12, 2 }, /* Type 1 ONLY */ { "hstemhm", 18, -1 }, /* Type 2 */ { "hvcurveto", 31, -1 }, { "ifelse", 12, 22 }, /* Type 2 */ { "index", 12, 29 }, /* Type 2 */ { "load", 12, 13 }, /* Type 2 */ { "mul", 12, 24 }, /* Type 2 */ { "neg", 12, 14 }, /* Type 2 */ { "not", 12, 5 }, /* Type 2 */ { "or", 12, 4 }, /* Type 2 */ { "pop", 12, 17 }, /* Type 1 ONLY */ { "put", 12, 20 }, /* Type 2 */ { "random", 12, 23 }, /* Type 2 */ { "rcurveline", 24, -1 }, /* Type 2 */ { "return", 11, -1 }, { "rlinecurve", 25, -1 }, /* Type 2 */ { "rlineto", 5, -1 }, { "rmoveto", 21, -1 }, { "roll", 12, 30 }, /* Type 2 */ { "rrcurveto", 8, -1 }, { "sbw", 12, 7 }, /* Type 1 ONLY */ { "seac", 12, 6 }, /* Type 1 ONLY */ { "setcurrentpoint", 12, 33 }, /* Type 1 ONLY */ { "sqrt", 12, 26 }, /* Type 2 */ { "store", 12, 8 }, /* Type 2 */ { "sub", 12, 11 }, /* Type 2 */ { "vhcurveto", 30, -1 }, { "vlineto", 7, -1 }, { "vmoveto", 4, -1 }, { "vstem", 3, -1 }, { "vstem3", 12, 1 }, /* Type 1 ONLY */ { "vstemhm", 23, -1 }, /* Type 2 */ { "vvcurveto", 26, -1 }, /* Type 2 */ }; /* alphabetical */ /* Two separate encryption functions because eexec and charstring encryption must proceed in parallel. */ static byte eencrypt(byte plain) { byte cipher; cipher = (byte)(plain ^ (er >> 8)); er = (uint16_t)((cipher + er) * c1 + c2); return cipher; } static byte cencrypt(byte plain) { byte cipher; /* Thanks to Tom Kacvinsky who reported that lenIV == -1 means unencrypted charstrings. */ if (lenIV < 0) return plain; cipher = (byte)(plain ^ (cr >> 8)); cr = (uint16_t)((cipher + cr) * c1 + c2); return cipher; } /* This function outputs a single byte. If output is in PFB format then output is buffered through blockbuf[]. If output is in PFA format, then output will be hexadecimal if in_eexec is set, ASCII otherwise. */ static void output_byte(byte b) { static const char *hexchar = "0123456789abcdef"; static int hexcol = 0; if (pfb) { /* PFB */ PFB_OUTPUT_BYTE(&w, b); } else { /* PFA */ if (in_eexec) { /* trim hexadecimal lines to `blocklen' columns */ if (hexcol >= blocklen) { putc('\n', ofp); hexcol = 0; } putc(hexchar[(b >> 4) & 0xf], ofp); putc(hexchar[b & 0xf], ofp); hexcol += 2; } else { putc(b, ofp); } } } /* This function outputs a byte through possible eexec encryption. */ static void eexec_byte(byte b) { if (in_eexec) output_byte(eencrypt(b)); else output_byte(b); } /* This function outputs a null-terminated string through possible eexec encryption. */ static void eexec_string(const char *string) { while (*string) eexec_byte(*string++); } /* This function gets ready for the eexec-encrypted data. If output is in PFB format then flush current ASCII block and get ready for binary block. We start encryption with four random (zero) bytes. */ static void eexec_start(char *string) { eexec_string("currentfile eexec\n"); if (pfb && w.blocktyp != PFB_BINARY) { pfb_writer_output_block(&w); w.blocktyp = PFB_BINARY; } in_eexec = 1; er = 55665; eexec_byte(0); eexec_byte(0); eexec_byte(0); eexec_byte(0); eexec_string(string); } /* 25.Aug.1999 -- Return 1 if this line actually looks like the start of a charstring. We use the heuristic that it should start with `/' (a name) or `dup' (a subroutine). Previous heuristic caused killa bad output. */ static int check_line_charstring(void) { char *p = line; while (isspace(*p)) p++; return (*p == '/' || (p[0] == 'd' && p[1] == 'u' && p[2] == 'p')); } /* This function returns an input line of characters. A line is terminated by length (including terminating null) greater than LINESIZE, \r, \n, \r\n, or when active (looking for charstrings) by '{'. When terminated by a newline the newline is put into line[]. When terminated by '{', the '{' is not put into line[], and the flag start_charstring is set to 1. */ static void t1utils_getline(void) { int c; char *p = line; int comment = 0; start_charstring = 0; while (p < line + LINESIZE) { c = getc(ifp); if (c == EOF) break; else if (c == '%') comment = 1; else if (active && !comment && c == '{') { /* 25.Aug.1999 -- new check for whether we should stop be active */ if (check_line_charstring()) { start_charstring = 1; break; } else active = 0; } *p++ = (char) c; /* end of line processing: change CR or CRLF into LF, and exit */ if (c == '\r') { c = getc(ifp); if (c != '\n') ungetc(c, ifp); p[-1] = '\n'; break; } else if (c == '\n') break; } *p = '\0'; } /* This function wraps-up the eexec-encrypted data and writes ASCII trailer. If output is in PFB format then this entails flushing binary block and starting an ASCII block. */ static void eexec_end(void) { int i, j; if (!pfb) putc('\n', ofp); else if (w.blocktyp != PFB_ASCII) { pfb_writer_output_block(&w); w.blocktyp = PFB_ASCII; } in_eexec = active = 0; for (i = 0; i < 8; i++) { for (j = 0; j < 64; j++) eexec_byte('0'); eexec_byte('\n'); } } /* This function is used by the binary search, bsearch(), for command names in the command table. */ static int CDECL command_compare(const void *key, const void *item) { return strcmp((const char *) key, ((const struct command *) item)->name); } /* This function returns 1 if the string is an integer and 0 otherwise. */ static int is_integer(char *string) { if (isdigit(string[0]) || string[0] == '-' || string[0] == '+') { while (*++string && isdigit(*string)) ; /* deliberately empty */ if (!*string) return 1; } return 0; } /* This function initializes charstring encryption. Note that this is called at the beginning of every charstring. */ static void charstring_start(void) { int i; if (!charstring_buf) { charstring_bufsiz = 65536; if (!(charstring_buf = (byte *) malloc(charstring_bufsiz))) fatal_error("out of memory"); } charstring_bp = charstring_buf; cr = 4330; for (i = 0; i < lenIV; i++) *charstring_bp++ = cencrypt((byte) 0); } /* This function encrypts and buffers a single byte of charstring data. */ static void charstring_byte(int v) { byte b = (byte)(v & 0xff); if (charstring_bp - charstring_buf == charstring_bufsiz) { charstring_bufsiz *= 2; if (!(charstring_buf = (byte *) realloc(charstring_buf, charstring_bufsiz))) fatal_error("out of memory"); charstring_bp = charstring_buf + charstring_bufsiz / 2; } *charstring_bp++ = cencrypt(b); } /* This function outputs buffered, encrypted charstring data through possible eexec encryption. */ static void charstring_end(void) { byte *bp; sprintf(line, "%d ", (int) (charstring_bp - charstring_buf)); eexec_string(line); sprintf(line, "%s ", cs_start); eexec_string(line); for (bp = charstring_buf; bp < charstring_bp; bp++) eexec_byte(*bp); } /* This function generates the charstring representation of an integer. */ static void charstring_int(int num) { int x; if (num >= -107 && num <= 107) { charstring_byte(num + 139); } else if (num >= 108 && num <= 1131) { x = num - 108; charstring_byte(x / 256 + 247); charstring_byte(x % 256); } else if (num >= -1131 && num <= -108) { x = abs(num) - 108; charstring_byte(x / 256 + 251); charstring_byte(x % 256); } else if (num >= (-2147483647-1) && num <= 2147483647) { charstring_byte(255); charstring_byte(num >> 24); charstring_byte(num >> 16); charstring_byte(num >> 8); charstring_byte(num); } else { error("can't format huge number `%d'", num); /* output 0 instead */ charstring_byte(139); } } /* This function returns one charstring token. It ignores comments. */ static void get_charstring_token(void) { int c = getc(ifp); while (isspace(c)) c = getc(ifp); if (c == '%') { while (c != EOF && c != '\r' && c != '\n') c = getc(ifp); get_charstring_token(); } else if (c == '}') { line[0] = '}'; line[1] = 0; } else { char *p = line; while (p < line + LINESIZE) { *p++ = c; c = getc(ifp); if (c == EOF || isspace(c) || c == '%' || c == '}') { ungetc(c, ifp); break; } } *p = 0; } } /* This function parses an entire charstring into integers and commands, outputting bytes through the charstring buffer. */ static void parse_charstring(void) { struct command *cp; charstring_start(); while (!feof(ifp)) { get_charstring_token(); if (line[0] == '}') break; if (is_integer(line)) { charstring_int(atoi(line)); } else { int one; int two; int ok = 0; cp = (struct command *) bsearch((void *) line, (void *) command_table, sizeof(command_table) / sizeof(struct command), sizeof(struct command), command_compare); if (cp) { one = cp->one; two = cp->two; ok = 1; } else if (strncmp(line, "escape_", 7) == 0) { /* Parse the `escape' keyword requested by Lee Chun-Yu and Werner Lemberg */ one = 12; if (sscanf(line + 7, "%d", &two) == 1) ok = 1; } else if (strncmp(line, "UNKNOWN_", 8) == 0) { /* Allow unanticipated UNKNOWN commands. */ one = 12; if (sscanf(line + 8, "12_%d", &two) == 1) ok = 1; else if (sscanf(line + 8, "%d", &one) == 1) { two = -1; ok = 1; } } if (!ok) error("unknown charstring command `%s'", line); else if (one < 0 || one > 255) error("bad charstring command number `%d'", one); else if (two > 255) error("bad charstring command number `%d'", two); else if (two < 0) charstring_byte(one); else { charstring_byte(one); charstring_byte(two); } } } charstring_end(); } /***** * Command line **/ #define BLOCK_LEN_OPT 300 #define OUTPUT_OPT 301 #define VERSION_OPT 302 #define HELP_OPT 303 #define PFB_OPT 304 #define PFA_OPT 305 static Clp_Option options[] = { { "block-length", 'l', BLOCK_LEN_OPT, Clp_ValInt, 0 }, { "help", 0, HELP_OPT, 0, 0 }, { "line-length", 0, BLOCK_LEN_OPT, Clp_ValInt, 0 }, { "output", 'o', OUTPUT_OPT, Clp_ValString, 0 }, { "pfa", 'a', PFA_OPT, 0, 0 }, { "pfb", 'b', PFB_OPT, 0, 0 }, { "version", 0, VERSION_OPT, 0, 0 }, }; static const char *program_name; void fatal_error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); exit(1); } void error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); } static void short_usage(void) { fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ Try `%s --help' for more information.\n", program_name, program_name); } static void usage(void) { printf("\ `T1asm' translates a human-readable version of a PostScript Type 1 font into\n\ standard PFB or PFA format. The result is written to the standard output\n\ unless an OUTPUT file is given.\n\ \n\ Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ \n\ Options:\n\ -a, --pfa Output font in ASCII (PFA) format.\n\ -b, --pfb Output font in binary (PFB) format. This is\n\ the default.\n\ -l, --block-length NUM Set max block length for PFB output.\n\ -l, --line-length NUM Set max encrypted line length for PFA output.\n\ -o, --output=FILE Write output to FILE.\n\ -h, --help Print this message and exit.\n\ --version Print version number and warranty and exit.\n\ \n\ Report bugs to .\n", program_name); } #ifdef __cplusplus } #endif int main(int argc, char *argv[]) { char *p, *q, *r; Clp_Parser *clp = Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); program_name = Clp_ProgramName(clp); /* interpret command line arguments using CLP */ while (1) { int opt = Clp_Next(clp); switch (opt) { case BLOCK_LEN_OPT: blocklen = clp->val.i; break; output_file: case OUTPUT_OPT: if (ofp) fatal_error("output file already specified"); if (strcmp(clp->vstr, "-") == 0) ofp = stdout; else if (!(ofp = fopen(clp->vstr, "w"))) fatal_error("%s: %s", clp->vstr, strerror(errno)); break; case PFB_OPT: pfb = 1; break; case PFA_OPT: pfb = 0; break; case HELP_OPT: usage(); exit(0); break; case VERSION_OPT: printf("t1asm (LCDF t1utils) %s\n", VERSION); printf("Copyright (C) 1992-2010 I. Lee Hetherington, Eddie Kohler et al.\n\ This is free software; see the source for copying conditions.\n\ There is NO warranty, not even for merchantability or fitness for a\n\ particular purpose.\n"); exit(0); break; case Clp_NotOption: if (ifp && ofp) fatal_error("too many arguments"); else if (ifp) goto output_file; if (strcmp(clp->vstr, "-") == 0) ifp = stdin; else if (!(ifp = fopen(clp->vstr, "r"))) fatal_error("%s: %s", clp->vstr, strerror(errno)); break; case Clp_Done: goto done; case Clp_BadOption: short_usage(); exit(1); break; } } done: if (!pfb) { if (blocklen == -1) blocklen = 64; else if (blocklen < 8) { blocklen = 8; error("warning: line length raised to %d", blocklen); } else if (blocklen > 1024) { blocklen = 1024; error("warning: line length lowered to %d", blocklen); } } if (!ifp) ifp = stdin; if (!ofp) ofp = stdout; if (pfb) init_pfb_writer(&w, blocklen, ofp); #if defined(_MSDOS) || defined(_WIN32) /* If we are processing a PFB (binary) output */ /* file, we must set its file mode to binary. */ if (pfb) _setmode(_fileno(ofp), _O_BINARY); #endif /* Finally, we loop until no more input. Some special things to look for are the `currentfile eexec' line, the beginning of the `/Subrs' or `/CharStrings' definition, the definition of `/lenIV', and the definition of the charstring start command which has `...string currentfile...' in it. Being careful: Check with `/Subrs' and `/CharStrings' to see that a number follows the token -- otherwise, the token is probably nested in a subroutine a la Adobe Jenson, and we shouldn't pay attention to it. Bugs: Occurrence of `/Subrs 9' in a comment will fool t1asm. Thanks to Tom Kacvinsky who reported that some fonts come without /Subrs sections and provided a patch. */ while (!feof(ifp) && !ferror(ifp)) { t1utils_getline(); if (!ever_active) { if (strncmp(line, "currentfile eexec", 17) == 0 && isspace(line[17])) { /* Allow arbitrary whitespace after "currentfile eexec". Thanks to Tom Kacvinsky for reporting this. Note: strlen("currentfile eexec") == 17. */ for (p = line + 18; isspace(*p); p++) ; eexec_start(p); continue; } else if (strncmp(line, "/lenIV", 6) == 0) { lenIV = atoi(line + 6); } else if ((p = strstr(line, "string currentfile")) && strstr(line, "readstring")) { /* enforce `readstring' */ /* locate the name of the charstring start command */ *p = '\0'; /* damage line[] */ q = strrchr(line, '/'); if (q) { r = cs_start; ++q; while (!isspace(*q) && *q != '{') *r++ = *q++; *r = '\0'; } *p = 's'; /* repair line[] */ } } if (!active) { if ((p = strstr(line, "/Subrs")) && isdigit(p[7])) ever_active = active = 1; else if ((p = strstr(line, "/CharStrings")) && isdigit(p[13])) ever_active = active = 1; } if ((p = strstr(line, "currentfile closefile"))) { /* 2/14/99 -- happy Valentine's day! -- don't look for `mark currentfile closefile'; the `mark' might be on a different line */ /* 1/3/2002 -- happy new year! -- Luc Devroye reports a failure with some printers when `currentfile closefile' is followed by space */ p += sizeof("currentfile closefile") - 1; for (q = p; isspace(*q) && *q != '\n'; q++) /* nada */; if (q == p && !*q) error("warning: `currentfile closefile' line too long"); else if (q != p) { if (*q != '\n') error("text after `currentfile closefile' ignored"); *p++ = '\n'; *p++ = '\0'; } eexec_string(line); break; } eexec_string(line); /* output line data */ if (start_charstring) { if (!cs_start[0]) fatal_error("couldn't find charstring start command"); parse_charstring(); } } /* Handle remaining PostScript after the eexec section */ if (in_eexec) eexec_end(); /* There may be additional code. */ while (!feof(ifp) && !ferror(ifp)) { t1utils_getline(); eexec_string(line); } if (pfb) pfb_writer_end(&w); /* the end! */ if (!ever_active) error("warning: no charstrings found in input file"); fclose(ifp); fclose(ofp); return 0; } t1utils-1.37/t1mac.c0000644000076400007640000007314011546355025011166 00000000000000/* t1mac * * This program converts Type 1 fonts in PFA or PFB format into Macintosh Type * 1 fonts stored in MacBinary (I or II), AppleSingle, AppleDouble, BinHex, or * raw resource fork format. * * Copyright (c) 2000-2003 by Eddie Kohler, all rights reserved. * * Permission is hereby granted to use, modify, and distribute this program * for any purpose provided this copyright notice and the one below remain * intact. */ /* Note: this is ANSI C. */ #ifdef HAVE_CONFIG_H # include #endif #if defined(_MSDOS) || defined(_WIN32) # include # include #endif #include #include #include #include #include #include #include #include #include #include "t1lib.h" #ifdef __cplusplus extern "C" { #endif typedef unsigned char byte; /* resource fork layout */ #define RFORK_HEADERLEN 256 #define RFORK_MAP_RESERVEDLEN 22 #define RFORK_MAP_HEADERLEN 28 #define RFORK_RTYPE_LEN 8 #define RFORK_RSRC_LEN 12 /* Macintosh times are # seconds since 1/1/1904, not 1/1/1970 */ #define MAC_TIME_DELTA 2082844800 /* POST resource information */ #define POST_ASCII 1 #define POST_BINARY 2 #define POST_END 5 /* Adobe font file information */ #define T1_FILETYPE 0x4C57464E /* LWFN */ #define T1_FILECREATOR 0x54315554 /* T1UT */ #define T1_FINDERFLAGS 33 /* Bundle + Inited */ #define MAX_RSRC_LEN 2048 static byte rbuf[MAX_RSRC_LEN]; static int rbufpos; static int blocktyp; static char *font_name; /* information about the resources being built */ typedef struct Rsrc { int32_t type; int id; int attrs; int data_offset; uint32_t data_len; int next_in_type; int next_type; } Rsrc; static Rsrc *rsrc = 0; static int nrsrc = 0; static int rsrc_cap = 0; static int cur_post_id = 0; /* output resource fork */ static FILE *rfork_f = 0; /* ICN# data */ static const unsigned char icon_bw_data[] = { 0,0,0,0,255,255,255,255,128,0,0,1,128,0,0,1,128,0,0,1, 128,0,0,1,128,0,0,1,128,0,0,1,128,0,0,1,128,0,0,33, 128,0,0,97,128,0,0,225,128,0,1,225,128,0,3,225,128,0,7,225, 128,0,15,225,128,0,31,225,128,0,55,225,159,128,103,249,144,128,199,9, 240,129,135,15,0,131,7,0,0,134,7,0,15,140,7,240,8,31,255,240, 8,63,255,240,8,96,7,240,8,192,7,240,9,192,15,240,11,224,31,240, 15,240,63,240,15,255,255,240,0,0,0,0,255,255,255,255,255,255,255,255, 255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255, 255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255, 255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255, 255,255,255,255,240,255,255,15,240,255,255,15,0,255,255,0,0,255,255,0, 15,255,255,240,15,255,255,240,15,255,255,240,15,255,255,240,15,255,255,240, 15,255,255,240,15,255,255,240,15,255,255,240,15,255,255,240,}; static const unsigned char small_icon_bw_data[] = { 255,255,128,1,128,1,128,1,128,5,128,13,128,29,128,61,128,125,184,253, 201,179,59,60,39,252,44,60,60,124,63,252,255,255,255,255,255,255,255,255, 255,255,255,255,255,255,255,255,255,255,255,255,207,243,63,252,63,252,63,252, 63,252,63,252,}; static const unsigned char icon_8_data[] = { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,105, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,5,92,92,92,92,105, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,5,5,92,92,92,92,105,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,5,5,5,92, 92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,5,5,5,5,92,92,92,92,105,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,5,5, 5,5,5,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,5,5,5,5,5,5,92,92,92,92,105, 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 5,5,5,5,5,5,5,92,92,92,92,105,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,5,5,5,5,5,5,5,5,92, 92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,5,5,92,5,5,5,5,5,5,92,92,92,92,105,92,92,92,105, 105,105,105,105,92,92,92,92,92,92,92,92,92,5,5,92,92,5,5,105, 105,105,105,105,92,92,92,105,92,92,92,105,0,0,0,0,92,92,92,92, 92,92,92,92,5,5,92,92,92,5,5,105,0,0,0,0,92,92,92,105, 105,105,105,105,0,0,0,0,92,92,92,92,92,92,92,5,5,92,92,92, 92,5,5,105,0,0,0,0,105,105,105,105,0,0,0,0,0,0,0,0, 92,92,92,92,92,92,5,5,92,92,92,92,92,5,5,105,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,92,92,92,92,92,5,5,92, 92,92,92,92,92,5,5,105,0,0,0,0,0,0,0,0,0,0,0,0, 92,92,92,92,92,92,92,92,5,5,92,92,92,92,92,92,92,5,5,5, 5,5,5,92,0,0,0,0,0,0,0,0,92,92,92,92,92,92,92,5, 5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,105,0,0,0,0, 0,0,0,0,92,92,92,92,92,92,5,5,5,5,5,5,5,5,5,5, 5,5,5,5,5,5,5,105,0,0,0,0,0,0,0,0,92,92,92,92, 92,5,5,92,92,92,92,92,92,92,92,92,92,5,5,5,5,5,5,105, 0,0,0,0,0,0,0,0,92,92,92,92,5,5,92,92,92,92,92,92, 92,92,92,92,92,5,5,5,5,5,5,105,0,0,0,0,0,0,0,0, 92,92,92,5,5,5,92,92,92,92,92,92,92,92,92,92,5,5,5,5, 5,5,5,105,0,0,0,0,0,0,0,0,92,92,5,5,5,5,5,92, 92,92,92,92,92,92,92,5,5,5,5,5,5,5,5,105,0,0,0,0, 0,0,0,0,92,5,5,5,5,5,5,5,92,92,92,92,92,92,5,5, 5,5,5,5,5,5,5,105,0,0,0,0,0,0,0,0,92,105,105,105, 105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105,105, 0,0,0,0,}; static const unsigned char small_icon_8_data[] = { 92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92, 92,92,92,92,92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92, 92,92,92,105,92,92,92,92,92,92,92,92,92,92,92,92,92,5,92,105, 92,92,92,92,92,92,92,92,92,92,92,92,5,5,92,105,92,92,92,92, 92,92,92,92,92,92,92,5,5,5,92,105,92,92,92,92,92,92,92,92, 92,92,5,5,5,5,92,105,92,92,92,92,92,92,92,92,92,5,92,5, 5,5,92,105,92,105,105,105,92,92,92,92,5,92,92,5,105,105,92,105, 92,105,0,0,92,92,92,5,92,92,92,5,0,0,105,105,0,0,92,92, 92,92,5,92,92,92,92,5,5,5,0,0,0,0,92,92,92,5,5,5, 5,5,5,5,5,5,0,0,0,0,92,92,5,92,92,92,92,92,92,5, 5,5,0,0,0,0,92,5,5,92,92,92,92,92,5,5,5,5,0,0, 0,0,5,5,5,5,105,105,105,5,5,5,5,5,0,0,}; static const unsigned char icon_4_data[] = { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,69,69,69,69, 69,69,69,69,69,69,69,69,69,69,69,69,84,84,84,84,84,84,84,84, 84,84,84,84,84,84,84,85,69,69,69,69,69,69,69,69,69,69,69,69, 69,69,69,69,84,84,84,84,84,84,84,84,84,84,84,84,84,84,84,85, 69,69,69,69,69,69,69,69,69,69,69,69,69,69,69,69,84,84,84,84, 84,84,84,84,84,84,84,84,84,84,84,85,69,69,69,69,69,69,69,69, 69,69,69,69,69,69,69,69,84,84,84,84,84,84,84,84,84,84,84,84, 84,84,84,85,69,69,69,69,69,69,69,69,69,69,69,69,69,21,69,69, 84,84,84,84,84,84,84,84,84,84,84,84,81,20,84,85,69,69,69,69, 69,69,69,69,69,69,69,69,17,21,69,69,84,84,84,84,84,84,84,84, 84,84,84,81,17,20,84,85,69,69,69,69,69,69,69,69,69,69,69,17, 17,21,69,69,84,84,84,84,84,84,84,84,84,84,81,17,17,20,84,85, 69,69,69,69,69,69,69,69,69,69,17,17,17,21,69,69,84,84,84,84, 84,84,84,84,84,81,17,17,17,20,84,85,69,69,69,69,69,69,69,69, 69,17,65,17,17,21,69,69,84,85,85,85,84,84,84,84,81,20,81,21, 85,85,84,85,69,69,0,0,69,69,69,69,17,69,65,21,0,0,69,69, 85,85,0,0,84,84,84,81,20,84,81,21,0,0,85,85,0,0,0,0, 69,69,69,17,69,69,65,21,0,0,0,0,0,0,0,0,84,84,81,20, 84,84,81,21,0,0,0,0,0,0,69,69,69,69,17,69,69,69,65,17, 17,30,0,0,0,0,84,84,84,81,17,17,17,17,17,17,17,21,0,0, 0,0,69,69,69,17,17,17,17,17,17,17,17,21,0,0,0,0,84,84, 81,20,84,84,84,84,81,17,17,21,0,0,0,0,69,69,17,69,69,69, 69,69,65,17,17,21,0,0,0,0,84,81,17,84,84,84,84,84,17,17, 17,21,0,0,0,0,69,17,17,21,69,69,69,65,17,17,17,21,0,0, 0,0,81,17,17,17,84,84,84,17,17,17,17,21,0,0,0,0,229,85, 85,85,85,85,85,85,85,85,85,85,0,0,}; static const unsigned char small_icon_4_data[] = { 84,84,84,84,84,84,84,85,69,69,69,69,69,69,69,69,84,84,84,84, 84,84,84,85,69,69,69,69,69,69,69,69,84,84,84,84,84,84,81,85, 69,69,69,69,69,69,17,69,84,84,84,84,84,81,17,85,69,69,69,69, 69,17,17,69,84,84,84,84,81,81,17,85,69,85,69,69,21,65,85,69, 85,0,84,81,84,81,0,85,0,69,69,21,69,65,17,0,0,84,81,17, 17,17,17,0,0,69,21,69,69,65,17,0,0,81,20,84,84,17,17,0, 0,17,17,85,81,17,17,0,}; /* fseek with fatal_error */ static void reposition(FILE *fi, int32_t absolute) { if (fseek(fi, absolute, 0) == -1) fatal_error("can't seek to position %d", absolute); } /* Some functions to write one, two, three, and four byte integers in 68000 byte order (most significant byte first). */ static void write_one(int c, FILE *f) { putc(c, f); } static void write_two(int c, FILE *f) { putc((c >> 8) & 255, f); putc(c & 255, f); } static void write_three(int32_t c, FILE *f) { putc((c >> 16) & 255, f); putc((c >> 8) & 255, f); putc(c & 255, f); } static void write_four(int32_t c, FILE *f) { putc((c >> 24) & 255, f); putc((c >> 16) & 255, f); putc((c >> 8) & 255, f); putc(c & 255, f); } /* Some functions to store one, two, three, and four byte integers in 68000 byte order (most significant byte first). */ static void store_one(int c, char *s) { s[0] = (char)(c & 255); } static void store_two(int c, char *s) { s[0] = (char)((c >> 8) & 255); s[1] = (char)(c & 255); } static void store_four(int32_t c, char *s) { s[0] = (char)((c >> 24) & 255); s[1] = (char)((c >> 16) & 255); s[2] = (char)((c >> 8) & 255); s[3] = (char)(c & 255); } static void output_new_rsrc(const char *rtype, int rid, int attrs, const char *data, uint32_t len) { Rsrc *r; if (nrsrc >= rsrc_cap) { rsrc_cap = (rsrc_cap ? rsrc_cap * 2 : 256); r = (Rsrc *)malloc(sizeof(Rsrc) * rsrc_cap); if (!r) fatal_error("out of memory"); memcpy(r, rsrc, sizeof(Rsrc) * nrsrc); free(rsrc); rsrc = r; } r = &rsrc[nrsrc]; nrsrc++; /* prepare resource record */ { const unsigned char *b = (const unsigned char *)rtype; r->type = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3]; } r->id = rid; r->attrs = attrs; if (nrsrc == 1) r->data_offset = 0; else r->data_offset = rsrc[nrsrc-2].data_offset + rsrc[nrsrc-2].data_len + 4; r->data_len = len; r->next_in_type = r->next_type = -2; /* resource consists of length, then data */ write_four(r->data_len, rfork_f); fwrite(data, 1, len, rfork_f); } static void init_current_post(void) { rbufpos = 2; cur_post_id = 501; blocktyp = POST_ASCII; } static void output_current_post(void) { if (blocktyp != POST_END && rbufpos <= 2) return; rbuf[0] = blocktyp; rbuf[1] = 0; output_new_rsrc("POST", cur_post_id, 0, (char *)rbuf, rbufpos); rbufpos = 2; cur_post_id++; } /* font_reader functions */ static void t1mac_output_data(byte *s, int len) { while (len > 0) { int n; /* In some Mac fonts, the ASCII sections terminate with a line-end */ if (rbufpos >= MAX_RSRC_LEN || (blocktyp == POST_ASCII && len + rbufpos > MAX_RSRC_LEN && rbufpos)) output_current_post(); n = (len + rbufpos <= MAX_RSRC_LEN ? len : MAX_RSRC_LEN - rbufpos); memcpy(rbuf + rbufpos, s, n); rbufpos += n; s += n; len -= n; } } static void t1mac_output_ascii(char *s, int len) { if (blocktyp == POST_BINARY) { output_current_post(); blocktyp = POST_ASCII; } /* Mac line endings */ if (len > 0 && s[len-1] == '\n') s[len-1] = '\r'; t1mac_output_data((byte *)s, len); if (strncmp(s, "/FontName", 9) == 0) { for (s += 9; isspace(*s); s++) ; if (*s == '/') { const char *t = ++s; while (*t && !isspace(*t)) t++; free(font_name); font_name = (char *)malloc(t - s + 1); memcpy(font_name, s, t - s); font_name[t - s] = 0; } } } static void t1mac_output_binary(unsigned char *s, int len) { if (blocktyp == POST_ASCII) { output_current_post(); blocktyp = POST_BINARY; } t1mac_output_data(s, len); } static void t1mac_output_end(void) { output_current_post(); blocktyp = POST_END; output_current_post(); } /* finish off the resource fork */ static uint32_t complete_rfork(void) { uint32_t reflist_offset, total_data_len; uint32_t typelist_len; int i, j, ntypes; /* analyze resources */ { int last_type = -1; ntypes = 0; for (i = 0; i < nrsrc; i++) if (rsrc[i].next_in_type == -2) { int last = -1; if (last_type >= 0) rsrc[last_type].next_type = i; for (j = i; j < nrsrc; j++) if (rsrc[j].type == rsrc[i].type) { if (last >= 0) rsrc[last].next_in_type = j; last = j; } rsrc[last].next_in_type = -1; last_type = i; ntypes++; } } /* have just finished writing data */ /* now write resource map */ for (i = 0; i < RFORK_MAP_RESERVEDLEN; i++) putc(0, rfork_f); /* reserved */ write_two(0, rfork_f); /* resource fork attributes */ typelist_len = ntypes * RFORK_RTYPE_LEN + 2; write_two(RFORK_MAP_HEADERLEN, rfork_f); /* offset from start of map to typelist */ write_two(RFORK_MAP_HEADERLEN + typelist_len + nrsrc * RFORK_RSRC_LEN, rfork_f); /* offset from start of map to namelist */ /* output type map */ write_two(ntypes - 1, rfork_f);/* number of types - 1 */ reflist_offset = typelist_len; for (i = 0; i >= 0; i = rsrc[i].next_type) { int n_in_type = 0; for (j = i; j >= 0; j = rsrc[j].next_in_type) n_in_type++; write_four(rsrc[i].type, rfork_f); /* resource type */ write_two(n_in_type - 1, rfork_f); /* number in type - 1 */ write_two(reflist_offset, rfork_f); /* offset to reflist from start of typelist */ reflist_offset += n_in_type * RFORK_RSRC_LEN; } /* output reference list */ for (i = 0; i >= 0; i = rsrc[i].next_type) for (j = i; j >= 0; j = rsrc[j].next_in_type) { write_two(rsrc[j].id, rfork_f); /* ID */ write_two(-1, rfork_f); /* offset to name */ write_one(rsrc[j].attrs, rfork_f); /* attributes */ write_three(rsrc[j].data_offset, rfork_f); /* offset to data from start of data */ write_four(0, rfork_f); /* reserved */ } /* finally, patch up resource fork header */ { total_data_len = rsrc[nrsrc-1].data_offset + rsrc[nrsrc-1].data_len + 4; reposition(rfork_f, 0); write_four(RFORK_HEADERLEN, rfork_f); /* offset from rfork to data */ write_four(RFORK_HEADERLEN + total_data_len, rfork_f); /* offset from rfork to map */ write_four(total_data_len, rfork_f); /* length of data */ write_four(RFORK_MAP_HEADERLEN + reflist_offset, rfork_f); /* length of map */ } return RFORK_HEADERLEN + total_data_len + RFORK_MAP_HEADERLEN + reflist_offset; } /* write a MacBinary II file */ static void output_raw(FILE *rf, int32_t len, FILE *f) { char buf[2048]; reposition(rf, 0); while (len > 0) { int n = (len < 2048 ? len : 2048); fread(buf, 1, n, rf); fwrite(buf, 1, n, f); len -= n; } } static void output_macbinary(FILE *rf, int32_t rf_len, const char *filename, FILE *f) { int i, len = strlen(filename); char buf[128]; if (len < 1 || len > 63) fatal_error("filename length must be between 1 and 63"); store_one(0, buf+0); /* old version number */ store_one(len, buf+1); /* filename length */ memset(buf+2, 0, 63); /* filename padding */ memcpy(buf+2, filename, len); /* filename */ store_four(T1_FILETYPE, buf+65); /* file type */ store_four(T1_FILECREATOR, buf+69); /* file creator */ store_one(T1_FINDERFLAGS, buf+73); /* finder flags */ store_one(0, buf+74); /* zero byte */ store_two(0, buf+75); /* vertical position in window */ store_two(0, buf+77); /* horizontal position in window */ store_two(0, buf+79); /* window or folder ID */ store_one(0, buf+81); /* protected flag */ store_one(0, buf+82); /* zero byte */ store_four(0, buf+83); /* data fork length */ store_four(rf_len, buf+87); /* resource fork length */ { time_t t = time(0) + MAC_TIME_DELTA; store_four(t, buf+91); /* creation date */ store_four(t, buf+95); /* modification date */ } store_two(0, buf+99); /* GetInfo comment length */ store_one(0, buf+101); /* finder flags part 2 */ memset(buf+102, 0, 116 - 102); /* padding */ store_four(0, buf+116); /* total length when unpacked */ store_two(0, buf+120); /* length of secondary header */ store_one(129, buf+122); /* version number */ store_one(129, buf+123); /* minimum acceptable version number */ store_two(crcbuf(0, 124, buf), buf+124); /* CRC */ store_two(0, buf+126); /* padding to 128 bytes */ /* write out the header */ fwrite(buf, 1, 128, f); /* now write resource fork */ output_raw(rf, rf_len, f); for (i = rf_len % 128; i && i < 128; i++) putc(0, f); } /* write an AppleSingle file */ #define APPLESINGLE_MAGIC 0x00051600 #define APPLEDOUBLE_MAGIC 0x00051607 #define APPLESINGLE_VERSION 0x00020000 #define APPLESINGLE_TIME_DELTA 883612800 #define APPLESINGLE_HEADERLEN 26 #define APPLESINGLE_ENTRYLEN 12 #define APPLESINGLE_DFORK_ENTRY 1 #define APPLESINGLE_RFORK_ENTRY 2 #define APPLESINGLE_DATES_ENTRY 8 #define APPLESINGLE_DATES_LEN 16 #define APPLESINGLE_FINDERINFO_ENTRY 9 #define APPLESINGLE_FINDERINFO_LEN 32 #define APPLESINGLE_REALNAME_ENTRY 3 static void output_applesingle(FILE *rf, int32_t rf_len, const char *filename, FILE *f, int appledouble) { uint32_t offset; int i, nentries, len = strlen(filename); if (appledouble) /* magic number */ write_four(APPLEDOUBLE_MAGIC, f); else write_four(APPLESINGLE_MAGIC, f); write_four(APPLESINGLE_VERSION, f); /* version number */ for (i = 0; i < 4; i++) write_four(0, f); /* filler */ nentries = (appledouble ? 