midisport-firmware-1.2+dsfg1/0000755000175000017500000000000010540016064014236 5ustar fabfabmidisport-firmware-1.2+dsfg1/README0000644000175000017500000000214710402650671015127 0ustar fabfab What's this? ------------ This package allows you to use the MidiSport USB MIDI interfaces from M-Audio/Midiman with Linux. It sets up udev rules to automatically load the firmware into the device. Supported devices: - MidiSport 1x1 - MidiSport 2x2 - MidiSport 4x4 - MidiSport 8x8 - MidiSport Uno - Keystation - Oxygen - Radium (You don't need a firmware download for the USB Audio Quattro, Duo, or MidiSport 2x4.) The project page is . Prerequisites ------------- - Linux kernel 2.6.x - udev version 057 or later - fxload (release dated 2002_04_11 or later) (you can get fxload from ) Installing ---------- 1) Run './configure'. 2) Run 'make'. 3) As root, run 'make install'. Uninstalling ------------ As root, run 'make uninstall'. Running ------- The udev rules automatically load the firmware when a MidiSport device is connected to the computer. Contact ------- For help, discussion or feedback, send a mail to the mailing list at . written by Clemens Ladisch midisport-firmware-1.2+dsfg1/configure.ac0000644000175000017500000000341010402650671016527 0ustar fabfab# Process this file with autoconf to produce a configure script AC_PREREQ(2.0) AC_INIT(midisport-firmware, 1.2, [usb-midi-fw-user@lists.sourceforge.net]) AM_INIT_AUTOMAKE($PACKAGE_NAME, $PACKAGE_VERSION) AC_REVISION($Revision$) AC_CONFIG_SRCDIR(MidiSportLoader.ihx) AC_ARG_WITH([fxload], AS_HELP_STRING([--with-fxload=name], [use fxload at the specified location [[/sbin/fxload]]]), [given_fxload="$withval"], [given_fxload=""]) if test -n "$given_fxload"; then AC_MSG_CHECKING([for fxload]) AC_SUBST([FXLOAD], [$given_fxload]) AC_MSG_RESULT([$given_fxload]) else AC_PATH_PROG([FXLOAD], [fxload], [/sbin/fxload], [$PATH:/sbin:/usr/sbin:/usr/local/sbin]) fi if test ! -x "$FXLOAD"; then AC_MSG_ERROR([$FXLOAD not found; please install the fxload package first]) fi AC_MSG_CHECKING([for udev version]) udev_ver=`udevinfo -V | awk '{ print $3 }'` if test -n "$udev_ver"; then AC_MSG_RESULT([$udev_ver]) else AC_MSG_RESULT([none]) udev_ver="0" fi if test "$udev_ver" -lt 057; then AC_MSG_ERROR([udev version 057 or later is required]) fi AC_ARG_WITH([udev], AS_HELP_STRING([--with-udev=dir], [specify udev directory [[/etc/udev]]]), [udev_dir="$withval"], [udev_dir="/etc/udev"]) AC_CHECK_FILE([$udev_dir/udev.conf], [udev_conf="$udev_dir/udev.conf"], [udev_conf=""]) AC_MSG_CHECKING([for udev rules directory]) udev_rules="" if test -r "$udev_conf"; then udev_rules=`. "$udev_conf"; echo "$udev_rules"` fi if test -n "$udev_rules"; then AC_MSG_RESULT([$udev_rules]) else udev_rules="$udev_dir/rules.d" AC_MSG_RESULT([not found; assuming $udev_rules]) fi if test ! -d "$udev_rules"; then AC_MSG_ERROR([$udev_rules not found]) fi AC_SUBST([UDEV_RULES_DIR], [$udev_rules]) AC_CONFIG_FILES(Makefile) AC_OUTPUT midisport-firmware-1.2+dsfg1/aclocal.m40000644000175000017500000005127010402650672016111 0ustar fabfab# generated automatically by aclocal 1.8.5 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # -*- Autoconf -*- # Copyright (C) 2002, 2003 Free Software Foundation, Inc. # Generated from amversion.in; do not edit by hand. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.8.5])]) # AM_AUX_DIR_EXPAND # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # Do all the work for Automake. -*- Autoconf -*- # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 11 # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.58])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"$am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # -*- Autoconf -*- # Copyright (C) 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 1 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # AM_PROG_MKDIR_P # --------------- # Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. # Copyright (C) 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories # created by `make install' are always world readable, even if the # installer happens to have an overly restrictive umask (e.g. 077). # This was a mistake. There are at least two reasons why we must not # use `-m 0755': # - it causes special bits like SGID to be ignored, # - it may be too restrictive (some setups expect 775 directories). # # Do not use -m 0755 and let people choose whatever they expect by # setting umask. # # We cannot accept any implementation of `mkdir' that recognizes `-p'. # Some implementations (such as Solaris 8's) are not thread-safe: if a # parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' # concurrently, both version can detect that a/ is missing, but only # one can create it and the other will error out. Consequently we # restrict ourselves to GNU make (using the --version option ensures # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # Keeping the `.' argument allows $(mkdir_p) to be used without # argument. Indeed, we sometimes output rules like # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more # expensive solution, as it forces Make to start a sub-shell.) mkdir_p='mkdir -p -- .' