amavisd-milter-1.5.0/000777 001751 001751 00000000000 11367260642 014404 5ustar00rehoreho000000 000000 amavisd-milter-1.5.0/amavisd-milter/000777 001751 001751 00000000000 11367260642 017322 5ustar00rehoreho000000 000000 amavisd-milter-1.5.0/INSTALL000644 001751 001751 00000015363 10246415720 015433 0ustar00rehoreho000000 000000 Obtaining the software ====================== Fetch the tarball from Sourceforge and unpack it: http://sourceforge.net/project/showfiles.php?group_id=138169 Start reading with README, then CHANGES and INSTALL. Basic Installation ================== The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that you can run in the future to recreate the current configuration, a file `config.cache' that saves the results of its tests to speed up reconfiguring, and a file `config.log' containing compiler output (useful mainly for debugging `configure'). If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can be considered for the next release. If at some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.in' is used to create `configure' by a program called `autoconf'. You only need `configure.in' if you want to change it or regenerate `configure' using a newer version of `autoconf'. The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. If you're using `csh' on an old version of System V, you might need to type `sh ./configure' instead to prevent `csh' from trying to execute `configure' itself. Running `configure' takes a while. While running, it prints some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Type `make install' to install the programs and any data files and documentation. 4. You can remove the program binaries and object files from the source code directory by typing `make clean'. Compilers and Options ===================== Some systems require unusual options for compilation or linking that the `configure' script does not know about. You can give `configure' initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this: CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure Or on systems that have the `env' program, you can do it like this: env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure Compiling For Multiple Architectures ==================================== You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. If you have to use a `make' that does not supports the `VPATH' variable, you have to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use `make distclean' before reconfiguring for another architecture. Installation Names ================== By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the option `--prefix=PATH'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give `configure' the option `--exec-prefix=PATH', the package will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. Optional Features ================= Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The `README' should mention any `--enable-' and `--with-' options that the package recognizes. Specifying the System Type ========================== There may be some features `configure' can not figure out automatically, but needs to determine by the type of host the package will run on. Usually `configure' can figure that out, but if it prints a message saying it can not guess the host type, give it the `--host=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name with three fields: CPU-COMPANY-SYSTEM See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the host type. If you are building compiler tools for cross-compiling, you can also use the `--target=TYPE' option to select the type of system they will produce code for and the `--build=TYPE' option to select the type of system on which you are compiling the package. Sharing Defaults ================ If you want to set default values for `configure' scripts to share, you can create a site shell script called `config.site' that gives default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. Operation Controls ================== `configure' recognizes the following options to control how it operates. `--cache-file=FILE' Use and save the results of the tests in FILE instead of `./config.cache'. Set FILE to `/dev/null' to disable caching, for debugging `configure'. `--help' Print a summary of the options to `configure', and exit. `--quiet' `--silent' `-q' Do not print messages saying which checks are being made. `--srcdir=DIR' Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. `--version' Print the version of Autoconf used to generate the `configure' script, and exit. `configure' also accepts some other, not widely useful, options. $Id: INSTALL,v 1.3 2005/05/29 19:45:20 reho Exp $ amavisd-milter-1.5.0/aclocal.m4000644 001751 001751 00000101627 11367260546 016252 0ustar00rehoreho000000 000000 # generated automatically by aclocal 1.10.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl m4_if(AC_AUTOCONF_VERSION, [2.62],, [m4_warning([this file was generated for autoconf 2.62. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) # Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.10' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.10.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.10.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 3 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 13 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.60])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_arg=$1 _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_PROG_CC_C_O # -------------- # Like AC_PROG_CC_C_O, but changed for automake. AC_DEFUN([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC_C_O])dnl AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl # FIXME: we rely on the cache variable name because # there is no other way. set dummy $CC ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi dnl Make sure AC_PROG_CC is never called again, or it will override our dnl setting of CC. m4_define([AC_PROG_CC], [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([aclocal/acinclude.m4]) m4_include([aclocal/acx_pthread.m4]) m4_include([aclocal/ax_path_milter.m4]) m4_include([aclocal/dirfd.m4]) m4_include([aclocal/eilseq.m4]) m4_include([aclocal/eoverflow.m4]) amavisd-milter-1.5.0/configure000755 001751 001751 00001265272 11367260553 016327 0ustar00rehoreho000000 000000 #! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated by GNU Autoconf 2.62 for amavisd-milter 1.5.0. # # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, # 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH if test "x$CONFIG_SHELL" = x; then if (eval ":") 2>/dev/null; then as_have_required=yes else as_have_required=no fi if test $as_have_required = yes && (eval ": (as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=\$LINENO as_lineno_2=\$LINENO test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ") 2> /dev/null; then : else as_candidate_shells= as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. case $as_dir in /*) for as_base in sh bash ksh sh5; do as_candidate_shells="$as_candidate_shells $as_dir/$as_base" done;; esac done IFS=$as_save_IFS for as_shell in $as_candidate_shells $SHELL; do # Try only shells that exist, to save several forks. if { test -f "$as_shell" || test -f "$as_shell.exe"; } && { ("$as_shell") 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : _ASEOF }; then CONFIG_SHELL=$as_shell as_have_required=yes if { "$as_shell" 2> /dev/null <<\_ASEOF if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi : (as_func_return () { (exit $1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = "$1" ); then : else exitcode=1 echo positional parameters were not saved. fi test $exitcode = 0) || { (exit 1); exit 1; } ( as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } _ASEOF }; then break fi fi done if test "x$CONFIG_SHELL" != x; then for as_var in BASH_ENV ENV do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done export CONFIG_SHELL exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} fi if test $as_have_required = no; then echo This script requires a shell more modern than all the echo shells that I found on your system. Please install a echo modern shell, or manually run the script under such a echo shell if you do have one. { (exit 1); exit 1; } fi fi fi (eval "as_func_return () { (exit \$1) } as_func_success () { as_func_return 0 } as_func_failure () { as_func_return 1 } as_func_ret_success () { return 0 } as_func_ret_failure () { return 1 } exitcode=0 if as_func_success; then : else exitcode=1 echo as_func_success failed. fi if as_func_failure; then exitcode=1 echo as_func_failure succeeded. fi if as_func_ret_success; then : else exitcode=1 echo as_func_ret_success failed. fi if as_func_ret_failure; then exitcode=1 echo as_func_ret_failure succeeded. fi if ( set x; as_func_ret_success y && test x = \"\$1\" ); then : else exitcode=1 echo positional parameters were not saved. fi test \$exitcode = 0") || { echo No shell found that supports shell functions. echo Please tell bug-autoconf@gnu.org about your system, echo including any error possibly output before this message. echo This can help us improve future autoconf versions. echo Configuration will now proceed without shell functions. } as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 7<&0 &1 # Name of the host. # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` # # Initializations. # ac_default_prefix=/usr/local ac_clean_files= ac_config_libobj_dir=. LIBOBJS= cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='amavisd-milter' PACKAGE_TARNAME='amavisd-milter' PACKAGE_VERSION='1.5.0' PACKAGE_STRING='amavisd-milter 1.5.0' PACKAGE_BUGREPORT='' ac_unique_file="aclocal/acinclude.m4" # Factoring default headers for most tests. ac_includes_default="\ #include #ifdef HAVE_SYS_TYPES_H # include #endif #ifdef HAVE_SYS_STAT_H # include #endif #ifdef STDC_HEADERS # include # include #else # ifdef HAVE_STDLIB_H # include # endif #endif #ifdef HAVE_STRING_H # if !defined STDC_HEADERS && defined HAVE_MEMORY_H # include # endif # include #endif #ifdef HAVE_STRINGS_H # include #endif #ifdef HAVE_INTTYPES_H # include #endif #ifdef HAVE_STDINT_H # include #endif #ifdef HAVE_UNISTD_H # include #endif" ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datarootdir datadir sysconfdir sharedstatedir localstatedir includedir oldincludedir docdir infodir htmldir dvidir pdfdir psdir libdir localedir mandir DEFS ECHO_C ECHO_N ECHO_T LIBS build_alias host_alias target_alias build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA am__isrc CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP INSTALL_STRIP_PROGRAM MKDIR_P mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE acx_pthread_config PTHREAD_CC PTHREAD_LIBS PTHREAD_CFLAGS CPP GREP EGREP LIBOBJS MILTER_LIBS MILTER_CPPFLAGS MILTER_LDFLAGS SENDMAIL_BASE_DIR SENDMAIL_OBJ_DIR EILSEQ EOVERFLOW LTLIBOBJS' ac_subst_files='' ac_user_opts=' enable_option_checking enable_dependency_tracking enable_debug with_sendmail with_sendmail_base with_sendmail_obj with_working_dir ' ac_precious_vars='build_alias host_alias target_alias CC CFLAGS LDFLAGS LIBS CPPFLAGS CPP' # Initialize some variables set by options. ac_init_help= ac_init_version=false ac_unrecognized_opts= ac_unrecognized_sep= # The variables have the same names as the options, with # dashes changed to underlines. cache_file=/dev/null exec_prefix=NONE no_create= no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= verbose= x_includes=NONE x_libraries=NONE # Installation directory options. # These are left unexpanded so users can "make install exec_prefix=/foo" # and all the variables that are supposed to be based on exec_prefix # by default will actually change. # Use braces instead of parens because sh, perl, etc. also accept them. # (The list follows the same order as the GNU Coding Standards.) bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datarootdir='${prefix}/share' datadir='${datarootdir}' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' includedir='${prefix}/include' oldincludedir='/usr/include' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' infodir='${datarootdir}/info' htmldir='${docdir}' dvidir='${docdir}' pdfdir='${docdir}' psdir='${docdir}' libdir='${exec_prefix}/lib' localedir='${datarootdir}/locale' mandir='${datarootdir}/man' ac_prev= ac_dashdash= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval $ac_prev=\$ac_option ac_prev= continue fi case $ac_option in *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case $ac_dashdash$ac_option in --) ac_dashdash=yes ;; -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file=$ac_optarg ;; --config-cache | -C) cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=*) datadir=$ac_optarg ;; -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ | --dataroo | --dataro | --datar) ac_prev=datarootdir ;; -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) datarootdir=$ac_optarg ;; -disable-* | --disable-*) ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=no ;; -docdir | --docdir | --docdi | --doc | --do) ac_prev=docdir ;; -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) docdir=$ac_optarg ;; -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ac_prev=dvidir ;; -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) dvidir=$ac_optarg ;; -enable-* | --enable-*) ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "enable_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval enable_$ac_useropt=\$ac_optarg ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he | -h) ac_init_help=long ;; -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) ac_init_help=recursive ;; -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) ac_init_help=short ;; -host | --host | --hos | --ho) ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) host_alias=$ac_optarg ;; -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ac_prev=htmldir ;; -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ | --ht=*) htmldir=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir=$ac_optarg ;; -localedir | --localedir | --localedi | --localed | --locale) ac_prev=localedir ;; -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) localedir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst | --locals) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name=$ac_optarg ;; -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ac_prev=pdfdir ;; -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) pdfdir=$ac_optarg ;; -psdir | --psdir | --psdi | --psd | --ps) ac_prev=psdir ;; -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) psdir=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers | -V) ac_init_version=: ;; -with-* | --with-*) ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=\$ac_optarg ;; -without-* | --without-*) ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 { (exit 1); exit 1; }; } ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in *" "with_$ac_useropt" "*) ;; *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" ac_unrecognized_sep=', ';; esac eval with_$ac_useropt=no ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; -*) { $as_echo "$as_me: error: unrecognized option: $ac_option Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 { (exit 1); exit 1; }; } eval $ac_envvar=\$ac_optarg export $ac_envvar ;; *) # FIXME: should be removed in autoconf 3.0. $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` { $as_echo "$as_me: error: missing argument to $ac_option" >&2 { (exit 1); exit 1; }; } fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; fatal) { $as_echo "$as_me: error: Unrecognized options: $ac_unrecognized_opts" >&2 { (exit 1); exit 1; }; } ;; *) $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi # Check all directory arguments for consistency. for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ datadir sysconfdir sharedstatedir localstatedir includedir \ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ libdir localedir mandir do eval ac_val=\$$ac_var # Remove trailing slashes. case $ac_val in */ ) ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` eval $ac_var=\$ac_val;; esac # Be sure to have absolute directory names. case $ac_val in [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 { (exit 1); exit 1; }; } done # There might be people who depend on the old broken behavior: `$host' # used to hold the argument of --host etc. # FIXME: To remove some day. build=$build_alias host=$host_alias target=$target_alias # FIXME: To remove some day. if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi fi ac_tool_prefix= test -n "$host_alias" && ac_tool_prefix=$host_alias- test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || { $as_echo "$as_me: error: Working directory cannot be determined" >&2 { (exit 1); exit 1; }; } test "X$ac_ls_di" = "X$ac_pwd_ls_di" || { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 { (exit 1); exit 1; }; } # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then the parent directory. ac_confdir=`$as_dirname -- "$as_myself" || $as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_myself" : 'X\(//\)[^/]' \| \ X"$as_myself" : 'X\(//\)$' \| \ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_myself" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` srcdir=$ac_confdir if test ! -r "$srcdir/$ac_unique_file"; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 { (exit 1); exit 1; }; } fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 { (exit 1); exit 1; }; } pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then srcdir=. fi # Remove unnecessary trailing slashes from srcdir. # Double slashes in file names in object file debugging info # mess up M-x gdb in Emacs. case $srcdir in */) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; esac for ac_var in $ac_precious_vars; do eval ac_env_${ac_var}_set=\${${ac_var}+set} eval ac_env_${ac_var}_value=\$${ac_var} eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} eval ac_cv_env_${ac_var}_value=\$${ac_var} done # # Report the --help message. # if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF \`configure' configures amavisd-milter 1.5.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... To assign environment variables (e.g., CC, CFLAGS...), specify them as VAR=VALUE. See below for descriptions of some of the useful variables. Defaults for the options are specified in brackets. Configuration: -h, --help display this help and exit --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit -q, --quiet, --silent do not print \`checking...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files --srcdir=DIR find the sources in DIR [configure dir or \`..'] Installation directories: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [PREFIX] By default, \`make install' will install all the files in \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify an installation prefix other than \`$ac_default_prefix' using \`--prefix', for instance \`--prefix=\$HOME'. For better control, use the options below. Fine tuning of the installation directories: --bindir=DIR user executables [EPREFIX/bin] --sbindir=DIR system admin executables [EPREFIX/sbin] --libexecdir=DIR program executables [EPREFIX/libexec] --sysconfdir=DIR read-only single-machine data [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] --localstatedir=DIR modifiable single-machine data [PREFIX/var] --libdir=DIR object code libraries [EPREFIX/lib] --includedir=DIR C header files [PREFIX/include] --oldincludedir=DIR C header files for non-gcc [/usr/include] --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] --datadir=DIR read-only architecture-independent data [DATAROOTDIR] --infodir=DIR info documentation [DATAROOTDIR/info] --localedir=DIR locale-dependent data [DATAROOTDIR/locale] --mandir=DIR man documentation [DATAROOTDIR/man] --docdir=DIR documentation root [DATAROOTDIR/doc/amavisd-milter] --htmldir=DIR html documentation [DOCDIR] --dvidir=DIR dvi documentation [DOCDIR] --pdfdir=DIR pdf documentation [DOCDIR] --psdir=DIR ps documentation [DOCDIR] _ACEOF cat <<\_ACEOF Program names: --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names System types: --build=BUILD configure for building on BUILD [guessed] --host=HOST cross-compile to build programs to run on HOST [BUILD] --target=TARGET configure for building compilers for TARGET [HOST] _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in short | recursive ) echo "Configuration of amavisd-milter 1.5.0:";; esac cat <<\_ACEOF Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors --enable-debug enables debug output and debug symbols [default=no] Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-sendmail= base directory of sendmail installation --with-sendmail-base= base directory of sendmail distribution --with-sendmail-obj= obj.* subdirectory in sendmail distribution --with-working-dir[=] set working directory (default tmp) SUBDIR subdirectry of local state dirertory /DIR absolute path to working directory Some influential environment variables: CC C compiler command CFLAGS C compiler flags LDFLAGS linker flags, e.g. -L if you have libraries in a nonstandard directory LIBS libraries to pass to the linker, e.g. -l CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if you have headers in a nonstandard directory CPP C preprocessor Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. _ACEOF ac_status=$? fi if test "$ac_init_help" = "recursive"; then # If there are subdirs, report their specific --help. for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue test -d "$ac_dir" || { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || continue ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix cd "$ac_dir" || { ac_status=$?; continue; } # Check for guested configure. if test -f "$ac_srcdir/configure.gnu"; then echo && $SHELL "$ac_srcdir/configure.gnu" --help=recursive elif test -f "$ac_srcdir/configure"; then echo && $SHELL "$ac_srcdir/configure" --help=recursive else $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 fi || ac_status=$? cd "$ac_pwd" || { ac_status=$?; break; } done fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF amavisd-milter configure 1.5.0 generated by GNU Autoconf 2.62 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by amavisd-milter $as_me 1.5.0, which was generated by GNU Autoconf 2.62. Invocation command line was $ $0 $@ _ACEOF exec 5>>config.log { cat <<_ASUNAME ## --------- ## ## Platform. ## ## --------- ## hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` /usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` _ASUNAME as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. $as_echo "PATH: $as_dir" done IFS=$as_save_IFS } >&5 cat >&5 <<_ACEOF ## ----------- ## ## Core tests. ## ## ----------- ## _ACEOF # Keep a trace of the command line. # Strip out --no-create and --no-recursion so they do not pile up. # Strip out --silent because we don't want to record it for future runs. # Also quote any args containing shell meta-characters. # Make two passes to allow for proper duplicate-argument suppression. ac_configure_args= ac_configure_args0= ac_configure_args1= ac_must_keep_next=false for ac_pass in 1 2 do for ac_arg do case $ac_arg in -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) continue ;; *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; 2) ac_configure_args1="$ac_configure_args1 '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else case $ac_arg in *=* | --config-cache | -C | -disable-* | --disable-* \ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | -with-* | --with-* | -without-* | --without-* | --x) case "$ac_configure_args0 " in "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; esac ;; -* ) ac_must_keep_next=true ;; esac fi ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac done done $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there # would cause problems or look ugly. # WARNING: Use '\'' to represent an apostrophe within the trap. # WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. trap 'exit_status=$? # Save into config.log some information that might help in debugging. { echo cat <<\_ASBOX ## ---------------- ## ## Cache variables. ## ## ---------------- ## _ASBOX echo # The following way of writing the cache mishandles newlines in values, ( for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 $as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( *${as_nl}ac_space=\ *) sed -n \ "s/'\''/'\''\\\\'\'''\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ;; #( *) sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) echo cat <<\_ASBOX ## ----------------- ## ## Output variables. ## ## ----------------- ## _ASBOX echo for ac_var in $ac_subst_vars do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo if test -n "$ac_subst_files"; then cat <<\_ASBOX ## ------------------- ## ## File substitutions. ## ## ------------------- ## _ASBOX echo for ac_var in $ac_subst_files do eval ac_val=\$$ac_var case $ac_val in *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; esac $as_echo "$ac_var='\''$ac_val'\''" done | sort echo fi if test -s confdefs.h; then cat <<\_ASBOX ## ----------- ## ## confdefs.h. ## ## ----------- ## _ASBOX echo cat confdefs.h echo fi test "$ac_signal" != 0 && $as_echo "$as_me: caught signal $ac_signal" $as_echo "$as_me: exit $exit_status" } >&5 rm -f core *.core core.conftest.* && rm -f -r conftest* confdefs* conf$$* $ac_clean_files && exit $exit_status ' 0 for ac_signal in 1 2 13 15; do trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then ac_site_file1=$CONFIG_SITE elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site else ac_site_file1=$ac_default_prefix/share/config.site ac_site_file2=$ac_default_prefix/etc/config.site fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue if test -r "$ac_site_file"; then { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then # Some versions of bash will fail to source /dev/null (special # files actually), so we avoid doing that. if test -f "$cache_file"; then { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; *) . "./$cache_file";; esac fi else { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false for ac_var in $ac_precious_vars; do eval ac_old_set=\$ac_cv_env_${ac_var}_set eval ac_new_set=\$ac_env_${ac_var}_set eval ac_old_val=\$ac_cv_env_${ac_var}_value eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; *) if test "x$ac_old_val" != "x$ac_new_val"; then # differences in whitespace do not lead to failure. ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac # Pass precious variables to config.status. if test "$ac_new_set" = set; then case $ac_new_val in *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; *) ac_arg=$ac_var=$ac_new_val ;; esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 $as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_aux_dir= for ac_dir in aclocal "$srcdir"/aclocal; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f "$ac_dir/install.sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break elif test -f "$ac_dir/shtool"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/shtool install -c" break fi done if test -z "$ac_aux_dir"; then { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in aclocal \"$srcdir\"/aclocal" >&5 $as_echo "$as_me: error: cannot find install-sh or install.sh in aclocal \"$srcdir\"/aclocal" >&2;} { (exit 1); exit 1; }; } fi # These three variables are undocumented and unsupported, # and are intended to be withdrawn in a future Autoconf release. # They can cause serious problems if a builder's source tree is in a directory # whose full name contains unusual characters. ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ac_config_headers="$ac_config_headers config.h" # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 $as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} { (exit 1); exit 1; }; } { $as_echo "$as_me:$LINENO: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } if test "${ac_cv_build+set}" = set; then $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 $as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} { (exit 1); exit 1; }; } ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 $as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; *) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 $as_echo "$as_me: error: invalid value of canonical build" >&2;} { (exit 1); exit 1; }; };; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' set x $ac_cv_build shift build_cpu=$1 build_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: build_os=$* IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:$LINENO: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } if test "${ac_cv_host+set}" = set; then $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 $as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} { (exit 1); exit 1; }; } fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; *) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 $as_echo "$as_me: error: invalid value of canonical host" >&2;} { (exit 1); exit 1; }; };; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' set x $ac_cv_host shift host_cpu=$1 host_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: host_os=$* IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac { $as_echo "$as_me:$LINENO: checking target system type" >&5 $as_echo_n "checking target system type... " >&6; } if test "${ac_cv_target+set}" = set; then $as_echo_n "(cached) " >&6 else if test "x$target_alias" = x; then ac_cv_target=$ac_cv_host else ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 $as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} { (exit 1); exit 1; }; } fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_target" >&5 $as_echo "$ac_cv_target" >&6; } case $ac_cv_target in *-*-*) ;; *) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 $as_echo "$as_me: error: invalid value of canonical target" >&2;} { (exit 1); exit 1; }; };; esac target=$ac_cv_target ac_save_IFS=$IFS; IFS='-' set x $ac_cv_target shift target_cpu=$1 target_vendor=$2 shift; shift # Remember, the first character of IFS is used to create $*, # except with old shells: target_os=$* IFS=$ac_save_IFS case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac # The aliases save the names the user supplied, while $host etc. # will get canonicalized. test -n "$target_alias" && test "$program_prefix$program_suffix$program_transform_name" = \ NONENONEs,x,x, && program_prefix=${target_alias}- am__api_version='1.10' # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 $as_echo_n "checking whether build environment is sane... " >&6; } # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$*" != "X $srcdir/configure conftest.file" \ && test "$*" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&5 $as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" >&2;} { (exit 1); exit 1; }; } fi test "$2" = conftest.file ) then # Ok. : else { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! Check your system clock" >&5 $as_echo "$as_me: error: newly created file is older than distributed files! Check your system clock" >&2;} { (exit 1); exit 1; }; } fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } test "$program_prefix" != NONE && program_transform_name="s&^&$program_prefix&;$program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s&\$&$program_suffix&;$program_transform_name" # Double any \ or $. # By default was `s,x,x', remove it if useless. ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi { $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then if test "${ac_cv_path_mkdir+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ 'mkdir (fileutils) '4.1*) ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext break 3;; esac done done done IFS=$as_save_IFS fi if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else # As a last resort, use the slow shell script. Don't cache a # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi { $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } mkdir_p="$MKDIR_P" case $mkdir_p in [\\/$]* | ?:[\\/]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_AWK+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_AWK="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi AWK=$ac_cv_prog_AWK if test -n "$AWK"; then { $as_echo "$as_me:$LINENO: result: $AWK" >&5 $as_echo "$AWK" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$AWK" && break done { $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 $as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; } fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi # Define the identity of the package. PACKAGE='amavisd-milter' VERSION='1.5.0' cat >>confdefs.h <<_ACEOF #define PACKAGE "$PACKAGE" _ACEOF cat >>confdefs.h <<_ACEOF #define VERSION "$VERSION" _ACEOF # Some tools Automake needs. ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi STRIP=$ac_cv_prog_STRIP if test -n "$STRIP"; then { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 $as_echo "$STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP if test -n "$ac_ct_STRIP"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 $as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_STRIP" = x; then STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 $as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac STRIP=$ac_ct_STRIP fi else STRIP="$ac_cv_prog_STRIP" fi fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" # We need awk for the "check" target. The system "awk" is bad on # some platforms. # Always define AMTAR for backward compatibility. AMTAR=${AMTAR-"${am_missing_run}tar"} am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' # Kludge to keep autoconf from adding -g -O2 CFLAGS=" $CFLAGS" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AmigaOS /C/install, which installs bootblocks on floppy discs # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. { $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then if test "${ac_cv_path_install+set}" = set; then $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. # Account for people who put trailing slashes in PATH elements. case $as_dir/ in ./ | .// | /cC/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : elif test $ac_prog = install && grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # program-specific install script used by HP pwplus--don't use. : else rm -rf conftest.one conftest.two conftest.dir echo one > conftest.one echo two > conftest.two mkdir conftest.dir if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && test -s conftest.one && test -s conftest.two && test -s conftest.dir/conftest.one && test -s conftest.dir/conftest.two then ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" break 3 fi fi fi done done ;; esac done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir fi if test "${ac_cv_path_install+set}" = set; then INSTALL=$ac_cv_path_install else # As a last resort, use the slow shell script. Don't cache a # value for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. INSTALL=$ac_install_sh fi fi { $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' { $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; *) eval ac_cv_prog_make_${ac_make}_set=no;; esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi RANLIB=$ac_cv_prog_RANLIB if test -n "$RANLIB"; then { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 $as_echo "$RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_RANLIB"; then ac_ct_RANLIB=$RANLIB # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_RANLIB"; then ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_RANLIB="ranlib" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB if test -n "$ac_ct_RANLIB"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 $as_echo "$ac_ct_RANLIB" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_RANLIB" = x; then RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 $as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac RANLIB=$ac_ct_RANLIB fi else RANLIB="$ac_cv_prog_RANLIB" fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="gcc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 $as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi else CC="$ac_cv_prog_CC" fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="${ac_tool_prefix}cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else ac_prog_rejected=no as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# != 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" fi fi fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test -z "$CC"; then if test -n "$ac_tool_prefix"; then for ac_prog in cl.exe do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then { $as_echo "$as_me:$LINENO: result: $CC" >&5 $as_echo "$CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$CC" && break done fi if test -z "$CC"; then ac_ct_CC=$CC for ac_prog in cl.exe do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_ac_ct_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_ac_ct_CC="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$ac_ct_CC" && break done if test "x$ac_ct_CC" = x; then CC="" else case $cross_compiling:$ac_tool_warned in yes:) { $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&5 $as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools whose name does not start with the host triplet. If you think this configuration is useful to you, please write to autoconf@gnu.org." >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC fi fi fi test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&5 $as_echo "$as_me: error: no acceptable C compiler found in \$PATH See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } # Provide some information about the compiler. $as_echo "$as_me:$LINENO: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 { (ac_try="$ac_compiler --version >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler --version >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -v >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -v >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } { (ac_try="$ac_compiler -V >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compiler -V >&5") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. { $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 $as_echo_n "checking for C compiler default output file name... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" ac_rmfiles= for ac_file in $ac_files do case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; * ) ac_rmfiles="$ac_rmfiles $ac_file";; esac done rm -f $ac_rmfiles if { (ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link_default") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, # so that the user can short-circuit this test for compilers unknown to # Autoconf. for ac_file in $ac_files '' do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; [ab].out ) # We found the default executable, but exeext='' is most # certainly right. break;; *.* ) if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi # We set ac_cv_exeext here because the later test for it is not # safe: cross compilers may not add the suffix if given an `-o' # argument, so we may need to know it at that point already. # Even if this section looks crufty: it has the advantage of # actually working. break;; * ) break;; esac done test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi { $as_echo "$as_me:$LINENO: result: $ac_file" >&5 $as_echo "$ac_file" >&6; } if test -z "$ac_file"; then $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables See \`config.log' for more details." >&5 $as_echo "$as_me: error: C compiler cannot create executables See \`config.log' for more details." >&2;} { (exit 77); exit 77; }; } fi ac_exeext=$ac_cv_exeext # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 $as_echo_n "checking whether the C compiler works... " >&6; } # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 # If not cross compiling, check that we can run a simple program. if test "$cross_compiling" != yes; then if { ac_try='./$ac_file' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then cross_compiling=no else if test "$cross_compiling" = maybe; then cross_compiling=yes else { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot run C compiled programs. If you meant to cross compile, use \`--host'. See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi fi fi { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save # Check that the compiler produces executables we can run. If not, either # the compiler is broken, or we cross compile. { $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 $as_echo_n "checking whether we are cross compiling... " >&6; } { $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 $as_echo "$cross_compiling" >&6; } { $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with # `rm'. for ac_file in conftest.exe conftest conftest.*; do test -f "$ac_file" || continue case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` break;; * ) break;; esac done else { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest$ac_cv_exeext { $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT { $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } if test "${ac_cv_objext+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.o conftest.obj if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` break;; esac done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&5 $as_echo "$as_me: error: cannot compute suffix of object files: cannot compile See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi rm -f conftest.$ac_cv_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT { $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } if test "${ac_cv_c_compiler_gnu+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { #ifndef __GNUC__ choke me #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_compiler_gnu=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_compiler_gnu=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi { $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes else GCC= fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS { $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } if test "${ac_cv_prog_cc_g+set}" = set; then $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 CFLAGS="" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_g=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi { $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } if test "${ac_cv_prog_cc_c89+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); static char *e (p, i) char **p; int i; { return p[i]; } static char *f (char * (*g) (char **, int), char **p, ...) { char *s; va_list v; va_start (v,p); s = g (p, va_arg (v,int)); va_end (v); return s; } /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has function prototypes and stuff, but not '\xHH' hex character constants. These don't provoke an error unfortunately, instead are silently treated as 'x'. The following induces an error, until -std is added to get proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an array size at least. It's necessary to write '\x00'==0 to get something that's true only with -std. */ int osf4_cc_array ['\x00' == 0 ? 