4 : 5); write_two(nentries, f); /* number of entries */ /* real name entry */ offset = APPLESINGLE_HEADERLEN + nentries * APPLESINGLE_ENTRYLEN; write_four(APPLESINGLE_REALNAME_ENTRY, f); write_four(offset, f); write_four(len, f); offset += len; /* time entry */ write_four(APPLESINGLE_DATES_ENTRY, f); write_four(offset, f); write_four(APPLESINGLE_DATES_LEN, f); offset += APPLESINGLE_DATES_LEN; /* finder info entry */ write_four(APPLESINGLE_FINDERINFO_ENTRY, f); write_four(offset, f); write_four(APPLESINGLE_FINDERINFO_LEN, f); offset += APPLESINGLE_FINDERINFO_LEN; /* resource fork entry */ write_four(APPLESINGLE_RFORK_ENTRY, f); write_four(offset, f); write_four(rf_len, f); offset += rf_len; /* data fork entry */ if (!appledouble) { write_four(APPLESINGLE_DFORK_ENTRY, f); write_four(offset, f); write_four(0, f); } /* real name data */ fwrite(filename, 1, len, f); /* time data */ i = time(0) - APPLESINGLE_TIME_DELTA; write_four(i, f); /* creation date */ write_four(i, f); /* modification date */ write_four(0x80000000, f); /* backup date */ write_four(0, f); /* access date */ /* finder info data */ write_four(T1_FILETYPE, f); /* file type */ write_four(T1_FILECREATOR, f); /* file creator */ write_one(T1_FINDERFLAGS, f); /* finder flags */ write_one(0, f); /* extended finder flags */ write_two(0, f); /* vertical position in window */ write_two(0, f); /* horizontal position in window */ write_two(0, f); /* window or folder ID */ write_four(0, f); /* icon ID and reserved */ write_four(0, f); /* reserved */ write_one(0, f); /* script flag */ write_one(0, f); /* reserved */ write_two(0, f); /* comment ID */ write_four(0, f); /* put away */ /* resource fork data */ output_raw(rf, rf_len, f); } /* write a BinHex file */ static void binhex_buffer(const byte *s, int len, FILE *f) { static int col = 1; static int bits = 0; static int bitspos = 2; static const char *table = "!\"#$%&'()*+,-012345689@ABCDEFGHIJKLMNPQRSTUVXYZ[`abcdefhijklmpqr"; byte buf[5]; int c, i, left; if (!s && bitspos > 2) { /* output the remaining bits */ s = (const byte *)"\0"; len = 1; } for (left = len; left > 0; left--, s++) { int pos; if (s[0] == 0x90) { buf[0] = 0x90; buf[1] = 0x00; pos = 2; } else { buf[0] = s[0]; pos = 1; } /* find a run */ if (left > 2 && s[0] == s[1] && s[0] == s[2]) { for (i = 3; i < left && i < 255; i++) if (s[i] != s[0]) break; buf[pos] = 0x90; buf[pos+1] = i; pos += 2; s += i - 1; left -= i - 1; } /* store those characters */ for (i = 0; i < pos; i++) { bits |= buf[i]; while (bitspos >= 0) { c = (bits >> bitspos) & 0x3F; putc(table[c], f); if (++col == 63) { putc('\n', f); col = 0; } bitspos -= 6; } bits <<= 8; bitspos += 8; } } } static void output_binhex(FILE *rf, int32_t rf_len, const char *filename, FILE *f) { int crc, len = strlen(filename); char buf[2048]; if (len < 1 || len > 63) fatal_error("filename length must be between 1 and 63"); store_one(len, buf+0); /* filename length */ memcpy(buf+1, filename, len); /* filename */ store_one(0, buf+1+len); /* version */ store_four(T1_FILETYPE, buf+2+len); /* file type */ store_four(T1_FILECREATOR, buf+6+len); /* file creator */ store_one(T1_FINDERFLAGS, buf+10+len); /* finder flags */ store_one(0, buf+11+len); /* extended finder flags */ store_four(0, buf+12+len); /* length of data fork */ store_four(rf_len, buf+16+len); /* length of resource fork */ store_two(crcbuf(0, 20+len, buf), buf+20+len); /* CRC */ store_two(0, buf+22+len); /* data fork CRC */ /* output BinHex comment */ fputs("(This file must be converted with BinHex 4.0)\n:", f); /* BinHex the header */ binhex_buffer((const byte *)buf, 24+len, f); /* resource fork data */ reposition(rf, 0); crc = 0; while (rf_len > 0) { int n = (rf_len < 2048 ? rf_len : 2048); fread(buf, 1, n, rf); crc = crcbuf(crc, n, buf); /* update CRC */ binhex_buffer((const byte *)buf, n, f); rf_len -= n; } store_two(crc, buf); /* resource fork CRC */ binhex_buffer((const byte *)buf, 2, f); binhex_buffer(0, 0, f); /* get rid of any remaining bits */ fputs(":\n", f); /* trailer */ } /***** * command line **/ #define OUTPUT_OPT 301 #define VERSION_OPT 302 #define HELP_OPT 303 #define MACBINARY_OPT 304 #define RAW_OPT 305 #define APPLESINGLE_OPT 306 #define APPLEDOUBLE_OPT 307 #define BINHEX_OPT 308 #define FILENAME_OPT 309 static Clp_Option options[] = { { "appledouble", 0, APPLEDOUBLE_OPT, 0, 0 }, { "applesingle", 0, APPLESINGLE_OPT, 0, 0 }, { "binhex", 0, BINHEX_OPT, 0, 0 }, { "help", 0, HELP_OPT, 0, 0 }, { "macbinary", 0, MACBINARY_OPT, 0, 0 }, { "filename", 'n', FILENAME_OPT, Clp_ValString, 0 }, { "output", 'o', OUTPUT_OPT, Clp_ValString, 0 }, { "raw", 'r', RAW_OPT, 0, 0 }, { "version", 0, VERSION_OPT, 0, 0 }, }; static const char *program_name; void fatal_error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); exit(1); } void error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); } static void short_usage(void) { fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ Try `%s --help' for more information.\n", program_name, program_name); } static void usage(void) { printf("\ `T1mac' translates a PostScript Type 1 font from PFA or PFB format into\n\ Macintosh Type 1 format. The result can be written in MacBinary II format (the\n\ default), AppleSingle format, AppleDouble format, or BinHex format, or as a\n\ raw resource fork. It is sent to the standard output unless an OUTPUT file is\n\ given.\n\ \n\ Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ \n\ Options:\n\ -r, --raw Output is a raw Macintosh resource fork.\n\ --macbinary Output is in MacBinary format (default).\n\ --applesingle Output is in AppleSingle format.\n\ --appledouble Output is in AppleDouble format.\n\ --binhex Output is in BinHex format.\n\ -n, --filename NAME Macintosh font filename will be NAME.\n\ -o, --output FILE Write output to FILE.\n\ -h, --help Print this message and exit.\n\ --version Print version number and warranty and exit.\n\ \n\ Report bugs to .\n", program_name); } #ifdef __cplusplus } #endif int main(int argc, char *argv[]) { int i, c; FILE *ifp = 0, *ofp = 0; const char *ifp_filename = ""; const char *ofp_filename = ""; const char *set_font_name = 0; struct font_reader fr; uint32_t rfork_len; int raw = 0, macbinary = 1, applesingle = 0, appledouble = 0, binhex = 0; Clp_Parser *clp = Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); program_name = Clp_ProgramName(clp); /* interpret command line arguments using CLP */ while (1) { int opt = Clp_Next(clp); switch (opt) { case RAW_OPT: raw = 1; macbinary = applesingle = appledouble = binhex = 0; break; case MACBINARY_OPT: macbinary = 1; raw = applesingle = appledouble = binhex = 0; break; case APPLESINGLE_OPT: applesingle = 1; raw = macbinary = appledouble = binhex = 0; break; case APPLEDOUBLE_OPT: appledouble = 1; raw = macbinary = applesingle = binhex = 0; break; case BINHEX_OPT: binhex = 1; raw = macbinary = applesingle = appledouble = 0; break; output_file: case OUTPUT_OPT: if (ofp) fatal_error("output file already specified"); if (strcmp(clp->vstr, "-") == 0) ofp = stdout; else { ofp_filename = clp->vstr; ofp = fopen(ofp_filename, "wb"); if (!ofp) fatal_error("%s: %s", ofp_filename, strerror(errno)); } break; case FILENAME_OPT: if (set_font_name) fatal_error("Macintosh font filename already specified"); set_font_name = clp->vstr; break; case HELP_OPT: usage(); exit(0); break; case VERSION_OPT: printf("t1mac (LCDF t1utils) %s\n", VERSION); printf("Copyright (C) 2000-2010 Eddie Kohler et al.\n\ This is free software; see the source for copying conditions.\n\ There is NO warranty, not even for merchantability or fitness for a\n\ particular purpose.\n"); exit(0); break; case Clp_NotOption: if (ifp && ofp) fatal_error("too many arguments"); else if (ifp) goto output_file; if (strcmp(clp->vstr, "-") == 0) ifp = stdin; else { ifp_filename = clp->vstr; ifp = fopen(clp->vstr, "r"); if (!ifp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case Clp_Done: goto done; case Clp_BadOption: short_usage(); exit(1); break; } } done: if (!ifp) ifp = stdin; if (!ofp) ofp = stdout; #if defined(_MSDOS) || defined(_WIN32) /* As we are processing a PFB (binary) output */ /* file, we must set its file mode to binary. */ _setmode(_fileno(ofp), _O_BINARY); #endif /* prepare font reader */ fr.output_ascii = t1mac_output_ascii; fr.output_binary = t1mac_output_binary; fr.output_end = t1mac_output_end; /* prepare resource fork file */ rfork_f = tmpfile(); if (!rfork_f) fatal_error("cannot open temorary file: %s", strerror(errno)); for (i = 0; i < RFORK_HEADERLEN; i++) putc(0, rfork_f); init_current_post(); /* peek at first byte to see if it is the PFB marker 0x80 */ c = getc(ifp); ungetc(c, ifp); /* do the file */ if (c == PFB_MARKER) process_pfb(ifp, ifp_filename, &fr); else if (c == '%') process_pfa(ifp, ifp_filename, &fr); else fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); if (ifp != stdin) fclose(ifp); /* check if anything was read */ if (nrsrc == 0) error("no POST resources written -- are you sure this was a font?"); /* output large B/W icon */ output_new_rsrc("ICN#", 256, 32, (const char *)icon_bw_data, 256); /* output FREF */ output_new_rsrc("FREF", 256, 32, "LWFN\0\0\0", 7); /* output BNDL */ output_new_rsrc("BNDL", 256, 32, "T1UT\0\0\0\1FREF\0\0\0\0\1\0ICN#\0\0\0\0\1\0", 28); /* output other icons */ output_new_rsrc("icl8", 256, 32, (const char *)icon_8_data, 1024); output_new_rsrc("icl4", 256, 32, (const char *)icon_4_data, 512); output_new_rsrc("ics#", 256, 32, (const char *)small_icon_bw_data, 64); output_new_rsrc("ics8", 256, 32, (const char *)small_icon_8_data, 256); output_new_rsrc("ics4", 256, 32, (const char *)small_icon_4_data, 128); /* output T1UT (signature) */ output_new_rsrc("T1UT", 0, 0, "DConverted by t1mac (t1utils) \251Eddie Kohler http://www.lcdf.org/type/", 69); /* finish off resource file */ rfork_len = complete_rfork(); /* prepare font name */ if (!set_font_name && font_name) { int part = 0, len = 0; char *x, *s; for (x = s = font_name; *s; s++) if (isupper(*s) || isdigit(*s)) { *x++ = *s; part++; len = 1; } else if (islower(*s)) { if (len < (part <= 1 ? 5 : 3)) *x++ = *s; len++; } *x++ = 0; set_font_name = font_name; } else if (!set_font_name) set_font_name = "Unknown Font"; /* now, output the file */ if (macbinary) output_macbinary(rfork_f, rfork_len, set_font_name, ofp); else if (raw) output_raw(rfork_f, rfork_len, ofp); else if (applesingle || appledouble) output_applesingle(rfork_f, rfork_len, set_font_name, ofp, appledouble); else if (binhex) output_binhex(rfork_f, rfork_len, set_font_name, ofp); else fatal_error("strange output format"); fclose(rfork_f); if (ofp != stdout) fclose(ofp); return 0; } t1utils-1.37/t1binary.10000644000076400007640000000175111602730475011626 00000000000000.ds V 1.37 .de M .BR "\\$1" "(\\$2)\\$3" .. .TH T1BINARY 1 "" "Version \*V" .SH NAME t1binary \- convert PostScript Type 1 font from ASCII to binary .SH SYNOPSIS .B t1binary \%[\fB\-l\fR \fIlength\fR] \%[\fIinput\fR [\fIoutput\fR]] .SH DESCRIPTION .B t1binary converts Adobe Type 1 font programs in PFA (hexadecimal) format to PFB (binary) format. If the file .I output is not specified output goes to the standard output. If the file .I input is not specified input comes from the standard input. .SH OPTIONS .TP 5 .BI \-\-block\-length= "length\fR, " \-l " length" Set the maximum length of sections in PFB output to .I length. The default length is as large as memory allows. .SH "SEE ALSO" .LP .M t1ascii 1 , .M t1unmac 1 , .M t1mac 1 , .M t1disasm 1 , .M t1asm 1 .LP .I "Adobe Type 1 Font Format" .SH AUTHORS Lee Hetherington (ilh@lcs.mit.edu) .br Eddie Kohler (ekohler@gmail.com) .PP Ported to Microsoft C/C++ Compiler and MS-DOS operating system by Kai-Uwe Herbing (herbing@netmbx.netmbx.de). t1utils-1.37/missing0000755000076400007640000002557711163207451011421 00000000000000#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2006-05-10.23 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). case $1 in lex|yacc) # Not GNU programs, they don't have --version. ;; tar) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $1 in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: t1utils-1.37/t1unmac.10000644000076400007640000000410511602730475011441 00000000000000.ds V 1.37 .de M .BR "\\$1" "(\\$2)\\$3" .. .TH T1UNMAC 1 "" "Version \*V" .SH NAME t1unmac \- translate a Mac PostScript Type 1 font into PFA or PFB format .SH SYNOPSIS .B t1unmac \%[\fB\-a\fR|\fB\-b\fR] \%[\fB\-r\fR] \%[\fIinput\fR [\fIoutput\fR]] .SH DESCRIPTION .B t1unmac extracts POST resources from a Macintosh PostScript font file and creates a PFA (hexadecimal) or PFB (binary) font file. The file .I input should be in MacBinary I or II, AppleSingle, AppleDouble, or BinHex format, or it can be a raw resource fork. If the file is a raw resource fork, you need to give the `\-\-raw' option; otherwise .B t1unmac should automatically figure out what kind of file you have. If the file .I output is not specified output goes to the standard output. .SH OPTIONS .TP 5 .BR \-\-pfa ", " \-a Output in PFA (ASCII) format. .TP 5 .BR \-\-pfb ", " \-b Output in PFB (binary) format. This is the default. .TP 5 .BR \-\-raw ", " \-r Indicates that the input is a raw resource fork. .TP 5 .BR \-\-macbinary Indicates that the input is in MacBinary I or II format. .TP 5 .BR \-\-applesingle Indicates that the input is in AppleSingle format. .TP 5 .BR \-\-appledouble Indicates that the input is in AppleDouble format. .TP 5 .BR \-\-binhex Indicates that the input is in BinHex 4.0 format. .TP .BI \-\-block\-length= "num\fR, " \-l " num" PFB only: Set the maximum output block length to .I num. The default length is as large as memory allows. .TP .BI \-\-line\-length= "num\fR, " \-l " num" PFA only: Set the maximum length of encrypted lines in the output to .I num. (These are the lines consisting wholly of hexadecimal digits.) The default is 64. .SH EXAMPLES .LP On Mac OS X, you can use .B t1unmac to translate a font into PFA or PFB format as follows: .nf % \fBt1unmac\fR \-\-raw FONTFILENAME/..namedfork/rsrc > OUTPUT .fi .SH "SEE ALSO" .LP .M t1mac 1 , .M t1ascii 1 , .M t1binary 1 , .M t1asm 1 , .M t1disasm 1 .SH AUTHORS Lee Hetherington (ilh@lcs.mit.edu) .br Eddie Kohler (ekohler@gmail.com) .PP Ported to Microsoft C/C++ Compiler and MS-DOS operating system by Kai-Uwe Herbing (herbing@netmbx.netmbx.de). t1utils-1.37/t1disasm.10000644000076400007640000000404511602730475011621 00000000000000.ds V 1.37 .de M .BR "\\$1" "(\\$2)\\$3" .. .TH T1DISASM 1 "" "Version \*V" .SH NAME t1disasm \- disassemble PostScript Type 1 font .SH SYNOPSIS .B t1disasm \%[\fIinput\fR [\fIoutput\fR]] .SH DESCRIPTION .B t1disasm disassembles Adobe Type 1 font programs in either PFA (hexadecimal) or PFB (binary) formats into human-readable form. If the file .I output is not specified output goes to the standard output. If the file .I input is not specified input comes from the standard input. .B t1disasm performs eexec and charstring decryption as specified in the ``black book'', .I "Adobe Type 1 Font Format." Additionally, the charstring binary tokens are expanded into human-readable text form, using the names given in the black book and later documents describing Type 2 opcodes. .SH EXAMPLES .LP .nf % t1disasm Utopia-Regular.pfb Utopia-Regular.raw % t1disasm Utopia-Regular.pfa Utopia-Regular.raw .fi In .B Subrs entries in Utopia-Regular.raw will look like .RS .nf .ft B dup 5 { 8 111 vstem \-12 128 hstem 707 \-20 hstem return } | .ft R .fi .RE and the .B CharStrings entries like .RS .nf .ft B /exclam { 58 242 hsbw 6 callsubr 5 4 callsubr 63 707 rmoveto \-54 0 \-5 \-22 4 \-45 rrcurveto 40 \-431 rlineto 29 hlineto 42 431 rlineto 4 45 \-5 22 \-55 0 rrcurveto closepath 6 4 callsubr \-719 vmoveto 243 callsubr endchar } |\- .ft R .fi .RE .SH "SEE ALSO" .LP .M t1asm 1 , .M t1ascii 1 , .M t1binary 1 , .M t1unmac 1 , .M t1mac 1 .LP .I "Adobe Type 1 Font Format" is available free from Adobe as a PDF file: http://partners.adobe.com/asn/developer/PDFS/TN/T1_SPEC.PDF .LP .I "The Type 2 Charstring Format," also available from Adobe as a PDF file, describes the newer Type 2 operators, which are also used in some multiple-master Type 1 fonts like Adobe Jenson and Kepler: http://partners.adobe.com/asn/developer/PDFS/TN/5177.Type2.pdf ' .SH AUTHORS Lee Hetherington (ilh@lcs.mit.edu) .br Eddie Kohler (ekohler@gmail.com) t1utils-1.37/Makefile.in0000644000076400007640000006552611602730462012066 00000000000000# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, # Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = t1ascii$(EXEEXT) t1binary$(EXEEXT) t1asm$(EXEEXT) \ t1disasm$(EXEEXT) t1unmac$(EXEEXT) t1mac$(EXEEXT) subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(top_srcdir)/configure INSTALL NEWS config.guess config.sub \ depcomp install-sh missing strerror.c ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" PROGRAMS = $(bin_PROGRAMS) am_t1ascii_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1ascii.$(OBJEXT) t1ascii_OBJECTS = $(am_t1ascii_OBJECTS) t1ascii_LDADD = $(LDADD) t1ascii_DEPENDENCIES = @LIBOBJS@ am_t1asm_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1asm.$(OBJEXT) t1asm_OBJECTS = $(am_t1asm_OBJECTS) t1asm_LDADD = $(LDADD) t1asm_DEPENDENCIES = @LIBOBJS@ am_t1binary_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1binary.$(OBJEXT) t1binary_OBJECTS = $(am_t1binary_OBJECTS) t1binary_LDADD = $(LDADD) t1binary_DEPENDENCIES = @LIBOBJS@ am_t1disasm_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1disasm.$(OBJEXT) t1disasm_OBJECTS = $(am_t1disasm_OBJECTS) t1disasm_LDADD = $(LDADD) t1disasm_DEPENDENCIES = @LIBOBJS@ am_t1mac_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1mac.$(OBJEXT) t1mac_OBJECTS = $(am_t1mac_OBJECTS) t1mac_LDADD = $(LDADD) t1mac_DEPENDENCIES = @LIBOBJS@ am_t1unmac_OBJECTS = clp.$(OBJEXT) t1lib.$(OBJEXT) t1unmac.$(OBJEXT) t1unmac_OBJECTS = $(am_t1unmac_OBJECTS) t1unmac_LDADD = $(LDADD) t1unmac_DEPENDENCIES = @LIBOBJS@ DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(t1ascii_SOURCES) $(t1asm_SOURCES) $(t1binary_SOURCES) \ $(t1disasm_SOURCES) $(t1mac_SOURCES) $(t1unmac_SOURCES) DIST_SOURCES = $(t1ascii_SOURCES) $(t1asm_SOURCES) $(t1binary_SOURCES) \ $(t1disasm_SOURCES) $(t1mac_SOURCES) $(t1unmac_SOURCES) am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man_MANS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d "$(distdir)" \ || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr "$(distdir)"; }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = foreign check-news man_MANS = t1ascii.1 t1binary.1 t1asm.1 t1disasm.1 t1unmac.1 t1mac.1 t1ascii_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1ascii.c t1binary_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1binary.c t1asm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1asm.c t1disasm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1disasm.c t1unmac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1unmac.c t1mac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1mac.c AM_CPPFLAGS = -I$(top_srcdir)/include LDADD = @LIBOBJS@ EXTRA_DIST = $(man_MANS) t1utils.spec all: config.h $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .c .o .obj am--refresh: @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f stamp-h1 touch $@ distclean-hdr: -rm -f config.h stamp-h1 install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ while read p p1; do if test -f $$p; \ then echo "$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) t1ascii$(EXEEXT): $(t1ascii_OBJECTS) $(t1ascii_DEPENDENCIES) @rm -f t1ascii$(EXEEXT) $(LINK) $(t1ascii_OBJECTS) $(t1ascii_LDADD) $(LIBS) t1asm$(EXEEXT): $(t1asm_OBJECTS) $(t1asm_DEPENDENCIES) @rm -f t1asm$(EXEEXT) $(LINK) $(t1asm_OBJECTS) $(t1asm_LDADD) $(LIBS) t1binary$(EXEEXT): $(t1binary_OBJECTS) $(t1binary_DEPENDENCIES) @rm -f t1binary$(EXEEXT) $(LINK) $(t1binary_OBJECTS) $(t1binary_LDADD) $(LIBS) t1disasm$(EXEEXT): $(t1disasm_OBJECTS) $(t1disasm_DEPENDENCIES) @rm -f t1disasm$(EXEEXT) $(LINK) $(t1disasm_OBJECTS) $(t1disasm_LDADD) $(LIBS) t1mac$(EXEEXT): $(t1mac_OBJECTS) $(t1mac_DEPENDENCIES) @rm -f t1mac$(EXEEXT) $(LINK) $(t1mac_OBJECTS) $(t1mac_LDADD) $(LIBS) t1unmac$(EXEEXT): $(t1unmac_OBJECTS) $(t1unmac_DEPENDENCIES) @rm -f t1unmac$(EXEEXT) $(LINK) $(t1unmac_OBJECTS) $(t1unmac_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strerror.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1ascii.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1asm.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1binary.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1disasm.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1lib.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1mac.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t1unmac.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` install-man1: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list=''; test -n "$(man1dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ test -z "$$files" || { \ echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(man1dir)" && rm -f $$files; } ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @case `sed 15q $(srcdir)/NEWS` in \ *"$(VERSION)"*) : ;; \ *) \ echo "NEWS not updated; not releasing" 1>&2; \ exit 1;; \ esac @list='$(MANS)'; if test -n "$$list"; then \ list=`for p in $$list; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ if test -n "$$list" && \ grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ echo " typically \`make maintainer-clean' will remove them" >&2; \ exit 1; \ else :; fi; \ else :; fi $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @$(am__cd) '$(distuninstallcheck_dir)' \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) $(MANS) config.h installdirs: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-binPROGRAMS clean-generic mostlyclean-am distclean: distclean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(DEPDIR) ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-hdr distclean-tags dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-binPROGRAMS install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf $(DEPDIR) ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-man uninstall-man: uninstall-man1 .MAKE: all install-am install-strip .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \ clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \ dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ distcheck distclean distclean-compile distclean-generic \ distclean-hdr distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-binPROGRAMS install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-man1 install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-binPROGRAMS uninstall-man \ uninstall-man1 versionize: perl -pi -e "s/^\\.ds V.*/.ds V $(VERSION)/;" t1ascii.1 t1binary.1 t1disasm.1 t1asm.1 t1unmac.1 t1mac.1 perl -pi -e 's/^Version:(\s*).*/Version:$${1}$(VERSION)/; s/$(PACKAGE)-[\w.]+\.tar\.gz/$(PACKAGE)-$(VERSION).tar.gz/;' t1utils.spec perl -pi -e 's/VERSION [\d.ab]+/VERSION $(VERSION)/;' README rpm: dist buildarch=`rpm --showrc | awk '/^build arch/ { print $$4; }'` ; \ mkdir -p /tmp/rpm-t1u/SOURCES /tmp/rpm-t1u/RPMS/$$buildarch \ /tmp/rpm-t1u/BUILD ; \ echo 'include: /usr/lib/rpm/rpmrc' > /tmp/rpm-t1u/rc ; \ echo 'macrofiles: /usr/lib/rpm/macros:/tmp/rpm-t1u/macros' >> /tmp/rpm-t1u/rc ; \ echo '%_topdir /tmp/rpm-t1u' > /tmp/rpm-t1u/macros ; \ cp $(PACKAGE)-$(VERSION).tar.gz /tmp/rpm-t1u/SOURCES ; \ rpmbuild --rcfile /tmp/rpm-t1u/rc -bb t1utils.spec ; \ cp /tmp/rpm-t1u/RPMS/$$buildarch/*.rpm . rm -rf /tmp/rpm-t1u .PHONY: srclinks versionize rpm # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: t1utils-1.37/Makefile.am0000644000076400007640000000336511546355024012052 00000000000000## Process this file with automake to produce Makefile.in AUTOMAKE_OPTIONS = foreign check-news bin_PROGRAMS = t1ascii t1binary t1asm t1disasm t1unmac t1mac man_MANS = t1ascii.1 t1binary.1 t1asm.1 t1disasm.1 t1unmac.1 t1mac.1 t1ascii_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1ascii.c t1binary_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1binary.c t1asm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1asm.c t1disasm_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1disasm.c t1unmac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1unmac.c t1mac_SOURCES = include/lcdf/clp.h include/lcdf/inttypes.h \ clp.c t1lib.h t1lib.c t1mac.c AM_CPPFLAGS = -I$(top_srcdir)/include LDADD = @LIBOBJS@ EXTRA_DIST = $(man_MANS) t1utils.spec versionize: perl -pi -e "s/^\\.ds V.*/.ds V $(VERSION)/;" t1ascii.1 t1binary.1 t1disasm.1 t1asm.1 t1unmac.1 t1mac.1 perl -pi -e 's/^Version:(\s*).*/Version:$${1}$(VERSION)/; s/$(PACKAGE)-[\w.]+\.tar\.gz/$(PACKAGE)-$(VERSION).tar.gz/;' t1utils.spec perl -pi -e 's/VERSION [\d.ab]+/VERSION $(VERSION)/;' README rpm: dist buildarch=`rpm --showrc | awk '/^build arch/ { print $$4; }'` ; \ mkdir -p /tmp/rpm-t1u/SOURCES /tmp/rpm-t1u/RPMS/$$buildarch \ /tmp/rpm-t1u/BUILD ; \ echo 'include: /usr/lib/rpm/rpmrc' > /tmp/rpm-t1u/rc ; \ echo 'macrofiles: /usr/lib/rpm/macros:/tmp/rpm-t1u/macros' >> /tmp/rpm-t1u/rc ; \ echo '%_topdir /tmp/rpm-t1u' > /tmp/rpm-t1u/macros ; \ cp $(PACKAGE)-$(VERSION).tar.gz /tmp/rpm-t1u/SOURCES ; \ rpmbuild --rcfile /tmp/rpm-t1u/rc -bb t1utils.spec ; \ cp /tmp/rpm-t1u/RPMS/$$buildarch/*.rpm . rm -rf /tmp/rpm-t1u .PHONY: srclinks versionize rpm t1utils-1.37/aclocal.m40000644000076400007640000010766311602730462011660 00000000000000# generated automatically by aclocal 1.11.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],, [m4_warning([this file was generated for autoconf 2.64. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.11.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 10 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi am__universal=false m4_case([$1], [CC], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac], [CXX], [case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac]) for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 5 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 16 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AC_REQUIRE([AM_PROG_INSTALL_SH])dnl AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl dnl The `parallel-tests' driver may need to know about EXEEXT, so add the dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. AC_CONFIG_COMMANDS_PRE(dnl [m4_provide_if([_AM_COMPILER_EXEEXT], [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further dnl mangled by Autoconf and run in a shell conditional statement. m4_define([_AC_COMPILER_EXEEXT], m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering # Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_MAINTAINER_MODE([DEFAULT-MODE]) # ---------------------------------- # Control maintainer-specific portions of Makefiles. # Default is to disable them, unless `enable' is passed literally. # For symmetry, `disable' may be passed as well. Anyway, the user # can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], [m4_case(m4_default([$1], [disable]), [enable], [m4_define([am_maintainer_other], [disable])], [disable], [m4_define([am_maintainer_other], [enable])], [m4_define([am_maintainer_other], [enable]) m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles]) dnl maintainer-mode's default is 'disable' unless 'enable' is passed AC_ARG_ENABLE([maintainer-mode], [ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful (and sometimes confusing) to the casual installer], [USE_MAINTAINER_MODE=$enableval], [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST([MAINT])dnl ] ) AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 6 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[[\\\"\#\$\&\'\`$am_lf]]*) AC_MSG_ERROR([unsafe absolute working directory name]);; esac case $srcdir in *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Public sister of _AM_SUBST_NOTMAKE. AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR t1utils-1.37/t1ascii.10000644000076400007640000000235111602730475011427 00000000000000.ds V 1.37 .de M .BR "\\$1" "(\\$2)\\$3" .. .TH T1ASCII 1 "" "Version \*V" .SH NAME t1ascii \- convert PostScript Type 1 font from binary to ASCII .SH SYNOPSIS .B t1ascii \%[\fB\-l\fR \fIlength\fR] \%[\fIinput\fR [\fIoutput\fR]] .SH DESCRIPTION .BR t1ascii converts Adobe Type 1 font programs in PFB (binary) format to PFA (hexadecimal) format. If the file .I output is not specified output goes to the standard output. If the file .I input is not specified input comes from the standard input. ' .SH OPTIONS .TP 5 .BI \-\-line\-length= "num\fR, " \-l " num" Set the maximum length of encrypted lines in the output to .I num. (These are the lines consisting wholly of hexadecimal digits.) The default is 64. ' .TP 5 .BR \-\-warnings ", " \-w Warn when the input font contains lines longer than 255 characters. Long lines don't strictly conform to Adobe's Document Structuring Conventions, and may cause problems with older software. ' .SH "SEE ALSO" .LP .M t1binary 1 , .M t1unmac 1 , .M t1mac 1 , .M t1asm 1 , .M t1disasm 1 .LP .I "Adobe Type 1 Font Format" .SH AUTHORS Lee Hetherington (ilh@lcs.mit.edu) .br Eddie Kohler (ekohler@gmail.com) .PP Ported to Microsoft C/C++ Compiler and MS-DOS operating system by Kai-Uwe Herbing (herbing@netmbx.netmbx.de). t1utils-1.37/config.guess0000755000076400007640000012753411163207451012336 00000000000000#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. timestamp='2008-01-23' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ; set_cc_for_build= ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} exit ;; *:ekkoBSD:*:*) echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} exit ;; *:SolidBSD:*:*) echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} exit ;; macppc:MirBSD:*:*) echo powerpc-unknown-mirbsd${UNAME_RELEASE} exit ;; *:MirBSD:*:*) echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ;; *5.*) UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ;; esac # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition exit ;; *:z/VM:*:*) echo s390-ibm-zvmoe exit ;; *:OS400:*:*) echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit ;; arm:riscos:*:*|arm:RISCOS:*:*) echo arm-unknown-riscos exit ;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit ;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit ;; DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7; exit ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit ;; m68k:machten:*:*) echo m68k-apple-machten${UNAME_RELEASE} exit ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && SYSTEM_NAME=`$dummy $dummyarg` && { echo "$SYSTEM_NAME"; exit; } echo mips-mips-riscos${UNAME_RELEASE} exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` then echo "$SYSTEM_NAME" else echo rs6000-ibm-aix3.2.5 fi elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit ;; *:AIX:*:[456]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then eval $set_cc_for_build # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler # generating 64-bit code. GNU and HP use different nomenclature: # # $ CC_FOR_BUILD=cc ./config.guess # => hppa2.0w-hp-hpux11.23 # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit ;; *:FreeBSD:*:*) case ${UNAME_MACHINE} in pc98) echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; amd64) echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; *) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; esac exit ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit ;; *:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit ;; i*:windows32*:*) # uname -m includes "-pc" on this system. echo ${UNAME_MACHINE}-mingw32 exit ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; *:Interix*:[3456]*) case ${UNAME_MACHINE} in x86) echo i586-pc-interix${UNAME_RELEASE} exit ;; EM64T | authenticamd) echo x86_64-unknown-interix${UNAME_RELEASE} exit ;; IA64) echo ia64-unknown-interix${UNAME_RELEASE} exit ;; esac ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit ;; *:GNU:*:*) # the GNU system echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu exit ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit ;; arm*:Linux:*:*) eval $set_cc_for_build if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then echo ${UNAME_MACHINE}-unknown-linux-gnu else echo ${UNAME_MACHINE}-unknown-linux-gnueabi fi exit ;; avr32*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit ;; crisv32:Linux:*:*) echo crisv32-axis-linux-gnu exit ;; frv:Linux:*:*) echo frv-unknown-linux-gnu exit ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m32r*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips64 #undef mips64el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mips64el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips64 #else CPU= #endif #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^CPU/{ s: ::g p }'`" test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; or32:Linux:*:*) echo or32-unknown-linux-gnu exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; vax:Linux:*:*) echo ${UNAME_MACHINE}-dec-linux-gnu exit ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit ;; xtensa*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) LIBC=gnu #else LIBC=gnuaout #endif #endif #ifdef __dietlibc__ LIBC=dietlibc #endif EOF eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' /^LIBC/{ s: ::g p }'`" test x"${LIBC}" != x && { echo "${UNAME_MACHINE}-pc-linux-${LIBC}" exit } test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit ;; i*86:syllable:*:*) echo ${UNAME_MACHINE}-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit ;; i*86:*:5:[678]*) # UnixWare 7.x, OpenUNIX and OpenServer 6. case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit ;; paragon:*:*:*) echo i860-intel-osf1 exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit ;; M68*:*:R3V[5678]*:*) test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. echo ${UNAME_MACHINE}-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit ;; SX-7:SUPER-UX:*:*) echo sx7-nec-superux${UNAME_RELEASE} exit ;; SX-8:SUPER-UX:*:*) echo sx8-nec-superux${UNAME_RELEASE} exit ;; SX-8R:SUPER-UX:*:*) echo sx8r-nec-superux${UNAME_RELEASE} exit ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; NSE-?:NONSTOP_KERNEL:*:*) echo nse-tandem-nsk${UNAME_RELEASE} exit ;; NSR-?:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit ;; *:ITS:*:*) echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit ;; *:DragonFly:*:*) echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` case "${UNAME_MACHINE}" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; esac ;; *:XENIX:*:SysV) echo i386-pc-xenix exit ;; i*86:skyos:*:*) echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' exit ;; i*86:rdos:*:*) echo ${UNAME_MACHINE}-pc-rdos exit ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix\n"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && { echo "$SYSTEM_NAME"; exit; } # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit ;; c34*) echo c34-convex-bsd exit ;; c38*) echo c38-convex-bsd exit ;; c4*) echo c4-convex-bsd exit ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: t1utils-1.37/t1lib.h0000644000076400007640000000237111116622040011162 00000000000000#ifndef T1LIB_H #define T1LIB_H #ifdef __cplusplus extern "C" { #endif #ifdef WIN32 # pragma warning (disable: 4007 4096) # define CDECL __cdecl #else # define CDECL #endif #define PFB_MARKER 128 #define PFB_ASCII 1 #define PFB_BINARY 2 #define PFB_DONE 3 struct font_reader { void (*output_ascii)(char *, int); void (*output_binary)(unsigned char *, int); void (*output_end)(); }; void process_pfa(FILE *, const char *filename, struct font_reader *); void process_pfb(FILE *, const char *filename, struct font_reader *); struct pfb_writer { unsigned char *buf; unsigned len; unsigned max_len; unsigned pos; int blocktyp; int binary_blocks_written; FILE *f; }; void init_pfb_writer(struct pfb_writer *, int, FILE *); void pfb_writer_output_block(struct pfb_writer *); void pfb_writer_grow_buf(struct pfb_writer *); void pfb_writer_end(struct pfb_writer *); #define PFB_OUTPUT_BYTE(w, b) do { \ if ((w)->pos >= (w)->len) pfb_writer_grow_buf(w); \ (w)->buf[(w)->pos++] = (b); \ } while (0) int crcbuf(int crc, unsigned int len, const char *buf); /* whoever uses this code must provide a definition for these functions */ extern void error(const char *, ...); extern void fatal_error(const char *, ...); #ifdef __cplusplus } #endif #endif t1utils-1.37/t1lib.c0000644000076400007640000002745011116622040011162 00000000000000/* t1lib * * This file contains functions for reading PFA and PFB files. * * (C) 1999-2008 Eddie Kohler , after code by * I. Lee Hetherington . All rights reserved. * * Permission is hereby granted to use, modify, and distribute this program * for any purpose provided this copyright notice remains intact. * */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include #include "t1lib.h" #ifdef __cplusplus extern "C" { #endif #define PFA_ASCII 1 #define PFA_EEXEC_TEST 2 #define PFA_HEX 3 #define PFA_BINARY 4 /* This function returns the value (0-15) of a single hex digit. It returns 0 for an invalid hex digit. */ static int hexval(char c) { if (c >= 'A' && c <= 'F') return c - 'A' + 10; else if (c >= 'a' && c <= 'f') return c - 'a' + 10; else if (c >= '0' && c <= '9') return c - '0'; else return 0; } /* This function translates a string of hexadecimal digits into binary data. We allow an odd number of digits. Returns length of binary data. */ static int translate_hex_string(char *s, char *saved_orphan) { int c1 = *saved_orphan; char *start = s; char *t = s; for (; *s; s++) { if (isspace(*s)) continue; if (c1) { *t++ = (hexval(c1) << 4) + hexval(*s); c1 = 0; } else c1 = *s; } *saved_orphan = c1; return t - start; } /* This function returns 1 if the string contains all '0's. */ static int all_zeroes(char *s) { if (*s == '\0' || *s == '\n') return 0; while (*s == '0') s++; return *s == '\0' || *s == '\n'; } /* This function handles the entire file. */ #define LINESIZE 1024 void process_pfa(FILE *ifp, const char *ifp_filename, struct font_reader *fr) { /* Loop until no more input. We need to look for `currentfile eexec' to start eexec section (hex to binary conversion) and line of all zeros to switch back to ASCII. */ /* Don't use fgets() in case line-endings are indicated by bare \r's, as occurs in Macintosh fonts. */ /* 2.Aug.1999 - At the behest of Tom Kacvinsky , support binary PFA fonts. */ char buffer[LINESIZE]; int c = 0; int blocktyp = PFA_ASCII; char saved_orphan = 0; (void)ifp_filename; while (c != EOF) { char *line = buffer, *last = buffer; int crlf = 0; c = getc(ifp); while (c != EOF && c != '\r' && c != '\n' && last < buffer + LINESIZE - 1) { *last++ = c; c = getc(ifp); } /* handle the end of the line */ if (last == buffer + LINESIZE - 1) /* buffer overrun: don't append newline even if we have it */ ungetc(c, ifp); else if (c == '\r' && blocktyp != PFA_BINARY) { /* change CR or CR/LF into LF, unless reading binary data! (This condition was wrong before, caused Thanh problems - 6.Mar.2001) */ c = getc(ifp); if (c != '\n') ungetc(c, ifp), crlf = 1; else crlf = 2; *last++ = '\n'; } else if (c != EOF) *last++ = c; *last = 0; /* now that we have the line, handle it */ if (blocktyp == PFA_ASCII) { if (strncmp(line, "currentfile eexec", 17) == 0 && isspace(line[17])) { char saved_p; /* assert(line == buffer); */ for (line += 18; isspace(*line); line++) /* nada */; saved_p = *line; *line = 0; fr->output_ascii(buffer, line - buffer); *line = saved_p; blocktyp = PFA_EEXEC_TEST; if (!*line) continue; } else { fr->output_ascii(line, last - line); continue; } } /* check immediately after "currentfile eexec" for ASCII or binary */ if (blocktyp == PFA_EEXEC_TEST) { /* 8.Feb.2004: fix bug if first character in a binary eexec block is 0, reported by Werner Lemberg */ for (; line < last && isspace(*line); line++) /* nada */; if (line == last) continue; else if (last >= line + 4 && isxdigit(line[0]) && isxdigit(line[1]) && isxdigit(line[2]) && isxdigit(line[3])) blocktyp = PFA_HEX; else blocktyp = PFA_BINARY; memmove(buffer, line, last - line + 1); last = buffer + (last - line); line = buffer; /* patch up crlf fix */ if (blocktyp == PFA_BINARY && crlf) { last[-1] = '\r'; if (crlf == 2) *last++ = '\n'; } } /* blocktyp == PFA_HEX || blocktyp == PFA_BINARY */ if (all_zeroes(line)) { /* XXX not safe */ fr->output_ascii(line, last - line); blocktyp = PFA_ASCII; } else if (blocktyp == PFA_HEX) { int len = translate_hex_string(line, &saved_orphan); if (len) fr->output_binary((unsigned char *)line, len); } else fr->output_binary((unsigned char *)line, last - line); } fr->output_end(); } /* Process a PFB file. */ /* XXX Doesn't handle "currentfile eexec" as intelligently as process_pfa does. */ static int handle_pfb_ascii(struct font_reader *fr, char *line, int len) { /* Divide PFB_ASCII blocks into lines */ int start = 0; while (1) { int pos = start; while (pos < len && line[pos] != '\n' && line[pos] != '\r') pos++; if (pos >= len) { if (pos == start) return 0; else if (start == 0 && pos == LINESIZE - 1) { line[pos] = 0; fr->output_ascii(line, pos); return 0; } else { memmove(line, line + start, pos - start); return pos - start; } } else if (pos < len - 1 && line[pos] == '\r' && line[pos+1] == '\n') { line[pos] = '\n'; line[pos+1] = 0; fr->output_ascii(line + start, pos + 1 - start); start = pos + 2; } else { char save = line[pos+1]; line[pos] = '\n'; line[pos+1] = 0; fr->output_ascii(line + start, pos + 1 - start); line[pos+1] = save; start = pos + 1; } } } void process_pfb(FILE *ifp, const char *ifp_filename, struct font_reader *fr) { int blocktyp = 0; int block_len = 0; int c = 0; int filepos = 0; int linepos = 0; char line[LINESIZE]; while (1) { while (block_len == 0) { c = getc(ifp); blocktyp = getc(ifp); if (c != PFB_MARKER || (blocktyp != PFB_ASCII && blocktyp != PFB_BINARY && blocktyp != PFB_DONE)) { if (c == EOF || blocktyp == EOF) error("%s corrupted: no end-of-file marker", ifp_filename); else error("%s corrupted: bad block marker at position %d", ifp_filename, filepos); blocktyp = PFB_DONE; } if (blocktyp == PFB_DONE) goto done; block_len = getc(ifp) & 0xFF; block_len |= (getc(ifp) & 0xFF) << 8; block_len |= (getc(ifp) & 0xFF) << 16; block_len |= (getc(ifp) & 0xFF) << 24; if (feof(ifp)) { error("%s corrupted: bad block length at position %d", ifp_filename, filepos); blocktyp = PFB_DONE; goto done; } filepos += 6; } /* read the block in its entirety, in LINESIZE chunks */ while (block_len > 0) { int rest = LINESIZE - 1 - linepos; /* leave space for '\0' */ int n = (block_len > rest ? rest : block_len); int actual = fread(line + linepos, 1, n, ifp); if (actual != n) { error("%s corrupted: block short by %d bytes at position %d", ifp_filename, block_len - actual, filepos); block_len = actual; } if (blocktyp == PFB_BINARY) fr->output_binary((unsigned char *)line, actual); else linepos = handle_pfb_ascii(fr, line, linepos + actual); block_len -= actual; filepos += actual; } /* handle any leftover line */ if (linepos > 0) { line[linepos] = 0; fr->output_ascii(line, linepos); linepos = 0; } } done: c = getc(ifp); if (c != EOF) error("%s corrupted: data after PFB end marker at position %d", ifp_filename, filepos - 2); fr->output_end(); } #define DEFAULT_BLOCKLEN (1L<<12) void init_pfb_writer(struct pfb_writer *w, int blocklen, FILE *f) { w->len = DEFAULT_BLOCKLEN; w->buf = (unsigned char *)malloc(w->len); if (!w->buf) fatal_error("out of memory"); w->max_len = (blocklen <= 0 ? 0xFFFFFFFFU : (unsigned)blocklen); w->pos = 0; w->blocktyp = PFB_ASCII; w->binary_blocks_written = 0; w->f = f; } void pfb_writer_output_block(struct pfb_writer *w) { /* do nothing if nothing in block */ if (w->pos == 0) return; /* output four-byte block length */ putc(PFB_MARKER, w->f); putc(w->blocktyp, w->f); putc((int)(w->pos & 0xff), w->f); putc((int)((w->pos >> 8) & 0xff), w->f); putc((int)((w->pos >> 16) & 0xff), w->f); putc((int)((w->pos >> 24) & 0xff), w->f); /* output block data */ fwrite(w->buf, 1, w->pos, w->f); /* mark block buffer empty and uninitialized */ w->pos = 0; if (w->blocktyp == PFB_BINARY) w->binary_blocks_written++; } void pfb_writer_grow_buf(struct pfb_writer *w) { if (w->len < w->max_len) { /* grow w->buf */ unsigned new_len = w->len * 2; unsigned char *new_buf; if (new_len > w->max_len) new_len = w->max_len; new_buf = (unsigned char *)malloc(new_len); if (!new_buf) { error("out of memory; continuing with a smaller block size"); w->max_len = w->len; pfb_writer_output_block(w); } else { memcpy(new_buf, w->buf, w->len); free(w->buf); w->buf = new_buf; w->len = new_len; } } else /* buf already the right size, just output the block */ pfb_writer_output_block(w); } void pfb_writer_end(struct pfb_writer *w) { if (w->pos) pfb_writer_output_block(w); putc(PFB_MARKER, w->f); putc(PFB_DONE, w->f); } /* This CRC table and routine were borrowed from macutils-2.0b3 */ static unsigned short crctab[256] = { 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7, 0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF, 0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6, 0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE, 0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485, 0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D, 0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4, 0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC, 0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823, 0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B, 0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12, 0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A, 0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41, 0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49, 0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70, 0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78, 0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F, 0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067, 0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E, 0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256, 0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D, 0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, 0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C, 0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634, 0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB, 0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3, 0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A, 0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92, 0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9, 0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1, 0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8, 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0, }; /* * Update a CRC check on the given buffer. */ int crcbuf(int crc, unsigned int len, const char *buf) { const unsigned char *ubuf = (const unsigned char *)buf; while (len--) crc = ((crc << 8) & 0xFF00) ^ crctab[((crc >> 8) & 0xFF) ^ *ubuf++]; return crc; } #ifdef __cplusplus } #endif t1utils-1.37/clp.c0000644000076400007640000020465411546355024010744 00000000000000/* -*- related-file-name: "../include/lcdf/clp.h" -*- */ /* clp.c - Complete source code for CLP. * This file is part of CLP, the command line parser package. * * Copyright (c) 1997-2011 Eddie Kohler, ekohler@gmail.com * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, subject to the conditions * listed in the Click LICENSE file, which is available in full at * http://www.pdos.lcs.mit.edu/click/license.html. The conditions include: you * must preserve this copyright notice, and you cannot mention the copyright * holders in advertising related to the Software without their permission. * The Software is provided WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED. This * notice is a summary of the Click LICENSE file; the license in that file is * legally binding. */ #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include #include #include #include /* By default, assume we have strtoul. */ #if !defined(HAVE_STRTOUL) && !defined(HAVE_CONFIG_H) # define HAVE_STRTOUL 1 #endif #ifdef __cplusplus extern "C" { #endif /** @file clp.h * @brief Functions for parsing command line options. * * The CLP functions are used to parse command line arugments into options. * It automatically handles value parsing, error messages, long options with * minimum prefix matching, short options, and negated options. * * The CLP model works like this. * *
    *
  1. The user declares an array of Clp_Option structures that define the * options their program accepts.
    2. *
  2. The user creates a Clp_Parser object using Clp_NewParser(), passing in * the command line arguments to parse and the Clp_Option structures.
    3. *
  3. A loop repeatedly calls Clp_Next() to parse the arguments.
    4. *
* * Unlike many command line parsing libraries, CLP steps through all arguments * one at a time, rather than slurping up all options at once. This makes it * meaningful to give an option more than once. * * Here's an example. * * @code * #define ANIMAL_OPT 1 * #define VEGETABLE_OPT 2 * #define MINERALS_OPT 3 * #define USAGE_OPT 4 * * static const Clp_Option options[] = { * { "animal", 'a', ANIMAL_OPT, Clp_ValString, 0 }, * { "vegetable", 'v', VEGETABLE_OPT, Clp_ValString, Clp_Negate | Clp_Optional }, * { "minerals", 'm', MINERALS_OPT, Clp_ValInt, 0 }, * { "usage", 0, USAGE_OPT, 0, 0 } * }; * * int main(int argc, char *argv[]) { * Clp_Parser *clp = Clp_NewParser(argc, argv, * sizeof(options) / sizeof(options[0]), options); * int opt; * while ((opt = Clp_Next(clp)) != Clp_Done) * switch (opt) { * case ANIMAL_OPT: * fprintf(stderr, "animal is %s\n", clp->val.s); * break; * case VEGETABLE_OPT: * if (clp->negated) * fprintf(stderr, "no vegetables!\n"); * else if (clp->have_val) * fprintf(stderr, "vegetable is %s\n", clp->val.s); * else * fprintf(stderr, "vegetables OK\n"); * break; * case MINERALS_OPT: * fprintf(stderr, "%d minerals\n", clp->val.i); * break; * case USAGE_OPT: * fprintf(stderr, "Usage: 20q [--animal=ANIMAL] [--vegetable[=VEGETABLE]] [--minerals=N]\n"); * break; * case Clp_NotOption: * fprintf(stderr, "non-option %s\n", clp->vstr); * break; * } * } * } * @endcode * * Here are a couple of executions. * * 
 * % ./20q --animal=cat
 * animal is cat
 * % ./20q --animal=cat -a dog -afish --animal bird --an=snake
 * animal is cat
 * animal is dog
 * animal is fish
 * animal is bird
 * animal is snake
 * % ./20q --no-vegetables
 * no vegetables!
 * % ./20q -v
 * vegetables OK
 * % ./20q -vkale
 * vegetable is kale
 * % ./20q -m10
 * 10 minerals
 * % ./20q -m foo
 * '-m' expects an integer, not 'foo'
 *
*/ /* Option types for Clp_SetOptionChar */ #define Clp_DoubledLong (Clp_LongImplicit * 2) #define Clp_InitialValType 8 #define MAX_AMBIGUOUS_VALUES 4 typedef struct { int val_type; Clp_ValParseFunc func; int flags; void *user_data; } Clp_ValType; typedef struct { unsigned ilong : 1; unsigned ishort : 1; unsigned imandatory : 1; unsigned ioptional : 1; unsigned ipos : 1; unsigned ineg : 1; unsigned iprefmatch : 1; unsigned lmmpos_short : 1; unsigned lmmneg_short : 1; unsigned char ilongoff; int lmmpos; int lmmneg; } Clp_InternOption; #define Clp_OptionCharsSize 5 typedef struct { int c; int type; } Clp_Oclass; #define Clp_OclassSize 10 typedef struct Clp_Internal { const Clp_Option *opt; Clp_InternOption *iopt; int nopt; unsigned opt_generation; Clp_ValType *valtype; int nvaltype; const char * const *argv; int argc; Clp_Oclass oclass[Clp_OclassSize]; int noclass; int long1pos; int long1neg; int utf8; char option_chars[Clp_OptionCharsSize]; const char *xtext; const char *program_name; void (*error_handler)(Clp_Parser *, const char *); int option_processing; int current_option; unsigned char is_short; unsigned char whole_negated; /* true if negated by an option character */ unsigned char could_be_short; unsigned char current_short; unsigned char negated_by_no; int ambiguous; int ambiguous_values[MAX_AMBIGUOUS_VALUES]; } Clp_Internal; struct Clp_ParserState { const char * const *argv; int argc; char option_chars[Clp_OptionCharsSize]; const char *xtext; int option_processing; unsigned opt_generation; int current_option; unsigned char is_short; unsigned char whole_negated; unsigned char current_short; unsigned char negated_by_no; }; typedef struct Clp_StringList { Clp_Option *items; Clp_InternOption *iopt; int nitems; int allow_int; int nitems_invalid_report; } Clp_StringList; static int parse_string(Clp_Parser *, const char *, int, void *); static int parse_int(Clp_Parser *, const char *, int, void *); static int parse_bool(Clp_Parser *, const char *, int, void *); static int parse_double(Clp_Parser *, const char *, int, void *); static int parse_string_list(Clp_Parser *, const char *, int, void *); static int ambiguity_error(Clp_Parser *, int, int *, const Clp_Option *, const Clp_InternOption *, const char *, const char *, ...); /******* * utf8 **/ #define U_REPLACEMENT 0xFFFD static char * encode_utf8(char *s, int n, int c) { if (c < 0 || c >= 0x110000 || (c >= 0xD800 && c <= 0xDFFF)) c = U_REPLACEMENT; if (c <= 0x7F && n >= 1) *s++ = c; else if (c <= 0x7FF && n >= 2) { *s++ = 0xC0 | (c >> 6); goto char1; } else if (c <= 0xFFFF && n >= 3) { *s++ = 0xE0 | (c >> 12); goto char2; } else if (n >= 4) { *s++ = 0xF0 | (c >> 18); *s++ = 0x80 | ((c >> 12) & 0x3F); char2: *s++ = 0x80 | ((c >> 6) & 0x3F); char1: *s++ = 0x80 | (c & 0x3F); } return s; } static int decode_utf8(const char *s, const char **cp) { int c; if ((unsigned char) *s <= 0x7F) /* 1 byte: 0x000000-0x00007F */ c = *s++; else if ((unsigned char) *s <= 0xC1) /* bad/overlong encoding */ goto replacement; else if ((unsigned char) *s <= 0xDF) { /* 2 bytes: 0x000080-0x0007FF */ if ((s[1] & 0xC0) != 0x80) /* bad encoding */ goto replacement; c = (*s++ & 0x1F) << 6; goto char1; } else if ((unsigned char) *s <= 0xEF) { /* 3 bytes: 0x000800-0x00FFFF */ if ((s[1] & 0xC0) != 0x80 /* bad encoding */ || (s[2] & 0xC0) != 0x80 /* bad encoding */ || ((unsigned char) *s == 0xE0 /* overlong encoding */ && (s[1] & 0xE0) == 0x80) || ((unsigned char) *s == 0xED /* encoded surrogate */ && (s[1] & 0xE0) == 0xA0)) goto replacement; c = (*s++ & 0x0F) << 12; goto char2; } else if ((unsigned char) *s <= 0xF4) { /* 4 bytes: 0x010000-0x10FFFF */ if ((s[1] & 0xC0) != 0x80 /* bad encoding */ || (s[2] & 0xC0) != 0x80 /* bad encoding */ || (s[3] & 0xC0) != 0x80 /* bad encoding */ || ((unsigned char) *s == 0xF0 /* overlong encoding */ && (s[1] & 0xF0) == 0x80) || ((unsigned char) *s == 0xF4 /* encoded value > 0x10FFFF */ && (unsigned char) s[1] >= 0x90)) goto replacement; c = (*s++ & 0x07) << 18; c += (*s++ & 0x3F) << 12; char2: c += (*s++ & 0x3F) << 6; char1: c += (*s++ & 0x3F); } else { replacement: c = U_REPLACEMENT; for (s++; (*s & 0xC0) == 0x80; s++) /* nothing */; } if (cp) *cp = s; return c; } static int utf8_charlen(const char *s) { const char *sout; (void) decode_utf8(s, &sout); return sout - s; } static int clp_utf8_charlen(const Clp_Internal *cli, const char *s) { return (cli->utf8 ? utf8_charlen(s) : 1); } /******* * Clp_NewParser, etc. **/ static int min_different_chars(const char *s, const char *t) /* Returns the minimum number of bytes required to distinguish s from t. If s is shorter than t, returns strlen(s). */ { const char *sfirst = s; while (*s && *t && *s == *t) s++, t++; if (!*s) return s - sfirst; else return s - sfirst + 1; } static int long_as_short(const Clp_Internal *cli, const Clp_Option *o, Clp_InternOption *io, int failure) { if ((cli->long1pos || cli->long1neg) && io->ilong) { const char *name = o->long_name + io->ilongoff; if (cli->utf8) { int c = decode_utf8(name, &name); if (!*name && c && c != U_REPLACEMENT) return c; } else if (name[0] && !name[1]) return (unsigned char) name[0]; } return failure; } static void compare_options(Clp_Parser *clp, const Clp_Option *o1, Clp_InternOption *io1, const Clp_Option *o2, Clp_InternOption *io2) { Clp_Internal *cli = clp->internal; int short1, shortx1; /* ignore meaningless combinations */ if ((!io1->ishort && !io1->ilong) || (!io2->ishort && !io2->ilong) || !((io1->ipos && io2->ipos) || (io1->ineg && io2->ineg)) || o1->option_id == o2->option_id) return; /* look for duplication of short options */ short1 = (io1->ishort ? o1->short_name : -1); shortx1 = long_as_short(cli, o1, io1, -2); if (short1 >= 0 || shortx1 >= 0) { int short2 = (io2->ishort ? o2->short_name : -3); int shortx2 = long_as_short(cli, o2, io2, -4); if (short1 == short2) Clp_OptionError(clp, "CLP internal error: more than 1 option has short name %<%c%>", short1); else if ((short1 == shortx2 || shortx1 == short2 || shortx1 == shortx2) && ((io1->ipos && io2->ipos && cli->long1pos) || (io1->ineg && io2->ineg && cli->long1neg))) Clp_OptionError(clp, "CLP internal error: 1-char long name conflicts with short name %<%c%>", (short1 == shortx2 ? shortx2 : shortx1)); } /* analyze longest minimum match */ if (io1->ilong) { const char *name1 = o1->long_name + io1->ilongoff; /* long name's first character matches short name */ if (io2->ishort && !io1->iprefmatch) { int name1char = (cli->utf8 ? decode_utf8(name1, 0) : (unsigned char) *name1); if (name1char == o2->short_name) { if (io1->ipos && io2->ipos) io1->lmmpos_short = 1; if (io1->ineg && io2->ineg) io1->lmmneg_short = 1; } } /* match long name to long name */ if (io2->ilong) { const char *name2 = o2->long_name + io2->ilongoff; if (strcmp(name1, name2) == 0) Clp_OptionError(clp, "CLP internal error: duplicate long name %<%s%>", name1); if (io1->ipos && io2->ipos && !strncmp(name1, name2, io1->lmmpos) && (!io1->iprefmatch || strncmp(name1, name2, strlen(name1)))) io1->lmmpos = min_different_chars(name1, name2); if (io1->ineg && io2->ineg && !strncmp(name1, name2, io1->lmmneg) && (!io1->iprefmatch || strncmp(name1, name2, strlen(name1)))) io1->lmmneg = min_different_chars(name1, name2); } } } /** @param argc number of arguments * @param argv argument array * @param nopt number of option definitions * @param opt option definition array * @return the parser * * The new Clp_Parser that will parse the arguments in @a argv according to * the option definitions in @a opt. * * The Clp_Parser is created with the following characteristics: * *
    *
  • The "-" character introduces short options (Clp_SetOptionChar(clp, * '-', Clp_Short)).
    • *
  • Clp_ProgramName is set from the first argument in @a argv, if any. The * first argument returned by Clp_Next() will be the second argument in @a * argv. Note that this behavior differs from Clp_SetArguments.
    • *
  • UTF-8 support is on iff the LANG environment variable contains * one of the substrings "UTF-8", "UTF8", or "utf8". Override this with * Clp_SetUTF8().
    • *
  • The Clp_ValString, Clp_ValStringNotOption, Clp_ValInt, Clp_ValUnsigned, * Clp_ValBool, and Clp_ValDouble types are installed.
    • *
  • Errors are reported to standard error.