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi AC_SUBST([mkdir_p])]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 2 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # # Check to make sure that the build environment is sane. # # Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # serial 3 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # AM_PROG_INSTALL_STRIP # Copyright (C) 2001, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) midisport-firmware-1.2+dsfg1/Makefile.am0000644000175000017500000000223710402650671016303 0ustar fabfab## Process this file with automake to generate Makefile.in AUTOMAKE_OPTIONS = foreign udevrulesdir = @UDEV_RULES_DIR@ firmwaredir = $(datadir)/usb/maudio udevrules_DATA = 42-midisport-firmware.rules dist_firmware_DATA = MidiSportLoader.ihx \ MidiSport2x2.ihx \ MidiSport1x1.ihx \ MidiSportKS.ihx \ MidiSport4x4.ihx \ MidiSport8x8-2.10.ihx \ MidiSport8x8-2.21.ihx MOSTLYCLEANFILES = 42-midisport-firmware.rules files.list EXTRA_DIST = 42-midisport-firmware.rules.in LICENSE Changelog $(PACKAGE).spec.in $(PACKAGE).spec all-local: files.list 42-midisport-firmware.rules: Makefile $(srcdir)/42-midisport-firmware.rules.in rm -f $@ $@.tmp sed -e 's,@firmwaredir\@,$(firmwaredir),g' \ -e 's,@fxload\@,$(FXLOAD),g' \ $(srcdir)/42-midisport-firmware.rules.in > $@.tmp mv $@.tmp $@ $(PACKAGE).spec: Makefile $(srcdir)/$(PACKAGE).spec.in rm -f $@ $@.tmp sed -e 's,@version@,$(VERSION),g' \ $(srcdir)/$(PACKAGE).spec.in > $@.tmp mv $@.tmp $@ files.list: Makefile rm -f $@ for i in $(udevrules_DATA); do \ echo "$(udevrulesdir)/$$i"; \ done >> $@ for i in $(dist_firmware_DATA); do \ echo "$(firmwaredir)/$$i"; \ done >> $@ midisport-firmware-1.2+dsfg1/Makefile.in0000644000175000017500000003453310402650674016323 0ustar fabfab# Makefile.in generated by automake 1.8.5 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = . DIST_COMMON = README $(am__configure_deps) $(dist_firmware_DATA) \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/configure install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno mkinstalldirs = $(mkdir_p) CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = am__installdirs = "$(DESTDIR)$(firmwaredir)" "$(DESTDIR)$(udevrulesdir)" dist_firmwareDATA_INSTALL = $(INSTALL_DATA) udevrulesDATA_INSTALL = $(INSTALL_DATA) DATA = $(dist_firmware_DATA) $(udevrules_DATA) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ FXLOAD = @FXLOAD@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ UDEV_RULES_DIR = @UDEV_RULES_DIR@ VERSION = @VERSION@ ac_ct_STRIP = @ac_ct_STRIP@ am__leading_dot = @am__leading_dot@ bindir = @bindir@ build_alias = @build_alias@ datadir = @datadir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ prefix = @prefix@ program_transform_name = @program_transform_name@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ AUTOMAKE_OPTIONS = foreign udevrulesdir = @UDEV_RULES_DIR@ firmwaredir = $(datadir)/usb/maudio udevrules_DATA = 42-midisport-firmware.rules dist_firmware_DATA = MidiSportLoader.ihx \ MidiSport2x2.ihx \ MidiSport1x1.ihx \ MidiSportKS.ihx \ MidiSport4x4.ihx \ MidiSport8x8-2.10.ihx \ MidiSport8x8-2.21.ihx MOSTLYCLEANFILES = 42-midisport-firmware.rules files.list EXTRA_DIST = 42-midisport-firmware.rules.in LICENSE Changelog $(PACKAGE).spec.in $(PACKAGE).spec all: all-am .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ cd $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) uninstall-info-am: install-dist_firmwareDATA: $(dist_firmware_DATA) @$(NORMAL_INSTALL) test -z "$(firmwaredir)" || $(mkdir_p) "$(DESTDIR)$(firmwaredir)" @list='$(dist_firmware_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(dist_firmwareDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(firmwaredir)/$$f'"; \ $(dist_firmwareDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(firmwaredir)/$$f"; \ done uninstall-dist_firmwareDATA: @$(NORMAL_UNINSTALL) @list='$(dist_firmware_DATA)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f '$(DESTDIR)$(firmwaredir)/$$f'"; \ rm -f "$(DESTDIR)$(firmwaredir)/$$f"; \ done install-udevrulesDATA: $(udevrules_DATA) @$(NORMAL_INSTALL) test -z "$(udevrulesdir)" || $(mkdir_p) "$(DESTDIR)$(udevrulesdir)" @list='$(udevrules_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(udevrulesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(udevrulesdir)/$$f'"; \ $(udevrulesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(udevrulesdir)/$$f"; \ done uninstall-udevrulesDATA: @$(NORMAL_UNINSTALL) @list='$(udevrules_DATA)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f '$(DESTDIR)$(udevrulesdir)/$$f'"; \ rm -f "$(DESTDIR)$(udevrulesdir)/$$f"; \ done tags: TAGS TAGS: ctags: CTAGS CTAGS: distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-am all-am: Makefile $(DATA) all-local installdirs: for dir in "$(DESTDIR)$(firmwaredir)" "$(DESTDIR)$(udevrulesdir)"; do \ test -z "$$dir" || $(mkdir_p) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic mostlyclean-am distclean: distclean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-dist_firmwareDATA install-udevrulesDATA install-exec-am: install-info: install-info-am install-man: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-dist_firmwareDATA uninstall-info-am \ uninstall-udevrulesDATA .PHONY: all all-am all-local am--refresh check check-am clean \ clean-generic dist dist-all dist-bzip2 dist-gzip dist-shar \ dist-tarZ dist-zip distcheck distclean distclean-generic \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dist_firmwareDATA install-exec \ install-exec-am install-info install-info-am install-man \ install-strip install-udevrulesDATA installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am uninstall uninstall-am \ uninstall-dist_firmwareDATA uninstall-info-am \ uninstall-udevrulesDATA all-local: files.list 42-midisport-firmware.rules: Makefile $(srcdir)/42-midisport-firmware.rules.in rm -f $@ $@.tmp sed -e 's,@firmwaredir\@,$(firmwaredir),g' \ -e 's,@fxload\@,$(FXLOAD),g' \ $(srcdir)/42-midisport-firmware.rules.in > $@.tmp mv $@.tmp $@ $(PACKAGE).spec: Makefile $(srcdir)/$(PACKAGE).spec.in rm -f $@ $@.tmp sed -e 's,@version@,$(VERSION),g' \ $(srcdir)/$(PACKAGE).spec.in > $@.tmp mv $@.tmp $@ files.list: Makefile rm -f $@ for i in $(udevrules_DATA); do \ echo "$(udevrulesdir)/$$i"; \ done >> $@ for i in $(dist_firmware_DATA); do \ echo "$(firmwaredir)/$$i"; \ done >> $@ # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: midisport-firmware-1.2+dsfg1/configure0000755000175000017500000024451410402650675016170 0ustar fabfab#! /bin/sh # From configure.ac Revision. # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.59 for midisport-firmware 1.2. # # Report bugs to . # # Copyright (C) 2003 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` exec 6>&1 # # Initializations. # ac_default_prefix=/usr/local ac_config_libobj_dir=. cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. # This variable seems obsolete. It should probably be removed, and # only ac_max_sed_lines should be used. : ${ac_max_here_lines=38} # Identity of this package. PACKAGE_NAME='midisport-firmware' PACKAGE_TARNAME='midisport-firmware' PACKAGE_VERSION='1.2' PACKAGE_STRING='midisport-firmware 1.2' PACKAGE_BUGREPORT='usb-midi-fw-user@lists.sourceforge.net' ac_unique_file="MidiSportLoader.ihx" ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot FXLOAD UDEV_RULES_DIR LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. ac_init_help= ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir=$ac_optarg ;; -disable-* | --disable-*) ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid feature name: $ac_feature" >&2 { (exit 1); exit 1; }; } ac_feature=`echo $ac_feature | sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` case $ac_option in *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid package name: $ac_package" >&2 { (exit 1); exit 1; }; } ac_package=`echo $ac_package | sed 's/-/_/g'` eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` eval "$ac_envvar='$ac_optarg'" export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi # Be sure to have absolute paths. for ac_var in exec_prefix prefix do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* | NONE | '' ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # Be sure to have absolute paths. for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ localstatedir libdir includedir oldincludedir infodir mandir do eval ac_val=$`echo $ac_var` case $ac_val in [\\/$]* | ?:[\\/]* ) ;; *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; };; esac done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_confdir=`(dirname "$0") 2>/dev/null || $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$0" : 'X\(//\)[^/]' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$0" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 { (exit 1); exit 1; }; } else { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi fi (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 { (exit 1); exit 1; }; } srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` ac_env_build_alias_set=${build_alias+set} ac_env_build_alias_value=$build_alias ac_cv_env_build_alias_set=${build_alias+set} ac_cv_env_build_alias_value=$build_alias ac_env_host_alias_set=${host_alias+set} ac_env_host_alias_value=$host_alias ac_cv_env_host_alias_set=${host_alias+set} ac_cv_env_host_alias_value=$host_alias ac_env_target_alias_set=${target_alias+set} ac_env_target_alias_value=$target_alias