vigor-0.016.orig/0040755000076400007640000000000007103707317012276 5ustar cjw44cjw44vigor-0.016.orig/common/0040755000076400007640000000000007103707216013564 5ustar cjw44cjw44vigor-0.016.orig/common/util.h0100644000076400007640000000361707103707215014715 0ustar cjw44cjw44/*- * Copyright (c) 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)util.h 10.5 (Berkeley) 3/16/96 */ /* Macros to init/set/clear/test flags. */ #define FL_INIT(l, f) (l) = (f) /* Specific flags location. */ #define FL_SET(l, f) ((l) |= (f)) #define FL_CLR(l, f) ((l) &= ~(f)) #define FL_ISSET(l, f) ((l) & (f)) #define LF_INIT(f) FL_INIT(flags, f) /* Local variable flags. */ #define LF_SET(f) FL_SET(flags, f) #define LF_CLR(f) FL_CLR(flags, f) #define LF_ISSET(f) FL_ISSET(flags, f) #define F_INIT(p, f) FL_INIT((p)->flags, f) /* Structure element flags. */ #define F_SET(p, f) FL_SET((p)->flags, f) #define F_CLR(p, f) FL_CLR((p)->flags, f) #define F_ISSET(p, f) FL_ISSET((p)->flags, f) /* Offset to next column of stop size, e.g. tab offsets. */ #define COL_OFF(c, stop) ((stop) - ((c) % (stop))) /* Busy message types. */ typedef enum { B_NONE, B_OFF, B_READ, B_RECOVER, B_SEARCH, B_WRITE } bmsg_t; /* * Number handling defines and protoypes. * * NNFITS: test for addition of two negative numbers under a limit * NPFITS: test for addition of two positive numbers under a limit * NADD_SLONG: test for addition of two signed longs * NADD_USLONG: test for addition of two unsigned longs */ enum nresult { NUM_ERR, NUM_OK, NUM_OVER, NUM_UNDER }; #define NNFITS(min, cur, add) \ (((long)(min)) - (cur) <= (add)) #define NPFITS(max, cur, add) \ (((unsigned long)(max)) - (cur) >= (add)) #define NADD_SLONG(sp, v1, v2) \ ((v1) < 0 ? \ ((v2) < 0 && \ NNFITS(LONG_MIN, (v1), (v2))) ? NUM_UNDER : NUM_OK : \ (v1) > 0 ? \ (v2) > 0 && \ NPFITS(LONG_MAX, (v1), (v2)) ? NUM_OK : NUM_OVER : \ NUM_OK) #define NADD_USLONG(sp, v1, v2) \ (NPFITS(ULONG_MAX, (v1), (v2)) ? NUM_OK : NUM_OVER) vigor-0.016.orig/common/api.c0100644000076400007640000002204507103707215014500 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * Copyright (c) 1995 * George V. Neville-Neil. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)api.c 8.26 (Berkeley) 10/14/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" extern GS *__global_list; /* XXX */ /* * api_fscreen -- * Return a pointer to the screen specified by the screen id * or a file name. * * PUBLIC: SCR *api_fscreen __P((int, char *)); */ SCR * api_fscreen(id, name) int id; char *name; { GS *gp; SCR *tsp; gp = __global_list; /* Search the displayed list. */ for (tsp = gp->dq.cqh_first; tsp != (void *)&gp->dq; tsp = tsp->q.cqe_next) if (name == NULL) { if (id == tsp->id) return (tsp); } else if (!strcmp(name, tsp->frp->name)) return (tsp); /* Search the hidden list. */ for (tsp = gp->hq.cqh_first; tsp != (void *)&gp->hq; tsp = tsp->q.cqe_next) if (name == NULL) { if (id == tsp->id) return (tsp); } else if (!strcmp(name, tsp->frp->name)) return (tsp); return (NULL); } /* * api_aline -- * Append a line. * * PUBLIC: int api_aline __P((SCR *, recno_t, char *, size_t)); */ int api_aline(sp, lno, line, len) SCR *sp; recno_t lno; char *line; size_t len; { return (db_append(sp, 1, lno, line, len)); } /* * api_dline -- * Delete a line. * * PUBLIC: int api_dline __P((SCR *, recno_t)); */ int api_dline(sp, lno) SCR *sp; recno_t lno; { return (db_delete(sp, lno)); } /* * api_gline -- * Get a line. * * PUBLIC: int api_gline __P((SCR *, recno_t, char **, size_t *)); */ int api_gline(sp, lno, linepp, lenp) SCR *sp; recno_t lno; char **linepp; size_t *lenp; { int isempty; if (db_eget(sp, lno, linepp, lenp, &isempty)) { if (isempty) msgq(sp, M_ERR, "209|The file is empty"); return (1); } return (0); } /* * api_iline -- * Insert a line. * * PUBLIC: int api_iline __P((SCR *, recno_t, char *, size_t)); */ int api_iline(sp, lno, line, len) SCR *sp; recno_t lno; char *line; size_t len; { return (db_insert(sp, lno, line, len)); } /* * api_lline -- * Return the line number of the last line in the file. * * PUBLIC: int api_lline __P((SCR *, recno_t *)); */ int api_lline(sp, lnop) SCR *sp; recno_t *lnop; { return (db_last(sp, lnop)); } /* * api_sline -- * Set a line. * * PUBLIC: int api_sline __P((SCR *, recno_t, char *, size_t)); */ int api_sline(sp, lno, line, len) SCR *sp; recno_t lno; char *line; size_t len; { return (db_set(sp, lno, line, len)); } /* * api_getmark -- * Get the mark. * * PUBLIC: int api_getmark __P((SCR *, int, MARK *)); */ int api_getmark(sp, markname, mp) SCR *sp; int markname; MARK *mp; { return (mark_get(sp, (ARG_CHAR_T)markname, mp, M_ERR)); } /* * api_setmark -- * Set the mark. * * PUBLIC: int api_setmark __P((SCR *, int, MARK *)); */ int api_setmark(sp, markname, mp) SCR *sp; int markname; MARK *mp; { return (mark_set(sp, (ARG_CHAR_T)markname, mp, 1)); } /* * api_nextmark -- * Return the first mark if next not set, otherwise return the * subsequent mark. * * PUBLIC: int api_nextmark __P((SCR *, int, char *)); */ int api_nextmark(sp, next, namep) SCR *sp; int next; char *namep; { LMARK *mp; mp = sp->ep->marks.lh_first; if (next) for (; mp != NULL; mp = mp->q.le_next) if (mp->name == *namep) { mp = mp->q.le_next; break; } if (mp == NULL) return (1); *namep = mp->name; return (0); } /* * api_getcursor -- * Get the cursor. * * PUBLIC: int api_getcursor __P((SCR *, MARK *)); */ int api_getcursor(sp, mp) SCR *sp; MARK *mp; { mp->lno = sp->lno; mp->cno = sp->cno; return (0); } /* * api_setcursor -- * Set the cursor. * * PUBLIC: int api_setcursor __P((SCR *, MARK *)); */ int api_setcursor(sp, mp) SCR *sp; MARK *mp; { size_t len; if (db_get(sp, mp->lno, DBG_FATAL, NULL, &len)) return (1); if (mp->cno < 0 || mp->cno > len) { msgq(sp, M_ERR, "Cursor set to nonexistent column"); return (1); } /* Set the cursor. */ sp->lno = mp->lno; sp->cno = mp->cno; return (0); } /* * api_emessage -- * Print an error message. * * PUBLIC: void api_emessage __P((SCR *, char *)); */ void api_emessage(sp, text) SCR *sp; char *text; { msgq(sp, M_ERR, "%s", text); } /* * api_imessage -- * Print an informational message. * * PUBLIC: void api_imessage __P((SCR *, char *)); */ void api_imessage(sp, text) SCR *sp; char *text; { msgq(sp, M_INFO, "%s", text); } /* * api_edit * Create a new screen and return its id * or edit a new file in the current screen. * * PUBLIC: int api_edit __P((SCR *, char *, SCR **, int)); */ int api_edit(sp, file, spp, newscreen) SCR *sp; char *file; SCR **spp; int newscreen; { ARGS *ap[2], a; EXCMD cmd; if (file) { ex_cinit(&cmd, C_EDIT, 0, OOBLNO, OOBLNO, 0, ap); ex_cadd(&cmd, &a, file, strlen(file)); } else ex_cinit(&cmd, C_EDIT, 0, OOBLNO, OOBLNO, 0, NULL); if (newscreen) cmd.flags |= E_NEWSCREEN; /* XXX */ if (cmd.cmd->fn(sp, &cmd)) return (1); *spp = sp->nextdisp; return (0); } /* * api_escreen * End a screen. * * PUBLIC: int api_escreen __P((SCR *)); */ int api_escreen(sp) SCR *sp; { EXCMD cmd; /* * XXX * If the interpreter exits anything other than the current * screen, vi isn't going to update everything correctly. */ ex_cinit(&cmd, C_QUIT, 0, OOBLNO, OOBLNO, 0, NULL); return (cmd.cmd->fn(sp, &cmd)); } /* * api_swscreen -- * Switch to a new screen. * * PUBLIC: int api_swscreen __P((SCR *, SCR *)); */ int api_swscreen(sp, new) SCR *sp, *new; { /* * XXX * If the interpreter switches from anything other than the * current screen, vi isn't going to update everything correctly. */ sp->nextdisp = new; F_SET(sp, SC_SSWITCH); return (0); } /* * api_map -- * Map a key. * * PUBLIC: int api_map __P((SCR *, char *, char *, size_t)); */ int api_map(sp, name, map, len) SCR *sp; char *name, *map; size_t len; { ARGS *ap[3], a, b; EXCMD cmd; ex_cinit(&cmd, C_MAP, 0, OOBLNO, OOBLNO, 0, ap); ex_cadd(&cmd, &a, name, strlen(name)); ex_cadd(&cmd, &b, map, len); return (cmd.cmd->fn(sp, &cmd)); } /* * api_unmap -- * Unmap a key. * * PUBLIC: int api_unmap __P((SCR *, char *)); */ int api_unmap(sp, name) SCR *sp; char *name; { ARGS *ap[2], a; EXCMD cmd; ex_cinit(&cmd, C_UNMAP, 0, OOBLNO, OOBLNO, 0, ap); ex_cadd(&cmd, &a, name, strlen(name)); return (cmd.cmd->fn(sp, &cmd)); } /* * api_opts_get -- * Return a option value as a string, in allocated memory. * If the option is of type boolean, boolvalue is (un)set * according to the value; otherwise boolvalue is -1. * * PUBLIC: int api_opts_get __P((SCR *, char *, char **, int *)); */ int api_opts_get(sp, name, value, boolvalue) SCR *sp; char *name, **value; int *boolvalue; { OPTLIST const *op; int offset; if ((op = opts_search(name)) == NULL) { opts_nomatch(sp, name); return (1); } offset = op - optlist; if (boolvalue != NULL) *boolvalue = -1; switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: MALLOC_RET(sp, *value, char *, strlen(op->name) + 2 + 1); (void)sprintf(*value, "%s%s", O_ISSET(sp, offset) ? "" : "no", op->name); if (boolvalue != NULL) *boolvalue = O_ISSET(sp, offset); break; case OPT_NUM: MALLOC_RET(sp, *value, char *, 20); (void)sprintf(*value, "%lu", (u_long)O_VAL(sp, offset)); break; case OPT_STR: if (O_STR(sp, offset) == NULL) { MALLOC_RET(sp, *value, char *, 2); value[0] = '\0'; } else { MALLOC_RET(sp, *value, char *, strlen(O_STR(sp, offset)) + 1); (void)sprintf(*value, "%s", O_STR(sp, offset)); } break; } return (0); } /* * api_opts_set -- * Set options. * * PUBLIC: int api_opts_set __P((SCR *, char *, char *, u_long, int)); */ int api_opts_set(sp, name, str_value, num_value, bool_value) SCR *sp; char *name, *str_value; u_long num_value; int bool_value; { ARGS *ap[2], a, b; OPTLIST const *op; int rval; size_t blen; char *bp; if ((op = opts_search(name)) == NULL) { opts_nomatch(sp, name); return (1); } switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: GET_SPACE_RET(sp, bp, blen, 64); a.len = snprintf(bp, 64, "%s%s", bool_value ? "" : "no", name); break; case OPT_NUM: GET_SPACE_RET(sp, bp, blen, 64); a.len = snprintf(bp, 64, "%s=%lu", name, num_value); break; case OPT_STR: GET_SPACE_RET(sp, bp, blen, 1024); a.len = snprintf(bp, 1024, "%s=%s", name, str_value); break; } a.bp = bp; b.len = 0; b.bp = NULL; ap[0] = &a; ap[1] = &b; rval = opts_set(sp, ap, NULL); FREE_SPACE(sp, bp, blen); return (rval); } /* * api_run_str -- * Execute a string as an ex command. * * PUBLIC: int api_run_str __P((SCR *, char *)); */ int api_run_str(sp, cmd) SCR *sp; char *cmd; { return (ex_run_str(sp, NULL, cmd, strlen(cmd), 0, 0)); } vigor-0.016.orig/common/args.h0100644000076400007640000000156407103707215014673 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)args.h 10.2 (Berkeley) 3/6/96 */ /* * Structure for building "argc/argv" vector of arguments. * * !!! * All arguments are nul terminated as well as having an associated length. * The argument vector is NOT necessarily NULL terminated. The proper way * to check the number of arguments is to use the argc value in the EXCMDARG * structure or to walk the array until an ARGS structure with a length of 0 * is found. */ typedef struct _args { CHAR_T *bp; /* Argument. */ size_t blen; /* Buffer length. */ size_t len; /* Argument length. */ #define A_ALLOCATED 0x01 /* If allocated space. */ u_int8_t flags; } ARGS; vigor-0.016.orig/common/common.h0100644000076400007640000000515107103707215015223 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)common.h 10.13 (Berkeley) 9/25/96 */ /* * Porting information built at configuration time. Included before * any of nvi's include files. */ #include "port.h" /* * Pseudo-local includes. These are files that are unlikely to exist * on most machines to which we're porting vi, and we want to include * them in a very specific order, regardless. */ #include #include /* * Forward structure declarations. Not pretty, but the include files * are far too interrelated for a clean solution. */ typedef struct _cb CB; typedef struct _csc CSC; typedef struct _event EVENT; typedef struct _excmd EXCMD; typedef struct _exf EXF; typedef struct _fref FREF; typedef struct _gs GS; typedef struct _lmark LMARK; typedef struct _mark MARK; typedef struct _msg MSGS; typedef struct _option OPTION; typedef struct _optlist OPTLIST; typedef struct _scr SCR; typedef struct _script SCRIPT; typedef struct _seq SEQ; typedef struct _tag TAG; typedef struct _tagf TAGF; typedef struct _tagq TAGQ; typedef struct _text TEXT; /* Autoindent state. */ typedef enum { C_NOTSET, C_CARATSET, C_NOCHANGE, C_ZEROSET } carat_t; /* Busy message types. */ typedef enum { BUSY_ON = 1, BUSY_OFF, BUSY_UPDATE } busy_t; /* * Routines that return a confirmation return: * * CONF_NO User answered no. * CONF_QUIT User answered quit, eof or an error. * CONF_YES User answered yes. */ typedef enum { CONF_NO, CONF_QUIT, CONF_YES } conf_t; /* Directions. */ typedef enum { NOTSET, FORWARD, BACKWARD } dir_t; /* Line operations. */ typedef enum { LINE_APPEND, LINE_DELETE, LINE_INSERT, LINE_RESET } lnop_t; /* Lock return values. */ typedef enum { LOCK_FAILED, LOCK_SUCCESS, LOCK_UNAVAIL } lockr_t; /* Sequence types. */ typedef enum { SEQ_ABBREV, SEQ_COMMAND, SEQ_INPUT } seq_t; /* * Local includes. */ #include "key.h" /* Required by args.h. */ #include "args.h" /* Required by options.h. */ #include "options.h" /* Required by screen.h. */ #include "msg.h" /* Required by gs.h. */ #include "cut.h" /* Required by gs.h. */ #include "seq.h" /* Required by screen.h. */ #include "util.h" /* Required by ex.h. */ #include "mark.h" /* Required by gs.h. */ #include "../ex/ex.h" /* Required by gs.h. */ #include "gs.h" /* Required by screen.h. */ #include "screen.h" /* Required by exf.h. */ #include "exf.h" #include "log.h" #include "mem.h" #include "com_extern.h" vigor-0.016.orig/common/cut.c0100644000076400007640000002141407103707215014521 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cut.c 10.10 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "common.h" static void cb_rotate __P((SCR *)); /* * cut -- * Put a range of lines/columns into a TEXT buffer. * * There are two buffer areas, both found in the global structure. The first * is the linked list of all the buffers the user has named, the second is the * unnamed buffer storage. There is a pointer, too, which is the current * default buffer, i.e. it may point to the unnamed buffer or a named buffer * depending on into what buffer the last text was cut. Logically, in both * delete and yank operations, if the user names a buffer, the text is cut * into it. If it's a delete of information on more than a single line, the * contents of the numbered buffers are rotated up one, the contents of the * buffer named '9' are discarded, and the text is cut into the buffer named * '1'. The text is always cut into the unnamed buffer. * * In all cases, upper-case buffer names are the same as lower-case names, * with the exception that they cause the buffer to be appended to instead * of replaced. Note, however, that if text is appended to a buffer, the * default buffer only contains the appended text, not the entire contents * of the buffer. * * !!! * The contents of the default buffer would disappear after most operations * in historic vi. It's unclear that this is useful, so we don't bother. * * When users explicitly cut text into the numeric buffers, historic vi became * genuinely strange. I've never been able to figure out what was supposed to * happen. It behaved differently if you deleted text than if you yanked text, * and, in the latter case, the text was appended to the buffer instead of * replacing the contents. Hopefully it's not worth getting right, and here * we just treat the numeric buffers like any other named buffer. * * PUBLIC: int cut __P((SCR *, CHAR_T *, MARK *, MARK *, int)); */ int cut(sp, namep, fm, tm, flags) SCR *sp; CHAR_T *namep; MARK *fm, *tm; int flags; { CB *cbp; CHAR_T name; recno_t lno; int append, copy_one, copy_def; /* * If the user specified a buffer, put it there. (This may require * a copy into the numeric buffers. We do the copy so that we don't * have to reference count and so we don't have to deal with things * like appends to buffers that are used multiple times.) * * Otherwise, if it's supposed to be put in a numeric buffer (usually * a delete) put it there. The rules for putting things in numeric * buffers were historically a little strange. There were three cases. * * 1: Some motions are always line mode motions, which means * that the cut always goes into the numeric buffers. * 2: Some motions aren't line mode motions, e.g. d10w, but * can cross line boundaries. For these commands, if the * cut crosses a line boundary, it goes into the numeric * buffers. This includes most of the commands. * 3: Some motions aren't line mode motions, e.g. d`, * but always go into the numeric buffers, regardless. This * was the commands: % ` / ? ( ) N n { } -- and nvi adds ^A. * * Otherwise, put it in the unnamed buffer. */ append = copy_one = copy_def = 0; if (namep != NULL) { name = *namep; if (LF_ISSET(CUT_NUMREQ) || LF_ISSET(CUT_NUMOPT) && (LF_ISSET(CUT_LINEMODE) || fm->lno != tm->lno)) { copy_one = 1; cb_rotate(sp); } if ((append = isupper(name)) == 1) { if (!copy_one) copy_def = 1; name = tolower(name); } namecb: CBNAME(sp, cbp, name); } else if (LF_ISSET(CUT_NUMREQ) || LF_ISSET(CUT_NUMOPT) && (LF_ISSET(CUT_LINEMODE) || fm->lno != tm->lno)) { name = '1'; cb_rotate(sp); goto namecb; } else cbp = &sp->gp->dcb_store; copyloop: /* * If this is a new buffer, create it and add it into the list. * Otherwise, if it's not an append, free its current contents. */ if (cbp == NULL) { CALLOC_RET(sp, cbp, CB *, 1, sizeof(CB)); cbp->name = name; CIRCLEQ_INIT(&cbp->textq); LIST_INSERT_HEAD(&sp->gp->cutq, cbp, q); } else if (!append) { text_lfree(&cbp->textq); cbp->len = 0; cbp->flags = 0; } #define ENTIRE_LINE 0 /* In line mode, it's pretty easy, just cut the lines. */ if (LF_ISSET(CUT_LINEMODE)) { cbp->flags |= CB_LMODE; for (lno = fm->lno; lno <= tm->lno; ++lno) if (cut_line(sp, lno, 0, 0, cbp)) goto cut_line_err; } else { /* * Get the first line. A length of 0 causes cut_line * to cut from the MARK to the end of the line. */ if (cut_line(sp, fm->lno, fm->cno, fm->lno != tm->lno ? ENTIRE_LINE : (tm->cno - fm->cno) + 1, cbp)) goto cut_line_err; /* Get the intermediate lines. */ for (lno = fm->lno; ++lno < tm->lno;) if (cut_line(sp, lno, 0, ENTIRE_LINE, cbp)) goto cut_line_err; /* Get the last line. */ if (tm->lno != fm->lno && cut_line(sp, lno, 0, tm->cno + 1, cbp)) goto cut_line_err; } append = 0; /* Only append to the named buffer. */ sp->gp->dcbp = cbp; /* Repoint the default buffer on each pass. */ if (copy_one) { /* Copy into numeric buffer 1. */ name = '1'; CBNAME(sp, cbp, name); copy_one = 0; goto copyloop; } if (copy_def) { /* Copy into the default buffer. */ cbp = &sp->gp->dcb_store; copy_def = 0; goto copyloop; } return (0); cut_line_err: text_lfree(&cbp->textq); cbp->len = 0; cbp->flags = 0; return (1); } /* * cb_rotate -- * Rotate the numbered buffers up one. */ static void cb_rotate(sp) SCR *sp; { CB *cbp, *del_cbp; del_cbp = NULL; for (cbp = sp->gp->cutq.lh_first; cbp != NULL; cbp = cbp->q.le_next) switch(cbp->name) { case '1': cbp->name = '2'; break; case '2': cbp->name = '3'; break; case '3': cbp->name = '4'; break; case '4': cbp->name = '5'; break; case '5': cbp->name = '6'; break; case '6': cbp->name = '7'; break; case '7': cbp->name = '8'; break; case '8': cbp->name = '9'; break; case '9': del_cbp = cbp; break; } if (del_cbp != NULL) { LIST_REMOVE(del_cbp, q); text_lfree(&del_cbp->textq); free(del_cbp); } } /* * cut_line -- * Cut a portion of a single line. * * PUBLIC: int cut_line __P((SCR *, recno_t, size_t, size_t, CB *)); */ int cut_line(sp, lno, fcno, clen, cbp) SCR *sp; recno_t lno; size_t fcno, clen; CB *cbp; { TEXT *tp; size_t len; char *p; /* Get the line. */ if (db_get(sp, lno, DBG_FATAL, &p, &len)) return (1); /* Create a TEXT structure that can hold the entire line. */ if ((tp = text_init(sp, NULL, 0, len)) == NULL) return (1); /* * If the line isn't empty and it's not the entire line, * copy the portion we want, and reset the TEXT length. */ if (len != 0) { if (clen == 0) clen = len - fcno; memcpy(tp->lb, p + fcno, clen); tp->len = clen; } /* Append to the end of the cut buffer. */ CIRCLEQ_INSERT_TAIL(&cbp->textq, tp, q); cbp->len += tp->len; return (0); } /* * cut_close -- * Discard all cut buffers. * * PUBLIC: void cut_close __P((GS *)); */ void cut_close(gp) GS *gp; { CB *cbp; /* Free cut buffer list. */ while ((cbp = gp->cutq.lh_first) != NULL) { if (cbp->textq.cqh_first != (void *)&cbp->textq) text_lfree(&cbp->textq); LIST_REMOVE(cbp, q); free(cbp); } /* Free default cut storage. */ cbp = &gp->dcb_store; if (cbp->textq.cqh_first != (void *)&cbp->textq) text_lfree(&cbp->textq); } /* * text_init -- * Allocate a new TEXT structure. * * PUBLIC: TEXT *text_init __P((SCR *, const char *, size_t, size_t)); */ TEXT * text_init(sp, p, len, total_len) SCR *sp; const char *p; size_t len, total_len; { TEXT *tp; CALLOC(sp, tp, TEXT *, 1, sizeof(TEXT)); if (tp == NULL) return (NULL); /* ANSI C doesn't define a call to malloc(3) for 0 bytes. */ if ((tp->lb_len = total_len) != 0) { MALLOC(sp, tp->lb, CHAR_T *, tp->lb_len); if (tp->lb == NULL) { free(tp); return (NULL); } if (p != NULL && len != 0) memcpy(tp->lb, p, len); } tp->len = len; return (tp); } /* * text_lfree -- * Free a chain of text structures. * * PUBLIC: void text_lfree __P((TEXTH *)); */ void text_lfree(headp) TEXTH *headp; { TEXT *tp; while ((tp = headp->cqh_first) != (void *)headp) { CIRCLEQ_REMOVE(headp, tp, q); text_free(tp); } } /* * text_free -- * Free a text structure. * * PUBLIC: void text_free __P((TEXT *)); */ void text_free(tp) TEXT *tp; { if (tp->lb != NULL) free(tp->lb); free(tp); } vigor-0.016.orig/common/cut.h0100644000076400007640000000474107103707215014532 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)cut.h 10.5 (Berkeley) 4/3/96 */ typedef struct _texth TEXTH; /* TEXT list head structure. */ CIRCLEQ_HEAD(_texth, _text); /* Cut buffers. */ struct _cb { LIST_ENTRY(_cb) q; /* Linked list of cut buffers. */ TEXTH textq; /* Linked list of TEXT structures. */ CHAR_T name; /* Cut buffer name. */ size_t len; /* Total length of cut text. */ #define CB_LMODE 0x01 /* Cut was in line mode. */ u_int8_t flags; }; /* Lines/blocks of text. */ struct _text { /* Text: a linked list of lines. */ CIRCLEQ_ENTRY(_text) q; /* Linked list of text structures. */ char *lb; /* Line buffer. */ size_t lb_len; /* Line buffer length. */ size_t len; /* Line length. */ /* These fields are used by the vi text input routine. */ recno_t lno; /* 1-N: file line. */ size_t cno; /* 0-N: file character in line. */ size_t ai; /* 0-N: autoindent bytes. */ size_t insert; /* 0-N: bytes to insert (push). */ size_t offset; /* 0-N: initial, unerasable chars. */ size_t owrite; /* 0-N: chars to overwrite. */ size_t R_erase; /* 0-N: 'R' erase count. */ size_t sv_cno; /* 0-N: Saved line cursor. */ size_t sv_len; /* 0-N: Saved line length. */ /* * These fields returns information from the vi text input routine. * * The termination condition. Note, this field is only valid if the * text input routine returns success. * TERM_BS: User backspaced over the prompt. * TERM_CEDIT: User entered . * TERM_CR: User entered ; no data. * TERM_ESC: User entered ; no data. * TERM_OK: Data available. * TERM_SEARCH: Incremental search. */ enum { TERM_BS, TERM_CEDIT, TERM_CR, TERM_ESC, TERM_OK, TERM_SEARCH } term; }; /* * Get named buffer 'name'. * Translate upper-case buffer names to lower-case buffer names. */ #define CBNAME(sp, cbp, nch) { \ CHAR_T L__name; \ L__name = isupper(nch) ? tolower(nch) : (nch); \ for (cbp = sp->gp->cutq.lh_first; \ cbp != NULL; cbp = cbp->q.le_next) \ if (cbp->name == L__name) \ break; \ } /* Flags to the cut() routine. */ #define CUT_LINEMODE 0x01 /* Cut in line mode. */ #define CUT_NUMOPT 0x02 /* Numeric buffer: optional. */ #define CUT_NUMREQ 0x04 /* Numeric buffer: required. */ vigor-0.016.orig/common/delete.c0100644000076400007640000000701207103707215015166 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)delete.c 10.12 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "common.h" /* * del -- * Delete a range of text. * * PUBLIC: int del __P((SCR *, MARK *, MARK *, int)); */ int del(sp, fm, tm, lmode) SCR *sp; MARK *fm, *tm; int lmode; { recno_t lno; size_t blen, len, nlen, tlen; char *bp, *p; int eof, rval; bp = NULL; /* Case 1 -- delete in line mode. */ if (lmode) { for (lno = tm->lno; lno >= fm->lno; --lno) { if (db_delete(sp, lno)) return (1); ++sp->rptlines[L_DELETED]; if (lno % INTERRUPT_CHECK == 0 && INTERRUPTED(sp)) break; } goto done; } /* * Case 2 -- delete to EOF. This is a special case because it's * easier to pick it off than try and find it in the other cases. */ if (db_last(sp, &lno)) return (1); if (tm->lno >= lno) { if (tm->lno == lno) { if (db_get(sp, lno, DBG_FATAL, &p, &len)) return (1); eof = tm->cno >= len ? 1 : 0; } else eof = 1; if (eof) { for (lno = tm->lno; lno > fm->lno; --lno) { if (db_delete(sp, lno)) return (1); ++sp->rptlines[L_DELETED]; if (lno % INTERRUPT_CHECK == 0 && INTERRUPTED(sp)) break; } if (db_get(sp, fm->lno, DBG_FATAL, &p, &len)) return (1); GET_SPACE_RET(sp, bp, blen, fm->cno); memcpy(bp, p, fm->cno); if (db_set(sp, fm->lno, bp, fm->cno)) return (1); goto done; } } /* Case 3 -- delete within a single line. */ if (tm->lno == fm->lno) { if (db_get(sp, fm->lno, DBG_FATAL, &p, &len)) return (1); GET_SPACE_RET(sp, bp, blen, len); if (fm->cno != 0) memcpy(bp, p, fm->cno); memcpy(bp + fm->cno, p + (tm->cno + 1), len - (tm->cno + 1)); if (db_set(sp, fm->lno, bp, len - ((tm->cno - fm->cno) + 1))) goto err; goto done; } /* * Case 4 -- delete over multiple lines. * * Copy the start partial line into place. */ if ((tlen = fm->cno) != 0) { if (db_get(sp, fm->lno, DBG_FATAL, &p, NULL)) return (1); GET_SPACE_RET(sp, bp, blen, tlen + 256); memcpy(bp, p, tlen); } /* Copy the end partial line into place. */ if (db_get(sp, tm->lno, DBG_FATAL, &p, &len)) goto err; if (len != 0 && tm->cno != len - 1) { /* * XXX * We can overflow memory here, if the total length is greater * than SIZE_T_MAX. The only portable way I've found to test * is depending on the overflow being less than the value. */ nlen = (len - (tm->cno + 1)) + tlen; if (tlen > nlen) { msgq(sp, M_ERR, "002|Line length overflow"); goto err; } if (tlen == 0) { GET_SPACE_RET(sp, bp, blen, nlen); } else ADD_SPACE_RET(sp, bp, blen, nlen); memcpy(bp + tlen, p + (tm->cno + 1), len - (tm->cno + 1)); tlen += len - (tm->cno + 1); } /* Set the current line. */ if (db_set(sp, fm->lno, bp, tlen)) goto err; /* Delete the last and intermediate lines. */ for (lno = tm->lno; lno > fm->lno; --lno) { if (db_delete(sp, lno)) goto err; ++sp->rptlines[L_DELETED]; if (lno % INTERRUPT_CHECK == 0 && INTERRUPTED(sp)) break; } done: rval = 0; if (0) err: rval = 1; if (bp != NULL) FREE_SPACE(sp, bp, blen); return (rval); } vigor-0.016.orig/common/exf.c0100644000076400007640000011744507103707215014522 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)exf.c 10.49 (Berkeley) 10/10/96"; #endif /* not lint */ #include #include /* XXX: param.h may not have included types.h */ #include #include /* * We include , because the flock(2) and open(2) #defines * were found there on historical systems. We also include * because the open(2) #defines are found there on newer systems. */ #include #include #include #include #include #include #include #include #include #include #include "common.h" static int file_backup __P((SCR *, char *, char *)); static void file_cinit __P((SCR *)); static void file_comment __P((SCR *)); static int file_spath __P((SCR *, FREF *, struct stat *, int *)); /* * file_add -- * Insert a file name into the FREF list, if it doesn't already * appear in it. * * !!! * The "if it doesn't already appear" changes vi's semantics slightly. If * you do a "vi foo bar", and then execute "next bar baz", the edit of bar * will reflect the line/column of the previous edit session. Historic nvi * did not do this. The change is a logical extension of the change where * vi now remembers the last location in any file that it has ever edited, * not just the previously edited file. * * PUBLIC: FREF *file_add __P((SCR *, CHAR_T *)); */ FREF * file_add(sp, name) SCR *sp; CHAR_T *name; { GS *gp; FREF *frp, *tfrp; /* * Return it if it already exists. Note that we test against the * user's name, whatever that happens to be, including if it's a * temporary file. * * If the user added a file but was unable to initialize it, there * can be file list entries where the name field is NULL. Discard * them the next time we see them. */ gp = sp->gp; if (name != NULL) for (frp = gp->frefq.cqh_first; frp != (FREF *)&gp->frefq; frp = frp->q.cqe_next) { if (frp->name == NULL) { tfrp = frp->q.cqe_next; CIRCLEQ_REMOVE(&gp->frefq, frp, q); if (frp->name != NULL) free(frp->name); free(frp); frp = tfrp; continue; } if (!strcmp(frp->name, name)) return (frp); } /* Allocate and initialize the FREF structure. */ CALLOC(sp, frp, FREF *, 1, sizeof(FREF)); if (frp == NULL) return (NULL); /* * If no file name specified, or if the file name is a request * for something temporary, file_init() will allocate the file * name. Temporary files are always ignored. */ if (name != NULL && strcmp(name, TEMPORARY_FILE_STRING) && (frp->name = strdup(name)) == NULL) { free(frp); msgq(sp, M_SYSERR, NULL); return (NULL); } /* Append into the chain of file names. */ CIRCLEQ_INSERT_TAIL(&gp->frefq, frp, q); return (frp); } /* * file_init -- * Start editing a file, based on the FREF structure. If successsful, * let go of any previous file. Don't release the previous file until * absolutely sure we have the new one. * * PUBLIC: int file_init __P((SCR *, FREF *, char *, int)); */ int file_init(sp, frp, rcv_name, flags) SCR *sp; FREF *frp; char *rcv_name; int flags; { EXF *ep; RECNOINFO oinfo; struct stat sb; size_t psize; int fd, exists, open_err, readonly; char *oname, tname[MAXPATHLEN]; open_err = readonly = 0; /* * If the file is a recovery file, let the recovery code handle it. * Clear the FR_RECOVER flag first -- the recovery code does set up, * and then calls us! If the recovery call fails, it's probably * because the named file doesn't exist. So, move boldly forward, * presuming that there's an error message the user will get to see. */ if (F_ISSET(frp, FR_RECOVER)) { F_CLR(frp, FR_RECOVER); return (rcv_read(sp, frp)); } /* * Required FRP initialization; the only flag we keep is the * cursor information. */ F_CLR(frp, ~FR_CURSORSET); /* * Required EXF initialization: * Flush the line caches. * Default recover mail file fd to -1. * Set initial EXF flag bits. */ CALLOC_RET(sp, ep, EXF *, 1, sizeof(EXF)); ep->c_lno = ep->c_nlines = OOBLNO; ep->rcv_fd = ep->fcntl_fd = -1; F_SET(ep, F_FIRSTMODIFY); /* * Scan the user's path to find the file that we're going to * try and open. */ if (file_spath(sp, frp, &sb, &exists)) return (1); /* * If no name or backing file, for whatever reason, create a backing * temporary file, saving the temp file name so we can later unlink * it. If the user never named this file, copy the temporary file name * to the real name (we display that until the user renames it). */ oname = frp->name; if (LF_ISSET(FS_OPENERR) || oname == NULL || !exists) { if (opts_empty(sp, O_DIRECTORY, 0)) goto err; (void)snprintf(tname, sizeof(tname), "%s/vi.XXXXXX", O_STR(sp, O_DIRECTORY)); if ((fd = mkstemp(tname)) == -1) { msgq(sp, M_SYSERR, "237|Unable to create temporary file"); goto err; } (void)close(fd); if (frp->name == NULL) F_SET(frp, FR_TMPFILE); if ((frp->tname = strdup(tname)) == NULL || frp->name == NULL && (frp->name = strdup(tname)) == NULL) { if (frp->tname != NULL) free(frp->tname); msgq(sp, M_SYSERR, NULL); (void)unlink(tname); goto err; } oname = frp->tname; psize = 1024; if (!LF_ISSET(FS_OPENERR)) F_SET(frp, FR_NEWFILE); time(&ep->mtime); } else { /* * XXX * A seat of the pants calculation: try to keep the file in * 15 pages or less. Don't use a page size larger than 10K * (vi should have good locality) or smaller than 1K. */ psize = ((sb.st_size / 15) + 1023) / 1024; if (psize > 10) psize = 10; if (psize == 0) psize = 1; psize *= 1024; F_SET(ep, F_DEVSET); ep->mdev = sb.st_dev; ep->minode = sb.st_ino; ep->mtime = sb.st_mtime; if (!S_ISREG(sb.st_mode)) msgq_str(sp, M_ERR, oname, "238|Warning: %s is not a regular file"); } /* Set up recovery. */ memset(&oinfo, 0, sizeof(RECNOINFO)); oinfo.bval = '\n'; /* Always set. */ oinfo.psize = psize; oinfo.flags = F_ISSET(sp->gp, G_SNAPSHOT) ? R_SNAPSHOT : 0; if (rcv_name == NULL) { if (!rcv_tmp(sp, ep, frp->name)) oinfo.bfname = ep->rcv_path; } else { if ((ep->rcv_path = strdup(rcv_name)) == NULL) { msgq(sp, M_SYSERR, NULL); goto err; } oinfo.bfname = ep->rcv_path; F_SET(ep, F_MODIFIED); } /* Open a db structure. */ if ((ep->db = dbopen(rcv_name == NULL ? oname : NULL, O_NONBLOCK | O_RDONLY, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH, DB_RECNO, &oinfo)) == NULL) { msgq_str(sp, M_SYSERR, rcv_name == NULL ? oname : rcv_name, "%s"); /* * !!! * Historically, vi permitted users to edit files that couldn't * be read. This isn't useful for single files from a command * line, but it's quite useful for "vi *.c", since you can skip * past files that you can't read. */ open_err = 1; goto oerr; } /* * Do the remaining things that can cause failure of the new file, * mark and logging initialization. */ if (mark_init(sp, ep) || log_init(sp, ep)) goto err; /* * Set the alternate file name to be the file we're discarding. * * !!! * Temporary files can't become alternate files, so there's no file * name. This matches historical practice, although it could only * happen in historical vi as the result of the initial command, i.e. * if vi was executed without a file name. */ if (LF_ISSET(FS_SETALT)) set_alt_name(sp, sp->frp == NULL || F_ISSET(sp->frp, FR_TMPFILE) ? NULL : sp->frp->name); /* * Close the previous file; if that fails, close the new one and run * for the border. * * !!! * There's a nasty special case. If the user edits a temporary file, * and then does an ":e! %", we need to re-initialize the backing * file, but we can't change the name. (It's worse -- we're dealing * with *names* here, we can't even detect that it happened.) Set a * flag so that the file_end routine ignores the backing information * of the old file if it happens to be the same as the new one. * * !!! * Side-effect: after the call to file_end(), sp->frp may be NULL. */ if (sp->ep != NULL) { F_SET(frp, FR_DONTDELETE); if (file_end(sp, NULL, LF_ISSET(FS_FORCE))) { (void)file_end(sp, ep, 1); goto err; } F_CLR(frp, FR_DONTDELETE); } /* * Lock the file; if it's a recovery file, it should already be * locked. Note, we acquire the lock after the previous file * has been ended, so that we don't get an "already locked" error * for ":edit!". * * XXX * While the user can't interrupt us between the open and here, * there's a race between the dbopen() and the lock. Not much * we can do about it. * * XXX * We don't make a big deal of not being able to lock the file. As * locking rarely works over NFS, and often fails if the file was * mmap(2)'d, it's far too common to do anything like print an error * message, let alone make the file readonly. At some future time, * when locking is a little more reliable, this should change to be * an error. */ if (rcv_name == NULL) switch (file_lock(sp, oname, &ep->fcntl_fd, ep->db->fd(ep->db), 0)) { case LOCK_FAILED: F_SET(frp, FR_UNLOCKED); break; case LOCK_UNAVAIL: readonly = 1; msgq_str(sp, M_INFO, oname, "239|%s already locked, session is read-only"); break; case LOCK_SUCCESS: break; } /* * Historically, the readonly edit option was set per edit buffer in * vi, unless the -R command-line option was specified or the program * was executed as "view". (Well, to be truthful, if the letter 'w' * occurred anywhere in the program name, but let's not get into that.) * So, the persistant readonly state has to be stored in the screen * structure, and the edit option value toggles with the contents of * the edit buffer. If the persistant readonly flag is set, set the * readonly edit option. * * Otherwise, try and figure out if a file is readonly. This is a * dangerous thing to do. The kernel is the only arbiter of whether * or not a file is writeable, and the best that a user program can * do is guess. Obvious loopholes are files that are on a file system * mounted readonly (access catches this one on a few systems), or * alternate protection mechanisms, ACL's for example, that we can't * portably check. Lots of fun, and only here because users whined. * * !!! * Historic vi displayed the readonly message if none of the file * write bits were set, or if an an access(2) call on the path * failed. This seems reasonable. If the file is mode 444, root * users may want to know that the owner of the file did not expect * it to be written. * * Historic vi set the readonly bit if no write bits were set for * a file, even if the access call would have succeeded. This makes * the superuser force the write even when vi expects that it will * succeed. I'm less supportive of this semantic, but it's historic * practice and the conservative approach to vi'ing files as root. * * It would be nice if there was some way to update this when the user * does a "^Z; chmod ...". The problem is that we'd first have to * distinguish between readonly bits set because of file permissions * and those set for other reasons. That's not too hard, but deciding * when to reevaluate the permissions is trickier. An alternative * might be to turn off the readonly bit if the user forces a write * and it succeeds. * * XXX * Access(2) doesn't consider the effective uid/gid values. This * probably isn't a problem for vi when it's running standalone. */ if (readonly || F_ISSET(sp, SC_READONLY) || !F_ISSET(frp, FR_NEWFILE) && (!(sb.st_mode & (S_IWUSR | S_IWGRP | S_IWOTH)) || access(frp->name, W_OK))) O_SET(sp, O_READONLY); else O_CLR(sp, O_READONLY); /* Switch... */ ++ep->refcnt; sp->ep = ep; sp->frp = frp; /* Set the initial cursor position, queue initial command. */ file_cinit(sp); /* Redraw the screen from scratch, schedule a welcome message. */ F_SET(sp, SC_SCR_REFORMAT | SC_STATUS); return (0); err: if (frp->name != NULL) { free(frp->name); frp->name = NULL; } if (frp->tname != NULL) { (void)unlink(frp->tname); free(frp->tname); frp->tname = NULL; } oerr: if (F_ISSET(ep, F_RCV_ON)) (void)unlink(ep->rcv_path); if (ep->rcv_path != NULL) { free(ep->rcv_path); ep->rcv_path = NULL; } if (ep->db != NULL) (void)ep->db->close(ep->db); free(ep); return (open_err ? file_init(sp, frp, rcv_name, flags | FS_OPENERR) : 1); } /* * file_spath -- * Scan the user's path to find the file that we're going to * try and open. */ static int file_spath(sp, frp, sbp, existsp) SCR *sp; FREF *frp; struct stat *sbp; int *existsp; { CHAR_T savech; size_t len; int found; char *name, *p, *t, path[MAXPATHLEN]; /* * If the name is NULL or an explicit reference (i.e., the first * component is . or ..) ignore the O_PATH option. */ name = frp->name; if (name == NULL) { *existsp = 0; return (0); } if (name[0] == '/' || name[0] == '.' && (name[1] == '/' || name[1] == '.' && name[2] == '/')) { *existsp = !stat(name, sbp); return (0); } /* Try . */ if (!stat(name, sbp)) { *existsp = 1; return (0); } /* Try the O_PATH option values. */ for (found = 0, p = t = O_STR(sp, O_PATH);; ++p) if (*p == ':' || *p == '\0') { if (t < p - 1) { savech = *p; *p = '\0'; len = snprintf(path, sizeof(path), "%s/%s", t, name); *p = savech; if (!stat(path, sbp)) { found = 1; break; } } t = p + 1; if (*p == '\0') break; } /* If we found it, build a new pathname and discard the old one. */ if (found) { MALLOC_RET(sp, p, char *, len + 1); memcpy(p, path, len + 1); free(frp->name); frp->name = p; } *existsp = found; return (0); } /* * file_cinit -- * Set up the initial cursor position. */ static void file_cinit(sp) SCR *sp; { GS *gp; MARK m; size_t len; int nb; /* Set some basic defaults. */ sp->lno = 1; sp->cno = 0; /* * Historically, initial commands (the -c option) weren't executed * until a file was loaded, e.g. "vi +10 nofile", followed by an * :edit or :tag command, would execute the +10 on the file loaded * by the subsequent command, (assuming that it existed). This * applied as well to files loaded using the tag commands, and we * follow that historic practice. Also, all initial commands were * ex commands and were always executed on the last line of the file. * * Otherwise, if no initial command for this file: * If in ex mode, move to the last line, first nonblank character. * If the file has previously been edited, move to the last known * position, and check it for validity. * Otherwise, move to the first line, first nonblank. * * This gets called by the file init code, because we may be in a * file of ex commands and we want to execute them from the right * location in the file. */ nb = 0; gp = sp->gp; if (gp->c_option != NULL && !F_ISSET(sp->frp, FR_NEWFILE)) { if (db_last(sp, &sp->lno)) return; if (sp->lno == 0) { sp->lno = 1; sp->cno = 0; } if (ex_run_str(sp, "-c option", gp->c_option, strlen(gp->c_option), 1, 1)) return; gp->c_option = NULL; } else if (F_ISSET(sp, SC_EX)) { if (db_last(sp, &sp->lno)) return; if (sp->lno == 0) { sp->lno = 1; sp->cno = 0; return; } nb = 1; } else { if (F_ISSET(sp->frp, FR_CURSORSET)) { sp->lno = sp->frp->lno; sp->cno = sp->frp->cno; /* If returning to a file in vi, center the line. */ F_SET(sp, SC_SCR_CENTER); } else { if (O_ISSET(sp, O_COMMENT)) file_comment(sp); else sp->lno = 1; nb = 1; } if (db_get(sp, sp->lno, 0, NULL, &len)) { sp->lno = 1; sp->cno = 0; return; } if (!nb && sp->cno > len) nb = 1; } if (nb) { sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); } /* * !!! * The initial column is also the most attractive column. */ sp->rcm = sp->cno; /* * !!! * Historically, vi initialized the absolute mark, but ex did not. * Which meant, that if the first command in ex mode was "visual", * or if an ex command was executed first (e.g. vi +10 file) vi was * entered without the mark being initialized. For consistency, if * the file isn't empty, we initialize it for everyone, believing * that it can't hurt, and is generally useful. Not initializing it * if the file is empty is historic practice, although it has always * been possible to set (and use) marks in empty vi files. */ m.lno = sp->lno; m.cno = sp->cno; (void)mark_set(sp, ABSMARK1, &m, 0); } /* * file_end -- * Stop editing a file. * * PUBLIC: int file_end __P((SCR *, EXF *, int)); */ int file_end(sp, ep, force) SCR *sp; EXF *ep; int force; { FREF *frp; /* * !!! * ep MAY NOT BE THE SAME AS sp->ep, DON'T USE THE LATTER. * (If argument ep is NULL, use sp->ep.) * * If multiply referenced, just decrement the count and return. */ if (ep == NULL) ep = sp->ep; if (--ep->refcnt != 0) return (0); /* * * Clean up the FREF structure. * * Save the cursor location. * * XXX * It would be cleaner to do this somewhere else, but by the time * ex or vi knows that we're changing files it's already happened. */ frp = sp->frp; frp->lno = sp->lno; frp->cno = sp->cno; F_SET(frp, FR_CURSORSET); /* * We may no longer need the temporary backing file, so clean it * up. We don't need the FREF structure either, if the file was * never named, so lose it. * * !!! * Re: FR_DONTDELETE, see the comment above in file_init(). */ if (!F_ISSET(frp, FR_DONTDELETE) && frp->tname != NULL) { if (unlink(frp->tname)) msgq_str(sp, M_SYSERR, frp->tname, "240|%s: remove"); free(frp->tname); frp->tname = NULL; if (F_ISSET(frp, FR_TMPFILE)) { CIRCLEQ_REMOVE(&sp->gp->frefq, frp, q); if (frp->name != NULL) free(frp->name); free(frp); } sp->frp = NULL; } /* * Clean up the EXF structure. * * Close the db structure. */ if (ep->db->close != NULL && ep->db->close(ep->db) && !force) { msgq_str(sp, M_SYSERR, frp->name, "241|%s: close"); ++ep->refcnt; return (1); } /* COMMITTED TO THE CLOSE. THERE'S NO GOING BACK... */ /* Stop logging. */ (void)log_end(sp, ep); /* Free up any marks. */ (void)mark_end(sp, ep); /* * Delete recovery files, close the open descriptor, free recovery * memory. See recover.c for a description of the protocol. * * XXX * Unlink backup file first, we can detect that the recovery file * doesn't reference anything when the user tries to recover it. * There's a race, here, obviously, but it's fairly small. */ if (!F_ISSET(ep, F_RCV_NORM)) { if (ep->rcv_path != NULL && unlink(ep->rcv_path)) msgq_str(sp, M_SYSERR, ep->rcv_path, "242|%s: remove"); if (ep->rcv_mpath != NULL && unlink(ep->rcv_mpath)) msgq_str(sp, M_SYSERR, ep->rcv_mpath, "243|%s: remove"); } if (ep->fcntl_fd != -1) (void)close(ep->fcntl_fd); if (ep->rcv_fd != -1) (void)close(ep->rcv_fd); if (ep->rcv_path != NULL) free(ep->rcv_path); if (ep->rcv_mpath != NULL) free(ep->rcv_mpath); free(ep); return (0); } /* * file_write -- * Write the file to disk. Historic vi had fairly convoluted * semantics for whether or not writes would happen. That's * why all the flags. * * PUBLIC: int file_write __P((SCR *, MARK *, MARK *, char *, int)); */ int file_write(sp, fm, tm, name, flags) SCR *sp; MARK *fm, *tm; char *name; int flags; { enum { NEWFILE, OLDFILE } mtype; struct stat sb; EXF *ep; FILE *fp; FREF *frp; MARK from, to; size_t len; u_long nlno, nch; int fd, nf, noname, oflags, rval; char *p, *s, *t, buf[MAXPATHLEN + 64]; const char *msgstr; ep = sp->ep; frp = sp->frp; /* * Writing '%', or naming the current file explicitly, has the * same semantics as writing without a name. */ if (name == NULL || !strcmp(name, frp->name)) { noname = 1; name = frp->name; } else noname = 0; /* Can't write files marked read-only, unless forced. */ if (!LF_ISSET(FS_FORCE) && noname && O_ISSET(sp, O_READONLY)) { msgq(sp, M_ERR, LF_ISSET(FS_POSSIBLE) ? "244|Read-only file, not written; use ! to override" : "245|Read-only file, not written"); return (1); } /* If not forced, not appending, and "writeany" not set ... */ if (!LF_ISSET(FS_FORCE | FS_APPEND) && !O_ISSET(sp, O_WRITEANY)) { /* Don't overwrite anything but the original file. */ if ((!noname || F_ISSET(frp, FR_NAMECHANGE)) && !stat(name, &sb)) { msgq_str(sp, M_ERR, name, LF_ISSET(FS_POSSIBLE) ? "246|%s exists, not written; use ! to override" : "247|%s exists, not written"); return (1); } /* * Don't write part of any existing file. Only test for the * original file, the previous test catches anything else. */ if (!LF_ISSET(FS_ALL) && noname && !stat(name, &sb)) { msgq(sp, M_ERR, LF_ISSET(FS_POSSIBLE) ? "248|Partial file, not written; use ! to override" : "249|Partial file, not written"); return (1); } } /* * Figure out if the file already exists -- if it doesn't, we display * the "new file" message. The stat might not be necessary, but we * just repeat it because it's easier than hacking the previous tests. * The information is only used for the user message and modification * time test, so we can ignore the obvious race condition. * * One final test. If we're not forcing or appending the current file, * and we have a saved modification time, object if the file changed * since we last edited or wrote it, and make them force it. */ if (stat(name, &sb)) mtype = NEWFILE; else { if (noname && !LF_ISSET(FS_FORCE | FS_APPEND) && (F_ISSET(ep, F_DEVSET) && (sb.st_dev != ep->mdev || sb.st_ino != ep->minode) || sb.st_mtime != ep->mtime)) { msgq_str(sp, M_ERR, name, LF_ISSET(FS_POSSIBLE) ? "250|%s: file modified more recently than this copy; use ! to override" : "251|%s: file modified more recently than this copy"); return (1); } mtype = OLDFILE; } /* Set flags to create, write, and either append or truncate. */ oflags = O_CREAT | O_WRONLY | (LF_ISSET(FS_APPEND) ? O_APPEND : O_TRUNC); /* Backup the file if requested. */ if (!opts_empty(sp, O_BACKUP, 1) && file_backup(sp, name, O_STR(sp, O_BACKUP)) && !LF_ISSET(FS_FORCE)) return (1); /* Open the file. */ SIGBLOCK; if ((fd = open(name, oflags, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH)) < 0) { msgq_str(sp, M_SYSERR, name, "%s"); SIGUNBLOCK; return (1); } SIGUNBLOCK; /* Try and get a lock. */ if (!noname && file_lock(sp, NULL, NULL, fd, 0) == LOCK_UNAVAIL) msgq_str(sp, M_ERR, name, "252|%s: write lock was unavailable"); #if __linux__ /* * XXX * In libc 4.5.x, fdopen(fd, "w") clears the O_APPEND flag (if set). * This bug is fixed in libc 4.6.x. * * This code works around this problem for libc 4.5.x users. * Note that this code is harmless if you're using libc 4.6.x. */ if (LF_ISSET(FS_APPEND) && lseek(fd, (off_t)0, SEEK_END) < 0) { msgq(sp, M_SYSERR, name); return (1); } #endif /* * Use stdio for buffering. * * XXX * SVR4.2 requires the fdopen mode exactly match the original open * mode, i.e. you have to open with "a" if appending. */ if ((fp = fdopen(fd, LF_ISSET(FS_APPEND) ? "a" : "w")) == NULL) { msgq_str(sp, M_SYSERR, name, "%s"); (void)close(fd); return (1); } /* Build fake addresses, if necessary. */ if (fm == NULL) { from.lno = 1; from.cno = 0; fm = &from; if (db_last(sp, &to.lno)) return (1); to.cno = 0; tm = &to; } rval = ex_writefp(sp, name, fp, fm, tm, &nlno, &nch, 0); /* * Save the new last modification time -- even if the write fails * we re-init the time. That way the user can clean up the disk * and rewrite without having to force it. */ if (noname) if (stat(name, &sb)) time(&ep->mtime); else { F_SET(ep, F_DEVSET); ep->mdev = sb.st_dev; ep->minode = sb.st_ino; ep->mtime = sb.st_mtime; } /* * If the write failed, complain loudly. ex_writefp() has already * complained about the actual error, reinforce it if data was lost. */ if (rval) { if (!LF_ISSET(FS_APPEND)) msgq_str(sp, M_ERR, name, "254|%s: WARNING: FILE TRUNCATED"); return (1); } /* * Once we've actually written the file, it doesn't matter that the * file name was changed -- if it was, we've already whacked it. */ F_CLR(frp, FR_NAMECHANGE); /* * If wrote the entire file, and it wasn't by appending it to a file, * clear the modified bit. If the file was written to the original * file name and the file is a temporary, set the "no exit" bit. This * permits the user to write the file and use it in the context of the * filesystem, but still keeps them from discarding their changes by * exiting. */ if (LF_ISSET(FS_ALL) && !LF_ISSET(FS_APPEND)) { F_CLR(ep, F_MODIFIED); if (F_ISSET(frp, FR_TMPFILE)) if (noname) F_SET(frp, FR_TMPEXIT); else F_CLR(frp, FR_TMPEXIT); } p = msg_print(sp, name, &nf); switch (mtype) { case NEWFILE: msgstr = msg_cat(sp, "256|%s: new file: %lu lines, %lu characters", NULL); len = snprintf(buf, sizeof(buf), msgstr, p, nlno, nch); break; case OLDFILE: msgstr = msg_cat(sp, LF_ISSET(FS_APPEND) ? "315|%s: appended: %lu lines, %lu characters" : "257|%s: %lu lines, %lu characters", NULL); len = snprintf(buf, sizeof(buf), msgstr, p, nlno, nch); break; default: abort(); } /* * There's a nasty problem with long path names. Cscope and tags files * can result in long paths and vi will request a continuation key from * the user. Unfortunately, the user has typed ahead, and chaos will * result. If we assume that the characters in the filenames only take * a single screen column each, we can trim the filename. */ s = buf; if (len >= sp->cols) { for (s = buf, t = buf + strlen(p); s < t && (*s != '/' || len >= sp->cols - 3); ++s, --len); if (s == t) s = buf; else { *--s = '.'; /* Leading ellipses. */ *--s = '.'; *--s = '.'; } } msgq(sp, M_INFO, s); if (nf) FREE_SPACE(sp, p, 0); return (0); } /* * file_backup -- * Backup the about-to-be-written file. * * XXX * We do the backup by copying the entire file. It would be nice to do * a rename instead, but: (1) both files may not fit and we want to fail * before doing the rename; (2) the backup file may not be on the same * disk partition as the file being written; (3) there may be optional * file information (MACs, DACs, whatever) that we won't get right if we * recreate the file. So, let's not risk it. */ static int file_backup(sp, name, bname) SCR *sp; char *name, *bname; { struct dirent *dp; struct stat sb; DIR *dirp; EXCMD cmd; off_t off; size_t blen; int flags, maxnum, nr, num, nw, rfd, wfd, version; char *bp, *estr, *p, *pct, *slash, *t, *wfname, buf[8192]; rfd = wfd = -1; bp = estr = wfname = NULL; /* * Open the current file for reading. Do this first, so that * we don't exec a shell before the most likely failure point. * If it doesn't exist, it's okay, there's just nothing to back * up. */ errno = 0; if ((rfd = open(name, O_RDONLY, 0)) < 0) { if (errno == ENOENT) return (0); estr = name; goto err; } /* * If the name starts with an 'N' character, add a version number * to the name. Strip the leading N from the string passed to the * expansion routines, for no particular reason. It would be nice * to permit users to put the version number anywhere in the backup * name, but there isn't a special character that we can use in the * name, and giving a new character a special meaning leads to ugly * hacks both here and in the supporting ex routines. * * Shell and file name expand the option's value. */ argv_init(sp, &cmd); ex_cinit(&cmd, 0, 0, 0, 0, 0, NULL); if (bname[0] == 'N') { version = 1; ++bname; } else version = 0; if (argv_exp2(sp, &cmd, bname, strlen(bname))) return (1); /* * 0 args: impossible. * 1 args: use it. * >1 args: object, too many args. */ if (cmd.argc != 1) { msgq_str(sp, M_ERR, bname, "258|%s expanded into too many file names"); (void)close(rfd); return (1); } /* * If appending a version number, read through the directory, looking * for file names that match the name followed by a number. Make all * of the other % characters in name literal, so the user doesn't get * surprised and sscanf doesn't drop core indirecting through pointers * that don't exist. If any such files are found, increment its number * by one. */ if (version) { GET_SPACE_GOTO(sp, bp, blen, cmd.argv[0]->len * 2 + 50); for (t = bp, slash = NULL, p = cmd.argv[0]->bp; p[0] != '\0'; *t++ = *p++) if (p[0] == '%') { if (p[1] != '%') *t++ = '%'; } else if (p[0] == '/') slash = t; pct = t; *t++ = '%'; *t++ = 'd'; *t = '\0'; if (slash == NULL) { dirp = opendir("."); p = bp; } else { *slash = '\0'; dirp = opendir(bp); *slash = '/'; p = slash + 1; } if (dirp == NULL) { estr = cmd.argv[0]->bp; goto err; } for (maxnum = 0; (dp = readdir(dirp)) != NULL;) if (sscanf(dp->d_name, p, &num) == 1 && num > maxnum) maxnum = num; (void)closedir(dirp); /* Format the backup file name. */ (void)snprintf(pct, blen - (pct - bp), "%d", maxnum + 1); wfname = bp; } else { bp = NULL; wfname = cmd.argv[0]->bp; } /* Open the backup file, avoiding lurkers. */ if (stat(wfname, &sb) == 0) { if (!S_ISREG(sb.st_mode)) { msgq_str(sp, M_ERR, bname, "259|%s: not a regular file"); goto err; } if (sb.st_uid != getuid()) { msgq_str(sp, M_ERR, bname, "260|%s: not owned by you"); goto err; } if (sb.st_mode & (S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH)) { msgq_str(sp, M_ERR, bname, "261|%s: accessible by a user other than the owner"); goto err; } flags = O_TRUNC; } else flags = O_CREAT | O_EXCL; if ((wfd = open(wfname, flags | O_WRONLY, S_IRUSR | S_IWUSR)) < 0) { estr = bname; goto err; } /* Copy the file's current contents to its backup value. */ while ((nr = read(rfd, buf, sizeof(buf))) > 0) for (off = 0; nr != 0; nr -= nw, off += nw) if ((nw = write(wfd, buf + off, nr)) < 0) { estr = wfname; goto err; } if (nr < 0) { estr = name; goto err; } if (close(rfd)) { estr = name; goto err; } if (close(wfd)) { estr = wfname; goto err; } if (bp != NULL) FREE_SPACE(sp, bp, blen); return (0); alloc_err: err: if (rfd != -1) (void)close(rfd); if (wfd != -1) { (void)unlink(wfname); (void)close(wfd); } if (estr) msgq_str(sp, M_SYSERR, estr, "%s"); if (bp != NULL) FREE_SPACE(sp, bp, blen); return (1); } /* * file_comment -- * Skip the first comment. */ static void file_comment(sp) SCR *sp; { recno_t lno; size_t len; char *p; for (lno = 1; !db_get(sp, lno, 0, &p, &len) && len == 0; ++lno); if (p == NULL) return; if (p[0] == '#') { F_SET(sp, SC_SCR_TOP); while (!db_get(sp, ++lno, 0, &p, &len)) if (len < 1 || p[0] != '#') { sp->lno = lno; return; } } else if (len > 1 && p[0] == '/' && p[1] == '*') { F_SET(sp, SC_SCR_TOP); do { for (; len > 1; --len, ++p) if (p[0] == '*' && p[1] == '/') { sp->lno = lno; return; } } while (!db_get(sp, ++lno, 0, &p, &len)); } else if (len > 1 && p[0] == '/' && p[1] == '/') { F_SET(sp, SC_SCR_TOP); p += 2; len -= 2; do { for (; len > 1; --len, ++p) if (p[0] == '/' && p[1] == '/') { sp->lno = lno; return; } } while (!db_get(sp, ++lno, 0, &p, &len)); } } /* * file_m1 -- * First modification check routine. The :next, :prev, :rewind, :tag, * :tagpush, :tagpop, ^^ modifications check. * * PUBLIC: int file_m1 __P((SCR *, int, int)); */ int file_m1(sp, force, flags) SCR *sp; int force, flags; { EXF *ep; ep = sp->ep; /* If no file loaded, return no modifications. */ if (ep == NULL) return (0); /* * If the file has been modified, we'll want to write it back or * fail. If autowrite is set, we'll write it back automatically, * unless force is also set. Otherwise, we fail unless forced or * there's another open screen on this file. */ if (F_ISSET(ep, F_MODIFIED)) if (O_ISSET(sp, O_AUTOWRITE)) { if (!force && file_aw(sp, flags)) return (1); } else if (ep->refcnt <= 1 && !force) { msgq(sp, M_ERR, LF_ISSET(FS_POSSIBLE) ? "262|File modified since last complete write; write or use ! to override" : "263|File modified since last complete write; write or use :edit! to override"); return (1); } return (file_m3(sp, force)); } /* * file_m2 -- * Second modification check routine. The :edit, :quit, :recover * modifications check. * * PUBLIC: int file_m2 __P((SCR *, int)); */ int file_m2(sp, force) SCR *sp; int force; { EXF *ep; ep = sp->ep; /* If no file loaded, return no modifications. */ if (ep == NULL) return (0); /* * If the file has been modified, we'll want to fail, unless forced * or there's another open screen on this file. */ if (F_ISSET(ep, F_MODIFIED) && ep->refcnt <= 1 && !force) { msgq(sp, M_ERR, "264|File modified since last complete write; write or use ! to override"); return (1); } return (file_m3(sp, force)); } /* * file_m3 -- * Third modification check routine. * * PUBLIC: int file_m3 __P((SCR *, int)); */ int file_m3(sp, force) SCR *sp; int force; { EXF *ep; ep = sp->ep; /* If no file loaded, return no modifications. */ if (ep == NULL) return (0); /* * Don't exit while in a temporary files if the file was ever modified. * The problem is that if the user does a ":wq", we write and quit, * unlinking the temporary file. Not what the user had in mind at all. * We permit writing to temporary files, so that user maps using file * system names work with temporary files. */ if (F_ISSET(sp->frp, FR_TMPEXIT) && ep->refcnt <= 1 && !force) { msgq(sp, M_ERR, "265|File is a temporary; exit will discard modifications"); return (1); } return (0); } /* * file_aw -- * Autowrite routine. If modified, autowrite is set and the readonly bit * is not set, write the file. A routine so there's a place to put the * comment. * * PUBLIC: int file_aw __P((SCR *, int)); */ int file_aw(sp, flags) SCR *sp; int flags; { if (!F_ISSET(sp->ep, F_MODIFIED)) return (0); if (!O_ISSET(sp, O_AUTOWRITE)) return (0); /* * !!! * Historic 4BSD vi attempted to write the file if autowrite was set, * regardless of the writeability of the file (as defined by the file * readonly flag). System V changed this as some point, not attempting * autowrite if the file was readonly. This feels like a bug fix to * me (e.g. the principle of least surprise is violated if readonly is * set and vi writes the file), so I'm compatible with System V. */ if (O_ISSET(sp, O_READONLY)) { msgq(sp, M_INFO, "266|File readonly, modifications not auto-written"); return (1); } return (file_write(sp, NULL, NULL, NULL, flags)); } /* * set_alt_name -- * Set the alternate pathname. * * Set the alternate pathname. It's a routine because I wanted some place * to hang this comment. The alternate pathname (normally referenced using * the special character '#' during file expansion and in the vi ^^ command) * is set by almost all ex commands that take file names as arguments. The * rules go something like this: * * 1: If any ex command takes a file name as an argument (except for the * :next command), the alternate pathname is set to that file name. * This excludes the command ":e" and ":w !command" as no file name * was specified. Note, historically, the :source command did not set * the alternate pathname. It does in nvi, for consistency. * * 2: However, if any ex command sets the current pathname, e.g. the * ":e file" or ":rew" commands succeed, then the alternate pathname * is set to the previous file's current pathname, if it had one. * This includes the ":file" command and excludes the ":e" command. * So, by rule #1 and rule #2, if ":edit foo" fails, the alternate * pathname will be "foo", if it succeeds, the alternate pathname will * be the previous current pathname. The ":e" command will not set * the alternate or current pathnames regardless. * * 3: However, if it's a read or write command with a file argument and * the current pathname has not yet been set, the file name becomes * the current pathname, and the alternate pathname is unchanged. * * If the user edits a temporary file, there may be times when there is no * alternative file name. A name argument of NULL turns it off. * * PUBLIC: void set_alt_name __P((SCR *, char *)); */ void set_alt_name(sp, name) SCR *sp; char *name; { if (sp->alt_name != NULL) free(sp->alt_name); if (name == NULL) sp->alt_name = NULL; else if ((sp->alt_name = strdup(name)) == NULL) msgq(sp, M_SYSERR, NULL); } /* * file_lock -- * Get an exclusive lock on a file. * * XXX * The default locking is flock(2) style, not fcntl(2). The latter is * known to fail badly on some systems, and its only advantage is that * it occasionally works over NFS. * * Furthermore, the semantics of fcntl(2) are wrong. The problems are * two-fold: you can't close any file descriptor associated with the file * without losing all of the locks, and you can't get an exclusive lock * unless you have the file open for writing. Someone ought to be shot, * but it's probably too late, they may already have reproduced. To get * around these problems, nvi opens the files for writing when it can and * acquires a second file descriptor when it can't. The recovery files * are examples of the former, they're always opened for writing. The DB * files can't be opened for writing because the semantics of DB are that * files opened for writing are flushed back to disk when the DB session * is ended. So, in that case we have to acquire an extra file descriptor. * * PUBLIC: lockr_t file_lock __P((SCR *, char *, int *, int, int)); */ lockr_t file_lock(sp, name, fdp, fd, iswrite) SCR *sp; char *name; int *fdp, fd, iswrite; { if (!O_ISSET(sp, O_LOCKFILES)) return (LOCK_SUCCESS); #ifdef HAVE_LOCK_FLOCK /* Hurrah! We've got flock(2). */ /* * !!! * We need to distinguish a lock not being available for the file * from the file system not supporting locking. Flock is documented * as returning EWOULDBLOCK; add EAGAIN for good measure, and assume * they are the former. There's no portable way to do this. */ errno = 0; return (flock(fd, LOCK_EX | LOCK_NB) ? errno == EAGAIN #ifdef EWOULDBLOCK || errno == EWOULDBLOCK #endif ? LOCK_UNAVAIL : LOCK_FAILED : LOCK_SUCCESS); #endif #ifdef HAVE_LOCK_FCNTL /* Gag me. We've got fcntl(2). */ { struct flock arg; int didopen, sverrno; arg.l_type = F_WRLCK; arg.l_whence = 0; /* SEEK_SET */ arg.l_start = arg.l_len = 0; arg.l_pid = 0; /* * If the file descriptor isn't opened for writing, it must fail. * If we fail because we can't get a read/write file descriptor, * we return LOCK_SUCCESS, believing that the file is readonly * and that will be sufficient to warn the user. */ if (!iswrite) { if (name == NULL || fdp == NULL) return (LOCK_FAILED); if ((fd = open(name, O_RDWR, 0)) == -1) return (LOCK_SUCCESS); *fdp = fd; didopen = 1; } errno = 0; if (!fcntl(fd, F_SETLK, &arg)) return (LOCK_SUCCESS); if (didopen) { sverrno = errno; (void)close(fd); errno = sverrno; } /* * !!! * We need to distinguish a lock not being available for the file * from the file system not supporting locking. Fcntl is documented * as returning EACCESS and EAGAIN; add EWOULDBLOCK for good measure, * and assume they are the former. There's no portable way to do this. */ return (errno == EACCES || errno == EAGAIN #ifdef EWOULDBLOCK || errno == EWOULDBLOCK #endif ? LOCK_UNAVAIL : LOCK_FAILED); } #endif #if !defined(HAVE_LOCK_FLOCK) && !defined(HAVE_LOCK_FCNTL) return (LOCK_SUCCESS); #endif } vigor-0.016.orig/common/exf.h0100644000076400007640000000545707103707215014526 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)exf.h 10.7 (Berkeley) 7/9/96 */ /* Undo direction. */ /* * exf -- * The file structure. */ struct _exf { int refcnt; /* Reference count. */ /* Underlying database state. */ DB *db; /* File db structure. */ char *c_lp; /* Cached line. */ size_t c_len; /* Cached line length. */ recno_t c_lno; /* Cached line number. */ recno_t c_nlines; /* Cached lines in the file. */ DB *log; /* Log db structure. */ char *l_lp; /* Log buffer. */ size_t l_len; /* Log buffer length. */ recno_t l_high; /* Log last + 1 record number. */ recno_t l_cur; /* Log current record number. */ MARK l_cursor; /* Log cursor position. */ dir_t lundo; /* Last undo direction. */ LIST_HEAD(_markh, _lmark) marks;/* Linked list of file MARK's. */ /* * XXX * Mtime should be a struct timespec, but time_t is more portable. */ dev_t mdev; /* Device. */ ino_t minode; /* Inode. */ time_t mtime; /* Last modification time. */ int fcntl_fd; /* Fcntl locking fd; see exf.c. */ /* * Recovery in general, and these fields specifically, are described * in recover.c. */ #define RCV_PERIOD 120 /* Sync every two minutes. */ char *rcv_path; /* Recover file name. */ char *rcv_mpath; /* Recover mail file name. */ int rcv_fd; /* Locked mail file descriptor. */ #define F_DEVSET 0x001 /* mdev/minode fields initialized. */ #define F_FIRSTMODIFY 0x002 /* File not yet modified. */ #define F_MODIFIED 0x004 /* File is currently dirty. */ #define F_MULTILOCK 0x008 /* Multiple processes running, lock. */ #define F_NOLOG 0x010 /* Logging turned off. */ #define F_RCV_NORM 0x020 /* Don't delete recovery files. */ #define F_RCV_ON 0x040 /* Recovery is possible. */ #define F_UNDO 0x080 /* No change since last undo. */ u_int8_t flags; }; /* Flags to db_get(). */ #define DBG_FATAL 0x001 /* If DNE, error message. */ #define DBG_NOCACHE 0x002 /* Ignore the front-end cache. */ /* Flags to file_init() and file_write(). */ #define FS_ALL 0x001 /* Write the entire file. */ #define FS_APPEND 0x002 /* Append to the file. */ #define FS_FORCE 0x004 /* Force is set. */ #define FS_OPENERR 0x008 /* Open failed, try it again. */ #define FS_POSSIBLE 0x010 /* Force could have been set. */ #define FS_SETALT 0x020 /* Set alternate file name. */ /* Flags to rcv_sync(). */ #define RCV_EMAIL 0x01 /* Send the user email, IFF file modified. */ #define RCV_ENDSESSION 0x02 /* End the file session. */ #define RCV_PRESERVE 0x04 /* Preserve backup file, IFF file modified. */ #define RCV_SNAPSHOT 0x08 /* Snapshot the recovery, and send email. */ vigor-0.016.orig/common/gs.h0100644000076400007640000001652607103707215014354 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)gs.h 10.34 (Berkeley) 9/24/96 */ #define TEMPORARY_FILE_STRING "/tmp" /* Default temporary file name. */ /* * File reference structure (FREF). The structure contains the name of the * file, along with the information that follows the name. * * !!! * The read-only bit follows the file name, not the file itself. */ struct _fref { CIRCLEQ_ENTRY(_fref) q; /* Linked list of file references. */ char *name; /* File name. */ char *tname; /* Backing temporary file name. */ recno_t lno; /* 1-N: file cursor line. */ size_t cno; /* 0-N: file cursor column. */ #define FR_CURSORSET 0x0001 /* If lno/cno values valid. */ #define FR_DONTDELETE 0x0002 /* Don't delete the temporary file. */ #define FR_EXNAMED 0x0004 /* Read/write renamed the file. */ #define FR_NAMECHANGE 0x0008 /* If the name changed. */ #define FR_NEWFILE 0x0010 /* File doesn't really exist yet. */ #define FR_RECOVER 0x0020 /* File is being recovered. */ #define FR_TMPEXIT 0x0040 /* Modified temporary file, no exit. */ #define FR_TMPFILE 0x0080 /* If file has no name. */ #define FR_UNLOCKED 0x0100 /* File couldn't be locked. */ u_int16_t flags; }; /* Action arguments to scr_exadjust(). */ typedef enum { EX_TERM_CE, EX_TERM_SCROLL } exadj_t; /* Screen attribute arguments to scr_attr(). */ typedef enum { SA_ALTERNATE, SA_INVERSE } scr_attr_t; /* Key type arguments to scr_keyval(). */ typedef enum { KEY_VEOF, KEY_VERASE, KEY_VKILL, KEY_VWERASE } scr_keyval_t; /* * GS: * * Structure that describes global state of the running program. */ struct _gs { char *progname; /* Programe name. */ int id; /* Last allocated screen id. */ CIRCLEQ_HEAD(_dqh, _scr) dq; /* Displayed screens. */ CIRCLEQ_HEAD(_hqh, _scr) hq; /* Hidden screens. */ SCR *ccl_sp; /* Colon command-line screen. */ void *perl_interp; /* Perl interpreter. */ void *tcl_interp; /* Tcl_Interp *: Tcl interpreter. */ void *cl_private; /* Curses support private area. */ void *ip_private; /* IP support private area. */ void *tk_private; /* Tk/Tcl support private area. */ /* File references. */ CIRCLEQ_HEAD(_frefh, _fref) frefq; #define GO_COLUMNS 0 /* Global options: columns. */ #define GO_LINES 1 /* Global options: lines. */ #define GO_SECURE 2 /* Global options: secure. */ #define GO_TERM 3 /* Global options: terminal type. */ OPTION opts[GO_TERM + 1]; DB *msg; /* Message catalog DB. */ MSGH msgq; /* User message list. */ #define DEFAULT_NOPRINT '\1' /* Emergency non-printable character. */ CHAR_T noprint; /* Cached, unprintable character. */ char *tmp_bp; /* Temporary buffer. */ size_t tmp_blen; /* Temporary buffer size. */ /* * Ex command structures (EXCMD). Defined here because ex commands * exist outside of any particular screen or file. */ #define EXCMD_RUNNING(gp) ((gp)->ecq.lh_first->clen != 0) LIST_HEAD(_excmdh, _excmd) ecq; /* Ex command linked list. */ EXCMD excmd; /* Default ex command structure. */ char *if_name; /* Current associated file. */ recno_t if_lno; /* Current associated line number. */ char *c_option; /* Ex initial, command-line command. */ #ifdef DEBUG FILE *tracefp; /* Trace file pointer. */ #endif EVENT *i_event; /* Array of input events. */ size_t i_nelem; /* Number of array elements. */ size_t i_cnt; /* Count of events. */ size_t i_next; /* Offset of next event. */ CB *dcbp; /* Default cut buffer pointer. */ CB dcb_store; /* Default cut buffer storage. */ LIST_HEAD(_cuth, _cb) cutq; /* Linked list of cut buffers. */ #define MAX_BIT_SEQ 128 /* Max + 1 fast check character. */ LIST_HEAD(_seqh, _seq) seqq; /* Linked list of maps, abbrevs. */ bitstr_t bit_decl(seqb, MAX_BIT_SEQ); #define MAX_FAST_KEY 254 /* Max fast check character.*/ #define KEY_LEN(sp, ch) \ ((unsigned char)(ch) <= MAX_FAST_KEY ? \ sp->gp->cname[(unsigned char)ch].len : v_key_len(sp, ch)) #define KEY_NAME(sp, ch) \ ((unsigned char)(ch) <= MAX_FAST_KEY ? \ sp->gp->cname[(unsigned char)ch].name : v_key_name(sp, ch)) struct { CHAR_T name[MAX_CHARACTER_COLUMNS + 1]; u_int8_t len; } cname[MAX_FAST_KEY + 1]; /* Fast lookup table. */ #define KEY_VAL(sp, ch) \ ((unsigned char)(ch) <= MAX_FAST_KEY ? \ sp->gp->special_key[(unsigned char)ch] : \ (unsigned char)(ch) > sp->gp->max_special ? 0 : v_key_val(sp,ch)) CHAR_T max_special; /* Max special character. */ u_char /* Fast lookup table. */ special_key[MAX_FAST_KEY + 1]; /* Flags. */ #define G_ABBREV 0x0001 /* If have abbreviations. */ #define G_BELLSCHED 0x0002 /* Bell scheduled. */ #define G_INTERRUPTED 0x0004 /* Interrupted. */ #define G_RECOVER_SET 0x0008 /* Recover system initialized. */ #define G_SCRIPTED 0x0010 /* Ex script session. */ #define G_SCRWIN 0x0020 /* Scripting windows running. */ #define G_SNAPSHOT 0x0040 /* Always snapshot files. */ #define G_SRESTART 0x0080 /* Screen restarted. */ #define G_TMP_INUSE 0x0100 /* Temporary buffer in use. */ u_int32_t flags; /* Screen interface functions. */ /* Add a string to the screen. */ int (*scr_addstr) __P((SCR *, const char *, size_t)); /* Toggle a screen attribute. */ int (*scr_attr) __P((SCR *, scr_attr_t, int)); /* Terminal baud rate. */ int (*scr_baud) __P((SCR *, u_long *)); /* Beep/bell/flash the terminal. */ int (*scr_bell) __P((SCR *)); /* Display a busy message. */ void (*scr_busy) __P((SCR *, const char *, busy_t)); /* Clear to the end of the line. */ int (*scr_clrtoeol) __P((SCR *)); /* Return the cursor location. */ int (*scr_cursor) __P((SCR *, size_t *, size_t *)); /* Delete a line. */ int (*scr_deleteln) __P((SCR *)); /* Get a keyboard event. */ int (*scr_event) __P((SCR *, EVENT *, u_int32_t, int)); /* Ex: screen adjustment routine. */ int (*scr_ex_adjust) __P((SCR *, exadj_t)); int (*scr_fmap) /* Set a function key. */ __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); /* Get terminal key value. */ int (*scr_keyval) __P((SCR *, scr_keyval_t, CHAR_T *, int *)); /* Insert a line. */ int (*scr_insertln) __P((SCR *)); /* Handle an option change. */ int (*scr_optchange) __P((SCR *, int, char *, u_long *)); /* Move the cursor. */ int (*scr_move) __P((SCR *, size_t, size_t)); /* Message or ex output. */ void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); /* Refresh the screen. */ int (*scr_refresh) __P((SCR *, int)); /* Rename the file. */ int (*scr_rename) __P((SCR *, char *, int)); /* Set the screen type. */ int (*scr_screen) __P((SCR *, u_int32_t)); /* Suspend the editor. */ int (*scr_suspend) __P((SCR *, int *)); /* Print usage message. */ void (*scr_usage) __P((void)); }; /* * XXX * Block signals if there are asynchronous events. Used to keep DB system calls * from being interrupted and not restarted, as that will result in consistency * problems. This should be handled by DB. */ #ifdef BLOCK_SIGNALS #include extern sigset_t __sigblockset; #define SIGBLOCK \ (void)sigprocmask(SIG_BLOCK, &__sigblockset, NULL) #define SIGUNBLOCK \ (void)sigprocmask(SIG_UNBLOCK, &__sigblockset, NULL); #else #define SIGBLOCK #define SIGUNBLOCK #endif vigor-0.016.orig/common/key.c0100644000076400007640000005724007103707215014524 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)key.c 10.33 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "../vi/vi.h" static int v_event_append __P((SCR *, EVENT *)); static int v_event_grow __P((SCR *, int)); static int v_key_cmp __P((const void *, const void *)); static void v_keyval __P((SCR *, int, scr_keyval_t)); static void v_sync __P((SCR *, int)); /* * !!! * Historic vi always used: * * ^D: autoindent deletion * ^H: last character deletion * ^W: last word deletion * ^Q: quote the next character (if not used in flow control). * ^V: quote the next character * * regardless of the user's choices for these characters. The user's erase * and kill characters worked in addition to these characters. Nvi wires * down the above characters, but in addition permits the VEOF, VERASE, VKILL * and VWERASE characters described by the user's termios structure. * * Ex was not consistent with this scheme, as it historically ran in tty * cooked mode. This meant that the scroll command and autoindent erase * characters were mapped to the user's EOF character, and the character * and word deletion characters were the user's tty character and word * deletion characters. This implementation makes it all consistent, as * described above for vi. * * !!! * This means that all screens share a special key set. */ KEYLIST keylist[] = { {K_BACKSLASH, '\\'}, /* \ */ {K_CARAT, '^'}, /* ^ */ {K_CNTRLD, '\004'}, /* ^D */ {K_CNTRLR, '\022'}, /* ^R */ {K_CNTRLT, '\024'}, /* ^T */ {K_CNTRLZ, '\032'}, /* ^Z */ {K_COLON, ':'}, /* : */ {K_CR, '\r'}, /* \r */ {K_ESCAPE, '\033'}, /* ^[ */ {K_FORMFEED, '\f'}, /* \f */ {K_HEXCHAR, '\030'}, /* ^X */ {K_NL, '\n'}, /* \n */ {K_RIGHTBRACE, '}'}, /* } */ {K_RIGHTPAREN, ')'}, /* ) */ {K_TAB, '\t'}, /* \t */ {K_VERASE, '\b'}, /* \b */ {K_VKILL, '\025'}, /* ^U */ {K_VLNEXT, '\021'}, /* ^Q */ {K_VLNEXT, '\026'}, /* ^V */ {K_VWERASE, '\027'}, /* ^W */ {K_ZERO, '0'}, /* 0 */ #define ADDITIONAL_CHARACTERS 4 {K_NOTUSED, 0}, /* VEOF, VERASE, VKILL, VWERASE */ {K_NOTUSED, 0}, {K_NOTUSED, 0}, {K_NOTUSED, 0}, }; static int nkeylist = (sizeof(keylist) / sizeof(keylist[0])) - ADDITIONAL_CHARACTERS; /* * v_key_init -- * Initialize the special key lookup table. * * PUBLIC: int v_key_init __P((SCR *)); */ int v_key_init(sp) SCR *sp; { CHAR_T ch; GS *gp; KEYLIST *kp; int cnt; gp = sp->gp; /* * XXX * 8-bit only, for now. Recompilation should get you any 8-bit * character set, as long as nul isn't a character. */ (void)setlocale(LC_ALL, ""); #if __linux__ /* * In libc 4.5.26, setlocale(LC_ALL, ""), doesn't setup the table * for ctype(3c) correctly. This bug is fixed in libc 4.6.x. * * This code works around this problem for libc 4.5.x users. * Note that this code is harmless if you're using libc 4.6.x. */ (void)setlocale(LC_CTYPE, ""); #endif v_key_ilookup(sp); v_keyval(sp, K_CNTRLD, KEY_VEOF); v_keyval(sp, K_VERASE, KEY_VERASE); v_keyval(sp, K_VKILL, KEY_VKILL); v_keyval(sp, K_VWERASE, KEY_VWERASE); /* Sort the special key list. */ qsort(keylist, nkeylist, sizeof(keylist[0]), v_key_cmp); /* Initialize the fast lookup table. */ for (gp->max_special = 0, kp = keylist, cnt = nkeylist; cnt--; ++kp) { if (gp->max_special < kp->value) gp->max_special = kp->value; if (kp->ch <= MAX_FAST_KEY) gp->special_key[kp->ch] = kp->value; } /* Find a non-printable character to use as a message separator. */ for (ch = 1; ch <= MAX_CHAR_T; ++ch) if (!isprint(ch)) { gp->noprint = ch; break; } if (ch != gp->noprint) { msgq(sp, M_ERR, "079|No non-printable character found"); return (1); } return (0); } /* * v_keyval -- * Set key values. * * We've left some open slots in the keylist table, and if these values exist, * we put them into place. Note, they may reset (or duplicate) values already * in the table, so we check for that first. */ static void v_keyval(sp, val, name) SCR *sp; int val; scr_keyval_t name; { KEYLIST *kp; CHAR_T ch; int dne; /* Get the key's value from the screen. */ if (sp->gp->scr_keyval(sp, name, &ch, &dne)) return; if (dne) return; /* Check for duplication. */ for (kp = keylist; kp->value != K_NOTUSED; ++kp) if (kp->ch == ch) { kp->value = val; return; } /* Add a new entry. */ if (kp->value == K_NOTUSED) { keylist[nkeylist].ch = ch; keylist[nkeylist].value = val; ++nkeylist; } } /* * v_key_ilookup -- * Build the fast-lookup key display array. * * PUBLIC: void v_key_ilookup __P((SCR *)); */ void v_key_ilookup(sp) SCR *sp; { CHAR_T ch, *p, *t; GS *gp; size_t len; for (gp = sp->gp, ch = 0; ch <= MAX_FAST_KEY; ++ch) for (p = gp->cname[ch].name, t = v_key_name(sp, ch), len = gp->cname[ch].len = sp->clen; len--;) *p++ = *t++; } /* * v_key_len -- * Return the length of the string that will display the key. * This routine is the backup for the KEY_LEN() macro. * * PUBLIC: size_t v_key_len __P((SCR *, ARG_CHAR_T)); */ size_t v_key_len(sp, ch) SCR *sp; ARG_CHAR_T ch; { (void)v_key_name(sp, ch); return (sp->clen); } /* * v_key_name -- * Return the string that will display the key. This routine * is the backup for the KEY_NAME() macro. * * PUBLIC: CHAR_T *v_key_name __P((SCR *, ARG_CHAR_T)); */ CHAR_T * v_key_name(sp, ach) SCR *sp; ARG_CHAR_T ach; { static const CHAR_T hexdigit[] = "0123456789abcdef"; static const CHAR_T octdigit[] = "01234567"; CHAR_T ch, *chp, mask; size_t len; int cnt, shift; ch = ach; /* See if the character was explicitly declared printable or not. */ if ((chp = O_STR(sp, O_PRINT)) != NULL) for (; *chp != '\0'; ++chp) if (*chp == ch) goto pr; if ((chp = O_STR(sp, O_NOPRINT)) != NULL) for (; *chp != '\0'; ++chp) if (*chp == ch) goto nopr; /* * Historical (ARPA standard) mappings. Printable characters are left * alone. Control characters less than 0x20 are represented as '^' * followed by the character offset from the '@' character in the ASCII * character set. Del (0x7f) is represented as '^' followed by '?'. * * XXX * The following code depends on the current locale being identical to * the ASCII map from 0x40 to 0x5f (since 0x1f + 0x40 == 0x5f). I'm * told that this is a reasonable assumption... * * XXX * This code will only work with CHAR_T's that are multiples of 8-bit * bytes. * * XXX * NB: There's an assumption here that all printable characters take * up a single column on the screen. This is not always correct. */ if (isprint(ch)) { pr: sp->cname[0] = ch; len = 1; goto done; } nopr: if (iscntrl(ch) && (ch < 0x20 || ch == 0x7f)) { sp->cname[0] = '^'; sp->cname[1] = ch == 0x7f ? '?' : '@' + ch; len = 2; } else if (O_ISSET(sp, O_OCTAL)) { #define BITS (sizeof(CHAR_T) * 8) #define SHIFT (BITS - BITS % 3) #define TOPMASK (BITS % 3 == 2 ? 3 : 1) << (BITS - BITS % 3) sp->cname[0] = '\\'; sp->cname[1] = octdigit[(ch & TOPMASK) >> SHIFT]; shift = SHIFT - 3; for (len = 2, mask = 7 << (SHIFT - 3), cnt = BITS / 3; cnt-- > 0; mask >>= 3, shift -= 3) sp->cname[len++] = octdigit[(ch & mask) >> shift]; } else { sp->cname[0] = '\\'; sp->cname[1] = 'x'; for (len = 2, chp = (u_int8_t *)&ch, cnt = sizeof(CHAR_T); cnt-- > 0; ++chp) { sp->cname[len++] = hexdigit[(*chp & 0xf0) >> 4]; sp->cname[len++] = hexdigit[*chp & 0x0f]; } } done: sp->cname[sp->clen = len] = '\0'; return (sp->cname); } /* * v_key_val -- * Fill in the value for a key. This routine is the backup * for the KEY_VAL() macro. * * PUBLIC: int v_key_val __P((SCR *, ARG_CHAR_T)); */ int v_key_val(sp, ch) SCR *sp; ARG_CHAR_T ch; { KEYLIST k, *kp; k.ch = ch; kp = bsearch(&k, keylist, nkeylist, sizeof(keylist[0]), v_key_cmp); return (kp == NULL ? K_NOTUSED : kp->value); } /* * v_event_push -- * Push events/keys onto the front of the buffer. * * There is a single input buffer in ex/vi. Characters are put onto the * end of the buffer by the terminal input routines, and pushed onto the * front of the buffer by various other functions in ex/vi. Each key has * an associated flag value, which indicates if it has already been quoted, * and if it is the result of a mapping or an abbreviation. * * PUBLIC: int v_event_push __P((SCR *, EVENT *, CHAR_T *, size_t, u_int)); */ int v_event_push(sp, p_evp, p_s, nitems, flags) SCR *sp; EVENT *p_evp; /* Push event. */ CHAR_T *p_s; /* Push characters. */ size_t nitems; /* Number of items to push. */ u_int flags; /* CH_* flags. */ { EVENT *evp; GS *gp; size_t total; /* If we have room, stuff the items into the buffer. */ gp = sp->gp; if (nitems <= gp->i_next || (gp->i_event != NULL && gp->i_cnt == 0 && nitems <= gp->i_nelem)) { if (gp->i_cnt != 0) gp->i_next -= nitems; goto copy; } /* * If there are currently items in the queue, shift them up, * leaving some extra room. Get enough space plus a little * extra. */ #define TERM_PUSH_SHIFT 30 total = gp->i_cnt + gp->i_next + nitems + TERM_PUSH_SHIFT; if (total >= gp->i_nelem && v_event_grow(sp, MAX(total, 64))) return (1); if (gp->i_cnt) MEMMOVE(gp->i_event + TERM_PUSH_SHIFT + nitems, gp->i_event + gp->i_next, gp->i_cnt); gp->i_next = TERM_PUSH_SHIFT; /* Put the new items into the queue. */ copy: gp->i_cnt += nitems; for (evp = gp->i_event + gp->i_next; nitems--; ++evp) { if (p_evp != NULL) *evp = *p_evp++; else { evp->e_event = E_CHARACTER; evp->e_c = *p_s++; evp->e_value = KEY_VAL(sp, evp->e_c); F_INIT(&evp->e_ch, flags); } } return (0); } /* * v_event_append -- * Append events onto the tail of the buffer. */ static int v_event_append(sp, argp) SCR *sp; EVENT *argp; { CHAR_T *s; /* Characters. */ EVENT *evp; GS *gp; size_t nevents; /* Number of events. */ /* Grow the buffer as necessary. */ nevents = argp->e_event == E_STRING ? argp->e_len : 1; gp = sp->gp; if (gp->i_event == NULL || nevents > gp->i_nelem - (gp->i_next + gp->i_cnt)) v_event_grow(sp, MAX(nevents, 64)); evp = gp->i_event + gp->i_next + gp->i_cnt; gp->i_cnt += nevents; /* Transform strings of characters into single events. */ if (argp->e_event == E_STRING) for (s = argp->e_csp; nevents--; ++evp) { evp->e_event = E_CHARACTER; evp->e_c = *s++; evp->e_value = KEY_VAL(sp, evp->e_c); evp->e_flags = 0; } else *evp = *argp; return (0); } /* Remove events from the queue. */ #define QREM(len) { \ if ((gp->i_cnt -= len) == 0) \ gp->i_next = 0; \ else \ gp->i_next += len; \ } /* * v_event_get -- * Return the next event. * * !!! * The flag EC_NODIGIT probably needs some explanation. First, the idea of * mapping keys is that one or more keystrokes act like a function key. * What's going on is that vi is reading a number, and the character following * the number may or may not be mapped (EC_MAPCOMMAND). For example, if the * user is entering the z command, a valid command is "z40+", and we don't want * to map the '+', i.e. if '+' is mapped to "xxx", we don't want to change it * into "z40xxx". However, if the user enters "35x", we want to put all of the * characters through the mapping code. * * Historical practice is a bit muddled here. (Surprise!) It always permitted * mapping digits as long as they weren't the first character of the map, e.g. * ":map ^A1 xxx" was okay. It also permitted the mapping of the digits 1-9 * (the digit 0 was a special case as it doesn't indicate the start of a count) * as the first character of the map, but then ignored those mappings. While * it's probably stupid to map digits, vi isn't your mother. * * The way this works is that the EC_MAPNODIGIT causes term_key to return the * end-of-digit without "looking" at the next character, i.e. leaving it as the * user entered it. Presumably, the next term_key call will tell us how the * user wants it handled. * * There is one more complication. Users might map keys to digits, and, as * it's described above, the commands: * * :map g 1G * d2g * * would return the keys "d21G", when the user probably wanted * "d21G". So, if a map starts off with a digit we continue as * before, otherwise, we pretend we haven't mapped the character, and return * . * * Now that that's out of the way, let's talk about Energizer Bunny macros. * It's easy to create macros that expand to a loop, e.g. map x 3x. It's * fairly easy to detect this example, because it's all internal to term_key. * If we're expanding a macro and it gets big enough, at some point we can * assume it's looping and kill it. The examples that are tough are the ones * where the parser is involved, e.g. map x "ayyx"byy. We do an expansion * on 'x', and get "ayyx"byy. We then return the first 4 characters, and then * find the looping macro again. There is no way that we can detect this * without doing a full parse of the command, because the character that might * cause the loop (in this case 'x') may be a literal character, e.g. the map * map x "ayy"xyy"byy is perfectly legal and won't cause a loop. * * Historic vi tried to detect looping macros by disallowing obvious cases in * the map command, maps that that ended with the same letter as they started * (which wrongly disallowed "map x 'x"), and detecting macros that expanded * too many times before keys were returned to the command parser. It didn't * get many (most?) of the tricky cases right, however, and it was certainly * possible to create macros that ran forever. And, even if it did figure out * what was going on, the user was usually tossed into ex mode. Finally, any * changes made before vi realized that the macro was recursing were left in * place. We recover gracefully, but the only recourse the user has in an * infinite macro loop is to interrupt. * * !!! * It is historic practice that mapping characters to themselves as the first * part of the mapped string was legal, and did not cause infinite loops, i.e. * ":map! { {^M^T" and ":map n nz." were known to work. The initial, matching * characters were returned instead of being remapped. * * !!! * It is also historic practice that the macro "map ] ]]^" caused a single ] * keypress to behave as the command ]] (the ^ got the map past the vi check * for "tail recursion"). Conversely, the mapping "map n nn^" went recursive. * What happened was that, in the historic vi, maps were expanded as the keys * were retrieved, but not all at once and not centrally. So, the keypress ] * pushed ]]^ on the stack, and then the first ] from the stack was passed to * the ]] command code. The ]] command then retrieved a key without entering * the mapping code. This could bite us anytime a user has a map that depends * on secondary keys NOT being mapped. I can't see any possible way to make * this work in here without the complete abandonment of Rationality Itself. * * XXX * The final issue is recovery. It would be possible to undo all of the work * that was done by the macro if we entered a record into the log so that we * knew when the macro started, and, in fact, this might be worth doing at some * point. Given that this might make the log grow unacceptably (consider that * cursor keys are done with maps), for now we leave any changes made in place. * * PUBLIC: int v_event_get __P((SCR *, EVENT *, int, u_int32_t)); */ int v_event_get(sp, argp, timeout, flags) SCR *sp; EVENT *argp; int timeout; u_int32_t flags; { EVENT *evp, ev; GS *gp; SEQ *qp; int init_nomap, ispartial, istimeout, remap_cnt; gp = sp->gp; /* If simply checking for interrupts, argp may be NULL. */ if (argp == NULL) argp = &ev; retry: istimeout = remap_cnt = 0; /* * If the queue isn't empty and we're timing out for characters, * return immediately. */ if (gp->i_cnt != 0 && LF_ISSET(EC_TIMEOUT)) return (0); /* * If the queue is empty, we're checking for interrupts, or we're * timing out for characters, get more events. */ if (gp->i_cnt == 0 || LF_ISSET(EC_INTERRUPT | EC_TIMEOUT)) { /* * If we're reading new characters, check any scripting * windows for input. */ if (F_ISSET(gp, G_SCRWIN) && sscr_input(sp)) return (1); loop: if (gp->scr_event(sp, argp, LF_ISSET(EC_INTERRUPT | EC_QUOTED | EC_RAW), timeout)) return (1); switch (argp->e_event) { case E_ERR: case E_SIGHUP: case E_SIGTERM: /* * Fatal conditions cause the file to be synced to * disk immediately. */ v_sync(sp, RCV_ENDSESSION | RCV_PRESERVE | (argp->e_event == E_SIGTERM ? 0: RCV_EMAIL)); return (1); case E_TIMEOUT: istimeout = 1; break; case E_INTERRUPT: /* Set the global interrupt flag. */ F_SET(sp->gp, G_INTERRUPTED); /* * If the caller was interested in interrupts, return * immediately. */ if (LF_ISSET(EC_INTERRUPT)) return (0); goto append; default: append: if (v_event_append(sp, argp)) return (1); break; } } /* * If the caller was only interested in interrupts or timeouts, return * immediately. (We may have gotten characters, and that's okay, they * were queued up for later use.) */ if (LF_ISSET(EC_INTERRUPT | EC_TIMEOUT)) return (0); newmap: evp = &gp->i_event[gp->i_next]; /* * If the next event in the queue isn't a character event, return * it, we're done. */ if (evp->e_event != E_CHARACTER) { *argp = *evp; QREM(1); return (0); } /* * If the key isn't mappable because: * * + ... the timeout has expired * + ... it's not a mappable key * + ... neither the command or input map flags are set * + ... there are no maps that can apply to it * * return it forthwith. */ if (istimeout || F_ISSET(&evp->e_ch, CH_NOMAP) || !LF_ISSET(EC_MAPCOMMAND | EC_MAPINPUT) || evp->e_c < MAX_BIT_SEQ && !bit_test(gp->seqb, evp->e_c)) goto nomap; /* Search the map. */ qp = seq_find(sp, NULL, evp, NULL, gp->i_cnt, LF_ISSET(EC_MAPCOMMAND) ? SEQ_COMMAND : SEQ_INPUT, &ispartial); /* * If get a partial match, get more characters and retry the map. * If time out without further characters, return the characters * unmapped. * * !!! * characters are a problem. Cursor keys start with * characters, so there's almost always a map in place that begins with * an character. If we timeout keys in the same way * that we timeout other keys, the user will get a noticeable pause as * they enter to terminate input mode. If key timeout is set * for a slow link, users will get an even longer pause. Nvi used to * simply timeout characters at 1/10th of a second, but this * loses over PPP links where the latency is greater than 100Ms. */ if (ispartial) { if (O_ISSET(sp, O_TIMEOUT)) timeout = (evp->e_value == K_ESCAPE ? O_VAL(sp, O_ESCAPETIME) : O_VAL(sp, O_KEYTIME)) * 100; else timeout = 0; goto loop; } /* If no map, return the character. */ if (qp == NULL) { nomap: if (!isdigit(evp->e_c) && LF_ISSET(EC_MAPNODIGIT)) goto not_digit; *argp = *evp; QREM(1); return (0); } /* * If looking for the end of a digit string, and the first character * of the map is it, pretend we haven't seen the character. */ if (LF_ISSET(EC_MAPNODIGIT) && qp->output != NULL && !isdigit(qp->output[0])) { not_digit: argp->e_c = CH_NOT_DIGIT; argp->e_value = K_NOTUSED; argp->e_event = E_CHARACTER; F_INIT(&argp->e_ch, 0); return (0); } /* Find out if the initial segments are identical. */ init_nomap = !e_memcmp(qp->output, &gp->i_event[gp->i_next], qp->ilen); /* Delete the mapped characters from the queue. */ QREM(qp->ilen); /* If keys mapped to nothing, go get more. */ if (qp->output == NULL) goto retry; /* If remapping characters... */ if (O_ISSET(sp, O_REMAP)) { /* * Periodically check for interrupts. Always check the first * time through, because it's possible to set up a map that * will return a character every time, but will expand to more, * e.g. "map! a aaaa" will always return a 'a', but we'll never * get anywhere useful. */ if ((++remap_cnt == 1 || remap_cnt % 10 == 0) && (gp->scr_event(sp, &ev, EC_INTERRUPT, 0) || ev.e_event == E_INTERRUPT)) { F_SET(sp->gp, G_INTERRUPTED); argp->e_event = E_INTERRUPT; return (0); } /* * If an initial part of the characters mapped, they are not * further remapped -- return the first one. Push the rest * of the characters, or all of the characters if no initial * part mapped, back on the queue. */ if (init_nomap) { if (v_event_push(sp, NULL, qp->output + qp->ilen, qp->olen - qp->ilen, CH_MAPPED)) return (1); if (v_event_push(sp, NULL, qp->output, qp->ilen, CH_NOMAP | CH_MAPPED)) return (1); evp = &gp->i_event[gp->i_next]; goto nomap; } if (v_event_push(sp, NULL, qp->output, qp->olen, CH_MAPPED)) return (1); goto newmap; } /* Else, push the characters on the queue and return one. */ if (v_event_push(sp, NULL, qp->output, qp->olen, CH_MAPPED | CH_NOMAP)) return (1); goto nomap; } /* * v_sync -- * Walk the screen lists, sync'ing files to their backup copies. */ static void v_sync(sp, flags) SCR *sp; int flags; { GS *gp; gp = sp->gp; for (sp = gp->dq.cqh_first; sp != (void *)&gp->dq; sp = sp->q.cqe_next) rcv_sync(sp, flags); for (sp = gp->hq.cqh_first; sp != (void *)&gp->hq; sp = sp->q.cqe_next) rcv_sync(sp, flags); } /* * v_event_err -- * Unexpected event. * * PUBLIC: void v_event_err __P((SCR *, EVENT *)); */ void v_event_err(sp, evp) SCR *sp; EVENT *evp; { switch (evp->e_event) { case E_CHARACTER: msgq(sp, M_ERR, "276|Unexpected character event"); break; case E_EOF: msgq(sp, M_ERR, "277|Unexpected end-of-file event"); break; case E_INTERRUPT: msgq(sp, M_ERR, "279|Unexpected interrupt event"); break; case E_QUIT: msgq(sp, M_ERR, "280|Unexpected quit event"); break; case E_REPAINT: msgq(sp, M_ERR, "281|Unexpected repaint event"); break; case E_STRING: msgq(sp, M_ERR, "285|Unexpected string event"); break; case E_TIMEOUT: msgq(sp, M_ERR, "286|Unexpected timeout event"); break; case E_WRESIZE: msgq(sp, M_ERR, "316|Unexpected resize event"); break; case E_WRITE: msgq(sp, M_ERR, "287|Unexpected write event"); break; /* * Theoretically, none of these can occur, as they're handled at the * top editor level. */ case E_ERR: case E_SIGHUP: case E_SIGTERM: default: abort(); } /* Free any allocated memory. */ if (evp->e_asp != NULL) free(evp->e_asp); } /* * v_event_flush -- * Flush any flagged keys, returning if any keys were flushed. * * PUBLIC: int v_event_flush __P((SCR *, u_int)); */ int v_event_flush(sp, flags) SCR *sp; u_int flags; { GS *gp; int rval; for (rval = 0, gp = sp->gp; gp->i_cnt != 0 && F_ISSET(&gp->i_event[gp->i_next].e_ch, flags); rval = 1) QREM(1); return (rval); } /* * v_event_grow -- * Grow the terminal queue. */ static int v_event_grow(sp, add) SCR *sp; int add; { GS *gp; size_t new_nelem, olen; gp = sp->gp; new_nelem = gp->i_nelem + add; olen = gp->i_nelem * sizeof(gp->i_event[0]); BINC_RET(sp, gp->i_event, olen, new_nelem * sizeof(gp->i_event[0])); gp->i_nelem = olen / sizeof(gp->i_event[0]); return (0); } /* * v_key_cmp -- * Compare two keys for sorting. */ static int v_key_cmp(ap, bp) const void *ap, *bp; { return (((KEYLIST *)ap)->ch - ((KEYLIST *)bp)->ch); } vigor-0.016.orig/common/key.h0100644000076400007640000001763707103707215014537 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)key.h 10.18 (Berkeley) 6/30/96 */ /* * Fundamental character types. * * CHAR_T An integral type that can hold any character. * ARG_CHAR_T The type of a CHAR_T when passed as an argument using * traditional promotion rules. It should also be able * to be compared against any CHAR_T for equality without * problems. * MAX_CHAR_T The maximum value of any character. * * If no integral type can hold a character, don't even try the port. */ typedef u_char CHAR_T; typedef u_int ARG_CHAR_T; #define MAX_CHAR_T 0xff /* The maximum number of columns any character can take up on a screen. */ #define MAX_CHARACTER_COLUMNS 4 /* * Event types. * * The program structure depends on the event loop being able to return * E_EOF/E_ERR multiple times -- eventually enough things will end due * to the events that vi will reach the command level for the screen, at * which point the exit flags will be set and vi will exit. */ typedef enum { E_NOTUSED = 0, /* Not set. */ E_CHARACTER, /* Input character: e_c set. */ E_EOF, /* End of input (NOT ^D). */ E_ERR, /* Input error. */ E_INTERRUPT, /* Interrupt. */ E_QUIT, /* Quit. */ E_REPAINT, /* Repaint: e_flno, e_tlno set. */ E_SIGHUP, /* SIGHUP. */ E_SIGTERM, /* SIGTERM. */ E_STRING, /* Input string: e_csp, e_len set. */ E_TIMEOUT, /* Timeout. */ E_WRESIZE, /* Window resize. */ E_WRITE /* Write. */ } e_event_t; /* * Character values. */ typedef enum { K_NOTUSED = 0, /* Not set. */ K_BACKSLASH, /* \ */ K_CARAT, /* ^ */ K_CNTRLD, /* ^D */ K_CNTRLR, /* ^R */ K_CNTRLT, /* ^T */ K_CNTRLZ, /* ^Z */ K_COLON, /* : */ K_CR, /* \r */ K_ESCAPE, /* ^[ */ K_FORMFEED, /* \f */ K_HEXCHAR, /* ^X */ K_NL, /* \n */ K_RIGHTBRACE, /* } */ K_RIGHTPAREN, /* ) */ K_TAB, /* \t */ K_VERASE, /* set from tty: default ^H */ K_VKILL, /* set from tty: default ^U */ K_VLNEXT, /* set from tty: default ^V */ K_VWERASE, /* set from tty: default ^W */ K_ZERO /* 0 */ } e_key_t; struct _event { TAILQ_ENTRY(_event) q; /* Linked list of events. */ e_event_t e_event; /* Event type. */ union { struct { /* Input character. */ CHAR_T c; /* Character. */ e_key_t value; /* Key type. */ #define CH_ABBREVIATED 0x01 /* Character is from an abbreviation. */ #define CH_MAPPED 0x02 /* Character is from a map. */ #define CH_NOMAP 0x04 /* Do not map the character. */ #define CH_QUOTED 0x08 /* Character is already quoted. */ u_int8_t flags; } _e_ch; #define e_ch _u_event._e_ch /* !!! The structure, not the char. */ #define e_c _u_event._e_ch.c #define e_value _u_event._e_ch.value #define e_flags _u_event._e_ch.flags struct { /* Screen position, size. */ size_t lno1; /* Line number. */ size_t cno1; /* Column number. */ size_t lno2; /* Line number. */ size_t cno2; /* Column number. */ } _e_mark; #define e_lno _u_event._e_mark.lno1 /* Single location. */ #define e_cno _u_event._e_mark.cno1 #define e_flno _u_event._e_mark.lno1 /* Text region. */ #define e_fcno _u_event._e_mark.cno1 #define e_tlno _u_event._e_mark.lno2 #define e_tcno _u_event._e_mark.cno2 struct { /* Input string. */ CHAR_T *asp; /* Allocated string. */ CHAR_T *csp; /* String. */ size_t len; /* String length. */ } _e_str; #define e_asp _u_event._e_str.asp #define e_csp _u_event._e_str.csp #define e_len _u_event._e_str.len } _u_event; }; typedef struct _keylist { e_key_t value; /* Special value. */ CHAR_T ch; /* Key. */ } KEYLIST; extern KEYLIST keylist[]; /* Return if more keys in queue. */ #define KEYS_WAITING(sp) ((sp)->gp->i_cnt != 0) #define MAPPED_KEYS_WAITING(sp) \ (KEYS_WAITING(sp) && \ F_ISSET(&sp->gp->i_event[sp->gp->i_next].e_ch, CH_MAPPED)) /* * Ex/vi commands are generally separated by whitespace characters. We * can't use the standard isspace(3) macro because it returns true for * characters like ^K in the ASCII character set. The 4.4BSD isblank(3) * macro does exactly what we want, but it's not portable yet. * * XXX * Note side effect, ch is evaluated multiple times. */ #ifndef isblank #define isblank(ch) ((ch) == ' ' || (ch) == '\t') #endif /* The "standard" tab width, for displaying things to users. */ #define STANDARD_TAB 6 /* Various special characters, messages. */ #define CH_BSEARCH '?' /* Backward search prompt. */ #define CH_CURSOR ' ' /* Cursor character. */ #define CH_ENDMARK '$' /* End of a range. */ #define CH_EXPROMPT ':' /* Ex prompt. */ #define CH_FSEARCH '/' /* Forward search prompt. */ #define CH_HEX '\030' /* Leading hex character. */ #define CH_LITERAL '\026' /* ASCII ^V. */ #define CH_NO 'n' /* No. */ #define CH_NOT_DIGIT 'a' /* A non-isdigit() character. */ #define CH_QUIT 'q' /* Quit. */ #define CH_YES 'y' /* Yes. */ /* * Checking for interrupts means that we look at the bit that gets set if the * screen code supports asynchronous events, and call back into the event code * so that non-asynchronous screens get a chance to post the interrupt. * * INTERRUPT_CHECK is the number of lines "operated" on before checking for * interrupts. */ #define INTERRUPT_CHECK 100 #define INTERRUPTED(sp) \ (F_ISSET((sp)->gp, G_INTERRUPTED) || \ (!v_event_get(sp, NULL, 0, EC_INTERRUPT) && \ F_ISSET((sp)->gp, G_INTERRUPTED))) #define CLR_INTERRUPT(sp) \ F_CLR((sp)->gp, G_INTERRUPTED) /* Flags describing types of characters being requested. */ #define EC_INTERRUPT 0x001 /* Checking for interrupts. */ #define EC_MAPCOMMAND 0x002 /* Apply the command map. */ #define EC_MAPINPUT 0x004 /* Apply the input map. */ #define EC_MAPNODIGIT 0x008 /* Return to a digit. */ #define EC_QUOTED 0x010 /* Try to quote next character */ #define EC_RAW 0x020 /* Any next character. XXX: not used. */ #define EC_TIMEOUT 0x040 /* Timeout to next character. */ /* Flags describing text input special cases. */ #define TXT_ADDNEWLINE 0x00000001 /* Replay starts on a new line. */ #define TXT_AICHARS 0x00000002 /* Leading autoindent chars. */ #define TXT_ALTWERASE 0x00000004 /* Option: altwerase. */ #define TXT_APPENDEOL 0x00000008 /* Appending after EOL. */ #define TXT_AUTOINDENT 0x00000010 /* Autoindent set this line. */ #define TXT_BACKSLASH 0x00000020 /* Backslashes escape characters. */ #define TXT_BEAUTIFY 0x00000040 /* Only printable characters. */ #define TXT_BS 0x00000080 /* Backspace returns the buffer. */ #define TXT_CEDIT 0x00000100 /* Can return TERM_CEDIT. */ #define TXT_CNTRLD 0x00000200 /* Control-D is a command. */ #define TXT_CNTRLT 0x00000400 /* Control-T is an indent special. */ #define TXT_CR 0x00000800 /* CR returns the buffer. */ #define TXT_DOTTERM 0x00001000 /* Leading '.' terminates the input. */ #define TXT_EMARK 0x00002000 /* End of replacement mark. */ #define TXT_EOFCHAR 0x00004000 /* ICANON set, return EOF character. */ #define TXT_ESCAPE 0x00008000 /* Escape returns the buffer. */ #define TXT_FILEC 0x00010000 /* Option: filec. */ #define TXT_INFOLINE 0x00020000 /* Editing the info line. */ #define TXT_MAPINPUT 0x00040000 /* Apply the input map. */ #define TXT_NLECHO 0x00080000 /* Echo the newline. */ #define TXT_NUMBER 0x00100000 /* Number the line. */ #define TXT_OVERWRITE 0x00200000 /* Overwrite characters. */ #define TXT_PROMPT 0x00400000 /* Display a prompt. */ #define TXT_RECORD 0x00800000 /* Record for replay. */ #define TXT_REPLACE 0x01000000 /* Replace; don't delete overwrite. */ #define TXT_REPLAY 0x02000000 /* Replay the last input. */ #define TXT_RESOLVE 0x04000000 /* Resolve the text into the file. */ #define TXT_SEARCHINCR 0x08000000 /* Incremental search. */ #define TXT_SHOWMATCH 0x10000000 /* Option: showmatch. */ #define TXT_TTYWERASE 0x20000000 /* Option: ttywerase. */ #define TXT_WRAPMARGIN 0x40000000 /* Option: wrapmargin. */ vigor-0.016.orig/common/line.c0100644000076400007640000002706107103707215014661 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)line.c 10.21 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "common.h" #include "../vi/vi.h" static int scr_update __P((SCR *, recno_t, lnop_t, int)); /* * db_eget -- * Front-end to db_get, special case handling for empty files. * * PUBLIC: int db_eget __P((SCR *, recno_t, char **, size_t *, int *)); */ int db_eget(sp, lno, pp, lenp, isemptyp) SCR *sp; recno_t lno; /* Line number. */ char **pp; /* Pointer store. */ size_t *lenp; /* Length store. */ int *isemptyp; { recno_t l1; if (isemptyp != NULL) *isemptyp = 0; /* If the line exists, simply return it. */ if (!db_get(sp, lno, 0, pp, lenp)) return (0); /* * If the user asked for line 0 or line 1, i.e. the only possible * line in an empty file, find the last line of the file; db_last * fails loudly. */ if ((lno == 0 || lno == 1) && db_last(sp, &l1)) return (1); /* If the file isn't empty, fail loudly. */ if (lno != 0 && lno != 1 || l1 != 0) { db_err(sp, lno); return (1); } if (isemptyp != NULL) *isemptyp = 1; return (1); } /* * db_get -- * Look in the text buffers for a line, followed by the cache, followed * by the database. * * PUBLIC: int db_get __P((SCR *, recno_t, u_int32_t, char **, size_t *)); */ int db_get(sp, lno, flags, pp, lenp) SCR *sp; recno_t lno; /* Line number. */ u_int32_t flags; char **pp; /* Pointer store. */ size_t *lenp; /* Length store. */ { DBT data, key; EXF *ep; TEXT *tp; recno_t l1, l2; /* * The underlying recno stuff handles zero by returning NULL, but * have to have an OOB condition for the look-aside into the input * buffer anyway. */ if (lno == 0) goto err1; /* Check for no underlying file. */ if ((ep = sp->ep) == NULL) { ex_emsg(sp, NULL, EXM_NOFILEYET); goto err3; } if (LF_ISSET(DBG_NOCACHE)) goto nocache; /* * Look-aside into the TEXT buffers and see if the line we want * is there. */ if (F_ISSET(sp, SC_TINPUT)) { l1 = ((TEXT *)sp->tiq.cqh_first)->lno; l2 = ((TEXT *)sp->tiq.cqh_last)->lno; if (l1 <= lno && l2 >= lno) { #if defined(DEBUG) && 0 TRACE(sp, "retrieve TEXT buffer line %lu\n", (u_long)lno); #endif for (tp = sp->tiq.cqh_first; tp->lno != lno; tp = tp->q.cqe_next); if (lenp != NULL) *lenp = tp->len; if (pp != NULL) *pp = tp->lb; return (0); } /* * Adjust the line number for the number of lines used * by the text input buffers. */ if (lno > l2) lno -= l2 - l1; } /* Look-aside into the cache, and see if the line we want is there. */ if (lno == ep->c_lno) { #if defined(DEBUG) && 0 TRACE(sp, "retrieve cached line %lu\n", (u_long)lno); #endif if (lenp != NULL) *lenp = ep->c_len; if (pp != NULL) *pp = ep->c_lp; return (0); } ep->c_lno = OOBLNO; nocache: /* Get the line from the underlying database. */ key.data = &lno; key.size = sizeof(lno); switch (ep->db->get(ep->db, &key, &data, 0)) { case -1: goto err2; case 1: err1: if (LF_ISSET(DBG_FATAL)) err2: db_err(sp, lno); err3: if (lenp != NULL) *lenp = 0; if (pp != NULL) *pp = NULL; return (1); } /* Reset the cache. */ ep->c_lno = lno; ep->c_len = data.size; ep->c_lp = data.data; #if defined(DEBUG) && 0 TRACE(sp, "retrieve DB line %lu\n", (u_long)lno); #endif if (lenp != NULL) *lenp = data.size; if (pp != NULL) *pp = ep->c_lp; return (0); } /* * db_delete -- * Delete a line from the file. * * PUBLIC: int db_delete __P((SCR *, recno_t)); */ int db_delete(sp, lno) SCR *sp; recno_t lno; { DBT key; EXF *ep; #if defined(DEBUG) && 0 TRACE(sp, "delete line %lu\n", (u_long)lno); #endif /* Check for no underlying file. */ if ((ep = sp->ep) == NULL) { ex_emsg(sp, NULL, EXM_NOFILEYET); return (1); } /* Update marks, @ and global commands. */ if (mark_insdel(sp, LINE_DELETE, lno)) return (1); if (ex_g_insdel(sp, LINE_DELETE, lno)) return (1); /* Log change. */ log_line(sp, lno, LOG_LINE_DELETE); /* Update file. */ key.data = &lno; key.size = sizeof(lno); SIGBLOCK; if (ep->db->del(ep->db, &key, 0) == 1) { msgq(sp, M_SYSERR, "003|unable to delete line %lu", (u_long)lno); return (1); } SIGUNBLOCK; /* Flush the cache, update line count, before screen update. */ if (lno <= ep->c_lno) ep->c_lno = OOBLNO; if (ep->c_nlines != OOBLNO) --ep->c_nlines; /* File now modified. */ if (F_ISSET(ep, F_FIRSTMODIFY)) (void)rcv_init(sp); F_SET(ep, F_MODIFIED); /* Update screen. */ return (scr_update(sp, lno, LINE_DELETE, 1)); } /* * db_append -- * Append a line into the file. * * PUBLIC: int db_append __P((SCR *, int, recno_t, char *, size_t)); */ int db_append(sp, update, lno, p, len) SCR *sp; int update; recno_t lno; char *p; size_t len; { DBT data, key; EXF *ep; int rval; #if defined(DEBUG) && 0 TRACE(sp, "append to %lu: len %u {%.*s}\n", lno, len, MIN(len, 20), p); #endif /* Check for no underlying file. */ if ((ep = sp->ep) == NULL) { ex_emsg(sp, NULL, EXM_NOFILEYET); return (1); } /* Update file. */ key.data = &lno; key.size = sizeof(lno); data.data = p; data.size = len; SIGBLOCK; if (ep->db->put(ep->db, &key, &data, R_IAFTER) == -1) { msgq(sp, M_SYSERR, "004|unable to append to line %lu", (u_long)lno); return (1); } SIGUNBLOCK; /* Flush the cache, update line count, before screen update. */ if (lno < ep->c_lno) ep->c_lno = OOBLNO; if (ep->c_nlines != OOBLNO) ++ep->c_nlines; /* File now dirty. */ if (F_ISSET(ep, F_FIRSTMODIFY)) (void)rcv_init(sp); F_SET(ep, F_MODIFIED); /* Log change. */ log_line(sp, lno + 1, LOG_LINE_APPEND); /* Update marks, @ and global commands. */ rval = 0; if (mark_insdel(sp, LINE_INSERT, lno + 1)) rval = 1; if (ex_g_insdel(sp, LINE_INSERT, lno + 1)) rval = 1; /* * Update screen. * * XXX * Nasty hack. If multiple lines are input by the user, they aren't * committed until an is entered. The problem is the screen was * updated/scrolled as each line was entered. So, when this routine * is called to copy the new lines from the cut buffer into the file, * it has to know not to update the screen again. */ return (scr_update(sp, lno, LINE_APPEND, update) || rval); } /* * db_insert -- * Insert a line into the file. * * PUBLIC: int db_insert __P((SCR *, recno_t, char *, size_t)); */ int db_insert(sp, lno, p, len) SCR *sp; recno_t lno; char *p; size_t len; { DBT data, key; EXF *ep; int rval; #if defined(DEBUG) && 0 TRACE(sp, "insert before %lu: len %lu {%.*s}\n", (u_long)lno, (u_long)len, MIN(len, 20), p); #endif /* Check for no underlying file. */ if ((ep = sp->ep) == NULL) { ex_emsg(sp, NULL, EXM_NOFILEYET); return (1); } /* Update file. */ key.data = &lno; key.size = sizeof(lno); data.data = p; data.size = len; SIGBLOCK; if (ep->db->put(ep->db, &key, &data, R_IBEFORE) == -1) { msgq(sp, M_SYSERR, "005|unable to insert at line %lu", (u_long)lno); return (1); } SIGUNBLOCK; /* Flush the cache, update line count, before screen update. */ if (lno >= ep->c_lno) ep->c_lno = OOBLNO; if (ep->c_nlines != OOBLNO) ++ep->c_nlines; /* File now dirty. */ if (F_ISSET(ep, F_FIRSTMODIFY)) (void)rcv_init(sp); F_SET(ep, F_MODIFIED); /* Log change. */ log_line(sp, lno, LOG_LINE_INSERT); /* Update marks, @ and global commands. */ rval = 0; if (mark_insdel(sp, LINE_INSERT, lno)) rval = 1; if (ex_g_insdel(sp, LINE_INSERT, lno)) rval = 1; /* Update screen. */ return (scr_update(sp, lno, LINE_INSERT, 1) || rval); } /* * db_set -- * Store a line in the file. * * PUBLIC: int db_set __P((SCR *, recno_t, char *, size_t)); */ int db_set(sp, lno, p, len) SCR *sp; recno_t lno; char *p; size_t len; { DBT data, key; EXF *ep; #if defined(DEBUG) && 0 TRACE(sp, "replace line %lu: len %lu {%.*s}\n", (u_long)lno, (u_long)len, MIN(len, 20), p); #endif /* Check for no underlying file. */ if ((ep = sp->ep) == NULL) { ex_emsg(sp, NULL, EXM_NOFILEYET); return (1); } /* Log before change. */ log_line(sp, lno, LOG_LINE_RESET_B); /* Update file. */ key.data = &lno; key.size = sizeof(lno); data.data = p; data.size = len; SIGBLOCK; if (ep->db->put(ep->db, &key, &data, 0) == -1) { msgq(sp, M_SYSERR, "006|unable to store line %lu", (u_long)lno); return (1); } SIGUNBLOCK; /* Flush the cache, before logging or screen update. */ if (lno == ep->c_lno) ep->c_lno = OOBLNO; /* File now dirty. */ if (F_ISSET(ep, F_FIRSTMODIFY)) (void)rcv_init(sp); F_SET(ep, F_MODIFIED); /* Log after change. */ log_line(sp, lno, LOG_LINE_RESET_F); /* Update screen. */ return (scr_update(sp, lno, LINE_RESET, 1)); } /* * db_exist -- * Return if a line exists. * * PUBLIC: int db_exist __P((SCR *, recno_t)); */ int db_exist(sp, lno) SCR *sp; recno_t lno; { EXF *ep; /* Check for no underlying file. */ if ((ep = sp->ep) == NULL) { ex_emsg(sp, NULL, EXM_NOFILEYET); return (1); } if (lno == OOBLNO) return (0); /* * Check the last-line number cache. Adjust the cached line * number for the lines used by the text input buffers. */ if (ep->c_nlines != OOBLNO) return (lno <= (F_ISSET(sp, SC_TINPUT) ? ep->c_nlines + (((TEXT *)sp->tiq.cqh_last)->lno - ((TEXT *)sp->tiq.cqh_first)->lno) : ep->c_nlines)); /* Go get the line. */ return (!db_get(sp, lno, 0, NULL, NULL)); } /* * db_last -- * Return the number of lines in the file. * * PUBLIC: int db_last __P((SCR *, recno_t *)); */ int db_last(sp, lnop) SCR *sp; recno_t *lnop; { DBT data, key; EXF *ep; recno_t lno; /* Check for no underlying file. */ if ((ep = sp->ep) == NULL) { ex_emsg(sp, NULL, EXM_NOFILEYET); return (1); } /* * Check the last-line number cache. Adjust the cached line * number for the lines used by the text input buffers. */ if (ep->c_nlines != OOBLNO) { *lnop = ep->c_nlines; if (F_ISSET(sp, SC_TINPUT)) *lnop += ((TEXT *)sp->tiq.cqh_last)->lno - ((TEXT *)sp->tiq.cqh_first)->lno; return (0); } key.data = &lno; key.size = sizeof(lno); switch (ep->db->seq(ep->db, &key, &data, R_LAST)) { case -1: msgq(sp, M_SYSERR, "007|unable to get last line"); *lnop = 0; return (1); case 1: *lnop = 0; return (0); default: break; } /* Fill the cache. */ memcpy(&lno, key.data, sizeof(lno)); ep->c_nlines = ep->c_lno = lno; ep->c_len = data.size; ep->c_lp = data.data; /* Return the value. */ *lnop = (F_ISSET(sp, SC_TINPUT) && ((TEXT *)sp->tiq.cqh_last)->lno > lno ? ((TEXT *)sp->tiq.cqh_last)->lno : lno); return (0); } /* * db_err -- * Report a line error. * * PUBLIC: void db_err __P((SCR *, recno_t)); */ void db_err(sp, lno) SCR *sp; recno_t lno; { msgq(sp, M_ERR, "008|Error: unable to retrieve line %lu", (u_long)lno); } /* * scr_update -- * Update all of the screens that are backed by the file that * just changed. */ static int scr_update(sp, lno, op, current) SCR *sp; recno_t lno; lnop_t op; int current; { EXF *ep; SCR *tsp; if (F_ISSET(sp, SC_EX)) return (0); ep = sp->ep; if (ep->refcnt != 1) for (tsp = sp->gp->dq.cqh_first; tsp != (void *)&sp->gp->dq; tsp = tsp->q.cqe_next) if (sp != tsp && tsp->ep == ep) if (vs_change(tsp, lno, op)) return (1); return (current ? vs_change(sp, lno, op) : 0); } vigor-0.016.orig/common/log.c0100644000076400007640000003777307103707215014526 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)log.c 10.8 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "common.h" /* * The log consists of records, each containing a type byte and a variable * length byte string, as follows: * * LOG_CURSOR_INIT MARK * LOG_CURSOR_END MARK * LOG_LINE_APPEND recno_t char * * LOG_LINE_DELETE recno_t char * * LOG_LINE_INSERT recno_t char * * LOG_LINE_RESET_F recno_t char * * LOG_LINE_RESET_B recno_t char * * LOG_MARK LMARK * * We do before image physical logging. This means that the editor layer * MAY NOT modify records in place, even if simply deleting or overwriting * characters. Since the smallest unit of logging is a line, we're using * up lots of space. This may eventually have to be reduced, probably by * doing logical logging, which is a much cooler database phrase. * * The implementation of the historic vi 'u' command, using roll-forward and * roll-back, is simple. Each set of changes has a LOG_CURSOR_INIT record, * followed by a number of other records, followed by a LOG_CURSOR_END record. * LOG_LINE_RESET records come in pairs. The first is a LOG_LINE_RESET_B * record, and is the line before the change. The second is LOG_LINE_RESET_F, * and is the line after the change. Roll-back is done by backing up to the * first LOG_CURSOR_INIT record before a change. Roll-forward is done in a * similar fashion. * * The 'U' command is implemented by rolling backward to a LOG_CURSOR_END * record for a line different from the current one. It should be noted that * this means that a subsequent 'u' command will make a change based on the * new position of the log's cursor. This is okay, and, in fact, historic vi * behaved that way. */ static int log_cursor1 __P((SCR *, int)); static void log_err __P((SCR *, char *, int)); #if defined(DEBUG) && 0 static void log_trace __P((SCR *, char *, recno_t, u_char *)); #endif /* Try and restart the log on failure, i.e. if we run out of memory. */ #define LOG_ERR { \ log_err(sp, __FILE__, __LINE__); \ return (1); \ } /* * log_init -- * Initialize the logging subsystem. * * PUBLIC: int log_init __P((SCR *, EXF *)); */ int log_init(sp, ep) SCR *sp; EXF *ep; { /* * !!! * ep MAY NOT BE THE SAME AS sp->ep, DON'T USE THE LATTER. * * Initialize the buffer. The logging subsystem has its own * buffers because the global ones are almost by definition * going to be in use when the log runs. */ ep->l_lp = NULL; ep->l_len = 0; ep->l_cursor.lno = 1; /* XXX Any valid recno. */ ep->l_cursor.cno = 0; ep->l_high = ep->l_cur = 1; ep->log = dbopen(NULL, O_CREAT | O_NONBLOCK | O_RDWR, S_IRUSR | S_IWUSR, DB_RECNO, NULL); if (ep->log == NULL) { msgq(sp, M_SYSERR, "009|Log file"); F_SET(ep, F_NOLOG); return (1); } return (0); } /* * log_end -- * Close the logging subsystem. * * PUBLIC: int log_end __P((SCR *, EXF *)); */ int log_end(sp, ep) SCR *sp; EXF *ep; { /* * !!! * ep MAY NOT BE THE SAME AS sp->ep, DON'T USE THE LATTER. */ if (ep->log != NULL) { (void)(ep->log->close)(ep->log); ep->log = NULL; } if (ep->l_lp != NULL) { free(ep->l_lp); ep->l_lp = NULL; } ep->l_len = 0; ep->l_cursor.lno = 1; /* XXX Any valid recno. */ ep->l_cursor.cno = 0; ep->l_high = ep->l_cur = 1; return (0); } /* * log_cursor -- * Log the current cursor position, starting an event. * * PUBLIC: int log_cursor __P((SCR *)); */ int log_cursor(sp) SCR *sp; { EXF *ep; ep = sp->ep; if (F_ISSET(ep, F_NOLOG)) return (0); /* * If any changes were made since the last cursor init, * put out the ending cursor record. */ if (ep->l_cursor.lno == OOBLNO) { ep->l_cursor.lno = sp->lno; ep->l_cursor.cno = sp->cno; return (log_cursor1(sp, LOG_CURSOR_END)); } ep->l_cursor.lno = sp->lno; ep->l_cursor.cno = sp->cno; return (0); } /* * log_cursor1 -- * Actually push a cursor record out. */ static int log_cursor1(sp, type) SCR *sp; int type; { DBT data, key; EXF *ep; ep = sp->ep; BINC_RET(sp, ep->l_lp, ep->l_len, sizeof(u_char) + sizeof(MARK)); ep->l_lp[0] = type; memmove(ep->l_lp + sizeof(u_char), &ep->l_cursor, sizeof(MARK)); key.data = &ep->l_cur; key.size = sizeof(recno_t); data.data = ep->l_lp; data.size = sizeof(u_char) + sizeof(MARK); if (ep->log->put(ep->log, &key, &data, 0) == -1) LOG_ERR; #if defined(DEBUG) && 0 TRACE(sp, "%lu: %s: %u/%u\n", ep->l_cur, type == LOG_CURSOR_INIT ? "log_cursor_init" : "log_cursor_end", sp->lno, sp->cno); #endif /* Reset high water mark. */ ep->l_high = ++ep->l_cur; return (0); } /* * log_line -- * Log a line change. * * PUBLIC: int log_line __P((SCR *, recno_t, u_int)); */ int log_line(sp, lno, action) SCR *sp; recno_t lno; u_int action; { DBT data, key; EXF *ep; size_t len; char *lp; ep = sp->ep; if (F_ISSET(ep, F_NOLOG)) return (0); /* * XXX * * Kluge for vi. Clear the EXF undo flag so that the * next 'u' command does a roll-back, regardless. */ F_CLR(ep, F_UNDO); /* Put out one initial cursor record per set of changes. */ if (ep->l_cursor.lno != OOBLNO) { if (log_cursor1(sp, LOG_CURSOR_INIT)) return (1); ep->l_cursor.lno = OOBLNO; } /* * Put out the changes. If it's a LOG_LINE_RESET_B call, it's a * special case, avoid the caches. Also, if it fails and it's * line 1, it just means that the user started with an empty file, * so fake an empty length line. */ if (action == LOG_LINE_RESET_B) { if (db_get(sp, lno, DBG_NOCACHE, &lp, &len)) { if (lno != 1) { db_err(sp, lno); return (1); } len = 0; lp = ""; } } else if (db_get(sp, lno, DBG_FATAL, &lp, &len)) return (1); BINC_RET(sp, ep->l_lp, ep->l_len, len + sizeof(u_char) + sizeof(recno_t)); ep->l_lp[0] = action; memmove(ep->l_lp + sizeof(u_char), &lno, sizeof(recno_t)); memmove(ep->l_lp + sizeof(u_char) + sizeof(recno_t), lp, len); key.data = &ep->l_cur; key.size = sizeof(recno_t); data.data = ep->l_lp; data.size = len + sizeof(u_char) + sizeof(recno_t); if (ep->log->put(ep->log, &key, &data, 0) == -1) LOG_ERR; #if defined(DEBUG) && 0 switch (action) { case LOG_LINE_APPEND: TRACE(sp, "%u: log_line: append: %lu {%u}\n", ep->l_cur, lno, len); break; case LOG_LINE_DELETE: TRACE(sp, "%lu: log_line: delete: %lu {%u}\n", ep->l_cur, lno, len); break; case LOG_LINE_INSERT: TRACE(sp, "%lu: log_line: insert: %lu {%u}\n", ep->l_cur, lno, len); break; case LOG_LINE_RESET_F: TRACE(sp, "%lu: log_line: reset_f: %lu {%u}\n", ep->l_cur, lno, len); break; case LOG_LINE_RESET_B: TRACE(sp, "%lu: log_line: reset_b: %lu {%u}\n", ep->l_cur, lno, len); break; } #endif /* Reset high water mark. */ ep->l_high = ++ep->l_cur; return (0); } /* * log_mark -- * Log a mark position. For the log to work, we assume that there * aren't any operations that just put out a log record -- this * would mean that undo operations would only reset marks, and not * cause any other change. * * PUBLIC: int log_mark __P((SCR *, LMARK *)); */ int log_mark(sp, lmp) SCR *sp; LMARK *lmp; { DBT data, key; EXF *ep; ep = sp->ep; if (F_ISSET(ep, F_NOLOG)) return (0); /* Put out one initial cursor record per set of changes. */ if (ep->l_cursor.lno != OOBLNO) { if (log_cursor1(sp, LOG_CURSOR_INIT)) return (1); ep->l_cursor.lno = OOBLNO; } BINC_RET(sp, ep->l_lp, ep->l_len, sizeof(u_char) + sizeof(LMARK)); ep->l_lp[0] = LOG_MARK; memmove(ep->l_lp + sizeof(u_char), lmp, sizeof(LMARK)); key.data = &ep->l_cur; key.size = sizeof(recno_t); data.data = ep->l_lp; data.size = sizeof(u_char) + sizeof(LMARK); if (ep->log->put(ep->log, &key, &data, 0) == -1) LOG_ERR; #if defined(DEBUG) && 0 TRACE(sp, "%lu: mark %c: %lu/%u\n", ep->l_cur, lmp->name, lmp->lno, lmp->cno); #endif /* Reset high water mark. */ ep->l_high = ++ep->l_cur; return (0); } /* * Log_backward -- * Roll the log backward one operation. * * PUBLIC: int log_backward __P((SCR *, MARK *)); */ int log_backward(sp, rp) SCR *sp; MARK *rp; { DBT key, data; EXF *ep; LMARK lm; MARK m; recno_t lno; int didop; u_char *p; ep = sp->ep; if (F_ISSET(ep, F_NOLOG)) { msgq(sp, M_ERR, "010|Logging not being performed, undo not possible"); return (1); } if (ep->l_cur == 1) { msgq(sp, M_BERR, "011|No changes to undo"); return (1); } F_SET(ep, F_NOLOG); /* Turn off logging. */ key.data = &ep->l_cur; /* Initialize db request. */ key.size = sizeof(recno_t); for (didop = 0;;) { --ep->l_cur; if (ep->log->get(ep->log, &key, &data, 0)) LOG_ERR; #if defined(DEBUG) && 0 log_trace(sp, "log_backward", ep->l_cur, data.data); #endif switch (*(p = (u_char *)data.data)) { case LOG_CURSOR_INIT: if (didop) { memmove(rp, p + sizeof(u_char), sizeof(MARK)); F_CLR(ep, F_NOLOG); return (0); } break; case LOG_CURSOR_END: break; case LOG_LINE_APPEND: case LOG_LINE_INSERT: didop = 1; memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); if (db_delete(sp, lno)) goto err; ++sp->rptlines[L_DELETED]; break; case LOG_LINE_DELETE: didop = 1; memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); if (db_insert(sp, lno, p + sizeof(u_char) + sizeof(recno_t), data.size - sizeof(u_char) - sizeof(recno_t))) goto err; ++sp->rptlines[L_ADDED]; break; case LOG_LINE_RESET_F: break; case LOG_LINE_RESET_B: didop = 1; memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); if (db_set(sp, lno, p + sizeof(u_char) + sizeof(recno_t), data.size - sizeof(u_char) - sizeof(recno_t))) goto err; if (sp->rptlchange != lno) { sp->rptlchange = lno; ++sp->rptlines[L_CHANGED]; } break; case LOG_MARK: didop = 1; memmove(&lm, p + sizeof(u_char), sizeof(LMARK)); m.lno = lm.lno; m.cno = lm.cno; if (mark_set(sp, lm.name, &m, 0)) goto err; break; default: abort(); } } err: F_CLR(ep, F_NOLOG); return (1); } /* * Log_setline -- * Reset the line to its original appearance. * * XXX * There's a bug in this code due to our not logging cursor movements * unless a change was made. If you do a change, move off the line, * then move back on and do a 'U', the line will be restored to the way * it was before the original change. * * PUBLIC: int log_setline __P((SCR *)); */ int log_setline(sp) SCR *sp; { DBT key, data; EXF *ep; LMARK lm; MARK m; recno_t lno; u_char *p; ep = sp->ep; if (F_ISSET(ep, F_NOLOG)) { msgq(sp, M_ERR, "012|Logging not being performed, undo not possible"); return (1); } if (ep->l_cur == 1) return (1); F_SET(ep, F_NOLOG); /* Turn off logging. */ key.data = &ep->l_cur; /* Initialize db request. */ key.size = sizeof(recno_t); for (;;) { --ep->l_cur; if (ep->log->get(ep->log, &key, &data, 0)) LOG_ERR; #if defined(DEBUG) && 0 log_trace(sp, "log_setline", ep->l_cur, data.data); #endif switch (*(p = (u_char *)data.data)) { case LOG_CURSOR_INIT: memmove(&m, p + sizeof(u_char), sizeof(MARK)); if (m.lno != sp->lno || ep->l_cur == 1) { F_CLR(ep, F_NOLOG); return (0); } break; case LOG_CURSOR_END: memmove(&m, p + sizeof(u_char), sizeof(MARK)); if (m.lno != sp->lno) { ++ep->l_cur; F_CLR(ep, F_NOLOG); return (0); } break; case LOG_LINE_APPEND: case LOG_LINE_INSERT: case LOG_LINE_DELETE: case LOG_LINE_RESET_F: break; case LOG_LINE_RESET_B: memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); if (lno == sp->lno && db_set(sp, lno, p + sizeof(u_char) + sizeof(recno_t), data.size - sizeof(u_char) - sizeof(recno_t))) goto err; if (sp->rptlchange != lno) { sp->rptlchange = lno; ++sp->rptlines[L_CHANGED]; } case LOG_MARK: memmove(&lm, p + sizeof(u_char), sizeof(LMARK)); m.lno = lm.lno; m.cno = lm.cno; if (mark_set(sp, lm.name, &m, 0)) goto err; break; default: abort(); } } err: F_CLR(ep, F_NOLOG); return (1); } /* * Log_forward -- * Roll the log forward one operation. * * PUBLIC: int log_forward __P((SCR *, MARK *)); */ int log_forward(sp, rp) SCR *sp; MARK *rp; { DBT key, data; EXF *ep; LMARK lm; MARK m; recno_t lno; int didop; u_char *p; ep = sp->ep; if (F_ISSET(ep, F_NOLOG)) { msgq(sp, M_ERR, "013|Logging not being performed, roll-forward not possible"); return (1); } if (ep->l_cur == ep->l_high) { msgq(sp, M_BERR, "014|No changes to re-do"); return (1); } F_SET(ep, F_NOLOG); /* Turn off logging. */ key.data = &ep->l_cur; /* Initialize db request. */ key.size = sizeof(recno_t); for (didop = 0;;) { ++ep->l_cur; if (ep->log->get(ep->log, &key, &data, 0)) LOG_ERR; #if defined(DEBUG) && 0 log_trace(sp, "log_forward", ep->l_cur, data.data); #endif switch (*(p = (u_char *)data.data)) { case LOG_CURSOR_END: if (didop) { ++ep->l_cur; memmove(rp, p + sizeof(u_char), sizeof(MARK)); F_CLR(ep, F_NOLOG); return (0); } break; case LOG_CURSOR_INIT: break; case LOG_LINE_APPEND: case LOG_LINE_INSERT: didop = 1; memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); if (db_insert(sp, lno, p + sizeof(u_char) + sizeof(recno_t), data.size - sizeof(u_char) - sizeof(recno_t))) goto err; ++sp->rptlines[L_ADDED]; break; case LOG_LINE_DELETE: didop = 1; memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); if (db_delete(sp, lno)) goto err; ++sp->rptlines[L_DELETED]; break; case LOG_LINE_RESET_B: break; case LOG_LINE_RESET_F: didop = 1; memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); if (db_set(sp, lno, p + sizeof(u_char) + sizeof(recno_t), data.size - sizeof(u_char) - sizeof(recno_t))) goto err; if (sp->rptlchange != lno) { sp->rptlchange = lno; ++sp->rptlines[L_CHANGED]; } break; case LOG_MARK: didop = 1; memmove(&lm, p + sizeof(u_char), sizeof(LMARK)); m.lno = lm.lno; m.cno = lm.cno; if (mark_set(sp, lm.name, &m, 0)) goto err; break; default: abort(); } } err: F_CLR(ep, F_NOLOG); return (1); } /* * log_err -- * Try and restart the log on failure, i.e. if we run out of memory. */ static void log_err(sp, file, line) SCR *sp; char *file; int line; { EXF *ep; msgq(sp, M_SYSERR, "015|%s/%d: log put error", tail(file), line); ep = sp->ep; (void)ep->log->close(ep->log); if (!log_init(sp, ep)) msgq(sp, M_ERR, "267|Log restarted"); } #if defined(DEBUG) && 0 static void log_trace(sp, msg, rno, p) SCR *sp; char *msg; recno_t rno; u_char *p; { LMARK lm; MARK m; recno_t lno; switch (*p) { case LOG_CURSOR_INIT: memmove(&m, p + sizeof(u_char), sizeof(MARK)); TRACE(sp, "%lu: %s: C_INIT: %u/%u\n", rno, msg, m.lno, m.cno); break; case LOG_CURSOR_END: memmove(&m, p + sizeof(u_char), sizeof(MARK)); TRACE(sp, "%lu: %s: C_END: %u/%u\n", rno, msg, m.lno, m.cno); break; case LOG_LINE_APPEND: memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); TRACE(sp, "%lu: %s: APPEND: %lu\n", rno, msg, lno); break; case LOG_LINE_INSERT: memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); TRACE(sp, "%lu: %s: INSERT: %lu\n", rno, msg, lno); break; case LOG_LINE_DELETE: memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); TRACE(sp, "%lu: %s: DELETE: %lu\n", rno, msg, lno); break; case LOG_LINE_RESET_F: memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); TRACE(sp, "%lu: %s: RESET_F: %lu\n", rno, msg, lno); break; case LOG_LINE_RESET_B: memmove(&lno, p + sizeof(u_char), sizeof(recno_t)); TRACE(sp, "%lu: %s: RESET_B: %lu\n", rno, msg, lno); break; case LOG_MARK: memmove(&lm, p + sizeof(u_char), sizeof(LMARK)); TRACE(sp, "%lu: %s: MARK: %u/%u\n", rno, msg, lm.lno, lm.cno); break; default: abort(); } } #endif vigor-0.016.orig/common/log.h0100644000076400007640000000101607103707215014510 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)log.h 10.2 (Berkeley) 3/6/96 */ #define LOG_NOTYPE 0 #define LOG_CURSOR_INIT 1 #define LOG_CURSOR_END 2 #define LOG_LINE_APPEND 3 #define LOG_LINE_DELETE 4 #define LOG_LINE_INSERT 5 #define LOG_LINE_RESET_F 6 #define LOG_LINE_RESET_B 7 #define LOG_MARK 8 vigor-0.016.orig/common/main.c0100644000076400007640000003431307103707215014654 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char copyright[] = "@(#) Copyright (c) 1992, 1993, 1994\n\ The Regents of the University of California. All rights reserved.\n\ @(#) Copyright (c) 1992, 1993, 1994, 1995, 1996\n\ Keith Bostic. All rights reserved.\n"; #endif /* not lint */ #ifndef lint static const char sccsid[] = "@(#)main.c 10.48 (Berkeley) 10/11/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "../vi/vi.h" #include "pathnames.h" static void attach __P((GS *)); static void v_estr __P((char *, int, char *)); static int v_obsolete __P((char *, char *[])); /* * editor -- * Main editor routine. * * PUBLIC: int editor __P((GS *, int, char *[])); */ int editor(gp, argc, argv) GS *gp; int argc; char *argv[]; { extern int optind; extern char *optarg; const char *p; EVENT ev; FREF *frp; SCR *sp; size_t len; u_int flags; int ch, flagchk, lflag, secure, startup, readonly, rval, silent; char *tag_f, *wsizearg, path[256]; /* Initialize the busy routine, if not defined by the screen. */ if (gp->scr_busy == NULL) gp->scr_busy = vs_busy; /* Initialize the message routine, if not defined by the screen. */ if (gp->scr_msg == NULL) gp->scr_msg = vs_msg; /* Common global structure initialization. */ CIRCLEQ_INIT(&gp->dq); CIRCLEQ_INIT(&gp->hq); LIST_INIT(&gp->ecq); LIST_INSERT_HEAD(&gp->ecq, &gp->excmd, q); gp->noprint = DEFAULT_NOPRINT; /* Structures shared by screens so stored in the GS structure. */ CIRCLEQ_INIT(&gp->frefq); CIRCLEQ_INIT(&gp->dcb_store.textq); LIST_INIT(&gp->cutq); LIST_INIT(&gp->seqq); /* Set initial screen type and mode based on the program name. */ readonly = 0; if (!strcmp(gp->progname, "ex") || !strcmp(gp->progname, "nex")) LF_INIT(SC_EX); else { /* Nview, view are readonly. */ if (!strcmp(gp->progname, "nview") || !strcmp(gp->progname, "view")) readonly = 1; /* Vi is the default. */ LF_INIT(SC_VI); } /* Convert old-style arguments into new-style ones. */ if (v_obsolete(gp->progname, argv)) return (1); /* Parse the arguments. */ flagchk = '\0'; tag_f = wsizearg = NULL; lflag = secure = silent = 0; startup = 1; /* Set the file snapshot flag. */ F_SET(gp, G_SNAPSHOT); #ifdef DEBUG while ((ch = getopt(argc, argv, "c:D:eFlRrSsT:t:vw:")) != EOF) #else while ((ch = getopt(argc, argv, "c:eFlRrSst:vw:")) != EOF) #endif switch (ch) { case 'c': /* Run the command. */ /* * XXX * We should support multiple -c options. */ if (gp->c_option != NULL) { v_estr(gp->progname, 0, "only one -c command may be specified."); return (1); } gp->c_option = optarg; break; #ifdef DEBUG case 'D': switch (optarg[0]) { case 's': startup = 0; break; case 'w': attach(gp); break; default: v_estr(gp->progname, 0, "usage: -D requires s or w argument."); return (1); } break; #endif case 'e': /* Ex mode. */ LF_CLR(SC_VI); LF_SET(SC_EX); break; case 'F': /* No snapshot. */ F_CLR(gp, G_SNAPSHOT); break; case 'l': /* Set lisp, showmatch options. */ lflag = 1; break; case 'R': /* Readonly. */ readonly = 1; break; case 'r': /* Recover. */ if (flagchk == 't') { v_estr(gp->progname, 0, "only one of -r and -t may be specified."); return (1); } flagchk = 'r'; break; case 'S': secure = 1; break; case 's': silent = 1; break; #ifdef DEBUG case 'T': /* Trace. */ if ((gp->tracefp = fopen(optarg, "w")) == NULL) { v_estr(gp->progname, errno, optarg); goto err; } (void)fprintf(gp->tracefp, "\n===\ntrace: open %s\n", optarg); break; #endif case 't': /* Tag. */ if (flagchk == 'r') { v_estr(gp->progname, 0, "only one of -r and -t may be specified."); return (1); } if (flagchk == 't') { v_estr(gp->progname, 0, "only one tag file may be specified."); return (1); } flagchk = 't'; tag_f = optarg; break; case 'v': /* Vi mode. */ LF_CLR(SC_EX); LF_SET(SC_VI); break; case 'w': wsizearg = optarg; break; case '?': default: (void)gp->scr_usage(); return (1); } argc -= optind; argv += optind; /* * -s option is only meaningful to ex. * * If not reading from a terminal, it's like -s was specified. */ if (silent && !LF_ISSET(SC_EX)) { v_estr(gp->progname, 0, "-s option is only applicable to ex."); goto err; } if (LF_ISSET(SC_EX) && F_ISSET(gp, G_SCRIPTED)) silent = 1; /* * Build and initialize the first/current screen. This is a bit * tricky. If an error is returned, we may or may not have a * screen structure. If we have a screen structure, put it on a * display queue so that the error messages get displayed. * * !!! * Everything we do until we go interactive is done in ex mode. */ if (screen_init(gp, NULL, &sp)) { if (sp != NULL) CIRCLEQ_INSERT_HEAD(&gp->dq, sp, q); goto err; } F_SET(sp, SC_EX); CIRCLEQ_INSERT_HEAD(&gp->dq, sp, q); if (v_key_init(sp)) /* Special key initialization. */ goto err; { int oargs[5], *oargp = oargs; if (lflag) { /* Command-line options. */ *oargp++ = O_LISP; *oargp++ = O_SHOWMATCH; } if (readonly) *oargp++ = O_READONLY; if (secure) *oargp++ = O_SECURE; *oargp = -1; /* Options initialization. */ if (opts_init(sp, oargs)) goto err; } if (wsizearg != NULL) { ARGS *av[2], a, b; (void)snprintf(path, sizeof(path), "window=%s", wsizearg); a.bp = (CHAR_T *)path; a.len = strlen(path); b.bp = NULL; b.len = 0; av[0] = &a; av[1] = &b; (void)opts_set(sp, av, NULL); } if (silent) { /* Ex batch mode option values. */ O_CLR(sp, O_AUTOPRINT); O_CLR(sp, O_PROMPT); O_CLR(sp, O_VERBOSE); O_CLR(sp, O_WARN); F_SET(sp, SC_EX_SILENT); } sp->rows = O_VAL(sp, O_LINES); /* Make ex formatting work. */ sp->cols = O_VAL(sp, O_COLUMNS); if (!silent && startup) { /* Read EXINIT, exrc files. */ if (ex_exrc(sp)) goto err; if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) { if (screen_end(sp)) goto err; goto done; } } /* * List recovery files if -r specified without file arguments. * Note, options must be initialized and startup information * read before doing this. */ if (flagchk == 'r' && argv[0] == NULL) { if (rcv_list(sp)) goto err; if (screen_end(sp)) goto err; goto done; } /* * !!! * Initialize the default ^D, ^U scrolling value here, after the * user has had every opportunity to set the window option. * * It's historic practice that changing the value of the window * option did not alter the default scrolling value, only giving * a count to ^D/^U did that. */ sp->defscroll = (O_VAL(sp, O_WINDOW) + 1) / 2; /* * If we don't have a command-line option, switch into the right * editor now, so that we position default files correctly, and * so that any tags file file-already-locked messages are in the * vi screen, not the ex screen. * * XXX * If we have a command-line option, the error message can end * up in the wrong place, but I think that the combination is * unlikely. */ if (gp->c_option == NULL) { F_CLR(sp, SC_EX | SC_VI); F_SET(sp, LF_ISSET(SC_EX | SC_VI)); } /* Open a tag file if specified. */ if (tag_f != NULL && ex_tag_first(sp, tag_f)) goto err; /* * Append any remaining arguments as file names. Files are recovery * files if -r specified. If the tag option or ex startup commands * loaded a file, then any file arguments are going to come after it. */ if (*argv != NULL) { if (sp->frp != NULL) { /* Cheat -- we know we have an extra argv slot. */ MALLOC_NOMSG(sp, *--argv, char *, strlen(sp->frp->name) + 1); if (*argv == NULL) { v_estr(gp->progname, errno, NULL); goto err; } (void)strcpy(*argv, sp->frp->name); } sp->argv = sp->cargv = argv; F_SET(sp, SC_ARGNOFREE); if (flagchk == 'r') F_SET(sp, SC_ARGRECOVER); } /* * If the ex startup commands and or/the tag option haven't already * created a file, create one. If no command-line files were given, * use a temporary file. */ if (sp->frp == NULL) { if (sp->argv == NULL) { if ((frp = file_add(sp, NULL)) == NULL) goto err; } else { if ((frp = file_add(sp, (CHAR_T *)sp->argv[0])) == NULL) goto err; if (F_ISSET(sp, SC_ARGRECOVER)) F_SET(frp, FR_RECOVER); } if (file_init(sp, frp, NULL, 0)) goto err; if (EXCMD_RUNNING(gp)) { (void)ex_cmd(sp); if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) { if (screen_end(sp)) goto err; goto done; } } } /* * Check to see if we need to wait for ex. If SC_SCR_EX is set, ex * was forced to initialize the screen during startup. We'd like to * wait for a single character from the user, but we can't because * we're not in raw mode. We can't switch to raw mode because the * vi initialization will switch to xterm's alternate screen, causing * us to lose the messages we're pausing to make sure the user read. * So, wait for a complete line. */ if (F_ISSET(sp, SC_SCR_EX)) { p = msg_cmsg(sp, CMSG_CONT_R, &len); (void)write(STDOUT_FILENO, p, len); for (;;) { if (v_event_get(sp, &ev, 0, 0)) goto err; if (ev.e_event == E_INTERRUPT || ev.e_event == E_CHARACTER && (ev.e_value == K_CR || ev.e_value == K_NL)) break; (void)gp->scr_bell(sp); } } /* Switch into the right editor, regardless. */ F_CLR(sp, SC_EX | SC_VI); F_SET(sp, LF_ISSET(SC_EX | SC_VI) | SC_STATUS_CNT); /* * Main edit loop. Vi handles split screens itself, we only return * here when switching editor modes or restarting the screen. */ while (sp != NULL) if (F_ISSET(sp, SC_EX) ? ex(&sp) : vi(&sp)) goto err; done: rval = 0; if (0) err: rval = 1; /* Clean out the global structure. */ v_end(gp); return (rval); } /* * v_end -- * End the program, discarding screens and most of the global area. * * PUBLIC: void v_end __P((GS *)); */ void v_end(gp) GS *gp; { MSGS *mp; SCR *sp; /* If there are any remaining screens, kill them off. */ if (gp->ccl_sp != NULL) { (void)file_end(gp->ccl_sp, NULL, 1); (void)screen_end(gp->ccl_sp); } while ((sp = gp->dq.cqh_first) != (void *)&gp->dq) (void)screen_end(sp); while ((sp = gp->hq.cqh_first) != (void *)&gp->hq) (void)screen_end(sp); #ifdef HAVE_PERL_INTERP perl_end(gp); #endif #if defined(DEBUG) || defined(PURIFY) || defined(LIBRARY) { FREF *frp; /* Free FREF's. */ while ((frp = gp->frefq.cqh_first) != (FREF *)&gp->frefq) { CIRCLEQ_REMOVE(&gp->frefq, frp, q); if (frp->name != NULL) free(frp->name); if (frp->tname != NULL) free(frp->tname); free(frp); } } /* Free key input queue. */ if (gp->i_event != NULL) free(gp->i_event); /* Free cut buffers. */ cut_close(gp); /* Free map sequences. */ seq_close(gp); /* Free default buffer storage. */ (void)text_lfree(&gp->dcb_store.textq); /* Close message catalogs. */ msg_close(gp); #endif /* Ring the bell if scheduled. */ if (F_ISSET(gp, G_BELLSCHED)) (void)fprintf(stderr, "\07"); /* \a */ /* * Flush any remaining messages. If a message is here, it's almost * certainly the message about the event that killed us (although * it's possible that the user is sourcing a file that exits from the * editor). */ while ((mp = gp->msgq.lh_first) != NULL) { (void)fprintf(stderr, "%s%.*s", mp->mtype == M_ERR ? "ex/vi: " : "", (int)mp->len, mp->buf); LIST_REMOVE(mp, q); #if defined(DEBUG) || defined(PURIFY) || defined(LIBRARY) free(mp->buf); free(mp); #endif } #if defined(DEBUG) || defined(PURIFY) || defined(LIBRARY) /* Free any temporary space. */ if (gp->tmp_bp != NULL) free(gp->tmp_bp); #if defined(DEBUG) /* Close debugging file descriptor. */ if (gp->tracefp != NULL) (void)fclose(gp->tracefp); #endif #endif } /* * v_obsolete -- * Convert historic arguments into something getopt(3) will like. */ static int v_obsolete(name, argv) char *name, *argv[]; { size_t len; char *p; /* * Translate old style arguments into something getopt will like. * Make sure it's not text space memory, because ex modifies the * strings. * Change "+" into "-c$". * Change "+" into "-c". * Change "-" into "-s" * The c, T, t and w options take arguments so they can't be * special arguments. * * Stop if we find "--" as an argument, the user may want to edit * a file named "+foo". */ while (*++argv && strcmp(argv[0], "--")) if (argv[0][0] == '+') { if (argv[0][1] == '\0') { MALLOC_NOMSG(NULL, argv[0], char *, 4); if (argv[0] == NULL) goto nomem; (void)strcpy(argv[0], "-c$"); } else { p = argv[0]; len = strlen(argv[0]); MALLOC_NOMSG(NULL, argv[0], char *, len + 2); if (argv[0] == NULL) goto nomem; argv[0][0] = '-'; argv[0][1] = 'c'; (void)strcpy(argv[0] + 2, p + 1); } } else if (argv[0][0] == '-') if (argv[0][1] == '\0') { MALLOC_NOMSG(NULL, argv[0], char *, 3); if (argv[0] == NULL) { nomem: v_estr(name, errno, NULL); return (1); } (void)strcpy(argv[0], "-s"); } else if ((argv[0][1] == 'c' || argv[0][1] == 'T' || argv[0][1] == 't' || argv[0][1] == 'w') && argv[0][2] == '\0') ++argv; return (0); } #ifdef DEBUG static void attach(gp) GS *gp; { int fd; char ch; if ((fd = open(_PATH_TTY, O_RDONLY, 0)) < 0) { v_estr(gp->progname, errno, _PATH_TTY); return; } (void)printf("process %lu waiting, enter to continue: ", (u_long)getpid()); (void)fflush(stdout); do { if (read(fd, &ch, 1) != 1) { (void)close(fd); return; } } while (ch != '\n' && ch != '\r'); (void)close(fd); } #endif static void v_estr(name, eno, msg) char *name, *msg; int eno; { (void)fprintf(stderr, "%s", name); if (msg != NULL) (void)fprintf(stderr, ": %s", msg); if (eno) (void)fprintf(stderr, ": %s", strerror(errno)); (void)fprintf(stderr, "\n"); } vigor-0.016.orig/common/options.awk0100644000076400007640000000024607103707215015761 0ustar cjw44cjw44# @(#)options.awk 10.1 (Berkeley) 6/8/95 /^\/\* O_[0-9A-Z_]*/ { printf("#define %s %d\n", $2, cnt++); next; } END { printf("#define O_OPTIONCOUNT %d\n", cnt); } vigor-0.016.orig/common/mark.c0100644000076400007640000001522007103707215014656 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)mark.c 10.13 (Berkeley) 7/19/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "common.h" static LMARK *mark_find __P((SCR *, ARG_CHAR_T)); /* * Marks are maintained in a key sorted doubly linked list. We can't * use arrays because we have no idea how big an index key could be. * The underlying assumption is that users don't have more than, say, * 10 marks at any one time, so this will be is fast enough. * * Marks are fixed, and modifications to the line don't update the mark's * position in the line. This can be hard. If you add text to the line, * place a mark in that text, undo the addition and use ` to move to the * mark, the location will have disappeared. It's tempting to try to adjust * the mark with the changes in the line, but this is hard to do, especially * if we've given the line to v_ntext.c:v_ntext() for editing. Historic vi * would move to the first non-blank on the line when the mark location was * past the end of the line. This can be complicated by deleting to a mark * that has disappeared using the ` command. Historic vi treated this as * a line-mode motion and deleted the line. This implementation complains to * the user. * * In historic vi, marks returned if the operation was undone, unless the * mark had been subsequently reset. Tricky. This is hard to start with, * but in the presence of repeated undo it gets nasty. When a line is * deleted, we delete (and log) any marks on that line. An undo will create * the mark. Any mark creations are noted as to whether the user created * it or if it was created by an undo. The former cannot be reset by another * undo, but the latter may. * * All of these routines translate ABSMARK2 to ABSMARK1. Setting either of * the absolute mark locations sets both, so that "m'" and "m`" work like * they, ah, for lack of a better word, "should". */ /* * mark_init -- * Set up the marks. * * PUBLIC: int mark_init __P((SCR *, EXF *)); */ int mark_init(sp, ep) SCR *sp; EXF *ep; { /* * !!! * ep MAY NOT BE THE SAME AS sp->ep, DON'T USE THE LATTER. * * Set up the marks. */ LIST_INIT(&ep->marks); return (0); } /* * mark_end -- * Free up the marks. * * PUBLIC: int mark_end __P((SCR *, EXF *)); */ int mark_end(sp, ep) SCR *sp; EXF *ep; { LMARK *lmp; /* * !!! * ep MAY NOT BE THE SAME AS sp->ep, DON'T USE THE LATTER. */ while ((lmp = ep->marks.lh_first) != NULL) { LIST_REMOVE(lmp, q); free(lmp); } return (0); } /* * mark_get -- * Get the location referenced by a mark. * * PUBLIC: int mark_get __P((SCR *, ARG_CHAR_T, MARK *, mtype_t)); */ int mark_get(sp, key, mp, mtype) SCR *sp; ARG_CHAR_T key; MARK *mp; mtype_t mtype; { LMARK *lmp; if (key == ABSMARK2) key = ABSMARK1; lmp = mark_find(sp, key); if (lmp == NULL || lmp->name != key) { msgq(sp, mtype, "017|Mark %s: not set", KEY_NAME(sp, key)); return (1); } if (F_ISSET(lmp, MARK_DELETED)) { msgq(sp, mtype, "018|Mark %s: the line was deleted", KEY_NAME(sp, key)); return (1); } /* * !!! * The absolute mark is initialized to lno 1/cno 0, and historically * you could use it in an empty file. Make such a mark always work. */ if ((lmp->lno != 1 || lmp->cno != 0) && !db_exist(sp, lmp->lno)) { msgq(sp, mtype, "019|Mark %s: cursor position no longer exists", KEY_NAME(sp, key)); return (1); } mp->lno = lmp->lno; mp->cno = lmp->cno; return (0); } /* * mark_set -- * Set the location referenced by a mark. * * PUBLIC: int mark_set __P((SCR *, ARG_CHAR_T, MARK *, int)); */ int mark_set(sp, key, value, userset) SCR *sp; ARG_CHAR_T key; MARK *value; int userset; { LMARK *lmp, *lmt; if (key == ABSMARK2) key = ABSMARK1; /* * The rules are simple. If the user is setting a mark (if it's a * new mark this is always true), it always happens. If not, it's * an undo, and we set it if it's not already set or if it was set * by a previous undo. */ lmp = mark_find(sp, key); if (lmp == NULL || lmp->name != key) { MALLOC_RET(sp, lmt, LMARK *, sizeof(LMARK)); if (lmp == NULL) { LIST_INSERT_HEAD(&sp->ep->marks, lmt, q); } else LIST_INSERT_AFTER(lmp, lmt, q); lmp = lmt; } else if (!userset && !F_ISSET(lmp, MARK_DELETED) && F_ISSET(lmp, MARK_USERSET)) return (0); lmp->lno = value->lno; lmp->cno = value->cno; lmp->name = key; lmp->flags = userset ? MARK_USERSET : 0; return (0); } /* * mark_find -- * Find the requested mark, or, the slot immediately before * where it would go. */ static LMARK * mark_find(sp, key) SCR *sp; ARG_CHAR_T key; { LMARK *lmp, *lastlmp; /* * Return the requested mark or the slot immediately before * where it should go. */ for (lastlmp = NULL, lmp = sp->ep->marks.lh_first; lmp != NULL; lastlmp = lmp, lmp = lmp->q.le_next) if (lmp->name >= key) return (lmp->name == key ? lmp : lastlmp); return (lastlmp); } /* * mark_insdel -- * Update the marks based on an insertion or deletion. * * PUBLIC: int mark_insdel __P((SCR *, lnop_t, recno_t)); */ int mark_insdel(sp, op, lno) SCR *sp; lnop_t op; recno_t lno; { LMARK *lmp; recno_t lline; switch (op) { case LINE_APPEND: /* All insert/append operations are done as inserts. */ abort(); case LINE_DELETE: for (lmp = sp->ep->marks.lh_first; lmp != NULL; lmp = lmp->q.le_next) if (lmp->lno >= lno) if (lmp->lno == lno) { F_SET(lmp, MARK_DELETED); (void)log_mark(sp, lmp); } else --lmp->lno; break; case LINE_INSERT: /* * XXX * Very nasty special case. If the file was empty, then we're * adding the first line, which is a replacement. So, we don't * modify the marks. This is a hack to make: * * mz:r!echo foo'z * * work, i.e. historically you could mark the "line" in an empty * file and replace it, and continue to use the mark. Insane, * well, yes, I know, but someone complained. * * Check for line #2 before going to the end of the file. */ if (!db_exist(sp, 2)) { if (db_last(sp, &lline)) return (1); if (lline == 1) return (0); } for (lmp = sp->ep->marks.lh_first; lmp != NULL; lmp = lmp->q.le_next) if (lmp->lno >= lno) ++lmp->lno; break; case LINE_RESET: break; } return (0); } vigor-0.016.orig/common/mark.h0100644000076400007640000000270207103707215014664 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)mark.h 10.3 (Berkeley) 3/6/96 */ /* * The MARK and LMARK structures define positions in the file. There are * two structures because the mark subroutines are the only places where * anything cares about something other than line and column. * * Because of the different interfaces used by the db(3) package, curses, * and users, the line number is 1 based and the column number is 0 based. * Additionally, it is known that the out-of-band line number is less than * any legal line number. The line number is of type recno_t, as that's * the underlying type of the database. The column number is of type size_t, * guaranteeing that we can malloc a line. */ struct _mark { #define OOBLNO 0 /* Out-of-band line number. */ recno_t lno; /* Line number. */ size_t cno; /* Column number. */ }; struct _lmark { LIST_ENTRY(_lmark) q; /* Linked list of marks. */ recno_t lno; /* Line number. */ size_t cno; /* Column number. */ CHAR_T name; /* Mark name. */ #define MARK_DELETED 0x01 /* Mark was deleted. */ #define MARK_USERSET 0x02 /* User set this mark. */ u_int8_t flags; }; #define ABSMARK1 '\'' /* Absolute mark name. */ #define ABSMARK2 '`' /* Absolute mark name. */ vigor-0.016.orig/common/mem.h0100644000076400007640000001175007103707215014513 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)mem.h 10.7 (Berkeley) 3/30/96 */ /* Increase the size of a malloc'd buffer. Two versions, one that * returns, one that jumps to an error label. */ #define BINC_GOTO(sp, lp, llen, nlen) { \ void *L__bincp; \ if ((nlen) > llen) { \ if ((L__bincp = binc(sp, lp, &(llen), nlen)) == NULL) \ goto alloc_err; \ /* \ * !!! \ * Possible pointer conversion. \ */ \ lp = L__bincp; \ } \ } #define BINC_RET(sp, lp, llen, nlen) { \ void *L__bincp; \ if ((nlen) > llen) { \ if ((L__bincp = binc(sp, lp, &(llen), nlen)) == NULL) \ return (1); \ /* \ * !!! \ * Possible pointer conversion. \ */ \ lp = L__bincp; \ } \ } /* * Get some temporary space, preferably from the global temporary buffer, * from a malloc'd buffer otherwise. Two versions, one that returns, one * that jumps to an error label. */ #define GET_SPACE_GOTO(sp, bp, blen, nlen) { \ GS *L__gp = (sp) == NULL ? NULL : (sp)->gp; \ if (L__gp == NULL || F_ISSET(L__gp, G_TMP_INUSE)) { \ bp = NULL; \ blen = 0; \ BINC_GOTO(sp, bp, blen, nlen); \ } else { \ BINC_GOTO(sp, L__gp->tmp_bp, L__gp->tmp_blen, nlen); \ bp = L__gp->tmp_bp; \ blen = L__gp->tmp_blen; \ F_SET(L__gp, G_TMP_INUSE); \ } \ } #define GET_SPACE_RET(sp, bp, blen, nlen) { \ GS *L__gp = (sp) == NULL ? NULL : (sp)->gp; \ if (L__gp == NULL || F_ISSET(L__gp, G_TMP_INUSE)) { \ bp = NULL; \ blen = 0; \ BINC_RET(sp, bp, blen, nlen); \ } else { \ BINC_RET(sp, L__gp->tmp_bp, L__gp->tmp_blen, nlen); \ bp = L__gp->tmp_bp; \ blen = L__gp->tmp_blen; \ F_SET(L__gp, G_TMP_INUSE); \ } \ } /* * Add space to a GET_SPACE returned buffer. Two versions, one that * returns, one that jumps to an error label. */ #define ADD_SPACE_GOTO(sp, bp, blen, nlen) { \ GS *L__gp = (sp) == NULL ? NULL : (sp)->gp; \ if (L__gp == NULL || bp == L__gp->tmp_bp) { \ F_CLR(L__gp, G_TMP_INUSE); \ BINC_GOTO(sp, L__gp->tmp_bp, L__gp->tmp_blen, nlen); \ bp = L__gp->tmp_bp; \ blen = L__gp->tmp_blen; \ F_SET(L__gp, G_TMP_INUSE); \ } else \ BINC_GOTO(sp, bp, blen, nlen); \ } #define ADD_SPACE_RET(sp, bp, blen, nlen) { \ GS *L__gp = (sp) == NULL ? NULL : (sp)->gp; \ if (L__gp == NULL || bp == L__gp->tmp_bp) { \ F_CLR(L__gp, G_TMP_INUSE); \ BINC_RET(sp, L__gp->tmp_bp, L__gp->tmp_blen, nlen); \ bp = L__gp->tmp_bp; \ blen = L__gp->tmp_blen; \ F_SET(L__gp, G_TMP_INUSE); \ } else \ BINC_RET(sp, bp, blen, nlen); \ } /* Free a GET_SPACE returned buffer. */ #define FREE_SPACE(sp, bp, blen) { \ GS *L__gp = (sp) == NULL ? NULL : (sp)->gp; \ if (L__gp != NULL && bp == L__gp->tmp_bp) \ F_CLR(L__gp, G_TMP_INUSE); \ else \ free(bp); \ } /* * Malloc a buffer, casting the return pointer. Various versions. * * !!! * The cast should be unnecessary, malloc(3) and friends return void *'s, * which is all we need. However, some systems that nvi needs to run on * don't do it right yet, resulting in the compiler printing out roughly * a million warnings. After awhile, it seemed easier to put the casts * in instead of explaining it all the time. */ #define CALLOC(sp, p, cast, nmemb, size) { \ if ((p = (cast)calloc(nmemb, size)) == NULL) \ msgq(sp, M_SYSERR, NULL); \ } #define CALLOC_GOTO(sp, p, cast, nmemb, size) { \ if ((p = (cast)calloc(nmemb, size)) == NULL) \ goto alloc_err; \ } #define CALLOC_NOMSG(sp, p, cast, nmemb, size) { \ p = (cast)calloc(nmemb, size); \ } #define CALLOC_RET(sp, p, cast, nmemb, size) { \ if ((p = (cast)calloc(nmemb, size)) == NULL) { \ msgq(sp, M_SYSERR, NULL); \ return (1); \ } \ } #define MALLOC(sp, p, cast, size) { \ if ((p = (cast)malloc(size)) == NULL) \ msgq(sp, M_SYSERR, NULL); \ } #define MALLOC_GOTO(sp, p, cast, size) { \ if ((p = (cast)malloc(size)) == NULL) \ goto alloc_err; \ } #define MALLOC_NOMSG(sp, p, cast, size) { \ p = (cast)malloc(size); \ } #define MALLOC_RET(sp, p, cast, size) { \ if ((p = (cast)malloc(size)) == NULL) { \ msgq(sp, M_SYSERR, NULL); \ return (1); \ } \ } /* * XXX * Don't depend on realloc(NULL, size) working. */ #define REALLOC(sp, p, cast, size) { \ if ((p = (cast)(p == NULL ? \ malloc(size) : realloc(p, size))) == NULL) \ msgq(sp, M_SYSERR, NULL); \ } /* * Versions of memmove(3) and memset(3) that use the size of the * initial pointer to figure out how much memory to manipulate. */ #define MEMMOVE(p, t, len) memmove(p, t, (len) * sizeof(*(p))) #define MEMSET(p, value, len) memset(p, value, (len) * sizeof(*(p))) vigor-0.016.orig/common/msg.c0100644000076400007640000005100207103707215014510 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)msg.c 10.48 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include /* XXX: param.h may not have included types.h */ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __STDC__ #include #else #include #endif #include "common.h" #include "../vi/vi.h" /* * msgq -- * Display a message. * * PUBLIC: void msgq __P((SCR *, mtype_t, const char *, ...)); */ void #ifdef __STDC__ msgq(SCR *sp, mtype_t mt, const char *fmt, ...) #else msgq(sp, mt, fmt, va_alist) SCR *sp; mtype_t mt; const char *fmt; va_dcl #endif { #ifndef NL_ARGMAX #define __NL_ARGMAX 20 /* Set to 9 by System V. */ struct { const char *str; /* String pointer. */ size_t arg; /* Argument number. */ size_t prefix; /* Prefix string length. */ size_t skip; /* Skipped string length. */ size_t suffix; /* Suffix string length. */ } str[__NL_ARGMAX]; #endif static int reenter; /* STATIC: Re-entrancy check. */ CHAR_T ch; GS *gp; size_t blen, cnt1, cnt2, len, mlen, nlen, soff; const char *p, *t, *u; char *bp, *mp, *rbp, *s_rbp; va_list ap; /* * !!! * It's possible to enter msg when there's no screen to hold the * message. If sp is NULL, ignore the special cases and put the * message out to stderr. */ if (sp == NULL) { gp = NULL; if (mt == M_BERR) mt = M_ERR; else if (mt == M_VINFO) mt = M_INFO; } else { gp = sp->gp; switch (mt) { case M_BERR: if (F_ISSET(sp, SC_VI) && !O_ISSET(sp, O_VERBOSE)) { F_SET(gp, G_BELLSCHED); return; } mt = M_ERR; break; case M_VINFO: if (!O_ISSET(sp, O_VERBOSE)) return; mt = M_INFO; /* FALLTHROUGH */ case M_INFO: if (F_ISSET(sp, SC_EX_SILENT)) return; break; case M_ERR: case M_SYSERR: break; default: abort(); } } /* * It's possible to reenter msg when it allocates space. We're * probably dead anyway, but there's no reason to drop core. * * XXX * Yes, there's a race, but it should only be two instructions. */ if (reenter++) return; /* Get space for the message. */ nlen = 1024; if (0) { retry: FREE_SPACE(sp, bp, blen); nlen *= 2; } bp = NULL; blen = 0; GET_SPACE_GOTO(sp, bp, blen, nlen); /* * Error prefix. * * mp: pointer to the current next character to be written * mlen: length of the already written characters * blen: total length of the buffer */ #define REM (blen - mlen) mp = bp; mlen = 0; if (mt == M_SYSERR) { p = msg_cat(sp, "020|Error: ", &len); if (REM < len) goto retry; memcpy(mp, p, len); mp += len; mlen += len; } /* * If we're running an ex command that the user didn't enter, display * the file name and line number prefix. */ if ((mt == M_ERR || mt == M_SYSERR) && sp != NULL && gp != NULL && gp->if_name != NULL) { for (p = gp->if_name; *p != '\0'; ++p) { len = snprintf(mp, REM, "%s", KEY_NAME(sp, *p)); mp += len; if ((mlen += len) > blen) goto retry; } len = snprintf(mp, REM, ", %d: ", gp->if_lno); mp += len; if ((mlen += len) > blen) goto retry; } /* If nothing to format, we're done. */ if (fmt == NULL) goto nofmt; fmt = msg_cat(sp, fmt, NULL); #ifndef NL_ARGMAX /* * Nvi should run on machines that don't support the numbered argument * specifications (%[digit]*$). We do this by reformatting the string * so that we can hand it to vsprintf(3) and it will use the arguments * in the right order. When vsprintf returns, we put the string back * into the right order. It's undefined, according to SVID III, to mix * numbered argument specifications with the standard style arguments, * so this should be safe. * * In addition, we also need a character that is known to not occur in * any vi message, for separating the parts of the string. As callers * of msgq are responsible for making sure that all the non-printable * characters are formatted for printing before calling msgq, we use a * random non-printable character selected at terminal initialization * time. This code isn't fast by any means, but as messages should be * relatively short and normally have only a few arguments, it won't be * too bad. Regardless, nobody has come up with any other solution. * * The result of this loop is an array of pointers into the message * string, with associated lengths and argument numbers. The array * is in the "correct" order, and the arg field contains the argument * order. */ for (p = fmt, soff = 0; soff < __NL_ARGMAX;) { for (t = p; *p != '\0' && *p != '%'; ++p); if (*p == '\0') break; ++p; if (!isdigit(*p)) { if (*p == '%') ++p; continue; } for (u = p; *++p != '\0' && isdigit(*p);); if (*p != '$') continue; /* Up to, and including the % character. */ str[soff].str = t; str[soff].prefix = u - t; /* Up to, and including the $ character. */ str[soff].arg = atoi(u); str[soff].skip = (p - u) + 1; if (str[soff].arg >= __NL_ARGMAX) goto ret; /* Up to, and including the conversion character. */ for (u = p; (ch = *++p) != '\0';) if (isalpha(ch) && strchr("diouxXfeEgGcspn", ch) != NULL) break; str[soff].suffix = p - u; if (ch != '\0') ++p; ++soff; } /* If no magic strings, we're done. */ if (soff == 0) goto format; /* Get space for the reordered strings. */ if ((rbp = malloc(nlen)) == NULL) goto ret; s_rbp = rbp; /* * Reorder the strings into the message string based on argument * order. * * !!! * We ignore arguments that are out of order, i.e. if we don't find * an argument, we continue. Assume (almost certainly incorrectly) * that whoever created the string knew what they were doing. * * !!! * Brute force "sort", but since we don't expect more than one or two * arguments in a string, the setup cost of a fast sort will be more * expensive than the loop. */ for (cnt1 = 1; cnt1 <= soff; ++cnt1) for (cnt2 = 0; cnt2 < soff; ++cnt2) if (cnt1 == str[cnt2].arg) { memmove(s_rbp, str[cnt2].str, str[cnt2].prefix); memmove(s_rbp + str[cnt2].prefix, str[cnt2].str + str[cnt2].prefix + str[cnt2].skip, str[cnt2].suffix); s_rbp += str[cnt2].prefix + str[cnt2].suffix; *s_rbp++ = gp == NULL ? DEFAULT_NOPRINT : gp->noprint; break; } *s_rbp = '\0'; fmt = rbp; #endif format: /* Format the arguments into the string. */ #ifdef __STDC__ va_start(ap, fmt); #else va_start(ap); #endif len = vsnprintf(mp, REM, fmt, ap); va_end(ap); if (len >= nlen) goto retry; #ifndef NL_ARGMAX if (soff == 0) goto nofmt; /* * Go through the resulting string, and, for each separator character * separated string, enter its new starting position and length in the * array. */ for (p = t = mp, cnt1 = 1, ch = gp == NULL ? DEFAULT_NOPRINT : gp->noprint; *p != '\0'; ++p) if (*p == ch) { for (cnt2 = 0; cnt2 < soff; ++cnt2) if (str[cnt2].arg == cnt1) break; str[cnt2].str = t; str[cnt2].prefix = p - t; t = p + 1; ++cnt1; } /* * Reorder the strings once again, putting them back into the * message buffer. * * !!! * Note, the length of the message gets decremented once for * each substring, when we discard the separator character. */ for (s_rbp = rbp, cnt1 = 0; cnt1 < soff; ++cnt1) { memmove(rbp, str[cnt1].str, str[cnt1].prefix); rbp += str[cnt1].prefix; --len; } memmove(mp, s_rbp, rbp - s_rbp); /* Free the reordered string memory. */ free(s_rbp); #endif nofmt: mp += len; if ((mlen += len) > blen) goto retry; if (mt == M_SYSERR) { len = snprintf(mp, REM, ": %s", strerror(errno)); mp += len; if ((mlen += len) > blen) goto retry; mt = M_ERR; } /* Add trailing newline. */ if ((mlen += 1) > blen) goto retry; *mp = '\n'; if (sp != NULL) (void)ex_fflush(sp); if (gp != NULL) gp->scr_msg(sp, mt, bp, mlen); else (void)fprintf(stderr, "%.*s", (int)mlen, bp); /* Cleanup. */ ret: FREE_SPACE(sp, bp, blen); alloc_err: reenter = 0; } /* * msgq_str -- * Display a message with an embedded string. * * PUBLIC: void msgq_str __P((SCR *, mtype_t, char *, char *)); */ void msgq_str(sp, mtype, str, fmt) SCR *sp; mtype_t mtype; char *str, *fmt; { int nf, sv_errno; char *p; if (str == NULL) { msgq(sp, mtype, fmt); return; } sv_errno = errno; p = msg_print(sp, str, &nf); errno = sv_errno; msgq(sp, mtype, fmt, p); if (nf) FREE_SPACE(sp, p, 0); } /* * mod_rpt -- * Report on the lines that changed. * * !!! * Historic vi documentation (USD:15-8) claimed that "The editor will also * always tell you when a change you make affects text which you cannot see." * This wasn't true -- edit a large file and do "100d|1". We don't implement * this semantic since it requires tracking each line that changes during a * command instead of just keeping count. * * Line counts weren't right in historic vi, either. For example, given the * file: * abc * def * the command 2d}, from the 'b' would report that two lines were deleted, * not one. * * PUBLIC: void mod_rpt __P((SCR *)); */ void mod_rpt(sp) SCR *sp; { static char * const action[] = { "293|added", "294|changed", "295|deleted", "296|joined", "297|moved", "298|shifted", "299|yanked", }; static char * const lines[] = { "300|line", "301|lines", }; recno_t total; u_long rptval; int first, cnt; size_t blen, len, tlen; const char *t; char * const *ap; char *bp, *p; /* Change reports are turned off in batch mode. */ if (F_ISSET(sp, SC_EX_SILENT)) return; /* Reset changing line number. */ sp->rptlchange = OOBLNO; /* * Don't build a message if not enough changed. * * !!! * And now, a vi clone test. Historically, vi reported if the number * of changed lines was > than the value, not >=, unless it was a yank * command, which used >=. No lie. Furthermore, an action was never * reported for a single line action. This is consistent for actions * other than yank, but yank didn't report single line actions even if * the report edit option was set to 1. In addition, setting report to * 0 in the 4BSD historic vi was equivalent to setting it to 1, for an * unknown reason (this bug was fixed in System III/V at some point). * I got complaints, so nvi conforms to System III/V historic practice * except that we report a yank of 1 line if report is set to 1. */ #define ARSIZE(a) sizeof(a) / sizeof (*a) #define MAXNUM 25 rptval = O_VAL(sp, O_REPORT); for (cnt = 0, total = 0; cnt < ARSIZE(action); ++cnt) total += sp->rptlines[cnt]; if (total == 0) return; if (total <= rptval && sp->rptlines[L_YANKED] < rptval) { for (cnt = 0; cnt < ARSIZE(action); ++cnt) sp->rptlines[cnt] = 0; return; } /* Build and display the message. */ GET_SPACE_GOTO(sp, bp, blen, sizeof(action) * MAXNUM + 1); for (p = bp, first = 1, tlen = 0, ap = action, cnt = 0; cnt < ARSIZE(action); ++ap, ++cnt) if (sp->rptlines[cnt] != 0) { if (first) first = 0; else { *p++ = ';'; *p++ = ' '; tlen += 2; } len = snprintf(p, MAXNUM, "%lu ", sp->rptlines[cnt]); p += len; tlen += len; t = msg_cat(sp, lines[sp->rptlines[cnt] == 1 ? 0 : 1], &len); memcpy(p, t, len); p += len; tlen += len; *p++ = ' '; ++tlen; t = msg_cat(sp, *ap, &len); memcpy(p, t, len); p += len; tlen += len; sp->rptlines[cnt] = 0; } /* Add trailing newline. */ *p = '\n'; ++tlen; (void)ex_fflush(sp); sp->gp->scr_msg(sp, M_INFO, bp, tlen); FREE_SPACE(sp, bp, blen); alloc_err: return; #undef ARSIZE #undef MAXNUM } /* * msgq_status -- * Report on the file's status. * * PUBLIC: void msgq_status __P((SCR *, recno_t, u_int)); */ void msgq_status(sp, lno, flags) SCR *sp; recno_t lno; u_int flags; { static int poisoned; recno_t last; size_t blen, len; int cnt, needsep; const char *t; char **ap, *bp, *np, *p, *s; /* Get sufficient memory. */ len = strlen(sp->frp->name); GET_SPACE_GOTO(sp, bp, blen, len * MAX_CHARACTER_COLUMNS + 128); p = bp; /* Copy in the filename. */ for (p = bp, t = sp->frp->name; *t != '\0'; ++t) { len = KEY_LEN(sp, *t); memcpy(p, KEY_NAME(sp, *t), len); p += len; } np = p; *p++ = ':'; *p++ = ' '; /* Copy in the argument count. */ if (F_ISSET(sp, SC_STATUS_CNT) && sp->argv != NULL) { for (cnt = 0, ap = sp->argv; *ap != NULL; ++ap, ++cnt); if (cnt > 1) { (void)sprintf(p, msg_cat(sp, "317|%d files to edit", NULL), cnt); p += strlen(p); *p++ = ':'; *p++ = ' '; } F_CLR(sp, SC_STATUS_CNT); } /* * See nvi/exf.c:file_init() for a description of how and when the * read-only bit is set. * * !!! * The historic display for "name changed" was "[Not edited]". */ needsep = 0; if (F_ISSET(sp->frp, FR_NEWFILE)) { F_CLR(sp->frp, FR_NEWFILE); t = msg_cat(sp, "021|new file", &len); memcpy(p, t, len); p += len; needsep = 1; } else { if (F_ISSET(sp->frp, FR_NAMECHANGE)) { t = msg_cat(sp, "022|name changed", &len); memcpy(p, t, len); p += len; needsep = 1; } if (needsep) { *p++ = ','; *p++ = ' '; } if (F_ISSET(sp->ep, F_MODIFIED)) t = msg_cat(sp, "023|modified", &len); else t = msg_cat(sp, "024|unmodified", &len); memcpy(p, t, len); p += len; needsep = 1; } if (F_ISSET(sp->frp, FR_UNLOCKED)) { if (needsep) { *p++ = ','; *p++ = ' '; } t = msg_cat(sp, "025|UNLOCKED", &len); memcpy(p, t, len); p += len; needsep = 1; } if (O_ISSET(sp, O_READONLY)) { if (needsep) { *p++ = ','; *p++ = ' '; } t = msg_cat(sp, "026|readonly", &len); memcpy(p, t, len); p += len; needsep = 1; } if (needsep) { *p++ = ':'; *p++ = ' '; } if (LF_ISSET(MSTAT_SHOWLAST)) { if (db_last(sp, &last)) return; if (last == 0) { t = msg_cat(sp, "028|empty file", &len); memcpy(p, t, len); p += len; } else { t = msg_cat(sp, "027|line %lu of %lu [%ld%%]", &len); (void)sprintf(p, t, lno, last, (lno * 100) / last); p += strlen(p); } } else { t = msg_cat(sp, "029|line %lu", &len); (void)sprintf(p, t, lno); p += strlen(p); } #ifdef DEBUG (void)sprintf(p, " (pid %lu)", (u_long)getpid()); p += strlen(p); #endif *p++ = '\n'; len = p - bp; /* * There's a nasty problem with long path names. Cscope and tags files * can result in long paths and vi will request a continuation key from * the user as soon as it starts the screen. Unfortunately, the user * has already typed ahead, and chaos results. If we assume that the * characters in the filenames and informational messages only take a * single screen column each, we can trim the filename. * * XXX * Status lines get put up at fairly awkward times. For example, when * you do a filter read (e.g., :read ! echo foo) in the top screen of a * split screen, we have to repaint the status lines for all the screens * below the top screen. We don't want users having to enter continue * characters for those screens. Make it really hard to screw this up. */ s = bp; if (LF_ISSET(MSTAT_TRUNCATE) && len > sp->cols) { for (; s < np && (*s != '/' || (p - s) > sp->cols - 3); ++s); if (s == np) { s = p - (sp->cols - 5); *--s = ' '; } *--s = '.'; *--s = '.'; *--s = '.'; len = p - s; } /* Flush any waiting ex messages. */ (void)ex_fflush(sp); sp->gp->scr_msg(sp, M_INFO, s, len); FREE_SPACE(sp, bp, blen); alloc_err: return; } /* * msg_open -- * Open the message catalogs. * * PUBLIC: int msg_open __P((SCR *, char *)); */ int msg_open(sp, file) SCR *sp; char *file; { /* * !!! * Assume that the first file opened is the system default, and that * all subsequent ones user defined. Only display error messages * if we can't open the user defined ones -- it's useful to know if * the system one wasn't there, but if nvi is being shipped with an * installed system, the file will be there, if it's not, then the * message will be repeated every time nvi is started up. */ static int first = 1; DB *db; DBT data, key; recno_t msgno; char *p, *t, buf[MAXPATHLEN]; if ((p = strrchr(file, '/')) != NULL && p[1] == '\0' && ((t = getenv("LC_MESSAGES")) != NULL && t[0] != '\0' || (t = getenv("LANG")) != NULL && t[0] != '\0')) { (void)snprintf(buf, sizeof(buf), "%s%s", file, t); p = buf; } else p = file; if ((db = dbopen(p, O_NONBLOCK | O_RDONLY, 0, DB_RECNO, NULL)) == NULL) { if (first) { first = 0; return (1); } msgq_str(sp, M_SYSERR, p, "%s"); return (1); } /* * Test record 1 for the magic string. The msgq call is here so * the message catalog build finds it. */ #define VMC "VI_MESSAGE_CATALOG" key.data = &msgno; key.size = sizeof(recno_t); msgno = 1; if (db->get(db, &key, &data, 0) != 0 || data.size != sizeof(VMC) - 1 || memcmp(data.data, VMC, sizeof(VMC) - 1)) { (void)db->close(db); if (first) { first = 0; return (1); } msgq_str(sp, M_ERR, p, "030|The file %s is not a message catalog"); return (1); } first = 0; if (sp->gp->msg != NULL) (void)sp->gp->msg->close(sp->gp->msg); sp->gp->msg = db; return (0); } /* * msg_close -- * Close the message catalogs. * * PUBLIC: void msg_close __P((GS *)); */ void msg_close(gp) GS *gp; { if (gp->msg != NULL) (void)gp->msg->close(gp->msg); } /* * msg_cont -- * Return common continuation messages. * * PUBLIC: const char *msg_cmsg __P((SCR *, cmsg_t, size_t *)); */ const char * msg_cmsg(sp, which, lenp) SCR *sp; cmsg_t which; size_t *lenp; { switch (which) { case CMSG_CONF: return (msg_cat(sp, "268|confirm? [ynq]", lenp)); case CMSG_CONT: return (msg_cat(sp, "269|Press any key to continue: ", lenp)); case CMSG_CONT_EX: return (msg_cat(sp, "270|Press any key to continue [: to enter more ex commands]: ", lenp)); case CMSG_CONT_R: return (msg_cat(sp, "161|Press Enter to continue: ", lenp)); case CMSG_CONT_S: return (msg_cat(sp, "275| cont?", lenp)); case CMSG_CONT_Q: return (msg_cat(sp, "271|Press any key to continue [q to quit]: ", lenp)); default: abort(); } /* NOTREACHED */ } /* * msg_cat -- * Return a single message from the catalog, plus its length. * * !!! * Only a single catalog message can be accessed at a time, if multiple * ones are needed, they must be copied into local memory. * * PUBLIC: const char *msg_cat __P((SCR *, const char *, size_t *)); */ const char * msg_cat(sp, str, lenp) SCR *sp; const char *str; size_t *lenp; { GS *gp; DBT data, key; recno_t msgno; /* * If it's not a catalog message, i.e. has doesn't have a leading * number and '|' symbol, we're done. */ if (isdigit(str[0]) && isdigit(str[1]) && isdigit(str[2]) && str[3] == '|') { key.data = &msgno; key.size = sizeof(recno_t); msgno = atoi(str); /* * XXX * Really sleazy hack -- we put an extra character on the * end of the format string, and then we change it to be * the nul termination of the string. There ought to be * a better way. Once we can allocate multiple temporary * memory buffers, maybe we can use one of them instead. */ gp = sp == NULL ? NULL : sp->gp; if (gp != NULL && gp->msg != NULL && gp->msg->get(gp->msg, &key, &data, 0) == 0 && data.size != 0) { if (lenp != NULL) *lenp = data.size - 1; ((char *)data.data)[data.size - 1] = '\0'; return (data.data); } str = &str[4]; } if (lenp != NULL) *lenp = strlen(str); return (str); } /* * msg_print -- * Return a printable version of a string, in allocated memory. * * PUBLIC: char *msg_print __P((SCR *, const char *, int *)); */ char * msg_print(sp, s, needfree) SCR *sp; const char *s; int *needfree; { size_t blen, nlen; const char *cp; char *bp, *ep, *p, *t; *needfree = 0; for (cp = s; *cp != '\0'; ++cp) if (!isprint(*cp)) break; if (*cp == '\0') return ((char *)s); /* SAFE: needfree set to 0. */ nlen = 0; if (0) { retry: if (sp == NULL) free(bp); else FREE_SPACE(sp, bp, blen); needfree = 0; } nlen += 256; if (sp == NULL) { if ((bp = malloc(nlen)) == NULL) goto alloc_err; } else GET_SPACE_GOTO(sp, bp, blen, nlen); if (0) { alloc_err: return (""); } *needfree = 1; for (p = bp, ep = (bp + blen) - 1, cp = s; *cp != '\0' && p < ep; ++cp) for (t = KEY_NAME(sp, *cp); *t != '\0' && p < ep; *p++ = *t++); if (p == ep) goto retry; *p = '\0'; return (bp); } vigor-0.016.orig/common/msg.h0100644000076400007640000000435007103707215014521 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)msg.h 10.10 (Berkeley) 5/10/96 */ /* * Common messages (continuation or confirmation). */ typedef enum { CMSG_CONF, CMSG_CONT, CMSG_CONT_EX, CMSG_CONT_R, CMSG_CONT_S, CMSG_CONT_Q } cmsg_t; /* * Message types. * * !!! * In historical vi, O_VERBOSE didn't exist, and O_TERSE made the error * messages shorter. In this implementation, O_TERSE has no effect and * O_VERBOSE results in informational displays about common errors, for * naive users. * * M_NONE Display to the user, no reformatting, no nothing. * * M_BERR Error: M_ERR if O_VERBOSE, else bell. * M_ERR Error: Display in inverse video. * M_INFO Info: Display in normal video. * M_SYSERR Error: M_ERR, using strerror(3) message. * M_VINFO Info: M_INFO if O_VERBOSE, else ignore. * * The underlying message display routines only need to know about M_NONE, * M_ERR and M_INFO -- all the other message types are converted into one * of them by the message routines. */ typedef enum { M_NONE = 1, M_BERR, M_ERR, M_INFO, M_SYSERR, M_VINFO } mtype_t; /* * There are major problems with error messages being generated by routines * preparing the screen to display error messages. It's possible for the * editor to generate messages before we have a screen in which to display * them, or during the transition between ex (and vi startup) and a true vi. * There's a queue in the global area to hold them. * * If SC_EX/SC_VI is set, that's the mode that the editor is in. If the flag * S_SCREEN_READY is set, that means that the screen is prepared to display * messages. */ typedef struct _msgh MSGH; /* MSGS list head structure. */ LIST_HEAD(_msgh, _msg); struct _msg { LIST_ENTRY(_msg) q; /* Linked list of messages. */ mtype_t mtype; /* Message type: M_NONE, M_ERR, M_INFO. */ char *buf; /* Message buffer. */ size_t len; /* Message length. */ }; /* Flags to msgq_status(). */ #define MSTAT_SHOWLAST 0x01 /* Show the line number of the last line. */ #define MSTAT_TRUNCATE 0x02 /* Truncate the file name if it's too long. */ vigor-0.016.orig/common/options.c0100644000076400007640000006741207103707216015432 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)options.c 10.51 (Berkeley) 10/14/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "../vi/vi.h" #include "pathnames.h" static int opts_abbcmp __P((const void *, const void *)); static int opts_cmp __P((const void *, const void *)); static int opts_print __P((SCR *, OPTLIST const *)); /* * O'Reilly noted options and abbreviations are from "Learning the VI Editor", * Fifth Edition, May 1992. There's no way of knowing what systems they are * actually from. * * HPUX noted options and abbreviations are from "The Ultimate Guide to the * VI and EX Text Editors", 1990. */ OPTLIST const optlist[] = { /* O_ALTWERASE 4.4BSD */ {"altwerase", f_altwerase, OPT_0BOOL, 0}, /* O_AUTOINDENT 4BSD */ {"autoindent", NULL, OPT_0BOOL, 0}, /* O_AUTOPRINT 4BSD */ {"autoprint", NULL, OPT_1BOOL, 0}, /* O_AUTOWRITE 4BSD */ {"autowrite", NULL, OPT_0BOOL, 0}, /* O_BACKUP 4.4BSD */ {"backup", NULL, OPT_STR, 0}, /* O_BEAUTIFY 4BSD */ {"beautify", NULL, OPT_0BOOL, 0}, /* O_CDPATH 4.4BSD */ {"cdpath", NULL, OPT_STR, 0}, /* O_CEDIT 4.4BSD */ {"cedit", NULL, OPT_STR, 0}, /* O_COLUMNS 4.4BSD */ {"columns", f_columns, OPT_NUM, OPT_NOSAVE}, /* O_COMMENT 4.4BSD */ {"comment", NULL, OPT_0BOOL, 0}, /* O_DIRECTORY 4BSD */ {"directory", NULL, OPT_STR, 0}, /* O_EDCOMPATIBLE 4BSD */ {"edcompatible",NULL, OPT_0BOOL, 0}, /* O_ESCAPETIME 4.4BSD */ {"escapetime", NULL, OPT_NUM, 0}, /* O_ERRORBELLS 4BSD */ {"errorbells", NULL, OPT_0BOOL, 0}, /* O_EXRC System V (undocumented) */ {"exrc", NULL, OPT_0BOOL, 0}, /* O_EXTENDED 4.4BSD */ {"extended", f_recompile, OPT_0BOOL, 0}, /* O_FILEC 4.4BSD */ {"filec", NULL, OPT_STR, 0}, /* O_FLASH HPUX */ {"flash", NULL, OPT_1BOOL, 0}, /* O_HARDTABS 4BSD */ {"hardtabs", NULL, OPT_NUM, 0}, /* O_ICLOWER 4.4BSD */ {"iclower", f_recompile, OPT_0BOOL, 0}, /* O_IGNORECASE 4BSD */ {"ignorecase", f_recompile, OPT_0BOOL, 0}, /* O_KEYTIME 4.4BSD */ {"keytime", NULL, OPT_NUM, 0}, /* O_LEFTRIGHT 4.4BSD */ {"leftright", f_reformat, OPT_0BOOL, 0}, /* O_LINES 4.4BSD */ {"lines", f_lines, OPT_NUM, OPT_NOSAVE}, /* O_LISP 4BSD * XXX * When the lisp option is implemented, delete the OPT_NOSAVE flag, * so that :mkexrc dumps it. */ {"lisp", f_lisp, OPT_0BOOL, OPT_NOSAVE}, /* O_LIST 4BSD */ {"list", f_reformat, OPT_0BOOL, 0}, /* O_LOCKFILES 4.4BSD * XXX * Locking isn't reliable enough over NFS to require it, in addition, * it's a serious startup performance problem over some remote links. */ {"lock", NULL, OPT_1BOOL, 0}, /* O_MAGIC 4BSD */ {"magic", NULL, OPT_1BOOL, 0}, /* O_MATCHTIME 4.4BSD */ {"matchtime", NULL, OPT_NUM, 0}, /* O_MESG 4BSD */ {"mesg", NULL, OPT_1BOOL, 0}, /* O_MODELINE 4BSD * !!! * This has been documented in historical systems as both "modeline" * and as "modelines". Regardless of the name, this option represents * a security problem of mammoth proportions, not to mention a stunning * example of what your intro CS professor referred to as the perils of * mixing code and data. Don't add it, or I will kill you. */ {"modeline", NULL, OPT_0BOOL, OPT_NOSET}, /* O_MSGCAT 4.4BSD */ {"msgcat", f_msgcat, OPT_STR, 0}, /* O_NOPRINT 4.4BSD */ {"noprint", f_print, OPT_STR, 0}, /* O_NUMBER 4BSD */ {"number", f_reformat, OPT_0BOOL, 0}, /* O_OCTAL 4.4BSD */ {"octal", f_print, OPT_0BOOL, 0}, /* O_OPEN 4BSD */ {"open", NULL, OPT_1BOOL, 0}, /* O_OPTIMIZE 4BSD */ {"optimize", NULL, OPT_1BOOL, 0}, /* O_PARAGRAPHS 4BSD */ {"paragraphs", f_paragraph, OPT_STR, 0}, /* O_PATH 4.4BSD */ {"path", NULL, OPT_STR, 0}, /* O_PRINT 4.4BSD */ {"print", f_print, OPT_STR, 0}, /* O_PROMPT 4BSD */ {"prompt", NULL, OPT_1BOOL, 0}, /* O_READONLY 4BSD (undocumented) */ {"readonly", f_readonly, OPT_0BOOL, OPT_ALWAYS}, /* O_RECDIR 4.4BSD */ {"recdir", NULL, OPT_STR, 0}, /* O_REDRAW 4BSD */ {"redraw", NULL, OPT_0BOOL, 0}, /* O_REMAP 4BSD */ {"remap", NULL, OPT_1BOOL, 0}, /* O_REPORT 4BSD */ {"report", NULL, OPT_NUM, 0}, /* O_RULER 4.4BSD */ {"ruler", NULL, OPT_0BOOL, 0}, /* O_SCROLL 4BSD */ {"scroll", NULL, OPT_NUM, 0}, /* O_SEARCHINCR 4.4BSD */ {"searchincr", NULL, OPT_0BOOL, 0}, /* O_SECTIONS 4BSD */ {"sections", f_section, OPT_STR, 0}, /* O_SECURE 4.4BSD */ {"secure", NULL, OPT_0BOOL, OPT_NOUNSET}, /* O_SHELL 4BSD */ {"shell", NULL, OPT_STR, 0}, /* O_SHELLMETA 4.4BSD */ {"shellmeta", NULL, OPT_STR, 0}, /* O_SHIFTWIDTH 4BSD */ {"shiftwidth", NULL, OPT_NUM, OPT_NOZERO}, /* O_SHOWMATCH 4BSD */ {"showmatch", NULL, OPT_0BOOL, 0}, /* O_SHOWMODE 4.4BSD */ {"showmode", NULL, OPT_0BOOL, 0}, /* O_SIDESCROLL 4.4BSD */ {"sidescroll", NULL, OPT_NUM, OPT_NOZERO}, /* O_SLOWOPEN 4BSD */ {"slowopen", NULL, OPT_0BOOL, 0}, /* O_SOURCEANY 4BSD (undocumented) * !!! * Historic vi, on startup, source'd $HOME/.exrc and ./.exrc, if they * were owned by the user. The sourceany option was an undocumented * feature of historic vi which permitted the startup source'ing of * .exrc files the user didn't own. This is an obvious security problem, * and we ignore the option. */ {"sourceany", NULL, OPT_0BOOL, OPT_NOSET}, /* O_TABSTOP 4BSD */ {"tabstop", f_reformat, OPT_NUM, OPT_NOZERO}, /* O_TAGLENGTH 4BSD */ {"taglength", NULL, OPT_NUM, 0}, /* O_TAGS 4BSD */ {"tags", NULL, OPT_STR, 0}, /* O_TERM 4BSD * !!! * By default, the historic vi always displayed information about two * options, redraw and term. Term seems sufficient. */ {"term", NULL, OPT_STR, OPT_ADISP|OPT_NOSAVE}, /* O_TERSE 4BSD */ {"terse", NULL, OPT_0BOOL, 0}, /* O_TILDEOP 4.4BSD */ {"tildeop", NULL, OPT_0BOOL, 0}, /* O_TIMEOUT 4BSD (undocumented) */ {"timeout", NULL, OPT_1BOOL, 0}, /* O_TTYWERASE 4.4BSD */ {"ttywerase", f_ttywerase, OPT_0BOOL, 0}, /* O_VERBOSE 4.4BSD */ {"verbose", NULL, OPT_0BOOL, 0}, /* O_W1200 4BSD */ {"w1200", f_w1200, OPT_NUM, OPT_NDISP|OPT_NOSAVE}, /* O_W300 4BSD */ {"w300", f_w300, OPT_NUM, OPT_NDISP|OPT_NOSAVE}, /* O_W9600 4BSD */ {"w9600", f_w9600, OPT_NUM, OPT_NDISP|OPT_NOSAVE}, /* O_WARN 4BSD */ {"warn", NULL, OPT_1BOOL, 0}, /* O_WINDOW 4BSD */ {"window", f_window, OPT_NUM, 0}, /* O_WINDOWNAME 4BSD */ {"windowname", NULL, OPT_0BOOL, 0}, /* O_WRAPLEN 4.4BSD */ {"wraplen", NULL, OPT_NUM, 0}, /* O_WRAPMARGIN 4BSD */ {"wrapmargin", NULL, OPT_NUM, 0}, /* O_WRAPSCAN 4BSD */ {"wrapscan", NULL, OPT_1BOOL, 0}, /* O_WRITEANY 4BSD */ {"writeany", NULL, OPT_0BOOL, 0}, {NULL}, }; typedef struct abbrev { char *name; int offset; } OABBREV; static OABBREV const abbrev[] = { {"ai", O_AUTOINDENT}, /* 4BSD */ {"ap", O_AUTOPRINT}, /* 4BSD */ {"aw", O_AUTOWRITE}, /* 4BSD */ {"bf", O_BEAUTIFY}, /* 4BSD */ {"co", O_COLUMNS}, /* 4.4BSD */ {"dir", O_DIRECTORY}, /* 4BSD */ {"eb", O_ERRORBELLS}, /* 4BSD */ {"ed", O_EDCOMPATIBLE}, /* 4BSD */ {"ex", O_EXRC}, /* System V (undocumented) */ {"ht", O_HARDTABS}, /* 4BSD */ {"ic", O_IGNORECASE}, /* 4BSD */ {"li", O_LINES}, /* 4.4BSD */ {"modelines", O_MODELINE}, /* HPUX */ {"nu", O_NUMBER}, /* 4BSD */ {"opt", O_OPTIMIZE}, /* 4BSD */ {"para", O_PARAGRAPHS}, /* 4BSD */ {"re", O_REDRAW}, /* O'Reilly */ {"ro", O_READONLY}, /* 4BSD (undocumented) */ {"scr", O_SCROLL}, /* 4BSD (undocumented) */ {"sect", O_SECTIONS}, /* O'Reilly */ {"sh", O_SHELL}, /* 4BSD */ {"slow", O_SLOWOPEN}, /* 4BSD */ {"sm", O_SHOWMATCH}, /* 4BSD */ {"smd", O_SHOWMODE}, /* 4BSD */ {"sw", O_SHIFTWIDTH}, /* 4BSD */ {"tag", O_TAGS}, /* 4BSD (undocumented) */ {"tl", O_TAGLENGTH}, /* 4BSD */ {"to", O_TIMEOUT}, /* 4BSD (undocumented) */ {"ts", O_TABSTOP}, /* 4BSD */ {"tty", O_TERM}, /* 4BSD (undocumented) */ {"ttytype", O_TERM}, /* 4BSD (undocumented) */ {"w", O_WINDOW}, /* O'Reilly */ {"wa", O_WRITEANY}, /* 4BSD */ {"wi", O_WINDOW}, /* 4BSD (undocumented) */ {"wl", O_WRAPLEN}, /* 4.4BSD */ {"wm", O_WRAPMARGIN}, /* 4BSD */ {"ws", O_WRAPSCAN}, /* 4BSD */ {NULL}, }; /* * opts_init -- * Initialize some of the options. * * PUBLIC: int opts_init __P((SCR *, int *)); */ int opts_init(sp, oargs) SCR *sp; int *oargs; { ARGS *argv[2], a, b; OPTLIST const *op; u_long v; int cnt, optindx; char *s, b1[1024]; a.bp = b1; b.bp = NULL; a.len = b.len = 0; argv[0] = &a; argv[1] = &b; /* Set numeric and string default values. */ #define OI(indx, str) { \ if (str != b1) /* GCC puts strings in text-space. */ \ (void)strcpy(b1, str); \ a.len = strlen(b1); \ if (opts_set(sp, argv, NULL)) { \ optindx = indx; \ goto err; \ } \ } /* * Indirect global options to global space. Specifically, set up * terminal, lines, columns first, they're used by other options. * Note, don't set the flags until we've set up the indirection. */ if (o_set(sp, O_TERM, 0, NULL, GO_TERM)) goto err; F_SET(&sp->opts[O_TERM], OPT_GLOBAL); if (o_set(sp, O_LINES, 0, NULL, GO_LINES)) goto err; F_SET(&sp->opts[O_LINES], OPT_GLOBAL); if (o_set(sp, O_COLUMNS, 0, NULL, GO_COLUMNS)) goto err; F_SET(&sp->opts[O_COLUMNS], OPT_GLOBAL); if (o_set(sp, O_SECURE, 0, NULL, GO_SECURE)) goto err; F_SET(&sp->opts[O_SECURE], OPT_GLOBAL); /* Initialize string values. */ (void)snprintf(b1, sizeof(b1), "cdpath=%s", (s = getenv("CDPATH")) == NULL ? ":" : s); OI(O_CDPATH, b1); /* * !!! * Vi historically stored temporary files in /var/tmp. We store them * in /tmp by default, hoping it's a memory based file system. There * are two ways to change this -- the user can set either the directory * option or the TMPDIR environmental variable. */ (void)snprintf(b1, sizeof(b1), "directory=%s", (s = getenv("TMPDIR")) == NULL ? _PATH_TMP : s); OI(O_DIRECTORY, b1); OI(O_ESCAPETIME, "escapetime=1"); OI(O_KEYTIME, "keytime=6"); OI(O_MATCHTIME, "matchtime=7"); (void)snprintf(b1, sizeof(b1), "msgcat=%s", _PATH_MSGCAT); OI(O_MSGCAT, b1); OI(O_REPORT, "report=5"); OI(O_PARAGRAPHS, "paragraphs=IPLPPPQPP LIpplpipbp"); (void)snprintf(b1, sizeof(b1), "path=%s", ""); OI(O_PATH, b1); (void)snprintf(b1, sizeof(b1), "recdir=%s", _PATH_PRESERVE); OI(O_RECDIR, b1); OI(O_SECTIONS, "sections=NHSHH HUnhsh"); (void)snprintf(b1, sizeof(b1), "shell=%s", (s = getenv("SHELL")) == NULL ? _PATH_BSHELL : s); OI(O_SHELL, b1); OI(O_SHELLMETA, "shellmeta=~{[*?$`'\"\\"); OI(O_SHIFTWIDTH, "shiftwidth=8"); OI(O_SIDESCROLL, "sidescroll=16"); OI(O_TABSTOP, "tabstop=8"); (void)snprintf(b1, sizeof(b1), "tags=%s", _PATH_TAGS); OI(O_TAGS, b1); /* * XXX * Initialize O_SCROLL here, after term; initializing term should * have created a LINES/COLUMNS value. */ if ((v = (O_VAL(sp, O_LINES) - 1) / 2) == 0) v = 1; (void)snprintf(b1, sizeof(b1), "scroll=%ld", v); OI(O_SCROLL, b1); /* * The default window option values are: * 8 if baud rate <= 600 * 16 if baud rate <= 1200 * LINES - 1 if baud rate > 1200 * * Note, the windows option code will correct any too-large value * or when the O_LINES value is 1. */ if (sp->gp->scr_baud(sp, &v)) return (1); if (v <= 600) v = 8; else if (v <= 1200) v = 16; else v = O_VAL(sp, O_LINES) - 1; (void)snprintf(b1, sizeof(b1), "window=%lu", v); OI(O_WINDOW, b1); /* * Set boolean default values, and copy all settings into the default * information. OS_NOFREE is set, we're copying, not replacing. */ for (op = optlist, cnt = 0; op->name != NULL; ++op, ++cnt) switch (op->type) { case OPT_0BOOL: break; case OPT_1BOOL: O_SET(sp, cnt); O_D_SET(sp, cnt); break; case OPT_NUM: o_set(sp, cnt, OS_DEF, NULL, O_VAL(sp, cnt)); break; case OPT_STR: if (O_STR(sp, cnt) != NULL && o_set(sp, cnt, OS_DEF | OS_NOFREE | OS_STRDUP, O_STR(sp, cnt), 0)) goto err; break; default: abort(); } /* * !!! * Some options can be initialized by the command name or the * command-line arguments. They don't set the default values, * it's historic practice. */ for (; *oargs != -1; ++oargs) OI(*oargs, optlist[*oargs].name); return (0); #undef OI err: msgq(sp, M_ERR, "031|Unable to set default %s option", optlist[optindx].name); return (1); } /* * opts_set -- * Change the values of one or more options. * * PUBLIC: int opts_set __P((SCR *, ARGS *[], char *)); */ int opts_set(sp, argv, usage) SCR *sp; ARGS *argv[]; char *usage; { enum optdisp disp; enum nresult nret; OPTLIST const *op; OPTION *spo; u_long value, turnoff; int ch, equals, nf, nf2, offset, qmark, rval; char *endp, *name, *p, *sep, *t; disp = NO_DISPLAY; for (rval = 0; argv[0]->len != 0; ++argv) { /* * The historic vi dumped the options for each occurrence of * "all" in the set list. Puhleeze. */ if (!strcmp(argv[0]->bp, "all")) { disp = ALL_DISPLAY; continue; } /* Find equals sign or question mark. */ for (sep = NULL, equals = qmark = 0, p = name = argv[0]->bp; (ch = *p) != '\0'; ++p) if (ch == '=' || ch == '?') { if (p == name) { if (usage != NULL) msgq(sp, M_ERR, "032|Usage: %s", usage); return (1); } sep = p; if (ch == '=') equals = 1; else qmark = 1; break; } turnoff = 0; op = NULL; if (sep != NULL) *sep++ = '\0'; /* Search for the name, then name without any leading "no". */ if ((op = opts_search(name)) == NULL && name[0] == 'n' && name[1] == 'o') { turnoff = 1; name += 2; op = opts_search(name); } if (op == NULL) { opts_nomatch(sp, name); rval = 1; continue; } /* Find current option values. */ offset = op - optlist; spo = sp->opts + offset; /* * !!! * Historically, the question mark could be a separate * argument. */ if (!equals && !qmark && argv[1]->len == 1 && argv[1]->bp[0] == '?') { ++argv; qmark = 1; } /* Set name, value. */ switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: /* Some options may not be reset. */ if (F_ISSET(op, OPT_NOUNSET) && turnoff) { msgq_str(sp, M_ERR, name, "291|set: the %s option may not be turned off"); rval = 1; break; } /* Some options may not be set. */ if (F_ISSET(op, OPT_NOSET) && !turnoff) { msgq_str(sp, M_ERR, name, "313|set: the %s option may never be turned on"); rval = 1; break; } if (equals) { msgq_str(sp, M_ERR, name, "034|set: [no]%s option doesn't take a value"); rval = 1; break; } if (qmark) { if (!disp) disp = SELECT_DISPLAY; F_SET(spo, OPT_SELECTED); break; } /* * Do nothing if the value is unchanged, the underlying * functions can be expensive. */ if (!F_ISSET(op, OPT_ALWAYS)) if (turnoff) { if (!O_ISSET(sp, offset)) break; } else { if (O_ISSET(sp, offset)) break; } /* Report to subsystems. */ if (op->func != NULL && op->func(sp, spo, NULL, &turnoff) || ex_optchange(sp, offset, NULL, &turnoff) || v_optchange(sp, offset, NULL, &turnoff) || sp->gp->scr_optchange(sp, offset, NULL, &turnoff)) { rval = 1; break; } /* Set the value. */ if (turnoff) O_CLR(sp, offset); else O_SET(sp, offset); break; case OPT_NUM: if (turnoff) { msgq_str(sp, M_ERR, name, "035|set: %s option isn't a boolean"); rval = 1; break; } if (qmark || !equals) { if (!disp) disp = SELECT_DISPLAY; F_SET(spo, OPT_SELECTED); break; } if (!isdigit(sep[0])) goto badnum; if ((nret = nget_uslong(&value, sep, &endp, 10)) != NUM_OK) { p = msg_print(sp, name, &nf); t = msg_print(sp, sep, &nf2); switch (nret) { case NUM_ERR: msgq(sp, M_SYSERR, "036|set: %s option: %s", p, t); break; case NUM_OVER: msgq(sp, M_ERR, "037|set: %s option: %s: value overflow", p, t); break; case NUM_OK: case NUM_UNDER: abort(); } if (nf) FREE_SPACE(sp, p, 0); if (nf2) FREE_SPACE(sp, t, 0); rval = 1; break; } if (*endp && !isblank(*endp)) { badnum: p = msg_print(sp, name, &nf); t = msg_print(sp, sep, &nf2); msgq(sp, M_ERR, "038|set: %s option: %s is an illegal number", p, t); if (nf) FREE_SPACE(sp, p, 0); if (nf2) FREE_SPACE(sp, t, 0); rval = 1; break; } /* Some options may never be set to zero. */ if (F_ISSET(op, OPT_NOZERO) && value == 0) { msgq_str(sp, M_ERR, name, "314|set: the %s option may never be set to 0"); rval = 1; break; } /* * Do nothing if the value is unchanged, the underlying * functions can be expensive. */ if (!F_ISSET(op, OPT_ALWAYS) && O_VAL(sp, offset) == value) break; /* Report to subsystems. */ if (op->func != NULL && op->func(sp, spo, sep, &value) || ex_optchange(sp, offset, sep, &value) || v_optchange(sp, offset, sep, &value) || sp->gp->scr_optchange(sp, offset, sep, &value)) { rval = 1; break; } /* Set the value. */ if (o_set(sp, offset, 0, NULL, value)) rval = 1; break; case OPT_STR: if (turnoff) { msgq_str(sp, M_ERR, name, "039|set: %s option isn't a boolean"); rval = 1; break; } if (qmark || !equals) { if (!disp) disp = SELECT_DISPLAY; F_SET(spo, OPT_SELECTED); break; } /* * Do nothing if the value is unchanged, the underlying * functions can be expensive. */ if (!F_ISSET(op, OPT_ALWAYS) && O_STR(sp, offset) != NULL && !strcmp(O_STR(sp, offset), sep)) break; /* Report to subsystems. */ if (op->func != NULL && op->func(sp, spo, sep, NULL) || ex_optchange(sp, offset, sep, NULL) || v_optchange(sp, offset, sep, NULL) || sp->gp->scr_optchange(sp, offset, sep, NULL)) { rval = 1; break; } /* Set the value. */ if (o_set(sp, offset, OS_STRDUP, sep, 0)) rval = 1; break; default: abort(); } } if (disp != NO_DISPLAY) opts_dump(sp, disp); return (rval); } /* * o_set -- * Set an option's value. * * PUBLIC: int o_set __P((SCR *, int, u_int, char *, u_long)); */ int o_set(sp, opt, flags, str, val) SCR *sp; int opt; u_int flags; char *str; u_long val; { OPTION *op; /* Set a pointer to the options area. */ op = F_ISSET(&sp->opts[opt], OPT_GLOBAL) ? &sp->gp->opts[sp->opts[opt].o_cur.val] : &sp->opts[opt]; /* Copy the string, if requested. */ if (LF_ISSET(OS_STRDUP) && (str = strdup(str)) == NULL) { msgq(sp, M_SYSERR, NULL); return (1); } /* Free the previous string, if requested, and set the value. */ if LF_ISSET(OS_DEF) if (LF_ISSET(OS_STR | OS_STRDUP)) { if (!LF_ISSET(OS_NOFREE) && op->o_def.str != NULL) free(op->o_def.str); op->o_def.str = str; } else op->o_def.val = val; else if (LF_ISSET(OS_STR | OS_STRDUP)) { if (!LF_ISSET(OS_NOFREE) && op->o_cur.str != NULL) free(op->o_cur.str); op->o_cur.str = str; } else op->o_cur.val = val; return (0); } /* * opts_empty -- * Return 1 if the string option is invalid, 0 if it's OK. * * PUBLIC: int opts_empty __P((SCR *, int, int)); */ int opts_empty(sp, off, silent) SCR *sp; int off, silent; { char *p; if ((p = O_STR(sp, off)) == NULL || p[0] == '\0') { if (!silent) msgq_str(sp, M_ERR, optlist[off].name, "305|No %s edit option specified"); return (1); } return (0); } /* * opts_dump -- * List the current values of selected options. * * PUBLIC: void opts_dump __P((SCR *, enum optdisp)); */ void opts_dump(sp, type) SCR *sp; enum optdisp type; { OPTLIST const *op; int base, b_num, cnt, col, colwidth, curlen, s_num; int numcols, numrows, row; int b_op[O_OPTIONCOUNT], s_op[O_OPTIONCOUNT]; char nbuf[20]; /* * Options are output in two groups -- those that fit in a column and * those that don't. Output is done on 6 character "tab" boundaries * for no particular reason. (Since we don't output tab characters, * we can ignore the terminal's tab settings.) Ignore the user's tab * setting because we have no idea how reasonable it is. * * Find a column width we can live with, testing from 10 columns to 1. */ for (numcols = 10; numcols > 1; --numcols) { colwidth = sp->cols / numcols & ~(STANDARD_TAB - 1); if (colwidth >= 10) { colwidth = (colwidth + STANDARD_TAB) & ~(STANDARD_TAB - 1); numcols = sp->cols / colwidth; break; } colwidth = 0; } /* * Get the set of options to list, entering them into * the column list or the overflow list. */ for (b_num = s_num = 0, op = optlist; op->name != NULL; ++op) { cnt = op - optlist; /* If OPT_NDISP set, it's never displayed. */ if (F_ISSET(op, OPT_NDISP)) continue; switch (type) { case ALL_DISPLAY: /* Display all. */ break; case CHANGED_DISPLAY: /* Display changed. */ /* If OPT_ADISP set, it's always "changed". */ if (F_ISSET(op, OPT_ADISP)) break; switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: case OPT_NUM: if (O_VAL(sp, cnt) == O_D_VAL(sp, cnt)) continue; break; case OPT_STR: if (O_STR(sp, cnt) == O_D_STR(sp, cnt) || O_D_STR(sp, cnt) != NULL && !strcmp(O_STR(sp, cnt), O_D_STR(sp, cnt))) continue; break; } break; case SELECT_DISPLAY: /* Display selected. */ if (!F_ISSET(&sp->opts[cnt], OPT_SELECTED)) continue; break; default: case NO_DISPLAY: abort(); } F_CLR(&sp->opts[cnt], OPT_SELECTED); curlen = strlen(op->name); switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: if (!O_ISSET(sp, cnt)) curlen += 2; break; case OPT_NUM: (void)snprintf(nbuf, sizeof(nbuf), "%ld", O_VAL(sp, cnt)); curlen += strlen(nbuf); break; case OPT_STR: if (O_STR(sp, cnt) != NULL) curlen += strlen(O_STR(sp, cnt)); curlen += 3; break; } /* Offset by 2 so there's a gap. */ if (curlen <= colwidth - 2) s_op[s_num++] = cnt; else b_op[b_num++] = cnt; } if (s_num > 0) { /* Figure out the number of rows. */ if (s_num > numcols) { numrows = s_num / numcols; if (s_num % numcols) ++numrows; } else numrows = 1; /* Display the options in sorted order. */ for (row = 0; row < numrows;) { for (base = row, col = 0; col < numcols; ++col) { cnt = opts_print(sp, &optlist[s_op[base]]); if ((base += numrows) >= s_num) break; (void)ex_printf(sp, "%*s", (int)(colwidth - cnt), ""); } if (++row < numrows || b_num) (void)ex_puts(sp, "\n"); } } for (row = 0; row < b_num;) { (void)opts_print(sp, &optlist[b_op[row]]); if (++row < b_num) (void)ex_puts(sp, "\n"); } (void)ex_puts(sp, "\n"); } /* * opts_print -- * Print out an option. */ static int opts_print(sp, op) SCR *sp; OPTLIST const *op; { int curlen, offset; curlen = 0; offset = op - optlist; switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: curlen += ex_printf(sp, "%s%s", O_ISSET(sp, offset) ? "" : "no", op->name); break; case OPT_NUM: curlen += ex_printf(sp, "%s=%ld", op->name, O_VAL(sp, offset)); break; case OPT_STR: curlen += ex_printf(sp, "%s=\"%s\"", op->name, O_STR(sp, offset) == NULL ? "" : O_STR(sp, offset)); break; } return (curlen); } /* * opts_save -- * Write the current configuration to a file. * * PUBLIC: int opts_save __P((SCR *, FILE *)); */ int opts_save(sp, fp) SCR *sp; FILE *fp; { OPTLIST const *op; int ch, cnt; char *p; for (op = optlist; op->name != NULL; ++op) { if (F_ISSET(op, OPT_NOSAVE)) continue; cnt = op - optlist; switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: if (O_ISSET(sp, cnt)) (void)fprintf(fp, "set %s\n", op->name); else (void)fprintf(fp, "set no%s\n", op->name); break; case OPT_NUM: (void)fprintf(fp, "set %s=%-3ld\n", op->name, O_VAL(sp, cnt)); break; case OPT_STR: if (O_STR(sp, cnt) == NULL) break; (void)fprintf(fp, "set "); for (p = op->name; (ch = *p) != '\0'; ++p) { if (isblank(ch) || ch == '\\') (void)putc('\\', fp); (void)putc(ch, fp); } (void)putc('=', fp); for (p = O_STR(sp, cnt); (ch = *p) != '\0'; ++p) { if (isblank(ch) || ch == '\\') (void)putc('\\', fp); (void)putc(ch, fp); } (void)putc('\n', fp); break; } if (ferror(fp)) { msgq(sp, M_SYSERR, NULL); return (1); } } return (0); } /* * opts_search -- * Search for an option. * * PUBLIC: OPTLIST const *opts_search __P((char *)); */ OPTLIST const * opts_search(name) char *name; { OPTLIST const *op, *found; OABBREV atmp, *ap; OPTLIST otmp; size_t len; /* Check list of abbreviations. */ atmp.name = name; if ((ap = bsearch(&atmp, abbrev, sizeof(abbrev) / sizeof(OABBREV) - 1, sizeof(OABBREV), opts_abbcmp)) != NULL) return (optlist + ap->offset); /* Check list of options. */ otmp.name = name; if ((op = bsearch(&otmp, optlist, sizeof(optlist) / sizeof(OPTLIST) - 1, sizeof(OPTLIST), opts_cmp)) != NULL) return (op); /* * Check to see if the name is the prefix of one (and only one) * option. If so, return the option. */ len = strlen(name); for (found = NULL, op = optlist; op->name != NULL; ++op) { if (op->name[0] < name[0]) continue; if (op->name[0] > name[0]) break; if (!memcmp(op->name, name, len)) { if (found != NULL) return (NULL); found = op; } } return (found); } /* * opts_nomatch -- * Standard nomatch error message for options. * * PUBLIC: void opts_nomatch __P((SCR *, char *)); */ void opts_nomatch(sp, name) SCR *sp; char *name; { msgq_str(sp, M_ERR, name, "033|set: no %s option: 'set all' gives all option values"); } static int opts_abbcmp(a, b) const void *a, *b; { return(strcmp(((OABBREV *)a)->name, ((OABBREV *)b)->name)); } static int opts_cmp(a, b) const void *a, *b; { return(strcmp(((OPTLIST *)a)->name, ((OPTLIST *)b)->name)); } /* * opts_copy -- * Copy a screen's OPTION array. * * PUBLIC: int opts_copy __P((SCR *, SCR *)); */ int opts_copy(orig, sp) SCR *orig, *sp; { int cnt, rval; /* Copy most everything without change. */ memcpy(sp->opts, orig->opts, sizeof(orig->opts)); /* Copy the string edit options. */ for (cnt = rval = 0; cnt < O_OPTIONCOUNT; ++cnt) { if (optlist[cnt].type != OPT_STR || F_ISSET(&optlist[cnt], OPT_GLOBAL)) continue; /* * If never set, or already failed, NULL out the entries -- * have to continue after failure, otherwise would have two * screens referencing the same memory. */ if (rval || O_STR(sp, cnt) == NULL) { o_set(sp, cnt, OS_NOFREE | OS_STR, NULL, 0); o_set(sp, cnt, OS_DEF | OS_NOFREE | OS_STR, NULL, 0); continue; } /* Copy the current string. */ if (o_set(sp, cnt, OS_NOFREE | OS_STRDUP, O_STR(sp, cnt), 0)) { o_set(sp, cnt, OS_DEF | OS_NOFREE | OS_STR, NULL, 0); goto nomem; } /* Copy the default string. */ if (O_D_STR(sp, cnt) != NULL && o_set(sp, cnt, OS_DEF | OS_NOFREE | OS_STRDUP, O_D_STR(sp, cnt), 0)) { nomem: msgq(orig, M_SYSERR, NULL); rval = 1; } } return (rval); } /* * opts_free -- * Free all option strings * * PUBLIC: void opts_free __P((SCR *)); */ void opts_free(sp) SCR *sp; { int cnt; for (cnt = 0; cnt < O_OPTIONCOUNT; ++cnt) { if (optlist[cnt].type != OPT_STR || F_ISSET(&optlist[cnt], OPT_GLOBAL)) continue; if (O_STR(sp, cnt) != NULL) free(O_STR(sp, cnt)); if (O_D_STR(sp, cnt) != NULL) free(O_D_STR(sp, cnt)); } } vigor-0.016.orig/common/options.h0100644000076400007640000000712007103707216015425 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)options.h 10.19 (Berkeley) 10/10/96 */ /* * Edit option information. Historically, if you set a boolean or numeric * edit option value to its "default" value, it didn't show up in the :set * display, i.e. it wasn't considered "changed". String edit options would * show up as changed, regardless. We maintain a parallel set of values * which are the default values and never consider an edit option changed * if it was reset to the default value. * * Macros to retrieve boolean, integral and string option values, and to * set, clear and test boolean option values. Some options (secure, lines, * columns, terminal type) are global in scope, and are therefore stored * in the global area. The offset in the global options array is stored * in the screen's value field. This is set up when the options are first * initialized. */ #define O_V(sp, o, fld) \ (F_ISSET(&(sp)->opts[(o)], OPT_GLOBAL) ? \ (sp)->gp->opts[(sp)->opts[(o)].o_cur.val].fld : \ (sp)->opts[(o)].fld) /* Global option macros. */ #define OG_CLR(gp, o) ((gp)->opts[(o)].o_cur.val) = 0 #define OG_SET(gp, o) ((gp)->opts[(o)].o_cur.val) = 1 #define OG_STR(gp, o) ((gp)->opts[(o)].o_cur.str) #define OG_VAL(gp, o) ((gp)->opts[(o)].o_cur.val) #define OG_ISSET(gp, o) OG_VAL(gp, o) #define OG_D_STR(gp, o) ((gp)->opts[(o)].o_def.str) #define OG_D_VAL(gp, o) ((gp)->opts[(o)].o_def.val) /* * Flags to o_set(); need explicit OS_STR as can be setting the value to * NULL. */ #define OS_DEF 0x01 /* Set the default value. */ #define OS_NOFREE 0x02 /* Don't free the old string. */ #define OS_STR 0x04 /* Set to string argument. */ #define OS_STRDUP 0x08 /* Copy then set to string argument. */ struct _option { union { u_long val; /* Value or boolean. */ char *str; /* String. */ } o_cur; #define O_CLR(sp, o) o_set(sp, o, 0, NULL, 0) #define O_SET(sp, o) o_set(sp, o, 0, NULL, 1) #define O_STR(sp, o) O_V(sp, o, o_cur.str) #define O_VAL(sp, o) O_V(sp, o, o_cur.val) #define O_ISSET(sp, o) O_VAL(sp, o) union { u_long val; /* Value or boolean. */ char *str; /* String. */ } o_def; #define O_D_CLR(sp, o) o_set(sp, o, OS_DEF, NULL, 0) #define O_D_SET(sp, o) o_set(sp, o, OS_DEF, NULL, 1) #define O_D_STR(sp, o) O_V(sp, o, o_def.str) #define O_D_VAL(sp, o) O_V(sp, o, o_def.val) #define O_D_ISSET(sp, o) O_D_VAL(sp, o) #define OPT_GLOBAL 0x01 /* Option is global. */ #define OPT_SELECTED 0x02 /* Selected for display. */ u_int8_t flags; }; /* List of option names, associated update functions and information. */ struct _optlist { char *name; /* Name. */ /* Change function. */ int (*func) __P((SCR *, OPTION *, char *, u_long *)); /* Type of object. */ enum { OPT_0BOOL, OPT_1BOOL, OPT_NUM, OPT_STR } type; #define OPT_ADISP 0x001 /* Always display the option. */ #define OPT_ALWAYS 0x002 /* Always call the support function. */ #define OPT_NDISP 0x004 /* Never display the option. */ #define OPT_NOSAVE 0x008 /* Mkexrc command doesn't save. */ #define OPT_NOSET 0x010 /* Option may not be set. */ #define OPT_NOUNSET 0x020 /* Option may not be unset. */ #define OPT_NOZERO 0x040 /* Option may not be set to 0. */ u_int8_t flags; }; /* Option argument to opts_dump(). */ enum optdisp { NO_DISPLAY, ALL_DISPLAY, CHANGED_DISPLAY, SELECT_DISPLAY }; /* Options array. */ extern OPTLIST const optlist[]; #include "options_def.h" vigor-0.016.orig/common/options_f.c0100644000076400007640000001521107103707216015725 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)options_f.c 10.25 (Berkeley) 7/12/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "common.h" /* * PUBLIC: int f_altwerase __P((SCR *, OPTION *, char *, u_long *)); */ int f_altwerase(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { if (!*valp) O_CLR(sp, O_TTYWERASE); return (0); } /* * PUBLIC: int f_columns __P((SCR *, OPTION *, char *, u_long *)); */ int f_columns(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { /* Validate the number. */ if (*valp < MINIMUM_SCREEN_COLS) { msgq(sp, M_ERR, "040|Screen columns too small, less than %d", MINIMUM_SCREEN_COLS); return (1); } /* * !!! * It's not uncommon for allocation of huge chunks of memory to cause * core dumps on various systems. So, we prune out numbers that are * "obviously" wrong. Vi will not work correctly if it has the wrong * number of lines/columns for the screen, but at least we don't drop * core. */ #define MAXIMUM_SCREEN_COLS 500 if (*valp > MAXIMUM_SCREEN_COLS) { msgq(sp, M_ERR, "041|Screen columns too large, greater than %d", MAXIMUM_SCREEN_COLS); return (1); } return (0); } /* * PUBLIC: int f_lines __P((SCR *, OPTION *, char *, u_long *)); */ int f_lines(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { /* Validate the number. */ if (*valp < MINIMUM_SCREEN_ROWS) { msgq(sp, M_ERR, "042|Screen lines too small, less than %d", MINIMUM_SCREEN_ROWS); return (1); } /* * !!! * It's not uncommon for allocation of huge chunks of memory to cause * core dumps on various systems. So, we prune out numbers that are * "obviously" wrong. Vi will not work correctly if it has the wrong * number of lines/columns for the screen, but at least we don't drop * core. */ #define MAXIMUM_SCREEN_ROWS 500 if (*valp > MAXIMUM_SCREEN_ROWS) { msgq(sp, M_ERR, "043|Screen lines too large, greater than %d", MAXIMUM_SCREEN_ROWS); return (1); } /* * Set the value, and the related scroll value. If no window * value set, set a new default window. */ o_set(sp, O_LINES, 0, NULL, *valp); if (*valp == 1) { sp->defscroll = 1; if (O_VAL(sp, O_WINDOW) == O_D_VAL(sp, O_WINDOW) || O_VAL(sp, O_WINDOW) > *valp) { o_set(sp, O_WINDOW, 0, NULL, 1); o_set(sp, O_WINDOW, OS_DEF, NULL, 1); } } else { sp->defscroll = (*valp - 1) / 2; if (O_VAL(sp, O_WINDOW) == O_D_VAL(sp, O_WINDOW) || O_VAL(sp, O_WINDOW) > *valp) { o_set(sp, O_WINDOW, 0, NULL, *valp - 1); o_set(sp, O_WINDOW, OS_DEF, NULL, *valp - 1); } } return (0); } /* * PUBLIC: int f_lisp __P((SCR *, OPTION *, char *, u_long *)); */ int f_lisp(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { msgq(sp, M_ERR, "044|The lisp option is not implemented"); return (0); } /* * PUBLIC: int f_msgcat __P((SCR *, OPTION *, char *, u_long *)); */ int f_msgcat(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { (void)msg_open(sp, str); return (0); } /* * PUBLIC: int f_paragraph __P((SCR *, OPTION *, char *, u_long *)); */ int f_paragraph(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { if (strlen(str) & 1) { msgq(sp, M_ERR, "048|The paragraph option must be in two character groups"); return (1); } return (0); } /* * PUBLIC: int f_print __P((SCR *, OPTION *, char *, u_long *)); */ int f_print(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { /* Reinitialize the key fast lookup table. */ v_key_ilookup(sp); /* Reformat the screen. */ F_SET(sp, SC_SCR_REFORMAT); return (0); } /* * PUBLIC: int f_readonly __P((SCR *, OPTION *, char *, u_long *)); */ int f_readonly(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { /* * !!! * See the comment in exf.c. */ if (*valp) F_CLR(sp, SC_READONLY); else F_SET(sp, SC_READONLY); return (0); } /* * PUBLIC: int f_recompile __P((SCR *, OPTION *, char *, u_long *)); */ int f_recompile(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { if (F_ISSET(sp, SC_RE_SEARCH)) { regfree(&sp->re_c); F_CLR(sp, SC_RE_SEARCH); } if (F_ISSET(sp, SC_RE_SUBST)) { regfree(&sp->subre_c); F_CLR(sp, SC_RE_SUBST); } return (0); } /* * PUBLIC: int f_reformat __P((SCR *, OPTION *, char *, u_long *)); */ int f_reformat(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { F_SET(sp, SC_SCR_REFORMAT); return (0); } /* * PUBLIC: int f_section __P((SCR *, OPTION *, char *, u_long *)); */ int f_section(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { if (strlen(str) & 1) { msgq(sp, M_ERR, "049|The section option must be in two character groups"); return (1); } return (0); } /* * PUBLIC: int f_ttywerase __P((SCR *, OPTION *, char *, u_long *)); */ int f_ttywerase(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { if (!*valp) O_CLR(sp, O_ALTWERASE); return (0); } /* * PUBLIC: int f_w300 __P((SCR *, OPTION *, char *, u_long *)); */ int f_w300(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { u_long v; /* Historical behavior for w300 was < 1200. */ if (sp->gp->scr_baud(sp, &v)) return (1); if (v >= 1200) return (0); return (f_window(sp, op, str, valp)); } /* * PUBLIC: int f_w1200 __P((SCR *, OPTION *, char *, u_long *)); */ int f_w1200(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { u_long v; /* Historical behavior for w1200 was == 1200. */ if (sp->gp->scr_baud(sp, &v)) return (1); if (v < 1200 || v > 4800) return (0); return (f_window(sp, op, str, valp)); } /* * PUBLIC: int f_w9600 __P((SCR *, OPTION *, char *, u_long *)); */ int f_w9600(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { u_long v; /* Historical behavior for w9600 was > 1200. */ if (sp->gp->scr_baud(sp, &v)) return (1); if (v <= 4800) return (0); return (f_window(sp, op, str, valp)); } /* * PUBLIC: int f_window __P((SCR *, OPTION *, char *, u_long *)); */ int f_window(sp, op, str, valp) SCR *sp; OPTION *op; char *str; u_long *valp; { if (*valp >= O_VAL(sp, O_LINES) - 1 && (*valp = O_VAL(sp, O_LINES) - 1) == 0) *valp = 1; return (0); } vigor-0.016.orig/common/put.c0100644000076400007640000001375207103707216014545 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)put.c 10.11 (Berkeley) 9/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "common.h" /* * put -- * Put text buffer contents into the file. * * PUBLIC: int put __P((SCR *, CB *, CHAR_T *, MARK *, MARK *, int)); */ int put(sp, cbp, namep, cp, rp, append) SCR *sp; CB *cbp; CHAR_T *namep; MARK *cp, *rp; int append; { CHAR_T name; TEXT *ltp, *tp; recno_t lno; size_t blen, clen, len; int rval; char *bp, *p, *t; if (cbp == NULL) if (namep == NULL) { cbp = sp->gp->dcbp; if (cbp == NULL) { msgq(sp, M_ERR, "053|The default buffer is empty"); return (1); } } else { name = *namep; CBNAME(sp, cbp, name); if (cbp == NULL) { msgq(sp, M_ERR, "054|Buffer %s is empty", KEY_NAME(sp, name)); return (1); } } tp = cbp->textq.cqh_first; /* * It's possible to do a put into an empty file, meaning that the cut * buffer simply becomes the file. It's a special case so that we can * ignore it in general. * * !!! * Historically, pasting into a file with no lines in vi would preserve * the single blank line. This is surely a result of the fact that the * historic vi couldn't deal with a file that had no lines in it. This * implementation treats that as a bug, and does not retain the blank * line. * * Historical practice is that the cursor ends at the first character * in the file. */ if (cp->lno == 1) { if (db_last(sp, &lno)) return (1); if (lno == 0) { for (; tp != (void *)&cbp->textq; ++lno, ++sp->rptlines[L_ADDED], tp = tp->q.cqe_next) if (db_append(sp, 1, lno, tp->lb, tp->len)) return (1); rp->lno = 1; rp->cno = 0; return (0); } } /* If a line mode buffer, append each new line into the file. */ if (F_ISSET(cbp, CB_LMODE)) { lno = append ? cp->lno : cp->lno - 1; rp->lno = lno + 1; for (; tp != (void *)&cbp->textq; ++lno, ++sp->rptlines[L_ADDED], tp = tp->q.cqe_next) if (db_append(sp, 1, lno, tp->lb, tp->len)) return (1); rp->cno = 0; (void)nonblank(sp, rp->lno, &rp->cno); return (0); } /* * If buffer was cut in character mode, replace the current line with * one built from the portion of the first line to the left of the * split plus the first line in the CB. Append each intermediate line * in the CB. Append a line built from the portion of the first line * to the right of the split plus the last line in the CB. * * Get the first line. */ lno = cp->lno; if (db_get(sp, lno, DBG_FATAL, &p, &len)) return (1); GET_SPACE_RET(sp, bp, blen, tp->len + len + 1); t = bp; /* Original line, left of the split. */ if (len > 0 && (clen = cp->cno + (append ? 1 : 0)) > 0) { memcpy(bp, p, clen); p += clen; t += clen; } /* First line from the CB. */ if (tp->len != 0) { memcpy(t, tp->lb, tp->len); t += tp->len; } /* Calculate length left in the original line. */ clen = len == 0 ? 0 : len - (cp->cno + (append ? 1 : 0)); /* * !!! * In the historical 4BSD version of vi, character mode puts within * a single line have two cursor behaviors: if the put is from the * unnamed buffer, the cursor moves to the character inserted which * appears last in the file. If the put is from a named buffer, * the cursor moves to the character inserted which appears first * in the file. In System III/V, it was changed at some point and * the cursor always moves to the first character. In both versions * of vi, character mode puts that cross line boundaries leave the * cursor on the first character. Nvi implements the System III/V * behavior, and expect POSIX.2 to do so as well. */ rp->lno = lno; rp->cno = len == 0 ? 0 : sp->cno + (append && tp->len ? 1 : 0); /* * If no more lines in the CB, append the rest of the original * line and quit. Otherwise, build the last line before doing * the intermediate lines, because the line changes will lose * the cached line. */ if (tp->q.cqe_next == (void *)&cbp->textq) { if (clen > 0) { memcpy(t, p, clen); t += clen; } if (db_set(sp, lno, bp, t - bp)) goto err; if (sp->rptlchange != lno) { sp->rptlchange = lno; ++sp->rptlines[L_CHANGED]; } } else { /* * Have to build both the first and last lines of the * put before doing any sets or we'll lose the cached * line. Build both the first and last lines in the * same buffer, so we don't have to have another buffer * floating around. * * Last part of original line; check for space, reset * the pointer into the buffer. */ ltp = cbp->textq.cqh_last; len = t - bp; ADD_SPACE_RET(sp, bp, blen, ltp->len + clen); t = bp + len; /* Add in last part of the CB. */ memcpy(t, ltp->lb, ltp->len); if (clen) memcpy(t + ltp->len, p, clen); clen += ltp->len; /* * Now: bp points to the first character of the first * line, t points to the last character of the last * line, t - bp is the length of the first line, and * clen is the length of the last. Just figured you'd * want to know. * * Output the line replacing the original line. */ if (db_set(sp, lno, bp, t - bp)) goto err; if (sp->rptlchange != lno) { sp->rptlchange = lno; ++sp->rptlines[L_CHANGED]; } /* Output any intermediate lines in the CB. */ for (tp = tp->q.cqe_next; tp->q.cqe_next != (void *)&cbp->textq; ++lno, ++sp->rptlines[L_ADDED], tp = tp->q.cqe_next) if (db_append(sp, 1, lno, tp->lb, tp->len)) goto err; if (db_append(sp, 1, lno, t, clen)) goto err; ++sp->rptlines[L_ADDED]; } rval = 0; if (0) err: rval = 1; FREE_SPACE(sp, bp, blen); return (rval); } vigor-0.016.orig/common/recover.c0100644000076400007640000005353207103707216015402 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)recover.c 10.21 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include /* XXX: param.h may not have included types.h */ #include #include /* * We include , because the open #defines were found there * on historical systems. We also include because the open(2) * #defines are found there on newer systems. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "pathnames.h" /* * Recovery code. * * The basic scheme is as follows. In the EXF structure, we maintain full * paths of a b+tree file and a mail recovery file. The former is the file * used as backing store by the DB package. The latter is the file that * contains an email message to be sent to the user if we crash. The two * simple states of recovery are: * * + first starting the edit session: * the b+tree file exists and is mode 700, the mail recovery * file doesn't exist. * + after the file has been modified: * the b+tree file exists and is mode 600, the mail recovery * file exists, and is exclusively locked. * * In the EXF structure we maintain a file descriptor that is the locked * file descriptor for the mail recovery file. NOTE: we sometimes have to * do locking with fcntl(2). This is a problem because if you close(2) any * file descriptor associated with the file, ALL of the locks go away. Be * sure to remember that if you have to modify the recovery code. (It has * been rhetorically asked of what the designers could have been thinking * when they did that interface. The answer is simple: they weren't.) * * To find out if a recovery file/backing file pair are in use, try to get * a lock on the recovery file. * * To find out if a backing file can be deleted at boot time, check for an * owner execute bit. (Yes, I know it's ugly, but it's either that or put * special stuff into the backing file itself, or correlate the files at * boot time, neither of which looks like fun.) Note also that there's a * window between when the file is created and the X bit is set. It's small, * but it's there. To fix the window, check for 0 length files as well. * * To find out if a file can be recovered, check the F_RCV_ON bit. Note, * this DOES NOT mean that any initialization has been done, only that we * haven't yet failed at setting up or doing recovery. * * To preserve a recovery file/backing file pair, set the F_RCV_NORM bit. * If that bit is not set when ending a file session: * If the EXF structure paths (rcv_path and rcv_mpath) are not NULL, * they are unlink(2)'d, and free(3)'d. * If the EXF file descriptor (rcv_fd) is not -1, it is closed. * * The backing b+tree file is set up when a file is first edited, so that * the DB package can use it for on-disk caching and/or to snapshot the * file. When the file is first modified, the mail recovery file is created, * the backing file permissions are updated, the file is sync(2)'d to disk, * and the timer is started. Then, at RCV_PERIOD second intervals, the * b+tree file is synced to disk. RCV_PERIOD is measured using SIGALRM, which * means that the data structures (SCR, EXF, the underlying tree structures) * must be consistent when the signal arrives. * * The recovery mail file contains normal mail headers, with two additions, * which occur in THIS order, as the FIRST TWO headers: * * X-vi-recover-file: file_name * X-vi-recover-path: recover_path * * Since newlines delimit the headers, this means that file names cannot have * newlines in them, but that's probably okay. As these files aren't intended * to be long-lived, changing their format won't be too painful. * * Btree files are named "vi.XXXX" and recovery files are named "recover.XXXX". */ #define VI_FHEADER "X-vi-recover-file: " #define VI_PHEADER "X-vi-recover-path: " static int rcv_copy __P((SCR *, int, char *)); static void rcv_email __P((SCR *, char *)); static char *rcv_gets __P((char *, size_t, int)); static int rcv_mailfile __P((SCR *, int, char *)); static int rcv_mktemp __P((SCR *, char *, char *, int)); /* * rcv_tmp -- * Build a file name that will be used as the recovery file. * * PUBLIC: int rcv_tmp __P((SCR *, EXF *, char *)); */ int rcv_tmp(sp, ep, name) SCR *sp; EXF *ep; char *name; { struct stat sb; int fd; char *dp, *p, path[MAXPATHLEN]; /* * !!! * ep MAY NOT BE THE SAME AS sp->ep, DON'T USE THE LATTER. * * * If the recovery directory doesn't exist, try and create it. As * the recovery files are themselves protected from reading/writing * by other than the owner, the worst that can happen is that a user * would have permission to remove other user's recovery files. If * the sticky bit has the BSD semantics, that too will be impossible. */ if (opts_empty(sp, O_RECDIR, 0)) goto err; dp = O_STR(sp, O_RECDIR); if (stat(dp, &sb)) { if (errno != ENOENT || mkdir(dp, 0)) { msgq(sp, M_SYSERR, "%s", dp); goto err; } (void)chmod(dp, S_IRWXU | S_IRWXG | S_IRWXO | S_ISVTX); } /* Newlines delimit the mail messages. */ for (p = name; *p; ++p) if (*p == '\n') { msgq(sp, M_ERR, "055|Files with newlines in the name are unrecoverable"); goto err; } (void)snprintf(path, sizeof(path), "%s/vi.XXXXXX", dp); if ((fd = rcv_mktemp(sp, path, dp, S_IRWXU)) == -1) goto err; (void)close(fd); if ((ep->rcv_path = strdup(path)) == NULL) { msgq(sp, M_SYSERR, NULL); (void)unlink(path); err: msgq(sp, M_ERR, "056|Modifications not recoverable if the session fails"); return (1); } /* We believe the file is recoverable. */ F_SET(ep, F_RCV_ON); return (0); } /* * rcv_init -- * Force the file to be snapshotted for recovery. * * PUBLIC: int rcv_init __P((SCR *)); */ int rcv_init(sp) SCR *sp; { EXF *ep; recno_t lno; ep = sp->ep; /* Only do this once. */ F_CLR(ep, F_FIRSTMODIFY); /* If we already know the file isn't recoverable, we're done. */ if (!F_ISSET(ep, F_RCV_ON)) return (0); /* Turn off recoverability until we figure out if this will work. */ F_CLR(ep, F_RCV_ON); /* Test if we're recovering a file, not editing one. */ if (ep->rcv_mpath == NULL) { /* Build a file to mail to the user. */ if (rcv_mailfile(sp, 0, NULL)) goto err; /* Force a read of the entire file. */ if (db_last(sp, &lno)) goto err; /* Turn on a busy message, and sync it to backing store. */ sp->gp->scr_busy(sp, "057|Copying file for recovery...", BUSY_ON); if (ep->db->sync(ep->db, R_RECNOSYNC)) { msgq_str(sp, M_SYSERR, ep->rcv_path, "058|Preservation failed: %s"); sp->gp->scr_busy(sp, NULL, BUSY_OFF); goto err; } sp->gp->scr_busy(sp, NULL, BUSY_OFF); } /* Turn off the owner execute bit. */ (void)chmod(ep->rcv_path, S_IRUSR | S_IWUSR); /* We believe the file is recoverable. */ F_SET(ep, F_RCV_ON); return (0); err: msgq(sp, M_ERR, "059|Modifications not recoverable if the session fails"); return (1); } /* * rcv_sync -- * Sync the file, optionally: * flagging the backup file to be preserved * snapshotting the backup file and send email to the user * sending email to the user if the file was modified * ending the file session * * PUBLIC: int rcv_sync __P((SCR *, u_int)); */ int rcv_sync(sp, flags) SCR *sp; u_int flags; { EXF *ep; int fd, rval; char *dp, buf[1024]; /* Make sure that there's something to recover/sync. */ ep = sp->ep; if (ep == NULL || !F_ISSET(ep, F_RCV_ON)) return (0); /* Sync the file if it's been modified. */ if (F_ISSET(ep, F_MODIFIED)) { SIGBLOCK; if (ep->db->sync(ep->db, R_RECNOSYNC)) { F_CLR(ep, F_RCV_ON | F_RCV_NORM); msgq_str(sp, M_SYSERR, ep->rcv_path, "060|File backup failed: %s"); SIGUNBLOCK; return (1); } SIGUNBLOCK; /* REQUEST: don't remove backing file on exit. */ if (LF_ISSET(RCV_PRESERVE)) F_SET(ep, F_RCV_NORM); /* REQUEST: send email. */ if (LF_ISSET(RCV_EMAIL)) rcv_email(sp, ep->rcv_mpath); } /* * !!! * Each time the user exec's :preserve, we have to snapshot all of * the recovery information, i.e. it's like the user re-edited the * file. We copy the DB(3) backing file, and then create a new mail * recovery file, it's simpler than exiting and reopening all of the * underlying files. * * REQUEST: snapshot the file. */ rval = 0; if (LF_ISSET(RCV_SNAPSHOT)) { if (opts_empty(sp, O_RECDIR, 0)) goto err; dp = O_STR(sp, O_RECDIR); (void)snprintf(buf, sizeof(buf), "%s/vi.XXXXXX", dp); if ((fd = rcv_mktemp(sp, buf, dp, S_IRUSR | S_IWUSR)) == -1) goto err; sp->gp->scr_busy(sp, "061|Copying file for recovery...", BUSY_ON); if (rcv_copy(sp, fd, ep->rcv_path) || close(fd) || rcv_mailfile(sp, 1, buf)) { (void)unlink(buf); (void)close(fd); rval = 1; } sp->gp->scr_busy(sp, NULL, BUSY_OFF); } if (0) { err: rval = 1; } /* REQUEST: end the file session. */ if (LF_ISSET(RCV_ENDSESSION) && file_end(sp, NULL, 1)) rval = 1; return (rval); } /* * rcv_mailfile -- * Build the file to mail to the user. */ static int rcv_mailfile(sp, issync, cp_path) SCR *sp; int issync; char *cp_path; { EXF *ep; GS *gp; struct passwd *pw; size_t len; time_t now; uid_t uid; int fd; char *dp, *p, *t, buf[4096], mpath[MAXPATHLEN]; char *t1, *t2, *t3; /* * XXX * MAXHOSTNAMELEN is in various places on various systems, including * and . If not found, use a large default. */ #ifndef MAXHOSTNAMELEN #define MAXHOSTNAMELEN 1024 #endif char host[MAXHOSTNAMELEN]; gp = sp->gp; if ((pw = getpwuid(uid = getuid())) == NULL) { msgq(sp, M_ERR, "062|Information on user id %u not found", uid); return (1); } if (opts_empty(sp, O_RECDIR, 0)) return (1); dp = O_STR(sp, O_RECDIR); (void)snprintf(mpath, sizeof(mpath), "%s/recover.XXXXXX", dp); if ((fd = rcv_mktemp(sp, mpath, dp, S_IRUSR | S_IWUSR)) == -1) return (1); /* * XXX * We keep an open lock on the file so that the recover option can * distinguish between files that are live and those that need to * be recovered. There's an obvious window between the mkstemp call * and the lock, but it's pretty small. */ ep = sp->ep; if (file_lock(sp, NULL, NULL, fd, 1) != LOCK_SUCCESS) msgq(sp, M_SYSERR, "063|Unable to lock recovery file"); if (!issync) { /* Save the recover file descriptor, and mail path. */ ep->rcv_fd = fd; if ((ep->rcv_mpath = strdup(mpath)) == NULL) { msgq(sp, M_SYSERR, NULL); goto err; } cp_path = ep->rcv_path; } /* * XXX * We can't use stdio(3) here. The problem is that we may be using * fcntl(2), so if ANY file descriptor into the file is closed, the * lock is lost. So, we could never close the FILE *, even if we * dup'd the fd first. */ t = sp->frp->name; if ((p = strrchr(t, '/')) == NULL) p = t; else ++p; (void)time(&now); (void)gethostname(host, sizeof(host)); len = snprintf(buf, sizeof(buf), "%s%s\n%s%s\n%s\n%s\n%s%s\n%s%s\n%s\n\n", VI_FHEADER, t, /* Non-standard. */ VI_PHEADER, cp_path, /* Non-standard. */ "Reply-To: root", "From: root (Nvi recovery program)", "To: ", pw->pw_name, "Subject: Nvi saved the file ", p, "Precedence: bulk"); /* For vacation(1). */ if (len > sizeof(buf) - 1) goto lerr; if (write(fd, buf, len) != len) goto werr; len = snprintf(buf, sizeof(buf), "%s%.24s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n\n", "On ", ctime(&now), ", the user ", pw->pw_name, " was editing a file named ", t, " on the machine ", host, ", when it was saved for recovery. ", "You can recover most, if not all, of the changes ", "to this file using the -r option to ", gp->progname, ":\n\n\t", gp->progname, " -r ", t); if (len > sizeof(buf) - 1) { lerr: msgq(sp, M_ERR, "064|Recovery file buffer overrun"); goto err; } /* * Format the message. (Yes, I know it's silly.) * Requires that the message end in a . */ #define FMTCOLS 60 for (t1 = buf; len > 0; len -= t2 - t1, t1 = t2) { /* Check for a short length. */ if (len <= FMTCOLS) { t2 = t1 + (len - 1); goto wout; } /* Check for a required . */ t2 = strchr(t1, '\n'); if (t2 - t1 <= FMTCOLS) goto wout; /* Find the closest space, if any. */ for (t3 = t2; t2 > t1; --t2) if (*t2 == ' ') { if (t2 - t1 <= FMTCOLS) goto wout; t3 = t2; } t2 = t3; /* t2 points to the last character to display. */ wout: *t2++ = '\n'; /* t2 points one after the last character to display. */ if (write(fd, t1, t2 - t1) != t2 - t1) goto werr; } if (issync) { rcv_email(sp, mpath); if (close(fd)) { werr: msgq(sp, M_SYSERR, "065|Recovery file"); goto err; } } return (0); err: if (!issync) ep->rcv_fd = -1; if (fd != -1) (void)close(fd); return (1); } /* * people making love * never exactly the same * just like a snowflake * * rcv_list -- * List the files that can be recovered by this user. * * PUBLIC: int rcv_list __P((SCR *)); */ int rcv_list(sp) SCR *sp; { struct dirent *dp; struct stat sb; DIR *dirp; FILE *fp; int found; char *p, *t, file[MAXPATHLEN], path[MAXPATHLEN]; /* Open the recovery directory for reading. */ if (opts_empty(sp, O_RECDIR, 0)) return (1); p = O_STR(sp, O_RECDIR); if (chdir(p) || (dirp = opendir(".")) == NULL) { msgq_str(sp, M_SYSERR, p, "recdir: %s"); return (1); } /* Read the directory. */ for (found = 0; (dp = readdir(dirp)) != NULL;) { if (strncmp(dp->d_name, "recover.", 8)) continue; /* * If it's readable, it's recoverable. * * XXX * Should be "r", we don't want to write the file. However, * if we're using fcntl(2), there's no way to lock a file * descriptor that's not open for writing. */ if ((fp = fopen(dp->d_name, "r+")) == NULL) continue; switch (file_lock(sp, NULL, NULL, fileno(fp), 1)) { case LOCK_FAILED: /* * XXX * Assume that a lock can't be acquired, but that we * should permit recovery anyway. If this is wrong, * and someone else is using the file, we're going to * die horribly. */ break; case LOCK_SUCCESS: break; case LOCK_UNAVAIL: /* If it's locked, it's live. */ (void)fclose(fp); continue; } /* Check the headers. */ if (fgets(file, sizeof(file), fp) == NULL || strncmp(file, VI_FHEADER, sizeof(VI_FHEADER) - 1) || (p = strchr(file, '\n')) == NULL || fgets(path, sizeof(path), fp) == NULL || strncmp(path, VI_PHEADER, sizeof(VI_PHEADER) - 1) || (t = strchr(path, '\n')) == NULL) { msgq_str(sp, M_ERR, dp->d_name, "066|%s: malformed recovery file"); goto next; } *p = *t = '\0'; /* * If the file doesn't exist, it's an orphaned recovery file, * toss it. * * XXX * This can occur if the backup file was deleted and we crashed * before deleting the email file. */ errno = 0; if (stat(path + sizeof(VI_PHEADER) - 1, &sb) && errno == ENOENT) { (void)unlink(dp->d_name); goto next; } /* Get the last modification time and display. */ (void)fstat(fileno(fp), &sb); (void)printf("%.24s: %s\n", ctime(&sb.st_mtime), file + sizeof(VI_FHEADER) - 1); found = 1; /* Close, discarding lock. */ next: (void)fclose(fp); } if (found == 0) (void)printf("vi: no files to recover.\n"); (void)closedir(dirp); return (0); } /* * rcv_read -- * Start a recovered file as the file to edit. * * PUBLIC: int rcv_read __P((SCR *, FREF *)); */ int rcv_read(sp, frp) SCR *sp; FREF *frp; { struct dirent *dp; struct stat sb; DIR *dirp; EXF *ep; time_t rec_mtime; int fd, found, locked, requested, sv_fd; char *name, *p, *t, *rp, *recp, *pathp; char file[MAXPATHLEN], path[MAXPATHLEN], recpath[MAXPATHLEN]; if (opts_empty(sp, O_RECDIR, 0)) return (1); rp = O_STR(sp, O_RECDIR); if ((dirp = opendir(rp)) == NULL) { msgq_str(sp, M_ERR, rp, "%s"); return (1); } name = frp->name; sv_fd = -1; rec_mtime = 0; recp = pathp = NULL; for (found = requested = 0; (dp = readdir(dirp)) != NULL;) { if (strncmp(dp->d_name, "recover.", 8)) continue; (void)snprintf(recpath, sizeof(recpath), "%s/%s", rp, dp->d_name); /* * If it's readable, it's recoverable. It would be very * nice to use stdio(3), but, we can't because that would * require closing and then reopening the file so that we * could have a lock and still close the FP. Another tip * of the hat to fcntl(2). * * XXX * Should be O_RDONLY, we don't want to write it. However, * if we're using fcntl(2), there's no way to lock a file * descriptor that's not open for writing. */ if ((fd = open(recpath, O_RDWR, 0)) == -1) continue; switch (file_lock(sp, NULL, NULL, fd, 1)) { case LOCK_FAILED: /* * XXX * Assume that a lock can't be acquired, but that we * should permit recovery anyway. If this is wrong, * and someone else is using the file, we're going to * die horribly. */ locked = 0; break; case LOCK_SUCCESS: locked = 1; break; case LOCK_UNAVAIL: /* If it's locked, it's live. */ (void)close(fd); continue; } /* Check the headers. */ if (rcv_gets(file, sizeof(file), fd) == NULL || strncmp(file, VI_FHEADER, sizeof(VI_FHEADER) - 1) || (p = strchr(file, '\n')) == NULL || rcv_gets(path, sizeof(path), fd) == NULL || strncmp(path, VI_PHEADER, sizeof(VI_PHEADER) - 1) || (t = strchr(path, '\n')) == NULL) { msgq_str(sp, M_ERR, recpath, "067|%s: malformed recovery file"); goto next; } *p = *t = '\0'; ++found; /* * If the file doesn't exist, it's an orphaned recovery file, * toss it. * * XXX * This can occur if the backup file was deleted and we crashed * before deleting the email file. */ errno = 0; if (stat(path + sizeof(VI_PHEADER) - 1, &sb) && errno == ENOENT) { (void)unlink(dp->d_name); goto next; } /* Check the file name. */ if (strcmp(file + sizeof(VI_FHEADER) - 1, name)) goto next; ++requested; /* * If we've found more than one, take the most recent. * * XXX * Since we're using st_mtime, for portability reasons, * we only get a single second granularity, instead of * getting it right. */ (void)fstat(fd, &sb); if (recp == NULL || rec_mtime < sb.st_mtime) { p = recp; t = pathp; if ((recp = strdup(recpath)) == NULL) { msgq(sp, M_SYSERR, NULL); recp = p; goto next; } if ((pathp = strdup(path)) == NULL) { msgq(sp, M_SYSERR, NULL); free(recp); recp = p; pathp = t; goto next; } if (p != NULL) { free(p); free(t); } rec_mtime = sb.st_mtime; if (sv_fd != -1) (void)close(sv_fd); sv_fd = fd; } else next: (void)close(fd); } (void)closedir(dirp); if (recp == NULL) { msgq_str(sp, M_INFO, name, "068|No files named %s, readable by you, to recover"); return (1); } if (found) { if (requested > 1) msgq(sp, M_INFO, "069|There are older versions of this file for you to recover"); if (found > requested) msgq(sp, M_INFO, "070|There are other files for you to recover"); } /* * Create the FREF structure, start the btree file. * * XXX * file_init() is going to set ep->rcv_path. */ if (file_init(sp, frp, pathp + sizeof(VI_PHEADER) - 1, 0)) { free(recp); free(pathp); (void)close(sv_fd); return (1); } /* * We keep an open lock on the file so that the recover option can * distinguish between files that are live and those that need to * be recovered. The lock is already acquired, just copy it. */ ep = sp->ep; ep->rcv_mpath = recp; ep->rcv_fd = sv_fd; if (!locked) F_SET(frp, FR_UNLOCKED); /* We believe the file is recoverable. */ F_SET(ep, F_RCV_ON); return (0); } /* * rcv_copy -- * Copy a recovery file. */ static int rcv_copy(sp, wfd, fname) SCR *sp; int wfd; char *fname; { int nr, nw, off, rfd; char buf[8 * 1024]; if ((rfd = open(fname, O_RDONLY, 0)) == -1) goto err; while ((nr = read(rfd, buf, sizeof(buf))) > 0) for (off = 0; nr; nr -= nw, off += nw) if ((nw = write(wfd, buf + off, nr)) < 0) goto err; if (nr == 0) return (0); err: msgq_str(sp, M_SYSERR, fname, "%s"); return (1); } /* * rcv_gets -- * Fgets(3) for a file descriptor. */ static char * rcv_gets(buf, len, fd) char *buf; size_t len; int fd; { int nr; char *p; if ((nr = read(fd, buf, len - 1)) == -1) return (NULL); if ((p = strchr(buf, '\n')) == NULL) return (NULL); (void)lseek(fd, (off_t)((p - buf) + 1), SEEK_SET); return (buf); } /* * rcv_mktemp -- * Paranoid make temporary file routine. */ static int rcv_mktemp(sp, path, dname, perms) SCR *sp; char *path, *dname; int perms; { int fd; /* * !!! * We expect mkstemp(3) to set the permissions correctly. On * historic System V systems, mkstemp didn't. Do it here, on * GP's. * * XXX * The variable perms should really be a mode_t, and it would * be nice to use fchmod(2) instead of chmod(2), here. */ if ((fd = mkstemp(path)) == -1) msgq_str(sp, M_SYSERR, dname, "%s"); else (void)chmod(path, perms); return (fd); } /* * rcv_email -- * Send email. */ static void rcv_email(sp, fname) SCR *sp; char *fname; { struct stat sb; char buf[MAXPATHLEN * 2 + 20]; if (_PATH_SENDMAIL[0] != '/' || stat(_PATH_SENDMAIL, &sb)) msgq_str(sp, M_SYSERR, _PATH_SENDMAIL, "071|not sending email: %s"); else { /* * !!! * If you need to port this to a system that doesn't have * sendmail, the -t flag causes sendmail to read the message * for the recipients instead of specifying them some other * way. */ (void)snprintf(buf, sizeof(buf), "%s -t < %s", _PATH_SENDMAIL, fname); (void)system(buf); } } vigor-0.016.orig/common/screen.c0100644000076400007640000001150307103707216015204 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)screen.c 10.15 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "common.h" #include "../vi/vi.h" /* * screen_init -- * Do the default initialization of an SCR structure. * * PUBLIC: int screen_init __P((GS *, SCR *, SCR **)); */ int screen_init(gp, orig, spp) GS *gp; SCR *orig, **spp; { SCR *sp; size_t len; *spp = NULL; CALLOC_RET(orig, sp, SCR *, 1, sizeof(SCR)); *spp = sp; /* INITIALIZED AT SCREEN CREATE. */ sp->id = ++gp->id; sp->refcnt = 1; sp->gp = gp; /* All ref the GS structure. */ sp->ccnt = 2; /* Anything > 1 */ /* * XXX * sp->defscroll is initialized by the opts_init() code because * we don't have the option information yet. */ CIRCLEQ_INIT(&sp->tiq); /* PARTIALLY OR COMPLETELY COPIED FROM PREVIOUS SCREEN. */ if (orig == NULL) { sp->searchdir = NOTSET; } else { /* Alternate file name. */ if (orig->alt_name != NULL && (sp->alt_name = strdup(orig->alt_name)) == NULL) goto mem; /* Last executed at buffer. */ if (F_ISSET(orig, SC_AT_SET)) { F_SET(sp, SC_AT_SET); sp->at_lbuf = orig->at_lbuf; } /* Retain searching/substitution information. */ sp->searchdir = orig->searchdir == NOTSET ? NOTSET : FORWARD; if (orig->re != NULL && (sp->re = v_strdup(sp, orig->re, orig->re_len)) == NULL) goto mem; sp->re_len = orig->re_len; if (orig->subre != NULL && (sp->subre = v_strdup(sp, orig->subre, orig->subre_len)) == NULL) goto mem; sp->subre_len = orig->subre_len; if (orig->repl != NULL && (sp->repl = v_strdup(sp, orig->repl, orig->repl_len)) == NULL) goto mem; sp->repl_len = orig->repl_len; if (orig->newl_len) { len = orig->newl_len * sizeof(size_t); MALLOC(sp, sp->newl, size_t *, len); if (sp->newl == NULL) { mem: msgq(orig, M_SYSERR, NULL); goto err; } sp->newl_len = orig->newl_len; sp->newl_cnt = orig->newl_cnt; memcpy(sp->newl, orig->newl, len); } if (opts_copy(orig, sp)) goto err; F_SET(sp, F_ISSET(orig, SC_EX | SC_VI)); } if (ex_screen_copy(orig, sp)) /* Ex. */ goto err; if (v_screen_copy(orig, sp)) /* Vi. */ goto err; *spp = sp; return (0); err: screen_end(sp); return (1); } /* * screen_end -- * Release a screen, no matter what had (and had not) been * initialized. * * PUBLIC: int screen_end __P((SCR *)); */ int screen_end(sp) SCR *sp; { int rval; /* If multiply referenced, just decrement the count and return. */ if (--sp->refcnt != 0) return (0); /* * Remove the screen from the displayed queue. * * If a created screen failed during initialization, it may not * be linked into the chain. */ if (sp->q.cqe_next != NULL) CIRCLEQ_REMOVE(&sp->gp->dq, sp, q); /* The screen is no longer real. */ F_CLR(sp, SC_SCR_EX | SC_SCR_VI); rval = 0; #ifdef HAVE_PERL_INTERP if (perl_screen_end(sp)) /* End perl. */ rval = 1; #endif if (v_screen_end(sp)) /* End vi. */ rval = 1; if (ex_screen_end(sp)) /* End ex. */ rval = 1; /* Free file names. */ { char **ap; if (!F_ISSET(sp, SC_ARGNOFREE) && sp->argv != NULL) { for (ap = sp->argv; *ap != NULL; ++ap) free(*ap); free(sp->argv); } } /* Free any text input. */ if (sp->tiq.cqh_first != NULL) text_lfree(&sp->tiq); /* Free alternate file name. */ if (sp->alt_name != NULL) free(sp->alt_name); /* Free up search information. */ if (sp->re != NULL) free(sp->re); if (F_ISSET(sp, SC_RE_SEARCH)) regfree(&sp->re_c); if (sp->subre != NULL) free(sp->subre); if (F_ISSET(sp, SC_RE_SUBST)) regfree(&sp->subre_c); if (sp->repl != NULL) free(sp->repl); if (sp->newl != NULL) free(sp->newl); /* Free all the options */ opts_free(sp); /* Free the screen itself. */ free(sp); return (rval); } /* * screen_next -- * Return the next screen in the queue. * * PUBLIC: SCR *screen_next __P((SCR *)); */ SCR * screen_next(sp) SCR *sp; { GS *gp; SCR *next; /* Try the display queue, without returning the current screen. */ gp = sp->gp; for (next = gp->dq.cqh_first; next != (void *)&gp->dq; next = next->q.cqe_next) if (next != sp) break; if (next != (void *)&gp->dq) return (next); /* Try the hidden queue; if found, move screen to the display queue. */ if (gp->hq.cqh_first != (void *)&gp->hq) { next = gp->hq.cqh_first; CIRCLEQ_REMOVE(&gp->hq, next, q); CIRCLEQ_INSERT_HEAD(&gp->dq, next, q); return (next); } return (NULL); } vigor-0.016.orig/common/screen.h0100644000076400007640000001761407103707216015222 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)screen.h 10.24 (Berkeley) 7/19/96 */ /* * There are minimum values that vi has to have to display a screen. The row * minimum is fixed at 1 (the svi code can share a line between the text line * and the colon command/message line). Column calculation is a lot trickier. * For example, you have to have enough columns to display the line number, * not to mention guaranteeing that tabstop and shiftwidth values are smaller * than the current column value. It's simpler to have a fixed value and not * worry about it. * * XXX * MINIMUM_SCREEN_COLS is almost certainly wrong. */ #define MINIMUM_SCREEN_ROWS 1 #define MINIMUM_SCREEN_COLS 20 /* * SCR -- * The screen structure. To the extent possible, all screen information * is stored in the various private areas. The only information here * is used by global routines or is shared by too many screens. */ struct _scr { /* INITIALIZED AT SCREEN CREATE. */ CIRCLEQ_ENTRY(_scr) q; /* Screens. */ int id; /* Screen id #. */ int refcnt; /* Reference count. */ GS *gp; /* Pointer to global area. */ SCR *nextdisp; /* Next display screen. */ SCR *ccl_parent; /* Colon command-line parent screen. */ EXF *ep; /* Screen's current EXF structure. */ FREF *frp; /* FREF being edited. */ char **argv; /* NULL terminated file name array. */ char **cargv; /* Current file name. */ u_long ccnt; /* Command count. */ u_long q_ccnt; /* Quit or ZZ command count. */ /* Screen's: */ size_t rows; /* 1-N: number of rows. */ size_t cols; /* 1-N: number of columns. */ size_t t_rows; /* 1-N: cur number of text rows. */ size_t t_maxrows; /* 1-N: max number of text rows. */ size_t t_minrows; /* 1-N: min number of text rows. */ size_t woff; /* 0-N: screen offset in frame. */ /* Cursor's: */ recno_t lno; /* 1-N: file line. */ size_t cno; /* 0-N: file character in line. */ size_t rcm; /* Vi: 0-N: Most attractive column. */ #define L_ADDED 0 /* Added lines. */ #define L_CHANGED 1 /* Changed lines. */ #define L_DELETED 2 /* Deleted lines. */ #define L_JOINED 3 /* Joined lines. */ #define L_MOVED 4 /* Moved lines. */ #define L_SHIFT 5 /* Shift lines. */ #define L_YANKED 6 /* Yanked lines. */ recno_t rptlchange; /* Ex/vi: last L_CHANGED lno. */ recno_t rptlines[L_YANKED + 1];/* Ex/vi: lines changed by last op. */ TEXTH tiq; /* Ex/vi: text input queue. */ SCRIPT *script; /* Vi: script mode information .*/ recno_t defscroll; /* Vi: ^D, ^U scroll information. */ /* Display character. */ CHAR_T cname[MAX_CHARACTER_COLUMNS + 1]; size_t clen; /* Length of display character. */ enum { /* Vi editor mode. */ SM_APPEND = 0, SM_CHANGE, SM_COMMAND, SM_INSERT, SM_REPLACE } showmode; void *ex_private; /* Ex private area. */ void *vi_private; /* Vi private area. */ void *perl_private; /* Perl private area. */ /* PARTIALLY OR COMPLETELY COPIED FROM PREVIOUS SCREEN. */ char *alt_name; /* Ex/vi: alternate file name. */ CHAR_T at_lbuf; /* Ex/vi: Last executed at buffer. */ /* Ex/vi: re_compile flags. */ #define RE_C_CSCOPE 0x0001 /* Compile cscope pattern. */ #define RE_C_SEARCH 0x0002 /* Compile search replacement. */ #define RE_C_SILENT 0x0004 /* No error messages. */ #define RE_C_SUBST 0x0008 /* Compile substitute replacement. */ #define RE_C_TAG 0x0010 /* Compile ctag pattern. */ #define RE_WSTART "[[:<:]]" /* Ex/vi: not-in-word search pattern. */ #define RE_WSTOP "[[:>:]]" /* Ex/vi: flags to search routines. */ #define SEARCH_CSCOPE 0x0001 /* Search for a cscope pattern. */ #define SEARCH_EOL 0x0002 /* Offset past EOL is okay. */ #define SEARCH_FILE 0x0004 /* Search the entire file. */ #define SEARCH_INCR 0x0008 /* Search incrementally. */ #define SEARCH_MSG 0x0010 /* Display search messages. */ #define SEARCH_PARSE 0x0020 /* Parse the search pattern. */ #define SEARCH_SET 0x0040 /* Set search direction. */ #define SEARCH_TAG 0x0080 /* Search for a tag pattern. */ #define SEARCH_WMSG 0x0100 /* Display search-wrapped messages. */ /* Ex/vi: RE information. */ dir_t searchdir; /* Last file search direction. */ regex_t re_c; /* Search RE: compiled form. */ char *re; /* Search RE: uncompiled form. */ size_t re_len; /* Search RE: uncompiled length. */ regex_t subre_c; /* Substitute RE: compiled form. */ char *subre; /* Substitute RE: uncompiled form. */ size_t subre_len; /* Substitute RE: uncompiled length). */ char *repl; /* Substitute replacement. */ size_t repl_len; /* Substitute replacement length.