--- netdiag-1.1.orig/debian/README.debian +++ netdiag-1.1/debian/README.debian @@ -0,0 +1,16 @@ +This is a collection of diagnostic tools: + +tcpspray Checks throughput of a network link +trafshow Shows network packets on your system +statnet Shows network status +netwatch Shows network status in color. More info than statnet. +tcpblast Actively try to figure out maximum throughput on a link. + +All of these come with manpages some are constructed by Christoph Lameter + since they were lacking. + +You can enable access to the above commands and traceroute/tcpdump from a +user level by running the script diagperm with a parameter which group +should have access. + +Philip Hands --- netdiag-1.1.orig/debian/README.source +++ netdiag-1.1/debian/README.source @@ -0,0 +1,58 @@ +This package uses quilt to manage all modifications to the upstream +source. Changes are stored in the source package as diffs in +debian/patches and applied during the build. + +To configure quilt to use debian/patches instead of patches, you want +either to export QUILT_PATCHES=debian/patches in your environment +or use this snippet in your ~/.quiltrc: + + for where in ./ ../ ../../ ../../../ ../../../../ ../../../../../; do + if [ -e ${where}debian/rules -a -d ${where}debian/patches ]; then + export QUILT_PATCHES=debian/patches + break + fi + done + +To get the fully patched source after unpacking the source package, cd to +the root level of the source package and run: + + quilt push -a + +The last patch listed in debian/patches/series will become the current +patch. + +To add a new set of changes, first run quilt push -a, and then run: + + quilt new + +where is a descriptive name for the patch, used as the filename in +debian/patches. Then, for every file that will be modified by this patch, +run: + + quilt add + +before editing those files. You must tell quilt with quilt add what files +will be part of the patch before making changes or quilt will not work +properly. After editing the files, run: + + quilt refresh + +to save the results as a patch. + +Alternately, if you already have an external patch and you just want to +add it to the build system, run quilt push -a and then: + + quilt import -P /path/to/patch + quilt push -a + +(add -p 0 to quilt import if needed). as above is the filename to +use in debian/patches. The last quilt push -a will apply the patch to +make sure it works properly. + +To remove an existing patch from the list of patches that will be applied, +run: + + quilt delete + +You may need to run quilt pop -a to unapply patches first before running +this command. --- netdiag-1.1.orig/debian/changelog +++ netdiag-1.1/debian/changelog @@ -0,0 +1,484 @@ +netdiag (1.1-1ubuntu1) trusty; urgency=medium + + * Use autotools-dev to update config.{sub,guess} for new arches. + + -- Logan Rosen Mon, 06 Jan 2014 03:25:39 -0500 + +netdiag (1.1-1) unstable; urgency=high + + * Removed strobe because its license is not DFSG-free. (Closes: #686580) + + -- Michael Meskes Fri, 19 Oct 2012 11:08:54 +0200 + +netdiag (1.0-20) unstable; urgency=low + + * Added Brazilian Portuguese debconf translation. (Closes: # 668102) + * Bumped Standards-Version to 3.9.3, no changes needed. + * Added required force-reload option to init script. + + -- Michael Meskes Mon, 23 Apr 2012 13:26:20 +0200 + +netdiag (1.0-19) unstable; urgency=low + + * Fixed incorrect naming in init script. + + -- Michael Meskes Thu, 12 Jan 2012 12:47:22 +0100 + +netdiag (1.0-18) unstable; urgency=low + + * Remove auto-generated files from netwatch directory instead of patching + them. + * Added recommended targets to rules file. + * Re-create config.sub and config.guess when building tcpblast. + * Do not define HOME in tcpblast Makefile because it breaks ccache. + (Closes: #653134) + * Implement status option for init script. + + -- Michael Meskes Thu, 12 Jan 2012 10:45:31 +0100 + +netdiag (1.0-17) unstable; urgency=low + + * Added Danish debconf translations. (Closes: #628213) + * Bumped Standards-Version to 3.9.2, no changes needed. + + -- Michael Meskes Thu, 09 Jun 2011 15:30:38 +0200 + +netdiag (1.0-16) unstable; urgency=low + + * Set compiler flag to activate IPv6 for tcpspray. + + -- Michael Meskes Thu, 24 Feb 2011 10:03:00 +0100 + +netdiag (1.0-15) unstable; urgency=low + + * Added patch to fix handling of descriptor sets. (Closes: #613557) - thanks + to Mats Erik Andersson + * Added patch to implement IPv6 for strobe. (Closes: #610452) - thanks + to Mats Erik Andersson + + -- Michael Meskes Tue, 22 Feb 2011 15:51:34 +0100 + +netdiag (1.0-14) unstable; urgency=low + + * Re-packaged using separated patches. + * Bumped Standards-Version to 3.9.1, no changes needed. + * Added patch to make netload work on GNU/kFreeBSD and fix some bugs along + the way. (Closes: #608300) - thanks to Mats Erik Andersson + + * Added patch to add IPv6 support to tcpspray. (Closes: #613057) - thanks to + Mats Erik Andersson + + -- Michael Meskes Wed, 16 Feb 2011 13:06:54 +0100 + +netdiag (1.0-13) unstable; urgency=low + + * Applied patch by James Westby to make open(2) + usage standard conform, closes: #507213 + * Updated Japanese debconf translation, closes: #510898 + * Made init script not call itself. + + -- Michael Meskes Tue, 13 Jan 2009 15:57:48 +0100 + +netdiag (1.0-12) unstable; urgency=low + + * Fixed compilation with gcc 4.4, closes: #504833 + * Added Italian debconf translation, closes: #505810 + + -- Michael Meskes Sun, 16 Nov 2008 12:12:04 +0100 + +netdiag (1.0-11) unstable; urgency=low + + * Added Swedish debconf translation, closes: #503605 + + -- Michael Meskes Sun, 02 Nov 2008 16:01:35 +0100 + +netdiag (1.0-10) unstable; urgency=low + + * Do not link trafshow against libslang2, closes: #503006 + * Updated standards version to 3.8.0, no changes needed. + + -- Michael Meskes Wed, 22 Oct 2008 14:00:58 +0200 + +netdiag (1.0-9) unstable; urgency=low + + * Applied patch by Martin Guy to fix alignment problems + on arm, closes: #501596 + + -- Michael Meskes Thu, 09 Oct 2008 18:11:14 +0200 + +netdiag (1.0-8) unstable; urgency=low + + * Removed bashisms in diagoerm, closes: #465010 + * Removed comments from tcpblast.8 that confused lintian. + * Clarified copyright file a little bit. + + -- Michael Meskes Mon, 11 Feb 2008 10:32:14 +0100 + +netdiag (1.0-7) unstable; urgency=low + + * Reorganized package a little bit. + * Correctly remove configure generated files in clean target. + * Made package lintian clean. + * Bumped Standards-Version to 3.7.3, no changes needed. + + -- Michael Meskes Thu, 27 Dec 2007 11:29:23 +0100 + +netdiag (1.0-6) unstable; urgency=low + + * statnet used to accept signals only after a key was pressed + this behaviour was corrected + + -- Michael Meskes Mon, 01 Oct 2007 13:32:36 +0200 + +netdiag (1.0-5) unstable; urgency=low + + * Fixed restart target in init script, closes: #442197 + * Really clean up tcpblast in clean target, closes: #442686 + * Move statnet client to /usr/bin. + + -- Michael Meskes Sun, 16 Sep 2007 16:08:27 +0200 + +netdiag (1.0-4) unstable; urgency=low + + * Added Spanish debconf template, closes: #440998 + + -- Michael Meskes Mon, 10 Sep 2007 14:36:53 +0200 + +netdiag (1.0-3) unstable; urgency=low + + * Removed strip option in strobe, trafshow, tcpblast, closes: #437611 + * Updated menu file to use "Applications" instead of "Apps". + * Updated several po files that got mangled. + + -- Michael Meskes Wed, 15 Aug 2007 17:05:55 +0200 + +inetdiag (1.0-2) unstable; urgency=low + + * diagperm now uses dpkg-statoverride, closes: #321059 + * also fixed some more bugs in diagperm. + * Added init script to start statnetd, the data collector daemon and a + debconf question whethere it should be started at boot time. + * Added mini manpage for checkint fixing the last lintian complaint + + -- Michael Meskes Mon, 30 Jul 2007 12:38:29 +0200 + +netdiag (1.0-1) unstable; urgency=low + + * There is no version 0.* software in netdiag anymore, thus I decided to go + to version 1.0 for the package. + * Install netwatch.conf example, closes: #78972 + * Install diagperm manpage. + * New upstream version for netload + + -- Michael Meskes Fri, 27 Jul 2007 17:28:42 +0200 +netdiag (0.9-1) unstable; urgency=low + + * New upstream version for netload + * Added missing build-depends, closes: #430168 + + -- Michael Meskes Wed, 11 Jul 2007 15:38:05 +0200 + +netdiag (0.8-2) unstable; urgency=low + + * Updated config.sub and config.guess, closes: #430094 + * Set compat level to 5. + + -- Michael Meskes Fri, 22 Jun 2007 19:14:43 +0200 + +netdiag (0.8-1) unstable; urgency=low + + * New maintainer, closes: #418791 + * Acknowledge all changes, closes: #12254, #23183, #321063, #364208, #412777 + * Made diagperm more user friendly, closes: #71992 + * Added newer version of trafshow, closes: #12534, #381993 + * Added latest version of netwatch, closes: #16264, #31603, #40558, #121541 + * Added latest version of statnet, closes: #7794, #12306, #400358 + * Added latest version of tcpblast + * Added latest version of netload, closes: #192389 + * Tweaked output of netload slightly, closes: #192390 + * Updated copyright file + * Applied patch against unaligned accesses to netwatch and statnetd, + closes: #415166 + * Fixed install paths + + -- Michael Meskes Tue, 19 Jun 2007 16:32:48 +0200 + +netdiag (0.7-8) unstable; urgency=low + + * Acknowledge NMUs + * Patch netload to work with 2.6 kernels + + -- Robert Woodcock Mon, 05 Mar 2007 07:52:29 -0800 + +netdiag (0.7-7.2) unstable; urgency=low + + * NMU + * Patch from Remi Denis-Courmont fixing tcpspray to kill background + processes if the foreground process dies. Closes: #12254 + * Current standards version. + * Remove netload from the binary package as it will not work with 2.6 + kernels. Closes: #23183 + * Patch from Justin Pryzby fixing bad indentation in tcpspray man page. + Closes: #364208 + + -- Joey Hess Tue, 27 Feb 2007 20:52:41 -0500 + +netdiag (0.7-7.1) unstable; urgency=low + + * Don't set DESTDIR when building strobe, avoids strobe trying to read + services file from build directory, a potential security hole, and lets it + read /usr/lib/netdiag/strobe.services. Also disable reading of + strobe.services from current directory. Closes: #206905 + * Fix FTBFS with gcc 4.0, patch from Andreas Jochens. Closes: #287749 + * Disable "call home" code in netwatch. Closes: #317259 + * List all the programs in the package description. Closes: #221950 + * Make trafshow support (not complain about) systems with raw wifi + interfaces by adding ARPHRD_IEEE80211 to the list of families that + are passed through unprocessed. Closes: #296526 + + -- Joey Hess Wed, 3 Aug 2005 03:17:57 -0400 + +netdiag (0.7-7) unstable; urgency=low + + * Recent libc6-dev update broke (#207200), which broke + netwatch. Massaged headers a bit, closes: #208140 + * Also patched netwatch to use tmpfile() instead of tmpnam() when building + warnings. + + -- Robert Woodcock Mon, 1 Sep 2003 00:09:16 -0700 + +netdiag (0.7-6) unstable; urgency=low + + * Missed m4 in Build-Depends in the last upload, closes: #190793 + + -- Robert Woodcock Fri, 25 Apr 2003 19:10:26 -0700 + +netdiag (0.7-5) unstable; urgency=low + + * Added Build-Depends, closes: #190493 + * Corrected an error in the netload manpage, closes: #128382 + * Misc. policy-related cleanups + + -- Robert Woodcock Thu, 24 Apr 2003 16:28:37 -0700 + +netdiag (0.7-4) unstable; urgency=low + + * Applied Ralf Doering's patch to fix tcpblast's -p option, closes: #97572 + * Includes additional symlink for statnetd.1.gz manpage, closes: #99583 + * netwatch.c needs #include to compile these days + + -- Robert Woodcock Fri, 1 Jun 2001 11:49:44 -0700 + +netdiag (0.7-3) unstable; urgency=low + + * Uncommented mysterious 'to fix unaligned accesses' code in netwatch.c, + this should let things run on sparc (thanks to Anton Blanchard of + Linuxcare), fixes #74408 + * Added #include to statnet/statnet.c and stood back in awe of + how it managed to compile previously + * Hacked in old ip_options headers to netwatch.h to allow compilation on + newer glibc's. Came to the conclusion that netwatch is evil. + + -- Robert Woodcock Sat, 11 Nov 2000 16:57:45 -0800 + +netdiag (0.7-2) unstable; urgency=low + + * Axed dependancy on netstd + + -- Robert Woodcock Sat, 6 Nov 1999 15:08:03 -0800 + +netdiag (0.7-1) unstable; urgency=low + + * Changed maintainer field + + -- Robert Woodcock Tue, 26 Oct 1999 23:44:47 -0700 + +netdiag (0.7-0.1) unstable; urgency=low + + * tcpspray 1.1a + * tcpblast 19990504 + * netwatch 0.9g + * strobe 1.06 + * statnet 3.5 + * trafshow now has a portable IPv4 checksum routine, should be portable to + all architectures. closes: #16598 + * Fixed other .orig.tar.gz issues, strobe manpage and services file are no + longer in the debian diff + * netload now parses kernel 2.2.x /proc/net/dev. NOTE: this breaks + 2.0.x compatibility. Sorry. :) closes: #17034 + * Updated copyright file, added many URL's to upstream source. + closes: #23182 + * Uses new menu format + * Doesn't try to use SIGPWR on sparc (it doesn't exist there) + * Added in statnetd + + -- Robert Woodcock Sun, 24 Oct 1999 11:04:56 -0700 + +netdiag (0.6-3.2) frozen unstable; urgency=medium + + * non-maintainer sourceful upload, including patches from #29317 + * fixes serious problems with Alpha version of netwatch (code assumed long + is 32 bits), so should go into frozen. This will also ensure that the alpha + and i386 binaries both have source available. fixes:#30296 + * eth0 should now always be detected, hopefully. probably fixes:#30132 + * source can be unpacked without problems, so #24410 should be closed. + * I'll probably do another NMU to fix a couple of the other bugs if the + real maintainer doesn't react in a timely fashion. + + -- Paul Slootman Tue, 12 Jan 1999 09:50:13 +0100 + +netdiag (0.6-3.1) unstable; urgency=low + + * non-maintainer (binary-only) upload for Alpha + * replaced 386 asm part in trafshow-1.3/csum.c with corresponding alpha + stuff (also from the kernel). Please forward upstream! Something + similar needs to be done for ppc, I believe. + + -- Paul Slootman Wed, 11 Nov 1998 20:52:21 +0100 + +netdiag (0.6-3) frozen unstable; urgency=low + + * recompiled against libncurses4 + * sort out source package (closes: #26913, #26086) + + -- Philip Hands Tue, 10 Nov 1998 17:47:15 +0000 + +netdiag (0.6-2) frozen unstable; urgency=low + + * remove spurious postrm (closes: #20649) + * drop debstd, use debhelper instead. + + -- Philip Hands Sat, 25 Apr 1998 15:38:01 +0100 + +netdiag (0.6-1) unstable; urgency=low + + * new upstream versions of trafshow (1.3) and netwatch (0.7a) + * move strobe.services into /usr/lib/netdiag + + -- Philip Hands Sat, 12 Jul 1997 10:31:46 +0100 + +netdiag (0.5-3) unstable; urgency=low + + * trafshow: increase maximum interface name size from 4 to 14 (Bug: #11184) + + -- Philip Hands Sat, 12 Jul 1997 10:31:46 +0100 + +netdiag (0.5-2) unstable; urgency=low + + * stop diagperm setting perms for tcpdump (Bug #10554) + * change trafwatch to trafshow in description (Bug #9854) + + -- Philip Hands Thu, 26 Jun 1997 11:47:08 +0100 + +netdiag (0.5-1) unstable; urgency=low + + * update for strobe (Bug #9069) + * update for netwatch + * update for trafshow + * write netwatch man page to match new version(Bug #8820) + * fix typo in tcpblast man page (Bug #8891) + + -- Philip Hands Thu, 19 Jun 1997 10:25:51 +0100 + +netdiag (0.4-3) unstable; urgency=low + + * Adds 4 menu items into the debian menus + + -- Christoph Lameter Sat, 14 Dec 1996 18:57:54 -0800 + +netdiag (0.4-2) unstable; urgency=low + + * files made to be owned by group root + * diagperm fixed. Made to work without suidmanager for those + who want to run the script after each update. + + -- Christoph Lameter Sun, 8 Dec 1996 19:17:38 -0800 + +netdiag (0.4-1) unstable; urgency=low + + * Update for tcpblast + * New tool netload + * Some tools move to /usr/bin + * Manpage written for netload and diagperm + * suidmanager used by diagperm script + + -- Christoph Lameter Sat, 7 Dec 1996 21:14:10 -0800 + +netdiag (0.3-3) unstable; urgency=low + + * memory allocation problem in strobe fixed. + + -- Christoph Lameter Sun, 10 Nov 1996 15:44:46 -0800 + +netdiag (0.3-2) unstable; urgency=low + + * debmake: compressed manpage, doc, location of copyright etc + + -- Christoph Lameter Tue, 22 Oct 1996 18:20:49 -0700 + +netdiag (0.3-1) unstable; urgency=low + + * upgrade netwatch to 0.5 + * include tcpblast (no manpage so far) + + -- Christoph Lameter Tue, 1 Oct 1996 09:00:00 -0800 + +netdiag (0.2-9) unstable; urgency=medium + + * diagperm made relative links to ../sbin instead of ../../sbin + + -- Christoph Lameter Tue, 1 Oct 1996 09:00:00 -0800 + +netdiag (0.2-8) unstable; urgency=medium + + * diagperm makes symlinks in /usr/local/bin and not in /usr/bin in order + not to interfere with debian packaging system. + + -- Christoph Lameter Wed, 25 Sep 1996 09:00:00 -0800 + +netdiag (0.2-7) unstable; urgency=medium + + * diagperm moved to /usr/sbin, + * Execute perms for changelog.debian removed + + -- Christoph Lameter Wed, 18 Sep 1996 09:00:00 -0800 + +netdiag (0.2-6) unstable; urgency=medium + + * Binaries moved from /usr/bin to /usr/sbin + + -- Christoph Lameter Wed, 11 Sep 1996 09:00:00 -0800 + +netdiag (0.2-5) unstable; urgency=high + + * Documentation in /usr/doc/netdiag was not up to date + * postrm script removed + + -- Christoph Lameter Tue, 10 Sep 1996 09:00:00 -0800 + +netdiag (0.2-4) unstable; urgency=high + + * All netdiag commands are only accessible from root. + A script is provided in /usr/doc/netdiag to make commands related + to network diagnostics executable by a selectable group. + + -- Christoph Lameter Tue, 10 Sep 1996 09:00:00 -0800 + +netdiag (0.2-3) unstable; urgency=high + + * The Netdiag commands are now only accessible from groupmembers of + group adm (security) + + -- Christoph Lameter Thu, 5 Sep 1996 09:00:00 -0800 + +netdiag (0.2-2) unstable; urgency=low + + * Made netdiag depend on netbase and netstd + + -- Christoph Lameter Wed, 4 Sep 1996 09:00:00 -0800 + +netdiag (0.2-1) unstable; urgency=low + + * Added trafwatch and netwatch + + -- Christoph Lameter Sat, 31 Aug 1996 14:51:46 -0800 --- netdiag-1.1.orig/debian/checkint.1 +++ netdiag-1.1/debian/checkint.1 @@ -0,0 +1,28 @@ +.TH CHECKINT 1 +.SH NAME +checkint \- Show active network interfaces +.SH SYNOPSIS +\fBcheckint\fP +.br +.SH DESCRIPTION +checkint shows all active network interfaces +.SH AUTHOR +.PP +.I Luis Falcon +is the original author. +.RS +.nf +lfalcon@thymbra.com +.fi +.RE +.PP +.I Michael Meskes +wrote this manpage. +.RS +.nf +meskes@debian.org +.fi +.RE +.SH COPYRIGHT GPL + + --- netdiag-1.1.orig/debian/compat +++ netdiag-1.1/debian/compat @@ -0,0 +1 @@ +5 --- netdiag-1.1.orig/debian/config +++ netdiag-1.1/debian/config @@ -0,0 +1,26 @@ +#!/bin/sh +set -e + +. /usr/share/debconf/confmodule +db_capb backup + +parse_default() { + case `sed -n 's/^run_statnetd=//p' "$@"` in + 0) db_set netdiag/run_statnetd false;; + 1) db_set netdiag/run_statnetd true;; + *) return 1;; + esac +} + +if [ -f /etc/default/netdiag ] +then + # Load previous value (may have been changed manually). + parse_default /etc/default/netdiag || true +else + # older version of the package do not have a start script for statnetd at all + db_set netdiag/run_statnetd false +fi + +db_input medium netdiag/run_statnetd || true +db_go + --- netdiag-1.1.orig/debian/control +++ netdiag-1.1/debian/control @@ -0,0 +1,17 @@ +Source: netdiag +Section: net +Priority: extra +Maintainer: Ubuntu Developers +XSBC-Original-Maintainer: Michael Meskes +Standards-Version: 3.9.3 +Build-Depends: libncurses-dev, debhelper (>= 5), m4, libpcap0.8-dev, po-debconf (>= 0.5.0), quilt, autotools-dev, automake + +Package: netdiag +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends}, netbase +Description: Net-Diagnostics (trafshow,netwatch,statnet,tcpspray,tcpblast) + Netdiag contains a collection of small tools to analyze network traffic and + configuration of remote hosts. It is of invaluable help if your + system is showing strange network behaviour and you want to find out what + your network is doing. The included tools are tcpblast, netload, trafshow, + netwatch, statnet, and tcpspray. --- netdiag-1.1.orig/debian/copyright +++ netdiag-1.1/debian/copyright @@ -0,0 +1,87 @@ +This is a collection of several small network utilities which all have a +different copyright owner. +----------------------------------------------------- + +STATNET: + +/* Statnet is protected under the GNU Public License (GPL2). */ +/* Author: Jeroen Baekelandt (jeroenb@igwe.vub.ac.be) */ +/* 27DEC95: Scot E. Wilcoxon (sewilco@fieldday.mn.org) */ + +From: http://wilcoxon.org/~sewilco/statnet.html + +TCPSPRAY: + + * tcpspray.c - v1.1 + * + * measure throughput of half (via discard) and full (via echo) duplex + * tcp connection + * + * Greg Christy + +From: ftp://sunsite.unc.edu/pub/Linux/system/network/sunacm/Other/tcpspray/tcpspray.1.1a.tar.gz + +TRAFSHOW: +BSD + +The original distribution of the program is available at +ftp://ftp.nsk.su/pub/RinetSoft/trafshow-X.Y.tgz. + +NETWATCH: +GPL Version 2 +Downloaded from: http://www.ibiblio.org/pub/Linux/system/network + +NETLOAD: +Title: netload +Version: 1.2.1 +Entered-date: 07/06/2007 +Description: network interface monitoring system with email alarm notification +Keywords: network, security, network load, ncurses, system administration, sendmail +Author: lfalcon@thymbra.com (Luis Falcon) +Maintained-by: lfalcon@thymbra.com (Luis Falcon) +Primary-site: http://www.thymbra.com/downloads/netload +Alternate-site: +Original-site: +Platforms: Linux i386 +Copying-policy: GPL + +TCPBLAST: +BSD + +From http://www.ibiblio.org/pub/Linux/system/network/admin/tcpblast-20011111.tar.gz + +DIAGPERM: +Copyright (C) 1996-2008 Christoph Lameter and Michael Meskes +Placed under GPL. + +Note: +The GPL is located at /usr/share/common-licenses/GPL-2 on your Debian system. +The BSD license is: + +Copyright (c) The Regents of the University of California. +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: +1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. +3. Neither the name of the University nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +SUCH DAMAGE. + --- netdiag-1.1.orig/debian/diagperm +++ netdiag-1.1/debian/diagperm @@ -0,0 +1,56 @@ +#!/bin/sh +# Change permissions, links so that a group of users can access the +# diagnostic commands. +# Originally (C) Christoph Lameter +# Changes in 2007 and 2008 done by Michael Meskes +# Placed under GPL + +COMMANDS="netwatch trafshow" + +errorexit() +{ + echo -n "ERROR: " + echo $1; + exit 1; +} + + +if [ "x$1" = "x" ]; then + echo "Usage: diagperm [set] | unset" +else + if [ "`id -u`" -ne 0 ]; then + errorexit "This program must be run by super-user (root)." + fi + if [ $1 = "unset" ] + then + for i in $COMMANDS; do + if [ -x /usr/sbin/dpkg-statoverride ]; then + dpkg-statoverride --remove /usr/sbin/$i || errorexit "Cannot suid unregister /usr/sbin/$i." + fi + if [ -f /usr/sbin/$i ]; then + chgrp root /usr/sbin/$i + chmod 0755 /usr/sbin/$i + fi + done + else + [ $1 = "set" ] && shift; + if grep -q "^$1:" /etc/group; then + for i in $COMMANDS; do + if [ -x /usr/sbin/dpkg-statoverride ]; then + dpkg-statoverride --update --add root $1 4754 /usr/sbin/$i || errorexit "Cannot suid register /usr/sbin/$i ." + else +# +# this is a fallback for systems without dpkg +# + if [ -f /usr/sbin/$i ]; then + chgrp $1 /usr/sbin/$i + chmod 4754 /usr/sbin/$i + fi + fi + done + echo "Permissions enabled for members of group $1." + else + echo "Group $1 not in /etc/group." + fi + fi +fi --- netdiag-1.1.orig/debian/diagperm.8 +++ netdiag-1.1/debian/diagperm.8 @@ -0,0 +1,13 @@ +.TH DEBPKG 88888888ties" "DEBIAN" \" -*- nroff -*- +.SH NAME +diagperm \- Enable access to network diagnostic tools for a user group +.SH SYNOPSIS +\fBdiagperm\fP \fBgroupname\fP +.br +.SH DESCRIPTION +diagperm enabled access for +.B trafshow netwatch +for a group of users by changing permissions using dpkg-statoverride if +possible +.SH AUTHOR +Christoph Lameter --- netdiag-1.1.orig/debian/dirs +++ netdiag-1.1/debian/dirs @@ -0,0 +1,5 @@ +usr/bin +usr/sbin +usr/lib/netdiag +usr/share/man/man1 +usr/share/man/man8 --- netdiag-1.1.orig/debian/init +++ netdiag-1.1/debian/init @@ -0,0 +1,89 @@ +#!