ac_cv_env_target_alias_set=${target_alias+set} ac_cv_env_target_alias_value=$target_alias # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures midisport-firmware 1.2 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] _ACEOF cat <<_ACEOF Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data [PREFIX/share] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --infodir=DIR info documentation [PREFIX/info] --mandir=DIR man documentation [PREFIX/man] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of midisport-firmware 1.2:";; esac cat <<\_ACEOF Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-fxload=name use fxload at the specified location [/sbin/fxload] --with-udev=dir specify udev directory [/etc/udev] Report bugs to . _ACEOF fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. ac_popdir=`pwd` for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d $ac_dir || continue ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac cd $ac_dir # Check for guested configure; otherwise get Cygnus style configure. if test -f $ac_srcdir/configure.gnu; then echo $SHELL $ac_srcdir/configure.gnu --help=recursive elif test -f $ac_srcdir/configure; then echo $SHELL $ac_srcdir/configure --help=recursive elif test -f $ac_srcdir/configure.ac || test -f $ac_srcdir/configure.in; then echo $ac_configure --help else echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi cd $ac_popdir done fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF midisport-firmware configure 1.2 generated by GNU Autoconf 2.59 Copyright (C) 2003 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit 0 fi exec 5>config.log cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by midisport-firmware $as_me 1.2, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ _ACEOF { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` hostinfo = `(hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. echo "PATH: $as_dir" done } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_sep= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" # Get rid of the leading space. ac_sep=" " ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Be sure not to use single quotes in there, as some shells, # such as our DU 5.0 friend, will then `close' the trap. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, { (set) 2>&1 | case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in *ac_space=\ *) sed -n \ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" ;; *) sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------- ## ## Output files. ## ## ------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=$`echo $ac_var` echo "$ac_var='"'"'$ac_val'"'"'" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo sed "/^$/d" confdefs.h | sort echo fi test "$ac_signal" != 0 && echo "$as_me: caught signal $ac_signal" echo "$as_me: exit $exit_status" } >&5 rm -f core *.core && rm -rf conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo >confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { echo "$as_me:$LINENO: loading cache $cache_file" >&5 echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . $cache_file;; *) . ./$cache_file;; esac fi else { echo "$as_me:$LINENO: creating cache $cache_file" >&5 echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in `(set) 2>&1 | sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val="\$ac_cv_env_${ac_var}_value" eval ac_new_val="\$ac_env_${ac_var}_value" case $ac_old_set,$ac_new_set in set,) { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 echo "$as_me: former value: $ac_old_val" >&2;} { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 echo "$as_me: current value: $ac_new_val" >&2;} ac_cache_corrupted=: fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu am__api_version="1.8" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f $ac_dir/shtool; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} { (exit 1); exit 1; }; } fi ac_config_guess="$SHELL $ac_aux_dir/config.guess" ac_config_sub="$SHELL $ac_aux_dir/config.sub" ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi done done ;; esac done fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL=$ac_install_sh fi fi echo "$as_me:$LINENO: result: $INSTALL" >&5 echo "${ECHO_T}$INSTALL" >&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo "$as_me:$LINENO: checking whether build environment is sane" >&5 echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 test "$program_prefix" != NONE && program_transform_name="s,^,$program_prefix,;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$,$program_suffix,;$program_transform_name" # Double any \ or $. echo might interpret backslashes. # By default was `s,x,x', remove it if useless. cat <<\_ACEOF >conftest.sed s/[\\$]/&&/g;s/;s,x,x,$// _ACEOF program_transform_name=`echo $program_transform_name | sed -f conftest.sed` rm conftest.sed # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then # Keeping the `.' argument allows $(mkdir_p) to be used without # argument. Indeed, we sometimes output rules like # $(mkdir_p) $(somedir) # where $(somedir) is conditionally defined. # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more # expensive solution, as it forces Make to start a sub-shell.) mkdir_p='mkdir -p -- .' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as # directories to create, and then abort because `.' already # exists. for d in ./-p ./--version; do test -d $d && rmdir $d done # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. if test -f "$ac_aux_dir/mkinstalldirs"; then mkdir_p='$(mkinstalldirs)' else mkdir_p='$(install_sh) -d' fi fi for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_AWK+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_AWK="$ac_prog" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then echo "$as_me:$LINENO: result: $AWK" >&5 echo "${ECHO_T}$AWK" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi test -n "$AWK" && break done echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else cat >conftest.make <<\_ACEOF all: @echo 'ac_maketemp="$(MAKE)"' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftest.make fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$as_me:$LINENO: result: yes" >&5 echo "${ECHO_T}yes" >&6 SET_MAKE= else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE=$PACKAGE_NAME VERSION=$PACKAGE_VERSION cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} AMTAR=${AMTAR-"${am_missing_run}tar"} install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then echo "$as_me:$LINENO: result: $STRIP" >&5 echo "${ECHO_T}$STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 echo "${ECHO_T}$ac_ct_STRIP" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi STRIP=$ac_ct_STRIP else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Check whether --with-fxload or --without-fxload was given. if test "${with_fxload+set}" = set; then withval="$with_fxload" given_fxload="$withval" else given_fxload="" fi; if test -n "$given_fxload"; then echo "$as_me:$LINENO: checking for fxload" >&5 echo $ECHO_N "checking for fxload... $ECHO_C" >&6 FXLOAD=$given_fxload echo "$as_me:$LINENO: result: $given_fxload" >&5 echo "${ECHO_T}$given_fxload" >&6 else # Extract the first word of "fxload", so it can be a program name with args. set dummy fxload; ac_word=$2 echo "$as_me:$LINENO: checking for $ac_word" >&5 echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 if test "${ac_cv_path_FXLOAD+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6 else case $FXLOAD in [\\/]* | ?:[\\/]*) ac_cv_path_FXLOAD="$FXLOAD" # Let the user override the test with a path. ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR as_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin" for as_dir in $as_dummy do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_FXLOAD="$as_dir/$ac_word$ac_exec_ext" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done test -z "$ac_cv_path_FXLOAD" && ac_cv_path_FXLOAD="/sbin/fxload" ;; esac fi FXLOAD=$ac_cv_path_FXLOAD if test -n "$FXLOAD"; then echo "$as_me:$LINENO: result: $FXLOAD" >&5 echo "${ECHO_T}$FXLOAD" >&6 else echo "$as_me:$LINENO: result: no" >&5 echo "${ECHO_T}no" >&6 fi fi if test ! -x "$FXLOAD"; then { { echo "$as_me:$LINENO: error: $FXLOAD not found; please install the fxload package first" >&5 echo "$as_me: error: $FXLOAD not found; please install the fxload package first" >&2;} { (exit 1); exit 1; }; } fi echo "$as_me:$LINENO: checking for udev version" >&5 echo $ECHO_N "checking for udev version... $ECHO_C" >&6 udev_ver=`udevinfo -V | awk '{ print $3 }'` if test -n "$udev_ver"; then echo "$as_me:$LINENO: result: $udev_ver" >&5 echo "${ECHO_T}$udev_ver" >&6 else echo "$as_me:$LINENO: result: none" >&5 echo "${ECHO_T}none" >&6 udev_ver="0" fi if test "$udev_ver" -lt 057; then { { echo "$as_me:$LINENO: error: udev version 057 or later is required" >&5 echo "$as_me: error: udev version 057 or later is required" >&2;} { (exit 1); exit 1; }; } fi # Check whether --with-udev or --without-udev was given. if test "${with_udev+set}" = set; then withval="$with_udev" udev_dir="$withval" else udev_dir="/etc/udev" fi; as_ac_File=`echo "ac_cv_file_$udev_dir/udev.conf" | $as_tr_sh` echo "$as_me:$LINENO: checking for $udev_dir/udev.conf" >&5 echo $ECHO_N "checking for $udev_dir/udev.conf... $ECHO_C" >&6 if eval "test \"\${$as_ac_File+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6 else test "$cross_compiling" = yes && { { echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5 echo "$as_me: error: cannot check for file existence when cross compiling" >&2;} { (exit 1); exit 1; }; } if test -r "$udev_dir/udev.conf"; then eval "$as_ac_File=yes" else eval "$as_ac_File=no" fi fi echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_File'}'`" >&5 echo "${ECHO_T}`eval