1 : -1]; /* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters inside strings and character constants. */ #define FOO(x) 'x' int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; int test (int i, double x); struct s1 {int (*f) (int a);}; struct s2 {int (*f) (double a);}; int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); int argc; char **argv; int main () { return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; ; return 0; } _ACEOF for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_prog_cc_c89=$ac_arg else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done rm -f conftest.$ac_ext CC=$ac_save_CC fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) { $as_echo "$as_me:$LINENO: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) { $as_echo "$as_me:$LINENO: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. { $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi { $as_echo "$as_me:$LINENO: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= AMDEP_FALSE='#' else AMDEP_TRUE='#' AMDEP_FALSE= fi depcc="$CC" am_compiler_list= { $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_CC_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_CC_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_CC_dependencies_compiler_type=none fi fi { $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type if test "x$enable_dependency_tracking" != xno \ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then am__fastdepCC_TRUE= am__fastdepCC_FALSE='#' else am__fastdepCC_TRUE='#' am__fastdepCC_FALSE= fi if test "x$CC" != xcc; then { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 $as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } else { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 $as_echo_n "checking whether cc understands -c and -o together... " >&6; } fi set dummy $CC; ac_cc=`$as_echo "$2" | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF # Make sure it works both with $CC and with simple cc. # We do the test twice because some compilers refuse to overwrite an # existing .o file with -o, though they will create one. ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* if { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -f conftest2.$ac_objext && { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then eval ac_cv_prog_cc_${ac_cc}_c_o=yes if test "x$CC" != xcc; then # Test first that cc exists at all. if { ac_try='cc -c conftest.$ac_ext >&5' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' rm -f conftest2.* if { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && test -f conftest2.$ac_objext && { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; then # cc works too. : else # cc exists but doesn't like -o. eval ac_cv_prog_cc_${ac_cc}_c_o=no fi fi fi else eval ac_cv_prog_cc_${ac_cc}_c_o=no fi rm -f core conftest* fi if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } cat >>confdefs.h <<\_ACEOF #define NO_MINUS_C_MINUS_O 1 _ACEOF fi # FIXME: we rely on the cache variable name because # there is no other way. set dummy $CC ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi # Check whether --enable-debug was given. if test "${enable_debug+set}" = set; then enableval=$enable_debug; if test $enableval = "no" then enable_debug="no" else enable_debug="yes" fi else enable_debug="no" fi CFLAGS=" $CFLAGS" if test "$GCC" = "yes"; then if test "$enable_debug" = "yes" then CFLAGS="-g -O2 $CFLAGS" CFLAGS="-W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align $CFLAGS" CFLAGS="-Wcast-qual -Wchar-subscripts -Winline -Wmissing-prototypes $CFLAGS" CFLAGS="-Wmissing-declarations -Wnested-externs -Wpointer-arith $CFLAGS" CFLAGS="-Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings $CFLAGS" else CFLAGS="-O2 -DNDEBUG $CFLAGS" fi fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu acx_pthread_ok=no # We used to check for pthread.h first, but this fails if pthread.h # requires special compiler flags (e.g. on True64 or Sequent). # It gets checked for in the link test anyway. # First of all, check if the user has set any of the PTHREAD_LIBS, # etcetera environment variables, and if threads linking works using # them: if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" { $as_echo "$as_me:$LINENO: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5 $as_echo_n "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char pthread_join (); int main () { return pthread_join (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then acx_pthread_ok=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5 $as_echo "$acx_pthread_ok" >&6; } if test x"$acx_pthread_ok" = xno; then PTHREAD_LIBS="" PTHREAD_CFLAGS="" fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" fi # We must check for the threads library under a number of different # names; the ordering is very important because some systems # (e.g. DEC) have both -lpthread and -lpthreads, where one of the # libraries is broken (non-POSIX). # Create a list of thread flags to try. Items starting with a "-" are # C compiler flags, and other items are library names, except for "none" # which indicates that we try without any flags at all, and "pthread-config" # which is a program returning the flags for the Pth emulation library. acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" # The ordering *is* (sometimes) important. Some notes on the # individual items follow: # pthreads: AIX (must check this before -lpthread) # none: in case threads are in libc; should be tried before -Kthread and # other compiler flags to prevent continual compiler warnings # -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) # -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads) # -pthreads: Solaris/gcc # -mthreads: Mingw32/gcc, Lynx/gcc # -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it # doesn't hurt to check since this sometimes defines pthreads too; # also defines -D_REENTRANT) # ... -mt is also the pthreads flag for HP/aCC # pthread: Linux, etcetera # --thread-safe: KAI C++ # pthread-config: use pthread-config program (for GNU Pth library) case "${host_cpu}-${host_os}" in *solaris*) # On Solaris (at least, for some versions), libc contains stubbed # (non-functional) versions of the pthreads routines, so link-based # tests will erroneously succeed. (We need to link with -pthreads/-mt/ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather # a function called by this macro, so we could check for that, but # who knows whether they'll stub that too in a future libc.) So, # we'll just look for -pthreads and -lpthread first: acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags" ;; esac if test x"$acx_pthread_ok" = xno; then for flag in $acx_pthread_flags; do case $flag in none) { $as_echo "$as_me:$LINENO: checking whether pthreads work without any flags" >&5 $as_echo_n "checking whether pthreads work without any flags... " >&6; } ;; -*) { $as_echo "$as_me:$LINENO: checking whether pthreads work with $flag" >&5 $as_echo_n "checking whether pthreads work with $flag... " >&6; } PTHREAD_CFLAGS="$flag" ;; pthread-config) # Extract the first word of "pthread-config", so it can be a program name with args. set dummy pthread-config; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_acx_pthread_config+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$acx_pthread_config"; then ac_cv_prog_acx_pthread_config="$acx_pthread_config" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_acx_pthread_config="yes" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS test -z "$ac_cv_prog_acx_pthread_config" && ac_cv_prog_acx_pthread_config="no" fi fi acx_pthread_config=$ac_cv_prog_acx_pthread_config if test -n "$acx_pthread_config"; then { $as_echo "$as_me:$LINENO: result: $acx_pthread_config" >&5 $as_echo "$acx_pthread_config" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi if test x"$acx_pthread_config" = xno; then continue; fi PTHREAD_CFLAGS="`pthread-config --cflags`" PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" ;; *) { $as_echo "$as_me:$LINENO: checking for the pthreads library -l$flag" >&5 $as_echo_n "checking for the pthreads library -l$flag... " >&6; } PTHREAD_LIBS="-l$flag" ;; esac save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="$PTHREAD_LIBS $LIBS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # Check for various functions. We must include pthread.h, # since some functions may be macros. (On the Sequent, we # need a special flag -Kthread to make this header compile.) # We check for pthread_join because it is in -lpthread on IRIX # while pthread_create is in libc. We check for pthread_attr_init # due to DEC craziness with -lpthreads. We check for # pthread_cleanup_push because it is one of the few pthread # functions on Solaris that doesn't have a non-functional libc stub. # We try pthread_create on general principles. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then acx_pthread_ok=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" { $as_echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5 $as_echo "$acx_pthread_ok" >&6; } if test "x$acx_pthread_ok" = xyes; then break; fi PTHREAD_LIBS="" PTHREAD_CFLAGS="" done fi # Various other checks: if test "x$acx_pthread_ok" = xyes; then save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. { $as_echo "$as_me:$LINENO: checking for joinable pthread attribute" >&5 $as_echo_n "checking for joinable pthread attribute... " >&6; } attr_name=unknown for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { int attr=$attr; return attr; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then attr_name=$attr; break else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext done { $as_echo "$as_me:$LINENO: result: $attr_name" >&5 $as_echo "$attr_name" >&6; } if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then cat >>confdefs.h <<_ACEOF #define PTHREAD_CREATE_JOINABLE $attr_name _ACEOF fi { $as_echo "$as_me:$LINENO: checking if more special flags are required for pthreads" >&5 $as_echo_n "checking if more special flags are required for pthreads... " >&6; } flag=no case "${host_cpu}-${host_os}" in *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";; *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";; esac { $as_echo "$as_me:$LINENO: result: ${flag}" >&5 $as_echo "${flag}" >&6; } if test "x$flag" != xno; then PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS" fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" # More AIX lossage: must compile with xlc_r or cc_r if test x"$GCC" != xyes; then for ac_prog in xlc_r cc_r do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 { $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } if test "${ac_cv_prog_PTHREAD_CC+set}" = set; then $as_echo_n "(cached) " >&6 else if test -n "$PTHREAD_CC"; then ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ac_cv_prog_PTHREAD_CC="$ac_prog" $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done done IFS=$as_save_IFS fi fi PTHREAD_CC=$ac_cv_prog_PTHREAD_CC if test -n "$PTHREAD_CC"; then { $as_echo "$as_me:$LINENO: result: $PTHREAD_CC" >&5 $as_echo "$PTHREAD_CC" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi test -n "$PTHREAD_CC" && break done test -n "$PTHREAD_CC" || PTHREAD_CC="${CC}" else PTHREAD_CC=$CC fi # The next part tries to detect GCC inconsistency with -shared on some # architectures and systems. The problem is that in certain # configurations, when -shared is specified, GCC "forgets" to # internally use various flags which are still necessary. { $as_echo "$as_me:$LINENO: checking whether to check for GCC pthread/shared inconsistencies" >&5 $as_echo_n "checking whether to check for GCC pthread/shared inconsistencies... " >&6; } check_inconsistencies=yes case "${host_cpu}-${host_os}" in *-darwin*) check_inconsistencies=no ;; esac if test x"$GCC" != xyes -o "x$check_inconsistencies" != xyes ; then { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } else { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } # In order not to create several levels of indentation, we test # the value of "$ok" until we find out the cure or run out of # ideas. ok="no" # # Prepare the flags # save_CFLAGS="$CFLAGS" save_LIBS="$LIBS" save_CC="$CC" # Try with the flags determined by the earlier checks. # # -Wl,-z,defs forces link-time symbol resolution, so that the # linking checks with -shared actually have any value # # FIXME: -fPIC is required for -shared on many architectures, # so we specify it here, but the right way would probably be to # properly detect whether it is actually required. CFLAGS="-shared -fPIC -Wl,-z,defs $CFLAGS $PTHREAD_CFLAGS" LIBS="$PTHREAD_LIBS $LIBS" CC="$PTHREAD_CC" { $as_echo "$as_me:$LINENO: checking whether -pthread is sufficient with -shared" >&5 $as_echo_n "checking whether -pthread is sufficient with -shared... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ok=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "x$ok" = xyes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi # # Linux gcc on some architectures such as mips/mipsel forgets # about -lpthread # if test x"$ok" = xno; then { $as_echo "$as_me:$LINENO: checking whether -lpthread fixes that" >&5 $as_echo_n "checking whether -lpthread fixes that... " >&6; } LIBS="-lpthread $PTHREAD_LIBS $save_LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ok=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "x$ok" = xyes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } PTHREAD_LIBS="-lpthread $PTHREAD_LIBS" else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi # # FreeBSD 4.10 gcc forgets to use -lc_r instead of -lc # if test x"$ok" = xno; then { $as_echo "$as_me:$LINENO: checking whether -lc_r fixes that" >&5 $as_echo_n "checking whether -lc_r fixes that... " >&6; } LIBS="-lc_r $PTHREAD_LIBS $save_LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ok=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext if test "x$ok" = xyes; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } PTHREAD_LIBS="-lc_r $PTHREAD_LIBS" else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi if test x"$ok" = xno; then # OK, we have run out of ideas { $as_echo "$as_me:$LINENO: WARNING: Impossible to determine how to use pthreads with shared libraries" >&5 $as_echo "$as_me: WARNING: Impossible to determine how to use pthreads with shared libraries" >&2;} # so it's not safe to assume that we may use pthreads acx_pthread_ok=no fi CFLAGS="$save_CFLAGS" LIBS="$save_LIBS" CC="$save_CC" fi else PTHREAD_CC="$CC" fi # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: if test x"$acx_pthread_ok" = xyes; then LIBS="$PTHREAD_LIBS $LIBS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" CC="$PTHREAD_CC" cat >>confdefs.h <<\_ACEOF #define HAVE_PTHREAD 1 _ACEOF : else acx_pthread_ok=no { { $as_echo "$as_me:$LINENO: error: no usable pthreads library found" >&5 $as_echo "$as_me: error: no usable pthreads library found" >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu for ac_func in sem_timedwait do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 $as_echo_n "checking how to run the C preprocessor... " >&6; } # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if test "${ac_cv_prog_CPP+set}" = set; then $as_echo_n "(cached) " >&6 else # Double quotes because CPP needs to be expanded for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" do ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then break fi done ac_cv_prog_CPP=$CPP fi CPP=$ac_cv_prog_CPP else ac_cv_prog_CPP=$CPP fi { $as_echo "$as_me:$LINENO: result: $CPP" >&5 $as_echo "$CPP" >&6; } ac_preproc_ok=false for ac_c_preproc_warn_flag in '' yes do # Use a header file that comes with gcc, so configuring glibc # with a fresh cross-compiler works. # Prefer to if __STDC__ is defined, since # exists even on freestanding compilers. # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. "Syntax error" is here to catch this case. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #ifdef __STDC__ # include #else # include #endif Syntax error _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Broken: fails on valid input. continue fi rm -f conftest.err conftest.$ac_ext # OK, works on sane cases. Now check whether nonexistent headers # can be detected and how. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then # Broken: success on invalid input. continue else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 # Passes both tests. ac_preproc_ok=: break fi rm -f conftest.err conftest.$ac_ext done # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. rm -f conftest.err conftest.$ac_ext if $ac_preproc_ok; then : else { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&5 $as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check See \`config.log' for more details." >&2;} { (exit 1); exit 1; }; } fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu { $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } if test "${ac_cv_path_GREP+set}" = set; then $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then ac_path_GREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in *GNU*) ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_GREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_GREP=$GREP fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" { $as_echo "$as_me:$LINENO: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } if test "${ac_cv_path_EGREP+set}" = set; then $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 then ac_cv_path_EGREP="$GREP -E" else if test -z "$EGREP"; then ac_path_EGREP_found=false # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in *GNU*) ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; *) ac_count=0 $as_echo_n 0123456789 >"conftest.in" while : do cat "conftest.in" "conftest.in" >"conftest.tmp" mv "conftest.tmp" "conftest.in" cp "conftest.in" "conftest.nl" $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ac_count=`expr $ac_count + 1` if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_max=$ac_count fi # 10*(2^10) chars as input seems more than enough test $ac_count -gt 10 && break done rm -f conftest.in conftest.tmp conftest.nl conftest.out;; esac $ac_path_EGREP_found && break 3 done done done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 $as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} { (exit 1); exit 1; }; } fi else ac_cv_path_EGREP=$EGREP fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" { $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi # On IRIX 5.3, sys/types and inttypes.h are conflicting. for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ inttypes.h stdint.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for mode_t" >&5 $as_echo_n "checking for mode_t... " >&6; } if test "${ac_cv_type_mode_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_mode_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (mode_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((mode_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_mode_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_mode_t" >&5 $as_echo "$ac_cv_type_mode_t" >&6; } if test $ac_cv_type_mode_t = yes; then : else cat >>confdefs.h <<_ACEOF #define mode_t int _ACEOF fi { $as_echo "$as_me:$LINENO: checking for size_t" >&5 $as_echo_n "checking for size_t... " >&6; } if test "${ac_cv_type_size_t+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_size_t=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (size_t)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((size_t))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_size_t=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 $as_echo "$ac_cv_type_size_t" >&6; } if test $ac_cv_type_size_t = yes; then : else cat >>confdefs.h <<_ACEOF #define size_t unsigned int _ACEOF fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 $as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include <$ac_hdr> int main () { if ((DIR *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF ac_header_dirent=$ac_hdr; break fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if test "${ac_cv_search_opendir+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' dir; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_opendir=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_opendir+set}" = set; then break fi done if test "${ac_cv_search_opendir+set}" = set; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi else { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if test "${ac_cv_search_opendir+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' x; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_opendir=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_opendir+set}" = set; then break fi done if test "${ac_cv_search_opendir+set}" = set; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi { $as_echo "$as_me:$LINENO: checking for d_namlen in struct dirent" >&5 $as_echo_n "checking for d_namlen in struct dirent... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #if HAVE_DIRENT_H # include #else # define dirent direct # if HAVE_SYS_NDIR_H # include # endif # if HAVE_SYS_DIR_H # include # endif # if HAVE_NDIR_H # include # endif #endif int main () { struct dirent dp; int X = dp.d_namlen; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >>confdefs.h <<\_ACEOF #define HAVE_STRUCT_DIRENT_D_NAMLEN 1 _ACEOF { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } if test "${ac_cv_header_stdc+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include #include int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdc=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "memchr" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "free" >/dev/null 2>&1; then : else ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #if ((' ' & 0x0FF) == 0x020) # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #else # define ISLOWER(c) \ (('a' <= (c) && (c) <= 'i') \ || ('j' <= (c) && (c) <= 'r') \ || ('s' <= (c) && (c) <= 'z')) # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) #endif #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) return 2; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then : else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) ac_cv_header_stdc=no fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then cat >>confdefs.h <<\_ACEOF #define STDC_HEADERS 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5 $as_echo_n "checking for stdbool.h that conforms to C99... " >&6; } if test "${ac_cv_header_stdbool_h+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifndef bool "error: bool is not defined" #endif #ifndef false "error: false is not defined" #endif #if false "error: false is not 0" #endif #ifndef true "error: true is not defined" #endif #if true != 1 "error: true is not 1" #endif #ifndef __bool_true_false_are_defined "error: __bool_true_false_are_defined is not defined" #endif struct s { _Bool s: 1; _Bool t; } s; char a[true == 1 ? 1 : -1]; char b[false == 0 ? 1 : -1]; char c[__bool_true_false_are_defined == 1 ? 1 : -1]; char d[(bool) 0.5 == true ? 1 : -1]; bool e = &s; char f[(_Bool) 0.0 == false ? 1 : -1]; char g[true]; char h[sizeof (_Bool)]; char i[sizeof s.t]; enum { j = false, k = true, l = false * true, m = true * 256 }; /* The following fails for HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ _Bool n[m]; char o[sizeof n == m * sizeof n[0] ? 1 : -1]; char p[-1 - (_Bool) 0 < 0 && -1 - (bool) 0 < 0 ? 1 : -1]; # if defined __xlc__ || defined __GNUC__ /* Catch a bug in IBM AIX xlc compiler version 6.0.0.0 reported by James Lemley on 2005-10-05; see http://lists.gnu.org/archive/html/bug-coreutils/2005-10/msg00086.html This test is not quite right, since xlc is allowed to reject this program, as the initializer for xlcbug is not one of the forms that C requires support for. However, doing the test right would require a runtime test, and that would make cross-compilation harder. Let us hope that IBM fixes the xlc bug, and also adds support for this kind of constant expression. In the meantime, this test will reject xlc, which is OK, since our stdbool.h substitute should suffice. We also test this with GCC, where it should work, to detect more quickly whether someone messes up the test in the future. */ char digs[] = "0123456789"; int xlcbug = 1 / (&(digs + 5)[-2 + (bool) 1] == &digs[4] ? 1 : -1); # endif /* Catch a bug in an HP-UX C compiler. See http://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html http://lists.gnu.org/archive/html/bug-coreutils/2005-11/msg00161.html */ _Bool q = true; _Bool *pq = &q; int main () { *pq |= q; *pq |= ! q; /* Refer to every declared value, to avoid compiler optimizations. */ return (!a + !b + !c + !d + !e + !f + !g + !h + !i + !!j + !k + !!l + !m + !n + !o + !p + !q + !pq); ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_stdbool_h=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_stdbool_h=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5 $as_echo "$ac_cv_header_stdbool_h" >&6; } { $as_echo "$as_me:$LINENO: checking for _Bool" >&5 $as_echo_n "checking for _Bool... " >&6; } if test "${ac_cv_type__Bool+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type__Bool=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof (_Bool)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default int main () { if (sizeof ((_Bool))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type__Bool=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5 $as_echo "$ac_cv_type__Bool" >&6; } if test $ac_cv_type__Bool = yes; then cat >>confdefs.h <<_ACEOF #define HAVE__BOOL 1 _ACEOF fi if test $ac_cv_header_stdbool_h = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_STDBOOL_H 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 $as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } if test "${ac_cv_header_time+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include int main () { if ((struct tm *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_header_time=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_header_time=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 $as_echo "$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then cat >>confdefs.h <<\_ACEOF #define TIME_WITH_SYS_TIME 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 $as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } if test "${ac_cv_struct_tm+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { struct tm tm; int *p = &tm.tm_sec; return !p; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_struct_tm=time.h else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_struct_tm=sys/time.h fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 $as_echo "$ac_cv_struct_tm" >&6; } if test $ac_cv_struct_tm = sys/time.h; then cat >>confdefs.h <<\_ACEOF #define TM_IN_SYS_TIME 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for struct tm.tm_zone" >&5 $as_echo_n "checking for struct tm.tm_zone... " >&6; } if test "${ac_cv_member_struct_tm_tm_zone+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include <$ac_cv_struct_tm> int main () { static struct tm ac_aggr; if (ac_aggr.tm_zone) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_struct_tm_tm_zone=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include <$ac_cv_struct_tm> int main () { static struct tm ac_aggr; if (sizeof ac_aggr.tm_zone) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_struct_tm_tm_zone=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_member_struct_tm_tm_zone=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_tm_tm_zone" >&5 $as_echo "$ac_cv_member_struct_tm_tm_zone" >&6; } if test $ac_cv_member_struct_tm_tm_zone = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_TM_TM_ZONE 1 _ACEOF fi if test "$ac_cv_member_struct_tm_tm_zone" = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_TM_ZONE 1 _ACEOF else { $as_echo "$as_me:$LINENO: checking whether tzname is declared" >&5 $as_echo_n "checking whether tzname is declared... " >&6; } if test "${ac_cv_have_decl_tzname+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { #ifndef tzname (void) tzname; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_have_decl_tzname=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_tzname=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_tzname" >&5 $as_echo "$ac_cv_have_decl_tzname" >&6; } if test $ac_cv_have_decl_tzname = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DECL_TZNAME 1 _ACEOF else cat >>confdefs.h <<_ACEOF #define HAVE_DECL_TZNAME 0 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for tzname" >&5 $as_echo_n "checking for tzname... " >&6; } if test "${ac_cv_var_tzname+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if !HAVE_DECL_TZNAME extern char *tzname[]; #endif int main () { return tzname[0][0]; ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_var_tzname=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_var_tzname=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_var_tzname" >&5 $as_echo "$ac_cv_var_tzname" >&6; } if test $ac_cv_var_tzname = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_TZNAME 1 _ACEOF fi fi for ac_header in arpa/inet.h ctype.h errno.h fcntl.h limits.h \ netinet/in.h stdarg.h stdio.h stdlib.h string.h sys/param.h sys/time.h \ sys/types.h sys/socket.h sys/stat.h sys/un.h syslog.h sysexits.h unistd.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi if test `eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF else { { $as_echo "$as_me:$LINENO: error: unable to find required header files" >&5 $as_echo "$as_me: error: unable to find required header files" >&2;} { (exit 1); exit 1; }; } fi done { $as_echo "$as_me:$LINENO: checking for sem_init in -lrt" >&5 $as_echo_n "checking for sem_init in -lrt... " >&6; } if test "${ac_cv_lib_rt_sem_init+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lrt $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char sem_init (); int main () { return sem_init (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_rt_sem_init=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_rt_sem_init=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_rt_sem_init" >&5 $as_echo "$ac_cv_lib_rt_sem_init" >&6; } if test $ac_cv_lib_rt_sem_init = yes; then LIBS="$LIBS -lrt" fi { $as_echo "$as_me:$LINENO: checking if POSIX semaphores are working" >&5 $as_echo_n "checking if POSIX semaphores are working... " >&6; } if test "$cross_compiling" = yes; then { { $as_echo "$as_me:$LINENO: error: no" >&5 $as_echo "$as_me: error: no" >&2;} { (exit 1); exit 1; }; } else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main() { sem_t sem; int rc; rc = sem_init(&sem, 0, 0); return rc; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ( exit $ac_status ) { { $as_echo "$as_me:$LINENO: error: no" >&5 $as_echo "$as_me: error: no" >&2;} { (exit 1); exit 1; }; } fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi for ac_header in fts.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi if test `eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in arc4random do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done for ac_func in daemon fts_open mkdtemp strlcpy do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF else case " $LIBOBJS " in *" $ac_func.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;; esac fi done { $as_echo "$as_me:$LINENO: checking for inet_ntop" >&5 $as_echo_n "checking for inet_ntop... " >&6; } if test "${ac_cv_func_inet_ntop+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define inet_ntop to an innocuous variant, in case declares inet_ntop. For example, HP-UX 11i declares gettimeofday. */ #define inet_ntop innocuous_inet_ntop /* System header to define __stub macros and hopefully few prototypes, which can conflict with char inet_ntop (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef inet_ntop /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char inet_ntop (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_inet_ntop || defined __stub___inet_ntop choke me #endif int main () { return inet_ntop (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_inet_ntop=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_inet_ntop=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_inet_ntop" >&5 $as_echo "$ac_cv_func_inet_ntop" >&6; } if test $ac_cv_func_inet_ntop = yes; then : else { $as_echo "$as_me:$LINENO: checking for library containing inet_ntop" >&5 $as_echo_n "checking for library containing inet_ntop... " >&6; } if test "${ac_cv_search_inet_ntop+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char inet_ntop (); int main () { return inet_ntop (); ; return 0; } _ACEOF for ac_lib in '' nsl; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_inet_ntop=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_inet_ntop+set}" = set; then break fi done if test "${ac_cv_search_inet_ntop+set}" = set; then : else ac_cv_search_inet_ntop=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_inet_ntop" >&5 $as_echo "$ac_cv_search_inet_ntop" >&6; } ac_res=$ac_cv_search_inet_ntop if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi ac_header_dirent=no for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5 $as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include <$ac_hdr> int main () { if ((DIR *) 0) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then eval "$as_ac_Header=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_Header=no" fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 _ACEOF ac_header_dirent=$ac_hdr; break fi done # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. if test $ac_header_dirent = dirent.h; then { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if test "${ac_cv_search_opendir+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' dir; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_opendir=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_opendir+set}" = set; then break fi done if test "${ac_cv_search_opendir+set}" = set; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi else { $as_echo "$as_me:$LINENO: checking for library containing opendir" >&5 $as_echo_n "checking for library containing opendir... " >&6; } if test "${ac_cv_search_opendir+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char opendir (); int main () { return opendir (); ; return 0; } _ACEOF for ac_lib in '' x; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_opendir=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_opendir+set}" = set; then break fi done if test "${ac_cv_search_opendir+set}" = set; then : else ac_cv_search_opendir=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5 $as_echo "$ac_cv_search_opendir" >&6; } ac_res=$ac_cv_search_opendir if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi { $as_echo "$as_me:$LINENO: checking for DIR.d_fd" >&5 $as_echo_n "checking for DIR.d_fd... " >&6; } if test "${ac_cv_member_DIR_d_fd+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static DIR ac_aggr; if (ac_aggr.d_fd) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_DIR_d_fd=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static DIR ac_aggr; if (sizeof ac_aggr.d_fd) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_DIR_d_fd=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_member_DIR_d_fd=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_member_DIR_d_fd" >&5 $as_echo "$ac_cv_member_DIR_d_fd" >&6; } if test $ac_cv_member_DIR_d_fd = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DIR_D_FD 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for DIR.dd_fd" >&5 $as_echo_n "checking for DIR.dd_fd... " >&6; } if test "${ac_cv_member_DIR_dd_fd+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static DIR ac_aggr; if (ac_aggr.dd_fd) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_DIR_dd_fd=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static DIR ac_aggr; if (sizeof ac_aggr.dd_fd) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_DIR_dd_fd=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_member_DIR_dd_fd=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_member_DIR_dd_fd" >&5 $as_echo "$ac_cv_member_DIR_dd_fd" >&6; } if test $ac_cv_member_DIR_dd_fd = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DIR_DD_FD 1 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for DIR.__dd_fd" >&5 $as_echo_n "checking for DIR.__dd_fd... " >&6; } if test "${ac_cv_member_DIR___dd_fd+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static DIR ac_aggr; if (ac_aggr.__dd_fd) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_DIR___dd_fd=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include int main () { static DIR ac_aggr; if (sizeof ac_aggr.