/bin/sh +#/etc/init.d/netdiag: start statnet daemon. + +### BEGIN INIT INFO +# Provides: netdiag +# Short-Description: Start network data collector +# Description: Start statnet daemon, the network data collector for statnet. +# Required-Start: $local_fs $remote_fs +# Required-Stop: $local_fs $remote_fs +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +### END INIT INFO + +PATH=/bin:/usr/bin:/sbin:/usr/sbin + +test -x /usr/sbin/statnetd || exit 0 + +# For configuration of the init script use the file +# /etc/default/netdiag, do not edit this init script. + +# Set run_statnetd to 1 to start statnetd or 0 to disable it. +run_statnetd=0 + +# Specify additional statnetd options here (see manpage). +statnetd_options="" + +[ -e /etc/default/netdiag ] && . /etc/default/netdiag + +NAME=netdiag +DAEMON=/usr/sbin/statnetd + +# Get lsb functions +. /lib/lsb/init-functions + +case "$1" in + start) + if [ $run_statnetd = 1 ] + then + echo -n "Starting statnet daemon: " + if start-stop-daemon --start --quiet \ + --exec $DAEMON -- -d $statnetd_options + then + echo statnetd. + else + echo + fi + fi + ;; + + stop) + if [ $run_statnetd = 1 ] + then + echo -n "Stopping statnet daemon: " + if start-stop-daemon --stop --quiet --exec $DAEMON + then + echo statnetd. + else + echo + fi + fi + ;; + + restart|force-reload) + if [ $run_statnetd = 0 ]; then exit 0; fi + echo -n "Restarting statnet daemon." + start-stop-daemon --stop --quiet --exec $DAEMON + echo -n "." + sleep 5 + echo -n "." + if start-stop-daemon --start --quiet \ + --exec $DAEMON -- -d $statnetd_options + then + echo statnetd. + else + echo + fi + ;; + + status) + status_of_proc "$DAEMON" statnetd + ;; + + *) + echo "Usage: /etc/init.d/netdiag {start|stop|restart|force-reload}" + exit 1 + +esac + +exit 0 --- netdiag-1.1.orig/debian/install +++ netdiag-1.1/debian/install @@ -0,0 +1,3 @@ +debian/diagperm /usr/sbin +debian/diagperm.8 /usr/share/man/man8 +debian/checkint.1 /usr/share/man/man1 --- netdiag-1.1.orig/debian/links +++ netdiag-1.1/debian/links @@ -0,0 +1,2 @@ +/usr/share/man/man1/statnet.1.gz /usr/share/man/man1/statnetd.1.gz +/usr/share/man/man8/tcpblast.8.gz /usr/share/man/man8/udpblast.8.gz --- netdiag-1.1.orig/debian/menu +++ netdiag-1.1/debian/menu @@ -0,0 +1,6 @@ +?package(netdiag):needs="text" section="Applications/Network/Monitoring" title="statnet" \ + command="/usr/bin/statnet" +?package(netdiag):needs="text" section="Applications/Network/Monitoring" title="netwatch" \ + command="/usr/sbin/netwatch" +?package(netdiag):needs="text" section="Applications/Network/Monitoring" title="trafshow" \ + command="/usr/sbin/trafshow" --- netdiag-1.1.orig/debian/patches/adapt_netload_to_bsd.diff +++ netdiag-1.1/debian/patches/adapt_netload_to_bsd.diff @@ -0,0 +1,424 @@ +Description: Implement interface statistics for GNU/kFreeBSD. + The original source for "netload" uses "/proc/net/dev" + to collect information on networkinterfaces. This is not + trustworthy for GNU/kFreeBSD. An alternate source using + getifaddrs(3) is here introduced for *BSD. + . + The present implementation works on GNU/Linux, GNU/kFreeBSD, + FreeBSD, and OpenBSD. + . + The format string for parsing the content of "/proc/net/dev" + is incorrect, an additional item is present in the string. + . + A large number of other buffer overrun problems are also + meded. The are relevent also for GNU/Linux. +Author: Mats Erik Andersson +Forwarded: no +Last-Update: 2011-01-11 + +--- netdiag-1.0/netload-1.2.2/Makefile 2007-07-11 19:02:08.000000000 +0200 ++++ netdiag-1.0/netload-1.2.2/Makefile 2011-01-11 00:05:16.000000000 +0100 +@@ -3,7 +3,7 @@ + TARGET= "/usr/local/bin/" + MANTARGET= "/usr/share/man/man1" + all : +- $(CC) netload.c -o netload $(CLIBS) ++ $(CC) $(CFLAGS) netload.c -o netload $(CLIBS) + + install: + install -m 755 netload $(TARGET) +--- netdiag-1.0/netload-1.2.2/netload.c 2007-07-11 17:37:38.000000000 +0200 ++++ netdiag-1.0/netload-1.2.2/netload.c 2011-01-11 13:54:55.000000000 +0100 +@@ -19,14 +19,32 @@ + #include + #include + #include ++#include + #include + #include + #include + ++#ifndef __linux__ ++ /* Targeted at *BSD, using getifaddrs(3). */ ++# include ++# include ++# include ++# include ++# include ++#endif /* !__linux__ */ ++ + #define CMD_LINE fprintf (stderr,"usage : netload device [-t secs] \n\tnetload -setup\n") + #define MAILER "/usr/lib/sendmail -t " + #define PROC_DEV_SIZE 10000 + ++#ifndef IF_NAMESIZE ++# define IF_NAMESIZE 16 ++#endif ++ ++#ifndef MAXPATHLEN ++# define MAXPATHLEN 512 ++#endif ++ + WINDOW *panel; + WINDOW *lever; + WINDOW *credit; +@@ -35,10 +53,10 @@ + int INIT = 0; + long long int old_rec=0; + long long int old_trans=0; +-long long temp_load=0; +-long long max_sofar=0; ++long long int temp_load=0; ++long long int max_sofar=0; + +-int alarm=0; /* High-load alarm */ ++int hlalarm=0; /* High-load alarm */ + int salarm=0; /* sound alarm */ + int ealarm=0; /* email notification */ + int aperiod; /* period for re-activating the email alarm */ +@@ -64,7 +82,7 @@ + ******************************************************************************************************************************/ + + +-main (int argc, char *argv[]) ++int main (int argc, char *argv[]) + { + + FILE *source; +@@ -74,7 +92,7 @@ + int dormant; + int scale; + int argument_length; +-char mask [6]; ++char mask [IF_NAMESIZE + 4]; + + initscr (); + nonl(); +@@ -90,6 +108,13 @@ + + scale = check_netloadrc (argv[1]); /* check status of .netloadrc, plus getting the alarm and scale factor settings of the device */ + ++if (scale == 0) ++ { ++ fprintf (stderr, "Unable to set positive scaling factor. Aborting.\n"); ++ endwin (); ++ exit (1); ++ } ++ + signal (SIGINT,reset); + + if (argc > 2) +@@ -101,9 +126,10 @@ + setup_netload (); + + +- +-line = malloc (100*sizeof (char)); +- ++#ifndef __linux__ ++/* The parse string variable within main(). */ ++line = malloc (MAXPATHLEN); ++#endif + + init_pair (COLOR_CYAN,COLOR_CYAN, COLOR_BLACK); + init_pair (COLOR_RED, COLOR_RED, COLOR_BLACK ); +@@ -111,9 +137,12 @@ + init_pair (COLOR_BLUE, COLOR_BLUE,COLOR_BLACK); + + +-strcpy (mask,argv[1]); +-argument_length = strlen (argv[1]); +-mask [argument_length]=':'; ++strncpy (mask, argv[1], sizeof (mask)); ++mask [sizeof (mask) - 1] = '\0'; ++argument_length = (strlen (argv[1]) < IF_NAMESIZE) ++ ? strlen (argv[1]) : IF_NAMESIZE; ++mask [argument_length] = ':'; ++mask [argument_length + 1] = '\0'; + + panel = newwin (15,60,7,10); + +@@ -123,6 +152,7 @@ + + while (1) + { ++#ifdef __linux__ + if ((source=fopen ("/proc/net/dev","r")) == NULL) + { + fprintf (stderr, "Couldn't open source file\n"); +@@ -139,11 +169,72 @@ + endwin (); + exit (1); + } +- ++#else /* !__linux__ */ ++ /* An interface statistics line will be simulated by ++ * figures collected from a call to getifaddrs(3). */ ++ struct ifaddrs *ifaddr, *ifa; ++ struct if_data *if_data = NULL; ++ ++ if (getifaddrs (&ifaddr) < 0) ++ { ++ fprintf (stderr, "Could not access interface data: %s.\n", ++ strerror (errno)); ++ endwin (); ++ exit (1); ++ } ++ ++ for (ifa = ifaddr; ifa; ifa = ifa->ifa_next) ++ { ++ if ((strcmp (ifa->ifa_name, argv[1]) == 0) ++ && (ifa->ifa_addr->sa_family == AF_LINK)) ++ { ++ if_data = ifa->ifa_data; ++ break; ++ } ++ } ++ ++ if ((ifa == NULL) || (if_data == NULL)) ++ { ++ freeifaddrs (ifaddr); ++ fprintf (stderr,"Device \"%s\" not found\n", argv[1]); ++ endwin (); ++ exit (1); ++ } ++ ++# ifdef __OpenBSD__ ++# define FORMAT "%s: %ju %ju %ju %ju %lu %lu %lu %ju" \ ++ " %ju %ju %ju %lu %lu %ju %lu %lu\n" ++# else ++# define FORMAT "%s: %lu %lu %lu %lu %lu %lu %lu %lu" \ ++ " %lu %lu %lu %lu %lu %lu %lu %lu\n" ++#endif ++ ++ /* Collect the available information. */ ++ snprintf (line, MAXPATHLEN, FORMAT, ++ /* Input section. */ ++ ifa->ifa_name, ++ if_data->ifi_ibytes, if_data->ifi_ipackets, ++ if_data->ifi_ierrors, if_data->ifi_iqdrops, ++ 0L, 0L, 0L, /* rfifo, rframe, rcompressed, */ ++ if_data->ifi_imcasts, ++ /* Output section. */ ++ if_data->ifi_obytes, if_data->ifi_opackets, ++ if_data->ifi_oerrors, ++ 0L, 0L, /* sdrop, sfifo */ ++ if_data->ifi_collisions, ++ (long unsigned int) if_data->ifi_link_state, ++ 0L); /* scompressed */ ++ ++ freeifaddrs (ifaddr); ++#endif /* !__linux__ */ + + show_load (line,scale,dormant); +- lseek (source,0,SEEK_SET); ++ ++#ifdef __linux__ ++ lseek (fileno (source), 0, SEEK_SET); + fclose (source); ++#endif ++ + sleep (dormant); + + } +@@ -160,7 +251,7 @@ + void show_load (char *line,int scale,int dormant) + { + +-char device [5]; ++char device [IF_NAMESIZE]; + + long long int rbytes, rec_load, trans_load, total_load, sbytes=0; + long long int rcompressed, colls, compressed, multicast,packets,rpackets; +@@ -171,9 +262,13 @@ + + int load_level; + ++#ifdef __GLIBC__ ++# define SCANFORMAT "%[^:]: %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld\n" ++#else /* __OpenBSD__ || __FreeBSD__ */ ++# define SCANFORMAT "%[^:]: %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld %lld\n" ++#endif + +- +- sscanf (line,"%[^:]: %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld %Ld\n",&device,&rbytes,&rpackets,&rerrors,&rdrop,&rfifo,&rframe,&rcompressed,&multicast, &sbytes, &packets,&errors,&drop,&fifo,&colls,&carrier,&compressed); ++ sscanf (line, SCANFORMAT, device,&rbytes,&rpackets,&rerrors,&rdrop,&rfifo,&rframe,&rcompressed,&multicast, &sbytes, &packets,&errors,&drop,&fifo,&colls,&carrier,&compressed); + + + +@@ -183,13 +278,13 @@ + wprintw (INFO,"ERRORS\t DROP\tFIFO"); + wmove (INFO,3,1); + +- wprintw (INFO,"RECV\t%Ld",rbytes); ++ wprintw (INFO,"RECV\t%lld",rbytes); + wmove (INFO,3,27); +- wprintw (INFO,"%Ld\t %Ld\t %Ld",rerrors,rdrop,rfifo); ++ wprintw (INFO,"%lld\t %lld\t %lld",rerrors,rdrop,rfifo); + wmove (INFO,4,1); +- wprintw (INFO,"TRANS\t%Ld",sbytes); ++ wprintw (INFO,"TRANS\t%lld",sbytes); + wmove (INFO,4,27); +- wprintw (INFO,"%Ld\t %Ld\t %Ld",errors,drop,fifo); ++ wprintw (INFO,"%lld\t %lld\t %lld",errors,drop,fifo); + + + rec_load = rbytes - old_rec; +@@ -229,21 +324,21 @@ + werase (panel); + werase (lever); + wmove (panel,1,5); +- wprintw (panel,"Maximum device load %Ld (%s)",max_sofar,current_time); ++ wprintw (panel,"Maximum device load %lld (%s)",max_sofar,current_time); + wmove (panel,2,1); +- whline (panel,0,58); ++ whline (panel, '-', 58); + wmove (panel,4,14); + wattrset (panel,A_BOLD); + wprintw (panel, "Relative Load in %d sec(s) step",dormant); + wmove (panel,6,15); + wattrset (panel,COLOR_PAIR (COLOR_CYAN)); +- wprintw (panel, "Received \t %Ld",rec_load); ++ wprintw (panel, "Received \t %lld", rec_load); + + wmove (panel,7,15); +- wprintw (panel, "Transmitted\t %Ld",trans_load); ++ wprintw (panel, "Transmitted\t %lld", trans_load); + + wmove (panel,8,15); +- wprintw (panel, "Total load\t %Ld",rec_load + trans_load); ++ wprintw (panel, "Total load\t %lld", rec_load + trans_load); + + + wmove (panel,13,22); +@@ -266,11 +361,10 @@ + if (load_level >20 && load_level < 40) + { + wattrset (lever,COLOR_PAIR (COLOR_GREEN)); +- COLOR_PAIR (COLOR_GREEN); + } + if (load_level > 40) + { +- if ( alarm==1) ++ if ( hlalarm==1) + { + if (salarm == 1) + beep (); +@@ -279,7 +373,6 @@ + } + + wattrset (lever,COLOR_PAIR (COLOR_RED)); +- COLOR_PAIR (COLOR_RED); + } + for (marks=0;marks < load_level+1;marks++) + wechochar (lever,ACS_BLOCK); +@@ -305,7 +398,8 @@ + char *time_holder; + time (&reloj); + time_holder = ctime (&reloj); +-time_holder [24] =0; ++/* Remove NL. */ ++time_holder [strlen (time_holder) - 1] = '\0'; + return (time_holder); + } + +@@ -369,10 +463,10 @@ + + FILE *source; + +-char *line; +-char *period; ++char *line, *line_str, *home; ++char *period, *period_str; + char content [10000]; +-char mask [6]; ++char mask [IF_NAMESIZE + 4]; + int argument_length; + int filesize=0; + int counter=1; +@@ -380,18 +474,34 @@ + + endwin (); + +-netrc= malloc ( 100*sizeof (char)); +-netrc = getenv ("HOME"); +-netrc = strcat ( netrc,"/.netloadrc"); ++netrc = malloc (MAXPATHLEN); ++netrc[0] = '\0'; ++home = getenv ("HOME"); + +-strcpy (mask,device); +-argument_length = strlen (device); +-mask [argument_length]=':'; ++/* Check that HOME was set. */ ++if (home == NULL) ++ { ++ fprintf (stderr, "Unable to detect path for HOME.\n"); ++ /* Report scaling naught to abort further action. */ ++ return 0; ++ } + ++strncpy (netrc, home, MAXPATHLEN); ++netrc[MAXPATHLEN - 1] = '\0'; + ++strncat (netrc, "/.netloadrc", MAXPATHLEN - strlen ("/.netloadrc")); + +-line = malloc (10000*sizeof (char)); +-period = malloc (10000*sizeof (char)); ++strncpy (mask, device, sizeof (mask)); ++mask [sizeof (mask) - 1] = '\0'; ++argument_length = (strlen (device) < IF_NAMESIZE) ++ ? strlen (device) : IF_NAMESIZE; ++mask [argument_length] = ':'; ++mask [argument_length + 1] = '\0'; ++ ++ ++/* Local parse string variable. */ ++line = line_str = malloc (10000*sizeof (char)); ++period = period_str = malloc (10000*sizeof (char)); + + + if ((source=fopen (netrc,"r")) == NULL) +@@ -442,7 +552,7 @@ + line = strstr (content,mask); + + if ( strstr ( content,"alarm:1" )) +- alarm=1; ++ hlalarm=1; + + if ( strstr ( content,"sound:1" )) + salarm=1; +@@ -483,7 +593,8 @@ + sfactor = atoi (line); + + fclose (source); +- ++free (period_str); ++free (line_str); + + return ( sfactor ); + +@@ -526,15 +637,17 @@ + fprintf (mail, "\n\nSnapshot of device %s ( All the values are in Bytes )\n\n", device); + fprintf (mail, "Time of High-load : %s\n", current_time); + fprintf (mail, "Time for next email check: %d minutes\n\n", aperiod/60); +- fprintf (mail, "Total Received:\t\t %Ld\n", rbytes); +- fprintf (mail, "Total Sent:\t\t %Ld\n\n", sbytes); +- fprintf (mail, "Rec. in the last %d seconds:\t\t%Ld\n",dormant, rec_load); +- fprintf (mail, "Sent in the last %d seconds:\t\t%Ld\n",dormant, trans_load); +- fprintf (mail, "Total in the last %d seconds:\t\t%Ld\n\n\n",dormant, rec_load+trans_load); +- fprintf (mail, "Average # Bytes per second: %Ld\n", total_load); ++ fprintf (mail, "Total Received:\t\t %lld\n", rbytes); ++ fprintf (mail, "Total Sent:\t\t %lld\n\n", sbytes); ++ fprintf (mail, "Rec. in the last %d seconds:\t\t%lld\n",dormant, rec_load); ++ fprintf (mail, "Sent in the last %d seconds:\t\t%lld\n",dormant, trans_load); ++ fprintf (mail, "Total in the last %d seconds:\t\t%lld\n\n\n",dormant, rec_load+trans_load); ++ fprintf (mail, "Average # Bytes per second: %lld\n", total_load); + pclose(mail); + + aflag=0; ++free (message); + ++return 0; + } + --- netdiag-1.1.orig/debian/patches/adaption_to_kfreebsd.diff +++ netdiag-1.1/debian/patches/adaption_to_kfreebsd.diff @@ -0,0 +1,94 @@ +Description: Adaptions to GNU/kFreeBSD. + statnet: A replacement macro helps to get + compilable code, but it still fails at execution. + SOCK_RAW cannot replace SOCK_PACKET, so heavy + rewriting would be necessary. + . + tcpblast: The upstream code is corrupt also for + GNU/Linux, but that kernel is more forgiving. + The correction implements a working service + also for GNU/kFreeBSD. + . + trafshow: A simple addition of _BSD_SOURCE is + sufficient to restore functionality for + GNU/kFreeBSD. + . + netload: This executable is functional in itself, + but fails since "/proc/net/dev" is presently broken + in GNU/kFreeBSD. + . + netwatch: The code uses NETLINK with Linux, so can + not be easily ported. No hope of even compiling + the source in GNU/kFreeBSD. +Author: Mats Erik Andersson +Forwarded: no +Last-Update: 2010-12-29 + +--- netdiag-1.0.debian/statnet-3.8/statnet.c ++++ netdiag-1.0/statnet-3.8/statnet.c +@@ -25,6 +25,9 @@ + #ifndef DIPC_SIG_READER + #define DIPC_SIG_READER SIGURG /* for compilation on non-DIPC systems */ + #endif ++#ifndef SIGPWR ++#define SIGPWR SIGINFO /* fallback for GNU/kFreeBSD */ ++#endif + #ifndef DIPC_SIG_WRITER + #define DIPC_SIG_WRITER SIGPWR /* for compilation on non-DIPC systems */ + #endif +--- netdiag-1.0.debian/statnet-3.8/statnetd.c ++++ netdiag-1.0/statnet-3.8/statnetd.c +@@ -27,6 +27,9 @@ + #ifndef DIPC_SIG_READER + #define DIPC_SIG_READER SIGURG /* for compilation on non-DIPC systems */ + #endif ++#ifndef SIGPWR ++#define SIGPWR SIGINFO /* fallback for GNU/kFreeBSD */ ++#endif + #ifndef DIPC_SIG_WRITER + #define DIPC_SIG_WRITER SIGPWR /* for compilation on non-DIPC systems */ + #endif +--- netdiag-1.0.debian/tcpblast-20011111/tcpblast.c ++++ netdiag-1.0/tcpblast-20011111/tcpblast.c +@@ -601,9 +601,12 @@ + case 'S': + opt_source = 1; + #ifdef HAVE_INET_PTON ++ if (family != PF_UNSPEC) ++ af = family; ++ + errpton = inet_pton(af, optarg, &source); + #ifdef HAVE_IN6_ADDR +- if (errpton <= 0) { ++ if ((errpton <= 0) && (family == PF_UNSPEC)) { + af = AF_INET6; + errpton = inet_pton(af, optarg, &source6); + } +@@ -714,10 +717,11 @@ + f = socket(ai->ai_family, ai->ai_socktype, 0); + if (f < 0) continue; + sndbuf(f, setbufsize, name); +- setmaxseg(f, maxseg, name); +- if (af == AF_INET) bind_local (f, af, lport, source); ++ if (tcp) ++ setmaxseg(f, maxseg, name); ++ if (ai->ai_family == AF_INET) bind_local (f, ai->ai_family, lport, source); + #ifdef HAVE_IN6_ADDR +- if (af == AF_INET6) bind_local6(f, af, lport, source6); ++ if (ai->ai_family == AF_INET6) bind_local6(f, ai->ai_family, lport, source6); + #endif /* HAVE_IN6_ADDR */ + if (connect(f, (struct sockaddr *) ai->ai_addr, ai->ai_addrlen) < 0) { + close(f); f = -1; continue; +--- netdiag-1.0.debian/trafshow-5.2.3/parse_ip.c ++++ netdiag-1.0/trafshow-5.2.3/parse_ip.c +@@ -11,6 +11,10 @@ + #include + #endif + ++#ifdef __FreeBSD_kernel__ ++# define _BSD_SOURCE 1 ++#endif ++ + #include + #include + #include --- netdiag-1.1.orig/debian/patches/netwatch.diff +++ netdiag-1.1/debian/patches/netwatch.diff @@ -0,0 +1,121 @@ +Description: Make program compile and work on Linux. +Author: Michael Meskes +--- netdiag-1.0.orig/netwatch-1.0c/netwatch.1 ++++ netdiag-1.0/netwatch-1.0c/netwatch.1 +@@ -1,5 +1,5 @@ + .\" "%W% %G%" +-.TH NETWATCH\ Version 0.9h ++.TH NETWATCH + .SH NAME + Netwatch \- Ethernet Internet Protocol Monitor + .SH SYNOPSIS +--- netdiag-1.0.orig/netwatch-1.0c/warning.c ++++ netdiag-1.0/netwatch-1.0c/warning.c +@@ -1,6 +1,8 @@ + #include "netwatch.h" + #include + #include ++#include ++#include + + static FILE *tmpfp; + static char tmpname[256]; +--- netdiag-1.0.orig/netwatch-1.0c/netwatch.c ++++ netdiag-1.0/netwatch-1.0c/netwatch.c +@@ -64,6 +64,7 @@ + #endif + #endif + ++#include + #include + #include + #include +@@ -1960,8 +1961,8 @@ int + close (1); + dup2 (osocket[1], 1); + close (osocket[1]); +- execlp ("netresolv", "netresolv", NULL); +- perror ("exec netresolv"); ++ execlp ("/usr/lib/netdiag/netresolv", "netresolv", NULL); ++ perror ("exec /usr/lib/netdiag/netresolv"); + exit (1); + } + close (msocket[0]); +@@ -2482,7 +2483,7 @@ void + int + tlocal (u_int32_t * addr) + { +- static unsigned char lhost[] = { 127, 0, 0, 1 }; ++ static unsigned char __attribute__((aligned(32))) lhost[] = { 127, 0, 0, 1 }; + u_int32_t *k = (u_int32_t *) netmask; + u_int32_t reslocal, restest; + if (*addr == *(u_int32_t *) lhost) +@@ -2678,7 +2679,7 @@ void + work->plog = open(nam,O_APPEND|O_WRONLY); + if (work->plog<0) + { +- work->plog = open(nam,O_APPEND|O_CREAT|O_WRONLY); ++ work->plog = open(nam,O_APPEND|O_CREAT|O_WRONLY, S_IRUSR|S_IWUSR); + st = write(work->plog,&starttime,sizeof(starttime)); + st = write(work->plog,&simmagic,sizeof(simmagic)); + } +@@ -3402,9 +3403,12 @@ void log_local(char *buf, int length) + } + + void +- handle_ip (struct ip *buf, int length, int direct) ++ handle_ip (struct ip *argbuf, int length, int direct) + { + int wlen; ++ struct ip bufstruct, *buf = &bufstruct; ++ ++ memcpy(buf, argbuf, sizeof(struct ip)); /* to fix unaligned accesses */ + new = time (0); + wlen = ntohs (buf->tot_len); + selprob = 40; +--- netdiag-1.0.orig/netwatch-1.0c/Makefile.in ++++ netdiag-1.0/netwatch-1.0c/Makefile.in +@@ -11,7 +11,7 @@ EXEC= netwatch netresolv + # CFLAGS= + DEFS= curs.h netwatch.h + OBJECTS= curs.o dispdata.o services.o netwatch.o processinetrc.o gh.o warning.o +-INSTALLDIR=/usr/bin ++INSTALLDIR=/usr + + all: $(EXEC) + +@@ -24,9 +24,9 @@ netwatch: $(OBJECTS) $(DEFS) + install: $(EXEC) + chown root.root $(EXEC) + chmod 700 $(EXEC) +- cp netwatch $(INSTALLDIR)/netwatch +- cp netresolv $(INSTALLDIR)/netresolv +- cp netwatch.1 /usr/man/man1 ++ cp netwatch $(INSTALLDIR)/sbin/netwatch ++ cp netresolv $(INSTALLDIR)/bin/netresolv ++ cp netwatch.1 $(INSTALLDIR)/share/man/man1 + + tar: + tar -C .. -czf ../netwatch-1.0c.src.tgz netwatch-1.0c +@@ -34,6 +34,10 @@ tar: + clean: + rm -f *~ *.o $(EXEC) config.h config.cache config.log config.status + ++# work round ARM GCC bug: builtin memcpy gets alignment wrong. ++netwatch.o: netwatch.c ++ $(CC) $(XCFLAGS) -c $(OLDLINUX) -fno-builtin-memcpy $< ++ + .c.o: + $(CC) $(XCFLAGS) -c $(OLDLINUX) $< + +--- netdiag-1.0.orig/netwatch-1.0c/dispdata.c ++++ netdiag-1.0/netwatch-1.0c/dispdata.c +@@ -12,6 +12,8 @@ + #include "netwatch.h" + #include "curs.h" + #include ++#include ++#include + + #ifdef NEWCURSES_SUPP + #include --- netdiag-1.1.orig/debian/patches/series +++ netdiag-1.1/debian/patches/series @@ -0,0 +1,7 @@ +netwatch.diff +statnet.diff +tcpblast.diff +tcpspray.diff +trafshow.diff +adapt_netload_to_bsd.diff +adaption_to_kfreebsd.diff --- netdiag-1.1.orig/debian/patches/statnet.diff +++ netdiag-1.1/debian/patches/statnet.diff @@ -0,0 +1,97 @@ +Description: Make program compile and work on Linux. +Author: Michael Meskes +--- netdiag-1.0.orig/statnet-3.8/statnet.c ++++ netdiag-1.0/statnet-3.8/statnet.c +@@ -12,6 +12,8 @@ + #include "curs.h" + #include + #include ++#include ++#include + #include + + #ifdef IPC_DIPC +@@ -187,7 +189,7 @@ main (int argc, char *argv[]) + if( errno == ENOENT ) fprintf( stderr, "Was \"statnetd -d\" run by root?\n" ); + exit (6); + } /* error, could not find shared memory segment */ +- if(( (char *)StatMem = (struct StatMemStruct *)shmat(shmid, 0, SHM_RDONLY) ) == (char *)-1) ++ if(( (char *)(StatMem = (struct StatMemStruct *)shmat(shmid, 0, SHM_RDONLY)) ) == (char *)-1) + { /* if error in attaching with read permission */ + perror ("Can't attach shared memory"); + exit (7); +@@ -360,7 +362,7 @@ main (int argc, char *argv[]) + Prev.sap_types.c_labels = (char *)sap_port_types[0]; + timeout( SN_UPDATE_SECS * 1000 ); + } /* do while no keystroke */ +- while ( ( in_char=getch() ) == ERR ); ++ while ( ( in_char=getch() ) == ERR && !shutdown_flag); + if( ( in_char ) != ERR ) + { /* if keystroke given */ + +--- netdiag-1.0.orig/statnet-3.8/statnetd.c ++++ netdiag-1.0/statnet-3.8/statnetd.c +@@ -14,6 +14,9 @@ + #include + #include + #include ++#include ++#include ++#include + + #include + #ifdef IPC_DIPC +@@ -261,7 +264,7 @@ main (int argc, char *argv[]) + } /* error, could not find shared memory segment */ + + } /* if it might already exist, use it */ +- if(( (char *)StatMem = (struct StatMemStruct *)shmat(shmid, 0, 0) ) == (char *)-1) ++ if(((char *)(StatMem = (struct StatMemStruct *)shmat(shmid, 0, 0)) ) == (char *)-1) + { /* if error in attaching with write permission */ + perror ("Can't attach shared memory"); + exit (7); +@@ -512,10 +515,12 @@ handle_other (unsigned char *buf, int le + } + + void +-handle_ip (struct ip *buf, int length) ++handle_ip (struct ip *argbuf, int length) + { + static int src_port, dest_port; ++ struct ip bufstruct, *buf = &bufstruct; + ++ memcpy(buf, argbuf, sizeof(struct ip)); /* to fix unaligned accesses */ + if (buf->ip_p < StatMem->ip_types.c_max) + { /* if IP protocol type is to be tallied */ + tally( buf->ip_p, &StatMem->ip_types ); /* count IP protocol */ +--- netdiag-1.0.orig/statnet-3.8/set_null.c ++++ netdiag-1.0/statnet-3.8/set_null.c +@@ -2,8 +2,8 @@ + /* Statnet is protected under the GNU Public License (GPL2). */ + /* Author: Jeroen Baekelandt (jeroenb@igwe.vub.ac.be) */ + +- + #include "stat.h" ++#include + + void + set_null ( struct StatMemStruct *StatMem ) +--- netdiag-1.0.orig/statnet-3.8/tally_init.c ++++ netdiag-1.0/statnet-3.8/tally_init.c +@@ -6,6 +6,7 @@ + /* This initializes a struct Tally item. */ + + #include ++#include + #include "stat.h" + + void tally_init ( struct Tally *ts, +--- netdiag-1.0.orig/statnet-3.8/statnet.1.proto ++++ netdiag-1.0/statnet-3.8/statnet.1.proto +@@ -1,5 +1,5 @@ + .