    • *
* * You may also create a Clp_Parser with no arguments or options * (Clp_NewParser(0, 0, 0, 0)) and set the arguments and options * later. * * Returns NULL if there isn't enough memory to construct the parser. * * @note The CLP library will not modify the contents of @a argv or @a opt. * The calling program must not modify @a opt. It may modify @a argv in * limited cases. */ Clp_Parser * Clp_NewParser(int argc, const char * const *argv, int nopt, const Clp_Option *opt) { Clp_Parser *clp = (Clp_Parser *)malloc(sizeof(Clp_Parser)); Clp_Internal *cli = (Clp_Internal *)malloc(sizeof(Clp_Internal)); Clp_InternOption *iopt = (Clp_InternOption *)malloc(sizeof(Clp_InternOption) * nopt); if (cli) cli->valtype = (Clp_ValType *)malloc(sizeof(Clp_ValType) * Clp_InitialValType); if (!clp || !cli || !iopt || !cli->valtype) goto failed; clp->negated = 0; clp->have_val = 0; clp->vstr = 0; clp->user_data = 0; clp->internal = cli; cli->opt = opt; cli->nopt = nopt; cli->iopt = iopt; cli->opt_generation = 0; cli->error_handler = 0; /* Assign program name (now so we can call Clp_OptionError) */ if (argc > 0) { const char *slash = strrchr(argv[0], '/'); cli->program_name = slash ? slash + 1 : argv[0]; } else cli->program_name = 0; /* Assign arguments, skipping program name */ Clp_SetArguments(clp, argc - 1, argv + 1); /* Initialize UTF-8 status and option classes */ { char *s = getenv("LANG"); cli->utf8 = (s && (strstr(s, "UTF-8") != 0 || strstr(s, "UTF8") != 0 || strstr(s, "utf8") != 0)); } cli->oclass[0].c = '-'; cli->oclass[0].type = Clp_Short; cli->noclass = 1; cli->long1pos = cli->long1neg = 0; /* Add default type parsers */ cli->nvaltype = 0; Clp_AddType(clp, Clp_ValString, 0, parse_string, 0); Clp_AddType(clp, Clp_ValStringNotOption, Clp_DisallowOptions, parse_string, 0); Clp_AddType(clp, Clp_ValInt, 0, parse_int, 0); Clp_AddType(clp, Clp_ValUnsigned, 0, parse_int, (void *)cli); Clp_AddType(clp, Clp_ValBool, 0, parse_bool, 0); Clp_AddType(clp, Clp_ValDouble, 0, parse_double, 0); /* Set options */ Clp_SetOptions(clp, nopt, opt); return clp; failed: if (cli && cli->valtype) free(cli->valtype); if (cli) free(cli); if (clp) free(clp); if (iopt) free(iopt); return 0; } /** @param clp the parser * * All memory associated with @a clp is freed. */ void Clp_DeleteParser(Clp_Parser *clp) { int i; Clp_Internal *cli; if (!clp) return; cli = clp->internal; /* get rid of any string list types */ for (i = 0; i < cli->nvaltype; i++) if (cli->valtype[i].func == parse_string_list) { Clp_StringList *clsl = (Clp_StringList *)cli->valtype[i].user_data; free(clsl->items); free(clsl->iopt); free(clsl); } free(cli->valtype); free(cli->iopt); free(cli); free(clp); } /** @param clp the parser * @param errh error handler function * @return previous error handler function * * The error handler function is called when CLP encounters an error while * parsing the command line. It is called with the arguments "(*errh)(@a * clp, s)", where s is a description of the error terminated by * a newline. The s descriptions produced by CLP itself are prefixed * by the program name, if any. */ Clp_ErrorHandler Clp_SetErrorHandler(Clp_Parser *clp, void (*errh)(Clp_Parser *, const char *)) { Clp_Internal *cli = clp->internal; Clp_ErrorHandler old = cli->error_handler; cli->error_handler = errh; return old; } /** @param clp the parser * @param utf8 does the parser support UTF-8? * @return previous UTF-8 mode * * In UTF-8 mode, all input strings (arguments and long names for options) are * assumed to be encoded via UTF-8, and all character names * (Clp_SetOptionChar() and short names for options) may cover the whole * Unicode range. Out of UTF-8 mode, all input strings are treated as binary, * and all character names must be unsigned char values. * * Furthermore, error messages in UTF-8 mode may contain Unicode quote * characters. */ int Clp_SetUTF8(Clp_Parser *clp, int utf8) { Clp_Internal *cli = clp->internal; int i, j, old_utf8 = cli->utf8; cli->utf8 = utf8; for (i = 0; i < cli->nopt; ++i) { cli->iopt[i].lmmpos = cli->iopt[i].lmmneg = 1; cli->iopt[i].lmmpos_short = cli->iopt[i].lmmneg_short = 0; for (j = 0; j < cli->nopt; ++j) compare_options(clp, &cli->opt[i], &cli->iopt[i], &cli->opt[j], &cli->iopt[j]); } return old_utf8; } /** @param clp the parser * @param c character * @return option character treatment * * Returns an integer specifying how CLP treats arguments that begin * with character @a c. See Clp_SetOptionChar for possibilities. */ int Clp_OptionChar(Clp_Parser *clp, int c) { Clp_Internal *cli = clp->internal; int i, oclass = 0; if (cli->noclass > 0 && cli->oclass[0].c == 0) oclass = cli->oclass[0].type; for (i = 0; i < cli->noclass; ++i) if (cli->oclass[i].c == c) oclass = cli->oclass[i].type; return oclass; } /** @param clp the parser * @param c character * @param type option character treatment * @return previous option character treatment, or -1 on error * * @a type specifies how CLP treats arguments that begin with character @a c. * Possibilities are: * *
*
Clp_NotOption (or 0)
*
The argument cannot be an option.
*
Clp_Long
*
The argument is a long option.
*
Clp_Short
*
The argument is a set of short options.
*
Clp_Short|Clp_Long
*
The argument is either a long option or, if no matching long option is * found, a set of short options.
*
Clp_LongNegated
*
The argument is a negated long option. For example, after * Clp_SetOptionChar(@a clp, '^', Clp_LongNegated), the argument "^foo" is * equivalent to "--no-foo".
*
Clp_ShortNegated
*
The argument is a set of negated short options.
*
Clp_ShortNegated|Clp_LongNegated
*
The argument is either a negated long option or, if no matching long * option is found, a set of negated short options.
*
Clp_LongImplicit
*
The argument may be a long option, where the character @a c is actually * part of the long option name. For example, after Clp_SetOptionChar(@a clp, * 'f', Clp_LongImplicit), the argument "foo" may be equivalent to * "--foo".
*
* * In UTF-8 mode, @a c may be any Unicode character. Otherwise, @a c must be * an unsigned char value. The special character 0 assigns @a type to @em * every character. * * It is an error if @a c is out of range, @a type is illegal, or there are * too many character definitions stored in @a clp already. The function * returns -1 on error. * * A double hyphen "--" always introduces a long option. This behavior cannot * currently be changed with Clp_SetOptionChar(). */ int Clp_SetOptionChar(Clp_Parser *clp, int c, int type) { int i, j, long1pos, long1neg; int old = Clp_OptionChar(clp, c); Clp_Internal *cli = clp->internal; if (type != Clp_NotOption && type != Clp_Short && type != Clp_Long && type != Clp_ShortNegated && type != Clp_LongNegated && type != Clp_LongImplicit && type != (Clp_Short | Clp_Long) && type != (Clp_ShortNegated | Clp_LongNegated)) return -1; if (c < 0 || c >= (cli->utf8 ? 0x110000 : 256)) return -1; if (c == 0) cli->noclass = 0; for (i = 0; i < cli->noclass; ++i) if (cli->oclass[i].c == c) break; if (i == Clp_OclassSize) return -1; cli->oclass[i].c = c; cli->oclass[i].type = type; if (cli->noclass == i) cli->noclass = i + 1; long1pos = long1neg = 0; for (i = 0; i < cli->noclass; ++i) { if ((cli->oclass[i].type & Clp_Short) && (cli->oclass[i].type & Clp_Long)) long1pos = 1; if ((cli->oclass[i].type & Clp_ShortNegated) && (cli->oclass[i].type & Clp_LongNegated)) long1neg = 1; } if (long1pos != cli->long1pos || long1neg != cli->long1neg) { /* Must recheck option set */ cli->long1pos = long1pos; cli->long1neg = long1neg; for (i = 0; i < cli->nopt; ++i) { cli->iopt[i].lmmpos = cli->iopt[i].lmmneg = 1; cli->iopt[i].lmmpos_short = cli->iopt[i].lmmneg_short = 0; for (j = 0; j < cli->nopt; ++j) compare_options(clp, &cli->opt[i], &cli->iopt[i], &cli->opt[j], &cli->iopt[j]); } } return old; } /** @param clp the parser * @param nopt number of option definitions * @param opt option definition array * @return 0 on success, -1 on failure * * Installs the option definitions in @a opt. Future option parsing will * use @a opt to search for options. * * Also checks @a opt's option definitions for validity. "CLP internal * errors" are reported via Clp_OptionError() if: * *
    *
  • An option has a negative ID.
    • *
  • Two different short options have the same name.
    • *
  • Two different long options have the same name.
    • *
  • A short and a long option are ambiguous, in that some option character * might introduce either a short or a long option (e.g., Clp_SetOptionChar(@a * clp, '-', Clp_Long|Clp_Short)), and a short name equals a long name.
    • *
* * If necessary memory cannot be allocated, this function returns -1 without * modifying the parser. * * @note The CLP library will not modify the contents of @a argv or @a opt. * The calling program must not modify @a opt either until another call to * Clp_SetOptions() or the parser is destroyed. */ int Clp_SetOptions(Clp_Parser *clp, int nopt, const Clp_Option *opt) { Clp_Internal *cli = clp->internal; Clp_InternOption *iopt; int i, j; static unsigned opt_generation = 0; if (nopt > cli->nopt) { iopt = (Clp_InternOption *)malloc(sizeof(Clp_InternOption) * nopt); if (!iopt) return -1; free(cli->iopt); cli->iopt = iopt; } cli->opt = opt; cli->nopt = nopt; cli->opt_generation = ++opt_generation; iopt = cli->iopt; cli->current_option = -1; /* Massage the options to make them usable */ for (i = 0; i < nopt; i++) { /* Ignore negative option_ids, which are internal to CLP */ if (opt[i].option_id < 0) { Clp_OptionError(clp, "CLP internal error: option %d has negative option_id", i); iopt[i].ilong = iopt[i].ishort = iopt[i].ipos = iopt[i].ineg = 0; continue; } /* Set flags based on input flags */ iopt[i].ilong = (opt[i].long_name != 0 && opt[i].long_name[0] != 0); iopt[i].ishort = (opt[i].short_name > 0 && opt[i].short_name < (cli->utf8 ? 0x110000 : 256)); iopt[i].ipos = 1; iopt[i].ineg = (opt[i].flags & Clp_Negate) != 0; iopt[i].imandatory = (opt[i].flags & Clp_Mandatory) != 0; iopt[i].ioptional = (opt[i].flags & Clp_Optional) != 0; iopt[i].iprefmatch = (opt[i].flags & Clp_PreferredMatch) != 0; iopt[i].ilongoff = 0; /* Enforce invariants */ if (opt[i].val_type <= 0) iopt[i].imandatory = iopt[i].ioptional = 0; if (opt[i].val_type > 0 && !iopt[i].ioptional) iopt[i].imandatory = 1; /* Options that start with 'no-' should be changed to OnlyNegated */ if (iopt[i].ilong && strncmp(opt[i].long_name, "no-", 3) == 0) { iopt[i].ipos = 0; iopt[i].ineg = 1; iopt[i].ilongoff = 3; if (strncmp(opt[i].long_name + 3, "no-", 3) == 0) Clp_OptionError(clp, "CLP internal error: option %d begins with \"no-no-\"", i); } else if (opt[i].flags & Clp_OnlyNegated) { iopt[i].ipos = 0; iopt[i].ineg = 1; } } /* Check option set */ for (i = 0; i < nopt; ++i) { iopt[i].lmmpos = iopt[i].lmmneg = 1; iopt[i].lmmpos_short = iopt[i].lmmneg_short = 0; for (j = 0; j < nopt; ++j) compare_options(clp, &opt[i], &iopt[i], &opt[j], &iopt[j]); } return 0; } /** @param clp the parser * @param argc number of arguments * @param argv argument array * * Installs the arguments in @a argv for parsing. Future option parsing will * analyze @a argv. * * Unlike Clp_NewParser(), this function does not treat @a argv[0] specially. * The first subsequent call to Clp_Next() will analyze @a argv[0]. * * This function also sets option processing to on, as by * Clp_SetOptionProcessing(@a clp, 1). * * @note The CLP library will not modify the contents of @a argv. The calling * program should not generally modify the element of @a argv that CLP is * currently analyzing. */ void Clp_SetArguments(Clp_Parser *clp, int argc, const char * const *argv) { Clp_Internal *cli = clp->internal; cli->argc = argc + 1; cli->argv = argv - 1; cli->is_short = 0; cli->whole_negated = 0; cli->option_processing = 1; cli->current_option = -1; } /** @param clp the parser * @param on whether to search for options * @return previous option processing setting * * When option processing is off, every call to Clp_Next() returns * Clp_NotOption. By default the option "--" turns off option * processing and is otherwise ignored. */ int Clp_SetOptionProcessing(Clp_Parser *clp, int on) { Clp_Internal *cli = clp->internal; int old = cli->option_processing; cli->option_processing = on; return old; } /******* * functions for Clp_Option lists **/ /* the ever-glorious argcmp */ static int argcmp(const char *ref, const char *arg, int min_match, int fewer_dashes) /* Returns 0 if ref and arg don't match. Returns -1 if ref and arg match, but fewer than min_match characters. Returns len if ref and arg match min_match or more characters; len is the number of characters that matched in arg. Allows arg to contain fewer dashes than ref iff fewer_dashes != 0. Examples: argcmp("x", "y", 1, 0) --> 0 / just plain wrong argcmp("a", "ax", 1, 0) --> 0 / ...even though min_match == 1 and the 1st chars match argcmp("box", "bo", 3, 0) --> -1 / ambiguous argcmp("cat", "c=3", 1, 0) --> 1 / handles = arguments */ { const char *refstart = ref; const char *argstart = arg; assert(min_match > 0); compare: while (*ref && *arg && *arg != '=' && *ref == *arg) ref++, arg++; /* Allow arg to contain fewer dashes than ref */ if (fewer_dashes && *ref == '-' && ref[1] && ref[1] == *arg) { ref++; goto compare; } if (*arg && *arg != '=') return 0; else if (ref - refstart < min_match) return -1; else return arg - argstart; } static int find_prefix_opt(Clp_Parser *clp, const char *arg, int nopt, const Clp_Option *opt, const Clp_InternOption *iopt, int *ambiguous, int *ambiguous_values) /* Looks for an unambiguous match of 'arg' against one of the long options in 'opt'. Returns positive if it finds one; otherwise, returns -1 and possibly changes 'ambiguous' and 'ambiguous_values' to keep track of at most MAX_AMBIGUOUS_VALUES possibilities. */ { int i, fewer_dashes = 0, first_ambiguous = *ambiguous; int negated = clp && clp->negated; int first_charlen = (clp ? clp_utf8_charlen(clp->internal, arg) : 1); retry: for (i = 0; i < nopt; i++) { int len, lmm; if (!iopt[i].ilong || (negated ? !iopt[i].ineg : !iopt[i].ipos)) continue; lmm = (negated ? iopt[i].lmmneg : iopt[i].lmmpos); if (clp && clp->internal->could_be_short && (negated ? iopt[i].lmmneg_short : iopt[i].lmmpos_short)) lmm = (first_charlen >= lmm ? first_charlen + 1 : lmm); len = argcmp(opt[i].long_name + iopt[i].ilongoff, arg, lmm, fewer_dashes); if (len > 0) return i; else if (len < 0) { if (*ambiguous < MAX_AMBIGUOUS_VALUES) ambiguous_values[*ambiguous] = i; (*ambiguous)++; } } /* If there were no partial matches, try again with fewer_dashes true */ if (*ambiguous == first_ambiguous && !fewer_dashes) { fewer_dashes = 1; goto retry; } return -1; } /***** * Argument parsing **/ static int val_type_binsearch(Clp_Internal *cli, int val_type) { unsigned l = 0, r = cli->nvaltype; while (l < r) { unsigned m = l + (r - l) / 2; if (cli->valtype[m].val_type == val_type) return m; else if (cli->valtype[m].val_type < val_type) l = m + 1; else r = m; } return l; } /** @param clp the parser * @param val_type value type ID * @param flags value type flags * @param parser parser function * @param user_data user data for @a parser function * @return 0 on success, -1 on failure * * Defines argument type @a val_type in parser @a clp. The parsing function * @a parser will be passed argument values for type @a val_type. It should * parse the argument into values (usually in @a clp->val, but sometimes * elsewhere), report errors if necessary, and return whether the parse was * successful. * * Any prior argument parser match @a val_type is removed. @a val_type must * be greater than zero. * * @a flags specifies additional parsing flags. At the moment the only * relevant flag is Clp_DisallowOptions, which means that separated values * must not look like options. For example, assume argument * --a/-a has mandatory value type Clp_ValStringNotOption * (which has Clp_DisallowOptions). Then: * *
    *
  • --a=--b will parse with value --b.
    • *
  • -a--b will parse with value --b.
    • *
  • --a --b will not parse, since the mandatory value looks like * an option.
    • *
  • -a --b will not parse, since the mandatory value looks like * an option.
    • *
*/ int Clp_AddType(Clp_Parser *clp, int val_type, int flags, Clp_ValParseFunc parser, void *user_data) { Clp_Internal *cli = clp->internal; int vtpos; if (val_type <= 0 || !parser) return -1; vtpos = val_type_binsearch(cli, val_type); if (vtpos == cli->nvaltype || cli->valtype[vtpos].val_type != val_type) { if (cli->nvaltype != 0 && (cli->nvaltype % Clp_InitialValType) == 0) { Clp_ValType *new_valtype = (Clp_ValType *) realloc(cli->valtype, sizeof(Clp_ValType) * (cli->nvaltype + Clp_InitialValType)); if (!new_valtype) return -1; cli->valtype = new_valtype; } memmove(&cli->valtype[vtpos + 1], &cli->valtype[vtpos], sizeof(Clp_ValType) * (cli->nvaltype - vtpos)); cli->nvaltype++; cli->valtype[vtpos].func = 0; } if (cli->valtype[vtpos].func == parse_string_list) { Clp_StringList *clsl = (Clp_StringList *) cli->valtype[vtpos].user_data; free(clsl->items); free(clsl->iopt); free(clsl); } cli->valtype[vtpos].val_type = val_type; cli->valtype[vtpos].func = parser; cli->valtype[vtpos].flags = flags; cli->valtype[vtpos].user_data = user_data; return 0; } /******* * Default argument parsers **/ static int parse_string(Clp_Parser *clp, const char *arg, int complain, void *user_data) { (void)complain, (void)user_data; clp->val.s = arg; return 1; } static int parse_int(Clp_Parser *clp, const char *arg, int complain, void *user_data) { const char *val; if (*arg == 0 || isspace((unsigned char) *arg) || (user_data != 0 && *arg == '-')) val = arg; else if (user_data != 0) { /* unsigned */ #if HAVE_STRTOUL clp->val.u = strtoul(arg, (char **) &val, 0); #else /* don't bother really trying to do it right */ if (arg[0] == '-') val = arg; else clp->val.u = strtol(arg, (char **) &val, 0); #endif } else clp->val.i = strtol(arg, (char **) &val, 0); if (*arg != 0 && *val == 0) return 1; else if (complain) { const char *message = user_data != 0 ? "%<%O%> expects a nonnegative integer, not %<%s%>" : "%<%O%> expects an integer, not %<%s%>"; return Clp_OptionError(clp, message, arg); } else return 0; } static int parse_double(Clp_Parser *clp, const char *arg, int complain, void *user_data) { const char *val; (void)user_data; if (*arg == 0 || isspace((unsigned char) *arg)) val = arg; else clp->val.d = strtod(arg, (char **) &val); if (*arg != 0 && *val == 0) return 1; else if (complain) return Clp_OptionError(clp, "%<%O%> expects a real number, not %<%s%>", arg); else return 0; } static int parse_bool(Clp_Parser *clp, const char *arg, int complain, void *user_data) { int i; char lcarg[6]; (void)user_data; if (strlen(arg) > 5 || strchr(arg, '=') != 0) goto error; for (i = 0; arg[i] != 0; i++) lcarg[i] = tolower((unsigned char) arg[i]); lcarg[i] = 0; if (argcmp("yes", lcarg, 1, 0) > 0 || argcmp("true", lcarg, 1, 0) > 0 || argcmp("1", lcarg, 1, 0) > 0) { clp->val.i = 1; return 1; } else if (argcmp("no", lcarg, 1, 0) > 0 || argcmp("false", lcarg, 1, 0) > 0 || argcmp("1", lcarg, 1, 0) > 0) { clp->val.i = 0; return 1; } error: if (complain) Clp_OptionError(clp, "%<%O%> expects a true-or-false value, not %<%s%>", arg); return 0; } /***** * Clp_AddStringListType **/ static int parse_string_list(Clp_Parser *clp, const char *arg, int complain, void *user_data) { Clp_StringList *sl = (Clp_StringList *)user_data; int idx, ambiguous = 0; int ambiguous_values[MAX_AMBIGUOUS_VALUES + 1]; /* actually look for a string value */ idx = find_prefix_opt (0, arg, sl->nitems, sl->items, sl->iopt, &ambiguous, ambiguous_values); if (idx >= 0) { clp->val.i = sl->items[idx].option_id; return 1; } if (sl->allow_int) { if (parse_int(clp, arg, 0, 0)) return 1; } if (complain) { const char *complaint = (ambiguous ? "ambiguous" : "invalid"); if (!ambiguous) { ambiguous = sl->nitems_invalid_report; for (idx = 0; idx < ambiguous; idx++) ambiguous_values[idx] = idx; } return ambiguity_error (clp, ambiguous, ambiguous_values, sl->items, sl->iopt, "", "option %<%O%> value %<%s%> is %s", arg, complaint); } else return 0; } static int finish_string_list(Clp_Parser *clp, int val_type, int flags, Clp_Option *items, int nitems, int itemscap) { int i, j; Clp_StringList *clsl = (Clp_StringList *)malloc(sizeof(Clp_StringList)); Clp_InternOption *iopt = (Clp_InternOption *)malloc(sizeof(Clp_InternOption) * nitems); if (!clsl || !iopt) goto error; clsl->items = items; clsl->iopt = iopt; clsl->nitems = nitems; clsl->allow_int = (flags & Clp_AllowNumbers) != 0; if (nitems < MAX_AMBIGUOUS_VALUES && nitems < itemscap && clsl->allow_int) { items[nitems].long_name = "any integer"; clsl->nitems_invalid_report = nitems + 1; } else if (nitems > MAX_AMBIGUOUS_VALUES + 1) clsl->nitems_invalid_report = MAX_AMBIGUOUS_VALUES + 1; else clsl->nitems_invalid_report = nitems; for (i = 0; i < nitems; i++) { iopt[i].ilong = iopt[i].ipos = 1; iopt[i].ishort = iopt[i].ineg = iopt[i].ilongoff = iopt[i].iprefmatch = 0; iopt[i].lmmpos = 1; iopt[i].lmmpos_short = 0; } for (i = 0; i < nitems; i++) for (j = 0; j < nitems; j++) compare_options(clp, &items[i], &iopt[i], &items[j], &iopt[j]); if (Clp_AddType(clp, val_type, 0, parse_string_list, clsl) >= 0) return 0; error: if (clsl) free(clsl); if (iopt) free(iopt); return -1; } /** @param clp the parser * @param val_type value type ID * @param flags string list flags * @return 0 on success, -1 on failure * * Defines argument type @a val_type in parser @a clp. The parsing function * sets @a clp->val.i to an integer. The value string is matched against * strings provided in the ellipsis arguments. For example, the * Clp_AddStringListType() call below has the same effect as the * Clp_AddStringListTypeVec() call: * * For example: * @code * Clp_AddStringListType(clp, 100, Clp_AllowNumbers, "cat", 1, * "cattle", 2, "dog", 3, (const char *) NULL); * * const char * const strs[] = { "cat", "cattle", "dog" }; * const int vals[] = { 1, 2, 3 }; * Clp_AddStringListTypeVec(clp, 100, Clp_AllowNumbers, 3, strs, vals); * @endcode * * @note The CLP library will not modify any of the passed-in strings. The * calling program must not modify or free them either until the parser is * destroyed. */ int Clp_AddStringListType(Clp_Parser *clp, int val_type, int flags, ...) { int nitems = 0; int itemscap = 5; Clp_Option *items = (Clp_Option *)malloc(sizeof(Clp_Option) * itemscap); va_list val; va_start(val, flags); if (!items) goto error; /* slurp up the arguments */ while (1) { int value; char *name = va_arg(val, char *); if (!name) break; value = va_arg(val, int); if (nitems >= itemscap) { Clp_Option *new_items; itemscap *= 2; new_items = (Clp_Option *)realloc(items, sizeof(Clp_Option) * itemscap); if (!new_items) goto error; items = new_items; } items[nitems].long_name = name; items[nitems].option_id = value; items[nitems].flags = 0; nitems++; } va_end(val); if (finish_string_list(clp, val_type, flags, items, nitems, itemscap) >= 0) return 0; error: va_end(val); if (items) free(items); return -1; } /** @param clp the parser * @param val_type value type ID * @param flags string list flags * @param nstrs number of strings in list * @param strs array of strings * @param vals array of values * @return 0 on success, -1 on failure * * Defines argument type @a val_type in parser @a clp. The parsing function * sets @a clp->val.i to an integer. The value string is matched against the * @a strs. If there's a unique match, the corresponding entry from @a vals * is returned. Unique prefix matches also work. Finally, if @a flags * contains the Clp_AllowNumbers flag, then integers are also accepted. * * For example: * @code * const char * const strs[] = { "cat", "cattle", "dog" }; * const int vals[] = { 1, 2, 3 }; * Clp_AddStringListTypeVec(clp, 100, Clp_AllowNumbers, 3, strs, vals); * @endcode * * Say that option --animal takes value type 100. Then: * *
    *
  • --animal=cat will succeed and set @a clp->val.i = 1.
    • *
  • --animal=cattle will succeed and set @a clp->val.i = 2.
    • *
  • --animal=dog will succeed and set @a clp->val.i = 3.
    • *
  • --animal=d will succeed and set @a clp->val.i = 3.
    • *
  • --animal=c will fail, since c is ambiguous.
    • *
  • --animal=4 will succeed and set @a clp->val.i = 4.
    • *
* * @note The CLP library will not modify the contents of @a strs or @a vals. * The calling program can modify the @a strs array, but the actual strings * (for instance, @a strs[0] and @a strs[1]) must not be modified or freed * until the parser is destroyed. */ int Clp_AddStringListTypeVec(Clp_Parser *clp, int val_type, int flags, int nstrs, const char * const *strs, const int *vals) /* An alternate way to make a string list type. See Clp_AddStringListType for the basics; this coalesces the strings and values into two arrays, rather than spreading them out into a variable argument list. */ { int i; int itemscap = (nstrs < 5 ? 5 : nstrs); Clp_Option *items = (Clp_Option *)malloc(sizeof(Clp_Option) * itemscap); if (!items) return -1; /* copy over items */ for (i = 0; i < nstrs; i++) { items[i].long_name = strs[i]; items[i].option_id = vals[i]; items[i].flags = 0; } if (finish_string_list(clp, val_type, flags, items, nstrs, itemscap) >= 0) return 0; else { free(items); return -1; } } /******* * Returning information **/ const char * Clp_ProgramName(Clp_Parser *clp) { return clp->internal->program_name; } /** @param clp the parser * @param name new program name * @return previous program name * * The calling program should not modify or free @a name until @a clp itself * is destroyed. */ const char * Clp_SetProgramName(Clp_Parser *clp, const char *name) { const char *old = clp->internal->program_name; clp->internal->program_name = name; return old; } /****** * Clp_ParserStates **/ /** @return the parser state * * A Clp_ParserState object can store a parsing state of a Clp_Parser object. * This state specifies exactly how far the Clp_Parser has gotten in parsing * an argument list. The Clp_SaveParser() and Clp_RestoreParser() functions * can be used to save this state and then restore it later, allowing a * Clp_Parser to switch among argument lists. * * The initial state is empty, in that after Clp_RestoreParser(clp, state), * Clp_Next(clp) would return Clp_Done. * * Parser states can be saved and restored among different parser objects. * * @sa Clp_DeleteParserState, Clp_SaveParser, Clp_RestoreParser */ Clp_ParserState * Clp_NewParserState(void) { Clp_ParserState *state = (Clp_ParserState *)malloc(sizeof(Clp_ParserState)); if (state) { state->argv = 0; state->argc = 0; state->option_chars[0] = 0; state->xtext = 0; state->option_processing = 0; state->opt_generation = 0; state->current_option = -1; state->is_short = 0; state->whole_negated = 0; state->current_short = 0; state->negated_by_no = 0; } return state; } /** @param state parser state * * The memory associated with @a state is freed. */ void Clp_DeleteParserState(Clp_ParserState *state) { free(state); } /** @param clp the parser * @param state parser state * @sa Clp_NewParserState, Clp_RestoreParser */ void Clp_SaveParser(const Clp_Parser *clp, Clp_ParserState *state) { Clp_Internal *cli = clp->internal; state->argv = cli->argv; state->argc = cli->argc; memcpy(state->option_chars, cli->option_chars, Clp_OptionCharsSize); state->xtext = cli->xtext; state->option_processing = cli->option_processing; state->opt_generation = cli->opt_generation; state->current_option = cli->current_option; state->is_short = cli->is_short; state->whole_negated = cli->whole_negated; state->current_short = cli->current_short; state->negated_by_no = cli->negated_by_no; } /** @param clp the parser * @param state parser state * * The parser state in @a state is restored into @a clp. The next call to * Clp_Next() will return the same result as it would have at the time @a * state was saved (probably by Clp_SaveParser(@a clp, @a state)). * * A parser state contains information about arguments (argc and argv; see * Clp_SetArguments()) and option processing (Clp_SetOptionProcessing()), but * not about options (Clp_SetOptions()). Changes to options and value types * are preserved across Clp_RestoreParser(). * * @sa Clp_NewParserState, Clp_SaveParser */ void Clp_RestoreParser(Clp_Parser *clp, const Clp_ParserState *state) { Clp_Internal *cli = clp->internal; cli->argv = state->argv; cli->argc = state->argc; memcpy(cli->option_chars, state->option_chars, Clp_OptionCharsSize); cli->xtext = state->xtext; cli->option_processing = state->option_processing; cli->is_short = state->is_short; cli->whole_negated = state->whole_negated; cli->current_short = state->current_short; cli->negated_by_no = state->negated_by_no; if (cli->opt_generation == state->opt_generation) cli->current_option = state->current_option; else cli->current_option = -1; } /******* * Clp_Next and its helpers **/ static void set_option_text(Clp_Internal *cli, const char *text, int n_option_chars) { assert(n_option_chars < Clp_OptionCharsSize); memcpy(cli->option_chars, text, n_option_chars); cli->option_chars[n_option_chars] = 0; cli->xtext = text + n_option_chars; } static int get_oclass(Clp_Parser *clp, const char *text, int *ocharskip) { int c; if (clp->internal->utf8) { const char *s; c = decode_utf8(text, &s); *ocharskip = s - text; } else { c = (unsigned char) text[0]; *ocharskip = 1; } return Clp_OptionChar(clp, c); } static int next_argument(Clp_Parser *clp, int want_argument) /* Moves clp to the next argument. Returns 1 if it finds another option. Returns 0 if there aren't any more arguments. Returns 0, sets clp->have_val = 1, and sets clp->vstr to the argument if the next argument isn't an option. If want_argument > 0, it'll look for an argument. want_argument == 1: Accept arguments that start with Clp_NotOption or Clp_LongImplicit. want_argument == 2: Accept ALL arguments. Where is the option stored when this returns? Well, cli->argv[0] holds the whole of the next command line argument. cli->option_chars holds a string: what characters began the option? It is generally "-" or "--". cli->text holds the text of the option: for short options, cli->text[0] is the relevant character; for long options, cli->text holds the rest of the option. */ { Clp_Internal *cli = clp->internal; const char *text; int oclass, ocharskip; /* clear relevant flags */ clp->have_val = 0; clp->vstr = 0; cli->could_be_short = 0; /* if we're in a string of short options, move up one char in the string */ if (cli->is_short) { cli->xtext += clp_utf8_charlen(cli, cli->xtext); if (cli->xtext[0] == 0) cli->is_short = 0; else if (want_argument > 0) { /* handle -O[=]argument case */ clp->have_val = 1; if (cli->xtext[0] == '=') clp->vstr = cli->xtext + 1; else clp->vstr = cli->xtext; cli->is_short = 0; return 0; } } /* if in short options, we're all set */ if (cli->is_short) return 1; /** if not in short options, move to the next argument **/ cli->whole_negated = 0; cli->xtext = 0; if (cli->argc <= 1) return 0; cli->argc--; cli->argv++; text = cli->argv[0]; if (want_argument > 1) goto not_option; if (text[0] == '-' && text[1] == '-') { oclass = Clp_DoubledLong; ocharskip = 2; } else oclass = get_oclass(clp, text, &ocharskip); /* If this character could introduce either a short or a long option, try a long option first, but remember that short's a possibility for later. */ if ((oclass & (Clp_Short | Clp_ShortNegated)) && (oclass & (Clp_Long | Clp_LongNegated))) { oclass &= ~(Clp_Short | Clp_ShortNegated); if (text[ocharskip]) cli->could_be_short = 1; } switch (oclass) { case Clp_Short: cli->is_short = 1; goto check_singleton; case Clp_ShortNegated: cli->is_short = 1; cli->whole_negated = 1; goto check_singleton; case Clp_Long: goto check_singleton; case Clp_LongNegated: cli->whole_negated = 1; goto check_singleton; check_singleton: /* For options introduced with one character, option-char, '[option-char]' alone is NOT an option. */ if (!text[ocharskip]) goto not_option; set_option_text(cli, text, ocharskip); break; case Clp_LongImplicit: /* LongImplict: option_chars == "" (since all chars are part of the option); restore head -> text of option */ if (want_argument > 0) goto not_option; set_option_text(cli, text, 0); break; case Clp_DoubledLong: set_option_text(cli, text, ocharskip); break; not_option: case Clp_NotOption: cli->is_short = 0; clp->have_val = 1; clp->vstr = text; return 0; default: assert(0 /* CLP misconfiguration: bad option type */); } return 1; } static void switch_to_short_argument(Clp_Parser *clp) { Clp_Internal *cli = clp->internal; const char *text = cli->argv[0]; int ocharskip, oclass = get_oclass(clp, text, &ocharskip); assert(cli->could_be_short); cli->is_short = 1; cli->whole_negated = (oclass & Clp_ShortNegated ? 1 : 0); set_option_text(cli, cli->argv[0], ocharskip); } static int find_long(Clp_Parser *clp, const char *arg) /* If arg corresponds to one of clp's options, finds that option & returns it. If any argument is given after an = sign in arg, sets clp->have_val = 1 and clp->vstr to that argument. Sets cli->ambiguous to 1 iff there was no match because the argument was ambiguous. */ { Clp_Internal *cli = clp->internal; int optno, len, lmm; const Clp_Option *opt = cli->opt; const Clp_InternOption *iopt; int first_negative_ambiguous; /* Look for a normal option. */ optno = find_prefix_opt (clp, arg, cli->nopt, opt, cli->iopt, &cli->ambiguous, cli->ambiguous_values); if (optno >= 0) goto worked; /* If we can't find it, look for a negated option. */ /* I know this is silly, but it makes me happy to accept --no-no-option as a double negative synonym for --option. :) */ first_negative_ambiguous = cli->ambiguous; while (arg[0] == 'n' && arg[1] == 'o' && arg[2] == '-') { arg += 3; clp->negated = !clp->negated; optno = find_prefix_opt (clp, arg, cli->nopt, opt, cli->iopt, &cli->ambiguous, cli->ambiguous_values); if (optno >= 0) goto worked; } /* No valid option was found; return 0. Mark the ambiguous values found through '--no' by making them negative. */ { int i, max = cli->ambiguous; if (max > MAX_AMBIGUOUS_VALUES) max = MAX_AMBIGUOUS_VALUES; for (i = first_negative_ambiguous; i < max; i++) cli->ambiguous_values[i] = -cli->ambiguous_values[i] - 1; } return -1; worked: iopt = &cli->iopt[optno]; lmm = (clp->negated ? iopt->lmmneg : iopt->lmmpos); if (cli->could_be_short && (clp->negated ? iopt->lmmneg_short : iopt->lmmpos_short)) { int first_charlen = clp_utf8_charlen(cli, arg); lmm = (first_charlen >= lmm ? first_charlen + 1 : lmm); } len = argcmp(opt[optno].long_name + iopt->ilongoff, arg, lmm, 1); assert(len > 0); if (arg[len] == '=') { clp->have_val = 1; clp->vstr = arg + len + 1; } return optno; } static int find_short(Clp_Parser *clp, const char *text) /* If short_name corresponds to one of clp's options, returns it. */ { Clp_Internal *cli = clp->internal; const Clp_Option *opt = cli->opt; const Clp_InternOption *iopt = cli->iopt; int i, c; if (clp->internal->utf8) c = decode_utf8(text, 0); else c = (unsigned char) *text; for (i = 0; i < cli->nopt; i++) if (iopt[i].ishort && opt[i].short_name == c && (clp->negated ? iopt[i].ineg : iopt[i].ipos)) return i; return -1; } /** @param clp the parser * @return option ID of next option * * Parse the next argument from the argument list, store information about * that argument in the fields of @a clp, and return the option's ID. * * If an argument was successfully parsed, that option's ID is returned. * Other possible return values are: * *
*
Clp_Done
*
There are no more arguments.
