' header file. The option '-nodtk' can be used as a
workaround. If GNU CC is not installed, it is therefore recommended to
try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put '/usr/ucb' early in your 'PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in '/usr/bin'. So, if you need '/usr/ucb'
in your 'PATH', put it _after_ '/usr/bin'.
On Haiku, software installed for all users goes in '/boot/common',
not '/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features 'configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, 'configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
'--build=TYPE' option. TYPE can either be a short name for the system
type, such as 'sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file 'config.sub' for the possible values of each field. If
'config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option '--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with '--host=TYPE'.
Sharing Defaults
================
If you want to set default values for 'configure' scripts to share,
you can create a site shell script called 'config.site' that gives
default values for variables like 'CC', 'cache_file', and 'prefix'.
'configure' looks for 'PREFIX/share/config.site' if it exists, then
'PREFIX/etc/config.site' if it exists. Or, you can set the
'CONFIG_SITE' environment variable to the location of the site script.
A warning: not all 'configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to 'configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the 'configure' command line, using 'VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified 'gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
Autoconf limitation. Until the limitation is lifted, you can use this
workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
'configure' Invocation
======================
'configure' recognizes the following options to control how it
operates.
'--help'
'-h'
Print a summary of all of the options to 'configure', and exit.
'--help=short'
'--help=recursive'
Print a summary of the options unique to this package's
'configure', and exit. The 'short' variant lists options used only
in the top level, while the 'recursive' variant lists options also
present in any nested packages.
'--version'
'-V'
Print the version of Autoconf used to generate the 'configure'
script, and exit.
'--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally 'config.cache'. FILE defaults to '/dev/null' to
disable caching.
'--config-cache'
'-C'
Alias for '--cache-file=config.cache'.
'--quiet'
'--silent'
'-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to '/dev/null' (any error
messages will still be shown).
'--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
'configure' can determine that directory automatically.
'--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names:: for
more details, including other options available for fine-tuning the
installation locations.
'--no-create'
'-n'
Run the configure checks, but stop before creating any output
files.
'configure' also accepts some other, not widely useful, options. Run
'configure --help' for more details.
librelp-1.11.0/doc/ 0000775 0001750 0001750 00000000000 14354537117 011005 5 0000000 0000000 librelp-1.11.0/doc/Makefile.am 0000644 0001750 0001750 00000000041 13273030644 012742 0000000 0000000 EXTRA_DIST = relp.html gfdl.html
librelp-1.11.0/doc/gfdl.html 0000644 0001750 0001750 00000052440 13273030644 012522 0000000 0000000
GNU Free Documentation License
Version 1.3, 3 November 2008
Copyright © 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other functional and useful document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.
We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you". You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.
The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text.
The "publisher" means any person or entity that distributes copies of the Document to the public.
A section "Entitled XYZ" means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as "Acknowledgements", "Dedications", "Endorsements", or "History".) To "Preserve the Title" of such a section when you modify the Document means that it remains a section "Entitled XYZ" according to this definition.
The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.
You may also lend copies, under the same conditions stated above, and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.
If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:
* A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.
* B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement.
* C. State on the Title page the name of the publisher of the Modified Version, as the publisher.
* D. Preserve all the copyright notices of the Document.
* E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
* F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.
* G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice.
* H. Include an unaltered copy of this License.
* I. Preserve the section Entitled "History", Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
* J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
* K. For any section Entitled "Acknowledgements" or "Dedications", Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.
* L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.
* M. Delete any section Entitled "Endorsements". Such a section may not be included in the Modified Version.
* N. Do not retitle any existing section to be Entitled "Endorsements" or to conflict in title with any Invariant Section.
* O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles.
You may add a section Entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.
You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.
The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.
In the combination, you must combine any sections Entitled "History" in the various original documents, forming one section Entitled "History"; likewise combine any sections Entitled "Acknowledgements", and any sections Entitled "Dedications". You must delete all sections Entitled "Endorsements".
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.
You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an "aggregate" if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included in an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.
If a section in the Document is Entitled "Acknowledgements", "Dedications", or "History", the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, or distribute it is void, and will automatically terminate your rights under this License.
However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, receipt of a copy of some or all of the same material does not give you any rights to use it.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.
Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. If the Document specifies that a proxy can decide which future versions of this License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Document.
11. RELICENSING
"Massive Multiauthor Collaboration Site" (or "MMC Site") means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A "Massive Multiauthor Collaboration" (or "MMC") contained in the site means any set of copyrightable works thus published on the MMC site.
"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 license published by Creative Commons Corporation, a not-for-profit corporation with a principal place of business in San Francisco, California, as well as future copyleft versions of that license published by that same organization.
"Incorporate" means to publish or republish a Document, in whole or in part, as part of another Document.
An MMC is "eligible for relicensing" if it is licensed under this License, and if all works that were first published under this License somewhere other than this MMC, and subsequently incorporated in whole or in part into the MMC, (1) had no cover texts or invariant sections, and (2) were thus incorporated prior to November 1, 2008.
The operator of an MMC Site may republish an MMC contained in the site under CC-BY-SA on the same site at any time before August 1, 2009, provided the MMC is eligible for relicensing.
librelp-1.11.0/doc/relp.html 0000644 0001750 0001750 00000046537 13273030644 012562 0000000 0000000
RELP - The Reliable Event Logging Protocol (Specification)
RELP - The Reliable Event Logging Protocol
This is the specification for the reliable event logging
protocol, called "RELP".