__dd_fd) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_member_DIR___dd_fd=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_member_DIR___dd_fd=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_member_DIR___dd_fd" >&5 $as_echo "$ac_cv_member_DIR___dd_fd" >&6; } if test $ac_cv_member_DIR___dd_fd = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DIR___DD_FD 1 _ACEOF fi for ac_func in dirfd do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done if test "$ac_cv_func_dirfd" = no; then { $as_echo "$as_me:$LINENO: checking whether dirfd is a macro" >&5 $as_echo_n "checking whether dirfd is a macro... " >&6; } if test "${ac_cv_func_dirfd_macro+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if defined(dirfd) func_dirfd_macro #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "func_dirfd_macro" >/dev/null 2>&1; then ac_cv_func_dirfd_macro=yes else ac_cv_func_dirfd_macro=no fi rm -f conftest* fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_dirfd_macro" >&5 $as_echo "$ac_cv_func_dirfd_macro" >&6; } fi if test "$ac_cv_func_dirfd_macro" = yes; then cat >>confdefs.h <<\_ACEOF #define HAVE_DIRFD_AS_MACRO 1 _ACEOF fi # Used to indicate success or failure of this function. ax_path_milter_ok=no # Convert sections of MINIMUM-VERSION to three digit numbers by adding zeros. # For example 8.12.9 would become 008.012.009 ac_milter_minimum_version=`echo "8.12" | sed 's,\([0-9]*\),x\1x,g;s,x\([0-9]\)x,x0\1x,g;s,x\([0-9][0-9]\)x,x0\1x,g;s,x,,g'` # Add options --with-sendmail --with-sendmail-base and --with-sendmail-obj # to configure. # Check whether --with-sendmail was given. if test "${with_sendmail+set}" = set; then withval=$with_sendmail; fi # Check whether --with-sendmail-base was given. if test "${with_sendmail_base+set}" = set; then withval=$with_sendmail_base; fi # Check whether --with-sendmail-obj was given. if test "${with_sendmail_obj+set}" = set; then withval=$with_sendmail_obj; fi # Check for functions required by libmilter. { $as_echo "$as_me:$LINENO: checking for inet_aton" >&5 $as_echo_n "checking for inet_aton... " >&6; } if test "${ac_cv_func_inet_aton+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define inet_aton to an innocuous variant, in case declares inet_aton. For example, HP-UX 11i declares gettimeofday. */ #define inet_aton innocuous_inet_aton /* System header to define __stub macros and hopefully few prototypes, which can conflict with char inet_aton (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef inet_aton /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char inet_aton (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_inet_aton || defined __stub___inet_aton choke me #endif int main () { return inet_aton (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_inet_aton=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_inet_aton=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_inet_aton" >&5 $as_echo "$ac_cv_func_inet_aton" >&6; } if test $ac_cv_func_inet_aton = yes; then : else { $as_echo "$as_me:$LINENO: checking for library containing inet_aton" >&5 $as_echo_n "checking for library containing inet_aton... " >&6; } if test "${ac_cv_search_inet_aton+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char inet_aton (); int main () { return inet_aton (); ; return 0; } _ACEOF for ac_lib in '' socket nsl resolv; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_inet_aton=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_inet_aton+set}" = set; then break fi done if test "${ac_cv_search_inet_aton+set}" = set; then : else ac_cv_search_inet_aton=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_inet_aton" >&5 $as_echo "$ac_cv_search_inet_aton" >&6; } ac_res=$ac_cv_search_inet_aton if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi { $as_echo "$as_me:$LINENO: checking for socket" >&5 $as_echo_n "checking for socket... " >&6; } if test "${ac_cv_func_socket+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define socket to an innocuous variant, in case declares socket. For example, HP-UX 11i declares gettimeofday. */ #define socket innocuous_socket /* System header to define __stub macros and hopefully few prototypes, which can conflict with char socket (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef socket /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char socket (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_socket || defined __stub___socket choke me #endif int main () { return socket (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_socket=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_socket=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_socket" >&5 $as_echo "$ac_cv_func_socket" >&6; } if test $ac_cv_func_socket = yes; then : else { $as_echo "$as_me:$LINENO: checking for library containing socket" >&5 $as_echo_n "checking for library containing socket... " >&6; } if test "${ac_cv_search_socket+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char socket (); int main () { return socket (); ; return 0; } _ACEOF for ac_lib in '' socket nsl; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_socket=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_socket+set}" = set; then break fi done if test "${ac_cv_search_socket+set}" = set; then : else ac_cv_search_socket=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_socket" >&5 $as_echo "$ac_cv_search_socket" >&6; } ac_res=$ac_cv_search_socket if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi { $as_echo "$as_me:$LINENO: checking for gethostbyname" >&5 $as_echo_n "checking for gethostbyname... " >&6; } if test "${ac_cv_func_gethostbyname+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define gethostbyname to an innocuous variant, in case declares gethostbyname. For example, HP-UX 11i declares gettimeofday. */ #define gethostbyname innocuous_gethostbyname /* System header to define __stub macros and hopefully few prototypes, which can conflict with char gethostbyname (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef gethostbyname /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char gethostbyname (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_gethostbyname || defined __stub___gethostbyname choke me #endif int main () { return gethostbyname (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_func_gethostbyname=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_func_gethostbyname=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 $as_echo "$ac_cv_func_gethostbyname" >&6; } if test $ac_cv_func_gethostbyname = yes; then : else { $as_echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5 $as_echo_n "checking for library containing gethostbyname... " >&6; } if test "${ac_cv_search_gethostbyname+set}" = set; then $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char gethostbyname (); int main () { return gethostbyname (); ; return 0; } _ACEOF for ac_lib in '' socket nsl; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_search_gethostbyname=$ac_res else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext if test "${ac_cv_search_gethostbyname+set}" = set; then break fi done if test "${ac_cv_search_gethostbyname+set}" = set; then : else ac_cv_search_gethostbyname=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5 $as_echo "$ac_cv_search_gethostbyname" >&6; } ac_res=$ac_cv_search_gethostbyname if test "$ac_res" != no; then test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi fi # Check if the linker accepts --rpath (for Darwin) { $as_echo "$as_me:$LINENO: checking if ld accepts --rpath" >&5 $as_echo_n "checking if ld accepts --rpath... " >&6; } SAVEDLDFLAGS=$LDFLAGS LDFLAGS=$LDFLAGS" -Wl,--rpath=/" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ int main () { ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then rpath="--rpath="; ldrpath=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 rpath="-L"; ldrpath=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LDFLAGS=$SAVEDLDFLAGS { $as_echo "$as_me:$LINENO: result: $ldrpath" >&5 $as_echo "$ldrpath" >&6; } ############################################################################### # # If neither --with-sendmail-base or --with-sendmail-obj is specified # check the existing environment first for mfapi.h and libmilter without # modifying CPPFLAGS, LDFLAGS, and LIBS first. # if test "x$with_sendmail_base$with_sendmail_obj" = "x" ; then if test "x$with_sendmail" != "x" ; then CPPFLAGS="$CPPFLAGS -I$with_sendmail/include" LDFLAGS="$LDFLAGS -L$with_sendmail/lib -Wl,$rpath$with_sendmail/lib" { $as_echo "$as_me:$LINENO: checking for sendmail install directory" >&5 $as_echo_n "checking for sendmail install directory... " >&6; } { $as_echo "$as_me:$LINENO: result: $with_sendmail" >&5 $as_echo "$with_sendmail" >&6; } else { $as_echo "$as_me:$LINENO: checking for sendmail install directory" >&5 $as_echo_n "checking for sendmail install directory... " >&6; } { $as_echo "$as_me:$LINENO: result: default" >&5 $as_echo "default" >&6; } fi if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then { $as_echo "$as_me:$LINENO: checking for libmilter/mfapi.h" >&5 $as_echo_n "checking for libmilter/mfapi.h... " >&6; } if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then $as_echo_n "(cached) " >&6 fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_libmilter_mfapi_h" >&5 $as_echo "$ac_cv_header_libmilter_mfapi_h" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking libmilter/mfapi.h usability" >&5 $as_echo_n "checking libmilter/mfapi.h usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking libmilter/mfapi.h presence" >&5 $as_echo_n "checking libmilter/mfapi.h presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for libmilter/mfapi.h" >&5 $as_echo_n "checking for libmilter/mfapi.h... " >&6; } if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_header_libmilter_mfapi_h=$ac_header_preproc fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_libmilter_mfapi_h" >&5 $as_echo "$ac_cv_header_libmilter_mfapi_h" >&6; } fi if test $ac_cv_header_libmilter_mfapi_h = yes; then { $as_echo "$as_me:$LINENO: checking for smfi_main in -lmilter" >&5 $as_echo_n "checking for smfi_main in -lmilter... " >&6; } if test "${ac_cv_lib_milter_smfi_main+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lmilter $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char smfi_main (); int main () { return smfi_main (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_milter_smfi_main=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_milter_smfi_main=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_milter_smfi_main" >&5 $as_echo "$ac_cv_lib_milter_smfi_main" >&6; } if test $ac_cv_lib_milter_smfi_main = yes; then # both tests succeeded so indicate success ax_path_milter_ok=yes # add -lmilter to the libraries to link MILTER_LIBS="-lmilter" fi fi # Debian use for libmilter.a /usr/lib/libmilter instead of /usr/lib if test "$ax_path_milter_ok" = "no" ; then unset ac_cv_lib_milter_smfi_main ac_milter_save_LDFLAGS="$LDLFAGS" MILTER_LDFLAGS="-L/usr/lib/libmilter" LDFLAGS="$MILTER_LDFLAGS $LDFLAGS" if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then { $as_echo "$as_me:$LINENO: checking for libmilter/mfapi.h" >&5 $as_echo_n "checking for libmilter/mfapi.h... " >&6; } if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then $as_echo_n "(cached) " >&6 fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_libmilter_mfapi_h" >&5 $as_echo "$ac_cv_header_libmilter_mfapi_h" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking libmilter/mfapi.h usability" >&5 $as_echo_n "checking libmilter/mfapi.h usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking libmilter/mfapi.h presence" >&5 $as_echo_n "checking libmilter/mfapi.h presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for libmilter/mfapi.h" >&5 $as_echo_n "checking for libmilter/mfapi.h... " >&6; } if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_header_libmilter_mfapi_h=$ac_header_preproc fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_libmilter_mfapi_h" >&5 $as_echo "$ac_cv_header_libmilter_mfapi_h" >&6; } fi if test $ac_cv_header_libmilter_mfapi_h = yes; then { $as_echo "$as_me:$LINENO: checking for smfi_main in -lmilter" >&5 $as_echo_n "checking for smfi_main in -lmilter... " >&6; } if test "${ac_cv_lib_milter_smfi_main+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lmilter $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char smfi_main (); int main () { return smfi_main (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_milter_smfi_main=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_milter_smfi_main=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_milter_smfi_main" >&5 $as_echo "$ac_cv_lib_milter_smfi_main" >&6; } if test $ac_cv_lib_milter_smfi_main = yes; then # both tests succeeded so indicate success ax_path_milter_ok=yes # add -lmilter to the libraries to link MILTER_LIBS="-lmilter" fi fi LDFLAGS="$ac_milter_save_LDFLAGS" fi if test "$ax_path_milter_ok" = "no" ; then # Unset the cached test results because we will be trying them again later. ac_milter_tmp=abcdefg if unset ac_milter_tmp 2> /dev/null ; then unset ac_cv_header_libmilter_mfapi_h unset ac_cv_lib_milter_smfi_main else { $as_echo "$as_me:$LINENO: WARNING: system doesn't have unset so either use --with-sendmail-base or set LDFLAGS and CPPFLAGS with the necessary -L and -I options" >&5 $as_echo "$as_me: WARNING: system doesn't have unset so either use --with-sendmail-base or set LDFLAGS and CPPFLAGS with the necessary -L and -I options" >&2;} fi fi fi ############################################################################### # # If didn't already fine necessary files then search. # if test "$ax_path_milter_ok" = "no" ; then ############################################################################# # # Determine the sendmail base directory and set SENDMAIL_BASE_DIR. # if test "x$with_sendmail_base" != "x" ; then { $as_echo "$as_me:$LINENO: checking for sendmail base directory" >&5 $as_echo_n "checking for sendmail base directory... " >&6; } # set SENDMAIL_BASE_DIR to the one specified by--with-sendmail-base SENDMAIL_BASE_DIR="$with_sendmail_base" { $as_echo "$as_me:$LINENO: result: $SENDMAIL_BASE_DIR" >&5 $as_echo "$SENDMAIL_BASE_DIR" >&6; } else { $as_echo "$as_me:$LINENO: checking for sendmail base directory in ../ " >&5 $as_echo_n "checking for sendmail base directory in ../ ... " >&6; } # # --with-sendmail-base is not used, so we will try to determine it # # 1) List all directories one level down that look like sendmail. # 2) Select ones that are sendmail 8.12 or higher (including 8.13 # versions when they come out). # 3) Replace any single digit last version numbers with a two digit # version number (ie. 8.12.9 becomes 8.12.09). # 4) Sort all of the directories found in reverse order. # 5) Take the first one (the highest version). # 6) Restore the single digit version numbers. # ac_milter_tmp=`ls -d ../sendmail-8.1* 2> /dev/null | grep '../sendmail-8.1[2-9]' | sed 's,\.\([0-9]\)$,.0\1,' | sort -r | sed '1q' | sed 's,\.0\([0-9]\)$,.\1,'` # Convert found version sections to three digit numbers by adding zeros. ac_milter_found_version=`echo "$ac_milter_tmp" | sed 's,.*/sendmail-,,;s,\([0-9]*\),x\1x,g;s,x\([0-9]\)x,x0\1x,g;s,x\([0-9][0-9]\)x,x0\1x,g;s,x,,g'` # If ac_milter_minimum_version is equal to ac_milter_lower_version, then # the found version is greater than or equal to the minumum version. # Pick the version string that is the lesser of the two. # An empty string would be less than anything. # In short, ac_milter_version_ok will equal yes if the version is ok, # and no otherwise. ac_milter_version_ok=`echo "x$ac_milter_minimum_version x$ac_milter_found_version" | sort | sed '1q' | sed "s,x${ac_milter_minimum_version},yes,;s,x${ac_milter_found_version},no," ` # If we have something add the current directory to it. if test "x$ac_milter_tmp" != "x" ; then ac_milter_tmp="`pwd`/$ac_milter_tmp" fi if test -r "${ac_milter_tmp}/include/libmilter/mfapi.h" && \ test "$ac_milter_version_ok" = "yes" ; then # The file mfapi.h exists so we will use this as SENDMAIL_BASE_DIR. SENDMAIL_BASE_DIR="$ac_milter_tmp" { $as_echo "$as_me:$LINENO: result: $SENDMAIL_BASE_DIR" >&5 $as_echo "$SENDMAIL_BASE_DIR" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } { $as_echo "$as_me:$LINENO: checking for sendmail base from /etc/mail/sendmail.cf" >&5 $as_echo_n "checking for sendmail base from /etc/mail/sendmail.cf... " >&6; } # # The previous method to find SENDMAIL_BASE_DIR failed, so we will # try this method. # # 1) Check for a line in /etc/mail/sendmail.cf of the form: # ##### in /some/path/sendmail-8.x.x/more/path # This is the directory that the sendmail.cf file was built in. # 2) Take the first occurrence if there are more than one. # 3) Remove the leading "##### in ". # 4) Remove everything after the sendmail-8.x.x path component. # ac_milter_tmp=`grep "^##### in /" /etc/mail/sendmail.cf 2> /dev/null | grep "/sendmail-8.1" | sed '1q' | sed 's,^##### in ,,' | sed 's,\(/sendmail-8\.[0-9.]*\).*,\1,'` # Convert found version sections to three digit numbers by adding zeros. ac_milter_found_version=`echo "$ac_milter_tmp" | sed 's,.*/sendmail-,,;s,\([0-9]*\),x\1x,g;s,x\([0-9]\)x,x0\1x,g;s,x\([0-9][0-9]\)x,x0\1x,g;s,x,,g'` # ac_milter_version_ok will equal yes if the version is ok, otherwise no. ac_milter_version_ok=`echo "x$ac_milter_minimum_version x$ac_milter_found_version" | sort | sed '1q' | sed "s,x${ac_milter_minimum_version},yes,;s,x${ac_milter_found_version},no," ` if test -r "${ac_milter_tmp}/include/libmilter/mfapi.h" && \ test "$ac_milter_version_ok" = "yes" ; then # The file mfapi.h exists so we will use this as SENDMAIL_BASE_DIR. SENDMAIL_BASE_DIR="$ac_milter_tmp" { $as_echo "$as_me:$LINENO: result: $SENDMAIL_BASE_DIR" >&5 $as_echo "$SENDMAIL_BASE_DIR" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi fi ############################################################################# # # Determine the sendmail obj.* directory and set SENDMAIL_OBJ_DIR. # We can only do this if we found SENDMAIL_BASE_DIR. # if test "x$SENDMAIL_BASE_DIR" != "x" ; then if test "x$with_sendmail_obj" != "x" ; then # set SENDMAIL_OBJ_DIR to the one specified by--with-sendmail-obj SENDMAIL_OBJ_DIR="$with_sendmail_obj" else { $as_echo "$as_me:$LINENO: checking for sendmail obj.* subdirectory using Build -M" >&5 $as_echo_n "checking for sendmail obj.* subdirectory using Build -M... " >&6; } # # --with-sendmail-obj is not used, so we will try to determine it # # Try to run sendmail's Build program with the -M option which will # print out the name of the obj. directory for the tool in the # directory where it is run from. # ac_milter_tmp=`(cd ${SENDMAIL_BASE_DIR}/libmilter 1> /dev/null ; ./Build -M ) 2> /dev/null` if test -f "${ac_milter_tmp}/libmilter.a" ; then # libmilter.a exists so this is the one we will choose # Remove beginning and end of path from obj.* directory. SENDMAIL_OBJ_DIR=`echo "$ac_milter_tmp" | sed 's,/libmilter$,,;s,.*/,,'` { $as_echo "$as_me:$LINENO: result: ${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}" >&5 $as_echo "${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } { $as_echo "$as_me:$LINENO: checking for sendmail obj.* subdirectory using ls" >&5 $as_echo_n "checking for sendmail obj.* subdirectory using ls... " >&6; } # # List all directories of the form "obj." in the sendmail base # directory, and choose the one with the latest modification date. # ac_milter_tmp=`ls -dt ${SENDMAIL_BASE_DIR}/obj.*/libmilter 2> /dev/null | sed '1q'` if test -f "${ac_milter_tmp}/libmilter.a" ; then # libmilter.a exists so this is the one we will choose # Remove beginning and end of path from obj.* directory. SENDMAIL_OBJ_DIR=`echo "$ac_milter_tmp" | sed 's,/libmilter$,,;s,.*/,,'` { $as_echo "$as_me:$LINENO: result: ${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}" >&5 $as_echo "${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}" >&6; } else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } fi fi fi fi ############################################################################# # # If we have both SENDMAIL_BASE_DIR and SENDMAIL_OBJ_DIR we will check # for the necessary files. # if test "x$SENDMAIL_BASE_DIR" != "x" && \ test "x$SENDMAIL_OBJ_DIR" != "x" ; then # Save and modify CPPFLAGS. ac_milter_save_CPPFLAGS="$CPPFLAGS" MILTER_CPPFLAGS="-I$SENDMAIL_BASE_DIR/include" CPPFLAGS="$CPPFLAGS $MILTER_CPPFLAGS" # Save and modify LDFLAGS. ac_milter_save_LDFLAGS="$LDLFAGS" MILTER_LDFLAGS="-L${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}/libmilter" LDFLAGS="$MILTER_LDFLAGS $LDFLAGS" if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then { $as_echo "$as_me:$LINENO: checking for libmilter/mfapi.h" >&5 $as_echo_n "checking for libmilter/mfapi.h... " >&6; } if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then $as_echo_n "(cached) " >&6 fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_libmilter_mfapi_h" >&5 $as_echo "$ac_cv_header_libmilter_mfapi_h" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking libmilter/mfapi.h usability" >&5 $as_echo_n "checking libmilter/mfapi.h usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking libmilter/mfapi.h presence" >&5 $as_echo_n "checking libmilter/mfapi.h presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: libmilter/mfapi.h: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: libmilter/mfapi.h: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for libmilter/mfapi.h" >&5 $as_echo_n "checking for libmilter/mfapi.h... " >&6; } if test "${ac_cv_header_libmilter_mfapi_h+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_header_libmilter_mfapi_h=$ac_header_preproc fi { $as_echo "$as_me:$LINENO: result: $ac_cv_header_libmilter_mfapi_h" >&5 $as_echo "$ac_cv_header_libmilter_mfapi_h" >&6; } fi if test $ac_cv_header_libmilter_mfapi_h = yes; then { $as_echo "$as_me:$LINENO: checking for smfi_main in -lmilter" >&5 $as_echo_n "checking for smfi_main in -lmilter... " >&6; } if test "${ac_cv_lib_milter_smfi_main+set}" = set; then $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lmilter $LIBS" cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char smfi_main (); int main () { return smfi_main (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then ac_cv_lib_milter_smfi_main=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_lib_milter_smfi_main=no fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi { $as_echo "$as_me:$LINENO: result: $ac_cv_lib_milter_smfi_main" >&5 $as_echo "$ac_cv_lib_milter_smfi_main" >&6; } if test $ac_cv_lib_milter_smfi_main = yes; then # both tests succeeded so add -lmilter to the libraries to link MILTER_LIBS="-lmilter" # indicate success ax_path_milter_ok=yes fi fi # Restore the modified environment CPPFLAGS="$ac_milter_save_CPPFLAGS" LDFLAGS="$ac_milter_save_LDFLAGS" fi fi # If failure, clear MILTER_LIBS, MILTER_LDFLAGS and MILTER_CPPFLAGS. if test "$ax_path_milter_ok" = "no" ; then MILTER_CPPFLAGS="" MILTER_LIBS="" MILTER_LDFLAGS="" fi # export these to the make environment # Indicate status of checking for libmilter stuff. { $as_echo "$as_me:$LINENO: checking if files required by libmilter are present" >&5 $as_echo_n "checking if files required by libmilter are present... " >&6; } # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND. if test "$ax_path_milter_ok" = "yes" ; then { $as_echo "$as_me:$LINENO: result: yes" >&5 $as_echo "yes" >&6; } LIBS="$MILTER_LIBS $LIBS" LDFLAGS="$MILTER_LDFLAGS $LDFLAGS" CPPFLAGS="$CPPFLAGS $MILTER_CPPFLAGS" else { $as_echo "$as_me:$LINENO: result: no" >&5 $as_echo "no" >&6; } { { $as_echo "$as_me:$LINENO: error: required milter library and header not found" >&5 $as_echo "$as_me: error: required milter library and header not found" >&2;} { (exit 1); exit 1; }; } fi for ac_func in smfi_insheader smfi_opensocket smfi_progress smfi_quarantine \ smfi_setbacklog do as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` { $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 $as_echo_n "checking for $ac_func... " >&6; } if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ /* Define $ac_func to an innocuous variant, in case declares $ac_func. For example, HP-UX 11i declares gettimeofday. */ #define $ac_func innocuous_$ac_func /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func (); below. Prefer to if __STDC__ is defined, since exists even on freestanding compilers. */ #ifdef __STDC__ # include #else # include #endif #undef $ac_func /* Override any GCC internal prototype to avoid an error. Use char because int might match the return type of a GCC builtin and then its argument prototype would still apply. */ #ifdef __cplusplus extern "C" #endif char $ac_func (); /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined __stub_$ac_func || defined __stub___$ac_func choke me #endif int main () { return $ac_func (); ; return 0; } _ACEOF rm -f conftest.$ac_objext conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest$ac_exeext && { test "$cross_compiling" = yes || $as_test_x conftest$ac_exeext }; then eval "$as_ac_var=yes" else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 eval "$as_ac_var=no" fi rm -rf conftest.dSYM rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ conftest$ac_exeext conftest.$ac_ext fi ac_res=`eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } if test `eval 'as_val=${'$as_ac_var'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF fi done for ac_header in wchar.h do as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } else # Is the header compilable? { $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 $as_echo_n "checking $ac_header usability... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ $ac_includes_default #include <$ac_header> _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_header_compiler=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_compiler=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 $as_echo "$ac_header_compiler" >&6; } # Is the header present? { $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 $as_echo_n "checking $ac_header presence... " >&6; } cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include <$ac_header> _ACEOF if { (ac_try="$ac_cpp conftest.$ac_ext" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } >/dev/null && { test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || test ! -s conftest.err }; then ac_header_preproc=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_header_preproc=no fi rm -f conftest.err conftest.$ac_ext { $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 $as_echo "$ac_header_preproc" >&6; } # So? What about this header? case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in yes:no: ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 $as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} ac_header_preproc=yes ;; no:yes:* ) { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 $as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 $as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 $as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 $as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 $as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 $as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} ;; esac { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 $as_echo_n "checking for $ac_header... " >&6; } if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then $as_echo_n "(cached) " >&6 else eval "$as_ac_Header=\$ac_header_preproc" fi ac_res=`eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 $as_echo "$ac_res" >&6; } fi if test `eval 'as_val=${'$as_ac_Header'} $as_echo "$as_val"'` = yes; then cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF fi done { $as_echo "$as_me:$LINENO: checking for EILSEQ" >&5 $as_echo_n "checking for EILSEQ... " >&6; } if test "${ac_cv_decl_EILSEQ+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifdef EILSEQ yes #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "yes" >/dev/null 2>&1; then have_eilseq=1 fi rm -f conftest* if test -n "$have_eilseq"; then ac_cv_decl_EILSEQ=yes else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_WCHAR_H #include #endif #ifdef EILSEQ yes #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "yes" >/dev/null 2>&1; then have_eilseq=1 fi rm -f conftest* if test -n "$have_eilseq"; then if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_WCHAR_H #include #endif /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((EILSEQ) >= 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_lo=0 ac_mid=0 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_WCHAR_H #include #endif /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((EILSEQ) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_hi=$ac_mid; break else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr $ac_mid + 1` if test $ac_lo -le $ac_mid; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid + 1` fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_WCHAR_H #include #endif /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((EILSEQ) < 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_hi=-1 ac_mid=-1 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_WCHAR_H #include #endif /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((EILSEQ) >= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_lo=$ac_mid; break else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_hi=`expr '(' $ac_mid ')' - 1` if test $ac_mid -le $ac_hi; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid` fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo= ac_hi= fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_WCHAR_H #include #endif /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((EILSEQ) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_hi=$ac_mid else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr '(' $ac_mid ')' + 1` fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in ?*) ac_cv_decl_EILSEQ=$ac_lo;; '') ;; esac else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #if HAVE_WCHAR_H #include #endif /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include static long int longval () { return EILSEQ; } static unsigned long int ulongval () { return EILSEQ; } #include #include int main () { FILE *f = fopen ("conftest.val", "w"); if (! f) return 1; if ((EILSEQ) < 0) { long int i = longval (); if (i != (EILSEQ)) return 1; fprintf (f, "%ld", i); } else { unsigned long int i = ulongval (); if (i != (EILSEQ)) return 1; fprintf (f, "%lu", i); } /* Do not output a trailing newline, as this causes \r\n confusion on some platforms. */ return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then ac_cv_decl_EILSEQ=`cat conftest.val` else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi rm -f conftest.val else ac_cv_decl_EILSEQ=EINVAL fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_decl_EILSEQ" >&5 $as_echo "$ac_cv_decl_EILSEQ" >&6; } if test "$ac_cv_decl_EILSEQ" != yes; then cat >>confdefs.h <<_ACEOF #define EILSEQ $ac_cv_decl_EILSEQ _ACEOF EILSEQ="$ac_cv_decl_EILSEQ" fi { $as_echo "$as_me:$LINENO: checking for EOVERFLOW" >&5 $as_echo_n "checking for EOVERFLOW... " >&6; } if test "${ac_cv_decl_EOVERFLOW+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #ifdef EOVERFLOW yes #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "yes" >/dev/null 2>&1; then have_eoverflow=1 fi rm -f conftest* if test -n "$have_eoverflow"; then ac_cv_decl_EOVERFLOW=yes else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _XOPEN_SOURCE_EXTENDED 1 #include #ifdef EOVERFLOW yes #endif _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | $EGREP "yes" >/dev/null 2>&1; then have_eoverflow=1 fi rm -f conftest* if test -n "$have_eoverflow"; then if test "$cross_compiling" = yes; then # Depending upon the size, compute the lo and hi bounds. cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _XOPEN_SOURCE_EXTENDED 1 #include /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((ac_cv_decl_EOVERFLOW) >= 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_lo=0 ac_mid=0 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _XOPEN_SOURCE_EXTENDED 1 #include /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((ac_cv_decl_EOVERFLOW) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_hi=$ac_mid; break else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr $ac_mid + 1` if test $ac_lo -le $ac_mid; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid + 1` fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _XOPEN_SOURCE_EXTENDED 1 #include /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((ac_cv_decl_EOVERFLOW) < 0)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_hi=-1 ac_mid=-1 while :; do cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _XOPEN_SOURCE_EXTENDED 1 #include /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((ac_cv_decl_EOVERFLOW) >= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_lo=$ac_mid; break else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_hi=`expr '(' $ac_mid ')' - 1` if test $ac_mid -le $ac_hi; then ac_lo= ac_hi= break fi ac_mid=`expr 2 '*' $ac_mid` fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo= ac_hi= fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext # Binary search between lo and hi bounds. while test "x$ac_lo" != "x$ac_hi"; do ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _XOPEN_SOURCE_EXTENDED 1 #include /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include int main () { static int test_array [1 - 2 * !((ac_cv_decl_EOVERFLOW) <= $ac_mid)]; test_array [0] = 0 ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_hi=$ac_mid else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_lo=`expr '(' $ac_mid ')' + 1` fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext done case $ac_lo in ?*) EOVERFLOW=$ac_lo;; '') ;; esac else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #define _XOPEN_SOURCE_EXTENDED 1 #include /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include static long int longval () { return ac_cv_decl_EOVERFLOW; } static unsigned long int ulongval () { return ac_cv_decl_EOVERFLOW; } #include #include int main () { FILE *f = fopen ("conftest.val", "w"); if (! f) return 1; if ((ac_cv_decl_EOVERFLOW) < 0) { long int i = longval (); if (i != (ac_cv_decl_EOVERFLOW)) return 1; fprintf (f, "%ld", i); } else { unsigned long int i = ulongval (); if (i != (ac_cv_decl_EOVERFLOW)) return 1; fprintf (f, "%lu", i); } /* Do not output a trailing newline, as this causes \r\n confusion on some platforms. */ return ferror (f) || fclose (f) != 0; ; return 0; } _ACEOF rm -f conftest$ac_exeext if { (ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_link") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { ac_try='./conftest$ac_exeext' { (case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_try") 2>&5 ac_status=$? $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then EOVERFLOW=`cat conftest.val` else $as_echo "$as_me: program exited with status $ac_status" >&5 $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -rf conftest.dSYM rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext fi rm -f conftest.val else ac_cv_decl_EOVERFLOW=E2BIG fi fi fi { $as_echo "$as_me:$LINENO: result: $ac_cv_decl_EOVERFLOW" >&5 $as_echo "$ac_cv_decl_EOVERFLOW" >&6; } if test "$ac_cv_decl_EOVERFLOW" != yes; then cat >>confdefs.h <<_ACEOF #define EOVERFLOW $ac_cv_decl_EOVERFLOW _ACEOF EOVERFLOW="$ac_cv_decl_EOVERFLOW" fi { $as_echo "$as_me:$LINENO: checking whether AF_INET6 is declared" >&5 $as_echo_n "checking whether AF_INET6 is declared... " >&6; } if test "${ac_cv_have_decl_AF_INET6+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include int main () { #ifndef AF_INET6 (void) AF_INET6; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_have_decl_AF_INET6=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_AF_INET6=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_AF_INET6" >&5 $as_echo "$ac_cv_have_decl_AF_INET6" >&6; } if test $ac_cv_have_decl_AF_INET6 = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DECL_AF_INET6 1 _ACEOF else cat >>confdefs.h <<_ACEOF #define HAVE_DECL_AF_INET6 0 _ACEOF fi { $as_echo "$as_me:$LINENO: checking whether INET6_ADDRSTRLEN is declared" >&5 $as_echo_n "checking whether INET6_ADDRSTRLEN is declared... " >&6; } if test "${ac_cv_have_decl_INET6_ADDRSTRLEN+set}" = set; then $as_echo_n "(cached) " >&6 else cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include int main () { #ifndef INET6_ADDRSTRLEN (void) INET6_ADDRSTRLEN; #endif ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then ac_cv_have_decl_INET6_ADDRSTRLEN=yes else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_have_decl_INET6_ADDRSTRLEN=no fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_have_decl_INET6_ADDRSTRLEN" >&5 $as_echo "$ac_cv_have_decl_INET6_ADDRSTRLEN" >&6; } if test $ac_cv_have_decl_INET6_ADDRSTRLEN = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_DECL_INET6_ADDRSTRLEN 1 _ACEOF else cat >>confdefs.h <<_ACEOF #define HAVE_DECL_INET6_ADDRSTRLEN 0 _ACEOF fi { $as_echo "$as_me:$LINENO: checking for struct sockaddr_in6" >&5 $as_echo_n "checking for struct sockaddr_in6... " >&6; } if test "${ac_cv_type_struct_sockaddr_in6+set}" = set; then $as_echo_n "(cached) " >&6 else ac_cv_type_struct_sockaddr_in6=no cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include int main () { if (sizeof (struct sockaddr_in6)) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then cat >conftest.$ac_ext <<_ACEOF /* confdefs.h. */ _ACEOF cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ #include #include #include int main () { if (sizeof ((struct sockaddr_in6))) return 0; ; return 0; } _ACEOF rm -f conftest.$ac_objext if { (ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" $as_echo "$ac_try_echo") >&5 (eval "$ac_compile") 2>conftest.er1 ac_status=$? grep -v '^ *+' conftest.er1 >conftest.err rm -f conftest.er1 cat conftest.err >&5 $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); } && { test -z "$ac_c_werror_flag" || test ! -s conftest.err } && test -s conftest.$ac_objext; then : else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 ac_cv_type_struct_sockaddr_in6=yes fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 fi rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi { $as_echo "$as_me:$LINENO: result: $ac_cv_type_struct_sockaddr_in6" >&5 $as_echo "$ac_cv_type_struct_sockaddr_in6" >&6; } if test $ac_cv_type_struct_sockaddr_in6 = yes; then cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_SOCKADDR_IN6 1 _ACEOF fi ac_config_files="$ac_config_files Makefile amavisd-milter/Makefile compat/Makefile" ac_config_files="$ac_config_files autoconf.sh" if test "$localstatedir" = '${prefix}/var'; then localstatedir='/var/amavis' fi test "x$prefix" = xNONE && prefix_NONE=yes && prefix="$ac_default_prefix" test "x$exec_prefix" = xNONE && exec_prefix_NONE=yes && exec_prefix="${prefix}" eval LOCALSTATEDIR=\""$localstatedir"\" eval LOCALSTATEDIR=\""$LOCALSTATEDIR"\" cat >>confdefs.h <<_ACEOF #define LOCAL_STATE_DIR "$LOCALSTATEDIR" _ACEOF test "$prefix_NONE" && prefix=NONE test "$exec_prefix_NONE" && exec_prefix=NONE # Check whether --with-working-dir was given. if test "${with_working_dir+set}" = set; then withval=$with_working_dir; case "$with_working_dir" in no) cat >>confdefs.h <<_ACEOF #define WORKING_DIR LOCAL_STATE_DIR _ACEOF ;; yes) cat >>confdefs.h <<_ACEOF #define WORKING_DIR LOCAL_STATE_DIR "/tmp" _ACEOF ;; /*) cat >>confdefs.h <<_ACEOF #define WORKING_DIR "$with_working_dir" _ACEOF ;; *) cat >>confdefs.h <<_ACEOF #define WORKING_DIR LOCAL_STATE_DIR "/$with_working_dir" _ACEOF ;; esac else cat >>confdefs.h <<_ACEOF #define WORKING_DIR LOCAL_STATE_DIR _ACEOF fi cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs, see configure's option --config-cache. # It is not useful on other systems. If it contains results you don't # want to keep, you may remove or edit it. # # config.status only pays attention to the cache file if you give it # the --recheck option to rerun configure. # # `ac_cv_env_foo' variables (set or unset) will be overridden when # loading this file, other *unset* `ac_cv_foo' will be assigned the # following values. _ACEOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, we kill variables containing newlines. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. ( for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do eval ac_val=\$$ac_var case $ac_val in #( *${as_nl}*) case $ac_var in #( *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 $as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( *) $as_unset $ac_var ;; esac ;; esac done (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote # substitution turns \\\\ into \\, and sed turns \\ into \). sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" ;; #( *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" ;; esac | sort ) | sed ' /^ac_cv_env_/b end t clear :clear s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ t end s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then test "x$cache_file" != "x/dev/null" && { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} cat confcache >$cache_file else { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi rm -f confcache test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"AMDEP\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&5 $as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. Usually this means the macro was only invoked conditionally." >&2;} { (exit 1); exit 1; }; } fi : ${CONFIG_STATUS=./config.status} ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" { $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=\${CONFIG_SHELL-$SHELL} _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac fi # PATH needs CR # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits as_nl=' ' export as_nl # Printing a long string crashes Solaris 7 /usr/bin/printf. as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' as_echo_n='/usr/ucb/echo -n' else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; case $arg in *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; esac; expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" ' export as_echo_n_body as_echo_n='sh -c $as_echo_n_body as_echo' fi export as_echo_body as_echo='sh -c $as_echo_body as_echo' fi # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then PATH_SEPARATOR=: (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || PATH_SEPARATOR=';' } fi # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # IFS # We need space, tab and new line, in precisely that order. Quoting is # there to prevent editors from complaining about space-tab. # (If _AS_PATH_WALK were called with IFS unset, it would disable word # splitting by setting IFS to empty value.) IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done IFS=$as_save_IFS ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 { (exit 1); exit 1; } fi # Work around bugs in pre-3.0 UWIN ksh. for as_var in ENV MAIL MAILPATH do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var done PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. LC_ALL=C export LC_ALL LANGUAGE=C export LANGUAGE # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)' \| . 2>/dev/null || $as_echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } /^X\/\(\/\/\)$/{ s//\1/ q } /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` # CDPATH. $as_unset CDPATH as_lineno_1=$LINENO as_lineno_2=$LINENO test "x$as_lineno_1" != "x$as_lineno_2" && test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line after each line using $LINENO; the second 'sed' # does the real work. The second script uses 'N' to pair each # line-number line with the line containing $LINENO, and appends # trailing '-' during substitution so that $LINENO is not a special # case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # scripts with optimization help from Paolo Bonzini. Blame Lee # E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= ' <$as_myself | sed ' s/[$]LINENO.*/&-/ t lineno b :lineno N :loop s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ t loop s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). . "./$as_me.lineno" # Exit status is that of the last command. exit } if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then as_dirname=dirname else as_dirname=false fi ECHO_C= ECHO_N= ECHO_T= case `echo -n x` in -n*) case `echo 'x\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. *) ECHO_C='\c';; esac;; *) ECHO_N='-n';; esac if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then rm -f conf$$.dir/conf$$.file else rm -f conf$$.dir mkdir conf$$.dir 2>/dev/null fi if (echo >conf$$.file) 2>/dev/null; then if ln -s conf$$.file conf$$ 2>/dev/null; then as_ln_s='ln -s' # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. # In both cases, we have to default to `cp -p'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || as_ln_s='cp -p' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi if test -x / >/dev/null 2>&1; then as_test_x='test -x' else if ls -dL / >/dev/null 2>&1; then as_ls_L_option=L else as_ls_L_option= fi as_test_x=' eval sh -c '\'' if test -d "$1"; then test -d "$1/."; else case $1 in -*)set "./$1";; esac; case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ???[sx]*):;;*)false;;esac;fi '\'' sh ' fi as_executable_p=$as_test_x # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 # Save the log message, to keep $[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" This file was extended by amavisd-milter $as_me 1.5.0, which was generated by GNU Autoconf 2.62. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ on `(hostname || uname -n) 2>/dev/null | sed 1q` " _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" config_headers="$ac_config_headers" config_commands="$ac_config_commands" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_version="\\ amavisd-milter config.status 1.5.0 configured by $0, generated by GNU Autoconf 2.62, with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" Copyright (C) 2008 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' MKDIR_P='$MKDIR_P' AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # The default lists apply if the user does not specify any file. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; *) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header { $as_echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; };; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { $as_echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2 { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ac_need_defaults=false ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' export CONFIG_SHELL exec "\$@" fi _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX $as_echo "$ac_log" } >&5 _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # Handling of arguments. for ac_config_target in $ac_config_targets do case $ac_config_target in "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "amavisd-milter/Makefile") CONFIG_FILES="$CONFIG_FILES amavisd-milter/Makefile" ;; "compat/Makefile") CONFIG_FILES="$CONFIG_FILES compat/Makefile" ;; "autoconf.sh") CONFIG_FILES="$CONFIG_FILES autoconf.sh" ;; *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 $as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason against having it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Hook for its removal unless debugging. # Note that there is a small window in which the directory will not be cleaned: # after its creation but before its name has been assigned to `$tmp'. $debug || { tmp= trap 'exit_status=$? { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") } || { $as_echo "$as_me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. # This happens for instance with `./config.status config.h'. if test -n "$CONFIG_FILES"; then ac_cr=' ' ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' else ac_cs_awk_cr=$ac_cr fi echo 'BEGIN {' >"$tmp/subs1.awk" && _ACEOF { echo "cat >conf$$subs.awk <<_ACEOF" && echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = $ac_delim_num; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 $as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 cat >>"\$tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h s/^/S["/; s/!.*/"]=/ p g s/^[^!]*!// :repl t repl s/'"$ac_delim"'$// t delim :nl h s/\(.\{148\}\).*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p n b repl :more1 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t nl :delim h s/\(.