*
Clp_NotOption
*
The next argument was not an option. The argument's text is @a * clp->vstr (and @a clp->val.s).
*
Clp_BadOption
*
The next argument was a bad option: either an option that wasn't * understood, or an option lacking a required value, or an option whose value * couldn't be parsed. The option has been skipped.
*
Clp_Error
*
There was an internal error. This should never occur unless a user * messes with, for example, a Clp_Option array.
*
* * The fields of @a clp are set as follows. * *
*
negated
*
1 if the option was negated, 0 if it wasn't.
*
have_val
*
1 if the option had a value, 0 if it didn't. Note that negated options * are not allowed to have values.
*
vstr
*
The value string, if any. NULL if there was no value.
*
val
*
An option's value type will parse the value string into this * union.
*
* * The parsed argument is shifted off the argument list, so that sequential * calls to Clp_Next() step through the arugment list. */ int Clp_Next(Clp_Parser *clp) { Clp_Internal *cli = clp->internal; int optno; const Clp_Option *opt; Clp_ParserState clpsave; int vtpos, complain; /* Set up clp */ cli->current_option = -1; cli->ambiguous = 0; /* Get the next argument or option */ if (!next_argument(clp, cli->option_processing ? 0 : 2)) { clp->val.s = clp->vstr; return clp->have_val ? Clp_NotOption : Clp_Done; } clp->negated = cli->whole_negated; if (cli->is_short) optno = find_short(clp, cli->xtext); else optno = find_long(clp, cli->xtext); /* If there's ambiguity between long & short options, and we couldn't find a long option, look for a short option */ if (optno < 0 && cli->could_be_short) { switch_to_short_argument(clp); optno = find_short(clp, cli->xtext); } /* If we didn't find an option... */ if (optno < 0 || (clp->negated && !cli->iopt[optno].ineg)) { /* default processing for the "--" option: turn off option processing and return the next argument */ if (strcmp(cli->argv[0], "--") == 0) { Clp_SetOptionProcessing(clp, 0); return Clp_Next(clp); } /* otherwise, report some error or other */ if (cli->ambiguous) ambiguity_error(clp, cli->ambiguous, cli->ambiguous_values, cli->opt, cli->iopt, cli->option_chars, "option %<%s%s%> is ambiguous", cli->option_chars, cli->xtext); else if (cli->is_short && !cli->could_be_short) Clp_OptionError(clp, "unrecognized option %<%s%C%>", cli->option_chars, cli->xtext); else Clp_OptionError(clp, "unrecognized option %<%s%s%>", cli->option_chars, cli->xtext); return Clp_BadOption; } /* Set the current option */ cli->current_option = optno; cli->current_short = cli->is_short; cli->negated_by_no = clp->negated && !cli->whole_negated; /* The no-argument (or should-have-no-argument) case */ if (clp->negated || (!cli->iopt[optno].imandatory && !cli->iopt[optno].ioptional)) { if (clp->have_val) { Clp_OptionError(clp, "%<%O%> can%,t take an argument"); return Clp_BadOption; } else return cli->opt[optno].option_id; } /* Get an argument if we need one, or if it's optional */ /* Sanity-check the argument type. */ opt = &cli->opt[optno]; if (opt->val_type <= 0) return Clp_Error; vtpos = val_type_binsearch(cli, opt->val_type); if (vtpos == cli->nvaltype || cli->valtype[vtpos].val_type != opt->val_type) return Clp_Error; /* complain == 1 only if the argument was explicitly given, or it is mandatory. */ complain = (clp->have_val != 0) || cli->iopt[optno].imandatory; Clp_SaveParser(clp, &clpsave); if (cli->iopt[optno].imandatory && !clp->have_val) { /* Mandatory argument case */ /* Allow arguments to options to start with a dash, but only if the argument type allows it by not setting Clp_DisallowOptions */ int disallow = (cli->valtype[vtpos].flags & Clp_DisallowOptions) != 0; next_argument(clp, disallow ? 1 : 2); if (!clp->have_val) { int got_option = cli->xtext != 0; Clp_RestoreParser(clp, &clpsave); if (got_option) Clp_OptionError(clp, "%<%O%> requires a non-option argument"); else Clp_OptionError(clp, "%<%O%> requires an argument"); return Clp_BadOption; } } else if (cli->is_short && !clp->have_val && cli->xtext[clp_utf8_charlen(cli, cli->xtext)]) /* The -[option]argument case: Assume that the rest of the current string is the argument. */ next_argument(clp, 1); /* Parse the argument */ if (clp->have_val) { Clp_ValType *atr = &cli->valtype[vtpos]; if (atr->func(clp, clp->vstr, complain, atr->user_data) <= 0) { /* parser failed */ clp->have_val = 0; if (cli->iopt[optno].imandatory) return Clp_BadOption; else Clp_RestoreParser(clp, &clpsave); } } return opt->option_id; } /** @param clp the parser * @param allow_options whether options will be allowed * * Remove and return the next argument from @a clp's argument array. If there * are no arguments left, or if the next argument is an option and @a * allow_options != 0, then returns null. */ const char * Clp_Shift(Clp_Parser *clp, int allow_options) /* Returns the next argument from the argument list without parsing it. If there are no more arguments, returns 0. */ { Clp_ParserState clpsave; Clp_SaveParser(clp, &clpsave); next_argument(clp, allow_options ? 2 : 1); if (!clp->have_val) Clp_RestoreParser(clp, &clpsave); return clp->vstr; } /******* * Clp_OptionError **/ typedef struct Clp_BuildString { char *text; char *pos; int capacity; int bad; } Clp_BuildString; static Clp_BuildString * new_build_string(void) { Clp_BuildString *bs = (Clp_BuildString *)malloc(sizeof(Clp_BuildString)); if (!bs) goto bad; bs->text = (char *)malloc(256); if (!bs->text) goto bad; bs->pos = bs->text; bs->capacity = 256; bs->bad = 0; return bs; bad: if (bs) free(bs); return 0; } static void free_build_string(Clp_BuildString *bs) { if (bs) free(bs->text); free(bs); } static int grow_build_string(Clp_BuildString *bs, int want) { char *new_text; int ipos = bs->pos - bs->text; int new_capacity = bs->capacity; while (want >= new_capacity) new_capacity *= 2; new_text = (char *)realloc(bs->text, new_capacity); if (!new_text) { bs->bad = 1; return 0; } else { bs->text = new_text; bs->pos = bs->text + ipos; bs->capacity = new_capacity; return 1; } } #define ENSURE_BUILD_STRING(bs, space) \ ((((bs)->pos - (bs)->text) + (space) >= (bs)->capacity) \ || grow_build_string((bs), ((bs)->pos - (bs)->text) + (space))) static void append_build_string(Clp_BuildString *bs, const char *s, int l) { if (l < 0) l = strlen(s); if (ENSURE_BUILD_STRING(bs, l)) { memcpy(bs->pos, s, l); bs->pos += l; } } static Clp_BuildString * Clp_VaOptionError(Clp_Parser *clp, Clp_BuildString *bs, const char *fmt, va_list val) { Clp_Internal *cli = clp->internal; const char *percent; int c; if (!bs) bs = new_build_string(); if (!bs) return 0; if (cli->program_name && cli->program_name[0]) { append_build_string(bs, cli->program_name, -1); append_build_string(bs, ": ", 2); } for (percent = strchr(fmt, '%'); percent; percent = strchr(fmt, '%')) { append_build_string(bs, fmt, percent - fmt); switch (*++percent) { case 's': { const char *s = va_arg(val, const char *); if (s) append_build_string(bs, s, -1); else append_build_string(bs, "(null)", 6); break; } case 'C': { const char *s = va_arg(val, const char *); if (cli->utf8) c = decode_utf8(s, 0); else c = (unsigned char) *s; goto char_c; } case 'c': c = va_arg(val, int); goto char_c; char_c: if (ENSURE_BUILD_STRING(bs, 4)) { if (c >= 32 && c <= 126) *bs->pos++ = c; else if (c < 32) { *bs->pos++ = '^'; *bs->pos++ = c + 64; } else if (cli->utf8 && c >= 127 && c < 0x110000) { bs->pos = encode_utf8(bs->pos, 4, c); } else if (c >= 127 && c <= 255) { sprintf(bs->pos, "\\%03o", c & 0xFF); bs->pos += 4; } else { *bs->pos++ = '\\'; *bs->pos++ = '?'; } } break; case 'd': { int d = va_arg(val, int); if (ENSURE_BUILD_STRING(bs, 32)) { sprintf(bs->pos, "%d", d); bs->pos = strchr(bs->pos, 0); } break; } case 'O': { int optno = cli->current_option; const Clp_Option *opt = &cli->opt[optno]; if (optno < 0) append_build_string(bs, "(no current option!)", -1); else if (cli->current_short) { append_build_string(bs, cli->option_chars, -1); if (ENSURE_BUILD_STRING(bs, 5)) { if (cli->utf8) bs->pos = encode_utf8(bs->pos, 5, opt->short_name); else *bs->pos++ = opt->short_name; } } else if (cli->negated_by_no) { append_build_string(bs, cli->option_chars, -1); append_build_string(bs, "no-", 3); append_build_string(bs, opt->long_name + cli->iopt[optno].ilongoff, -1); } else { append_build_string(bs, cli->option_chars, -1); append_build_string(bs, opt->long_name + cli->iopt[optno].ilongoff, -1); } break; } case '%': if (ENSURE_BUILD_STRING(bs, 1)) *bs->pos++ = '%'; break; case '`': /* backwards compatibility */ case '<': append_build_string(bs, (cli->utf8 ? "\342\200\230" : "'"), -1); break; case '\'': /* backwards compatibility */ case ',': case '>': append_build_string(bs, (cli->utf8 ? "\342\200\231" : "'"), -1); break; default: if (ENSURE_BUILD_STRING(bs, 2)) { *bs->pos++ = '%'; *bs->pos++ = *percent; } break; } fmt = ++percent; } append_build_string(bs, fmt, -1); append_build_string(bs, "\n", 1); return bs; } static void do_error(Clp_Parser *clp, Clp_BuildString *bs) { const char *text; if (bs && !bs->bad) { *bs->pos = 0; text = bs->text; } else text = "out of memory\n"; if (clp->internal->error_handler != 0) (*clp->internal->error_handler)(clp, text); else fputs(text, stderr); } /** @param clp the parser * @param format error format * * Format an error message from @a format and any additional arguments in the * ellipsis. The resulting error string by printing it to standard error or * passing it to Clp_SetErrorHandler. * * The following format characters are accepted: * *
*
%c
*
A character (type int). Control characters are printed in * caret notation. If the parser is in UTF-8 mode, the character is formatted * in UTF-8. Otherwise, special characters are printed with backslashes and * octal notation.
*
%s
*
A string (type const char *).
*
%C
*
The argument is a string (type const char *). The first * character in this string is printed. If the parser is in UTF-8 mode, this * may involve multiple bytes.
*
%d
*
An integer (type int). Printed in decimal.
*
%O
*
The current option. No values are read from the argument list; the * current option is defined in the Clp_Parser object itself.
*
%%
*
Prints a percent character.
*
%<
*
Prints an open quote string. In UTF-8 mode, prints a left single * quote. Otherwise prints a single quote.
*
%>
*
Prints a closing quote string. In UTF-8 mode, prints a right single * quote. Otherwise prints a single quote.
*
%,
*
Prints an apostrophe. In UTF-8 mode, prints a right single quote. * Otherwise prints a single quote.
*
* * Note that no flag characters, precision, or field width characters are * currently supported. * * @sa Clp_SetErrorHandler */ int Clp_OptionError(Clp_Parser *clp, const char *format, ...) { Clp_BuildString *bs; va_list val; va_start(val, format); bs = Clp_VaOptionError(clp, 0, format, val); va_end(val); do_error(clp, bs); free_build_string(bs); return 0; } static int ambiguity_error(Clp_Parser *clp, int ambiguous, int *ambiguous_values, const Clp_Option *opt, const Clp_InternOption *iopt, const char *prefix, const char *fmt, ...) { Clp_Internal *cli = clp->internal; Clp_BuildString *bs; int i; va_list val; va_start(val, fmt); bs = Clp_VaOptionError(clp, 0, fmt, val); if (!bs) goto done; if (clp->internal->program_name && clp->internal->program_name[0]) { append_build_string(bs, clp->internal->program_name, -1); append_build_string(bs, ": ", 2); } append_build_string(bs, "(Possibilities are", -1); for (i = 0; i < ambiguous && i < MAX_AMBIGUOUS_VALUES; i++) { int value = ambiguous_values[i]; const char *no_dash = ""; if (value < 0) value = -(value + 1), no_dash = "no-"; if (i == 0) append_build_string(bs, " ", 1); else if (i == ambiguous - 1) append_build_string(bs, (i == 1 ? " and " : ", and "), -1); else append_build_string(bs, ", ", 2); append_build_string(bs, (cli->utf8 ? "\342\200\230" : "'"), -1); append_build_string(bs, prefix, -1); append_build_string(bs, no_dash, -1); append_build_string(bs, opt[value].long_name + iopt[value].ilongoff, -1); append_build_string(bs, (cli->utf8 ? "\342\200\231" : "'"), -1); } if (ambiguous > MAX_AMBIGUOUS_VALUES) append_build_string(bs, ", and others", -1); append_build_string(bs, ".)\n", -1); va_end(val); done: do_error(clp, bs); free_build_string(bs); return 0; } static int copy_string(char *buf, int buflen, int bufpos, const char *what) { int l = strlen(what); if (l > buflen - bufpos - 1) l = buflen - bufpos - 1; memcpy(buf + bufpos, what, l); return l; } /** @param clp the parser * @param buf output buffer * @param len length of output buffer * @return number of characters written to the buffer, not including the terminating NUL * * A string that looks like the last option parsed by @a clp is extracted into * @a buf. The correct option characters are put into the string first, * followed by the option text. The output buffer is null-terminated unless * @a len == 0. * * @sa Clp_CurOptionName */ int Clp_CurOptionNameBuf(Clp_Parser *clp, char *buf, int len) { Clp_Internal *cli = clp->internal; int optno = cli->current_option; int pos = 0; if (optno < 0) pos += copy_string(buf, len, pos, "(no current option!)"); else if (cli->current_short) { pos += copy_string(buf, len, pos, cli->option_chars); if (cli->utf8) pos = (encode_utf8(buf + pos, len - pos - 1, cli->opt[optno].short_name) - buf); else if (pos < len - 1) buf[pos++] = cli->opt[optno].short_name; } else if (cli->negated_by_no) { pos += copy_string(buf, len, pos, cli->option_chars); pos += copy_string(buf, len, pos, "no-"); pos += copy_string(buf, len, pos, cli->opt[optno].long_name + cli->iopt[optno].ilongoff); } else { pos += copy_string(buf, len, pos, cli->option_chars); pos += copy_string(buf, len, pos, cli->opt[optno].long_name + cli->iopt[optno].ilongoff); } if (pos < len) buf[pos] = 0; return pos; } /** @param clp the parser * @return string describing the current option * * This function acts like Clp_CurOptionNameBuf(), but returns a pointer into * a static buffer that will be rewritten on the next call to * Clp_CurOptionName(). * * @note This function is not thread safe. * * @sa Clp_CurOptionName */ const char * Clp_CurOptionName(Clp_Parser *clp) { static char buf[256]; Clp_CurOptionNameBuf(clp, buf, 256); return buf; } #ifdef __cplusplus } #endif t1utils-1.37/configure0000755000076400007640000053166411602730463011732 00000000000000#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.64. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software # Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH if test "x$CONFIG_SHELL" = x; then as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which # is contrary to our usage. Disable this feature. alias -g '\${1+\"\$@\"}'='\"\$@\"' setopt NO_GLOB_SUBST else case \`(set -o) 2>/dev/null\` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi " as_required="as_fn_return () { (exit \$1); } as_fn_success () { as_fn_return 0; } as_fn_failure () { as_fn_return 1; } as_fn_ret_success () { return 0; } as_fn_ret_failure () { return 1; } exitcode=0 as_fn_success || { exitcode=1; echo as_fn_success failed.; } as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : else exitcode=1; echo positional parameters were not saved. fi test x\$exitcode = x0 || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 test \$(( 1 + 1 )) = 2 || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else as_have_required=no fi if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. as_found=: case $as_dir in #( /*) for as_base in sh bash ksh sh5; do # Try only shells that exist, to save several forks. as_shell=$as_dir/$as_base if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : CONFIG_SHELL=$as_shell as_have_required=yes if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : break 2 fi fi done;; esac as_found=false done $as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : CONFIG_SHELL=$SHELL as_have_required=yes fi; } IFS=$as_save_IFS if test "x$CONFIG_SHELL" != x; then : # We cannot yet assume a decent shell, so we have to provide a # neutralization value for shells without unset; and this also # works around shells that cannot unset nonexistent variables. BASH_ENV=/dev/null ENV=/dev/null (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test x$as_have_required = xno; then : $as_echo "$0: This script requires a shell more modern than all" $as_echo "$0: the shells that I found on your system." if test x${ZSH_VERSION+set} = xset ; then $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, $0: including any error possibly output before this $0: message. Then install a modern shell, or manually run $0: the script under such a shell if you do have one." fi exit 1 fi fi fi SHELL=${CONFIG_SHELL-/bin/sh} export SHELL # Unset more variables known to interfere with behavior of common tools. CLICOLOR_FORCE= GREP_OPTIONS= unset CLICOLOR_FORCE GREP_OPTIONS ## --------------------- ## ## M4sh Shell Functions. ## ## --------------------- ## # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_lineno_1=$LINENO as_lineno_1a=$LINENO as_lineno_2=$LINENO as_lineno_2a=$LINENO eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= # Identity of this package. PACKAGE_NAME= PACKAGE_TARNAME= PACKAGE_VERSION= PACKAGE_STRING= PACKAGE_BUGREPORT= PACKAGE_URL= ac_unique_file="t1ascii.c" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='am__EXEEXT_FALSE am__EXEEXT_TRUE LTLIBOBJS host_os host_vendor host_cpu host build_os build_vendor build_cpu build EGREP GREP CPP LIBOBJS am__fastdepCC_FALSE am__fastdepCC_TRUE CCDEPMODE AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE am__quote am__include DEPDIR OBJEXT EXEEXT ac_ct_CC CPPFLAGS LDFLAGS CFLAGS CC MAINT MAINTAINER_MODE_FALSE MAINTAINER_MODE_TRUE am__untar am__tar AMTAR am__leading_dot SET_MAKE AWK mkdir_p MKDIR_P INSTALL_STRIP_PROGRAM STRIP install_sh MAKEINFO AUTOHEADER AUTOMAKE AUTOCONF ACLOCAL VERSION PACKAGE CYGPATH_W am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM target_alias host_alias build_alias LIBS ECHO_T ECHO_N ECHO_C DEFS mandir localedir libdir psdir pdfdir dvidir htmldir infodir docdir oldincludedir includedir localstatedir sharedstatedir sysconfdir datadir datarootdir libexecdir sbindir bindir program_transform_name prefix exec_prefix PACKAGE_URL PACKAGE_BUGREPORT PACKAGE_STRING PACKAGE_VERSION PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking enable_maintainer_mode enable_dependency_tracking enable_warnings enable_multiplatform ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && as_fn_error "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) as_fn_error "unrecognized option: \`$ac_option' Try \`$0 --help' for more information." ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. case $ac_envvar in #( '' | [0-9]* | *[!_$as_cr_alnum]* ) as_fn_error "invalid variable name: \`$ac_envvar'" ;; esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` as_fn_error "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || as_fn_error "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || as_fn_error "pwd does not report name of working directory" # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures this package to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi if test -n "$ac_init_help"; then cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-warnings compile with -Wall --enable-multiplatform put executables into bin/PLATFORM and libraries into lib/PLATFORM Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. Report bugs to the package provider. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF configure generated by GNU Autoconf 2.64 Copyright (C) 2009 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## # ac_fn_c_try_compile LINENO # -------------------------- # Try to compile conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} return $ac_retval } # ac_fn_c_try_compile # ac_fn_c_try_link LINENO # ----------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_link () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack rm -f conftest.$ac_objext conftest$ac_exeext if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would # interfere with the next link command; also delete a directory that is # left behind by Apple's compiler. We do this before executing the actions. rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} return $ac_retval } # ac_fn_c_try_link # ac_fn_c_check_func LINENO FUNC VAR # ---------------------------------- # Tests whether FUNC exists, setting the cache variable VAR accordingly ac_fn_c_check_func () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Define $2 to an innocuous variant, in case declares $2. For example, HP-UX 11i declares gettimeofday. */ #define $2 innocuous_$2 /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $2 (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $2 /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $2 (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$2 || defined __stub___$2 choke me #endif int main () { return $2 (); ; return 0; } _ACEOF if ac_fn_c_try_link "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext \ conftest$ac_exeext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_func # ac_fn_c_try_cpp LINENO # ---------------------- # Try to preprocess conftest.$ac_ext, and return whether this succeeded. ac_fn_c_try_cpp () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err ac_status=$? if test -s conftest.err; then grep -v '^ *+' conftest.err >conftest.er1 cat conftest.er1 >&5 mv -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : ac_retval=0 else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=1 fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} return $ac_retval } # ac_fn_c_try_cpp # ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists, giving a warning if it cannot be compiled using # the include files in INCLUDES and setting the cache variable VAR # accordingly. ac_fn_c_check_header_mongrel () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 $as_echo_n "checking $2 usability... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_header_compiler=yes else ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 $as_echo_n "checking $2 presence... " >&6; } cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <$2> _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : ac_header_preproc=yes else ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( yes:no: ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; no:yes:* ) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} ;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=\$ac_header_compiler" fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_mongrel # ac_fn_c_try_run LINENO # ---------------------- # Try to link conftest.$ac_ext, and return whether this succeeded. Assumes # that executables *can* be run. ac_fn_c_try_run () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then : ac_retval=0 else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_retval=$ac_status fi rm -rf conftest.dSYM conftest_ipa8_conftest.oo eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} return $ac_retval } # ac_fn_c_try_run # ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES # ------------------------------------------------------- # Tests whether HEADER exists and can be compiled using the include files in # INCLUDES, setting the cache variable VAR accordingly. ac_fn_c_check_header_compile () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 #include <$2> _ACEOF if ac_fn_c_try_compile "$LINENO"; then : eval "$3=yes" else eval "$3=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_header_compile # ac_fn_c_check_type LINENO TYPE VAR INCLUDES # ------------------------------------------- # Tests whether TYPE exists after having included INCLUDES, setting cache # variable VAR accordingly. ac_fn_c_check_type () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 $as_echo_n "checking for $2... " >&6; } if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else eval "$3=no" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof ($2)) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { if (sizeof (($2))) return 0; ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else eval "$3=yes" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi eval ac_res=\$$3 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} } # ac_fn_c_check_type # ac_fn_c_compute_int LINENO EXPR VAR INCLUDES # -------------------------------------------- # Tries to find the compile-time value of EXPR in a program that includes # INCLUDES, setting VAR accordingly. Returns whether the value could be # computed ac_fn_c_compute_int () { as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { static int test_array [1 - 2 * !(($2) >= 0)]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_lo=0 ac_mid=0 while :; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { static int test_array [1 - 2 * !(($2) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_hi=$ac_mid; break else as_fn_arith $ac_mid + 1 && ac_lo=$as_val if test $ac_lo -le $ac_mid; then ac_lo= ac_hi= break fi as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { static int test_array [1 - 2 * !(($2) < 0)]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_hi=-1 ac_mid=-1 while :; do cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { static int test_array [1 - 2 * !(($2) >= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_lo=$ac_mid; break else as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val if test $ac_mid -le $ac_hi; then ac_lo= ac_hi= break fi as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done else ac_lo= ac_hi= fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 int main () { static int test_array [1 - 2 * !(($2) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_hi=$ac_mid else as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in #(( ?*) eval "$3=\$ac_lo"; ac_retval=0 ;; '') ac_retval=1 ;; esac else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $4 static long int longval () { return $2; } static unsigned long int ulongval () { return $2; } #include #include int main () { FILE *f = fopen ("conftest.val", "w"); if (! f) return 1; if (($2) < 0) { long int i = longval (); if (i != ($2)) return 1; fprintf (f, "%ld", i); } else { unsigned long int i = ulongval (); if (i != ($2)) return 1; fprintf (f, "%lu", i); } /* Do not output a trailing newline, as this causes \r\n confusion on some platforms. */ return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : echo >>conftest.val; read $3 config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by $as_me, which was generated by GNU Autoconf 2.64. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done { ac_configure_args0=; unset ac_configure_args0;} { ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h $as_echo "/* confdefs.h */" > confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_URL "$PACKAGE_URL" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test -r "$ac_site_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi ## -------------------- ## ## Main body of script. ## ## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version='1.11' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do for ac_t in install-sh install.sh shtool; do if test -f "$ac_dir/$ac_t"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/$ac_t -c" break 2 fi done done if test -z "$ac_aux_dir"; then as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in #(( ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Reject unsafe characters in $srcdir or the absolute working directory # name. Accept space and tab only in the latter. am_lf=' ' case `pwd` in *[\\\"\#\$\&\'\`$am_lf]*) as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; esac case $srcdir in *[\\\"\#\$\&\'\`$am_lf\ \ ]*) as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; esac # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t "$srcdir/configure" conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". as_fn_error "ls -t appears to fail. Make sure there is not a broken alias in your environment" "$LINENO" 5 fi test "$2" = conftest.file ) then # Ok. : else as_fn_error "newly created file is older than distributed files! Check your system clock" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` if test x"${MISSING+set}" != xset; then case $am_aux_dir in *\ * | *\ *) MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) MISSING="\${SHELL} $am_aux_dir/missing" ;; esac fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if test x"${install_sh}" != xset; then case $am_aux_dir in *\ * | *\ *) install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) install_sh="\${SHELL} $am_aux_dir/install-sh" esac fi # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=t1utils VERSION=1.37 cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_config_headers="$ac_config_headers config.h" { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= MAINTAINER_MODE_FALSE='#' else MAINTAINER_MODE_TRUE='#' MAINTAINER_MODE_FALSE= fi MAINT=$MAINTAINER_MODE_TRUE ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "no acceptable C compiler found in \$PATH See \`config.log' for more details." "$LINENO" 5; } # Provide some information about the compiler. $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 for ac_option in --version -v -V -qversion; do { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? if test -s conftest.err; then sed '10a\ ... rest of stderr output deleted ... 10q' conftest.err >conftest.er1 cat conftest.er1 >&5 rm -f conftest.er1 conftest.err fi $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; } done cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include int main () { FILE *f = fopen ("conftest.out", "w"); return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } if test -z "$ac_file"; then : $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { as_fn_set_status 77 as_fn_error "C compiler cannot create executables See \`config.log' for more details." "$LINENO" 5; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { { case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." "$LINENO" 5; } fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest$ac_cv_exeext { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" $as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "cannot compute suffix of object files: cannot compile See \`config.log' for more details." "$LINENO" 5; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else CFLAGS="" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : else ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac if test "x$ac_cv_prog_cc_c89" != xno; then : fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # Ignore all kinds of additional output from `make'. case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=include am__quote= _am_result=GNU ;; esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf case `$am_make -s -f confmf 2> /dev/null` in #( *the\ am__doit\ target*) am__include=.include am__quote="\"" _am_result=BSD ;; esac fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi am__universal=false case " $depcc " in #( *\ -arch\ *\ -arch\ *) am__universal=true ;; esac for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. Also, some Intel # versions had trouble with output in subdirs am__obj=sub/conftest.${OBJEXT-o} am__minus_obj="-o $am__obj" case $depmode in gcc) # This depmode causes a compiler race in universal mode. test "$am__universal" = false || continue ;; nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; msvisualcpp | msvcmsys) # This compiler won't grok `-c -o', but also, the minuso test has # not run yet. These depmodes are late enough in the game, and # so weak that their functioning should not be impacted. am__obj=conftest.${OBJEXT-o} am__minus_obj= ;; none) break ;; esac if depmode=$depmode \ source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } if test "${ac_cv_c_const+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { /* FIXME: Include the comments suggested by Paul. */ #ifndef __cplusplus /* Ultrix mips cc rejects this. */ typedef int charset[2]; const charset cs; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; /* NEC SVR4.0.2 mips cc rejects this. */ struct point {int x, y;}; static struct point const zero = {0,0}; /* AIX XL C 1.02.0.0 rejects this. It does not let you subtract one const X* pointer from another in an arm of an if-expression whose if-part is not a constant expression */ const char *g = "string"; pcpcc = &g + (g ? g-g : 0); /* HPUX 7.0 cc rejects these. */ ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; { /* SCO 3.2v4 cc rejects this. */ char *t; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; if (s) return 0; } { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ int x[] = {25, 17}; const int *foo = &x[0]; ++foo; } { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ typedef const int *iptr; iptr p = 0; ++p; } { /* AIX XL C 1.02.0.0 rejects this saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ struct s { int j; const int *ap[3]; }; struct s *b; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; if (!foo) return 0; } return !cs[0] && !zero.x; #endif ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else ac_cv_c_const=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then $as_echo "#define const /**/" >>confdefs.h fi # Check whether --enable-warnings was given. if test "${enable_warnings+set}" = set; then : enableval=$enable_warnings; if test "$enableval" = yes ; then CFLAGS="$CFLAGS -W -Wall" fi fi for ac_func in strerror do : ac_fn_c_check_func "$LINENO" "strerror" "ac_cv_func_strerror" if test "x$ac_cv_func_strerror" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRERROR 1 _ACEOF else case " $LIBOBJS " in *" $ac_func.