Version: 0.0.1
Date: 2008-03-19
Author: Rainer
Gerhards
Copyright (C) 2008 by Rainer Gerhards and Adiscon GmbH.
Released under the terms of the GNU FDL.
DESCRIPTION OF THE RELP PROTOCOL
Relp uses a client-server model with (mostly fixed roles. The
initiating part of the
connection is called the client, the listening part the server. In the
state
diagrams below, C stand for client and S for server.
Relp employs a command-response model, that is the client
issues commands to
which the server responds. To facilitate full-duplex communication,
multiple
commands can be issued at the same time, thus multiple responses may be
outstanding at a given time. The server may reply in any order. To
conserve
ressources, the number of outstanding commands is limited by a window.
Each
command is assigned a (relative) unique, monotonically increasing ID
(called the
"transaction number" or txnr for short. Each
response must include that ID. Responses must be sent by the server in
the exact same order as commands where received.
There is one potential issue with this communications model:
In it, the server is able to respond to the client only in form or a
response package. It is not capable of issuing a command itself. During
normal operations, this does not pose any problem. However, if the
server is shut down, there is no way for it to tell the client of its
shutdown intension, especially if the client does not send any data at
that moment. The same situation arises when the server timeouts a
sessions where the client has not sent any data for an extended period
of time (this probably is a good thing to conserve server ressources).
Of course, an obvious answer to that need is that the server
simply closes the connection after having sent all responses (or all
that it is still capable of). The client will notice the closed
connection at latest when it tries to send new commands. However, it
may be worth considering an alternate mode where the server can issue
commands to the client. One potential way to do this would be to
reserve a specific txnr (0, for example) for this use. That txnr is
only to be used by the server and only to send "out-of-band" commands.
These commands must not be acknowledged by the client, because that
would complicate the protocol more than useful for this case. So
out-of-band-commands have a "hint" status - they hint the client about
something, but if they do not arrive at the client, nothing fatal
should happen. The ultimate session closure indication would still be
the tcp session close. [Please see the "High Latency Environment" use
case below for some implications this hinting process may have].
For the time being, it has been decided that such out of band
hints be not supported.
A command and its response is called a relp transaction. A
response must always carry the same txnr as the original command.
If something goes really wrong, both the client and the server
may terminate
the TCP connection at any time. Any outstanding commands are considered
to
have been unsuccessful in this case.
ERROR HANDLING
If something goes wrong (e.g. invalid framing), the peer that detects
the problem
closes the underlying (TCP) connection. It may send an error/abort
hint, but
MUST NOT wait for its response. The reasoning for this is that today's
Internet is
not a friendly place. Trying to gracefully resolve communications
problems may
lead to an attack vector. On the other hand, if the problem was of
temporary nature,
it may be cleared up by the connection reset and a new connect. So
aborting errored
connections is considered both secure as well as reasonable efficient.
Note: the ability to send abort/error messages depends on the
decision of out-of-band-hint-commands (see above).
SENDING MESSAGES
Because it is so important, I'd like to point it specifically out:
sending a
message is "just" another RELP command. The reply to that command is
the ACK/NAK
for the message. So every message *is* acknowledged. RELP options
indicate how
"deep" this acknowledge is (once we have implemented that), in the most
extreme
case a RELP client may ask a RELP server to ack only after the message
has been
completely acted upon (e.g. successfully written to database) - but
this is far
away in the future. For now, keep in mind that message loss will always
be detected
because we have app-level acknowledgement.
RELP FRAME
All relp transaction are carried out over a consistent framing.
RELP-FRAME = HEADER DATA TRAILER
DATA = [SP 1*OCTET] ; command-defined data, if DATALEN is 0, no data is present
HEADER = TXNR SP COMMAND SP DATALEN
TXNR = NUMBER ; relp transaction number, monotonically increases, starts at 1
DATALEN = NUMBER
#old:COMMAND = "open" / "syslog" / "close" / "rsp" / "abort" ; max length = 32
COMMAND = 1*32ALPHA
TRAILER = LF ; to detect framing errors and enhance human readibility
ALPHA = letter ; ('a'..'z', 'A'..'Z')
NUMBER = 1*9DIGIT
DIGIT = %d48-57
LF = %d10
SP = %d32
RSP DATA CONTENT:
RSP-HEADER = TXNR SP RSP-CODE [SP HUMANMSG] LF [CMDDATA]
RSP-CODE = 200 / 500 ; 200 is ok, all the rest currently erros
HUAMANMSG = *OCTET ; a human-readble message without LF in it
CMDDATA = *OCTET ; semantics depend on original command
TXNR is as in the relp frame, it is the TXNR of the frame being responded to.
DATALEN is the number of octets in DATA (so the frame length excluding
the length
of HEADER and TRAILER). Please note that the theoretical maximum
(999,999,999 octets)
is in (almost?) all cases unsuitable for actual message transfer. Thus,
the actual
maximum data length is negotiated during session setup. In relp version
1, it is
always 128K. In later versions, it shall be operator-configurable.
TXNR 0 is reserved for hint commands. A RELP
connection start with TXNR 1. Note that TXNR montonically increases but
is latched at 999,999,999. After that TXNR, the next TXNR is
1.