\{148\}\).*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p b :more2 s/["\\]/\\&/g; s/^/"/; s/$/"\\/ p g s/.\{148\}// t delim ' >$CONFIG_STATUS || ac_write_fail=1 rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK cat >>"\$tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" } { line = $ 0 nfields = split(line, field, "@") substed = 0 len = length(field[1]) for (i = 2; i < nfields; i++) { key = field[i] keylen = length(key) if (S_is_set[key]) { value = S[key] line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) len += length(value) + length(field[++i]) substed = 1 } else len += 1 + keylen } print line } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 $as_echo "$as_me: error: could not setup config files machinery" >&2;} { (exit 1); exit 1; }; } _ACEOF # VPATH may cause trouble with some makes, so we remove $(srcdir), # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/ s/:*\${srcdir}:*/:/ s/:*@srcdir@:*/:/ s/^\([^=]*=[ ]*\):*/\1/ s/:*$// s/^[^=]*=[ ]*$// }' fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" # Set up the scripts for CONFIG_HEADERS section. # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then cat >"$tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF # Transform confdefs.h into an awk script `defines.awk', embedded as # here-document in config.status, that substitutes the proper values into # config.h.in to produce config.h. # Create a delimiter string that does not exist in confdefs.h, to ease # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do ac_t=`sed -n "/$ac_delim/p" confdefs.h` if test -z "$ac_t"; then break elif $ac_last_try; then { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 $as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} { (exit 1); exit 1; }; } else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi done # For the awk script, D is an array of macro values keyed by name, # likewise P contains macro parameters if any. Preserve backslash # newline sequences. ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* sed -n ' s/.\{148\}/&'"$ac_delim"'/g t rset :rset s/^[ ]*#[ ]*define[ ][ ]*/ / t def d :def s/\\$// t bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3"/p s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p d :bsnl s/["\\]/\\&/g s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ D["\1"]=" \3\\\\\\n"\\/p t cont s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p t cont d :cont n s/.\{148\}/&'"$ac_delim"'/g t clear :clear s/\\$// t bsnlc s/["\\]/\\&/g; s/^/"/; s/$/"/p d :bsnlc s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p b cont ' >$CONFIG_STATUS || ac_write_fail=1 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 for (key in D) D_is_set[key] = 1 FS = "" } /^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { line = \$ 0 split(line, arg, " ") if (arg[1] == "#") { defundef = arg[2] mac1 = arg[3] } else { defundef = substr(arg[1], 2) mac1 = arg[2] } split(mac1, mac2, "(") #) macro = mac2[1] if (D_is_set[macro]) { # Preserve the white space surrounding the "#". prefix = substr(line, 1, index(line, defundef) - 1) print prefix "define", macro P[macro] D[macro] next } else { # Replace #undef with comments. This is necessary, for example, # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { print "/*", line, "*/" next } } } { print } _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 $as_echo "$as_me: error: could not setup config headers machinery" >&2;} { (exit 1); exit 1; }; } fi # test -n "$CONFIG_HEADERS" eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" shift for ac_tag do case $ac_tag in :[FHLC]) ac_mode=$ac_tag; continue;; esac case $ac_mode$ac_tag in :[FHL]*:*);; :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 $as_echo "$as_me: error: Invalid tag $ac_tag." >&2;} { (exit 1); exit 1; }; };; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac ac_save_IFS=$IFS IFS=: set x $ac_tag IFS=$ac_save_IFS shift ac_file=$1 shift case $ac_mode in :L) ac_source=$1;; :[FH]) ac_file_inputs= for ac_f do case $ac_f in -) ac_f="$tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. test -f "$ac_f" || case $ac_f in [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 $as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} { (exit 1); exit 1; }; };; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac ac_file_inputs="$ac_file_inputs '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ configure_input='Generated from '` $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. case $configure_input in #( *\&* | *\|* | *\\* ) ac_sed_conf_input=`$as_echo "$configure_input" | sed 's/[\\\\&|]/\\\\&/g'`;; #( *) ac_sed_conf_input=$configure_input;; esac case $ac_tag in *:-:* | *:-) cat >"$tmp/stdin" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; esac ;; esac ac_dir=`$as_dirname -- "$ac_file" || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir="$ac_dir" case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. case "$ac_dir" in .) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` # A ".." for each directory in $ac_dir_suffix. ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` case $ac_top_builddir_sub in "") ac_top_builddir_sub=. ac_top_build_prefix= ;; *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; esac ;; esac ac_abs_top_builddir=$ac_pwd ac_abs_builddir=$ac_pwd$ac_dir_suffix # for backward compatibility: ac_top_builddir=$ac_top_build_prefix case $srcdir in .) # We are building in place. ac_srcdir=. ac_top_srcdir=$ac_top_builddir_sub ac_abs_top_srcdir=$ac_pwd ;; [\\/]* | ?:[\\/]* ) # Absolute name. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ac_abs_top_srcdir=$srcdir ;; *) # Relative name. ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_build_prefix$srcdir ac_abs_top_srcdir=$ac_pwd/$srcdir ;; esac ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix case $ac_mode in :F) # # CONFIG_FILE # case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac ac_MKDIR_P=$MKDIR_P case $MKDIR_P in [\\/$]* | ?:[\\/]* ) ;; */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= ac_sed_dataroot=' /datarootdir/ { p q } /@datadir@/p /@docdir@/p /@infodir@/p /@localedir@/p /@mandir@/p ' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_datarootdir_hack=' s&@datadir@&$datadir&g s&@docdir@&$docdir&g s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF # Neutralize VPATH when `$srcdir' = `.'. # Shell code in configure.ac might set extrasub. # FIXME: do we really want to maintain this feature? cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_sed_extra="$ac_vpsub $extrasub _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s|@configure_input@|$ac_sed_conf_input|;t t s&@top_builddir@&$ac_top_builddir_sub&;t t s&@top_build_prefix@&$ac_top_build_prefix&;t t s&@srcdir@&$ac_srcdir&;t t s&@abs_srcdir@&$ac_abs_srcdir&;t t s&@top_srcdir@&$ac_top_srcdir&;t t s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' which seems to be undefined. Please make sure it is defined." >&2;} rm -f "$tmp/stdin" case $ac_file in -) cat "$tmp/out" && rm -f "$tmp/out";; *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; esac \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } ;; :H) # # CONFIG_HEADER # if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" } >"$tmp/config.h" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" mv "$tmp/config.h" "$ac_file" \ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 $as_echo "$as_me: error: could not create $ac_file" >&2;} { (exit 1); exit 1; }; } fi else $as_echo "/* $configure_input */" \ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 $as_echo "$as_me: error: could not create -" >&2;} { (exit 1); exit 1; }; } fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $_am_arg | $_am_arg:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || $as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$_am_arg" : 'X\(//\)[^/]' \| \ X"$_am_arg" : 'X\(//\)$' \| \ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$_am_arg" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'`/stamp-h$_am_stamp_count ;; :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` { as_dir=$dirpart/$fdir case $as_dir in #( -*) as_dir=./$as_dir;; esac test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { as_dirs= while :; do case $as_dir in #( *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( *) as_qdir=$as_dir;; esac as_dirs="'$as_qdir' $as_dirs" as_dir=`$as_dirname -- "$as_dir" || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || $as_echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q'` test -d "$as_dir" && break done test -z "$as_dirs" || eval "mkdir $as_dirs" } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 $as_echo "$as_me: error: cannot create directory $as_dir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; "autoconf.sh":F) chmod +x autoconf.sh ;; esac done # for ac_tag { (exit 0); exit 0; } _ACEOF chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 $as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} { (exit 1); exit 1; }; } # configure is writing to config.log, and then calls config.status. # config.status does its own redirection, appending to config.log. # Unfortunately, on DOS this fails, as config.log is still kept open # by configure, so config.status won't be able to write to it; its # output is simply discarded. So we exec the FD to /dev/null, # effectively closing config.log, so it can be properly (re)opened and # appended to by config.status. When coming back to configure, we # need to make the FD available again. if test "$no_create" != yes; then ac_cs_success=: ac_config_status_args= test "$silent" = yes && ac_config_status_args="$ac_config_status_args --quiet" exec 5>/dev/null $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. $ac_cs_success || { (exit 1); exit 1; } fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;} fi amavisd-milter-1.5.0/config.h.in000644 001751 001751 00000014233 11367260551 016425 0ustar00rehoreho000000 000000 /* config.h.in. Generated from configure.ac by autoheader. */ /* Define as good substitute value for EILSEQ. */ #undef EILSEQ /* Define as good substitute value for EOVERFLOW. */ #undef EOVERFLOW /* Define to 1 if you have the `arc4random' function. */ #undef HAVE_ARC4RANDOM /* Define to 1 if you have the header file. */ #undef HAVE_ARPA_INET_H /* Define to 1 if you have the header file. */ #undef HAVE_CTYPE_H /* Define to 1 if you have the `daemon' function. */ #undef HAVE_DAEMON /* Define to 1 if you have the declaration of `AF_INET6', and to 0 if you don't. */ #undef HAVE_DECL_AF_INET6 /* Define to 1 if you have the declaration of `INET6_ADDRSTRLEN', and to 0 if you don't. */ #undef HAVE_DECL_INET6_ADDRSTRLEN /* Define to 1 if you have the declaration of `tzname', and to 0 if you don't. */ #undef HAVE_DECL_TZNAME /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_DIRENT_H /* Define to 1 if you have the `dirfd' function. */ #undef HAVE_DIRFD /* Define if dirfd() is a macro. */ #undef HAVE_DIRFD_AS_MACRO /* Define to 1 if `dd_fd' is member of `DIR'. */ #undef HAVE_DIR_DD_FD /* Define to 1 if `d_fd' is member of `DIR'. */ #undef HAVE_DIR_D_FD /* Define to 1 if `__dd_fd' is member of `DIR'. */ #undef HAVE_DIR___DD_FD /* Define to 1 if you have the header file. */ #undef HAVE_ERRNO_H /* Define to 1 if you have the header file. */ #undef HAVE_FCNTL_H /* Define to 1 if you have the header file. */ #undef HAVE_FTS_H /* Define to 1 if you have the `fts_open' function. */ #undef HAVE_FTS_OPEN /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_LIMITS_H /* Define to 1 if you have the header file. */ #undef HAVE_MEMORY_H /* Define to 1 if you have the `mkdtemp' function. */ #undef HAVE_MKDTEMP /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_NETINET_IN_H /* Define if you have POSIX threads libraries and header files. */ #undef HAVE_PTHREAD /* Define to 1 if you have the `sem_timedwait' function. */ #undef HAVE_SEM_TIMEDWAIT /* Define to 1 if you have the `smfi_insheader' function. */ #undef HAVE_SMFI_INSHEADER /* Define to 1 if you have the `smfi_opensocket' function. */ #undef HAVE_SMFI_OPENSOCKET /* Define to 1 if you have the `smfi_progress' function. */ #undef HAVE_SMFI_PROGRESS /* Define to 1 if you have the `smfi_quarantine' function. */ #undef HAVE_SMFI_QUARANTINE /* Define to 1 if you have the `smfi_setbacklog' function. */ #undef HAVE_SMFI_SETBACKLOG /* Define to 1 if you have the header file. */ #undef HAVE_STDARG_H /* Define to 1 if stdbool.h conforms to C99. */ #undef HAVE_STDBOOL_H /* Define to 1 if you have the header file. */ #undef HAVE_STDINT_H /* Define to 1 if you have the header file. */ #undef HAVE_STDIO_H /* Define to 1 if you have the header file. */ #undef HAVE_STDLIB_H /* Define to 1 if you have the header file. */ #undef HAVE_STRINGS_H /* Define to 1 if you have the header file. */ #undef HAVE_STRING_H /* Define to 1 if you have the `strlcpy' function. */ #undef HAVE_STRLCPY /* Define to 1 if `struct direct' has a d_namlen element */ #undef HAVE_STRUCT_DIRENT_D_NAMLEN /* Define to 1 if the system has the type `struct sockaddr_in6'. */ #undef HAVE_STRUCT_SOCKADDR_IN6 /* Define to 1 if `tm_zone' is member of `struct tm'. */ #undef HAVE_STRUCT_TM_TM_ZONE /* Define to 1 if you have the header file. */ #undef HAVE_SYSEXITS_H /* Define to 1 if you have the header file. */ #undef HAVE_SYSLOG_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_DIR_H /* Define to 1 if you have the header file, and it defines `DIR'. */ #undef HAVE_SYS_NDIR_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_SOCKET_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_STAT_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_TYPES_H /* Define to 1 if you have the header file. */ #undef HAVE_SYS_UN_H /* Define to 1 if your `struct tm' has `tm_zone'. Deprecated, use `HAVE_STRUCT_TM_TM_ZONE' instead. */ #undef HAVE_TM_ZONE /* Define to 1 if you don't have `tm_zone' but do have the external array `tzname'. */ #undef HAVE_TZNAME /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H /* Define to 1 if you have the header file. */ #undef HAVE_WCHAR_H /* Define to 1 if the system has the type `_Bool'. */ #undef HAVE__BOOL /* Default location to store state files. */ #undef LOCAL_STATE_DIR /* Define to 1 if your C compiler doesn't accept -c and -o together. */ #undef NO_MINUS_C_MINUS_O /* Name of package */ #undef PACKAGE /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT /* Define to the full name of this package. */ #undef PACKAGE_NAME /* Define to the full name and version of this package. */ #undef PACKAGE_STRING /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME /* Define to the version of this package. */ #undef PACKAGE_VERSION /* Define to necessary symbol if this constant uses a non-standard name on your system. */ #undef PTHREAD_CREATE_JOINABLE /* Define to 1 if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define to 1 if you can safely include both and . */ #undef TIME_WITH_SYS_TIME /* Define to 1 if your declares `struct tm'. */ #undef TM_IN_SYS_TIME /* Version number of package */ #undef VERSION /* Default location of working directory. */ #undef WORKING_DIR /* Define to `int' if does not define. */ #undef mode_t /* Define to `unsigned int' if does not define. */ #undef size_t amavisd-milter-1.5.0/LICENSE000644 001751 001751 00000003154 10240224665 015402 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: LICENSE,v 1.1 2005/05/10 21:37:57 reho Exp $ */ amavisd-milter-1.5.0/README000644 001751 001751 00000017703 11367246337 015275 0ustar00rehoreho000000 000000 This is the README for the amavisd-milter(8). NAME amavisd-milter -- sendmail milter for amavisd-new SYNOPSIS amavisd-milter [-fhv] [-d debug-level] [-D delivery-care-of] [-m max-conns] [-M max-wait] [-p pidfile] [-P] [-q backlog] [-s socket] [-t timeout] [-S socket] [-T timeout] [-w directory] DESCRIPTION The amavisd-milter is a sendmail milter (mail filter) for amavisd-new 2.4.3 and above and sendmail 8.13 and above (limited support for 8.12 is provided). Instead of older amavis-milter helper program, full amavisd-new function- ality is available, including adding spam and virus information header fields, modifying Subject, adding address extensions and removing certain recipients from delivery while delivering the same message to the rest. For more information you can visit amavisd-milter website: http://amavisd-milter.sourceforge.net/ and SourceForge project: http://sourceforge.net/projects/amavisd-milter Options The options are as follows: -d debug-level Set the debug level to debug-level. Debugging traces become more verbose as the debug level increases. Maximum is 9. -D delivery-care-of Set AM.PDP request attribute delivery_care_of to client (default) or server. When client method is used then amavisd-milter is responsible to forward the message to recipients. This method doesn't allow personalized header or body modification. When server method is used then amavisd-new is responsible to forward the message to recipients and can provide personalized header and body modification. $forward_method in amavisd.conf must point to some place willing to accept mail without further checking in amavisd-new. -f Run amavisd-milter in the foreground (i.e. do not daemonize). Print debug messages to the terminal. -h Print help page and exit. -m max-conns Maximum concurrent amavisd connections (default 0 - unlimited number of connections). It must agree with the $max_servers entry in amavisd.conf. -M max-wait Maximum wait for connection to amavisd in seconds (default 300 = 5 minutes). It must be less then sending MTA timeout for a response to the final "." that terminates a message on sending MTA. sendmail has default value 1 hour, postfix 10 minutes and qmail 20 minutes. We suggest to use less than 10 minutes. -p pidfile Use this pid file (default /var/amavis/amavisd-milter.pid). -P When amavisd-new fails mail will be passed through unchecked. -q backlog Sets the incoming socket backlog used by listen(2). If it is not set or set to zero, the operating system default is used. -s socket Communication socket between sendmail and amavisd-milter (default /var/amavis/amavisd-milter.sock). The protocol spoken over this socket is MILTER (Mail FILTER). It must agree with the INPUT_MAIL_FILTER entry in sendmail.mc The socket should be in "proto:address" format: o {unix|local}:/path/to/file - A named pipe. o inet:port@{hostname|ip-address} - An IPV4 socket. o inet6:port@{hostname|ip-address} - An IPV6 socket. -S socket Communication socket between amavisd-milter and amavisd-new (default /var/amavis/amavisd.sock). The protocol spoken over this socket is AM.PDP (AMavis Policy Delegation Protocol). It must agree with the $unix_socketname entry in amavisd.conf. The socket should be in "proto:address" format: o {unix|local}:/path/to/file - A named pipe. -t timeout sendmail connection timeout in seconds (default 600 = 10 min- utes). It must agree with the INPUT_MAIL_FILTER entry in send- mail.mc and must be greater than or equal to the amavisd-new con- nection timeout. When you use other milters (especially time- consuming), the timeout must be sufficient to process message in all milters. -T timeout amavisd-new connection timeout in seconds (default 600 = 10 min- utes). This timeout must be sufficient for message processing in amavisd-new. It's usually a good idea to adjust them to the same value as sendmail connection timeout. -v Report the version number and exit. -w directory Set working directory (default /var/amavis). Limited support for sendmail 8.12 o smfi_addheader() is used instead of smfi_insheader() for insheader and addheader AM.PDP responses. This works well with amavisd-new 2.4.3 or newer. o smfi_progress() isn't called when amavisd-milter wait for amavisd-new communication socket. o AM.PDP response quarantine isn't implemented. FILES /var/amavis/amavisd-milter.pid The default process-id file. /var/amavis/amavisd-milter.sock The default sendmail communication socket. /var/amavis/amavisd.sock Th default amavisd-new communication socket. /var/amavis The default working directory. POLICY BANK When remote client is authenticated, amavisd-milter forward this informa- tion to amavisd-new through AM.PDP request attribute policy_bank: SMTP_AUTH Indicate that the remote client is authenticated. SMTP_AUTH_ Remote client authentication mechanism. SMTP_AUTH__ The number of bits used for the key of the symmetric cipher when authentication mechanism use it. EXAMPLES Configuring amavisd-new In amavisd.conf file change protocol and socket settings to: $protocol = "AM.PDP"; # Use AM.PDP protocol $unix_socketname = "$MYHOME/amavisd.sock"; # Listen on Unix socket ### $inet_socket_port = 10024; # Don't listen on TCP port Then (re)start amavisd daemon. Configuring sendmail To the sendmail.mc file add the following entries: define(`confMILTER_MACROS_ENVFROM', confMILTER_MACROS_ENVFROM`, r, b') INPUT_MAIL_FILTER(`amavisd-milter', `S=local:/var/amavis/amavisd-milter.sock, F=T, T=S:10m;R:10m;E:10m') Then rebuild your sendmail.cf file, install it (usually to /etc/mail/sendmail.cf) and (re)start sendmail daemon. Running amavisd-milter This example assume that amavisd-new is running as user amavis. It must agree with the entry $daemon_user in amavisd.conf. First create working directory: mkdir /var/amavis/tmp chmod 750 /var/amavis/tmp chown amavis /var/amavis/tmp Then start amavisd-milter as non-priviledged user amavis: su - amavis -c "amavisd-milter -w /var/amavis/tmp" Limiting maximum concurrent connections to amavisd To limit concurrent connections to 4 and fail after 10 minutes (10*60 secs) of waiting run amavisd-milter with this options: su - amavis -c "amavisd-milter -w /var/amavis/tmp -m 4 -M 600" Troubleshooting For troubleshooting run amavisd-milter on the foreground and set debug level to appropriate level: su - amavis -c "amavisd-milter -w /var/amavis/tmp -f -d level" where debug levels are: 1 Not errors but unexpected states (connection abort etc). 2 Main states in message processing. 3 All amavisd-milter debug messages. 4-9 Milter communication debugging (smfi_setdbg 1-6). SEE ALSO http://amavisd-milter.sourceforge.net http://www.ijs.si/software/amavisd/ http://www.milter.org/developers http://www.sendmail.org AUTHORS This manual page was written by Petr Rehor and is based on Jerzy Sakol initial work. BUGS A community mailing lists are available at: http://sourceforge.net/mail/?group_id=138169 Enhancements, requests and problem reports are welcome. If you run into problems first check the users mailing list archive before asking questions on the list. It's highly likely somebody has already come across the same problem and it's been solved. amavisd-milter-1.5.0/compat/000777 001751 001751 00000000000 11367260642 015667 5ustar00rehoreho000000 000000 amavisd-milter-1.5.0/AUTHORS000644 001751 001751 00000000214 10240224665 015437 0ustar00rehoreho000000 000000 PRIMARY AUTHORS AND MAJOR CONTRIBUTORS: * Petr Rehor is the original author. $Id: AUTHORS,v 1.1 2005/05/10 21:37:57 reho Exp $ amavisd-milter-1.5.0/aclocal/000777 001751 001751 00000000000 11367260642 016002 5ustar00rehoreho000000 000000 amavisd-milter-1.5.0/Makefile.am000644 001751 001751 00000002702 10365442642 016434 0ustar00rehoreho000000 000000 # $Id: Makefile.am,v 1.4 2006/01/24 15:20:02 reho Exp $ # Subdirectories SUBDIRS= \ compat \ amavisd-milter DIST_SUBDIRS= \ ${SUBDIRS} # Not a GNU package AUTOMAKE_OPTIONS= \ foreign # Distribution files EXTRA_DIST= \ AUTHORS \ CHANGES \ INSTALL \ LICENSE \ README \ TODO \ Makefile.am \ Makefile.in \ aclocal.m4 \ config.h.in \ configure \ configure.ac ../website/amavisd-milter.html: amavisd-milter/amavisd-milter.8 nroff -mdoc amavisd-milter/amavisd-milter.8 | \ sed -e '1s/.*//' -e '$$s/.*//' | \ man2html -topm 0 -botm 0 -title "amavisd-milter(8) manual page"| \ sed -e 's;\(http:[^ ]*\);\1;' \ -e 's;";/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-lzma: distdir tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile config.h installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-hdr distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-hook dist-lzma dist-shar dist-tarZ dist-zip distcheck \ distclean distclean-generic distclean-hdr distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \ uninstall uninstall-am ../website/amavisd-milter.html: amavisd-milter/amavisd-milter.8 nroff -mdoc amavisd-milter/amavisd-milter.8 | \ sed -e '1s/.*//' -e '$$s/.*//' | \ man2html -topm 0 -botm 0 -title "amavisd-milter(8) manual page"| \ sed -e 's;\(http:[^ ]*\);\1;' \ -e 's;"; #if defined(dirfd) func_dirfd_macro #endif],[ac_cv_func_dirfd_macro=yes],[ac_cv_func_dirfd_macro=no] ) ]) ]) if test "$ac_cv_func_dirfd_macro" = yes; then AC_DEFINE([HAVE_DIRFD_AS_MACRO], [1]) fi ]) amavisd-milter-1.5.0/aclocal/acinclude.m4000644 001751 001751 00000010203 11105702025 020145 0ustar00rehoreho000000 000000 dnl $Id: acinclude.m4,v 1.9 2008/11/10 00:45:09 reho Exp $ dnl Enables debug output and debug symbols AC_DEFUN([ACX_ENABLE_DEBUG], [ dnl Configure --enable-debug option AC_ARG_ENABLE(debug,[ --enable-debug enables debug output and debug symbols @<:@default=no@:>@], [ if test $enableval = "no" then enable_debug="no" else enable_debug="yes" fi ], [ enable_debug="no" ]) dnl This prevents stupid AC_PROG_CC to add "-g" to the default CFLAGS CFLAGS=" $CFLAGS" AC_REQUIRE([AC_PROG_CC]) if test "$GCC" = "yes"; then if test "$enable_debug" = "yes" then CFLAGS="-g -O2 $CFLAGS" CFLAGS="-W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align $CFLAGS" CFLAGS="-Wcast-qual -Wchar-subscripts -Winline -Wmissing-prototypes $CFLAGS" CFLAGS="-Wmissing-declarations -Wnested-externs -Wpointer-arith $CFLAGS" CFLAGS="-Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings $CFLAGS" else CFLAGS="-O2 -DNDEBUG $CFLAGS" fi fi AC_LANG_C ]) dnl Set local state directory AC_DEFUN([AC_LOCAL_STATE_DIR], [ if test "$localstatedir" = '${prefix}/var'; then AC_SUBST([localstatedir], ['/var/amavis']) fi test "x$prefix" = xNONE && prefix_NONE=yes && prefix="$ac_default_prefix" test "x$exec_prefix" = xNONE && exec_prefix_NONE=yes && exec_prefix="${prefix}" eval LOCALSTATEDIR=\""$localstatedir"\" dnl In Autoconf 2.60, ${datadir} refers to ${datarootdir}, which in turn dnl refers to ${prefix}. Thus we have to use `eval' twice. eval LOCALSTATEDIR=\""$LOCALSTATEDIR"\" AH_TEMPLATE([LOCAL_STATE_DIR], [Default location to store state files.]) AC_DEFINE_UNQUOTED([LOCAL_STATE_DIR], ["$LOCALSTATEDIR"]) test "$prefix_NONE" && prefix=NONE test "$exec_prefix_NONE" && exec_prefix=NONE ]) dnl Set working dir AC_DEFUN([AC_WORKING_DIR], [ AH_TEMPLATE([WORKING_DIR], [Default location of working directory.]) AC_ARG_WITH([working-dir], [ --with-working-dir@<:@=@:>@ set working directory (default tmp) SUBDIR subdirectry of local state dirertory /DIR absolute path to working directory], [ case "$with_working_dir" in no) AC_DEFINE_UNQUOTED([WORKING_DIR], [LOCAL_STATE_DIR]);; yes) AC_DEFINE_UNQUOTED([WORKING_DIR], [LOCAL_STATE_DIR] "/tmp");; /*) AC_DEFINE_UNQUOTED([WORKING_DIR], ["$with_working_dir"]);; *) AC_DEFINE_UNQUOTED([WORKING_DIR], [LOCAL_STATE_DIR "/$with_working_dir"]);; esac ], [AC_DEFINE_UNQUOTED([WORKING_DIR], [LOCAL_STATE_DIR]) ]) ]) dnl Checks for working POSIX semaphores AC_DEFUN([AC_CHECK_POSIX_SEMAPHORES], [ AC_MSG_CHECKING(if POSIX semaphores are working) AC_TRY_RUN([ #include int main() { sem_t sem; int rc; rc = sem_init(&sem, 0, 0); return rc; }], AC_MSG_RESULT(yes), AC_MSG_ERROR(no), AC_MSG_ERROR(no) ) ]) dnl Checks for d_namlen in struct dirent AC_DEFUN([AC_STRUCT_DIRENT_D_NAMLEN], [ AC_MSG_CHECKING(for d_namlen in struct dirent) AC_TRY_COMPILE([ #if HAVE_DIRENT_H # include #else # define dirent direct # if HAVE_SYS_NDIR_H # include # endif # if HAVE_SYS_DIR_H # include # endif # if HAVE_NDIR_H # include # endif #endif ], [ struct dirent dp; int X = dp.d_namlen; ], AC_DEFINE([HAVE_STRUCT_DIRENT_D_NAMLEN], 1, [Define to 1 if `struct direct' has a d_namlen element]) AC_MSG_RESULT(yes), AC_MSG_RESULT(no) ) ]) dnl Checks for AF_INET6 AC_DEFUN([AC_CHECK_AF_INET6], [ AC_CHECK_DECLS([AF_INET6],[],[],[ #include #include ]) ]) dnl Checks for INET6_ADDRSTRLEN AC_DEFUN([AC_CHECK_INET6_ADDRSTRLEN], [ AC_CHECK_DECLS([INET6_ADDRSTRLEN],[],[],[ #include #include #include ]) ]) dnl Checks for struct sockaddr_in6 AC_DEFUN([AC_CHECK_STRUCT_SOCKADDR_IN6], [ AC_CHECK_TYPES([struct sockaddr_in6],[],[],[ #include #include #include ]) ]) amavisd-milter-1.5.0/aclocal/acx_pthread.m4000644 001751 001751 00000032035 11101722607 020513 0ustar00rehoreho000000 000000 dnl http://avahi.org/log/trunk/common/acx_pthread.m4 dnl cahngeset 1277 dnl dnl @synopsis ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]]) dnl dnl @summary figure out how to build C programs using POSIX threads dnl dnl This macro figures out how to build C programs using POSIX threads. dnl It sets the PTHREAD_LIBS output variable to the threads library and dnl linker flags, and the PTHREAD_CFLAGS output variable to any special dnl C compiler flags that are needed. (The user can also force certain dnl compiler flags/libs to be tested by setting these environment dnl variables.) dnl dnl Also sets PTHREAD_CC to any special C compiler that is needed for dnl multi-threaded programs (defaults to the value of CC otherwise). dnl (This is necessary on AIX to use the special cc_r compiler alias.) dnl dnl NOTE: You are assumed to not only compile your program with these dnl flags, but also link it with them as well. e.g. you should link dnl with $PTHREAD_CC $CFLAGS $PTHREAD_CFLAGS $LDFLAGS ... $PTHREAD_LIBS dnl $LIBS dnl dnl If you are only building threads programs, you may wish to use dnl these variables in your default LIBS, CFLAGS, and CC: dnl dnl LIBS="$PTHREAD_LIBS $LIBS" dnl CFLAGS="$CFLAGS $PTHREAD_CFLAGS" dnl CC="$PTHREAD_CC" dnl dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute dnl constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE to dnl that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX). dnl dnl ACTION-IF-FOUND is a list of shell commands to run if a threads dnl library is found, and ACTION-IF-NOT-FOUND is a list of commands to dnl run it if it is not found. If ACTION-IF-FOUND is not specified, the dnl default action will define HAVE_PTHREAD. dnl dnl Please let the authors know if this macro fails on any platform, or dnl if you have any other suggestions or comments. This macro was based dnl on work by SGJ on autoconf scripts for FFTW (www.fftw.org) (with dnl help from M. Frigo), as well as ac_pthread and hb_pthread macros dnl posted by Alejandro Forero Cuervo to the autoconf macro repository. dnl We are also grateful for the helpful feedback of numerous users. dnl dnl @version $Id: acx_pthread.m4,v 1.3 2006/12/17 23:10:14 reho Exp $ dnl @category InstalledPackages dnl @author Steven G. Johnson dnl @version 2006-05-29 dnl @license GPLWithACException dnl dnl Checks for GCC shared/pthread inconsistency based on work by dnl Marcin Owsiany AC_DEFUN([ACX_PTHREAD], [ AC_REQUIRE([AC_CANONICAL_HOST]) AC_LANG_SAVE AC_LANG_C acx_pthread_ok=no # We used to check for pthread.h first, but this fails if pthread.h # requires special compiler flags (e.g. on True64 or Sequent). # It gets checked for in the link test anyway. # First of all, check if the user has set any of the PTHREAD_LIBS, # etcetera environment variables, and if threads linking works using # them: if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS]) AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes) AC_MSG_RESULT($acx_pthread_ok) if test x"$acx_pthread_ok" = xno; then PTHREAD_LIBS="" PTHREAD_CFLAGS="" fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" fi # We must check for the threads library under a number of different # names; the ordering is very important because some systems # (e.g. DEC) have both -lpthread and -lpthreads, where one of the # libraries is broken (non-POSIX). # Create a list of thread flags to try. Items starting with a "-" are # C compiler flags, and other items are library names, except for "none" # which indicates that we try without any flags at all, and "pthread-config" # which is a program returning the flags for the Pth emulation library. acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" # The ordering *is* (sometimes) important. Some notes on the # individual items follow: # pthreads: AIX (must check this before -lpthread) # none: in case threads are in libc; should be tried before -Kthread and # other compiler flags to prevent continual compiler warnings # -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) # -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads) # -pthreads: Solaris/gcc # -mthreads: Mingw32/gcc, Lynx/gcc # -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it # doesn't hurt to check since this sometimes defines pthreads too; # also defines -D_REENTRANT) # ... -mt is also the pthreads flag for HP/aCC # pthread: Linux, etcetera # --thread-safe: KAI C++ # pthread-config: use pthread-config program (for GNU Pth library) case "${host_cpu}-${host_os}" in *solaris*) # On Solaris (at least, for some versions), libc contains stubbed # (non-functional) versions of the pthreads routines, so link-based # tests will erroneously succeed. (We need to link with -pthreads/-mt/ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather # a function called by this macro, so we could check for that, but # who knows whether they'll stub that too in a future libc.) So, # we'll just look for -pthreads and -lpthread first: acx_pthread_flags="-pthreads pthread -mt -pthread $acx_pthread_flags" ;; esac if test x"$acx_pthread_ok" = xno; then for flag in $acx_pthread_flags; do case $flag in none) AC_MSG_CHECKING([whether pthreads work without any flags]) ;; -*) AC_MSG_CHECKING([whether pthreads work with $flag]) PTHREAD_CFLAGS="$flag" ;; pthread-config) AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no) if test x"$acx_pthread_config" = xno; then continue; fi PTHREAD_CFLAGS="`pthread-config --cflags`" PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" ;; *) AC_MSG_CHECKING([for the pthreads library -l$flag]) PTHREAD_LIBS="-l$flag" ;; esac save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="$PTHREAD_LIBS $LIBS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # Check for various functions. We must include pthread.h, # since some functions may be macros. (On the Sequent, we # need a special flag -Kthread to make this header compile.) # We check for pthread_join because it is in -lpthread on IRIX # while pthread_create is in libc. We check for pthread_attr_init # due to DEC craziness with -lpthreads. We check for # pthread_cleanup_push because it is one of the few pthread # functions on Solaris that doesn't have a non-functional libc stub. # We try pthread_create on general principles. AC_TRY_LINK([#include ], [pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ], [acx_pthread_ok=yes]) LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" AC_MSG_RESULT($acx_pthread_ok) if test "x$acx_pthread_ok" = xyes; then break; fi PTHREAD_LIBS="" PTHREAD_CFLAGS="" done fi # Various other checks: if test "x$acx_pthread_ok" = xyes; then save_LIBS="$LIBS" LIBS="$PTHREAD_LIBS $LIBS" save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $PTHREAD_CFLAGS" # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. AC_MSG_CHECKING([for joinable pthread attribute]) attr_name=unknown for attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do AC_TRY_LINK([#include ], [int attr=$attr; return attr;], [attr_name=$attr; break]) done AC_MSG_RESULT($attr_name) if test "$attr_name" != PTHREAD_CREATE_JOINABLE; then AC_DEFINE_UNQUOTED(PTHREAD_CREATE_JOINABLE, $attr_name, [Define to necessary symbol if this constant uses a non-standard name on your system.]) fi AC_MSG_CHECKING([if more special flags are required for pthreads]) flag=no case "${host_cpu}-${host_os}" in *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";; *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";; esac AC_MSG_RESULT(${flag}) if test "x$flag" != xno; then PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS" fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" # More AIX lossage: must compile with xlc_r or cc_r if test x"$GCC" != xyes; then AC_CHECK_PROGS(PTHREAD_CC, xlc_r cc_r, ${CC}) else PTHREAD_CC=$CC fi # The next part tries to detect GCC inconsistency with -shared on some # architectures and systems. The problem is that in certain # configurations, when -shared is specified, GCC "forgets" to # internally use various flags which are still necessary. AC_MSG_CHECKING([whether to check for GCC pthread/shared inconsistencies]) check_inconsistencies=yes case "${host_cpu}-${host_os}" in *-darwin*) check_inconsistencies=no ;; esac if test x"$GCC" != xyes -o "x$check_inconsistencies" != xyes ; then AC_MSG_RESULT([no]) else AC_MSG_RESULT([yes]) # In order not to create several levels of indentation, we test # the value of "$ok" until we find out the cure or run out of # ideas. ok="no" # # Prepare the flags # save_CFLAGS="$CFLAGS" save_LIBS="$LIBS" save_CC="$CC" # Try with the flags determined by the earlier checks. # # -Wl,-z,defs forces link-time symbol resolution, so that the # linking checks with -shared actually have any value # # FIXME: -fPIC is required for -shared on many architectures, # so we specify it here, but the right way would probably be to # properly detect whether it is actually required. CFLAGS="-shared -fPIC -Wl,-z,defs $CFLAGS $PTHREAD_CFLAGS" LIBS="$PTHREAD_LIBS $LIBS" CC="$PTHREAD_CC" AC_MSG_CHECKING([whether -pthread is sufficient with -shared]) AC_TRY_LINK([#include ], [pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ], [ok=yes]) if test "x$ok" = xyes; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi # # Linux gcc on some architectures such as mips/mipsel forgets # about -lpthread # if test x"$ok" = xno; then AC_MSG_CHECKING([whether -lpthread fixes that]) LIBS="-lpthread $PTHREAD_LIBS $save_LIBS" AC_TRY_LINK([#include ], [pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ], [ok=yes]) if test "x$ok" = xyes; then AC_MSG_RESULT([yes]) PTHREAD_LIBS="-lpthread $PTHREAD_LIBS" else AC_MSG_RESULT([no]) fi fi # # FreeBSD 4.10 gcc forgets to use -lc_r instead of -lc # if test x"$ok" = xno; then AC_MSG_CHECKING([whether -lc_r fixes that]) LIBS="-lc_r $PTHREAD_LIBS $save_LIBS" AC_TRY_LINK([#include ], [pthread_t th; pthread_join(th, 0); pthread_attr_init(0); pthread_cleanup_push(0, 0); pthread_create(0,0,0,0); pthread_cleanup_pop(0); ], [ok=yes]) if test "x$ok" = xyes; then AC_MSG_RESULT([yes]) PTHREAD_LIBS="-lc_r $PTHREAD_LIBS" else AC_MSG_RESULT([no]) fi fi if test x"$ok" = xno; then # OK, we have run out of ideas AC_MSG_WARN([Impossible to determine how to use pthreads with shared libraries]) # so it's not safe to assume that we may use pthreads acx_pthread_ok=no fi CFLAGS="$save_CFLAGS" LIBS="$save_LIBS" CC="$save_CC" fi else PTHREAD_CC="$CC" fi AC_SUBST(PTHREAD_LIBS) AC_SUBST(PTHREAD_CFLAGS) AC_SUBST(PTHREAD_CC) # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: if test x"$acx_pthread_ok" = xyes; then ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1]) : else acx_pthread_ok=no $2 fi AC_LANG_RESTORE ])dnl ACX_PTHREAD amavisd-milter-1.5.0/aclocal/install-sh000555 001751 001751 00000032464 11367260554 020013 0ustar00rehoreho000000 000000 #!/bin/sh # install - install a program, script, or datafile scriptversion=2006-12-25.00 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the # following copyright and license. # # Copyright (C) 1994 X Consortium # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to # deal in the Software without restriction, including without limitation the # rights to use, copy, modify, merge, publish, distribute, sublicense, and/or # sell copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN # AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- # TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # # Except as contained in this notice, the name of the X Consortium shall not # be used in advertising or otherwise to promote the sale, use or other deal- # ings in this Software without prior written authorization from the X Consor- # tium. # # # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. nl=' ' IFS=" "" $nl" # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} if test -z "$doit"; then doit_exec=exec else doit_exec=$doit fi # Put in absolute file names if you don't have them in your path; # or use environment vars. chgrpprog=${CHGRPPROG-chgrp} chmodprog=${CHMODPROG-chmod} chownprog=${CHOWNPROG-chown} cmpprog=${CMPPROG-cmp} cpprog=${CPPROG-cp} mkdirprog=${MKDIRPROG-mkdir} mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} posix_glob='?' initialize_posix_glob=' test "$posix_glob" != "?" || { if (set -f) 2>/dev/null; then posix_glob= else posix_glob=: fi } ' posix_mkdir= # Desired mode of installed file. mode=0755 chgrpcmd= chmodcmd=$chmodprog chowncmd= mvcmd=$mvprog rmcmd="$rmprog -f" stripcmd= src= dst= dir_arg= dst_arg= copy_on_change=false no_target_directory= usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE or: $0 [OPTION]... SRCFILES... DIRECTORY or: $0 [OPTION]... -t DIRECTORY SRCFILES... or: $0 [OPTION]... -d DIRECTORIES... In the 1st form, copy SRCFILE to DSTFILE. In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. In the 4th, create DIRECTORIES. Options: --help display this help and exit. --version display version info and exit. -c (ignored) -C install only if different (preserve the last data modification time) -d create directories instead of installing files. -g GROUP $chgrpprog installed files to GROUP. -m MODE $chmodprog installed files to MODE. -o USER $chownprog installed files to USER. -s $stripprog installed files. -t DIRECTORY install into DIRECTORY. -T report an error if DSTFILE is a directory. Environment variables override the default commands: CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG " while test $# -ne 0; do case $1 in -c) ;; -C) copy_on_change=true;; -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 case $mode in *' '* | *' '* | *' '* | *'*'* | *'?'