*/ size_t *newl; /* Newline offset array. */ size_t newl_len; /* Newline array size. */ size_t newl_cnt; /* Newlines in replacement. */ u_int8_t c_suffix; /* Edcompatible 'c' suffix value. */ u_int8_t g_suffix; /* Edcompatible 'g' suffix value. */ OPTION opts[O_OPTIONCOUNT]; /* Ex/vi: Options. */ /* * Screen flags. * * Editor screens. */ #define SC_EX 0x00000001 /* Ex editor. */ #define SC_VI 0x00000002 /* Vi editor. */ /* * Screen formatting flags, first major, then minor. * * SC_SCR_EX * Ex screen, i.e. cooked mode. * SC_SCR_VI * Vi screen, i.e. raw mode. * SC_SCR_EXWROTE * The editor had to write on the screen behind curses' back, and we can't * let curses change anything until the user agrees, e.g. entering the * commands :!utility followed by :set. We have to switch back into the * vi "editor" to read the user's command input, but we can't touch the * rest of the screen because it's known to be wrong. * SC_SCR_REFORMAT * The expected presentation of the lines on the screen have changed, * requiring that the intended screen lines be recalculated. Implies * SC_SCR_REDRAW. * SC_SCR_REDRAW * The screen doesn't correctly represent the file; repaint it. Note, * setting SC_SCR_REDRAW in the current window causes *all* windows to * be repainted. * SC_SCR_CENTER * If the current line isn't already on the screen, center it. * SC_SCR_TOP * If the current line isn't already on the screen, put it at the to@. */ #define SC_SCR_EX 0x00000004 /* Screen is in ex mode. */ #define SC_SCR_VI 0x00000008 /* Screen is in vi mode. */ #define SC_SCR_EXWROTE 0x00000010 /* Ex overwrite: see comment above. */ #define SC_SCR_REFORMAT 0x00000020 /* Reformat (refresh). */ #define SC_SCR_REDRAW 0x00000040 /* Refresh. */ #define SC_SCR_CENTER 0x00000080 /* Center the line if not visible. */ #define SC_SCR_TOP 0x00000100 /* Top the line if not visible. */ /* Screen/file changes. */ #define SC_EXIT 0x00000200 /* Exiting (not forced). */ #define SC_EXIT_FORCE 0x00000400 /* Exiting (forced). */ #define SC_FSWITCH 0x00000800 /* Switch underlying files. */ #define SC_SSWITCH 0x00001000 /* Switch screens. */ #define SC_ARGNOFREE 0x00002000 /* Argument list wasn't allocated. */ #define SC_ARGRECOVER 0x00004000 /* Argument list is recovery files. */ #define SC_AT_SET 0x00008000 /* Last at buffer set. */ #define SC_COMEDIT 0x00010000 /* Colon command-line edit window. */ #define SC_EX_GLOBAL 0x00020000 /* Ex: executing a global command. */ #define SC_EX_SILENT 0x00040000 /* Ex: batch script. */ #define SC_EX_WAIT_NO 0x00080000 /* Ex: don't wait for the user. */ #define SC_EX_WAIT_YES 0x00100000 /* Ex: do wait for the user. */ #define SC_READONLY 0x00200000 /* Persistent readonly state. */ #define SC_RE_SEARCH 0x00400000 /* Search RE has been compiled. */ #define SC_RE_SUBST 0x00800000 /* Substitute RE has been compiled. */ #define SC_SCRIPT 0x01000000 /* Shell script window. */ #define SC_STATUS 0x02000000 /* Welcome message. */ #define SC_STATUS_CNT 0x04000000 /* Welcome message plus file count. */ #define SC_TINPUT 0x08000000 /* Doing text input. */ #define SC_TINPUT_INFO 0x10000000 /* Doing text input on info line. */ u_int32_t flags; }; vigor-0.016.orig/common/search.c0100644000076400007640000002542107103707216015176 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)search.c 10.25 (Berkeley) 6/30/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "common.h" typedef enum { S_EMPTY, S_EOF, S_NOPREV, S_NOTFOUND, S_SOF, S_WRAP } smsg_t; static void search_msg __P((SCR *, smsg_t)); static int search_init __P((SCR *, dir_t, char *, size_t, char **, u_int)); /* * search_init -- * Set up a search. */ static int search_init(sp, dir, ptrn, plen, epp, flags) SCR *sp; dir_t dir; char *ptrn, **epp; size_t plen; u_int flags; { recno_t lno; int delim; char *p, *t; /* If the file is empty, it's a fast search. */ if (sp->lno <= 1) { if (db_last(sp, &lno)) return (1); if (lno == 0) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_EMPTY); return (1); } } if (LF_ISSET(SEARCH_PARSE)) { /* Parse the string. */ /* * Use the saved pattern if no pattern specified, or if only * one or two delimiter characters specified. * * !!! * Historically, only the pattern itself was saved, vi didn't * preserve addressing or delta information. */ if (ptrn == NULL) goto prev; if (plen == 1) { if (epp != NULL) *epp = ptrn + 1; goto prev; } if (ptrn[0] == ptrn[1]) { if (epp != NULL) *epp = ptrn + 2; /* Complain if we don't have a previous pattern. */ prev: if (sp->re == NULL) { search_msg(sp, S_NOPREV); return (1); } /* Re-compile the search pattern if necessary. */ if (!F_ISSET(sp, SC_RE_SEARCH) && re_compile(sp, sp->re, sp->re_len, NULL, NULL, &sp->re_c, RE_C_SEARCH | (LF_ISSET(SEARCH_MSG) ? 0 : RE_C_SILENT))) return (1); /* Set the search direction. */ if (LF_ISSET(SEARCH_SET)) sp->searchdir = dir; return (0); } /* * Set the delimiter, and move forward to the terminating * delimiter, handling escaped delimiters. * * QUOTING NOTE: * Only discard an escape character if it escapes a delimiter. */ for (delim = *ptrn, p = t = ++ptrn;; *t++ = *p++) { if (--plen == 0 || p[0] == delim) { if (plen != 0) ++p; break; } if (plen > 1 && p[0] == '\\' && p[1] == delim) { ++p; --plen; } } if (epp != NULL) *epp = p; plen = t - ptrn; } /* Compile the RE. */ if (re_compile(sp, ptrn, plen, &sp->re, &sp->re_len, &sp->re_c, RE_C_SEARCH | (LF_ISSET(SEARCH_MSG) ? 0 : RE_C_SILENT) | (LF_ISSET(SEARCH_TAG) ? RE_C_TAG : 0) | (LF_ISSET(SEARCH_CSCOPE) ? RE_C_CSCOPE : 0))) return (1); /* Set the search direction. */ if (LF_ISSET(SEARCH_SET)) sp->searchdir = dir; return (0); } /* * f_search -- * Do a forward search. * * PUBLIC: int f_search __P((SCR *, * PUBLIC: MARK *, MARK *, char *, size_t, char **, u_int)); */ int f_search(sp, fm, rm, ptrn, plen, eptrn, flags) SCR *sp; MARK *fm, *rm; char *ptrn, **eptrn; size_t plen; u_int flags; { busy_t btype; recno_t lno; regmatch_t match[1]; size_t coff, len; int cnt, eval, rval, wrapped; char *l; if (search_init(sp, FORWARD, ptrn, plen, eptrn, flags)) return (1); if (LF_ISSET(SEARCH_FILE)) { lno = 1; coff = 0; } else { if (db_get(sp, fm->lno, DBG_FATAL, &l, &len)) return (1); lno = fm->lno; /* * If doing incremental search, start searching at the previous * column, so that we search a minimal distance and still match * special patterns, e.g., \< for beginning of a word. * * Otherwise, start searching immediately after the cursor. If * at the end of the line, start searching on the next line. * This is incompatible (read bug fix) with the historic vi -- * searches for the '$' pattern never moved forward, and the * "-t foo" didn't work if the 'f' was the first character in * the file. */ if (LF_ISSET(SEARCH_INCR)) { if ((coff = fm->cno) != 0) --coff; } else if (fm->cno + 1 >= len) { coff = 0; lno = fm->lno + 1; if (db_get(sp, lno, 0, &l, &len)) { if (!O_ISSET(sp, O_WRAPSCAN)) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_EOF); return (1); } lno = 1; } } else coff = fm->cno + 1; } btype = BUSY_ON; for (cnt = INTERRUPT_CHECK, rval = 1, wrapped = 0;; ++lno, coff = 0) { if (cnt-- == 0) { if (INTERRUPTED(sp)) break; if (LF_ISSET(SEARCH_MSG)) { search_busy(sp, btype); btype = BUSY_UPDATE; } cnt = INTERRUPT_CHECK; } if (wrapped && lno > fm->lno || db_get(sp, lno, 0, &l, &len)) { if (wrapped) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_NOTFOUND); break; } if (!O_ISSET(sp, O_WRAPSCAN)) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_EOF); break; } lno = 0; wrapped = 1; continue; } /* If already at EOL, just keep going. */ if (len != 0 && coff == len) continue; /* Set the termination. */ match[0].rm_so = coff; match[0].rm_eo = len; #if defined(DEBUG) && 0 TRACE(sp, "F search: %lu from %u to %u\n", lno, coff, len != 0 ? len - 1 : len); #endif /* Search the line. */ eval = regexec(&sp->re_c, l, 1, match, (match[0].rm_so == 0 ? 0 : REG_NOTBOL) | REG_STARTEND); if (eval == REG_NOMATCH) continue; if (eval != 0) { if (LF_ISSET(SEARCH_MSG)) re_error(sp, eval, &sp->re_c); else (void)sp->gp->scr_bell(sp); break; } /* Warn if the search wrapped. */ if (wrapped && LF_ISSET(SEARCH_WMSG)) search_msg(sp, S_WRAP); #if defined(DEBUG) && 0 TRACE(sp, "F search: %qu to %qu\n", match[0].rm_so, match[0].rm_eo); #endif rm->lno = lno; rm->cno = match[0].rm_so; /* * If a change command, it's possible to move beyond the end * of a line. Historic vi generally got this wrong (e.g. try * "c?$"). Not all that sure this gets it right, there * are lots of strange cases. */ if (!LF_ISSET(SEARCH_EOL) && rm->cno >= len) rm->cno = len != 0 ? len - 1 : 0; rval = 0; break; } if (LF_ISSET(SEARCH_MSG)) search_busy(sp, BUSY_OFF); return (rval); } /* * b_search -- * Do a backward search. * * PUBLIC: int b_search __P((SCR *, * PUBLIC: MARK *, MARK *, char *, size_t, char **, u_int)); */ int b_search(sp, fm, rm, ptrn, plen, eptrn, flags) SCR *sp; MARK *fm, *rm; char *ptrn, **eptrn; size_t plen; u_int flags; { busy_t btype; recno_t lno; regmatch_t match[1]; size_t coff, last, len; int cnt, eval, rval, wrapped; char *l; if (search_init(sp, BACKWARD, ptrn, plen, eptrn, flags)) return (1); /* * If doing incremental search, set the "starting" position past the * current column, so that we search a minimal distance and still * match special patterns, e.g., \> for the end of a word. This is * safe when the cursor is at the end of a line because we only use * it for comparison with the location of the match. * * Otherwise, start searching immediately before the cursor. If in * the first column, start search on the previous line. */ if (LF_ISSET(SEARCH_INCR)) { lno = fm->lno; coff = fm->cno + 1; } else { if (fm->cno == 0) { if (fm->lno == 1 && !O_ISSET(sp, O_WRAPSCAN)) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_SOF); return (1); } lno = fm->lno - 1; } else lno = fm->lno; coff = fm->cno; } btype = BUSY_ON; for (cnt = INTERRUPT_CHECK, rval = 1, wrapped = 0;; --lno, coff = 0) { if (cnt-- == 0) { if (INTERRUPTED(sp)) break; if (LF_ISSET(SEARCH_MSG)) { search_busy(sp, btype); btype = BUSY_UPDATE; } cnt = INTERRUPT_CHECK; } if (wrapped && lno < fm->lno || lno == 0) { if (wrapped) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_NOTFOUND); break; } if (!O_ISSET(sp, O_WRAPSCAN)) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_SOF); break; } if (db_last(sp, &lno)) break; if (lno == 0) { if (LF_ISSET(SEARCH_MSG)) search_msg(sp, S_EMPTY); break; } ++lno; wrapped = 1; continue; } if (db_get(sp, lno, 0, &l, &len)) break; /* Set the termination. */ match[0].rm_so = 0; match[0].rm_eo = len; #if defined(DEBUG) && 0 TRACE(sp, "B search: %lu from 0 to %qu\n", lno, match[0].rm_eo); #endif /* Search the line. */ eval = regexec(&sp->re_c, l, 1, match, (match[0].rm_eo == len ? 0 : REG_NOTEOL) | REG_STARTEND); if (eval == REG_NOMATCH) continue; if (eval != 0) { if (LF_ISSET(SEARCH_MSG)) re_error(sp, eval, &sp->re_c); else (void)sp->gp->scr_bell(sp); break; } /* Check for a match starting past the cursor. */ if (coff != 0 && match[0].rm_so >= coff) continue; /* Warn if the search wrapped. */ if (wrapped && LF_ISSET(SEARCH_WMSG)) search_msg(sp, S_WRAP); #if defined(DEBUG) && 0 TRACE(sp, "B found: %qu to %qu\n", match[0].rm_so, match[0].rm_eo); #endif /* * We now have the first match on the line. Step through the * line character by character until find the last acceptable * match. This is painful, we need a better interface to regex * to make this work. */ for (;;) { last = match[0].rm_so++; if (match[0].rm_so >= len) break; match[0].rm_eo = len; eval = regexec(&sp->re_c, l, 1, match, (match[0].rm_so == 0 ? 0 : REG_NOTBOL) | REG_STARTEND); if (eval == REG_NOMATCH) break; if (eval != 0) { if (LF_ISSET(SEARCH_MSG)) re_error(sp, eval, &sp->re_c); else (void)sp->gp->scr_bell(sp); goto err; } if (coff && match[0].rm_so >= coff) break; } rm->lno = lno; /* See comment in f_search(). */ if (!LF_ISSET(SEARCH_EOL) && last >= len) rm->cno = len != 0 ? len - 1 : 0; else rm->cno = last; rval = 0; break; } err: if (LF_ISSET(SEARCH_MSG)) search_busy(sp, BUSY_OFF); return (rval); } /* * search_msg -- * Display one of the search messages. */ static void search_msg(sp, msg) SCR *sp; smsg_t msg; { switch (msg) { case S_EMPTY: msgq(sp, M_ERR, "072|File empty; nothing to search"); break; case S_EOF: msgq(sp, M_ERR, "073|Reached end-of-file without finding the pattern"); break; case S_NOPREV: msgq(sp, M_ERR, "074|No previous search pattern"); break; case S_NOTFOUND: msgq(sp, M_ERR, "075|Pattern not found"); break; case S_SOF: msgq(sp, M_ERR, "076|Reached top-of-file without finding the pattern"); break; case S_WRAP: msgq(sp, M_ERR, "077|Search wrapped"); break; default: abort(); } } /* * search_busy -- * Put up the busy searching message. * * PUBLIC: void search_busy __P((SCR *, busy_t)); */ void search_busy(sp, btype) SCR *sp; busy_t btype; { sp->gp->scr_busy(sp, "078|Searching...", btype); } vigor-0.016.orig/common/util.c0100644000076400007640000001010207103707216014674 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)util.c 10.11 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "common.h" /* * binc -- * Increase the size of a buffer. * * PUBLIC: void *binc __P((SCR *, void *, size_t *, size_t)); */ void * binc(sp, bp, bsizep, min) SCR *sp; /* sp MAY BE NULL!!! */ void *bp; size_t *bsizep, min; { size_t csize; /* If already larger than the minimum, just return. */ if (min && *bsizep >= min) return (bp); csize = *bsizep + MAX(min, 256); REALLOC(sp, bp, void *, csize); if (bp == NULL) { /* * Theoretically, realloc is supposed to leave any already * held memory alone if it can't get more. Don't trust it. */ *bsizep = 0; return (NULL); } /* * Memory is guaranteed to be zero-filled, various parts of * nvi depend on this. */ memset((char *)bp + *bsizep, 0, csize - *bsizep); *bsizep = csize; return (bp); } /* * nonblank -- * Set the column number of the first non-blank character * including or after the starting column. On error, set * the column to 0, it's safest. * * PUBLIC: int nonblank __P((SCR *, recno_t, size_t *)); */ int nonblank(sp, lno, cnop) SCR *sp; recno_t lno; size_t *cnop; { char *p; size_t cnt, len, off; int isempty; /* Default. */ off = *cnop; *cnop = 0; /* Get the line, succeeding in an empty file. */ if (db_eget(sp, lno, &p, &len, &isempty)) return (!isempty); /* Set the offset. */ if (len == 0 || off >= len) return (0); for (cnt = off, p = &p[off], len -= off; len && isblank(*p); ++cnt, ++p, --len); /* Set the return. */ *cnop = len ? cnt : cnt - 1; return (0); } /* * tail -- * Return tail of a path. * * PUBLIC: char *tail __P((char *)); */ char * tail(path) char *path; { char *p; if ((p = strrchr(path, '/')) == NULL) return (path); return (p + 1); } /* * v_strdup -- * Strdup for wide character strings with an associated length. * * PUBLIC: CHAR_T *v_strdup __P((SCR *, const CHAR_T *, size_t)); */ CHAR_T * v_strdup(sp, str, len) SCR *sp; const CHAR_T *str; size_t len; { CHAR_T *copy; MALLOC(sp, copy, CHAR_T *, len + 1); if (copy == NULL) return (NULL); memcpy(copy, str, len * sizeof(CHAR_T)); copy[len] = '\0'; return (copy); } /* * nget_uslong -- * Get an unsigned long, checking for overflow. * * PUBLIC: enum nresult nget_uslong __P((u_long *, const char *, char **, int)); */ enum nresult nget_uslong(valp, p, endp, base) u_long *valp; const char *p; char **endp; int base; { errno = 0; *valp = strtoul(p, endp, base); if (errno == 0) return (NUM_OK); if (errno == ERANGE && *valp == ULONG_MAX) return (NUM_OVER); return (NUM_ERR); } /* * nget_slong -- * Convert a signed long, checking for overflow and underflow. * * PUBLIC: enum nresult nget_slong __P((long *, const char *, char **, int)); */ enum nresult nget_slong(valp, p, endp, base) long *valp; const char *p; char **endp; int base; { errno = 0; *valp = strtol(p, endp, base); if (errno == 0) return (NUM_OK); if (errno == ERANGE) { if (*valp == LONG_MAX) return (NUM_OVER); if (*valp == LONG_MIN) return (NUM_UNDER); } return (NUM_ERR); } #ifdef DEBUG #ifdef __STDC__ #include #else #include #endif /* * TRACE -- * debugging trace routine. * * PUBLIC: void TRACE __P((SCR *, const char *, ...)); */ void #ifdef __STDC__ TRACE(SCR *sp, const char *fmt, ...) #else TRACE(sp, fmt, va_alist) SCR *sp; char *fmt; va_dcl #endif { FILE *tfp; va_list ap; if ((tfp = sp->gp->tracefp) == NULL) return; #ifdef __STDC__ va_start(ap, fmt); #else va_start(ap); #endif (void)vfprintf(tfp, fmt, ap); va_end(ap); (void)fflush(tfp); } #endif vigor-0.016.orig/common/seq.c0100644000076400007640000002026607103707216014523 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)seq.c 10.10 (Berkeley) 3/30/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "common.h" /* * seq_set -- * Internal version to enter a sequence. * * PUBLIC: int seq_set __P((SCR *, CHAR_T *, * PUBLIC: size_t, CHAR_T *, size_t, CHAR_T *, size_t, seq_t, int)); */ int seq_set(sp, name, nlen, input, ilen, output, olen, stype, flags) SCR *sp; CHAR_T *name, *input, *output; size_t nlen, ilen, olen; seq_t stype; int flags; { CHAR_T *p; SEQ *lastqp, *qp; int sv_errno; /* * An input string must always be present. The output string * can be NULL, when set internally, that's how we throw away * input. * * Just replace the output field if the string already set. */ if ((qp = seq_find(sp, &lastqp, NULL, input, ilen, stype, NULL)) != NULL) { if (LF_ISSET(SEQ_NOOVERWRITE)) return (0); if (output == NULL || olen == 0) { p = NULL; olen = 0; } else if ((p = v_strdup(sp, output, olen)) == NULL) { sv_errno = errno; goto mem1; } if (qp->output != NULL) free(qp->output); qp->olen = olen; qp->output = p; return (0); } /* Allocate and initialize SEQ structure. */ CALLOC(sp, qp, SEQ *, 1, sizeof(SEQ)); if (qp == NULL) { sv_errno = errno; goto mem1; } /* Name. */ if (name == NULL || nlen == 0) qp->name = NULL; else if ((qp->name = v_strdup(sp, name, nlen)) == NULL) { sv_errno = errno; goto mem2; } qp->nlen = nlen; /* Input. */ if ((qp->input = v_strdup(sp, input, ilen)) == NULL) { sv_errno = errno; goto mem3; } qp->ilen = ilen; /* Output. */ if (output == NULL) { qp->output = NULL; olen = 0; } else if ((qp->output = v_strdup(sp, output, olen)) == NULL) { sv_errno = errno; free(qp->input); mem3: if (qp->name != NULL) free(qp->name); mem2: free(qp); mem1: errno = sv_errno; msgq(sp, M_SYSERR, NULL); return (1); } qp->olen = olen; /* Type, flags. */ qp->stype = stype; qp->flags = flags; /* Link into the chain. */ if (lastqp == NULL) { LIST_INSERT_HEAD(&sp->gp->seqq, qp, q); } else { LIST_INSERT_AFTER(lastqp, qp, q); } /* Set the fast lookup bit. */ if (qp->input[0] < MAX_BIT_SEQ) bit_set(sp->gp->seqb, qp->input[0]); return (0); } /* * seq_delete -- * Delete a sequence. * * PUBLIC: int seq_delete __P((SCR *, CHAR_T *, size_t, seq_t)); */ int seq_delete(sp, input, ilen, stype) SCR *sp; CHAR_T *input; size_t ilen; seq_t stype; { SEQ *qp; if ((qp = seq_find(sp, NULL, NULL, input, ilen, stype, NULL)) == NULL) return (1); return (seq_mdel(qp)); } /* * seq_mdel -- * Delete a map entry, without lookup. * * PUBLIC: int seq_mdel __P((SEQ *)); */ int seq_mdel(qp) SEQ *qp; { LIST_REMOVE(qp, q); if (qp->name != NULL) free(qp->name); free(qp->input); if (qp->output != NULL) free(qp->output); free(qp); return (0); } /* * seq_find -- * Search the sequence list for a match to a buffer, if ispartial * isn't NULL, partial matches count. * * PUBLIC: SEQ *seq_find * PUBLIC: __P((SCR *, SEQ **, EVENT *, CHAR_T *, size_t, seq_t, int *)); */ SEQ * seq_find(sp, lastqp, e_input, c_input, ilen, stype, ispartialp) SCR *sp; SEQ **lastqp; EVENT *e_input; CHAR_T *c_input; size_t ilen; seq_t stype; int *ispartialp; { SEQ *lqp, *qp; int diff; /* * Ispartialp is a location where we return if there was a * partial match, i.e. if the string were extended it might * match something. * * XXX * Overload the meaning of ispartialp; only the terminal key * search doesn't want the search limited to complete matches, * i.e. ilen may be longer than the match. */ if (ispartialp != NULL) *ispartialp = 0; for (lqp = NULL, qp = sp->gp->seqq.lh_first; qp != NULL; lqp = qp, qp = qp->q.le_next) { /* * Fast checks on the first character and type, and then * a real comparison. */ if (e_input == NULL) { if (qp->input[0] > c_input[0]) break; if (qp->input[0] < c_input[0] || qp->stype != stype || F_ISSET(qp, SEQ_FUNCMAP)) continue; diff = memcmp(qp->input, c_input, MIN(qp->ilen, ilen)); } else { if (qp->input[0] > e_input->e_c) break; if (qp->input[0] < e_input->e_c || qp->stype != stype || F_ISSET(qp, SEQ_FUNCMAP)) continue; diff = e_memcmp(qp->input, e_input, MIN(qp->ilen, ilen)); } if (diff > 0) break; if (diff < 0) continue; /* * If the entry is the same length as the string, return a * match. If the entry is shorter than the string, return a * match if called from the terminal key routine. Otherwise, * keep searching for a complete match. */ if (qp->ilen <= ilen) { if (qp->ilen == ilen || ispartialp != NULL) { if (lastqp != NULL) *lastqp = lqp; return (qp); } continue; } /* * If the entry longer than the string, return partial match * if called from the terminal key routine. Otherwise, no * match. */ if (ispartialp != NULL) *ispartialp = 1; break; } if (lastqp != NULL) *lastqp = lqp; return (NULL); } /* * seq_close -- * Discard all sequences. * * PUBLIC: void seq_close __P((GS *)); */ void seq_close(gp) GS *gp; { SEQ *qp; while ((qp = gp->seqq.lh_first) != NULL) { if (qp->name != NULL) free(qp->name); if (qp->input != NULL) free(qp->input); if (qp->output != NULL) free(qp->output); LIST_REMOVE(qp, q); free(qp); } } /* * seq_dump -- * Display the sequence entries of a specified type. * * PUBLIC: int seq_dump __P((SCR *, seq_t, int)); */ int seq_dump(sp, stype, isname) SCR *sp; seq_t stype; int isname; { CHAR_T *p; GS *gp; SEQ *qp; int cnt, len, olen; cnt = 0; gp = sp->gp; for (qp = gp->seqq.lh_first; qp != NULL; qp = qp->q.le_next) { if (stype != qp->stype || F_ISSET(qp, SEQ_FUNCMAP)) continue; ++cnt; for (p = qp->input, olen = qp->ilen, len = 0; olen > 0; --olen, ++p) len += ex_puts(sp, KEY_NAME(sp, *p)); for (len = STANDARD_TAB - len % STANDARD_TAB; len > 0;) len -= ex_puts(sp, " "); if (qp->output != NULL) for (p = qp->output, olen = qp->olen, len = 0; olen > 0; --olen, ++p) len += ex_puts(sp, KEY_NAME(sp, *p)); else len = 0; if (isname && qp->name != NULL) { for (len = STANDARD_TAB - len % STANDARD_TAB; len > 0;) len -= ex_puts(sp, " "); for (p = qp->name, olen = qp->nlen; olen > 0; --olen, ++p) (void)ex_puts(sp, KEY_NAME(sp, *p)); } (void)ex_puts(sp, "\n"); } return (cnt); } /* * seq_save -- * Save the sequence entries to a file. * * PUBLIC: int seq_save __P((SCR *, FILE *, char *, seq_t)); */ int seq_save(sp, fp, prefix, stype) SCR *sp; FILE *fp; char *prefix; seq_t stype; { CHAR_T *p; SEQ *qp; size_t olen; int ch; /* Write a sequence command for all keys the user defined. */ for (qp = sp->gp->seqq.lh_first; qp != NULL; qp = qp->q.le_next) { if (stype != qp->stype || !F_ISSET(qp, SEQ_USERDEF)) continue; if (prefix) (void)fprintf(fp, "%s", prefix); for (p = qp->input, olen = qp->ilen; olen > 0; --olen) { ch = *p++; if (ch == CH_LITERAL || ch == '|' || isblank(ch) || KEY_VAL(sp, ch) == K_NL) (void)putc(CH_LITERAL, fp); (void)putc(ch, fp); } (void)putc(' ', fp); if (qp->output != NULL) for (p = qp->output, olen = qp->olen; olen > 0; --olen) { ch = *p++; if (ch == CH_LITERAL || ch == '|' || KEY_VAL(sp, ch) == K_NL) (void)putc(CH_LITERAL, fp); (void)putc(ch, fp); } (void)putc('\n', fp); } return (0); } /* * e_memcmp -- * Compare a string of EVENT's to a string of CHAR_T's. * * PUBLIC: int e_memcmp __P((CHAR_T *, EVENT *, size_t)); */ int e_memcmp(p1, ep, n) CHAR_T *p1; EVENT *ep; size_t n; { if (n != 0) { do { if (*p1++ != ep->e_c) return (*--p1 - ep->e_c); ++ep; } while (--n != 0); } return (0); } vigor-0.016.orig/common/seq.h0100644000076400007640000000310507103707216014521 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)seq.h 10.3 (Berkeley) 3/6/96 */ /* * Map and abbreviation structures. * * The map structure is doubly linked list, sorted by input string and by * input length within the string. (The latter is necessary so that short * matches will happen before long matches when the list is searched.) * Additionally, there is a bitmap which has bits set if there are entries * starting with the corresponding character. This keeps us from walking * the list unless it's necessary. * * The name and the output fields of a SEQ can be empty, i.e. NULL. * Only the input field is required. * * XXX * The fast-lookup bits are never turned off -- users don't usually unmap * things, though, so it's probably not a big deal. */ struct _seq { LIST_ENTRY(_seq) q; /* Linked list of all sequences. */ seq_t stype; /* Sequence type. */ CHAR_T *name; /* Sequence name (if any). */ size_t nlen; /* Name length. */ CHAR_T *input; /* Sequence input keys. */ size_t ilen; /* Input keys length. */ CHAR_T *output; /* Sequence output keys. */ size_t olen; /* Output keys length. */ #define SEQ_FUNCMAP 0x01 /* If unresolved function key.*/ #define SEQ_NOOVERWRITE 0x02 /* Don't replace existing entry. */ #define SEQ_SCREEN 0x04 /* If screen specific. */ #define SEQ_USERDEF 0x08 /* If user defined. */ u_int8_t flags; }; vigor-0.016.orig/common/tags0120777000076400007640000000000007107504605016635 2../build/tagsustar cjw44cjw44vigor-0.016.orig/include/0040755000076400007640000000000007103707315013717 5ustar cjw44cjw44vigor-0.016.orig/include/sys/0040755000076400007640000000000007103707216014535 5ustar cjw44cjw44vigor-0.016.orig/include/sys/queue.h0100644000076400007640000002166007103707216016034 0ustar cjw44cjw44/* * Copyright (c) 1991, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)queue.h 8.5 (Berkeley) 8/20/94 */ #ifndef _SYS_QUEUE_H_ #define _SYS_QUEUE_H_ /* * This file defines three types of data structures: lists, tail queues, * and circular queues. * * A list is headed by a single forward pointer (or an array of forward * pointers for a hash table header). The elements are doubly linked * so that an arbitrary element can be removed without a need to * traverse the list. New elements can be added to the list before * or after an existing element or at the head of the list. A list * may only be traversed in the forward direction. * * A tail queue is headed by a pair of pointers, one to the head of the * list and the other to the tail of the list. The elements are doubly * linked so that an arbitrary element can be removed without a need to * traverse the list. New elements can be added to the list before or * after an existing element, at the head of the list, or at the end of * the list. A tail queue may only be traversed in the forward direction. * * A circle queue is headed by a pair of pointers, one to the head of the * list and the other to the tail of the list. The elements are doubly * linked so that an arbitrary element can be removed without a need to * traverse the list. New elements can be added to the list before or after * an existing element, at the head of the list, or at the end of the list. * A circle queue may be traversed in either direction, but has a more * complex end of list detection. * * For details on the use of these macros, see the queue(3) manual page. */ /* * List definitions. */ #define LIST_HEAD(name, type) \ struct name { \ struct type *lh_first; /* first element */ \ } #define LIST_ENTRY(type) \ struct { \ struct type *le_next; /* next element */ \ struct type **le_prev; /* address of previous next element */ \ } /* * List functions. */ #define LIST_INIT(head) { \ (head)->lh_first = NULL; \ } #define LIST_INSERT_AFTER(listelm, elm, field) { \ if (((elm)->field.le_next = (listelm)->field.le_next) != NULL) \ (listelm)->field.le_next->field.le_prev = \ &(elm)->field.le_next; \ (listelm)->field.le_next = (elm); \ (elm)->field.le_prev = &(listelm)->field.le_next; \ } #define LIST_INSERT_BEFORE(listelm, elm, field) { \ (elm)->field.le_prev = (listelm)->field.le_prev; \ (elm)->field.le_next = (listelm); \ *(listelm)->field.le_prev = (elm); \ (listelm)->field.le_prev = &(elm)->field.le_next; \ } #define LIST_INSERT_HEAD(head, elm, field) { \ if (((elm)->field.le_next = (head)->lh_first) != NULL) \ (head)->lh_first->field.le_prev = &(elm)->field.le_next;\ (head)->lh_first = (elm); \ (elm)->field.le_prev = &(head)->lh_first; \ } #define LIST_REMOVE(elm, field) { \ if ((elm)->field.le_next != NULL) \ (elm)->field.le_next->field.le_prev = \ (elm)->field.le_prev; \ *(elm)->field.le_prev = (elm)->field.le_next; \ } /* * Tail queue definitions. */ #define TAILQ_HEAD(name, type) \ struct name { \ struct type *tqh_first; /* first element */ \ struct type **tqh_last; /* addr of last next element */ \ } #define TAILQ_ENTRY(type) \ struct { \ struct type *tqe_next; /* next element */ \ struct type **tqe_prev; /* address of previous next element */ \ } /* * Tail queue functions. */ #define TAILQ_INIT(head) { \ (head)->tqh_first = NULL; \ (head)->tqh_last = &(head)->tqh_first; \ } #define TAILQ_INSERT_HEAD(head, elm, field) { \ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \ (head)->tqh_first->field.tqe_prev = \ &(elm)->field.tqe_next; \ else \ (head)->tqh_last = &(elm)->field.tqe_next; \ (head)->tqh_first = (elm); \ (elm)->field.tqe_prev = &(head)->tqh_first; \ } #define TAILQ_INSERT_TAIL(head, elm, field) { \ (elm)->field.tqe_next = NULL; \ (elm)->field.tqe_prev = (head)->tqh_last; \ *(head)->tqh_last = (elm); \ (head)->tqh_last = &(elm)->field.tqe_next; \ } #define TAILQ_INSERT_AFTER(head, listelm, elm, field) { \ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\ (elm)->field.tqe_next->field.tqe_prev = \ &(elm)->field.tqe_next; \ else \ (head)->tqh_last = &(elm)->field.tqe_next; \ (listelm)->field.tqe_next = (elm); \ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \ } #define TAILQ_INSERT_BEFORE(listelm, elm, field) { \ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ (elm)->field.tqe_next = (listelm); \ *(listelm)->field.tqe_prev = (elm); \ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \ } #define TAILQ_REMOVE(head, elm, field) { \ if (((elm)->field.tqe_next) != NULL) \ (elm)->field.tqe_next->field.tqe_prev = \ (elm)->field.tqe_prev; \ else \ (head)->tqh_last = (elm)->field.tqe_prev; \ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \ } /* * Circular queue definitions. */ #define CIRCLEQ_HEAD(name, type) \ struct name { \ struct type *cqh_first; /* first element */ \ struct type *cqh_last; /* last element */ \ } #define CIRCLEQ_ENTRY(type) \ struct { \ struct type *cqe_next; /* next element */ \ struct type *cqe_prev; /* previous element */ \ } /* * Circular queue functions. */ #define CIRCLEQ_INIT(head) { \ (head)->cqh_first = (void *)(head); \ (head)->cqh_last = (void *)(head); \ } #define CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) { \ (elm)->field.cqe_next = (listelm)->field.cqe_next; \ (elm)->field.cqe_prev = (listelm); \ if ((listelm)->field.cqe_next == (void *)(head)) \ (head)->cqh_last = (elm); \ else \ (listelm)->field.cqe_next->field.cqe_prev = (elm); \ (listelm)->field.cqe_next = (elm); \ } #define CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) { \ (elm)->field.cqe_next = (listelm); \ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ if ((listelm)->field.cqe_prev == (void *)(head)) \ (head)->cqh_first = (elm); \ else \ (listelm)->field.cqe_prev->field.cqe_next = (elm); \ (listelm)->field.cqe_prev = (elm); \ } #define CIRCLEQ_INSERT_HEAD(head, elm, field) { \ (elm)->field.cqe_next = (head)->cqh_first; \ (elm)->field.cqe_prev = (void *)(head); \ if ((head)->cqh_last == (void *)(head)) \ (head)->cqh_last = (elm); \ else \ (head)->cqh_first->field.cqe_prev = (elm); \ (head)->cqh_first = (elm); \ } #define CIRCLEQ_INSERT_TAIL(head, elm, field) { \ (elm)->field.cqe_next = (void *)(head); \ (elm)->field.cqe_prev = (head)->cqh_last; \ if ((head)->cqh_first == (void *)(head)) \ (head)->cqh_first = (elm); \ else \ (head)->cqh_last->field.cqe_next = (elm); \ (head)->cqh_last = (elm); \ } #define CIRCLEQ_REMOVE(head, elm, field) { \ if ((elm)->field.cqe_next == (void *)(head)) \ (head)->cqh_last = (elm)->field.cqe_prev; \ else \ (elm)->field.cqe_next->field.cqe_prev = \ (elm)->field.cqe_prev; \ if ((elm)->field.cqe_prev == (void *)(head)) \ (head)->cqh_first = (elm)->field.cqe_next; \ else \ (elm)->field.cqe_prev->field.cqe_next = \ (elm)->field.cqe_next; \ } #endif /* !_SYS_QUEUE_H_ */ vigor-0.016.orig/include/bitstring.h0100644000076400007640000001165607103707216016103 0ustar cjw44cjw44/* * Copyright (c) 1989, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Paul Vixie. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)bitstring.h 8.1 (Berkeley) 7/19/93 */ #ifndef _BITSTRING_H_ #define _BITSTRING_H_ typedef unsigned char bitstr_t; /* internal macros */ /* byte of the bitstring bit is in */ #define _bit_byte(bit) \ ((bit) >> 3) /* mask for the bit within its byte */ #define _bit_mask(bit) \ (1 << ((bit)&0x7)) /* external macros */ /* bytes in a bitstring of nbits bits */ #define bitstr_size(nbits) \ ((((nbits) - 1) >> 3) + 1) /* allocate a bitstring */ #define bit_alloc(nbits) \ (bitstr_t *)calloc(1, \ (unsigned int)bitstr_size(nbits) * sizeof(bitstr_t)) /* allocate a bitstring on the stack */ #define bit_decl(name, nbits) \ (name)[bitstr_size(nbits)] /* is bit N of bitstring name set? */ #define bit_test(name, bit) \ ((name)[_bit_byte(bit)] & _bit_mask(bit)) /* set bit N of bitstring name */ #define bit_set(name, bit) \ (name)[_bit_byte(bit)] |= _bit_mask(bit) /* clear bit N of bitstring name */ #define bit_clear(name, bit) \ (name)[_bit_byte(bit)] &= ~_bit_mask(bit) /* clear bits start ... stop in bitstring */ #define bit_nclear(name, start, stop) { \ register bitstr_t *_name = name; \ register int _start = start, _stop = stop; \ register int _startbyte = _bit_byte(_start); \ register int _stopbyte = _bit_byte(_stop); \ if (_startbyte == _stopbyte) { \ _name[_startbyte] &= ((0xff >> (8 - (_start&0x7))) | \ (0xff << ((_stop&0x7) + 1))); \ } else { \ _name[_startbyte] &= 0xff >> (8 - (_start&0x7)); \ while (++_startbyte < _stopbyte) \ _name[_startbyte] = 0; \ _name[_stopbyte] &= 0xff << ((_stop&0x7) + 1); \ } \ } /* set bits start ... stop in bitstring */ #define bit_nset(name, start, stop) { \ register bitstr_t *_name = name; \ register int _start = start, _stop = stop; \ register int _startbyte = _bit_byte(_start); \ register int _stopbyte = _bit_byte(_stop); \ if (_startbyte == _stopbyte) { \ _name[_startbyte] |= ((0xff << (_start&0x7)) & \ (0xff >> (7 - (_stop&0x7)))); \ } else { \ _name[_startbyte] |= 0xff << ((_start)&0x7); \ while (++_startbyte < _stopbyte) \ _name[_startbyte] = 0xff; \ _name[_stopbyte] |= 0xff >> (7 - (_stop&0x7)); \ } \ } /* find first bit clear in name */ #define bit_ffc(name, nbits, value) { \ register bitstr_t *_name = name; \ register int _byte, _nbits = nbits; \ register int _stopbyte = _bit_byte(_nbits), _value = -1; \ for (_byte = 0; _byte <= _stopbyte; ++_byte) \ if (_name[_byte] != 0xff) { \ _value = _byte << 3; \ for (_stopbyte = _name[_byte]; (_stopbyte&0x1); \ ++_value, _stopbyte >>= 1); \ break; \ } \ *(value) = _value; \ } /* find first bit set in name */ #define bit_ffs(name, nbits, value) { \ register bitstr_t *_name = name; \ register int _byte, _nbits = nbits; \ register int _stopbyte = _bit_byte(_nbits), _value = -1; \ for (_byte = 0; _byte <= _stopbyte; ++_byte) \ if (_name[_byte]) { \ _value = _byte << 3; \ for (_stopbyte = _name[_byte]; !(_stopbyte&0x1); \ ++_value, _stopbyte >>= 1); \ break; \ } \ *(value) = _value; \ } #endif /* !_BITSTRING_H_ */ vigor-0.016.orig/include/cl_extern.h0100644000076400007640000000325507103707216016055 0ustar cjw44cjw44#ifndef HAVE_CURSES_ADDNSTR int addnstr __P((char *, int)); #endif #ifndef HAVE_CURSES_BEEP void beep __P((void)); #endif #ifndef HAVE_CURSES_FLASH void flash __P((void)); #endif #ifndef HAVE_CURSES_IDLOK void idlok __P((WINDOW *, int)); #endif #ifndef HAVE_CURSES_KEYPAD int keypad __P((void *, int)); #endif #ifndef HAVE_CURSES_NEWTERM void *newterm __P((const char *, FILE *, FILE *)); #endif #ifndef HAVE_CURSES_SETUPTERM void setupterm __P((char *, int, int *)); #endif #ifdef HAVE_CURSES_TIGETSTR char *tigetstr(); #else char *tigetstr __P((char *)); #endif #ifndef HAVE_CURSES_TIGETSTR int tigetnum __P((char *)); #endif int cl_addstr __P((SCR *, const char *, size_t)); int cl_attr __P((SCR *, scr_attr_t, int)); int cl_baud __P((SCR *, u_long *)); int cl_bell __P((SCR *)); int cl_clrtoeol __P((SCR *)); int cl_cursor __P((SCR *, size_t *, size_t *)); int cl_deleteln __P((SCR *)); int cl_ex_adjust __P((SCR *, exadj_t)); int cl_insertln __P((SCR *)); int cl_keyval __P((SCR *, scr_keyval_t, CHAR_T *, int *)); int cl_move __P((SCR *, size_t, size_t)); int cl_refresh __P((SCR *, int)); int cl_rename __P((SCR *, char *, int)); int cl_suspend __P((SCR *, int *)); void cl_usage __P((void)); int sig_init __P((GS *, SCR *)); int cl_event __P((SCR *, EVENT *, u_int32_t, int)); int cl_screen __P((SCR *, u_int32_t)); int cl_quit __P((GS *)); int cl_getcap __P((SCR *, char *, char **)); int cl_term_init __P((SCR *)); int cl_term_end __P((GS *)); int cl_fmap __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); int cl_optchange __P((SCR *, int, char *, u_long *)); int cl_omesg __P((SCR *, CL_PRIVATE *, int)); int cl_ssize __P((SCR *, int, size_t *, size_t *, int *)); int cl_putchar __P((int)); vigor-0.016.orig/include/com_extern.h0100644000076400007640000001663207103707216016240 0ustar cjw44cjw44#ifndef HAVE_BSEARCH void *bsearch __P((const void *, const void *, size_t, size_t, int (*)(const void *, const void *))); #endif #ifndef HAVE_SETENV int setenv __P((const char *, const char *, int)); #endif #ifndef HAVE_UNSETENV void unsetenv __P((const char *)); #endif #ifndef HAVE_GETHOSTNAME int gethostname __P((char *, int)); #endif #ifndef HAVE_GETOPT int getopt __P((int, char * const *, const char *)); #endif #ifndef HAVE_MEMCHR void *memchr __P((const void *, int, size_t)); #endif #ifndef HAVE_MEMCPY void *memcpy __P((void *, const void *, size_t)); #endif #ifndef HAVE_MEMMOVE void *memmove __P((void *, const void *, size_t)); #endif #ifndef HAVE_MEMSET void *memset __P((void *, int, size_t)); #endif #ifndef HAVE_MKSTEMP int mkstemp __P((char *)); #endif #ifndef HAVE_MMAP char *mmap __P((char *, size_t, int, int, int, off_t)); #endif #ifndef HAVE_MMAP int munmap __P((char *, size_t)); #endif #ifndef HAVE_SNPRINTF int snprintf __P((char *, size_t, const char *, ...)); #endif #ifndef HAVE_STRDUP char *strdup __P((const char *)); #endif #ifndef HAVE_STRERROR char *strerror __P((int)); #endif #ifndef HAVE_STRPBRK char *strpbrk __P((const char *, const char *)); #endif #ifndef HAVE_STRSEP char *strsep __P((char **, const char *)); #endif #ifndef HAVE_STRTOL long strtol __P((const char *, char **, int)); #endif #ifndef HAVE_STRTOUL unsigned long strtoul __P((const char *, char **, int)); #endif #ifndef HAVE_VSNPRINTF int vsnprintf __P((char *, size_t, const char *, ...)); #endif SCR *api_fscreen __P((int, char *)); int api_aline __P((SCR *, recno_t, char *, size_t)); int api_dline __P((SCR *, recno_t)); int api_gline __P((SCR *, recno_t, char **, size_t *)); int api_iline __P((SCR *, recno_t, char *, size_t)); int api_lline __P((SCR *, recno_t *)); int api_sline __P((SCR *, recno_t, char *, size_t)); int api_getmark __P((SCR *, int, MARK *)); int api_setmark __P((SCR *, int, MARK *)); int api_nextmark __P((SCR *, int, char *)); int api_getcursor __P((SCR *, MARK *)); int api_setcursor __P((SCR *, MARK *)); void api_emessage __P((SCR *, char *)); void api_imessage __P((SCR *, char *)); int api_edit __P((SCR *, char *, SCR **, int)); int api_escreen __P((SCR *)); int api_swscreen __P((SCR *, SCR *)); int api_map __P((SCR *, char *, char *, size_t)); int api_unmap __P((SCR *, char *)); int api_opts_get __P((SCR *, char *, char **, int *)); int api_opts_set __P((SCR *, char *, char *, u_long, int)); int api_run_str __P((SCR *, char *)); int cut __P((SCR *, CHAR_T *, MARK *, MARK *, int)); int cut_line __P((SCR *, recno_t, size_t, size_t, CB *)); void cut_close __P((GS *)); TEXT *text_init __P((SCR *, const char *, size_t, size_t)); void text_lfree __P((TEXTH *)); void text_free __P((TEXT *)); int del __P((SCR *, MARK *, MARK *, int)); FREF *file_add __P((SCR *, CHAR_T *)); int file_init __P((SCR *, FREF *, char *, int)); int file_end __P((SCR *, EXF *, int)); int file_write __P((SCR *, MARK *, MARK *, char *, int)); int file_m1 __P((SCR *, int, int)); int file_m2 __P((SCR *, int)); int file_m3 __P((SCR *, int)); int file_aw __P((SCR *, int)); void set_alt_name __P((SCR *, char *)); lockr_t file_lock __P((SCR *, char *, int *, int, int)); int v_key_init __P((SCR *)); void v_key_ilookup __P((SCR *)); size_t v_key_len __P((SCR *, ARG_CHAR_T)); CHAR_T *v_key_name __P((SCR *, ARG_CHAR_T)); int v_key_val __P((SCR *, ARG_CHAR_T)); int v_event_push __P((SCR *, EVENT *, CHAR_T *, size_t, u_int)); int v_event_get __P((SCR *, EVENT *, int, u_int32_t)); void v_event_err __P((SCR *, EVENT *)); int v_event_flush __P((SCR *, u_int)); int db_eget __P((SCR *, recno_t, char **, size_t *, int *)); int db_get __P((SCR *, recno_t, u_int32_t, char **, size_t *)); int db_delete __P((SCR *, recno_t)); int db_append __P((SCR *, int, recno_t, char *, size_t)); int db_insert __P((SCR *, recno_t, char *, size_t)); int db_set __P((SCR *, recno_t, char *, size_t)); int db_exist __P((SCR *, recno_t)); int db_last __P((SCR *, recno_t *)); void db_err __P((SCR *, recno_t)); int log_init __P((SCR *, EXF *)); int log_end __P((SCR *, EXF *)); int log_cursor __P((SCR *)); int log_line __P((SCR *, recno_t, u_int)); int log_mark __P((SCR *, LMARK *)); int log_backward __P((SCR *, MARK *)); int log_setline __P((SCR *)); int log_forward __P((SCR *, MARK *)); int editor __P((GS *, int, char *[])); void v_end __P((GS *)); int mark_init __P((SCR *, EXF *)); int mark_end __P((SCR *, EXF *)); int mark_get __P((SCR *, ARG_CHAR_T, MARK *, mtype_t)); int mark_set __P((SCR *, ARG_CHAR_T, MARK *, int)); int mark_insdel __P((SCR *, lnop_t, recno_t)); void msgq __P((SCR *, mtype_t, const char *, ...)); void msgq_str __P((SCR *, mtype_t, char *, char *)); void mod_rpt __P((SCR *)); void msgq_status __P((SCR *, recno_t, u_int)); int msg_open __P((SCR *, char *)); void msg_close __P((GS *)); const char *msg_cmsg __P((SCR *, cmsg_t, size_t *)); const char *msg_cat __P((SCR *, const char *, size_t *)); char *msg_print __P((SCR *, const char *, int *)); int opts_init __P((SCR *, int *)); int opts_set __P((SCR *, ARGS *[], char *)); int o_set __P((SCR *, int, u_int, char *, u_long)); int opts_empty __P((SCR *, int, int)); void opts_dump __P((SCR *, enum optdisp)); int opts_save __P((SCR *, FILE *)); OPTLIST const *opts_search __P((char *)); void opts_nomatch __P((SCR *, char *)); int opts_copy __P((SCR *, SCR *)); void opts_free __P((SCR *)); int f_altwerase __P((SCR *, OPTION *, char *, u_long *)); int f_columns __P((SCR *, OPTION *, char *, u_long *)); int f_lines __P((SCR *, OPTION *, char *, u_long *)); int f_lisp __P((SCR *, OPTION *, char *, u_long *)); int f_msgcat __P((SCR *, OPTION *, char *, u_long *)); int f_paragraph __P((SCR *, OPTION *, char *, u_long *)); int f_print __P((SCR *, OPTION *, char *, u_long *)); int f_readonly __P((SCR *, OPTION *, char *, u_long *)); int f_recompile __P((SCR *, OPTION *, char *, u_long *)); int f_reformat __P((SCR *, OPTION *, char *, u_long *)); int f_section __P((SCR *, OPTION *, char *, u_long *)); int f_ttywerase __P((SCR *, OPTION *, char *, u_long *)); int f_w300 __P((SCR *, OPTION *, char *, u_long *)); int f_w1200 __P((SCR *, OPTION *, char *, u_long *)); int f_w9600 __P((SCR *, OPTION *, char *, u_long *)); int f_window __P((SCR *, OPTION *, char *, u_long *)); int put __P((SCR *, CB *, CHAR_T *, MARK *, MARK *, int)); int rcv_tmp __P((SCR *, EXF *, char *)); int rcv_init __P((SCR *)); int rcv_sync __P((SCR *, u_int)); int rcv_list __P((SCR *)); int rcv_read __P((SCR *, FREF *)); int screen_init __P((GS *, SCR *, SCR **)); int screen_end __P((SCR *)); SCR *screen_next __P((SCR *)); int f_search __P((SCR *, MARK *, MARK *, char *, size_t, char **, u_int)); int b_search __P((SCR *, MARK *, MARK *, char *, size_t, char **, u_int)); void search_busy __P((SCR *, busy_t)); int seq_set __P((SCR *, CHAR_T *, size_t, CHAR_T *, size_t, CHAR_T *, size_t, seq_t, int)); int seq_delete __P((SCR *, CHAR_T *, size_t, seq_t)); int seq_mdel __P((SEQ *)); SEQ *seq_find __P((SCR *, SEQ **, EVENT *, CHAR_T *, size_t, seq_t, int *)); void seq_close __P((GS *)); int seq_dump __P((SCR *, seq_t, int)); int seq_save __P((SCR *, FILE *, char *, seq_t)); int e_memcmp __P((CHAR_T *, EVENT *, size_t)); void *binc __P((SCR *, void *, size_t *, size_t)); int nonblank __P((SCR *, recno_t, size_t *)); char *tail __P((char *)); CHAR_T *v_strdup __P((SCR *, const CHAR_T *, size_t)); enum nresult nget_uslong __P((u_long *, const char *, char **, int)); enum nresult nget_slong __P((long *, const char *, char **, int)); void TRACE __P((SCR *, const char *, ...)); vigor-0.016.orig/include/ex_def.h0100644000076400007640000000270507103707216015323 0ustar cjw44cjw44#define C_SCROLL 0 #define C_BANG 1 #define C_HASH 2 #define C_SUBAGAIN 3 #define C_STAR 4 #define C_SHIFTL 5 #define C_EQUAL 6 #define C_SHIFTR 7 #define C_AT 8 #define C_APPEND 9 #define C_ABBR 10 #define C_ARGS 11 #define C_BG 12 #define C_CHANGE 13 #define C_CD 14 #define C_CHDIR 15 #define C_COPY 16 #define C_CSCOPE 17 #define C_DELETE 18 #define C_DISPLAY 19 #define C_EDIT 20 #define C_EX 21 #define C_EXUSAGE 22 #define C_FILE 23 #define C_FG 24 #define C_GLOBAL 25 #define C_HELP 26 #define C_INSERT 27 #define C_JOIN 28 #define C_K 29 #define C_LIST 30 #define C_MOVE 31 #define C_MARK 32 #define C_MAP 33 #define C_MKEXRC 34 #define C_NEXT 35 #define C_NUMBER 36 #define C_OPEN 37 #define C_PRINT 38 #define C_PERLCMD 39 #define C_PERLDOCMD 40 #define C_PRESERVE 41 #define C_PREVIOUS 42 #define C_PUT 43 #define C_QUIT 44 #define C_READ 45 #define C_RECOVER 46 #define C_RESIZE 47 #define C_REWIND 48 #define C_SUBSTITUTE 49 #define C_SCRIPT 50 #define C_SET 51 #define C_SHELL 52 #define C_SOURCE 53 #define C_STOP 54 #define C_SUSPEND 55 #define C_T 56 #define C_TAG 57 #define C_TAGNEXT 58 #define C_TAGPOP 59 #define C_TAGPREV 60 #define C_TAGTOP 61 #define C_TCLCMD 62 #define C_UNDO 63 #define C_UNABBREVIATE 64 #define C_UNMAP 65 #define C_V 66 #define C_VERSION 67 #define C_VISUAL_EX 68 #define C_VISUAL_VI 69 #define C_VIUSAGE 70 #define C_WRITE 71 #define C_WN 72 #define C_WQ 73 #define C_XIT 74 #define C_YANK 75 #define C_Z 76 #define C_SUBTILDE 77 vigor-0.016.orig/include/ex_extern.h0100644000076400007640000001152607103707216016073 0ustar cjw44cjw44int ex __P((SCR **)); int ex_cmd __P((SCR *)); int ex_range __P((SCR *, EXCMD *, int *)); int ex_is_abbrev __P((char *, size_t)); int ex_is_unmap __P((char *, size_t)); void ex_badaddr __P((SCR *, EXCMDLIST const *, enum badaddr, enum nresult)); int ex_abbr __P((SCR *, EXCMD *)); int ex_unabbr __P((SCR *, EXCMD *)); int ex_append __P((SCR *, EXCMD *)); int ex_change __P((SCR *, EXCMD *)); int ex_insert __P((SCR *, EXCMD *)); int ex_next __P((SCR *, EXCMD *)); int ex_prev __P((SCR *, EXCMD *)); int ex_rew __P((SCR *, EXCMD *)); int ex_args __P((SCR *, EXCMD *)); char **ex_buildargv __P((SCR *, EXCMD *, char *)); int argv_init __P((SCR *, EXCMD *)); int argv_exp0 __P((SCR *, EXCMD *, char *, size_t)); int argv_exp1 __P((SCR *, EXCMD *, char *, size_t, int)); int argv_exp2 __P((SCR *, EXCMD *, char *, size_t)); int argv_exp3 __P((SCR *, EXCMD *, char *, size_t)); int argv_free __P((SCR *)); int ex_at __P((SCR *, EXCMD *)); int ex_bang __P((SCR *, EXCMD *)); int ex_cd __P((SCR *, EXCMD *)); int ex_cscope __P((SCR *, EXCMD *)); int cscope_display __P((SCR *)); int cscope_search __P((SCR *, TAGQ *, TAG *)); int ex_delete __P((SCR *, EXCMD *)); int ex_display __P((SCR *, EXCMD *)); int ex_edit __P((SCR *, EXCMD *)); int ex_equal __P((SCR *, EXCMD *)); int ex_file __P((SCR *, EXCMD *)); int ex_filter __P((SCR *, EXCMD *, MARK *, MARK *, MARK *, char *, enum filtertype)); int ex_global __P((SCR *, EXCMD *)); int ex_v __P((SCR *, EXCMD *)); int ex_g_insdel __P((SCR *, lnop_t, recno_t)); int ex_screen_copy __P((SCR *, SCR *)); int ex_screen_end __P((SCR *)); int ex_optchange __P((SCR *, int, char *, u_long *)); int ex_exrc __P((SCR *)); int ex_run_str __P((SCR *, char *, char *, size_t, int, int)); int ex_join __P((SCR *, EXCMD *)); int ex_map __P((SCR *, EXCMD *)); int ex_unmap __P((SCR *, EXCMD *)); int ex_mark __P((SCR *, EXCMD *)); int ex_mkexrc __P((SCR *, EXCMD *)); int ex_copy __P((SCR *, EXCMD *)); int ex_move __P((SCR *, EXCMD *)); int ex_open __P((SCR *, EXCMD *)); int ex_perl __P((SCR*, EXCMD *)); int ex_preserve __P((SCR *, EXCMD *)); int ex_recover __P((SCR *, EXCMD *)); int ex_list __P((SCR *, EXCMD *)); int ex_number __P((SCR *, EXCMD *)); int ex_pr __P((SCR *, EXCMD *)); int ex_print __P((SCR *, EXCMD *, MARK *, MARK *, u_int32_t)); int ex_ldisplay __P((SCR *, const char *, size_t, size_t, u_int)); int ex_scprint __P((SCR *, MARK *, MARK *)); int ex_printf __P((SCR *, const char *, ...)); int ex_puts __P((SCR *, const char *)); int ex_fflush __P((SCR *sp)); int ex_put __P((SCR *, EXCMD *)); int ex_quit __P((SCR *, EXCMD *)); int ex_read __P((SCR *, EXCMD *)); int ex_readfp __P((SCR *, char *, FILE *, MARK *, recno_t *, int)); int ex_bg __P((SCR *, EXCMD *)); int ex_fg __P((SCR *, EXCMD *)); int ex_resize __P((SCR *, EXCMD *)); int ex_sdisplay __P((SCR *)); int ex_script __P((SCR *, EXCMD *)); int sscr_exec __P((SCR *, recno_t)); int sscr_input __P((SCR *)); int sscr_end __P((SCR *)); int ex_set __P((SCR *, EXCMD *)); int ex_shell __P((SCR *, EXCMD *)); int ex_exec_proc __P((SCR *, EXCMD *, char *, const char *, int)); int proc_wait __P((SCR *, long, const char *, int, int)); int ex_shiftl __P((SCR *, EXCMD *)); int ex_shiftr __P((SCR *, EXCMD *)); int ex_source __P((SCR *, EXCMD *)); int ex_stop __P((SCR *, EXCMD *)); int ex_s __P((SCR *, EXCMD *)); int ex_subagain __P((SCR *, EXCMD *)); int ex_subtilde __P((SCR *, EXCMD *)); int re_compile __P((SCR *, char *, size_t, char **, size_t *, regex_t *, u_int)); void re_error __P((SCR *, int, regex_t *)); int ex_tag_first __P((SCR *, char *)); int ex_tag_push __P((SCR *, EXCMD *)); int ex_tag_next __P((SCR *, EXCMD *)); int ex_tag_prev __P((SCR *, EXCMD *)); int ex_tag_nswitch __P((SCR *, TAG *, int)); int ex_tag_Nswitch __P((SCR *, TAG *, int)); int ex_tag_pop __P((SCR *, EXCMD *)); int ex_tag_top __P((SCR *, EXCMD *)); int ex_tag_display __P((SCR *)); int ex_tag_copy __P((SCR *, SCR *)); int tagq_free __P((SCR *, TAGQ *)); void tag_msg __P((SCR *, tagmsg_t, char *)); int ex_tagf_alloc __P((SCR *, char *)); int ex_tag_free __P((SCR *)); int ex_tcl __P((SCR*, EXCMD *)); int ex_txt __P((SCR *, TEXTH *, ARG_CHAR_T, u_int32_t)); int ex_undo __P((SCR *, EXCMD *)); int ex_help __P((SCR *, EXCMD *)); int ex_usage __P((SCR *, EXCMD *)); int ex_viusage __P((SCR *, EXCMD *)); void ex_cinit __P((EXCMD *, int, int, recno_t, recno_t, int, ARGS **)); void ex_cadd __P((EXCMD *, ARGS *, char *, size_t)); int ex_getline __P((SCR *, FILE *, size_t *)); int ex_ncheck __P((SCR *, int)); int ex_init __P((SCR *)); void ex_emsg __P((SCR *, char *, exm_t)); int ex_version __P((SCR *, EXCMD *)); int ex_visual __P((SCR *, EXCMD *)); int ex_wn __P((SCR *, EXCMD *)); int ex_wq __P((SCR *, EXCMD *)); int ex_write __P((SCR *, EXCMD *)); int ex_xit __P((SCR *, EXCMD *)); int ex_writefp __P((SCR *, char *, FILE *, MARK *, MARK *, u_long *, u_long *, int)); int ex_yank __P((SCR *, EXCMD *)); int ex_z __P((SCR *, EXCMD *)); vigor-0.016.orig/include/options_def.h0100644000076400007640000000317007103707216016377 0ustar cjw44cjw44#define O_ALTWERASE 0 #define O_AUTOINDENT 1 #define O_AUTOPRINT 2 #define O_AUTOWRITE 3 #define O_BACKUP 4 #define O_BEAUTIFY 5 #define O_CDPATH 6 #define O_CEDIT 7 #define O_COLUMNS 8 #define O_COMMENT 9 #define O_DIRECTORY 10 #define O_EDCOMPATIBLE 11 #define O_ESCAPETIME 12 #define O_ERRORBELLS 13 #define O_EXRC 14 #define O_EXTENDED 15 #define O_FILEC 16 #define O_FLASH 17 #define O_HARDTABS 18 #define O_ICLOWER 19 #define O_IGNORECASE 20 #define O_KEYTIME 21 #define O_LEFTRIGHT 22 #define O_LINES 23 #define O_LISP 24 #define O_LIST 25 #define O_LOCKFILES 26 #define O_MAGIC 27 #define O_MATCHTIME 28 #define O_MESG 29 #define O_MODELINE 30 #define O_MSGCAT 31 #define O_NOPRINT 32 #define O_NUMBER 33 #define O_OCTAL 34 #define O_OPEN 35 #define O_OPTIMIZE 36 #define O_PARAGRAPHS 37 #define O_PATH 38 #define O_PRINT 39 #define O_PROMPT 40 #define O_READONLY 41 #define O_RECDIR 42 #define O_REDRAW 43 #define O_REMAP 44 #define O_REPORT 45 #define O_RULER 46 #define O_SCROLL 47 #define O_SEARCHINCR 48 #define O_SECTIONS 49 #define O_SECURE 50 #define O_SHELL 51 #define O_SHELLMETA 52 #define O_SHIFTWIDTH 53 #define O_SHOWMATCH 54 #define O_SHOWMODE 55 #define O_SIDESCROLL 56 #define O_SLOWOPEN 57 #define O_SOURCEANY 58 #define O_TABSTOP 59 #define O_TAGLENGTH 60 #define O_TAGS 61 #define O_TERM 62 #define O_TERSE 63 #define O_TILDEOP 64 #define O_TIMEOUT 65 #define O_TTYWERASE 66 #define O_VERBOSE 67 #define O_W1200 68 #define O_W300 69 #define O_W9600 70 #define O_WARN 71 #define O_WINDOW 72 #define O_WINDOWNAME 73 #define O_WRAPLEN 74 #define O_WRAPMARGIN 75 #define O_WRAPSCAN 76 #define O_WRITEANY 77 #define O_OPTIONCOUNT 78 vigor-0.016.orig/include/perl_extern.h0100644000076400007640000000042607103707216016416 0ustar cjw44cjw44int perl_end __P((GS *)); int perl_init __P((SCR *)); int perl_screen_end __P((SCR*)); int perl_ex_perl __P((SCR*, CHAR_T *, size_t, recno_t, recno_t)); int perl_ex_perldo __P((SCR*, CHAR_T *, size_t, recno_t, recno_t)); #ifdef USE_SFIO Sfdisc_t* sfdcnewnvi __P((SCR*)); #endif vigor-0.016.orig/include/tcl_extern.h0100644000076400007640000000003207103707216016227 0ustar cjw44cjw44int tcl_init __P((GS *)); vigor-0.016.orig/include/tk_extern.h0100644000076400007640000000237307103707216016075 0ustar cjw44cjw44int tk_addstr __P((SCR *, const char *, size_t)); int tk_attr __P((SCR *, scr_attr_t, int)); int tk_baud __P((SCR *, u_long *)); int tk_bell __P((SCR *)); int tk_clrtoeol __P((SCR *)); int tk_cursor __P((SCR *, size_t *, size_t *)); int tk_deleteln __P((SCR *)); int tk_ex_adjust __P((SCR *, exadj_t)); int tk_insertln __P((SCR *)); int tk_keyval __P((SCR *, scr_keyval_t, CHAR_T *, int *)); int tk_move __P((SCR *, size_t, size_t)); int tk_refresh __P((SCR *, int)); int tk_rename __P((SCR *)); int tk_suspend __P((SCR *, int *)); void tk_usage __P((void)); int tk_event __P((SCR *, EVENT *, u_int32_t, int)); int tk_key __P((ClientData, Tcl_Interp *, int, char *[])); int tk_screen __P((SCR *, u_int32_t)); int tk_quit __P((GS *)); int tk_term_init __P((SCR *)); int tk_term_end __P((GS *)); int tk_fmap __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); int tk_optchange __P((SCR *, int, char *, u_long *)); int tk_ssize __P((SCR *, int, size_t *, size_t *, int *)); int tk_op __P((ClientData, Tcl_Interp *, int, char *[])); int tk_opt_init __P((ClientData, Tcl_Interp *, int, char *[])); int tk_opt_set __P((ClientData, Tcl_Interp *, int, char *[])); int tk_version __P((ClientData, Tcl_Interp *, int, char *[])); void tk_msg __P((SCR *, mtype_t, char *, size_t)); vigor-0.016.orig/include/vi_extern.h0100644000076400007640000001233307103707216016072 0ustar cjw44cjw44int cs_init __P((SCR *, VCS *)); int cs_next __P((SCR *, VCS *)); int cs_fspace __P((SCR *, VCS *)); int cs_fblank __P((SCR *, VCS *)); int cs_prev __P((SCR *, VCS *)); int cs_bblank __P((SCR *, VCS *)); int v_at __P((SCR *, VICMD *)); int v_chrepeat __P((SCR *, VICMD *)); int v_chrrepeat __P((SCR *, VICMD *)); int v_cht __P((SCR *, VICMD *)); int v_chf __P((SCR *, VICMD *)); int v_chT __P((SCR *, VICMD *)); int v_chF __P((SCR *, VICMD *)); int v_delete __P((SCR *, VICMD *)); int v_again __P((SCR *, VICMD *)); int v_exmode __P((SCR *, VICMD *)); int v_join __P((SCR *, VICMD *)); int v_shiftl __P((SCR *, VICMD *)); int v_shiftr __P((SCR *, VICMD *)); int v_suspend __P((SCR *, VICMD *)); int v_switch __P((SCR *, VICMD *)); int v_tagpush __P((SCR *, VICMD *)); int v_tagpop __P((SCR *, VICMD *)); int v_filter __P((SCR *, VICMD *)); int v_event_exec __P((SCR *, VICMD *)); int v_ex __P((SCR *, VICMD *)); int v_ecl_exec __P((SCR *)); int v_increment __P((SCR *, VICMD *)); int v_screen_copy __P((SCR *, SCR *)); int v_screen_end __P((SCR *)); int v_optchange __P((SCR *, int, char *, u_long *)); int v_iA __P((SCR *, VICMD *)); int v_ia __P((SCR *, VICMD *)); int v_iI __P((SCR *, VICMD *)); int v_ii __P((SCR *, VICMD *)); int v_iO __P((SCR *, VICMD *)); int v_io __P((SCR *, VICMD *)); int v_change __P((SCR *, VICMD *)); int v_Replace __P((SCR *, VICMD *)); int v_subst __P((SCR *, VICMD *)); int v_left __P((SCR *, VICMD *)); int v_cfirst __P((SCR *, VICMD *)); int v_first __P((SCR *, VICMD *)); int v_ncol __P((SCR *, VICMD *)); int v_zero __P((SCR *, VICMD *)); int v_mark __P((SCR *, VICMD *)); int v_bmark __P((SCR *, VICMD *)); int v_fmark __P((SCR *, VICMD *)); int v_match __P((SCR *, VICMD *)); int v_paragraphf __P((SCR *, VICMD *)); int v_paragraphb __P((SCR *, VICMD *)); int v_buildps __P((SCR *, char *, char *)); int v_Put __P((SCR *, VICMD *)); int v_put __P((SCR *, VICMD *)); int v_redraw __P((SCR *, VICMD *)); int v_replace __P((SCR *, VICMD *)); int v_right __P((SCR *, VICMD *)); int v_dollar __P((SCR *, VICMD *)); int v_screen __P((SCR *, VICMD *)); int v_lgoto __P((SCR *, VICMD *)); int v_home __P((SCR *, VICMD *)); int v_middle __P((SCR *, VICMD *)); int v_bottom __P((SCR *, VICMD *)); int v_up __P((SCR *, VICMD *)); int v_cr __P((SCR *, VICMD *)); int v_down __P((SCR *, VICMD *)); int v_hpageup __P((SCR *, VICMD *)); int v_hpagedown __P((SCR *, VICMD *)); int v_pagedown __P((SCR *, VICMD *)); int v_pageup __P((SCR *, VICMD *)); int v_lineup __P((SCR *, VICMD *)); int v_linedown __P((SCR *, VICMD *)); int v_searchb __P((SCR *, VICMD *)); int v_searchf __P((SCR *, VICMD *)); int v_searchN __P((SCR *, VICMD *)); int v_searchn __P((SCR *, VICMD *)); int v_searchw __P((SCR *, VICMD *)); int v_correct __P((SCR *, VICMD *, int)); int v_sectionf __P((SCR *, VICMD *)); int v_sectionb __P((SCR *, VICMD *)); int v_sentencef __P((SCR *, VICMD *)); int v_sentenceb __P((SCR *, VICMD *)); int v_status __P((SCR *, VICMD *)); int v_tcmd __P((SCR *, VICMD *, ARG_CHAR_T, u_int)); int v_txt __P((SCR *, VICMD *, MARK *, const char *, size_t, ARG_CHAR_T, recno_t, u_long, u_int32_t)); int v_txt_auto __P((SCR *, recno_t, TEXT *, size_t, TEXT *)); int v_ulcase __P((SCR *, VICMD *)); int v_mulcase __P((SCR *, VICMD *)); int v_Undo __P((SCR *, VICMD *)); int v_undo __P((SCR *, VICMD *)); void v_eof __P((SCR *, MARK *)); void v_eol __P((SCR *, MARK *)); void v_nomove __P((SCR *)); void v_sof __P((SCR *, MARK *)); void v_sol __P((SCR *)); int v_isempty __P((char *, size_t)); void v_emsg __P((SCR *, char *, vim_t)); int v_wordW __P((SCR *, VICMD *)); int v_wordw __P((SCR *, VICMD *)); int v_wordE __P((SCR *, VICMD *)); int v_worde __P((SCR *, VICMD *)); int v_wordB __P((SCR *, VICMD *)); int v_wordb __P((SCR *, VICMD *)); int v_xchar __P((SCR *, VICMD *)); int v_Xchar __P((SCR *, VICMD *)); int v_yank __P((SCR *, VICMD *)); int v_z __P((SCR *, VICMD *)); int vs_crel __P((SCR *, long)); int v_zexit __P((SCR *, VICMD *)); int vi __P((SCR **)); int vs_line __P((SCR *, SMAP *, size_t *, size_t *)); int vs_number __P((SCR *)); void vs_busy __P((SCR *, const char *, busy_t)); void vs_home __P((SCR *)); void vs_update __P((SCR *, const char *, const char *)); void vs_msg __P((SCR *, mtype_t, char *, size_t)); int vs_ex_resolve __P((SCR *, int *)); int vs_resolve __P((SCR *, SCR *, int)); int vs_repaint __P((SCR *, EVENT *)); int vs_refresh __P((SCR *, int)); int vs_column __P((SCR *, size_t *)); size_t vs_screens __P((SCR *, recno_t, size_t *)); size_t vs_columns __P((SCR *, char *, recno_t, size_t *, size_t *)); size_t vs_rcm __P((SCR *, recno_t, int)); size_t vs_colpos __P((SCR *, recno_t, size_t)); int vs_change __P((SCR *, recno_t, lnop_t)); int vs_sm_fill __P((SCR *, recno_t, pos_t)); int vs_sm_scroll __P((SCR *, MARK *, recno_t, scroll_t)); int vs_sm_1up __P((SCR *)); int vs_sm_1down __P((SCR *)); int vs_sm_next __P((SCR *, SMAP *, SMAP *)); int vs_sm_prev __P((SCR *, SMAP *, SMAP *)); int vs_sm_cursor __P((SCR *, SMAP **)); int vs_sm_position __P((SCR *, MARK *, u_long, pos_t)); recno_t vs_sm_nlines __P((SCR *, SMAP *, recno_t, size_t)); int vs_split __P((SCR *, SCR *, int)); int vs_discard __P((SCR *, SCR **)); int vs_fg __P((SCR *, SCR **, CHAR_T *, int)); int vs_bg __P((SCR *)); int vs_swap __P((SCR *, SCR **, char *)); int vs_resize __P((SCR *, long, adj_t)); vigor-0.016.orig/include/tags0120777000076400007640000000000007107504605016770 2../build/tagsustar cjw44cjw44vigor-0.016.orig/include/ip_extern.h0100644000076400007640000000161307103707216016063 0ustar cjw44cjw44int ip_addstr __P((SCR *, const char *, size_t)); int ip_attr __P((SCR *, scr_attr_t, int)); int ip_baud __P((SCR *, u_long *)); int ip_bell __P((SCR *)); void ip_busy __P((SCR *, const char *, busy_t)); int ip_clrtoeol __P((SCR *)); int ip_cursor __P((SCR *, size_t *, size_t *)); int ip_deleteln __P((SCR *)); int ip_ex_adjust __P((SCR *, exadj_t)); int ip_insertln __P((SCR *)); int ip_keyval __P((SCR *, scr_keyval_t, CHAR_T *, int *)); int ip_move __P((SCR *, size_t, size_t)); int ip_refresh __P((SCR *, int)); int ip_rename __P((SCR *)); int ip_suspend __P((SCR *, int *)); void ip_usage __P((void)); int ip_event __P((SCR *, EVENT *, u_int32_t, int)); int ip_screen __P((SCR *, u_int32_t)); int ip_quit __P((GS *)); int ip_term_init __P((SCR *)); int ip_term_end __P((GS *)); int ip_fmap __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); int ip_optchange __P((SCR *, int, char *, u_long *)); vigor-0.016.orig/include/vigor_extern.h0100644000076400007640000000054507103707216016604 0ustar cjw44cjw44int vigor_init __P((GS *)); void vigor_comment __P((char *expr, GS *gp)); void vigor_confirm __P((char *expr, GS *gp)); void vigor_maybe_confirm __P((int prob, char *expr, GS *gp)); void vigor_maybe_wizard __P((int prob, char *wizname, char *task0, char *task1, char *task2, int this_task, char *descr, GS *gp)); void vigor_gotchar __P((char ch)); vigor-0.016.orig/catalog/0040755000076400007640000000000007103707217013707 5ustar cjw44cjw44vigor-0.016.orig/catalog/swedish.check0100644000076400007640000000162207103707216016351 0ustar cjw44cjw44Unused message id's (this is okay): 001 047 050 051 052 081 176 213 229 288 ========================= MISSING ERROR MESSAGES (Please add!): ========================= Extra error messages (just delete them): ========================= MESSAGES WITH THE SAME MESSAGE ID's (FIX!): ========================= Duplicate messages, both id and message (this is okay): ========================= Duplicate messages, just message (this is okay): 2 %s expanderade till för många filnamnX 2 %s: %lu rader, %lu teckenX 2 %s: Återskapningsfilen är korruptX 2 Filen har ändrats efter den sparats; spara eller använd !X 2 Ingen tidigare söksträngX 2 Kopierar filen för återskapning...X 2 Loggning utförs inte, ångra är inte möjligtX 2 flyttadeX 2 set: %s flaggan är inte boleanskX 2 Ändringar kan inte återskapas om programmet krascharX 3 %s: ta bortX 4 Användning: %sX ========================= vigor-0.016.orig/catalog/dump.c0100644000076400007640000000617007103707216015020 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char copyright[] = "@(#) Copyright (c) 1992, 1993, 1994\n\ The Regents of the University of California. All rights reserved.\n"; #endif /* not lint */ #ifndef lint static char sccsid[] = "@(#)dump.c 8.1 (Berkeley) 8/31/94"; #endif /* not lint */ #include #include static void parse(fp) FILE *fp; { int ch, s1, s2, s3; #define TESTD(s) { \ if ((s = getc(fp)) == EOF) \ return; \ if (!isdigit(s)) \ continue; \ } #define TESTP { \ if ((ch = getc(fp)) == EOF) \ return; \ if (ch != '|') \ continue; \ } #define MOVEC(t) { \ do { \ if ((ch = getc(fp)) == EOF) \ return; \ } while (ch != (t)); \ } for (;;) { MOVEC('"'); TESTD(s1); TESTD(s2); TESTD(s3); TESTP; putchar('"'); putchar(s1); putchar(s2); putchar(s3); putchar('|'); for (;;) { /* dump to end quote. */ if ((ch = getc(fp)) == EOF) return; putchar(ch); if (ch == '"') break; if (ch == '\\') { if ((ch = getc(fp)) == EOF) return; putchar(ch); } } putchar('\n'); } } int main(argc, argv) int argc; char *argv[]; { FILE *fp; for (; *argv != NULL; ++argv) { if ((fp = fopen(*argv, "r")) == NULL) { perror(*argv); exit (1); } parse(fp); (void)fclose(fp); } exit (0); } vigor-0.016.orig/catalog/Makefile0100644000076400007640000000471407103707216015351 0ustar cjw44cjw44# @(#)Makefile 8.29 (Berkeley) 10/19/96 CAT= dutch english french german ru_SU.KOI8-R spanish swedish FILES= ../cl/*.c ../common/*.c ../ex/*.c ../tk/*.c ../vi/*.c all: dump ${CAT} ${CAT}: english.base @echo "... $@"; \ rm -f $@; \ sort -u $@.base | \ awk '{ \ if ($$1 == 1) { \ print "\nMESSAGE NUMBER 1 IS NOT LEGAL"; \ exit 1; \ } \ if (++nline > $$1) { \ print "DUPLICATE MESSAGE NUMBER " $$1; \ exit 1; \ } \ for (; nline < $$1; ++nline) \ print ""; \ print $0; \ }' | \ sed -e '1s/^/VI_MESSAGE_CATALOG/' \ -e '/"/s/^[^"]*"//' \ -e '1!s/"$$/X/' > $@; \ chmod 444 $@; \ if grep DUPLICATE $@ > /dev/null; then \ grep DUPLICATE $@; \ fi; \ if grep 'NOT LEGAL' $@ > /dev/null; then \ grep 'NOT LEGAL' $@; \ fi CHK= dutch.check english.check french.check german.check \ ru_SU.KOI8-R.check spanish.check swedish.check check: ${CHK} ${CHK}: ${CAT} @echo "... $@"; \ f=`basename $@ .check`; \ (echo "Unused message id's (this is okay):"; \ awk '{ \ while (++nline < $$1) \ printf "%03d\n", nline; \ }' < $$f.base; \ echo =========================; \ echo "MISSING ERROR MESSAGES (Please add!):"; \ awk '{print $$1}' < $$f.base | sort -u > __ck1; \ awk '{print $$1}' < english.base | sort -u > __ck2; \ comm -13 __ck1 __ck2; \ echo =========================; \ echo "Extra error messages (just delete them):"; \ comm -23 __ck1 __ck2; \ echo =========================; \ echo "MESSAGES WITH THE SAME MESSAGE ID's (FIX!):"; \ for j in \ `sed '/^$$/d' < $$f.base | sort -u | \ awk '{print $$1}' | uniq -d`; do \ egrep $$j $$f.base; \ done; \ echo =========================; \ echo "Duplicate messages, both id and message (this is okay):"; \ sed '/^$$/d' < $$f.base | sort | uniq -c | \ awk '$$1 != 1 { print $$0 }' | sort -n; \ echo =========================; \ echo "Duplicate messages, just message (this is okay):"; \ sed '/^$$/d' < $$f | sort | uniq -c | \ awk '$$1 != 1 { print $$0 }' | sort -n; \ echo =========================) > $@ english.base: dump ${FILES} #Makefile ./dump ${FILES} |\ sed -e '/|/!d' \ -e 's/|/ "/' \ -e 's/^"//' \ -e 's/\\"/"/g' |\ sort -n > $@ dump: dump.c ${CC} -O -o dump dump.c clean: rm -f dump dump.o ${CAT} english.base *.check __ck1 __ck2 vigor-0.016.orig/catalog/spell.ok0100644000076400007640000000016707103707216015361 0ustar cjw44cjw44ARGMAX LC NL XXXX arg1 arg2 chys english english.base german.base langauge msg msg.c msgcat msgq nvi nvi's pathname sp vigor-0.016.orig/catalog/spanish.base0100644000076400007640000003347707103707216016222 0ustar cjw44cjw44002 "Desbordamiento de longitud de l¡nea" 003 "no se puede borrar la l¡nea %lu" 004 "no se puede a¤adir la l¡nea %lu" 005 "no se puede insertar en la l¡nea %lu" 006 "no se puede guardar la l¡nea %lu" 007 "no se puede obtener la £ltima l¡nea" 008 "Error: no se puede recuperar la l¡nea %lu" 009 "Archivo de log" 010 "No se realiza log, no se puede deshacer" 011 "No hay cambios para deshacer" 012 "No se realiza log, no se puede deshacer" 013 "No se realiza log, no se puede remontar hacia adelante" 014 "No hay cambios para rehacer" 015 "%s/%d: error de log" 016 "La entrada y salida est ndar de Vi debe ser una terminal" 017 "Marcar %s: no determinado" 018 "Marcar %s: se borr¢ la l¡nea" 019 "Marcar %s: la posici¢n del cursor ya no existe" 020 "Error: " 021 "nuevo archivo" 022 "nombre cambiado" 023 "modificado" 024 "no modificado" 025 "DESTRABADO" 026 "lectura solamente" 027 "l¡nea %lu de %lu [%ld%%]" 028 "archivo vac¡o" 029 "l¡nea %lu" 030 "El archivo %s no es un cat logo de mensajes" 031 "No se puede determinar la opci¢n por omisi¢n %s" 032 "Uso: %s" 033 "determinar: no hay opci¢n %s: 'determinar todo' establece todos los valores de opci¢n" 034 "determinar: [no] hay opci¢n %s no tiene valor" 035 "determinar: opci¢n %s no es booleano" 036 "determinar: opci¢n %s: %s" 037 "determinar: opci¢n %s: %s: desbordamiento de valores" 038 "determinar: opci¢n %s: %s es un n£mero ilegal" 039 "determinar: opci¢n %s no es booleano" 040 "Las columnas en pantalla son demasiado peque¤as, menos de %d" 041 "Las columnas en pantalla son demasiado grandes, m s de %d" 042 "Las l¡neas en pantalla son demasiado peque¤as, menos de %d" 043 "Las l¡neas en pantalla son demasiado grandes, m s de %d" 044 "La opci¢n lisp no est  implementada" 045 "mensajes no desconectados: %s" 046 "mensajes no conectados: %s" 048 "La opci¢n de p rrafo debe estar en dos grupos de caracteres" 049 "La opci¢n de secci¢n debe estar en dos grupos de caracteres" 053 "El buffer por omisi¢n est  vac¡o" 054 "El buffer %s est  vac¡o" 055 "Los archivos con nuevas l¡neas en el nombre son irrecuperables" 056 "Las modificaciones no pueden recuperarse si la sesi¢n falla" 057 "Copiando archivo para recuperaci¢n..." 058 "Preservaci¢n fracasada: %s" 059 "Las modificaciones no pueden recuperarse si la sesi¢n falla" 060 "Archivo de respaldo fracasado: %s" 061 "Copiando archivo para recuperaci¢n..." 062 "Informaci¢n sobre identificaci¢n del usuario %u no encontrada" 063 "No se puede trabar archivo de recuperaci¢n" 064 "Desbordamiento de buffer de archivo de recuperaci¢n" 065 "Archivo de recuperaci¢n" 066 "%s: archivo de recuperaci¢n defectuoso" 067 "%s: archivo de recuperaci¢n defectuoso" 068 "No hay archivos denominados %s, que usted pueda leer, para recuperar" 069 "Existen versiones m s antiguas de este archivo que usted puede recuperar" 070 "Existen otros archivos que usted puede recuperar" 071 "no env¡a email: %s" 072 "Archivo vac¡o; no hay nada para buscar" 073 "Se alcanz¢ el final del archivo sin encontrar el patr¢n" 074 "No hay patr¢n anterior de b£squeda" 075 "No se encontr¢ el patr¢n" 076 " Se alcanz¢ el principio del archivo sin encontrar el patr¢n" 077 "B£squeda reiniciada" 078 "Buscando..." 079 "No se encontr¢ ning£n car cter no imprimible" 080 "Nombre de comando desconocido" 082 "%s: comando no disponible en modalidad ex" 083 "La cuenta no puede ser cero" 084 "%s: mala especificaci¢n de l¡nea" 085 "Error interno de tabla de sintaxis (%s: %s)" 086 "Uso: %s" 087 "%s: buffer temporario no liberado" 088 "Desplazamiento de marcador a antes de la l¡nea 1" 089 "Desplazamiento de marcador m s all  del final del archivo" 090 "@ con rango que corre cuando se cambia el archivo/la pantalla" 091 "Comando global/v que corre cuando se cambia el archivo/la pantalla" 092 "Comando Ex fracasado: comandos pendientes descartados" 093 "Comando Ex fracasado: teclas mapeadas descartadas" 094 "La segunda direcci¢n es m s peque¤a que la primera" 095 "No se suministra nombre de marca" 096 "\\ no es seguido por / o ?" 097 "Referencia a un n£mero de l¡nea menor que 0" 098 "El comando %s es desconocido" 099 "Desbordamiento de valor de direcci¢n" 100 "Subdesbordamiento de valor de direcci¢n" 101 "Combinaci¢n de direcci¢n ilegal" 102 "Direcci¢n ilegal: s¢lo %lu l¡neas en el archivo" 103 "Direcci¢n ilegal: el archivo est  vac¡o" 104 "El comando %s no permite una direcci¢n de 0" 105 "No hay abreviaturas para visualizar" 106 "Las abreviaturas deben terminar con un car cter de \"palabra\" " 107 "Las abreviaturas no pueden contener tabs o espacios" 108 "Las abreviaturas no pueden mezclar caracteres palabra/no-palabra, salvo al final" 109 "\"%s\" no es una abreviatura" 110 "Comando Vi fracasado: teclas mapeadas descartadas" 111 "No hay m s archivos para editar" 112 "No hay archivos anteriores para editar" 113 "No hay archivos anteriores para rebobinar" 114 "No hay lista de archivos para visualizar" 115 "No hay un comando anterior para reemplazar a \"!\"" 116 "No hay nombre de archivo para sustituir por %%" 117 "No hay nombre de archivo para sustituir por #" 118 "Error: execl: %s" 119 "Error de E/S: %s" 120 "Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterar" 121 "No se puede encontrar la ubicaci¢n del directorio inicial" 122 "Nuevo directorio actual: %s" 123 "No hay buffers sueltos para visualizar" 124 "El comando %s no puede usarse como parte de un comando global o v" 125 "%s/%s: sin fuente: no le pertenece a usted o a ra¡z" 126 "%s/%s: sin fuente: no le pertenece a usted" 127 "%s/%s: sin fuente: puede ser escrito por un usuario que no sea el propietario" 128 "%s: sin fuente: no le pertenece a usted o a ra¡z" 129 "%s: sin fuente: no le pertenece a usted" 130 "%s: sin fuente: puede ser escrito por un usuario que no sea el propietario" 131 "No hay l¡neas siguientes para unir" 132 "No hay anotaciones de mapa de entrada" 133 "No hay anotaciones de mapa de comando" 134 "El car cter %s no puede remapearse" 135 "\"%s\" no est  mapeado actualmente" 136 "Marca de nombres debe ser un s¢lo car cter" 137 "%s existe, no est  escrito; usar ! para alterar" 138 "Nuevo archivo exrc: %s" 139 "La l¡nea de destino se encuentra dentro del rango de movimiento" 140 "El comando abierto requiere que se determine la opci¢n abierta" 141 "El comando abierto no se ha implementado a£n" 142 "No es posible preservar este archivo" 143 "Archivo preservado" 144 "%s: expandido a demasiados nombres de archivo" 145 "S¢lo pueden leerse los archivos regulares y los conductos nombrados" 146 "%s: traba de lectura no disponible" 147 "Leyendo..." 148 "%s: %lu l¡neas, %lu caracteres" 149 "No hay pantallas de fondo para mostrar" 150 "El comando de script s¢lo est  disponible en modalidad vi" 151 "No hay comando para ejecutar" 152 "opci¢n de ancho de desplazamiento en 0" 153 "Desbordamiento de cuenta" 154 "Subdesbordamiento de cuenta" 155 "Expresi¢n regular especificada; marcador r no tiene significado" 156 "Los marcadores #, l y p no pueden combinarse con el marcador c en la modalidad vi" 157 "No se encontr¢ coincidencia" 158 "No se ingres¢ un identificador anterior" 159 "Se encontraron menos de %s anotaciones en la pila de identificadores; usar :visualizar i[dentificadores]" 160 "No hay archivo %s en la pila de identificadores al que se pueda volver; usar :visualizar i[dentificadores]" 161 "Presionar Intro para continuar: " 162 "%s: no se encontr¢ el identificador" 163 "%s: identificador corrompido en %s" 164 "%s: el n£mero de l¡nea del identificador es posterior al final del archivo" 165 "La pila de identificadores est  vac¡a" 166 "%s: patr¢n de b£squeda no encontrado" 167 "%d archivos m s para editar" 168 "El buffer %s est  vac¡o" 169 "¨Confirmar cambio? [n]" 170 "Interrumpido" 171 "No hay buffer anterior para ejecutar" 172 "No hay expresi¢n regular anterior" 173 "El comando %s requiere que se haya le¡do un archivo" 174 "Uso: %s" 175 "El comando visual requiere que se determine la opci¢n abierta" 177 "Archivo vac¡o" 178 "No hay b£squeda F, f, T o t anterior" 179 "%s no se encontr¢" 180 "No hay archivo anterior para editar" 181 "El cursor no est  en un n£mero" 182 "El n£mero resultante es demasiado grande" 183 " El n£mero resultante es demasiado peque¤o" 184 "No hay car cter coincidente en esta l¡nea" 185 "No se encontr¢ un car cter coincidente" 186 "No hay caracteres para reemplazar" 187 "No hay otra pantalla a la que se pueda pasar" 188 "Caracteres despu‚s de cadena de b£squeda, desplazamiento de l¡nea y/o comando z" 189 "No hay patr¢n anterior de b£squeda" 190 "B£squeda vuelve a la posici¢n inicial" 191 "Se super¢ el l¡mite de expansi¢n de abreviatura: se descartaron caracteres" 192 "Car cter ilegal; mencionar para entrar" 193 "Ya se encuentra al principio de la inserci¢n" 194 "No hay m s caracteres para borrar" 195 "Movimiento m s all  del final del archivo" 196 "Movimiento m s all  del final de la l¡nea" 197 "No hay movimiento del cursor" 198 "Ya se encuentra al principio del archivo" 199 "Movimiento m s all  del principio del archivo" 200 "Ya se encuentra en la primera columna" 201 "Los buffers deben especificarse antes del comando" 202 "Ya se encuentra al final del archivo" 203 "Ya se encuentra al final de la l¡nea" 204 "%s no es un comando vi" 205 "Uso: %s" 206 "No hay caracteres para borrar" 207 "El comando Q requiere la interfase de terminal ex" 208 "No hay comando para repetir" 209 "El archivo est  vac¡o" 209 "El archivo est  vac¡o" 210 "%s no puede usarse como comando de movimiento" 211 "Ya se encuentra en modalidad de comando" 212 "El cursor no se encuentra en una palabra" 214 "El valor de opci¢n de Windows es demasiado grande, el m x. es %u" 215 "A¤adir" 216 "Cambiar" 217 "Comando" 218 "Insertar" 219 "Reemplazar" 220 "El movimiento va m s all  del final de la pantalla" 221 "El movimiento va m s all  del principio de la pantalla" 222 "La pantalla debe tener m s de %d l¡neas para dividirse" 223 "No hay pantallas de fondo" 224 "No hay pantalla de fondo editando un archivo denominado %s" 225 "No se puede poner fondo a la £nica pantalla que se visualiza" 226 "La pantalla s¢lo puede reducirse a %d hileras" 227 "La pantalla no puede reducirse" 228 "La pantalla no puede aumentarse" 230 "Esta pantalla no puede suspenderse" 231 "Interrumpido: teclas mapeadas descartadas" 232 "vi: buffer temporario no liberado" 233 "Esta terminal no tiene tecla %s" 234 "S¢lo un buffer puede especificarse" 235 "N£mero mayor que %lu" 236 "Interrumpido" 237 "No se puede crear archivo temporario" 238 "Advertencia: %s no es un archivo regular" 239 "%s ya se encuentra trabado, la sesi¢n es de lectura solamente" 240 "%s: eliminar" 241 "%s: cerrar" 242 "%s: eliminar" 243 "%s: eliminar" 244 "Archivo de lectura solamente, no escrito; usar ! para alterar" 245 " Archivo de lectura solamente, no escrito" 246 "%s existe, no escrito; usar ! para alterar" 247 "%s existe, no escrito" 248 "Archivo parcial, no escrito; usar ! para alterar" 249 "Archivo parcial, no escrito" 250 "%s: archivo modificado m s recientemente que esta copia; usar ! para alterar" 251 "%s: archivo modificado m s recientemente que esta copia" 252 "%s: la traba de escritura no estaba disponible" 253 "Escribiendo..." 254 "%s: ADVERTENCIA: ARCHIVO TRUNCADO" 255 "Ya se encuentra en el primer identificador de este grupo" 256 "%s: nuevo archivo: %lu l¡neas, %lu caracteres" 257 "%s: %lu l¡neas, %lu caracteres" 258 "%s expandido a demasiados nombres de archivos" 259 "%s: no es un archivo regular" 260 "%s: no le pertenece" 261 "%s: accesible por un usuario que no sea el propietario" 262 "Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterar" 263 "Archivo modificado desde la £ltima escritura completa; escribir o usar :editar! para alterar" 264 "Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterar" 265 "El archivo es temporario; al salir se descartar n las modificaciones" 266 "Archivo de lectura solamente, las modificaciones no se autoescriben" 267 "Se reinici¢ el log" 268 "confirmar? [snq]" 269 "Presionar cualquier tecla para continuar: " 270 "Presionar cualquier tecla para continuar [: para ingresar m s comandos ex]: " 271 "Presionar cualquier tecla para continuar [q para salir]: " 272 "Esta forma de %s requiere la interfase terminal ex" 273 "Ingresando en la modalidad de entrada ex." 274 "Comando fracasado, no hay archivo le¡do aun." 275 " cont?" 276 "Evento inesperado de car cter" 277 "Evento inesperado de final de archivo" 278 "No hay coincidencias para consulta" 279 "Evento inesperado de interrupci¢n" 280 "Evento inesperado de salida" 281 "Evento inesperado de repintura" 282 "Ya se encuentra en el £ltimo identificador de este grupo" 283 "El comando %s requiere la interfase terminal ex" 284 "Esta forma de %s no se encuentra soportada cuando se determina la opci¢n de edici¢n segura" 285 "Evento inesperado de cadena" 286 "Evento inesperado de tiempo excedido" 287 "Evento inesperado de escritura" 289 "Las expansiones de shell no se encuentran soportadas cuando se determina la opci¢n de edici¢n segura" 290 "El comando %s no se encuentra soportado cuando se determina la opci¢n de edici¢n segura" 291 "determinar: la opci¢n %s puede no estar desconectada" 292 "El monitor es demasiado peque¤o." 293 "agregado" 294 "cambiado" 295 "borrado" 296 "unido" 297 "movido" 298 "desplazado" 299 "arrancado" 300 "l¡nea" 301 "l¡neas" 302 "Vi no se carg¢ con un int‚rprete Tcl" 303 "Archivo modificado desde la £ltima escritura." 304 "Expansi¢n de shell fracasada" 304 "Expansi¢n de shell fracasada" 305 "No hay opci¢n de edici¢n %s especificada" 306 "Vi no se carg¢ con un int‚rprete Perl" 307 "No hay comando ex para ejecutar" 308 "Ingresar para ejecutar un comando, :q para salir" 309 "Usar \"cscope ayuda\" para obtener ayuda" 310 "No hay conexiones cscope corriendo" 311 "%s: tipo de b£squeda desconocido: usar uno de %s" 312 "%d: no existe esta sesi¢n cscope" 313 "determinar: la opci¢n %s no puede conectarse nunca" 314 "determinar: la opci¢n %s no puede determinarse nunca en 0" 315 "%s: a¤adido: %lu l¡neas, %lu caracteres" 316 "Evento inesperado de modificaci¢n de tama¤o" 317 "%d archivos para editar" vigor-0.016.orig/catalog/dutch0100644000076400007640000002644107103707216014744 0ustar cjw44cjw44VI_MESSAGE_CATALOG regel te langX kan regel %lu niet verwijderenX kan niet toevoegen aan regel %luX kan niet invoegen vooraan regel %luX kan regel %lu niet opslaanX kan laatste regel niet lezenX Fout: kan regel %lu niet vindenX log bestandX Er vindt geen logging plaats, kan wijzigingen niet ongedaan makenX geen wijzigingen om ongedaan te makenX Er vindt geen logging plaats, kan wijzigingen niet ongedaan makenX Er vindt geen logging plaats, herhaling niet mogelijkX geen wijzigingen om te herhalenX %s/%d: schrijven naar log misluktX Vi's standaard invoer en uitvoer moeten aan een terminal gekoppeld zijnX Merk %s: niet gezetX Merk %s: de regel is verwijderdX Merk %s: de cursor positie bestaat niet meerX Fout: X nieuw bestandX naam veranderdX gewijzigdX ongewijzigdX NIET BEVEILIGDX niet schrijfbaarX regel %lu uit %lu [%ld%%]X leeg bestandX regel %luX Het bestand %s is geen message catalogX Niet in staat om de standaard %s optie in te stellenX Gebruik: %sX set: optie %s onbekend: 'set all' laat alle opties zienX set: [no]%s optie kan geen waarde hebbenX set: %s optie moet een waarde hebbenX set: %s optie: %sX set: %s optie: %s: getal is te grootX set: %s optie: %s is een ongeldige waardeX set: %s optie moet een waarde hebbenX Te weinig kolommen op het scherm, minder dan %dX Aantal kolommen te groot, meer dan %dX Te weinig regels op het scherm, minder dan %dX Aantal regels te groot, meer dan %dX De lisp optie is niet ondersteundX messages niet uitgeschakeld: %sX messages niet geactiveerd: %sX De paragraph optie moet karakter paren bevattenX De section optie moet karakter paren bevattenX De standaard buffer is leegX Buffer %s is leegX Bestanden met newlines in de naam kunnen niet hersteld wordenX Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie misluktX Bestand wordt gecopieerd voor herstel...X Herstel mechanisme werkt niet: %sX Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie misluktX Kon bestand niet veilig stellen: %sX Bestand wordt gecopieerd voor herstel...X Informatie met betrekking tot gebruiker nummer %u niet gevondenX Kan herstel bestand niet beveiligenX herstel buffer overgelopenX herstel bestandX %s: verminkt herstel bestandX %s: verminkt herstel bestandX U heeft geen bestand genaamd %s te herstellenX U kan eerdere versies van dit bestand herstellenX U kan nog meer bestanden herstellenX kan geen email versturen: %sX Bestand leeg; niets om te doorzoekenX Einde van het bestand bereikt zonder dat het patroon gevonden isX Geen vorig zoek patroonX Patroon niet gevondenX Begin van het bestand bereikt zonder dat het patroon gevonden isX Zoek-operatie omgeslagenX Bezig met zoeken...X Geen niet-printbaar karakter gevondenX Onbekend commandoX Commando niet beschikbaar in ex modeX Aantal mag niet nul zijnX %s: ongeldige regel aanduidingX Interne fout in syntax tabel (%s: %s)X Gebruik: %sX %s: tijdelijke buffer niet vrijgegevenX Vlag offset voor regel 1X Vlag offset voorbij bestands eindeX bestand/scherm veranderd tijdens uitvoeren van @ in een blokX bestand/scherm veranderd tijdens uitvoeren van globaal/v commandoX Ex commando mislukt: rest van commando(s) genegeerdX Ex commando mislukt: gemappede toetsen genegeerdX Het tweede adres is kleiner dan het eersteX Geen merk naam opgegevenX \\ niet gevolgd door / of ?X Referentie aan een regel nummer kleiner dan 0X Het %s commando is onbekendX Adres waarde te grootX Adres waarde te kleinX Ongeldige adres combinatieX Ongeldig adres: slechts %lu regels in het bestand aanwezigX Ongeldig adres: het bestand is leegX Het %s commando staat het adres 0 niet toeX Geen afkortingen om weer te gevenX Afkortingen moeten eindigen met een "woord" letterX Afkortingen mogen geen tabulaties of spaties bevattenX Afkortingen mogen geen woord/niet-woord karakters mengen, behalve aan het eindeX "%s" is geen afkortingX Vi commando mislukt: gemappede toetsen genegeerdX Dit is het laatste bestandX Dit is het eerste bestandX Dit is het eerste bestandX lijst met bestanden is leegX Geen voorgaand commando om "!" te vervangenX Geen bestandsnaam voor %%X Geen bestandsnaam voor #X Fout: execl: %sX I/O fout: %sX Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX Kan uw home directory niet vindenX Nieuwe huidige directory: %sX Geen cut buffers aanwezigX Het %s commando kan niet gebruikt worden in een globaal of v commandoX %s/%s: niet gelezen: noch U noch root is de eigenaarX %s/%s: niet gelezen: U bent niet de eigenaarX %s/%s: niet gelezen: kan gewijzigd worden door andere gebruikersX %s: niet gelezen: noch U noch root is de eigenaar"X %s: niet gelezen: U bent niet de eigenaarX %s: niet gelezen: kan gewijzigd worden door andere gebruikersX Geen volgende regel om samen te voegenX Geen input map entriesX Geen command map entriesX Het %s karakter kan niet ge-remapped wordenX "%s" is niet gemappedX Merk naam moet een enkel karakter zijnX %s bestaat al, niet weggeschreven; gebruik ! om het te forcerenX Nieuw .exrc bestand: %s. X doel regel ligt in het blokX Het open commando vereist dat de open optie actief isX Het open commando is nog niet ondersteundX Kan dit bestand niet veilig stellenX Bestand veilig gesteldX %s resulteert in te veel bestandsnamenX Alleen echte bestanden en named pipes kunnen gelezen wordenX %s: lees beveiliging niet beschikbaarX Bezig met lezen...X %s: %lu regels, %lu karaktersX Geen achtergrond schermen aanwezigX Het script commando is alleen beschikbaar in vi modeX Geen comando om uit te voerenX shiftwidth optie op 0 gezetX Count te grootX Count te kleinX Reguliere expressie opgegeven; r vlag heeft geen betekenisX De #, l en p vlaggen kunnen niet gecombineerd worden met de c vlag in vi modeX Geen match gevondenX Geen voorafgaande tag aanwezigX Minder dan %s elementen op de tags stapel; gebruik :display t[ags]X Geen bestand genaamd %s op de tags stapel; gebruik :display t[ags]X Kies Enter om door te gaan: X %s: tag niet gevondenX %s: verminkte tag in %sX %s: Het regel nummer van deze tag is voorbij het einde van het bestandX De tags stapel is leegX %s: zoek patroon niet gevondenX %d andere bestanden te wijzigenX Buffer %s is leegX Bevestig wijziging? [n]X OnderbrokenX Geen voorafgaande buffer om uit te voerenX Geen vorige reguliere expressieX Het %s commando vereist dat er een bestand geladen isX Gebruik: %sX Het visual commando vereist dat de open optie actief isX Leeg bestandX Geen voorafgaand F, f, T of t zoek commandoX %s niet gevondenX Geen voorafgaand bestand te bewerkenX Cursor niet op een getalX Getal wordt te grootX Getal wordt te kleinX Geen overeenkomstig karakter op deze regelX Overeenkomstig karakter niet gevondenX Geen karakters te vervangenX Geen ander scherm aanwezigX Karakters achter het zoek patroon, de regel offset, en/of het z commandoX Geen voorafgaand zoek patroonX Zoekopdracht na omslag teruggekeerd op originele positieX Afkorting overschrijdt expansie limiet: karakters genegeerdX Ongeldig karakter; quote to enterX Reeds aan het begin van de invoerX Niet meer karakters te verwijderenX Verplaatsing voorbij het einde van het bestandX Verplaatsing voorbij het einde van de regelX Cursor niet verplaatstX Reeds aan het begin van het bestandX Verplaatsing voorbij het begin van het bestandX Reeds in de eerste kolomX Buffers moeten voor het commando opgegeven wordenX Reeds bij het einde van het bestandX Reeds bij het einde van de regelX %s is geen vi commandoX Gebruik: %sX Geen karakters te verwijderenX Het Q commando vereist de ex terminal interfaceX Geen commando om te herhalenX Het bestand is leegX %s mag niet gebruikt worden als een verplaatsings commandoX Al in commando modeX Cursor niet in een woordX Windows optie waarde is te groot, maximum is %uX ToevoegenX VeranderenX CommandoX InvoegenX VervangenX Verplaatsing voorbij het eind van het schermX Verplaatsing voorbij het begin van het schermX Scherm moet meer dan %d regels hebben om het te kunnen splitsenX Er zijn geen achtergrond schermenX Er is geen achtergrond scherm waarin U bestand %s aan het bewerken bentX U kan uw enige scherm niet in de achtergrond zettenX Het scherm kan slechts verkleind worden tot %d regelsX Het scherm kan niet kleinerX Het scherm kan niet groterX Dit scherm kan niet gesuspend wordenX Onderbroken: gemappede toetsen genegeerdX vi: tijdelijke buffer niet vrijgegevenX Deze terminal heeft geen %s toetsX Er kan slechts een buffer opgegeven wordenX Getal groter dan %luX OnderbrokenX Aanmaken van tijdelijk bestand is misluktX Waarschuwing: %s is geen regulier bestandX %s is al geopend, bestand is in deze sessie niet schrijfbaarX %s: verwijdering misluktX %s: sluiting misluktX %s: verwijdering misluktX %s: verwijdering misluktX Bestand niet schrijfbaar, niet weggeschreven; gebruik ! om het te forcerenX Bestand niet schrijfbaar, niet weggeschrevenX %s bestaat al, niet weggeschreven; gebruik ! om het te forcerenX %s bestaat al, niet weggeschrevenX Gebruik ! om een incompleet bestand weg te schrijvenX Bestand incompleet, niet weggeschrevenX %s: bestand op disk nieuwer dan deze versie; gebruik ! om het te forcerenX %s: bestand op disk nieuwer dan deze versieX %s: schrijf beveiliging niet beschikbaarX Bezig met schrijven...X %s: WAARSCHUWING: BESTAND INCOMPLEETX Reeds op de eerste tag van deze groepX %s: nieuw bestand: %lu regels, %lu karaktersX %s: %lu regels, %lu karaktersX %s resulteert in te veel bestandsnamenX %s: geen normaal bestandX %s: U bent niet de eigenaarX %s: kan gewijzigd worden door andere gebruikersX Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik :edit! om het te forcerenX Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX Tijdelijk bestand; exit negeert wijzigingenX Bestand niet schrijfbaar, wijzigingen niet automatisch weggeschrevenX log opnieuw gestartX Bevestig? [ynq]X Druk op een toets om door te gaan: X Druk op een toets om door te gaan [: voor meer ex commandos]: X Druk op een toets om door te gaan [q om te stoppen]: X Deze vorm van %s vereist de ex terminal interfaceX Entering ex input mode.X Commando mislukt, nog geen bestand geladen.X doorgaan?X Onverwacht character eventX Onverwacht end-of-file eventX Geen match gevonden voor dit patroonX Onverwacht interrupt eventX Onverwacht quit eventX Onverwacht repaint eventX Reeds op de laatste tag van deze groepX Het %s command vereist de ex terminal interfaceX Deze vorm van %s is niet ondersteund als de secure edit optie actief isX Onverwacht string eventX Onverwacht timeout eventX Onverwacht write eventX Shell expansies zijn niet ondersteund als de secure edit optie actief isX Het %s commando is niet ondersteund als de secure edit optie actief isX set: %s mag niet uitgezet wordenX Scherm te klein.X toegevoegdX gewijzigdX verwijderdX samengevoegdX verplaatstX verschovenX gebufferdX regelX regelsX Vi was niet geladen met een Tcl interpreterX Bestand gewijzigd sinds het de laatste keer weg is geschreven.X Shell expansie misluktX Geen %s edit optie opgegevenX Vi was niet geladen met een Perl interpreterX Geen ex commando om uit te voerenX Kies om commando uit te voeren, :q om te stoppenX Gebruik "cscope help" voor uitlegX Nog geen cscope connectie aanwezigX %s: onbekend zoek type: gebruik een van %sX %d: onbekende cscope sessieX set: de %s optie mag nooit aangezet wordenX set: de %s optie mag nooit op 0 gezet wordenX %s: toegevoegd: %lu regels, %lu karaktersX Onverwacht resize eventX %d bestanden te wijzigenX vigor-0.016.orig/catalog/english.base0100644000076400007640000002642007103707216016174 0ustar cjw44cjw44002 "Line length overflow" 003 "unable to delete line %lu" 004 "unable to append to line %lu" 005 "unable to insert at line %lu" 006 "unable to store line %lu" 007 "unable to get last line" 008 "Error: unable to retrieve line %lu" 009 "Log file" 010 "Logging not being performed, undo not possible" 011 "No changes to undo" 012 "Logging not being performed, undo not possible" 013 "Logging not being performed, roll-forward not possible" 014 "No changes to re-do" 015 "%s/%d: log put error" 016 "Vi's standard input and output must be a terminal" 017 "Mark %s: not set" 018 "Mark %s: the line was deleted" 019 "Mark %s: cursor position no longer exists" 020 "Error: " 021 "new file" 022 "name changed" 023 "modified" 024 "unmodified" 025 "UNLOCKED" 026 "readonly" 027 "line %lu of %lu [%ld%%]" 028 "empty file" 029 "line %lu" 030 "The file %s is not a message catalog" 031 "Unable to set default %s option" 032 "Usage: %s" 033 "set: no %s option: 'set all' gives all option values" 034 "set: [no]%s option doesn't take a value" 035 "set: %s option isn't a boolean" 036 "set: %s option: %s" 037 "set: %s option: %s: value overflow" 038 "set: %s option: %s is an illegal number" 039 "set: %s option isn't a boolean" 040 "Screen columns too small, less than %d" 041 "Screen columns too large, greater than %d" 042 "Screen lines too small, less than %d" 043 "Screen lines too large, greater than %d" 044 "The lisp option is not implemented" 045 "messages not turned off: %s" 046 "messages not turned on: %s" 048 "The paragraph option must be in two character groups" 049 "The section option must be in two character groups" 053 "The default buffer is empty" 054 "Buffer %s is empty" 055 "Files with newlines in the name are unrecoverable" 056 "Modifications not recoverable if the session fails" 057 "Copying file for recovery..." 058 "Preservation failed: %s" 059 "Modifications not recoverable if the session fails" 060 "File backup failed: %s" 061 "Copying file for recovery..." 062 "Information on user id %u not found" 063 "Unable to lock recovery file" 064 "Recovery file buffer overrun" 065 "Recovery file" 066 "%s: malformed recovery file" 067 "%s: malformed recovery file" 068 "No files named %s, readable by you, to recover" 069 "There are older versions of this file for you to recover" 070 "There are other files for you to recover" 071 "not sending email: %s" 072 "File empty; nothing to search" 073 "Reached end-of-file without finding the pattern" 074 "No previous search pattern" 075 "Pattern not found" 076 "Reached top-of-file without finding the pattern" 077 "Search wrapped" 078 "Searching..." 079 "No non-printable character found" 080 "Unknown command name" 082 "%s: command not available in ex mode" 083 "Count may not be zero" 084 "%s: bad line specification" 085 "Internal syntax table error (%s: %s)" 086 "Usage: %s" 087 "%s: temporary buffer not released" 088 "Flag offset to before line 1" 089 "Flag offset past end-of-file" 090 "@ with range running when the file/screen changed" 091 "Global/v command running when the file/screen changed" 092 "Ex command failed: pending commands discarded" 093 "Ex command failed: mapped keys discarded" 094 "The second address is smaller than the first" 095 "No mark name supplied" 096 "\\ not followed by / or ?" 097 "Reference to a line number less than 0" 098 "The %s command is unknown" 099 "Address value overflow" 100 "Address value underflow" 101 "Illegal address combination" 102 "Illegal address: only %lu lines in the file" 103 "Illegal address: the file is empty" 104 "The %s command doesn't permit an address of 0" 105 "No abbreviations to display" 106 "Abbreviations must end with a "word" character" 107 "Abbreviations may not contain tabs or spaces" 108 "Abbreviations may not mix word/non-word characters, except at the end" 109 ""%s" is not an abbreviation" 110 "Vi command failed: mapped keys discarded" 111 "No more files to edit" 112 "No previous files to edit" 113 "No previous files to rewind" 114 "No file list to display" 115 "No previous command to replace "!"" 116 "No filename to substitute for %%" 117 "No filename to substitute for #" 118 "Error: execl: %s" 119 "I/O error: %s" 120 "File modified since last complete write; write or use ! to override" 121 "Unable to find home directory location" 122 "New current directory: %s" 123 "No cut buffers to display" 124 "The %s command can't be used as part of a global or v command" 125 "%s/%s: not sourced: not owned by you or root" 126 "%s/%s: not sourced: not owned by you" 127 "%s/%s: not sourced: writeable by a user other than the owner" 128 "%s: not sourced: not owned by you or root" 129 "%s: not sourced: not owned by you" 130 "%s: not sourced: writeable by a user other than the owner" 131 "No following lines to join" 132 "No input map entries" 133 "No command map entries" 134 "The %s character may not be remapped" 135 ""%s" isn't currently mapped" 136 "Mark names must be a single character" 137 "%s exists, not written; use ! to override" 138 "New exrc file: %s" 139 "Destination line is inside move range" 140 "The open command requires that the open option be set" 141 "The open command is not yet implemented" 142 "Preservation of this file not possible" 143 "File preserved" 144 "%s: expanded into too many file names" 145 "Only regular files and named pipes may be read" 146 "%s: read lock was unavailable" 147 "Reading..." 148 "%s: %lu lines, %lu characters" 149 "No background screens to display" 150 "The script command is only available in vi mode" 151 "No command to execute" 152 "shiftwidth option set to 0" 153 "Count overflow" 154 "Count underflow" 155 "Regular expression specified; r flag meaningless" 156 "The #, l and p flags may not be combined with the c flag in vi mode" 157 "No match found" 158 "No previous tag entered" 159 "Less than %s entries on the tags stack; use :display t[ags]" 160 "No file %s on the tags stack to return to; use :display t[ags]" 161 "Press Enter to continue: " 162 "%s: tag not found" 163 "%s: corrupted tag in %s" 164 "%s: the tag's line number is past the end of the file" 165 "The tags stack is empty" 166 "%s: search pattern not found" 167 "%d more files to edit" 168 "Buffer %s is empty" 169 "Confirm change? [n]" 170 "Interrupted" 171 "No previous buffer to execute" 172 "No previous regular expression" 173 "The %s command requires that a file have already been read in" 174 "Usage: %s" 175 "The visual command requires that the open option be set" 177 "Empty file" 178 "No previous F, f, T or t search" 179 "%s not found" 180 "No previous file to edit" 181 "Cursor not in a number" 182 "Resulting number too large" 183 "Resulting number too small" 184 "No match character on this line" 185 "Matching character not found" 186 "No characters to replace" 187 "No other screen to switch to" 188 "Characters after search string, line offset and/or z command" 189 "No previous search pattern" 190 "Search wrapped to original position" 191 "Abbreviation exceeded expansion limit: characters discarded" 192 "Illegal character; quote to enter" 193 "Already at the beginning of the insert" 194 "No more characters to erase" 195 "Movement past the end-of-file" 196 "Movement past the end-of-line" 197 "No cursor movement made" 198 "Already at the beginning of the file" 199 "Movement past the beginning of the file" 200 "Already in the first column" 201 "Buffers should be specified before the command" 202 "Already at end-of-file" 203 "Already at end-of-line" 204 "%s isn't a vi command" 205 "Usage: %s" 206 "No characters to delete" 207 "The Q command requires the ex terminal interface" 208 "No command to repeat" 209 "The file is empty" 209 "The file is empty" 210 "%s may not be used as a motion command" 211 "Already in command mode" 212 "Cursor not in a word" 214 "Windows option value is too large, max is %u" 215 "Append" 216 "Change" 217 "Command" 218 "Insert" 219 "Replace" 220 "Movement past the end-of-screen" 221 "Movement past the beginning-of-screen" 222 "Screen must be larger than %d lines to split" 223 "There are no background screens" 224 "There's no background screen editing a file named %s" 225 "You may not background your only displayed screen" 226 "The screen can only shrink to %d rows" 227 "The screen cannot shrink" 228 "The screen cannot grow" 230 "This screen may not be suspended" 231 "Interrupted: mapped keys discarded" 232 "vi: temporary buffer not released" 233 "This terminal has no %s key" 234 "Only one buffer may be specified" 235 "Number larger than %lu" 236 "Interrupted" 237 "Unable to create temporary file" 238 "Warning: %s is not a regular file" 239 "%s already locked, session is read-only" 240 "%s: remove" 241 "%s: close" 242 "%s: remove" 243 "%s: remove" 244 "Read-only file, not written; use ! to override" 245 "Read-only file, not written" 246 "%s exists, not written; use ! to override" 247 "%s exists, not written" 248 "Partial file, not written; use ! to override" 249 "Partial file, not written" 250 "%s: file modified more recently than this copy; use ! to override" 251 "%s: file modified more recently than this copy" 252 "%s: write lock was unavailable" 253 "Writing..." 254 "%s: WARNING: FILE TRUNCATED" 255 "Already at the first tag of this group" 256 "%s: new file: %lu lines, %lu characters" 257 "%s: %lu lines, %lu characters" 258 "%s expanded into too many file names" 259 "%s: not a regular file" 260 "%s: not owned by you" 261 "%s: accessible by a user other than the owner" 262 "File modified since last complete write; write or use ! to override" 263 "File modified since last complete write; write or use :edit! to override" 264 "File modified since last complete write; write or use ! to override" 265 "File is a temporary; exit will discard modifications" 266 "File readonly, modifications not auto-written" 267 "Log restarted" 268 "confirm? [ynq]" 269 "Press any key to continue: " 270 "Press any key to continue [: to enter more ex commands]: " 271 "Press any key to continue [q to quit]: " 272 "That form of %s requires the ex terminal interface" 273 "Entering ex input mode." 274 "Command failed, no file read in yet." 275 " cont?" 276 "Unexpected character event" 277 "Unexpected end-of-file event" 278 "No matches for query" 279 "Unexpected interrupt event" 280 "Unexpected quit event" 281 "Unexpected repaint event" 282 "Already at the last tag of this group" 283 "The %s command requires the ex terminal interface" 284 "That form of %s is not supported when the secure edit option is set" 285 "Unexpected string event" 286 "Unexpected timeout event" 287 "Unexpected write event" 289 "Shell expansions not supported when the secure edit option is set" 290 "The %s command is not supported when the secure edit option is set" 291 "set: the %s option may not be turned off" 292 "Display too small." 293 "added" 294 "changed" 295 "deleted" 296 "joined" 297 "moved" 298 "shifted" 299 "yanked" 300 "line" 301 "lines" 302 "Vi was not loaded with a Tcl interpreter" 303 "File modified since last write." 304 "Shell expansion failed" 304 "Shell expansion failed" 305 "No %s edit option specified" 306 "Vi was not loaded with a Perl interpreter" 307 "No ex command to execute" 308 "Enter to execute a command, :q to exit" 309 "Use "cscope help" for help" 310 "No cscope connections running" 311 "%s: unknown search type: use one of %s" 312 "%d: no such cscope session" 313 "set: the %s option may never be turned on" 314 "set: the %s option may never be set to 0" 315 "%s: appended: %lu lines, %lu characters" 316 "Unexpected resize event" 317 "%d files to edit" vigor-0.016.orig/catalog/swedish.base0100644000076400007640000002745007103707216016215 0ustar cjw44cjw44002 "För långa rader" 003 "kan inte ta bort rad %lu" 004 "kan inte lägga till på rad %lu" 005 "kan inte sätta in på rad %lu" 006 "kan inte lagra rad %lu" 007 "kan inte hämta sista raden" 008 "Fel: kan inte hämta rad %lu" 009 "Loggningsfil" 010 "Loggning utförs inte, ångra är inte möjligt" 011 "Inga ändringar att ångra" 012 "Loggning utförs inte, ångra är inte möjligt" 013 "Loggning utförs inte, ångra ångra är inte möjligt" 014 "Inga ändringar att återgöra" 015 "%s/%d: fel vid loggning" 016 "Vi:s standard in och ut måste gå till en terminal" 017 "Markering %s: inte satt" 018 "Markering %s: raden har tagits bort" 019 "Markering %s: markörpositionen finns inte längre" 020 "Fel: " 021 "ny fil" 022 "namnet ändrades" 023 "ändrad" 024 "oförändrad" 025 "OLÅST" 026 "inte skrivbar" 027 "rad %lu av %lu [%ld%%]" 028 "tom fil" 029 "rad %lu" 030 "Filen %s är ingen meddelandekatalog" 031 "Kan inte sätta standardvärde för %s flaggan" 032 "Användning: %s" 033 "set: %s är en okänd flagga: "set all" visar alla flaggor" 034 "set: [no]%s flaggan kan inte ges ett värde" 035 "set: %s flaggan är inte boleansk" 036 "set: %s flaggan: %s" 037 "set: %s flaggan: %s: för stort värde" 038 "set: %s flaggan: %s är ett otillåtet tal" 039 "set: %s flaggan är inte boleansk" 040 "Fönsterkolumnerna är för få, mindre än %d" 041 "Fönsterkolumnerna är för många, fler än %d" 042 "Fönsterraderna är för få, mindre än %d" 043 "Fönsterraderna är för många, fler än %d" 044 "Lisp flaggan är inte implementerad" 045 "meddelanden är inte avslagna: %s" 046 "meddelanden är inte påslagna: %s" 048 "Paragraph flaggan måste ges i teckengrupper om två" 049 "Section flaggan måste ges i teckengrupper om två" 053 "Standardbufferten är tom" 054 "Buffer %s är tom" 055 "Filer med radmatning i namnet kan inte återskapas" 056 "Ändringar kan inte återskapas om programmet kraschar" 057 "Kopierar filen för återskapning..." 058 "Säkerhetskopiering misslyckades: %s" 059 "Ändringar kan inte återskapas om programmet kraschar" 060 "Misslyckades att säkerhetskopiera filen: %s" 061 "Kopierar filen för återskapning..." 062 "Kan inte hitta information om användaridentitet %u" 063 "Kan inte låsa återskapningsfilen" 064 "Återskapningsfilens buffer överskriven" 065 "Återskapningsfil" 066 "%s: Återskapningsfilen är korrupt" 067 "%s: Återskapningsfilen är korrupt" 068 "Det finns ingen fil %s, läsbar av dig, att återskapa" 069 "Det finns äldre versioner av denna fil som du kan återskapa" 070 "Det finns andra filer du kan återskapa" 071 "skickar inte email: %s" 072 "Filen är tom; inget att söka i" 073 "Kom till slutet på filen utan att hitta söksträngen" 074 "Ingen tidigare söksträng" 075 "Hittar inte söksträngen" 076 "Kom till början av filen utan att hitta söksträngen" 077 "Sökningen slog runt" 078 "Söker..." 079 "Inga icke skrivbara tecken funna" 080 "Okänt kommandonamn" 082 "%s: kommandot är inte tillgängligt i "ex" läge" 083 "Talet får inte vara noll" 084 "%s: Ogiltig radspecifikation" 085 "Fel i intern syntaxtabell (%s: %s)" 086 "Användning: %s" 087 "%s: temporärbuffert inte frisläppt" 088 "Offset är före rad 1" 089 "Offset är efter slutet på filen" 090 "@ med intervall exekverades när filen/fönstret ändrades" 091 "Global/v kommando exekverades när filen/fönstret ändrades" 092 "Ex kommando misslyckades: efterföljande kommandon ignorerade" 093 "Ex kommando misslyckades: omdefinierade tangenter ignorerade" 094 "Den andra adressen är mindre än den första" 095 "Inget namn på markering givet" 096 "\\ följs inte av / eller ?" 097 "Referens till ett radnummer mindre än 0" 098 "%s kommandot är inte känt" 099 "Värdet på adressen är för stort" 100 "Värdet på adressen är för litet" 101 "Otillåten adresskombination" 102 "Otillåten adress: bara %lu rader finns i filen" 103 "Otillåten adress: filen är tom" 104 "%s kommandot tillåter inte en adress som är 0" 105 "Inga förkortningar att visa" 106 "Förkortningar måste sluta med ett "ord" tecken" 107 "Förkortningar kan inte innehålla mellanslag eller tab" 108 "Förkortningar kan inte blanda "ord"/"icke ord" tecken, utom i slutet" 109 ""%s" är ingen förkortning" 110 "Vi kommando misslyckades: omdefinierade tangenter ignorerade" 111 "Inga fler filer att editera" 112 "Inga tidigare filer att editera" 113 "Inga tidigare filer att spela tillbaka" 114 "Ingen fillista att visa" 115 "Inget tidigare kommando att ersätta "!" med" 116 "Inget filnamn att ersätta %% med" 117 "Inget filnamn att ersätta # med" 118 "Fel: execl: %s" 119 "I/O fel: %s" 120 "Filen ändrad efter sista skrivning; spara eller använd !" 121 "Kan inte hitta hemkatalog" 122 "Ny nuvarande katalog: %s" 123 "Inga "cut buffers" att visa" 124 "%s kommandot kan inte används som del i ett "global" eller v kommando" 125 "%s/%s: inte läst: varken du eller root är ägare" 126 "%s/%s: inte läst: du är inte ägare" 127 "%s/%s: inte läst: skrivbar av annan än ägaren" 128 "%s: inte läst: varken du eller root är ägare" 129 "%s: inte läst: du är inte ägare" 130 "%s: inte läst: skrivbar av annan än ägaren" 131 "Ingen nästa rad att sätta ihop med" 132 "Det finns inget i inmatningsmappningen" 133 "Det finns inget i kommandomappningen" 134 "%s tecknet kan inte mappas om" 135 ""%s" är inte ommappat just nu" 136 "Namn på markeringar måste vara ett tecken långa" 137 "%s finns, inget sparat; använd ! för att spara" 138 "Ny exrc fil: %s" 139 "Målraden ligger inne i området som ska flyttas" 140 "Open kommandot kräver att open flaggan är satt" 141 "Open kommandot är inte implementerat ännu" 142 "Säkerhetskopiering av filen är inte möjligt" 143 "Filen säkerhetskopierad" 144 "%s expanderade till för många filnamn" 145 "Endast vanliga filer och namngivna rör kan läsas" 146 "%s: läslåset är otillgängligt" 147 "Läser..." 148 "%s: %lu rader, %lu tecken" 149 "Inga bakgrundsfönster att visa" 150 "Script kommandot finns bara i "vi" läge" 151 "Inget kommando att exekvera" 152 "shiftwidth flaggan satt till 0" 153 "Talet har för stort värde" 154 "Talet har för litet värde" 155 "Reguljärt uttryck är givet; r flaggan är meningslös" 156 "#, l och p flaggorna kan inte kombineras med c flaggan i "vi" läge" 157 "Ingen matchande text funnen" 158 "Inget tidigare märke har givits" 159 "Det är färre än %s märken i stacken; använd :display t[ags]" 160 "Det finns ingen fil %s i märkesstacken; använd :display t[ags]" 161 "Tryck Enter för att fortsätta: " 162 "%s: märke inte funnet" 163 "%s: korrupt märke i %s" 164 "%s: märkets radnummer är bortom filslutet" 165 "Märkesstacken är tom" 166 "%s: söksträngen inte funnen" 167 "%d filer till att editera" 168 "Buffert %s är tom" 169 "Bekräfta ändring? [n]" 170 "Avbruten" 171 "Ingen tidigare buffert att exekvera" 172 "Inget tidigare reguljärt uttryck" 173 "%s kommandot kräver att en fil redan lästs in" 174 "Användning: %s" 175 "Visual kommandot kräver att open flaggan är satt" 177 "Tom fil" 178 "Ingen tidigare F, f, T eller t sökning" 179 "%s inte funnen" 180 "Ingen tidigare fil att editera" 181 "Markören är inte i ett tal" 182 "Det resulterande talet är för stort" 183 "Det resulterande talet är för litet" 184 "Inget matchande tecken på denna rad" 185 "Matchande tecken inte funnet" 186 "Det finns inga tecken att ersätta" 187 "Det finns inget fönster att byta till" 188 "Tecken efter söksträng, radoffset och/eller z kommandot" 189 "Ingen tidigare söksträng" 190 "Sökningen slog runt till ursprungliga positionen" 191 "Förkortning överskred expanderingsgränsen: tecken har tagits bort" 192 "Ogiltigt tecken; använd "quote" för att sätta in" 193 "Redan i början på insättningen" 194 "Inga fler tecken att ta bort" 195 "Försök att gå bortom slutet på filen" 196 "Försök att gå bortom slutet på raden" 197 "Ingen förflyttning gjord" 198 "Redan i början på filen" 199 "Försök att gå före början på filen" 200 "Redan i första kolumnen" 201 "Buffertar måste anges före kommandot" 202 "Redan i slutet av filen" 203 "Redan på slutet av raden" 204 "%s är inte ett "vi" kommando" 205 "Användning: %s" 206 "Inga tecken att ta bort" 207 "Q kommandot kräver "ex" i terminalläge" 208 "Inget kommando att repetera" 209 "Filen är tom" 210 "%s kan inte användas som ett förflyttningskommando" 211 "Redan i kommando läge" 212 "Markören är inte i ett ord" 214 "Windows flaggans värde är för stor, största värde är %u" 215 "Lägg till" 216 "Ändra" 217 "Kommando" 218 "Sätt in" 219 "Ersätt" 220 "Förflyttning bortom fönsterslut" 221 "Förflyttning till före fönstrets början" 222 "Fönstret måste vara större än %d rader för delning" 223 "Det finns inga fönster i bakgrunden" 224 "Det finns inget fönster i bakgrunden som editerar filen %s" 225 "Du får inte sätta ditt enda synliga fönster i bakgrunden" 226 "Fönstret kan bara krympa till %d rader" 227 "Fönstret kan inte krympa" 228 "Fönstret kan inte växa" 230 "Detta fönster kan inte pausas" 231 "Avbrutet: omdefinierade tangenter ignorerade" 232 "vi: temporärbuffertar inte frisläppta" 233 "Denna terminal har ingen %s tangent" 234 "Endast en buffert kan anges" 235 "Talet är större än %lu" 236 "Avbrutet" 237 "Kan inte skapa temporär fil" 238 "Warning: %s är inte en normal fil" 239 "%s är redan låst, detta blir en icke skrivbar session" 240 "%s: ta bort" 241 "%s: stäng" 242 "%s: ta bort" 243 "%s: ta bort" 244 "Ej skrivbar fil, filen inte sparad; använd ! för att skriva över" 245 "Ej skrivbar fil, filen inte sparad" 246 "%s finns, ej sparad; använd ! för att utföra operationen" 247 "%s finns, filen inte sparad" 248 "Ofullständig fil, filen inte sparad, använd ! för att skriva över" 249 "Ofullständig fil, filen inte sparad" 250 "%s: filen ändrad efter denna kopia togs; använd ! för att utföra operationen" 251 "%s: filen ändrad efter denna kopia togs" 252 "%s: skrivlåset är otillgängligt" 253 "Skriver..." 254 "%s: VARNING: FILEN TRUNKERAD" 255 "Redan vid första märket i denna grupp" 256 "%s: ny fil: %lu rader, %lu tecken" 257 "%s: %lu rader, %lu tecken" 258 "%s expanderade till för många filnamn" 259 "%s är inte en normal fil" 260 "%s ägs inte av dig" 261 "%s är åtkomstbar av andra än ägaren" 262 "Filen har ändrats efter den sparats; spara eller använd !" 263 "Filen har ändrats efter den sparats; spara eller använd :edit!" 264 "Filen har ändrats efter den sparats; spara eller använd !" 265 "Filen är temporär; exit kastar bort ändringarna" 266 "Ej skrivbar fil, ändringar har inte automatsparats" 267 "Loggningen startar om" 268 "bekräfta? [ynq]" 269 "Tryck på en tangent för att fortsätta: " 270 "Tryck på en tangent för att fortsätta [: för att ge fler kommandon]: " 271 "Tryck på en tangent för att fortsätta [q för att avsluta]: " 272 "Den formen av %s kräver "ex" i terminalläge" 273 "Går till "ex" inmatningsläge." 274 "Kommandot misslyckades, ingen fil inläst ännu." 275 " forts?" 276 "Oväntad teckenhändelse" 277 "Oväntad filslutshändelse" 278 "Sökningen hittade ingenting" 279 "Oväntad avbrottshändelse" 280 "Oväntad avslutningshändelse" 281 "Oväntad omritningshändelse" 282 "Redan vid sista märket i denna grupp" 283 "%s kommandot kräver "ex" i terminalläge" 284 "Den formen av %s är inte tillgänglig när secure edit flaggan är satt" 285 "Oväntad stränghändelse" 286 "Oväntad tidshändelse" 287 "Oväntad skrivhändelse" 289 "Skalexpansion är inte tillgänglig när secure edit flaggan är satt" 290 "%s kommandot är inte tillgänglig när secure edit flaggan är satt" 291 "set: %s kan inte slås av" 292 "Fönstret för litet." 293 "tillagda" 294 "ändrade" 295 "borttagna" 296 "ihopsatta" 297 "flyttade" 298 "flyttade" 299 "inklistrade" 300 "rad" 301 "rader" 302 "Vi har inte länkats med en Tcl tolk" 303 "Filen har ändrats efter den sparats." 304 "Skalexpansion misslyckades" 305 "Ingen %s edit flagga given" 306 "Vi har inte länkats med en Perl tolk" 307 "Inga "ex" kommandon att exekvera" 308 "Tryck för att exekvera kommando, :q för att avsluta" 309 "Gör "cscope help" för hjälp" 310 "Inga cscope kopplingar körs" 311 "%s: okänd söktyp: använd en av %s" 312 "%d: ingen sådan cscope session" 313 "set: %s flaggan får aldrig slås på" 314 "set: %s flaggan får aldrig sättas till 0" 315 "%s: tillagt: %lu rader, %lu tecken" 316 "Oväntad storleksändring" 317 "%d filer att editera" vigor-0.016.orig/catalog/english0100644000076400007640000002337007103707216015264 0ustar cjw44cjw44VI_MESSAGE_CATALOG Line length overflowX unable to delete line %luX unable to append to line %luX unable to insert at line %luX unable to store line %luX unable to get last lineX Error: unable to retrieve line %luX Log fileX Logging not being performed, undo not possibleX No changes to undoX Logging not being performed, undo not possibleX Logging not being performed, roll-forward not possibleX No changes to re-doX %s/%d: log put errorX Vi's standard input and output must be a terminalX Mark %s: not setX Mark %s: the line was deletedX Mark %s: cursor position no longer existsX Error: X new fileX name changedX modifiedX unmodifiedX UNLOCKEDX readonlyX line %lu of %lu [%ld%%]X empty fileX line %luX The file %s is not a message catalogX Unable to set default %s optionX Usage: %sX set: no %s option: 'set all' gives all option valuesX set: [no]%s option doesn't take a valueX set: %s option isn't a booleanX set: %s option: %sX set: %s option: %s: value overflowX set: %s option: %s is an illegal numberX set: %s option isn't a booleanX Screen columns too small, less than %dX Screen columns too large, greater than %dX Screen lines too small, less than %dX Screen lines too large, greater than %dX The lisp option is not implementedX messages not turned off: %sX messages not turned on: %sX The paragraph option must be in two character groupsX The section option must be in two character groupsX The default buffer is emptyX Buffer %s is emptyX Files with newlines in the name are unrecoverableX Modifications not recoverable if the session failsX Copying file for recovery...X Preservation failed: %sX Modifications not recoverable if the session failsX File backup failed: %sX Copying file for recovery...X Information on user id %u not foundX Unable to lock recovery fileX Recovery file buffer overrunX Recovery fileX %s: malformed recovery fileX %s: malformed recovery fileX No files named %s, readable by you, to recoverX There are older versions of this file for you to recoverX There are other files for you to recoverX not sending email: %sX File empty; nothing to searchX Reached end-of-file without finding the patternX No previous search patternX Pattern not foundX Reached top-of-file without finding the patternX Search wrappedX Searching...X No non-printable character foundX Unknown command nameX %s: command not available in ex modeX Count may not be zeroX %s: bad line specificationX Internal syntax table error (%s: %s)X Usage: %sX %s: temporary buffer not releasedX Flag offset to before line 1X Flag offset past end-of-fileX @ with range running when the file/screen changedX Global/v command running when the file/screen changedX Ex command failed: pending commands discardedX Ex command failed: mapped keys discardedX The second address is smaller than the firstX No mark name suppliedX \\ not followed by / or ?X Reference to a line number less than 0X The %s command is unknownX Address value overflowX Address value underflowX Illegal address combinationX Illegal address: only %lu lines in the fileX Illegal address: the file is emptyX The %s command doesn't permit an address of 0X No abbreviations to displayX Abbreviations must end with a "word" characterX Abbreviations may not contain tabs or spacesX Abbreviations may not mix word/non-word characters, except at the endX "%s" is not an abbreviationX Vi command failed: mapped keys discardedX No more files to editX No previous files to editX No previous files to rewindX No file list to displayX No previous command to replace "!"X No filename to substitute for %%X No filename to substitute for #X Error: execl: %sX I/O error: %sX File modified since last complete write; write or use ! to overrideX Unable to find home directory locationX New current directory: %sX No cut buffers to displayX The %s command can't be used as part of a global or v commandX %s/%s: not sourced: not owned by you or rootX %s/%s: not sourced: not owned by youX %s/%s: not sourced: writeable by a user other than the ownerX %s: not sourced: not owned by you or rootX %s: not sourced: not owned by youX %s: not sourced: writeable by a user other than the ownerX No following lines to joinX No input map entriesX No command map entriesX The %s character may not be remappedX "%s" isn't currently mappedX Mark names must be a single characterX %s exists, not written; use ! to overrideX New exrc file: %sX Destination line is inside move rangeX The open command requires that the open option be setX The open command is not yet implementedX Preservation of this file not possibleX File preservedX %s: expanded into too many file namesX Only regular files and named pipes may be readX %s: read lock was unavailableX Reading...X %s: %lu lines, %lu charactersX No background screens to displayX The script command is only available in vi modeX No command to executeX shiftwidth option set to 0X Count overflowX Count underflowX Regular expression specified; r flag meaninglessX The #, l and p flags may not be combined with the c flag in vi modeX No match foundX No previous tag enteredX Less than %s entries on the tags stack; use :display t[ags]X No file %s on the tags stack to return to; use :display t[ags]X Press Enter to continue: X %s: tag not foundX %s: corrupted tag in %sX %s: the tag's line number is past the end of the fileX The tags stack is emptyX %s: search pattern not foundX %d more files to editX Buffer %s is emptyX Confirm change? [n]X InterruptedX No previous buffer to executeX No previous regular expressionX The %s command requires that a file have already been read inX Usage: %sX The visual command requires that the open option be setX Empty fileX No previous F, f, T or t searchX %s not foundX No previous file to editX Cursor not in a numberX Resulting number too largeX Resulting number too smallX No match character on this lineX Matching character not foundX No characters to replaceX No other screen to switch toX Characters after search string, line offset and/or z commandX No previous search patternX Search wrapped to original positionX Abbreviation exceeded expansion limit: characters discardedX Illegal character; quote to enterX Already at the beginning of the insertX No more characters to eraseX Movement past the end-of-fileX Movement past the end-of-lineX No cursor movement madeX Already at the beginning of the fileX Movement past the beginning of the fileX Already in the first columnX Buffers should be specified before the commandX Already at end-of-fileX Already at end-of-lineX %s isn't a vi commandX Usage: %sX No characters to deleteX The Q command requires the ex terminal interfaceX No command to repeatX The file is emptyX %s may not be used as a motion commandX Already in command modeX Cursor not in a wordX Windows option value is too large, max is %uX AppendX ChangeX CommandX InsertX ReplaceX Movement past the end-of-screenX Movement past the beginning-of-screenX Screen must be larger than %d lines to splitX There are no background screensX There's no background screen editing a file named %sX You may not background your only displayed screenX The screen can only shrink to %d rowsX The screen cannot shrinkX The screen cannot growX This screen may not be suspendedX Interrupted: mapped keys discardedX vi: temporary buffer not releasedX This terminal has no %s keyX Only one buffer may be specifiedX Number larger than %luX InterruptedX Unable to create temporary fileX Warning: %s is not a regular fileX %s already locked, session is read-onlyX %s: removeX %s: closeX %s: removeX %s: removeX Read-only file, not written; use ! to overrideX Read-only file, not writtenX %s exists, not written; use ! to overrideX %s exists, not writtenX Partial file, not written; use ! to overrideX Partial file, not writtenX %s: file modified more recently than this copy; use ! to overrideX %s: file modified more recently than this copyX %s: write lock was unavailableX Writing...X %s: WARNING: FILE TRUNCATEDX Already at the first tag of this groupX %s: new file: %lu lines, %lu charactersX %s: %lu lines, %lu charactersX %s expanded into too many file namesX %s: not a regular fileX %s: not owned by youX %s: accessible by a user other than the ownerX File modified since last complete write; write or use ! to overrideX File modified since last complete write; write or use :edit! to overrideX File modified since last complete write; write or use ! to overrideX File is a temporary; exit will discard modificationsX File readonly, modifications not auto-writtenX Log restartedX confirm? [ynq]X Press any key to continue: X Press any key to continue [: to enter more ex commands]: X Press any key to continue [q to quit]: X That form of %s requires the ex terminal interfaceX Entering ex input mode.X Command failed, no file read in yet.X cont?X Unexpected character eventX Unexpected end-of-file eventX No matches for queryX Unexpected interrupt eventX Unexpected quit eventX Unexpected repaint eventX Already at the last tag of this groupX The %s command requires the ex terminal interfaceX That form of %s is not supported when the secure edit option is setX Unexpected string eventX Unexpected timeout eventX Unexpected write eventX Shell expansions not supported when the secure edit option is setX The %s command is not supported when the secure edit option is setX set: the %s option may not be turned offX Display too small.X addedX changedX deletedX joinedX movedX shiftedX yankedX lineX linesX Vi was not loaded with a Tcl interpreterX File modified since last write.X Shell expansion failedX No %s edit option specifiedX Vi was not loaded with a Perl interpreterX No ex command to executeX Enter to execute a command, :q to exitX Use "cscope help" for helpX No cscope connections runningX %s: unknown search type: use one of %sX %d: no such cscope sessionX set: the %s option may never be turned onX set: the %s option may never be set to 0X %s: appended: %lu lines, %lu charactersX Unexpected resize eventX %d files to editX vigor-0.016.orig/catalog/french0100644000076400007640000003114207103707216015074 0ustar cjw44cjw44VI_MESSAGE_CATALOG D‚passement de longueur de ligneX impossible de supprimer la ligne %luX impossible d'ajouter … la ligne %luX impossible d'ins‚rer devant la ligne %luX impossible de stocker la ligne %luX impossible d'obtenir la derniŠre ligneX Erreur : impossible de r‚cup‚rer la ligne %luX Fichier journalX Aucune connexion n'‚tant effectu‚e, impossible d'annulerX Aucune action … annulerX Aucune connexion n'‚tant effectu‚e, impossible d'annulerX Aucune connexion n'‚tant effectu‚e, reprise actualis‚e impossibleX Aucune action … refaireX %s/%d : Erreur d'‚criture de journalX L'entr‚e et la sortie Vi standards doivent ˆtre un terminalX Marque %s : non d‚finieX Marque %s : la ligne a ‚t‚ supprim‚eX Marque %s : la position du curseur n'existe plusX Erreur : X nouveau fichierX le nom a chang‚X modifi‚X non modifi‚X DEVERROUILLEX lecture seuleX ligne %lu de %lu [%ld%%]X fichier videX ligne %luX Ce fichier %s n'est pas un catalogue de messagesX Impossible de configurer option %s par d‚fautX Utilisation : %sX D‚finition : pas d'option %s : 'tout d‚finir' donne toutes les valeurs optionnellesX D‚finition : option [no]%s ne prend pas de valeurX D‚finition : l'option %s n'est pas bool‚enneX D‚finition : option %s : %sX D‚finition : option %s : %s : D‚passement de valeurX D‚finition : option %s : %s n'est pas un nombre valideX D‚finition : l'option %s n'est pas bool‚enneX Les colonnes de l'‚cran sont trop petites, inf‚rieures … %dX Les colonnes de l'‚cran sont trop grandes, sup‚rieures … %dX Les lignes de l'‚cran sont trop courtes, inf‚rieures … %dX Les lignes de l'‚cran sont trop longues, sup‚rieures … %dX L'option lisp n'est pas impl‚ment‚eX Les messages ne sont pas d‚sactiv‚s : %sX Les messages ne sont pas activ‚s : %sX L'option de paragraphe doit ˆtre en groupe de deux caractŠresX L'option de section doit ˆtre en groupe de deux caractŠresX Le tampon par d‚faut est videX Le tampon %s est videX Les fichiers dont le nom contient des caractŠres de saut de ligne sont irr‚cup‚rablesX Impossible de r‚cup‚rer les modifications si la session ‚choueX Copie en cours du fichier pour r‚cup‚ration...X La pr‚servation a ‚chou‚ : %sX Impossible de r‚cup‚rer les modifications si la session ‚choueX La sauvegarde du fichier a ‚chou‚ : %sX Copie en cours du fichier pour r‚cup‚ration...X Les renseignements sur l'identit‚ %u de l'utilisateur sont introuvablesX Impossible de verrouiller le fichier de r‚cup‚rationX D‚bordement de tampon du fichier de r‚cup‚rationX Fichier de r‚cup‚rationX %s : Fichier de r‚cup‚ration malform‚X %s : Fichier de r‚cup‚ration malform‚X Aucun fichier nomm‚ %s … r‚cup‚rer, que vous puissiez lireX Il existe des versions r‚cup‚rables ant‚rieures … ce fichierX Vous avez d'autres fichiers … r‚cup‚rerX pas d'envoi d'email : %sX Fichier vide, rien … rechercherX Fin de fichier atteinte sans trouver le motifX Pas de motif de recherche pr‚c‚dentX Motif introuvableX D‚but du fichier atteint sans trouver le motifX La recherche est revenue … son point de d‚partX Recherche en cours...X CaractŠre non-imprimable introuvableX Nom de commande inconnuX %s : Commande non disponible en ex modeX Le compte ne peut ˆtre z‚roX %s : mauvaise sp‚cification de ligneX Erreur de tableau de syntaxe interne (%s: %s)X Utilisation : %sX %s : tampon temporaire non lib‚r‚X D‚calage de drapeau hors de la ligne 1X D‚calage de drapeau hors de la fin du fichierX @ avec plage, en cours d'ex‚cution quand le fichier/l'‚cran a chang‚X Commande Global/v en cours d'ex‚cution quand le fichier/l'‚cran a chang‚X La commande ex a ‚chou‚ : commandes en attente abandonn‚esX La commande ex a ‚chou‚ : les touches affect‚es sont abandonn‚esX La deuxiŠme adresse est plus petite que la premiŠreX Aucun nom de marque fourniX \\ pas suivi par / ou ?X R‚f‚rence … un num‚ro de ligne inf‚rieure … 0X La commande %s est inconnueX D‚passement de la valeur adresseX D‚passement n‚gatif de la valeur adresseX Combinaison d'adresse non valideX Adresse non valide : il n'y a que des lignes %lu dans le fichierX Adresse non valide : le fichier est videX La commande %s ne permet pas une adresse de 0X Pas d'abr‚viations … afficherX Les abr‚viations doivent finir par un caractŠre"motX Les abr‚viations ne peuvent pas contenir de tabulations ni d'espacesX Les abr‚viations ne peuvent pas contenir un m‚lange de caractŠres mot/non-mot, sauf … la finX "%s" n'est pas une abr‚viationX La commande Vi a ‚chou‚ : Les touches affect‚es ont ‚t‚ abandonn‚esX Plus de fichiers … ‚diterX Pas de fichiers pr‚c‚dents … ‚diterX Pas de fichiers pr‚c‚dents … rembobinerX Pas de liste de fichiers … afficherX Pas de commande pr‚c‚dente … remplacer"!"X Pas de nom de fichier … substituer … %%X Pas de nom de fichier … substituer … #X Erreur : execl : %sX Erreur E/S : %sX Fichier modifi‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasserX Impossible de trouver l'emplacement du r‚pertoire d'origineX Nouveau r‚pertoire en cours : %sX Pas de tampon de coupure … afficherX La commande %s ne peut pas ˆtre utilis‚e … l'int‚rieur d'une commande globale ou commande vX %s/%s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚taires X %s/%s : ‚chec de source : vous n'ˆtes pas le propri‚taireX %s/%s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taireX %s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚tairesX %s : ‚chec de source : vous n'ˆtes pas le propri‚taireX %s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taireX Pas de lignes suivantes … joindreX Pas d'entr‚es de mappage d'entr‚eX Pas d'entr‚es de mappage de commandesX Le caractŠre %s ne peut pas ˆtre remapp‚X "%s" n'est pas actuellement mapp‚X Les noms de marque ne doivent avoir qu'un caractŠreX %s existe, non enregistr‚; utiliser ! pour outrepasserX Nouveau fichier exrc : %sX La ligne de destination est … l'int‚rieur de la plage … d‚placerX La commande ouverte n‚cessite que l'option ouverte soit d‚finieX La commande ouverte n'est pas encore impl‚ment‚eX La pr‚servation de ce fichier est impossibleX Fichier pr‚serv‚X %s: ‚tendu dans trop de noms de fichiersX Vous ne pouvez lire que les fichiers standards et les canaux de transmission nomm‚sX %s: Interdiction de lecture non disponibleX Lecture en cours...X %s: %lu lignes, %lu caractŠresX Pas d'‚crans d'arriŠre-plan … afficherX La commande script n'est disponible qu'en mode viX Pas de commande … ex‚cuterX Option de largeur de d‚calage d‚finie sur 0X Compter d‚passementX Compter d‚passement n‚gatifX Expression standard sp‚cifi‚e; drapeau r superfluX Vous ne pouvez pas en mode vi, combiner les drapeaux #, l et p avec le drapeau cX Aucune correspondance trouv‚eX Aucune marque pr‚c‚dente entr‚eX Moins de %s entr‚es dans la pile de marques ; utilisez t[ags]X Pas de fichier %s vers lequel retourner dans la pile de marques ; utiliser : affichage t[ags]X Appuyez sur Entr‚e pour continuer :X %s : marque introuvableX %s : marque corrompue en %sX %s : le num‚ro de ligne de la marque d‚passe la fin du fichierX La pile de marques est videX %s : motif de recherche introuvableX %d fichiers suppl‚mentaires … ‚diterX Le tampon %s est vide Confirmer les changements ? [n]X InterrompuX Pas de tampon pr‚c‚dent … ex‚cuterX Pas d'expression standard pr‚c‚denteX La commande %s n‚cessite qu'un fichier ait d‚j… ‚t‚ lu en m‚moireX Utilisation : %sX La commande visuelle n‚cessite que l'option ouverte soit d‚finieX Fichier videX Pas de recherche pr‚c‚dente F, f, T ou tX %s introuvableX Pas de fichier pr‚c‚dent … ‚diterX Le curseur n'est pas dans un nombreX Le nombre obtenu est trop grandX Le nombre obtenu est trop petitX Pas de correspondance de caractŠre sur cette ligneX CaractŠre correspondant introuvableX Pas de caractŠres … remplacerX Pas d'autre ‚cran vers lequel basculerX CaractŠres aprŠs la chaŒne de recherche, d‚calage de ligne et/ou commande zX Pas de motif de recherche pr‚c‚dentX La recherche est revenue … son point de d‚partX L'abr‚viation a d‚pass‚ la limite de l'expansion : caractŠres abandonn‚sX CaractŠre non valide ; guillemet pour saisirX D‚j… au d‚but de l'insertionX Plus de caractŠres … effacerX D‚placement hors de fin de fichierX D‚placement hors de fin de ligneX Aucun mouvement de curseur n'a ‚t‚ effectu‚X D‚j… au d‚but du fichierX D‚placement hors du d‚but du fichierX D‚j… dans la premiŠre colonneX Les tampons doivent ˆtre sp‚cifi‚s avant la commandeX D‚j… … la fin du fichierX D‚j… … la fin de la ligneX %s n'est pas une commande viX Utilisation : %sX Pas de caractŠres … supprimerX La commande Q n‚cessite une interface terminal exX Pas de commande … r‚p‚terX Le fichier est videX Vous ne pouvez pas utiliser %s comme commande de d‚placementX D‚j… en mode commandeX Le curseur n'est pas dans un motX Valeur optionnelle de fenˆtre trop grande, maximum est %uX AjouterX ChangerX CommandeX Ins‚rerX RemplacerX D‚placement hors de la fin d'‚cranX D‚placement hors du d‚but d'‚cranX L'‚cran doit ˆtre sup‚rieur … %d lignes pour se fractionnerX Il n'y a pas d'‚cran d'arriŠre-planX Il n'y a pas d'‚cran d'arriŠre-plan qui ‚dite un fichier nomm‚ %sX Vous ne pouvez pas mettre … l'arriŠre-plan votre seul ‚cran affich‚X L'‚cran ne peut ˆtre r‚duit qu'… %d rangsX L'‚cran n'est pas auto-r‚ductibleX L'‚cran n'est pas auto-extensibleX Vous ne pouvez pas mettre cet ‚cran en attenteX Interrompu : les touches affect‚es ont ‚t‚ abandonn‚esX vi : le tampon temporaire n' a pas ‚t‚ lib‚r‚X Ce terminal n'a pas de touche %sX Vous ne pouvez sp‚cifier qu'un seul tamponX Nombre sup‚rieur … %luX InterrompuX Impossible de cr‚er un fichier temporaireX Avertissement : %s n'est pas un fichier standardX %s d‚j… verrouill‚, session en lecture seuleX %s: supprimerX %s: fermerX %s: supprimerX %s: supprimerX Fichier en lecture seule, pas ‚crit, utiliser ! pour outrepasserX Fichier en lecture seule, pas ‚critX %s existe, pas ‚crit; utiliser ! pour outrepasserX %s existe, pas ‚critX Fichier partiel, pas ‚crit; utiliser ! pour outrepasserX Fichier partiel, pas ‚critX %s: fichier modifi‚ plus r‚cemment que cet exemplaire; utiliser ! pour outrepasserX %s: fichier modifi‚ plus r‚cemment que cet exemplaireX %s: interdiction d'‚criture non disponibleX Ecriture en cours...X %s: AVERTISSEMENT : FICHIER TRONQUEX PremiŠre marque de ce groupe d‚j… atteinteX %s: nouveau fichier : %lu lignes, %lu caractŠresX %s: %lu lignes, %lu caractŠresX %s ‚tendue … trop de noms de fichiersX %s: pas un fichier standardX %s: ne vous appartient pasX %s: accessible par un utilisateur autre que son propri‚taireX Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser X Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser :edit! pour outrepasserX Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasserX Fichier temporaire ; quitter annulera les modificationsX Fichier en lecture seule ; les modifications ne sont pas ‚crites automatiquementX Journal red‚marr‚X confirmer ? [ynq]X Appuyez sur n'importe quelle touche pour continuer : X Appuyez sur n'importe quelle touche pour continuer [: pour entrer plus de commandes ex] : X Appuyez sur n'importe quelle touche pour continuer [q pour Quitter]: X Cette forme de %s n‚cessite l'interface de terminal exX Entr‚e de mode entr‚e ex.X La commande a ‚chou‚, aucun fichier n'a encore ‚t‚ lu.X cont?X Ev‚nement impr‚vu de caractŠreX Ev‚nement impr‚vu de fin-de-fichierX Pas de correspondances pour cette requˆteX Ev‚nement impr‚vu d'interruptionX Ev‚nement quitter impr‚vuX Ev‚nement impr‚vu de rafraŒchissementX La derniŠre marque de ce groupe a d‚j… ‚t‚ atteinteX La commande %s n‚cessite l'interface de terminal exX Cette forme de %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚eX Ev‚nement impr‚vu de chaŒneX Ev‚nement impr‚vu de d‚lai impartiX Ev‚nement d'‚criture impr‚vuX Les expansions du shell ne sont pas reconnues quand l'option d'‚dition prot‚g‚e est activ‚eX La commande %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚eX D‚finition : l'option %s ne peut pas ˆtre d‚sactiv‚eX Affichage trop petit.X ajout‚X chang‚X supprim‚X jointX d‚plac‚X d‚cal‚X coup‚X ligneX lignesX Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur TclX Ficher modifi‚ depuis le dernier enregistrement.X L'expansion du shell a ‚chou‚X Pas d'option d'‚dition %s sp‚cifi‚eX Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur PerlX Pas de commande ex … ex‚cuterX Entrez pour ex‚cuter une commande, :q pour quitterX Utiliser "cscope help" pour obtenir de l'aideX Aucune connexion cscope n'est lanc‚eX %s : type de recherche inconnu : utiliser un des %sX %d : Il n'existe pas de telle session cscopeX D‚finition : l'option %s ne peut jamais ˆtre activ‚eX D‚finition : l'option %s ne peut jamais ˆtre d‚finie sur 0X %s: joints : %lu lignes, %lu caractŠresX ‚v‚nement impr‚vu de redimensionnementX %d fichiers … ‚diterX vigor-0.016.orig/catalog/french.base0100644000076400007640000003420307103707217016007 0ustar cjw44cjw44002 "D‚passement de longueur de ligne" 003 "impossible de supprimer la ligne %lu" 004 "impossible d'ajouter … la ligne %lu" 005 "impossible d'ins‚rer devant la ligne %lu" 006 "impossible de stocker la ligne %lu" 007 "impossible d'obtenir la derniŠre ligne" 008 "Erreur : impossible de r‚cup‚rer la ligne %lu" 009 "Fichier journal" 010 "Aucune connexion n'‚tant effectu‚e, impossible d'annuler" 011 "Aucune action … annuler" 012 "Aucune connexion n'‚tant effectu‚e, impossible d'annuler" 013 "Aucune connexion n'‚tant effectu‚e, reprise actualis‚e impossible" 014 "Aucune action … refaire" 015 "%s/%d : Erreur d'‚criture de journal" 016 "L'entr‚e et la sortie Vi standards doivent ˆtre un terminal" 017 "Marque %s : non d‚finie" 018 "Marque %s : la ligne a ‚t‚ supprim‚e" 019 "Marque %s : la position du curseur n'existe plus" 020 "Erreur : " 021 "nouveau fichier" 022 "le nom a chang‚" 023 "modifi‚" 024 "non modifi‚" 025 "DEVERROUILLE" 026 "lecture seule" 027 "ligne %lu de %lu [%ld%%]" 028 "fichier vide" 029 "ligne %lu" 030 "Ce fichier %s n'est pas un catalogue de messages" 031 "Impossible de configurer option %s par d‚faut" 032 "Utilisation : %s" 033 "D‚finition : pas d'option %s : 'tout d‚finir' donne toutes les valeurs optionnelles" 034 "D‚finition : option [no]%s ne prend pas de valeur" 035 "D‚finition : l'option %s n'est pas bool‚enne" 036 "D‚finition : option %s : %s" 037 "D‚finition : option %s : %s : D‚passement de valeur" 038 "D‚finition : option %s : %s n'est pas un nombre valide" 039 "D‚finition : l'option %s n'est pas bool‚enne" 040 "Les colonnes de l'‚cran sont trop petites, inf‚rieures … %d" 041 "Les colonnes de l'‚cran sont trop grandes, sup‚rieures … %d" 042 "Les lignes de l'‚cran sont trop courtes, inf‚rieures … %d" 043 "Les lignes de l'‚cran sont trop longues, sup‚rieures … %d" 044 "L'option lisp n'est pas impl‚ment‚e" 045 "Les messages ne sont pas d‚sactiv‚s : %s" 046 "Les messages ne sont pas activ‚s : %s" 048 "L'option de paragraphe doit ˆtre en groupe de deux caractŠres" 049 "L'option de section doit ˆtre en groupe de deux caractŠres" 053 "Le tampon par d‚faut est vide" 054 "Le tampon %s est vide" 055 "Les fichiers dont le nom contient des caractŠres de saut de ligne sont irr‚cup‚rables" 056 "Impossible de r‚cup‚rer les modifications si la session ‚choue" 057 "Copie en cours du fichier pour r‚cup‚ration..." 058 "La pr‚servation a ‚chou‚ : %s" 059 "Impossible de r‚cup‚rer les modifications si la session ‚choue" 060 "La sauvegarde du fichier a ‚chou‚ : %s" 061 "Copie en cours du fichier pour r‚cup‚ration..." 062 "Les renseignements sur l'identit‚ %u de l'utilisateur sont introuvables" 063 "Impossible de verrouiller le fichier de r‚cup‚ration" 064 "D‚bordement de tampon du fichier de r‚cup‚ration" 065 "Fichier de r‚cup‚ration" 066 "%s : Fichier de r‚cup‚ration malform‚" 067 "%s : Fichier de r‚cup‚ration malform‚" 068 "Aucun fichier nomm‚ %s … r‚cup‚rer, que vous puissiez lire" 069 "Il existe des versions r‚cup‚rables ant‚rieures … ce fichier" 070 "Vous avez d'autres fichiers … r‚cup‚rer" 071 "pas d'envoi d'email : %s" 072 "Fichier vide, rien … rechercher" 073 "Fin de fichier atteinte sans trouver le motif" 074 "Pas de motif de recherche pr‚c‚dent" 075 "Motif introuvable" 076 "D‚but du fichier atteint sans trouver le motif" 077 "La recherche est revenue … son point de d‚part" 078 "Recherche en cours..." 079 "CaractŠre non-imprimable introuvable" 080 "Nom de commande inconnu" 082 "%s : Commande non disponible en ex mode" 083 "Le compte ne peut ˆtre z‚ro" 084 "%s : mauvaise sp‚cification de ligne" 085 "Erreur de tableau de syntaxe interne (%s: %s)" 086 "Utilisation : %s" 087 "%s : tampon temporaire non lib‚r‚" 088 "D‚calage de drapeau hors de la ligne 1" 089 "D‚calage de drapeau hors de la fin du fichier" 090 "@ avec plage, en cours d'ex‚cution quand le fichier/l'‚cran a chang‚" 091 "Commande Global/v en cours d'ex‚cution quand le fichier/l'‚cran a chang‚" 092 "La commande ex a ‚chou‚ : commandes en attente abandonn‚es" 093 "La commande ex a ‚chou‚ : les touches affect‚es sont abandonn‚es" 094 "La deuxiŠme adresse est plus petite que la premiŠre" 095 "Aucun nom de marque fourni" 096 "\\ pas suivi par / ou ?" 097 "R‚f‚rence … un num‚ro de ligne inf‚rieure … 0" 098 "La commande %s est inconnue" 099 "D‚passement de la valeur adresse" 100 "D‚passement n‚gatif de la valeur adresse" 101 "Combinaison d'adresse non valide" 102 "Adresse non valide : il n'y a que des lignes %lu dans le fichier" 103 "Adresse non valide : le fichier est vide" 104 "La commande %s ne permet pas une adresse de 0" 105 "Pas d'abr‚viations … afficher" 106 "Les abr‚viations doivent finir par un caractŠre"mot" 107 "Les abr‚viations ne peuvent pas contenir de tabulations ni d'espaces" 108 "Les abr‚viations ne peuvent pas contenir un m‚lange de caractŠres mot/non-mot, sauf … la fin" 109 ""%s" n'est pas une abr‚viation" 110 "La commande Vi a ‚chou‚ : Les touches affect‚es ont ‚t‚ abandonn‚es" 111 "Plus de fichiers … ‚diter" 112 "Pas de fichiers pr‚c‚dents … ‚diter" 113 "Pas de fichiers pr‚c‚dents … rembobiner" 114 "Pas de liste de fichiers … afficher" 115 "Pas de commande pr‚c‚dente … remplacer"!"" 116 "Pas de nom de fichier … substituer … %%" 117 "Pas de nom de fichier … substituer … #" 118 "Erreur : execl : %s" 119 "Erreur E/S : %s" 120 "Fichier modifi‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser" 121 "Impossible de trouver l'emplacement du r‚pertoire d'origine" 122 "Nouveau r‚pertoire en cours : %s" 123 "Pas de tampon de coupure … afficher" 124 "La commande %s ne peut pas ˆtre utilis‚e … l'int‚rieur d'une commande globale ou commande v" 125 "%s/%s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚taires " 126 "%s/%s : ‚chec de source : vous n'ˆtes pas le propri‚taire" 127 "%s/%s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taire" 128 "%s : ‚chec de source : ni vous ni le super-utilisateur n'ˆtes les propri‚taires" 129 "%s : ‚chec de source : vous n'ˆtes pas le propri‚taire" 130 "%s : ‚chec de source : peut ˆtre ‚crit par un utilisateur autre que le propri‚taire" 131 "Pas de lignes suivantes … joindre" 132 "Pas d'entr‚es de mappage d'entr‚e" 133 "Pas d'entr‚es de mappage de commandes" 134 "Le caractŠre %s ne peut pas ˆtre remapp‚" 135 ""%s" n'est pas actuellement mapp‚" 136 "Les noms de marque ne doivent avoir qu'un caractŠre" 137 "%s existe, non enregistr‚; utiliser ! pour outrepasser" 138 "Nouveau fichier exrc : %s" 139 "La ligne de destination est … l'int‚rieur de la plage … d‚placer" 140 "La commande ouverte n‚cessite que l'option ouverte soit d‚finie" 141 "La commande ouverte n'est pas encore impl‚ment‚e" 142 "La pr‚servation de ce fichier est impossible" 143 "Fichier pr‚serv‚" 144 "%s: ‚tendu dans trop de noms de fichiers" 145 "Vous ne pouvez lire que les fichiers standards et les canaux de transmission nomm‚s" 146 "%s: Interdiction de lecture non disponible" 147 "Lecture en cours..." 148 "%s: %lu lignes, %lu caractŠres" 149 "Pas d'‚crans d'arriŠre-plan … afficher" 150 "La commande script n'est disponible qu'en mode vi" 151 "Pas de commande … ex‚cuter" 152 "Option de largeur de d‚calage d‚finie sur 0" 153 "Compter d‚passement" 154 "Compter d‚passement n‚gatif" 155 "Expression standard sp‚cifi‚e; drapeau r superflu" 156 "Vous ne pouvez pas en mode vi, combiner les drapeaux #, l et p avec le drapeau c" 157 "Aucune correspondance trouv‚e" 158 "Aucune marque pr‚c‚dente entr‚e" 159 "Moins de %s entr‚es dans la pile de marques ; utilisez t[ags]" 160 "Pas de fichier %s vers lequel retourner dans la pile de marques ; utiliser : affichage t[ags]" 161 "Appuyez sur Entr‚e pour continuer :" 162 "%s : marque introuvable" 163 "%s : marque corrompue en %s" 164 "%s : le num‚ro de ligne de la marque d‚passe la fin du fichier" 165 "La pile de marques est vide" 166 "%s : motif de recherche introuvable" 167 "%d fichiers suppl‚mentaires … ‚diter" 168 "Le tampon %s est vide 169 "Confirmer les changements ? [n]" 170 "Interrompu" 171 "Pas de tampon pr‚c‚dent … ex‚cuter" 172 "Pas d'expression standard pr‚c‚dente" 173 "La commande %s n‚cessite qu'un fichier ait d‚j… ‚t‚ lu en m‚moire" 174 "Utilisation : %s" 175 "La commande visuelle n‚cessite que l'option ouverte soit d‚finie" 177 "Fichier vide" 178 "Pas de recherche pr‚c‚dente F, f, T ou t" 179 "%s introuvable" 180 "Pas de fichier pr‚c‚dent … ‚diter" 181 "Le curseur n'est pas dans un nombre" 182 "Le nombre obtenu est trop grand" 183 "Le nombre obtenu est trop petit" 184 "Pas de correspondance de caractŠre sur cette ligne" 185 "CaractŠre correspondant introuvable" 186 "Pas de caractŠres … remplacer" 187 "Pas d'autre ‚cran vers lequel basculer" 188 "CaractŠres aprŠs la chaŒne de recherche, d‚calage de ligne et/ou commande z" 189 "Pas de motif de recherche pr‚c‚dent" 190 "La recherche est revenue … son point de d‚part" 191 "L'abr‚viation a d‚pass‚ la limite de l'expansion : caractŠres abandonn‚s" 192 "CaractŠre non valide ; guillemet pour saisir" 193 "D‚j… au d‚but de l'insertion" 194 "Plus de caractŠres … effacer" 195 "D‚placement hors de fin de fichier" 196 "D‚placement hors de fin de ligne" 197 "Aucun mouvement de curseur n'a ‚t‚ effectu‚" 198 "D‚j… au d‚but du fichier" 199 "D‚placement hors du d‚but du fichier" 200 "D‚j… dans la premiŠre colonne" 201 "Les tampons doivent ˆtre sp‚cifi‚s avant la commande" 202 "D‚j… … la fin du fichier" 203 "D‚j… … la fin de la ligne" 204 "%s n'est pas une commande vi" 205 "Utilisation : %s" 206 "Pas de caractŠres … supprimer" 207 "La commande Q n‚cessite une interface terminal ex" 208 "Pas de commande … r‚p‚ter" 209 "Le fichier est vide" 209 "Le fichier est vide" 210 "Vous ne pouvez pas utiliser %s comme commande de d‚placement" 211 "D‚j… en mode commande" 212 "Le curseur n'est pas dans un mot" 214 "Valeur optionnelle de fenˆtre trop grande, maximum est %u" 215 "Ajouter" 216 "Changer" 217 "Commande" 218 "Ins‚rer" 219 "Remplacer" 220 "D‚placement hors de la fin d'‚cran" 221 "D‚placement hors du d‚but d'‚cran" 222 "L'‚cran doit ˆtre sup‚rieur … %d lignes pour se fractionner" 223 "Il n'y a pas d'‚cran d'arriŠre-plan" 224 "Il n'y a pas d'‚cran d'arriŠre-plan qui ‚dite un fichier nomm‚ %s" 225 "Vous ne pouvez pas mettre … l'arriŠre-plan votre seul ‚cran affich‚" 226 "L'‚cran ne peut ˆtre r‚duit qu'… %d rangs" 227 "L'‚cran n'est pas auto-r‚ductible" 228 "L'‚cran n'est pas auto-extensible" 230 "Vous ne pouvez pas mettre cet ‚cran en attente" 231 "Interrompu : les touches affect‚es ont ‚t‚ abandonn‚es" 232 "vi : le tampon temporaire n' a pas ‚t‚ lib‚r‚" 233 "Ce terminal n'a pas de touche %s" 234 "Vous ne pouvez sp‚cifier qu'un seul tampon" 235 "Nombre sup‚rieur … %lu" 236 "Interrompu" 237 "Impossible de cr‚er un fichier temporaire" 238 "Avertissement : %s n'est pas un fichier standard" 239 "%s d‚j… verrouill‚, session en lecture seule" 240 "%s: supprimer" 241 "%s: fermer" 242 "%s: supprimer" 243 "%s: supprimer" 244 "Fichier en lecture seule, pas ‚crit, utiliser ! pour outrepasser" 245 "Fichier en lecture seule, pas ‚crit" 246 "%s existe, pas ‚crit; utiliser ! pour outrepasser" 247 "%s existe, pas ‚crit" 248 "Fichier partiel, pas ‚crit; utiliser ! pour outrepasser" 249 "Fichier partiel, pas ‚crit" 250 "%s: fichier modifi‚ plus r‚cemment que cet exemplaire; utiliser ! pour outrepasser" 251 "%s: fichier modifi‚ plus r‚cemment que cet exemplaire" 252 "%s: interdiction d'‚criture non disponible" 253 "Ecriture en cours..." 254 "%s: AVERTISSEMENT : FICHIER TRONQUE" 255 "PremiŠre marque de ce groupe d‚j… atteinte" 256 "%s: nouveau fichier : %lu lignes, %lu caractŠres" 257 "%s: %lu lignes, %lu caractŠres" 258 "%s ‚tendue … trop de noms de fichiers" 259 "%s: pas un fichier standard" 260 "%s: ne vous appartient pas" 261 "%s: accessible par un utilisateur autre que son propri‚taire" 262 "Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser " 263 "Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser :edit! pour outrepasser" 264 "Fichier modif‚ depuis la derniŠre ‚criture complŠte ; ‚crire ou utiliser ! pour outrepasser" 265 "Fichier temporaire ; quitter annulera les modifications" 266 "Fichier en lecture seule ; les modifications ne sont pas ‚crites automatiquement" 267 "Journal red‚marr‚" 268 "confirmer ? [ynq]" 269 "Appuyez sur n'importe quelle touche pour continuer : " 270 "Appuyez sur n'importe quelle touche pour continuer [: pour entrer plus de commandes ex] : " 271 "Appuyez sur n'importe quelle touche pour continuer [q pour Quitter]: " 272 "Cette forme de %s n‚cessite l'interface de terminal ex" 273 "Entr‚e de mode entr‚e ex." 274 "La commande a ‚chou‚, aucun fichier n'a encore ‚t‚ lu." 275 "cont?" 276 "Ev‚nement impr‚vu de caractŠre" 277 "Ev‚nement impr‚vu de fin-de-fichier" 278 "Pas de correspondances pour cette requˆte" 279 "Ev‚nement impr‚vu d'interruption" 280 "Ev‚nement quitter impr‚vu" 281 "Ev‚nement impr‚vu de rafraŒchissement" 282 "La derniŠre marque de ce groupe a d‚j… ‚t‚ atteinte" 283 "La commande %s n‚cessite l'interface de terminal ex" 284 "Cette forme de %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚e" 285 "Ev‚nement impr‚vu de chaŒne" 286 "Ev‚nement impr‚vu de d‚lai imparti" 287 "Ev‚nement d'‚criture impr‚vu" 289 "Les expansions du shell ne sont pas reconnues quand l'option d'‚dition prot‚g‚e est activ‚e" 290 "La commande %s n'est pas reconnue quand l'option d'‚dition prot‚g‚e est activ‚e" 291 "D‚finition : l'option %s ne peut pas ˆtre d‚sactiv‚e" 292 "Affichage trop petit." 293 "ajout‚" 294 "chang‚" 295 "supprim‚" 296 "joint" 297 "d‚plac‚" 298 "d‚cal‚" 299 "coup‚" 300 "ligne" 301 "lignes" 302 "Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur Tcl" 303 "Ficher modifi‚ depuis le dernier enregistrement." 304 "L'expansion du shell a ‚chou‚" 304 "L'expansion du shell a ‚chou‚" 305 "Pas d'option d'‚dition %s sp‚cifi‚e" 306 "Vi n'a pas ‚t‚ charg‚ avec un interpr‚tateur Perl" 307 "Pas de commande ex … ex‚cuter" 308 "Entrez pour ex‚cuter une commande, :q pour quitter" 309 "Utiliser "cscope help" pour obtenir de l'aide" 310 "Aucune connexion cscope n'est lanc‚e" 311 "%s : type de recherche inconnu : utiliser un des %s" 312 "%d : Il n'existe pas de telle session cscope" 313 "D‚finition : l'option %s ne peut jamais ˆtre activ‚e" 314 "D‚finition : l'option %s ne peut jamais ˆtre d‚finie sur 0" 315 "%s: joints : %lu lignes, %lu caractŠres" 316 "‚v‚nement impr‚vu de redimensionnement" 317 "%d fichiers … ‚diter" vigor-0.016.orig/catalog/german0100644000076400007640000002746507103707217015116 0ustar cjw44cjw44VI_MESSAGE_CATALOG Zeilenlaengen UeberlaufX kann Zeile %lu nicht loeschenX kann an Zeile %lu nicht anfuegenX kann in Zeile %lu nicht einfuegenX kann Zeile %lu nicht speichernX kann letzte Zeile nicht lesenX Fehler: kann Zeile %lu nicht wiederherstellenX ProtokolldateiX Keine Protokollierung aktiv, rueckgaengig machen nicht moeglichX Keine Aenderungen rueckgaengig zu machenX Keine Protokollierung aktiv, rueckgaengig machen nicht moeglichX Keine Protokollierung aktiv, Wiederholung von Aenderungen nicht moeglichX Keine Aenderungen zu wiederholenX %s/%d: ProtokollschreibfehlerX Vi's Standardein- und ausgabe muss ein Terminal seinX Marke %s: nicht gesetztX Marke %s: die Zeile wurde geloeschtX Marke %s: Cursorposition existiert nicht mehrX Fehler: X neue DateiX Name geaendertX geaendertX nicht geaendertX NICHT GELOCKEDX nur zum LesenX Zeile %lu von %lu [%ld%%]X leere DateiX Zeile %luX Die Datei %s ist kein MeldungskatalogX Setzen der Voreinstellung fuer %s Option nicht moeglichX Benutzung: %sX set: keine %s Option: 'set all' zeigt alle Optionen mit Werten anX set: der [no]%s Option kann kein Wert zugewiesen werdenX set: %s ist keine boolsche OptionX set: %s Option: %sX set: %s Option: %s: Wert UeberlaufX set: %s Option: %s ist eine ungueltige ZahlX set: %s ist keine boolsche OptionX Anzeige hat zu wenig Spalten, weniger als %dX Anzeige hat zu viele Spalten, mehr als %dX Anzeige hat zu wenig Zeilen, weniger als %dX Anzeige hat zu viele Zeilen, mehr als %dX Die lisp Option ist nicht implementiertX Messages nicht abgeschalten: %sX Messages nicht eingeschalten: %sX Die paragraph Option muss Gruppen zu zwei Zeichen enthaltenX Die section Option muss Gruppen zu zwei Zeichen enthaltenX Der Standardpuffer ist leerX Puffer %s ist leerX Dateien mit newlines im Namen sind nicht wiederherstellbarX Aenderungen nicht wiederherstellbar falls die Editorsitzung schief gehtX kopiere Datei fuer Wiederherstellung ...X Rettungsmechanismus funktioniert nicht: %sX Aenderungen nicht wiederherstellbar falls die Editorsitzung schief gehtX Sicherung der Datei gescheitert: %sX kopiere Datei fuer Wiederherstellung ...X Informationen ueber den Benutzer mit id %u nicht gefundenX Wiederherstellungsdatei kann nicht gesperrt werdenX Puffer der Wiederherstellungsdatei uebergelaufenX WiederherstellungsdateiX %s: Wiederherstellungsdatei hat falsches FormatX %s: Wiederherstellungsdatei hat falsches FormatX Keine von Ihnen lesbaren Dateien mit Namen %s zum WiederherstellenX Es gibt aeltere Versionen dieser Datei von Ihnen zum WiederherstellenX Sie haben noch andere Dateien zum WiederherstellenX schicke keine email: %sX Datei leer; nichts zu suchenX Dateiende erreicht, ohne das Suchmuster zu findenX Kein altes SuchmusterX Suchmuster nicht gefundenX Dateianfang erreicht, ohne das Suchmuster zu findenX Suche umgeschlagenX suche ...X Keine nichtdruckbaren Zeichen gefundenX Unbekannter KommandonameX %s: Kommando im ex Modus nicht verfuegbarX Count darf nicht Null seinX %s: falsche ZeilenangabeX Interner Syntaxtabellenfehler (%s: %s)X Benutzung: %sX %s: temporaerer Puffer nicht freigegebenX Flagoffset vor Zeile 1X Flagoffset hinter dem DateiendeX @ mit Bereich lief als Datei/Anzeige geaendert wurdeX globales oder v-Kommando lief als Datei/Anzeige geaendert wurdeX Ex Kommando misslungen: restliche Kommandoeingabe ignoriertX Ex Kommando misslungen: umdefinierte Tasten ungueltigX Die zweite Adresse ist kleiner als die ersteX Kein Markenname angegebenX \\ ohne folgenden / oder ?X Referenz auf eine negative ZeilennummerX Das Kommando %s ist unbekanntX Adresswert zu grossX Adresswert zu kleinX Ungueltige AdresskombinationX Ungueltige Adresse: nur %lu Zeilen in der DateiX Ungueltige Adresse: die Datei ist leerX Das Kommando %s erlaubt keine Adresse 0X Keine Abkuerzungen zum AnzeigenX Abkuerzungen muessen mit einem "Wort"-Zeichen endenX Abkuerzungen duerfen keine Tabulator- oder Leerzeichen enthaltenX In Abkuerzungen duerfen ausser am Ende Wort- und Nicht-Wort-Zeichen nicht gemischt werdenX "%s" ist keine AbkuerzungX Vi Kommando misslungen: umdefinierte Tasten ungueltigX Keine weiteren Dateien zu edierenX Keine vorhergehenden Dateien zu edierenX Keine vorhergehenden Dateien fuer rewindX Keine Dateiliste zum AnzeigenX Kein vorhergehendes Kommando um "!" zu ersetzenX Kein Dateiname fuer %%X Kein Dateiname fuer #X Fehler: execl: %sX I/O Fehler: %sX Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX Kann Homedirectory nicht bestimmenX Neues aktuelles Directory: %sX Keine Puffer anzuzeigenX Das Kommando %s kann nicht als Teil eines global oder v Kommandos verwendet werdenX %s/%s: nicht gelesen: gehoehrt weder Ihnen noch rootX %s/%s: nicht gelesen: gehoehrt nicht IhnenX %s/%s: nicht gelesen: anderer Benutzer als Eigentuemer hat SchreibrechtX %s: nicht gelesen: gehoehrt weder Ihnen noch rootX %s: nicht gelesen: gehoehrt nicht IhnenX %s: nicht gelesen: anderer Benutzer als Eigentuemer hat SchreibrechtX Keine folgenden Zeilen zum VerbindenX Kein Eingabe-Map EintragX Kein Kommando-Map EintragX Das %s Zeichen kann nicht umgemappt werdenX "%s" ist momentan nicht gemapptX Markennamen muessen einzelne Buchstaben seinX %s existiert, nicht geschrieben; verwende ! zum UeberschreibenX Neue .exrc Datei: %s. X Zielzeile ist innerhalb des VerschiebebereichsX Das open Kommando verlangt, dass die open Option gesetzt istX Das open Kommando ist nocht nicht implementiertX Rettung dieser Datei nicht moeglichX Datei gerettetX %s wurde in zu viele Dateinamen expandiertX Nur regulaere Dateien und named pipes koennen gelesen werdenX %s: Lesesperrung war nicht moeglichX lese ...X %s: %lu Zeilen, %lu ZeichenX Keine Hintegrundanzeigen vorhandenX Das script Kommando ist nur im vi Modus verfuegbarX Kein Kommando auszufuehrenX shiftwidth Option auf 0 gesetztX Count ueberlaufX Count unterlaufX Regulaerer Ausdruck angegeben; r Flag bedeutungslosX Die #, l und p Flags koennen im vi Modus nicht mit dem c Flag kombiniert werdenX Keine Uebereinstimmung gefundenX Kein vorhergehender 'tag' angegebenX Weniger als %s Eintraege auf dem 'tag'-Stack; verwende :display t[ags]X Keine Datei namens %s auf dem 'tag'-Stack; verwende :display t[ags]X Druecke Enter um fortzufahren: X %s: 'tag' nicht gefundenX %s: kaputter 'tag' in %sX %s: die Zeilennummer des 'tag' ist hinter dem DateiendeX Der 'tag' Stack ist leerX %s: Suchmuster nicht gefundenX %d weitere Dateien zu edierenX Puffer %s ist leerX Bestaetige Aenderung [n]X Unterbrochen.X Kein vorhergehender Puffer zum AusfuehrenX Kein vorhergehender regulaerer AusdruckX Das Kommando %s verlangt, dass bereits eine Datei eingelesen wurdeX Benutzung: %sX Das visual Kommando verlangt dass die open Option gesetzt istX Leere DateiX Keine vorhergehende F, f, T oder t SucheX %s nicht gefundenX Keine vorhergehende Datei zu edierenX Cursor nicht auf einer ZahlX Sich ergebende Zahl ist zu grossX Sich ergebende Zahl ist zu kleinX Kein korrespondierendes Zeichen in dieser ZeileX Korrespondierendes Zeichen nicht gefundenX Keine Zeichen zu ersetzenX Keine andere Anzeige zum HinschaltenX Zeichen nach Suchmuster, Zeilenoffset und/oder z KommandoX Kein altes SuchmusterX Suche zur urspruenglichen Position umgeschlagenX Abkuerzung ueberschreitet Expansionsgrenze: Zeichen weggelassenX Nicht erlaubtes Zeichen; maskiere zum EingebenX Bereits am Anfang der EingabeX Keine weiteren Zeichen zu loeschenX Bewegung hinter das DateiendeX Bewegung hinter das ZeilenendeX Keine Cursorbewegung gemachtX Bereits am DateianfangX Bewegung vor den DateianfangX Bereits in der ersten SpalteX Puffer sollen vor dem Kommando angegeben werdenX Bereits am DateiendeX Bereits am ZeilenendeX %s ist kein vi KommandoX Benutzung: %sX Keine Zeichen zu loeschenX Das Q Kommando benoetigt das ex Terminal InterfaceX Kein Kommando zu wiederholenX Die Datei ist leerX %s kann nicht als Bewegungskommando verwendet werdenX Bereits im Kommando-ModusX Cursor nicht auf einem WortX Wert der Window Option ist zu gross, max ist %uX AnfuegenX AendernX KommandoX EinfuegenX ErsetzenX Bewegung hinter das AnzeigenendeX Bewegung vor den AnzeigenanfangX Anzeige muss zum Zerlegen groesser als %d seinX Keine Hintergrundanzeigen vorhandenX Es gibt keine Hintergrundanzeige die eine Datei namens %s ediertX Die einzige dargestellte Anzeige kann nicht in den Hintergrund gebracht werdenX Die Anzeige kann nur auf %d Zeilen verkleinert werdenX Die Anzeige kann nicht verkleinert werdenX Die Anzeige kann nicht vergroessert werdenX Diese Anzeige kann nicht gestopped werdenX Unterbrochen: umdefinierte Tasten ungueltigX vi: temporaerer Puffer nicht freigegebenX Dieses Terminal hat keine %s TasteX es kann nur ein Puffer angegeben werdenX Zahl groesser als %luX UnterbrochenX Nicht moeglich temporaere Datei anzulegenX Warnung: %s ist keine regulaere DateiX %s ist bereits gesperrt, nur-lese EditorsitzungX %s: loeschenX %s: schliessenX %s: loeschenX %s: loeschenX Nur-lese Datei, nicht geschrieben; verwende ! zum UeberschreibenX Nur-lese Datei, nicht geschriebenX %s existiert, nicht geschrieben; verwende ! zum UeberschreibenX %s existiert, nicht geschriebenX Teil der Datei, nicht geschrieben; verwende ! zum UeberschreibenX Teil der Datei, nicht geschriebenX %s: Datei wurde spaeter als diese Kopie veraendert; verwende ! zum UeberschreibenX %s: Datei wurde spaeter als diese Kopie veraendertX %s: Schreibsperrung war nicht moeglichX schreibe ...X %s: WARNUNG: DATEI ABGESCHNITTENX Bereits am ersten 'tag' dieser GruppeX %s: neue Datei: %lu Zeilen, %lu ZeichenX %s: %lu Zeilen, %lu ZeichenX %s wurde in zu viele Dateinamen expandiertX %s: keine regulaere DateiX %s: gehoehrt nicht IhnenX %s: anderer Benutzer als Eigentuemer hat ZugriffX Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende :edit! zum ignorierenX Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX Datei ist temporaer; beim Verlassen gehen die Aenderungen verlorenX Nur-lese Datei, Aenderungen werden nicht automatisch geschriebenX Portokollierung neu begonnenX bestaetigen [ynq]X Druecke beliebige Taste um fortzufahrenX Druecke beliebige Taste um fortzufahren [: um weitere Kommandos einzugeben]: X Druecke beliebige Taste um fortzufahren [q zum Verlassen]: X Diese Form von %s benoetigt das ex Terminal-InterfaceX Gehe in ex Eingabe-Modus.\nX Kommando schief gelaufen, noch keine Datei eingelesenX weiter?X unerwartetes Zeichen - EreignisX unerwartetes Dateiende - EreignisX Keine Position zum Anspringen gefundenX unerwartetes Unterbrechungs - EreignisX unerwartetes Verlassen - EreignisX unerwartetes Wiederherstellungs - EreignisX Bereits am letzten 'tag' dieser GruppeX Das %s Kommando benoetigt das ex Terminal-InterfaceX Diese Form von %s wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt istX unerwartetes Zeichenketten - EreignisX unerwartetes timeout - EreignisX unerwartetes Schreibe - EreignisX Shell Expandierungen nicht unterstuetzt wenn die 'secure edit' - Option gesetzt istX Das %s Kommando wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt istX set: %s kann nicht ausgeschaltet werdenX Anzeige zu klein.X angefuegtX geaendertX geloeschtX verbundenX verschobenX geschobenX in Puffer geschriebenX ZeileX ZeilenX Vi wurde nicht mit dem Tcl Interpreter gelinktX Datei wurde seit dem letzten Schreiben veraendert.X Shell Expansion nicht geklapptX Es ist keine %s Edieroption angegebenX Vi wurde nicht mit einem Perl Interpreter geladenX Kein ex Kommando auszufuehrenX Druecke um ein Kommando auszufuehren, :q zum verlassenX Verwende "cscope help" fuer HilestellungX Keine cscope Verbindung aktivX %s: unbekannter Suchtyp: verwende einen aus %sX %d: keine solche cscope VerbindungX set: die %s Option kann nicht eingeschaltet werdenX set: die %s Option kann nicht auf 0 gesetzt werdenX %s: angefuegt: %lu Zeilen, %lu ZeichenX unerwartetes Groessenveraenderungs - EreignisX %d Dateien zu edierenX vigor-0.016.orig/catalog/spanish0100644000076400007640000003043507103707217015301 0ustar cjw44cjw44VI_MESSAGE_CATALOG Desbordamiento de longitud de l¡neaX no se puede borrar la l¡nea %luX no se puede a¤adir la l¡nea %luX no se puede insertar en la l¡nea %luX no se puede guardar la l¡nea %luX no se puede obtener la £ltima l¡neaX Error: no se puede recuperar la l¡nea %luX Archivo de logX No se realiza log, no se puede deshacerX No hay cambios para deshacerX No se realiza log, no se puede deshacerX No se realiza log, no se puede remontar hacia adelanteX No hay cambios para rehacerX %s/%d: error de logX La entrada y salida est ndar de Vi debe ser una terminalX Marcar %s: no determinadoX Marcar %s: se borr¢ la l¡neaX Marcar %s: la posici¢n del cursor ya no existeX Error: X nuevo archivoX nombre cambiadoX modificadoX no modificadoX DESTRABADOX lectura solamenteX l¡nea %lu de %lu [%ld%%]X archivo vac¡oX l¡nea %luX El archivo %s no es un cat logo de mensajesX No se puede determinar la opci¢n por omisi¢n %sX Uso: %sX determinar: no hay opci¢n %s: 'determinar todo' establece todos los valores de opci¢nX determinar: [no] hay opci¢n %s no tiene valorX determinar: opci¢n %s no es booleanoX determinar: opci¢n %s: %sX determinar: opci¢n %s: %s: desbordamiento de valoresX determinar: opci¢n %s: %s es un n£mero ilegalX determinar: opci¢n %s no es booleanoX Las columnas en pantalla son demasiado peque¤as, menos de %dX Las columnas en pantalla son demasiado grandes, m s de %dX Las l¡neas en pantalla son demasiado peque¤as, menos de %dX Las l¡neas en pantalla son demasiado grandes, m s de %dX La opci¢n lisp no est  implementadaX mensajes no desconectados: %sX mensajes no conectados: %sX La opci¢n de p rrafo debe estar en dos grupos de caracteresX La opci¢n de secci¢n debe estar en dos grupos de caracteresX El buffer por omisi¢n est  vac¡oX El buffer %s est  vac¡oX Los archivos con nuevas l¡neas en el nombre son irrecuperablesX Las modificaciones no pueden recuperarse si la sesi¢n fallaX Copiando archivo para recuperaci¢n...X Preservaci¢n fracasada: %sX Las modificaciones no pueden recuperarse si la sesi¢n fallaX Archivo de respaldo fracasado: %sX Copiando archivo para recuperaci¢n...X Informaci¢n sobre identificaci¢n del usuario %u no encontradaX No se puede trabar archivo de recuperaci¢nX Desbordamiento de buffer de archivo de recuperaci¢nX Archivo de recuperaci¢nX %s: archivo de recuperaci¢n defectuosoX %s: archivo de recuperaci¢n defectuosoX No hay archivos denominados %s, que usted pueda leer, para recuperarX Existen versiones m s antiguas de este archivo que usted puede recuperarX Existen otros archivos que usted puede recuperarX no env¡a email: %sX Archivo vac¡o; no hay nada para buscarX Se alcanz¢ el final del archivo sin encontrar el patr¢nX No hay patr¢n anterior de b£squedaX No se encontr¢ el patr¢nX Se alcanz¢ el principio del archivo sin encontrar el patr¢nX B£squeda reiniciadaX Buscando...X No se encontr¢ ning£n car cter no imprimibleX Nombre de comando desconocidoX %s: comando no disponible en modalidad exX La cuenta no puede ser ceroX %s: mala especificaci¢n de l¡neaX Error interno de tabla de sintaxis (%s: %s)X Uso: %sX %s: buffer temporario no liberadoX Desplazamiento de marcador a antes de la l¡nea 1X Desplazamiento de marcador m s all  del final del archivoX @ con rango que corre cuando se cambia el archivo/la pantallaX Comando global/v que corre cuando se cambia el archivo/la pantallaX Comando Ex fracasado: comandos pendientes descartadosX Comando Ex fracasado: teclas mapeadas descartadasX La segunda direcci¢n es m s peque¤a que la primeraX No se suministra nombre de marcaX \\ no es seguido por / o ?X Referencia a un n£mero de l¡nea menor que 0X El comando %s es desconocidoX Desbordamiento de valor de direcci¢nX Subdesbordamiento de valor de direcci¢nX Combinaci¢n de direcci¢n ilegalX Direcci¢n ilegal: s¢lo %lu l¡neas en el archivoX Direcci¢n ilegal: el archivo est  vac¡oX El comando %s no permite una direcci¢n de 0X No hay abreviaturas para visualizarX Las abreviaturas deben terminar con un car cter de \"palabra\" X Las abreviaturas no pueden contener tabs o espaciosX Las abreviaturas no pueden mezclar caracteres palabra/no-palabra, salvo al finalX \"%s\" no es una abreviaturaX Comando Vi fracasado: teclas mapeadas descartadasX No hay m s archivos para editarX No hay archivos anteriores para editarX No hay archivos anteriores para rebobinarX No hay lista de archivos para visualizarX No hay un comando anterior para reemplazar a \"!\"X No hay nombre de archivo para sustituir por %%X No hay nombre de archivo para sustituir por #X Error: execl: %sX Error de E/S: %sX Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX No se puede encontrar la ubicaci¢n del directorio inicialX Nuevo directorio actual: %sX No hay buffers sueltos para visualizarX El comando %s no puede usarse como parte de un comando global o vX %s/%s: sin fuente: no le pertenece a usted o a ra¡zX %s/%s: sin fuente: no le pertenece a ustedX %s/%s: sin fuente: puede ser escrito por un usuario que no sea el propietarioX %s: sin fuente: no le pertenece a usted o a ra¡zX %s: sin fuente: no le pertenece a ustedX %s: sin fuente: puede ser escrito por un usuario que no sea el propietarioX No hay l¡neas siguientes para unirX No hay anotaciones de mapa de entradaX No hay anotaciones de mapa de comandoX El car cter %s no puede remapearseX \"%s\" no est  mapeado actualmenteX Marca de nombres debe ser un s¢lo car cterX %s existe, no est  escrito; usar ! para alterarX Nuevo archivo exrc: %sX La l¡nea de destino se encuentra dentro del rango de movimientoX El comando abierto requiere que se determine la opci¢n abiertaX El comando abierto no se ha implementado a£nX No es posible preservar este archivoX Archivo preservadoX %s: expandido a demasiados nombres de archivoX S¢lo pueden leerse los archivos regulares y los conductos nombradosX %s: traba de lectura no disponibleX Leyendo...X %s: %lu l¡neas, %lu caracteresX No hay pantallas de fondo para mostrarX El comando de script s¢lo est  disponible en modalidad viX No hay comando para ejecutarX opci¢n de ancho de desplazamiento en 0X Desbordamiento de cuentaX Subdesbordamiento de cuentaX Expresi¢n regular especificada; marcador r no tiene significadoX Los marcadores #, l y p no pueden combinarse con el marcador c en la modalidad viX No se encontr¢ coincidenciaX No se ingres¢ un identificador anteriorX Se encontraron menos de %s anotaciones en la pila de identificadores; usar :visualizar i[dentificadores]X No hay archivo %s en la pila de identificadores al que se pueda volver; usar :visualizar i[dentificadores]" Presionar Intro para continuar: X %s: no se encontr¢ el identificadorX %s: identificador corrompido en %sX %s: el n£mero de l¡nea del identificador es posterior al final del archivoX La pila de identificadores est  vac¡aX %s: patr¢n de b£squeda no encontradoX %d archivos m s para editarX El buffer %s est  vac¡oX ¨Confirmar cambio? [n]X InterrumpidoX No hay buffer anterior para ejecutarX No hay expresi¢n regular anteriorX El comando %s requiere que se haya le¡do un archivoX Uso: %sX El comando visual requiere que se determine la opci¢n abiertaX Archivo vac¡oX No hay b£squeda F, f, T o t anteriorX %s no se encontr¢X No hay archivo anterior para editarX El cursor no est  en un n£meroX El n£mero resultante es demasiado grandeX El n£mero resultante es demasiado peque¤oX No hay car cter coincidente en esta l¡neaX No se encontr¢ un car cter coincidenteX No hay caracteres para reemplazarX No hay otra pantalla a la que se pueda pasarX Caracteres despu‚s de cadena de b£squeda, desplazamiento de l¡nea y/o comando zX No hay patr¢n anterior de b£squedaX B£squeda vuelve a la posici¢n inicialX Se super¢ el l¡mite de expansi¢n de abreviatura: se descartaron caracteresX Car cter ilegal; mencionar para entrarX Ya se encuentra al principio de la inserci¢nX No hay m s caracteres para borrarX Movimiento m s all  del final del archivoX Movimiento m s all  del final de la l¡neaX No hay movimiento del cursorX Ya se encuentra al principio del archivoX Movimiento m s all  del principio del archivoX Ya se encuentra en la primera columnaX Los buffers deben especificarse antes del comandoX Ya se encuentra al final del archivoX Ya se encuentra al final de la l¡neaX %s no es un comando viX Uso: %sX No hay caracteres para borrarX El comando Q requiere la interfase de terminal exX No hay comando para repetirX El archivo est  vac¡oX %s no puede usarse como comando de movimientoX Ya se encuentra en modalidad de comandoX El cursor no se encuentra en una palabraX El valor de opci¢n de Windows es demasiado grande, el m x. es %uX A¤adirX CambiarX ComandoX InsertarX ReemplazarX El movimiento va m s all  del final de la pantallaX El movimiento va m s all  del principio de la pantallaX La pantalla debe tener m s de %d l¡neas para dividirseX No hay pantallas de fondoX No hay pantalla de fondo editando un archivo denominado %sX No se puede poner fondo a la £nica pantalla que se visualizaX La pantalla s¢lo puede reducirse a %d hilerasX La pantalla no puede reducirseX La pantalla no puede aumentarseX Esta pantalla no puede suspenderseX Interrumpido: teclas mapeadas descartadasX vi: buffer temporario no liberadoX Esta terminal no tiene tecla %sX S¢lo un buffer puede especificarseX N£mero mayor que %luX InterrumpidoX No se puede crear archivo temporarioX Advertencia: %s no es un archivo regularX %s ya se encuentra trabado, la sesi¢n es de lectura solamenteX %s: eliminarX %s: cerrarX %s: eliminarX %s: eliminarX Archivo de lectura solamente, no escrito; usar ! para alterarX Archivo de lectura solamente, no escritoX %s existe, no escrito; usar ! para alterarX %s existe, no escritoX Archivo parcial, no escrito; usar ! para alterarX Archivo parcial, no escritoX %s: archivo modificado m s recientemente que esta copia; usar ! para alterarX %s: archivo modificado m s recientemente que esta copiaX %s: la traba de escritura no estaba disponibleX Escribiendo...X %s: ADVERTENCIA: ARCHIVO TRUNCADOX Ya se encuentra en el primer identificador de este grupoX %s: nuevo archivo: %lu l¡neas, %lu caracteresX %s: %lu l¡neas, %lu caracteresX %s expandido a demasiados nombres de archivosX %s: no es un archivo regularX %s: no le perteneceX %s: accesible por un usuario que no sea el propietarioX Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX Archivo modificado desde la £ltima escritura completa; escribir o usar :editar! para alterarX Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX El archivo es temporario; al salir se descartar n las modificacionesX Archivo de lectura solamente, las modificaciones no se autoescribenX Se reinici¢ el logX confirmar? [snq]X Presionar cualquier tecla para continuar: X Presionar cualquier tecla para continuar [: para ingresar m s comandos ex]: X Presionar cualquier tecla para continuar [q para salir]: X Esta forma de %s requiere la interfase terminal exX Ingresando en la modalidad de entrada ex.X Comando fracasado, no hay archivo le¡do aun.X cont?X Evento inesperado de car cterX Evento inesperado de final de archivoX No hay coincidencias para consultaX Evento inesperado de interrupci¢nX Evento inesperado de salidaX Evento inesperado de repinturaX Ya se encuentra en el £ltimo identificador de este grupoX El comando %s requiere la interfase terminal exX Esta forma de %s no se encuentra soportada cuando se determina la opci¢n de edici¢n seguraX Evento inesperado de cadenaX Evento inesperado de tiempo excedidoX Evento inesperado de escrituraX Las expansiones de shell no se encuentran soportadas cuando se determina la opci¢n de edici¢n seguraX El comando %s no se encuentra soportado cuando se determina la opci¢n de edici¢n seguraX determinar: la opci¢n %s puede no estar desconectadaX El monitor es demasiado peque¤o.X agregadoX cambiadoX borradoX unidoX movidoX desplazadoX arrancadoX l¡neaX l¡neasX Vi no se carg¢ con un int‚rprete TclX Archivo modificado desde la £ltima escritura.X Expansi¢n de shell fracasadaX No hay opci¢n de edici¢n %s especificadaX Vi no se carg¢ con un int‚rprete PerlX No hay comando ex para ejecutarX Ingresar para ejecutar un comando, :q para salirX Usar \"cscope ayuda\" para obtener ayudaX No hay conexiones cscope corriendoX %s: tipo de b£squeda desconocido: usar uno de %sX %d: no existe esta sesi¢n cscopeX determinar: la opci¢n %s no puede conectarse nuncaX determinar: la opci¢n %s no puede determinarse nunca en 0X %s: a¤adido: %lu l¡neas, %lu caracteresX Evento inesperado de modificaci¢n de tama¤oX %d archivos para editarX vigor-0.016.orig/catalog/german.base0100644000076400007640000003243007103707217016013 0ustar cjw44cjw44002 "Zeilenlaengen Ueberlauf" 003 "kann Zeile %lu nicht loeschen" 004 "kann an Zeile %lu nicht anfuegen" 005 "kann in Zeile %lu nicht einfuegen" 006 "kann Zeile %lu nicht speichern" 007 "kann letzte Zeile nicht lesen" 008 "Fehler: kann Zeile %lu nicht wiederherstellen" 009 "Protokolldatei" 010 "Keine Protokollierung aktiv, rueckgaengig machen nicht moeglich" 011 "Keine Aenderungen rueckgaengig zu machen" 012 "Keine Protokollierung aktiv, rueckgaengig machen nicht moeglich" 013 "Keine Protokollierung aktiv, Wiederholung von Aenderungen nicht moeglich" 014 "Keine Aenderungen zu wiederholen" 015 "%s/%d: Protokollschreibfehler" 016 "Vi's Standardein- und ausgabe muss ein Terminal sein" 017 "Marke %s: nicht gesetzt" 018 "Marke %s: die Zeile wurde geloescht" 019 "Marke %s: Cursorposition existiert nicht mehr" 020 "Fehler: " 021 "neue Datei" 022 "Name geaendert" 023 "geaendert" 024 "nicht geaendert" 025 "NICHT GELOCKED" 026 "nur zum Lesen" 027 "Zeile %lu von %lu [%ld%%]" 028 "leere Datei" 029 "Zeile %lu" 030 "Die Datei %s ist kein Meldungskatalog" 031 "Setzen der Voreinstellung fuer %s Option nicht moeglich" 032 "Benutzung: %s" 033 "set: keine %s Option: 'set all' zeigt alle Optionen mit Werten an" 034 "set: der [no]%s Option kann kein Wert zugewiesen werden" 035 "set: %s ist keine boolsche Option" 036 "set: %s Option: %s" 037 "set: %s Option: %s: Wert Ueberlauf" 038 "set: %s Option: %s ist eine ungueltige Zahl" 039 "set: %s ist keine boolsche Option" 040 "Anzeige hat zu wenig Spalten, weniger als %d" 041 "Anzeige hat zu viele Spalten, mehr als %d" 042 "Anzeige hat zu wenig Zeilen, weniger als %d" 043 "Anzeige hat zu viele Zeilen, mehr als %d" 044 "Die lisp Option ist nicht implementiert" 045 "Messages nicht abgeschalten: %s" 046 "Messages nicht eingeschalten: %s" 048 "Die paragraph Option muss Gruppen zu zwei Zeichen enthalten" 049 "Die section Option muss Gruppen zu zwei Zeichen enthalten" 053 "Der Standardpuffer ist leer" 054 "Puffer %s ist leer" 055 "Dateien mit newlines im Namen sind nicht wiederherstellbar" 056 "Aenderungen nicht wiederherstellbar falls die Editorsitzung schief geht" 057 "kopiere Datei fuer Wiederherstellung ..." 058 "Rettungsmechanismus funktioniert nicht: %s" 059 "Aenderungen nicht wiederherstellbar falls die Editorsitzung schief geht" 060 "Sicherung der Datei gescheitert: %s" 061 "kopiere Datei fuer Wiederherstellung ..." 062 "Informationen ueber den Benutzer mit id %u nicht gefunden" 063 "Wiederherstellungsdatei kann nicht gesperrt werden" 064 "Puffer der Wiederherstellungsdatei uebergelaufen" 065 "Wiederherstellungsdatei" 066 "%s: Wiederherstellungsdatei hat falsches Format" 067 "%s: Wiederherstellungsdatei hat falsches Format" 068 "Keine von Ihnen lesbaren Dateien mit Namen %s zum Wiederherstellen" 069 "Es gibt aeltere Versionen dieser Datei von Ihnen zum Wiederherstellen" 070 "Sie haben noch andere Dateien zum Wiederherstellen" 071 "schicke keine email: %s" 072 "Datei leer; nichts zu suchen" 073 "Dateiende erreicht, ohne das Suchmuster zu finden" 074 "Kein altes Suchmuster" 075 "Suchmuster nicht gefunden" 076 "Dateianfang erreicht, ohne das Suchmuster zu finden" 077 "Suche umgeschlagen" 078 "suche ..." 079 "Keine nichtdruckbaren Zeichen gefunden" 080 "Unbekannter Kommandoname" 082 "%s: Kommando im ex Modus nicht verfuegbar" 083 "Count darf nicht Null sein" 084 "%s: falsche Zeilenangabe" 085 "Interner Syntaxtabellenfehler (%s: %s)" 086 "Benutzung: %s" 087 "%s: temporaerer Puffer nicht freigegeben" 088 "Flagoffset vor Zeile 1" 089 "Flagoffset hinter dem Dateiende" 090 "@ mit Bereich lief als Datei/Anzeige geaendert wurde" 091 "globales oder v-Kommando lief als Datei/Anzeige geaendert wurde" 092 "Ex Kommando misslungen: restliche Kommandoeingabe ignoriert" 093 "Ex Kommando misslungen: umdefinierte Tasten ungueltig" 094 "Die zweite Adresse ist kleiner als die erste" 095 "Kein Markenname angegeben" 096 "\\ ohne folgenden / oder ?" 097 "Referenz auf eine negative Zeilennummer" 098 "Das Kommando %s ist unbekannt" 099 "Adresswert zu gross" 100 "Adresswert zu klein" 101 "Ungueltige Adresskombination" 102 "Ungueltige Adresse: nur %lu Zeilen in der Datei" 103 "Ungueltige Adresse: die Datei ist leer" 104 "Das Kommando %s erlaubt keine Adresse 0" 105 "Keine Abkuerzungen zum Anzeigen" 106 "Abkuerzungen muessen mit einem "Wort"-Zeichen enden" 107 "Abkuerzungen duerfen keine Tabulator- oder Leerzeichen enthalten" 108 "In Abkuerzungen duerfen ausser am Ende Wort- und Nicht-Wort-Zeichen nicht gemischt werden" 109 ""%s" ist keine Abkuerzung" 110 "Vi Kommando misslungen: umdefinierte Tasten ungueltig" 111 "Keine weiteren Dateien zu edieren" 112 "Keine vorhergehenden Dateien zu edieren" 113 "Keine vorhergehenden Dateien fuer rewind" 114 "Keine Dateiliste zum Anzeigen" 115 "Kein vorhergehendes Kommando um "!" zu ersetzen" 116 "Kein Dateiname fuer %%" 117 "Kein Dateiname fuer #" 118 "Fehler: execl: %s" 119 "I/O Fehler: %s" 120 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorieren" 121 "Kann Homedirectory nicht bestimmen" 122 "Neues aktuelles Directory: %s" 123 "Keine Puffer anzuzeigen" 124 "Das Kommando %s kann nicht als Teil eines global oder v Kommandos verwendet werden" 125 "%s/%s: nicht gelesen: gehoehrt weder Ihnen noch root" 126 "%s/%s: nicht gelesen: gehoehrt nicht Ihnen" 127 "%s/%s: nicht gelesen: anderer Benutzer als Eigentuemer hat Schreibrecht" 128 "%s: nicht gelesen: gehoehrt weder Ihnen noch root" 129 "%s: nicht gelesen: gehoehrt nicht Ihnen" 130 "%s: nicht gelesen: anderer Benutzer als Eigentuemer hat Schreibrecht" 131 "Keine folgenden Zeilen zum Verbinden" 132 "Kein Eingabe-Map Eintrag" 133 "Kein Kommando-Map Eintrag" 134 "Das %s Zeichen kann nicht umgemappt werden" 135 ""%s" ist momentan nicht gemappt" 136 "Markennamen muessen einzelne Buchstaben sein" 137 "%s existiert, nicht geschrieben; verwende ! zum Ueberschreiben" 138 "Neue .exrc Datei: %s. " 139 "Zielzeile ist innerhalb des Verschiebebereichs" 140 "Das open Kommando verlangt, dass die open Option gesetzt ist" 141 "Das open Kommando ist nocht nicht implementiert" 142 "Rettung dieser Datei nicht moeglich" 143 "Datei gerettet" 144 "%s wurde in zu viele Dateinamen expandiert" 145 "Nur regulaere Dateien und named pipes koennen gelesen werden" 146 "%s: Lesesperrung war nicht moeglich" 147 "lese ..." 148 "%s: %lu Zeilen, %lu Zeichen" 149 "Keine Hintegrundanzeigen vorhanden" 150 "Das script Kommando ist nur im vi Modus verfuegbar" 151 "Kein Kommando auszufuehren" 152 "shiftwidth Option auf 0 gesetzt" 153 "Count ueberlauf" 154 "Count unterlauf" 155 "Regulaerer Ausdruck angegeben; r Flag bedeutungslos" 156 "Die #, l und p Flags koennen im vi Modus nicht mit dem c Flag kombiniert werden" 157 "Keine Uebereinstimmung gefunden" 158 "Kein vorhergehender 'tag' angegeben" 159 "Weniger als %s Eintraege auf dem 'tag'-Stack; verwende :display t[ags]" 160 "Keine Datei namens %s auf dem 'tag'-Stack; verwende :display t[ags]" 161 "Druecke Enter um fortzufahren: " 162 "%s: 'tag' nicht gefunden" 163 "%s: kaputter 'tag' in %s" 164 "%s: die Zeilennummer des 'tag' ist hinter dem Dateiende" 165 "Der 'tag' Stack ist leer" 166 "%s: Suchmuster nicht gefunden" 167 "%d weitere Dateien zu edieren" 168 "Puffer %s ist leer" 169 "Bestaetige Aenderung [n]" 170 "Unterbrochen." 171 "Kein vorhergehender Puffer zum Ausfuehren" 172 "Kein vorhergehender regulaerer Ausdruck" 173 "Das Kommando %s verlangt, dass bereits eine Datei eingelesen wurde" 174 "Benutzung: %s" 175 "Das visual Kommando verlangt dass die open Option gesetzt ist" 177 "Leere Datei" 178 "Keine vorhergehende F, f, T oder t Suche" 179 "%s nicht gefunden" 180 "Keine vorhergehende Datei zu edieren" 181 "Cursor nicht auf einer Zahl" 182 "Sich ergebende Zahl ist zu gross" 183 "Sich ergebende Zahl ist zu klein" 184 "Kein korrespondierendes Zeichen in dieser Zeile" 185 "Korrespondierendes Zeichen nicht gefunden" 186 "Keine Zeichen zu ersetzen" 187 "Keine andere Anzeige zum Hinschalten" 188 "Zeichen nach Suchmuster, Zeilenoffset und/oder z Kommando" 189 "Kein altes Suchmuster" 190 "Suche zur urspruenglichen Position umgeschlagen" 191 "Abkuerzung ueberschreitet Expansionsgrenze: Zeichen weggelassen" 192 "Nicht erlaubtes Zeichen; maskiere zum Eingeben" 193 "Bereits am Anfang der Eingabe" 194 "Keine weiteren Zeichen zu loeschen" 195 "Bewegung hinter das Dateiende" 196 "Bewegung hinter das Zeilenende" 197 "Keine Cursorbewegung gemacht" 198 "Bereits am Dateianfang" 199 "Bewegung vor den Dateianfang" 200 "Bereits in der ersten Spalte" 201 "Puffer sollen vor dem Kommando angegeben werden" 202 "Bereits am Dateiende" 203 "Bereits am Zeilenende" 204 "%s ist kein vi Kommando" 205 "Benutzung: %s" 206 "Keine Zeichen zu loeschen" 207 "Das Q Kommando benoetigt das ex Terminal Interface" 208 "Kein Kommando zu wiederholen" 209 "Die Datei ist leer" 210 "%s kann nicht als Bewegungskommando verwendet werden" 211 "Bereits im Kommando-Modus" 212 " Cursor nicht auf einem Wort" 214 "Wert der Window Option ist zu gross, max ist %u" 215 "Anfuegen" 216 "Aendern" 217 "Kommando" 218 "Einfuegen" 219 "Ersetzen" 220 "Bewegung hinter das Anzeigenende" 221 "Bewegung vor den Anzeigenanfang" 222 "Anzeige muss zum Zerlegen groesser als %d sein" 223 "Keine Hintergrundanzeigen vorhanden" 224 "Es gibt keine Hintergrundanzeige die eine Datei namens %s ediert" 225 "Die einzige dargestellte Anzeige kann nicht in den Hintergrund gebracht werden" 226 "Die Anzeige kann nur auf %d Zeilen verkleinert werden" 227 "Die Anzeige kann nicht verkleinert werden" 228 "Die Anzeige kann nicht vergroessert werden" 230 "Diese Anzeige kann nicht gestopped werden" 231 "Unterbrochen: umdefinierte Tasten ungueltig" 232 "vi: temporaerer Puffer nicht freigegeben" 233 "Dieses Terminal hat keine %s Taste" 234 "es kann nur ein Puffer angegeben werden" 235 "Zahl groesser als %lu" 236 "Unterbrochen" 237 "Nicht moeglich temporaere Datei anzulegen" 238 "Warnung: %s ist keine regulaere Datei" 239 "%s ist bereits gesperrt, nur-lese Editorsitzung" 240 "%s: loeschen" 241 "%s: schliessen" 242 "%s: loeschen" 243 "%s: loeschen" 244 "Nur-lese Datei, nicht geschrieben; verwende ! zum Ueberschreiben" 245 "Nur-lese Datei, nicht geschrieben" 246 "%s existiert, nicht geschrieben; verwende ! zum Ueberschreiben" 247 "%s existiert, nicht geschrieben" 248 "Teil der Datei, nicht geschrieben; verwende ! zum Ueberschreiben" 249 "Teil der Datei, nicht geschrieben" 250 "%s: Datei wurde spaeter als diese Kopie veraendert; verwende ! zum Ueberschreiben" 251 "%s: Datei wurde spaeter als diese Kopie veraendert" 252 "%s: Schreibsperrung war nicht moeglich" 253 "schreibe ..." 254 "%s: WARNUNG: DATEI ABGESCHNITTEN" 255 "Bereits am ersten 'tag' dieser Gruppe" 256 "%s: neue Datei: %lu Zeilen, %lu Zeichen" 257 "%s: %lu Zeilen, %lu Zeichen" 258 "%s wurde in zu viele Dateinamen expandiert" 259 "%s: keine regulaere Datei" 260 "%s: gehoehrt nicht Ihnen" 261 "%s: anderer Benutzer als Eigentuemer hat Zugriff" 262 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorieren" 263 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende :edit! zum ignorieren" 264 "Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorieren" 265 "Datei ist temporaer; beim Verlassen gehen die Aenderungen verloren" 266 "Nur-lese Datei, Aenderungen werden nicht automatisch geschrieben" 267 "Portokollierung neu begonnen" 268 "bestaetigen [ynq]" 269 "Druecke beliebige Taste um fortzufahren" 270 "Druecke beliebige Taste um fortzufahren [: um weitere Kommandos einzugeben]: " 271 "Druecke beliebige Taste um fortzufahren [q zum Verlassen]: " 272 "Diese Form von %s benoetigt das ex Terminal-Interface" 273 "Gehe in ex Eingabe-Modus.\n" 274 "Kommando schief gelaufen, noch keine Datei eingelesen" 275 " weiter?" 276 "unerwartetes Zeichen - Ereignis" 277 "unerwartetes Dateiende - Ereignis" 278 "Keine Position zum Anspringen gefunden" 279 "unerwartetes Unterbrechungs - Ereignis" 280 "unerwartetes Verlassen - Ereignis" 281 "unerwartetes Wiederherstellungs - Ereignis" 282 "Bereits am letzten 'tag' dieser Gruppe" 283 "Das %s Kommando benoetigt das ex Terminal-Interface" 284 "Diese Form von %s wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt ist" 285 "unerwartetes Zeichenketten - Ereignis" 286 "unerwartetes timeout - Ereignis" 287 "unerwartetes Schreibe - Ereignis" 289 "Shell Expandierungen nicht unterstuetzt wenn die 'secure edit' - Option gesetzt ist" 290 "Das %s Kommando wird nicht unterstuetzt wenn die 'secure edit' - Option gesetzt ist" 291 "set: %s kann nicht ausgeschaltet werden" 292 "Anzeige zu klein." 293 "angefuegt" 294 "geaendert" 295 "geloescht" 296 "verbunden" 297 "verschoben" 298 "geschoben" 299 "in Puffer geschrieben" 300 "Zeile" 301 "Zeilen" 302 "Vi wurde nicht mit dem Tcl Interpreter gelinkt" 303 "Datei wurde seit dem letzten Schreiben veraendert." 304 "Shell Expansion nicht geklappt" 305 "Es ist keine %s Edieroption angegeben" 306 "Vi wurde nicht mit einem Perl Interpreter geladen" 307 "Kein ex Kommando auszufuehren" 308 "Druecke um ein Kommando auszufuehren, :q zum verlassen" 309 "Verwende "cscope help" fuer Hilestellung" 310 "Keine cscope Verbindung aktiv" 311 "%s: unbekannter Suchtyp: verwende einen aus %s" 312 "%d: keine solche cscope Verbindung" 313 "set: die %s Option kann nicht eingeschaltet werden" 314 "set: die %s Option kann nicht auf 0 gesetzt werden" 315 "%s: angefuegt: %lu Zeilen, %lu Zeichen" 316 "unerwartetes Groessenveraenderungs - Ereignis" 317 "%d Dateien zu edieren" vigor-0.016.orig/catalog/ru_SU.KOI8-R0100644000076400007640000002004407103707217015574 0ustar cjw44cjw44VI_MESSAGE_CATALOG pEREPOLNENIE ZNA^ENIQ DLINY STROKIX %s/%d: NEWOZMOVNO UDALITX STROKU %uX %s/%d: NEWOZMOVNO DOBAWITX K STROKE %uX %s/%d: NEWOZMOVNO WSTAWITX W STROKU %uX %s/%d: NEWOZMOVNO SOHRANITX STROKU %uX %s/%d: NEWOZMOVNO DOSTATX POSLEDN@@ STROKUX fAJL ZAPISEJX zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX nET IZMENENIJ DLQ OTMENYX zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX zAPISI NE WELISX, NEWOZMOVNO PROSMOTRETX WPEREDX nET IZMENENIJ DLQ PEREDELKIX %s/%d: O[IBKA PRI ZAPISI PROTOKOLAX sTANDARTNYJ WWOD/WYWOD DLQ VI DOLVEN BYTX TERMINALX oTMETKA %s: NE USTANOWLENAX oTMETKA %s: STROKA BYLA UDALENAX oTMETKA %s: POZICII KURSORA BOLX[E NE SU]ESTWUETX o[IBKA:X fAJL %s NE QWLQETSQ KATALOGOM SOOB]ENIJX nEWOZMOVNO USTANOWITX OPCI@ %s PO UMOL^ANI@X iSPOLXZOWANIE: %sX oPCII %s NET: 'set all' POKAZYWAET WSE WOZMOVNYE OPCIIX set: [no]%s NE PRINIMAET TAKOGO ZNA^ENIQX set: %s OPCIQ NE QWLQETSQ DWOI^NOJX set: NEPRAWILXNOE ZNA^ENIE %sX set: %s OPCIQ NE QWLQETSQ DWOI^NOJX kOLI^ESTWO KOLONOK \KRANA SLI[KOM MALO, MENX[E ^EM %dX kOLI^ESTWO KOLONOK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %dX kOLI^ESTWO STROK \KRANA SLI[KOM MALO, MENX[E ^EM %dX kOLI^ESTWO STROK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %dX oPCIQ lisp OTSUTSTWUETX sOOB]ENIQ NE WYKL@^ENY: %sX sOOB]ENIQ NE WKL@^ENY: %sX oPCIQ modeline(s) NE MOVET BYTX PEREUSTANOWLENAX oPCIQ paragraph DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMIX oPCIQ section DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMIX oPCIQ shiftwidth NE MOVET BYTX USTANOWLENA NA 0X oPCIQ sourceany NE MOVET BYTX USTANOWLENAX tABULQCIQ NE MOVET BYTX USTANOWLENA NA 0X sTARTOWYJ BUFER PUSTX bUFER %s PUSTX fAJLY S SIMWOLAMI PEREWODA STROKI W IMENI NE MOGUT BYTX WOSSTANOWLENYX iZMENENIQ NE SOHRANENY PRI KRAHE SESSIIX sOHRANENIE NE UDALOSX: %sX iZMENENIQ NE SOHRANQ@TSQ PRI OBRYWE SESSIIX sOHRANENIE KOPII FAJLA NE UDALOSX: %sX iNFORMACII NA POLXZOWATELQ %u NE NAJDENOX nEWOZMOVNO ZA]ITITX SPASENNYJ FAJLX bUFER WOSSTANOWLENNOGO FAJLA PEREPOLNENX wOSSTANOWLENNYJ FAJLX %s: NE DO KONCA WOSSTANOWLENNYJ FAJLX %s: NE DO KONCA WOSSTANOWLENNYJ FAJLX fAJLOW S IMENEM %s, KOTORYE wY MOVETE ^ITATX, NE SU]ESTWUETX eSTX STARYE WERSII FAJLA, KOTORYE MOVNO WOSSTANOWITXX sU]ESTWU@T DRUGIE FAJLY, KOTORYE MOVNO WOSSTANOWITXX E-mail NE POSLAN: %sX fAJL PUST - ISKATX NE^EGOX dOSTIGNUT KONEC FAJLA BEZ NAHOVDENIQ OBRAZCA POISKAX nE ZADAN OBRAZEC POISKAX oBRAZEC POISKA NE NAJDENX dOSTUPNO NA^ALO FAJLA BEZ NAHOVDENIQ OBRAZCA POISKAX pOISK ZACIKLENX nEPE^ATNYH SIMWOLOW NE NAJDENOX nEIZWESTNAQ KOMANDAX kOMANDA NE DOSTUPNA W REVIME exX s^ET^IK NE MOVET BYTX NULEMX %s: NEPRAWILXNOE UKAZANIE STROKIX wNUTRENNQQ O[IBKA W SINTAKSISE (%s: %s)X iSPOLXZOWANIE: %sX %s: WREMENNYJ BUFER NE ISPOLXZOWANX mETKA POSTAWLENA PERED STROKOJ 1X mETKA POSTAWLENA POSLE KONCA FAJLAX kOMANDA ex NE UDALASX: PARAMETRY KOMANDY ZABYTYX wTOROJ ADRES MENX[E ^EM PERWYJX nE UKAZANO NAZWANIE OTMETKIX \\ NE ZAWER[AETSQ / ILI ?X sSYLKA K STROKE S NOMEROM MENX[E 0X kOMANDA %s NEIZWESTNAX pEREPOLNENIE ZNA^ENIQ ADRESAX nEDOBOR ZNA^ENIQ ADRESAX nEDOPUSTIMAQ KOMBINACIQ W ADRESEX nEPRAWILXNYJ ADRES: WSEGO %lu STROK W FAJLEX nEPRAWILXNYJ ADRES: FAJL PUSTX kOMMANDA %s NE MOVET ISPOLXZOWATX ADRES 0X aBBREWIATURY OTSUTSTWU@TX aBBREWIATURY DOLVNY ZAKAN^IWATXSQ SIMWOLOM "word"X aBBREWIATURY NE MOGUT SODERVATX SIMWOLOY TABLQCII ILI PROBELYX aBBREWIATURY NE MOGUT SO^ETATXSQ S SIMWOLAMI SLOW/NE-SLOW, ZA ISKL@^ENIEM KONCA STROKIX "%s" NE QWLQETSQ ABBREWIATUROJX fAJLOW DLQ REDAKTIROWANIQ BOLX[E NETX oTSUTSTWIE PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQX oTSUTSTWIE PREDYDU]EGO FAJLA DLQ PROSMOTRA NAZADX nET FAJLOWX oTSUTSTWIE PREDYDU]EJ KOMANDY DLQ ZAMENY "!"X oTSUTSTWIE ZAMENY DLQ %%X oTSUTSTWIE ZAMENY DLQ #X o[IBKA: execl: %sX o[IBKA WWODA/WYWODA: %sX fAJL IZMENEN S MOMENTA POSLEDNEJ POLNOJ ZAPISI: ISPOLXZUJTE ! DLQ OBHODAX nEWOZMOVNO NAJTI DOMA[NIJ KATALOGX nOWYJ KATALOG: %sX nET WYREZANYH BUFEROWX kOMANDA %s NE MOVET BYTX ISPOLXZOWANA WNUTRI OB]EJ KOMANDYX %s/%s: NE OTKRYT: NE PRINADLEVIT wAM ILI root-UX %s/%s: NE OTKRYT: NE PRINADLEVIT wAMX %s/%s: NE OTKRYT: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEMX %s/%s: NE S^ITAN: NE PRINADLEVIT wAM ILI root-UX %s/%s: NE S^ITAN: NE PRINADLEVIT wAMX %s/%s: NE S^ITAN: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEMX pOSLEDU@]IE STROKI OTSUTSTWU@TX oTSUTSTWIE PARAMETROW WWODAX oTSUTSTWIE PARAMETROW KOMANDYX sIMWOL %s NE MOVET BYTX PEREZAPOMNENX "%s" NA DANNYJ MOMENT NE OTME^ENX iMQ METKI DOLVNO BYTX ODNIM SIMWOLOMX %s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX nOWYJ FAJL .exrc: %sX sTROKA PERENOSA NAHODITSQ WNUTRI PARAMETROW PERENOSAX kOMANDA open PODRAZUMEWAET USTANOWKU OPCII openX kOMANDA open NE REALIZOWANAX zA]ITA FAJLA NEWOZMOVNAX fAJL ZA]I]ENX %s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX %s: ZA]ITA NA ^TENIE BYLA NEDOSTUPNAX %s: %lu STROK, %lu SIMWOLOWX nET TENEWYH OKONX kOMANDA script ISPOLXZUETSQ TOLXKO W REVIME viX nET KOMANDY DLQ ISPOLNENIQX oPCIQ shiftwidth USTANOWLENA NA 0X pEREPOLNENIE S^ET^IKAX cIKL WYPOLNEN NE DO KONCAX uKAZANO REGULQRNOE WYRAVENIE: FLAG r NE NUVENX fLAGI #, l I p NE MOGUT BYTX OB_EDINENY S FLAGOM c W REVIME viX sOWPADENIJ NETX mETKA OTSUTSTWUETX w STEKE METOK ZAPISEJ MENX[E, ^EM %s, ISPOLXZUJTE :display t[ags]X fAJLA S IMENEM %s W STEKE METOK NET; ISPOLXZUJTE :display t[ags]X %s: METKA NE NAJDENAX %s: PLOHAQ METKA W %sX sTEK METOK PUSTX %s: ISKOMAQ PEREMENNAQ NE NAJDENAX bUFER %s PUSTX pRERWANOX oTSUTSTWIE BUFERA DLQ ISPOLXZOWANIQX nET PREDIDU]EGO REGULQRNOGO WYRAVENIQX kOMANDA %s PODRAZUMEWAET NALI^IE PRO^TENNOGO FAJLAX iSPOLXZOWANIE: %sX kOMANDA visual PODRAZUMEWAET OBQZATELXNU@ USTANOWKU OPCII openX %s RAS[IRILSQ DO SLI[KOM BOLX[OGO KOLI^ESTWA FAJLOWX pUSTOJ FAJLX nET PREDYDU]EGO POISKA F, f, T, ILI tX %s NE NAJDENOX nET PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQX kURSOR STOIT NE NA CIFREX pOLU^ENNOE ^ISLO SLI[KOM WELIKOX pOLU^ENNOE ^ISLO SLI[KOM MALOX pODHODQ]EGO SIMWOLA NET NA \TOJ STROKEX pODHODQ]IJ SIMWOL NE NAJDENX nET SIMWOLOW DLQ UDALENIQX dRUGOGO \KRANA NE SU]ESTWUETX sIMWOLY POSLE STROKI DLQ POISKA I/ILI PEREBOR STROKIX pRO[LYJ OBRAZEC POISKA OTSUTSTWUETX pOISK ZAWER[ILSQ NA NA^ALXNOJ POZICIIX sIMWOL NEPRAWILEN; ZAKL@^EN W KAWY^KI DLQ WWODAX uVE NA NA^ALE WSTAWKIX nET SIMWOLOW DLQ UDALENIQX pEREDWIVENIE ZA KONEC FAJLAX pEREDWIVENIE ZA KONEC STROKIX dWIVENIE STROKI NE SDELANOX uVE NA NA^ALE FAJLAX dWIVENIE KURSORA ZA NA^ALO FAJLAX uVE W PERWOJ KOLONKEX bUFERY DOLVNY BYTX UKAZANY DO WYPOLNENIQ KOMANDYX uVE NA KONCE FAJLAX uVE NA KONSE STROKIX %s NE QWLQETSQ KOMANDOJ VIX iSPOLXZOWANIE: %sX nET SIMWOLOW DLQ UDALENIQX nET KOMANDY DLQ POWTORAX kOMANDA %s NE MOVET BYTX ISPOLXZOWANA KAK KOMANDA PRODWIVENIQX ~ISLO BOLX[E ^EM %luX zNA^ENIE KOLI^ESTWA OKON SLI[KOM WELIKO, MAKSIMALXNOE ZNA^ENIE = %uX dWIVENIE KURSORA ZA KONEC \KRANAX dWIVENIE KURSORA ZA NA^ALO \KRANAX tENEWYH OKON NETX nE SU]ESTWUET TENEWOGO OKNA S REDAKTIROWANIEM FAJLA %sX wY NE MOVETE SDELATX EDINSTWENNOE OKNO TENEWYMX |KRAN MOVET BYTX SVATX |KRAN NE MOVET BYTX SVATX |KRAN NE MOVET BYTX RAS[IRENX dANNYJ TIP TERMINALA NE IMEET KLAWI[I %sX nEWOZMOVNO SOZDATX WREMENNYJ FAJLX wNIMANIE: %s SPECIALXNYJ FAJLX %s UVE ZABLOKIROWAN, DOSTUPEN TOLXKO NA ^TENIEX %s: UDALENX %s: ZAKRYTX %s: UDALENX %s: UDALENX fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN: iSPOLXZUJTE ! DLQ OBHODAX fAJL TOLXKO DLQ ^TENIQ, NE ZAPISANX %s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX %s SU]ESTWUET, NE ZAPISANX iSPOLXZUJTE ! DLQ ^ASTI^NOJ ZAPISI FAJLAX ~ASTX FAJLA, FAJL NE ZAPISANX %s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ: ISPOLXZUJTE ! DLQ OBHODAX %s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQX %s: ZA]ITA NA ZAPISX BYLA NEDOSTUPNAX %s: wnimanie: fajl use~enX %s: NOWYJ FAJL: %lu STROK, %lu SIMWOLOWX %s: %lu STROK, %lu SIMWOLOWX %s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX %s SPECIALXNYJ FAJLX %s: NE PRINADLEVIT wAMX %s: DOSTUPEN NE TOLXKO wAMX fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE :edit DLQ OBHODAX fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX fAJL WREMENNYJ: WYHOD SOTRET L@BYE IZMENENIQX zAPISI NA^ATY ZANOWOX vigor-0.016.orig/catalog/swedish0100644000076400007640000002450507103707217015303 0ustar cjw44cjw44VI_MESSAGE_CATALOG För långa raderX kan inte ta bort rad %luX kan inte lägga till på rad %luX kan inte sätta in på rad %luX kan inte lagra rad %luX kan inte hämta sista radenX Fel: kan inte hämta rad %luX LoggningsfilX Loggning utförs inte, ångra är inte möjligtX Inga ändringar att ångraX Loggning utförs inte, ångra är inte möjligtX Loggning utförs inte, ångra ångra är inte möjligtX Inga ändringar att återgöraX %s/%d: fel vid loggningX Vi:s standard in och ut måste gå till en terminalX Markering %s: inte sattX Markering %s: raden har tagits bortX Markering %s: markörpositionen finns inte längreX Fel: X ny filX namnet ändradesX ändradX oförändradX OLÅSTX inte skrivbarX rad %lu av %lu [%ld%%]X tom filX rad %luX Filen %s är ingen meddelandekatalogX Kan inte sätta standardvärde för %s flagganX Användning: %sX set: %s är en okänd flagga: "set all" visar alla flaggorX set: [no]%s flaggan kan inte ges ett värdeX set: %s flaggan är inte boleanskX set: %s flaggan: %sX set: %s flaggan: %s: för stort värdeX set: %s flaggan: %s är ett otillåtet talX set: %s flaggan är inte boleanskX Fönsterkolumnerna är för få, mindre än %dX Fönsterkolumnerna är för många, fler än %dX Fönsterraderna är för få, mindre än %dX Fönsterraderna är för många, fler än %dX Lisp flaggan är inte implementeradX meddelanden är inte avslagna: %sX meddelanden är inte påslagna: %sX Paragraph flaggan måste ges i teckengrupper om tvåX Section flaggan måste ges i teckengrupper om tvåX Standardbufferten är tomX Buffer %s är tomX Filer med radmatning i namnet kan inte återskapasX Ändringar kan inte återskapas om programmet krascharX Kopierar filen för återskapning...X Säkerhetskopiering misslyckades: %sX Ändringar kan inte återskapas om programmet krascharX Misslyckades att säkerhetskopiera filen: %sX Kopierar filen för återskapning...X Kan inte hitta information om användaridentitet %uX Kan inte låsa återskapningsfilenX Återskapningsfilens buffer överskrivenX ÅterskapningsfilX %s: Återskapningsfilen är korruptX %s: Återskapningsfilen är korruptX Det finns ingen fil %s, läsbar av dig, att återskapaX Det finns äldre versioner av denna fil som du kan återskapaX Det finns andra filer du kan återskapaX skickar inte email: %sX Filen är tom; inget att söka iX Kom till slutet på filen utan att hitta söksträngenX Ingen tidigare söksträngX Hittar inte söksträngenX Kom till början av filen utan att hitta söksträngenX Sökningen slog runtX Söker...X Inga icke skrivbara tecken funnaX Okänt kommandonamnX %s: kommandot är inte tillgängligt i "ex" lägeX Talet får inte vara nollX %s: Ogiltig radspecifikationX Fel i intern syntaxtabell (%s: %s)X Användning: %sX %s: temporärbuffert inte frisläpptX Offset är före rad 1X Offset är efter slutet på filenX @ med intervall exekverades när filen/fönstret ändradesX Global/v kommando exekverades när filen/fönstret ändradesX Ex kommando misslyckades: efterföljande kommandon ignoreradeX Ex kommando misslyckades: omdefinierade tangenter ignoreradeX Den andra adressen är mindre än den förstaX Inget namn på markering givetX \\ följs inte av / eller ?X Referens till ett radnummer mindre än 0X %s kommandot är inte käntX Värdet på adressen är för stortX Värdet på adressen är för litetX Otillåten adresskombinationX Otillåten adress: bara %lu rader finns i filenX Otillåten adress: filen är tomX %s kommandot tillåter inte en adress som är 0X Inga förkortningar att visaX Förkortningar måste sluta med ett "ord" teckenX Förkortningar kan inte innehålla mellanslag eller tabX Förkortningar kan inte blanda "ord"/"icke ord" tecken, utom i slutetX "%s" är ingen förkortningX Vi kommando misslyckades: omdefinierade tangenter ignoreradeX Inga fler filer att editeraX Inga tidigare filer att editeraX Inga tidigare filer att spela tillbakaX Ingen fillista att visaX Inget tidigare kommando att ersätta "!" medX Inget filnamn att ersätta %% medX Inget filnamn att ersätta # medX Fel: execl: %sX I/O fel: %sX Filen ändrad efter sista skrivning; spara eller använd !X Kan inte hitta hemkatalogX Ny nuvarande katalog: %sX Inga "cut buffers" att visaX %s kommandot kan inte används som del i ett "global" eller v kommandoX %s/%s: inte läst: varken du eller root är ägareX %s/%s: inte läst: du är inte ägareX %s/%s: inte läst: skrivbar av annan än ägarenX %s: inte läst: varken du eller root är ägareX %s: inte läst: du är inte ägareX %s: inte läst: skrivbar av annan än ägarenX Ingen nästa rad att sätta ihop medX Det finns inget i inmatningsmappningenX Det finns inget i kommandomappningenX %s tecknet kan inte mappas omX "%s" är inte ommappat just nuX Namn på markeringar måste vara ett tecken långaX %s finns, inget sparat; använd ! för att sparaX Ny exrc fil: %sX Målraden ligger inne i området som ska flyttasX Open kommandot kräver att open flaggan är sattX Open kommandot är inte implementerat ännuX Säkerhetskopiering av filen är inte möjligtX Filen säkerhetskopieradX %s expanderade till för många filnamnX Endast vanliga filer och namngivna rör kan läsasX %s: läslåset är otillgängligtX Läser...X %s: %lu rader, %lu teckenX Inga bakgrundsfönster att visaX Script kommandot finns bara i "vi" lägeX Inget kommando att exekveraX shiftwidth flaggan satt till 0X Talet har för stort värdeX Talet har för litet värdeX Reguljärt uttryck är givet; r flaggan är meningslösX #, l och p flaggorna kan inte kombineras med c flaggan i "vi" lägeX Ingen matchande text funnenX Inget tidigare märke har givitsX Det är färre än %s märken i stacken; använd :display t[ags]X Det finns ingen fil %s i märkesstacken; använd :display t[ags]X Tryck Enter för att fortsätta: X %s: märke inte funnetX %s: korrupt märke i %sX %s: märkets radnummer är bortom filslutetX Märkesstacken är tomX %s: söksträngen inte funnenX %d filer till att editeraX Buffert %s är tomX Bekräfta ändring? [n]X AvbrutenX Ingen tidigare buffert att exekveraX Inget tidigare reguljärt uttryckX %s kommandot kräver att en fil redan lästs inX Användning: %sX Visual kommandot kräver att open flaggan är sattX Tom filX Ingen tidigare F, f, T eller t sökningX %s inte funnenX Ingen tidigare fil att editeraX Markören är inte i ett talX Det resulterande talet är för stortX Det resulterande talet är för litetX Inget matchande tecken på denna radX Matchande tecken inte funnetX Det finns inga tecken att ersättaX Det finns inget fönster att byta tillX Tecken efter söksträng, radoffset och/eller z kommandotX Ingen tidigare söksträngX Sökningen slog runt till ursprungliga positionenX Förkortning överskred expanderingsgränsen: tecken har tagits bortX Ogiltigt tecken; använd "quote" för att sätta inX Redan i början på insättningenX Inga fler tecken att ta bortX Försök att gå bortom slutet på filenX Försök att gå bortom slutet på radenX Ingen förflyttning gjordX Redan i början på filenX Försök att gå före början på filenX Redan i första kolumnenX Buffertar måste anges före kommandotX Redan i slutet av filenX Redan på slutet av radenX %s är inte ett "vi" kommandoX Användning: %sX Inga tecken att ta bortX Q kommandot kräver "ex" i terminallägeX Inget kommando att repeteraX Filen är tomX %s kan inte användas som ett förflyttningskommandoX Redan i kommando lägeX Markören är inte i ett ordX Windows flaggans värde är för stor, största värde är %uX Lägg tillX ÄndraX KommandoX Sätt inX ErsättX Förflyttning bortom fönsterslutX Förflyttning till före fönstrets börjanX Fönstret måste vara större än %d rader för delningX Det finns inga fönster i bakgrundenX Det finns inget fönster i bakgrunden som editerar filen %sX Du får inte sätta ditt enda synliga fönster i bakgrundenX Fönstret kan bara krympa till %d raderX Fönstret kan inte krympaX Fönstret kan inte växaX Detta fönster kan inte pausasX Avbrutet: omdefinierade tangenter ignoreradeX vi: temporärbuffertar inte frisläpptaX Denna terminal har ingen %s tangentX Endast en buffert kan angesX Talet är större än %luX AvbrutetX Kan inte skapa temporär filX Warning: %s är inte en normal filX %s är redan låst, detta blir en icke skrivbar sessionX %s: ta bortX %s: stängX %s: ta bortX %s: ta bortX Ej skrivbar fil, filen inte sparad; använd ! för att skriva överX Ej skrivbar fil, filen inte sparadX %s finns, ej sparad; använd ! för att utföra operationenX %s finns, filen inte sparadX Ofullständig fil, filen inte sparad, använd ! för att skriva överX Ofullständig fil, filen inte sparadX %s: filen ändrad efter denna kopia togs; använd ! för att utföra operationenX %s: filen ändrad efter denna kopia togsX %s: skrivlåset är otillgängligtX Skriver...X %s: VARNING: FILEN TRUNKERADX Redan vid första märket i denna gruppX %s: ny fil: %lu rader, %lu teckenX %s: %lu rader, %lu teckenX %s expanderade till för många filnamnX %s är inte en normal filX %s ägs inte av digX %s är åtkomstbar av andra än ägarenX Filen har ändrats efter den sparats; spara eller använd !X Filen har ändrats efter den sparats; spara eller använd :edit!X Filen har ändrats efter den sparats; spara eller använd !X Filen är temporär; exit kastar bort ändringarnaX Ej skrivbar fil, ändringar har inte automatsparatsX Loggningen startar omX bekräfta? [ynq]X Tryck på en tangent för att fortsätta: X Tryck på en tangent för att fortsätta [: för att ge fler kommandon]: X Tryck på en tangent för att fortsätta [q för att avsluta]: X Den formen av %s kräver "ex" i terminallägeX Går till "ex" inmatningsläge.X Kommandot misslyckades, ingen fil inläst ännu.X forts?X Oväntad teckenhändelseX Oväntad filslutshändelseX Sökningen hittade ingentingX Oväntad avbrottshändelseX Oväntad avslutningshändelseX Oväntad omritningshändelseX Redan vid sista märket i denna gruppX %s kommandot kräver "ex" i terminallägeX Den formen av %s är inte tillgänglig när secure edit flaggan är sattX Oväntad stränghändelseX Oväntad tidshändelseX Oväntad skrivhändelseX Skalexpansion är inte tillgänglig när secure edit flaggan är sattX %s kommandot är inte tillgänglig när secure edit flaggan är sattX set: %s kan inte slås avX Fönstret för litet.X tillagdaX ändradeX borttagnaX ihopsattaX flyttadeX flyttadeX inklistradeX radX raderX Vi har inte länkats med en Tcl tolkX Filen har ändrats efter den sparats.X Skalexpansion misslyckadesX Ingen %s edit flagga givenX Vi har inte länkats med en Perl tolkX Inga "ex" kommandon att exekveraX Tryck för att exekvera kommando, :q för att avslutaX Gör "cscope help" för hjälpX Inga cscope kopplingar körsX %s: okänd söktyp: använd en av %sX %d: ingen sådan cscope sessionX set: %s flaggan får aldrig slås påX set: %s flaggan får aldrig sättas till 0X %s: tillagt: %lu rader, %lu teckenX Oväntad storleksändringX %d filer att editeraX vigor-0.016.orig/catalog/dutch.check0100644000076400007640000000214507103707217016014 0ustar cjw44cjw44Unused message id's (this is okay): 001 047 050 051 052 081 176 213 229 288 ========================= MISSING ERROR MESSAGES (Please add!): ========================= Extra error messages (just delete them): ========================= MESSAGES WITH THE SAME MESSAGE ID's (FIX!): ========================= Duplicate messages, both id and message (this is okay): ========================= Duplicate messages, just message (this is okay): 2 %s bestaat al, niet weggeschreven; gebruik ! om het te forcerenX 2 %s resulteert in te veel bestandsnamenX 2 %s: %lu regels, %lu karaktersX 2 %s: verminkt herstel bestandX 2 Bestand wordt gecopieerd voor herstel...X 2 Buffer %s is leegX 2 Dit is het eerste bestandX 2 Er vindt geen logging plaats, kan wijzigingen niet ongedaan makenX 2 OnderbrokenX 2 Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie misluktX 2 gewijzigdX 2 set: %s optie moet een waarde hebbenX 3 %s: verwijdering misluktX 3 Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forcerenX 4 Gebruik: %sX ========================= vigor-0.016.orig/catalog/dutch.base0100644000076400007640000003140407103707217015651 0ustar cjw44cjw44002 "regel te lang" 003 "kan regel %lu niet verwijderen" 004 "kan niet toevoegen aan regel %lu" 005 "kan niet invoegen vooraan regel %lu" 006 "kan regel %lu niet opslaan" 007 "kan laatste regel niet lezen" 008 "Fout: kan regel %lu niet vinden" 009 "log bestand" 010 "Er vindt geen logging plaats, kan wijzigingen niet ongedaan maken" 011 "geen wijzigingen om ongedaan te maken" 012 "Er vindt geen logging plaats, kan wijzigingen niet ongedaan maken" 013 "Er vindt geen logging plaats, herhaling niet mogelijk" 014 "geen wijzigingen om te herhalen" 015 "%s/%d: schrijven naar log mislukt" 016 "Vi's standaard invoer en uitvoer moeten aan een terminal gekoppeld zijn" 017 "Merk %s: niet gezet" 018 "Merk %s: de regel is verwijderd" 019 "Merk %s: de cursor positie bestaat niet meer" 020 "Fout: " 021 "nieuw bestand" 022 "naam veranderd" 023 "gewijzigd" 024 "ongewijzigd" 025 "NIET BEVEILIGD" 026 "niet schrijfbaar" 027 "regel %lu uit %lu [%ld%%]" 028 "leeg bestand" 029 "regel %lu" 030 "Het bestand %s is geen message catalog" 031 "Niet in staat om de standaard %s optie in te stellen" 032 "Gebruik: %s" 033 "set: optie %s onbekend: 'set all' laat alle opties zien" 034 "set: [no]%s optie kan geen waarde hebben" 035 "set: %s optie moet een waarde hebben" 036 "set: %s optie: %s" 037 "set: %s optie: %s: getal is te groot" 038 "set: %s optie: %s is een ongeldige waarde" 039 "set: %s optie moet een waarde hebben" 040 "Te weinig kolommen op het scherm, minder dan %d" 041 "Aantal kolommen te groot, meer dan %d" 042 "Te weinig regels op het scherm, minder dan %d" 043 "Aantal regels te groot, meer dan %d" 044 "De lisp optie is niet ondersteund" 045 "messages niet uitgeschakeld: %s" 046 "messages niet geactiveerd: %s" 048 "De paragraph optie moet karakter paren bevatten" 049 "De section optie moet karakter paren bevatten" 053 "De standaard buffer is leeg" 054 "Buffer %s is leeg" 055 "Bestanden met newlines in de naam kunnen niet hersteld worden" 056 "Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie mislukt" 057 "Bestand wordt gecopieerd voor herstel..." 058 "Herstel mechanisme werkt niet: %s" 059 "Wijzigingen kunnen niet ongedaan gemaakt worden als deze sessie mislukt" 060 "Kon bestand niet veilig stellen: %s" 061 "Bestand wordt gecopieerd voor herstel..." 062 "Informatie met betrekking tot gebruiker nummer %u niet gevonden" 063 "Kan herstel bestand niet beveiligen" 064 "herstel buffer overgelopen" 065 "herstel bestand" 066 "%s: verminkt herstel bestand" 067 "%s: verminkt herstel bestand" 068 "U heeft geen bestand genaamd %s te herstellen" 069 "U kan eerdere versies van dit bestand herstellen" 070 "U kan nog meer bestanden herstellen" 071 "kan geen email versturen: %s" 072 "Bestand leeg; niets om te doorzoeken" 073 "Einde van het bestand bereikt zonder dat het patroon gevonden is" 074 "Geen vorig zoek patroon" 075 "Patroon niet gevonden" 076 "Begin van het bestand bereikt zonder dat het patroon gevonden is" 077 "Zoek-operatie omgeslagen" 078 "Bezig met zoeken..." 079 "Geen niet-printbaar karakter gevonden" 080 "Onbekend commando" 082 "Commando niet beschikbaar in ex mode" 083 "Aantal mag niet nul zijn" 084 "%s: ongeldige regel aanduiding" 085 "Interne fout in syntax tabel (%s: %s)" 086 "Gebruik: %s" 087 "%s: tijdelijke buffer niet vrijgegeven" 088 "Vlag offset voor regel 1" 089 "Vlag offset voorbij bestands einde" 090 "bestand/scherm veranderd tijdens uitvoeren van @ in een blok" 091 "bestand/scherm veranderd tijdens uitvoeren van globaal/v commando" 092 "Ex commando mislukt: rest van commando(s) genegeerd" 093 "Ex commando mislukt: gemappede toetsen genegeerd" 094 "Het tweede adres is kleiner dan het eerste" 095 "Geen merk naam opgegeven" 096 "\\ niet gevolgd door / of ?" 097 "Referentie aan een regel nummer kleiner dan 0" 098 "Het %s commando is onbekend" 099 "Adres waarde te groot" 100 "Adres waarde te klein" 101 "Ongeldige adres combinatie" 102 "Ongeldig adres: slechts %lu regels in het bestand aanwezig" 103 "Ongeldig adres: het bestand is leeg" 104 "Het %s commando staat het adres 0 niet toe" 105 "Geen afkortingen om weer te geven" 106 "Afkortingen moeten eindigen met een "woord" letter" 107 "Afkortingen mogen geen tabulaties of spaties bevatten" 108 "Afkortingen mogen geen woord/niet-woord karakters mengen, behalve aan het einde" 109 ""%s" is geen afkorting" 110 "Vi commando mislukt: gemappede toetsen genegeerd" 111 "Dit is het laatste bestand" 112 "Dit is het eerste bestand" 113 "Dit is het eerste bestand" 114 "lijst met bestanden is leeg" 115 "Geen voorgaand commando om "!" te vervangen" 116 "Geen bestandsnaam voor %%" 117 "Geen bestandsnaam voor #" 118 "Fout: execl: %s" 119 "I/O fout: %s" 120 "Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forceren" 121 "Kan uw home directory niet vinden" 122 "Nieuwe huidige directory: %s" 123 "Geen cut buffers aanwezig" 124 "Het %s commando kan niet gebruikt worden in een globaal of v commando" 125 "%s/%s: niet gelezen: noch U noch root is de eigenaar" 126 "%s/%s: niet gelezen: U bent niet de eigenaar" 127 "%s/%s: niet gelezen: kan gewijzigd worden door andere gebruikers" 128 "%s: niet gelezen: noch U noch root is de eigenaar"" 129 "%s: niet gelezen: U bent niet de eigenaar" 130 "%s: niet gelezen: kan gewijzigd worden door andere gebruikers" 131 "Geen volgende regel om samen te voegen" 132 "Geen input map entries" 133 "Geen command map entries" 134 "Het %s karakter kan niet ge-remapped worden" 135 ""%s" is niet gemapped" 136 "Merk naam moet een enkel karakter zijn" 137 "%s bestaat al, niet weggeschreven; gebruik ! om het te forceren" 138 "Nieuw .exrc bestand: %s. " 139 "doel regel ligt in het blok" 140 "Het open commando vereist dat de open optie actief is" 141 "Het open commando is nog niet ondersteund" 142 "Kan dit bestand niet veilig stellen" 143 "Bestand veilig gesteld" 144 "%s resulteert in te veel bestandsnamen" 145 "Alleen echte bestanden en named pipes kunnen gelezen worden" 146 "%s: lees beveiliging niet beschikbaar" 147 "Bezig met lezen..." 148 "%s: %lu regels, %lu karakters" 149 "Geen achtergrond schermen aanwezig" 150 "Het script commando is alleen beschikbaar in vi mode" 151 "Geen comando om uit te voeren" 152 "shiftwidth optie op 0 gezet" 153 "Count te groot" 154 "Count te klein" 155 "Reguliere expressie opgegeven; r vlag heeft geen betekenis" 156 "De #, l en p vlaggen kunnen niet gecombineerd worden met de c vlag in vi mode" 157 "Geen match gevonden" 158 "Geen voorafgaande tag aanwezig" 159 "Minder dan %s elementen op de tags stapel; gebruik :display t[ags]" 160 "Geen bestand genaamd %s op de tags stapel; gebruik :display t[ags]" 161 "Kies Enter om door te gaan: " 162 "%s: tag niet gevonden" 163 "%s: verminkte tag in %s" 164 "%s: Het regel nummer van deze tag is voorbij het einde van het bestand" 165 "De tags stapel is leeg" 166 "%s: zoek patroon niet gevonden" 167 "%d andere bestanden te wijzigen" 168 "Buffer %s is leeg" 169 "Bevestig wijziging? [n]" 170 "Onderbroken" 171 "Geen voorafgaande buffer om uit te voeren" 172 "Geen vorige reguliere expressie" 173 "Het %s commando vereist dat er een bestand geladen is" 174 "Gebruik: %s" 175 "Het visual commando vereist dat de open optie actief is" 177 "Leeg bestand" 178 "Geen voorafgaand F, f, T of t zoek commando" 179 "%s niet gevonden" 180 "Geen voorafgaand bestand te bewerken" 181 "Cursor niet op een getal" 182 "Getal wordt te groot" 183 "Getal wordt te klein" 184 "Geen overeenkomstig karakter op deze regel" 185 "Overeenkomstig karakter niet gevonden" 186 "Geen karakters te vervangen" 187 "Geen ander scherm aanwezig" 188 "Karakters achter het zoek patroon, de regel offset, en/of het z commando" 189 "Geen voorafgaand zoek patroon" 190 "Zoekopdracht na omslag teruggekeerd op originele positie" 191 "Afkorting overschrijdt expansie limiet: karakters genegeerd" 192 "Ongeldig karakter; quote to enter" 193 "Reeds aan het begin van de invoer" 194 "Niet meer karakters te verwijderen" 195 "Verplaatsing voorbij het einde van het bestand" 196 "Verplaatsing voorbij het einde van de regel" 197 "Cursor niet verplaatst" 198 "Reeds aan het begin van het bestand" 199 "Verplaatsing voorbij het begin van het bestand" 200 "Reeds in de eerste kolom" 201 "Buffers moeten voor het commando opgegeven worden" 202 "Reeds bij het einde van het bestand" 203 "Reeds bij het einde van de regel" 204 "%s is geen vi commando" 205 "Gebruik: %s" 206 "Geen karakters te verwijderen" 207 "Het Q commando vereist de ex terminal interface" 208 "Geen commando om te herhalen" 209 "Het bestand is leeg" 210 "%s mag niet gebruikt worden als een verplaatsings commando" 211 "Al in commando mode" 212 "Cursor niet in een woord" 214 "Windows optie waarde is te groot, maximum is %u" 215 "Toevoegen" 216 "Veranderen" 217 "Commando" 218 "Invoegen" 219 "Vervangen" 220 "Verplaatsing voorbij het eind van het scherm" 221 "Verplaatsing voorbij het begin van het scherm" 222 "Scherm moet meer dan %d regels hebben om het te kunnen splitsen" 223 "Er zijn geen achtergrond schermen" 224 "Er is geen achtergrond scherm waarin U bestand %s aan het bewerken bent" 225 "U kan uw enige scherm niet in de achtergrond zetten" 226 "Het scherm kan slechts verkleind worden tot %d regels" 227 "Het scherm kan niet kleiner" 228 "Het scherm kan niet groter" 230 "Dit scherm kan niet gesuspend worden" 231 "Onderbroken: gemappede toetsen genegeerd" 232 "vi: tijdelijke buffer niet vrijgegeven" 233 "Deze terminal heeft geen %s toets" 234 "Er kan slechts een buffer opgegeven worden" 235 "Getal groter dan %lu" 236 "Onderbroken" 237 "Aanmaken van tijdelijk bestand is mislukt" 238 "Waarschuwing: %s is geen regulier bestand" 239 "%s is al geopend, bestand is in deze sessie niet schrijfbaar" 240 "%s: verwijdering mislukt" 241 "%s: sluiting mislukt" 242 "%s: verwijdering mislukt" 243 "%s: verwijdering mislukt" 244 "Bestand niet schrijfbaar, niet weggeschreven; gebruik ! om het te forceren" 245 "Bestand niet schrijfbaar, niet weggeschreven" 246 "%s bestaat al, niet weggeschreven; gebruik ! om het te forceren" 247 "%s bestaat al, niet weggeschreven" 248 "Gebruik ! om een incompleet bestand weg te schrijven" 249 "Bestand incompleet, niet weggeschreven" 250 "%s: bestand op disk nieuwer dan deze versie; gebruik ! om het te forceren" 251 "%s: bestand op disk nieuwer dan deze versie" 252 "%s: schrijf beveiliging niet beschikbaar" 253 "Bezig met schrijven..." 254 "%s: WAARSCHUWING: BESTAND INCOMPLEET" 255 "Reeds op de eerste tag van deze groep" 256 "%s: nieuw bestand: %lu regels, %lu karakters" 257 "%s: %lu regels, %lu karakters" 258 "%s resulteert in te veel bestandsnamen" 259 "%s: geen normaal bestand" 260 "%s: U bent niet de eigenaar" 261 "%s: kan gewijzigd worden door andere gebruikers" 262 "Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forceren" 263 "Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik :edit! om het te forceren" 264 "Bestand gewijzigd sinds laatste schrijfactie; schrijf het weg of gebruik ! om het te forceren" 265 "Tijdelijk bestand; exit negeert wijzigingen" 266 "Bestand niet schrijfbaar, wijzigingen niet automatisch weggeschreven" 267 "log opnieuw gestart" 268 "Bevestig? [ynq]" 269 "Druk op een toets om door te gaan: " 270 "Druk op een toets om door te gaan [: voor meer ex commandos]: " 271 "Druk op een toets om door te gaan [q om te stoppen]: " 272 "Deze vorm van %s vereist de ex terminal interface" 273 "Entering ex input mode." 274 "Commando mislukt, nog geen bestand geladen." 275 " doorgaan?" 276 "Onverwacht character event" 277 "Onverwacht end-of-file event" 278 "Geen match gevonden voor dit patroon" 279 "Onverwacht interrupt event" 280 "Onverwacht quit event" 281 "Onverwacht repaint event" 282 "Reeds op de laatste tag van deze groep" 283 "Het %s command vereist de ex terminal interface" 284 "Deze vorm van %s is niet ondersteund als de secure edit optie actief is" 285 "Onverwacht string event" 286 "Onverwacht timeout event" 287 "Onverwacht write event" 289 "Shell expansies zijn niet ondersteund als de secure edit optie actief is" 290 "Het %s commando is niet ondersteund als de secure edit optie actief is" 291 "set: %s mag niet uitgezet worden" 292 "Scherm te klein." 293 "toegevoegd" 294 "gewijzigd" 295 "verwijderd" 296 "samengevoegd" 297 "verplaatst" 298 "verschoven" 299 "gebufferd" 300 "regel" 301 "regels" 302 "Vi was niet geladen met een Tcl interpreter" 303 "Bestand gewijzigd sinds het de laatste keer weg is geschreven." 304 "Shell expansie mislukt" 305 "Geen %s edit optie opgegeven" 306 "Vi was niet geladen met een Perl interpreter" 307 "Geen ex commando om uit te voeren" 308 "Kies om commando uit te voeren, :q om te stoppen" 309 "Gebruik "cscope help" voor uitleg" 310 "Nog geen cscope connectie aanwezig" 311 "%s: onbekend zoek type: gebruik een van %s" 312 "%d: onbekende cscope sessie" 313 "set: de %s optie mag nooit aangezet worden" 314 "set: de %s optie mag nooit op 0 gezet worden" 315 "%s: toegevoegd: %lu regels, %lu karakters" 316 "Onverwacht resize event" 317 "%d bestanden te wijzigen" vigor-0.016.orig/catalog/ru_SU.KOI8-R.base0100644000076400007640000002205107103707217016505 0ustar cjw44cjw44002 "pEREPOLNENIE ZNA^ENIQ DLINY STROKI" 003 "%s/%d: NEWOZMOVNO UDALITX STROKU %u" 004 "%s/%d: NEWOZMOVNO DOBAWITX K STROKE %u" 005 "%s/%d: NEWOZMOVNO WSTAWITX W STROKU %u" 006 "%s/%d: NEWOZMOVNO SOHRANITX STROKU %u" 007 "%s/%d: NEWOZMOVNO DOSTATX POSLEDN@@ STROKU" 009 "fAJL ZAPISEJ" 010 "zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDU" 011 "nET IZMENENIJ DLQ OTMENY" 012 "zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDU" 013 "zAPISI NE WELISX, NEWOZMOVNO PROSMOTRETX WPERED" 014 "nET IZMENENIJ DLQ PEREDELKI" 015 "%s/%d: O[IBKA PRI ZAPISI PROTOKOLA" 016 "sTANDARTNYJ WWOD/WYWOD DLQ VI DOLVEN BYTX TERMINAL" 017 "oTMETKA %s: NE USTANOWLENA" 018 "oTMETKA %s: STROKA BYLA UDALENA" 019 "oTMETKA %s: POZICII KURSORA BOLX[E NE SU]ESTWUET" 020 "o[IBKA:" 030 "fAJL %s NE QWLQETSQ KATALOGOM SOOB]ENIJ" 031 "nEWOZMOVNO USTANOWITX OPCI@ %s PO UMOL^ANI@" 032 "iSPOLXZOWANIE: %s" 033 "oPCII %s NET: 'set all' POKAZYWAET WSE WOZMOVNYE OPCII" 034 "set: [no]%s NE PRINIMAET TAKOGO ZNA^ENIQ" 035 "set: %s OPCIQ NE QWLQETSQ DWOI^NOJ" 038 "set: NEPRAWILXNOE ZNA^ENIE %s" 039 "set: %s OPCIQ NE QWLQETSQ DWOI^NOJ" 040 "kOLI^ESTWO KOLONOK \KRANA SLI[KOM MALO, MENX[E ^EM %d" 041 "kOLI^ESTWO KOLONOK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %d" 042 "kOLI^ESTWO STROK \KRANA SLI[KOM MALO, MENX[E ^EM %d" 043 "kOLI^ESTWO STROK \KRANA SLI[KOM WELIKO, BOLX[E ^EM %d" 044 "oPCIQ lisp OTSUTSTWUET" 045 "sOOB]ENIQ NE WYKL@^ENY: %s" 046 "sOOB]ENIQ NE WKL@^ENY: %s" 047 "oPCIQ modeline(s) NE MOVET BYTX PEREUSTANOWLENA" 048 "oPCIQ paragraph DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMI" 049 "oPCIQ section DOLVNA SOSTOQTX IZ GRUPP S DWUMQ SIMWOLAMI" 050 "oPCIQ shiftwidth NE MOVET BYTX USTANOWLENA NA 0" 051 "oPCIQ sourceany NE MOVET BYTX USTANOWLENA" 052 "tABULQCIQ NE MOVET BYTX USTANOWLENA NA 0" 053 "sTARTOWYJ BUFER PUST" 054 "bUFER %s PUST" 055 "fAJLY S SIMWOLAMI PEREWODA STROKI W IMENI NE MOGUT BYTX WOSSTANOWLENY" 056 "iZMENENIQ NE SOHRANENY PRI KRAHE SESSII" 058 "sOHRANENIE NE UDALOSX: %s" 059 "iZMENENIQ NE SOHRANQ@TSQ PRI OBRYWE SESSII" 060 "sOHRANENIE KOPII FAJLA NE UDALOSX: %s" 062 "iNFORMACII NA POLXZOWATELQ %u NE NAJDENO" 063 "nEWOZMOVNO ZA]ITITX SPASENNYJ FAJL" 064 "bUFER WOSSTANOWLENNOGO FAJLA PEREPOLNEN" 065 "wOSSTANOWLENNYJ FAJL" 066 "%s: NE DO KONCA WOSSTANOWLENNYJ FAJL" 067 "%s: NE DO KONCA WOSSTANOWLENNYJ FAJL" 068 "fAJLOW S IMENEM %s, KOTORYE wY MOVETE ^ITATX, NE SU]ESTWUET" 069 "eSTX STARYE WERSII FAJLA, KOTORYE MOVNO WOSSTANOWITX" 070 "sU]ESTWU@T DRUGIE FAJLY, KOTORYE MOVNO WOSSTANOWITX" 071 "E-mail NE POSLAN: %s" 072 "fAJL PUST - ISKATX NE^EGO" 073 "dOSTIGNUT KONEC FAJLA BEZ NAHOVDENIQ OBRAZCA POISKA" 074 "nE ZADAN OBRAZEC POISKA" 075 "oBRAZEC POISKA NE NAJDEN" 076 "dOSTUPNO NA^ALO FAJLA BEZ NAHOVDENIQ OBRAZCA POISKA" 077 "pOISK ZACIKLEN" 079 "nEPE^ATNYH SIMWOLOW NE NAJDENO" 080 "nEIZWESTNAQ KOMANDA" 082 "kOMANDA NE DOSTUPNA W REVIME ex" 083 "s^ET^IK NE MOVET BYTX NULEM" 084 "%s: NEPRAWILXNOE UKAZANIE STROKI" 085 "wNUTRENNQQ O[IBKA W SINTAKSISE (%s: %s)" 086 "iSPOLXZOWANIE: %s" 087 "%s: WREMENNYJ BUFER NE ISPOLXZOWAN" 088 "mETKA POSTAWLENA PERED STROKOJ 1" 089 "mETKA POSTAWLENA POSLE KONCA FAJLA" 092 "kOMANDA ex NE UDALASX: PARAMETRY KOMANDY ZABYTY" 094 "wTOROJ ADRES MENX[E ^EM PERWYJ" 095 "nE UKAZANO NAZWANIE OTMETKI" 096 "\\ NE ZAWER[AETSQ / ILI ?" 097 "sSYLKA K STROKE S NOMEROM MENX[E 0" 098 "kOMANDA %s NEIZWESTNA" 099 "pEREPOLNENIE ZNA^ENIQ ADRESA" 100 "nEDOBOR ZNA^ENIQ ADRESA" 101 "nEDOPUSTIMAQ KOMBINACIQ W ADRESE" 102 "nEPRAWILXNYJ ADRES: WSEGO %lu STROK W FAJLE" 103 "nEPRAWILXNYJ ADRES: FAJL PUST" 104 "kOMMANDA %s NE MOVET ISPOLXZOWATX ADRES 0" 105 "aBBREWIATURY OTSUTSTWU@T" 106 "aBBREWIATURY DOLVNY ZAKAN^IWATXSQ SIMWOLOM "word"" 107 "aBBREWIATURY NE MOGUT SODERVATX SIMWOLOY TABLQCII ILI PROBELY" 108 "aBBREWIATURY NE MOGUT SO^ETATXSQ S SIMWOLAMI SLOW/NE-SLOW, ZA ISKL@^ENIEM KONCA STROKI" 109 ""%s" NE QWLQETSQ ABBREWIATUROJ" 111 "fAJLOW DLQ REDAKTIROWANIQ BOLX[E NET" 112 "oTSUTSTWIE PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQ" 113 "oTSUTSTWIE PREDYDU]EGO FAJLA DLQ PROSMOTRA NAZAD" 114 "nET FAJLOW" 115 "oTSUTSTWIE PREDYDU]EJ KOMANDY DLQ ZAMENY "!"" 116 "oTSUTSTWIE ZAMENY DLQ %%" 117 "oTSUTSTWIE ZAMENY DLQ #" 118 "o[IBKA: execl: %s" 119 "o[IBKA WWODA/WYWODA: %s" 120 "fAJL IZMENEN S MOMENTA POSLEDNEJ POLNOJ ZAPISI: ISPOLXZUJTE ! DLQ OBHODA" 121 "nEWOZMOVNO NAJTI DOMA[NIJ KATALOG" 122 "nOWYJ KATALOG: %s" 123 "nET WYREZANYH BUFEROW" 124 "kOMANDA %s NE MOVET BYTX ISPOLXZOWANA WNUTRI OB]EJ KOMANDY" 125 "%s/%s: NE OTKRYT: NE PRINADLEVIT wAM ILI root-U" 126 "%s/%s: NE OTKRYT: NE PRINADLEVIT wAM" 127 "%s/%s: NE OTKRYT: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEM" 128 "%s/%s: NE S^ITAN: NE PRINADLEVIT wAM ILI root-U" 129 "%s/%s: NE S^ITAN: NE PRINADLEVIT wAM" 130 "%s/%s: NE S^ITAN: WOZMOVNOSTX ZAPISI U POLXZOWATELQ, NE QWLQ@]EGOSQ WLADELXCEM" 131 "pOSLEDU@]IE STROKI OTSUTSTWU@T" 132 "oTSUTSTWIE PARAMETROW WWODA" 133 "oTSUTSTWIE PARAMETROW KOMANDY" 134 "sIMWOL %s NE MOVET BYTX PEREZAPOMNEN" 135 ""%s" NA DANNYJ MOMENT NE OTME^EN" 136 "iMQ METKI DOLVNO BYTX ODNIM SIMWOLOM" 137 "%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODA" 138 "nOWYJ FAJL .exrc: %s" 139 "sTROKA PERENOSA NAHODITSQ WNUTRI PARAMETROW PERENOSA" 140 "kOMANDA open PODRAZUMEWAET USTANOWKU OPCII open" 141 "kOMANDA open NE REALIZOWANA" 142 "zA]ITA FAJLA NEWOZMOVNA" 143 "fAJL ZA]I]EN" 144 "%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOW" 146 "%s: ZA]ITA NA ^TENIE BYLA NEDOSTUPNA" 148 "%s: %lu STROK, %lu SIMWOLOW" 149 "nET TENEWYH OKON" 150 "kOMANDA script ISPOLXZUETSQ TOLXKO W REVIME vi" 151 "nET KOMANDY DLQ ISPOLNENIQ" 152 "oPCIQ shiftwidth USTANOWLENA NA 0" 153 "pEREPOLNENIE S^ET^IKA" 154 "cIKL WYPOLNEN NE DO KONCA" 155 "uKAZANO REGULQRNOE WYRAVENIE: FLAG r NE NUVEN" 156 "fLAGI #, l I p NE MOGUT BYTX OB_EDINENY S FLAGOM c W REVIME vi" 157 "sOWPADENIJ NET" 158 "mETKA OTSUTSTWUET" 159 "w STEKE METOK ZAPISEJ MENX[E, ^EM %s, ISPOLXZUJTE :display t[ags]" 160 "fAJLA S IMENEM %s W STEKE METOK NET; ISPOLXZUJTE :display t[ags]" 162 "%s: METKA NE NAJDENA" 163 "%s: PLOHAQ METKA W %s" 165 "sTEK METOK PUST" 166 "%s: ISKOMAQ PEREMENNAQ NE NAJDENA" 168 "bUFER %s PUST" 170 "pRERWANO" 171 "oTSUTSTWIE BUFERA DLQ ISPOLXZOWANIQ" 172 "nET PREDIDU]EGO REGULQRNOGO WYRAVENIQ" 173 "kOMANDA %s PODRAZUMEWAET NALI^IE PRO^TENNOGO FAJLA" 174 "iSPOLXZOWANIE: %s" 175 "kOMANDA visual PODRAZUMEWAET OBQZATELXNU@ USTANOWKU OPCII open" 176 "%s RAS[IRILSQ DO SLI[KOM BOLX[OGO KOLI^ESTWA FAJLOW" 177 "pUSTOJ FAJL" 178 "nET PREDYDU]EGO POISKA F, f, T, ILI t" 179 "%s NE NAJDENO" 180 "nET PREDYDU]EGO FAJLA DLQ REDAKTIROWANIQ" 181 "kURSOR STOIT NE NA CIFRE" 182 "pOLU^ENNOE ^ISLO SLI[KOM WELIKO" 183 "pOLU^ENNOE ^ISLO SLI[KOM MALO" 184 "pODHODQ]EGO SIMWOLA NET NA \TOJ STROKE" 185 "pODHODQ]IJ SIMWOL NE NAJDEN" 186 "nET SIMWOLOW DLQ UDALENIQ" 187 "dRUGOGO \KRANA NE SU]ESTWUET" 188 "sIMWOLY POSLE STROKI DLQ POISKA I/ILI PEREBOR STROKI" 189 "pRO[LYJ OBRAZEC POISKA OTSUTSTWUET" 190 "pOISK ZAWER[ILSQ NA NA^ALXNOJ POZICII" 192 "sIMWOL NEPRAWILEN; ZAKL@^EN W KAWY^KI DLQ WWODA" 193 "uVE NA NA^ALE WSTAWKI" 194 "nET SIMWOLOW DLQ UDALENIQ" 195 "pEREDWIVENIE ZA KONEC FAJLA" 196 "pEREDWIVENIE ZA KONEC STROKI" 197 "dWIVENIE STROKI NE SDELANO" 198 "uVE NA NA^ALE FAJLA" 199 "dWIVENIE KURSORA ZA NA^ALO FAJLA" 200 "uVE W PERWOJ KOLONKE" 201 "bUFERY DOLVNY BYTX UKAZANY DO WYPOLNENIQ KOMANDY" 202 "uVE NA KONCE FAJLA" 203 "uVE NA KONSE STROKI" 204 "%s NE QWLQETSQ KOMANDOJ VI" 205 "iSPOLXZOWANIE: %s" 206 "nET SIMWOLOW DLQ UDALENIQ" 208 "nET KOMANDY DLQ POWTORA" 210 "kOMANDA %s NE MOVET BYTX ISPOLXZOWANA KAK KOMANDA PRODWIVENIQ" 211 "~ISLO BOLX[E ^EM %lu" 214 "zNA^ENIE KOLI^ESTWA OKON SLI[KOM WELIKO, MAKSIMALXNOE ZNA^ENIE = %u" 220 "dWIVENIE KURSORA ZA KONEC \KRANA" 221 "dWIVENIE KURSORA ZA NA^ALO \KRANA" 223 "tENEWYH OKON NET" 224 "nE SU]ESTWUET TENEWOGO OKNA S REDAKTIROWANIEM FAJLA %s" 225 "wY NE MOVETE SDELATX EDINSTWENNOE OKNO TENEWYM" 226 "|KRAN MOVET BYTX SVAT" 227 "|KRAN NE MOVET BYTX SVAT" 228 "|KRAN NE MOVET BYTX RAS[IREN" 233 "dANNYJ TIP TERMINALA NE IMEET KLAWI[I %s" 237 "nEWOZMOVNO SOZDATX WREMENNYJ FAJL" 238 "wNIMANIE: %s SPECIALXNYJ FAJL" 239 "%s UVE ZABLOKIROWAN, DOSTUPEN TOLXKO NA ^TENIE" 240 "%s: UDALEN" 241 "%s: ZAKRYT" 242 "%s: UDALEN" 243 "%s: UDALEN" 244 "fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN: iSPOLXZUJTE ! DLQ OBHODA" 245 "fAJL TOLXKO DLQ ^TENIQ, NE ZAPISAN" 246 "%s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODA" 247 "%s SU]ESTWUET, NE ZAPISAN" 248 "iSPOLXZUJTE ! DLQ ^ASTI^NOJ ZAPISI FAJLA" 249 "~ASTX FAJLA, FAJL NE ZAPISAN" 250 "%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ: ISPOLXZUJTE ! DLQ OBHODA" 251 "%s: fAJL IZMENQLSQ POZDNEE, ^EM DANNAQ KOPIQ" 252 "%s: ZA]ITA NA ZAPISX BYLA NEDOSTUPNA" 254 "%s: wnimanie: fajl use~en" 256 "%s: NOWYJ FAJL: %lu STROK, %lu SIMWOLOW" 257 "%s: %lu STROK, %lu SIMWOLOW" 258 "%s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOW" 259 "%s SPECIALXNYJ FAJL" 260 "%s: NE PRINADLEVIT wAM" 261 "%s: DOSTUPEN NE TOLXKO wAM" 262 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODA" 263 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE :edit DLQ OBHODA" 264 "fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODA" 265 "fAJL WREMENNYJ: WYHOD SOTRET L@BYE IZMENENIQ" 267 "zAPISI NA^ATY ZANOWO" vigor-0.016.orig/catalog/swedish.owner0100644000076400007640000000005107103707217016422 0ustar cjw44cjw44Jan Djarv vigor-0.016.orig/catalog/dutch.owner0100644000076400007640000000004307103707217016064 0ustar cjw44cjw44J.G. Vons vigor-0.016.orig/catalog/english.owner0100644000076400007640000000004607103707217016411 0ustar cjw44cjw44Keith Bostic vigor-0.016.orig/catalog/german.owner0100644000076400007640000000005307103707217016227 0ustar cjw44cjw44Bernhard Daeubler vigor-0.016.orig/catalog/README0100644000076400007640000001517607103707217014576 0ustar cjw44cjw44# @(#)README 8.4 (Berkeley) 11/22/94 Generally, all non-system error and informational messages in nvi are catalog messages, i.e. they can be tailored to a specific langauge. Command strings, usage strings, system errors and other "known text" are not. It would certainly be possible to internationalize all the text strings in nvi, but it's unclear that it's the right thing to do. First, there's no portable way to do message catalogs. The System V scheme is a reasonable choice, but none of the 4BSD derived systems support it. So, catalogs are completely implemented within nvi, and don't require any library support. Message catalogs in nvi are fairly simple. Every catalog message consists of two parts -- an initial number followed by a pipe (`|') character, followed by the English text for the message. For example: msgq(sp, M_ERR, "001|This is an error message"); would be a typical message. When the msgq() routine is called, if the user has specified a message catalog and the format string (the third argument) has a leading number, then it is converted to a record number, and that record is retrieved from the message catalog and used as a replacement format string. If the record can't be retrieved for any reason, the English text is displayed instead. Each message format string MUST map into the English format string, i.e. it can't display more or different arguments than the English one. For example: msgq(sp, M_ERR, "002|Error: %d %x", arg1, arg2); is a format string that displays two arguments. It is possible, however, to reorder the arguments or to not display all of them. The convention nvi uses is the System V printf(3) convention, i.e. "%[0-9]*$" is the name of a specific, numbered argument. For example: msgq(sp, M_ERR, "002|Error: %2$d %1$x", arg1, arg2); displays the arguments in reverse order. If the system supports this convention in its library printf routines (as specified by the test #define NL_ARGMAX), nvi uses those routines. Otherwise, there is some serious magic going on in common/msg.c to make this all work. Arguments to the msgq function are required to contain ONLY printable characters. No further translation is done by the msgq routine before displaying the message on the screen. For example, in the msgq call: msgq(sp, M_ERR, "003|File: %s", file_name); "file_name" must contain only printable characters. The routine msg_print() returns a printable version of a string in allocated memory. For example: char *p; p = msg_print(sp, file_name); msgq(sp, M_ERR, M("003", "File: %s"), p); FREE_SPACE(sp, p, 0); makes sure that "file_name" is printable before calling the msgq routine. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= The message catalogs themselves are maintained in two files. The first is the "base file" which contains two fields, a record number and the message itself. All base files are named using the convention "vi_.base", e.g. the English one is "vi_english.base". For example: 002 "Unable to create temporary file" 003 "Warning: %s is not a regular file" 004 "%s already locked, session is read-only" 005 "%s: remove" 006 "%s: close" 007 "%s: remove" 008 "%s: remove" 009 "Read-only file, not written; use ! to override" 010 "Read-only file, not written" are the first few lines of the current vi_english.base file. Note that message #1 is missing -- the first message of each catalog is a special one, so that nvi can recognize message catalog files. It's added by the Makefile script that creates the second version of the message catalog. The second file is the file used by nvi to access messages, and is a list of the messages, one per line: VI_MESSAGE_CATALOG Unable to create temporary fileX Warning: %s is not a regular fileX %s already locked, session is read-onlyX %s: removeX %s: closeX %s: removeX %s: removeX Read-only file, not written; use ! to overrideX Read-only file, not writtenX Note that all messages have had a trailing 'X' character appended. This is to provide nvi a place to store a trailing nul for the message so that C library routines that expect one won't be disappointed. These files are named for their language, e.g. "vi_english". The second files are automatically created from the first files. To create a new catalog for nvi: Copy the file vi_english.base to a file that you can modify , e.g. "cp vi_english.base vi_german.base". For each of the messages in the file, replace the message with the string that you want to use. To find out what the arguments to a message are, I'm afraid you'll have to search the source code for the message number. You can find them fairly quickly by doing: cd ..; egrep '123\|' */*.[chys] I'm sorry that there's not an easier way, but I couldn't think of anything that wasn't a lot of work. If, for some reason, you don't have the file vi_english.base, or you have new sources for which you want to create a new base catalog, you can create it by running the command "make english" in the catalog directory. Once you've translated all of the strings, then add your catalog to the "CAT=" line of the Makefile, and run the command "make catalog". This will create the second (and corresponding) file for each file named .base. Don't worry about missing line numbers, i.e. base files that look like: 005 Message number 5. 007 Message number 7. This simply means that a message was deleted during the course of nvi's development. It will be taken care of automatically when you create the second form of the file. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= If you add new messages to the nvi sources, you can check your work by doing "make english; make check". The "make check" target lists unused message numbers, duplicate message numbers, and duplicate messages. Unused message numbers are only useful if you are condensing messages. Duplicate message numbers are a serious problem and have to be fixed. Duplicate messages are only interesting if a message appears often enough that it's worth creating a routine so that the string is only need in a single place. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To select a catalog when running nvi, set the "msgcat" option. If the value of this option ends with a '/', it is treated as the name of a directory that contains a message catalog "vi_XXXX", where XXXX is the value of the LANG environmental variable, if it's set, or the value of the LC_MESSAGES environmental variable if it's not. If neither of those environmental variables are set, or if the option doesn't end in a '/', the option is treated as the full path name of the message catalog to use. If any messages are missing from the catalog, the backup text (English) is used instead. vigor-0.016.orig/catalog/english.check0100644000076400007640000000175207103707217016341 0ustar cjw44cjw44Unused message id's (this is okay): 001 047 050 051 052 081 176 229 288 ========================= MISSING ERROR MESSAGES (Please add!): ========================= Extra error messages (just delete them): ========================= MESSAGES WITH THE SAME MESSAGE ID's (FIX!): ========================= Duplicate messages, both id and message (this is okay): 2 209 "The file is empty" 2 304 "Shell expansion failed" ========================= Duplicate messages, just message (this is okay): 2 %s exists, not written; use ! to overrideX 2 %s: %lu lines, %lu charactersX 2 %s: malformed recovery fileX 2 Buffer %s is emptyX 2 Copying file for recovery...X 2 InterruptedX 2 Logging not being performed, undo not possibleX 2 Modifications not recoverable if the session failsX 2 No previous search patternX 2 set: %s option isn't a booleanX 3 %s: removeX 3 File modified since last complete write; write or use ! to overrideX 4 Usage: %sX ========================= vigor-0.016.orig/catalog/ru_SU.KOI8-R.owner0100644000076400007640000000003307103707217016721 0ustar cjw44cjw44Dima Ruban vigor-0.016.orig/catalog/french.check0100644000076400007640000000175007103707217016153 0ustar cjw44cjw44Unused message id's (this is okay): 001 047 050 051 052 081 176 229 288 ========================= MISSING ERROR MESSAGES (Please add!): ========================= Extra error messages (just delete them): ========================= MESSAGES WITH THE SAME MESSAGE ID's (FIX!): ========================= Duplicate messages, both id and message (this is okay): 2 209 "Le fichier est vide" 2 304 "L'expansion du shell a ‚chou‚" ========================= Duplicate messages, just message (this is okay): 2 %s : Fichier de r‚cup‚ration malform‚X 2 %s: %lu lignes, %lu caractŠresX 2 Aucune connexion n'‚tant effectu‚e, impossible d'annulerX 2 Copie en cours du fichier pour r‚cup‚ration...X 2 D‚finition : l'option %s n'est pas bool‚enneX 2 Impossible de r‚cup‚rer les modifications si la session ‚choueX 2 InterrompuX 2 La recherche est revenue … son point de d‚partX 2 Pas de motif de recherche pr‚c‚dentX 3 %s: supprimerX 4 Utilisation : %sX ========================= vigor-0.016.orig/catalog/german.check0100644000076400007640000000214007103707217016151 0ustar cjw44cjw44Unused message id's (this is okay): 001 047 050 051 052 081 176 213 229 288 ========================= MISSING ERROR MESSAGES (Please add!): ========================= Extra error messages (just delete them): ========================= MESSAGES WITH THE SAME MESSAGE ID's (FIX!): ========================= Duplicate messages, both id and message (this is okay): ========================= Duplicate messages, just message (this is okay): 2 %s existiert, nicht geschrieben; verwende ! zum UeberschreibenX 2 %s wurde in zu viele Dateinamen expandiertX 2 %s: %lu Zeilen, %lu ZeichenX 2 %s: Wiederherstellungsdatei hat falsches FormatX 2 Aenderungen nicht wiederherstellbar falls die Editorsitzung schief gehtX 2 Kein altes SuchmusterX 2 Keine Protokollierung aktiv, rueckgaengig machen nicht moeglichX 2 Puffer %s ist leerX 2 geaendertX 2 kopiere Datei fuer Wiederherstellung ...X 2 set: %s ist keine boolsche OptionX 3 %s: loeschenX 3 Datei wurde seit dem letzten vollstaendigen Schreiben geaendert; schreibe oder verwende ! zum ignorierenX 4 Benutzung: %sX ========================= vigor-0.016.orig/catalog/ru_SU.KOI8-R.check0100644000076400007640000000271307103707217016653 0ustar cjw44cjw44Unused message id's (this is okay): 001 008 021 022 023 024 025 026 027 028 029 036 037 057 061 078 081 090 091 093 110 145 147 161 164 167 169 191 207 209 212 213 215 216 217 218 219 222 229 230 231 232 234 235 236 253 255 266 ========================= MISSING ERROR MESSAGES (Please add!): 008 021 022 023 024 025 026 027 028 029 036 037 057 061 078 090 091 093 110 145 147 161 164 167 169 191 207 209 212 215 216 217 218 219 222 230 231 232 234 235 236 253 255 266 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 ========================= Extra error messages (just delete them): 047 050 051 052 176 ========================= MESSAGES WITH THE SAME MESSAGE ID's (FIX!): ========================= Duplicate messages, both id and message (this is okay): ========================= Duplicate messages, just message (this is okay): 2 %s RAS[IRILSQ W SLI[KOM BOLX[OE KOLI^ESTWO IMEN FAJLOWX 2 %s SU]ESTWUET, NE ZAPISAN; ISPOLXZUJTE ! DLQ OBHODAX 2 %s: %lu STROK, %lu SIMWOLOWX 2 %s: NE DO KONCA WOSSTANOWLENNYJ FAJLX 2 bUFER %s PUSTX 2 fAJL IZMENEN SO WREMENI POSLEDNEJ ZAPISI: SOHRANITE ILI ISPOLXZUJTE ! DLQ OBHODAX 2 set: %s OPCIQ NE QWLQETSQ DWOI^NOJX 2 zAPISI NE WELISX, NEWOZMOVNO OTMENITX POSLEDN@@ KOMANDUX 3 %s: UDALENX 3 nET SIMWOLOW DLQ UDALENIQX 4 iSPOLXZOWANIE: %sX ========================= vigor-0.016.orig/catalog/spanish.check0100644000076400007640000000200107103707217016341 0ustar cjw44cjw44Unused message id's (this is okay): 001 047 050 051 052 081 176 229 288 ========================= MISSING ERROR MESSAGES (Please add!): ========================= Extra error messages (just delete them): ========================= MESSAGES WITH THE SAME MESSAGE ID's (FIX!): ========================= Duplicate messages, both id and message (this is okay): 2 209 "El archivo est  vac¡o" 2 304 "Expansi¢n de shell fracasada" ========================= Duplicate messages, just message (this is okay): 2 %s: %lu l¡neas, %lu caracteresX 2 %s: archivo de recuperaci¢n defectuosoX 2 Copiando archivo para recuperaci¢n...X 2 El buffer %s est  vac¡oX 2 InterrumpidoX 2 Las modificaciones no pueden recuperarse si la sesi¢n fallaX 2 No hay patr¢n anterior de b£squedaX 2 No se realiza log, no se puede deshacerX 2 determinar: opci¢n %s no es booleanoX 3 %s: eliminarX 3 Archivo modificado desde la £ltima escritura completa; escribir o usar ! para alterarX 4 Uso: %sX ========================= vigor-0.016.orig/webpage/0040775000076400007640000000000007103707517013714 5ustar cjw44cjw44vigor-0.016.orig/webpage/screenshots/0040775000076400007640000000000007103707550016251 5ustar cjw44cjw44vigor-0.016.orig/webpage/screenshots/index.html0100664000076400007640000000367407103707220020247 0ustar cjw44cjw44 Vigor Screenshots Vigor: Putting new limits on productivity