COMMAND SEMANTICS
Command can be either regular commands or hints. Regular commands are
responded to by a rsp package. They are transmitted on txnrs of 1 or
above. Hints are commands that are not being responded. They are always
transmitted with a txnr of zero. Regular commands can only be issued by
the client. Hints can be issued both by the client and the server.
"Command" "rsp"
This is not a real command but a response to a client-issued command.
The TXNR MUST match the client's
command
TXNR. The data part contains RSP-HEADER as defined above. It is a
response code,
optionally followed by a space and additional data (depending on the
client's command). Return state values are: 200 - OK, 500 - error.
The ABNF for a "rsp"'s data portion is as follows:
RSPDATA = STATUS SP HUMAN-TEXT [LF DATA]
STATUS = 3DIGIT
HUMAN-TEXT = *80ALPHA
DATA = 1*OCTET
Command "open"
Opens a connection to the server. Must include offers inside the
data, at a minimum the "relp_version" offer. Offers
provide information about services supported by the client.
When the server receives an open, it parses the offers, checks
what it itself supports
and provides those offers that it accepts in the "rsp". The server may
send a "rsp" with an empty offer part in case it doesn't like any of
the offers. To establish a session, a "relp_version" offer MUST be
included in the response. If it is not, the client MUST close the
connection.
When the client receives the "rsp", it checks the servers
offers and finally selects
those that should be used during the session. Please note that this
doesn't imply the
client selects e.g. security strength. To require a specific security
strength, the
server must be configured to offer only those options back to the
client that it is
happy to accept. So the client can only select from those. As such,
even though the
client makes the final feature selection, the server is dictating what
needs to be used.
Note that the connection is only ready AFTER the client has
received the "open" response.
Command "close"
Closes a connection to the server. Once the client has sent a "close"
command, it must not transmit any other command over the session. When
the server's rsp answer is received, the client must close the
connection.
Hint Command "serverclose"
This
hint SHOULD be sent by the server before it closes a RELP connection.
It advised the client that the server has closed the connection. The
client SHOULD use this knowledge to close the connection on the
client-side, too. Please note that this is a hint, and as such
transferred with a TXNR of 0 and without any response from the client.
Note that the client can not ask the server to defer closing of the
connection. A client MUST correctly process a server-closed connection
even if the server does not send a "serverclose" hint. In thus case, it
must rely on the transport layer connection status. The primary utility
of "serverclose" is to enable the client to quickly detect a
server-closed connection, clean up ressources and go into termination
(or recovery code).Command "starttls"
Does the same thing as ESMTP STARTTLS: switches the connection
to TLS mode.
Command "syslog"
This command is used to transmit a syslog message, which (in syslog
message format) is contained within the commands data portion.
OFFERS
During session setup, "offers" are exchange between client and server.
An "offer" describes
a specific feature or operation mode. Always present must be the
"relp_version" offer which
tells the other side which version of relp is in use.
ABNF for offer strings
OFFER = LF FEATURENAME ["=" VALUE *("," VALUE)]
FEATURENAME = *32OCTET
VALUE = *255OCTET
Currently defined values:
FEATURENAME VALUE
relp_version 1 (this specification)
relp_version
This offer describes the protocol version. It MUST be provided
in the
open command. It has one parameter, the numerical version id. The
intial version is 1. There also exists an experimental version 0, which
shall not be used in practice.
commands
This offer describes which commands are supported by the
remote peer. Command that must be specified to drive the RELP protocol
itself (e.g. "open", "close", "rsp") MUST NOT be specified. Optional
commands must be specified. There may be multiple commands specified.
Sample: commands=syslog,eventlog (eventlog is a hypothetical,
not yet known command).
Please note that new commands may be specified outside of the
relp specification. Also note that if the server response does not
include the command the client is interested in, this command MUST NOT
be used. The client may then either resort to another, less featured
supported command or may terminate the relp connection.
relp_software
This offer describes the software (library) that is processing
the relp
protocol. It is an optional offer. The idea is that when each peer
knows which software on the other peer is handling the protocol, it may
be able to work-around some known software issues. The "relp_software"
has two parameters, the first one being the name of the software as it
calls itself, the second one the version as it calls itself and the
third one being an URL where information about this software may be
found. It is suggested that all three parameters are given, but only
the first one MUST actually be provided.
STATE DIAGRAMS
... detailling some communications scenarios:
Session Startup:
C S
cmd: "open", data: offer -----> (selects supported offers)
(selects offers to use) <----- cmd: "rsp", data "accepted offers"
... transmission channel is ready to use ....
Message Transmission
C S
cmd: "syslog", data: syslogmsg -----> (processes message)
(indicates syslog as processed) <----- cmd: "rsp", data OK/Error
Session Termination
C S
cmd: "close", data: none? -----> (processes termination request)
(terminates session) <----- cmd: "rsp", data OK/Error
(terminates session)
SECURITY CONSIDERATIONS
Window Size
A very large window can be abused for denial of service attacks.
Maximum DATALEN
A too-large DATALEN can be absued for denial of service attacks.
Use Cases
These uses cases are not really a part of the
specification. I have added them to provide some insight into
implementation specifics. These use cases may be removed (or moved to
another part of the doc set) some time in the future. In the mean time,
the serve a valuable purpose when thinking about protocol features.