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;; esac fi done ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then : $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : else # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if ac_fn_c_try_cpp "$LINENO"; then : # Broken: success on invalid input. continue else # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} as_fn_error "C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." "$LINENO" 5; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : : else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF if ac_fn_c_try_run "$LINENO"; then : else ac_cv_header_stdc=no fi rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ conftest.$ac_objext conftest.beam conftest.$ac_ext fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then $as_echo "#define STDC_HEADERS 1" >>confdefs.h fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do : as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default " eval as_val=\$$as_ac_Header if test "x$as_val" = x""yes; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in inttypes.h do : ac_fn_c_check_header_mongrel "$LINENO" "inttypes.h" "ac_cv_header_inttypes_h" "$ac_includes_default" if test "x$ac_cv_header_inttypes_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_INTTYPES_H 1 _ACEOF have_inttypes_h=yes else have_inttypes_h=no fi done for ac_header in sys/types.h do : ac_fn_c_check_header_mongrel "$LINENO" "sys/types.h" "ac_cv_header_sys_types_h" "$ac_includes_default" if test "x$ac_cv_header_sys_types_h" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_SYS_TYPES_H 1 _ACEOF have_sys_types_h=yes else have_sys_types_h=no fi done if test $have_inttypes_h = no -a $have_sys_types_h = yes; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uintXX_t typedefs" >&5 $as_echo_n "checking for uintXX_t typedefs... " >&6; } if test "${ac_cv_uint_t+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "(^|[^a-zA-Z_0-9])uint32_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then : ac_cv_uint_t=yes else ac_cv_uint_t=no fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_uint_t" >&5 $as_echo "$ac_cv_uint_t" >&6; } fi if test $have_inttypes_h = no -a $have_sys_types_h = yes -a "$ac_cv_uint_t" = no; then { $as_echo "$as_me:${as_lineno-$LINENO}: checking for u_intXX_t typedefs" >&5 $as_echo_n "checking for u_intXX_t typedefs... " >&6; } if test "${ac_cv_u_int_t+set}" = set; then : $as_echo_n "(cached) " >&6 else cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "(^|[^a-zA-Z_0-9])u_int32_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then : ac_cv_u_int_t=yes else ac_cv_u_int_t=no fi rm -f conftest* fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_u_int_t" >&5 $as_echo "$ac_cv_u_int_t" >&6; } fi if test $have_inttypes_h = yes -o "$ac_cv_uint_t" = yes; then : elif test "$ac_cv_u_int_t" = yes; then $as_echo "#define HAVE_U_INT_TYPES 1" >>confdefs.h else { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ========================================= Neither uint32_t nor u_int32_t defined by or ! Assuming \"short\" has 16 bits and \"int\" has 32 bits. =========================================" >&5 $as_echo "$as_me: WARNING: ========================================= Neither uint32_t nor u_int32_t defined by or ! Assuming \"short\" has 16 bits and \"int\" has 32 bits. =========================================" >&2;} $as_echo "#define HAVE_FAKE_INT_TYPES 1" >>confdefs.h fi ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "#if HAVE_INTTYPES_H # include #endif #if HAVE_SYS_TYPES_H # include #endif " if test "x$ac_cv_type_uintptr_t" = x""yes; then : cat >>confdefs.h <<_ACEOF #define HAVE_UINTPTR_T 1 _ACEOF fi # The cast to long int works around a bug in the HP C Compiler # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. # This bug is HP SR number 8606223364. { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of void *" >&5 $as_echo_n "checking size of void *... " >&6; } if test "${ac_cv_sizeof_void_p+set}" = set; then : $as_echo_n "(cached) " >&6 else if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (void *))" "ac_cv_sizeof_void_p" "$ac_includes_default"; then : else if test "$ac_cv_type_void_p" = yes; then { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { as_fn_set_status 77 as_fn_error "cannot compute sizeof (void *) See \`config.log' for more details." "$LINENO" 5; }; } else ac_cv_sizeof_void_p=0 fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_void_p" >&5 $as_echo "$ac_cv_sizeof_void_p" >&6; } cat >>confdefs.h <<_ACEOF #define SIZEOF_VOID_P $ac_cv_sizeof_void_p _ACEOF # The cast to long int works around a bug in the HP C Compiler # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. # This bug is HP SR number 8606223364. { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned long" >&5 $as_echo_n "checking size of unsigned long... " >&6; } if test "${ac_cv_sizeof_unsigned_long+set}" = set; then : $as_echo_n "(cached) " >&6 else if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned long))" "ac_cv_sizeof_unsigned_long" "$ac_includes_default"; then : else if test "$ac_cv_type_unsigned_long" = yes; then { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { as_fn_set_status 77 as_fn_error "cannot compute sizeof (unsigned long) See \`config.log' for more details." "$LINENO" 5; }; } else ac_cv_sizeof_unsigned_long=0 fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned_long" >&5 $as_echo "$ac_cv_sizeof_unsigned_long" >&6; } cat >>confdefs.h <<_ACEOF #define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long _ACEOF # The cast to long int works around a bug in the HP C Compiler # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. # This bug is HP SR number 8606223364. { $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned int" >&5 $as_echo_n "checking size of unsigned int... " >&6; } if test "${ac_cv_sizeof_unsigned_int+set}" = set; then : $as_echo_n "(cached) " >&6 else if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned int))" "ac_cv_sizeof_unsigned_int" "$ac_includes_default"; then : else if test "$ac_cv_type_unsigned_int" = yes; then { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;} { as_fn_set_status 77 as_fn_error "cannot compute sizeof (unsigned int) See \`config.log' for more details." "$LINENO" 5; }; } else ac_cv_sizeof_unsigned_int=0 fi fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned_int" >&5 $as_echo "$ac_cv_sizeof_unsigned_int" >&6; } cat >>confdefs.h <<_ACEOF #define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int _ACEOF # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 { $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if test "${ac_cv_build+set}" = set; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) as_fn_error "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if test "${ac_cv_host+set}" = set; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) as_fn_error "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac # Check whether --enable-multiplatform was given. if test "${enable_multiplatform+set}" = set; then : enableval=$enable_multiplatform; fi if test "x$enable_multiplatform" = xyes; then test "x$bindir" = 'x${exec_prefix}/bin' && bindir="$bindir/$host" test "x$libdir" = 'x${exec_prefix}/lib' && libdir="$libdir/$host" fi ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes: double-quote # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -n "$EXEEXT"; then am__EXEEXT_TRUE= am__EXEEXT_FALSE='#' else am__EXEEXT_TRUE='#' am__EXEEXT_FALSE= fi if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then as_fn_error "conditional \"MAINTAINER_MODE\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then as_fn_error "conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then as_fn_error "conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} as_write_fail=0 cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} export SHELL _ASEOF cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 ## -------------------- ## ## M4sh Initialization. ## ## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in #( *posix*) : set -o posix ;; #( *) : ;; esac fi as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo # Prefer a ksh shell builtin over an external printf program on Solaris, # but without wasting forks for bash or zsh. if test -z "$BASH_VERSION$ZSH_VERSION" \ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='print -r --' as_echo_n='print -rn --' elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 exit 1 fi # Unset variables that we do not need and which cause bugs (e.g. in # pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" # suppresses any "Segmentation fault" message there. '((' could # trigger a bug in pdksh 5.2.14. for as_var in BASH_ENV ENV MAIL MAILPATH do eval test x\${$as_var+set} = xset \ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # CDPATH. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # as_fn_error ERROR [LINENO LOG_FD] # --------------------------------- # Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are # provided, also output the error to LOG_FD, referencing LINENO. Then exit the # script with status $?, using 1 if that was 0. as_fn_error () { as_status=$?; test $as_status -eq 0 && as_status=1 if test "$3"; then as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 fi $as_echo "$as_me: error: $1" >&2 as_fn_exit $as_status } # as_fn_error # as_fn_set_status STATUS # ----------------------- # Set $? to STATUS, without forking. as_fn_set_status () { return $1 } # as_fn_set_status # as_fn_exit STATUS # ----------------- # Exit the shell with STATUS, even in a "trap 0" or "set -e" context. as_fn_exit () { set +e as_fn_set_status $1 exit $1 } # as_fn_exit # as_fn_unset VAR # --------------- # Portably unset VAR. as_fn_unset () { { eval $1=; unset $1;} } as_unset=as_fn_unset # as_fn_append VAR VALUE # ---------------------- # Append the text in VALUE to the end of the definition contained in VAR. Take # advantage of any shell optimizations that allow amortized linear growth over # repeated appends, instead of the typical quadratic growth present in naive # implementations. if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : eval 'as_fn_append () { eval $1+=\$2 }' else as_fn_append () { eval $1=\$$1\$2 } fi # as_fn_append # as_fn_arith ARG... # ------------------ # Perform arithmetic evaluation on the ARGs, and store the result in the # global $as_val. Take advantage of shells that can avoid forks. The arguments # must be portable across $(()) and expr. if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : eval 'as_fn_arith () { as_val=$(( $* )) }' else as_fn_arith () { as_val=`expr "$@" || test $? -eq 1` } fi # as_fn_arith if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in #((((( -n*) case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. xy) ECHO_C='\c';; *) echo `echo ksh88 bug on AIX 6.1` > /dev/null ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null # as_fn_mkdir_p # ------------- # Create "$as_dir" as a directory, including parents if necessary. as_fn_mkdir_p () { case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || eval $as_mkdir_p || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" } # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in #( -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 ## ----------------------------------- ## ## Main body of $CONFIG_STATUS script. ## ## ----------------------------------- ## _ASEOF test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by $as_me, which was generated by GNU Autoconf 2.64. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac case $ac_config_headers in *" "*) set x $ac_config_headers; shift; ac_config_headers=$*;; esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files and other configuration actions from templates according to the current configuration. Unless the files and actions are specified as TAGs, all are instantiated by default. Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet, --silent do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to the package provider." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ config.status configured by $0, generated by GNU Autoconf 2.64, with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2009 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header as_fn_error "ambiguous option: \`$1' Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) as_fn_error "unrecognized option: \`$1' Try \`$0 --help' for more information." ;; *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=`echo X | tr X '\015'` # On cygwin, bash can eat \r inside `` if the user requested igncr. # But we know of no other shell where ac_cr would be empty at this # point, so we can use a bashism as a fallback. if test "x$ac_cr" = x; then eval ac_cr=\$\'\\r\' fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\).*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\).*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || as_fn_error "could not setup config files machinery" "$LINENO" 5 _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", prefix defundef, macro, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 as_fn_error "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || as_fn_error "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || as_fn_error "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || as_fn_error "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || { # Autoconf 2.62 quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. case $CONFIG_FILES in *\'*) eval set x "$CONFIG_FILES" ;; *) set x $CONFIG_FILES ;; esac shift for mf do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` as_dir=$dirpart/$fdir; as_fn_mkdir_p # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done } ;; esac done # for ac_tag as_fn_exit 0 _ACEOF ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit $? fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi t1utils-1.37/config.h.in0000644000076400007640000000460411602730466012036 00000000000000/* config.h.in. Generated from configure.ac by autoheader. */ #ifndef T1UTILS_CONFIG_H #define T1UTILS_CONFIG_H /* Define if intXX_t types are not available. */ #undef HAVE_FAKE_INT_TYPES /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the `strerror' function. */ #undef HAVE_STRERROR /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if the system has the type `uintptr_t'. */ #undef HAVE_UINTPTR_T /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define if you have u_intXX_t types but not uintXX_t types. */ #undef HAVE_U_INT_TYPES /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the home page for this package. */ #undef PACKAGE_URL /* Define to the version of this package. */ #undef PACKAGE_VERSION /* The size of `unsigned int', as computed by sizeof. */ #undef SIZEOF_UNSIGNED_INT /* The size of `unsigned long', as computed by sizeof. */ #undef SIZEOF_UNSIGNED_LONG /* The size of `void *', as computed by sizeof. */ #undef SIZEOF_VOID_P /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Version number of package */ #undef VERSION /* Define to empty if `const' does not conform to ANSI C. */ #undef const #include #ifdef __cplusplus extern "C" { #endif /* Prototype strerror if we don't have it. */ #if !HAVE_STRERROR char *strerror(int errno); #endif #ifdef __cplusplus } /* Get rid of a possible inline macro under C++. */ # define inline inline #endif #endif /* T1UTILS_CONFIG_H */ t1utils-1.37/t1unmac.c0000644000076400007640000005363011546355025011533 00000000000000/* t1unmac/unpost * * This program converts Macintosh Type 1 fonts stored in MacBinary (I or II), * AppleSingle, AppleDouble, BinHex, or raw resource fork format to PFA and * PFB formats. * * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. * * Permission is hereby granted to use, modify, and distribute this program * for any purpose provided this copyright notice and the one below remain * intact. * * I. Lee Hetherington (ilh@lcs.mit.edu) * * 1.5 and later versions contain changes by, and are maintained by, * Eddie Kohler . * * New change log in `NEWS'. Old change log: * * Revision 1.2 92/06/23 10:57:33 ilh * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) * incoporated. * * Revision 1.1 92/05/22 12:07:49 ilh * initial version * * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS * ... #endif, where _MSDOS is an identifier, which is automatically * defined, if you compile with the Microsoft C/C++ Compiler. * */ /* Note: this is ANSI C. */ #ifdef HAVE_CONFIG_H # include #endif #if defined(_MSDOS) || defined(_WIN32) # include # include # include #endif #include #include #include #include #include #include #include #include #include "t1lib.h" #ifdef __cplusplus extern "C" { #endif /* Some functions to read one, two, three, and four byte integers in 68000 byte order (most significant byte first). */ static int read_one(FILE *fi) { return getc(fi); } static int read_two(FILE *fi) { int val; val = getc(fi); val = (val << 8) | getc(fi); return val; } static int32_t read_three(FILE *fi) { int32_t val; val = getc(fi); val = (val << 8) | getc(fi); val = (val << 8) | getc(fi); return val; } static int32_t read_four(FILE *fi) { int32_t val; val = getc(fi); val = (val << 8) | getc(fi); val = (val << 8) | getc(fi); val = (val << 8) | getc(fi); return val; } /* reposition a file with error messages */ static void reposition(FILE *fi, int32_t absolute) { if (fseek(fi, absolute, 0) == -1) fatal_error("can't seek to position %d\n\ (The Mac file may be corrupted, or you may need the `-r' option.)", absolute); } static int blocklen = -1; static int hex_column = 0; /* current column of hex ASCII output */ static void output_hex_byte(FILE *fo, int b) { static const char *hex = "0123456789abcdef"; if (hex_column >= blocklen) { putc('\n', fo); hex_column = 0; } putc(hex[b >> 4], fo); putc(hex[b & 0xf], fo); hex_column += 2; } /* Function to extract a particular POST resource. Offset points to the four byte length which is followed by the data. The first byte of the POST data specifies resource type: 1 for ASCII, 2 for binary, and 5 for end. The second byte is always zero. */ /* Function to write four byte length to PFB file: least significant byte first. */ static int extract_data(FILE *fi, FILE *fo, struct pfb_writer *w, int32_t offset, int pfb) { enum PS_type { PS_ascii = 1, PS_binary = 2, PS_end = 5 }; static int last_type = -1; static int skip_newline = 0; int32_t len; int more = 1; int i, c; reposition(fi, offset); len = read_four(fi) - 2; /* subtract type field */ switch ((enum PS_type)read_one(fi)) { case PS_ascii: { (void) read_one(fi); if (last_type != PFB_ASCII && pfb) { pfb_writer_output_block(w); w->blocktyp = PFB_ASCII; } for (i = 0; i < len; i++) { c = read_one(fi); if (c == '\n' && skip_newline) { skip_newline = 0; continue; } if (c == '\r') { c = '\n'; skip_newline = 1; } else skip_newline = 0; if (pfb) PFB_OUTPUT_BYTE(w, c); else putc(c, fo); } last_type = PFB_ASCII; break; } case PS_binary: { (void) read_one(fi); if (last_type != PFB_BINARY && pfb) { pfb_writer_output_block(w); w->blocktyp = PFB_BINARY; } else if (last_type != PFB_BINARY) hex_column = 0; if (pfb) { while (len--) PFB_OUTPUT_BYTE(w, read_one(fi)); } else { while (len--) output_hex_byte(fo, read_one(fi)); } last_type = PFB_BINARY; break; } case PS_end: more = 0; break; } return more; } /***** * Command line **/ #define OUTPUT_OPT 301 #define VERSION_OPT 302 #define HELP_OPT 303 #define PFB_OPT 304 #define PFA_OPT 305 #define MACBINARY_OPT 306 #define RAW_OPT 307 #define LINE_LEN_OPT 308 #define APPLEDOUBLE_OPT 309 #define BINHEX_OPT 310 static Clp_Option options[] = { { "applesingle", 0, APPLEDOUBLE_OPT, 0, 0 }, { "appledouble", 0, APPLEDOUBLE_OPT, 0, 0 }, { "binhex", 0, BINHEX_OPT, 0, 0 }, { "block-length", 0, LINE_LEN_OPT, Clp_ValUnsigned, 0 }, { "help", 0, HELP_OPT, 0, 0 }, { "line-length", 'l', LINE_LEN_OPT, Clp_ValUnsigned, 0 }, { "macbinary", 0, MACBINARY_OPT, 0, 0 }, { "output", 'o', OUTPUT_OPT, Clp_ValString, 0 }, { "pfa", 'a', PFA_OPT, 0, 0 }, { "pfb", 'b', PFB_OPT, 0, 0 }, { "raw", 'r', RAW_OPT, 0, 0 }, { "version", 0, VERSION_OPT, 0, 0 }, }; static const char *program_name; void fatal_error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); exit(1); } void error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); } static void short_usage(void) { fprintf(stderr, "Usage: %s [OPTION]... INPUT [OUTPUT]\n\ Try `%s --help' for more information.\n", program_name, program_name); } static void usage(void) { printf("\ `T1unmac' extracts a PostScript Type 1 font from a Macintosh font file. It can\n\ read MacBinary, AppleSingle, AppleDouble, or BinHex files, or raw Macintosh\n\ resource forks. The result is written to the standard output unless an OUTPUT\n\ file is given.\n\ \n\ Usage: %s [OPTION]... INPUT [OUTPUT]\n\ \n\ Options:\n\ -r, --raw Input is a raw Macintosh resource fork.\n\ --macbinary Input is in MacBinary format.\n\ --applesingle Input is in AppleSingle format.\n\ --appledouble Input is in AppleDouble format.\n\ --binhex Input is in BinHex format.\n\ -a, --pfa Output font in ASCII (PFA) format.\n\ -b, --pfb Output font in binary (PFB) format. This is\n\ the default.\n\ -l, --block-length NUM Set max block length for PFB output.\n\ -l, --line-length NUM Set max encrypted line length for PFA output.\n\ -o, --output FILE Write output to FILE.\n\ -h, --help Print this message and exit.\n\ --version Print version number and warranty and exit.\n\ \n\ Report bugs to .\n", program_name); } static const char * check_macbinary(FILE *ifp) { int i, j; char buf[124]; /* check "version" bytes at offsets 0 and 74 */ reposition(ifp, 0); if (read_one(ifp) != 0) return "bad version byte"; reposition(ifp, 74); if (read_one(ifp) != 0) return "bad version byte"; #if 0 /* write out bullshit */ {int t; reposition(ifp, 65); t = read_four(ifp); fprintf(stderr, "Type %c%c%c%c\n", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255); t = read_four(ifp); fprintf(stderr, "Creator %c%c%c%c\n", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255); t = read_one(ifp); fprintf(stderr, "Finder flags 1 %02x\n", t); read_one(ifp); t = read_two(ifp); fprintf(stderr, "horizpos %04x\n", t); t = read_two(ifp); fprintf(stderr, "vertpos %04x\n", t); t = read_two(ifp); fprintf(stderr, "folder id %d\n", t); t = read_one(ifp); fprintf(stderr, "protected? %x\n", t); t = read_one(ifp); t = read_four(ifp); fprintf(stderr, "data len %d\n", t); t = read_four(ifp); fprintf(stderr, "rsrc len %d\n", t); t = read_four(ifp); { struct tm *crap; fprintf(stderr, "creation date %x\n", t); t -= 2082844800; fprintf(stderr, " %s\n", ctime(&t)); t = read_four(ifp); fprintf(stderr, "modification date %x\n", t); t -= 2082844800; fprintf(stderr, " %s\n", ctime(&t)); t = read_two(ifp); } fprintf(stderr, "getinfo len %d\n", t); t = read_one(ifp); fprintf(stderr, "finderflags 2 %02x\n", t); reposition(ifp, 116); t = read_four(ifp); fprintf(stderr, "total len %d\n", t); t = read_two(ifp); fprintf(stderr, "secondary header len %d\n", t); t = read_one(ifp); fprintf(stderr, "version %d\n", t); t = read_one(ifp); fprintf(stderr, "version %d\n", t); } #endif /* check file length */ reposition(ifp, 1); i = read_one(ifp); if (i > 63) return "bad length"; reposition(ifp, 83); i = read_four(ifp); j = read_four(ifp); if (i < 0 || j < 0 || i >= 0x800000 || j >= 0x800000) return "bad length"; /* check CRC */ reposition(ifp, 0); fread(buf, 1, 124, ifp); if (crcbuf(0, 124, buf) != read_two(ifp)) { reposition(ifp, 82); if (read_one(ifp) != 0) return "bad checksum"; } return 0; } #define APPLESINGLE_MAGIC 0x00051600 #define APPLEDOUBLE_MAGIC 0x00051607 static const char * check_appledouble(FILE *ifp) { int i; reposition(ifp, 0); i = read_four(ifp); if (i != APPLEDOUBLE_MAGIC && i != APPLESINGLE_MAGIC) return "bad magic number"; return 0; } static const char * translate_binhex(FILE *f, FILE *tmpf) { int i, c = 0, last_char, after_x90, bits, bitpos; unsigned char value_table[256]; /* prepare value table */ { const char *table = "!\"#$%&'()*+,-012345689@ABCDEFGHIJKLMNPQRSTUVXYZ[`abcdefhijklmpqr"; for (i = 0; i < 256; i++) value_table[i] = 255; for (i = 0; *table; i++, table++) value_table[(unsigned char)*table] = i; } /* skip to comment */ { const char *comment = "(This file must be converted with BinHex"; while (!feof(f)) { const char *s; for (s = comment; *s; s++) { c = getc(f); if (c != *s) break; } /* skip to end of line */ while (c >= 0 && c != '\n' && c != '\r') c = getc(f); /* stop if read comment */ if (!*s) goto found_comment; } /* failed */ return "no comment"; } found_comment: /* skip spaces, look for ':' */ for (c = ' '; isspace(c); c = getc(f)) ; if (c != ':') return "no file-start character"; /* found ':', process until you find another ':' */ last_char = -1; after_x90 = bits = 0; bitpos = 10; for (c = getc(f); c >= 0; c = getc(f)) if (!isspace(c)) { /* add 6 bits to bits */ if (value_table[c] == 255) break; bits |= (value_table[c] << bitpos); bitpos -= 6; /* output character(s) */ if (bitpos <= 2) { int d = bits >> 8; bits = (bits << 8) & 0xFF00; bitpos += 8; if (after_x90) { /* handle compression */ if (d == 0) { last_char = 0x90; putc(0x90, tmpf); } else for (i = 1; i < d; i++) putc(last_char, tmpf); after_x90 = 0; } else if (d == 0x90) after_x90 = 1; else { last_char = d; putc(d, tmpf); } } } if (c < 0) return "unexpected EOF"; else if (c != ':') return "bad character"; fflush(tmpf); return 0; } static int check_binhex_crc(FILE *f, int offset, int length) { int crc = 0; char buf[2048]; reposition(f, offset); while (length > 0) { int n = (length < 2048 ? length : 2048); fread(buf, 1, n, f); crc = crcbuf(crc, n, buf); length -= n; } return crc == 0; } static const char * check_binhex(FILE *f) { int fname_len, data_len, rsrc_len, off; /* check lengths */ reposition(f, 0); fname_len = read_one(f); if (fname_len < 1 || fname_len > 63) return "bad length"; reposition(f, 1 + fname_len + 11); data_len = read_four(f); rsrc_len = read_four(f); if (data_len < 0 || rsrc_len < 0 || data_len >= 0x800000 || rsrc_len >= 0x800000) return "bad length"; /* check version */ reposition(f, 1 + fname_len); if (read_one(f) != 0) return "bad version"; /* check CRC */ off = 1 + fname_len + 21; if (!check_binhex_crc(f, 0, off)) return "bad header CRC"; if (!check_binhex_crc(f, off, data_len + 2)) return "bad data CRC"; if (!check_binhex_crc(f, off + data_len + 2, rsrc_len + 2)) return "bad resource fork CRC"; return 0; } #ifdef __cplusplus } #endif int main(int argc, char *argv[]) { FILE *ifp = 0; FILE *ofp = 0; struct pfb_writer w; const char *ifp_name = ""; int32_t res_offset, res_data_offset, res_map_offset, type_list_offset; int32_t post_type; int num_types, num_extracted = 0, pfb = 1; int raw = 0, appledouble = 0, binhex = 0, macbinary = 0; Clp_Parser *clp = Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); program_name = Clp_ProgramName(clp); /* interpret command line arguments using CLP */ while (1) { int opt = Clp_Next(clp); switch (opt) { case RAW_OPT: raw = 1; appledouble = binhex = macbinary = 0; break; case MACBINARY_OPT: macbinary = 1; raw = appledouble = binhex = 0; break; case APPLEDOUBLE_OPT: appledouble = 1; raw = binhex = macbinary = 0; break; case BINHEX_OPT: binhex = 1; raw = appledouble = macbinary = 0; break; output_file: case OUTPUT_OPT: if (ofp) fatal_error("output file already specified"); if (strcmp(clp->vstr, "-") == 0) ofp = stdout; else { ofp = fopen(clp->vstr, "w"); if (!ofp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case PFB_OPT: pfb = 1; break; case PFA_OPT: pfb = 0; break; case LINE_LEN_OPT: blocklen = clp->val.i; break; case HELP_OPT: usage(); exit(0); break; case VERSION_OPT: printf("t1unmac (LCDF t1utils) %s\n", VERSION); printf("Copyright (C) 1992-2010 I. Lee Hetherington, Eddie Kohler et al.\n\ This is free software; see the source for copying conditions.\n\ There is NO warranty, not even for merchantability or fitness for a\n\ particular purpose.\n"); exit(0); break; case Clp_NotOption: if (ifp && ofp) fatal_error("too many arguments"); else if (ifp) goto output_file; if (strcmp(clp->vstr, "-") == 0) ifp = stdin; else { ifp_name = clp->vstr; ifp = fopen(clp->vstr, "rb"); if (!ifp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case Clp_Done: goto done; case Clp_BadOption: short_usage(); exit(1); break; } } done: if (!ifp) ifp = stdin; if (!ofp) ofp = stdout; #if defined(_MSDOS) || defined(_WIN32) _setmode(_fileno(ifp), _O_BINARY); /* If we are processing a PFB (binary) output */ /* file, we must set its file mode to binary. */ if (pfb) _setmode(_fileno(ofp), _O_BINARY); #endif if (pfb) init_pfb_writer(&w, blocklen, ofp); else { if (blocklen == -1) blocklen = 64; else if (blocklen < 8) { blocklen = 8; error("warning: line length raised to %d", blocklen); } else if (blocklen > 1024) { blocklen = 1024; error("warning: line length lowered to %d", blocklen); } } /* check for non-seekable input */ if (fseek(ifp, 0, 0)) { char buf[2048]; FILE *tmp = tmpfile(); if (!tmp) fatal_error("cannot open temporary file: %s", strerror(errno)); while (!feof(ifp)) { int i = fread(buf, 1, 2048, ifp); if (i > 0) fwrite(buf, 1, i, tmp); } if (ferror(ifp)) fatal_error("%s: %s", ifp_name, strerror(errno)); reposition(tmp, 0); fflush(tmp); if (ifp != stdin) fclose(ifp); ifp = tmp; } /* check for empty file */ fseek(ifp, 0, 2); if (ftell(ifp) == 0) fatal_error("%s: empty file\n\ (Try re-transferring the files using MacBinary format.)", ifp_name); reposition(ifp, 0); if (!raw && !appledouble && !binhex && !macbinary) { /* check magic number, try to figure out what it is */ int i, magic; magic = read_four(ifp); reposition(ifp, 0); if (magic == APPLESINGLE_MAGIC || magic == APPLEDOUBLE_MAGIC) appledouble = 1; else if ((magic & 0xFF000000) == 0) macbinary = 1; else { binhex = 1; for (i = 0; i < 4; i++, magic >>= 8) if (!isprint(magic & 0xFF) && !isspace(magic & 0xFF)) /* not an ASCII character, assume not BinHex */ binhex = 0; } if (!appledouble && !macbinary && !binhex) fatal_error("%s: unknown file type", ifp_name); } if (raw) { /* raw resource file */ res_offset = 0; } else if (macbinary) { /* MacBinary (I or II) file */ const char *check; int32_t data_fork_size; /* check integrity of file */ check = check_macbinary(ifp); if (check) fatal_error("%s: not a MacBinary file (%s)", ifp_name, check); /* read data and resource fork sizes in MacBinary header */ reposition(ifp, 83); data_fork_size = read_four(ifp); (void) read_four(ifp); /* round data_fork_size up to multiple of 128 */ if (data_fork_size % 128) data_fork_size += 128 - data_fork_size % 128; res_offset = 128 + data_fork_size; } else if (appledouble) { /* AppleDouble file */ const char *check; const char *applewhat; int i, n; /* check integrity */ check = check_appledouble(ifp); if (check) fatal_error("%s: not an AppleDouble file (%s)", ifp_name, check); reposition(ifp, 0); if (read_four(ifp) == APPLESINGLE_MAGIC) applewhat = "AppleSingle"; else applewhat = "AppleDouble"; /* find offset to resource and/or data fork */ reposition(ifp, 24); n = read_two(ifp); res_offset = -1; for (i = 0; i < n; i++) { int type = read_four(ifp); if (type == 0) fatal_error("%s: bad %s file (bad entry descriptor)", ifp_name, applewhat); if (type == 2) /* resource fork entry */ res_offset = read_four(ifp); else (void) read_four(ifp); (void) read_four(ifp); } if (res_offset < 0) fatal_error("%s: bad %s file (no resource fork)", ifp_name, applewhat); } else if (binhex) { /* BinHex file */ const char *check; FILE *tmpf = tmpfile(); if (!tmpf) fatal_error("cannot open temporary file: %s", strerror(errno)); /* check integrity */ check = translate_binhex(ifp, tmpf); if (check) fatal_error("%s: not a BinHex file (%s)", ifp_name, check); check = check_binhex(tmpf); if (check) fatal_error("%s: bad BinHex file (%s)", ifp_name, check); /* find resource offset */ reposition(tmpf, 0); res_offset = read_one(tmpf); reposition(tmpf, 1 + res_offset + 11); res_offset += 22 + read_four(tmpf) + 2; if (ifp != stdin) fclose(ifp); ifp = tmpf; } else { fatal_error("%s: strange format", ifp_name); exit(1); } /* read offsets from resource fork header */ reposition(ifp, res_offset); res_data_offset = res_offset + read_four(ifp); res_map_offset = res_offset + read_four(ifp); /* read type list offset from resource map header */ reposition(ifp, res_map_offset + 24); type_list_offset = res_map_offset + read_two(ifp); /* read type list */ reposition(ifp, type_list_offset); num_types = read_two(ifp) + 1; /* find POST type */ post_type = (int32_t)('P' & 0xff) << 24; post_type |= (int32_t)('O' & 0xff) << 16; post_type |= (int32_t)('S' & 0xff) << 8; post_type |= (int32_t)('T' & 0xff); while (num_types--) { if (read_four(ifp) == post_type) { int nrsrc = 1 + read_two(ifp); int list_offset = type_list_offset + read_two(ifp); int rsrc_pos = 0; int want_id = 501; int second_time = 1; reposition(ifp, list_offset); /* read resources sequentially, starting with ID 501, until we encounter an "end" resource or we can't find the next resource */ while (rsrc_pos < nrsrc) { int offset = ftell(ifp); int id = read_two(ifp); if (id == want_id) { (void) read_two(ifp); (void) read_one(ifp); num_extracted++; if (!extract_data(ifp, ofp, &w, res_data_offset + read_three(ifp), pfb)) break; second_time = 0; want_id++; } reposition(ifp, offset + 12); rsrc_pos++; if (rsrc_pos >= nrsrc && !second_time) { reposition(ifp, list_offset); rsrc_pos = 0; } } break; } else { (void) read_two(ifp); (void) read_two(ifp); } } #if 0 system("/bin/rm -f /tmp/x.