* | *'['*) echo "$0: invalid mode: $mode" >&2 exit 1;; esac shift;; -o) chowncmd="$chownprog $2" shift;; -s) stripcmd=$stripprog;; -t) dst_arg=$2 shift;; -T) no_target_directory=true;; --version) echo "$0 $scriptversion"; exit $?;; --) shift break;; -*) echo "$0: invalid option: $1" >&2 exit 1;; *) break;; esac shift done if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. # Otherwise, the last argument is the destination. Remove it from $@. for arg do if test -n "$dst_arg"; then # $@ is not empty: it contains at least $arg. set fnord "$@" "$dst_arg" shift # fnord fi shift # arg dst_arg=$arg done fi if test $# -eq 0; then if test -z "$dir_arg"; then echo "$0: no input file specified." >&2 exit 1 fi # It's OK to call `install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then trap '(exit $?); exit' 1 2 13 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. case $mode in # Optimize common cases. *644) cp_umask=133;; *755) cp_umask=22;; *[0-7]) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then u_plus_rw= else u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac fi for src do # Protect names starting with `-'. case $src in -*) src=./$src;; esac if test -n "$dir_arg"; then dst=$src dstdir=$dst test -d "$dstdir" dstdir_status=$? else # Waiting for this to be detected by the "$cpprog $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if test ! -f "$src" && test ! -d "$src"; then echo "$0: $src does not exist." >&2 exit 1 fi if test -z "$dst_arg"; then echo "$0: no destination specified." >&2 exit 1 fi dst=$dst_arg # Protect names starting with `-'. case $dst in -*) dst=./$dst;; esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then if test -n "$no_target_directory"; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else # Prefer dirname, but fall back on a substitute if dirname fails. dstdir=` (dirname "$dst") 2>/dev/null || expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$dst" : 'X\(//\)[^/]' \| \ X"$dst" : 'X\(//\)$' \| \ X"$dst" : 'X\(/\)' \| . 2>/dev/null || echo X"$dst" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q } /^X\(\/\/\)[^/].*/{ s//\1/ q } /^X\(\/\/\)$/{ s//\1/ q } /^X\(\/\).*/{ s//\1/ q } s/.*/./; q' ` test -d "$dstdir" dstdir_status=$? fi fi obsolete_mkdir_used=false if test $dstdir_status != 0; then case $posix_mkdir in '') # Create intermediate dirs using mode 755 as modified by the umask. # This is like FreeBSD 'install' as of 1997-10-28. umask=`umask` case $stripcmd.$umask in # Optimize common cases. *[2367][2367]) mkdir_umask=$umask;; .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; *[0-7]) mkdir_umask=`expr $umask + 22 \ - $umask % 100 % 40 + $umask % 20 \ - $umask % 10 % 4 + $umask % 2 `;; *) mkdir_umask=$umask,go-w;; esac # With -d, create the new directory with the user-specified mode. # Otherwise, rely on $mkdir_umask. if test -n "$dir_arg"; then mkdir_mode=-m$mode else mkdir_mode= fi posix_mkdir=false case $umask in *[123567][0-7][0-7]) # POSIX mkdir -p sets u+wx bits regardless of umask, which # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 if (umask $mkdir_umask && exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writeable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. ls_ld_tmpdir=`ls -ld "$tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && $mkdirprog -m$different_mode -p -- "$tmpdir" && { ls_ld_tmpdir_1=`ls -ld "$tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi rmdir "$tmpdir/d" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null fi trap '' 0;; esac;; esac if $posix_mkdir && ( umask $mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else # The umask is ridiculous, or mkdir does not conform to POSIX, # or it failed possibly due to a race condition. Create the # directory the slow way, step by step, checking for races as we go. case $dstdir in /*) prefix='/';; -*) prefix='./';; *) prefix='';; esac eval "$initialize_posix_glob" oIFS=$IFS IFS=/ $posix_glob set -f set fnord $dstdir shift $posix_glob set +f IFS=$oIFS prefixes= for d do test -z "$d" && continue prefix=$prefix$d if test -d "$prefix"; then prefixes= else if $posix_mkdir; then (umask=$mkdir_umask && $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break # Don't fail if two instances are running concurrently. test -d "$prefix" || exit 1 else case $prefix in *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; *) qprefix=$prefix;; esac prefixes="$prefixes '$qprefix'" fi fi prefix=$prefix/ done if test -n "$prefixes"; then # Don't fail if two instances are running concurrently. (umask $mkdir_umask && eval "\$doit_exec \$mkdirprog $prefixes") || test -d "$dstdir" || exit 1 obsolete_mkdir_used=true fi fi fi if test -n "$dir_arg"; then { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 else # Make a couple of temp file names in the proper directory. dsttmp=$dstdir/_inst.$$_ rmtmp=$dstdir/_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 # Copy the file name to the temp name. (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && # and set any options; do chmod last to preserve setuid bits. # # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $cpprog $src $dsttmp" command. # { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && eval "$initialize_posix_glob" && $posix_glob set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && $posix_glob set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then rm -f "$dsttmp" else # Rename the file to the real destination. $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || # The rename failed, perhaps because mv can't rename something else # to itself, or perhaps because mv is so ancient that it does not # support -f. { # Now remove or move aside any old file at destination location. # We try this two ways since rm can't unlink itself on some # systems and the destination file might be busy for other # reasons. In this case, the final cleanup might fail but the new # file should still install successfully. { test ! -f "$dst" || $doit $rmcmd -f "$dst" 2>/dev/null || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } } || { echo "$0: cannot unlink or rename $dst" >&2 (exit 1); exit 1 } } && # Now rename the file to the real destination. $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 trap '' 0 fi done # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: amavisd-milter-1.5.0/aclocal/eoverflow.m4000644 001751 001751 00000004347 11033001413 020233 0ustar00rehoreho000000 000000 # $Id: eoverflow.m4,v 1.2 2008/07/02 22:36:59 reho Exp $ # # http://savannah.gnu.org/cgi-bin/viewcvs/gnulib/gnulib/m4/eoverflow.m4 # eoverflow.m4 serial 2 dnl Copyright (C) 2004, 2006 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl From Bruno Haible. # The EOVERFLOW errno value ought to be defined in , according to # POSIX. But some systems (like AIX 3) don't define it, and some systems # (like OSF/1) define it when _XOPEN_SOURCE_EXTENDED is defined. # Define EOVERFLOW as a C macro and as a substituted macro in such a way that # 1. on all systems, after inclusion of , EOVERFLOW is usable, # 2. on systems where EOVERFLOW is defined elsewhere, we use the same numeric # value. AC_DEFUN([gl_EOVERFLOW], [ AC_REQUIRE([AC_PROG_CC])dnl AC_CACHE_CHECK([for EOVERFLOW], ac_cv_decl_EOVERFLOW, [ AC_EGREP_CPP(yes,[ #include #ifdef EOVERFLOW yes #endif ], have_eoverflow=1) if test -n "$have_eoverflow"; then dnl EOVERFLOW exists in . Don't need to define EOVERFLOW ourselves. ac_cv_decl_EOVERFLOW=yes else AC_EGREP_CPP(yes,[ #define _XOPEN_SOURCE_EXTENDED 1 #include #ifdef EOVERFLOW yes #endif ], have_eoverflow=1) if test -n "$have_eoverflow"; then dnl EOVERFLOW exists but is hidden. dnl Define it to the same value. AC_COMPUTE_INT([EOVERFLOW], ac_cv_decl_EOVERFLOW, [ #define _XOPEN_SOURCE_EXTENDED 1 #include /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include ]) else dnl EOVERFLOW isn't defined by the system. Define EOVERFLOW ourselves, but dnl don't define it as EINVAL, because snprintf() callers want to dnl distinguish EINVAL and EOVERFLOW. ac_cv_decl_EOVERFLOW=E2BIG fi fi ]) if test "$ac_cv_decl_EOVERFLOW" != yes; then AC_DEFINE_UNQUOTED([EOVERFLOW], [$ac_cv_decl_EOVERFLOW], [Define as good substitute value for EOVERFLOW.]) EOVERFLOW="$ac_cv_decl_EOVERFLOW" AC_SUBST(EOVERFLOW) fi ]) amavisd-milter-1.5.0/aclocal/config.sub000555 001751 001751 00000073153 11367260554 017772 0ustar00rehoreho000000 000000 #! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003 Free Software Foundation, Inc. timestamp='2003-07-04' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit 0;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | c4x | clipper \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | ip2k \ | m32r | m68000 | m68k | m88k | mcore \ | mips | mipsbe | mipseb | mipsel | mipsle \ | mips16 \ | mips64 | mips64el \ | mips64vr | mips64vrel \ | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el \ | mips64vr4300 | mips64vr4300el \ | mips64vr5000 | mips64vr5000el \ | mipsisa32 | mipsisa32el \ | mipsisa32r2 | mipsisa32r2el \ | mipsisa64 | mipsisa64el \ | mipsisa64sb1 | mipsisa64sb1el \ | mipsisa64sr71k | mipsisa64sr71kel \ | mipstx39 | mipstx39el \ | mn10200 | mn10300 \ | msp430 \ | ns16k | ns32k \ | openrisc | or32 \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ | strongarm \ | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xscale | xstormy16 | xtensa \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | amd64-* | arc-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ | clipper-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | ip2k-* \ | m32r-* \ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | mcore-* \ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ | mips16-* \ | mips64-* | mips64el-* \ | mips64vr-* | mips64vrel-* \ | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* \ | mips64vr5000-* | mips64vr5000el-* \ | mipsisa32-* | mipsisa32el-* \ | mipsisa32r2-* | mipsisa32r2el-* \ | mipsisa64-* | mipsisa64el-* \ | mipsisa64sb1-* | mipsisa64sb1el-* \ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ | mipstx39-* | mipstx39el-* \ | msp430-* \ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ | tahoe-* | thumb-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tron-* \ | v850-* | v850e-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ | xtensa-* \ | ymp-* \ | z8k-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amd64) basic_machine=x86_64-pc ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; c90) basic_machine=c90-cray os=-unicos ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | j90) basic_machine=j90-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; decsystem10* | dec10*) basic_machine=pdp10-dec os=-tops10 ;; decsystem20* | dec20*) basic_machine=pdp10-dec os=-tops20 ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; mmix*) basic_machine=mmix-knuth os=-mmixware ;; monitor) basic_machine=m68k-rom68k os=-coff ;; morphos) basic_machine=powerpc-unknown os=-morphos ;; msdos) basic_machine=i386-pc os=-msdos ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nv1) basic_machine=nv1-cray os=-unicosmp ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; or32 | or32-*) basic_machine=or32-unknown os=-coff ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon | athlon_*) basic_machine=i686-pc ;; pentiumii | pentium2 | pentiumiii | pentium3) basic_machine=i686-pc ;; pentium4) basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentium4-*) basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; s390 | s390-*) basic_machine=s390-ibm ;; s390x | s390x-*) basic_machine=s390x-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sb1) basic_machine=mipsisa64sb1-unknown ;; sb1el) basic_machine=mipsisa64sb1el-unknown ;; sei) basic_machine=mips-sei os=-seiux ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sh64) basic_machine=sh64-unknown ;; sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=alphaev5-cray os=-unicos ;; t90) basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tic55x | c55x*) basic_machine=tic55x-unknown os=-coff ;; tic6x | c6x*) basic_machine=tic6x-unknown os=-coff ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; toad1) basic_machine=pdp10-xkl os=-tops20 ;; tower | tower-32) basic_machine=m68k-ncr ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; xps | xps100) basic_machine=xps100-honeywell ;; ymp) basic_machine=ymp-cray os=-unicos ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; romp) basic_machine=romp-ibm ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; sh64) basic_machine=sh64-unknown ;; sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto-qnx*) ;; -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -atheos*) os=-atheos ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -nova*) os=-rtmk-nova ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -aros*) os=-aros ;; -kaos*) os=-kaos ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; c4x-* | tic4x-*) os=-coff ;; # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; or32-*) os=-coff ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -ptx*) vendor=sequent ;; -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: amavisd-milter-1.5.0/aclocal/depcomp000555 001751 001751 00000042713 11367260554 017362 0ustar00rehoreho000000 000000 #! /bin/sh # depcomp - compile a program generating dependencies as side-effects scriptversion=2007-03-29.01 # Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software # Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Alexandre Oliva . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: depcomp [--help] [--version] PROGRAM [ARGS] Run PROGRAMS ARGS to compile a file, generating dependencies as side-effects. Environment variables: depmode Dependency tracking mode. source Source file read by `PROGRAMS ARGS'. object Object file output by `PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. tmpdepfile Temporary file to use when outputing dependencies. libtool Whether libtool is used (yes/no). Report bugs to . EOF exit $? ;; -v | --v*) echo "depcomp $scriptversion" exit $? ;; esac if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 fi # Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. depfile=${depfile-`echo "$object" | sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case # here, because this file can only contain one case statement. if test "$depmode" = hp; then # HP compiler uses -M and no extra arg. gccflag=-M depmode=gcc fi if test "$depmode" = dashXmstdout; then # This is just like dashmstdout with a different argument. dashmflag=-xM depmode=dashmstdout fi case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. ## Unfortunately, FreeBSD c89 acceptance of flags depends upon ## the command line argument order; so add the flags where they ## appear in depend2.am. Note that the slowdown incurred here ## affects only configure: in makefiles, %FASTDEP% shortcuts this. for arg do case $arg in -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; *) set fnord "$@" "$arg" ;; esac shift # fnord shift # $arg done "$@" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi mv "$tmpdepfile" "$depfile" ;; gcc) ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ## -MM, not -M (despite what the docs say). ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then gccflag=-MD, fi "$@" -Wp,"$gccflag$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" echo "$object : \\" > "$depfile" alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ## This next piece of magic avoids the `deleted header file' problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. tr ' ' ' ' < "$tmpdepfile" | ## Some versions of gcc put a space before the `:'. On the theory ## that the space means something, we add a space to the output as ## well. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp) # This case exists only to let depend.m4 do its work. It works by # looking at the text of this script. This case will never be run, # since it is checked for above. exit 1 ;; sgi) if test "$libtool" = yes; then "$@" "-Wp,-MDupdate,$tmpdepfile" else "$@" -MDupdate "$tmpdepfile" fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files echo "$object : \\" > "$depfile" # Clip off the initial element (the dependent). Don't try to be # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; # the IRIX cc adds comments like `#:fec' to the end of the # dependency line. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ tr ' ' ' ' >> $depfile echo >> $depfile # The second pass generates a dummy entry for each header file. tr ' ' ' ' < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ >> $depfile else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the # current directory. Also, the AIX compiler puts `$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.u tmpdepfile2=$base.u tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else tmpdepfile1=$dir$base.u tmpdepfile2=$dir$base.u tmpdepfile3=$dir$base.u "$@" -M fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then # Each line is of the form `foo.o: dependent.h'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile # "include basename.Plo" scheme. echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; icc) # Intel's C compiler understands `-MD -MF file'. However on # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h # which is wrong. We want: # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h # and will wrap long lines using \ : # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile" exit $stat fi rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to # `$object: dependent.h' and one to simply `dependent.h:'. sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" # Some versions of the HPUX 10.20 sed can't process this invocation # correctly. Breaking it into two sed invocations is a workaround. sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; hp2) # The "hp" stanza above does not work with aCC (C++) and HP's ia64 # compilers, which have integrated preprocessors. The correct option # to use with these is +Maked; it writes dependencies to a file named # 'foo.d', which lands next to the object file, wherever that # happens to be. # Much of this is similar to the tru64 case; see comments there. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then tmpdepfile1=$dir$base.d tmpdepfile2=$dir.libs/$base.d "$@" -Wc,+Maked else tmpdepfile1=$dir$base.d tmpdepfile2=$dir$base.d "$@" +Maked fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" # Add `dependent.h:' lines. sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" "$tmpdepfile2" ;; tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put # dependencies in `foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is # automatically cleaned when .libs/ is deleted, while ignoring # the former would cause a distcleancheck panic. tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 tmpdepfile2=$dir$base.o.d # libtool 1.5 tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 "$@" -Wc,-MD else tmpdepfile1=$dir$base.o.d tmpdepfile2=$dir$base.d tmpdepfile3=$dir$base.d tmpdepfile4=$dir$base.d "$@" -MD fi stat=$? if test $stat -eq 0; then : else rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" exit $stat fi for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" do test -f "$tmpdepfile" && break done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" # That's a tab and a space in the []. sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. dashmstdout) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done test -z "$dashmflag" && dashmflag=-M # Require at least two characters before searching for `:' # in the target name. This is to cope with DOS-style filenames: # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. "$@" $dashmflag | sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' ' < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; dashXmstdout) # This case only exists to satisfy depend.m4. It is never actually # run, as this mode is specially recognized in the preamble. exit 1 ;; makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # X makedepend shift cleared=no for arg in "$@"; do case $cleared in no) set ""; shift cleared=yes ;; esac case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done obj_suffix="`echo $object | sed 's/^.*\././'`" touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" sed '1,2d' "$tmpdepfile" | tr ' ' ' ' | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" "$tmpdepfile".bak ;; cpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout. "$@" || exit $? # Remove the call to Libtool. if test "$libtool" = yes; then while test $1 != '--mode=compile'; do shift done shift fi # Remove `-o $object'. IFS=" " for arg do case $arg in -o) shift ;; $object) shift ;; *) set fnord "$@" "$arg" shift # fnord shift # $arg ;; esac done "$@" -E | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed '$ s: \\$::' > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" cat < "$tmpdepfile" >> "$depfile" sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; msvisualcpp) # Important note: in order to support this mode, a compiler *must* # always write the preprocessed file to stdout, regardless of -o, # because we must use -o when running libtool. "$@" || exit $? IFS=" " for arg do case "$arg" in "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift shift ;; *) set fnord "$@" "$arg" shift shift ;; esac done "$@" -E | sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" echo " " >> "$depfile" . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; none) exec "$@" ;; *) echo "Unknown depmode $depmode" 1>&2 exit 1 ;; esac exit 0 # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: amavisd-milter-1.5.0/aclocal/config.guess000555 001751 001751 00000122065 11367260554 020324 0ustar00rehoreho000000 000000 #! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003 Free Software Foundation, Inc. timestamp='2003-07-02' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Originally written by Per Bothner . # Please send patches to . Submit a context # diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi trap 'exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a # compiler to aid in system detection is discouraged as it requires # temporary files to be created and, as you can see below, it is a # headache to deal with in a portable fashion. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. # Portable tmp directory creation inspired by the Autoconf team. set_cc_for_build=' trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; : ${TMPDIR=/tmp} ; { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int x;" > $dummy.c ; for c in cc gcc c89 c99 ; do if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac ;' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE_ARCH}" in arm*|i386|m68k|ns32k|sh3*|sparc|vax) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. case "${UNAME_VERSION}" in Debian*) release='-gnu' ;; *) release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit 0 ;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; arc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; macppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme88k:OpenBSD:*:*) echo m88k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvmeppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; pmax:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sgi:OpenBSD:*:*) echo mipseb-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sun3:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi # According to Compaq, /usr/sbin/psrinfo has been available on # OSF/1 and Tru64 systems produced since 1995. I hope that # covers most systems running today. This code pipes the CPU # types through head -n 1, so we only detect the type of CPU 0. ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") UNAME_MACHINE="alpha" ;; "EV4.5 (21064)") UNAME_MACHINE="alpha" ;; "LCA4 (21066/21068)") UNAME_MACHINE="alpha" ;; "EV5 (21164)") UNAME_MACHINE="alphaev5" ;; "EV5.6 (21164A)") UNAME_MACHINE="alphaev56" ;; "EV5.6 (21164PC)") UNAME_MACHINE="alphapca56" ;; "EV5.7 (21164PC)") UNAME_MACHINE="alphapca57" ;; "EV6 (21264)") UNAME_MACHINE="alphaev6" ;; "EV6.7 (21264A)") UNAME_MACHINE="alphaev67" ;; "EV6.8CB (21264C)") UNAME_MACHINE="alphaev68" ;; "EV6.8AL (21264B)") UNAME_MACHINE="alphaev68" ;; "EV6.8CX (21264D)") UNAME_MACHINE="alphaev68" ;; "EV6.9A (21264/EV69A)") UNAME_MACHINE="alphaev69" ;; "EV7 (21364)") UNAME_MACHINE="alphaev7" ;; "EV7.9 (21364A)") UNAME_MACHINE="alphaev79" ;; esac # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit 0 ;; Alpha*:OpenVMS:*:*) echo alpha-hp-vms exit 0 ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit 0;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; *:[Mm]orph[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-morphos exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit 0 ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; DRS?6000:unix:4.0:6*) echo sparc-icl-nx6 exit 0 ;; DRS?6000:UNIX_SV:4.2*:7*) case `/usr/bin/uname -p` in sparc) echo sparc-icl-nx7 && exit 0 ;; esac ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit 0 ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit 0 ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit 0 ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c \ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ && exit 0 echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; Motorola:*:4.3:PL8-*) echo powerpc-harris-powermax exit 0 ;; Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) echo powerpc-harris-powermax exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit 0 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit 0 ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit 0 ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac fi if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac if [ ${HP_ARCH} = "hppa2.0w" ] then # avoid double evaluation of $set_cc_for_build test -n "$CC_FOR_BUILD" || eval $set_cc_for_build if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null then HP_ARCH="hppa2.0w" else HP_ARCH="hppa64" fi fi echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; *:UNICOS/mp:*:*) echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) # Determine whether the default compiler uses glibc. eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #if __GLIBC__ >= 2 LIBC=gnu #else LIBC= #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` # GNU/FreeBSD systems have a "k" prefix to indicate we are using # FreeBSD's kernel, but not the complete OS. case ${LIBC} in gnu) kernel_only='k' ;; esac echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; x86:Interix*:[34]*) echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' exit 0 ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) echo i${UNAME_MACHINE}-pc-mks exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i586-pc-interix exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit 0 ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit 0 ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; cris:Linux:*:*) echo cris-axis-linux-gnu exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; mips:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips #undef mipsel #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mipsel #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; mips64:Linux:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #undef CPU #undef mips64 #undef mips64el #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) CPU=mips64el #else #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) CPU=mips64 #else CPU= #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit 0 ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit 0 ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit 0 ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit 0 ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit 0 ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit 0 ;; sh64*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit 0 ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. # Set LC_ALL=C to ensure ld outputs messages in English. ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit 0 ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit 0 ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 LIBC=gnu # else LIBC=gnulibc1 # endif # else LIBC=gnulibc1 # endif #else #ifdef __INTEL_COMPILER LIBC=gnu #else LIBC=gnuaout #endif #endif EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit 0 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit 0 ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit 0 ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit 0 ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; i*86:*:5:[78]*) case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit 0 ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit 0 ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit 0 ;; mc68k:UNIX:SYSTEM5:3.51m) echo m68k-convergent-sysv exit 0 ;; M680?0:D-NIX:5.3:*) echo m68k-diab-dnix exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4.3${OS_REL} && exit 0 /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit 0 ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit 0 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit 0 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit 0 ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit 0 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit 0 ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit 0 ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit 0 ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit 0 ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; SX-6:SUPER-UX:*:*) echo sx6-nec-superux${UNAME_RELEASE} exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) case `uname -p` in *86) UNAME_PROCESSOR=i686 ;; powerpc) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` if test "$UNAME_PROCESSOR" = "x86"; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit 0 ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit 0 ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit 0 ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit 0 ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit 0 ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit 0 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit 0 ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit 0 ;; *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; SEI:*:*:SEIUX) echo mips-sei-seiux${UNAME_RELEASE} exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; c34*) echo c34-convex-bsd exit 0 ;; c38*) echo c38-convex-bsd exit 0 ;; c4*) echo c4-convex-bsd exit 0 ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: amavisd-milter-1.5.0/aclocal/missing000555 001751 001751 00000025577 11367260554 017415 0ustar00rehoreho000000 000000 #! /bin/sh # Common stub for a few missing GNU programs while installing. scriptversion=2006-05-10.23 # Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # Originally by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA # 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi run=: sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' sed_minuso='s/.* -o \([^ ]*\).*/\1/p' # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac else configure_ac=configure.in fi msg="missing on your system" case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= shift "$@" && exit 0 # Exit code 63 means version mismatch. This often happens # when the user try to use an ancient version of a tool on # a file that requires a minimum version. In this case we # we should proceed has if the program had been absent, or # if --run hadn't been passed. if test $? = 63; then run=: msg="probably too old" fi ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit --run try to run the given command, and emulate it if it fails Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' autom4te touch the output file, or create a stub one automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c help2man touch the output file lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file tar try tar, gnutar, gtar, then tar without non-portable flags yacc create \`y.tab.[ch]', if possible, from existing .[ch] Send bug reports to ." exit $? ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing $scriptversion (GNU Automake)" exit $? ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; esac # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect # the program). case $1 in lex|yacc) # Not GNU programs, they don't have --version. ;; tar) if test -n "$run"; then echo 1>&2 "ERROR: \`tar' requires --run" exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then exit 1 fi ;; *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone # running `$TOOL --version' or `$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi ;; esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. case $1 in aclocal*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`acconfig.h' or \`${configure_ac}'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake*) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; autom4te) echo 1>&2 "\ WARNING: \`$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. You can get \`$1' as part of \`Autoconf' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo "#! /bin/sh" echo "# Created by GNU Automake missing as a replacement of" echo "# $ $@" echo "exit 0" chmod +x $file exit 1 fi ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' $msg. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi if test ! -f y.tab.h; then echo >y.tab.h fi if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if test $# -ne 1; then eval LASTARG="\${$#}" case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; help2man) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the \`Help2man' package in order for those modifications to take effect. You can get \`Help2man' from any GNU archive site." file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" exit 1 fi ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is $msg. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... file=`echo "$*" | sed -n "$sed_output"` test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n ' /^@setfilename/{ s/.* \([^ ]*\) *$/\1/ p q }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi # If the file does not exist, the user really needs makeinfo; # let's fail without touching anything. test -f $file || exit 1 touch $file ;; tar) shift # We have already tried tar in the generic part. # Look for gnutar/gtar before invocation to avoid ugly error # messages. if (gnutar --version > /dev/null 2>&1); then gnutar "$@" && exit 0 fi if (gtar --version > /dev/null 2>&1); then gtar "$@" && exit 0 fi firstarg="$1" if shift; then case $firstarg in *o*) firstarg=`echo "$firstarg" | sed s/o//` tar "$firstarg" "$@" && exit 0 ;; esac case $firstarg in *h*) firstarg=`echo "$firstarg" | sed s/h//` tar "$firstarg" "$@" && exit 0 ;; esac fi echo 1>&2 "\ WARNING: I can't seem to be able to run \`tar' with the given arguments. You may want to install GNU tar or Free paxutils, or check the command line arguments." exit 1 ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and is $msg. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: amavisd-milter-1.5.0/aclocal/eilseq.m4000644 001751 001751 00000003565 10261320555 017523 0ustar00rehoreho000000 000000 # $Id: eilseq.m4,v 1.3 2005/07/01 20:02:53 reho Exp $ # # http://cvs.sourceforge.net/viewcvs.py/libiconv/m4/eilseq.m4 #serial 1 AC_PREREQ(2.50) # The EILSEQ errno value ought to be defined in , according to # ISO C 99 and POSIX. But some systems (like SunOS 4) don't define it, # and some systems (like BSD/OS) define it in not . # Define EILSEQ as a C macro and as a substituted macro in such a way that # 1. on all systems, after inclusion of , EILSEQ is usable, # 2. on systems where EILSEQ is defined elsewhere, we use the same numeric # value. AC_DEFUN([AC_EILSEQ], [ AC_REQUIRE([AC_PROG_CC])dnl dnl Check for any extra headers that could define EILSEQ. AC_CHECK_HEADERS(wchar.h) AC_CACHE_CHECK([for EILSEQ], ac_cv_decl_EILSEQ, [ AC_EGREP_CPP(yes,[ #include #ifdef EILSEQ yes #endif ], have_eilseq=1) if test -n "$have_eilseq"; then dnl EILSEQ exists in . Don't need to define EILSEQ ourselves. ac_cv_decl_EILSEQ=yes else AC_EGREP_CPP(yes,[ #include #if HAVE_WCHAR_H #include #endif #ifdef EILSEQ yes #endif ], have_eilseq=1) if test -n "$have_eilseq"; then dnl EILSEQ exists in some other system header. dnl Define it to the same value. _AC_COMPUTE_INT([EILSEQ], ac_cv_decl_EILSEQ, [ #include #if HAVE_WCHAR_H #include #endif /* The following two lines are a workaround against an autoconf-2.52 bug. */ #include #include ]) else dnl EILSEQ isn't defined by the system. Define EILSEQ ourselves. ac_cv_decl_EILSEQ=EINVAL fi fi ]) if test "$ac_cv_decl_EILSEQ" != yes; then AC_DEFINE_UNQUOTED([EILSEQ], [$ac_cv_decl_EILSEQ], [Define as good substitute value for EILSEQ.]) EILSEQ="$ac_cv_decl_EILSEQ" AC_SUBST(EILSEQ) fi ]) amavisd-milter-1.5.0/aclocal/ax_path_milter.m4000644 001751 001751 00000035005 11211021510 021214 0ustar00rehoreho000000 000000 dnl @synopsis AX_PATH_MILTER([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl dnl This macro tries to automatically find the library libmilter.a and dnl the header file "libmilter/mfapi.h", which are required when compiling dnl a milter for Sendmail. When successful, it sets the output variable dnl MILTER_LIBS to "-lmilter", MILTER_LDFLAGS to contain an -Lpathtolib dnl option, and MILTER_CPPFLAGS to contain an -Ipathtoinclude option, if dnl they are necessary. dnl dnl The easiest way to use this macro is something like: dnl dnl AX_PATH_MILTER([8.12],[ dnl LIBS="$MILTER_LIBS $LIBS" dnl LDFLAGS="$MILTER_LDFLAGS $LDFLAGS" dnl CPPFLAGS="$CPPFLAGS $MILTER_CPPFLAGS" dnl ],[ dnl AC_MSG_ERROR([required milter library and header not found]) dnl ]) dnl dnl If the macro is successful, it just adds any flags to the necessary dnl environment. If it is not successful, it would likely be a fatal dnl error, because if an application is linking with libmilter.a, dnl it is probably because it is a milter. dnl dnl There are two optional "--with" options for configure which are added. dnl If they are specified, they override any searching that is done. dnl They are: dnl dnl --with-sendmail-base= This option is used to explicitly dnl specify the base of the sendmail distribution. dnl dnl --with-sendmail-obj= The option is used to explicitly specify dnl the "obj.*" subdirectory in the sendmail distribution dnl that should be used. dnl dnl When sendmail-base is not specified, the current environment is first dnl tested to see if the header and library are available, and if so dnl MILTER_LDFLAGS and MILTER_CPPFLAGS are left empty. dnl dnl There are two places that are searched for the sendmail base dnl directory. The first location is one directory down from the dnl current directory. It checks if there is a directory of the dnl form sendmail-8.1*, limited to version 8.12.x or higher, then dnl chooses the directory with the highest version number. dnl If that method does not succeed, it then looks in the file dnl /etc/mail/sendmail.cf for the directory it was built from, dnl and uses the base of that distribution. If neither of these dnl methods work, then it fails. dnl dnl There are two methods for finding the "obj.*" directory when it is dnl not specified. The first is to try to run sendmail's Build program dnl with the -M option which will print out the name of the obj. directory dnl for the tool in the directory where it is run from. If this dnl does not work, is looks for the newest directory of the dnl form "obj.*" in the sendmail base directory. dnl dnl Two addition output variables that are defined, whether or not the dnl files are found are SENDMAIL_BASE_DIR and SENDMAIL_OBJ_DIR, which dnl are the suspected location of the sendmail base directory and dnl obj.* subdirectory. dnl dnl NOTE: POSIX threads MUST be configured BEFORE this function is called dnl or it will not find libmilter.a even if it exists. The easiest way is dnl to use the ACX_PTHREAD macro by Steven G. Johnson and Alejandro Forero dnl Cuervo which is available from the Autoconf Macro Archive. dnl dnl @version $Id: ax_path_milter.m4,v 1.3 2009/06/01 18:51:52 reho Exp $ dnl @author Tim Toolan dnl ############################################################################### AC_DEFUN([AX_PATH_MILTER], [ # Used to indicate success or failure of this function. ax_path_milter_ok=no # Convert sections of MINIMUM-VERSION to three digit numbers by adding zeros. # For example 8.12.9 would become 008.012.009 ac_milter_minimum_version=`echo "$1" | sed 's,\([[0-9]]*\),x\1x,g;s,x\([[0-9]]\)x,x0\1x,g;s,x\([[0-9]][[0-9]]\)x,x0\1x,g;s,x,,g'` # Add options --with-sendmail --with-sendmail-base and --with-sendmail-obj # to configure. AC_ARG_WITH([sendmail], [ --with-sendmail= base directory of sendmail installation]) AC_ARG_WITH([sendmail-base], [ --with-sendmail-base= base directory of sendmail distribution]) AC_ARG_WITH([sendmail-obj], [ --with-sendmail-obj= obj.* subdirectory in sendmail distribution]) # Check for functions required by libmilter. AC_CHECK_FUNC(inet_aton, [], [AC_SEARCH_LIBS(inet_aton, [socket nsl resolv])]) AC_CHECK_FUNC(socket, [], [AC_SEARCH_LIBS(socket, [socket nsl])]) AC_CHECK_FUNC(gethostbyname, [], [AC_SEARCH_LIBS(gethostbyname, [socket nsl])]) # Check if the linker accepts --rpath (for Darwin) AC_MSG_CHECKING([if ld accepts --rpath]) SAVEDLDFLAGS=$LDFLAGS LDFLAGS=$LDFLAGS" -Wl,--rpath=/" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], [rpath="--rpath="; ldrpath=yes], [rpath="-L"; ldrpath=no]) LDFLAGS=$SAVEDLDFLAGS AC_MSG_RESULT([$ldrpath]) ############################################################################### # # If neither --with-sendmail-base or --with-sendmail-obj is specified # check the existing environment first for mfapi.h and libmilter without # modifying CPPFLAGS, LDFLAGS, and LIBS first. # if test "x$with_sendmail_base$with_sendmail_obj" = "x" ; then if test "x$with_sendmail" != "x" ; then CPPFLAGS="$CPPFLAGS -I$with_sendmail/include" LDFLAGS="$LDFLAGS -L$with_sendmail/lib -Wl,$rpath$with_sendmail/lib" AC_MSG_CHECKING([for sendmail install directory]) AC_MSG_RESULT([$with_sendmail]) else AC_MSG_CHECKING([for sendmail install directory]) AC_MSG_RESULT([default]) fi AC_CHECK_HEADER([libmilter/mfapi.h],[ AC_CHECK_LIB([milter],[smfi_main],[ # both tests succeeded so indicate success ax_path_milter_ok=yes # add -lmilter to the libraries to link MILTER_LIBS="-lmilter" ]) ]) # Debian use for libmilter.a /usr/lib/libmilter instead of /usr/lib if test "$ax_path_milter_ok" = "no" ; then unset ac_cv_lib_milter_smfi_main ac_milter_save_LDFLAGS="$LDLFAGS" MILTER_LDFLAGS="-L/usr/lib/libmilter" LDFLAGS="$MILTER_LDFLAGS $LDFLAGS" AC_CHECK_HEADER([libmilter/mfapi.h],[ AC_CHECK_LIB([milter],[smfi_main],[ # both tests succeeded so indicate success ax_path_milter_ok=yes # add -lmilter to the libraries to link MILTER_LIBS="-lmilter" ]) ]) LDFLAGS="$ac_milter_save_LDFLAGS" fi if test "$ax_path_milter_ok" = "no" ; then # Unset the cached test results because we will be trying them again later. ac_milter_tmp=abcdefg if unset ac_milter_tmp 2> /dev/null ; then unset ac_cv_header_libmilter_mfapi_h unset ac_cv_lib_milter_smfi_main else AC_MSG_WARN( [system doesn't have unset so either use --with-sendmail-base or set LDFLAGS and CPPFLAGS with the necessary -L and -I options]) fi fi fi ############################################################################### # # If didn't already fine necessary files then search. # if test "$ax_path_milter_ok" = "no" ; then ############################################################################# # # Determine the sendmail base directory and set SENDMAIL_BASE_DIR. # if test "x$with_sendmail_base" != "x" ; then AC_MSG_CHECKING([for sendmail base directory]) # set SENDMAIL_BASE_DIR to the one specified by--with-sendmail-base SENDMAIL_BASE_DIR="$with_sendmail_base" AC_MSG_RESULT([$SENDMAIL_BASE_DIR]) else AC_MSG_CHECKING([for sendmail base directory in ../ ]) # # --with-sendmail-base is not used, so we will try to determine it # # 1) List all directories one level down that look like sendmail. # 2) Select ones that are sendmail 8.12 or higher (including 8.13 # versions when they come out). # 3) Replace any single digit last version numbers with a two digit # version number (ie. 8.12.9 becomes 8.12.09). # 4) Sort all of the directories found in reverse order. # 5) Take the first one (the highest version). # 6) Restore the single digit version numbers. # ac_milter_tmp=`ls -d ../sendmail-8.1* 2> /dev/null | grep '../sendmail-8.1[[2-9]]' | sed 's,\.