Server Session Closure with a Hibernated Client
I define this use case in support of rsyslog and other
possible clients which try to reduce ressource consumption.
Rsyslog utilizes highly threaded design, among others to take advantage
of multicore-machines. On
the other hand, it conserves resources by only running as many worker
threads as actually needed. So if there is no traffic, it may even be
running no workers at all. The RELP client will be implemented as an
output
plugin and will be executed on a worker thread. So in low-traffic
cases, the RELP client kind of hibernates, maybe even for hours (if no
new message is scheduled for transmission).
In this use case, I examine a typical scenario in a
low-message volume case. Here, the client is asked to transmit a
message every now and than, at a pace of at most one message every few
seconds. It may also happen that no message is to be sent for several
minutes or even hours. Such a scenario is not as extreme as it sounds -
it may, for example, to be used for error notifications, which
hopefully happen very infrequently.
In this scenario, the client sends a command, but will usually
not receive an immediate response, because client processing is already
terminated when the server sends the response packet. Thus, the tcp
stacks receive buffer buffers the server's response until the client
has another message to send. Then, the client first checks for any
outstanding responses, processes them and then send the new message. It
is expected that in this scenario, each client invokation will process
the past response and send a new packet. The response to that packet
will not be processed by the invocation that sent the command but by
the next one. So we always have one outstanding response inside the OS
buffers. Now consider the server is shutting down the connection due to
timeout or due to the fact that it needs to shutdown itself (maybe even
on an urgent case, like power failure - the point is it can not wait).
On next client invokation, the client finds an outstanding response and
processes it. Then, it tries to send a new command. That will fail,
because the connection has been terminated. The usual session recovery
logic is used to restablish the connection when the server is back
online. The command in question is transferred after session
re-establishment.
High Latency Environment
We have a high latency environment that is otherwise quite
reliable
(satellite link). We have a high traffic load. To cover this, a large
transmission
window has been selected (let's say 1000 messages). Now the client
sends a burst of messages but then has nothing to do and
falls
asleep. Then, the server starts sending acks. These acks are not taken
off the wire by the client (as it is inactive - rsyslog case).
Eventually, the tcp window fills. Thus the server can no longer send
acks. This does not immediately pose any problems, as the server adds
the ack frames to its internal send queue.
If the client comes
out of hibernation, it receives all previous sent frames, freeing the
server's tcp send window. Thus, the server can continue to send data
from its send queue (and drain it). The client, having received the
server's acks, will not stall because its own RELP window has been
cleared by the acks.
The situation is more complicated if
the server intends to shut down while the client is in hibernation. To
do so, the server usually sends a "adviseclose" command followed by a
"close" command. However, neither of these commands can be sent because
the client does not take them off the wire. The close operation is now
stalled. The only option left to the server is an unconditional
termination of the session. While everything that has already been sent
to the client will be picked up by it when it comes out of hibernation,
anything left in the server's send queue will be lost in this case. As
such, acks are potentially lost. This will lead to message duplication
as the client assumes that the frames unacked at time of force-close
where not processed (there is no other safe assumption). Consequently,
the client will re-send these frames in the next session.
A cure
to this situation is to have the client concurrently listen to server
requests, e.g. by running a receiver on a separate thread. The RELP
protocol does not demand this behaviour. However, it can be used to
solve the above server stall. Let's assume this is being done. Do we
now have a sufficient guarantee that the server does not stall? Under
normal conditions, it is a safe assumption that the client will be able
to receive all frames sent by the server. So a buildup of server queues
should, if at all, happen only for a short instant. However, if
something goes wrong on the transmission line (especially in
high-latency cases), there may be a somewhat extended period of time in
which the server can not send acks (but only in a magnitude of a few
seconds at most). If the server intends to shutdown during such a
period, a short timeout may enable it to avoid a fore-shutdown.
However, there are still cases thinkable where a force shutdown may be
required. These are deemed to be highly unlikely.
It is the
protocol implementer's choice if the slight less chance of a server
force-shutdown justifies the addition of a background thread to a
program that otherwise doesn't need one. From a protocol point of view,
a force-shutdown is a valid operation. Also, while it causes potential
message duplication, it can not cause message loss.
Feedback and Discussion
Feedback on this document and the RELP protocol is
appreciated. The RELP
mailing list is probably a good place to provide it.
Questions are also happily accepted.
Copyright
Copyright (C) 2008, 2009 Rainer Gerhards and Adiscon.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
A copy of the license can be obtained from http://www.gnu.org/copyleft/fdl.html and is also included in the license file (if there is any difference in those two, the one contained in the license file is the one that this work is licensed under).
librelp-1.11.0/doc/Makefile.in 0000664 0001750 0001750 00000030603 14354536565 013002 0000000 0000000 # Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2018 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
GNUTLS_LIBS = @GNUTLS_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
OPENSSL_LIBS = @OPENSSL_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SOL_LIBS = @SOL_LIBS@
STRIP = @STRIP@
VALGRIND = @VALGRIND@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WARN_LDFLAGS = @WARN_LDFLAGS@
WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
rt_libs = @rt_libs@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
EXTRA_DIST = relp.html gfdl.html
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am:
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
cscopelist-am ctags-am distclean distclean-generic \
distclean-libtool distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags-am uninstall uninstall-am
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
librelp-1.11.0/configure.ac 0000664 0001750 0001750 00000021164 14354536534 012454 0000000 0000000 # -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.