Vigor Screenshots

Screenshots from version: 0.008

Vigor runs in a normal console window: your xterm, dtterm, kterm, or whatever your favorite console system is. I also have had a Windows telnet client to a system, and a separate X server running.

Vigor editor in a terminal window Vigor assistant in a separate window

Vigor will, as it feels is necessary, confirm your operations, particularly the more dangerous ones.

Are you sure you want to move left?

It also will occasionally give you useful hints about your Vigor session, and how you may make it more productive.

Don't cry --- it won't help.

Here is a typical Vigor editing session.

A full-screen Vigor shot

Oh, yeah. Watch Vigor carefully; you may get a glimpse of some more sinister plan.

Coram's Screenshots

Coram has created some screenshots on his own; I found them on Freshmeat. Thanks, Coram!
vigor-0.016.orig/webpage/index.html0100644000076400007640000007106607103711142015703 0ustar cjw44cjw44 Vigor Vigor: Putting new limits on productivity

Vigor

Current Version: 0.016

Vigor (pronouced like "Igor", Dr. Frankenstein's assistant), the popular Unix editor vi with the addition of the Vigor Assistant, has arrived.

Recent News

Vigor Training Program Initiated

After seeing the success of similar industry efforts, we at Piquan Software, the developers of Vigor, have initiated a certification and training program to give industry professionals the skills needed to use Vigor most efficiently.

The various levels of training available are as follows:
Certification Level Prerequisites Skills Price
Vigor Evildoer Specialist (VES) - About 90 percent of the Unix industry uses Vigor, or its inferior precursors, so chances are very good that you are one of the many people using Vigor to get your work done. Now you can prove it, and give yourself and your organization a competitive edge. $2000.00 US
Vigor Certified Evildoer (VCE) - The VCE program allows you to demonstrate to your victims that you have the specialized knowledge required to perpetrate evil with particular Vigor features. $2000.00 US
Vigor Certified Evildoer + Internet (VCE + Internet) VCE The VCE + Internet program gives you the skills needed to successfully use and support specific features of Vigor in today's Internet-demanding world. Information on composing spam emails, fly-by-night .com web pages, and other critical Internet tasks for the modern evil dispensation professional, using the Vigor platform, are covered. $3000.00 US
Vigor Certified Evil Scheme Engineer (VCESE) Six VCE certifications obtained within the last one (1) week For evildoing professionals, Piquan Solutions offers the VCESE credential. VCESEs are qualified to plan, implement, maintain, and support plots to take over the world, mind-control schemes, destruction of enemies, and other evil schemes, using the Vigor environment. Study materials will center around "Things To Never Do As An Evil Overloard". Graduates will have access to beta versions of Vigor in a schedule as approved by Piquan Solutions. $5000.00 US
Vigor Certified Trainer (VCT) VCESE VCT's play an important role in Piquan Industries' re-education process. VCTs are qualified instructionally and certified technically personally by Piquan to deliver training to evildoers everywhere. Study materials center around Anthony Burgess and Stanley Kubrick's A Clockwork Orange. $9000.00 US

All certifications include a certificate suitable for framing, an official and individual certification number (while supplies last), and a Vigor Evildoer button to wear at conferences, to let everybody know that you are a certified Vigor Evildoer. VCESEs also receive a secret decoder nose ring.

Since Piquan Enterprises is constantly updating our curriculum and programs based on industry input, all training and certification is on an as-available basis, and is subject to change, cancellation, or expiration without notice. Piquan is not responsible for the conduct of certified Evildoers. Thanks to Garrett Moffitt for the idea.

Vigor Goes Mainstream!

The first mainstream-mag review of Vigor has been released! That's right, Salon, a general-interest magazine, has run a short blurb on Vigor and the chilling implications it could have on the free software movement. Or something.

Vigor Revived

It's been a month and a half since the last release of Vigor. One would think that I'd be willing to leave well enough alone. Well, I'm not. I got a bit of free time, and the LinuxCare review sparked some interest, so I am now getting ideas for future improvements.

As always, bug fixes are my highest priority, but some new features would be nice too. Some of the things I'd like to see in future versions are:

  • Improved graphics. I use XBMs in Vigor because it was the quickest drawing method to implement, and I wanted to get the first release out during the Vigor storyline on User Friendly. Now that I've got some time, I'd like to improve the graphics handler and the artwork.
  • More hooks! More confirmations, more annoying helpful hints (like the ones given when you start insert mode), more random popups, more!
  • More animations! At present, there are precisely two animations (count em!) in Vigor. This is not nearly insideous enough. Naturally, with animations, you lead into...
  • Sound effects (via Network Audio System). This naturally suggests...
  • Speech (via Festival). This isn't that hard to do using Festival's server mode. (Thanks to my coworkers at HP for the idea, the deranged loonies!)
  • Microsoft Windows support. Judging by the feedback I get, people who aren't Unix devotees just don't get the point of Vigor, but strangely enough I've gotten multiple requests to port Vigor to Windows. Well, I suppose I may as well... Kinda one of those "full circle" things.

    This by no means is an exhaustive list. If people send me patches, then I'll add just about anything. These are just some of the things that I might do over the next few weeks, months, whatever.

    About Vigor

    Based on the User Friendly comic strip storyline from 4 January to 14 January, Vigor brings all the features of traditional Unix vi, plus the friendly and helpful Vigor Assistant. (If you aren't familiar with User Friendly the Comic Strip, quit bothering with Vigor and go out and look there first. It's well worth the trip! Don't worry, we'll wait.)

    Enter the world of Vigor! Come, join us, watch the paperclip, don't be afraid... *cough* Sorry, where was I?

    Vigor is based on the open-source nvi program, for which I apologize to the nvi authors. The Vigor assistant was bolted on using the Tcl facility that nvi had, and a bit of my own C code to cope with Tk.

    I'm improving(?) Vigor based on suggestions from the user community. Send ideas, bug reports, and patches to joelh@gnu.org, and watch this page for updates. New versions have been released at a rate ranging from several each evening to once a week, depending on user comments and free time.

    Press Coverage

    I am always suprised when somebody mentions Vigor. I really didn't expect it to spread by word-of-mouth at all, let alone people write about it. Keep telling your friends, your enemies, your coworkers, everybody, about Vigor.

    Particular thanks to Illiad for putting the original release announcement and multiple subsequent announcements in the User Friendly News, not to mention the original inspiration!

    Vigor Review and Interview

    Rado has written a review of Vigor and conducted an interview with me about Vigor. The interview also covers general topics like the free software community, Pitr, and what Sun Tzu teaches us about a certin other paperclip-using company. The full version is availible at LinuxTicker, and if you speak Croatian, look in PC Chip magazine (broj 57, veljaca 2000).

    Vigor Goes Mainstream!

    The first mainstream-mag review of Vigor has been released! That's right, Salon, a general-interest magazine, has run a short blurb on Vigor and the chilling implications it could have on the free software movement. Or something.

    Vigor App of the Week

    LinuxCare's Brett Neely wrote up a short review of Vigor for his App of the Week column.

    User Comments

  • You are a sick, sick person, and I admire that greatly. - Illiad, author of User Friendly
  • AUUUUUGGGGGHHHHHH!!!!! - Keith Bostic, author of nvi
  • I haven't laughed so hard in a long time.- Arnold Robbins, coauthor of Learning the vi Editor
  • Congratulations, Brother Piquan... how diabolically clever of you...- Eric S. Raymond
  • The entire open-source movement is, of course, a Discordian creation.- Amphigoricus the Turgid, K.S.C.
  • Why ? - Sander Nooy
  • I am laughing in an inapropropriate manner for an office building like this... - Nathanael Lierly
  • By reading this message, you have agreed to stand on your head while gargling water and proclaming "Weird Al Yankovic is Lord of the Universe!" - J.J. Ramsey
  • "I am wishink I had Unix system instead of this silly VMSstation so I too could be experiencing pain of vigo directly rather than vicariously!" - Atlant Schmidt
  • The following addresses had permanent fatal errors... - Mailer-Daemon
  • On behalf of evildoers everywhere, I thank you for your heroic efforts in bringing The Assistant to such a long-standing bastion of the opposition. You will be remembered when The Time comes. - Michael Jinks

    Author Comments

  • "I just thought I was writing a weekend hack; I had no idea what I was unleashing!" (Said after noting over 20,000 web page hits.)
  • The way I figure, after you take into account all the victims who have used it, Vigor is single-handedly responsible for immeasurable amounts of lost productivity. In this, I think I have captured the true nature of the original.
  • It's amazing how a weekend hack can take up all your free time for a month.
  • (When asked to confirm that Vigor is not a productivity app:) From its inception, Vigor has been designed to be utterly useless, not to mention a pain to use. While building the interface, I double-checked everything to ensure that I didn't accidently add a useful feature. [Note: See below for an example of how that didn't work.] People have suggested making Vigor useful; my reply is that it would then cease to be Vigor. I'm sure you can think of other examples of popular, yet useless, editors. Besides, I don't even use vi... Who am I to decide how to improve it?

    Revisions

    Vigor was rushed out in order to be released during User Friendly's Vigor storyline. It originally had several bugs, and several unimplemented features. I've been fixing bugs and adding features since the day Vigor was relelased. There are presently no outstanding Vigor bugs that I'm aware of; let me know if you find something!

    There is one remaining problem that we've only seen on two systems: Vigor, when it starts, exits with the message unknown floating-point error, errno = 84. Eivind Tagneth, who first reported this, traced it down to a bug in Tcl, and submitted a patch to the Tcl maintainers.

    Even if you're not seeing bugs, it's good to hear how much success/failure people are having on different platforms. Let me know how things work for you!

    Version 0.016 (May 2 19:36)
    Enable
    Version 0.015 (Mar 25 15:17)
    Disable by default built-in curses, db, and re libraries. Most OS's these days have proper libraries for these, and I was seeing conflicts (particularly on SuSE under Vigor 0.014). This may break things on some other OS's, probably older ones. If so, try using --enable-curses --enable-db --enable-re on the command line.
    Version 0.014 (Feb 8 14:50)
    Remove the hack to the EULA that produced the Jumping Vigor Bug.
    Version 0.013 (Feb 5 11:53)
    Fix to configure.in: it looked for Tcl on Debian systems when it was supposed to look for Tk.
    Version 0.012 (Feb 4 00:28)
    Updated EULA, made dialog box move along with assistant
    Version 0.011 (Feb 2 00:10)
    Look for libtcl8.2 etc (as opposed to libtcl82 etc); handle select() calls prior to assistant initialization
    Version 0.010 (Jan 19 23:16)
    Modified EULA, changed fractional cm screen specs to pixel counts, use libtcl82 if found, look for uint8_t etc
    Version 0.009 (Jan 18 15:11)
    Improved Tcl/Tk detection, added EULA, detect -ldl
    Version 0.008 (Jan 17 21:20)
    Added new comments, touched up comment probabilities, made sure that comments don't overlap with animations, modified configure.in to look for libtcl80.a
    Version 0.007 (Jan 17 12:25)
    Fixed make install to install vigor instead of vi
    Version 0.006 (Jan 16 12:42)
    Further touch-up of "confirm" dialog's probabilities; rename executable to vigor
    Version 0.005 (Jan 16 01:01)
    Fixed make install; write Tk error messages to stderr before vi initializes the screen
    Version 0.004 (Jan 16 00:21)
    Updated configure to match configure.in (oops!)
    Version 0.003 (Jan 15 23:45)
    Added random quotes and animations; compiled vigor.tcl into executable
    Version 0.002 (Jan 15 20:16)
    Updated graphics; touched-up "confirm" dialog
    Version 0.001 (Jan 14 01:05)
    Initial release
    Vigor assistant

    Screenshots, Graphics, and Other Goodies

    The most frequent request I've had since releasing Vigor recently is for screenshots. I've made a separate page with a few for those who don't have the time or tools to compile Vigor; enjoy!

    Tom Mulder created the Vigor logo at the top of the page, and the logo on the screenshots page as well. Thanks, Tom!

    And, if you just can't get enough paperclip action (you sick puppy you), svo (aka Viacheslav Slavinsky) has created a brief Vigor MPEG, an excellent bit of artwork. For those who can't see view MPEGs, he has also created some stills: still 1 and still 2. Yay, svo!

    Downloading Vigor

    Source tarball (0.016)

    Get the source at http://www.red-bean.com:8080/vigor-0.016.tar.gz and have fun with it! You may want to read over the section "Installing Vigor" below, though. I release by source tarball, so this is usually the most up-to-date version. It's also the only one that I can help with install problems on, since I am not generally familiar with the other formats.

    Debian (0.014)

    Colin Watson has made an unofficial package of Vigor for Debian 2.2. He's graciously providing both the diffs and a i386 binary package. (Later versions may also be available; check his dist site.)

    FreeBSD (0.014 at last check)

    There is now a Vigor port in the 4.0-current port tree. I use FreeBSD myself, but I'm not the one responsible for the port (and I don't have commit privs), so it may fall out-of-date without my knowing it. Thanks to Bill Fumerola for committing this! (And I had been told that Vigor should be committed...)

    NetBSD (0.010 at last check)

    There is also a Vigor port in the NetBSD -current package tree. The NetBSD package system has binaries for i386 (1.4.2 and 1.4S), macppc, ofppc, and powerpc (1.4.2), and of course the usual source distro. Thanks to Hubert Feyrer for submitting the package (at 0.009), and Jaromir Dolecek for updating it to 0.010!

    RedHat RPMs (0.010)

    RPMs are available in source, Redhat 6/i386 binary, Redhat 5/i386 binary, and Redhat 6/Sparc64 binary formats. Thanks to Ganesh Sittampalam for making these available!

    Windows

    I'm looking into building a Cygwin+native Tk port for Windows, but I'm not yet sure if that will happen. Watch this space for details!

    Installing Vigor

    At present, some parts of Vigor are in a somewhat primitive state, particularly as far as the build is concerned. Suggestions for how to make things build on various OS's are gratefully accepted. For the most part, compiling vigor usually goes something like this:

    gunzip vigor-0.016.tar.gz
    tar -xvf vigor-0.016.tar
    cd vigor-0.016/build
    export ADDCPPFLAGS="-I/usr/local/include/tcl8.2 -I/usr/local/include/tk8.2"
    export ADDLDFLAGS="-L/usr/local/lib"
    ./configure
    make install
    vigor
    Substitute your locations for tcl.h, tk.h, and libtcl.a on the ADDCPPFLAGS and ADDLDFLAGS lines. If you still have problems building Vigor, read the suggestions below, look in the build/README file, and if all else fails, drop me an email describing the problem.

    Vigor does not support nvi's Tk interface (and configure doesn't give you that option), and may have trouble compiling in the Perl interpreter (which is not included by default). [Update: I think that I fixed the problem with the Perl interpreter.] You will want to read build/README to get the skinny on building nvi. Vigor will always build in nvi's TCL interpreter.

    Vigor is written in C and Tcl/Tk. You must have Tcl/Tk installed to use Vigor. I'm not sure what versions work. I wrote from Ousterhout's book, so I think anything after 7.3 is fine. Most people seem to have been using Tcl/Tk 8.0 or 8.2, and things seem fine there.

    OS Notes

    You may want to look over whatever systems are similar to yours.

    LinuxPPC Redhat GNU/Linux 5

    I've heard reports of trouble building on this system. Has anybody successfully compiled Vigor on LinuxPPC Redhat GNU/Linux 5, or any other LinuxPPC platform?

    Redhat GNU/Linux 5.2

    You may need to set the environment variable ADDLIBS to "-ldl" before running configure. (I've heard a report that "-lm -ltermcap" are also needed, but the reporter now believes that to be incorrect. Adding them won't hurt anything, though.) UPDATE: As of Vigor 0.009, this should no longer be necessary; configure will look for and use -ldl on its own.

    Even so you may still get this warning:

    ex_script.o: In function `sscr_pty':
    ex_script.o(.text+0xf63): warning: revoke is not implemented and will always fail
    This warning (and many others) are completely ignorable.

    Sven Winnecke, who reported this, also notes that the program builds fine on Redhat 6.1 systems.

    HP-UX 10.20 (and probably 11.00)

    On HP-UX 10.20, using the binary installs of Tcl and Tk from the University of Utah's HP-UX software site, I had to create a symlink from /opt/tcl8.3/tk8.0 to /opt/tk8.0/lib/X11. (I may have the version numbers wrong; I'm typing this from memory.) Also, after making running configure, I had to change "-ltcl" in the Makefile to /opt/tcl8.3/lib/libtcl.a or the compile would fail. I don't yet know why.

    FreeBSD (and possibly others)

    tcl.h, tk.h, and friends must be in the cpp include path. If they are in some directory like /usr/local/include/tcl8.0, I suggest setting ADDCPPFLAGS to "-I/usr/local/include/tcl8.0" before running configure. (Note that configure does not check for tcl.h, although it does look for -ltcl.) The same goes for Tk. Again, see build/README for details, and bear in mind that I haven't edited it for Vigor's differences from nvi.

    A few OS's (notably FreeBSD) install Tcl with the version number appended to the library. On such an OS, you must make a symlink to libtcl.a or libtcl.so (with the appropriate extention for shared libraries on your OS); same goes for libtk.

    Solaris 2.5.1

    The u_int8_t problems on Solaris have been fixed as of Vigor 0.010. Thanks to John West for providing the information to fix it!

    Cygwin

    When configuring for Cygwin, create a directory /var/preserve/vi.recover and make it world-writable. (See the comments in configure.in for alternative directories.) (I haven't yet received confirmation that it works after that, though.)

    Jumping Vigor Bug

    Some users have reported that Vigor 0.013, after starting up, jumps around the screen as fast as the system can go. This is not correct behavior. I haven't yet figured out why it happens, but as of Vigor 0.014, I've disabled the code that made it happen. I would welcome ideas from Tk wizards about why this was happening! (It was related to an ugly hack at the top of vigor_eula... see the comments there.) If you see Vigor jumping more than once a second, you've probably rediscovered this bug; please let me know!

    In Case Of Trouble

    If you're having trouble building Vigor and are writing for help, please send me as much of the following as possible. If you don't have everything, write me anyway, but this information will help me figure out the problem.

    • Your architecture, as reported by the config.guess program supplied with Vigor. If you believe that config.guess is supplying an incorrect or incomplete architecture, then tell me that too.
    • The version of Vigor you are trying to compile. I update Vigor regularly, so by the time I see your email, I may be working with a later version.
    • How you downloaded Vigor. I need to know if you got the tarball, the source RPMs, or a binary distribution.
    • What arguments you gave configure when you ran it.
    • The environment variables ADDLDFLAGS, ADDCPPFLAGS, CFLAGS, and LDFLAGS if you have changed them.
    • The version of Tcl and Tk you are using, and the filenames under which they are installed.

    If the trouble is happening when you run configure, send me the file config.log (or at least the final bit of it).

    If the trouble is happening when you run make, send me the last several lines that make produced.

    If the trouble is when you run Vigor, send me a description of the trouble you're seeing. "It doesn't work for me" is not a bug report.

    I'm glad to help out as I can. Vigor has lots of bugs, and I'm constantly trying to find them and clean them up. Sending me complete information will help me fix Vigor sooner.

    Old News

    Vigor Useful?!?

    One user actually found Vigor to be useful! After all that time and effort I put into making a totally useless app, somebody has to go and get some benefit out of it.

    The user in question had been trying to learn Vi for some time. However, his manual neglected to mention the difference between the Insert mode and Command mode. (What kind of tutorial was he using?) His confusion was lifted when he saw the prompt from Vigor:

    You have not entered insert mode before. While you're in insert mode, remember that you need to return to command mode before entering Vigor commands!

    Before Vigor's public release, I had changed that prompt once because I deemed it "too useful" (it mentioned the Esc key by name). Apparently, I just didn't make it useless enough.

    I'll tell you, some people just don't know a bad thing when they've got it.

    Vigor Scooped?

    Yes, it's true, the open-source vi clone VIM already has its own smiling face.

    Apparently, there is an option to VIM called VimBuddy, which will display an ASCII smiley (eg, ":-)") on your status line for different status reports. The Windows version of VIM will also update the icon with a face as well!

    I still won't say what my motives for writing Vigor were, but I think you can be sure they weren't the same as the ones that prompted the creation of VimBuddy.

    (Note to the interested: I don't have any other information about VimBuddy; you may want to do a search on egroups. That shows up a few discussions, some code, and the author's name.)

    Acknowledgments

    Vigor would never have been had it not been for these people's efforts.
    • Illiad, author of User Friendly the Comic Strip, for keeping my spirits up with his work for years, and for conceiving of Vigor to begin with.
    • The authors of nvi (listed in the README), particularly Steve Kirkendall and George Neville-Neil. Without nvi to work from, there could be no Vigor.
    • John K. Ousterhout and the other contributors to Tcl/Tk, without which I couldn't have written Vigor in time to release during the Vigor storyline.
    • Peter Mattis, Spencer Kimball, and the other contributors to The GIMP, for helping even me make half-decent art. (You don't want to know what the art looked like before GIMP's help.)
    • Michael J. Gourlay and the other contributors to xmorph.
    • The guys at Red Bean Software, for hosting Vigor's distribution.
    • Scott Talafuse, Beth Gemeny, and some weirdo named Andrew who crashed in my apartment for the last week or so, for providing ideas and moral support.
    • Noah Friedman, Jamie Zawinski, Jim Blandy, Thomas Bushnell, Roland McGrath, and a cast of dozens for (unknowingly) providing most of Vigor's snide remarks.
    • The Vigor users who provided me with ideas and bug reports... Couldn't have done it otherwise!

    (Note: If I put your name on this page, I probably didn't include the email addresses, because I don't want spammers to pick it up. If you don't mind, let me know and I'll add your email address.)