\" "%W% %G%" +-.TH STATNET\ __SNVERSION__ 1 ++.TH STATNET 1 + .SH NAME + statnet,statnetd \- views the statistics of Ethernet and PLIP/PPP/SLIP for TCP, IP, + IPX, Appletalk, etc --- netdiag-1.1.orig/debian/patches/tcpblast.diff +++ netdiag-1.1/debian/patches/tcpblast.diff @@ -0,0 +1,77 @@ +Description: Make program compile and work on Linux. +Author: Michael Meskes +--- netdiag-1.0.orig/tcpblast-20011111/tcpblast.c ++++ netdiag-1.0/tcpblast-20011111/tcpblast.c +@@ -434,7 +434,7 @@ parse_rates(char *spec) { + + void + sndbuf(int f, int setbufsize, char *name) { +- int size=sizeof(int); /* getsockopt() should know how much space we have */ ++ socklen_t size=sizeof(int); /* getsockopt() should know how much space we have */ + + /* get/setsockopt doesn't return any error really for SO_SNDBUF, + at least on Linux; it limits the buffer to [2048..65536] +@@ -453,7 +453,8 @@ sndbuf(int f, int setbufsize, char *name + + void + setmaxseg(int f, int maxseg, char *name) { +- int currseg, size=sizeof(int); /* getsockopt() should know how much space we have */ ++ int currseg; ++ socklen_t size=sizeof(int); /* getsockopt() should know how much space we have */ + + if (getsockopt(f, IPPROTO_TCP, TCP_MAXSEG, (void *)&currseg, &size)==-1) + printf("%s getsockopt: %s", name, strerror(errno)); +--- netdiag-1.0.orig/tcpblast-20011111/Makefile.in ++++ netdiag-1.0/tcpblast-20011111/Makefile.in +@@ -23,7 +23,6 @@ + MAKEDEPEND = @MAKEDEPEND@ + RPMTDIR=$(HOME)/rpmdir + RH = /usr/src/redhat +-HOME=root@6bone-gw.6bone.pl:~ftp/pub/blast + + TARGET = tcpblast + TARGET2 = discard +@@ -62,7 +61,7 @@ + + install: all + $(SHTOOL) mkdir -f -p -m 755 $(sbindir) $(mandir)/man8 +- $(INSTALL) -s -c -m 755 $(TARGET) $(sbindir)/$(TARGET) ++ $(INSTALL) -c -m 755 $(TARGET) $(sbindir)/$(TARGET) + $(INSTALL) -c -m 644 docs/$(TARGET).8 $(mandir)/man8/$(TARGET).8 + echo Ignore error which may follow. + cd $(sbindir); ln -s tcpblast udpblast +--- netdiag-1.0.orig/tcpblast-20011111/docs/tcpblast.8 ++++ netdiag-1.0/tcpblast-20011111/docs/tcpblast.8 +@@ -1,8 +1,4 @@ + .rn '' }` +-''' $RCSfile$$Revision$$Date$ +-''' +-''' $Log$ +-''' + .de Sh + .br + .if t .Sp +@@ -31,12 +27,6 @@ + + .fi + .. +-''' +-''' +-''' Set up \*(-- to give an unbreakable dash; +-''' string Tr holds user defined translation string. +-''' Bell System Logo is used as a dummy character. +-''' + .tr \(*W-|\(bv\*(Tr + .ie n \{\ + .ds -- \(*W- +@@ -45,10 +35,6 @@ + .if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch + .ds L" "" + .ds R" "" +-''' \*(M", \*(S", \*(N" and \*(T" are the equivalent of +-''' \*(L" and \*(R", except that they are used on ".xx" lines, +-''' such as .IP and .SH, which do another additional levels of +-''' double-quote interpretation + .ds M" """ + .ds S" """ + .ds N" """"" --- netdiag-1.1.orig/debian/patches/tcpspray.diff +++ netdiag-1.1/debian/patches/tcpspray.diff @@ -0,0 +1,276 @@ +Description: Make tcspray work on Debian and add IPv6 +Author: Mats Erik Andersson +diff -Naur netdiag-1.0/tcpspray/Makefile netdiag-1.0/tcpspray/Makefile +--- netdiag-1.0/tcpspray/Makefile 1993-06-08 01:30:55.000000000 +0200 ++++ netdiag-1.0/tcpspray/Makefile 2011-02-12 10:41:49.000000000 +0100 +@@ -1,4 +1,4 @@ +-CFLAGS= -O2 -s -Dsun ++CFLAGS= -O2 -Dsun -DUSE_ADDRINFO=1 + BINDIR= /usr/local/etc + INSTALL= install -c + CC= gcc +diff -Naur netdiag-1.0/tcpspray/tcpspray.1 netdiag-1.0/tcpspray/tcpspray.1 +--- netdiag-1.0/tcpspray/tcpspray.1 1992-01-15 19:49:50.000000000 +0100 ++++ netdiag-1.0/tcpspray/tcpspray.1 2011-02-12 10:41:49.000000000 +0100 +@@ -67,7 +67,7 @@ + .BI \-d " delay" + Sets the time in microseconds to wait between successive buffer + transmissions. The default is no delay. +-.TP ++ + \".SH EXAMPLES + \".SH FILES + .SH SEE ALSO +diff -Naur netdiag-1.0/tcpspray/tcpspray.c netdiag-1.0/tcpspray/tcpspray.c +--- netdiag-1.0/tcpspray/tcpspray.c 1992-01-17 01:42:27.000000000 +0100 ++++ netdiag-1.0/tcpspray/tcpspray.c 2011-02-12 15:13:30.000000000 +0100 +@@ -14,18 +14,30 @@ + + #include + #include ++#include ++#include ++#include + +-#include ++#if USE_DECL_MALLOC ++#include /* is obsolete; suffices */ ++#endif + + #include + #include + #include ++#include ++#include + + #include ++#include /* inet_addr */ + + #define DEFBLKSIZE 1024 /* default blocksize is 1k */ + #define DEFNBLKS 100 /* default number of blocks is 100 */ + ++#ifndef USE_ADDRINFO ++# define USE_ADDRINFO 0 ++#endif ++ + extern char *optarg; /* external vars used by getopt(3) */ + extern int optind, opterr; + +@@ -44,8 +56,9 @@ + static void usage __ARGS((char *argv[])); /* forward declaration */ + + +-#if !defined(sun) && !defined(_AIX) /* sunos and aix define pid_t, */ +- /* do others? */ ++#if !defined(sun) && !defined(_AIX) && !defined(__GLIBC__) \ ++ && !defined(__OpenBSD__) && !defined(__FreeBSD__) ++ /* sunos and aix define pid_t, do others? */ + typedef int pid_t; + #endif + +@@ -72,7 +85,8 @@ + + struct timeval start, end; /* used to store start and end time of I/O */ + +-#ifndef sun ++#if !defined(sun) && !defined(__GLIBC__) \ ++ && !defined(__OpenBSD__) && !defined(__FreeBSD__) + struct timeval timeout; /* used for timeout in select call */ + #endif /*sun*/ + +@@ -83,9 +97,15 @@ + + int c; /* used to return options from getopt(3) */ + ++#if !USE_ADDRINFO + struct sockaddr_in sin; /* sockaddr for socket */ + struct hostent *hp; /* hostent for host name lookups */ + struct servent *serv; /* service entry for port lookup */ ++#else /* USE_ADDRINFO */ ++ struct addrinfo hints, *ai, *res; /* resolving with getaddrinfo(3) */ ++ ++ int err; /* return value from getaddrinfo(3) */ ++#endif /* USE_ADDRINFO */ + + int sock; /* socket descriptor */ + int fd[2]; /* descriptors for pipe */ +@@ -98,7 +118,7 @@ + register char *buf; /* input and output buffer (malloced) */ + register char *bufp; /* placeholder pointer */ + +- FILE *infile; /* used to preload buffer */ ++ FILE *infile = NULL; /* used to preload buffer */ + + while ((c = getopt(argc, argv, "vehb:n:f:d:")) != -1) { + switch (c) { +@@ -132,7 +152,8 @@ + + case 'd': + delay = atoi(optarg); +-#ifndef sun ++#if !defined(sun) && !defined(__GLIBC__) \ ++ && !defined(__OpenBSD__) && !defined(__FreeBSD__) + /* we need to fake usleep() with select() on non-sun machines */ + + timeout.tv_usec = atoi(optarg) ; +@@ -150,6 +171,7 @@ + if ((argc - optind) != 1) /* we better have a host name */ + usage(argv); + ++#if !USE_ADDRINFO + if ((sock = socket(AF_INET, SOCK_STREAM, 0)) == -1) { + perror("socket"); + exit(1); +@@ -157,8 +179,11 @@ + + bzero((char *) &sin, sizeof(sin)); + sin.sin_family = AF_INET; ++#if defined(__OpenBSD__) || defined(__FreeBSD__) ++ sin.sin_len = sizeof(sin); ++#endif + +- if (bind(sock, &sin, sizeof (sin)) == -1) { ++ if (bind(sock, (struct sockaddr *)&sin, sizeof (sin)) == -1) { + perror("bind"); + exit(1); + } +@@ -184,10 +209,48 @@ + serv = getservbyname(eflag ? "echo" : "discard", "tcp"); /* get port */ + sin.sin_port = serv->s_port; + +- if (connect(sock, &sin, sizeof(sin)) == -1) { ++ if (connect(sock, (struct sockaddr *)&sin, sizeof(sin)) == -1) { + perror("connect"); + exit(1); + } ++#else /* USE_ADDRINFO */ ++ memset(&hints, 0, sizeof(hints)); ++ hints.ai_family = AF_UNSPEC; ++ hints.ai_socktype = SOCK_STREAM; ++ hints.ai_protocol = IPPROTO_TCP; /* FreeBSD offers also "echo/ddp" */ ++# ifdef AI_ADDRCONFIG ++ hints.ai_flags = AI_ADDRCONFIG; ++# endif ++ ++ err = getaddrinfo(argv[optind], eflag ? "echo" : "discard", &hints, &res); ++ if (err) { ++ fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(err)); ++ exit(1); ++ } ++ ++ for (ai = res; ai; ai = ai->ai_next) { ++ sock = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol); ++ if (sock < 0) ++ continue; ++ ++ if (connect(sock, ai->ai_addr, ai->ai_addrlen)) { ++ close(sock); ++ sock = -1; ++ continue; ++ } ++ ++ /* Success */ ++ break; ++ } ++ ++ if (res) ++ freeaddrinfo(res); ++ ++ if (ai == NULL) { ++ fprintf(stderr, "host not responding: %s\n", argv[optind]); ++ exit(1); ++ } ++#endif /* USE_ADDRINFO */ + + nbytes = nblks * blksize; /* number of bytes to send/receive */ + +@@ -220,10 +283,18 @@ + exit(1); + } + } +- if (eflag && pid != 0) { /* we are the receiver */ ++ if (eflag && (pid != 0)) { /* we are the receiver */ + close (fd[1]); + bytes_left = nblks * blksize; + ++ /* The buffer was invalidated at forking time. ++ * We must get a new buffer for receiving ++ * transmitted data. */ ++ if ((buf = malloc((blksize < 4096) ? 4096 : blksize)) == NULL) { ++ perror("malloc buf"); ++ exit(1); ++ } ++ + if (gettimeofday(&start, NULL) == -1) { + perror("gettimeofday"); + exit(1); +@@ -234,6 +305,8 @@ + while (bytes_left) { + if ((cnt = read(sock, buf, bytes_left)) == -1) { + perror("receive:"); ++ kill(pid, SIGTERM); ++ wait(NULL); + exit(2); + } + +@@ -261,6 +334,8 @@ + + if ((cnt = read(sock, buf, bytes_left)) == -1) { + perror("receive:"); ++ kill(pid, SIGTERM); ++ wait(NULL); + exit(2); + } + bytes_left -= cnt; +@@ -268,12 +343,14 @@ + } + if (gettimeofday(&end, NULL) == -1) { + perror("gettimeofday"); +- _exit(1); ++ exit(1); + } + } + + delta = (double) (end.tv_sec - start.tv_sec) + (double) + ((double) (end.tv_usec - start.tv_usec) / 1000000.0); ++ if (vflag) ++ putchar('\n'); + printf("Received %d bytes in %f seconds (%0.3f kbytes/s)\n", + nbytes, delta, (double) (nbytes / delta) /1024); + +@@ -315,7 +392,8 @@ + bufp += cnt; + bytes_left -= cnt; + +-#ifdef sun ++#if defined(sun) || defined(__GLIBC__) \ ++ || defined(__OpenBSD__) || defined(__FreeBSD__) + if (delay) + usleep(delay); + #else /*sun*/ +@@ -351,7 +429,8 @@ + bufp += cnt; + bytes_left -= cnt; + +-#ifdef sun ++#if defined(sun) || defined(__GLIBC__) \ ++ || defined(__OpenBSD__) || defined(__FreeBSD__) + if (delay) + usleep(delay); + #else /*sun*/ +@@ -379,10 +458,12 @@ + } + exit(0); + } +- else +- +- printf("\nTransmitted %d bytes in %f seconds (%0.3f kbytes/s)\n", ++ else { ++ if (vflag) ++ putchar('\n'); ++ printf("Transmitted %d bytes in %f seconds (%0.3f kbytes/s)\n", + nbytes, delta, (double) (nbytes / delta) / 1024); ++ } + + } + --- netdiag-1.1.orig/debian/patches/trafshow.diff +++ netdiag-1.1/debian/patches/trafshow.diff @@ -0,0 +1,11841 @@ +Description: Make program compile and work on Linux. +Author: Michael Meskes +--- netdiag-1.0.orig/trafshow-5.2.3/configure ++++ netdiag-1.0/trafshow-5.2.3/configure +@@ -1,25 +1,54 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59. ++# Generated by GNU Autoconf 2.61. + # +-# Copyright (C) 2003 Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -29,8 +58,43 @@ else + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -44,18 +108,19 @@ do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -63,157 +128,388 @@ fi + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. + fi + ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in ++ case $as_dir in + /*) +- if ("$as_dir/$as_base" -c ' ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || ++ chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -222,7 +518,28 @@ else + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -231,39 +548,27 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH + ++exec 7<&0 &1 + + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 +- + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} +- + # Identity of this package. + PACKAGE_NAME= + PACKAGE_TARNAME= +@@ -275,42 +580,122 @@ ac_unique_file="trafshow.c" + # Factoring default headers for most tests. + ac_includes_default="\ + #include +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include + # include + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include + # endif + # include + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include +-#else +-# if HAVE_STDINT_H +-# include +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H + # include + #endif" + +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT YACC LEX LEXLIB LEX_OUTPUT_ROOT CPP EGREP acx_pthread_config PTHREAD_CC PTHREAD_LIBS PTHREAD_CFLAGS LIBOBJS LTLIBOBJS' ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++target ++target_cpu ++target_vendor ++target_os ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++YACC ++YFLAGS ++LEX ++LEX_OUTPUT_ROOT ++LEXLIB ++CPP ++GREP ++EGREP ++acx_pthread_config ++PTHREAD_CC ++PTHREAD_LIBS ++PTHREAD_CFLAGS ++LIBOBJS ++LTLIBOBJS' + ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++YACC ++YFLAGS ++CPP' ++ + + # Initialize some variables set by options. + ac_init_help= +@@ -337,34 +722,48 @@ x_libraries=NONE + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -386,33 +785,45 @@ do + --config-cache | -C) + cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -439,6 +850,12 @@ do + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -463,13 +880,16 @@ do + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -534,6 +954,16 @@ do + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -586,24 +1016,20 @@ do + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -634,8 +1060,7 @@ Try \`$0 --help' for more information." + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) +@@ -655,27 +1080,19 @@ if test -n "$ac_prev"; then + { (exit 1); exit 1; }; } + fi + +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; +- esac +-done +- +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var + case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -702,74 +1119,76 @@ test -n "$host_alias" && ac_tool_prefix= + test "$silent" = yes && exec 6>/dev/null + + ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X"$0" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 +- { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +- fi + fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -798,9 +1217,6 @@ Configuration: + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +-_ACEOF +- +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] +@@ -818,15 +1234,22 @@ Fine tuning of the installation director + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -847,126 +1270,100 @@ Some influential environment variables: + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory +- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have +- headers in a nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory ++ YACC The `Yet Another C Compiler' implementation to use. Defaults to ++ the first program found out of: `bison -y', `byacc', `yacc'. ++ YFLAGS The list of arguments that will be passed by default to $YACC. ++ This script will default YFLAGS to the empty string to avoid a ++ default value of `-d' given by some make applications. + CPP C preprocessor + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + + _ACEOF ++ac_status=$? + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || continue + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd "$ac_popdir" ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done + fi + +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF ++configure ++generated by GNU Autoconf 2.61 + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -985,7 +1382,7 @@ uname -v = `(uname -v) 2>/dev/null || ec + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -999,6 +1396,7 @@ do + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" + done ++IFS=$as_save_IFS + + } >&5 + +@@ -1020,7 +1418,6 @@ _ACEOF + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1031,7 +1428,7 @@ do + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +@@ -1053,9 +1450,7 @@ do + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +@@ -1066,8 +1461,8 @@ $as_unset ac_configure_args1 || test "${ + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { +@@ -1080,20 +1475,34 @@ trap 'exit_status=$? + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( + *) +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo + + cat <<\_ASBOX +@@ -1104,22 +1513,28 @@ _ASBOX + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -1131,26 +1546,24 @@ _ASBOX + ## ----------- ## + _ASBOX + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + + # Predefined preprocessor variables. + +@@ -1181,14 +1594,17 @@ _ACEOF + + # Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in $CONFIG_SITE; do ++shift ++for ac_site_file ++do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + echo "$as_me: loading site script $ac_site_file" >&6;} +@@ -1204,8 +1620,8 @@ if test -r "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 + echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +@@ -1217,12 +1633,11 @@ fi + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +@@ -1247,8 +1662,7 @@ echo "$as_me: current value: $ac_new_v + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -1265,12 +1679,6 @@ echo "$as_me: error: run \`make distclea + { (exit 1); exit 1; }; } + fi + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- + + + +@@ -1287,110 +1695,165 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +- ac_config_headers="$ac_config_headers config.h" ++ac_config_headers="$ac_config_headers config.h" + + + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Make sure we can run config.sub. +-$ac_config_sub sun4 >/dev/null 2>&1 || +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;} ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-echo "$as_me:$LINENO: checking build system type" >&5 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_build_alias=$build_alias +-test -z "$ac_cv_build_alias" && +- ac_cv_build_alias=`$ac_config_guess` +-test -z "$ac_cv_build_alias" && ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-echo "${ECHO_T}$ac_cv_build" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + build=$ac_cv_build +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking host system type" >&5 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_host_alias=$host_alias +-test -z "$ac_cv_host_alias" && +- ac_cv_host_alias=$ac_cv_build_alias +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-echo "${ECHO_T}$ac_cv_host" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + host=$ac_cv_host +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking target system type" >&5 +-echo $ECHO_N "checking target system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking target system type" >&5 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; } + if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_target_alias=$target_alias +-test "x$ac_cv_target_alias" = "x" && +- ac_cv_target_alias=$ac_cv_host_alias +-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} ++ if test "x$target_alias" = x; then ++ ac_cv_target=$ac_cv_host ++else ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +-echo "${ECHO_T}$ac_cv_target" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 ++echo "${ECHO_T}$ac_cv_target" >&6; } ++case $ac_cv_target in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 ++echo "$as_me: error: invalid value of canonical target" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + target=$ac_cv_target +-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_target ++shift ++target_cpu=$1 ++target_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++target_os=$* ++IFS=$ac_save_IFS ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + + # The aliases save the names the user supplied, while $host etc. +@@ -1408,8 +1871,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1422,32 +1885,34 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1460,36 +1925,51 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1502,74 +1982,34 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1583,7 +2023,7 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue +@@ -1594,6 +2034,7 @@ do + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -1611,22 +2052,23 @@ fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1639,36 +2081,38 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1681,29 +2125,45 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi +@@ -1716,21 +2176,35 @@ See \`config.log' for more details." >&2 + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -1755,47 +2229,77 @@ ac_clean_files="$ac_clean_files a.out a. + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +@@ -1807,19 +2311,21 @@ See \`config.log' for more details." >&2 + fi + + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 + +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -1838,22 +2344,27 @@ See \`config.log' for more details." >&2 + fi + fi + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +@@ -1864,9 +2375,8 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- export ac_cv_exeext + break;; + * ) break;; + esac +@@ -1880,14 +2390,14 @@ See \`config.log' for more details." >&2 + fi + + rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1907,14 +2417,20 @@ main () + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +@@ -1932,12 +2448,12 @@ fi + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1960,49 +2476,49 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } + GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -2018,37 +2534,118 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -2064,12 +2661,12 @@ else + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2103,12 +2700,17 @@ static char *f (char * (*g) (char **, in + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -2123,215 +2725,71 @@ return f (e, argv, 0) != argv[0] || f + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC + + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++for ac_prog in 'bison -y' byacc + do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-#include +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-continue +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h +-fi +- +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +-for ac_prog in 'bison -y' byacc +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_YACC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_YACC+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -n "$YACC"; then + ac_cv_prog_YACC="$YACC" # Let the user override the test. +@@ -2342,25 +2800,27 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_YACC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + YACC=$ac_cv_prog_YACC + if test -n "$YACC"; then +- echo "$as_me:$LINENO: result: $YACC" >&5 +-echo "${ECHO_T}$YACC" >&6 ++ { echo "$as_me:$LINENO: result: $YACC" >&5 ++echo "${ECHO_T}$YACC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$YACC" && break + done + test -n "$YACC" || YACC="yacc" +@@ -2370,8 +2830,8 @@ for ac_prog in flex lex + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_LEX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2384,250 +2844,182 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LEX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + LEX=$ac_cv_prog_LEX + if test -n "$LEX"; then +- echo "$as_me:$LINENO: result: $LEX" >&5 +-echo "${ECHO_T}$LEX" >&6 ++ { echo "$as_me:$LINENO: result: $LEX" >&5 ++echo "${ECHO_T}$LEX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$LEX" && break + done + test -n "$LEX" || LEX=":" + +-if test -z "$LEXLIB" +-then +- echo "$as_me:$LINENO: checking for yywrap in -lfl" >&5 +-echo $ECHO_N "checking for yywrap in -lfl... $ECHO_C" >&6 +-if test "${ac_cv_lib_fl_yywrap+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lfl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" ++if test "x$LEX" != "x:"; then ++ cat >conftest.l <<_ACEOF ++%% ++a { ECHO; } ++b { REJECT; } ++c { yymore (); } ++d { yyless (1); } ++e { yyless (input () != 0); } ++f { unput (yytext[0]); } ++. { BEGIN INITIAL; } ++%% ++#ifdef YYTEXT_POINTER ++extern char *yytext; + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char yywrap (); + int +-main () ++main (void) + { +-yywrap (); +- ; +- return 0; ++ return ! yylex () + ! yywrap (); + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++{ (ac_try="$LEX conftest.l" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$LEX conftest.l") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_fl_yywrap=yes ++ (exit $ac_status); } ++{ echo "$as_me:$LINENO: checking lex output file root" >&5 ++echo $ECHO_N "checking lex output file root... $ECHO_C" >&6; } ++if test "${ac_cv_prog_lex_root+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_fl_yywrap=no ++if test -f lex.yy.c; then ++ ac_cv_prog_lex_root=lex.yy ++elif test -f lexyy.c; then ++ ac_cv_prog_lex_root=lexyy ++else ++ { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 ++echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} ++ { (exit 1); exit 1; }; } + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_fl_yywrap" >&5 +-echo "${ECHO_T}$ac_cv_lib_fl_yywrap" >&6 +-if test $ac_cv_lib_fl_yywrap = yes; then +- LEXLIB="-lfl" +-else +- echo "$as_me:$LINENO: checking for yywrap in -ll" >&5 +-echo $ECHO_N "checking for yywrap in -ll... $ECHO_C" >&6 +-if test "${ac_cv_lib_l_yywrap+set}" = set; then ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 ++echo "${ECHO_T}$ac_cv_prog_lex_root" >&6; } ++LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root ++ ++if test -z "${LEXLIB+set}"; then ++ { echo "$as_me:$LINENO: checking lex library" >&5 ++echo $ECHO_N "checking lex library... $ECHO_C" >&6; } ++if test "${ac_cv_lib_lex+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ll $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char yywrap (); +-int +-main () +-{ +-yywrap (); +- ; +- return 0; +-} ++ ac_save_LIBS=$LIBS ++ ac_cv_lib_lex='none needed' ++ for ac_lib in '' -lfl -ll; do ++ LIBS="$ac_lib $ac_save_LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++`cat $LEX_OUTPUT_ROOT.c` + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_l_yywrap=yes ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_lex=$ac_lib + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_l_yywrap=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_l_yywrap" >&5 +-echo "${ECHO_T}$ac_cv_lib_l_yywrap" >&6 +-if test $ac_cv_lib_l_yywrap = yes; then +- LEXLIB="-ll" +-fi + + fi + +-fi ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ test "$ac_cv_lib_lex" != 'none needed' && break ++ done ++ LIBS=$ac_save_LIBS + +-if test "x$LEX" != "x:"; then +- echo "$as_me:$LINENO: checking lex output file root" >&5 +-echo $ECHO_N "checking lex output file root... $ECHO_C" >&6 +-if test "${ac_cv_prog_lex_root+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- # The minimal lex program is just a single line: %%. But some broken lexes +-# (Solaris, I think it was) want two %% lines, so accommodate them. +-cat >conftest.l <<_ACEOF +-%% +-%% +-_ACEOF +-{ (eval echo "$as_me:$LINENO: \"$LEX conftest.l\"") >&5 +- (eval $LEX conftest.l) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-if test -f lex.yy.c; then +- ac_cv_prog_lex_root=lex.yy +-elif test -f lexyy.c; then +- ac_cv_prog_lex_root=lexyy +-else +- { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 +-echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} +- { (exit 1); exit 1; }; } + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_lex" >&5 ++echo "${ECHO_T}$ac_cv_lib_lex" >&6; } ++ test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 +-echo "${ECHO_T}$ac_cv_prog_lex_root" >&6 +-rm -f conftest.l +-LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + +-echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 +-echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6 ++ ++{ echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 ++echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6; } + if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # POSIX says lex can declare yytext either as a pointer or an array; the +-# default is implementation-dependent. Figure out which it is, since ++# default is implementation-dependent. Figure out which it is, since + # not all implementations provide the %pointer and %array declarations. + ac_cv_prog_lex_yytext_pointer=no +-echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c + ac_save_LIBS=$LIBS +-LIBS="$LIBS $LEXLIB" ++LIBS="$LEXLIB $ac_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF ++#define YYTEXT_POINTER 1 + `cat $LEX_OUTPUT_ROOT.c` + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_prog_lex_yytext_pointer=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_save_LIBS +-rm -f "${LEX_OUTPUT_ROOT}.c" + + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 +-echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 ++echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6; } + if test $ac_cv_prog_lex_yytext_pointer = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -2635,6 +3027,7 @@ cat >>confdefs.h <<\_ACEOF + _ACEOF + + fi ++rm -f conftest.l $LEX_OUTPUT_ROOT.c + + fi + ac_ext=c +@@ -2642,8 +3035,8 @@ ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= +@@ -2677,24 +3070,22 @@ cat >>conftest.