AC_PREREQ(2.61)
AC_INIT([librelp], [1.11.0], [rgerhards@adiscon.com])
# change to the one below if Travis has a timeout
#AM_INIT_AUTOMAKE([subdir-objects serial-tests])
AM_INIT_AUTOMAKE([subdir-objects])
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
AC_CONFIG_SRCDIR([src/relp.c])
AC_CONFIG_HEADER([config.h])
AC_CONFIG_MACRO_DIR([m4])
echo HOST: ${host}
case "${host}" in
*-*-linux*)
AC_DEFINE([OS_LINUX], [1], [Indicator for a Linux OS])
os_type="linux"
;;
*-*-*darwin*|*-*-dragonfly*|*-*-freebsd*|*-*-netbsd*|*-*-openbsd*)
AC_DEFINE([OS_BSD], [1], [Indicator for a BSD OS])
os_type="bsd"
;;
*-apple-*)
AC_DEFINE([OS_APPLE], [1], [Indicator for APPLE OS])
os_type="apple"
;;
*-*-kfreebsd*)
# kernel is FreeBSD, but userspace is glibc - i.e. like linux
# do not DEFINE OS_BSD
os_type="bsd"
;;
*-*-solaris*)
os_type="solaris"
AC_DEFINE([OS_SOLARIS], [1], [Indicator for a Solaris OS])
AC_DEFINE([_POSIX_PTHREAD_SEMANTICS], [1], [Use POSIX pthread semantics])
AC_DEFINE([_XOPEN_SOURCE], [600], [Use X/Open CAE Specification])
CPPFLAGS="-std=c99 $CPPFLAGS"
AM_CFLAGS="-std=c99 $CFLAGS"
SOL_LIBS="-lsocket -lnsl"
# Solaris libuuid does not ship with a pkgconfig file so override the appropriate
# variables (but only if they have not been set by the user).
LIBUUID_CFLAGS=${LIBUUID_CFLAGS:= }
LIBUUID_LIBS=${LIBUUID_LIBS:=-luuid}
AC_SUBST(SOL_LIBS)
;;
*-*-aix*)
os_type="aix"
AC_DEFINE([OS_AIX], [1], [Indicator for a AIX OS])
AM_CFLAGS="$CFLAGS -D_LINUX_SOURCE_COMPAT"
LDFLAGS="$LDFLAGS -brtl"
;;
esac
AM_CONDITIONAL(OS_APPLE, test x$os_type == xapple)
AM_CONDITIONAL(xOS_LINUX, test x$os_type == xlinux)
AM_CONDITIONAL(OS_LINUX, test x$os_type == xlinux)
AM_CONDITIONAL(OS_SOLARIS, test x$os_type == xsolaris)
AM_CONDITIONAL(OS_AIX, test "x$os_type" = "xaix")
AM_PATH_PYTHON(,, [:])
# Checks for programs.
AC_PROG_CC
AC_PROG_CC_C99
AM_PROG_CC_C_O
if test "$GCC" = "yes"
then AM_CFLAGS="$CFLAGS -W -Wall -Wformat-security -Wshadow -Wcast-align -Wpointer-arith -Wmissing-format-attribute -g"
fi
AC_PROG_LIBTOOL
PKG_PROG_PKG_CONFIG
if test "$GCC" = "yes"
then
m4_ifdef([AX_IS_RELEASE], [
AX_IS_RELEASE([git-directory])
m4_ifdef([AX_COMPILER_FLAGS], [
AX_COMPILER_FLAGS(,,,,[-pedantic -Wunused-parameter -Wmissing-field-initializers])
# unfortunately, AX_COMPILER_FLAGS does not provide a way to override
# the default -Wno-error=warning" flags. So we do this via sed below.
# Note: we *really* want to have this error out during CI testing!
# -Wdeclaration-after-statement in gcc always generates a warning,
# even in c99 mode. So we need to unset it.
# rgerhards, 2018-05-09
WARN_CFLAGS="$(echo "$WARN_CFLAGS" | sed s/-Wno-error=/-W/g | sed s/-W.*declaration-after-statement//g)"
], [
AM_CFLAGS="$CFLAGS -W -Wall -Wformat-security -Wshadow -Wcast-align -Wpointer-arith -Wmissing-format-attribute -g"
AC_MSG_WARN([missing AX_COMPILER_FLAGS macro, not using it])
])
], [
AM_CFLAGS="$CFLAGS -W -Wall -Wformat-security -Wshadow -Wcast-align -Wpointer-arith -Wmissing-format-attribute -g"
AC_MSG_WARN([missing AX_IS_RELEASE macro, not using AX_COMPILER_FLAGS macro because of this])
])
else
AC_MSG_WARN([compiler is not GCC or close compatible, not using ax_compiler_flags because of this (CC=$CC)])
fi
# Checks for libraries.
save_LIBS=$LIBS
LIBS=
AC_SEARCH_LIBS(clock_gettime, rt)
rt_libs=$LIBS
LIBS=$save_LIBS
AC_SUBST(rt_libs)