echo '${'$as_ac_File'}'`" >&6 if test `eval echo '${'$as_ac_File'}'` = yes; then udev_conf="$udev_dir/udev.conf" else udev_conf="" fi echo "$as_me:$LINENO: checking for udev rules directory" >&5 echo $ECHO_N "checking for udev rules directory... $ECHO_C" >&6 udev_rules="" if test -r "$udev_conf"; then udev_rules=`. "$udev_conf"; echo "$udev_rules"` fi if test -n "$udev_rules"; then echo "$as_me:$LINENO: result: $udev_rules" >&5 echo "${ECHO_T}$udev_rules" >&6 else udev_rules="$udev_dir/rules.d" echo "$as_me:$LINENO: result: not found; assuming $udev_rules" >&5 echo "${ECHO_T}not found; assuming $udev_rules" >&6 fi if test ! -d "$udev_rules"; then { { echo "$as_me:$LINENO: error: $udev_rules not found" >&5 echo "$as_me: error: $udev_rules not found" >&2;} { (exit 1); exit 1; }; } fi UDEV_RULES_DIR=$udev_rules ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. { (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n \ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ;; esac; } | sed ' t clear : clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ : end' >>confcache if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; }' fi # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. # # If the first sed substitution is executed (which looks for macros that # take arguments), then we branch to the quote section. Otherwise, # look for a macro that doesn't take arguments. cat >confdef2opt.sed <<\_ACEOF t clear : clear s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g t quote s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g t quote d : quote s,[ `~#$^&*(){}\\|;'"<>?],\\&,g s,\[,\\&,g s,\],\\&,g s,\$,$$,g p _ACEOF # We use echo to avoid assuming a particular line-breaking character. # The extra dot is to prevent the shell from consuming trailing # line-breaks from the sub-command output. A line-break within # single-quotes doesn't work because, if this script is created in a # platform that uses two characters for line-breaks (e.g., DOS), tr # would break. ac_LF_and_DOT=`echo; echo .` DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` rm -f confdef2opt.sed ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_i=`echo "$ac_i" | sed 's/\$U\././;s/\.o$//;s/\.obj$//'` # 2. Add them. ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by midisport-firmware $as_me 1.2, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 _ACEOF # Files that config.status was made for. if test -n "$ac_config_files"; then echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS fi if test -n "$ac_config_headers"; then echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS fi if test -n "$ac_config_links"; then echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS fi if test -n "$ac_config_commands"; then echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS fi cat >>$CONFIG_STATUS <<\_ACEOF ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE Configuration files: $config_files Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ midisport-firmware config.status 1.2 configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=$srcdir INSTALL="$INSTALL" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ac_shift=: ;; -*) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. ac_option=$1 ac_need_defaults=false;; esac case $ac_option in # Handling of the options. _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF if \$ac_cs_recheck; then echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason to put it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "\$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF s,@SHELL@,$SHELL,;t t s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t s,@exec_prefix@,$exec_prefix,;t t s,@prefix@,$prefix,;t t s,@program_transform_name@,$program_transform_name,;t t s,@bindir@,$bindir,;t t s,@sbindir@,$sbindir,;t t s,@libexecdir@,$libexecdir,;t t s,@datadir@,$datadir,;t t s,@sysconfdir@,$sysconfdir,;t t s,@sharedstatedir@,$sharedstatedir,;t t s,@localstatedir@,$localstatedir,;t t s,@libdir@,$libdir,;t t s,@includedir@,$includedir,;t t s,@oldincludedir@,$oldincludedir,;t t s,@infodir@,$infodir,;t t s,@mandir@,$mandir,;t t s,@build_alias@,$build_alias,;t t s,@host_alias@,$host_alias,;t t s,@target_alias@,$target_alias,;t t s,@DEFS@,$DEFS,;t t s,@ECHO_C@,$ECHO_C,;t t s,@ECHO_N@,$ECHO_N,;t t s,@ECHO_T@,$ECHO_T,;t t s,@LIBS@,$LIBS,;t t s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t s,@CYGPATH_W@,$CYGPATH_W,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t s,@ACLOCAL@,$ACLOCAL,;t t s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t s,@AMTAR@,$AMTAR,;t t s,@install_sh@,$install_sh,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t s,@mkdir_p@,$mkdir_p,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@am__leading_dot@,$am__leading_dot,;t t s,@FXLOAD@,$FXLOAD,;t t s,@UDEV_RULES_DIR@,$UDEV_RULES_DIR,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } _ACEOF cat >>$CONFIG_STATUS <<_ACEOF sed "$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi midisport-firmware-1.2+dsfg1/install-sh0000755000175000017500000002244110053321727016251 0ustar fabfab#!