$ac_ext <<_ACEOF + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -2703,9 +3094,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2715,24 +3107,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -2743,6 +3133,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -2760,8 +3151,8 @@ fi + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -2784,24 +3175,22 @@ cat >>conftest.$ac_ext <<_ACEOF + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -2810,9 +3199,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2822,24 +3212,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -2850,6 +3238,7 @@ sed 's/^/| /' conftest.$ac_ext >&5 + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -2873,24 +3262,171 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count ++ fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; ++*) ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break ++ done ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; ++esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ ++else ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ ++ fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" + + + +-echo "$as_me:$LINENO: checking for AIX" >&5 +-echo $ECHO_N "checking for AIX... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for AIX" >&5 ++echo $ECHO_N "checking for AIX... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -2904,15 +3440,15 @@ cat >>conftest.$ac_ext <<_ACEOF + _ACEOF + if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + cat >>confdefs.h <<\_ACEOF + #define _ALL_SOURCE 1 + _ACEOF + + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + rm -f conftest* + +@@ -2920,7 +3456,6 @@ rm -f conftest* + + + +- + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +@@ -2941,8 +3476,8 @@ if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + save_LIBS="$LIBS" + LIBS="$PTHREAD_LIBS $LIBS" +- echo "$as_me:$LINENO: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5 +-echo $ECHO_N "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5 ++echo $ECHO_N "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -2950,52 +3485,51 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char pthread_join (); + int + main () + { +-pthread_join (); ++return pthread_join (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + acx_pthread_ok=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +- echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5 +-echo "${ECHO_T}$acx_pthread_ok" >&6 ++ { echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5 ++echo "${ECHO_T}$acx_pthread_ok" >&6; } + if test x"$acx_pthread_ok" = xno; then + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" +@@ -3055,21 +3589,21 @@ for flag in $acx_pthread_flags; do + + case $flag in + none) +- echo "$as_me:$LINENO: checking whether pthreads work without any flags" >&5 +-echo $ECHO_N "checking whether pthreads work without any flags... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether pthreads work without any flags" >&5 ++echo $ECHO_N "checking whether pthreads work without any flags... $ECHO_C" >&6; } + ;; + + -*) +- echo "$as_me:$LINENO: checking whether pthreads work with $flag" >&5 +-echo $ECHO_N "checking whether pthreads work with $flag... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking whether pthreads work with $flag" >&5 ++echo $ECHO_N "checking whether pthreads work with $flag... $ECHO_C" >&6; } + PTHREAD_CFLAGS="$flag" + ;; + + pthread-config) + # Extract the first word of "pthread-config", so it can be a program name with args. + set dummy pthread-config; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_acx_pthread_config+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3082,34 +3616,36 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_acx_pthread_config="yes" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_prog_acx_pthread_config" && ac_cv_prog_acx_pthread_config="no" + fi + fi + acx_pthread_config=$ac_cv_prog_acx_pthread_config + if test -n "$acx_pthread_config"; then +- echo "$as_me:$LINENO: result: $acx_pthread_config" >&5 +-echo "${ECHO_T}$acx_pthread_config" >&6 ++ { echo "$as_me:$LINENO: result: $acx_pthread_config" >&5 ++echo "${ECHO_T}$acx_pthread_config" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + if test x"$acx_pthread_config" = xno; then continue; fi + PTHREAD_CFLAGS="`pthread-config --cflags`" + PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" + ;; + + *) +- echo "$as_me:$LINENO: checking for the pthreads library -l$flag" >&5 +-echo $ECHO_N "checking for the pthreads library -l$flag... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for the pthreads library -l$flag" >&5 ++echo $ECHO_N "checking for the pthreads library -l$flag... $ECHO_C" >&6; } + PTHREAD_LIBS="-l$flag" + ;; + esac +@@ -3146,40 +3682,39 @@ pthread_t th; pthread_join(th, 0); + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + acx_pthread_ok=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + +- echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5 +-echo "${ECHO_T}$acx_pthread_ok" >&6 ++ { echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5 ++echo "${ECHO_T}$acx_pthread_ok" >&6; } + if test "x$acx_pthread_ok" = xyes; then + break; + fi +@@ -3198,8 +3733,8 @@ if test "x$acx_pthread_ok" = xyes; then + + # Detect AIX lossage: threads are created detached by default + # and the JOINABLE attribute has a nonstandard name (UNDETACHED). +- echo "$as_me:$LINENO: checking for joinable pthread attribute" >&5 +-echo $ECHO_N "checking for joinable pthread attribute... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for joinable pthread attribute" >&5 ++echo $ECHO_N "checking for joinable pthread attribute... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -3216,34 +3751,32 @@ int attr=PTHREAD_CREATE_JOINABLE; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ok=PTHREAD_CREATE_JOINABLE + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ok=unknown ++ ok=unknown + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + if test x"$ok" = xunknown; then + cat >conftest.$ac_ext <<_ACEOF +@@ -3262,34 +3795,32 @@ int attr=PTHREAD_CREATE_UNDETACHED; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ok=PTHREAD_CREATE_UNDETACHED + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ok=unknown ++ ok=unknown + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi + if test x"$ok" != xPTHREAD_CREATE_JOINABLE; then +@@ -3299,23 +3830,23 @@ cat >>confdefs.h <<\_ACEOF + _ACEOF + + fi +- echo "$as_me:$LINENO: result: ${ok}" >&5 +-echo "${ECHO_T}${ok}" >&6 ++ { echo "$as_me:$LINENO: result: ${ok}" >&5 ++echo "${ECHO_T}${ok}" >&6; } + if test x"$ok" = xunknown; then + { echo "$as_me:$LINENO: WARNING: we do not know how to create joinable pthreads" >&5 + echo "$as_me: WARNING: we do not know how to create joinable pthreads" >&2;} + fi + +- echo "$as_me:$LINENO: checking if more special flags are required for pthreads" >&5 +-echo $ECHO_N "checking if more special flags are required for pthreads... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking if more special flags are required for pthreads" >&5 ++echo $ECHO_N "checking if more special flags are required for pthreads... $ECHO_C" >&6; } + flag=no + case "${host_cpu}-${host_os}" in + *-aix* | *-freebsd*) flag="-D_THREAD_SAFE";; + *solaris*) flag="-D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT";; + *-osf* | *-hpux*) flag="-D_REENTRANT";; + esac +- echo "$as_me:$LINENO: result: ${flag}" >&5 +-echo "${ECHO_T}${flag}" >&6 ++ { echo "$as_me:$LINENO: result: ${flag}" >&5 ++echo "${ECHO_T}${flag}" >&6; } + if test "x$flag" != xno; then + PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS" + fi +@@ -3326,8 +3857,8 @@ echo "${ECHO_T}${flag}" >&6 + # More AIX lossage: must compile with cc_r + # Extract the first word of "cc_r", so it can be a program name with args. + set dummy cc_r; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_PTHREAD_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3340,26 +3871,28 @@ do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_PTHREAD_CC="cc_r" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + test -z "$ac_cv_prog_PTHREAD_CC" && ac_cv_prog_PTHREAD_CC="${CC}" + fi + fi + PTHREAD_CC=$ac_cv_prog_PTHREAD_CC + if test -n "$PTHREAD_CC"; then +- echo "$as_me:$LINENO: result: $PTHREAD_CC" >&5 +-echo "${ECHO_T}$PTHREAD_CC" >&6 ++ { echo "$as_me:$LINENO: result: $PTHREAD_CC" >&5 ++echo "${ECHO_T}$PTHREAD_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + else + PTHREAD_CC="$CC" + fi +@@ -3390,8 +3923,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3415,34 +3948,31 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -3498,6 +4028,7 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include ++#include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -3517,18 +4048,27 @@ main () + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -3541,12 +4081,14 @@ sed 's/^/| /' conftest.$ac_ext >&5 + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -3555,8 +4097,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 +-echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 ++echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; } + if test "${ac_cv_header_time+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3580,37 +4122,34 @@ return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_header_time=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_time=no ++ ac_cv_header_time=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 +-echo "${ECHO_T}$ac_cv_header_time" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 ++echo "${ECHO_T}$ac_cv_header_time" >&6; } + if test $ac_cv_header_time = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -3633,9 +4172,9 @@ for ac_header in sys/types.h sys/stat.h + inttypes.h stdint.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -3649,37 +4188,35 @@ $ac_includes_default + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_Header=no" ++ eval "$as_ac_Header=no" + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +@@ -3697,18 +4234,19 @@ done + for ac_header in sys/termios.h net/if_dl.h paths.h resolv.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -3719,40 +4257,37 @@ $ac_includes_default + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -3761,24 +4296,22 @@ cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -3786,9 +4319,10 @@ sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -3812,25 +4346,19 @@ echo "$as_me: WARNING: $ac_header: s + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -3843,8 +4371,8 @@ fi + done + + +-echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +-echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 ++echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; } + if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3862,10 +4390,10 @@ main () + #ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; +- const charset x; ++ const charset cs; + /* SunOS 4.1.1 cc rejects this. */ +- char const *const *ccp; +- char **p; ++ char const *const *pcpcc; ++ char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; +@@ -3874,16 +4402,17 @@ main () + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; +- ccp = &g + (g ? g-g : 0); ++ pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ +- ++ccp; +- p = (char**) ccp; +- ccp = (char const *const *) p; ++ ++pcpcc; ++ ppc = (char**) pcpcc; ++ pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; ++ if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; +@@ -3902,7 +4431,9 @@ main () + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; ++ if (!foo) return 0; + } ++ return !cs[0] && !zero.x; + #endif + + ; +@@ -3910,37 +4441,34 @@ main () + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_c_const=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_c_const=no ++ ac_cv_c_const=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +-echo "${ECHO_T}$ac_cv_c_const" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 ++echo "${ECHO_T}$ac_cv_c_const" >&6; } + if test $ac_cv_c_const = no; then + + cat >>confdefs.h <<\_ACEOF +@@ -3949,8 +4477,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for u_int8_t" >&5 +-echo $ECHO_N "checking for u_int8_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for u_int8_t" >&5 ++echo $ECHO_N "checking for u_int8_t... $ECHO_C" >&6; } + if test "${ac_cv_type_u_int8_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3961,49 +4489,47 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef u_int8_t ac__type_new_; + int + main () + { +-if ((u_int8_t *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (u_int8_t)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_type_u_int8_t=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_u_int8_t=no ++ ac_cv_type_u_int8_t=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_u_int8_t" >&5 +-echo "${ECHO_T}$ac_cv_type_u_int8_t" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int8_t" >&5 ++echo "${ECHO_T}$ac_cv_type_u_int8_t" >&6; } + if test $ac_cv_type_u_int8_t = yes; then + : + else +@@ -4014,8 +4540,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for u_int16_t" >&5 +-echo $ECHO_N "checking for u_int16_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for u_int16_t" >&5 ++echo $ECHO_N "checking for u_int16_t... $ECHO_C" >&6; } + if test "${ac_cv_type_u_int16_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4026,49 +4552,47 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef u_int16_t ac__type_new_; + int + main () + { +-if ((u_int16_t *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (u_int16_t)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_type_u_int16_t=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_u_int16_t=no ++ ac_cv_type_u_int16_t=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_u_int16_t" >&5 +-echo "${ECHO_T}$ac_cv_type_u_int16_t" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int16_t" >&5 ++echo "${ECHO_T}$ac_cv_type_u_int16_t" >&6; } + if test $ac_cv_type_u_int16_t = yes; then + : + else +@@ -4079,8 +4603,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for u_int32_t" >&5 +-echo $ECHO_N "checking for u_int32_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for u_int32_t" >&5 ++echo $ECHO_N "checking for u_int32_t... $ECHO_C" >&6; } + if test "${ac_cv_type_u_int32_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4091,49 +4615,47 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef u_int32_t ac__type_new_; + int + main () + { +-if ((u_int32_t *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (u_int32_t)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_type_u_int32_t=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_u_int32_t=no ++ ac_cv_type_u_int32_t=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_u_int32_t" >&5 +-echo "${ECHO_T}$ac_cv_type_u_int32_t" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int32_t" >&5 ++echo "${ECHO_T}$ac_cv_type_u_int32_t" >&6; } + if test $ac_cv_type_u_int32_t = yes; then + : + else +@@ -4144,8 +4666,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for u_int64_t" >&5 +-echo $ECHO_N "checking for u_int64_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for u_int64_t" >&5 ++echo $ECHO_N "checking for u_int64_t... $ECHO_C" >&6; } + if test "${ac_cv_type_u_int64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4156,49 +4678,47 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + $ac_includes_default ++typedef u_int64_t ac__type_new_; + int + main () + { +-if ((u_int64_t *) 0) ++if ((ac__type_new_ *) 0) + return 0; +-if (sizeof (u_int64_t)) ++if (sizeof (ac__type_new_)) + return 0; + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_type_u_int64_t=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_u_int64_t=no ++ ac_cv_type_u_int64_t=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_u_int64_t" >&5 +-echo "${ECHO_T}$ac_cv_type_u_int64_t" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_u_int64_t" >&5 ++echo "${ECHO_T}$ac_cv_type_u_int64_t" >&6; } + if test $ac_cv_type_u_int64_t = yes; then + : + else +@@ -4210,8 +4730,8 @@ _ACEOF + fi + + +-echo "$as_me:$LINENO: checking for in_addr_t" >&5 +-echo $ECHO_N "checking for in_addr_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for in_addr_t" >&5 ++echo $ECHO_N "checking for in_addr_t... $ECHO_C" >&6; } + if test "${ac_cv_type_in_addr_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4234,39 +4754,36 @@ in_addr_t ipaddr + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_type_in_addr_t="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_in_addr_t="unsigned int" ++ ac_cv_type_in_addr_t="unsigned int" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_in_addr_t" >&5 +-echo "${ECHO_T}$ac_cv_type_in_addr_t" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_in_addr_t" >&5 ++echo "${ECHO_T}$ac_cv_type_in_addr_t" >&6; } + if test "$ac_cv_type_in_addr_t" != yes; then + cat >>confdefs.h <<_ACEOF + #define in_addr_t $ac_cv_type_in_addr_t +@@ -4274,8 +4791,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for socklen_t" >&5 +-echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for socklen_t" >&5 ++echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6; } + if test "${ac_cv_type_socklen_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4299,39 +4816,36 @@ socklen_t slen + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_type_socklen_t="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_type_socklen_t="int" ++ ac_cv_type_socklen_t="int" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5 +-echo "${ECHO_T}$ac_cv_type_socklen_t" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_type_socklen_t" >&5 ++echo "${ECHO_T}$ac_cv_type_socklen_t" >&6; } + if test "$ac_cv_type_socklen_t" != yes; then + cat >>confdefs.h <<_ACEOF + #define socklen_t $ac_cv_type_socklen_t +@@ -4339,8 +4853,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for struct sockaddr_storage" >&5 +-echo $ECHO_N "checking for struct sockaddr_storage... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for struct sockaddr_storage" >&5 ++echo $ECHO_N "checking for struct sockaddr_storage... $ECHO_C" >&6; } + if test "${ac_cv_sockaddr_storage+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4364,39 +4878,36 @@ struct sockaddr_storage ss + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_sockaddr_storage="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_sockaddr_storage="no" ++ ac_cv_sockaddr_storage="no" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_sockaddr_storage" >&5 +-echo "${ECHO_T}$ac_cv_sockaddr_storage" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_sockaddr_storage" >&5 ++echo "${ECHO_T}$ac_cv_sockaddr_storage" >&6; } + if test "$ac_cv_sockaddr_storage" != no; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_SOCKADDR_STORAGE 1 +@@ -4404,8 +4915,8 @@ _ACEOF + + fi + +-echo "$as_me:$LINENO: checking for struct ether_addr" >&5 +-echo $ECHO_N "checking for struct ether_addr... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for struct ether_addr" >&5 ++echo $ECHO_N "checking for struct ether_addr... $ECHO_C" >&6; } + if test "${ac_cv_ether_addr+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4430,39 +4941,36 @@ struct ether_addr ea + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_ether_addr="yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_ether_addr="no" ++ ac_cv_ether_addr="no" + + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + fi +-echo "$as_me:$LINENO: result: $ac_cv_ether_addr" >&5 +-echo "${ECHO_T}$ac_cv_ether_addr" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_ether_addr" >&5 ++echo "${ECHO_T}$ac_cv_ether_addr" >&6; } + if test "$ac_cv_ether_addr" != no; then + cat >>confdefs.h <<\_ACEOF + #define HAVE_ETHER_ADDR 1 +@@ -4471,8 +4979,8 @@ _ACEOF + fi + + +-echo "$as_me:$LINENO: checking for main in -lresolv" >&5 +-echo $ECHO_N "checking for main in -lresolv... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for main in -lresolv" >&5 ++echo $ECHO_N "checking for main in -lresolv... $ECHO_C" >&6; } + if test "${ac_cv_lib_resolv_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4489,45 +4997,43 @@ cat >>conftest.$ac_ext <<_ACEOF + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_resolv_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_resolv_main=no ++ ac_cv_lib_resolv_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_resolv_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_resolv_main" >&6; } + if test $ac_cv_lib_resolv_main = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBRESOLV 1 +@@ -4538,8 +5044,8 @@ _ACEOF + fi + + +-echo "$as_me:$LINENO: checking for main in -linet" >&5 +-echo $ECHO_N "checking for main in -linet... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for main in -linet" >&5 ++echo $ECHO_N "checking for main in -linet... $ECHO_C" >&6; } + if test "${ac_cv_lib_inet_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4556,45 +5062,43 @@ cat >>conftest.$ac_ext <<_ACEOF + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_inet_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_inet_main=no ++ ac_cv_lib_inet_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_inet_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_inet_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_inet_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_inet_main" >&6; } + if test $ac_cv_lib_inet_main = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBINET 1 +@@ -4605,8 +5109,8 @@ _ACEOF + fi + + +-echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +-echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 ++echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6; } + if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4619,55 +5123,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char gethostbyname (); + int + main () + { +-gethostbyname (); ++return gethostbyname (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_nsl_gethostbyname=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_nsl_gethostbyname=no ++ ac_cv_lib_nsl_gethostbyname=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +-echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 ++echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6; } + if test $ac_cv_lib_nsl_gethostbyname = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBNSL 1 +@@ -4678,8 +5180,8 @@ _ACEOF + fi + + +-echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 +-echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for connect in -lsocket" >&5 ++echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; } + if test "${ac_cv_lib_socket_connect+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4692,55 +5194,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char connect (); + int + main () + { +-connect (); ++return connect (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_socket_connect=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_socket_connect=no ++ ac_cv_lib_socket_connect=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 +-echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5 ++echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; } + if test $ac_cv_lib_socket_connect = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBSOCKET 1 +@@ -4755,9 +5255,9 @@ fi + for ac_func in siginterrupt + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -4783,67 +5283,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -4858,9 +5351,9 @@ done + for ac_func in snprintf strftime strcasecmp + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -4886,79 +5379,70 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 + _ACEOF + + else +- case $LIBOBJS in +- "$ac_func.$ac_objext" | \ +- *" $ac_func.$ac_objext" | \ +- "$ac_func.$ac_objext "* | \ ++ case " $LIBOBJS " in + *" $ac_func.$ac_objext "* ) ;; +- *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;; ++ *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ++ ;; + esac + + fi +@@ -4967,8 +5451,8 @@ done + + + +-echo "$as_me:$LINENO: checking for pcap_findalldevs in -lpcap" >&5 +-echo $ECHO_N "checking for pcap_findalldevs in -lpcap... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for pcap_findalldevs in -lpcap" >&5 ++echo $ECHO_N "checking for pcap_findalldevs in -lpcap... $ECHO_C" >&6; } + if test "${ac_cv_lib_pcap_pcap_findalldevs+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4981,55 +5465,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char pcap_findalldevs (); + int + main () + { +-pcap_findalldevs (); ++return pcap_findalldevs (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_pcap_pcap_findalldevs=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_pcap_pcap_findalldevs=no ++ ac_cv_lib_pcap_pcap_findalldevs=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_pcap_pcap_findalldevs" >&5 +-echo "${ECHO_T}$ac_cv_lib_pcap_pcap_findalldevs" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_pcap_pcap_findalldevs" >&5 ++echo "${ECHO_T}$ac_cv_lib_pcap_pcap_findalldevs" >&6; } + if test $ac_cv_lib_pcap_pcap_findalldevs = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBPCAP 1 +@@ -5047,9 +5529,9 @@ fi + for ac_func in pcap_dump_flush + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5075,67 +5557,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -5148,9 +5623,9 @@ done + for ac_func in pcap_get_selectable_fd + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5176,67 +5651,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -5247,8 +5715,8 @@ done + + + +-echo "$as_me:$LINENO: checking for tgetent in -ltermcap" >&5 +-echo $ECHO_N "checking for tgetent in -ltermcap... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for tgetent in -ltermcap" >&5 ++echo $ECHO_N "checking for tgetent in -ltermcap... $ECHO_C" >&6; } + if test "${ac_cv_lib_termcap_tgetent+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -5261,55 +5729,53 @@ cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char tgetent (); + int + main () + { +-tgetent (); ++return tgetent (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_termcap_tgetent=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_termcap_tgetent=no ++ ac_cv_lib_termcap_tgetent=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_tgetent" >&5 +-echo "${ECHO_T}$ac_cv_lib_termcap_tgetent" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_tgetent" >&5 ++echo "${ECHO_T}$ac_cv_lib_termcap_tgetent" >&6; } + if test $ac_cv_lib_termcap_tgetent = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBTERMCAP 1 +@@ -5320,21 +5786,21 @@ _ACEOF + fi + + +-echo "$as_me:$LINENO: checking for curses library" >&5 +-echo $ECHO_N "checking for curses library... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for curses library" >&5 ++echo $ECHO_N "checking for curses library... $ECHO_C" >&6; } + if test "${ac_cv_have_curses+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_save_CFLAGS="$CFLAGS" + ac_cv_save_LIBS="$LIBS" +- LIBS="-lslang $ac_cv_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF ++ LIBS="-lncurses $ac_cv_save_LIBS" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +-#include ++#include + int + main () + { +@@ -5344,33 +5810,30 @@ initscr(); + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_have_curses="slang" ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_have_curses="ncurses" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-LIBS="-lncurses $ac_cv_save_LIBS" +- cat >conftest.$ac_ext <<_ACEOF ++ CFLAGS="-I/usr/include/ncurses $ac_cv_save_CFLAGS" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -5386,74 +5849,29 @@ initscr(); + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_have_curses="ncurses" +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 +- +-CFLAGS="-I/usr/include/ncurses $ac_cv_save_CFLAGS" +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-#include +-int +-main () +-{ +-initscr(); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_have_curses="n_curses" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-LIBS="-lcurses $ac_cv_save_LIBS" ++ LIBS="-lcurses $ac_cv_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -5470,54 +5888,50 @@ initscr(); + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_have_curses="curses" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_have_curses="none" ++ ac_cv_have_curses="none" + + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext + +-fi +-rm -f conftest.err conftest.$ac_objext \ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS="$ac_cv_save_CFLAGS" + + fi + +-echo "$as_me:$LINENO: result: $ac_cv_have_curses" >&5 +-echo "${ECHO_T}$ac_cv_have_curses" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_have_curses" >&5 ++echo "${ECHO_T}$ac_cv_have_curses" >&6; } + + case "$ac_cv_have_curses" in + +@@ -5540,9 +5954,9 @@ _ACEOF + for ac_func in has_colors + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5568,67 +5982,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -5648,9 +6055,9 @@ _ACEOF + for ac_func in has_colors + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5676,67 +6083,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -5755,9 +6155,9 @@ _ACEOF + for ac_func in has_colors + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5783,67 +6183,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -5868,9 +6261,9 @@ esac + for ac_func in bkgd wbkgd wredrawln resizeterm use_default_colors + do + as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_func" >&5 +-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_var+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_func" >&5 ++echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } ++if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -5896,67 +6289,60 @@ cat >>conftest.$ac_ext <<_ACEOF + + #undef $ac_func + +-/* Override any gcc2 internal prototype to avoid an error. */ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ + #ifdef __cplusplus + extern "C" +-{ + #endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ + char $ac_func (); + /* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +-#if defined (__stub_$ac_func) || defined (__stub___$ac_func) ++#if defined __stub_$ac_func || defined __stub___$ac_func + choke me +-#else +-char (*f) () = $ac_func; +-#endif +-#ifdef __cplusplus +-} + #endif + + int + main () + { +-return f != $ac_func; ++return $ac_func (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_var=no" ++ eval "$as_ac_var=no" + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_var'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +@@ -5966,7 +6352,8 @@ fi + done + + +- ac_config_files="$ac_config_files Makefile" ++ac_config_files="$ac_config_files Makefile" ++ + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure +@@ -5985,39 +6372,58 @@ _ACEOF + + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. ++# So, we kill variables containing newlines. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ + (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; ++ ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} | ++ esac | ++ sort ++) | + sed ' ++ /^ac_cv_env_/b end + t clear +- : clear ++ :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- echo "not updating unwritable cache $cache_file" ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -6026,32 +6432,18 @@ test "x$prefix" = xNONE && prefix=$ac_de + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^\([^=]*=[ ]*\):*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi +- + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + +@@ -6082,17 +6474,45 @@ cat >>$CONFIG_STATUS <<\_ACEOF + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -6102,8 +6522,43 @@ else + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -6117,18 +6572,19 @@ do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -6136,159 +6592,120 @@ fi + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits +- +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done +- +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -6297,7 +6714,28 @@ else + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -6306,31 +6744,14 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + exec 6>&1 + +-# Open the log real soon, to keep \$[0] and so on meaningful, and to ++# Save the log message, to keep $[0] and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF +- ++# values after options handling. ++ac_log=" + This file was extended by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -6338,30 +6759,19 @@ generated by GNU Autoconf 2.59. Invocat + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ + _ACEOF + ++cat >>$CONFIG_STATUS <<_ACEOF + # Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" + +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +- + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. +@@ -6369,7 +6779,7 @@ current configuration. + Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit +- -V, --version print version number, then exit ++ -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +@@ -6385,18 +6795,20 @@ Configuration headers: + $config_headers + + Report bugs to ." +-_ACEOF + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + config.status +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2006 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +@@ -6407,39 +6819,24 @@ while test $# != 0 + do + case $1 in + --*=*) +- ac_option=`expr "x$1" : 'x\([^=]*\)='` +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; +- -*) ++ *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +@@ -6449,18 +6846,24 @@ Try \`$0 --help' for more information." + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +- *) ac_config_targets="$ac_config_targets $1" ;; ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + + esac + shift +@@ -6476,29 +6879,43 @@ fi + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 + +- +- +- ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. + for ac_config_target in $ac_config_targets + do +- case "$ac_config_target" in +- # Handling of arguments. +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + ++ + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely +@@ -6509,564 +6926,517 @@ if $ac_need_defaults; then + fi + + # Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, ++# simply because there is no reason against having it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +- + # Create a (secure) tmp directory for tmp files. + + { +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") + } || + { + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + +-_ACEOF +- +-cat >>$CONFIG_STATUS <<_ACEOF +- + # +-# CONFIG_FILES section. ++# Set up the sed scripts for CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@build@,$build,;t t +-s,@build_cpu@,$build_cpu,;t t +-s,@build_vendor@,$build_vendor,;t t +-s,@build_os@,$build_os,;t t +-s,@host@,$host,;t t +-s,@host_cpu@,$host_cpu,;t t +-s,@host_vendor@,$host_vendor,;t t +-s,@host_os@,$host_os,;t t +-s,@target@,$target,;t t +-s,@target_cpu@,$target_cpu,;t t +-s,@target_vendor@,$target_vendor,;t t +-s,@target_os@,$target_os,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@YACC@,$YACC,;t t +-s,@LEX@,$LEX,;t t +-s,@LEXLIB@,$LEXLIB,;t t +-s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t +-s,@CPP@,$CPP,;t t +-s,@EGREP@,$EGREP,;t t +-s,@acx_pthread_config@,$acx_pthread_config,;t t +-s,@PTHREAD_CC@,$PTHREAD_CC,;t t +-s,@PTHREAD_LIBS@,$PTHREAD_LIBS,;t t +-s,@PTHREAD_CFLAGS@,$PTHREAD_CFLAGS,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++target!$target$ac_delim ++target_cpu!$target_cpu$ac_delim ++target_vendor!$target_vendor$ac_delim ++target_os!$target_os$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++YACC!$YACC$ac_delim ++YFLAGS!$YFLAGS$ac_delim ++LEX!$LEX$ac_delim ++LEX_OUTPUT_ROOT!$LEX_OUTPUT_ROOT$ac_delim ++LEXLIB!$LEXLIB$ac_delim ++CPP!$CPP$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++acx_pthread_config!$acx_pthread_config$ac_delim ++PTHREAD_CC!$PTHREAD_CC$ac_delim ++PTHREAD_LIBS!$PTHREAD_LIBS$ac_delim ++PTHREAD_CFLAGS!$PTHREAD_CFLAGS$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 70; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-fi # test -n "$CONFIG_FILES" ++done + ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end + _ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ + cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; ++ esac ++ ++ ac_dir=`$as_dirname -- "$ac_file" || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } ++_ACEOF + +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac ++_ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? ++cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub + $extrasub + _ACEOF + cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_HEADER section. +-# +- +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' +- +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ rm -f "$tmp/stdin" + case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # ++_ACEOF ++ ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' + +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in +- +-_ACEOF ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines + +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed +- +-# This sed command replaces #undef with comments. This is necessary, for ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for + # example, in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' ++ ++while : ++do ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def + _ACEOF +- +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null +-do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines + done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs ++rm -f conftest.defines conftest.tail + ++echo "ac_result=$ac_in" >>$CONFIG_STATUS + cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in + if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + echo "$as_me: $ac_file is unchanged" >&6;} + else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- + rm -f $ac_file +- mv $tmp/config.h $ac_file ++ mv "$tmp/config.h" $ac_file + fi + else +- cat $tmp/config.h +- rm -f $tmp/config.h ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi +-done +-_ACEOF ++ rm -f "$tmp/out12" ++ ;; ++ ++ ++ esac ++ ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF +--- netdiag-1.0.orig/trafshow-5.2.3/configure.in ++++ netdiag-1.0/trafshow-5.2.3/configure.in +@@ -120,9 +120,6 @@ AC_MSG_CHECKING(for curses library) + AC_CACHE_VAL(ac_cv_have_curses, + ac_cv_save_CFLAGS="$CFLAGS" + ac_cv_save_LIBS="$LIBS" +- LIBS="-lslang $ac_cv_save_LIBS" +- AC_TRY_LINK([#include ],[initscr();], +- ac_cv_have_curses="slang", + LIBS="-lncurses $ac_cv_save_LIBS" + AC_TRY_LINK([#include ], [initscr();], + ac_cv_have_curses="ncurses", +@@ -135,7 +132,6 @@ AC_CACHE_VAL(ac_cv_have_curses, + ac_cv_have_curses="none" + ) + ) +- ) + ) + CFLAGS="$ac_cv_save_CFLAGS" + ) +--- netdiag-1.0.orig/trafshow-5.2.3/Makefile.in ++++ netdiag-1.0/trafshow-5.2.3/Makefile.in +@@ -73,9 +73,9 @@ version.c: VERSION Makefile + @echo 'char compiled[] = "$(CC) $(CFLAGS) $(LIBS)";' >> $@ + + install: +- ./install-sh -c -s -m 555 -o bin -g bin $(PROG) $(BINDEST)/$(PROG) ++ ./install-sh -c -m 555 -o bin -g bin $(PROG) $(BINDEST)/$(PROG) + ./install-sh -c -m 444 -o bin -g bin $(PROG).1 $(MANDEST)/man1/$(PROG).1 +- [ -f /etc/$(PROG) ] || ./install-sh -c -m 444 .trafshow /etc/$(PROG) ++ [ -f $(prefix)/../etc/$(PROG) ] || ./install-sh -c -m 444 .trafshow $(prefix)/../etc/$(PROG) + + clean: + rm -f $(CLEANFILES) +--- netdiag-1.0.orig/trafshow-5.2.3/trafshow.c ++++ netdiag-1.0/trafshow-5.2.3/trafshow.c +@@ -211,7 +211,10 @@ main(argc, argv) + + /* initialize curses */ + if (screen_open(0) < 0) ++ { ++ screen_close(); + exit(1); ++ } + + /* register cleanup function at exit */ + atexit(cleanup); +--- netdiag-1.0.orig/trafshow-5.2.3/session.c ++++ netdiag-1.0/trafshow-5.2.3/session.c +@@ -40,7 +40,7 @@ + #define ASYNC_MODE FNDELAY + #elif O_ASYNC + #define ASYNC_MODE O_ASYNC +-#elif ++#else + #error the fcntl argument to turn ON/OFF non-blocking I/O is unknown + #endif + +--- netdiag-1.0.orig/trafshow-5.2.3/config.sub ++++ netdiag-1.0/trafshow-5.2.3/config.sub +@@ -1,6 +1,11 @@ + #! /bin/sh +-# Configuration validation subroutine script, version 1.1. +-# Copyright (C) 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc. ++# Configuration validation subroutine script. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, ++# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, ++# Inc. ++ ++timestamp='2007-01-18' ++ + # This file is (in principle) common to ALL GNU software. + # The presence of a machine in this file suggests that SOME GNU software + # can handle that machine. It does not imply ALL GNU software can. +@@ -17,14 +22,18 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, +-# Boston, MA 02111-1307, USA. +- ++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA ++# 02110-1301, USA. ++# + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + ++ ++# Please send patches to . Submit a context ++# diff and a properly formatted ChangeLog entry. ++# + # Configuration subroutine to validate and canonicalize a configuration type. + # Supply the specified configuration type as an argument. + # If it is invalid, we print an error message on stderr and exit with code 1. +@@ -45,30 +54,75 @@ + # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM + # It is wrong to echo any other type of specification. + +-if [ x$1 = x ] +-then +- echo Configuration name missing. 1>&2 +- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 +- echo "or $0 ALIAS" 1>&2 +- echo where ALIAS is a recognized configuration type. 1>&2 +- exit 1 +-fi ++me=`echo "$0" | sed -e 's,.*/,,'` + +-# First pass through any local machine types. +-case $1 in +- *local*) +- echo $1 +- exit 0 +- ;; +- *) +- ;; ++usage="\ ++Usage: $0 [OPTION] CPU-MFR-OPSYS ++ $0 [OPTION] ALIAS ++ ++Canonicalize a configuration name. ++ ++Operation modes: ++ -h, --help print this help, then exit ++ -t, --time-stamp print date of last modification, then exit ++ -v, --version print version number, then exit ++ ++Report bugs and patches to ." ++ ++version="\ ++GNU config.sub ($timestamp) ++ ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++Free Software Foundation, Inc. ++ ++This is free software; see the source for copying conditions. There is NO ++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ ++help=" ++Try \`$me --help' for more information." ++ ++# Parse command line ++while test $# -gt 0 ; do ++ case $1 in ++ --time-stamp | --time* | -t ) ++ echo "$timestamp" ; exit ;; ++ --version | -v ) ++ echo "$version" ; exit ;; ++ --help | --h* | -h ) ++ echo "$usage"; exit ;; ++ -- ) # Stop option processing ++ shift; break ;; ++ - ) # Use stdin as input. ++ break ;; ++ -* ) ++ echo "$me: invalid option $1$help" ++ exit 1 ;; ++ ++ *local*) ++ # First pass through any local machine types. ++ echo $1 ++ exit ;; ++ ++ * ) ++ break ;; ++ esac ++done ++ ++case $# in ++ 0) echo "$me: missing argument$help" >&2 ++ exit 1;; ++ 1) ;; ++ *) echo "$me: too many arguments$help" >&2 ++ exit 1;; + esac + + # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). + # Here we must recognize all the valid KERNEL-OS combinations. + maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` + case $maybe_os in +- linux-gnu*) ++ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ ++ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ ++ storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; +@@ -94,15 +148,37 @@ case $os in + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ +- -apple) ++ -apple | -axis | -knuth | -cray) ++ os= ++ basic_machine=$1 ++ ;; ++ -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; ++ -scout) ++ ;; ++ -wrs) ++ os=-vxworks ++ basic_machine=$1 ++ ;; ++ -chorusos*) ++ os=-chorusos ++ basic_machine=$1 ++ ;; ++ -chorusrdb) ++ os=-chorusrdb ++ basic_machine=$1 ++ ;; + -hiux*) + os=-hiuxwe2 + ;; ++ -sco6) ++ os=-sco5v6 ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; + -sco5) +- os=sco3.2v5 ++ os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) +@@ -117,10 +193,17 @@ case $os in + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; ++ -sco5v6*) ++ # Don't forget version if it is 3.2v4 or newer. ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; ++ -udk*) ++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ++ ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` +@@ -143,25 +226,84 @@ case $os in + -psos*) + os=-psos + ;; ++ -mint | -mint[0-9]*) ++ basic_machine=m68k-atari ++ os=-mint ++ ;; + esac + + # Decode aliases for certain CPU-COMPANY combinations. + case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. +- tahoe | i860 | m68k | m68000 | m88k | ns32k | arm \ +- | arme[lb] | pyramid \ +- | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \ +- | alpha | we32k | ns16k | clipper | i370 | sh \ +- | powerpc | powerpcle | 1750a | dsp16xx | mips64 | mipsel \ +- | pdp11 | mips64el | mips64orion | mips64orionel \ +- | sparc | sparclet | sparclite | sparc64) ++ 1750a | 580 \ ++ | a29k \ ++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ ++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ ++ | am33_2.0 \ ++ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ ++ | bfin \ ++ | c4x | clipper \ ++ | d10v | d30v | dlx | dsp16xx \ ++ | fido | fr30 | frv \ ++ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ ++ | i370 | i860 | i960 | ia64 \ ++ | ip2k | iq2000 \ ++ | m32c | m32r | m32rle | m68000 | m68k | m88k \ ++ | maxq | mb | microblaze | mcore | mep \ ++ | mips | mipsbe | mipseb | mipsel | mipsle \ ++ | mips16 \ ++ | mips64 | mips64el \ ++ | mips64vr | mips64vrel \ ++ | mips64orion | mips64orionel \ ++ | mips64vr4100 | mips64vr4100el \ ++ | mips64vr4300 | mips64vr4300el \ ++ | mips64vr5000 | mips64vr5000el \ ++ | mips64vr5900 | mips64vr5900el \ ++ | mipsisa32 | mipsisa32el \ ++ | mipsisa32r2 | mipsisa32r2el \ ++ | mipsisa64 | mipsisa64el \ ++ | mipsisa64r2 | mipsisa64r2el \ ++ | mipsisa64sb1 | mipsisa64sb1el \ ++ | mipsisa64sr71k | mipsisa64sr71kel \ ++ | mipstx39 | mipstx39el \ ++ | mn10200 | mn10300 \ ++ | mt \ ++ | msp430 \ ++ | nios | nios2 \ ++ | ns16k | ns32k \ ++ | or32 \ ++ | pdp10 | pdp11 | pj | pjl \ ++ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ ++ | pyramid \ ++ | score \ ++ | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ ++ | sh64 | sh64le \ ++ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ ++ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ ++ | spu | strongarm \ ++ | tahoe | thumb | tic4x | tic80 | tron \ ++ | v850 | v850e \ ++ | we32k \ ++ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ ++ | z8k) + basic_machine=$basic_machine-unknown + ;; ++ m6811 | m68hc11 | m6812 | m68hc12) ++ # Motorola 68HC11/12. ++ basic_machine=$basic_machine-unknown ++ os=-none ++ ;; ++ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ++ ;; ++ ms1) ++ basic_machine=mt-unknown ++ ;; ++ + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. +- i[3456]86) ++ i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. +@@ -170,23 +312,90 @@ case $basic_machine in + exit 1 + ;; + # Recognize the basic CPU types with company name. +- vax-* | tahoe-* | i[3456]86-* | i860-* | m68k-* | m68000-* | m88k-* \ +- | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \ +- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \ +- | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \ +- | hppa-* | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \ +- | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \ +- | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \ +- | mips64el-* | mips64orion-* | mips64orionel-* | f301-*) ++ 580-* \ ++ | a29k-* \ ++ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ ++ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ ++ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ ++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ ++ | avr-* | avr32-* \ ++ | bfin-* | bs2000-* \ ++ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ ++ | clipper-* | craynv-* | cydra-* \ ++ | d10v-* | d30v-* | dlx-* \ ++ | elxsi-* \ ++ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ ++ | h8300-* | h8500-* \ ++ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ ++ | i*86-* | i860-* | i960-* | ia64-* \ ++ | ip2k-* | iq2000-* \ ++ | m32c-* | m32r-* | m32rle-* \ ++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ ++ | m88110-* | m88k-* | maxq-* | mcore-* \ ++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ ++ | mips16-* \ ++ | mips64-* | mips64el-* \ ++ | mips64vr-* | mips64vrel-* \ ++ | mips64orion-* | mips64orionel-* \ ++ | mips64vr4100-* | mips64vr4100el-* \ ++ | mips64vr4300-* | mips64vr4300el-* \ ++ | mips64vr5000-* | mips64vr5000el-* \ ++ | mips64vr5900-* | mips64vr5900el-* \ ++ | mipsisa32-* | mipsisa32el-* \ ++ | mipsisa32r2-* | mipsisa32r2el-* \ ++ | mipsisa64-* | mipsisa64el-* \ ++ | mipsisa64r2-* | mipsisa64r2el-* \ ++ | mipsisa64sb1-* | mipsisa64sb1el-* \ ++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \ ++ | mipstx39-* | mipstx39el-* \ ++ | mmix-* \ ++ | mt-* \ ++ | msp430-* \ ++ | nios-* | nios2-* \ ++ | none-* | np1-* | ns16k-* | ns32k-* \ ++ | orion-* \ ++ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ ++ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ ++ | pyramid-* \ ++ | romp-* | rs6000-* \ ++ | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ ++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ ++ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ ++ | sparclite-* \ ++ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ ++ | tahoe-* | thumb-* \ ++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ ++ | tron-* \ ++ | v850-* | v850e-* | vax-* \ ++ | we32k-* \ ++ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ ++ | xstormy16-* | xtensa-* \ ++ | ymp-* \ ++ | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. ++ 386bsd) ++ basic_machine=i386-unknown ++ os=-bsd ++ ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; ++ a29khif) ++ basic_machine=a29k-amd ++ os=-udi ++ ;; ++ abacus) ++ basic_machine=abacus-unknown ++ ;; ++ adobe68k) ++ basic_machine=m68010-adobe ++ os=-scout ++ ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; +@@ -197,25 +406,35 @@ case $basic_machine in + basic_machine=a29k-none + os=-bsd + ;; ++ amd64) ++ basic_machine=x86_64-pc ++ ;; ++ amd64-*) ++ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) +- basic_machine=m68k-cbm ++ basic_machine=m68k-unknown + ;; +- amigados) +- basic_machine=m68k-cbm +- os=-amigados ++ amigaos | amigados) ++ basic_machine=m68k-unknown ++ os=-amigaos + ;; + amigaunix | amix) +- basic_machine=m68k-cbm ++ basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; ++ apollo68bsd) ++ basic_machine=m68k-apollo ++ os=-bsd ++ ;; + aux) + basic_machine=m68k-apple + os=-aux +@@ -224,6 +443,10 @@ case $basic_machine in + basic_machine=ns32k-sequent + os=-dynix + ;; ++ c90) ++ basic_machine=c90-cray ++ os=-unicos ++ ;; + convex-c1) + basic_machine=c1-convex + os=-bsd +@@ -244,27 +467,45 @@ case $basic_machine in + basic_machine=c38-convex + os=-bsd + ;; +- cray | ymp) +- basic_machine=ymp-cray +- os=-unicos +- ;; +- cray2) +- basic_machine=cray2-cray ++ cray | j90) ++ basic_machine=j90-cray + os=-unicos + ;; +- [ctj]90-cray) +- basic_machine=c90-cray +- os=-unicos ++ craynv) ++ basic_machine=craynv-cray ++ os=-unicosmp ++ ;; ++ cr16c) ++ basic_machine=cr16c-unknown ++ os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; ++ crisv32 | crisv32-* | etraxfs*) ++ basic_machine=crisv32-axis ++ ;; ++ cris | cris-* | etrax*) ++ basic_machine=cris-axis ++ ;; ++ crx) ++ basic_machine=crx-unknown ++ os=-elf ++ ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; ++ decsystem10* | dec10*) ++ basic_machine=pdp10-dec ++ os=-tops10 ++ ;; ++ decsystem20* | dec20*) ++ basic_machine=pdp10-dec ++ os=-tops20 ++ ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola +@@ -273,6 +514,10 @@ case $basic_machine in + basic_machine=m88k-motorola + os=-sysv3 + ;; ++ djgpp) ++ basic_machine=i586-pc ++ os=-msdosdjgpp ++ ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx +@@ -292,6 +537,10 @@ case $basic_machine in + encore | umax | mmax) + basic_machine=ns32k-encore + ;; ++ es1800 | OSE68k | ose68k | ose | OSE) ++ basic_machine=m68k-ericsson ++ os=-ose ++ ;; + fx2800) + basic_machine=i860-alliant + ;; +@@ -302,6 +551,10 @@ case $basic_machine in + basic_machine=tron-gmicro + os=-sysv + ;; ++ go32) ++ basic_machine=i386-pc ++ os=-go32 ++ ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 +@@ -310,6 +563,14 @@ case $basic_machine in + basic_machine=h8300-hitachi + os=-hms + ;; ++ h8300xray) ++ basic_machine=h8300-hitachi ++ os=-xray ++ ;; ++ h8500hms) ++ basic_machine=h8500-hitachi ++ os=-hms ++ ;; + harris) + basic_machine=m88k-harris + os=-sysv3 +@@ -325,13 +586,30 @@ case $basic_machine in + basic_machine=m68k-hp + os=-hpux + ;; ++ hp3k9[0-9][0-9] | hp9[0-9][0-9]) ++ basic_machine=hppa1.0-hp ++ ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; +- hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) ++ hp9k6[0-9][0-9] | hp6[0-9][0-9]) ++ basic_machine=hppa1.0-hp ++ ;; ++ hp9k7[0-79][0-9] | hp7[0-79][0-9]) ++ basic_machine=hppa1.1-hp ++ ;; ++ hp9k78[0-9] | hp78[0-9]) ++ # FIXME: really hppa2.0-hp ++ basic_machine=hppa1.1-hp ++ ;; ++ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) ++ # FIXME: really hppa2.0-hp ++ basic_machine=hppa1.1-hp ++ ;; ++ hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) +@@ -340,27 +618,42 @@ case $basic_machine in + hppa-next) + os=-nextstep3 + ;; ++ hppaosf) ++ basic_machine=hppa1.1-hp ++ os=-osf ++ ;; ++ hppro) ++ basic_machine=hppa1.1-hp ++ os=-proelf ++ ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm +- os=-mvs + ;; + # I'm not sure what "Sysv32" means. Should this be sysv3.2? +- i[3456]86v32) ++ i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; +- i[3456]86v4*) ++ i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; +- i[3456]86v) ++ i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; +- i[3456]86sol2) ++ i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; ++ i386mach) ++ basic_machine=i386-mach ++ os=-mach ++ ;; ++ i386-vsta | vsta) ++ basic_machine=i386-unknown ++ os=-vsta ++ ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in +@@ -386,19 +679,54 @@ case $basic_machine in + basic_machine=ns32k-utek + os=-sysv + ;; ++ mingw32) ++ basic_machine=i386-pc ++ os=-mingw32 ++ ;; + miniframe) + basic_machine=m68000-convergent + ;; ++ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) ++ basic_machine=m68k-atari ++ os=-mint ++ ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; ++ monitor) ++ basic_machine=m68k-rom68k ++ os=-coff ++ ;; ++ morphos) ++ basic_machine=powerpc-unknown ++ os=-morphos ++ ;; ++ msdos) ++ basic_machine=i386-pc ++ os=-msdos ++ ;; ++ ms1-*) ++ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` ++ ;; ++ mvs) ++ basic_machine=i370-ibm ++ os=-mvs ++ ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; ++ netbsd386) ++ basic_machine=i386-unknown ++ os=-netbsd ++ ;; ++ netwinder) ++ basic_machine=armv4l-rebel ++ os=-linux ++ ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos +@@ -411,6 +739,10 @@ case $basic_machine in + basic_machine=mips-sony + os=-newsos + ;; ++ necv70) ++ basic_machine=v70-nec ++ os=-sysv ++ ;; + next | m*-next ) + basic_machine=m68k-next + case $os in +@@ -436,9 +768,39 @@ case $basic_machine in + basic_machine=i960-intel + os=-nindy + ;; ++ mon960) ++ basic_machine=i960-intel ++ os=-mon960 ++ ;; ++ nonstopux) ++ basic_machine=mips-compaq ++ os=-nonstopux ++ ;; + np1) + basic_machine=np1-gould + ;; ++ nsr-tandem) ++ basic_machine=nsr-tandem ++ ;; ++ op50n-* | op60c-*) ++ basic_machine=hppa1.1-oki ++ os=-proelf ++ ;; ++ openrisc | openrisc-*) ++ basic_machine=or32-unknown ++ ;; ++ os400) ++ basic_machine=powerpc-ibm ++ os=-os400 ++ ;; ++ OSE68000 | ose68000) ++ basic_machine=m68000-ericsson ++ os=-ose ++ ;; ++ os68k) ++ basic_machine=m68k-none ++ os=-os68k ++ ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 +@@ -453,53 +815,109 @@ case $basic_machine in + pbb) + basic_machine=m68k-tti + ;; +- pc532 | pc532-*) ++ pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; +- pentium | p5) +- basic_machine=i586-intel ++ pc98) ++ basic_machine=i386-pc ++ ;; ++ pc98-*) ++ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ pentium | p5 | k5 | k6 | nexgen | viac3) ++ basic_machine=i586-pc ++ ;; ++ pentiumpro | p6 | 6x86 | athlon | athlon_*) ++ basic_machine=i686-pc + ;; +- pentiumpro | p6) +- basic_machine=i686-intel ++ pentiumii | pentium2 | pentiumiii | pentium3) ++ basic_machine=i686-pc + ;; +- pentium-* | p5-*) ++ pentium4) ++ basic_machine=i786-pc ++ ;; ++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; +- pentiumpro-* | p6-*) ++ pentiumpro-* | p6-* | 6x86-* | athlon-*) ++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; +- k5) +- # We don't have specific support for AMD's K5 yet, so just call it a Pentium +- basic_machine=i586-amd +- ;; +- nexen) +- # We don't have specific support for Nexgen yet, so just call it a Pentium +- basic_machine=i586-nexgen ++ pentium4-*) ++ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; +- power) basic_machine=rs6000-ibm ++ power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown +- ;; ++ ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown +- ;; ++ ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; ++ ppc64) basic_machine=powerpc64-unknown ++ ;; ++ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; ++ ppc64le | powerpc64little | ppc64-le | powerpc64-little) ++ basic_machine=powerpc64le-unknown ++ ;; ++ ppc64le-* | powerpc64little-*) ++ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ++ ;; + ps2) + basic_machine=i386-ibm + ;; ++ pw32) ++ basic_machine=i586-unknown ++ os=-pw32 ++ ;; ++ rdos) ++ basic_machine=i386-pc ++ os=-rdos ++ ;; ++ rom68k) ++ basic_machine=m68k-rom68k ++ os=-coff ++ ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; ++ s390 | s390-*) ++ basic_machine=s390-ibm ++ ;; ++ s390x | s390x-*) ++ basic_machine=s390x-ibm ++ ;; ++ sa29200) ++ basic_machine=a29k-amd ++ os=-udi ++ ;; ++ sb1) ++ basic_machine=mipsisa64sb1-unknown ++ ;; ++ sb1el) ++ basic_machine=mipsisa64sb1el-unknown ++ ;; ++ sde) ++ basic_machine=mipsisa32-sde ++ os=-elf ++ ;; ++ sei) ++ basic_machine=mips-sei ++ os=-seiux ++ ;; + sequent) + basic_machine=i386-sequent + ;; +@@ -507,6 +925,16 @@ case $basic_machine in + basic_machine=sh-hitachi + os=-hms + ;; ++ sh5el) ++ basic_machine=sh5le-unknown ++ ;; ++ sh64) ++ basic_machine=sh64-unknown ++ ;; ++ sparclite-wrs | simso-wrs) ++ basic_machine=sparclite-wrs ++ os=-vxworks ++ ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 +@@ -514,6 +942,13 @@ case $basic_machine in + spur) + basic_machine=spur-unknown + ;; ++ st2000) ++ basic_machine=m68k-tandem ++ ;; ++ stratus) ++ basic_machine=i860-stratus ++ os=-sysv4 ++ ;; + sun2) + basic_machine=m68000-sun + ;; +@@ -554,13 +989,51 @@ case $basic_machine in + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; ++ sv1) ++ basic_machine=sv1-cray ++ os=-unicos ++ ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; ++ t3e) ++ basic_machine=alphaev5-cray ++ os=-unicos ++ ;; ++ t90) ++ basic_machine=t90-cray ++ os=-unicos ++ ;; ++ tic54x | c54x*) ++ basic_machine=tic54x-unknown ++ os=-coff ++ ;; ++ tic55x | c55x*) ++ basic_machine=tic55x-unknown ++ os=-coff ++ ;; ++ tic6x | c6x*) ++ basic_machine=tic6x-unknown ++ os=-coff ++ ;; ++ tx39) ++ basic_machine=mipstx39-unknown ++ ;; ++ tx39el) ++ basic_machine=mipstx39el-unknown ++ ;; ++ toad1) ++ basic_machine=pdp10-xkl ++ os=-tops20 ++ ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; ++ tpf) ++ basic_machine=s390x-ibm ++ os=-tpf ++ ;; + udi29k) + basic_machine=a29k-amd + os=-udi +@@ -569,6 +1042,10 @@ case $basic_machine in + basic_machine=a29k-nyu + os=-sym1 + ;; ++ v810 | necv810) ++ basic_machine=v810-nec ++ os=-none ++ ;; + vaxv) + basic_machine=vax-dec + os=-sysv +@@ -577,9 +1054,9 @@ case $basic_machine in + basic_machine=vax-dec + os=-vms + ;; +- vpp*|vx|vx-*) +- basic_machine=f301-fujitsu +- ;; ++ vpp*|vx|vx-*) ++ basic_machine=f301-fujitsu ++ ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks +@@ -592,13 +1069,29 @@ case $basic_machine in + basic_machine=a29k-wrs + os=-vxworks + ;; +- xmp) +- basic_machine=xmp-cray +- os=-unicos ++ w65*) ++ basic_machine=w65-wdc ++ os=-none ++ ;; ++ w89k-*) ++ basic_machine=hppa1.1-winbond ++ os=-proelf ++ ;; ++ xbox) ++ basic_machine=i686-pc ++ os=-mingw32 + ;; +- xps | xps100) ++ xps | xps100) + basic_machine=xps100-honeywell + ;; ++ ymp) ++ basic_machine=ymp-cray ++ os=-unicos ++ ;; ++ z8k-*-coff) ++ basic_machine=z8k-unknown ++ os=-sim ++ ;; + none) + basic_machine=none-none + os=-none +@@ -606,28 +1099,44 @@ case $basic_machine in + + # Here we handle the default manufacturer of certain CPU types. It is in + # some cases the only manufacturer, in others, it is the most popular. +- mips) +- basic_machine=mips-mips ++ w89k) ++ basic_machine=hppa1.1-winbond ++ ;; ++ op50n) ++ basic_machine=hppa1.1-oki ++ ;; ++ op60c) ++ basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; ++ mmix) ++ basic_machine=mmix-knuth ++ ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; ++ pdp10) ++ # there are many clones, so DEC is not a safe bet ++ basic_machine=pdp10-unknown ++ ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; +- sparc) ++ sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) ++ basic_machine=sh-unknown ++ ;; ++ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; +- cydra) ++ cydra) + basic_machine=cydra-cydrome + ;; + orion) +@@ -636,6 +1145,15 @@ case $basic_machine in + orion105) + basic_machine=clipper-highlevel + ;; ++ mac | mpw | mac-mpw) ++ basic_machine=m68k-apple ++ ;; ++ pmac | pmac-mpw) ++ basic_machine=powerpc-apple ++ ;; ++ *-unknown) ++ # Make sure to match an already-canonicalized machine name. ++ ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 +@@ -668,9 +1186,12 @@ case $os in + -solaris) + os=-solaris2 + ;; +- -unixware* | svr4*) ++ -svr4*) + os=-sysv4 + ;; ++ -unixware*) ++ os=-sysv4.2uw ++ ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; +@@ -681,17 +1202,53 @@ case $os in + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ +- | -amigados* | -msdos* | -newsos* | -unicos* | -aof* | -aos* \ ++ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ ++ | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ +- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ +- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ ++ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ ++ | -openbsd* | -solidbsd* \ ++ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ ++ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ +- | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ +- | -linux-gnu* | -uxpv*) ++ | -chorusos* | -chorusrdb* \ ++ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ ++ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ ++ | -uxpv* | -beos* | -mpeix* | -udk* \ ++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ ++ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ ++ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ ++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ ++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ ++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ ++ | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; ++ -qnx*) ++ case $basic_machine in ++ x86-* | i*86-*) ++ ;; ++ *) ++ os=-nto$os ++ ;; ++ esac ++ ;; ++ -nto-qnx*) ++ ;; ++ -nto*) ++ os=`echo $os | sed -e 's|nto|nto-qnx|'` ++ ;; ++ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ ++ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ ++ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ++ ;; ++ -mac*) ++ os=`echo $os | sed -e 's|mac|macos|'` ++ ;; ++ -linux-dietlibc) ++ os=-linux-dietlibc ++ ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; +@@ -701,6 +1258,15 @@ case $os in + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; ++ -opened*) ++ os=-openedition ++ ;; ++ -os400*) ++ os=-os400 ++ ;; ++ -wince*) ++ os=-wince ++ ;; + -osfrose*) + os=-osfrose + ;; +@@ -716,11 +1282,26 @@ case $os in + -acis*) + os=-aos + ;; ++ -atheos*) ++ os=-atheos ++ ;; ++ -syllable*) ++ os=-syllable ++ ;; ++ -386bsd) ++ os=-bsd ++ ;; + -ctix* | -uts*) + os=-sysv + ;; ++ -nova*) ++ os=-rtmk-nova ++ ;; + -ns2 ) +- os=-nextstep2 ++ os=-nextstep2 ++ ;; ++ -nsk*) ++ os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) +@@ -729,6 +1310,9 @@ case $os in + -sinix*) + os=-sysv4 + ;; ++ -tpf*) ++ os=-tpf ++ ;; + -triton*) + os=-sysv3 + ;; +@@ -747,9 +1331,27 @@ case $os in + # This must come after -sysvr4. + -sysv*) + ;; ++ -ose*) ++ os=-ose ++ ;; ++ -es1800*) ++ os=-ose ++ ;; + -xenix) + os=-xenix + ;; ++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) ++ os=-mint ++ ;; ++ -aros*) ++ os=-aros ++ ;; ++ -kaos*) ++ os=-kaos ++ ;; ++ -zvmoe) ++ os=-zvmoe ++ ;; + -none) + ;; + *) +@@ -772,13 +1374,29 @@ else + # system, and we'll never get to this point. + + case $basic_machine in ++ score-*) ++ os=-elf ++ ;; ++ spu-*) ++ os=-elf ++ ;; + *-acorn) + os=-riscix1.2 + ;; ++ arm*-rebel) ++ os=-linux ++ ;; + arm*-semi) + os=-aout + ;; +- pdp11-*) ++ c4x-* | tic4x-*) ++ os=-coff ++ ;; ++ # This must come before the *-dec entry. ++ pdp10-*) ++ os=-tops20 ++ ;; ++ pdp11-*) + os=-none + ;; + *-dec | vax-*) +@@ -796,15 +1414,48 @@ case $basic_machine in + # default. + # os=-sunos4 + ;; ++ m68*-cisco) ++ os=-aout ++ ;; ++ mep-*) ++ os=-elf ++ ;; ++ mips*-cisco) ++ os=-elf ++ ;; ++ mips*-*) ++ os=-elf ++ ;; ++ or32-*) ++ os=-coff ++ ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; ++ *-be) ++ os=-beos ++ ;; ++ *-haiku) ++ os=-haiku ++ ;; + *-ibm) + os=-aix + ;; ++ *-knuth) ++ os=-mmixware ++ ;; ++ *-wec) ++ os=-proelf ++ ;; ++ *-winbond) ++ os=-proelf ++ ;; ++ *-oki) ++ os=-proelf ++ ;; + *-hp) + os=-hpux + ;; +@@ -815,7 +1466,7 @@ case $basic_machine in + os=-sysv + ;; + *-cbm) +- os=-amigados ++ os=-amigaos + ;; + *-dg) + os=-dgux +@@ -847,27 +1498,39 @@ case $basic_machine in + *-next) + os=-nextstep3 + ;; +- *-gould) ++ *-gould) + os=-sysv + ;; +- *-highlevel) ++ *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; +- *-sgi) ++ *-sgi) + os=-irix + ;; +- *-siemens) ++ *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; +- f301-fujitsu) ++ f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; ++ *-rom68k) ++ os=-coff ++ ;; ++ *-*bug) ++ os=-coff ++ ;; ++ *-apple) ++ os=-macos ++ ;; ++ *-atari*) ++ os=-mint ++ ;; + *) + os=-none + ;; +@@ -889,9 +1552,15 @@ case $basic_machine in + -aix*) + vendor=ibm + ;; ++ -beos*) ++ vendor=be ++ ;; + -hpux*) + vendor=hp + ;; ++ -mpeix*) ++ vendor=hp ++ ;; + -hiux*) + vendor=hitachi + ;; +@@ -907,21 +1576,47 @@ case $basic_machine in + -genix*) + vendor=ns + ;; +- -mvs*) ++ -mvs* | -opened*) ++ vendor=ibm ++ ;; ++ -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; +- -vxsim* | -vxworks*) ++ -tpf*) ++ vendor=ibm ++ ;; ++ -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; ++ -hms*) ++ vendor=hitachi ++ ;; ++ -mpw* | -macos*) ++ vendor=apple ++ ;; ++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) ++ vendor=atari ++ ;; ++ -vos*) ++ vendor=stratus ++ ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; + esac + + echo $basic_machine$os ++exit ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "timestamp='" ++# time-stamp-format: "%:y-%02m-%02d" ++# time-stamp-end: "'" ++# End: +--- netdiag-1.0.orig/trafshow-5.2.3/config.guess ++++ netdiag-1.0/trafshow-5.2.3/config.guess +@@ -1,7 +1,11 @@ + #! /bin/sh + # Attempt to guess a canonical system name. +-# Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc. +-# ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, ++# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, ++# Inc. ++ ++timestamp='2007-03-06' ++ + # This file is free software; you can redistribute it and/or modify it + # under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or +@@ -14,88 +18,327 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA ++# 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + +-# Written by Per Bothner . +-# The master version of this file is at the FSF in /home/gd/gnu/lib. ++ ++# Originally written by Per Bothner . ++# Please send patches to . Submit a context ++# diff and a properly formatted ChangeLog entry. + # + # This script attempts to guess a canonical system name similar to + # config.sub. If it succeeds, it prints the system name on stdout, and + # exits with 0. Otherwise, it exits with 1. + # + # The plan is that this can be called by configure scripts if you +-# don't specify an explicit system type (host/target name). +-# +-# Only a few systems have been added to this list; please add others +-# (but try to keep the structure clean). +-# ++# don't specify an explicit build system type. ++ ++me=`echo "$0" | sed -e 's,.*/,,'` ++ ++usage="\ ++Usage: $0 [OPTION] ++ ++Output the configuration name of the system \`$me' is run on. ++ ++Operation modes: ++ -h, --help print this help, then exit ++ -t, --time-stamp print date of last modification, then exit ++ -v, --version print version number, then exit ++ ++Report bugs and patches to ." ++ ++version="\ ++GNU config.guess ($timestamp) ++ ++Originally written by Per Bothner. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++Free Software Foundation, Inc. ++ ++This is free software; see the source for copying conditions. There is NO ++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ ++help=" ++Try \`$me --help' for more information." ++ ++# Parse command line ++while test $# -gt 0 ; do ++ case $1 in ++ --time-stamp | --time* | -t ) ++ echo "$timestamp" ; exit ;; ++ --version | -v ) ++ echo "$version" ; exit ;; ++ --help | --h* | -h ) ++ echo "$usage"; exit ;; ++ -- ) # Stop option processing ++ shift; break ;; ++ - ) # Use stdin as input. ++ break ;; ++ -* ) ++ echo "$me: invalid option $1$help" >&2 ++ exit 1 ;; ++ * ) ++ break ;; ++ esac ++done ++ ++if test $# != 0; then ++ echo "$me: too many arguments$help" >&2 ++ exit 1 ++fi ++ ++trap 'exit 1' 1 2 15 ++ ++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a ++# compiler to aid in system detection is discouraged as it requires ++# temporary files to be created and, as you can see below, it is a ++# headache to deal with in a portable fashion. ++ ++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still ++# use `HOST_CC' if defined, but it is deprecated. ++ ++# Portable tmp directory creation inspired by the Autoconf team. ++ ++set_cc_for_build=' ++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; ++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; ++: ${TMPDIR=/tmp} ; ++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || ++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || ++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || ++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; ++dummy=$tmp/dummy ; ++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; ++case $CC_FOR_BUILD,$HOST_CC,$CC in ++ ,,) echo "int x;" > $dummy.c ; ++ for c in cc gcc c89 c99 ; do ++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then ++ CC_FOR_BUILD="$c"; break ; ++ fi ; ++ done ; ++ if test x"$CC_FOR_BUILD" = x ; then ++ CC_FOR_BUILD=no_compiler_found ; ++ fi ++ ;; ++ ,,*) CC_FOR_BUILD=$CC ;; ++ ,*,*) CC_FOR_BUILD=$HOST_CC ;; ++esac ; set_cc_for_build= ;' + + # This is needed to find uname on a Pyramid OSx when run in the BSD universe. +-# (ghazi@noc.rutgers.edu 8/24/94.) ++# (ghazi@noc.rutgers.edu 1994-08-24) + if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH + fi + + UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown + UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown ++UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown + UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 +- + # Note: order is significant - the case branches are not exclusive. + + case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in ++ *:NetBSD:*:*) ++ # NetBSD (nbsd) targets should (where applicable) match one or ++ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, ++ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently ++ # switched to ELF, *-*-netbsd* would select the old ++ # object file format. This provides both forward ++ # compatibility and a consistent mechanism for selecting the ++ # object file format. ++ # ++ # Note: NetBSD doesn't particularly care about the vendor ++ # portion of the name. We always set it to "unknown". ++ sysctl="sysctl -n hw.machine_arch" ++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ ++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` ++ case "${UNAME_MACHINE_ARCH}" in ++ armeb) machine=armeb-unknown ;; ++ arm*) machine=arm-unknown ;; ++ sh3el) machine=shl-unknown ;; ++ sh3eb) machine=sh-unknown ;; ++ sh5el) machine=sh5le-unknown ;; ++ *) machine=${UNAME_MACHINE_ARCH}-unknown ;; ++ esac ++ # The Operating System including object format, if it has switched ++ # to ELF recently, or will in the future. ++ case "${UNAME_MACHINE_ARCH}" in ++ arm*|i386|m68k|ns32k|sh3*|sparc|vax) ++ eval $set_cc_for_build ++ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ ++ | grep __ELF__ >/dev/null ++ then ++ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). ++ # Return netbsd for either. FIX? ++ os=netbsd ++ else ++ os=netbsdelf ++ fi ++ ;; ++ *) ++ os=netbsd ++ ;; ++ esac ++ # The OS release ++ # Debian GNU/NetBSD machines have a different userland, and ++ # thus, need a distinct triplet. However, they do not need ++ # kernel version information, so it can be replaced with a ++ # suitable tag, in the style of linux-gnu. ++ case "${UNAME_VERSION}" in ++ Debian*) ++ release='-gnu' ++ ;; ++ *) ++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` ++ ;; ++ esac ++ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: ++ # contains redundant information, the shorter form: ++ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. ++ echo "${machine}-${os}${release}" ++ exit ;; ++ *:OpenBSD:*:*) ++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` ++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} ++ exit ;; ++ *:ekkoBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} ++ exit ;; ++ *:SolidBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} ++ exit ;; ++ macppc:MirBSD:*:*) ++ echo powerpc-unknown-mirbsd${UNAME_RELEASE} ++ exit ;; ++ *:MirBSD:*:*) ++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} ++ exit ;; + alpha:OSF1:*:*) ++ case $UNAME_RELEASE in ++ *4.0) ++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` ++ ;; ++ *5.