# Checks for header files.
AC_HEADER_STDC
AC_CHECK_HEADERS([sys/epoll.h])
# Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
AC_TYPE_SIZE_T
#AC_HEADER_TIME
#AC_STRUCT_TM
AC_CHECK_MEMBERS([struct sockaddr.sa_len],,,[$sa_includes])
# Checks for library functions.
AC_FUNC_SELECT_ARGTYPES
AC_FUNC_STRERROR_R
AC_TYPE_SIGNAL
AC_CHECK_FUNCS([strerror_r strdup strndup epoll_create epoll_create1])
# enable TLS (may not be possible on platforms with too-old GnuTLS)
AC_ARG_ENABLE(tls,
[AS_HELP_STRING([--enable-tls],[Enable TLS support @<:@default=yes@:>@])],
[case "${enableval}" in
yes) enable_tls="yes" ;;
no) enable_tls="no" ;;
*) AC_MSG_ERROR(bad value ${enableval} for --enable-tls) ;;
esac],
[enable_tls="yes"]
)
# enable Openssl TLS
AC_ARG_ENABLE(tls-openssl,
[AS_HELP_STRING([--enable-tls-openssl],[Enable OpenSSL TLS support @<:@default=yes@:>@])],
[case "${enableval}" in
yes) enable_tls_openssl="yes" ;;
no) enable_tls_openssl="no" ;;
*) AC_MSG_ERROR(bad value ${enableval} for --enable-tls-openssl) ;;
esac],
[enable_tls_openssl="yes"]
)
if test "$enable_tls_openssl" = "yes"; then
PKG_CHECK_MODULES(OPENSSL, openssl)
AC_DEFINE([ENABLE_TLS_OPENSSL], [1], [Indicator that openssl is present])
enable_tls_generic="yes"
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $OPENSSL_CFLAGS"
save_LIBS="$LIBS"
LIBS="$LIBS $OPENSSL_LIBS"
fi
AM_CONDITIONAL([ENABLE_TLS_OPENSSL], [test "$enable_tls_openssl" = "yes"])
if test "$enable_tls" = "yes"; then
PKG_CHECK_MODULES(GNUTLS, gnutls >= 2.0.0)
AC_DEFINE(ENABLE_TLS, 1, [Defined if TLS support is enabled])
enable_tls_generic="yes"
# Check if we have support for proper cert validation
AC_MSG_CHECKING(if we have gnutls_certificate_set_verify_function)
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $GNUTLS_CFLAGS"
save_LIBS="$LIBS"
LIBS="$LIBS $GNUTLS_LIBS"
AC_TRY_LINK(
[
#include
#include
], [
gnutls_certificate_set_verify_function(NULL, NULL);
],[
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_GNUTLS_CERTIFICATE_SET_VERIFY_FUNCTION, 1, [do we have gnutls_certificate_set_verify_function])
have_gnutls_certificate_set_verify_function=yes
],[
AC_MSG_RESULT(no; authentication disabled)
have_gnutls_certificate_set_verify_function=no
]
)
CFLAGS="$save_CFLAGS"
LIBS="$save_LIBS"
fi
AM_CONDITIONAL(ENABLE_TLS, test "$enable_tls" = "yes")
AM_CONDITIONAL([ENABLE_TLS_GENERIC], [test "$enable_tls_generic" = "yes"])
if test "$enable_tls_generic" = "yes"; then
AC_DEFINE(WITH_TLS, 1, [Defined if TLS support is enabled])
fi
# enable Openssl TLS
AC_ARG_ENABLE(tls-openssl,
[AS_HELP_STRING([--enable-tls-openssl],[Enable OpenSSL TLS support @<:@default=yes@:>@])],
[case "${enableval}" in
yes) enable_tls_openssl="yes" ;;
no) enable_tls_openssl="no" ;;
*) AC_MSG_ERROR(bad value ${enableval} for --enable-tls-openssl) ;;
esac],
[enable_tls_openssl="no"]
)
if test "$enable_tls_openssl" = "yes"; then
PKG_CHECK_MODULES(OPENSSL, openssl)
AC_DEFINE([ENABLE_TLS_OPENSSL], [1], [Indicator that openssl is present])
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $OPENSSL_CFLAGS"
save_LIBS="$LIBS"
LIBS="$LIBS $OPENSSL_LIBS"
fi
AM_CONDITIONAL(ENABLE_TLS_OPENSSL, test x$enable_tls_openssl = xyes)
# debug mode settings
AC_ARG_ENABLE(debug,
[AS_HELP_STRING([--enable-debug],[Enable debug mode @<:@default=no@:>@])],
[case "${enableval}" in
yes) enable_debug="yes" ;;
no) enable_debug="no" ;;
*) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;;
esac],
[enable_debug="no"]
)
if test "$enable_debug" = "yes"; then
AC_DEFINE(DEBUG, 1, [Defined if debug mode is enabled (it is easier to check in the code).])
fi
if test "$enable_debug" = "no"; then
AC_DEFINE(NDEBUG, 1, [Defined if debug mode is disabled.])