\([[0-9]]\)$,.0\1,' | sort -r | sed '1q' | sed 's,\.0\([[0-9]]\)$,.\1,'` # Convert found version sections to three digit numbers by adding zeros. ac_milter_found_version=`echo "$ac_milter_tmp" | sed 's,.*/sendmail-,,;s,\([[0-9]]*\),x\1x,g;s,x\([[0-9]]\)x,x0\1x,g;s,x\([[0-9]][[0-9]]\)x,x0\1x,g;s,x,,g'` # If ac_milter_minimum_version is equal to ac_milter_lower_version, then # the found version is greater than or equal to the minumum version. # Pick the version string that is the lesser of the two. # An empty string would be less than anything. # In short, ac_milter_version_ok will equal yes if the version is ok, # and no otherwise. ac_milter_version_ok=`echo "x$ac_milter_minimum_version x$ac_milter_found_version" | sort | sed '1q' | sed "s,x${ac_milter_minimum_version},yes,;s,x${ac_milter_found_version},no," ` # If we have something add the current directory to it. if test "x$ac_milter_tmp" != "x" ; then ac_milter_tmp="`pwd`/$ac_milter_tmp" fi if test -r "${ac_milter_tmp}/include/libmilter/mfapi.h" && \ test "$ac_milter_version_ok" = "yes" ; then # The file mfapi.h exists so we will use this as SENDMAIL_BASE_DIR. SENDMAIL_BASE_DIR="$ac_milter_tmp" AC_MSG_RESULT([$SENDMAIL_BASE_DIR]) else AC_MSG_RESULT([no]) AC_MSG_CHECKING([for sendmail base from /etc/mail/sendmail.cf]) # # The previous method to find SENDMAIL_BASE_DIR failed, so we will # try this method. # # 1) Check for a line in /etc/mail/sendmail.cf of the form: # ##### in /some/path/sendmail-8.x.x/more/path # This is the directory that the sendmail.cf file was built in. # 2) Take the first occurrence if there are more than one. # 3) Remove the leading "##### in ". # 4) Remove everything after the sendmail-8.x.x path component. # dnl # Note that the following expression only should not use double dnl # square brackets because for some reason, possibly having to dnl # do with the pound sign, m4 doesn't convert them to single brackets. dnl # ac_milter_tmp=`grep "^##### in /" /etc/mail/sendmail.cf 2> /dev/null | grep "/sendmail-8.1" | sed '1q' | sed 's,^##### in ,,' | sed 's,\(/sendmail-8\.[0-9.]*\).*,\1,'` # Convert found version sections to three digit numbers by adding zeros. ac_milter_found_version=`echo "$ac_milter_tmp" | sed 's,.*/sendmail-,,;s,\([[0-9]]*\),x\1x,g;s,x\([[0-9]]\)x,x0\1x,g;s,x\([[0-9]][[0-9]]\)x,x0\1x,g;s,x,,g'` # ac_milter_version_ok will equal yes if the version is ok, otherwise no. ac_milter_version_ok=`echo "x$ac_milter_minimum_version x$ac_milter_found_version" | sort | sed '1q' | sed "s,x${ac_milter_minimum_version},yes,;s,x${ac_milter_found_version},no," ` if test -r "${ac_milter_tmp}/include/libmilter/mfapi.h" && \ test "$ac_milter_version_ok" = "yes" ; then # The file mfapi.h exists so we will use this as SENDMAIL_BASE_DIR. SENDMAIL_BASE_DIR="$ac_milter_tmp" AC_MSG_RESULT([$SENDMAIL_BASE_DIR]) else AC_MSG_RESULT([no]) fi fi fi ############################################################################# # # Determine the sendmail obj.* directory and set SENDMAIL_OBJ_DIR. # We can only do this if we found SENDMAIL_BASE_DIR. # if test "x$SENDMAIL_BASE_DIR" != "x" ; then if test "x$with_sendmail_obj" != "x" ; then # set SENDMAIL_OBJ_DIR to the one specified by--with-sendmail-obj SENDMAIL_OBJ_DIR="$with_sendmail_obj" else AC_MSG_CHECKING([for sendmail obj.* subdirectory using Build -M]) # # --with-sendmail-obj is not used, so we will try to determine it # # Try to run sendmail's Build program with the -M option which will # print out the name of the obj. directory for the tool in the # directory where it is run from. # ac_milter_tmp=`(cd ${SENDMAIL_BASE_DIR}/libmilter 1> /dev/null ; ./Build -M ) 2> /dev/null` if test -f "${ac_milter_tmp}/libmilter.a" ; then # libmilter.a exists so this is the one we will choose # Remove beginning and end of path from obj.* directory. SENDMAIL_OBJ_DIR=`echo "$ac_milter_tmp" | sed 's,/libmilter$,,;s,.*/,,'` AC_MSG_RESULT([${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}]) else AC_MSG_RESULT([no]) AC_MSG_CHECKING([for sendmail obj.* subdirectory using ls]) # # List all directories of the form "obj." in the sendmail base # directory, and choose the one with the latest modification date. # ac_milter_tmp=`ls -dt ${SENDMAIL_BASE_DIR}/obj.*/libmilter 2> /dev/null | sed '1q'` if test -f "${ac_milter_tmp}/libmilter.a" ; then # libmilter.a exists so this is the one we will choose # Remove beginning and end of path from obj.* directory. SENDMAIL_OBJ_DIR=`echo "$ac_milter_tmp" | sed 's,/libmilter$,,;s,.*/,,'` AC_MSG_RESULT([${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}]) else AC_MSG_RESULT([no]) fi fi fi fi ############################################################################# # # If we have both SENDMAIL_BASE_DIR and SENDMAIL_OBJ_DIR we will check # for the necessary files. # if test "x$SENDMAIL_BASE_DIR" != "x" && \ test "x$SENDMAIL_OBJ_DIR" != "x" ; then # Save and modify CPPFLAGS. ac_milter_save_CPPFLAGS="$CPPFLAGS" MILTER_CPPFLAGS="-I$SENDMAIL_BASE_DIR/include" CPPFLAGS="$CPPFLAGS $MILTER_CPPFLAGS" # Save and modify LDFLAGS. ac_milter_save_LDFLAGS="$LDLFAGS" MILTER_LDFLAGS="-L${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}/libmilter" LDFLAGS="$MILTER_LDFLAGS $LDFLAGS" AC_CHECK_HEADER([libmilter/mfapi.h],[ AC_CHECK_LIB([milter],[smfi_main],[ # both tests succeeded so add -lmilter to the libraries to link MILTER_LIBS="-lmilter" # indicate success ax_path_milter_ok=yes ]) ]) # Restore the modified environment CPPFLAGS="$ac_milter_save_CPPFLAGS" LDFLAGS="$ac_milter_save_LDFLAGS" fi fi # If failure, clear MILTER_LIBS, MILTER_LDFLAGS and MILTER_CPPFLAGS. if test "$ax_path_milter_ok" = "no" ; then MILTER_CPPFLAGS="" MILTER_LIBS="" MILTER_LDFLAGS="" fi # export these to the make environment AC_SUBST([MILTER_LIBS]) AC_SUBST([MILTER_CPPFLAGS]) AC_SUBST([MILTER_LDFLAGS]) AC_SUBST([SENDMAIL_BASE_DIR]) AC_SUBST([SENDMAIL_OBJ_DIR]) # Indicate status of checking for libmilter stuff. AC_MSG_CHECKING([if files required by libmilter are present]) # Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND. if test "$ax_path_milter_ok" = "yes" ; then AC_MSG_RESULT([yes]) $2 else AC_MSG_RESULT([no]) $3 fi ])dnl amavisd-milter-1.5.0/aclocal/compile000555 001751 001751 00000007173 11367260554 017364 0ustar00rehoreho000000 000000 #! /bin/sh # Wrapper for compilers which do not understand `-c -o'. scriptversion=2005-05-14.22 # Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # This file is maintained in Automake, please report # bugs to or send patches to # . case $1 in '') echo "$0: No command. Try \`$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) cat <<\EOF Usage: compile [--help] [--version] PROGRAM [ARGS] Wrapper for compilers which do not understand `-c -o'. Remove `-o dest.o' from ARGS, run PROGRAM with the remaining arguments, and rename the output as expected. If you are trying to build a whole package this is not the right script to run: please start by reading the file `INSTALL'. Report bugs to . EOF exit $? ;; -v | --v*) echo "compile $scriptversion" exit $? ;; esac ofile= cfile= eat= for arg do if test -n "$eat"; then eat= else case $1 in -o) # configure might choose to run compile as `compile cc -o foo foo.c'. # So we strip `-o arg' only if arg is an object. eat=1 case $2 in *.o | *.obj) ofile=$2 ;; *) set x "$@" -o "$2" shift ;; esac ;; *.c) cfile=$1 set x "$@" "$1" shift ;; *) set x "$@" "$1" shift ;; esac fi shift done if test -z "$ofile" || test -z "$cfile"; then # If no `-o' option was seen then we might have been invoked from a # pattern rule where we don't need one. That is ok -- this is a # normal compilation that the losing compiler can handle. If no # `.c' file was seen then we are probably linking. That is also # ok. exec "$@" fi # Name of file we expect compiler to create. cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'` # Create the lock directory. # Note: use `[/.-]' here to ensure that we don't use the same name # that we are using for the .o file. Also, base the name on the expected # object file name, since that is what matters with a parallel build. lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d while true; do if mkdir "$lockdir" >/dev/null 2>&1; then break fi sleep 1 done # FIXME: race condition here if user kills between mkdir and trap. trap "rmdir '$lockdir'; exit 1" 1 2 15 # Run the compile. "$@" ret=$? if test -f "$cofile"; then mv "$cofile" "$ofile" elif test -f "${cofile}bj"; then mv "${cofile}bj" "$ofile" fi rmdir "$lockdir" exit $ret # Local Variables: # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" # time-stamp-end: "$" # End: amavisd-milter-1.5.0/compat/fts_open.c000644 001751 001751 00000073466 11101725204 017646 0ustar00rehoreho000000 000000 /* $Id: fts_open.c,v 1.4 2008/10/29 00:12:52 reho Exp $ */ /* TNFTPD ORIGINAL: libnetbsd/fts_open.c */ /* $NetBSD: fts_open.c,v 1.10 2008/09/27 15:14:29 lukem Exp $ */ /* from NetBSD: fts.c,v 1.34 2008/09/27 15:12:00 lukem Exp */ /*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "compat.h" static FTSENT *fts_alloc(FTS *, const char *, size_t); static FTSENT *fts_build(FTS *, int); static void fts_free(FTSENT *); static void fts_lfree(FTSENT *); static void fts_load(FTS *, FTSENT *); static size_t fts_maxarglen(char * const *); static size_t fts_pow2(size_t); static int fts_palloc(FTS *, size_t); static void fts_padjust(FTS *, FTSENT *); static FTSENT *fts_sort(FTS *, FTSENT *, size_t); static unsigned short fts_stat(FTS *, FTSENT *, int); static int fts_safe_changedir(const FTS *, const FTSENT *, int, const char *); #if defined(ALIGNBYTES) && defined(ALIGN) #define FTS_ALLOC_ALIGNED 1 #else #undef FTS_ALLOC_ALIGNED #endif #define ISDOT(a) (a[0] == '.' && (!a[1] || (a[1] == '.' && !a[2]))) #define CLR(opt) (sp->fts_options &= ~(opt)) #define ISSET(opt) (sp->fts_options & (opt)) #define SET(opt) (sp->fts_options |= (opt)) #define CHDIR(sp, path) (!ISSET(FTS_NOCHDIR) && chdir(path)) #define FCHDIR(sp, fd) (!ISSET(FTS_NOCHDIR) && fchdir(fd)) /* fts_build flags */ #define BCHILD 1 /* fts_children */ #define BNAMES 2 /* fts_children, names only */ #define BREAD 3 /* fts_read */ #ifndef DTF_HIDEW #undef FTS_WHITEOUT #endif FTS * fts_open(char * const *argv, int options, int (*compar)(const FTSENT **, const FTSENT **)) { FTS *sp; FTSENT *p, *root; size_t nitems; FTSENT *parent, *tmp = NULL; /* pacify gcc */ size_t len; /* Options check. */ if (options & ~FTS_OPTIONMASK) { errno = EINVAL; return (NULL); } /* Allocate/initialize the stream */ if ((sp = malloc((unsigned int)sizeof(FTS))) == NULL) return (NULL); memset(sp, 0, sizeof(FTS)); sp->fts_compar = compar; sp->fts_options = options; /* Logical walks turn on NOCHDIR; symbolic links are too hard. */ if (ISSET(FTS_LOGICAL)) SET(FTS_NOCHDIR); /* * Start out with 1K of path space, and enough, in any case, * to hold the user's paths. */ if (fts_palloc(sp, MAX(fts_maxarglen(argv), MAXPATHLEN))) goto mem1; /* Allocate/initialize root's parent. */ if ((parent = fts_alloc(sp, "", 0)) == NULL) goto mem2; parent->fts_level = FTS_ROOTPARENTLEVEL; /* Allocate/initialize root(s). */ for (root = NULL, nitems = 0; *argv; ++argv, ++nitems) { /* Don't allow zero-length paths. */ if ((len = strlen(*argv)) == 0) { errno = ENOENT; goto mem3; } if ((p = fts_alloc(sp, *argv, len)) == NULL) goto mem3; p->fts_level = FTS_ROOTLEVEL; p->fts_parent = parent; p->fts_accpath = p->fts_name; p->fts_info = fts_stat(sp, p, ISSET(FTS_COMFOLLOW)); /* Command-line "." and ".." are real directories. */ if (p->fts_info == FTS_DOT) p->fts_info = FTS_D; /* * If comparison routine supplied, traverse in sorted * order; otherwise traverse in the order specified. */ if (compar) { p->fts_link = root; root = p; } else { p->fts_link = NULL; if (root == NULL) tmp = root = p; else { tmp->fts_link = p; tmp = p; } } } if (compar && nitems > 1) root = fts_sort(sp, root, nitems); /* * Allocate a dummy pointer and make fts_read think that we've just * finished the node before the root(s); set p->fts_info to FTS_INIT * so that everything about the "current" node is ignored. */ if ((sp->fts_cur = fts_alloc(sp, "", 0)) == NULL) goto mem3; sp->fts_cur->fts_link = root; sp->fts_cur->fts_info = FTS_INIT; /* * If using chdir(2), grab a file descriptor pointing to dot to insure * that we can get back here; this could be avoided for some paths, * but almost certainly not worth the effort. Slashes, symbolic links, * and ".." are all fairly nasty problems. Note, if we can't get the * descriptor we run anyway, just more slowly. */ if (!ISSET(FTS_NOCHDIR)) { if ((sp->fts_rfd = open(".", O_RDONLY, 0)) == -1) SET(FTS_NOCHDIR); else if (fcntl(sp->fts_rfd, F_SETFD, FD_CLOEXEC) == -1) { close(sp->fts_rfd); SET(FTS_NOCHDIR); } } if (nitems == 0) fts_free(parent); return (sp); mem3: fts_lfree(root); fts_free(parent); mem2: free(sp->fts_path); mem1: free(sp); return (NULL); } static void fts_load(FTS *sp, FTSENT *p) { size_t len; char *cp; /* * Load the stream structure for the next traversal. Since we don't * actually enter the directory until after the preorder visit, set * the fts_accpath field specially so the chdir gets done to the right * place and the user can access the first node. From fts_open it's * known that the path will fit. */ len = p->fts_pathlen = p->fts_namelen; memmove(sp->fts_path, p->fts_name, len + 1); if ((cp = strrchr(p->fts_name, '/')) && (cp != p->fts_name || cp[1])) { len = strlen(++cp); memmove(p->fts_name, cp, len + 1); p->fts_namelen = len; } p->fts_accpath = p->fts_path = sp->fts_path; sp->fts_dev = p->fts_dev; } int fts_close(FTS *sp) { FTSENT *freep, *p; int saved_errno = 0; /* * This still works if we haven't read anything -- the dummy structure * points to the root list, so we step through to the end of the root * list which has a valid parent pointer. */ if (sp->fts_cur) { if (ISSET(FTS_SYMFOLLOW)) (void)close(sp->fts_cur->fts_symfd); for (p = sp->fts_cur; p->fts_level >= FTS_ROOTLEVEL;) { freep = p; p = p->fts_link ? p->fts_link : p->fts_parent; fts_free(freep); } fts_free(p); } /* Free up child linked list, sort array, path buffer. */ if (sp->fts_child) fts_lfree(sp->fts_child); if (sp->fts_array) free(sp->fts_array); free(sp->fts_path); /* Return to original directory, save errno if necessary. */ if (!ISSET(FTS_NOCHDIR)) { if (fchdir(sp->fts_rfd) == -1) saved_errno = errno; (void)close(sp->fts_rfd); } /* Free up the stream pointer. */ free(sp); if (saved_errno) { errno = saved_errno; return -1; } return 0; } #if !defined(__FTS_COMPAT_TAILINGSLASH) /* * Special case of "/" at the end of the path so that slashes aren't * appended which would cause paths to be written as "....//foo". */ #define NAPPEND(p) \ (p->fts_path[p->fts_pathlen - 1] == '/' \ ? p->fts_pathlen - 1 : p->fts_pathlen) #else /* !defined(__FTS_COMPAT_TAILINGSLASH) */ /* * compatibility with the old behaviour. * * Special case a root of "/" so that slashes aren't appended which would * cause paths to be written as "//foo". */ #define NAPPEND(p) \ (p->fts_level == FTS_ROOTLEVEL && p->fts_pathlen == 1 && \ p->fts_path[0] == '/' ? 0 : p->fts_pathlen) #endif /* !defined(__FTS_COMPAT_TAILINGSLASH) */ FTSENT * fts_read(FTS *sp) { FTSENT *p, *tmp; int instr; char *t; int saved_errno; /* If finished or unrecoverable error, return NULL. */ if (sp->fts_cur == NULL || ISSET(FTS_STOP)) return (NULL); /* Set current node pointer. */ p = sp->fts_cur; /* Save and zero out user instructions. */ instr = p->fts_instr; p->fts_instr = FTS_NOINSTR; /* Any type of file may be re-visited; re-stat and re-turn. */ if (instr == FTS_AGAIN) { p->fts_info = fts_stat(sp, p, 0); return (p); } /* * Following a symlink -- SLNONE test allows application to see * SLNONE and recover. If indirecting through a symlink, have * keep a pointer to current location. If unable to get that * pointer, follow fails. */ if (instr == FTS_FOLLOW && (p->fts_info == FTS_SL || p->fts_info == FTS_SLNONE)) { p->fts_info = fts_stat(sp, p, 1); if (p->fts_info == FTS_D && !ISSET(FTS_NOCHDIR)) { if ((p->fts_symfd = open(".", O_RDONLY, 0)) == -1) { p->fts_errno = errno; p->fts_info = FTS_ERR; } else if (fcntl(p->fts_symfd, F_SETFD, FD_CLOEXEC) == -1) { p->fts_errno = errno; p->fts_info = FTS_ERR; close(p->fts_symfd); } else p->fts_flags |= FTS_SYMFOLLOW; } return (p); } /* Directory in pre-order. */ if (p->fts_info == FTS_D) { /* If skipped or crossed mount point, do post-order visit. */ if (instr == FTS_SKIP || (ISSET(FTS_XDEV) && p->fts_dev != sp->fts_dev)) { if (p->fts_flags & FTS_SYMFOLLOW) (void)close(p->fts_symfd); if (sp->fts_child) { fts_lfree(sp->fts_child); sp->fts_child = NULL; } p->fts_info = FTS_DP; return (p); } /* Rebuild if only read the names and now traversing. */ if (sp->fts_child && ISSET(FTS_NAMEONLY)) { CLR(FTS_NAMEONLY); fts_lfree(sp->fts_child); sp->fts_child = NULL; } /* * Cd to the subdirectory. * * If have already read and now fail to chdir, whack the list * to make the names come out right, and set the parent errno * so the application will eventually get an error condition. * Set the FTS_DONTCHDIR flag so that when we logically change * directories back to the parent we don't do a chdir. * * If haven't read do so. If the read fails, fts_build sets * FTS_STOP or the fts_info field of the node. */ if (sp->fts_child) { if (fts_safe_changedir(sp, p, -1, p->fts_accpath)) { p->fts_errno = errno; p->fts_flags |= FTS_DONTCHDIR; for (p = sp->fts_child; p; p = p->fts_link) p->fts_accpath = p->fts_parent->fts_accpath; } } else if ((sp->fts_child = fts_build(sp, BREAD)) == NULL) { if (ISSET(FTS_STOP)) return (NULL); return (p); } p = sp->fts_child; sp->fts_child = NULL; goto name; } /* Move to the next node on this level. */ next: tmp = p; if ((p = p->fts_link) != NULL) { fts_free(tmp); /* * If reached the top, return to the original directory, and * load the paths for the next root. */ if (p->fts_level == FTS_ROOTLEVEL) { if (FCHDIR(sp, sp->fts_rfd)) { SET(FTS_STOP); return (NULL); } fts_load(sp, p); return (sp->fts_cur = p); } /* * User may have called fts_set on the node. If skipped, * ignore. If followed, get a file descriptor so we can * get back if necessary. */ if (p->fts_instr == FTS_SKIP) goto next; if (p->fts_instr == FTS_FOLLOW) { p->fts_info = fts_stat(sp, p, 1); if (p->fts_info == FTS_D && !ISSET(FTS_NOCHDIR)) { if ((p->fts_symfd = open(".", O_RDONLY, 0)) == -1) { p->fts_errno = errno; p->fts_info = FTS_ERR; } else if (fcntl(p->fts_symfd, F_SETFD, FD_CLOEXEC) == -1) { p->fts_errno = errno; p->fts_info = FTS_ERR; close(p->fts_symfd); } else p->fts_flags |= FTS_SYMFOLLOW; } p->fts_instr = FTS_NOINSTR; } name: t = sp->fts_path + NAPPEND(p->fts_parent); *t++ = '/'; memmove(t, p->fts_name, (size_t)(p->fts_namelen + 1)); return (sp->fts_cur = p); } /* Move up to the parent node. */ p = tmp->fts_parent; fts_free(tmp); if (p->fts_level == FTS_ROOTPARENTLEVEL) { /* * Done; free everything up and set errno to 0 so the user * can distinguish between error and EOF. */ fts_free(p); errno = 0; return (sp->fts_cur = NULL); } /* Nul terminate the pathname. */ sp->fts_path[p->fts_pathlen] = '\0'; /* * Return to the parent directory. If at a root node or came through * a symlink, go back through the file descriptor. Otherwise, cd up * one directory. */ if (p->fts_level == FTS_ROOTLEVEL) { if (FCHDIR(sp, sp->fts_rfd)) { SET(FTS_STOP); return (NULL); } } else if (p->fts_flags & FTS_SYMFOLLOW) { if (FCHDIR(sp, p->fts_symfd)) { saved_errno = errno; (void)close(p->fts_symfd); errno = saved_errno; SET(FTS_STOP); return (NULL); } (void)close(p->fts_symfd); } else if (!(p->fts_flags & FTS_DONTCHDIR) && fts_safe_changedir(sp, p->fts_parent, -1, "..")) { SET(FTS_STOP); return (NULL); } p->fts_info = p->fts_errno ? FTS_ERR : FTS_DP; return (sp->fts_cur = p); } /* * Fts_set takes the stream as an argument although it's not used in this * implementation; it would be necessary if anyone wanted to add global * semantics to fts using fts_set. An error return is allowed for similar * reasons. */ /* ARGSUSED */ int fts_set(FTS *sp, FTSENT *p, int instr) { if (instr && instr != FTS_AGAIN && instr != FTS_FOLLOW && instr != FTS_NOINSTR && instr != FTS_SKIP) { errno = EINVAL; return (1); } p->fts_instr = instr; return (0); } FTSENT * fts_children(FTS *sp, int instr) { FTSENT *p; int fd; if (instr && instr != FTS_NAMEONLY) { errno = EINVAL; return (NULL); } /* Set current node pointer. */ p = sp->fts_cur; /* * Errno set to 0 so user can distinguish empty directory from * an error. */ errno = 0; /* Fatal errors stop here. */ if (ISSET(FTS_STOP)) return (NULL); /* Return logical hierarchy of user's arguments. */ if (p->fts_info == FTS_INIT) return (p->fts_link); /* * If not a directory being visited in pre-order, stop here. Could * allow FTS_DNR, assuming the user has fixed the problem, but the * same effect is available with FTS_AGAIN. */ if (p->fts_info != FTS_D /* && p->fts_info != FTS_DNR */) return (NULL); /* Free up any previous child list. */ if (sp->fts_child) fts_lfree(sp->fts_child); if (instr == FTS_NAMEONLY) { SET(FTS_NAMEONLY); instr = BNAMES; } else instr = BCHILD; /* * If using chdir on a relative path and called BEFORE fts_read does * its chdir to the root of a traversal, we can lose -- we need to * chdir into the subdirectory, and we don't know where the current * directory is, so we can't get back so that the upcoming chdir by * fts_read will work. */ if (p->fts_level != FTS_ROOTLEVEL || p->fts_accpath[0] == '/' || ISSET(FTS_NOCHDIR)) return (sp->fts_child = fts_build(sp, instr)); if ((fd = open(".", O_RDONLY, 0)) == -1) return (sp->fts_child = NULL); sp->fts_child = fts_build(sp, instr); if (fchdir(fd)) { (void)close(fd); return (NULL); } (void)close(fd); return (sp->fts_child); } /* * This is the tricky part -- do not casually change *anything* in here. The * idea is to build the linked list of entries that are used by fts_children * and fts_read. There are lots of special cases. * * The real slowdown in walking the tree is the stat calls. If FTS_NOSTAT is * set and it's a physical walk (so that symbolic links can't be directories), * we can do things quickly. First, if it's a 4.4BSD file system, the type * of the file is in the directory entry. Otherwise, we assume that the number * of subdirectories in a node is equal to the number of links to the parent. * The former skips all stat calls. The latter skips stat calls in any leaf * directories and for any files after the subdirectories in the directory have * been found, cutting the stat calls by about 2/3. */ static FTSENT * fts_build(FTS *sp, int type) { struct dirent *dp; FTSENT *p, *head; size_t nitems; FTSENT *cur, *tail; DIR *dirp; void *oldaddr; size_t dnamlen; int cderrno, descend, len, level, nlinks, saved_errno, nostat, doadjust; size_t maxlen; #ifdef FTS_WHITEOUT int oflag; #endif char *cp = NULL; /* pacify gcc */ /* Set current node pointer. */ cur = sp->fts_cur; /* * Open the directory for reading. If this fails, we're done. * If being called from fts_read, set the fts_info field. */ #ifdef FTS_WHITEOUT if (ISSET(FTS_WHITEOUT)) oflag = DTF_NODUP|DTF_REWIND; else oflag = DTF_HIDEW|DTF_NODUP|DTF_REWIND; #else #define __opendir2(path, flag) opendir(path) #endif if ((dirp = __opendir2(cur->fts_accpath, oflag)) == NULL) { if (type == BREAD) { cur->fts_info = FTS_DNR; cur->fts_errno = errno; } return (NULL); } /* * Nlinks is the number of possible entries of type directory in the * directory if we're cheating on stat calls, 0 if we're not doing * any stat calls at all, -1 if we're doing stats on everything. */ if (type == BNAMES) { nlinks = 0; nostat = 1; } else if (ISSET(FTS_NOSTAT) && ISSET(FTS_PHYSICAL)) { nlinks = cur->fts_nlink - (ISSET(FTS_SEEDOT) ? 0 : 2); nostat = 1; } else { nlinks = -1; nostat = 0; } #ifdef notdef (void)printf("nlinks == %d (cur: %d)\n", nlinks, cur->fts_nlink); (void)printf("NOSTAT %d PHYSICAL %d SEEDOT %d\n", ISSET(FTS_NOSTAT), ISSET(FTS_PHYSICAL), ISSET(FTS_SEEDOT)); #endif /* * If we're going to need to stat anything or we want to descend * and stay in the directory, chdir. If this fails we keep going, * but set a flag so we don't chdir after the post-order visit. * We won't be able to stat anything, but we can still return the * names themselves. Note, that since fts_read won't be able to * chdir into the directory, it will have to return different path * names than before, i.e. "a/b" instead of "b". Since the node * has already been visited in pre-order, have to wait until the * post-order visit to return the error. There is a special case * here, if there was nothing to stat then it's not an error to * not be able to stat. This is all fairly nasty. If a program * needed sorted entries or stat information, they had better be * checking FTS_NS on the returned nodes. */ cderrno = 0; if (nlinks || type == BREAD) { if (fts_safe_changedir(sp, cur, dirfd(dirp), NULL)) { if (nlinks && type == BREAD) cur->fts_errno = errno; cur->fts_flags |= FTS_DONTCHDIR; descend = 0; cderrno = errno; } else descend = 1; } else descend = 0; /* * Figure out the max file name length that can be stored in the * current path -- the inner loop allocates more path as necessary. * We really wouldn't have to do the maxlen calculations here, we * could do them in fts_read before returning the path, but it's a * lot easier here since the length is part of the dirent structure. * * If not changing directories set a pointer so that can just append * each new name into the path. */ len = NAPPEND(cur); if (ISSET(FTS_NOCHDIR)) { cp = sp->fts_path + len; *cp++ = '/'; } len++; maxlen = sp->fts_pathlen - len; level = cur->fts_level + 1; /* Read the directory, attaching each entry to the `link' pointer. */ doadjust = 0; for (head = tail = NULL, nitems = 0; (dp = readdir(dirp)) != NULL;) { if (!ISSET(FTS_SEEDOT) && ISDOT(dp->d_name)) continue; #if defined(HAVE_STRUCT_DIRENT_D_NAMLEN) dnamlen = dp->d_namlen; #else dnamlen = strlen(dp->d_name); #endif if ((p = fts_alloc(sp, dp->d_name, dnamlen)) == NULL) goto mem1; if (dnamlen >= maxlen) { /* include space for NUL */ oldaddr = sp->fts_path; if (fts_palloc(sp, dnamlen + len + 1)) { /* * No more memory for path or structures. Save * errno, free up the current structure and the * structures already allocated. */ mem1: saved_errno = errno; if (p) fts_free(p); fts_lfree(head); (void)closedir(dirp); errno = saved_errno; cur->fts_info = FTS_ERR; SET(FTS_STOP); return (NULL); } /* Did realloc() change the pointer? */ if (oldaddr != sp->fts_path) { doadjust = 1; if (ISSET(FTS_NOCHDIR)) cp = sp->fts_path + len; } maxlen = sp->fts_pathlen - len; } #if defined(__FTS_COMPAT_LENGTH) if (len + dnamlen >= USHRT_MAX) { /* * In an FTSENT, fts_pathlen is an unsigned short * so it is possible to wraparound here. * If we do, free up the current structure and the * structures already allocated, then error out * with ENAMETOOLONG. */ fts_free(p); fts_lfree(head); (void)closedir(dirp); cur->fts_info = FTS_ERR; SET(FTS_STOP); errno = ENAMETOOLONG; return (NULL); } #endif p->fts_level = level; p->fts_pathlen = len + dnamlen; p->fts_parent = sp->fts_cur; #ifdef FTS_WHITEOUT if (dp->d_type == DT_WHT) p->fts_flags |= FTS_ISW; #endif if (cderrno) { if (nlinks) { p->fts_info = FTS_NS; p->fts_errno = cderrno; } else p->fts_info = FTS_NSOK; p->fts_accpath = cur->fts_accpath; } else if (nlinks == 0 #ifdef DT_DIR || (nostat && dp->d_type != DT_DIR && dp->d_type != DT_UNKNOWN) #endif ) { p->fts_accpath = ISSET(FTS_NOCHDIR) ? p->fts_path : p->fts_name; p->fts_info = FTS_NSOK; } else { /* Build a file name for fts_stat to stat. */ if (ISSET(FTS_NOCHDIR)) { p->fts_accpath = p->fts_path; memmove(cp, p->fts_name, (size_t)(p->fts_namelen + 1)); } else p->fts_accpath = p->fts_name; /* Stat it. */ p->fts_info = fts_stat(sp, p, 0); /* Decrement link count if applicable. */ if (nlinks > 0 && (p->fts_info == FTS_D || p->fts_info == FTS_DC || p->fts_info == FTS_DOT)) --nlinks; } /* We walk in directory order so "ls -f" doesn't get upset. */ p->fts_link = NULL; if (head == NULL) head = tail = p; else { tail->fts_link = p; tail = p; } ++nitems; } (void)closedir(dirp); /* * If had to realloc the path, adjust the addresses for the rest * of the tree. */ if (doadjust) fts_padjust(sp, head); /* * If not changing directories, reset the path back to original * state. */ if (ISSET(FTS_NOCHDIR)) { if (len == sp->fts_pathlen || nitems == 0) --cp; *cp = '\0'; } /* * If descended after called from fts_children or after called from * fts_read and nothing found, get back. At the root level we use * the saved fd; if one of fts_open()'s arguments is a relative path * to an empty directory, we wind up here with no other way back. If * can't get back, we're done. */ if (descend && (type == BCHILD || !nitems) && (cur->fts_level == FTS_ROOTLEVEL ? FCHDIR(sp, sp->fts_rfd) : fts_safe_changedir(sp, cur->fts_parent, -1, ".."))) { cur->fts_info = FTS_ERR; SET(FTS_STOP); return (NULL); } /* If didn't find anything, return NULL. */ if (!nitems) { if (type == BREAD) cur->fts_info = FTS_DP; return (NULL); } /* Sort the entries. */ if (sp->fts_compar && nitems > 1) head = fts_sort(sp, head, nitems); return (head); } static unsigned short fts_stat(FTS *sp, FTSENT *p, int follow) { FTSENT *t; dev_t dev; __fts_ino_t ino; __fts_stat_t *sbp, sb; int saved_errno; /* If user needs stat info, stat buffer already allocated. */ sbp = ISSET(FTS_NOSTAT) ? &sb : p->fts_statp; #ifdef FTS_WHITEOUT /* check for whiteout */ if (p->fts_flags & FTS_ISW) { if (sbp != &sb) { memset(sbp, '\0', sizeof (*sbp)); sbp->st_mode = S_IFWHT; } return (FTS_W); } #endif /* * If doing a logical walk, or application requested FTS_FOLLOW, do * a stat(2). If that fails, check for a non-existent symlink. If * fail, set the errno from the stat call. */ if (ISSET(FTS_LOGICAL) || follow) { if (stat(p->fts_accpath, sbp)) { saved_errno = errno; if (!lstat(p->fts_accpath, sbp)) { errno = 0; return (FTS_SLNONE); } p->fts_errno = saved_errno; goto err; } } else if (lstat(p->fts_accpath, sbp)) { p->fts_errno = errno; err: memset(sbp, 0, sizeof(*sbp)); return (FTS_NS); } if (S_ISDIR(sbp->st_mode)) { /* * Set the device/inode. Used to find cycles and check for * crossing mount points. Also remember the link count, used * in fts_build to limit the number of stat calls. It is * understood that these fields are only referenced if fts_info * is set to FTS_D. */ dev = p->fts_dev = sbp->st_dev; ino = p->fts_ino = sbp->st_ino; p->fts_nlink = sbp->st_nlink; if (ISDOT(p->fts_name)) return (FTS_DOT); /* * Cycle detection is done by brute force when the directory * is first encountered. If the tree gets deep enough or the * number of symbolic links to directories is high enough, * something faster might be worthwhile. */ for (t = p->fts_parent; t->fts_level >= FTS_ROOTLEVEL; t = t->fts_parent) if (ino == t->fts_ino && dev == t->fts_dev) { p->fts_cycle = t; return (FTS_DC); } return (FTS_D); } if (S_ISLNK(sbp->st_mode)) return (FTS_SL); if (S_ISREG(sbp->st_mode)) return (FTS_F); return (FTS_DEFAULT); } static FTSENT * fts_sort(FTS *sp, FTSENT *head, size_t nitems) { FTSENT **ap, *p; /* * Construct an array of pointers to the structures and call qsort(3). * Reassemble the array in the order returned by qsort. If unable to * sort for memory reasons, return the directory entries in their * current order. Allocate enough space for the current needs plus * 40 so don't realloc one entry at a time. */ if (nitems > sp->fts_nitems) { FTSENT **new; new = realloc(sp->fts_array, sizeof(FTSENT *) * (nitems + 40)); if (new == 0) return (head); sp->fts_array = new; sp->fts_nitems = nitems + 40; } for (ap = sp->fts_array, p = head; p; p = p->fts_link) *ap++ = p; qsort((void *)sp->fts_array, nitems, sizeof(FTSENT *), (int (*)(const void *, const void *))sp->fts_compar); for (head = *(ap = sp->fts_array); --nitems; ++ap) ap[0]->fts_link = ap[1]; ap[0]->fts_link = NULL; return (head); } static FTSENT * fts_alloc(FTS *sp, const char *name, size_t namelen) { FTSENT *p; #if defined(FTS_ALLOC_ALIGNED) size_t len; #endif #if defined(FTS_ALLOC_ALIGNED) /* * The file name is a variable length array and no stat structure is * necessary if the user has set the nostat bit. Allocate the FTSENT * structure, the file name and the stat structure in one chunk, but * be careful that the stat structure is reasonably aligned. Since the * fts_name field is declared to be of size 1, the fts_name pointer is * namelen + 2 before the first possible address of the stat structure. */ len = sizeof(FTSENT) + namelen; if (!ISSET(FTS_NOSTAT)) len += sizeof(*(p->fts_statp)) + ALIGNBYTES; if ((p = malloc(len)) == NULL) return (NULL); if (!ISSET(FTS_NOSTAT)) p->fts_statp = (__fts_stat_t *)ALIGN( (unsigned long)(p->fts_name + namelen + 2)); #else if ((p = malloc(sizeof(FTSENT) + namelen)) == NULL) return (NULL); if (!ISSET(FTS_NOSTAT)) if ((p->fts_statp = malloc(sizeof(*(p->fts_statp)))) == NULL) { free(p); return (NULL); } #endif /* Copy the name plus the trailing NULL. */ memmove(p->fts_name, name, namelen + 1); p->fts_namelen = namelen; p->fts_path = sp->fts_path; p->fts_errno = 0; p->fts_flags = 0; p->fts_instr = FTS_NOINSTR; p->fts_number = 0; p->fts_pointer = NULL; return (p); } static void fts_free(FTSENT *p) { #if !defined(FTS_ALLOC_ALIGNED) if (p->fts_statp) free(p->fts_statp); #endif free(p); } static void fts_lfree(FTSENT *head) { FTSENT *p; /* XXX: head may be NULL ? */ /* Free a linked list of structures. */ while ((p = head) != NULL) { head = head->fts_link; fts_free(p); } } static size_t fts_pow2(size_t x) { x--; x |= x>>1; x |= x>>2; x |= x>>4; x |= x>>8; x |= x>>16; #if LONG_BIT > 32 x |= x>>32; #endif #if LONG_BIT > 64 x |= x>>64; #endif x++; return (x); } /* * Allow essentially unlimited paths; find, rm, ls should all work on any tree. * Most systems will allow creation of paths much longer than MAXPATHLEN, even * though the kernel won't resolve them. Round up the new size to a power of 2, * so we don't realloc the path 2 bytes at a time. */ static int fts_palloc(FTS *sp, size_t size) { char *new; #ifdef __FTS_COMPAT_LENGTH /* Protect against fts_pathlen overflow. */ if (size > USHRT_MAX + 1) { errno = ENAMETOOLONG; return (1); } #endif size = fts_pow2(size); new = realloc(sp->fts_path, size); if (new == 0) return (1); sp->fts_path = new; sp->fts_pathlen = size; return (0); } /* * When the path is realloc'd, have to fix all of the pointers in structures * already returned. */ static void fts_padjust(FTS *sp, FTSENT *head) { FTSENT *p; char *addr; #define ADJUST(p) do { \ if ((p)->fts_accpath != (p)->fts_name) \ (p)->fts_accpath = \ addr + ((p)->fts_accpath - (p)->fts_path); \ (p)->fts_path = addr; \ } while (/*CONSTCOND*/0) addr = sp->fts_path; /* Adjust the current set of children. */ for (p = sp->fts_child; p; p = p->fts_link) ADJUST(p); /* Adjust the rest of the tree, including the current level. */ for (p = head; p->fts_level >= FTS_ROOTLEVEL;) { ADJUST(p); p = p->fts_link ? p->fts_link : p->fts_parent; } } static size_t fts_maxarglen(char * const *argv) { size_t len, max; for (max = 0; *argv; ++argv) if ((len = strlen(*argv)) > max) max = len; return (max + 1); } /* * Change to dir specified by fd or p->fts_accpath without getting * tricked by someone changing the world out from underneath us. * Assumes p->fts_dev and p->fts_ino are filled in. */ static int fts_safe_changedir(const FTS *sp, const FTSENT *p, int fd, const char *path) { int oldfd = fd, ret = -1; __fts_stat_t sb; if (ISSET(FTS_NOCHDIR)) return 0; if (oldfd < 0 && (fd = open(path, O_RDONLY)) == -1) return -1; if (fstat(fd, &sb) == -1) goto bail; if (sb.st_ino != p->fts_ino || sb.st_dev != p->fts_dev) { errno = ENOENT; goto bail; } ret = fchdir(fd); bail: if (oldfd < 0) { int save_errno = errno; (void)close(fd); errno = save_errno; } return ret; } amavisd-milter-1.5.0/compat/write_sock.c000644 001751 001751 00000005525 10515237167 020207 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: write_sock.c,v 1.2 2006/10/17 20:35:03 reho Exp $ */ #include "compat.h" #include /* ** WRITE_SOCK - write N bytes to socket */ ssize_t write_sock(int sd, void *buf, size_t nbytes, long timeout) { int ret; char *b = (char *) buf; fd_set wfds; size_t n = 0; ssize_t m = 0; struct timeval tv; /* Set timeout */ tv.tv_sec = timeout; tv.tv_usec = 0; /* Check socket descriptor */ if (sd >= (int) FD_SETSIZE) { /* sd is larger than FD_SETSIZE */ errno = EBADF; return -1; } /* Write N bytes to socket */ while (n < nbytes) { FD_ZERO(&wfds); FD_SET((unsigned int)sd, &wfds); /* Wait for socket */ ret = select(sd + 1, NULL, &wfds, NULL, &tv); if (ret == -1) { if (errno == EINTR) { /* A signal was delivered, continue */ continue; } else { /* An error occured */ return -1; } } else if (ret == 0) { /* Timeout */ errno = ETIMEDOUT; return -1; } /* Write data to socket */ m = write(sd, b, nbytes - n); if (m == -1) { if (errno == EINTR) { /* A signal was delivered, continue */ continue; } else { /* An error occured */ return -1; } } else { /* Write data */ n += m; b += m; } } /* Return number of bytes */ return nbytes; } amavisd-milter-1.5.0/compat/strlcpy.c000644 001751 001751 00000003545 10243444537 017535 0ustar00rehoreho000000 000000 /* $Id: strlcpy.c,v 1.2 2005/05/20 20:32:31 reho Exp $ */ /* OPENBSD ORIGINAL: lib/libc/string/strlcpy.c */ /* $OpenBSD: strlcpy.c,v 1.8 2003/06/17 21:56:24 millert Exp $ */ /* * Copyright (c) 1998 Todd C. Miller * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include "compat.h" #if defined(LIBC_SCCS) && !defined(lint) static char *rcsid = "$OpenBSD: strlcpy.c,v 1.8 2003/06/17 21:56:24 millert Exp $"; #endif /* LIBC_SCCS and not lint */ #include #include /* * Copy src to string dst of size siz. At most siz-1 characters * will be copied. Always NUL terminates (unless siz == 0). * Returns strlen(src); if retval >= siz, truncation occurred. */ size_t strlcpy(char *dst, const char *src, size_t siz) { register char *d = dst; register const char *s = src; register size_t n = siz; /* Copy as many bytes as will fit */ if (n != 0 && --n != 0) { do { if ((*d++ = *s++) == 0) break; } while (--n != 0); } /* Not enough room in dst, add NUL and traverse rest of src */ if (n == 0) { if (siz != 0) *d = '\0'; /* NUL-terminate dst */ while (*s++) ; } return(s - src - 1); /* count does not include NUL */ } amavisd-milter-1.5.0/compat/Makefile.am000644 001751 001751 00000000655 10365771527 017733 0ustar00rehoreho000000 000000 # $Id: Makefile.am,v 1.3 2006/01/25 21:53:27 reho Exp $ # Distribution files EXTRA_DIST= \ Makefile.am \ Makefile.in # Header files noinst_HEADERS= \ compat.h \ fts_compat.h # Libraries noinst_LIBRARIES= \ libcompat.a # libcompat compiling parameters libcompat_a_SOURCES= \ read_sock.c \ write_sock.c libcompat_a_LIBADD= \ @LIBOBJS@ libcompat_a_DEPENDENCIES= \ @LIBOBJS@ maintainer-clean-local: -rm -f Makefile.in amavisd-milter-1.5.0/compat/compat.h000644 001751 001751 00000007327 11101717740 017320 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: compat.h,v 1.10 2008/10/28 23:27:28 reho Exp $ */ #ifndef _AMAVISD_COMPAT_H #define _AMAVISD_COMPAT_H #ifdef HAVE_CONFIG_H # include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if HAVE_STDBOOL_H # include #else # if ! HAVE__BOOL # ifdef __cplusplus typedef bool _Bool; # else typedef unsigned char _Bool; # endif # endif # define bool _Bool # define false 0 # define true 1 # define __bool_true_false_are_defined 1 #endif #if HAVE_DIRENT_H # include #else # define dirent direct # if HAVE_SYS_NDIR_H # include # endif # if HAVE_SYS_DIR_H # include # endif # if HAVE_NDIR_H # include # endif #endif #if !defined(HAVE_DIRFD) && !defined(HAVE_DIRFD_AS_MACRO) # if defined(HAVE_DIR_D_FD) # define dirfd(_d) ((_d)->d_fd) # elif defined(HAVE_DIR_DD_FD) # define dirfd(_d) ((_d)->dd_fd) # elif defined(HAVE_DIR___DD_FD) # define dirfd(_d) ((_d)->__dd_fd) # else # error cannot figure out how to turn a DIR * into a fd # endif #endif #if ! defined(MIN) # define MIN(a, b) ((a) < (b) ? (a) : (b)) #endif #if ! defined(MAX) # define MAX(a, b) ((a) < (b) ? (b) : (a)) #endif #if ! HAVE_DAEMON # ifndef _PATH_DEVNULL # define _PATH_DEVNULL "/dev/null" # endif /* Run detached from the controlling terminal */ extern int daemon(int, int); #endif #if HAVE_FTS_H # include #else # include "fts_compat.h" #endif #if TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif #if ! HAVE_MKDTEMP /* Make temporary directory */ extern char *mkdtemp(char *); #endif #if ! HAVE_STRLCPY /* String copy */ extern size_t strlcpy(char *, const char *, size_t); #endif /* Secure socket handling */ extern ssize_t read_sock(int, void *, size_t, long); extern ssize_t write_sock(int, void *, size_t, long); #endif /* _AMAVISD_COMPAT_H */ amavisd-milter-1.5.0/compat/fts_compat.h000644 001751 001751 00000013030 11032464235 020161 0ustar00rehoreho000000 000000 /* $Id: fts_compat.h,v 1.2 2008/07/01 17:25:49 reho Exp $ */ /* TNFTPD ORIGINAL: libnetbsd/ftpfts.h */ /* $NetBSD: ftpfts.h,v 1.5 2008/03/09 20:54:13 lukem Exp $ */ /* from NetBSD: fts.h,v 1.17 2008/03/07 10:38:31 lukem Exp */ /* * Copyright (c) 1989, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)fts.h 8.3 (Berkeley) 8/14/94 */ #ifndef _FTS_H_ #define _FTS_H_ #ifndef __fts_stat_t #define __fts_stat_t struct stat #endif #ifndef __fts_nlink_t #define __fts_nlink_t nlink_t #endif #ifndef __fts_ino_t #define __fts_ino_t ino_t #endif #ifndef __fts_length_t #define __fts_length_t unsigned int #endif #ifndef __fts_number_t #define __fts_number_t int64_t #endif typedef struct { struct _ftsent *fts_cur; /* current node */ struct _ftsent *fts_child; /* linked list of children */ struct _ftsent **fts_array; /* sort array */ dev_t fts_dev; /* starting device # */ char *fts_path; /* path for this descent */ int fts_rfd; /* fd for root */ unsigned int fts_pathlen; /* sizeof(path) */ unsigned int fts_nitems; /* elements in the sort array */ int (*fts_compar) /* compare function */ (const struct _ftsent **, const struct _ftsent **); #define FTS_COMFOLLOW 0x001 /* follow command line symlinks */ #define FTS_LOGICAL 0x002 /* logical walk */ #define FTS_NOCHDIR 0x004 /* don't change directories */ #define FTS_NOSTAT 0x008 /* don't get stat info */ #define FTS_PHYSICAL 0x010 /* physical walk */ #define FTS_SEEDOT 0x020 /* return dot and dot-dot */ #define FTS_XDEV 0x040 /* don't cross devices */ #define FTS_WHITEOUT 0x080 /* return whiteout information */ #define FTS_OPTIONMASK 0x0ff /* valid user option mask */ #define FTS_NAMEONLY 0x100 /* (private) child names only */ #define FTS_STOP 0x200 /* (private) unrecoverable error */ int fts_options; /* fts_open options, global flags */ } FTS; typedef struct _ftsent { struct _ftsent *fts_cycle; /* cycle node */ struct _ftsent *fts_parent; /* parent directory */ struct _ftsent *fts_link; /* next file in directory */ __fts_number_t fts_number; /* local numeric value */ void *fts_pointer; /* local address value */ char *fts_accpath; /* access path */ char *fts_path; /* root path */ int fts_errno; /* errno for this node */ int fts_symfd; /* fd for symlink */ __fts_length_t fts_pathlen; /* strlen(fts_path) */ __fts_length_t fts_namelen; /* strlen(fts_name) */ __fts_ino_t fts_ino; /* inode */ dev_t fts_dev; /* device */ __fts_nlink_t fts_nlink; /* link count */ #define FTS_ROOTPARENTLEVEL -1 #define FTS_ROOTLEVEL 0 short fts_level; /* depth (-1 to N) */ #define FTS_D 1 /* preorder directory */ #define FTS_DC 2 /* directory that causes cycles */ #define FTS_DEFAULT 3 /* none of the above */ #define FTS_DNR 4 /* unreadable directory */ #define FTS_DOT 5 /* dot or dot-dot */ #define FTS_DP 6 /* postorder directory */ #define FTS_ERR 7 /* error; errno is set */ #define FTS_F 8 /* regular file */ #define FTS_INIT 9 /* initialized only */ #define FTS_NS 10 /* stat(2) failed */ #define FTS_NSOK 11 /* no stat(2) requested */ #define FTS_SL 12 /* symbolic link */ #define FTS_SLNONE 13 /* symbolic link without target */ #define FTS_W 14 /* whiteout object */ unsigned short fts_info; /* user flags for FTSENT structure */ #define FTS_DONTCHDIR 0x01 /* don't chdir .. to the parent */ #define FTS_SYMFOLLOW 0x02 /* followed a symlink to get here */ #define FTS_ISW 0x04 /* this is a whiteout object */ unsigned short fts_flags; /* private flags for FTSENT structure */ #define FTS_AGAIN 1 /* read node again */ #define FTS_FOLLOW 2 /* follow symbolic link */ #define FTS_NOINSTR 3 /* no instructions */ #define FTS_SKIP 4 /* discard node */ unsigned short fts_instr; /* fts_set() instructions */ __fts_stat_t *fts_statp; /* stat(2) information */ char fts_name[1]; /* file name */ } FTSENT; FTSENT *fts_children(FTS *, int); int fts_close(FTS *); FTS *fts_open(char * const *, int, int (*)(const FTSENT **, const FTSENT **)); FTSENT *fts_read(FTS *); int fts_set(FTS *, FTSENT *, int); #endif /* !