*) ++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` ++ ;; ++ esac ++ # According to Compaq, /usr/sbin/psrinfo has been available on ++ # OSF/1 and Tru64 systems produced since 1995. I hope that ++ # covers most systems running today. This code pipes the CPU ++ # types through head -n 1, so we only detect the type of CPU 0. ++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` ++ case "$ALPHA_CPU_TYPE" in ++ "EV4 (21064)") ++ UNAME_MACHINE="alpha" ;; ++ "EV4.5 (21064)") ++ UNAME_MACHINE="alpha" ;; ++ "LCA4 (21066/21068)") ++ UNAME_MACHINE="alpha" ;; ++ "EV5 (21164)") ++ UNAME_MACHINE="alphaev5" ;; ++ "EV5.6 (21164A)") ++ UNAME_MACHINE="alphaev56" ;; ++ "EV5.6 (21164PC)") ++ UNAME_MACHINE="alphapca56" ;; ++ "EV5.7 (21164PC)") ++ UNAME_MACHINE="alphapca57" ;; ++ "EV6 (21264)") ++ UNAME_MACHINE="alphaev6" ;; ++ "EV6.7 (21264A)") ++ UNAME_MACHINE="alphaev67" ;; ++ "EV6.8CB (21264C)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.8AL (21264B)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.8CX (21264D)") ++ UNAME_MACHINE="alphaev68" ;; ++ "EV6.9A (21264/EV69A)") ++ UNAME_MACHINE="alphaev69" ;; ++ "EV7 (21364)") ++ UNAME_MACHINE="alphaev7" ;; ++ "EV7.9 (21364A)") ++ UNAME_MACHINE="alphaev79" ;; ++ esac ++ # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. +- echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//'` +- exit 0 ;; ++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` ++ exit ;; ++ Alpha\ *:Windows_NT*:*) ++ # How do we know it's Interix rather than the generic POSIX subsystem? ++ # Should we change UNAME_MACHINE based on the output of uname instead ++ # of the specific Alpha model? ++ echo alpha-pc-interix ++ exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 +- exit 0 ;; ++ exit ;; + Amiga*:UNIX_System_V:4.0:*) +- echo m68k-cbm-sysv4 +- exit 0;; +- amiga:NetBSD:*:*) +- echo m68k-cbm-netbsd${UNAME_RELEASE} +- exit 0 ;; +- amiga:OpenBSD:*:*) +- echo m68k-cbm-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ echo m68k-unknown-sysv4 ++ exit ;; ++ *:[Aa]miga[Oo][Ss]:*:*) ++ echo ${UNAME_MACHINE}-unknown-amigaos ++ exit ;; ++ *:[Mm]orph[Oo][Ss]:*:*) ++ echo ${UNAME_MACHINE}-unknown-morphos ++ exit ;; ++ *:OS/390:*:*) ++ echo i370-ibm-openedition ++ exit ;; ++ *:z/VM:*:*) ++ echo s390-ibm-zvmoe ++ exit ;; ++ *:OS400:*:*) ++ echo powerpc-ibm-os400 ++ exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} +- exit 0;; +- Pyramid*:OSx*:*:*|MIS*:OSx*:*:*) ++ exit ;; ++ arm:riscos:*:*|arm:RISCOS:*:*) ++ echo arm-unknown-riscos ++ exit ;; ++ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) ++ echo hppa1.1-hitachi-hiuxmpp ++ exit ;; ++ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi +- exit 0 ;; +- NILE:*:*:dcosx) ++ exit ;; ++ NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 +- exit 0 ;; ++ exit ;; ++ DRS?6000:unix:4.0:6*) ++ echo sparc-icl-nx6 ++ exit ;; ++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) ++ case `/usr/bin/uname -p` in ++ sparc) echo sparc-icl-nx7; exit ;; ++ esac ;; ++ sun4H:SunOS:5.*:*) ++ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` ++ exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) +@@ -104,46 +347,78 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` +- exit 0 ;; ++ exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ sun*:*:4.2BSD:*) ++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` ++ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 ++ case "`/bin/arch`" in ++ sun3) ++ echo m68k-sun-sunos${UNAME_RELEASE} ++ ;; ++ sun4) ++ echo sparc-sun-sunos${UNAME_RELEASE} ++ ;; ++ esac ++ exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} +- exit 0 ;; +- atari*:NetBSD:*:*) +- echo m68k-atari-netbsd${UNAME_RELEASE} +- exit 0 ;; +- atari*:OpenBSD:*:*) +- echo m68k-atari-openbsd${UNAME_RELEASE} +- exit 0 ;; +- sun3*:NetBSD:*:*) +- echo m68k-sun-netbsd${UNAME_RELEASE} +- exit 0 ;; +- sun3*:OpenBSD:*:*) +- echo m68k-sun-openbsd${UNAME_RELEASE} +- exit 0 ;; +- mac68k:NetBSD:*:*) +- echo m68k-apple-netbsd${UNAME_RELEASE} +- exit 0 ;; +- mac68k:OpenBSD:*:*) +- echo m68k-apple-openbsd${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ # The situation for MiNT is a little confusing. The machine name ++ # can be virtually everything (everything which is not ++ # "atarist" or "atariste" at least should have a processor ++ # > m68000). The system name ranges from "MiNT" over "FreeMiNT" ++ # to the lowercase version "mint" (or "freemint"). Finally ++ # the system name "TOS" denotes a system which is actually not ++ # MiNT. But MiNT is downward compatible to TOS, so this should ++ # be no problem. ++ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) ++ echo m68k-atari-mint${UNAME_RELEASE} ++ exit ;; ++ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) ++ echo m68k-atari-mint${UNAME_RELEASE} ++ exit ;; ++ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) ++ echo m68k-atari-mint${UNAME_RELEASE} ++ exit ;; ++ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) ++ echo m68k-milan-mint${UNAME_RELEASE} ++ exit ;; ++ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) ++ echo m68k-hades-mint${UNAME_RELEASE} ++ exit ;; ++ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) ++ echo m68k-unknown-mint${UNAME_RELEASE} ++ exit ;; ++ m68k:machten:*:*) ++ echo m68k-apple-machten${UNAME_RELEASE} ++ exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 +- exit 0 ;; ++ exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ 2020:CLIX:*:* | 2430:CLIX:*:*) ++ echo clipper-intergraph-clix${UNAME_RELEASE} ++ exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) +- sed 's/^ //' << EOF >dummy.c +- int main (argc, argv) int argc; char **argv; { ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++#ifdef __cplusplus ++#include /* for printf() prototype */ ++ int main (int argc, char *argv[]) { ++#else ++ int main (argc, argv) int argc; char *argv[]; { ++#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); +@@ -158,62 +433,83 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ + exit (-1); + } + EOF +- ${CC-cc} dummy.c -o dummy \ +- && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ +- && rm dummy.c dummy && exit 0 +- rm -f dummy.c dummy ++ $CC_FOR_BUILD -o $dummy $dummy.c && ++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && ++ SYSTEM_NAME=`$dummy $dummyarg` && ++ { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ Motorola:PowerMAX_OS:*:*) ++ echo powerpc-motorola-powermax ++ exit ;; ++ Motorola:*:4.3:PL8-*) ++ echo powerpc-harris-powermax ++ exit ;; ++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) ++ echo powerpc-harris-powermax ++ exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix +- exit 0 ;; ++ exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 +- exit 0 ;; ++ exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 +- exit 0 ;; ++ exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` +- if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then +- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ +- -o ${TARGET_BINARY_INTERFACE}x = x ] ; then ++ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] ++ then ++ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ ++ [ ${TARGET_BINARY_INTERFACE}x = x ] ++ then + echo m88k-dg-dgux${UNAME_RELEASE} +- else ++ else + echo m88k-dg-dguxbcs${UNAME_RELEASE} ++ fi ++ else ++ echo i586-dg-dgux${UNAME_RELEASE} + fi +- else echo i586-dg-dgux${UNAME_RELEASE} +- fi +- exit 0 ;; ++ exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 +- exit 0 ;; ++ exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 +- exit 0 ;; ++ exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 +- exit 0 ;; ++ exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd +- exit 0 ;; ++ exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` +- exit 0 ;; ++ exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. +- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id +- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' +- i?86:AIX:*:*) ++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id ++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' ++ i*86:AIX:*:*) + echo i386-ibm-aix +- exit 0 ;; ++ exit ;; ++ ia64:AIX:*:*) ++ if [ -x /usr/bin/oslevel ] ; then ++ IBM_REV=`/usr/bin/oslevel` ++ else ++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} ++ fi ++ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} ++ exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then +- sed 's/^ //' << EOF >dummy.c ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c + #include + + main() +@@ -224,17 +520,21 @@ EOF + exit(0); + } + EOF +- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 +- rm -f dummy.c dummy +- echo rs6000-ibm-aix3.2.5 ++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` ++ then ++ echo "$SYSTEM_NAME" ++ else ++ echo rs6000-ibm-aix3.2.5 ++ fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi +- exit 0 ;; +- *:AIX:*:4) +- if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then ++ exit ;; ++ *:AIX:*:[45]) ++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` ++ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc +@@ -242,43 +542,120 @@ EOF + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else +- IBM_REV=4.${UNAME_RELEASE} ++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} +- exit 0 ;; ++ exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix +- exit 0 ;; ++ exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 +- exit 0 ;; +- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and ++ exit ;; ++ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to +- exit 0 ;; # report: romp-ibm BSD 4.3 ++ exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx +- exit 0 ;; ++ exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 +- exit 0 ;; ++ exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd +- exit 0 ;; ++ exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 +- exit 0 ;; +- 9000/[3478]??:HP-UX:*:*) ++ exit ;; ++ 9000/[34678]??:HP-UX:*:*) ++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; +- 9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;; +- 9000/8?? ) HP_ARCH=hppa1.0 ;; ++ 9000/[678][0-9][0-9]) ++ if [ -x /usr/bin/getconf ]; then ++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` ++ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` ++ case "${sc_cpu_version}" in ++ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 ++ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 ++ 532) # CPU_PA_RISC2_0 ++ case "${sc_kernel_bits}" in ++ 32) HP_ARCH="hppa2.0n" ;; ++ 64) HP_ARCH="hppa2.0w" ;; ++ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 ++ esac ;; ++ esac ++ fi ++ if [ "${HP_ARCH}" = "" ]; then ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ ++ #define _HPUX_SOURCE ++ #include ++ #include ++ ++ int main () ++ { ++ #if defined(_SC_KERNEL_BITS) ++ long bits = sysconf(_SC_KERNEL_BITS); ++ #endif ++ long cpu = sysconf (_SC_CPU_VERSION); ++ ++ switch (cpu) ++ { ++ case CPU_PA_RISC1_0: puts ("hppa1.0"); break; ++ case CPU_PA_RISC1_1: puts ("hppa1.1"); break; ++ case CPU_PA_RISC2_0: ++ #if defined(_SC_KERNEL_BITS) ++ switch (bits) ++ { ++ case 64: puts ("hppa2.0w"); break; ++ case 32: puts ("hppa2.0n"); break; ++ default: puts ("hppa2.0"); break; ++ } break; ++ #else /* !defined(_SC_KERNEL_BITS) */ ++ puts ("hppa2.0"); break; ++ #endif ++ default: puts ("hppa1.0"); break; ++ } ++ exit (0); ++ } ++EOF ++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` ++ test -z "$HP_ARCH" && HP_ARCH=hppa ++ fi ;; + esac +- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` ++ if [ ${HP_ARCH} = "hppa2.0w" ] ++ then ++ eval $set_cc_for_build ++ ++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating ++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler ++ # generating 64-bit code. GNU and HP use different nomenclature: ++ # ++ # $ CC_FOR_BUILD=cc ./config.guess ++ # => hppa2.0w-hp-hpux11.23 ++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess ++ # => hppa64-hp-hpux11.23 ++ ++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | ++ grep __LP64__ >/dev/null ++ then ++ HP_ARCH="hppa2.0w" ++ else ++ HP_ARCH="hppa64" ++ fi ++ fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} +- exit 0 ;; ++ exit ;; ++ ia64:HP-UX:*:*) ++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` ++ echo ia64-hp-hpux${HPUX_REV} ++ exit ;; + 3050*:HI-UX:*:*) +- sed 's/^ //' << EOF >dummy.c ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c + #include + int + main () +@@ -303,224 +680,481 @@ EOF + exit (0); + } + EOF +- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 +- rm -f dummy.c dummy ++ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && ++ { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 +- exit 0 ;; ++ exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd +- exit 0 ;; ++ exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd +- exit 0 ;; ++ exit ;; ++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) ++ echo hppa1.0-hp-mpeix ++ exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf +- exit 0 ;; ++ exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf +- exit 0 ;; +- i?86:OSF1:*:*) ++ exit ;; ++ i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi +- exit 0 ;; ++ exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites +- exit 0 ;; ++ exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd +- exit 0 ;; ++ exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi +- exit 0 ;; ++ exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd +- exit 0 ;; ++ exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd +- exit 0 ;; ++ exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd +- exit 0 ;; +- CRAY*X-MP:*:*:*) +- echo xmp-cray-unicos +- exit 0 ;; ++ exit ;; + CRAY*Y-MP:*:*:*) +- echo ymp-cray-unicos${UNAME_RELEASE} +- exit 0 ;; ++ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ +- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ +- exit 0 ;; ++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ ++ -e 's/\.[^.]*$/.X/' ++ exit ;; + CRAY*TS:*:*:*) +- echo t90-cray-unicos${UNAME_RELEASE} +- exit 0 ;; +- CRAY-2:*:*:*) +- echo cray2-cray-unicos +- exit 0 ;; +- F300:UNIX_System_V:*:*) +- FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'` ++ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ CRAY*T3E:*:*:*) ++ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ CRAY*SV1:*:*:*) ++ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ *:UNICOS/mp:*:*) ++ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' ++ exit ;; ++ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) ++ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` ++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` +- echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" +- exit 0 ;; +- F301:UNIX_System_V:*:*) +- echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` +- exit 0 ;; +- hp3[0-9][05]:NetBSD:*:*) +- echo m68k-hp-netbsd${UNAME_RELEASE} +- exit 0 ;; +- hp3[0-9][05]:OpenBSD:*:*) +- echo m68k-hp-openbsd${UNAME_RELEASE} +- exit 0 ;; +- i?86:BSD/386:*:* | *:BSD/OS:*:*) ++ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ++ exit ;; ++ 5000:UNIX_System_V:4.*:*) ++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` ++ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` ++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" ++ exit ;; ++ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ sparc*:BSD/OS:*:*) ++ echo sparc-unknown-bsdi${UNAME_RELEASE} ++ exit ;; ++ *:BSD/OS:*:*) ++ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} ++ exit ;; + *:FreeBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` +- exit 0 ;; +- *:NetBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` +- exit 0 ;; +- *:OpenBSD:*:*) +- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` +- exit 0 ;; ++ case ${UNAME_MACHINE} in ++ pc98) ++ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ amd64) ++ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ *) ++ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; ++ esac ++ exit ;; + i*:CYGWIN*:*) +- echo i386-pc-cygwin32 +- exit 0 ;; ++ echo ${UNAME_MACHINE}-pc-cygwin ++ exit ;; ++ *:MINGW*:*) ++ echo ${UNAME_MACHINE}-pc-mingw32 ++ exit ;; ++ i*:windows32*:*) ++ # uname -m includes "-pc" on this system. ++ echo ${UNAME_MACHINE}-mingw32 ++ exit ;; ++ i*:PW*:*) ++ echo ${UNAME_MACHINE}-pc-pw32 ++ exit ;; ++ *:Interix*:[3456]*) ++ case ${UNAME_MACHINE} in ++ x86) ++ echo i586-pc-interix${UNAME_RELEASE} ++ exit ;; ++ EM64T | authenticamd) ++ echo x86_64-unknown-interix${UNAME_RELEASE} ++ exit ;; ++ esac ;; ++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) ++ echo i${UNAME_MACHINE}-pc-mks ++ exit ;; ++ i*:Windows_NT*:* | Pentium*:Windows_NT*:*) ++ # How do we know it's Interix rather than the generic POSIX subsystem? ++ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we ++ # UNAME_MACHINE based on the output of uname instead of i386? ++ echo i586-pc-interix ++ exit ;; ++ i*:UWIN*:*) ++ echo ${UNAME_MACHINE}-pc-uwin ++ exit ;; ++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) ++ echo x86_64-unknown-cygwin ++ exit ;; + p*:CYGWIN*:*) +- echo powerpcle-unknown-cygwin32 +- exit 0 ;; ++ echo powerpcle-unknown-cygwin ++ exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` +- exit 0 ;; ++ exit ;; + *:GNU:*:*) +- echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` +- exit 0 ;; +- *:Linux:*:*) ++ # the GNU system ++ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` ++ exit ;; ++ *:GNU/*:*:*) ++ # other systems with GNU libc and userland ++ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu ++ exit ;; ++ i*86:Minix:*:*) ++ echo ${UNAME_MACHINE}-pc-minix ++ exit ;; ++ arm*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ avr32*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ cris:Linux:*:*) ++ echo cris-axis-linux-gnu ++ exit ;; ++ crisv32:Linux:*:*) ++ echo crisv32-axis-linux-gnu ++ exit ;; ++ frv:Linux:*:*) ++ echo frv-unknown-linux-gnu ++ exit ;; ++ ia64:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ m32r*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ m68*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ mips:Linux:*:*) ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #undef CPU ++ #undef mips ++ #undef mipsel ++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) ++ CPU=mipsel ++ #else ++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) ++ CPU=mips ++ #else ++ CPU= ++ #endif ++ #endif ++EOF ++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' ++ /^CPU/{ ++ s: ::g ++ p ++ }'`" ++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ++ ;; ++ mips64:Linux:*:*) ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #undef CPU ++ #undef mips64 ++ #undef mips64el ++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) ++ CPU=mips64el ++ #else ++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) ++ CPU=mips64 ++ #else ++ CPU= ++ #endif ++ #endif ++EOF ++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' ++ /^CPU/{ ++ s: ::g ++ p ++ }'`" ++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ++ ;; ++ or32:Linux:*:*) ++ echo or32-unknown-linux-gnu ++ exit ;; ++ ppc:Linux:*:*) ++ echo powerpc-unknown-linux-gnu ++ exit ;; ++ ppc64:Linux:*:*) ++ echo powerpc64-unknown-linux-gnu ++ exit ;; ++ alpha:Linux:*:*) ++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in ++ EV5) UNAME_MACHINE=alphaev5 ;; ++ EV56) UNAME_MACHINE=alphaev56 ;; ++ PCA56) UNAME_MACHINE=alphapca56 ;; ++ PCA57) UNAME_MACHINE=alphapca56 ;; ++ EV6) UNAME_MACHINE=alphaev6 ;; ++ EV67) UNAME_MACHINE=alphaev67 ;; ++ EV68*) UNAME_MACHINE=alphaev68 ;; ++ esac ++ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null ++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi ++ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ++ exit ;; ++ parisc:Linux:*:* | hppa:Linux:*:*) ++ # Look for CPU level ++ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in ++ PA7*) echo hppa1.1-unknown-linux-gnu ;; ++ PA8*) echo hppa2.0-unknown-linux-gnu ;; ++ *) echo hppa-unknown-linux-gnu ;; ++ esac ++ exit ;; ++ parisc64:Linux:*:* | hppa64:Linux:*:*) ++ echo hppa64-unknown-linux-gnu ++ exit ;; ++ s390:Linux:*:* | s390x:Linux:*:*) ++ echo ${UNAME_MACHINE}-ibm-linux ++ exit ;; ++ sh64*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ sh*:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ sparc:Linux:*:* | sparc64:Linux:*:*) ++ echo ${UNAME_MACHINE}-unknown-linux-gnu ++ exit ;; ++ vax:Linux:*:*) ++ echo ${UNAME_MACHINE}-dec-linux-gnu ++ exit ;; ++ x86_64:Linux:*:*) ++ echo x86_64-unknown-linux-gnu ++ exit ;; ++ xtensa:Linux:*:*) ++ echo xtensa-unknown-linux-gnu ++ exit ;; ++ i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so +- # first see if it will tell us. +- ld_help_string=`ld --help 2>&1` +- if echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf_i.86"; then +- echo "${UNAME_MACHINE}-pc-linux-gnu" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86linux"; then +- echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: i.86coff"; then +- echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68kelf"; then +- echo "${UNAME_MACHINE}-unknown-linux-gnu" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: m68klinux"; then +- echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 +- elif echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations: elf32ppc"; then +- echo "powerpc-unknown-linux-gnu" ; exit 0 +- elif test "${UNAME_MACHINE}" = "alpha" ; then +- echo alpha-unknown-linux-gnu ; exit 0 +- elif test "${UNAME_MACHINE}" = "sparc" ; then +- echo sparc-unknown-linux-gnu ; exit 0 +- else +- # Either a pre-BFD a.out linker (linux-gnuoldld) or one that does not give us +- # useful --help. Gcc wants to distinguish between linux-gnuoldld and linux-gnuaout. +- test ! -d /usr/lib/ldscripts/. \ +- && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 +- # Determine whether the default compiler is a.out or elf +- cat >dummy.c <&1 \ ++ | sed -ne '/supported targets:/!d ++ s/[ ][ ]*/ /g ++ s/.*supported targets: *// ++ s/ .*// ++ p'` ++ case "$ld_supported_targets" in ++ elf32-i386) ++ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ++ ;; ++ a.out-i386-linux) ++ echo "${UNAME_MACHINE}-pc-linux-gnuaout" ++ exit ;; ++ coff-i386) ++ echo "${UNAME_MACHINE}-pc-linux-gnucoff" ++ exit ;; ++ "") ++ # Either a pre-BFD a.out linker (linux-gnuoldld) or ++ # one that does not give us useful --help. ++ echo "${UNAME_MACHINE}-pc-linux-gnuoldld" ++ exit ;; ++ esac ++ # Determine whether the default compiler is a.out or elf ++ eval $set_cc_for_build ++ sed 's/^ //' << EOF >$dummy.c ++ #include ++ #ifdef __ELF__ ++ # ifdef __GLIBC__ ++ # if __GLIBC__ >= 2 ++ LIBC=gnu ++ # else ++ LIBC=gnulibc1 ++ # endif ++ # else ++ LIBC=gnulibc1 ++ # endif ++ #else ++ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) ++ LIBC=gnu ++ #else ++ LIBC=gnuaout ++ #endif ++ #endif ++ #ifdef __dietlibc__ ++ LIBC=dietlibc ++ #endif + EOF +- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 +- rm -f dummy.c dummy +- fi ;; +-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions +-# are messed up and put the nodename in both sysname and nodename. +- i?86:DYNIX/ptx:4*:*) ++ eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' ++ /^LIBC/{ ++ s: ::g ++ p ++ }'`" ++ test x"${LIBC}" != x && { ++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}" ++ exit ++ } ++ test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } ++ ;; ++ i*86:DYNIX/ptx:4*:*) ++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. ++ # earlier versions are messed up and put the nodename in both ++ # sysname and nodename. + echo i386-sequent-sysv4 +- exit 0 ;; +- i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) ++ exit ;; ++ i*86:UNIX_SV:4.2MP:2.*) ++ # Unixware is an offshoot of SVR4, but it has its own version ++ # number series starting with 2... ++ # I am not positive that other SVR4 systems won't match this, ++ # I just have to hope. -- rms. ++ # Use sysv4.2uw... so that sysv4* matches it. ++ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} ++ exit ;; ++ i*86:OS/2:*:*) ++ # If we were able to find `uname', then EMX Unix compatibility ++ # is probably installed. ++ echo ${UNAME_MACHINE}-pc-os2-emx ++ exit ;; ++ i*86:XTS-300:*:STOP) ++ echo ${UNAME_MACHINE}-unknown-stop ++ exit ;; ++ i*86:atheos:*:*) ++ echo ${UNAME_MACHINE}-unknown-atheos ++ exit ;; ++ i*86:syllable:*:*) ++ echo ${UNAME_MACHINE}-pc-syllable ++ exit ;; ++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) ++ echo i386-unknown-lynxos${UNAME_RELEASE} ++ exit ;; ++ i*86:*DOS:*:*) ++ echo ${UNAME_MACHINE}-pc-msdosdjgpp ++ exit ;; ++ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) ++ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then +- echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} ++ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else +- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} ++ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi +- exit 0 ;; +- i?86:*:3.2:*) ++ exit ;; ++ i*86:*:5:[678]*) ++ # UnixWare 7.x, OpenUNIX and OpenServer 6. ++ case `/bin/uname -X | grep "^Machine"` in ++ *486*) UNAME_MACHINE=i486 ;; ++ *Pentium) UNAME_MACHINE=i586 ;; ++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;; ++ esac ++ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} ++ exit ;; ++ i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then +- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` +- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 +- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ ++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` ++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 ++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 ++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ ++ && UNAME_MACHINE=i686 ++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ ++ && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi +- exit 0 ;; ++ exit ;; ++ pc:*:*:*) ++ # Left here for compatibility: ++ # uname -m prints for DJGPP always 'pc', but it prints nothing about ++ # the processor, so we play safe by assuming i386. ++ echo i386-pc-msdosdjgpp ++ exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 +- exit 0 ;; ++ exit ;; + paragon:*:*:*) + echo i860-intel-osf1 +- exit 0 ;; ++ exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi +- exit 0 ;; ++ exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv +- exit 0 ;; +- M68*:*:R3V[567]*:*) +- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; +- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) ++ exit ;; ++ mc68k:UNIX:SYSTEM5:3.51m) ++ echo m68k-convergent-sysv ++ exit ;; ++ M680?0:D-NIX:5.3:*) ++ echo m68k-diab-dnix ++ exit ;; ++ M68*:*:R3V[5678]*:*) ++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; ++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4.3${OS_REL} && exit 0 ++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ +- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; ++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ +- && echo i486-ncr-sysv4 && exit 0 ;; +- m68*:LynxOS:2.