fi
# valgrind
AC_ARG_ENABLE(valgrind,
[AS_HELP_STRING([--enable-valgrind],[Enable valgrind tests@<:@default=yes@:>@])],
[case "${enableval}" in
yes) enable_valgrind="yes" ;;
no) enable_valgrind="no" ;;
*) AC_MSG_ERROR(bad value ${enableval} for --enable-valgrind) ;;
esac],
[enable_valgrind="yes"]
)
if test "$enable_valgrind" = "yes"; then
AC_CHECK_PROG(VALGRIND, [valgrind], [valgrind], [no])
fi
AM_CONDITIONAL([HAVE_VALGRIND], test "$enable_valgrind" == "yes")
AC_CONFIG_FILES([Makefile \
relp.pc \
doc/Makefile \
tests/set-envvars \
tests/Makefile \
src/Makefile])
AC_OUTPUT
echo "*****************************************************"
echo "librelp will be compiled with the following settings:"
echo
echo "run valgrind in testbench: $enable_valgrind"
echo "Debug mode enabled: $enable_debug"
echo "GNUTLS enabled: $enable_tls"
echo "GNUTLS authentication supported: $have_gnutls_certificate_set_verify_function"
echo "OPENSSL enabled: $enable_tls_openssl"
echo "generic TLS tests enabled: $enable_tls_generic"
librelp-1.11.0/Makefile.in 0000664 0001750 0001750 00000067703 14354536565 012250 0000000 0000000 # Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2018 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = relp.pc
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
DATA = $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DIST_SUBDIRS = $(SUBDIRS)
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(srcdir)/relp.pc.in AUTHORS COPYING ChangeLog INSTALL NEWS \
README compile config.guess config.sub install-sh ltmain.sh \
missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
GNUTLS_LIBS = @GNUTLS_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
OPENSSL_LIBS = @OPENSSL_LIBS@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SOL_LIBS = @SOL_LIBS@
STRIP = @STRIP@
VALGRIND = @VALGRIND@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
WARN_LDFLAGS = @WARN_LDFLAGS@
WARN_SCANNERFLAGS = @WARN_SCANNERFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
rt_libs = @rt_libs@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
ACLOCAL_AMFLAGS = -I m4
SUBDIRS = src doc tests
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = relp.pc
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
relp.pc: $(top_builddir)/config.status $(srcdir)/relp.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA) config.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-pkgconfigDATA
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-pkgconfigDATA
.MAKE: $(am__recursive_targets) all install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
dist-xz dist-zip distcheck distclean distclean-generic \
distclean-hdr distclean-libtool distclean-tags distcleancheck \
distdir distuninstallcheck dvi dvi-am html html-am info \
info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-pkgconfigDATA \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-pkgconfigDATA
.PRECIOUS: Makefile
# Note: version-info is set in ./src/Makefile.am!
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
librelp-1.11.0/compile 0000755 0001750 0001750 00000016327 14354536565 011553 0000000 0000000 #! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2018-03-07.03; # UTC
# Copyright (C) 1999-2018 Free Software Foundation, Inc.
# Written by Tom Tromey .
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to or send patches to
# .
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to .
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
librelp-1.11.0/configure 0000775 0001750 0001750 00002001616 14354536564 012102 0000000 0000000 #! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.69 for librelp 1.11.0.
#
# Report bugs to .
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## -------------------- ##
## M4sh Initialization. ##
## -------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
as_nl='
'
export as_nl
# Printing a long string crashes Solaris 7 /usr/bin/printf.
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
# Prefer a ksh shell builtin over an external printf program on Solaris,
# but without wasting forks for bash or zsh.
if test -z "$BASH_VERSION$ZSH_VERSION" \
&& (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='print -r --'
as_echo_n='print -rn --'
elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
as_echo_n='/usr/ucb/echo -n'
else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
case $arg in #(
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
esac;
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
'
export as_echo_n_body
as_echo_n='sh -c $as_echo_n_body as_echo'
fi
export as_echo_body
as_echo='sh -c $as_echo_body as_echo'
fi
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
PATH_SEPARATOR=:
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
PATH_SEPARATOR=';'
}
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
exit 1
fi
# Unset variables that we do not need and which cause bugs (e.g. in
# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
# suppresses any "Segmentation fault" message there. '((' could
# trigger a bug in pdksh 5.2.14.
for as_var in BASH_ENV ENV MAIL MAILPATH
do eval test x\${$as_var+set} = xset \
&& ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
LC_ALL=C
export LC_ALL
LANGUAGE=C
export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
# Use a proper internal environment variable to ensure we don't fall
# into an infinite loop, continuously re-executing ourselves.
if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
_as_can_reexec=no; export _as_can_reexec;
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
as_fn_exit 255
fi
# We don't want this to propagate to other subprocesses.
{ _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
# is contrary to our usage. Disable this feature.
alias -g '\${1+\"\$@\"}'='\"\$@\"'
setopt NO_GLOB_SUBST
else
case \`(set -o) 2>/dev/null\` in #(
*posix*) :
set -o posix ;; #(
*) :
;;
esac
fi
"
as_required="as_fn_return () { (exit \$1); }
as_fn_success () { as_fn_return 0; }
as_fn_failure () { as_fn_return 1; }
as_fn_ret_success () { return 0; }
as_fn_ret_failure () { return 1; }
exitcode=0
as_fn_success || { exitcode=1; echo as_fn_success failed.; }
as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
else
exitcode=1; echo positional parameters were not saved.