*"); { FILE *f; int i; reposition(ifp, res_offset + 16); if ((f = fopen("/tmp/x.systemarea", "wb"))) { for (i = res_offset + 16; i < res_data_offset; i++) { putc(getc(ifp), f); } fclose(f); } } reposition(ifp, type_list_offset); num_types = read_two(ifp) + 1; while (num_types--) { int t = read_four(ifp); int num_of_type = 1 + read_two(ifp); int32_t save_offset = ftell(ifp) + 2; reposition(ifp, type_list_offset + read_two(ifp)); while (num_of_type--) { FILE *f; char buf[2048]; int x, i, attrs; x = ftell(ifp); i = read_two(ifp); /* ID */ read_two(ifp); attrs = read_one(ifp); sprintf(buf, "/tmp/x.%c%c%c%c.%d", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255, i); fprintf(stderr, "%c%c%c%c.%d %d", (t>>24)&255, (t>>16)&255, (t>>8)&255, t&255, i, attrs); if ((f = fopen(buf, "wb"))) { int l; reposition(ifp, res_data_offset + read_three(ifp)); l = read_four(ifp); fprintf(stderr, " %d\n", l); while (l > 0) { int n = (l < 2048 ? l : 2048); fread(buf, 1, n, ifp); fwrite(buf, 1, n, f); l -= n; } fclose(f); } reposition(ifp, x + 12); } reposition(ifp, save_offset); } #endif if (pfb) pfb_writer_end(&w); if (num_extracted == 0) error("%s: not a Type 1 font (no POST resources)", ifp_name); fclose(ifp); fclose(ofp); return 0; } t1utils-1.37/depcomp0000755000076400007640000004271311163207451011366 00000000000000#! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2007-03-29.01 # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software # Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: t1utils-1.37/t1asm.10000644000076400007640000000543211602730475011122 00000000000000.ds V 1.37 .de M .BR "\\$1" "(\\$2)\\$3" .. .TH T1ASM 1 "" "Version \*V" .SH NAME t1asm \- assemble PostScript Type 1 font .SH SYNOPSIS .B t1asm \%[\fB\-a\fR|\fB\-b\fR] \%[\fB\-l\fR \fIlength\fR] \%[\fIinput\fR [\fIoutput\fR]] .SH DESCRIPTION .B t1asm assembles Adobe Type 1 font programs into either PFA (hexadecimal) or PFB (binary) formats from a human-readable form. If the file .I output is not specified output goes to the standard output. If the file .I input is not specified input comes from the standard input. .B t1asm tokenizes the charstring data and performs eexec and charstring encryption as specified in the ``black book,'' .I "Adobe Type 1 Font Format." The input must have a line of the form .RS .nf .ft B /-|{string currentfile exch readstring pop}executeonly def .ft R .fi .RE which defines the command, in this case `\-|', that is to start charstring data. It is an error not to define such a command. Another common name for this command is `RD'. After the start of the .B Subrs array in the input, all open braces `{' not in a comment begin a charstring. Such a charstring is terminated by the next non-comment close brace `}'. Within such a charstring, only comments, integers, and valid charstring commands are allowed. Valid charstring command names can be found in .I "Adobe Type 1 Font Format" and other documents describing the newer Type 2 opcodes. The format within a charstring is unimportant as long as integers and commands are separated by at least a one whitespace (space, tab, newline) character. Note that within charstrings, comments are discarded because they cannot be encoded. .SH OPTIONS .TP 5 .BR \-\-pfa ", " \-a Output in PFA (ASCII) format. .TP 5 .BR \-\-pfb ", " \-b Output in PFB (binary) format. This is the default. .TP .BI \-\-block\-length= "num\fR, " \-l " num" PFB only: Set the maximum output block length to .I num. The default length is as large as memory allows. .TP .BI \-\-line\-length= "num\fR, " \-l " num" PFA only: Set the maximum length of encrypted lines in the output to .I num. (These are the lines consisting wholly of hexadecimal digits.) The default is 64. .SH EXAMPLES .LP .nf % t1asm Utopia-Regular.raw > Utopia-Regular.pfb % t1asm -a Utopia-Regular.raw > Utopia-Regular.pfa .fi .SH "SEE ALSO" .LP .M t1disasm 1 , .M t1ascii 1 , .M t1binary 1 , .M t1unmac 1 , .M t1mac 1 .LP .I "Adobe Type 1 Font Format" is available free from Adobe as a PDF file. http://partners.adobe.com/asn/developer/PDFS/TN/T1_SPEC.PDF .LP .I "The Type 2 Charstring Format," also available from Adobe as a PDF file, describes the newer Type 2 operators, which are also used in some multiple-master Type 1 fonts like Adobe Jenson and Kepler. http://partners.adobe.com/asn/developer/PDFS/TN/5177.Type2.pdf ' .SH AUTHORS Lee Hetherington (ilh@lcs.mit.edu) .br Eddie Kohler (ekohler@gmail.com) t1utils-1.37/NEWS0000644000076400007640000002213211602730725010504 00000000000000T1utils NEWS Version 1.37 29.Jun.2011 * t1asm: Use a dynamically allocated buffer to handle huge characters (reported by Werner Lemberg). Version 1.36 29.May.2010 * Several minor cleanups. Version 1.35 22.Oct.2009 * Don't use "getline" as a symbol (reported by Karl Berry and C.M. Connelly). Version 1.34 1.Mar.2008 * Add '--enable-multiplatform' (requested by Karl Berry). Version 1.33 8.Jan.2008 * Several minor cleanups. Version 1.32 23.Feb.2004 * t1disasm: Avoid memory corruption bug (strings passed to eexec_line are not null terminated). Reported by Werner Lemberg. Version 1.31 8.Feb.2004 * All: Support fonts where the eexec-encrypted portion is binary, and the first ciphertext byte is 0. Reported by Werner Lemberg. Version 1.30 6.Jan.2004 * All: Support fonts, such as those in PostScript files printed by acroread, where "currentfile eexec" is not followed by a newline. Version 1.29 6.Oct.2003 * t1disasm: Support odd fonts where a character is defined on the "/CharStrings" line. Reported by Werner Lemberg. Version 1.28 7.Aug.2003 * Address build problems reported by Nelson H.F. Beebe. Version 1.27 26.Mar.2003 * t1ascii: Add optional warning when output lines are longer than 255 characters. Requested by Werner Lemberg . Version 1.26 16.Apr.2002 * t1mac: Fix buglet (C++ comment, and temporary file left behind). Reported by Vladimir Volovich . Version 1.25 3.Jan.2002 * t1asm: Beware extra characters after `currentfile closefile'. Reported by Luc Devroye . Version 1.24 6.Sep.2001 * Fixed compilation bugs on various platforms reported by Nelson H. F. Beebe . Version 1.23 18.Jun.2001 * Fixed Macintosh file bugs: the MacBinary CRC was calculated incorrectly, and extended finder flags were set to random values in BinHex output. Reported, and patch provided, by Tom Kacvinsky . Version 1.22 6.Mar.2001 * Fixed bug on processing PFA fonts with DOS line endings. The symptom was t1binary producing strange/unusable fonts. Problem: the all-zeros line, which signals the end of the font's binary section, was not being recognized because of an extra '\r'. This has been a bug since version 1.13 -- chagrin! Problem reported by Han The Thanh . Version 1.21 9.Feb.2001 * t1ascii, t1asm, t1unmac: Raised minimum PFA line length to 8. The Adobe spec may imply that there cannot be whitespace within the first 8 bytes of an ASCII-encoded eexec section; it's somewhat ambiguous. Reported by Rainer Menzner . Version 1.20 22.Jun.2000 * t1asm: Fixed bug where `t1asm -a' would give a `warning: line length raised to 4' error message. Reported by Tom Kacvinsky . Version 1.19 3.May.2000 * t1mac: Generated Macintosh fonts now use a custom-drawn icon set, rather than Adobe's default. They also have a t1utils-specific creator signature (T1UT), and their file information mentions t1utils. * t1mac: Added the `--filename' option. Version 1.18 2.May.2000 * t1mac: Fixed bug where generated files appeared corrupted to Macintoshes. Reported by Marten Thavenius . Version 1.17 27.Apr.2000 * Added new program, `t1mac', which translates PFA or PFB fonts into Macintosh-style fonts. T1mac can output in MacBinary, AppleSingle, AppleDouble, or BinHex format. Suggested by Marten Thavenius . * t1unmac: Added support for BinHex. * t1unmac: Fixed bugs in manual page and program options. Version 1.16 25.Apr.2000 * t1unmac: Supports AppleSingle and AppleDouble files with the `--applesingle/double' option. Requested by Kent Boortz . Version 1.15 4.Apr.2000 * t1ascii, t1binary, and t1disasm: Fixed bad error message. * t1unmac: Generates PFB fonts by default. Version 1.14 25.Aug.1999 * t1asm: Version 1.13 produced complete crap output. My test cases were too limited to catch this. Found by Rainer Menzner . Version 1.13 2.Aug.1999 * t1disasm: Complete rewrite. It now uses t1lib.c functions; the goal is to handle PFA and PFB fonts consistently. This has been extensively tested, but there may be bugs. * t1disasm, t1asm: Fixed to support fonts with multiple Subrs and CharStrings sections, like some old Oblique fonts. * PFA minimum line length raised to 4. * t1ascii, t1binary, t1disasm: Changes in t1lib.c to support reading binary PFA fonts. Requested by Tom Kacvinsky . Version 1.12 1.Aug.1999 * t1ascii, t1binary, t1asm, t1disasm: Support fonts with whitespace following the "currentfile eexec" line. Embedded fonts in PostScript generated by Acrobat Reader have this property. Reported by Tom Kacvinsky . * t1ascii, t1asm, t1unmac: Use lowercase hex digits instead of uppercase. * t1unmac: Added `--line-length' option for PFA output. Version 1.11 29.May.1999 * Bug fix in t1asm/t1disasm: if a `readhexstring' procedure was defined, we got confused. Reported by Luc Devroye . * t1binary now has a maximum block length of 2^32 - 1. "Feature" requested by Werner Lemberg . * t1ascii and t1binary each accept both PFA and PFB fonts. If you pass an ASCII font (PFA) to t1ascii, it will output it mostly unchanged, and similarly for PFB fonts and t1binary. The `-l' options will still take effect, so you can use `t1ascii -l 60' to shorten the encrypted line lengths of a PFA font. t1ascii also does some newline translation (changes carriage returns to newlines). Version 1.10.1 12.Apr.1999 * t1asm: Fixed bug when `-l' option wasn't provided. Caught by Giuseppe Ghibò . Version 1.10 11.Apr.1999 * t1asm/t1disasm: Provide support for Type1C (Compact Font Format) font files. These fonts have unencrypted character strings, signalled by a negative lenIV value. Suggestion and patch thanks to Tom Kacvinsky . * t1ascii/t1asm: Added `-l/--line-length' option to control maximum encrypted line length. Suggestion thanks to Giuseppe Ghibò . Version 1.9 14.Feb.1999 * t1asm/t1disasm: Be more robust on fonts that don't end in `mark currentfile closefile'. John Vromans provided a font that ended with `mark' on one line and `currentfile closefile' on another; t1asm and t1disasm did not recognize the encrypted section of the font had ended, and generated some garbage. Version 1.8 2.Jan.1999 * Added some more Type 2 commands (flex, flex1, hflex, hflex1) from a revision of the Type 2 spec. (I wouldn't have known about this except for CurveSoft's revised t1utils package, available at http://www.curvesoft.com. These t1utils are more up-to-date than theirs, however.) * t1asm: Fixed one Type 2 command's translation (cntrmask was incorrectly mapped to 18, not 20). Version 1.7.2 11.Dec.1998 * Integrated patches from Jan-Jaap van der Heijden to support building t1utils under 32-bit Windows. Version 1.7.1 5.Dec.1998 * The t1utils package now uses automake. Version 1.7 27.Nov.1998 * t1asm: Should now work with fonts that have no /Subrs sections. Previously, assembling such a font would silently fail; all the character definitions would be mistaken for procedures and t1asm wouldn't translate them. Problem noticed and fix suggested by Tom Kacvinsky . * t1disasm: Removed spurious debugging output and improved warning message about unknown charstring commands. * Changed fgetc/fputc into getc/putc. Version 1.6 27.Sep.1998 * `--help' now prints to stdout, following the GNU Coding Standards. * Makefiles: Added `make uninstall' target, enabled `./configure's program name transformations, made VPATH builds possible. Version 1.5.2 6.Aug.1998 * t1asm/t1disasm: Changed unknown charstring commands at the request of Werner Lemberg and LEE Chun-Yu. An unknown escape in the charstring, like 12 X, is translated to "escape_X" rather than "UNKNOWN_12_X". Version 1.5.1 31.May.1998 * t1unmac did not actually understand the -r and -b options. Fixed. * t1unmac: Added better diagnostics to help you diagnose seeking problems. Version 1.5 5.Mar.1998 * Initial release with Eddie Kohler as maintainer. * All: Updated to the GNU program behavior standards (long options, --help, --version). Banners removed. Added more error messages. * t1binary: Removed fixed limit on line length. * t1binary: Supports Macintosh files, whose lines end in `\r'. * t1binary: Supports an odd number of hex digits in a line. * t1asm/t1disasm: Added support for Type 2 commands like `blend' and `add', which also appear in some multiple master fonts like Adobe Jenson. * t1asm/t1disasm: Added support for unknown charstring commands. t1disasm translates an unknown command #X to "UNKNOWN_X", and t1asm does the reverse. * t1asm/t1unmac: Changed default output to PFB. * t1unmac: Used to be called `unpost'. `t1unmac' is a much better name. t1utils-1.37/install-sh0000755000076400007640000003246411163207451012017 00000000000000#!/bin/sh # install - install a program, script, or datafile scriptversion=2006-12-25.00 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then trap '(exit $?); exit' 1 2 13 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names starting with `-'. case $src in -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # Protect names starting with `-'. case $dst in -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writeable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; -*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test -z "$d" && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: t1utils-1.37/t1ascii.c0000644000076400007640000001610711546355025011516 00000000000000/* t1ascii * * This program takes an Adobe Type-1 font program in binary (PFB) format and * converts it to ASCII (PFA) format. * * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. * * Permission is hereby granted to use, modify, and distribute this program * for any purpose provided this copyright notice and the one below remain * intact. * * I. Lee Hetherington (ilh@lcs.mit.edu) * * 1.5 and later versions contain changes by, and are maintained by, * Eddie Kohler . * * New change log in `NEWS'. Old change log: * * Revision 1.2 92/06/23 10:58:43 ilh * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) * incoporated. * * Revision 1.1 92/05/22 11:47:24 ilh * initial version * * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS * ... #endif, where _MSDOS is an identifier, which is automatically * defined, if you compile with the Microsoft C/C++ Compiler. * */ /* Note: this is ANSI C. */ #ifdef HAVE_CONFIG_H # include #endif #if defined(_MSDOS) || defined(_WIN32) # include # include #endif #include #include #include #include #include #include #include #include #include "t1lib.h" #ifdef __cplusplus extern "C" { #endif static FILE *ofp; static int line_length = 64; /***** * Command line **/ #define OUTPUT_OPT 301 #define VERSION_OPT 302 #define HELP_OPT 303 #define LINE_LEN_OPT 304 #define WARNINGS_OPT 305 static Clp_Option options[] = { { "help", 0, HELP_OPT, 0, 0 }, { "line-length", 'l', LINE_LEN_OPT, Clp_ValInt, 0 }, { "output", 'o', OUTPUT_OPT, Clp_ValString, 0 }, { "version", 0, VERSION_OPT, 0, 0 }, { "warnings", 'w', WARNINGS_OPT, 0, Clp_Negate } }; static const char *program_name; static const char *ifp_filename = ""; static int line_length_warning = -1; void fatal_error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); exit(1); } void error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); } static void short_usage(void) { fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ Try `%s --help' for more information.\n", program_name, program_name); } static void usage(void) { printf("\ `T1ascii' translates a PostScript Type 1 font from compact binary (PFB) to\n\ ASCII (PFA) format. The result is written to the standard output unless an\n\ OUTPUT file is given.\n\ \n\ Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ \n\ Options:\n\ -l, --line-length=NUM Set max encrypted line length (default 64).\n\ -o, --output=FILE Write output to FILE.\n\ -w, --warnings Warn on too-long lines.\n\ -h, --help Print this message and exit.\n\ --version Print version number and warranty and exit.\n\ \n\ Report bugs to .\n", program_name); } /***** * PFA font_reader functions **/ static int hexcol = 0; static void pfa_output_ascii(char *data, int len) { if (hexcol) { putc('\n', ofp); hexcol = 0; } if (line_length_warning == 0 && len > 256) { line_length_warning = 1; fprintf(stderr, "%s: warning: %s has lines longer than 255 characters\n%s: (This may cause problems with older printers.)\n", program_name, ifp_filename, program_name); } fputs(data, ofp); if (len && data[len - 1] != '\n') { int p = len - 2; while (p > 0 && data[p] != '\n') p--; hexcol = (p ? len - p - 1 : hexcol + len); } } static void pfa_output_binary(unsigned char *data, int len) { static const char *hexchar = "0123456789abcdef"; for (; len > 0; len--, data++) { /* trim hexadecimal lines to line_length columns */ if (hexcol >= line_length) { putc('\n', ofp); hexcol = 0; } putc(hexchar[(*data >> 4) & 0xf], ofp); putc(hexchar[*data & 0xf], ofp); hexcol += 2; } } static void pfa_output_end(void) { } #ifdef __cplusplus } #endif /***** * main() **/ int main(int argc, char *argv[]) { struct font_reader fr; int c; FILE *ifp = 0; Clp_Parser *clp = Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); program_name = Clp_ProgramName(clp); /* interpret command line arguments using CLP */ while (1) { int opt = Clp_Next(clp); switch (opt) { case LINE_LEN_OPT: line_length = clp->val.i; if (line_length < 8) { line_length = 8; error("warning: line length raised to %d", line_length); } else if (line_length > 1024) { line_length = 1024; error("warning: line length lowered to %d", line_length); } break; output_file: case OUTPUT_OPT: if (ofp) fatal_error("output file already specified"); if (strcmp(clp->vstr, "-") == 0) ofp = stdout; else { ofp = fopen(clp->vstr, "w"); if (!ofp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case WARNINGS_OPT: line_length_warning = (clp->negated ? -1 : 0); break; case HELP_OPT: usage(); exit(0); break; case VERSION_OPT: printf("t1ascii (LCDF t1utils) %s\n", VERSION); printf("Copyright (C) 1992-2010 I. Lee Hetherington, Eddie Kohler et al.\n\ This is free software; see the source for copying conditions.\n\ There is NO warranty, not even for merchantability or fitness for a\n\ particular purpose.\n"); exit(0); break; case Clp_NotOption: if (ifp && ofp) fatal_error("too many arguments"); else if (ifp) goto output_file; if (strcmp(clp->vstr, "-") == 0) { ifp_filename = ""; ifp = stdin; } else { ifp_filename = clp->vstr; ifp = fopen(clp->vstr, "rb"); if (!ifp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case Clp_Done: goto done; case Clp_BadOption: short_usage(); exit(1); break; } } done: if (!ifp) ifp = stdin; if (!ofp) ofp = stdout; if (line_length > 255 && line_length_warning == 0) fprintf(stderr, "%s: warning: selected --line-length is greater than 255\n", program_name); #if defined(_MSDOS) || defined(_WIN32) /* As we are processing a PFB (binary) input */ /* file, we must set its file mode to binary. */ _setmode(_fileno(ifp), _O_BINARY); #endif /* prepare font reader */ fr.output_ascii = pfa_output_ascii; fr.output_binary = pfa_output_binary; fr.output_end = pfa_output_end; /* peek at first byte to see if it is the PFB marker 0x80 */ c = getc(ifp); ungetc(c, ifp); /* do the file */ if (c == PFB_MARKER) process_pfb(ifp, ifp_filename, &fr); else if (c == '%') process_pfa(ifp, ifp_filename, &fr); else fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); fclose(ifp); fclose(ofp); return 0; } t1utils-1.37/include/0000755000076400007640000000000011602731036011504 500000000000000t1utils-1.37/include/lcdf/0000755000076400007640000000000011602731036012414 500000000000000t1utils-1.37/include/lcdf/clp.h0000644000076400007640000002407511546355024013301 00000000000000/* -*- related-file-name: "../../liblcdf/clp.c" -*- */ #ifndef LCDF_CLP_H #define LCDF_CLP_H #ifdef __cplusplus extern "C" { #endif /* clp.h - Public interface to CLP. * This file is part of CLP, the command line parser package. * * Copyright (c) 1997-2011 Eddie Kohler, ekohler@gmail.com * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, subject to the conditions * listed in the Click LICENSE file, which is available in full at * http://www.pdos.lcs.mit.edu/click/license.html. The conditions include: you * must preserve this copyright notice, and you cannot mention the copyright * holders in advertising related to the Software without their permission. * The Software is provided WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED. This * notice is a summary of the Click LICENSE file; the license in that file is * legally binding. */ typedef struct Clp_Option Clp_Option; typedef struct Clp_Parser Clp_Parser; typedef struct Clp_ParserState Clp_ParserState; /** @brief Option description. * * CLP users declare arrays of Clp_Option structures to specify what options * should be parsed. * @sa Clp_NewParser, Clp_SetOptions */ struct Clp_Option { const char *long_name; /**< Name of long option, or NULL if the option has no long name. */ int short_name; /**< Character defining short option, or 0 if the option has no short name. */ int option_id; /**< User-specified ID defining option, returned by Clp_Next. */ int val_type; /**< ID of option's value type, or 0 if option takes no value. */ int flags; /**< Option parsing flags. */ }; /** @name Value types * These values describe the type of an option's argument and are used in * the Clp_Option val_type field. For example, if an option took integers, its * Clp_Option structure would have val_type set to Clp_ValInt. */ /**@{*/ #define Clp_NoVal 0 /**< @brief Option takes no value. */ #define Clp_ValString 1 /**< @brief Option value is an arbitrary string. */ #define Clp_ValStringNotOption 2 /**< @brief Option value is a non-option string. See Clp_DisallowOptions. */ #define Clp_ValBool 3 /**< @brief Option value is a boolean. Accepts "true", "false", "yes", "no", "1", and "0", or any prefixes thereof. The match is case-insensitive. */ #define Clp_ValInt 4 /**< @brief Option value is a signed int. Accepts an optional "+" or "-" sign, followed by one or more digits. The digits may be include a "0x" or "0X" prefix, for a hexidecimal number, or a "0" prefix, for an octal number; otherwise it is decimal. */ #define Clp_ValUnsigned 5 /**< @brief Option value is an unsigned int. Accepts an optional "+" sign, followed by one or more digits. The digits may be include a "0x" or "0X" prefix, for a hexidecimal number, or a "0" prefix, for an octal number; otherwise it is decimal. */ #define Clp_ValDouble 6 /**< @brief Option value is a double. Accepts a real number as defined by strtod(). */ #define Clp_ValFirstUser 10 /**< @brief Value types >= Clp_ValFirstUser are available for user types. */ /**@}*/ /** @name Option flags * These flags are used in the Clp_Option flags field. */ /**@{*/ #define Clp_Mandatory (1<<0) /**< @brief Option flag: value is mandatory. It is an error if the option has no value. This is the default if an option has arg_type != 0 and the Clp_Optional flag is not provided. */ #define Clp_Optional (1<<1) /**< @brief Option flag: value is optional. */ #define Clp_Negate (1<<2) /**< @brief Option flag: option may be negated. --no-[long_name] will be accepted in argument lists. */ #define Clp_OnlyNegated (1<<3) /**< @brief Option flag: option must be negated. --no-[long_name] will be accepted in argument lists, but --[long_name] will not. This is the default if long_name begins with "no-". */ #define Clp_PreferredMatch (1<<4) /**< @brief Option flag: prefer this option when matching. Prefixes of --[long_name] should map to this option, even if other options begin with --[long_name]. */ /**@}*/ /** @name Option character types * These flags are used in to define character types in Clp_SetOptionChar(). */ /**@{*/ /* Clp_NotOption 0 */ #define Clp_Short (1<<0) /**< @brief Option character begins a set of short options. */ #define Clp_Long (1<<1) /**< @brief Option character begins a long option. */ #define Clp_ShortNegated (1<<2) /**< @brief Option character begins a set of negated short options. */ #define Clp_LongNegated (1<<3) /**< @brief Option character begins a negated long option. */ #define Clp_LongImplicit (1<<4) /**< @brief Option character can begin a long option, and is part of that long option. */ /**@}*/ #define Clp_NotOption 0 /**< @brief Clp_Next value: argument was not an option. */ #define Clp_Done -1 /**< @brief Clp_Next value: there are no more arguments. */ #define Clp_BadOption -2 /**< @brief Clp_Next value: argument was an erroneous option. */ #define Clp_Error -3 /**< @brief Clp_Next value: internal CLP error. */ #define Clp_ValSize 40 /**< @brief Minimum size of the Clp_Parser val.cs field. */ #define Clp_ValIntSize 10 /**< @brief Minimum size of the Clp_Parser val.is field. */ /** @brief A value parsing function. * @param clp the parser * @param vstr the value to be parsed * @param complain if nonzero, report error messages via Clp_OptionError * @param user_data user data passed to Clp_AddType() * @return 1 if parsing succeeded, 0 otherwise */ typedef int (*Clp_ValParseFunc)(Clp_Parser *clp, const char *vstr, int complain, void *user_data); /** @brief A function for reporting option errors. * @param clp the parser * @param message error message */ typedef void (*Clp_ErrorHandler)(Clp_Parser *clp, const char *message); /** @brief Command line parser. * * A Clp_Parser object defines an instance of CLP, including allowed options, * value types, and current arguments. * @sa Clp_NewParser, Clp_SetOptions, Clp_SetArguments */ struct Clp_Parser { int negated; /**< Whether the last option was negated. */ int have_val; /**< Whether the last option had a value. */ const char *vstr; /**< The string value provided with the last option. */ union { int i; unsigned u; double d; const char *s; void *pv; #ifdef HAVE_INT64_TYPES int64_t i64; uint64_t u64; #endif char cs[Clp_ValSize]; unsigned char ucs[Clp_ValSize]; int is[Clp_ValIntSize]; unsigned us[Clp_ValIntSize]; } val; /**< The parsed value provided with the last option. */ void *user_data; /**< Uninterpreted by CLP; users can set arbitrarily. */ struct Clp_Internal *internal; }; /** @cond never */ #if __GNUC__ >= 4 # define CLP_SENTINEL __attribute__((sentinel)) #else # define CLP_SENTINEL /* nothing */ #endif /** @endcond never */ /** @brief Create a new Clp_Parser. */ Clp_Parser *Clp_NewParser(int argc, const char * const *argv, int nopt, const Clp_Option *opt); /** @brief Destroy a Clp_Parser object. */ void Clp_DeleteParser(Clp_Parser *clp); /** @brief Return @a clp's program name. */ const char *Clp_ProgramName(Clp_Parser *clp); /** @brief Set @a clp's program name. */ const char *Clp_SetProgramName(Clp_Parser *clp, const char *name); /** @brief Set @a clp's error handler function. */ Clp_ErrorHandler Clp_SetErrorHandler(Clp_Parser *clp, Clp_ErrorHandler errh); /** @brief Set @a clp's UTF-8 mode. */ int Clp_SetUTF8(Clp_Parser *clp, int utf8); /** @brief Return @a clp's treatment of character @a c. */ int Clp_OptionChar(Clp_Parser *clp, int c); /** @brief Set @a clp's treatment of character @a c. */ int Clp_SetOptionChar(Clp_Parser *clp, int c, int type); /** @brief Set @a clp's option definitions. */ int Clp_SetOptions(Clp_Parser *clp, int nopt, const Clp_Option *opt); /** @brief Set @a clp's arguments. */ void Clp_SetArguments(Clp_Parser *clp, int argc, const char * const *argv); /** @brief Set whether @a clp is searching for options. */ int Clp_SetOptionProcessing(Clp_Parser *clp, int on); #define Clp_DisallowOptions (1<<0) /**< @brief Value type flag: value can't be an option string. See Clp_AddType(). */ /** @brief Define a new value type for @a clp. */ int Clp_AddType(Clp_Parser *clp, int val_type, int flags, Clp_ValParseFunc parser, void *user_data); #define Clp_AllowNumbers (1<<0) /**< @brief String list flag: allow explicit numbers. See Clp_AddStringListType() and Clp_AddStringListTypeVec(). */ /** @brief Define a new string list value type for @a clp. */ int Clp_AddStringListTypeVec(Clp_Parser *clp, int val_type, int flags, int nstrs, const char * const *strs, const int *vals); /** @brief Define a new string list value type for @a clp. */ int Clp_AddStringListType(Clp_Parser *clp, int val_type, int flags, ...) CLP_SENTINEL; /** @brief Parse and return the next argument from @a clp. */ int Clp_Next(Clp_Parser *clp); /** @brief Return the next argument from @a clp without option parsing. */ const char *Clp_Shift(Clp_Parser *clp, int allow_options); /** @brief Create a new Clp_ParserState. */ Clp_ParserState *Clp_NewParserState(void); /** @brief Destroy a Clp_ParserState object. */ void Clp_DeleteParserState(Clp_ParserState *state); /** @brief Save @a clp's current state in @a state. */ void Clp_SaveParser(const Clp_Parser *clp, Clp_ParserState *state); /** @brief Restore parser state from @a state into @a clp. */ void Clp_RestoreParser(Clp_Parser *clp, const Clp_ParserState *state); /** @brief Report a parser error. */ int Clp_OptionError(Clp_Parser *clp, const char *format, ...); /** @brief Extract the current option as a string. */ int Clp_CurOptionNameBuf(Clp_Parser *clp, char *buf, int len); /** @brief Extract the current option as a string. */ const char *Clp_CurOptionName(Clp_Parser *clp); #undef CLP_SENTINEL #ifdef __cplusplus } #endif #endif t1utils-1.37/include/lcdf/inttypes.h0000644000076400007640000000144111520327655014373 00000000000000#ifndef LCDF_INTTYPES_H #define LCDF_INTTYPES_H /* Define known-width integer types. */ #ifdef HAVE_INTTYPES_H # include #elif defined(HAVE_SYS_TYPES_H) # include # ifdef HAVE_U_INT_TYPES typedef u_int8_t uint8_t; typedef u_int16_t uint16_t; typedef u_int32_t uint32_t; # endif #endif #ifdef HAVE_FAKE_INT_TYPES typedef signed char int8_t; typedef unsigned char uint8_t; typedef signed short int16_t; typedef unsigned short uint16_t; typedef signed int int32_t; typedef unsigned int uint32_t; #endif #ifndef HAVE_UINTPTR_T # if SIZEOF_VOID_P == SIZEOF_UNSIGNED_INT typedef unsigned int uintptr_t; # elif SIZEOF_VOID_P == SIZEOF_UNSIGNED_LONG typedef unsigned long uintptr_t; # endif #endif /* Note: Windows compilers call these types '[un]signed __int8', etc. */ #endif t1utils-1.37/t1mac.10000644000076400007640000000355311602730475011104 00000000000000.ds V 1.37 .de M .BR "\\$1" "(\\$2)\\$3" .. .TH T1MAC 1 "" "Version \*V" .SH NAME t1mac \- translate a PFA or PFB PostScript Type 1 font into Macintosh format .SH SYNOPSIS .B t1mac \%[\fB\-\-macbinary\fR | \fB\-\-applesingle\fR | \fB\-\-appledouble\fR | \fB\-\-binhex\fR | \fB\-\-raw\fR] \%[\fB\-\-filename\fR \fIname\fR] \%[\fIinput\fR [\fIoutput\fR]] .SH DESCRIPTION .B t1mac reads a PFA (hexadecimal) or PFB (binary) PostScript Type 1 font file and generates an equivalent Macintosh Type 1 font file. The output file can be in MacBinary II, AppleSingle, AppleDouble, or BinHex format, or it can be a raw resource fork. The default is MacBinary II; use an option to choose a different format. If the .I output file is not specified output goes to the standard output. .PP WARNING: The output of .B t1mac is not sufficient to use the font, since Macintoshes can't read raw Type 1 fonts. You will need to create a font suitcase containing bitmap fonts if you do not have such a suitcase for the font already. .B t1mac cannot help you do this. .SH OPTIONS .TP 5 .BR \-\-raw ", " \-r Indicates that output should be a raw resource fork. .TP 5 .BR \-\-macbinary Indicates that output should be in MacBinary I or II format. This is the default. .TP 5 .BR \-\-applesingle Indicates that output should be in AppleSingle format. .TP 5 .BR \-\-appledouble Indicates that output should be in AppleDouble format. .TP 5 .BR \-\-binhex Indicates that output should be in BinHex 4.0 format. .TP 5 .BR \-\-filename "=\fIname\fR, " \-n " \fIname\fR" Sets the Macintosh filename of the output font to \fIname\fR. The default is to construct the filename from the font's name using established Macintosh conventions. This option is not useful when output is a raw resource fork. .SH "SEE ALSO" .LP .M t1unmac 1 , .M t1ascii 1 , .M t1binary 1 , .M t1asm 1 , .M t1disasm 1 .SH AUTHORS Eddie Kohler (ekohler@gmail.com) t1utils-1.37/t1binary.c0000644000076400007640000001442311546355025011711 00000000000000/* t1binary * * This program takes an Adobe Type-1 font program in ASCII (PFA) format and * converts it to binary (PFB) format. * * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. * * Permission is hereby granted to use, modify, and distribute this program * for any purpose provided this copyright notice and the one below remain * intact. * * I. Lee Hetherington (ilh@lcs.mit.edu) * * 1.5 and later versions contain changes by, and are maintained by, * Eddie Kohler . * * New change log in `NEWS'. Old change log: * * Revision 1.2 92/06/23 10:58:08 ilh * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) * incoporated. * * Revision 1.1 92/05/22 11:58:17 ilh * initial version * * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS * ... #endif, where _MSDOS is an identifier, which is automatically * defined, if you compile with the Microsoft C/C++ Compiler. * */ /* Note: this is ANSI C. */ #ifdef HAVE_CONFIG_H # include #endif #if defined(_MSDOS) || defined(_WIN32) # include # include #endif #include #include #include #include #include #include #include #include #include "t1lib.h" #ifdef __cplusplus extern "C" { #endif typedef unsigned char byte; /* for PFB block buffering */ static struct pfb_writer w; /* PFB font_reader functions */ static void pfb_output_ascii(char *s, int len) { if (w.blocktyp == PFB_BINARY) { pfb_writer_output_block(&w); w.blocktyp = PFB_ASCII; } for (; len > 0; len--, s++) PFB_OUTPUT_BYTE(&w, (byte)*s); } static void pfb_output_binary(unsigned char *s, int len) { if (w.blocktyp == PFB_ASCII) { pfb_writer_output_block(&w); w.blocktyp = PFB_BINARY; } for (; len > 0; len--, s++) PFB_OUTPUT_BYTE(&w, *s); } static void pfb_output_end(void) { pfb_writer_end(&w); } /***** * Command line **/ #define BLOCK_LEN_OPT 300 #define OUTPUT_OPT 301 #define VERSION_OPT 302 #define HELP_OPT 303 static Clp_Option options[] = { { "block-length", 'l', BLOCK_LEN_OPT, Clp_ValInt, 0 }, { "help", 0, HELP_OPT, 0, 0 }, { "length", 0, BLOCK_LEN_OPT, Clp_ValInt, 0 }, { "output", 'o', OUTPUT_OPT, Clp_ValString, 0 }, { "version", 0, VERSION_OPT, 0, 0 }, }; static const char *program_name; void fatal_error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); exit(1); } void error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); putc('\n', stderr); } static void short_usage(void) { fprintf(stderr, "Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ Try `%s --help' for more information.