*:*) ++ && { echo i486-ncr-sysv4; exit; } ;; ++ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 +- exit 0 ;; +- i?86:LynxOS:2.*:*) +- echo i386-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; +- rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) ++ exit ;; ++ rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) ++ echo powerpc-unknown-lynxos${UNAME_RELEASE} ++ exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} +- exit 0 ;; ++ exit ;; ++ RM*:ReliantUNIX-*:*:*) ++ echo mips-sni-sysv4 ++ exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 +- exit 0 ;; ++ exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` +@@ -528,36 +1162,165 @@ EOF + else + echo ns32k-sni-sysv + fi +- exit 0 ;; ++ exit ;; ++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort ++ # says ++ echo i586-unisys-sysv4 ++ exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 +- exit 0 ;; ++ exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 +- exit 0 ;; ++ exit ;; ++ i*86:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo ${UNAME_MACHINE}-stratus-vos ++ exit ;; ++ *:VOS:*:*) ++ # From Paul.Green@stratus.com. ++ echo hppa1.1-stratus-vos ++ exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} +- exit 0 ;; +- R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*) ++ exit ;; ++ news*:NEWS-OS:6*:*) ++ echo mips-sony-newsos6 ++ exit ;; ++ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi +- exit 0 ;; +- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort +- # says +- echo i586-unisys-sysv4 +- exit 0 ;; ++ exit ;; ++ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. ++ echo powerpc-be-beos ++ exit ;; ++ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. ++ echo powerpc-apple-beos ++ exit ;; ++ BePC:BeOS:*:*) # BeOS running on Intel PC compatible. ++ echo i586-pc-beos ++ exit ;; ++ SX-4:SUPER-UX:*:*) ++ echo sx4-nec-superux${UNAME_RELEASE} ++ exit ;; ++ SX-5:SUPER-UX:*:*) ++ echo sx5-nec-superux${UNAME_RELEASE} ++ exit ;; ++ SX-6:SUPER-UX:*:*) ++ echo sx6-nec-superux${UNAME_RELEASE} ++ exit ;; ++ SX-7:SUPER-UX:*:*) ++ echo sx7-nec-superux${UNAME_RELEASE} ++ exit ;; ++ SX-8:SUPER-UX:*:*) ++ echo sx8-nec-superux${UNAME_RELEASE} ++ exit ;; ++ SX-8R:SUPER-UX:*:*) ++ echo sx8r-nec-superux${UNAME_RELEASE} ++ exit ;; ++ Power*:Rhapsody:*:*) ++ echo powerpc-apple-rhapsody${UNAME_RELEASE} ++ exit ;; ++ *:Rhapsody:*:*) ++ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} ++ exit ;; ++ *:Darwin:*:*) ++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown ++ case $UNAME_PROCESSOR in ++ unknown) UNAME_PROCESSOR=powerpc ;; ++ esac ++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} ++ exit ;; ++ *:procnto*:*:* | *:QNX:[0123456789]*:*) ++ UNAME_PROCESSOR=`uname -p` ++ if test "$UNAME_PROCESSOR" = "x86"; then ++ UNAME_PROCESSOR=i386 ++ UNAME_MACHINE=pc ++ fi ++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} ++ exit ;; ++ *:QNX:*:4*) ++ echo i386-pc-qnx ++ exit ;; ++ NSE-?:NONSTOP_KERNEL:*:*) ++ echo nse-tandem-nsk${UNAME_RELEASE} ++ exit ;; ++ NSR-?:NONSTOP_KERNEL:*:*) ++ echo nsr-tandem-nsk${UNAME_RELEASE} ++ exit ;; ++ *:NonStop-UX:*:*) ++ echo mips-compaq-nonstopux ++ exit ;; ++ BS2000:POSIX*:*:*) ++ echo bs2000-siemens-sysv ++ exit ;; ++ DS/*:UNIX_System_V:*:*) ++ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} ++ exit ;; ++ *:Plan9:*:*) ++ # "uname -m" is not consistent, so use $cputype instead. 386 ++ # is converted to i386 for consistency with other x86 ++ # operating systems. ++ if test "$cputype" = "386"; then ++ UNAME_MACHINE=i386 ++ else ++ UNAME_MACHINE="$cputype" ++ fi ++ echo ${UNAME_MACHINE}-unknown-plan9 ++ exit ;; ++ *:TOPS-10:*:*) ++ echo pdp10-unknown-tops10 ++ exit ;; ++ *:TENEX:*:*) ++ echo pdp10-unknown-tenex ++ exit ;; ++ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) ++ echo pdp10-dec-tops20 ++ exit ;; ++ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) ++ echo pdp10-xkl-tops20 ++ exit ;; ++ *:TOPS-20:*:*) ++ echo pdp10-unknown-tops20 ++ exit ;; ++ *:ITS:*:*) ++ echo pdp10-unknown-its ++ exit ;; ++ SEI:*:*:SEIUX) ++ echo mips-sei-seiux${UNAME_RELEASE} ++ exit ;; ++ *:DragonFly:*:*) ++ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ++ exit ;; ++ *:*VMS:*:*) ++ UNAME_MACHINE=`(uname -p) 2>/dev/null` ++ case "${UNAME_MACHINE}" in ++ A*) echo alpha-dec-vms ; exit ;; ++ I*) echo ia64-dec-vms ; exit ;; ++ V*) echo vax-dec-vms ; exit ;; ++ esac ;; ++ *:XENIX:*:SysV) ++ echo i386-pc-xenix ++ exit ;; ++ i*86:skyos:*:*) ++ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' ++ exit ;; ++ i*86:rdos:*:*) ++ echo ${UNAME_MACHINE}-pc-rdos ++ exit ;; + esac + + #echo '(No uname command or uname output not recognized.)' 1>&2 + #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +-cat >dummy.c <$dummy.c < + # include +@@ -582,7 +1345,7 @@ main () + #endif + + #if defined (__arm) && defined (__acorn) && defined (__unix) +- printf ("arm-acorn-riscix"); exit (0); ++ printf ("arm-acorn-riscix\n"); exit (0); + #endif + + #if defined (hp300) && !defined (hpux) +@@ -595,7 +1358,10 @@ main () + #endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; +- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); ++ if (version < 4) ++ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); ++ else ++ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); + #endif + +@@ -640,11 +1406,24 @@ main () + #endif + + #if defined (vax) +-#if !defined (ultrix) +- printf ("vax-dec-bsd\n"); exit (0); +-#else +- printf ("vax-dec-ultrix\n"); exit (0); +-#endif ++# if !defined (ultrix) ++# include ++# if defined (BSD) ++# if BSD == 43 ++ printf ("vax-dec-bsd4.3\n"); exit (0); ++# else ++# if BSD == 199006 ++ printf ("vax-dec-bsd4.3reno\n"); exit (0); ++# else ++ printf ("vax-dec-bsd\n"); exit (0); ++# endif ++# endif ++# else ++ printf ("vax-dec-bsd\n"); exit (0); ++# endif ++# else ++ printf ("vax-dec-ultrix\n"); exit (0); ++# endif + #endif + + #if defined (alliant) && defined (i860) +@@ -655,12 +1434,12 @@ main () + } + EOF + +-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 +-rm -f dummy.c dummy ++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && ++ { echo "$SYSTEM_NAME"; exit; } + + # Apollos put the system type in the environment. + +-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } ++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + + # Convex versions that predate uname can use getsysinfo(1) + +@@ -669,25 +1448,69 @@ then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd +- exit 0 ;; ++ exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi +- exit 0 ;; ++ exit ;; + c34*) + echo c34-convex-bsd +- exit 0 ;; ++ exit ;; + c38*) + echo c38-convex-bsd +- exit 0 ;; ++ exit ;; + c4*) + echo c4-convex-bsd +- exit 0 ;; ++ exit ;; + esac + fi + +-#echo '(Unable to guess system type)' 1>&2 ++cat >&2 < in order to provide the needed ++information to handle your system. ++ ++config.guess timestamp = $timestamp ++ ++uname -m = `(uname -m) 2>/dev/null || echo unknown` ++uname -r = `(uname -r) 2>/dev/null || echo unknown` ++uname -s = `(uname -s) 2>/dev/null || echo unknown` ++uname -v = `(uname -v) 2>/dev/null || echo unknown` ++ ++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` ++/bin/uname -X = `(/bin/uname -X) 2>/dev/null` ++ ++hostinfo = `(hostinfo) 2>/dev/null` ++/bin/universe = `(/bin/universe) 2>/dev/null` ++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` ++/bin/arch = `(/bin/arch) 2>/dev/null` ++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` ++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` ++ ++UNAME_MACHINE = ${UNAME_MACHINE} ++UNAME_RELEASE = ${UNAME_RELEASE} ++UNAME_SYSTEM = ${UNAME_SYSTEM} ++UNAME_VERSION = ${UNAME_VERSION} ++EOF + + exit 1 ++ ++# Local variables: ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "timestamp='" ++# time-stamp-format: "%:y-%02m-%02d" ++# time-stamp-end: "'" ++# End: --- netdiag-1.1.orig/debian/po/POTFILES.in +++ netdiag-1.1/debian/po/POTFILES.in @@ -0,0 +1 @@ +[type: gettext/rfc822deb] templates --- netdiag-1.1.orig/debian/po/cs.po +++ netdiag-1.1/debian/po/cs.po @@ -0,0 +1,33 @@ +# Czech translation of netdiag debconf messages +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the netdiag package. +# Miroslav Kure , 2006, 2007. +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-07-07 21:31+0200\n" +"Last-Translator: Miroslav Kure \n" +"Language-Team: Czech \n" +"Language: cs\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Spustit statnetd při zavádění systému?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Vyberte si, zda se má statnetd spouštět během zavádění systému. Své " +"rozhodnutí můžete později změnit úpravou souboru /etc/default/netdiag." --- netdiag-1.1.orig/debian/po/da.po +++ netdiag-1.1/debian/po/da.po @@ -0,0 +1,34 @@ +# Danish translation netdiag. +# Copyright (C) netdiag & nedenstående oversættere. +# This file is distributed under the same license as the netdiag package. +# Joe Hansen (joedalton2@yahoo.dk), 2011. +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2011-05-28 18:30+01:00\n" +"Last-Translator: Joe Hansen \n" +"Language-Team: Danish \n" +"Language: da\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Igangsæt statnetd ved opstart?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Angiv venligst hvorvidt statnetd skal igangsættes som en del af " +"opstartsprocessen. Dette kan ændres senere ved at redigere /etc/default/" +"netdiag." --- netdiag-1.1.orig/debian/po/de.po +++ netdiag-1.1/debian/po/de.po @@ -0,0 +1,33 @@ +# German translation of netdiag templates +# Michael Meskes , 2007 +# Helge Kreutzmann , 2007 +# This file is distributed under the same license as the netdiag package. +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-2\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-08-10 19:05+0200\n" +"Last-Translator: Helge Kreutzmann \n" +"Language-Team: German \n" +"Language: de\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Statnetd im Bootprozess starten?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Bitte geben Sie an, ob Statnetd als Teil des Bootprozesses gestartet werden " +"soll. Dies kann später in der Datei /etc/default/netdiag geändert werden." --- netdiag-1.1.orig/debian/po/es.po +++ netdiag-1.1/debian/po/es.po @@ -0,0 +1,54 @@ +# netdiag translation to spanish +# Copyright (C) 2004-2007 Software in the Public Interest +# This file is distributed under the same license as the netdiag package. +# +# Changes: +# - Initial translation +# Enrique Monge , 2007 +# +# Traductores, si no conoce el formato PO, merece la pena leer la +# documentación de gettext, especialmente las secciones dedicadas a este +# formato, por ejemplo ejecutando: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# Equipo de traducción al español, por favor, lean antes de traducir +# los siguientes documentos: +# +# - El proyecto de traducción de Debian al español +# http://www.debian.org/intl/spanish/ +# especialmente las notas de traducción en +# http://www.debian.org/intl/spanish/notas +# +# - La guía de traducción de po's de debconf: +# /usr/share/doc/po-debconf/README-trans +# o http://www.debian.org/intl/l10n/po-debconf/README-trans +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-2\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-08-21 18:18-0600\n" +"Last-Translator: Enrique Monge \n" +"Language-Team: Debian Spanish \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "¿Desea arrancar «statnetd» al iniciar el sistema?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Por favor, especifique si «statnetd» debe arrancar como parte del proceso de " +"inicio. Esto puede modificarse posteriormente editando el fichero «/etc/" +"default/netdiag»." --- netdiag-1.1.orig/debian/po/fr.po +++ netdiag-1.1/debian/po/fr.po @@ -0,0 +1,35 @@ +# Copyright (C) 2006 Frédéric ZULIAN , Christian Perrier , 2007. +# This file is distributed under the same license as the netdiag package. +# Relecteurs :Jean-Baka Domelevo-Entfellner , +# Christian Perrier , Olivier Trichet +# Thomas Huriaux et Frédéric Bothamy +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-2\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-07-11 19:54+0200\n" +"Last-Translator: Christian Perrier \n" +"Language-Team: French \n" +"Language: fr\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.4 \n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Faut-il lancer statnetd au démarrage ?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Veuillez indiquer si vous désirez démarrer statnetd à l'amorçage de " +"l'ordinateur. Vous pourrez changer ce comportement plus tard en modifiant le " +"fichier /etc/default/netdiag." --- netdiag-1.1.orig/debian/po/gl.po +++ netdiag-1.1/debian/po/gl.po @@ -0,0 +1,32 @@ +# Galician translation of netdiag's debconf templates +# This file is distributed under the same license as the netdiag package. +# Jacobo Tarrio , 2007. +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-2\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-07-02 17:48+0200\n" +"Last-Translator: Jacobo Tarrio \n" +"Language-Team: Galician \n" +"Language: gl\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "¿Iniciar startnetd co ordenador?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Indique se quere que statnetd se inicie coma unha parte do proceso de inicio " +"do sistema. Isto pódese cambiar máis tarde editando /etc/default/netdiag." --- netdiag-1.1.orig/debian/po/it.po +++ netdiag-1.1/debian/po/it.po @@ -0,0 +1,34 @@ +# Italian (it) translation of debconf templates for netdiag +# Copyright (C) 2008 Software in the Public Interest +# This file is distributed under the same license as the netdiag package. +# Luca Monducci , 2008. +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-11\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2008-11-15 20:42+0100\n" +"Last-Translator: Luca Monducci \n" +"Language-Team: Italian \n" +"Language: it\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Attivare statnetd all'avvio?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Indicare se statnetd deve essere attivato durante il processo d'avvio. In " +"seguito è possibile modificare questa impostazione modificando /etc/default/" +"netdiag." --- netdiag-1.1.orig/debian/po/ja.po +++ netdiag-1.1/debian/po/ja.po @@ -0,0 +1,34 @@ +# Japanese debconf templates translation for netdiag. +# Copyright (C) 2007-2009 Michael Meskes +# This file is distributed under the same license as the netdiag package. +# Noritada Kobayashi , 2007. +# Hideki Yamane (Debian-JP) , 2009. +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-12\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2009-01-05 22:44+0900\n" +"Last-Translator: Hideki Yamane (Debian-JP) \n" +"Language-Team: Japanese \n" +"Language: ja\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "システム起動時に netdiag を起動しますか?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"起動プロセスの一部として statnetd を起動させるかどうか指定してください。この" +"指定は、/etc/default/netdiag を編集して後から変更することも可能です。" --- netdiag-1.1.orig/debian/po/nl.po +++ netdiag-1.1/debian/po/nl.po @@ -0,0 +1,47 @@ +# translation of netdiag templates.pot to debian-l10n-dutch +# This file is distributed under the same license as the netdiag package. +# +# Translators, if you are not familiar with the PO format, gettext +# documentation is worth reading, especially sections dedicated to +# this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# Some information specific to po-debconf are available at +# /usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans# +# Developers do not need to manually edit POT or PO files. +# +# Kurt De Bree , 2006 +# This is an unofficial translation +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2006-08-07 18:18+0200\n" +"Last-Translator: Kurt De Bree \n" +"Language-Team: debian-l10n-dutch \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.10.2\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "statnetd starten tijdens opstarten van het systeem?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Gelieve aan te geven of statnetd gestart dient te worden tijdens het " +"opstarten van het systeem. Dit kan later aangepast worden door /etc/default/" +"netdiag te wijzigen." --- netdiag-1.1.orig/debian/po/pt.po +++ netdiag-1.1/debian/po/pt.po @@ -0,0 +1,36 @@ +# Portuguese translation of netdiag +# Copyright (C) 2006 THE netdiag'S COPYRIGHT HOLDER +# This file is distributed under the same license as the netdiag package. +# Rui Branco , 2006. +# Miguel Figueiredo , 2007. +# +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1-0.2\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-07-15 20:54+0100\n" +"Last-Translator: Miguel Figueiredo \n" +"Language-Team: Portuguese \n" +"Language: pt\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Iniciar o statnetd durante o arranque?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Especifique se quer que o statnetd arranque com parte do processo de " +"arranque. Pode no entanto alterar esta opção editando o ficheiro /etc/" +"default/netdiag." --- netdiag-1.1.orig/debian/po/pt_BR.po +++ netdiag-1.1/debian/po/pt_BR.po @@ -0,0 +1,35 @@ +# Debconf translations for netdiag. +# Copyright (C) 2012 THE netdiag'S COPYRIGHT HOLDER +# This file is distributed under the same license as the netdiag package. +# José dos Santos Júnior , 2012. +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-19\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2012-03-04 13:47-0300\n" +"Last-Translator: J.S.Júnior \n" +"Language-Team: Brazilian Portuguese \n" +"Language: pt_BR\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Iniciar o statnetd na inicialização do sistema?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Por favor, especifique se o statnetd deverá ser iniciado como parte do " +"processo de inicialização do sistema. Isso pode ser alterado mais tarde " +"editando o arquivo /etc/default/netdiag." --- netdiag-1.1.orig/debian/po/ru.po +++ netdiag-1.1/debian/po/ru.po @@ -0,0 +1,36 @@ +# translation of templates-2.po to Russian +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# +# Yuri Kozlov , 2007. +msgid "" +msgstr "" +"Project-Id-Version: netdiag 1.0-2\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-07-08 19:33+0400\n" +"Last-Translator: Yuri Kozlov \n" +"Language-Team: Russian \n" +"Language: ru\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.4\n" +"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n" +"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2); \n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Запускать statnetd при загрузке системы?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Укажите, нужно ли запускать statnetd в процессе загрузки системы. Это можно " +"изменить позже отредактировав файл /etc/default/netdiag." --- netdiag-1.1.orig/debian/po/sv.po +++ netdiag-1.1/debian/po/sv.po @@ -0,0 +1,34 @@ +# translation of netdiag.po to swedish +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# +# Martin Bagge , 2008. +msgid "" +msgstr "" +"Project-Id-Version: netdiag\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2008-10-26 23:40+0100\n" +"Last-Translator: Martin Bagge \n" +"Language-Team: swedish \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.11.4\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Ska statnetd starts vid systemets uppstart?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Ange om d uvill att statnetd ska startas när systemet startas. Detta kan " +"manuellt förändras senare genom filen /etc/default/netdiag." --- netdiag-1.1.orig/debian/po/templates.pot +++ netdiag-1.1/debian/po/templates.pot @@ -0,0 +1,31 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" --- netdiag-1.1.orig/debian/po/vi.po +++ netdiag-1.1/debian/po/vi.po @@ -0,0 +1,34 @@ +# Vietnamese translation for NetDiag. +# Copyright © 2007 Free Software Foundation, Inc. +# Clytie Siddall , 2007 +# +msgid "" +msgstr "" +"Project-Id-Version: netdiag\n" +"Report-Msgid-Bugs-To: meskes@debian.org\n" +"POT-Creation-Date: 2007-07-30 13:56+0200\n" +"PO-Revision-Date: 2007-08-01 16:18+0930\n" +"Last-Translator: Clytie Siddall \n" +"Language-Team: Vietnamese \n" +"Language: vi\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" +"X-Generator: LocFactoryEditor 1.7b1\n" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "Start statnetd at boot time?" +msgstr "Khởi chạy statnetd vào lúc khởi động không?" + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid "" +"Please specify whether statnetd should be started as part of the boot " +"process. This can be changed later by editing /etc/default/netdiag." +msgstr "" +"Hãy xác định có nên khởi chạy statnetd trong tiến trình khởi động hay không. " +"Vẫn còn có thể sửa đổi sau trong tập tin « /etc/default/netdiag »." --- netdiag-1.1.orig/debian/postinst +++ netdiag-1.1/debian/postinst @@ -0,0 +1,52 @@ +#!/bin/sh +set -e + +if [ "$1" = configure ] +then + . /usr/share/debconf/confmodule + + default_format="\ +# Start statnetd at boot time? 0 or 1 +run_statnetd=%s +# Specify additional statnetd options here (see manpage). +" + + # Determine whether to start watchdog at boot time. + db_get netdiag/run_statnetd + case $RET in + false) run_statnetd=0;; + *) run_statnetd=1;; + esac + + # Create an up-to-date copy of the default file. + { + # If it already exists, preserve everything except our comment + # and $run_statnetd. + if [ -f /etc/default/netdiag ] + then + printf "$default_format" '.*' '.*' \ + | grep -vxf - /etc/default/netdiag \ + | grep -v statnetd_options || true + fi + + # Append our comment and the current value. + printf "$default_format" "$run_statnetd" + + # And finally preserve the statnetd_options setting. + if [ -f /etc/default/netdiag ] + then + grep statnetd_options /etc/default/netdiag || true + fi + } > /etc/default/netdiag.dpkg-new + + # Replace the original file atomically. + mv /etc/default/netdiag.dpkg-new /etc/default/netdiag + + # + # stop debconf + # + db_stop +fi + +#DEBHELPER# + --- netdiag-1.1.orig/debian/postrm +++ netdiag-1.1/debian/postrm @@ -0,0 +1,11 @@ +#!/bin/sh + +set -e + +# Remove generated default file. +if [ "$1" = "purge" ]; then + rm -f /etc/default/netdiag +fi + +#DEBHELPER# + --- netdiag-1.1.orig/debian/rules +++ netdiag-1.1/debian/rules @@ -0,0 +1,116 @@ +#!/usr/bin/make -f +# -*- makefile -*- + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +include /usr/share/quilt/quilt.make + +CFLAGS = -Wall -g + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif + +configure: configure-stamp +configure-stamp: + dh_testdir + dh_autotools-dev_updateconfig + # Add here commands to configure the package. + (cd trafshow*; ./configure) + (cd netwatch*; ./configure) + (cd tcpblast*; automake --add-missing; ./configure) + + touch configure-stamp + + +build: build-arch build-indep +build-arch: build-stamp +build-indep: build-stamp +build-stamp: patch configure-stamp + dh_testdir + + # Add here commands to compile the package. + (cd tcpspray; make) + (cd statnet*; make) + (cd trafshow*; make) + (cd netwatch*; make) + (cd tcpblast*; make) + (cd netload*; make) + + touch $@ + +clean: unpatch + dh_testdir + dh_testroot + rm -f build-stamp configure-stamp + + # Add here commands to clean up after the build process. + (cd tcpspray; make clean) + (cd statnet*; make clean; rm -f statnet.1 statnet.lsm) + (cd trafshow*; [ ! -f Makefile ] || make distclean; rm -f config.log) + (cd netwatch*; make clean; rm -f Makefile Make.common) + (cd tcpblast*; [ ! -f Makefile ] || make distclean; rm -f config.sub config.guess config.log) + (cd netload*; make clean) + + debconf-updatepo + + dh_autotools-dev_restoreconfig + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/netdiag. + (cd statnet*; \ + make install INSTALLDIR=$(CURDIR)/debian/netdiag/usr/sbin; \ + mv $(CURDIR)/debian/netdiag/usr/sbin/statnet $(CURDIR)/debian/netdiag/usr/bin) + (cd tcpspray; \ + make install BINDIR=$(CURDIR)/debian/netdiag/usr/bin) + (cd netwatch*; \ + make install INSTALLDIR=$(CURDIR)/debian/netdiag/usr; \ + mv $(CURDIR)/debian/netdiag/usr/bin/netresolv $(CURDIR)/debian/netdiag/usr/lib/netdiag) + (cd trafshow*; \ + make install prefix=$(CURDIR)/debian/netdiag/usr \ + MANDEST=$(CURDIR)/debian/netdiag/usr/share/man \ + BINDEST=$(CURDIR)/debian/netdiag/usr/sbin) + (cd tcpblast*; \ + make install prefix=$(CURDIR)/debian/netdiag/usr \ + mandir=$(CURDIR)/debian/netdiag/usr/share/man) + (cd netload*; \ + make install TARGET=$(CURDIR)/debian/netdiag/usr/bin \ + MANTARGET=$(CURDIR)/debian/netdiag/usr/share/man/man1) + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_installchangelogs + dh_installdocs + dh_installexamples netwatch*/netwatch.conf.eg + dh_install + dh_installmenu + dh_installdebconf + dh_installinit + dh_installman statnet*/statnet.1 tcpspray/tcpspray.1 + dh_link + dh_strip + dh_compress + dh_fixperms + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure --- netdiag-1.1.orig/debian/source/format +++ netdiag-1.1/debian/source/format @@ -0,0 +1 @@ +1.0 --- netdiag-1.1.orig/debian/templates +++ netdiag-1.1/debian/templates @@ -0,0 +1,7 @@ +Template: netdiag/run_statnetd +Type: boolean +Default: true +_Description: Start statnetd at boot time? + Please specify whether statnetd should be started as part of the boot + process. This can be changed later by editing /etc/default/netdiag. +