fi
test x\$exitcode = x0 || exit 1
test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
|| test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
test \$(( 1 + 1 )) = 2 || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
else
as_have_required=no
fi
if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
as_found=false
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
as_found=:
case $as_dir in #(
/*)
for as_base in sh bash ksh sh5; do
# Try only shells that exist, to save several forks.
as_shell=$as_dir/$as_base
if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
{ $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
CONFIG_SHELL=$as_shell as_have_required=yes
if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
break 2
fi
fi
done;;
esac
as_found=false
done
$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
{ $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
CONFIG_SHELL=$SHELL as_have_required=yes
fi; }
IFS=$as_save_IFS
if test "x$CONFIG_SHELL" != x; then :
export CONFIG_SHELL
# We cannot yet assume a decent shell, so we have to provide a
# neutralization value for shells without unset; and this also
# works around shells that cannot unset nonexistent variables.
# Preserve -v and -x to the replacement shell.
BASH_ENV=/dev/null
ENV=/dev/null
(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
case $- in # ((((
*v*x* | *x*v* ) as_opts=-vx ;;
*v* ) as_opts=-v ;;
*x* ) as_opts=-x ;;
* ) as_opts= ;;
esac
exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
# Admittedly, this is quite paranoid, since all the known shells bail
# out after a failed `exec'.
$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
exit 255
fi
if test x$as_have_required = xno; then :
$as_echo "$0: This script requires a shell more modern than all"
$as_echo "$0: the shells that I found on your system."
if test x${ZSH_VERSION+set} = xset ; then
$as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
$as_echo "$0: be upgraded to zsh 4.3.4 or later."
else
$as_echo "$0: Please tell bug-autoconf@gnu.org and
$0: rgerhards@adiscon.com about your system, including any
$0: error possibly output before this message. Then install
$0: a modern shell, or manually run the script under such a
$0: shell if you do have one."
fi
exit 1
fi
fi
fi
SHELL=${CONFIG_SHELL-/bin/sh}
export SHELL
# Unset more variables known to interfere with behavior of common tools.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
## --------------------- ##
## M4sh Shell Functions. ##
## --------------------- ##
# as_fn_unset VAR
# ---------------
# Portably unset VAR.
as_fn_unset ()
{
{ eval $1=; unset $1;}
}
as_unset=as_fn_unset
# as_fn_set_status STATUS
# -----------------------
# Set $? to STATUS, without forking.
as_fn_set_status ()
{
return $1
} # as_fn_set_status
# as_fn_exit STATUS
# -----------------
# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
as_fn_exit ()
{
set +e
as_fn_set_status $1
exit $1
} # as_fn_exit
# as_fn_mkdir_p
# -------------
# Create "$as_dir" as a directory, including parents if necessary.
as_fn_mkdir_p ()
{
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || eval $as_mkdir_p || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
# as_fn_executable_p FILE
# -----------------------
# Test if FILE is an executable regular file.
as_fn_executable_p ()
{
test -f "$1" && test -x "$1"
} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
# advantage of any shell optimizations that allow amortized linear growth over
# repeated appends, instead of the typical quadratic growth present in naive
# implementations.
if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
eval 'as_fn_append ()
{
eval $1+=\$2
}'
else
as_fn_append ()
{
eval $1=\$$1\$2
}
fi # as_fn_append
# as_fn_arith ARG...
# ------------------
# Perform arithmetic evaluation on the ARGs, and store the result in the
# global $as_val. Take advantage of shells that can avoid forks. The arguments
# must be portable across $(()) and expr.
if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
eval 'as_fn_arith ()
{
as_val=$(( $* ))
}'
else
as_fn_arith ()
{
as_val=`expr "$@" || test $? -eq 1`
}
fi # as_fn_arith
# as_fn_error STATUS ERROR [LINENO LOG_FD]
# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
as_status=$1; test $as_status -eq 0 && as_status=1
if test "$4"; then
as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
$as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
$as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
as_lineno_1=$LINENO as_lineno_1a=$LINENO
as_lineno_2=$LINENO as_lineno_2a=$LINENO
eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
# Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
# If we had to re-execute with $CONFIG_SHELL, we're ensured to have
# already done that, so ensure we don't try to do so again and fall
# in an infinite loop. This has already happened in practice.
_as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in #(((((
-n*)
case `echo 'xy\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
xy) ECHO_C='\c';;
*) echo `echo ksh88 bug on AIX 6.1` > /dev/null
ECHO_T=' ';;
esac;;
*)
ECHO_N='-n';;
esac
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir 2>/dev/null
fi
if (echo >conf$$.file) 2>/dev/null; then
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -pR'
fi
else
as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p='mkdir -p "$as_dir"'
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
as_test_x='test -x'
as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
SHELL=${CONFIG_SHELL-/bin/sh}
test -n "$DJDIR" || exec 7<&0 &1
# Name of the host.
# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
# Identity of this package.
PACKAGE_NAME='librelp'
PACKAGE_TARNAME='librelp'
PACKAGE_VERSION='1.11.0'
PACKAGE_STRING='librelp 1.11.0'
PACKAGE_BUGREPORT='rgerhards@adiscon.com'
PACKAGE_URL=''
ac_unique_file="src/relp.c"
# Factoring default headers for most tests.
ac_includes_default="\
#include
#ifdef HAVE_SYS_TYPES_H
# include