\n", program_name, program_name); } static void usage(void) { printf("\ `T1binary' translates a PostScript Type 1 font from ASCII (PFA) to compact\n\ binary (PFB) format. The result is written to the standard output unless an\n\ OUTPUT file is given.\n\ \n\ Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ \n\ Options:\n\ -l, --block-length=NUM Set max output block length.\n\ -o, --output=FILE Write output to FILE.\n\ -h, --help Print this message and exit.\n\ --version Print version number and warranty and exit.\n\ \n\ Report bugs to .\n", program_name); } #ifdef __cplusplus } #endif int main(int argc, char *argv[]) { int c; FILE *ifp = 0, *ofp = 0; const char *ifp_filename = ""; struct font_reader fr; int max_blocklen = -1; Clp_Parser *clp = Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); program_name = Clp_ProgramName(clp); /* interpret command line arguments using CLP */ while (1) { int opt = Clp_Next(clp); switch (opt) { case BLOCK_LEN_OPT: max_blocklen = clp->val.i; if (max_blocklen <= 0) { max_blocklen = 1; error("warning: block length raised to %d", max_blocklen); } break; output_file: case OUTPUT_OPT: if (ofp) fatal_error("output file already specified"); if (strcmp(clp->vstr, "-") == 0) ofp = stdout; else { ofp = fopen(clp->vstr, "wb"); if (!ofp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case HELP_OPT: usage(); exit(0); break; case VERSION_OPT: printf("t1binary (LCDF t1utils) %s\n", VERSION); printf("Copyright (C) 1992-2010 I. Lee Hetherington, Eddie Kohler et al.\n\ This is free software; see the source for copying conditions.\n\ There is NO warranty, not even for merchantability or fitness for a\n\ particular purpose.\n"); exit(0); break; case Clp_NotOption: if (ifp && ofp) fatal_error("too many arguments"); else if (ifp) goto output_file; if (strcmp(clp->vstr, "-") == 0) ifp = stdin; else { ifp_filename = clp->vstr; ifp = fopen(clp->vstr, "r"); if (!ifp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case Clp_Done: goto done; case Clp_BadOption: short_usage(); exit(1); break; } } done: if (!ifp) ifp = stdin; if (!ofp) ofp = stdout; #if defined(_MSDOS) || defined(_WIN32) /* As we are processing a PFB (binary) output */ /* file, we must set its file mode to binary. */ _setmode(_fileno(ofp), _O_BINARY); #endif /* prepare font reader and pfb writer */ fr.output_ascii = pfb_output_ascii; fr.output_binary = pfb_output_binary; fr.output_end = pfb_output_end; init_pfb_writer(&w, max_blocklen, ofp); /* peek at first byte to see if it is the PFB marker 0x80 */ c = getc(ifp); ungetc(c, ifp); /* do the file */ if (c == PFB_MARKER) process_pfb(ifp, ifp_filename, &fr); else if (c == '%') process_pfa(ifp, ifp_filename, &fr); else fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); fclose(ifp); fclose(ofp); if (!w.binary_blocks_written) fatal_error("no binary blocks written! Are you sure this was a font?"); return 0; } t1utils-1.37/configure.ac0000644000076400007640000000537211602730457012304 00000000000000dnl Process this file with autoconf to produce a configure script. AC_INIT(t1ascii.c) AM_INIT_AUTOMAKE(t1utils, 1.37) AM_CONFIG_HEADER(config.h) AM_MAINTAINER_MODE AC_PROG_CC AC_C_CONST AC_ARG_ENABLE(warnings, [ --enable-warnings compile with -Wall], if test "$enableval" = yes ; then CFLAGS="$CFLAGS -W -Wall" fi) dnl dnl strerror()? dnl AC_REPLACE_FUNCS(strerror) dnl dnl integer types dnl AC_CHECK_HEADERS(inttypes.h, have_inttypes_h=yes, have_inttypes_h=no) AC_CHECK_HEADERS(sys/types.h, have_sys_types_h=yes, have_sys_types_h=no) if test $have_inttypes_h = no -a $have_sys_types_h = yes; then AC_CACHE_CHECK([for uintXX_t typedefs], ac_cv_uint_t, [AC_EGREP_HEADER(dnl changequote(<<,>>)<<(^|[^a-zA-Z_0-9])uint32_t[^a-zA-Z_0-9]>>changequote([,]), sys/types.h, ac_cv_uint_t=yes, ac_cv_uint_t=no)]) fi if test $have_inttypes_h = no -a $have_sys_types_h = yes -a "$ac_cv_uint_t" = no; then AC_CACHE_CHECK([for u_intXX_t typedefs], ac_cv_u_int_t, [AC_EGREP_HEADER(dnl changequote(<<,>>)<<(^|[^a-zA-Z_0-9])u_int32_t[^a-zA-Z_0-9]>>changequote([,]), sys/types.h, ac_cv_u_int_t=yes, ac_cv_u_int_t=no)]) fi if test $have_inttypes_h = yes -o "$ac_cv_uint_t" = yes; then : elif test "$ac_cv_u_int_t" = yes; then AC_DEFINE(HAVE_U_INT_TYPES, 1, [Define if you have u_intXX_t types but not uintXX_t types.]) else AC_MSG_WARN([ ========================================= Neither uint32_t nor u_int32_t defined by or ! Assuming "short" has 16 bits and "int" has 32 bits. =========================================]) AC_DEFINE(HAVE_FAKE_INT_TYPES, 1, [Define if intXX_t types are not available.]) fi AC_CHECK_TYPES(uintptr_t, [], [], [#if HAVE_INTTYPES_H # include #endif #if HAVE_SYS_TYPES_H # include #endif ]) AC_CHECK_SIZEOF(void *) AC_CHECK_SIZEOF(unsigned long) AC_CHECK_SIZEOF(unsigned int) dnl dnl verbatim portions of the header dnl AH_TOP([#ifndef T1UTILS_CONFIG_H #define T1UTILS_CONFIG_H]) AH_BOTTOM([#include #ifdef __cplusplus extern "C" { #endif /* Prototype strerror if we don't have it. */ #if !HAVE_STRERROR char *strerror(int errno); #endif #ifdef __cplusplus } /* Get rid of a possible inline macro under C++. */ # define inline inline #endif #endif /* T1UTILS_CONFIG_H */]) dnl dnl Multiplatform output directories (for teTeX and TeX Live) dnl AC_CANONICAL_HOST AC_ARG_ENABLE([multiplatform], [AS_HELP_STRING([--enable-multiplatform], [put executables into bin/PLATFORM and libraries into lib/PLATFORM])]) if test "x$enable_multiplatform" = xyes; then test "x$bindir" = 'x${exec_prefix}/bin' && bindir="$bindir/$host" test "x$libdir" = 'x${exec_prefix}/lib' && libdir="$libdir/$host" fi dnl dnl Output dnl AC_CONFIG_FILES([Makefile]) AC_OUTPUT t1utils-1.37/strerror.c0000644000076400007640000000071611520327655012042 00000000000000/* Some operating systems don't have strerror. This file provides a definition which David Mazieres assures me works. */ #ifdef HAVE_CONFIG_H # include #endif #ifdef __cplusplus extern "C" { #endif char * strerror(int errno) { extern int sys_nerr; extern char *sys_errlist[]; if (errno < 0 || errno >= sys_nerr) return (char *)"bad error number"; else return sys_errlist[errno]; } #ifdef __cplusplus } #endif t1utils-1.37/INSTALL0000644000076400007640000001644611075500244011044 00000000000000Basic Installation ================== These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.in' is used to create `configure' by a program called `autoconf'. You only need `configure.in' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes awhile. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with the package. 4. Type `make install' to install the programs and any data files and documentation. 5. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is also a `make maintainer-clean' target, but that is intended mainly for the package's developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. For packages that use the X Window System, `configure' can usually find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are building compiler tools for cross-compiling, you can also use the `--target=TYPE' option to select the type of system they will produce code for and the `--build=TYPE' option to select the type of system on which you are compiling the package. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. t1utils-1.37/config.sub0000755000076400007640000010115311163207451011766 00000000000000#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 # Free Software Foundation, Inc. timestamp='2008-01-16' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA # 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit ;; --version | -v ) echo "$version" ; exit ;; --help | --h* | -h ) echo "$usage"; exit ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit ;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis | -knuth | -cray) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco6) os=-sco5v6 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | am33_2.0 \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ | bfin \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fido | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k | iq2000 \ | m32c | m32r | m32rle | m68000 | m68k | m88k \ | maxq | mb | microblaze | mcore | mep \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64vr | mips64vrel \ | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mips64vr5900 | mips64vr5900el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64r2 | mipsisa64r2el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | mt \ | msp430 \ | nios | nios2 \ | ns16k | ns32k \ | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | score \ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ | spu | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; ms1) basic_machine=mt-unknown ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* | iq2000-* \ | m32c-* | m32r-* | m32rle-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | maxq-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64vr-* | mips64vrel-* \ | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mips64vr5900-* | mips64vr5900el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64r2-* | mipsisa64r2el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | mmix-* \ | mt-* \ | msp430-* \ | nios-* | nios2-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ | xstormy16-* | xtensa*-* \ | ymp-* \ | z8k-*) ;; # Recognize the basic CPU types without company name, with glob match. xtensa*) basic_machine=$basic_machine-unknown ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; abacus) basic_machine=abacus-unknown ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amd64-*) basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; blackfin) basic_machine=bfin-unknown os=-linux ;; blackfin-*) basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; c90) basic_machine=c90-cray os=-unicos ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; craynv) basic_machine=craynv-cray os=-unicosmp ;; cr16) basic_machine=cr16-unknown os=-elf ;; crds | unos) basic_machine=m68k-crds ;; crisv32 | crisv32-* | etraxfs*) basic_machine=crisv32-axis ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; crx) basic_machine=crx-unknown os=-elf ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; djgpp) basic_machine=i586-pc os=-msdosdjgpp ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; mingw32ce) basic_machine=arm-unknown os=-mingw32ce ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; ms1-*) basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; openrisc | openrisc-*) basic_machine=or32-unknown ;; os400) basic_machine=powerpc-ibm os=-os400 ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; parisc) basic_machine=hppa-unknown os=-linux ;; parisc-*) basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` os=-linux ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pc98) basic_machine=i386-pc ;; pc98-*) basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rdos) basic_machine=i386-pc os=-rdos ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sde) basic_machine=mipsisa32-sde os=-elf ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh5el) basic_machine=sh5le-unknown ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tile*) basic_machine=tile-unknown os=-linux-gnu ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; tpf) basic_machine=s390x-ibm os=-tpf ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xbox) basic_machine=i686-pc os=-mingw32 ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; mmix) basic_machine=mmix-knuth ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ | -openbsd* | -solidbsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -os400*) os=-os400 ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -syllable*) os=-syllable ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -tpf*) os=-tpf ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -zvmoe) os=-zvmoe ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in score-*) os=-elf ;; spu-*) os=-elf ;; *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mep-*) os=-elf ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-haiku) os=-haiku ;; *-ibm) os=-aix ;; *-knuth) os=-mmixware ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -os400*) vendor=ibm ;; -ptx*) vendor=sequent ;; -tpf*) vendor=ibm ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: t1utils-1.37/t1disasm.c0000644000076400007640000005056011546355025011707 00000000000000/* t1disasm * * This program `disassembles' Adobe Type-1 font programs in either PFB or PFA * format. It produces a human readable/editable pseudo-PostScript file by * performing eexec and charstring decryption as specified in the `Adobe Type 1 * Font Format' version 1.1 (the `black book'). There is a companion program, * t1asm, which `assembles' such a pseudo-PostScript file into either PFB or * PFA format. * * Copyright (c) 1992 by I. Lee Hetherington, all rights reserved. * * Permission is hereby granted to use, modify, and distribute this program * for any purpose provided this copyright notice and the one below remain * intact. * * I. Lee Hetherington (ilh@lcs.mit.edu) * * 1.5 and later versions contain changes by, and are maintained by, * Eddie Kohler . * * New change log in `NEWS'. Old change log: * * Revision 1.4 92/07/10 10:55:08 ilh * Added support for additional PostScript after the closefile command * (ie., some fonts have {restore}if' after the cleartomark). Also, * removed hardwired charstring start command (-| or RD) in favor of * automatically determining it. * * Revision 1.3 92/06/23 10:57:53 ilh * MSDOS porting by Kai-Uwe Herbing (herbing@netmbx.netmbx.de) * incoporated. * * Revision 1.2 92/05/22 12:05:33 ilh * Fixed bug where we were counting on sprintf to return its first * argument---not true in ANSI C. This bug was detected by Piet * Tutelaers (rcpt@urc.tue.nl). Also, fixed (signed) integer overflow * error when testing high-order bit of integer for possible * sign-extension by making comparison between unsigned integers. * * Revision 1.1 92/05/22 12:04:07 ilh * initial version * * Ported to Microsoft C/C++ Compiler and MS-DOS operating system by * Kai-Uwe Herbing (herbing@netmbx.netmbx.de) on June 12, 1992. Code * specific to the MS-DOS version is encapsulated with #ifdef _MSDOS * ... #endif, where _MSDOS is an identifier, which is automatically * defined, if you compile with the Microsoft C/C++ Compiler. * */ /* Note: this is ANSI C. */ #ifdef HAVE_CONFIG_H # include #endif #if defined(_MSDOS) || defined(_WIN32) # include # include #endif #include #include #include #include #include #include #include #include #include "t1lib.h" #ifdef __cplusplus extern "C" { #endif typedef unsigned char byte; static FILE *ofp; static int lenIV = 4; static char cs_start[10]; static int unknown = 0; /* decryption stuff */ static uint16_t c1 = 52845, c2 = 22719; static uint16_t cr_default = 4330; static uint16_t er_default = 55665; static int error_count = 0; /* If the line contains an entry of the form `/lenIV ' then set the global lenIV to . This indicates the number of random bytes at the beginning of each charstring. */ static void set_lenIV(char *line) { char *p = strstr(line, "/lenIV "); /* Allow lenIV to be negative. Thanks to Tom Kacvinsky */ if (p && (isdigit(p[7]) || p[7] == '+' || p[7] == '-')) { lenIV = atoi(p + 7); } } static void set_cs_start(char *line) { char *p, *q, *r; if ((p = strstr(line, "string currentfile"))) { /* enforce presence of `readstring' -- 5/29/99 */ if (!strstr(line, "readstring")) return; /* locate the name of the charstring start command */ *p = '\0'; /* damage line[] */ q = strrchr(line, '/'); if (q) { r = cs_start; ++q; while (!isspace(*q) && *q != '{') *r++ = *q++; *r = '\0'; } *p = 's'; /* repair line[] */ } } /* Subroutine to output strings. */ static void output(const char *string) { fprintf(ofp, "%s", string); } /* Subroutine to neatly format output of charstring tokens. If token = "\n", then a newline is output. If at start of line (start == 1), prefix token with tab, otherwise a space. */ static void output_token(const char *token) { static int start = 1; if (strcmp(token, "\n") == 0) { fprintf(ofp, "\n"); start = 1; } else { fprintf(ofp, "%s%s", start ? "\t" : " ", token); start = 0; } } /* Subroutine to decrypt and ASCII-ify tokens in charstring data. The charstring decryption machinery is fired up, skipping the first lenIV bytes, and the decrypted tokens are expanded into human-readable form. */ static void decrypt_charstring(unsigned char *line, int len) { int i; int32_t val; char buf[20]; /* decrypt charstring */ if (lenIV >= 0) { /* only decrypt if lenIV >= 0 -- negative lenIV means unencrypted charstring. Thanks to Tom Kacvinsky */ uint16_t cr = cr_default; byte plain; for (i = 0; i < len; i++) { byte cipher = line[i]; plain = (byte)(cipher ^ (cr >> 8)); cr = (uint16_t)((cipher + cr) * c1 + c2); line[i] = plain; } line += lenIV; len -= lenIV; } /* handle each charstring command */ for (i = 0; i < len; i++) { byte b = line[i]; if (b >= 32) { if (b >= 32 && b <= 246) val = b - 139; else if (b >= 247 && b <= 250) { i++; val = (b - 247)*256 + 108 + line[i]; } else if (b >= 251 && b <= 254) { i++; val = -(b - 251)*256 - 108 - line[i]; } else { val = (line[i+1] & 0xff) << 24; val |= (line[i+2] & 0xff) << 16; val |= (line[i+3] & 0xff) << 8; val |= (line[i+4] & 0xff) << 0; /* in case an int32 is larger than four bytes---sign extend */ #if INT_MAX > 0x7FFFFFFFUL if (val & 0x80000000) val |= ~0x7FFFFFFF; #endif i += 4; } sprintf(buf, "%d", val); output_token(buf); } else { switch (b) { case 0: output_token("error"); break; /* special */ case 1: output_token("hstem"); break; case 3: output_token("vstem"); break; case 4: output_token("vmoveto"); break; case 5: output_token("rlineto"); break; case 6: output_token("hlineto"); break; case 7: output_token("vlineto"); break; case 8: output_token("rrcurveto"); break; case 9: output_token("closepath"); break; /* Type 1 ONLY */ case 10: output_token("callsubr"); break; case 11: output_token("return"); break; case 13: output_token("hsbw"); break; /* Type 1 ONLY */ case 14: output_token("endchar"); break; case 16: output_token("blend"); break; /* Type 2 */ case 18: output_token("hstemhm"); break; /* Type 2 */ case 19: output_token("hintmask"); break; /* Type 2 */ case 20: output_token("cntrmask"); break; /* Type 2 */ case 21: output_token("rmoveto"); break; case 22: output_token("hmoveto"); break; case 23: output_token("vstemhm"); break; /* Type 2 */ case 24: output_token("rcurveline"); break; /* Type 2 */ case 25: output_token("rlinecurve"); break; /* Type 2 */ case 26: output_token("vvcurveto"); break; /* Type 2 */ case 27: output_token("hhcurveto"); break; /* Type 2 */ case 28: { /* Type 2 */ /* short integer */ val = (line[i+1] & 0xff) << 8; val |= (line[i+2] & 0xff); i += 2; if (val & 0x8000) val |= ~0x7FFF; sprintf(buf, "%d", val); output_token(buf); } case 29: output_token("callgsubr"); break; /* Type 2 */ case 30: output_token("vhcurveto"); break; case 31: output_token("hvcurveto"); break; case 12: i++; b = line[i]; switch (b) { case 0: output_token("dotsection"); break; /* Type 1 ONLY */ case 1: output_token("vstem3"); break; /* Type 1 ONLY */ case 2: output_token("hstem3"); break; /* Type 1 ONLY */ case 3: output_token("and"); break; /* Type 2 */ case 4: output_token("or"); break; /* Type 2 */ case 5: output_token("not"); break; /* Type 2 */ case 6: output_token("seac"); break; /* Type 1 ONLY */ case 7: output_token("sbw"); break; /* Type 1 ONLY */ case 8: output_token("store"); break; /* Type 2 */ case 9: output_token("abs"); break; /* Type 2 */ case 10: output_token("add"); break; /* Type 2 */ case 11: output_token("sub"); break; /* Type 2 */ case 12: output_token("div"); break; case 13: output_token("load"); break; /* Type 2 */ case 14: output_token("neg"); break; /* Type 2 */ case 15: output_token("eq"); break; /* Type 2 */ case 16: output_token("callothersubr"); break; /* Type 1 ONLY */ case 17: output_token("pop"); break; /* Type 1 ONLY */ case 18: output_token("drop"); break; /* Type 2 */ case 20: output_token("put"); break; /* Type 2 */ case 21: output_token("get"); break; /* Type 2 */ case 22: output_token("ifelse"); break; /* Type 2 */ case 23: output_token("random"); break; /* Type 2 */ case 24: output_token("mul"); break; /* Type 2 */ case 26: output_token("sqrt"); break; /* Type 2 */ case 27: output_token("dup"); break; /* Type 2 */ case 28: output_token("exch"); break; /* Type 2 */ case 29: output_token("index"); break; /* Type 2 */ case 30: output_token("roll"); break; /* Type 2 */ case 33: output_token("setcurrentpoint"); break;/* Type 1 ONLY */ case 34: output_token("hflex"); break; /* Type 2 */ case 35: output_token("flex"); break; /* Type 2 */ case 36: output_token("hflex1"); break; /* Type 2 */ case 37: output_token("flex1"); break; /* Type 2 */ default: sprintf(buf, "escape_%d", b); unknown++; output_token(buf); break; } break; default: sprintf(buf, "UNKNOWN_%d", b); unknown++; output_token(buf); break; } output_token("\n"); } } if (i > len) { output("\terror\n"); error("disassembly error: charstring too short"); } } /* Disassembly font_reader functions */ static int in_eexec = 0; static unsigned char *save = 0; static int save_len = 0; static int save_cap = 0; static void append_save(const unsigned char *line, int len) { if (save_len + len >= save_cap) { unsigned char *new_save; if (!save_cap) save_cap = 1024; while (save_len + len >= save_cap) save_cap *= 2; new_save = (unsigned char *)malloc(save_cap); if (!new_save) fatal_error("out of memory"); memcpy(new_save, save, save_len); free(save); save = new_save; } memcpy(save + save_len, line, len); save_len += len; } /* 23.Feb.2004 - use 'memstr', not strstr, because the strings input to eexec_line aren't null terminated! Reported by Werner Lemberg. */ static const unsigned char * oog_memstr(const unsigned char *line, int line_len, const char *pattern, int pattern_len) { const unsigned char *try; const unsigned char *last = line + line_len - pattern_len + 1; while (line < last && (try = memchr(line, (unsigned char)*pattern, last - line))) { if (memcmp(try, pattern, pattern_len) == 0) return try; else line = try + 1; } return 0; } /* returns 1 if next \n should be deleted */ static int eexec_line(unsigned char *line, int line_len) { int cs_start_len = strlen(cs_start); int pos; int first_space; int digits; int cut_newline = 0; /* append this data to the end of `save' if necessary */ if (save_len) { append_save(line, line_len); line = save; line_len = save_len; } if (!line_len) return 0; /* Look for charstring start */ /* skip first word */ for (pos = 0; pos < line_len && isspace(line[pos]); pos++) ; while (pos < line_len && !isspace(line[pos])) pos++; if (pos >= line_len) goto not_charstring; /* skip spaces */ first_space = pos; while (pos < line_len && isspace(line[pos])) pos++; if (pos >= line_len || !isdigit(line[pos])) goto not_charstring; /* skip number */ digits = pos; while (pos < line_len && isdigit(line[pos])) pos++; /* check for subr (another number) */ if (pos < line_len - 1 && isspace(line[pos]) && isdigit(line[pos+1])) { first_space = pos; digits = pos + 1; for (pos = digits; pos < line_len && isdigit(line[pos]); pos++) ; } /* check for charstring start */ if (pos + 2 + cs_start_len < line_len && pos > digits && line[pos] == ' ' && strncmp((const char *)(line + pos + 1), cs_start, cs_start_len) == 0 && line[pos + 1 + cs_start_len] == ' ') { /* check if charstring is long enough */ int cs_len = atoi((const char *)(line + digits)); if (pos + 2 + cs_start_len + cs_len < line_len) { /* long enough! */ if (line[line_len - 1] == '\r') { line[line_len - 1] = '\n'; cut_newline = 1; } fprintf(ofp, "%.*s {\n", first_space, line); decrypt_charstring(line + pos + 2 + cs_start_len, cs_len); pos += 2 + cs_start_len + cs_len; fprintf(ofp, "\t}%.*s", line_len - pos, line + pos); save_len = 0; return cut_newline; } else { /* not long enough! */ if (line != save) append_save(line, line_len); return 0; } } /* otherwise, just output the line */ not_charstring: /* 6.Oct.2003 - Werner Lemberg reports a stupid Omega font that behaves badly: a charstring definition follows "/Charstrings ... begin", ON THE SAME LINE. */ { const char *CharStrings = (const char *) oog_memstr(line, line_len, "/CharStrings ", 13); int crap, n; char should_be_slash = 0; if (CharStrings && sscanf(CharStrings + 12, " %d dict dup begin %c%n", &crap, &should_be_slash, &n) >= 2 && should_be_slash == '/') { int len = (CharStrings + 12 + n - 1) - (char *) line; fprintf(ofp, "%.*s\n", len, line); return eexec_line((unsigned char *) (CharStrings + 12 + n - 1), line_len - len); } } if (line[line_len - 1] == '\r') { line[line_len - 1] = '\n'; cut_newline = 1; } set_lenIV((char *)line); set_cs_start((char *)line); fprintf(ofp, "%.*s", line_len, line); save_len = 0; /* look for `currentfile closefile' to see if we should stop decrypting */ if (oog_memstr(line, line_len, "currentfile closefile", 21) != 0) in_eexec = -1; return cut_newline; } static int all_zeroes(const char *string) { if (*string != '0') return 0; while (*string == '0') string++; return *string == '\0' || *string == '\n'; } static void disasm_output_ascii(char *line, int len) { int was_in_eexec = in_eexec; (void) len; /* avoid warning */ in_eexec = 0; /* if we came from a binary section, we need to process that too */ if (was_in_eexec > 0) { unsigned char zero = 0; eexec_line(&zero, 0); } /* if we just came from the "ASCII part" of an eexec section, we need to process the saved lines */ if (was_in_eexec < 0) { int i = 0; int save_char = 0; /* note: save[] is unsigned char * */ while (i < save_len) { /* grab a line */ int start = i; while (i < save_len && save[i] != '\r' && save[i] != '\n') i++; if (i < save_len) { if (i < save_len - 1 && save[i] == '\r' && save[i+1] == '\n') save_char = -1; else save_char = save[i+1]; save[i] = '\n'; save[i+1] = 0; } else save[i] = 0; /* output it */ disasm_output_ascii((char *)(save + start), -1); /* repair damage */ if (i < save_len) { if (save_char >= 0) { save[i+1] = save_char; i++; } else i += 2; } } save_len = 0; } if (!all_zeroes(line)) output(line); } /* collect until '\n' or end of binary section */ static void disasm_output_binary(unsigned char *data, int len) { static int ignore_newline; static uint16_t er; byte plain; int i; /* in the ASCII portion of a binary section, just save this data */ if (in_eexec < 0) { append_save(data, len); return; } /* eexec initialization */ if (in_eexec == 0) { er = er_default; ignore_newline = 0; in_eexec = 0; } if (in_eexec < 4) { for (i = 0; i < len && in_eexec < 4; i++, in_eexec++) { byte cipher = data[i]; plain = (byte)(cipher ^ (er >> 8)); er = (uint16_t)((cipher + er) * c1 + c2); data[i] = plain; } data += i; len -= i; } /* now make lines: collect until '\n' or '\r' and pass them off to eexec_line. */ i = 0; while (in_eexec > 0) { int start = i; for (; i < len; i++) { byte cipher = data[i]; plain = (byte)(cipher ^ (er >> 8)); er = (uint16_t)((cipher + er) * c1 + c2); data[i] = plain; if (plain == '\r' || plain == '\n') break; } if (ignore_newline && start < i && data[start] == '\n') { ignore_newline = 0; continue; } if (i >= len) { if (start < len) append_save(data + start, i - start); break; } i++; ignore_newline = eexec_line(data + start, i - start); } /* if in_eexec < 0, we have some plaintext lines sitting around in a binary section of the PFB. save them for later */ if (in_eexec < 0 && i < len) append_save(data + i, len - i); } static void disasm_output_end(void) { /* take care of leftover saved data */ static char crap[1] = ""; disasm_output_ascii(crap, 0); } /***** * Command line **/ #define OUTPUT_OPT 301 #define VERSION_OPT 302 #define HELP_OPT 303 static Clp_Option options[] = { { "help", 0, HELP_OPT, 0, 0 }, { "output", 'o', OUTPUT_OPT, Clp_ValString, 0 }, { "version", 0, VERSION_OPT, 0, 0 }, }; static const char *program_name; void fatal_error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); fputc('\n', stderr); exit(1); } void error(const char *message, ...) { va_list val; va_start(val, message); fprintf(stderr, "%s: ", program_name); vfprintf(stderr, message, val); fputc('\n', stderr); error_count++; } static void short_usage(void) { fprintf(stderr, "Usage: %s [INPUT [OUTPUT]]\n\ Try `%s --help' for more information.\n", program_name, program_name); } static void usage(void) { printf("\ `T1disasm' translates a PostScript Type 1 font in PFB or PFA format into a\n\ human-readable, human-editable form. The result is written to the standard\n\ output unless an OUTPUT file is given.\n\ \n\ Usage: %s [OPTION]... [INPUT [OUTPUT]]\n\ \n\ Options:\n\ -o, --output=FILE Write output to FILE.\n\ -h, --help Print this message and exit.\n\ --version Print version number and warranty and exit.\n\ \n\ Report bugs to .\n", program_name); } #ifdef __cplusplus } #endif int main(int argc, char *argv[]) { struct font_reader fr; int c; FILE *ifp = 0; const char *ifp_filename = ""; Clp_Parser *clp = Clp_NewParser(argc, (const char * const *)argv, sizeof(options) / sizeof(options[0]), options); program_name = Clp_ProgramName(clp); /* interpret command line arguments using CLP */ while (1) { int opt = Clp_Next(clp); switch (opt) { output_file: case OUTPUT_OPT: if (ofp) fatal_error("output file already specified"); if (strcmp(clp->vstr, "-") == 0) ofp = stdout; else { ofp = fopen(clp->vstr, "w"); if (!ofp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case HELP_OPT: usage(); exit(0); break; case VERSION_OPT: printf("t1disasm (LCDF t1utils) %s\n", VERSION); printf("Copyright (C) 1992-2010 I. Lee Hetherington, Eddie Kohler et al.\n\ This is free software; see the source for copying conditions.\n\ There is NO warranty, not even for merchantability or fitness for a\n\ particular purpose.\n"); exit(0); break; case Clp_NotOption: if (ifp && ofp) fatal_error("too many arguments"); else if (ifp) goto output_file; if (strcmp(clp->vstr, "-") == 0) ifp = stdin; else { ifp_filename = clp->vstr; ifp = fopen(clp->vstr, "rb"); if (!ifp) fatal_error("%s: %s", clp->vstr, strerror(errno)); } break; case Clp_Done: goto done; case Clp_BadOption: short_usage(); exit(1); break; } } done: if (!ifp) ifp = stdin; if (!ofp) ofp = stdout; #if defined(_MSDOS) || defined(_WIN32) /* As we might be processing a PFB (binary) input file, we must set its file mode to binary. */ _setmode(_fileno(ifp), _O_BINARY); #endif /* prepare font reader */ fr.output_ascii = disasm_output_ascii; fr.output_binary = disasm_output_binary; fr.output_end = disasm_output_end; /* peek at first byte to see if it is the PFB marker 0x80 */ c = getc(ifp); ungetc(c, ifp); /* do the file */ if (c == PFB_MARKER) process_pfb(ifp, ifp_filename, &fr); else if (c == '%') process_pfa(ifp, ifp_filename, &fr); else fatal_error("%s does not start with font marker (`%%' or 0x80)", ifp_filename); fclose(ifp); fclose(ofp); if (unknown) error((unknown > 1 ? "encountered %d unknown charstring commands" : "encountered %d unknown charstring command"), unknown); return (error_count ? 1 : 0); }