    Release Announcement

    FOR IMMEDIATE RELEASE
    Mountain View, CA. In a recent fit of madness, hacker Joel Ray "Piquan" Holveck has released Vigor, a version of the popular Unix editor vi featuring the Vigor Assistant. Holveck declined to comment on his true motives for creating the program, although it has been confirmed that he was inspired by Pitr of User Friendly the Comic Strip. A supporter of the Free Software Foundation, Holveck denies rumors that he created the program as part of a plot to encourage the use of Emacs based on Greg's 10 Jan comment. Vigor is currently available online at http://www.red-bean.com/~joelh/vigor/ and is expected to undergo daily improvements based on user input for the next several days. vigor-0.016.orig/webpage/logo1.png0100664000076400007640000001573307103707220015440 0ustar cjw44cjw44‰PNG  IHDRDxGótEXtCreation TimeÐ6Û7PtIMEÐ.™ pHYs  ÒÝ~üYIDATxÚí]LUåÿ¿}¤Ä©á&Êu¢èÔd‰Ûmº Ù6¯S'N+›¶±…EE6š´térËM–T¬QƒÆ6Û `á„ÔÄyY4¡pÒ¤MS6\Z°`ƒñ}}ï©ãñÞsÏó>ç<Ï9÷^Ÿ×ìrïsžç}žs^Ïûý~ž÷ó~&''=±)n !!Á’Ì$466¾ð .Lð/¾t[. ‰»Hf¶1._¾\PPÐÙÙ©û«Ïç«©©Y±b…ÛbJHH2âÂ… ~¿xxØ LJJJKKKNNŽÛÂJÜïdŽèä5kÖ3Yø¤~–pÒgÖÇÄĬk “Ca\â¶Ô÷5$™õÑÔÔÉOÖ ã·¥–¸¯!ɬºº:.‘àˆ»d^µjUÝÝÝ.Š‹Ö™âFì7dJ-[¾DB‚#î’yçΔ Nž<颸”Ö‰7bŒk×®9p‰„GÜÍîïï÷z½Ì /^|õêU·Ä]²dI__Ÿq™›7o¦§§Ûí—„ WÉ¥ qW3ƒyyyÌ À¥ŽŽWdE»L&ãì3ÈÈÈpà Ž¸gŒh Ö××»"+¥].66°fÍ.‘àˆ{‚FFFFfÏž=::j| ¬ñ7n8/ëüùóaBHNN¾}ûö´iÓì·ÕÜܼqãFS—455mØ°Áùn‘Ppf òóó™×€Qmmm Š™ @x.L@KSš…%“%ÜEè:sÔZÚNÚØ êêêRRR(%QL.2K¸ŽÐØ쉉‰´´4«Æ—ÁHLLtFJŠT"D’-$b¡šdؾ};ó2ð o°cR¢-æø±¹. hgg§Ïç‹T?¡€d²D4@'œ3 -mçmlK—.ýᇚšš0X¨‹Oø€ñ%~BÇúABÂú[ )±0/¡-§N*Zı±1˜Ðƶ®»¡,ÑýÌ+Á®††DD+Ì­ˆ%$âúd¦¸Í§,mJ+D%$â3<ñÄíííÆs ÒˆJKnnîùóçÅ÷•„DT#â~fÊ|8&zêgF¤ šú’ˆ-D$ó¶mÛ’’’˜×‹–`Ö!!ªP$$bÉœššJ N>{öì;w ‡šQ¿q QöPÆéD·.!AQÚ Šù:>>.ÎÒFͨ߸Œ66“®’ÏÑ£T»”^Èù'æ$œkÝZ¢ž9s&äקžzJûo|$'¨­­íêê:zô¨Û‚H˜ƒ‘fI(K>à[?wÉP's:â9Ãä3A„˜ Bý)¬îîîîââ⊊Š={ö¸-‹„90²sºÚéb§-“Õ/ŸúÊ¿gƒxòÉ'µ:9vù|çÎüü|Å“|Ž9°O´`¦²³³/]ºÄW²U«VÁØ3( 4GB$&ëVÊ€ÒêUÛÛ0d𷯯®‡6»`FFüü]¼x±Ïçƒ[´`ÁÝJü~kk«öË’’’h°·oݺ…» ¸;ÜÚàà öÓÒÒÔ\¶l™/…âúõë---x `ÁÀÀ€ÊAÜ,œ_åf¬ þžd¡¼¼œÒ6z™YÌÈp‚qlQ µ‰3 £”Ñ^+H¶àý.,,ÄÓ5õ¢à%Ø¿?ÞmU¥¥¥º…Qÿøø¸3·‚ÞÞ^J¸ÕìÙ³ít®eÎî@ ¡½&k…5UƒY㜼î3gÎ$>`¦WMMMOO:ä¡0³¸¸ØÔÌYkk«ˆ~Öš22qwùùùUUU]]]êÔ4*nohh(++£,»hÁk–G÷e0dŽ¤aá6ñQFaÓàà ”0 ¥¬¬,µX¸}jâ…#æÖµó„„ébí}­N^{í5z "ÈL´Äð€®ÚépŒŽŽB3ûÉU×<r|ŠeýŒ²¶ÔÙÙI¯Ö×)"=Vè*ãUq [ ´vEên£tù0HP,¢ÂÂBË]€k+‡‚L#µ ØùÓ§OWÿMLL,**"ÖÀÌÄ”‰è¼ÄÄ:1Þõ!ø#¢«@ÁùÿÖìt:(J´Þ½^¯ˆ(1â­i ›R9( ;9eî…c:´lBk#:®bÚ“ö}r Ý€qô×_eVÈÌ»Ì4VÈá@y Ÿ•ìk¼:\‹›7o}h*kÃ7ñÒÒRî7H»`è±Ñhî…ÃðO‘Œ8À„€¢…èú‡cG+xúé§ ø¬”á;ûEñk@ hZ •ƒNÝÏÍþ„ƒ¸ÝÍfØøL‰Ž„‡Â=ÞÓÔ«lí!†6jöÊhgmŽŠù€Ñ4ß^>‘X»vmÈb@Hµ|ÉL‰ï³ÒD™$±¤O‰ðóÖ´ïR¡-Ê*ŒßP”TÁËoŸbªUm 1Þ°‘‘SÕ¢<3ýýÝËÆiC´?éþzîܹ;v|÷ÝwÕ†ƒî7ß|sàÀí®=&ÆÆƘdóûý[·nµÜ6l`Î={vhhÈrº€+Î,eU__oÿð°•+WR¶ýÕÕÕ‰Keg ùëÖ­ãS—YößH³q” ûA…•GÒÒÇ)™™™ÙÖÖ^­RþÔ©SÊ¿ÇŽóáô¦¦¦ÂáñvÒE¥ØØöŠ’´æ4Ees+päÈ^-Âí§8[œ$kfxg%¬Xƒ¹¹¹L)1䛪“©"Ð(Ç.6èz]>‡„ /X°àóÏ?¹ü­·ÞÚ²e‹v:¦V5™ú„×¾1æß}ã‘vM‡¼â|×,(ñs|÷á1›SÀwã‡2WWW3¥T» Vˆ’LÇrìbf>777oÞ¼Y+ÏôéÓ?ýôSúc6mÚD•9ºñZ7b½pݹ44I^ݬ¬¬äÕ¢‚ÁÁAŠçÌqŒò>p™Ò´Ïì j]f×Àx +‡’ÆÇV(¡?D ÚË‘¼\õI<¥þ}衇^~ùå>Sf6F}˜ÜÏ?ÿ<ýB¦9j*…zL¹úÆhoo0.o™û1€3fÌ Î&òm×ÅÅÅœk´6P¨EŸe9™5Ú‰C&½¤'¨«¡ŸwíÚżq(m ºÐð«¿þúë+W®X“zÉk["“«¼:Ÿbc ×¥LÊøý~^Í1ÛÂ(Ï=Y‚E2S´.q×1e³4ß9˜ÊMV·RÁKHŽ5»Ø%FPþ¦Eà Žu) "î÷hq§;Æ0¨ -e”Ã.vïÞÍ|xÆÇV !4gMN]à¶ÍR¡^òÌ3Ϩ_*ËWýõ×ï¿ÿþàƒÂœþßÿþç¹7‰'®¢<ÚûCCCÌÉs ë|ŸµŠ9sæ,^¼ØØy¾|ùòŠ+è Ê,²YXñ™=ÁüøK›â„0Ë !îiSµ Ï\NuN¨^´hÑܹs&{–©ã 3>P³²²ÄL± ˆé+íƒ×”‡ÖsÐ0§µÛÛÛ¯_¿®›¥Y~ef#à>¢@!§J3åƒÒVø¬ýU7¶JcåƒZƬŠ†Ég|0Pzzºý~¸uë¯.5…'>ŸOœ)˜š£··×™Þ°…“ ‹šÈÉÉ¡¤z1žx`NK  4Äý¶#ÁX…†ÛÞáž’ö¼ ϽZÚ”~fN€1O& ‚éLòJèC Ñî×å 8NÝCDJëdöC;-ÿJlÂ>(iî)Puo8¥•t>3)DÜôÂSaòJJá‰ÐL`ÌÜrD!¹><÷:…“¹««ë—_~Ñý ß3gDœ9MJ ›óUÚÉÌJ›sCK àÒ Ìzx„S‚Â7Ë TN™ôŽZØ"óÒ¥K)NN$[šic£r4!º Âu2qÕÁÀ»Öþ«PÚ¬rfœ---cccöoŸÎËd–šœ’¥Ø8x)Êa‹ÌšæŒtž#óœGgll³0æs$®šUÑÌ¥‹Û·oÓcì"¡££ƒéÊò"³ñB¦¡d¦hf^3îÀæ:5ÌÊ€¾¿‡éò…$ø¥!ËéA»Ѡ“-ÔÏ|³¡½mnH`®/¦¤¤ðÚóàÀÛ=2¸r§v53üxJƹp‹šic£Z“1i¸X­…µuf&Ózzz虴µÌÔíÁþ¦b ‡`< D½†vÁ´yeº>§²)5êmÊWrr²µ#¾†‡‡)ë@˜ræmŒ\¹S•ŽŽŽR²·jó 2EP¡è<¯j[!¹~Â?0+¡¬lY’'”––f6ƒ,gÊ."ç·ørlÎ]\¹S»f¶‡ÚYSS£ûY"B8)ÐÚÃÄg¯…Í×(”C”#×~üñGb###`2%Ò–’߇J:N³Ù¦L’ˆ~Þ@‚™=´ˆK¸gø€¿LWMP'P³0/-_Î1{íÚµ”|†ûí·™ùºa]S¦Áóòò,ìß6…'”oË0¥ µàCfh¦Œç¤X¿ÆÏ U9sº§1¬ñYìÍ…Ò•••”XÎPã0¹_|ñÅÚÚÚË—/«Z®¿¿¿­­íÀË—/ÇÐ@ r‚›CÉ'c ”» ðÍ2(ËNΟ}Í|Èœ˜˜HñÁ”©2愪ŠõTõ,Hû|NOOGeEaØ5P¿ ¤2 `p„š…ÍLßE&l±J4²Ð,JånbÇ|Èì![Ú°£Üƶ.aÞZ¬[·úÙ1ùËËËMe8"‚w-44š²ÓÃÉc¢¹ƒ™W®\É\ê€URRblJ¡Tåv·p€¯;¯¼òJEEQ?ÛÐ{ï½'¢fJŒ71¯5Pö`ŠØ™è¸‘Ùw­ ÊX¯¬_rå”<Iöœg2Ã㥠 \(f&&&&š››·lÙ5ÂŒŠÕ7Ïž={éÒ%¾‘!Æ ìÉ‘‰žr,¡'˜sÖ±®γ£Ó¦MÛ¸q£µç ÅefŒœ8q¢¼¼Ü”oRRÈ¿lÙ2¨b¨GxÝ®DËâcÈ6NÍ|ëÖ-¾檫«™Y Äs¾O8‚ÿR†|kdŽ[\JÝþþ~E—ƒÊÍø^¯Wý%›I)cýøøxUUÕ»ï¾Ë«QØ2”Uú8Ð%üÉŒNaæÇ.qx\œ$¤Â\¸p!???R—BÙnÛ¶ ú6++kÆŒn Ë@AAs¬¯¨¨())áu/(¶L,£pö™=äÐÎÄA§ ¾`ðå™ ³°¸¸¸§§~ï¾}ûrrr¢ŸÉžàêsN{ppðàÁƒ\šƒEC9l"A0·ûÆ.ø“ÙcÉ`Ž[†††0Ì…ÇÌÁûíêê:vì˜3g©ð…]PΰGl6ú–’H"RôC™¡%L…Å¡°“™îMhŠ ³§»×§¦¦Æ¼¥‚€›ùz(é Wí4[²ÐaâC—!³ÇdTf´­H™©ðœû¶ -"%0]½zµÃð§Ž9Â,600——)é:{öì!îN0ñáâ‰"³©é„h˜{Ðå¤å !¼)±¶¶–r9¬t«}ôÑo¼±~ýúåË—Ïš5+á?,\¸pÕªU[¶lyçw™‰ 8bóæÍ”ùÎÞÞÞÜÜܯ¾úÊTåwîÜÙ´i uJaè'WÚÅBD."ÄbÕ¡pæ?xî=öMÝ“©—Ô’j™ð möp¤NKJJ*,,ljjÒ¹ŽÏ@ ®®®¬¬,??ßì Ô M^tö5P¼ôL~¿·Æ¬sxx¦º¦¥¥q?ñÜøÁ å@2'ûþ5ô3Eæ ‘Ù•½òh´ªªŠWºlÀ¡5µ©ÃÆ©††hlðV©dpp°«« cü^S[ÊÐ4ÇÜ£º¯‡„4*èfŒyÌG…‚†Fêý¡›^Ó 9¾n™Idv1ZS__Ÿèþw2éBª««E¿WѨ(ŸÙÜ%à vEèÙ§¢Ðo2ì¨ åC‚Úâ6ßöíÛA¸…0û‰¢01Y´+UZŒC6˜oõìÙ³ `Ñ8°Z® WÈìÄL)žGx,ntÚØ*T}ôÓO?…¤òuׯ_ÿí·ßªß\½zUùðÏ?ÿL™2E½–»`+‚àXáæÍ›óòòü~?3 QSS““SG‰‰‰›ƒð;âõööb@¹ví¬ í$5C ŒqÔ\O½.âÑ“Z½Ï¡v4*råóÒ¥K~øáK—.MÞkH+Ð~Óßß¿k×®GyW}öÙg‚llÑ€íÍ ®„9඘F>[8þ¼òAÙ¬S[[û矔ÿùçŸ÷ìÙsñâE%ÍÍ¢E‹Ü¾‹HMM… m\Fh†z ûdŽòõÉ'Ÿ|ÿý÷[·níìì€Æ¿ýö<´/¾øeöîÝ;kÖ,·eçæÉ,BO–°If€Ò vBBx +ÆóÇ|âÄ èj¥Àßÿ½dÉüûè£F:‡yÒí½Ðfå<LH2ßp$ 9xáÊ•+™™™~øáïAL™2åÆð®¡Êb%¿'Ì=–7pÒgþL†c+ö6¸:>>`o'%%Í;ª8++«»»{ppPQe*Ÿ…ærÌ\búìâûR3ë|V•3\eü=tèú«BïgŸ}6\- úzõÕW½^oii©{xddäðáÃÆebú¸ÓûR3ÿ‹|ÖjZí9ò°´•ó%Ôo蛨,£¹¹¹ªªª¼¼’œ:uŠoåJJÚk×®q”¬GH2ß…Â@u…ç^Nª™ æÍ›'îa]@m+Ÿûúúü~?$Ö8##6?Ô&= Ú¸¡¡v;ýPX”Ÿ”´q If„OPëÒI%³8&AsÏp«!§ÏçËÎÎöz½êÞ]T2Ô{OO˜Gœj‘——wúôi¾·&Á’Ìú .8i­q=¹wï^ÊáB‘’’‚! ηõÇ$™#"ÄÞ/ šÉ¹¹¹êF.W””;ŽSíÄ$™@ ðÔ‡=ö˜ÃÓæ!“ëëë·nÝê¢ tÈÙl#(ÛD7‚H..íº>yò¤dr A’™H{ÁE·›™™yñâŪª*ç©ÉÊÊ rú:¶ ÍìÀÐÐPE”sÃm"99¹´´´¼¼\n¢Š9H2Ç ÆÆƪ««¡¨#ójðwîÜ Ëà…$sì¡££î4Z^™÷•\–EEE’Æ1 IæÆ… ZZZZ[[;;;-¬`eddäåååççûýþÄÄD·ïFÂ.$™ã###]]] ´šŒÞµ6Ë×ë…3ì "++kÙ²ekÖ¬™3gŽÛ‚Kð„$³„Dœ@.MIHÄ þë÷cQQéIEND®B`‚vigor-0.016.orig/webpage/logo2.png0100664000076400007640000001762207103707220015440 0ustar cjw44cjw44‰PNG  IHDRC¬n4Y³tEXtCreation TimeÐ6Û7PtIMEÐ0+dóà pHYs  ÒÝ~üIDATxÚí{l\ÅõÇ×Íƶëø‘ÇÖ±kÇ1±Ý8ñ:v^ÄW$`¥Ž0•¨•"HyH ÜŠW*¤RáV®”H mA€‚JQ j@–"€)n넧C NqÆ¿o÷æ·,û¸sî½ó¸»{>¬Ööõ3sç;sfîÌ™œéééÃ0iηLÀ0ŒXÉ “ °’&`%3L&ÀJf˜L€•Ì0™+™IWÆÇÇüãç8¡¹¹ù¥—^2m¸XÉøè£~ö³Ÿ544XÕbéÒ¥=ôЩS§4$ú‡Zè¨Ö¢–£®›.3%LMMmÛ¶­¶¶ö¯ý+ñ_pñÎ;ß{ï½n¸Á´ùj˜Ž!SþepppÚH]h!2"=Ý­[·Îš5+1­ÂÂBÔ'=yG]D¤?Üââb˜}éÒ%=æéaß¾}«W¯¦JlûöíV‰|CÉ?þ8¥hyäƒ#u¡…ȈÜD¡ûµ‰5õÒ‘žQïQûõ˜§”3gÎlÞ¼9 ²†ù†’GFFˆdÐbJ%FF$¦xðàÁ¤½q,è™å&jS=£öCP‚6 ¥ƒ¶2 ó‹+ûúú²DøŸ×­[G)©½{÷1é mCä& PÊäÁÔ\¨©¨¯Žê·6ßA"ÃÃÃíííô<öööNNNš¶Z7ñJFKO)¯ûï¿ßˆ¹HWh² 7ÑúúzJ™466)ÔZÔ]ºž¡ hÈ©.²ÖÝÝMt§çÌ™“¶ˆWòÄĄГFÌEºö†ÁxdAr‘1R&–žQ›)vBPˆÏ+ýÎ;«««)Ù)..îééI뱃w’T¾Ûn»R|»wïÖl+RZãå—Q:(Ùµu5›b-tµ˜69 GŽéììd ;"Iå{å•W(…øÓŸþT³­HQhŒ—ž.ÜfJ˜ò®q¤ghÊ1mòe0òß²e Å+Ä5p+XÃQ’(¥IqÒpιAŠUŠLzðÁ)’Ð?ãej9ê:QÐñ™^ø\”) X{ÿý÷ŽŽš.`‘Ü!$ÎÖªèSAñ`¶Š¤Qi í“Æþ¬[° õž¢g¨Hÿˆ)j$eLǶ!¹’)/{Àí·ß®ÍP¤%´GÝ»1áª@Ÿ¿Ý¡ëŠÒ)8½½½Â@0Ü´i“F>$å$ eÕ:"=óŸHEØ+ª^¯­&µAçjM@ Ѓð¥tuip¶Ñò¶¶¶R4|ðàAÓ…çwR*'¡’ÁŽ;4X‰T„–À`ÕfŒŒŒ`0Ãü˜vÎTAÑ34¦ÎÇÁž2 GŒ5L$¥’Q‚%wuui°©-áGîeÀ½IŸîïïN^≛ݨ“vؽmkk>i+1â ,V©¦K2-Z„­$T홶”`·?™ÒfcûüóÏ /óîT쯡˜Ê$ÒÔÔôâ‹/ÚW‘±±±;î¸Ã´¥Œ;%ß|óÍ”%¯ôÝÞîÞFÂT¥60ŒÏ±SrYYeÑÜž={ÔŦÀqûk`$LUUB “¢ÿP¼ÖK—.©s°qgÜß»‘ “Ù”ŒîNø"7 ÒÁÞæWÛ3žzê©xÀ´Œs„sb”÷~Ùa:,(1LôoäÈ`­†ÛÔþsÆ5âØšDß•²xÃ)”{²k-‹ñññ®®®‰‰ |ïííåž9½È™&ì¿­¬¬vápø½÷Þ“k\ss³}$ÍŠŠŠãÇ«/%_355µoß¾|kkk[[[ÛÚÚªªª’Þ¤££#n8zæ'žxÂtþ§NBîöîÝ‹Ü!kgÎœ‰Í`(Šf°¾¾¾5B^^ži«=qôèÑ]»vá¢þŽŽFÕ‡ÌΙ3ÇÊ,hŒpyº—ÒqSÂYd¯²¢,2“åÓuÑË5ƒ*7Ä8!QPzzzâFC©vnâþ¦v;ãùC/Å2kÖ,´Jýýý¦v/»®-V EG1€Ñl]N”bÙÐÐå¦rW>S~Ã0ÍÏÀé³QÄž={èAê’bíL°ôlÿêáæ›oÖ,fäŽÒH-‘þe¼îj ž‚£àÇÑÝ;Ô*H j/w7’0W*ÂÓ»®4Ò-Iœgbx& ðKÑ? _O¨ˆ©”4Í[¨DÐfAÏ(7mÏÈim™˜˜p·´ Îvt3"µ öööRn-kÕ;å  ˜¤ÿŸ"0ŽuêK{)¢“T5tûhSèQé]äžžÇ䨶`Ìïba;º¤VA¸a”Rîîî–R¸}B0FÅ{/×Eº%‰ôõõ©«è©€ã£aÿèè¨ô®8)wß}·†‘½¶ ÓÃÇÊ»£ÖA¤ ]dEÏFÕžžø „ÏFDŸH.pªUot›ŽÔfb4\) æ¨Î±¶Àáw݆<ª q!×ÀÀ€Ç‚À„©( ÓáºXUE¿ŒÑÞkˆÜ0í­SrM[[›R1Sj \³zqq TAbP{ï˃„M¨ÛíºXUcA Z,¯žX‹ðÛõËØ¢³³S›M©-=ö˜û£/Ÿ¾NÔ‘‰”UCÕR¢áª‹èºdÙƒºN [ˆ(×öíÛ‡††¢-îYnÞ¼ÙÑT™† ›°Ð‘o‰Üuuumݺupp0:› Wß¹sgww7ñÌà(²æt& ›SuŠð†MúmÕU$aº©«0nÚ,è9öåÓ׉:2Åò²«A¸aè_u$̲ŠDñØ(ÕB?-=±'„xÔ•§ð<ê(Ó:<‡>‰N{EE…Šu`Ĭł֊x²*Ò©(ÇUrZ"Bw-:þKèLÙ¦#̲ŠD)î"dé4¸'®§ˆÞ¸¢nydd„8d@å®Õ&æ1 æäšx¿íŽ÷ÕŠŽ« šŠqôBôþG"B«¤§HÈ@îÎO…–(½–ôók-ˆÛ×<.,ƒ˜)‹10‘¾œ“’»(è¥‚ë¦ RZ;w“RÂgŒ¤å:µ˜DHO‘²|ÏË¢%Ê”¸Š—ö”Õ{`õêÕÞÇPH‹ò¶Eúw²Šÿ‡¬±º›*HÙÛàâEå-—ž—œIŠI„ÜäàÖ ‹¢££Ãc*ÂÉ!ôWÒ‡‘”)tS²–ëªÜUÙtKôíÝTÁØÝ¡68]¼AYybêd ÍJ¦¸ÖÞG”îQîËÄãüqY)¢M¤Œ#$¦8MV2œ‰3.« %¨½Óã)„­µÁðôš•,Ü.k˜pRMîpÊùµ¨ßrßMPVÈÉÝWGT²Ü.«`¿ÐPGN ®ú“OBЬda£&ëîcŸ†ë²2E|…Ù××'·01@ Œ–%Î{Qd,}ÆGÇ+)¨jÂÒç@|#ˆxqöMXK|ÜY›v½PGa%¼Ü‡8’¢0000::j FÈ›6m’•¢ÅìÙ³‰Ó‡rÓµ‡xD9—J.++ëèè^FÓ'¼ÉeOxza÷²‡ÆÑ}à+ÉÊe¶uAA¬£Pêªð€‰ƒA‰á".ãº7§ô·Ä]Ä”ÍÏr§^œ¢®'§--ÊBû¡ãÄÄDww·µãŸøN|?"lw@[‘Â’•Ö׉ºþO8ÔEù”ÈÂ9 uë¨ÅÄJö«Â„КÛ(Jœg¥ïO¤¬‘N˜Š…e.½k——G¸R†ÂkPºÇ=Ír(Km\ëžžžÄëøpÒ΂â#OzGÖ4G,î• (“(ë£GÚ\€¿ C HŸñ9ÂK'Nœ’ЩS§ôäˆ"’ÖÖV›¿¦šI!ÎÅÄn LÅðð°žÒpCSˆ'%¯]»–·Å~ɇpA’@BÒsîg„ÛƒÎ;÷óŸÿ¼²²2''ŸøŽß¤ºX8€”—‡²&Ä^l©²L9r(@ĉz{TÄWð¤äí0{çYèZgáy1Bý¤rV!ÚŽŽŽÇ{̪ßøÄwü&•˜…]¥¬Pž‘Øç:Õ_‰m02ÑH)ÌŸ?_ú=u(ypppÿþýIÿ„ß × f¡’…/‡öîÝ›ô÷N“©îE–Hé9íÅ–ª«EÉ”)nÿâ}ÒÌ~xc‘jÑŸpYbb¼"#h(ÆXúúúì“K5™Ÿª¾¦Šy*ª¬É”žÓ~Q½Ç¹k¢S %³škËåD½ß‚²®5Õñš¤"<½›bÒûl({vìØáÈÎÄ‹…r ²^BJŽ(Q‡„štý>y:²VTh@0”’Y͵år¢ÞoŸ„Q=qïŽðÍD\lnƒè6ÂjcccâN›Ádb—ˆŸ¬Í ÂTT¿Ø`$§^ÇÉÈð8.qŽZ8kÛª˜H „2JŒ†EL¾õÖ[ÂUz°aÆŒ¦K‚¡!¥= l-Nª '!…§wžbŒ…âúΚ5+î .â`?RÞ¯J<J[Uôƒ Fr*禓““”PlL@ájÜÐì Ío“‰gCY  …â¢@ “p˜){ƒôoÙUQ†FlHc%OÓ¬ÅLFÃUžÞM1™x6ÄÝ9Ž¢äBÕÄÍ¡r·¬P‚i*=á…²© FJI+½•L‰8=ž‚rЄ†c“‰g3Mï Ñ÷ cnAœÄuÒcñy å~ E⤼|·" ãTáVúÃÓÛ“!%ŒŒÐWYaØ G&î4ÜmbOO}K³Ä€xQ(‹dmEJ åØ@Y‹ŒÔ™7¥µ·|f¡+n$<½]1™x6hõ4›œôMµG:;;…é*õÂ({ò`¤”´ŒÔ o¡¢Pv,ÁÁûüóÏ…ï?²mó“ ×_½pÉ—Dyä‘[o½Uúm‰Þµº|Q¶pè<ÆY:2•ÜÔÔ$|·¯ý->m®ÁMp+Ó%ã#îºë®ÞÞ^ =3Ío~ów¦¬ß&ÆÐue[¥ŠÍ†Ú©ä@äá5Èy¿I¶qß}÷Á‘!ž´èŽîîî'žxBÑÍ)£t¥Ûƒ) `eEG3ƒ\g¸YÔJè/Íh.ÆT ×Rn „êE8”—@©¶yx‡{( ?(%9#µEþMÛÛÛ½Ô*ü»Š|z-&Ï&)—.]Úºu+ýxt!ëÖ­Ós²q¯¿Š¤)qERmòq‘Ú"Ù»xÞNœ…»‘1cÆ ›1ê£bO8†ÇþꫯVUUi°œÒÄSV%¸€ ×{yFzÛ@9¨-.Î…ÓƒþbL :dTJʱ6À—Fs)qM5JÇèýغDˆRâ»7#µEÉM)Ëz“"ñìÉÅä%£ª¹›\ ƒõõõÐOOlj5;EQ*ö±RöÏËíBŒÔ%/6Ðä»;›ƒ]뤜8qÂêEí/Cg[ýÿTTTD¿ûdghAAAgg§}Å°f}ôQY‰NMMQÞÆÃ0g_hEEó@YVHtU¶1RŒ6…‰±î–-[pôƒŽU@¯KÌ qQ “˜M#µEU¼ûî»*ÿ¢È ÅdHÉ{÷îMúÞàæÍ›•.TVe€ 눆‘‘Ê$¿ÄYk‹ŒR2eÁz±»—ý†‘gƒ®)é¦ zãö$§ÂuAÈhÙ{e€G eˆ,U’›ÇŒRò4­õ"½]”\L&ž Üæ¤i¡£6]îÀ(# y\ D<ÖTúÁëÓ™§daÜXR…Ñõ FžMªEì¦ Ã+ÄSµ½¸”my*ÎÍ4%;Z/ñDy%ÅdäÙ¤€è Â9‡Ú×ׇީ££ˆ4VWW‡Ãá®®.´¡¨Íš'Ì(›‘IPûsX9}ú4ñæeo=Ô–J®Y³f %²ÜêÕ«ß|óMufx'''ÇþYÅøÕW_MMMYßsss“^ƒaä~ô£ 6444TVVâ_>ÿüócÇŽáóÃ?ü¿µ¬GEÓ(½_lM‚Š.^¼ý1VÂýnÏ=÷œõJŽvªIS¡ó»ßýNé–]jjj~ò“ŸÌ;Wi*{öìyæ™gŒd𡇂k={öl¨ƒTB«·ÇÞ÷Q²ÚÍëÐ'FhöëpGÇIj´h¹±í~Œm¶ãzË8%;Rয়~*½ôà<›R2üóßþö·ð§-Z¤.•ööv´õÿûß5çî–[n©­­îX†t¡=KÉøaãGˆüŠ+®Ào¾ýío£çÏÏÏ·®Ñl*åa(n¿ýv{%ǮЌ%"ZBg}u;‘e}¨VÛ'Ȩ’­ïzÊQkÖ¬ùÛßþæ®?÷JÞï}÷ݧTÌ7ÝtóÒK/éÉ4‰®ïØ_Zm=ªŠUÙ>ùä“ØëgD€’ñò†Ôñ y[ßñ{|ª‰PPë]ôᤠ÷ƒ‚ÀðR´Ìˆ“+*1 ×úSœÈ5s×]wÙ_°mÛ6éîرãÿø‡©\"k¹ñ‹_¨û¼õÖ[O?ýôùó畦‚ʆ!ÃÒ¥K¥Ü ý³¥p¨º¤¤ÂFŽOüÆÃÛàïÚr;£¾h¬›8‘ƒËZ[[S­þ‡Ão¿ý¶ô\e 7ÞxãñãÇMùØHܵ¿üå/ô׳îXµjUeeå“O>‰Ì*Jî4d,±IºÕ«£G"xnn®©Ž• ¡þûßÿCoõ]íØæææTJÆ#4’ít­û½÷ÞÛßßÿÏþÓ” ÿùÏÞÿ}Õ1ËËËÑùÃÁX,:¤’BQQQWW×ÚµkÕS¤K›Œ :¡¤8V2Zµ––Œ%Ž;vòäI´ÙÂ\}}=ÜÏ>û,î÷øezÇ@ÓÄ|Ï=÷ìÛ·o×®]ô. Õ·¦¦ò@_ …¢¯mÎ;jttýü|;&´IkˆvŠ> #Ø«®ºêµ×^{ýõ׿øâ 7D[¿~ý5×\£9`¸ôᥥ¥ðÃ%…é&‡°ÀÚøŠ¶“(é+V$NQâ—ºŠ.íi€rþ׿þuèÐ!øDd´®£ÊBºóæ̓h!ݪªªT{€ "@áË—/¿å–[ÐÙ>ûì³ð³ìS·RTýRÊâŠ+®èììÜ°ašwÞyŸN»hŒí—-[†âjhhðÃ\T"¯¾ú*Õ3D4gÎ<;/A`,äÌx %=22’Hù—¿ü%åF)çÏŸÿãÿ(ŠCöqS¾Ú@åyð#PÇÐèÀàXÿ2@ק ™ÕŠ¥W¥š9s&šž… ¢y…¶]KZòÜ5½—fü\î_ýêWöÇ  Nà3^€§ %£%‚ª­wÚÎþ½§§G¢5h``¬Á mþüùøñÂ… /^Tý®‹ñBnnîÔÔÔþýûm®AÅòÿ˜±ÇZê‹.ððáÃÖ*] 4è#|å—N ’bøûßÿÞ´™YFøB×××£‹¾ hXãåbzŒÑO(²¿ÀÞ÷f¤@/ccc\¶lFÑöý³¾Ùù8I£À'¼ûýŒüöž†±€ËŒžJÁpuÉ’%6¯ <¿¨¤ÏŸ??>>~üøñ'N°¤Í"Ü>éçͤqàÀt~ÍÍÍuuuI›]“-1¼ÿò,iã×ÙvÊÄgöÍ7ß<}útKKKbÄU_øT,i!O?ýtIIÉu×]§Â F±ïÚµËþá@šÑÏû÷ïÿâ‹/Ö®][ZZû'_(9 K:)|ðÁo¼/h’o»í6Œ—$Þ•cûöíÂe^§™.æ2üñÀÀ@[[[¬˜•¿…òK%ðë_ÿ:Vi‹/Þ¸q#>¥Ü2~÷Ýw…WnÙ²EÏjM†HEEE{{{~~¾õ£ß•%k%j‹2” gÛËnÛááá?ÿùÏÂÞ8é~øaÓ%ÁÄÓÐÐ7ÛZ[î/ïÚ†ìt¼8*ÒÀeee«V­jii¡/6FÂ]§o{îèè0]L>üðC<÷… Ò¨ON$ã%Á¯&n<„¤ëêꪪª*++‹‹‹£S͸‰µk e…‚‚z>ì((~Õ‘×TWW¯[·Ýr+9J¦Jú…^Э.¸B>ú(¿‚ò-¹¹¹ð˜B¡PÚx×6d¤ãžs÷îÝfm@Kçw²ŒýÌ… FGG3DÉQ2IÒÏ<óŒÙ¥é–ŒeůcÔaÍYf‚wmCúJzllìÉ'Ÿ,iŸ3wîÜ–––ï~÷»^nÂJÎ"XÒ~ãêêjȸ´´Ôë­XÉYKÚ`<¼dÉ×ã8XÉY KÚ³gÏ^±bÅÂ… ­·Þa%3ÿƒ%­“ ¬Y³Æ»G +™ù,i¥äææ.^¼8'ûáV2“œXIŸ;wÎʼnL,è„W®\YQQ¡âpLV2#žœœDÿ|ìر“'OBÞ,i§ƒAkŽ:Uìï°’ÀÙfI;¥°°¾òÊ+•žSÍJfÜÀ’¦é†B!xÔŽv5¹ƒ•Ìx‚%Š‚‚‚¦¦¦ÚÚZÛ!\ÀJfäÀ’Ž’““SYY¹bÅŠ²²2}‰²’¹d¹¤1*^ºtéâÅ‹óòòt¦ËJfT‘m’ƨ¸¼¼¼µµUè8V2£œltQQºâ+¯¼277׈¬dF)itÅÕÕÕ芋‹‹ šÁJf 1’†z—/_%ƒA³–°’“¤¯¤gÍšU[[ÛØØè4tž"XÉŒ/H#I[/™–-[ …”.Ûrf+™ñ>—t~~þâÅ‹e…+™ñ)~“4ºßªª*tÅóçÏ7]6I`%3~Ǹ¤¡á’’’¦¦&?Ìl¥‚•Ì¤ –¤GFFðyæÌ™K—.iH4//¯¥¥¥¦¦Fzl¹°’™ôãüùóãããÇ?qâ„:I£û …BãSV´-u°’™4F‘¤¡Û¹sç†ÃáòòrSk¶ÛÌJf2‰’.((hll¬««Ó³Q¬d&£ð"iH×zQ¬s7¢,XÉLfâHÒÖ6¦––8ÕþYìáV2“á%]TTÔÔÔ´hÑ¢t'…•Ìd ‰’ÎÏÏohh¨©©)))1mWXÉLÖaIúìÙ³¥¥¥p§M›#V2Ãdÿœâ{ÈÑ2"IEND®B`‚vigor-0.016.orig/webpage/logo2_anon.png0100664000076400007640000002662307103707220016454 0ustar cjw44cjw44‰PNG  IHDRû]c7UgAMA± üabKGDÿÿÿ ½§“ pHYs  ­#½utIMEÐ /ðŽ&8 IDATxœíiXSW×÷ÿ 0$€ Ì£ ŠÈ  VQQ«ÕV©Cïj­ÕVÛê­­½mm}hÕ:×NޖˡΊEZD©"*ˆ" *8€ˆ ƒa Éz?x‘GÎ p‚Ò7¿ë: ûìµÏ°ÎÞ{­µ×æA‹-ÿx/»] …B«W¯âúõëxøð!ˆR©îîîðöö†@ ½Z^]´o§š”——cÆ 8pàîÞ½‹ŠŠ LMMagg‡Q£FáÃ?„D"yÙMÕ¢¥ExÚa<3D„Û·ocñâÅ8räêêêZ,'‰0bĬ^½ÎÎÎàñxÜR-Z˜Ñöì,”——cÅŠØ¿? E«åêëëqäÈà»ï¾ƒ¥¥e'¶R‹vø/»¯:gÎœÁ¾}û½ …BC‡áäÉ“šo˜-mDÕ³+ µ^hèèèh´Ql¨ÓV¡PØaY»wïFuuµÚ域¨¨( 4ˆÙZ´pÉsahhˆÈÈHèëë3žÔÐЀøøxµ\u\¡T*‘œœŒŠŠŠVËðù|x{{£W¯^œÉ533Ã’%K0lØ0FWž@ À!C°lÙ2tëÖ3ùZ´pÅsÊÎçóѧOôîÝ›ñ$¥R‰‹/âÊ•+mܸܳqiiiËå­–100@tt4D"gry<ÜÜÜ°cÇ,\¸žžž055ŸÏŸÏ‡‰‰ <<<ðÁ`çÎðôôÔ†Êjy%i.ëàध§£±±±ÕïÞ½‹ .À××Wã/7áÚµkÈÉÉa,'•J®‘6˜››cåÊ•?~<®\¹‚¢¢"€µµ5|||ЧOíª7-¯4ÍÞN±XŒ°°0ìÙ³¥¥¥­žXUU…sçÎáõ×_o—{ª-ÔÔÔ --Õ©ÑUg:::@@@€ÆdhÑ¢)Z´b 2={öd<‘ˆ’’‚[·ni¤aÏRZZŠ?þøƒ1"N$á­·ÞÒx[´h骴¨ì‰#FŒ`=ùÖ­[ÈÌÌ„R©ä¼aÏ’••…ëׯ3– „³³³FÛ¡EKW¦UÿÔ„ XÝWJ¥d4šqÁï¿ÿÎhùçñx6lŒ5Ú-Zº2­Z”ÜÜÜЯ_?¤¥¥1VœœŒÒÒRØÚÚrÞ8ài Mbb"c™ž={¢ÿþœZá[¢  Ã† kõ÷ÁƒcÍš5ÐÓÓÓh;´hi­vÝB¡S¦LaíÝkjj°wï^ÎÖÄáÇÞðx<ÀÛÛ[cm€K—.!88yyy¨««ƒD"yî(,,Ä–-[0oÞ<=zT£mélîß¿Ï̤åÕ§ÕžÏç#((¶¶¶¸sçc%GŽÁìÙ³9ïÑêëë‘À8M‹Å „……§²Ÿåüùó˜5kÊËË1kÖ,øúú6[4tñâE”——ãСCø駟°xñb„……aøðákWgPQQÏ>û J¥Ë—/‡ƒƒÃËn’–öB ”””Ðo¼A=zPZZSUíâòåËäããÃ(ÛÁÁ222š«T*©¾¾žêëë;Ô†›7o’««+ Ï?ÿœ’““)99™ÆO¾¾¾ôÁPrr2eddP^^eee‘‡‡ ;;;úûï¿;$ÿeR__O_~ù%¾¾>ÅÄÄPqqñËn––vÂbii‰Áƒãرc¨ªªjµ\II âããÀY¥R‰S§N±ºöЧOŸfÿ¯®®Fjj*®^½ ///¸¹¹ÁÖÖ¶Móú7n <+V¬@pp0ž>ž®^½Jeee¤P(šÕA(**Š’““)!!FE  ÷ßÿ¹ÃÈȈPhh(íß¿ŸnÞ¼IÁÁÁ€Ÿß¦ëäóùdooO3gΤÿþ÷¿tëÖ­Ÿ»&9wîk;<Ø켚š:qâÍŸ?Ÿzôè¡ö5ÛÛÛÓñãljˆˆUÙëêêhêÔ©¬7ÖÖÖ–þüóOÎnÊÅ‹ÉÉɉQ¦T*¥Gµx~jj*EFF>WžÇã‘®®.™˜˜P÷îÝÉËË‹H'N¤… Ò÷ßOû÷ï§ÔÔTZ¿~=YZZR·nÝhóæÍ”œœLcÆŒ!´jÕªfò~þùg•œ~ýúÑíÛ·iõêÕWöÚÚZZ¿~=X,nÓËÿâa``@aaa´yófêß¿«åD"7Žòóó5v]Ï"“ÉhïÞ½4vìX277ïÐ56½fffN?üðÕÖÖvÊuµOÙe2-Y²„\\\H ´éãM?&"5”ˆhÿþý¬/ŸÏ§+VP]]]‡oˆB¡ -[¶°~`æÌ™Cr¹¼Å:8@ÞÞÞjß‘HDVVVäããCÔ«W/@ï½÷­_¿ž6mÚD–––N¥¥¥¤T*Ÿ“×ØØH?ýôŸÏ§ŒŒ Z³f éêêRppp‡ïIK÷èúõë4yòdÕ¨‚‹ƒÇã‘¡¡!ã½744¤9sæPII ç×õâ5ÐÛo¿MfffmîÉÕ9Œi„ tñâÅVß%.i‹²+•J*,,¤‰'’žž^›¯ÍÐÐâââT²ÕRöªª*rvvf­<((ˆ“^¬®®ŽÌ(ËÈȈŽ;ÖLéšØ°aI¥RN^ÒÓÓ#>ŸO¤_ý•ÒÓÓ©¢¢¢™Ü?üø|>%''Ó¹sçhÈ!äääÔá{ò"§N¢   âñxœ+Ó!•J)66–žBFFçu·ǃ»»;-Z„iÓ¦it…Ÿ\.Gbb"–.]Š¬¬,Éy–ÜÜ\,\¸|>¯¿þúKO—^QQo¾ùIIIíÎ1uêTˆÅâÿû‡º_¤””µæ K—.íð×oãÆŒ2ø|>-^¼¸Õ)Cii©Z.C.Ò××'‰DBöööÔ§O211¡aÆь3ÈÝݬ­­)33“îÞ½KÕÕÕ2 ݾ}»™-BÓÇ#JJJê°+SNŸ>MîîÎÎÎtèСVGŒEÝž}ãƲÁØØØP^^Þs²ÕVö’’µ^2{{{ª®®n÷ÍÉdŒÆ!à©o=11±Õ:._¾Lƒ êôåÙƒÏç“®®.Oíãǧ кuëèСCtîÜ9ÊËË£’’ª®®&¹\Îú‚=|ø¦NªÖ°ÎÐÐ|}}é?ÿù>}šÊÊÊH©TR]]eggÓ?þHC‡%‰D¢ÖTÀÏÏ._¾Üîçª.yyydcc£Ö=ÖÕÕ%wwwŠ‰‰¡;wRAAª¨®®¦¬¬,Ú¹s§Êz¯®—ÂÓÓ“Nž<©K½:Êþù矓……E³ÿ‹ÅbêÕ«}þùçtöìYªªª"¥RI>¤ãÇÓ¼yóÈÉɉôôôhñâÅTSSóœlµ•½¾¾ž¾ùæÖÞÝÐÐâããÛ}3Nžø€6nÜH DDTQQA¡¡¡¬ç[YYÑüÑì«Þ tæÌÖHŦȥK—Úü\Õ¡¾¾ž¾ýö[266fm‡mÞ¼¹ÍžêêjŠ'kkkVººº´mÛ6ίSeoéö{÷nµ¯·¦¦¦Å)n›”½´´”ÆÏ:ìëׯåæ涥j""*,,¤áÇ3ÖmnnÎZ÷‚ ÈÔÔô¥+n{G€ ÈÒÒ’œ‰ˆhß¾}¬½¯D"¡={ö´ùC«T*)##ƒõÉãñhÙ²em~®êÈOKKS¹;™Ž=zP\\544´K–B¡ „„êÙ³'«,WWW*,,äôZ۪쉄öíÛlj— MÊND´víZ244dmàŽ;ÚdäP*•tìØ1ÖùÚˆ#Xë>|¸j¾ÜÕG …‚FÍXN__Ÿ>ÿüóv»Äär9mÙ²…Õgïââ¹?º¶¶–,XÀz/„B!mܸ±ÃƳúúzÚ¼y3k€Ž¾¾>­\¹’Sw\[”ÝÄÄ„bcc9 úi³²_»võ«ÈãñhîܹTYY©v½µµµ´|ùrÖQÃöíÛë©««#‡N÷?kê°²²¢»wï²ÞsÿÐ hĈŒrtttèúõë’ó"ùùùjÅD 6ì9¿qG(..¦Ñ£G³ZüLœÈ$R_Ùutth„ tÿþ}Îd·y%€««+üüüËÒÒÒP\\¬v½•••HJJbÌ3׳gO1ÖSPP€²²2Nvp}pttDff&ã¶ÑB¡!!!ðôôì,[[[„‡‡?ï›}¥R‰ .tH΋8p%%%ŒeÌÍÍñÉ'Ÿ0¶­-H¥Rµvû¹ví2339‘Ù$ þõ¯=]ÀÂmVv@€™3g²¦¾té222ÔVºììlƬ8<£Gf½ø¼¼¼ç‚`º:...¸~ý:jkk[-Ó´¹GG]ttt0`ÀÆ{LD¸zõj‡ä<‹L&ÃŽ;Ëðx|Xme?tècžzSSS 0€ñË®P(Ý©;Õh3&ð‰DpwwçDžƒƒLLLË´eÄÆFzz:k}¦¦¦ouÙg{‰D5jk¹óçÏwêÞ†<111œ×Û.e766Vë&ýù矌Û55Q]]?þøƒ±Œ‡‡z÷î͸¹¶¶–5 mWBGGžžžxüø1ãLWW—³€–––000`,Ó´A¤¥¥áÉ“'Œeáã㣑ÍHÌZ&++ •••œËnîÝ»³N•ÛC»”](bôèѬ=@yy9Ž9ÂZß_ýÅø …Bôïß...Œõç.·gáñxjÃ:Ó¯):œndìرX¾|9£²"33ÏÙ²²²——×êyM1ÎØÚÚÂÚÚaaa¨©©Aee%?~Œ   Ÿ~ú)LLL ‘HPPP€ššðùüN3Tµ„………*–ÁÃɤÕÞ…ˆ‘‘³gÏ"**ªÝ2oÞ¼‰“'O2>K‘H„¾}û¶[ƳÔÕÕ±Úttt`hhȉ¼–àóùj);Û¤+Ðáñ‚££#«¯²±±|î†)•JÄÅÅ1‹xxx ÿþž¿ðx<ÂÒÒ...èׯF…3f@OONNNˆ‰‰Qí¸¸¸ ÿþpww‡ ÌÌÌ ¯¯ßi銤R©j.©§§‡1cÆ0–/**–-[PPPÐ.yuuuصkkª«‘#Grf £§k3XËi:¿»:vBøu‡ï"ÇÃo¼Áªiii¸wïžêï²²2$''3Ö¤Ñí†ø|>Îœ9¹\cccôë×FFF°µµ…X,FZZºu놢¢" 4ãƃ···Æw‹m2J™™™©þ7qâDF%#"?~kÖ¬a5°µtî_ý…M›61Žf ðæ›o¶©n-¯œ|2ûöí GGGÆ22™ì¹ ;Æ84211Aÿþý9ëEZcÆ Í➟íqâââƒ1cÆà·ß~Cff&îܹƒôôtüúë¯øôÓO ¡PÈYFsssôèÑ㹨³³3¢££ÏS(ضmbcc7Ã|ñœãÇcéÒ¥¬sõΆðÀÓ)Û=#"n ND¬vÿˆy9Qv©TŠÈÈHÖáо}û —ËÑØØȺ󫃃BCC_Šëìþýû¸té>ùä”——£_¿~Ïýnbb???L™2K—.ÅÆaaaooo,[¶ –––˜>}:ÜÝÝ¡«« ‹6Ù,--›%Åb1¦OŸÎEX[[‹ØØX̘1©©©¨®®FCCƒªÇ&"466¢®®÷ïßÇ—_~‰wß}—5hÄÊÊ 111œZÆõôôX·ãjÚîIS(•Jµæãš4vœtEÆÆÆ4hvïÞÍ趹uëNŸ> ±XŒk×®µZ®iYMS¨C·nÝðøñcܼy½{÷~î7¡P¡P###…B˜˜˜ ,, {÷îEDD~ùåØØØ@,COO½{÷Æ“'OðèÑ#TTTàÉ“'¨­­…\.nNhmmÝ,7ÇCÿþýñþûïã‹/¾`ì¹e2<ˆ£GbàÀ†³³3LLLÐØ؈û÷ïãêÕ«ˆW+Î]WWo½õÆŒéÍÂÐÐb±˜qE™B¡@UU$ grŸ¥±±Q-·š:î¹WÎ’{{{ÃÝݧOŸnµŒL&ñcÇ`aaÁñ% Ý%bš†óvvvðññÁ¢E‹Ð·o_xxx`þüù>|8îܹƒÛ·oãÆÈÍÍEnn.JKKUsm;;»]hMJWXXˆ5kÖ°‘””„¤¤¤]Ó!C0þ|ÎÖ’7all ##£c0šhŠÔ”íF¡P¨¥ìêÞ¼êp¦ìðóóùsçZc544 11ÆÆÆŒþm[[[sÕ´—†§§'ìììTîEôêÕ ½zõjwæææX²d îÝ»‡½{÷jÜ=ˆ¯¿þš³UuÏbffÆj“‘Ëå¸wï9—ßT¿:¡°ööö‘ß™pæÓhZ Ç6·¹zõ*Îœ9ÃØ+½ùæ›Ð××çªi/òòro®®®ÆÁƒYËõíÛæææœÊ~p®ìVVVˆˆˆÀ¡C‡Ú|®³³3úöí«ÑB;"Ríôª êëë‘€~ø'Nœh5(¤)®ÜØ؆††044„‰‰ !•Jáêê ôéÓæææ/ÅûáïïgggÆ<ÅÅÅHIIÁ!C8“ß¿?îܹÃXÆÐÐ!!!Z?{K4 ;Ö¦È'>ŸoooxyyqÝ$FfÎœ‰'NpZ§R©Ä²eË8­³‰òòrüüóψmQA,-- WWWH¥RH$H$˜ššÂÜÜ055ÕH&”ö  1nÜ8ÆÕD„£Gâí·ß†··7'r‹ŠŠ°ÿ~Ö¬±...ðõõí’nàá\Ùuttàëë '''äää¨}žX,Fhh¨ÆÃc_dìر³ü:>>>œY㫪ª°nÝ:|ÿý÷Ï%òäñx°··ÇôéÓ‰ž={ÂÄÄzzz]â%ŽŽÆW_}Å˜× ??;vìÀêÕ«;,¯±±ñññHIIat] ôëׯÓ; M¡‘‰™››ÂÂÂÚ4ï“J¥¬+»^&7nÜP+†úÁƒª|zœ-šillÄîÝ»Û,cï믿ŽóçÏã³Ï>C`` ¬¬¬ ¯¯ß%x°2wî\Æé›R©ÄÚµkßáTá'OžÄÊ•+Y3ÛØØ`öìÙ¬!½](»±±1‚‚‚Ú4Ï fÍEßÙ¤¤¤¨Öv¯\¹wïÞm±\||<„}ûöµ{™)2™ qqq->?ýôÓ.mÔ‰D3f «{K.—cÉ’%8yòd»Ç\ºt ‹/f«OG}/†Iwe4f E÷îÝÕN®ÿÆohª)mbÖ¬YXºt)àÈ‘#˜3g"""pñâÅVÏÙ±cär9"##5–ʺ¾¾¾Õm—ŠŠŠÔÊ3^SSƒÜÜ\ܸq………¸sçÊÊÊÐÐÐ>Ÿ¯šãÛÛÛÃßßnnnËêú"žžž˜4inݺÅ8íÉÎÎÆG}„O>ù“&MRÛ˜ÛØ؈äädØNsó IDAT¬X±‚ñY6áêêŠ÷Þ{¯ËŒŽÔAcÊîàà€"++‹5†ÛËË«ÙʲÎÄÚÚµµµ¨©©¯¯/|}}áââ‚ßÿÀÓ=zôÀèÑ£›å¯ªª‚L&ƒ¹¹9Ξ=‹£GâðáÃ=z4§mdZŠ9{ölLŸ>!!!ptt„P(„L&CQQòóóqíÚ5ää䨶ƒËåªÕ‡ …Bõ|ø|>„B!ôôôУGŒ5 “'O†½½½F£õôôðî»ï"==lõQ(¸zõ*æÌ™ƒ?þøsçÎ…³³3Äb1D"‘*í¶R©DCCjkkQ\\ŒM›6aÏž=jíhaaåË—ÃÙÙY—úÒИ²óù|Lž<[¶laLsÔ”zJ“©‡ØØ»w/ÜÝÝ€Áƒ£ªªJeéNOO‡jIhJJ ÂÂÂ<µŒøá‡8zô(vïÞììlÔÕÕidH­££©TÚbžõû÷ïcåÊ•–Ñôœ “ÉPVV†ÌÌLlݺsæÌÁäÉ“áì쬱l=‰ß~û-nܸÁ¸ä–ˆP]]¸¸8ìß¿½{÷Fß¾}áìì 333TWWãÎ;¸|ù2þþûoµsÈáý÷ßGTTT§e%ê,4êЀ““rss[-caaÐÐÐN.²¡«« oooÈår¸»»ã×_Ehh(¢¢¢œœŒ·ß~[ÎûðáCìÙ³ÀÓÝhض°êh»¼¼¼8ÝgM]>|ˆo¾ùgÎœÁòåË¢1YXµj>úè#µ¦DµµµHKKcÜ´-Ìš5 ³gÏfÝݵ+¢Ñ0)]]]Œ7Ž±LŸ>}àææöÊÌ‚ƒƒÑ¯_?8::âþýûˆ‹‹Ã!C°ÿ~ܽ{6lÀ† ðûï¿C(â_ÿúôõõqþüùsÕ¯^½|>¿CQiúúúxíµ×^ZoSWW‡'NàwÞi“Kµ=DFFbõêÕú^L›6 Ÿ}öY³\ÿ49~üøVèééaàÀ¯l,|||<„B!²³³qöìY¸ººâÔ©SG@@F…ÄÄDLž<·o߆¾¾>Ö¯_ßl[¬;wî`Ê”)x÷ÝwÛÝ¡Pˆ¨¨(DFF¾4…W*•ÈÉÉALLŒFW¢éêêbìرسg"""4šŠÏçÃÞÞ_ý56lØÐáõ¯2KíÞ½;BBBZ Ÿµ¶¶FHHH§Åa·…¿ÿþ·oßFTTvîÜ©2ZõêÕ Û·oGQQêêê››‹ôôt>|ÑÑÑÐÑÑÑØ -GGG,Y²2™ )))‘¡W®\ÁÏ?ÿŒeË–iÔÖâããƒmÛ¶aÓ¦Møý÷ßQPPÀéú}‘H„!C†`îܹ2dÈ?ÆŸÞWv „……!!!¡YŽpWWWøûûkº ¬tïÞóçÏÇT “’’ŸŸ7Þx‡Æ©S§PUUÕ¬—yðànß¾íÛ·£ººEEEK(ÁçóŒÍ›7cÍš58pàcÔÙ³ˆÅbxxxÀÛÛ®®®èÙ³'ŒŒŒ —ËQ^^Ž[·náÌ™3¸xñ"kÄ_]]Ž9‚ &¨µ¹gGèÑ£–-[†‘#GbçÎøí·ß:œÃ] ÀÏÏ3gÎDddä?"1…:h\Ù‚‚‚àääôÜ|>&LÐÈÖ´mÅÐо¾¾X·nÝsA+&LÀ¦M›0~üxðù|œ8qâ¹` ]]]ÁÒÒÄÑ£G¡P(0|øpxxx &&«V­‚L&ã,Q#ŸÏ‡§§'Ö¯_¥K—"55§OŸF~~>JJJPWW]]]X[[ÃÎÎ^^^*»ˆ¡¡¡*mV“mˆ T*¡P(ÐÐЀ¼¼<ÄÆÆâÀŒƒ999HMM…¯¯¯Æ.5-FéÛ·/-Z„#GŽ >>^åJ¬¯¯GCCƒÊ•üß^"‘b±fff Ä[o½???vú”HOO5·¢¦FK²¼¬W¯^˜1cÆsîǹ/š Î;‡ÐÐPôîÝ[嶈E^^&Mš„   èééA*•ÂÀÀ¦¦¦èÖ­ŒqîÜ9`àÀ‰D¨©©'1ÝÏ¢§§{{{ØÛÛcÊ”)í®‡ÇãAGGGµäÕÏÏÛ·o‡‰‰ ~üñÇVݦJ¥)))˜1cF§¸My<ôôôàèèˆùóçcþüù(((@VVîÞ½‹¢¢"UOàéGÑÌÌ æææ°³³ƒ‡‡\]]5žóŸ Fï”&ée722ÂÂ… ;CT‡Ù±cbbb‚Ë—/c×®]èß¿¿jƒ ¬[·–––¨©©Á·ß~ ¸wï²²²T=Å›o¾ùÊxÚŠP(ÄüùóqþüyÆh³ììlÙ'Ô¡éc§E=^=ËØKb̘1˜0a€§QqÓ¦MCPP àíí¯¾ú 3f ôõõUQXD„+W®`ñâÅ "ðx<”••A,#!!™™™/ó²Ú­­­*x¨5Š‹‹;¼(EKçѵ³DpHÓ¯¦¦Ÿ}ööìÙ”––bòäɨ­­U k•J%ìììP__òòr””” ::ƒ ÂÂ… U½]EEd2ÙK n/èÙ³'c™ŠŠ ­²w!´={ áòåËX¶lŠŠŠðÃ? 88C‡…D"\.GFF.^¼>ŸyóæaêÔ©¸páöïß߬¾5kÖ¼„«èJ¥’ueYSº–®¶g†ùóç#118~ü8Œyóæ!..‰‰‰ÈÎÎFDD† †úúz”––â·ß~ƒ¹¹9***ðå—_æÎû’¯¤ãTUU±’ÌÍÍ_É --£}RÏàéé©Z¿\[[‹ÌÌLŒ7uuu3f ¶nÝ sss@&“áÎ;xï½÷`ooüü|888ÀÇÇ#GŽÄÏ?ÿŒž={r©©Á¬Y³ðË/¿ ¤¤D#Û §¦¦²&cìÌ%°Z8€´Þyç¼ÿþûZEï‚h{v5hšßNš4©ÅtÒÿó?ÿƒ¡C‡‚ÏçklXNN.\ˆÔÔTÖ95×ðxDEEjjjTþy‘H===˜ššB"‘@*•ÂÎÎî™+]Ëÿ¡Uv-Zþ?áÿµZŠÝßMIEND®B`‚vigor-0.016.orig/webpage/still1.jpg0100664000076400007640000002317107103707220015616 0ustar cjw44cjw44ÿØÿàJFIFÿá NeoGeoZÿÛC     ÿÛC   ÿÀ"ÿÄ ÿĵ}!1AQa"q2‘¡#B±ÁRÑð$3br‚ %&'()*456789:CDEFGHIJSTUVWXYZcdefghijstuvwxyzƒ„…†‡ˆ‰Š’“”•–—˜™š¢£¤¥¦§¨©ª²³´µ¶·¸¹ºÂÃÄÅÆÇÈÉÊÒÓÔÕÖ×ØÙÚáâãäåæçèéêñòóôõö÷øùúÿÄ ÿĵw!1AQaq"2B‘¡±Á #3RðbrÑ $4á%ñ&'()*56789:CDEFGHIJSTUVWXYZcdefghijstuvwxyz‚ƒ„…†‡ˆ‰Š’“”•–—˜™š¢£¤¥¦§¨©ª²³´µ¶·¸¹ºÂÃÄÅÆÇÈÉÊÒÓÔÕÖ×ØÙÚâãäåæçèéêòóôõö÷øùúÿÚ ?üýjú«ö/ý°®~jÉá¯Ï-ׂï$KÇOryuÿ`÷­|¯ŒÒmª=ÉEIYŸÐ¨ÚêÖ0^ÙOÕ¤è$Šh˜2º‘AEX'ùiû~ÙS|&¿¶ð_‹îZo]JÚòVÉÓ]Ž9'þY×û½zg¨Ö÷1^ÛÇq‹42(d‘CЃLó¥f>Š(4(§QE üïÿ‚™ü†Íì>&èÖk™Å¦±å.79ÿW3c¹ÆÒ~•ú!Xž5ðf•ñ º—‡µ»T¼Ó5L3Dã±èG¸8#éAq|®çàCJí>2ü3¿ø?ñ/]𦠭æX\2Å!ëb<£ª‘\]QÛ{«…!4¤â™MQA8ª!°'Ú:ÑVCaHM!4”ìCaEU¶PN)94ìMŦ‘RŠiɸÊpñ¥ÑoJÞV©LÙ6lzFäÿË3ÐwÓø¯h  §c9%%f~ÿG"MI¬‘¸ ®§ ƒÐƒRŠüðý‡lÿ즲øyãËÿôBV'Vœÿ«=2±íÙXýjýV ¡È# ŠG ¢Ó°´Q@ @iÔQA'ÅßðRÙþø|AÒ­×4@«zÑškOSþá9úf¿.ó_Ðf§¥ÚëzmÖŸ{ÜÙÝDÐÍ Œ«£ ~ ×â§í_ð5þüaÕ4Æ‹?ú^™#œîº.{•9SôªFôåÑž8Ni(¢¬Ù°'Þ´J£6Ŧ“A4•HÍ°¢ŠCTfؤâµivÕq•,HNIü(HË0½Y(àv †È¦SLÛÍ‘ÒàÓöÒ„ c1F*M´Ò´a¤§”ÑM ьԊ3QÇS(Íq£ÖlP´l©Í<%Uˆ¹Êý ý‡ÿlÏ·¥—Ãßê¯2!Òµ{–ÿZ:,2±þ.Á^ç–üüÙOˆ¼2$‘»$ˆC+©Át Ñk™ËT~ùšu|Wû~ØËã(,üã[½ºükåéÚŒÍÅâÄl{HOï}kíJÍ«Ì)i)@ÍU‰M|ßûs~ÏÐ|gøOy¨ÙÛyž'Ða{›_½" 4‘ûä/ÿZúJšêJ°OôöÔþzž2¬AÁ¥}?ûxþÏ°üø¨5"Ý¢ðÞ¾êÕb›?½>™9ÐûWÌÞ]jµ6æЮWÚ“eXòèÕ$C‘[f)6Õ“4¥UŒœˆ6P§òóNUr”¢:²"©#ƒsc·zr8!Ú»»šV\Õ¦\t¨YsL’±\š<³éVtyt ­²œÚ¦ØhÙÅrµ °Â¡z@ÔÚsÓhE#Vš²•N«‘äG§"d(ØÅL«š³&Ä NÔŠ´ð•i¶2 $µž9 ‘áš6’FÅYX‚èAï_¦?±wíÄë+ø¾å!ñe´Am®ä8Š(õí(G~£¸_ÍAX°»¸Ó/`»³šKk¨IбWF ‚:hq¹›w?w€õ§WÌ?±ÿíimñ“JÞ#ž+_Ú¦'h¾@>úÿ´;ƾž¬^›‘p ô¢Š›Šç’~Ó_l~=ü-Ô4)×n¥k­6qÖ;…S´}¡¯Å­KJ¹Ò5 ›¸Z «iZcq‚®§ÄWïí~~þ×ß²æ’~3éþ'³•b±ÖÃÜj6y‰WhÜ  u>ù¯G…«ŽÄC I{Òþ™¤#*’PŽìøÂß 5ÿ²:ÁÞÇœÿ*צZ~È5½¶ó¢XYyÀý+ÐÎi’-«Š­!«RÕ9MIh¹j(¢‚ì^ˆàÕèOJÎVà »W2=9—ãéVcZ‘VãæµG3d¨¹©BÒ ¯MøÃÛ¯ÛY|I·º:Ö"[»{“ ÛÉžL ”= ÈÇ^™ªó0ló`”øài\")v'Tdšý}ð¯ì›ðsDµ‚[i—ѲïŽkÝ×{äÈ[5éz7‚¼?áèÂiZ›§ ÖÒ8øü¨ö‹¢%³ñßÀŸ þ%ÜêÖZŸ…¼/â{m*Ëoyke*„qÈ!ÈÇë_«_¼OãOxÙü{áɼ=â1Þc&ËŸI+¹î0sÛéqKQ)stÌPÔüR0â³°òjv±]›g¸gqBÜ€kãoŽÞ$ŸÄ¾7×®`q£}†ÜGópœ61êÙ¯ ¾&x1udÜiÚ”ÖZ³-°åv€1Û5ó÷‰¡?äI5‡Yíe”Êd—ç'-’OÔ×é|'XZÿYi¹µd¿7•¾óÖÁÑœ"ëÉYY¤ÿSàŠ:V·¦øÓS·Ö짱»‚SE0û¿Jæ#Šý ñE§‚þŸÀ~ ’ÆCæDÙh¤þòæ¼ÌçŠu§Œ®îäîü›ééÑEj^ÊÚÝ3‹F’ ’H£‘U”àƒ_PüñÛxÛÃ’é×äIwn»Ÿâà×)ðKör›â”ºî´çOÐcáÉS1öïLuþ~¿¥ü>Ò¬®þÁàè"·cò=ÖÐYÿRIÏÿ¬W±ÂÿXÂWöÏJmkú?¿ð¹éàiÔ¥%Uü/§så/‰žoxÎöÚ(ÿu#y±„^=±õ®XBUŠ‘‚85õïÆ¿Ù·Ä6~]rÙ¾ÕpŠZ@Ü’§Û¶9¯” #šE””1Á½yî J¼ªá›jm½¬—’ùþ›ˆƒ§Q«X©åqŠ¬ˆù¥hëåÎr“&)›}ªÛ¥3Ë¢ÀW+Q:U§JˆŠCE}µ ¢­²àUY¸¤2”ÇBcWg5Ÿ)ËTE E éKA¡b­Û½T©`l5r£Ñ–ÆÄ&®ÃYÖíÀ­+drH·«µun1Z£ϳ¿b¿Ú×þ),üãÃý#´ÝBvâÐô1þæx¶qÒ¿C‘•Ð2ÊFA¯Â¤\×Ýÿ±gínOÙ<ãkÒ[ˆô½Váúô ïýÖ=z@Îs‡TEϺÍ.)h®p¹Ì|HñÂ|7ð~¡ât«ý^ %%¾œŠòíÎ aˆàu>ƒ5òŠ?উ Ð<ÏÉ .¥{Ž;ˆ§òÝø×ÜSCÌ2E*,±H¥d0<Gq_™¿¶_ìÕ'ÂIâ-ÜŸ ê’– ƒ"ÒSÉŒú)ä¯lq[RŒ[´ŒäÚÕ^| ñ•ïÅ_ Úx®þ8"½ÔÐK,6ùòâãW$ž‰5࿵ÆWâ40kqÍýŠmH‰†voÏzÖýƒ~)iöÞ÷÷ ñÊÂ0ÍØž+ìᇾ"[Fš¥¬W Œ†`+ïòüâeh×å÷yy}4_åcègˆ\¤´?8¿d‡³k‘xíPÍš³·Ùd9\œV7íMàäMgÃ6‘œÊó %cÔƒŽZýÕ¼áï‡:5ŵ”Q[G“…g5ù¯ûOüA¶×>"içN”I™!“#‘¿r‘ü«³™ÒÅájI§f¢—wfµû«ŠQ¦ºTé?n¯ìí¬–FƒÃÚ}šâàHÛyÎ:þ|÷ãŠùbëÄڥϊ¼S&™©3û.B±Àz¾Üuöö÷‡ÁoØx£Â6‰ŲqžäW5âŸØó¾!ñDÚôMä4§tȇûó^†]›RÂÖ橤tkM³Óò+î.Õ)¥Iê`øÄwÞ2øQ§ß_!ó$‹çVkóó㇇ñ'\¶ˆˆÍ檎Á€l~µúƒâ/Kð_…VÎÙ’hbàtÍ~b|ZÕ]ø‰­]ÆÛ¢iB¡ö ô¯+:­G†u!^wKÊÌñq59¤¢ÝÚG#æ‘’­ù¦:WÃXä¹M’™³Š°ËÍ4®HÊŽ¼T µnAŠ„¯4€¬ãŠ¥9«Ò÷¬ûƒŒÔ²‘ŸpÝj95féê·jƒhŠ´´‹KAEŠU;XfM5ÍcÐ5m_"µ-ÍbYÉZöÍÒµ‰Ë3J*»Q‡ «ÑVèæe˜Ö¬Ç• ƒ‚9T1 °¢´F-Ÿ ÿ±·íf¾,‚×ÀÞ0» ­D»,5 ›kQÒ6?ߧ¨µö~ÚO-ÄWò¼ÄâH劲09 ä{×èïì…ûTÇñ2 x¢ácñU´x†åð«|ƒŒú qߨôõ)[ÞˆFWÑŸQÖ?‹ü%¦xçÃZ†…¬[%Þ{ŽXÜgèG¸8#é[@Q\æ‡äç¾kÿ³¿ÇK (K7ئ¹XÞŒ…¸‡9<|ÀqÐ×Óþ3ý¦õ?…«gò–I!‰²2yh÷W«þÖ>Ó5o†ð_ÝÚÇ-öŸnö“‘óFY¶¡Rxöñíaò_iñzEÿÈ+_¥äÔ©VÉ«T©Ê>ÒÏÍFüÏBâ°'ÕIX£ñ;öÃ×üh—0@dE‘Jno”}qÞ¾y•¤¹‘¥•ÚIîfc’M+§Ìj@œ ø¹NSø™âÜõƒŸõ?†·±Å,-‡LÊã§Ö¾›Ò?mk9¡DÜOšÁ0H'ŠøI’¬èéÿ›úù‹ÿCèàkOÚÓ õ‹’Zù³xM¶¢ÙõíñcVÕ<òE#Ä.=šù7ibY‰,NI=M}ñÚ‹Á¶@ GùWÏ8¯¤âÚèbhÂ’²äÿÛ¥þGN6„põÝ8ô±N E"UÀŸ-A*×Âœ%&Zc®X+ÍE ¤UÊ’ ‰†L⢓…©ŒÇÖ]Óu­ƒYoŒóY³DgÎÛž£¥c“IRn*ÒÒ/JZ–Š(®s¸žÕðø­›Wâ°Q¶°5¯g&jâcPÜ·< ¿¬ËfÈ¥nzWDN)âéVPUhºU´è+h˜²hÖ¯éZ…Ö¨[ßXÜIkwnâX¦‰°ÈÀäjœb§E­1géŸì§ûN[|dÑFÖ¥ŽßÅÖQ5I .Ó§˜ƒ×¦áØŸq_CWã߯øË\ñ…Œž±¾º×m%Y¢’ÉÔžÅØüª§w õ¯Ö6¿'„ôÆñL6°kþHûZYH^-ýðH—8õ=k†¬‡D%̵<ßö¨“oÃ(cã÷º²óìKìµóWƃZŸÅÍWÄCGc&£¡ÙCu 7b«(ÿkŠú?ö«qÿV‹y“Xˆ~QÈjŸÁ4ÝñwÇŽ"‚Þ<úrÿüM~—ÉÑáêÒ]yÿIÂÿ‘|×y/Èü¯¸¡žHäR’#ea‚<ŠP¿-}Eû^ü:ðÖ£â xBâ(Öà“c£ÌdO®F@³Þ¾` ò×ÊTÃV¡Ê´y¶¹áΦí$BF ZÒþ&öõóþ†*¼Õ­?âqaÿ_ÿèb·À+âèÿŠ?š?zžëñíâ‘Óÿë„GùWÏx⾈øü?â•ÓGý;Cý+碼W×q†¸ª?àÿÛ¤zÙÇûäþC1Æ*¼¢­¸ÅW”WÀ³ÆER¼ÕyjÙ«7z’ŠŒ9ª÷Õ“TîK(κl ļ|œV¥ãõ¬IßsšÅ›EMP:Ò5(¢Š—4Sh¬N±ÙÅ_±“¥gU‹GÚئLµGMjý+RÝ«Íòl[7JÞ' XOJ»j¡«ñö®ˆœìê<à/üEÖ£Ò|7¤Üê÷ì7­×!ûÎÇ ‹îÄ û7áüÚÞÛÉÔ>!ê_j~ûLr±i&àŸ¢cýã_$üø©«üñ½ˆ4©[°[›l—¼Œ>œƒØ€kõ“á×Ä 'âw„4ÿhÓ‰¬îÓvÜüÑ¿ñ#zr+*²”vØpI—ü+á ÁZLzfƒ¥Úé6ýØ-"¹õ8ê}IäÖ¼’,Q³»E™˜àÜ“J:Rí` ž=ëˆÜùÓö‹ñLJ¼Q§øbÃH×tíRãûYdxlî’WU8É I$sî)~ø³CðßÄ¿ˆO¬ë6Xšx’1{r‘ÃËœn#=ExçÄoÉðÓöš°¾Ó-|Ÿë+ç[„dRï_2?nyÐûWŠ~Ò“ý§â=ëõi›ózý7M>šOtßþTùò—.‹ô;›ñcy¦Äe1Üi¯¨0r_ñ?0ìW½yŸíðËEøsã©ÃzÍŽ± _îžÕ¬îRcÈÝí<`ž=F+©Ó‡ðv×¾#Çþ:?¼®+Ôâè9að•/üËðƒiñS}âŠÅpjÞˆ›µ›ÿOÿèB aÉ«š®iÀÏÄú¯…ËUñÔ÷ãù£É¥ñÇÕßû@¾ÓWþ`þB¾Ç"½ÿö„ãGÓWÒÚßÿ@àa~júž/ÿz£ÿ^×þ•#ÖÎûlÈœUijÜ•YÆkàÙã"´ƒ©ÍWfªRõ©)ŸY·MÖ´g8‘xýk6Z2o¥Æk œš»&IJ±:c°RŠ@3N  ¢Š(>ŠLæ–²:n±¶×’ŠnØË+rÕ²st¹À®‚Íø­¢rOsrÝ«F.Õ•lÝ+RÅt£•—aé^÷û*þÐSüñp¶¾w“ÂÚ“…½ˆsä·L£Ô`íôàqUÈëG%few¡û[aoªYAyi2\Z΋$RÆr®¤d}«C¥|#û~ÑãC¸ƒÀ$ºÛa3cKº™¸‰ÉÿRO¡ÉÁ'ƒÇp+îêó'fu)s+ž/ûAÇæxƒáðëÿ&þI_Ÿ¿æ4‘ó–bìGÕ«ôã¾Ñâχ¥þè½›?”uð¿Å]ßè×¾/¶e¥ø°ºP²îF>ÄäWé¸V£Ãs¿eÿ§_ùõ¿ÜcêË~Ayð„ ãË`§Fÿ 𛘼™ä®Ö#õ¯vøXßkøk«CÔÄá±ÿÇþÍ^%«GåêW*õ¯_ˆÿ{”a«-“_ù4ý 3%z8y÷‰žÂ¯øj=Þ"ÓG­Âÿ:¤Ã­kx6#7Šô¥9›ÿe5ðÙBæÌpËûñÿÒ‘äÐW«æ]ý¢ÎØ­cþìP)ü#Zð€95î?´Œ êb<ýÙGฯÇ×Ðqc¾.ý{ç&z9þ>¯©Z^µ]ºÕ‰ª»w¯…gŠÓš¤ýM[œõªoÀ5%¢•Óàľ“Ö­ãã5Ïê2àÆF‘FUÃïÔ]h'q&” VgP£Š(¢€ (¢‚B–’Šƒk‹“G>´”P;–l¤Øø®ŽÆLâ¹XÛkƒ]Ÿ.@ª‰C¦µlZ¶íÅaÚ?Jضn+ª'8J»j¡ «ÐšÙ²ý¼¬ˆÅHee8 Ž„ýýh¤ø•áøü3®ÜøI´è€Yówà7»7z“šü抶ü/â-CÂZ펱¥\5¦¡g –“ªŸð# ýiT¦ªFÝB2ågéOÇõóŸúužã×V|±áÞü=×üoá õ>u¯˜"b0%AµÕÇÔ.kÀ|]flõë¤Îw6á‘_¢_´Î’–¾4ð†¬#UK6Ÿ3€lãnOSÃ7ÿ[¿Á?tö¶ñ!\a‰)Ó޽ʒúÿ Fkx(¿ü¸~Zšâ—>]FÊÚýS†=ë¨ø]ho‘=ÍÙóÀigCƒÓåÍ'û¸Ï¯ƒ|3ð²è?õ[þ|Z-ÄЙ1÷„rŸÊ3_-‘Q“̨ù6ÿðßèq`(¹béE÷D?´ظñ €r ÎÃó¯&þî~-^ý«Ä;s “øšá›îŠíâ¹/í9S_f1_ù*©Ž6§µÄÔŸvʲõªíÓµ<§šÕð–‚úî«arŠrkæ0˜Z˜Êñ¡Mk&sB¤”QŠt-BxZd´“ËÄF+àò¬#¨5ï:Õ­ü7¢-¤AKíÆ+Áu ̲;·Rs^Ö}”ÐÊ' Tê9I­|êÂ4åÉsúNµÍê2îlVÕü¸¹Ùß|„×ÇHpD@b–Š*M‚Š( L(¢Š¤ ¢“8ëKQcK…QHaZºdÝ+*¬ÙI²LP‰’º; 93ŠÛµ~svô­ÛGâºbqHÛ·5~YvÍÒ´a5ÐŒ¡ZŽ©ÂjäfµDž‘ðãìßtÖé‚äë_qþÎ8ƒÅ_-±·±·ë þ•ðWÂ[³øïNlã;‡õþ•ôíÆøþ üw¾ƒQDÖnZ;ÉÞ€†%$Ðn9‡=¹ûnWW‡çö…H¿Ôö`ÿØ—”sý¦´Õþ›ÈãëK¹KÈñŒà|­ú5|#ñßJI±¨Dƒlê· Gû]GçŸÊ¿Hõÿ³ø“Dº…g¶¼ˆÀŒ§ †Îþñ/<-´šô8¹²fn4dž?¨®î”+àªà*¿Šÿt—èÒ3ÚÃÐö˜9P{ËUê¿àm¯í‹¯ZëžÔÛL‚Yt­m5Ѥ;g‘ö‘)ã˜ãùÞçšÉøD“Ä^&¾}÷wÒ0óH»9;ãûÏûèWœŸjk¢ÄFDeÿÖz-{¶‹áYu©´/é#cO ŽI¢çï·à£ô÷®ÞÊ+`ëÔÄc}Õ­{o)zY[çäpåôçAÏU|*Ëͽø›ámSI—NÖ/¡híuxLöÄŽ©¸€d{áåàWè—í{ðÛNºø&µ„B|:‘-¾݈mM¿–+ó®c_Ÿfx—ŒÆUÄ¿¶Ûùt_$yxÚ…[w×üÊ–lIàW³xGOxq¯¦P²2îɯ8ðN„Þ ñc1©ÞÿJôŠÚêiZiÖíµ™vàvöÜ/‡† W6¯²M/–ÿ{ÐוR®ýå>4×äÖõId-˜Ô¢¸»Ù85©výk þ\f¿:ÆâªckÏUë&p­uf&§6¬j¹¨Ë¹ñš§^[:¢¬‚Š(¤UŠ(ª°‚Š(¦E&1RSH©°î4ZB(Ɇ-:6ÚàÓ3K@ÎM›*9®ŽÎN•Çist®¢ÆLZÅœ²GClõ§t¬{WéZ7JéG34á5r3T!5v#Z¢¯áìþGŒt¦õ—oæ zGíS|Eosÿ=–93þôJßÖ¼›Ã3ý›_ÓeÎ6Ü'óÇõ¯ký¦`óô}ð¤?î‚Ÿû-}þWûܦ¬;*‹ÿ%Œ¿Fz”½ìEÙ¦}Gû'_Sà_…·;JmÄɸœãk²Ï ãð­ˆÿ ¢ñÅÕô}®-±à¸þµç_°v´—ß oìK%•ë®ßE`ù±¯ ´wy¬ä•Ææ”þÈ_Ð ù<."¦j­'f¤ÂÚ¥z=\|$…tš;T:–öRHç<Ž3Ø×yðÏá5¯€!UDÚ¤¬»¥#”SÆ ç§çè= Ò.Šå×%„™õ ±©nÓíÇ'Ê 1Üã"½¬Fq‹ÄSt%/u½ËÐèT®Ô¤îxßí—­.ðÄ0îKù­­Ó=ó"³ã¨ÕùŸ1ë_tÁBõ¥ÂÞÓ°×W2Ý0¨ýkás\J‘'Þ‘‚Äâ¾^Q•JŠWoO™òùœ¹ñ6]=cྖ–š]ö©(Ã0Â}+Î> k'W×®$ÎQ U¯S»™|'ðìlùDʯô¯¼”»3’NI¯Ñ¸¢QË04rªO×åþr»ùâghS¢º+ýæeãõ®wQ›ÖÍìœæ5Ið ~O&rÅ>ù ¦QEec (¢Šc (¢˜S€ ¢Š(Í4Š}% E%<ŒRR*å‹ vKŠê´ùsŽkŽŒìpk¤Ó&ÈâcQe£ð+bݸÏÙIœVÕ«×TNIð7J½¬È¯ÂÕ²!šÒ˜fŽ@pQƒ~G5ôwÆ8F¯ðD¼>\RF[û¬èuóbr1ë_LiÍÿ ?ìÿýç¶d?÷Ò?ª­}ÿ ITJf×þL¥ù£ÒÁûÔêÓî¿#ý“>0AðÏ^Õmï¤ eyo8]Ëž¿‡ò¯¿<'¨Ûj~±– ógiïŸÖ¿!ʘةꧽÇáoí=«x"Å,o Ï k¶9ÉÇôÿëWÃKš›q} ð8åE{9ì~†iîÑ-r 8⤆HmôdyÝR$„v8ɯ˜4Û3H´Ñ¬cšt8Ñ—à}ó_IøJçIñçƒìµ+¥¾Ò¯­ÆÆCœ‚0A÷¨¥Wݾç±,Â’^î¬üæý®¾'GñâX†Ñ÷éÚDÎ÷³—?ž>˜ÇjòOim«øŠÔd.?Nó'ð®¯ã×ÂýGá'ÄmSE½IÝ¥i¬îdçÏ…‰ÚÙî{pj×Á]|³ê¿*î`ÞÀm©ʾ›…è,^iN£ÕBó-¿òk9â+Þ]YÆ­Mbû› ÜWÐùö¯»~ v?µ_í?_I»*寶:þ¹®òJãâL_Öó*®úGÝ_-ãvcR~Ò£‘‘¨K€k•Ôeß&+wR›×33ï‘|”·4‚ER6 (¢€ Í(Zu ¥¢Š(¢Š(¢Š)¤S¨ V¶•7AéYdf§±.`=ilLµGmc.@­ÛWé\¾.@®‚ÒNorHܺV„-YVíÀ­Z·FLÑŒ×Ñß³µàÖ¼¯hŒw;A E÷‘‘ólm^·û:ø—û ÇQÆíˆçàž¤Gâ }6EYÓÅr¯´šù­WâŽÌÔ+«ìôûÏ7ñE‰ÓuûØHÀ?Ê&½Sö‡ð±ð÷n÷.Ä©ÇO*#^RMežPTqóqøgï/IkùÝõ`éÔ”A×п²7íÿ ½ÄœJÐîcëþ;¿:è~þÓÚ•ÿÁý_ᾦdºÔe‰mtëÆËnΨçý”,ûÛž[ãƤºG„í4ØÎÖ›n¿È~µú Eåø,F:/H®g÷¶—ª=Š6…•úì¯çi¥y嘖'ÜÖ ô¼Ô»“ƒ\þ£.¯Îg'&ä÷g—`ê³ðß•cUËù7ËŠ«\ÇTUÚ\u&Ú)h Š( Š( Š( Š( Š( •NÖÒ’Šèô¹¸×Ke'Jâ´©±é]]„¹´‹9dŽ’Õø£V5¬+R®„`iÄÕ¯áýUômbÎõ Ž=;þ•‡U¤jé£VTg‘Ý;’Ñõ'Æ]/ü9Ó5ûp$x£ÊG°ÊËŠùRUhÝ‘† œ_LþΞ.·×´k¿ êN r§–»ýòGÐבü]øsàÿ\«DBçŽìE}îcAf˜ס¬©ëë¿þÿÓįmâ#èýOø‡‹´k–·Ô!¸2õùdB~hتWÔ`_¡gŸð”ÓËâýçdþOš_ù5‘ëâ£J>lãå:ÂE'RÑÉ©U’¼bßÈ‚šM9Ñ“†R>´ÊÒ-=QÏ$ã£V (¤ÝTbعÅ!j@2iÁ*ÉlmÓöѶ‚n7´¸¥ @†š]µ J]” äx£&ÚiZ0ÒSJh¦†hÆjE¨ã©”f¸Ñë6(Z6T€fžªÄ\‡e'—V6RùtìMʆ:iŽ®© Tì.b‘Úšc«¦*O/Ú‹ÌPhª6ŠÐh¸éQ4Gì.c4#3…PY‰À½túF…ghR]FAÏ$cpQì;šÍÒ£XK—ÙÂýj¦¥-þ¥Ì*c„“û×ákÅÅÖ”¥ì ìºÿ‘ïá~¯ƒ¤±X‹6öLë|EãÛ°iv&ц¸º—,ßE â®|U“‚*¨ÑáS™K\?÷œà~B¦ŽÊžD?Œj¥²þUþdbsʸ‰s(¤¼’_‘^Mm&ïU^ô•9ö­7Ó­‡µŒû§ÈJ…¼*·@›)Îïùå/_ήP–Þz.ý&¦a«VZwèGm:\®Tò:J~Þkhît[ݳFѺŸ™Oq[qºÊŠãFkÕ£UUÑÅ4–±wLr.MKåÓ q«Ut6Uòé U¯+Ú˜é@¶ÓÕ)Áy©ã4Ñ…=ªÉALdÅ2nW+Q°« * ¢¦Óž›B)°œÕ”ªpµ\ˆ×"=9 ©@¦Æ*e\Õ™6 ZpŽ¤U§„«HͲ..­éB{UXŽb§•Hb«ž]U;äQhøéP4U¨aâ«´X¢Äó[cµÅ˜Çö„¸9R½E}uû/x,h¢ÞãKˆº¯7 Ÿ5›Ô·ôåúÏÀMSÂêWÚ€Ô,W%tëõ(<ð¤ò>¹¯’Âû*8©â"þ#Ò«Ãõ©â%‹oâI[µ¯þg†ÎŸ5-´y&ºOhÓéqæïH—L»Cóªåâ÷Oo¡¬KXH,J‘Ô‚+ë)ÔExž]Jr¦ùdBÑóÒšSÒ¤s4÷iiio%Õ܇ K¹áýkÐ|9û7xŸÄ±ý£S¸M©û¡æ#Žçß±¬jâiÑѽN¼> ¶#X­áÿˆ´ßêñ\ßÞEmw9fnÀóúWñÅÚn©ãMRïKßso-Ä À±#ŠúÇöXðíŒð4Ë>§4d<é7+€yÈé^_ñg áÏÈ-ôÅÓôùŒ {QW<jùÚpLÃÛÅ;µ¿C›xlLjÎ ékôùõ9}žëOŽY"0»Q†«*Äb!ô¥xëëR²1oR„‹ÅQ™rqZ’®+=Æ\Ô²C5on lô«&*’%•]j´¢®H8ª“qHh¥1ÅP˜ÕÙÍgÊrÕ‘BQH:RÐhX«vïU*X \¨ôe±± «°Öu»p+B Ù’-Æ*Â-A[ŒV¨Á±êµ*¦isS¢V‰65c§ìÅH«O V‘›d>^kêoÙëG‹Lð4^Z¤×NîÌ,72~€WÌA}5ðZÓ£û­c {1Åy9¢~Å%Ü÷ò9F8¦åÛüNñÖvþ»º¹aÙ÷Aîk㿈ÿ5O ë!íà’]?Ì+æ4eGZúâTSë^º¶¶¤Åw!Þ+âßë×hºUÝɼü³»,`óÓôÏzùÚÚ•Þ§Ñf¸×hBw}Ï£´ÙüGðôRÅŒ •W”øûLø™¤‰0·* ?‹85Ó|ð•î…á%Ú:y§åV}=Kãà‡Äúsà(]óÙwßʽ¬,£ Ú'Åâ+Ƽ”[Ô÷O…ô?i–÷mn³ên€Íq å_Èvÿ‹Ÿ¬¼ioæòÊÛV4Æs]trˈÆcòøü«â¿ÚXÔô߈{ØžâÎ,±¸%y¯*Uê9IÜûyã(apê—’=»Â?­5ëà‹˜§˜ØòE[ø¶ž(°xn-Ñ° Rzƒ^á-Vß[ñf›>•oi·¡R½1kÚu›½Ñàõéø×uÚI¥c¯ˆuh·3À¥·ò$t#X®>† t­½uPê×e>ï˜k*E¯©Z¤Ï˜3nª ™zкà«sPÊE‹hûÓä^ M mLÓ%D”dèj”æ¯KÞ³î3RÊF}ÃuªäÕ›§ªÝª ¢*ÒÒ--)Tí`i™4d×5@Õµ|ŠÔ·5‰g%kÛ7JÖ',Í(ªìuF‚¯E[£™–cZ°‹QD*ŠÑ¶8 .ijuZÕ60&+ÐþxÞ-#ap6#ÈYe'ƒœp}=A÷5Á*TŠ•Z1­YJ´¨ÏžŸZè6o¨BÓü­ò‚ˆ{jÐÕ>h×zZꎶÍt¥YP€[v3œ~_|Çቚç…n¬í!¸óìI#È›$/û§¨®ÇÄŸ´MÅÄ–:J­Ì©ûÉn. ¦pz(úu5𸼻ëòRjß¡ÏŽ©™â ªA®[ÏŠ&ÓômKé™ ¶‰7OÇ°ú“ÀîkåoÄíâíjçQ˜# åÃyT2}s“øÖ—>!ëž2ºÚ•Ò›8¼V°Æ5b:ñÉ>ìIëë\¦†Ÿèïÿ]ù×·—aåFoÚ;³zX)aè*ÕeyKðGÜ âYíű×5BeëZ2/Fà`WÒZÊÆ2/=*8$Sî¾gÅKmH¬ú—б·lb«ËWeªSVÉ(Lp eÝ7ZѸ8‘vøÏ5“4‰Ÿ;nzŽ•ŽM%I¸«KH½)hZ(¢¹Îâ{WÃâ¶m_ŠÁFÚÀÖ½œ™«‰CrÜð*ü³-› V•¹é]8¤_‹¥YAU¢éVÓ ­¢bÉ£Z™W4ÈÅN‹Z£*­H©J‹RªÕÊWCeÝ“Ó\~†¡ñ(λbÞªGéVµ5Ú-›Òeªþ"Õtö÷ÇèkÏž˜¸öië~OüŒk˜ ½¸aÛÊ«hKû™Gý45²±†»¼ºƒúVnŠ›c›þºšÂ‹ÿhš7Å+a)KÐÑ ŠR)ê¼PËÅzv<2=<ËéaA<~¡®VáÏyó­íÓ¯Ÿý¦¬Ý 1a»y‰ýkŽŽ³g§‰\´áèXqY÷\ Òu¬ËÓ€k©žr1äù¥5zÊ>Aªj79úÖ¥ªmŒšÍ29ûÖ}ÉÀ5~sY·F›t؉xù8­KÇëX“¾ç5‹6Š"<š( u¤j8QE.h¦ÑXc³Š¿c'JΫµ±L™jŽšÕúV¥»V›ä ضn•¼N°ž•v>ÕBWãí]9Ùj1œU„Uf1Z£&J‹S*ÓPTʵh‚Ž°¸µCé*:©¯ÿÇöšÚ¡¬¯üKœú2ŸüxU wþ>4Óþد:·ûÄ}?SÚ¡®~¿¡]üL®×Ö5#üþ£t¹_Iò«·»ï@?™¬Ý,m¸½_úkýaM[3zîø LÒQC ‘Šlƒšõu¢<5< n5GHf™ºæ¯Ü7•á#Û1Ô6‘ùv/¢å^~^fzù»É")Ecê …5±7zÃÔ[µvHòâTrÕ¬«¶!T,ãËZS|«j”6gÜʺnµ¥pÝkñúÔ²‘“}.3YäÕÛù2HªU‰Ó‚” RšuQ@1ôRg4µ‘Óp¥¶¸4”P#vÆ\[–­+˜Ó¥ÎtoÅm’{›–íZ1v¬«féZ+¥¬»J·ªqUÈëTbË1Š°‚¡Ž¬ ­ *ë ÿɾ€þ¢³u¡™4ÓÿMµuqÿ«¯÷ ¬½cîiçþš/ó¯6¿ñà{8o÷Jˆl£¼^ñúÖe‚mÔoGûJJÖºù5;3Ž:ÿ#Y°/—­Ý¡þ%SúšÍ+bßõÐÖO›/“ýM% Šëˆ\ûzU}C‹Y}Ö½¢¬Ké0 jÞ?Ïê2àR&(ʸ}ò‹­î$ÒŠÌêqEPEPHRÒQPmqrhçÖ’ŠrÍ”›ÑØÉœW+mpk ÓåÈQ1¨tÖ­+Vݸ¬;Gé[ÍÅuD㑧éWaíT!5z[#]Ž¬%WŠ¬ÇZ’Eªø–]㯔ßʱõnmlOý4Oæ+rùwé÷#Ö6þU…¨üÚm“¶ŸÌW‰Ò¬ëá5ÃÕ^„Ú‚â[7þìÀ~`ŠÏºO+Ä+Ø\؉—Í…5Áø£Zû ‘¶³ ±ž•ÚjÓ¡v'A$׊x¯Qk‰¤ryc\øÊ–J viƒ‚»«-£ù›Zf¦—Xš×ŽêH¤U'(J‹ÀÞ6: ÞÜ.f¹ù‘Hû©ÛóëR^Ä ,:È5âT¥<4”ÑôøzÑÆÒp‘yîw& ɬ-F]ÍŠ¼®e„õ“;”潪uUD|Ý\;£=v"´QZ™Q@˜QEHAE&qÖ–¢Æ— (¢ÂµtɺVUY²“d˜¡%tvrg·jü æì%é[¶ÅtÄâ‘·njü&²í›¥hÂk¡3B*µS„ÕÈÍj‰$•w[È=TŠç.~mÕm§õ®™FF=«š•?âÇ÷2?#\¯Š õ°:¬|Zøsá¡q¡êW“ ?j­¢ :®>cøœÀ×”ø¦Õ£Ò‘Ø~ò݆~ªyþUôW†aX¼7¤Æ£ -Ññ¯/ñç‡R=GQùs2äq–êãüëÁ…gW6ÿ«WS 8:p]¬ý^¿™ÄFÁãVÍQ‰„úßvÇây?ÒªiššÚÚ½¤€ý¢UTÿíZÓn/®(W}ÍÌ›Wê¥z¸ªÊPPOÈùì¿(T•i­#¢óf¿ö$Ñé+«°>UÌ­ûà~gwåY7­{/Š´¨l<l“mTRçñþµâ÷'Õà«{jOɘ昫Ö^i?ŸS”ñuÁ[6‰~ôŸË½yE®”þ ñ=¥†Ö|È}rOå^¾4‰|Gª}ž!Ì!SØwcøJÄðV“Ö5mYS—6ðdäÿì¿­s8ºø‹ôZ'ì0ª=^§IvŠ–áD;\V©™¤<}ÓÀ®Òí¸>õÌ_[·jéÄSU"a„¬èÍk¡›ÙÈÀëÍeLÁäb:U½B|þíxêra¨ºKÞ=,f*5ÚPØ(¢Šì<Ë…QUaQLŠLb¤¦‘SaÜh4´„Q’) ZtmµÁ¦f–›6Ts]œ+ŽÒæè3]EŒ™µ‹9dŽ†ÙëNéXö¯Òµ n•ÒŽfiÂjäf¨BjìFµDÐÖ•>ö,}Ùcñ&·Ö•‹›øÿ½‡ˆÿëW-{‰ög¥—?Þ8÷Gºø*à\øGG—Žm"ÿÐFiºÆŽšÅ¶ì*;sùúVg»Ÿ´xOÉËE¾#íµˆ ÑÀÐã'ºî??Ö¾:MÓªä·LýŸ-ZŒ¶qÿ#Í|Mð›O¾x5½ò[=E—ØKoòŒƒ–Ž@H õÃm ž3ŠÛðg#ð´ÑO9]Ÿc‘<z“ë]FÜXFsŸÝŽø©/‰Û»¡7õ­ªbeSì¥}ìsÒÂF’ÖMÛTžÉœÄ©Å·‡.Ó82:(ŽOò¯Ô§[É!çhÎ+×¾0O²ÖÎ!Æù ÀõëÇgˆê•µ¢Œ‚ÞcýO×ùWµ‚~Ë çßþùlÍ’ "’žF))rÅ„»%ÅuZ|¹Ç5ÇFv85Òi“d q1¨Ž²Ñø±nÜ çì¤Î+jÕëª'$x¥^ˆÖd WájÙËÑšŠDÅú7i¡úŽGó4èÍ:a•WyáýjjÇž áê{*±‘Øü!Õ–+MgKf>d”ì0ÁýGë^"l·Ç÷W¥|ë¨ÞOáírÛQ·‘£GýÜ…X€ÈHàã¨ÈW»è~&²ñ.”ÓC…¹? CàŽ‡o©xŠm{Uv‘§FÚ…Ðn†>V<ú»mAîõÈkW3ëz‘· ¾k‡/3ÀžŸò¯Mñ‚øOð¬ºÔõMš†¦:4qûˆO¦A2þÒzWÓÓ¦—-´u~§ÅÊ«µLd÷ž‹Ðóïë—^&×u=jù÷Þjq#{±'nkž»~ h\¶cÞI]Ìð–®æF¡.®WQ—|˜­ÝJl\ÌϾF5Ï-Θ!”QE#`¢Š(  Ò…§PŠZ( Š( Š( šE:ŠekiSt•–Fj{òæÖ–ÄËTvÖ2ä ݵ~•ËéÒä è-$àVñg$È¥hBÕ•nÜ Ð…«tdÍÍXSTãj²†µ%‹}§ [L’ eÐ|¾â¹Í/Qk<ÙÝåJp®‘®¢šÔá…Iy Ùkì$‰ÒÞë¼Npèk†p9sÒ×Èõ©U¥ˆ‚¥]Ù­˜§ÆZßØ ¢ëWÿc+³ÉO³o¦3ŒW'¨êb1¶K3 ãë]2|-Õµ9Ö;;$…H夹@ŸRÌ@‰®×Aøsàï‡[u/jðkwÈ»âðþ7˜dnÂk…Ê"úì,ݾSÈËÚÖ¨­[ÔèxL5ÍRª’캙Ÿ <má=ü{âh•ì"­¤ÃFè „¼jv—=1…êÕÃø‹[»ñ¯y©ßÌ×—r´ÒÈÝY‰É®âÄ CǺ”Wi ­­´b ; DòൈB"öŸrI$’I®&wë]4éªQåGˆÄ›WÁ:€­ {3ðº¡r1îå¿ Æ6I÷9ø»¢Ç`KÀCðbð#„¬ `ñfþ¼,,ƒuyžn¥›æXOie× 'rO·…9† ¬3°žÀœ}SRLàU±ç•žUk‘ 20äà¶Sൿ\©ü£ÚÌÀÞ! ±fcð¤0RðXð3àÆ{Lt«/~™Š/‚!‚M”"Í'°‰6_²ÇúZÉ%eï•}“*¶Œs0W[ۙǺ¿`¥.̲UD5dEòCsç30Êù“`êWŠGYFK"l McpÞ„‚¯¢ {—‘Bð®b[N‰he:¶M­'plb98dˆ?<‚AúDMe-‚P*ÎBãÁæ$¸„Ú.iYP5^X©¤µô£Ô”’LCÒ\t;k¥jZR…ª ð CõÚÝÃÓ–f² ?±P'Y½ºÁí@T!‡îæƃå^L­1ù˜ãîx1×óNÀ²ã¾ÎÙAWU;Çr ˵ރvðß‚áo›kÁmȧ‹*¤ÊxçŽoÿ‰ýs„~!`×æÐþ¥/|ôßÒÿ0æ7¶O?‰+Nͬ¿Ïrž~==Óš+ä­àÙ°_¿Ñó—Kö½úÏoŒÞjFp8 IEND®B`‚vigor-0.016.orig/db/0040755000076400007640000000000007103707223012657 5ustar cjw44cjw44vigor-0.016.orig/db/include/0040755000076400007640000000000007103707222014301 5ustar cjw44cjw44vigor-0.016.orig/db/include/db.h0100644000076400007640000002175307103707222015044 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)db.h 8.7 (Berkeley) 6/16/94 */ #ifndef _DB_H_ #define _DB_H_ #include #ifdef __DBINTERFACE_PRIVATE #include "config.h" #include "port.h" #endif /* * XXX * We don't want to collide with an existing DB implementation in the * local libraries. Some of them have diverged, and we don't include * the hash routines in any case. */ #define __bt_close nvi__bt_close #define __bt_cmp nvi__bt_cmp #define __bt_defcmp nvi__bt_defcmp #define __bt_defpfx nvi__bt_defpfx #define __bt_delete nvi__bt_delete #define __bt_dleaf nvi__bt_dleaf #define __bt_dmpage nvi__bt_dmpage #define __bt_dnpage nvi__bt_dnpage #define __bt_dpage nvi__bt_dpage #define __bt_dump nvi__bt_dump #define __bt_fd nvi__bt_fd #define __bt_free nvi__bt_free #define __bt_get nvi__bt_get #define __bt_new nvi__bt_new #define __bt_open nvi__bt_open #define __bt_pgin nvi__bt_pgin #define __bt_pgout nvi__bt_pgout #define __bt_put nvi__bt_put #define __bt_ret nvi__bt_ret #define __bt_search nvi__bt_search #define __bt_seq nvi__bt_seq #define __bt_setcur nvi__bt_setcur #define __bt_split nvi__bt_split #define __bt_stat nvi__bt_stat #define __bt_sync nvi__bt_sync #define __dbpanic nvi__dbpanic #define __ovfl_delete nvi__ovfl_delete #define __ovfl_get nvi__ovfl_get #define __ovfl_put nvi__ovfl_put #define __rec_close nvi__rec_close #define __rec_delete nvi__rec_delete #define __rec_dleaf nvi__rec_dleaf #define __rec_fd nvi__rec_fd #define __rec_fmap nvi__rec_fmap #define __rec_fpipe nvi__rec_fpipe #define __rec_get nvi__rec_get #define __rec_iput nvi__rec_iput #define __rec_open nvi__rec_open #define __rec_put nvi__rec_put #define __rec_ret nvi__rec_ret #define __rec_search nvi__rec_search #define __rec_seq nvi__rec_seq #define __rec_sync nvi__rec_sync #define __rec_vmap nvi__rec_vmap #define __rec_vpipe nvi__rec_vpipe #define dbopen nvidbopen #define mpool_close nvimpool_close #define mpool_filter nvimpool_filter #define mpool_get nvimpool_get #define mpool_new nvimpool_new #define mpool_open nvimpool_open #define mpool_put nvimpool_put #define mpool_stat nvimpool_stat #define mpool_sync nvimpool_sync #define RET_ERROR -1 /* Return values. */ #define RET_SUCCESS 0 #define RET_SPECIAL 1 #define MAX_PAGE_NUMBER 0xffffffff /* >= # of pages in a file */ typedef u_int32_t pgno_t; #define MAX_PAGE_OFFSET 65535 /* >= # of bytes in a page */ typedef u_int16_t indx_t; #define MAX_REC_NUMBER 0xffffffff /* >= # of records in a tree */ typedef u_int32_t recno_t; /* Key/data structure -- a Data-Base Thang. */ typedef struct { void *data; /* data */ size_t size; /* data length */ } DBT; /* Routine flags. */ #define R_CURSOR 1 /* del, put, seq */ #define __R_UNUSED 2 /* UNUSED */ #define R_FIRST 3 /* seq */ #define R_IAFTER 4 /* put (RECNO) */ #define R_IBEFORE 5 /* put (RECNO) */ #define R_LAST 6 /* seq (BTREE, RECNO) */ #define R_NEXT 7 /* seq */ #define R_NOOVERWRITE 8 /* put */ #define R_PREV 9 /* seq (BTREE, RECNO) */ #define R_SETCURSOR 10 /* put (RECNO) */ #define R_RECNOSYNC 11 /* sync (RECNO) */ typedef enum { DB_BTREE, DB_HASH, DB_RECNO } DBTYPE; /* * !!! * None of this stuff is implemented yet. The only reason that it's here * is so that the access methods can skip copying the key/data pair when * the DB_LOCK flag isn't set. */ #define DB_LOCK 0x2000 /* Do locking. */ #define DB_SHMEM 0x4000 /* Use shared memory. */ #define DB_TXN 0x8000 /* Do transactions. */ /* Access method description structure. */ typedef struct __db { DBTYPE type; /* Underlying db type. */ int (*close) __P((struct __db *)); int (*del) __P((const struct __db *, const DBT *, u_int)); int (*get) __P((const struct __db *, const DBT *, DBT *, u_int)); int (*put) __P((const struct __db *, DBT *, const DBT *, u_int)); int (*seq) __P((const struct __db *, DBT *, DBT *, u_int)); int (*sync) __P((const struct __db *, u_int)); void *internal; /* Access method private. */ int (*fd) __P((const struct __db *)); } DB; #define BTREEMAGIC 0x053162 #define BTREEVERSION 3 /* Structure used to pass parameters to the btree routines. */ typedef struct { #define R_DUP 0x01 /* duplicate keys */ u_long flags; u_int cachesize; /* bytes to cache */ int maxkeypage; /* maximum keys per page */ int minkeypage; /* minimum keys per page */ u_int psize; /* page size */ int (*compare) /* comparison function */ __P((const DBT *, const DBT *)); size_t (*prefix) /* prefix function */ __P((const DBT *, const DBT *)); int lorder; /* byte order */ } BTREEINFO; #define HASHMAGIC 0x061561 #define HASHVERSION 2 /* Structure used to pass parameters to the hashing routines. */ typedef struct { u_int bsize; /* bucket size */ u_int ffactor; /* fill factor */ u_int nelem; /* number of elements */ u_int cachesize; /* bytes to cache */ u_int32_t /* hash function */ (*hash) __P((const void *, size_t)); int lorder; /* byte order */ } HASHINFO; /* Structure used to pass parameters to the record routines. */ typedef struct { #define R_FIXEDLEN 0x01 /* fixed-length records */ #define R_NOKEY 0x02 /* key not required */ #define R_SNAPSHOT 0x04 /* snapshot the input */ u_long flags; u_int cachesize; /* bytes to cache */ u_int psize; /* page size */ int lorder; /* byte order */ size_t reclen; /* record length (fixed-length records) */ u_char bval; /* delimiting byte (variable-length records */ char *bfname; /* btree file name */ } RECNOINFO; #ifdef __DBINTERFACE_PRIVATE /* * Little endian <==> big endian 32-bit swap macros. * M_32_SWAP swap a memory location * P_32_SWAP swap a referenced memory location * P_32_COPY swap from one location to another */ #define M_32_SWAP(a) { \ u_int32_t _tmp = a; \ ((char *)&a)[0] = ((char *)&_tmp)[3]; \ ((char *)&a)[1] = ((char *)&_tmp)[2]; \ ((char *)&a)[2] = ((char *)&_tmp)[1]; \ ((char *)&a)[3] = ((char *)&_tmp)[0]; \ } #define P_32_SWAP(a) { \ u_int32_t _tmp = *(u_int32_t *)a; \ ((char *)a)[0] = ((char *)&_tmp)[3]; \ ((char *)a)[1] = ((char *)&_tmp)[2]; \ ((char *)a)[2] = ((char *)&_tmp)[1]; \ ((char *)a)[3] = ((char *)&_tmp)[0]; \ } #define P_32_COPY(a, b) { \ ((char *)&(b))[0] = ((char *)&(a))[3]; \ ((char *)&(b))[1] = ((char *)&(a))[2]; \ ((char *)&(b))[2] = ((char *)&(a))[1]; \ ((char *)&(b))[3] = ((char *)&(a))[0]; \ } /* * Little endian <==> big endian 16-bit swap macros. * M_16_SWAP swap a memory location * P_16_SWAP swap a referenced memory location * P_16_COPY swap from one location to another */ #define M_16_SWAP(a) { \ u_int16_t _tmp = a; \ ((char *)&a)[0] = ((char *)&_tmp)[1]; \ ((char *)&a)[1] = ((char *)&_tmp)[0]; \ } #define P_16_SWAP(a) { \ u_int16_t _tmp = *(u_int16_t *)a; \ ((char *)a)[0] = ((char *)&_tmp)[1]; \ ((char *)a)[1] = ((char *)&_tmp)[0]; \ } #define P_16_COPY(a, b) { \ ((char *)&(b))[0] = ((char *)&(a))[1]; \ ((char *)&(b))[1] = ((char *)&(a))[0]; \ } #endif DB *dbopen __P((const char *, int, int, DBTYPE, const void *)); #ifdef __DBINTERFACE_PRIVATE DB *__bt_open __P((const char *, int, int, const BTREEINFO *, int)); DB *__hash_open __P((const char *, int, int, const HASHINFO *, int)); DB *__rec_open __P((const char *, int, int, const RECNOINFO *, int)); void __dbpanic __P((DB *dbp)); #endif #endif /* !_DB_H_ */ vigor-0.016.orig/db/include/mpool.h0100644000076400007640000000761707103707222015610 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)mpool.h 8.2 (Berkeley) 7/14/94 */ #include /* * The memory pool scheme is a simple one. Each in-memory page is referenced * by a bucket which is threaded in up to two of three ways. All active pages * are threaded on a hash chain (hashed by page number) and an lru chain. * Inactive pages are threaded on a free chain. Each reference to a memory * pool is handed an opaque MPOOL cookie which stores all of this information. */ #define HASHSIZE 128 #define HASHKEY(pgno) ((pgno - 1) % HASHSIZE) /* The BKT structures are the elements of the queues. */ typedef struct _bkt { CIRCLEQ_ENTRY(_bkt) hq; /* hash queue */ CIRCLEQ_ENTRY(_bkt) q; /* lru queue */ void *page; /* page */ pgno_t pgno; /* page number */ #define MPOOL_DIRTY 0x01 /* page needs to be written */ #define MPOOL_PINNED 0x02 /* page is pinned into memory */ u_int8_t flags; /* flags */ } BKT; typedef struct MPOOL { CIRCLEQ_HEAD(_lqh, _bkt) lqh; /* lru queue head */ /* hash queue array */ CIRCLEQ_HEAD(_hqh, _bkt) hqh[HASHSIZE]; pgno_t curcache; /* current number of cached pages */ pgno_t maxcache; /* max number of cached pages */ pgno_t npages; /* number of pages in the file */ u_long pagesize; /* file page size */ int fd; /* file descriptor */ /* page in conversion routine */ void (*pgin) __P((void *, pgno_t, void *)); /* page out conversion routine */ void (*pgout) __P((void *, pgno_t, void *)); void *pgcookie; /* cookie for page in/out routines */ #ifdef STATISTICS u_long cachehit; u_long cachemiss; u_long pagealloc; u_long pageflush; u_long pageget; u_long pagenew; u_long pageput; u_long pageread; u_long pagewrite; #endif } MPOOL; MPOOL *mpool_open __P((void *, int, pgno_t, pgno_t)); void mpool_filter __P((MPOOL *, void (*)(void *, pgno_t, void *), void (*)(void *, pgno_t, void *), void *)); void *mpool_new __P((MPOOL *, pgno_t *)); void *mpool_get __P((MPOOL *, pgno_t, u_int)); int mpool_put __P((MPOOL *, void *, u_int)); int mpool_sync __P((MPOOL *)); int mpool_close __P((MPOOL *)); #ifdef STATISTICS void mpool_stat __P((MPOOL *)); #endif vigor-0.016.orig/db/recno/0040755000076400007640000000000007103707222013764 5ustar cjw44cjw44vigor-0.016.orig/db/recno/extern.h0100644000076400007640000000522207103707222015440 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)extern.h 8.3 (Berkeley) 6/4/94 */ #include "../btree/extern.h" int __rec_close __P((DB *)); int __rec_delete __P((const DB *, const DBT *, u_int)); int __rec_dleaf __P((BTREE *, PAGE *, u_int32_t)); int __rec_fd __P((const DB *)); int __rec_fmap __P((BTREE *, recno_t)); int __rec_fout __P((BTREE *)); int __rec_fpipe __P((BTREE *, recno_t)); int __rec_get __P((const DB *, const DBT *, DBT *, u_int)); int __rec_iput __P((BTREE *, recno_t, const DBT *, u_int)); int __rec_put __P((const DB *dbp, DBT *, const DBT *, u_int)); int __rec_ret __P((BTREE *, EPG *, recno_t, DBT *, DBT *)); EPG *__rec_search __P((BTREE *, recno_t, enum SRCHOP)); int __rec_seq __P((const DB *, DBT *, DBT *, u_int)); int __rec_sync __P((const DB *, u_int)); int __rec_vmap __P((BTREE *, recno_t)); int __rec_vout __P((BTREE *)); int __rec_vpipe __P((BTREE *, recno_t)); vigor-0.016.orig/db/recno/rec_delete.c0100644000076400007640000001260607103707222016225 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)rec_delete.c 8.7 (Berkeley) 7/14/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include "recno.h" static int rec_rdelete __P((BTREE *, recno_t)); /* * __REC_DELETE -- Delete the item(s) referenced by a key. * * Parameters: * dbp: pointer to access method * key: key to delete * flags: R_CURSOR if deleting what the cursor references * * Returns: * RET_ERROR, RET_SUCCESS and RET_SPECIAL if the key not found. */ int __rec_delete(dbp, key, flags) const DB *dbp; const DBT *key; u_int flags; { BTREE *t; recno_t nrec; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } switch(flags) { case 0: if ((nrec = *(recno_t *)key->data) == 0) goto einval; if (nrec > t->bt_nrecs) return (RET_SPECIAL); --nrec; status = rec_rdelete(t, nrec); break; case R_CURSOR: if (!F_ISSET(&t->bt_cursor, CURS_INIT)) goto einval; if (t->bt_nrecs == 0) return (RET_SPECIAL); status = rec_rdelete(t, t->bt_cursor.rcursor - 1); if (status == RET_SUCCESS) --t->bt_cursor.rcursor; break; default: einval: errno = EINVAL; return (RET_ERROR); } if (status == RET_SUCCESS) F_SET(t, B_MODIFIED | R_MODIFIED); return (status); } /* * REC_RDELETE -- Delete the data matching the specified key. * * Parameters: * tree: tree * nrec: record to delete * * Returns: * RET_ERROR, RET_SUCCESS and RET_SPECIAL if the key not found. */ static int rec_rdelete(t, nrec) BTREE *t; recno_t nrec; { EPG *e; PAGE *h; int status; /* Find the record; __rec_search pins the page. */ if ((e = __rec_search(t, nrec, SDELETE)) == NULL) return (RET_ERROR); /* Delete the record. */ h = e->page; status = __rec_dleaf(t, h, e->index); if (status != RET_SUCCESS) { mpool_put(t->bt_mp, h, 0); return (status); } mpool_put(t->bt_mp, h, MPOOL_DIRTY); return (RET_SUCCESS); } /* * __REC_DLEAF -- Delete a single record from a recno leaf page. * * Parameters: * t: tree * index: index on current page to delete * * Returns: * RET_SUCCESS, RET_ERROR. */ int __rec_dleaf(t, h, index) BTREE *t; PAGE *h; u_int32_t index; { RLEAF *rl; indx_t *ip, cnt, offset; u_int32_t nbytes; char *from; void *to; /* * Delete a record from a recno leaf page. Internal records are never * deleted from internal pages, regardless of the records that caused * them to be added being deleted. Pages made empty by deletion are * not reclaimed. They are, however, made available for reuse. * * Pack the remaining entries at the end of the page, shift the indices * down, overwriting the deleted record and its index. If the record * uses overflow pages, make them available for reuse. */ to = rl = GETRLEAF(h, index); if (rl->flags & P_BIGDATA && __ovfl_delete(t, rl->bytes) == RET_ERROR) return (RET_ERROR); nbytes = NRLEAF(rl); /* * Compress the key/data pairs. Compress and adjust the [BR]LEAF * offsets. Reset the headers. */ from = (char *)h + h->upper; memmove(from + nbytes, from, (char *)to - from); h->upper += nbytes; offset = h->linp[index]; for (cnt = &h->linp[index] - (ip = &h->linp[0]); cnt--; ++ip) if (ip[0] < offset) ip[0] += nbytes; for (cnt = &h->linp[NEXTINDEX(h)] - ip; --cnt; ++ip) ip[0] = ip[1] < offset ? ip[1] + nbytes : ip[1]; h->lower -= sizeof(indx_t); --t->bt_nrecs; return (RET_SUCCESS); } vigor-0.016.orig/db/recno/rec_get.c0100644000076400007640000001626507103707222015547 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)rec_get.c 8.9 (Berkeley) 8/18/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include #include #include "recno.h" /* * __REC_GET -- Get a record from the btree. * * Parameters: * dbp: pointer to access method * key: key to find * data: data to return * flag: currently unused * * Returns: * RET_ERROR, RET_SUCCESS and RET_SPECIAL if the key not found. */ int __rec_get(dbp, key, data, flags) const DB *dbp; const DBT *key; DBT *data; u_int flags; { BTREE *t; EPG *e; recno_t nrec; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* Get currently doesn't take any flags, and keys of 0 are illegal. */ if (flags || (nrec = *(recno_t *)key->data) == 0) { errno = EINVAL; return (RET_ERROR); } /* * If we haven't seen this record yet, try to find it in the * original file. */ if (nrec > t->bt_nrecs) { if (F_ISSET(t, R_EOF | R_INMEM)) return (RET_SPECIAL); if ((status = t->bt_irec(t, nrec)) != RET_SUCCESS) return (status); } --nrec; if ((e = __rec_search(t, nrec, SEARCH)) == NULL) return (RET_ERROR); status = __rec_ret(t, e, 0, NULL, data); if (F_ISSET(t, B_DB_LOCK)) mpool_put(t->bt_mp, e->page, 0); else t->bt_pinned = e->page; return (status); } /* * __REC_FPIPE -- Get fixed length records from a pipe. * * Parameters: * t: tree * cnt: records to read * * Returns: * RET_ERROR, RET_SUCCESS */ int __rec_fpipe(t, top) BTREE *t; recno_t top; { DBT data; recno_t nrec; size_t len; int ch; u_char *p; if (t->bt_rdata.size < t->bt_reclen) { t->bt_rdata.data = t->bt_rdata.data == NULL ? malloc(t->bt_reclen) : realloc(t->bt_rdata.data, t->bt_reclen); if (t->bt_rdata.data == NULL) return (RET_ERROR); t->bt_rdata.size = t->bt_reclen; } data.data = t->bt_rdata.data; data.size = t->bt_reclen; for (nrec = t->bt_nrecs; nrec < top;) { len = t->bt_reclen; for (p = t->bt_rdata.data;; *p++ = ch) if ((ch = getc(t->bt_rfp)) == EOF || !--len) { if (ch != EOF) *p = ch; if (len != 0) memset(p, t->bt_bval, len); if (__rec_iput(t, nrec, &data, 0) != RET_SUCCESS) return (RET_ERROR); ++nrec; break; } if (ch == EOF) break; } if (nrec < top) { F_SET(t, R_EOF); return (RET_SPECIAL); } return (RET_SUCCESS); } /* * __REC_VPIPE -- Get variable length records from a pipe. * * Parameters: * t: tree * cnt: records to read * * Returns: * RET_ERROR, RET_SUCCESS */ int __rec_vpipe(t, top) BTREE *t; recno_t top; { DBT data; recno_t nrec; indx_t len; size_t sz; int bval, ch; u_char *p; bval = t->bt_bval; for (nrec = t->bt_nrecs; nrec < top; ++nrec) { for (p = t->bt_rdata.data, sz = t->bt_rdata.size;; *p++ = ch, --sz) { if ((ch = getc(t->bt_rfp)) == EOF || ch == bval) { data.data = t->bt_rdata.data; data.size = p - (u_char *)t->bt_rdata.data; if (ch == EOF && data.size == 0) break; if (__rec_iput(t, nrec, &data, 0) != RET_SUCCESS) return (RET_ERROR); break; } if (sz == 0) { len = p - (u_char *)t->bt_rdata.data; t->bt_rdata.size += (sz = 256); t->bt_rdata.data = t->bt_rdata.data == NULL ? malloc(t->bt_rdata.size) : realloc(t->bt_rdata.data, t->bt_rdata.size); if (t->bt_rdata.data == NULL) return (RET_ERROR); p = (u_char *)t->bt_rdata.data + len; } } if (ch == EOF) break; } if (nrec < top) { F_SET(t, R_EOF); return (RET_SPECIAL); } return (RET_SUCCESS); } /* * __REC_FMAP -- Get fixed length records from a file. * * Parameters: * t: tree * cnt: records to read * * Returns: * RET_ERROR, RET_SUCCESS */ int __rec_fmap(t, top) BTREE *t; recno_t top; { DBT data; recno_t nrec; u_char *sp, *ep, *p; size_t len; if (t->bt_rdata.size < t->bt_reclen) { t->bt_rdata.data = t->bt_rdata.data == NULL ? malloc(t->bt_reclen) : realloc(t->bt_rdata.data, t->bt_reclen); if (t->bt_rdata.data == NULL) return (RET_ERROR); t->bt_rdata.size = t->bt_reclen; } data.data = t->bt_rdata.data; data.size = t->bt_reclen; sp = (u_char *)t->bt_cmap; ep = (u_char *)t->bt_emap; for (nrec = t->bt_nrecs; nrec < top; ++nrec) { if (sp >= ep) { F_SET(t, R_EOF); return (RET_SPECIAL); } len = t->bt_reclen; for (p = t->bt_rdata.data; sp < ep && len > 0; *p++ = *sp++, --len); if (len != 0) memset(p, t->bt_bval, len); if (__rec_iput(t, nrec, &data, 0) != RET_SUCCESS) return (RET_ERROR); } t->bt_cmap = (caddr_t)sp; return (RET_SUCCESS); } /* * __REC_VMAP -- Get variable length records from a file. * * Parameters: * t: tree * cnt: records to read * * Returns: * RET_ERROR, RET_SUCCESS */ int __rec_vmap(t, top) BTREE *t; recno_t top; { DBT data; u_char *sp, *ep; recno_t nrec; int bval; sp = (u_char *)t->bt_cmap; ep = (u_char *)t->bt_emap; bval = t->bt_bval; for (nrec = t->bt_nrecs; nrec < top; ++nrec) { if (sp >= ep) { F_SET(t, R_EOF); return (RET_SPECIAL); } for (data.data = sp; sp < ep && *sp != bval; ++sp); data.size = sp - (u_char *)data.data; if (__rec_iput(t, nrec, &data, 0) != RET_SUCCESS) return (RET_ERROR); ++sp; } t->bt_cmap = (caddr_t)sp; return (RET_SUCCESS); } vigor-0.016.orig/db/recno/rec_open.c0100644000076400007640000001523507103707222015725 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)rec_open.c 8.12 (Berkeley) 11/18/94"; #endif /* LIBC_SCCS and not lint */ #include #ifdef RECNO_USE_MMAP #include #endif #include #include #include #include #include #include #include #include #include "recno.h" DB * __rec_open(fname, flags, mode, openinfo, dflags) const char *fname; int flags, mode, dflags; const RECNOINFO *openinfo; { BTREE *t; BTREEINFO btopeninfo; DB *dbp; PAGE *h; struct stat sb; int rfd, sverrno; /* Open the user's file -- if this fails, we're done. */ if (fname != NULL && (rfd = open(fname, flags, mode)) < 0) return (NULL); /* Create a btree in memory (backed by disk). */ dbp = NULL; if (openinfo) { if (openinfo->flags & ~(R_FIXEDLEN | R_NOKEY | R_SNAPSHOT)) goto einval; btopeninfo.flags = 0; btopeninfo.cachesize = openinfo->cachesize; btopeninfo.maxkeypage = 0; btopeninfo.minkeypage = 0; btopeninfo.psize = openinfo->psize; btopeninfo.compare = NULL; btopeninfo.prefix = NULL; btopeninfo.lorder = openinfo->lorder; dbp = __bt_open(openinfo->bfname, O_RDWR, S_IRUSR | S_IWUSR, &btopeninfo, dflags); } else dbp = __bt_open(NULL, O_RDWR, S_IRUSR | S_IWUSR, NULL, dflags); if (dbp == NULL) goto err; /* * Some fields in the tree structure are recno specific. Fill them * in and make the btree structure look like a recno structure. We * don't change the bt_ovflsize value, it's close enough and slightly * bigger. */ t = dbp->internal; if (openinfo) { if (openinfo->flags & R_FIXEDLEN) { F_SET(t, R_FIXLEN); t->bt_reclen = openinfo->reclen; if (t->bt_reclen == 0) goto einval; } t->bt_bval = openinfo->bval; } else t->bt_bval = '\n'; F_SET(t, R_RECNO); if (fname == NULL) F_SET(t, R_EOF | R_INMEM); else t->bt_rfd = rfd; if (fname != NULL) { /* * In 4.4BSD, stat(2) returns true for ISSOCK on pipes. * Unfortunately, that's not portable, so we use lseek * and check the errno values. */ errno = 0; if (lseek(rfd, (off_t)0, SEEK_CUR) == -1 && errno == ESPIPE) { switch (flags & O_ACCMODE) { case O_RDONLY: F_SET(t, R_RDONLY); break; default: goto einval; } slow: if ((t->bt_rfp = fdopen(rfd, "r")) == NULL) goto err; F_SET(t, R_CLOSEFP); t->bt_irec = F_ISSET(t, R_FIXLEN) ? __rec_fpipe : __rec_vpipe; } else { switch (flags & O_ACCMODE) { case O_RDONLY: F_SET(t, R_RDONLY); break; case O_RDWR: break; default: goto einval; } if (fstat(rfd, &sb)) goto err; /* * Kluge -- we'd like to test to see if the file is too * big to mmap. Since, we don't know what size or type * off_t's or size_t's are, what the largest unsigned * integral type is, or what random insanity the local * C compiler will perpetrate, doing the comparison in * a portable way is flatly impossible. Hope that mmap * fails if the file is too large. */ if (sb.st_size == 0) F_SET(t, R_EOF); else { #ifdef RECNO_USE_MMAP /* * XXX * Mmap doesn't work correctly on many current * systems. In particular, it can fail subtly, * with cache coherency problems. Don't use it * for now. */ t->bt_msize = sb.st_size; if ((t->bt_smap = mmap(NULL, t->bt_msize, PROT_READ, MAP_PRIVATE, rfd, (off_t)0)) == (caddr_t)-1) goto slow; t->bt_cmap = t->bt_smap; t->bt_emap = t->bt_smap + sb.st_size; t->bt_irec = F_ISSET(t, R_FIXLEN) ? __rec_fmap : __rec_vmap; F_SET(t, R_MEMMAPPED); #else goto slow; #endif } } } /* Use the recno routines. */ dbp->close = __rec_close; dbp->del = __rec_delete; dbp->fd = __rec_fd; dbp->get = __rec_get; dbp->put = __rec_put; dbp->seq = __rec_seq; dbp->sync = __rec_sync; /* If the root page was created, reset the flags. */ if ((h = mpool_get(t->bt_mp, P_ROOT, 0)) == NULL) goto err; if ((h->flags & P_TYPE) == P_BLEAF) { F_CLR(h, P_TYPE); F_SET(h, P_RLEAF); mpool_put(t->bt_mp, h, MPOOL_DIRTY); } else mpool_put(t->bt_mp, h, 0); if (openinfo && openinfo->flags & R_SNAPSHOT && !F_ISSET(t, R_EOF | R_INMEM) && t->bt_irec(t, MAX_REC_NUMBER) == RET_ERROR) goto err; return (dbp); einval: errno = EINVAL; err: sverrno = errno; if (dbp != NULL) (void)__bt_close(dbp); if (fname != NULL) (void)close(rfd); errno = sverrno; return (NULL); } int __rec_fd(dbp) const DB *dbp; { BTREE *t; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* In-memory database can't have a file descriptor. */ if (F_ISSET(t, R_INMEM)) { errno = ENOENT; return (-1); } return (t->bt_rfd); } vigor-0.016.orig/db/recno/rec_put.c0100644000076400007640000001640707103707222015576 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)rec_put.c 8.7 (Berkeley) 8/18/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include "recno.h" /* * __REC_PUT -- Add a recno item to the tree. * * Parameters: * dbp: pointer to access method * key: key * data: data * flag: R_CURSOR, R_IAFTER, R_IBEFORE, R_NOOVERWRITE * * Returns: * RET_ERROR, RET_SUCCESS and RET_SPECIAL if the key is * already in the tree and R_NOOVERWRITE specified. */ int __rec_put(dbp, key, data, flags) const DB *dbp; DBT *key; const DBT *data; u_int flags; { BTREE *t; DBT fdata, tdata; recno_t nrec; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* * If using fixed-length records, and the record is long, return * EINVAL. If it's short, pad it out. Use the record data return * memory, it's only short-term. */ if (F_ISSET(t, R_FIXLEN) && data->size != t->bt_reclen) { if (data->size > t->bt_reclen) goto einval; if (t->bt_rdata.size < t->bt_reclen) { t->bt_rdata.data = t->bt_rdata.data == NULL ? malloc(t->bt_reclen) : realloc(t->bt_rdata.data, t->bt_reclen); if (t->bt_rdata.data == NULL) return (RET_ERROR); t->bt_rdata.size = t->bt_reclen; } memmove(t->bt_rdata.data, data->data, data->size); memset((char *)t->bt_rdata.data + data->size, t->bt_bval, t->bt_reclen - data->size); fdata.data = t->bt_rdata.data; fdata.size = t->bt_reclen; } else { fdata.data = data->data; fdata.size = data->size; } switch (flags) { case R_CURSOR: if (!F_ISSET(&t->bt_cursor, CURS_INIT)) goto einval; nrec = t->bt_cursor.rcursor; break; case R_SETCURSOR: if ((nrec = *(recno_t *)key->data) == 0) goto einval; break; case R_IAFTER: if ((nrec = *(recno_t *)key->data) == 0) { nrec = 1; flags = R_IBEFORE; } break; case 0: case R_IBEFORE: if ((nrec = *(recno_t *)key->data) == 0) goto einval; break; case R_NOOVERWRITE: if ((nrec = *(recno_t *)key->data) == 0) goto einval; if (nrec <= t->bt_nrecs) return (RET_SPECIAL); break; default: einval: errno = EINVAL; return (RET_ERROR); } /* * Make sure that records up to and including the put record are * already in the database. If skipping records, create empty ones. */ if (nrec > t->bt_nrecs) { if (!F_ISSET(t, R_EOF | R_INMEM) && t->bt_irec(t, nrec) == RET_ERROR) return (RET_ERROR); if (nrec > t->bt_nrecs + 1) { if (F_ISSET(t, R_FIXLEN)) { if ((tdata.data = (void *)malloc(t->bt_reclen)) == NULL) return (RET_ERROR); tdata.size = t->bt_reclen; memset(tdata.data, t->bt_bval, tdata.size); } else { tdata.data = NULL; tdata.size = 0; } while (nrec > t->bt_nrecs + 1) if (__rec_iput(t, t->bt_nrecs, &tdata, 0) != RET_SUCCESS) return (RET_ERROR); if (F_ISSET(t, R_FIXLEN)) free(tdata.data); } } if ((status = __rec_iput(t, nrec - 1, &fdata, flags)) != RET_SUCCESS) return (status); if (flags == R_SETCURSOR) t->bt_cursor.rcursor = nrec; F_SET(t, R_MODIFIED); return (__rec_ret(t, NULL, nrec, key, NULL)); } /* * __REC_IPUT -- Add a recno item to the tree. * * Parameters: * t: tree * nrec: record number * data: data * * Returns: * RET_ERROR, RET_SUCCESS */ int __rec_iput(t, nrec, data, flags) BTREE *t; recno_t nrec; const DBT *data; u_int flags; { DBT tdata; EPG *e; PAGE *h; indx_t index, nxtindex; pgno_t pg; u_int32_t nbytes; int dflags, status; char *dest, db[NOVFLSIZE]; /* * If the data won't fit on a page, store it on indirect pages. * * XXX * If the insert fails later on, these pages aren't recovered. */ if (data->size > t->bt_ovflsize) { if (__ovfl_put(t, data, &pg) == RET_ERROR) return (RET_ERROR); tdata.data = db; tdata.size = NOVFLSIZE; *(pgno_t *)db = pg; *(u_int32_t *)(db + sizeof(pgno_t)) = data->size; dflags = P_BIGDATA; data = &tdata; } else dflags = 0; /* __rec_search pins the returned page. */ if ((e = __rec_search(t, nrec, nrec > t->bt_nrecs || flags == R_IAFTER || flags == R_IBEFORE ? SINSERT : SEARCH)) == NULL) return (RET_ERROR); h = e->page; index = e->index; /* * Add the specified key/data pair to the tree. The R_IAFTER and * R_IBEFORE flags insert the key after/before the specified key. * * Pages are split as required. */ switch (flags) { case R_IAFTER: ++index; break; case R_IBEFORE: break; default: if (nrec < t->bt_nrecs && __rec_dleaf(t, h, index) == RET_ERROR) { mpool_put(t->bt_mp, h, 0); return (RET_ERROR); } break; } /* * If not enough room, split the page. The split code will insert * the key and data and unpin the current page. If inserting into * the offset array, shift the pointers up. */ nbytes = NRLEAFDBT(data->size); if (h->upper - h->lower < nbytes + sizeof(indx_t)) { status = __bt_split(t, h, NULL, data, dflags, nbytes, index); if (status == RET_SUCCESS) ++t->bt_nrecs; return (status); } if (index < (nxtindex = NEXTINDEX(h))) memmove(h->linp + index + 1, h->linp + index, (nxtindex - index) * sizeof(indx_t)); h->lower += sizeof(indx_t); h->linp[index] = h->upper -= nbytes; dest = (char *)h + h->upper; WR_RLEAF(dest, data, dflags); ++t->bt_nrecs; F_SET(t, B_MODIFIED); mpool_put(t->bt_mp, h, MPOOL_DIRTY); return (RET_SUCCESS); } vigor-0.016.orig/db/recno/rec_search.c0100644000076400007640000000751707103707222016235 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)rec_search.c 8.4 (Berkeley) 7/14/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include "recno.h" /* * __REC_SEARCH -- Search a btree for a key. * * Parameters: * t: tree to search * recno: key to find * op: search operation * * Returns: * EPG for matching record, if any, or the EPG for the location of the * key, if it were inserted into the tree. * * Returns: * The EPG for matching record, if any, or the EPG for the location * of the key, if it were inserted into the tree, is entered into * the bt_cur field of the tree. A pointer to the field is returned. */ EPG * __rec_search(t, recno, op) BTREE *t; recno_t recno; enum SRCHOP op; { register indx_t index; register PAGE *h; EPGNO *parent; RINTERNAL *r; pgno_t pg; indx_t top; recno_t total; int sverrno; BT_CLR(t); for (pg = P_ROOT, total = 0;;) { if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) goto err; if (h->flags & P_RLEAF) { t->bt_cur.page = h; t->bt_cur.index = recno - total; return (&t->bt_cur); } for (index = 0, top = NEXTINDEX(h);;) { r = GETRINTERNAL(h, index); if (++index == top || total + r->nrecs > recno) break; total += r->nrecs; } BT_PUSH(t, pg, index - 1); pg = r->pgno; switch (op) { case SDELETE: --GETRINTERNAL(h, (index - 1))->nrecs; mpool_put(t->bt_mp, h, MPOOL_DIRTY); break; case SINSERT: ++GETRINTERNAL(h, (index - 1))->nrecs; mpool_put(t->bt_mp, h, MPOOL_DIRTY); break; case SEARCH: mpool_put(t->bt_mp, h, 0); break; } } /* Try and recover the tree. */ err: sverrno = errno; if (op != SEARCH) while ((parent = BT_POP(t)) != NULL) { if ((h = mpool_get(t->bt_mp, parent->pgno, 0)) == NULL) break; if (op == SINSERT) --GETRINTERNAL(h, parent->index)->nrecs; else ++GETRINTERNAL(h, parent->index)->nrecs; mpool_put(t->bt_mp, h, MPOOL_DIRTY); } errno = sverrno; return (NULL); } vigor-0.016.orig/db/recno/rec_seq.c0100644000076400007640000000743007103707222015552 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)rec_seq.c 8.3 (Berkeley) 7/14/94"; #endif /* not lint */ #include #include #include #include #include #include #include "recno.h" /* * __REC_SEQ -- Recno sequential scan interface. * * Parameters: * dbp: pointer to access method * key: key for positioning and return value * data: data return value * flags: R_CURSOR, R_FIRST, R_LAST, R_NEXT, R_PREV. * * Returns: * RET_ERROR, RET_SUCCESS or RET_SPECIAL if there's no next key. */ int __rec_seq(dbp, key, data, flags) const DB *dbp; DBT *key, *data; u_int flags; { BTREE *t; EPG *e; recno_t nrec; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } switch(flags) { case R_CURSOR: if ((nrec = *(recno_t *)key->data) == 0) goto einval; break; case R_NEXT: if (F_ISSET(&t->bt_cursor, CURS_INIT)) { nrec = t->bt_cursor.rcursor + 1; break; } /* FALLTHROUGH */ case R_FIRST: nrec = 1; break; case R_PREV: if (F_ISSET(&t->bt_cursor, CURS_INIT)) { if ((nrec = t->bt_cursor.rcursor - 1) == 0) return (RET_SPECIAL); break; } /* FALLTHROUGH */ case R_LAST: if (!F_ISSET(t, R_EOF | R_INMEM) && t->bt_irec(t, MAX_REC_NUMBER) == RET_ERROR) return (RET_ERROR); nrec = t->bt_nrecs; break; default: einval: errno = EINVAL; return (RET_ERROR); } if (t->bt_nrecs == 0 || nrec > t->bt_nrecs) { if (!F_ISSET(t, R_EOF | R_INMEM) && (status = t->bt_irec(t, nrec)) != RET_SUCCESS) return (status); if (t->bt_nrecs == 0 || nrec > t->bt_nrecs) return (RET_SPECIAL); } if ((e = __rec_search(t, nrec - 1, SEARCH)) == NULL) return (RET_ERROR); F_SET(&t->bt_cursor, CURS_INIT); t->bt_cursor.rcursor = nrec; status = __rec_ret(t, e, nrec, key, data); if (F_ISSET(t, B_DB_LOCK)) mpool_put(t->bt_mp, e->page, 0); else t->bt_pinned = e->page; return (status); } vigor-0.016.orig/db/recno/rec_utils.c0100644000076400007640000000753207103707222016125 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)rec_utils.c 8.6 (Berkeley) 7/16/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include "recno.h" /* * __rec_ret -- * Build return data. * * Parameters: * t: tree * e: key/data pair to be returned * nrec: record number * key: user's key structure * data: user's data structure * * Returns: * RET_SUCCESS, RET_ERROR. */ int __rec_ret(t, e, nrec, key, data) BTREE *t; EPG *e; recno_t nrec; DBT *key, *data; { RLEAF *rl; void *p; if (key == NULL) goto dataonly; /* We have to copy the key, it's not on the page. */ if (sizeof(recno_t) > t->bt_rkey.size) { p = (void *)(t->bt_rkey.data == NULL ? malloc(sizeof(recno_t)) : realloc(t->bt_rkey.data, sizeof(recno_t))); if (p == NULL) return (RET_ERROR); t->bt_rkey.data = p; t->bt_rkey.size = sizeof(recno_t); } memmove(t->bt_rkey.data, &nrec, sizeof(recno_t)); key->size = sizeof(recno_t); key->data = t->bt_rkey.data; dataonly: if (data == NULL) return (RET_SUCCESS); /* * We must copy big keys/data to make them contigous. Otherwise, * leave the page pinned and don't copy unless the user specified * concurrent access. */ rl = GETRLEAF(e->page, e->index); if (rl->flags & P_BIGDATA) { if (__ovfl_get(t, rl->bytes, &data->size, &t->bt_rdata.data, &t->bt_rdata.size)) return (RET_ERROR); data->data = t->bt_rdata.data; } else if (F_ISSET(t, B_DB_LOCK)) { /* Use +1 in case the first record retrieved is 0 length. */ if (rl->dsize + 1 > t->bt_rdata.size) { p = (void *)(t->bt_rdata.data == NULL ? malloc(rl->dsize + 1) : realloc(t->bt_rdata.data, rl->dsize + 1)); if (p == NULL) return (RET_ERROR); t->bt_rdata.data = p; t->bt_rdata.size = rl->dsize + 1; } memmove(t->bt_rdata.data, rl->bytes, rl->dsize); data->size = rl->dsize; data->data = t->bt_rdata.data; } else { data->size = rl->dsize; data->data = rl->bytes; } return (RET_SUCCESS); } vigor-0.016.orig/db/recno/recno.h0100644000076400007640000000370707103707222015247 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)recno.h 8.1 (Berkeley) 6/4/93 */ enum SRCHOP { SDELETE, SINSERT, SEARCH}; /* Rec_search operation. */ #include "../btree/btree.h" #include "extern.h" vigor-0.016.orig/db/recno/rec_close.c0100644000076400007640000001165207103707222016070 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)rec_close.c 8.9 (Berkeley) 11/18/94"; #endif /* LIBC_SCCS and not lint */ #include #include #ifdef RECNO_USE_MMAP #include #endif #include #include #include #include #include #include "recno.h" /* * __REC_CLOSE -- Close a recno tree. * * Parameters: * dbp: pointer to access method * * Returns: * RET_ERROR, RET_SUCCESS */ int __rec_close(dbp) DB *dbp; { BTREE *t; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } if (__rec_sync(dbp, 0) == RET_ERROR) return (RET_ERROR); /* Committed to closing. */ status = RET_SUCCESS; #ifdef RECNO_USE_MMAP if (F_ISSET(t, R_MEMMAPPED) && munmap(t->bt_smap, t->bt_msize)) status = RET_ERROR; #endif if (!F_ISSET(t, R_INMEM)) if (F_ISSET(t, R_CLOSEFP)) { if (fclose(t->bt_rfp)) status = RET_ERROR; } else if (close(t->bt_rfd)) status = RET_ERROR; if (__bt_close(dbp) == RET_ERROR) status = RET_ERROR; return (status); } /* * __REC_SYNC -- sync the recno tree to disk. * * Parameters: * dbp: pointer to access method * * Returns: * RET_SUCCESS, RET_ERROR. */ int __rec_sync(dbp, flags) const DB *dbp; u_int flags; { struct iovec iov[2]; BTREE *t; DBT data, key; off_t off; recno_t scursor, trec; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } if (flags == R_RECNOSYNC) return (__bt_sync(dbp, 0)); if (F_ISSET(t, R_RDONLY | R_INMEM) || !F_ISSET(t, R_MODIFIED)) return (RET_SUCCESS); /* Read any remaining records into the tree. */ if (!F_ISSET(t, R_EOF) && t->bt_irec(t, MAX_REC_NUMBER) == RET_ERROR) return (RET_ERROR); /* Rewind the file descriptor. */ if (lseek(t->bt_rfd, (off_t)0, SEEK_SET) != 0) return (RET_ERROR); /* Save the cursor. */ scursor = t->bt_cursor.rcursor; key.size = sizeof(recno_t); key.data = &trec; if (F_ISSET(t, R_FIXLEN)) { /* * We assume that fixed length records are all fixed length. * Any that aren't are either EINVAL'd or corrected by the * record put code. */ status = (dbp->seq)(dbp, &key, &data, R_FIRST); while (status == RET_SUCCESS) { if (write(t->bt_rfd, data.data, data.size) != data.size) return (RET_ERROR); status = (dbp->seq)(dbp, &key, &data, R_NEXT); } } else { iov[1].iov_base = &t->bt_bval; iov[1].iov_len = 1; status = (dbp->seq)(dbp, &key, &data, R_FIRST); while (status == RET_SUCCESS) { iov[0].iov_base = data.data; iov[0].iov_len = data.size; if (writev(t->bt_rfd, iov, 2) != data.size + 1) return (RET_ERROR); status = (dbp->seq)(dbp, &key, &data, R_NEXT); } } /* Restore the cursor. */ t->bt_cursor.rcursor = scursor; if (status == RET_ERROR) return (RET_ERROR); if ((off = lseek(t->bt_rfd, (off_t)0, SEEK_CUR)) == -1) return (RET_ERROR); if (ftruncate(t->bt_rfd, off)) return (RET_ERROR); F_CLR(t, R_MODIFIED); return (RET_SUCCESS); } vigor-0.016.orig/db/mpool/0040755000076400007640000000000007103707222014004 5ustar cjw44cjw44vigor-0.016.orig/db/mpool/mpool.c0100644000076400007640000002463607103707222015306 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)mpool.c 8.5 (Berkeley) 7/26/94"; #endif /* LIBC_SCCS and not lint */ #include #include /* XXX: param.h may not have included types.h */ #include #include #include #include #include #include #include #include #define __MPOOLINTERFACE_PRIVATE #include static BKT *mpool_bkt __P((MPOOL *)); static BKT *mpool_look __P((MPOOL *, pgno_t)); static int mpool_write __P((MPOOL *, BKT *)); /* * mpool_open -- * Initialize a memory pool. */ MPOOL * mpool_open(key, fd, pagesize, maxcache) void *key; int fd; pgno_t pagesize, maxcache; { struct stat sb; MPOOL *mp; int entry; /* * Get information about the file. * * XXX * We don't currently handle pipes, although we should. */ if (fstat(fd, &sb)) return (NULL); if (!S_ISREG(sb.st_mode)) { errno = ESPIPE; return (NULL); } /* Allocate and initialize the MPOOL cookie. */ if ((mp = (MPOOL *)calloc(1, sizeof(MPOOL))) == NULL) return (NULL); CIRCLEQ_INIT(&mp->lqh); for (entry = 0; entry < HASHSIZE; ++entry) CIRCLEQ_INIT(&mp->hqh[entry]); mp->maxcache = maxcache; mp->npages = sb.st_size / pagesize; mp->pagesize = pagesize; mp->fd = fd; return (mp); } /* * mpool_filter -- * Initialize input/output filters. */ void mpool_filter(mp, pgin, pgout, pgcookie) MPOOL *mp; void (*pgin) __P((void *, pgno_t, void *)); void (*pgout) __P((void *, pgno_t, void *)); void *pgcookie; { mp->pgin = pgin; mp->pgout = pgout; mp->pgcookie = pgcookie; } /* * mpool_new -- * Get a new page of memory. */ void * mpool_new(mp, pgnoaddr) MPOOL *mp; pgno_t *pgnoaddr; { struct _hqh *head; BKT *bp; if (mp->npages == MAX_PAGE_NUMBER) { (void)fprintf(stderr, "mpool_new: page allocation overflow.\n"); abort(); } #ifdef STATISTICS ++mp->pagenew; #endif /* * Get a BKT from the cache. Assign a new page number, attach * it to the head of the hash chain, the tail of the lru chain, * and return. */ if ((bp = mpool_bkt(mp)) == NULL) return (NULL); *pgnoaddr = bp->pgno = mp->npages++; bp->flags = MPOOL_PINNED; head = &mp->hqh[HASHKEY(bp->pgno)]; CIRCLEQ_INSERT_HEAD(head, bp, hq); CIRCLEQ_INSERT_TAIL(&mp->lqh, bp, q); return (bp->page); } /* * mpool_get * Get a page. */ void * mpool_get(mp, pgno, flags) MPOOL *mp; pgno_t pgno; u_int flags; /* XXX not used? */ { struct _hqh *head; BKT *bp; off_t off; int nr; /* Check for attempt to retrieve a non-existent page. */ if (pgno >= mp->npages) { errno = EINVAL; return (NULL); } #ifdef STATISTICS ++mp->pageget; #endif /* Check for a page that is cached. */ if ((bp = mpool_look(mp, pgno)) != NULL) { #ifdef DEBUG if (bp->flags & MPOOL_PINNED) { (void)fprintf(stderr, "mpool_get: page %d already pinned\n", bp->pgno); abort(); } #endif /* * Move the page to the head of the hash chain and the tail * of the lru chain. */ head = &mp->hqh[HASHKEY(bp->pgno)]; CIRCLEQ_REMOVE(head, bp, hq); CIRCLEQ_INSERT_HEAD(head, bp, hq); CIRCLEQ_REMOVE(&mp->lqh, bp, q); CIRCLEQ_INSERT_TAIL(&mp->lqh, bp, q); /* Return a pinned page. */ bp->flags |= MPOOL_PINNED; return (bp->page); } /* Get a page from the cache. */ if ((bp = mpool_bkt(mp)) == NULL) return (NULL); /* Read in the contents. */ #ifdef STATISTICS ++mp->pageread; #endif off = mp->pagesize * pgno; if (lseek(mp->fd, off, SEEK_SET) != off) return (NULL); if ((nr = read(mp->fd, bp->page, mp->pagesize)) != mp->pagesize) { if (nr >= 0) errno = EFTYPE; return (NULL); } /* Set the page number, pin the page. */ bp->pgno = pgno; bp->flags = MPOOL_PINNED; /* * Add the page to the head of the hash chain and the tail * of the lru chain. */ head = &mp->hqh[HASHKEY(bp->pgno)]; CIRCLEQ_INSERT_HEAD(head, bp, hq); CIRCLEQ_INSERT_TAIL(&mp->lqh, bp, q); /* Run through the user's filter. */ if (mp->pgin != NULL) (mp->pgin)(mp->pgcookie, bp->pgno, bp->page); return (bp->page); } /* * mpool_put * Return a page. */ int mpool_put(mp, page, flags) MPOOL *mp; void *page; u_int flags; { BKT *bp; #ifdef STATISTICS ++mp->pageput; #endif bp = (BKT *)((char *)page - sizeof(BKT)); #ifdef DEBUG if (!(bp->flags & MPOOL_PINNED)) { (void)fprintf(stderr, "mpool_put: page %d not pinned\n", bp->pgno); abort(); } #endif bp->flags &= ~MPOOL_PINNED; bp->flags |= flags & MPOOL_DIRTY; return (RET_SUCCESS); } /* * mpool_close * Close the buffer pool. */ int mpool_close(mp) MPOOL *mp; { BKT *bp; /* Free up any space allocated to the lru pages. */ while ((bp = mp->lqh.cqh_first) != (void *)&mp->lqh) { CIRCLEQ_REMOVE(&mp->lqh, mp->lqh.cqh_first, q); free(bp); } /* Free the MPOOL cookie. */ free(mp); return (RET_SUCCESS); } /* * mpool_sync * Sync the pool to disk. */ int mpool_sync(mp) MPOOL *mp; { BKT *bp; /* Walk the lru chain, flushing any dirty pages to disk. */ for (bp = mp->lqh.cqh_first; bp != (void *)&mp->lqh; bp = bp->q.cqe_next) if (bp->flags & MPOOL_DIRTY && mpool_write(mp, bp) == RET_ERROR) return (RET_ERROR); /* Sync the file descriptor. */ return (fsync(mp->fd) ? RET_ERROR : RET_SUCCESS); } /* * mpool_bkt * Get a page from the cache (or create one). */ static BKT * mpool_bkt(mp) MPOOL *mp; { struct _hqh *head; BKT *bp; /* If under the max cached, always create a new page. */ if (mp->curcache < mp->maxcache) goto new; /* * If the cache is max'd out, walk the lru list for a buffer we * can flush. If we find one, write it (if necessary) and take it * off any lists. If we don't find anything we grow the cache anyway. * The cache never shrinks. */ for (bp = mp->lqh.cqh_first; bp != (void *)&mp->lqh; bp = bp->q.cqe_next) if (!(bp->flags & MPOOL_PINNED)) { /* Flush if dirty. */ if (bp->flags & MPOOL_DIRTY && mpool_write(mp, bp) == RET_ERROR) return (NULL); #ifdef STATISTICS ++mp->pageflush; #endif /* Remove from the hash and lru queues. */ head = &mp->hqh[HASHKEY(bp->pgno)]; CIRCLEQ_REMOVE(head, bp, hq); CIRCLEQ_REMOVE(&mp->lqh, bp, q); #ifdef DEBUG { void *spage; spage = bp->page; memset(bp, 0xff, sizeof(BKT) + mp->pagesize); bp->page = spage; } #endif return (bp); } new: if ((bp = (BKT *)malloc(sizeof(BKT) + mp->pagesize)) == NULL) return (NULL); #ifdef STATISTICS ++mp->pagealloc; #endif #if defined(DEBUG) || defined(PURIFY) memset(bp, 0xff, sizeof(BKT) + mp->pagesize); #endif bp->page = (char *)bp + sizeof(BKT); ++mp->curcache; return (bp); } /* * mpool_write * Write a page to disk. */ static int mpool_write(mp, bp) MPOOL *mp; BKT *bp; { off_t off; #ifdef STATISTICS ++mp->pagewrite; #endif /* Run through the user's filter. */ if (mp->pgout) (mp->pgout)(mp->pgcookie, bp->pgno, bp->page); off = mp->pagesize * bp->pgno; if (lseek(mp->fd, off, SEEK_SET) != off) return (RET_ERROR); if (write(mp->fd, bp->page, mp->pagesize) != mp->pagesize) return (RET_ERROR); bp->flags &= ~MPOOL_DIRTY; return (RET_SUCCESS); } /* * mpool_look * Lookup a page in the cache. */ static BKT * mpool_look(mp, pgno) MPOOL *mp; pgno_t pgno; { struct _hqh *head; BKT *bp; head = &mp->hqh[HASHKEY(pgno)]; for (bp = head->cqh_first; bp != (void *)head; bp = bp->hq.cqe_next) if (bp->pgno == pgno) { #ifdef STATISTICS ++mp->cachehit; #endif return (bp); } #ifdef STATISTICS ++mp->cachemiss; #endif return (NULL); } #ifdef STATISTICS /* * mpool_stat * Print out cache statistics. */ void mpool_stat(mp) MPOOL *mp; { BKT *bp; int cnt; char *sep; (void)fprintf(stderr, "%lu pages in the file\n", mp->npages); (void)fprintf(stderr, "page size %lu, cacheing %lu pages of %lu page max cache\n", mp->pagesize, mp->curcache, mp->maxcache); (void)fprintf(stderr, "%lu page puts, %lu page gets, %lu page new\n", mp->pageput, mp->pageget, mp->pagenew); (void)fprintf(stderr, "%lu page allocs, %lu page flushes\n", mp->pagealloc, mp->pageflush); if (mp->cachehit + mp->cachemiss) (void)fprintf(stderr, "%.0f%% cache hit rate (%lu hits, %lu misses)\n", ((double)mp->cachehit / (mp->cachehit + mp->cachemiss)) * 100, mp->cachehit, mp->cachemiss); (void)fprintf(stderr, "%lu page reads, %lu page writes\n", mp->pageread, mp->pagewrite); sep = ""; cnt = 0; for (bp = mp->lqh.cqh_first; bp != (void *)&mp->lqh; bp = bp->q.cqe_next) { (void)fprintf(stderr, "%s%d", sep, bp->pgno); if (bp->flags & MPOOL_DIRTY) (void)fprintf(stderr, "d"); if (bp->flags & MPOOL_PINNED) (void)fprintf(stderr, "P"); if (++cnt == 10) { sep = "\n"; cnt = 0; } else sep = ", "; } (void)fprintf(stderr, "\n"); } #endif vigor-0.016.orig/db/btree/0040755000076400007640000000000007103707223013760 5ustar cjw44cjw44vigor-0.016.orig/db/btree/extern.h0100644000076400007640000000634607103707223015444 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)extern.h 8.10 (Berkeley) 7/20/94 */ int __bt_close __P((DB *)); int __bt_cmp __P((BTREE *, const DBT *, EPG *)); int __bt_crsrdel __P((BTREE *, EPGNO *)); int __bt_defcmp __P((const DBT *, const DBT *)); size_t __bt_defpfx __P((const DBT *, const DBT *)); int __bt_delete __P((const DB *, const DBT *, u_int)); int __bt_dleaf __P((BTREE *, const DBT *, PAGE *, u_int)); int __bt_fd __P((const DB *)); int __bt_free __P((BTREE *, PAGE *)); int __bt_get __P((const DB *, const DBT *, DBT *, u_int)); PAGE *__bt_new __P((BTREE *, pgno_t *)); void __bt_pgin __P((void *, pgno_t, void *)); void __bt_pgout __P((void *, pgno_t, void *)); int __bt_push __P((BTREE *, pgno_t, int)); int __bt_put __P((const DB *dbp, DBT *, const DBT *, u_int)); int __bt_ret __P((BTREE *, EPG *, DBT *, DBT *, DBT *, DBT *, int)); EPG *__bt_search __P((BTREE *, const DBT *, int *)); int __bt_seq __P((const DB *, DBT *, DBT *, u_int)); void __bt_setcur __P((BTREE *, pgno_t, u_int)); int __bt_split __P((BTREE *, PAGE *, const DBT *, const DBT *, int, size_t, u_int32_t)); int __bt_sync __P((const DB *, u_int)); int __ovfl_delete __P((BTREE *, void *)); int __ovfl_get __P((BTREE *, void *, size_t *, void **, size_t *)); int __ovfl_put __P((BTREE *, const DBT *, pgno_t *)); #ifdef DEBUG void __bt_dnpage __P((DB *, pgno_t)); void __bt_dpage __P((PAGE *)); void __bt_dump __P((DB *)); #endif #ifdef STATISTICS void __bt_stat __P((DB *)); #endif vigor-0.016.orig/db/btree/bt_conv.c0100644000076400007640000001243007103707223015553 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_conv.c 8.5 (Berkeley) 8/17/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include "btree.h" static void mswap __P((PAGE *)); /* * __BT_BPGIN, __BT_BPGOUT -- * Convert host-specific number layout to/from the host-independent * format stored on disk. * * Parameters: * t: tree * pg: page number * h: page to convert */ void __bt_pgin(t, pg, pp) void *t; pgno_t pg; void *pp; { PAGE *h; indx_t i, top; u_char flags; char *p; if (!F_ISSET(((BTREE *)t), B_NEEDSWAP)) return; if (pg == P_META) { mswap(pp); return; } h = pp; M_32_SWAP(h->pgno); M_32_SWAP(h->prevpg); M_32_SWAP(h->nextpg); M_32_SWAP(h->flags); M_16_SWAP(h->lower); M_16_SWAP(h->upper); top = NEXTINDEX(h); if ((h->flags & P_TYPE) == P_BINTERNAL) for (i = 0; i < top; i++) { M_16_SWAP(h->linp[i]); p = (char *)GETBINTERNAL(h, i); P_32_SWAP(p); p += sizeof(u_int32_t); P_32_SWAP(p); p += sizeof(pgno_t); if (*(u_char *)p & P_BIGKEY) { p += sizeof(u_char); P_32_SWAP(p); p += sizeof(pgno_t); P_32_SWAP(p); } } else if ((h->flags & P_TYPE) == P_BLEAF) for (i = 0; i < top; i++) { M_16_SWAP(h->linp[i]); p = (char *)GETBLEAF(h, i); P_32_SWAP(p); p += sizeof(u_int32_t); P_32_SWAP(p); p += sizeof(u_int32_t); flags = *(u_char *)p; if (flags & (P_BIGKEY | P_BIGDATA)) { p += sizeof(u_char); if (flags & P_BIGKEY) { P_32_SWAP(p); p += sizeof(pgno_t); P_32_SWAP(p); } if (flags & P_BIGDATA) { p += sizeof(u_int32_t); P_32_SWAP(p); p += sizeof(pgno_t); P_32_SWAP(p); } } } } void __bt_pgout(t, pg, pp) void *t; pgno_t pg; void *pp; { PAGE *h; indx_t i, top; u_char flags; char *p; if (!F_ISSET(((BTREE *)t), B_NEEDSWAP)) return; if (pg == P_META) { mswap(pp); return; } h = pp; top = NEXTINDEX(h); if ((h->flags & P_TYPE) == P_BINTERNAL) for (i = 0; i < top; i++) { p = (char *)GETBINTERNAL(h, i); P_32_SWAP(p); p += sizeof(u_int32_t); P_32_SWAP(p); p += sizeof(pgno_t); if (*(u_char *)p & P_BIGKEY) { p += sizeof(u_char); P_32_SWAP(p); p += sizeof(pgno_t); P_32_SWAP(p); } M_16_SWAP(h->linp[i]); } else if ((h->flags & P_TYPE) == P_BLEAF) for (i = 0; i < top; i++) { p = (char *)GETBLEAF(h, i); P_32_SWAP(p); p += sizeof(u_int32_t); P_32_SWAP(p); p += sizeof(u_int32_t); flags = *(u_char *)p; if (flags & (P_BIGKEY | P_BIGDATA)) { p += sizeof(u_char); if (flags & P_BIGKEY) { P_32_SWAP(p); p += sizeof(pgno_t); P_32_SWAP(p); } if (flags & P_BIGDATA) { p += sizeof(u_int32_t); P_32_SWAP(p); p += sizeof(pgno_t); P_32_SWAP(p); } } M_16_SWAP(h->linp[i]); } M_32_SWAP(h->pgno); M_32_SWAP(h->prevpg); M_32_SWAP(h->nextpg); M_32_SWAP(h->flags); M_16_SWAP(h->lower); M_16_SWAP(h->upper); } /* * MSWAP -- Actually swap the bytes on the meta page. * * Parameters: * p: page to convert */ static void mswap(pg) PAGE *pg; { char *p; p = (char *)pg; P_32_SWAP(p); /* magic */ p += sizeof(u_int32_t); P_32_SWAP(p); /* version */ p += sizeof(u_int32_t); P_32_SWAP(p); /* psize */ p += sizeof(u_int32_t); P_32_SWAP(p); /* free */ p += sizeof(u_int32_t); P_32_SWAP(p); /* nrecs */ p += sizeof(u_int32_t); P_32_SWAP(p); /* flags */ p += sizeof(u_int32_t); } vigor-0.016.orig/db/btree/bt_debug.c0100644000076400007640000002074707103707223015706 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_debug.c 8.5 (Berkeley) 8/17/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include "btree.h" #ifdef DEBUG /* * BT_DUMP -- Dump the tree * * Parameters: * dbp: pointer to the DB */ void __bt_dump(dbp) DB *dbp; { BTREE *t; PAGE *h; pgno_t i; char *sep; t = dbp->internal; (void)fprintf(stderr, "%s: pgsz %d", F_ISSET(t, B_INMEM) ? "memory" : "disk", t->bt_psize); if (F_ISSET(t, R_RECNO)) (void)fprintf(stderr, " keys %lu", t->bt_nrecs); #undef X #define X(flag, name) \ if (F_ISSET(t, flag)) { \ (void)fprintf(stderr, "%s%s", sep, name); \ sep = ", "; \ } if (t->flags != 0) { sep = " flags ("; X(R_FIXLEN, "FIXLEN"); X(B_INMEM, "INMEM"); X(B_NODUPS, "NODUPS"); X(B_RDONLY, "RDONLY"); X(R_RECNO, "RECNO"); X(B_METADIRTY,"METADIRTY"); (void)fprintf(stderr, ")\n"); } #undef X for (i = P_ROOT; (h = mpool_get(t->bt_mp, i, 0)) != NULL; ++i) { __bt_dpage(h); (void)mpool_put(t->bt_mp, h, 0); } } /* * BT_DMPAGE -- Dump the meta page * * Parameters: * h: pointer to the PAGE */ void __bt_dmpage(h) PAGE *h; { BTMETA *m; char *sep; m = (BTMETA *)h; (void)fprintf(stderr, "magic %lx\n", m->magic); (void)fprintf(stderr, "version %lu\n", m->version); (void)fprintf(stderr, "psize %lu\n", m->psize); (void)fprintf(stderr, "free %lu\n", m->free); (void)fprintf(stderr, "nrecs %lu\n", m->nrecs); (void)fprintf(stderr, "flags %lu", m->flags); #undef X #define X(flag, name) \ if (m->flags & flag) { \ (void)fprintf(stderr, "%s%s", sep, name); \ sep = ", "; \ } if (m->flags) { sep = " ("; X(B_NODUPS, "NODUPS"); X(R_RECNO, "RECNO"); (void)fprintf(stderr, ")"); } } /* * BT_DNPAGE -- Dump the page * * Parameters: * n: page number to dump. */ void __bt_dnpage(dbp, pgno) DB *dbp; pgno_t pgno; { BTREE *t; PAGE *h; t = dbp->internal; if ((h = mpool_get(t->bt_mp, pgno, 0)) != NULL) { __bt_dpage(h); (void)mpool_put(t->bt_mp, h, 0); } } /* * BT_DPAGE -- Dump the page * * Parameters: * h: pointer to the PAGE */ void __bt_dpage(h) PAGE *h; { BINTERNAL *bi; BLEAF *bl; RINTERNAL *ri; RLEAF *rl; indx_t cur, top; char *sep; (void)fprintf(stderr, " page %d: (", h->pgno); #undef X #define X(flag, name) \ if (h->flags & flag) { \ (void)fprintf(stderr, "%s%s", sep, name); \ sep = ", "; \ } sep = ""; X(P_BINTERNAL, "BINTERNAL") /* types */ X(P_BLEAF, "BLEAF") X(P_RINTERNAL, "RINTERNAL") /* types */ X(P_RLEAF, "RLEAF") X(P_OVERFLOW, "OVERFLOW") X(P_PRESERVE, "PRESERVE"); (void)fprintf(stderr, ")\n"); #undef X (void)fprintf(stderr, "\tprev %2d next %2d", h->prevpg, h->nextpg); if (h->flags & P_OVERFLOW) return; top = NEXTINDEX(h); (void)fprintf(stderr, " lower %3d upper %3d nextind %d\n", h->lower, h->upper, top); for (cur = 0; cur < top; cur++) { (void)fprintf(stderr, "\t[%03d] %4d ", cur, h->linp[cur]); switch (h->flags & P_TYPE) { case P_BINTERNAL: bi = GETBINTERNAL(h, cur); (void)fprintf(stderr, "size %03d pgno %03d", bi->ksize, bi->pgno); if (bi->flags & P_BIGKEY) (void)fprintf(stderr, " (indirect)"); else if (bi->ksize) (void)fprintf(stderr, " {%.*s}", (int)bi->ksize, bi->bytes); break; case P_RINTERNAL: ri = GETRINTERNAL(h, cur); (void)fprintf(stderr, "entries %03d pgno %03d", ri->nrecs, ri->pgno); break; case P_BLEAF: bl = GETBLEAF(h, cur); if (bl->flags & P_BIGKEY) (void)fprintf(stderr, "big key page %lu size %u/", *(pgno_t *)bl->bytes, *(u_int32_t *)(bl->bytes + sizeof(pgno_t))); else if (bl->ksize) (void)fprintf(stderr, "%s/", bl->bytes); if (bl->flags & P_BIGDATA) (void)fprintf(stderr, "big data page %lu size %u", *(pgno_t *)(bl->bytes + bl->ksize), *(u_int32_t *)(bl->bytes + bl->ksize + sizeof(pgno_t))); else if (bl->dsize) (void)fprintf(stderr, "%.*s", (int)bl->dsize, bl->bytes + bl->ksize); break; case P_RLEAF: rl = GETRLEAF(h, cur); if (rl->flags & P_BIGDATA) (void)fprintf(stderr, "big data page %lu size %u", *(pgno_t *)rl->bytes, *(u_int32_t *)(rl->bytes + sizeof(pgno_t))); else if (rl->dsize) (void)fprintf(stderr, "%.*s", (int)rl->dsize, rl->bytes); break; } (void)fprintf(stderr, "\n"); } } #endif #ifdef STATISTICS /* * BT_STAT -- Gather/print the tree statistics * * Parameters: * dbp: pointer to the DB */ void __bt_stat(dbp) DB *dbp; { extern u_long bt_cache_hit, bt_cache_miss, bt_pfxsaved, bt_rootsplit; extern u_long bt_sortsplit, bt_split; BTREE *t; PAGE *h; pgno_t i, pcont, pinternal, pleaf; u_long ifree, lfree, nkeys; int levels; t = dbp->internal; pcont = pinternal = pleaf = 0; nkeys = ifree = lfree = 0; for (i = P_ROOT; (h = mpool_get(t->bt_mp, i, 0)) != NULL; ++i) { switch (h->flags & P_TYPE) { case P_BINTERNAL: case P_RINTERNAL: ++pinternal; ifree += h->upper - h->lower; break; case P_BLEAF: case P_RLEAF: ++pleaf; lfree += h->upper - h->lower; nkeys += NEXTINDEX(h); break; case P_OVERFLOW: ++pcont; break; } (void)mpool_put(t->bt_mp, h, 0); } /* Count the levels of the tree. */ for (i = P_ROOT, levels = 0 ;; ++levels) { h = mpool_get(t->bt_mp, i, 0); if (h->flags & (P_BLEAF|P_RLEAF)) { if (levels == 0) levels = 1; (void)mpool_put(t->bt_mp, h, 0); break; } i = F_ISSET(t, R_RECNO) ? GETRINTERNAL(h, 0)->pgno : GETBINTERNAL(h, 0)->pgno; (void)mpool_put(t->bt_mp, h, 0); } (void)fprintf(stderr, "%d level%s with %ld keys", levels, levels == 1 ? "" : "s", nkeys); if (F_ISSET(t, R_RECNO)) (void)fprintf(stderr, " (%ld header count)", t->bt_nrecs); (void)fprintf(stderr, "\n%lu pages (leaf %ld, internal %ld, overflow %ld)\n", pinternal + pleaf + pcont, pleaf, pinternal, pcont); (void)fprintf(stderr, "%ld cache hits, %ld cache misses\n", bt_cache_hit, bt_cache_miss); (void)fprintf(stderr, "%ld splits (%ld root splits, %ld sort splits)\n", bt_split, bt_rootsplit, bt_sortsplit); pleaf *= t->bt_psize - BTDATAOFF; if (pleaf) (void)fprintf(stderr, "%.0f%% leaf fill (%ld bytes used, %ld bytes free)\n", ((double)(pleaf - lfree) / pleaf) * 100, pleaf - lfree, lfree); pinternal *= t->bt_psize - BTDATAOFF; if (pinternal) (void)fprintf(stderr, "%.0f%% internal fill (%ld bytes used, %ld bytes free\n", ((double)(pinternal - ifree) / pinternal) * 100, pinternal - ifree, ifree); if (bt_pfxsaved) (void)fprintf(stderr, "prefix checking removed %lu bytes.\n", bt_pfxsaved); } #endif vigor-0.016.orig/db/btree/bt_delete.c0100644000076400007640000004021107103707223016046 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_delete.c 8.13 (Berkeley) 7/28/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include "btree.h" static int __bt_bdelete __P((BTREE *, const DBT *)); static int __bt_curdel __P((BTREE *, const DBT *, PAGE *, u_int)); static int __bt_pdelete __P((BTREE *, PAGE *)); static int __bt_relink __P((BTREE *, PAGE *)); static int __bt_stkacq __P((BTREE *, PAGE **, CURSOR *)); /* * __bt_delete * Delete the item(s) referenced by a key. * * Return RET_SPECIAL if the key is not found. */ int __bt_delete(dbp, key, flags) const DB *dbp; const DBT *key; u_int flags; { BTREE *t; CURSOR *c; PAGE *h; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* Check for change to a read-only tree. */ if (F_ISSET(t, B_RDONLY)) { errno = EPERM; return (RET_ERROR); } switch (flags) { case 0: status = __bt_bdelete(t, key); break; case R_CURSOR: /* * If flags is R_CURSOR, delete the cursor. Must already * have started a scan and not have already deleted it. */ c = &t->bt_cursor; if (F_ISSET(c, CURS_INIT)) { if (F_ISSET(c, CURS_ACQUIRE | CURS_AFTER | CURS_BEFORE)) return (RET_SPECIAL); if ((h = mpool_get(t->bt_mp, c->pg.pgno, 0)) == NULL) return (RET_ERROR); /* * If the page is about to be emptied, we'll need to * delete it, which means we have to acquire a stack. */ if (NEXTINDEX(h) == 1) if (__bt_stkacq(t, &h, &t->bt_cursor)) return (RET_ERROR); status = __bt_dleaf(t, NULL, h, c->pg.index); if (NEXTINDEX(h) == 0 && status == RET_SUCCESS) { if (__bt_pdelete(t, h)) return (RET_ERROR); } else mpool_put(t->bt_mp, h, status == RET_SUCCESS ? MPOOL_DIRTY : 0); break; } /* FALLTHROUGH */ default: errno = EINVAL; return (RET_ERROR); } if (status == RET_SUCCESS) F_SET(t, B_MODIFIED); return (status); } /* * __bt_stkacq -- * Acquire a stack so we can delete a cursor entry. * * Parameters: * t: tree * hp: pointer to current, pinned PAGE pointer * c: pointer to the cursor * * Returns: * 0 on success, 1 on failure */ static int __bt_stkacq(t, hp, c) BTREE *t; PAGE **hp; CURSOR *c; { BINTERNAL *bi; EPG *e; EPGNO *parent; PAGE *h; indx_t index; pgno_t pgno; recno_t nextpg, prevpg; int exact, level; /* * Find the first occurrence of the key in the tree. Toss the * currently locked page so we don't hit an already-locked page. */ h = *hp; mpool_put(t->bt_mp, h, 0); if ((e = __bt_search(t, &c->key, &exact)) == NULL) return (1); h = e->page; /* See if we got it in one shot. */ if (h->pgno == c->pg.pgno) goto ret; /* * Move right, looking for the page. At each move we have to move * up the stack until we don't have to move to the next page. If * we have to change pages at an internal level, we have to fix the * stack back up. */ while (h->pgno != c->pg.pgno) { if ((nextpg = h->nextpg) == P_INVALID) break; mpool_put(t->bt_mp, h, 0); /* Move up the stack. */ for (level = 0; (parent = BT_POP(t)) != NULL; ++level) { /* Get the parent page. */ if ((h = mpool_get(t->bt_mp, parent->pgno, 0)) == NULL) return (1); /* Move to the next index. */ if (parent->index != NEXTINDEX(h) - 1) { index = parent->index + 1; BT_PUSH(t, h->pgno, index); break; } mpool_put(t->bt_mp, h, 0); } /* Restore the stack. */ while (level--) { /* Push the next level down onto the stack. */ bi = GETBINTERNAL(h, index); pgno = bi->pgno; BT_PUSH(t, pgno, 0); /* Lose the currently pinned page. */ mpool_put(t->bt_mp, h, 0); /* Get the next level down. */ if ((h = mpool_get(t->bt_mp, pgno, 0)) == NULL) return (1); index = 0; } mpool_put(t->bt_mp, h, 0); if ((h = mpool_get(t->bt_mp, nextpg, 0)) == NULL) return (1); } if (h->pgno == c->pg.pgno) goto ret; /* Reacquire the original stack. */ mpool_put(t->bt_mp, h, 0); if ((e = __bt_search(t, &c->key, &exact)) == NULL) return (1); h = e->page; /* * Move left, looking for the page. At each move we have to move * up the stack until we don't have to change pages to move to the * next page. If we have to change pages at an internal level, we * have to fix the stack back up. */ while (h->pgno != c->pg.pgno) { if ((prevpg = h->prevpg) == P_INVALID) break; mpool_put(t->bt_mp, h, 0); /* Move up the stack. */ for (level = 0; (parent = BT_POP(t)) != NULL; ++level) { /* Get the parent page. */ if ((h = mpool_get(t->bt_mp, parent->pgno, 0)) == NULL) return (1); /* Move to the next index. */ if (parent->index != 0) { index = parent->index - 1; BT_PUSH(t, h->pgno, index); break; } mpool_put(t->bt_mp, h, 0); } /* Restore the stack. */ while (level--) { /* Push the next level down onto the stack. */ bi = GETBINTERNAL(h, index); pgno = bi->pgno; /* Lose the currently pinned page. */ mpool_put(t->bt_mp, h, 0); /* Get the next level down. */ if ((h = mpool_get(t->bt_mp, pgno, 0)) == NULL) return (1); index = NEXTINDEX(h) - 1; BT_PUSH(t, pgno, index); } mpool_put(t->bt_mp, h, 0); if ((h = mpool_get(t->bt_mp, prevpg, 0)) == NULL) return (1); } ret: mpool_put(t->bt_mp, h, 0); return ((*hp = mpool_get(t->bt_mp, c->pg.pgno, 0)) == NULL); } /* * __bt_bdelete -- * Delete all key/data pairs matching the specified key. * * Parameters: * t: tree * key: key to delete * * Returns: * RET_ERROR, RET_SUCCESS and RET_SPECIAL if the key not found. */ static int __bt_bdelete(t, key) BTREE *t; const DBT *key; { EPG *e; PAGE *h; int deleted, exact, redo; deleted = 0; /* Find any matching record; __bt_search pins the page. */ loop: if ((e = __bt_search(t, key, &exact)) == NULL) return (deleted ? RET_SUCCESS : RET_ERROR); if (!exact) { mpool_put(t->bt_mp, e->page, 0); return (deleted ? RET_SUCCESS : RET_SPECIAL); } /* * Delete forward, then delete backward, from the found key. If * there are duplicates and we reach either side of the page, do * the key search again, so that we get them all. */ redo = 0; h = e->page; do { if (__bt_dleaf(t, key, h, e->index)) { mpool_put(t->bt_mp, h, 0); return (RET_ERROR); } if (F_ISSET(t, B_NODUPS)) { if (NEXTINDEX(h) == 0) { if (__bt_pdelete(t, h)) return (RET_ERROR); } else mpool_put(t->bt_mp, h, MPOOL_DIRTY); return (RET_SUCCESS); } deleted = 1; } while (e->index < NEXTINDEX(h) && __bt_cmp(t, key, e) == 0); /* Check for right-hand edge of the page. */ if (e->index == NEXTINDEX(h)) redo = 1; /* Delete from the key to the beginning of the page. */ while (e->index-- > 0) { if (__bt_cmp(t, key, e) != 0) break; if (__bt_dleaf(t, key, h, e->index) == RET_ERROR) { mpool_put(t->bt_mp, h, 0); return (RET_ERROR); } if (e->index == 0) redo = 1; } /* Check for an empty page. */ if (NEXTINDEX(h) == 0) { if (__bt_pdelete(t, h)) return (RET_ERROR); goto loop; } /* Put the page. */ mpool_put(t->bt_mp, h, MPOOL_DIRTY); if (redo) goto loop; return (RET_SUCCESS); } /* * __bt_pdelete -- * Delete a single page from the tree. * * Parameters: * t: tree * h: leaf page * * Returns: * RET_SUCCESS, RET_ERROR. * * Side-effects: * mpool_put's the page */ static int __bt_pdelete(t, h) BTREE *t; PAGE *h; { BINTERNAL *bi; PAGE *pg; EPGNO *parent; indx_t cnt, index, *ip, offset; u_int32_t nksize; char *from; /* * Walk the parent page stack -- a LIFO stack of the pages that were * traversed when we searched for the page where the delete occurred. * Each stack entry is a page number and a page index offset. The * offset is for the page traversed on the search. We've just deleted * a page, so we have to delete the key from the parent page. * * If the delete from the parent page makes it empty, this process may * continue all the way up the tree. We stop if we reach the root page * (which is never deleted, it's just not worth the effort) or if the * delete does not empty the page. */ while ((parent = BT_POP(t)) != NULL) { /* Get the parent page. */ if ((pg = mpool_get(t->bt_mp, parent->pgno, 0)) == NULL) return (RET_ERROR); index = parent->index; bi = GETBINTERNAL(pg, index); /* Free any overflow pages. */ if (bi->flags & P_BIGKEY && __ovfl_delete(t, bi->bytes) == RET_ERROR) { mpool_put(t->bt_mp, pg, 0); return (RET_ERROR); } /* * Free the parent if it has only the one key and it's not the * root page. If it's the rootpage, turn it back into an empty * leaf page. */ if (NEXTINDEX(pg) == 1) if (pg->pgno == P_ROOT) { pg->lower = BTDATAOFF; pg->upper = t->bt_psize; pg->flags = P_BLEAF; } else { if (__bt_relink(t, pg) || __bt_free(t, pg)) return (RET_ERROR); continue; } else { /* Pack remaining key items at the end of the page. */ nksize = NBINTERNAL(bi->ksize); from = (char *)pg + pg->upper; memmove(from + nksize, from, (char *)bi - from); pg->upper += nksize; /* Adjust indices' offsets, shift the indices down. */ offset = pg->linp[index]; for (cnt = index, ip = &pg->linp[0]; cnt--; ++ip) if (ip[0] < offset) ip[0] += nksize; for (cnt = NEXTINDEX(pg) - index; --cnt; ++ip) ip[0] = ip[1] < offset ? ip[1] + nksize : ip[1]; pg->lower -= sizeof(indx_t); } mpool_put(t->bt_mp, pg, MPOOL_DIRTY); break; } /* Free the leaf page, as long as it wasn't the root. */ if (h->pgno == P_ROOT) { mpool_put(t->bt_mp, h, MPOOL_DIRTY); return (RET_SUCCESS); } return (__bt_relink(t, h) || __bt_free(t, h)); } /* * __bt_dleaf -- * Delete a single record from a leaf page. * * Parameters: * t: tree * key: referenced key * h: page * index: index on page to delete * * Returns: * RET_SUCCESS, RET_ERROR. */ int __bt_dleaf(t, key, h, index) BTREE *t; const DBT *key; PAGE *h; u_int index; { BLEAF *bl; indx_t cnt, *ip, offset; u_int32_t nbytes; void *to; char *from; /* If this record is referenced by the cursor, delete the cursor. */ if (F_ISSET(&t->bt_cursor, CURS_INIT) && !F_ISSET(&t->bt_cursor, CURS_ACQUIRE) && t->bt_cursor.pg.pgno == h->pgno && t->bt_cursor.pg.index == index && __bt_curdel(t, key, h, index)) return (RET_ERROR); /* If the entry uses overflow pages, make them available for reuse. */ to = bl = GETBLEAF(h, index); if (bl->flags & P_BIGKEY && __ovfl_delete(t, bl->bytes) == RET_ERROR) return (RET_ERROR); if (bl->flags & P_BIGDATA && __ovfl_delete(t, bl->bytes + bl->ksize) == RET_ERROR) return (RET_ERROR); /* Pack the remaining key/data items at the end of the page. */ nbytes = NBLEAF(bl); from = (char *)h + h->upper; memmove(from + nbytes, from, (char *)to - from); h->upper += nbytes; /* Adjust the indices' offsets, shift the indices down. */ offset = h->linp[index]; for (cnt = index, ip = &h->linp[0]; cnt--; ++ip) if (ip[0] < offset) ip[0] += nbytes; for (cnt = NEXTINDEX(h) - index; --cnt; ++ip) ip[0] = ip[1] < offset ? ip[1] + nbytes : ip[1]; h->lower -= sizeof(indx_t); /* If the cursor is on this page, adjust it as necessary. */ if (F_ISSET(&t->bt_cursor, CURS_INIT) && !F_ISSET(&t->bt_cursor, CURS_ACQUIRE) && t->bt_cursor.pg.pgno == h->pgno && t->bt_cursor.pg.index > index) --t->bt_cursor.pg.index; return (RET_SUCCESS); } /* * __bt_curdel -- * Delete the cursor. * * Parameters: * t: tree * key: referenced key (or NULL) * h: page * index: index on page to delete * * Returns: * RET_SUCCESS, RET_ERROR. */ static int __bt_curdel(t, key, h, index) BTREE *t; const DBT *key; PAGE *h; u_int index; { CURSOR *c; EPG e; PAGE *pg; int curcopy, status; /* * If there are duplicates, move forward or backward to one. * Otherwise, copy the key into the cursor area. */ c = &t->bt_cursor; F_CLR(c, CURS_AFTER | CURS_BEFORE | CURS_ACQUIRE); curcopy = 0; if (!F_ISSET(t, B_NODUPS)) { /* * We're going to have to do comparisons. If we weren't * provided a copy of the key, i.e. the user is deleting * the current cursor position, get one. */ if (key == NULL) { e.page = h; e.index = index; if ((status = __bt_ret(t, &e, &c->key, &c->key, NULL, NULL, 1)) != RET_SUCCESS) return (status); curcopy = 1; key = &c->key; } /* Check previous key, if not at the beginning of the page. */ if (index > 0) { e.page = h; e.index = index - 1; if (__bt_cmp(t, key, &e) == 0) { F_SET(c, CURS_BEFORE); goto dup2; } } /* Check next key, if not at the end of the page. */ if (index < NEXTINDEX(h) - 1) { e.page = h; e.index = index + 1; if (__bt_cmp(t, key, &e) == 0) { F_SET(c, CURS_AFTER); goto dup2; } } /* Check previous key if at the beginning of the page. */ if (index == 0 && h->prevpg != P_INVALID) { if ((pg = mpool_get(t->bt_mp, h->prevpg, 0)) == NULL) return (RET_ERROR); e.page = pg; e.index = NEXTINDEX(pg) - 1; if (__bt_cmp(t, key, &e) == 0) { F_SET(c, CURS_BEFORE); goto dup1; } mpool_put(t->bt_mp, pg, 0); } /* Check next key if at the end of the page. */ if (index == NEXTINDEX(h) - 1 && h->nextpg != P_INVALID) { if ((pg = mpool_get(t->bt_mp, h->nextpg, 0)) == NULL) return (RET_ERROR); e.page = pg; e.index = 0; if (__bt_cmp(t, key, &e) == 0) { F_SET(c, CURS_AFTER); dup1: mpool_put(t->bt_mp, pg, 0); dup2: c->pg.pgno = e.page->pgno; c->pg.index = e.index; return (RET_SUCCESS); } mpool_put(t->bt_mp, pg, 0); } } e.page = h; e.index = index; if (curcopy || (status = __bt_ret(t, &e, &c->key, &c->key, NULL, NULL, 1)) == RET_SUCCESS) { F_SET(c, CURS_ACQUIRE); return (RET_SUCCESS); } return (status); } /* * __bt_relink -- * Link around a deleted page. * * Parameters: * t: tree * h: page to be deleted */ static int __bt_relink(t, h) BTREE *t; PAGE *h; { PAGE *pg; if (h->nextpg != P_INVALID) { if ((pg = mpool_get(t->bt_mp, h->nextpg, 0)) == NULL) return (RET_ERROR); pg->prevpg = h->prevpg; mpool_put(t->bt_mp, pg, MPOOL_DIRTY); } if (h->prevpg != P_INVALID) { if ((pg = mpool_get(t->bt_mp, h->prevpg, 0)) == NULL) return (RET_ERROR); pg->nextpg = h->nextpg; mpool_put(t->bt_mp, pg, MPOOL_DIRTY); } return (0); } vigor-0.016.orig/db/btree/btree.h0100644000076400007640000003440007103707223015230 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)btree.h 8.11 (Berkeley) 8/17/94 */ /* Macros to set/clear/test flags. */ #define F_SET(p, f) (p)->flags |= (f) #define F_CLR(p, f) (p)->flags &= ~(f) #define F_ISSET(p, f) ((p)->flags & (f)) #include #define DEFMINKEYPAGE (2) /* Minimum keys per page */ #define MINCACHE (5) /* Minimum cached pages */ #define MINPSIZE (512) /* Minimum page size */ /* * Page 0 of a btree file contains a copy of the meta-data. This page is also * used as an out-of-band page, i.e. page pointers that point to nowhere point * to page 0. Page 1 is the root of the btree. */ #define P_INVALID 0 /* Invalid tree page number. */ #define P_META 0 /* Tree metadata page number. */ #define P_ROOT 1 /* Tree root page number. */ /* * There are five page layouts in the btree: btree internal pages (BINTERNAL), * btree leaf pages (BLEAF), recno internal pages (RINTERNAL), recno leaf pages * (RLEAF) and overflow pages. All five page types have a page header (PAGE). * This implementation requires that values within structures NOT be padded. * (ANSI C permits random padding.) If your compiler pads randomly you'll have * to do some work to get this package to run. */ typedef struct _page { pgno_t pgno; /* this page's page number */ pgno_t prevpg; /* left sibling */ pgno_t nextpg; /* right sibling */ #define P_BINTERNAL 0x01 /* btree internal page */ #define P_BLEAF 0x02 /* leaf page */ #define P_OVERFLOW 0x04 /* overflow page */ #define P_RINTERNAL 0x08 /* recno internal page */ #define P_RLEAF 0x10 /* leaf page */ #define P_TYPE 0x1f /* type mask */ #define P_PRESERVE 0x20 /* never delete this chain of pages */ u_int32_t flags; indx_t lower; /* lower bound of free space on page */ indx_t upper; /* upper bound of free space on page */ indx_t linp[1]; /* indx_t-aligned VAR. LENGTH DATA */ } PAGE; /* First and next index. */ #define BTDATAOFF \ (sizeof(pgno_t) + sizeof(pgno_t) + sizeof(pgno_t) + \ sizeof(u_int32_t) + sizeof(indx_t) + sizeof(indx_t)) #define NEXTINDEX(p) (((p)->lower - BTDATAOFF) / sizeof(indx_t)) /* * For pages other than overflow pages, there is an array of offsets into the * rest of the page immediately following the page header. Each offset is to * an item which is unique to the type of page. The h_lower offset is just * past the last filled-in index. The h_upper offset is the first item on the * page. Offsets are from the beginning of the page. * * If an item is too big to store on a single page, a flag is set and the item * is a { page, size } pair such that the page is the first page of an overflow * chain with size bytes of item. Overflow pages are simply bytes without any * external structure. * * The page number and size fields in the items are pgno_t-aligned so they can * be manipulated without copying. (This presumes that 32 bit items can be * manipulated on this system.) */ #define LALIGN(n) (((n) + sizeof(pgno_t) - 1) & ~(sizeof(pgno_t) - 1)) #define NOVFLSIZE (sizeof(pgno_t) + sizeof(u_int32_t)) /* * For the btree internal pages, the item is a key. BINTERNALs are {key, pgno} * pairs, such that the key compares less than or equal to all of the records * on that page. For a tree without duplicate keys, an internal page with two * consecutive keys, a and b, will have all records greater than or equal to a * and less than b stored on the page associated with a. Duplicate keys are * somewhat special and can cause duplicate internal and leaf page records and * some minor modifications of the above rule. */ typedef struct _binternal { u_int32_t ksize; /* key size */ pgno_t pgno; /* page number stored on */ #define P_BIGDATA 0x01 /* overflow data */ #define P_BIGKEY 0x02 /* overflow key */ u_char flags; char bytes[1]; /* data */ } BINTERNAL; /* Get the page's BINTERNAL structure at index indx. */ #define GETBINTERNAL(pg, indx) \ ((BINTERNAL *)((char *)(pg) + (pg)->linp[indx])) /* Get the number of bytes in the entry. */ #define NBINTERNAL(len) \ LALIGN(sizeof(u_int32_t) + sizeof(pgno_t) + sizeof(u_char) + (len)) /* Copy a BINTERNAL entry to the page. */ #define WR_BINTERNAL(p, size, pgno, flags) { \ *(u_int32_t *)p = size; \ p += sizeof(u_int32_t); \ *(pgno_t *)p = pgno; \ p += sizeof(pgno_t); \ *(u_char *)p = flags; \ p += sizeof(u_char); \ } /* * For the recno internal pages, the item is a page number with the number of * keys found on that page and below. */ typedef struct _rinternal { recno_t nrecs; /* number of records */ pgno_t pgno; /* page number stored below */ } RINTERNAL; /* Get the page's RINTERNAL structure at index indx. */ #define GETRINTERNAL(pg, indx) \ ((RINTERNAL *)((char *)(pg) + (pg)->linp[indx])) /* Get the number of bytes in the entry. */ #define NRINTERNAL \ LALIGN(sizeof(recno_t) + sizeof(pgno_t)) /* Copy a RINTERAL entry to the page. */ #define WR_RINTERNAL(p, nrecs, pgno) { \ *(recno_t *)p = nrecs; \ p += sizeof(recno_t); \ *(pgno_t *)p = pgno; \ } /* For the btree leaf pages, the item is a key and data pair. */ typedef struct _bleaf { u_int32_t ksize; /* size of key */ u_int32_t dsize; /* size of data */ u_char flags; /* P_BIGDATA, P_BIGKEY */ char bytes[1]; /* data */ } BLEAF; /* Get the page's BLEAF structure at index indx. */ #define GETBLEAF(pg, indx) \ ((BLEAF *)((char *)(pg) + (pg)->linp[indx])) /* Get the number of bytes in the entry. */ #define NBLEAF(p) NBLEAFDBT((p)->ksize, (p)->dsize) /* Get the number of bytes in the user's key/data pair. */ #define NBLEAFDBT(ksize, dsize) \ LALIGN(sizeof(u_int32_t) + sizeof(u_int32_t) + sizeof(u_char) + \ (ksize) + (dsize)) /* Copy a BLEAF entry to the page. */ #define WR_BLEAF(p, key, data, flags) { \ *(u_int32_t *)p = key->size; \ p += sizeof(u_int32_t); \ *(u_int32_t *)p = data->size; \ p += sizeof(u_int32_t); \ *(u_char *)p = flags; \ p += sizeof(u_char); \ memmove(p, key->data, key->size); \ p += key->size; \ memmove(p, data->data, data->size); \ } /* For the recno leaf pages, the item is a data entry. */ typedef struct _rleaf { u_int32_t dsize; /* size of data */ u_char flags; /* P_BIGDATA */ char bytes[1]; } RLEAF; /* Get the page's RLEAF structure at index indx. */ #define GETRLEAF(pg, indx) \ ((RLEAF *)((char *)(pg) + (pg)->linp[indx])) /* Get the number of bytes in the entry. */ #define NRLEAF(p) NRLEAFDBT((p)->dsize) /* Get the number of bytes from the user's data. */ #define NRLEAFDBT(dsize) \ LALIGN(sizeof(u_int32_t) + sizeof(u_char) + (dsize)) /* Copy a RLEAF entry to the page. */ #define WR_RLEAF(p, data, flags) { \ *(u_int32_t *)p = data->size; \ p += sizeof(u_int32_t); \ *(u_char *)p = flags; \ p += sizeof(u_char); \ memmove(p, data->data, data->size); \ } /* * A record in the tree is either a pointer to a page and an index in the page * or a page number and an index. These structures are used as a cursor, stack * entry and search returns as well as to pass records to other routines. * * One comment about searches. Internal page searches must find the largest * record less than key in the tree so that descents work. Leaf page searches * must find the smallest record greater than key so that the returned index * is the record's correct position for insertion. */ typedef struct _epgno { pgno_t pgno; /* the page number */ indx_t index; /* the index on the page */ } EPGNO; typedef struct _epg { PAGE *page; /* the (pinned) page */ indx_t index; /* the index on the page */ } EPG; /* * About cursors. The cursor (and the page that contained the key/data pair * that it referenced) can be deleted, which makes things a bit tricky. If * there are no duplicates of the cursor key in the tree (i.e. B_NODUPS is set * or there simply aren't any duplicates of the key) we copy the key that it * referenced when it's deleted, and reacquire a new cursor key if the cursor * is used again. If there are duplicates keys, we move to the next/previous * key, and set a flag so that we know what happened. NOTE: if duplicate (to * the cursor) keys are added to the tree during this process, it is undefined * if they will be returned or not in a cursor scan. * * The flags determine the possible states of the cursor: * * CURS_INIT The cursor references *something*. * CURS_ACQUIRE The cursor was deleted, and a key has been saved so that * we can reacquire the right position in the tree. * CURS_AFTER, CURS_BEFORE * The cursor was deleted, and now references a key/data pair * that has not yet been returned, either before or after the * deleted key/data pair. * XXX * This structure is broken out so that we can eventually offer multiple * cursors as part of the DB interface. */ typedef struct _cursor { EPGNO pg; /* B: Saved tree reference. */ DBT key; /* B: Saved key, or key.data == NULL. */ recno_t rcursor; /* R: recno cursor (1-based) */ #define CURS_ACQUIRE 0x01 /* B: Cursor needs to be reacquired. */ #define CURS_AFTER 0x02 /* B: Unreturned cursor after key. */ #define CURS_BEFORE 0x04 /* B: Unreturned cursor before key. */ #define CURS_INIT 0x08 /* RB: Cursor initialized. */ u_int8_t flags; } CURSOR; /* * The metadata of the tree. The nrecs field is used only by the RECNO code. * This is because the btree doesn't really need it and it requires that every * put or delete call modify the metadata. */ typedef struct _btmeta { u_int32_t magic; /* magic number */ u_int32_t version; /* version */ u_int32_t psize; /* page size */ u_int32_t free; /* page number of first free page */ u_int32_t nrecs; /* R: number of records */ #define SAVEMETA (B_NODUPS | R_RECNO) u_int32_t flags; /* bt_flags & SAVEMETA */ } BTMETA; /* The in-memory btree/recno data structure. */ typedef struct _btree { MPOOL *bt_mp; /* memory pool cookie */ DB *bt_dbp; /* pointer to enclosing DB */ EPG bt_cur; /* current (pinned) page */ PAGE *bt_pinned; /* page pinned across calls */ CURSOR bt_cursor; /* cursor */ #define BT_PUSH(t, p, i) { \ t->bt_sp->pgno = p; \ t->bt_sp->index = i; \ ++t->bt_sp; \ } #define BT_POP(t) (t->bt_sp == t->bt_stack ? NULL : --t->bt_sp) #define BT_CLR(t) (t->bt_sp = t->bt_stack) EPGNO bt_stack[50]; /* stack of parent pages */ EPGNO *bt_sp; /* current stack pointer */ DBT bt_rkey; /* returned key */ DBT bt_rdata; /* returned data */ int bt_fd; /* tree file descriptor */ pgno_t bt_free; /* next free page */ u_int32_t bt_psize; /* page size */ indx_t bt_ovflsize; /* cut-off for key/data overflow */ int bt_lorder; /* byte order */ /* sorted order */ enum { NOT, BACK, FORWARD } bt_order; EPGNO bt_last; /* last insert */ /* B: key comparison function */ int (*bt_cmp) __P((const DBT *, const DBT *)); /* B: prefix comparison function */ size_t (*bt_pfx) __P((const DBT *, const DBT *)); /* R: recno input function */ int (*bt_irec) __P((struct _btree *, recno_t)); FILE *bt_rfp; /* R: record FILE pointer */ int bt_rfd; /* R: record file descriptor */ caddr_t bt_cmap; /* R: current point in mapped space */ caddr_t bt_smap; /* R: start of mapped space */ caddr_t bt_emap; /* R: end of mapped space */ size_t bt_msize; /* R: size of mapped region. */ recno_t bt_nrecs; /* R: number of records */ size_t bt_reclen; /* R: fixed record length */ u_char bt_bval; /* R: delimiting byte/pad character */ /* * NB: * B_NODUPS and R_RECNO are stored on disk, and may not be changed. */ #define B_INMEM 0x00001 /* in-memory tree */ #define B_METADIRTY 0x00002 /* need to write metadata */ #define B_MODIFIED 0x00004 /* tree modified */ #define B_NEEDSWAP 0x00008 /* if byte order requires swapping */ #define B_RDONLY 0x00010 /* read-only tree */ #define B_NODUPS 0x00020 /* no duplicate keys permitted */ #define R_RECNO 0x00080 /* record oriented tree */ #define R_CLOSEFP 0x00040 /* opened a file pointer */ #define R_EOF 0x00100 /* end of input file reached. */ #define R_FIXLEN 0x00200 /* fixed length records */ #define R_MEMMAPPED 0x00400 /* memory mapped file. */ #define R_INMEM 0x00800 /* in-memory file */ #define R_MODIFIED 0x01000 /* modified file */ #define R_RDONLY 0x02000 /* read-only file */ #define B_DB_LOCK 0x04000 /* DB_LOCK specified. */ #define B_DB_SHMEM 0x08000 /* DB_SHMEM specified. */ #define B_DB_TXN 0x10000 /* DB_TXN specified. */ u_int32_t flags; } BTREE; #include "extern.h" vigor-0.016.orig/db/btree/bt_get.c0100644000076400007640000000626507103707223015376 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_get.c 8.6 (Berkeley) 7/20/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include "btree.h" /* * __BT_GET -- Get a record from the btree. * * Parameters: * dbp: pointer to access method * key: key to find * data: data to return * flag: currently unused * * Returns: * RET_ERROR, RET_SUCCESS and RET_SPECIAL if the key not found. */ int __bt_get(dbp, key, data, flags) const DB *dbp; const DBT *key; DBT *data; u_int flags; { BTREE *t; EPG *e; int exact, status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* Get currently doesn't take any flags. */ if (flags) { errno = EINVAL; return (RET_ERROR); } if ((e = __bt_search(t, key, &exact)) == NULL) return (RET_ERROR); if (!exact) { mpool_put(t->bt_mp, e->page, 0); return (RET_SPECIAL); } status = __bt_ret(t, e, NULL, NULL, data, &t->bt_rdata, 0); /* * If the user is doing concurrent access, we copied the * key/data, toss the page. */ if (F_ISSET(t, B_DB_LOCK)) mpool_put(t->bt_mp, e->page, 0); else t->bt_pinned = e->page; return (status); } vigor-0.016.orig/db/btree/bt_open.c0100644000076400007640000002606207103707223015555 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_open.c 8.10 (Berkeley) 8/17/94"; #endif /* LIBC_SCCS and not lint */ /* * Implementation of btree access method for 4.4BSD. * * The design here was originally based on that of the btree access method * used in the Postgres database system at UC Berkeley. This implementation * is wholly independent of the Postgres code. */ #include #include /* XXX: param.h may not have included types.h */ #include #include #include #include #include #include #include #include #include #include #include "btree.h" #ifdef DEBUG #undef MINPSIZE #define MINPSIZE 128 #endif static int byteorder __P((void)); static int nroot __P((BTREE *)); static int tmp __P((void)); /* * __BT_OPEN -- Open a btree. * * Creates and fills a DB struct, and calls the routine that actually * opens the btree. * * Parameters: * fname: filename (NULL for in-memory trees) * flags: open flag bits * mode: open permission bits * b: BTREEINFO pointer * * Returns: * NULL on failure, pointer to DB on success. * */ DB * __bt_open(fname, flags, mode, openinfo, dflags) const char *fname; int flags, mode, dflags; const BTREEINFO *openinfo; { struct stat sb; BTMETA m; BTREE *t; BTREEINFO b; DB *dbp; pgno_t ncache; int nr, machine_lorder; t = NULL; /* * Intention is to make sure all of the user's selections are okay * here and then use them without checking. Can't be complete, since * we don't know the right page size, lorder or flags until the backing * file is opened. Also, the file's page size can cause the cachesize * to change. */ machine_lorder = byteorder(); if (openinfo) { b = *openinfo; /* Flags: R_DUP. */ if (b.flags & ~(R_DUP)) goto einval; /* * Page size must be indx_t aligned and >= MINPSIZE. Default * page size is set farther on, based on the underlying file * transfer size. */ if (b.psize && (b.psize < MINPSIZE || b.psize > MAX_PAGE_OFFSET + 1 || b.psize & sizeof(indx_t) - 1)) goto einval; /* Minimum number of keys per page; absolute minimum is 2. */ if (b.minkeypage) { if (b.minkeypage < 2) goto einval; } else b.minkeypage = DEFMINKEYPAGE; /* If no comparison, use default comparison and prefix. */ if (b.compare == NULL) { b.compare = __bt_defcmp; if (b.prefix == NULL) b.prefix = __bt_defpfx; } if (b.lorder == 0) b.lorder = machine_lorder; } else { b.compare = __bt_defcmp; b.cachesize = 0; b.flags = 0; b.lorder = machine_lorder; b.minkeypage = DEFMINKEYPAGE; b.prefix = __bt_defpfx; b.psize = 0; } /* Check for the ubiquitous PDP-11. */ if (b.lorder != BIG_ENDIAN && b.lorder != LITTLE_ENDIAN) goto einval; /* Allocate and initialize DB and BTREE structures. */ if ((t = (BTREE *)malloc(sizeof(BTREE))) == NULL) goto err; memset(t, 0, sizeof(BTREE)); t->bt_fd = -1; /* Don't close unopened fd on error. */ t->bt_lorder = b.lorder; t->bt_order = NOT; t->bt_cmp = b.compare; t->bt_pfx = b.prefix; t->bt_rfd = -1; if ((t->bt_dbp = dbp = (DB *)malloc(sizeof(DB))) == NULL) goto err; memset(t->bt_dbp, 0, sizeof(DB)); if (t->bt_lorder != machine_lorder) F_SET(t, B_NEEDSWAP); dbp->type = DB_BTREE; dbp->internal = t; dbp->close = __bt_close; dbp->del = __bt_delete; dbp->fd = __bt_fd; dbp->get = __bt_get; dbp->put = __bt_put; dbp->seq = __bt_seq; dbp->sync = __bt_sync; /* * If no file name was supplied, this is an in-memory btree and we * open a backing temporary file. Otherwise, it's a disk-based tree. */ if (fname) { switch (flags & O_ACCMODE) { case O_RDONLY: F_SET(t, B_RDONLY); break; case O_RDWR: break; case O_WRONLY: default: goto einval; } if ((t->bt_fd = open(fname, flags, mode)) < 0) goto err; } else { if ((flags & O_ACCMODE) != O_RDWR) goto einval; if ((t->bt_fd = tmp()) == -1) goto err; F_SET(t, B_INMEM); } if (fcntl(t->bt_fd, F_SETFD, 1) == -1) goto err; if (fstat(t->bt_fd, &sb)) goto err; if (sb.st_size) { if ((nr = read(t->bt_fd, &m, sizeof(BTMETA))) < 0) goto err; if (nr != sizeof(BTMETA)) goto eftype; /* * Read in the meta-data. This can change the notion of what * the lorder, page size and flags are, and, when the page size * changes, the cachesize value can change too. If the user * specified the wrong byte order for an existing database, we * don't bother to return an error, we just clear the NEEDSWAP * bit. */ if (m.magic == BTREEMAGIC) F_CLR(t, B_NEEDSWAP); else { F_SET(t, B_NEEDSWAP); M_32_SWAP(m.magic); M_32_SWAP(m.version); M_32_SWAP(m.psize); M_32_SWAP(m.free); M_32_SWAP(m.nrecs); M_32_SWAP(m.flags); } if (m.magic != BTREEMAGIC || m.version != BTREEVERSION) goto eftype; if (m.psize < MINPSIZE || m.psize > MAX_PAGE_OFFSET + 1 || m.psize & sizeof(indx_t) - 1) goto eftype; if (m.flags & ~SAVEMETA) goto eftype; b.psize = m.psize; F_SET(t, m.flags); t->bt_free = m.free; t->bt_nrecs = m.nrecs; } else { /* * Set the page size to the best value for I/O to this file. * Don't overflow the page offset type. */ if (b.psize == 0) { #ifdef HAVE_ST_BLKSIZE b.psize = sb.st_blksize; #else b.psize = 4 * 1024; #endif if (b.psize < MINPSIZE) b.psize = MINPSIZE; if (b.psize > MAX_PAGE_OFFSET + 1) b.psize = MAX_PAGE_OFFSET + 1; } /* Set flag if duplicates permitted. */ if (!(b.flags & R_DUP)) F_SET(t, B_NODUPS); t->bt_free = P_INVALID; t->bt_nrecs = 0; F_SET(t, B_METADIRTY); } t->bt_psize = b.psize; /* Set the cache size; must be a multiple of the page size. */ if (b.cachesize && b.cachesize & b.psize - 1) b.cachesize += (~b.cachesize & b.psize - 1) + 1; if (b.cachesize < b.psize * MINCACHE) b.cachesize = b.psize * MINCACHE; /* Calculate number of pages to cache. */ ncache = (b.cachesize + t->bt_psize - 1) / t->bt_psize; /* * The btree data structure requires that at least two keys can fit on * a page, but other than that there's no fixed requirement. The user * specified a minimum number per page, and we translated that into the * number of bytes a key/data pair can use before being placed on an * overflow page. This calculation includes the page header, the size * of the index referencing the leaf item and the size of the leaf item * structure. Also, don't let the user specify a minkeypage such that * a key/data pair won't fit even if both key and data are on overflow * pages. */ t->bt_ovflsize = (t->bt_psize - BTDATAOFF) / b.minkeypage - (sizeof(indx_t) + NBLEAFDBT(0, 0)); if (t->bt_ovflsize < NBLEAFDBT(NOVFLSIZE, NOVFLSIZE) + sizeof(indx_t)) t->bt_ovflsize = NBLEAFDBT(NOVFLSIZE, NOVFLSIZE) + sizeof(indx_t); /* Initialize the buffer pool. */ if ((t->bt_mp = mpool_open(NULL, t->bt_fd, t->bt_psize, ncache)) == NULL) goto err; if (!F_ISSET(t, B_INMEM)) mpool_filter(t->bt_mp, __bt_pgin, __bt_pgout, t); /* Create a root page if new tree. */ if (nroot(t) == RET_ERROR) goto err; /* Global flags. */ if (dflags & DB_LOCK) F_SET(t, B_DB_LOCK); if (dflags & DB_SHMEM) F_SET(t, B_DB_SHMEM); if (dflags & DB_TXN) F_SET(t, B_DB_TXN); return (dbp); einval: errno = EINVAL; goto err; eftype: errno = EFTYPE; goto err; err: if (t) { if (t->bt_dbp) free(t->bt_dbp); if (t->bt_fd != -1) (void)close(t->bt_fd); free(t); } return (NULL); } /* * NROOT -- Create the root of a new tree. * * Parameters: * t: tree * * Returns: * RET_ERROR, RET_SUCCESS */ static int nroot(t) BTREE *t; { PAGE *meta, *root; pgno_t npg; if ((meta = mpool_get(t->bt_mp, 0, 0)) != NULL) { mpool_put(t->bt_mp, meta, 0); return (RET_SUCCESS); } if (errno != EINVAL) /* It's OK to not exist. */ return (RET_ERROR); errno = 0; if ((meta = mpool_new(t->bt_mp, &npg)) == NULL) return (RET_ERROR); if ((root = mpool_new(t->bt_mp, &npg)) == NULL) return (RET_ERROR); if (npg != P_ROOT) return (RET_ERROR); root->pgno = npg; root->prevpg = root->nextpg = P_INVALID; root->lower = BTDATAOFF; root->upper = t->bt_psize; root->flags = P_BLEAF; memset(meta, 0, t->bt_psize); mpool_put(t->bt_mp, meta, MPOOL_DIRTY); mpool_put(t->bt_mp, root, MPOOL_DIRTY); return (RET_SUCCESS); } static int tmp() { sigset_t set, oset; int fd; char *envtmp; char path[MAXPATHLEN]; envtmp = getenv("TMPDIR"); (void)snprintf(path, sizeof(path), "%s/bt.XXXXXX", envtmp ? envtmp : "/tmp"); (void)sigfillset(&set); (void)sigprocmask(SIG_BLOCK, &set, &oset); if ((fd = mkstemp(path)) != -1) (void)unlink(path); (void)sigprocmask(SIG_SETMASK, &oset, NULL); return(fd); } static int byteorder() { u_int32_t x; u_char *p; x = 0x01020304; p = (u_char *)&x; switch (*p) { case 1: return (BIG_ENDIAN); case 4: return (LITTLE_ENDIAN); default: return (0); } } int __bt_fd(dbp) const DB *dbp; { BTREE *t; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* In-memory database can't have a file descriptor. */ if (F_ISSET(t, B_INMEM)) { errno = ENOENT; return (-1); } return (t->bt_fd); } vigor-0.016.orig/db/btree/bt_overflow.c0100644000076400007640000001347607103707223016464 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_overflow.c 8.5 (Berkeley) 7/16/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include "btree.h" /* * Big key/data code. * * Big key and data entries are stored on linked lists of pages. The initial * reference is byte string stored with the key or data and is the page number * and size. The actual record is stored in a chain of pages linked by the * nextpg field of the PAGE header. * * The first page of the chain has a special property. If the record is used * by an internal page, it cannot be deleted and the P_PRESERVE bit will be set * in the header. * * XXX * A single DBT is written to each chain, so a lot of space on the last page * is wasted. This is a fairly major bug for some data sets. */ /* * __OVFL_GET -- Get an overflow key/data item. * * Parameters: * t: tree * p: pointer to { pgno_t, u_int32_t } * buf: storage address * bufsz: storage size * * Returns: * RET_ERROR, RET_SUCCESS */ int __ovfl_get(t, p, ssz, buf, bufsz) BTREE *t; void *p; size_t *ssz; void **buf; size_t *bufsz; { PAGE *h; pgno_t pg; size_t nb, plen; u_int32_t sz; memmove(&pg, p, sizeof(pgno_t)); memmove(&sz, (char *)p + sizeof(pgno_t), sizeof(u_int32_t)); *ssz = sz; #ifdef DEBUG if (pg == P_INVALID || sz == 0) abort(); #endif /* Make the buffer bigger as necessary. */ if (*bufsz < sz) { *buf = (char *)(*buf == NULL ? malloc(sz) : realloc(*buf, sz)); if (*buf == NULL) return (RET_ERROR); *bufsz = sz; } /* * Step through the linked list of pages, copying the data on each one * into the buffer. Never copy more than the data's length. */ plen = t->bt_psize - BTDATAOFF; for (p = *buf;; p = (char *)p + nb, pg = h->nextpg) { if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); nb = MIN(sz, plen); memmove(p, (char *)h + BTDATAOFF, nb); mpool_put(t->bt_mp, h, 0); if ((sz -= nb) == 0) break; } return (RET_SUCCESS); } /* * __OVFL_PUT -- Store an overflow key/data item. * * Parameters: * t: tree * data: DBT to store * pgno: storage page number * * Returns: * RET_ERROR, RET_SUCCESS */ int __ovfl_put(t, dbt, pg) BTREE *t; const DBT *dbt; pgno_t *pg; { PAGE *h, *last; void *p; pgno_t npg; size_t nb, plen; u_int32_t sz; /* * Allocate pages and copy the key/data record into them. Store the * number of the first page in the chain. */ plen = t->bt_psize - BTDATAOFF; for (last = NULL, p = dbt->data, sz = dbt->size;; p = (char *)p + plen, last = h) { if ((h = __bt_new(t, &npg)) == NULL) return (RET_ERROR); h->pgno = npg; h->nextpg = h->prevpg = P_INVALID; h->flags = P_OVERFLOW; h->lower = h->upper = 0; nb = MIN(sz, plen); memmove((char *)h + BTDATAOFF, p, nb); if (last) { last->nextpg = h->pgno; mpool_put(t->bt_mp, last, MPOOL_DIRTY); } else *pg = h->pgno; if ((sz -= nb) == 0) { mpool_put(t->bt_mp, h, MPOOL_DIRTY); break; } } return (RET_SUCCESS); } /* * __OVFL_DELETE -- Delete an overflow chain. * * Parameters: * t: tree * p: pointer to { pgno_t, u_int32_t } * * Returns: * RET_ERROR, RET_SUCCESS */ int __ovfl_delete(t, p) BTREE *t; void *p; { PAGE *h; pgno_t pg; size_t plen; u_int32_t sz; memmove(&pg, p, sizeof(pgno_t)); memmove(&sz, (char *)p + sizeof(pgno_t), sizeof(u_int32_t)); #ifdef DEBUG if (pg == P_INVALID || sz == 0) abort(); #endif if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); /* Don't delete chains used by internal pages. */ if (h->flags & P_PRESERVE) { mpool_put(t->bt_mp, h, 0); return (RET_SUCCESS); } /* Step through the chain, calling the free routine for each page. */ for (plen = t->bt_psize - BTDATAOFF;; sz -= plen) { pg = h->nextpg; __bt_free(t, h); if (sz <= plen) break; if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); } return (RET_SUCCESS); } vigor-0.016.orig/db/btree/bt_page.c0100644000076400007640000000560507103707223015530 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_page.c 8.3 (Berkeley) 7/14/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include "btree.h" /* * __bt_free -- * Put a page on the freelist. * * Parameters: * t: tree * h: page to free * * Returns: * RET_ERROR, RET_SUCCESS * * Side-effect: * mpool_put's the page. */ int __bt_free(t, h) BTREE *t; PAGE *h; { /* Insert the page at the head of the free list. */ h->prevpg = P_INVALID; h->nextpg = t->bt_free; t->bt_free = h->pgno; /* Make sure the page gets written back. */ return (mpool_put(t->bt_mp, h, MPOOL_DIRTY)); } /* * __bt_new -- * Get a new page, preferably from the freelist. * * Parameters: * t: tree * npg: storage for page number. * * Returns: * Pointer to a page, NULL on error. */ PAGE * __bt_new(t, npg) BTREE *t; pgno_t *npg; { PAGE *h; if (t->bt_free != P_INVALID && (h = mpool_get(t->bt_mp, t->bt_free, 0)) != NULL) { *npg = t->bt_free; t->bt_free = h->nextpg; return (h); } return (mpool_new(t->bt_mp, npg)); } vigor-0.016.orig/db/btree/bt_put.c0100644000076400007640000002074507103707223015426 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_put.c 8.8 (Berkeley) 7/26/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include "btree.h" static EPG *bt_fast __P((BTREE *, const DBT *, const DBT *, int *)); /* * __BT_PUT -- Add a btree item to the tree. * * Parameters: * dbp: pointer to access method * key: key * data: data * flag: R_NOOVERWRITE * * Returns: * RET_ERROR, RET_SUCCESS and RET_SPECIAL if the key is already in the * tree and R_NOOVERWRITE specified. */ int __bt_put(dbp, key, data, flags) const DB *dbp; DBT *key; const DBT *data; u_int flags; { BTREE *t; DBT tkey, tdata; EPG *e; PAGE *h; indx_t index, nxtindex; pgno_t pg; u_int32_t nbytes; int dflags, exact, status; char *dest, db[NOVFLSIZE], kb[NOVFLSIZE]; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* Check for change to a read-only tree. */ if (F_ISSET(t, B_RDONLY)) { errno = EPERM; return (RET_ERROR); } switch (flags) { case 0: case R_NOOVERWRITE: break; case R_CURSOR: /* * If flags is R_CURSOR, put the cursor. Must already * have started a scan and not have already deleted it. */ if (F_ISSET(&t->bt_cursor, CURS_INIT) && !F_ISSET(&t->bt_cursor, CURS_ACQUIRE | CURS_AFTER | CURS_BEFORE)) break; /* FALLTHROUGH */ default: errno = EINVAL; return (RET_ERROR); } /* * If the key/data pair won't fit on a page, store it on overflow * pages. Only put the key on the overflow page if the pair are * still too big after moving the data to an overflow page. * * XXX * If the insert fails later on, the overflow pages aren't recovered. */ dflags = 0; if (key->size + data->size > t->bt_ovflsize) { if (key->size > t->bt_ovflsize) { storekey: if (__ovfl_put(t, key, &pg) == RET_ERROR) return (RET_ERROR); tkey.data = kb; tkey.size = NOVFLSIZE; memmove(kb, &pg, sizeof(pgno_t)); memmove(kb + sizeof(pgno_t), &key->size, sizeof(u_int32_t)); dflags |= P_BIGKEY; key = &tkey; } if (key->size + data->size > t->bt_ovflsize) { if (__ovfl_put(t, data, &pg) == RET_ERROR) return (RET_ERROR); tdata.data = db; tdata.size = NOVFLSIZE; memmove(db, &pg, sizeof(pgno_t)); memmove(db + sizeof(pgno_t), &data->size, sizeof(u_int32_t)); dflags |= P_BIGDATA; data = &tdata; } if (key->size + data->size > t->bt_ovflsize) goto storekey; } /* Replace the cursor. */ if (flags == R_CURSOR) { if ((h = mpool_get(t->bt_mp, t->bt_cursor.pg.pgno, 0)) == NULL) return (RET_ERROR); index = t->bt_cursor.pg.index; goto delete; } /* * Find the key to delete, or, the location at which to insert. * Bt_fast and __bt_search both pin the returned page. */ if (t->bt_order == NOT || (e = bt_fast(t, key, data, &exact)) == NULL) if ((e = __bt_search(t, key, &exact)) == NULL) return (RET_ERROR); h = e->page; index = e->index; /* * Add the key/data pair to the tree. If an identical key is already * in the tree, and R_NOOVERWRITE is set, an error is returned. If * R_NOOVERWRITE is not set, the key is either added (if duplicates are * permitted) or an error is returned. */ switch (flags) { case R_NOOVERWRITE: if (!exact) break; mpool_put(t->bt_mp, h, 0); return (RET_SPECIAL); default: if (!exact || !F_ISSET(t, B_NODUPS)) break; /* * !!! * Note, the delete may empty the page, so we need to put a * new entry into the page immediately. */ delete: if (__bt_dleaf(t, key, h, index) == RET_ERROR) { mpool_put(t->bt_mp, h, 0); return (RET_ERROR); } break; } /* * If not enough room, or the user has put a ceiling on the number of * keys permitted in the page, split the page. The split code will * insert the key and data and unpin the current page. If inserting * into the offset array, shift the pointers up. */ nbytes = NBLEAFDBT(key->size, data->size); if (h->upper - h->lower < nbytes + sizeof(indx_t)) { if ((status = __bt_split(t, h, key, data, dflags, nbytes, index)) != RET_SUCCESS) return (status); goto success; } if (index < (nxtindex = NEXTINDEX(h))) memmove(h->linp + index + 1, h->linp + index, (nxtindex - index) * sizeof(indx_t)); h->lower += sizeof(indx_t); h->linp[index] = h->upper -= nbytes; dest = (char *)h + h->upper; WR_BLEAF(dest, key, data, dflags); /* If the cursor is on this page, adjust it as necessary. */ if (F_ISSET(&t->bt_cursor, CURS_INIT) && !F_ISSET(&t->bt_cursor, CURS_ACQUIRE) && t->bt_cursor.pg.pgno == h->pgno && t->bt_cursor.pg.index >= index) ++t->bt_cursor.pg.index; if (t->bt_order == NOT) if (h->nextpg == P_INVALID) { if (index == NEXTINDEX(h) - 1) { t->bt_order = FORWARD; t->bt_last.index = index; t->bt_last.pgno = h->pgno; } } else if (h->prevpg == P_INVALID) { if (index == 0) { t->bt_order = BACK; t->bt_last.index = 0; t->bt_last.pgno = h->pgno; } } mpool_put(t->bt_mp, h, MPOOL_DIRTY); success: if (flags == R_SETCURSOR) __bt_setcur(t, e->page->pgno, e->index); F_SET(t, B_MODIFIED); return (RET_SUCCESS); } #ifdef STATISTICS u_long bt_cache_hit, bt_cache_miss; #endif /* * BT_FAST -- Do a quick check for sorted data. * * Parameters: * t: tree * key: key to insert * * Returns: * EPG for new record or NULL if not found. */ static EPG * bt_fast(t, key, data, exactp) BTREE *t; const DBT *key, *data; int *exactp; { PAGE *h; u_int32_t nbytes; int cmp; if ((h = mpool_get(t->bt_mp, t->bt_last.pgno, 0)) == NULL) { t->bt_order = NOT; return (NULL); } t->bt_cur.page = h; t->bt_cur.index = t->bt_last.index; /* * If won't fit in this page or have too many keys in this page, * have to search to get split stack. */ nbytes = NBLEAFDBT(key->size, data->size); if (h->upper - h->lower < nbytes + sizeof(indx_t)) goto miss; if (t->bt_order == FORWARD) { if (t->bt_cur.page->nextpg != P_INVALID) goto miss; if (t->bt_cur.index != NEXTINDEX(h) - 1) goto miss; if ((cmp = __bt_cmp(t, key, &t->bt_cur)) < 0) goto miss; t->bt_last.index = cmp ? ++t->bt_cur.index : t->bt_cur.index; } else { if (t->bt_cur.page->prevpg != P_INVALID) goto miss; if (t->bt_cur.index != 0) goto miss; if ((cmp = __bt_cmp(t, key, &t->bt_cur)) > 0) goto miss; t->bt_last.index = 0; } *exactp = cmp == 0; #ifdef STATISTICS ++bt_cache_hit; #endif return (&t->bt_cur); miss: #ifdef STATISTICS ++bt_cache_miss; #endif t->bt_order = NOT; mpool_put(t->bt_mp, h, 0); return (NULL); } vigor-0.016.orig/db/btree/bt_search.c0100644000076400007640000001336607103707223016064 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_search.c 8.8 (Berkeley) 7/31/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include "btree.h" static int __bt_snext __P((BTREE *, PAGE *, const DBT *, int *)); static int __bt_sprev __P((BTREE *, PAGE *, const DBT *, int *)); /* * __bt_search -- * Search a btree for a key. * * Parameters: * t: tree to search * key: key to find * exactp: pointer to exact match flag * * Returns: * The EPG for matching record, if any, or the EPG for the location * of the key, if it were inserted into the tree, is entered into * the bt_cur field of the tree. A pointer to the field is returned. */ EPG * __bt_search(t, key, exactp) BTREE *t; const DBT *key; int *exactp; { PAGE *h; indx_t base, index, lim; pgno_t pg; int cmp; BT_CLR(t); for (pg = P_ROOT;;) { if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (NULL); /* Do a binary search on the current page. */ t->bt_cur.page = h; for (base = 0, lim = NEXTINDEX(h); lim; lim >>= 1) { t->bt_cur.index = index = base + (lim >> 1); if ((cmp = __bt_cmp(t, key, &t->bt_cur)) == 0) { if (h->flags & P_BLEAF) { *exactp = 1; return (&t->bt_cur); } goto next; } if (cmp > 0) { base = index + 1; --lim; } } /* * If it's a leaf page, we're almost done. If no duplicates * are allowed, or we have an exact match, we're done. Else, * it's possible that there were matching keys on this page, * which later deleted, and we're on a page with no matches * while there are matches on other pages. If at the start or * end of a page, check the adjacent page. */ if (h->flags & P_BLEAF) { if (!F_ISSET(t, B_NODUPS)) { if (base == 0 && h->prevpg != P_INVALID && __bt_sprev(t, h, key, exactp)) return (&t->bt_cur); if (base == NEXTINDEX(h) && h->nextpg != P_INVALID && __bt_snext(t, h, key, exactp)) return (&t->bt_cur); } *exactp = 0; t->bt_cur.index = base; return (&t->bt_cur); } /* * No match found. Base is the smallest index greater than * key and may be zero or a last + 1 index. If it's non-zero, * decrement by one, and record the internal page which should * be a parent page for the key. If a split later occurs, the * inserted page will be to the right of the saved page. */ index = base ? base - 1 : base; next: BT_PUSH(t, h->pgno, index); pg = GETBINTERNAL(h, index)->pgno; mpool_put(t->bt_mp, h, 0); } } /* * __bt_snext -- * Check for an exact match after the key. * * Parameters: * t: tree * h: current page * key: key * exactp: pointer to exact match flag * * Returns: * If an exact match found. */ static int __bt_snext(t, h, key, exactp) BTREE *t; PAGE *h; const DBT *key; int *exactp; { EPG e; /* * Get the next page. The key is either an exact * match, or not as good as the one we already have. */ if ((e.page = mpool_get(t->bt_mp, h->nextpg, 0)) == NULL) return (0); e.index = 0; if (__bt_cmp(t, key, &e) == 0) { mpool_put(t->bt_mp, h, 0); t->bt_cur = e; *exactp = 1; return (1); } mpool_put(t->bt_mp, e.page, 0); return (0); } /* * __bt_sprev -- * Check for an exact match before the key. * * Parameters: * t: tree * h: current page * key: key * exactp: pointer to exact match flag * * Returns: * If an exact match found. */ static int __bt_sprev(t, h, key, exactp) BTREE *t; PAGE *h; const DBT *key; int *exactp; { EPG e; /* * Get the previous page. The key is either an exact * match, or not as good as the one we already have. */ if ((e.page = mpool_get(t->bt_mp, h->prevpg, 0)) == NULL) return (0); e.index = NEXTINDEX(e.page) - 1; if (__bt_cmp(t, key, &e) == 0) { mpool_put(t->bt_mp, h, 0); t->bt_cur = e; *exactp = 1; return (1); } mpool_put(t->bt_mp, e.page, 0); return (0); } vigor-0.016.orig/db/btree/bt_seq.c0100644000076400007640000002661107103707223015404 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_seq.c 8.7 (Berkeley) 7/20/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include "btree.h" static int __bt_first __P((BTREE *, const DBT *, EPG *, int *)); static int __bt_seqadv __P((BTREE *, EPG *, int)); static int __bt_seqset __P((BTREE *, EPG *, DBT *, int)); /* * Sequential scan support. * * The tree can be scanned sequentially, starting from either end of the * tree or from any specific key. A scan request before any scanning is * done is initialized as starting from the least node. */ /* * __bt_seq -- * Btree sequential scan interface. * * Parameters: * dbp: pointer to access method * key: key for positioning and return value * data: data return value * flags: R_CURSOR, R_FIRST, R_LAST, R_NEXT, R_PREV. * * Returns: * RET_ERROR, RET_SUCCESS or RET_SPECIAL if there's no next key. */ int __bt_seq(dbp, key, data, flags) const DB *dbp; DBT *key, *data; u_int flags; { BTREE *t; EPG e; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* * If scan unitialized as yet, or starting at a specific record, set * the scan to a specific key. Both __bt_seqset and __bt_seqadv pin * the page the cursor references if they're successful. */ switch (flags) { case R_NEXT: case R_PREV: if (F_ISSET(&t->bt_cursor, CURS_INIT)) { status = __bt_seqadv(t, &e, flags); break; } /* FALLTHROUGH */ case R_FIRST: case R_LAST: case R_CURSOR: status = __bt_seqset(t, &e, key, flags); break; default: errno = EINVAL; return (RET_ERROR); } if (status == RET_SUCCESS) { __bt_setcur(t, e.page->pgno, e.index); status = __bt_ret(t, &e, key, &t->bt_rkey, data, &t->bt_rdata, 0); /* * If the user is doing concurrent access, we copied the * key/data, toss the page. */ if (F_ISSET(t, B_DB_LOCK)) mpool_put(t->bt_mp, e.page, 0); else t->bt_pinned = e.page; } return (status); } /* * __bt_seqset -- * Set the sequential scan to a specific key. * * Parameters: * t: tree * ep: storage for returned key * key: key for initial scan position * flags: R_CURSOR, R_FIRST, R_LAST, R_NEXT, R_PREV * * Side effects: * Pins the page the cursor references. * * Returns: * RET_ERROR, RET_SUCCESS or RET_SPECIAL if there's no next key. */ static int __bt_seqset(t, ep, key, flags) BTREE *t; EPG *ep; DBT *key; int flags; { PAGE *h; pgno_t pg; int exact; /* * Find the first, last or specific key in the tree and point the * cursor at it. The cursor may not be moved until a new key has * been found. */ switch (flags) { case R_CURSOR: /* Keyed scan. */ /* * Find the first instance of the key or the smallest key * which is greater than or equal to the specified key. */ if (key->data == NULL || key->size == 0) { errno = EINVAL; return (RET_ERROR); } return (__bt_first(t, key, ep, &exact)); case R_FIRST: /* First record. */ case R_NEXT: /* Walk down the left-hand side of the tree. */ for (pg = P_ROOT;;) { if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); /* Check for an empty tree. */ if (NEXTINDEX(h) == 0) { mpool_put(t->bt_mp, h, 0); return (RET_SPECIAL); } if (h->flags & (P_BLEAF | P_RLEAF)) break; pg = GETBINTERNAL(h, 0)->pgno; mpool_put(t->bt_mp, h, 0); } ep->page = h; ep->index = 0; break; case R_LAST: /* Last record. */ case R_PREV: /* Walk down the right-hand side of the tree. */ for (pg = P_ROOT;;) { if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); /* Check for an empty tree. */ if (NEXTINDEX(h) == 0) { mpool_put(t->bt_mp, h, 0); return (RET_SPECIAL); } if (h->flags & (P_BLEAF | P_RLEAF)) break; pg = GETBINTERNAL(h, NEXTINDEX(h) - 1)->pgno; mpool_put(t->bt_mp, h, 0); } ep->page = h; ep->index = NEXTINDEX(h) - 1; break; } return (RET_SUCCESS); } /* * __bt_seqadvance -- * Advance the sequential scan. * * Parameters: * t: tree * flags: R_NEXT, R_PREV * * Side effects: * Pins the page the new key/data record is on. * * Returns: * RET_ERROR, RET_SUCCESS or RET_SPECIAL if there's no next key. */ static int __bt_seqadv(t, ep, flags) BTREE *t; EPG *ep; int flags; { CURSOR *c; PAGE *h; indx_t index; pgno_t pg; int exact; /* * There are a couple of states that we can be in. The cursor has * been initialized by the time we get here, but that's all we know. */ c = &t->bt_cursor; /* * The cursor was deleted where there weren't any duplicate records, * so the key was saved. Find out where that key would go in the * current tree. It doesn't matter if the returned key is an exact * match or not -- if it's an exact match, the record was added after * the delete so we can just return it. If not, as long as there's * a record there, return it. */ if (F_ISSET(c, CURS_ACQUIRE)) return (__bt_first(t, &c->key, ep, &exact)); /* Get the page referenced by the cursor. */ if ((h = mpool_get(t->bt_mp, c->pg.pgno, 0)) == NULL) return (RET_ERROR); /* * Find the next/previous record in the tree and point the cursor at * it. The cursor may not be moved until a new key has been found. */ switch (flags) { case R_NEXT: /* Next record. */ /* * The cursor was deleted in duplicate records, and moved * forward to a record that has yet to be returned. Clear * that flag, and return the record. */ if (F_ISSET(c, CURS_AFTER)) goto usecurrent; index = c->pg.index; if (++index == NEXTINDEX(h)) { pg = h->nextpg; mpool_put(t->bt_mp, h, 0); if (pg == P_INVALID) return (RET_SPECIAL); if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); index = 0; } break; case R_PREV: /* Previous record. */ /* * The cursor was deleted in duplicate records, and moved * backward to a record that has yet to be returned. Clear * that flag, and return the record. */ if (F_ISSET(c, CURS_BEFORE)) { usecurrent: F_CLR(c, CURS_AFTER | CURS_BEFORE); ep->page = h; ep->index = c->pg.index; return (RET_SUCCESS); } index = c->pg.index; if (index == 0) { pg = h->prevpg; mpool_put(t->bt_mp, h, 0); if (pg == P_INVALID) return (RET_SPECIAL); if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); index = NEXTINDEX(h) - 1; } else --index; break; } ep->page = h; ep->index = index; return (RET_SUCCESS); } /* * __bt_first -- * Find the first entry. * * Parameters: * t: the tree * key: the key * erval: return EPG * exactp: pointer to exact match flag * * Returns: * The first entry in the tree greater than or equal to key, * or RET_SPECIAL if no such key exists. */ static int __bt_first(t, key, erval, exactp) BTREE *t; const DBT *key; EPG *erval; int *exactp; { PAGE *h; EPG *ep, save; pgno_t pg; /* * Find any matching record; __bt_search pins the page. * * If it's an exact match and duplicates are possible, walk backwards * in the tree until we find the first one. Otherwise, make sure it's * a valid key (__bt_search may return an index just past the end of a * page) and return it. */ if ((ep = __bt_search(t, key, exactp)) == NULL) return (RET_SPECIAL); if (*exactp) { if (F_ISSET(t, B_NODUPS)) { *erval = *ep; return (RET_SUCCESS); } /* * Walk backwards, as long as the entry matches and there are * keys left in the tree. Save a copy of each match in case * we go too far. */ save = *ep; h = ep->page; do { if (save.page->pgno != ep->page->pgno) { mpool_put(t->bt_mp, save.page, 0); save = *ep; } else save.index = ep->index; /* * Don't unpin the page the last (or original) match * was on, but make sure it's unpinned if an error * occurs. */ if (ep->index == 0) { if (h->prevpg == P_INVALID) break; if (h->pgno != save.page->pgno) mpool_put(t->bt_mp, h, 0); if ((h = mpool_get(t->bt_mp, h->prevpg, 0)) == NULL) { if (h->pgno == save.page->pgno) mpool_put(t->bt_mp, save.page, 0); return (RET_ERROR); } ep->page = h; ep->index = NEXTINDEX(h); } --ep->index; } while (__bt_cmp(t, key, ep) == 0); /* * Reach here with the last page that was looked at pinned, * which may or may not be the same as the last (or original) * match page. If it's not useful, release it. */ if (h->pgno != save.page->pgno) mpool_put(t->bt_mp, h, 0); *erval = save; return (RET_SUCCESS); } /* If at the end of a page, find the next entry. */ if (ep->index == NEXTINDEX(ep->page)) { h = ep->page; pg = h->nextpg; mpool_put(t->bt_mp, h, 0); if (pg == P_INVALID) return (RET_SPECIAL); if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); ep->index = 0; ep->page = h; } *erval = *ep; return (RET_SUCCESS); } /* * __bt_setcur -- * Set the cursor to an entry in the tree. * * Parameters: * t: the tree * pgno: page number * index: page index */ void __bt_setcur(t, pgno, index) BTREE *t; pgno_t pgno; u_int index; { /* Lose any already deleted key. */ if (t->bt_cursor.key.data != NULL) { free(t->bt_cursor.key.data); t->bt_cursor.key.size = 0; t->bt_cursor.key.data = NULL; } F_CLR(&t->bt_cursor, CURS_ACQUIRE | CURS_AFTER | CURS_BEFORE); /* Update the cursor. */ t->bt_cursor.pg.pgno = pgno; t->bt_cursor.pg.index = index; F_SET(&t->bt_cursor, CURS_INIT); } vigor-0.016.orig/db/btree/bt_split.c0100644000076400007640000005334007103707223015746 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_split.c 8.9 (Berkeley) 7/26/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include "btree.h" static int bt_broot __P((BTREE *, PAGE *, PAGE *, PAGE *)); static PAGE *bt_page __P((BTREE *, PAGE *, PAGE **, PAGE **, indx_t *, size_t)); static int bt_preserve __P((BTREE *, pgno_t)); static PAGE *bt_psplit __P((BTREE *, PAGE *, PAGE *, PAGE *, indx_t *, size_t)); static PAGE *bt_root __P((BTREE *, PAGE *, PAGE **, PAGE **, indx_t *, size_t)); static int bt_rroot __P((BTREE *, PAGE *, PAGE *, PAGE *)); static recno_t rec_total __P((PAGE *)); #ifdef STATISTICS u_long bt_rootsplit, bt_split, bt_sortsplit, bt_pfxsaved; #endif /* * __BT_SPLIT -- Split the tree. * * Parameters: * t: tree * sp: page to split * key: key to insert * data: data to insert * flags: BIGKEY/BIGDATA flags * ilen: insert length * skip: index to leave open * * Returns: * RET_ERROR, RET_SUCCESS */ int __bt_split(t, sp, key, data, flags, ilen, argskip) BTREE *t; PAGE *sp; const DBT *key, *data; int flags; size_t ilen; u_int32_t argskip; { BINTERNAL *bi; BLEAF *bl, *tbl; DBT a, b; EPGNO *parent; PAGE *h, *l, *r, *lchild, *rchild; indx_t nxtindex; u_int16_t skip; u_int32_t n, nbytes, nksize; int parentsplit; char *dest; /* * Split the page into two pages, l and r. The split routines return * a pointer to the page into which the key should be inserted and with * skip set to the offset which should be used. Additionally, l and r * are pinned. */ skip = argskip; h = sp->pgno == P_ROOT ? bt_root(t, sp, &l, &r, &skip, ilen) : bt_page(t, sp, &l, &r, &skip, ilen); if (h == NULL) return (RET_ERROR); /* * Insert the new key/data pair into the leaf page. (Key inserts * always cause a leaf page to split first.) */ h->linp[skip] = h->upper -= ilen; dest = (char *)h + h->upper; if (F_ISSET(t, R_RECNO)) WR_RLEAF(dest, data, flags) else WR_BLEAF(dest, key, data, flags) /* If the root page was split, make it look right. */ if (sp->pgno == P_ROOT && (F_ISSET(t, R_RECNO) ? bt_rroot(t, sp, l, r) : bt_broot(t, sp, l, r)) == RET_ERROR) goto err2; /* * Now we walk the parent page stack -- a LIFO stack of the pages that * were traversed when we searched for the page that split. Each stack * entry is a page number and a page index offset. The offset is for * the page traversed on the search. We've just split a page, so we * have to insert a new key into the parent page. * * If the insert into the parent page causes it to split, may have to * continue splitting all the way up the tree. We stop if the root * splits or the page inserted into didn't have to split to hold the * new key. Some algorithms replace the key for the old page as well * as the new page. We don't, as there's no reason to believe that the * first key on the old page is any better than the key we have, and, * in the case of a key being placed at index 0 causing the split, the * key is unavailable. * * There are a maximum of 5 pages pinned at any time. We keep the left * and right pages pinned while working on the parent. The 5 are the * two children, left parent and right parent (when the parent splits) * and the root page or the overflow key page when calling bt_preserve. * This code must make sure that all pins are released other than the * root page or overflow page which is unlocked elsewhere. */ while ((parent = BT_POP(t)) != NULL) { lchild = l; rchild = r; /* Get the parent page. */ if ((h = mpool_get(t->bt_mp, parent->pgno, 0)) == NULL) goto err2; /* * The new key goes ONE AFTER the index, because the split * was to the right. */ skip = parent->index + 1; /* * Calculate the space needed on the parent page. * * Prefix trees: space hack when inserting into BINTERNAL * pages. Retain only what's needed to distinguish between * the new entry and the LAST entry on the page to its left. * If the keys compare equal, retain the entire key. Note, * we don't touch overflow keys, and the entire key must be * retained for the next-to-left most key on the leftmost * page of each level, or the search will fail. Applicable * ONLY to internal pages that have leaf pages as children. * Further reduction of the key between pairs of internal * pages loses too much information. */ switch (rchild->flags & P_TYPE) { case P_BINTERNAL: bi = GETBINTERNAL(rchild, 0); nbytes = NBINTERNAL(bi->ksize); break; case P_BLEAF: bl = GETBLEAF(rchild, 0); nbytes = NBINTERNAL(bl->ksize); if (t->bt_pfx && !(bl->flags & P_BIGKEY) && (h->prevpg != P_INVALID || skip > 1)) { tbl = GETBLEAF(lchild, NEXTINDEX(lchild) - 1); a.size = tbl->ksize; a.data = tbl->bytes; b.size = bl->ksize; b.data = bl->bytes; nksize = t->bt_pfx(&a, &b); n = NBINTERNAL(nksize); if (n < nbytes) { #ifdef STATISTICS bt_pfxsaved += nbytes - n; #endif nbytes = n; } else nksize = 0; } else nksize = 0; break; case P_RINTERNAL: case P_RLEAF: nbytes = NRINTERNAL; break; default: abort(); } /* Split the parent page if necessary or shift the indices. */ if (h->upper - h->lower < nbytes + sizeof(indx_t)) { sp = h; h = h->pgno == P_ROOT ? bt_root(t, h, &l, &r, &skip, nbytes) : bt_page(t, h, &l, &r, &skip, nbytes); if (h == NULL) goto err1; parentsplit = 1; } else { if (skip < (nxtindex = NEXTINDEX(h))) memmove(h->linp + skip + 1, h->linp + skip, (nxtindex - skip) * sizeof(indx_t)); h->lower += sizeof(indx_t); parentsplit = 0; } /* Insert the key into the parent page. */ switch (rchild->flags & P_TYPE) { case P_BINTERNAL: h->linp[skip] = h->upper -= nbytes; dest = (char *)h + h->linp[skip]; memmove(dest, bi, nbytes); ((BINTERNAL *)dest)->pgno = rchild->pgno; break; case P_BLEAF: h->linp[skip] = h->upper -= nbytes; dest = (char *)h + h->linp[skip]; WR_BINTERNAL(dest, nksize ? nksize : bl->ksize, rchild->pgno, bl->flags & P_BIGKEY); memmove(dest, bl->bytes, nksize ? nksize : bl->ksize); if (bl->flags & P_BIGKEY && bt_preserve(t, *(pgno_t *)bl->bytes) == RET_ERROR) goto err1; break; case P_RINTERNAL: /* * Update the left page count. If split * added at index 0, fix the correct page. */ if (skip > 0) dest = (char *)h + h->linp[skip - 1]; else dest = (char *)l + l->linp[NEXTINDEX(l) - 1]; ((RINTERNAL *)dest)->nrecs = rec_total(lchild); ((RINTERNAL *)dest)->pgno = lchild->pgno; /* Update the right page count. */ h->linp[skip] = h->upper -= nbytes; dest = (char *)h + h->linp[skip]; ((RINTERNAL *)dest)->nrecs = rec_total(rchild); ((RINTERNAL *)dest)->pgno = rchild->pgno; break; case P_RLEAF: /* * Update the left page count. If split * added at index 0, fix the correct page. */ if (skip > 0) dest = (char *)h + h->linp[skip - 1]; else dest = (char *)l + l->linp[NEXTINDEX(l) - 1]; ((RINTERNAL *)dest)->nrecs = NEXTINDEX(lchild); ((RINTERNAL *)dest)->pgno = lchild->pgno; /* Update the right page count. */ h->linp[skip] = h->upper -= nbytes; dest = (char *)h + h->linp[skip]; ((RINTERNAL *)dest)->nrecs = NEXTINDEX(rchild); ((RINTERNAL *)dest)->pgno = rchild->pgno; break; default: abort(); } /* Unpin the held pages. */ if (!parentsplit) { mpool_put(t->bt_mp, h, MPOOL_DIRTY); break; } /* If the root page was split, make it look right. */ if (sp->pgno == P_ROOT && (F_ISSET(t, R_RECNO) ? bt_rroot(t, sp, l, r) : bt_broot(t, sp, l, r)) == RET_ERROR) goto err1; mpool_put(t->bt_mp, lchild, MPOOL_DIRTY); mpool_put(t->bt_mp, rchild, MPOOL_DIRTY); } /* Unpin the held pages. */ mpool_put(t->bt_mp, l, MPOOL_DIRTY); mpool_put(t->bt_mp, r, MPOOL_DIRTY); /* Clear any pages left on the stack. */ return (RET_SUCCESS); /* * If something fails in the above loop we were already walking back * up the tree and the tree is now inconsistent. Nothing much we can * do about it but release any memory we're holding. */ err1: mpool_put(t->bt_mp, lchild, MPOOL_DIRTY); mpool_put(t->bt_mp, rchild, MPOOL_DIRTY); err2: mpool_put(t->bt_mp, l, 0); mpool_put(t->bt_mp, r, 0); __dbpanic(t->bt_dbp); return (RET_ERROR); } /* * BT_PAGE -- Split a non-root page of a btree. * * Parameters: * t: tree * h: root page * lp: pointer to left page pointer * rp: pointer to right page pointer * skip: pointer to index to leave open * ilen: insert length * * Returns: * Pointer to page in which to insert or NULL on error. */ static PAGE * bt_page(t, h, lp, rp, skip, ilen) BTREE *t; PAGE *h, **lp, **rp; indx_t *skip; size_t ilen; { PAGE *l, *r, *tp; pgno_t npg; #ifdef STATISTICS ++bt_split; #endif /* Put the new right page for the split into place. */ if ((r = __bt_new(t, &npg)) == NULL) return (NULL); r->pgno = npg; r->lower = BTDATAOFF; r->upper = t->bt_psize; r->nextpg = h->nextpg; r->prevpg = h->pgno; r->flags = h->flags & P_TYPE; /* * If we're splitting the last page on a level because we're appending * a key to it (skip is NEXTINDEX()), it's likely that the data is * sorted. Adding an empty page on the side of the level is less work * and can push the fill factor much higher than normal. If we're * wrong it's no big deal, we'll just do the split the right way next * time. It may look like it's equally easy to do a similar hack for * reverse sorted data, that is, split the tree left, but it's not. * Don't even try. */ if (h->nextpg == P_INVALID && *skip == NEXTINDEX(h)) { #ifdef STATISTICS ++bt_sortsplit; #endif h->nextpg = r->pgno; r->lower = BTDATAOFF + sizeof(indx_t); *skip = 0; *lp = h; *rp = r; return (r); } /* Put the new left page for the split into place. */ if ((l = (PAGE *)malloc(t->bt_psize)) == NULL) { mpool_put(t->bt_mp, r, 0); return (NULL); } #ifdef PURIFY memset(l, 0xff, t->bt_psize); #endif l->pgno = h->pgno; l->nextpg = r->pgno; l->prevpg = h->prevpg; l->lower = BTDATAOFF; l->upper = t->bt_psize; l->flags = h->flags & P_TYPE; /* Fix up the previous pointer of the page after the split page. */ if (h->nextpg != P_INVALID) { if ((tp = mpool_get(t->bt_mp, h->nextpg, 0)) == NULL) { free(l); /* XXX mpool_free(t->bt_mp, r->pgno); */ return (NULL); } tp->prevpg = r->pgno; mpool_put(t->bt_mp, tp, MPOOL_DIRTY); } /* * Split right. The key/data pairs aren't sorted in the btree page so * it's simpler to copy the data from the split page onto two new pages * instead of copying half the data to the right page and compacting * the left page in place. Since the left page can't change, we have * to swap the original and the allocated left page after the split. */ tp = bt_psplit(t, h, l, r, skip, ilen); /* Move the new left page onto the old left page. */ memmove(h, l, t->bt_psize); if (tp == l) tp = h; free(l); *lp = h; *rp = r; return (tp); } /* * BT_ROOT -- Split the root page of a btree. * * Parameters: * t: tree * h: root page * lp: pointer to left page pointer * rp: pointer to right page pointer * skip: pointer to index to leave open * ilen: insert length * * Returns: * Pointer to page in which to insert or NULL on error. */ static PAGE * bt_root(t, h, lp, rp, skip, ilen) BTREE *t; PAGE *h, **lp, **rp; indx_t *skip; size_t ilen; { PAGE *l, *r, *tp; pgno_t lnpg, rnpg; #ifdef STATISTICS ++bt_split; ++bt_rootsplit; #endif /* Put the new left and right pages for the split into place. */ if ((l = __bt_new(t, &lnpg)) == NULL || (r = __bt_new(t, &rnpg)) == NULL) return (NULL); l->pgno = lnpg; r->pgno = rnpg; l->nextpg = r->pgno; r->prevpg = l->pgno; l->prevpg = r->nextpg = P_INVALID; l->lower = r->lower = BTDATAOFF; l->upper = r->upper = t->bt_psize; l->flags = r->flags = h->flags & P_TYPE; /* Split the root page. */ tp = bt_psplit(t, h, l, r, skip, ilen); *lp = l; *rp = r; return (tp); } /* * BT_RROOT -- Fix up the recno root page after it has been split. * * Parameters: * t: tree * h: root page * l: left page * r: right page * * Returns: * RET_ERROR, RET_SUCCESS */ static int bt_rroot(t, h, l, r) BTREE *t; PAGE *h, *l, *r; { char *dest; /* Insert the left and right keys, set the header information. */ h->linp[0] = h->upper = t->bt_psize - NRINTERNAL; dest = (char *)h + h->upper; WR_RINTERNAL(dest, l->flags & P_RLEAF ? NEXTINDEX(l) : rec_total(l), l->pgno); h->linp[1] = h->upper -= NRINTERNAL; dest = (char *)h + h->upper; WR_RINTERNAL(dest, r->flags & P_RLEAF ? NEXTINDEX(r) : rec_total(r), r->pgno); h->lower = BTDATAOFF + 2 * sizeof(indx_t); /* Unpin the root page, set to recno internal page. */ h->flags &= ~P_TYPE; h->flags |= P_RINTERNAL; mpool_put(t->bt_mp, h, MPOOL_DIRTY); return (RET_SUCCESS); } /* * BT_BROOT -- Fix up the btree root page after it has been split. * * Parameters: * t: tree * h: root page * l: left page * r: right page * * Returns: * RET_ERROR, RET_SUCCESS */ static int bt_broot(t, h, l, r) BTREE *t; PAGE *h, *l, *r; { BINTERNAL *bi; BLEAF *bl; u_int32_t nbytes; char *dest; /* * If the root page was a leaf page, change it into an internal page. * We copy the key we split on (but not the key's data, in the case of * a leaf page) to the new root page. * * The btree comparison code guarantees that the left-most key on any * level of the tree is never used, so it doesn't need to be filled in. */ nbytes = NBINTERNAL(0); h->linp[0] = h->upper = t->bt_psize - nbytes; dest = (char *)h + h->upper; WR_BINTERNAL(dest, 0, l->pgno, 0); switch (h->flags & P_TYPE) { case P_BLEAF: bl = GETBLEAF(r, 0); nbytes = NBINTERNAL(bl->ksize); h->linp[1] = h->upper -= nbytes; dest = (char *)h + h->upper; WR_BINTERNAL(dest, bl->ksize, r->pgno, 0); memmove(dest, bl->bytes, bl->ksize); /* * If the key is on an overflow page, mark the overflow chain * so it isn't deleted when the leaf copy of the key is deleted. */ if (bl->flags & P_BIGKEY && bt_preserve(t, *(pgno_t *)bl->bytes) == RET_ERROR) return (RET_ERROR); break; case P_BINTERNAL: bi = GETBINTERNAL(r, 0); nbytes = NBINTERNAL(bi->ksize); h->linp[1] = h->upper -= nbytes; dest = (char *)h + h->upper; memmove(dest, bi, nbytes); ((BINTERNAL *)dest)->pgno = r->pgno; break; default: abort(); } /* There are two keys on the page. */ h->lower = BTDATAOFF + 2 * sizeof(indx_t); /* Unpin the root page, set to btree internal page. */ h->flags &= ~P_TYPE; h->flags |= P_BINTERNAL; mpool_put(t->bt_mp, h, MPOOL_DIRTY); return (RET_SUCCESS); } /* * BT_PSPLIT -- Do the real work of splitting the page. * * Parameters: * t: tree * h: page to be split * l: page to put lower half of data * r: page to put upper half of data * pskip: pointer to index to leave open * ilen: insert length * * Returns: * Pointer to page in which to insert. */ static PAGE * bt_psplit(t, h, l, r, pskip, ilen) BTREE *t; PAGE *h, *l, *r; indx_t *pskip; size_t ilen; { BINTERNAL *bi; BLEAF *bl; CURSOR *c; RLEAF *rl; PAGE *rval; void *src; indx_t full, half, nxt, off, skip, top, used; u_int32_t nbytes; int bigkeycnt, isbigkey; /* * Split the data to the left and right pages. Leave the skip index * open. Additionally, make some effort not to split on an overflow * key. This makes internal page processing faster and can save * space as overflow keys used by internal pages are never deleted. */ bigkeycnt = 0; skip = *pskip; full = t->bt_psize - BTDATAOFF; half = full / 2; used = 0; for (nxt = off = 0, top = NEXTINDEX(h); nxt < top; ++off) { if (skip == off) { nbytes = ilen; isbigkey = 0; /* XXX: not really known. */ } else switch (h->flags & P_TYPE) { case P_BINTERNAL: src = bi = GETBINTERNAL(h, nxt); nbytes = NBINTERNAL(bi->ksize); isbigkey = bi->flags & P_BIGKEY; break; case P_BLEAF: src = bl = GETBLEAF(h, nxt); nbytes = NBLEAF(bl); isbigkey = bl->flags & P_BIGKEY; break; case P_RINTERNAL: src = GETRINTERNAL(h, nxt); nbytes = NRINTERNAL; isbigkey = 0; break; case P_RLEAF: src = rl = GETRLEAF(h, nxt); nbytes = NRLEAF(rl); isbigkey = 0; break; default: abort(); } /* * If the key/data pairs are substantial fractions of the max * possible size for the page, it's possible to get situations * where we decide to try and copy too much onto the left page. * Make sure that doesn't happen. */ if (skip <= off && used + nbytes >= full || nxt == top - 1) { --off; break; } /* Copy the key/data pair, if not the skipped index. */ if (skip != off) { ++nxt; l->linp[off] = l->upper -= nbytes; memmove((char *)l + l->upper, src, nbytes); } used += nbytes; if (used >= half) { if (!isbigkey || bigkeycnt == 3) break; else ++bigkeycnt; } } /* * Off is the last offset that's valid for the left page. * Nxt is the first offset to be placed on the right page. */ l->lower += (off + 1) * sizeof(indx_t); /* * If splitting the page that the cursor was on, the cursor has to be * adjusted to point to the same record as before the split. If the * cursor is at or past the skipped slot, the cursor is incremented by * one. If the cursor is on the right page, it is decremented by the * number of records split to the left page. */ c = &t->bt_cursor; if (F_ISSET(c, CURS_INIT) && c->pg.pgno == h->pgno) { if (c->pg.index >= skip) ++c->pg.index; if (c->pg.index < nxt) /* Left page. */ c->pg.pgno = l->pgno; else { /* Right page. */ c->pg.pgno = r->pgno; c->pg.index -= nxt; } } /* * If the skipped index was on the left page, just return that page. * Otherwise, adjust the skip index to reflect the new position on * the right page. */ if (skip <= off) { skip = 0; rval = l; } else { rval = r; *pskip -= nxt; } for (off = 0; nxt < top; ++off) { if (skip == nxt) { ++off; skip = 0; } switch (h->flags & P_TYPE) { case P_BINTERNAL: src = bi = GETBINTERNAL(h, nxt); nbytes = NBINTERNAL(bi->ksize); break; case P_BLEAF: src = bl = GETBLEAF(h, nxt); nbytes = NBLEAF(bl); break; case P_RINTERNAL: src = GETRINTERNAL(h, nxt); nbytes = NRINTERNAL; break; case P_RLEAF: src = rl = GETRLEAF(h, nxt); nbytes = NRLEAF(rl); break; default: abort(); } ++nxt; r->linp[off] = r->upper -= nbytes; memmove((char *)r + r->upper, src, nbytes); } r->lower += off * sizeof(indx_t); /* If the key is being appended to the page, adjust the index. */ if (skip == top) r->lower += sizeof(indx_t); return (rval); } /* * BT_PRESERVE -- Mark a chain of pages as used by an internal node. * * Chains of indirect blocks pointed to by leaf nodes get reclaimed when the * record that references them gets deleted. Chains pointed to by internal * pages never get deleted. This routine marks a chain as pointed to by an * internal page. * * Parameters: * t: tree * pg: page number of first page in the chain. * * Returns: * RET_SUCCESS, RET_ERROR. */ static int bt_preserve(t, pg) BTREE *t; pgno_t pg; { PAGE *h; if ((h = mpool_get(t->bt_mp, pg, 0)) == NULL) return (RET_ERROR); h->flags |= P_PRESERVE; mpool_put(t->bt_mp, h, MPOOL_DIRTY); return (RET_SUCCESS); } /* * REC_TOTAL -- Return the number of recno entries below a page. * * Parameters: * h: page * * Returns: * The number of recno entries below a page. * * XXX * These values could be set by the bt_psplit routine. The problem is that the * entry has to be popped off of the stack etc. or the values have to be passed * all the way back to bt_split/bt_rroot and it's not very clean. */ static recno_t rec_total(h) PAGE *h; { recno_t recs; indx_t nxt, top; for (recs = 0, nxt = 0, top = NEXTINDEX(h); nxt < top; ++nxt) recs += GETRINTERNAL(h, nxt)->nrecs; return (recs); } vigor-0.016.orig/db/btree/bt_utils.c0100644000076400007640000001523707103707223015756 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_utils.c 8.8 (Berkeley) 7/20/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include "btree.h" /* * __bt_ret -- * Build return key/data pair. * * Parameters: * t: tree * e: key/data pair to be returned * key: user's key structure (NULL if not to be filled in) * rkey: memory area to hold key * data: user's data structure (NULL if not to be filled in) * rdata: memory area to hold data * copy: always copy the key/data item * * Returns: * RET_SUCCESS, RET_ERROR. */ int __bt_ret(t, e, key, rkey, data, rdata, copy) BTREE *t; EPG *e; DBT *key, *rkey, *data, *rdata; int copy; { BLEAF *bl; void *p; bl = GETBLEAF(e->page, e->index); /* * We must copy big keys/data to make them contigous. Otherwise, * leave the page pinned and don't copy unless the user specified * concurrent access. */ if (key == NULL) goto dataonly; if (bl->flags & P_BIGKEY) { if (__ovfl_get(t, bl->bytes, &key->size, &rkey->data, &rkey->size)) return (RET_ERROR); key->data = rkey->data; } else if (copy || F_ISSET(t, B_DB_LOCK)) { if (bl->ksize > rkey->size) { p = (void *)(rkey->data == NULL ? malloc(bl->ksize) : realloc(rkey->data, bl->ksize)); if (p == NULL) return (RET_ERROR); rkey->data = p; rkey->size = bl->ksize; } memmove(rkey->data, bl->bytes, bl->ksize); key->size = bl->ksize; key->data = rkey->data; } else { key->size = bl->ksize; key->data = bl->bytes; } dataonly: if (data == NULL) return (RET_SUCCESS); if (bl->flags & P_BIGDATA) { if (__ovfl_get(t, bl->bytes + bl->ksize, &data->size, &rdata->data, &rdata->size)) return (RET_ERROR); data->data = rdata->data; } else if (copy || F_ISSET(t, B_DB_LOCK)) { /* Use +1 in case the first record retrieved is 0 length. */ if (bl->dsize + 1 > rdata->size) { p = (void *)(rdata->data == NULL ? malloc(bl->dsize + 1) : realloc(rdata->data, bl->dsize + 1)); if (p == NULL) return (RET_ERROR); rdata->data = p; rdata->size = bl->dsize + 1; } memmove(rdata->data, bl->bytes + bl->ksize, bl->dsize); data->size = bl->dsize; data->data = rdata->data; } else { data->size = bl->dsize; data->data = bl->bytes + bl->ksize; } return (RET_SUCCESS); } /* * __BT_CMP -- Compare a key to a given record. * * Parameters: * t: tree * k1: DBT pointer of first arg to comparison * e: pointer to EPG for comparison * * Returns: * < 0 if k1 is < record * = 0 if k1 is = record * > 0 if k1 is > record */ int __bt_cmp(t, k1, e) BTREE *t; const DBT *k1; EPG *e; { BINTERNAL *bi; BLEAF *bl; DBT k2; PAGE *h; void *bigkey; /* * The left-most key on internal pages, at any level of the tree, is * guaranteed by the following code to be less than any user key. * This saves us from having to update the leftmost key on an internal * page when the user inserts a new key in the tree smaller than * anything we've yet seen. */ h = e->page; if (e->index == 0 && h->prevpg == P_INVALID && !