/bin/sh # install - install a program, script, or datafile scriptversion=2004-04-01.17 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename= transform_arg= instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= stripcmd= rmcmd="$rmprog -f" mvcmd="$mvprog" src= dst= dir_arg= usage="Usage: $0 [OPTION]... SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 -d DIRECTORIES... In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default. In the second, create the directory path DIR. Options: -b=TRANSFORMBASENAME -c copy source (using $cpprog) instead of moving (using $mvprog). -d create directories instead of installing files. -g GROUP $chgrp installed files to GROUP. -m MODE $chmod installed files to MODE. -o USER $chown installed files to USER. -s strip installed files (using $stripprog). -t=TRANSFORM --help display this help and exit. --version display version info and exit. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test -n "$1"; do case $1 in -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; -c) instcmd=$cpprog shift continue;; -d) dir_arg=true shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; --help) echo "$usage"; exit 0;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -s) stripcmd=$stripprog shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; --version) echo "$0 $scriptversion"; exit 0;; *) # When -d is used, all remaining arguments are directories to create. test -n "$dir_arg" && break # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dstarg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dstarg" shift # fnord fi shift # arg dstarg=$arg done break;; esac done if test -z "$1"; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi for src do # Protect names starting with `-'. case $src in -*) src=./$src ;; esac if test -n "$dir_arg"; then dst=$src src= if test -d "$dst"; then instcmd=: chmodcmd= else instcmd=$mkdirprog fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dstarg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dstarg # Protect names starting with `-'. case $dst in -*) dst=./$dst ;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then dst=$dst/`basename "$src"` fi fi # This sed command emulates the dirname command. dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # Skip lots of stat calls in the usual case. if test ! -d "$dstdir"; then defaultIFS=' ' IFS="${IFS-$defaultIFS}" oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` IFS=$oIFS pathcomp= while test $# -ne 0 ; do pathcomp=$pathcomp$1 shift if test ! -d "$pathcomp"; then $mkdirprog "$pathcomp" || lasterr=$? # mkdir can fail with a `File exist' error in case several # install-sh are creating the directory concurrently. This # is OK. test ! -d "$pathcomp" && { (exit ${lasterr-1}); exit; } fi pathcomp=$pathcomp/ done fi if test -n "$dir_arg"; then $doit $instcmd "$dst" \ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } else # If we're going to rename the final executable, determine the name now. if test -z "$transformarg"; then dstfile=`basename "$dst"` else dstfile=`basename "$dst" $transformbasename \ | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename. test -z "$dstfile" && dstfile=`basename "$dst"` # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 trap '(exit $?); exit' 1 2 13 15 # Move or copy the file name to the temp name $doit $instcmd "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && # Now rename the file to the real destination. { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ || { # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { if test -f "$dstdir/$dstfile"; then $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ || { echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 (exit 1); exit } else : fi } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" } } fi || { (exit 1); exit; } done # The final little trick to "correctly" pass the exit status to the exit trap. { (exit 0); exit } # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: midisport-firmware-1.2+dsfg1/missing0000755000175000017500000002466610053321727015657 0ustar fabfab#! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2003-09-02.23 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case "$1" in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to ." ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` fi if [ -f "$file" ]; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then # We have makeinfo, but it failed. exit 1 fi echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; tar) shift if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 fi # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case "$firstarg" in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case "$firstarg" in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: midisport-firmware-1.2+dsfg1/42-midisport-firmware.rules.in0000644000175000017500000000241010402650671021770 0ustar fabfab# midisport-firmware.rules - udev rules for loading firmware into MidiSport devices # DEVPATH=="/*.0" selects interface 0 only # (some udev versions don't work with SYSFS{bInterfaceNumber}) # MidiSport 2x2 ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1001/*", RUN+="@fxload@ -s @firmwaredir@/MidiSportLoader.ihx -I @firmwaredir@/MidiSport2x2.ihx" # MidiSport 1x1 ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1010/*", RUN+="@fxload@ -s @firmwaredir@/MidiSportLoader.ihx -I @firmwaredir@/MidiSport1x1.ihx" # KeyStation ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1014/*", RUN+="@fxload@ -s @firmwaredir@/MidiSportLoader.ihx -I @firmwaredir@/MidiSportKS.ihx" # MidiSport 4x4 ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1020/*", RUN+="@fxload@ -s @firmwaredir@/MidiSportLoader.ihx -I @firmwaredir@/MidiSport4x4.ihx" # MidiSport 8x8 ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1031/110", RUN+="@fxload@ -s @firmwaredir@/MidiSportLoader.ihx -I @firmwaredir@/MidiSport8x8-2.10.ihx" ACTION=="add", SUBSYSTEM=="usb", DEVPATH=="/*.0", ENV{PRODUCT}=="763/1031/121", RUN+="@fxload@ -s @firmwaredir@/MidiSportLoader.ihx -I @firmwaredir@/MidiSport8x8-2.21.ihx" # vim: ft=conf midisport-firmware-1.2+dsfg1/LICENSE0000644000175000017500000000222310402650671015247 0ustar fabfabThe firmware files (*.ihx) are copyrighted by Midiman, and can be used and redistributed only as part of this package. All other files are distributed under the following license: Copyright (c) 2003-2006 Clemens Ladisch Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. Alternatively, this software may be distributed and/or modified under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. midisport-firmware-1.2+dsfg1/Changelog0000644000175000017500000000053310402650671016056 0ustar fabfabVersion 1.2 * configure.ac: check for minimum required udev version and fxload availability Version 1.1 * 42-midisport-firmware.rules.in: for compatibility with older udev versions, removed GOTO optimization Version 1.0 added firmware files added udev support and removed hotplug support older versions (changes not recorded) midisport-firmware-1.2+dsfg1/midisport-firmware.spec.in0000644000175000017500000000217710402650671021357 0ustar fabfab# Note: this file was written on a Slackware system. # You might want to fix the remaining bugs before using it. ;-) Name: midisport-firmware Version: @version@ Release: 1 Summary: firmware for MidiSport devices License: proprietary Group: System Environment/Daemons Source: %{name}-%{version}.tar.gz URL: http://usb-midi-fw.sourceforget.net/ BuildRoot: %{_tmppath}/%{name}-%{version}-buildroot BuildArch: noarch # fxload may be part of linux-hotplug Requires: fxload udev %description This package allows you to use the MidiSport USB MIDI interfaces from M-Audio/Midiman with Linux. It sets up udev rules to automatically load the firmware into the device. Supported devices: - MidiSport 1x1 - MidiSport 2x2 - MidiSport 4x4 - MidiSport 8x8 - MidiSport Uno - Keystation - Oxygen - Radium (You don't need a firmware download for the USB Audio Quattro, Duo, or MidiSport 2x4.) %prep %setup %build %configure make %install make DESTDIR=%{buildroot} install %files -f files.list %defattr(-,root,root) %doc README LICENSE Changelog %clean rm -rf %{buildroot} %changelog * Sat Feb 11 2006 Clemens Ladisch created midisport-firmware-1.2+dsfg1/midisport-firmware.spec0000644000175000017500000000217110402650732020742 0ustar fabfab# Note: this file was written on a Slackware system. # You might want to fix the remaining bugs before using it. ;-) Name: midisport-firmware Version: 1.2 Release: 1 Summary: firmware for MidiSport devices License: proprietary Group: System Environment/Daemons Source: %{name}-%{version}.tar.gz URL: http://usb-midi-fw.sourceforget.net/ BuildRoot: %{_tmppath}/%{name}-%{version}-buildroot BuildArch: noarch # fxload may be part of linux-hotplug Requires: fxload udev %description This package allows you to use the MidiSport USB MIDI interfaces from M-Audio/Midiman with Linux. It sets up udev rules to automatically load the firmware into the device. Supported devices: - MidiSport 1x1 - MidiSport 2x2 - MidiSport 4x4 - MidiSport 8x8 - MidiSport Uno - Keystation - Oxygen - Radium (You don't need a firmware download for the USB Audio Quattro, Duo, or MidiSport 2x4.) %prep %setup %build %configure make %install make DESTDIR=%{buildroot} install %files -f files.list %defattr(-,root,root) %doc README LICENSE Changelog %clean rm -rf %{buildroot} %changelog * Sat Feb 11 2006 Clemens Ladisch created