_FTS_H_ */ amavisd-milter-1.5.0/compat/read_sock.c000644 001751 001751 00000006073 10515237167 017767 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: read_sock.c,v 1.3 2006/10/17 20:35:03 reho Exp $ */ #include "compat.h" #include /* ** READ_SOCK - read N bytes from socket */ ssize_t read_sock(int sd, void *buf, size_t nbytes, long timeout) { int ret; char *b = (char *) buf; fd_set rfds, efds; size_t n = 0; ssize_t m = 0; struct timeval tv; /* Set timeout */ tv.tv_sec = timeout; tv.tv_usec = 0; /* Check socket descriptor */ if (sd >= (int) FD_SETSIZE) { /* sd is larger than FD_SETSIZE */ errno = EBADF; return -1; } /* Read N bytes from socket */ while (n < nbytes) { FD_ZERO(&rfds); FD_ZERO(&efds); FD_SET((unsigned int)sd, &rfds); FD_SET((unsigned int)sd, &efds); /* Wait for socket */ ret = select(sd + 1, &rfds, NULL, &efds, &tv); if (ret == -1) { if (errno == EINTR) { /* A signal was delivered, continue */ continue; } else { /* An error occured */ return -1; } } else if (ret == 0) { /* Timeout */ errno = ETIMEDOUT; return -1; } if (FD_ISSET(sd, &efds)) { /* Out-of-band data received on socket */ errno = EIO; return -1; } /* Read data from socket */ m = read(sd, b, nbytes - n); if (m == -1) { if (errno == EINTR) { /* A signal was delivered, continue */ continue; } else { /* An error occured */ return -1; } } else if (m == 0) { /* End of file */ nbytes = n; } else { /* Read data */ n += m; b += m; } } /* Return number of bytes */ return nbytes; } amavisd-milter-1.5.0/compat/mkdtemp.c000644 001751 001751 00000007722 10244167356 017501 0ustar00rehoreho000000 000000 /* $Id: mkdtemp.c,v 1.3 2005/05/22 20:43:26 reho Exp $ */ /* OPENBSD ORIGINAL: lib/libc/stdio/mktemp.c */ /* * Copyright (c) 1987, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char rcsid[] = "$OpenBSD: mktemp.c,v 1.18 2004/09/28 18:12:44 otto Exp $"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include #include static int _gettemp(char *, int *, int, int); char * mkdtemp(char *path) { return(_gettemp(path, (int *)NULL, 1, 0) ? path : (char *)NULL); } static int _gettemp(char *path, int *doopen, int domkdir, int slen) { char *start, *trv, *suffp; struct stat sbuf; int rval; pid_t pid; if (doopen && domkdir) { errno = EINVAL; return(0); } for (trv = path; *trv; ++trv) ; trv -= slen; suffp = trv; --trv; if (trv < path) { errno = EINVAL; return (0); } pid = getpid(); while (trv >= path && *trv == 'X' && pid != 0) { *trv-- = (pid % 10) + '0'; pid /= 10; } while (trv >= path && *trv == 'X') { char c; #ifdef HAVE_ARC4RANDOM pid = (arc4random() & 0xffff) % (26+26); #else pid = (random() & 0xffff) % (26+26); #endif if (pid < 26) c = pid + 'A'; else c = (pid - 26) + 'a'; *trv-- = c; } start = trv + 1; /* * check the target directory; if you have six X's and it * doesn't exist this runs for a *very* long time. */ if (doopen || domkdir) { for (;; --trv) { if (trv <= path) break; if (*trv == '/') { *trv = '\0'; rval = stat(path, &sbuf); *trv = '/'; if (rval != 0) return(0); if (!S_ISDIR(sbuf.st_mode)) { errno = ENOTDIR; return(0); } break; } } } for (;;) { if (doopen) { if ((*doopen = open(path, O_CREAT|O_EXCL|O_RDWR, 0600)) >= 0) return(1); if (errno != EEXIST) return(0); } else if (domkdir) { if (mkdir(path, 0700) == 0) return(1); if (errno != EEXIST) return(0); } else if (lstat(path, &sbuf)) return(errno == ENOENT ? 1 : 0); /* tricky little algorithm for backward compatibility */ for (trv = start;;) { if (!*trv) return (0); if (*trv == 'Z') { if (trv == suffp) return (0); *trv++ = 'a'; } else { if (isdigit(*trv)) *trv = 'a'; else if (*trv == 'z') /* inc from z to A */ *trv = 'A'; else { if (trv == suffp) return (0); ++*trv; } break; } } } /*NOTREACHED*/ } amavisd-milter-1.5.0/compat/daemon.c000644 001751 001751 00000004572 10444453443 017300 0ustar00rehoreho000000 000000 /* $Id: daemon.c,v 1.1 2006/06/16 07:00:51 reho Exp $ */ /* OPENBSD ORIGINAL: lib/libc/gen/daemon.c */ /* $OpenBSD: daemon.c,v 1.6 2005/08/08 08:05:33 espie Exp $ */ /*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "compat.h" int daemon(int nochdir, int noclose) { int fd; switch (fork()) { case -1: return (-1); case 0: #ifdef HAVE_CYGWIN register_9x_service(); #endif break; default: #ifdef HAVE_CYGWIN /* * This sleep avoids a race condition which kills the * child process if parent is started by a NT/W2K service. */ sleep(1); #endif _exit(0); } if (setsid() == -1) return (-1); if (!nochdir) (void)chdir("/"); if (!noclose && (fd = open(_PATH_DEVNULL, O_RDWR, 0)) != -1) { (void)dup2(fd, STDIN_FILENO); (void)dup2(fd, STDOUT_FILENO); (void)dup2(fd, STDERR_FILENO); if (fd > 2) (void)close (fd); } return (0); } amavisd-milter-1.5.0/compat/Makefile.in000644 001751 001751 00000032305 11367260555 017736 0ustar00rehoreho000000 000000 # Makefile.in generated by automake 1.10.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # $Id: Makefile.am,v 1.3 2006/01/25 21:53:27 reho Exp $ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = compat DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in daemon.c fts_open.c mkdtemp.c strlcpy.c ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/aclocal/acinclude.m4 \ $(top_srcdir)/aclocal/acx_pthread.m4 \ $(top_srcdir)/aclocal/ax_path_milter.m4 \ $(top_srcdir)/aclocal/dirfd.m4 $(top_srcdir)/aclocal/eilseq.m4 \ $(top_srcdir)/aclocal/eoverflow.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = LIBRARIES = $(noinst_LIBRARIES) AR = ar ARFLAGS = cru libcompat_a_AR = $(AR) $(ARFLAGS) am_libcompat_a_OBJECTS = read_sock.$(OBJEXT) write_sock.$(OBJEXT) libcompat_a_OBJECTS = $(am_libcompat_a_OBJECTS) DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/aclocal/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libcompat_a_SOURCES) DIST_SOURCES = $(libcompat_a_SOURCES) HEADERS = $(noinst_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EILSEQ = @EILSEQ@ EOVERFLOW = @EOVERFLOW@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MILTER_CPPFLAGS = @MILTER_CPPFLAGS@ MILTER_LDFLAGS = @MILTER_LDFLAGS@ MILTER_LIBS = @MILTER_LIBS@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PTHREAD_CC = @PTHREAD_CC@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_LIBS = @PTHREAD_LIBS@ RANLIB = @RANLIB@ SENDMAIL_BASE_DIR = @SENDMAIL_BASE_DIR@ SENDMAIL_OBJ_DIR = @SENDMAIL_OBJ_DIR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ acx_pthread_config = @acx_pthread_config@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # Distribution files EXTRA_DIST = \ Makefile.am \ Makefile.in # Header files noinst_HEADERS = \ compat.h \ fts_compat.h # Libraries noinst_LIBRARIES = \ libcompat.a # libcompat compiling parameters libcompat_a_SOURCES = \ read_sock.c \ write_sock.c libcompat_a_LIBADD = \ @LIBOBJS@ libcompat_a_DEPENDENCIES = \ @LIBOBJS@ all: all-am .SUFFIXES: .SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign compat/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign compat/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh clean-noinstLIBRARIES: -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) libcompat.a: $(libcompat_a_OBJECTS) $(libcompat_a_DEPENDENCIES) -rm -f libcompat.a $(libcompat_a_AR) libcompat.a $(libcompat_a_OBJECTS) $(libcompat_a_LIBADD) $(RANLIB) libcompat.a mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/daemon.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/fts_open.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/mkdtemp.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strlcpy.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read_sock.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/write_sock.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(LIBRARIES) $(HEADERS) installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am distclean: distclean-am -rm -rf $(DEPDIR) ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-exec-am: install-html: install-html-am install-info: install-info-am install-man: install-pdf: install-pdf-am install-ps: install-ps-am installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf $(DEPDIR) ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-noinstLIBRARIES ctags distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs maintainer-clean \ maintainer-clean-generic maintainer-clean-local mostlyclean \ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ tags uninstall uninstall-am maintainer-clean-local: -rm -f Makefile.in # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: amavisd-milter-1.5.0/amavisd-milter/Makefile.am000644 001751 001751 00000001010 10511016677 021337 0ustar00rehoreho000000 000000 # $Id: Makefile.am,v 1.4 2006/10/04 20:46:55 reho Exp $ # Distribution files EXTRA_DIST= \ amavisd-milter.8 \ Makefile.am \ Makefile.in # Header files noinst_HEADERS= \ amavisd-milter.h # Manual pages man_MANS= \ amavisd-milter.8 # Binaries sbin_PROGRAMS= \ amavisd-milter # amavisd-milter compiling parameters amavisd_milter_SOURCES= \ amavisd.c \ log.c \ main.c \ mlfi.c amavisd_milter_LDADD= \ ../compat/libcompat.a amavisd_milter_CPPFLAGS= \ -I../compat maintainer-clean-local: -rm -f Makefile.in amavisd-milter-1.5.0/amavisd-milter/mlfi.c000644 001751 001751 00000130541 11367245747 020426 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: mlfi.c,v 1.59 2010/05/02 09:54:47 reho Exp $ */ #include "amavisd-milter.h" #include #include #include /* ** SMFILTER - Milter description */ struct smfiDesc smfilter = { PACKAGE, /* filter name */ SMFI_VERSION, /* version code -- do not change */ SMFIF_ADDHDRS | SMFIF_CHGHDRS | SMFIF_ADDRCPT | SMFIF_DELRCPT, /* filter actions */ mlfi_connect, /* connection info filter */ mlfi_helo, /* SMTP HELO command filter */ mlfi_envfrom, /* envelope sender filter */ mlfi_envrcpt, /* envelope recipient filter */ mlfi_header, /* header filter */ mlfi_eoh, /* end of header */ mlfi_body, /* body block filter */ mlfi_eom, /* end of message */ mlfi_abort, /* message aborted */ mlfi_close, /* connection cleanup */ NULL, /* any unrecognized or unimplemented */ /* command filter */ NULL, /* SMTP DATA command filter */ NULL /* negotiation callback */ }; /* ** Dates and months abbreviations */ static const char *days[] = { "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" }; static const char *months[] = { "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" }; /* ** SNPRINTFCAT - Append formatted string */ static size_t snprintfcat(size_t length, char *buf, size_t size, const char *fmt, ...) { va_list ap; va_start(ap, fmt); if ((length += vsnprintf(buf + length, size - length, fmt, ap)) >= size) { length = size -1; } va_end(ap); return length; } /* ** MLFI_CLEANUP_MESSAGE - Cleanup message context ** ** mlfi_cleanup_message() close message file if open, unlink working directory ** and release message context */ static void mlfi_cleanup_message(struct mlfiCtx *mlfi) { FTS *fts; FTSENT *ftsent; char *wrkdir[] = { NULL, NULL }; struct mlfiAddress *rcpt; logqidmsg(mlfi, LOG_DEBUG, "CLEANUP MESSAGE CONTEXT"); /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_DEBUG, "mlfi_cleanup_message: context is not set"); return; } /* Close amavisd connection */ amavisd_close(mlfi); /* Close the message file */ if (mlfi->mlfi_fp != NULL) { if (fclose(mlfi->mlfi_fp) != 0 && errno != EBADF) { logqidmsg(mlfi, LOG_WARNING, "could not close message file %s: %s", mlfi->mlfi_fname, strerror(errno)); } else { logqidmsg(mlfi, LOG_DEBUG, "close message file %s", mlfi->mlfi_fname); } mlfi->mlfi_fp = NULL; } /* Remove working directory */ if (mlfi->mlfi_wrkdir[0] != '\0') { wrkdir[0] = mlfi->mlfi_wrkdir; fts = fts_open(wrkdir, FTS_PHYSICAL | FTS_NOCHDIR, NULL); if (fts == NULL) { logqidmsg(mlfi, LOG_WARNING, "could not open file hierarchy %s: %s", mlfi->mlfi_wrkdir, strerror(errno)); } else { while ((ftsent = fts_read(fts)) != NULL) { switch (ftsent->fts_info) { case FTS_ERR: /* * This is an error return, and the fts_errno * field will be set to indicate what caused the * error. */ logqidmsg(mlfi, LOG_WARNING, "could not traverse file hierarchy %s: %s", ftsent->fts_path, strerror(ftsent->fts_errno)); break; case FTS_DNR: /* * Assume that since fts_read() couldn't read the * directory, it can't be removed. */ if (ftsent->fts_errno != ENOENT) { logqidmsg(mlfi, LOG_WARNING, "could not remove directory %s: %s", ftsent->fts_path, strerror(ftsent->fts_errno)); } break; case FTS_NS: /* * Assume that since fts_read() couldn't stat the * file, it can't be unlinked. */ logqidmsg(mlfi, LOG_WARNING, "could not unlink file %s: %s", ftsent->fts_path, strerror(ftsent->fts_errno)); break; case FTS_D: /* * Skip pre-order directory. */ break; case FTS_DP: /* * Remove post-order directory. */ if (rmdir(ftsent->fts_accpath) != 0 && errno != ENOENT) { logqidmsg(mlfi, LOG_WARNING, "could not remove directory %s: %s", ftsent->fts_path, strerror(ftsent->fts_errno)); } else { logqidmsg(mlfi, LOG_DEBUG, "remove directory %s", ftsent->fts_path); } break; default: /* * A regular file or symbolic link. */ if (unlink(ftsent->fts_accpath) != 0 && errno != ENOENT) { logqidmsg(mlfi, LOG_WARNING, "could not unlink file %s: %s", ftsent->fts_path, strerror(ftsent->fts_errno)); } else { logqidmsg(mlfi, LOG_DEBUG, "unlink file %s", ftsent->fts_path); } } } if (fts_close(fts) != 0) { logqidmsg(mlfi, LOG_WARNING, "could not close file hirerachy %s: %s", mlfi->mlfi_wrkdir, strerror(errno)); } } mlfi->mlfi_wrkdir[0] = '\0'; } /* Reset CRLF detection flag */ mlfi->mlfi_cr_flag = 0; /* Free memory */ free(mlfi->mlfi_prev_qid); mlfi->mlfi_prev_qid = mlfi->mlfi_qid; mlfi->mlfi_qid = NULL; free(mlfi->mlfi_from); mlfi->mlfi_from = NULL; free(mlfi->mlfi_policy_bank); mlfi->mlfi_policy_bank = NULL; while(mlfi->mlfi_rcpt != NULL) { rcpt = mlfi->mlfi_rcpt; mlfi->mlfi_rcpt = rcpt->q_next; free(rcpt); } } /* ** MLFI_CLEANUP - Cleanup connection context ** ** mlfi_cleanup() cleanup message context and relese connection context */ static void mlfi_cleanup(struct mlfiCtx *mlfi) { /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_DEBUG, "CLEANUP CONNECTION CONTEXT"); logqidmsg(mlfi, LOG_DEBUG, "mlfi_cleanup: context is not set"); return; } /* Cleanup the message context */ mlfi_cleanup_message(mlfi); logqidmsg(mlfi, LOG_DEBUG, "CLEANUP CONNECTION CONTEXT"); /* Cleanup the connection context */ free(mlfi->mlfi_hostname); free(mlfi->mlfi_client_addr); free(mlfi->mlfi_client_host); free(mlfi->mlfi_helo); free(mlfi->mlfi_protocol); free(mlfi->mlfi_amabuf); free(mlfi->mlfi_prev_qid); /* Free context */ free(mlfi); } /* ** MLFI_SETREPLY_TEMPFAIL - Set SMFIS_TEMPFAIL reply */ static void mlfi_setreply_tempfail(SMFICTX *ctx) { const char *rcode = "451"; const char *xcode = "4.6.0"; const char *reason = "Content scanner malfunction"; struct mlfiCtx *mlfi = MLFICTX(ctx); if (smfi_setreply(ctx, rcode, xcode, reason) != MI_SUCCESS) { logqidmsg(mlfi, LOG_WARNING, "could not set SMTP reply: %s %s %s", rcode, xcode, reason); } else { logqidmsg(mlfi, LOG_DEBUG, "set reply %s %s %s", rcode, xcode, reason); } } /* ** MLFI_CONNECT - Handle incomming connection ** ** mlfi_connect() is called once, at the start of each SMTP connection */ sfsistat mlfi_connect(SMFICTX *ctx, char *hostname, _SOCK_ADDR * hostaddr) { struct mlfiCtx *mlfi = NULL; const void *addr; const char *prefix; int len, plen; logmsg(LOG_DEBUG, "%s: CONNECT", hostname); /* Allocate memory for private data */ mlfi = malloc(sizeof(*mlfi)); if (mlfi == NULL) { logmsg(LOG_ERR, "%s: could not allocate private data", hostname); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Initialize context */ (void) memset(mlfi, '\0', sizeof(*mlfi)); mlfi->mlfi_amasd = -1; /* Save connection informations */ if (hostname != NULL && *hostname != '\0') { if ((mlfi->mlfi_client_host = strdup(hostname)) == NULL) { logmsg(LOG_ERR, "%s: could not allocate memory", hostname); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } addr = NULL; if (hostaddr != NULL) { switch(hostaddr->sa_family) { case AF_INET: addr = &((struct sockaddr_in *)hostaddr)->sin_addr; len = INET_ADDRSTRLEN; prefix = NULL; plen = 0; /* prefix length */ break; #if HAVE_DECL_AF_INET6 && HAVE_DECL_INET6_ADDRSTRLEN && HAVE_STRUCT_SOCKADDR_IN6 case AF_INET6: addr = &((struct sockaddr_in6 *)hostaddr)->sin6_addr; len = INET6_ADDRSTRLEN; prefix = "IPv6:"; plen = 5; /* prefix length */ break; #endif default: logqidmsg(mlfi, LOG_WARNING, "unrecognized address family %d for " "host %s", (int)hostaddr->sa_family, hostname); break; } } if (addr != NULL) { if ((mlfi->mlfi_client_addr = malloc(len + plen)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } if (prefix != NULL) { (void) strlcpy(mlfi->mlfi_client_addr, prefix, len + plen); } if (inet_ntop(hostaddr->sa_family, addr, mlfi->mlfi_client_addr + plen, len) == NULL) { free(mlfi->mlfi_client_addr); mlfi->mlfi_client_addr = NULL; logqidmsg(mlfi, LOG_WARNING, "could not convert host address to " "string for host %s", hostname); } else { logqidmsg(mlfi, LOG_DEBUG, "host address: %s", mlfi->mlfi_client_addr); } } /* Allocate amavisd communication buffer */ mlfi->mlfi_amabuf_length = AMABUFCHUNK; if ((mlfi->mlfi_amabuf = malloc(mlfi->mlfi_amabuf_length)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate amavisd communication buffer"); mlfi_setreply_tempfail(ctx); mlfi_cleanup(mlfi); return SMFIS_TEMPFAIL; } /* Save the private data */ if (smfi_setpriv(ctx, mlfi) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not set milter context"); mlfi_setreply_tempfail(ctx); mlfi_cleanup(mlfi); return SMFIS_TEMPFAIL; } /* Save hostname */ if ((hostname = smfi_getsymval(ctx, "j")) != NULL) { if ((mlfi->mlfi_hostname = strdup(hostname)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_HELO - Handle the HELO/EHLO command ** ** mlfi_helo() is called whenever the client sends a HELO/EHLO command. ** It may therefore be called between zero and three times. */ sfsistat mlfi_helo(SMFICTX *ctx, char* helohost) { struct mlfiCtx *mlfi = MLFICTX(ctx); /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_ERR, "mlfi_helo: context is not set"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "HELO: %s", helohost); /* Save helo hostname */ if (helohost != NULL && *helohost != '\0') { free(mlfi->mlfi_helo); if ((mlfi->mlfi_helo = strdup(helohost)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_ENVFORM - Handle the envelope FROM command ** ** mlfi_envfrom() is called once at the beginning of each message, before ** mlfi_envrcpt() */ sfsistat mlfi_envfrom(SMFICTX *ctx, char **envfrom) { struct mlfiCtx *mlfi = MLFICTX(ctx); char buf[64]; const char *auth_type, *auth_authen, *auth_ssf; const char *date, *qid, *wrkdir; const char *protocol = NULL; size_t l; time_t t; struct tm gt, lt; int gmtoff; /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_ERR, "mlfi_envfrom: context is not set"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Save communication protocol name */ /* XXX: sendmail's macro $r is not available in mlfi_helo stage */ if (mlfi->mlfi_protocol == NULL && (protocol = smfi_getsymval(ctx, "r")) != NULL) { logqidmsg(mlfi, LOG_DEBUG, "protocol: %s", protocol); if ((mlfi->mlfi_protocol = strdup(protocol)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Cleanup message data */ mlfi_cleanup_message(mlfi); /* Save queue id */ if ((qid = smfi_getsymval(ctx, "i")) != NULL) { if ((mlfi->mlfi_qid = strdup(qid)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } logqidmsg(mlfi, LOG_DEBUG, "MAIL FROM: %s", *envfrom); /* Save from mail address */ if (*envfrom != NULL && **envfrom != '\0') { if ((mlfi->mlfi_from = strdup(*envfrom)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Create working directory */ if (mlfi->mlfi_qid != NULL) { (void) snprintf(mlfi->mlfi_wrkdir, sizeof(mlfi->mlfi_wrkdir) - 1, "%s/af%s", working_dir, mlfi->mlfi_qid); if (mkdir(mlfi->mlfi_wrkdir, S_IRWXU|S_IRGRP|S_IXGRP) != 0) { mlfi->mlfi_wrkdir[0] = '\0'; } } if (mlfi->mlfi_wrkdir[0] == '\0') { (void) snprintf(mlfi->mlfi_wrkdir, sizeof(mlfi->mlfi_wrkdir) - 1, "%s/afXXXXXXXXXX", working_dir); if ((wrkdir = mkdtemp(mlfi->mlfi_wrkdir)) != NULL) { (void) strlcpy(mlfi->mlfi_wrkdir, wrkdir, sizeof(mlfi->mlfi_wrkdir)); } else { logqidmsg(mlfi, LOG_ERR, "could not create working directory: %s", strerror(errno)); mlfi->mlfi_wrkdir[0] = '\0'; mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } if (chmod(mlfi->mlfi_wrkdir, S_IRWXU|S_IRGRP|S_IXGRP) == -1) { logqidmsg(mlfi, LOG_ERR, "could not change mode of directory %s: %s", mlfi->mlfi_wrkdir, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } logqidmsg(mlfi, LOG_DEBUG, "create working directory %s", mlfi->mlfi_wrkdir); /* Open file to store this message */ (void) snprintf(mlfi->mlfi_fname, sizeof(mlfi->mlfi_fname) - 1, "%s/email.txt", mlfi->mlfi_wrkdir); if ((mlfi->mlfi_fp = fopen(mlfi->mlfi_fname, "w+")) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not create message file %s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } if (fchmod(fileno(mlfi->mlfi_fp), S_IRUSR|S_IWUSR|S_IRGRP) == -1) { logqidmsg(mlfi, LOG_ERR, "could not change mode of file %s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "create message file %s", mlfi->mlfi_fname); /* Get transaction date */ if ((date = smfi_getsymval(ctx, "b")) == NULL) { (void) time(&t); gt = *gmtime(&t); lt = *localtime(&t); gmtoff = (lt.tm_hour - gt.tm_hour) * 60 + lt.tm_min - gt.tm_min; if (lt.tm_year < gt.tm_year) { gmtoff -= 24 * 60; } else if (lt.tm_year > gt.tm_year) { gmtoff += 24 * 60; } else if (lt.tm_yday < gt.tm_yday) { gmtoff -= 24 * 60; } else if (lt.tm_yday > gt.tm_yday) { gmtoff += 24 * 60; } if (lt.tm_sec <= gt.tm_sec - 60) { gmtoff -= 1; } else if (lt.tm_sec >= gt.tm_sec + 60) { gmtoff += 1; } if (snprintf(buf, sizeof(buf), #ifdef HAVE_STRUCT_TM_TM_ZONE "%s, %d %s %d %02d:%02d:%02d %+03d%02d (%s)", #else "%s, %d %s %d %02d:%02d:%02d %+03d%02d", #endif days[lt.tm_wday], lt.tm_mday, months[lt.tm_mon], lt.tm_year + 1900, lt.tm_hour, lt.tm_min, lt.tm_sec, (int) gmtoff / 60, (int) abs(gmtoff) % 60 #ifdef HAVE_STRUCT_TM_TM_ZONE , lt.tm_zone #endif ) < sizeof(buf)) { date = buf; } } /* Write synthesized received header to the file as the first header:*/ /* Received: from ( []) (authenticated bits=)*/ /* by ( []) */ /* with (authenticated as ) id ; */ /* */ /* (envelope-from ) */ *mlfi->mlfi_amabuf = '\0'; l = snprintfcat(0, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, "Received: from %s", mlfi->mlfi_helo != NULL && *mlfi->mlfi_helo != '\0' ? mlfi->mlfi_helo : "unknown"); if ((mlfi->mlfi_client_host != NULL && *mlfi->mlfi_client_host != '\0') || (mlfi->mlfi_client_addr != NULL && *mlfi->mlfi_client_addr != '\0')) { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, " ("); if (mlfi->mlfi_client_host != NULL && *mlfi->mlfi_client_host != '\0') { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, "%s", mlfi->mlfi_client_host); } l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, " "); if (mlfi->mlfi_client_addr != NULL && *mlfi->mlfi_client_addr != '\0') { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, "[%s]", mlfi->mlfi_client_addr); } l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, ")"); } if ((auth_type = smfi_getsymval(ctx, "{auth_type}")) != NULL) { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, " (authenticated"); auth_ssf = smfi_getsymval(ctx, "{auth_ssf}"); if (auth_ssf != NULL && *auth_ssf != '\0') { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, " bits=%s", auth_ssf); } l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, ")"); } l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, "\n\tby %s (" PACKAGE ")", mlfi->mlfi_hostname != NULL && *mlfi->mlfi_hostname != '\0' ? mlfi->mlfi_hostname : "localhost"); if (mlfi->mlfi_protocol != NULL && *mlfi->mlfi_protocol != '\0') { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, " with %s", mlfi->mlfi_protocol); } auth_authen = smfi_getsymval(ctx, "{auth_authen}"); if (auth_type != NULL && auth_authen != NULL && *auth_authen != '\0' ) { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, " (authenticated as %s)", auth_authen); } if (mlfi->mlfi_qid != NULL && *mlfi->mlfi_qid != '\0') { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, " id %s", mlfi->mlfi_qid); } l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, ";\n"); if (date != NULL && *date != '\0') { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, "\t%s\n", date); } l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, "\t(envelope-from %s)\n", mlfi->mlfi_from != NULL && *mlfi->mlfi_from != '\0' ? mlfi->mlfi_from : "<>"); logqidmsg(mlfi, LOG_DEBUG, "ADDHDR: %s", mlfi->mlfi_amabuf); (void) fputs(mlfi->mlfi_amabuf, mlfi->mlfi_fp); if (ferror(mlfi->mlfi_fp)) { logqidmsg(mlfi, LOG_ERR, "could not write to message file %s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Policy bank names */ if (auth_type != NULL) { *mlfi->mlfi_amabuf = '\0'; l = snprintfcat(0, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, "SMTP_AUTH,SMTP_AUTH_%s", auth_type); if (auth_ssf != NULL && *auth_ssf != '\0') { l = snprintfcat(l, mlfi->mlfi_amabuf, mlfi->mlfi_amabuf_length, ",SMTP_AUTH_%s_%s", auth_type, auth_ssf); } if ((mlfi->mlfi_policy_bank = strdup(mlfi->mlfi_amabuf)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_ENVRCPT - Handle the envelope RCPT command ** ** mlfi_envrcpt() is called once per recipient, hence one or more times ** per message, immediately after mlfi_envfrom() */ sfsistat mlfi_envrcpt(SMFICTX *ctx, char **envrcpt) { struct mlfiCtx *mlfi = MLFICTX(ctx); struct mlfiAddress *rcpt, *r; int rcptlen; /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_ERR, "mlfi_envrcpt: context is not set"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "RCPT TO: %s", *envrcpt); /* Store recipient address */ rcptlen = strlen(*envrcpt); if ((rcpt = malloc(sizeof(*rcpt) + rcptlen)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } (void) strlcpy(rcpt->q_paddr, *envrcpt, rcptlen + 1); rcpt->q_next = NULL; if (mlfi->mlfi_rcpt == NULL) { mlfi->mlfi_rcpt = rcpt; } else { r = mlfi->mlfi_rcpt; while (r->q_next != NULL) { r = r->q_next; } r->q_next = rcpt; } /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_HEADER - Handle a message header ** ** mlfi_header() is called zero or more times between mlfi_envrcpt() and ** mlfi_eoh(), once per message header */ sfsistat mlfi_header(SMFICTX *ctx, char *headerf, char *headerv) { struct mlfiCtx *mlfi = MLFICTX(ctx); /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_ERR, "mlfi_header: context is not set"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "HEADER: %s: %s", headerf, headerv); /* Write the header to the message file */ (void) fprintf(mlfi->mlfi_fp, "%s: %s\n", headerf, headerv); if (ferror(mlfi->mlfi_fp)) { logqidmsg(mlfi, LOG_ERR, "could not write to message file %s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_EOH - Handle the end of message headers ** ** mlfi_eoh() is called once after all headers have been sent and processed */ sfsistat mlfi_eoh(SMFICTX *ctx) { struct mlfiCtx *mlfi = MLFICTX(ctx); /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_ERR, "mlfi_eoh: context is not set"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "MESSAGE BODY"); /* Write the blank line between the header and the body */ (void) fprintf(mlfi->mlfi_fp, "\n"); if (ferror(mlfi->mlfi_fp)) { logqidmsg(mlfi, LOG_ERR, "could not write to message file %s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_BODY - Handle a piece of a message's body ** ** mlfi_body() is called zero or more times between mlfi_eoh() and mlfi_eom() */ sfsistat mlfi_body(SMFICTX *ctx, unsigned char * bodyp, size_t bodylen) { struct mlfiCtx *mlfi = MLFICTX(ctx); unsigned char *b, *c; /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_ERR, "mlfi_body: context is not set"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "body chunk: %ld", (long)bodylen); /* Check if previous chunk ends with CR */ if (mlfi->mlfi_cr_flag != 0) { mlfi->mlfi_cr_flag = 0; if (*bodyp != '\n') { (void) fprintf(mlfi->mlfi_fp, "\r"); if (ferror(mlfi->mlfi_fp)) { logqidmsg(mlfi, LOG_ERR, "could not write to message file " "%s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } } /* Convert CRLF to LF */ b = c = bodyp; while (c < bodyp + bodylen) { if (mlfi->mlfi_cr_flag != 0) { mlfi->mlfi_cr_flag = 0; if (*c != '\n') { *b++ = '\r'; } *b++ = *c++; } else if (*c == '\r') { mlfi->mlfi_cr_flag = 1; c++; } else { *b++ = *c++; } } bodylen = b - bodyp; logqidmsg(mlfi, LOG_DEBUG, "after CRLF to LF conversion: %ld", (long)(bodylen)); /* Write the body chunk to the message file */ if (fwrite(bodyp, bodylen, 1, mlfi->mlfi_fp) < 1) { logqidmsg(mlfi, LOG_ERR, "could not write to message file %s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_EOM - Handle the end of a message ** ** mlfi_eom() is called once after all calls to mlfi_body() ** for a given message */ sfsistat mlfi_eom(SMFICTX *ctx) { int i; char *idx, *header, *rcode, *xcode, *name, *value; const char *qid; sfsistat rstat; struct mlfiCtx *mlfi = MLFICTX(ctx); struct mlfiAddress *rcpt; struct sockaddr_un amavisd_sock; time_t start_counter; int wait_counter; /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_ERR, "mlfi_eom: context is not set"); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "CONTENT CHECK"); /* Close the message file */ if (mlfi->mlfi_fp == NULL) { logqidmsg(mlfi, LOG_ERR, "message file %s is not opened", mlfi->mlfi_fname); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } if (fclose(mlfi->mlfi_fp) == -1) { mlfi->mlfi_fp = NULL; logqidmsg(mlfi, LOG_ERR, "could not close message file %s: %s", mlfi->mlfi_fname, strerror(errno)); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } mlfi->mlfi_fp = NULL; logqidmsg(mlfi, LOG_DEBUG, "close message file %s", mlfi->mlfi_fname); /* Connect to amavisd */ if (max_sem != NULL) { start_counter = time(NULL); wait_counter = MIN(SMFI_PROGRESS_TRIGGER, max_wait); while (amavisd_connect(mlfi, &amavisd_sock, start_counter + wait_counter) == -1) { if (errno != AMAVISD_CONNECT_TIMEDOUT_ERRNO) { if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } if (wait_counter >= max_wait) { logqidmsg(mlfi, LOG_WARNING, "amavisd connection is not available for %d sec, giving up", wait_counter); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } #ifdef HAVE_SMFI_PROGRESS logqidmsg(mlfi, LOG_DEBUG, "amavisd connection is not available for %d sec, " "triggering sendmail", wait_counter); if (smfi_progress(ctx) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not notify MTA that an operation is still in " "progress"); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } #else logqidmsg(mlfi, LOG_DEBUG, "amavisd connection not available for %d sec, waiting", wait_counter); #endif wait_counter += MIN(SMFI_PROGRESS_TRIGGER, max_wait - wait_counter); } logqidmsg(mlfi, LOG_DEBUG, "got amavisd connection for %d sec", (int)(time(NULL) - start_counter)); #ifdef HAVE_SMFI_PROGRESS if (smfi_progress(ctx) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not notify MTA that an operation is still in progress"); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } #endif } else { if (amavisd_connect(mlfi, &amavisd_sock, 0) == -1) { logqidmsg(mlfi, LOG_ERR, "could not connect to amavisd socket %s: %s", amavisd_socket, strerror(errno)); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } logqidmsg(mlfi, LOG_DEBUG, "AMAVISD REQUEST"); /* AM.PDP protocol prologue */ logqidmsg(mlfi, LOG_DEBUG, "request=AM.PDP"); if (amavisd_request(mlfi, "request", "AM.PDP") == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Get queue id (Postfix does give information about */ /* the queue-number only after the RCPT-TO-phase */ if (mlfi->mlfi_qid == NULL) { if ((qid = smfi_getsymval(ctx, "i")) != NULL) { if ((mlfi->mlfi_qid = strdup(qid)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not allocate memory"); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } } /* MTA queue id */ if (mlfi->mlfi_qid != NULL) { logqidmsg(mlfi, LOG_DEBUG, "queue_id=%s", mlfi->mlfi_qid); if (amavisd_request(mlfi, "queue_id", mlfi->mlfi_qid) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Communication protocol */ if (mlfi->mlfi_protocol != NULL) { logqidmsg(mlfi, LOG_DEBUG, "protocol_name=%s", mlfi->mlfi_protocol); if (amavisd_request(mlfi, "protocol_name", mlfi->mlfi_protocol) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Envelope sender address */ logqidmsg(mlfi, LOG_DEBUG, "sender=%s", mlfi->mlfi_from); if (amavisd_request(mlfi, "sender", mlfi->mlfi_from) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Envelope recipient addresses */ rcpt = mlfi->mlfi_rcpt; while (rcpt != NULL) { logqidmsg(mlfi, LOG_DEBUG, "recipient=%s", rcpt->q_paddr); if (amavisd_request(mlfi, "recipient", rcpt->q_paddr) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } rcpt = rcpt->q_next; } /* Working directory */ logqidmsg(mlfi, LOG_DEBUG, "tempdir=%s", mlfi->mlfi_wrkdir); if (amavisd_request(mlfi, "tempdir", mlfi->mlfi_wrkdir) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Who is responsible for removing the working directory */ logqidmsg(mlfi, LOG_DEBUG, "tempdir_removed_by=client"); if (amavisd_request(mlfi, "tempdir_removed_by", "client") == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* File containing the original mail */ logqidmsg(mlfi, LOG_DEBUG, "mail_file=%s", mlfi->mlfi_fname); if (amavisd_request(mlfi, "mail_file", mlfi->mlfi_fname) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Who is responsible for forwarding the message */ logqidmsg(mlfi, LOG_DEBUG, "delivery_care_of=%s", delivery_care_of); if (amavisd_request(mlfi, "delivery_care_of", delivery_care_of) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* IP address of the original SMTP client */ logqidmsg(mlfi, LOG_DEBUG, "client_address=%s", mlfi->mlfi_client_addr); if (amavisd_request(mlfi, "client_address", mlfi->mlfi_client_addr) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* DNS name of the original SMTP client */ if (mlfi->mlfi_client_host != NULL) { logqidmsg(mlfi, LOG_DEBUG, "client_name=%s", mlfi->mlfi_client_host); if (amavisd_request(mlfi, "client_name", mlfi->mlfi_client_host) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* The value of the HELO or EHLO specified by the original SMTP client */ if (mlfi->mlfi_helo != NULL) { logqidmsg(mlfi, LOG_DEBUG, "helo_name=%s", mlfi->mlfi_helo); if (amavisd_request(mlfi, "helo_name", mlfi->mlfi_helo) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Policy bank names */ if (mlfi->mlfi_policy_bank != NULL) { logqidmsg(mlfi, LOG_DEBUG, "policy_bank=%s", mlfi->mlfi_policy_bank); if (amavisd_request(mlfi, "policy_bank", mlfi->mlfi_policy_bank) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* End of amavisd request */ if (amavisd_request(mlfi, NULL, NULL) == -1) { logqidmsg(mlfi, LOG_ERR, "could not write to socket %s: %s", amavisd_socket, strerror(errno)); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } logqidmsg(mlfi, LOG_DEBUG, "AMAVISD RESPONSE"); /* Process response from amavisd */ rstat = SMFIS_TEMPFAIL; while (amavisd_response(mlfi) != -1) { name = mlfi->mlfi_amabuf; /* Last response */ if (*name == '\0') { amavisd_close(mlfi); return rstat; } /* Get name and value */ /* = */ if ((value = strchr(name, '=')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s", name); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; /* AM.PDP protocol version */ /* version_server= */ if (strcmp(name, "version_server") == 0) { logqidmsg(mlfi, LOG_DEBUG, "%s=%s", name, value); i = (int) strtol(value, &header, 10); if (header != NULL && *header != '\0') { logqidmsg(mlfi, LOG_ERR, "malformed line %s=%s", name, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } if (i > AMPDP_VERSION) { logqidmsg(mlfi, LOG_ERR, "incompatible AM.PDP protocol version %s", value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Add recipient */ /* addrcpt= */ } else if (strcmp(name, "addrcpt") == 0) { logqidmsg(mlfi, LOG_INFO, "%s=%s", name, value); if (smfi_addrcpt(ctx, value) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not add recipient %s", value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Delete recipient */ /* delrcpt= */ } else if (strcmp(name, "delrcpt") == 0) { logqidmsg(mlfi, LOG_INFO, "%s=%s", name, value); if (smfi_delrcpt(ctx, value) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not delete recipient %s", value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Append header */ /* addheader=
*/ } else if (strcmp(name, "addheader") == 0) { logqidmsg(mlfi, LOG_INFO, "%s=%s", name, value); header = value; if ((value = strchr(header, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s", name, header); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; #ifdef HAVE_SMFI_INSHEADER if (smfi_insheader(ctx, INT_MAX, header, value) != MI_SUCCESS) { #else if (smfi_addheader(ctx, header, value) != MI_SUCCESS) { #endif logqidmsg(mlfi, LOG_ERR, "could not append header %s: %s", header, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Insert header */ /* insheader=
*/ } else if (strcmp(name, "insheader") == 0) { logqidmsg(mlfi, LOG_INFO, "%s=%s", name, value); idx = value; if ((value = strchr(idx, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s", name, idx); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; i = (int) strtol(idx, &header, 10); if (header != NULL && *header != '\0') { logqidmsg(mlfi, LOG_ERR, "malformed line %s=%s %s", name, idx, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } header = value; if ((value = strchr(header, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s %s", name, idx, header); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; #ifdef HAVE_SMFI_INSHEADER if (smfi_insheader(ctx, i, header, value) != MI_SUCCESS) { #else if (smfi_addheader(ctx, header, value) != MI_SUCCESS) { #endif logqidmsg(mlfi, LOG_ERR, "could not insert header %s %s: %s", idx, header, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Change header */ /* chgheader=
*/ } else if (strcmp(name, "chgheader") == 0) { logqidmsg(mlfi, LOG_INFO, "%s=%s", name, value); idx = value; if ((value = strchr(idx, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s", name, idx); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; i = (int) strtol(idx, &header, 10); if (header != NULL && *header != '\0') { logqidmsg(mlfi, LOG_ERR, "malformed line %s=%s %s", name, idx, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } header = value; if ((value = strchr(header, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s %s", name, idx, header); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; if (smfi_chgheader(ctx, header, i, value) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not change header %s %s: %s", idx, header, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Delete header */ /* delheader=