(h->flags & P_BLEAF)) return (1); bigkey = NULL; if (h->flags & P_BLEAF) { bl = GETBLEAF(h, e->index); if (bl->flags & P_BIGKEY) bigkey = bl->bytes; else { k2.data = bl->bytes; k2.size = bl->ksize; } } else { bi = GETBINTERNAL(h, e->index); if (bi->flags & P_BIGKEY) bigkey = bi->bytes; else { k2.data = bi->bytes; k2.size = bi->ksize; } } if (bigkey) { if (__ovfl_get(t, bigkey, &k2.size, &t->bt_rdata.data, &t->bt_rdata.size)) return (RET_ERROR); k2.data = t->bt_rdata.data; } return ((*t->bt_cmp)(k1, &k2)); } /* * __BT_DEFCMP -- Default comparison routine. * * Parameters: * a: DBT #1 * b: DBT #2 * * Returns: * < 0 if a is < b * = 0 if a is = b * > 0 if a is > b */ int __bt_defcmp(a, b) const DBT *a, *b; { register size_t len; register u_char *p1, *p2; /* * XXX * If a size_t doesn't fit in an int, this routine can lose. * What we need is a integral type which is guaranteed to be * larger than a size_t, and there is no such thing. */ len = MIN(a->size, b->size); for (p1 = a->data, p2 = b->data; len--; ++p1, ++p2) if (*p1 != *p2) return ((int)*p1 - (int)*p2); return ((int)a->size - (int)b->size); } /* * __BT_DEFPFX -- Default prefix routine. * * Parameters: * a: DBT #1 * b: DBT #2 * * Returns: * Number of bytes needed to distinguish b from a. */ size_t __bt_defpfx(a, b) const DBT *a, *b; { register u_char *p1, *p2; register size_t cnt, len; cnt = 1; len = MIN(a->size, b->size); for (p1 = a->data, p2 = b->data; len--; ++p1, ++p2, ++cnt) if (*p1 != *p2) return (cnt); /* a->size must be <= b->size, or they wouldn't be in this order. */ return (a->size < b->size ? a->size + 1 : a->size); } vigor-0.016.orig/db/btree/bt_close.c0100644000076400007640000001064707103707223015723 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Olson. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)bt_close.c 8.7 (Berkeley) 8/17/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include #include "btree.h" static int bt_meta __P((BTREE *)); /* * BT_CLOSE -- Close a btree. * * Parameters: * dbp: pointer to access method * * Returns: * RET_ERROR, RET_SUCCESS */ int __bt_close(dbp) DB *dbp; { BTREE *t; int fd; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* Sync the tree. */ if (__bt_sync(dbp, 0) == RET_ERROR) return (RET_ERROR); /* Close the memory pool. */ if (mpool_close(t->bt_mp) == RET_ERROR) return (RET_ERROR); /* Free random memory. */ if (t->bt_cursor.key.data != NULL) { free(t->bt_cursor.key.data); t->bt_cursor.key.size = 0; t->bt_cursor.key.data = NULL; } if (t->bt_rkey.data) { free(t->bt_rkey.data); t->bt_rkey.size = 0; t->bt_rkey.data = NULL; } if (t->bt_rdata.data) { free(t->bt_rdata.data); t->bt_rdata.size = 0; t->bt_rdata.data = NULL; } fd = t->bt_fd; free(t); free(dbp); return (close(fd) ? RET_ERROR : RET_SUCCESS); } /* * BT_SYNC -- sync the btree to disk. * * Parameters: * dbp: pointer to access method * * Returns: * RET_SUCCESS, RET_ERROR. */ int __bt_sync(dbp, flags) const DB *dbp; u_int flags; { BTREE *t; int status; t = dbp->internal; /* Toss any page pinned across calls. */ if (t->bt_pinned != NULL) { mpool_put(t->bt_mp, t->bt_pinned, 0); t->bt_pinned = NULL; } /* Sync doesn't currently take any flags. */ if (flags != 0) { errno = EINVAL; return (RET_ERROR); } if (F_ISSET(t, B_INMEM | B_RDONLY) || !F_ISSET(t, B_MODIFIED)) return (RET_SUCCESS); if (F_ISSET(t, B_METADIRTY) && bt_meta(t) == RET_ERROR) return (RET_ERROR); if ((status = mpool_sync(t->bt_mp)) == RET_SUCCESS) F_CLR(t, B_MODIFIED); return (status); } /* * BT_META -- write the tree meta data to disk. * * Parameters: * t: tree * * Returns: * RET_ERROR, RET_SUCCESS */ static int bt_meta(t) BTREE *t; { BTMETA m; void *p; if ((p = mpool_get(t->bt_mp, P_META, 0)) == NULL) return (RET_ERROR); /* Fill in metadata. */ m.magic = BTREEMAGIC; m.version = BTREEVERSION; m.psize = t->bt_psize; m.free = t->bt_free; m.nrecs = t->bt_nrecs; m.flags = F_ISSET(t, SAVEMETA); memmove(p, &m, sizeof(BTMETA)); mpool_put(t->bt_mp, p, MPOOL_DIRTY); return (RET_SUCCESS); } vigor-0.016.orig/db/db/0040755000076400007640000000000007103707223013244 5ustar cjw44cjw44vigor-0.016.orig/db/db/db.c0100644000076400007640000000612007103707223013771 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)db.c 8.4 (Berkeley) 2/21/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include DB * dbopen(fname, flags, mode, type, openinfo) const char *fname; int flags, mode; DBTYPE type; const void *openinfo; { #define DB_FLAGS (DB_LOCK | DB_SHMEM | DB_TXN) #define USE_OPEN_FLAGS \ (O_CREAT | O_EXCL | O_EXLOCK | O_NONBLOCK | O_RDONLY | \ O_RDWR | O_SHLOCK | O_TRUNC) if ((flags & ~(USE_OPEN_FLAGS | DB_FLAGS)) == 0) switch (type) { case DB_BTREE: return (__bt_open(fname, flags & USE_OPEN_FLAGS, mode, openinfo, flags & DB_FLAGS)); case DB_HASH: abort(); case DB_RECNO: return (__rec_open(fname, flags & USE_OPEN_FLAGS, mode, openinfo, flags & DB_FLAGS)); } errno = EINVAL; return (NULL); } static int __dberr() { return (RET_ERROR); } /* * __DBPANIC -- Stop. * * Parameters: * dbp: pointer to the DB structure. */ void __dbpanic(dbp) DB *dbp; { /* The only thing that can succeed is a close. */ dbp->del = (int (*)())__dberr; dbp->fd = (int (*)())__dberr; dbp->get = (int (*)())__dberr; dbp->put = (int (*)())__dberr; dbp->seq = (int (*)())__dberr; dbp->sync = (int (*)())__dberr; } vigor-0.016.orig/db/README0100644000076400007640000000011107103707223013525 0ustar cjw44cjw44This is a stripped-down version of version 1.85 of the Berkeley DB code. vigor-0.016.orig/vigor/0040755000076400007640000000000007103707466013431 5ustar cjw44cjw44vigor-0.016.orig/vigor/old_anims/0040755000076400007640000000000007103707500015363 5ustar cjw44cjw44vigor-0.016.orig/vigor/old_anims/vigor_ent2.xbm0100644000076400007640000003116707103707224020161 0ustar cjw44cjw44/* vigor entrance 2 */ #define vigor_ent2_width 128 #define vigor_ent2_height 128 static char vigor_ent2_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa0, 0xfa, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x0f, 0xf0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xe0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0xf0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0xe0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0xc0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x80, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x80, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x01, 0x00, 0x80, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0x00, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0x00, 0x00, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0xc0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x80, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0xfc, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x1f, 0x54, 0x82, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x78, 0xff, 0x01, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x0f, 0xf8, 0x7f, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0xf0, 0x7f, 0x1c, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0xf0, 0x7f, 0x1c, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc7, 0xf1, 0x7f, 0x1c, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xe3, 0xf8, 0x3f, 0x80, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xe3, 0xf8, 0x7f, 0xc0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x07, 0xfc, 0xfd, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0xfe, 0xf0, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x1f, 0x7f, 0xf0, 0xef, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xf0, 0xf7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x87, 0x3f, 0xf0, 0xef, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xf0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xcf, 0x3f, 0xf0, 0xf7, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xe7, 0x1f, 0xf0, 0xf7, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc3, 0x1f, 0xf8, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xe7, 0x1f, 0xf8, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xe7, 0x0f, 0xf0, 0xf7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x1f, 0xf8, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xf1, 0x0f, 0xfc, 0xf9, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xe3, 0x0f, 0xf8, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xf1, 0x07, 0xfc, 0xf3, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xf3, 0x0f, 0xfc, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xf1, 0x07, 0xfc, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xf9, 0x07, 0xfe, 0xf9, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xf8, 0x0f, 0xfc, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xf1, 0x0f, 0xfe, 0xfd, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xf0, 0x07, 0xfe, 0xf9, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xf8, 0x07, 0xfe, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xf0, 0x07, 0x7f, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xf8, 0x07, 0xff, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xf0, 0x03, 0x7e, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xfc, 0x83, 0x7f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xf8, 0x01, 0x7f, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x83, 0x7f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0xfc, 0x83, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xf8, 0x03, 0x7f, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0xfe, 0xc0, 0x9f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0xfc, 0xc1, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0xfe, 0x81, 0x3f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0xfe, 0xc1, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x0f, 0x7e, 0xc0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0xff, 0xc0, 0x8f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xc0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x80, 0xc2, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xf0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xd7, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x6e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; vigor-0.016.orig/vigor/old_anims/vigor_empty.xbm0100644000076400007640000003116607103707224020446 0ustar cjw44cjw44/* vigor absent */ #define vigor_empty_width 128 #define vigor_empty_height 128 static char vigor_empty_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; vigor-0.016.orig/vigor/old_anims/vigor_wav1.xbm0100644000076400007640000003117507103707224020166 0ustar cjw44cjw44/* Vigor beginning a wave */ #define vigor_wav1_width 128 #define vigor_wav1_height 128 static char vigor_wav1_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xd6, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x90, 0xf2, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf4, 0xf6, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x6d, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x3f, 0x00, 0xfe, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x7f, 0x00, 0x00, 0xfc, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x3f, 0x00, 0x00, 0xfc, 0x5f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x1f, 0x00, 0x00, 0xfc, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x3f, 0x00, 0x00, 0xf8, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0xf0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0xe0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0xc0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0xe0, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0xc0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x80, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x03, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0xc0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0xc0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x80, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x01, 0x00, 0x00, 0x80, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x80, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x57, 0x01, 0x00, 0x94, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x01, 0x00, 0x7c, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x07, 0x6f, 0x02, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0xdf, 0xff, 0x01, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x01, 0xfe, 0xff, 0x00, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0xfc, 0x7f, 0x68, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0x00, 0xfc, 0xff, 0x78, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x10, 0xfc, 0x7f, 0x38, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0x78, 0xfc, 0x7f, 0x70, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x78, 0xfc, 0xff, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x78, 0xfc, 0xff, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x01, 0xfe, 0xfd, 0x01, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0xff, 0xe0, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x83, 0x7f, 0xe0, 0xbf, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x87, 0xff, 0xc0, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x7f, 0xe0, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x83, 0xff, 0xc0, 0x7f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0xff, 0xc0, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x7f, 0xc0, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xe7, 0x3f, 0x80, 0x7f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x83, 0x7f, 0xc0, 0xbf, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xe7, 0x7f, 0xe0, 0x9f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x3f, 0x80, 0x7f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x3f, 0xc0, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x7f, 0xc0, 0x3f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x3f, 0xa0, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x3f, 0xc0, 0x7f, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xe7, 0x3f, 0xe0, 0xbf, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfa, 0x87, 0x7f, 0xc0, 0x3f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xc7, 0x3f, 0xc0, 0x3f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xff, 0xe7, 0x7f, 0xc0, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xc7, 0xff, 0xc0, 0x9f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x83, 0x7f, 0xe0, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xc1, 0x7f, 0xc0, 0x3f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x81, 0xff, 0xc0, 0xbf, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x80, 0x7f, 0xe0, 0x9f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x80, 0x7f, 0xe0, 0x1f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0x80, 0x7f, 0xc0, 0x9f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x3f, 0x00, 0x7f, 0xe0, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x17, 0x80, 0x7f, 0xc0, 0x3f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x03, 0x80, 0x7f, 0xe0, 0xaf, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x01, 0xc0, 0x7f, 0xe0, 0x9f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x5f, 0x00, 0x00, 0x7f, 0xe0, 0x9f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x0b, 0x00, 0x80, 0x7f, 0xe0, 0xdf, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x00, 0x00, 0x80, 0x7f, 0xc0, 0x1f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x7f, 0xf0, 0xdf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xc0, 0xcf, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xe0, 0x8f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0xc0, 0xcf, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x7f, 0x40, 0xc2, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xe0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x7f, 0x00, 0xc0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xc0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xf0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0xf8, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xbf, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x64, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; vigor-0.016.orig/vigor/old_anims/vigor_rest.xbm0100644000076400007640000003116307103707224020262 0ustar cjw44cjw44/* vigor absent */ #define vigor_rest_width 128 #define vigor_rest_height 128 static char vigor_rest_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa0, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa0, 0xfa, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0x1f, 0xe0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xc0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xc0, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0x80, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x1f, 0x00, 0x00, 0xfe, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x00, 0x00, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x00, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x01, 0x80, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x83, 0x4a, 0xf0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0xef, 0x3f, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x03, 0xfe, 0x1f, 0xc0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x01, 0xfc, 0x1f, 0xc7, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x01, 0xfc, 0x1f, 0xc7, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x71, 0xfc, 0x1f, 0xc7, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x71, 0xfc, 0x1f, 0xc0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x71, 0xfc, 0x3f, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x03, 0xfe, 0x7e, 0xf0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x07, 0x7f, 0xf8, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x8f, 0x3f, 0xf8, 0xf7, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xf0, 0xf7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x87, 0x3f, 0xf0, 0xef, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xf0, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xcf, 0x3f, 0xf0, 0xf7, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xcf, 0x3f, 0xe0, 0xef, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x87, 0x3f, 0xf0, 0xf7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xcf, 0x3f, 0xf0, 0xf7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xcf, 0x1f, 0xe0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x3f, 0xf0, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xc7, 0x3f, 0xf0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x3f, 0xe0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xc7, 0x1f, 0xf0, 0xcf, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xcf, 0x3f, 0xf0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x8f, 0x3f, 0xe0, 0xe7, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xcf, 0x3f, 0xf0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xc7, 0x7f, 0xe0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x8f, 0x7f, 0xf0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x87, 0x3f, 0xf0, 0xcf, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xe0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x7f, 0xf0, 0xe7, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xf0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x3f, 0xe0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xf0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x3f, 0xe0, 0xcf, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x8f, 0x7f, 0xf0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x87, 0x7f, 0xf0, 0xe7, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x7f, 0xe0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x3f, 0xf0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x7f, 0xf0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x87, 0x7f, 0xe0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x87, 0x7f, 0xf0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x3f, 0xe0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x7f, 0xe0, 0xc7, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0xe0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x40, 0xe1, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xf0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xbf, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xec, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; vigor-0.016.orig/vigor/old_anims/vigor_ent_0004.xbm0100644000076400007640000003120107103707224020527 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0004_width 128 #define vigor_ent_0004_height 128 static char vigor_ent_0004_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x2a, 0xff, 0x57, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0xf8, 0xff, 0x7f, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0xff, 0xff, 0xff, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x90, 0xff, 0xf7, 0xff, 0x93, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0xc5, 0x3f, 0x11, 0xfd, 0x0f, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0xf0, 0xaf, 0x22, 0xf4, 0x4f, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0xfa, 0x01, 0x88, 0xd2, 0x1f, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0xfc, 0x55, 0x11, 0x00, 0x7f, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x7f, 0x00, 0x44, 0xa5, 0x3e, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x9f, 0xaa, 0x08, 0x04, 0xfc, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x1f, 0x00, 0x21, 0x51, 0xf9, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0xe9, 0x5f, 0x55, 0x24, 0x02, 0xf8, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0xc4, 0x07, 0x02, 0x81, 0x48, 0xe1, 0x23, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0xd4, 0xab, 0x28, 0x15, 0x08, 0xe4, 0x45, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0xe2, 0x43, 0x42, 0xa0, 0xa2, 0xf0, 0x03, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0xe8, 0x4b, 0x14, 0x05, 0x04, 0xc2, 0x2b, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0xfa, 0x89, 0x42, 0xa8, 0x50, 0xd4, 0x07, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0xf9, 0x29, 0x94, 0x02, 0x82, 0x80, 0x4f, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0xf2, 0x42, 0x41, 0xa8, 0x14, 0xd2, 0x07, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0xfa, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x5f, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x7c, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x0f, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x79, 0x8a, 0x42, 0xa1, 0x40, 0x51, 0x5f, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0xfc, 0x11, 0x14, 0x0a, 0x0e, 0x04, 0x1e, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0xf9, 0x52, 0xa1, 0xe0, 0xff, 0x91, 0x5e, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0xfa, 0x24, 0x0a, 0xfd, 0xff, 0x47, 0x3e, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0xfa, 0xa4, 0x50, 0xff, 0xff, 0x0f, 0x7e, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0xf4, 0x09, 0x85, 0xff, 0xff, 0x2f, 0x7c, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x79, 0x52, 0xd4, 0x1f, 0xc0, 0x5f, 0x7d, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0xf5, 0x89, 0xe2, 0x57, 0x95, 0xff, 0xff, 0x7c, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0xf9, 0x29, 0xfa, 0x87, 0x10, 0xfd, 0xff, 0xc5, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xf2, 0x45, 0xf1, 0x15, 0x45, 0x3c, 0xe0, 0x16, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0xea, 0x29, 0xf4, 0x51, 0x10, 0x1f, 0x80, 0x27, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0xf4, 0x93, 0xfe, 0x84, 0x4a, 0x1e, 0x00, 0x83, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0xd1, 0x53, 0x7e, 0x29, 0x88, 0x07, 0x04, 0x17, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0xea, 0x83, 0x3c, 0x42, 0x51, 0x87, 0x1f, 0x02, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0xc4, 0xaf, 0xbc, 0x14, 0x85, 0xc3, 0x1f, 0xaa, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x07, 0x3d, 0x49, 0xa8, 0xc7, 0x1f, 0x04, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0xaa, 0x5f, 0xfe, 0x93, 0xc2, 0xc3, 0x3f, 0x56, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x2f, 0xff, 0x4f, 0x94, 0x83, 0x3f, 0x0e, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x4f, 0xbf, 0x3f, 0xfd, 0x87, 0x1f, 0x2e, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x3f, 0x0f, 0x70, 0xee, 0x07, 0x07, 0x8e, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0xdf, 0x07, 0xe0, 0x56, 0x0f, 0x00, 0x3f, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0xfe, 0x01, 0xc0, 0x8b, 0x1e, 0x80, 0x9f, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0xfc, 0x01, 0x80, 0x23, 0x5e, 0xc0, 0x3f, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xfd, 0x80, 0x03, 0x95, 0xfa, 0x72, 0x7c, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xfa, 0xe0, 0x07, 0x21, 0xf2, 0x3f, 0x7d, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0xfa, 0xe0, 0x07, 0x96, 0xc8, 0xbf, 0x78, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0xfc, 0xf0, 0x0f, 0x23, 0x49, 0x7c, 0x7c, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0xf9, 0xf0, 0x0f, 0x97, 0x84, 0x7a, 0xf9, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x77, 0xe0, 0x07, 0x23, 0x29, 0xfa, 0xf5, 0x41, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0xc9, 0xfe, 0xe0, 0x07, 0x8b, 0x44, 0xf4, 0xf8, 0x0b, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0xf1, 0x80, 0x01, 0x29, 0x91, 0xf4, 0xf1, 0xa1, 0x52, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0xca, 0xca, 0x01, 0x80, 0x45, 0x4a, 0xf2, 0xe3, 0x0b, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0xca, 0x03, 0xc0, 0x94, 0x48, 0xe4, 0xeb, 0xa3, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0xd4, 0x07, 0x40, 0x21, 0x91, 0xe8, 0xd3, 0x0b, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0xd1, 0x0f, 0x70, 0x4a, 0x92, 0xc2, 0xe3, 0x4f, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0x95, 0xff, 0x3f, 0x29, 0x49, 0xd4, 0xc7, 0x27, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0x52, 0xff, 0x5f, 0x42, 0x12, 0x89, 0x97, 0x8f, 0x8a, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xa5, 0x2f, 0x9f, 0x94, 0xa4, 0xa4, 0xa7, 0x2f, 0x20, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x8a, 0xbf, 0x5e, 0x25, 0x89, 0xa4, 0x0f, 0x2f, 0x45, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x54, 0xbe, 0x3e, 0x94, 0x24, 0x92, 0x5f, 0x9f, 0x10, 0x89, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0x3e, 0xbe, 0x22, 0x49, 0x22, 0x1f, 0x1f, 0x22, 0x01, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0x7d, 0xfd, 0x94, 0x24, 0x49, 0xbe, 0x7e, 0x09, 0x94, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0x7c, 0xfd, 0x24, 0x49, 0x92, 0x3e, 0x3e, 0x40, 0x11, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0x7d, 0xf9, 0x52, 0x92, 0x44, 0x7e, 0x7d, 0x15, 0x44, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0x79, 0xfa, 0x8a, 0x92, 0x94, 0x3c, 0x7a, 0xa0, 0x08, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xfa, 0xf2, 0x51, 0x24, 0x21, 0xfd, 0x7c, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xfa, 0xfa, 0x4b, 0x49, 0x4a, 0xfa, 0xf8, 0x28, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0xf4, 0xf4, 0x93, 0x92, 0x24, 0x79, 0xf5, 0x45, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0xf2, 0xe5, 0x57, 0x24, 0x49, 0xf2, 0xf4, 0x09, 0x51, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xf5, 0xe9, 0x93, 0x4a, 0x92, 0xf4, 0xe2, 0x53, 0x04, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xe4, 0xcb, 0x57, 0x92, 0x24, 0xf9, 0xe9, 0x83, 0x50, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0xd5, 0xd3, 0x27, 0x29, 0x49, 0xf2, 0xe3, 0x17, 0x05, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xd4, 0xaf, 0x4f, 0x4a, 0x92, 0xe4, 0xd7, 0x53, 0x50, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xa5, 0xd7, 0xaf, 0x50, 0x49, 0xd2, 0xc9, 0x83, 0x0a, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xca, 0x47, 0x2f, 0x4b, 0x92, 0xa4, 0xc9, 0x2b, 0x40, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0x94, 0x9f, 0x5f, 0x24, 0x25, 0x49, 0xe3, 0x43, 0x15, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x55, 0x2f, 0x5f, 0x49, 0x49, 0x92, 0xc8, 0x17, 0x44, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0x52, 0x5f, 0xbe, 0x12, 0x92, 0x24, 0xe5, 0x4b, 0x11, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xbf, 0x3e, 0xaa, 0x2a, 0x49, 0xc4, 0x23, 0x52, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x52, 0x5e, 0x7d, 0x29, 0xa2, 0x24, 0xe9, 0x4f, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0xbc, 0xfe, 0xa2, 0x24, 0x49, 0xc2, 0x13, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x3e, 0x79, 0x2a, 0x95, 0x92, 0xd4, 0x4b, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x7e, 0xfd, 0x4a, 0x51, 0xa4, 0xe4, 0x13, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x7c, 0xfa, 0x94, 0x8a, 0x0a, 0xe9, 0x4b, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0xfa, 0xf5, 0x25, 0x29, 0x51, 0xf2, 0x91, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xf9, 0xf4, 0xa9, 0xa4, 0x94, 0xf4, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0xfa, 0xe9, 0x25, 0x29, 0x25, 0xf9, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0xf2, 0xe5, 0x4b, 0x45, 0x52, 0xfe, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xe5, 0xea, 0x2f, 0xa9, 0x94, 0x7e, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0xd2, 0x4f, 0x4a, 0x21, 0xbf, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xa5, 0x7f, 0x49, 0xaa, 0x9f, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0xbe, 0x92, 0xf2, 0x2f, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xa5, 0xfe, 0xd7, 0xfe, 0x23, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x54, 0xfe, 0xff, 0xff, 0x95, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0xfa, 0xff, 0xff, 0x92, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0xd2, 0xff, 0x3f, 0x29, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x2a, 0xff, 0x4d, 0x22, 0x49, 0x52 }; vigor-0.016.orig/vigor/old_anims/vigor_ent1.xbm0100644000076400007640000003116707103707224020160 0ustar cjw44cjw44/* Vigor entrance 1 */ #define vigor_ent1_width 128 #define vigor_ent1_height 128 static char vigor_ent1_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x54, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xaa, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x00, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0xfe, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0xfe, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x7f, 0x00, 0x00, 0xf8, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x1f, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0xf0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x0f, 0x00, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x00, 0x00, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x00, 0xc0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x41, 0x25, 0xf8, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x83, 0xf7, 0x1f, 0xf0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x80, 0xff, 0x07, 0xf0, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0x00, 0xff, 0xc7, 0xf1, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0xff, 0xc7, 0xf1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0x1c, 0xff, 0xc7, 0xf1, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x8e, 0xff, 0x03, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x8e, 0xff, 0x07, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc0, 0xdf, 0x0f, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xe0, 0x0f, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xf1, 0x07, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xf8, 0x07, 0x7f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xf8, 0x03, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xf8, 0x07, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xfc, 0x03, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfe, 0x01, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0xfc, 0x81, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfe, 0x81, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xfe, 0x00, 0x7f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xfc, 0x81, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0xff, 0xc0, 0x9f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0xfe, 0x80, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1f, 0x7f, 0xc0, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0xff, 0xc0, 0xbf, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x1f, 0x7f, 0xc0, 0xcf, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x9f, 0x7f, 0xe0, 0x9f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x8f, 0xff, 0xc0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x1f, 0xff, 0xe0, 0xdf, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x7f, 0xe0, 0x9f, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xe0, 0xef, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0f, 0x7f, 0xf0, 0xe7, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x8f, 0x7f, 0xf0, 0xcf, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0x3f, 0xe0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc7, 0x3f, 0xf8, 0xf7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x87, 0x1f, 0xf0, 0xe7, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xc7, 0x3f, 0xf8, 0xf7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc3, 0x3f, 0xf8, 0xf3, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x87, 0x3f, 0xf0, 0xe7, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xe3, 0x0f, 0xfc, 0xf9, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xc3, 0x1f, 0xfc, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xe1, 0x1f, 0xf8, 0xf3, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xe1, 0x1f, 0xfc, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xe0, 0x07, 0xfc, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xf0, 0x0f, 0xfc, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x07, 0xfc, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x28, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x07, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x03, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x07, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x80, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x01, 0x80, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x03, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x07, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x7f, 0xfd, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xec, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; vigor-0.016.orig/vigor/old_anims/vigor_ent_0002.xbm0100644000076400007640000003120107103707224020525 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0002_width 128 #define vigor_ent_0002_height 128 static char vigor_ent_0002_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x29, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x44, 0x05, 0x02, 0x81, 0x48, 0x21, 0x22, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x94, 0xa8, 0x28, 0x15, 0x08, 0x04, 0x44, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x42, 0x42, 0x42, 0xa0, 0xa2, 0x50, 0x00, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x48, 0x4a, 0x14, 0x05, 0x04, 0x02, 0x29, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x8a, 0x88, 0x42, 0xa8, 0x50, 0x54, 0x00, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x29, 0x29, 0x94, 0x02, 0x82, 0x00, 0x4a, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x42, 0x42, 0x41, 0xa8, 0x14, 0x52, 0x00, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4a, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x52, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x24, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x08, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x49, 0x8a, 0x42, 0xa1, 0x40, 0x51, 0x41, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0x24, 0x11, 0x14, 0x0a, 0x0a, 0x04, 0x04, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0x49, 0x52, 0xa1, 0xa0, 0x50, 0x91, 0x50, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0x92, 0x24, 0x0a, 0x15, 0x05, 0x44, 0x02, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0xa4, 0x50, 0x20, 0xa0, 0x08, 0x4a, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x24, 0x09, 0x85, 0x4a, 0x15, 0x22, 0x20, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x49, 0x52, 0x94, 0x08, 0x40, 0x44, 0x05, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0x25, 0x89, 0x22, 0x52, 0x95, 0x08, 0x50, 0x08, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0x29, 0x29, 0x4a, 0x82, 0x10, 0x51, 0x05, 0x81, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xa2, 0x44, 0x91, 0x14, 0x45, 0x04, 0x50, 0x14, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0x0a, 0x29, 0x24, 0x51, 0x10, 0xa9, 0x82, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x54, 0x92, 0x92, 0x84, 0x4a, 0x00, 0x14, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x91, 0x52, 0x12, 0x29, 0x88, 0xaa, 0x40, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x2a, 0x82, 0x24, 0x42, 0x51, 0x00, 0x15, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x44, 0xaa, 0xa4, 0x14, 0x85, 0x2a, 0x20, 0xa8, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x04, 0x09, 0x49, 0x28, 0x40, 0x45, 0x01, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x2a, 0x59, 0x52, 0x92, 0x42, 0x15, 0x08, 0x55, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x22, 0x49, 0x49, 0x14, 0xa2, 0x22, 0x00, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x4a, 0x12, 0x11, 0xa1, 0x08, 0x88, 0x2a, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x29, 0x49, 0x4a, 0x0a, 0xa5, 0x22, 0x80, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0x45, 0x92, 0x90, 0x50, 0x08, 0x88, 0x2a, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0x52, 0x49, 0x4a, 0x8a, 0xa2, 0x22, 0x80, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0x14, 0x4a, 0x49, 0x22, 0x24, 0x24, 0x15, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xa9, 0x28, 0x92, 0x94, 0x92, 0x42, 0x40, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xa2, 0xa2, 0x24, 0x21, 0x22, 0x08, 0x15, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0x4a, 0x8a, 0x92, 0x94, 0xdf, 0xa5, 0x40, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0x94, 0x28, 0x92, 0xf2, 0xff, 0x0f, 0x14, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0x29, 0xa5, 0x24, 0xfe, 0xff, 0x5f, 0x21, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x45, 0x09, 0xc9, 0xff, 0xff, 0x7f, 0x45, 0xc1, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0x49, 0x2a, 0x55, 0xd2, 0xff, 0xe4, 0xff, 0x0b, 0x6a, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0x51, 0xa2, 0xe4, 0x3f, 0x91, 0xfc, 0x5f, 0xa0, 0x52, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0x8a, 0x4a, 0x49, 0xf9, 0x47, 0x4a, 0xf2, 0xff, 0x3a, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0x4a, 0x2a, 0xfa, 0x94, 0x48, 0xc4, 0xff, 0xa1, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0x94, 0x44, 0xfd, 0x21, 0x91, 0x28, 0xfe, 0x6f, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0x51, 0x29, 0x7f, 0x4a, 0x92, 0x82, 0xfa, 0x7f, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0x95, 0x4a, 0x3f, 0x29, 0x49, 0x54, 0xc4, 0xff, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0x52, 0x52, 0x4f, 0x42, 0x12, 0x89, 0xd4, 0xb7, 0x8f, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xa5, 0xe4, 0x9f, 0x94, 0xa4, 0x24, 0xf1, 0x01, 0x3e, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x8a, 0xea, 0x57, 0x25, 0x89, 0x24, 0xfa, 0x00, 0x7c, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x54, 0xe2, 0x23, 0x94, 0x24, 0x92, 0x72, 0x00, 0xf8, 0x8b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0xea, 0xab, 0x22, 0x49, 0xf2, 0x3f, 0x38, 0xf0, 0x0f, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0xe5, 0x91, 0x94, 0x24, 0xf9, 0x3f, 0xfc, 0xf0, 0xff, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0xf4, 0xa5, 0x24, 0x49, 0xfe, 0x3f, 0xfc, 0xf1, 0xff, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0xf5, 0x89, 0x52, 0x92, 0xff, 0x1d, 0xfe, 0x11, 0xfe, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0xf9, 0x2a, 0x8a, 0x92, 0x9f, 0x3c, 0xfe, 0xa1, 0xf8, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xfa, 0x52, 0x51, 0xe4, 0x2f, 0x1d, 0xfc, 0x30, 0xe1, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xfa, 0x4a, 0x4a, 0xe9, 0x4b, 0x3a, 0xfc, 0x30, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0xfc, 0x94, 0x92, 0xf2, 0x27, 0x79, 0x30, 0xf0, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0x72, 0xa5, 0x54, 0xf4, 0x49, 0x7a, 0x00, 0xf8, 0x57, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xf5, 0x28, 0x91, 0xfa, 0x92, 0xf4, 0x00, 0xfc, 0x1f, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xfc, 0x4a, 0x55, 0xfa, 0x24, 0xe9, 0x01, 0xe7, 0xff, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0xfd, 0x92, 0x22, 0x79, 0x49, 0xf2, 0xef, 0x17, 0xff, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xf4, 0x2a, 0x4a, 0x7e, 0x92, 0xa4, 0xff, 0x50, 0xfc, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xfd, 0x54, 0xa9, 0x7c, 0x49, 0xf2, 0x6d, 0x82, 0xfa, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xfa, 0x45, 0x25, 0x7b, 0x92, 0x34, 0x49, 0x2a, 0xc0, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0xfc, 0x94, 0x54, 0x3c, 0x25, 0x49, 0x22, 0x41, 0x15, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0xf5, 0x29, 0x45, 0x7d, 0x49, 0x9a, 0x48, 0x14, 0x44, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0xf2, 0x55, 0xaa, 0x3e, 0x92, 0x3c, 0x25, 0x49, 0x11, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0xea, 0xa5, 0x24, 0xbe, 0x2a, 0x59, 0x44, 0x22, 0x52, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0xf2, 0x4b, 0x49, 0x39, 0xa2, 0x3d, 0x29, 0x49, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xe5, 0x97, 0xaa, 0xfa, 0xe4, 0x7f, 0x42, 0x12, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xea, 0x2f, 0x49, 0x7a, 0xfd, 0xf5, 0x14, 0x49, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xea, 0x5f, 0x95, 0xfa, 0x3d, 0x80, 0x24, 0x11, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x5f, 0x52, 0xfc, 0x1f, 0x00, 0x4b, 0x4a, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x7f, 0x55, 0xe5, 0x0f, 0x00, 0x92, 0x90, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xff, 0xa4, 0xe8, 0x07, 0x00, 0x26, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0xfe, 0x29, 0xe5, 0x03, 0x0f, 0x48, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0xfa, 0xa7, 0xca, 0x83, 0x1f, 0x94, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xe5, 0x3f, 0xe9, 0x83, 0x3f, 0x58, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0xf5, 0x7f, 0xca, 0x83, 0x3f, 0x8c, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xca, 0xff, 0xd3, 0xc3, 0x3f, 0x98, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0xfd, 0xaf, 0x83, 0x1f, 0x28, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xf5, 0xff, 0x03, 0x1f, 0x2c, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0xd4, 0xff, 0x03, 0x04, 0xbc, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0xfe, 0x0f, 0x00, 0xfc, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0xfa, 0x0f, 0x00, 0xff, 0x4f, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0xea, 0x1f, 0x00, 0xfb, 0x5f, 0x52 }; vigor-0.016.orig/vigor/old_anims/vigor_ent_0001.xbm0100644000076400007640000003120107103707224020524 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0001_width 128 #define vigor_ent_0001_height 128 static char vigor_ent_0001_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x29, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x44, 0x05, 0x02, 0x81, 0x48, 0x21, 0x22, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x94, 0xa8, 0x28, 0x15, 0x08, 0x04, 0x44, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x42, 0x42, 0x42, 0xa0, 0xa2, 0x50, 0x00, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x48, 0x4a, 0x14, 0x05, 0x04, 0x02, 0x29, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x8a, 0x88, 0x42, 0xa8, 0x50, 0x54, 0x00, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x29, 0x29, 0x94, 0x02, 0x82, 0x00, 0x4a, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x42, 0x42, 0x41, 0xa8, 0x14, 0x52, 0x00, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4a, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x52, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x24, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x08, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x49, 0x8a, 0x42, 0xa1, 0x40, 0x51, 0x41, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0x24, 0x11, 0x14, 0x0a, 0x0a, 0x04, 0x04, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0x49, 0x52, 0xa1, 0xa0, 0x50, 0x91, 0x50, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0x92, 0x24, 0x0a, 0x15, 0x05, 0x44, 0x02, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0xa4, 0x50, 0x20, 0xa0, 0x08, 0x4a, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x24, 0x09, 0x85, 0x4a, 0x15, 0x22, 0x20, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x49, 0x52, 0x94, 0x08, 0x40, 0x44, 0x05, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0x25, 0x89, 0x22, 0x52, 0x95, 0x08, 0x50, 0x08, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0x29, 0x29, 0x4a, 0x82, 0x10, 0x51, 0x05, 0x81, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xa2, 0x44, 0x91, 0x14, 0x45, 0x04, 0x50, 0x14, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0x0a, 0x29, 0x24, 0x51, 0x10, 0xa9, 0x82, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x54, 0x92, 0x92, 0x84, 0x4a, 0x00, 0x14, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x91, 0x52, 0x12, 0x29, 0x88, 0xaa, 0x40, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x2a, 0x82, 0x24, 0x42, 0x51, 0x00, 0x15, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x44, 0xaa, 0xa4, 0x14, 0x85, 0x2a, 0x20, 0xa8, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x04, 0x09, 0x49, 0x28, 0x40, 0x45, 0x01, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x2a, 0x59, 0x52, 0x92, 0x42, 0x15, 0x08, 0x55, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x22, 0x49, 0x49, 0x14, 0xa2, 0x22, 0x00, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x4a, 0x12, 0x11, 0xa1, 0x08, 0x88, 0x2a, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x29, 0x49, 0x4a, 0x0a, 0xa5, 0x22, 0x80, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0x45, 0x92, 0x90, 0x50, 0x08, 0x88, 0x2a, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0x52, 0x49, 0x4a, 0x8a, 0xa2, 0x22, 0x80, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0x14, 0x4a, 0x49, 0x22, 0x24, 0x24, 0x15, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xa9, 0x28, 0x92, 0x94, 0x92, 0x42, 0x40, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xa2, 0xa2, 0x24, 0x21, 0x22, 0x08, 0x15, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0x4a, 0x8a, 0x92, 0x94, 0x48, 0xa5, 0x40, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0x94, 0x28, 0x92, 0x22, 0x49, 0x08, 0x14, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0x29, 0xa5, 0x24, 0x94, 0x84, 0x52, 0x21, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x45, 0x09, 0x49, 0x21, 0x29, 0x02, 0x45, 0x41, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0x49, 0x2a, 0x55, 0x92, 0x8a, 0x44, 0x54, 0x08, 0x0a, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0x51, 0xa2, 0x24, 0x28, 0x91, 0x04, 0x51, 0xa0, 0x52, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0x8a, 0x4a, 0x49, 0x49, 0x45, 0x4a, 0x52, 0x82, 0x0a, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0x4a, 0x2a, 0x92, 0x94, 0x48, 0x44, 0x2a, 0xa0, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0x94, 0x44, 0x25, 0x21, 0x91, 0x28, 0x90, 0x0a, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0x51, 0x29, 0x49, 0x4a, 0x92, 0x82, 0x22, 0x48, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0x95, 0x4a, 0x2a, 0x29, 0x49, 0x54, 0x44, 0x21, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0x52, 0x52, 0x49, 0x42, 0x12, 0x89, 0x14, 0x8a, 0x8a, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xa5, 0x24, 0x92, 0x94, 0xa4, 0x24, 0xa1, 0x20, 0x20, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x8a, 0xaa, 0x54, 0x25, 0x89, 0x24, 0x0a, 0x25, 0x45, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x54, 0xa2, 0x22, 0x94, 0x24, 0x92, 0x50, 0x90, 0x10, 0x89, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0x2a, 0xaa, 0x22, 0x49, 0x22, 0x05, 0x05, 0x22, 0x01, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0x45, 0x91, 0x94, 0x24, 0x49, 0xa8, 0x50, 0x09, 0x94, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0x54, 0xa5, 0x24, 0x49, 0x92, 0x22, 0x0a, 0x40, 0x11, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0x25, 0x89, 0x52, 0x92, 0x44, 0x44, 0x51, 0x15, 0x44, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0x49, 0x2a, 0x8a, 0x92, 0x94, 0x14, 0x42, 0xa0, 0x08, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xaa, 0x52, 0x51, 0x24, 0x21, 0xa1, 0x14, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x4a, 0x4a, 0x4a, 0x49, 0x4a, 0x8a, 0xa0, 0x2c, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x94, 0x94, 0x92, 0x92, 0x24, 0x11, 0x05, 0x45, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0x52, 0xa5, 0x54, 0x24, 0x49, 0x52, 0x54, 0x08, 0x51, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x28, 0x91, 0x4a, 0x92, 0x84, 0x82, 0x56, 0x04, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xa4, 0x4a, 0x55, 0x92, 0x24, 0x29, 0x28, 0x8e, 0x50, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0x95, 0x92, 0x22, 0x29, 0x49, 0x92, 0x42, 0x1c, 0x05, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0x54, 0x2a, 0x4a, 0x4a, 0x92, 0xa4, 0x94, 0x78, 0x50, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xa5, 0x54, 0xa9, 0x50, 0xf9, 0xff, 0xff, 0xff, 0xff, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x45, 0x25, 0x4b, 0xff, 0xff, 0xff, 0x5f, 0xff, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0x94, 0x94, 0x54, 0xe4, 0xff, 0xff, 0xff, 0x0f, 0xf8, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x55, 0x29, 0x45, 0xf9, 0x5f, 0x92, 0xe8, 0x03, 0x70, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0x52, 0x55, 0xaa, 0xfe, 0x93, 0x24, 0xe5, 0x01, 0x20, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xa5, 0x24, 0xfe, 0x2a, 0x49, 0xe4, 0xa0, 0x42, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x52, 0x4a, 0x49, 0x3f, 0xa2, 0x24, 0xe9, 0xf0, 0x43, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0x94, 0xaa, 0xbf, 0x24, 0x49, 0xe2, 0xf8, 0xc7, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0xc9, 0x2f, 0x95, 0x92, 0xf4, 0xf0, 0x87, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x52, 0xd5, 0x4f, 0x51, 0xa4, 0x7c, 0xf8, 0xc3, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x54, 0xf2, 0x97, 0x8a, 0x0a, 0xff, 0xf0, 0x87, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xf5, 0x25, 0x29, 0xd1, 0xff, 0xf0, 0xc3, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xf4, 0xa8, 0xa4, 0xd4, 0xef, 0xa1, 0x60, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0x2a, 0xf9, 0x25, 0x29, 0xe5, 0xcb, 0x00, 0x60, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0x52, 0xf5, 0x4a, 0x45, 0xf2, 0xd3, 0x03, 0xb0, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xa5, 0x7a, 0x29, 0xa9, 0xf4, 0xd2, 0x0f, 0x3c, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x7a, 0x4a, 0x4a, 0x79, 0x8a, 0xbf, 0x8e, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xbd, 0x52, 0x49, 0xfa, 0x90, 0xfc, 0x23, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x7d, 0xaa, 0x92, 0xba, 0x2a, 0x75, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xbd, 0x12, 0x55, 0x7e, 0x22, 0x79, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x5c, 0xaa, 0xa4, 0xbe, 0x94, 0x3c, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x9d, 0x4a, 0x89, 0xbc, 0x92, 0x2c, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x5e, 0x52, 0x55, 0x3d, 0x29, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xbe, 0x2a, 0x29, 0x5d, 0x22, 0x49, 0x52 }; vigor-0.016.orig/vigor/old_anims/vigor_wav2.xbm0100644000076400007640000003117207103707224020164 0ustar cjw44cjw44/* Vigor ending a wave */ #define vigor_wav2_width 128 #define vigor_wav2_height 128 static char vigor_wav2_bits[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xda, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xdb, 0xb6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xb0, 0xcd, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xb4, 0xff, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa0, 0xff, 0xff, 0xff, 0xff, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x6d, 0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x00, 0xf0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf4, 0xff, 0xaa, 0x00, 0xf0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x7f, 0x00, 0x00, 0xe0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x3f, 0x00, 0x00, 0xe0, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x3f, 0x00, 0x00, 0xe0, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x3f, 0x00, 0x00, 0xc0, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x80, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x00, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x1f, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x00, 0xfe, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0xf8, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x03, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0xfe, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x07, 0x00, 0x00, 0x00, 0xfc, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x03, 0x00, 0xe0, 0xff, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x05, 0x84, 0x28, 0xfd, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x07, 0xb4, 0x09, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x03, 0xbf, 0xff, 0x07, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0xbe, 0xff, 0x03, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xfc, 0xff, 0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0xf8, 0xff, 0xe3, 0xe1, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0x7c, 0x00, 0xf8, 0xff, 0xe1, 0xe1, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x00, 0xfc, 0x20, 0xf8, 0xff, 0xe1, 0xe1, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x1f, 0x00, 0x7e, 0x78, 0xf8, 0xff, 0xe1, 0xe1, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x3f, 0x00, 0xfc, 0x78, 0xf8, 0xff, 0x01, 0xe0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x1f, 0x00, 0x7e, 0x78, 0xf8, 0xff, 0x03, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x3f, 0x00, 0xfc, 0x50, 0xfc, 0xfb, 0x07, 0xf8, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x7f, 0x00, 0xfc, 0x01, 0xfe, 0xf3, 0x0f, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x00, 0xfe, 0x03, 0xfe, 0xc3, 0xff, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x01, 0xfc, 0x87, 0xff, 0xc0, 0xff, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x03, 0xf8, 0x87, 0xff, 0x81, 0xff, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x03, 0xfc, 0x87, 0xff, 0x00, 0xff, 0xfd, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x03, 0xf8, 0x83, 0xff, 0x80, 0xff, 0xfb, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0x01, 0xfc, 0x87, 0xff, 0x81, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x07, 0xf8, 0xc7, 0xff, 0x80, 0xff, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x07, 0xfc, 0xc7, 0xff, 0x00, 0xff, 0xfe, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0x07, 0xf8, 0xcf, 0xff, 0x00, 0xff, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0x07, 0xf8, 0x83, 0x7f, 0x80, 0xff, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x0f, 0xf8, 0xc7, 0xff, 0x80, 0xff, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0x0f, 0xfc, 0xe7, 0x3f, 0x00, 0xff, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x1f, 0xf8, 0x87, 0x7f, 0x80, 0xff, 0xfd, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, 0x1f, 0xf8, 0xc7, 0xff, 0x80, 0xff, 0xfe, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0x7f, 0xf8, 0xcf, 0x7f, 0x80, 0xff, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0xf9, 0x87, 0x7f, 0x00, 0xff, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xfb, 0xc7, 0x7f, 0xc0, 0xff, 0xf8, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xff, 0xff, 0xe7, 0x7f, 0x80, 0xff, 0xfe, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x87, 0x7f, 0x80, 0x7f, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xc7, 0x7f, 0x80, 0x7f, 0xfc, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xcf, 0xff, 0x80, 0xff, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0xc7, 0xff, 0x80, 0x7f, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x83, 0xff, 0xc0, 0xff, 0xfe, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x81, 0x7f, 0xc0, 0x7f, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x81, 0xff, 0x80, 0x7f, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x01, 0xff, 0xc0, 0x3f, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x80, 0xff, 0xc0, 0x7f, 0xfc, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x7f, 0x80, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x7f, 0x80, 0xff, 0xc0, 0x7f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe8, 0x39, 0x00, 0x7f, 0x80, 0x7f, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x01, 0x80, 0xff, 0xc0, 0x7f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xe0, 0x3f, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xc0, 0x3f, 0xfe, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xc0, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xc0, 0xbf, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xe0, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0xc0, 0x3f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xc0, 0xbf, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xc0, 0x1f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0xc0, 0x9f, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x80, 0x8a, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x80, 0xc0, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x80, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x7f, 0x00, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xe0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xc0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3f, 0x00, 0xe0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xc0, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7f, 0x00, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x00, 0xc0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xf0, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x01, 0xf8, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x07, 0xf0, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xbf, 0xfe, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xff, 0xff, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0xff, 0xff, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xec, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; vigor-0.016.orig/vigor/old_anims/vigor_rest.png0100664000076400007640000000111007103707224020247 0ustar cjw44cjw44‰PNG  IHDR€€ôà‘ùgAMA± üaPLTEÿÿÿ¥ÙŸÝ pHYs  ÒÝ~üØIDATxÚí›Ñrƒ0 ïþÿ§;mh›‚ì–ï܉œ2“Œ—•ddB@ó@@@@@ÀÿÀÏK °Mûg;D€½!ÀÚ˜И/ઘÊ@ÛŒ €"€Î,£ÃTà ®ëI6pƒN@Y¸¨{r‘$\9`7Àùìl7?Ãm®Î¿Í³í‹p"E’“ðë`Ò=é €( wóx €ó <­Ç@(PUƒ*Ø—¦b!Ú§ì¯ö ¨¼!²¡2pw†‚ ósàwD(뽇8­ ° á8ä™Fp³ ·Îæ¯q ë€8ìÏ‘ëqÆB$3ÐR@a4 PpÜŠ«ª€/®†ª´ûšúª nPõ×h«à¸ ¶ °H u¯`z,¸ˆ«àeWJoK&­Zr€ a!‚Û€g%|ú`ÜLAÿ®©Æ#ßOò@n=*¥Õ\Ú ,Ú !àûVA/ ß*ò¤¸ @™ÑtZ€Î3ub[78ú<Ûoå>Ô˜ð>ZBÚ˜ó‹ÙÀ'Û2ŽŒúƒC@€àEk7‘!ëÝ7IEND®B`‚vigor-0.016.orig/vigor/old_anims/vigor_ent_0003.xbm0100644000076400007640000003120107103707224020526 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0003_width 128 #define vigor_ent_0003_height 128 static char vigor_ent_0003_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x29, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x44, 0x05, 0x02, 0x81, 0x48, 0x21, 0x22, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x94, 0xa8, 0x28, 0x15, 0x08, 0x04, 0x44, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x42, 0x42, 0x42, 0xa0, 0xa2, 0x50, 0x00, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x48, 0x4a, 0x14, 0x05, 0x04, 0x02, 0x29, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x8a, 0x88, 0x42, 0xa8, 0x50, 0x54, 0x00, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x29, 0x29, 0x94, 0x02, 0x82, 0x00, 0x4a, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x42, 0x42, 0x41, 0xa8, 0x14, 0x52, 0x00, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4a, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x52, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x24, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x08, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x49, 0x8a, 0x42, 0xe1, 0x7f, 0x51, 0x41, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0x24, 0x11, 0x14, 0xfe, 0xff, 0x07, 0x04, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0x49, 0x52, 0xa1, 0xff, 0xff, 0x9f, 0x50, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0x92, 0x24, 0xca, 0xff, 0xff, 0x7f, 0x02, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0xa4, 0xf0, 0x3f, 0xa0, 0xff, 0x4a, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x24, 0x09, 0xfd, 0x4f, 0x15, 0xff, 0x21, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x49, 0x52, 0xfe, 0x08, 0x40, 0xfc, 0x07, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0x25, 0x89, 0x7f, 0x52, 0x95, 0xe8, 0x57, 0x08, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0x29, 0xa9, 0x5f, 0x82, 0x10, 0xd1, 0x0f, 0x81, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xa2, 0xc4, 0x9f, 0x14, 0x45, 0x84, 0x5f, 0x14, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0x0a, 0xe9, 0x27, 0x51, 0x10, 0xa9, 0xbf, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x54, 0xd2, 0x93, 0x84, 0x4a, 0x00, 0x7e, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x91, 0xf2, 0x13, 0x29, 0x88, 0xaa, 0xfc, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x2a, 0xf2, 0x25, 0x42, 0x51, 0x00, 0xfd, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x44, 0xfa, 0xa4, 0x14, 0x85, 0x2a, 0xf0, 0xab, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x7c, 0x09, 0x49, 0x28, 0x40, 0xe5, 0x07, 0x1e, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x2a, 0x7d, 0x52, 0x92, 0x42, 0x15, 0xc8, 0x5f, 0x41, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x7e, 0x49, 0x49, 0x14, 0xa2, 0xa2, 0x1f, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x7e, 0x12, 0x11, 0xa1, 0x08, 0x88, 0xbf, 0x41, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x3d, 0x49, 0x4a, 0x0a, 0xf5, 0xa2, 0xff, 0x0b, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0x5f, 0x92, 0x90, 0xd0, 0xff, 0xef, 0xff, 0x21, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0x5e, 0x49, 0x4a, 0xca, 0xff, 0xff, 0xc1, 0x93, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0x1e, 0x4a, 0x49, 0xfa, 0xff, 0x3f, 0x00, 0x03, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xbf, 0x28, 0x92, 0xfc, 0x97, 0x3f, 0x00, 0x2e, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xbe, 0xa2, 0x24, 0xff, 0x22, 0x0e, 0x04, 0x8c, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0x5e, 0x8a, 0x92, 0xbf, 0x48, 0x1f, 0x1e, 0x1c, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0x9e, 0x28, 0x92, 0x3f, 0x49, 0x0e, 0x3f, 0x7c, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0x3f, 0xa5, 0xa4, 0x9f, 0x84, 0x0e, 0x7f, 0x78, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x5d, 0x09, 0xc9, 0x27, 0x29, 0x8e, 0x7f, 0xf8, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0x49, 0x3e, 0x55, 0xd2, 0x8f, 0x44, 0x8e, 0x7f, 0xf8, 0x11, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0x7d, 0xa2, 0xe4, 0x2b, 0x91, 0x0e, 0x3e, 0xfc, 0x53, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0x8a, 0x7e, 0x49, 0xe9, 0x45, 0x4a, 0x1e, 0x1e, 0xec, 0x07, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0x7a, 0x2a, 0xf2, 0x95, 0x48, 0x0e, 0x00, 0xe4, 0x2f, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0xfc, 0x44, 0xe5, 0x21, 0x91, 0x3c, 0x00, 0x8e, 0x9f, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0xf9, 0x29, 0xe9, 0x4a, 0x92, 0x7e, 0x80, 0x4b, 0x3f, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0xf5, 0x4b, 0xfa, 0x29, 0xc9, 0xff, 0xcb, 0x27, 0x7e, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0xf2, 0x53, 0xf9, 0x42, 0x72, 0xe9, 0xff, 0x8f, 0xfe, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xe5, 0x27, 0xf2, 0x95, 0xe4, 0xa4, 0xbf, 0x3f, 0xf8, 0x2b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0xca, 0xaf, 0xf4, 0xff, 0xeb, 0x24, 0x0a, 0x3f, 0xf5, 0x23, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0xd4, 0xbf, 0xe2, 0x7f, 0x7f, 0x92, 0x50, 0xfc, 0xf0, 0x8f, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0x3f, 0xea, 0x0f, 0x7c, 0x22, 0x05, 0xfd, 0xe2, 0x0f, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0x7f, 0xd1, 0x03, 0x60, 0x49, 0xa8, 0xf0, 0x89, 0x9f, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0xfc, 0xe5, 0x01, 0xc0, 0x92, 0x22, 0xea, 0x43, 0x3f, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0xfd, 0xe9, 0x01, 0x80, 0x44, 0x44, 0xd1, 0x17, 0x7e, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0xf9, 0xeb, 0xc0, 0x80, 0x94, 0x14, 0xc2, 0xaf, 0xfc, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xea, 0xf7, 0xe0, 0x83, 0x21, 0xa1, 0x14, 0x1f, 0xf9, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xca, 0x7f, 0xf0, 0x07, 0x4b, 0x8a, 0xa0, 0x3e, 0xf4, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x94, 0x7f, 0xf0, 0x0f, 0x25, 0x11, 0x05, 0x7d, 0xe9, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0x52, 0x7f, 0xf8, 0x07, 0x49, 0x52, 0x54, 0xf8, 0xd1, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x7e, 0xf0, 0x07, 0x93, 0x84, 0x82, 0xf2, 0x85, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xa4, 0x7e, 0xe0, 0x83, 0x25, 0x29, 0x28, 0xe2, 0x53, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0x95, 0xfa, 0xc0, 0x81, 0x49, 0x92, 0x42, 0xd4, 0x07, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0x54, 0xfa, 0x00, 0x80, 0x92, 0xa4, 0x94, 0xd0, 0x5f, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xa5, 0xf4, 0x01, 0xc0, 0x49, 0x12, 0x49, 0x82, 0x1f, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xfd, 0x03, 0x60, 0x92, 0x24, 0x49, 0x2a, 0x7e, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0x94, 0xfe, 0x0b, 0xe4, 0x25, 0x49, 0x22, 0x41, 0x7d, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x55, 0x29, 0x3f, 0xfd, 0x49, 0x92, 0x48, 0x14, 0xfc, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0x52, 0x55, 0xfe, 0xff, 0x93, 0x24, 0x25, 0x49, 0xf1, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xa5, 0xfc, 0xea, 0x2f, 0x49, 0x44, 0x22, 0xd2, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x52, 0x4a, 0xf9, 0xe9, 0xaf, 0x24, 0x29, 0x49, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0x94, 0xfa, 0xa3, 0x3f, 0x49, 0x42, 0x12, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0xe9, 0x2f, 0xbf, 0x92, 0x14, 0x49, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x52, 0xd5, 0x4f, 0x7f, 0xa4, 0x24, 0x11, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x54, 0xd2, 0x9f, 0xfe, 0x0a, 0x49, 0x4a, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x3f, 0xf9, 0x51, 0x92, 0x90, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xa4, 0xfe, 0xf4, 0x97, 0x24, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0x2a, 0x29, 0xfd, 0xe9, 0x27, 0x49, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0x52, 0xa5, 0xfa, 0xc5, 0x5f, 0x92, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xa5, 0x2a, 0xf9, 0xab, 0x9f, 0x52, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0xea, 0x4f, 0x3f, 0x8a, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xa5, 0xd2, 0x4f, 0xfe, 0x90, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0xaa, 0x9f, 0xfe, 0x2a, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xa5, 0x12, 0x7f, 0xfa, 0x23, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x54, 0xaa, 0xfe, 0xfa, 0x97, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x4a, 0xfd, 0xe8, 0x97, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0x52, 0xfd, 0xe5, 0x2f, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x2a, 0xf9, 0xcb, 0x3f, 0x49, 0x52 }; vigor-0.016.orig/vigor/vigor.c0100644000076400007640000002657107103707420014721 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" /* FIXME Most of these are unnecessary. */ #include #include #include #ifdef HAVE_SYS_SELECT_H #include #endif #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vigor_extern.h" #include "vigor_empty.xbm" #include "vigor_rest.xbm" #include "vigor_ent_0001.xbm" #include "vigor_ent_0002.xbm" #include "vigor_ent_0003.xbm" #include "vigor_ent_0004.xbm" #include "vigor_wav_0001.xbm" #include "vigor_wav_0002.xbm" #include "v2cp0000.xbm" #include "v2cp0001.xbm" #include "v2cp0002.xbm" #include "v2cp0003.xbm" #include "v2cp0004.xbm" #include "vigor.tcl.h" static void init_vigor_phrases __P((void)); /* Some platforms and/or versions of TCL may require this to be a void* * or char*. I haven't heard of anybody who does, though, so tell me * if you do. * * I hate global variables as much as the next guy, but I make an * allowance in quick hacks. Passing down the GS to all the hooks * that I use would represent a significant rewrite of nvi code. */ static Tcl_Interp *vigor_interp = NULL; /* * The initialization sets up the interpreter, all the external stuff * that Vigor needs, and then calls the Tcl vigor_init. That handles * the EULA and greeting. */ int vigor_init(gp) GS *gp; { tcl_init(gp); vigor_interp = gp->tcl_interp; /* We put Tk_Init in Vigor since the user probably isn't going * to want tk's main window cluttering up the place. I should * use a wm_withdraw instead. */ if (Tk_Init(vigor_interp) == TCL_ERROR) { fprintf(stderr, "%s\n", vigor_interp->result); return (1); } #if 0 if (Tcl_EvalFile(vigor_interp, "vigor.tcl") == TCL_ERROR) return (1); #endif if (Tcl_Eval(vigor_interp, vigor_tcl) == TCL_ERROR) { fprintf(stderr, "%s\n", vigor_interp->result); return (1); } /* I don't want to use a #define for the Tk_DefineBitmap calls * because I don't remember how this differs between ANSI and K&R. */ Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_empty"), vigor_empty_bits, vigor_empty_width, vigor_empty_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_rest"), vigor_rest_bits, vigor_rest_width, vigor_rest_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_ent_0001"), vigor_ent_0001_bits, vigor_ent_0001_width, vigor_ent_0001_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_ent_0002"), vigor_ent_0002_bits, vigor_ent_0002_width, vigor_ent_0002_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_ent_0003"), vigor_ent_0003_bits, vigor_ent_0003_width, vigor_ent_0003_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_ent_0004"), vigor_ent_0004_bits, vigor_ent_0004_width, vigor_ent_0004_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_wav_0001"), vigor_wav_0001_bits, vigor_wav_0001_width, vigor_wav_0001_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("vigor_wav_0002"), vigor_wav_0002_bits, vigor_wav_0002_width, vigor_wav_0002_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("v2cp0000"), v2cp0000_bits, v2cp0000_width, v2cp0000_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("v2cp0001"), v2cp0001_bits, v2cp0001_width, v2cp0001_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("v2cp0002"), v2cp0002_bits, v2cp0002_width, v2cp0002_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("v2cp0003"), v2cp0003_bits, v2cp0003_width, v2cp0003_height); Tk_DefineBitmap(vigor_interp, Tk_GetUid("v2cp0004"), v2cp0004_bits, v2cp0004_width, v2cp0004_height); init_vigor_phrases(); if (Tcl_Eval(vigor_interp, "vigor_init") == TCL_ERROR) { fprintf(stderr, "%s\n", vigor_interp->result); return (1); } return (0); } /* * These are the hooks that constitute most of Vigor's functionality. * They should be liberally called throughout the Vigor code. I wrote * the first version and included just a few hook calls, and never * really got around to adding more. Contributions are welcome! */ void vigor_comment(expr, gp) char *expr; GS *gp; { Tcl_VarEval(vigor_interp, "vigor_comment ", expr, (char*)NULL); } void vigor_hint(expr, gp) char *expr; GS *gp; { Tcl_VarEval(vigor_interp, "vigor_hint ", expr, (char*)NULL); } void vigor_confirm(expr, gp) char *expr; GS *gp; { Tcl_VarEval(vigor_interp, "vigor_confirm ", expr, (char*)NULL); } void vigor_maybe_confirm(prob, expr, gp) int prob; char *expr; GS *gp; { char buf[20]; sprintf(buf, " %i ", prob); Tcl_VarEval(vigor_interp, "vigor_maybe_confirm ", buf, expr, (char*)NULL); } void vigor_wizard(wizname, task0, task1, task2, this_task, descr, gp) char *wizname; char *task0, *task1, *task2; int this_task; char *descr; GS *gp; { char buf[1024]; sprintf(buf, "vigor_wizard %s %s %s %s %i ", wizname, task0, task1, task2, this_task); Tcl_VarEval(vigor_interp, buf, descr, (char*)NULL); } /* * vigor_maybe_wizard: Maybe offer to give the user a wizard. * * prob: Probability, a percentage figure * wizname: The name of the "wizard series". This should be something that * fits in the sentence, "You are %s". * task0: One possible wizard. This should fit into the sentence, "You are * trying to %s". * task1, task2: Same * this_task: Which task corresponds to the wizard being invoked. This is * presently ignored; task0 should always be the wizard being invoked. * The above strings should be less than about 1000 bytes. * descr: The wizard text. */ void vigor_maybe_wizard(prob, wizname, task0, task1, task2, this_task, descr, gp) int prob; char *wizname; char *task0, *task1, *task2; int this_task; char *descr; GS *gp; { char buf[1024]; sprintf(buf, "vigor_maybe_wizard %i %s %s %s %s %i ", prob, wizname, task0, task1, task2, this_task); Tcl_VarEval(vigor_interp, buf, descr, (char*)NULL); } /* * This section is responsible for handling key phrases that invoke * the wizards. This is one of the few areas of Vigor code that is * primarily C-based, since it's faster and much easier for this than * Tcl would be, particularly since I'm a C kinda guy. * * We handle this by watching user input for a particular series of * keystrokes. This has the advantage of being easy to implement. It * has the disadvantage of requiring the entire phrase to be typed * at once, with no mistakes. * * FIXME This could be better handled in the abbreviation expansion code. * If Vigor ever goes production-quality, then that will be one change. */ /* * This struct contains the phrase to watch for, a pointer that indicates * the next character in that phrase, and the args to vigor_wizard. * Note that in the current implementation, a phrase should start with * a character that is not used elsewhere in the phrase. * * This would be better implemented as an NDFA. This is inappropriate for * 12:15 AM silly-hacking when I want to get the next release out tonight. */ static struct vigor_phrase { char *phrase; char *cp; char *wizname; char *task0; char *task1; char *task2; int this_task; char *descr; } vigor_phrases[] = { { "#!", NULL, "\"starting a program\"", "\"write a shell script\"","\"write a C program\"","\"write Tcl code\"", 0, "\"You can use a shell script to give a series of commands that are " "implemented by the shell. You should give commands in shell " "language. The shell script should also tell the computer which " "shell it should be run under.\"" }, { "#include", NULL, "\"starting a program\"", "\"write a C program\"","\"write Tcl code\"","\"write a Lisp program\"", 0, "\"You can use a C program to perform a variety of tasks that cannot " "be easily written by shell scripts. Writing a C program requires " "careful attention to detail. You will have to compile your C program " "before you can use it.\"" }, /* Yes, assuming that an open paren is necessarily a sign of Lisp code * is very annoying. But if you think it's annoying to use Vigor, try * testing it sometime. */ { "(", NULL, "\"starting a program\"", "\"write a Lisp program\"","\"write Tcl code\"", "\"write a shell script\"", 0, "\"You can write a Lisp program to perform most tasks you can with a C " "program. Lisp programs also have the advantage that very few " "programmers know Lisp, so your employer will have to keep you on " "staff to maintain it.\"" }, { NULL, NULL, NULL, NULL, NULL, NULL, 0, NULL } }; void vigor_gotchar(ch) char ch; { struct vigor_phrase *pp; for (pp = vigor_phrases; pp->phrase; pp++) if (*pp->cp != ch) pp->cp = pp->phrase; else if (!*++pp->cp) vigor_wizard(pp->wizname, pp->task0, pp->task1, pp->task2, pp->this_task, pp->descr); } static void init_vigor_phrases() { struct vigor_phrase *pp; for (pp = vigor_phrases; pp->phrase; pp++) pp->cp = pp->phrase; } /* * This section handles the select overrides. In particular, we need * to replace select, so that Tk's timers can run. This is used for * animation and the random popups. */ static int waiting_for_input; static void tk_file_ev(clientData, mask) ClientData clientData; int mask; { waiting_for_input = 0; } static void tk_timer_ev(clientData) ClientData clientData; { waiting_for_input = 0; } int mega_select(nfds, readfds, writefds, exceptfds, timeout) int nfds; fd_set *readfds, *writefds, *exceptfds; struct timeval *timeout; { int fd; int mask; int ms; struct timeval notime; /* FIXME should be static */ Tk_TimerToken cookie; if (!vigor_interp) { /* Vigor has not yet been initialized... Use normal * select instead. */ return select(nfds, readfds, writefds, exceptfds, timeout); } Tcl_Eval(vigor_interp, "vigor_randomness"); /* Don't check the return code; we need to select anyway. */ for (fd = 0; fd < nfds; fd++) { mask = 0; if (readfds && FD_ISSET(fd, readfds)) mask |= TK_READABLE; if (writefds && FD_ISSET(fd, writefds)) mask |= TK_WRITABLE; if (exceptfds && FD_ISSET(fd, exceptfds)) mask |= TK_EXCEPTION; if (mask) Tk_CreateFileHandler(fd, mask, tk_file_ev, (ClientData) NULL); } waiting_for_input = 1; if (timeout) { ms = timeout->tv_usec / 1000 + timeout->tv_sec * 1000; if (ms > 0) { /* A non-zero timeout */ /* I don't know how often this happens. */ cookie = Tk_CreateTimerHandler(ms, tk_timer_ev, (ClientData) NULL); while (waiting_for_input) Tk_DoOneEvent(0); Tk_DeleteTimerHandler(cookie); } else { /* A zero timeout */ while (Tk_DoOneEvent(TK_DONT_WAIT) && waiting_for_input) /* nothing happens */; } } else { /* Indefinite timeout */ while (waiting_for_input) Tk_DoOneEvent(0); } for (fd = 0; fd < nfds; fd++) { /* Is there a Tk_FlushFileHandlers? * See Ousterhout's TCL book, p398, for why what I'm doing * here is wrong. */ Tk_DeleteFileHandler(fd); } /* Fortunately, we don't care about updating select's timeout * (which some Unices don't do anyway) */ notime.tv_usec = 0; notime.tv_sec = 0; return select(nfds, readfds, writefds, exceptfds, ¬ime); } vigor-0.016.orig/vigor/vigor_empty.xbm0100644000076400007640000003116507103707227016503 0ustar cjw44cjw44/* Vigor empty */ #define vigor_empty_width 128 #define vigor_empty_height 128 static char vigor_empty_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x29, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x44, 0x05, 0x02, 0x81, 0x48, 0x21, 0x22, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x94, 0xa8, 0x28, 0x15, 0x08, 0x04, 0x44, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x42, 0x42, 0x42, 0xa0, 0xa2, 0x50, 0x00, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x48, 0x4a, 0x14, 0x05, 0x04, 0x02, 0x29, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x8a, 0x88, 0x42, 0xa8, 0x50, 0x54, 0x00, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x29, 0x29, 0x94, 0x02, 0x82, 0x00, 0x4a, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x42, 0x42, 0x41, 0xa8, 0x14, 0x52, 0x00, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4a, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x52, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x24, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x08, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x49, 0x8a, 0x42, 0xa1, 0x40, 0x51, 0x41, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0x24, 0x11, 0x14, 0x0a, 0x0a, 0x04, 0x04, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0x49, 0x52, 0xa1, 0xa0, 0x50, 0x91, 0x50, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0x92, 0x24, 0x0a, 0x15, 0x05, 0x44, 0x02, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0xa4, 0x50, 0x20, 0xa0, 0x08, 0x4a, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x24, 0x09, 0x85, 0x4a, 0x15, 0x22, 0x20, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x49, 0x52, 0x94, 0x08, 0x40, 0x44, 0x05, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0x25, 0x89, 0x22, 0x52, 0x95, 0x08, 0x50, 0x08, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0x29, 0x29, 0x4a, 0x82, 0x10, 0x51, 0x05, 0x81, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xa2, 0x44, 0x91, 0x14, 0x45, 0x04, 0x50, 0x14, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0x0a, 0x29, 0x24, 0x51, 0x10, 0xa9, 0x82, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x54, 0x92, 0x92, 0x84, 0x4a, 0x00, 0x14, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x91, 0x52, 0x12, 0x29, 0x88, 0xaa, 0x40, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x2a, 0x82, 0x24, 0x42, 0x51, 0x00, 0x15, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x44, 0xaa, 0xa4, 0x14, 0x85, 0x2a, 0x20, 0xa8, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x04, 0x09, 0x49, 0x28, 0x40, 0x45, 0x01, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x2a, 0x59, 0x52, 0x92, 0x42, 0x15, 0x08, 0x55, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x22, 0x49, 0x49, 0x14, 0xa2, 0x22, 0x00, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x4a, 0x12, 0x11, 0xa1, 0x08, 0x88, 0x2a, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x29, 0x49, 0x4a, 0x0a, 0xa5, 0x22, 0x80, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0x45, 0x92, 0x90, 0x50, 0x08, 0x88, 0x2a, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0x52, 0x49, 0x4a, 0x8a, 0xa2, 0x22, 0x80, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0x14, 0x4a, 0x49, 0x22, 0x24, 0x24, 0x15, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xa9, 0x28, 0x92, 0x94, 0x92, 0x42, 0x40, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xa2, 0xa2, 0x24, 0x21, 0x22, 0x08, 0x15, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0x4a, 0x8a, 0x92, 0x94, 0x48, 0xa5, 0x40, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0x94, 0x28, 0x92, 0x22, 0x49, 0x08, 0x14, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0x29, 0xa5, 0x24, 0x94, 0x84, 0x52, 0x21, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x45, 0x09, 0x49, 0x21, 0x29, 0x02, 0x45, 0x41, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0x49, 0x2a, 0x55, 0x92, 0x8a, 0x44, 0x54, 0x08, 0x0a, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0x51, 0xa2, 0x24, 0x28, 0x91, 0x04, 0x51, 0xa0, 0x52, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0x8a, 0x4a, 0x49, 0x49, 0x45, 0x4a, 0x52, 0x82, 0x0a, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0x4a, 0x2a, 0x92, 0x94, 0x48, 0x44, 0x2a, 0xa0, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0x94, 0x44, 0x25, 0x21, 0x91, 0x28, 0x90, 0x0a, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0x51, 0x29, 0x49, 0x4a, 0x92, 0x82, 0x22, 0x48, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0x95, 0x4a, 0x2a, 0x29, 0x49, 0x54, 0x44, 0x21, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0x52, 0x52, 0x49, 0x42, 0x12, 0x89, 0x14, 0x8a, 0x8a, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xa5, 0x24, 0x92, 0x94, 0xa4, 0x24, 0xa1, 0x20, 0x20, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x8a, 0xaa, 0x54, 0x25, 0x89, 0x24, 0x0a, 0x25, 0x45, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x54, 0xa2, 0x22, 0x94, 0x24, 0x92, 0x50, 0x90, 0x10, 0x89, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0x2a, 0xaa, 0x22, 0x49, 0x22, 0x05, 0x05, 0x22, 0x01, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0x45, 0x91, 0x94, 0x24, 0x49, 0xa8, 0x50, 0x09, 0x94, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0x54, 0xa5, 0x24, 0x49, 0x92, 0x22, 0x0a, 0x40, 0x11, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0x25, 0x89, 0x52, 0x92, 0x44, 0x44, 0x51, 0x15, 0x44, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0x49, 0x2a, 0x8a, 0x92, 0x94, 0x14, 0x42, 0xa0, 0x08, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xaa, 0x52, 0x51, 0x24, 0x21, 0xa1, 0x14, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x4a, 0x4a, 0x4a, 0x49, 0x4a, 0x8a, 0xa0, 0x28, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x94, 0x94, 0x92, 0x92, 0x24, 0x11, 0x05, 0x45, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0x52, 0xa5, 0x54, 0x24, 0x49, 0x52, 0x54, 0x08, 0x51, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x28, 0x91, 0x4a, 0x92, 0x84, 0x82, 0x52, 0x04, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xa4, 0x4a, 0x55, 0x92, 0x24, 0x29, 0x28, 0x82, 0x50, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0x95, 0x92, 0x22, 0x29, 0x49, 0x92, 0x42, 0x14, 0x05, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0x54, 0x2a, 0x4a, 0x4a, 0x92, 0xa4, 0x94, 0x50, 0x50, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xa5, 0x54, 0xa9, 0x50, 0x49, 0x12, 0x49, 0x82, 0x0a, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x45, 0x25, 0x4b, 0x92, 0x24, 0x49, 0x2a, 0x40, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0x94, 0x94, 0x54, 0x24, 0x25, 0x49, 0x22, 0x41, 0x15, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x55, 0x29, 0x45, 0x49, 0x49, 0x92, 0x48, 0x14, 0x44, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0x52, 0x55, 0xaa, 0x12, 0x92, 0x24, 0x25, 0x49, 0x11, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xa5, 0x24, 0xaa, 0x2a, 0x49, 0x44, 0x22, 0x52, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x52, 0x4a, 0x49, 0x29, 0xa2, 0x24, 0x29, 0x49, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0x94, 0xaa, 0xa2, 0x24, 0x49, 0x42, 0x12, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x49, 0x2a, 0x95, 0x92, 0x14, 0x49, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x52, 0x95, 0x4a, 0x51, 0xa4, 0x24, 0x11, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x54, 0x52, 0x94, 0x8a, 0x0a, 0x49, 0x4a, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x25, 0x29, 0x51, 0x92, 0x90, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xa4, 0xa8, 0xa4, 0x94, 0x24, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0x2a, 0x29, 0x25, 0x29, 0x25, 0x49, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0x52, 0xa5, 0x4a, 0x45, 0x52, 0x92, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xa5, 0x2a, 0x29, 0xa9, 0x94, 0x52, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0x4a, 0x4a, 0x21, 0x8a, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xa5, 0x52, 0x49, 0xaa, 0x90, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0xaa, 0x92, 0x92, 0x2a, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xa5, 0x12, 0x55, 0x52, 0x22, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x54, 0xaa, 0xa4, 0x8a, 0x94, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x4a, 0x89, 0xa8, 0x92, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0x52, 0x55, 0x25, 0x29, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x2a, 0x29, 0x49, 0x22, 0x49, 0x52 }; vigor-0.016.orig/vigor/vigor_rest.xbm0100644000076400007640000003116407103707227016321 0ustar cjw44cjw44/* Vigor at rest */ #define vigor_rest_width 128 #define vigor_rest_height 128 static char vigor_rest_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0xf8, 0x0f, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0xff, 0xff, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0xe4, 0xff, 0xff, 0x87, 0x00, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0xf8, 0xff, 0xff, 0x1f, 0x12, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0xfe, 0x0f, 0xf0, 0x7f, 0x80, 0x00, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0xff, 0x40, 0x02, 0xff, 0x04, 0x09, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x3f, 0x0a, 0x49, 0xfc, 0x11, 0x20, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0xd5, 0x4f, 0x20, 0x00, 0xf0, 0x03, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xe0, 0x27, 0x85, 0x94, 0xe4, 0x27, 0x21, 0x48, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0xf5, 0x07, 0x10, 0x00, 0xc0, 0x0f, 0x04, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0xf8, 0x51, 0x45, 0xa9, 0x84, 0x4f, 0x40, 0x02, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0x44, 0xf9, 0x02, 0x08, 0x00, 0x10, 0x9f, 0x08, 0x10, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x28, 0x29, 0x7c, 0x28, 0xa1, 0x92, 0x42, 0x3e, 0x40, 0x00, 0x20, 0x20, 0x00, 0x52, 0x49, 0x92, 0x42, 0x42, 0xbd, 0x22, 0x04, 0x02, 0x08, 0x3c, 0x82, 0x44, 0x02, 0x02, 0x01, 0x94, 0x92, 0x24, 0x89, 0x08, 0x3c, 0x88, 0x90, 0x28, 0x21, 0xbd, 0x08, 0x00, 0x00, 0x00, 0x08, 0x25, 0x94, 0x24, 0x29, 0xa9, 0x7e, 0x91, 0x12, 0x00, 0x04, 0x7c, 0x00, 0x24, 0x44, 0x10, 0x00, 0x48, 0x51, 0x92, 0x44, 0x42, 0x1e, 0x02, 0x40, 0xa5, 0x90, 0x78, 0x49, 0x80, 0x00, 0x02, 0x00, 0x52, 0x45, 0x92, 0x94, 0x94, 0x5e, 0xa8, 0x0a, 0x04, 0x02, 0x79, 0x80, 0x04, 0x08, 0x20, 0x11, 0x25, 0x29, 0x49, 0x42, 0x42, 0x9f, 0x02, 0x50, 0x90, 0x48, 0xf8, 0x04, 0x20, 0x40, 0x00, 0x00, 0x29, 0x25, 0x49, 0x4a, 0x14, 0x2f, 0xa8, 0x82, 0x12, 0x00, 0xf1, 0x10, 0x41, 0x02, 0x02, 0x00, 0xa2, 0x48, 0x92, 0x88, 0xa2, 0x4f, 0x05, 0x24, 0x40, 0x15, 0xf4, 0x44, 0x04, 0x10, 0x10, 0x01, 0x8d, 0x92, 0x24, 0x29, 0x08, 0x1f, 0xa8, 0x44, 0x0a, 0x80, 0xf0, 0x00, 0x80, 0x40, 0x00, 0x10, 0x50, 0x2a, 0x49, 0x92, 0x52, 0x4f, 0x01, 0x10, 0xa1, 0x14, 0xf2, 0x44, 0x04, 0x02, 0x22, 0x02, 0x55, 0x49, 0x92, 0xa4, 0x04, 0x2f, 0xaa, 0x22, 0x04, 0x40, 0xf0, 0x88, 0x20, 0x08, 0x00, 0x00, 0x22, 0x52, 0x25, 0x09, 0xa9, 0x4f, 0x01, 0xf4, 0xaf, 0x12, 0xf5, 0x00, 0x04, 0x20, 0x04, 0x08, 0xaa, 0x94, 0x48, 0x52, 0x22, 0x0f, 0xaa, 0xfe, 0x7f, 0x22, 0xf0, 0x92, 0x20, 0x41, 0x90, 0x00, 0x52, 0x49, 0x95, 0x24, 0x89, 0xaf, 0x90, 0xff, 0xff, 0x81, 0xf4, 0x00, 0x02, 0x04, 0x00, 0x10, 0x25, 0x29, 0x22, 0x49, 0x2a, 0x2f, 0xd2, 0xff, 0xff, 0x17, 0xf0, 0x24, 0x48, 0x00, 0x02, 0x01, 0x4a, 0x45, 0x55, 0x92, 0x90, 0x4f, 0xf1, 0x1f, 0xf8, 0x4f, 0xf9, 0x80, 0x00, 0x24, 0x08, 0x20, 0x92, 0x94, 0x88, 0x92, 0x12, 0x1f, 0xfa, 0xa3, 0xc2, 0x1f, 0xf0, 0x14, 0x92, 0x80, 0x20, 0x02, 0x2a, 0x29, 0x55, 0x24, 0x49, 0x4f, 0xf9, 0x14, 0x14, 0x5f, 0xf1, 0x40, 0x00, 0x04, 0x00, 0x00, 0xa9, 0x4a, 0x49, 0x29, 0x49, 0x1f, 0x7d, 0xa1, 0x40, 0x3e, 0xf2, 0x05, 0x92, 0x90, 0x44, 0x10, 0x52, 0x52, 0x92, 0x42, 0x12, 0x4f, 0x3c, 0x0a, 0x15, 0x3d, 0xf8, 0x90, 0x00, 0x04, 0x00, 0x01, 0x95, 0x94, 0x94, 0x54, 0x52, 0x9f, 0xbe, 0x50, 0x20, 0x7c, 0xf1, 0x02, 0x92, 0x20, 0x12, 0x02, 0x52, 0xa5, 0x52, 0x8a, 0x24, 0xcf, 0x3f, 0x02, 0x45, 0x79, 0xf4, 0x28, 0x00, 0x08, 0x00, 0x48, 0x95, 0x94, 0x44, 0x29, 0x49, 0xef, 0xff, 0x54, 0x08, 0xf9, 0xf3, 0x81, 0x24, 0x81, 0x44, 0x00, 0x52, 0x29, 0x95, 0xa4, 0x24, 0xff, 0xe0, 0x81, 0x12, 0xfe, 0xff, 0x48, 0x00, 0x08, 0x00, 0x00, 0x94, 0x4a, 0x29, 0x25, 0x49, 0x3f, 0x80, 0x2b, 0x52, 0x0f, 0xfe, 0x01, 0x2a, 0x21, 0x91, 0x12, 0xa5, 0x54, 0x52, 0x94, 0x92, 0x0f, 0x00, 0x46, 0x80, 0x03, 0xf8, 0x54, 0x00, 0x08, 0x04, 0x00, 0x55, 0x91, 0x4a, 0x51, 0x24, 0x0f, 0x00, 0x4e, 0xd5, 0x01, 0xf0, 0x80, 0x24, 0x41, 0x00, 0x22, 0x4a, 0x55, 0x52, 0xa5, 0xbe, 0x07, 0x00, 0x2c, 0xc8, 0x00, 0xe0, 0x3e, 0x00, 0x04, 0x49, 0x00, 0x29, 0xa5, 0x24, 0x4a, 0x6e, 0x07, 0x1f, 0x9c, 0xef, 0xf0, 0xe1, 0x66, 0xa9, 0x10, 0x00, 0x08, 0x4a, 0x49, 0x55, 0x91, 0xd2, 0x83, 0x3f, 0xd8, 0x6c, 0xf8, 0xc3, 0x53, 0x04, 0x44, 0x92, 0x20, 0x55, 0x95, 0x44, 0x25, 0xa5, 0x83, 0x3f, 0x78, 0x79, 0xf8, 0xc3, 0x83, 0x80, 0x00, 0x00, 0x02, 0x2a, 0x55, 0x29, 0x55, 0x92, 0x83, 0x3f, 0x38, 0x72, 0xf8, 0xc3, 0x28, 0x2a, 0x4a, 0x92, 0x20, 0x49, 0x29, 0x55, 0x92, 0x24, 0x83, 0x3f, 0xb8, 0x64, 0xf8, 0xc3, 0x41, 0x00, 0x00, 0x00, 0x04, 0xaa, 0x52, 0x49, 0x29, 0x49, 0x83, 0x3f, 0x18, 0x69, 0xf8, 0xc3, 0x04, 0xa9, 0x94, 0x24, 0x40, 0x2a, 0x95, 0x52, 0x4a, 0x55, 0x07, 0x1f, 0x5c, 0xe2, 0xf0, 0xe1, 0x28, 0x01, 0x00, 0x00, 0x09, 0x55, 0xa5, 0x4a, 0x51, 0x42, 0x07, 0x00, 0x2c, 0xc9, 0x00, 0xe0, 0x02, 0xa4, 0x54, 0x49, 0x00, 0xa4, 0x54, 0x2a, 0x95, 0x54, 0x0f, 0x00, 0x2e, 0xd2, 0x01, 0xf0, 0xa4, 0x00, 0x00, 0x00, 0x22, 0x55, 0x95, 0xa4, 0x52, 0x85, 0x0f, 0x00, 0x46, 0xc4, 0x03, 0xf8, 0x10, 0x4a, 0x91, 0x24, 0x08, 0x4a, 0xa9, 0x4a, 0x4a, 0x2a, 0x3f, 0x80, 0x97, 0x14, 0x0f, 0xfe, 0x42, 0x08, 0x82, 0x80, 0x00, 0x55, 0x55, 0x55, 0xa9, 0x54, 0xff, 0xe0, 0x21, 0x41, 0xfe, 0xff, 0x14, 0x21, 0x08, 0x0a, 0x12, 0x2a, 0x25, 0x29, 0x25, 0x45, 0xef, 0xff, 0x4a, 0x4a, 0xf9, 0xf3, 0x20, 0x44, 0x51, 0x50, 0x20, 0xaa, 0xaa, 0x52, 0x49, 0xaa, 0xaf, 0xbf, 0x24, 0x09, 0xf2, 0xf4, 0x42, 0x11, 0x04, 0x02, 0x02, 0x52, 0xaa, 0x4a, 0xaa, 0x12, 0x4f, 0x9f, 0x24, 0xa9, 0xf4, 0xf1, 0x0a, 0x82, 0x40, 0x40, 0x24, 0x55, 0x49, 0xaa, 0x92, 0xa4, 0x9f, 0x4f, 0x92, 0x44, 0xf2, 0xf4, 0x50, 0x28, 0x0a, 0x15, 0x00, 0x55, 0x55, 0xa9, 0xaa, 0x2a, 0x2f, 0x9f, 0x24, 0x49, 0xf4, 0xf1, 0x82, 0x42, 0x20, 0x80, 0x24, 0xaa, 0xaa, 0x92, 0x24, 0x49, 0xaf, 0x2f, 0x49, 0x24, 0xf1, 0xf4, 0x14, 0x08, 0x85, 0x24, 0x00, 0x4a, 0xa5, 0xaa, 0x4a, 0x52, 0x0f, 0x4f, 0x92, 0x24, 0xf5, 0xf4, 0xa0, 0x22, 0x90, 0x00, 0x29, 0x55, 0x95, 0x4a, 0x55, 0x95, 0x5f, 0x9f, 0x24, 0x89, 0xf8, 0xf2, 0x0a, 0x88, 0x02, 0x2a, 0x04, 0x55, 0xaa, 0x54, 0x52, 0x25, 0x5f, 0x5f, 0x49, 0x29, 0xf1, 0xf4, 0xa0, 0x22, 0x54, 0x80, 0x20, 0xaa, 0xaa, 0x4a, 0x25, 0xa9, 0x4f, 0x8f, 0x12, 0x42, 0xfa, 0xf0, 0x0a, 0x88, 0x00, 0x49, 0x04, 0x55, 0x55, 0x55, 0x55, 0x2a, 0x4f, 0x2f, 0xa4, 0x94, 0xf0, 0xf5, 0xa1, 0x22, 0x2a, 0x81, 0x20, 0xaa, 0x4a, 0x2a, 0xa5, 0x52, 0x9f, 0xaf, 0x2a, 0x49, 0xfa, 0xf8, 0x14, 0x84, 0x00, 0x14, 0x0a, 0xaa, 0xaa, 0x52, 0xaa, 0x4a, 0x2f, 0x9f, 0x22, 0x49, 0xf1, 0xf1, 0xa1, 0x28, 0xa9, 0x40, 0x20, 0x55, 0xaa, 0xaa, 0x4a, 0x52, 0xaf, 0x2f, 0x54, 0x12, 0xfa, 0xfa, 0x04, 0x81, 0x04, 0x0a, 0x89, 0xaa, 0xaa, 0xaa, 0x52, 0x55, 0x2f, 0x4f, 0x85, 0xa4, 0xf0, 0xf0, 0x29, 0x15, 0x50, 0x20, 0x00, 0x55, 0x55, 0x25, 0x95, 0xa4, 0x4f, 0x5f, 0x2a, 0x49, 0xf5, 0xfa, 0x44, 0xa0, 0x82, 0x92, 0x2a, 0x55, 0x55, 0xaa, 0xaa, 0x2a, 0x5f, 0x9f, 0x50, 0x12, 0xf4, 0xf0, 0x89, 0x0a, 0x14, 0x02, 0x00, 0xaa, 0xaa, 0xaa, 0x54, 0x49, 0xaf, 0xaf, 0x4a, 0xa5, 0xf2, 0xfa, 0x24, 0x50, 0x41, 0x28, 0x49, 0xaa, 0x52, 0x55, 0x25, 0x55, 0x1f, 0x9f, 0x92, 0xa8, 0xf4, 0xf1, 0x48, 0x05, 0x14, 0x21, 0x08, 0x55, 0x55, 0xa5, 0xaa, 0x52, 0xaf, 0x4f, 0x2a, 0x05, 0xf9, 0xf4, 0x22, 0xa8, 0x40, 0x84, 0x22, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x2f, 0x5f, 0xa2, 0x54, 0xf2, 0xf2, 0x8a, 0x02, 0x15, 0x11, 0x20, 0x55, 0x55, 0x95, 0x94, 0xaa, 0xaf, 0x4f, 0x15, 0x29, 0xf9, 0xf4, 0x50, 0x54, 0x20, 0x44, 0x85, 0x55, 0x55, 0xaa, 0x2a, 0x29, 0x2f, 0x5f, 0x52, 0x45, 0xf2, 0xf4, 0x05, 0x41, 0x45, 0x11, 0x10, 0xaa, 0xaa, 0x55, 0xa9, 0xca, 0xaf, 0x8f, 0x24, 0x52, 0xf9, 0xf2, 0xa8, 0x14, 0x08, 0x44, 0x45, 0xaa, 0x2a, 0x55, 0x55, 0x15, 0x2f, 0xaf, 0xaa, 0x14, 0xf2, 0xf4, 0x12, 0xa1, 0x52, 0x09, 0x08, 0x55, 0x55, 0x55, 0x55, 0x6a, 0xaf, 0x9f, 0x24, 0xa9, 0xf4, 0xf2, 0xa4, 0x14, 0x08, 0x24, 0x21, 0x56, 0x55, 0x55, 0xa5, 0x4a, 0x2f, 0x2f, 0xa9, 0x42, 0xf5, 0xf4, 0x09, 0xa1, 0xa2, 0x20, 0x24, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xaf, 0xaf, 0x92, 0x2c, 0xf8, 0xf2, 0xa4, 0x04, 0x09, 0x85, 0x80, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x5f, 0x2f, 0x25, 0xc9, 0xf2, 0xf4, 0x09, 0x29, 0x51, 0x28, 0x15, 0x55, 0x55, 0xa5, 0xaa, 0xaa, 0xaf, 0xaf, 0xaa, 0x14, 0xf5, 0xf9, 0xa4, 0x24, 0x0a, 0x81, 0x40, 0x6a, 0x55, 0xad, 0x2a, 0x25, 0x2f, 0xaf, 0x48, 0x51, 0xf4, 0xf2, 0x94, 0xa4, 0x20, 0x15, 0x0a, 0x55, 0xab, 0x52, 0xa9, 0xaa, 0xaf, 0x4f, 0x95, 0xaa, 0xf2, 0xf4, 0x42, 0x02, 0x95, 0xa0, 0x50, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x4e, 0x2f, 0xa5, 0x44, 0x6a, 0xf5, 0x4a, 0x54, 0x10, 0x0a, 0x02, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x57, 0xaf, 0x94, 0x2a, 0x69, 0xf8, 0x88, 0x22, 0x45, 0xa1, 0x54, 0xaa, 0xaa, 0xaa, 0xaa, 0x24, 0x55, 0x4f, 0x29, 0x49, 0xc9, 0xf2, 0x29, 0x24, 0x11, 0x8a, 0x00, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x5f, 0x55, 0x52, 0x12, 0xf5, 0x52, 0x89, 0xa4, 0x10, 0xaa, 0x6d, 0xad, 0xaa, 0xaa, 0xaa, 0x92, 0x3e, 0x49, 0x95, 0xaa, 0xf8, 0x04, 0x29, 0x09, 0xa2, 0x00, 0x55, 0xd5, 0xaa, 0xaa, 0x2a, 0x55, 0x5f, 0x55, 0x52, 0x92, 0x7a, 0xaa, 0x44, 0x52, 0x09, 0x95, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x7e, 0x49, 0x95, 0x24, 0x7d, 0x21, 0x49, 0x22, 0x52, 0x10, 0xad, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x3e, 0x55, 0x52, 0x55, 0xbe, 0x4c, 0x12, 0x49, 0x84, 0x42, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x7c, 0x92, 0x24, 0x91, 0x3e, 0x91, 0x24, 0x89, 0x28, 0x14, 0x55, 0xb5, 0x55, 0x55, 0x55, 0x55, 0xfd, 0xaa, 0x4a, 0x26, 0x7f, 0x4a, 0x92, 0x24, 0x85, 0x42, 0x56, 0x55, 0x55, 0x55, 0xa5, 0xaa, 0xfa, 0xaa, 0xaa, 0x54, 0x9f, 0x92, 0x24, 0x49, 0x28, 0x14, 0xb5, 0x55, 0xab, 0xaa, 0xaa, 0x4a, 0xf5, 0x93, 0x54, 0xc9, 0x2f, 0x24, 0x49, 0x24, 0x41, 0xa1, 0xad, 0x56, 0xad, 0xaa, 0xaa, 0xaa, 0xea, 0x2f, 0x45, 0xf2, 0xaf, 0x49, 0x92, 0x24, 0x15, 0x0a, 0x55, 0xb5, 0xaa, 0xaa, 0xaa, 0x2a, 0xd5, 0x5f, 0x99, 0xfa, 0x23, 0x2a, 0x49, 0x49, 0xa2, 0x50, 0xb5, 0x55, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0xff, 0x52, 0xff, 0x4b, 0x49, 0x12, 0x49, 0x0a, 0x05, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0xff, 0xff, 0xff, 0x54, 0x92, 0xa4, 0x24, 0x51, 0xa8, 0xb5, 0x6a, 0xab, 0xaa, 0x2a, 0x55, 0x55, 0xfd, 0xff, 0xbf, 0x92, 0x52, 0x89, 0x44, 0x84, 0x02, 0xad, 0x55, 0xb5, 0x55, 0xd5, 0xaa, 0xaa, 0xfa, 0xff, 0x2f, 0x25, 0x25, 0x55, 0x92, 0x52, 0x54, 0xaa, 0x56, 0x55, 0x55, 0x95, 0x54, 0xa5, 0x52, 0xff, 0x54, 0xa9, 0x48, 0x84, 0x24, 0x12, 0x11, 0x6d, 0xb5, 0x55, 0xad, 0x6a, 0x55, 0x55, 0xaa, 0xaa, 0x92, 0x12, 0x95, 0x52, 0x92, 0xa4, 0x44, 0xab, 0x55, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x95, 0x24, 0xa5, 0x54, 0xa5, 0x94, 0x24, 0x09, 0x49, 0xb6, 0xb6, 0x6a, 0xb5, 0xaa, 0x2a, 0x55, 0xa9, 0xaa, 0x2a, 0x25, 0x4a, 0x22, 0x49, 0x52, 0x12, 0xad, 0xaa, 0xaa, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0x55, 0x91, 0x54, 0x92, 0x44, 0x52, 0x6a, 0x6b, 0xab, 0xaa, 0x55, 0x55, 0xa9, 0x2a, 0x49, 0x29, 0x49, 0x56, 0x45, 0x25, 0x29, 0x81, 0xdb, 0x5a, 0xad, 0x5a, 0x55, 0x55, 0x4b, 0xa5, 0xaa, 0x52, 0xaa, 0x90, 0x94, 0x48, 0x22, 0x2a, 0x56, 0xab, 0xda, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x95, 0xaa, 0x92, 0x26, 0x29, 0x95, 0x94, 0x44, 0xb5, 0xb6, 0x55, 0xab, 0x5a, 0x55, 0x55, 0xaa, 0x54, 0x95, 0xa4, 0x48, 0x45, 0x22, 0x91, 0x14, 0x6d, 0x55, 0x55, 0xb5, 0x55, 0x55, 0x55, 0x55, 0x95, 0xa4, 0x2a, 0x2b, 0xaa, 0x54, 0x4a, 0xa2, 0xab, 0x6d, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xaa, 0x4a, 0x52, 0x11, 0x45, 0x91, 0x08, 0xb6, 0xda, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0xa9, 0xaa, 0x4a, 0x52, 0x25, 0xa5, 0x28, 0x4a, 0x52, 0xd5, 0x56, 0x5b, 0xb5, 0x56, 0x55, 0x55, 0x95, 0xaa, 0x54, 0x95, 0x54, 0xaa, 0x4a, 0x92, 0x4a }; vigor-0.016.orig/vigor/vigor_empty.xcf0100644000076400007640000004134507103707230016470 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿªAAE=48$(&2PLN`dprtD02 XTV,(*€€BB‰¼path 0 BtB\B‚BPB‚BPBŠB\BŠB\BŠBdBŠBdB‚BTB‚BTBtBdBtBdBtB\瀀 Backgroundÿ     –€€®BÙ€€ÊÍ"Ò2Ö€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×׈€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯@@vigor-0.016.orig/vigor/vigor_ent_0001.xcf0100644000076400007640000004012307103707230016551 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿ‚ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿBB™¼path 0 BtB\B‚BPB‚BPBŠB\BŠB\BŠBdBŠBdB‚BTB‚BTBtBdBtBdBtB\Ø€€ Background#2ÿ     ??™t€€ŒŒ€€¨Š ¶ü:6 4 2ú111/102ü2 4 7;ü…³ÿ=þÿ}þÿ=ÿ>ÿ=ÿ$#ÿ&ÿ)ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿ ÿÿ ÿÿþÿÿ ÿÿÿ ÿÿÿ ÿÿ ÿ ÿÿ ÿÿÿ ÿÿÿ ÿÿÿ ÿÿÿ ÿÿÿ þÿÿÿ @#ÿ&ÿ)ÿ8ÿ9ÿ:ÿ;ÿþÿ'ÿÿ ÿ ÿ ÿÿ ÿþÿ*ÿ;ÿ<ÿ<ÿ<ÿ<ÿ<ÿ<ÿ<ÿ<ÿ<ÿ<ÿ uú8ý5ý 3 2 0ü///.//0ü02 2 7ý8ú D ÿÿ þÿÿÿ ÿÿÿÿÿÿ ÿÿÿ ÿÿÿ ÿÿÿ ÿ ÿÿÿ ÿÿÿ ÿÿÿ ÿÿÿ ÿÿ ÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)ÿ&ÿ#ÿ3ÿ<ÿ<ÿ=þÿ}þÿ=ÿK@þ}þ >-ÿ;ÿ<ÿ;ÿ;ÿ:ÿ:ÿ:ÿ:ÿ9ÿþÿ$ÿþÿ"ÿÿ ÿ)ÿ&ÿ#ÿÿ=þÿþÿ ÿÿ @@€€ Backgroundÿ     ˜?€€W@G€€sÇ …0§þþ4Ãüþþþþþ þ÷ùéöþþüû þù ûüþûòü÷üôþ þøþüøïûùþñüüüþûþòú÷ûïþþüü þþõüþüúööûûùüûþþþþîüùþþþúþþþúúþþþùôûüúþþþþ÷þüûøþþþþþ÷ôþüùþþüøþþþúþôþåõþþüöûúþüúöóüüüüþèúþüùúèþ÷üþþüïþüþúþäñüþùîþþþúþþþüõ÷üþüþíöüþøþþùõþþüùüòïùøúïøüþüþàùíöüóùþþõüîþþúúâôþôùíþóþüÞþþâóþþüþòúëþÏþù ÛùâêúþÝöúÐûûä÷þóüãþ÷þþüØñÞóûüÜôüüàüõüüïàüîóïþüÆëÝüÇÞøõüãþîÅüþßîÝóùüØùùû þþîBþ?óþ*þøþ#þþþþüþûûþøþþûûþþ!þþûþ þþ þþþþûûû û þþþþ þûþûþþ&þþþ ûþþþûþþþ þ þûû þûûøþþ þûþûþ þþþû þþ ùûûþþþþûþþþùûûþ(üþþøþþùûþû þþþþþ þþ ùøþþûþþ þþþþþþùþûþþþûþ þþþüþþøþöþûþþùþûûðþ û þþþþþþþþüþïûþþþþþþþþûþþþþþþûþþþþ÷üüþþþþþûûûûþòþüþ þþþøþþþþþþûúüþþþûþþþó þþþùþþþ ûþ úþþþûûþþþúüü þþþþüþþöûûúüú þ ûþþþþ÷òþõùûþþþûëþüúþþþþòüüúóþ üüþþþþ üúûñþþñüþûþþþüþðþû óþþþ þþøþþþúùþû ðþüþûûûþþþøþüûþüüþþüüüþþüþõþûûþþþ÷ üþþûþþùþöþüûûþâóþ˺û—ùÓæÈ»ÀÕõúÀÈüùŽùÐÀòÖöÐþ€¼Æ»€¿Ã€?ýüüúþ þ ûüüøþ÷÷õüúüû þöøþøöòüþúþùþþþüþþøïôõþúþþ ûüþþøþþùôüúþôþõþûôþþùæþþüüõþþþþúþüûðòþüûþöõþüþùþþûöõþüþþùöþüüúþþôûþúþüþþûùøþüõîëú þëûþ÷öþöûûü÷ þàüþõþéúþüþþïøûùüúþßüþþúíøüôþþþþóøüûþûôòùüþûþäú÷×þüüþûëþþüöþ÷üéþþüþ÷üøû÷üþþÜþüüþþàþüüùðêúþþüùèü÷þÚüþþñâþüüúØüüñîõúüÏþòçûøôåûüþèßþñéþûþâþàïêøÎôçüðþþüòõúëßóûëÜüÑþüàèþÑÐþüüøÖûø§íïÜÊþ¥Öí@@vigor-0.016.orig/vigor/cp.xcf0100664000076400007640000020313107103707231014522 0ustar cjw44cjw44gimp xcf file€€BBcE1€€ Crud Puppyÿ      €€"E%€€>™#~2"ýýf™9ý™3<þf=ûf3f8û3Ì33û™f™ÌûÌ3*þ3úÌf3þ3.þÌþÌþ™üÌÌ'þ3þ3ü™Ìþ3'þÌþ3üÌfüf3'ûÌ™ù333þ™&ò3™f3™3Ìþ™(þÌþ™û3fþÌ$öf3f™f÷3™f™™&þ3þfþÌþÌ0þ3þÌú™33þÌ&þÌþÌýÿ3*þfû3Ì0þ™øf3™36÷Ì3™Ìf+ü3™ù™™™þ31ù3™™Ìþ3þ™ü™35™þ™ ýfÿ,þ™ûÌfÿþ™þ3 þfþÌÿ(ö3fÌ™™þ™ÿÿþ™$þ™þ3þÌþfÿ!÷™f™3þ3ÿþfý™3þÌþ™ ÿþÌû3Ìÿý™3þ™ û™f3fÿ#ý3Ìþ™ þ™ÿÿ"þ™þÌ ÿþÌ þÌûÌfþ3ÿ"þfþ™ûffþ™ÿÿþ3þfþ™ÿþ3þfü3Ìþfÿ þfþ3 ÿýÌ™ þÌþ™ÿúÌ3f ýf3ÿü™™þ™ýÌ3ýÌ3ÿþfþ™ þfþ™5þ™ü3Ìþ™þÌþfþÌþ3ýf™ý™fþ3 þÿ'ûÌÌþf ÿ*þfÿþÌ'þÌþ3ÿþÌþÌû33ÿ$þ3þÌÿþ3$ù3f™þfÿýÌ3ûÌfúÌÌ™ý3™þfÿÿþfþ™û3™þÌÿý™fþ3ÿþÿÿý™3þÌf ü™f3ÿÿþ™ú3ÌfÌý3fþ3ÿÌýýf™9ý™3<þf=ûf3f8û3Ì33û™f™ÌûÌ3*þ3úÌf3þ3.þÌþÌþ™üÌÌ'þ3þ3ü™Ìþ3'þÌþ3üÌfüf3'ûÌ™ù333þ™&ò3™f3™3Ìþ™(þÌþ™û3fþÌ$öf3f™f÷3™f™™&þ3þfþÌþÌ0þ3þÌú™33þÌ&þÌþÌýÿ3*þfû3Ì0þ™øf3™36÷Ì3™Ìf+ü3™ù™™™þ31ù3™™Ìþ3þ™ü™35™þ™ ýfÿ,þ™ûÌfÿþ™þ3 þfþÌÿ(ö3fÌ™™þ™ÿÿþ™$þ™þ3þÌþfÿ!÷™f™3þ3ÿþfý™3þÌþ™ ÿþÌû3Ìÿý™3þ™ û™f3fÿ#ý3Ìþ™ þ™ÿÿ"þ™þÌ ÿþÌ þÌûÌfþ3ÿ"þfþ™ûffþ™ÿÿþ3þfþ™ÿþ3þfü3Ìþfÿ þfþ3 ÿýÌ™ þÌþ™ÿúÌ3f ýf3ÿü™™þ™ýÌ3ýÌ3ÿþfþ™ þfþ™5þ™ü3Ìþ™þÌþfþÌþ3ýf™ý™fþ3 þÿ'ûÌÌþf ÿ*þfÿþÌ'þÌþ3ÿþÌþÌû33ÿ$þ3þÌÿþ3$ù3f™þfÿýÌ3ûÌfúÌÌ™ý3™þfÿÿþfþ™û3™þÌÿý™fþ3ÿþÿÿý™3þÌf ü™f3ÿÿþ™ú3ÌfÌý3fþ3ÿÌýýf™9ý™3<þf=ûf3f8û3Ì33û™f™ÌûÌ3*þ3úÌf3þ3.þÌþÌþ™üÌÌ'þ3þ3ü™Ìþ3'þÌþ3üÌfüf3'ûÌ™ù333þ™&ò3™f3™3Ìþ™(þÌþ™û3fþÌ$öf3f™f÷3™f™™&þ3þfþÌþÌ0þ3þÌú™33þÌ&þÌþÌýÿ3*þfû3Ì0þ™øf3™36÷Ì3™Ìf+ü3™ù™™™þ31ù3™™Ìþ3þ™ü™35™þ™ ýfÿ,þ™ûÌfÿþ™þ3 þfþÌÿ(ö3fÌ™™þ™ÿÿþ™$þ™þ3þÌþfÿ!÷™f™3þ3ÿþfý™3þÌþ™ ÿþÌû3Ìÿý™3þ™ û™f3fÿ#ý3Ìþ™ þ™ÿÿ"þ™þÌ ÿþÌ þÌûÌfþ3ÿ"þfþ™ûffþ™ÿÿþ3þfþ™ÿþ3þfü3Ìþfÿ þfþ3 ÿýÌ™ þÌþ™ÿúÌ3f ýf3ÿü™™þ™ýÌ3ýÌ3ÿþfþ™ þfþ™5þ™ü3Ìþ™þÌþfþÌþ3ýf™ý™fþ3 þÿ'ûÌÌþf ÿ*þfÿþÌ'þÌþ3ÿþÌþÌû33ÿ$þ3þÌÿþ3$ù3f™þfÿýÌ3ûÌfúÌÌ™ý3™þfÿÿþfþ™û3™þÌÿý™fþ3ÿþÿÿý™3þÌf ü™f3ÿÿþ™ú3ÌfÌý3fþ3ÿÌüÿ9ÿÿ9úÿÿÿ8ÿüÿÿ8ÿ/ÿÿýÿ*ÿÿøÿÿÿÿ(ÿÿûÿÿÿÿþÿÿþÿÿ(ÿþÿÿÿ'ÿÿÿþÿÿüÿÿÿ'ÿÿÿöÿÿÿÿÿ%ÿþÿÿþÿÿöÿÿÿÿÿÿÿ&ÿþÿÿþÿÿûÿÿ$ÿÿþÿÿýÿ$ÿÿþÿÿþÿÿ'ÿýÿÿÿýÿ$ýÿÿÿ$ÿÿ$ÿÿ#ÿÿþÿÿ"ÿÿþÿÿ"ÿÿþÿ ÿÿþÿÿ!ÿþÿÿþÿÿ#ÿÿþÿÿþÿÿþÿÿ!ÿÿþÿÿ ÿþÿÿüÿÿ ÿÿþÿÿþÿÿþÿÿÿÿÿÿþÿùÿÿÿÿÿÿþÿÿþÿÿÿüÿÿÿþÿÿþÿ ÿýÿÿÿÿÿÿþÿÿÿüÿÿÿþÿÿþÿÿ÷ÿÿÿÿÿÿÿüÿÿÿýÿÿÿÿÿÿÿýÿÿÿÿþÿÿÿ ÿÿÿ þÿÿþÿÿÿþÿÿ þÿÿþÿÿÿþÿÿþÿÿÿüÿÿÿþÿÿÿüÿÿÿúÿÿÿÿþÿÿÿþÿÿþÿÿÿþÿÿþÿùÿÿÿÿÿþÿ ÿÿÿúÿÿÿÿþÿÿÿÿøÿÿÿÿÿþÿÿÿîÿÿÿÿÿÿÿÿÿÿÿ ÿÿýÿÿÿÿÿýÿÿÿþÿÿûÿÿÿÿÌý™Ì(úÌf™þfø3™f3f&ü3Ì þÌþ™$™þ™$ù33™ û™3Ì(û3™fþ™5ý™Ìü™ÌþfþÌ&þ3þ3þÌ)ú™Ì™þf0ý3Ìþ3þ3'þ3þ™þ™þÌþ3þf$þfü™3Ì þ™'þ™þ™þ3þ31ø™Ìff<þ3ô™™333þ3þføÌff3ûÌ™5þÌø33™ýfÌù3Ìf3þ3þÌþf#ú3f3ú33fü™™þ3þf3þ3ûÌ™.þf@þ3üÌ3ûÌf*þfüf™þ™þ™,ø3ff63þ™þ™.þÿ þfý™3þ3ý™Ìüfÿ™ü33üf3þÌ"ÿþ™0ÿþ3ü3fþ™þf þÌÿÿü™™ þÌþf þ™ÿÿÌûf3þfþ™ÿÿ™þf þ™þÌþ3ÿÿþ3þfþ™ÿý3ÿÿþ™þ3ú™3Ì# ÿþÌþÌû3fþ™ þ™ ÿ û3f þ3 ÿþÌ÷3™™™fþ3ü™ÿÿÿúÌ™3ü3Ìýfÿÿþfü™™þ3ý™ÿÿþ™þ3ÿþÌü3ÿþf þÿÿüÿÌþ3þfþ3ÿÿ™þfþÌÿÿüfÌþf þ™ÿþÌ ù™f3'þfþÿþÌûf™™.þÿ ý3f.ÿþ3ûÌ3-ü3ÿÿþ3ó33ff3f%ÿþ3üÌ3*ÿþ3û™™+þfÿÿþ™þfþÌ&ÿþ3™û™ÌþÌ!ÿ6þ™ÿÿýf3þf÷™3ffÌÿþ™ÿÿýf û3Ì ÿýÿf þf ÿûfÿÌÿûÌfþ3ÿfúÿÿ3ÿÿþ3þfû™3ÿfÿÿúÿfÌÿÿûfÌû3™Ìý™Ì(úÌf™þfø3™f3f&ü3Ì þÌþ™$™þ™$ù33™ û™3Ì(û3™fþ™5ý™Ìü™ÌþfþÌ&þ3þ3þÌ)ú™Ì™þf0ý3Ìþ3þ3'þ3þ™þ™þÌþ3þf$þfü™3Ì þ™'þ™þ™þ3þ31ø™Ìff<þ3ô™™333þ3þføÌff3ûÌ™5þÌø33™ýfÌù3Ìf3þ3þÌþf#ú3f3ú33fü™™þ3þf3þ3ûÌ™.þf@þ3üÌ3ûÌf*þfüf™þ™þ™,ø3ff63þ™þ™.þÿ þfý™3þ3ý™Ìüfÿ™ü33üf3þÌ"ÿþ™0ÿþ3ü3fþ™þf þÌÿÿü™™ þÌþf þ™ÿÿÌûf3þfþ™ÿÿ™þf þ™þÌþ3ÿÿþ3þfþ™ÿý3ÿÿþ™þ3ú™3Ì# ÿþÌþÌû3fþ™ þ™ ÿ û3f þ3 ÿþÌ÷3™™™fþ3ü™ÿÿÿúÌ™3ü3Ìýfÿÿþfü™™þ3ý™ÿÿþ™þ3ÿþÌü3ÿþf þÿÿüÿÌþ3þfþ3ÿÿ™þfþÌÿÿüfÌþf þ™ÿþÌ ù™f3'þfþÿþÌûf™™.þÿ ý3f.ÿþ3ûÌ3-ü3ÿÿþ3ó33ff3f%ÿþ3üÌ3*ÿþ3û™™+þfÿÿþ™þfþÌ&ÿþ3™û™ÌþÌ!ÿ6þ™ÿÿýf3þf÷™3ffÌÿþ™ÿÿýf û3Ì ÿýÿf þf ÿûfÿÌÿûÌfþ3ÿfúÿÿ3ÿÿþ3þfû™3ÿfÿÿúÿfÌÿÿûfÌû3™Ìý™Ì(úÌf™þfø3™f3f&ü3Ì þÌþ™$™þ™$ù33™ û™3Ì(û3™fþ™5ý™Ìü™ÌþfþÌ&þ3þ3þÌ)ú™Ì™þf0ý3Ìþ3þ3'þ3þ™þ™þÌþ3þf$þfü™3Ì þ™'þ™þ™þ3þ31ø™Ìff<þ3ô™™333þ3þføÌff3ûÌ™5þÌø33™ýfÌù3Ìf3þ3þÌþf#ú3f3ú33fü™™þ3þf3þ3ûÌ™.þf@þ3üÌ3ûÌf*þfüf™þ™þ™,ø3ff63þ™þ™.þÿ þfý™3þ3ý™Ìüfÿ™ü33üf3þÌ"ÿþ™0ÿþ3ü3fþ™þf þÌÿÿü™™ þÌþf þ™ÿÿÌûf3þfþ™ÿÿ™þf þ™þÌþ3ÿÿþ3þfþ™ÿý3ÿÿþ™þ3ú™3Ì# ÿþÌþÌû3fþ™ þ™ ÿ û3f þ3 ÿþÌ÷3™™™fþ3ü™ÿÿÿúÌ™3ü3Ìýfÿÿþfü™™þ3ý™ÿÿþ™þ3ÿþÌü3ÿþf þÿÿüÿÌþ3þfþ3ÿÿ™þfþÌÿÿüfÌþf þ™ÿþÌ ù™f3'þfþÿþÌûf™™.þÿ ý3f.ÿþ3ûÌ3-ü3ÿÿþ3ó33ff3f%ÿþ3üÌ3*ÿþ3û™™+þfÿÿþ™þfþÌ&ÿþ3™û™ÌþÌ!ÿ6þ™ÿÿýf3þf÷™3ffÌÿþ™ÿÿýf û3Ì ÿýÿf þf ÿûfÿÌÿûÌfþ3ÿfúÿÿ3ÿÿþ3þfû™3ÿfÿÿúÿfÌÿÿûfÌû3™ÿ)ÿ ÿ%ÿþÿÿÿÿ$ÿÿÿ ÿ$ýÿÿÿýÿÿÿþÿ%ÿÿÿþÿ$ÿüÿÿÿÿüÿÿ$þÿÿÿÿ$üÿÿÿþÿÿþÿÿ&ÿ÷ÿÿÿÿ ÿ&ÿþÿÿþÿÿþÿÿÿ$ÿþÿÿþÿÿÿ#ÿûÿÿÿ#ÿûÿÿÿ!ÿüÿÿÿÿÿÿýÿÿÿüÿÿ$ÿÿÿþÿÿÿÿþÿÿøÿÿÿÿÿÿÿÿþÿÿÿÿþÿÿùÿÿÿÿÿóÿÿÿÿÿÿÿþÿ ÿýÿþÿÿüÿÿÿþÿÿþÿÿøÿÿÿÿÿ ÿþÿÿþÿÿÿÿÿþÿÿþÿÿùÿÿÿÿüÿÿÿþÿÿþÿÿÿÿÿÿÿýÿÿÿþÿÿÿÿþÿÿÿþÿÿÿÿÿþÿþÿ#ÿýÿþÿÿþÿÿÿøÿÿÿÿÿþÿÿýÿÿÿÿþÿÿýÿÿÿþÿÿûÿÿÿÿÿÿþÿÿÿþÿÿþÿÿþÿÿÿþÿÿÿüÿÿþÿÿþÿÿÿÿþÿÿÿÿÿÿ÷ÿÿÿÿÿÿþÿÿþÿÿþÿþÿÿþÿÿÿÿÿÿÿÿûÿÿÿÿÿýÿÿÿÿþÿÿÿÿÿÿÿ"þ™ þÌÿþ™þ3þ3ýf™þÌÿÿý3ÿþf 3ô3™™3fÿüÌÿüÌ3þfü3™ûÿÿÿ(þfû3™þ™ÿÿþÌþÌ þ™ÿýfÌ™ù3™3þfÿþÌûfÌ3÷™33fý™ÿ/þ3=ùÌ33*þfúff3ýÌ3)þ3þ3þ3þfþf2üÌ3üff2ûff5þ3þ3)ûÌ3þfþ™&û3f34fû™fþfþ4þ3þ-)þÌþf=÷™3f3%þ™û33™þ3ý3Õ+þÌûÌ3ýB¢ýf™ ýÌ3<þfþfþ™ûÕÕÕ(þ3üÌfþÌÕûÕÕ™'þÌþf™øÕ¢ÕÕ„*ù™f™™ø`Õu-Õ3™2þ3Õúu-Õ33/úÌ3fÕû-BÕ¢1þfý™BÕÕûÕÕ6þuÕÕþu9Õý¨B3þ3ÕÕûuÕÕ33þ`ÕÕþB3 Õþ`1ý3ÆÕÕþ¢0ý™¨Õ Õ1þ¢Õ Õ0Õ/Õ,ýÌ3ÕÕ+þ3ÕÕ*ýf·ÕÕ¢ÕþÕÕ+ÕþÕÕü`™BÕÕ!þÌýÌfþ¢ÕÕþÕÕþÕÕù3fÕÕ þfþùÕÕþ¢ÕÕþfÕÕýBêÕþ™ø#ÕÕþÕÕý3ÕÕÕ™ ÕþÕÕÕý¨™Õðff3™ÕÕÕÕü¢ÕÕ÷BÕ“ÿ™ó3üÌ#ö#--™3ÕÕþ“ÕÕ$þfþ Õþ`þÌ&þþ™ýÕÆÕÕø`3&ýþ#ÕúÌ#(îB#3f3¼à“ÕÕ`û#33'ý3þ3ýV3þf330þfÍ"þ™ þÌÿþ™þ3þ3ýf™þÌÿÿý3ÿþf 3ô3™™3fÿüÌÿüÌ3þfü3™ûÿÿÿ(þfû3™þ™ÿÿþÌþÌ þ™ÿýfÌ™ù3™3þfÿþÌûfÌ3÷™33fý™ÿ/þ3=ùÌ33*þfúff3ýÌ3)þ3þ3þ3þfþf2üÌ3üff2ûff5þ3þ3)ûÌ3þfþ™&û3f34fû™fþfþ4þ3þ-)þÌþf=÷™3f3%þ™û33™þ3ý3Õ+þÌûÌ3ýB¢ýf™ ýÌ3<þfþfþ™ûÕÕÕ(þ3üÌfþÌÕûÕÕ™'þÌþf™øÕ¢ÕÕ„*ù™f™™ø`Õu-Õ3™2þ3Õúu-Õ33/úÌ3fÕû-BÕ¢1þfý™BÕÕûÕÕ6þuÕÕþu9Õý¨B3þ3ÕÕûuÕÕ33þ`ÕÕþB3 Õþ`1ý3ÆÕÕþ¢0ý™¨Õ Õ1þ¢Õ Õ0Õ/Õ,ýÌ3ÕÕ+þ3ÕÕ*ýf·ÕÕ¢ÕþÕÕ+ÕþÕÕü`™BÕÕ!þÌýÌfþ¢ÕÕþÕÕþÕÕù3fÕÕ þfþùÕÕþ¢ÕÕþfÕÕýBêÕþ™ø#ÕÕþÕÕý3ÕÕÕ™ ÕþÕÕÕý¨™Õðff3™ÕÕÕÕü¢ÕÕ÷BÕ“ÿ™ó3üÌ#ö#--™3ÕÕþ“ÕÕ$þfþ Õþ`þÌ&þþ™ýÕÆÕÕø`3&ýþ#ÕúÌ#(îB#3f3¼à“ÕÕ`û#33'ý3þ3ýV3þf330þfÍ"þ™ þÌÿþ™þ3þ3ýf™þÌÿÿý3ÿþf 3ô3™™3fÿüÌÿüÌ3þfü3™ûÿÿÿ(þfû3™þ™ÿÿþÌþÌ þ™ÿýfÌ™ù3™3þfÿþÌûfÌ3÷™33fý™ÿ/þ3=ùÌ33*þfúff3ýÌ3)þ3þ3þ3þfþf2üÌ3üff2ûff5þ3þ3)ûÌ3þfþ™&û3f34fû™fþfþ4þ3þ-)þÌþf=÷™3f3%þ™û33™þ3ý3Õ+þÌûÌ3ýB¢ýf™ ýÌ3<þfþfþ™ûÕÕÕ(þ3üÌfþÌÕûÕÕ™'þÌþf™øÕ¢ÕÕ„*ù™f™™ø`Õu-Õ3™2þ3Õúu-Õ33/úÌ3fÕû-BÕ¢1þfý™BÕÕûÕÕ6þuÕÕþu9Õý¨B3þ3ÕÕûuÕÕ33þ`ÕÕþB3 Õþ`1ý3ÆÕÕþ¢0ý™¨Õ Õ1þ¢Õ Õ0Õ/Õ,ýÌ3ÕÕ+þ3ÕÕ*ýf·ÕÕ¢ÕþÕÕ+ÕþÕÕü`™BÕÕ!þÌýÌfþ¢ÕÕþÕÕþÕÕù3fÕÕ þfþùÕÕþ¢ÕÕþfÕÕýBêÕþ™ø#ÕÕþÕÕý3ÕÕÕ™ ÕþÕÕÕý¨™Õðff3™ÕÕÕÕü¢ÕÕ÷BÕ“ÿ™ó3üÌ#ö#--™3ÕÕþ“ÕÕ$þfþ Õþ`þÌ&þþ™ýÕÆÕÕø`3&ýþ#ÕúÌ#(îB#3f3¼à“ÕÕ`û#33'ý3þ3ýV3þf330þfÍÿÿþÿÿûÿÿÿ þÿ ÿÿÿþÿ ÿÿþÿÿ ÿÿÿ!ÿÿþÿÿÿþÿÿÿÿþÿ ÿÿÿþÿÿþÿÿþÿÿÿùÿÿÿÿ ÿÿüÿÿÿùÿÿÿÿ ÿ ÿÿþÿ ÿþÿÿþÿÿÿ%þÿÿúÿÿÿ ÿ%þÿÿüÿÿ ÿ%ÿÿÿ ÿ&ÿÿÿ&ÿþÿÿ ÿÿþÿÿÿ)ÿûÿÿÿÿÿ%þÿÿþÿÿ ÿ%þÿÿ#ûÿÿÿÿþÿÿÿ&ÿþÿÿÿþÿÿÿ ÿÿ&þÿÿ'ÿÿþÿÿúÿÿÿ ÿ+ÿþÿÿúÿÿÿÿ/ÿÿ0ÿ ÿ!þÿ ÿ6ÿ5 ÿ4 ÿ4 ÿ3 ÿ2 ÿ1 ÿ0ÿ/ÿ.ÿ,ÿ+ÿ*ÿ*ÿ!þÿÿþÿÿÿ!ÿÿ ÿþÿ ÿþÿÿ ÿþÿÿÿÿ ÿÿþÿ ÿÿ%ÿ ÿþÿÿ&ÿ ÿ'ÿÿ(ÿÿÿÿ0ÿ þÿ¿þÿÿü™ÿÿÿûÌÿÿ™û3™þføÿÌfÿÌÿÿþÌý3™ÿüÿÿÿþ™ÿüÌ3™ÿÿþf.ÿþÿÿþ™ ûÌÌ ÿ þÌþ3þ3 ÿ þfüÌ3ÿþ™ÿ þ3ùfÌ3 þf&þ39þfþ3þfþÌ,ø™3™32þfý™f6û™3þÌ:þ™ûÌf5þfþ3(þf9þ3þfý™3 þfþ™þ™ýf3þÌ ü™™þ3þ3"þfü™B þ3*þ™ü3Õ/þf þ¨ú™3Ìþfþ™þ3 üÌ3þÌ ÷™™™ÌúoÕuþf#þf ú¨ÕÕ þÌ,ûuÕÕÕþ™ ìÌ3™33G“ÕÕÕü33þfþ3þ3þ™üu“ÕÕýf'þ™ û3ÕÕû¢™&ù™f™û¢ÕÕÕ,3ýføêÕfÕB¢ÕÕþ3,ö™™3àóÕÕþuþÕ%þ™üÌfþêÕÕ5 Õ'þf Õ2þàÕ Õ1þêÕ ÕþÆ(þÌ Õþ¨.þ3Õ ÕþÆ.Õ$üÌ™3Õþóþþ™þ#Õþ“ÕÕþÕþ3ú™ÌÕ ÕþuÕÕþÕÕýÕý# Õý¢ÕÕýóÕÕÕþ™ø™#fÕ Õý¢ÕÕùóÕÕ™Õþ™ý3ïÕý`ÕÕýuBÕÕûÕÕuÕüfóÕÕû¼fÕÕý¨“ÕÕþÕÕý¢™ÕþfûfÿÕÕÕÕþÕÕ÷Õ`Ì™ÿÿþÕÕþÕÕúBÕÕÕÕþ3þÕþÿý™ÕÕ3ýQuÕÕø`BÕÕB¢Õöf™3Õ3“ÕÕü¢Qþ3ü™uÕÕþ3ÕÕû¨3ö¼#fÕ3ÕÕû3#3þ™ÕÕþÕÕú™Ì¢ÕÕú3fþÌÕú-ÕÕ¢™ûÌ3Bõ™™B3ÌÕþÕÕ'þfþ™Õú“¢“Qþþ™þ#þ#ý3uÕÕü¨3fø####þ3þ#þõfÆÕfBÕfþ#þ™ø3™3™þ3ü™Õþïþü3™™ ü™fþ#ý™f*ùÌ## þ+òÌff¼à™ÌÌþÿÿü™ÿÿÿûÌÿÿ™û3™þføÿÌfÿÌÿÿþÌý3™ÿüÿÿÿþ™ÿüÌ3™ÿÿþf.ÿþÿÿþ™ ûÌÌ ÿ þÌþ3þ3 ÿ þfüÌ3ÿþ™ÿ þ3ùfÌ3 þf&þ39þfþ3þfþÌ,ø™3™32þfý™f6û™3þÌ:þ™ûÌf5þfþ3(þf9þ3þfý™3 þfþ™þ™ýf3þÌ ü™™þ3þ3"þfü™B þ3*þ™ü3Õ/þf þ¨ú™3Ìþfþ™þ3 üÌ3þÌ ÷™™™ÌúoÕuþf#þf ú¨ÕÕ þÌ,ûuÕÕÕþ™ ìÌ3™33G“ÕÕÕü33þfþ3þ3þ™üu“ÕÕýf'þ™ û3ÕÕû¢™&ù™f™û¢ÕÕÕ,3ýføêÕfÕB¢ÕÕþ3,ö™™3àóÕÕþuþÕ%þ™üÌfþêÕÕ5 Õ'þf Õ2þàÕ Õ1þêÕ ÕþÆ(þÌ Õþ¨.þ3Õ ÕþÆ.Õ$üÌ™3Õþóþþ™þ#Õþ“ÕÕþÕþ3ú™ÌÕ ÕþuÕÕþÕÕýÕý# Õý¢ÕÕýóÕÕÕþ™ø™#fÕ Õý¢ÕÕùóÕÕ™Õþ™ý3ïÕý`ÕÕýuBÕÕûÕÕuÕüfóÕÕû¼fÕÕý¨“ÕÕþÕÕý¢™ÕþfûfÿÕÕÕÕþÕÕ÷Õ`Ì™ÿÿþÕÕþÕÕúBÕÕÕÕþ3þÕþÿý™ÕÕ3ýQuÕÕø`BÕÕB¢Õöf™3Õ3“ÕÕü¢Qþ3ü™uÕÕþ3ÕÕû¨3ö¼#fÕ3ÕÕû3#3þ™ÕÕþÕÕú™Ì¢ÕÕú3fþÌÕú-ÕÕ¢™ûÌ3Bõ™™B3ÌÕþÕÕ'þfþ™Õú“¢“Qþþ™þ#þ#ý3uÕÕü¨3fø####þ3þ#þõfÆÕfBÕfþ#þ™ø3™3™þ3ü™Õþïþü3™™ ü™fþ#ý™f*ùÌ## þ+òÌff¼à™ÌÌþÿÿü™ÿÿÿûÌÿÿ™û3™þføÿÌfÿÌÿÿþÌý3™ÿüÿÿÿþ™ÿüÌ3™ÿÿþf.ÿþÿÿþ™ ûÌÌ ÿ þÌþ3þ3 ÿ þfüÌ3ÿþ™ÿ þ3ùfÌ3 þf&þ39þfþ3þfþÌ,ø™3™32þfý™f6û™3þÌ:þ™ûÌf5þfþ3(þf9þ3þfý™3 þfþ™þ™ýf3þÌ ü™™þ3þ3"þfü™B þ3*þ™ü3Õ/þf þ¨ú™3Ìþfþ™þ3 üÌ3þÌ ÷™™™ÌúoÕuþf#þf ú¨ÕÕ þÌ,ûuÕÕÕþ™ ìÌ3™33G“ÕÕÕü33þfþ3þ3þ™üu“ÕÕýf'þ™ û3ÕÕû¢™&ù™f™û¢ÕÕÕ,3ýføêÕfÕB¢ÕÕþ3,ö™™3àóÕÕþuþÕ%þ™üÌfþêÕÕ5 Õ'þf Õ2þàÕ Õ1þêÕ ÕþÆ(þÌ Õþ¨.þ3Õ ÕþÆ.Õ$üÌ™3Õþóþþ™þ#Õþ“ÕÕþÕþ3ú™ÌÕ ÕþuÕÕþÕÕýÕý# Õý¢ÕÕýóÕÕÕþ™ø™#fÕ Õý¢ÕÕùóÕÕ™Õþ™ý3ïÕý`ÕÕýuBÕÕûÕÕuÕüfóÕÕû¼fÕÕý¨“ÕÕþÕÕý¢™ÕþfûfÿÕÕÕÕþÕÕ÷Õ`Ì™ÿÿþÕÕþÕÕúBÕÕÕÕþ3þÕþÿý™ÕÕ3ýQuÕÕø`BÕÕB¢Õöf™3Õ3“ÕÕü¢Qþ3ü™uÕÕþ3ÕÕû¨3ö¼#fÕ3ÕÕû3#3þ™ÕÕþÕÕú™Ì¢ÕÕú3fþÌÕú-ÕÕ¢™ûÌ3Bõ™™B3ÌÕþÕÕ'þfþ™Õú“¢“Qþþ™þ#þ#ý3uÕÕü¨3fø####þ3þ#þõfÆÕfBÕfþ#þ™ø3™3™þ3ü™Õþïþü3™™ ü™fþ#ý™f*ùÌ## þ+òÌff¼à™ÌÌÿþÿÿÿÿþÿÿüÿÿÿþÿÿþÿ!ÿ ÿ!ÿÿþÿÿüÿÿ þÿ ÿÿÿÿÿþÿþÿÿþÿÿÿÿþÿÿÿúÿÿÿÿüÿÿÿþÿÿýÿÿûÿÿÿ ÿþÿÿþÿÿþÿÿþÿÿüÿÿ ÿþÿ ÿÿ þÿÿþÿÿþÿ ÿüÿÿÿ þÿÿþÿÿþÿÿûÿÿÿÿþÿÿþÿÿþÿ ÿõÿÿÿÿÿÿÿþÿÿýÿÿ ÿþÿÿÿÿþÿÿýÿÿ ÿûÿÿÿþÿÿøÿÿÿÿÿ ÿÿÿÿÿýÿÿ ÿÿ!ÿÿýÿÿ ÿþÿ ÿÿýÿÿÿ þÿÿÿÿþÿ ÿÿ ÿÿùÿÿÿ ÿ%þÿÿýÿ ÿ)ÿ ÿ&ûÿÿÿþÿ ÿ1ÿ0ÿ(þÿÿ.ÿþÿ ÿþÿÿÿþÿÿÿÿÿÿÿþÿÿÿÿþÿÿÿÿÿÿ ÿþÿÿÿ ÿÿÿÿþÿ ÿÿÿþÿÿþÿ ÿÿýÿÿ ÿÿÿÿþÿÿÿÿÿÿÿ ÿÿÿÿþÿÿ ÿÿ ÿ ÿÿÿÿþÿÿ ÿ ÿ ÿÿÿþÿÿüÿÿüÿÿÿ ÿ ÿ+ÿ+ÿþÿÿ@@€€Whitesÿ     EÜ€€EôM€€Fv¦0Ö@€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÿÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ÿˆ€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ÿ°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯ÿ@@vigor-0.016.orig/vigor/vigor_rest.xcf0100644000076400007640000004566207103707230016315 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿªAAE=48$(&2PLN`dprtD02 XTV,(*€€BB†¼path 0 BtB\B‚BPB‚BPBŠB\BŠB\BŠBdBŠBdB‚BTB‚BTBtBdBtBdBtB\ï‡ ¼€€Eyesÿ     X˜€€°{€€Ì”Sk 0ÿ8ÿ4 ÿ2 ÿ1ÿ0ÿÿ/ÿÿ.ÿÿ.ÿÿ.ÿÿ.ÿÿ/ÿÿ0ÿ1 ÿ2 ÿ4ÿ ¯ÿ6 ÿ3 ÿ1ÿ/ÿ-ÿ%ÿÿ$ÿÿþÿÿþÿþÿÿüÿÿ%ÿ(ÿ)ÿ*ÿ*ÿ+ÿ,ÿ-ÿ/ÿ Lÿ8ÿ5 ÿ3 ÿ2ÿÿ1ÿÿ0ÿÿ0ÿÿ0ÿÿ0ÿÿ1ÿÿ2 ÿ3 ÿ5ÿ8ÿ. Ëÿ6 ÿ3 ÿ1ÿ/ÿ.ÿÿ!ÿÿøÿÿÿÿ!ÿþÿÿþÿ"ÿ*ÿ,ÿ,ÿ,ÿ-ÿ.ÿ/ÿ1 ÿ*/ÿË+ ÿ3 ÿ6ÿJ ÿ6ÿ®@@€€Clipÿ     (€€@ °€€\¤ì L<ÿ7ÿ4 ÿ2 ÿ0 ÿ3ÿ6ÿ7ÿ8ÿ8ÿ9ÿ9ÿ9ÿ:ÿ;ÿ:ÿ:ÿ;ÿ:ÿ:ÿ;ÿ;ÿ;ÿ;ÿ;ÿÿ'ÿ ÿ'ÿ ÿ'ÿ ÿ'ÿÿ*ÿÿ-ÿÿ/ÿÿ0ÿÿ1ÿÿ1ÿÿ2ÿÿ2ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ ÿ;ÿ7 ÿ4 ÿ6 ÿ8ÿ9ÿ:ÿ:ÿ:ÿ:ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ'ÿÿ'ÿ ÿ'ÿ ÿ' ÿ ÿ*ÿÿ-ÿÿ/ÿÿ0ÿÿ1ÿÿ1ÿÿ2ÿÿ2ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ''ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ4ÿÿ4ÿÿ;ÿ;ÿ<ÿ;ÿ;ÿ;ÿ;ÿ:ÿ;ÿ;ÿ:ÿ:ÿ9ÿ7ÿ9ÿ;ÿ@ ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ3ÿÿ4ÿÿ4ÿÿ;ÿ;ÿ:ÿ;ÿ:ÿ:ÿ:ÿ:ÿ9ÿ8ÿ8ÿ7ÿ5ÿ.ÿ/ ÿ1 ÿ3ÿ8@@€€ Backgroundÿ      c€€ {K¦€€ —š+Ÿ;£€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×׈€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯@@vigor-0.016.orig/vigor/vigor_ent_0002.xcf0100644000076400007640000005247107103707230016563 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿŒÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿBB¼path 0 BtB\B‚BPB‚BPBŠB\BŠB\BŠBdBŠBdB‚BTB‚BTBtBdBtBdBtB\ÍC¦¦ Background#2ÿ     ~¦¦š+7¦¦Ê©A¾ ¿MHó/ÿ;ÿ9ÿ6ÿ 3ÿ0ÿ-ÿ,ÿ,ÿ+ÿ+ÿ*ÿ*ÿ*ÿ)ÿ)ÿ(ÿ(ÿ'ÿ'ÿ'ÿ&ÿ&ÿ%ÿ%ÿ%ÿ$ÿ$ÿ#ÿ#ÿ"ÿ"ÿ"ÿ!ÿ!ÿ ÿ ÿ ÿÿÿÿ ÿ ÿ ÿ!ÿ!ÿ"ÿ"ÿ#ÿ#ÿ#ÿ$ÿ$ÿ%ÿ%ÿ%ÿ&ÿ&ÿ'ÿ'ÿ(ÿ(ÿ(ÿ)ÿ) õý9ón.}ºÿ¥~á1»Z.û=zåÿ ÿýä‚)úKÊäÿÿ*ýsÄÿÿûÞÿÿúÿÿ)ýJÔÿÿñëÌmE¦/kÌ~òÿÿ&ý^ÿÿü‘AühÉ&ýÅâÿÿûüÂ…4þIÿÿý75ýh¸ÿÿýÇ6þ4ÿÿþ@7þ•ÿÿý¶6ü ÷ÿÿþU7þ€ÿÿþß8þâÿÿýŠK7þXÿÿýô8þºÿÿþ’€ÿ=ÿ;ÿ9ÿ6ÿ 4ÿ 1ÿ/ÿ-ÿ*ÿ(ÿ%ÿ#ÿ ÿ ÿ"ÿ%ÿ'ÿ*ÿ,ÿ.ÿ1 ÿ3 ÿ6ÿ8ÿ:ÿ=ÿÎù{>ˆz6üD†òÿÿý¢A3ýÃÿÿþí2ýMñÿÿþûÿÿý·;0þ®ÿÿúºxpÒÿÿþ|& @þ!=üÿ«I ý`(ÿüÓq û{Òã²(ÿüûš8ûÜ€6 (ÿýÂaýR¿+ý?¡ÿÿüë‰(üˆè6,üyÚÿÿø²Pþo/ýP²ÿÿúÚx’Ç1ü(‰ëÿÿüêÿR3ýaìÿÿüÉh1þ'ÿ ÿüò..ý„¿ÿ ÿý¸W+ýýÿÿüá öWu9‚u~ÿÿý¨FøqËÿîÿÿþÿÿüÐo æÿ"ÿ ÿÿ ÿ ÿÿÿÿÿ ÿ ÿÿÿ!ÿ$þÿ–þÿ#þÿ"ÿ#ÿ#ÿ"ÿ"ÿ!ÿ!ÿ!ÿ ÿ ÿÿ €ÿ*ÿ*ÿ*ÿ+ÿ+ÿ,ÿ,ÿ-ÿ-ÿ-ÿ.ÿ.ÿ/ÿ/ÿ/ÿ0ÿ0 ÿ1 ÿ1 ÿ1 ÿ2 ÿ2 ÿ3 ÿ2þoÿ ÿ2þ*ÿ ÿ2þ‹ÿ ÿ1ýíÿ ÿ2þ[ÿ ÿ3þÎÿÿ3þ'ÿ ÿ3ý¾ÿÿ4þ×ÿÿ4ý®ÿÿ6þ˜ÿÿ7þ2ÿÿ8ÿ9ÿ9ÿ9ÿ:ÿ:ÿ;ÿ;ÿ;ÿ<ÿ<ÿ=ÿ=ÿ=þÿ=þÿþþÿ=ÿ;ÿ9ÿ6 ÿ4 ÿ1ÿ/ÿ-ÿ*ÿ( þ0ÿÿþ1üUþ‘ÿÿþ»üpÊÿýóÿÿþYûSÑÿÿû•ÿÿãþ[ÿÿ ú·ÿÿ³þ¼ÿÿþ÷þ-ÿÿþ0ýFëÿÿþ0þŽÿÿþ½þ§ÿÿþ¸úGôÿÿ\þÿÿýCúSÿÿñþÿÿþÍ!þ´ÿÿþ—þàÿÿþk ý‘ÿÿþ6þVÿÿýõ !þxÿÿþ·þ¸ÿÿþ”"þ”ÿÿþrýˆÿÿþ2"þ=ÿÿýº þ|ÿÿþ½"þƒÿÿýá1þÞÿÿþn"ýòÿÿþ|ùÇÿÿù #þÿÿýý þ¢ÿÿþt#ýNîÿÿþp ý ÜÿÿþH#ý åÿÿý² ú`ÿÿûz$þ_ÿÿýô ùÒÿÿ¼ #ý ÒÿÿþŸ þ*ÿÿû6x ÷‚äÿÿö’0 ýÂÿÿûê‰+ï"þ]ÿÿþ þˆÿÿ#ý Ñÿÿý§E þ;ÿÿ#üâÿÿþ` üŠóÿÿ&þŠÿÿýÁZ þÆÿÿ&ýIÍÿÿüäƒ!þ9ÿÿ(ýCðÿÿý«JþŠÿÿ(ý¸ÿÿüÔrý6ðÿÿ*ü.ñÿÿüüš9þNÿÿ,ügÉÿÿúÃaCçÿÿ/ý?¡ÿÿüë’þÿÿ1üxÚÿ ÿ4ýP±ÿÿ6ü'‰êÿÿ9ý`Âÿÿ;û8šûÿ<ýz;ü%rµ:ûúùª:üp¢4;ýÑC;ü½Ð<üqíE<ý6Àþ$ÿÿþ<úHÃÿÿî/þ†ÿÿþÆþ‚ÿÿþr.úþÿÿdúþÿÿ;.úJÿÿñúsÿÿü|.þ‚ÿÿþqþÕÿÿþw.ù ûÿÿ¸?þKÿÿþ/þŒÿÿúÉh{ÂÿÿþŸ0ýFÀÿÿþôÿÿý÷>1ý úÿÿý´3õI«ÿÿüÿÿø‚<6ù!‚€Gxm÷:P*Œ0¾g5ûµÿïÿÿüñ,2ý?ðÿÿþ¡2þ·ÿ ÿý¤0ÿþ×ÿÿýô/0ÿù×g5—ùÿÿþ|/ÿþrý |ÿÿþI/ÿýüù>îÿÿý„/ÿþ›þÇÿÿþ…/ÿþ<þ=ÿÿý€.ÿþÉþŸÿÿþÀ/ÿüìzþÿÿþ_/ÿû¢Ax¹ÿÿþé0ÿþûÿÿþ‡0ý™ýÿÿüþ@0þ&ÿÿýÄŠ3õ"„åÿëÿôÏÿ'7ù[JF0µþÓÿÿüù—5ÿüÆkÌÿÿý¿^ÿù÷¾±ÌuÙÿÿúbB¤ÿÿüè†%÷ÿ¨.qÿÿýÎü|Ýÿÿý¯Mþ£þÑÿÿþžýSµÿÿü×uþþCÿÿý¼Fü+Œîÿÿýž<ýÄÿÿüÐn üdÅÿÿüÆeýŠþÿÿüø–5ý;ÿÿüï,þ0ÿ ÿþûÿÿý¿]üuÖÿÿý¶Tý$Ãÿ ÿû¼|C¤ÿÿüç†$ýL®ÿÿüÞ| ýˆúÿÿüüÿü|Þÿÿý®Mü$…çÿÿý¥C û?ÿüÿÿü½~+ýTµÿÿü×uý]¾ÿÿþ| óv½ðÀ‚H©ÍmÅ7 ü+îÿÿý<ü4–øÿÿýÉXú1îÊ<þ üdÆÿÿüÆdü nÏÿÿþàý“ý<žÿÿüî+ýE§ÿÿþìüôxüu×ÿÿýµSþÿÿýˆÑýM®ÿÿüÝ|û0³ÿÿøCè^ü$†çÿÿþÇürÿÿö:v³ïšÿÌ !ý]¿ÿÿü÷‘ùô -»ëÿÿýæT#÷5—øÿúÿÿ)ü¸ÿ ÿýÞ?#ú ns2h ÿý|/ ÿþÇ/ ÿýí@.ÿý~-ÿþÔ.ÿþc-ÿýÑ,ÿþ«-ÿýÁ,ÿþç-ÿýÃ,ÿý©G*ÿüÑp'ÿüú˜6$þ ÿ ÿûêØjËÿÿýÀ_"þlÿ ÿùb A£ÿÿüé‡&ýÎþÿÿýÚcüzÜÿÿý°NùH—ÿõɪÿÿüï€ýR´ÿÿüØwö¹ÿÿ= ‚äÿÿý¨Gü*‹íÿÿýŸ=ý;ÿÿýZ»ÿÿüÑo ücÄÿÿüÇfý¤ýÿÿü1“ôÿÿüù—6ü:œþÿÿüðŽ- ü9³ÿÿ ü jÌÿÿýÀ^ütÕÿÿý·U ý¢üÿÿýÐH ýB£ÿÿüè‡%ýK­ÿÿóß}7F2Cn6²ÿÿýÂoü{Ýÿÿý¯Nü#„æÿÿ÷®ÿâíÿëÿüÿÿûüåýS´ÿÿüØvý\½ÿÿüÃr4ü*Œíÿÿýž=ü3•÷ÿ ÿúãÇKücÅÿÿüÇeñ mξ’ôð¸ÿÿåy<ü;þÿÿüïŽ,ø8.m$ütÖÿÿý¶T4ýL­ÿÿýÞ4ü#…æÿÿüïi6ý\¾ÿÿþr8ù4–ÔZ»:þWÿÿÿÿÿÿÿÿÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿÿÿÿÿÿÿÿÿÿîþ#ým "üÿ÷D!ûÿþ‹ ÿýÒ ÿþ_ úõÿÿå úžÿÿîNúôÿÿþ_ÿÿýòý1áÿÿþƒý ºÿÿþ=þrÿÿþ”þ·ÿÿþxþ6ÿÿý‘þ—ÿÿþ´ý ùÿÿþSûwÿÿÝ ú½ÿÿËþ3ÿÿþ-þ•ÿÿþ·þöÿÿþUÿþß ÿþ~ ÿþ üÿç¦!üÿ1!þ»#þZhÿ%ÿ#ÿ! ÿ"ÿ%ÿ'ÿ*ÿ,ÿ.ÿ1ÿ 3ÿ 6ÿ8ÿ:ÿ=ÿ€ÿ €ÿþÿ=ÿ:ÿ8ÿ6 ÿ2ÿ0ÿ,ÿ*ÿ&ÿ$ÿ"ÿ"ÿ%ÿ(ÿ*ÿ-ÿ0ÿ3ÿ 6ÿ9ÿ;ÿ ÿ € ÿ ÿ ÿ!ÿ!ÿ"ÿ"ÿ"ÿ#ÿ#ÿþÿ#ÿþÿÿ¤SS))€€ Backgroundÿ     ꀀU-€€%!5&E*€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×׈€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯@@vigor-0.016.orig/vigor/vigor_ent_0003.xcf0100644000076400007640000005324307103707230016562 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿ‚ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿBB•¼path 0 BtB\B‚BPB‚BPBŠB\BŠB\BŠBdBŠBdB‚BTB‚BTBtBdBtBdBtB\í´´ Background#2ÿ     •t´´•¡´´ÀÎ?ÑíýnV¿ÿþÿ<ÿ<ÿ;ÿ:ÿ9ÿ8ÿ7ÿ6ÿ5ÿ 4ÿ 3ÿ 2ÿ 1ÿ 0ÿ/ÿ.ÿ-ÿ,ÿ+ÿ*ÿ)ÿ(ÿ'ÿ&ÿ%ÿ$ÿ#ÿ"ÿ!ÿ ÿÿÿ ÿ!ÿ"ÿ#ÿ$ÿ% ½ü}:ûʲÿ8üZJÊÿÿ8üaÿûÿÿ6ýOaÿÿþº4þ«ÿÿýk„4þ«ÿÿþ_5þ«ÿÿüÉ’_5þ«ÿÿýÉ6þ«ÿÿýÉ6ýØÿÿýÉ7þaÿÿýÉ7þaÿÿýÖ7þ2ÿÿýó7ýåÿÿþ_7ýÊÿÿþ_8þ‹ÿÿþ­9þ€ÿÿþª ÿ<ÿ:ÿ8ÿ6ÿ 4ÿ 2ÿ 0ÿ.ÿ,ÿ*ÿ(ÿ&ÿ$ÿ"ÿ ÿÿ!ÿ#ÿ%ÿ'ÿ)ÿ+ÿ-ÿ/ÿ1 ÿ3 ÿ4 ÿ5 ÿ6ÿ7ÿ8ÿ9ÿ:ÿ;ÿ<ÿ=ÿ>þÿ¿ Aö-#F>=F$,4ñléñÿÿíÿÿñçl|‹0þþÿÿùþÿÿÈ1. ÿüåÿ_-ôÿøÿßèÿèßÿùÝÿÿý—©+óÜ@+/+(¬ÿÿþ©*þ ý„kÿÿþ©7übñ×ÿÿþ©7üËÿÿþ©8ýËÿÿþ©8ýËÿÿþ©8ýËÿÿþ©8ýËÿÿþ©8ýËÿÿþ©8ýËÿÿþ©8ýËÿÿþ©üEKh.ýËÿÿþ©úEùýàˆ.ýËÿÿþ©ùEùP+"/ýËÿÿù©qâ¸ÿþÿ1ÿ1ÿ0ÿ/ÿ.ÿ-ÿ,ÿ+ÿ*ÿ )ÿ (ÿ 'ÿ &ÿ %ÿ$ÿ#ÿ"ÿ!ÿ ÿÿÿÿÿÿÿÿ ÿ&ÿ'ÿ(ÿ)ÿ*ÿ+ÿ,ÿ-ÿ.ÿ/ÿ0 ÿ1 ÿ2 ÿ3 ÿ4 ÿ5ÿ6ÿ7ÿ8ÿ9ÿ:ÿ;ÿ<ÿ=þÿ¾þÿ=ÿ=ÿ<ÿ;ÿ:ÿ9ÿ8ÿ7ÿ6 ÿ5 ÿ4 ÿ3 ÿ2 ÿ1ÿ0ÿ/ÿ.ÿ-ÿ,ÿ+ÿ*ÿ)ÿ(ÿ'ÿ&ÿ%ÿ$ÿ#ÿ"ÿ!ÿ ÿ ÿ!ÿ"ÿ#ÿ$ÿ,þHÿÿþÝ9ù5õÿÿõ'7ùéÿÿüD9þÉÿÿþe8ýÒÿÿþ]8þÿÿýøA8ýÒÿÿþ\9þÉÿÿþf8ùëÿÿüE8ýãÿÿþK9þ}ÿÿþg9ú8ýÿÿb9ýîÿÿþb8þBÿÿýÉ8þ_ÿÿýÎ9þ²ÿÿýË8þ©ÿÿý÷/9þ©ÿÿþþ.þUÿÿþ8ý@ôÿÿþ8ý@ôÿÿþ8ý@ôÿÿþ8ý@ôÿÿþ8ý@ôÿÿþ8ý@ôÿÿþ8ý@ôÿÿþ8ý@ôÿÿþ8ý@ôÿÿý7ý@ôÿÿþ„8ý@ôÿÿ:ý@ôÿÿ;û@ôÿÿ;ü@ôÿ<ý@ô=þ@<þ <üEÙ¼:ûEù™§9ü)ùO<ýÞl;üâ]<ý)+œû"8öS,ÚÔíú}N4üqÿõÿÿýÈ2þqÿÿýÈ0þqÿÿü~–¬ÿÿýÈ /þjÿÿþOþ¬ÿÿþÒ/ý"ÚÿÿþOþ¬ÿÿþ}.ú*óÿÿOûÉÿÿ .þEÿÿþjù÷ÿÿ¿-ú5üÿÿdú Ñÿÿ¨.ýÆÿÿþdý Áÿÿþi/þoÿÿúd Áÿÿý×/þ\ÿÿü™³Áÿÿþ´1þ\ÿÿþ´3ü\ÿëÿÿþ´5÷<ÆÂÛèi88û hþ;ú&ª6õ:qéáÿÕú\A3ý»ÿÿþ§1ý»ÿ ÿþ§/ý»ÿ ÿþ§.ýÙÿÿüOjdÿÿþÇ.þqÿÿþOþdÿÿþ\-þ«ÿÿþOþdÿÿþ,ý&Úÿÿþ~þ™ÿÿýÆ+þlÿÿþ–þ³ÿÿþR,þ¡ÿÿþ¬ý Áÿÿþ†,ýÄÿÿþ¬ý Áÿÿþ¢-ýÞÿÿú¬ ÁÿÿþË.þ%ÿÿüÉ÷Ñÿÿýþ.þ_ÿ ÿýþJ0þ_ÿÿýþJ2ü_®Èÿÿü¶»J5÷k}ÿin9þ44ü+.ýñÿÿû©ƒÑ%ï!mpSôäùTqRW»ÿÿû©jë"ùk®Õÿÿüÿÿùýÿ¦Æ&Rÿ ÿýöüTkÿ ÿþæÿ ÿþÓý¶ÿÿûéôÿòÿÿþ©ý¶ÿÿ÷ÄŸ*>1åÁÿÿþ©ý¶ÿÿüôÿUüÿÿþ©ý¶ÿÿü¾(Fý»ÿÿþ©ý¶ÿÿý¾ þ[ÿÿþ©ý Ûÿÿý¾ þXÿÿþ©þkÿÿý¾ ý5öÿÿþ©þdÿÿþ þOÿÿþ©ýRüÿÿþU þ^ÿÿþÚÿÿþ©ýÕÿÿþU þ§ÿÿüJËÿÿþ©ýèÿÿþ: þ¦ÿÿû0Ëÿÿþ©þ6ÿÿþŸý=óÿ ÿþ•ýËÿÿþ© ú@øÿÿq û™~„Ùÿ ÿþqýËÿÿþ© úïÿÿü\ ø¯ÄèÛÂÔóÿ ÿþqýËÿÿþ© þÀÿÿþt õ¯š =òúÿ ÿþqýËÿÿþ© þÿÿõš' )"ý¾¢:ö§ãÿÝØÿJZOÿÿþqýËÿÿþ© ýçÿÿñšRÿÜßÿçØò=]ã†ú& $þOÿÿþqýËÿÿþ©ýÚÿ ÿúúÿ”Ö‹þOÿÿþqýËÿÿþ©ýQûÿ ÿý¤þOÿÿþqýËÿÿþ©þfÿÿþþOÿÿþqýËÿÿþ©þœÿÿþˆþOÿÿþqýËÿÿþ©þ2ÿÿýõ!þOÿÿþqýËÿÿþ©þRÿÿýõ=þOÿÿþqýËÿÿþ©þèÿÿýÈþOÿÿþqýËÿÿþ©þÉÿÿþ²þOÿÿþqýËÿÿü©ÿÿþŸþOÿÿþqýËÿÿý©ÿÿþ¹þOÿÿþqýËÿÿþ©ÿÿýÆþOÿÿþqýËÿÿþ¢þOÿÿþqýËÿÿþ•þOÿÿþqúËÿÿôÿÿþÕþOÿÿþqúËÿ@øÿÿýàþOÿÿþqü˪ÿÿýö0þPÿÿþqú¿¡œôÿ ÿý¹þPÿÿþqú@ôÿ ÿý¹þPÿÿþŒý@ôÿÿúþÿ·àÇÿÿý¹þPÿÿýÚ&ý@ôÿÿøþn‡»ÿÿý¹úP{¹ÿLý@ôÿÿþý»ÿÿý¹ýA ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹,ý@ôÿÿþý»ÿÿý¹þ_ý@ôÿÿþý»ÿÿý¹ý_ÿý@ôÿÿþý»ÿÿý¹ü_ÿÿý@ôÿÿþý»ÿÿý¹þ_ÿÿý@ôÿÿþý»ÿÿü¹ ýx_ÿÿý@ôÿÿþý»ÿÿû½ÅOü"ªÿÿý@ôÿÿþý»ÿÿóëšE1"N[@õ×ÿÿþaý@ôÿÿþü»öÿÿøåˆÖÿÿûÿÿüÊZaý@ôÿÿþ=ü+qÿÿýÊÿÿÿÿÿÿ ÿ!ÿ"ÿ#ÿ$ÿ% ÿ& ÿ' ÿ( ÿ) ÿ*ÿ+ÿ,ÿ-ÿ.ÿ/ÿ0ÿ1ÿ2þÿšþÿ0ÿ0ÿ/ÿ.ÿ-ÿ,ÿ+ÿ*ÿ) ÿ( ÿ' ÿ& ÿ% ÿ$ÿ#ÿ"ÿ!ÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿ!ÿ"ÿ#ÿ$ÿLþ©1ýÿ©0ÿþ©/ÿþ©.ÿýõ'-þËÿÿþ_-ýÎÿÿþ_,ýÉÿÿþr-þbÿÿýÈ,ýíÿÿýÈ ,þ¬ÿÿþÇ-þKÿÿýã,ùC÷ÿÿë-û“ÿÿÉ.úœÿÿÒ,ý"Öÿÿþ,þ]ÿÿýÒ,þeÿÿþÉ-ùDüÿÿé+ù'õÿÿõ5-þÝÿÿþH,þªÿÿþ€,þ„ÿÿþ‹,þkÿÿýÊ,ÿýÊ-ÿýûJ.ÿþZ.ÿþa/ýÿa0þaÎ%ÿ&ÿ'ÿ(ÿ)ÿ*ÿ+ÿ,ÿ-ÿ.ÿ/ÿ0ÿ1ÿ 2ÿ 3ÿ 4ÿ 5ÿ 6ÿ7ÿ8ÿ9ÿ:ÿ;ÿ<ÿ=ÿ>ÿþÿÿ ÿþÿ<ÿ<ÿ;ÿ:ÿ9ÿ8ÿ7ÿ6ÿ5 ÿ4 ÿ3 ÿ1ÿ/ÿ-ÿ+ÿ)ÿ'ÿ%ÿ#ÿ!ÿ ÿ"ÿ$ÿ&ÿ(ÿ*ÿ,ÿ.ÿ0ÿ 2ÿ 4ÿ 6ÿ8ÿ:ÿ<ÿ$ÿù@ôÿÿô6üq}Úÿÿú÷ÿ†™ ù@ôÒÿêð&ÚÏæúÓ×ÿÞÐé5Q"û©Yõ! H %ÿ &ÿ 'ÿ (ÿ )ÿ*ÿ+ÿ,ÿ-ÿ.ÿ/ÿ0ÿ1ÿþÿêÿ ZZ--€€ Backgroundÿ     ”T€€lV—€€ˆ&‹6F”€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×׈€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯@@vigor-0.016.orig/vigor/vigor_ent_0004.xcf0100644000076400007640000005362507103707230016567 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿ‚ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿBB“¼path 0 BtB\B‚BPB‚BPBŠB\BŠB\BŠBdBŠBdB‚BTB‚BTBtBdBtBdBtB\ߦ¦ Background#2ÿ     ÿÿÿýÿÿÿý“t¦¦‡“¦¦À Qó Û(%Ãm¾ÿ:ÿ8ÿ6ÿ3ÿ 1ÿ .ÿ,ÿ*ÿ'ÿ%ÿ"ÿ ÿÿ!ÿ#ÿ%ÿ(ÿ*ÿ-ÿ/ ÿ1 ÿ4ÿ6ÿ9ÿ;þÿþþÿ=þÿ=ÿ=ÿ=ÿ=ÿ<ÿ<ÿ;ÿ;ÿ;ÿ:ÿ:ÿ9¾ýXº9ú€âÿÿ8þÿÿ8ü4•üÿÿ6ý9¾ÿÿýô’5þtÿÿüÒj3üqÓÿÿþt6þÃÿÿý¶U5ý5èÿÿýý96üuüÿÿý¡6þ³ÿÿþ³7ø6ðÿÿýŒ+6üwüÿÿþ:8þÅÿÿþ±8þMÿÿýü47ýÌÿÿýÁ7ý?åÿÿþƒ8þAÿÿþ8ú4ëÿÿ9ú’ÿÿê@8þ!ÿÿþ19þ¹ÿÿþ“9ùWÿÿüƒ7ýÑÿÿþW9þ“ÿÿþ¹9þ1ÿÿýÉ8þ‚ÿÿþ}9þmÿÿþß9ý ÷ÿÿþT9þ–ÿÿþ¶;2ÿ:ÿ6ÿ4ÿ 1ÿ.ÿ+ÿ(ÿ&ÿ#ÿ ÿÿ"ÿ$ÿ&ÿ*ÿ,ÿ0 ÿ2 ÿ6ÿ8ÿ:ÿ>þÿ=þÿ ÚûOC>7õxÙÿçÿñÁ4ö-SQH.0î0‘IU·ÿËÝÿïÿüÊÿ¤D-ÿþõÿ ÿüò΂,ÿüñŽL)ÿõðÿÿ½wù™óÓáÿÿþÐ)ðÿ»Y•3 )6lÑÿÿüðŒK&þ1 ü[¼âÿÿþÏ6û 2~þÿÿýE7ý ¥ÿÿýðº8þDÿÿþ08ý^ÀÿÿýÊ8þYÿÿþ8ýÀåÿÿþ|9þnÿÿþÞ9ý øÿÿþT9þ–ÿÿþ¶9þ4ÿÿþ,9þ¾ÿÿþ9þ]ÿÿýï9þçÿÿþe9þ…ÿÿþÆ9þ$ÿÿþ<9þ®ÿÿþž'ôVJ|Œ@þLÿÿþ#úàÿëÿÿúôŠ´„BþÖÿÿþu!ýF§ÿ ÿüíþuÿÿþ×ýËÿÿýÑwþÿÿþMý[äÿÿöõ›üÐnĪ·óÿÿýÙ\þÿÿþ¯ý:åÿÿòÍk * %Ÿþÿÿùbv„:³ÿÿþ%ûp~#üxþÿÿýÁC ýœóÿÿûèÿÿþÿÿö†˜úªþü#þ¼ÿÿþ ý'ÿ ÿöè!îI5†Jùïÿÿý.þÊÿ ÿû^”ÈÜÿþÿ#ÿþÿ#ÿ#ÿ#ÿ"ÿ"ÿ"ÿ!ÿ!ÿ ÿ ÿ ÿÿÿÿÿÿÿÿÿÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿÿÿÿÿÿ €ÿ9ÿ9ÿ8ÿ8ÿ7ÿ7ÿ6ÿ6ÿ6 ÿ3ý`Âÿÿ2þ[ÿ ÿ/üu×ÿ ÿ0þÏÿ ÿ.ýAìÿÿ-þÿÿþºÿ ÿ-ýFéÿÿþxÿ ÿ,þRÿÿýûÿ ÿ,ý9ñÿÿþpÿ ÿ+þÿÿþÒÿ ÿ+þ,ÿÿ,þ¶ÿÿ+þTÿÿ,ýSËÿÿ,ýiÊÿÿ,üàÿÿ.þ9ÿÿ.ÿ.ÿ-ÿ-ÿ-ÿ,ÿ,ÿ+ÿ+ÿ*ÿ*ÿ*ÿ)ÿ)ÿ(ÿ(ÿ(ÿ'ÿ'ÿ&ÿ&ÿ%ÿ%ÿ%ÿ$ÿ$ÿ#ÿ#ÿ#ÿ"ÿ"ÿ!ÿ!ÿ ÿ ÿ ÿÿ/þ4ÿÿþ,ýz/þ¾ÿÿþŽý¾ÿ/þ\ÿÿýïü<ðÿ0þæÿÿþeüüÿ0þ…ÿÿþÇüAæÿ0þ#ÿÿþ=üMÿÿ1þ­ÿÿþžü4ïÿ1þLÿÿþüšÿÿ2þÖÿÿúv¯ÿÿ3þtÿÿúØ:ðÿÿ3ýþÿÿýNyÿÿ4þœÿÿýÈÃÿÿ4þ;ÿÿ5þÅÿÿ5þcÿÿ5ýíÿÿ6þŒÿÿ4ü8*ÿÿ1ø{Üú®9Òÿÿ1ùȵ5tµøÿÿ0öD÷s 'µéÿÿ0üû þ{ÿÿ1þ þÿÿ9þ£ÿÿ9þBÿÿ:þÌÿÿ:þjÿÿ:ý ôÿÿ;þ“ÿÿ;þ1ÿÿ<ü»ÿÿ;üZÿÿ<ýäÿ<ý‚ÿ<ý ÿ=þª=þI¿þ&ÿÿþ…2ü(ûÿÿüð¿0þ–ÿÿúü›<Éìÿÿþp/þ'ÿÿü×rþzÿÿþÒ/úzûÿÿgþÿÿþH.ûyÿÿ×þ¢ÿÿþƒ-ývÿÿþ5úAÿÿù .þµÿÿþ—úxûÿÿfø8™8]H!E þSÿÿýù ú¹ÿÿÕÿøõÿëÿè þÝÿÿú|>=Ÿÿÿý†ÿýÖr þ|ÿÿýîÇÿÿýêEÿýÖd ü:òÿÿþÔÿþñÿÿþ] ý‚ÀÿÿüÕtùÿÆdq¸ÿÿþ¾ ø<ÊqЭKþ<þ?ÿÿþ4þ&þÉÿÿþ–8þhÿÿýó,8ýôÿÿþZ8þ{ÿÿýæ>2þHýKÂÿÿþ2úÂsÕÿÿýÝ>2ÿþþÿÿþÑ4ÿýÊf4ÿþ\5÷þäÿîÿÿ³Q6ùÿÿþ"þÿÿþÞ þxÿÿþÔþÈÿÿþƒþÿÿþ| þÿÿþIþgÿÿþåú°ÿÿå? þ¡ÿÿþ«ýñÿÿþ[þ8ÿÿýÌ þ?ÿÿþ!þÿÿþ¼ù)‹ýÿÿMþÉÿÿþƒþ.ÿÿþ2þ±ÿÿþÅþgÿÿþäþ¸ÿÿþ”þ:ÿÿüüwýñÿÿþLþVÿÿýö ø+Œýÿÿð6ûÿÿÂþàÿÿý¹sþ³ÿÿþ³ú;ÿÿýÒÿÿüá4ý@¡ÿÿüüuüŠs ü õÿÿþjþÿÿýè5þ”ÿÿýâ¹ýU¶ÿÿþà ýCÿÿûl6(ü}ßÿÿüÓq!þ©ÿÿóáÒô˜Z/€lD¦ÿÿý¸I$ýB£ÿÿùñÿßÿÿøÿÿþhÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿÿÿÿÿÿÿÿÿÿÿ ÿ ÿ!ÿ!ÿ!ÿ"ÿ"ÿ#ÿ#ÿ#ÿ$þÿ#þÿ–þÿ ÿÿÿ ÿ ÿÿÿÿÿ € ÿ ÿ ÿ!ÿ!ÿ"ÿ"ÿ"ÿ#ÿ#ÿ$ÿ$ÿ%ÿ%ÿ%ÿ&ÿ&ÿ'ÿ'ÿ'ÿ(ÿ(ÿ)ÿ)ÿ*ÿ*ÿ*ÿ+ÿ+ÿ,ÿ,ÿ,ÿ-ÿ.ÿ1ÿ 4ÿ6ÿ:ÿ ÿ €¾ÿ:ÿ8ÿ6ÿ3 ÿ1 ÿ.ÿ,ÿ*ÿ'ÿ%ÿ"ÿ ÿ ÿ#ÿ%ÿ(ÿ*ÿ-ÿ/ÿ 1ÿ 4ÿ6ÿ9ÿ;ÿ¾ÿü-’Èÿÿü÷•4*ûGËüÿÿù÷ÿÿÏm /óI‘¶“ò¨ÿÌj ‹E3ù2œ ÿ ÿÿ ÿ ÿ¤SS))€€ Backgroundÿ     ’F€€^W‰€€z'}7‚G†€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×׈€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯@@vigor-0.016.orig/vigor/vigor_wav_0001.xbm0100644000076400007640000003117707103707230016577 0ustar cjw44cjw44/* Vigor waving */ #define vigor_wav_0001_width 128 #define vigor_wav_0001_height 128 static char vigor_wav_0001_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0xff, 0x0f, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0xfe, 0x27, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0xf8, 0xff, 0xff, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0xfe, 0xff, 0xff, 0x4f, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0xfe, 0xff, 0xff, 0x0f, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0xc8, 0xff, 0xff, 0xff, 0xbf, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0xf9, 0xff, 0x41, 0xf8, 0xff, 0x01, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0xfc, 0x0f, 0x09, 0x40, 0xff, 0x03, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0xfc, 0x2f, 0x80, 0x04, 0xff, 0x4b, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0xfe, 0x87, 0x12, 0x90, 0xfc, 0x07, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0xff, 0x10, 0x20, 0x01, 0xe1, 0x0f, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0xc0, 0x7f, 0x42, 0x02, 0x04, 0xc8, 0x3f, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0xd5, 0x3f, 0x08, 0xa4, 0x90, 0xd0, 0x1f, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xe0, 0xaf, 0xa2, 0x00, 0x04, 0x80, 0x3f, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0xe5, 0x07, 0x04, 0x94, 0x40, 0x22, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0xf8, 0x2b, 0x91, 0x00, 0x0a, 0x08, 0x7e, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0xf2, 0x03, 0x22, 0x52, 0x20, 0x41, 0xfe, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0xf8, 0x2b, 0x88, 0x00, 0x02, 0x10, 0xfd, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x7a, 0x40, 0x11, 0x4a, 0x48, 0x02, 0xfa, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0xf8, 0x0a, 0x44, 0x00, 0x21, 0x20, 0xf8, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x7f, 0xa0, 0x08, 0x29, 0x84, 0x04, 0xfc, 0x45, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xfe, 0x0a, 0x22, 0x84, 0x20, 0x50, 0xf8, 0x01, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x3e, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xf4, 0x09, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x7e, 0x85, 0x0a, 0x02, 0x52, 0x00, 0xf0, 0x21, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x3f, 0x10, 0x40, 0x48, 0x40, 0x4a, 0xf2, 0x03, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xbf, 0x4a, 0x15, 0x21, 0x02, 0x00, 0xf0, 0x23, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x3f, 0x10, 0x20, 0x45, 0x48, 0x92, 0xe4, 0x07, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x5f, 0x45, 0x05, 0x10, 0x21, 0x08, 0xf0, 0x23, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x1f, 0x10, 0xa8, 0x22, 0x04, 0x41, 0xe2, 0x05, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xbf, 0x4a, 0x01, 0x88, 0x52, 0x14, 0xf0, 0x21, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x9f, 0x10, 0x55, 0x11, 0x00, 0x40, 0xf2, 0x05, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x1f, 0x45, 0x00, 0x44, 0xa5, 0x04, 0xf0, 0x51, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x5f, 0x88, 0xaa, 0xff, 0x05, 0xa8, 0xf2, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x9f, 0x12, 0xf0, 0xff, 0x5f, 0x01, 0xf8, 0x01, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x3f, 0x50, 0xfd, 0xff, 0x7f, 0x88, 0xf0, 0x95, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x5f, 0x05, 0xff, 0xff, 0xff, 0x21, 0xf2, 0x01, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x9f, 0xa8, 0xff, 0xff, 0xff, 0x04, 0xf4, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x5f, 0xc2, 0xff, 0xa1, 0xff, 0x53, 0xf0, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x5f, 0xea, 0x1f, 0x05, 0xfc, 0x07, 0xf9, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x9f, 0xe8, 0x47, 0xa8, 0xf0, 0x57, 0xf8, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x3f, 0xf9, 0x95, 0x02, 0xc2, 0x0f, 0xfa, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x5f, 0xe2, 0x41, 0xa8, 0x14, 0x5f, 0xf8, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4f, 0xf4, 0x8a, 0x82, 0x40, 0x8f, 0xfa, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x2f, 0xf9, 0x28, 0x14, 0x2a, 0x1f, 0xf8, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x4f, 0xfe, 0x42, 0xa1, 0x40, 0x5e, 0x79, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0xaf, 0xff, 0x17, 0x0a, 0x0a, 0xfe, 0x7c, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0xff, 0x03, 0xa7, 0xa0, 0xd0, 0xff, 0x7f, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0xff, 0x00, 0x1c, 0x15, 0xe5, 0x03, 0x7f, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0xff, 0x00, 0x5c, 0x20, 0xe0, 0x03, 0x7f, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x1f, 0x00, 0xb0, 0x4a, 0xfd, 0x00, 0x7c, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x1f, 0x00, 0xf0, 0x08, 0x78, 0x00, 0x78, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x3e, 0x0f, 0x00, 0x60, 0x52, 0x19, 0x00, 0x70, 0x3e, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x73, 0x0f, 0xfc, 0xe0, 0xfe, 0x1c, 0xfc, 0x70, 0xf3, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0xf7, 0x07, 0xfe, 0xc1, 0xf6, 0x0d, 0xfe, 0xe1, 0x35, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0xc4, 0x07, 0xfe, 0xc1, 0xd3, 0x0f, 0xfe, 0xe0, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x07, 0xfe, 0xc1, 0x85, 0x0f, 0xff, 0x20, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x07, 0xfe, 0xc1, 0xa9, 0x0f, 0xff, 0x60, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x07, 0xfe, 0x40, 0x42, 0x0f, 0xff, 0x20, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x07, 0xfe, 0xc0, 0x14, 0x0f, 0xff, 0x20, 0xa8, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0x0f, 0x7c, 0x60, 0x49, 0x1f, 0x7e, 0x78, 0x01, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x0f, 0x00, 0x60, 0x92, 0x1e, 0x00, 0x38, 0x55, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x1f, 0x00, 0x70, 0x49, 0x3e, 0x00, 0x3c, 0x00, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x1f, 0x00, 0x10, 0x11, 0x7d, 0x00, 0x9e, 0x2a, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x7f, 0x00, 0x4e, 0x4a, 0xfa, 0xc1, 0x3f, 0x80, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0xff, 0x83, 0x97, 0x90, 0xf0, 0xff, 0x9f, 0x2a, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0xff, 0xff, 0x49, 0x4a, 0x8a, 0xbf, 0x3e, 0x80, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xdf, 0x7f, 0x4a, 0x49, 0x22, 0x2f, 0x3f, 0x15, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x2f, 0xff, 0x28, 0x92, 0x94, 0x9f, 0x5f, 0x40, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x4f, 0xbf, 0xa2, 0x24, 0xa1, 0x2f, 0x1f, 0x15, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaf, 0x5f, 0x8a, 0x92, 0x94, 0x4f, 0xbf, 0x40, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x9f, 0x9f, 0x28, 0x92, 0xa2, 0x4f, 0x0f, 0x14, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xe4, 0x27, 0x3f, 0xa5, 0x24, 0x94, 0x87, 0x5f, 0x21, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0xfa, 0x57, 0x5f, 0x09, 0x49, 0xa1, 0x2f, 0x0f, 0x45, 0x41, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0xff, 0x4b, 0x3f, 0x55, 0x92, 0x8a, 0x47, 0x5f, 0x08, 0x0a, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0xf4, 0xff, 0x53, 0x5f, 0xa2, 0x24, 0xa8, 0x97, 0x0f, 0x51, 0xa0, 0x52, 0x24, 0x55, 0x55, 0x55, 0xfd, 0x7f, 0x8a, 0x5f, 0x49, 0x49, 0xc5, 0xcf, 0x5f, 0x82, 0x0a, 0x00, 0x91, 0x55, 0x55, 0xd5, 0xff, 0x4f, 0x35, 0x5f, 0x2a, 0x92, 0x94, 0xcf, 0x4f, 0x2a, 0xa0, 0x2a, 0x02, 0xaa, 0xaa, 0xf4, 0xff, 0x55, 0xc2, 0x9f, 0x44, 0x25, 0xa1, 0x97, 0x2f, 0x90, 0x0a, 0x80, 0x48, 0xaa, 0xaa, 0xfe, 0xbf, 0xa4, 0x1a, 0x5f, 0x29, 0x49, 0xca, 0x97, 0x87, 0x22, 0x48, 0x15, 0x01, 0x55, 0xd5, 0xff, 0xab, 0x2a, 0x65, 0x9f, 0x4a, 0x2a, 0xe9, 0xcf, 0x57, 0x44, 0x21, 0x40, 0x94, 0x55, 0xf5, 0xff, 0x4a, 0x55, 0x4a, 0x5f, 0x52, 0x49, 0xc2, 0x97, 0x8f, 0x14, 0x8a, 0x8a, 0x00, 0xaa, 0xfa, 0xbf, 0xaa, 0xa4, 0x52, 0xaf, 0x24, 0x92, 0xd4, 0xa7, 0x27, 0xa1, 0x20, 0x20, 0x2a, 0x55, 0xfd, 0x57, 0x55, 0x55, 0x55, 0x8f, 0xaa, 0x54, 0xe5, 0x8b, 0x27, 0x0a, 0x25, 0x45, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x5f, 0xa2, 0x22, 0xd4, 0xa7, 0x97, 0x50, 0x90, 0x10, 0x89, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xaf, 0x2a, 0xaa, 0xe2, 0xcb, 0x27, 0x05, 0x05, 0x22, 0x01, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x2f, 0x45, 0x91, 0xd4, 0xe7, 0x4f, 0xa8, 0x50, 0x09, 0x94, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x5f, 0x54, 0xa5, 0xe4, 0xcb, 0x97, 0x22, 0x0a, 0x40, 0x11, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x5f, 0x25, 0x89, 0xd2, 0xd3, 0x47, 0x44, 0x51, 0x15, 0x44, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4f, 0x49, 0x2a, 0xca, 0xd3, 0x97, 0x14, 0x42, 0xa0, 0x08, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x9f, 0xaa, 0x52, 0xf1, 0xe7, 0x23, 0xa1, 0x14, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x5f, 0x4a, 0x4a, 0xea, 0xcb, 0x4b, 0x8a, 0xa0, 0x28, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaf, 0x94, 0x94, 0xf2, 0xd3, 0x27, 0x11, 0x05, 0x45, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x9f, 0x52, 0xa5, 0xf4, 0xe5, 0x4b, 0x52, 0x54, 0x08, 0x51, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x5f, 0x95, 0x28, 0xf1, 0xeb, 0x93, 0x84, 0x82, 0x52, 0x04, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x9f, 0xa4, 0x4a, 0xf5, 0xf3, 0x27, 0x29, 0x28, 0x82, 0x50, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x5f, 0x95, 0x92, 0xe2, 0xe9, 0x49, 0x92, 0x42, 0x14, 0x05, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x9f, 0x54, 0x2a, 0xea, 0xeb, 0x93, 0xa4, 0x94, 0x50, 0x50, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x5f, 0xa5, 0x54, 0xe9, 0xf1, 0x49, 0x12, 0x49, 0x82, 0x0a, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaf, 0x4a, 0x45, 0xe5, 0xeb, 0x93, 0x24, 0x49, 0x2a, 0x40, 0xad, 0xaa, 0x56, 0x55, 0x55, 0xd5, 0x9f, 0x94, 0x94, 0xd4, 0xe4, 0x25, 0x49, 0x22, 0x41, 0x15, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0xd4, 0x5f, 0x55, 0x29, 0x45, 0xe9, 0x49, 0x92, 0x48, 0x14, 0x44, 0xd5, 0x56, 0x55, 0x55, 0x55, 0xd5, 0x9f, 0x52, 0x55, 0xaa, 0xf2, 0x93, 0x24, 0x25, 0x49, 0x11, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x5f, 0x2a, 0xa5, 0x24, 0xfa, 0x2a, 0x49, 0x44, 0x22, 0x52, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xbf, 0x52, 0x4a, 0x49, 0x7d, 0xa2, 0x24, 0x29, 0x49, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x5f, 0xa5, 0x94, 0xaa, 0xbe, 0x24, 0x49, 0x42, 0x12, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xbe, 0xaa, 0x2a, 0x49, 0x3e, 0x95, 0x92, 0x14, 0x49, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xbe, 0xaa, 0x52, 0x95, 0x7e, 0x51, 0xa4, 0x24, 0x11, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x7d, 0x92, 0x54, 0x52, 0x9f, 0x8a, 0x0a, 0x49, 0x4a, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xfa, 0xab, 0x4a, 0xd5, 0x2f, 0x29, 0x51, 0x92, 0x90, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0xf5, 0x57, 0xa9, 0xe4, 0xaf, 0xa4, 0x94, 0x24, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xf5, 0x9f, 0x2a, 0xfd, 0x27, 0x29, 0x25, 0x49, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xea, 0xff, 0xd2, 0xff, 0x4a, 0x45, 0x52, 0x92, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0xfe, 0xff, 0x3f, 0x29, 0xa9, 0x94, 0x52, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0xfd, 0xff, 0x57, 0x4a, 0x4a, 0x21, 0x8a, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x7f, 0xa5, 0x52, 0x49, 0xaa, 0x90, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0xaa, 0x92, 0x92, 0x2a, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xa5, 0x12, 0x55, 0x52, 0x22, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x54, 0xaa, 0xa4, 0x8a, 0x94, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x4a, 0x89, 0xa8, 0x92, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0x52, 0x55, 0x25, 0x29, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x2a, 0x29, 0x49, 0x22, 0x49, 0x52 }; vigor-0.016.orig/vigor/vigor_ent_0001.xbm0100644000076400007640000003120107103707230016554 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0001_width 128 #define vigor_ent_0001_height 128 static char vigor_ent_0001_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x29, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x44, 0x05, 0x02, 0x81, 0x48, 0x21, 0x22, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x94, 0xa8, 0x28, 0x15, 0x08, 0x04, 0x44, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x42, 0x42, 0x42, 0xa0, 0xa2, 0x50, 0x00, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x48, 0x4a, 0x14, 0x05, 0x04, 0x02, 0x29, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x8a, 0x88, 0x42, 0xa8, 0x50, 0x54, 0x00, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x29, 0x29, 0x94, 0x02, 0x82, 0x00, 0x4a, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x42, 0x42, 0x41, 0xa8, 0x14, 0x52, 0x00, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4a, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x52, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x24, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x08, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x49, 0x8a, 0x42, 0xa1, 0x40, 0x51, 0x41, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0x24, 0x11, 0x14, 0x0a, 0x0a, 0x04, 0x04, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0x49, 0x52, 0xa1, 0xa0, 0x50, 0x91, 0x50, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0x92, 0x24, 0x0a, 0x15, 0x05, 0x44, 0x02, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0xa4, 0x50, 0x20, 0xa0, 0x08, 0x4a, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x24, 0x09, 0x85, 0x4a, 0x15, 0x22, 0x20, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x49, 0x52, 0x94, 0x08, 0x40, 0x44, 0x05, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0x25, 0x89, 0x22, 0x52, 0x95, 0x08, 0x50, 0x08, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0x29, 0x29, 0x4a, 0x82, 0x10, 0x51, 0x05, 0x81, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xa2, 0x44, 0x91, 0x14, 0x45, 0x04, 0x50, 0x14, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0x0a, 0x29, 0x24, 0x51, 0x10, 0xa9, 0x82, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x54, 0x92, 0x92, 0x84, 0x4a, 0x00, 0x14, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x91, 0x52, 0x12, 0x29, 0x88, 0xaa, 0x40, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x2a, 0x82, 0x24, 0x42, 0x51, 0x00, 0x15, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x44, 0xaa, 0xa4, 0x14, 0x85, 0x2a, 0x20, 0xa8, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x04, 0x09, 0x49, 0x28, 0x40, 0x45, 0x01, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x2a, 0x59, 0x52, 0x92, 0x42, 0x15, 0x08, 0x55, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x22, 0x49, 0x49, 0x14, 0xa2, 0x22, 0x00, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x4a, 0x12, 0x11, 0xa1, 0x08, 0x88, 0x2a, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x29, 0x49, 0x4a, 0x0a, 0xa5, 0x22, 0x80, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0x45, 0x92, 0x90, 0x50, 0x08, 0x88, 0x2a, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0x52, 0x49, 0x4a, 0x8a, 0xa2, 0x22, 0x80, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0x14, 0x4a, 0x49, 0x22, 0x24, 0x24, 0x15, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xa9, 0x28, 0x92, 0x94, 0x92, 0x42, 0x40, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xa2, 0xa2, 0x24, 0x21, 0x22, 0x08, 0x15, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0x4a, 0x8a, 0x92, 0x94, 0x48, 0xa5, 0x40, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0x94, 0x28, 0x92, 0x22, 0x49, 0x08, 0x14, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0x29, 0xa5, 0x24, 0x94, 0x84, 0x52, 0x21, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x45, 0x09, 0x49, 0x21, 0x29, 0x02, 0x45, 0x41, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0x49, 0x2a, 0x55, 0x92, 0x8a, 0x44, 0x54, 0x08, 0x0a, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0x51, 0xa2, 0x24, 0x28, 0x91, 0x04, 0x51, 0xa0, 0x52, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0x8a, 0x4a, 0x49, 0x49, 0x45, 0x4a, 0x52, 0x82, 0x0a, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0x4a, 0x2a, 0x92, 0x94, 0x48, 0x44, 0x2a, 0xa0, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0x94, 0x44, 0x25, 0x21, 0x91, 0x28, 0x90, 0x0a, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0x51, 0x29, 0x49, 0x4a, 0x92, 0x82, 0x22, 0x48, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0x95, 0x4a, 0x2a, 0x29, 0x49, 0x54, 0x44, 0x21, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0x52, 0x52, 0x49, 0x42, 0x12, 0x89, 0x14, 0x8a, 0x8a, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xa5, 0x24, 0x92, 0x94, 0xa4, 0x24, 0xa1, 0x20, 0x20, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x8a, 0xaa, 0x54, 0x25, 0x89, 0x24, 0x0a, 0x25, 0x45, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x54, 0xa2, 0x22, 0x94, 0x24, 0x92, 0x50, 0x90, 0x10, 0x89, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0x2a, 0xaa, 0x22, 0x49, 0x22, 0x05, 0x05, 0x22, 0x01, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0x45, 0x91, 0x94, 0x24, 0x49, 0xa8, 0x50, 0x09, 0x94, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0x54, 0xa5, 0x24, 0x49, 0x92, 0x22, 0x0a, 0x40, 0x11, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0x25, 0x89, 0x52, 0x92, 0x44, 0x44, 0x51, 0x15, 0x44, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0x49, 0x2a, 0x8a, 0x92, 0x94, 0x14, 0x42, 0xa0, 0x08, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xaa, 0x52, 0x51, 0x24, 0x21, 0xa1, 0x14, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x4a, 0x4a, 0x4a, 0x49, 0x4a, 0x8a, 0xa0, 0x2c, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x94, 0x94, 0x92, 0x92, 0x24, 0x11, 0x05, 0x45, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0x52, 0xa5, 0x54, 0x24, 0x49, 0x52, 0x54, 0x08, 0x51, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x28, 0x91, 0x4a, 0x92, 0x84, 0x82, 0x56, 0x04, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xa4, 0x4a, 0x55, 0x92, 0x24, 0x29, 0x28, 0x8e, 0x50, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0x95, 0x92, 0x22, 0x29, 0x49, 0x92, 0x42, 0x1c, 0x05, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0x54, 0x2a, 0x4a, 0x4a, 0x92, 0xa4, 0x94, 0x78, 0x50, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xa5, 0x54, 0xa9, 0x50, 0xf9, 0xff, 0xff, 0xff, 0xff, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x45, 0x25, 0x4b, 0xff, 0xff, 0xff, 0x5f, 0xff, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0x94, 0x94, 0x54, 0xe4, 0xff, 0xff, 0xff, 0x0f, 0xf8, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x55, 0x29, 0x45, 0xf9, 0x5f, 0x92, 0xe8, 0x03, 0x70, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0x52, 0x55, 0xaa, 0xfe, 0x93, 0x24, 0xe5, 0x01, 0x20, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xa5, 0x24, 0xfe, 0x2a, 0x49, 0xe4, 0xa0, 0x42, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x52, 0x4a, 0x49, 0x3f, 0xa2, 0x24, 0xe9, 0xf0, 0x43, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0x94, 0xaa, 0xbf, 0x24, 0x49, 0xe2, 0xf8, 0xc7, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0xc9, 0x2f, 0x95, 0x92, 0xf4, 0xf0, 0x87, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x52, 0xd5, 0x4f, 0x51, 0xa4, 0x7c, 0xf8, 0xc3, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x54, 0xf2, 0x97, 0x8a, 0x0a, 0xff, 0xf0, 0x87, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xf5, 0x25, 0x29, 0xd1, 0xff, 0xf0, 0xc3, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xf4, 0xa8, 0xa4, 0xd4, 0xef, 0xa1, 0x60, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0x2a, 0xf9, 0x25, 0x29, 0xe5, 0xcb, 0x00, 0x60, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0x52, 0xf5, 0x4a, 0x45, 0xf2, 0xd3, 0x03, 0xb0, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xa5, 0x7a, 0x29, 0xa9, 0xf4, 0xd2, 0x0f, 0x3c, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x7a, 0x4a, 0x4a, 0x79, 0x8a, 0xbf, 0x8e, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xbd, 0x52, 0x49, 0xfa, 0x90, 0xfc, 0x23, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x7d, 0xaa, 0x92, 0xba, 0x2a, 0x75, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xbd, 0x12, 0x55, 0x7e, 0x22, 0x79, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x5c, 0xaa, 0xa4, 0xbe, 0x94, 0x3c, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x9d, 0x4a, 0x89, 0xbc, 0x92, 0x2c, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x5e, 0x52, 0x55, 0x3d, 0x29, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xbe, 0x2a, 0x29, 0x5d, 0x22, 0x49, 0x52 }; vigor-0.016.orig/vigor/vigor_ent_0002.xbm0100644000076400007640000003120107103707230016555 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0002_width 128 #define vigor_ent_0002_height 128 static char vigor_ent_0002_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x29, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x44, 0x05, 0x02, 0x81, 0x48, 0x21, 0x22, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x94, 0xa8, 0x28, 0x15, 0x08, 0x04, 0x44, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x42, 0x42, 0x42, 0xa0, 0xa2, 0x50, 0x00, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x48, 0x4a, 0x14, 0x05, 0x04, 0x02, 0x29, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x8a, 0x88, 0x42, 0xa8, 0x50, 0x54, 0x00, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x29, 0x29, 0x94, 0x02, 0x82, 0x00, 0x4a, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x42, 0x42, 0x41, 0xa8, 0x14, 0x52, 0x00, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4a, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x52, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x24, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x08, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x49, 0x8a, 0x42, 0xa1, 0x40, 0x51, 0x41, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0x24, 0x11, 0x14, 0x0a, 0x0a, 0x04, 0x04, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0x49, 0x52, 0xa1, 0xa0, 0x50, 0x91, 0x50, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0x92, 0x24, 0x0a, 0x15, 0x05, 0x44, 0x02, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0xa4, 0x50, 0x20, 0xa0, 0x08, 0x4a, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x24, 0x09, 0x85, 0x4a, 0x15, 0x22, 0x20, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x49, 0x52, 0x94, 0x08, 0x40, 0x44, 0x05, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0x25, 0x89, 0x22, 0x52, 0x95, 0x08, 0x50, 0x08, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0x29, 0x29, 0x4a, 0x82, 0x10, 0x51, 0x05, 0x81, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xa2, 0x44, 0x91, 0x14, 0x45, 0x04, 0x50, 0x14, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0x0a, 0x29, 0x24, 0x51, 0x10, 0xa9, 0x82, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x54, 0x92, 0x92, 0x84, 0x4a, 0x00, 0x14, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x91, 0x52, 0x12, 0x29, 0x88, 0xaa, 0x40, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x2a, 0x82, 0x24, 0x42, 0x51, 0x00, 0x15, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x44, 0xaa, 0xa4, 0x14, 0x85, 0x2a, 0x20, 0xa8, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x04, 0x09, 0x49, 0x28, 0x40, 0x45, 0x01, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x2a, 0x59, 0x52, 0x92, 0x42, 0x15, 0x08, 0x55, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x22, 0x49, 0x49, 0x14, 0xa2, 0x22, 0x00, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x4a, 0x12, 0x11, 0xa1, 0x08, 0x88, 0x2a, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x29, 0x49, 0x4a, 0x0a, 0xa5, 0x22, 0x80, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0x45, 0x92, 0x90, 0x50, 0x08, 0x88, 0x2a, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0x52, 0x49, 0x4a, 0x8a, 0xa2, 0x22, 0x80, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0x14, 0x4a, 0x49, 0x22, 0x24, 0x24, 0x15, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xa9, 0x28, 0x92, 0x94, 0x92, 0x42, 0x40, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xa2, 0xa2, 0x24, 0x21, 0x22, 0x08, 0x15, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0x4a, 0x8a, 0x92, 0x94, 0xdf, 0xa5, 0x40, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0x94, 0x28, 0x92, 0xf2, 0xff, 0x0f, 0x14, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0x29, 0xa5, 0x24, 0xfe, 0xff, 0x5f, 0x21, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x45, 0x09, 0xc9, 0xff, 0xff, 0x7f, 0x45, 0xc1, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0x49, 0x2a, 0x55, 0xd2, 0xff, 0xe4, 0xff, 0x0b, 0x6a, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0x51, 0xa2, 0xe4, 0x3f, 0x91, 0xfc, 0x5f, 0xa0, 0x52, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0x8a, 0x4a, 0x49, 0xf9, 0x47, 0x4a, 0xf2, 0xff, 0x3a, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0x4a, 0x2a, 0xfa, 0x94, 0x48, 0xc4, 0xff, 0xa1, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0x94, 0x44, 0xfd, 0x21, 0x91, 0x28, 0xfe, 0x6f, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0x51, 0x29, 0x7f, 0x4a, 0x92, 0x82, 0xfa, 0x7f, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0x95, 0x4a, 0x3f, 0x29, 0x49, 0x54, 0xc4, 0xff, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0x52, 0x52, 0x4f, 0x42, 0x12, 0x89, 0xd4, 0xb7, 0x8f, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xa5, 0xe4, 0x9f, 0x94, 0xa4, 0x24, 0xf1, 0x01, 0x3e, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x8a, 0xea, 0x57, 0x25, 0x89, 0x24, 0xfa, 0x00, 0x7c, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x54, 0xe2, 0x23, 0x94, 0x24, 0x92, 0x72, 0x00, 0xf8, 0x8b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0xea, 0xab, 0x22, 0x49, 0xf2, 0x3f, 0x38, 0xf0, 0x0f, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0xe5, 0x91, 0x94, 0x24, 0xf9, 0x3f, 0xfc, 0xf0, 0xff, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0xf4, 0xa5, 0x24, 0x49, 0xfe, 0x3f, 0xfc, 0xf1, 0xff, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0xf5, 0x89, 0x52, 0x92, 0xff, 0x1d, 0xfe, 0x11, 0xfe, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0xf9, 0x2a, 0x8a, 0x92, 0x9f, 0x3c, 0xfe, 0xa1, 0xf8, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xfa, 0x52, 0x51, 0xe4, 0x2f, 0x1d, 0xfc, 0x30, 0xe1, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xfa, 0x4a, 0x4a, 0xe9, 0x4b, 0x3a, 0xfc, 0x30, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0xfc, 0x94, 0x92, 0xf2, 0x27, 0x79, 0x30, 0xf0, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0x72, 0xa5, 0x54, 0xf4, 0x49, 0x7a, 0x00, 0xf8, 0x57, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xf5, 0x28, 0x91, 0xfa, 0x92, 0xf4, 0x00, 0xfc, 0x1f, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xfc, 0x4a, 0x55, 0xfa, 0x24, 0xe9, 0x01, 0xe7, 0xff, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0xfd, 0x92, 0x22, 0x79, 0x49, 0xf2, 0xef, 0x17, 0xff, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xf4, 0x2a, 0x4a, 0x7e, 0x92, 0xa4, 0xff, 0x50, 0xfc, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xfd, 0x54, 0xa9, 0x7c, 0x49, 0xf2, 0x6d, 0x82, 0xfa, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xfa, 0x45, 0x25, 0x7b, 0x92, 0x34, 0x49, 0x2a, 0xc0, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0xfc, 0x94, 0x54, 0x3c, 0x25, 0x49, 0x22, 0x41, 0x15, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0xf5, 0x29, 0x45, 0x7d, 0x49, 0x9a, 0x48, 0x14, 0x44, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0xf2, 0x55, 0xaa, 0x3e, 0x92, 0x3c, 0x25, 0x49, 0x11, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0xea, 0xa5, 0x24, 0xbe, 0x2a, 0x59, 0x44, 0x22, 0x52, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0xf2, 0x4b, 0x49, 0x39, 0xa2, 0x3d, 0x29, 0x49, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xe5, 0x97, 0xaa, 0xfa, 0xe4, 0x7f, 0x42, 0x12, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xea, 0x2f, 0x49, 0x7a, 0xfd, 0xf5, 0x14, 0x49, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xea, 0x5f, 0x95, 0xfa, 0x3d, 0x80, 0x24, 0x11, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x5f, 0x52, 0xfc, 0x1f, 0x00, 0x4b, 0x4a, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x7f, 0x55, 0xe5, 0x0f, 0x00, 0x92, 0x90, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xff, 0xa4, 0xe8, 0x07, 0x00, 0x26, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0xfe, 0x29, 0xe5, 0x03, 0x0f, 0x48, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0xfa, 0xa7, 0xca, 0x83, 0x1f, 0x94, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xe5, 0x3f, 0xe9, 0x83, 0x3f, 0x58, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0xf5, 0x7f, 0xca, 0x83, 0x3f, 0x8c, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xca, 0xff, 0xd3, 0xc3, 0x3f, 0x98, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0xfd, 0xaf, 0x83, 0x1f, 0x28, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xf5, 0xff, 0x03, 0x1f, 0x2c, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0xd4, 0xff, 0x03, 0x04, 0xbc, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0xfe, 0x0f, 0x00, 0xfc, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0xfa, 0x0f, 0x00, 0xff, 0x4f, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0xea, 0x1f, 0x00, 0xfb, 0x5f, 0x52 }; vigor-0.016.orig/vigor/vigor_ent_0003.xbm0100644000076400007640000003120107103707230016556 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0003_width 128 #define vigor_ent_0003_height 128 static char vigor_ent_0003_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0x29, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0x44, 0x05, 0x02, 0x81, 0x48, 0x21, 0x22, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0x94, 0xa8, 0x28, 0x15, 0x08, 0x04, 0x44, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0x42, 0x42, 0x42, 0xa0, 0xa2, 0x50, 0x00, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0x48, 0x4a, 0x14, 0x05, 0x04, 0x02, 0x29, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0x8a, 0x88, 0x42, 0xa8, 0x50, 0x54, 0x00, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0x29, 0x29, 0x94, 0x02, 0x82, 0x00, 0x4a, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0x42, 0x42, 0x41, 0xa8, 0x14, 0x52, 0x00, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0x4a, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x52, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x24, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x08, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x49, 0x8a, 0x42, 0xe1, 0x7f, 0x51, 0x41, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0x24, 0x11, 0x14, 0xfe, 0xff, 0x07, 0x04, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0x49, 0x52, 0xa1, 0xff, 0xff, 0x9f, 0x50, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0x92, 0x24, 0xca, 0xff, 0xff, 0x7f, 0x02, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0xa4, 0xf0, 0x3f, 0xa0, 0xff, 0x4a, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0x24, 0x09, 0xfd, 0x4f, 0x15, 0xff, 0x21, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x49, 0x52, 0xfe, 0x08, 0x40, 0xfc, 0x07, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0x25, 0x89, 0x7f, 0x52, 0x95, 0xe8, 0x57, 0x08, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0x29, 0xa9, 0x5f, 0x82, 0x10, 0xd1, 0x0f, 0x81, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xa2, 0xc4, 0x9f, 0x14, 0x45, 0x84, 0x5f, 0x14, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0x0a, 0xe9, 0x27, 0x51, 0x10, 0xa9, 0xbf, 0x20, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0x54, 0xd2, 0x93, 0x84, 0x4a, 0x00, 0x7e, 0x82, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0x91, 0xf2, 0x13, 0x29, 0x88, 0xaa, 0xfc, 0x14, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0x2a, 0xf2, 0x25, 0x42, 0x51, 0x00, 0xfd, 0x01, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0x44, 0xfa, 0xa4, 0x14, 0x85, 0x2a, 0xf0, 0xab, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x7c, 0x09, 0x49, 0x28, 0x40, 0xe5, 0x07, 0x1e, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0x2a, 0x7d, 0x52, 0x92, 0x42, 0x15, 0xc8, 0x5f, 0x41, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x7e, 0x49, 0x49, 0x14, 0xa2, 0xa2, 0x1f, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x7e, 0x12, 0x11, 0xa1, 0x08, 0x88, 0xbf, 0x41, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x3d, 0x49, 0x4a, 0x0a, 0xf5, 0xa2, 0xff, 0x0b, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0x5f, 0x92, 0x90, 0xd0, 0xff, 0xef, 0xff, 0x21, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0x5e, 0x49, 0x4a, 0xca, 0xff, 0xff, 0xc1, 0x93, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0x1e, 0x4a, 0x49, 0xfa, 0xff, 0x3f, 0x00, 0x03, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xbf, 0x28, 0x92, 0xfc, 0x97, 0x3f, 0x00, 0x2e, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xbe, 0xa2, 0x24, 0xff, 0x22, 0x0e, 0x04, 0x8c, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0x5e, 0x8a, 0x92, 0xbf, 0x48, 0x1f, 0x1e, 0x1c, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0x9e, 0x28, 0x92, 0x3f, 0x49, 0x0e, 0x3f, 0x7c, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0x3f, 0xa5, 0xa4, 0x9f, 0x84, 0x0e, 0x7f, 0x78, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x5d, 0x09, 0xc9, 0x27, 0x29, 0x8e, 0x7f, 0xf8, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0x49, 0x3e, 0x55, 0xd2, 0x8f, 0x44, 0x8e, 0x7f, 0xf8, 0x11, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0x7d, 0xa2, 0xe4, 0x2b, 0x91, 0x0e, 0x3e, 0xfc, 0x53, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0x8a, 0x7e, 0x49, 0xe9, 0x45, 0x4a, 0x1e, 0x1e, 0xec, 0x07, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0x7a, 0x2a, 0xf2, 0x95, 0x48, 0x0e, 0x00, 0xe4, 0x2f, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0xfc, 0x44, 0xe5, 0x21, 0x91, 0x3c, 0x00, 0x8e, 0x9f, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0xf9, 0x29, 0xe9, 0x4a, 0x92, 0x7e, 0x80, 0x4b, 0x3f, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0xf5, 0x4b, 0xfa, 0x29, 0xc9, 0xff, 0xcb, 0x27, 0x7e, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0xf2, 0x53, 0xf9, 0x42, 0x72, 0xe9, 0xff, 0x8f, 0xfe, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xe5, 0x27, 0xf2, 0x95, 0xe4, 0xa4, 0xbf, 0x3f, 0xf8, 0x2b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0xca, 0xaf, 0xf4, 0xff, 0xeb, 0x24, 0x0a, 0x3f, 0xf5, 0x23, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0xd4, 0xbf, 0xe2, 0x7f, 0x7f, 0x92, 0x50, 0xfc, 0xf0, 0x8f, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0x3f, 0xea, 0x0f, 0x7c, 0x22, 0x05, 0xfd, 0xe2, 0x0f, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0x7f, 0xd1, 0x03, 0x60, 0x49, 0xa8, 0xf0, 0x89, 0x9f, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0xfc, 0xe5, 0x01, 0xc0, 0x92, 0x22, 0xea, 0x43, 0x3f, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0xfd, 0xe9, 0x01, 0x80, 0x44, 0x44, 0xd1, 0x17, 0x7e, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0xf9, 0xeb, 0xc0, 0x80, 0x94, 0x14, 0xc2, 0xaf, 0xfc, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xea, 0xf7, 0xe0, 0x83, 0x21, 0xa1, 0x14, 0x1f, 0xf9, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xca, 0x7f, 0xf0, 0x07, 0x4b, 0x8a, 0xa0, 0x3e, 0xf4, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x94, 0x7f, 0xf0, 0x0f, 0x25, 0x11, 0x05, 0x7d, 0xe9, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0x52, 0x7f, 0xf8, 0x07, 0x49, 0x52, 0x54, 0xf8, 0xd1, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x7e, 0xf0, 0x07, 0x93, 0x84, 0x82, 0xf2, 0x85, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xa4, 0x7e, 0xe0, 0x83, 0x25, 0x29, 0x28, 0xe2, 0x53, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0x95, 0xfa, 0xc0, 0x81, 0x49, 0x92, 0x42, 0xd4, 0x07, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0x54, 0xfa, 0x00, 0x80, 0x92, 0xa4, 0x94, 0xd0, 0x5f, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xa5, 0xf4, 0x01, 0xc0, 0x49, 0x12, 0x49, 0x82, 0x1f, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xfd, 0x03, 0x60, 0x92, 0x24, 0x49, 0x2a, 0x7e, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0x94, 0xfe, 0x0b, 0xe4, 0x25, 0x49, 0x22, 0x41, 0x7d, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x55, 0x29, 0x3f, 0xfd, 0x49, 0x92, 0x48, 0x14, 0xfc, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0x52, 0x55, 0xfe, 0xff, 0x93, 0x24, 0x25, 0x49, 0xf1, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xa5, 0xfc, 0xea, 0x2f, 0x49, 0x44, 0x22, 0xd2, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x52, 0x4a, 0xf9, 0xe9, 0xaf, 0x24, 0x29, 0x49, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0x94, 0xfa, 0xa3, 0x3f, 0x49, 0x42, 0x12, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0xe9, 0x2f, 0xbf, 0x92, 0x14, 0x49, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x52, 0xd5, 0x4f, 0x7f, 0xa4, 0x24, 0x11, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x54, 0xd2, 0x9f, 0xfe, 0x0a, 0x49, 0x4a, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x3f, 0xf9, 0x51, 0x92, 0x90, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xa4, 0xfe, 0xf4, 0x97, 0x24, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0x2a, 0x29, 0xfd, 0xe9, 0x27, 0x49, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0x52, 0xa5, 0xfa, 0xc5, 0x5f, 0x92, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xa5, 0x2a, 0xf9, 0xab, 0x9f, 0x52, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0xea, 0x4f, 0x3f, 0x8a, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xa5, 0xd2, 0x4f, 0xfe, 0x90, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0xaa, 0x9f, 0xfe, 0x2a, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xa5, 0x12, 0x7f, 0xfa, 0x23, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x54, 0xaa, 0xfe, 0xfa, 0x97, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0x4a, 0xfd, 0xe8, 0x97, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0x52, 0xfd, 0xe5, 0x2f, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x2a, 0xf9, 0xcb, 0x3f, 0x49, 0x52 }; vigor-0.016.orig/vigor/vigor_ent_0004.xbm0100644000076400007640000003120107103707230016557 0ustar cjw44cjw44/* Vigor entrance */ #define vigor_ent_0004_width 128 #define vigor_ent_0004_height 128 static char vigor_ent_0004_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x01, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x14, 0x20, 0x24, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x80, 0x00, 0x00, 0x49, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0x20, 0x09, 0x09, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0x05, 0x20, 0x20, 0x24, 0x00, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x48, 0x02, 0x02, 0x00, 0x22, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x00, 0x48, 0x90, 0x48, 0x00, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x92, 0x00, 0x01, 0x00, 0x84, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0x88, 0x08, 0x12, 0x44, 0x82, 0x20, 0x00, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0x11, 0x40, 0x40, 0x08, 0x10, 0x00, 0x12, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0x44, 0x09, 0x09, 0x40, 0x04, 0x01, 0x80, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0x08, 0x21, 0x80, 0x04, 0x00, 0x48, 0x00, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x10, 0x22, 0x84, 0x12, 0x90, 0x48, 0x02, 0x02, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0x52, 0x80, 0x10, 0x20, 0x01, 0x01, 0x00, 0x48, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0x80, 0x4a, 0x42, 0x02, 0x04, 0x08, 0x24, 0x00, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0x15, 0x08, 0x08, 0xa4, 0x90, 0x90, 0x00, 0x01, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xa0, 0xa0, 0xa2, 0x00, 0x04, 0x00, 0x08, 0x24, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0x05, 0x05, 0x04, 0x94, 0x40, 0x22, 0x41, 0x00, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0x28, 0x28, 0x91, 0x00, 0x0a, 0x08, 0x08, 0x20, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0x42, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0x04, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0x08, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0x00, 0x10, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x52, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0x20, 0x01, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0x88, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0x02, 0x00, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x11, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0x44, 0x48, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0x28, 0xa2, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0x00, 0x01, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0x42, 0x0a, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0x08, 0x00, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x50, 0x85, 0x2a, 0xff, 0x57, 0x00, 0x00, 0x20, 0x12, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x11, 0x05, 0x10, 0xf8, 0xff, 0x7f, 0x4a, 0x12, 0x02, 0x40, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0x4a, 0xa8, 0x4a, 0xff, 0xff, 0xff, 0x00, 0x40, 0x20, 0x02, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0x90, 0x22, 0x90, 0xff, 0xf7, 0xff, 0x93, 0x84, 0x04, 0x08, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0x22, 0x44, 0xc5, 0x3f, 0x11, 0xfd, 0x0f, 0x10, 0x20, 0x20, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xa4, 0x14, 0xf0, 0xaf, 0x22, 0xf4, 0x4f, 0x02, 0x04, 0x01, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0x09, 0xa1, 0xfa, 0x01, 0x88, 0xd2, 0x1f, 0x50, 0x20, 0x04, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0x52, 0x8a, 0xfc, 0x55, 0x11, 0x00, 0x7f, 0x82, 0x04, 0x48, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0x89, 0x10, 0x7f, 0x00, 0x44, 0xa5, 0x3e, 0x10, 0x50, 0x00, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0x92, 0x52, 0x9f, 0xaa, 0x08, 0x04, 0xfc, 0x02, 0x81, 0x08, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0x49, 0x84, 0x1f, 0x00, 0x21, 0x51, 0xf9, 0x28, 0x00, 0x40, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0x12, 0xe9, 0x5f, 0x55, 0x24, 0x02, 0xf8, 0x80, 0x94, 0x04, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xa4, 0xc4, 0x07, 0x02, 0x81, 0x48, 0xe1, 0x23, 0x00, 0x90, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0x89, 0xd4, 0xab, 0x28, 0x15, 0x08, 0xe4, 0x45, 0x22, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0x52, 0xe2, 0x43, 0x42, 0xa0, 0xa2, 0xf0, 0x03, 0x08, 0x10, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0x8a, 0xe8, 0x4b, 0x14, 0x05, 0x04, 0xc2, 0x2b, 0x41, 0x22, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0x50, 0xfa, 0x89, 0x42, 0xa8, 0x50, 0xd4, 0x07, 0x08, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0x12, 0xf9, 0x29, 0x94, 0x02, 0x82, 0x80, 0x4f, 0x91, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0x4a, 0xf2, 0x42, 0x41, 0xa8, 0x14, 0xd2, 0x07, 0x00, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0x51, 0xfa, 0x14, 0x8a, 0x82, 0x40, 0x82, 0x5f, 0x92, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0x8a, 0x7c, 0xa1, 0x28, 0x14, 0x2a, 0x08, 0x0f, 0x00, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0x29, 0x79, 0x8a, 0x42, 0xa1, 0x40, 0x51, 0x5f, 0x55, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0x92, 0xfc, 0x11, 0x14, 0x0a, 0x0e, 0x04, 0x1e, 0x00, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0x24, 0xf9, 0x52, 0xa1, 0xe0, 0xff, 0x91, 0x5e, 0x92, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0x49, 0xfa, 0x24, 0x0a, 0xfd, 0xff, 0x47, 0x3e, 0x00, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0x92, 0xfa, 0xa4, 0x50, 0xff, 0xff, 0x0f, 0x7e, 0x95, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0x55, 0xf4, 0x09, 0x85, 0xff, 0xff, 0x2f, 0x7c, 0x00, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0x44, 0x79, 0x52, 0xd4, 0x1f, 0xc0, 0x5f, 0x7d, 0x52, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0x2a, 0xf5, 0x89, 0xe2, 0x57, 0x95, 0xff, 0xff, 0x7c, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0x21, 0xf9, 0x29, 0xfa, 0x87, 0x10, 0xfd, 0xff, 0xc5, 0x02, 0x12, 0x08, 0x55, 0x55, 0xa5, 0x44, 0x56, 0xf2, 0x45, 0xf1, 0x15, 0x45, 0x3c, 0xe0, 0x16, 0x28, 0x40, 0x00, 0x49, 0x29, 0x29, 0xa9, 0x44, 0xea, 0x29, 0xf4, 0x51, 0x10, 0x1f, 0x80, 0x27, 0x01, 0x09, 0x22, 0xaa, 0x4a, 0x55, 0x95, 0xaa, 0xf4, 0x93, 0xfe, 0x84, 0x4a, 0x1e, 0x00, 0x83, 0x48, 0x40, 0x08, 0x2a, 0x55, 0x4a, 0xa5, 0x10, 0xd1, 0x53, 0x7e, 0x29, 0x88, 0x07, 0x04, 0x17, 0x09, 0x89, 0x00, 0x55, 0xa9, 0x92, 0x14, 0xab, 0xea, 0x83, 0x3c, 0x42, 0x51, 0x87, 0x1f, 0x02, 0x20, 0x00, 0x12, 0x55, 0xa5, 0xaa, 0x52, 0x92, 0xc4, 0xaf, 0xbc, 0x14, 0x85, 0xc3, 0x1f, 0xaa, 0x84, 0x52, 0x20, 0x52, 0x95, 0x94, 0x54, 0x29, 0xa9, 0x07, 0x3d, 0x49, 0xa8, 0xc7, 0x1f, 0x04, 0x12, 0x00, 0x02, 0x2a, 0x55, 0xa5, 0x4a, 0x4a, 0xaa, 0x5f, 0xfe, 0x93, 0xc2, 0xc3, 0x3f, 0x56, 0x40, 0x4a, 0x24, 0x55, 0xa9, 0x94, 0x94, 0x54, 0x91, 0x2f, 0xff, 0x4f, 0x94, 0x83, 0x3f, 0x0e, 0x25, 0x00, 0x00, 0x55, 0x95, 0xaa, 0x52, 0x91, 0x52, 0x4f, 0xbf, 0x3f, 0xfd, 0x87, 0x1f, 0x2e, 0x40, 0x92, 0x24, 0x52, 0x55, 0x95, 0x94, 0x2a, 0x25, 0x3f, 0x0f, 0x70, 0xee, 0x07, 0x07, 0x8e, 0x0a, 0x41, 0x00, 0x95, 0x52, 0x52, 0x55, 0x4a, 0x49, 0xdf, 0x07, 0xe0, 0x56, 0x0f, 0x00, 0x3f, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xaa, 0xa4, 0x94, 0x12, 0xfe, 0x01, 0xc0, 0x8b, 0x1e, 0x80, 0x9f, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0x95, 0x4a, 0xa5, 0xd4, 0xfc, 0x01, 0x80, 0x23, 0x5e, 0xc0, 0x3f, 0x02, 0x04, 0x25, 0x55, 0x55, 0x52, 0x55, 0x4a, 0x25, 0xfd, 0x80, 0x03, 0x95, 0xfa, 0x72, 0x7c, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0x94, 0x14, 0x49, 0xfa, 0xe0, 0x07, 0x21, 0xf2, 0x3f, 0x7d, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xa9, 0xaa, 0xaa, 0xfa, 0xe0, 0x07, 0x96, 0xc8, 0xbf, 0x78, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x52, 0x52, 0x92, 0xfc, 0xf0, 0x0f, 0x23, 0x49, 0x7c, 0x7c, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xaa, 0xa4, 0x24, 0xf9, 0xf0, 0x0f, 0x97, 0x84, 0x7a, 0xf9, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xa5, 0x4a, 0x55, 0x77, 0xe0, 0x07, 0x23, 0x29, 0xfa, 0xf5, 0x41, 0x85, 0x10, 0x55, 0x55, 0x29, 0x95, 0x2a, 0xc9, 0xfe, 0xe0, 0x07, 0x8b, 0x44, 0xf4, 0xf8, 0x0b, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0xa9, 0x52, 0xf1, 0x80, 0x01, 0x29, 0x91, 0xf4, 0xf1, 0xa1, 0x52, 0x24, 0x55, 0x55, 0x55, 0x95, 0x52, 0xca, 0xca, 0x01, 0x80, 0x45, 0x4a, 0xf2, 0xe3, 0x0b, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x35, 0xca, 0x03, 0xc0, 0x94, 0x48, 0xe4, 0xeb, 0xa3, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0x55, 0xc2, 0xd4, 0x07, 0x40, 0x21, 0x91, 0xe8, 0xd3, 0x0b, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x1a, 0xd1, 0x0f, 0x70, 0x4a, 0x92, 0xc2, 0xe3, 0x4f, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0x2a, 0x65, 0x95, 0xff, 0x3f, 0x29, 0x49, 0xd4, 0xc7, 0x27, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0x55, 0x4a, 0x52, 0xff, 0x5f, 0x42, 0x12, 0x89, 0x97, 0x8f, 0x8a, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0xa5, 0x2f, 0x9f, 0x94, 0xa4, 0xa4, 0xa7, 0x2f, 0x20, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x8a, 0xbf, 0x5e, 0x25, 0x89, 0xa4, 0x0f, 0x2f, 0x45, 0x20, 0x55, 0x55, 0x55, 0x4a, 0x25, 0xa5, 0x54, 0xbe, 0x3e, 0x94, 0x24, 0x92, 0x5f, 0x9f, 0x10, 0x89, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xa9, 0x3e, 0xbe, 0x22, 0x49, 0x22, 0x1f, 0x1f, 0x22, 0x01, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x25, 0x7d, 0xfd, 0x94, 0x24, 0x49, 0xbe, 0x7e, 0x09, 0x94, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x55, 0x7c, 0xfd, 0x24, 0x49, 0x92, 0x3e, 0x3e, 0x40, 0x11, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x52, 0x7d, 0xf9, 0x52, 0x92, 0x44, 0x7e, 0x7d, 0x15, 0x44, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4a, 0x79, 0xfa, 0x8a, 0x92, 0x94, 0x3c, 0x7a, 0xa0, 0x08, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x94, 0xfa, 0xf2, 0x51, 0x24, 0x21, 0xfd, 0x7c, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xfa, 0xfa, 0x4b, 0x49, 0x4a, 0xfa, 0xf8, 0x28, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0xf4, 0xf4, 0x93, 0x92, 0x24, 0x79, 0xf5, 0x45, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x94, 0xf2, 0xe5, 0x57, 0x24, 0x49, 0xf2, 0xf4, 0x09, 0x51, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x52, 0xf5, 0xe9, 0x93, 0x4a, 0x92, 0xf4, 0xe2, 0x53, 0x04, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x95, 0xe4, 0xcb, 0x57, 0x92, 0x24, 0xf9, 0xe9, 0x83, 0x50, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x55, 0xd5, 0xd3, 0x27, 0x29, 0x49, 0xf2, 0xe3, 0x17, 0x05, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xd4, 0xaf, 0x4f, 0x4a, 0x92, 0xe4, 0xd7, 0x53, 0x50, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x55, 0xa5, 0xd7, 0xaf, 0x50, 0x49, 0xd2, 0xc9, 0x83, 0x0a, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xca, 0x47, 0x2f, 0x4b, 0x92, 0xa4, 0xc9, 0x2b, 0x40, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x92, 0x94, 0x9f, 0x5f, 0x24, 0x25, 0x49, 0xe3, 0x43, 0x15, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0x55, 0x2f, 0x5f, 0x49, 0x49, 0x92, 0xc8, 0x17, 0x44, 0xd5, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0x52, 0x5f, 0xbe, 0x12, 0x92, 0x24, 0xe5, 0x4b, 0x11, 0xad, 0xda, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xbf, 0x3e, 0xaa, 0x2a, 0x49, 0xc4, 0x23, 0x52, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x52, 0x5e, 0x7d, 0x29, 0xa2, 0x24, 0xe9, 0x4f, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0xbc, 0xfe, 0xa2, 0x24, 0x49, 0xc2, 0x13, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x3e, 0x79, 0x2a, 0x95, 0x92, 0xd4, 0x4b, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0x7e, 0xfd, 0x4a, 0x51, 0xa4, 0xe4, 0x13, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x7c, 0xfa, 0x94, 0x8a, 0x0a, 0xe9, 0x4b, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0xfa, 0xf5, 0x25, 0x29, 0x51, 0xf2, 0x91, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xf9, 0xf4, 0xa9, 0xa4, 0x94, 0xf4, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x95, 0xfa, 0xe9, 0x25, 0x29, 0x25, 0xf9, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xaa, 0xa4, 0xf2, 0xe5, 0x4b, 0x45, 0x52, 0xfe, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xa5, 0x2a, 0xe5, 0xea, 0x2f, 0xa9, 0x94, 0x7e, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x55, 0x55, 0xd2, 0x4f, 0x4a, 0x21, 0xbf, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0xa5, 0x7f, 0x49, 0xaa, 0x9f, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0xbe, 0x92, 0xf2, 0x2f, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x29, 0xa5, 0xfe, 0xd7, 0xfe, 0x23, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x54, 0xfe, 0xff, 0xff, 0x95, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xaa, 0x52, 0x95, 0xfa, 0xff, 0xff, 0x92, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0x55, 0x95, 0x52, 0xd2, 0xff, 0x3f, 0x29, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x2a, 0xff, 0x4d, 0x22, 0x49, 0x52 }; vigor-0.016.orig/vigor/vigor_wav_0002.xbm0100644000076400007640000003117707103707230016600 0ustar cjw44cjw44/* Vigor waving */ #define vigor_wav_0002_width 128 #define vigor_wav_0002_height 128 static char vigor_wav_0002_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xe0, 0xff, 0x13, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0xe2, 0xff, 0x83, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0xc8, 0xff, 0xff, 0xff, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0xff, 0xff, 0xff, 0x00, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0xfc, 0xff, 0xff, 0xff, 0x4f, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0xfc, 0xff, 0xff, 0xff, 0x0f, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x80, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0xf9, 0xff, 0x1f, 0x02, 0xfe, 0xff, 0x07, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0xf8, 0xff, 0x5f, 0x90, 0xfe, 0xff, 0x23, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0xfe, 0xbf, 0x00, 0x01, 0x80, 0xff, 0x07, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0x44, 0xfc, 0x3f, 0x12, 0x44, 0x82, 0xff, 0x07, 0x00, 0x00, 0x00, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x08, 0xff, 0x47, 0x40, 0x08, 0x10, 0xfc, 0x1f, 0x04, 0x02, 0x01, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x22, 0xff, 0x0f, 0x09, 0x40, 0x04, 0xfd, 0x8f, 0x00, 0x20, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x84, 0xff, 0x21, 0x80, 0x04, 0x00, 0xe8, 0x3f, 0x20, 0x00, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x82, 0x90, 0xff, 0x84, 0x12, 0x90, 0x48, 0xf2, 0x3f, 0x04, 0x00, 0x04, 0x51, 0x8a, 0x92, 0x22, 0x28, 0xf2, 0xbf, 0x10, 0x20, 0x01, 0x01, 0xc0, 0x7f, 0x00, 0x02, 0x00, 0x8a, 0x24, 0x44, 0x44, 0x85, 0xf0, 0x5f, 0x42, 0x02, 0x04, 0x08, 0xa4, 0xff, 0x20, 0x20, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0x28, 0xf5, 0x1f, 0x08, 0xa4, 0x90, 0x90, 0x80, 0xff, 0x02, 0x00, 0x00, 0x85, 0x92, 0x20, 0xa1, 0x82, 0xf0, 0xa7, 0xa2, 0x00, 0x04, 0x00, 0x08, 0xff, 0x40, 0x04, 0x02, 0x29, 0x24, 0x25, 0x0a, 0x14, 0xf5, 0x07, 0x04, 0x94, 0x40, 0x22, 0x41, 0xff, 0x00, 0x00, 0x00, 0x4a, 0x49, 0x92, 0x50, 0x21, 0xfc, 0x2b, 0x91, 0x00, 0x0a, 0x08, 0x08, 0xfe, 0x09, 0x10, 0x08, 0x51, 0x92, 0x24, 0x45, 0xa4, 0xfe, 0x01, 0x22, 0x52, 0x20, 0x41, 0x80, 0xfc, 0x83, 0x00, 0x00, 0x8a, 0x24, 0x49, 0x88, 0x02, 0xfe, 0x2a, 0x88, 0x00, 0x02, 0x10, 0x11, 0xf8, 0x13, 0x20, 0x00, 0x29, 0x25, 0x49, 0x29, 0xaa, 0x7e, 0x40, 0x11, 0x4a, 0x48, 0x02, 0x82, 0xf0, 0x03, 0x02, 0x01, 0x52, 0x94, 0x24, 0x45, 0x10, 0xfe, 0x0a, 0x44, 0x00, 0x21, 0x20, 0x20, 0xf2, 0x03, 0x00, 0x08, 0x44, 0x21, 0x49, 0x48, 0x45, 0x7f, 0xa0, 0x08, 0x29, 0x84, 0x04, 0x04, 0xf4, 0x49, 0x10, 0x00, 0x95, 0x4a, 0x22, 0x25, 0xa8, 0xff, 0x0a, 0x22, 0x84, 0x20, 0x50, 0x00, 0xf8, 0x07, 0x02, 0x00, 0x52, 0x54, 0x8a, 0x88, 0xc2, 0x7f, 0x50, 0xa0, 0x90, 0x04, 0x82, 0xa4, 0xf8, 0x03, 0x20, 0x11, 0xa4, 0x82, 0x54, 0x52, 0x94, 0x5f, 0x85, 0x0a, 0x02, 0x52, 0x00, 0x00, 0xf0, 0x13, 0x00, 0x00, 0x4a, 0x2a, 0x91, 0x44, 0x91, 0x1f, 0x10, 0x40, 0x48, 0x40, 0x4a, 0x12, 0xf2, 0x43, 0x02, 0x00, 0x92, 0x54, 0x4a, 0x12, 0xca, 0xbf, 0x4a, 0x15, 0x21, 0x02, 0x00, 0x40, 0xf0, 0x03, 0x10, 0x01, 0x24, 0x45, 0x91, 0xa4, 0xd0, 0x3f, 0x10, 0x20, 0x45, 0x48, 0x92, 0x84, 0xf4, 0x0f, 0x00, 0x10, 0x55, 0x28, 0x4a, 0x92, 0xe2, 0x5f, 0x45, 0x05, 0x10, 0x21, 0x08, 0x10, 0xf0, 0x27, 0x21, 0x02, 0x92, 0xa5, 0x92, 0x24, 0xe4, 0x1f, 0x10, 0xa8, 0x22, 0x04, 0x41, 0x02, 0xe4, 0x07, 0x02, 0x00, 0x2a, 0x4a, 0x24, 0x49, 0xc9, 0xaf, 0x4a, 0x01, 0x88, 0x52, 0x14, 0x50, 0xe0, 0x07, 0x00, 0x08, 0xa2, 0x48, 0x49, 0x49, 0xd2, 0x8f, 0x10, 0x55, 0x11, 0x00, 0x40, 0x82, 0xe4, 0x4b, 0x90, 0x00, 0xaa, 0x92, 0x12, 0x25, 0xc9, 0x1f, 0x45, 0x00, 0x44, 0xa5, 0x04, 0x10, 0xf0, 0x03, 0x01, 0x10, 0x4a, 0x2a, 0x54, 0x48, 0xd2, 0x5f, 0x88, 0xaa, 0x08, 0x04, 0xa8, 0x02, 0xf1, 0x0b, 0x04, 0x01, 0x94, 0x52, 0x49, 0x25, 0xc9, 0x8f, 0x12, 0x00, 0x21, 0x51, 0x01, 0x28, 0xf0, 0x43, 0x10, 0x20, 0x52, 0x92, 0x2a, 0x49, 0xd2, 0x2f, 0x50, 0x55, 0x24, 0x02, 0x88, 0x80, 0xf4, 0x05, 0x00, 0x02, 0x4a, 0x25, 0x41, 0x92, 0xe4, 0x4f, 0x05, 0x02, 0xfd, 0x5f, 0x21, 0x22, 0xf0, 0x91, 0x10, 0x00, 0x94, 0x54, 0x9a, 0x24, 0xc9, 0x9f, 0xa8, 0x28, 0xfd, 0x1f, 0x04, 0x44, 0xfa, 0x01, 0x82, 0x10, 0x29, 0x49, 0xa5, 0x4a, 0xd2, 0x4f, 0x42, 0xc2, 0xff, 0xff, 0x51, 0x00, 0xf8, 0x11, 0x10, 0x04, 0xaa, 0x92, 0x24, 0x51, 0xca, 0x4f, 0x4a, 0xfc, 0xff, 0xff, 0x0f, 0x29, 0xf9, 0x23, 0x01, 0x00, 0x49, 0x55, 0x4a, 0x8a, 0xd0, 0x8f, 0x88, 0xfa, 0xff, 0xff, 0x5f, 0x00, 0xf8, 0x00, 0x48, 0x10, 0x2a, 0x49, 0x49, 0xa9, 0xd2, 0x2f, 0x29, 0xfe, 0xff, 0xff, 0x1f, 0x4a, 0xf9, 0x24, 0x01, 0x02, 0x52, 0x92, 0x94, 0x44, 0xca, 0x47, 0xc2, 0xff, 0xaf, 0xfc, 0x7f, 0x00, 0xfc, 0x00, 0x48, 0x10, 0xa5, 0x2a, 0x25, 0x49, 0xd1, 0x4f, 0x94, 0xff, 0x87, 0xf8, 0xff, 0x52, 0xfe, 0x44, 0x00, 0x00, 0x4a, 0x55, 0xaa, 0x2a, 0xca, 0x27, 0xc1, 0x7f, 0x14, 0x2a, 0xff, 0x08, 0x7c, 0x10, 0x91, 0x24, 0x94, 0xa4, 0x22, 0x49, 0xe9, 0x4f, 0xca, 0x4f, 0xa1, 0x40, 0xf9, 0x41, 0x7d, 0x02, 0x02, 0x00, 0x55, 0x49, 0x94, 0x24, 0xd2, 0x27, 0xe1, 0x17, 0x0a, 0x0a, 0xf4, 0x07, 0x7c, 0x10, 0x20, 0x00, 0x95, 0xaa, 0x2a, 0xa9, 0xe4, 0x4f, 0xf2, 0xa3, 0xa0, 0x50, 0xf1, 0x51, 0xfe, 0x42, 0x84, 0x2a, 0x52, 0x49, 0x51, 0x25, 0xc9, 0x97, 0xf4, 0x0b, 0x15, 0x05, 0xe4, 0x03, 0x7e, 0x08, 0x01, 0x00, 0x55, 0x2a, 0x95, 0xa4, 0xd2, 0x97, 0xfc, 0x51, 0x20, 0xa0, 0xe8, 0x4b, 0xbf, 0x10, 0x24, 0x00, 0x4a, 0x55, 0x29, 0x15, 0xd5, 0xa7, 0xff, 0x85, 0x4a, 0x15, 0xc2, 0x23, 0x3e, 0x42, 0x80, 0x24, 0xa9, 0x92, 0x52, 0x52, 0xc4, 0xcf, 0xff, 0x95, 0x08, 0x40, 0xc4, 0x07, 0x7e, 0x04, 0x12, 0x00, 0x4a, 0x2a, 0xa5, 0xa4, 0xea, 0xc7, 0xff, 0x27, 0x52, 0x95, 0xc8, 0x7f, 0x3f, 0x90, 0x80, 0x44, 0xaa, 0xa4, 0x94, 0x2a, 0xe1, 0xff, 0x03, 0x5f, 0x82, 0x10, 0xf9, 0xff, 0xbf, 0x02, 0x12, 0x08, 0x55, 0x75, 0xa5, 0x44, 0xd6, 0x7f, 0x00, 0xb8, 0x14, 0x45, 0x7e, 0xe0, 0x1f, 0x28, 0x40, 0x00, 0x49, 0x79, 0x29, 0xa9, 0xc4, 0x7f, 0x00, 0x38, 0x51, 0x10, 0x3e, 0xe0, 0x3f, 0x01, 0x09, 0x22, 0xaa, 0xfa, 0x55, 0x95, 0xea, 0x0f, 0x00, 0xe0, 0x84, 0x4a, 0x0f, 0x80, 0x9f, 0x48, 0x40, 0x08, 0x2a, 0xf5, 0x4f, 0xa5, 0xd0, 0x0f, 0x00, 0xe0, 0x29, 0xc8, 0x03, 0x00, 0x1f, 0x09, 0x89, 0x00, 0x55, 0xe9, 0x9f, 0xd4, 0xef, 0x07, 0x00, 0x80, 0x42, 0xf1, 0x01, 0x00, 0x8c, 0x2f, 0x00, 0x12, 0x55, 0xe5, 0xaf, 0xd2, 0xdf, 0x07, 0x00, 0xc0, 0x14, 0xe5, 0x01, 0x00, 0xae, 0x8f, 0x52, 0x20, 0x52, 0x95, 0x9f, 0xf4, 0xfd, 0x07, 0xfc, 0xc0, 0xf9, 0xf9, 0xc0, 0x0f, 0xee, 0x1a, 0x00, 0x02, 0x2a, 0xd5, 0xff, 0x6a, 0xfa, 0x03, 0xff, 0x01, 0x9f, 0x7b, 0xf0, 0x1f, 0x7c, 0x50, 0x4a, 0x24, 0x55, 0xa9, 0xfe, 0x94, 0xf4, 0x03, 0xff, 0x01, 0x4f, 0x7e, 0xf0, 0x1f, 0x1c, 0x25, 0x00, 0x00, 0x55, 0x95, 0xfe, 0x52, 0xd1, 0x03, 0xff, 0x81, 0x13, 0x7d, 0xf0, 0x1f, 0x2c, 0x40, 0x92, 0x24, 0x52, 0x55, 0xfd, 0x94, 0xea, 0x03, 0xff, 0x81, 0x4b, 0x7e, 0xf0, 0x1f, 0x84, 0x0a, 0x41, 0x00, 0x95, 0x52, 0xfa, 0x57, 0xca, 0x03, 0xff, 0x81, 0x91, 0x78, 0xf0, 0x0f, 0x2e, 0x20, 0x08, 0x29, 0xaa, 0xaa, 0xea, 0xa7, 0xd4, 0x03, 0xff, 0x81, 0x4b, 0x3a, 0xf8, 0x0f, 0x86, 0x92, 0x22, 0x00, 0xaa, 0x4a, 0xd5, 0x4f, 0xe5, 0x07, 0xfe, 0xc0, 0x49, 0x7a, 0xe0, 0x07, 0x17, 0x02, 0x04, 0x25, 0x55, 0x55, 0xd2, 0x7f, 0xca, 0x07, 0x00, 0x40, 0x92, 0x74, 0x00, 0x00, 0x43, 0x28, 0x50, 0x80, 0x55, 0xaa, 0xaa, 0xff, 0xd4, 0x0f, 0x00, 0xe0, 0x24, 0xf1, 0x00, 0xc0, 0x17, 0x81, 0x02, 0x12, 0xaa, 0xaa, 0x4a, 0xff, 0xea, 0x0f, 0x00, 0xb0, 0x92, 0xf4, 0x03, 0xe0, 0x43, 0x14, 0x48, 0x08, 0x55, 0x55, 0x95, 0x7e, 0xd2, 0x0f, 0x00, 0x30, 0x92, 0xe2, 0x01, 0xe0, 0x17, 0x41, 0x09, 0x21, 0xaa, 0x4a, 0xaa, 0xfe, 0xe4, 0x7f, 0x00, 0xbc, 0x24, 0xd4, 0x0f, 0xfc, 0x23, 0x14, 0x20, 0x84, 0xaa, 0x54, 0x55, 0xfd, 0xcb, 0xff, 0x81, 0x0f, 0x49, 0xa1, 0xff, 0xff, 0x45, 0x41, 0x85, 0x10, 0x55, 0x55, 0x29, 0xf5, 0xef, 0xef, 0xff, 0x57, 0x92, 0x8a, 0xfe, 0xf7, 0x09, 0x0a, 0x10, 0x02, 0xaa, 0xaa, 0xaa, 0xf4, 0xef, 0xd7, 0x7f, 0xa2, 0x24, 0x28, 0xfd, 0xf4, 0x51, 0xa0, 0x52, 0x24, 0x55, 0x55, 0x55, 0xd5, 0xdf, 0x8f, 0x5f, 0x49, 0x49, 0x45, 0x7e, 0xf2, 0x83, 0x0a, 0x00, 0x91, 0x55, 0x55, 0x55, 0xa9, 0xdf, 0x37, 0x5f, 0x2a, 0x92, 0x94, 0x7c, 0xf4, 0x2a, 0xa0, 0x2a, 0x02, 0xaa, 0xaa, 0xa4, 0x2a, 0xff, 0xc7, 0x9f, 0x44, 0x25, 0x21, 0xfd, 0xf8, 0x90, 0x0a, 0x80, 0x48, 0xaa, 0xaa, 0xaa, 0xaa, 0xfc, 0x1f, 0x5f, 0x29, 0x49, 0x4a, 0xbe, 0xfa, 0x22, 0x48, 0x15, 0x01, 0x55, 0x55, 0x55, 0xa9, 0xfe, 0x67, 0x9f, 0x4a, 0x2a, 0x29, 0x7f, 0xfc, 0x44, 0x21, 0x40, 0x94, 0x55, 0x55, 0x95, 0x4a, 0xfd, 0x4f, 0x5f, 0x52, 0x49, 0x42, 0x3e, 0xf9, 0x14, 0x8a, 0x8a, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xf4, 0x57, 0xbf, 0x24, 0x92, 0x94, 0xbe, 0x7c, 0xa1, 0x20, 0x20, 0x2a, 0x55, 0x55, 0x55, 0x55, 0xf5, 0x57, 0x9f, 0xaa, 0x54, 0x25, 0xbf, 0x7c, 0x0a, 0x25, 0x45, 0x20, 0x55, 0x55, 0x55, 0x4a, 0xe5, 0xa7, 0x5f, 0xa2, 0x22, 0x94, 0x3e, 0xfe, 0x50, 0x90, 0x10, 0x89, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4a, 0xbf, 0x2a, 0xaa, 0x22, 0x5f, 0x7e, 0x05, 0x05, 0x22, 0x01, 0xad, 0xaa, 0xaa, 0x2a, 0x55, 0x55, 0x3f, 0x45, 0x91, 0x94, 0x3e, 0x7d, 0xa8, 0x50, 0x09, 0x94, 0x55, 0x55, 0x55, 0x55, 0x55, 0x29, 0x5f, 0x54, 0xa5, 0x24, 0x5f, 0xbe, 0x22, 0x0a, 0x40, 0x11, 0xaa, 0xaa, 0xaa, 0xaa, 0xa4, 0x52, 0x5f, 0x25, 0x89, 0x52, 0x9f, 0x7e, 0x44, 0x51, 0x15, 0x44, 0x6a, 0x55, 0x55, 0xa9, 0x4a, 0xa6, 0x4f, 0x49, 0x2a, 0x8a, 0x9f, 0xbe, 0x14, 0x42, 0xa0, 0x08, 0xad, 0xaa, 0xaa, 0x4a, 0x55, 0xa9, 0x9f, 0xaa, 0x52, 0x51, 0x3f, 0x3f, 0xa1, 0x14, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x5f, 0x4a, 0x4a, 0x4a, 0x4f, 0x5e, 0x8a, 0xa0, 0x28, 0x44, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaf, 0x94, 0x94, 0x92, 0x9f, 0x3e, 0x11, 0x05, 0x45, 0x09, 0xad, 0xaa, 0xaa, 0xaa, 0x94, 0xaa, 0x9f, 0x52, 0xa5, 0xd4, 0x2f, 0x5f, 0x52, 0x54, 0x08, 0x51, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x5f, 0x95, 0x28, 0x91, 0x4f, 0x9f, 0x84, 0x82, 0x52, 0x04, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x9f, 0xa4, 0x4a, 0xd5, 0x9f, 0x3f, 0x29, 0x28, 0x82, 0x50, 0x55, 0xad, 0xaa, 0xaa, 0x2a, 0x49, 0x5f, 0x95, 0x92, 0xa2, 0x2f, 0x4f, 0x92, 0x42, 0x14, 0x05, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x9f, 0x54, 0x2a, 0xca, 0x4f, 0x9f, 0xa4, 0x94, 0x50, 0x50, 0xad, 0x5a, 0x55, 0x55, 0xa9, 0x2a, 0x5f, 0xa5, 0x54, 0xa9, 0x57, 0x4f, 0x12, 0x49, 0x82, 0x0a, 0xaa, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaf, 0x4a, 0x45, 0xa5, 0xcf, 0x9f, 0x24, 0x49, 0x2a, 0x40, 0xad, 0xaa, 0x56, 0x55, 0x55, 0x55, 0x9f, 0x94, 0x94, 0xd4, 0xa7, 0x2f, 0x49, 0x22, 0x41, 0x15, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x5f, 0x55, 0x29, 0xc5, 0xcf, 0x4f, 0x92, 0x48, 0x14, 0x44, 0xd5, 0x56, 0x55, 0x55, 0x55, 0xd5, 0x9f, 0x52, 0x55, 0xea, 0x93, 0x97, 0x24, 0x25, 0x49, 0x11, 0xad, 0xda, 0x5a, 0x55, 0x55, 0xd5, 0x5f, 0x2a, 0xa5, 0xe4, 0xab, 0x2f, 0x49, 0x44, 0x22, 0x52, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xaf, 0x52, 0x4a, 0xc9, 0xeb, 0xa7, 0x24, 0x29, 0x49, 0x09, 0xdb, 0x56, 0x55, 0x55, 0x55, 0xd5, 0x5f, 0xa5, 0x94, 0xea, 0xe3, 0x27, 0x49, 0x42, 0x12, 0x50, 0xaa, 0xda, 0xda, 0xaa, 0xaa, 0xaa, 0xaf, 0xaa, 0x2a, 0xc9, 0xeb, 0x97, 0x92, 0x14, 0x49, 0x05, 0xb6, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x9f, 0xaa, 0x52, 0x95, 0xca, 0x53, 0xa4, 0x24, 0x11, 0x51, 0x55, 0x55, 0x55, 0x55, 0x55, 0xd5, 0x5f, 0x92, 0x54, 0x52, 0xd4, 0x8b, 0x0a, 0x49, 0x4a, 0x0a, 0xb6, 0xb6, 0xaa, 0xad, 0xaa, 0xaa, 0xbf, 0xaa, 0x4a, 0x55, 0xf5, 0x29, 0x51, 0x92, 0x90, 0x50, 0xd5, 0x6a, 0x5b, 0x55, 0x55, 0x55, 0x5f, 0x55, 0xa9, 0xa4, 0xf8, 0xa4, 0x94, 0x24, 0x25, 0x0a, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x7f, 0x95, 0x2a, 0x29, 0xfd, 0x29, 0x25, 0x49, 0x44, 0x51, 0xd5, 0x56, 0xb5, 0x5a, 0x55, 0x55, 0xbe, 0xa4, 0x52, 0xa5, 0x7a, 0x45, 0x52, 0x92, 0x12, 0x82, 0xad, 0x6d, 0xab, 0x55, 0x55, 0x55, 0xbf, 0x2a, 0xa5, 0x2a, 0x7d, 0xa9, 0x94, 0x52, 0x54, 0x2a, 0xb5, 0xaa, 0xaa, 0x6a, 0x55, 0x55, 0x7d, 0x55, 0x55, 0x52, 0x5f, 0x4a, 0x21, 0x8a, 0x22, 0x89, 0xad, 0xda, 0xb6, 0xaa, 0xaa, 0xaa, 0xfa, 0xab, 0x4a, 0xe5, 0x5f, 0x49, 0xaa, 0x90, 0x48, 0x22, 0x6b, 0xab, 0xaa, 0x55, 0xab, 0xaa, 0xfa, 0x2b, 0x55, 0xf5, 0xaf, 0x92, 0x92, 0x2a, 0x25, 0x49, 0xda, 0xb6, 0xad, 0xb6, 0xaa, 0xaa, 0xea, 0x7f, 0x29, 0xff, 0x13, 0x55, 0x52, 0x22, 0x49, 0x12, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xff, 0xff, 0xff, 0xaa, 0xa4, 0x8a, 0x94, 0x24, 0x49, 0xb6, 0x6d, 0xab, 0xaa, 0xb6, 0xaa, 0xaa, 0xfe, 0xff, 0x9f, 0x4a, 0x89, 0xa8, 0x92, 0x24, 0x49, 0x6d, 0xab, 0xd6, 0xb6, 0xaa, 0x55, 0x55, 0xd5, 0xff, 0x52, 0x52, 0x55, 0x25, 0x29, 0x49, 0x12, 0x55, 0x6d, 0xb5, 0x6a, 0x55, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x2a, 0x29, 0x49, 0x22, 0x49, 0x52 }; vigor-0.016.orig/vigor/vigor_wav_0002.xcf0100644000076400007640000004574707103707231016603 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿsp{u€ `ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ €BB=àpath 0BB’BB’B(B”B,BœB0B¤B0BŠB0BŠB0BŠB BŠB BŠB BŠB$BŽB$BŽB$BŽBB’Ø ñ€€Clipÿ     ˜€€™ 倀µd!· 0ÿ8ÿ4 ÿ5 ÿ5ÿ6ÿ;ÿ þÿ/ÿ þÿ/ÿ þÿ/ÿ þÿ/ÿCÿ6 ÿ3 ÿ0ÿ.ÿ»ÿ:ÿ7ÿ4 ÿ3 ÿ2 ÿ3 ÿ1 ÿ4 ÿ3ÿ6ÿ4ÿ5ÿ6ÿ6ÿ8ÿ6ÿ6ÿ8ÿ8ÿ9ÿ9ÿ7ÿ7ÿ7ÿ9ÿ9ÿ8ÿ8ÿ8ÿ9ÿ9ÿ9ÿ9ÿ9ÿ9ÿ9ÿ9ÿ9ÿþÿ%ÿÿ&ÿÿ&ÿ ÿ&ÿ ÿ&ÿ ÿ&ÿ ÿ&ÿ ÿ)ÿÿ+ÿÿ+ÿÿ,ÿÿ,ÿ ÿ,ÿ ÿ,ÿ ÿþ9ÿ ùÂýCCQÿ ùÂýýCQÿ ø˜ÿÿøÿVVÿ ÷Gúúÿÿúú7ÿ Šÿ8 ÿ4 ÿ3ÿÿ2ÿÿ1ÿÿ1ÿÿ0ÿÿ0ÿÿ1ÿÿ4ÿÿ+ÿÿ,ÿ ÿ,ÿ ÿ† ÿ2 ÿ,ÿ&ÿ&ÿ"ÿ"ÿÿ ÿÿ ÿ4 ÿ3 ÿ6 ÿ4 ÿ8ÿ5 ÿ7ÿ7ÿ6ÿ7ÿ7ÿ8ÿ9ÿ8ÿ9ÿ9ÿ9ÿ9ÿ7ÿ9ÿ9ÿ9ÿ9ÿ8ÿ9ÿ9ÿ:ÿ9ÿ9ÿ9ÿ9ÿ ÿÿ ÿÿÿÿÿÿÿÿÿ ÿÿ ÿ ÿÿ ÿ ÿ&ÿ ÿ*ÿ ÿ+ÿÿ+ÿÿ,ÿÿ,ÿÿ.ÿÿ.ÿÿ.ÿÿ+ÿ)ÿ*ÿ)ÿþÿ ÿ*ÿ+ÿ,ÿÿ+ÿÿ)ÿÿ)ÿÿ*ÿÿ*ÿÿ*ÿÿ+ÿÿ,ÿ-ÿ.ÿ/ÿ2 ÿ6ÿ OÿýÛÿÿ OÿýÛÿÿþnÿÿþ»ÿÿþÿÿþŽÿÿþœÿÿþ­ÿÿþ| ÿý Íÿÿ] ÿý Íÿÿ] ÿü)ììÿÿþ= ÿHÿýáÿþgÿÿþÂÿþ‡ÿÿ¢ÿ¦ÿþƒÿþÆÿÿþdÿýÆÿÿþdÿý"åÿÿþDÿþAÿÿüè%%ÿaÿûÉÿÿ ÿ"þ€ÿÿü©ÿÿÿ&þ ÿÿýŠÿÿÿ)þ¿ÿÿþjÿÿÿ)üÞÞÿÿÿ*;þþÿÿïÿÿ+ý;þÿÿïÿÿ,þZÿÿÿ-þyÿÿÿ.ÿþûÿ/ÿüúÓ˜ÿ2ý3ÿ:ÿ:ÿ:ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ:ÿ:ÿ:ÿ:ÿ:ÿ:ÿ:ÿ;ÿ:ÿ:ÿ:ÿ:ÿ;ÿ;ÿ:ÿ;ÿ7ÿ9ÿ€ÿ.ÿ.ÿÿ-ÿÿ,ÿÿ,ÿÿ,ÿÿ,ÿÿ,ÿÿ-ÿÿ.ÿ/ ÿ3 ÿ3 ÿ6ÿ fþÿ ÿÿþÿ ÿÿÿÿÿþÿÿÿÿþÿÿÿþÿÿþÿÿÿÿÿÿÿÿ ÿÿ ÿÿ ÿ(ÿ)ÿ*ÿ*ÿ+ÿ,ÿ/ÿÿ0ÿÿ0ÿÿ0ÿÿ1ÿÿ1ÿÿ0ÿÿ0ÿÿ0ÿÿ1ÿÿ1ÿÿ1ÿÿ1ÿÿ0ÿÿ1ÿÿ1ÿÿ1ÿÿ1ÿÿ2ÿÿ1ÿÿ1ÿÿ1ÿÿ1ÿÿ2ÿÿ2ÿÿ2ÿÿ1ÿÿ1ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ;ÿ;ÿ9ÿ:ÿ:ÿ:ÿ:ÿ8ÿ8ÿ8ÿ4ÿ-ÿ. ÿ1ÿw@@€€ Backgroundÿ     • ˜€€ °KÛ€€ ÌÏ+Ô;Ø€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×׈€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯@@vigor-0.016.orig/vigor/v2cp0000.xcf0100664000076400007640000013065307103707231015302 0ustar cjw44cjw44gimp xcf file€€BB_€€ Backgroundÿ     €€&±Ÿ€€B- XP…¨€.°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐf™«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏ™3ÐÑ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎfÏÐÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍfÏ3fÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËË3Ì3ÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÀ™f™ÊÊËÌÌÌÏ3Ш©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂ3ÅÅ€‰Ìf3ËÍÎ3§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÃÃÄÌÆÈÌÊ™ÍÌ̧§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿À3ÁÂÃÃÅÅÆ3ÈÈ™Ì3¦§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾ÌÀÁÁÂ3ÄÅÅÆÌÈfÊËf3¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾ÌÀÀ™€¿3ÅÅ33ÈÊËË™¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼3¾™f3™3ÌÅÇÉÊ™¤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼Ì¿ÀÁÁÂÃÙÅ3fÊË̤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»f3f¾¾™fþÃÈ3™f™Ê™£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º3¼½¾fÀþÌýÆÌÊ΢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹»¼¼½3¾Ìú™33ÔÉÌ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹ºÌþÌØÿ3¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··ü»¼fû3Ì Ó ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶·™¹º»»øf3™3 ×¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶·¸¹¹ö¼Ì3™ÌfÍŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´3™··¸¹™¼™™þ3Ÿ Ô¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´¶¶··3™™Ìþ3ÓžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«™¬­­®¯¯°±±²²³µ¶¶™3¹ÚžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²™™´ü·™ ýfÿÏžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²´µ™·Ìfÿþ™ÜœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬3­­®¯¯°±±ý´fþÌÿЛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°²²3fÌ™·™þ™ÿÿ×™››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯±™þ3ùÌ·¹fÿÒš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­™¯f™²3µþ3ÿ×fšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬™3®¯Ì±±ü™´µ ÿÙ™šš››œžžŸ  ¡¢¢££¤¥¥¦§Ì¨¨©ªª«¬­­3¯¯ÌÿÛ˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª™3¬­­™þ²û™f3fÿ˜Û™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª«¬¬3̲þ™ þ™ÿÿØ—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª«™¯þÌ ÿÕ–—˜˜™™š››œžžŸ  ¡Ì¢££¤¥¥¦§§¨¨Ì¬¬­Ìfþ3ÿ–Ù—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨ª«f­­™ûf²fþ™ÿÿÙ•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨3ªª«¬ýf¯þ™ÿÓ”•––—˜˜™™š››œžžŸ  ¡¢¢££¤3¥¦§f¨©ª«­­3¯Ìþfÿ”Þ•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¨f©ú«¬­3® ÿÝ“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥Ì™úª««¬­þÌþ™ÿ“”Ý•––—˜˜™™š››œžžŸ  ¡¢¢££¤Ì3f©ª ýf3ÿÞ’““””•––—˜˜™™š››œžžŸ  ¡¡¢££™¥™÷™ªªÌ3ýÌ3ÿÜf‘’““””•––—˜˜™™š››œžž™  ¡¡¢££¤¥üf¨©þ™‘Û’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥™§¨ùª«3Ìò‘‘’““””•––—˜™™îš››œœžžŸ  ¡¡¢Ì¤ôf¨©ª«ÌÑ‘‘’““””•––—3˜™™š››œœžžŸ  ¡¡f™£™f§¨¨©3«þÿÒ‘‘’““””•––—˜˜™™š››œœžŸ  ¡¡¢££Ì̦§¨fª«ÿÑŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¢££f¦¦§©ªÿþÌŽÛ‘‘’““””•––——˜™™š››œœžžŸ ¡¢Ì¦þ3ÿþÌÙŽŽ‘‘’““””•––——˜™™š››œœžÌ  ¡¡££¤û33ÿ׌ŽŽ‘‘’““””•––——˜™™š››œœžŸ  3¢£Ìþ©ÿÒ3ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ ¡¡3£f™þfþªÿÌ‹ŒŒŽŽ‘‘’’“””•––——˜™™š››Ì3žžÌ f¢£ÌÌ™¨3™þfÿÿÔŠ‹ŒŒŽŽ‘‘’’“””•––——˜™™š›fœž™ ¡¡3£™ý§ÌÿŠÐ‹ŒŒŽ‘‘’’“””•––——˜™™š™fœœž3 ¢£¤¦¨ÿþÿÿ扊Š‹ŒŒŽ‘‘’’“””•––——˜™™ð3›œœžÌ¡¡¢ff ü™f3ÿÿ‰ŠÚ‹ŒŒŽ‘‘’’“””•––——˜™™››œ3ŸÌfÌû¤3f¦þ3ÿÌ€.°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐf™«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏ™3ÐÑ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎfÏÐÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍfÏ3fÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËË3Ì3ÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÀ™f™ÊÊËÌÌÌÏ3Ш©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂ3ÅÅ€‰Ìf3ËÍÎ3§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÃÃÄÌÆÈÌÊ™ÍÌ̧§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿À3ÁÂÃÃÅÅÆ3ÈÈ™Ì3¦§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾ÌÀÁÁÂ3ÄÅÅÆÌÈfÊËf3¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾ÌÀÀ™€¿3ÅÅ33ÈÊËË™¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼3¾™f3™3ÌÅÇÉÊ™¤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼Ì¿ÀÁÁÂÃÙÅ3fÊË̤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»f3f¾¾™fþÃÈ3™f™Ê™£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º3¼½¾fÀþÌýÆÌÊ΢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹»¼¼½3¾Ìú™33ÔÉÌ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹ºÌþÌØÿ3¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··ü»¼fû3Ì Ó ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶·™¹º»»øf3™3 ×¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶·¸¹¹ö¼Ì3™ÌfÍŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´3™··¸¹™¼™™þ3Ÿ Ô¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´¶¶··3™™Ìþ3ÓžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«™¬­­®¯¯°±±²²³µ¶¶™3¹ÚžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²™™´ü·™ ýfÿÏžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²´µ™·Ìfÿþ™ÜœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬3­­®¯¯°±±ý´fþÌÿЛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°²²3fÌ™·™þ™ÿÿ×™››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯±™þ3ùÌ·¹fÿÒš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­™¯f™²3µþ3ÿ×fšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬™3®¯Ì±±ü™´µ ÿÙ™šš››œžžŸ  ¡¢¢££¤¥¥¦§Ì¨¨©ªª«¬­­3¯¯ÌÿÛ˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª™3¬­­™þ²û™f3fÿ˜Û™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª«¬¬3̲þ™ þ™ÿÿØ—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª«™¯þÌ ÿÕ–—˜˜™™š››œžžŸ  ¡Ì¢££¤¥¥¦§§¨¨Ì¬¬­Ìfþ3ÿ–Ù—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨ª«f­­™ûf²fþ™ÿÿÙ•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨3ªª«¬ýf¯þ™ÿÓ”•––—˜˜™™š››œžžŸ  ¡¢¢££¤3¥¦§f¨©ª«­­3¯Ìþfÿ”Þ•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¨f©ú«¬­3® ÿÝ“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥Ì™úª««¬­þÌþ™ÿ“”Ý•––—˜˜™™š››œžžŸ  ¡¢¢££¤Ì3f©ª ýf3ÿÞ’““””•––—˜˜™™š››œžžŸ  ¡¡¢££™¥™÷™ªªÌ3ýÌ3ÿÜf‘’““””•––—˜˜™™š››œžž™  ¡¡¢££¤¥üf¨©þ™‘Û’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥™§¨ùª«3Ìò‘‘’““””•––—˜™™îš››œœžžŸ  ¡¡¢Ì¤ôf¨©ª«ÌÑ‘‘’““””•––—3˜™™š››œœžžŸ  ¡¡f™£™f§¨¨©3«þÿÒ‘‘’““””•––—˜˜™™š››œœžŸ  ¡¡¢££Ì̦§¨fª«ÿÑŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¢££f¦¦§©ªÿþÌŽÛ‘‘’““””•––——˜™™š››œœžžŸ ¡¢Ì¦þ3ÿþÌÙŽŽ‘‘’““””•––——˜™™š››œœžÌ  ¡¡££¤û33ÿ׌ŽŽ‘‘’““””•––——˜™™š››œœžŸ  3¢£Ìþ©ÿÒ3ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ ¡¡3£f™þfþªÿÌ‹ŒŒŽŽ‘‘’’“””•––——˜™™š››Ì3žžÌ f¢£ÌÌ™¨3™þfÿÿÔŠ‹ŒŒŽŽ‘‘’’“””•––——˜™™š›fœž™ ¡¡3£™ý§ÌÿŠÐ‹ŒŒŽ‘‘’’“””•––——˜™™š™fœœž3 ¢£¤¦¨ÿþÿÿ扊Š‹ŒŒŽ‘‘’’“””•––——˜™™ð3›œœžÌ¡¡¢ff ü™f3ÿÿ‰ŠÚ‹ŒŒŽ‘‘’’“””•––——˜™™››œ3ŸÌfÌû¤3f¦þ3ÿÌ€.°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐf™«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏ™3ÐÑ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎfÏÐÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍfÏ3fÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËË3Ì3ÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÀ™f™ÊÊËÌÌÌÏ3Ш©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂ3ÅÅ€‰Ìf3ËÍÎ3§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÃÃÄÌÆÈÌÊ™ÍÌ̧§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿À3ÁÂÃÃÅÅÆ3ÈÈ™Ì3¦§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾ÌÀÁÁÂ3ÄÅÅÆÌÈfÊËf3¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾ÌÀÀ™€¿3ÅÅ33ÈÊËË™¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼3¾™f3™3ÌÅÇÉÊ™¤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼Ì¿ÀÁÁÂÃÙÅ3fÊË̤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»f3f¾¾™fþÃÈ3™f™Ê™£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º3¼½¾fÀþÌýÆÌÊ΢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹»¼¼½3¾Ìú™33ÔÉÌ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹ºÌþÌØÿ3¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··ü»¼fû3Ì Ó ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶·™¹º»»øf3™3 ×¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶·¸¹¹ö¼Ì3™ÌfÍŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´3™··¸¹™¼™™þ3Ÿ Ô¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´¶¶··3™™Ìþ3ÓžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«™¬­­®¯¯°±±²²³µ¶¶™3¹ÚžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²™™´ü·™ ýfÿÏžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²´µ™·Ìfÿþ™ÜœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬3­­®¯¯°±±ý´fþÌÿЛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°²²3fÌ™·™þ™ÿÿ×™››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯±™þ3ùÌ·¹fÿÒš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­™¯f™²3µþ3ÿ×fšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬™3®¯Ì±±ü™´µ ÿÙ™šš››œžžŸ  ¡¢¢££¤¥¥¦§Ì¨¨©ªª«¬­­3¯¯ÌÿÛ˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª™3¬­­™þ²û™f3fÿ˜Û™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª«¬¬3̲þ™ þ™ÿÿØ—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ª«™¯þÌ ÿÕ–—˜˜™™š››œžžŸ  ¡Ì¢££¤¥¥¦§§¨¨Ì¬¬­Ìfþ3ÿ–Ù—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨ª«f­­™ûf²fþ™ÿÿÙ•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨3ªª«¬ýf¯þ™ÿÓ”•––—˜˜™™š››œžžŸ  ¡¢¢££¤3¥¦§f¨©ª«­­3¯Ìþfÿ”Þ•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¨f©ú«¬­3® ÿÝ“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥Ì™úª««¬­þÌþ™ÿ“”Ý•––—˜˜™™š››œžžŸ  ¡¢¢££¤Ì3f©ª ýf3ÿÞ’““””•––—˜˜™™š››œžžŸ  ¡¡¢££™¥™÷™ªªÌ3ýÌ3ÿÜf‘’““””•––—˜˜™™š››œžž™  ¡¡¢££¤¥üf¨©þ™‘Û’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥™§¨ùª«3Ìò‘‘’““””•––—˜™™îš››œœžžŸ  ¡¡¢Ì¤ôf¨©ª«ÌÑ‘‘’““””•––—3˜™™š››œœžžŸ  ¡¡f™£™f§¨¨©3«þÿÒ‘‘’““””•––—˜˜™™š››œœžŸ  ¡¡¢££Ì̦§¨fª«ÿÑŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¢££f¦¦§©ªÿþÌŽÛ‘‘’““””•––——˜™™š››œœžžŸ ¡¢Ì¦þ3ÿþÌÙŽŽ‘‘’““””•––——˜™™š››œœžÌ  ¡¡££¤û33ÿ׌ŽŽ‘‘’““””•––——˜™™š››œœžŸ  3¢£Ìþ©ÿÒ3ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ ¡¡3£f™þfþªÿÌ‹ŒŒŽŽ‘‘’’“””•––——˜™™š››Ì3žžÌ f¢£ÌÌ™¨3™þfÿÿÔŠ‹ŒŒŽŽ‘‘’’“””•––——˜™™š›fœž™ ¡¡3£™ý§ÌÿŠÐ‹ŒŒŽ‘‘’’“””•––——˜™™š™fœœž3 ¢£¤¦¨ÿþÿÿ扊Š‹ŒŒŽ‘‘’’“””•––——˜™™ð3›œœžÌ¡¡¢ff ü™f3ÿÿ‰ŠÚ‹ŒŒŽ‘‘’’“””•––——˜™™››œ3ŸÌfÌû¤3f¦þ3ÿÌÿ€QØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþû×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþû××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýûÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýûÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàáÌÌ™Ìääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüûÕÌf™ÙÙÚÚÛÜÜÝÞfÕ3™f3fåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûû»3ÖÌÙÙÚÚÛÜÜÌßßàááââã™åææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûû™™ÕÖ׿ÚÛÝÞÞßßàááââ™äåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúû3Ô3™×ØÙÙÜÅÝÞÞß™3Ìââääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùûÒÓ3™fÖ××™Ýßàááâãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùûÒ™ÌÔÔÕÖ™ÌÚÚÛfÞßßàÌáâãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøûÑ3ÒÓÔþ3ÙÚÅÛÝÝÞßßàÌââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øûÑÒ™ÌÕ™½ØÙÚÚÛÜÝÝÞßßfáââãääåææççèééêëëììíîîïïðññòóóôôõöö÷ûÐÐÒÔÕÖ×3Ìþ3Ï3àááââãääåææççèééêêëììíîîïïðññòóóôôõööûÏ3Ñ™Ôø™×ÌÙÚþ3ÖfàááââãääåææççèééêêëììíîîïïðññòóóôôõöûfÐóÓ™3Ì×ØØÙÚþ™Øàááââãääåææççèééêêëììíîîïïðññòóóôôõû™þ™þ3þ3ûÚÜÜÛàááââãääåææççèééêêëììíîîïïðññòóóôôûÍø™Ìff ûÜÝÞáâáãääååæççèééêêëììíîîïïðññòóóôûÍúÐÑ3Ì™™ØØ333ÝÝÞ3ááââãääååæççèééêêëììíîîïïðññòóóûføÌff3úÌÖ×™ØÖÚÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóûþÌø33™ÜÝÕÞfÌààáââãääååæççèééêêëììíîîïïðññòû3Ìf3þ3üÌØüfÜÜÛßààáââãääååæççèééêêëììíîîïïðññû3fÌ3ú33fÑ™™Û3ÝÝfßààáââãääååæççèééêêëììíîîïïðñû33þ3ÜÌÜÝ™ßßààáââãääååæççèééêêëììíîîïïðûþfØþÛãßààáââãääååæççèééêêëììííîïïûø3ÕÖÌØ3ÝÌÛfÝßààáââãääååæççèééêêëììííîïû þfÓf™×™ÙÚÛ™ÝÝßßààáââãääååæççèééêêëììííîûø3ÒffÞÚÛÜÝÞßßààáââãääååæççèèéêêëììííû 3þ™û™ÖØÛâÜÝÞßßààáââãääååæççèèéêêëììíûþÿ þfúÖ™3áÛ3ÝÝ™Ìßààáââãääååæççèèéêêëììûüfÿ™ÐûÑ33ùf3ÙãÌÜÝÞßßààáââãääååæççèèéêêëìûÿþ™ßØÙÛÛÜÝÝÞßßààáââããäååæççèèéêêë¯ÿþ3ó3fÔÕÕ™ØãfÛÛÜÝÝÞßààáââããäååæççèèéêêûþÌÿÿЙ™ÐÑÒÓÔÕÌØfÚÛÛÜÝÝÞßßààáââããäååæççèèéêûþ™ÿÿþÍÌùÑf3à×ØØfÚÛÛÜÝÝÞÞßààáââããäååæççèèéûþ™ÿÿ™üfÑÒßÖ×Ø™ÚÚÛÛÜÝÝÞÞßààáââããäååæççèèûÌþ3ÿÿþ3ÕÑÒÓfÔ™Ö×ØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèûÿÿ3ÿÿþ™ñ3ÍΙ3ÌÑÒÓÓÖã×ØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççûÿ ÿþÌþÌÖ3fÑÑÒÓ™ÕÖÖØØÙÙÚ™ÜÝÝÞÞßààáââããäååæçûÿ ÿÌÛ3ÑÒfÕÕÖ×ØØÙÙÚ3ÛÜÝÝÞÞßààáââããäååæûÿ ÿþÌ÷3™™™fßÕÖ×ØØÙÙÚÛ3ÜÝÝÞÞßààáââããäååû™ÿÿÿÏÌË™3ÏÐ3ÑÌÓÔÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåûfÿÿþfÖΙ™ÑÑÓ3ÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäû™ÿÿ þÎÝÐÑÒ™ÔÕÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããû3ÿþÌü3ÿÛfÏÐÑÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãûÿÿüÿÌþ3ÏãfÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâûþ3ÿÿ þÌ™âfÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááûþÌÿÿüfÌüËfáÏÐÑÑÒÓÓÔÔ™ÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáûÿþÌ Ù™Êf3ÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààûþfþÿþÌÚfÊ™™ÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàû þÿ Û3fËÍÎÎÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßû ÿõ3ÆÌ3ÊËåÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞû ü3ÿÿÕ3Å33fÊËf3fÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞû ÿþ3ÜÌ3ÊËÌÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝû ÿö3ÄřǙÉÏéÐÑÑÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜû þfÿÿÙ™ÆfÉÉÊÌËÌÌÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜû ÿþ3™Þ™ÉÉÌÊËÌÌÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛûÿßÈÉÉÊÊËÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛûþ™ÿÿýf3ÖfÄÅ™3fÉÉfÌÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚûÿÿþ™ÿÿýfúÄ3ÆÌåÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙûÿ ÿýÿfÄüÅfäÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙûÿ ÿûfÿÌÿØÌÂfÅÅÆ3ÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Øûÿÿfúÿÿ3ÿÿþ3ÚÄÅÅfÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××û™3ÿfÿÿúÿfÌÿÿûfÌß3ÄÅ™ÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×®€QØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþû×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþû××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýûÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýûÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàáÌÌ™Ìääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüûÕÌf™ÙÙÚÚÛÜÜÝÞfÕ3™f3fåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûû»3ÖÌÙÙÚÚÛÜÜÌßßàááââã™åææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûû™™ÕÖ׿ÚÛÝÞÞßßàááââ™äåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúû3Ô3™×ØÙÙÜÅÝÞÞß™3Ìââääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùûÒÓ3™fÖ××™Ýßàááâãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùûÒ™ÌÔÔÕÖ™ÌÚÚÛfÞßßàÌáâãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøûÑ3ÒÓÔþ3ÙÚÅÛÝÝÞßßàÌââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øûÑÒ™ÌÕ™½ØÙÚÚÛÜÝÝÞßßfáââãääåææççèééêëëììíîîïïðññòóóôôõöö÷ûÐÐÒÔÕÖ×3Ìþ3Ï3àááââãääåææççèééêêëììíîîïïðññòóóôôõööûÏ3Ñ™Ôø™×ÌÙÚþ3ÖfàááââãääåææççèééêêëììíîîïïðññòóóôôõöûfÐóÓ™3Ì×ØØÙÚþ™Øàááââãääåææççèééêêëììíîîïïðññòóóôôõû™þ™þ3þ3ûÚÜÜÛàááââãääåææççèééêêëììíîîïïðññòóóôôûÍø™Ìff ûÜÝÞáâáãääååæççèééêêëììíîîïïðññòóóôûÍúÐÑ3Ì™™ØØ333ÝÝÞ3ááââãääååæççèééêêëììíîîïïðññòóóûføÌff3úÌÖ×™ØÖÚÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóûþÌø33™ÜÝÕÞfÌààáââãääååæççèééêêëììíîîïïðññòû3Ìf3þ3üÌØüfÜÜÛßààáââãääååæççèééêêëììíîîïïðññû3fÌ3ú33fÑ™™Û3ÝÝfßààáââãääååæççèééêêëììíîîïïðñû33þ3ÜÌÜÝ™ßßààáââãääååæççèééêêëììíîîïïðûþfØþÛãßààáââãääååæççèééêêëììííîïïûø3ÕÖÌØ3ÝÌÛfÝßààáââãääååæççèééêêëììííîïû þfÓf™×™ÙÚÛ™ÝÝßßààáââãääååæççèééêêëììííîûø3ÒffÞÚÛÜÝÞßßààáââãääååæççèèéêêëììííû 3þ™û™ÖØÛâÜÝÞßßààáââãääååæççèèéêêëììíûþÿ þfúÖ™3áÛ3ÝÝ™Ìßààáââãääååæççèèéêêëììûüfÿ™ÐûÑ33ùf3ÙãÌÜÝÞßßààáââãääååæççèèéêêëìûÿþ™ßØÙÛÛÜÝÝÞßßààáââããäååæççèèéêêë¯ÿþ3ó3fÔÕÕ™ØãfÛÛÜÝÝÞßààáââããäååæççèèéêêûþÌÿÿЙ™ÐÑÒÓÔÕÌØfÚÛÛÜÝÝÞßßààáââããäååæççèèéêûþ™ÿÿþÍÌùÑf3à×ØØfÚÛÛÜÝÝÞÞßààáââããäååæççèèéûþ™ÿÿ™üfÑÒßÖ×Ø™ÚÚÛÛÜÝÝÞÞßààáââããäååæççèèûÌþ3ÿÿþ3ÕÑÒÓfÔ™Ö×ØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèûÿÿ3ÿÿþ™ñ3ÍΙ3ÌÑÒÓÓÖã×ØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççûÿ ÿþÌþÌÖ3fÑÑÒÓ™ÕÖÖØØÙÙÚ™ÜÝÝÞÞßààáââããäååæçûÿ ÿÌÛ3ÑÒfÕÕÖ×ØØÙÙÚ3ÛÜÝÝÞÞßààáââããäååæûÿ ÿþÌ÷3™™™fßÕÖ×ØØÙÙÚÛ3ÜÝÝÞÞßààáââããäååû™ÿÿÿÏÌË™3ÏÐ3ÑÌÓÔÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåûfÿÿþfÖΙ™ÑÑÓ3ÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäû™ÿÿ þÎÝÐÑÒ™ÔÕÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããû3ÿþÌü3ÿÛfÏÐÑÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãûÿÿüÿÌþ3ÏãfÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâûþ3ÿÿ þÌ™âfÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááûþÌÿÿüfÌüËfáÏÐÑÑÒÓÓÔÔ™ÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáûÿþÌ Ù™Êf3ÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààûþfþÿþÌÚfÊ™™ÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàû þÿ Û3fËÍÎÎÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßû ÿõ3ÆÌ3ÊËåÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞû ü3ÿÿÕ3Å33fÊËf3fÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞû ÿþ3ÜÌ3ÊËÌÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝû ÿö3ÄřǙÉÏéÐÑÑÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜû þfÿÿÙ™ÆfÉÉÊÌËÌÌÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜû ÿþ3™Þ™ÉÉÌÊËÌÌÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛûÿßÈÉÉÊÊËÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛûþ™ÿÿýf3ÖfÄÅ™3fÉÉfÌÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚûÿÿþ™ÿÿýfúÄ3ÆÌåÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙûÿ ÿýÿfÄüÅfäÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙûÿ ÿûfÿÌÿØÌÂfÅÅÆ3ÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Øûÿÿfúÿÿ3ÿÿþ3ÚÄÅÅfÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××û™3ÿfÿÿúÿfÌÿÿûfÌß3ÄÅ™ÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×®€QØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþû×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþû××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýûÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýûÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàáÌÌ™Ìääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüûÕÌf™ÙÙÚÚÛÜÜÝÞfÕ3™f3fåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûû»3ÖÌÙÙÚÚÛÜÜÌßßàááââã™åææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûû™™ÕÖ׿ÚÛÝÞÞßßàááââ™äåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúû3Ô3™×ØÙÙÜÅÝÞÞß™3Ìââääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùûÒÓ3™fÖ××™Ýßàááâãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùûÒ™ÌÔÔÕÖ™ÌÚÚÛfÞßßàÌáâãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøûÑ3ÒÓÔþ3ÙÚÅÛÝÝÞßßàÌââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øûÑÒ™ÌÕ™½ØÙÚÚÛÜÝÝÞßßfáââãääåææççèééêëëììíîîïïðññòóóôôõöö÷ûÐÐÒÔÕÖ×3Ìþ3Ï3àááââãääåææççèééêêëììíîîïïðññòóóôôõööûÏ3Ñ™Ôø™×ÌÙÚþ3ÖfàááââãääåææççèééêêëììíîîïïðññòóóôôõöûfÐóÓ™3Ì×ØØÙÚþ™Øàááââãääåææççèééêêëììíîîïïðññòóóôôõû™þ™þ3þ3ûÚÜÜÛàááââãääåææççèééêêëììíîîïïðññòóóôôûÍø™Ìff ûÜÝÞáâáãääååæççèééêêëììíîîïïðññòóóôûÍúÐÑ3Ì™™ØØ333ÝÝÞ3ááââãääååæççèééêêëììíîîïïðññòóóûføÌff3úÌÖ×™ØÖÚÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóûþÌø33™ÜÝÕÞfÌààáââãääååæççèééêêëììíîîïïðññòû3Ìf3þ3üÌØüfÜÜÛßààáââãääååæççèééêêëììíîîïïðññû3fÌ3ú33fÑ™™Û3ÝÝfßààáââãääååæççèééêêëììíîîïïðñû33þ3ÜÌÜÝ™ßßààáââãääååæççèééêêëììíîîïïðûþfØþÛãßààáââãääååæççèééêêëììííîïïûø3ÕÖÌØ3ÝÌÛfÝßààáââãääååæççèééêêëììííîïû þfÓf™×™ÙÚÛ™ÝÝßßààáââãääååæççèééêêëììííîûø3ÒffÞÚÛÜÝÞßßààáââãääååæççèèéêêëììííû 3þ™û™ÖØÛâÜÝÞßßààáââãääååæççèèéêêëììíûþÿ þfúÖ™3áÛ3ÝÝ™Ìßààáââãääååæççèèéêêëììûüfÿ™ÐûÑ33ùf3ÙãÌÜÝÞßßààáââãääååæççèèéêêëìûÿþ™ßØÙÛÛÜÝÝÞßßààáââããäååæççèèéêêë¯ÿþ3ó3fÔÕÕ™ØãfÛÛÜÝÝÞßààáââããäååæççèèéêêûþÌÿÿЙ™ÐÑÒÓÔÕÌØfÚÛÛÜÝÝÞßßààáââããäååæççèèéêûþ™ÿÿþÍÌùÑf3à×ØØfÚÛÛÜÝÝÞÞßààáââããäååæççèèéûþ™ÿÿ™üfÑÒßÖ×Ø™ÚÚÛÛÜÝÝÞÞßààáââããäååæççèèûÌþ3ÿÿþ3ÕÑÒÓfÔ™Ö×ØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèûÿÿ3ÿÿþ™ñ3ÍΙ3ÌÑÒÓÓÖã×ØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççûÿ ÿþÌþÌÖ3fÑÑÒÓ™ÕÖÖØØÙÙÚ™ÜÝÝÞÞßààáââããäååæçûÿ ÿÌÛ3ÑÒfÕÕÖ×ØØÙÙÚ3ÛÜÝÝÞÞßààáââããäååæûÿ ÿþÌ÷3™™™fßÕÖ×ØØÙÙÚÛ3ÜÝÝÞÞßààáââããäååû™ÿÿÿÏÌË™3ÏÐ3ÑÌÓÔÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåûfÿÿþfÖΙ™ÑÑÓ3ÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäû™ÿÿ þÎÝÐÑÒ™ÔÕÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããû3ÿþÌü3ÿÛfÏÐÑÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãûÿÿüÿÌþ3ÏãfÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâûþ3ÿÿ þÌ™âfÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááûþÌÿÿüfÌüËfáÏÐÑÑÒÓÓÔÔ™ÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáûÿþÌ Ù™Êf3ÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààûþfþÿþÌÚfÊ™™ÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàû þÿ Û3fËÍÎÎÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßû ÿõ3ÆÌ3ÊËåÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞû ü3ÿÿÕ3Å33fÊËf3fÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞû ÿþ3ÜÌ3ÊËÌÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝû ÿö3ÄřǙÉÏéÐÑÑÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜû þfÿÿÙ™ÆfÉÉÊÌËÌÌÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜû ÿþ3™Þ™ÉÉÌÊËÌÌÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛûÿßÈÉÉÊÊËÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛûþ™ÿÿýf3ÖfÄÅ™3fÉÉfÌÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚûÿÿþ™ÿÿýfúÄ3ÆÌåÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙûÿ ÿýÿfÄüÅfäÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙûÿ ÿûfÿÌÿØÌÂfÅÅÆ3ÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Øûÿÿfúÿÿ3ÿÿþ3ÚÄÅÅfÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××û™3ÿfÿÿúÿfÌÿÿûfÌß3ÄÅ™ÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×®>ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþ¯ÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿ®ˆá‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™››ý™žú£¤¥Ìÿᇈˆ‰ŠŠ‹ŒŒŽ™‘‘’’“””•––——˜™÷œ3ŸŸ 3ýf™þÌÿÿÈ3ÿ‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘f’“””•––——˜™™šš33žžŸŸ 3™™¤3fÿÑÌÿ†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šÌ3žžŸŸf£ü3™Ðÿÿÿ…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šœœžžŸfû3™þ™ÿÿ…؆‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——Ì™™šœœÌþ¡þ™ÿÜ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–—fÌ™™™õ3™3¤fÿÕƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–̘™™šfÌ3õŸ™33fÓ™ÿƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–—˜™™šœœùŸ 3¢ Ö‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••—˜™™š›õžŸÌ¡33‚ƒÝ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••f˜™÷œff3üÌ3¤Ü‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŽ‘’’“””••3ù3šš›3þfþfÇ€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——™™ššÌ3ž ¡ff€Ë‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–—˜™™šffŸ ¡Ô€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–3˜™™ùœŸŸþ3Ó~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–̘˜3œþfÒ™~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••3f3 þ Ò}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘ff“””••™f˜ùfŸŸ}~Ñ€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–˜š3ýžþ-Õ|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“Ì”••þ™úœfÔ{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“”•• À™3f3{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ’™“”•33™™3œœý3ÕÔz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’Ì”—ù˜Ì3›ýB¢Öyz{{||}~~€€‚ƒƒ„……††‡ˆf™ŠŠ‹‹ŒŽŽ‘Ì3—yÓz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽf’’““”fþ™ÈÕÕÕxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ3’““”•ÌfþÌÕÑÕÕ™wxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽÌ€•f—˜™™Õ¢ÕÕ„wwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’™f“™™—˜™`Õu-Õ3™vwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““½3—˜ÕÕu-Õ33vvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““Ì3•–fÕÇ-BÕ¢uvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰‹‹ŒŽŽ‘’’““fý™BÕÕÂÕÕtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–uÕÕþutÊuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”•ÕÕǨBsttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““3ÕÕÅuÕÕ3rsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’“`ÕÕÉBrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘ÕÕÉ`qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ3ÆÕÕÊ¢qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ™¨Õ ÕÌpqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽ¢Õ ÕÎopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒÕ ÕoÑpqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ÕÕÐnooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Ì3ÕÕÒmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ3ÕÕmÔnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡f·ÕÕ¢ÕþÕÕÓlmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††ÕÕþÕÕü`™BÕÕÓklmmnooppqrrsttuuvwwxyyzz{||}}~€Ì‚‚Ìf†¢ÕÕþÕÕþÕÕÖ3‘fÕÕkklmmnooppqrrsttuuvwwxyyzz{||}}~fþùÕÕþ¢ÕÕþfÕÕØBêÕÕjkklmmnooppqrrsttuuvwwxyyzz{||}™ø#„ÕÕþÕÕý3ÕÕüŽÕÕjkâlmmnooppqrrsttuuvwwxxyzz{||™™þ„ÕÕþÕÕÕý¨™ÕÐijjkklmmnooppqrrsttuuvwwxxyzz{||ff3™ÕÕÕÕü¢ÕÕÔBÕ“ÿ™ó3hijjkklmmnooppqrrsttuuvwwxxyzz{|Ì#ö#--™3ÕÕþ“ÕÕÚhhijjkklmmnooppqrrsttuuvwwxxyzz{f}}þý„Õ ÕÑ`ŒŽÌghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~ü™ƒ„ýÕÆÕÕÎ`Œ3fghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~ø#„„……†ÕÕ‹Ì#ffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~B#3f3¼à“ÕÕ`‰Š#33effghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~3€ó3…†V3ˆ‰‰Šf33ef€ûghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚f„……†‡‡ˆ‰‰ŠŠ‹deeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆá‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™››ý™žú£¤¥Ìÿᇈˆ‰ŠŠ‹ŒŒŽ™‘‘’’“””•––——˜™÷œ3ŸŸ 3ýf™þÌÿÿÈ3ÿ‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘f’“””•––——˜™™šš33žžŸŸ 3™™¤3fÿÑÌÿ†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šÌ3žžŸŸf£ü3™Ðÿÿÿ…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šœœžžŸfû3™þ™ÿÿ…؆‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——Ì™™šœœÌþ¡þ™ÿÜ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–—fÌ™™™õ3™3¤fÿÕƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–̘™™šfÌ3õŸ™33fÓ™ÿƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–—˜™™šœœùŸ 3¢ Ö‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••—˜™™š›õžŸÌ¡33‚ƒÝ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••f˜™÷œff3üÌ3¤Ü‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŽ‘’’“””••3ù3šš›3þfþfÇ€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——™™ššÌ3ž ¡ff€Ë‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–—˜™™šffŸ ¡Ô€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–3˜™™ùœŸŸþ3Ó~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–̘˜3œþfÒ™~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••3f3 þ Ò}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘ff“””••™f˜ùfŸŸ}~Ñ€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–˜š3ýžþ-Õ|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“Ì”••þ™úœfÔ{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“”•• À™3f3{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ’™“”•33™™3œœý3ÕÔz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’Ì”—ù˜Ì3›ýB¢Öyz{{||}~~€€‚ƒƒ„……††‡ˆf™ŠŠ‹‹ŒŽŽ‘Ì3—yÓz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽf’’““”fþ™ÈÕÕÕxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ3’““”•ÌfþÌÕÑÕÕ™wxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽÌ€•f—˜™™Õ¢ÕÕ„wwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’™f“™™—˜™`Õu-Õ3™vwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““½3—˜ÕÕu-Õ33vvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““Ì3•–fÕÇ-BÕ¢uvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰‹‹ŒŽŽ‘’’““fý™BÕÕÂÕÕtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–uÕÕþutÊuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”•ÕÕǨBsttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““3ÕÕÅuÕÕ3rsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’“`ÕÕÉBrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘ÕÕÉ`qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ3ÆÕÕÊ¢qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ™¨Õ ÕÌpqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽ¢Õ ÕÎopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒÕ ÕoÑpqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ÕÕÐnooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Ì3ÕÕÒmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ3ÕÕmÔnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡f·ÕÕ¢ÕþÕÕÓlmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††ÕÕþÕÕü`™BÕÕÓklmmnooppqrrsttuuvwwxyyzz{||}}~€Ì‚‚Ìf†¢ÕÕþÕÕþÕÕÖ3‘fÕÕkklmmnooppqrrsttuuvwwxyyzz{||}}~fþùÕÕþ¢ÕÕþfÕÕØBêÕÕjkklmmnooppqrrsttuuvwwxyyzz{||}™ø#„ÕÕþÕÕý3ÕÕüŽÕÕjkâlmmnooppqrrsttuuvwwxxyzz{||™™þ„ÕÕþÕÕÕý¨™ÕÐijjkklmmnooppqrrsttuuvwwxxyzz{||ff3™ÕÕÕÕü¢ÕÕÔBÕ“ÿ™ó3hijjkklmmnooppqrrsttuuvwwxxyzz{|Ì#ö#--™3ÕÕþ“ÕÕÚhhijjkklmmnooppqrrsttuuvwwxxyzz{f}}þý„Õ ÕÑ`ŒŽÌghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~ü™ƒ„ýÕÆÕÕÎ`Œ3fghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~ø#„„……†ÕÕ‹Ì#ffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~B#3f3¼à“ÕÕ`‰Š#33effghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~3€ó3…†V3ˆ‰‰Šf33ef€ûghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚f„……†‡‡ˆ‰‰ŠŠ‹deeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆá‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™››ý™žú£¤¥Ìÿᇈˆ‰ŠŠ‹ŒŒŽ™‘‘’’“””•––——˜™÷œ3ŸŸ 3ýf™þÌÿÿÈ3ÿ‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘f’“””•––——˜™™šš33žžŸŸ 3™™¤3fÿÑÌÿ†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šÌ3žžŸŸf£ü3™Ðÿÿÿ…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šœœžžŸfû3™þ™ÿÿ…؆‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——Ì™™šœœÌþ¡þ™ÿÜ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–—fÌ™™™õ3™3¤fÿÕƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–̘™™šfÌ3õŸ™33fÓ™ÿƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–—˜™™šœœùŸ 3¢ Ö‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••—˜™™š›õžŸÌ¡33‚ƒÝ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••f˜™÷œff3üÌ3¤Ü‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŽ‘’’“””••3ù3šš›3þfþfÇ€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——™™ššÌ3ž ¡ff€Ë‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–—˜™™šffŸ ¡Ô€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–3˜™™ùœŸŸþ3Ó~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–̘˜3œþfÒ™~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••3f3 þ Ò}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘ff“””••™f˜ùfŸŸ}~Ñ€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–˜š3ýžþ-Õ|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“Ì”••þ™úœfÔ{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“”•• À™3f3{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ’™“”•33™™3œœý3ÕÔz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’Ì”—ù˜Ì3›ýB¢Öyz{{||}~~€€‚ƒƒ„……††‡ˆf™ŠŠ‹‹ŒŽŽ‘Ì3—yÓz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽf’’““”fþ™ÈÕÕÕxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ3’““”•ÌfþÌÕÑÕÕ™wxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽÌ€•f—˜™™Õ¢ÕÕ„wwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’™f“™™—˜™`Õu-Õ3™vwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““½3—˜ÕÕu-Õ33vvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““Ì3•–fÕÇ-BÕ¢uvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰‹‹ŒŽŽ‘’’““fý™BÕÕÂÕÕtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–uÕÕþutÊuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”•ÕÕǨBsttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““3ÕÕÅuÕÕ3rsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’“`ÕÕÉBrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘ÕÕÉ`qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ3ÆÕÕÊ¢qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ™¨Õ ÕÌpqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽ¢Õ ÕÎopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒÕ ÕoÑpqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ÕÕÐnooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Ì3ÕÕÒmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ3ÕÕmÔnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡f·ÕÕ¢ÕþÕÕÓlmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††ÕÕþÕÕü`™BÕÕÓklmmnooppqrrsttuuvwwxyyzz{||}}~€Ì‚‚Ìf†¢ÕÕþÕÕþÕÕÖ3‘fÕÕkklmmnooppqrrsttuuvwwxyyzz{||}}~fþùÕÕþ¢ÕÕþfÕÕØBêÕÕjkklmmnooppqrrsttuuvwwxyyzz{||}™ø#„ÕÕþÕÕý3ÕÕüŽÕÕjkâlmmnooppqrrsttuuvwwxxyzz{||™™þ„ÕÕþÕÕÕý¨™ÕÐijjkklmmnooppqrrsttuuvwwxxyzz{||ff3™ÕÕÕÕü¢ÕÕÔBÕ“ÿ™ó3hijjkklmmnooppqrrsttuuvwwxxyzz{|Ì#ö#--™3ÕÕþ“ÕÕÚhhijjkklmmnooppqrrsttuuvwwxxyzz{f}}þý„Õ ÕÑ`ŒŽÌghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~ü™ƒ„ýÕÆÕÕÎ`Œ3fghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~ø#„„……†ÕÕ‹Ì#ffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~B#3f3¼à“ÕÕ`‰Š#33effghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~3€ó3…†V3ˆ‰‰Šf33ef€ûghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚f„……†‡‡ˆ‰‰ŠŠ‹deeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ÿþÿÿü™ÿÿÿûÌÿÿ™ú3™ÂÛfÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖûÿÌfÿÌÿÿþÌÜÁÂ3™ÄÅÅÆÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕûÿÿüÿÿÿ ÝÁ™ÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕûÿÿüÌ3™ÿÿþfþ»ÝÀÁÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔûÿÿþÿÿþ™ ÛÌÌÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔûÿ ÿ þÌþ3ß3ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓûÿ ÿ þfÛÌ3ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒûÿÿ™ÿ ×3»fÌ¿3ÁÂÂÃÃÄÅÅÆÇÇÈÈfÊÊËËÌÍÍÎÏÏÐÐÑÒûü3»»ß¾¿ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑûþfü3»»྿ÀÀfÂÂÃÃÌÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐûø™3»™3åÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐûþfý™f½¾ã¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏûû™3ý̹½¾ä¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏûþ™ڸ̺f»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎûþfÚ3¸º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍûþfþµÙ¸¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍû3÷©f«™3û´fÞ™¹º»»™½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌûýf3þÌ Ø™™¶3¹º»3¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËûþfü™B Û3¶¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËûø™ª3Õ³¸¹ßº»»¼¼½¾¾ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊûf¥þ©þ¨Ñ™3³Ì´µ¶·¸¹¹º»»¼¼½¾f¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊû™¤ü§3 øÌ3³´àÌ·¸¹¹º»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉûö¤™™§™ÌúoÕuÓ±f³´µ··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈûf£û¦§¨ú¨ÕÕþ±ܳ´´Ì¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈûþ¢û¥¦§ûuÕÕÕ¯°±™³´´¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇûÌ3£™¥3§3G“ÕÕÕÔ33°±²³fµ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆû3ï3¢£™¥¦§¨u“ÕÕÏf¯°²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆû™¡¢¢¥÷¦§3ÕÕÖ¢™¯°±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅûî™ ¡f™¤¤¥¥§¢ÕÕÕÞ±²²³´´µ¶¶··¸¹¹»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄû쟠33f£¤¤¦êÕfÕB¢ÕÕÇ3­®¯±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄûžŸŸ ™¢™¤3¥¥àóÕÕþuÇÕ­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃû™žŸŸÌ¢f£¤¤¥êÕÕÔ­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂ훜ž÷ ¡¢¢£¤¤¥Õ ÕÊ­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂû››œfŸ  ¡¢££¤Õ ÕË­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁûš››œžŸŸ  ¡¢¢£àÕ ÕÌ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁûšš››œžŸŸ  ¡¢¢êÕ ÕÌÆ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿Àû™šš››œÌžŸ  ¡¢¢Õ Õͨ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿û˜™šš››œžžŸ  ¡3Õ ÕÎÆ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿û˜™šš››œžžŸ  ÕÕ×­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾û˜˜™ššÌ™3ûžŸ ÕÕÛó­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾û—˜˜™þ#žýŸÕ Õþ“ÕÕÛ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½ûÕ—˜˜™3ú™ÌÕ ÕþuÕÕþÕÕÛ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼ûÕ–—˜˜#ýÕ Õý¢ÕÕýóÕÕÖ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼ûÕÕ™–—˜˜™#fœÕ Õý¢ÕÕÓóÕÕ™­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»ûÕÕ™––—˜3ïš›ÕÕý`ÕÕýuBÕÕÕÕÕu­­®¯¯°°±²²³´´µµ¶··¸¹¹ººûÕÕ•––—˜˜™fóÕÕû¼ fÕÕý¨“ÕÕþÕÕÚ¢™­­®¯¯°°±²²³´´µµ¶··¸¸¹ºûÕÕf”•––—fÿÕÕúŸ  ÕÕÕþÕÕ߬­­®¯¯°°±²²³´´µµ¶··¸¸¹ûÕ`“”Ì™–ÿÿþÕÕžûŸ  ÕÕúBÕÕÕÕà3¬­­®¯¯°°±²²³´´µµ¶··¸¸ûÕ“•ÿÿý™ÕÕ3øžžŸ QuÕÕÖ`BÕÕB¢Õ«¬­­®¯¯°°±²²³³´µµ¶··¸û‘f™3Õ3“ÕÕñ¢Q›œ3Ÿ ™uÕÕþ3ÕÕݨ3«¬­­®¯¯°°±²²³³´µµ¶··û¼#“fÕ3ÕÕ𙚛›3#3Ÿ  ¡™ÕÕþÕի쬭­®¯¯°°±²²³³´µµ¶·ûú™’“Ì¢ÕÕú3˜™f÷ÌžžŸ  ¡ÕÕä-ÕÕ¢™ª««¬­­®®¯°°±²²³³´µµ¶ûå’“Ì3B––—™™šB3ÌžžŸ  ¡ÕÕþÕÕª«î¬­­®®¯°°±²²³³´µµûó’““””•––——˜fù™Ÿ  ¡ÕÕá“¢“Q©ªª««¬­­®®¯°°±²²³³´µûô™“””•––——#ö#žžŸ  ¡3uÕÕÛ¥¨3f¨©©ª««¬­­®®¯°°±²²³³´û####ú•––—3þ#þÞ ¡¡fÆÕfBÕf¨©©ª««¬­­®®¯°°±²²³³ûþ#ô™––3™3™þ3Û¢™Õ¥§¨¨©©ª««¬­­®®¯°°±²²³ûŒŒïŽŽí3™™”•––——˜™™š™fº#¡¢££¤¥¥¦¦§¨¨©©™f«¬­­®®¯°°±²²û‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžÌ## €O««¬­­®®¯°°±²ûŠ‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœÌfŸf¼à™Ì̦¦§¨¨©©ª««¬­­®®¯°°±ûŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°û‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°û‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯ûˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯þÿÿü™ÿÿÿûÌÿÿ™ú3™ÂÛfÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖûÿÌfÿÌÿÿþÌÜÁÂ3™ÄÅÅÆÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕûÿÿüÿÿÿ ÝÁ™ÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕûÿÿüÌ3™ÿÿþfþ»ÝÀÁÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔûÿÿþÿÿþ™ ÛÌÌÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔûÿ ÿ þÌþ3ß3ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓûÿ ÿ þfÛÌ3ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒûÿÿ™ÿ ×3»fÌ¿3ÁÂÂÃÃÄÅÅÆÇÇÈÈfÊÊËËÌÍÍÎÏÏÐÐÑÒûü3»»ß¾¿ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑûþfü3»»྿ÀÀfÂÂÃÃÌÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐûø™3»™3åÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐûþfý™f½¾ã¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏûû™3ý̹½¾ä¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏûþ™ڸ̺f»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎûþfÚ3¸º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍûþfþµÙ¸¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍû3÷©f«™3û´fÞ™¹º»»™½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌûýf3þÌ Ø™™¶3¹º»3¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËûþfü™B Û3¶¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËûø™ª3Õ³¸¹ßº»»¼¼½¾¾ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊûf¥þ©þ¨Ñ™3³Ì´µ¶·¸¹¹º»»¼¼½¾f¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊû™¤ü§3 øÌ3³´àÌ·¸¹¹º»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉûö¤™™§™ÌúoÕuÓ±f³´µ··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈûf£û¦§¨ú¨ÕÕþ±ܳ´´Ì¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈûþ¢û¥¦§ûuÕÕÕ¯°±™³´´¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇûÌ3£™¥3§3G“ÕÕÕÔ33°±²³fµ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆû3ï3¢£™¥¦§¨u“ÕÕÏf¯°²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆû™¡¢¢¥÷¦§3ÕÕÖ¢™¯°±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅûî™ ¡f™¤¤¥¥§¢ÕÕÕÞ±²²³´´µ¶¶··¸¹¹»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄû쟠33f£¤¤¦êÕfÕB¢ÕÕÇ3­®¯±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄûžŸŸ ™¢™¤3¥¥àóÕÕþuÇÕ­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃû™žŸŸÌ¢f£¤¤¥êÕÕÔ­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂ훜ž÷ ¡¢¢£¤¤¥Õ ÕÊ­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂû››œfŸ  ¡¢££¤Õ ÕË­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁûš››œžŸŸ  ¡¢¢£àÕ ÕÌ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁûšš››œžŸŸ  ¡¢¢êÕ ÕÌÆ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿Àû™šš››œÌžŸ  ¡¢¢Õ Õͨ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿û˜™šš››œžžŸ  ¡3Õ ÕÎÆ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿û˜™šš››œžžŸ  ÕÕ×­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾û˜˜™ššÌ™3ûžŸ ÕÕÛó­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾û—˜˜™þ#žýŸÕ Õþ“ÕÕÛ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½ûÕ—˜˜™3ú™ÌÕ ÕþuÕÕþÕÕÛ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼ûÕ–—˜˜#ýÕ Õý¢ÕÕýóÕÕÖ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼ûÕÕ™–—˜˜™#fœÕ Õý¢ÕÕÓóÕÕ™­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»ûÕÕ™––—˜3ïš›ÕÕý`ÕÕýuBÕÕÕÕÕu­­®¯¯°°±²²³´´µµ¶··¸¹¹ººûÕÕ•––—˜˜™fóÕÕû¼ fÕÕý¨“ÕÕþÕÕÚ¢™­­®¯¯°°±²²³´´µµ¶··¸¸¹ºûÕÕf”•––—fÿÕÕúŸ  ÕÕÕþÕÕ߬­­®¯¯°°±²²³´´µµ¶··¸¸¹ûÕ`“”Ì™–ÿÿþÕÕžûŸ  ÕÕúBÕÕÕÕà3¬­­®¯¯°°±²²³´´µµ¶··¸¸ûÕ“•ÿÿý™ÕÕ3øžžŸ QuÕÕÖ`BÕÕB¢Õ«¬­­®¯¯°°±²²³³´µµ¶··¸û‘f™3Õ3“ÕÕñ¢Q›œ3Ÿ ™uÕÕþ3ÕÕݨ3«¬­­®¯¯°°±²²³³´µµ¶··û¼#“fÕ3ÕÕ𙚛›3#3Ÿ  ¡™ÕÕþÕի쬭­®¯¯°°±²²³³´µµ¶·ûú™’“Ì¢ÕÕú3˜™f÷ÌžžŸ  ¡ÕÕä-ÕÕ¢™ª««¬­­®®¯°°±²²³³´µµ¶ûå’“Ì3B––—™™šB3ÌžžŸ  ¡ÕÕþÕÕª«î¬­­®®¯°°±²²³³´µµûó’““””•––——˜fù™Ÿ  ¡ÕÕá“¢“Q©ªª««¬­­®®¯°°±²²³³´µûô™“””•––——#ö#žžŸ  ¡3uÕÕÛ¥¨3f¨©©ª««¬­­®®¯°°±²²³³´û####ú•––—3þ#þÞ ¡¡fÆÕfBÕf¨©©ª««¬­­®®¯°°±²²³³ûþ#ô™––3™3™þ3Û¢™Õ¥§¨¨©©ª««¬­­®®¯°°±²²³ûŒŒïŽŽí3™™”•––——˜™™š™fº#¡¢££¤¥¥¦¦§¨¨©©™f«¬­­®®¯°°±²²û‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžÌ## €O««¬­­®®¯°°±²ûŠ‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœÌfŸf¼à™Ì̦¦§¨¨©©ª««¬­­®®¯°°±ûŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°û‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°û‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯ûˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯þÿÿü™ÿÿÿûÌÿÿ™ú3™ÂÛfÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖûÿÌfÿÌÿÿþÌÜÁÂ3™ÄÅÅÆÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕûÿÿüÿÿÿ ÝÁ™ÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕûÿÿüÌ3™ÿÿþfþ»ÝÀÁÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔûÿÿþÿÿþ™ ÛÌÌÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔûÿ ÿ þÌþ3ß3ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓûÿ ÿ þfÛÌ3ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒûÿÿ™ÿ ×3»fÌ¿3ÁÂÂÃÃÄÅÅÆÇÇÈÈfÊÊËËÌÍÍÎÏÏÐÐÑÒûü3»»ß¾¿ÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑûþfü3»»྿ÀÀfÂÂÃÃÌÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐûø™3»™3åÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐûþfý™f½¾ã¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏûû™3ý̹½¾ä¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏûþ™ڸ̺f»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎûþfÚ3¸º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍûþfþµÙ¸¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍû3÷©f«™3û´fÞ™¹º»»™½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌûýf3þÌ Ø™™¶3¹º»3¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËûþfü™B Û3¶¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËûø™ª3Õ³¸¹ßº»»¼¼½¾¾ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊûf¥þ©þ¨Ñ™3³Ì´µ¶·¸¹¹º»»¼¼½¾f¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊû™¤ü§3 øÌ3³´àÌ·¸¹¹º»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉûö¤™™§™ÌúoÕuÓ±f³´µ··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈûf£û¦§¨ú¨ÕÕþ±ܳ´´Ì¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈûþ¢û¥¦§ûuÕÕÕ¯°±™³´´¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇûÌ3£™¥3§3G“ÕÕÕÔ33°±²³fµ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆû3ï3¢£™¥¦§¨u“ÕÕÏf¯°²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆû™¡¢¢¥÷¦§3ÕÕÖ¢™¯°±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅûî™ ¡f™¤¤¥¥§¢ÕÕÕÞ±²²³´´µ¶¶··¸¹¹»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄû쟠33f£¤¤¦êÕfÕB¢ÕÕÇ3­®¯±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄûžŸŸ ™¢™¤3¥¥àóÕÕþuÇÕ­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃû™žŸŸÌ¢f£¤¤¥êÕÕÔ­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂ훜ž÷ ¡¢¢£¤¤¥Õ ÕÊ­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂû››œfŸ  ¡¢££¤Õ ÕË­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁûš››œžŸŸ  ¡¢¢£àÕ ÕÌ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁûšš››œžŸŸ  ¡¢¢êÕ ÕÌÆ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿Àû™šš››œÌžŸ  ¡¢¢Õ Õͨ­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿û˜™šš››œžžŸ  ¡3Õ ÕÎÆ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿û˜™šš››œžžŸ  ÕÕ×­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾û˜˜™ššÌ™3ûžŸ ÕÕÛó­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾û—˜˜™þ#žýŸÕ Õþ“ÕÕÛ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½ûÕ—˜˜™3ú™ÌÕ ÕþuÕÕþÕÕÛ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼ûÕ–—˜˜#ýÕ Õý¢ÕÕýóÕÕÖ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼ûÕÕ™–—˜˜™#fœÕ Õý¢ÕÕÓóÕÕ™­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»ûÕÕ™––—˜3ïš›ÕÕý`ÕÕýuBÕÕÕÕÕu­­®¯¯°°±²²³´´µµ¶··¸¹¹ººûÕÕ•––—˜˜™fóÕÕû¼ fÕÕý¨“ÕÕþÕÕÚ¢™­­®¯¯°°±²²³´´µµ¶··¸¸¹ºûÕÕf”•––—fÿÕÕúŸ  ÕÕÕþÕÕ߬­­®¯¯°°±²²³´´µµ¶··¸¸¹ûÕ`“”Ì™–ÿÿþÕÕžûŸ  ÕÕúBÕÕÕÕà3¬­­®¯¯°°±²²³´´µµ¶··¸¸ûÕ“•ÿÿý™ÕÕ3øžžŸ QuÕÕÖ`BÕÕB¢Õ«¬­­®¯¯°°±²²³³´µµ¶··¸û‘f™3Õ3“ÕÕñ¢Q›œ3Ÿ ™uÕÕþ3ÕÕݨ3«¬­­®¯¯°°±²²³³´µµ¶··û¼#“fÕ3ÕÕ𙚛›3#3Ÿ  ¡™ÕÕþÕի쬭­®¯¯°°±²²³³´µµ¶·ûú™’“Ì¢ÕÕú3˜™f÷ÌžžŸ  ¡ÕÕä-ÕÕ¢™ª««¬­­®®¯°°±²²³³´µµ¶ûå’“Ì3B––—™™šB3ÌžžŸ  ¡ÕÕþÕÕª«î¬­­®®¯°°±²²³³´µµûó’““””•––——˜fù™Ÿ  ¡ÕÕá“¢“Q©ªª««¬­­®®¯°°±²²³³´µûô™“””•––——#ö#žžŸ  ¡3uÕÕÛ¥¨3f¨©©ª««¬­­®®¯°°±²²³³´û####ú•––—3þ#þÞ ¡¡fÆÕfBÕf¨©©ª««¬­­®®¯°°±²²³³ûþ#ô™––3™3™þ3Û¢™Õ¥§¨¨©©ª««¬­­®®¯°°±²²³ûŒŒïŽŽí3™™”•––——˜™™š™fº#¡¢££¤¥¥¦¦§¨¨©©™f«¬­­®®¯°°±²²û‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžÌ## €O««¬­­®®¯°°±²ûŠ‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœÌfŸf¼à™Ì̦¦§¨¨©©ª««¬­­®®¯°°±ûŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°û‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°û‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯ûˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯>ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþ­ÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ=ÿþûÿ>ÿ@@vigor-0.016.orig/vigor/vigor_wav_0001.xcf0100644000076400007640000004500507103707231016565 0ustar cjw44cjw44gimp xcf v001€€ÿÿÿn p{u€ `ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ€BB›àpath 0BBŽB BŒB BŠB BŠB BŠB0B†B0B†B0B†B0B”BB–BB˜BBBBBBBBÓ €€Clipÿ     |€€” €€°,ù_ 0ÿ8ÿ8ÿ9ÿ;ÿBÿ7 ÿ5 ÿ2ÿ0ÿ/ÿ.ÿÿ-ÿÿ,ÿÿ,ÿÿ,ÿÿ}ÿ9ÿ9ÿ6ÿ3 ÿ2 ÿ5 ÿ4ÿ5ÿ6ÿ7ÿ6ÿ8ÿ8ÿ9ÿ8ÿ9ÿ;ÿ9ÿ9ÿ9ÿ:ÿ9ÿ9ÿ9ÿ:ÿ:ÿ:ÿ:ÿ:ÿ:ÿ:ÿÿ(ÿ ÿ(ÿ ÿ(ÿ ÿ(ÿÿ(ÿÿ*ÿÿ,ÿÿ.ÿÿ/ÿÿ/ÿÿ/ÿÿ/ÿ ÿ-ÿ,ÿ*ÿ+ÿ)ÿ!ÿÿ ÿÿþÿÿ þÿÿ'ÿ(ÿ(ÿ Lÿ9ÿ8ÿ6ÿ6ÿ:ÿÿ.ÿÿ.ÿ ÿ,ÿ ÿ+ÿÿ+ÿÿÿ,üÿÿÿÿ.ÿÿ.ÿÿ.ÿÿ" ÿ4 ÿ3ÿ.ÿ*ÿ*ÿ(ÿ ÿ6 ÿ5 ÿ7ÿ9ÿ9ÿ8ÿ9ÿ9ÿ:ÿ9ÿ:ÿ:ÿ:ÿ:ÿ9ÿ:ÿ:ÿ:ÿ9ÿ:ÿ:ÿ:ÿ;ÿ:ÿ:ÿÿÿ ÿÿÿ ÿÿ ÿÿ ÿÿ ÿ ÿ*ÿÿ,ÿÿ-ÿÿ/ÿÿ.ÿÿ.ÿÿ/ÿÿ0ÿÿ.ÿ-ÿ-ÿ+ÿ*ÿ*ÿÿüÿÿÿÿúÿÿÿÿùÿÿÿÿÿþÿÿþÿÿÿÿÿ ÿÿ *ÿÿ,ÿÿ-ÿÿ.ÿ/ÿ0ÿ2 ÿ8ÿ (ÿ(ÿ(ÿ(ÿ)ÿ)ÿ*ÿ+ÿ,ÿþÿ ÿ.ÿÿ0ÿÿ0ÿÿ2ÿÿ2ÿÿ0ÿÿ-ÿÿ* ÿÿ' ÿÿ$ ÿÿ! ÿ ÿ ÿÿ ÿÿ ÿÿ ÿÿ ÿÿÿÿþÿÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ;ÿ:ÿ:ÿ:ÿ;ÿ:ÿ:ÿ;ÿ:ÿ;ÿ;ÿ:ÿ:ÿ9ÿ9ÿ;ÿÀ ÿÿ.ÿÿ/ÿÿ1 ÿ2 ÿ4 ÿ7ÿjÿ)ÿ)ÿ*ÿ*ÿ,ÿ-ÿ.ÿ1ÿÿ2ÿÿ1ÿÿ1ÿÿ1ÿÿ1ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ1ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ3ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ2ÿÿ3ÿÿ3ÿÿ4ÿÿ4ÿÿ;ÿ;ÿ9ÿ9ÿ:ÿ:ÿ:ÿ9ÿ8ÿ8ÿ6ÿ4ÿ. ÿ1 ÿ3ÿ¸@@€€ Backgroundÿ      ¶€€ ÎIù€€ êí)ò9ö€°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ÂØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ€¿×ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþþ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææçèèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýþÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùúúûûüýýÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüýÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááâããääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûüÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôõõöö÷øøùùúûûÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúûÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùúÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïððññòóóôôõöö÷øøùùÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøùÑÒÒÓÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øøÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêëëììíîîïïðññòóóôôõöö÷øÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöö÷ÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõööÏÏÐÐÑÒÒÓÔÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõöÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääåææççèééêêëììíîîïïðññòóóôôõÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôôÍÍÎÏÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóôÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßàááââãääååæççèééêêëììíîîïïðññòóóËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòóËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññòÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðññÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììíîîïïðñÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïðÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖ××ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïïÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèééêêëììííîïÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííîÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììííÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììíÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââãääååæççèèéêêëììÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëìÄÄÅÆÆÇÈÈÉÉÊËËÌÍÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêëÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞßßààáââããäååæççèèéêêÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéêÂÃÃÄÄÅÆÆÇÈÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèéÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÛÜÝÝÞÞßààáââããäååæççèèÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæççèÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæçç¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÕÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäååæç¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå澿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäåå¾¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããäå½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáââããä¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâãã¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààááâ㻼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáá⺻¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÝÝÞÞßààáẺ»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßààṺº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßàูºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ×ØØÙÙÚÛÛÜÜÝÞÞßุ¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞß·¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞÞ··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÓÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜÝÞ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜÜݵ¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜܵµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÎÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛÜ´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛÛ³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚÛ³³´µµ¶··¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙÚ²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÉÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙÙ²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××ØÙ±²²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ××Ø°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖ×׈€ý‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­®†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­…†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««¬„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««ƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª«ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹ŒŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§€€‚‚ƒƒ„……†‡‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦~~€€‚‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤¥}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’“””••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤¤}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£¤|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢£{|}}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢¢{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽ‘’’““”••–——˜˜™šš›œœžŸŸ ¡¡¢z{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  ¡yz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ  yyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰ŠŠ‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸ xyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš›œœžŸŸwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžŸwwxyyz{{||}~~€€‚ƒƒ„……††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œžvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••–——˜˜™šš››œvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œuvvwwxyyz{{||}~~€€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››œtuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘’’““”••––—˜˜™šš››ttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šš›sttuvvwwxyyz{{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™ššrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜™šrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™qrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜qqrrsttuvvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜pqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡ˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—opqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––oopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••–nooppqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••mnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”•mmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”lmmnooppqrrsttuuvwwxyyzz{||}~~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““klmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’“kklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’jkklmmnooppqrrsttuuvwwxyyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘jjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘ijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽhhijjkklmmnooppqrrsttuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽfghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒŽffghhijjkklmmnooppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹ŒŒeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹Œdeeffghhijjkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠ‹cdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{||}}~€€‚‚ƒ„„……†‡‡ˆ‰‰ŠŠccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰Šbccdeeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰‰abccddeffghhiijkklmmnnoppqrrsstuuvwwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ‰aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡ˆ`aabccddeffghhiijkklmmnnoppqrrsstuuvvwxxyzz{{|}}~€€‚‚ƒ„„……†‡‡°±€ü²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÖÖׯ°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕÖ®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕÕ®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÑÒÒÓÔÔÕ­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔÔ¬­®®¯°°±±²³³´µµ¶¶·¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓÔ¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËÌÌÍÍÎÏÏÐÐÑÒÒÓ«¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒÒ««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑÒª««¬¬­®®¯°°±±²³³´µµ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐÐÑ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÇÇÈÈÉÊÊËËÌÍÍÎÏÏÐЩ©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏÏШ©©ª««¬¬­®®¯°°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎÏϧ¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍÎϧ§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍÍΦ§§¨©©ª««¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍͦ¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËËÌÍ¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËË̤¥¦¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊËˤ¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊË£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÊÊ¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉÉ¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²³³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈÉ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÅÅÆÆÇÈÈ ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇÈ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆÇŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­®®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆÆŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿ÀÀÁÁÂÃÃÄÄÅÆžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅžŸŸ  ¡¢¢£¤¤¥¥¦§§¨©©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹º»»¼¼½¾¾¿¿ÀÁÁÂÃÃÄœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÛœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÛ›œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µ¶¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁšš››œžŸŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁ™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°±±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿À˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾–—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼”•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»“””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº““””•––—˜˜™™š››œžžŸ  ¡¢¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹º’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸¸‘‘’““””•––—˜˜™™š››œžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··¸‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®¯¯°°±²²³³´µµ¶··‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶·‘‘’““””•––—˜˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ¶Ž‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´ŒŽŽ‘‘’““””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²Š‹ŒŒŽŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸ  ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°‰‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°ˆˆ‰ŠŠ‹ŒŒŽ‘‘’’“””•––——˜™™š››œœžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®®¯@@vigor-0.016.orig/vigor/v2cp0001.xcf0100664000076400007640000016731207103707232015306 0ustar cjw44cjw44gimp xcf file€€BB_€€ Backgroundÿ     €€&î¾€€B:–uÕ±Òɯ°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÐÐÑÑÓÔÕæÖ¯¯°°±²²³´´µµ¶··¸¹¹ºº»»¼½¾¾ö¿ÀÁÁÂÂÃÄÄÅÅîÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÓÔåÕ®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾ø¿ÀÁÁÂÂÃÄÄìÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑáÒÓÔÔ­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾â¿ÀÁÁÂÂÃÃÄÄÅÅÆÇÇÈÈÉÊËËÌÌÍÍÎÏÐÐÑÑÒÞÔ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÁÁ¦ÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÏÐÐÑÑÒÒ¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÇÈÈÉÉËËÌÌÍÎÎÏÏÐÑÑÚÌ«¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÁÁ·ÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÏÇÊÂg««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»¼¼½½¾¾¿ÀÀÁÁÂÂÃÃÄÅÆÆÇÈÈÉâÊËÆÄÅÆƵhC ª««¬­­®¯¯°°±²²³´´µµ·¸¹õº»¼¼½½¾¾¿ÀÁÁÂÃØÄÅÆÇÇÈÈÿ¾º¶··¸‰7´j)ªª««¬­­®¯¯°°±²²³´´µµ·ñ¸¹ºº»¼¼½½¾¾¿ÀÀÁÁÕÂÃÄÅÆÆÇżµ´´µµ¶·±X¹‹ h»©ªª««¬­­®¯¯°°±²²³´´µµ·¸ç¹ºº»¼¼½½¾¾¿¿ÀÁÁÂÂÃÄÅÆÆ´³´´á»¾Àm¶M–ÏϨ©ªª««¬­­®¯¯°°±²²³³´µµ·¸û¹ºº»¼¼Ì½¾¾¿¿ÀÀÁÂÂÃÄÁ²²³³¶¾ÂÇÉJ%Ä>HÍÏΨ¨©ªª««¬­­®¯¯°°±²²³³´µµ·¸¹Ìº»¼¼½½¾¾¿¿ÀÀÁÂÃı±²µ¼ÄÈÇȦ¸°+È—’V§¨¨©ªª««¬­­®¯¯°°±²²ý³´µµ·¸ù¹ºº»¼¼½½Î¾¿¿ÀÀ½Âoœ£±¥Y­«aCÆ"DÑ-¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ·¸ù¹ºº»¼¼½½Î¾¿¿|N*  ^=‰D*M%œ€MÀnyɦ¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ·ú¸¹ºº»¼¼½Î¾ZkdŽ®K&G,”¼CA¥-†>5šÃ¢Œ=»«rC]¢ƒ|£¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²ý³´µµ·¸¹È´­qt&I£”ElpzUŽw££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µµ·Ñ¸¹¹iR,3+ˆrBb¶œPt­ ®6$JQ^f’«N¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±²²³³´µµ¶¶·¸·D›©©r8®³µ§Œ6"n{>@IŽ—2¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®û¯°°±²²î³´µµ¶¶·¶§¯¨£R$n 8FxR´]-š¨>¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯¯°±²²³³´µµ¶·µ´·o™9f=DR)=#+¥ŸE ¡¡¢££¤¤¥¦¦§¨¨©©ª««Û¬­­®®¯°°±±²³³´µµ¶2* 3K?~0J+à,šQŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬¬­®®¯°°è±²³³´µµƒ|q¤u&#Mf3ÈŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬­­®®¯°°±±²³³´µ¶±’^ ",SL1ÉžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©¨©ª««¬­­®®¯°°±±²³?›µ´¦SDpD2+FJrSæžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©¨©ª«¬¬ô­®®¯°°±±²µµòŽGM]‹b,EY>W>ê žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©ýšª¬¬å­®®¯°°±±´µª]5@h«W4X4ý 朞žŸŸ ¡¡¢££¤¤¥¦¦§¨§¨¨©ª«¬¬ì­®®¯°°››² 7Cd7,8ûþœïžžŸŸ ¡¡¢££¤¤¥¦¦§§¨ü©ª«¬¬î­®®¯°°±ªvM[# ü-n[œžžŸŸ ¡¡¢££¤¤¥¦¦§ú¨©©ª>¬¬­ü®¯°ô0…2šœÄj ‡CrY(M#<âJñìäÌ“‰Š‹‹ŒŽŽ‘‘’““”••–ä—˜™™j™›œ—Ÿ—ZfO=5:J øJîæã߮剉Š‹‹ŒŒŽŽ‘‘’““””••––—˜˜ékš›š›<&œeA ² ýHÆããǸŽxˆ‰‰Š‹‹ŒŒŽŽ‘‘’“’“”••––—˜˜=™šš™ÄŸ›^77>^rÃ$dÛããæó»bPFˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’“’“”••––——™š™™<Ÿ¸u^@ù%Ëäãéóôôíɯ°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÐÐÑÑÓÔÕæÖ¯¯°°±²²³´´µµ¶··¸¹¹ºº»»¼½¾¾ö¿ÀÁÁÂÂÃÄÄÅÅîÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÓÔåÕ®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾ø¿ÀÁÁÂÂÃÄÄìÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑáÒÓÔÔ­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾â¿ÀÁÁÂÂÃÃÄÄÅÅÆÇÇÈÈÉÊËËÌÌÍÍÎÏÐÐÑÑÒÞÔ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÁÁ¦ÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÏÐÐÑÑÒÒ¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÇÈÈÉÉËËÌÌÍÎÎÏÏÐÑÑÚÌ«¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÁÁ·ÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÏÇÊÂg««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»¼¼½½¾¾¿ÀÀÁÁÂÂÃÃÄÅÆÆÇÈÈÉâÊËÆÄÅÆƵhC ª««¬­­®¯¯°°±²²³´´µµ·¸¹õº»¼¼½½¾¾¿ÀÁÁÂÃØÄÅÆÇÇÈÈÿ¾º¶··¸‰7´j)ªª««¬­­®¯¯°°±²²³´´µµ·ñ¸¹ºº»¼¼½½¾¾¿ÀÀÁÁÕÂÃÄÅÆÆÇżµ´´µµ¶·±X¹‹ h»©ªª««¬­­®¯¯°°±²²³´´µµ·¸ç¹ºº»¼¼½½¾¾¿¿ÀÁÁÂÂÃÄÅÆÆ´³´´á»¾Àm¶M–ÏϨ©ªª««¬­­®¯¯°°±²²³³´µµ·¸û¹ºº»¼¼Ì½¾¾¿¿ÀÀÁÂÂÃÄÁ²²³³¶¾ÂÇÉJ%Ä>HÍÏΨ¨©ªª««¬­­®¯¯°°±²²³³´µµ·¸¹Ìº»¼¼½½¾¾¿¿ÀÀÁÂÃı±²µ¼ÄÈÇȦ¸°+È—’V§¨¨©ªª««¬­­®¯¯°°±²²ý³´µµ·¸ù¹ºº»¼¼½½Î¾¿¿ÀÀ½Âoœ£±¥Y­«aCÆ"DÑ-¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ·¸ù¹ºº»¼¼½½Î¾¿¿|N*  ^=‰D*M%œ€MÀnyɦ¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ·ú¸¹ºº»¼¼½Î¾ZkdŽ®K&G,”¼CA¥-†>5šÃ¢Œ=»«rC]¢ƒ|£¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²ý³´µµ·¸¹È´­qt&I£”ElpzUŽw££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µµ·Ñ¸¹¹iR,3+ˆrBb¶œPt­ ®6$JQ^f’«N¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±²²³³´µµ¶¶·¸·D›©©r8®³µ§Œ6"n{>@IŽ—2¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®û¯°°±²²î³´µµ¶¶·¶§¯¨£R$n 8FxR´]-š¨>¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯¯°±²²³³´µµ¶·µ´·o™9f=DR)=#+¥ŸE ¡¡¢££¤¤¥¦¦§¨¨©©ª««Û¬­­®®¯°°±±²³³´µµ¶2* 3K?~0J+à,šQŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬¬­®®¯°°è±²³³´µµƒ|q¤u&#Mf3ÈŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬­­®®¯°°±±²³³´µ¶±’^ ",SL1ÉžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©¨©ª««¬­­®®¯°°±±²³?›µ´¦SDpD2+FJrSæžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©¨©ª«¬¬ô­®®¯°°±±²µµòŽGM]‹b,EY>W>ê žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©ýšª¬¬å­®®¯°°±±´µª]5@h«W4X4ý 朞žŸŸ ¡¡¢££¤¤¥¦¦§¨§¨¨©ª«¬¬ì­®®¯°°››² 7Cd7,8ûþœïžžŸŸ ¡¡¢££¤¤¥¦¦§§¨ü©ª«¬¬î­®®¯°°±ªvM[# ü-n[œžžŸŸ ¡¡¢££¤¤¥¦¦§ú¨©©ª>¬¬­ü®¯°ô0…2šœÄj ‡CrY(M#<âJñìäÌ“‰Š‹‹ŒŽŽ‘‘’““”••–ä—˜™™j™›œ—Ÿ—ZfO=5:J øJîæã߮剉Š‹‹ŒŒŽŽ‘‘’““””••––—˜˜ékš›š›<&œeA ² ýHÆããǸŽxˆ‰‰Š‹‹ŒŒŽŽ‘‘’“’“”••––—˜˜=™šš™ÄŸ›^77>^rÃ$dÛããæó»bPFˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’“’“”••––——™š™™<Ÿ¸u^@ù%Ëäãéóôôíɯ°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÐÐÑÑÓÔÕæÖ¯¯°°±²²³´´µµ¶··¸¹¹ºº»»¼½¾¾ö¿ÀÁÁÂÂÃÄÄÅÅîÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑÓÔåÕ®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾ø¿ÀÁÁÂÂÃÄÄìÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÑáÒÓÔÔ­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾â¿ÀÁÁÂÂÃÃÄÄÅÅÆÇÇÈÈÉÊËËÌÌÍÍÎÏÐÐÑÑÒÞÔ­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÁÁ¦ÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÏÐÐÑÑÒÒ¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÇÈÈÉÉËËÌÌÍÎÎÏÏÐÑÑÚÌ«¬­­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½½¾¾¿ÀÁÁ·ÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÎÏÏÇÊÂg««¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»¼¼½½¾¾¿ÀÀÁÁÂÂÃÃÄÅÆÆÇÈÈÉâÊËÆÄÅÆƵhC ª««¬­­®¯¯°°±²²³´´µµ·¸¹õº»¼¼½½¾¾¿ÀÁÁÂÃØÄÅÆÇÇÈÈÿ¾º¶··¸‰7´j)ªª««¬­­®¯¯°°±²²³´´µµ·ñ¸¹ºº»¼¼½½¾¾¿ÀÀÁÁÕÂÃÄÅÆÆÇżµ´´µµ¶·±X¹‹ h»©ªª««¬­­®¯¯°°±²²³´´µµ·¸ç¹ºº»¼¼½½¾¾¿¿ÀÁÁÂÂÃÄÅÆÆ´³´´á»¾Àm¶M–ÏϨ©ªª««¬­­®¯¯°°±²²³³´µµ·¸û¹ºº»¼¼Ì½¾¾¿¿ÀÀÁÂÂÃÄÁ²²³³¶¾ÂÇÉJ%Ä>HÍÏΨ¨©ªª««¬­­®¯¯°°±²²³³´µµ·¸¹Ìº»¼¼½½¾¾¿¿ÀÀÁÂÃı±²µ¼ÄÈÇȦ¸°+È—’V§¨¨©ªª««¬­­®¯¯°°±²²ý³´µµ·¸ù¹ºº»¼¼½½Î¾¿¿ÀÀ½Âoœ£±¥Y­«aCÆ"DÑ-¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ·¸ù¹ºº»¼¼½½Î¾¿¿|N*  ^=‰D*M%œ€MÀnyɦ¦§¨¨©ªª««¬­­®®¯°°±²²³³´µµ·ú¸¹ºº»¼¼½Î¾ZkdŽ®K&G,”¼CA¥-†>5šÃ¢Œ=»«rC]¢ƒ|£¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²ý³´µµ·¸¹È´­qt&I£”ElpzUŽw££¤¤¥¦¦§¨¨©©ª««¬­­®®¯°°±²²³³´µµ·Ñ¸¹¹iR,3+ˆrBb¶œPt­ ®6$JQ^f’«N¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±²²³³´µµ¶¶·¸·D›©©r8®³µ§Œ6"n{>@IŽ—2¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®û¯°°±²²î³´µµ¶¶·¶§¯¨£R$n 8FxR´]-š¨>¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯¯°±²²³³´µµ¶·µ´·o™9f=DR)=#+¥ŸE ¡¡¢££¤¤¥¦¦§¨¨©©ª««Û¬­­®®¯°°±±²³³´µµ¶2* 3K?~0J+à,šQŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬¬­®®¯°°è±²³³´µµƒ|q¤u&#Mf3ÈŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬­­®®¯°°±±²³³´µ¶±’^ ",SL1ÉžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©¨©ª««¬­­®®¯°°±±²³?›µ´¦SDpD2+FJrSæžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©¨©ª«¬¬ô­®®¯°°±±²µµòŽGM]‹b,EY>W>ê žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©ýšª¬¬å­®®¯°°±±´µª]5@h«W4X4ý 朞žŸŸ ¡¡¢££¤¤¥¦¦§¨§¨¨©ª«¬¬ì­®®¯°°››² 7Cd7,8ûþœïžžŸŸ ¡¡¢££¤¤¥¦¦§§¨ü©ª«¬¬î­®®¯°°±ªvM[# ü-n[œžžŸŸ ¡¡¢££¤¤¥¦¦§ú¨©©ª>¬¬­ü®¯°ô0…2šœÄj ‡CrY(M#<âJñìäÌ“‰Š‹‹ŒŽŽ‘‘’““”••–ä—˜™™j™›œ—Ÿ—ZfO=5:J øJîæã߮剉Š‹‹ŒŒŽŽ‘‘’““””••––—˜˜ékš›š›<&œeA ² ýHÆããǸŽxˆ‰‰Š‹‹ŒŒŽŽ‘‘’“’“”••––—˜˜=™šš™ÄŸ›^77>^rÃ$dÛããæó»bPFˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’“’“”••––——™š™™<Ÿ¸u^@ù%Ëäãéóôôí.þþýþ þþýþþþýþþüýþýþþþýþþþýþþþýþþõýþýþþýþþýýþþûýþþýþ þýþþýýþýûþýþþýýþþýýþýþþýþþüýþýþþýþýþýýþýýþþýþþûýþýþýýþýþþýýüþýþýýûþýýþýýþüýþýþþöýþýþþýþýýþþþýþþýþýýþýþþûýþþýþþüýþþýýûþýýþýýþýýþýýýþýþþý þýþýüþýþýýþýþþýþþþýþþýþòýþþýþþýýþýþþýþþýþþýþþýþþýýþýþöýþýýþþýýþýýþþýþþþýþþþýþþýüþýýþþýþýýþýþþþýþ þúýþþýþýýþýúþýþþýþþþýþþýþýþýþþýþþýüþýýþþþýþþûýþýýþ þýþýóþýþþýþþýýþþýþþþýþþýþýþýþýþþýþþøýþþýþþýþþúýþþýþýýþýýþýýüþýýþþþýþ þúýþýþþýýþþýþþýþûýþþýþþþýþþýùþýýþýýþþüýþþýýþýþþýþþþýþþüýþýþþýõþýýþýþýþýýþþýþþýýýþýþþþýþþýþýþþýýøþýþýýþþýýýþýþþþýþþþýþþýýþýýþþýýþýþþýýþüýþýþþþýþþýþùýþþýýþýýþþýþþõýþþýýþþýþþýýþýþþýýùþýýþþýþþûýþþýþþþýþþþýþ þýþýþüýþþýýþþýþþýóþýþýýþþýýþýüýýþþýþþýýþýþþþýþþýøüþþýþþýþþ÷ýþþýþþýþýýþýýþýýþþýþþýüþýýþþþýþþûýþþýþþþýþþýþþýýþýüþýüþþüýþýþ þýýþýýþþýýøþýýþþýþýýüþýýþþûýþþýþþþýþþýýþýýýþýþþýùþýýþþýþþþýþþþýþþúýþýýþýýùþýýþþýþþýþýþþýþþþýþþýþýýþýýþýþý÷þýýþýþýýþþþýþþøýþþýþþýþþþýþþýüþýþýýþýþýþùýþþýþýþ þýþþýýüþýýþþýþýþûýþýýþþýþûýþýýþþýþýþþýþ)þýþýýþýþþýþýþûýþþýþþýþþýþþýþýþýþýýþýýþýþýþýþýþùýþþýþýþþþýþþýüþýþýýüþýþýýþþýþþþýþþþýþþþýþþýøþýýþýýþýýøþýýþþýýþþúýþýþýþþýþýþýýþýýþýþþýþþþýþþýþýþúýþýþþýýþüýþþýýüþýýþþþýþþýýþýýþþýýþýûþýþýþþýþûýþþýþþûýþþýþþþýþþüýþþýýûþýþþýýþýþþýýüþýýþþþýþþþýþþûýþþýþþýþýþþýýþûýþýýþþýþýþþýþ þýþýøþýýþýýþýýüþýýþ*þýøþýýþþýýþþüýþýþþûýþýýþþýýþýþþýþýþýþýøþýýþþýþýýþþýþþý÷þýþþýýþþýýþùýþýýþýþþýþüýþýþþûýþþýþþýýþýýþýþþýþþþýþþýþýþþýýþþýýýþýþþüýþþýýùþýýþýýþþýþþýþþþýþþþýþþýþýýþýýþýþþýþþýþþýýûþýýþýýþþýýûþýýþýýþþýýþþýýþöýþýþýýþýþýý÷þýýþýüýþýýþþýýþþýýþþýýþþýþþýþþýþþýøþýüýþýþýýýþýþþýûþýþþýýþûýþþýþþýþýþýþýüþýþýýþýþþýþþýþýþõýþþýýþþýþþýýýþýþþþýþþýýþýþþýþýüþýþýýþþýýþþýýþþýýþýþýýþýýþþýþþýþþýýþýþûýþýþýýþþýþþýþüýþþýýþýýþýþþýýþýþþýýþýþþþýþþýøþýýþýýþýýþýþþýýþþýýþýþýþýýþýþþýþýþýüþýýþþýþýýþýþþýüþýþýýþýþøýþýýþþýþþýþýýþýþþýþþýþþýøþýýþýþþýýþþýýøþýýþýþýþþýù×ØØÙÙÚÛÛÝÞ÷ßààáââããääüæççèèéëÚìííîîïððñòòóôôõõö÷÷øùùúúûüüýýúÖ××ØÙÙÚÛÛóÜÝÞÞßààáââããääþæççè×éêëëìííîïïððñòòôôõõö÷÷øùùúúûüüýúÕÖ×ØØÙÙÚÛÛÜõÝÞßààáââããääÐæçææççéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüüúÔÕÖ×ØØÙÙÚÛÛÜÝßùàáââããääåÓæçèéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüúÒÓÖÖ×ØØÙÙÚÛÛÜöÝÞ××ÃËÛããääåæèÖéêêëëìííîïïððòòóôôõõö÷÷øøùúúûúÃŽ1‹ÑØØÙÙÚÛÛñ¥…†–¯˜†`BU™ääååáæççèééêëëìííîïïðñòòóôôõõö÷÷øøùúúâ7¯É7/ÐØØÙÚÚÁdKZV\„¢‹‚’´lY°ãäååÁæçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúúa¼½¶+9FW}Ù§CKž×ÜÝÝÞßßàÆ _Tããäå倻æçèèéêêëëìííîïððñòòóóôõõö÷÷øøùúK u™„‹Ša7T«ÛÛÜÜÛ×̾ÖÕÈbaâããäååææçèèéêêëëìííîïððñòòóóôõõö÷÷øøú¸Fwgœ°¸sk¢¹ÒÕÔ¥:5‘ÙàÊUláââãäååææçèèéêêëëìííïïððñòòóóôõõö÷÷øú¨½¾¼1ȱ:3%0"¨Â ¯ÝÞÛÔÃKuááüâãäååÇæçèèéêêëëìíîîïððñòòóóôõõö÷÷úi»Ñ´;L21/<ŠÂIJNµÉÒÜÖÙ³EwàááÃâãäååææççèéêêëëìíîîïððñòòóóôõõö÷ú¢ÏGqk01†Ð××Á´ÅÅÇÍÜÏ4^¦ààáãäÇåææçèèéêêëëííîîïððñòòóóôõõöúÍ6­)HÌ™P<3žÖ×Ⱥ5¼ÆÅÅǸ`'©Þßàà€káâããäååææçèèééêëìííîîïððñòòóóôõõúD2³1‹¹bj¯^7ªH59Lg=- $8m£ÛßßààáâããäååææçèèééêëìííîîïððñòòóóôõúP±78j“1f¸XŠ¦Ÿ$ G--!2ÖÞßßááâããäååææçèèééëëìííîîïððñòòóóôúBuro;t}g•ÑÖ®$ .SØÛÞàááâããääåææçèèéêëëìííîîïððñòòóóúI,L7‡(8ARqk?i-`£¥E(qÍÃÜààááâããääåææçèèéêëëìííîîïððñòòóú25Bxx>Z(P>G?V){@’ÚÛÓEÝààááâããääåææçèééêëëìííîîïððñòòú(>8®=±7:7^gC)'3‰ÛÛÜÜÝÝÞßààááâããääåææçèééêëëìííîîïððñòú9$ln.#3Dv¦Ã´m"±.€ÛÛ×ÚrÌÞßßàááâããääåææèèééêëëìííîîïððñú:%ßœ'i’vKF8)]ŽÚÍÜÞßßàááâãã¦äåæçèèééêëëìííîîïððú[¬f<6+ $$!&<ˆq 91HÒ@ÛÚqÝÞßßàááâããäååæçèèééêëëìííîîïðú'i Iø0'/.Í:kAw"K<-ËØÚŸÝÞÞßßàááâããäåææçèèééêëëìííîîïú6<ù$)Eõ,) `yÔãÝÞßßàááâããäåææçèèééêëëììíîîú ôHŘ8ÝËØoÛÝÞßßàááâããäåææçèèééêëëììíîú ÇS'2lq*˜¬€ÖØØžÛÜÝÞÞßßàááâãääåææçèèééêëëììíúß4ƒng4a#ÕÙÚÚÜÝÞÞßßàááâããäååôæççèééêëëìúþ ý7JÑ6@(HWžÅ#ØÙË!ÜÜÝÝÞßßàááâããäååææççèééêëëúþÚ>Ì` l¦*%Œ:2Á<1ÜÕ¢ÎÝÞßßààáâããåæçõèééêëúýÎ>= 4A/W&8C§?ÏÚ¹4ÜÝÝÞßßàááâããäååææççèééêúü ØÛ)('ZÔ”S×ÙÚÛÜÜÝÝÞßßàááòâãäååææççèéé®ö YĈ&ߎ¾Ç0/ „¨|R¹~;˜ÙÙÚÛÜÜË"Þßßàááóâãäååææççèéú÷¿àÆRÏ18+ KCAÑÄm}fŸBs×ÙÙÚÛÜÜÝÝÞßßàááââãäååææççèú÷ °âòÖzÐ$ ‰¶MrH( •ÕÔaK§ÙÙÚÚÛÜÜÝÝÞßßàááââãäååææççúéŠÑäì⫆8GJ 2;³[Qä¨ÕÕ­DØÙÙÚÚÛÜÜÝÝÞßßàááââãäååüæçúÄ"~¿ããô÷öº:wy=)]›‰‰o›3ŠÌÕÒF ×ØØÙÚÚÛÜÜÝÝÞßßàááââããååææúœ ŠÈããäãçí¼- s6AÍ¿Æ·)ÃÔÐ7¯××ØØÙÙÚÛÜÜÝÝÞßßàááââãäååæú.@Àãóòïêãçº# D>»Ðв‹ËÓÏ,½Ö××Á¿t;ÚÛÜÜÝÝÞßßàááââãäååúÝ3,VÛëüþýýøèä·= T›H ${¿ÆiÑÍÌ$ÈÕÖ××û¤dÙÚÜÜÝìÞßßàááââãäåúòööíèýþýýþÛú߉ ‚ 'Xˆ;ÉÎÕÕÖ××ØØÆHÚÜÜÝÃÞßßàááââãäúèõôìùýúøúýþýýó´%% ?šD`Vƒ/2§¬-®7³ ÒÔÕÕÖ××ØØÙÚÚÜÜÝïÞßßàááââãúéòíçýõããøæþþýþâDç U&1ƒ•+›Ì£M#7?ÒÒËÔÕÖ××ûØÙÚÚÜÜÝÃÞßßàááââú«æ¦EÑåãäããëþþýì^ )2­R _9NÉ•_wX²ÑÆ*ÉÕÕÖ××ØØÙÚÚÜÜÝìÞßßàááâúKp;3ÁääããæóþþøójNò e$?CňnbŠÑÑÒÒôÔÕÕÖ××ØØÙÚÚÜÜÝòÞßßààáú4uG7¹äããäçøþýþúv \ &,HÁ}`·ÑÑÒãÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààú.:9³ããýçúýýèú~/FI›S[¼ÐÐÑÑÒûÔÕÕÖ××ûØÙÚÚÜÜÝÔÞßßàú 3¶êèèçýþþýýæo}i…&=6*ÎÎÏÐÐÑÑÁЧÄÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßú0”Ñùýþþýþýû¢75U'~ÌÍÎÎÏÐÐÑÑÓÔåÕÖ××ØØÙÚÚÛÜÜÝÝÞßú 3pèýþýýäìŠ oU´TkXgÉÌÌͳÌÏÐÐÑÑÓÆÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞú  =¼æûìîðëÙn  %Y„†<”˼ž1ÃÎÏÐÐÑÃÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝú ^ãäãÛ|~ ;h”g'<ÄÎÎÏÐÐÑûÒÓÓÔÕÕòÖ×ØØÙÚÚÛÜÜÝúñ -Vy“P± Ò2`G|“k.ˆÅÌÎÎÏÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÜÜúþö(" %¶ì4t"/ fH¦©‡ ÄÎÎÏÏéÌÎÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÜúò¶Åì1B-…o0/=A/ªÍÎÎèÉlLÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛúóVß¾ó(E}Á/ct¤¾ÉÈÈã©+¨ÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚúò ±ï»´ö:M>‰¿69wºÈÈão8ªËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚúóîôä‘Ô /‘[#>“ÄÅÈ®£h·ÊËÌÌÍÎÎÏÏÐÑÒÒÓÓÔÕÕÖÖ×ØØÙúóJéõõãt ×";+h6[…c[|ÁÉÊÊËËÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØúô ’òööÞ_÷,¶—Be»4âƒÄÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÒÒÓÓÔÕÕÖÖ×Øúó8ïõööÖMñ%˜e‹€5"ƒÄÇÈÈÉËìÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×úó 0âìõööž?ñ 1‚[‚»µAL¿ÆÇÇÈÈþÉËËìÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖú9ò -W£äãçôöà^Nð•(5ºr@¾ÅÆÇÇÈÈáÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖú¶.*'&3ÞðããøçòÓw•hï+D,IŸ™Sd¿ÅÅÆÇÇÈÈìÊËËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕÕ®ù×ØØÙÙÚÛÛÝÞ÷ßààáââããääüæççèèéëÚìííîîïððñòòóôôõõö÷÷øùùúúûüüýýúÖ××ØÙÙÚÛÛóÜÝÞÞßààáââããääþæççè×éêëëìííîïïððñòòôôõõö÷÷øùùúúûüüýúÕÖ×ØØÙÙÚÛÛÜõÝÞßààáââããääÐæçææççéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüüúÔÕÖ×ØØÙÙÚÛÛÜÝßùàáââããääåÓæçèéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüúÒÓÖÖ×ØØÙÙÚÛÛÜöÝÞ××ÃËÛããääåæèÖéêêëëìííîïïððòòóôôõõö÷÷øøùúúûúÃŽ1‹ÑØØÙÙÚÛÛñ¥…†–¯˜†`BU™ääååáæççèééêëëìííîïïðñòòóôôõõö÷÷øøùúúâ7¯É7/ÐØØÙÚÚÁdKZV\„¢‹‚’´lY°ãäååÁæçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúúa¼½¶+9FW}Ù§CKž×ÜÝÝÞßßàÆ _Tããäå倻æçèèéêêëëìííîïððñòòóóôõõö÷÷øøùúK u™„‹Ša7T«ÛÛÜÜÛ×̾ÖÕÈbaâããäååææçèèéêêëëìííîïððñòòóóôõõö÷÷øøú¸Fwgœ°¸sk¢¹ÒÕÔ¥:5‘ÙàÊUláââãäååææçèèéêêëëìííïïððñòòóóôõõö÷÷øú¨½¾¼1ȱ:3%0"¨Â ¯ÝÞÛÔÃKuááüâãäååÇæçèèéêêëëìíîîïððñòòóóôõõö÷÷úi»Ñ´;L21/<ŠÂIJNµÉÒÜÖÙ³EwàááÃâãäååææççèéêêëëìíîîïððñòòóóôõõö÷ú¢ÏGqk01†Ð××Á´ÅÅÇÍÜÏ4^¦ààáãäÇåææçèèéêêëëííîîïððñòòóóôõõöúÍ6­)HÌ™P<3žÖ×Ⱥ5¼ÆÅÅǸ`'©Þßàà€káâããäååææçèèééêëìííîîïððñòòóóôõõúD2³1‹¹bj¯^7ªH59Lg=- $8m£ÛßßààáâããäååææçèèééêëìííîîïððñòòóóôõúP±78j“1f¸XŠ¦Ÿ$ G--!2ÖÞßßááâããäååææçèèééëëìííîîïððñòòóóôúBuro;t}g•ÑÖ®$ .SØÛÞàááâããääåææçèèéêëëìííîîïððñòòóóúI,L7‡(8ARqk?i-`£¥E(qÍÃÜààááâããääåææçèèéêëëìííîîïððñòòóú25Bxx>Z(P>G?V){@’ÚÛÓEÝààááâããääåææçèééêëëìííîîïððñòòú(>8®=±7:7^gC)'3‰ÛÛÜÜÝÝÞßààááâããääåææçèééêëëìííîîïððñòú9$ln.#3Dv¦Ã´m"±.€ÛÛ×ÚrÌÞßßàááâããääåææèèééêëëìííîîïððñú:%ßœ'i’vKF8)]ŽÚÍÜÞßßàááâãã¦äåæçèèééêëëìííîîïððú[¬f<6+ $$!&<ˆq 91HÒ@ÛÚqÝÞßßàááâããäååæçèèééêëëìííîîïðú'i Iø0'/.Í:kAw"K<-ËØÚŸÝÞÞßßàááâããäåææçèèééêëëìííîîïú6<ù$)Eõ,) `yÔãÝÞßßàááâããäåææçèèééêëëììíîîú ôHŘ8ÝËØoÛÝÞßßàááâããäåææçèèééêëëììíîú ÇS'2lq*˜¬€ÖØØžÛÜÝÞÞßßàááâãääåææçèèééêëëììíúß4ƒng4a#ÕÙÚÚÜÝÞÞßßàááâããäååôæççèééêëëìúþ ý7JÑ6@(HWžÅ#ØÙË!ÜÜÝÝÞßßàááâããäååææççèééêëëúþÚ>Ì` l¦*%Œ:2Á<1ÜÕ¢ÎÝÞßßààáâããåæçõèééêëúýÎ>= 4A/W&8C§?ÏÚ¹4ÜÝÝÞßßàááâããäååææççèééêúü ØÛ)('ZÔ”S×ÙÚÛÜÜÝÝÞßßàááòâãäååææççèéé®ö YĈ&ߎ¾Ç0/ „¨|R¹~;˜ÙÙÚÛÜÜË"Þßßàááóâãäååææççèéú÷¿àÆRÏ18+ KCAÑÄm}fŸBs×ÙÙÚÛÜÜÝÝÞßßàááââãäååææççèú÷ °âòÖzÐ$ ‰¶MrH( •ÕÔaK§ÙÙÚÚÛÜÜÝÝÞßßàááââãäååææççúéŠÑäì⫆8GJ 2;³[Qä¨ÕÕ­DØÙÙÚÚÛÜÜÝÝÞßßàááââãäååüæçúÄ"~¿ããô÷öº:wy=)]›‰‰o›3ŠÌÕÒF ×ØØÙÚÚÛÜÜÝÝÞßßàááââããååææúœ ŠÈããäãçí¼- s6AÍ¿Æ·)ÃÔÐ7¯××ØØÙÙÚÛÜÜÝÝÞßßàááââãäååæú.@Àãóòïêãçº# D>»Ðв‹ËÓÏ,½Ö××Á¿t;ÚÛÜÜÝÝÞßßàááââãäååúÝ3,VÛëüþýýøèä·= T›H ${¿ÆiÑÍÌ$ÈÕÖ××û¤dÙÚÜÜÝìÞßßàááââãäåúòööíèýþýýþÛú߉ ‚ 'Xˆ;ÉÎÕÕÖ××ØØÆHÚÜÜÝÃÞßßàááââãäúèõôìùýúøúýþýýó´%% ?šD`Vƒ/2§¬-®7³ ÒÔÕÕÖ××ØØÙÚÚÜÜÝïÞßßàááââãúéòíçýõããøæþþýþâDç U&1ƒ•+›Ì£M#7?ÒÒËÔÕÖ××ûØÙÚÚÜÜÝÃÞßßàááââú«æ¦EÑåãäããëþþýì^ )2­R _9NÉ•_wX²ÑÆ*ÉÕÕÖ××ØØÙÚÚÜÜÝìÞßßàááâúKp;3ÁääããæóþþøójNò e$?CňnbŠÑÑÒÒôÔÕÕÖ××ØØÙÚÚÜÜÝòÞßßààáú4uG7¹äããäçøþýþúv \ &,HÁ}`·ÑÑÒãÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààú.:9³ããýçúýýèú~/FI›S[¼ÐÐÑÑÒûÔÕÕÖ××ûØÙÚÚÜÜÝÔÞßßàú 3¶êèèçýþþýýæo}i…&=6*ÎÎÏÐÐÑÑÁЧÄÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßú0”Ñùýþþýþýû¢75U'~ÌÍÎÎÏÐÐÑÑÓÔåÕÖ××ØØÙÚÚÛÜÜÝÝÞßú 3pèýþýýäìŠ oU´TkXgÉÌÌͳÌÏÐÐÑÑÓÆÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞú  =¼æûìîðëÙn  %Y„†<”˼ž1ÃÎÏÐÐÑÃÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝú ^ãäãÛ|~ ;h”g'<ÄÎÎÏÐÐÑûÒÓÓÔÕÕòÖ×ØØÙÚÚÛÜÜÝúñ -Vy“P± Ò2`G|“k.ˆÅÌÎÎÏÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÜÜúþö(" %¶ì4t"/ fH¦©‡ ÄÎÎÏÏéÌÎÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÜúò¶Åì1B-…o0/=A/ªÍÎÎèÉlLÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛúóVß¾ó(E}Á/ct¤¾ÉÈÈã©+¨ÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚúò ±ï»´ö:M>‰¿69wºÈÈão8ªËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚúóîôä‘Ô /‘[#>“ÄÅÈ®£h·ÊËÌÌÍÎÎÏÏÐÑÒÒÓÓÔÕÕÖÖ×ØØÙúóJéõõãt ×";+h6[…c[|ÁÉÊÊËËÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØúô ’òööÞ_÷,¶—Be»4âƒÄÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÒÒÓÓÔÕÕÖÖ×Øúó8ïõööÖMñ%˜e‹€5"ƒÄÇÈÈÉËìÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×úó 0âìõööž?ñ 1‚[‚»µAL¿ÆÇÇÈÈþÉËËìÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖú9ò -W£äãçôöà^Nð•(5ºr@¾ÅÆÇÇÈÈáÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖú¶.*'&3ÞðããøçòÓw•hï+D,IŸ™Sd¿ÅÅÆÇÇÈÈìÊËËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕÕ®ù×ØØÙÙÚÛÛÝÞ÷ßààáââããääüæççèèéëÚìííîîïððñòòóôôõõö÷÷øùùúúûüüýýúÖ××ØÙÙÚÛÛóÜÝÞÞßààáââããääþæççè×éêëëìííîïïððñòòôôõõö÷÷øùùúúûüüýúÕÖ×ØØÙÙÚÛÛÜõÝÞßààáââããääÐæçææççéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüüúÔÕÖ×ØØÙÙÚÛÛÜÝßùàáââããääåÓæçèéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüúÒÓÖÖ×ØØÙÙÚÛÛÜöÝÞ××ÃËÛããääåæèÖéêêëëìííîïïððòòóôôõõö÷÷øøùúúûúÃŽ1‹ÑØØÙÙÚÛÛñ¥…†–¯˜†`BU™ääååáæççèééêëëìííîïïðñòòóôôõõö÷÷øøùúúâ7¯É7/ÐØØÙÚÚÁdKZV\„¢‹‚’´lY°ãäååÁæçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúúa¼½¶+9FW}Ù§CKž×ÜÝÝÞßßàÆ _Tããäå倻æçèèéêêëëìííîïððñòòóóôõõö÷÷øøùúK u™„‹Ša7T«ÛÛÜÜÛ×̾ÖÕÈbaâããäååææçèèéêêëëìííîïððñòòóóôõõö÷÷øøú¸Fwgœ°¸sk¢¹ÒÕÔ¥:5‘ÙàÊUláââãäååææçèèéêêëëìííïïððñòòóóôõõö÷÷øú¨½¾¼1ȱ:3%0"¨Â ¯ÝÞÛÔÃKuááüâãäååÇæçèèéêêëëìíîîïððñòòóóôõõö÷÷úi»Ñ´;L21/<ŠÂIJNµÉÒÜÖÙ³EwàááÃâãäååææççèéêêëëìíîîïððñòòóóôõõö÷ú¢ÏGqk01†Ð××Á´ÅÅÇÍÜÏ4^¦ààáãäÇåææçèèéêêëëííîîïððñòòóóôõõöúÍ6­)HÌ™P<3žÖ×Ⱥ5¼ÆÅÅǸ`'©Þßàà€káâããäååææçèèééêëìííîîïððñòòóóôõõúD2³1‹¹bj¯^7ªH59Lg=- $8m£ÛßßààáâããäååææçèèééêëìííîîïððñòòóóôõúP±78j“1f¸XŠ¦Ÿ$ G--!2ÖÞßßááâããäååææçèèééëëìííîîïððñòòóóôúBuro;t}g•ÑÖ®$ .SØÛÞàááâããääåææçèèéêëëìííîîïððñòòóóúI,L7‡(8ARqk?i-`£¥E(qÍÃÜààááâããääåææçèèéêëëìííîîïððñòòóú25Bxx>Z(P>G?V){@’ÚÛÓEÝààááâããääåææçèééêëëìííîîïððñòòú(>8®=±7:7^gC)'3‰ÛÛÜÜÝÝÞßààááâããääåææçèééêëëìííîîïððñòú9$ln.#3Dv¦Ã´m"±.€ÛÛ×ÚrÌÞßßàááâããääåææèèééêëëìííîîïððñú:%ßœ'i’vKF8)]ŽÚÍÜÞßßàááâãã¦äåæçèèééêëëìííîîïððú[¬f<6+ $$!&<ˆq 91HÒ@ÛÚqÝÞßßàááâããäååæçèèééêëëìííîîïðú'i Iø0'/.Í:kAw"K<-ËØÚŸÝÞÞßßàááâããäåææçèèééêëëìííîîïú6<ù$)Eõ,) `yÔãÝÞßßàááâããäåææçèèééêëëììíîîú ôHŘ8ÝËØoÛÝÞßßàááâããäåææçèèééêëëììíîú ÇS'2lq*˜¬€ÖØØžÛÜÝÞÞßßàááâãääåææçèèééêëëììíúß4ƒng4a#ÕÙÚÚÜÝÞÞßßàááâããäååôæççèééêëëìúþ ý7JÑ6@(HWžÅ#ØÙË!ÜÜÝÝÞßßàááâããäååææççèééêëëúþÚ>Ì` l¦*%Œ:2Á<1ÜÕ¢ÎÝÞßßààáâããåæçõèééêëúýÎ>= 4A/W&8C§?ÏÚ¹4ÜÝÝÞßßàááâããäååææççèééêúü ØÛ)('ZÔ”S×ÙÚÛÜÜÝÝÞßßàááòâãäååææççèéé®ö YĈ&ߎ¾Ç0/ „¨|R¹~;˜ÙÙÚÛÜÜË"Þßßàááóâãäååææççèéú÷¿àÆRÏ18+ KCAÑÄm}fŸBs×ÙÙÚÛÜÜÝÝÞßßàááââãäååææççèú÷ °âòÖzÐ$ ‰¶MrH( •ÕÔaK§ÙÙÚÚÛÜÜÝÝÞßßàááââãäååææççúéŠÑäì⫆8GJ 2;³[Qä¨ÕÕ­DØÙÙÚÚÛÜÜÝÝÞßßàááââãäååüæçúÄ"~¿ããô÷öº:wy=)]›‰‰o›3ŠÌÕÒF ×ØØÙÚÚÛÜÜÝÝÞßßàááââããååææúœ ŠÈããäãçí¼- s6AÍ¿Æ·)ÃÔÐ7¯××ØØÙÙÚÛÜÜÝÝÞßßàááââãäååæú.@Àãóòïêãçº# D>»Ðв‹ËÓÏ,½Ö××Á¿t;ÚÛÜÜÝÝÞßßàááââãäååúÝ3,VÛëüþýýøèä·= T›H ${¿ÆiÑÍÌ$ÈÕÖ××û¤dÙÚÜÜÝìÞßßàááââãäåúòööíèýþýýþÛú߉ ‚ 'Xˆ;ÉÎÕÕÖ××ØØÆHÚÜÜÝÃÞßßàááââãäúèõôìùýúøúýþýýó´%% ?šD`Vƒ/2§¬-®7³ ÒÔÕÕÖ××ØØÙÚÚÜÜÝïÞßßàááââãúéòíçýõããøæþþýþâDç U&1ƒ•+›Ì£M#7?ÒÒËÔÕÖ××ûØÙÚÚÜÜÝÃÞßßàááââú«æ¦EÑåãäããëþþýì^ )2­R _9NÉ•_wX²ÑÆ*ÉÕÕÖ××ØØÙÚÚÜÜÝìÞßßàááâúKp;3ÁääããæóþþøójNò e$?CňnbŠÑÑÒÒôÔÕÕÖ××ØØÙÚÚÜÜÝòÞßßààáú4uG7¹äããäçøþýþúv \ &,HÁ}`·ÑÑÒãÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßààú.:9³ããýçúýýèú~/FI›S[¼ÐÐÑÑÒûÔÕÕÖ××ûØÙÚÚÜÜÝÔÞßßàú 3¶êèèçýþþýýæo}i…&=6*ÎÎÏÐÐÑÑÁЧÄÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞßßú0”Ñùýþþýþýû¢75U'~ÌÍÎÎÏÐÐÑÑÓÔåÕÖ××ØØÙÚÚÛÜÜÝÝÞßú 3pèýþýýäìŠ oU´TkXgÉÌÌͳÌÏÐÐÑÑÓÆÔÕÕÖ××ØØÙÚÚÛÜÜÝÝÞú  =¼æûìîðëÙn  %Y„†<”˼ž1ÃÎÏÐÐÑÃÒÓÓÔÕÕÖ××ØØÙÚÚÛÜÜÝÝú ^ãäãÛ|~ ;h”g'<ÄÎÎÏÐÐÑûÒÓÓÔÕÕòÖ×ØØÙÚÚÛÜÜÝúñ -Vy“P± Ò2`G|“k.ˆÅÌÎÎÏÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÜÜúþö(" %¶ì4t"/ fH¦©‡ ÄÎÎÏÏéÌÎÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛÜúò¶Åì1B-…o0/=A/ªÍÎÎèÉlLÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚÛúóVß¾ó(E}Á/ct¤¾ÉÈÈã©+¨ÌÍÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚÚúò ±ï»´ö:M>‰¿69wºÈÈão8ªËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØÙÚúóîôä‘Ô /‘[#>“ÄÅÈ®£h·ÊËÌÌÍÎÎÏÏÐÑÒÒÓÓÔÕÕÖÖ×ØØÙúóJéõõãt ×";+h6[…c[|ÁÉÊÊËËÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×ØØúô ’òööÞ_÷,¶—Be»4âƒÄÈÈÉÊÊËÌÌÍÍÎÏÏÐÑÒÒÓÓÔÕÕÖÖ×Øúó8ïõööÖMñ%˜e‹€5"ƒÄÇÈÈÉËìÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖ×úó 0âìõööž?ñ 1‚[‚»µAL¿ÆÇÇÈÈþÉËËìÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖÖú9ò -W£äãçôöà^Nð•(5ºr@¾ÅÆÇÇÈÈáÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓÔÕÕÖú¶.*'&3ÞðããøçòÓw•hï+D,IŸ™Sd¿ÅÅÆÇÇÈÈìÊËËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕÕ®þýþþýþþþýþþúúýýþýþþþýþþíýþþýýþýþþýýþýþþýþþýýþûýþþýþþýúþýýþýùþýþýþþýýþýñþýýþýýþýýþýýþýþþýþùúýþýþþýýþþýýþ ýþýûþýþýþþýúýþþýüþýýþþýþùýþþýýþýýþüýþþýýþýúýþþûýþýýþþýûþýýþýýþýþþýýþýýþýþþþúýýþþýýýþýþþýüþýýþþþýþþýþýþþúþþýþýþýúþýýþþýýôþýýþþýþýýþþýýþýþþúþþþýþþýþýþþýýüþýþýýþýþþúþþýýþýþþ÷ýþþýýþýþýýþýþýûþýýþýýþüúýþýýþûýþýýþþüýþþýýþýþýûþýþþýýþþúýýþýþõýþþýþýþþýþýýþþýþþýþþýýþþúþþýýþýþþýþýþýþýþýþúúýþþýþþýþþýþþýýþýþþýþýþþúýýþýþýþ ýþþýýýþýþþýþøúýýþþýýþþýþýýþýýþþý ýþûýþýþýýþøúýýþýýþýýþýûþýýþýýþýüþýýþþüúýýþþýþûýþýþýýþþýýþöýþýþýýþýýþþüúýýþþýöþýýþýþþýþýýýþýþþýþýþüúýýþþýþþýýþýþþýýûþýýþýýýþýþþþýþþúúýýþþýýöþýýþþýýþþýýýþüýýþþýýþýúýþþûýþýýþþýýþýþþýþþýý þþýþþþúþþýüþýýþþýþþýþþýüþýþýýøþýþþýþýþþþýþþüúþýþþþýþþýþþýýþ ýþýþûúýýþýýþýýþýýþþý ýþýüþýýþþûúýýþýýþýþýþþýýþþýýþþýþþúúýýþýþþýþþýý÷þýþýýþýþýýþþýýýþýþþýýþýýýþýþþþúýýúþýþýþý ýþþýýþýûþýþþýýûþýýþýýþüýþýþþùúýþþýþýýþþýýøþýýþþýþýýþýþý þüúýþýýûþýýþýýüþýýþþûýþýýþþýûþýýþýýýþýþ þüúýþýýûþýýþýýýþýþþýýþýýúþýýþþýýþþýýþýýþýþ þõúýþýýþýýþþýýþþýýþþýýóþýþýýþþýþýýþýýþýþþýþþþýþ þþ®ýýûþýýþýýþþýýòþýýþýýþýþýýþþýýþýþþýýûþýþýþ þûúýýþý ýþý þýþýýþýýþþýýüþýýþ þþúý ýûþýþþýýþúýþþýýþþýþþýýþþýýùþýýþþýþ þüúýþý ýúþýþýýþþýýþýýþýþýûþýýþýýþþýþ þûýþþúýýþþýýþþýýþþýýþýþýùþýþýýþýýþûýþþýþþþýþþýúüýýüþýþýýþýþþýþþþýþþýþþýýþìýþýþþýþþýþþúýýþýüýþýýþýþýýþýýúþýýþþý ýþþýþ þþúýýþýþýþþýýþýþùýþýýþþýý÷þýþþýýþýþþûýþþýþþùýþúýþþýýþþýýþþýþþýþþýýúþýþýþýýþýþþýýþþýþþþýþþþúýýúþýýþþýýþýþþýýöþýþþýþýþþýýùþýýþþýþþúýþþýýþþþúýýþþýýþüýþýþþýþþýþþýþýþþýýþüýþýþþþýþþûúüýþýýüþýýþþýþþýýüþýýþþþýþþüýþþýýþýþýþþýþþüúýþýýþýþýþýþýþþýýþýþþýþþþýþþþýþþüúþþýýþþýýþþýþþýþþýýþþýýþýþýøþýþýþþýþþüýþúýýþþýýþýþýþþýýþ ýýþýþþüýþýþþöýþýþúþþýþýýþýúþýýþþýýýþýþþüýþþýýþþýýùþýþýþýþþþýþþþúýýôþýþþýþýþýýþýýøþýþýýþýþþ÷ýþýýþýýþýýøþýýþýþýþþþúýýûþýþþýýüþýþýýùþýþýþþýýþúýþþýýþþýþúýþýþýþþþúþþýüþýþýýþýþþýýþýþýýþýýþþýýþþýþþþúýýþùýþýþýýþþþýþþýöþýþýýþýþþýýþýþûýþþýþ þþúýýþýþýþýþþýýþùýþýþþýþþý þþúýýòþýþþýþþýþþýþþýýüþýþýýþþýþþ ýþý þþúý ýüþýþýýþýþþýýýþýþþûýþþýþþýþþýýþý þþúýýûþýýþýýüþýýþþþýþþøýþþýþýþýýüþýþýýþý þþúýýüþýýþþüýþþýýþýýþýýþüýþþýýþþý ýþý þþúþþýüþýýþþýþ ýþýüþýþýýþýþý þüúþýþþýþþýþþýúþýþýþýýüþýþýýþýþþýýüþýýþþý þþúýýþþýýþýþýþýþþýþþýþýþþýþþý þþúýý÷þýýþýþþýþþþýþþýýþýýýþýþþýþúýþþýýþþý þûúýýþýýüþýýþþýþýþþýýüþýþýýþúýþýþýþþý þüúþþýýþüýýþþýýþýþýþýþùýþýýþþýýþý þúúþýþþýýþþýþþþýþþýþþýýþýþþýýþý þ®‡èˆ‰‰Š‹‹ŒŒŽŽ‘‘’’““”••––ê™™–œX<^…ã½ããŠèôóô󆇇ˆ‰‰Š‹‹ŒŒŽŽ˜‘‘’÷“”••–•–™›@™‘k"*o‡} % oƒL¡èóóâↆ‡‡ˆ‰‰Š‹‹ŒŒŽŽj‘’““”••–•–——˜=<œ›‹S   ! •·¿éôóÜ|`…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘Ã’““””•––—˜—Ä;œ–iN‡~ 7_Œ¨éóóîÄ£ˆ„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘’¿“””•––—˜—™›œ—n"i€LâóôÇ{~Ê„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““È”••Ã˜–—››¢# Cv 4©ó׊ŽñÓƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽà‘‘’““””•jØ–-c+^.kÂW­®h—ó󂃄„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’’“”“Ö•”•k­Y_ U0Iú$]—°óó‚샄„…††‡‡ˆ‰‰Š‹‹ŒŒŽâ‘‘’““”’•–——”(LK2^(*‘l û>ˆóóî‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒýŽû‘‘’““Ê•––˜uH5Z('K=" NŠóóô‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹Œ‹ŒŽü‘‘’’Ç“i•‘ 3?8X3yƒ EÅóô€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽ÷‘‘’“’“<ÔB‚xE%$}ä~€‚‚ƒ„„…††‡‡ˆˆ‰‰ŠŠ‹ŒŒŽü‘’““î‹%³W G?%s“…%}û~€ý‚ƒ„„†ò‡ˆˆ‰‰ŠŠ‹‹ŒŽŽé‘’““Œ;#Z+ >’F#dj&þ|}ö~€€‚‚ƒ„„†‡Üˆ‰‰ŠŠ‹ŒŒŽŽŽjm‘’’“w:+ $ù$#||}Ì~€€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽ‘‘’”“„[9M U5ú!L#{||}æ~€€‚‚ƒ„„…†…‡‡ˆ‰‰ŠŠ‹‹ŒŽŽå‘š²’ŽZ 8j$;y“Ezï{||}}~€€‚‚ƒ„„……‡öˆ‰‰ŠŠ‹ŒŒŽŽçŠj6’ŽxN ,U"i{Nzï{||}}~€€‚‚ƒ„„……‡Ýˆ‰‰ŠŠ‹ŒŒŒeAeB‚Q"+$=*/Dyz|}ô~€€‚‚ƒ„„……ý†‡‰‰ŠÂ‹ŒŒŽŒ]Q¤O uuC…G=0`&+Bxxyzz{||}}~€€‚‚ƒ„„……p’ˆ‰‰ÝŠ‹ŒŒŽ ~+#S—™A9\Žxxûyzz{||ó}~€€‚ƒƒ„„……‡ˆæ‰ŠŠ‹‹ŒŒ}y‡Šzq^8,TK  óJmwwxxyzz|}ô~€€‚‚ƒ„„……‡ˆè‰ŠŠ‹ŒŒ†I8f€‚{ifo$râB6/(vvwxxyyz{||}}~ €‚‚ƒ„„……‡ˆû‰ŠŠ‹ŒŒå’¤W 8*fV ˆ©2Ç›dƒ{¹ÀoT­M;ttuuvvwxxyzz{||}}~€€‚‚ƒƒ„……·†~6{‰ŠŠ‹ŒŒ‹„€€ƒŽ˜x^IQ?5(¶ÆBX´Œsstuuvvwxxyzz{||}}~~€€‚‚ƒƒ„„……††ˆˆ‰ŠŠ‹‹é‡€„ŽŒ}j\Vb{t¶ÍÇ. µ¶ssþtuuèvwxxyzz{||}}~~€€‚‚ƒƒ„……†ˆ‰ÇŠ‹‹‰‚ŽŠƒ’“fÃÍÉ( rrsstuuvvwxxyzz{||}}~~€€‚‚ƒƒ„……†ˆä‰ŠŠ‹‰~€ŽŽ‰€‚‘c~¼ÌÌͱB\ŸSqrrãstuuvvwwxyyz{||}}~~€€‚‚ƒƒ„……†ˆ‰ñŠ‡‚~‰Œ„€…‹~ ÌÌØͽ²É²Xqqrrsstuuvvwxxyyz{|{}}~~€€‚‚ƒƒ„……†ˆß‰Š‰†€‹€…ŒcZËÌÌÍÌÌÍͲmppqrrsstuuøvwxxyyz{{}õ~€€‚‚ƒƒ„……†ˆ‰ñ†}ŠŒˆ€‰ylÄÌÍÍÌÌü͹˜ppïqrrssttuuvwwxyyz{{}~ö€€‚‚ƒƒ„……†ˆô‰Š‰‹‹ˆ~as ·ÍÍÌèÍÆÂooppqrrssttuvvwxxyzz{{}~ö€€‚‚ƒƒ„……ò†‡ˆˆ‰ŠŠ‹†9I‹»ÍÍþÌÍÍèÌÈnnoppqrrssttuvvwxxyzz{{ó|}}~€€‚‚ƒ„……ñ†‡ˆˆ‰Šˆ$j«ÉÌÌÍÌÌÍüÌÍËnnìoppqrrssttuvvwxxyzz{{ó|}~~€€‚‚ƒ„……÷‡ˆ š:Ÿ¸¿ÌÌÍÌÍÌæÍ»mmnnoopqrrssttuvvwxxyyz{{ô}~~€€‚ƒ„……÷kš«ÀĽÃËÍÍÌÍÌÍlémnnoopqrrssttuvvwxxyzz{{}à~€€‚ƒƒ„„……fŽ½ÌË¿½»¨«ËÍÌÌÍÌͦ¤ÍÍlémnnoopqrrssttuvwwxxyzz{{|~ꀀ‚ƒƒ„„}M«ÊÌÈÀƒÃËÌÍÍÌß©x…²ÍÍkkllmnnoopqrrssttuvwwxxyzz{{ê|~~ˆ€€‘|`Zhw¾ÌÌÊJ)ÁÉÍÍÚ:ËÍÇŸbŽºÍjjkllmnnoopqrrssttuvwwxxyzz{{Þ|…¯oltŠ? '¯»ÉÌÌÀ š¾ÈÍ̺uËͽl³ŠX¢Íjj‚kllmnnoopqrrsstuuvwwxxyzz{{|spS  =¹ÇÊÌË3V½¾ÌÊ9ÇÌ˸9geÃËÌiijjkllmnnoopqrrsstuuvwwxxyyz{Š  %‹ÀË̸…‚µº¾ËÍÍÈ’euu$ggijkílmnnoopqrrsstuuvvwxxèd"rq  ly|e &L–Ÿ¾ÁÁô­B[@ffggiijökllmnnoopqqsÃtuuvvwxxyzz{{p# 3PC.gOW‚£x¤½Áw^W eefgghiijjkllmmnoopqqs×tuuvvwxxyzz{{p) %:f BiLN‰‘lmoO2)5/eeüfggiijökllmnnoppqqstÚuvvwxxyzz{{vW8'%/B<#)2@rkRYxyvcMGddûefggiijökllmmnoppqqsâtuuvvwxxyzz{{uO6T|oPUk}[@{yyxxyzý_$ddefþgiijökllmmnoppqqstöuvvwxxyzz{{|ò}~~‚‚ƒ„ƒ||ü}{{ccùdeefggiiõjkllmnnoppqqsôtuuvvwxxyzz{{|}ô~‚‚ƒ„„……††‡úƒ‚bbcddýefggiõjkllmnnoppqqsötuuvvwxxyzzþ{||ò}~~‚‚ƒ„„……††ü‡ˆˆbbþcddíefgghiijjkllmnnoppqqsâtuuvvwxxyyzz{||}}~~€‚ƒ„„……††ã‡ˆaabbcddeefgghiijjkllmnnoopqqsótuuvvwxxyyzz||}ô~€‚„„……††ã‡``aabccdeefgghiijjkllmnnoppqqs÷tuuvvwxxyyþz||ó}~~€€‚‚ƒƒ…††þ‡``öabbccdeefggiýjkllúmnoopqqõrsttuuvwwxyyz|}³~€‚ƒƒ„„††‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡èˆ‰‰Š‹‹ŒŒŽŽ‘‘’’““”••––ê™™–œX<^…ã½ããŠèôóô󆇇ˆ‰‰Š‹‹ŒŒŽŽ˜‘‘’÷“”••–•–™›@™‘k"*o‡} % oƒL¡èóóâↆ‡‡ˆ‰‰Š‹‹ŒŒŽŽj‘’““”••–•–——˜=<œ›‹S   ! •·¿éôóÜ|`…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘Ã’““””•––—˜—Ä;œ–iN‡~ 7_Œ¨éóóîÄ£ˆ„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘’¿“””•––—˜—™›œ—n"i€LâóôÇ{~Ê„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““È”••Ã˜–—››¢# Cv 4©ó׊ŽñÓƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽà‘‘’““””•jØ–-c+^.kÂW­®h—ó󂃄„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’’“”“Ö•”•k­Y_ U0Iú$]—°óó‚샄„…††‡‡ˆ‰‰Š‹‹ŒŒŽâ‘‘’““”’•–——”(LK2^(*‘l û>ˆóóî‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒýŽû‘‘’““Ê•––˜uH5Z('K=" NŠóóô‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹Œ‹ŒŽü‘‘’’Ç“i•‘ 3?8X3yƒ EÅóô€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽ÷‘‘’“’“<ÔB‚xE%$}ä~€‚‚ƒ„„…††‡‡ˆˆ‰‰ŠŠ‹ŒŒŽü‘’““î‹%³W G?%s“…%}û~€ý‚ƒ„„†ò‡ˆˆ‰‰ŠŠ‹‹ŒŽŽé‘’““Œ;#Z+ >’F#dj&þ|}ö~€€‚‚ƒ„„†‡Üˆ‰‰ŠŠ‹ŒŒŽŽŽjm‘’’“w:+ $ù$#||}Ì~€€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽ‘‘’”“„[9M U5ú!L#{||}æ~€€‚‚ƒ„„…†…‡‡ˆ‰‰ŠŠ‹‹ŒŽŽå‘š²’ŽZ 8j$;y“Ezï{||}}~€€‚‚ƒ„„……‡öˆ‰‰ŠŠ‹ŒŒŽŽçŠj6’ŽxN ,U"i{Nzï{||}}~€€‚‚ƒ„„……‡Ýˆ‰‰ŠŠ‹ŒŒŒeAeB‚Q"+$=*/Dyz|}ô~€€‚‚ƒ„„……ý†‡‰‰ŠÂ‹ŒŒŽŒ]Q¤O uuC…G=0`&+Bxxyzz{||}}~€€‚‚ƒ„„……p’ˆ‰‰ÝŠ‹ŒŒŽ ~+#S—™A9\Žxxûyzz{||ó}~€€‚ƒƒ„„……‡ˆæ‰ŠŠ‹‹ŒŒ}y‡Šzq^8,TK  óJmwwxxyzz|}ô~€€‚‚ƒ„„……‡ˆè‰ŠŠ‹ŒŒ†I8f€‚{ifo$râB6/(vvwxxyyz{||}}~ €‚‚ƒ„„……‡ˆû‰ŠŠ‹ŒŒå’¤W 8*fV ˆ©2Ç›dƒ{¹ÀoT­M;ttuuvvwxxyzz{||}}~€€‚‚ƒƒ„……·†~6{‰ŠŠ‹ŒŒ‹„€€ƒŽ˜x^IQ?5(¶ÆBX´Œsstuuvvwxxyzz{||}}~~€€‚‚ƒƒ„„……††ˆˆ‰ŠŠ‹‹é‡€„ŽŒ}j\Vb{t¶ÍÇ. µ¶ssþtuuèvwxxyzz{||}}~~€€‚‚ƒƒ„……†ˆ‰ÇŠ‹‹‰‚ŽŠƒ’“fÃÍÉ( rrsstuuvvwxxyzz{||}}~~€€‚‚ƒƒ„……†ˆä‰ŠŠ‹‰~€ŽŽ‰€‚‘c~¼ÌÌͱB\ŸSqrrãstuuvvwwxyyz{||}}~~€€‚‚ƒƒ„……†ˆ‰ñŠ‡‚~‰Œ„€…‹~ ÌÌØͽ²É²Xqqrrsstuuvvwxxyyz{|{}}~~€€‚‚ƒƒ„……†ˆß‰Š‰†€‹€…ŒcZËÌÌÍÌÌÍͲmppqrrsstuuøvwxxyyz{{}õ~€€‚‚ƒƒ„……†ˆ‰ñ†}ŠŒˆ€‰ylÄÌÍÍÌÌü͹˜ppïqrrssttuuvwwxyyz{{}~ö€€‚‚ƒƒ„……†ˆô‰Š‰‹‹ˆ~as ·ÍÍÌèÍÆÂooppqrrssttuvvwxxyzz{{}~ö€€‚‚ƒƒ„……ò†‡ˆˆ‰ŠŠ‹†9I‹»ÍÍþÌÍÍèÌÈnnoppqrrssttuvvwxxyzz{{ó|}}~€€‚‚ƒ„……ñ†‡ˆˆ‰Šˆ$j«ÉÌÌÍÌÌÍüÌÍËnnìoppqrrssttuvvwxxyzz{{ó|}~~€€‚‚ƒ„……÷‡ˆ š:Ÿ¸¿ÌÌÍÌÍÌæÍ»mmnnoopqrrssttuvvwxxyyz{{ô}~~€€‚ƒ„……÷kš«ÀĽÃËÍÍÌÍÌÍlémnnoopqrrssttuvvwxxyzz{{}à~€€‚ƒƒ„„……fŽ½ÌË¿½»¨«ËÍÌÌÍÌͦ¤ÍÍlémnnoopqrrssttuvwwxxyzz{{|~ꀀ‚ƒƒ„„}M«ÊÌÈÀƒÃËÌÍÍÌß©x…²ÍÍkkllmnnoopqrrssttuvwwxxyzz{{ê|~~ˆ€€‘|`Zhw¾ÌÌÊJ)ÁÉÍÍÚ:ËÍÇŸbŽºÍjjkllmnnoopqrrssttuvwwxxyzz{{Þ|…¯oltŠ? '¯»ÉÌÌÀ š¾ÈÍ̺uËͽl³ŠX¢Íjj‚kllmnnoopqrrsstuuvwwxxyzz{{|spS  =¹ÇÊÌË3V½¾ÌÊ9ÇÌ˸9geÃËÌiijjkllmnnoopqrrsstuuvwwxxyyz{Š  %‹ÀË̸…‚µº¾ËÍÍÈ’euu$ggijkílmnnoopqrrsstuuvvwxxèd"rq  ly|e &L–Ÿ¾ÁÁô­B[@ffggiijökllmnnoopqqsÃtuuvvwxxyzz{{p# 3PC.gOW‚£x¤½Áw^W eefgghiijjkllmmnoopqqs×tuuvvwxxyzz{{p) %:f BiLN‰‘lmoO2)5/eeüfggiijökllmnnoppqqstÚuvvwxxyzz{{vW8'%/B<#)2@rkRYxyvcMGddûefggiijökllmmnoppqqsâtuuvvwxxyzz{{uO6T|oPUk}[@{yyxxyzý_$ddefþgiijökllmmnoppqqstöuvvwxxyzz{{|ò}~~‚‚ƒ„ƒ||ü}{{ccùdeefggiiõjkllmnnoppqqsôtuuvvwxxyzz{{|}ô~‚‚ƒ„„……††‡úƒ‚bbcddýefggiõjkllmnnoppqqsötuuvvwxxyzzþ{||ò}~~‚‚ƒ„„……††ü‡ˆˆbbþcddíefgghiijjkllmnnoppqqsâtuuvvwxxyyzz{||}}~~€‚ƒ„„……††ã‡ˆaabbcddeefgghiijjkllmnnoopqqsótuuvvwxxyyzz||}ô~€‚„„……††ã‡``aabccdeefgghiijjkllmnnoppqqs÷tuuvvwxxyyþz||ó}~~€€‚‚ƒƒ…††þ‡``öabbccdeefggiýjkllúmnoopqqõrsttuuvwwxyyz|}³~€‚ƒƒ„„††‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡èˆ‰‰Š‹‹ŒŒŽŽ‘‘’’““”••––ê™™–œX<^…ã½ããŠèôóô󆇇ˆ‰‰Š‹‹ŒŒŽŽ˜‘‘’÷“”••–•–™›@™‘k"*o‡} % oƒL¡èóóâↆ‡‡ˆ‰‰Š‹‹ŒŒŽŽj‘’““”••–•–——˜=<œ›‹S   ! •·¿éôóÜ|`…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘Ã’““””•––—˜—Ä;œ–iN‡~ 7_Œ¨éóóîÄ£ˆ„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘’¿“””•––—˜—™›œ—n"i€LâóôÇ{~Ê„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““È”••Ã˜–—››¢# Cv 4©ó׊ŽñÓƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽà‘‘’““””•jØ–-c+^.kÂW­®h—ó󂃄„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’’“”“Ö•”•k­Y_ U0Iú$]—°óó‚샄„…††‡‡ˆ‰‰Š‹‹ŒŒŽâ‘‘’““”’•–——”(LK2^(*‘l û>ˆóóî‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒýŽû‘‘’““Ê•––˜uH5Z('K=" NŠóóô‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹Œ‹ŒŽü‘‘’’Ç“i•‘ 3?8X3yƒ EÅóô€‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽ÷‘‘’“’“<ÔB‚xE%$}ä~€‚‚ƒ„„…††‡‡ˆˆ‰‰ŠŠ‹ŒŒŽü‘’““î‹%³W G?%s“…%}û~€ý‚ƒ„„†ò‡ˆˆ‰‰ŠŠ‹‹ŒŽŽé‘’““Œ;#Z+ >’F#dj&þ|}ö~€€‚‚ƒ„„†‡Üˆ‰‰ŠŠ‹ŒŒŽŽŽjm‘’’“w:+ $ù$#||}Ì~€€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽ‘‘’”“„[9M U5ú!L#{||}æ~€€‚‚ƒ„„…†…‡‡ˆ‰‰ŠŠ‹‹ŒŽŽå‘š²’ŽZ 8j$;y“Ezï{||}}~€€‚‚ƒ„„……‡öˆ‰‰ŠŠ‹ŒŒŽŽçŠj6’ŽxN ,U"i{Nzï{||}}~€€‚‚ƒ„„……‡Ýˆ‰‰ŠŠ‹ŒŒŒeAeB‚Q"+$=*/Dyz|}ô~€€‚‚ƒ„„……ý†‡‰‰ŠÂ‹ŒŒŽŒ]Q¤O uuC…G=0`&+Bxxyzz{||}}~€€‚‚ƒ„„……p’ˆ‰‰ÝŠ‹ŒŒŽ ~+#S—™A9\Žxxûyzz{||ó}~€€‚ƒƒ„„……‡ˆæ‰ŠŠ‹‹ŒŒ}y‡Šzq^8,TK  óJmwwxxyzz|}ô~€€‚‚ƒ„„……‡ˆè‰ŠŠ‹ŒŒ†I8f€‚{ifo$râB6/(vvwxxyyz{||}}~ €‚‚ƒ„„……‡ˆû‰ŠŠ‹ŒŒå’¤W 8*fV ˆ©2Ç›dƒ{¹ÀoT­M;ttuuvvwxxyzz{||}}~€€‚‚ƒƒ„……·†~6{‰ŠŠ‹ŒŒ‹„€€ƒŽ˜x^IQ?5(¶ÆBX´Œsstuuvvwxxyzz{||}}~~€€‚‚ƒƒ„„……††ˆˆ‰ŠŠ‹‹é‡€„ŽŒ}j\Vb{t¶ÍÇ. µ¶ssþtuuèvwxxyzz{||}}~~€€‚‚ƒƒ„……†ˆ‰ÇŠ‹‹‰‚ŽŠƒ’“fÃÍÉ( rrsstuuvvwxxyzz{||}}~~€€‚‚ƒƒ„……†ˆä‰ŠŠ‹‰~€ŽŽ‰€‚‘c~¼ÌÌͱB\ŸSqrrãstuuvvwwxyyz{||}}~~€€‚‚ƒƒ„……†ˆ‰ñŠ‡‚~‰Œ„€…‹~ ÌÌØͽ²É²Xqqrrsstuuvvwxxyyz{|{}}~~€€‚‚ƒƒ„……†ˆß‰Š‰†€‹€…ŒcZËÌÌÍÌÌÍͲmppqrrsstuuøvwxxyyz{{}õ~€€‚‚ƒƒ„……†ˆ‰ñ†}ŠŒˆ€‰ylÄÌÍÍÌÌü͹˜ppïqrrssttuuvwwxyyz{{}~ö€€‚‚ƒƒ„……†ˆô‰Š‰‹‹ˆ~as ·ÍÍÌèÍÆÂooppqrrssttuvvwxxyzz{{}~ö€€‚‚ƒƒ„……ò†‡ˆˆ‰ŠŠ‹†9I‹»ÍÍþÌÍÍèÌÈnnoppqrrssttuvvwxxyzz{{ó|}}~€€‚‚ƒ„……ñ†‡ˆˆ‰Šˆ$j«ÉÌÌÍÌÌÍüÌÍËnnìoppqrrssttuvvwxxyzz{{ó|}~~€€‚‚ƒ„……÷‡ˆ š:Ÿ¸¿ÌÌÍÌÍÌæÍ»mmnnoopqrrssttuvvwxxyyz{{ô}~~€€‚ƒ„……÷kš«ÀĽÃËÍÍÌÍÌÍlémnnoopqrrssttuvvwxxyzz{{}à~€€‚ƒƒ„„……fŽ½ÌË¿½»¨«ËÍÌÌÍÌͦ¤ÍÍlémnnoopqrrssttuvwwxxyzz{{|~ꀀ‚ƒƒ„„}M«ÊÌÈÀƒÃËÌÍÍÌß©x…²ÍÍkkllmnnoopqrrssttuvwwxxyzz{{ê|~~ˆ€€‘|`Zhw¾ÌÌÊJ)ÁÉÍÍÚ:ËÍÇŸbŽºÍjjkllmnnoopqrrssttuvwwxxyzz{{Þ|…¯oltŠ? '¯»ÉÌÌÀ š¾ÈÍ̺uËͽl³ŠX¢Íjj‚kllmnnoopqrrsstuuvwwxxyzz{{|spS  =¹ÇÊÌË3V½¾ÌÊ9ÇÌ˸9geÃËÌiijjkllmnnoopqrrsstuuvwwxxyyz{Š  %‹ÀË̸…‚µº¾ËÍÍÈ’euu$ggijkílmnnoopqrrsstuuvvwxxèd"rq  ly|e &L–Ÿ¾ÁÁô­B[@ffggiijökllmnnoopqqsÃtuuvvwxxyzz{{p# 3PC.gOW‚£x¤½Áw^W eefgghiijjkllmmnoopqqs×tuuvvwxxyzz{{p) %:f BiLN‰‘lmoO2)5/eeüfggiijökllmnnoppqqstÚuvvwxxyzz{{vW8'%/B<#)2@rkRYxyvcMGddûefggiijökllmmnoppqqsâtuuvvwxxyzz{{uO6T|oPUk}[@{yyxxyzý_$ddefþgiijökllmmnoppqqstöuvvwxxyzz{{|ò}~~‚‚ƒ„ƒ||ü}{{ccùdeefggiiõjkllmnnoppqqsôtuuvvwxxyzz{{|}ô~‚‚ƒ„„……††‡úƒ‚bbcddýefggiõjkllmnnoppqqsötuuvvwxxyzzþ{||ò}~~‚‚ƒ„„……††ü‡ˆˆbbþcddíefgghiijjkllmnnoppqqsâtuuvvwxxyyzz{||}}~~€‚ƒ„„……††ã‡ˆaabbcddeefgghiijjkllmnnoopqqsótuuvvwxxyyzz||}ô~€‚„„……††ã‡``aabccdeefgghiijjkllmnnoppqqs÷tuuvvwxxyyþz||ó}~~€€‚‚ƒƒ…††þ‡``öabbccdeefggiýjkllúmnoopqqõrsttuuvwwxyyz|}³~€‚ƒƒ„„††‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††þýýþýþþýüþýþýýþýþýûþýþýþþýþýþþýþþýþïýþýýþýýþþýþþýþþýþþýþýþöýþþýþþýþþýýöþýýþýþýþþýýþýþýýþýþþôýþýýþýýþýýþýýþýþþýýþýþýþüýþþýýüþýþýýþþýýöþýýþýýþýýþþýþüýþýþþüýþþýýþýþûýþýþýýúþýýþþýýþýþýþýþùýþýýþþý ýþþýýþýûþýþþýýþùýþýýþþýýþýüþýþýýþþýýþþýýþþýýþüýþþýýþýþþýýüþýþýýþýýþýýþþýýþüýþþýýþþýýþýþþýýþþýýþýþýþýþýþýþýýþýýþýøþýýþþýýþþýþýýþýþþýþýþþýþþýþýýþýþþýùþýýþýþýýúþýýþþýýþþýýþýþýþþýþþõýþþýþþýýþýþþûýþýýþþùýþþýýþýýþþýýþüýþýþþûýþþýþþýþûýþýýþþöýþþýýþýýþýýþýþýþþýþþþýþþýþýþýþýýþýýþþýýþþýýþþýýþþýþþýþþýþþýüþýýþþýþýùþýýþýþýýþþýþþþýþþýøþýýþþýýþþýþýþþýþ þþýþþýþïýþýþýýþýýþþýýþýýþþýþýþýõþýþýþþýþþýþþþýþþýöþýýþýýþýþýýþþýþþýþýþý þþýþþþýþþþýþþýþýýþýþþýþüýþþýýþþýýüþýýþþüýþýþþýþýýþýýþþýýþüýþýþþýþþýýþþýýüþýýþ þþýþ þüýþþýýþþýýþþýýþýþýþþýýþþýþþýþýúþýýþþýýþþýþþúýþýýþýýþþýþþ÷ýþýýþþýþýýþýþýýþýýþþýýþýþýûþýýþýýúþýþþýþþþýþþþýþþýþþýýýþýþþýþþýýþýýþýýþýþýþüýþýþþþýþþüýþýþþýýþýýþþýýþýþýþýþþýþþüýþýþþþýþþþýþþþýþþýþýùþýþýýþýýþýþýýþýþþüýþýþþþýþþýþüýþþýýûþýýþýýþþýýþýþþýý÷þýþýþþýýþþýþþýýþüýþþýýþþýýþùýþýýþýþþþýþþüýþýþþýþýþüýþþýýþýþþýþþýþþýþ þýþþýýþýþýþùýþýþýþýýþýþþýýþýþøýþþýþþýþþûýþþýþþþýþþýþýýþýþþýþþýýþýöþýýþýýþþýþþüýþýþþýþýþþýþþýþýþýþýþþýýþüýþýþþþýþ þýþýþýþþýýþøýþþýýþýþþûýþþýþþûýþþýþþýþýþýþþýýþýþýþýøþýýþýþýþþýþýþýþýþýþýüþýýþþþýþþüýþþýýþýþþýýüþýþýýýþýþþýþýüþýþýýþýýþýþþýþöýþýþþýþýýþþýþþýýþþýýþýþýþûýþýþýýþúýþýýþýýþýúþýýþþýý÷þýýþþýýþýýþþýþþûýþþýþþúýþýþýþþýþýõþýýþýþýýþþýýþýþþýþþûýþþýþþýýþýýþý÷þýþýýþýýþþýþýþþýþþýýþýýþþýýþþýþþýþýþýþýýþýý þýþýþþýýúþýýþýþþýþüýþýþþýþýûþýþýþþýþþýýþþýýþýþýýþýþþýþþý ýþûýþþýþþýþþýýõþýþýþþýþþýþþþýþþþýþþúýþþýþýýþýþýþýñþýýþýþýýþýþýýþýýþþýþþøýþþýþþýþþýýþýýþýþþýýùþýýþýþýýþýþþýýþþýþþüýþýþ þ ýþýýþýýþþýýþýþýùþýýþýýþþúýþýþýþþþýþþýþþýýþþýýþýþüýþýþþúýþýþþýýþþýþþý þûýþþýþþýþúýþýýþýýþþýýôþýþýþþýýþýþýýþþýþþûýþþýþþüýþþýýþþýýüþýþýýþþýýþýûþýýþý ýþþýþþþýþþýýþýþþýüþýýþþýþýýþýýúþýüýýþþþýþþýþýþöýþþýþýýþþýýúþýýþþýýþþýýþþýþ þýþþýýþþý ýýþýþþúýþýýþýýþþýþþüýþýþþôýþýþýþýþþýþý ýûþýýþýýþþýýþýüþýýþ þþýþþùýþýýþýþþýþýþúýþýýþýýþþýýþþýýþý þþýþþýþýýþýýþüýþýþþýþþýþþüýþýþþþýþþùýþþýþýþþýüþýýþþýþùýþþýýþýýüþýþýýþþýþ þýþýþüýþýþþúýþýýþýýþþýýþýþøýþþýþþýþþüýþýþþýþùýþýþýþýýûþýþþýýüþýþýýþþýý þûýþþýþþøýþþýýþþýýþýøþýýþýýþýýüþýþýý÷þýýþýýþþýýþûýþþýþþþýþþýþýöþýþýýþþýýþþýþýüþýýþþýþý?þþóôôõóñçããåÎp…Ë$ðqMH&1h©ÂÄÅi®ÇÇÈéÉÊËËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕúóõôôÜõôëççÕÍÖÎæÀ*%32xŒ@;ÀÂÃÄ £¾ÆÇÇÈýÉÊËËÊÌÍÎÎÏÐÐÑÒÒÓÓÔúéôðòôôíliÄG!ˆVÔõÁ uRu›:­ÁÂÂÃÃÄÅÆÆÇÈÙÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓúFàzËõôç&?ª‰žEJÝõ‹ Á' *ƒµAy¸ÀÂÂÃÄÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓú"±îóå²ÙeÌãÝÎéà'ÉW:”0q¼ÀÁÂÂÃÄÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÒÒú)2²¯Ú­ôõðæäãäæÀýC"ò=$*I‚¹¿ÀÀÂÂÃÄÄúÅÆÆÇÇÉÉáÊËËÌÌÍÎÎÏÏÐÑÒúóóâqŠ‡hôõôðãääçoâ&"™YNn¹¿ÀÀÂÂÃÄÃÄÅÆÆÇÇÉÉëÊËËÌÌÍÎÎÏÏÐÑúóôïÍsoÏôôùíãäã•Â kB(=“˜tE<¸¿ÀÀÂÂÃÃÄÄÅÆÆÇoÈÉÉÊÊËÌÌÍÎÎÏÏÐúóôóÚ¼ôõôôïãlL é * {+#w†µ¾w»ÀÀÂÃÆÄÄúÅÆÆÇÇÉÉÊòËÌÌÍÎÎÏÏúôôóóôôøò, ë @•e26ZD/µ¿ÀÁÃÃÄúÅÆÆÇÇÉÉÊÃËÌÌÍÎÎÏúóÏ–‡|u•ôç& Pu8m=Ov¤³½¾¾¿ÀÀÁÂÂÃÄÄÅÆÆÇÇÉÉÊìËÌÌÍÎÎúk:HO ìQm".)j²¼¼½½¾ñ¿ÀÁÁÂÂÃÃÄÅÅÆÇÇÉÉÊùËÌÌÍÎúþ Ø  xK#,¸»¼»¼½½¾¾¿¿ÁÁÂÂÃÃÄÅÅÆÇÇÉÉÊúËÌÌÍúéM-€m/…Ž¶ºº»»ý¼½¾¾ÀÁöÂÃÄÄÅÅÆÇÇÉÉÊûËÌÌúã k#IMq=£¸¹ºº·º¼¼½¾¾ò¿ÀÁÁÂÃÃÄÅÅÆÇÇÉÉÊüËÌúý ç ',K!g/œµ¸¹¹”¹»»¼½¾¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉÊýËúýþí n-tY°¸µ_¶º»»½½¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉÊþúû ù õ+l;m"!’µ¸¸ú¹ºº»¼½½¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉëÊúW.+P&G0 Ø*38)ƒ4¬¶¶··¸¹ºº»¼¼½–¯¿¿ÀÀÁÁÂÃÄÄÅÅÆÇÇÉÉðú-)+8):€3%+þ ï/;H®µµ·¸¸¹µ»»×œZ}¾¿¿ÀÀÁÁÂÃÄÄÅÅÆÇÇÉÉú,!*U"e*ô8‡a"fž^2¾µµó·¸ªJe»»­—¢½¾¿¿ñÀÁÂÂÃÄÄÅÅÆÇÇÉúåjŒ&7£ o&[w=|`9%°µµþ¶¸¸º»ü¼½½¿¿îÀÁÂÂÃÄÄÅÅÆÇÇú2,P9å€$ h"Ej:Dl"{hˆš$°µµü·¸¹ºº»ü¼½½¿¿ÀÒÁÂÂÃÄÄÅÅÆÇúMR_B…<02"€RDSE Š ²™±´µµô·¸¹¹ºº»»¼½½¿¿ÀÒÁÂÂÃÄÄÅÅÆú]’7c™Ž7‘ d-¯7ao\š¬c°³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÒÁÂÂÃÃÄÅÅú9WG!ˆŒ9}et7¿Ã~MQFk‘šœš±²³³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÙÁÂÂÃÃÄÅú8C51H6Š]3{-Ki*Œ<½Ë@>5š-$›§±±û²³³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÒÁÂÂÃÃÄúM2y‡Gr'€y˜$N.•Ë»€9(u‡U%=£°°±±²³³´µµô·¸¬²ºº»»¼½½¿¿ÀÛÁÂÂÃÃú$ES™ŠD)–£‹) %"`ÅȦ3 5!£°°±ü²³´µµÃ§iM¹¹º»»¼½½¾¿¿ÀÀÁÂÂÃú$E•Ÿs%gš¡¢”–/€PoW›Ç¯£K“šyWŽ£®¯°°±±²³´µµÃ·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂúHžn;#]™¡¡&©Ú¹ ƒVOVE¢3}˜šš›¡¬®¯°°±±²³´µµé¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂú*œœÚF‚ —a¢®ÜÖȳŽ“ÃÃÆW^˜šš«®®¯¯°±²³³´´µµ×¶·¸¸¹¹º»»¼½½¾¿¿ÀÀÁ­—šœœ†3!–›‡ ¡£°ÇÎÌÄÁÉÎÏÏðªxA™ššª­®®¯°°±²³³Õ´µµ¶¶··¸¹¹º»»¼½½¾¿¿ÀÀú˜™™†NI‘ŸŸ ]¡¤¶Î˾ÃÏÏïÊ“š#šœ©¬­®®¯°±±²³³´Ýµ¶¶··¸¹¹º»»¼½½¾¿¿Àú——‚ihžžŸƒ¡ªÍÎÎÂÇÅÎÎÏÏÌÖ§ ’¨««¬®®¯°±±²²³³´´µ¶¶··¸¹¹º»»¼½½¾¿¿ú—˜™š›œœžžŸŸ¡µ×ÎÎýÍÎÏÏùƼ¨•««ú¬®¯°°±±ú²³³´´¶¶ñ·¸¸¹¹º»»¼½½¾¿ú˜˜â™š›œ³¡žŸ¡©·ÎÍÎÎÍÍÎÏÏÎɾ»¼¡@‰««ú¬®¯¯°±±þ²³³þ´¶¶â·¸¸¹¹º»»¼½½¾ú˜—˜˜™šŸœžŸ‡}ÍÎÎÍÏëξ½½¾§[‰««¬­®¯¯°°±±²³³þ´¶¶ñ·¸¸¹¹º»»¼½½ú&“˜˜›ö•ŒsiÍÎÎïÏÎÌÀ½¼´Ç½TŽª«¬¬®¯¯û°±±²³³þ´¶¶å·¸¸¹¹º»»¼½ú‘–—’“ˆFœ™ouÎÎëÍÎÎÍÏËü´˜•Î®H–««¬­®¯¯÷°±±²³³´´¶¶æ·¸¸¹¹º»»¼úZt•‘j''o–Œ ÎÎÍäÎÍÌ‹Îʽ½›Z¡Íµ7š««¬­®®¯¯°±±²³³þ´¶¶è·¸¸¹¹º»»ú­0”–ŽV1›—ÎÎÛÍÎÍÎÎÍÀ“1®·½Â®f¨ÍÂ*‰««¬­®®¯¯°±±²³³´´¶¶ç·¸¸¹¹º»ú©‡••‰lY!>oN°ÎÎÍÍîÎÍÈȨ:‘ ½Ï¼S²Å=z¤««­ô®¯°°±±²³³´´¶¶ê·¸¸¹¹ºúÍÁ—••–M.„y3´ÍÎÎê‡<ÊÎÍÍÎèon±ÌÏ´/´Ë˜aZ««­ô®¯¯°±±²³³´´¶¶ì·¸¸¹¹úÍÂ=”•ƒw–zÍÍÎÎþŸ¡&rÍÍÌŽ´›lšÍ¶<ªËº˜‘¢««¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹úÍ«l“”••{.»4ÍÍÎÎ×;“”œÁÍÍƽ¼•=c°¸ÅF‹Ìõ]¦««¬­®®¯¯°±±²³³´´¶¶·ä¸úÍl—²•F©îÚë1ÌÍÎΡœ”QÃɽ½áÀǸb1ŸÉhÍ‹„¤«¬¬­®®¯¯°±±²³³´´¶¶·ÑúÃ!OG»éî—-ÌÇÃiE‘‘Šˆ”o¤¯½½¿Å΀UŠ¶¹~¶¬R“ª«¬­­³®¯¯°±±²³³´´µ¶¶·ú'{^:m™Y-•Ì̵XKŠ™…4*€–qU­½¾ÉÎÎˈ{Ë°¬v@u¢ª««¬­­®¯¯°±±²²³´´¶¶èú„?Q‹¢yÁÍ̦~f‘o2(YRŽŽû”|ÃÍÍŸÎÅ·Iͧ“X&5{ªª«¬¬­­®¯¯°±±²²³´´¶¶ú#q~¤²¨›©¢Os~N85!1€˜ŽŒi_“ÄÍÍĮ̈ºzǦS6*e©ª««¬¬­®®¯¯°±±²²³´´¶úâ=„—]Go”•‡[P|^1'hYhŒŽ‘|Y™ÊÍÎÎó«Q¼Å´}C\©©ªª¬¬­á®¯¯°±±²²³´´úG^Š’’“”’ˆ=é J‹˜žŽNIÍÍÎ΢ƒ‚®§U S¨©©þª¬¬­ã®¯¯°±±²²³´ú'_\[\eˆ†l* è R¨¨ü©ªª¬¬­Û®¯¯°±±²²³ú  -i†t') .ê%£™zŒƒeL`r^w£§¨¨©©ª¬¬­û®¯¯°±±Ê²ú$%1  )X†m6Nf&)\`H7CC-^ ‰]T]}|*z§§¨¨©ªª¬¬­ì®¯¯°±±²ú|‹·r7  CˆˆŠâŒ’——ƒwzT(sŠlzZs"<¦¦§§û¨©©ª¬¬­ò®¯¯°±±ú‚ƒ„…††‡‡ˆõ‹““”••––—˜˜ã–Š}odn6)U|‚ƒ‰“˜œŸ¢¥¦§¨šl©ª¬¬­ò®¯¯°±ú‰Š‹‹ŒŽú‘’““”••æ–—˜—˜˜™š›£š]=-3=(ú©ªª¬¬­Ã®¯¯°úˆ‰Š‹‹ŒŒŽ‘‘’““”••––——˜™šš¡¤“€eS‘¸‘$/6¡Å䥥¦§§¨¨©ªª¬¬­Ã®¯¯úˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš›œœžžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª¬¬­ò®¯úˆˆ‰ŠŠ‹‹ŒŽŽÕ‘’’“””••–——˜˜™šš›œœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª¬¬­ó®úˆˆ‰‰Š‹‹ŒŒŽŽ‘î’““”••––——˜˜šš››œøžŸ  ¡¡¢££¯¤¥¥¦§§¨¨©ªª«¬¬­­ú‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®þóôôõóñçããåÎp…Ë$ðqMH&1h©ÂÄÅi®ÇÇÈéÉÊËËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕúóõôôÜõôëççÕÍÖÎæÀ*%32xŒ@;ÀÂÃÄ £¾ÆÇÇÈýÉÊËËÊÌÍÎÎÏÐÐÑÒÒÓÓÔúéôðòôôíliÄG!ˆVÔõÁ uRu›:­ÁÂÂÃÃÄÅÆÆÇÈÙÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓúFàzËõôç&?ª‰žEJÝõ‹ Á' *ƒµAy¸ÀÂÂÃÄÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓú"±îóå²ÙeÌãÝÎéà'ÉW:”0q¼ÀÁÂÂÃÄÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÒÒú)2²¯Ú­ôõðæäãäæÀýC"ò=$*I‚¹¿ÀÀÂÂÃÄÄúÅÆÆÇÇÉÉáÊËËÌÌÍÎÎÏÏÐÑÒúóóâqŠ‡hôõôðãääçoâ&"™YNn¹¿ÀÀÂÂÃÄÃÄÅÆÆÇÇÉÉëÊËËÌÌÍÎÎÏÏÐÑúóôïÍsoÏôôùíãäã•Â kB(=“˜tE<¸¿ÀÀÂÂÃÃÄÄÅÆÆÇoÈÉÉÊÊËÌÌÍÎÎÏÏÐúóôóÚ¼ôõôôïãlL é * {+#w†µ¾w»ÀÀÂÃÆÄÄúÅÆÆÇÇÉÉÊòËÌÌÍÎÎÏÏúôôóóôôøò, ë @•e26ZD/µ¿ÀÁÃÃÄúÅÆÆÇÇÉÉÊÃËÌÌÍÎÎÏúóÏ–‡|u•ôç& Pu8m=Ov¤³½¾¾¿ÀÀÁÂÂÃÄÄÅÆÆÇÇÉÉÊìËÌÌÍÎÎúk:HO ìQm".)j²¼¼½½¾ñ¿ÀÁÁÂÂÃÃÄÅÅÆÇÇÉÉÊùËÌÌÍÎúþ Ø  xK#,¸»¼»¼½½¾¾¿¿ÁÁÂÂÃÃÄÅÅÆÇÇÉÉÊúËÌÌÍúéM-€m/…Ž¶ºº»»ý¼½¾¾ÀÁöÂÃÄÄÅÅÆÇÇÉÉÊûËÌÌúã k#IMq=£¸¹ºº·º¼¼½¾¾ò¿ÀÁÁÂÃÃÄÅÅÆÇÇÉÉÊüËÌúý ç ',K!g/œµ¸¹¹”¹»»¼½¾¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉÊýËúýþí n-tY°¸µ_¶º»»½½¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉÊþúû ù õ+l;m"!’µ¸¸ú¹ºº»¼½½¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉëÊúW.+P&G0 Ø*38)ƒ4¬¶¶··¸¹ºº»¼¼½–¯¿¿ÀÀÁÁÂÃÄÄÅÅÆÇÇÉÉðú-)+8):€3%+þ ï/;H®µµ·¸¸¹µ»»×œZ}¾¿¿ÀÀÁÁÂÃÄÄÅÅÆÇÇÉÉú,!*U"e*ô8‡a"fž^2¾µµó·¸ªJe»»­—¢½¾¿¿ñÀÁÂÂÃÄÄÅÅÆÇÇÉúåjŒ&7£ o&[w=|`9%°µµþ¶¸¸º»ü¼½½¿¿îÀÁÂÂÃÄÄÅÅÆÇÇú2,P9å€$ h"Ej:Dl"{hˆš$°µµü·¸¹ºº»ü¼½½¿¿ÀÒÁÂÂÃÄÄÅÅÆÇúMR_B…<02"€RDSE Š ²™±´µµô·¸¹¹ºº»»¼½½¿¿ÀÒÁÂÂÃÄÄÅÅÆú]’7c™Ž7‘ d-¯7ao\š¬c°³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÒÁÂÂÃÃÄÅÅú9WG!ˆŒ9}et7¿Ã~MQFk‘šœš±²³³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÙÁÂÂÃÃÄÅú8C51H6Š]3{-Ki*Œ<½Ë@>5š-$›§±±û²³³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÒÁÂÂÃÃÄúM2y‡Gr'€y˜$N.•Ë»€9(u‡U%=£°°±±²³³´µµô·¸¬²ºº»»¼½½¿¿ÀÛÁÂÂÃÃú$ES™ŠD)–£‹) %"`ÅȦ3 5!£°°±ü²³´µµÃ§iM¹¹º»»¼½½¾¿¿ÀÀÁÂÂÃú$E•Ÿs%gš¡¢”–/€PoW›Ç¯£K“šyWŽ£®¯°°±±²³´µµÃ·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂúHžn;#]™¡¡&©Ú¹ ƒVOVE¢3}˜šš›¡¬®¯°°±±²³´µµé¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂú*œœÚF‚ —a¢®ÜÖȳŽ“ÃÃÆW^˜šš«®®¯¯°±²³³´´µµ×¶·¸¸¹¹º»»¼½½¾¿¿ÀÀÁ­—šœœ†3!–›‡ ¡£°ÇÎÌÄÁÉÎÏÏðªxA™ššª­®®¯°°±²³³Õ´µµ¶¶··¸¹¹º»»¼½½¾¿¿ÀÀú˜™™†NI‘ŸŸ ]¡¤¶Î˾ÃÏÏïÊ“š#šœ©¬­®®¯°±±²³³´Ýµ¶¶··¸¹¹º»»¼½½¾¿¿Àú——‚ihžžŸƒ¡ªÍÎÎÂÇÅÎÎÏÏÌÖ§ ’¨««¬®®¯°±±²²³³´´µ¶¶··¸¹¹º»»¼½½¾¿¿ú—˜™š›œœžžŸŸ¡µ×ÎÎýÍÎÏÏùƼ¨•««ú¬®¯°°±±ú²³³´´¶¶ñ·¸¸¹¹º»»¼½½¾¿ú˜˜â™š›œ³¡žŸ¡©·ÎÍÎÎÍÍÎÏÏÎɾ»¼¡@‰««ú¬®¯¯°±±þ²³³þ´¶¶â·¸¸¹¹º»»¼½½¾ú˜—˜˜™šŸœžŸ‡}ÍÎÎÍÏëξ½½¾§[‰««¬­®¯¯°°±±²³³þ´¶¶ñ·¸¸¹¹º»»¼½½ú&“˜˜›ö•ŒsiÍÎÎïÏÎÌÀ½¼´Ç½TŽª«¬¬®¯¯û°±±²³³þ´¶¶å·¸¸¹¹º»»¼½ú‘–—’“ˆFœ™ouÎÎëÍÎÎÍÏËü´˜•Î®H–««¬­®¯¯÷°±±²³³´´¶¶æ·¸¸¹¹º»»¼úZt•‘j''o–Œ ÎÎÍäÎÍÌ‹Îʽ½›Z¡Íµ7š««¬­®®¯¯°±±²³³þ´¶¶è·¸¸¹¹º»»ú­0”–ŽV1›—ÎÎÛÍÎÍÎÎÍÀ“1®·½Â®f¨ÍÂ*‰««¬­®®¯¯°±±²³³´´¶¶ç·¸¸¹¹º»ú©‡••‰lY!>oN°ÎÎÍÍîÎÍÈȨ:‘ ½Ï¼S²Å=z¤««­ô®¯°°±±²³³´´¶¶ê·¸¸¹¹ºúÍÁ—••–M.„y3´ÍÎÎê‡<ÊÎÍÍÎèon±ÌÏ´/´Ë˜aZ««­ô®¯¯°±±²³³´´¶¶ì·¸¸¹¹úÍÂ=”•ƒw–zÍÍÎÎþŸ¡&rÍÍÌŽ´›lšÍ¶<ªËº˜‘¢««¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹úÍ«l“”••{.»4ÍÍÎÎ×;“”œÁÍÍƽ¼•=c°¸ÅF‹Ìõ]¦««¬­®®¯¯°±±²³³´´¶¶·ä¸úÍl—²•F©îÚë1ÌÍÎΡœ”QÃɽ½áÀǸb1ŸÉhÍ‹„¤«¬¬­®®¯¯°±±²³³´´¶¶·ÑúÃ!OG»éî—-ÌÇÃiE‘‘Šˆ”o¤¯½½¿Å΀UŠ¶¹~¶¬R“ª«¬­­³®¯¯°±±²³³´´µ¶¶·ú'{^:m™Y-•Ì̵XKŠ™…4*€–qU­½¾ÉÎÎˈ{Ë°¬v@u¢ª««¬­­®¯¯°±±²²³´´¶¶èú„?Q‹¢yÁÍ̦~f‘o2(YRŽŽû”|ÃÍÍŸÎÅ·Iͧ“X&5{ªª«¬¬­­®¯¯°±±²²³´´¶¶ú#q~¤²¨›©¢Os~N85!1€˜ŽŒi_“ÄÍÍĮ̈ºzǦS6*e©ª««¬¬­®®¯¯°±±²²³´´¶úâ=„—]Go”•‡[P|^1'hYhŒŽ‘|Y™ÊÍÎÎó«Q¼Å´}C\©©ªª¬¬­á®¯¯°±±²²³´´úG^Š’’“”’ˆ=é J‹˜žŽNIÍÍÎ΢ƒ‚®§U S¨©©þª¬¬­ã®¯¯°±±²²³´ú'_\[\eˆ†l* è R¨¨ü©ªª¬¬­Û®¯¯°±±²²³ú  -i†t') .ê%£™zŒƒeL`r^w£§¨¨©©ª¬¬­û®¯¯°±±Ê²ú$%1  )X†m6Nf&)\`H7CC-^ ‰]T]}|*z§§¨¨©ªª¬¬­ì®¯¯°±±²ú|‹·r7  CˆˆŠâŒ’——ƒwzT(sŠlzZs"<¦¦§§û¨©©ª¬¬­ò®¯¯°±±ú‚ƒ„…††‡‡ˆõ‹““”••––—˜˜ã–Š}odn6)U|‚ƒ‰“˜œŸ¢¥¦§¨šl©ª¬¬­ò®¯¯°±ú‰Š‹‹ŒŽú‘’““”••æ–—˜—˜˜™š›£š]=-3=(ú©ªª¬¬­Ã®¯¯°úˆ‰Š‹‹ŒŒŽ‘‘’““”••––——˜™šš¡¤“€eS‘¸‘$/6¡Å䥥¦§§¨¨©ªª¬¬­Ã®¯¯úˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš›œœžžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª¬¬­ò®¯úˆˆ‰ŠŠ‹‹ŒŽŽÕ‘’’“””••–——˜˜™šš›œœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª¬¬­ó®úˆˆ‰‰Š‹‹ŒŒŽŽ‘î’““”••––——˜˜šš››œøžŸ  ¡¡¢££¯¤¥¥¦§§¨¨©ªª«¬¬­­ú‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®þóôôõóñçããåÎp…Ë$ðqMH&1h©ÂÄÅi®ÇÇÈéÉÊËËÌÌÍÍÎÏÐÐÑÒÒÓÓÔÕúóõôôÜõôëççÕÍÖÎæÀ*%32xŒ@;ÀÂÃÄ £¾ÆÇÇÈýÉÊËËÊÌÍÎÎÏÐÐÑÒÒÓÓÔúéôðòôôíliÄG!ˆVÔõÁ uRu›:­ÁÂÂÃÃÄÅÆÆÇÈÙÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓúFàzËõôç&?ª‰žEJÝõ‹ Á' *ƒµAy¸ÀÂÂÃÄÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓú"±îóå²ÙeÌãÝÎéà'ÉW:”0q¼ÀÁÂÂÃÄÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÑÒÒú)2²¯Ú­ôõðæäãäæÀýC"ò=$*I‚¹¿ÀÀÂÂÃÄÄúÅÆÆÇÇÉÉáÊËËÌÌÍÎÎÏÏÐÑÒúóóâqŠ‡hôõôðãääçoâ&"™YNn¹¿ÀÀÂÂÃÄÃÄÅÆÆÇÇÉÉëÊËËÌÌÍÎÎÏÏÐÑúóôïÍsoÏôôùíãäã•Â kB(=“˜tE<¸¿ÀÀÂÂÃÃÄÄÅÆÆÇoÈÉÉÊÊËÌÌÍÎÎÏÏÐúóôóÚ¼ôõôôïãlL é * {+#w†µ¾w»ÀÀÂÃÆÄÄúÅÆÆÇÇÉÉÊòËÌÌÍÎÎÏÏúôôóóôôøò, ë @•e26ZD/µ¿ÀÁÃÃÄúÅÆÆÇÇÉÉÊÃËÌÌÍÎÎÏúóÏ–‡|u•ôç& Pu8m=Ov¤³½¾¾¿ÀÀÁÂÂÃÄÄÅÆÆÇÇÉÉÊìËÌÌÍÎÎúk:HO ìQm".)j²¼¼½½¾ñ¿ÀÁÁÂÂÃÃÄÅÅÆÇÇÉÉÊùËÌÌÍÎúþ Ø  xK#,¸»¼»¼½½¾¾¿¿ÁÁÂÂÃÃÄÅÅÆÇÇÉÉÊúËÌÌÍúéM-€m/…Ž¶ºº»»ý¼½¾¾ÀÁöÂÃÄÄÅÅÆÇÇÉÉÊûËÌÌúã k#IMq=£¸¹ºº·º¼¼½¾¾ò¿ÀÁÁÂÃÃÄÅÅÆÇÇÉÉÊüËÌúý ç ',K!g/œµ¸¹¹”¹»»¼½¾¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉÊýËúýþí n-tY°¸µ_¶º»»½½¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉÊþúû ù õ+l;m"!’µ¸¸ú¹ºº»¼½½¾ñ¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÉÉëÊúW.+P&G0 Ø*38)ƒ4¬¶¶··¸¹ºº»¼¼½–¯¿¿ÀÀÁÁÂÃÄÄÅÅÆÇÇÉÉðú-)+8):€3%+þ ï/;H®µµ·¸¸¹µ»»×œZ}¾¿¿ÀÀÁÁÂÃÄÄÅÅÆÇÇÉÉú,!*U"e*ô8‡a"fž^2¾µµó·¸ªJe»»­—¢½¾¿¿ñÀÁÂÂÃÄÄÅÅÆÇÇÉúåjŒ&7£ o&[w=|`9%°µµþ¶¸¸º»ü¼½½¿¿îÀÁÂÂÃÄÄÅÅÆÇÇú2,P9å€$ h"Ej:Dl"{hˆš$°µµü·¸¹ºº»ü¼½½¿¿ÀÒÁÂÂÃÄÄÅÅÆÇúMR_B…<02"€RDSE Š ²™±´µµô·¸¹¹ºº»»¼½½¿¿ÀÒÁÂÂÃÄÄÅÅÆú]’7c™Ž7‘ d-¯7ao\š¬c°³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÒÁÂÂÃÃÄÅÅú9WG!ˆŒ9}et7¿Ã~MQFk‘šœš±²³³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÙÁÂÂÃÃÄÅú8C51H6Š]3{-Ki*Œ<½Ë@>5š-$›§±±û²³³´µµó¶·¸¸¹ºº»»¼½½¿¿ÀÒÁÂÂÃÃÄúM2y‡Gr'€y˜$N.•Ë»€9(u‡U%=£°°±±²³³´µµô·¸¬²ºº»»¼½½¿¿ÀÛÁÂÂÃÃú$ES™ŠD)–£‹) %"`ÅȦ3 5!£°°±ü²³´µµÃ§iM¹¹º»»¼½½¾¿¿ÀÀÁÂÂÃú$E•Ÿs%gš¡¢”–/€PoW›Ç¯£K“šyWŽ£®¯°°±±²³´µµÃ·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂÂúHžn;#]™¡¡&©Ú¹ ƒVOVE¢3}˜šš›¡¬®¯°°±±²³´µµé¶·¸¸¹ºº»»¼½½¾¿¿ÀÀÁÂú*œœÚF‚ —a¢®ÜÖȳŽ“ÃÃÆW^˜šš«®®¯¯°±²³³´´µµ×¶·¸¸¹¹º»»¼½½¾¿¿ÀÀÁ­—šœœ†3!–›‡ ¡£°ÇÎÌÄÁÉÎÏÏðªxA™ššª­®®¯°°±²³³Õ´µµ¶¶··¸¹¹º»»¼½½¾¿¿ÀÀú˜™™†NI‘ŸŸ ]¡¤¶Î˾ÃÏÏïÊ“š#šœ©¬­®®¯°±±²³³´Ýµ¶¶··¸¹¹º»»¼½½¾¿¿Àú——‚ihžžŸƒ¡ªÍÎÎÂÇÅÎÎÏÏÌÖ§ ’¨««¬®®¯°±±²²³³´´µ¶¶··¸¹¹º»»¼½½¾¿¿ú—˜™š›œœžžŸŸ¡µ×ÎÎýÍÎÏÏùƼ¨•««ú¬®¯°°±±ú²³³´´¶¶ñ·¸¸¹¹º»»¼½½¾¿ú˜˜â™š›œ³¡žŸ¡©·ÎÍÎÎÍÍÎÏÏÎɾ»¼¡@‰««ú¬®¯¯°±±þ²³³þ´¶¶â·¸¸¹¹º»»¼½½¾ú˜—˜˜™šŸœžŸ‡}ÍÎÎÍÏëξ½½¾§[‰««¬­®¯¯°°±±²³³þ´¶¶ñ·¸¸¹¹º»»¼½½ú&“˜˜›ö•ŒsiÍÎÎïÏÎÌÀ½¼´Ç½TŽª«¬¬®¯¯û°±±²³³þ´¶¶å·¸¸¹¹º»»¼½ú‘–—’“ˆFœ™ouÎÎëÍÎÎÍÏËü´˜•Î®H–««¬­®¯¯÷°±±²³³´´¶¶æ·¸¸¹¹º»»¼úZt•‘j''o–Œ ÎÎÍäÎÍÌ‹Îʽ½›Z¡Íµ7š««¬­®®¯¯°±±²³³þ´¶¶è·¸¸¹¹º»»ú­0”–ŽV1›—ÎÎÛÍÎÍÎÎÍÀ“1®·½Â®f¨ÍÂ*‰««¬­®®¯¯°±±²³³´´¶¶ç·¸¸¹¹º»ú©‡••‰lY!>oN°ÎÎÍÍîÎÍÈȨ:‘ ½Ï¼S²Å=z¤««­ô®¯°°±±²³³´´¶¶ê·¸¸¹¹ºúÍÁ—••–M.„y3´ÍÎÎê‡<ÊÎÍÍÎèon±ÌÏ´/´Ë˜aZ««­ô®¯¯°±±²³³´´¶¶ì·¸¸¹¹úÍÂ=”•ƒw–zÍÍÎÎþŸ¡&rÍÍÌŽ´›lšÍ¶<ªËº˜‘¢««¬­®®¯¯°±±²³³´´µ¶¶·¸¸¹úÍ«l“”••{.»4ÍÍÎÎ×;“”œÁÍÍƽ¼•=c°¸ÅF‹Ìõ]¦««¬­®®¯¯°±±²³³´´¶¶·ä¸úÍl—²•F©îÚë1ÌÍÎΡœ”QÃɽ½áÀǸb1ŸÉhÍ‹„¤«¬¬­®®¯¯°±±²³³´´¶¶·ÑúÃ!OG»éî—-ÌÇÃiE‘‘Šˆ”o¤¯½½¿Å΀UŠ¶¹~¶¬R“ª«¬­­³®¯¯°±±²³³´´µ¶¶·ú'{^:m™Y-•Ì̵XKŠ™…4*€–qU­½¾ÉÎÎˈ{Ë°¬v@u¢ª««¬­­®¯¯°±±²²³´´¶¶èú„?Q‹¢yÁÍ̦~f‘o2(YRŽŽû”|ÃÍÍŸÎÅ·Iͧ“X&5{ªª«¬¬­­®¯¯°±±²²³´´¶¶ú#q~¤²¨›©¢Os~N85!1€˜ŽŒi_“ÄÍÍĮ̈ºzǦS6*e©ª««¬¬­®®¯¯°±±²²³´´¶úâ=„—]Go”•‡[P|^1'hYhŒŽ‘|Y™ÊÍÎÎó«Q¼Å´}C\©©ªª¬¬­á®¯¯°±±²²³´´úG^Š’’“”’ˆ=é J‹˜žŽNIÍÍÎ΢ƒ‚®§U S¨©©þª¬¬­ã®¯¯°±±²²³´ú'_\[\eˆ†l* è R¨¨ü©ªª¬¬­Û®¯¯°±±²²³ú  -i†t') .ê%£™zŒƒeL`r^w£§¨¨©©ª¬¬­û®¯¯°±±Ê²ú$%1  )X†m6Nf&)\`H7CC-^ ‰]T]}|*z§§¨¨©ªª¬¬­ì®¯¯°±±²ú|‹·r7  CˆˆŠâŒ’——ƒwzT(sŠlzZs"<¦¦§§û¨©©ª¬¬­ò®¯¯°±±ú‚ƒ„…††‡‡ˆõ‹““”••––—˜˜ã–Š}odn6)U|‚ƒ‰“˜œŸ¢¥¦§¨šl©ª¬¬­ò®¯¯°±ú‰Š‹‹ŒŽú‘’““”••æ–—˜—˜˜™š›£š]=-3=(ú©ªª¬¬­Ã®¯¯°úˆ‰Š‹‹ŒŒŽ‘‘’““”••––——˜™šš¡¤“€eS‘¸‘$/6¡Å䥥¦§§¨¨©ªª¬¬­Ã®¯¯úˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš›œœžžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª¬¬­ò®¯úˆˆ‰ŠŠ‹‹ŒŽŽÕ‘’’“””••–——˜˜™šš›œœžŸŸ  ¡¢¢£¤¤¥¥¦§§¨¨©ªª¬¬­ó®úˆˆ‰‰Š‹‹ŒŒŽŽ‘î’““”••––——˜˜šš››œøžŸ  ¡¡¢££¯¤¥¥¦§§¨¨©ªª«¬¬­­ú‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®ýþýþýþýþýýþýýüþýþýýþý þüúýþýýþþýýýþýþþýþýýþýþþýþþýýþý þþúýýþýþùýþýþýþýý÷þýþþýýþýþþýýþýýþý þùúýþýýþýýøþýýþþýýþþýöþýþþýþþýýþþýýþýýþý þýúþýýþþýýþþýýþýüþýýþþýüþýþýýþýþý þùúýýþýüýýúþýýþýþþýþüýþýþþýþýýþýýþý þðúýýþýýþýýþýþýþþýýþþýýúþýþþýþþöýþýýþýýþþýýþý þøúýþþýýþýýðþýýþýþýþýþýýþýþýýþñýþþýþýýþýþþýýþýýþý þüúýþýýüþýþýýýþýþþúýþýýþýýþýþþýýþýþýþý þüúþþý ýþýþþýýüþýþýýþþýýûþýþýþþý þþúýýþþýýþþýþþýóþýýþýþþýýþýþýýüþýýþþý þþúýýþþýýùþýþýþýþþüýþþýýþþýýþý÷þýþþýýþþýýþý þõúýýþýýþýýþýýþýþýþþýýþýþýþþýýþý þýúýþþýþþýýþüýþýþ þúýþþýþýýþý þþúýýþþýý÷þýýþþýýþýýýþýþþúýþýýþýýüþýþýýþý þýúþýýþþýýüþýýþþúýþþýýþþúýþþýþýýþþýýþþýýþý þþúýý÷þýþþýþýýþþýüþýýþþýþþý ýþý þüúýþýýûþýýþýýùþýýþþýþþ÷ýþýýþýþþýýþþýýþý þüúýþýýþ ý þþýþþýþþýýþýýþýýþý þþúýýþýþûýþþýþþþýþþüýþþýýúþýýþþýýýþýþþý þùúýþýþþýýþûýþþýþþþýþþýúþýþýþýýþþýþþþýþþþýþþþúýýþýþøýþýþþýýþþüýþþý ýþþýþþôýþþúþþýþýýþýýþþýýþýûþýþýþ þýþþýýþþýþþþýþþþúþþýþýøþýýþýþþýýþýþþýþþþýþþýþýùþýýþþýþ þüúýþýýþýþýþþýýþýüþýýþþýþýþûýþþýþþþýþþüúþþýýüþýýþþýþþýýûþýýþýýýþýþþýþþýýþþýþþþýþþþúþþýúþýýþýþþýþüýþþýýüþýþýý÷þýýþþýþýþþýþýúýþþýýþýþþýýþýþþýûþýýþý ýþþýþþüúýýþþýüþýýþþýþþýþþýýþýýþþýþ þûúþþýþþûýþýþýýþýþýôþýýþýýþþýýþýýþýþþýþ þúúýýþþýýþþýþþþýþþýþý÷þýýþþýýþýýýþýþþþýþþúýúýýþýýúþýþýýþþýþþýýþ÷ýþþýþýýþýýþýþþýýûþýþýþþþýþþñ­ýýþýýþýþýþþýþýýþ÷ýþýýþþýþýýþþýýþýüþýýþþýúþýþþýþþýúýþþýýþýþþýþýþýýþýýþýþýþþýþþüúþýþþýþýþþýþþýþþýýþýþþýýþþýþþþýþþüúýýþþýþýüþýþýýþýþýüþýþýýüþýýþþýþûýþþýþþ÷úþþýþýýþý ýýþýþþýþþý ýþþýýþýþþýþþùúþýýþýþþýþþýýþýþûýþýþýýþý÷þýþþýýþýþþþýþþþúýýþûýþýýþþýþýüþýþýýþþýýþþýþþüýþýþþûýþúþýýüþýýþþýþýþþýýûþýýþýýþþýýûþýýþýýüþýýþþ÷ýþýþýþþúýýþýþýþ ýþþýýþþýýüþýþýýúþýýþýþ þþúýýþþýýþýþ÷ýþýþþýþþýý÷üýþýþþýýþþýþþýýþúúþýýþýýþüýýþþýýþýõþýýþýýþýýþýýþýþüúþþýýþýýþýýüþýýþþþýþþýþüýþþýýþýûþýþýþþûýþþýþþýúþýýñþýýþþýýþýýþýþþý ýûþýýþýýþþýýþýýþýþþøýþþýþþúþþþýþþýüþýþýýþýþþýýþþýýüþýþýýþýþþýþþþýþþýúýþþýöþýýþýþþýýþþýþýþþýýþþýþþþýþþýþøúþýþýþþýýþþýýüþýýþþýþþýýþþýýþýþþýþþþýþþýúþýýþþýýþýþþýýþþýýþúýþþýþýýüþýýþ þûúýþþýýþýþüýþþýýþþýýþýþñýþþýýþýýþþýýþýþþüúþþýýþïýþþýýþýþþýþýýþýýþþýþþýýýþýþþýþþýþþþýþþäýþúþýýþþýýþþýýþýþþýþýþþýþþýþþýþþýýþûýþýýþþþýþþþúýýþöýþýýþþýýþýýþýýþýýþþýýþý þúúýýþþýýþþýýûþýýþýýþüýþþýýúþýýþþýý þþýþþöúýýþþýýþþýýûþýýþýýþýýþýþþýýþýýþþýýþýúþýþþýþþþýþþüýþúýýþýûþýþþýýþþýýþþýýþþýýþþýýþûýþþýþþùúþýýþþýýþùýþýýþýþþýþþýýþþýýþüýþþýýþüýþýþþøýþýýþþúýýøþýýþþýýþ þýüþýþýýþýþýõþýþýýþþýþýþþþýþþöúýýþþýýþþýýþþýýøþýþýýþþýýþýþýýþýþþþýþþþýþþûúþþýþþýþþýýüþýþýýþþýýþ ýþþýýýþýþþúýþýþúýýþþýþþ÷ýþþýýþýýþþýüþýþýýþþýýüþýþýýûþýþýþ þþúþþý÷þýýþýýþþýýþþýýþ ýþþýýþý þûúþýýþþýþýþýþýþýþþýýþûýþþýþ þþúþ>þ@@vigor-0.016.orig/vigor/v2cp0000.xbm0100664000076400007640000003115707103707232015310 0ustar cjw44cjw44/* Vigor morphing */ #define v2cp0000_width 128 #define v2cp0000_height 128 static char v2cp0000_bits[] = { 0x08, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x54, 0x55, 0x55, 0x55, 0x95, 0x24, 0x89, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0x88, 0x20, 0x00, 0x00, 0x40, 0x00, 0x20, 0xa0, 0x24, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x22, 0x45, 0x55, 0x25, 0x09, 0x4a, 0x02, 0x02, 0x00, 0x80, 0x24, 0x02, 0x00, 0x00, 0x00, 0x42, 0x14, 0x12, 0x00, 0x10, 0xa4, 0x00, 0x48, 0x80, 0x08, 0x11, 0x00, 0x10, 0x00, 0x00, 0x00, 0x14, 0x41, 0xa2, 0xaa, 0xa2, 0x00, 0x52, 0x81, 0x3c, 0x81, 0xef, 0x03, 0x00, 0x09, 0x00, 0x00, 0xa2, 0x94, 0x08, 0x00, 0x08, 0x92, 0x00, 0x04, 0x67, 0xc8, 0x00, 0x26, 0x40, 0x80, 0x00, 0x00, 0x8a, 0x24, 0x52, 0x55, 0x41, 0x02, 0x4a, 0xb0, 0xc5, 0x67, 0x08, 0x04, 0x02, 0x00, 0x00, 0x00, 0x28, 0x49, 0x01, 0x00, 0x0a, 0x28, 0x00, 0xcd, 0x9d, 0x38, 0x70, 0x44, 0x00, 0x00, 0x04, 0x00, 0x22, 0x11, 0x54, 0x55, 0x50, 0x41, 0x29, 0x64, 0x34, 0xfc, 0x59, 0x04, 0x04, 0x08, 0x00, 0x00, 0x94, 0xa4, 0x22, 0x82, 0x02, 0x0a, 0x80, 0x36, 0xa2, 0x0b, 0x0f, 0x05, 0x20, 0x01, 0x20, 0x00, 0x91, 0x24, 0x8a, 0x28, 0x54, 0x90, 0x12, 0x1b, 0xe6, 0x0f, 0x06, 0x44, 0x00, 0x40, 0x00, 0x00, 0x22, 0x91, 0x50, 0x42, 0x81, 0xe4, 0x0d, 0x49, 0x59, 0x5c, 0x04, 0x06, 0x02, 0x00, 0x00, 0x01, 0x24, 0x25, 0x05, 0x0a, 0x94, 0x38, 0xf7, 0xcd, 0x6c, 0xb2, 0xff, 0x0b, 0x00, 0x04, 0x02, 0x00, 0x45, 0x88, 0xa8, 0x50, 0x01, 0x4e, 0xcd, 0x4e, 0xb6, 0x67, 0xfc, 0x47, 0x24, 0x00, 0x00, 0x00, 0x48, 0x29, 0x12, 0x05, 0x54, 0x8e, 0x98, 0xfa, 0x7b, 0x35, 0xf8, 0x0e, 0x80, 0x20, 0x08, 0x00, 0x15, 0xa1, 0x48, 0xa8, 0x02, 0xe2, 0x92, 0xeb, 0xbb, 0xff, 0x2f, 0x1f, 0x00, 0x04, 0x80, 0x00, 0x51, 0x8a, 0x92, 0x22, 0x54, 0xe5, 0x73, 0x8b, 0xae, 0xff, 0xff, 0x72, 0x09, 0x80, 0x00, 0x04, 0x8a, 0x24, 0x44, 0x44, 0x81, 0x79, 0x66, 0xeb, 0x5e, 0xbf, 0xf1, 0xe3, 0x40, 0x00, 0x00, 0x00, 0xa8, 0xa4, 0x94, 0x14, 0xaa, 0xa6, 0xd8, 0x2f, 0xdf, 0x7e, 0x74, 0x03, 0x00, 0x08, 0x08, 0x00, 0x85, 0x92, 0x20, 0xa1, 0xc0, 0xf3, 0xf7, 0xad, 0xff, 0xfb, 0xef, 0x83, 0x82, 0x80, 0x00, 0x00, 0x29, 0x24, 0x25, 0x0a, 0xca, 0xa3, 0xef, 0x3c, 0xf7, 0xff, 0xaf, 0xef, 0x09, 0x00, 0x40, 0x04, 0x4a, 0x49, 0x92, 0x50, 0xd1, 0xd8, 0xde, 0x3f, 0xf3, 0xdf, 0xbf, 0x36, 0x03, 0x09, 0x01, 0x00, 0x51, 0x92, 0x24, 0x45, 0x44, 0xfe, 0xf7, 0xbf, 0xff, 0xff, 0xff, 0x1f, 0x22, 0x00, 0x08, 0x00, 0x8a, 0x24, 0x49, 0x88, 0xf2, 0xf3, 0xef, 0xff, 0xff, 0xff, 0xff, 0xdc, 0x0f, 0x10, 0x80, 0x10, 0x29, 0x25, 0x49, 0x29, 0x62, 0x72, 0xf7, 0xff, 0xff, 0xff, 0x9f, 0x3c, 0x5b, 0x02, 0x01, 0x00, 0x52, 0x94, 0x24, 0x41, 0xb4, 0x9c, 0xeb, 0xff, 0xff, 0xbf, 0xbf, 0x29, 0x11, 0x20, 0x08, 0x00, 0x44, 0x21, 0x49, 0x4a, 0x99, 0x3c, 0xfd, 0xff, 0xff, 0xff, 0xf3, 0x7f, 0x11, 0x00, 0x00, 0x01, 0x95, 0x4a, 0x22, 0x09, 0x5a, 0x9a, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xe9, 0x91, 0x04, 0x21, 0x00, 0x52, 0x54, 0x4a, 0xa9, 0x98, 0xf6, 0xff, 0xff, 0xff, 0xfb, 0xff, 0xdb, 0x9b, 0x10, 0x00, 0x08, 0xa4, 0x82, 0x08, 0x12, 0xe5, 0xf5, 0xff, 0xf7, 0xff, 0xf3, 0xf1, 0xff, 0x8e, 0x00, 0x02, 0x01, 0x4a, 0xaa, 0x52, 0x52, 0x34, 0xb7, 0xfd, 0xe3, 0xff, 0xf1, 0xdf, 0xff, 0x0c, 0x21, 0x10, 0x00, 0x92, 0x14, 0xa9, 0x44, 0x79, 0x7f, 0xff, 0xe3, 0xff, 0xf0, 0x7f, 0x63, 0x1e, 0x18, 0x00, 0x08, 0x24, 0x51, 0x0a, 0x15, 0xcd, 0xad, 0xff, 0xc1, 0x7f, 0xe0, 0x65, 0x62, 0x3b, 0x40, 0x82, 0x00, 0x55, 0x25, 0x51, 0xa4, 0xf6, 0x9f, 0xfe, 0x81, 0x3f, 0xe0, 0x9d, 0xfe, 0x91, 0x00, 0x10, 0x10, 0x49, 0x4a, 0x4a, 0x09, 0x9b, 0xf7, 0xff, 0x01, 0x3f, 0xe0, 0xf7, 0xf9, 0x31, 0x09, 0x00, 0x00, 0x92, 0x94, 0x24, 0x52, 0xa9, 0xeb, 0xff, 0x01, 0x1e, 0xe0, 0xff, 0xa3, 0x23, 0x20, 0x21, 0x01, 0x55, 0x51, 0x49, 0x92, 0xc5, 0xff, 0xff, 0x01, 0x0c, 0xc0, 0x8f, 0x87, 0x23, 0x00, 0x02, 0x08, 0x92, 0x8a, 0x54, 0xe9, 0xf4, 0xfb, 0xf6, 0x01, 0x00, 0xc0, 0xfb, 0x23, 0xa3, 0x1a, 0x00, 0x00, 0x24, 0x29, 0x11, 0x42, 0xdd, 0xe7, 0xff, 0x00, 0x00, 0xc0, 0xcf, 0x9f, 0x27, 0x50, 0x24, 0x11, 0x55, 0x52, 0xa5, 0x54, 0xb6, 0xfb, 0xff, 0x00, 0x00, 0xc0, 0x7b, 0xf5, 0x2f, 0x40, 0x00, 0x00, 0x92, 0x4a, 0xa4, 0x52, 0x97, 0xff, 0xff, 0x00, 0x09, 0xc0, 0x8f, 0x67, 0xaa, 0x04, 0x21, 0x00, 0xaa, 0xa4, 0x8a, 0xa4, 0x59, 0xaf, 0xff, 0x00, 0x0f, 0xc0, 0xff, 0x37, 0x3a, 0x10, 0x84, 0x04, 0x24, 0x29, 0x91, 0xa4, 0xdb, 0xfb, 0xfb, 0x01, 0x0b, 0xc0, 0xff, 0x77, 0x3a, 0x21, 0x00, 0x10, 0xa9, 0x92, 0x2a, 0xd5, 0x68, 0xf2, 0xfe, 0x01, 0x0f, 0xc0, 0x7f, 0x7f, 0x1a, 0x82, 0x08, 0x00, 0x25, 0x55, 0x4a, 0xc5, 0xba, 0xfa, 0xff, 0x01, 0x0e, 0xe0, 0xd7, 0x7f, 0x5e, 0x04, 0x90, 0x04, 0xaa, 0x24, 0x11, 0xd2, 0x5e, 0xde, 0xfb, 0x01, 0x1f, 0xe0, 0xff, 0xf7, 0x0e, 0x10, 0x01, 0x10, 0x49, 0x49, 0xaa, 0xd4, 0xcf, 0xff, 0xff, 0x81, 0x1f, 0xe0, 0xbf, 0xd7, 0x03, 0x21, 0x80, 0x00, 0x2a, 0x55, 0xa5, 0x22, 0x37, 0x7d, 0xff, 0xe3, 0x7f, 0xf0, 0xff, 0xf3, 0x29, 0x04, 0x25, 0x20, 0x52, 0x25, 0x29, 0x4a, 0xdf, 0xf7, 0xff, 0xff, 0xff, 0x7f, 0xbf, 0x8f, 0x40, 0x00, 0x80, 0x04, 0x4a, 0x4a, 0x52, 0x29, 0xe7, 0xb9, 0xff, 0xff, 0xff, 0x7f, 0xff, 0xbf, 0x29, 0x29, 0x04, 0x00, 0xaa, 0x54, 0x45, 0x4a, 0x6e, 0xae, 0xff, 0xff, 0xff, 0x3f, 0x7f, 0x3b, 0x3f, 0x80, 0x88, 0x10, 0x52, 0xa9, 0xaa, 0x50, 0xb7, 0xdc, 0xff, 0xfe, 0xff, 0x3f, 0x7f, 0x7f, 0x3e, 0x09, 0x00, 0x02, 0x25, 0x95, 0x24, 0x57, 0x9a, 0xae, 0xff, 0xfc, 0xff, 0x1f, 0xfe, 0xdf, 0x18, 0x40, 0x22, 0x00, 0xaa, 0x52, 0x49, 0x51, 0x39, 0xd7, 0xff, 0xf8, 0xff, 0x0f, 0x7e, 0x91, 0xff, 0x32, 0x08, 0x12, 0x4a, 0x4a, 0x2a, 0xa5, 0x6d, 0xff, 0xff, 0xf0, 0xff, 0x0f, 0xfe, 0x77, 0x80, 0x80, 0x40, 0x00, 0xaa, 0x52, 0xa5, 0x34, 0xd6, 0xff, 0xff, 0xe0, 0xff, 0x07, 0xfe, 0x77, 0xc9, 0x12, 0x02, 0x12, 0x52, 0x95, 0x94, 0xb2, 0x66, 0xbf, 0xff, 0xe0, 0xff, 0x03, 0xfe, 0xff, 0xc1, 0x20, 0x48, 0x00, 0x4a, 0xaa, 0x52, 0x5a, 0xba, 0xfd, 0xfd, 0x80, 0xff, 0x00, 0xff, 0xa7, 0x5b, 0x82, 0x00, 0x12, 0x55, 0x25, 0x95, 0x92, 0xb6, 0x6a, 0xfd, 0x01, 0x3c, 0x00, 0xfd, 0x6f, 0x7e, 0x08, 0x49, 0x00, 0xaa, 0x54, 0x52, 0x3c, 0xc9, 0x3a, 0xff, 0x01, 0x00, 0xc0, 0xfe, 0x4f, 0x1f, 0x21, 0x00, 0x12, 0x4a, 0x55, 0x55, 0x51, 0xff, 0xf6, 0xfe, 0x11, 0x00, 0x20, 0xfe, 0x73, 0x0c, 0x44, 0x4a, 0x00, 0xaa, 0xa4, 0xa4, 0x5a, 0x35, 0xdf, 0xff, 0x0d, 0x81, 0x2d, 0xfe, 0x7f, 0xac, 0x00, 0x00, 0x49, 0xaa, 0x4a, 0x49, 0x52, 0xbd, 0x6e, 0xff, 0x01, 0x8a, 0x35, 0xfe, 0xfd, 0x89, 0x94, 0x24, 0x00, 0x92, 0xaa, 0xaa, 0xb4, 0xe7, 0xaf, 0xfe, 0x83, 0x0e, 0x02, 0xfe, 0xcf, 0x0f, 0x02, 0x00, 0x09, 0xaa, 0x94, 0x92, 0xea, 0x37, 0xfe, 0xf7, 0x43, 0x16, 0x00, 0xff, 0x9d, 0xa1, 0x50, 0x25, 0x20, 0x55, 0xa5, 0xaa, 0x94, 0x5e, 0x9d, 0xff, 0x47, 0x50, 0x00, 0xff, 0xbf, 0x85, 0x04, 0x80, 0x04, 0x55, 0x55, 0x4a, 0xa5, 0xbc, 0x3c, 0xef, 0x2f, 0x20, 0x80, 0xdf, 0x3f, 0x15, 0x90, 0x14, 0x08, 0x4a, 0x95, 0x2a, 0x29, 0x8d, 0xfa, 0xfb, 0x0f, 0x20, 0x80, 0xff, 0x6f, 0x43, 0x01, 0x40, 0x20, 0xaa, 0x54, 0xa9, 0x4a, 0x3a, 0xbe, 0xdf, 0x1f, 0x00, 0xf0, 0x7f, 0xff, 0x15, 0x54, 0x09, 0x05, 0x55, 0x55, 0x25, 0x55, 0xfa, 0x7d, 0xf7, 0x3f, 0x00, 0xf8, 0xff, 0x7f, 0x43, 0x01, 0x20, 0x20, 0x55, 0x29, 0x55, 0x52, 0xa5, 0x5d, 0xff, 0x3f, 0xf8, 0xfc, 0xff, 0x7b, 0x0e, 0x49, 0x45, 0x04, 0xaa, 0xaa, 0xaa, 0x4a, 0xd5, 0x5e, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xf3, 0x2c, 0x04, 0x10, 0x21, 0xa5, 0xaa, 0xa4, 0x94, 0xd3, 0x7e, 0xf9, 0xff, 0xff, 0xff, 0xdf, 0xe7, 0xa1, 0xa8, 0x02, 0x04, 0xaa, 0x52, 0x55, 0x55, 0xee, 0xdb, 0x5f, 0xff, 0xff, 0xff, 0xff, 0xad, 0x3f, 0x02, 0x28, 0x21, 0x2a, 0x55, 0x95, 0x52, 0xfd, 0xfa, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xfd, 0x40, 0x48, 0x01, 0x04, 0x55, 0xa5, 0x2a, 0x95, 0x44, 0xed, 0x66, 0xff, 0xff, 0xff, 0xf7, 0xf3, 0x0b, 0x21, 0x54, 0x10, 0x55, 0x55, 0xa9, 0x54, 0xd5, 0xf8, 0xce, 0xff, 0xff, 0xff, 0x7f, 0xa7, 0x50, 0x84, 0x80, 0x22, 0xaa, 0xaa, 0xaa, 0x92, 0xd4, 0x7a, 0xf7, 0xff, 0xff, 0xff, 0xff, 0x6f, 0x02, 0x11, 0x12, 0x00, 0xaa, 0xaa, 0x52, 0x55, 0xa5, 0x7a, 0xf6, 0xbf, 0xff, 0xff, 0xff, 0xde, 0x54, 0x44, 0x82, 0x14, 0x55, 0x55, 0x95, 0xaa, 0xd4, 0xfd, 0x7f, 0xff, 0xbf, 0xed, 0xff, 0x7e, 0x12, 0x11, 0x28, 0x40, 0xaa, 0x4a, 0x55, 0x49, 0x95, 0xee, 0x7f, 0xff, 0xf7, 0xfd, 0xff, 0xe5, 0x51, 0x44, 0x01, 0x09, 0x55, 0x55, 0x55, 0x55, 0x25, 0x6d, 0x9f, 0xff, 0xff, 0xdf, 0xff, 0xdf, 0x22, 0x11, 0xaa, 0x20, 0x55, 0x55, 0x2a, 0x55, 0x2a, 0x7d, 0xdf, 0xfe, 0xff, 0x79, 0xff, 0xfc, 0x0a, 0x52, 0x00, 0x05, 0xaa, 0xaa, 0x52, 0x49, 0xd5, 0xfa, 0xff, 0xff, 0xf7, 0x7f, 0xbf, 0x89, 0xa1, 0x18, 0x25, 0x10, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x7a, 0x9d, 0xf7, 0xf5, 0xfe, 0x7f, 0xdb, 0x15, 0x21, 0x44, 0x22, 0x55, 0x55, 0x55, 0x55, 0xd5, 0xbd, 0xdc, 0xf7, 0x77, 0xf5, 0xf7, 0x56, 0xa3, 0x44, 0x10, 0x01, 0x55, 0x55, 0x55, 0x49, 0x29, 0x7f, 0xff, 0xff, 0xf7, 0xf4, 0xe6, 0x5d, 0x06, 0x89, 0x22, 0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0xca, 0xe8, 0xef, 0x97, 0xf7, 0x75, 0x45, 0x9d, 0x2a, 0x24, 0x84, 0x00, 0x55, 0x55, 0xa5, 0x2a, 0x95, 0x27, 0xbf, 0x13, 0x9e, 0x76, 0xc5, 0x33, 0xa3, 0x84, 0x10, 0x24, 0xaa, 0xaa, 0x55, 0x55, 0x29, 0xfd, 0x76, 0x9a, 0xdf, 0xaa, 0x8f, 0xbb, 0x04, 0x51, 0x4a, 0x11, 0xab, 0x2a, 0x55, 0x55, 0x55, 0xa9, 0xb4, 0x53, 0x9b, 0xab, 0x1f, 0x23, 0x54, 0x84, 0x00, 0x02, 0xaa, 0xaa, 0xaa, 0x54, 0x55, 0xaa, 0xdf, 0xd9, 0xe7, 0xb2, 0x0a, 0xff, 0x10, 0x29, 0xaa, 0x28, 0xad, 0xaa, 0xaa, 0x4a, 0x49, 0xa5, 0xd4, 0x99, 0xef, 0x32, 0x3a, 0x66, 0x25, 0xa1, 0x00, 0x01, 0xaa, 0xaa, 0xaa, 0xaa, 0x56, 0x29, 0xbd, 0x98, 0xc3, 0x5a, 0xf0, 0x92, 0x90, 0x14, 0x15, 0x2a, 0xaa, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xf8, 0xda, 0x14, 0x00, 0x94, 0x12, 0x21, 0x50, 0x20, 0xad, 0xaa, 0xaa, 0x2a, 0x95, 0x52, 0x65, 0xb0, 0xe2, 0xa2, 0x20, 0x49, 0x24, 0x4a, 0x85, 0x02, 0x55, 0xad, 0xaa, 0xaa, 0xaa, 0x4a, 0x2a, 0x91, 0xec, 0x34, 0x05, 0x90, 0xa4, 0x08, 0x10, 0x2a, 0x5a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x15, 0x84, 0x29, 0x45, 0x20, 0x29, 0x11, 0x51, 0xa5, 0x00, 0x55, 0x55, 0x55, 0x55, 0x29, 0xa9, 0x54, 0x10, 0x25, 0x29, 0x02, 0x40, 0x25, 0x45, 0x04, 0x2a, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x0d, 0x41, 0x49, 0x4a, 0x48, 0xd2, 0x48, 0x88, 0xa8, 0x40, 0xab, 0x6d, 0x55, 0x55, 0x55, 0x55, 0x09, 0x02, 0x55, 0xa9, 0x00, 0x00, 0x89, 0x92, 0x02, 0x0a, 0x6a, 0x55, 0x55, 0x95, 0xaa, 0x2a, 0x23, 0x08, 0x25, 0x92, 0x24, 0x02, 0x52, 0x24, 0x54, 0x11, 0x56, 0x55, 0x55, 0x55, 0xa5, 0x52, 0x43, 0x20, 0x49, 0xaf, 0x40, 0x50, 0x0c, 0x89, 0x04, 0x22, 0x55, 0x55, 0x55, 0x55, 0x55, 0xd5, 0x00, 0x01, 0xeb, 0xaf, 0x04, 0x82, 0xa8, 0x24, 0x51, 0x04, 0xb5, 0x6d, 0x55, 0x55, 0x55, 0x4a, 0x12, 0x24, 0xd2, 0x3f, 0x40, 0x04, 0x91, 0x24, 0x92, 0x28, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x1a, 0x40, 0x00, 0xd6, 0x5f, 0x09, 0x2c, 0x22, 0x49, 0x49, 0x42, 0x55, 0x55, 0xab, 0xaa, 0xaa, 0x8a, 0x04, 0x4a, 0x24, 0x2f, 0x80, 0x50, 0x24, 0x11, 0x42, 0x0a, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x0a, 0x91, 0x14, 0xa8, 0x91, 0x34, 0x60, 0xc8, 0x4a, 0x09, 0x51, 0xd6, 0xb6, 0x5a, 0x55, 0x29, 0x97, 0x22, 0xac, 0x24, 0x0d, 0xc0, 0x45, 0x09, 0x11, 0x52, 0x04, 0xb5, 0xaa, 0x55, 0x55, 0xfd, 0x83, 0x20, 0x32, 0xac, 0x4a, 0xda, 0x80, 0x11, 0xa5, 0x84, 0x52, 0xaa, 0x56, 0x55, 0x55, 0xff, 0x57, 0x58, 0x8a, 0xa4, 0x10, 0x10, 0x09, 0x26, 0x8a, 0x28, 0x04, 0x6b, 0xb5, 0x6a, 0x55, 0xff, 0x43, 0x19, 0x3d, 0xba, 0x98, 0xa6, 0x23, 0xcd, 0x52, 0x92, 0x28, 0xda, 0xaa, 0x56, 0xab, 0xfe, 0x4e, 0x1a, 0xa3, 0x5d, 0x83, 0x75, 0x0c, 0x88, 0x46, 0x22, 0x21, 0xab, 0xb5, 0x55, 0x55, 0xfe, 0x77, 0x10, 0x78, 0x3e, 0x49, 0xfd, 0x25, 0x10, 0x97, 0x94, 0x04, 0xaa, 0x56, 0x55, 0xd5, 0xf6, 0x7f, 0x40, 0xaa, 0xa7, 0xb0, 0x3e, 0x69, 0x22, 0x25, 0x21, 0x29, 0x5b, 0x55, 0xdb, 0xaa, 0xea, 0xcf, 0x0b, 0xf6, 0x5f, 0xd7, 0x79, 0x52, 0x28, 0x96, 0x94, 0x44, 0xb6, 0x6d, 0x55, 0x5b, 0x95, 0xff, 0x2a, 0xfa, 0x3f, 0x95, 0xfe, 0xa7, 0xe0, 0x26, 0x91, 0x14, 0x55, 0x55, 0x55, 0x55, 0x55, 0xbf, 0x93, 0xfa, 0xff, 0x52, 0xfe, 0x4b, 0xa3, 0x96, 0x22, 0x42, 0x6d, 0x5b, 0x5b, 0x55, 0x55, 0xee, 0xdf, 0xd5, 0xff, 0x9f, 0xfe, 0xff, 0xcc, 0x2d, 0x8a, 0x14, 0xd5, 0x6a, 0xd5, 0xaa, 0xaa, 0x51, 0x55, 0xaa, 0xff, 0x7f, 0xf6, 0xfe, 0xb7, 0x46, 0x51, 0x22, 0xad, 0xd6, 0xaa, 0xda, 0x5a, 0xab, 0xaa, 0xaa, 0xe0, 0x4f, 0x49, 0xf7, 0x27, 0x29, 0x46, 0x24, 0xdb, 0xaa, 0x56, 0xab, 0xaa, 0xaa, 0xaa, 0x24, 0x9b, 0x54, 0x95, 0x08, 0xff, 0xff, 0x97, 0x12, 0xaa, 0xad, 0x6d, 0x55, 0x55, 0x55, 0x55, 0x55, 0x52, 0x55, 0x52, 0x55, 0xcd, 0x43, 0x24, 0x22, 0x5b, 0xb5, 0xaa, 0xaa, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x4a, 0x29, 0x12, 0x94, 0x92, 0x14, 0xb6, 0xad, 0x5a, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xa5, 0xa4, 0x92, 0x24, 0x21, 0x55, 0x6b, 0x6b, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x4a, 0xa5, 0x54, 0x4a, 0x55, 0x24, 0x49, 0x4a, 0xdd, 0xda, 0x56, 0xb5, 0xda, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0xa5, 0x52, 0x92, 0x4a, 0x4a, 0x12 }; vigor-0.016.orig/vigor/v2cp0001.xbm0100664000076400007640000003115707103707232015311 0ustar cjw44cjw44/* Vigor morphing */ #define v2cp0001_width 128 #define v2cp0001_height 128 static char v2cp0001_bits[] = { 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x29, 0x55, 0x55, 0x55, 0x55, 0x55, 0x92, 0x24, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x24, 0x02, 0x00, 0x00, 0x00, 0x01, 0x80, 0x80, 0x92, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0x88, 0xa8, 0xaa, 0xaa, 0x24, 0x54, 0x12, 0x08, 0x00, 0x80, 0x24, 0x11, 0x00, 0x00, 0x00, 0x22, 0x51, 0x12, 0x00, 0x00, 0x82, 0x00, 0x80, 0x00, 0x22, 0x04, 0x00, 0x80, 0x00, 0x00, 0x00, 0x24, 0x45, 0xa2, 0xaa, 0x4a, 0x14, 0x92, 0x12, 0x5e, 0x84, 0xd5, 0x03, 0x00, 0x22, 0x00, 0x00, 0x92, 0x08, 0x09, 0x01, 0x20, 0x40, 0x40, 0xc0, 0x33, 0xe0, 0x2a, 0x92, 0x00, 0x00, 0x00, 0x00, 0x12, 0x29, 0x51, 0x54, 0x85, 0x4a, 0x0a, 0xda, 0xe2, 0x33, 0x40, 0x06, 0x12, 0x80, 0x04, 0x00, 0xa4, 0x44, 0x82, 0x02, 0x28, 0x00, 0xa1, 0xe4, 0x5e, 0x0e, 0x01, 0x05, 0x00, 0x04, 0x00, 0x00, 0x89, 0x48, 0x2a, 0x54, 0x21, 0x29, 0x88, 0x6c, 0x5a, 0x3e, 0x3c, 0x24, 0x40, 0x00, 0x40, 0x00, 0x24, 0x25, 0x84, 0x00, 0x82, 0x84, 0x12, 0x12, 0x91, 0x7f, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x49, 0x88, 0x28, 0x55, 0x2a, 0x10, 0x44, 0x3b, 0xf2, 0xc3, 0x06, 0x06, 0x08, 0x22, 0x04, 0x00, 0x92, 0x52, 0x41, 0x88, 0x80, 0xa2, 0x12, 0xc9, 0x2c, 0x83, 0x11, 0x13, 0x00, 0x00, 0x00, 0x01, 0x24, 0x12, 0x4a, 0x11, 0x2a, 0xa4, 0xa8, 0xcd, 0x36, 0x17, 0x43, 0x23, 0x41, 0x40, 0x00, 0x00, 0x52, 0x49, 0x09, 0xa5, 0x80, 0xfc, 0xf7, 0x2e, 0x5b, 0xed, 0xfd, 0x01, 0x08, 0x02, 0x08, 0x00, 0x0a, 0x49, 0x52, 0x04, 0x95, 0x2c, 0xcf, 0xfa, 0xbd, 0x39, 0xff, 0x0f, 0x00, 0x00, 0x00, 0x02, 0x50, 0x12, 0x09, 0x51, 0x20, 0x47, 0x99, 0x65, 0xdd, 0x8e, 0xbe, 0x5f, 0x22, 0x44, 0x00, 0x00, 0x95, 0x24, 0x51, 0x84, 0x0a, 0x92, 0x12, 0x4f, 0xdf, 0x7d, 0x9b, 0x72, 0x00, 0x00, 0x20, 0x00, 0x22, 0x49, 0x8a, 0x52, 0xd0, 0xe9, 0x74, 0xeb, 0x6b, 0xef, 0x77, 0xe1, 0x40, 0x80, 0x04, 0x04, 0x4a, 0x92, 0x28, 0x84, 0x82, 0xfa, 0x67, 0x2b, 0xaf, 0x7e, 0xfd, 0x03, 0x09, 0x09, 0x00, 0x00, 0x94, 0x24, 0x41, 0x29, 0xd4, 0x57, 0xda, 0xad, 0xef, 0xaf, 0xbc, 0x89, 0x00, 0x00, 0x40, 0x00, 0x21, 0x49, 0x4a, 0x42, 0xc1, 0x65, 0xf4, 0x2d, 0xff, 0x3d, 0xf5, 0xe3, 0x11, 0x80, 0x00, 0x00, 0x4a, 0x92, 0x14, 0x29, 0xca, 0xb8, 0x6f, 0xde, 0xd9, 0xfe, 0xd7, 0x37, 0x43, 0x12, 0x04, 0x02, 0x94, 0x24, 0x51, 0x84, 0x50, 0xb2, 0xff, 0x9f, 0xfb, 0xef, 0xdf, 0x1e, 0x02, 0x00, 0x00, 0x08, 0x29, 0x49, 0x8a, 0x52, 0xea, 0xdf, 0xea, 0xdf, 0xfd, 0x7d, 0xff, 0xdd, 0x0f, 0x40, 0x08, 0x00, 0xa2, 0x92, 0x28, 0x12, 0xe1, 0xf2, 0xff, 0xfe, 0xef, 0xff, 0xfb, 0x3c, 0x9b, 0x04, 0x40, 0x00, 0x4a, 0x2a, 0x45, 0x49, 0x3a, 0xfa, 0xeb, 0xff, 0xff, 0xf7, 0x9e, 0x2a, 0x11, 0x80, 0x00, 0x00, 0x54, 0x42, 0x14, 0x49, 0x58, 0x5e, 0xed, 0xbb, 0xbf, 0xff, 0xef, 0x7f, 0x91, 0x08, 0x08, 0x09, 0x89, 0x54, 0x51, 0x92, 0x9a, 0xd6, 0xf7, 0xff, 0xff, 0xdf, 0xb7, 0xe9, 0x19, 0x00, 0x01, 0x00, 0x29, 0x15, 0x45, 0x22, 0x98, 0x9e, 0xbe, 0xff, 0xff, 0xfd, 0xfa, 0xdb, 0x9b, 0x22, 0x20, 0x00, 0x52, 0x48, 0x92, 0x94, 0xea, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xff, 0x8e, 0x00, 0x04, 0x11, 0x95, 0xa9, 0x24, 0x21, 0x31, 0xfb, 0xff, 0xf9, 0xff, 0xdb, 0xff, 0xf7, 0x0c, 0x44, 0x00, 0x00, 0x24, 0x22, 0x49, 0x96, 0xfc, 0xdb, 0xdd, 0xfc, 0xfd, 0xf3, 0xd1, 0x2b, 0x2f, 0x10, 0x10, 0x00, 0xa9, 0x4a, 0x52, 0x92, 0x4c, 0xbf, 0xff, 0xf0, 0xff, 0xe1, 0x7f, 0x73, 0x19, 0x01, 0x02, 0x12, 0x52, 0x92, 0x8a, 0x24, 0xf7, 0xd7, 0x7f, 0xbc, 0xf7, 0xf8, 0x7d, 0xfa, 0x28, 0x24, 0x20, 0x00, 0x8a, 0xaa, 0x90, 0x24, 0x93, 0x5f, 0xfd, 0xe0, 0xff, 0xc0, 0xeb, 0xf6, 0x51, 0x80, 0x40, 0x00, 0x52, 0x44, 0x55, 0x92, 0xcc, 0xfd, 0x3f, 0xd0, 0x1f, 0xc0, 0xdf, 0xc9, 0x14, 0x04, 0x02, 0x22, 0x54, 0x15, 0x45, 0xa4, 0xcc, 0xf5, 0x7f, 0xa0, 0xbe, 0xc0, 0xf6, 0xcb, 0xb1, 0x10, 0x04, 0x00, 0x25, 0xa9, 0xa8, 0xb2, 0xf2, 0xff, 0x3b, 0x82, 0x0f, 0xc0, 0xbf, 0xa3, 0x11, 0x14, 0x20, 0x04, 0x49, 0x92, 0x8a, 0xc4, 0xdc, 0x7d, 0x7f, 0x00, 0x0c, 0xc4, 0xdf, 0x8b, 0x13, 0x90, 0x40, 0x00, 0xaa, 0x4a, 0x52, 0x52, 0xb6, 0xf5, 0x3f, 0x00, 0x00, 0x80, 0xf7, 0xef, 0x57, 0x62, 0x04, 0x08, 0x4a, 0x52, 0x92, 0x54, 0x97, 0xff, 0x3f, 0x00, 0x00, 0x80, 0xdf, 0x35, 0x15, 0x00, 0x80, 0x00, 0x92, 0xa4, 0x24, 0xc9, 0x59, 0xff, 0x1d, 0x00, 0x00, 0x80, 0xb7, 0x97, 0x9e, 0x84, 0x08, 0x08, 0xaa, 0x2a, 0xa9, 0x92, 0xd9, 0xdd, 0x3f, 0x40, 0x9d, 0x00, 0xdf, 0x3b, 0x95, 0x10, 0x81, 0x10, 0x52, 0x42, 0x45, 0xa6, 0x6a, 0xfd, 0x1f, 0xe0, 0x05, 0x80, 0xff, 0xbf, 0x0e, 0x01, 0x08, 0x00, 0x95, 0x9a, 0x94, 0xd4, 0x3a, 0xbd, 0x3f, 0xc4, 0x1d, 0x01, 0x7f, 0x37, 0x27, 0x44, 0x20, 0x02, 0x52, 0x22, 0x29, 0xd1, 0x5e, 0xfe, 0x3f, 0xe0, 0x0f, 0x80, 0xff, 0xbf, 0x01, 0x11, 0x01, 0x08, 0x55, 0x55, 0x25, 0xc5, 0xcd, 0xff, 0x7a, 0x00, 0x1f, 0x00, 0xcd, 0xf7, 0x25, 0x00, 0x88, 0x10, 0x92, 0x2a, 0xa9, 0x54, 0xb7, 0xfe, 0x1f, 0xe4, 0x07, 0x80, 0xff, 0xbb, 0x80, 0x92, 0x20, 0x00, 0x2a, 0x49, 0x92, 0x12, 0xaf, 0xbb, 0x3f, 0xc0, 0x3f, 0x80, 0xbf, 0x6b, 0x14, 0x00, 0x02, 0x02, 0x52, 0x52, 0x25, 0xa5, 0xd6, 0xfe, 0x7b, 0xf8, 0x3f, 0xe0, 0xff, 0x53, 0x89, 0x24, 0x88, 0x48, 0x55, 0x95, 0x54, 0x54, 0x7e, 0xd6, 0xff, 0xfd, 0xff, 0xc3, 0xbf, 0xaf, 0x1f, 0x80, 0x10, 0x00, 0x52, 0x65, 0x49, 0xc9, 0xb6, 0xee, 0xff, 0xef, 0xff, 0xf5, 0xfe, 0x5f, 0x47, 0x25, 0x00, 0x01, 0x95, 0x94, 0x52, 0x93, 0x9a, 0xde, 0xb6, 0xff, 0xfe, 0xff, 0xbe, 0x6e, 0x16, 0x80, 0x22, 0x12, 0xaa, 0x2a, 0x25, 0x6a, 0xbc, 0xeb, 0xdf, 0xff, 0xff, 0x7f, 0xfe, 0xef, 0xbf, 0x34, 0x08, 0x00, 0x92, 0x52, 0xaa, 0xe4, 0x6c, 0xff, 0x3f, 0xff, 0xfb, 0x7f, 0xfe, 0x19, 0x20, 0x00, 0x00, 0x12, 0x2a, 0xa5, 0x52, 0x29, 0xc5, 0xff, 0xbf, 0xff, 0xff, 0x37, 0xbc, 0x5a, 0xa8, 0xa4, 0x24, 0x00, 0xaa, 0x54, 0x8a, 0xb2, 0x76, 0xbf, 0x3f, 0xbe, 0xef, 0x3f, 0xfc, 0xb7, 0xb2, 0x00, 0x40, 0x12, 0xa9, 0x4a, 0x29, 0x95, 0xba, 0xdd, 0x1f, 0xfe, 0xff, 0x0f, 0xff, 0xdf, 0x0c, 0x4a, 0x09, 0x00, 0xaa, 0xaa, 0xaa, 0xb4, 0x92, 0xfd, 0x3e, 0xf8, 0xff, 0x1f, 0xfc, 0xb2, 0x4f, 0x00, 0x80, 0x24, 0x25, 0x49, 0x52, 0x19, 0x6d, 0xb7, 0x3f, 0x78, 0xef, 0x0f, 0xfe, 0xd7, 0x13, 0x49, 0x2a, 0x00, 0xaa, 0xaa, 0x4a, 0xb2, 0x6d, 0xbe, 0x7f, 0xe0, 0xff, 0x07, 0xfe, 0x17, 0x23, 0x08, 0x00, 0x09, 0xaa, 0x4a, 0xa9, 0x4a, 0xb5, 0x6b, 0x37, 0xa2, 0xbe, 0x00, 0xff, 0x1d, 0x83, 0xa2, 0x48, 0x20, 0x2a, 0x29, 0x25, 0x59, 0x9d, 0xf6, 0x7f, 0x00, 0x76, 0x80, 0xfc, 0x7d, 0x16, 0x00, 0x01, 0x02, 0xa9, 0xaa, 0x4a, 0xb5, 0xf7, 0xdf, 0x7f, 0x04, 0x00, 0xa4, 0xfe, 0xf7, 0xa1, 0x0a, 0x24, 0x48, 0xaa, 0xaa, 0x54, 0xe9, 0xb7, 0x3e, 0xff, 0x06, 0x00, 0x20, 0xfe, 0x4f, 0x24, 0xa0, 0x00, 0x01, 0xa5, 0x24, 0x95, 0x12, 0x16, 0xfd, 0x7b, 0xc1, 0x80, 0x2d, 0xfe, 0x76, 0x81, 0x04, 0x2a, 0x04, 0xaa, 0xaa, 0x2a, 0xd5, 0xbc, 0x9a, 0xfb, 0x00, 0x85, 0x35, 0xfe, 0x8f, 0x94, 0x50, 0x80, 0x20, 0x55, 0x55, 0xa9, 0x2a, 0x4d, 0xbd, 0xff, 0x71, 0x07, 0x02, 0xff, 0x7f, 0x01, 0x02, 0x09, 0x0a, 0x55, 0x55, 0x25, 0x49, 0x5a, 0xfe, 0xf7, 0x03, 0x57, 0x00, 0xef, 0xf7, 0x54, 0x2a, 0x50, 0x00, 0x4a, 0x92, 0xaa, 0x52, 0xfd, 0xdf, 0xfc, 0x19, 0x48, 0x90, 0xff, 0x9f, 0x01, 0x80, 0x02, 0x12, 0x55, 0x55, 0x2a, 0x55, 0xa1, 0xfd, 0xff, 0x17, 0x28, 0x80, 0xbd, 0x3e, 0xab, 0x12, 0x49, 0x20, 0xaa, 0xaa, 0x52, 0x25, 0xcb, 0xae, 0xf3, 0x0b, 0x00, 0xf0, 0xff, 0xbd, 0x08, 0x48, 0x20, 0x05, 0xaa, 0xaa, 0xaa, 0x54, 0x57, 0xbe, 0xff, 0x1f, 0x00, 0xf8, 0xff, 0xf5, 0x5f, 0x01, 0x05, 0x10, 0x55, 0xa5, 0x92, 0x4a, 0xef, 0xff, 0xfc, 0x17, 0x7c, 0xfc, 0xff, 0x5b, 0x00, 0x4a, 0x90, 0x44, 0x55, 0x55, 0x55, 0x55, 0xfc, 0xb4, 0xfb, 0xbf, 0xfb, 0xff, 0xee, 0xfe, 0x52, 0x08, 0x12, 0x00, 0xaa, 0xaa, 0x2a, 0xa9, 0x42, 0xff, 0xad, 0xff, 0xff, 0xff, 0xff, 0x3d, 0x04, 0xa1, 0x40, 0x09, 0xaa, 0xaa, 0xaa, 0x92, 0x6c, 0xe8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xab, 0x28, 0x0a, 0x0a, 0x21, 0x55, 0xa5, 0x52, 0x55, 0xc9, 0x3f, 0xb3, 0xff, 0xbb, 0xfd, 0xbb, 0x1d, 0x41, 0xa0, 0x20, 0x04, 0x4a, 0x55, 0x55, 0xa5, 0xaa, 0x78, 0xe7, 0xbb, 0xff, 0xff, 0xff, 0x37, 0x8d, 0x0a, 0x84, 0x28, 0x55, 0x55, 0x95, 0x2a, 0x95, 0x7f, 0xfb, 0xff, 0xff, 0xff, 0x7b, 0x5f, 0x24, 0xa0, 0x12, 0x02, 0x55, 0x55, 0x55, 0xaa, 0xaa, 0xfe, 0xff, 0xff, 0xff, 0xfb, 0x7f, 0xbb, 0x84, 0x0a, 0x40, 0x20, 0xaa, 0x2a, 0x55, 0x55, 0x52, 0xed, 0xbf, 0xd7, 0xad, 0xee, 0xff, 0x37, 0x52, 0xa8, 0x0a, 0x05, 0x55, 0x55, 0xa9, 0x52, 0x95, 0x7e, 0x3f, 0xff, 0xff, 0xfe, 0xf7, 0xff, 0x44, 0x12, 0x28, 0x24, 0xaa, 0xaa, 0xaa, 0x54, 0x65, 0x7d, 0xd7, 0xff, 0xfb, 0xef, 0x3f, 0x73, 0xd0, 0xa4, 0x40, 0x10, 0xaa, 0xaa, 0xaa, 0x4a, 0x5a, 0xfa, 0xff, 0xde, 0xff, 0xbc, 0xff, 0xd6, 0x05, 0x84, 0x8a, 0x02, 0x55, 0x55, 0x55, 0x55, 0xe5, 0x3d, 0xdd, 0x7f, 0xfb, 0xbd, 0xaf, 0xad, 0xa8, 0x08, 0x10, 0x28, 0x55, 0x55, 0x55, 0x55, 0x15, 0x7f, 0xbd, 0xf3, 0x76, 0xfb, 0xbb, 0x97, 0x02, 0xa9, 0xa2, 0x02, 0xaa, 0xaa, 0xaa, 0x2a, 0x65, 0xe9, 0xde, 0xff, 0x6b, 0x7b, 0x7b, 0xef, 0x54, 0x04, 0x04, 0x28, 0xab, 0xaa, 0x4a, 0xa9, 0xaa, 0xab, 0xff, 0xdf, 0x7f, 0xfa, 0x62, 0x0d, 0x41, 0x51, 0x51, 0x01, 0xaa, 0xaa, 0x55, 0x55, 0x4a, 0xfe, 0xbe, 0x91, 0xda, 0xdb, 0xb2, 0xae, 0x14, 0x04, 0x04, 0x2a, 0xaa, 0x2a, 0x55, 0x55, 0x55, 0xa9, 0x64, 0x33, 0x5f, 0xdb, 0xe7, 0x9c, 0xa4, 0x54, 0x51, 0x00, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xbf, 0xcd, 0xab, 0xd9, 0xc3, 0x5f, 0x12, 0x31, 0x8a, 0x2a, 0x55, 0x55, 0x55, 0xa5, 0x92, 0x2a, 0xad, 0x59, 0xe7, 0x52, 0x8e, 0x48, 0x42, 0x44, 0x10, 0x00, 0x6a, 0x55, 0x55, 0x2a, 0xab, 0x54, 0xfd, 0xc9, 0xb7, 0x9c, 0xba, 0x15, 0x29, 0x91, 0xa2, 0x2a, 0x56, 0x55, 0x55, 0x55, 0x55, 0x55, 0x25, 0x99, 0xe7, 0x14, 0x10, 0x55, 0x44, 0x12, 0x04, 0x20, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x55, 0xf4, 0x68, 0x29, 0x45, 0x26, 0x29, 0x49, 0xa9, 0x02, 0x55, 0x5b, 0x55, 0x55, 0xa5, 0x54, 0xd5, 0xb0, 0xb2, 0x2a, 0x08, 0x4a, 0x02, 0x11, 0x01, 0x2a, 0x56, 0x55, 0x55, 0x55, 0xaa, 0xaa, 0x12, 0x82, 0xaa, 0x84, 0x40, 0x34, 0xa9, 0x44, 0xaa, 0x40, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x75, 0x88, 0x2a, 0x19, 0x09, 0x60, 0x12, 0x49, 0x00, 0x0a, 0xad, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x15, 0x22, 0x49, 0x22, 0xa0, 0x4a, 0x49, 0x24, 0x55, 0x11, 0xd5, 0x6a, 0x55, 0x55, 0x55, 0x52, 0x45, 0x00, 0x52, 0x55, 0x05, 0x90, 0x92, 0x24, 0x09, 0x22, 0xad, 0x56, 0x55, 0x55, 0x55, 0x55, 0x0b, 0x55, 0x95, 0x2a, 0x10, 0x49, 0x49, 0x42, 0xa4, 0x08, 0x5a, 0x55, 0x55, 0x55, 0x55, 0xa5, 0x21, 0x00, 0xa5, 0x67, 0x21, 0x40, 0x92, 0x94, 0x08, 0x22, 0xd5, 0x6a, 0xab, 0xaa, 0xaa, 0x4a, 0x82, 0x48, 0xfb, 0x2f, 0x84, 0x55, 0x25, 0x42, 0x52, 0x49, 0x55, 0xad, 0xaa, 0xaa, 0xaa, 0x5a, 0x14, 0x01, 0xa2, 0x2f, 0x08, 0x82, 0xaa, 0x94, 0x04, 0x09, 0xad, 0x55, 0x55, 0x55, 0x55, 0x05, 0x01, 0x14, 0xd5, 0x9b, 0x20, 0x2d, 0x19, 0x49, 0x52, 0x24, 0x5a, 0x55, 0x5b, 0x55, 0x55, 0x2d, 0xa6, 0x28, 0xa8, 0x8a, 0x0c, 0x10, 0x62, 0x49, 0x88, 0x04, 0x55, 0xab, 0xaa, 0xaa, 0x4a, 0x85, 0x41, 0x2a, 0x55, 0x06, 0xb2, 0x6a, 0x4a, 0x84, 0x12, 0x51, 0x6b, 0x6d, 0x55, 0x55, 0xd9, 0x81, 0x4a, 0x64, 0x4a, 0x2d, 0x2a, 0xc0, 0x8c, 0x29, 0x22, 0x0a, 0x56, 0x55, 0xb5, 0xaa, 0xfe, 0xd5, 0x30, 0x1e, 0x52, 0x88, 0x64, 0x2a, 0x51, 0x92, 0x94, 0x50, 0xad, 0x55, 0xab, 0xaa, 0xff, 0xc3, 0x72, 0x78, 0x7a, 0x88, 0xcb, 0x02, 0x27, 0x25, 0x21, 0x05, 0x5a, 0x6d, 0xd5, 0xaa, 0x7f, 0x55, 0x18, 0x86, 0x9f, 0x73, 0x3c, 0x29, 0xc4, 0x49, 0x4a, 0x28, 0x6b, 0xab, 0xaa, 0x2a, 0xff, 0xed, 0x51, 0x78, 0xb6, 0x40, 0xaf, 0x8a, 0x18, 0x97, 0x88, 0x22, 0x5a, 0x55, 0x5b, 0x6b, 0xfd, 0xbb, 0x06, 0xa9, 0x0f, 0xdd, 0xaf, 0x2a, 0xc4, 0x23, 0x25, 0x04, 0xaa, 0xb6, 0xaa, 0xaa, 0xdb, 0x6f, 0x2f, 0xf4, 0x7f, 0x53, 0x7d, 0x95, 0x10, 0xa6, 0x48, 0x29, 0xdb, 0x6a, 0x55, 0x55, 0xf2, 0xdf, 0x52, 0xff, 0x5f, 0x55, 0xff, 0x6a, 0xaa, 0x17, 0x25, 0x12, 0xb5, 0xaa, 0xb6, 0xd5, 0xa6, 0xff, 0x5f, 0x52, 0x7f, 0xd5, 0xff, 0x95, 0x50, 0xa6, 0x48, 0x22, 0xd5, 0xd6, 0xaa, 0x2a, 0x55, 0xed, 0xbb, 0xed, 0xff, 0xaf, 0xbf, 0x7f, 0xed, 0x0a, 0x25, 0x49, 0xad, 0x5a, 0x55, 0x6b, 0x55, 0x2b, 0x55, 0x55, 0xfb, 0xaf, 0xba, 0xdf, 0xa7, 0xad, 0x48, 0x12, 0xdb, 0xd6, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xf4, 0x57, 0xe5, 0xfc, 0x55, 0x27, 0x25, 0x49, 0xb5, 0x55, 0x55, 0xad, 0xad, 0xaa, 0xaa, 0xaa, 0x95, 0x54, 0x49, 0xa9, 0x57, 0x48, 0x4a, 0x12, 0x55, 0x6d, 0x6b, 0x55, 0x55, 0x55, 0x55, 0x55, 0xaa, 0x4a, 0x2a, 0x45, 0xff, 0xff, 0x27, 0x49, 0x6d, 0xab, 0x56, 0xab, 0x6a, 0x55, 0x55, 0x55, 0xa5, 0x52, 0xa5, 0x54, 0xc4, 0x11, 0x24, 0x11, 0x5b, 0x6d, 0xb5, 0x5a, 0x55, 0xab, 0xaa, 0xaa, 0x54, 0x2a, 0x49, 0x89, 0x2a, 0xca, 0x4a, 0x4a, 0xb5, 0xd5, 0xaa, 0x6a, 0xad, 0xaa, 0xaa, 0xa4, 0xaa, 0x4a, 0x95, 0xaa, 0xa2, 0x92, 0x90, 0x10, 0x6d, 0x5b, 0xdb, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x2a, 0x29, 0x4a, 0x24, 0x25, 0x25, 0x55, 0xb5, 0xaa, 0xad, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa9, 0x52, 0xa5, 0x54, 0xa5, 0x24, 0x49 }; vigor-0.016.orig/vigor/v2cp0002.xcf0100664000076400007640000017060607103707232015307 0ustar cjw44cjw44gimp xcf file€€BB_€€ Backgroundÿ     €€&ñz€€B:HvÕ³¡Ó¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËýÌÍÎÎýÐÏÑÑÓÔÖ¯°ï±²²³´´µµ¶··¸¹¹ºº»»þ½¾¾û¿ÀÀÁÂÂÄÅÆÇíÈÉÉÊËËÌÌÍÍÎÏÏÐÑÑÒÓÔÔꮯ¯°°±²²³´´µµ¶··¸¹¹ºº»»½¾û¿ÀÁÁÂÂîÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÐÑþÓÔÔå­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»»¼½¾¾ø¿ÀÀÁÁÂÂÄÄöÅÆÆÇÇÈÉÉÊËËýÌÍÎÎÐÑÌÒÔÔ­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÄÅÆÆÇÇÈÈÊËËýÌÍÎÎåÏÐÑÑÒÒÔ¬­­®¯¯°°±²²³´´µµ¶··¸¸º»è¼½½¾¾¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÇÈÈÊËËþÍÎÎþÏÑÑÒÑ«¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»»¼¼½¾¾¿ÀÁÁÂÁÂÃÄÄÅÅÆÇÈÈþÊËËþÌÎÎåÏÐÑÑË««¬­­®¯¯°°±²²³´´µµ¶··¸¸º»ø¼½½¾¾¿ÀÁÁÂóÃÄÄÅÅÇÇÈÈÉÉÊËËåÌÍÎÎÏÐÐÌWª««¬­­®¯¯°°±²²³´´µµ·¸º»¼ï½¾¾¿ÀÁÀÁÂÂÃÄÅÅÆÇÈÈýÉÊËËåÌÍλ?t1ªª««¬­­®¯¯°°±²²³´´µµ·¸º»¼ó½¾¾¿ÀÀÁÁÂÂÃÄÅÅÛÆÇÈÈÇÄÁ¨Š‰Šr3t.+©ªª««¬­­®¯¯°°±²²³´´µµ·¸º»è¼½½¾¾¿¿ÀÀÁÁÂÄÄÅÅÆÆȾ‡ˆˆ‰‰ä€IuOOz¨©ªª««¬­­®¯¯°°±²²³²´µµ·¸º»í¼½½¾¾¿¿ÀÀÁÂÂÄÄÅÅÁ‰‡‡àˆ‰‰cWtS|ª¦¨¨©ªª««¬­­®¯¯°°±²²³³´µµ·¸º»í¼½½¾¾¿¿ÀÁÁÂÂÃĪ‡††‡‡ä½¸KŠÅÍ稨©ªª««¬­­®¯¯°°±²²ý³´µµ·¸º»þ¼½½ö¾¿¿ÀÁÂÂþ……†á´ÃÇÉvJµc¡¼Éš¦§¨¨©ªª««¬­­®®¯°°±²²ý³´µµ·¸º»þ¼½½Ó¾¿¿À¡°¹\„……³Ãµ¾Ç¶X½Àk¿ˆ›s¦¦§¨¨©ªª««¬­­®®¯°°±²²´µ·¸º»¼Ò½¾“_UR0m­‹Y—šu^¾CgÅvSÆ¥¦¦§¨¨©ªª««¬­­®®¯°°±²²ý³´µµ·¸º»¼Ò¬ZCvhEghZ`C­^kKª•DvÇ\¿¾¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²þ´µµ·¸º»Ð¾_o¨±ˆ‚ƒƒ ?ƒTcµ|h¥NœVEeMG¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²ý³´µµ·¸ºÎ»]_¿½¦‚i”Ÿ†WŸ®w\e‡u‡H[O£¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²þ´µµ·¸ºÓ´?ž¨§\nKVV†Â¸£s¥±…ClŠ–¥Cš££¤¤¥¦¦§¨¨©©ª««¬­­®®Ã¯°°±±²²³´µµ¶··¸¹¹|ocC9 6Puœ´®zHf§Gv€®®R`‘¢££¤¤¥¦¦§¨¨©©ª««¬­­®ö¯°°±²²³³´µµÏ¶·¸µ?AaŠˆ~j(a…ol…¨¤ECžKvr­_… p¡¢££¤¤¥¦¦§¨¨©©ª««¬­­„®¯°°±²²³³´µµ¶¶·³A®ÅC?@h¼…EŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª«ª«¬­­®®¯°°±±²³³´µµ>Bz¹‚QŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªªÜ«¬­­®®¯¯°±±²³³´;D´¶©xr9<@OE=gTR=CE>>éC‘”KAžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ûª««¬­­æ®¯°°±±²³];£µ³Œ:<=HXŽW==>?žŸó ¡¡¢££¤¤¥¦¦§¨¨©àª««¬¬­®®¯¯°°±²<;µµ´t&‡ikLHcl^==>í?žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨öªžª«¬­­®®°°±ê<;´µ >UDh‹OE_wa<<=<==>ê1œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨õ©ªª««¬­­®®°° ï²:C;9 L(nO–O\ˆ\<<=è"œœžžŸŸ ¡¡¢££¤¤¥¦¦§§ô¨©ªª««¬­­®®°°î±:H¨c A"A;>;=LD<<ý3웜œžžŸŸ ¡¡¢££¤¤¥¦¦§§ç¨©ªª\¨¬­­®®°°<::hqW>9;;û@E=;<<ý8ëš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§ø¨©ªª««¬­­ñ®?:°¤RW@~4E;;üCSRí8šš›œœžžŸŸ ¡¡¢¢£¤¤ý¥¦§§ý¨©ªªì«¬­­A9­Ÿ:<\)+2]T@;;ã@}s 4==™šš›œœžžŸŸ ¡¡¢¢£¤¤¥§æ¨©ªª««¬C—­~;¡yDpP)::;:;;âUƤ€5$:<==™™šš›œœžžŸŸ ¡¡¢¢£¤¤ý¥¦§§ý¨©ªªîŸ`§­<À¯v1-/7H_=<::÷>oÜ­™5;<<ë=˜™™šš›œœžŸŸ ¡¡¢¢£¤¤ý¥¾§§¨ªîC ¬_«®ª91%Vg ?P::ö>tÁ«¥gYD<<î—˜™™šš›œœžŸŸ ¡¡¢¢¤ý¥¦§§÷¨A“a¢«¬Ÿ99÷1-::õO²ÝÞª©¶Ë|=<<—™šš›œœžŸŸ ¡¡¢¢¤ý¥¦§§ò¨Cª«?8[©92'Gý "99áYÎ䮪ª²¿g;<<–——˜™™šš›œœžŸŸ ¡¡þ¢¤¤ý¥¦§§íC›ªB8š8Kq37hd\0H99Û]̲ªª«¬¯©¼´Y<•–——˜˜™šš›œœžŸŸ ¾¡¡¢¢¤¤ï¥¦§§C¯E8£«:®{4N%ü$Q99þ[ªªã¿ÓãÀ­«ÀÆž••–——˜˜™šš›œœžŸŸ ¡¡¢¤É¥¦§§C7žª}9«ŸQ$ 094Sª´ûýþóõùÁÄʾ”••–——˜˜™šš›œœžŸŸ¡þ¢¤¤å¥¦§CU¡©<©—95E%3 )6&“Èöýýéôϻ㓔••–——˜˜™šš›œœžŸŸ¡¢Ã[Ÿ¤¥~>›§¨;¨7iSJ 9çýýþýýþýý÷â¼Þ““”••–——˜˜™šš›œœžžŸŸ¡¡¢¤Æ@6œ~¥:7I©[SBoðþýýþýþóÏ©´¦«’““”••–——˜˜™šš›œœžžŸŸ¡¡¢¤Å@6² <77©©ž„ ")TtÇþýü׿¯›f[r‘u’’““”••–——˜˜™šš›œœžžŸŸ¡¡¢ð¼B6Tw:7§—;H/`÷ES`œýýݪªè’HHSR ‘’’““”••–——˜˜™šš›œœüžžŸŸ¡ñ¢›£>66š7G£Svö(OSZ‰þ髫ת“LDUW.‘’’““”••–——˜˜™šš›œ›œšžŸŸ ¡¡¢¢¤>66Ñz¦xF8O[SSUx÷ç­ª««jZdL‘’’““”••–——˜˜™šš››œžŸë ¡¡¢¢¤<6™¥•66oC-SSúpùò°ª««ç±É¯F‘’’““”••–——˜˜™šš››æœžŸŸ Ÿ=³¤<56y6`¢•%ALSSÞkö÷µ«ª«©lXQ8Ž‘’’““”••–S—˜˜™šš››œžŸï|™¡cC ƒ&dNSSÞrñãàÏágUSQŽŽ‘’’““”••–——˜˜™™š››éœ5šžŸžž¡ul¨7,„p‡--d.KSSâsµãû¦_TSSH+ŽŽ‘’’““”••––—˜˜ý™š››ëžžŸ:˜t”¡65~whI YJSSýZWSSì8ŽŽ‘’’““”••––—˜˜ý™š››éœž:˜:™¡85»5^IŸ”C$V T|*,44XÀ̪ª}3556ˆ‰ñŠ‹‹ŒŒŽŽ‘‘’““•–˜á5–š˜7–73TŸ¨ŽI:@(<144P°½«ª~556Ó¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËýÌÍÎÎýÐÏÑÑÓÔÖ¯°ï±²²³´´µµ¶··¸¹¹ºº»»þ½¾¾û¿ÀÀÁÂÂÄÅÆÇíÈÉÉÊËËÌÌÍÍÎÏÏÐÑÑÒÓÔÔꮯ¯°°±²²³´´µµ¶··¸¹¹ºº»»½¾û¿ÀÁÁÂÂîÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÐÑþÓÔÔå­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»»¼½¾¾ø¿ÀÀÁÁÂÂÄÄöÅÆÆÇÇÈÉÉÊËËýÌÍÎÎÐÑÌÒÔÔ­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÄÅÆÆÇÇÈÈÊËËýÌÍÎÎåÏÐÑÑÒÒÔ¬­­®¯¯°°±²²³´´µµ¶··¸¸º»è¼½½¾¾¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÇÈÈÊËËþÍÎÎþÏÑÑÒÑ«¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»»¼¼½¾¾¿ÀÁÁÂÁÂÃÄÄÅÅÆÇÈÈþÊËËþÌÎÎåÏÐÑÑË««¬­­®¯¯°°±²²³´´µµ¶··¸¸º»ø¼½½¾¾¿ÀÁÁÂóÃÄÄÅÅÇÇÈÈÉÉÊËËåÌÍÎÎÏÐÐÌWª««¬­­®¯¯°°±²²³´´µµ·¸º»¼ï½¾¾¿ÀÁÀÁÂÂÃÄÅÅÆÇÈÈýÉÊËËåÌÍλ?t1ªª««¬­­®¯¯°°±²²³´´µµ·¸º»¼ó½¾¾¿ÀÀÁÁÂÂÃÄÅÅÛÆÇÈÈÇÄÁ¨Š‰Šr3t.