*/ } else if (strcmp(name, "delheader") == 0) { logqidmsg(mlfi, LOG_INFO, "%s=%s", name, value); idx = value; if ((value = strchr(idx, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s", name, idx); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; i = (int) strtol(idx, &header, 10); if (header != NULL && *header != '\0') { logqidmsg(mlfi, LOG_ERR, "malformed line %s=%s %s", name, idx, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } if (smfi_chgheader(ctx, value, i, NULL) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not delete header %s %s:", idx, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } #ifdef HAVE_SMFI_QUARANTINE /* Quarantine message */ /* quarantine= */ } else if (strcmp(name, "quarantine") == 0) { logqidmsg(mlfi, LOG_INFO, "%s=%s", name, value); if (smfi_quarantine(ctx, value) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not quarantine message (%s)", value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } #endif /* Set response code */ /* return_value= */ } else if (strcmp(name, "return_value") == 0) { logqidmsg(mlfi, LOG_NOTICE, "%s=%s", name, value); if (strcmp(value, "continue") == 0) { rstat = SMFIS_CONTINUE; } else if (strcmp(value, "accept") == 0) { rstat = SMFIS_ACCEPT; } else if (strcmp(value, "reject") == 0) { rstat = SMFIS_REJECT; } else if (strcmp(value, "discard") == 0) { rstat = SMFIS_DISCARD; } else if (strcmp(value, "tempfail") == 0) { rstat = SMFIS_TEMPFAIL; } else { logqidmsg(mlfi, LOG_ERR, "unknown return value %s", value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* Set SMTP reply */ /* setreply= */ } else if (strcmp(name, "setreply") == 0) { rcode = value; if ((value = strchr(rcode, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s", name, rcode); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; xcode = value; if ((value = strchr(xcode, ' ')) == NULL) { logqidmsg(mlfi, LOG_ERR, "malformed line: %s=%s %s", name, rcode, xcode); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } *value++ = '\0'; /* smfi_setreply accept only 4xx and 5XX codes */ if (*rcode == '4' || *rcode == '5') { logqidmsg(mlfi, LOG_INFO, "%s=%s %s %s", name, rcode, xcode, value); if (smfi_setreply(ctx, rcode, xcode, value) != MI_SUCCESS) { logqidmsg(mlfi, LOG_ERR, "could not set reply %s %s %s", rcode, xcode, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } else { logqidmsg(mlfi, LOG_DEBUG, "%s=%s %s %s", name, rcode, xcode, value); } /* Amavisd log id */ /* log_id= */ } else if (strcmp(name, "log_id") == 0) { logqidmsg(mlfi, LOG_NOTICE, "%s=%s", name, value); /* Exit code */ /* exit_code= */ } else if (strcmp(name, "exit_code") == 0) { /* ignore legacy exit_code */ logqidmsg(mlfi, LOG_DEBUG, "%s=%s", name, value); /* Unknown response */ } else { logqidmsg(mlfi, LOG_ERR, "unknown amavisd response %s=%s", name, value); amavisd_close(mlfi); mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } } /* Amavisd response fail */ logqidmsg(mlfi, LOG_ERR, "could not read from amavisd socket %s: %s", amavisd_socket, strerror(errno)); logqidmsg(mlfi, LOG_DEBUG, "amavisd response line %s", mlfi->mlfi_amabuf); amavisd_close(mlfi); if (ignore_amavisd_error) { return SMFIS_CONTINUE; } mlfi_setreply_tempfail(ctx); return SMFIS_TEMPFAIL; } /* ** MLFI_ABORT - Handle the current message's being aborted ** ** mlfi_abort() must reclaim any resources allocated on a per-message ** basis, and must be tolerant of being called between any two ** message-oriented callbacks */ sfsistat mlfi_abort(SMFICTX *ctx) { struct mlfiCtx *mlfi = MLFICTX(ctx); logqidmsg(mlfi, LOG_DEBUG, "ABORT"); /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_DEBUG, "mlfi_abort: context is not set"); return SMFIS_CONTINUE; } /* Cleanup message data */ mlfi_cleanup_message(mlfi); /* Continue processing */ return SMFIS_CONTINUE; } /* ** MLFI_CLOSE - The current connection is being closed ** ** mlfi_close() is always called once at the end of each connection */ sfsistat mlfi_close(SMFICTX *ctx) { struct mlfiCtx *mlfi = MLFICTX(ctx); logqidmsg(mlfi, LOG_DEBUG, "CLOSE"); /* Check milter private data */ if (mlfi == NULL) { logqidmsg(mlfi, LOG_DEBUG, "mlfi_close: context is not set"); return SMFIS_CONTINUE; } /* Release private data */ mlfi_cleanup(mlfi); if (smfi_setpriv(ctx, NULL) != MI_SUCCESS) { /* NOTE: smfi_setpriv return MI_FAILURE when ctx is NULL */ /* logqidmsg(NULL, LOG_ERR, "could not release milter context"); */ } /* Continue processing */ return SMFIS_CONTINUE; } amavisd-milter-1.5.0/amavisd-milter/log.c000644 001751 001751 00000005415 10542027606 020243 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: log.c,v 1.6 2006/12/19 18:29:26 reho Exp $ */ #include "amavisd-milter.h" #include /* ** LOGMSG - Print log message */ void logmsg(int priority, const char *fmt, ...) { char buf[MAXLOGBUF]; va_list ap; if (priority <= debug_level || priority <= LOG_WARNING) { /* Format message */ va_start(ap, fmt); (void) vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); /* Write message to syslog */ syslog(priority, "%s", buf); /* Print message to terminal */ if (!daemonized) { (void) fprintf(stdout, "%s\n", buf); } } } /* ** LOGQIDMSG - Log message with mail queue id */ void logqidmsg(struct mlfiCtx *mlfi, int priority, const char *fmt, ...) { char buf[MAXLOGBUF]; const char *p; va_list ap; /* Format message */ va_start(ap, fmt); (void) vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); /* Print log message */ if (mlfi != NULL) { if (mlfi->mlfi_qid != NULL) { p = mlfi->mlfi_qid; } else if (mlfi->mlfi_prev_qid != NULL) { p = mlfi->mlfi_prev_qid; } else if (mlfi->mlfi_client_host != NULL) { p = mlfi->mlfi_client_host; } else { p = "UNKNOWN"; } } else { p = "NOQUEUE"; } logmsg(priority, "%s: %s", p, buf); } amavisd-milter-1.5.0/amavisd-milter/amavisd-milter.h000644 001751 001751 00000012737 11261510136 022404 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: amavisd-milter.h,v 1.27 2009/10/02 23:19:33 reho Exp $ */ #ifndef _AMAVISD_MILTER_H #define _AMAVISD_MILTER_H #include "compat.h" /* AM.PDP protocol version */ #define AMPDP_VERSION 2 /* Maximum message buffers length */ #define MAXLOGBUF 1024 /* syslog message buffer */ #define MAXAMABUF 65536 /* amavisd communication buffer */ #define AMABUFCHUNK 2048 /* amavisd buffer reallocation step */ /* Timeouts */ #define SMFI_PROGRESS_TRIGGER 60 /* smfi_progress trigger */ struct mlfiCtx; /* Address list */ struct mlfiAddress { struct mlfiAddress *q_next; /* next recipient */ char q_paddr[1]; /* recipient */ }; /* Milter private data structure */ struct mlfiCtx { char *mlfi_hostname; /* sendmail hostname */ char *mlfi_client_addr; /* remote host address */ char *mlfi_client_host; /* remote host name */ char *mlfi_helo; /* remote host helo */ char *mlfi_protocol; /* communication protocol */ char *mlfi_qid; /* queue id */ char *mlfi_prev_qid; /* previous queue id */ char *mlfi_from; /* mail sender */ struct mlfiAddress *mlfi_rcpt; /* mail recipients */ char mlfi_wrkdir[MAXPATHLEN];/* working directory */ char mlfi_fname[MAXPATHLEN]; /* mail file name */ FILE *mlfi_fp; /* mail file handler */ int mlfi_max_sem_locked; /* connections semaphore locked */ char *mlfi_amabuf; /* amavisd communication buffer */ size_t mlfi_amabuf_length; /* amavisd buffer length */ int mlfi_amasd; /* amavisd socket descriptor */ char *mlfi_policy_bank; /* policy bank names */ int mlfi_cr_flag; /* CR at the end of the body chunk */ }; /* Get private data from libmilter */ #define MLFICTX(ctx) ((struct mlfiCtx *)smfi_getpriv(ctx)) /* Milter description */ extern struct smfiDesc smfilter; /* Milter functions */ extern sfsistat mlfi_connect(SMFICTX *, char *, _SOCK_ADDR *); extern sfsistat mlfi_helo(SMFICTX *, char *); extern sfsistat mlfi_envfrom(SMFICTX *, char **); extern sfsistat mlfi_envrcpt(SMFICTX *, char **); extern sfsistat mlfi_header(SMFICTX *, char *, char *); extern sfsistat mlfi_eoh(SMFICTX *); extern sfsistat mlfi_body(SMFICTX *, unsigned char *, size_t); extern sfsistat mlfi_eom(SMFICTX *); extern sfsistat mlfi_close(SMFICTX *); extern sfsistat mlfi_abort(SMFICTX *); /* Global variables */ extern int daemonize; /* run as daemon */ extern int daemonized; /* is daemon */ extern int debug_level; /* max debug level */ extern int max_conns; /* max amavisd connections */ extern int max_wait; /* max wait for connection */ extern sem_t *max_sem; /* amavisd connections semaphore */ extern const char *pid_file; /* pid file name */ extern const char *mlfi_socket; /* sendmail milter socket */ #ifdef HAVE_SMFI_SETBACKLOG extern int mlfi_socket_backlog; /* milter socket backlog */ #endif extern long mlfi_timeout; /* connection timeout */ extern const char *amavisd_socket; /* amavisd socket */ extern long amavisd_timeout; /* connection timeout */ extern int ignore_amavisd_error; /* pass through when amavisd failed */ extern const char *working_dir; /* working ditectory name */ extern const char *delivery_care_of; /* delivery mechanism */ /* Amavisd communication */ extern int amavisd_connect(struct mlfiCtx *, struct sockaddr_un *, time_t timeout); extern int amavisd_request(struct mlfiCtx *, const char *, const char *); extern int amavisd_response(struct mlfiCtx *); extern void amavisd_close(struct mlfiCtx *); /* errno value if amavisd_connect() timed out. */ #ifdef HAVE_SEM_TIMEDWAIT # define AMAVISD_CONNECT_TIMEDOUT_ERRNO ETIMEDOUT #else # define AMAVISD_CONNECT_TIMEDOUT_ERRNO EAGAIN #endif /* Log message */ extern void logmsg(int, const char *, ...); extern void logqidmsg(struct mlfiCtx *, int, const char *, ...); /* Macros */ #ifndef MAX #define MAX(a,b) (((a)>(b))?(a):(b)) #endif #ifndef MIN #define MIN(a,b) (((a)<(b))?(a):(b)) #endif #endif /* _AMAVISD_MILTER_H */ amavisd-milter-1.5.0/amavisd-milter/amavisd-milter.8000644 001751 001751 00000020154 11347266661 022334 0ustar00rehoreho000000 000000 .\" .\" $Id: amavisd-milter.8,v 1.21 2010/03/14 23:13:53 reho Exp $ .\" .Dd Januar 23, 2006 .Dt amavisd-milter 8 .Os .Sh NAME .Nm amavisd-milter .Nd sendmail milter for amavisd-new .Sh SYNOPSIS .Nm .Op Fl fhv .Op Fl d Ar debug-level .Op Fl D Ar delivery-care-of .Op Fl m Ar max-conns .Op Fl M Ar max-wait .Op Fl p Ar pidfile .Op Fl P .Op Fl q Ar backlog .Op Fl s Ar socket .Op Fl t Ar timeout .Op Fl S Ar socket .Op Fl T Ar timeout .Op Fl w Ar directory .Sh DESCRIPTION The .Nm is a sendmail milter (mail filter) for .Sy amavisd-new 2.4.3 and above and .Sy sendmail 8.13 and above (limited support for 8.12 is provided). .Pp Instead of older .Sy amavis-milter helper program, full .Sy amavisd-new functionality is available, including adding spam and virus information header fields, modifying Subject, adding address extensions and removing certain recipients from delivery while delivering the same message to the rest. .Pp For more information you can visit amavisd-milter website: .Bd -literal -offset indent http://amavisd-milter.sourceforge.net/ .Ed .Pp and SourceForge project: .Bd -literal -offset indent http://sourceforge.net/projects/amavisd-milter .Ed .Ss Options The options are as follows: .Bl -tag -width indent .It Fl d Ar debug-level Set the debug level to .Sy debug-level Ns \&. Debugging traces become more verbose as the debug level increases. Maximum is 9. .It Fl D Ar delivery-care-of Set AM.PDP request attribute delivery_care_of to .Sy client (default) or .Sy server Ns \&. When .Sy client method is used then .Sy amavisd-milter is responsible to forward the message to recipients. This method doesn't allow personalized header or body modification. .Pp When .Sy server method is used then .Sy amavisd-new is responsible to forward the message to recipients and can provide personalized header and body modification. $forward_method in amavisd.conf must point to some place willing to accept mail without further checking in .Sy amavisd-new Ns \&. .It Fl f Run .Nm in the foreground (i.e. do not daemonize). Print debug messages to the terminal. .It Fl h Print help page and exit. .It Fl m Ar max-conns Maximum concurrent .Sy amavisd connections (default 0 - unlimited number of connections). It must agree with the $max_servers entry in amavisd.conf. .It Fl M Ar max-wait Maximum wait for connection to .Sy amavisd in seconds (default 300 = 5 minutes). It must be less then sending MTA timeout for a response to the final "." that terminates a message on sending MTA. .Sy sendmail has default value 1 hour, .Sy postfix 10 minutes and .Sy qmail 20 minutes. We suggest to use less than 10 minutes. .It Fl p Ar pidfile Use this pid file (default /var/amavis/amavisd-milter.pid). .It Fl P When .Sy amavisd-new fails mail will be passed through unchecked. .It Fl q Ar backlog Sets the incoming socket backlog used by .Xr listen 2 Ns \&. If it is not set or set to zero, the operating system default is used. .It Fl s Ar socket Communication socket between .Sy sendmail and .Nm (default /var/amavis/amavisd-milter.sock). The protocol spoken over this socket is .Sy MILTER (Mail FILTER). It must agree with the INPUT_MAIL_FILTER entry in sendmail.mc .Pp The .Ar socket should be in "proto:address" format: .Bl -bullet -compact .It .Sy {unix|local}:/path/to/file - A named pipe. .It .Sy inet:port@{hostname|ip-address} - An IPV4 socket. .It .Sy inet6:port@{hostname|ip-address} - An IPV6 socket. .El .It Fl S Ar socket Communication socket between .Nm and .Sy amavisd-new (default /var/amavis/amavisd.sock). The protocol spoken over this socket is .Sy AM.PDP (AMavis Policy Delegation Protocol). It must agree with the $unix_socketname entry in amavisd.conf. .Pp The .Ar socket should be in "proto:address" format: .Bl -bullet -compact .It .Sy {unix|local}:/path/to/file - A named pipe. .El .It Fl t Ar timeout .Sy sendmail connection timeout in seconds (default 600 = 10 minutes). It must agree with the INPUT_MAIL_FILTER entry in sendmail.mc and must be greater than or equal to the .Sy amavisd-new connection timeout. When you use other milters (especially time-consuming), the timeout must be sufficient to process message in all milters. .It Fl T Ar timeout .Sy amavisd-new connection timeout in seconds (default 600 = 10 minutes). This timeout must be sufficient for message processing in .Sy amavisd-new Ns \&. It's usually a good idea to adjust them to the same value as .Sy sendmail connection timeout. .It Fl v Report the version number and exit. .It Fl w Ar directory Set working directory (default /var/amavis). .El .Ss Limited support for sendmail 8.12 .Bl -bullet -compact .It .Fn smfi_addheader is used instead of .Fn smfi_insheader for .Li insheader and .Li addheader AM.PDP responses. This works well with .Sy amavisd-new 2.4.3 or newer. .It .Fn smfi_progress isn't called when .Sy amavisd-milter wait for .Sy amavisd-new communication socket. .It AM.PDP response .Li quarantine isn't implemented. .El .Pp .Sh FILES .Bl -tag -width indent .It Em /var/amavis/amavisd-milter.pid The default process-id file. .It Em /var/amavis/amavisd-milter.sock The default .Sy sendmail communication socket. .It Em /var/amavis/amavisd.sock Th default .Sy amavisd-new communication socket. .It Em /var/amavis The default working directory. .El .Sh POLICY BANK When remote client is authenticated, .Sy amavisd-milter forward this information to .Sy amavisd-new through AM.PDP request attribute .Sy policy_bank Ns : .Bl -tag -width indent .It Sy SMTP_AUTH Indicate that the remote client is authenticated. .It Sy SMTP_AUTH_ Remote client authentication mechanism. .It Sy SMTP_AUTH__ The number of bits used for the key of the symmetric cipher when authentication mechanism use it. .El .Sh EXAMPLES .Ss Configuring amavisd-new In amavisd.conf file change protocol and socket settings to: .Bd -literal -offset indent $protocol = "AM.PDP"; # Use AM.PDP protocol $unix_socketname = "$MYHOME/amavisd.sock"; # Listen on Unix socket ### $inet_socket_port = 10024; # Don't listen on TCP port .Ed .Pp Then (re)start amavisd daemon. .Ss Configuring sendmail To the sendmail.mc file add the following entries: .Bd -literal -offset indent define(`confMILTER_MACROS_ENVFROM', confMILTER_MACROS_ENVFROM`, r, b') INPUT_MAIL_FILTER(`amavisd-milter', `S=local:/var/amavis/amavisd-milter.sock, F=T, T=S:10m;R:10m;E:10m') .Ed .Pp Then rebuild your sendmail.cf file, install it (usually to /etc/mail/sendmail.cf) and (re)start sendmail daemon. .Ss Running Nm This example assume that .Sy amavisd-new is running as user .Sy amavis Ns \&. It must agree with the entry $daemon_user in amavisd.conf. .Pp First create working directory: .Bd -literal -offset indent mkdir /var/amavis/tmp chmod 750 /var/amavis/tmp chown amavis /var/amavis/tmp .Ed .Pp Then start .Nm as non-priviledged user amavis: .Pp .Dl su - amavis -c \&" Ns Nm Fl w Ar /var/amavis/tmp Ns \&" .Ss Limiting maximum concurrent connections to amavisd To limit concurrent connections to 4 and fail after 10 minutes (10*60 secs) of waiting run .Nm with this options: .Pp .Dl su - amavis -c \&" Ns Nm Fl w Ar /var/amavis/tmp Fl m Ar 4 Fl M Ar 600 Ns \&" .Ss Troubleshooting For troubleshooting run .Nm on the foreground and set debug level to appropriate level: .Pp .Dl su - amavis -c \&" Ns Nm Fl w Ar /var/amavis/tmp Fl f Fl d Ar level Ns \&" .Pp where debug levels are: .Bl -tag -width "XXXX" .It 1 Not errors but unexpected states (connection abort etc). .It 2 Main states in message processing. .It 3 All .Nm debug messages. .It 4-9 Milter communication debugging (smfi_setdbg 1-6). .El .Sh SEE ALSO .Bd -literal http://amavisd-milter.sourceforge.net http://www.ijs.si/software/amavisd/ http://www.milter.org/developers http://www.sendmail.org .Ed .Sh AUTHORS This manual page was written by Petr Rehor and is based on Jerzy Sakol initial work. .Sh BUGS A community mailing lists are available at: .Bd -literal -offset indent http://sourceforge.net/mail/?group_id=138169 .Ed .Pp Enhancements, requests and problem reports are welcome. .Pp If you run into problems first check the users mailing list archive before asking questions on the list. It's highly likely somebody has already come across the same problem and it's been solved. amavisd-milter-1.5.0/amavisd-milter/Makefile.in000644 001751 001751 00000055247 11367260555 021403 0ustar00rehoreho000000 000000 # Makefile.in generated by automake 1.10.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # $Id: Makefile.am,v 1.4 2006/10/04 20:46:55 reho Exp $ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ sbin_PROGRAMS = amavisd-milter$(EXEEXT) subdir = amavisd-milter DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/aclocal/acinclude.m4 \ $(top_srcdir)/aclocal/acx_pthread.m4 \ $(top_srcdir)/aclocal/ax_path_milter.m4 \ $(top_srcdir)/aclocal/dirfd.m4 $(top_srcdir)/aclocal/eilseq.m4 \ $(top_srcdir)/aclocal/eoverflow.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(sbin_PROGRAMS) am_amavisd_milter_OBJECTS = amavisd_milter-amavisd.$(OBJEXT) \ amavisd_milter-log.$(OBJEXT) amavisd_milter-main.$(OBJEXT) \ amavisd_milter-mlfi.$(OBJEXT) amavisd_milter_OBJECTS = $(am_amavisd_milter_OBJECTS) amavisd_milter_DEPENDENCIES = ../compat/libcompat.a DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/aclocal/depcomp am__depfiles_maybe = depfiles COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(amavisd_milter_SOURCES) DIST_SOURCES = $(amavisd_milter_SOURCES) man8dir = $(mandir)/man8 NROFF = nroff MANS = $(man_MANS) HEADERS = $(noinst_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EILSEQ = @EILSEQ@ EOVERFLOW = @EOVERFLOW@ EXEEXT = @EXEEXT@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ MILTER_CPPFLAGS = @MILTER_CPPFLAGS@ MILTER_LDFLAGS = @MILTER_LDFLAGS@ MILTER_LIBS = @MILTER_LIBS@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PTHREAD_CC = @PTHREAD_CC@ PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ PTHREAD_LIBS = @PTHREAD_LIBS@ RANLIB = @RANLIB@ SENDMAIL_BASE_DIR = @SENDMAIL_BASE_DIR@ SENDMAIL_OBJ_DIR = @SENDMAIL_OBJ_DIR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ acx_pthread_config = @acx_pthread_config@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target = @target@ target_alias = @target_alias@ target_cpu = @target_cpu@ target_os = @target_os@ target_vendor = @target_vendor@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ # Distribution files EXTRA_DIST = \ amavisd-milter.8 \ Makefile.am \ Makefile.in # Header files noinst_HEADERS = \ amavisd-milter.h # Manual pages man_MANS = \ amavisd-milter.8 # amavisd-milter compiling parameters amavisd_milter_SOURCES = \ amavisd.c \ log.c \ main.c \ mlfi.c amavisd_milter_LDADD = \ ../compat/libcompat.a amavisd_milter_CPPFLAGS = \ -I../compat all: all-am .SUFFIXES: .SUFFIXES: .c .o .obj $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign amavisd-milter/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign amavisd-milter/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" @list='$(sbin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ else :; fi; \ done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(sbin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ rm -f "$(DESTDIR)$(sbindir)/$$f"; \ done clean-sbinPROGRAMS: -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) amavisd-milter$(EXEEXT): $(amavisd_milter_OBJECTS) $(amavisd_milter_DEPENDENCIES) @rm -f amavisd-milter$(EXEEXT) $(LINK) $(amavisd_milter_OBJECTS) $(amavisd_milter_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amavisd_milter-amavisd.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amavisd_milter-log.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amavisd_milter-main.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amavisd_milter-mlfi.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` amavisd_milter-amavisd.o: amavisd.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-amavisd.o -MD -MP -MF $(DEPDIR)/amavisd_milter-amavisd.Tpo -c -o amavisd_milter-amavisd.o `test -f 'amavisd.c' || echo '$(srcdir)/'`amavisd.c @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-amavisd.Tpo $(DEPDIR)/amavisd_milter-amavisd.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='amavisd.c' object='amavisd_milter-amavisd.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-amavisd.o `test -f 'amavisd.c' || echo '$(srcdir)/'`amavisd.c amavisd_milter-amavisd.obj: amavisd.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-amavisd.obj -MD -MP -MF $(DEPDIR)/amavisd_milter-amavisd.Tpo -c -o amavisd_milter-amavisd.obj `if test -f 'amavisd.c'; then $(CYGPATH_W) 'amavisd.c'; else $(CYGPATH_W) '$(srcdir)/amavisd.c'; fi` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-amavisd.Tpo $(DEPDIR)/amavisd_milter-amavisd.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='amavisd.c' object='amavisd_milter-amavisd.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-amavisd.obj `if test -f 'amavisd.c'; then $(CYGPATH_W) 'amavisd.c'; else $(CYGPATH_W) '$(srcdir)/amavisd.c'; fi` amavisd_milter-log.o: log.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-log.o -MD -MP -MF $(DEPDIR)/amavisd_milter-log.Tpo -c -o amavisd_milter-log.o `test -f 'log.c' || echo '$(srcdir)/'`log.c @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-log.Tpo $(DEPDIR)/amavisd_milter-log.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='log.c' object='amavisd_milter-log.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-log.o `test -f 'log.c' || echo '$(srcdir)/'`log.c amavisd_milter-log.obj: log.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-log.obj -MD -MP -MF $(DEPDIR)/amavisd_milter-log.Tpo -c -o amavisd_milter-log.obj `if test -f 'log.c'; then $(CYGPATH_W) 'log.c'; else $(CYGPATH_W) '$(srcdir)/log.c'; fi` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-log.Tpo $(DEPDIR)/amavisd_milter-log.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='log.c' object='amavisd_milter-log.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-log.obj `if test -f 'log.c'; then $(CYGPATH_W) 'log.c'; else $(CYGPATH_W) '$(srcdir)/log.c'; fi` amavisd_milter-main.o: main.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-main.o -MD -MP -MF $(DEPDIR)/amavisd_milter-main.Tpo -c -o amavisd_milter-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-main.Tpo $(DEPDIR)/amavisd_milter-main.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='amavisd_milter-main.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c amavisd_milter-main.obj: main.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-main.obj -MD -MP -MF $(DEPDIR)/amavisd_milter-main.Tpo -c -o amavisd_milter-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-main.Tpo $(DEPDIR)/amavisd_milter-main.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='amavisd_milter-main.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` amavisd_milter-mlfi.o: mlfi.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-mlfi.o -MD -MP -MF $(DEPDIR)/amavisd_milter-mlfi.Tpo -c -o amavisd_milter-mlfi.o `test -f 'mlfi.c' || echo '$(srcdir)/'`mlfi.c @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-mlfi.Tpo $(DEPDIR)/amavisd_milter-mlfi.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mlfi.c' object='amavisd_milter-mlfi.o' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-mlfi.o `test -f 'mlfi.c' || echo '$(srcdir)/'`mlfi.c amavisd_milter-mlfi.obj: mlfi.c @am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT amavisd_milter-mlfi.obj -MD -MP -MF $(DEPDIR)/amavisd_milter-mlfi.Tpo -c -o amavisd_milter-mlfi.obj `if test -f 'mlfi.c'; then $(CYGPATH_W) 'mlfi.c'; else $(CYGPATH_W) '$(srcdir)/mlfi.c'; fi` @am__fastdepCC_TRUE@ mv -f $(DEPDIR)/amavisd_milter-mlfi.Tpo $(DEPDIR)/amavisd_milter-mlfi.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mlfi.c' object='amavisd_milter-mlfi.obj' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(amavisd_milter_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o amavisd_milter-mlfi.obj `if test -f 'mlfi.c'; then $(CYGPATH_W) 'mlfi.c'; else $(CYGPATH_W) '$(srcdir)/mlfi.c'; fi` install-man8: $(man8_MANS) $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)" @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.8*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 8*) ;; \ *) ext='8' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \ done uninstall-man8: @$(NORMAL_UNINSTALL) @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.8*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 8*) ;; \ *) ext='8' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \ rm -f "$(DESTDIR)$(man8dir)/$$inst"; \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) installdirs: for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am distclean: distclean-am -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags dvi: dvi-am dvi-am: html: html-am info: info-am info-am: install-data-am: install-man install-dvi: install-dvi-am install-exec-am: install-sbinPROGRAMS install-html: install-html-am install-info: install-info-am install-man: install-man8 install-pdf: install-pdf-am install-ps: install-ps-am installcheck-am: maintainer-clean: maintainer-clean-am -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-compile mostlyclean-generic pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-man uninstall-sbinPROGRAMS uninstall-man: uninstall-man8 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ clean-sbinPROGRAMS ctags distclean distclean-compile \ distclean-generic distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ install-exec-am install-html install-html-am install-info \ install-info-am install-man install-man8 install-pdf \ install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic \ maintainer-clean-local mostlyclean mostlyclean-compile \ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-man uninstall-man8 \ uninstall-sbinPROGRAMS maintainer-clean-local: -rm -f Makefile.in # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: amavisd-milter-1.5.0/amavisd-milter/amavisd.c000644 001751 001751 00000016567 11101735512 021112 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: amavisd.c,v 1.18 2008/10/29 01:24:26 reho Exp $ */ #include "amavisd-milter.h" #include /* ** AMAVISD_GROW_AMABUF - Reallocate amavisd communication buffer */ static void * amavisd_grow_amabuf(struct mlfiCtx *mlfi, char *b) { char *amabuf; size_t buflen, bufpos; /* Calculate buffer pointer position */ if (b == NULL) { bufpos = 0; } else { bufpos = b - mlfi->mlfi_amabuf; } /* Calculate new buffer size */ buflen = mlfi->mlfi_amabuf_length + AMABUFCHUNK; if (mlfi->mlfi_amabuf_length < MAXAMABUF && buflen >= MAXAMABUF) { logqidmsg(mlfi, LOG_WARNING, "maximum size of amavisd communication buffer was reached"); buflen = MAXAMABUF; } else if (buflen > MAXAMABUF) { logqidmsg(mlfi, LOG_ERR, "amavisd communication buffer is too big (%lu)", (unsigned long)buflen); errno = EOVERFLOW; return NULL; } /* Reallocate buffer */ if ((amabuf = realloc(mlfi->mlfi_amabuf, buflen)) == NULL) { logqidmsg(mlfi, LOG_ERR, "could not reallocate amavisd communication buffer (%lu)", (unsigned long)buflen); return NULL; } mlfi->mlfi_amabuf = amabuf; mlfi->mlfi_amabuf_length = buflen; logqidmsg(mlfi, LOG_DEBUG, "amavisd communication buffer was increased to %lu", (unsigned long)buflen); return amabuf + bufpos; } /* ** AMAVISD_CONNECT - Connect to amavisd socket */ int amavisd_connect(struct mlfiCtx *mlfi, struct sockaddr_un *sock, time_t timeout) { int i; #ifdef HAVE_SEM_TIMEDWAIT struct timespec max_timeout; #endif /* Lock amavisd connection */ if (max_sem != NULL && mlfi->mlfi_max_sem_locked == 0) { #ifdef HAVE_SEM_TIMEDWAIT max_timeout.tv_sec = timeout; max_timeout.tv_nsec = 0; while ((i = sem_timedwait(max_sem, &max_timeout)) != 0 && errno == EINTR) { continue; } #else while ((i = sem_trywait(max_sem)) != 0 && errno == EAGAIN && time(NULL) < timeout) { sleep(1); } #endif if (i == -1) { if (errno != AMAVISD_CONNECT_TIMEDOUT_ERRNO) { logqidmsg(mlfi, LOG_ERR, "could not lock amavisd connections semaphore: %s", strerror(errno)); } return -1; } mlfi->mlfi_max_sem_locked = 1; sem_getvalue(max_sem, &i); logqidmsg(mlfi, LOG_DEBUG, "grab amavisd connection %d", i); } /* Initialize domain socket */ memset(sock, '\0', sizeof(*sock)); sock->sun_family = AF_UNIX; (void) strlcpy(sock->sun_path, amavisd_socket, sizeof(sock->sun_path)); if ((mlfi->mlfi_amasd = socket(PF_UNIX, SOCK_STREAM, 0)) == -1) { logqidmsg(mlfi, LOG_ERR, "could not create amavisd socket %s: %s", amavisd_socket, strerror(errno)); return -1; } /* Connect to amavisd */ if (connect(mlfi->mlfi_amasd, (struct sockaddr *)sock, sizeof(*sock)) == -1) { logqidmsg(mlfi, LOG_ERR, "could not connect to amavisd socket %s: %s", amavisd_socket, strerror(errno)); return -1; } /* Return socket */ logqidmsg(mlfi, LOG_DEBUG, "open amavisd communication socket %s", amavisd_socket); return mlfi->mlfi_amasd; } /* ** AMAVISD_REQUEST - Write request line to amavisd */ int amavisd_request(struct mlfiCtx *mlfi, const char *name, const char *value) { const char *p; char *b = mlfi->mlfi_amabuf; /* Encode request */ if (name != NULL) { p = name; while (*p != '\0') { if (b >= mlfi->mlfi_amabuf + mlfi->mlfi_amabuf_length - 5 && (b = amavisd_grow_amabuf(mlfi, b)) == NULL) { return -1; } if (isalnum(*p) || *p == '-' || *p == '_') { *b++ = *p++; } else { (void) snprintf(b, 4, "%%%02x", *p++); b += 3; } } if (value != NULL) { *b++ = '='; } } if (value != NULL) { p = value; while (*p != '\0') { if (b >= mlfi->mlfi_amabuf + mlfi->mlfi_amabuf_length - 4 && (b = amavisd_grow_amabuf(mlfi, b)) == NULL) { return -1; } if (isalnum(*p) || *p == '-' || *p == '_') { *b++ = *p++; } else { (void) snprintf(b, 4, "%%%02x", *p++); b += 3; } } } *b++ = '\n'; /* Write request to amavisd socket */ return write_sock(mlfi->mlfi_amasd, mlfi->mlfi_amabuf, b - mlfi->mlfi_amabuf, amavisd_timeout); } /* ** AMAVISD_RESPONSE - Read response line from amavisd */ int amavisd_response(struct mlfiCtx *mlfi) { int decode = 0; char *b = mlfi->mlfi_amabuf; char *b2; /* Read response line */ while (read_sock(mlfi->mlfi_amasd, b, 1, amavisd_timeout) > 0) { if (b >= mlfi->mlfi_amabuf + mlfi->mlfi_amabuf_length - 2) { if ((b2 = amavisd_grow_amabuf(mlfi, b)) == NULL) { *(b + 1) = '\0'; return -1; } else { b = b2; } } if (*b == '\n') { *b = '\0'; return 0; } else if (*b == '%') { decode = 1; } else if (decode == 1) { if (isxdigit(*b)) { decode = 2; b++; } else { *(b + 1) = '\0'; errno = EILSEQ; return -1; } } else if (decode == 2) { if (isxdigit(*b)) { *(b + 1) = '\0'; *(b - 1) = (u_char) strtol(b - 1, NULL, 16); decode = 0; } else { *(b + 1) = '\0'; errno = EILSEQ; return -1; } } else if (*b == '\r') { /* Do nothing */ } else { b++; } } /* read_sock failed */ *b = '\0'; return -1; } /* ** AMAVISD_CLOSE - Close amavisd socket */ void amavisd_close(struct mlfiCtx *mlfi) { /* Close amavisd connection */ if (mlfi->mlfi_amasd != -1) { if (close(mlfi->mlfi_amasd) == -1) { logqidmsg(mlfi, LOG_ERR, "could not close amavisd socket %s: %s", mlfi->mlfi_fname, strerror(errno)); } mlfi->mlfi_amasd = -1; logqidmsg(mlfi, LOG_DEBUG, "close amavisd communication socket"); } /* Unlock amavisd connection */ if (mlfi->mlfi_max_sem_locked != 0) { if (sem_post(max_sem) == -1) { logqidmsg(mlfi, LOG_ERR, "%s: could not unlock amavisd connections semaphore: %s", strerror(errno)); } mlfi->mlfi_max_sem_locked = 0; logqidmsg(mlfi, LOG_DEBUG, "got back amavisd connection"); } } amavisd-milter-1.5.0/amavisd-milter/main.c000644 001751 001751 00000032724 11347266664 020426 0ustar00rehoreho000000 000000 /* * Copyright (c) 2005, Petr Rehor . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $Id: main.c,v 1.26 2010/03/14 23:13:56 reho Exp $ */ #include "amavisd-milter.h" #include #include #include /* ** GLOBAL VARIABLES */ int daemonize = 1; int daemonized = 0; int debug_level = LOG_WARNING; int max_conns = 0; int max_wait = 5 * 60; sem_t max_sem_t; sem_t *max_sem = NULL; const char *pid_file = LOCAL_STATE_DIR "/" PACKAGE ".pid"; const char *mlfi_socket = LOCAL_STATE_DIR "/" PACKAGE ".sock"; #ifdef HAVE_SMFI_SETBACKLOG int mlfi_socket_backlog = 0; #endif long mlfi_timeout = 600; const char *amavisd_socket = LOCAL_STATE_DIR "/amavisd.sock"; long amavisd_timeout = 600; int ignore_amavisd_error = 0; const char *working_dir = WORKING_DIR; const char *delivery_care_of = "client"; /* ** USAGE - Print usage info */ static void usage(const char *progname) { (void) fprintf(stdout, "\nUsage: %s [OPTIONS]\n", progname); (void) fprintf(stdout, "Options are:\n"); (void) fprintf(stdout, " -d debug-level Set debug level\n"); (void) fprintf(stdout, " -D delivery Delivery care of server or client\n"); (void) fprintf(stdout, " -f Run in the foreground\n"); (void) fprintf(stdout, " -h Print this page\n"); (void) fprintf(stdout, " -m max-conns Maximum amavisd connections \n"); (void) fprintf(stdout, " -M max-wait Maximum wait for connection in seconds\n"); (void) fprintf(stdout, " -p pidfile Use this pid file\n"); (void) fprintf(stdout, " -P When amavisd fails mail will be passed\n through unchecked\n"); #ifdef HAVE_SMFI_SETBACKLOG (void) fprintf(stdout, " -q backlog Milter communication socket backlog\n"); #endif (void) fprintf(stdout, " -s socket Milter communication socket\n"); (void) fprintf(stdout, " -S socket Amavisd communication socket\n"); (void) fprintf(stdout, " -t timeout Milter connection timeout in seconds\n"); (void) fprintf(stdout, " -T timeout Amavisd connection timeout in seconds\n"); (void) fprintf(stdout, " -v Report the version and exit\n"); (void) fprintf(stdout, " -w directory Set the working directory\n\n"); } /* ** USAGEERR - Print error message, program usage and then exit */ static void usageerr(const char *progname, const char *fmt, ...) { char buf[MAXLOGBUF]; va_list ap; /* Format err message */ va_start(ap, fmt); (void) vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); /* Print error message, program usage and then exit */ (void) fprintf(stderr, "%s: %s\n", progname , buf); usage(progname); exit(EX_USAGE); } /* ** VERSIONINFO - Print program version info */ static void versioninfo(const char *progname) { (void) fprintf(stdout, "%s %s\n", progname, VERSION); } /* ** MAIN - Main program loop */ int main(int argc, char *argv[]) { static const char *args = "d:D:fhm:M:p:Pq:s:S:t:T:vw:"; int c, rstat; char *p; const char *progname, *socket_name; FILE *fp; struct stat st; mode_t save_umask; struct sockaddr_un unix_addr; /* Program name */ p = strrchr(argv[0], '/'); if (p == NULL) { progname = argv[0]; } else { progname = p + 1; } /* Open syslog */ openlog(progname, LOG_PID, LOG_MAIL); /* Process command line options */ while ((c = getopt(argc, argv, args)) != EOF) { switch (c) { case 'd': /* debug level */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } debug_level = (int) strtol(optarg, &p, 10); if (p != NULL && *p != '\0') { usageerr(progname, "debug level is not valid number: %s", optarg); } if (debug_level < 0) { usageerr(progname, "negative debug level: %d", debug_level); } debug_level += LOG_WARNING; break; case 'D': /* delivery mechanism */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } if (strcmp(optarg, "client") != 0 && strcmp(optarg, "server") != 0) { usageerr(progname, "unknown delivery mechanism '%s'", optarg); } delivery_care_of = optarg; break; case 'f': /* run in foreground */ daemonize = 0; break; case '?': /* options parsing error */ (void) fprintf(stderr, "\n"); case 'h': /* help */ usage(progname); exit(EX_OK); break; case 'm': /* maximum amavisd connections */ max_conns = (int) strtol(optarg, &p, 10); if (p != NULL && *p != '\0') { usageerr(progname, "maximum amavisd connections is not valid number: %s", optarg); } if (max_conns < 0) { usageerr(progname, "negative maximum amavisd connections: %d", max_conns); } break; case 'M': /* maximum wait for connection */ max_wait = (int) strtol(optarg, &p, 10); if (p != NULL && *p != '\0') { usageerr(progname, "maximum wait for connection is not valid number: %s", optarg); } if (max_wait < 0) { usageerr(progname, "negative maximum wait for connection: %d", max_wait); } break; case 'p': /* pid file name */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } pid_file = optarg; break; case 'P': /* when amavisd fails mail will be passed */ ignore_amavisd_error = 1; /* through unchecked */ break; #ifdef HAVE_SMFI_SETBACKLOG case 'q': /* milter communication socket backlog */ mlfi_socket_backlog = (int) strtol(optarg, &p, 10); if (p != NULL && *p != '\0') { usageerr(progname, "milter communication socket backlog is not valid number: " "%s", optarg); } if (mlfi_socket_backlog < 0) { usageerr(progname, "negative milter communication socket backlog: %d", mlfi_socket_backlog); } break; #endif case 's': /* milter communication socket */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } if (strlen(optarg) >= sizeof(unix_addr.sun_path) - 1) { usageerr(progname, "milter communication socket name too long: %s", optarg); } mlfi_socket = optarg; break; case 't': /* milter connection timeout */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } mlfi_timeout = (int) strtol(optarg, &p, 10); if (p != NULL && *p != '\0') { usageerr(progname, "milter connection timeout is not valid number: %s", optarg); } if (mlfi_timeout < 0) { usageerr(progname, "negative milter connection timeout: %ld", mlfi_timeout); } break; case 'v': /* version info */ versioninfo(progname); exit(EX_OK); break; case 'w': /* working directory */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } working_dir = optarg; break; case 'S': /* amavisd communication socket */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } if (strlen(optarg) >= sizeof(unix_addr.sun_path) - 1) { usageerr(progname, "amavisd communication socket name too long: %s", optarg); } amavisd_socket = optarg; break; case 'T': /* amavisd connection timeout */ if (optarg == NULL || *optarg == '\0') { usageerr(progname, "option requires an argument -- %c", (char)c); } amavisd_timeout = (int) strtol(optarg, &p, 10); if (p != NULL && *p != '\0') { usageerr(progname, "amavisd connection timeout is not valid number: %s", optarg); } if (amavisd_timeout < 0) { usageerr(progname, "negative amavisd connection timeout: %ld", amavisd_timeout); } break; default: /* unknown option */ usageerr(progname, "illegal option -- %c", (char)c); break; } } /* Create amavisd connections semaphore */ if (max_conns > 0) { if (sem_init(&max_sem_t, 0, max_conns) == -1) { logmsg(LOG_ERR, "could not initialize amavisd connections semaphore: %s", strerror(errno)); exit(EX_SOFTWARE); } else { max_sem = &max_sem_t; } } /* Check permissions on working directory */ /* TODO: traverse working directory path */ if (stat(working_dir, &st) != 0) { logmsg(LOG_ERR, "could not stat() to working directory %s: %s", working_dir, strerror(errno)); exit(EX_SOFTWARE); } if (!S_ISDIR(st.st_mode)) { logmsg(LOG_ERR, "%s is not directory", working_dir); exit(EX_SOFTWARE); } if ((st.st_mode & S_IRWXO) != 0) { logmsg(LOG_ERR, "working directory %s is world accessible", working_dir); exit(EX_SOFTWARE); } /* Configure milter */ socket_name = NULL; if (mlfi_socket[0] == '/') { socket_name = mlfi_socket; } if (! strncmp(mlfi_socket, "unix:", 5)) { socket_name = mlfi_socket + 5; } if (! strncmp(mlfi_socket, "local:", 6)) { socket_name = mlfi_socket + 6; } if (socket_name != NULL && unlink(socket_name) != 0 && errno != ENOENT) { logmsg(LOG_ERR, "could not unlink old milter socket %s: %s", socket_name, strerror(errno)); exit(EX_SOFTWARE); } if (debug_level > LOG_DEBUG && smfi_setdbg(debug_level - LOG_DEBUG) != MI_SUCCESS) { logmsg(LOG_ERR, "could not set milter debug level"); exit(EX_SOFTWARE); } if (mlfi_timeout > 0 && smfi_settimeout(mlfi_timeout) != MI_SUCCESS) { logmsg(LOG_ERR, "could not set milter timeout"); exit(EX_SOFTWARE); } if (smfi_setconn(mlfi_socket) != MI_SUCCESS) { logmsg(LOG_ERR, "could not set milter socket"); exit(EX_SOFTWARE); } if (smfi_register(smfilter) != MI_SUCCESS) { logmsg(LOG_ERR, "could not register milter"); exit(EX_SOFTWARE); } /* Unlink old pid file */ if (pid_file != NULL) { if (unlink(pid_file) != 0 && errno != ENOENT) { logmsg(LOG_WARNING, "could not unlink old pid file %s: %s", pid_file, strerror(errno)); } } /* Run in the background */ if (daemonize) { if (daemon(1, 1) != -1) { daemonized = 1; } else { logmsg(LOG_ERR, "could not fork daemon process: %s", strerror(errno)); exit(EX_OSERR); } } /* Connect to milter socket */ #ifdef HAVE_SMFI_SETBACKLOG if (mlfi_socket_backlog > 0) { if (smfi_setbacklog(mlfi_socket_backlog) != MI_SUCCESS) { logmsg(LOG_WARNING, "could not set milter socket backlog to %d", mlfi_socket_backlog); } } #endif #ifdef HAVE_SMFI_OPENSOCKET if (smfi_opensocket(false) != MI_SUCCESS) { logmsg(LOG_ERR, "could not open milter socket %s", mlfi_socket); exit(EX_SOFTWARE); } #endif /* Greetings message */ logmsg(LOG_WARNING, "starting %s %s on socket %s", progname, VERSION, mlfi_socket); /* Create pid file */ if (pid_file != NULL) { save_umask = umask(022); fp = fopen(pid_file, "w"); if (fp == NULL) { logmsg(LOG_WARNING, "could not create pid file %s: %s", pid_file, strerror(errno)); } else { (void) fprintf(fp, "%ld\n", (long) getpid()); if (ferror(fp)) { logmsg(LOG_WARNING, "could not write to pid file %s: %s", pid_file, strerror(errno)); clearerr(fp); (void) fclose(fp); } else if (fclose(fp) != 0) { logmsg(LOG_WARNING, "could not close pid file %s: %s", pid_file, strerror(errno)); } } umask(save_umask); } /* Run milter */ if ((rstat = smfi_main()) != MI_SUCCESS) { logmsg(LOG_ERR, "%s failed", progname); } else { logmsg(LOG_WARNING, "stopping %s %s on socket %s", progname, VERSION, mlfi_socket); } /* Unlink pid file */ if (pid_file != NULL) { if (unlink(pid_file) != 0) { logmsg(LOG_WARNING, "could not unlink pid file %s: %s", pid_file, strerror(errno)); } } /* Destroy amavisd connections semaphore */ if (max_sem != NULL && sem_destroy(max_sem) == -1) { logmsg(errno == EBUSY ? LOG_ERR : LOG_WARNING, "%s: could not destroy amavisd connections semaphore: %s", progname, strerror(errno)); } return rstat; }