+©ªª««¬­­®¯¯°°±²²³´´µµ·¸º»è¼½½¾¾¿¿ÀÀÁÁÂÄÄÅÅÆÆȾ‡ˆˆ‰‰ä€IuOOz¨©ªª««¬­­®¯¯°°±²²³²´µµ·¸º»í¼½½¾¾¿¿ÀÀÁÂÂÄÄÅÅÁ‰‡‡àˆ‰‰cWtS|ª¦¨¨©ªª««¬­­®¯¯°°±²²³³´µµ·¸º»í¼½½¾¾¿¿ÀÁÁÂÂÃĪ‡††‡‡ä½¸KŠÅÍ稨©ªª««¬­­®¯¯°°±²²ý³´µµ·¸º»þ¼½½ö¾¿¿ÀÁÂÂþ……†á´ÃÇÉvJµc¡¼Éš¦§¨¨©ªª««¬­­®®¯°°±²²ý³´µµ·¸º»þ¼½½Ó¾¿¿À¡°¹\„……³Ãµ¾Ç¶X½Àk¿ˆ›s¦¦§¨¨©ªª««¬­­®®¯°°±²²´µ·¸º»¼Ò½¾“_UR0m­‹Y—šu^¾CgÅvSÆ¥¦¦§¨¨©ªª««¬­­®®¯°°±²²ý³´µµ·¸º»¼Ò¬ZCvhEghZ`C­^kKª•DvÇ\¿¾¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²þ´µµ·¸º»Ð¾_o¨±ˆ‚ƒƒ ?ƒTcµ|h¥NœVEeMG¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²ý³´µµ·¸ºÎ»]_¿½¦‚i”Ÿ†WŸ®w\e‡u‡H[O£¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²þ´µµ·¸ºÓ´?ž¨§\nKVV†Â¸£s¥±…ClŠ–¥Cš££¤¤¥¦¦§¨¨©©ª««¬­­®®Ã¯°°±±²²³´µµ¶··¸¹¹|ocC9 6Puœ´®zHf§Gv€®®R`‘¢££¤¤¥¦¦§¨¨©©ª««¬­­®ö¯°°±²²³³´µµÏ¶·¸µ?AaŠˆ~j(a…ol…¨¤ECžKvr­_… p¡¢££¤¤¥¦¦§¨¨©©ª««¬­­„®¯°°±²²³³´µµ¶¶·³A®ÅC?@h¼…EŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª«ª«¬­­®®¯°°±±²³³´µµ>Bz¹‚QŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªªÜ«¬­­®®¯¯°±±²³³´;D´¶©xr9<@OE=gTR=CE>>éC‘”KAžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ûª««¬­­æ®¯°°±±²³];£µ³Œ:<=HXŽW==>?žŸó ¡¡¢££¤¤¥¦¦§¨¨©àª««¬¬­®®¯¯°°±²<;µµ´t&‡ikLHcl^==>í?žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨öªžª«¬­­®®°°±ê<;´µ >UDh‹OE_wa<<=<==>ê1œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨õ©ªª««¬­­®®°° ï²:C;9 L(nO–O\ˆ\<<=è"œœžžŸŸ ¡¡¢££¤¤¥¦¦§§ô¨©ªª««¬­­®®°°î±:H¨c A"A;>;=LD<<ý3웜œžžŸŸ ¡¡¢££¤¤¥¦¦§§ç¨©ªª\¨¬­­®®°°<::hqW>9;;û@E=;<<ý8ëš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§ø¨©ªª««¬­­ñ®?:°¤RW@~4E;;üCSRí8šš›œœžžŸŸ ¡¡¢¢£¤¤ý¥¦§§ý¨©ªªì«¬­­A9­Ÿ:<\)+2]T@;;ã@}s 4==™šš›œœžžŸŸ ¡¡¢¢£¤¤¥§æ¨©ªª««¬C—­~;¡yDpP)::;:;;âUƤ€5$:<==™™šš›œœžžŸŸ ¡¡¢¢£¤¤ý¥¦§§ý¨©ªªîŸ`§­<À¯v1-/7H_=<::÷>oÜ­™5;<<ë=˜™™šš›œœžŸŸ ¡¡¢¢£¤¤ý¥¾§§¨ªîC ¬_«®ª91%Vg ?P::ö>tÁ«¥gYD<<î—˜™™šš›œœžŸŸ ¡¡¢¢¤ý¥¦§§÷¨A“a¢«¬Ÿ99÷1-::õO²ÝÞª©¶Ë|=<<—™šš›œœžŸŸ ¡¡¢¢¤ý¥¦§§ò¨Cª«?8[©92'Gý "99áYÎ䮪ª²¿g;<<–——˜™™šš›œœžŸŸ ¡¡þ¢¤¤ý¥¦§§íC›ªB8š8Kq37hd\0H99Û]̲ªª«¬¯©¼´Y<•–——˜˜™šš›œœžŸŸ ¾¡¡¢¢¤¤ï¥¦§§C¯E8£«:®{4N%ü$Q99þ[ªªã¿ÓãÀ­«ÀÆž••–——˜˜™šš›œœžŸŸ ¡¡¢¤É¥¦§§C7žª}9«ŸQ$ 094Sª´ûýþóõùÁÄʾ”••–——˜˜™šš›œœžŸŸ¡þ¢¤¤å¥¦§CU¡©<©—95E%3 )6&“Èöýýéôϻ㓔••–——˜˜™šš›œœžŸŸ¡¢Ã[Ÿ¤¥~>›§¨;¨7iSJ 9çýýþýýþýý÷â¼Þ““”••–——˜˜™šš›œœžžŸŸ¡¡¢¤Æ@6œ~¥:7I©[SBoðþýýþýþóÏ©´¦«’““”••–——˜˜™šš›œœžžŸŸ¡¡¢¤Å@6² <77©©ž„ ")TtÇþýü׿¯›f[r‘u’’““”••–——˜˜™šš›œœžžŸŸ¡¡¢ð¼B6Tw:7§—;H/`÷ES`œýýݪªè’HHSR ‘’’““”••–——˜˜™šš›œœüžžŸŸ¡ñ¢›£>66š7G£Svö(OSZ‰þ髫ת“LDUW.‘’’““”••–——˜˜™šš›œ›œšžŸŸ ¡¡¢¢¤>66Ñz¦xF8O[SSUx÷ç­ª««jZdL‘’’““”••–——˜˜™šš››œžŸë ¡¡¢¢¤<6™¥•66oC-SSúpùò°ª««ç±É¯F‘’’““”••–——˜˜™šš››æœžŸŸ Ÿ=³¤<56y6`¢•%ALSSÞkö÷µ«ª«©lXQ8Ž‘’’““”••–S—˜˜™šš››œžŸï|™¡cC ƒ&dNSSÞrñãàÏágUSQŽŽ‘’’““”••–——˜˜™™š››éœ5šžŸžž¡ul¨7,„p‡--d.KSSâsµãû¦_TSSH+ŽŽ‘’’““”••––—˜˜ý™š››ëžžŸ:˜t”¡65~whI YJSSýZWSSì8ŽŽ‘’’““”••––—˜˜ý™š››éœž:˜:™¡85»5^IŸ”C$V T|*,44XÀ̪ª}3556ˆ‰ñŠ‹‹ŒŒŽŽ‘‘’““•–˜á5–š˜7–73TŸ¨ŽI:@(<144P°½«ª~556Ó¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËýÌÍÎÎýÐÏÑÑÓÔÖ¯°ï±²²³´´µµ¶··¸¹¹ºº»»þ½¾¾û¿ÀÀÁÂÂÄÅÆÇíÈÉÉÊËËÌÌÍÍÎÏÏÐÑÑÒÓÔÔꮯ¯°°±²²³´´µµ¶··¸¹¹ºº»»½¾û¿ÀÁÁÂÂîÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÐÑþÓÔÔå­®¯¯°°±²²³´´µµ¶··¸¹¹ºº»»¼½¾¾ø¿ÀÀÁÁÂÂÄÄöÅÆÆÇÇÈÉÉÊËËýÌÍÎÎÐÑÌÒÔÔ­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»»¼½½¾¾¿ÀÀÁÂÂÃÃÄÄÅÆÆÇÇÈÈÊËËýÌÍÎÎåÏÐÑÑÒÒÔ¬­­®¯¯°°±²²³´´µµ¶··¸¸º»è¼½½¾¾¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÇÈÈÊËËþÍÎÎþÏÑÑÒÑ«¬­­®¯¯°°±²²³´´µµ¶··¸¸¹ºº»»¼¼½¾¾¿ÀÁÁÂÁÂÃÄÄÅÅÆÇÈÈþÊËËþÌÎÎåÏÐÑÑË««¬­­®¯¯°°±²²³´´µµ¶··¸¸º»ø¼½½¾¾¿ÀÁÁÂóÃÄÄÅÅÇÇÈÈÉÉÊËËåÌÍÎÎÏÐÐÌWª««¬­­®¯¯°°±²²³´´µµ·¸º»¼ï½¾¾¿ÀÁÀÁÂÂÃÄÅÅÆÇÈÈýÉÊËËåÌÍλ?t1ªª««¬­­®¯¯°°±²²³´´µµ·¸º»¼ó½¾¾¿ÀÀÁÁÂÂÃÄÅÅÛÆÇÈÈÇÄÁ¨Š‰Šr3t.+©ªª««¬­­®¯¯°°±²²³´´µµ·¸º»è¼½½¾¾¿¿ÀÀÁÁÂÄÄÅÅÆÆȾ‡ˆˆ‰‰ä€IuOOz¨©ªª««¬­­®¯¯°°±²²³²´µµ·¸º»í¼½½¾¾¿¿ÀÀÁÂÂÄÄÅÅÁ‰‡‡àˆ‰‰cWtS|ª¦¨¨©ªª««¬­­®¯¯°°±²²³³´µµ·¸º»í¼½½¾¾¿¿ÀÁÁÂÂÃĪ‡††‡‡ä½¸KŠÅÍ稨©ªª««¬­­®¯¯°°±²²ý³´µµ·¸º»þ¼½½ö¾¿¿ÀÁÂÂþ……†á´ÃÇÉvJµc¡¼Éš¦§¨¨©ªª««¬­­®®¯°°±²²ý³´µµ·¸º»þ¼½½Ó¾¿¿À¡°¹\„……³Ãµ¾Ç¶X½Àk¿ˆ›s¦¦§¨¨©ªª««¬­­®®¯°°±²²´µ·¸º»¼Ò½¾“_UR0m­‹Y—šu^¾CgÅvSÆ¥¦¦§¨¨©ªª««¬­­®®¯°°±²²ý³´µµ·¸º»¼Ò¬ZCvhEghZ`C­^kKª•DvÇ\¿¾¥¥¦¦§¨¨©©ª««¬­­®®¯°°±²²þ´µµ·¸º»Ð¾_o¨±ˆ‚ƒƒ ?ƒTcµ|h¥NœVEeMG¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²ý³´µµ·¸ºÎ»]_¿½¦‚i”Ÿ†WŸ®w\e‡u‡H[O£¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯°±²²þ´µµ·¸ºÓ´?ž¨§\nKVV†Â¸£s¥±…ClŠ–¥Cš££¤¤¥¦¦§¨¨©©ª««¬­­®®Ã¯°°±±²²³´µµ¶··¸¹¹|ocC9 6Puœ´®zHf§Gv€®®R`‘¢££¤¤¥¦¦§¨¨©©ª««¬­­®ö¯°°±²²³³´µµÏ¶·¸µ?AaŠˆ~j(a…ol…¨¤ECžKvr­_… p¡¢££¤¤¥¦¦§¨¨©©ª««¬­­„®¯°°±²²³³´µµ¶¶·³A®ÅC?@h¼…EŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª«ª«¬­­®®¯°°±±²³³´µµ>Bz¹‚QŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªªÜ«¬­­®®¯¯°±±²³³´;D´¶©xr9<@OE=gTR=CE>>éC‘”KAžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ûª««¬­­æ®¯°°±±²³];£µ³Œ:<=HXŽW==>?žŸó ¡¡¢££¤¤¥¦¦§¨¨©àª««¬¬­®®¯¯°°±²<;µµ´t&‡ikLHcl^==>í?žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨öªžª«¬­­®®°°±ê<;´µ >UDh‹OE_wa<<=<==>ê1œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨õ©ªª««¬­­®®°° ï²:C;9 L(nO–O\ˆ\<<=è"œœžžŸŸ ¡¡¢££¤¤¥¦¦§§ô¨©ªª««¬­­®®°°î±:H¨c A"A;>;=LD<<ý3웜œžžŸŸ ¡¡¢££¤¤¥¦¦§§ç¨©ªª\¨¬­­®®°°<::hqW>9;;û@E=;<<ý8ëš›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§ø¨©ªª««¬­­ñ®?:°¤RW@~4E;;üCSRí8šš›œœžžŸŸ ¡¡¢¢£¤¤ý¥¦§§ý¨©ªªì«¬­­A9­Ÿ:<\)+2]T@;;ã@}s 4==™šš›œœžžŸŸ ¡¡¢¢£¤¤¥§æ¨©ªª««¬C—­~;¡yDpP)::;:;;âUƤ€5$:<==™™šš›œœžžŸŸ ¡¡¢¢£¤¤ý¥¦§§ý¨©ªªîŸ`§­<À¯v1-/7H_=<::÷>oÜ­™5;<<ë=˜™™šš›œœžŸŸ ¡¡¢¢£¤¤ý¥¾§§¨ªîC ¬_«®ª91%Vg ?P::ö>tÁ«¥gYD<<î—˜™™šš›œœžŸŸ ¡¡¢¢¤ý¥¦§§÷¨A“a¢«¬Ÿ99÷1-::õO²ÝÞª©¶Ë|=<<—™šš›œœžŸŸ ¡¡¢¢¤ý¥¦§§ò¨Cª«?8[©92'Gý "99áYÎ䮪ª²¿g;<<–——˜™™šš›œœžŸŸ ¡¡þ¢¤¤ý¥¦§§íC›ªB8š8Kq37hd\0H99Û]̲ªª«¬¯©¼´Y<•–——˜˜™šš›œœžŸŸ ¾¡¡¢¢¤¤ï¥¦§§C¯E8£«:®{4N%ü$Q99þ[ªªã¿ÓãÀ­«ÀÆž••–——˜˜™šš›œœžŸŸ ¡¡¢¤É¥¦§§C7žª}9«ŸQ$ 094Sª´ûýþóõùÁÄʾ”••–——˜˜™šš›œœžŸŸ¡þ¢¤¤å¥¦§CU¡©<©—95E%3 )6&“Èöýýéôϻ㓔••–——˜˜™šš›œœžŸŸ¡¢Ã[Ÿ¤¥~>›§¨;¨7iSJ 9çýýþýýþýý÷â¼Þ““”••–——˜˜™šš›œœžžŸŸ¡¡¢¤Æ@6œ~¥:7I©[SBoðþýýþýþóÏ©´¦«’““”••–——˜˜™šš›œœžžŸŸ¡¡¢¤Å@6² <77©©ž„ ")TtÇþýü׿¯›f[r‘u’’““”••–——˜˜™šš›œœžžŸŸ¡¡¢ð¼B6Tw:7§—;H/`÷ES`œýýݪªè’HHSR ‘’’““”••–——˜˜™šš›œœüžžŸŸ¡ñ¢›£>66š7G£Svö(OSZ‰þ髫ת“LDUW.‘’’““”••–——˜˜™šš›œ›œšžŸŸ ¡¡¢¢¤>66Ñz¦xF8O[SSUx÷ç­ª««jZdL‘’’““”••–——˜˜™šš››œžŸë ¡¡¢¢¤<6™¥•66oC-SSúpùò°ª««ç±É¯F‘’’““”••–——˜˜™šš››æœžŸŸ Ÿ=³¤<56y6`¢•%ALSSÞkö÷µ«ª«©lXQ8Ž‘’’““”••–S—˜˜™šš››œžŸï|™¡cC ƒ&dNSSÞrñãàÏágUSQŽŽ‘’’““”••–——˜˜™™š››éœ5šžŸžž¡ul¨7,„p‡--d.KSSâsµãû¦_TSSH+ŽŽ‘’’““”••––—˜˜ý™š››ëžžŸ:˜t”¡65~whI YJSSýZWSSì8ŽŽ‘’’““”••––—˜˜ý™š››éœž:˜:™¡85»5^IŸ”C$V T|*,44XÀ̪ª}3556ˆ‰ñŠ‹‹ŒŒŽŽ‘‘’““•–˜á5–š˜7–73TŸ¨ŽI:@(<144P°½«ª~556*þüýþýþ5þþýþþýþþýýþýþþýþþþýþþýþþýþþýýþýýþýþýüþýýþþûýþýýþ#þýþûýþýýþþøýþýýþþýþþþýþþýþýþþýýþýþýþþýýþþýýýþýþþþýþþúýþþýþýýþþýýþýüþýýþþüýþýþþý þýþþýýþþýþþüýþþýýýþýþþýþþýþþüýþþýýþöýþþýþþýýþýýþþýþþüýþýþþþýþþýüþýþýýùþýþýþþýýþþýýþþýþþûýþþýþþýþýþ÷ýþþýýþþýþþüýþýþ þýýþýýþüýþýþþúýþþýýþþýþùýþþýþþýýýþýþþûýþþýþþýýþýýþýüþýþýýþþýþþüýþýþþþýþþýûþýþýþþýþýúþýýþþýýüþýýþþþýþ þýþþýýþýûþýýþýýýþýþþþýþþþýþþþýþþýþþýþþýþþýýýþýþþüýþýþ þýþýþýþþýýþýþþýþþþýþþýþýúþýþþýþþýúþýþýýþþýþûýþþýþþýúþýþýýþþþýþþþýþþþýþ þþýþþþýþþý÷þýýþýýþýþþý þûýþýþýýþýþþýýþþýýþþýþþýüþýýþþþýþþýþýþýþýþýþþýþ þþýþ þýþþýþþýþýþþýþþþýþ þýüþýýþþýýþýþþþýþþúýþþýþýýùþýþýþþýýþþýþþýýþýýþýþýþýþþýþþüýþýþþþýþþýùþýþýþþýýýþýþþý%þýþþýýþýýþýýþýþþýþþýþþýýþþýýþþýþþýþýþûýþýýþþýþýþþýýþþýýüþýýþþýþþýþþýüþýýþþùýþþýþþýýþýþþýþ þüýþýþþýüþýþýýûþýþýþþþýþþ÷ýþþýýþýýþþûýþýþýýõþýýþþýýþýýþþþýþþþýþþüýþþýýþþýýþýþþýþþýþüýþýþþþýþþýýþýýþþýýþüýþýþþþýþþüýþýþþýþýþûýþþýþþýþüýþýþþþýþþüýþýþþýýþýýþùýþýýþýþþúýþýþþýýþþýþþúýþýþþýýúþýýþþýýþþýýþþýþþþýþþýþýýþýý÷üýþýþþýþýýþýþý$þýõþýýþþýþþýýþþýýüýýüþýýþ þýþýþýþüýþþýýþþýþþþýþ þýþþýýþýþþýýþýþþýþþýþþýýþýþûýþýýþþþýþþûýþþýþþþýþþ ýþþýýüþýýþþýýþýýþýøþýþýþýþýýþþýýþýþþýýüþýýþþþýþþýþþýþþóýþýýþýþýþþýþýýøþýýþýýþýýþýþþýþþýñþýýþþýþýýþýýþýþþþýþþþýþþþýþþýøþýýþþýþýýþþýýþþýþþûýþþýþþýýþýýþýþþýþþþýþþýþúýþþýýþþýþþýþþþýþþýùþýþýýþýýþþýýþýþþýþþþýþþýþýþþýýþýþûýüþýþþþýþþùýþýýþþýýþýþýýþýýýþýþþýþüýþþýýþþýýþýúþýþýþýýþýþýþýþûýþýþýýýþýþþúýþýþþýýþý÷þýýþýþýýþþþýþþýúþýþýþýýþüýþþýýþýõþýþýýþýþþýþþþýþþýýþýýþýþýüþýýþþýþûýþþýþþýþþýþþýþþýýþýþþýþþûýþýýþþýþ÷ýþþýýþýþýýþýþþýýþýúþýýþþýýüþýþýýþýþýþþýþþýþþýýþþý ýþþýýþüýþþýýþþýþþúýþýýþýýùþýþþýýþþ ýþýþþýþþýûþýýþýýøþýýþýþýþþýþþýýúþýýþþýýþýþýþýþþýýûþýýþýýþýþýüþýýþþþýþþýþùýþþýýþýýüþýþýýþþýýþþýýþýþý×ÙÚþÜÝÝþßààâãåæôèçèéêëëììíîïïýðñòòôõðö÷÷øùùúúûüüýýùÖ××ÙÚþÜÝÝßàýáâããýäåææçÛèéêêëëìííîïïððñòòôôõõö÷÷øùùúúûüüýùÕÖ××ÙÚþÛÝÝþÞààýáâããûäåææççÍèéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüüùÔÕÕÖ××ØÙÙÚÛÛÜÜÝÞÞààýáâããýäåææóçèèéêêëëìííîïïåðñòóôôõõö÷÷øùùúúûüùÔÔÕÕÖ×ØÙÙÛÜÞùÝÞÝÐØáããþäååÖçèèéêêëëìííîïïððòòóôôõõö÷÷øøùúúûùÑÅ»ÁÒÖÖØÙÙþÛÜÜóÝÖÐÇ®«ŠtÀãäååÔæçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúúù¼~HhÀÖÖ××ØÙÙ°‘_bd~¬—y}¸j—Åãääåææçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúùEnЈI½ÖÖ×Øاbƒ›£·ÁÈßß๥i˜ãää倻æçèèéêêëëìííîïððñòòóóôõõö÷÷øøùù|”­¤UVbs¡×‹T™ÇÙÛÛÜÝÝßßÜÒ¼_¦âãääååææçèèééêëëìííîïððñòòóóôõõö÷÷øøù{4*I\X†‚qJŽÏÙÚÛÚÖDZ­ÑÞÞ­Y¯áââãäååææçèèéêêëëìííïïððñòòóóôõõö÷÷øù`*&Vgj‰P"~¬ÊÏÎÌ›I…ËÝÝÕX¶ááüâãäååÇæçèèéêêëëìíîîïððñòòóóôõõö÷÷ùogM–‚H!4”O5vÒÛÛ×ÒÍY¹àáá〼äååææçèèééêëëìíîîïððñòòóóôõõö÷ù¨Ï®n¨ƒRTƒ‘‹S1c›ºÑÙ×Ú cÉßàááâããäååææçèèééêëëííîîïððñòòóóôõõöù¥¾šVEROCEÌÌ¿Œ3d”•ÚÛÅUuÔÞßßàááâããäååææçèèééêëìííîîïððñòòóóôõõùºmV•Y̶XUaÔÓ¹—jx“””˜ªšdR€ÅÜßßá€<âããäååææçèèééêëìííîîïððñòòóóôõù—JªLPÏ}˜«i”Áym‰Ÿ^O.OGM\dSkØÞßàááâããäååææçèèééëëìííîîïððñòòóóôùK¡^B¬£[oŒ™kitqXJP<+_GHJJPÚÞßàááâããäååææççèéêëëìííîîïððñòòóóùvAR`–^x¶uG”ÐÈPDD-P[HH£Í½NIIØààááâããääåææçèèéêëëìííîîïððñòòóùkbAA›a\spQe¼ÅÌŇENA@x_~œhÈØÛÕLIjÙßàááâããääåæççèééêëëìííîîïððñòòùMEqa™CTKNTDCEaCDj´[%T^bÁÚÛÜÜÕÝÞßààááâããääåæççèééêëëìííîîïððñòù@UUŸp|a^SBBCýEHDDËFF_¹ÚÚÛØÛÏÞßßàááâããääåæçèèééêëëìííîîïððñù@@a™i›QRBB‡‰PCŽ·¾kJS,z%CZ“®ÚÑHHIJÙÞßßàááâããääåæçèèééêëëìííîîïððù@@]€U|yAITLHƒ¹Î¼·kDBE SeÏeLÛÙL‹ÜÞßßàááâããääåæçèèééêëëìííîîïðùDWPAA¦µAB]}~~[Y”>7Xh[P\GJÏÚÚ®KÛÞÞßßàááâããääææçèèééêëëìííîîïùe¢‰LA]BSGADIFUJGI\¬\|QO]wFFIÖGHHIIßÝÞßßàááâããäåææçèèééêëëììíîîùo¦|H@@ÃUCQA[LNBBCdQBU=Ñ›\FGGÏØH‹ÚHHÞÞßßàááâããäåææçèèééêëëììíîùT_I@@øFDIIR]DBBCí=QϯŽGÖGØØG®ÛÛHÞÞßáìâãääåææçèèééêëëììíù??@ABéUBCCSXI4U”NRFFIÔIÚÛÙJÜÞÞßáýâãääýåæçç÷èéêêëëìù??@ABçPhBCV§@O,cPÁFFG[ØØÄYÛÜÞÞßáýâãääåçøèéêêëëùþ%@@ABßHjcA™ªV\–]FHpµ`nÛÒ²ÓÞÞßßàááâãääýåæççùèéêêëùø ?@@AAÙlWBCB{y%_dmWYFˆ“HHÔÙ®rÜÝÞÞßßàááâãääýåæççúèéêêùÖ *@@AHEABb`•G2 ESIGEGŸÓzI™ØÚÚÛÛÜÝÞÞßßááâäýåæççøèéê­û >@AAÞ^b“H<  DƒªkE’ÍdJJx¿ÙÚÚÛÜÜÂYÞßßááâäýåæççËèéù<>=—MAAGIKBY|N\Ѽ]L½RLÄ”T¹ØÙÙÚÛÛÜÝÝÞßßááâäýåæççüèù=>>õ: Lq‰c@AAÞG·m& 6TZ¢nGREEÒÖÑVƒÍÙÙÚÚÛÜÜÝÞÞßßááâäýåæççüù==>>ö<, \¤ÅšDAAÝM:njoVIDDEMÓÔÓ©NÏØÙÙÚÚÛÜÜÝÞÞßßááâäøåæççù==>>õ?37’±áÃZ@AAÝID\h"U±|Œw Dk¹ÔÔÁNÕ×ØØÙÙÚÛÛÜÝÞÞßßááâøãääåæçù==>àß`Ž›©®×êêÇDAK9(AqÌÏÁ¢XE¼ÓÎwÕ××ó¹vzÚÛÛÜÝÞÞßßááâäüåù<==ÜAvž¸§ª´ÂË×ÒS?>'80Z¾¯ÉJFÅÄÊ`¯ÔÖ××ûÖ––ÙÛÛùÜÝÞÞßßááâäÖù<<=Ef¦žªª««ªª´Çr=)hC >D‚~JCEISÃSÅÔÔÖ××Øý¿oÛÛùÜÝÞÞßßááâäÙùHAQm¥¬®öõñì¿«©d%K &4œfU¡¬gšr¦TÐÔÔÖ×ØýÙÚÛÛùÜÝÞÞßßááâöäù§ ¦ÃÌ®âýýÐúîÞ¿¢IM>47»•É‹uT^|ÒÒÆÑÔÖÖ××ØØÙÙÛÛÜÜÝÞÞßßááâ÷ùåæçä«ÕþýýûúéÁsØ@*'6ºq}É£[K›ÄÑÂb·ÔÔÕÖ××ØØÙÙÛÛÜÜÝÞÞßßááØâùæááÔ¹þýæÞáãóþýþôÃ.;_ 8¥Hi½z³K]ÅÐÑÒÒÔÁÕÖ××ØØÙÚÛÛÜÜÝÞÞßßàááùÏ°±´×þã°ªª²Íóýþþô465Cdn¸nBRžÏÐÐÑÒÒÓÔÔüÕÖ×ØØÎÙÚÛÛÜÜÝÞÞßßàáùš AšôΪª««³àýþþøL! :GBpPGœÎÏÐÐþÑÒÒúÔÕÕÖ×ØØßÙÚÛÛÜÜÝÞÞßßàùTh;œëÅ««ª«·ìýþýïX'ñ# "‚E`QAËÍÍÎÏÐÐõÑϽµÒÔÕÕÖ×ØØýÙÚÛÛñÜÝÞÞßßù‡T!œæÀªªé«·ôýþþæeQ7 ,b:}wEFÁÌÍÍðÎÏÏÐÐÑÑÒÓÓÔÕÕÖ×ØØýÙÚÛÛÆÜÝÞÞßù7Xh[P\GJÏÚÚ®KÛÞÞßßàááâããääææçèèééêëëìííîîïùe¢‰LA]BSGADIFUJGI\¬\|QO]wFFIÖGHHIIßÝÞßßàááâããäåææçèèééêëëììíîîùo¦|H@@ÃUCQA[LNBBCdQBU=Ñ›\FGGÏØH‹ÚHHÞÞßßàááâããäåææçèèééêëëììíîùT_I@@øFDIIR]DBBCí=QϯŽGÖGØØG®ÛÛHÞÞßáìâãääåææçèèééêëëììíù??@ABéUBCCSXI4U”NRFFIÔIÚÛÙJÜÞÞßáýâãääýåæçç÷èéêêëëìù??@ABçPhBCV§@O,cPÁFFG[ØØÄYÛÜÞÞßáýâãääåçøèéêêëëùþ%@@ABßHjcA™ªV\–]FHpµ`nÛÒ²ÓÞÞßßàááâãääýåæççùèéêêëùø ?@@AAÙlWBCB{y%_dmWYFˆ“HHÔÙ®rÜÝÞÞßßàááâãääýåæççúèéêêùÖ *@@AHEABb`•G2 ESIGEGŸÓzI™ØÚÚÛÛÜÝÞÞßßááâäýåæççøèéê­û >@AAÞ^b“H<  DƒªkE’ÍdJJx¿ÙÚÚÛÜÜÂYÞßßááâäýåæççËèéù<>=—MAAGIKBY|N\Ѽ]L½RLÄ”T¹ØÙÙÚÛÛÜÝÝÞßßááâäýåæççüèù=>>õ: Lq‰c@AAÞG·m& 6TZ¢nGREEÒÖÑVƒÍÙÙÚÚÛÜÜÝÞÞßßááâäýåæççüù==>>ö<, \¤ÅšDAAÝM:njoVIDDEMÓÔÓ©NÏØÙÙÚÚÛÜÜÝÞÞßßááâäøåæççù==>>õ?37’±áÃZ@AAÝID\h"U±|Œw Dk¹ÔÔÁNÕ×ØØÙÙÚÛÛÜÝÞÞßßááâøãääåæçù==>àß`Ž›©®×êêÇDAK9(AqÌÏÁ¢XE¼ÓÎwÕ××ó¹vzÚÛÛÜÝÞÞßßááâäüåù<==ÜAvž¸§ª´ÂË×ÒS?>'80Z¾¯ÉJFÅÄÊ`¯ÔÖ××ûÖ––ÙÛÛùÜÝÞÞßßááâäÖù<<=Ef¦žªª««ªª´Çr=)hC >D‚~JCEISÃSÅÔÔÖ××Øý¿oÛÛùÜÝÞÞßßááâäÙùHAQm¥¬®öõñì¿«©d%K &4œfU¡¬gšr¦TÐÔÔÖ×ØýÙÚÛÛùÜÝÞÞßßááâöäù§ ¦ÃÌ®âýýÐúîÞ¿¢IM>47»•É‹uT^|ÒÒÆÑÔÖÖ××ØØÙÙÛÛÜÜÝÞÞßßááâ÷ùåæçä«ÕþýýûúéÁsØ@*'6ºq}É£[K›ÄÑÂb·ÔÔÕÖ××ØØÙÙÛÛÜÜÝÞÞßßááØâùæááÔ¹þýæÞáãóþýþôÃ.;_ 8¥Hi½z³K]ÅÐÑÒÒÔÁÕÖ××ØØÙÚÛÛÜÜÝÞÞßßàááùÏ°±´×þã°ªª²Íóýþþô465Cdn¸nBRžÏÐÐÑÒÒÓÔÔüÕÖ×ØØÎÙÚÛÛÜÜÝÞÞßßàáùš AšôΪª««³àýþþøL! :GBpPGœÎÏÐÐþÑÒÒúÔÕÕÖ×ØØßÙÚÛÛÜÜÝÞÞßßàùTh;œëÅ««ª«·ìýþýïX'ñ# "‚E`QAËÍÍÎÏÐÐõÑϽµÒÔÕÕÖ×ØØýÙÚÛÛñÜÝÞÞßßù‡T!œæÀªªé«·ôýþþæeQ7 ,b:}wEFÁÌÍÍðÎÏÏÐÐÑÑÒÓÓÔÕÕÖ×ØØýÙÚÛÛÆÜÝÞÞßù7Xh[P\GJÏÚÚ®KÛÞÞßßàááâããääææçèèééêëëìííîîïùe¢‰LA]BSGADIFUJGI\¬\|QO]wFFIÖGHHIIßÝÞßßàááâããäåææçèèééêëëììíîîùo¦|H@@ÃUCQA[LNBBCdQBU=Ñ›\FGGÏØH‹ÚHHÞÞßßàááâããäåææçèèééêëëììíîùT_I@@øFDIIR]DBBCí=QϯŽGÖGØØG®ÛÛHÞÞßáìâãääåææçèèééêëëììíù??@ABéUBCCSXI4U”NRFFIÔIÚÛÙJÜÞÞßáýâãääýåæçç÷èéêêëëìù??@ABçPhBCV§@O,cPÁFFG[ØØÄYÛÜÞÞßáýâãääåçøèéêêëëùþ%@@ABßHjcA™ªV\–]FHpµ`nÛÒ²ÓÞÞßßàááâãääýåæççùèéêêëùø ?@@AAÙlWBCB{y%_dmWYFˆ“HHÔÙ®rÜÝÞÞßßàááâãääýåæççúèéêêùÖ *@@AHEABb`•G2 ESIGEGŸÓzI™ØÚÚÛÛÜÝÞÞßßááâäýåæççøèéê­û >@AAÞ^b“H<  DƒªkE’ÍdJJx¿ÙÚÚÛÜÜÂYÞßßááâäýåæççËèéù<>=—MAAGIKBY|N\Ѽ]L½RLÄ”T¹ØÙÙÚÛÛÜÝÝÞßßááâäýåæççüèù=>>õ: Lq‰c@AAÞG·m& 6TZ¢nGREEÒÖÑVƒÍÙÙÚÚÛÜÜÝÞÞßßááâäýåæççüù==>>ö<, \¤ÅšDAAÝM:njoVIDDEMÓÔÓ©NÏØÙÙÚÚÛÜÜÝÞÞßßááâäøåæççù==>>õ?37’±áÃZ@AAÝID\h"U±|Œw Dk¹ÔÔÁNÕ×ØØÙÙÚÛÛÜÝÞÞßßááâøãääåæçù==>àß`Ž›©®×êêÇDAK9(AqÌÏÁ¢XE¼ÓÎwÕ××ó¹vzÚÛÛÜÝÞÞßßááâäüåù<==ÜAvž¸§ª´ÂË×ÒS?>'80Z¾¯ÉJFÅÄÊ`¯ÔÖ××ûÖ––ÙÛÛùÜÝÞÞßßááâäÖù<<=Ef¦žªª««ªª´Çr=)hC >D‚~JCEISÃSÅÔÔÖ××Øý¿oÛÛùÜÝÞÞßßááâäÙùHAQm¥¬®öõñì¿«©d%K &4œfU¡¬gšr¦TÐÔÔÖ×ØýÙÚÛÛùÜÝÞÞßßááâöäù§ ¦ÃÌ®âýýÐúîÞ¿¢IM>47»•É‹uT^|ÒÒÆÑÔÖÖ××ØØÙÙÛÛÜÜÝÞÞßßááâ÷ùåæçä«ÕþýýûúéÁsØ@*'6ºq}É£[K›ÄÑÂb·ÔÔÕÖ××ØØÙÙÛÛÜÜÝÞÞßßááØâùæááÔ¹þýæÞáãóþýþôÃ.;_ 8¥Hi½z³K]ÅÐÑÒÒÔÁÕÖ××ØØÙÚÛÛÜÜÝÞÞßßàááùÏ°±´×þã°ªª²Íóýþþô465Cdn¸nBRžÏÐÐÑÒÒÓÔÔüÕÖ×ØØÎÙÚÛÛÜÜÝÞÞßßàáùš AšôΪª««³àýþþøL! :GBpPGœÎÏÐÐþÑÒÒúÔÕÕÖ×ØØßÙÚÛÛÜÜÝÞÞßßàùTh;œëÅ««ª«·ìýþýïX'ñ# "‚E`QAËÍÍÎÏÐÐõÑϽµÒÔÕÕÖ×ØØýÙÚÛÛñÜÝÞÞßßù‡T!œæÀªªé«·ôýþþæeQ7 ,b:}wEFÁÌÍÍðÎÏÏÐÐÑÑÒÓÓÔÕÕÖ×ØØýÙÚÛÛÆÜÝÞÞßùÚÝÝþ~ñ€‚ƒƒ„„…††‡‡ˆ‰‰ŠŒýŽæ‘’’““‘6^w^?!&!7F2I /22ø7…ÉØÛ}}û€‚ƒƒù„…††‡‡‰‰Šó‹ŒŒŽŽ‘‘’““í‹D‹_B ^zGB&L-/1223}Í€‚ƒƒ„„…††‡ˆˆ‰‰ŠŠ‹ŒŒŽŽ’““ŒR6M;i„MBzPD1223|}€ƒ„Õ…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽ‹ty‘’’“Š_[‹Y=qfKK11223|}ü€‚ƒƒð„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽé‘‘””i3AA0FL6MZ$1123þ{||}€ë‚ƒƒ„„…†…‡‡ˆˆ‰ŠŠ‹‹ŒŽŽê‘˜ |9M200-)11÷292233zz||þ}€ƒ„…‡ˆø‰ŠŠ‹‹ŒŽŽâ‰…^c‘N&EŒ00  G=117=2N73zzú{||}}€ù‚ƒƒ„„……‡ˆÐ‰ŠŠ‹‹Œˆ_mcj‡‰^4Ey52]ˆd1122BI62yyzz{||}}€ù‚ƒƒ„„……Û†‡ˆˆ‰ŠŠ‹‹ŒŽ†]?xo0 CS00MoŽ;14922õxyyzz{||}}ü€‚ƒƒ×„……|ˆˆ‰ŠŠ‹‹ŒŽ”–j?LlB11^6;122xyzú{||}}€ù‚ƒ‚„„……‡ˆŠ‹ÕŒ‰x€hSC- 7’š e`9}31B23L?:vvwxyyzz{||}}ü*€‚‚„…‡ˆŠ‹ãŒ•/ 6u 9+!?0115N}8224vvøwxyyzz{||þ}ü€‚‚ýƒ„……‡ˆþ‰‹‹ìŒŽ‡tacJA^7~K$@8>11ù^=ag:uvvûwxyyzz|}€þ‚‚ýƒ„……‡ˆ‰‹ý‰x``êp|jpe/$xzKgF9t¦j§¦tuuvvôwxyyzz{||}}€þ‚‚ýƒ„……ù†ˆ{‰‰‹‹üŠ~``éj‘€R]40’df«f˜³”ttuvvûwxyyzz|}û~€€‚‚ôƒ„……†kkˆ‰Š‹‹ãŒ‚_`an‘”om#hoŒ??¥¦pŠupssttvvôwxyyzz{||}}~~€þ‚‚ú„……††ˆˆ‰‹è†__bv„a]LKTPK8K»«`Jssýtuvvôwxyyzz{||}}~~€þ‚‚þƒ……†à‡ˆˆ‰‰‹‹‰`_`wŽ}aa|}…yµ¿¸Cd£Srssýtuvvôwxyyzz{||}}~~€þ‚‚þƒ……†à‡ˆˆ‰‰‹ˆa^_tŽŽ~`a}‘’b–»¿·Ž1=Qqqsstvôwxxyyz{||}}~~€þ‚‚þƒ……†ˆæ‰Š…}_f‰l`hŒ{‹½¿À¿¤h›†qqsýtuvvýwxyyzý|{}}~€þ‚‚øƒ„……††‡ˆˆßŠarŒˆe`g„i©¿¾¾À¸½¸“ppqqrssttvvýwxyyþz{{}~ý‚‚ùƒ„……††ˆˆñ‰~nz‹Œˆa_k‡U¬¿¿Àü¿½¦ppqstvýwxyyþz{{ý|}~~ý‚‚ùƒ„…††‡ˆˆþ‰ŠŠöŒ~^^Jh˜§¾¿¿ù¾ÀÀ¾¶oppqstvwyz{}~þ‚‚ùƒ„……†‡ˆˆ‰ŠølCK¤´½¿¿¾¿ü¼nnppqstvýwxyyþz{{}~þ‚‚ýƒ„……솇ˆˆŠ“i]Mƒ–½½¾½¿¿¾¿¿Àþ¾nnpqstvþwxxz{ø|}~~€‚‚ýƒ„……ñ‡†ˆ©•§ŽŸµ½¾¾¿¿ôÀµmmnnoppqqssþtvvþwxxýyz{{ò|}~~€‚‚ƒ„„……ñhy²¼¼«ŽŽ”«´¼¾¾¿¿þlmmùnoppqqsstvþwxxz{þ|~~þ€‚‚⃄……pˆ¯¹¼º«d5¤¯º½¾½¾¿»q½¾llmmùnoppqqsstûuvwwxxùyz{{||~~þ€‚‚ƒä>jº»»¼ (§½½¾…¸¿»œ}|£¾kklmmðnoppqqrssttvvwwxxýyz{{Ø|}~‹˜wMFt¤º»¼¸¨mv’¯½¾¥€¶¾²…•Šd½jjklmmùnoppqqsstûvuwwxxýyz{{Ý|†•fbjc:*=µ¾º¹º»†^Ž³½lP©½¼¨ck‰®¾jjôklmmnnoppqqssþtuuývwxxÙy{}siO)+)).6Nˆ ¹ºº¯…&MŽ•“°b/¡¾¼sBHF¾ijjôklmmnnoppqqssþtuuwxØy{}L,()-)+1.0))./@EM[H‚e/J{MlH;9^‹•´¹º´tvr`MgghhjjkmnöoppqqsrstuuØvwxx|ŠU><,)115:7A5*D{yOR9I`hŽ–›b`A50ggýhijjõklmmnnoppqrrýstuuØvwxxnOgqG=2,0+)**.xhU7OZ4K…E[Š’KZ&#IfggýhijjìklmmnnoppqqrrsttuuwxxÝy{{qO9),).2;56ATa.(1'A`K,ZQNA00eeggýhijjðklmmnnoppqqrrstuuþwxxày{{uYE<578,*ÚÝÝþ~ñ€‚ƒƒ„„…††‡‡ˆ‰‰ŠŒýŽæ‘’’““‘6^w^?!&!7F2I /22ø7…ÉØÛ}}û€‚ƒƒù„…††‡‡‰‰Šó‹ŒŒŽŽ‘‘’““í‹D‹_B ^zGB&L-/1223}Í€‚ƒƒ„„…††‡ˆˆ‰‰ŠŠ‹ŒŒŽŽ’““ŒR6M;i„MBzPD1223|}€ƒ„Õ…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽ‹ty‘’’“Š_[‹Y=qfKK11223|}ü€‚ƒƒð„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽé‘‘””i3AA0FL6MZ$1123þ{||}€ë‚ƒƒ„„…†…‡‡ˆˆ‰ŠŠ‹‹ŒŽŽê‘˜ |9M200-)11÷292233zz||þ}€ƒ„…‡ˆø‰ŠŠ‹‹ŒŽŽâ‰…^c‘N&EŒ00  G=117=2N73zzú{||}}€ù‚ƒƒ„„……‡ˆÐ‰ŠŠ‹‹Œˆ_mcj‡‰^4Ey52]ˆd1122BI62yyzz{||}}€ù‚ƒƒ„„……Û†‡ˆˆ‰ŠŠ‹‹ŒŽ†]?xo0 CS00MoŽ;14922õxyyzz{||}}ü€‚ƒƒ×„……|ˆˆ‰ŠŠ‹‹ŒŽ”–j?LlB11^6;122xyzú{||}}€ù‚ƒ‚„„……‡ˆŠ‹ÕŒ‰x€hSC- 7’š e`9}31B23L?:vvwxyyzz{||}}ü*€‚‚„…‡ˆŠ‹ãŒ•/ 6u 9+!?0115N}8224vvøwxyyzz{||þ}ü€‚‚ýƒ„……‡ˆþ‰‹‹ìŒŽ‡tacJA^7~K$@8>11ù^=ag:uvvûwxyyzz|}€þ‚‚ýƒ„……‡ˆ‰‹ý‰x``êp|jpe/$xzKgF9t¦j§¦tuuvvôwxyyzz{||}}€þ‚‚ýƒ„……ù†ˆ{‰‰‹‹üŠ~``éj‘€R]40’df«f˜³”ttuvvûwxyyzz|}û~€€‚‚ôƒ„……†kkˆ‰Š‹‹ãŒ‚_`an‘”om#hoŒ??¥¦pŠupssttvvôwxyyzz{||}}~~€þ‚‚ú„……††ˆˆ‰‹è†__bv„a]LKTPK8K»«`Jssýtuvvôwxyyzz{||}}~~€þ‚‚þƒ……†à‡ˆˆ‰‰‹‹‰`_`wŽ}aa|}…yµ¿¸Cd£Srssýtuvvôwxyyzz{||}}~~€þ‚‚þƒ……†à‡ˆˆ‰‰‹ˆa^_tŽŽ~`a}‘’b–»¿·Ž1=Qqqsstvôwxxyyz{||}}~~€þ‚‚þƒ……†ˆæ‰Š…}_f‰l`hŒ{‹½¿À¿¤h›†qqsýtuvvýwxyyzý|{}}~€þ‚‚øƒ„……††‡ˆˆßŠarŒˆe`g„i©¿¾¾À¸½¸“ppqqrssttvvýwxyyþz{{}~ý‚‚ùƒ„……††ˆˆñ‰~nz‹Œˆa_k‡U¬¿¿Àü¿½¦ppqstvýwxyyþz{{ý|}~~ý‚‚ùƒ„…††‡ˆˆþ‰ŠŠöŒ~^^Jh˜§¾¿¿ù¾ÀÀ¾¶oppqstvwyz{}~þ‚‚ùƒ„……†‡ˆˆ‰ŠølCK¤´½¿¿¾¿ü¼nnppqstvýwxyyþz{{}~þ‚‚ýƒ„……솇ˆˆŠ“i]Mƒ–½½¾½¿¿¾¿¿Àþ¾nnpqstvþwxxz{ø|}~~€‚‚ýƒ„……ñ‡†ˆ©•§ŽŸµ½¾¾¿¿ôÀµmmnnoppqqssþtvvþwxxýyz{{ò|}~~€‚‚ƒ„„……ñhy²¼¼«ŽŽ”«´¼¾¾¿¿þlmmùnoppqqsstvþwxxz{þ|~~þ€‚‚⃄……pˆ¯¹¼º«d5¤¯º½¾½¾¿»q½¾llmmùnoppqqsstûuvwwxxùyz{{||~~þ€‚‚ƒä>jº»»¼ (§½½¾…¸¿»œ}|£¾kklmmðnoppqqrssttvvwwxxýyz{{Ø|}~‹˜wMFt¤º»¼¸¨mv’¯½¾¥€¶¾²…•Šd½jjklmmùnoppqqsstûvuwwxxýyz{{Ý|†•fbjc:*=µ¾º¹º»†^Ž³½lP©½¼¨ck‰®¾jjôklmmnnoppqqssþtuuývwxxÙy{}siO)+)).6Nˆ ¹ºº¯…&MŽ•“°b/¡¾¼sBHF¾ijjôklmmnnoppqqssþtuuwxØy{}L,()-)+1.0))./@EM[H‚e/J{MlH;9^‹•´¹º´tvr`MgghhjjkmnöoppqqsrstuuØvwxx|ŠU><,)115:7A5*D{yOR9I`hŽ–›b`A50ggýhijjõklmmnnoppqrrýstuuØvwxxnOgqG=2,0+)**.xhU7OZ4K…E[Š’KZ&#IfggýhijjìklmmnnoppqqrrsttuuwxxÝy{{qO9),).2;56ATa.(1'A`K,ZQNA00eeggýhijjðklmmnnoppqqrrstuuþwxxày{{uYE<578,*ÚÝÝþ~ñ€‚ƒƒ„„…††‡‡ˆ‰‰ŠŒýŽæ‘’’““‘6^w^?!&!7F2I /22ø7…ÉØÛ}}û€‚ƒƒù„…††‡‡‰‰Šó‹ŒŒŽŽ‘‘’““í‹D‹_B ^zGB&L-/1223}Í€‚ƒƒ„„…††‡ˆˆ‰‰ŠŠ‹ŒŒŽŽ’““ŒR6M;i„MBzPD1223|}€ƒ„Õ…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽ‹ty‘’’“Š_[‹Y=qfKK11223|}ü€‚ƒƒð„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽé‘‘””i3AA0FL6MZ$1123þ{||}€ë‚ƒƒ„„…†…‡‡ˆˆ‰ŠŠ‹‹ŒŽŽê‘˜ |9M200-)11÷292233zz||þ}€ƒ„…‡ˆø‰ŠŠ‹‹ŒŽŽâ‰…^c‘N&EŒ00  G=117=2N73zzú{||}}€ù‚ƒƒ„„……‡ˆÐ‰ŠŠ‹‹Œˆ_mcj‡‰^4Ey52]ˆd1122BI62yyzz{||}}€ù‚ƒƒ„„……Û†‡ˆˆ‰ŠŠ‹‹ŒŽ†]?xo0 CS00MoŽ;14922õxyyzz{||}}ü€‚ƒƒ×„……|ˆˆ‰ŠŠ‹‹ŒŽ”–j?LlB11^6;122xyzú{||}}€ù‚ƒ‚„„……‡ˆŠ‹ÕŒ‰x€hSC- 7’š e`9}31B23L?:vvwxyyzz{||}}ü*€‚‚„…‡ˆŠ‹ãŒ•/ 6u 9+!?0115N}8224vvøwxyyzz{||þ}ü€‚‚ýƒ„……‡ˆþ‰‹‹ìŒŽ‡tacJA^7~K$@8>11ù^=ag:uvvûwxyyzz|}€þ‚‚ýƒ„……‡ˆ‰‹ý‰x``êp|jpe/$xzKgF9t¦j§¦tuuvvôwxyyzz{||}}€þ‚‚ýƒ„……ù†ˆ{‰‰‹‹üŠ~``éj‘€R]40’df«f˜³”ttuvvûwxyyzz|}û~€€‚‚ôƒ„……†kkˆ‰Š‹‹ãŒ‚_`an‘”om#hoŒ??¥¦pŠupssttvvôwxyyzz{||}}~~€þ‚‚ú„……††ˆˆ‰‹è†__bv„a]LKTPK8K»«`Jssýtuvvôwxyyzz{||}}~~€þ‚‚þƒ……†à‡ˆˆ‰‰‹‹‰`_`wŽ}aa|}…yµ¿¸Cd£Srssýtuvvôwxyyzz{||}}~~€þ‚‚þƒ……†à‡ˆˆ‰‰‹ˆa^_tŽŽ~`a}‘’b–»¿·Ž1=Qqqsstvôwxxyyz{||}}~~€þ‚‚þƒ……†ˆæ‰Š…}_f‰l`hŒ{‹½¿À¿¤h›†qqsýtuvvýwxyyzý|{}}~€þ‚‚øƒ„……††‡ˆˆßŠarŒˆe`g„i©¿¾¾À¸½¸“ppqqrssttvvýwxyyþz{{}~ý‚‚ùƒ„……††ˆˆñ‰~nz‹Œˆa_k‡U¬¿¿Àü¿½¦ppqstvýwxyyþz{{ý|}~~ý‚‚ùƒ„…††‡ˆˆþ‰ŠŠöŒ~^^Jh˜§¾¿¿ù¾ÀÀ¾¶oppqstvwyz{}~þ‚‚ùƒ„……†‡ˆˆ‰ŠølCK¤´½¿¿¾¿ü¼nnppqstvýwxyyþz{{}~þ‚‚ýƒ„……솇ˆˆŠ“i]Mƒ–½½¾½¿¿¾¿¿Àþ¾nnpqstvþwxxz{ø|}~~€‚‚ýƒ„……ñ‡†ˆ©•§ŽŸµ½¾¾¿¿ôÀµmmnnoppqqssþtvvþwxxýyz{{ò|}~~€‚‚ƒ„„……ñhy²¼¼«ŽŽ”«´¼¾¾¿¿þlmmùnoppqqsstvþwxxz{þ|~~þ€‚‚⃄……pˆ¯¹¼º«d5¤¯º½¾½¾¿»q½¾llmmùnoppqqsstûuvwwxxùyz{{||~~þ€‚‚ƒä>jº»»¼ (§½½¾…¸¿»œ}|£¾kklmmðnoppqqrssttvvwwxxýyz{{Ø|}~‹˜wMFt¤º»¼¸¨mv’¯½¾¥€¶¾²…•Šd½jjklmmùnoppqqsstûvuwwxxýyz{{Ý|†•fbjc:*=µ¾º¹º»†^Ž³½lP©½¼¨ck‰®¾jjôklmmnnoppqqssþtuuývwxxÙy{}siO)+)).6Nˆ ¹ºº¯…&MŽ•“°b/¡¾¼sBHF¾ijjôklmmnnoppqqssþtuuwxØy{}L,()-)+1.0))./@EM[H‚e/J{MlH;9^‹•´¹º´tvr`MgghhjjkmnöoppqqsrstuuØvwxx|ŠU><,)115:7A5*D{yOR9I`hŽ–›b`A50ggýhijjõklmmnnoppqrrýstuuØvwxxnOgqG=2,0+)**.xhU7OZ4K…E[Š’KZ&#IfggýhijjìklmmnnoppqqrrsttuuwxxÝy{{qO9),).2;56ATa.(1'A`K,ZQNA00eeggýhijjðklmmnnoppqqrrstuuþwxxày{{uYE<578,*KMP—ÀÂö†}ÅÆÆÈüÉÊËÌÌñÍÎÏÏÐÐÑÒÒÓÓÕÕù6678ô,$[­ÒåäÌJ7÷ *®}A¿ÂÂÃÄûÅÆÆÇÈÈüÉÊËÌÌòÍÎÏÏÐÐÑÒÒÓÓÔù667ñFQauŽ««Ãä圛7öB>˜—ƒÀÀÂÂÃôÄÅÅÆÇÇÈÈÉÊËÌÌéÍÎÏÏÐÐÑÒÒÓÓù[RNLLY‘¼ÜͪªëºâXp4<,(9¯ªi”ÀÁÂÂÃÜÄÅÅÆÇÇÈÉÉÊËËÌÌÍÎÏÏÐÐÑÒÒÓùßßàáàááââÕ««ê¶}ÆÄV7>Thã»>:*ô"(C|[°¿ÀÀÂÂþÄÅÅüÆÇÇÉÉýÊËÌÌýÍÎÏÏçÐÑùΙ‹ßáàÏYj‡†rvR âw9:39ñ 2V•¦r–»•³ÀÀÁÂÂíÃÄÄÅÆÆdžÆÉÉÊÊËÌÌÍÎÏÏËÐù4>fÎÝÜ̽ɡ£ª§£¹ÝA9:70?Lh‚™tPJ£¿ÀÀÁÃÆÃÃÄÄÅÆÆÇÇÉÉÊÌýÍÎÏÏØù\›¯ṟœààÞ˪««¹¼;99A6C">TIg¨¼¾¾¿¿ÁÁÂÄúÅÆÆÇÇÉÉÊçËÌÌÍÎÏÏùßÚ´„Žw¢àááÔªª«ªR99ï79!.jg]´»»¼¼½¾¾ü¿ÁÁÂÂüÃÄÄÆÆÇÉÊÌÜÍÎÏùÞÝ×¼[¢Úààá߯§šI'8997)+Md+8dº»»ý¼½¾¾ü¿ÀÁÂÂ÷ÃÄÄÅÆÆÇÇÉÉþÊÌÌüÍÎùÞÞûÀÄÛßààéÑ”8898*>%C‹¹¹º»»¼¾ÁÂÃùÄÅÆÆÇÇÉÉÊÌ×ÍùÞÞÝÞÞÔÊÎáÛŒ 889A@H9 ¶¸¹¹·º»»¼½¾¾ÀýÁÂÃÃùÄÅÆÆÇÇÉÉÊïËÌÌùÅ’B:55=s˜m6)ì788B. AXi·¸¸¹³»»ý¼½¾¾ñÀ¿ÀÁÂÃÃÄÄÅÆÆÇÇÉÉÊûËÌù3445ü64 ë28…BVD334DF†554WCG=gt 4e„„ª²²þ³µµ¶¸ºú»¼¼½½¿¿ÀýÁÂÃÃÜÄÅÆùPjlQ43E PON53!"‡i7IPU7 dz«±±²²þ³µµý¶·¸¸ºú»¼¼½½¿¿ÀýÁÂÃÃÜÄÅù@4gˆA=lŸ‰`c559W •šUtc8h/fw¨°±±²²ý³´µµþ¶¸¸¹ùº»¼¼½½¿¿ÀýÁÂÃÃÜÄùO8^W33Gž‡a\46mu?™§pHnUb[ x¦¯¯°±²²þ³µµ·õ¸¡³¹º»¼¼½½¿¿ÀýÁÂÃÃáùˆ9F@oŠBšNu}@th(EEƒ°«‘7G$ ~¢¯¯ý°±²²þ³µµË·Ÿo¹ºº»¼¼½½¾¿¿ÀÀÁÂÃÃùP2BIŽ˜Cb[¢’TŠ+*s¡¾°Z]{`\t›®¯¯ý°±²²þ³µµü¶·¸¹¹Øº»¼¼½½¾¿¿ÀÀÁÂÃù6l¹²gĺœvw«¬¬÷­®®¯°°±±³³´úµ¶¶·¸¹¹úù¿¦n“••Þtƒ`ÂÀÀÁÀš†‹“L»ÃÁ˜Žjd™Ÿ¤´´K»À³¤ª¬¬­ù®¯°°±±³³Â´µ¶¶·¸¹¹ù¾Š˜¢•KƼÌcÀÀÁ¸¦š˜•p¹³Ž’¦²dT»»¥Â­A”««¬¬­®®¯°°±±³³´Ãµ¶¶··¹ù±]Š>BzTÏÒ›[¾µ·_{’‡„•…zŽŽ‘¢ÃÀ­uqžš¡³Å¿‰†««¬¬­­®¯°°±±³³´Ãµ¶¶··ùXod6ji«W½¾“Xwš‰R:Ox€d_rzŽÀÄÃþz¥¿¢vžµ}g©ª«¬¬­­®¯°°±±³³´¶ê·ùg>8g{˜£¥À¾w‰gL8?{jjèkh/ªÃÄÃ÷®¨”ùcƒxW‰§ª«¬­­ô®¯°°±±²³³´´¶¶êù20E_‡ª{…|_DhUCLQxjjÖhS†|‘ÂÃÃĺ’{¶Ä»ŒC?\ªª«¬­­®®¯°°±±²³³´´¶¶ù00äDV“’”•xm[âKj›œ„DƒÃÄÃøiwû²dO©©ªª««­­ä®¯°°±±²³³´´ù!%'+%$=ebOß 4Was‹ž›œŽ¬¿Ãï•c®ŽRK…¨©©ªª«¬­­Á®¯°°±±²³³´ù  ObM-b+342338^†xŒ¯Ã¶;m‹gX‚§¨©©ªª«¬­­Æ®¯°°±±²³³ù-/>(A\bEAG3EWX19I723;f~Ž›uK¨Wiy{vˆ¤§¨¨ªªý«¬­­Æ®¯°°±±²³ù^mzE =d~„†ˆ‰’–—€C9\’yX:>B744:5š§]zfy‰hXŒ§§¨¨ªªý«¬­­é®¯°°±±²ùƒ„……††ˆˆ‰Š‘““””þ–——å–Œu]I934G4J•†‰‘|nMk¦¦§§¨¨ªª«­ö®¯°°±±ùŠ‹ŒŒþû‘’““””þ–——ý˜™ššäœ”¤9@Nevy}ƒŠ–šž¢¤§§¨|ªª«¬­­î®¯°°±ù‰Š‹ŒŒŽ‘‘þ“””þ–——þ™ššè›¡˜fhBI`bI679@?<86677@7ªªý«¬­­÷®¯°°ù‰‰ŠŒŒþŽŽ‘ý’“””–—˜ê™šš£›’„n€£ª{LPd¥¼¸¤¥¥§§¨ªý«¬­­û®¯°ù‰‰ýŠ‹ŒŒúŽŽ‘‘“”ä•––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥§§¨ªý«¬­­÷®¯ùˆˆ‰‰Š‹‹ÖŒŽŽ‘‘’““”••–——˜™™šš›œœžŸŸ  ¡¢¢££¤¥¥§§¨ú©ªª«¬­­ý®ùˆˆý‰Š‹‹þŽŽ‘“”ó•––——˜™™šš›œýžŸ  ÷¡¢££¤¤¥¥§§¨ªý«¬­­¿ù‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®678ô,rÛääåx.ð2!>KMP—ÀÂö†}ÅÆÆÈüÉÊËÌÌñÍÎÏÏÐÐÑÒÒÓÓÕÕù6678ô,$[­ÒåäÌJ7÷ *®}A¿ÂÂÃÄûÅÆÆÇÈÈüÉÊËÌÌòÍÎÏÏÐÐÑÒÒÓÓÔù667ñFQauŽ««Ãä圛7öB>˜—ƒÀÀÂÂÃôÄÅÅÆÇÇÈÈÉÊËÌÌéÍÎÏÏÐÐÑÒÒÓÓù[RNLLY‘¼ÜͪªëºâXp4<,(9¯ªi”ÀÁÂÂÃÜÄÅÅÆÇÇÈÉÉÊËËÌÌÍÎÏÏÐÐÑÒÒÓùßßàáàááââÕ««ê¶}ÆÄV7>Thã»>:*ô"(C|[°¿ÀÀÂÂþÄÅÅüÆÇÇÉÉýÊËÌÌýÍÎÏÏçÐÑùΙ‹ßáàÏYj‡†rvR âw9:39ñ 2V•¦r–»•³ÀÀÁÂÂíÃÄÄÅÆÆdžÆÉÉÊÊËÌÌÍÎÏÏËÐù4>fÎÝÜ̽ɡ£ª§£¹ÝA9:70?Lh‚™tPJ£¿ÀÀÁÃÆÃÃÄÄÅÆÆÇÇÉÉÊÌýÍÎÏÏØù\›¯ṟœààÞ˪««¹¼;99A6C">TIg¨¼¾¾¿¿ÁÁÂÄúÅÆÆÇÇÉÉÊçËÌÌÍÎÏÏùßÚ´„Žw¢àááÔªª«ªR99ï79!.jg]´»»¼¼½¾¾ü¿ÁÁÂÂüÃÄÄÆÆÇÉÊÌÜÍÎÏùÞÝ×¼[¢Úààá߯§šI'8997)+Md+8dº»»ý¼½¾¾ü¿ÀÁÂÂ÷ÃÄÄÅÆÆÇÇÉÉþÊÌÌüÍÎùÞÞûÀÄÛßààéÑ”8898*>%C‹¹¹º»»¼¾ÁÂÃùÄÅÆÆÇÇÉÉÊÌ×ÍùÞÞÝÞÞÔÊÎáÛŒ 889A@H9 ¶¸¹¹·º»»¼½¾¾ÀýÁÂÃÃùÄÅÆÆÇÇÉÉÊïËÌÌùÅ’B:55=s˜m6)ì788B. AXi·¸¸¹³»»ý¼½¾¾ñÀ¿ÀÁÂÃÃÄÄÅÆÆÇÇÉÉÊûËÌù3445ü64 ë28…BVD334DF†554WCG=gt 4e„„ª²²þ³µµ¶¸ºú»¼¼½½¿¿ÀýÁÂÃÃÜÄÅÆùPjlQ43E PON53!"‡i7IPU7 dz«±±²²þ³µµý¶·¸¸ºú»¼¼½½¿¿ÀýÁÂÃÃÜÄÅù@4gˆA=lŸ‰`c559W •šUtc8h/fw¨°±±²²ý³´µµþ¶¸¸¹ùº»¼¼½½¿¿ÀýÁÂÃÃÜÄùO8^W33Gž‡a\46mu?™§pHnUb[ x¦¯¯°±²²þ³µµ·õ¸¡³¹º»¼¼½½¿¿ÀýÁÂÃÃáùˆ9F@oŠBšNu}@th(EEƒ°«‘7G$ ~¢¯¯ý°±²²þ³µµË·Ÿo¹ºº»¼¼½½¾¿¿ÀÀÁÂÃÃùP2BIŽ˜Cb[¢’TŠ+*s¡¾°Z]{`\t›®¯¯ý°±²²þ³µµü¶·¸¹¹Øº»¼¼½½¾¿¿ÀÀÁÂÃù6l¹²gĺœvw«¬¬÷­®®¯°°±±³³´úµ¶¶·¸¹¹úù¿¦n“••Þtƒ`ÂÀÀÁÀš†‹“L»ÃÁ˜Žjd™Ÿ¤´´K»À³¤ª¬¬­ù®¯°°±±³³Â´µ¶¶·¸¹¹ù¾Š˜¢•KƼÌcÀÀÁ¸¦š˜•p¹³Ž’¦²dT»»¥Â­A”««¬¬­®®¯°°±±³³´Ãµ¶¶··¹ù±]Š>BzTÏÒ›[¾µ·_{’‡„•…zŽŽ‘¢ÃÀ­uqžš¡³Å¿‰†««¬¬­­®¯°°±±³³´Ãµ¶¶··ùXod6ji«W½¾“Xwš‰R:Ox€d_rzŽÀÄÃþz¥¿¢vžµ}g©ª«¬¬­­®¯°°±±³³´¶ê·ùg>8g{˜£¥À¾w‰gL8?{jjèkh/ªÃÄÃ÷®¨”ùcƒxW‰§ª«¬­­ô®¯°°±±²³³´´¶¶êù20E_‡ª{…|_DhUCLQxjjÖhS†|‘ÂÃÃĺ’{¶Ä»ŒC?\ªª«¬­­®®¯°°±±²³³´´¶¶ù00äDV“’”•xm[âKj›œ„DƒÃÄÃøiwû²dO©©ªª««­­ä®¯°°±±²³³´´ù!%'+%$=ebOß 4Was‹ž›œŽ¬¿Ãï•c®ŽRK…¨©©ªª«¬­­Á®¯°°±±²³³´ù  ObM-b+342338^†xŒ¯Ã¶;m‹gX‚§¨©©ªª«¬­­Æ®¯°°±±²³³ù-/>(A\bEAG3EWX19I723;f~Ž›uK¨Wiy{vˆ¤§¨¨ªªý«¬­­Æ®¯°°±±²³ù^mzE =d~„†ˆ‰’–—€C9\’yX:>B744:5š§]zfy‰hXŒ§§¨¨ªªý«¬­­é®¯°°±±²ùƒ„……††ˆˆ‰Š‘““””þ–——å–Œu]I934G4J•†‰‘|nMk¦¦§§¨¨ªª«­ö®¯°°±±ùŠ‹ŒŒþû‘’““””þ–——ý˜™ššäœ”¤9@Nevy}ƒŠ–šž¢¤§§¨|ªª«¬­­î®¯°°±ù‰Š‹ŒŒŽ‘‘þ“””þ–——þ™ššè›¡˜fhBI`bI679@?<86677@7ªªý«¬­­÷®¯°°ù‰‰ŠŒŒþŽŽ‘ý’“””–—˜ê™šš£›’„n€£ª{LPd¥¼¸¤¥¥§§¨ªý«¬­­û®¯°ù‰‰ýŠ‹ŒŒúŽŽ‘‘“”ä•––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥§§¨ªý«¬­­÷®¯ùˆˆ‰‰Š‹‹ÖŒŽŽ‘‘’““”••–——˜™™šš›œœžŸŸ  ¡¢¢££¤¥¥§§¨ú©ªª«¬­­ý®ùˆˆý‰Š‹‹þŽŽ‘“”ó•––——˜™™šš›œýžŸ  ÷¡¢££¤¤¥¥§§¨ªý«¬­­¿ù‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®678ô,rÛääåx.ð2!>KMP—ÀÂö†}ÅÆÆÈüÉÊËÌÌñÍÎÏÏÐÐÑÒÒÓÓÕÕù6678ô,$[­ÒåäÌJ7÷ *®}A¿ÂÂÃÄûÅÆÆÇÈÈüÉÊËÌÌòÍÎÏÏÐÐÑÒÒÓÓÔù667ñFQauŽ««Ãä圛7öB>˜—ƒÀÀÂÂÃôÄÅÅÆÇÇÈÈÉÊËÌÌéÍÎÏÏÐÐÑÒÒÓÓù[RNLLY‘¼ÜͪªëºâXp4<,(9¯ªi”ÀÁÂÂÃÜÄÅÅÆÇÇÈÉÉÊËËÌÌÍÎÏÏÐÐÑÒÒÓùßßàáàááââÕ««ê¶}ÆÄV7>Thã»>:*ô"(C|[°¿ÀÀÂÂþÄÅÅüÆÇÇÉÉýÊËÌÌýÍÎÏÏçÐÑùΙ‹ßáàÏYj‡†rvR âw9:39ñ 2V•¦r–»•³ÀÀÁÂÂíÃÄÄÅÆÆdžÆÉÉÊÊËÌÌÍÎÏÏËÐù4>fÎÝÜ̽ɡ£ª§£¹ÝA9:70?Lh‚™tPJ£¿ÀÀÁÃÆÃÃÄÄÅÆÆÇÇÉÉÊÌýÍÎÏÏØù\›¯ṟœààÞ˪««¹¼;99A6C">TIg¨¼¾¾¿¿ÁÁÂÄúÅÆÆÇÇÉÉÊçËÌÌÍÎÏÏùßÚ´„Žw¢àááÔªª«ªR99ï79!.jg]´»»¼¼½¾¾ü¿ÁÁÂÂüÃÄÄÆÆÇÉÊÌÜÍÎÏùÞÝ×¼[¢Úààá߯§šI'8997)+Md+8dº»»ý¼½¾¾ü¿ÀÁÂÂ÷ÃÄÄÅÆÆÇÇÉÉþÊÌÌüÍÎùÞÞûÀÄÛßààéÑ”8898*>%C‹¹¹º»»¼¾ÁÂÃùÄÅÆÆÇÇÉÉÊÌ×ÍùÞÞÝÞÞÔÊÎáÛŒ 889A@H9 ¶¸¹¹·º»»¼½¾¾ÀýÁÂÃÃùÄÅÆÆÇÇÉÉÊïËÌÌùÅ’B:55=s˜m6)ì788B. AXi·¸¸¹³»»ý¼½¾¾ñÀ¿ÀÁÂÃÃÄÄÅÆÆÇÇÉÉÊûËÌù3445ü64 ë28…BVD334DF†554WCG=gt 4e„„ª²²þ³µµ¶¸ºú»¼¼½½¿¿ÀýÁÂÃÃÜÄÅÆùPjlQ43E PON53!"‡i7IPU7 dz«±±²²þ³µµý¶·¸¸ºú»¼¼½½¿¿ÀýÁÂÃÃÜÄÅù@4gˆA=lŸ‰`c559W •šUtc8h/fw¨°±±²²ý³´µµþ¶¸¸¹ùº»¼¼½½¿¿ÀýÁÂÃÃÜÄùO8^W33Gž‡a\46mu?™§pHnUb[ x¦¯¯°±²²þ³µµ·õ¸¡³¹º»¼¼½½¿¿ÀýÁÂÃÃáùˆ9F@oŠBšNu}@th(EEƒ°«‘7G$ ~¢¯¯ý°±²²þ³µµË·Ÿo¹ºº»¼¼½½¾¿¿ÀÀÁÂÃÃùP2BIŽ˜Cb[¢’TŠ+*s¡¾°Z]{`\t›®¯¯ý°±²²þ³µµü¶·¸¹¹Øº»¼¼½½¾¿¿ÀÀÁÂÃù6l¹²gĺœvw«¬¬÷­®®¯°°±±³³´úµ¶¶·¸¹¹úù¿¦n“••Þtƒ`ÂÀÀÁÀš†‹“L»ÃÁ˜Žjd™Ÿ¤´´K»À³¤ª¬¬­ù®¯°°±±³³Â´µ¶¶·¸¹¹ù¾Š˜¢•KƼÌcÀÀÁ¸¦š˜•p¹³Ž’¦²dT»»¥Â­A”««¬¬­®®¯°°±±³³´Ãµ¶¶··¹ù±]Š>BzTÏÒ›[¾µ·_{’‡„•…zŽŽ‘¢ÃÀ­uqžš¡³Å¿‰†««¬¬­­®¯°°±±³³´Ãµ¶¶··ùXod6ji«W½¾“Xwš‰R:Ox€d_rzŽÀÄÃþz¥¿¢vžµ}g©ª«¬¬­­®¯°°±±³³´¶ê·ùg>8g{˜£¥À¾w‰gL8?{jjèkh/ªÃÄÃ÷®¨”ùcƒxW‰§ª«¬­­ô®¯°°±±²³³´´¶¶êù20E_‡ª{…|_DhUCLQxjjÖhS†|‘ÂÃÃĺ’{¶Ä»ŒC?\ªª«¬­­®®¯°°±±²³³´´¶¶ù00äDV“’”•xm[âKj›œ„DƒÃÄÃøiwû²dO©©ªª««­­ä®¯°°±±²³³´´ù!%'+%$=ebOß 4Was‹ž›œŽ¬¿Ãï•c®ŽRK…¨©©ªª«¬­­Á®¯°°±±²³³´ù  ObM-b+342338^†xŒ¯Ã¶;m‹gX‚§¨©©ªª«¬­­Æ®¯°°±±²³³ù-/>(A\bEAG3EWX19I723;f~Ž›uK¨Wiy{vˆ¤§¨¨ªªý«¬­­Æ®¯°°±±²³ù^mzE =d~„†ˆ‰’–—€C9\’yX:>B744:5š§]zfy‰hXŒ§§¨¨ªªý«¬­­é®¯°°±±²ùƒ„……††ˆˆ‰Š‘““””þ–——å–Œu]I934G4J•†‰‘|nMk¦¦§§¨¨ªª«­ö®¯°°±±ùŠ‹ŒŒþû‘’““””þ–——ý˜™ššäœ”¤9@Nevy}ƒŠ–šž¢¤§§¨|ªª«¬­­î®¯°°±ù‰Š‹ŒŒŽ‘‘þ“””þ–——þ™ššè›¡˜fhBI`bI679@?<86677@7ªªý«¬­­÷®¯°°ù‰‰ŠŒŒþŽŽ‘ý’“””–—˜ê™šš£›’„n€£ª{LPd¥¼¸¤¥¥§§¨ªý«¬­­û®¯°ù‰‰ýŠ‹ŒŒúŽŽ‘‘“”ä•––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥§§¨ªý«¬­­÷®¯ùˆˆ‰‰Š‹‹ÖŒŽŽ‘‘’““”••–——˜™™šš›œœžŸŸ  ¡¢¢££¤¥¥§§¨ú©ªª«¬­­ý®ùˆˆý‰Š‹‹þŽŽ‘“”ó•––——˜™™šš›œýžŸ  ÷¡¢££¤¤¥¥§§¨ªý«¬­­¿ù‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®ýþýþýýþýýýþýþþýýþýþþýþþýýûþýþþýýþýöþýýþþýýþýþþþùýýþþýýþýþýùþýþýþýþþýýþýýþýþôýþþýýþþýýþýþþýùþýýùþýþýþýþþýþýüþýþýýþþýýþýþýýþýþþþùýýþýþþýýþýþýþýþýýþýþþþùýýþþýýþý÷þýýþýþýþýýþþýýþþýýþþýýüþýþýýöþýýþþýýþýþþþùýýþýþþýýûþýýþýýüþýþý ýþþýýþþýýþýþýýþýþþýùþýýþþýýþþýþþýöþýýþþýýþýþþüùýýþþýûþýýþýýùþýýþýþýýþýýþýýþýþþýýþýþýýþýþþýùýþþýþýõþýþýþþýþþýþþýþþýýþøýþþýýþýþþýþýýþýþþøùýýþýþþýýþùýþýýþýþþ ýþ ýöþýýþþýýþýþþõùþýþýþýýþþýýøþýþþýþýþþýþþýýþýüþýýþþýþýýþýþþþùýýöþýþýýþþýýþþýúþýþþýþþýüþýýþþýþþýýöþýýþþýýþýþþþùý ýþýýþýýþýþýþýþþýýþýþýýþýþþûùýýüýýôþýþýýþýþýýþýýþþýýþýþþýýþþýýðþýþýýþþýýþþýýþýþþþùýýþýûþýýþýýùþýþýýþý ýþýþýýþýþþþùýýøüýýþþýþýýûþýýþýýþþýý÷þýýþýþýýþþîýþýýþýýþþýýþþýýþýþþúùþýýþýýþýþýúþýþýþýýþþýýöþýýþþýýþýþþûùýþýþþýöþýýþýþþýþýýþýþýöþýýþþýýþýþþþùýýýüýþþýþþýýøþýýþýþþýýþþýý÷þýþþýýþþýýöþýýþþýýþýþþþùýýþýþýüþýýþþýýüýþþüýþþýýþýþýýþýþþþùýýþþýþþýþýþýþýöþýýþþýþþýþþþýþþúýþþùþýýûþýýþýýüþýþýýúþýýþþýýþ ýþþýýþþýþþüùþýþþýþþýýþüýþþýýþüýþþýýþýþûýþýýþþøýþþýþùýþþýþýíþýþýþþýþýýþýþþýýþþýýþ ýþþýþþüùþýþþýþýþþýþþøýþýþþýýþþýþýþþýþþøùýýþþýþýýýþýþþôýþýþýþþýýþýþþ ýþýþýþþýþþüùýýþþýþþýýþþýýìþýýþþýþþýþýþýýþýýþþýýþýúþýþþýþþúùýýþýþþýþýþþýýþþýýþ ýþþýýýþýþþþýþþýùýþþýþýöþýýþþýýþþýýþþýýþþýýþýþýùýþþýþýüþýýþþýþþýýþûýþýþýýþþýýþýýþýþþñýþþýùýþþýþþýýþýýþýôþýþýþýþþýýþýýûþýýþýýýþýþþ÷ýþþýþþýýþþþùýýþþýýþþýýþýþñýüýþýþþýýþþýýþýýþþýþþùýþþ­ýýþþýþýñþýýþýýþýþþýþýþýýþþýýüþýþýý þýúùþýþýþþýýþýþþüýþþýýþþý ýþýþóýþþýþýþýýþþùýýþþýþþýþúýþþýýþþýþþýýþýþþýýþþýþþþýþþõýùýýþýýþýýþþýþùýþýþþýþþúýþýýþý ýþüýþýþþûýþùþýýþþýýûþýýþýýþöýþýþýþýþþýýøþýþýýþþý ýûþýþýþ þùùþýþýþýýþýþþýýþþýýþþýýûþýýþýýùþýýþþýþþþýþþþùýý÷þýýþýýþþýýþúýþýþþýýþüýþþýýüþýýþþýþþýþþõùþýþýýþýýþýýùþýýþýþýýþýþþý ýþþýþþüýþýþþüùþýþþýîþýýþýýþýþýþýþþýþþýýüþýþýýþýþýúþýþþýþþõùþþýþýýþþýþþýþýþýþþýýþý þüýþùýýùþýýþþýþþýýþýýþþýþþýøþýýþýýþýýþþýþþïýþýýþþùýýþþýýþþýþþýõþýýþýýþþýþýýþýùþýþýýþýýþþýþþíýþþùýþþýýþýþþýþþýýþþýþþýýþþýýýþýþþýóþýýþýþýýþýþýþþþýþþýùýþþýýþýþþ ýþýþ ýþþýþþùùýýþýþý ýþþýýþþýýþýùþýþýýþýýþûýþþýþþýùýþþýþþýýþþýýþþýýþý÷þýýþþýýþýýþþýþþýþúùþýþýþþýþýûþýþþýýûþýýþýýþýúþýþþýþþþýþþúùýþþýþþýýþýýøþýþþýýþý ýûþýýþýýýþýþþþýþþþýþþþùýýþýþþýþþüýþþýýýþýþþ ýþûýþþýþþóýþýþùþþýþýþýþþýþúýþýýþýýþýýþýýþþýýþþýþþüýùþýýøþýþþýýþýýþþýýþýþþýþþýþþýýþþýþþþýþþþùýýøþýþýýþþýýþþýýþýþüýþþý ýþýþûýþþùýýþúýþýþýþþýþþýýþþýýþþýýþþýýþþýý÷þýþþýþþýþþþýþþþýþþïùþþýýþþýýþýþþýýþýýþýþþýýýþýþþýýþýþþþýþþúùþþýýþþýûþýþþýýþýþûýþýþýýþý÷þýýþýýþýþþúùýþýýþþýûþýýþýýüþýþýýþýøþýýþýýþýý þîùýþýýþþýþþýýþþýýþýýþþýýþþýýøþýýþýþþýýþþýþþþýþþõùýþþýþýýþþýýûþýýþýýûþýýþýýþþýþþýþýþûýþþùýýþýþþýýüþýþýýþýþýþþýýûþýþýþþþýþþþùýýýþýþþýþýùþýþþýþýýþýþþýýýþýþþþýþ þþùýýþùýþýþýýþþýþýþýþýþüýþþýýþþýþ þþùþ>þ@@vigor-0.016.orig/vigor/v2cp0002.xbm0100664000076400007640000003115707103707232015312 0ustar cjw44cjw44/* Vigor morphing */ #define v2cp0002_width 128 #define v2cp0002_height 128 static char v2cp0002_bits[] = { 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x24, 0x49, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x22, 0x24, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x01, 0x25, 0x89, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa4, 0x24, 0xa2, 0xaa, 0x2a, 0x49, 0x50, 0x12, 0x10, 0x00, 0x00, 0x24, 0x11, 0x00, 0x00, 0x00, 0x12, 0x91, 0x04, 0x00, 0x80, 0x00, 0x05, 0x40, 0x02, 0x44, 0x08, 0x00, 0x80, 0x00, 0x00, 0x00, 0x44, 0x84, 0x54, 0x55, 0x15, 0x2a, 0x90, 0x0a, 0xa4, 0x00, 0xd1, 0x02, 0x00, 0x24, 0x00, 0x00, 0x92, 0x12, 0x42, 0x00, 0xa0, 0x80, 0x04, 0x40, 0x16, 0x64, 0x55, 0x49, 0x02, 0x00, 0x00, 0x00, 0x24, 0x52, 0x14, 0x55, 0x05, 0x14, 0xa0, 0x88, 0x2a, 0x50, 0x01, 0x02, 0x10, 0x40, 0x04, 0x00, 0x4a, 0x49, 0xa1, 0x00, 0x50, 0x41, 0x09, 0xf2, 0xf1, 0x0c, 0x88, 0x02, 0x80, 0x00, 0x00, 0x00, 0x10, 0x11, 0x0a, 0x55, 0x05, 0x09, 0x41, 0x6d, 0xaf, 0x15, 0x10, 0x26, 0x02, 0x00, 0x40, 0x00, 0x25, 0x4a, 0x51, 0x08, 0x10, 0x24, 0x5c, 0x7a, 0xb7, 0x47, 0x0d, 0x01, 0x00, 0x02, 0x00, 0x00, 0xa4, 0x10, 0x42, 0x51, 0xa5, 0x20, 0x51, 0x55, 0xac, 0xbf, 0x23, 0x46, 0x24, 0x40, 0x04, 0x00, 0x4a, 0x4a, 0x09, 0x02, 0x10, 0x85, 0x2a, 0x0a, 0x69, 0xf5, 0x80, 0x01, 0x00, 0x04, 0x00, 0x01, 0x90, 0x22, 0x52, 0xaa, 0x22, 0x90, 0x4a, 0x2b, 0xd1, 0xe1, 0x8d, 0x09, 0x00, 0x00, 0x00, 0x00, 0x25, 0x94, 0x24, 0x41, 0x44, 0x45, 0x21, 0xc9, 0x8e, 0x43, 0x52, 0x21, 0x49, 0x10, 0x08, 0x00, 0x49, 0x91, 0x24, 0x8a, 0x08, 0xfc, 0x57, 0x4d, 0x3a, 0xaa, 0x7e, 0x0f, 0x00, 0x80, 0x00, 0x04, 0x92, 0x24, 0x42, 0x24, 0x51, 0x6b, 0xad, 0x34, 0xcd, 0xea, 0xbe, 0x15, 0x80, 0x00, 0x20, 0x00, 0x24, 0xa5, 0x94, 0x24, 0x05, 0xa2, 0xaa, 0xd6, 0x9a, 0x8c, 0x7b, 0x73, 0x09, 0x12, 0x00, 0x00, 0x49, 0x08, 0x49, 0x82, 0xd0, 0x59, 0x99, 0x69, 0x6d, 0x03, 0x4d, 0x61, 0x00, 0x80, 0x00, 0x00, 0x4a, 0x29, 0x49, 0x14, 0x85, 0xaa, 0x21, 0x4b, 0x6b, 0xff, 0xf5, 0x02, 0x42, 0x00, 0x42, 0x04, 0x94, 0x52, 0x24, 0x49, 0x48, 0xfb, 0xba, 0x65, 0xab, 0xad, 0xbe, 0x41, 0x08, 0x02, 0x00, 0x00, 0x21, 0x84, 0x24, 0x49, 0xc9, 0xaa, 0x62, 0x55, 0x57, 0xb7, 0xd4, 0xe5, 0x01, 0x10, 0x04, 0x00, 0xaa, 0x52, 0x92, 0x10, 0x62, 0x35, 0x55, 0x8b, 0xd5, 0x0d, 0xfe, 0x2a, 0x49, 0x00, 0x40, 0x08, 0x4a, 0x4a, 0x12, 0xa5, 0x44, 0xb4, 0x6a, 0xbd, 0xbd, 0xfa, 0xda, 0x1b, 0x02, 0x42, 0x00, 0x00, 0x24, 0x91, 0x48, 0x12, 0xf2, 0xaf, 0x7b, 0x96, 0xea, 0xae, 0x69, 0xcd, 0x0f, 0x10, 0x02, 0x01, 0x49, 0x25, 0x49, 0x44, 0x42, 0x7d, 0xcb, 0xae, 0xd9, 0xb5, 0xfb, 0x3c, 0x99, 0x00, 0x08, 0x00, 0x12, 0x4a, 0x92, 0x92, 0x34, 0xda, 0x76, 0x6b, 0x6f, 0xef, 0xee, 0x24, 0x11, 0x04, 0x00, 0x08, 0x64, 0x91, 0x24, 0x92, 0xb4, 0xfe, 0xf6, 0xdf, 0xfd, 0xdd, 0xbd, 0x7d, 0x11, 0x90, 0x40, 0x00, 0x15, 0x55, 0x49, 0x49, 0x18, 0xcf, 0xad, 0x7a, 0xab, 0x76, 0xeb, 0xa9, 0x51, 0x00, 0x04, 0x00, 0x52, 0x12, 0x29, 0x92, 0x32, 0x5d, 0xf5, 0xeb, 0xff, 0x6f, 0xeb, 0x53, 0x9b, 0x02, 0x80, 0x08, 0x24, 0x49, 0x42, 0x49, 0xe4, 0xaf, 0xad, 0xff, 0xbf, 0xda, 0xfb, 0xdd, 0x86, 0x90, 0x08, 0x00, 0x4a, 0xa9, 0x14, 0x91, 0x34, 0xbb, 0x7b, 0xfd, 0xff, 0xbf, 0xf2, 0x77, 0x0c, 0x00, 0x00, 0x01, 0x92, 0x42, 0xa5, 0x24, 0xd9, 0xfd, 0xee, 0xff, 0xff, 0x75, 0xfd, 0x95, 0x0b, 0x19, 0x11, 0x08, 0x2a, 0x1a, 0x94, 0x4a, 0x9a, 0xcf, 0x5d, 0xff, 0xfd, 0xeb, 0xe7, 0x33, 0x29, 0x00, 0x00, 0x10, 0x52, 0xa1, 0x22, 0x24, 0x67, 0xbf, 0xb7, 0x5e, 0xf7, 0xab, 0x7a, 0xf5, 0x08, 0x21, 0x42, 0x00, 0x4a, 0xaa, 0xa4, 0x24, 0xb5, 0xf7, 0x3e, 0xfe, 0xde, 0xe7, 0x7d, 0xad, 0x31, 0x02, 0x80, 0x00, 0x92, 0x12, 0x95, 0x92, 0xc8, 0xaf, 0xab, 0xb6, 0xfb, 0x50, 0xaf, 0x55, 0x14, 0x10, 0x02, 0x04, 0x54, 0xa5, 0x24, 0xa4, 0x8a, 0xfa, 0x1e, 0x76, 0xd7, 0xc3, 0xfa, 0xc3, 0x51, 0x40, 0x08, 0x10, 0x49, 0x2a, 0x49, 0xa9, 0xf2, 0xbf, 0x8b, 0xd8, 0x3d, 0x84, 0xef, 0xa9, 0x08, 0x15, 0x20, 0x00, 0x95, 0x48, 0x52, 0xc9, 0xdc, 0x7f, 0x17, 0xb1, 0x6b, 0x11, 0xbd, 0xc3, 0x18, 0x10, 0x02, 0x01, 0x52, 0x95, 0x8a, 0x52, 0x56, 0xfd, 0x4d, 0xc2, 0x1e, 0xca, 0xff, 0x7f, 0x0b, 0x42, 0x40, 0x08, 0x94, 0xa4, 0x28, 0x44, 0x93, 0x7f, 0x4f, 0x14, 0x55, 0x00, 0xef, 0x93, 0x4a, 0x88, 0x08, 0x00, 0xa5, 0x4a, 0xa5, 0xaa, 0x55, 0xff, 0x2d, 0x40, 0x01, 0x40, 0xbf, 0x49, 0x25, 0x00, 0x02, 0x11, 0x49, 0x52, 0x24, 0x91, 0xd9, 0xf6, 0x07, 0x00, 0x10, 0x00, 0xfe, 0x5b, 0x47, 0x25, 0x20, 0x00, 0xaa, 0xa4, 0x4a, 0xa6, 0x6a, 0xff, 0x07, 0x40, 0x02, 0x00, 0xae, 0x4b, 0x01, 0x00, 0x04, 0x22, 0x2a, 0x15, 0xa9, 0xc8, 0x3a, 0xbd, 0x07, 0x48, 0x4a, 0x05, 0xfe, 0x5b, 0x2b, 0x91, 0x40, 0x00, 0x52, 0xa9, 0x44, 0xd5, 0x4c, 0xfe, 0x05, 0xaa, 0x0c, 0x09, 0xfe, 0xcf, 0x00, 0x04, 0x04, 0x04, 0x4a, 0x25, 0x95, 0xc4, 0xcd, 0xf7, 0x8b, 0xf8, 0x1d, 0x02, 0xfc, 0x6b, 0x48, 0x44, 0x88, 0x00, 0x92, 0x54, 0x29, 0x29, 0xb7, 0xfe, 0x06, 0xd5, 0x4e, 0x09, 0xba, 0x3b, 0x01, 0x11, 0x00, 0x24, 0x55, 0x49, 0x4a, 0x4a, 0xae, 0x7f, 0x4d, 0xd4, 0x1d, 0x02, 0xf6, 0x27, 0x24, 0x40, 0x22, 0x00, 0x2a, 0x95, 0x54, 0x91, 0xe6, 0xde, 0x8b, 0xc2, 0x97, 0x04, 0xbd, 0xa9, 0x82, 0x04, 0x88, 0x08, 0x49, 0xa9, 0x22, 0x55, 0x5e, 0xbe, 0x0a, 0xba, 0x1e, 0x00, 0xf5, 0xab, 0x17, 0x90, 0x00, 0x00, 0xaa, 0x32, 0x55, 0x52, 0xb7, 0xee, 0x17, 0xd4, 0x3b, 0x00, 0xff, 0xef, 0x40, 0x02, 0x92, 0x08, 0x2a, 0xa5, 0x94, 0x4a, 0x5a, 0x5f, 0x2d, 0xfd, 0xfb, 0x00, 0xff, 0xaf, 0x1f, 0x48, 0x00, 0x21, 0x52, 0x95, 0xa2, 0x52, 0x59, 0x6b, 0x7b, 0x6b, 0xef, 0xd7, 0x7f, 0x75, 0x95, 0x30, 0x22, 0x00, 0x25, 0x29, 0x95, 0xa4, 0xed, 0x7f, 0x6b, 0xfb, 0xbd, 0xd7, 0xfd, 0x07, 0x18, 0x02, 0x04, 0x09, 0xaa, 0x52, 0x2a, 0x35, 0x52, 0xdf, 0xed, 0xbf, 0xf7, 0xbf, 0xfd, 0xac, 0x94, 0x90, 0x20, 0x20, 0xaa, 0xaa, 0xa4, 0xb2, 0xe6, 0xfe, 0xed, 0xff, 0xb6, 0xf7, 0xfd, 0x19, 0x15, 0x02, 0x04, 0x02, 0x25, 0xa5, 0x2a, 0x49, 0x9a, 0xff, 0xef, 0xd7, 0xdf, 0x5f, 0xfd, 0xb7, 0x42, 0x28, 0x21, 0x00, 0x54, 0x2a, 0x49, 0xb5, 0x52, 0xf6, 0x8f, 0xbf, 0xba, 0x7f, 0xfa, 0xcb, 0x0b, 0x01, 0x40, 0x29, 0x55, 0xa5, 0x2a, 0x99, 0x6d, 0xff, 0xc7, 0xef, 0xef, 0x6f, 0xfc, 0xaa, 0x20, 0x24, 0x05, 0x00, 0x55, 0x55, 0x52, 0x22, 0x6d, 0xdd, 0x0e, 0xbf, 0x7d, 0x3f, 0xfc, 0x93, 0x84, 0x20, 0x90, 0x04, 0x92, 0xa4, 0x4a, 0x55, 0x35, 0xef, 0x57, 0xfb, 0xd6, 0x1f, 0xfc, 0x4d, 0x11, 0x8a, 0x04, 0x10, 0xaa, 0xaa, 0x54, 0x55, 0xad, 0xee, 0x0e, 0xd6, 0x7f, 0xbf, 0xfc, 0xdb, 0x52, 0x00, 0x20, 0x21, 0x55, 0x95, 0x4a, 0xba, 0xe7, 0xf7, 0x5b, 0x7f, 0xed, 0x0f, 0xfe, 0x2e, 0x08, 0xa9, 0x04, 0x04, 0x55, 0xa9, 0x94, 0xe2, 0x36, 0xde, 0x5f, 0xe8, 0xbd, 0x0e, 0xfa, 0x5b, 0x22, 0x01, 0x90, 0x00, 0x4a, 0x55, 0x55, 0x0a, 0x9b, 0xdf, 0x36, 0xa1, 0xf7, 0x12, 0xfe, 0x23, 0x09, 0xa4, 0x04, 0x2a, 0x55, 0x95, 0x52, 0x59, 0x34, 0xfe, 0x3e, 0x01, 0x2d, 0xa4, 0xbc, 0x57, 0xa0, 0x84, 0x50, 0x00, 0x2a, 0xa9, 0x4a, 0x52, 0x4d, 0xdd, 0x7b, 0x01, 0x00, 0x48, 0xfe, 0x17, 0x05, 0x10, 0x02, 0x44, 0x55, 0x55, 0xaa, 0x4a, 0x5a, 0xbf, 0x7a, 0x25, 0x00, 0x51, 0xfa, 0x77, 0xa8, 0x42, 0x90, 0x08, 0xaa, 0x4a, 0x55, 0x55, 0x7d, 0xff, 0x7f, 0xa0, 0x48, 0x3d, 0xfe, 0x4f, 0x01, 0x08, 0x05, 0x00, 0xaa, 0xaa, 0x24, 0x49, 0x41, 0x5d, 0xf5, 0x50, 0x85, 0x65, 0xea, 0xaf, 0x56, 0x21, 0x51, 0x25, 0x55, 0xaa, 0xaa, 0x2a, 0xeb, 0xfe, 0x7b, 0x8a, 0x03, 0x14, 0x7f, 0x5b, 0x01, 0x0a, 0x04, 0x00, 0xa9, 0xaa, 0xaa, 0x52, 0x4b, 0x6f, 0xff, 0x98, 0x5a, 0x40, 0xf6, 0x6f, 0x55, 0xa0, 0x88, 0x14, 0x56, 0xa5, 0x24, 0x55, 0xd6, 0xbf, 0xf5, 0x05, 0x28, 0x94, 0xff, 0x16, 0x80, 0x0a, 0x20, 0x40, 0xa9, 0xaa, 0x55, 0x4a, 0x7d, 0xbd, 0xfe, 0x23, 0xa0, 0xd0, 0xea, 0x5d, 0x15, 0x40, 0x05, 0x09, 0xaa, 0x4a, 0xaa, 0x52, 0x41, 0xfb, 0xfa, 0x86, 0x08, 0xf8, 0x7f, 0x17, 0xa0, 0x0a, 0x50, 0x00, 0x2a, 0x55, 0x55, 0x95, 0x5a, 0xf6, 0xfe, 0x0f, 0x81, 0xf8, 0xf6, 0xa7, 0x0a, 0xa0, 0x02, 0x2a, 0x55, 0x55, 0xa5, 0xaa, 0xea, 0xdd, 0x7d, 0x1b, 0x7e, 0xff, 0x7b, 0x0d, 0xa1, 0x0a, 0xa8, 0x00, 0xaa, 0xaa, 0x2a, 0x29, 0x09, 0x7d, 0xef, 0xff, 0xf6, 0xfd, 0xf7, 0x5b, 0x0a, 0xa0, 0x02, 0x24, 0x55, 0x55, 0x55, 0x55, 0xd5, 0xbf, 0xba, 0xf6, 0x5f, 0xf7, 0xdd, 0x8f, 0x50, 0x05, 0xa8, 0x00, 0xaa, 0x2a, 0x55, 0xa5, 0x2a, 0xbe, 0xf6, 0xdf, 0xfa, 0xfe, 0xdb, 0x1f, 0x05, 0x54, 0x01, 0x2a, 0x55, 0x55, 0xa9, 0x2a, 0xa5, 0xed, 0x7d, 0xed, 0xef, 0xfb, 0xff, 0xaa, 0x50, 0x09, 0xaa, 0x00, 0xaa, 0xaa, 0x4a, 0xaa, 0x94, 0xbe, 0xfb, 0xbf, 0x5d, 0xf7, 0xd5, 0x1f, 0x65, 0x50, 0x00, 0x24, 0x55, 0x55, 0x55, 0xa5, 0x6a, 0x7d, 0xbf, 0xf5, 0xfe, 0xff, 0xff, 0x3b, 0x08, 0x85, 0x52, 0x01, 0x55, 0x55, 0x55, 0x55, 0x55, 0x7d, 0x3f, 0xdf, 0x55, 0xea, 0x57, 0x6f, 0x49, 0x14, 0x04, 0x2a, 0xaa, 0xaa, 0xaa, 0x2a, 0xd5, 0xfe, 0xae, 0xf5, 0xf7, 0xfe, 0xdd, 0x25, 0x22, 0xa1, 0x90, 0x00, 0xaa, 0xaa, 0xaa, 0x52, 0x49, 0x5f, 0xfd, 0xbf, 0xde, 0xd5, 0xaf, 0xad, 0x24, 0x0a, 0x12, 0x24, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0x7c, 0x5d, 0xf6, 0x7b, 0xfd, 0xbb, 0x2b, 0x42, 0xa0, 0xa0, 0x08, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xd5, 0xdf, 0xa7, 0x6a, 0xeb, 0xb5, 0x4b, 0x94, 0x0a, 0x05, 0x21, 0x55, 0x55, 0x55, 0x25, 0x55, 0x3e, 0x7f, 0xfd, 0x3b, 0xbd, 0x6d, 0x97, 0x42, 0x50, 0x28, 0x0a, 0x56, 0x55, 0x55, 0x55, 0x49, 0xf5, 0xfc, 0xab, 0xf6, 0xea, 0xd1, 0x2e, 0x14, 0x85, 0x42, 0x20, 0x55, 0x55, 0x55, 0x55, 0x55, 0xad, 0x47, 0x4b, 0x4b, 0x6d, 0xeb, 0x47, 0xa1, 0x38, 0x88, 0x0a, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x7e, 0x56, 0xae, 0xe9, 0x23, 0x2d, 0x0a, 0x81, 0x12, 0x20, 0xaa, 0xaa, 0x2a, 0x55, 0x95, 0xda, 0xaa, 0xa9, 0x6b, 0x2a, 0xab, 0x4a, 0x51, 0x2a, 0x48, 0x05, 0xab, 0xaa, 0x6a, 0x55, 0x55, 0x95, 0xbe, 0x53, 0x67, 0x4d, 0xae, 0x15, 0x85, 0xa0, 0x12, 0x28, 0x6a, 0x55, 0x95, 0xaa, 0xaa, 0x5a, 0xa5, 0xb4, 0x55, 0x15, 0x81, 0x2b, 0x54, 0x0a, 0x48, 0x41, 0x56, 0xad, 0xaa, 0x4a, 0x29, 0xb5, 0xaa, 0xe1, 0x72, 0x21, 0x15, 0x56, 0x81, 0x50, 0x09, 0x0a, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x24, 0x35, 0x16, 0x40, 0x2d, 0x2a, 0x85, 0x50, 0x10, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x5a, 0xa7, 0x84, 0xa4, 0xa4, 0x0a, 0x55, 0x49, 0x14, 0x85, 0x22, 0xad, 0x5a, 0x55, 0x55, 0x55, 0x95, 0x2a, 0x10, 0x55, 0x09, 0x20, 0x2a, 0x12, 0x21, 0x28, 0x04, 0xaa, 0x55, 0x55, 0x55, 0x95, 0xaa, 0x56, 0x25, 0x09, 0x55, 0x85, 0xd4, 0x24, 0xa5, 0x42, 0x29, 0xb5, 0xaa, 0xaa, 0xaa, 0x52, 0x55, 0x07, 0x10, 0x55, 0x29, 0x28, 0x8a, 0x92, 0x88, 0x28, 0x44, 0x56, 0xb5, 0x55, 0x55, 0x55, 0xca, 0xaa, 0x42, 0xaa, 0x2b, 0x41, 0x3a, 0x25, 0x29, 0x82, 0x08, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x01, 0x14, 0xf5, 0x86, 0xa4, 0x52, 0x4a, 0x42, 0x29, 0x11, 0x5a, 0xab, 0xaa, 0xaa, 0xaa, 0x0a, 0xad, 0x40, 0xc4, 0x1f, 0x04, 0x87, 0x94, 0x14, 0x49, 0x22, 0x55, 0x55, 0xab, 0xaa, 0xaa, 0x52, 0x05, 0x95, 0xaa, 0x48, 0x51, 0x55, 0x29, 0x49, 0x22, 0x09, 0x56, 0x6d, 0xad, 0xaa, 0xaa, 0x06, 0xab, 0x30, 0xa8, 0x05, 0x0d, 0x5a, 0x29, 0x91, 0x08, 0x29, 0xb5, 0x55, 0x55, 0x55, 0xd5, 0x52, 0x85, 0x4a, 0xa5, 0x52, 0xa9, 0x0a, 0xa3, 0x24, 0x25, 0x44, 0x56, 0x55, 0xb5, 0xaa, 0xea, 0x84, 0x6b, 0x38, 0x4a, 0x04, 0x92, 0xd2, 0x48, 0x45, 0x48, 0x09, 0xb5, 0xd6, 0xaa, 0xaa, 0xbf, 0xd2, 0x64, 0x55, 0x3d, 0xd5, 0xaa, 0x8a, 0x8a, 0x28, 0x25, 0x24, 0x6a, 0xad, 0xaa, 0x55, 0xfb, 0x8a, 0x6b, 0xa8, 0x6a, 0x51, 0xaf, 0x12, 0x92, 0x45, 0xa4, 0x24, 0xab, 0xaa, 0x55, 0xd5, 0x6f, 0xf5, 0x84, 0xb2, 0x97, 0xac, 0x69, 0x43, 0x65, 0x29, 0x11, 0x11, 0xda, 0xaa, 0xb6, 0xaa, 0xfe, 0xb7, 0x5e, 0xaa, 0x2e, 0x69, 0xaf, 0x16, 0x8a, 0x23, 0x45, 0x22, 0xab, 0xad, 0xaa, 0x56, 0xab, 0x5a, 0xb7, 0xf4, 0xdb, 0xaa, 0xbf, 0x4a, 0xa8, 0x4a, 0x28, 0x09, 0xb6, 0xda, 0xaa, 0xaa, 0xfd, 0xdf, 0xad, 0x6d, 0xbf, 0xea, 0xff, 0x54, 0x92, 0x96, 0x22, 0x29, 0x55, 0xab, 0x56, 0x55, 0xd5, 0x75, 0x7f, 0xbb, 0xfb, 0xf7, 0xbf, 0x95, 0x28, 0x23, 0x89, 0x44, 0xdb, 0x5a, 0x6d, 0x55, 0xb5, 0xdf, 0x76, 0xeb, 0xff, 0x57, 0xaf, 0x5f, 0xb1, 0x26, 0x29, 0x11, 0x56, 0xd5, 0xaa, 0xad, 0x4a, 0x6b, 0xa9, 0x56, 0xfb, 0xef, 0xf5, 0xaa, 0x66, 0x95, 0x84, 0x44, 0xda, 0xb6, 0xaa, 0x6a, 0xb5, 0x4a, 0xab, 0x5a, 0xf5, 0x95, 0xb4, 0xfe, 0x56, 0x95, 0x94, 0x14, 0x55, 0x55, 0x5b, 0x55, 0x55, 0xb5, 0x54, 0xa5, 0x0a, 0x55, 0x49, 0xd5, 0x53, 0x4b, 0x12, 0x21, 0xdb, 0xd6, 0xaa, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0x6a, 0x95, 0x52, 0x92, 0x56, 0x92, 0x24, 0x25, 0xb6, 0xad, 0xb6, 0x56, 0x55, 0x55, 0x55, 0x55, 0x95, 0xa4, 0x8a, 0x54, 0xfb, 0xff, 0x57, 0x12, 0x55, 0xb5, 0xaa, 0x5a, 0xd5, 0xaa, 0x2a, 0x55, 0xa9, 0xaa, 0x54, 0x45, 0x82, 0x00, 0x84, 0x24, 0xad, 0xad, 0x55, 0xd5, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x94, 0x2a, 0xa9, 0xaa, 0xaa, 0x52, 0x12, 0xbb, 0x6a, 0x6d, 0xab, 0x5a, 0x55, 0x55, 0x95, 0x4a, 0xa5, 0xa4, 0x2a, 0x29, 0x49, 0x94, 0x24, 0x6a, 0x5b, 0x5b, 0xad, 0x55, 0x55, 0x55, 0xa9, 0xaa, 0x2a, 0x95, 0xa4, 0x92, 0x92, 0x22, 0x49, 0xd6, 0x56, 0xd5, 0xaa, 0xaa, 0x55, 0x55, 0x55, 0xaa, 0x54, 0x29, 0x95, 0x54, 0x54, 0x4a, 0x12 }; vigor-0.016.orig/vigor/v2cp0003.xcf0100664000076400007640000017163707103707232015315 0ustar cjw44cjw44gimp xcf file€€BB_€€ Backgroundÿ     €€&ó“€€B:Ôx*´êÛ¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇúÈÉÉÊËÌÌûÍÎÏÏÐÐÒÓÕ¯°î±²²³´´µµ¶··¸¹¹º¹º¼¼ý½¾¿¿ËÀÁÁÂÃÃÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÍÎÏÏÐÑÑÒÓÓÔÕÕ®¯¯°°±²²³´´µµ¶··¸¹¹º¼ý½¾¿¿áÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÏÏÐÐÑÒÒÓÓìÕ­®¯¯°°±²²³´´µµ¶··¸¹¹þº¼¼ý½¾¿¿íÀÁÁÂÃÃÄÄÅÅÆÇÇÈÉÉÊËÌÌûÍÎÏÏÐÐÒêÓÔ­­®¯¯°°±²²³´´µµ¶··¸¹¹º¼½¿ÀïÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËÌÌþÍÏÏéÐÒÑÒÒ¬­­®¯¯°°±²²³´´µµ¶··¹þº¼¼½¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉþËÌÌþÍÏÏÑìÒ«¬­­®¯¯°°±²²³´´µµ¶··¹º¼½¿ñÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉËÌþÎÏÏÐæÑÒ««¬­­®¯¯°°±²²³´´µµ¶¶··¸¹¹þº¼¼½¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉÊþËÌÌþÍÏÏÐâ˪««¬­­®¯¯°°±²²³´´µµ¶¶··¸¹¹ºº¼¼½¿÷ÀÁÁÂÂÃÄÄÆÆÇÉËÌÜÍÎÎÏ΋ªª««¬­­®¯¯°°±²²³´´µ´¶¶··¸¹¹ºº¼¼½¿ÀÁÂöÃÄÄÅÆÆÇÇÈÉÉäÊËËÌ̾p…Yh©ªª««¬­­®¯¯°°±²²³´´õµ¶¶··¸¹¹ºº¼¼½¿ûÀÁÁÂÃÃþÄÆÆÈÉäÇxttj6+(¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼½¿÷ÀÁÁÂÃÃÄÄÆÆà˜nfKBCB/#3+¨¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼ö½¾¾¿¿ÀÁÁÂÃÃÅü™^EBBäC@#C D>§¨¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼½û¾¿¿ÀÁÁÃú¼ƒGAABBâZ]9F]É̸¦§¨¨©ªª««¬­­®®¯°°±±²³³ô´µ¶¶··¸¹¹ºº¼¼½ö¾¿¿À¿ÁÃÃbAAÞG`wŵ–º¹ÊÉ­¦¦§¨¨©ªª««¬­­®®¯°°±±²³³û´µ¶¶··¹Ðº»¼¼½½¾·¨©¡ºh@@AE^‹ÅÇŨ µ¡Å³±¼¥¦¦§¨¨©ªª««¬­­®®¯°°ý±²³³´¶·Ì¸¹¹ºº¼»¼½µ˜ˆ€ƒ^(>ˆÂ´¸Åħº´¨¼¡®Ä¥¥¦¦§¨¨©©ª««¬­­®®¯°°ý±²³³´¶·û¸¹¹º»»Ó¼˜ŠŸ—£='—ª›¥Ÿ¤¹‰¦¾˜´­¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°ý±²³³É´µ¶¶··¸¹¹ºº»º¹½n????Bµ•–„¹°®‰´Š…’†¢££¤¤¥¦¦§¨¨©©ª««¬­­®®û¯°°±²²Ê³´µµ¶··¸¹¹›–šƒ“#,-?v‹°±±‡š¼§Ž”¥§¥‡ŽŠ¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±±²³³´µµ¶¶·¸·}‹š‘=-‚½À±µ”¼§…—¦³µ£¢–¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®û¯°°±²²Œ³´µµ¶¶·µ|‡§ºn=:„‹ƒ—«¿¨Œ²†œ¡¾²“¦Œ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯°°±²²³³´µµ¶·´…´³‰<70_±°¯–™°¯‰‚¸‡™¼•­¥‰ ¡¡¢££¤¤¥¦¦§¨¨©©ª««ñ¬­­®®¯°°±±²³³´µµ’z€Œ…J+%*I¥®¸§¢²Ž¬ŠŠƒ–‘¯ »˜„Ÿ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬­­®®¯°°±±²³³´µµz…ž‰g 88œ}‹Ÿ¨¥ˆ€Š¬žˆ¢£²‹ƒŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªªÃ«¬­­®®¯°°±±²³³´z€µµ¬H9„~†}}Š¥ƒ·¿€€…«»‹…žŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©Úª««¬­­®®¯°°±±²³‰y¬¶´Œ(z‡¡‚}…›”~Žž‰€€é²À–„žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©«¬®¯Ê°±±²²xy³´µ… w|}|‚„…—~‚ƒ~„É–ƒžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©Þ¥««¬¬®®¯¯°°±²yx³³§D" šˆ…‚Œ¡||}}~~æ‹…€€‚œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©«¬®¯°í©ª²x}m <œŽˆ‡|š¥‚||þ}~~€œìžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©«¬®¯±ïx‚¬y$ &‘‘ˆ•„†||þ}~~êHCD›œœžžŸŸ ¡¡¢££¤¤¥¦¦ý§¨©©ä«†©¬¬®®¯¯°yww”,Oz|ƒ”š||æ}^C#š›œœžžŸŸ ¡¡¢££¤¤¥¦¦ø§¨¨©©««¬¬ê­®¯zv¯§€|">yxyz†z{{û|x8šî›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦ý§¨©©«¬ì®|v¬§vx} 1xyz}|zzýy/뙚š›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦ý§¨©©«¬ð}Ÿ­˜v©Œp/(I{yxxyzýe;èFV™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦é§¨¨©©««§Š¦®x·¯‹g)! oxxûy{AEßSm|~˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦²§§¨©©î«~¡¬‰ª®§ul$1@lwxxÜz‹Q7An||}~—˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦ê§¨©|™Š¢¬¬¦utug[xwwx÷¢¡OL ;x{||æ}——˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦ñ§¨©~œ««{t…¥tn.ýHvvów}£ÆWS>9uzz{||æ–——˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦í§¨}œ©}s¡t‚…p@07vvÖwŽÉÈ\QL`·Šzz{||•–——˜˜™šš›œœžŸŸ ®¡¢¢££¤¥¦¦ç§}¤r£«t­‡u.#6tvv‚²ÉrSSÃo¯’†zz{{••–——˜˜™šš›œœžŸŸ  ¡¢¢££¤¥¥¦¦§~rž©•tª¢l quvˆ]SSÛjfT¢–…z{”••–——˜˜™šš›œœžŸŸ  ¡¢¢££¤¥¦¦}Ì¡©v¨œrm5 kuulWS[}˜­S`e³‰~“”••–——˜˜™šš›œœžŸŸ  ¢Ã£‚ž¥¦–wš¨¨v§r”–H ce@SeýýþêÐØuXžœ““”••–——˜˜™šš›œœžŸŸ  á¡¢££¤¥{pš•¥vr©šR%G+jµùýþýýçéïüXžËÌ’““”••–——˜˜™šš›œœŸ ä¡¢¢££¤zo¤¥vqq¨¨ŸD  4Úþýýè÷mbÅÌ’’““”••–——˜˜™šš›œœŸ í¡¢¢£®|o|Žtp§šur7÷ bÅüýýþþýýåûýüÙe Ì‘’’““”••–——˜˜™šš›œœŸ ¢Ã £ xopžp|£rD J©²ùþþƒkÆ­»²_`˜‘’’““”••–——˜˜™šš›œœœŸŸ  ¢£êxoop§„sEXª±÷þý‰SSâY$¥¯¬t6M‘’’““”••–——˜˜™šš›œœŸ ¢£ìvn¦™pl[! ( sªª°óý‘SSéRB!ª¡hJ‘’’““”••–—˜˜þ™ššý›œŸ év£¦unnŽnŒŸ`xª«¯ëæ¢SSäQ@+¯¤pŠŽ‘’’““”••–v—˜˜™ššý›œŸè ›¡8. ›˜['l©«ª­âì¸SSãQGI¸ÂªouŽŽ‘’’““”••–——˜˜™ššø›œlšŸŸ  ë\5rqa?9u/#Z¥««ªªÊñÅSSãPgÊ̳tŽŽ‘’’““”••––—˜˜™ššþ›Ÿïs—Zr¢on“@05¢«ªªÛ¶ÔÍ©ZWadªª‰EvŽŽ‘’’““”••––—˜˜™ššý›œÆq—q˜ pm­mˆ4''X ««ªª«²âÚÌÙ«ªª«\ AuŒŽŽ‘’’““”••––——˜™ššé›œªr—Ÿ  oŸ¡—mjA8Ÿ¥ª««Úª«²¸°ª«ªªŸ_tt‹ŒŽŽ‘’’““”••––——˜™ššç›œn—ŸŸp{Ÿ l‹sB*:Dª««³ªªÝ«ª««ªett‹‹ŒŽŽ‘‘’““”••––——˜™ššŠm—žoœ |u”oQ?I†°Ë«« ©ªª«ArstŠ‹‹ŒŽŽ‘‘’““”••––——˜™šš¨}˜ªq›l †”T xO!‚'Z84qrrs‰Š‹‹ŒŽŽ‘‘’““””–—㘙šŠj–œn—žlž–w‹O)%Bå,`pqqrr‰‰Š‹‹ŒŒŽŽ‘‘’““””–—˜†™Š™››o™l|jƒJ#  &—b(ooppqrrˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––——˜˜{—š™n˜l©jrž‘D *\\s­ª5;nooppqqˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””–—Üj–š™l—njzŸŸ‘C ,(jlv¯°^ HnnooppqÛ¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇúÈÉÉÊËÌÌûÍÎÏÏÐÐÒÓÕ¯°î±²²³´´µµ¶··¸¹¹º¹º¼¼ý½¾¿¿ËÀÁÁÂÃÃÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÍÎÏÏÐÑÑÒÓÓÔÕÕ®¯¯°°±²²³´´µµ¶··¸¹¹º¼ý½¾¿¿áÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÏÏÐÐÑÒÒÓÓìÕ­®¯¯°°±²²³´´µµ¶··¸¹¹þº¼¼ý½¾¿¿íÀÁÁÂÃÃÄÄÅÅÆÇÇÈÉÉÊËÌÌûÍÎÏÏÐÐÒêÓÔ­­®¯¯°°±²²³´´µµ¶··¸¹¹º¼½¿ÀïÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËÌÌþÍÏÏéÐÒÑÒÒ¬­­®¯¯°°±²²³´´µµ¶··¹þº¼¼½¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉþËÌÌþÍÏÏÑìÒ«¬­­®¯¯°°±²²³´´µµ¶··¹º¼½¿ñÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉËÌþÎÏÏÐæÑÒ««¬­­®¯¯°°±²²³´´µµ¶¶··¸¹¹þº¼¼½¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉÊþËÌÌþÍÏÏÐâ˪««¬­­®¯¯°°±²²³´´µµ¶¶··¸¹¹ºº¼¼½¿÷ÀÁÁÂÂÃÄÄÆÆÇÉËÌÜÍÎÎÏ΋ªª««¬­­®¯¯°°±²²³´´µ´¶¶··¸¹¹ºº¼¼½¿ÀÁÂöÃÄÄÅÆÆÇÇÈÉÉäÊËËÌ̾p…Yh©ªª««¬­­®¯¯°°±²²³´´õµ¶¶··¸¹¹ºº¼¼½¿ûÀÁÁÂÃÃþÄÆÆÈÉäÇxttj6+(¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼½¿÷ÀÁÁÂÃÃÄÄÆÆà˜nfKBCB/#3+¨¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼ö½¾¾¿¿ÀÁÁÂÃÃÅü™^EBBäC@#C D>§¨¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼½û¾¿¿ÀÁÁÃú¼ƒGAABBâZ]9F]É̸¦§¨¨©ªª««¬­­®®¯°°±±²³³ô´µ¶¶··¸¹¹ºº¼¼½ö¾¿¿À¿ÁÃÃbAAÞG`wŵ–º¹ÊÉ­¦¦§¨¨©ªª««¬­­®®¯°°±±²³³û´µ¶¶··¹Ðº»¼¼½½¾·¨©¡ºh@@AE^‹ÅÇŨ µ¡Å³±¼¥¦¦§¨¨©ªª««¬­­®®¯°°ý±²³³´¶·Ì¸¹¹ºº¼»¼½µ˜ˆ€ƒ^(>ˆÂ´¸Åħº´¨¼¡®Ä¥¥¦¦§¨¨©©ª««¬­­®®¯°°ý±²³³´¶·û¸¹¹º»»Ó¼˜ŠŸ—£='—ª›¥Ÿ¤¹‰¦¾˜´­¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°ý±²³³É´µ¶¶··¸¹¹ºº»º¹½n????Bµ•–„¹°®‰´Š…’†¢££¤¤¥¦¦§¨¨©©ª««¬­­®®û¯°°±²²Ê³´µµ¶··¸¹¹›–šƒ“#,-?v‹°±±‡š¼§Ž”¥§¥‡ŽŠ¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±±²³³´µµ¶¶·¸·}‹š‘=-‚½À±µ”¼§…—¦³µ£¢–¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®û¯°°±²²Œ³´µµ¶¶·µ|‡§ºn=:„‹ƒ—«¿¨Œ²†œ¡¾²“¦Œ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯°°±²²³³´µµ¶·´…´³‰<70_±°¯–™°¯‰‚¸‡™¼•­¥‰ ¡¡¢££¤¤¥¦¦§¨¨©©ª««ñ¬­­®®¯°°±±²³³´µµ’z€Œ…J+%*I¥®¸§¢²Ž¬ŠŠƒ–‘¯ »˜„Ÿ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬­­®®¯°°±±²³³´µµz…ž‰g 88œ}‹Ÿ¨¥ˆ€Š¬žˆ¢£²‹ƒŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªªÃ«¬­­®®¯°°±±²³³´z€µµ¬H9„~†}}Š¥ƒ·¿€€…«»‹…žŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©Úª««¬­­®®¯°°±±²³‰y¬¶´Œ(z‡¡‚}…›”~Žž‰€€é²À–„žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©«¬®¯Ê°±±²²xy³´µ… w|}|‚„…—~‚ƒ~„É–ƒžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©Þ¥««¬¬®®¯¯°°±²yx³³§D" šˆ…‚Œ¡||}}~~æ‹…€€‚œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©«¬®¯°í©ª²x}m <œŽˆ‡|š¥‚||þ}~~€œìžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©«¬®¯±ïx‚¬y$ &‘‘ˆ•„†||þ}~~êHCD›œœžžŸŸ ¡¡¢££¤¤¥¦¦ý§¨©©ä«†©¬¬®®¯¯°yww”,Oz|ƒ”š||æ}^C#š›œœžžŸŸ ¡¡¢££¤¤¥¦¦ø§¨¨©©««¬¬ê­®¯zv¯§€|">yxyz†z{{û|x8šî›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦ý§¨©©«¬ì®|v¬§vx} 1xyz}|zzýy/뙚š›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦ý§¨©©«¬ð}Ÿ­˜v©Œp/(I{yxxyzýe;èFV™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦é§¨¨©©««§Š¦®x·¯‹g)! oxxûy{AEßSm|~˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦²§§¨©©î«~¡¬‰ª®§ul$1@lwxxÜz‹Q7An||}~—˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦ê§¨©|™Š¢¬¬¦utug[xwwx÷¢¡OL ;x{||æ}——˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦ñ§¨©~œ««{t…¥tn.ýHvvów}£ÆWS>9uzz{||æ–——˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦í§¨}œ©}s¡t‚…p@07vvÖwŽÉÈ\QL`·Šzz{||•–——˜˜™šš›œœžŸŸ ®¡¢¢££¤¥¦¦ç§}¤r£«t­‡u.#6tvv‚²ÉrSSÃo¯’†zz{{••–——˜˜™šš›œœžŸŸ  ¡¢¢££¤¥¥¦¦§~rž©•tª¢l quvˆ]SSÛjfT¢–…z{”••–——˜˜™šš›œœžŸŸ  ¡¢¢££¤¥¦¦}Ì¡©v¨œrm5 kuulWS[}˜­S`e³‰~“”••–——˜˜™šš›œœžŸŸ  ¢Ã£‚ž¥¦–wš¨¨v§r”–H ce@SeýýþêÐØuXžœ““”••–——˜˜™šš›œœžŸŸ  á¡¢££¤¥{pš•¥vr©šR%G+jµùýþýýçéïüXžËÌ’““”••–——˜˜™šš›œœŸ ä¡¢¢££¤zo¤¥vqq¨¨ŸD  4Úþýýè÷mbÅÌ’’““”••–——˜˜™šš›œœŸ í¡¢¢£®|o|Žtp§šur7÷ bÅüýýþþýýåûýüÙe Ì‘’’““”••–——˜˜™šš›œœŸ ¢Ã £ xopžp|£rD J©²ùþþƒkÆ­»²_`˜‘’’““”••–——˜˜™šš›œœœŸŸ  ¢£êxoop§„sEXª±÷þý‰SSâY$¥¯¬t6M‘’’““”••–——˜˜™šš›œœŸ ¢£ìvn¦™pl[! ( sªª°óý‘SSéRB!ª¡hJ‘’’““”••–—˜˜þ™ššý›œŸ év£¦unnŽnŒŸ`xª«¯ëæ¢SSäQ@+¯¤pŠŽ‘’’““”••–v—˜˜™ššý›œŸè ›¡8. ›˜['l©«ª­âì¸SSãQGI¸ÂªouŽŽ‘’’““”••–——˜˜™ššø›œlšŸŸ  ë\5rqa?9u/#Z¥««ªªÊñÅSSãPgÊ̳tŽŽ‘’’““”••––—˜˜™ššþ›Ÿïs—Zr¢on“@05¢«ªªÛ¶ÔÍ©ZWadªª‰EvŽŽ‘’’““”••––—˜˜™ššý›œÆq—q˜ pm­mˆ4''X ««ªª«²âÚÌÙ«ªª«\ AuŒŽŽ‘’’““”••––——˜™ššé›œªr—Ÿ  oŸ¡—mjA8Ÿ¥ª««Úª«²¸°ª«ªªŸ_tt‹ŒŽŽ‘’’““”••––——˜™ššç›œn—ŸŸp{Ÿ l‹sB*:Dª««³ªªÝ«ª««ªett‹‹ŒŽŽ‘‘’““”••––——˜™ššŠm—žoœ |u”oQ?I†°Ë«« ©ªª«ArstŠ‹‹ŒŽŽ‘‘’““”••––——˜™šš¨}˜ªq›l †”T xO!‚'Z84qrrs‰Š‹‹ŒŽŽ‘‘’““””–—㘙šŠj–œn—žlž–w‹O)%Bå,`pqqrr‰‰Š‹‹ŒŒŽŽ‘‘’““””–—˜†™Š™››o™l|jƒJ#  &—b(ooppqrrˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––——˜˜{—š™n˜l©jrž‘D *\\s­ª5;nooppqqˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””–—Üj–š™l—njzŸŸ‘C ,(jlv¯°^ HnnooppqÛ¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇúÈÉÉÊËÌÌûÍÎÏÏÐÐÒÓÕ¯°î±²²³´´µµ¶··¸¹¹º¹º¼¼ý½¾¿¿ËÀÁÁÂÃÃÄÅÅÆÆÇÇÈÉÉÊËËÌÌÍÍÎÏÏÐÑÑÒÓÓÔÕÕ®¯¯°°±²²³´´µµ¶··¸¹¹º¼ý½¾¿¿áÀÁÁÂÃÃÄÄÅÆÆÇÇÈÈÉÊËËÌÌÍÎÏÏÐÐÑÒÒÓÓìÕ­®¯¯°°±²²³´´µµ¶··¸¹¹þº¼¼ý½¾¿¿íÀÁÁÂÃÃÄÄÅÅÆÇÇÈÉÉÊËÌÌûÍÎÏÏÐÐÒêÓÔ­­®¯¯°°±²²³´´µµ¶··¸¹¹º¼½¿ÀïÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËÌÌþÍÏÏéÐÒÑÒÒ¬­­®¯¯°°±²²³´´µµ¶··¹þº¼¼½¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉþËÌÌþÍÏÏÑìÒ«¬­­®¯¯°°±²²³´´µµ¶··¹º¼½¿ñÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉËÌþÎÏÏÐæÑÒ««¬­­®¯¯°°±²²³´´µµ¶¶··¸¹¹þº¼¼½¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉÊþËÌÌþÍÏÏÐâ˪««¬­­®¯¯°°±²²³´´µµ¶¶··¸¹¹ºº¼¼½¿÷ÀÁÁÂÂÃÄÄÆÆÇÉËÌÜÍÎÎÏ΋ªª««¬­­®¯¯°°±²²³´´µ´¶¶··¸¹¹ºº¼¼½¿ÀÁÂöÃÄÄÅÆÆÇÇÈÉÉäÊËËÌ̾p…Yh©ªª««¬­­®¯¯°°±²²³´´õµ¶¶··¸¹¹ºº¼¼½¿ûÀÁÁÂÃÃþÄÆÆÈÉäÇxttj6+(¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼½¿÷ÀÁÁÂÃÃÄÄÆÆà˜nfKBCB/#3+¨¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼ö½¾¾¿¿ÀÁÁÂÃÃÅü™^EBBäC@#C D>§¨¨©ªª««¬­­®¯¯°°±²²³³ô´µ¶¶··¸¹¹ºº¼¼½û¾¿¿ÀÁÁÃú¼ƒGAABBâZ]9F]É̸¦§¨¨©ªª««¬­­®®¯°°±±²³³ô´µ¶¶··¸¹¹ºº¼¼½ö¾¿¿À¿ÁÃÃbAAÞG`wŵ–º¹ÊÉ­¦¦§¨¨©ªª««¬­­®®¯°°±±²³³û´µ¶¶··¹Ðº»¼¼½½¾·¨©¡ºh@@AE^‹ÅÇŨ µ¡Å³±¼¥¦¦§¨¨©ªª««¬­­®®¯°°ý±²³³´¶·Ì¸¹¹ºº¼»¼½µ˜ˆ€ƒ^(>ˆÂ´¸Åħº´¨¼¡®Ä¥¥¦¦§¨¨©©ª««¬­­®®¯°°ý±²³³´¶·û¸¹¹º»»Ó¼˜ŠŸ—£='—ª›¥Ÿ¤¹‰¦¾˜´­¤¥¥¦¦§¨¨©©ª««¬­­®®¯°°ý±²³³É´µ¶¶··¸¹¹ºº»º¹½n????Bµ•–„¹°®‰´Š…’†¢££¤¤¥¦¦§¨¨©©ª««¬­­®®û¯°°±²²Ê³´µµ¶··¸¹¹›–šƒ“#,-?v‹°±±‡š¼§Ž”¥§¥‡ŽŠ¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±±²³³´µµ¶¶·¸·}‹š‘=-‚½À±µ”¼§…—¦³µ£¢–¡¢££¤¤¥¦¦§¨¨©©ª««¬­­®û¯°°±²²Œ³´µµ¶¶·µ|‡§ºn=:„‹ƒ—«¿¨Œ²†œ¡¾²“¦Œ¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯°°±²²³³´µµ¶·´…´³‰<70_±°¯–™°¯‰‚¸‡™¼•­¥‰ ¡¡¢££¤¤¥¦¦§¨¨©©ª««ñ¬­­®®¯°°±±²³³´µµ’z€Œ…J+%*I¥®¸§¢²Ž¬ŠŠƒ–‘¯ »˜„Ÿ ¡¡¢££¤¤¥¦¦§¨¨©©ªª««¬­­®®¯°°±±²³³´µµz…ž‰g 88œ}‹Ÿ¨¥ˆ€Š¬žˆ¢£²‹ƒŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ªªÃ«¬­­®®¯°°±±²³³´z€µµ¬H9„~†}}Š¥ƒ·¿€€…«»‹…žŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©Úª««¬­­®®¯°°±±²³‰y¬¶´Œ(z‡¡‚}…›”~Žž‰€€é²À–„žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©«¬®¯Ê°±±²²xy³´µ… w|}|‚„…—~‚ƒ~„É–ƒžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©Þ¥««¬¬®®¯¯°°±²yx³³§D" šˆ…‚Œ¡||}}~~æ‹…€€‚œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©«¬®¯°í©ª²x}m <œŽˆ‡|š¥‚||þ}~~€œìžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©«¬®¯±ïx‚¬y$ &‘‘ˆ•„†||þ}~~êHCD›œœžžŸŸ ¡¡¢££¤¤¥¦¦ý§¨©©ä«†©¬¬®®¯¯°yww”,Oz|ƒ”š||æ}^C#š›œœžžŸŸ ¡¡¢££¤¤¥¦¦ø§¨¨©©««¬¬ê­®¯zv¯§€|">yxyz†z{{û|x8šî›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦ý§¨©©«¬ì®|v¬§vx} 1xyz}|zzýy/뙚š›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦ý§¨©©«¬ð}Ÿ­˜v©Œp/(I{yxxyzýe;èFV™™šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦é§¨¨©©««§Š¦®x·¯‹g)! oxxûy{AEßSm|~˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦²§§¨©©î«~¡¬‰ª®§ul$1@lwxxÜz‹Q7An||}~—˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦ê§¨©|™Š¢¬¬¦utug[xwwx÷¢¡OL ;x{||æ}——˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦ñ§¨©~œ««{t…¥tn.ýHvvów}£ÆWS>9uzz{||æ–——˜™™šš›œœžŸŸ ¡¡¢¢££¤¥¦¦í§¨}œ©}s¡t‚…p@07vvÖwŽÉÈ\QL`·Šzz{||•–——˜˜™šš›œœžŸŸ ®¡¢¢££¤¥¦¦ç§}¤r£«t­‡u.#6tvv‚²ÉrSSÃo¯’†zz{{••–——˜˜™šš›œœžŸŸ  ¡¢¢££¤¥¥¦¦§~rž©•tª¢l quvˆ]SSÛjfT¢–…z{”••–——˜˜™šš›œœžŸŸ  ¡¢¢££¤¥¦¦}Ì¡©v¨œrm5 kuulWS[}˜­S`e³‰~“”••–——˜˜™šš›œœžŸŸ  ¢Ã£‚ž¥¦–wš¨¨v§r”–H ce@SeýýþêÐØuXžœ““”••–——˜˜™šš›œœžŸŸ  á¡¢££¤¥{pš•¥vr©šR%G+jµùýþýýçéïüXžËÌ’““”••–——˜˜™šš›œœŸ ä¡¢¢££¤zo¤¥vqq¨¨ŸD  4Úþýýè÷mbÅÌ’’““”••–——˜˜™šš›œœŸ í¡¢¢£®|o|Žtp§šur7÷ bÅüýýþþýýåûýüÙe Ì‘’’““”••–——˜˜™šš›œœŸ ¢Ã £ xopžp|£rD J©²ùþþƒkÆ­»²_`˜‘’’““”••–——˜˜™šš›œœœŸŸ  ¢£êxoop§„sEXª±÷þý‰SSâY$¥¯¬t6M‘’’““”••–——˜˜™šš›œœŸ ¢£ìvn¦™pl[! ( sªª°óý‘SSéRB!ª¡hJ‘’’““”••–—˜˜þ™ššý›œŸ év£¦unnŽnŒŸ`xª«¯ëæ¢SSäQ@+¯¤pŠŽ‘’’““”••–v—˜˜™ššý›œŸè ›¡8. ›˜['l©«ª­âì¸SSãQGI¸ÂªouŽŽ‘’’““”••–——˜˜™ššø›œlšŸŸ  ë\5rqa?9u/#Z¥««ªªÊñÅSSãPgÊ̳tŽŽ‘’’““”••––—˜˜™ššþ›Ÿïs—Zr¢on“@05¢«ªªÛ¶ÔÍ©ZWadªª‰EvŽŽ‘’’““”••––—˜˜™ššý›œÆq—q˜ pm­mˆ4''X ««ªª«²âÚÌÙ«ªª«\ AuŒŽŽ‘’’““”••––——˜™ššé›œªr—Ÿ  oŸ¡—mjA8Ÿ¥ª««Úª«²¸°ª«ªªŸ_tt‹ŒŽŽ‘’’““”••––——˜™ššç›œn—ŸŸp{Ÿ l‹sB*:Dª««³ªªÝ«ª««ªett‹‹ŒŽŽ‘‘’““”••––——˜™ššŠm—žoœ |u”oQ?I†°Ë«« ©ªª«ArstŠ‹‹ŒŽŽ‘‘’““”••––——˜™šš¨}˜ªq›l †”T xO!‚'Z84qrrs‰Š‹‹ŒŽŽ‘‘’““””–—㘙šŠj–œn—žlž–w‹O)%Bå,`pqqrr‰‰Š‹‹ŒŒŽŽ‘‘’““””–—˜†™Š™››o™l|jƒJ#  &—b(ooppqrrˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––——˜˜{—š™n˜l©jrž‘D *\\s­ª5;nooppqqˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””–—Üj–š™l—njzŸŸ‘C ,(jlv¯°^ Hnnooppq$þýúþýýþýþþþýþþþýþþþýþþüýþþýýþûýþýýþþýûþýþýþþþýþ þýþýýþýýþýüþýýþþùýþýþþýþþýþýþýþýýþýýþþýþþþýþ þýýþýýþýþýþþýýþþýþþûýþýýþþýþýþûýþýýþþýþþýýþýþýþýþýþýýþýýþýþþýþþþýþþþýþþýþýõþýþýýþýþýýþþúýþþýýþþþýþþüýþýþþþýþþýþýþýúþýþýýþþûýþþýþþþýþþýþþýýöþýþþýýþýþýýþþýýýþýþþþýþ þýþýþýþýþþýþþþýþþöýþýþþýþýýþþüýþþýýþýýþýþþþýþþþýþþüýþþýýþ ýþ ýþþýþ þúýþýýþýýúþýýþþýýþýþþýþþþýþþþýþþý÷þýýþýýþþýýúüýýþýþþþýþ þþýþþýþþýýþþýýùþýþýþýþþøýþýþýþýþþýýþýýþýþþýýýþýþþüýþýþ þýþýþýþýþùýþýþþýþþþýþþýþüýþþýýþùýþþýýþýýþþýþþþýþþüýþýþþýüþýýþþýýþýýþý'þýþýõþýýþþýýþýýþþûýþþýþþýýþýýþþýýþýþýýþýþþþýþþþýþþþýþþþýþþþýþþýþùýþýþþýþþýüþýýþþþýþþþýþþýûþýþþýýýþýþþþýþþýþûýþþýþþýýþýýþþýýþþýþþ÷ýþþýýþýýþþüýþýþþýþýþýýþýþþýøþýþýþýýþþþýþþýþþýþþûýþýýþþüýþþýýþýýþýþþýþøýþþýþþýþþýüþýþýýþþýýþýýþýý þþýþþýþøýþþýýþþýýþþýýþþýþþþýþþúýþþýþýýüþýýþþþýþþüýþýþþüýþýþþýýþýþþýþþýþþüýþýþþþýþþýýþýýþýþýþýþýþûýþþýþþýþýûþýýþýýýþýþþýþýþþýþþþýþþýþýþýþýýþýýþþýþþþýþþûýþþýþþýþ÷ýþþýþýþþýýþþýý%þýûþýýþýýþþýýþýþþýþþþýþ þýþþýýþþýýþýþþýýüþýýþþüýþýþþüýþýþþýúþýþýýþþýúþýþýýþþýýþýþþþýþþýþýþüýþþýýþþýýþþýþþþýþþýýþýýþýþûýþýþýýþþýþþþýþþüýþþýýþýûþýýþýýþþýþþþýþþþýþ þûýþýþýýþùýþþýþþýýúþýþþýþþþýþþýþýøþýþýýþþýýþýþþýþþþýþþûýþýþýýþ ýþþýýþþýþþüýþýþþýþþýýþþýýõþýþýþýþþýýþþöýþþýþþýþýþþþýþþýüþýþýýùþýþýýþýýüþýþýý$þýþýþýýþýýþþýþþþýþþ÷ýþþýþýþýþþóýþþýþþýþýýþþýýþýþýþýþùýþþýþýþþýþúýþýþýþþýþýþþýýþþýþþýþúýþþýýþþýñþýþýýþýýþýýþþýþþýýþýýþþýþ þýýþýýûþýýþýýüþýýþþúýþýþýþþüýþýþþýýþýýüþýþýýþýüþýýþþýþýþýþýþþýýþýþþýýþüýþþýýþýþýþýþýýþýþþøýþþýýþýþþýþþýýþþýýþýýþýþþýþüýþþýýþýôþýýþþýþýþýýþ þýþòýþþýýþýýþýýþýþþþýþþýþýþþýþþûýþþýþþüýþþýýþþýýþúýþþýýþþýþþýýþýüþýýþþüýþþýýûþýþþýýýþýþþûýþýýþþýýþýþþýþýþýþýüþýýþþýüþýþýýþýþþýþþýþöýþþýýþþýþýýþýþþýýýþýþþýþþýýýþýþþýþþýýþöýþýýþþýýþýýþþýþþýýþýýþþýýùþýþþýýþþýþýþýþþýýýþýþþýþþýþþýþýþýþþýýþýþþýþþýþýýþýýüþýýþþþÖØØþÙÛÛÜÞßáâäþåççèêëíýîïððçñòóóôõõö÷÷øùùúúûüüýýøÕÖ×ØØýÙÚÛÛþÜÞÞþßááâäÔåæççèèéêêëëìííîïïððñòòôôõõö÷÷øùùúúûüüýøÕÕÖ×ØØýÙÚÛÛþÝÞÞþßááâäþåææèßéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüüøÕÕýÖ×ØØÚÛýÜÝÞÞþàááâäÁåææçèèéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüøÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßÝÜÞááâääðåææçèèéêêëëìííîïïìðòòóôôõõö÷÷øøùúúûøÒÔÔÖý×ØÙÙþÚÜÜÉÝÙØËÌŸ¬½Øääååææçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúúøν·ËÔÕÖÖ­ØÙÙÏÉËÍÍÌŸ¤ª¹À¢Ä×ãäååææççèéêêëëìííîïïðñòòóôôõõö÷÷øøùúø¹›ž¾ÓÕÕÖÖ××Ϫ‘‘“¥½ÄÌÜßÚÁ¾ ÈããåæÛçèèéêêëëìííîïððñòòóóôõõö÷÷øøùø•ÆËŽ¶ÔÕÕËת’ÁÐÏÐÖÛÜÜÝßÚÔ¼œÏâããäååææççèéêêëëìííîïððñòòóóôõõö÷÷øø𧢌‡‘¢ÀÕ ‘ÈÔØØÚÚÆÛÖØÜÞׯ¡Ôáâããäååææçèèéêêëëìííïïððñòòóóôõõö÷÷øø+$$%)”–Š´×׆ØÕμ­ÂÚÝÝϦ§Öáââããäååææçèèéêêëëìíîîïððñòòóóôõõö÷÷ø%1$D-L¿ÇËѾž¢ÈÚÚØÚÅ£©×àááâããäååææçèèéêêëëìíîîïððñòòóóôõõö÷ø!CD3¦FMTyÇÙÚÙÖÙÖ²©¿Ùßààáâããäååææççèéêêëëííîîïððñòòóóôõõöø¾º€­ŠZ2 774K‰ÁØØÙÑ¥ÀÛÞÞààááâããäååÁæçèèééêëìííîîïððñòòóóôõõøÌß•“‚l}š•z#=HHXµÙÙ°—¢½ÁØÝßààááâããäååÙæçèèééêëìííîîïððñòòóóôõøÇ•¡°¥‘¦Çѳ‚c0HH€O晓—¢£™¬Üßààááâããäååææçèèééëëìííîîïððñòòóóôø› œ¢É£œ¢¶ÏÊÉŸ}›NB1'”–£’““•”˜Üßààááâããääåææçèèéêëëìííîîïððñòòóóø•£§½¢Ã·š»‹ŒŒyky¾•‘œÄÔÈ—•–Øààááâããääåææçèèéêëëìííîîïððñòòóø¡¤·®‰Œ¼²Š½ÊÈŒŽvhN”­˜²ÙÙÛÚ•–¦ØààáââããääåææçèééêëëìííîîïððñòòøÀ‡‡ˆº¤¡Æ‰­ÏÐÀ¹Œ{;<3‰¬–ªÕÛÛÜÝÜÝßßààáââããäååææçèééêëëìííîîïððñòø¯††´Œ–Ž› ¨±°œ‹©‘ˆP P™’¢ÑÚÛÛÜܹÕÝßààáââããääåææèèééêëëìííîîïððñøˆœ°ˆ•‘Œ‰‹‹Šœ¨—“]VŒœ¼ÈÚÖ“”–—ÙÞßààáââããääåæçèèééêëëìííîîïððøˆ‹­™¬““Šˆ‰‘‰‰Ž”ŽŒx3,%[•£³Ò¢“ØÚ™¶ÜÞßààáââããäååæçèèééêëëìííîîïðø… ¤¨“Œ‡ˆ¯Š½ÐɘŠR­•—œ‘“ÕÚÙŘÛÞÞßààáââÍãäåææçèèééêëëìííîîïø„Œ™—ž‡ŠˆˆºÍο̘•…+4 '¢“£‘‘’Ù““µ•––ÜÞßààáââããäåææçèèééêëëììíîîø…‹‡……†ˆÆ‡‡‘ž˜œŸŽ”³•o&'¥Õµš‘‘’ÓÙ“³Û••ÝÞßààáââæãäåææçèèééêëëììíîøš¿œ„ŒŠŒ‡‡‰œ“ŒŠ‹“¾˜quбגØÚ“ÄÛÜ•ÝÝßßààáâããääåææçèèééêëëììíø£Ä’„……‰‹‹‰‘Œˆ‰‰–‹‹x0oœ¼”•‘•Ò˜ÚÚÕ˜ÝÝÞßßààáââããþåææýçèééëìðø—”ƒƒ„†ˆ‰Š’Œˆˆ‰‰Šìx4SbÍ˯……ìƒ"- &©Î̼’‹ÅÇÌ¡µÔÕÕöÖ×Õ°ÀÙÚÜÜÝÝßàöáââããäåø}~~Ý€€|TFR_aÎÄÍŠ„{,'–œÀ–‹‹Ž™Å˜ÇÓÔÕÕþÖ××úƧÚÜÜÝÝßàáÇâããäø||}~~ƒ£·WSSyÏÓÈ°b-!z¦›§¶¥ª¨¯ÐÒÓÔÕÕÖÖ×ØØÙÚÚÜÜÝÝßàðáââããø||}~~Žª­ºSSßvÎ}M & #„½—È®º•“¶ÑÒÃËÔÕÕÖÖ×ØÙÚÚÜÝßàÊáââãø{||ŒŸ [ScrrsuUSX6.0(|±¤Å£ÈŠ“ÂÍÐÄ©¾ÓÔÕÕÖÖ×ØÙÚÚÜÝßàÊáââøz€ˆ•®¥cWÌþýþä†kB@ ${‹¿œÃŽ©ÏÐÐÑÑÒÒÔÔÕÕÖÖ×ØÙÚÚýÛÜÝÝßàôâøÅÀ¾ÂºsV¶þýýáþýýòžM%, Œ‘½–ŠªÅÎÏÐÐÑÑÒÒÓÕÕúÖ××ØÙÚÚÜÝßà÷øÍÍÎË£Sºýýþþýþþäü±6  n‹“³ˆ¢ÉÍÍÎÎÐÐÑÒÑÏÒÕÕþÖ××þÙÚÚÜÝßàðøŸ˜¢Éowøþý¬ª¨¨Øýýðà’ #p‰—˜¡ÊÌÍÍÎÐøÌÄÌÓÔÕÖ××ýØÙÚÚýÛÜÝÝßôàø\‹i“PÃüý€SSêi‹ÕþþûØ?'‹ˆ’ÈÊÊÌÍÍÎÐ÷ÑÒÒÓÓÔÕÖ××ýØÙÚÚýÛÜÝÝßõø“ˆ`7ÊýÜZSSêgÒþýüÛB(’•Œ·ÊÊÁ·ÌÍÍÎõÏÐÑÒÒÓÓÔÕÖ××ýØÙÚÚýÛÜÝÝôßø–‡e4ÏüÞUSSéiáþýýû¥c -£¢”µÊ·›¯ÊËÍÍÎýÏÐÒÒúÓÔÔÕÖ××ýØÙÚÚýÛÜÝÝöø¦™x[2ÓúâSSýgìþþíç£l<ž­–“Œ‰–»ÊÊËÍÍÞÎÏÏÐÒÑÒÓÔÔÕÖÖ××ØÙÙÚÚÛÜÝÝøwyxd-ÖùéSSÃaòþþû± d czsG7]x£ÊÊËÌÍÎÎÏÏÐÑÒÒÓÔÔÕÖÖ××ØÙÙÚÚÛÜÝøwxwg%Y÷ö¿ZZýYüýýÖñ¬^ =3GQWB=sÂÊËÌÍÎÏÏÍÊÐÑÓÓÔÔÕÕÖ××ØÙÚÚôÛÜøvwwzHLíþýýþþýýêìx]ZB6L[mƒ£Ÿ‚\cÀÊÊÌÌñÎ̺˜¸ÑÑÓÓÔÔÕÖÖ××þÙÚÚñÛøvvwrAjÆâüýþýýäå¿\*Kƒª‹°ÆÆDz~¿ÊÊËÌÌÍÍÏÏÐÐÑÑÓÓÔÔÕÕÖ××ØÙÙÚÚøuvvwd(y°ó÷þþÃĉ\+I–žÂÄÆÆ𢆋½ÉÊÊËÌÌÍÎÎÏÐÑÑÓÔôÕÖÖ××ØÙÚÚøtvvötZ!Ms{„~SSß) |“–³ÄÄ»²¡£ÇÇÈÉÊÊËÌÌÍÎÎÏÐÑÑÓÔîÕÖÖ××ØÙÙøtuvvwjZUé=Dh8  "|¤Ž›¢¢‹‹´ÇÇûÈÉÉËÌÌúÍÎÎÐÐÑÑÓÔÕðÖ××ØÙøttuvvwxjaøMl…|vGò[€ £‹ƒ„´ÄÅÆÇÇûÈÉÉËÌÌúÍÎÎÏÐÑÑÓÔÙÕÖÖ××ØøsttuvvwxtO{{|zXL K¥‹¬Žƒ¨ÄÄúÅÆÇÇÈÉÉþÊÌÌúÍÎÎÐÐÑÑÓÔÚÕÖÖ××ørsttuvvwf-z{{xS k©•­¹¤ÄÄÅÆýÇÈÉÉËøÌÍÍÎÎÏÐÑÑÓÔÕ÷Ö×ørrsttvvçaxzz†®VH»’À¹¦¬ÂÄÄÅÆ÷ÈÉÉÊËËÌÍÎÎÐÑÓÔèÕÖÖørrsttuvve'oyz¸¿]ßS”¸œŽ½Â·¸ÅÅÆÆÇÈÉÉÊËËÌÍÍÎÎÐÐÑÑÓÔÕ¬þÖØØþÙÛÛÜÞßáâäþåççèêëíýîïððçñòóóôõõö÷÷øùùúúûüüýýøÕÖ×ØØýÙÚÛÛþÜÞÞþßááâäÔåæççèèéêêëëìííîïïððñòòôôõõö÷÷øùùúúûüüýøÕÕÖ×ØØýÙÚÛÛþÝÞÞþßááâäþåææèßéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüüøÕÕýÖ×ØØÚÛýÜÝÞÞþàááâäÁåææçèèéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüøÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßÝÜÞááâääðåææçèèéêêëëìííîïïìðòòóôôõõö÷÷øøùúúûøÒÔÔÖý×ØÙÙþÚÜÜÉÝÙØËÌŸ¬½Øääååææçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúúøν·ËÔÕÖÖ­ØÙÙÏÉËÍÍÌŸ¤ª¹À¢Ä×ãäååææççèéêêëëìííîïïðñòòóôôõõö÷÷øøùúø¹›ž¾ÓÕÕÖÖ××Ϫ‘‘“¥½ÄÌÜßÚÁ¾ ÈããåæÛçèèéêêëëìííîïððñòòóóôõõö÷÷øøùø•ÆËŽ¶ÔÕÕËת’ÁÐÏÐÖÛÜÜÝßÚÔ¼œÏâããäååææççèéêêëëìííîïððñòòóóôõõö÷÷øø𧢌‡‘¢ÀÕ ‘ÈÔØØÚÚÆÛÖØÜÞׯ¡Ôáâããäååææçèèéêêëëìííïïððñòòóóôõõö÷÷øø+$$%)”–Š´×׆ØÕμ­ÂÚÝÝϦ§Öáââããäååææçèèéêêëëìíîîïððñòòóóôõõö÷÷ø%1$D-L¿ÇËѾž¢ÈÚÚØÚÅ£©×àááâããäååææçèèéêêëëìíîîïððñòòóóôõõö÷ø!CD3¦FMTyÇÙÚÙÖÙÖ²©¿Ùßààáâããäååææççèéêêëëííîîïððñòòóóôõõöø¾º€­ŠZ2 774K‰ÁØØÙÑ¥ÀÛÞÞààááâããäååÁæçèèééêëìííîîïððñòòóóôõõøÌß•“‚l}š•z#=HHXµÙÙ°—¢½ÁØÝßààááâããäååÙæçèèééêëìííîîïððñòòóóôõøÇ•¡°¥‘¦Çѳ‚c0HH€O晓—¢£™¬Üßààááâããäååææçèèééëëìííîîïððñòòóóôø› œ¢É£œ¢¶ÏÊÉŸ}›NB1'”–£’““•”˜Üßààááâããääåææçèèéêëëìííîîïððñòòóóø•£§½¢Ã·š»‹ŒŒyky¾•‘œÄÔÈ—•–Øààááâããääåææçèèéêëëìííîîïððñòòóø¡¤·®‰Œ¼²Š½ÊÈŒŽvhN”­˜²ÙÙÛÚ•–¦ØààáââããääåææçèééêëëìííîîïððñòòøÀ‡‡ˆº¤¡Æ‰­ÏÐÀ¹Œ{;<3‰¬–ªÕÛÛÜÝÜÝßßààáââããäååææçèééêëëìííîîïððñòø¯††´Œ–Ž› ¨±°œ‹©‘ˆP P™’¢ÑÚÛÛÜܹÕÝßààáââããääåææèèééêëëìííîîïððñøˆœ°ˆ•‘Œ‰‹‹Šœ¨—“]VŒœ¼ÈÚÖ“”–—ÙÞßààáââããääåæçèèééêëëìííîîïððøˆ‹­™¬““Šˆ‰‘‰‰Ž”ŽŒx3,%[•£³Ò¢“ØÚ™¶ÜÞßààáââããäååæçèèééêëëìííîîïðø… ¤¨“Œ‡ˆ¯Š½ÐɘŠR­•—œ‘“ÕÚÙŘÛÞÞßààáââÍãäåææçèèééêëëìííîîïø„Œ™—ž‡ŠˆˆºÍο̘•…+4 '¢“£‘‘’Ù““µ•––ÜÞßààáââããäåææçèèééêëëììíîîø…‹‡……†ˆÆ‡‡‘ž˜œŸŽ”³•o&'¥Õµš‘‘’ÓÙ“³Û••ÝÞßààáââæãäåææçèèééêëëììíîøš¿œ„ŒŠŒ‡‡‰œ“ŒŠ‹“¾˜quбגØÚ“ÄÛÜ•ÝÝßßààáâããääåææçèèééêëëììíø£Ä’„……‰‹‹‰‘Œˆ‰‰–‹‹x0oœ¼”•‘•Ò˜ÚÚÕ˜ÝÝÞßßààáââããþåææýçèééëìðø—”ƒƒ„†ˆ‰Š’Œˆˆ‰‰Šìx4SbÍ˯……ìƒ"- &©Î̼’‹ÅÇÌ¡µÔÕÕöÖ×Õ°ÀÙÚÜÜÝÝßàöáââããäåø}~~Ý€€|TFR_aÎÄÍŠ„{,'–œÀ–‹‹Ž™Å˜ÇÓÔÕÕþÖ××úƧÚÜÜÝÝßàáÇâããäø||}~~ƒ£·WSSyÏÓÈ°b-!z¦›§¶¥ª¨¯ÐÒÓÔÕÕÖÖ×ØØÙÚÚÜÜÝÝßàðáââããø||}~~Žª­ºSSßvÎ}M & #„½—È®º•“¶ÑÒÃËÔÕÕÖÖ×ØÙÚÚÜÝßàÊáââãø{||ŒŸ [ScrrsuUSX6.0(|±¤Å£ÈŠ“ÂÍÐÄ©¾ÓÔÕÕÖÖ×ØÙÚÚÜÝßàÊáââøz€ˆ•®¥cWÌþýþä†kB@ ${‹¿œÃŽ©ÏÐÐÑÑÒÒÔÔÕÕÖÖ×ØÙÚÚýÛÜÝÝßàôâøÅÀ¾ÂºsV¶þýýáþýýòžM%, Œ‘½–ŠªÅÎÏÐÐÑÑÒÒÓÕÕúÖ××ØÙÚÚÜÝßà÷øÍÍÎË£Sºýýþþýþþäü±6  n‹“³ˆ¢ÉÍÍÎÎÐÐÑÒÑÏÒÕÕþÖ××þÙÚÚÜÝßàðøŸ˜¢Éowøþý¬ª¨¨Øýýðà’ #p‰—˜¡ÊÌÍÍÎÐøÌÄÌÓÔÕÖ××ýØÙÚÚýÛÜÝÝßôàø\‹i“PÃüý€SSêi‹ÕþþûØ?'‹ˆ’ÈÊÊÌÍÍÎÐ÷ÑÒÒÓÓÔÕÖ××ýØÙÚÚýÛÜÝÝßõø“ˆ`7ÊýÜZSSêgÒþýüÛB(’•Œ·ÊÊÁ·ÌÍÍÎõÏÐÑÒÒÓÓÔÕÖ××ýØÙÚÚýÛÜÝÝôßø–‡e4ÏüÞUSSéiáþýýû¥c -£¢”µÊ·›¯ÊËÍÍÎýÏÐÒÒúÓÔÔÕÖ××ýØÙÚÚýÛÜÝÝöø¦™x[2ÓúâSSýgìþþíç£l<ž­–“Œ‰–»ÊÊËÍÍÞÎÏÏÐÒÑÒÓÔÔÕÖÖ××ØÙÙÚÚÛÜÝÝøwyxd-ÖùéSSÃaòþþû± d czsG7]x£ÊÊËÌÍÎÎÏÏÐÑÒÒÓÔÔÕÖÖ××ØÙÙÚÚÛÜÝøwxwg%Y÷ö¿ZZýYüýýÖñ¬^ =3GQWB=sÂÊËÌÍÎÏÏÍÊÐÑÓÓÔÔÕÕÖ××ØÙÚÚôÛÜøvwwzHLíþýýþþýýêìx]ZB6L[mƒ£Ÿ‚\cÀÊÊÌÌñÎ̺˜¸ÑÑÓÓÔÔÕÖÖ××þÙÚÚñÛøvvwrAjÆâüýþýýäå¿\*Kƒª‹°ÆÆDz~¿ÊÊËÌÌÍÍÏÏÐÐÑÑÓÓÔÔÕÕÖ××ØÙÙÚÚøuvvwd(y°ó÷þþÃĉ\+I–žÂÄÆÆ𢆋½ÉÊÊËÌÌÍÎÎÏÐÑÑÓÔôÕÖÖ××ØÙÚÚøtvvötZ!Ms{„~SSß) |“–³ÄÄ»²¡£ÇÇÈÉÊÊËÌÌÍÎÎÏÐÑÑÓÔîÕÖÖ××ØÙÙøtuvvwjZUé=Dh8  "|¤Ž›¢¢‹‹´ÇÇûÈÉÉËÌÌúÍÎÎÐÐÑÑÓÔÕðÖ××ØÙøttuvvwxjaøMl…|vGò[€ £‹ƒ„´ÄÅÆÇÇûÈÉÉËÌÌúÍÎÎÏÐÑÑÓÔÙÕÖÖ××ØøsttuvvwxtO{{|zXL K¥‹¬Žƒ¨ÄÄúÅÆÇÇÈÉÉþÊÌÌúÍÎÎÐÐÑÑÓÔÚÕÖÖ××ørsttuvvwf-z{{xS k©•­¹¤ÄÄÅÆýÇÈÉÉËøÌÍÍÎÎÏÐÑÑÓÔÕ÷Ö×ørrsttvvçaxzz†®VH»’À¹¦¬ÂÄÄÅÆ÷ÈÉÉÊËËÌÍÎÎÐÑÓÔèÕÖÖørrsttuvve'oyz¸¿]ßS”¸œŽ½Â·¸ÅÅÆÆÇÈÉÉÊËËÌÍÍÎÎÐÐÑÑÓÔÕ¬þÖØØþÙÛÛÜÞßáâäþåççèêëíýîïððçñòóóôõõö÷÷øùùúúûüüýýøÕÖ×ØØýÙÚÛÛþÜÞÞþßááâäÔåæççèèéêêëëìííîïïððñòòôôõõö÷÷øùùúúûüüýøÕÕÖ×ØØýÙÚÛÛþÝÞÞþßááâäþåææèßéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüüøÕÕýÖ×ØØÚÛýÜÝÞÞþàááâäÁåææçèèéêêëëìííîïïððñòóôôõõö÷÷øùùúúûüøÔÔÕÕÖ××ØÙÙÚÚÛÜÜÝÞÞßÝÜÞááâääðåææçèèéêêëëìííîïïìðòòóôôõõö÷÷øøùúúûøÒÔÔÖý×ØÙÙþÚÜÜÉÝÙØËÌŸ¬½Øääååææçèèéêêëëìííîïïðñòòóôôõõö÷÷øøùúúøν·ËÔÕÖÖ­ØÙÙÏÉËÍÍÌŸ¤ª¹À¢Ä×ãäååææççèéêêëëìííîïïðñòòóôôõõö÷÷øøùúø¹›ž¾ÓÕÕÖÖ××Ϫ‘‘“¥½ÄÌÜßÚÁ¾ ÈããåæÛçèèéêêëëìííîïððñòòóóôõõö÷÷øøùø•ÆËŽ¶ÔÕÕËת’ÁÐÏÐÖÛÜÜÝßÚÔ¼œÏâããäååææççèéêêëëìííîïððñòòóóôõõö÷÷øø𧢌‡‘¢ÀÕ ‘ÈÔØØÚÚÆÛÖØÜÞׯ¡Ôáâããäååææçèèéêêëëìííïïððñòòóóôõõö÷÷øø+$$%)”–Š´×׆ØÕμ­ÂÚÝÝϦ§Öáââããäååææçèèéêêëëìíîîïððñòòóóôõõö÷÷ø%1$D-L¿ÇËѾž¢ÈÚÚØÚÅ£©×àááâããäååææçèèéêêëëìíîîïððñòòóóôõõö÷ø!CD3¦FMTyÇÙÚÙÖÙÖ²©¿Ùßààáâããäååææççèéêêëëííîîïððñòòóóôõõöø¾º€­ŠZ2 774K‰ÁØØÙÑ¥ÀÛÞÞààááâããäååÁæçèèééêëìííîîïððñòòóóôõõøÌß•“‚l}š•z#=HHXµÙÙ°—¢½ÁØÝßààááâããäååÙæçèèééêëìííîîïððñòòóóôõøÇ•¡°¥‘¦Çѳ‚c0HH€O晓—¢£™¬Üßààááâããäååææçèèééëëìííîîïððñòòóóôø› œ¢É£œ¢¶ÏÊÉŸ}›NB1'”–£’““•”˜Üßààááâããääåææçèèéêëëìííîîïððñòòóóø•£§½¢Ã·š»‹ŒŒyky¾•‘œÄÔÈ—•–Øààááâããääåææçèèéêëëìííîîïððñòòóø¡¤·®‰Œ¼²Š½ÊÈŒŽvhN”­˜²ÙÙÛÚ•–¦ØààáââããääåææçèééêëëìííîîïððñòòøÀ‡‡ˆº¤¡Æ‰­ÏÐÀ¹Œ{;<3‰¬–ªÕÛÛÜÝÜÝßßààáââããäååææçèééêëëìííîîïððñòø¯††´Œ–Ž› ¨±°œ‹©‘ˆP P™’¢ÑÚÛÛÜܹÕÝßààáââããääåææèèééêëëìííîîïððñøˆœ°ˆ•‘Œ‰‹‹Šœ¨—“]VŒœ¼ÈÚÖ“”–—ÙÞßààáââããääåæçèèééêëëìííîîïððøˆ‹­™¬““Šˆ‰‘‰‰Ž”ŽŒx3,%[•£³Ò¢“ØÚ™¶ÜÞßààáââããäååæçèèééêëëìííîîïðø… ¤¨“Œ‡ˆ¯Š½ÐɘŠR­•—œ‘“ÕÚÙŘÛÞÞßààáââÍãäåææçèèééêëëìííîîïø„Œ™—ž‡ŠˆˆºÍο̘•…+4 '¢“£‘‘’Ù““µ•––ÜÞßààáââããäåææçèèééêëëììíîîø…‹‡……†ˆÆ‡‡‘ž˜œŸŽ”³•o&'¥Õµš‘‘’ÓÙ“³Û••ÝÞßààáââæãäåææçèèééêëëììíîøš¿œ„ŒŠŒ‡‡‰œ“ŒŠ‹“¾˜quбגØÚ“ÄÛÜ•ÝÝßßààáâããääåææçèèééêëëììíø£Ä’„……‰‹‹‰‘Œˆ‰‰–‹‹x0oœ¼”•‘•Ò˜ÚÚÕ˜ÝÝÞßßààáââããþåææýçèééëìðø—”ƒƒ„†ˆ‰Š’Œˆˆ‰‰Šìx4SbÍ˯……ìƒ"- &©Î̼’‹ÅÇÌ¡µÔÕÕöÖ×Õ°ÀÙÚÜÜÝÝßàöáââããäåø}~~Ý€€|TFR_aÎÄÍŠ„{,'–œÀ–‹‹Ž™Å˜ÇÓÔÕÕþÖ××úƧÚÜÜÝÝßàáÇâããäø||}~~ƒ£·WSSyÏÓÈ°b-!z¦›§¶¥ª¨¯ÐÒÓÔÕÕÖÖ×ØØÙÚÚÜÜÝÝßàðáââããø||}~~Žª­ºSSßvÎ}M & #„½—È®º•“¶ÑÒÃËÔÕÕÖÖ×ØÙÚÚÜÝßàÊáââãø{||ŒŸ [ScrrsuUSX6.0(|±¤Å£ÈŠ“ÂÍÐÄ©¾ÓÔÕÕÖÖ×ØÙÚÚÜÝßàÊáââøz€ˆ•®¥cWÌþýþä†kB@ ${‹¿œÃŽ©ÏÐÐÑÑÒÒÔÔÕÕÖÖ×ØÙÚÚýÛÜÝÝßàôâøÅÀ¾ÂºsV¶þýýáþýýòžM%, Œ‘½–ŠªÅÎÏÐÐÑÑÒÒÓÕÕúÖ××ØÙÚÚÜÝßà÷øÍÍÎË£Sºýýþþýþþäü±6  n‹“³ˆ¢ÉÍÍÎÎÐÐÑÒÑÏÒÕÕþÖ××þÙÚÚÜÝßàðøŸ˜¢Éowøþý¬ª¨¨Øýýðà’ #p‰—˜¡ÊÌÍÍÎÐøÌÄÌÓÔÕÖ××ýØÙÚÚýÛÜÝÝßôàø\‹i“PÃüý€SSêi‹ÕþþûØ?'‹ˆ’ÈÊÊÌÍÍÎÐ÷ÑÒÒÓÓÔÕÖ××ýØÙÚÚýÛÜÝÝßõø“ˆ`7ÊýÜZSSêgÒþýüÛB(’•Œ·ÊÊÁ·ÌÍÍÎõÏÐÑÒÒÓÓÔÕÖ××ýØÙÚÚýÛÜÝÝôßø–‡e4ÏüÞUSSéiáþýýû¥c -£¢”µÊ·›¯ÊËÍÍÎýÏÐÒÒúÓÔÔÕÖ××ýØÙÚÚýÛÜÝÝöø¦™x[2ÓúâSSýgìþþíç£l<ž­–“Œ‰–»ÊÊËÍÍÞÎÏÏÐÒÑÒÓÔÔÕÖÖ××ØÙÙÚÚÛÜÝÝøwyxd-ÖùéSSÃaòþþû± d czsG7]x£ÊÊËÌÍÎÎÏÏÐÑÒÒÓÔÔÕÖÖ××ØÙÙÚÚÛÜÝøwxwg%Y÷ö¿ZZýYüýýÖñ¬^ =3GQWB=sÂÊËÌÍÎÏÏÍÊÐÑÓÓÔÔÕÕÖ××ØÙÚÚôÛÜøvwwzHLíþýýþþýýêìx]ZB6L[mƒ£Ÿ‚\cÀÊÊÌÌñÎ̺˜¸ÑÑÓÓÔÔÕÖÖ××þÙÚÚñÛøvvwrAjÆâüýþýýäå¿\*Kƒª‹°ÆÆDz~¿ÊÊËÌÌÍÍÏÏÐÐÑÑÓÓÔÔÕÕÖ××ØÙÙÚÚøuvvwd(y°ó÷þþÃĉ\+I–žÂÄÆÆ𢆋½ÉÊÊËÌÌÍÎÎÏÐÑÑÓÔôÕÖÖ××ØÙÚÚøtvvötZ!Ms{„~SSß) |“–³ÄÄ»²¡£ÇÇÈÉÊÊËÌÌÍÎÎÏÐÑÑÓÔîÕÖÖ××ØÙÙøtuvvwjZUé=Dh8  "|¤Ž›¢¢‹‹´ÇÇûÈÉÉËÌÌúÍÎÎÐÐÑÑÓÔÕðÖ××ØÙøttuvvwxjaøMl…|vGò[€ £‹ƒ„´ÄÅÆÇÇûÈÉÉËÌÌúÍÎÎÏÐÑÑÓÔÙÕÖÖ××ØøsttuvvwxtO{{|zXL K¥‹¬Žƒ¨ÄÄúÅÆÇÇÈÉÉþÊÌÌúÍÎÎÐÐÑÑÓÔÚÕÖÖ××ørsttuvvwf-z{{xS k©•­¹¤ÄÄÅÆýÇÈÉÉËøÌÍÍÎÎÏÐÑÑÓÔÕ÷Ö×ørrsttvvçaxzz†®VH»’À¹¦¬ÂÄÄÅÆ÷ÈÉÉÊËËÌÍÎÎÐÑÓÔèÕÖÖørrsttuvve'oyz¸¿]ßS”¸œŽ½Â·¸ÅÅÆÆÇÈÉÉÊËËÌÍÍÎÎÐÐÑÑÓÔÕ¬þýýþýýüþýýþþôýþýþþýþýýþýþþýþýþþýþþüøþþýýþüýýþýþýþþýþþýþùýüýýþþýýþùøýþþýþýýþþýýþýúþýþþýþþýöþýýþýþýþþýýþþøýýþýþþýýþýþýþþýýþ ýþýþìøýþþýþþýýþþýýþýþýþþýýþýþ÷ýþýýþýýþýýþþýþþþøýýþýþýþþýýþýþýþþøýýþþýýþþýýþþýýþýþýþþýýþþøýýþþýýþýúþýþýýþþøýþþýþýþýýüþýþýýþýþþýýþøøýþýýþþýýþþýýþýþþýýüþýýþþý÷þýþýþýþþýýþúøþþýýþþýþýûþýþþýýþþýýþýýþýþþüøþþýý÷þýþýþýýþýýþýþþýýþýþþýýýþýþþþøýýþýþþýýþþýýúþýþýþýýþýþûøýýþýýúþýýþþýýýþýþþýþýþþýþþýþýøþý ýþýþþýýþüýþþýýþþýýüþýþýýþøøþýþýýþýýùþýýþýýþþýþþýýúþýýþþýýþþýýþûøþýþýýþ÷ýþýþþýþþýýþýýþýýõþýþþýýþýýþýýþþøýýþýþýþþýýþþýýþýþûýþýýþþüøþþýýýþýþþýþþýýþýþýþþýýþýþþýþþþøýýþþýýùþýþýýþýýôþýþþýþþýþýýþþýþþýýþþýýþ÷øýýþþýþþýýþýîþýþýþþýþýþþýþýýþþýýþüýþýþþûøþýþýýþþýýþýýþýþþúýþþýþýýþþý ýþþøýýþýùþýþýþþýýþþýýþþýþþýþüýýþþøýýþþýýþþý ýüþýþýýþýýþýýüþýýþþþøþþýüþýýþþ÷ýþþýþýýþýýþþýýþýþþýýüþýýþþýøþýýþýýþýýþþýýýþýþþýüþýýþþý÷þýýþýýþýþþýøþýýüþýþýýùþýýþýþýýþýþôýþýþþýýþþýýþþþøýýþþýýþýþýþýþýþýþüøþþýýþþýýþþýýþþýýþýüþýþýýþýþþýýþýþýýþýþþþøýýùþýýþýýþþúýþþýýþþýýþýþþ ýýþýþþüýþýþþýþøýýþþýýõþýþýþýþýýþýý þüýþþýýþþýþþîýþþýþøþþýýþýþþýýþýýþýþýýþýýúþýþþýþþþýþþòýþýþþýþýþýøþþýýþþýýþýþýþýþýþüýþýþþýþýþþ­ýýþýþþýþþýþþýýýþýþþýûþýþýþþôýþýýþýþþøýþýýþýþýþýüþýþýýüþýýþþýþþýþþþýþþþýþþýýþýþþüøþþýýþþýýúþýþýýþþýýþýýüþýýþþýþþýþþüýþþýýþôýþýþþøþýýþþýýþþýýþýþúýþýþýþþý þôýþýþþøþýþýþýýþýöþýýþýþþýýþþýþòýþþýþþýýþþýþýþþùýþýþþýþþüýþøýýþýþþýý÷þýþþýýþþýýþûýþýýþþûýþþýþþýþýýøýýþ ýþþý ýþýþþýþ þöýþýþøýþýþýýþýþþýþþ ýõþýýþýýþýþýþþýþþýþþüýþøýýþýþýýþýýþýûþýýþýýþþýýþýþþýþþþýþþýýøýýþþý ýþúýþýýþýýùþýýþýþýýýþýþþýþþýþþþýþþýýþøþþýýþýýþýùþýýþýþýýþþýýþýþþýþþþøþþýüþýýþþýûþýýþýýûþýýþýýöþýþýþýýþýþþþýþ þüýþýþþþøýýüþýýþþ÷ýþþýþþýþýýûþýýþýýúþýþýþýýþþýþþþýþþöýþþýþþýþøýýýþýþþýûþýýþýýþþýýýþýþþýüþýþýýþýþþýþþýýøýýþýþþýþþýþýýþýýþýýþýýþýþûýþýýþþþýþþýþûøýþþýýþýûþýýþýýþþýþþýýþýþþýþýþþýþþ÷ýþþýþýøýþþýþþýýþýþþýýþþýýþüýþýþþþýþþñýþýþþýþþýþýþþøýýþþýýþýýþýýþþýýûþýýþýýþþýýþþýþþúýþþýýþþþøýýþþýýþýûþýýþýýþþýþþýþýþýþþýþþþýþþý÷þýþþøýýþýýþýþýýþýýûþýþþýýþýþýþýþþýþþýþûýþýøþþüýþþýýþýþýþýþüýþþýýþýþéýþýþþýþýþþýþýþþýþþýþýøýýþþýýþõýþþýýþþýýþýýþýþüýþþýýíþýþþýþýþþýþþýþýøýþýýþýþþýýþþýýþýþþýþþýçþýþþýþýþþýþþýþýøþýýþýýþþýýþþýýþýþþýýûþýýþýýæþýýþþýþýýþýþþýþýþþýþþýþýøýýòþýýþýþþýþþýýþýýþþýýúþýýþþýýûþýþþýýéþýýþýþþýþýþþýþþýþýøýýþýýþýúþýýþþýýþýþþýýûþýýþýýëþýþþýþýþþýþþýþýøþþýýþþýþúýþþýþýýüþýýþþýþýýþýýîþýþþýþýþþýþþýþýøþýýúþýþýþýýúþýýþþýýþ÷ýþþýýþýþýýïþýþþýþýþþýþþýþýøþþýþýþþýýþýùþýþþýýþþýþýãþýýþýþþýþýþþýþþýþýøýþþýýþýþýþþýþýûþýþþýýùþýüýþþýýþýíþýþþýþýþþýþþýþýøþþýýüþýþýýþþýýþýþþýýüþýþýýþþýýîþýþþýþýþþýþþýþýøþýýþýøþýýþþýþýýõþýþþýþýýþþýýþþýýðþýþþýþýþþýþþýþý¬‡Èˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––——ig–™lhi™lqm> kku«X- Snnop‡ˆ‰‰Š‹‹ŒŒŽŽ’‘‘ý’“””–Âigghh˜›i|•…@-kjo}¢TSL ]lmnnopp††‡‡ˆ‰‰Š‹‹ŒŒŽŽƒ‘‘““””•––—ñkywi›œ‘R $?jjöoSSC flmnnêop…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”ê•––——˜—¦jwk››–a .*LjjÞYSSC"kllmnnoo„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”–—똕hhš››•a#`jkj^%SSáj³Œllmnno„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”–᧘••jjš›˜S 0_jqjXPSTŠ¸tlmnn„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘“”Ë–‡¦˜•fhjpk=&7o‚niSASX ½¾¿´¤—‡q‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘“”˦h–••”‡iL*0gp‰hH%2En½½¾¿¿º¤~‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽý‘‘“ú”•“g”——é“gsF 'jpjp8&>-ª¼½¾¿¿êÀ‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽý‘‘“È”“ff•——s‰?  9l{p‚'0dº¼½½¹«»¿À‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹Œ‹ŽŽý‘‘“Êfe†–’kd%(Rtgpuj»¼½¸Ÿ™¿¿€‚‚ƒ„„…††‡‡ˆ‰‰]Š‹‹ŒŽŽý‘‘“Êuffehl1 0Wngkdi»¼»´’²€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹‹ŒŽŽý‘‘þ’““ÒoˆH0/\rh{…*Aº»¸”¬¥or€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ýŒŽŽý‘‘“”Þ‘o‰F2 [z„k H€¶¦~°»«yv~~€‚‚„…‡ˆ÷‰ˆŠŠ‹‹ŒŽŽý‘‘“甑hwC04 XxŒVVr•}¥¸½½÷¾}~~€€‚‚„…‡ˆø‰ŠŠ‹‹ŒŽŽá‘‘’““”ŒnI/ efiqY^g}§»¼½½ö¾}}~~€‚‚„…‡ˆ‰ŠÚ‹ŒŒŽŽ‘’“’Œk0*ZxvDcglƒ£»¼½½ö|}}~~€€‚‚„…‡öˆ‰‰ŠŠ‹ŒŒŽŽÕƒ‡‘’““‡. \ŒdM 4 efghy®»¼½»||}}~~€€‚‚„…Ƈ†‡ˆ‰‰ŠŠ‹ŒŒŽŽ‘““Œ< _‘“d[* &ffggo‘˜š“{{|}}~~€€‚‚„…†‡‰øŠ‹ŒŒŽí“’•H,Wl„aM4&Offþghhñijz{{|}}~~€€‚‚„…ú„††‡‡‰‰ŠŒéŽ‡‰r†‘N $Xid[-'Jffghûijzz{{}~û€€‚‚„ø…„…††‡‡‰‰Šæ‹ŒŒˆwƒ{†\*\}p^Heffghiþyzz{}~ø€€‚‚„„ú…††‡ˆ‰‰ŠŒç†yik- [mveUeeffjghhúixxzz{{}~û€€‚‚ö„ƒ„„…‚ƒ‰‡‰‰ŠŒâŽ“ŠtJixnR;‡efghgwkhhxxz{}~ù€€‚‚ƒƒ„õ…††‡‡ˆ‰‰Š‹ŒŒæ‹†yn/$e‹ˆX9xefgfkkhhþwxxz{}~û€€‚‚ƒ„Õ…††‡‡ˆ‰‰Š‹ŒŒ‹zo%..?in‘‚7#jdqfoffgghhvwxxz{}~ï€V‚‚ƒƒ„„…††‡‡‰‰ÝŠ‹ŒŒq 0€ƒtiL‹zwrfifghghvuwxxz{}~ø€€€‚ƒƒù„…††‡‡‰‰þ‹ŒŒâv1/.-lmvPI}hddk…qhxomuuvwxxz{}~þ€€ý‚ƒƒþ„††‡‰þ‹ŒŒñs3//5ˆˆijglddøgzxffgpuuývwxxz{}~ø€€€‚ƒƒþ„††Þw‡‰‰ŠŠŒŒt4//7‹W ,rysddeŒkˆurtuuøvwwxxzz{{}~€ý‚ƒƒÙ„††}w‡ˆ‰‰Š‹Œw6./D‹i" hdv„v›¤o¦›”stuuþwxxz{}~€ý‚ƒƒý„…††ˆ‰âŠ‹y:..H…M1-2‚~”o˜}§†sstuuývwxxz{}÷~}~€€ƒƒÙ„……††ˆˆ‰‰‹}?..HŒ‡C/-Uuotpfn§œz …mrrstuuývwxxz{þ|}}ù~€€ƒƒý„…††þˆ‰‰âD-.FŽˆ?/0f’’ŒŒ‰¡¨Ÿs˜gqrrstuuývwxxýyz{{ô}||}}€€‚ƒƒù„…††‡ˆ‰‰õ@-ˆŽx5.?‘‘ð†…§©¥”esxqqrrstuuývwxxûyz{{||}€þ‚ƒƒç„…††‡‡‰‰ƒ?;ˆŒq..D‰‘‘ˆ†§©©ô¢¥‰pqqrrstuuývwxxýyz{{|}€ý‚ƒƒç„…††‡‡‰~p€‹‹Œv../Œ‘}ž¨¨©©ð¦–ppqqrrsttuuvwxxöyz{z{||}}ü€‚ƒƒþ„††ì‡ˆ‰‰ŠŠ‹‹„,$9*‹—Ÿ§§¨©©ï¨¥oopqqrrsttuuvwxxöyzyz{||}}瀂ƒƒ„……††‡‡ˆ‰Š‹ˆe*+} £§§þ¨©©ï¨noopqqrrsttuuvwxxyùz{||}}ü€‚ƒƒí„…†‡‡ˆ‘‹wvLCQ€¢¦¦§§þ¨©©noópqqrrsttuuvwxxyøz{||}}~ꀂƒƒ„…††u… ¢£ŒJEGS¡¦¦§þ¨©©û¦mnnooqrtuwxyþz||ý}~ü€‚ƒƒî„€{Žš¡¢¢UC5=˜š£¦§§¨ø•©©llnnooqrõsttuuvwxwwyyþz||ý}~ꂃƒ‚vw— ¡¡¢¡hIt¥¦¦£§§û‹”©llnoqrõsttuuvwvwxyyþz||~þ‚‚å~q‰›Ÿ¡¡¢š_0:Oƒ¥¥ }¡§£‰›kllnoqrõsttuuvvwwxyyþz||Ü…~yZW„’™ŸŸ ¡‘_#8EN„¡—w•¥¥™Š{™¡jkllýmnooqrústtuuvvýwxyy×z{|‚lhkbWVW˜œœžŸŸœ`F-EHH’•c¦¤wou•jjkllnoqrsütuuvvýwxyy×zynaSTTUX]ZtŒšžŸŸœvICDEQM:e‘¦ }˜Š–iijkllnoqrþsttvwyýpYSSïTWUXj‡‹v†“}mh[UJEEõUa‹¥¦¦|{‹iiþkllýmnooqrúststtvvwÙy{|eRSSTVUfkn‚j~{[d{yts6 DSs~‚v‰xehiiýjkllnoqrstv×wxyulTTSTU^_]feqnYYvƒ…xcj<$&.2=Fc€rUYcghiiýjkllnoqrstvÛwx|zW`[SUUV^WUWWYw„sgbwiO 0+!94&&'ggþhiiýjkllnoûpqrrsstv×wvnfvhbcSVTUUVXdf]agsl\\V),,)ffghiiklnoqúrsstuvvýwxyyæxnfSUTUXZZYXbe^[hvqoB.-+,,ù)effghiiýjkllnoûqpqqssþuvvýwxyyèzqhc_^^\\hwsap‚……~}„ˆˆx66ü!eeffþhiiýjkllnopqsþuvvîwxyyz{xrn]_ey€}{‚„„þ…††ï‡ˆˆ‰ŠŠ‹ƒIdeeffghiiýjkllûmnooppþqssýtuvvþwyyìz{{rnt|~€‚‚ƒ„„…††‡‡ýˆ‰ŠŠúŒddeeffþhiiýjkllûmnonppþqssþtvvþwyyñz{{||}~~€‚‚ƒ„„ý…†‡‡þˆŠŠcødeeffghiiýjkllþmnnpqsþtvvöwxyyz{{|}~~ø€‚‚ƒƒ„„þ†‡‡ˆ÷‰Šbccdeeffhiöjkkllmmnnppþqssýtuvvúwxyyz{{þ}~~퀂‚ƒƒ„„…††‡‡ˆˆ‰bbcceføghhiijkllmnpqsýtuvvöwxyyzz{{|~~󂂃ƒ„„……†‡ˆˆüabbccôdeffghhiijkllmnpqsõtuvvwwxyyz{{þ}~~ü€‚‚ýƒ„……ø‡ˆˆ``bbccefñghhiijklkkmmnnppqstvwûxyyz{{}~ü€‚‚„…ý‡ˆ``bcefùghhiijkkmïnoppqqrssttuvvwwyyúz{{|}~~´€‚‚ƒ„„……†‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡Èˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––——ig–™lhi™lqm> kku«X- Snnop‡ˆ‰‰Š‹‹ŒŒŽŽ’‘‘ý’“””–Âigghh˜›i|•…@-kjo}¢TSL ]lmnnopp††‡‡ˆ‰‰Š‹‹ŒŒŽŽƒ‘‘““””•––—ñkywi›œ‘R $?jjöoSSC flmnnêop…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”ê•––——˜—¦jwk››–a .*LjjÞYSSC"kllmnnoo„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”–—똕hhš››•a#`jkj^%SSáj³Œllmnno„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”–᧘••jjš›˜S 0_jqjXPSTŠ¸tlmnn„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘“”Ë–‡¦˜•fhjpk=&7o‚niSASX ½¾¿´¤—‡q‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘“”˦h–••”‡iL*0gp‰hH%2En½½¾¿¿º¤~‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽý‘‘“ú”•“g”——é“gsF 'jpjp8&>-ª¼½¾¿¿êÀ‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽý‘‘“È”“ff•——s‰?  9l{p‚'0dº¼½½¹«»¿À‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹Œ‹ŽŽý‘‘“Êfe†–’kd%(Rtgpuj»¼½¸Ÿ™¿¿€‚‚ƒ„„…††‡‡ˆ‰‰]Š‹‹ŒŽŽý‘‘“Êuffehl1 0Wngkdi»¼»´’²€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹‹ŒŽŽý‘‘þ’““ÒoˆH0/\rh{…*Aº»¸”¬¥or€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ýŒŽŽý‘‘“”Þ‘o‰F2 [z„k H€¶¦~°»«yv~~€‚‚„…‡ˆ÷‰ˆŠŠ‹‹ŒŽŽý‘‘“甑hwC04 XxŒVVr•}¥¸½½÷¾}~~€€‚‚„…‡ˆø‰ŠŠ‹‹ŒŽŽá‘‘’““”ŒnI/ efiqY^g}§»¼½½ö¾}}~~€‚‚„…‡ˆ‰ŠÚ‹ŒŒŽŽ‘’“’Œk0*ZxvDcglƒ£»¼½½ö|}}~~€€‚‚„…‡öˆ‰‰ŠŠ‹ŒŒŽŽÕƒ‡‘’““‡. \ŒdM 4 efghy®»¼½»||}}~~€€‚‚„…Ƈ†‡ˆ‰‰ŠŠ‹ŒŒŽŽ‘““Œ< _‘“d[* &ffggo‘˜š“{{|}}~~€€‚‚„…†‡‰øŠ‹ŒŒŽí“’•H,Wl„aM4&Offþghhñijz{{|}}~~€€‚‚„…ú„††‡‡‰‰ŠŒéŽ‡‰r†‘N $Xid[-'Jffghûijzz{{}~û€€‚‚„ø…„…††‡‡‰‰Šæ‹ŒŒˆwƒ{†\*\}p^Heffghiþyzz{}~ø€€‚‚„„ú…††‡ˆ‰‰ŠŒç†yik- [mveUeeffjghhúixxzz{{}~û€€‚‚ö„ƒ„„…‚ƒ‰‡‰‰ŠŒâŽ“ŠtJixnR;‡efghgwkhhxxz{}~ù€€‚‚ƒƒ„õ…††‡‡ˆ‰‰Š‹ŒŒæ‹†yn/$e‹ˆX9xefgfkkhhþwxxz{}~û€€‚‚ƒ„Õ…††‡‡ˆ‰‰Š‹ŒŒ‹zo%..?in‘‚7#jdqfoffgghhvwxxz{}~ï€V‚‚ƒƒ„„…††‡‡‰‰ÝŠ‹ŒŒq 0€ƒtiL‹zwrfifghghvuwxxz{}~ø€€€‚ƒƒù„…††‡‡‰‰þ‹ŒŒâv1/.-lmvPI}hddk…qhxomuuvwxxz{}~þ€€ý‚ƒƒþ„††‡‰þ‹ŒŒñs3//5ˆˆijglddøgzxffgpuuývwxxz{}~ø€€€‚ƒƒþ„††Þw‡‰‰ŠŠŒŒt4//7‹W ,rysddeŒkˆurtuuøvwwxxzz{{}~€ý‚ƒƒÙ„††}w‡ˆ‰‰Š‹Œw6./D‹i" hdv„v›¤o¦›”stuuþwxxz{}~€ý‚ƒƒý„…††ˆ‰âŠ‹y:..H…M1-2‚~”o˜}§†sstuuývwxxz{}÷~}~€€ƒƒÙ„……††ˆˆ‰‰‹}?..HŒ‡C/-Uuotpfn§œz …mrrstuuývwxxz{þ|}}ù~€€ƒƒý„…††þˆ‰‰âD-.FŽˆ?/0f’’ŒŒ‰¡¨Ÿs˜gqrrstuuývwxxýyz{{ô}||}}€€‚ƒƒù„…††‡ˆ‰‰õ@-ˆŽx5.?‘‘ð†…§©¥”esxqqrrstuuývwxxûyz{{||}€þ‚ƒƒç„…††‡‡‰‰ƒ?;ˆŒq..D‰‘‘ˆ†§©©ô¢¥‰pqqrrstuuývwxxýyz{{|}€ý‚ƒƒç„…††‡‡‰~p€‹‹Œv../Œ‘}ž¨¨©©ð¦–ppqqrrsttuuvwxxöyz{z{||}}ü€‚ƒƒþ„††ì‡ˆ‰‰ŠŠ‹‹„,$9*‹—Ÿ§§¨©©ï¨¥oopqqrrsttuuvwxxöyzyz{||}}瀂ƒƒ„……††‡‡ˆ‰Š‹ˆe*+} £§§þ¨©©ï¨noopqqrrsttuuvwxxyùz{||}}ü€‚ƒƒí„…†‡‡ˆ‘‹wvLCQ€¢¦¦§§þ¨©©noópqqrrsttuuvwxxyøz{||}}~ꀂƒƒ„…††u… ¢£ŒJEGS¡¦¦§þ¨©©û¦mnnooqrtuwxyþz||ý}~ü€‚ƒƒî„€{Žš¡¢¢UC5=˜š£¦§§¨ø•©©llnnooqrõsttuuvwxwwyyþz||ý}~ꂃƒ‚vw— ¡¡¢¡hIt¥¦¦£§§û‹”©llnoqrõsttuuvwvwxyyþz||~þ‚‚å~q‰›Ÿ¡¡¢š_0:Oƒ¥¥ }¡§£‰›kllnoqrõsttuuvvwwxyyþz||Ü…~yZW„’™ŸŸ ¡‘_#8EN„¡—w•¥¥™Š{™¡jkllýmnooqrústtuuvvýwxyy×z{|‚lhkbWVW˜œœžŸŸœ`F-EHH’•c¦¤wou•jjkllnoqrsütuuvvýwxyy×zynaSTTUX]ZtŒšžŸŸœvICDEQM:e‘¦ }˜Š–iijkllnoqrþsttvwyýpYSSïTWUXj‡‹v†“}mh[UJEEõUa‹¥¦¦|{‹iiþkllýmnooqrúststtvvwÙy{|eRSSTVUfkn‚j~{[d{yts6 DSs~‚v‰xehiiýjkllnoqrstv×wxyulTTSTU^_]feqnYYvƒ…xcj<$&.2=Fc€rUYcghiiýjkllnoqrstvÛwx|zW`[SUUV^WUWWYw„sgbwiO 0+!94&&'ggþhiiýjkllnoûpqrrsstv×wvnfvhbcSVTUUVXdf]agsl\\V),,)ffghiiklnoqúrsstuvvýwxyyæxnfSUTUXZZYXbe^[hvqoB.-+,,ù)effghiiýjkllnoûqpqqssþuvvýwxyyèzqhc_^^\\hwsap‚……~}„ˆˆx66ü!eeffþhiiýjkllnopqsþuvvîwxyyz{xrn]_ey€}{‚„„þ…††ï‡ˆˆ‰ŠŠ‹ƒIdeeffghiiýjkllûmnooppþqssýtuvvþwyyìz{{rnt|~€‚‚ƒ„„…††‡‡ýˆ‰ŠŠúŒddeeffþhiiýjkllûmnonppþqssþtvvþwyyñz{{||}~~€‚‚ƒ„„ý…†‡‡þˆŠŠcødeeffghiiýjkllþmnnpqsþtvvöwxyyz{{|}~~ø€‚‚ƒƒ„„þ†‡‡ˆ÷‰Šbccdeeffhiöjkkllmmnnppþqssýtuvvúwxyyz{{þ}~~퀂‚ƒƒ„„…††‡‡ˆˆ‰bbcceføghhiijkllmnpqsýtuvvöwxyyzz{{|~~󂂃ƒ„„……†‡ˆˆüabbccôdeffghhiijkllmnpqsõtuvvwwxyyz{{þ}~~ü€‚‚ýƒ„……ø‡ˆˆ``bbccefñghhiijklkkmmnnppqstvwûxyyz{{}~ü€‚‚„…ý‡ˆ``bcefùghhiijkkmïnoppqqrssttuvvwwyyúz{{|}~~´€‚‚ƒ„„……†‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡Èˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––——ig–™lhi™lqm> kku«X- Snnop‡ˆ‰‰Š‹‹ŒŒŽŽ’‘‘ý’“””–Âigghh˜›i|•…@-kjo}¢TSL ]lmnnopp††‡‡ˆ‰‰Š‹‹ŒŒŽŽƒ‘‘““””•––—ñkywi›œ‘R $?jjöoSSC flmnnêop…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”ê•––——˜—¦jwk››–a .*LjjÞYSSC"kllmnnoo„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”–—똕hhš››•a#`jkj^%SSáj³Œllmnno„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘“”–᧘••jjš›˜S 0_jqjXPSTŠ¸tlmnn„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘“”Ë–‡¦˜•fhjpk=&7o‚niSASX ½¾¿´¤—‡q‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘“”˦h–••”‡iL*0gp‰hH%2En½½¾¿¿º¤~‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽý‘‘“ú”•“g”——é“gsF 'jpjp8&>-ª¼½¾¿¿êÀ‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽý‘‘“È”“ff•——s‰?  9l{p‚'0dº¼½½¹«»¿À‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹Œ‹ŽŽý‘‘“Êfe†–’kd%(Rtgpuj»¼½¸Ÿ™¿¿€‚‚ƒ„„…††‡‡ˆ‰‰]Š‹‹ŒŽŽý‘‘“Êuffehl1 0Wngkdi»¼»´’²€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹‹ŒŽŽý‘‘þ’““ÒoˆH0/\rh{…*Aº»¸”¬¥or€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ýŒŽŽý‘‘“”Þ‘o‰F2 [z„k H€¶¦~°»«yv~~€‚‚„…‡ˆ÷‰ˆŠŠ‹‹ŒŽŽý‘‘“甑hwC04 XxŒVVr•}¥¸½½÷¾}~~€€‚‚„…‡ˆø‰ŠŠ‹‹ŒŽŽá‘‘’““”ŒnI/ efiqY^g}§»¼½½ö¾}}~~€‚‚„…‡ˆ‰ŠÚ‹ŒŒŽŽ‘’“’Œk0*ZxvDcglƒ£»¼½½ö|}}~~€€‚‚„…‡öˆ‰‰ŠŠ‹ŒŒŽŽÕƒ‡‘’““‡. \ŒdM 4 efghy®»¼½»||}}~~€€‚‚„…Ƈ†‡ˆ‰‰ŠŠ‹ŒŒŽŽ‘““Œ< _‘“d[* &ffggo‘˜š“{{|}}~~€€‚‚„…†‡‰øŠ‹ŒŒŽí“’•H,Wl„aM4&Offþghhñijz{{|}}~~€€‚‚„…ú„††‡‡‰‰ŠŒéŽ‡‰r†‘N $Xid[-'Jffghûijzz{{}~û€€‚‚„ø…„…††‡‡‰‰Šæ‹ŒŒˆwƒ{†\*\}p^Heffghiþyzz{}~ø€€‚‚„„ú…††‡ˆ‰‰ŠŒç†yik- [mveUeeffjghhúixxzz{{}~û€€‚‚ö„ƒ„„…‚ƒ‰‡‰‰ŠŒâŽ“ŠtJixnR;‡efghgwkhhxxz{}~ù€€‚‚ƒƒ„õ…††‡‡ˆ‰‰Š‹ŒŒæ‹†yn/$e‹ˆX9xefgfkkhhþwxxz{}~û€€‚‚ƒ„Õ…††‡‡ˆ‰‰Š‹ŒŒ‹zo%..?in‘‚7#jdqfoffgghhvwxxz{}~ï€V‚‚ƒƒ„„…††‡‡‰‰ÝŠ‹ŒŒq 0€ƒtiL‹zwrfifghghvuwxxz{}~ø€€€‚ƒƒù„…††‡‡‰‰þ‹ŒŒâv1/.-lmvPI}hddk…qhxomuuvwxxz{}~þ€€ý‚ƒƒþ„††‡‰þ‹ŒŒñs3//5ˆˆijglddøgzxffgpuuývwxxz{}~ø€€€‚ƒƒþ„††Þw‡‰‰ŠŠŒŒt4//7‹W ,rysddeŒkˆurtuuøvwwxxzz{{}~€ý‚ƒƒÙ„††}w‡ˆ‰‰Š‹Œw6./D‹i" hdv„v›¤o¦›”stuuþwxxz{}~€ý‚ƒƒý„…††ˆ‰âŠ‹y:..H…M1-2‚~”o˜}§†sstuuývwxxz{}÷~}~€€ƒƒÙ„……††ˆˆ‰‰‹}?..HŒ‡C/-Uuotpfn§œz …mrrstuuývwxxz{þ|}}ù~€€ƒƒý„…††þˆ‰‰âD-.FŽˆ?/0f’’ŒŒ‰¡¨Ÿs˜gqrrstuuývwxxýyz{{ô}||}}€€‚ƒƒù„…††‡ˆ‰‰õ@-ˆŽx5.?‘‘ð†…§©¥”esxqqrrstuuývwxxûyz{{||}€þ‚ƒƒç„…††‡‡‰‰ƒ?;ˆŒq..D‰‘‘ˆ†§©©ô¢¥‰pqqrrstuuývwxxýyz{{|}€ý‚ƒƒç„…††‡‡‰~p€‹‹Œv../Œ‘}ž¨¨©©ð¦–ppqqrrsttuuvwxxöyz{z{||}}ü€‚ƒƒþ„††ì‡ˆ‰‰ŠŠ‹‹„,$9*‹—Ÿ§§¨©©ï¨¥oopqqrrsttuuvwxxöyzyz{||}}瀂ƒƒ„……††‡‡ˆ‰Š‹ˆe*+} £§§þ¨©©ï¨noopqqrrsttuuvwxxyùz{||}}ü€‚ƒƒí„…†‡‡ˆ‘‹wvLCQ€¢¦¦§§þ¨©©noópqqrrsttuuvwxxyøz{||}}~ꀂƒƒ„…††u… ¢£ŒJEGS¡¦¦§þ¨©©û¦mnnooqrtuwxyþz||ý}~ü€‚ƒƒî„€{Žš¡¢¢UC5=˜š£¦§§¨ø•©©llnnooqrõsttuuvwxwwyyþz||ý}~ꂃƒ‚vw— ¡¡¢¡hIt¥¦¦£§§û‹”©llnoqrõsttuuvwvwxyyþz||~þ‚‚å~q‰›Ÿ¡¡¢š_0:Oƒ¥¥ }¡§£‰›kllnoqrõsttuuvvwwxyyþz||Ü…~yZW„’™ŸŸ ¡‘_#8EN„¡—w•¥¥™Š{™¡jkllýmnooqrústtuuvvýwxyy×z{|‚lhkbWVW˜œœžŸŸœ`F-EHH’•c¦¤wou•jjkllnoqrsütuuvvýwxyy×zynaSTTUX]ZtŒšžŸŸœvICDEQM:e‘¦ }˜Š–iijkllnoqrþsttvwyýpYSSïTWUXj‡‹v†“}mh[UJEEõUa‹¥¦¦|{‹iiþkllýmnooqrúststtvvwÙy{|eRSSTVUfkn‚j~{[d{yts6 DSs~‚v‰xehiiýjkllnoqrstv×wxyulTTSTU^_]feqnYYvƒ…xcj<$&.2=Fc€rUYcghiiýjkllnoqrstvÛwx|zW`[SUUV^WUWWYw„sgbwiO 0+!94&&'ggþhiiýjkllnoûpqrrsstv×wvnfvhbcSVTUUVXdf]agsl\\V),,)ffghiiklnoqúrsstuvvýwxyyæxnfSUTUXZZYXbe^[hvqoB.-+,,ù)effghiiýjkllnoûqpqqssþuvvýwxyyèzqhc_^^\\hwsap‚……~}„ˆˆx66ü!eeffþhiiýjkllnopqsþuvvîwxyyz{xrn]_ey€}{‚„„þ…††ï‡ˆˆ‰ŠŠ‹ƒIdeeffghiiýjkllûmnooppþqssýtuvvþwyyìz{{rnt|~€‚‚ƒ„„…††‡‡ýˆ‰ŠŠúŒddeeffþhiiýjkllûmnonppþqssþtvvþwyyñz{{||}~~€‚‚ƒ„„ý…†‡‡þˆŠŠcødeeffghiiýjkllþmnnpqsþtvvöwxyyz{{|}~~ø€‚‚ƒƒ„„þ†‡‡ˆ÷‰Šbccdeeffhiöjkkllmmnnppþqssýtuvvúwxyyz{{þ}~~퀂‚ƒƒ„„…††‡‡ˆˆ‰bbcceføghhiijkllmnpqsýtuvvöwxyyzz{{|~~󂂃ƒ„„……†‡ˆˆüabbccôdeffghhiijkllmnpqsõtuvvwwxyyz{{þ}~~ü€‚‚ýƒ„……ø‡ˆˆ``bbccefñghhiijklkkmmnnppqstvwûxyyz{{}~ü€‚‚„…ý‡ˆ``bcefùghhiijkkmïnoppqqrssttuvvwwyyúz{{|}~~´€‚‚ƒ„„……†‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††þýþþýýþôýþýýþþýýþýýþþúýþþýýþþýþþýýþýþþýý÷þýýþýþþýþþýþþýþþþýþþüýþþýýýþýþþüýþþýýúþýþþýþþþýþþõýþýþýþýþýþýýþþýýþ ýüþýþýýþþýþþýýþýýþúýþýþýþþûýþýþýýüþýýþþýþýþýþýüþýýþþýþýüþýýþþýýþýþþýöþýþþýþýþýþþýþüýþýþþýþýþýýþýþþôýþýþýþýýþýýþþýüþýþýýþýóþýþýýþýýþýþýþþýþýýþýþþýþýþþýýþùýþþýýþýýþ ýþþýþþýþýþþýýùþýþýþþýýüþýþýýþýþýþýþýþþýý÷þýþýýþþýþþýüþýþýýþýþýþþýýûþýþþýýþþýýþýýþýþþýþþýýþýþþýýþýýþýýþþýýþýþýýþýýþýýþýýþýþýýþýýþþýýþýþþýýþþýþþüýþýþþýþýþýýþýþþýþýýþýýþúýþýþþýýúþýþþýþþôýþýþýþþýþþýþþýçþýýþýýþýýþþýýþýýþýýþýþýþýýþþýþþþýþþýýþýýþþýýþþýþþ ýþþýýþýþþýþþþýþ þýúþýýþþýýþýþþýýþýþþýþþýýþýýþýýþýýþñýþýþþýýþþýýþýþýýüþýýþþþýþ þýúþýþýýþþýþýýþýþþýþþýýþþýýýþýþ þþýþþþýþþý÷þýþýýþþýþþýþ ýþýýþýþþòýþýýþýþþýýþýþýýüþýþýýþýþýþýþþýþ þýúþýýþþýýýþýþþýþþýýðþýþþýýþýýþýýþýýþþþýþ þþýþþþýþþýþýþýþýþüýþýþþýþûýþþýþþüýþýþþýþýþýþþýýõþýýþýýþýþþýýþþýýþöýþþýþýýþýþþþýþþýþýþýþþýýýþýþþýþýþþýýþýþþýþþþýþþýýþýýüþýþý ýþûýþþýþþýþýýþýþþýþþýþþýþþýþþýúþýýþýþþýýþýýþýþþýýþþýýþþýþþöýþþýþþýþýþþýúþýþýýþþýþýþþýýþþýýþþýýþþýýþýþûýþþýþþýþýýþýþþýþýþüýþþýýþýþüýþýþþþýþþýûþýýþýýþþýþþüýþþýýúþýýþþýýþýúþýþþýþþýþþýþ þýþõýþþýþýþýþýþþúýþþýþýýþýþýýþýýþý þýþýúþýþýýþþûýþýþýýþùýþþýþþýýýþýþþüýþýþþþýþþþýþþþýþþýþýþþýýöþýýþþýýþþýýþýýþýþþþýþþýþþýþþýüþýýþþýéþýþýþýýþýýþþýþýþýþýþþýþ þýþþýþþýûþýýþýýüþýýþþýþýþý þþýþþýþýùþýþýýþýýõþýýþýýþýþþýýþýþýþþýþþþýþþþýþþýûþýýþýýõþýýþþýþýýþýýþýüþýýþþûýþýýþþùýþþýþýþþþýþþýþûýþýýþþýûþýýþýýþþýýþýþþýþþþýþþþýþþýþùýþþýýþýýþýþýúþýþýþýýþþýþþþýþþþýþþýúþýýþþýýþþýýþþýýþýûþýýþýýþýýþýþþþýþþþýþþõýþþýþýþýýþýýþýýþýýþýþþýýþþýýýþýþþ÷ýþýþýýþýþþüýþýþþýþþý ýþýþþýýþýþûýþþýþþþýþþþýþþüýþþýýþýþýþýûþýýþýýþýþþýþþþýþþüýþýþþøýþýþþýþýýñþýþýüýþýýþþýþþýýþýþþýýþþýþþýúþýþþýþþýþþýýþþý ýûþýýþýýþþýýþýþûýþþýþþþýþþýþýúþýýþþýýþüýþþýýþþýýüþýþýýþþýþþþýþþþýþþýøþýýþþýþýýûþýýþýýþýøþýþýýþþýýþþýþþþýþþûýþþýþþýþýþýûþýýþýýþýþýþüýþýþþüýþýþþþýþþýýþýþþýþþýýûþýýþýýüþýýþþýýþýþþþýþþþýþþüýþþýýþþýþþýýþýýþýýþý ýþþýýöþýýþýþþýýþ þýýþýýýþýþþýþýþþýýûþýýþý ýþüýþþýý þýþþýþþýýþýýþþýýþûýþýþýýþþýýúþýþýýþþþýþþ÷ýþþýþþýþýýüþýþýýùþýýþýþýýûþýþþýýþýûþýýþýýþþýþþþýþþýþýþüýþþýýþþýýþúýþþýýþþýýþýþþþýþ þþýþþøýþýýþýýþþýþýúþýüýþýýþþýþþýþúýþþýýþþþýþþýþýþýüþýýþþûýþýýþþýþýûþýýþýýþüýþýþþüýþþýýúþýþýþýýþýúþýýþþý ýþþýþþýýþýýþúýþþýþýýþþý ýþþýýþüýþýþ þþýþþýþýüþýþýýþþýýþýþýþýþþýþþýþüýþýþþýþýþýþýûþýýþýýþþýýþþýþþþýþþýýþýýþýþþýýüþýþýýþþýýþüýþþýýþþýýýþýþþþýþþþýþþþýþþýþþýþþýþþýþþýûþýýþýýøþýþýþýýþþý?þìqrrsttuvmGZy…ÍÄjä Xy„Šž¿ÀÁÁÀÂÃÄÅÅÆÆÈÈÉÉÊËËÌÍÎÎýÏÐÑÑÓÔøÕøqqrrsttôuk 9}¶ÌÉsù/ƒ‚‹¾¿¿ôÁÂÂÃÄÄÅÅÆÆÇÉÉúÊËËÌÍÎÎÐÑÓûÔøpqrrstëmŒÇÌËi0Ÿƒ¾¿¿øÁÂÂÃÃÄÅÆÆûÇÈÉÊËËøÌÍÍÎÎÐÐÑÑÓýÔøppäqrrstte ©ÊËÃq 1‰®ˆŽ¾¿¿ñÀÂÂÃÃÄÅÆÆÇÇÈÉÊËËýÌÍÎÎýÏÐÑÑÓþøppþqrréstcP­Ê˧z !v©†¹¾¾¿üÀÂÂÃÃ÷ÅÆÆÇÇÈÉÊËËøÌÍÍÎÎÏÐÑÑøÓøooppqrrçsd9;\–ÉÊ«u7f‰‘˜ªµ¾¿¿ýÀÁÃÃÅÆúÇÈÈÉÊËËýÌÍÎÎýÏÐÑÑÝønooppqt}„ŠuHSY€ÈµrE 2T¥¢“„³°²¿¿ýÀÂÃÃþÄÆÆúÇÈÈÉÊËËýÌÍÎÎØÏÐÑÑørooprwªºÁ¤SSTt³¸¦vQ A­¬¦´–‡¡¾¿¿ýÀÂÃÃßÄÅÅÆÇ©ÅÉÊÊËËÌÍÍÎÎÏÐÑøÁÁÂÂÃÃÄÄÅÅ­SSêi¦Ç‘wZ J„™Š¥¸¼¾¾¿¿ëÀÁÂÃÃÄÄÅÅÇÇÈÈÉÉÊËËÌÍÎÎçÏÐøÀÁÁÂÂÃû¹©K7;H©Ä}v^ø4}„£º»¼¼¾¿üÀÁÁÃÃõÄÅÆÇÇÈÈÉÊÊËËþÍÎÎüÏøÀÁÁÂ榉Œ¡,ª±vvs! -„³¹ºº»¼¼ý½¾¿¿ÀÈÁÃÃÄÅÅÆÇÇÈÈÉÉÊËËÌÍÍÎÎø´—¬ÁÁ¾Ž‡žŒC>6L¤uvl;8:{–¹¸ºº»¼¼¾¿ùÀÁÂÂÃÄÅÅÇÈÙÉÊÊËËÌÍÎÎøpr¡¼Á¿¸µ¼±¬TSPS—utyn9 +2}·¸¸»¼þ¾¿¿ùÀÁÂÂÃÄÅÅÇÈïÉÊÊËËÌÍÍøƒ¯•”¾ŸÃÃæ«VSS]pttus>#ž·¸¸­±¹ºº¼¼ô½¾¿¿ÀÁÁÂÂÄÄÅÅÇÈÉéÊËËÌÍø¿·–›“±ÂÃâXSSFKttïD  ¡¶¶µ¡³¹¹ºº¼¼þ½¿¿ÀúÁÂÂÄÄÅÅÇÈØÉÊÊËËÌø¾½¶—z»ÁÁÂä['>sttvM)*™«¶±·¸¹¹ýº»¼¼ô½¾¿¿ÀÀÁÂÂÄÄÅÅÇÈÉöÊËËø¾¿º·ÀÁÁÂè¡ :ssyq_)*r°µ¶¶·¸¹¹þº¼¼þ½¿¿ýÀÁÂÂýÃÄÅÅÇÈîÉÊÊËø·¬§¡™’‹¾»„cñ;ssupd t´´¶¶ø·¸¹²¹ºº¼¼þ½¿¿ýÀÁÂÂÄÅÇÈøÉÊÊøkkllþsnnëV5rxw}` s¨´µ¶¶ï·¯™†´ºº»µ•¡½¿¿ÀÁÂÂÄÅÇÈøÉÊøjjkkllçmnn]*t‚ud%F¬®³µ¶¶·ó¹ºº¸¢¥»¾¿ÀÀÁÂÂÄÅÇÈýÉøjjþkllúmnnlOî urstyG|¬³³µ¶¶ý·¸¹¹ºö¸·¼½¾¿ÀÀÁÂÂÄÅÇÈþøjjklûmnhFñ mrrt_'$$`€¬³³þµ¶¶ë·¸¹¹ºº¼¼½¾¾¿ÀÀÁÁÂÂÄÄÅÅÇýøijjklümnIñ bqrr{#{¯°°²³þµ¶¶þ·¹¹ôº»»½½¾¾¿ÀÀÁÂÂÝÃÄÅÅøjllijjr‡~mln`qpuŽY4@u¯¯°°²³þ´¶¶ð·¹¹ºº»»½½¾¾¿¿ÀÁÂÂÝÃÄÅø…vijt•w‚ol`E;Pt‡{{d!@l®¯¯°°²³ö´µ¶¶·²©¶º»»½¾û¿ÀÀÁÂÂÝÃÄøkyolƒ›„’mlo]C`†|‡}e @a­­®¯°°þ²³³ö´¶¶´¥”¥¹º»»½¾ÀþÁÂÂÝÃøhskqršy”sqˆ{: AI˜Žqx]2&9>S¬­­¯¯°°ý±²³³þ´¶¶ú·¸¸¹º»»½¾ÀþÁÂÂâølip–s†Œš”‚{PC 0T•¤ƒ“Ÿ:896L¤uvl;8:{–¹¸ºº»¼¼¾¿ùÀÁÂÂÃÄÅÅÇÈÙÉÊÊËËÌÍÎÎøpr¡¼Á¿¸µ¼±¬TSPS—utyn9 +2}·¸¸»¼þ¾¿¿ùÀÁÂÂÃÄÅÅÇÈïÉÊÊËËÌÍÍøƒ¯•”¾ŸÃÃæ«VSS]pttus>#ž·¸¸­±¹ºº¼¼ô½¾¿¿ÀÁÁÂÂÄÄÅÅÇÈÉéÊËËÌÍø¿·–›“±ÂÃâXSSFKttïD  ¡¶¶µ¡³¹¹ºº¼¼þ½¿¿ÀúÁÂÂÄÄÅÅÇÈØÉÊÊËËÌø¾½¶—z»ÁÁÂä['>sttvM)*™«¶±·¸¹¹ýº»¼¼ô½¾¿¿ÀÀÁÂÂÄÄÅÅÇÈÉöÊËËø¾¿º·ÀÁÁÂè¡ :ssyq_)*r°µ¶¶·¸¹¹þº¼¼þ½¿¿ýÀÁÂÂýÃÄÅÅÇÈîÉÊÊËø·¬§¡™’‹¾»„cñ;ssupd t´´¶¶ø·¸¹²¹ºº¼¼þ½¿¿ýÀÁÂÂÄÅÇÈøÉÊÊøkkllþsnnëV5rxw}` s¨´µ¶¶ï·¯™†´ºº»µ•¡½¿¿ÀÁÂÂÄÅÇÈøÉÊøjjkkllçmnn]*t‚ud%F¬®³µ¶¶·ó¹ºº¸¢¥»¾¿ÀÀÁÂÂÄÅÇÈýÉøjjþkllúmnnlOî urstyG|¬³³µ¶¶ý·¸¹¹ºö¸·¼½¾¿ÀÀÁÂÂÄÅÇÈþøjjklûmnhFñ mrrt_'$$`€¬³³þµ¶¶ë·¸¹¹ºº¼¼½¾¾¿ÀÀÁÁÂÂÄÄÅÅÇýøijjklümnIñ bqrr{#{¯°°²³þµ¶¶þ·¹¹ôº»»½½¾¾¿ÀÀÁÂÂÝÃÄÅÅøjllijjr‡~mln`qpuŽY4@u¯¯°°²³þ´¶¶ð·¹¹ºº»»½½¾¾¿¿ÀÁÂÂÝÃÄÅø…vijt•w‚ol`E;Pt‡{{d!@l®¯¯°°²³ö´µ¶¶·²©¶º»»½¾û¿ÀÀÁÂÂÝÃÄøkyolƒ›„’mlo]C`†|‡}e @a­­®¯°°þ²³³ö´¶¶´¥”¥¹º»»½¾ÀþÁÂÂÝÃøhskqršy”sqˆ{: AI˜Žqx]2&9>S¬­­¯¯°°ý±²³³þ´¶¶ú·¸¸¹º»»½¾ÀþÁÂÂâølip–s†Œš”‚{PC 0T•¤ƒ“Ÿ:896L¤uvl;8:{–¹¸ºº»¼¼¾¿ùÀÁÂÂÃÄÅÅÇÈÙÉÊÊËËÌÍÎÎøpr¡¼Á¿¸µ¼±¬TSPS—utyn9 +2}·¸¸»¼þ¾¿¿ùÀÁÂÂÃÄÅÅÇÈïÉÊÊËËÌÍÍøƒ¯•”¾ŸÃÃæ«VSS]pttus>#ž·¸¸­±¹ºº¼¼ô½¾¿¿ÀÁÁÂÂÄÄÅÅÇÈÉéÊËËÌÍø¿·–›“±ÂÃâXSSFKttïD  ¡¶¶µ¡³¹¹ºº¼¼þ½¿¿ÀúÁÂÂÄÄÅÅÇÈØÉÊÊËËÌø¾½¶—z»ÁÁÂä['>sttvM)*™«¶±·¸¹¹ýº»¼¼ô½¾¿¿ÀÀÁÂÂÄÄÅÅÇÈÉöÊËËø¾¿º·ÀÁÁÂè¡ :ssyq_)*r°µ¶¶·¸¹¹þº¼¼þ½¿¿ýÀÁÂÂýÃÄÅÅÇÈîÉÊÊËø·¬§¡™’‹¾»„cñ;ssupd t´´¶¶ø·¸¹²¹ºº¼¼þ½¿¿ýÀÁÂÂÄÅÇÈøÉÊÊøkkllþsnnëV5rxw}` s¨´µ¶¶ï·¯™†´ºº»µ•¡½¿¿ÀÁÂÂÄÅÇÈøÉÊøjjkkllçmnn]*t‚ud%F¬®³µ¶¶·ó¹ºº¸¢¥»¾¿ÀÀÁÂÂÄÅÇÈýÉøjjþkllúmnnlOî urstyG|¬³³µ¶¶ý·¸¹¹ºö¸·¼½¾¿ÀÀÁÂÂÄÅÇÈþøjjklûmnhFñ mrrt_'$$`€¬³³þµ¶¶ë·¸¹¹ºº¼¼½¾¾¿ÀÀÁÁÂÂÄÄÅÅÇýøijjklümnIñ bqrr{#{¯°°²³þµ¶¶þ·¹¹ôº»»½½¾¾¿ÀÀÁÂÂÝÃÄÅÅøjllijjr‡~mln`qpuŽY4@u¯¯°°²³þ´¶¶ð·¹¹ºº»»½½¾¾¿¿ÀÁÂÂÝÃÄÅø…vijt•w‚ol`E;Pt‡{{d!@l®¯¯°°²³ö´µ¶¶·²©¶º»»½¾û¿ÀÀÁÂÂÝÃÄøkyolƒ›„’mlo]C`†|‡}e @a­­®¯°°þ²³³ö´¶¶´¥”¥¹º»»½¾ÀþÁÂÂÝÃøhskqršy”sqˆ{: AI˜Žqx]2&9>S¬­­¯¯°°ý±²³³þ´¶¶ú·¸¸¹º»»½¾ÀþÁÂÂâølip–s†Œš”‚{PC 0T•¤ƒ“Ÿ:89þ@@vigor-0.016.orig/vigor/v2cp0003.xbm0100664000076400007640000003115707103707232015313 0ustar cjw44cjw44/* Vigor morphing */ #define v2cp0003_width 128 #define v2cp0003_height 128 static char v2cp0003_bits[] = { 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x94, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x24, 0x49, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x22, 0x24, 0x11, 0x00, 0x00, 0x00, 0x02, 0x00, 0x01, 0x25, 0x89, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa4, 0x24, 0xa2, 0xaa, 0x2a, 0x49, 0x50, 0x12, 0x10, 0x00, 0x00, 0x24, 0x11, 0x00, 0x00, 0x00, 0x12, 0x91, 0x04, 0x00, 0x80, 0x20, 0x05, 0x40, 0x02, 0x44, 0x08, 0x01, 0x80, 0x00, 0x00, 0x00, 0x44, 0x84, 0x54, 0x55, 0x15, 0x05, 0x90, 0x0a, 0xa4, 0x80, 0x50, 0x00, 0x00, 0x24, 0x00, 0x00, 0x92, 0x12, 0x42, 0x00, 0x40, 0x90, 0x04, 0x20, 0x00, 0x04, 0x02, 0x45, 0x02, 0x00, 0x00, 0x00, 0x24, 0xa4, 0x88, 0xaa, 0x0a, 0x12, 0x50, 0x82, 0x8a, 0xb0, 0x28, 0x00, 0x10, 0x40, 0x04, 0x00, 0x4a, 0x09, 0x25, 0x04, 0x50, 0x40, 0x01, 0x48, 0x09, 0x04, 0x82, 0x0a, 0x80, 0x00, 0x00, 0x00, 0x48, 0x52, 0xa4, 0xa8, 0x82, 0x0a, 0x4a, 0xa9, 0xb2, 0x24, 0x00, 0x21, 0x02, 0x00, 0x40, 0x00, 0x92, 0x24, 0x11, 0x01, 0x14, 0x90, 0x80, 0xfa, 0xbf, 0x82, 0x04, 0x02, 0x00, 0x02, 0x00, 0x00, 0x92, 0x44, 0x22, 0x55, 0xa1, 0x12, 0xb9, 0xff, 0xff, 0x17, 0x25, 0x02, 0x24, 0x40, 0x04, 0x00, 0x24, 0x29, 0x89, 0x00, 0x04, 0x40, 0x76, 0xb5, 0xd5, 0x7f, 0x80, 0x48, 0x00, 0x04, 0x00, 0x01, 0x25, 0x22, 0x12, 0x55, 0xa9, 0x0a, 0x6c, 0x0f, 0xd4, 0xff, 0x12, 0x01, 0x00, 0x00, 0x00, 0x00, 0x48, 0x49, 0x49, 0x08, 0x04, 0xd0, 0x37, 0x90, 0x54, 0xf8, 0x45, 0x88, 0x24, 0x88, 0x10, 0x00, 0x29, 0x12, 0x92, 0x52, 0x51, 0x85, 0xae, 0x92, 0x48, 0x51, 0xa7, 0x09, 0x80, 0x00, 0x00, 0x04, 0x42, 0x49, 0x49, 0x08, 0x02, 0xfa, 0x03, 0x49, 0x22, 0xa4, 0x9d, 0x12, 0x00, 0x00, 0x02, 0x00, 0x4a, 0x22, 0x88, 0x52, 0x54, 0xe2, 0x2b, 0x89, 0x4a, 0xa9, 0x5f, 0x52, 0x09, 0x11, 0x40, 0x00, 0x94, 0x94, 0x52, 0x88, 0x82, 0xa8, 0x55, 0x52, 0x52, 0x42, 0x2f, 0x21, 0x00, 0x00, 0x00, 0x00, 0x91, 0xa4, 0x84, 0x22, 0xa8, 0xb2, 0x92, 0x52, 0x0a, 0x49, 0x3e, 0x01, 0x21, 0x20, 0x04, 0x04, 0x4a, 0x12, 0x29, 0x94, 0x42, 0x7d, 0x29, 0xa5, 0xb2, 0x22, 0x5d, 0x24, 0x04, 0x01, 0x00, 0x00, 0x52, 0x52, 0x42, 0x21, 0x4a, 0x79, 0x21, 0x89, 0x52, 0xaa, 0xb8, 0x41, 0x01, 0x84, 0x40, 0x00, 0x44, 0x89, 0x94, 0x94, 0x90, 0xb4, 0x4a, 0xa5, 0x4a, 0x55, 0x7d, 0x12, 0x24, 0x00, 0x04, 0x08, 0x15, 0x92, 0x24, 0x91, 0x22, 0xbd, 0x28, 0x95, 0xa2, 0x12, 0x72, 0x2a, 0x81, 0x10, 0x00, 0x00, 0xa4, 0x24, 0x49, 0x22, 0xa4, 0x16, 0x45, 0x21, 0x55, 0x45, 0x7d, 0x55, 0x0a, 0x04, 0x48, 0x00, 0x55, 0x29, 0x49, 0x4a, 0x49, 0x7e, 0x55, 0xad, 0x2a, 0x15, 0x71, 0x20, 0x12, 0x80, 0x80, 0x00, 0x88, 0xa2, 0x24, 0x11, 0x32, 0x5d, 0x29, 0x42, 0xa4, 0x6a, 0xfc, 0x8a, 0x90, 0x10, 0x00, 0x04, 0x2a, 0x0a, 0x49, 0x52, 0x52, 0x5e, 0xaa, 0x9a, 0xa9, 0xa4, 0xf1, 0x34, 0x11, 0x00, 0x02, 0x08, 0x52, 0xa9, 0x24, 0x89, 0x94, 0xbe, 0xa5, 0x4a, 0x2a, 0x55, 0x56, 0x49, 0x01, 0x21, 0x10, 0x00, 0x44, 0x92, 0x24, 0x29, 0x11, 0xaf, 0x5a, 0xd5, 0xaa, 0xaa, 0xf4, 0x49, 0x2a, 0x04, 0x40, 0x00, 0x29, 0x25, 0x49, 0x42, 0xea, 0x97, 0xa4, 0x2a, 0x55, 0x55, 0xf5, 0x52, 0x85, 0x40, 0x00, 0x08, 0xa5, 0x48, 0x92, 0x94, 0x10, 0x5e, 0xa9, 0xea, 0xaf, 0x52, 0xf5, 0x2b, 0x08, 0x80, 0x84, 0x00, 0x4a, 0x95, 0x24, 0x25, 0xd5, 0xaf, 0xaa, 0xfa, 0xbf, 0x4a, 0xf1, 0x24, 0x45, 0x0a, 0x00, 0x20, 0x28, 0x52, 0x49, 0x48, 0x4a, 0xbf, 0xaa, 0xfe, 0xff, 0x55, 0xf5, 0x21, 0x09, 0x10, 0x10, 0x02, 0xa5, 0x24, 0xa5, 0x12, 0x55, 0xaf, 0xaa, 0xff, 0xff, 0x55, 0xfa, 0x55, 0x24, 0x40, 0x02, 0x00, 0x4a, 0x25, 0x89, 0x24, 0x51, 0xbf, 0xaa, 0xbf, 0xfa, 0xa7, 0xf2, 0x55, 0x48, 0x02, 0x40, 0x00, 0x92, 0x94, 0x54, 0x52, 0x45, 0xd7, 0xd6, 0xaf, 0xea, 0xaf, 0x7a, 0xa1, 0x00, 0x08, 0x04, 0x12, 0xaa, 0x24, 0x89, 0x84, 0x54, 0x5f, 0x55, 0xaf, 0xaa, 0xa7, 0xf4, 0x8b, 0x94, 0x90, 0x08, 0x00, 0x92, 0xaa, 0x52, 0xaa, 0xd2, 0xbf, 0xaa, 0x53, 0x55, 0x97, 0xfa, 0x20, 0x08, 0x08, 0x40, 0x00, 0x54, 0x22, 0x4a, 0x91, 0x14, 0x7f, 0xa5, 0xad, 0xaa, 0x8e, 0xfa, 0x65, 0x21, 0x21, 0x00, 0x12, 0x49, 0x55, 0x11, 0x4a, 0xd6, 0x5e, 0xe5, 0x54, 0x55, 0x1b, 0xfd, 0x49, 0x05, 0x48, 0x12, 0x00, 0x52, 0x44, 0x52, 0xa9, 0x52, 0x7f, 0xa5, 0x55, 0x55, 0x2a, 0xf8, 0x13, 0x24, 0x01, 0x80, 0x00, 0xa5, 0xaa, 0x2a, 0x45, 0x89, 0xbf, 0x7a, 0x55, 0x95, 0xf6, 0xde, 0xa5, 0x01, 0x20, 0x22, 0x24, 0x2a, 0x89, 0x44, 0x94, 0xaa, 0xfe, 0x4a, 0x4a, 0x55, 0x95, 0xfd, 0x25, 0xaa, 0x44, 0x00, 0x00, 0x52, 0x2a, 0xa9, 0x52, 0x29, 0xbf, 0x07, 0x2c, 0xa5, 0x40, 0xff, 0x85, 0x00, 0x00, 0x42, 0x00, 0x4a, 0xa9, 0x4a, 0x92, 0xaa, 0xbe, 0x05, 0x20, 0xc4, 0x00, 0xfc, 0x5b, 0x49, 0x12, 0x08, 0x12, 0x52, 0x92, 0x24, 0xa5, 0x94, 0xff, 0x01, 0x30, 0x31, 0x00, 0xbe, 0x25, 0x00, 0x40, 0x40, 0x00, 0x55, 0x25, 0xa9, 0xa4, 0xaa, 0xfe, 0x00, 0x20, 0x25, 0x08, 0xf8, 0x25, 0x25, 0x85, 0x04, 0x02, 0x92, 0xaa, 0x12, 0x49, 0x95, 0x3f, 0xa0, 0x61, 0x15, 0x37, 0xf8, 0x15, 0x00, 0x10, 0x40, 0x08, 0x55, 0x92, 0x54, 0x95, 0x96, 0x7e, 0x61, 0x4b, 0x1d, 0x2e, 0xf8, 0x4b, 0x29, 0x01, 0x09, 0x10, 0x52, 0x55, 0x49, 0x52, 0xaa, 0x5f, 0xd8, 0xf3, 0x1a, 0x35, 0xf0, 0x89, 0x00, 0x24, 0x40, 0x00, 0x4a, 0x92, 0x92, 0x44, 0x2a, 0xbe, 0x50, 0x47, 0x1a, 0x2f, 0xe0, 0x29, 0xa5, 0x00, 0x09, 0x12, 0xaa, 0x2a, 0x55, 0xa9, 0xbe, 0x8f, 0xb0, 0xf1, 0x1a, 0x35, 0xf8, 0xfb, 0x10, 0x12, 0x40, 0x00, 0x2a, 0xa9, 0x24, 0x95, 0xb6, 0x2e, 0xb1, 0x63, 0x35, 0x0c, 0xe0, 0xdf, 0x47, 0xa0, 0x84, 0x10, 0x52, 0x25, 0x55, 0xa9, 0xea, 0x4f, 0x62, 0x75, 0x35, 0x00, 0xfc, 0x2a, 0x05, 0x15, 0x10, 0x02, 0x55, 0xaa, 0x44, 0x4a, 0x89, 0x9d, 0x04, 0x60, 0x75, 0x00, 0xf8, 0x0b, 0x2a, 0x00, 0x01, 0x10, 0x92, 0x52, 0xa9, 0x30, 0x55, 0x27, 0x51, 0x75, 0xeb, 0x40, 0xff, 0x20, 0x85, 0x48, 0x24, 0x02, 0x55, 0x25, 0x95, 0x26, 0x65, 0x3f, 0x45, 0x5a, 0xd5, 0xdb, 0xff, 0x4b, 0x08, 0x01, 0x40, 0x10, 0xaa, 0xaa, 0x52, 0x59, 0xaa, 0x7f, 0x28, 0xbd, 0x6a, 0xbf, 0xff, 0xa4, 0x22, 0x94, 0x04, 0x02, 0x4a, 0x2a, 0x25, 0x51, 0x15, 0xfe, 0xfb, 0x57, 0x55, 0x5f, 0xfa, 0x55, 0x80, 0x00, 0x48, 0x20, 0xaa, 0xa4, 0x4a, 0x95, 0xea, 0xff, 0xff, 0xb7, 0x55, 0xaf, 0xfd, 0x29, 0x15, 0x52, 0x00, 0x02, 0xaa, 0x2a, 0xa9, 0x24, 0x09, 0xfd, 0xf3, 0x55, 0xad, 0xbe, 0xfa, 0x43, 0x40, 0x02, 0x49, 0x10, 0x52, 0x55, 0x95, 0x5a, 0xb5, 0x6f, 0xf5, 0x55, 0x55, 0x5f, 0xfd, 0x14, 0x15, 0x48, 0x00, 0x05, 0x55, 0x52, 0x52, 0x22, 0x2b, 0xfe, 0xe2, 0xb7, 0xb5, 0xbe, 0xf8, 0x53, 0x20, 0x09, 0x2a, 0x20, 0x4a, 0xa5, 0x4a, 0xb5, 0xaa, 0x7f, 0xf5, 0x54, 0x55, 0x5f, 0xfe, 0x14, 0x85, 0xa0, 0x00, 0x02, 0x55, 0x4d, 0x95, 0xa4, 0x52, 0xf7, 0xd5, 0x57, 0xab, 0x7c, 0xf8, 0x25, 0x10, 0x04, 0x44, 0x10, 0xaa, 0x54, 0xaa, 0xaa, 0x56, 0xbf, 0xea, 0x6c, 0x55, 0x3f, 0xfc, 0x45, 0x45, 0x91, 0x10, 0x45, 0x55, 0xa9, 0x52, 0x92, 0x54, 0x7e, 0xdb, 0xaa, 0x5a, 0x7d, 0xf9, 0x1b, 0x08, 0x12, 0x02, 0x00, 0xaa, 0x4a, 0x95, 0x2a, 0x8d, 0xbf, 0x6e, 0xd5, 0x56, 0x3d, 0xfc, 0x49, 0x51, 0x40, 0x28, 0x12, 0x4a, 0x55, 0xaa, 0x52, 0x39, 0xfd, 0x6c, 0x5a, 0xb5, 0x5d, 0xf9, 0x13, 0x02, 0x0a, 0x41, 0x00, 0x55, 0x55, 0x29, 0xa5, 0xa4, 0xaf, 0x5e, 0xa0, 0xaa, 0x2a, 0xf5, 0x55, 0xa9, 0x20, 0x04, 0x25, 0x55, 0x55, 0xa5, 0x94, 0xaa, 0xbe, 0xfa, 0x85, 0x56, 0x78, 0xfa, 0x13, 0x01, 0x89, 0x28, 0x00, 0x2a, 0x49, 0x55, 0xa5, 0x52, 0x7f, 0x3d, 0x28, 0x00, 0x55, 0xf4, 0xab, 0x94, 0x20, 0x82, 0x24, 0x55, 0x55, 0x95, 0xaa, 0x4a, 0x7f, 0x7d, 0x41, 0x55, 0x78, 0xf5, 0x17, 0x10, 0x45, 0x10, 0x04, 0xaa, 0x2a, 0xa9, 0x94, 0xd6, 0x5f, 0xbf, 0x14, 0x80, 0x7a, 0xf6, 0xa3, 0x42, 0x08, 0x45, 0x10, 0x55, 0x55, 0x55, 0x25, 0xa9, 0xde, 0xbc, 0x68, 0x15, 0x69, 0x75, 0x0f, 0x08, 0x21, 0x80, 0x22, 0xaa, 0xaa, 0x4a, 0x59, 0x55, 0xbf, 0x7e, 0x4a, 0x45, 0x5a, 0xf5, 0xa3, 0x52, 0x94, 0x0a, 0x00, 0xaa, 0xaa, 0xaa, 0x52, 0x4a, 0x5d, 0x7d, 0x49, 0x49, 0x70, 0xed, 0x27, 0x02, 0x01, 0xa0, 0x24, 0x55, 0xa9, 0x94, 0x4a, 0xa9, 0xbf, 0x7e, 0x25, 0x2a, 0xad, 0xf5, 0x93, 0xa8, 0x54, 0x05, 0x02, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x5d, 0x7d, 0x41, 0x28, 0xf8, 0x6a, 0x27, 0x02, 0x00, 0x50, 0x28, 0x55, 0x55, 0x55, 0x4a, 0xc9, 0xbf, 0xbe, 0x15, 0x41, 0xf9, 0xfa, 0x93, 0x54, 0x55, 0x05, 0x01, 0x55, 0x55, 0xa9, 0x54, 0x15, 0xbe, 0xbe, 0x46, 0x2a, 0xfd, 0xe5, 0x27, 0x01, 0x00, 0x20, 0x24, 0xaa, 0xaa, 0xaa, 0x2a, 0xd5, 0x5f, 0x7d, 0x55, 0xad, 0xfa, 0xfa, 0x8b, 0x5c, 0x55, 0x85, 0x00, 0xaa, 0xaa, 0xaa, 0x4a, 0x29, 0x7e, 0x7b, 0x5b, 0x6b, 0xfb, 0xe5, 0x97, 0x40, 0x04, 0x28, 0x2a, 0x55, 0x55, 0xa5, 0x54, 0xd5, 0x5f, 0xdf, 0x6a, 0x55, 0xfd, 0xba, 0x4b, 0x0a, 0xa9, 0x82, 0x00, 0xaa, 0x52, 0x55, 0x55, 0x15, 0xbd, 0x5e, 0x5b, 0x6d, 0xf5, 0xf3, 0x4b, 0x28, 0x01, 0x92, 0x24, 0x55, 0x55, 0x55, 0x95, 0xd4, 0x5e, 0xbf, 0xd6, 0xaa, 0xfd, 0xea, 0x8b, 0x42, 0x54, 0x08, 0x02, 0x55, 0x55, 0x55, 0x55, 0x55, 0xbf, 0xbe, 0xaa, 0xad, 0xf2, 0xd6, 0x2b, 0x14, 0x01, 0x51, 0x28, 0xaa, 0xaa, 0xaa, 0x54, 0x49, 0x5f, 0xcf, 0xb6, 0x2a, 0xfd, 0xe9, 0x46, 0xa1, 0x54, 0x04, 0x01, 0x55, 0x55, 0x55, 0x95, 0xaa, 0x5c, 0xbe, 0x6a, 0xeb, 0xf2, 0xeb, 0x17, 0x8a, 0x04, 0x21, 0x2a, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xde, 0x5e, 0xad, 0x9a, 0xee, 0xd5, 0xa2, 0x10, 0x52, 0x94, 0x00, 0xab, 0xaa, 0x52, 0x55, 0xa5, 0x5e, 0xbf, 0x55, 0x55, 0xf9, 0xeb, 0x8f, 0x52, 0x44, 0x11, 0x2a, 0x5a, 0x55, 0xad, 0xaa, 0x54, 0x5b, 0x4f, 0xdb, 0x9a, 0x76, 0xd5, 0x53, 0x44, 0x29, 0x44, 0x00, 0x55, 0x55, 0x49, 0xa9, 0x4a, 0x5e, 0x6e, 0x55, 0xb5, 0xe4, 0xd5, 0x07, 0x11, 0x81, 0x88, 0x2a, 0xaa, 0xaa, 0x56, 0x55, 0x55, 0x5b, 0x5f, 0x95, 0xaa, 0xda, 0xaa, 0x56, 0x4a, 0x54, 0x22, 0x00, 0xb5, 0xaa, 0x54, 0xa5, 0xaa, 0x5e, 0xad, 0xaa, 0x4a, 0xd2, 0xd2, 0xa7, 0x88, 0x84, 0x88, 0x2a, 0x55, 0x55, 0xab, 0x5a, 0x55, 0xad, 0x57, 0x51, 0xb3, 0xca, 0xe5, 0x0a, 0x25, 0x29, 0x52, 0x40, 0xab, 0x55, 0x55, 0xa5, 0x4a, 0x3d, 0x56, 0x55, 0x55, 0x92, 0x89, 0x57, 0x24, 0x41, 0x02, 0x0a, 0x5a, 0xad, 0xaa, 0xaa, 0x54, 0xcd, 0x97, 0x52, 0xa9, 0x44, 0xe4, 0x27, 0x49, 0x2a, 0xa9, 0x10, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x9a, 0xae, 0xa4, 0x2a, 0x15, 0x09, 0x2d, 0x89, 0x20, 0x82, 0x22, 0x55, 0x55, 0x55, 0x55, 0x55, 0xa5, 0x53, 0x12, 0x51, 0x49, 0xe4, 0xa3, 0x24, 0x45, 0x14, 0x04, 0x6d, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xaf, 0x24, 0x45, 0x92, 0x04, 0x8f, 0x24, 0x49, 0xa1, 0x28, 0x55, 0x5b, 0x55, 0x55, 0xa5, 0xaa, 0x17, 0x49, 0x95, 0x2a, 0xd1, 0x55, 0x92, 0x24, 0x0a, 0x41, 0x55, 0x55, 0xab, 0xaa, 0xaa, 0x4a, 0x56, 0x49, 0xb4, 0x4a, 0x92, 0x97, 0x12, 0x89, 0x50, 0x0a, 0x6d, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x0d, 0x25, 0xd3, 0x12, 0xe9, 0x22, 0xa5, 0x24, 0x85, 0x28, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x12, 0x5d, 0x48, 0xa4, 0x52, 0xc2, 0x4b, 0x88, 0x48, 0x28, 0x02, 0xd5, 0x56, 0xad, 0xaa, 0xaa, 0xaa, 0x97, 0x52, 0x55, 0x85, 0x6a, 0x57, 0x55, 0x92, 0x42, 0x29, 0x5b, 0xd5, 0xaa, 0xaa, 0xaa, 0x22, 0x2e, 0x95, 0x54, 0x55, 0xc9, 0x22, 0x45, 0x92, 0x14, 0x21, 0x56, 0xad, 0x5a, 0x55, 0x55, 0xd5, 0xdb, 0x54, 0x12, 0x22, 0x75, 0xab, 0x28, 0x49, 0x22, 0x0a, 0x6a, 0x55, 0x55, 0x55, 0xb5, 0x04, 0x97, 0x51, 0xb5, 0x54, 0x62, 0x23, 0x45, 0x49, 0xa4, 0x20, 0xd5, 0xda, 0x6a, 0x55, 0x6f, 0x69, 0x7b, 0xaa, 0x4a, 0xa5, 0xfd, 0x94, 0x28, 0x22, 0x09, 0x15, 0xad, 0x55, 0x55, 0xd5, 0x6a, 0xab, 0xd6, 0xa5, 0x56, 0xaa, 0xee, 0x21, 0xa5, 0x24, 0x29, 0x21, 0x55, 0x55, 0xab, 0x55, 0x5f, 0x55, 0x7d, 0x5a, 0x55, 0xd5, 0xbb, 0x4a, 0x52, 0x45, 0x42, 0x14, 0xb6, 0xb6, 0xaa, 0x6a, 0xd5, 0x5a, 0xfb, 0xd7, 0x56, 0xea, 0x7f, 0x4a, 0x8a, 0x4a, 0x94, 0x22, 0xad, 0x55, 0x5b, 0xd5, 0xb6, 0x57, 0xbd, 0x7d, 0xad, 0xfe, 0x8f, 0x94, 0xa8, 0x92, 0x22, 0x44, 0x6a, 0x55, 0xd5, 0x56, 0x6d, 0xed, 0xf2, 0xf7, 0xff, 0xfb, 0xbf, 0x92, 0x12, 0x55, 0xa4, 0x14, 0xad, 0xb6, 0xaa, 0xaa, 0xaa, 0xb5, 0x56, 0xff, 0xff, 0xff, 0x6b, 0x55, 0x54, 0x81, 0x12, 0x21, 0xab, 0xad, 0xad, 0xaa, 0x6a, 0xad, 0x55, 0xac, 0xff, 0x57, 0xa9, 0x95, 0x52, 0x57, 0x24, 0x25, 0x5a, 0xb5, 0x6a, 0x55, 0x55, 0xab, 0x54, 0x55, 0xfd, 0x2a, 0x55, 0xab, 0x2a, 0x24, 0x49, 0x08, 0xd6, 0xaa, 0xaa, 0xd6, 0xaa, 0xaa, 0xaa, 0x52, 0x81, 0x52, 0x2a, 0xb5, 0xd2, 0x4a, 0x49, 0x29, 0xad, 0xb5, 0x6d, 0x55, 0x55, 0x55, 0x55, 0x55, 0xad, 0xa4, 0x52, 0xaa, 0x25, 0x25, 0x12, 0x21, 0x6a, 0x6d, 0x55, 0xad, 0x56, 0x55, 0x55, 0x55, 0xa9, 0xaa, 0x44, 0x25, 0xad, 0xa4, 0x24, 0x25, 0x5b, 0xab, 0x6a, 0x55, 0xb5, 0xaa, 0xaa, 0x4a, 0x55, 0x25, 0x55, 0x4a, 0x55, 0x5b, 0x4b, 0x12, 0x6a, 0xd5, 0x56, 0xdb, 0xaa, 0xaa, 0xaa, 0x54, 0x25, 0x55, 0x95, 0x52, 0xa5, 0x42, 0x92, 0x24, 0xd7, 0xb6, 0xb5, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0x55, 0xa9, 0xa4, 0x14, 0x92, 0x94, 0x24, 0x12, 0xb5, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x5a, 0x55, 0x55, 0x25, 0x95, 0xd2, 0xa4, 0x94, 0xa4, 0x24, 0xad, 0xaa, 0x6d, 0x5b, 0x5b, 0x55, 0xa5, 0x4a, 0x4a, 0x55, 0x55, 0x4a, 0x15, 0x51, 0x12, 0x49, 0xb5, 0x6d, 0x55, 0xb5, 0xaa, 0x55, 0x55, 0x55, 0x55, 0xaa, 0xa4, 0x2a, 0xa4, 0x8a, 0x52, 0x12 }; vigor-0.016.orig/vigor/v2cp0004.xcf0100664000076400007640000017112107103707233015303 0ustar cjw44cjw44gimp xcf file€€BB_€€ Backgroundÿ     €€&òE€€B:Ðw¾´zÛ¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÉþÊËËÝÌÍÍÎÏÐÐÑÒÒÓÓÔÔÕÕ¯¯°°±²²³´´µµ¶··¸¹¹ºº»ü¼½¾¿¿øÀÁÁÂÂÃÄÅÅëÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓÔ¯°°±²²³´´µµ¶··¸¹¹º»ü¼½½¿¿ãÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓìÔ­®¯¯°°±²²³´´µµ¶··¸¹¹ºú»¼¼½¾¿¿æÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÒӭﮯ¯°°±²²³´´µµ¶··¸¸÷¹ºº»¼¼½½¿¿ãÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÐÒÒíÓ¬­­®¯¯°°±²²³´´µµ¶··õ¸¹¹ºº»¼¼½½¿¿äÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÒÒí«¬­­®¯¯°°±²²³´´µµ¶··ù¸¹¹ºº»¼¼þ½¿¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉõÊËËÌÌÍÍÎÏÏÑÑÞÒ««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»»¼½½¿¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉöÊËÌÌÍÎÎÏÏÑÑÞª««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»¼¼½½¿¿òÀÁÁÂÂÃÃÄÅÆÆÇÇÉÉÊÃËÌÌÍÎÎÏÐÏ˪ª««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»¼¼½½¿¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÈÉÉÊüËÌÌÍÍìź©ªª««¬­­®¯¯°°±²²³´´ðµ¶¶··¸¸¹ºº»¼¼½½¿¿ôÀÁÁÂÂÃÄÄÅÅÆÈÈÉÓÊË̾ ¡˜¦¨©ªª««¬­­®¯¯°°±²²³²³´µ¶¶··¸¸¹ºº»¼¼½½¿¿ÖÀÁÁÂÂÃÄÄÅÅÆÇÈÈÉÉ““‰Q ¨¨©ªª««¬­­®¯¯°°±²²å³´µ¶¶··¸¸¹ºº»¼¼½¾¾¿¿ÀÁÁÂÂÃÄÄàÆÇ“Œj  §¨¨©ªª««¬­­®¯¯°°±²²³à´µ¶¶··¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÃÄÄ—iæ  ¦§¨¨©ªª««¬­­®®¯°°±²²ã³´µ¶¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂó…Üdlic¦¦§¨¨©ªª««¬­­®®¯°°±±²²³³´´¶¶··í¸¹ºº»¼¼½½¾¾½¿»ÁÂÁùc~t|§ÀÉÉ¦§¨¨©ªª««¬­­®®¯°°ã±²²³³´´¶¶··¸¸¹ºº»¼¼½¼µ±«°µ¾âl¡ÀøŷÆÉÈÄ¥¥¦¦§¨¨©©ª««¬­­®®¯°°±ò²³³´µ¶¶··¸¸¹º»»Ô¼´¯°«¬± h¢ÀÆÅ¿½Â¾ÉÁ¹Ê¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯Ã°±²²³³´µ¶¶··¸¸¹ºº»®­º¹¼¾? w½¾·ÂÅÀ¿½¿Å¸Å¿£¤¥¥¦¦§¨¨©©ª««¬­­®®Á¯°°±²²³³´´¶¶··¸¸¹º¹¨±»½¾``¨¹³½µ¹µ»´¾Â¼Æ¸££¤¤¥¦¦§¨¨©©ª««¬­­®®ç¯°°±²²³³´µ¶¶··¸¹¹°¯³¬µuÞM¬­­°·¼²¶Á²¼Â½¾½¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±²²³³´µµ¶¶·¸·¦§ª¯™T*œ¶­¾­¸¼º¸³À°±´µ¾¡¢££¤¤¥¦¦§¨¨©©ª««¬­­„®¯¯°±²²³³´µµ¶¶··¥©²¹( r¯±¿¼¶²À¼²³¼»¹³²¶¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯°°±²²³³´µµ¶·µ¨¶¸­@Fª®¹¿½¼­¿º¯³»¾¿¶À² ¡¡¢££¤¤¥¦¦§¨¨©©ª««ñ¬­­®®¯°°±±²³³´µµÒ£¥©ª€ ´±°«µ¾º±®¹¯´¸Â»¶¾±Ÿ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®Å¯°°±±²²³´´µµ£§­§ˆ ²¼º¶²¸»±¬¾­´µ¾µ¼º°ŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®þ¯°°É±²³³´µ£¥µµ¶d ®©¸¸³µ´·¯®«³¯¼º¿´¯žŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®Å¯°°±±²³³§¢²¶¶œ  £¨§§°¶·¯¯«­¸µ®¶º¼®¯žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««û­®®¯°°ö±²³¡¢³´¶›¼©³§§«¹©©«º¼««¬½Á®¯žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª©««¬­®®¯°°±±²¡¡³³°r —¥§§ß¨¶¬¨¯µ­««­¿¾±°œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨ý©ª««Á¬­®®¯°°±¯¯³ £— ¡©¥§¥ª¦§´¨ª«ªª«¯Ã²¬±œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««·¬­®®¯°°±± £°– 3¡¤¤¦¦¬¬§¦§¨¨©ªª²±«¬­›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨¨©ª« ª«­®®¯°°ŸŸòªš Š¥©­«©¶¦¦ù§¨¨©ªª««ä¬š›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««Á¬­®®¯ ž°¬¡š€¢ª¨¥ª©¤¥¥¦§§¨©ªœ~€šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨¨©ª««á­®Ÿ­­žŸ–w¢¢£§²¨£¤¥¥¦¦§{o<㙚š›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨¨©ª««ì¬ ¨­¨ž­¢“ $p¡¢¢¤§££ú¤¥¥}X™šÖ›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©ª««ª¢©®±®¡’  a¡¡ý¢¤££ý¤eј™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦ª§§¨©©ª« ¦¬¢¬®ªœ”U ¡¡¢û£ŠhÅ<<—˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©££§«¬«œ›œOŸ  ¡¡¢¢ƒ ÍV»½½‘’’““”••–——˜˜™šš›œœŸ ¡í¢£¤™“”• ¦š½ëþþýþÜÖ¬3=»¼½‘’’““”••–——˜˜™šš››œžŸŸ  ¡¡ï£¤˜“¡¦Ÿ•ŽÂêýýàßÁ±£—öóöÎ<âää¹nŽŽ‘’’““”••–——˜˜š›äœŽœŸŸ  ¡n7”‰y Òãäåýå5ã=ßãä¼1¨ŽŽ‘’’““”••––—˜˜š›åœžŸŸ”šk=¡’’ž Nàãäçýè=â>àæäÁ& ¤¬ŽŽ‘’’““”••––—˜˜š›ìœž’›’›¡“‘¦‘™ MßããüåìEãIíñêÅ,žŸŒŽŽ‘’’““”••––—˜˜š›íœ¡’›Ÿ  “ ¡‘‡ IÞããûæñc5 ¸êëçpœŸ‹ŒŽŽ‘’’““”••––——˜˜šš››œ™žŸŸ“” ¡‘œ†!CÞßäãäÝç“‘ÄáääÔv‰ž‹‹ŒŽŽ‘‘’““”••––—˜˜š›ÅŽšžŸ‘ž –”œ†!4!µääãäãêëããäãäãÆ„›Š‹‹ŒŽŽ‘‘’““”••––—˜˜šêŸ’š¡’š –'žµèðããäãááÈ^š›œ‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜èš•Œ˜œ›ŸŸ›•‘) ‚åíàääãü3ššæ›‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜Ý™•š›››”ŸŽ™& XK »‘®ããääM˜™ššæˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜©˜›šŽšŽ¡Žž L<%%“˜™™ššˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜Š˜šš™“ž  %V;ö "~––—˜™™šÛ¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÉþÊËËÝÌÍÍÎÏÐÐÑÒÒÓÓÔÔÕÕ¯¯°°±²²³´´µµ¶··¸¹¹ºº»ü¼½¾¿¿øÀÁÁÂÂÃÄÅÅëÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓÔ¯°°±²²³´´µµ¶··¸¹¹º»ü¼½½¿¿ãÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓìÔ­®¯¯°°±²²³´´µµ¶··¸¹¹ºú»¼¼½¾¿¿æÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÒӭﮯ¯°°±²²³´´µµ¶··¸¸÷¹ºº»¼¼½½¿¿ãÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÐÒÒíÓ¬­­®¯¯°°±²²³´´µµ¶··õ¸¹¹ºº»¼¼½½¿¿äÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÒÒí«¬­­®¯¯°°±²²³´´µµ¶··ù¸¹¹ºº»¼¼þ½¿¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉõÊËËÌÌÍÍÎÏÏÑÑÞÒ««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»»¼½½¿¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉöÊËÌÌÍÎÎÏÏÑÑÞª««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»¼¼½½¿¿òÀÁÁÂÂÃÃÄÅÆÆÇÇÉÉÊÃËÌÌÍÎÎÏÐÏ˪ª««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»¼¼½½¿¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÈÉÉÊüËÌÌÍÍìź©ªª««¬­­®¯¯°°±²²³´´ðµ¶¶··¸¸¹ºº»¼¼½½¿¿ôÀÁÁÂÂÃÄÄÅÅÆÈÈÉÓÊË̾ ¡˜¦¨©ªª««¬­­®¯¯°°±²²³²³´µ¶¶··¸¸¹ºº»¼¼½½¿¿ÖÀÁÁÂÂÃÄÄÅÅÆÇÈÈÉÉ““‰Q ¨¨©ªª««¬­­®¯¯°°±²²å³´µ¶¶··¸¸¹ºº»¼¼½¾¾¿¿ÀÁÁÂÂÃÄÄàÆÇ“Œj  §¨¨©ªª««¬­­®¯¯°°±²²³à´µ¶¶··¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÃÄÄ—iæ  ¦§¨¨©ªª««¬­­®®¯°°±²²ã³´µ¶¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂó…Üdlic¦¦§¨¨©ªª««¬­­®®¯°°±±²²³³´´¶¶··í¸¹ºº»¼¼½½¾¾½¿»ÁÂÁùc~t|§ÀÉÉ¦§¨¨©ªª««¬­­®®¯°°ã±²²³³´´¶¶··¸¸¹ºº»¼¼½¼µ±«°µ¾âl¡ÀøŷÆÉÈÄ¥¥¦¦§¨¨©©ª««¬­­®®¯°°±ò²³³´µ¶¶··¸¸¹º»»Ô¼´¯°«¬± h¢ÀÆÅ¿½Â¾ÉÁ¹Ê¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯Ã°±²²³³´µ¶¶··¸¸¹ºº»®­º¹¼¾? w½¾·ÂÅÀ¿½¿Å¸Å¿£¤¥¥¦¦§¨¨©©ª««¬­­®®Á¯°°±²²³³´´¶¶··¸¸¹º¹¨±»½¾``¨¹³½µ¹µ»´¾Â¼Æ¸££¤¤¥¦¦§¨¨©©ª««¬­­®®ç¯°°±²²³³´µ¶¶··¸¹¹°¯³¬µuÞM¬­­°·¼²¶Á²¼Â½¾½¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±²²³³´µµ¶¶·¸·¦§ª¯™T*œ¶­¾­¸¼º¸³À°±´µ¾¡¢££¤¤¥¦¦§¨¨©©ª««¬­­„®¯¯°±²²³³´µµ¶¶··¥©²¹( r¯±¿¼¶²À¼²³¼»¹³²¶¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯°°±²²³³´µµ¶·µ¨¶¸­@Fª®¹¿½¼­¿º¯³»¾¿¶À² ¡¡¢££¤¤¥¦¦§¨¨©©ª««ñ¬­­®®¯°°±±²³³´µµÒ£¥©ª€ ´±°«µ¾º±®¹¯´¸Â»¶¾±Ÿ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®Å¯°°±±²²³´´µµ£§­§ˆ ²¼º¶²¸»±¬¾­´µ¾µ¼º°ŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®þ¯°°É±²³³´µ£¥µµ¶d ®©¸¸³µ´·¯®«³¯¼º¿´¯žŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®Å¯°°±±²³³§¢²¶¶œ  £¨§§°¶·¯¯«­¸µ®¶º¼®¯žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««û­®®¯°°ö±²³¡¢³´¶›¼©³§§«¹©©«º¼««¬½Á®¯žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª©««¬­®®¯°°±±²¡¡³³°r —¥§§ß¨¶¬¨¯µ­««­¿¾±°œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨ý©ª««Á¬­®®¯°°±¯¯³ £— ¡©¥§¥ª¦§´¨ª«ªª«¯Ã²¬±œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««·¬­®®¯°°±± £°– 3¡¤¤¦¦¬¬§¦§¨¨©ªª²±«¬­›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨¨©ª« ª«­®®¯°°ŸŸòªš Š¥©­«©¶¦¦ù§¨¨©ªª««ä¬š›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««Á¬­®®¯ ž°¬¡š€¢ª¨¥ª©¤¥¥¦§§¨©ªœ~€šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨¨©ª««á­®Ÿ­­žŸ–w¢¢£§²¨£¤¥¥¦¦§{o<㙚š›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨¨©ª««ì¬ ¨­¨ž­¢“ $p¡¢¢¤§££ú¤¥¥}X™šÖ›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©ª««ª¢©®±®¡’  a¡¡ý¢¤££ý¤eј™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦ª§§¨©©ª« ¦¬¢¬®ªœ”U ¡¡¢û£ŠhÅ<<—˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©££§«¬«œ›œOŸ  ¡¡¢¢ƒ ÍV»½½‘’’““”••–——˜˜™šš›œœŸ ¡í¢£¤™“”• ¦š½ëþþýþÜÖ¬3=»¼½‘’’““”••–——˜˜™šš››œžŸŸ  ¡¡ï£¤˜“¡¦Ÿ•ŽÂêýýàßÁ±£—öóöÎ<âää¹nŽŽ‘’’““”••–——˜˜š›äœŽœŸŸ  ¡n7”‰y Òãäåýå5ã=ßãä¼1¨ŽŽ‘’’““”••––—˜˜š›åœžŸŸ”šk=¡’’ž Nàãäçýè=â>àæäÁ& ¤¬ŽŽ‘’’““”••––—˜˜š›ìœž’›’›¡“‘¦‘™ MßããüåìEãIíñêÅ,žŸŒŽŽ‘’’““”••––—˜˜š›íœ¡’›Ÿ  “ ¡‘‡ IÞããûæñc5 ¸êëçpœŸ‹ŒŽŽ‘’’““”••––——˜˜šš››œ™žŸŸ“” ¡‘œ†!CÞßäãäÝç“‘ÄáääÔv‰ž‹‹ŒŽŽ‘‘’““”••––—˜˜š›ÅŽšžŸ‘ž –”œ†!4!µääãäãêëããäãäãÆ„›Š‹‹ŒŽŽ‘‘’““”••––—˜˜šêŸ’š¡’š –'žµèðããäãááÈ^š›œ‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜èš•Œ˜œ›ŸŸ›•‘) ‚åíàääãü3ššæ›‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜Ý™•š›››”ŸŽ™& XK »‘®ããääM˜™ššæˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜©˜›šŽšŽ¡Žž L<%%“˜™™ššˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜Š˜šš™“ž  %V;ö "~––—˜™™šÛ¯°°±²²³´´µµ¶··¸¹¹ºº»¼¼½¾¾¿¿ÀÁÁÂÃÃÄÄÅÆÆÇÉþÊËËÝÌÍÍÎÏÐÐÑÒÒÓÓÔÔÕÕ¯¯°°±²²³´´µµ¶··¸¹¹ºº»ü¼½¾¿¿øÀÁÁÂÂÃÄÅÅëÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓÓÔ¯°°±²²³´´µµ¶··¸¹¹º»ü¼½½¿¿ãÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÑÒÒÓìÔ­®¯¯°°±²²³´´µµ¶··¸¹¹ºú»¼¼½¾¿¿æÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÐÐÒӭﮯ¯°°±²²³´´µµ¶··¸¸÷¹ºº»¼¼½½¿¿ãÀÁÁÂÃÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÐÒÒíÓ¬­­®¯¯°°±²²³´´µµ¶··õ¸¹¹ºº»¼¼½½¿¿äÀÁÁÂÂÃÄÄÅÆÆÇÇÈÉÉÊËËÌÌÍÎÎÏÏÐÒÒí«¬­­®¯¯°°±²²³´´µµ¶··ù¸¹¹ºº»¼¼þ½¿¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉõÊËËÌÌÍÍÎÏÏÑÑÞÒ««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»»¼½½¿¿òÀÁÁÂÂÃÄÄÅÆÆÇÇÉÉöÊËÌÌÍÎÎÏÏÑÑÞª««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»¼¼½½¿¿òÀÁÁÂÂÃÃÄÅÆÆÇÇÉÉÊÃËÌÌÍÎÎÏÐÏ˪ª««¬­­®¯¯°°±²²³´´µµ¶¶··¸¸¹ºº»¼¼½½¿¿ÀÀÁÁÂÂÃÄÄÅÆÆÇÈÉÉÊüËÌÌÍÍìź©ªª««¬­­®¯¯°°±²²³´´ðµ¶¶··¸¸¹ºº»¼¼½½¿¿ôÀÁÁÂÂÃÄÄÅÅÆÈÈÉÓÊË̾ ¡˜¦¨©ªª««¬­­®¯¯°°±²²³²³´µ¶¶··¸¸¹ºº»¼¼½½¿¿ÖÀÁÁÂÂÃÄÄÅÅÆÇÈÈÉÉ““‰Q ¨¨©ªª««¬­­®¯¯°°±²²å³´µ¶¶··¸¸¹ºº»¼¼½¾¾¿¿ÀÁÁÂÂÃÄÄàÆÇ“Œj  §¨¨©ªª««¬­­®¯¯°°±²²³à´µ¶¶··¸¸¹ºº»¼¼½½¾¿¿ÀÁÁÂÂÃÃÄÄ—iæ  ¦§¨¨©ªª««¬­­®®¯°°±²²ã³´µ¶¶··¸¸¹ºº»¼¼½½¾¿¿ÀÀÁÂÂó…Üdlic¦¦§¨¨©ªª««¬­­®®¯°°±±²²³³´´¶¶··í¸¹ºº»¼¼½½¾¾½¿»ÁÂÁùc~t|§ÀÉÉ¦§¨¨©ªª««¬­­®®¯°°ã±²²³³´´¶¶··¸¸¹ºº»¼¼½¼µ±«°µ¾âl¡ÀøŷÆÉÈÄ¥¥¦¦§¨¨©©ª««¬­­®®¯°°±ò²³³´µ¶¶··¸¸¹º»»Ô¼´¯°«¬± h¢ÀÆÅ¿½Â¾ÉÁ¹Ê¤¥¥¦¦§¨¨©©ª««¬­­®®¯¯Ã°±²²³³´µ¶¶··¸¸¹ºº»®­º¹¼¾? w½¾·ÂÅÀ¿½¿Å¸Å¿£¤¥¥¦¦§¨¨©©ª««¬­­®®Á¯°°±²²³³´´¶¶··¸¸¹º¹¨±»½¾``¨¹³½µ¹µ»´¾Â¼Æ¸££¤¤¥¦¦§¨¨©©ª««¬­­®®ç¯°°±²²³³´µ¶¶··¸¹¹°¯³¬µuÞM¬­­°·¼²¶Á²¼Â½¾½¢££¤¤¥¦¦§¨¨©©ª««¬­­®Ã¯°°±²²³³´µµ¶¶·¸·¦§ª¯™T*œ¶­¾­¸¼º¸³À°±´µ¾¡¢££¤¤¥¦¦§¨¨©©ª««¬­­„®¯¯°±²²³³´µµ¶¶··¥©²¹( r¯±¿¼¶²À¼²³¼»¹³²¶¡¡¢££¤¤¥¦¦§¨¨©©ª««¬¬­­®®¯°°±²²³³´µµ¶·µ¨¶¸­@Fª®¹¿½¼­¿º¯³»¾¿¶À² ¡¡¢££¤¤¥¦¦§¨¨©©ª««ñ¬­­®®¯°°±±²³³´µµÒ£¥©ª€ ´±°«µ¾º±®¹¯´¸Â»¶¾±Ÿ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®Å¯°°±±²²³´´µµ£§­§ˆ ²¼º¶²¸»±¬¾­´µ¾µ¼º°ŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®þ¯°°É±²³³´µ£¥µµ¶d ®©¸¸³µ´·¯®«³¯¼º¿´¯žŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««­®Å¯°°±±²³³§¢²¶¶œ  £¨§§°¶·¯¯«­¸µ®¶º¼®¯žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª««û­®®¯°°ö±²³¡¢³´¶›¼©³§§«¹©©«º¼««¬½Á®¯žžŸŸ ¡¡¢££¤¤¥¦¦§¨¨©©ª©««¬­®®¯°°±±²¡¡³³°r —¥§§ß¨¶¬¨¯µ­««­¿¾±°œžžŸŸ ¡¡¢££¤¤¥¦¦§¨¨ý©ª««Á¬­®®¯°°±¯¯³ £— ¡©¥§¥ª¦§´¨ª«ªª«¯Ã²¬±œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««·¬­®®¯°°±± £°– 3¡¤¤¦¦¬¬§¦§¨¨©ªª²±«¬­›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨¨©ª« ª«­®®¯°°ŸŸòªš Š¥©­«©¶¦¦ù§¨¨©ªª««ä¬š›œœžžŸŸ ¡¡¢££¤¤¥¦¦§§¨©©ª««Á¬­®®¯ ž°¬¡š€¢ª¨¥ª©¤¥¥¦§§¨©ªœ~€šš›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨¨©ª««á­®Ÿ­­žŸ–w¢¢£§²¨£¤¥¥¦¦§{o<㙚š›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨¨©ª««ì¬ ¨­¨ž­¢“ $p¡¢¢¤§££ú¤¥¥}X™šÖ›œœžžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©©ª««ª¢©®±®¡’  a¡¡ý¢¤££ý¤eј™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦ª§§¨©©ª« ¦¬¢¬®ªœ”U ¡¡¢û£ŠhÅ<<—˜™™šš›œœžŸŸ ¡¡¢¢£¤¤¥¦¦§§¨©££§«¬«œ›œOŸ  ¡¡¢¢ƒ ÍV»½½‘’’““”••–——˜˜™šš›œœŸ ¡í¢£¤™“”• ¦š½ëþþýþÜÖ¬3=»¼½‘’’““”••–——˜˜™šš››œžŸŸ  ¡¡ï£¤˜“¡¦Ÿ•ŽÂêýýàßÁ±£—öóöÎ<âää¹nŽŽ‘’’““”••–——˜˜š›äœŽœŸŸ  ¡n7”‰y Òãäåýå5ã=ßãä¼1¨ŽŽ‘’’““”••––—˜˜š›åœžŸŸ”šk=¡’’ž Nàãäçýè=â>àæäÁ& ¤¬ŽŽ‘’’““”••––—˜˜š›ìœž’›’›¡“‘¦‘™ MßããüåìEãIíñêÅ,žŸŒŽŽ‘’’““”••––—˜˜š›íœ¡’›Ÿ  “ ¡‘‡ IÞããûæñc5 ¸êëçpœŸ‹ŒŽŽ‘’’““”••––——˜˜šš››œ™žŸŸ“” ¡‘œ†!CÞßäãäÝç“‘ÄáääÔv‰ž‹‹ŒŽŽ‘‘’““”••––—˜˜š›ÅŽšžŸ‘ž –”œ†!4!µääãäãêëããäãäãÆ„›Š‹‹ŒŽŽ‘‘’““”••––—˜˜šêŸ’š¡’š –'žµèðããäãááÈ^š›œ‰Š‹‹ŒŽŽ‘‘’““”••––—˜˜èš•Œ˜œ›ŸŸ›•‘) ‚åíàääãü3ššæ›‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜Ý™•š›››”ŸŽ™& XK »‘®ããääM˜™ššæˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜©˜›šŽšŽ¡Žž L<%%“˜™™ššˆˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜Š˜šš™“ž  %V;ö "~––—˜™™š)þþýþþþýþþüýþþýýþûýþþýþ þùýþýþýþýýþþýýþýþýþøýþýþþýýþþýþýþýþýþýþþýþ þúýþþýþýýþþýýþýþþýýþýþþýþþþýþþýýþýýòþýþþýþþýýþýýþýýþþýýþþýþ þþýþþýúþýýþþýýþýþþýý$þüýþþýýþýþýþþýýþûýþþýþþñýþþýýþýýþþýüýþýýþþýýúþýýþýþþþýþþþýþþýýþýýþþýþþýþþýýþþýýþøýþþýþþýþþüýþþýýþúýþýýþýýþùýþþýþýþþýþþýþþþýþþüýþþýýüþýþý ýüþýþýýýþýþþþýþþýþýùþýýþýþýýþþýþþþýþþûýþþýþþýþýþþýýúþýþýýþþüýüýþþøýþýýþþýþþþýþþýùþýþýýþýýþþýþþýýþýý&þýþþýýþþýýþýþþýýþþýþþþýþþþýþþ ýþþýýýþýþþûýþþýþþüýþýþþþýþþþýþþýþþýýþþýýþýþýúþýþþýþ þýþýþþýýþþýýþüýþýþþþýþ þüýþþýýüþýýþþøýþþýþýýþþþýþþþýþþýþúýþþýþýýúþýþþýþþþýþþþýþþþýþþþýþþýþýûþýýþýýþþýýüþýýþþþýþþþýþþ ýþþýýûþýþþýýþøýþýþýþýþþþýþþýþýþþýýþþýþ þýþýþýþýüþýýþþûýþþýþþýþüýþþýýþþýýþýþþýþþýþýýþýýþýýþýýùþýþýþþýýþþýþ þþýþþýýþýýþþýýþþýýþýþþýþþþýþþþýþþýþþýýþýùþýýþýþýýþþýþþþýþþýþþýþþüýþýþþ ýüþýýþ#þýþþýýþþýýþýþþýþþùýþýþþýþþõýþþýýþýþýþýýþþýýüþýýþþùýþþýþýþþúýþþýþýýþýþþýýþüýþýþþýûþýþýþþøýþýýþýýþþûýþþýþþýúþýþýýþþýýþýþþþýþþ÷ýþýþýýþýþþýþøýþþýýþýþþþýþ þúýþýýþýýþýûþýþþýýúþýþþýþþþýþþöýþþýþþýþþýýþýýþýýþýýþýþþþýþþþýþþéýþþýýþþýýþþýýþþýýþýýþýþþüýþþýýüþýýþþýþþýýþýþþýýþýþüýþýþþþýþþýþý÷þýýþþýþýþþýúþýýþýþþýþþýý þýýþýýùþýþýýþýýþýþý þþýþþýþýûþýþýþþýüþýýþþýþþýþþþýþþüýþýþþýýþýþþý÷þýþþýþýýþþúýþýþýþ þýþñýþþýýþþýþýþýþþýýþþýþþýýþýýþøýþýýþýýþþýùþýýþþýþþþýþþüýþþýýþöýþþýþþýýþýýþþýþþ÷ýþýþþýþþýýþý þùýþýýþýþþýþþýýûþýþþýýþüýþýþþýþþýýþþýýþýþýûþýüýþþ÷ýþþýýþþýþþýþþýýþýþýþùýþýþþýþþýþýþýþþýýþýþþýþ þýþýþýþýýþýþþþýþþþýþþýþýþþýýþýþùýþýþþýþþóüþþýþþýýþþýýþþ ýþþýþþýþýþþýþþýþþýþþýüþýýþþýýþýþþþýþþýþýûþýþýþþþýþþúýþýýþýýþýþûýþýþýýþùýþþýþþýýþþýýþýýþýýþýþýþþýýþ ýþýþýýþýýþþýýóþýýþþýýþþýþþýýþþýýþüýþýþþþýþþýþþýýþýþýüþýýþþõýþþýþýþþýþýýþýüþýýþþýýþýþþýúþýýþþýýýþýþþýýþýýüþýþýýþþýþþýòþýýþþýýþþýýþýþþýþýþýþýþûýþýýþþúýþýýþýýþýþýûþýþþýýþþýýþýþþýýþýþþýýþýýþýýûþýýþýýþýüþýýþþúýþþýýþþýýþýýþþýþþýýþýýõþýþýýþþýýþýýþýýþýýþþý÷Ö××ØØÙÚÚÜÜÝöÞßßàááââãååæçÓèéêëëìííîïïððñòòóôôõõö÷÷øùùúúûüüýý÷ÕÕÖ×ØØÙÙÚÜÜÝÞ÷ßààááâãäååÐæçèèéêëëìííîîïððññòóôôõõö÷÷øùùúúûüüý÷ÔÕÖÖ×ØØÙÙÛÜÜÝÞ÷ßààáââãäååÐæçèèêêëëìííîîïïðññòóôôõõö÷÷øùùúúûüü÷ÔÔÕÕÖ×ØØÙÚÛÜÜÝÞ÷ßààáââãäååôæçèéêêëëìííîîðñâòóôôõõö÷÷øùùúúûü÷ÓÔÔÕÕÖ××ØÚÚÛÜÜÝÞÆßàáââãäååææçèéêêëëìííîîïïðñòòóôôõõö÷÷øøùúúû÷ÓÓÔÔÕÖÖ×ØÙÚÚÛÜÜ´ÛÚ×ÙÖÒÒÖáãäååææèèéêêëëìííîîïïðñòòóôôõõö÷÷øøùúú÷ÒÓÓÔÔÕÖÖ×ÙÙÚÚÛÜÜÚØÒÎÊÎÕÐÐÚàãååæçèèééêëëìííîîïïðñòòóôôõõö÷÷øøùú÷ÌÄËÓÔÔÕÖÖ×ÖÏÊËËÌÑÒÔØÞÞÚÔÓÌÜâãäååæççèééêëëìííîîïððñòòóóôõõö÷÷øøù÷ÂÂÈÐÓÔÔÕÕÒÌÇÄÅÈÐØÜÜÝ€¨ÛÙÎÍÞáâãäååæçèèéêêëëìííîîïððñòòóóôõõö÷÷øø÷ÃϽÆÓÓÔÓÒÀÁÕØÙÙÚÚÛÜÛÜÝÝÕÊÐÞáâããäåææçèèéêêëëìííîïïððñòòóóôõõö÷÷ø÷²³³²ºÂÒÑ¿ÉÔ××ØÙÙÚÔÖÛÜÜÛÒÈÑßàáâããäååæçèèéêêëëìííîîïððñòòóóôõõö÷÷ô µº¹ÂÑÕÖÖúÕÍÈÍÙÛÛ…ÚÎÉÑÞààáâãääåææçèèééêëëìííîîïððñòòóóôõõö÷÷ šÉÌÑÑÉÄÏÙÚØÚÛ×ÊÎÖÝßàááâãääåææçèèéêêëëìííîîïððñòòóóôõõö÷ U®Ç×ØØÙ€ÒÅÌ×ÜÞÞßàááããääåææçèèééêëëìííîîïððñòòóóôõõ÷^V[L?  ZÂÓØØÙÕÇÅÏÔÔÜÞßààáâããääååæçèèééêëëìííîîïððñòòóóôõ÷ÈÂý”JPLC m×ØÑÇÃÅÈÊÉÆÎÞßààáâããääæçÝèééêëëìííîîïððñòòóóô÷ɼ·»¸½Íзg5÷ŒÊÄÁÄÅÄÅŵÆÝßàááâããääååæçèèééêëëìííîîïððñòòóó÷·¾¹ÌƸ¸ÎÐлfO2šÀÉÊÃÃÉÕÙÔÆÇÈÜàááâããääæÃçèèééêëëìííîîïððñòòó÷·ÀºËºÇÃÀÌÀ»À®t" µÊÁÈÃÐÚÛÛÜÆÈÍÝàááâããääæçÅèééêëëìííîîïððñòò÷Á¶ÁĽ½Ã»Âľ¼¤h/ÂÖÆÂÎÙÚÛÛÜÜÝßààááâããääæÅçèèééêëëìííîîïððñò÷½·¿Á·½ÅºÁÍÌü»žd IÆÂÁÊØÙÚÜÛÝÒÛßßàááâããäæäçèèééêëëìííîîïððñ÷¸´¸Ãº¾ÄºÇÎÎáȺ»™[2ÈÀÁÆÐÕÚÛÅÅÇÈÜßßàááâããääæÅçèèééêëëìííîîïðð÷·´º¶´´µº··¼¹¹ºÎ½ŸF2xÀÀÂÇÎ×ÉÅÚÚÈÑÝßßàááâããäæÃçèèééêëëìííîîïð÷³À·º¼µ¸µ¶··¸¸¾¼»»•,3ÈÀÃÄÂÃÙÛÛÔÇÜÞßßàááâããääæÑçèèééêëëìííîîï÷µµÁ½¹¸´µµ¼¶·¿Á½º¼•’ÅÀÅÁÂÃÙÄÅÅ€ÏÆÇÝßßàááâããääåææçèèééêëëììíîî÷±·Ã·º¶´µ¸º¹ÀÊÍɾº¶€ —ÆÕÊÃÁÂÃ×ÚÅÏÛÆÆÞßßàááâããääåææçèèééêëëììíî÷±¶¼¶¹µ··µ·ÂÌÌÊʾÀ´€ HÃÒÏÊÁØÃÙÚÄÓÛÛÅÝÞÞßßàááâãääåææçèèééêëëììí÷¯°±²³´¿¹´´¹¶·¼¸¹ÂË©P.´ÂÍÀÁÁÂÅÖÅÚÚÙÇÜÝÞÞßßàááâãääæçïèééêëëìì÷º½²±¶³³´´Øµ·¸··¹À¼ : 0«ÂÀÊÁÑÁÂÂÊÙÙÒÌÜÛÜÞÞßßààáããääæçèèééêëëì÷¼»°°±²¶³·´º¶µ¶·¸¸ß›V 0]¸ÌÍÀÅÊÃÂÂÍÎÇÐÛØÖÛÝÞÞßßàâããääÁåæççèééêëë÷µ±¯¯°²²´´··´µµ¶··¸¸œ3 *³½ÃÂÂÀÀÑÆÁÃÓÙÚÎÒÜÜÝÞÞßàáâããääõåæççèééêë÷®®¯ú°±±²³´´µ·÷¸!+­¼¾¾ô¿ÁÔÑÁÂÕÙÙÚÚÜÜÞþßááåâããääææççèééê­¬­®®¯¯°±±²³³´´¤»·¶¸”*«¼Â̾¿ÏÎÀÂÃÌØÙÙÚÚÛÛÔËÞÞàááââããääææççèéé÷„‡ŠŽª¯¯°±±²²³´µ´µ¶·œ (¦¾Ò˽ÈÄÂÍÏÅÉÖØÙÙÚÚÜÜöÝÞßàááââãääøåæççèé÷Ðx‘¯°±±²³¸·´µµÅŽ%¦ÅÍÀ½½ÀÒÔÒÆÆÒ×ØÙÙÚÚÛÜÜÝßßàááýâãääæçýè÷ê‹’±±²³¶µ´·¹ÅŒ %°Ä»¼¼ñÂÒÔÓÍÂÓ××ØÙÙÚÚÜÜûÞßßàááõâããääææçç÷Ó™±±²²³µ·¹·Ž$§ÄºÁǼÆÐÓÓÊÅÕÖ××ØØÙÚÚÜÜÝÞßßàááýâãääæùç÷;:8Þ>‡¤±²²³·¶´” 1œÇÏË¿¼¿ÑÒÐÃËÕÕÖ××ØØÚóÛÝÝÞßßàááââãääæø÷ªª‡?90Ót¨±²²³³¸q#—ÉÍËÆ»ÇÒÒÊÂÒÔÕÕÖ×ÖÑÅÑÚÛÛÝÝÞßßàááýâãääüæ÷©ªªÇ§~; ,­¾±±²³²` ŽÉÍ;ºÊËÐÃÆÓÓÔÕÕÖ×ÖËÓÙÚÛÜÝÝÞßßàááââãääº÷¨©©ª««—_ 9€À½±²²³Q‰ÃÆúº»ÁÊÀÎÒÓÓÔÕÕÖ××ØÑÊÛÛÜÝÝÞßßàááââãää÷¨¨©ª««ÁŽT ?ÅÀ´±²­E%‚·Á¼ÄÄÀÄÀÃÐÒÒÓÓÔÕÕÖ××ØÙÚÛÛÜÝÝÞßßàááââãä÷§¨¨©ª««•ŒB„ƺ»²¨5}½ºÈÂɺ»ÂËÑÐÉËÓÓÔÕÕÖ××ØÚÚÛÛÜÝÝÞßßàááââã÷¦§¨©©ª«®gaÉÊż£( ‚¿¾É½Ç¸ÁÍÎÏÌÈÍÒÓÓÔÕÕÖ××ÙÚÚÛÛÝÑÞßßàááââ÷¦¦§¨©ª®µ¼”%OkiŒÁ{¾¼È½½¾ÊÍÏÏÐÑÒÒÓßÔÕÕÖ×ØÙÙÚÛÛÜÝÝÞßßààáá÷¥¦§¨©¯·¼b<è&Oyw z½»Ç·¹ÈÌÍÎÏÏÐÑÒÒÓŸÔÕÕÖØØÙÚÚÛÛÜÝÝÞßßààá÷¤¥§©¬°¹9SŸ ¢¥D z¶½ÄµÅËÌÌÍÎÏÏÐÑÑÐÐÓÓÔÕÖ×ØØÙÚÚÛÛÜÝÝÞßßàà÷©¨ª°¹Á84¾êþþïÚ¹¦W |´¼¼ÅÊËËüÌÍÎÏÏíÑÓÓÔÕ××ØØÙÚÚÛÛÜÝÝÞßßõ÷½¾¿¿À<0çþþïýç¯V {¶¸¸ÉÉÊËËøÌÍÍÏÏÐÑÒÒÓöÔÖ××ØØÙÚÚÛÛÝðÞßß÷½½¾¿£)êýþýþþýåþò·6 |¹³ÄÉɼÊÊËËÌÍÍÎÐÑÑÒÒôÓÔÕÖ××ØØÙÚÚÛÛÝÑÞß÷DD[¾FGýþþ€TSQNôýýûÞ·¸Èɺ»ÉÊÊËËÌÍÍÎÏÑÑÒÒôÔÕÕÖ××ØØÙÚÚÛÛÝòÞ÷}–.b6ðþþjî;DñýùÒ ˆ¹¹Á´´ÂÉÉçÊËËÌÍÍÎÏÐÑÒÒÓÔÕÕÖÖ×ØØÙÚÚÛÛÝô÷®’| /øþçUÓ4õþýúÔ*³·37:7OÃÇÉÊËËÌÍÎÎÏÐÑÒÒÓÔÕÕÖÖ××ØÙÙÚÛÛóÝ÷©¢C&õýêQÒ0øýýúÙ5 >T R{g;¾ÉÉÊËËÌÍÎÎÍÍÑÑÓÓÔÕÕÖÖ×ØØÙÚÚÛÛô÷«©ž‘' öþïPì*ùýþùÙ,–¯³ …7¿ÉÉñÊËÌÍÍÌÆ¿ËÑÑÓÓÔÕÕëÖ×ØØÙÙÚÛÛ÷  ¡š*õþôPì#ûþýöÙ(]kµ¹Åƺ§´¾ÉÉÂÊËÌÍÍÎÏÏÐÑÑÓÓÔÕÕÖÖ×ØØÙÙÚÛ÷Ÿ ¡Ÿ1'üúú<üýýþæÜ$•¼»ÄÃý²¿ÆÈÉÉöÊËÌÌÍÍÎÏÐÑÑÓþÔÕÕêÖ××ØÙÚÚ÷žŸŸ¡£%îþþýþþýý÷¶ÃÃø¸¶ÃÆÇÈÈÉÉöÊËËÌÍÍÎÏÐÑÑÓþÔÕÕíÖ×ØØÙÙ÷žŸ –(DÝôûþþýÞþý–S Ÿ¶ÁÀ²±ÃÅÆÇÇÈÈÉÉÊÊËËÌÍÎÏÐÐÑÑÓþÔÕÕÔÖ×ØØÙ÷žŸ 'lÁïüýþýßðA°±­®ÀÃÄÄÅÆÇÈÉÉÊËùÌÍÎÏÐÐÑÑÓÐÔÕÕÖÖ××Ø÷œžŸ …+'—·¼Á® –¸¹­²ÂÃÃÄÄÅÆÇÈÉÉÊËùÌÍÎÏÏÐÑÑÓþÔÕÕñÖ×Ø÷›œžŸ›x<å!–¶µ³±ÁÂÃÃÄÄÅÆÇÈÉÉÊ÷ËÌÍÎÎÏÐÐÑÑÓþÔÕÕÔÖ×÷››œžžŸ Ža0D—˜K –¹¼·¶ÁÁ¹¼ÄÄÅÆÆÈÉÉõÊËËÌÍÎÎÏÐÐÑÑÓÐÔÕÕÖÖ÷š››œžžŸ ‰4!“¤¤£j˜¼½­½ÀÁ¾¾ÂÃÃÄÅÆÆÇÉÉõÊËËÌÍÎÎÏÏÐÑÑÓþÔÕÕ¬÷Ö××ØØÙÚÚÜÜÝöÞßßàááââãååæçÓèéêëëìííîïïððñòòóôôõõö÷÷øùùúúûüüýý÷ÕÕÖ×ØØÙÙÚÜÜÝÞ÷ßààááâãäååÐæçèèéêëëìííîîïððññòóôôõõö÷÷øùùúúûüüý÷ÔÕÖÖ×ØØÙÙÛÜÜÝÞ÷ßààáââãäååÐæçèèêêëëìííîîïïðññòóôôõõö÷÷øùùúúûüü÷ÔÔÕÕÖ×ØØÙÚÛÜÜÝÞ÷ßààáââãäååôæçèéêêëëìííîîðñâòóôôõõö÷÷øùùúúûü÷ÓÔÔÕÕÖ××ØÚÚÛÜÜÝÞÆßàáââãäååææçèéêêëëìííîîïïðñòòóôôõõö÷÷øøùúúû÷ÓÓÔÔÕÖÖ×ØÙÚÚÛÜÜ´ÛÚ×ÙÖÒÒÖáãäååææèèéêêëëìííîîïïðñòòóôôõõö÷÷øøùúú÷ÒÓÓÔÔÕÖÖ×ÙÙÚÚÛÜÜÚØÒÎÊÎÕÐÐÚàãååæçèèééêëëìííîîïïðñòòóôôõõö÷÷øøùú÷ÌÄËÓÔÔÕÖÖ×ÖÏÊËËÌÑÒÔØÞÞÚÔÓÌÜâãäååæççèééêëëìííîîïððñòòóóôõõö÷÷øøù÷ÂÂÈÐÓÔÔÕÕÒÌÇÄÅÈÐØÜÜÝ€¨ÛÙÎÍÞáâãäååæçèèéêêëëìííîîïððñòòóóôõõö÷÷øø÷ÃϽÆÓÓÔÓÒÀÁÕØÙÙÚÚÛÜÛÜÝÝÕÊÐÞáâããäåææçèèéêêëëìííîïïððñòòóóôõõö÷÷ø÷²³³²ºÂÒÑ¿ÉÔ××ØÙÙÚÔÖÛÜÜÛÒÈÑßàáâããäååæçèèéêêëëìííîîïððñòòóóôõõö÷÷ô µº¹ÂÑÕÖÖúÕÍÈÍÙÛÛ…ÚÎÉÑÞààáâãääåææçèèééêëëìííîîïððñòòóóôõõö÷÷ šÉÌÑÑÉÄÏÙÚØÚÛ×ÊÎÖÝßàááâãääåææçèèéêêëëìííîîïððñòòóóôõõö÷ U®Ç×ØØÙ€ÒÅÌ×ÜÞÞßàááããääåææçèèééêëëìííîîïððñòòóóôõõ÷^V[L?  ZÂÓØØÙÕÇÅÏÔÔÜÞßààáâããääååæçèèééêëëìííîîïððñòòóóôõ÷ÈÂý”JPLC m×ØÑÇÃÅÈÊÉÆÎÞßààáâããääæçÝèééêëëìííîîïððñòòóóô÷ɼ·»¸½Íзg5÷ŒÊÄÁÄÅÄÅŵÆÝßàááâããääååæçèèééêëëìííîîïððñòòóó÷·¾¹ÌƸ¸ÎÐлfO2šÀÉÊÃÃÉÕÙÔÆÇÈÜàááâããääæÃçèèééêëëìííîîïððñòòó÷·ÀºËºÇÃÀÌÀ»À®t" µÊÁÈÃÐÚÛÛÜÆÈÍÝàááâããääæçÅèééêëëìííîîïððñòò÷Á¶ÁĽ½Ã»Âľ¼¤h/ÂÖÆÂÎÙÚÛÛÜÜÝßààááâããääæÅçèèééêëëìííîîïððñò÷½·¿Á·½ÅºÁÍÌü»žd IÆÂÁÊØÙÚÜÛÝÒÛßßàááâããäæäçèèééêëëìííîîïððñ÷¸´¸Ãº¾ÄºÇÎÎáȺ»™[2ÈÀÁÆÐÕÚÛÅÅÇÈÜßßàááâããääæÅçèèééêëëìííîîïðð÷·´º¶´´µº··¼¹¹ºÎ½ŸF2xÀÀÂÇÎ×ÉÅÚÚÈÑÝßßàááâããäæÃçèèééêëëìííîîïð÷³À·º¼µ¸µ¶··¸¸¾¼»»•,3ÈÀÃÄÂÃÙÛÛÔÇÜÞßßàááâããääæÑçèèééêëëìííîîï÷µµÁ½¹¸´µµ¼¶·¿Á½º¼•’ÅÀÅÁÂÃÙÄÅÅ€ÏÆÇÝßßàááâããääåææçèèééêëëììíîî÷±·Ã·º¶´µ¸º¹ÀÊÍɾº¶€ —ÆÕÊÃÁÂÃ×ÚÅÏÛÆÆÞßßàááâããääåææçèèééêëëììíî÷±¶¼¶¹µ··µ·ÂÌÌÊʾÀ´€ HÃÒÏÊÁØÃÙÚÄÓÛÛÅÝÞÞßßàááâãääåææçèèééêëëììí÷¯°±²³´¿¹´´¹¶·¼¸¹ÂË©P.´ÂÍÀÁÁÂÅÖÅÚÚÙÇÜÝÞÞßßàááâãääæçïèééêëëìì÷º½²±¶³³´´Øµ·¸··¹À¼ : 0«ÂÀÊÁÑÁÂÂÊÙÙÒÌÜÛÜÞÞßßààáããääæçèèééêëëì÷¼»°°±²¶³·´º¶µ¶·¸¸ß›V 0]¸ÌÍÀÅÊÃÂÂÍÎÇÐÛØÖÛÝÞÞßßàâããääÁåæççèééêëë÷µ±¯¯°²²´´··´µµ¶··¸¸œ3 *³½ÃÂÂÀÀÑÆÁÃÓÙÚÎÒÜÜÝÞÞßàáâããääõåæççèééêë÷®®¯ú°±±²³´´µ·÷¸!+­¼¾¾ô¿ÁÔÑÁÂÕÙÙÚÚÜÜÞþßááåâããääææççèééê­¬­®®¯¯°±±²³³´´¤»·¶¸”*«¼Â̾¿ÏÎÀÂÃÌØÙÙÚÚÛÛÔËÞÞàááââããääææççèéé÷„‡ŠŽª¯¯°±±²²³´µ´µ¶·œ (¦¾Ò˽ÈÄÂÍÏÅÉÖØÙÙÚÚÜÜöÝÞßàááââãääøåæççèé÷Ðx‘¯°±±²³¸·´µµÅŽ%¦ÅÍÀ½½ÀÒÔÒÆÆÒ×ØÙÙÚÚÛÜÜÝßßàááýâãääæçýè÷ê‹’±±²³¶µ´·¹ÅŒ %°Ä»¼¼ñÂÒÔÓÍÂÓ××ØÙÙÚÚÜÜûÞßßàááõâããääææçç÷Ó™±±²²³µ·¹·Ž$§ÄºÁǼÆÐÓÓÊÅÕÖ××ØØÙÚÚÜÜÝÞßßàááýâãääæùç÷;:8Þ>‡¤±²²³·¶´” 1œÇÏË¿¼¿ÑÒÐÃËÕÕÖ××ØØÚóÛÝÝÞßßàááââãääæø÷ªª‡?90Ót¨±²²³³¸q#—ÉÍËÆ»ÇÒÒÊÂÒÔÕÕÖ×ÖÑÅÑÚÛÛÝÝÞßßàááýâãääüæ÷©ªªÇ§~; ,­¾±±²³²` ŽÉÍ;ºÊËÐÃÆÓÓÔÕÕÖ×ÖËÓÙÚÛÜÝÝÞßßàááââãääº÷¨©©ª««—_ 9€À½±²²³Q‰ÃÆúº»ÁÊÀÎÒÓÓÔÕÕÖ××ØÑÊÛÛÜÝÝÞßßàááââãää÷¨¨©ª««ÁŽT ?ÅÀ´±²­E%‚·Á¼ÄÄÀÄÀÃÐÒÒÓÓÔÕÕÖ××ØÙÚÛÛÜÝÝÞßßàááââãä÷§¨¨©ª««•ŒB„ƺ»²¨5}½ºÈÂɺ»ÂËÑÐÉËÓÓÔÕÕÖ××ØÚÚÛÛÜÝÝÞßßàááââã÷¦§¨©©ª«®gaÉÊż£( ‚¿¾É½Ç¸ÁÍÎÏÌÈÍÒÓÓÔÕÕÖ××ÙÚÚÛÛÝÑÞßßàááââ÷¦¦§¨©ª®µ¼”%OkiŒÁ{¾¼È½½¾ÊÍÏÏÐÑÒÒÓßÔÕÕÖ×ØÙÙÚÛÛÜÝÝÞßßààáá÷¥¦§¨©¯·¼b<è&Oyw z½»Ç·¹ÈÌÍÎÏÏÐÑÒÒÓŸÔÕÕÖØØÙÚÚÛÛÜÝÝÞßßààá÷¤¥§©¬°¹9SŸ ¢¥D z¶½ÄµÅËÌÌÍÎÏÏÐÑÑÐÐÓÓÔÕÖ×ØØÙÚÚÛÛÜÝÝÞßßàà÷©¨ª°¹Á84¾êþþïÚ¹¦W |´¼¼ÅÊËËüÌÍÎÏÏíÑÓÓÔÕ××ØØÙÚÚÛÛÜÝÝÞßßõ÷½¾¿¿À<0çþþïýç¯V {¶¸¸ÉÉÊËËøÌÍÍÏÏÐÑÒÒÓöÔÖ××ØØÙÚÚÛÛÝðÞßß÷½½¾¿£)êýþýþþýåþò·6 |¹³ÄÉɼÊÊËËÌÍÍÎÐÑÑÒÒôÓÔÕÖ××ØØÙÚÚÛÛÝÑÞß÷DD[¾FGýþþ€TSQNôýýûÞ·¸Èɺ»ÉÊÊËËÌÍÍÎÏÑÑÒÒôÔÕÕÖ××ØØÙÚÚÛÛÝòÞ÷}–.b6ðþþjî;DñýùÒ ˆ¹¹Á´´ÂÉÉçÊËËÌÍÍÎÏÐÑÒÒÓÔÕÕÖÖ×ØØÙÚÚÛÛÝô÷®’| /øþçUÓ4õþýúÔ*³·37:7OÃÇÉÊËËÌÍÎÎÏÐÑÒÒÓÔÕÕÖÖ××ØÙÙÚÛÛóÝ÷©¢C&õýêQÒ0øýýúÙ5 >T R{g;¾ÉÉÊËËÌÍÎÎÍÍÑÑÓÓÔÕÕÖÖ×ØØÙÚÚÛÛô÷«©ž‘' öþïPì*ùýþùÙ,–¯³ …7¿ÉÉñÊËÌÍÍÌÆ¿ËÑÑÓÓÔÕÕëÖ×ØØÙÙÚÛÛ÷  ¡š*õþôPì#ûþýöÙ(]kµ¹Åƺ§´¾ÉÉÂÊËÌÍÍÎÏÏÐÑÑÓÓÔÕÕÖÖ×ØØÙÙÚÛ÷Ÿ ¡Ÿ1'üúú<üýýþæÜ$•¼»ÄÃý²¿ÆÈÉÉöÊËÌÌÍÍÎÏÐÑÑÓþÔÕÕêÖ××ØÙÚÚ÷žŸŸ¡£%îþþýþþýý÷¶ÃÃø¸¶ÃÆÇÈÈÉÉöÊËËÌÍÍÎÏÐÑÑÓþÔÕÕíÖ×ØØÙÙ÷žŸ –(DÝôûþþýÞþý–S Ÿ¶ÁÀ²±ÃÅÆÇÇÈÈÉÉÊÊËËÌÍÎÏÐÐÑÑÓþÔÕÕÔÖ×ØØÙ÷žŸ 'lÁïüýþýßðA°±­®ÀÃÄÄÅÆÇÈÉÉÊËùÌÍÎÏÐÐÑÑÓÐÔÕÕÖÖ××Ø÷œžŸ …+'—·¼Á® –¸¹­²ÂÃÃÄÄÅÆÇÈÉÉÊËùÌÍÎÏÏÐÑÑÓþÔÕÕñÖ×Ø÷›œžŸ›x<å!–¶µ³±ÁÂÃÃÄÄÅÆÇÈÉÉÊ÷ËÌÍÎÎÏÐÐÑÑÓþÔÕÕÔÖ×÷››œžžŸ Ža0D—˜K –¹¼·¶ÁÁ¹¼ÄÄÅÆÆÈÉÉõÊËËÌÍÎÎÏÐÐÑÑÓÐÔÕÕÖÖ÷š››œžžŸ ‰4!“¤¤£j˜¼½­½ÀÁ¾¾ÂÃÃÄÅÆÆÇÉÉõÊËËÌÍÎÎÏÏÐÑÑÓþÔÕÕ¬÷Ö××ØØÙÚÚÜÜÝöÞßßàááââãååæçÓèéêëëìííîïïððñòòóôôõõö÷÷øùùúúûüüýý÷ÕÕÖ×ØØÙÙÚÜÜÝÞ÷ßààááâãäååÐæçèèéêëëìííîîïððññòóôôõõö÷÷øùùúúûüüý÷ÔÕÖÖ×ØØÙÙÛÜÜÝÞ÷ßààáââãäååÐæçèèêêëëìííîîïïðññòóôôõõö÷÷øùùúúûüü÷ÔÔÕÕÖ×ØØÙÚÛÜÜÝÞ÷ßààáââãäååôæçèéêêëëìííîîðñâòóôôõõö÷÷øùùúúûü÷ÓÔÔÕÕÖ××ØÚÚÛÜÜÝÞÆßàáââãäååææçèéêêëëìííîîïïðñòòóôôõõö÷÷øøùúúû÷ÓÓÔÔÕÖÖ×ØÙÚÚÛÜÜ´ÛÚ×ÙÖÒÒÖáãäååææèèéêêëëìííîîïïðñòòóôôõõö÷÷øøùúú÷ÒÓÓÔÔÕÖÖ×ÙÙÚÚÛÜÜÚØÒÎÊÎÕÐÐÚàãååæçèèééêëëìííîîïïðñòòóôôõõö÷÷øøùú÷ÌÄËÓÔÔÕÖÖ×ÖÏÊËËÌÑÒÔØÞÞÚÔÓÌÜâãäååæççèééêëëìííîîïððñòòóóôõõö÷÷øøù÷ÂÂÈÐÓÔÔÕÕÒÌÇÄÅÈÐØÜÜÝ€¨ÛÙÎÍÞáâãäååæçèèéêêëëìííîîïððñòòóóôõõö÷÷øø÷ÃϽÆÓÓÔÓÒÀÁÕØÙÙÚÚÛÜÛÜÝÝÕÊÐÞáâããäåææçèèéêêëëìííîïïððñòòóóôõõö÷÷ø÷²³³²ºÂÒÑ¿ÉÔ××ØÙÙÚÔÖÛÜÜÛÒÈÑßàáâããäååæçèèéêêëëìííîîïððñòòóóôõõö÷÷ô µº¹ÂÑÕÖÖúÕÍÈÍÙÛÛ…ÚÎÉÑÞààáâãääåææçèèééêëëìííîîïððñòòóóôõõö÷÷ šÉÌÑÑÉÄÏÙÚØÚÛ×ÊÎÖÝßàááâãääåææçèèéêêëëìííîîïððñòòóóôõõö÷ U®Ç×ØØÙ€ÒÅÌ×ÜÞÞßàááããääåææçèèééêëëìííîîïððñòòóóôõõ÷^V[L?  ZÂÓØØÙÕÇÅÏÔÔÜÞßààáâããääååæçèèééêëëìííîîïððñòòóóôõ÷ÈÂý”JPLC m×ØÑÇÃÅÈÊÉÆÎÞßààáâããääæçÝèééêëëìííîîïððñòòóóô÷ɼ·»¸½Íзg5÷ŒÊÄÁÄÅÄÅŵÆÝßàááâããääååæçèèééêëëìííîîïððñòòóó÷·¾¹ÌƸ¸ÎÐлfO2šÀÉÊÃÃÉÕÙÔÆÇÈÜàááâããääæÃçèèééêëëìííîîïððñòòó÷·ÀºËºÇÃÀÌÀ»À®t" µÊÁÈÃÐÚÛÛÜÆÈÍÝàááâããääæçÅèééêëëìííîîïððñòò÷Á¶ÁĽ½Ã»Âľ¼¤h/ÂÖÆÂÎÙÚÛÛÜÜÝßààááâããääæÅçèèééêëëìííîîïððñò÷½·¿Á·½ÅºÁÍÌü»žd IÆÂÁÊØÙÚÜÛÝÒÛßßàááâããäæäçèèééêëëìííîîïððñ÷¸´¸Ãº¾ÄºÇÎÎáȺ»™[2ÈÀÁÆÐÕÚÛÅÅÇÈÜßßàááâããääæÅçèèééêëëìííîîïðð÷·´º¶´´µº··¼¹¹ºÎ½ŸF2xÀÀÂÇÎ×ÉÅÚÚÈÑÝßßàááâããäæÃçèèééêëëìííîîïð÷³À·º¼µ¸µ¶··¸¸¾¼»»•,3ÈÀÃÄÂÃÙÛÛÔÇÜÞßßàááâããääæÑçèèééêëëìííîîï÷µµÁ½¹¸´µµ¼¶·¿Á½º¼•’ÅÀÅÁÂÃÙÄÅÅ€ÏÆÇÝßßàááâããääåææçèèééêëëììíîî÷±·Ã·º¶´µ¸º¹ÀÊÍɾº¶€ —ÆÕÊÃÁÂÃ×ÚÅÏÛÆÆÞßßàááâããääåææçèèééêëëììíî÷±¶¼¶¹µ··µ·ÂÌÌÊʾÀ´€ HÃÒÏÊÁØÃÙÚÄÓÛÛÅÝÞÞßßàááâãääåææçèèééêëëììí÷¯°±²³´¿¹´´¹¶·¼¸¹ÂË©P.´ÂÍÀÁÁÂÅÖÅÚÚÙÇÜÝÞÞßßàááâãääæçïèééêëëìì÷º½²±¶³³´´Øµ·¸··¹À¼ : 0«ÂÀÊÁÑÁÂÂÊÙÙÒÌÜÛÜÞÞßßààáããääæçèèééêëëì÷¼»°°±²¶³·´º¶µ¶·¸¸ß›V 0]¸ÌÍÀÅÊÃÂÂÍÎÇÐÛØÖÛÝÞÞßßàâããääÁåæççèééêëë÷µ±¯¯°²²´´··´µµ¶··¸¸œ3 *³½ÃÂÂÀÀÑÆÁÃÓÙÚÎÒÜÜÝÞÞßàáâããääõåæççèééêë÷®®¯ú°±±²³´´µ·÷¸!+­¼¾¾ô¿ÁÔÑÁÂÕÙÙÚÚÜÜÞþßááåâããääææççèééê­¬­®®¯¯°±±²³³´´¤»·¶¸”*«¼Â̾¿ÏÎÀÂÃÌØÙÙÚÚÛÛÔËÞÞàááââããääææççèéé÷„‡ŠŽª¯¯°±±²²³´µ´µ¶·œ (¦¾Ò˽ÈÄÂÍÏÅÉÖØÙÙÚÚÜÜöÝÞßàááââãääøåæççèé÷Ðx‘¯°±±²³¸·´µµÅŽ%¦ÅÍÀ½½ÀÒÔÒÆÆÒ×ØÙÙÚÚÛÜÜÝßßàááýâãääæçýè÷ê‹’±±²³¶µ´·¹ÅŒ %°Ä»¼¼ñÂÒÔÓÍÂÓ××ØÙÙÚÚÜÜûÞßßàááõâããääææçç÷Ó™±±²²³µ·¹·Ž$§ÄºÁǼÆÐÓÓÊÅÕÖ××ØØÙÚÚÜÜÝÞßßàááýâãääæùç÷;:8Þ>‡¤±²²³·¶´” 1œÇÏË¿¼¿ÑÒÐÃËÕÕÖ××ØØÚóÛÝÝÞßßàááââãääæø÷ªª‡?90Ót¨±²²³³¸q#—ÉÍËÆ»ÇÒÒÊÂÒÔÕÕÖ×ÖÑÅÑÚÛÛÝÝÞßßàááýâãääüæ÷©ªªÇ§~; ,­¾±±²³²` ŽÉÍ;ºÊËÐÃÆÓÓÔÕÕÖ×ÖËÓÙÚÛÜÝÝÞßßàááââãääº÷¨©©ª««—_ 9€À½±²²³Q‰ÃÆúº»ÁÊÀÎÒÓÓÔÕÕÖ××ØÑÊÛÛÜÝÝÞßßàááââãää÷¨¨©ª««ÁŽT ?ÅÀ´±²­E%‚·Á¼ÄÄÀÄÀÃÐÒÒÓÓÔÕÕÖ××ØÙÚÛÛÜÝÝÞßßàááââãä÷§¨¨©ª««•ŒB„ƺ»²¨5}½ºÈÂɺ»ÂËÑÐÉËÓÓÔÕÕÖ××ØÚÚÛÛÜÝÝÞßßàááââã÷¦§¨©©ª«®gaÉÊż£( ‚¿¾É½Ç¸ÁÍÎÏÌÈÍÒÓÓÔÕÕÖ××ÙÚÚÛÛÝÑÞßßàááââ÷¦¦§¨©ª®µ¼”%OkiŒÁ{¾¼È½½¾ÊÍÏÏÐÑÒÒÓßÔÕÕÖ×ØÙÙÚÛÛÜÝÝÞßßààáá÷¥¦§¨©¯·¼b<è&Oyw z½»Ç·¹ÈÌÍÎÏÏÐÑÒÒÓŸÔÕÕÖØØÙÚÚÛÛÜÝÝÞßßààá÷¤¥§©¬°¹9SŸ ¢¥D z¶½ÄµÅËÌÌÍÎÏÏÐÑÑÐÐÓÓÔÕÖ×ØØÙÚÚÛÛÜÝÝÞßßàà÷©¨ª°¹Á84¾êþþïÚ¹¦W |´¼¼ÅÊËËüÌÍÎÏÏíÑÓÓÔÕ××ØØÙÚÚÛÛÜÝÝÞßßõ÷½¾¿¿À<0çþþïýç¯V {¶¸¸ÉÉÊËËøÌÍÍÏÏÐÑÒÒÓöÔÖ××ØØÙÚÚÛÛÝðÞßß÷½½¾¿£)êýþýþþýåþò·6 |¹³ÄÉɼÊÊËËÌÍÍÎÐÑÑÒÒôÓÔÕÖ××ØØÙÚÚÛÛÝÑÞß÷DD[¾FGýþþ€TSQNôýýûÞ·¸Èɺ»ÉÊÊËËÌÍÍÎÏÑÑÒÒôÔÕÕÖ××ØØÙÚÚÛÛÝòÞ÷}–.b6ðþþjî;DñýùÒ ˆ¹¹Á´´ÂÉÉçÊËËÌÍÍÎÏÐÑÒÒÓÔÕÕÖÖ×ØØÙÚÚÛÛÝô÷®’| /øþçUÓ4õþýúÔ*³·37:7OÃÇÉÊËËÌÍÎÎÏÐÑÒÒÓÔÕÕÖÖ××ØÙÙÚÛÛóÝ÷©¢C&õýêQÒ0øýýúÙ5 >T R{g;¾ÉÉÊËËÌÍÎÎÍÍÑÑÓÓÔÕÕÖÖ×ØØÙÚÚÛÛô÷«©ž‘' öþïPì*ùýþùÙ,–¯³ …7¿ÉÉñÊËÌÍÍÌÆ¿ËÑÑÓÓÔÕÕëÖ×ØØÙÙÚÛÛ÷  ¡š*õþôPì#ûþýöÙ(]kµ¹Åƺ§´¾ÉÉÂÊËÌÍÍÎÏÏÐÑÑÓÓÔÕÕÖÖ×ØØÙÙÚÛ÷Ÿ ¡Ÿ1'üúú<üýýþæÜ$•¼»ÄÃý²¿ÆÈÉÉöÊËÌÌÍÍÎÏÐÑÑÓþÔÕÕêÖ××ØÙÚÚ÷žŸŸ¡£%îþþýþþýý÷¶ÃÃø¸¶ÃÆÇÈÈÉÉöÊËËÌÍÍÎÏÐÑÑÓþÔÕÕíÖ×ØØÙÙ÷žŸ –(DÝôûþþýÞþý–S Ÿ¶ÁÀ²±ÃÅÆÇÇÈÈÉÉÊÊËËÌÍÎÏÐÐÑÑÓþÔÕÕÔÖ×ØØÙ÷žŸ 'lÁïüýþýßðA°±­®ÀÃÄÄÅÆÇÈÉÉÊËùÌÍÎÏÐÐÑÑÓÐÔÕÕÖÖ××Ø÷œžŸ …+'—·¼Á® –¸¹­²ÂÃÃÄÄÅÆÇÈÉÉÊËùÌÍÎÏÏÐÑÑÓþÔÕÕñÖ×Ø÷›œžŸ›x<å!–¶µ³±ÁÂÃÃÄÄÅÆÇÈÉÉÊ÷ËÌÍÎÎÏÐÐÑÑÓþÔÕÕÔÖ×÷››œžžŸ Ža0D—˜K –¹¼·¶ÁÁ¹¼ÄÄÅÆÆÈÉÉõÊËËÌÍÎÎÏÐÐÑÑÓÐÔÕÕÖÖ÷š››œžžŸ ‰4!“¤¤£j˜¼½­½ÀÁ¾¾ÂÃÃÄÅÆÆÇÉÉõÊËËÌÍÎÎÏÏÐÑÑÓþÔÕÕ¬÷þýþþýýþýþþýþýþþýþ"þþ÷ýýþúýþýýþýýöþýýþýþþýýþþýýþýþþýþû÷ýýþýýþýýþýýþþýýþþýýþþýþþýúþýýþþýýþþ÷ýýþþýýõþýþþýþýýþýþþ÷ýþýýþýþþýýþþýýþü÷þþýýþýþý÷þýþýýþþýþþýþúýþýþþýýþþýýþþ÷ýýþùýþýþýþýýþþýýþýþýþþýýüþýýþþü÷ýýþþþýþþýûþýýþýýþþýþþýþþýýþûýþýýþþþ÷ýý÷þýýþþýýþýýþýüþýþýýüþýüýýøüýþýþýýþþþ÷ýýþýýþýýþþýýþýþþýýþþýýþþýþþù÷ýþýþþýýøþýþýþýþýýþþýýþþýþþýùþýýþýþýýþñ÷ýýþýþýþýþýýþþýýþýþõýþþýþýþýþþýýýþýþþþ÷ýýþþýýûþýþþýýþüýþýþþýþýøþýýþýþþýýþû÷ýýþýýþýøþýþþýþýþþýûþýþþýýþýüþýýþþþ÷ýýþýúþýþýýþþýöþýýþþýýþþýýþùýþýþýýþþþ÷ýýùþýþýýþýýûþýþýþþýþýþýþþýýþþ÷ýýþýþþýýþýýþý ýþ÷÷þýýþýýþýýþýýþýýöþýþýþþýýþýýûþýþýþþ÷÷þýþýþýþýýþþýýþýþþýýþþýýþþýýþþ÷ýýþþýýþýþýþýþ ýþþ÷ýýþþýýüþýýþþýþýýþýþþýþþýýþýþþ÷ý ýýþýþþýøþýþþýþþýýþýüþýþýýþþýýþþ÷ý ýþýþýýþýýþþýýýþýþþõ÷ýýþþýýþýþýýûþýýþýýöþýþýýþþýýþþýþýþû÷ýýþýýþüýþþýýþýþýýþýýþýýþýþþþ÷ýýüþýþýýþþýýþþýýþýýþýýþþýýýþýþþþ÷ýýþýúþýýþþýýþöýþýýþýýþýþþýýþýýþø÷ýýþýýþýýüþýþýýþþýýüþýýþþýþýþþ÷ýýþüýýþýùþýýþþýþþôýþþýýþþýýþþýýþþýýþüýþ÷ý ýúþýþýýþþþýþþüýþþýýþþýýþþýýþþýþþþýþþü÷ýþýýõþýýþþýýþýýþþýýþýþþøýþþýþýþýý þþýþþöýþþý÷ýþýýþþýþýþüýþþýýþýþýþýþýýþýþþûýþþ÷ýýþóýþýþýþþýýþýýþþúýþþýþýýþþýþþöýþþýýþýþýþþ÷ýþýýþþ­ýþþùýþþýýþýýþþýþþýþýþþýþþýýþýþþý þùýþýýþ÷þþûýþýýþþýëþýþýýþþýýþþýþýýþýýþýþþý þüýþýþþú÷ýýþþýýþþýýþýþþýýüþýýþþüýþýþþýþþýþþþýþþúý÷þþýþþý÷þýýþýýþþýýþþýýúþýýþýþþýþýþþýþþþýþþþ÷þþýþýüþýþýýþýþþýýöþýýþýýþþýþþýþýþþ÷þþýþýýþýýüþýþýýþþýýþýþýþüýþýþþþýþþ÷ýþþý÷ýþþýýúþýþýýþþýþþýýþýþþýþþýþýþýþýúþ÷ýýþýýúþýýþþýýüþýþýýþþýýþýûþýþþýýûþýýþýýþþýþþþýþþþ÷ýýúþýýþýþþýþýþþýýþýþýþñýþýþýþýýþþ÷þþýþþûýþýþýýþýþüýýõþýþýýþýýþýþþýøþýþþýþýþþðýþþýþþ÷þþýþþýýþýýþýþþýýýþýþþ÷ýþýýþýþýþþýþôýþýþþýþþýþ÷þþýþþýýþýýüýþþýþýþýþùýþýýþýþþ÷ýþþ÷þýýþýýþþýþþýþþýýûþýýþýýþýýþýýþûýþýýþþøýþþýþþýþþúýþýý÷ý ýþýþ ýþýþþýþþþýþ þüýþýþþûýþ÷þýýþýûþýýþýýþüýþþýýþþýþþþýþþþýþþüýþýþþô÷ýþþýýþýýþýþþýþúýþþýýþþýöþýýþýþýýþýýþøýþþýþþýþþþ÷ýýþýþýûþýýþýýþþýýþþýýþþýýþýþýýþýþþýûþýþ÷ýýþúýþýþýþþýþþýýþýþþýþþýúþýþýýþ þ÷ýþþýþý÷þýýþýþýþþýýüþýýþþùýþýþýýþþýüþýýþþùýþýþþýþþþýþþüýþ÷ýýúþýýþþýýþþýýüþýýþþúýþþýýþþýþøýþýþþýýþþüýþýþþýþû÷ýþþýýþýþýþþýýþýïþýþýýþþýýþþýþýþýþþýýþýýøþýýþý÷þýýýþýþþþýþþýþýþýýþýýþýýþýþþýýþýýùþýýþý÷ýýüþýýþþúýþýýþýýóþýýþýþýüýýþýþþý÷þýþþýþýüýýþýýþýýùþýýþý÷ýýöþýþýþýýþþýýþýþýýþýþþýþþýýþýýþýýùþýýþý÷ýýþþýýóþýýþþýýþþýýþýýþýýþýýþýýþýýùþýýþý÷ýýõþýþýýþþýþþýýþýþýýþýýþýþüýþþýýþýýþýýùþýýþý÷ýýþýþýüþýþýýúþýýþþýýþûýþýýþþý þýýþýýôþýýþý÷þýýþþýýþýþþýýþþýýþþýýþþýþ þýýþýýùþýýþý÷þþýþþýýþþýýûþýýþýýþýþýþûýþþýþþýýþýý÷þýýþý÷þþýýþýþþý ýúþýýþýþþýþýþýýþýýñþýýþý÷ýþþýþþýýþþýûþýþþýýþý÷þýýþþýþþýýþþýþþýþýýþýýùþýýþý÷ýýþýþýþýþýüþýýþþýþýþýýþýýúþýýþý¬‡€œˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜Š‰˜™‹ŒšŽ‘† ]u•c Y””•––—˜™™†‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜Š‰‰Š‹šœŒ’˜… g‘Ÿ‘._“””•–——˜™††‡‡ˆ‰‰Š‹‹ŒŒŽŽŒ‘’““”••––—˜˜ÂŒŒ›œŠ l—‘- f’“””•–——˜…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜€Žœ‹Œ››Œ& q“+l’’“””•––—„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––—˜™˜ŠŠšš›‹% uŽŽŒ%s‘’’“”••–—„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––œ™——Š‹™š‹$"{ŽŽß}!x‘‘’’“”••–ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘à’““””•–’œ™—‰ŠŠ …Žt$€‘‘ç’“””••‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘þ’““ú”•›‰–——ì“’}'‚Œm7––‘‘ç’“””•‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽø‘‘’““””ˈ•——˜–Š€ #…“Œ‰b9¢¢’‘‘’’“””‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽÚ‘‘’““”“‡†–—˜”Ž…!ˆ˜†P:¦©¢›•‘’’é“‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽú‘’““‡Ì‘—•Š}$‰Œ‹€?.¦¨©ª«ª¥ž”’€‚‚ƒ„„…††‡‡ˆ‰‰|Š‹ŒŒŽŽú‘‘’““ô‹†‡‡‰} 'ŒŒØ‚0 8Ÿ¨©ªª«©£š•€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽÝ‘‘’’“””•–“Œ† +‘‰Ž‚"W§¨¨©ªª««ì¬€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠû‹ŒŒŽŽø‘‘’““””苇 1’‰‰pn¦§¨¨¤ž§««ô~€‚‚ƒ„„……‡þˆ‰‰Šû‹ŒŒŽŽÐ‘‘’““”’ˆ„ 8•‹Žr|¥¦§£™ ¨««}~€‚‚ƒ„„……‡þˆ‰‰Šû‹ŒŒŽŽú‘‘’““؃ 9‘’q|¥¦¥¡•Ÿ›•¢ª}}~€‚‚ƒ„„……‡ˆ‰Š÷‹ŒŒŽŽ’Ö“‘  =ˆ‹–j€¤£ž’¡¥Ÿ‘|}}~€€‚‚ƒ„„……‡öˆ‰‰ŠŠ‹ŒŒŽŽàŒŽ‘‘““‹=ŠŠ‹nŠ£•¢¦¢š˜˜||õ}~€€‚‚ƒ„„…û‡†‡ˆ‰‰çŠ‹ŒŒŽŽ‘“’Ž >“‰ná…‹–£¦§¨¨©©{{|}}~€€‚‚ƒ„„……††ó‡ˆˆ‰‰Š‹‹ŒŽÒ’‘HŠ”ˆuˆ‰Šž¥¦¦§¨¨©z{{|}}~€€‚‚ƒ„„……†‡âˆ‰‰ŠŠ‹ŒŒŽŠŒ†Q‡“‰u  ‰‰õŠ“¥¦¦§¨¨zz{{}Ñ~€€‚‚ƒƒ„…„…††‡‡ˆˆ‰ŠŠ‹ŒŒ‹‰‹‹Š„ W…†…X .‰‰ôŠ‹–Ÿ¢¥¦¡yzz{{}ö~€€‚‚ƒ„„Þ…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŒŠ{# \†Ž{B  Pˆ‰‰Šù‹Œxyzz{}Ñ~€€‚‚ƒ„ƒ„„…„…‡‡ˆ‰‰ŠŠ‹ŒŒŽŽŒz^†Žw1^ˆˆ‰‰Š‹øŒxxyzz{{}Ñ~€€‚‚ƒ‚ƒ„„…††‡‡ˆˆ‰ŠŠ‹ŒŒŽ‡w# _‹Šw(j‡ˆˆ‰‰Šö‹ŒŒwxxyzz{{}ø~€€‚‚σ„„…††‡‡ˆˆ‰ŠŠ‹ŒŒ‹Œ|" c‡‚#tŒ‡ˆˆ‹‰‰ŠŠ‹Œvwxxyzz{}ï~€s‚‚‚ƒ„„…††‡‡Öˆ‰ŠŠ‹ŒŽx$jˆ‰+ ‡’†‡ˆˆ‰ŠŠ‹vvwxxyzz{{}ò~€€€‚‚ƒƒ„††‡ˆæ‰ŠŠ‹ŒŒy,^‰Žt †ˆ†‡ˆˆ‰‰Šîuvvwxxyyzz{{}}~€€ù‚‚ƒƒ„††‡ˆæ‰ŠŠ‹Œw0h…l&‹‡‡ˆˆ‰‰Šuvùwxxyzz{{}ò~€€€‚‚ƒƒ„††Óƒ„ˆˆ‰Š‹Œw2#pg 'ˆ‹‡†‡‹”‰‹ŒŠ“tuuvvwxxyzz{{Á|}~~€€‚‚ƒƒ…†„ƒ†‡ˆˆ‰Š‹x6'tn &‰……††‰ˆ‰‰ŠŒstuuvvwxxyzz{{}~ô}~€€‚‚ƒƒ…††‡ˆŠÛy:'w{ &’Šˆ††’”’›sstuuvvwxxyzz{}ò~}~~€€‚‚ƒƒ…††‡×ˆ‰Šz?'wŽŒAˆ†ˆ’“‹™–˜rsstuuvvwxxyzz{þ|}}~ö€€‚‚ƒƒ…††‡ßˆ‰{S9Ž}a‹ŠŽŒ…‡š—š‘Šqqsstuuøvwwxyyz{{Ñ}|}}~~€€‚‚ƒ„……††‡ˆˆ‰|AlŒo!p‘‘Ž‘•›™’•‰qqsòtuuvvwxxyyz{{||}~ö€€‚‚ƒ„…††Ó‡ˆˆ}KlŒŒcu‘’ŽŒš›š˜Š‘ppqqsstuuvvwwxyyz{{|}Ø~€€‚‚ƒ„…††‡‡ˆˆ‰Š‹‹ŒŠ\x‹•š››šš›˜ppqsÃtuuvvwxxyyz{z{||}}~~€€‚‚ƒ„……†‡‡ˆ‰ŠŠ‹‹ˆ_$  ‚•™šš››œœ›oppqqstÎuvvwxxyyzyz{||}}~~€€‚‚ƒ„„††‡‡ˆ‰Š…{0 #“•˜™™š››œûnoppqqstùuvvwxxyyýz{||ø}~~€€‚‚ý„…††ä‡ŒŽ<8:–—˜˜™™š››œ›nnoppqqstuövwxxyxxyz||}~û€€‚‚󅆆„‚‰Ž‘’“Ž8ú?•——˜™™õš››œmnnoopqqstûuvvwxxyþz||}~䀀‚ƒ„ƒƒˆŽ‘’…† 2l“”—˜™™õ•“šlmnnoopqqsótuvvwxwwxxyz||Ô}~~€€‚ƒƒ~yˆŽ‘’{ W––—–˜—Œ’”llmnnoopqqstôuvvwvwxxyy{||}~×€€~}€‡ŒŽŽ‡d TŽ–‹•—‘”Žkllmnnoopqqúrsttuvvwxyþ{||Ó}}~†|sv„ŒŒŽŽŽŒ‡`Z\’Š—–‰ˆ‹jkllmnnoopqqstùuvuvvwxxïy{|}|uttqrsxƒ†ŠŒŽŽã†~_LG‹—••jjkklmnnoopqqstuvwÌxyy{vroopqrtt{ƒ‡‹‡‰…~v`>(R–——ŒŒŽijjkllmnnoopqqstuøvwwxzysoopÖrty‚‚v€ƒxz~…‚†wU#5;A‘ˆˆƒiijjkllmnnoopqqsòtsttuvvwwy{vnoopÕvzz|y~xx}……ƒ~|rU 6?>4lhhijjkllmnnoopqqst÷uvvwwxxnooÓqsqvvwwtv}‡|z~„~gK  8ghhiijkklmnnoopqqðsrssttuvvwyynstooÒrqrsstw}yz{}€|z{jO@+  gghhijjkllmnnoopqqrrstÜuvvwtsyvtwoopqqrstuwvw|zxz†‡ƒr]NH í fgghhijjkllmmnoopqqrstÂuvvwwxxywwroqqrststz€|{…†‡†…ˆ‰†jRSTS(efgghhijjkllmnnoopqpqrrssötuvvwwxyyxxtýuyþ„……݆‡‡ˆˆ‰‰Š‹Œ|ceefgghhijjkllmnnoopopqrrs÷tuvvwwxyzzíywruy~€‚ƒ„„……†‡‡ˆˆé‰‹‹Œdeefgghhijjkllmmnoopþqrråsttuvvwwxyz{{yz}~€€‚ƒ„„……À†‡‡ˆˆŠ‹‹Œddeefgghhijjkllmmnonoppqrrssttuvvwxxyz{{||}~€‚ƒƒ„„……†è‡ˆ‰Š‹cddeefgghhijjkkllmnnÝoppqrrsstuuvvwxxyz{{||~~€‚ƒƒ„„……ð†‡‡‰‰Šbcddeefgghhjükllmmnoïpqrrsstuuvvwxyyz{{ò|~~€‚ƒƒ„„……ð†‡ˆ‰‰bbcddeefgghhjÕkllmlmnnoppqrrssttuvvwxyyzz{{}~~€‚ƒƒ„„……ð†‡ˆ‰abbcddeefgghhjåkllklmnnoppqrrsstuuvvwxyyz{{ö}~~€‚ƒƒþ„……ð‡ˆˆ`abbccdeefgghhjåklkllmnnoppqrrsstuuvwwxyyz{{ò}~~€‚ƒƒ„„……‡`ôabbccdeefgghhjklùmnoopqrr¡sttuuvwwxyyz{{|}~~€‚ƒƒ„„……†‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡€œˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜Š‰˜™‹ŒšŽ‘† ]u•c Y””•––—˜™™†‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜Š‰‰Š‹šœŒ’˜… g‘Ÿ‘._“””•–——˜™††‡‡ˆ‰‰Š‹‹ŒŒŽŽŒ‘’““”••––—˜˜ÂŒŒ›œŠ l—‘- f’“””•–——˜…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜€Žœ‹Œ››Œ& q“+l’’“””•––—„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––—˜™˜ŠŠšš›‹% uŽŽŒ%s‘’’“”••–—„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––œ™——Š‹™š‹$"{ŽŽß}!x‘‘’’“”••–ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘à’““””•–’œ™—‰ŠŠ …Žt$€‘‘ç’“””••‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘þ’““ú”•›‰–——ì“’}'‚Œm7––‘‘ç’“””•‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽø‘‘’““””ˈ•——˜–Š€ #…“Œ‰b9¢¢’‘‘’’“””‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽÚ‘‘’““”“‡†–—˜”Ž…!ˆ˜†P:¦©¢›•‘’’é“‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽú‘’““‡Ì‘—•Š}$‰Œ‹€?.¦¨©ª«ª¥ž”’€‚‚ƒ„„…††‡‡ˆ‰‰|Š‹ŒŒŽŽú‘‘’““ô‹†‡‡‰} 'ŒŒØ‚0 8Ÿ¨©ªª«©£š•€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽÝ‘‘’’“””•–“Œ† +‘‰Ž‚"W§¨¨©ªª««ì¬€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠû‹ŒŒŽŽø‘‘’““””苇 1’‰‰pn¦§¨¨¤ž§««ô~€‚‚ƒ„„……‡þˆ‰‰Šû‹ŒŒŽŽÐ‘‘’““”’ˆ„ 8•‹Žr|¥¦§£™ ¨««}~€‚‚ƒ„„……‡þˆ‰‰Šû‹ŒŒŽŽú‘‘’““؃ 9‘’q|¥¦¥¡•Ÿ›•¢ª}}~€‚‚ƒ„„……‡ˆ‰Š÷‹ŒŒŽŽ’Ö“‘  =ˆ‹–j€¤£ž’¡¥Ÿ‘|}}~€€‚‚ƒ„„……‡öˆ‰‰ŠŠ‹ŒŒŽŽàŒŽ‘‘““‹=ŠŠ‹nŠ£•¢¦¢š˜˜||õ}~€€‚‚ƒ„„…û‡†‡ˆ‰‰çŠ‹ŒŒŽŽ‘“’Ž >“‰ná…‹–£¦§¨¨©©{{|}}~€€‚‚ƒ„„……††ó‡ˆˆ‰‰Š‹‹ŒŽÒ’‘HŠ”ˆuˆ‰Šž¥¦¦§¨¨©z{{|}}~€€‚‚ƒ„„……†‡âˆ‰‰ŠŠ‹ŒŒŽŠŒ†Q‡“‰u  ‰‰õŠ“¥¦¦§¨¨zz{{}Ñ~€€‚‚ƒƒ„…„…††‡‡ˆˆ‰ŠŠ‹ŒŒ‹‰‹‹Š„ W…†…X .‰‰ôŠ‹–Ÿ¢¥¦¡yzz{{}ö~€€‚‚ƒ„„Þ…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŒŠ{# \†Ž{B  Pˆ‰‰Šù‹Œxyzz{}Ñ~€€‚‚ƒ„ƒ„„…„…‡‡ˆ‰‰ŠŠ‹ŒŒŽŽŒz^†Žw1^ˆˆ‰‰Š‹øŒxxyzz{{}Ñ~€€‚‚ƒ‚ƒ„„…††‡‡ˆˆ‰ŠŠ‹ŒŒŽ‡w# _‹Šw(j‡ˆˆ‰‰Šö‹ŒŒwxxyzz{{}ø~€€‚‚σ„„…††‡‡ˆˆ‰ŠŠ‹ŒŒ‹Œ|" c‡‚#tŒ‡ˆˆ‹‰‰ŠŠ‹Œvwxxyzz{}ï~€s‚‚‚ƒ„„…††‡‡Öˆ‰ŠŠ‹ŒŽx$jˆ‰+ ‡’†‡ˆˆ‰ŠŠ‹vvwxxyzz{{}ò~€€€‚‚ƒƒ„††‡ˆæ‰ŠŠ‹ŒŒy,^‰Žt †ˆ†‡ˆˆ‰‰Šîuvvwxxyyzz{{}}~€€ù‚‚ƒƒ„††‡ˆæ‰ŠŠ‹Œw0h…l&‹‡‡ˆˆ‰‰Šuvùwxxyzz{{}ò~€€€‚‚ƒƒ„††Óƒ„ˆˆ‰Š‹Œw2#pg 'ˆ‹‡†‡‹”‰‹ŒŠ“tuuvvwxxyzz{{Á|}~~€€‚‚ƒƒ…†„ƒ†‡ˆˆ‰Š‹x6'tn &‰……††‰ˆ‰‰ŠŒstuuvvwxxyzz{{}~ô}~€€‚‚ƒƒ…††‡ˆŠÛy:'w{ &’Šˆ††’”’›sstuuvvwxxyzz{}ò~}~~€€‚‚ƒƒ…††‡×ˆ‰Šz?'wŽŒAˆ†ˆ’“‹™–˜rsstuuvvwxxyzz{þ|}}~ö€€‚‚ƒƒ…††‡ßˆ‰{S9Ž}a‹ŠŽŒ…‡š—š‘Šqqsstuuøvwwxyyz{{Ñ}|}}~~€€‚‚ƒ„……††‡ˆˆ‰|AlŒo!p‘‘Ž‘•›™’•‰qqsòtuuvvwxxyyz{{||}~ö€€‚‚ƒ„…††Ó‡ˆˆ}KlŒŒcu‘’ŽŒš›š˜Š‘ppqqsstuuvvwwxyyz{{|}Ø~€€‚‚ƒ„…††‡‡ˆˆ‰Š‹‹ŒŠ\x‹•š››šš›˜ppqsÃtuuvvwxxyyz{z{||}}~~€€‚‚ƒ„……†‡‡ˆ‰ŠŠ‹‹ˆ_$  ‚•™šš››œœ›oppqqstÎuvvwxxyyzyz{||}}~~€€‚‚ƒ„„††‡‡ˆ‰Š…{0 #“•˜™™š››œûnoppqqstùuvvwxxyyýz{||ø}~~€€‚‚ý„…††ä‡ŒŽ<8:–—˜˜™™š››œ›nnoppqqstuövwxxyxxyz||}~û€€‚‚󅆆„‚‰Ž‘’“Ž8ú?•——˜™™õš››œmnnoopqqstûuvvwxxyþz||}~䀀‚ƒ„ƒƒˆŽ‘’…† 2l“”—˜™™õ•“šlmnnoopqqsótuvvwxwwxxyz||Ô}~~€€‚ƒƒ~yˆŽ‘’{ W––—–˜—Œ’”llmnnoopqqstôuvvwvwxxyy{||}~×€€~}€‡ŒŽŽ‡d TŽ–‹•—‘”Žkllmnnoopqqúrsttuvvwxyþ{||Ó}}~†|sv„ŒŒŽŽŽŒ‡`Z\’Š—–‰ˆ‹jkllmnnoopqqstùuvuvvwxxïy{|}|uttqrsxƒ†ŠŒŽŽã†~_LG‹—••jjkklmnnoopqqstuvwÌxyy{vroopqrtt{ƒ‡‹‡‰…~v`>(R–——ŒŒŽijjkllmnnoopqqstuøvwwxzysoopÖrty‚‚v€ƒxz~…‚†wU#5;A‘ˆˆƒiijjkllmnnoopqqsòtsttuvvwwy{vnoopÕvzz|y~xx}……ƒ~|rU 6?>4lhhijjkllmnnoopqqst÷uvvwwxxnooÓqsqvvwwtv}‡|z~„~gK  8ghhiijkklmnnoopqqðsrssttuvvwyynstooÒrqrsstw}yz{}€|z{jO@+  gghhijjkllmnnoopqqrrstÜuvvwtsyvtwoopqqrstuwvw|zxz†‡ƒr]NH í fgghhijjkllmmnoopqqrstÂuvvwwxxywwroqqrststz€|{…†‡†…ˆ‰†jRSTS(efgghhijjkllmnnoopqpqrrssötuvvwwxyyxxtýuyþ„……݆‡‡ˆˆ‰‰Š‹Œ|ceefgghhijjkllmnnoopopqrrs÷tuvvwwxyzzíywruy~€‚ƒ„„……†‡‡ˆˆé‰‹‹Œdeefgghhijjkllmmnoopþqrråsttuvvwwxyz{{yz}~€€‚ƒ„„……À†‡‡ˆˆŠ‹‹Œddeefgghhijjkllmmnonoppqrrssttuvvwxxyz{{||}~€‚ƒƒ„„……†è‡ˆ‰Š‹cddeefgghhijjkkllmnnÝoppqrrsstuuvvwxxyz{{||~~€‚ƒƒ„„……ð†‡‡‰‰Šbcddeefgghhjükllmmnoïpqrrsstuuvvwxyyz{{ò|~~€‚ƒƒ„„……ð†‡ˆ‰‰bbcddeefgghhjÕkllmlmnnoppqrrssttuvvwxyyzz{{}~~€‚ƒƒ„„……ð†‡ˆ‰abbcddeefgghhjåkllklmnnoppqrrsstuuvvwxyyz{{ö}~~€‚ƒƒþ„……ð‡ˆˆ`abbccdeefgghhjåklkllmnnoppqrrsstuuvwwxyyz{{ò}~~€‚ƒƒ„„……‡`ôabbccdeefgghhjklùmnoopqrr¡sttuuvwwxyyz{{|}~~€‚ƒƒ„„……†‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††‡€œˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜Š‰˜™‹ŒšŽ‘† ]u•c Y””•––—˜™™†‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜Š‰‰Š‹šœŒ’˜… g‘Ÿ‘._“””•–——˜™††‡‡ˆ‰‰Š‹‹ŒŒŽŽŒ‘’““”••––—˜˜ÂŒŒ›œŠ l—‘- f’“””•–——˜…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜€Žœ‹Œ››Œ& q“+l’’“””•––—„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––—˜™˜ŠŠšš›‹% uŽŽŒ%s‘’’“”••–—„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““””•––œ™——Š‹™š‹$"{ŽŽß}!x‘‘’’“”••–ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘à’““””•–’œ™—‰ŠŠ …Žt$€‘‘ç’“””••‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘þ’““ú”•›‰–——ì“’}'‚Œm7––‘‘ç’“””•‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽø‘‘’““””ˈ•——˜–Š€ #…“Œ‰b9¢¢’‘‘’’“””‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽÚ‘‘’““”“‡†–—˜”Ž…!ˆ˜†P:¦©¢›•‘’’é“‚‚ƒ„„…††‡‡ˆ‰‰Š‹‹ŒŒŽŽú‘’““‡Ì‘—•Š}$‰Œ‹€?.¦¨©ª«ª¥ž”’€‚‚ƒ„„…††‡‡ˆ‰‰|Š‹ŒŒŽŽú‘‘’““ô‹†‡‡‰} 'ŒŒØ‚0 8Ÿ¨©ªª«©£š•€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŽÝ‘‘’’“””•–“Œ† +‘‰Ž‚"W§¨¨©ªª««ì¬€‚‚ƒ„„…††‡‡ˆ‰‰ŠŠû‹ŒŒŽŽø‘‘’““””苇 1’‰‰pn¦§¨¨¤ž§««ô~€‚‚ƒ„„……‡þˆ‰‰Šû‹ŒŒŽŽÐ‘‘’““”’ˆ„ 8•‹Žr|¥¦§£™ ¨««}~€‚‚ƒ„„……‡þˆ‰‰Šû‹ŒŒŽŽú‘‘’““؃ 9‘’q|¥¦¥¡•Ÿ›•¢ª}}~€‚‚ƒ„„……‡ˆ‰Š÷‹ŒŒŽŽ’Ö“‘  =ˆ‹–j€¤£ž’¡¥Ÿ‘|}}~€€‚‚ƒ„„……‡öˆ‰‰ŠŠ‹ŒŒŽŽàŒŽ‘‘““‹=ŠŠ‹nŠ£•¢¦¢š˜˜||õ}~€€‚‚ƒ„„…û‡†‡ˆ‰‰çŠ‹ŒŒŽŽ‘“’Ž >“‰ná…‹–£¦§¨¨©©{{|}}~€€‚‚ƒ„„……††ó‡ˆˆ‰‰Š‹‹ŒŽÒ’‘HŠ”ˆuˆ‰Šž¥¦¦§¨¨©z{{|}}~€€‚‚ƒ„„……†‡âˆ‰‰ŠŠ‹ŒŒŽŠŒ†Q‡“‰u  ‰‰õŠ“¥¦¦§¨¨zz{{}Ñ~€€‚‚ƒƒ„…„…††‡‡ˆˆ‰ŠŠ‹ŒŒ‹‰‹‹Š„ W…†…X .‰‰ôŠ‹–Ÿ¢¥¦¡yzz{{}ö~€€‚‚ƒ„„Þ…††‡‡ˆ‰‰ŠŠ‹ŒŒŽŒŠ{# \†Ž{B  Pˆ‰‰Šù‹Œxyzz{}Ñ~€€‚‚ƒ„ƒ„„…„…‡‡ˆ‰‰ŠŠ‹ŒŒŽŽŒz^†Žw1^ˆˆ‰‰Š‹øŒxxyzz{{}Ñ~€€‚‚ƒ‚ƒ„„…††‡‡ˆˆ‰ŠŠ‹ŒŒŽ‡w# _‹Šw(j‡ˆˆ‰‰Šö‹ŒŒwxxyzz{{}ø~€€‚‚σ„„…††‡‡ˆˆ‰ŠŠ‹ŒŒ‹Œ|" c‡‚#tŒ‡ˆˆ‹‰‰ŠŠ‹Œvwxxyzz{}ï~€s‚‚‚ƒ„„…††‡‡Öˆ‰ŠŠ‹ŒŽx$jˆ‰+ ‡’†‡ˆˆ‰ŠŠ‹vvwxxyzz{{}ò~€€€‚‚ƒƒ„††‡ˆæ‰ŠŠ‹ŒŒy,^‰Žt †ˆ†‡ˆˆ‰‰Šîuvvwxxyyzz{{}}~€€ù‚‚ƒƒ„††‡ˆæ‰ŠŠ‹Œw0h…l&‹‡‡ˆˆ‰‰Šuvùwxxyzz{{}ò~€€€‚‚ƒƒ„††Óƒ„ˆˆ‰Š‹Œw2#pg 'ˆ‹‡†‡‹”‰‹ŒŠ“tuuvvwxxyzz{{Á|}~~€€‚‚ƒƒ…†„ƒ†‡ˆˆ‰Š‹x6'tn &‰……††‰ˆ‰‰ŠŒstuuvvwxxyzz{{}~ô}~€€‚‚ƒƒ…††‡ˆŠÛy:'w{ &’Šˆ††’”’›sstuuvvwxxyzz{}ò~}~~€€‚‚ƒƒ…††‡×ˆ‰Šz?'wŽŒAˆ†ˆ’“‹™–˜rsstuuvvwxxyzz{þ|}}~ö€€‚‚ƒƒ…††‡ßˆ‰{S9Ž}a‹ŠŽŒ…‡š—š‘Šqqsstuuøvwwxyyz{{Ñ}|}}~~€€‚‚ƒ„……††‡ˆˆ‰|AlŒo!p‘‘Ž‘•›™’•‰qqsòtuuvvwxxyyz{{||}~ö€€‚‚ƒ„…††Ó‡ˆˆ}KlŒŒcu‘’ŽŒš›š˜Š‘ppqqsstuuvvwwxyyz{{|}Ø~€€‚‚ƒ„…††‡‡ˆˆ‰Š‹‹ŒŠ\x‹•š››šš›˜ppqsÃtuuvvwxxyyz{z{||}}~~€€‚‚ƒ„……†‡‡ˆ‰ŠŠ‹‹ˆ_$  ‚•™šš››œœ›oppqqstÎuvvwxxyyzyz{||}}~~€€‚‚ƒ„„††‡‡ˆ‰Š…{0 #“•˜™™š››œûnoppqqstùuvvwxxyyýz{||ø}~~€€‚‚ý„…††ä‡ŒŽ<8:–—˜˜™™š››œ›nnoppqqstuövwxxyxxyz||}~û€€‚‚󅆆„‚‰Ž‘’“Ž8ú?•——˜™™õš››œmnnoopqqstûuvvwxxyþz||}~䀀‚ƒ„ƒƒˆŽ‘’…† 2l“”—˜™™õ•“šlmnnoopqqsótuvvwxwwxxyz||Ô}~~€€‚ƒƒ~yˆŽ‘’{ W––—–˜—Œ’”llmnnoopqqstôuvvwvwxxyy{||}~×€€~}€‡ŒŽŽ‡d TŽ–‹•—‘”Žkllmnnoopqqúrsttuvvwxyþ{||Ó}}~†|sv„ŒŒŽŽŽŒ‡`Z\’Š—–‰ˆ‹jkllmnnoopqqstùuvuvvwxxïy{|}|uttqrsxƒ†ŠŒŽŽã†~_LG‹—••jjkklmnnoopqqstuvwÌxyy{vroopqrtt{ƒ‡‹‡‰…~v`>(R–——ŒŒŽijjkllmnnoopqqstuøvwwxzysoopÖrty‚‚v€ƒxz~…‚†wU#5;A‘ˆˆƒiijjkllmnnoopqqsòtsttuvvwwy{vnoopÕvzz|y~xx}……ƒ~|rU 6?>4lhhijjkllmnnoopqqst÷uvvwwxxnooÓqsqvvwwtv}‡|z~„~gK  8ghhiijkklmnnoopqqðsrssttuvvwyynstooÒrqrsstw}yz{}€|z{jO@+  gghhijjkllmnnoopqqrrstÜuvvwtsyvtwoopqqrstuwvw|zxz†‡ƒr]NH í fgghhijjkllmmnoopqqrstÂuvvwwxxywwroqqrststz€|{…†‡†…ˆ‰†jRSTS(efgghhijjkllmnnoopqpqrrssötuvvwwxyyxxtýuyþ„……݆‡‡ˆˆ‰‰Š‹Œ|ceefgghhijjkllmnnoopopqrrs÷tuvvwwxyzzíywruy~€‚ƒ„„……†‡‡ˆˆé‰‹‹Œdeefgghhijjkllmmnoopþqrråsttuvvwwxyz{{yz}~€€‚ƒ„„……À†‡‡ˆˆŠ‹‹Œddeefgghhijjkllmmnonoppqrrssttuvvwxxyz{{||}~€‚ƒƒ„„……†è‡ˆ‰Š‹cddeefgghhijjkkllmnnÝoppqrrsstuuvvwxxyz{{||~~€‚ƒƒ„„……ð†‡‡‰‰Šbcddeefgghhjükllmmnoïpqrrsstuuvvwxyyz{{ò|~~€‚ƒƒ„„……ð†‡ˆ‰‰bbcddeefgghhjÕkllmlmnnoppqrrssttuvvwxyyzz{{}~~€‚ƒƒ„„……ð†‡ˆ‰abbcddeefgghhjåkllklmnnoppqrrsstuuvvwxyyz{{ö}~~€‚ƒƒþ„……ð‡ˆˆ`abbccdeefgghhjåklkllmnnoppqrrsstuuvwwxyyz{{ò}~~€‚ƒƒ„„……‡`ôabbccdeefgghhjklùmnoopqrr¡sttuuvwwxyyz{{|}~~€‚ƒƒ„„……†‡_``abbccdeefgghhijjkllmmnoopqqrrsttuuvwwxyyzz{||}~~€‚ƒƒ„„…††þþýþþýþýþýþþýýþþýþþýþýþýþýþøýþýýþýýþþýýþýþþüýþýþþýþýþýýþýýþýýþýýþýüþýýþþýùþýýþýýþþýýþýýøþýþþýþýþþýþþýýýþýþþýýþýýþþýþþúýþýýþýýûþýýþýýþýþýþþýýþöýþýþþýþýþýýýþýþþüýþþýýþýþýþþýýüþýþýýþþýýþýþýþþýýþýþùýþýýþýþþýýþýþþýûþýþþýýùþýþýþþýýþþýþþýþýüþýýþþýþýóþýýþýþýýþýýþýýüþýýþþýþýþþýýþýþýþýþýýþýýþýüþýýþþýûþýþþýýþþýýþýþýþþýýþþýýþþýýþýþþýýþõýþýýþýýþþýþþýþþýýøþýýþýþþýýþýþþýýþýþþýýþýþþýýþúýþýþýþþýþõýþþýþýýþýþýýúþýýþþýýöþýýþþýþþýþþûýþþýþþþýþþýüþýþýýþýþüýþþýýûþýþýþþþýþþýþýþûýþýþýýþþýýþþýýþþýýþþýýþûýþþýþ þþýþþýüþýþýýûþýýþýýúþýýþþýýþþýýþýþüýþýþþþýþþýþýþýþþýýþþýýùþýþþýþýýþý þþýþþþýþþýþýþûýþýýþþýùþýýþýþýýþýþþýýýþýþ þüýþýþþüýþþýýþýþýþþýýýþýþþýþýþýúþýþþýþ þîýþýþýþýþþýþýþýýþþýýþýþýþýþýþþýþ þþýþþüýþýþþýûþýýþýýþýûþýþþýýþýýþýýþýþþýýýþýþþþýþ þýþþýþþýþþýýþý÷þýýþýýþþýýüþýþýýþþýýþýþýþýûþýýþýýþþýýýþýþþþýþ þþýþþýþûýþþýþþýûþýýþýýþþýýþûýþþýþþþýþþúýþýþýþþýþýûþýýþýýþýþýþýþþýþþùýþýþýþýýþýþýþýþýûþýýþýýþþýýþþýýûþýþýþþýþþýýþýþþýýþþýýüþýþýýþþýýþýþýþþýþþúýþýýþýýþýþýýþýýþþýýüþýýþþýþöýþýþýþýþýþþþýþþýþþýýõþýýþþýýþýþýýþýüþýýþþþýþþýûþýýþýýþþýýþþýýþþýýþþýýþþýýýþýþþþýþþþýþþþýþþüýþýþþúýþþýþýýþþý ýüþýýþþýýþýþþý þþýþþúýþþýþýýøþýýþþýýþþýþþýýþþýýþþýýþûýþþýþþýþþýþþýþýþýýþýýþþýýþþýýþþýýþýþþýþþýýþýýþþýþþöýþþýýþþýþýýþþýýþýþýþüýþýþþþýþþüýþýþþýýþýýþþýýþýþýþþýýþýýþýýýþýþþþýþ þûýþþýþþýýþýþþýþþýýþýþýþýþýþþýþþþýþþýþüýþþýýüþýýþþýþýþýýþýýþýþýþýþþýýýþýþþýþýøþýýþýþýþþýþýþþýþ þýûþýþþýýþýþýýþýýþùýþþýýþýý÷þýþþýþþýþþþýþþþýþþýüþýýþþýþþýýþþýýþþýýþþýýüþýýþþüýþýþþþýþþýñþýþýýþþýþýþýþþý ýþýþýýþýýþþýþ þþýþþýýþýþþýþýþýþþýýýþýþþýþþýþþþýþþùýþýýþþýýûþýýþýýþýüþýþýýþýûþýþþýýýþýþþý þüýþþýýþþýýþþýýþþýýþýþýþýþþýýþþýþþþýþþùýþþýýþýýùþýþþýýþþýþýþýþýþüýþýþþýþýøþýýþýýþýýþýýþýýüþýýþþþýþþýþýþúýþþýþýýüþýýþþýþþýýþþýýþþýý÷þýýþýþþýþþýþøýþýþýþþýýþþýýðþýýþýþýþýþýþþýþýýþýüþýþýýûþýýþýýýþýþþýþúýþþýýþþüýþþýýþþýýüþýýþþùýþþýþþýýúþýýþýþþþýþþýýþýýþþýýþôýþþýýþýþýýþýýþýþþýþ þúýþþýþýýüþýþýýüþýýþþùýþýþýþýýþþýýûþýþýþþþýþþþýþþýþýþýþýþýþþýýþýþþýþ þýùþýþþýýþþýþþýýþýþþýýþýþþýýþþýþ þýþþýýþþýýøþýýþýþþýýþýþþýýþýþüýþýþþûýþþýþþýýþýþþý þýüþýýþþýýþýýüþýýþþþýþþøýþýþýþýþþýýþýýþþýþþýýþýþþýþýýþýýþýýþýýþýüþýþýýþýþþýýþþýþþþýþþýþþýýöþýþýþýþþýþþýþþýýûþýýþýýüþýýþþûýþþýþþùýþþýþþýýþý÷þýýþþýþþýýþýýþýþþýûþýýþýýþþýþþüýþýþþþýþþüýþþýýþýýþýýôþýýþýýþýþýýþþýþûýþþýþþþýþþýýþýýüþýþýýþýõþýýþþýýþýýþþýüþýýþþþýþþþýþþøýþþýþýýþþýòþýþýýþýýþýýþþýýóþýýþýþýþþýþýþ>þš×›œžžŸŒ@ Š£¤£†Š·¯½¿¿ÀÁÁÂÂÃÄÄÅÆÇÈÉÉõÊËÌÌÍÎÎÏÐÐÑÑÓûÔÕÕ÷ššó›œžž‘P~££ý–û$|¯´¿¿óÀÁÁÂÂÃÄÄÅÆÇÇÉÉõÊËÌÌÍÎÎÏÏÐÑÑÓüÔ÷™ššç›œž–en££¸›v©·½¿¿ðÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËøÌÍÎÎÏÐÐÑÑÓûÔ÷˜™ššç›œš}Z¢£½œv³´¼¾¿¿æÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËÌÌÍÍÎÏÐÐÑÑÓû÷˜˜™šš›œë‘ C¡±½œ#jµ´»½¾¿¿æÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËÌÌÍÎÎÏÏÐÑÑÞÓ÷—˜˜™™šš››œœ* ¹¼—2_¯°±±»¸¿¿ðÀÁÁÂÃÄÄÅÆÆÇÈÈÉÊËËøÌÍÍÎÏÏÐÑÑÝ÷–——˜™™šš››” ¬º»’DE®¬©º¯¯¾¾¿¿ÝÀÁÁÂÃÄÄÅÆÆÇÈÈÉÊËËÌÌÍÍÎÏÏÐÑÑ÷•–——˜™ššæ›%²º¸šZ3´¸¶«·¼½¾¾¿¿ÝÀÁÁÂÃÄÄÅÆÆÇ¿ÇÉÊÊËËÌÍÍÎÏÏÐÑ÷”•–——˜™ššæˆ 3«¹¬™o ,¯³­º»»¼¼¾¾¿¿ÁÀÁÂÂÃÄÄÅÆÇÇÈÈÉÊÊËÌÌÍÎÎÏÏÐ÷”••–—˜™™šš† 3¢°¯š~¤¬¸¹º»»¼¼¾¾¿¿¦ÀÁÂÂÃÄÄÅÆÇÇÈÈÉÉÊËÌÌÍÍÎÏÏ÷””••–—˜›¡,1˜ª°ž¦·¸¹¹º»»¼¼¾¾¿¿ÀÁÁÂÂÃÄÅÆÆÇÇÈÈÉÊÊËÌÌÍÍÎÏ÷””•ï–œ¦¬²ž9/¶©ŸšÖª··¸¸ºº»»¼¼½¾¿¿ÀÁÁÂÂÃÄÅÅÆÇÇÈÈÉÉÊËËÌÍÎÎ÷¬­­£®¯±±²² @-u¶¡ž¤  «¶·¶´¹¹º»»¼¼½¾¿¿ÀÁÁÂÂÃÄÅÅÆÇÇÈÈÉÉÊËÌÌÍÍ÷¬¬­®®¯°±°°ŸF *q±”®¶¶±µ¸¹ººû»¼¼½¿¿çÀÁÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌÌÍ÷«¬­­Ü®¯ªŸŸ™Ep¥œžŽ#­¶µ··¸¸¹¹ºº»¼¼½¿¿ÀÍÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌÌ÷¡ ª¬­®¯¡›£™F'iœœˆ(ªµ¶¶··¸¸ø¹ºº»¼½½¿¿ÀÝÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌ÷’˜§«­­«ª®¬ªL(Y››÷ƒ *šµ¶¶·õ¸¶³¹ºº»¼½½¿¿ÐÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊË÷£¤™¡« ¢¯¯°ªK&?šš›€&%¦´µ¶¶ó·¶²¬¬¹ºº»¼»½¿¿ÐÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÉÊ÷©¥ŸŸšŸ©®¯¯¡K/šš ~'"³³µ¶¶·¸ä¹º»º´ª¶¾¿¿ÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊ÷©©œô¬­­®¯šG.ššô~*%˜¬³³µ¶¶·¸Ù¹ºº¸³¸½¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉ÷©©ª««¬ª­­©Š9ï0™››ˆ1$‘¬²³³µ¶¶ú·¸¹¹º»»½Ì¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈ÷™–•”“‘“ž›”‚D1˜›š‰2/”¬²²³³µµ¶¶Æ·¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈ÷ŽŽ‘‘’’“‰W.›˜š“74­±²²³³þµ¶¶à·¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇ÷ŽŽ‘‘û’“‘|ï)•˜˜’8 /“°°±²²³³þ´¶¶·á¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇ÷ŽŽ‘‘ü’‘{ê‘—˜¤I)•¯°°±±²²³³´¶¶ß·¸¸¹ºº»¼½½¾¾¿¿ÀÁÂÂÃÃÄÅÅÆ÷ŒŽŽ‘‘ý’jðŒ——–G '’®¯°°±±û²³³´¶¶È·¸¸¹ºº»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅ÷ŒŒ™•™‘“—g‡£‘J!’®®¯°°±±û²³³µ¶¶Ê·¸¸¹ºº»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅ÷ŒŽŽŽ•–‘™n•ššc­­®¯°°±û²³³´¶¶Â·³²¸¹»»¼½½¾¾¿ÀÀÁÁÂÃÃÄ÷Š‹ŒŽ“ž’’ˆ&v˜š–y¬­­®¯¯°°±±²³´¶¶ö´¯¬´¹º»»¼½½¾ÀÜÁÂÂÃÃ÷‹›‹Œ––’—‘„# -q™œž…‹¬¬­®®ö¯°°±±²³´µ¶¶ö·¸ºº»»¼½½¾¾ã¿ÀÁÁÂÃ÷‹—“‹š›‘š{*#U›”›Ÿý ˆ¬¬þ­®®ö¯°°±±²³³´¶¶ö·¹ºº»»¼½½¾¾ÀáÁÂÂ÷Š‘‹’’˜“•™™xJK¢™¤‘$…¬¬­®é¯°°±²²³³´µ¶¶·¸¹¹º»»¼½½¾¾ÀáÁ«‰Žš—ž‘™–†T ,–¢  '«¬¬æ­®®¯°°±±²³³´µ¶¶¸¸¹¹º»»¼½½¾¾ÀáÁ÷ŠŒ™–‘“œž’•¢¤ž† /¢¨¦§‚ x©ª¬¬è­®®¯¯°±±²³³´´µ·¸¸¹¹º»»¼½½¾Àá÷—˜™Š•›™›ž£¥¡„l‚§§¨©…%*tŸ§«¬¬æ­®®¯°°±±²³³´µ¶·¸¸¹¹º»»¼½½¾¾íÀ÷˜™—‘Š–›œ•žŸ¤¤¥¥¦§§ô¨ˆ/,v¨ £«¬¬­ê®¯°°±±²³³´µµ·¸¸¹¹º»»¼½½¾ô÷–˜˜—˜šš››££ü¤¥¦§§ó:!s¨¨§¢©«¬¬®¯æ°±±²³³µµ¶·¸¸¹¹º»»¼½½¾¾÷˜—™™šö›œ™¢£¤¥¥¦§§òŒK#a¨ª¦¤§ª«¬¬ô­®®¯¯°±±²³´µµ·ø¸¹¹º»»¼½½é÷˜•—˜™˜•–š›“¢££¤¥¥¦¦’Mõ;„ ¡¬¨›Ÿ©«¬¬ô­®®¯¯°±±²´´µµÏ·¸¸¹¹º»»¼½½÷™‘—˜Œ‰‹—š—¡¢££¤¥£œ‹_&f¨§§£¨Ÿ¨©««¬¬Á­®®¯¯°±²³´´µµ¶·¸¸¹¹º»»¼½÷›••—’Š‰‰” ¡¢¢££¤¢™c _©©¥š§ª¨¦¨©ª«¬¬Á­®®¯¯°±³³´´µµ¶·¸¸¹¹º»»¼÷›š—––‘’œŸ ¡›ž£¤¤ ‰e©¥ž «©¤Ÿ¦ª«¬¬ß­®®¯¯°²³³´´µµ¶·¸¸¹¹º»»÷››•”–—žŸŸä›œ•”££–K¦¦Ÿ¡§§œ¨¬©£¥©««¬¬­Ø®¯°±²³³´´µµ¶·¸¸¹¹º»÷›š“––‘–›˜ŸŸœ–š™™œ¢žíF§¥ š˜¥£¦««ª§§©ª«¬¬­Ã®°±±²³³´´µµ¶··¸¹¹º÷™•’‰Œ’žš”œ’™——š™˜k§§¦£ £¡•§«§›¢©ª«¬¬Ú­®¯°±±²³³´´µµ¶·¸¸¹¹÷Š†“•“œ•˜‘‹Žýh¦§§ñ¤Ÿ ©¨§¨¬¨¦§©««¬¬Ü­®¯°±±²³³´´µµ¶··¸¹÷……‘–˜š›Ž–’‹Š‰‰ú f›¤¦§§Á¥Ÿ˜¦§£ž¤©§ž¢©ª«¬¬­®¯¯°±±²³³´´µµ¶··¸÷ƒƒ„„“”•’’X& tš—œ¦§§Ñ¡Ÿ©©¢ ¥œ›©©ªª¬¬­®¯¯°±±²³³´´µµ¶··÷„ƒƒ„‰Ž”••G>$Ôwšœœ¤¦¦§§¥ ž§¨¥£¡ž˜Ÿ¦©ªª¬­®®¯¯°±±²²³´´µµø·÷?<==>CCê) q“˜œœ›–›¥¦§§ê¦ œ¨¦œ•–™¡©©ª«¬­®®¯¯°±±ö²³´´µµ¶÷å Olˆ‹Š”œ˜—Ÿ¥¦§§Þ¥˜¥¨¨£¡›¨©©ª«¬­®®¯¯°±±²²³´´µµ÷ó  Jr“‰‰›Š‹‹Œ“šžœ¢¥§§¢Ÿ¡¦©©œ—›¨¨©ª««¬­­®¯¯°±±²²³´´µ÷ TUXdƒ•—’ˆ‰‹Š‹‹Œ“š˜˜¥§¦¢™“¢¡—™¦¨¨©ª««¬­­®¯¯°±±í²³´´÷[][SQOSZ{‘““”••Î‰‹‘˜•Ž‹‹•šžŸ  ŸŸ ”Ÿšš ˜›¤§¨¨©ª««¬­­®¯¯°±±²²³³÷ŽŽü‘’’“Ì”••––—˜˜•’Ž‹’””“–¤¦œ”›Ÿ£¦§¨©ªª««¬­­®¯¯°±±²²³÷Ž‘’“Ò”••––—˜™—’Ž‹‹Œ’ž ›“¢– –œ£¦§¨©ªª««¬­­®¯¯°±±½²÷‹‹ŒŽŽ‘‘’’““”••––—™™š™–“‘’Ž— ¡žž˜˜Ÿ¥¦¦§¨©ªª««¬­­®¯¯°±±²÷‹‹÷ŒŽ‘‘÷’““”•––—™™š€œ›œ‘‘“——š›œž ¢¢¤¦§¨¨§£ª««¬­­®¯¯°±±÷ŠŠ‹‹ŒŽ‘‘’““”••––—˜™™šš››–™Ž•™˜’‘‘’“””“”•–—˜˜ªª««¬­­®¯¯°±÷‰‰Š‹‹ŒŽ‘‘’““”••––—˜™™šš›š›˜— Ÿ–•–›£¥¥¤¥¦§§¨¨©ªª««­ö®¯¯°÷ˆ‰‰Š‹‹ýŒ‘æ’““”••––—˜˜™šš››œžžŸŸ ¡¢¢É£¤¥¦§§¨¨©ªª««¬­­®¯¯÷ˆˆ‰‰Š‹‹ŒŒŽ‘‘’““”••––—˜™™šš››œžüŸ ¡¢¢æ£¤¥¦§§¨¨©ªª««¬­­®¯÷‡‡ˆ‰‰Š‹‹ýŒ‘î’““”••––—˜™™šš››œûžŸ  ¢¢­£¤¥¥¦§§¨¨©©ª««¬­­®÷‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®š×›œžžŸŒ@ Š£¤£†Š·¯½¿¿ÀÁÁÂÂÃÄÄÅÆÇÈÉÉõÊËÌÌÍÎÎÏÐÐÑÑÓûÔÕÕ÷ššó›œžž‘P~££ý–û$|¯´¿¿óÀÁÁÂÂÃÄÄÅÆÇÇÉÉõÊËÌÌÍÎÎÏÏÐÑÑÓüÔ÷™ššç›œž–en££¸›v©·½¿¿ðÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËøÌÍÎÎÏÐÐÑÑÓûÔ÷˜™ššç›œš}Z¢£½œv³´¼¾¿¿æÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËÌÌÍÍÎÏÐÐÑÑÓû÷˜˜™šš›œë‘ C¡±½œ#jµ´»½¾¿¿æÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËÌÌÍÎÎÏÏÐÑÑÞÓ÷—˜˜™™šš››œœ* ¹¼—2_¯°±±»¸¿¿ðÀÁÁÂÃÄÄÅÆÆÇÈÈÉÊËËøÌÍÍÎÏÏÐÑÑÝ÷–——˜™™šš››” ¬º»’DE®¬©º¯¯¾¾¿¿ÝÀÁÁÂÃÄÄÅÆÆÇÈÈÉÊËËÌÌÍÍÎÏÏÐÑÑ÷•–——˜™ššæ›%²º¸šZ3´¸¶«·¼½¾¾¿¿ÝÀÁÁÂÃÄÄÅÆÆÇ¿ÇÉÊÊËËÌÍÍÎÏÏÐÑ÷”•–——˜™ššæˆ 3«¹¬™o ,¯³­º»»¼¼¾¾¿¿ÁÀÁÂÂÃÄÄÅÆÇÇÈÈÉÊÊËÌÌÍÎÎÏÏÐ÷”••–—˜™™šš† 3¢°¯š~¤¬¸¹º»»¼¼¾¾¿¿¦ÀÁÂÂÃÄÄÅÆÇÇÈÈÉÉÊËÌÌÍÍÎÏÏ÷””••–—˜›¡,1˜ª°ž¦·¸¹¹º»»¼¼¾¾¿¿ÀÁÁÂÂÃÄÅÆÆÇÇÈÈÉÊÊËÌÌÍÍÎÏ÷””•ï–œ¦¬²ž9/¶©ŸšÖª··¸¸ºº»»¼¼½¾¿¿ÀÁÁÂÂÃÄÅÅÆÇÇÈÈÉÉÊËËÌÍÎÎ÷¬­­£®¯±±²² @-u¶¡ž¤  «¶·¶´¹¹º»»¼¼½¾¿¿ÀÁÁÂÂÃÄÅÅÆÇÇÈÈÉÉÊËÌÌÍÍ÷¬¬­®®¯°±°°ŸF *q±”®¶¶±µ¸¹ººû»¼¼½¿¿çÀÁÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌÌÍ÷«¬­­Ü®¯ªŸŸ™Ep¥œžŽ#­¶µ··¸¸¹¹ºº»¼¼½¿¿ÀÍÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌÌ÷¡ ª¬­®¯¡›£™F'iœœˆ(ªµ¶¶··¸¸ø¹ºº»¼½½¿¿ÀÝÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌ÷’˜§«­­«ª®¬ªL(Y››÷ƒ *šµ¶¶·õ¸¶³¹ºº»¼½½¿¿ÐÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊË÷£¤™¡« ¢¯¯°ªK&?šš›€&%¦´µ¶¶ó·¶²¬¬¹ºº»¼»½¿¿ÐÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÉÊ÷©¥ŸŸšŸ©®¯¯¡K/šš ~'"³³µ¶¶·¸ä¹º»º´ª¶¾¿¿ÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊ÷©©œô¬­­®¯šG.ššô~*%˜¬³³µ¶¶·¸Ù¹ºº¸³¸½¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉ÷©©ª««¬ª­­©Š9ï0™››ˆ1$‘¬²³³µ¶¶ú·¸¹¹º»»½Ì¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈ÷™–•”“‘“ž›”‚D1˜›š‰2/”¬²²³³µµ¶¶Æ·¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈ÷ŽŽ‘‘’’“‰W.›˜š“74­±²²³³þµ¶¶à·¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇ÷ŽŽ‘‘û’“‘|ï)•˜˜’8 /“°°±²²³³þ´¶¶·á¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇ÷ŽŽ‘‘ü’‘{ê‘—˜¤I)•¯°°±±²²³³´¶¶ß·¸¸¹ºº»¼½½¾¾¿¿ÀÁÂÂÃÃÄÅÅÆ÷ŒŽŽ‘‘ý’jðŒ——–G '’®¯°°±±û²³³´¶¶È·¸¸¹ºº»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅ÷ŒŒ™•™‘“—g‡£‘J!’®®¯°°±±û²³³µ¶¶Ê·¸¸¹ºº»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅ÷ŒŽŽŽ•–‘™n•ššc­­®¯°°±û²³³´¶¶Â·³²¸¹»»¼½½¾¾¿ÀÀÁÁÂÃÃÄ÷Š‹ŒŽ“ž’’ˆ&v˜š–y¬­­®¯¯°°±±²³´¶¶ö´¯¬´¹º»»¼½½¾ÀÜÁÂÂÃÃ÷‹›‹Œ––’—‘„# -q™œž…‹¬¬­®®ö¯°°±±²³´µ¶¶ö·¸ºº»»¼½½¾¾ã¿ÀÁÁÂÃ÷‹—“‹š›‘š{*#U›”›Ÿý ˆ¬¬þ­®®ö¯°°±±²³³´¶¶ö·¹ºº»»¼½½¾¾ÀáÁÂÂ÷Š‘‹’’˜“•™™xJK¢™¤‘$…¬¬­®é¯°°±²²³³´µ¶¶·¸¹¹º»»¼½½¾¾ÀáÁ«‰Žš—ž‘™–†T ,–¢  '«¬¬æ­®®¯°°±±²³³´µ¶¶¸¸¹¹º»»¼½½¾¾ÀáÁ÷ŠŒ™–‘“œž’•¢¤ž† /¢¨¦§‚ x©ª¬¬è­®®¯¯°±±²³³´´µ·¸¸¹¹º»»¼½½¾Àá÷—˜™Š•›™›ž£¥¡„l‚§§¨©…%*tŸ§«¬¬æ­®®¯°°±±²³³´µ¶·¸¸¹¹º»»¼½½¾¾íÀ÷˜™—‘Š–›œ•žŸ¤¤¥¥¦§§ô¨ˆ/,v¨ £«¬¬­ê®¯°°±±²³³´µµ·¸¸¹¹º»»¼½½¾ô÷–˜˜—˜šš››££ü¤¥¦§§ó:!s¨¨§¢©«¬¬®¯æ°±±²³³µµ¶·¸¸¹¹º»»¼½½¾¾÷˜—™™šö›œ™¢£¤¥¥¦§§òŒK#a¨ª¦¤§ª«¬¬ô­®®¯¯°±±²³´µµ·ø¸¹¹º»»¼½½é÷˜•—˜™˜•–š›“¢££¤¥¥¦¦’Mõ;„ ¡¬¨›Ÿ©«¬¬ô­®®¯¯°±±²´´µµÏ·¸¸¹¹º»»¼½½÷™‘—˜Œ‰‹—š—¡¢££¤¥£œ‹_&f¨§§£¨Ÿ¨©««¬¬Á­®®¯¯°±²³´´µµ¶·¸¸¹¹º»»¼½÷›••—’Š‰‰” ¡¢¢££¤¢™c _©©¥š§ª¨¦¨©ª«¬¬Á­®®¯¯°±³³´´µµ¶·¸¸¹¹º»»¼÷›š—––‘’œŸ ¡›ž£¤¤ ‰e©¥ž «©¤Ÿ¦ª«¬¬ß­®®¯¯°²³³´´µµ¶·¸¸¹¹º»»÷››•”–—žŸŸä›œ•”££–K¦¦Ÿ¡§§œ¨¬©£¥©««¬¬­Ø®¯°±²³³´´µµ¶·¸¸¹¹º»÷›š“––‘–›˜ŸŸœ–š™™œ¢žíF§¥ š˜¥£¦««ª§§©ª«¬¬­Ã®°±±²³³´´µµ¶··¸¹¹º÷™•’‰Œ’žš”œ’™——š™˜k§§¦£ £¡•§«§›¢©ª«¬¬Ú­®¯°±±²³³´´µµ¶·¸¸¹¹÷Š†“•“œ•˜‘‹Žýh¦§§ñ¤Ÿ ©¨§¨¬¨¦§©««¬¬Ü­®¯°±±²³³´´µµ¶··¸¹÷……‘–˜š›Ž–’‹Š‰‰ú f›¤¦§§Á¥Ÿ˜¦§£ž¤©§ž¢©ª«¬¬­®¯¯°±±²³³´´µµ¶··¸÷ƒƒ„„“”•’’X& tš—œ¦§§Ñ¡Ÿ©©¢ ¥œ›©©ªª¬¬­®¯¯°±±²³³´´µµ¶··÷„ƒƒ„‰Ž”••G>$Ôwšœœ¤¦¦§§¥ ž§¨¥£¡ž˜Ÿ¦©ªª¬­®®¯¯°±±²²³´´µµø·÷?<==>CCê) q“˜œœ›–›¥¦§§ê¦ œ¨¦œ•–™¡©©ª«¬­®®¯¯°±±ö²³´´µµ¶÷å Olˆ‹Š”œ˜—Ÿ¥¦§§Þ¥˜¥¨¨£¡›¨©©ª«¬­®®¯¯°±±²²³´´µµ÷ó  Jr“‰‰›Š‹‹Œ“šžœ¢¥§§¢Ÿ¡¦©©œ—›¨¨©ª««¬­­®¯¯°±±²²³´´µ÷ TUXdƒ•—’ˆ‰‹Š‹‹Œ“š˜˜¥§¦¢™“¢¡—™¦¨¨©ª««¬­­®¯¯°±±í²³´´÷[][SQOSZ{‘““”••Î‰‹‘˜•Ž‹‹•šžŸ  ŸŸ ”Ÿšš ˜›¤§¨¨©ª««¬­­®¯¯°±±²²³³÷ŽŽü‘’’“Ì”••––—˜˜•’Ž‹’””“–¤¦œ”›Ÿ£¦§¨©ªª««¬­­®¯¯°±±²²³÷Ž‘’“Ò”••––—˜™—’Ž‹‹Œ’ž ›“¢– –œ£¦§¨©ªª««¬­­®¯¯°±±½²÷‹‹ŒŽŽ‘‘’’““”••––—™™š™–“‘’Ž— ¡žž˜˜Ÿ¥¦¦§¨©ªª««¬­­®¯¯°±±²÷‹‹÷ŒŽ‘‘÷’““”•––—™™š€œ›œ‘‘“——š›œž ¢¢¤¦§¨¨§£ª««¬­­®¯¯°±±÷ŠŠ‹‹ŒŽ‘‘’““”••––—˜™™šš››–™Ž•™˜’‘‘’“””“”•–—˜˜ªª««¬­­®¯¯°±÷‰‰Š‹‹ŒŽ‘‘’““”••––—˜™™šš›š›˜— Ÿ–•–›£¥¥¤¥¦§§¨¨©ªª««­ö®¯¯°÷ˆ‰‰Š‹‹ýŒ‘æ’““”••––—˜˜™šš››œžžŸŸ ¡¢¢É£¤¥¦§§¨¨©ªª««¬­­®¯¯÷ˆˆ‰‰Š‹‹ŒŒŽ‘‘’““”••––—˜™™šš››œžüŸ ¡¢¢æ£¤¥¦§§¨¨©ªª««¬­­®¯÷‡‡ˆ‰‰Š‹‹ýŒ‘î’““”••––—˜™™šš››œûžŸ  ¢¢­£¤¥¥¦§§¨¨©©ª««¬­­®÷‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®š×›œžžŸŒ@ Š£¤£†Š·¯½¿¿ÀÁÁÂÂÃÄÄÅÆÇÈÉÉõÊËÌÌÍÎÎÏÐÐÑÑÓûÔÕÕ÷ššó›œžž‘P~££ý–û$|¯´¿¿óÀÁÁÂÂÃÄÄÅÆÇÇÉÉõÊËÌÌÍÎÎÏÏÐÑÑÓüÔ÷™ššç›œž–en££¸›v©·½¿¿ðÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËøÌÍÎÎÏÐÐÑÑÓûÔ÷˜™ššç›œš}Z¢£½œv³´¼¾¿¿æÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËÌÌÍÍÎÏÐÐÑÑÓû÷˜˜™šš›œë‘ C¡±½œ#jµ´»½¾¿¿æÀÁÁÂÂÃÄÅÆÆÇÇÈÉÊËËÌÌÍÎÎÏÏÐÑÑÞÓ÷—˜˜™™šš››œœ* ¹¼—2_¯°±±»¸¿¿ðÀÁÁÂÃÄÄÅÆÆÇÈÈÉÊËËøÌÍÍÎÏÏÐÑÑÝ÷–——˜™™šš››” ¬º»’DE®¬©º¯¯¾¾¿¿ÝÀÁÁÂÃÄÄÅÆÆÇÈÈÉÊËËÌÌÍÍÎÏÏÐÑÑ÷•–——˜™ššæ›%²º¸šZ3´¸¶«·¼½¾¾¿¿ÝÀÁÁÂÃÄÄÅÆÆÇ¿ÇÉÊÊËËÌÍÍÎÏÏÐÑ÷”•–——˜™ššæˆ 3«¹¬™o ,¯³­º»»¼¼¾¾¿¿ÁÀÁÂÂÃÄÄÅÆÇÇÈÈÉÊÊËÌÌÍÎÎÏÏÐ÷”••–—˜™™šš† 3¢°¯š~¤¬¸¹º»»¼¼¾¾¿¿¦ÀÁÂÂÃÄÄÅÆÇÇÈÈÉÉÊËÌÌÍÍÎÏÏ÷””••–—˜›¡,1˜ª°ž¦·¸¹¹º»»¼¼¾¾¿¿ÀÁÁÂÂÃÄÅÆÆÇÇÈÈÉÊÊËÌÌÍÍÎÏ÷””•ï–œ¦¬²ž9/¶©ŸšÖª··¸¸ºº»»¼¼½¾¿¿ÀÁÁÂÂÃÄÅÅÆÇÇÈÈÉÉÊËËÌÍÎÎ÷¬­­£®¯±±²² @-u¶¡ž¤  «¶·¶´¹¹º»»¼¼½¾¿¿ÀÁÁÂÂÃÄÅÅÆÇÇÈÈÉÉÊËÌÌÍÍ÷¬¬­®®¯°±°°ŸF *q±”®¶¶±µ¸¹ººû»¼¼½¿¿çÀÁÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌÌÍ÷«¬­­Ü®¯ªŸŸ™Ep¥œžŽ#­¶µ··¸¸¹¹ºº»¼¼½¿¿ÀÍÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌÌ÷¡ ª¬­®¯¡›£™F'iœœˆ(ªµ¶¶··¸¸ø¹ºº»¼½½¿¿ÀÝÁÂÃÄÄÅÅÆÇÇÈÈÉÉÊËÌ÷’˜§«­­«ª®¬ªL(Y››÷ƒ *šµ¶¶·õ¸¶³¹ºº»¼½½¿¿ÐÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊÊË÷£¤™¡« ¢¯¯°ªK&?šš›€&%¦´µ¶¶ó·¶²¬¬¹ºº»¼»½¿¿ÐÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÉÊ÷©¥ŸŸšŸ©®¯¯¡K/šš ~'"³³µ¶¶·¸ä¹º»º´ª¶¾¿¿ÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉÊ÷©©œô¬­­®¯šG.ššô~*%˜¬³³µ¶¶·¸Ù¹ºº¸³¸½¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈÉ÷©©ª««¬ª­­©Š9ï0™››ˆ1$‘¬²³³µ¶¶ú·¸¹¹º»»½Ì¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈÈ÷™–•”“‘“ž›”‚D1˜›š‰2/”¬²²³³µµ¶¶Æ·¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇÈ÷ŽŽ‘‘’’“‰W.›˜š“74­±²²³³þµ¶¶à·¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇÇ÷ŽŽ‘‘û’“‘|ï)•˜˜’8 /“°°±²²³³þ´¶¶·á¸¹ºº»»¼½¾¾¿ÀÀÁÂÂÃÄÄÅÅÆÇ÷ŽŽ‘‘ü’‘{ê‘—˜¤I)•¯°°±±²²³³´¶¶ß·¸¸¹ºº»¼½½¾¾¿¿ÀÁÂÂÃÃÄÅÅÆ÷ŒŽŽ‘‘ý’jðŒ——–G '’®¯°°±±û²³³´¶¶È·¸¸¹ºº»¼½½¾¾¿ÀÀÁÁÂÃÃÄÅÅ÷ŒŒ™•™‘“—g‡£‘J!’®®¯°°±±û²³³µ¶¶Ê·¸¸¹ºº»¼½½¾¾¿ÀÀÁÂÂÃÃÄÅ÷ŒŽŽŽ•–‘™n•ššc­­®¯°°±û²³³´¶¶Â·³²¸¹»»¼½½¾¾¿ÀÀÁÁÂÃÃÄ÷Š‹ŒŽ“ž’’ˆ&v˜š–y¬­­®¯¯°°±±²³´¶¶ö´¯¬´¹º»»¼½½¾ÀÜÁÂÂÃÃ÷‹›‹Œ––’—‘„# -q™œž…‹¬¬­®®ö¯°°±±²³´µ¶¶ö·¸ºº»»¼½½¾¾ã¿ÀÁÁÂÃ÷‹—“‹š›‘š{*#U›”›Ÿý ˆ¬¬þ­®®ö¯°°±±²³³´¶¶ö·¹ºº»»¼½½¾¾ÀáÁÂÂ÷Š‘‹’’˜“•™™xJK¢™¤‘$…¬¬­®é¯°°±²²³³´µ¶¶·¸¹¹º»»¼½½¾¾ÀáÁ«‰Žš—ž‘™–†T ,–¢  '«¬¬æ­®®¯°°±±²³³´µ¶¶¸¸¹¹º»»¼½½¾¾ÀáÁ÷ŠŒ™–‘“œž’•¢¤ž† /¢¨¦§‚ x©ª¬¬è­®®¯¯°±±²³³´´µ·¸¸¹¹º»»¼½½¾Àá÷—˜™Š•›™›ž£¥¡„l‚§§¨©…%*tŸ§«¬¬æ­®®¯°°±±²³³´µ¶·¸¸¹¹º»»¼½½¾¾íÀ÷˜™—‘Š–›œ•žŸ¤¤¥¥¦§§ô¨ˆ/,v¨ £«¬¬­ê®¯°°±±²³³´µµ·¸¸¹¹º»»¼½½¾ô÷–˜˜—˜šš››££ü¤¥¦§§ó:!s¨¨§¢©«¬¬®¯æ°±±²³³µµ¶·¸¸¹¹º»»¼½½¾¾÷˜—™™šö›œ™¢£¤¥¥¦§§òŒK#a¨ª¦¤§ª«¬¬ô­®®¯¯°±±²³´µµ·ø¸¹¹º»»¼½½é÷˜•—˜™˜•–š›“¢££¤¥¥¦¦’Mõ;„ ¡¬¨›Ÿ©«¬¬ô­®®¯¯°±±²´´µµÏ·¸¸¹¹º»»¼½½÷™‘—˜Œ‰‹—š—¡¢££¤¥£œ‹_&f¨§§£¨Ÿ¨©««¬¬Á­®®¯¯°±²³´´µµ¶·¸¸¹¹º»»¼½÷›••—’Š‰‰” ¡¢¢££¤¢™c _©©¥š§ª¨¦¨©ª«¬¬Á­®®¯¯°±³³´´µµ¶·¸¸¹¹º»»¼÷›š—––‘’œŸ ¡›ž£¤¤ ‰e©¥ž «©¤Ÿ¦ª«¬¬ß­®®¯¯°²³³´´µµ¶·¸¸¹¹º»»÷››•”–—žŸŸä›œ•”££–K¦¦Ÿ¡§§œ¨¬©£¥©««¬¬­Ø®¯°±²³³´´µµ¶·¸¸¹¹º»÷›š“––‘–›˜ŸŸœ–š™™œ¢žíF§¥ š˜¥£¦««ª§§©ª«¬¬­Ã®°±±²³³´´µµ¶··¸¹¹º÷™•’‰Œ’žš”œ’™——š™˜k§§¦£ £¡•§«§›¢©ª«¬¬Ú­®¯°±±²³³´´µµ¶·¸¸¹¹÷Š†“•“œ•˜‘‹Žýh¦§§ñ¤Ÿ ©¨§¨¬¨¦§©««¬¬Ü­®¯°±±²³³´´µµ¶··¸¹÷……‘–˜š›Ž–’‹Š‰‰ú f›¤¦§§Á¥Ÿ˜¦§£ž¤©§ž¢©ª«¬¬­®¯¯°±±²³³´´µµ¶··¸÷ƒƒ„„“”•’’X& tš—œ¦§§Ñ¡Ÿ©©¢ ¥œ›©©ªª¬¬­®¯¯°±±²³³´´µµ¶··÷„ƒƒ„‰Ž”••G>$Ôwšœœ¤¦¦§§¥ ž§¨¥£¡ž˜Ÿ¦©ªª¬­®®¯¯°±±²²³´´µµø·÷?<==>CCê) q“˜œœ›–›¥¦§§ê¦ œ¨¦œ•–™¡©©ª«¬­®®¯¯°±±ö²³´´µµ¶÷å Olˆ‹Š”œ˜—Ÿ¥¦§§Þ¥˜¥¨¨£¡›¨©©ª«¬­®®¯¯°±±²²³´´µµ÷ó  Jr“‰‰›Š‹‹Œ“šžœ¢¥§§¢Ÿ¡¦©©œ—›¨¨©ª««¬­­®¯¯°±±²²³´´µ÷ TUXdƒ•—’ˆ‰‹Š‹‹Œ“š˜˜¥§¦¢™“¢¡—™¦¨¨©ª««¬­­®¯¯°±±í²³´´÷[][SQOSZ{‘““”••Î‰‹‘˜•Ž‹‹•šžŸ  ŸŸ ”Ÿšš ˜›¤§¨¨©ª««¬­­®¯¯°±±²²³³÷ŽŽü‘’’“Ì”••––—˜˜•’Ž‹’””“–¤¦œ”›Ÿ£¦§¨©ªª««¬­­®¯¯°±±²²³÷Ž‘’“Ò”••––—˜™—’Ž‹‹Œ’ž ›“¢– –œ£¦§¨©ªª««¬­­®¯¯°±±½²÷‹‹ŒŽŽ‘‘’’““”••––—™™š™–“‘’Ž— ¡žž˜˜Ÿ¥¦¦§¨©ªª««¬­­®¯¯°±±²÷‹‹÷ŒŽ‘‘÷’““”•––—™™š€œ›œ‘‘“——š›œž ¢¢¤¦§¨¨§£ª««¬­­®¯¯°±±÷ŠŠ‹‹ŒŽ‘‘’““”••––—˜™™šš››–™Ž•™˜’‘‘’“””“”•–—˜˜ªª««¬­­®¯¯°±÷‰‰Š‹‹ŒŽ‘‘’““”••––—˜™™šš›š›˜— Ÿ–•–›£¥¥¤¥¦§§¨¨©ªª««­ö®¯¯°÷ˆ‰‰Š‹‹ýŒ‘æ’““”••––—˜˜™šš››œžžŸŸ ¡¢¢É£¤¥¦§§¨¨©ªª««¬­­®¯¯÷ˆˆ‰‰Š‹‹ŒŒŽ‘‘’““”••––—˜™™šš››œžüŸ ¡¢¢æ£¤¥¦§§¨¨©ªª««¬­­®¯÷‡‡ˆ‰‰Š‹‹ýŒ‘î’““”••––—˜™™šš››œûžŸ  ¢¢­£¤¥¥¦§§¨¨©©ª««¬­­®÷‡‡ˆ‰‰Š‹‹ŒŒŽŽ‘‘’““”••––—˜˜™šš››œžžŸ  ¡¢¢££¤¥¥¦§§¨¨©ªª«¬¬­­®þýõþýþýýþýþýþýýþýøþýýþýýþýýþýþýýþýýõþýýþý÷þþýþýýúþýýþþýýþþýýþýýþýþþýþýúþýþþýþþýýþýýîþýýþý÷ýþþýýþýþýýþýýþþýýþþýýþþýýþúýþþýþýýýþýþþýýþýýøþýýþý÷ýþþýôþýþýýþþýýþþýýþþýýþþýýùþýþýþýþþýýþýýòþýýþý÷ýýþþýýþýýüþýþýýþþýýüþýþýýüþýýþþþýþþýýþýýùþýýþý÷ýýþþýýøþýþýýþýþþýýþýýûþýþýþþýýþýýïþýýþý÷ýýþþýýþýýþýýþýþþýýþýþýþýýþýýðþýýþý÷ýýþýýþýþþý ýþüýþþýýþýþýþþýýþýýþýýõþýýþý÷ýþýýþþýþþýýþýýþýýþþýýþýþýþýýþýýùþýýþý÷þþ÷ýþýþþýþþýýþ ýþýøþýþýþþýþþýýþýýíþýýþý÷þýýþýþýýþýýþýýþýþüýþþýýýþýþþýýþýýùþýýþý÷þþýþýþþýýþþýýþþýýüþýþýýþþýýûþýþýþþýýþýýøþýýþý÷þýýþþýýúþýýþþýýþþýýõþýýþþýþþýþýýþýýþýýùþýýþý÷ýýþþýýþýþþýýþþý ýûþýýþýý þýýþýýôþýýþý÷ýþýþþýýþþýýþýþüýþþýýùþýþþýýþþûýþþýþþìýþþýýþýþþýþþýþ÷ýþýþýýþ ýþþýýþþýýþýøþýýþýþýþ þûýþýýþþû÷þýþýýþýõþýýþýýþýþþýýþþýþþýüþýýþþþýþþûýþ÷þýýýþýþþþýþþýþýþþýþþüýþýþþýùþýþþýýþþþýþþüýþ÷ýýþýþ ýþþýýúþýþýýþþýþþýþþþýþþøýþ÷þþýýþþýþþýýþþýýþýþýþýþþýþþôýþþ÷þýþýýþýþþýþþýýþûýþþýþþýýþýýüþýýþþþýþþøýþþýþþýþþûýþþ÷ýýþýýþýýþýýþýýþþýýþüýþýþþôýþýþþýþýþý÷ýýþþýýûþýýþý ýûþýýþýýþýùþýýþþýþþóýþþýþýþýþ÷ýþýýûþýýþýýþþýýûþýýþýýþýþý þýþý÷þýýûþýþþýýþþýýþþýýüþýþýýþûýþýýþþýþþýþþþýþþþýþþúýþþ÷þýýþþýýõþýþýýþþýýþýýþýþýþþýýþþýþþþýþþù÷þþýýþýýþþýýúþýýþþýýþýþþýýþþýþþýþù÷þþýýþý ýýþýþþýþþýýþþýýþøýþþýýþþýýùþýýþ÷þý ýþþýýþýþýþýþýþúýþþýýþþü÷þþýýúþýýþþýýþþýýþþýýþýþþýýþþýýþûýþþýþþùýþþ÷þþýýþ ýþþýýþýýþýýüþýýþþýþú÷ýþýþýýþþýýþþýýþþýýüþýþýýüþýýþþýþþýþ þþ«ýýþþýýþýþþýýþþýýøþýþýþýýþþþýþþþýþþþýþþý÷þýýþýþýûþýýþýýþüýþýþþýøþýþþýþýþþýþöýþýýþ÷ýýþýýöþýýþýýþýþýýþþýýüþýþýýüþýþýýøþýýþþýýþþýþûýþýýþþùýþ÷ýýþýýþýþýþýþýþþýþþþýþþýíþýþþýþþýþþýþýþý÷ýþýýþýòþýþýýþýþýþýýþýýþþýþþýøþýýþýþþýýþýôþýþýþýþþ÷ýþýýûþýýþýýþþýýþþýýþýþþýýþûýþýýþþùýþþýþýþþüý÷þýýúþýýþþý ýþýýþýýþýýþýýüþýýþþýýþýýþþýþþû÷ýþýþþýþýþþýýþþýþþýþýþýþõýþýþþýþþýýþþýûþ÷ýýþþýþþý ýþþýýýþýþþþýþþýýþýýþþýþþþýþþþýþþýþü÷ýýþþ ýþþýýùþýýþýýþþþýþþþýþþýþýþýýþýýøþýþýþþ÷ýýþýýþýýþþý ýþüýþýþþýüþýþýýþýûþýþþýýþûýþþ÷þþýûþýýþý ýüþýþýýþýþþýýûþýþýþþýþþýþþüý÷þýýþ ýùþýþýþýþþýþýûþýýþýýþþýþþþýþþþ÷ýýþþýýþþýýýþýþþýýþýþþýþýûþýþþýýþþýþþõýþýýþþýþý÷ýýþþýýþýþýþþýýþ÷ýþþýþþýýþþ÷ýþ÷ýýþýþýýþþý ýþþýýþùýþýþýþýýþüýþþýýýþýþþýûþýþýþþû÷ýýþýýþþýýþýþýþþýýþýýþýþþøýþþýþþýþþþ÷ýýûþýýþýýþþýýþýþüýþýþþóýþýýþýýþþýþýþþùýþþýþþýýþú÷þþýþýýüþýþýýþüýþýþþýþþýýþýþýûþýþýþþöýþýþýýþþ÷ýýþþýýþþýýþýþýþýûþýþþýýþþýþþüýþ÷ýýþþýýþþýýüþýýþþýùþýýþýþýýþýþþýþ þùýþþýþ÷ýýþýüþýýþþý þýþþýýüþýýþþýþùýþýþýýþþüýþ÷ýýüþýþýýþþýýþþýþþþýþþýúþýþýýþþýþýþþýþþúýþ÷ýþýýþýûþýýþýýýþýþþûýþþýþþüýþþýýþþýþþþýþþûýþ÷þý ýþþýýþþýýþýýþýýþýôþýþýþþýýþþýþþôýþþýþþýþýþ÷ý ýþýüþýýþþüýþþýýõþýþþýýþýþþýýþûýþþýþþúý÷þýþýýûþýýþýýúþýýþþýýþþýýþþýþþýþþýþþþýþþþ÷ýýþþýýûþýþþýýþýþýþýþýû÷ýþþýýþþýýþþýýþúýþýþþýýþüýþýþþþýþþýþûýþþýþþþýþþü÷ýþýýúþýýþþýýúþýýþþýýþýþþýþþýþþýþþþýþþýý÷ý ýþþýþþýþýþþýýþýþþýýýþýþþýþþýþþýûþýþýþþþ÷þ>þ@@vigor-0.016.orig/vigor/v2cp0004.xbm0100664000076400007640000003115707103707233015315 0ustar cjw44cjw44/* Vigor morphing */ #define v2cp0004_width 128 #define v2cp0004_height 128 static char v2cp0004_bits[] = { 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x29, 0x55, 0x55, 0x55, 0x55, 0x55, 0x49, 0x92, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x24, 0x22, 0x00, 0x00, 0x00, 0x04, 0x00, 0x02, 0x92, 0x24, 0x02, 0x00, 0x00, 0x00, 0x00, 0x94, 0x44, 0x44, 0x55, 0x55, 0x92, 0x90, 0x24, 0x20, 0x00, 0x00, 0x90, 0x08, 0x00, 0x00, 0x00, 0x22, 0x92, 0x08, 0x00, 0x00, 0x01, 0x42, 0x80, 0x84, 0x24, 0x20, 0x00, 0x40, 0x00, 0x00, 0x00, 0x4a, 0x24, 0xa9, 0xaa, 0x2a, 0x54, 0x08, 0x12, 0x08, 0x80, 0x44, 0x02, 0x00, 0x24, 0x00, 0x00, 0x90, 0x88, 0x04, 0x01, 0x80, 0x00, 0xa1, 0x80, 0x40, 0x08, 0x00, 0x48, 0x04, 0x00, 0x00, 0x00, 0x92, 0x92, 0x50, 0x54, 0x15, 0x29, 0x04, 0x12, 0x09, 0x21, 0x89, 0x00, 0x40, 0x40, 0x04, 0x00, 0x4a, 0x24, 0x85, 0x02, 0x20, 0x82, 0x90, 0x00, 0x04, 0x08, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x90, 0x44, 0x28, 0x54, 0x45, 0x10, 0x02, 0xa4, 0x20, 0x41, 0x22, 0x08, 0x04, 0x01, 0x40, 0x00, 0x25, 0x29, 0x45, 0x01, 0x88, 0xa2, 0xa8, 0x48, 0x0a, 0x04, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x22, 0x11, 0x54, 0x11, 0x04, 0x81, 0xfa, 0xbf, 0x20, 0x01, 0x82, 0x20, 0x44, 0x04, 0x00, 0x92, 0x44, 0xa4, 0x02, 0xa2, 0x48, 0xd4, 0xff, 0xff, 0x0b, 0x90, 0x08, 0x04, 0x00, 0x00, 0x01, 0x24, 0x49, 0x09, 0x54, 0x0a, 0x09, 0xf4, 0xff, 0xff, 0x5f, 0x02, 0x10, 0x80, 0x00, 0x00, 0x00, 0x92, 0x24, 0x52, 0x91, 0x20, 0xa0, 0xfe, 0xaf, 0xea, 0x7f, 0x90, 0x80, 0x00, 0x44, 0x08, 0x00, 0x24, 0x49, 0x22, 0x12, 0xa5, 0x0a, 0x7f, 0x04, 0xa8, 0xfe, 0x81, 0x04, 0x12, 0x00, 0x00, 0x04, 0x49, 0x22, 0x49, 0x41, 0x10, 0xd0, 0x9b, 0xa8, 0x04, 0xfd, 0x2b, 0x12, 0x00, 0x00, 0x41, 0x00, 0x92, 0x24, 0x09, 0x15, 0x45, 0xc5, 0x17, 0x81, 0x28, 0xd0, 0x43, 0x40, 0x40, 0x12, 0x00, 0x00, 0x24, 0x49, 0x52, 0x48, 0x10, 0xf1, 0x4b, 0x24, 0x42, 0xe2, 0x07, 0x11, 0x09, 0x00, 0x08, 0x00, 0x49, 0x4a, 0x84, 0x92, 0x52, 0xe2, 0x8b, 0x44, 0x48, 0x88, 0x2f, 0x00, 0x00, 0x00, 0x00, 0x04, 0x92, 0x90, 0x52, 0x48, 0x84, 0xf4, 0x10, 0x11, 0x81, 0xa2, 0x9f, 0x22, 0x90, 0x48, 0x40, 0x00, 0x2a, 0x95, 0x88, 0x12, 0x11, 0xf9, 0x25, 0x22, 0x15, 0x04, 0x1e, 0x84, 0x02, 0x00, 0x01, 0x00, 0xa4, 0x20, 0x25, 0x44, 0x4a, 0x7a, 0x90, 0x44, 0x48, 0x50, 0xbf, 0x20, 0x00, 0x01, 0x08, 0x08, 0x25, 0x2b, 0x49, 0x91, 0x48, 0xfa, 0x92, 0x14, 0x41, 0x05, 0x3c, 0x04, 0x24, 0x10, 0x80, 0x00, 0x48, 0x44, 0x92, 0x24, 0x22, 0x3d, 0x42, 0xa0, 0x14, 0x52, 0x78, 0x51, 0x01, 0x82, 0x00, 0x00, 0x92, 0x94, 0x24, 0xa5, 0x24, 0x7d, 0x14, 0x05, 0x51, 0x84, 0x3a, 0x02, 0x12, 0x00, 0x08, 0x00, 0xaa, 0x22, 0x49, 0x08, 0x49, 0x3e, 0xa1, 0xa8, 0x84, 0x10, 0x7c, 0x08, 0x40, 0x08, 0x80, 0x04, 0x24, 0x2a, 0x49, 0x29, 0x11, 0x5e, 0x8a, 0x02, 0x91, 0xa2, 0x70, 0xa1, 0x84, 0x20, 0x01, 0x00, 0x49, 0xa1, 0x24, 0x21, 0x4a, 0x9f, 0x50, 0x54, 0x24, 0x04, 0x7d, 0x04, 0x10, 0x00, 0x08, 0x08, 0x52, 0x8a, 0x24, 0xa5, 0x28, 0x3e, 0x85, 0x44, 0x89, 0x54, 0xf8, 0xa9, 0x82, 0x04, 0x40, 0x00, 0x8a, 0x52, 0x92, 0x04, 0xa1, 0x4f, 0x29, 0x11, 0x52, 0x82, 0xf2, 0x00, 0x08, 0x90, 0x00, 0x00, 0xa9, 0x94, 0x92, 0x54, 0x0a, 0x4f, 0x22, 0xa5, 0x84, 0x28, 0xf0, 0x2a, 0x81, 0x00, 0x08, 0x11, 0x12, 0x21, 0x24, 0x49, 0xa9, 0x9f, 0x94, 0x08, 0x29, 0x45, 0xf5, 0x00, 0x14, 0x12, 0x01, 0x00, 0xa5, 0x56, 0x49, 0x12, 0x24, 0x2f, 0x91, 0xb2, 0x4a, 0x10, 0xf1, 0xaa, 0x00, 0x00, 0x20, 0x02, 0x2a, 0x91, 0x92, 0xa4, 0x92, 0x9f, 0x24, 0xed, 0x5f, 0x45, 0xfa, 0x00, 0x92, 0x10, 0x01, 0x10, 0x24, 0xa5, 0x94, 0x94, 0x24, 0xaf, 0x2a, 0xfd, 0x7f, 0x49, 0xf0, 0x55, 0x00, 0x02, 0x24, 0x00, 0xa9, 0x14, 0x51, 0x22, 0x49, 0x1f, 0x91, 0xff, 0xff, 0x25, 0xf5, 0x00, 0x25, 0x10, 0x00, 0x01, 0x92, 0x52, 0x85, 0x24, 0x49, 0x3f, 0xd5, 0xff, 0xff, 0x4b, 0xf4, 0x29, 0x04, 0x21, 0x01, 0x10, 0x25, 0x49, 0x2a, 0x49, 0x92, 0x4f, 0xf2, 0x2f, 0xf8, 0x17, 0xf9, 0x80, 0x20, 0x04, 0x24, 0x02, 0x54, 0x52, 0x52, 0x92, 0x2a, 0xbf, 0xe4, 0x4b, 0xc2, 0x2f, 0xf1, 0x15, 0x04, 0x20, 0x00, 0x00, 0xa5, 0x8a, 0xa4, 0x24, 0x44, 0x9f, 0xfa, 0x89, 0x94, 0x4f, 0xfa, 0xa0, 0x50, 0x84, 0x40, 0x08, 0x4a, 0x52, 0x09, 0x55, 0x55, 0x9f, 0x70, 0x29, 0x91, 0x5e, 0xf8, 0x05, 0x82, 0x00, 0x09, 0x00, 0xaa, 0x94, 0xaa, 0x48, 0x88, 0x5f, 0x7a, 0xa5, 0x24, 0x1f, 0xf5, 0xa8, 0x10, 0x24, 0x80, 0x10, 0x49, 0x25, 0xa2, 0x92, 0x29, 0x5f, 0xf9, 0x24, 0x49, 0x3c, 0xf8, 0x01, 0x82, 0x00, 0x10, 0x02, 0x92, 0x54, 0x15, 0x25, 0xa2, 0x9f, 0x5e, 0x49, 0x12, 0xfd, 0xfd, 0xaa, 0x10, 0x22, 0x01, 0x20, 0x55, 0x49, 0x52, 0xa8, 0x0a, 0xbf, 0xf7, 0x93, 0x52, 0xde, 0xf9, 0x01, 0x22, 0x04, 0x84, 0x00, 0x2a, 0x95, 0xa4, 0xa2, 0x54, 0xdf, 0x03, 0x27, 0x8a, 0xa3, 0xff, 0x94, 0x00, 0x20, 0x11, 0x02, 0x49, 0xa9, 0x2a, 0x15, 0x49, 0xff, 0x00, 0xac, 0xd0, 0x03, 0xfc, 0x11, 0xa4, 0x04, 0x00, 0x10, 0xaa, 0x92, 0x44, 0xa2, 0x92, 0x3f, 0x00, 0x14, 0x65, 0x00, 0xfe, 0x42, 0x02, 0x10, 0x91, 0x00, 0x29, 0x2a, 0xa9, 0x4c, 0x2a, 0x1f, 0x00, 0x38, 0x60, 0x00, 0xf0, 0x49, 0x90, 0x22, 0x02, 0x12, 0xca, 0x52, 0x95, 0x92, 0x92, 0x1f, 0x50, 0xa8, 0x77, 0x7c, 0xf0, 0x02, 0x05, 0x00, 0x10, 0x00, 0x95, 0x94, 0xa4, 0xa4, 0x24, 0x0f, 0xfc, 0xb0, 0x35, 0xec, 0xf0, 0x29, 0x20, 0x49, 0x82, 0x10, 0xaa, 0x52, 0x49, 0x4a, 0xbf, 0x0f, 0x7e, 0x7a, 0x3a, 0xfe, 0xe0, 0xfc, 0x0a, 0x00, 0x10, 0x02, 0x24, 0x25, 0x95, 0x14, 0x6e, 0x17, 0xf6, 0x70, 0x3a, 0xdc, 0xe0, 0xad, 0x21, 0x25, 0x21, 0x10, 0x55, 0x55, 0xa9, 0x52, 0xd3, 0x07, 0xfe, 0xb0, 0x34, 0xfe, 0xe0, 0x47, 0x09, 0x10, 0x04, 0x02, 0x55, 0x49, 0x4a, 0x52, 0xa4, 0x07, 0xfc, 0x30, 0x31, 0xfc, 0xe0, 0x0a, 0x41, 0x42, 0x40, 0x10, 0x92, 0xaa, 0x92, 0x4a, 0x95, 0x46, 0x76, 0x78, 0x7a, 0x74, 0xe0, 0x50, 0x14, 0x10, 0x09, 0x04, 0x55, 0xaa, 0x54, 0x52, 0x52, 0x07, 0x08, 0xb0, 0x62, 0x00, 0xf0, 0x83, 0x80, 0x02, 0x80, 0x10, 0xaa, 0x92, 0x4a, 0x95, 0xa4, 0x0f, 0x40, 0x9c, 0xf4, 0x00, 0xfc, 0x28, 0x2a, 0x28, 0x29, 0x00, 0x4a, 0xa5, 0x52, 0x52, 0x15, 0x2f, 0x00, 0xb8, 0xc2, 0x01, 0xfc, 0x45, 0x00, 0x01, 0x00, 0x22, 0x52, 0x2a, 0x95, 0x94, 0xa4, 0x3f, 0x81, 0x0e, 0xa9, 0xcb, 0xff, 0x88, 0x52, 0xa4, 0x22, 0x08, 0x55, 0x55, 0x52, 0x25, 0x29, 0xff, 0x8a, 0x57, 0x25, 0xff, 0xff, 0x11, 0x02, 0x00, 0x84, 0x00, 0xaa, 0xa4, 0x4a, 0xaa, 0x4a, 0xff, 0xff, 0x2b, 0x4a, 0x7d, 0xfa, 0x4a, 0xa8, 0x4a, 0x10, 0x12, 0xaa, 0xaa, 0xaa, 0x28, 0x55, 0xdf, 0xfe, 0x49, 0x29, 0x7d, 0xfa, 0x08, 0x01, 0x00, 0x42, 0x20, 0x49, 0x95, 0x94, 0x52, 0x49, 0x3f, 0x3d, 0x52, 0x92, 0xba, 0xfc, 0xa1, 0x94, 0x54, 0x08, 0x02, 0x55, 0xa5, 0x52, 0xa5, 0x2a, 0x7f, 0x7d, 0x55, 0xa5, 0x7c, 0xf9, 0x0a, 0x80, 0x00, 0x41, 0x10, 0x2a, 0x99, 0x94, 0x4a, 0x52, 0x9f, 0x7c, 0x25, 0x49, 0x3d, 0xfa, 0xa1, 0x2a, 0x12, 0x14, 0x41, 0x55, 0xa5, 0xaa, 0x94, 0x4a, 0x5f, 0x7d, 0x49, 0x15, 0xf9, 0xf8, 0x0a, 0x00, 0xa2, 0x00, 0x04, 0xaa, 0xaa, 0x92, 0xaa, 0x94, 0xbf, 0x3e, 0x55, 0xaa, 0x7c, 0xfa, 0xa1, 0xaa, 0x08, 0x52, 0x02, 0xaa, 0xaa, 0xaa, 0x24, 0x29, 0xbe, 0x78, 0x95, 0x22, 0xf9, 0xf8, 0x15, 0x00, 0x41, 0x00, 0x28, 0x55, 0x95, 0x52, 0xa9, 0xaa, 0x4f, 0x3f, 0x29, 0x55, 0x7d, 0xfa, 0xa2, 0x2a, 0x14, 0x25, 0x01, 0x25, 0x29, 0x95, 0x4a, 0x4a, 0x5f, 0x7c, 0xa5, 0x24, 0x79, 0xf2, 0x09, 0x80, 0x20, 0x04, 0x12, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0x5f, 0x37, 0x29, 0x55, 0x7a, 0xfc, 0xa5, 0x2a, 0x82, 0x50, 0x40, 0x55, 0x55, 0x49, 0x92, 0x49, 0x5f, 0x7e, 0xaa, 0x92, 0x7a, 0xf1, 0x09, 0x40, 0x14, 0x02, 0x09, 0xaa, 0xaa, 0xaa, 0x2a, 0xaa, 0x5f, 0x9f, 0x90, 0x54, 0x7a, 0xfa, 0xa5, 0x0a, 0x41, 0x48, 0x00, 0x55, 0x95, 0xaa, 0xd4, 0x2a, 0x5f, 0xbc, 0x52, 0xa5, 0xf4, 0xf2, 0x09, 0x50, 0x14, 0x09, 0x2a, 0xaa, 0xaa, 0x52, 0x25, 0xc9, 0x5f, 0x3f, 0x05, 0x09, 0x7a, 0xf4, 0xa5, 0x02, 0x41, 0xa0, 0x00, 0x55, 0xa9, 0x4a, 0x55, 0x15, 0xbf, 0x5e, 0x28, 0xa9, 0xf0, 0xf4, 0x21, 0x54, 0x14, 0x05, 0x24, 0xaa, 0x2a, 0x55, 0x2a, 0xa9, 0x4f, 0xbf, 0x2a, 0x22, 0x7d, 0xf9, 0x95, 0x02, 0x41, 0x90, 0x00, 0xaa, 0xaa, 0xaa, 0xa4, 0x2a, 0x5f, 0x3e, 0x49, 0x4a, 0xf2, 0xf2, 0x23, 0x28, 0x4a, 0x12, 0x29, 0x55, 0x55, 0x55, 0x55, 0x49, 0x5f, 0x9f, 0x52, 0x91, 0x7c, 0xf5, 0x89, 0x42, 0x00, 0x41, 0x04, 0x55, 0x55, 0xa5, 0x2a, 0x55, 0xbf, 0x3e, 0x55, 0x95, 0xf0, 0xf4, 0x23, 0x94, 0x2a, 0x88, 0x10, 0xaa, 0xaa, 0xaa, 0xa4, 0xaa, 0x4f, 0x5f, 0x02, 0x22, 0xfd, 0xfa, 0x49, 0x41, 0x40, 0x05, 0x42, 0xaa, 0xaa, 0xaa, 0xaa, 0x12, 0x5f, 0xbe, 0xaa, 0x54, 0xf0, 0xe1, 0x13, 0x15, 0x15, 0x50, 0x08, 0x55, 0x95, 0xaa, 0x2a, 0x55, 0x5f, 0x5f, 0x52, 0x42, 0x7d, 0xfa, 0x49, 0xa0, 0x40, 0x05, 0x21, 0xaa, 0xaa, 0xaa, 0xaa, 0x54, 0xaf, 0xbe, 0x8a, 0x2c, 0xf5, 0xf2, 0x93, 0x0a, 0x15, 0x50, 0x04, 0x55, 0x55, 0x49, 0xa9, 0xaa, 0x5f, 0x4f, 0xb5, 0x52, 0xfa, 0xea, 0x42, 0x50, 0xa0, 0x02, 0x11, 0xaa, 0xaa, 0xaa, 0x4a, 0x25, 0x5f, 0x5f, 0x45, 0xa5, 0xf4, 0xf4, 0x4b, 0x05, 0x05, 0x28, 0x22, 0x55, 0x55, 0x55, 0x55, 0xaa, 0xaf, 0xaf, 0xb4, 0xaa, 0xfa, 0xe9, 0x11, 0x52, 0x54, 0x85, 0x08, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x2f, 0xaf, 0x4a, 0xaa, 0xf4, 0xf5, 0xa5, 0x44, 0x01, 0x10, 0x21, 0x55, 0x55, 0x55, 0x55, 0xa9, 0x5f, 0xaf, 0xaa, 0x92, 0xfa, 0xf4, 0x09, 0x12, 0x54, 0x45, 0x04, 0x55, 0x55, 0x55, 0xa9, 0x4a, 0x5e, 0xaf, 0xaa, 0xaa, 0xf2, 0xe5, 0xab, 0x44, 0x11, 0x88, 0x28, 0x55, 0x55, 0x95, 0xaa, 0xaa, 0xaf, 0x2f, 0x29, 0x15, 0xf5, 0xf4, 0x21, 0x12, 0x4a, 0x11, 0x01, 0x56, 0x55, 0x55, 0x95, 0x2a, 0x5f, 0xaf, 0x52, 0xa9, 0xf4, 0xe5, 0xa7, 0xa4, 0x10, 0x22, 0x2a, 0xb5, 0xaa, 0xaa, 0xaa, 0x54, 0x97, 0xaf, 0xaa, 0x2a, 0xf5, 0xf4, 0x11, 0x49, 0xa2, 0x44, 0x00, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x3e, 0x5f, 0x95, 0xa4, 0xea, 0xc5, 0x25, 0x49, 0x8a, 0x88, 0x2a, 0x55, 0x55, 0x55, 0x55, 0x55, 0x4f, 0x57, 0x52, 0x55, 0xea, 0xf8, 0x45, 0x84, 0x10, 0x25, 0x40, 0xb5, 0x55, 0x55, 0x55, 0xa5, 0x5e, 0xaf, 0x4a, 0x49, 0xc9, 0xe2, 0x95, 0x94, 0x52, 0x88, 0x0a, 0x55, 0xad, 0xaa, 0xaa, 0xaa, 0xa6, 0xa7, 0x94, 0x92, 0x64, 0xe9, 0x25, 0x11, 0x04, 0x21, 0x10, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x56, 0x97, 0x52, 0x35, 0x09, 0xea, 0x4b, 0x52, 0x29, 0xa5, 0x22, 0x5a, 0x55, 0x55, 0x55, 0x55, 0xa9, 0xaf, 0x94, 0x44, 0x55, 0xd1, 0x91, 0x44, 0x44, 0x08, 0x04, 0xd5, 0x6a, 0x55, 0x55, 0x95, 0x2a, 0xaf, 0x92, 0xaa, 0x24, 0xd5, 0xa7, 0x94, 0x94, 0x52, 0x29, 0x55, 0xad, 0xaa, 0x2a, 0x55, 0xa5, 0x2f, 0x55, 0x92, 0x92, 0xf8, 0x12, 0x21, 0x21, 0x08, 0x44, 0xad, 0xaa, 0x55, 0x55, 0x55, 0x55, 0x5e, 0x49, 0xa5, 0xa4, 0xe2, 0x52, 0x25, 0xa5, 0xa2, 0x08, 0xb5, 0x55, 0x55, 0x55, 0x55, 0x95, 0x2f, 0x92, 0x54, 0x15, 0xfd, 0x09, 0x49, 0x04, 0x89, 0x22, 0x55, 0x55, 0xad, 0xaa, 0xaa, 0x52, 0xde, 0x2a, 0x95, 0x52, 0xf0, 0x53, 0x4a, 0x29, 0x29, 0x08, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x3e, 0x55, 0x52, 0xa4, 0xba, 0x94, 0x08, 0x92, 0x84, 0x52, 0x5b, 0x6d, 0x55, 0x55, 0x55, 0x95, 0x7e, 0xc9, 0x54, 0x95, 0xfa, 0x24, 0x69, 0x92, 0x28, 0x02, 0x6a, 0x55, 0xb5, 0xaa, 0xaa, 0xa4, 0x5d, 0x52, 0xa5, 0x24, 0x7d, 0xa9, 0x92, 0x44, 0x42, 0x54, 0x56, 0x55, 0xab, 0xaa, 0xaa, 0xaa, 0xfa, 0x55, 0x2a, 0x55, 0x7f, 0x49, 0x24, 0x49, 0x4a, 0x01, 0xd5, 0xb6, 0xaa, 0xaa, 0xaa, 0xaa, 0xfe, 0x93, 0x4a, 0xa9, 0x1f, 0xa5, 0x92, 0x24, 0x11, 0x2a, 0x5b, 0x55, 0xd5, 0xaa, 0x56, 0x55, 0xf1, 0xaf, 0x2a, 0xf5, 0xbf, 0x88, 0xa4, 0x24, 0x52, 0x22, 0xaa, 0x6a, 0xab, 0xd6, 0xaa, 0xaa, 0xee, 0x7f, 0x55, 0xfd, 0x43, 0x25, 0x49, 0x49, 0x89, 0x08, 0xed, 0x56, 0xad, 0xaa, 0x5a, 0x55, 0xa9, 0xff, 0xf7, 0xff, 0x1f, 0x49, 0x4a, 0x12, 0x22, 0x29, 0x55, 0x55, 0x55, 0x55, 0xab, 0xaa, 0xea, 0xfe, 0xff, 0xff, 0x62, 0x2a, 0x91, 0x4a, 0x49, 0x42, 0x5b, 0xdb, 0xda, 0x5a, 0xb5, 0x55, 0x95, 0xda, 0xff, 0x7f, 0x4d, 0x49, 0x95, 0x28, 0x49, 0x14, 0xd6, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xba, 0xff, 0x45, 0xa9, 0x12, 0x52, 0x45, 0x92, 0x20, 0xb5, 0x5a, 0xab, 0x55, 0x55, 0xab, 0xaa, 0x22, 0x55, 0x59, 0xaa, 0xaa, 0x8a, 0x94, 0x24, 0x25, 0xad, 0xd5, 0x5a, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xa2, 0x92, 0x2a, 0x51, 0x22, 0x91, 0x04, 0x6a, 0xad, 0xaa, 0x6a, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0x96, 0xa4, 0x54, 0x95, 0x24, 0x25, 0x29, 0xad, 0x55, 0x5b, 0x55, 0x55, 0x55, 0x55, 0x55, 0x2a, 0xa9, 0x4a, 0x29, 0xa9, 0x4a, 0x44, 0x12, 0x5b, 0x6d, 0xd5, 0x56, 0x55, 0x55, 0x95, 0xaa, 0x52, 0xa5, 0x2a, 0xa5, 0x4a, 0x92, 0x94, 0x24, 0x6a, 0x5b, 0xb5, 0xaa, 0xb6, 0xaa, 0xaa, 0x52, 0x55, 0x4a, 0x52, 0x4a, 0x52, 0x55, 0x49, 0x12, 0x5b, 0xd5, 0x56, 0xb5, 0xaa, 0xaa, 0xaa, 0xaa, 0x4a, 0x95, 0x4a, 0xa9, 0x94, 0x44, 0x92, 0x24, 0xd6, 0x5a, 0xb5, 0xad, 0xaa, 0xaa, 0xaa, 0x4a, 0x55, 0xaa, 0x54, 0x92, 0x22, 0x29, 0x49, 0x12, 0x5a, 0x6b, 0xab, 0xaa, 0xd5, 0xaa, 0xaa, 0x2a, 0xa9, 0x54, 0x49, 0x25, 0x55, 0x4a, 0x92, 0x24, 0xb5, 0x56, 0xb5, 0x5a, 0xad, 0xaa, 0xaa, 0xaa, 0xaa, 0x92, 0xaa, 0xaa, 0xa4, 0xa4, 0x24, 0x52, 0xb7, 0x6d, 0x6b, 0xab, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0x2a, 0x29, 0x29, 0x29, 0xa5, 0x04 }; vigor-0.016.orig/vigor/a2c.c0100664000076400007640000000067007103707233014234 0ustar cjw44cjw44#include int main(argc, argv) int argc; char *argv[]; { int c; int i; if (argc != 2) { fputs("Usage: a2c symbol\n", stderr); exit(1); } printf("static char %s[] = {", argv[1]); i = 0; for(;;) { if (!(i++%12)) fputs("\n ", stdout); c = getchar(); if (c == EOF) { if (feof(stdin)) break; perror("cannot read stdin"); exit(1); } printf("0x%02x, ", c); } puts("\n 0x00\n};"); exit(0); } vigor-0.016.orig/vigor/vigor.tcl0100644000076400007640000005023007103707235015252 0ustar cjw44cjw44# v_random # This was blatantly stolen from the TCL FAQ. It's renamed to prevent # name clashes. It seems to have a poor distribution, so I need to find # a better one. # Yes, TCL 8.0 has one built in. No, I don't want to require that. proc v_random {args} { global RNG_seed set max 259200 set argcnt [llength $args] if { $argcnt < 1 || $argcnt > 2 } { error "wrong # args: random limit | seed ?seedval?" } if ![string compare [lindex $args 0] seed] { if { $argcnt == 2 } { set RNG_seed [lindex $args 1] } else { set RNG_seed [expr \ ([pid]+[clock seconds])%$max] } return } if ![info exists RNG_seed] { set RNG_seed [expr ([pid]+[clock seconds])%$max] } set RNG_seed [expr ($RNG_seed*7141+54773) % $max] return [expr int(double($RNG_seed)*[lindex $args 0]/$max)] } proc vigor_dlg_setup_box {} { global vigor_pos rotate_vigor_pos vigor_animate_bg vigor_rest vigor_wav_0001 vigor_wav_0002 vigor_wav_0001 vigor_wav_0002 vigor_wav_0001 vigor_wav_0002 toplevel .dlg -class Dialog wm title .dlg "Vigor Says" wm iconname .dlg "Vigor Says" set offset 200 canvas .dlg.spkframe -width 136 -height 34 switch -- $vigor_pos { "+0+0" { .dlg.spkframe create line 0 34 51 34 .dlg.spkframe create line 51 34 34 3 .dlg.spkframe create line 34 3 68 34 .dlg.spkframe create line 68 34 102 34 pack .dlg.spkframe -side top -fill none wm geometry .dlg +0+$offset } "-0+0" { .dlg.spkframe create line 102 34 51 34 .dlg.spkframe create line 51 34 68 3 .dlg.spkframe create line 68 3 34 34 .dlg.spkframe create line 34 34 0 34 pack .dlg.spkframe -side top -fill none wm geometry .dlg -0+$offset } "+0-0" { .dlg.spkframe create line 0 0 51 0 .dlg.spkframe create line 51 0 34 30 .dlg.spkframe create line 34 30 68 0 .dlg.spkframe create line 68 0 102 0 pack .dlg.spkframe -side bottom -fill none wm geometry .dlg +0-$offset } "default" { .dlg.spkframe create line 102 0 51 0 .dlg.spkframe create line 51 0 68 30 .dlg.spkframe create line 68 30 34 0 .dlg.spkframe create line 34 0 0 0 pack .dlg.spkframe -side bottom -fill none wm geometry .dlg -0-$offset } } frame .dlg.btnframe -relief raised -bd 1 # We create the msgframe, but do not populate it. frame .dlg.msgframe pack .dlg.msgframe .dlg.btnframe -side top -fill both } proc vigor_dlg_setup { text } { vigor_dlg_setup_box message .dlg.msgframe.msg -width 3i -text $text \ -font -Adobe-Times-Medium-R-Normal-*-180-* pack .dlg.msgframe.msg -side right -expand 1 -fill both \ -padx 3m -pady 3m } proc vigor_dlg_block {} { set oldFocus [focus] grab set .dlg focus .dlg tkwait window .dlg vigor_animate_bg vigor_wav_0001 vigor_rest focus $oldFocus } proc vigor_maybe_confirm { prob text } { set val [v_random 100] if { $val > $prob } { return } vigor_dlg_setup $text button .dlg.btnframe.ok -text OK -command { destroy .dlg } button .dlg.btnframe.cancel -text Cancel -command { destroy .dlg vigor_comment "If you want to take advantage of the cancel feature, you need to upgrade to the server edition of Vigor. Contact your sales representative for information." } switch [ v_random 5 ] { "0" { pack .dlg.btnframe.cancel -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m pack .dlg.btnframe.ok -side right -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m } default { pack .dlg.btnframe.ok -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m pack .dlg.btnframe.cancel -side right -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m } } vigor_dlg_block } proc vigor_maybe_wizard { prob wizname task0 task1 task2 this_task descr } { global vigor_wizard_descr vigor_wizard_task1 vigor_wizard_task2 # viMsg 1 "$prob chance of winning" set val [v_random 100] if { $val > $prob } { return } # viMsg 1 "foo" # I have no idea how to create closures in Tcl, so we fake it with globals set vigor_wizard_descr $descr set vigor_wizard_task1 $task1 set vigor_wizard_task2 $task2 vigor_dlg_setup "It looks like you are $wizname. Which Vigor Whizzer would you like to use to help you with this?" # viMsg 1 "mane" button .dlg.btnframe.task0 -text $task0 -command { destroy .dlg vigor_comment $vigor_wizard_descr } button .dlg.btnframe.task1 -text $task1 -command { destroy .dlg vigor_comment "If you want to $vigor_wizard_task1 then you need to invoke the \"$vigor_wizard_task1\" Whizzer." } button .dlg.btnframe.task2 -text $task2 -command { destroy .dlg vigor_comment "If you want to $vigor_wizard_task2 then you need to invoke the \"$vigor_wizard_task2\" Whizzer." } button .dlg.btnframe.cancel -text "Cancel" -command { destroy .dlg vigor_comment "If you want to take advantage of the cancel feature, you need to upgrade to the server edition of Vigor. Contact your sales representative for information." vigor_comment $vigor_wizard_descr } # viMsg 1 "padme" pack .dlg.btnframe.task0 -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m pack .dlg.btnframe.task1 -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m pack .dlg.btnframe.task2 -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m # FIXME This does not seem to work right. The "Cancel" button is always # on the right. I have little concern over such things, though, when this # is now the fourth month of a weekend hack. switch [ v_random 5 ] { "0" { pack .dlg.btnframe.cancel -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m } default { pack .dlg.btnframe.cancel -side right -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m } } # viMsg 1 "hum" vigor_dlg_block } proc vigor_confirm { text } { vigor_maybe_confirm 100 $text } proc vigor_wizard { wizname task0 task1 task2 this_task descr } { # FIXME I know there's a better way. I just don't remember it now, # and really want to just finish this and get some sleep. vigor_maybe_wizard 100 $wizname $task0 $task1 $task2 $this_task $descr } proc vigor_hint { text } { vigor_confirm $text } proc vigor_comment { text } { vigor_dlg_setup $text button .dlg.btnframe.ok -text OK -command { destroy .dlg } pack .dlg.btnframe.ok -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m vigor_dlg_block } proc vigor_eula {} { vigor_dlg_setup_box text .dlg.msgframe.text -relief raised -bd 2 -yscrollcommand { # FIXME For some reason, if we rotate_vigor_pos here, # it goes hysterical. This even happens if a second's worth # of rotate's are eaten by the lag code. Does anybody know why? # rotate_vigor_pos .dlg.msgframe.text yview 0 # This comment eats the output of yscrollcommand } # text .dlg.msgframe.text -relief raised -bd 2 -yscrollcommand ".dlg.msgframe.scroll set" scrollbar .dlg.msgframe.scroll # -command ".dlg.msgframe.text yview" bind .dlg.msgframe.scroll { rotate_vigor_pos } pack .dlg.msgframe.scroll -side right -fill y pack .dlg.msgframe.text -side left .dlg.msgframe.text insert end "END-USER LICENSE AGREEMENT\n\n" .dlg.msgframe.text insert end "IMPORTANT-READ CAREFULLY: " .dlg.msgframe.text insert end "This End-User License Agreement (\"EULA\") " .dlg.msgframe.text insert end "is NOT a legal agreement between you " .dlg.msgframe.text insert end "(either an individual or a single entity, " .dlg.msgframe.text insert end "so take that Fare) and some other unnamed " .dlg.msgframe.text insert end "entity for whatever product we feel like " .dlg.msgframe.text insert end "it applies to. This includes media, " .dlg.msgframe.text insert end "printed materials, online or electronic " .dlg.msgframe.text insert end "documentation, products purchased because " .dlg.msgframe.text insert end "of or used with the product, or anything " .dlg.msgframe.text insert end "that happens to be nearby (\"SOFTWARE " .dlg.msgframe.text insert end "PRODUCT\"). By installing, copying, " .dlg.msgframe.text insert end "downloading, accessing, using, thinking " .dlg.msgframe.text insert end "about, hearing of, or being in the same " .dlg.msgframe.text insert end "universe as the SOFTWARE PRODUCT, you " .dlg.msgframe.text insert end "agree to be bound by the terms of this " .dlg.msgframe.text insert end "EULA. If you do not agree to the terms " .dlg.msgframe.text insert end "of this EULA, you can try to get your " .dlg.msgframe.text insert end "money back, but let's face it, that ain't " .dlg.msgframe.text insert end "gonna happen anyway, so why bother?\n\n" .dlg.msgframe.text insert end "SOFTWARE PRODUCT LICENSE\n\n" .dlg.msgframe.text insert end "The SOFTWARE PRODUCT is protected by " .dlg.msgframe.text insert end "copyright laws, international copyright " .dlg.msgframe.text insert end "treaties, several vaguely defined IPO " .dlg.msgframe.text insert end "laws and treaties that are easily clouded " .dlg.msgframe.text insert end "in a court of law, and a guy named " .dlg.msgframe.text insert end "Bubba with a shotgun.\n\n" # FIXME This paragraph needs some work. .dlg.msgframe.text insert end "1. GRANT OF LICENSE. This EULA grants you " .dlg.msgframe.text insert end "the following rights:\n" .dlg.msgframe.text insert end "* The right to do whatever the publisher " .dlg.msgframe.text insert end "says.\n" .dlg.msgframe.text insert end "* Nothing else.\n\n" # FIXME This paragraph needs some work too. .dlg.msgframe.text insert end "2. RESPONSIBILITIES OF THE USER. By " .dlg.msgframe.text insert end "agreeing to this license, you agree to " .dlg.msgframe.text insert end "the following:\n" # This is where it cuts off on a 1024x768 display. .dlg.msgframe.text insert end "* Give the provider your firstborn son, " .dlg.msgframe.text insert end "should the provider deem such is " .dlg.msgframe.text insert end "necessary and valuable.\n" .dlg.msgframe.text insert end "* Become Bill's towel boy for life.\n" .dlg.msgframe.text insert end "* Whatever else we think of later on, " .dlg.msgframe.text insert end "you already agreed to from the shrink-wrap " .dlg.msgframe.text insert end "license anyway\n\n" .dlg.msgframe.text insert end "THIS TECHNOLOGY IS NOT FAULT TOLERANT AND " .dlg.msgframe.text insert end "IS NOT DESIGNED, MANUFACTURED, OR INTENDED " .dlg.msgframe.text insert end "FOR USE OR RESALE AS ON-LINE CONTROL " .dlg.msgframe.text insert end "EQUIPMENT IN HAZARDOUS ENVIRONMENTS " .dlg.msgframe.text insert end "REQUIRING FAIL-SAFE PERFORMANCE, SUCH AS " .dlg.msgframe.text insert end "THE OPERATION OF NUCLEAR FACILITIES, " .dlg.msgframe.text insert end "AIRCRAFT NAVIGATION OR COMMUNICATIONS " .dlg.msgframe.text insert end "SYSTEMS, AIR TRAFFIC CONTROL, DIRECT LIFE " .dlg.msgframe.text insert end "SUPPORT MACHINES, WEAPONS SYSTEMS, " .dlg.msgframe.text insert end "INTERNET SERVICE PROVIDERS, TECHNICAL " .dlg.msgframe.text insert end "SUPPORT LINES, NETWORK OPERATIONS CENTERS, " .dlg.msgframe.text insert end "IN WHICH THE FAILURE OF THE TECHNOLOGY " .dlg.msgframe.text insert end "OR NORMAL DAY-TO-DAY OPERATIONS COULD " .dlg.msgframe.text insert end "LEAD DIRECTLY TO DEATH, PERSONAL INJURY, " .dlg.msgframe.text insert end "OR SEVERE PHYSICAL OR ENVIRONMENTAL " .dlg.msgframe.text insert end "DAMAGE.\n\n" .dlg.msgframe.text insert end "LIMITED WARRANTY\n" .dlg.msgframe.text insert end "You have no warranty rights under this " .dlg.msgframe.text insert end "agreement whatsoever, expressed or " .dlg.msgframe.text insert end "implied. We don't want to hear from you " .dlg.msgframe.text insert end "if you've got any problems. We don't " .dlg.msgframe.text insert end "give you a number to call for just that " .dlg.msgframe.text insert end "reason. You've got to call the poor " .dlg.msgframe.text insert end "schmuck who sold this to you; they have to " .dlg.msgframe.text insert end "support you themselves, and we won't help " .dlg.msgframe.text insert end "them. We don't care. We don't have " .dlg.msgframe.text insert end "to.\n\n" .dlg.msgframe.text insert end "If you're reading this because it's being " .dlg.msgframe.text insert end "displayed as part of the Vigor startup " .dlg.msgframe.text insert end "sequence, then please let me know by email " .dlg.msgframe.text insert end "at joelh@gnu.org. This dialog box is " .dlg.msgframe.text insert end "intended to be long enough so that it " .dlg.msgframe.text insert end "won't be displayed on the screen.\n\n" .dlg.msgframe.text insert end "Exception: I know that you can click in " .dlg.msgframe.text insert end "the text box, and then hold down the " .dlg.msgframe.text insert end "down arrow key, and thus bypass the scroll " .dlg.msgframe.text insert end "overrides. I'll figure out a way to keep " .dlg.msgframe.text insert end "that from happening later." button .dlg.btnframe.ok -text "I Accept" -command { destroy .dlg } pack .dlg.btnframe.ok -side left -expand 1 -padx 3m -pady 3m -ipadx 2m -ipady 1m vigor_dlg_block } # For some reason, the window isn't moving every time it should. I haven't # yet figured out why that is. I think there may be an issue with the # while test, but I'm not sure. proc rotate_vigor_pos {} { global vigor_pos vigor_holdit if { $vigor_holdit } { return $vigor_pos } # This is a lag to keep vigor from going hysterical if it gets constant # rotate calls. (This happened at one point in the EULA, and I'm not # sure why.) set vigor_holdit 1 after 500 { set vigor_holdit 0 } set old_vigor_pos $vigor_pos # switch -- $vigor_pos {} while { $old_vigor_pos == $vigor_pos } { switch [ v_random 4 ] { "0" { set vigor_pos "-0+0" } "1" { set vigor_pos "-0-0" } "2" { set vigor_pos "+0-0" } default { set vigor_pos "+0+0" } } } wm geometry . $vigor_pos if { ! [ winfo exists .dlg ] } { return $vigor_pos } # We have a dialog that should be moved. We recreate a fair bit of it. set offset 200 pack unpack .dlg.btnframe pack unpack .dlg.msgframe destroy .dlg.spkframe canvas .dlg.spkframe -width 136 -height 34 switch -- $vigor_pos { "+0+0" { .dlg.spkframe create line 0 34 51 34 .dlg.spkframe create line 51 34 34 3 .dlg.spkframe create line 34 3 68 34 .dlg.spkframe create line 68 34 102 34 pack .dlg.spkframe -side top -fill none wm geometry .dlg +0+$offset } "-0+0" { .dlg.spkframe create line 102 34 51 34 .dlg.spkframe create line 51 34 68 3 .dlg.spkframe create line 68 3 34 34 .dlg.spkframe create line 34 34 0 34 pack .dlg.spkframe -side top -fill none wm geometry .dlg -0+$offset } "+0-0" { .dlg.spkframe create line 0 0 51 0 .dlg.spkframe create line 51 0 34 30 .dlg.spkframe create line 34 30 68 0 .dlg.spkframe create line 68 0 102 0 pack .dlg.spkframe -side bottom -fill none wm geometry .dlg +0-$offset } "default" { .dlg.spkframe create line 102 0 51 0 .dlg.spkframe create line 51 0 68 30 .dlg.spkframe create line 68 30 34 0 .dlg.spkframe create line 34 0 0 0 pack .dlg.spkframe -side bottom -fill none wm geometry .dlg -0-$offset } } pack .dlg.msgframe .dlg.btnframe -side top -fill both return $vigor_pos } proc change_xbm { newname } { global xbmid .vigor delete $xbmid set xbmid [ .vigor create bitmap 10p 10p -bitmap $newname -anchor nw ] } proc vigor_animate args { foreach frame $args { change_xbm $frame update after 250 } } proc vigor_cp {} { # The canvas is a dummy to block vigor_randomness canvas .dlg set i [ vigor_animate_bg vigor_rest v2cp0004 v2cp0003 v2cp0002 v2cp0001 v2cp0000 v2cp0000 v2cp0001 v2cp0002 v2cp0003 v2cp0004 vigor_rest ] after [ expr 250 * $i ] { destroy .dlg } } # vigor_randomness # Called once every time input is requested, and once every five seconds. # Should do random annoying things. # # Taunts came from Noah Friedman's silly-mail.el. # They have come from Noah Friedman, Jamie Zawinski, Jim Blandy, # Thomas Bushnell, Roland McGrath, and a cast of dozens. # Some of these were originally taunts about Emacs or X Windows. proc vigor_randomness {} { if { [ winfo exists .dlg ] } { return } switch -glob [v_random 4000] { 0 { vigor_confirm "Are you sure you wish to have a spontanious pohn fahr?" } 1 { vigor_comment "Don't cry --- it won't help." } 2 { vigor_comment "Don't try this at home, kids!" } 3 { vigor_comment "Or perhaps you'd prefer Russian Routlette, after all?" } 4 { vigor_comment "You'll understand when you're older, dear." } 5 { vigor_comment "Want some rye? 'Course ya do!" } 6 { vigor_comment "Your blood pressure just went up a point." } 7 { vigor_comment "Your blood pressure just went up a point." } 8 { vigor_comment "Your blood pressure just went up a point." } 100 { vigor_comment "Vigor: A compelling argument for pencil and paper." } 101 { vigor_comment "Vigor: An inspiring example of form following function... to Hell." } 102 { vigor_comment "Vigor: Because Hell was full." } 103 { vigor_comment "Vigor is freely redistributable; void where prohibited by law." } 104 { vigor_comment "If SIGINT doesn't work, try a tranquilizer." } 105 { vigor_comment "It's all fun and games, until somebody tries to edit a file." } 106 { vigor_comment "Lovecraft was an optimist." } 107 { vigor_comment "Vigor: More than just a pretty face!" } 108 { vigor_comment "Vigor: The only text editor known to get indigestion." } 109 { vigor_comment "Vigor: Where editing text is like playing Paganini on a glass harmonica." } 110 { vigor_comment "Vigor: All the problems and twice the bugs." } 111 { vigor_comment "Vigor: Dissatisfaction guaranteed." } 112 { vigor_comment "Vigor: Don't get frustrated without it." } 113 { vigor_comment "Vigor: Even not doing anything would have been better than nothing." } 114 { vigor_comment "Vigor: Even your dog won't like it." } 115 { vigor_comment "Vigor: Form follows malfunction." } 116 { vigor_comment "Vigor: It could be worse, but it'll take time." } 117 { vigor_comment "Vigor: It could happen to you." } 118 { vigor_comment "Vigor: Let it get in *your* way." } 119 { vigor_comment "Vigor: Live the nightmare." } 120 { vigor_comment "Vigor: Putting new limits on productivity." } 121 { vigor_comment "Vigor: Some voids are better left unfilled." } 122 { vigor_comment "Vigor: The problem for your problem." } 150 { vigor_comment "Vi: It was hard to write; it should be hard to use." } 151 { vigor_comment "VI VI VI: The editor of the beast" } 152 { vigor_comment "Vigor: Putting the ass in assist" } 200 { vigor_comment "X Windows: A mistake carried out to perfection." } 201 { vigor_comment "X Windows: A terminal disease." } "50?" { vigor_cp } "51?" { vigor_cp } "52?" { vigor_cp } } } # This should be invoked once. It causes itself to be invoked every 5000 ms. proc vigor_handle_randomness {} { vigor_randomness after 5000 { vigor_handle_randomness } } proc vigor_animate_bg args { set i 0 foreach frame $args { after [ expr 250 * $i ] [ list change_xbm $frame ] set i [ expr $i + 1 ] } return $i } proc vigor_init {} { global vigor_pos xbmid vigor_holdit wm title . Vigor wm iconname . Vigor canvas .vigor -width 128p -height 128p -background white set xbmid [ .vigor create bitmap 10p 10p -bitmap vigor_empty -anchor nw ] pack .vigor bind . { rotate_vigor_pos } wm protocol . WM_DELETE_WINDOW { vigor_confirm "Are you sure you don't want to close the Vigor assistant?" vigor_comment "Assistant not closed." } set vigor_pos -0+0 set vigor_holdit 0 rotate_vigor_pos vigor_animate vigor_empty vigor_ent_0001 vigor_ent_0002 vigor_ent_0003 vigor_ent_0004 vigor_rest vigor_eula vigor_comment "Hi there! I'm the Vigor Assistant! If you have any questions about VI, just ask me!" vigor_comment "If you haven't used Vigor before, be sure to remember that the Vigor Assistant is here to help you!" vigor_handle_randomness } vigor-0.016.orig/cl/0040755000076400007640000000000007103707315012672 5ustar cjw44cjw44vigor-0.016.orig/cl/cl.h0100644000076400007640000000456507103707235013451 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)cl.h 10.19 (Berkeley) 9/24/96 */ typedef struct _cl_private { CHAR_T ibuf[256]; /* Input keys. */ int eof_count; /* EOF count. */ struct termios orig; /* Original terminal values. */ struct termios ex_enter;/* Terminal values to enter ex. */ struct termios vi_enter;/* Terminal values to enter vi. */ char *el; /* Clear to EOL terminal string. */ char *cup; /* Cursor movement terminal string. */ char *cuu1; /* Cursor up terminal string. */ char *rmso, *smso; /* Inverse video terminal strings. */ char *smcup, *rmcup; /* Terminal start/stop strings. */ int killersig; /* Killer signal. */ #define INDX_HUP 0 #define INDX_INT 1 #define INDX_TERM 2 #define INDX_WINCH 3 #define INDX_MAX 4 /* Original signal information. */ struct sigaction oact[INDX_MAX]; enum { /* Tty group write mode. */ TGW_UNKNOWN=0, TGW_SET, TGW_UNSET } tgw; enum { /* Terminal initialization strings. */ TE_SENT=0, TI_SENT } ti_te; #define CL_IN_EX 0x0001 /* Currently running ex. */ #define CL_RENAME 0x0002 /* X11 xterm icon/window renamed. */ #define CL_RENAME_OK 0x0004 /* User wants the windows renamed. */ #define CL_SCR_EX_INIT 0x0008 /* Ex screen initialized. */ #define CL_SCR_VI_INIT 0x0010 /* Vi screen initialized. */ #define CL_SIGHUP 0x0020 /* SIGHUP arrived. */ #define CL_SIGINT 0x0040 /* SIGINT arrived. */ #define CL_SIGTERM 0x0080 /* SIGTERM arrived. */ #define CL_SIGWINCH 0x0100 /* SIGWINCH arrived. */ #define CL_STDIN_TTY 0x0200 /* Talking to a terminal. */ u_int32_t flags; } CL_PRIVATE; #define CLP(sp) ((CL_PRIVATE *)((sp)->gp->cl_private)) #define GCLP(gp) ((CL_PRIVATE *)gp->cl_private) /* Return possibilities from the keyboard read routine. */ typedef enum { INP_OK=0, INP_EOF, INP_ERR, INP_INTR, INP_TIMEOUT } input_t; /* The screen line relative to a specific window. */ #define RLNO(sp, lno) (sp)->woff + (lno) /* X11 xterm escape sequence to rename the icon/window. */ #define XTERM_RENAME "\033]0;%s\007" /* * XXX * Some implementations of curses.h don't define these for us. Used for * compatibility only. */ #ifndef TRUE #define TRUE 1 #endif #ifndef FALSE #define FALSE 0 #endif #include "cl_extern.h" vigor-0.016.orig/cl/cl_bsd.c0100644000076400007640000001707207103707235014271 0ustar cjw44cjw44/*- * Copyright (c) 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cl_bsd.c 8.29 (Berkeley) 7/1/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #include "cl.h" static char *ke; /* Keypad on. */ static char *ks; /* Keypad off. */ static char *vb; /* Visible bell string. */ /* * HP's support the entire System V curses package except for the tigetstr * and tigetnum functions. Ultrix supports the BSD curses package except * for the idlok function. Cthulu only knows why. Break things up into a * minimal set of functions. */ #ifndef HAVE_CURSES_ADDNSTR /* * addnstr -- * * PUBLIC: #ifndef HAVE_CURSES_ADDNSTR * PUBLIC: int addnstr __P((char *, int)); * PUBLIC: #endif */ int addnstr(s, n) char *s; int n; { int ch; while (n-- && (ch = *s++)) addch(ch); return (OK); } #endif #ifndef HAVE_CURSES_BEEP /* * beep -- * * PUBLIC: #ifndef HAVE_CURSES_BEEP * PUBLIC: void beep __P((void)); * PUBLIC: #endif */ void beep() { (void)write(1, "\007", 1); /* '\a' */ } #endif /* !HAVE_CURSES_BEEP */ #ifndef HAVE_CURSES_FLASH /* * flash -- * Flash the screen. * * PUBLIC: #ifndef HAVE_CURSES_FLASH * PUBLIC: void flash __P((void)); * PUBLIC: #endif */ void flash() { if (vb != NULL) { (void)tputs(vb, 1, cl_putchar); (void)fflush(stdout); } else beep(); } #endif /* !HAVE_CURSES_FLASH */ #ifndef HAVE_CURSES_IDLOK /* * idlok -- * Turn on/off hardware line insert/delete. * * PUBLIC: #ifndef HAVE_CURSES_IDLOK * PUBLIC: void idlok __P((WINDOW *, int)); * PUBLIC: #endif */ void idlok(win, bf) WINDOW *win; int bf; { return; } #endif /* !HAVE_CURSES_IDLOK */ #ifndef HAVE_CURSES_KEYPAD /* * keypad -- * Put the keypad/cursor arrows into or out of application mode. * * PUBLIC: #ifndef HAVE_CURSES_KEYPAD * PUBLIC: int keypad __P((void *, int)); * PUBLIC: #endif */ int keypad(a, on) void *a; int on; { char *p; if ((p = tigetstr(on ? "smkx" : "rmkx")) != (char *)-1) { (void)tputs(p, 0, cl_putchar); (void)fflush(stdout); } return (0); } #endif /* !HAVE_CURSES_KEYPAD */ #ifndef HAVE_CURSES_NEWTERM /* * newterm -- * Create a new curses screen. * * PUBLIC: #ifndef HAVE_CURSES_NEWTERM * PUBLIC: void *newterm __P((const char *, FILE *, FILE *)); * PUBLIC: #endif */ void * newterm(a, b, c) const char *a; FILE *b, *c; { return (initscr()); } #endif /* !HAVE_CURSES_NEWTERM */ #ifndef HAVE_CURSES_SETUPTERM /* * setupterm -- * Set up terminal. * * PUBLIC: #ifndef HAVE_CURSES_SETUPTERM * PUBLIC: void setupterm __P((char *, int, int *)); * PUBLIC: #endif */ void setupterm(ttype, fno, errp) char *ttype; int fno, *errp; { static char buf[2048]; char *p; if ((*errp = tgetent(buf, ttype)) > 0) { if (ke != NULL) free(ke); ke = ((p = tigetstr("rmkx")) == (char *)-1) ? NULL : strdup(p); if (ks != NULL) free(ks); ks = ((p = tigetstr("smkx")) == (char *)-1) ? NULL : strdup(p); if (vb != NULL) free(vb); vb = ((p = tigetstr("flash")) == (char *)-1) ? NULL : strdup(p); } } #endif /* !HAVE_CURSES_SETUPTERM */ #ifndef HAVE_CURSES_TIGETSTR /* Terminfo-to-termcap translation table. */ typedef struct _tl { char *terminfo; /* Terminfo name. */ char *termcap; /* Termcap name. */ } TL; static const TL list[] = { "cols", "co", /* Terminal columns. */ "cup", "cm", /* Cursor up. */ "cuu1", "up", /* Cursor up. */ "el", "ce", /* Clear to end-of-line. */ "flash", "vb", /* Visible bell. */ "kcub1", "kl", /* Cursor left. */ "kcud1", "kd", /* Cursor down. */ "kcuf1", "kr", /* Cursor right. */ "kcuu1", "ku", /* Cursor up. */ "kdch1", "kD", /* Delete character. */ "kdl1", "kL", /* Delete line. */ "ked", "kS", /* Delete to end of screen. */ "kel", "kE", /* Delete to eol. */ "khome", "kh", /* Go to sol. */ "kich1", "kI", /* Insert at cursor. */ "kil1", "kA", /* Insert line. */ "kind", "kF", /* Scroll down. */ "kll", "kH", /* Go to eol. */ "knp", "kN", /* Page down. */ "kpp", "kP", /* Page up. */ "kri", "kR", /* Scroll up. */ "lines", "li", /* Terminal lines. */ "rmcup", "te", /* Terminal end string. */ "rmkx", "ke", /* Exit "keypad-transmit" mode. */ "rmso", "se", /* Standout end. */ "smcup", "ti", /* Terminal initialization string. */ "smkx", "ks", /* Enter "keypad-transmit" mode. */ "smso", "so", /* Standout begin. */ }; #ifdef _AIX /* * AIX's implementation for function keys greater than 10 is different and * only goes as far as 36. */ static const char codes[] = { /* 0-10 */ '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', ';', /* 11-20 */ '<', '>', '!', '@', '#', '$', '%', '^', '&', '*', /* 21-30 */ '(', ')', '-', '_', '+', ',', ':', '?', '[', ']', /* 31-36 */ '{', '}', '|', '~', '/', '=' }; #else /* * !!! * Historically, the 4BSD termcap code didn't support functions keys greater * than 9. This was silently enforced -- asking for key k12 would return the * value for k1. We try and get around this by using the tables specified in * the terminfo(TI_ENV) man page from the 3rd Edition SVID. This assumes the * implementors of any System V compatibility code or an extended termcap used * those codes. */ static const char codes[] = { /* 0-10 */ '0', '1', '2', '3', '4', '5', '6', '7', '8', '9', ';', /* 11-19 */ '1', '2', '3', '4', '5', '6', '7', '8', '9', /* 20-63 */ 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y', 'Z', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', }; #endif /* _AIX */ /* * lcmp -- * list comparison routine for bsearch. */ static int lcmp(a, b) const void *a, *b; { return (strcmp(a, ((TL *)b)->terminfo)); } /* * tigetstr -- * * Vendors put the prototype for tigetstr into random include files, including * , which we can't include because it makes other systems unhappy. * Try and work around the problem, since we only care about the return value. * * PUBLIC: #ifdef HAVE_CURSES_TIGETSTR * PUBLIC: char *tigetstr(); * PUBLIC: #else * PUBLIC: char *tigetstr __P((char *)); * PUBLIC: #endif */ char * tigetstr(name) char *name; { static char sbuf[256]; TL *tlp; int n; char *p, keyname[3]; if ((tlp = bsearch(name, list, sizeof(list) / sizeof(TL), sizeof(TL), lcmp)) == NULL) { #ifdef _AIX if (name[0] == 'k' && name[1] == 'f' && (n = atoi(name + 2)) <= 36) { keyname[0] = 'k'; keyname[1] = codes[n]; keyname[2] = '\0'; #else if (name[0] == 'k' && name[1] == 'f' && (n = atoi(name + 2)) <= 63) { keyname[0] = n <= 10 ? 'k' : 'F'; keyname[1] = codes[n]; keyname[2] = '\0'; #endif name = keyname; } } else name = tlp->termcap; p = sbuf; #ifdef _AIX return ((p = tgetstr(name, &p)) == NULL ? (char *)-1 : strcpy(sbuf, p)); #else return (tgetstr(name, &p) == NULL ? (char *)-1 : sbuf); #endif } /* * tigetnum -- * * PUBLIC: #ifndef HAVE_CURSES_TIGETSTR * PUBLIC: int tigetnum __P((char *)); * PUBLIC: #endif */ int tigetnum(name) char *name; { TL *tlp; int val; if ((tlp = bsearch(name, list, sizeof(list) / sizeof(TL), sizeof(TL), lcmp)) != NULL) { name = tlp->termcap; } return ((val = tgetnum(name)) == -1 ? -2 : val); } #endif /* !HAVE_CURSES_TIGETSTR */ vigor-0.016.orig/cl/cl_funcs.c0100644000076400007640000003700607103707235014636 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cl_funcs.c 10.50 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #include "cl.h" /* * cl_addstr -- * Add len bytes from the string at the cursor, advancing the cursor. * * PUBLIC: int cl_addstr __P((SCR *, const char *, size_t)); */ int cl_addstr(sp, str, len) SCR *sp; const char *str; size_t len; { CL_PRIVATE *clp; size_t oldy, oldx; int iv; clp = CLP(sp); /* * If ex isn't in control, it's the last line of the screen and * it's a split screen, use inverse video. */ iv = 0; getyx(stdscr, oldy, oldx); if (!F_ISSET(sp, SC_SCR_EXWROTE) && oldy == RLNO(sp, LASTLINE(sp)) && IS_SPLIT(sp)) { iv = 1; (void)standout(); } if (addnstr(str, len) == ERR) return (1); if (iv) (void)standend(); return (0); } /* * cl_attr -- * Toggle a screen attribute on/off. * * PUBLIC: int cl_attr __P((SCR *, scr_attr_t, int)); */ int cl_attr(sp, attribute, on) SCR *sp; scr_attr_t attribute; int on; { CL_PRIVATE *clp; clp = CLP(sp); switch (attribute) { case SA_ALTERNATE: /* * !!! * There's a major layering violation here. The problem is that the * X11 xterm screen has what's known as an "alternate" screen. Some * xterm termcap/terminfo entries include sequences to switch to/from * that alternate screen as part of the ti/te (smcup/rmcup) strings. * Vi runs in the alternate screen, so that you are returned to the * same screen contents on exit from vi that you had when you entered * vi. Further, when you run :shell, or :!date or similar ex commands, * you also see the original screen contents. This wasn't deliberate * on vi's part, it's just that it historically sent terminal init/end * sequences at those times, and the addition of the alternate screen * sequences to the strings changed the behavior of vi. The problem * caused by this is that we don't want to switch back to the alternate * screen while getting a new command from the user, when the user is * continuing to enter ex commands, e.g.: * * :!date <<< switch to original screen * [Hit return to continue] <<< prompt user to continue * :command <<< get command from user * * Note that the :command input is a true vi input mode, e.g., input * maps and abbreviations are being done. So, we need to be able to * switch back into the vi screen mode, without flashing the screen. * * To make matters worse, the curses initscr() and endwin() calls will * do this automatically -- so, this attribute isn't as controlled by * the higher level screen as closely as one might like. */ if (on) { if (clp->ti_te != TI_SENT) { clp->ti_te = TI_SENT; if (clp->smcup == NULL) (void)cl_getcap(sp, "smcup", &clp->smcup); if (clp->smcup != NULL) (void)tputs(clp->smcup, 1, cl_putchar); } } else if (clp->ti_te != TE_SENT) { clp->ti_te = TE_SENT; if (clp->rmcup == NULL) (void)cl_getcap(sp, "rmcup", &clp->rmcup); if (clp->rmcup != NULL) (void)tputs(clp->rmcup, 1, cl_putchar); (void)fflush(stdout); } (void)fflush(stdout); break; case SA_INVERSE: if (F_ISSET(sp, SC_EX | SC_SCR_EXWROTE)) { if (clp->smso == NULL) return (1); if (on) (void)tputs(clp->smso, 1, cl_putchar); else (void)tputs(clp->rmso, 1, cl_putchar); (void)fflush(stdout); } else { if (on) (void)standout(); else (void)standend(); } break; default: abort(); } return (0); } /* * cl_baud -- * Return the baud rate. * * PUBLIC: int cl_baud __P((SCR *, u_long *)); */ int cl_baud(sp, ratep) SCR *sp; u_long *ratep; { CL_PRIVATE *clp; /* * XXX * There's no portable way to get a "baud rate" -- cfgetospeed(3) * returns the value associated with some #define, which we may * never have heard of, or which may be a purely local speed. Vi * only cares if it's SLOW (w300), slow (w1200) or fast (w9600). * Try and detect the slow ones, and default to fast. */ clp = CLP(sp); switch (cfgetospeed(&clp->orig)) { case B50: case B75: case B110: case B134: case B150: case B200: case B300: case B600: *ratep = 600; break; case B1200: *ratep = 1200; break; default: *ratep = 9600; break; } return (0); } /* * cl_bell -- * Ring the bell/flash the screen. * * PUBLIC: int cl_bell __P((SCR *)); */ int cl_bell(sp) SCR *sp; { if (F_ISSET(sp, SC_EX | SC_SCR_EXWROTE)) (void)write(STDOUT_FILENO, "\07", 1); /* \a */ else { /* * Vi has an edit option which determines if the terminal * should be beeped or the screen flashed. */ if (O_ISSET(sp, O_FLASH)) (void)flash(); else (void)beep(); } return (0); } /* * cl_clrtoeol -- * Clear from the current cursor to the end of the line. * * PUBLIC: int cl_clrtoeol __P((SCR *)); */ int cl_clrtoeol(sp) SCR *sp; { return (clrtoeol() == ERR); } /* * cl_cursor -- * Return the current cursor position. * * PUBLIC: int cl_cursor __P((SCR *, size_t *, size_t *)); */ int cl_cursor(sp, yp, xp) SCR *sp; size_t *yp, *xp; { /* * The curses screen support splits a single underlying curses screen * into multiple screens to support split screen semantics. For this * reason the returned value must be adjusted to be relative to the * current screen, and not absolute. Screens that implement the split * using physically distinct screens won't need this hack. */ getyx(stdscr, *yp, *xp); *yp -= sp->woff; return (0); } /* * cl_deleteln -- * Delete the current line, scrolling all lines below it. * * PUBLIC: int cl_deleteln __P((SCR *)); */ int cl_deleteln(sp) SCR *sp; { CHAR_T ch; CL_PRIVATE *clp; size_t col, lno, spcnt, oldy, oldx; clp = CLP(sp); /* * This clause is required because the curses screen uses reverse * video to delimit split screens. If the screen does not do this, * this code won't be necessary. * * If the bottom line was in reverse video, rewrite it in normal * video before it's scrolled. * * Check for the existence of a chgat function; XSI requires it, but * historic implementations of System V curses don't. If it's not * a #define, we'll fall back to doing it by hand, which is slow but * acceptable. * * By hand means walking through the line, retrieving and rewriting * each character. Curses has no EOL marker, so track strings of * spaces, and copy the trailing spaces only if there's a non-space * character following. */ if (!F_ISSET(sp, SC_SCR_EXWROTE) && IS_SPLIT(sp)) { getyx(stdscr, oldy, oldx); #ifdef mvchgat mvchgat(RLNO(sp, LASTLINE(sp)), 0, -1, A_NORMAL, 0, NULL); #else for (lno = RLNO(sp, LASTLINE(sp)), col = spcnt = 0;;) { (void)move(lno, col); ch = winch(stdscr); if (isblank(ch)) ++spcnt; else { (void)move(lno, col - spcnt); for (; spcnt > 0; --spcnt) (void)addch(' '); (void)addch(ch); } if (++col >= sp->cols) break; } #endif (void)move(oldy, oldx); } /* * The bottom line is expected to be blank after this operation, * and other screens must support that semantic. */ return (deleteln() == ERR); } /* * cl_ex_adjust -- * Adjust the screen for ex. This routine is purely for standalone * ex programs. All special purpose, all special case. * * PUBLIC: int cl_ex_adjust __P((SCR *, exadj_t)); */ int cl_ex_adjust(sp, action) SCR *sp; exadj_t action; { CL_PRIVATE *clp; int cnt; clp = CLP(sp); switch (action) { case EX_TERM_SCROLL: /* Move the cursor up one line if that's possible. */ if (clp->cuu1 != NULL) (void)tputs(clp->cuu1, 1, cl_putchar); else if (clp->cup != NULL) (void)tputs(tgoto(clp->cup, 0, LINES - 2), 1, cl_putchar); else return (0); /* FALLTHROUGH */ case EX_TERM_CE: /* Clear the line. */ if (clp->el != NULL) { (void)putchar('\r'); (void)tputs(clp->el, 1, cl_putchar); } else { /* * Historically, ex didn't erase the line, so, if the * displayed line was only a single glyph, and * was more than one glyph, the output would not fully * overwrite the user's input. To fix this, output * the maxiumum character number of spaces. Note, * this won't help if the user entered extra prompt * or characters before the command character. * We'd have to do a lot of work to make that work, and * it's almost certainly not worth the effort. */ for (cnt = 0; cnt < MAX_CHARACTER_COLUMNS; ++cnt) (void)putchar('\b'); for (cnt = 0; cnt < MAX_CHARACTER_COLUMNS; ++cnt) (void)putchar(' '); (void)putchar('\r'); (void)fflush(stdout); } break; default: abort(); } return (0); } /* * cl_insertln -- * Push down the current line, discarding the bottom line. * * PUBLIC: int cl_insertln __P((SCR *)); */ int cl_insertln(sp) SCR *sp; { /* * The current line is expected to be blank after this operation, * and the screen must support that semantic. */ return (insertln() == ERR); } /* * cl_keyval -- * Return the value for a special key. * * PUBLIC: int cl_keyval __P((SCR *, scr_keyval_t, CHAR_T *, int *)); */ int cl_keyval(sp, val, chp, dnep) SCR *sp; scr_keyval_t val; CHAR_T *chp; int *dnep; { CL_PRIVATE *clp; /* * VEOF, VERASE and VKILL are required by POSIX 1003.1-1990, * VWERASE is a 4BSD extension. */ clp = CLP(sp); switch (val) { case KEY_VEOF: *dnep = (*chp = clp->orig.c_cc[VEOF]) == _POSIX_VDISABLE; break; case KEY_VERASE: *dnep = (*chp = clp->orig.c_cc[VERASE]) == _POSIX_VDISABLE; break; case KEY_VKILL: *dnep = (*chp = clp->orig.c_cc[VKILL]) == _POSIX_VDISABLE; break; #ifdef VWERASE case KEY_VWERASE: *dnep = (*chp = clp->orig.c_cc[VWERASE]) == _POSIX_VDISABLE; break; #endif default: *dnep = 1; break; } return (0); } /* * cl_move -- * Move the cursor. * * PUBLIC: int cl_move __P((SCR *, size_t, size_t)); */ int cl_move(sp, lno, cno) SCR *sp; size_t lno, cno; { /* See the comment in cl_cursor. */ if (move(RLNO(sp, lno), cno) == ERR) { msgq(sp, M_ERR, "Error: move: l(%u) c(%u) o(%u)", lno, cno, sp->woff); return (1); } return (0); } /* * cl_refresh -- * Refresh the screen. * * PUBLIC: int cl_refresh __P((SCR *, int)); */ int cl_refresh(sp, repaint) SCR *sp; int repaint; { CL_PRIVATE *clp; clp = CLP(sp); /* * If we received a killer signal, we're done, there's no point * in refreshing the screen. */ if (clp->killersig) return (0); /* * If repaint is set, the editor is telling us that we don't know * what's on the screen, so we have to repaint from scratch. * * In the curses library, doing wrefresh(curscr) is okay, but the * screen flashes when we then apply the refresh() to bring it up * to date. So, use clearok(). */ if (repaint) clearok(curscr, 1); return (refresh() == ERR); } /* * cl_rename -- * Rename the file. * * PUBLIC: int cl_rename __P((SCR *, char *, int)); */ int cl_rename(sp, name, on) SCR *sp; char *name; int on; { GS *gp; CL_PRIVATE *clp; char *ttype; gp = sp->gp; clp = CLP(sp); ttype = OG_STR(gp, GO_TERM); /* * XXX * We can only rename windows for xterm. */ if (on) { if (F_ISSET(clp, CL_RENAME_OK) && !strncmp(ttype, "xterm", sizeof("xterm") - 1)) { F_SET(clp, CL_RENAME); (void)printf(XTERM_RENAME, name); (void)fflush(stdout); } } else if (F_ISSET(clp, CL_RENAME)) { F_CLR(clp, CL_RENAME); (void)printf(XTERM_RENAME, ttype); (void)fflush(stdout); } return (0); } /* * cl_suspend -- * Suspend a screen. * * PUBLIC: int cl_suspend __P((SCR *, int *)); */ int cl_suspend(sp, allowedp) SCR *sp; int *allowedp; { struct termios t; CL_PRIVATE *clp; GS *gp; size_t oldy, oldx; int changed; gp = sp->gp; clp = CLP(sp); *allowedp = 1; /* * The ex implementation of this function isn't needed by screens not * supporting ex commands that require full terminal canonical mode * (e.g. :suspend). * * The vi implementation of this function isn't needed by screens not * supporting vi process suspension, i.e. any screen that isn't backed * by a UNIX shell. * * Setting allowedp to 0 will cause the editor to reject the command. */ if (F_ISSET(sp, SC_EX)) { /* Save the terminal settings, and restore the original ones. */ if (F_ISSET(clp, CL_STDIN_TTY)) { (void)tcgetattr(STDIN_FILENO, &t); (void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &clp->orig); } /* Stop the process group. */ (void)kill(0, SIGTSTP); /* Time passes ... */ /* Restore terminal settings. */ if (F_ISSET(clp, CL_STDIN_TTY)) (void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &t); return (0); } /* * Move to the lower left-hand corner of the screen. * * XXX * Not sure this is necessary in System V implementations, but it * shouldn't hurt. */ getyx(stdscr, oldy, oldx); (void)move(LINES - 1, 0); (void)refresh(); /* * Temporarily end the screen. System V introduced a semantic where * endwin() could be restarted. We use it because restarting curses * from scratch often fails in System V. 4BSD curses didn't support * restarting after endwin(), so we have to do what clean up we can * without calling it. */ #ifdef HAVE_BSD_CURSES /* Save the terminal settings. */ (void)tcgetattr(STDIN_FILENO, &t); #endif /* Restore the cursor keys to normal mode. */ (void)keypad(stdscr, FALSE); /* Restore the window name. */ (void)cl_rename(sp, NULL, 0); #ifdef HAVE_BSD_CURSES (void)cl_attr(sp, SA_ALTERNATE, 0); #else (void)endwin(); #endif /* * XXX * Restore the original terminal settings. This is bad -- the * reset can cause character loss from the tty queue. However, * we can't call endwin() in BSD curses implementations, and too * many System V curses implementations don't get it right. */ (void)tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->orig); /* Stop the process group. */ (void)kill(0, SIGTSTP); /* Time passes ... */ /* * If we received a killer signal, we're done. Leave everything * unchanged. In addition, the terminal has already been reset * correctly, so leave it alone. */ if (clp->killersig) { F_CLR(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT); return (0); } #ifdef HAVE_BSD_CURSES /* Restore terminal settings. */ if (F_ISSET(clp, CL_STDIN_TTY)) (void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &t); (void)cl_attr(sp, SA_ALTERNATE, 1); #endif /* Set the window name. */ (void)cl_rename(sp, sp->frp->name, 1); /* Put the cursor keys into application mode. */ (void)keypad(stdscr, TRUE); /* Refresh and repaint the screen. */ (void)move(oldy, oldx); (void)cl_refresh(sp, 1); /* If the screen changed size, set the SIGWINCH bit. */ if (cl_ssize(sp, 1, NULL, NULL, &changed)) return (1); if (changed) F_SET(CLP(sp), CL_SIGWINCH); return (0); } /* * cl_usage -- * Print out the curses usage messages. * * PUBLIC: void cl_usage __P((void)); */ void cl_usage() { #define USAGE "\ usage: ex [-eFRrSsv] [-c command] [-t tag] [-w size] [file ...]\n\ usage: vi [-eFlRrSv] [-c command] [-t tag] [-w size] [file ...]\n" (void)fprintf(stderr, "%s", USAGE); #undef USAGE } #ifdef DEBUG /* * gdbrefresh -- * Stub routine so can flush out curses screen changes using gdb. */ int gdbrefresh() { refresh(); return (0); /* XXX Convince gdb to run it. */ } #endif vigor-0.016.orig/cl/README.signal0100644000076400007640000002214207103707235015025 0ustar cjw44cjw44# @(#)README.signal 10.1 (Berkeley) 6/23/95 There are six (normally) asynchronous actions about which vi cares: SIGHUP, SIGINT, SIGQUIT, SIGTERM, SIGTSTP and SIGWINCH. The assumptions: 1: The DB routines are not reentrant. 2: The curses routines may not be reentrant. 3: Neither DB nor curses will restart system calls. XXX Note, most C library functions don't restart system calls. So, we should *probably* start blocking around any imported function that we don't know doesn't make a system call. This is going to be a genuine annoyance... SIGHUP, SIGTERM Used for file recovery. The DB routines can't be reentered, nor can they handle interrupted system calls, so the vi routines that call DB block signals. This means that DB routines could be called at interrupt time, if necessary. SIGQUIT Disabled by the signal initialization routines. Historically, ^\ switched vi into ex mode, and we continue that practice. SIGWINCH: The interrupt routine sets a global bit which is checked by the key-read routine, so there are no reentrancy issues. This means that the screen will not resize until vi runs out of keys, but that doesn't seem like a problem. SIGINT and SIGTSTP are a much more difficult issue to resolve. Vi has to permit the user to interrupt long-running operations. Generally, a search, substitution or read/write is done on a large file, or, the user creates a key mapping with an infinite loop. This problem will become worse as more complex semantics are added to vi, especially things like making it a pure text widget. There are four major solutions on the table, each of which have minor permutations. 1: Run in raw mode. The up side is that there's no asynchronous behavior to worry about, and obviously no reentrancy problems. The down side is that it's easy to misinterpret characters (e.g. :w big_file^Mi^V^C is going to look like an interrupt) and it's easy to get into places where we won't see interrupt characters (e.g. ":map a ixx^[hxxaXXX" infinitely loops in historic implementations of vi). Periodically reading the terminal input buffer might solve the latter problem, but it's not going to be pretty. Also, we're going to be checking for ^C's and ^Z's both, all over the place -- I hate to litter the source code with that. For example, the historic version of vi didn't permit you to suspend the screen if you were on the colon command line. This isn't right. ^Z isn't a vi command, it's a terminal event. (Dammit.) 2: Run in cbreak mode. There are two problems in this area. First, the current curses implementations (both System V and Berkeley) don't give you clean cbreak modes. For example, the IEXTEN bit is left on, turning on DISCARD and LNEXT. To clarify, what vi WANTS is 8-bit clean, with the exception that flow control and signals are turned on, and curses cbreak mode doesn't give you this. We can either set raw mode and twiddle the tty, or cbreak mode and twiddle the tty. I chose to use raw mode, on the grounds that raw mode is better defined and I'm less likely to be surprised by a curses implementation down the road. The twiddling consists of setting ISIG, IXON/IXOFF, and disabling some of the interrupt characters (see the comments in cl_init.c). This is all found in historic System V (SVID 3) and POSIX 1003.1-1992, so it should be fairly portable. The second problem is that vi permits you to enter literal signal characters, e.g. ^V^C. There are two possible solutions. First, you can turn off signals when you get a ^V, but that means that a network packet containing ^V and ^C will lose, since the ^C may take effect before vi reads the ^V. (This is particularly problematic if you're talking over a protocol that recognizes signals locally and sends OOB packets when it sees them.) Second, you can turn the ^C into a literal character in vi, but that means that there's a race between entering ^V^C, i.e. the sequence may end up being ^V^C. Also, the second solution doesn't work for flow control characters, as they aren't delivered to the program as signals. Generally, this is what historic vi did. (It didn't have the curses problems because it didn't use curses.) It entered signals following ^V characters into the input stream, (which is why there's no way to enter a literal flow control character). 3: Run in mostly raw mode; turn signals on when doing an operation the user might want to interrupt, but leave them off most of the time. This works well for things like file reads and writes. This doesn't work well for trying to detect infinite maps. The problem is that you can write the code so that you don't have to turn on interrupts per keystroke, but the code isn't pretty and it's hard to make sure that an optimization doesn't cover up an infinite loop. This also requires interaction or state between the vi parser and the key reading routines, as an infinite loop may still be returning keys to the parser. Also, if the user inserts an interrupt into the tty queue while the interrupts are turned off, the key won't be treated as an interrupt, and requiring the user to pound the keyboard to catch an interrupt window is nasty. 4: Run in mostly raw mode, leaving signals on all of the time. Done by setting raw mode, and twiddling the tty's termios ISIG bit. This works well for the interrupt cases, because the code only has to check to see if the interrupt flag has been set, and can otherwise ignore signals. It's also less likely that we'll miss a case, and we don't have to worry about synchronizing between the vi parser and the key read routines. The down side is that we have to turn signals off if the user wants to enter a literal character (e.g. ^V^C). If the user enters the combination fast enough, or as part of a single network packet, the text input routines will treat it as a signal instead of as a literal character. To some extent, we have this problem already, since we turn off flow control so that the user can enter literal XON/XOFF characters. This is probably the easiest to code, and provides the smoothest programming interface. There are a couple of other problems to consider. First, System V's curses doesn't handle SIGTSTP correctly. If you use the newterm() interface, the TSTP signal will leave you in raw mode, and the final endwin() will leave you in the correct shell mode. If you use the initscr() interface, the TSTP signal will return you to the correct shell mode, but the final endwin() will leave you in raw mode. There you have it: proof that drug testing is not making any significant headway in the computer industry. The 4BSD curses is deficient in that it does not have an interface to the terminal keypad. So, regardless, we have to do our own SIGTSTP handling. The problem with this is that if we do our own SIGTSTP handling, in either models #3 or #4, we're going to have to call curses routines at interrupt time, which means that we might be reentering curses, which is something we don't want to do. Second, SIGTSTP has its own little problems. It's broadcast to the entire process group, not sent to a single process. The scenario goes something like this: the shell execs the mail program, which execs vi. The user hits ^Z, and all three programs get the signal, in some random order. The mail program goes to sleep immediately (since it probably didn't have a SIGTSTP handler in place). The shell gets a SIGCHLD, does a wait, and finds out that the only child in its foreground process group (of which it's aware) is asleep. It then optionally resets the terminal (because the modes aren't how it left them), and starts prompting the user for input. The problem is that somewhere in the middle of all of this, vi is resetting the terminal, and getting ready to send a SIGTSTP to the process group in order to put itself to sleep. There's a solution to all of this: when vi starts, it puts itself into its own process group, and then only it (and possible child processes) receive the SIGTSTP. This permits it to clean up the terminal and switch back to the original process group, where it sends that process group a SIGTSTP, putting everyone to sleep and waking the shell. Third, handing SIGTSTP asynchronously is further complicated by the child processes vi may fork off. If vi calls ex, ex resets the terminal and starts running some filter, and SIGTSTP stops them both, vi has to know when it restarts that it can't repaint the screen until ex's child has finished running. This is solveable, but it's annoying. Well, somebody had to make a decision, and this is the way it's going to be (unless I get talked out of it). SIGINT is handled asynchronously, so that we can pretty much guarantee that the user can interrupt any operation at any time. SIGTSTP is handled synchronously, so that we don't have to reenter curses and so that we don't have to play the process group games. ^Z is recognized in the standard text input and command modes. (^Z should also be recognized during operations that may potentially take a long time. The simplest solution is probably to twiddle the tty, install a handler for SIGTSTP, and then restore normal tty modes when the operation is complete.) vigor-0.016.orig/cl/cl_main.c0100644000076400007640000002314007103707235014436 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cl_main.c 10.36 (Berkeley) 10/14/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #ifdef RUNNING_IP #include "../ip/ip.h" #endif #include "cl.h" #include "pathnames.h" GS *__global_list; /* GLOBAL: List of screens. */ sigset_t __sigblockset; /* GLOBAL: Blocked signals. */ static void cl_func_std __P((GS *)); static CL_PRIVATE *cl_init __P((GS *)); static GS *gs_init __P((char *)); static void perr __P((char *, char *)); static int setsig __P((int, struct sigaction *, void (*)(int))); static void sig_end __P((GS *)); static void term_init __P((char *, char *)); /* * main -- * This is the main loop for the standalone curses editor. */ int main(argc, argv) int argc; char *argv[]; { static int reenter; CL_PRIVATE *clp; GS *gp; size_t rows, cols; int rval; char *ip_arg, **p_av, **t_av, *ttype; /* If loaded at 0 and jumping through a NULL pointer, stop. */ if (reenter++) abort(); /* Create and initialize the global structure. */ __global_list = gp = gs_init(argv[0]); /* * Strip out any arguments that vi isn't going to understand. There's * no way to portably call getopt twice, so arguments parsed here must * be removed from the argument list. */ #ifdef RUNNING_IP ip_arg = NULL; for (p_av = t_av = argv;;) { if (*t_av == NULL) { *p_av = NULL; break; } if (!strcmp(*t_av, "--")) { while ((*p_av++ = *t_av++) != NULL); break; } if (!memcmp(*t_av, "-I", sizeof("-I") - 1)) { if (t_av[0][2] != '\0') { ip_arg = t_av[0] + 2; ++t_av; --argc; continue; } if (t_av[1] != NULL) { ip_arg = t_av[1]; t_av += 2; argc -= 2; continue; } } *p_av++ = *t_av++; } /* * If we're being called as an editor library, we're done here, we * get loaded with the curses screen, we don't share much code. */ if (ip_arg != NULL) exit (ip_main(argc, argv, gp, ip_arg)); #else ip_arg = argv[0]; #endif /* Create and initialize the CL_PRIVATE structure. */ clp = cl_init(gp); /* * Initialize the terminal information. * * We have to know what terminal it is from the start, since we may * have to use termcap/terminfo to find out how big the screen is. */ if ((ttype = getenv("TERM")) == NULL) ttype = "unknown"; term_init(gp->progname, ttype); /* Add the terminal type to the global structure. */ if ((OG_D_STR(gp, GO_TERM) = OG_STR(gp, GO_TERM) = strdup(ttype)) == NULL) perr(gp->progname, NULL); /* Figure out how big the screen is. */ if (cl_ssize(NULL, 0, &rows, &cols, NULL)) exit (1); /* Add the rows and columns to the global structure. */ OG_VAL(gp, GO_LINES) = OG_D_VAL(gp, GO_LINES) = rows; OG_VAL(gp, GO_COLUMNS) = OG_D_VAL(gp, GO_COLUMNS) = cols; /* Ex wants stdout to be buffered. */ (void)setvbuf(stdout, NULL, _IOFBF, 0); /* Start catching signals. */ if (sig_init(gp, NULL)) exit (1); /* Run ex/vi. */ rval = editor(gp, argc, argv); /* Clean up signals. */ sig_end(gp); /* Clean up the terminal. */ (void)cl_quit(gp); /* * XXX * Reset the O_MESG option. */ if (clp->tgw != TGW_UNKNOWN) (void)cl_omesg(NULL, clp, clp->tgw == TGW_SET); /* * XXX * Reset the X11 xterm icon/window name. */ if (F_ISSET(clp, CL_RENAME)) { (void)printf(XTERM_RENAME, ttype); (void)fflush(stdout); } /* If a killer signal arrived, pretend we just got it. */ if (clp->killersig) { (void)signal(clp->killersig, SIG_DFL); (void)kill(getpid(), clp->killersig); /* NOTREACHED */ } /* Free the global and CL private areas. */ #if defined(DEBUG) || defined(PURIFY) || defined(LIBRARY) free(clp); free(gp); #endif exit (rval); } /* * gs_init -- * Create and partially initialize the GS structure. */ static GS * gs_init(name) char *name; { CL_PRIVATE *clp; GS *gp; char *p; /* Figure out what our name is. */ if ((p = strrchr(name, '/')) != NULL) name = p + 1; /* Allocate the global structure. */ CALLOC_NOMSG(NULL, gp, GS *, 1, sizeof(GS)); if (gp == NULL) perr(name, NULL); gp->progname = name; return (gp); } /* * cl_init -- * Create and partially initialize the CL structure. */ static CL_PRIVATE * cl_init(gp) GS *gp; { CL_PRIVATE *clp; int fd; /* Allocate the CL private structure. */ CALLOC_NOMSG(NULL, clp, CL_PRIVATE *, 1, sizeof(CL_PRIVATE)); if (clp == NULL) perr(gp->progname, NULL); gp->cl_private = clp; /* * Set the CL_STDIN_TTY flag. It's purpose is to avoid setting * and resetting the tty if the input isn't from there. We also * use the same test to determine if we're running a script or * not. */ if (isatty(STDIN_FILENO)) F_SET(clp, CL_STDIN_TTY); else F_SET(gp, G_SCRIPTED); /* * We expect that if we've lost our controlling terminal that the * open() (but not the tcgetattr()) will fail. */ if (F_ISSET(clp, CL_STDIN_TTY)) { if (tcgetattr(STDIN_FILENO, &clp->orig) == -1) goto tcfail; } else if ((fd = open(_PATH_TTY, O_RDONLY, 0)) != -1) { if (tcgetattr(fd, &clp->orig) == -1) { tcfail: perr(gp->progname, "tcgetattr"); exit (1); } (void)close(fd); } /* Initialize the list of curses functions. */ cl_func_std(gp); return (clp); } /* * term_init -- * Initialize terminal information. */ static void term_init(name, ttype) char *name, *ttype; { int err; /* Set up the terminal database information. */ setupterm(ttype, STDOUT_FILENO, &err); switch (err) { case -1: (void)fprintf(stderr, "%s: No terminal database found\n", name); exit (1); case 0: (void)fprintf(stderr, "%s: %s: unknown terminal type\n", name, ttype); exit (1); } } #define GLOBAL_CLP \ CL_PRIVATE *clp = GCLP(__global_list); static void h_hup(signo) int signo; { GLOBAL_CLP; F_SET(clp, CL_SIGHUP); clp->killersig = SIGHUP; } static void h_int(signo) int signo; { GLOBAL_CLP; F_SET(clp, CL_SIGINT); } static void h_term(signo) int signo; { GLOBAL_CLP; F_SET(clp, CL_SIGTERM); clp->killersig = SIGTERM; } static void h_winch(signo) int signo; { GLOBAL_CLP; F_SET(clp, CL_SIGWINCH); } #undef GLOBAL_CLP /* * sig_init -- * Initialize signals. * * PUBLIC: int sig_init __P((GS *, SCR *)); */ int sig_init(gp, sp) GS *gp; SCR *sp; { CL_PRIVATE *clp; clp = GCLP(gp); if (sp == NULL) { (void)sigemptyset(&__sigblockset); if (sigaddset(&__sigblockset, SIGHUP) || setsig(SIGHUP, &clp->oact[INDX_HUP], h_hup) || sigaddset(&__sigblockset, SIGINT) || setsig(SIGINT, &clp->oact[INDX_INT], h_int) || sigaddset(&__sigblockset, SIGTERM) || setsig(SIGTERM, &clp->oact[INDX_TERM], h_term) #ifdef SIGWINCH || sigaddset(&__sigblockset, SIGWINCH) || setsig(SIGWINCH, &clp->oact[INDX_WINCH], h_winch) #endif ) { perr(gp->progname, NULL); return (1); } } else if (setsig(SIGHUP, NULL, h_hup) || setsig(SIGINT, NULL, h_int) || setsig(SIGTERM, NULL, h_term) #ifdef SIGWINCH || setsig(SIGWINCH, NULL, h_winch) #endif ) { msgq(sp, M_SYSERR, "signal-reset"); } return (0); } /* * setsig -- * Set a signal handler. */ static int setsig(signo, oactp, handler) int signo; struct sigaction *oactp; void (*handler) __P((int)); { struct sigaction act; /* * Use sigaction(2), not signal(3), since we don't always want to * restart system calls. The example is when waiting for a command * mode keystroke and SIGWINCH arrives. Besides, you can't portably * restart system calls (thanks, POSIX!). On the other hand, you * can't portably NOT restart system calls (thanks, Sun!). SunOS * used SA_INTERRUPT as their extension to NOT restart read calls. * We sure hope nobody else used it for anything else. Mom told me * there'd be days like this. She just never told me that there'd * be so many. */ act.sa_handler = handler; sigemptyset(&act.sa_mask); #ifdef SA_INTERRUPT act.sa_flags = SA_INTERRUPT; #else act.sa_flags = 0; #endif return (sigaction(signo, &act, oactp)); } /* * sig_end -- * End signal setup. */ static void sig_end(gp) GS *gp; { CL_PRIVATE *clp; clp = GCLP(gp); (void)sigaction(SIGHUP, NULL, &clp->oact[INDX_HUP]); (void)sigaction(SIGINT, NULL, &clp->oact[INDX_INT]); (void)sigaction(SIGTERM, NULL, &clp->oact[INDX_TERM]); #ifdef SIGWINCH (void)sigaction(SIGWINCH, NULL, &clp->oact[INDX_WINCH]); #endif } /* * cl_func_std -- * Initialize the standard curses functions. */ static void cl_func_std(gp) GS *gp; { gp->scr_addstr = cl_addstr; gp->scr_attr = cl_attr; gp->scr_baud = cl_baud; gp->scr_bell = cl_bell; gp->scr_busy = NULL; gp->scr_clrtoeol = cl_clrtoeol; gp->scr_cursor = cl_cursor; gp->scr_deleteln = cl_deleteln; gp->scr_event = cl_event; gp->scr_ex_adjust = cl_ex_adjust; gp->scr_fmap = cl_fmap; gp->scr_insertln = cl_insertln; gp->scr_keyval = cl_keyval; gp->scr_move = cl_move; gp->scr_msg = NULL; gp->scr_optchange = cl_optchange; gp->scr_refresh = cl_refresh; gp->scr_rename = cl_rename; gp->scr_screen = cl_screen; gp->scr_suspend = cl_suspend; gp->scr_usage = cl_usage; } /* * perr -- * Print system error. */ static void perr(name, msg) char *name, *msg; { (void)fprintf(stderr, "%s:", name); if (msg != NULL) (void)fprintf(stderr, "%s:", msg); (void)fprintf(stderr, "%s\n", strerror(errno)); exit(1); } vigor-0.016.orig/cl/cl_read.c0100644000076400007640000001776507103707235014445 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cl_read.c 10.15 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #ifdef HAVE_SYS_SELECT_H #include #endif #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../ex/script.h" #include "cl.h" static input_t cl_read __P((SCR *, u_int32_t, CHAR_T *, size_t, int *, struct timeval *)); static int cl_resize __P((SCR *, size_t, size_t)); /* * cl_event -- * Return a single event. * * PUBLIC: int cl_event __P((SCR *, EVENT *, u_int32_t, int)); */ int cl_event(sp, evp, flags, ms) SCR *sp; EVENT *evp; u_int32_t flags; int ms; { struct timeval t, *tp; CL_PRIVATE *clp; size_t lines, columns; int changed, nr; /* * Queue signal based events. We never clear SIGHUP or SIGTERM events, * so that we just keep returning them until the editor dies. */ clp = CLP(sp); retest: if (LF_ISSET(EC_INTERRUPT) || F_ISSET(clp, CL_SIGINT)) { if (F_ISSET(clp, CL_SIGINT)) { F_CLR(clp, CL_SIGINT); evp->e_event = E_INTERRUPT; } else evp->e_event = E_TIMEOUT; return (0); } if (F_ISSET(clp, CL_SIGHUP | CL_SIGTERM | CL_SIGWINCH)) { if (F_ISSET(clp, CL_SIGHUP)) { evp->e_event = E_SIGHUP; return (0); } if (F_ISSET(clp, CL_SIGTERM)) { evp->e_event = E_SIGTERM; return (0); } if (F_ISSET(clp, CL_SIGWINCH)) { F_CLR(clp, CL_SIGWINCH); if (cl_ssize(sp, 1, &lines, &columns, &changed)) return (1); if (changed) { (void)cl_resize(sp, lines, columns); evp->e_event = E_WRESIZE; return (0); } /* No real change, ignore the signal. */ } } /* Set timer. */ if (ms == 0) tp = NULL; else { t.tv_sec = ms / 1000; t.tv_usec = (ms % 1000) * 1000; tp = &t; } /* Read input characters. */ switch (cl_read(sp, LF_ISSET(EC_QUOTED | EC_RAW), clp->ibuf, sizeof(clp->ibuf), &nr, tp)) { case INP_OK: evp->e_csp = clp->ibuf; evp->e_len = nr; evp->e_event = E_STRING; break; case INP_EOF: evp->e_event = E_EOF; break; case INP_ERR: evp->e_event = E_ERR; break; case INP_INTR: goto retest; case INP_TIMEOUT: evp->e_event = E_TIMEOUT; break; default: abort(); } return (0); } /* Call this before any read from a file */ static void block_for_read(fd) int fd; { fd_set fds; FD_ZERO(&fds); FD_SET(fd, &fds); mega_select(fd+1, &fds, NULL, NULL, NULL); } /* * cl_read -- * Read characters from the input. */ static input_t cl_read(sp, flags, bp, blen, nrp, tp) SCR *sp; u_int32_t flags; CHAR_T *bp; size_t blen; int *nrp; struct timeval *tp; { struct termios term1, term2; struct timeval poll; CL_PRIVATE *clp; GS *gp; SCR *tsp; fd_set rdfd; input_t rval; int maxfd, nr, term_reset; gp = sp->gp; clp = CLP(sp); term_reset = 0; /* * 1: A read from a file or a pipe. In this case, the reads * never timeout regardless. This means that we can hang * when trying to complete a map, but we're going to hang * on the next read anyway. */ if (!F_ISSET(clp, CL_STDIN_TTY)) { block_for_read(STDIN_FILENO); switch (nr = read(STDIN_FILENO, bp, blen)) { case 0: return (INP_EOF); case -1: goto err; default: *nrp = nr; return (INP_OK); } /* NOTREACHED */ } /* * 2: A read with an associated timeout, e.g., trying to complete * a map sequence. If input exists, we fall into #3. */ FD_ZERO(&rdfd); poll.tv_sec = 0; poll.tv_usec = 0; if (tp != NULL) { FD_SET(STDIN_FILENO, &rdfd); switch (mega_select(STDIN_FILENO + 1, &rdfd, NULL, NULL, tp == NULL ? &poll : tp)) { case 0: return (INP_TIMEOUT); case -1: goto err; default: break; } } /* * The user can enter a key in the editor to quote a character. If we * get here and the next key is supposed to be quoted, do what we can. * Reset the tty so that the user can enter a ^C, ^Q, ^S. There's an * obvious race here, when the key has already been entered, but there's * nothing that we can do to fix that problem. * * The editor can ask for the next literal character even thought it's * generally running in line-at-a-time mode. Do what we can. */ if (LF_ISSET(EC_QUOTED | EC_RAW) && !tcgetattr(STDIN_FILENO, &term1)) { term_reset = 1; if (LF_ISSET(EC_QUOTED)) { term2 = term1; term2.c_lflag &= ~ISIG; term2.c_iflag &= ~(IXON | IXOFF); (void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &term2); } else (void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &clp->vi_enter); } /* * 3: Wait for input. * * Select on the command input and scripting window file descriptors. * It's ugly that we wait on scripting file descriptors here, but it's * the only way to keep from locking out scripting windows. */ if (F_ISSET(gp, G_SCRWIN)) { loop: FD_ZERO(&rdfd); FD_SET(STDIN_FILENO, &rdfd); maxfd = STDIN_FILENO; for (tsp = gp->dq.cqh_first; tsp != (void *)&gp->dq; tsp = tsp->q.cqe_next) if (F_ISSET(sp, SC_SCRIPT)) { FD_SET(sp->script->sh_master, &rdfd); if (sp->script->sh_master > maxfd) maxfd = sp->script->sh_master; } switch (mega_select(maxfd + 1, &rdfd, NULL, NULL, NULL)) { case 0: abort(); case -1: goto err; default: break; } if (!FD_ISSET(STDIN_FILENO, &rdfd)) { if (sscr_input(sp)) return (INP_ERR); goto loop; } } /* * 4: Read the input. * * !!! * What's going on here is some scary stuff. Ex runs the terminal in * canonical mode. So, the character terminating a line of * input is returned in the buffer, but a trailing character is * not similarly included. As ex uses 0 and ^ as autoindent * commands, it has to see the trailing characters to determine * the difference between the user entering "0ab" and "0ab". We * leave an extra slot in the buffer, so that we can add a trailing * character if the buffer isn't terminated by a . We * lose if the buffer is too small for the line and exactly N characters * are entered followed by an character. */ #define ONE_FOR_EOF 1 block_for_read(STDIN_FILENO); switch (nr = read(STDIN_FILENO, bp, blen - ONE_FOR_EOF)) { case 0: /* EOF. */ /* * ^D in canonical mode returns a read of 0, i.e. EOF. EOF is * a valid command, but we don't want to loop forever because * the terminal driver is returning EOF because the user has * disconnected. The editor will almost certainly try to write * something before this fires, which should kill us, but You * Never Know. */ if (++clp->eof_count < 50) { bp[0] = clp->orig.c_cc[VEOF]; *nrp = 1; rval = INP_OK; } else rval = INP_EOF; break; case -1: /* Error or interrupt. */ err: if (errno == EINTR) rval = INP_INTR; else { rval = INP_ERR; msgq(sp, M_SYSERR, "input"); } break; default: /* Input characters. */ if (F_ISSET(sp, SC_EX) && bp[nr - 1] != '\n') bp[nr++] = clp->orig.c_cc[VEOF]; *nrp = nr; clp->eof_count = 0; rval = INP_OK; break; } /* Restore the terminal state if it was modified. */ if (term_reset) (void)tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &term1); return (rval); } /* * cl_resize -- * Reset the options for a resize event. */ static int cl_resize(sp, lines, columns) SCR *sp; size_t lines, columns; { ARGS *argv[2], a, b; char b1[1024]; a.bp = b1; b.bp = NULL; a.len = b.len = 0; argv[0] = &a; argv[1] = &b; (void)snprintf(b1, sizeof(b1), "lines=%lu", (u_long)lines); a.len = strlen(b1); if (opts_set(sp, argv, NULL)) return (1); (void)snprintf(b1, sizeof(b1), "columns=%lu", (u_long)columns); a.len = strlen(b1); if (opts_set(sp, argv, NULL)) return (1); return (0); } vigor-0.016.orig/cl/cl_screen.c0100644000076400007640000003367207103707235015004 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cl_screen.c 10.49 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "cl.h" static int cl_ex_end __P((GS *)); static int cl_ex_init __P((SCR *)); static void cl_freecap __P((CL_PRIVATE *)); static int cl_vi_end __P((GS *)); static int cl_vi_init __P((SCR *)); static int cl_putenv __P((char *, char *, u_long)); /* * cl_screen -- * Switch screen types. * * PUBLIC: int cl_screen __P((SCR *, u_int32_t)); */ int cl_screen(sp, flags) SCR *sp; u_int32_t flags; { CL_PRIVATE *clp; GS *gp; gp = sp->gp; clp = CLP(sp); /* See if the current information is incorrect. */ if (F_ISSET(gp, G_SRESTART)) { if (cl_quit(gp)) return (1); F_CLR(gp, G_SRESTART); } /* See if we're already in the right mode. */ if (LF_ISSET(SC_EX) && F_ISSET(sp, SC_SCR_EX) || LF_ISSET(SC_VI) && F_ISSET(sp, SC_SCR_VI)) return (0); /* * Fake leaving ex mode. * * We don't actually exit ex or vi mode unless forced (e.g. by a window * size change). This is because many curses implementations can't be * called twice in a single program. Plus, it's faster. If the editor * "leaves" vi to enter ex, when it exits ex we'll just fall back into * vi. */ if (F_ISSET(sp, SC_SCR_EX)) F_CLR(sp, SC_SCR_EX); /* * Fake leaving vi mode. * * Clear out the rest of the screen if we're in the middle of a split * screen. Move to the last line in the current screen -- this makes * terminal scrolling happen naturally. Note: *don't* move past the * end of the screen, as there are ex commands (e.g., :read ! cat file) * that don't want to. Don't clear the info line, its contents may be * valid, e.g. :file|append. */ if (F_ISSET(sp, SC_SCR_VI)) { F_CLR(sp, SC_SCR_VI); if (sp->q.cqe_next != (void *)&gp->dq) { (void)move(RLNO(sp, sp->rows), 0); clrtobot(); } (void)move(RLNO(sp, sp->rows) - 1, 0); refresh(); } /* Enter the requested mode. */ if (LF_ISSET(SC_EX)) { if (cl_ex_init(sp)) return (1); F_SET(clp, CL_IN_EX | CL_SCR_EX_INIT); /* * If doing an ex screen for ex mode, move to the last line * on the screen. */ if (F_ISSET(sp, SC_EX) && clp->cup != NULL) tputs(tgoto(clp->cup, 0, O_VAL(sp, O_LINES) - 1), 1, cl_putchar); } else { if (cl_vi_init(sp)) return (1); F_CLR(clp, CL_IN_EX); F_SET(clp, CL_SCR_VI_INIT); } return (0); } /* * cl_quit -- * Shutdown the screens. * * PUBLIC: int cl_quit __P((GS *)); */ int cl_quit(gp) GS *gp; { CL_PRIVATE *clp; int rval; rval = 0; clp = GCLP(gp); /* * If we weren't really running, ignore it. This happens if the * screen changes size before we've called curses. */ if (!F_ISSET(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT)) return (0); /* Clean up the terminal mappings. */ if (cl_term_end(gp)) rval = 1; /* Really leave vi mode. */ if (F_ISSET(clp, CL_STDIN_TTY) && F_ISSET(clp, CL_SCR_VI_INIT) && cl_vi_end(gp)) rval = 1; /* Really leave ex mode. */ if (F_ISSET(clp, CL_STDIN_TTY) && F_ISSET(clp, CL_SCR_EX_INIT) && cl_ex_end(gp)) rval = 1; /* * If we were running ex when we quit, or we're using an implementation * of curses where endwin() doesn't get this right, restore the original * terminal modes. * * XXX * We always do this because it's too hard to figure out what curses * implementations get it wrong. It may discard type-ahead characters * from the tty queue. */ (void)tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->orig); F_CLR(clp, CL_SCR_EX_INIT | CL_SCR_VI_INIT); return (rval); } /* * cl_vi_init -- * Initialize the curses vi screen. */ static int cl_vi_init(sp) SCR *sp; { CL_PRIVATE *clp; GS *gp; char *o_cols, *o_lines, *o_term, *ttype; gp = sp->gp; clp = CLP(sp); /* If already initialized, just set the terminal modes. */ if (F_ISSET(clp, CL_SCR_VI_INIT)) goto fast; /* Curses vi always reads from (and writes to) a terminal. */ if (!F_ISSET(clp, CL_STDIN_TTY) || !isatty(STDOUT_FILENO)) { msgq(sp, M_ERR, "016|Vi's standard input and output must be a terminal"); return (1); } /* We'll need a terminal type. */ if (opts_empty(sp, O_TERM, 0)) return (1); ttype = O_STR(sp, O_TERM); /* * XXX * Changing the row/column and terminal values is done by putting them * into the environment, which is then read by curses. What this loses * in ugliness, it makes up for in stupidity. We can't simply put the * values into the environment ourselves, because in the presence of a * kernel mechanism for returning the window size, entering values into * the environment will screw up future screen resizing events, e.g. if * the user enters a :shell command and then resizes their window. So, * if they weren't already in the environment, we make sure to delete * them immediately after setting them. * * XXX * Putting the TERM variable into the environment is necessary, even * though we're using newterm() here. We may be using initscr() as * the underlying function. */ o_term = getenv("TERM"); cl_putenv("TERM", ttype, 0); o_lines = getenv("LINES"); cl_putenv("LINES", NULL, (u_long)O_VAL(sp, O_LINES)); o_cols = getenv("COLUMNS"); cl_putenv("COLUMNS", NULL, (u_long)O_VAL(sp, O_COLUMNS)); /* * We don't care about the SCREEN reference returned by newterm, we * never have more than one SCREEN at a time. * * XXX * The SunOS initscr() can't be called twice. Don't even think about * using it. It fails in subtle ways (e.g. select(2) on fileno(stdin) * stops working). (The SVID notes that applications should only call * initscr() once.) * * XXX * The HP/UX newterm doesn't support the NULL first argument, so we * have to specify the terminal type. */ errno = 0; if (newterm(ttype, stdout, stdin) == NULL) { if (errno) msgq(sp, M_SYSERR, "%s", ttype); else msgq(sp, M_ERR, "%s: unknown terminal type", ttype); return (1); } if (o_term == NULL) unsetenv("TERM"); if (o_lines == NULL) unsetenv("LINES"); if (o_cols == NULL) unsetenv("COLUMNS"); /* * XXX * Someone got let out alone without adult supervision -- the SunOS * newterm resets the signal handlers. There's a race, but it's not * worth closing. */ (void)sig_init(sp->gp, sp); /* * We use raw mode. What we want is 8-bit clean, however, signals * and flow control should continue to work. Admittedly, it sounds * like cbreak, but it isn't. Using cbreak() can get you additional * things like IEXTEN, which turns on flags like DISCARD and LNEXT. * * !!! * If raw isn't turning off echo and newlines, something's wrong. * However, it shouldn't hurt. */ noecho(); /* No character echo. */ nonl(); /* No CR/NL translation. */ raw(); /* 8-bit clean. */ idlok(stdscr, 1); /* Use hardware insert/delete line. */ /* Put the cursor keys into application mode. */ (void)keypad(stdscr, TRUE); /* * XXX * The screen TI sequence just got sent. See the comment in * cl_funcs.c:cl_attr(). */ clp->ti_te = TI_SENT; /* * XXX * Historic implementations of curses handled SIGTSTP signals * in one of three ways. They either: * * 1: Set their own handler, regardless. * 2: Did not set a handler if a handler was already installed. * 3: Set their own handler, but then called any previously set * handler after completing their own cleanup. * * We don't try and figure out which behavior is in place, we force * it to SIG_DFL after initializing the curses interface, which means * that curses isn't going to take the signal. Since curses isn't * reentrant (i.e., the whole curses SIGTSTP interface is a fantasy), * we're doing The Right Thing. */ (void)signal(SIGTSTP, SIG_DFL); /* * If flow control was on, turn it back on. Turn signals on. ISIG * turns on VINTR, VQUIT, VDSUSP and VSUSP. The main curses code * already installed a handler for VINTR. We're going to disable the * other three. * * XXX * We want to use ^Y as a vi scrolling command. If the user has the * DSUSP character set to ^Y (common practice) clean it up. As it's * equally possible that the user has VDSUSP set to 'a', we disable * it regardless. It doesn't make much sense to suspend vi at read, * so I don't think anyone will care. Alternatively, we could look * it up in the table of legal command characters and turn it off if * it matches one. VDSUSP wasn't in POSIX 1003.1-1990, so we test for * it. * * XXX * We don't check to see if the user had signals enabled originally. * If they didn't, it's unclear what we're supposed to do here, but * it's also pretty unlikely. */ if (tcgetattr(STDIN_FILENO, &clp->vi_enter)) { msgq(sp, M_SYSERR, "tcgetattr"); goto err; } if (clp->orig.c_iflag & IXON) clp->vi_enter.c_iflag |= IXON; if (clp->orig.c_iflag & IXOFF) clp->vi_enter.c_iflag |= IXOFF; clp->vi_enter.c_lflag |= ISIG; #ifdef VDSUSP clp->vi_enter.c_cc[VDSUSP] = _POSIX_VDISABLE; #endif clp->vi_enter.c_cc[VQUIT] = _POSIX_VDISABLE; clp->vi_enter.c_cc[VSUSP] = _POSIX_VDISABLE; /* * XXX * OSF/1 doesn't turn off the , or * characters when curses switches into raw mode. It should be OK * to do it explicitly for everyone. */ #ifdef VDISCARD clp->vi_enter.c_cc[VDISCARD] = _POSIX_VDISABLE; #endif #ifdef VLNEXT clp->vi_enter.c_cc[VLNEXT] = _POSIX_VDISABLE; #endif #ifdef VSTATUS clp->vi_enter.c_cc[VSTATUS] = _POSIX_VDISABLE; #endif /* Initialize terminal based information. */ if (cl_term_init(sp)) goto err; fast: /* Set the terminal modes. */ if (tcsetattr(STDIN_FILENO, TCSASOFT | TCSADRAIN, &clp->vi_enter)) { msgq(sp, M_SYSERR, "tcsetattr"); err: (void)cl_vi_end(sp->gp); return (1); } return (0); } /* * cl_vi_end -- * Shutdown the vi screen. */ static int cl_vi_end(gp) GS *gp; { CL_PRIVATE *clp; clp = GCLP(gp); /* Restore the cursor keys to normal mode. */ (void)keypad(stdscr, FALSE); /* * If we were running vi when we quit, scroll the screen up a single * line so we don't lose any information. * * Move to the bottom of the window (some endwin implementations don't * do this for you). */ if (!F_ISSET(clp, CL_IN_EX)) { (void)move(0, 0); (void)deleteln(); (void)move(LINES - 1, 0); (void)refresh(); } cl_freecap(clp); /* End curses window. */ (void)endwin(); /* * XXX * The screen TE sequence just got sent. See the comment in * cl_funcs.c:cl_attr(). */ clp->ti_te = TE_SENT; return (0); } /* * cl_ex_init -- * Initialize the ex screen. */ static int cl_ex_init(sp) SCR *sp; { CL_PRIVATE *clp; clp = CLP(sp); /* If already initialized, just set the terminal modes. */ if (F_ISSET(clp, CL_SCR_EX_INIT)) goto fast; /* If not reading from a file, we're done. */ if (!F_ISSET(clp, CL_STDIN_TTY)) return (0); /* Get the ex termcap/terminfo strings. */ (void)cl_getcap(sp, "cup", &clp->cup); (void)cl_getcap(sp, "smso", &clp->smso); (void)cl_getcap(sp, "rmso", &clp->rmso); (void)cl_getcap(sp, "el", &clp->el); (void)cl_getcap(sp, "cuu1", &clp->cuu1); /* Enter_standout_mode and exit_standout_mode are paired. */ if (clp->smso == NULL || clp->rmso == NULL) { if (clp->smso != NULL) { free(clp->smso); clp->smso = NULL; } if (clp->rmso != NULL) { free(clp->rmso); clp->rmso = NULL; } } /* * Turn on canonical mode, with normal input and output processing. * Start with the original terminal settings as the user probably * had them (including any local extensions) set correctly for the * current terminal. * * !!! * We can't get everything that we need portably; for example, ONLCR, * mapping to on output isn't required * by POSIX 1003.1b-1993. If this turns out to be a problem, then * we'll either have to play some games on the mapping, or we'll have * to make all ex printf's output \r\n instead of \n. */ clp->ex_enter = clp->orig; clp->ex_enter.c_lflag |= ECHO | ECHOE | ECHOK | ICANON | IEXTEN | ISIG; #ifdef ECHOCTL clp->ex_enter.c_lflag |= ECHOCTL; #endif #ifdef ECHOKE clp->ex_enter.c_lflag |= ECHOKE; #endif clp->ex_enter.c_iflag |= ICRNL; clp->ex_enter.c_oflag |= OPOST; #ifdef ONLCR clp->ex_enter.c_oflag |= ONLCR; #endif fast: if (tcsetattr(STDIN_FILENO, TCSADRAIN | TCSASOFT, &clp->ex_enter)) { msgq(sp, M_SYSERR, "tcsetattr"); return (1); } return (0); } /* * cl_ex_end -- * Shutdown the ex screen. */ static int cl_ex_end(gp) GS *gp; { CL_PRIVATE *clp; clp = GCLP(gp); cl_freecap(clp); return (0); } /* * cl_getcap -- * Retrieve termcap/terminfo strings. * * PUBLIC: int cl_getcap __P((SCR *, char *, char **)); */ int cl_getcap(sp, name, elementp) SCR *sp; char *name, **elementp; { size_t len; char *t; if ((t = tigetstr(name)) != NULL && t != (char *)-1 && (len = strlen(t)) != 0) { MALLOC_RET(sp, *elementp, char *, len + 1); memmove(*elementp, t, len + 1); } return (0); } /* * cl_freecap -- * Free any allocated termcap/terminfo strings. */ static void cl_freecap(clp) CL_PRIVATE *clp; { if (clp->el != NULL) { free(clp->el); clp->el = NULL; } if (clp->cup != NULL) { free(clp->cup); clp->cup = NULL; } if (clp->cuu1 != NULL) { free(clp->cuu1); clp->cuu1 = NULL; } if (clp->rmso != NULL) { free(clp->rmso); clp->rmso = NULL; } if (clp->smso != NULL) { free(clp->smso); clp->smso = NULL; } } /* * cl_putenv -- * Put a value into the environment. */ static int cl_putenv(name, str, value) char *name, *str; u_long value; { char buf[40]; if (str == NULL) { (void)snprintf(buf, sizeof(buf), "%lu", value); return (setenv(name, buf, 1)); } else return (setenv(name, str, 1)); } vigor-0.016.orig/cl/cl_term.c0100644000076400007640000002475607103707235014477 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)cl_term.c 10.22 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "cl.h" static int cl_pfmap __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); /* * XXX * THIS REQUIRES THAT ALL SCREENS SHARE A TERMINAL TYPE. */ typedef struct _tklist { char *ts; /* Key's termcap string. */ char *output; /* Corresponding vi command. */ char *name; /* Name. */ u_char value; /* Special value (for lookup). */ } TKLIST; static TKLIST const c_tklist[] = { /* Command mappings. */ {"kil1", "O", "insert line"}, {"kdch1", "x", "delete character"}, {"kcud1", "j", "cursor down"}, {"kel", "D", "delete to eol"}, {"kind", "\004", "scroll down"}, /* ^D */ {"kll", "$", "go to eol"}, {"khome", "^", "go to sol"}, {"kich1", "i", "insert at cursor"}, {"kdl1", "dd", "delete line"}, {"kcub1", "h", "cursor left"}, {"knp", "\006", "page down"}, /* ^F */ {"kpp", "\002", "page up"}, /* ^B */ {"kri", "\025", "scroll up"}, /* ^U */ {"ked", "dG", "delete to end of screen"}, {"kcuf1", "l", "cursor right"}, {"kcuu1", "k", "cursor up"}, {NULL}, }; static TKLIST const m1_tklist[] = { /* Input mappings (lookup). */ {NULL}, }; static TKLIST const m2_tklist[] = { /* Input mappings (set or delete). */ {"kcud1", "\033ja", "cursor down"}, /* ^[ja */ {"kcub1", "\033ha", "cursor left"}, /* ^[ha */ {"kcuu1", "\033ka", "cursor up"}, /* ^[ka */ {"kcuf1", "\033la", "cursor right"}, /* ^[la */ {NULL}, }; /* * cl_term_init -- * Initialize the special keys defined by the termcap/terminfo entry. * * PUBLIC: int cl_term_init __P((SCR *)); */ int cl_term_init(sp) SCR *sp; { KEYLIST *kp; SEQ *qp; TKLIST const *tkp; char *t; /* Command mappings. */ for (tkp = c_tklist; tkp->name != NULL; ++tkp) { if ((t = tigetstr(tkp->ts)) == NULL || t == (char *)-1) continue; if (seq_set(sp, tkp->name, strlen(tkp->name), t, strlen(t), tkp->output, strlen(tkp->output), SEQ_COMMAND, SEQ_NOOVERWRITE | SEQ_SCREEN)) return (1); } /* Input mappings needing to be looked up. */ for (tkp = m1_tklist; tkp->name != NULL; ++tkp) { if ((t = tigetstr(tkp->ts)) == NULL || t == (char *)-1) continue; for (kp = keylist;; ++kp) if (kp->value == tkp->value) break; if (kp == NULL) continue; if (seq_set(sp, tkp->name, strlen(tkp->name), t, strlen(t), &kp->ch, 1, SEQ_INPUT, SEQ_NOOVERWRITE | SEQ_SCREEN)) return (1); } /* Input mappings that are already set or are text deletions. */ for (tkp = m2_tklist; tkp->name != NULL; ++tkp) { if ((t = tigetstr(tkp->ts)) == NULL || t == (char *)-1) continue; /* * !!! * Some terminals' keys send single * characters. This is okay in command mapping, but not okay * in input mapping. That combination is the only one we'll * ever see, hopefully, so kluge it here for now. */ if (!strcmp(t, "\b")) continue; if (tkp->output == NULL) { if (seq_set(sp, tkp->name, strlen(tkp->name), t, strlen(t), NULL, 0, SEQ_INPUT, SEQ_NOOVERWRITE | SEQ_SCREEN)) return (1); } else if (seq_set(sp, tkp->name, strlen(tkp->name), t, strlen(t), tkp->output, strlen(tkp->output), SEQ_INPUT, SEQ_NOOVERWRITE | SEQ_SCREEN)) return (1); } /* * Rework any function key mappings that were set before the * screen was initialized. */ for (qp = sp->gp->seqq.lh_first; qp != NULL; qp = qp->q.le_next) if (F_ISSET(qp, SEQ_FUNCMAP)) (void)cl_pfmap(sp, qp->stype, qp->input, qp->ilen, qp->output, qp->olen); return (0); } /* * cl_term_end -- * End the special keys defined by the termcap/terminfo entry. * * PUBLIC: int cl_term_end __P((GS *)); */ int cl_term_end(gp) GS *gp; { SEQ *qp, *nqp; /* Delete screen specific mappings. */ for (qp = gp->seqq.lh_first; qp != NULL; qp = nqp) { nqp = qp->q.le_next; if (F_ISSET(qp, SEQ_SCREEN)) (void)seq_mdel(qp); } return (0); } /* * cl_fmap -- * Map a function key. * * PUBLIC: int cl_fmap __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); */ int cl_fmap(sp, stype, from, flen, to, tlen) SCR *sp; seq_t stype; CHAR_T *from, *to; size_t flen, tlen; { /* Ignore until the screen is running, do the real work then. */ if (F_ISSET(sp, SC_VI) && !F_ISSET(sp, SC_SCR_VI)) return (0); if (F_ISSET(sp, SC_EX) && !F_ISSET(sp, SC_SCR_EX)) return (0); return (cl_pfmap(sp, stype, from, flen, to, tlen)); } /* * cl_pfmap -- * Map a function key (private version). */ static int cl_pfmap(sp, stype, from, flen, to, tlen) SCR *sp; seq_t stype; CHAR_T *from, *to; size_t flen, tlen; { size_t nlen; char *p, keyname[64]; (void)snprintf(keyname, sizeof(keyname), "kf%d", atoi(from + 1)); if ((p = tigetstr(keyname)) == NULL || p == (char *)-1 || strlen(p) == 0) p = NULL; if (p == NULL) { msgq_str(sp, M_ERR, from, "233|This terminal has no %s key"); return (1); } nlen = snprintf(keyname, sizeof(keyname), "function key %d", atoi(from + 1)); return (seq_set(sp, keyname, nlen, p, strlen(p), to, tlen, stype, SEQ_NOOVERWRITE | SEQ_SCREEN)); } /* * cl_optchange -- * Curses screen specific "option changed" routine. * * PUBLIC: int cl_optchange __P((SCR *, int, char *, u_long *)); */ int cl_optchange(sp, opt, str, valp) SCR *sp; int opt; char *str; u_long *valp; { CL_PRIVATE *clp; clp = CLP(sp); switch (opt) { case O_COLUMNS: case O_LINES: case O_TERM: /* * Changing the columns, lines or terminal require that * we restart the screen. */ F_SET(sp->gp, G_SRESTART); F_CLR(sp, SC_SCR_EX | SC_SCR_VI); break; case O_MESG: (void)cl_omesg(sp, clp, !*valp); break; case O_WINDOWNAME: if (*valp) { F_CLR(clp, CL_RENAME_OK); (void)cl_rename(sp, NULL, 0); } else { F_SET(clp, CL_RENAME_OK); /* * If the screen is live, i.e. we're not reading the * .exrc file, update the window. */ if (sp->frp != NULL && sp->frp->name != NULL) (void)cl_rename(sp, sp->frp->name, 1); } break; } return (0); } /* * cl_omesg -- * Turn the tty write permission on or off. * * PUBLIC: int cl_omesg __P((SCR *, CL_PRIVATE *, int)); */ int cl_omesg(sp, clp, on) SCR *sp; CL_PRIVATE *clp; int on; { struct stat sb; char *tty; /* Find the tty, get the current permissions. */ if ((tty = ttyname(STDERR_FILENO)) == NULL) { if (sp != NULL) msgq(sp, M_SYSERR, "stderr"); return (1); } if (stat(tty, &sb) < 0) { if (sp != NULL) msgq(sp, M_SYSERR, "%s", tty); return (1); } /* Save the original status if it's unknown. */ if (clp->tgw == TGW_UNKNOWN) clp->tgw = sb.st_mode & S_IWGRP ? TGW_SET : TGW_UNSET; /* Toggle the permissions. */ if (on) { if (chmod(tty, sb.st_mode | S_IWGRP) < 0) { if (sp != NULL) msgq(sp, M_SYSERR, "046|messages not turned on: %s", tty); return (1); } } else if (chmod(tty, sb.st_mode & ~S_IWGRP) < 0) { if (sp != NULL) msgq(sp, M_SYSERR, "045|messages not turned off: %s", tty); return (1); } return (0); } /* * cl_ssize -- * Return the terminal size. * * PUBLIC: int cl_ssize __P((SCR *, int, size_t *, size_t *, int *)); */ int cl_ssize(sp, sigwinch, rowp, colp, changedp) SCR *sp; int sigwinch; size_t *rowp, *colp; int *changedp; { #ifdef TIOCGWINSZ struct winsize win; #endif size_t col, row; int rval; char *p; /* Assume it's changed. */ if (changedp != NULL) *changedp = 1; /* * !!! * sp may be NULL. * * Get the screen rows and columns. If the values are wrong, it's * not a big deal -- as soon as the user sets them explicitly the * environment will be set and the screen package will use the new * values. * * Try TIOCGWINSZ. */ row = col = 0; #ifdef TIOCGWINSZ if (ioctl(STDERR_FILENO, TIOCGWINSZ, &win) != -1) { row = win.ws_row; col = win.ws_col; } #endif /* If here because of suspend or a signal, only trust TIOCGWINSZ. */ if (sigwinch) { /* * Somebody didn't get TIOCGWINSZ right, or has suspend * without window resizing support. The user just lost, * but there's nothing we can do. */ if (row == 0 || col == 0) { if (changedp != NULL) *changedp = 0; return (0); } /* * SunOS systems deliver SIGWINCH when windows are uncovered * as well as when they change size. In addition, we call * here when continuing after being suspended since the window * may have changed size. Since we don't want to background * all of the screens just because the window was uncovered, * ignore the signal if there's no change. */ if (sp != NULL && row == O_VAL(sp, O_LINES) && col == O_VAL(sp, O_COLUMNS)) { if (changedp != NULL) *changedp = 0; return (0); } if (rowp != NULL) *rowp = row; if (colp != NULL) *colp = col; return (0); } /* * !!! * If TIOCGWINSZ failed, or had entries of 0, try termcap. This * routine is called before any termcap or terminal information * has been set up. If there's no TERM environmental variable set, * let it go, at least ex can run. */ if (row == 0 || col == 0) { if ((p = getenv("TERM")) == NULL) goto noterm; if (row == 0) if ((rval = tigetnum("lines")) < 0) msgq(sp, M_SYSERR, "tigetnum: lines"); else row = rval; if (col == 0) if ((rval = tigetnum("cols")) < 0) msgq(sp, M_SYSERR, "tigetnum: cols"); else col = rval; } /* If nothing else, well, it's probably a VT100. */ noterm: if (row == 0) row = 24; if (col == 0) col = 80; /* * !!! * POSIX 1003.2 requires the environment to override everything. * Often, people can get nvi to stop messing up their screen by * deleting the LINES and COLUMNS environment variables from their * dot-files. */ if ((p = getenv("LINES")) != NULL) row = strtol(p, NULL, 10); if ((p = getenv("COLUMNS")) != NULL) col = strtol(p, NULL, 10); if (rowp != NULL) *rowp = row; if (colp != NULL) *colp = col; return (0); } /* * cl_putchar -- * Function version of putchar, for tputs. * * PUBLIC: int cl_putchar __P((int)); */ int cl_putchar(ch) int ch; { return (putchar(ch)); } vigor-0.016.orig/cl/tags0120777000076400007640000000000007107504605015743 2../build/tagsustar cjw44cjw44vigor-0.016.orig/ip_cl/0040755000076400007640000000000007103707236013364 5ustar cjw44cjw44vigor-0.016.orig/ip_cl/ip_cl.c0100644000076400007640000003157307103707236014624 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ip_cl.c 8.4 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../ip/ip.h" #include "pathnames.h" size_t cols, rows; /* Screen columns, rows. */ int die; /* Child died. */ int i_fd, o_fd; /* Input/output fd's. */ int resize; /* Window resized. */ void arg_format __P((int *, char **[], int, int)); void attach __P((void)); void ip_cur_end __P((void)); void ip_cur_init __P((void)); void ip_read __P((void)); void ip_resize __P((void)); int ip_send __P((char *, IP_BUF *)); void ip_siginit __P((void)); int ip_trans __P((char *, size_t, size_t *)); void nomem __P((void)); void onchld __P((int)); void onintr __P((int)); void onwinch __P((int)); void trace __P((const char *, ...)); void usage __P((void)); int main(argc, argv) int argc; char *argv[]; { fd_set fdset; pid_t pid; size_t blen, len, skip; int ch, nr, rpipe[2], wpipe[2]; char *bp; while ((ch = getopt(argc, argv, "D")) != EOF) switch (ch) { case 'D': attach(); break; case '?': default: usage(); } argc -= optind; argv += optind; /* * Open the communications pipes. The pipes are named from our * viewpoint, so we read from rpipe[0] and write to wpipe[1]. * Vi reads from wpipe[0], and writes to rpipe[1]. */ if (pipe(rpipe) == -1 || pipe(wpipe) == -1) { perror("ip_cl: pipe"); exit (1); } i_fd = rpipe[0]; o_fd = wpipe[1]; /* * Format our arguments, adding a -I to the list. The first file * descriptor to the -I argument is vi's input, and the second is * vi's output. */ arg_format(&argc, &argv, wpipe[0], rpipe[1]); /* Run vi. */ switch (pid = fork()) { case -1: /* Error. */ perror("ip_cl: fork"); exit (1); case 0: /* Vi. */ execv(VI, argv); perror("ip_cl: execv ../build/nvi"); exit (1); default: /* Ip_cl. */ break; } /* * Allocate initial input buffer. * XXX * We don't dynamically resize, so there better not be any individual * messages larger than this buffer. */ blen = 4 * 1024; if ((bp = malloc(blen)) == NULL) nomem(); /* Clear the file descriptor mask. */ FD_ZERO(&fdset); /* Initialize signals. */ ip_siginit(); /* Initialize the curses screen. */ ip_cur_init(); /* The first thing vi wants is the screen size. */ ip_resize(); /* Main loop. */ for (len = 0;;) { if (die) break; /* * XXX * Race #1: if there's an event coming from vi that requires * that we know what size the screen is, and we take a resize * signal, we'll differ from vi in the size of the screen for * that event. Fixing this will requires information attached * to message as to what set of state was in place when the * message was sent. Not hard, but not worth doing now. * * Race #2: we cycle, handling resize events until there aren't * any waiting. We then do a select. If the resize signal * arrives after we exit the loop but before we enter select, * we'll wait on the user to enter a keystroke, handle it and * then handle the resize. */ while (resize) { resize = 0; ip_resize(); ip_cur_end(); ip_cur_init(); } /* Wait until vi or the screen wants to talk. */ FD_SET(i_fd, &fdset); FD_SET(STDIN_FILENO, &fdset); errno = 0; switch (select(i_fd + 1, &fdset, NULL, NULL, NULL)) { case 0: abort(); /* Timeout. */ /* NOTREACHED */ case -1: if (errno == EINTR) continue; perror("ip_cl: select"); exit (1); default: break; } /* Read waiting tty characters and send them to vi. */ if (FD_ISSET(STDIN_FILENO, &fdset)) { ip_read(); continue; } /* Read waiting vi messages and translate to curses calls. */ switch (nr = read(i_fd, bp + len, blen - len)) { case 0: continue; case -1: perror("ip_cl: read"); exit (1); default: break; } /* Parse to data end or partial message. */ for (len += nr, skip = 0; len > skip && ip_trans(bp + skip, len - skip, &skip) == 1;); /* Copy any partial messages down in the buffer. */ len -= skip; if (len > 0) memmove(bp, bp + skip, len); } /* End the screen. */ ip_cur_end(); exit (0); } /* * ip_read -- * Read characters from the screen and send them to vi. */ void ip_read() { IP_BUF ipb; int nr; char bp[1024]; /* Read waiting tty characters. */ switch (nr = read(STDIN_FILENO, bp, sizeof(bp))) { case 0: return; case -1: perror("ip_cl: read"); exit (1); default: break; } ipb.code = IPO_STRING; ipb.len = nr; ipb.str = bp; ip_send("s", &ipb); } /* * ip_trans -- * Translate vi messages into curses calls. */ int ip_trans(bp, len, skipp) char *bp; size_t len, *skipp; { IP_BUF ipb; size_t cno, lno, nlen, oldy, oldx, spcnt; int ch; char *fmt, *p; switch (bp[0]) { case IPO_ADDSTR: case IPO_RENAME: fmt = "s"; break; case IPO_BUSY: fmt = "s1"; break; case IPO_ATTRIBUTE: case IPO_MOVE: fmt = "12"; break; case IPO_REWRITE: fmt = "1"; break; default: fmt = ""; } nlen = IPO_CODE_LEN; p = bp + IPO_CODE_LEN; for (; *fmt != '\0'; ++fmt) switch (*fmt) { case '1': nlen += IPO_INT_LEN; if (len < nlen) return (0); memcpy(&ipb.val1, p, IPO_INT_LEN); ipb.val1 = ntohl(ipb.val1); p += IPO_INT_LEN; break; case '2': nlen += IPO_INT_LEN; if (len < nlen) return (0); memcpy(&ipb.val2, p, IPO_INT_LEN); ipb.val2 = ntohl(ipb.val2); p += IPO_INT_LEN; break; case 's': nlen += IPO_INT_LEN; if (len < nlen) return (0); memcpy(&ipb.len, p, IPO_INT_LEN); ipb.len = ntohl(ipb.len); p += IPO_INT_LEN; nlen += ipb.len; if (len < nlen) return (0); ipb.str = p; p += ipb.len; break; } *skipp += nlen; switch (bp[0]) { case IPO_ADDSTR: #ifdef TR trace("addnstr {%.*s}\n", (int)ipb.len, ipb.str); #endif (void)addnstr(ipb.str, ipb.len); break; case IPO_ATTRIBUTE: switch (ipb.val1) { case SA_ALTERNATE: #ifdef TR trace("attr: alternate\n"); #endif /* * XXX * Nothing. */ break; case SA_INVERSE: #ifdef TR trace("attr: inverse\n"); #endif if (ipb.val2) (void)standout(); else (void)standend(); break; default: abort(); /* NOTREACHED */ } break; case IPO_BELL: #ifdef TR trace("bell\n"); #endif (void)write(1, "\007", 1); /* '\a' */ break; case IPO_BUSY: #ifdef TR trace("busy {%.*s}\n", (int)ipb.len, ipb.str); #endif /* * XXX * Nothing... * ip_busy(ipb.str, ipb.len); */ break; case IPO_CLRTOEOL: #ifdef TR trace("clrtoeol\n"); #endif clrtoeol(); break; case IPO_DELETELN: #ifdef TR trace("deleteln\n"); #endif deleteln(); break; case IPO_INSERTLN: #ifdef TR trace("insertln\n"); #endif insertln(); break; case IPO_MOVE: #ifdef TR trace("move: %lu %lu\n", (u_long)ipb.val1, (u_long)ipb.val2); #endif (void)move(ipb.val1, ipb.val2); break; case IPO_REDRAW: #ifdef TR trace("redraw\n"); #endif clearok(curscr, 1); refresh(); break; case IPO_REFRESH: #ifdef TR trace("refresh\n"); #endif refresh(); break; case IPO_RENAME: #ifdef TR trace("rename {%.*s}\n", (int)ipb.len, ipb.str); #endif /* * XXX * Nothing... * ip_rename(ipb.str, ipb.len); */ break; case IPO_REWRITE: #ifdef TR trace("rewrite {%lu}\n", (u_long)ipb.val1); #endif getyx(stdscr, oldy, oldx); for (lno = ipb.val1, cno = spcnt = 0;;) { (void)move(lno, cno); ch = winch(stdscr); if (isblank(ch)) ++spcnt; else { (void)move(lno, cno - spcnt); for (; spcnt > 0; --spcnt) (void)addch(' '); (void)addch(ch); } if (++cno >= cols) break; } (void)move(oldy, oldx); break; default: /* * XXX: Protocol is out of sync? */ abort(); } return (1); } /* * arg_format */ void arg_format(argcp, argvp, i_fd, o_fd) int *argcp, i_fd, o_fd; char **argvp[]; { char **largv, *iarg, *p; /* Get space for the argument array and the -I argument. */ if ((iarg = malloc(64)) == NULL || (largv = malloc((*argcp + 3) * sizeof(char *))) == NULL) { perror("ip_cl"); exit (1); } memcpy(largv + 2, *argvp, *argcp * sizeof(char *) + 1); /* Reset argv[0] to be the exec'd program. */ if ((p = strrchr(VI, '/')) == NULL) largv[0] = VI; else largv[0] = p + 1; /* Create the -I argument. */ (void)sprintf(iarg, "-I%d%s%d", i_fd, ".", o_fd); largv[1] = iarg; /* Reset the argument array. */ *argvp = largv; } /* * ip_cur_init -- * Initialize the curses screen. */ void ip_cur_init() { /* * XXX * This is 4BSD curses' specific -- if this is to be a real program * we'll have to do all the stuff that we do in the cl directory to * run with different curses variants. */ if (initscr() == ERR) { perror("ip_cl: initscr"); exit (1); } noecho(); nonl(); raw(); idlok(stdscr, 1); } /* * ip_cur_end -- * End the curses screen. */ void ip_cur_end() { (void)move(0, 0); (void)deleteln(); (void)move(rows - 1, 0); (void)refresh(); (void)endwin(); } /* * ip_siginit -- * Initialize the signals. */ void ip_siginit() { /* We need to know if vi dies horribly. */ (void)signal(SIGCHLD, onchld); /* We want to allow interruption at least for now. */ (void)signal(SIGINT, onintr); #ifdef SIGWINCH /* We need to know if the screen is resized. */ (void)signal(SIGWINCH, onwinch); #endif } /* * ip_resize -- * Send the window size. */ void ip_resize() { struct winsize win; IP_BUF ipb; if (ioctl(STDERR_FILENO, TIOCGWINSZ, &win) == -1) { perror("ip_cl: TIOCGWINSZ"); exit(1); } if (rows == win.ws_row && cols == win.ws_col) return; ipb.val1 = rows = win.ws_row; ipb.val2 = cols = win.ws_col; ipb.code = IPO_RESIZE; ip_send("12", &ipb); } /* * ip_send -- * Construct and send an IP buffer. */ int ip_send(fmt, ipbp) char *fmt; IP_BUF *ipbp; { static char *bp; static size_t blen; size_t off; u_int32_t ilen; int nlen, n, nw; char *p; if (blen == 0 && (bp = malloc(blen = 512)) == NULL) nomem(); p = bp; nlen = 0; *p++ = ipbp->code; nlen += IPO_CODE_LEN; if (fmt != NULL) for (; *fmt != '\0'; ++fmt) switch (*fmt) { case '1': /* Value 1. */ ilen = htonl(ipbp->val1); goto value; case '2': /* Value 2. */ ilen = htonl(ipbp->val2); value: nlen += IPO_INT_LEN; if (nlen >= blen) { blen = blen * 2 + nlen; off = p - bp; if ((bp = realloc(bp, blen)) == NULL) nomem(); p = bp + off; } memmove(p, &ilen, IPO_INT_LEN); p += IPO_INT_LEN; break; case 's': /* String. */ ilen = ipbp->len; /* XXX: conversion. */ ilen = htonl(ilen); nlen += IPO_INT_LEN + ipbp->len; if (nlen >= blen) { blen = blen * 2 + nlen; off = p - bp; if ((bp = realloc(bp, blen)) == NULL) nomem(); p = bp + off; } memmove(p, &ilen, IPO_INT_LEN); p += IPO_INT_LEN; memmove(p, ipbp->str, ipbp->len); p += ipbp->len; break; } #ifdef TR trace("WROTE: "); for (n = p - bp, p = bp; n > 0; --n, ++p) if (isprint(*p)) (void)trace("%c", *p); else trace("<%x>", (u_char)*p); trace("\n"); #endif for (n = p - bp, p = bp; n > 0; n -= nw, p += nw) if ((nw = write(o_fd, p, n)) < 0) { perror("ip_cl: write"); exit(1); } return (0); } void nomem() { perror("ip_cl"); exit (1); } /* * onchld -- * Handle SIGCHLD. */ void onchld(signo) int signo; { die = 1; #ifdef TR trace("SIGCHLD\n"); #endif /* Interrupt select if it's running. */ (void)kill(getpid(), SIGINT); } /* * onintr -- * Handle SIGINT. */ void onintr(signo) int signo; { /* * If we receive an interrupt, we may have sent it ourselves. * If not, die from the signal. */ if (die) return; (void)signal(SIGINT, SIG_DFL); kill(getpid(), SIGINT); } /* * onwinch -- * Handle SIGWINCH. */ void onwinch(signo) int signo; { resize = 1; } void attach() { int fd; char ch; (void)printf("process %lu waiting, enter to continue: ", (u_long)getpid()); (void)fflush(stdout); if ((fd = open(_PATH_TTY, O_RDONLY, 0)) < 0) { perror(_PATH_TTY); exit (1);; } do { if (read(fd, &ch, 1) != 1) { (void)close(fd); return; } } while (ch != '\n' && ch != '\r'); (void)close(fd); } #ifdef TR #ifdef __STDC__ #include #else #include #endif /* * TR -- * debugging trace routine. */ void #ifdef __STDC__ trace(const char *fmt, ...) #else trace(fmt, va_alist) char *fmt; va_dcl #endif { static FILE *tfp; va_list ap; if (tfp == NULL && (tfp = fopen(TR, "w")) == NULL) tfp = stderr; #ifdef __STDC__ va_start(ap, fmt); #else va_start(ap); #endif (void)vfprintf(tfp, fmt, ap); va_end(ap); (void)fflush(tfp); } #endif void usage() { (void)fprintf(stderr, "usage: ip_cl [-D]\n"); exit(1); } vigor-0.016.orig/ip_cl/Makefile0100644000076400007640000000056007103707236015022 0ustar cjw44cjw44# TR turns on tracing, to the specified file. TR= -DTR=\"/dev/ttypa\" #TR= -DTR=\"__log\" # VI is the binary that ip_cl runs. VI= -DVI=\"../build.local/nvi\" DEBUG= -DDEBUG -g INC= -I. -I../build.local -I../include CFLAGS= $(DEBUG) $(TR) $(VI) $(INC) OBJS= ip_cl.o LIBS= -lcurses -ltermcap ip_cl: ${OBJS} ${CC} ${OBJS} -o $@ ${LIBS} clean: rm -f ip_cl ${OBJS} vigor-0.016.orig/vi/0040755000076400007640000000000007103707315012712 5ustar cjw44cjw44vigor-0.016.orig/vi/v_at.c0100644000076400007640000000523707103707236014015 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_at.c 10.8 (Berkeley) 4/27/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_at -- @ * Execute a buffer. * * PUBLIC: int v_at __P((SCR *, VICMD *)); */ int v_at(sp, vp) SCR *sp; VICMD *vp; { CB *cbp; CHAR_T name; TEXT *tp; size_t len; char nbuf[20]; /* * !!! * Historically, [@*] and [@*][@*] executed the most * recently executed buffer in ex mode. In vi mode, only @@ repeated * the last buffer. We change historic practice and make @* work from * vi mode as well, it's simpler and more consistent. * * My intent is that *[buffer] will, in the future, pass the buffer to * whatever interpreter is loaded. */ name = F_ISSET(vp, VC_BUFFER) ? vp->buffer : '@'; if (name == '@' || name == '*') { if (!F_ISSET(sp, SC_AT_SET)) { ex_emsg(sp, NULL, EXM_NOPREVBUF); return (1); } name = sp->at_lbuf; } F_SET(sp, SC_AT_SET); CBNAME(sp, cbp, name); if (cbp == NULL) { ex_emsg(sp, KEY_NAME(sp, name), EXM_EMPTYBUF); return (1); } /* Save for reuse. */ sp->at_lbuf = name; /* * The buffer is executed in vi mode, while in vi mode, so simply * push it onto the terminal queue and continue. * * !!! * Historic practice is that if the buffer was cut in line mode, * were appended to each line as it was pushed onto * the stack. If the buffer was cut in character mode, * were appended to all lines but the last one. * * XXX * Historic practice is that execution of an @ buffer could be * undone by a single 'u' command, i.e. the changes were grouped * together. We don't get this right; I'm waiting for the new DB * logging code to be available. */ for (tp = cbp->textq.cqh_last; tp != (void *)&cbp->textq; tp = tp->q.cqe_prev) if ((F_ISSET(cbp, CB_LMODE) || tp->q.cqe_next != (void *)&cbp->textq) && v_event_push(sp, NULL, "\n", 1, 0) || v_event_push(sp, NULL, tp->lb, tp->len, 0)) return (1); /* * !!! * If any count was supplied, it applies to the first command in the * at buffer. */ if (F_ISSET(vp, VC_C1SET)) { len = snprintf(nbuf, sizeof(nbuf), "%lu", vp->count); if (v_event_push(sp, NULL, nbuf, len, 0)) return (1); } return (0); } vigor-0.016.orig/vi/v_ch.c0100644000076400007640000001257707103707236014010 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_ch.c 10.8 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static void notfound __P((SCR *, ARG_CHAR_T)); static void noprev __P((SCR *)); /* * v_chrepeat -- [count]; * Repeat the last F, f, T or t search. * * PUBLIC: int v_chrepeat __P((SCR *, VICMD *)); */ int v_chrepeat(sp, vp) SCR *sp; VICMD *vp; { vp->character = VIP(sp)->lastckey; switch (VIP(sp)->csearchdir) { case CNOTSET: noprev(sp); return (1); case FSEARCH: return (v_chF(sp, vp)); case fSEARCH: return (v_chf(sp, vp)); case TSEARCH: return (v_chT(sp, vp)); case tSEARCH: return (v_cht(sp, vp)); default: abort(); } /* NOTREACHED */ } /* * v_chrrepeat -- [count], * Repeat the last F, f, T or t search in the reverse direction. * * PUBLIC: int v_chrrepeat __P((SCR *, VICMD *)); */ int v_chrrepeat(sp, vp) SCR *sp; VICMD *vp; { cdir_t savedir; int rval; vp->character = VIP(sp)->lastckey; savedir = VIP(sp)->csearchdir; switch (VIP(sp)->csearchdir) { case CNOTSET: noprev(sp); return (1); case FSEARCH: rval = v_chf(sp, vp); break; case fSEARCH: rval = v_chF(sp, vp); break; case TSEARCH: rval = v_cht(sp, vp); break; case tSEARCH: rval = v_chT(sp, vp); break; default: abort(); } VIP(sp)->csearchdir = savedir; return (rval); } /* * v_cht -- [count]tc * Search forward in the line for the character before the next * occurrence of the specified character. * * PUBLIC: int v_cht __P((SCR *, VICMD *)); */ int v_cht(sp, vp) SCR *sp; VICMD *vp; { if (v_chf(sp, vp)) return (1); /* * v_chf places the cursor on the character, where the 't' * command wants it to its left. We know this is safe since * we had to move right for v_chf() to have succeeded. */ --vp->m_stop.cno; /* * Make any necessary correction to the motion decision made * by the v_chf routine. */ if (!ISMOTION(vp)) vp->m_final = vp->m_stop; VIP(sp)->csearchdir = tSEARCH; return (0); } /* * v_chf -- [count]fc * Search forward in the line for the next occurrence of the * specified character. * * PUBLIC: int v_chf __P((SCR *, VICMD *)); */ int v_chf(sp, vp) SCR *sp; VICMD *vp; { size_t len; u_long cnt; int isempty, key; char *endp, *p, *startp; /* * !!! * If it's a dot command, it doesn't reset the key for which we're * searching, e.g. in "df1|f2|.|;", the ';' searches for a '2'. */ key = vp->character; if (!F_ISSET(vp, VC_ISDOT)) VIP(sp)->lastckey = key; VIP(sp)->csearchdir = fSEARCH; if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (isempty) goto empty; return (1); } if (len == 0) { empty: notfound(sp, key); return (1); } endp = (startp = p) + len; p += vp->m_start.cno; for (cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt--;) { while (++p < endp && *p != key); if (p == endp) { notfound(sp, key); return (1); } } vp->m_stop.cno = p - startp; /* * Non-motion commands move to the end of the range. * Delete and yank stay at the start, ignore others. */ vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; return (0); } /* * v_chT -- [count]Tc * Search backward in the line for the character after the next * occurrence of the specified character. * * PUBLIC: int v_chT __P((SCR *, VICMD *)); */ int v_chT(sp, vp) SCR *sp; VICMD *vp; { if (v_chF(sp, vp)) return (1); /* * v_chF places the cursor on the character, where the 'T' * command wants it to its right. We know this is safe since * we had to move left for v_chF() to have succeeded. */ ++vp->m_stop.cno; vp->m_final = vp->m_stop; VIP(sp)->csearchdir = TSEARCH; return (0); } /* * v_chF -- [count]Fc * Search backward in the line for the next occurrence of the * specified character. * * PUBLIC: int v_chF __P((SCR *, VICMD *)); */ int v_chF(sp, vp) SCR *sp; VICMD *vp; { size_t len; u_long cnt; int isempty, key; char *endp, *p; /* * !!! * If it's a dot command, it doesn't reset the key for which * we're searching, e.g. in "df1|f2|.|;", the ';' searches * for a '2'. */ key = vp->character; if (!F_ISSET(vp, VC_ISDOT)) VIP(sp)->lastckey = key; VIP(sp)->csearchdir = FSEARCH; if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (isempty) goto empty; return (1); } if (len == 0) { empty: notfound(sp, key); return (1); } endp = p - 1; p += vp->m_start.cno; for (cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt--;) { while (--p > endp && *p != key); if (p == endp) { notfound(sp, key); return (1); } } vp->m_stop.cno = (p - endp) - 1; /* * All commands move to the end of the range. Motion commands * adjust the starting point to the character before the current * one. */ vp->m_final = vp->m_stop; if (ISMOTION(vp)) --vp->m_start.cno; return (0); } static void noprev(sp) SCR *sp; { msgq(sp, M_BERR, "178|No previous F, f, T or t search"); } static void notfound(sp, ch) SCR *sp; ARG_CHAR_T ch; { msgq(sp, M_BERR, "179|%s not found", KEY_NAME(sp, ch)); } vigor-0.016.orig/vi/v_cmd.c0100644000076400007640000003020507103707236014145 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_cmd.c 10.9 (Berkeley) 3/28/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * This array maps keystrokes to vi command functions. It is known * in ex/ex_usage.c that it takes four columns to name a vi character. */ VIKEYS const vikeys [MAXVIKEY + 1] = { /* 000 NUL -- The code in vi.c expects key 0 to be undefined. */ {NULL}, /* 001 ^A */ {v_searchw, V_ABS|V_CNT|V_MOVE|V_KEYW|VM_CUTREQ|VM_RCM_SET, "[count]^A", "^A search forward for cursor word"}, /* 002 ^B */ {v_pageup, V_CNT|VM_RCM_SET, "[count]^B", "^B scroll up by screens"}, /* 003 ^C */ {NULL, 0, "^C", "^C interrupt an operation (e.g. read, write, search)"}, /* 004 ^D */ {v_hpagedown, V_CNT|VM_RCM_SET, "[count]^D", "^D scroll down by half screens (setting count)"}, /* 005 ^E */ {v_linedown, V_CNT, "[count]^E", "^E scroll down by lines"}, /* 006 ^F */ {v_pagedown, V_CNT|VM_RCM_SET, "[count]^F", "^F scroll down by screens"}, /* 007 ^G */ {v_status, 0, "^G", "^G file status"}, /* 010 ^H */ {v_left, V_CNT|V_MOVE|VM_RCM_SET, "[count]^H", "^H move left by characters"}, /* 011 ^I */ {NULL}, /* 012 ^J */ {v_down, V_CNT|V_MOVE|VM_LMODE|VM_RCM, "[count]^J", "^J move down by lines"}, /* 013 ^K */ {NULL}, /* 014 ^L */ {v_redraw, 0, "^L", "^L redraw screen"}, /* 015 ^M */ {v_cr, V_CNT|V_MOVE|VM_LMODE|VM_RCM_SETFNB, "[count]^M", "^M move down by lines (to first non-blank)"}, /* 016 ^N */ {v_down, V_CNT|V_MOVE|VM_LMODE|VM_RCM, "[count]^N", "^N move down by lines"}, /* 017 ^O */ {NULL}, /* 020 ^P */ {v_up, V_CNT|V_MOVE|VM_LMODE|VM_RCM, "[count]^P", "^P move up by lines"}, /* 021 ^Q -- same as ^V if not used for hardware flow control. */ {NULL}, /* 022 ^R */ {v_redraw, 0, "^R", "^R redraw screen"}, /* 023 ^S -- not available, used for hardware flow control. */ {NULL}, /* 024 ^T */ {v_tagpop, V_ABS|VM_RCM_SET, "^T", "^T tag pop"}, /* 025 ^U */ {v_hpageup, V_CNT|VM_RCM_SET, "[count]^U", "^U half page up (set count)"}, /* 026 ^V */ {NULL, 0, "^V", "^V input a literal character"}, /* 027 ^W */ {v_screen, 0, "^W", "^W move to next screen"}, /* 030 ^X */ {NULL}, /* 031 ^Y */ {v_lineup, V_CNT, "[count]^Y", "^Y page up by lines"}, /* 032 ^Z */ {v_suspend, V_SECURE, "^Z", "^Z suspend editor"}, /* 033 ^[ */ {NULL, 0, "^[ ", "^[ exit input mode, cancel partial commands"}, /* 034 ^\ */ {v_exmode, 0, "^\\", " ^\\ switch to ex mode"}, /* 035 ^] */ {v_tagpush, V_ABS|V_KEYW|VM_RCM_SET, "^]", "^] tag push cursor word"}, /* 036 ^^ */ {v_switch, 0, "^^", "^^ switch to previous file"}, /* 037 ^_ */ {NULL}, /* 040 ' ' */ {v_right, V_CNT|V_MOVE|VM_RCM_SET, "[count]' '", " move right by columns"}, /* 041 ! */ {v_filter, V_CNT|V_DOT|V_MOTION|V_SECURE|VM_RCM_SET, "[count]![count]motion command(s)", " ! filter through command(s) to motion"}, /* 042 " */ {NULL}, /* 043 # */ {v_increment, V_CHAR|V_CNT|V_DOT|VM_RCM_SET, "[count]# +|-|#", " # number increment/decrement"}, /* 044 $ */ {v_dollar, V_CNT|V_MOVE|VM_RCM_SETLAST, " [count]$", " $ move to last column"}, /* 045 % */ {v_match, V_ABS|V_CNT|V_MOVE|VM_CUTREQ|VM_RCM_SET, "%", " % move to match"}, /* 046 & */ {v_again, 0, "&", " & repeat substitution"}, /* 047 ' */ {v_fmark, V_ABS_L|V_CHAR|V_MOVE|VM_LMODE|VM_RCM_SET, "'['a-z]", " ' move to mark (to first non-blank)"}, /* 050 ( */ {v_sentenceb, V_ABS|V_CNT|V_MOVE|VM_CUTREQ|VM_RCM_SET, "[count](", " ( move back sentence"}, /* 051 ) */ {v_sentencef, V_ABS|V_CNT|V_MOVE|VM_CUTREQ|VM_RCM_SET, "[count])", " ) move forward sentence"}, /* 052 * */ {NULL}, /* 053 + */ {v_down, V_CNT|V_MOVE|VM_LMODE|VM_RCM_SETFNB, "[count]+", " + move down by lines (to first non-blank)"}, /* 054 , */ {v_chrrepeat, V_CNT|V_MOVE|VM_RCM_SET, "[count],", " , reverse last F, f, T or t search"}, /* 055 - */ {v_up, V_CNT|V_MOVE|VM_LMODE|VM_RCM_SETFNB, "[count]-", " - move up by lines (to first non-blank)"}, /* 056 . */ {NULL, 0, ".", " . repeat the last command"}, /* 057 / */ {v_searchf, V_ABS_C|V_MOVE|VM_CUTREQ|VM_RCM_SET, "/RE[/ offset]", " / search forward"}, /* 060 0 */ {v_zero, V_MOVE|VM_RCM_SET, "0", " 0 move to first character"}, /* 061 1 */ {NULL}, /* 062 2 */ {NULL}, /* 063 3 */ {NULL}, /* 064 4 */ {NULL}, /* 065 5 */ {NULL}, /* 066 6 */ {NULL}, /* 067 7 */ {NULL}, /* 070 8 */ {NULL}, /* 071 9 */ {NULL}, /* 072 : */ {v_ex, 0, ":command [| command] ...", " : ex command"}, /* 073 ; */ {v_chrepeat, V_CNT|V_MOVE|VM_RCM_SET, "[count];", " ; repeat last F, f, T or t search"}, /* 074 < */ {v_shiftl, V_CNT|V_DOT|V_MOTION|VM_RCM_SET, "[count]<[count]motion", " < shift lines left to motion"}, /* 075 = */ {NULL}, /* 076 > */ {v_shiftr, V_CNT|V_DOT|V_MOTION|VM_RCM_SET, "[count]>[count]motion", " > shift lines right to motion"}, /* 077 ? */ {v_searchb, V_ABS_C|V_MOVE|VM_CUTREQ|VM_RCM_SET, "?RE[? offset]", " ? search backward"}, /* 100 @ */ {v_at, V_CNT|V_RBUF|VM_RCM_SET, "@buffer", " @ execute buffer"}, /* 101 A */ {v_iA, V_CNT|V_DOT|VM_RCM_SET, "[count]A", " A append to the line"}, /* 102 B */ {v_wordB, V_CNT|V_MOVE|VM_RCM_SET, "[count]B", " B move back bigword"}, /* 103 C */ {NULL, 0, "[buffer][count]C", " C change to end-of-line"}, /* 104 D */ {NULL, 0, "[buffer]D", " D delete to end-of-line"}, /* 105 E */ {v_wordE, V_CNT|V_MOVE|VM_RCM_SET, "[count]E", " E move to end of bigword"}, /* 106 F */ {v_chF, V_CHAR|V_CNT|V_MOVE|VM_RCM_SET, "[count]F character", " F character in line backward search"}, /* 107 G */ {v_lgoto, V_ABS_L|V_CNT|V_MOVE|VM_LMODE|VM_RCM_SETFNB, "[count]G", " G move to line"}, /* 110 H */ {v_home, V_ABS_L|V_CNT|V_MOVE|VM_LMODE|VM_RCM_SETNNB, "[count]H", " H move to count lines from screen top"}, /* 111 I */ {v_iI, V_CNT|V_DOT|VM_RCM_SET, "[count]I", " I insert before first nonblank"}, /* 112 J */ {v_join, V_CNT|V_DOT|VM_RCM_SET, "[count]J", " J join lines"}, /* 113 K */ {NULL}, /* 114 L */ {v_bottom, V_ABS_L|V_CNT|V_MOVE|VM_LMODE|VM_RCM_SETNNB, "[count]L", " L move to screen bottom"}, /* 115 M */ {v_middle, V_ABS_L|V_CNT|V_MOVE|VM_LMODE|VM_RCM_SETNNB, "M", " M move to screen middle"}, /* 116 N */ {v_searchN, V_ABS_C|V_MOVE|VM_CUTREQ|VM_RCM_SET, "n", " N reverse last search"}, /* 117 O */ {v_iO, V_CNT|V_DOT|VM_RCM_SET, "[count]O", " O insert above line"}, /* 120 P */ {v_Put, V_CNT|V_DOT|V_OBUF|VM_RCM_SET, "[buffer]P", " P insert before cursor from buffer"}, /* 121 Q */ {v_exmode, 0, "Q", " Q switch to ex mode"}, /* 122 R */ {v_Replace, V_CNT|V_DOT|VM_RCM_SET, "[count]R", " R replace characters"}, /* 123 S */ {NULL, 0, "[buffer][count]S", " S substitute for the line(s)"}, /* 124 T */ {v_chT, V_CHAR|V_CNT|V_MOVE|VM_RCM_SET, "[count]T character", " T before character in line backward search"}, /* 125 U */ {v_Undo, VM_RCM_SET, "U", " U Restore the current line"}, /* 126 V */ {NULL}, /* 127 W */ {v_wordW, V_CNT|V_MOVE|VM_RCM_SET, "[count]W", " W move to next bigword"}, /* 130 X */ {v_Xchar, V_CNT|V_DOT|V_OBUF|VM_RCM_SET, "[buffer][count]X", " X delete character before cursor"}, /* 131 Y */ {NULL, 0, "[buffer][count]Y", " Y copy line"}, /* 132 Z */ {v_zexit, 0, "ZZ", "ZZ save file and exit"}, /* 133 [ */ {v_sectionb, V_ABS|V_CNT|V_MOVE|VM_RCM_SET, "[[", "[[ move back section"}, /* 134 \ */ {NULL}, /* 135 ] */ {v_sectionf, V_ABS|V_CNT|V_MOVE|VM_RCM_SET, "]]", "]] move forward section"}, /* 136 ^ */ /* * DON'T set the VM_RCM_SETFNB flag, the function has to do the work * anyway, in case it's a motion component. DO set VM_RCM_SET, so * that any motion that's part of a command is preserved. */ {v_first, V_CNT|V_MOVE|VM_RCM_SET, "^", " ^ move to first non-blank"}, /* 137 _ */ /* * Needs both to set the VM_RCM_SETFNB flag, and to do the work * in the function, in case it's a delete. */ {v_cfirst, V_CNT|V_MOVE|VM_RCM_SETFNB, "_", " _ move to first non-blank"}, /* 140 ` */ {v_bmark, V_ABS_C|V_CHAR|V_MOVE|VM_CUTREQ|VM_RCM_SET, "`[`a-z]", " ` move to mark"}, /* 141 a */ {v_ia, V_CNT|V_DOT|VM_RCM_SET, "[count]a", " a append after cursor"}, /* 142 b */ {v_wordb, V_CNT|V_MOVE|VM_RCM_SET, "[count]b", " b move back word"}, /* 143 c */ {v_change, V_CNT|V_DOT|V_MOTION|V_OBUF|VM_RCM_SET, "[buffer][count]c[count]motion", " c change to motion"}, /* 144 d */ {v_delete, V_CNT|V_DOT|V_MOTION|V_OBUF|VM_RCM_SET, "[buffer][count]d[count]motion", " d delete to motion"}, /* 145 e */ {v_worde, V_CNT|V_MOVE|VM_RCM_SET, "[count]e", " e move to end of word"}, /* 146 f */ {v_chf, V_CHAR|V_CNT|V_MOVE|VM_RCM_SET, "[count]f character", " f character in line forward search"}, /* 147 g */ {NULL}, /* 150 h */ {v_left, V_CNT|V_MOVE|VM_RCM_SET, "[count]h", " h move left by columns"}, /* 151 i */ {v_ii, V_CNT|V_DOT|VM_RCM_SET, "[count]i", " i insert before cursor"}, /* 152 j */ {v_down, V_CNT|V_MOVE|VM_LMODE|VM_RCM, "[count]j", " j move down by lines"}, /* 153 k */ {v_up, V_CNT|V_MOVE|VM_LMODE|VM_RCM, "[count]k", " k move up by lines"}, /* 154 l */ {v_right, V_CNT|V_MOVE|VM_RCM_SET, "[count]l", " l move right by columns"}, /* 155 m */ {v_mark, V_CHAR, "m[a-z]", " m set mark"}, /* 156 n */ {v_searchn, V_ABS_C|V_MOVE|VM_CUTREQ|VM_RCM_SET, "n", " n repeat last search"}, /* 157 o */ {v_io, V_CNT|V_DOT|VM_RCM_SET, "[count]o", " o append after line"}, /* 160 p */ {v_put, V_CNT|V_DOT|V_OBUF|VM_RCM_SET, "[buffer]p", " p insert after cursor from buffer"}, /* 161 q */ {NULL}, /* 162 r */ {v_replace, V_CNT|V_DOT|VM_RCM_SET, "[count]r character", " r replace character"}, /* 163 s */ {v_subst, V_CNT|V_DOT|V_OBUF|VM_RCM_SET, "[buffer][count]s", " s substitute character"}, /* 164 t */ {v_cht, V_CHAR|V_CNT|V_MOVE|VM_RCM_SET, "[count]t character", " t before character in line forward search"}, /* 165 u */ /* * DON'T set the V_DOT flag, it' more complicated than that. * See vi/vi.c for details. */ {v_undo, VM_RCM_SET, "u", " u undo last change"}, /* 166 v */ {NULL}, /* 167 w */ {v_wordw, V_CNT|V_MOVE|VM_RCM_SET, "[count]w", " w move to next word"}, /* 170 x */ {v_xchar, V_CNT|V_DOT|V_OBUF|VM_RCM_SET, "[buffer][count]x", " x delete character"}, /* 171 y */ {v_yank, V_CNT|V_DOT|V_MOTION|V_OBUF|VM_RCM_SET, "[buffer][count]y[count]motion", " y copy text to motion into a cut buffer"}, /* 172 z */ /* * DON'T set the V_CHAR flag, the char isn't required, * so it's handled specially in getcmd(). */ {v_z, V_ABS_L|V_CNT|VM_RCM_SETFNB, "[line]z[window_size][-|.|+|^|]", " z reposition the screen"}, /* 173 { */ {v_paragraphb, V_ABS|V_CNT|V_MOVE|VM_CUTREQ|VM_RCM_SET, "[count]{", " { move back paragraph"}, /* 174 | */ {v_ncol, V_CNT|V_MOVE|VM_RCM_SET, "[count]|", " | move to column"}, /* 175 } */ {v_paragraphf, V_ABS|V_CNT|V_MOVE|VM_CUTREQ|VM_RCM_SET, "[count]}", " } move forward paragraph"}, /* 176 ~ */ {v_ulcase, V_CNT|V_DOT|VM_RCM_SET, "[count]~", " ~ reverse case"}, }; vigor-0.016.orig/vi/v_yank.c0100644000076400007640000000450707103707236014352 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_yank.c 10.9 (Berkeley) 5/19/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_yank -- [buffer][count]y[count][motion] * [buffer][count]Y * Yank text (or lines of text) into a cut buffer. * * !!! * Historic vi moved the cursor to the from MARK if it was before the current * cursor and on a different line, e.g., "yk" moves the cursor but "yj" and * "yl" do not. Unfortunately, it's too late to change this now. Matching * the historic semantics isn't easy. The line number was always changed and * column movement was usually relative. However, "y'a" moved the cursor to * the first non-blank of the line marked by a, while "y`a" moved the cursor * to the line and column marked by a. Hopefully, the motion component code * got it right... Unlike delete, we make no adjustments here. * * PUBLIC: int v_yank __P((SCR *, VICMD *)); */ int v_yank(sp, vp) SCR *sp; VICMD *vp; { size_t len; if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, F_ISSET(vp, VM_LMODE) ? CUT_LINEMODE : 0)) return (1); sp->rptlines[L_YANKED] += (vp->m_stop.lno - vp->m_start.lno) + 1; /* * One special correction, in case we've deleted the current line or * character. We check it here instead of checking in every command * that can be a motion component. */ if (db_get(sp, vp->m_final.lno, DBG_FATAL, NULL, &len)) return (1); /* * !!! * Cursor movements, other than those caused by a line mode command * moving to another line, historically reset the relative position. * * This currently matches the check made in v_delete(), I'm hoping * that they should be consistent... */ if (!F_ISSET(vp, VM_LMODE)) { F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SET); /* Make sure the set cursor position exists. */ if (vp->m_final.cno >= len) vp->m_final.cno = len ? len - 1 : 0; } return (0); } vigor-0.016.orig/vi/v_ex.c0100644000076400007640000003433007103707236014021 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_ex.c 10.42 (Berkeley) 6/28/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static int v_ecl __P((SCR *)); static int v_ecl_init __P((SCR *)); static int v_ecl_log __P((SCR *, TEXT *)); static int v_ex_done __P((SCR *, VICMD *)); static int v_exec_ex __P((SCR *, VICMD *, EXCMD *)); /* * v_again -- & * Repeat the previous substitution. * * PUBLIC: int v_again __P((SCR *, VICMD *)); */ int v_again(sp, vp) SCR *sp; VICMD *vp; { ARGS *ap[2], a; EXCMD cmd; ex_cinit(&cmd, C_SUBAGAIN, 2, vp->m_start.lno, vp->m_start.lno, 1, ap); ex_cadd(&cmd, &a, "", 1); return (v_exec_ex(sp, vp, &cmd)); } /* * v_exmode -- Q * Switch the editor into EX mode. * * PUBLIC: int v_exmode __P((SCR *, VICMD *)); */ int v_exmode(sp, vp) SCR *sp; VICMD *vp; { GS *gp; gp = sp->gp; /* Try and switch screens -- the screen may not permit it. */ if (gp->scr_screen(sp, SC_EX)) { msgq(sp, M_ERR, "207|The Q command requires the ex terminal interface"); return (1); } (void)gp->scr_attr(sp, SA_ALTERNATE, 0); /* Save the current cursor position. */ sp->frp->lno = sp->lno; sp->frp->cno = sp->cno; F_SET(sp->frp, FR_CURSORSET); /* Switch to ex mode. */ F_CLR(sp, SC_VI | SC_SCR_VI); F_SET(sp, SC_EX); /* Move out of the vi screen. */ (void)ex_puts(sp, "\n"); return (0); } /* * v_join -- [count]J * Join lines together. * * PUBLIC: int v_join __P((SCR *, VICMD *)); */ int v_join(sp, vp) SCR *sp; VICMD *vp; { EXCMD cmd; int lno; /* * YASC. * The general rule is that '#J' joins # lines, counting the current * line. However, 'J' and '1J' are the same as '2J', i.e. join the * current and next lines. This doesn't map well into the ex command * (which takes two line numbers), so we handle it here. Note that * we never test for EOF -- historically going past the end of file * worked just fine. */ lno = vp->m_start.lno + 1; if (F_ISSET(vp, VC_C1SET) && vp->count > 2) lno = vp->m_start.lno + (vp->count - 1); ex_cinit(&cmd, C_JOIN, 2, vp->m_start.lno, lno, 0, NULL); return (v_exec_ex(sp, vp, &cmd)); } /* * v_shiftl -- [count]m_start.lno, vp->m_stop.lno, 0, ap); ex_cadd(&cmd, &a, "<", 1); return (v_exec_ex(sp, vp, &cmd)); } /* * v_shiftr -- [count]>motion * Shift lines right. * * PUBLIC: int v_shiftr __P((SCR *, VICMD *)); */ int v_shiftr(sp, vp) SCR *sp; VICMD *vp; { ARGS *ap[2], a; EXCMD cmd; ex_cinit(&cmd, C_SHIFTR, 2, vp->m_start.lno, vp->m_stop.lno, 0, ap); ex_cadd(&cmd, &a, ">", 1); return (v_exec_ex(sp, vp, &cmd)); } /* * v_suspend -- ^Z * Suspend vi. * * PUBLIC: int v_suspend __P((SCR *, VICMD *)); */ int v_suspend(sp, vp) SCR *sp; VICMD *vp; { ARGS *ap[2], a; EXCMD cmd; ex_cinit(&cmd, C_STOP, 0, OOBLNO, OOBLNO, 0, ap); ex_cadd(&cmd, &a, "suspend", sizeof("suspend") - 1); return (v_exec_ex(sp, vp, &cmd)); } /* * v_switch -- ^^ * Switch to the previous file. * * PUBLIC: int v_switch __P((SCR *, VICMD *)); */ int v_switch(sp, vp) SCR *sp; VICMD *vp; { ARGS *ap[2], a; EXCMD cmd; char *name; /* * Try the alternate file name, then the previous file * name. Use the real name, not the user's current name. */ if ((name = sp->alt_name) == NULL) { msgq(sp, M_ERR, "180|No previous file to edit"); return (1); } /* If autowrite is set, write out the file. */ if (file_m1(sp, 0, FS_ALL)) return (1); ex_cinit(&cmd, C_EDIT, 0, OOBLNO, OOBLNO, 0, ap); ex_cadd(&cmd, &a, name, strlen(name)); return (v_exec_ex(sp, vp, &cmd)); } /* * v_tagpush -- ^[ * Do a tag search on the cursor keyword. * * PUBLIC: int v_tagpush __P((SCR *, VICMD *)); */ int v_tagpush(sp, vp) SCR *sp; VICMD *vp; { ARGS *ap[2], a; EXCMD cmd; ex_cinit(&cmd, C_TAG, 0, OOBLNO, 0, 0, ap); ex_cadd(&cmd, &a, VIP(sp)->keyw, strlen(VIP(sp)->keyw)); return (v_exec_ex(sp, vp, &cmd)); } /* * v_tagpop -- ^T * Pop the tags stack. * * PUBLIC: int v_tagpop __P((SCR *, VICMD *)); */ int v_tagpop(sp, vp) SCR *sp; VICMD *vp; { EXCMD cmd; ex_cinit(&cmd, C_TAGPOP, 0, OOBLNO, 0, 0, NULL); return (v_exec_ex(sp, vp, &cmd)); } /* * v_filter -- [count]!motion command(s) * Run range through shell commands, replacing text. * * PUBLIC: int v_filter __P((SCR *, VICMD *)); */ int v_filter(sp, vp) SCR *sp; VICMD *vp; { EXCMD cmd; TEXT *tp; /* * !!! * Historical vi permitted "!!" in an empty file, and it's handled * as a special case in the ex_bang routine. Don't modify this setup * without understanding that one. In particular, note that we're * manipulating the ex argument structures behind ex's back. * * !!! * Historical vi did not permit the '!' command to be associated with * a non-line oriented motion command, in general, although it did * with search commands. So, !f; and !w would fail, but !/; * would succeed, even if they all moved to the same location in the * current line. I don't see any reason to disallow '!' using any of * the possible motion commands. * * !!! * Historical vi ran the last bang command if N or n was used as the * search motion. */ if (F_ISSET(vp, VC_ISDOT) || ISCMD(vp->rkp, 'N') || ISCMD(vp->rkp, 'n')) { ex_cinit(&cmd, C_BANG, 2, vp->m_start.lno, vp->m_stop.lno, 0, NULL); EXP(sp)->argsoff = 0; /* XXX */ if (argv_exp1(sp, &cmd, "!", 1, 1)) return (1); cmd.argc = EXP(sp)->argsoff; /* XXX */ cmd.argv = EXP(sp)->args; /* XXX */ return (v_exec_ex(sp, vp, &cmd)); } /* Get the command from the user. */ if (v_tcmd(sp, vp, '!', TXT_BS | TXT_CR | TXT_ESCAPE | TXT_FILEC | TXT_PROMPT)) return (1); /* * Check to see if the user changed their mind. * * !!! * Entering on an empty line was historically an error, * this implementation doesn't bother. */ tp = sp->tiq.cqh_first; if (tp->term != TERM_OK) { vp->m_final.lno = sp->lno; vp->m_final.cno = sp->cno; return (0); } /* Home the cursor. */ vs_home(sp); ex_cinit(&cmd, C_BANG, 2, vp->m_start.lno, vp->m_stop.lno, 0, NULL); EXP(sp)->argsoff = 0; /* XXX */ if (argv_exp1(sp, &cmd, tp->lb + 1, tp->len - 1, 1)) return (1); cmd.argc = EXP(sp)->argsoff; /* XXX */ cmd.argv = EXP(sp)->args; /* XXX */ return (v_exec_ex(sp, vp, &cmd)); } /* * v_event_exec -- * Execute some command(s) based on an event. * * PUBLIC: int v_event_exec __P((SCR *, VICMD *)); */ int v_event_exec(sp, vp) SCR *sp; VICMD *vp; { EXCMD cmd; switch (vp->ev.e_event) { case E_QUIT: ex_cinit(&cmd, C_QUIT, 0, OOBLNO, OOBLNO, 0, NULL); break; case E_WRITE: ex_cinit(&cmd, C_WRITE, 0, OOBLNO, OOBLNO, 0, NULL); break; default: abort(); } return (v_exec_ex(sp, vp, &cmd)); } /* * v_exec_ex -- * Execute an ex command. */ static int v_exec_ex(sp, vp, exp) SCR *sp; VICMD *vp; EXCMD *exp; { int rval; rval = exp->cmd->fn(sp, exp); return (v_ex_done(sp, vp) || rval); } /* * v_ex -- : * Execute a colon command line. * * PUBLIC: int v_ex __P((SCR *, VICMD *)); */ int v_ex(sp, vp) SCR *sp; VICMD *vp; { GS *gp; TEXT *tp; int do_cedit, do_resolution, ifcontinue; gp = sp->gp; /* * !!! * If we put out more than a single line of messages, or ex trashes * the screen, the user may continue entering ex commands. We find * this out when we do the screen/message resolution. We can't enter * completely into ex mode however, because the user can elect to * return into vi mode by entering any key, i.e. we have to be in raw * mode. */ for (do_cedit = do_resolution = 0;;) { /* * !!! * There may already be an ex command waiting to run. If * so, we continue with it. */ if (!EXCMD_RUNNING(gp)) { /* Get a command. */ if (v_tcmd(sp, vp, ':', TXT_BS | TXT_CEDIT | TXT_FILEC | TXT_PROMPT)) return (1); tp = sp->tiq.cqh_first; /* * If the user entered a single , they want to * edit their colon command history. If they already * entered some text, move it into the edit history. */ if (tp->term == TERM_CEDIT) { if (tp->len > 1 && v_ecl_log(sp, tp)) return (1); do_cedit = 1; break; } /* If the user didn't enter anything, return. */ if (tp->term == TERM_BS) break; /* Log the command. */ if (O_STR(sp, O_CEDIT) != NULL && v_ecl_log(sp, tp)) return (1); /* Push a command on the command stack. */ if (ex_run_str(sp, NULL, tp->lb, tp->len, 0, 1)) return (1); } /* Home the cursor. */ vs_home(sp); /* * !!! * If the editor wrote the screen behind curses back, put out * a so that we don't overwrite the user's command * with its output or the next want-to-continue? message. This * doesn't belong here, but I can't find another place to put * it. See, we resolved the output from the last ex command, * and the user entered another one. This is the only place * where we have control before the ex command writes output. * We could get control in vs_msg(), but we have no way to know * if command didn't put out any output when we try and resolve * this command. This fixes a bug where combinations of ex * commands, e.g. ":set:!date:set" didn't look right. */ if (F_ISSET(sp, SC_SCR_EXWROTE)) (void)putchar('\n'); /* Call the ex parser. */ (void)ex_cmd(sp); /* Flush ex messages. */ (void)ex_fflush(sp); /* Resolve any messages. */ if (vs_ex_resolve(sp, &ifcontinue)) return (1); /* * Continue or return. If continuing, make sure that we * eventually do resolution. */ if (!ifcontinue) break; do_resolution = 1; /* If we're continuing, it's a new command. */ ++sp->ccnt; } /* * If the user previously continued an ex command, we have to do * resolution to clean up the screen. Don't wait, we already did * that. */ if (do_resolution) { F_SET(sp, SC_EX_WAIT_NO); if (vs_ex_resolve(sp, &ifcontinue)) return (1); } /* Cleanup from the ex command. */ if (v_ex_done(sp, vp)) return (1); /* The user may want to edit their colon command history. */ if (do_cedit) return (v_ecl(sp)); return (0); } /* * v_ex_done -- * Cleanup from an ex command. */ static int v_ex_done(sp, vp) SCR *sp; VICMD *vp; { size_t len; /* * The only cursor modifications are real, however, the underlying * line may have changed; don't trust anything. This code has been * a remarkably fertile place for bugs. Do a reality check on a * cursor value, and make sure it's okay. If necessary, change it. * Ex keeps track of the line number, but it cares less about the * column and it may have disappeared. * * Don't trust ANYTHING. * * XXX * Ex will soon have to start handling the column correctly; see * the POSIX 1003.2 standard. */ if (db_eget(sp, sp->lno, NULL, &len, NULL)) { sp->lno = 1; sp->cno = 0; } else if (sp->cno >= len) sp->cno = len ? len - 1 : 0; vp->m_final.lno = sp->lno; vp->m_final.cno = sp->cno; /* * Don't re-adjust the cursor after executing an ex command, * and ex movements are permanent. */ F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SET); return (0); } /* * v_ecl -- * Start an edit window on the colon command-line commands. */ static int v_ecl(sp) SCR *sp; { GS *gp; SCR *new; /* Initialize the screen, if necessary. */ gp = sp->gp; if (gp->ccl_sp == NULL && v_ecl_init(sp)) return (1); /* Get a new screen. */ if (screen_init(gp, sp, &new)) return (1); if (vs_split(sp, new, 1)) { (void)screen_end(new); return (1); } /* Attach to the screen. */ new->ep = gp->ccl_sp->ep; ++new->ep->refcnt; new->frp = gp->ccl_sp->frp; new->frp->flags = sp->frp->flags; /* Move the cursor to the end. */ (void)db_last(new, &new->lno); if (new->lno == 0) new->lno = 1; /* Remember the originating window. */ sp->ccl_parent = sp; /* It's a special window. */ F_SET(new, SC_COMEDIT); /* Set up the switch. */ sp->nextdisp = new; F_SET(sp, SC_SSWITCH); return (0); } /* * v_ecl_exec -- * Execute a command from a colon command-line window. * * PUBLIC: int v_ecl_exec __P((SCR *)); */ int v_ecl_exec(sp) SCR *sp; { size_t len; char *p; if (db_get(sp, sp->lno, 0, &p, &len) && sp->lno == 1) { v_emsg(sp, NULL, VIM_EMPTY); return (1); } if (len == 0) { msgq(sp, M_BERR, "307|No ex command to execute"); return (1); } /* Push the command on the command stack. */ if (ex_run_str(sp, NULL, p, len, 0, 0)) return (1); /* Set up the switch. */ sp->nextdisp = sp->ccl_parent; F_SET(sp, SC_EXIT); return (0); } /* * v_ecl_log -- * Log a command into the colon command-line log file. */ static int v_ecl_log(sp, tp) SCR *sp; TEXT *tp; { EXF *save_ep; recno_t lno; int rval; /* Initialize the screen, if necessary. */ if (sp->gp->ccl_sp == NULL && v_ecl_init(sp)) return (1); /* * Don't log colon command window commands into the colon command * window... */ if (sp->ep == sp->gp->ccl_sp->ep) return (0); /* * XXX * Swap the current EXF with the colon command file EXF. This * isn't pretty, but too many routines "know" that sp->ep points * to the current EXF. */ save_ep = sp->ep; sp->ep = sp->gp->ccl_sp->ep; if (db_last(sp, &lno)) { sp->ep = save_ep; return (1); } rval = db_append(sp, 0, lno, tp->lb, tp->len); sp->ep = save_ep; return (rval); } /* * v_ecl_init -- * Initialize the colon command-line log file. */ static int v_ecl_init(sp) SCR *sp; { FREF *frp; GS *gp; gp = sp->gp; /* Get a temporary file. */ if ((frp = file_add(sp, NULL)) == NULL) return (1); /* * XXX * Create a screen -- the file initialization code wants one. */ if (screen_init(gp, sp, &gp->ccl_sp)) return (1); if (file_init(gp->ccl_sp, frp, NULL, 0)) { (void)screen_end(gp->ccl_sp); return (1); } /* The underlying file isn't recoverable. */ F_CLR(gp->ccl_sp->ep, F_RCV_ON); return (0); } vigor-0.016.orig/vi/v_increment.c0100644000076400007640000001307507103707240015367 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_increment.c 10.12 (Berkeley) 3/19/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static char * const fmt[] = { #define DEC 0 "%ld", #define SDEC 1 "%+ld", #define HEXC 2 "0X%0*lX", #define HEXL 3 "0x%0*lx", #define OCTAL 4 "%#0*lo", }; static void inc_err __P((SCR *, enum nresult)); /* * v_increment -- [count]#[#+-] * Increment/decrement a keyword number. * * PUBLIC: int v_increment __P((SCR *, VICMD *)); */ int v_increment(sp, vp) SCR *sp; VICMD *vp; { enum nresult nret; u_long ulval; long change, ltmp, lval; size_t beg, blen, end, len, nlen, wlen; int base, isempty, rval; char *bp, *ntype, *p, *t, nbuf[100]; /* Validate the operator. */ if (vp->character == '#') vp->character = '+'; if (vp->character != '+' && vp->character != '-') { v_emsg(sp, vp->kp->usage, VIM_USAGE); return (1); } /* If new value set, save it off, but it has to fit in a long. */ if (F_ISSET(vp, VC_C1SET)) { if (vp->count > LONG_MAX) { inc_err(sp, NUM_OVER); return (1); } change = vp->count; } else change = 1; /* Get the line. */ if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (isempty) goto nonum; return (1); } /* * Skip any leading space before the number. Getting a cursor word * implies moving the cursor to its beginning, if we moved, refresh * now. */ for (beg = vp->m_start.cno; beg < len && isspace(p[beg]); ++beg); if (beg >= len) goto nonum; if (beg != vp->m_start.cno) { sp->cno = beg; (void)vs_refresh(sp, 0); } #undef ishex #define ishex(c) (isdigit(c) || strchr("abcdefABCDEF", c)) #undef isoctal #define isoctal(c) (isdigit(c) && (c) != '8' && (c) != '9') /* * Look for 0[Xx], or leading + or - signs, guess at the base. * The character after that must be a number. Wlen is set to * the remaining characters in the line that could be part of * the number. */ wlen = len - beg; if (p[beg] == '0' && wlen > 2 && (p[beg + 1] == 'X' || p[beg + 1] == 'x')) { base = 16; end = beg + 2; if (!ishex(p[end])) goto decimal; ntype = p[beg + 1] == 'X' ? fmt[HEXC] : fmt[HEXL]; } else if (p[beg] == '0' && wlen > 1) { base = 8; end = beg + 1; if (!isoctal(p[end])) goto decimal; ntype = fmt[OCTAL]; } else if (wlen >= 1 && (p[beg] == '+' || p[beg] == '-')) { base = 10; end = beg + 1; ntype = fmt[SDEC]; if (!isdigit(p[end])) goto nonum; } else { decimal: base = 10; end = beg; ntype = fmt[DEC]; if (!isdigit(p[end])) { nonum: msgq(sp, M_ERR, "181|Cursor not in a number"); return (1); } } /* Find the end of the word, possibly correcting the base. */ while (++end < len) { switch (base) { case 8: if (isoctal(p[end])) continue; if (p[end] == '8' || p[end] == '9') { base = 10; ntype = fmt[DEC]; continue; } break; case 10: if (isdigit(p[end])) continue; break; case 16: if (ishex(p[end])) continue; break; default: abort(); /* NOTREACHED */ } break; } wlen = (end - beg); /* * XXX * If the line was at the end of the buffer, we have to copy it * so we can guarantee that it's NULL-terminated. We make the * buffer big enough to fit the line changes as well, and only * allocate once. */ GET_SPACE_RET(sp, bp, blen, len + 50); if (end == len) { memmove(bp, &p[beg], wlen); bp[wlen] = '\0'; t = bp; } else t = &p[beg]; /* * Octal or hex deal in unsigned longs, everything else is done * in signed longs. */ if (base == 10) { if ((nret = nget_slong(&lval, t, NULL, 10)) != NUM_OK) goto err; ltmp = vp->character == '-' ? -change : change; if (lval > 0 && ltmp > 0 && !NPFITS(LONG_MAX, lval, ltmp)) { nret = NUM_OVER; goto err; } if (lval < 0 && ltmp < 0 && !NNFITS(LONG_MIN, lval, ltmp)) { nret = NUM_UNDER; goto err; } lval += ltmp; /* If we cross 0, signed numbers lose their sign. */ if (lval == 0 && ntype == fmt[SDEC]) ntype = fmt[DEC]; nlen = snprintf(nbuf, sizeof(nbuf), ntype, lval); } else { if ((nret = nget_uslong(&ulval, t, NULL, base)) != NUM_OK) goto err; if (vp->character == '+') { if (!NPFITS(ULONG_MAX, ulval, change)) { nret = NUM_OVER; goto err; } ulval += change; } else { if (ulval < change) { nret = NUM_UNDER; goto err; } ulval -= change; } /* Correct for literal "0[Xx]" in format. */ if (base == 16) wlen -= 2; nlen = snprintf(nbuf, sizeof(nbuf), ntype, wlen, ulval); } /* Build the new line. */ memmove(bp, p, beg); memmove(bp + beg, nbuf, nlen); memmove(bp + beg + nlen, p + end, len - beg - (end - beg)); len = beg + nlen + (len - beg - (end - beg)); nret = NUM_OK; rval = db_set(sp, vp->m_start.lno, bp, len); if (0) { err: rval = 1; inc_err(sp, nret); } if (bp != NULL) FREE_SPACE(sp, bp, blen); return (rval); } static void inc_err(sp, nret) SCR *sp; enum nresult nret; { switch (nret) { case NUM_ERR: break; case NUM_OK: abort(); /* NOREACHED */ case NUM_OVER: msgq(sp, M_ERR, "182|Resulting number too large"); break; case NUM_UNDER: msgq(sp, M_ERR, "183|Resulting number too small"); break; } } vigor-0.016.orig/vi/v_init.c0100644000076400007640000000457207103707240014350 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_init.c 10.8 (Berkeley) 3/30/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_screen_copy -- * Copy vi screen. * * PUBLIC: int v_screen_copy __P((SCR *, SCR *)); */ int v_screen_copy(orig, sp) SCR *orig, *sp; { VI_PRIVATE *ovip, *nvip; /* Create the private vi structure. */ CALLOC_RET(orig, nvip, VI_PRIVATE *, 1, sizeof(VI_PRIVATE)); sp->vi_private = nvip; /* Invalidate the line size cache. */ VI_SCR_CFLUSH(nvip); if (orig == NULL) { nvip->csearchdir = CNOTSET; } else { ovip = VIP(orig); /* User can replay the last input, but nothing else. */ if (ovip->rep_len != 0) { MALLOC_RET(orig, nvip->rep, EVENT *, ovip->rep_len); memmove(nvip->rep, ovip->rep, ovip->rep_len); nvip->rep_len = ovip->rep_len; } /* Copy the paragraph/section information. */ if (ovip->ps != NULL && (nvip->ps = v_strdup(sp, ovip->ps, strlen(ovip->ps))) == NULL) return (1); nvip->lastckey = ovip->lastckey; nvip->csearchdir = ovip->csearchdir; nvip->srows = ovip->srows; } return (0); } /* * v_screen_end -- * End a vi screen. * * PUBLIC: int v_screen_end __P((SCR *)); */ int v_screen_end(sp) SCR *sp; { VI_PRIVATE *vip; if ((vip = VIP(sp)) == NULL) return (0); if (vip->keyw != NULL) free(vip->keyw); if (vip->rep != NULL) free(vip->rep); if (vip->ps != NULL) free(vip->ps); if (HMAP != NULL) free(HMAP); free(vip); sp->vi_private = NULL; return (0); } /* * v_optchange -- * Handle change of options for vi. * * PUBLIC: int v_optchange __P((SCR *, int, char *, u_long *)); */ int v_optchange(sp, offset, str, valp) SCR *sp; int offset; char *str; u_long *valp; { switch (offset) { case O_PARAGRAPHS: return (v_buildps(sp, str, O_STR(sp, O_SECTIONS))); case O_SECTIONS: return (v_buildps(sp, O_STR(sp, O_PARAGRAPHS), str)); case O_WINDOW: return (vs_crel(sp, *valp)); } return (0); } vigor-0.016.orig/vi/v_itxt.c0100644000076400007640000003055507103707240014375 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_itxt.c 10.16 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * !!! * Repeated input in the historic vi is mostly wrong and this isn't very * backward compatible. For example, if the user entered "3Aab\ncd" in * the historic vi, the "ab" was repeated 3 times, and the "\ncd" was then * appended to the result. There was also a hack which I don't remember * right now, where "3o" would open 3 lines and then let the user fill them * in, to make screen movements on 300 baud modems more tolerable. I don't * think it's going to be missed. * * !!! * There's a problem with the way that we do logging for change commands with * implied motions (e.g. A, I, O, cc, etc.). Since the main vi loop logs the * starting cursor position before the change command "moves" the cursor, the * cursor position to which we return on undo will be where the user entered * the change command, not the start of the change. Several of the following * routines re-log the cursor to make this work correctly. Historic vi tried * to do the same thing, and mostly got it right. (The only spectacular way * it fails is if the user entered 'o' from anywhere but the last character of * the line, the undo returned the cursor to the start of the line. If the * user was on the last character of the line, the cursor returned to that * position.) We also check for mapped keys waiting, i.e. if we're in the * middle of a map, don't bother logging the cursor. */ #define LOG_CORRECT { \ if (!MAPPED_KEYS_WAITING(sp)) \ (void)log_cursor(sp); \ } static u_int32_t set_txt_std __P((SCR *, VICMD *, u_int32_t)); /* * v_iA -- [count]A * Append text to the end of the line. * * PUBLIC: int v_iA __P((SCR *, VICMD *)); */ int v_iA(sp, vp) SCR *sp; VICMD *vp; { size_t len; if (!db_get(sp, vp->m_start.lno, 0, NULL, &len)) sp->cno = len == 0 ? 0 : len - 1; LOG_CORRECT; return (v_ia(sp, vp)); } /* * v_ia -- [count]a * [count]A * Append text to the cursor position. * * PUBLIC: int v_ia __P((SCR *, VICMD *)); */ int v_ia(sp, vp) SCR *sp; VICMD *vp; { size_t len; u_int32_t flags; int isempty; char *p; flags = set_txt_std(sp, vp, 0); sp->showmode = SM_APPEND; sp->lno = vp->m_start.lno; /* Move the cursor one column to the right and repaint the screen. */ if (db_eget(sp, sp->lno, &p, &len, &isempty)) { if (!isempty) return (1); len = 0; LF_SET(TXT_APPENDEOL); } else if (len) { if (len == sp->cno + 1) { sp->cno = len; LF_SET(TXT_APPENDEOL); } else ++sp->cno; } else LF_SET(TXT_APPENDEOL); return (v_txt(sp, vp, NULL, p, len, 0, OOBLNO, F_ISSET(vp, VC_C1SET) ? vp->count : 1, flags)); } /* * v_iI -- [count]I * Insert text at the first nonblank. * * PUBLIC: int v_iI __P((SCR *, VICMD *)); */ int v_iI(sp, vp) SCR *sp; VICMD *vp; { sp->cno = 0; if (nonblank(sp, vp->m_start.lno, &sp->cno)) return (1); LOG_CORRECT; return (v_ii(sp, vp)); } /* * v_ii -- [count]i * [count]I * Insert text at the cursor position. * * PUBLIC: int v_ii __P((SCR *, VICMD *)); */ int v_ii(sp, vp) SCR *sp; VICMD *vp; { size_t len; u_int32_t flags; int isempty; char *p; flags = set_txt_std(sp, vp, 0); sp->showmode = SM_INSERT; sp->lno = vp->m_start.lno; if (db_eget(sp, sp->lno, &p, &len, &isempty)) { if (!isempty) return (1); len = 0; } if (len == 0) LF_SET(TXT_APPENDEOL); return (v_txt(sp, vp, NULL, p, len, 0, OOBLNO, F_ISSET(vp, VC_C1SET) ? vp->count : 1, flags)); } enum which { o_cmd, O_cmd }; static int io __P((SCR *, VICMD *, enum which)); /* * v_iO -- [count]O * Insert text above this line. * * PUBLIC: int v_iO __P((SCR *, VICMD *)); */ int v_iO(sp, vp) SCR *sp; VICMD *vp; { return (io(sp, vp, O_cmd)); } /* * v_io -- [count]o * Insert text after this line. * * PUBLIC: int v_io __P((SCR *, VICMD *)); */ int v_io(sp, vp) SCR *sp; VICMD *vp; { return (io(sp, vp, o_cmd)); } static int io(sp, vp, cmd) SCR *sp; VICMD *vp; enum which cmd; { recno_t ai_line, lno; size_t len; u_int32_t flags; char *p; flags = set_txt_std(sp, vp, TXT_ADDNEWLINE | TXT_APPENDEOL); sp->showmode = SM_INSERT; if (sp->lno == 1) { if (db_last(sp, &lno)) return (1); if (lno != 0) goto insert; p = NULL; len = 0; ai_line = OOBLNO; } else { insert: p = ""; sp->cno = 0; LOG_CORRECT; if (cmd == O_cmd) { if (db_insert(sp, sp->lno, p, 0)) return (1); if (db_get(sp, sp->lno, DBG_FATAL, &p, &len)) return (1); ai_line = sp->lno + 1; } else { if (db_append(sp, 1, sp->lno, p, 0)) return (1); if (db_get(sp, ++sp->lno, DBG_FATAL, &p, &len)) return (1); ai_line = sp->lno - 1; } } return (v_txt(sp, vp, NULL, p, len, 0, ai_line, F_ISSET(vp, VC_C1SET) ? vp->count : 1, flags)); } /* * v_change -- [buffer][count]c[count]motion * [buffer][count]C * [buffer][count]S * Change command. * * PUBLIC: int v_change __P((SCR *, VICMD *)); */ int v_change(sp, vp) SCR *sp; VICMD *vp; { size_t blen, len; u_int32_t flags; int isempty, lmode, rval; char *bp, *p; /* * 'c' can be combined with motion commands that set the resulting * cursor position, i.e. "cG". Clear the VM_RCM flags and make the * resulting cursor position stick, inserting text has its own rules * for cursor positioning. */ F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SET); /* * Find out if the file is empty, it's easier to handle it as a * special case. */ if (vp->m_start.lno == vp->m_stop.lno && db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (!isempty) return (1); return (v_ia(sp, vp)); } flags = set_txt_std(sp, vp, 0); sp->showmode = SM_CHANGE; /* * Move the cursor to the start of the change. Note, if autoindent * is turned on, the cc command in line mode changes from the first * *non-blank* character of the line, not the first character. And, * to make it just a bit more exciting, the initial space is handled * as auto-indent characters. */ lmode = F_ISSET(vp, VM_LMODE) ? CUT_LINEMODE : 0; if (lmode) { vp->m_start.cno = 0; if (O_ISSET(sp, O_AUTOINDENT)) { if (nonblank(sp, vp->m_start.lno, &vp->m_start.cno)) return (1); LF_SET(TXT_AICHARS); } } sp->lno = vp->m_start.lno; sp->cno = vp->m_start.cno; LOG_CORRECT; /* * If not in line mode and changing within a single line, copy the * text and overwrite it. */ if (!lmode && vp->m_start.lno == vp->m_stop.lno) { /* * !!! * Historic practice, c did not cut into the numeric buffers, * only the unnamed one. */ if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, lmode)) return (1); if (len == 0) LF_SET(TXT_APPENDEOL); LF_SET(TXT_EMARK | TXT_OVERWRITE); return (v_txt(sp, vp, &vp->m_stop, p, len, 0, OOBLNO, F_ISSET(vp, VC_C1SET) ? vp->count : 1, flags)); } /* * It's trickier if in line mode or changing over multiple lines. If * we're in line mode delete all of the lines and insert a replacement * line which the user edits. If there was leading whitespace in the * first line being changed, we copy it and use it as the replacement. * If we're not in line mode, we delete the text and start inserting. * * !!! * Copy the text. Historic practice, c did not cut into the numeric * buffers, only the unnamed one. */ if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, lmode)) return (1); /* If replacing entire lines and there's leading text. */ if (lmode && vp->m_start.cno) { /* * Get a copy of the first line changed, and copy out the * leading text. */ if (db_get(sp, vp->m_start.lno, DBG_FATAL, &p, &len)) return (1); GET_SPACE_RET(sp, bp, blen, vp->m_start.cno); memmove(bp, p, vp->m_start.cno); } else bp = NULL; /* Delete the text. */ if (del(sp, &vp->m_start, &vp->m_stop, lmode)) return (1); /* If replacing entire lines, insert a replacement line. */ if (lmode) { if (db_insert(sp, vp->m_start.lno, bp, vp->m_start.cno)) return (1); sp->lno = vp->m_start.lno; len = sp->cno = vp->m_start.cno; } /* Get the line we're editing. */ if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (!isempty) return (1); len = 0; } /* Check to see if we're appending to the line. */ if (vp->m_start.cno >= len) LF_SET(TXT_APPENDEOL); rval = v_txt(sp, vp, NULL, p, len, 0, OOBLNO, F_ISSET(vp, VC_C1SET) ? vp->count : 1, flags); if (bp != NULL) FREE_SPACE(sp, bp, blen); return (rval); } /* * v_Replace -- [count]R * Overwrite multiple characters. * * PUBLIC: int v_Replace __P((SCR *, VICMD *)); */ int v_Replace(sp, vp) SCR *sp; VICMD *vp; { size_t len; u_int32_t flags; int isempty; char *p; flags = set_txt_std(sp, vp, 0); sp->showmode = SM_REPLACE; if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (!isempty) return (1); len = 0; LF_SET(TXT_APPENDEOL); } else { if (len == 0) LF_SET(TXT_APPENDEOL); LF_SET(TXT_OVERWRITE | TXT_REPLACE); } vp->m_stop.lno = vp->m_start.lno; vp->m_stop.cno = len ? len - 1 : 0; return (v_txt(sp, vp, &vp->m_stop, p, len, 0, OOBLNO, F_ISSET(vp, VC_C1SET) ? vp->count : 1, flags)); } /* * v_subst -- [buffer][count]s * Substitute characters. * * PUBLIC: int v_subst __P((SCR *, VICMD *)); */ int v_subst(sp, vp) SCR *sp; VICMD *vp; { size_t len; u_int32_t flags; int isempty; char *p; flags = set_txt_std(sp, vp, 0); sp->showmode = SM_CHANGE; if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (!isempty) return (1); len = 0; LF_SET(TXT_APPENDEOL); } else { if (len == 0) LF_SET(TXT_APPENDEOL); LF_SET(TXT_EMARK | TXT_OVERWRITE); } vp->m_stop.lno = vp->m_start.lno; vp->m_stop.cno = vp->m_start.cno + (F_ISSET(vp, VC_C1SET) ? vp->count - 1 : 0); if (vp->m_stop.cno > len - 1) vp->m_stop.cno = len - 1; if (p != NULL && cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, 0)) return (1); return (v_txt(sp, vp, &vp->m_stop, p, len, 0, OOBLNO, 1, flags)); } /* * set_txt_std -- * Initialize text processing flags. */ static u_int32_t set_txt_std(sp, vp, flags) SCR *sp; VICMD *vp; u_int32_t flags; { LF_SET(TXT_CNTRLT | TXT_ESCAPE | TXT_MAPINPUT | TXT_RECORD | TXT_RESOLVE); if (F_ISSET(vp, VC_ISDOT)) LF_SET(TXT_REPLAY); if (O_ISSET(sp, O_ALTWERASE)) LF_SET(TXT_ALTWERASE); if (O_ISSET(sp, O_AUTOINDENT)) LF_SET(TXT_AUTOINDENT); if (O_ISSET(sp, O_BEAUTIFY)) LF_SET(TXT_BEAUTIFY); if (O_ISSET(sp, O_SHOWMATCH)) LF_SET(TXT_SHOWMATCH); if (F_ISSET(sp, SC_SCRIPT)) LF_SET(TXT_CR); if (O_ISSET(sp, O_TTYWERASE)) LF_SET(TXT_TTYWERASE); /* * !!! * Mapped keys were sometimes unaffected by the wrapmargin option * in the historic 4BSD vi. Consider the following commands, where * each is executed on an empty line, in an 80 column screen, with * the wrapmargin value set to 60. * * aABC DEF .... * :map K aABC DEF ^VKKKKK * :map K 5aABC DEF ^VK * * The first and second commands are affected by wrapmargin. The * third is not. (If the inserted text is itself longer than the * wrapmargin value, i.e. if the "ABC DEF " string is replaced by * something that's longer than 60 columns from the beginning of * the line, the first two commands behave as before, but the third * command gets fairly strange.) The problem is that people wrote * macros that depended on the third command NOT being affected by * wrapmargin, as in this gem which centers lines: * * map #c $mq81a ^V^[81^V^V|D`qld0:s/ / /g^V^M$p * * For compatibility reasons, we try and make it all work here. I * offer no hope that this is right, but it's probably pretty close. * * XXX * Once I work my courage up, this is all gonna go away. It's too * evil to survive. */ if ((O_ISSET(sp, O_WRAPLEN) || O_ISSET(sp, O_WRAPMARGIN)) && (!MAPPED_KEYS_WAITING(sp) || !F_ISSET(vp, VC_C1SET))) LF_SET(TXT_WRAPMARGIN); return (flags); } vigor-0.016.orig/vi/v_left.c0100644000076400007640000001550007103707240014330 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_left.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_left -- [count]^H, [count]h * Move left by columns. * * PUBLIC: int v_left __P((SCR *, VICMD *)); */ int v_left(sp, vp) SCR *sp; VICMD *vp; { recno_t cnt; vigor_maybe_confirm(1, "\"Are you sure you want to move left?\"", sp->gp); /* * !!! * The ^H and h commands always failed in the first column. */ if (vp->m_start.cno == 0) { v_sol(sp); return (1); } /* Find the end of the range. */ cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; if (vp->m_start.cno > cnt) vp->m_stop.cno = vp->m_start.cno - cnt; else vp->m_stop.cno = 0; /* * All commands move to the end of the range. Motion commands * adjust the starting point to the character before the current * one. */ if (ISMOTION(vp)) --vp->m_start.cno; vp->m_final = vp->m_stop; return (0); } /* * v_cfirst -- [count]_ * Move to the first non-blank character in a line. * * PUBLIC: int v_cfirst __P((SCR *, VICMD *)); */ int v_cfirst(sp, vp) SCR *sp; VICMD *vp; { recno_t cnt, lno; vigor_maybe_confirm(10, "\"Are you sure you want to move there?\"", sp->gp); /* * !!! * If the _ is a motion component, it makes the command a line motion * e.g. "d_" deletes the line. It also means that the cursor doesn't * move. * * The _ command never failed in the first column. */ if (ISMOTION(vp)) F_SET(vp, VM_LMODE); /* * !!! * Historically a specified count makes _ move down count - 1 * rows, so, "3_" is the same as "2j_". */ cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; if (cnt != 1) { --vp->count; return (v_down(sp, vp)); } /* * Move to the first non-blank. * * Can't just use RCM_SET_FNB, in case _ is used as the motion * component of another command. */ vp->m_stop.cno = 0; if (nonblank(sp, vp->m_stop.lno, &vp->m_stop.cno)) return (1); /* * !!! * The _ command has to fail if the file is empty and we're doing * a delete. If deleting line 1, and 0 is the first nonblank, * make the check. */ if (vp->m_stop.lno == 1 && vp->m_stop.cno == 0 && ISCMD(vp->rkp, 'd')) { if (db_last(sp, &lno)) return (1); if (lno == 0) { v_sol(sp); return (1); } } /* * Delete and non-motion commands move to the end of the range, * yank stays at the start. Ignore others. */ vp->m_final = ISMOTION(vp) && ISCMD(vp->rkp, 'y') ? vp->m_start : vp->m_stop; return (0); } /* * v_first -- ^ * Move to the first non-blank character in this line. * * PUBLIC: int v_first __P((SCR *, VICMD *)); */ int v_first(sp, vp) SCR *sp; VICMD *vp; { vigor_maybe_confirm(10, "\"Are you sure you want to move there?\"", sp->gp); /* * !!! * Yielding to none in our quest for compatibility with every * historical blemish of vi, no matter how strange it might be, * we permit the user to enter a count and then ignore it. */ /* * Move to the first non-blank. * * Can't just use RCM_SET_FNB, in case ^ is used as the motion * component of another command. */ vp->m_stop.cno = 0; if (nonblank(sp, vp->m_stop.lno, &vp->m_stop.cno)) return (1); /* * !!! * The ^ command succeeded if used as a command when the cursor was * on the first non-blank in the line, but failed if used as a motion * component in the same situation. */ if (ISMOTION(vp) && vp->m_start.cno == vp->m_stop.cno) { v_sol(sp); return (1); } /* * If moving right, non-motion commands move to the end of the range. * Delete and yank stay at the start. Motion commands adjust the * ending point to the character before the current ending charcter. * * If moving left, all commands move to the end of the range. Motion * commands adjust the starting point to the character before the * current starting character. */ if (vp->m_start.cno < vp->m_stop.cno) if (ISMOTION(vp)) { --vp->m_stop.cno; vp->m_final = vp->m_start; } else vp->m_final = vp->m_stop; else { if (ISMOTION(vp)) --vp->m_start.cno; vp->m_final = vp->m_stop; } return (0); } /* * v_ncol -- [count]| * Move to column count or the first column on this line. If the * requested column is past EOL, move to EOL. The nasty part is * that we have to know character column widths to make this work. * * PUBLIC: int v_ncol __P((SCR *, VICMD *)); */ int v_ncol(sp, vp) SCR *sp; VICMD *vp; { vigor_maybe_confirm(10, "\"Are you sure you want to move there?\"", sp->gp); if (F_ISSET(vp, VC_C1SET) && vp->count > 1) { --vp->count; vp->m_stop.cno = vs_colpos(sp, vp->m_start.lno, (size_t)vp->count); /* * !!! * The | command succeeded if used as a command and the cursor * didn't move, but failed if used as a motion component in the * same situation. */ if (ISMOTION(vp) && vp->m_stop.cno == vp->m_start.cno) { v_nomove(sp); return (1); } } else { /* * !!! * The | command succeeded if used as a command in column 0 * without a count, but failed if used as a motion component * in the same situation. */ if (ISMOTION(vp) && vp->m_start.cno == 0) { v_sol(sp); return (1); } vp->m_stop.cno = 0; } /* * If moving right, non-motion commands move to the end of the range. * Delete and yank stay at the start. Motion commands adjust the * ending point to the character before the current ending charcter. * * If moving left, all commands move to the end of the range. Motion * commands adjust the starting point to the character before the * current starting character. */ if (vp->m_start.cno < vp->m_stop.cno) if (ISMOTION(vp)) { --vp->m_stop.cno; vp->m_final = vp->m_start; } else vp->m_final = vp->m_stop; else { if (ISMOTION(vp)) --vp->m_start.cno; vp->m_final = vp->m_stop; } return (0); } /* * v_zero -- 0 * Move to the first column on this line. * * PUBLIC: int v_zero __P((SCR *, VICMD *)); */ int v_zero(sp, vp) SCR *sp; VICMD *vp; { vigor_maybe_confirm(10, "\"Are you sure you want to move there?\"", sp->gp); /* * !!! * The 0 command succeeded if used as a command in the first column * but failed if used as a motion component in the same situation. */ if (ISMOTION(vp) && vp->m_start.cno == 0) { v_sol(sp); return (1); } /* * All commands move to the end of the range. Motion commands * adjust the starting point to the character before the current * one. */ vp->m_stop.cno = 0; if (ISMOTION(vp)) --vp->m_start.cno; vp->m_final = vp->m_stop; return (0); } vigor-0.016.orig/vi/v_mark.c0100644000076400007640000001274107103707240014334 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_mark.c 10.8 (Berkeley) 9/20/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_mark -- m[a-z] * Set a mark. * * PUBLIC: int v_mark __P((SCR *, VICMD *)); */ int v_mark(sp, vp) SCR *sp; VICMD *vp; { return (mark_set(sp, vp->character, &vp->m_start, 1)); } enum which {BQMARK, FQMARK}; static int mark __P((SCR *, VICMD *, enum which)); /* * v_bmark -- `['`a-z] * Move to a mark. * * Moves to a mark, setting both row and column. * * !!! * Although not commonly known, the "'`" and "'`" forms are historically * valid. The behavior is determined by the first character, so "`'" is * the same as "``". Remember this fact -- you'll be amazed at how many * people don't know it and will be delighted that you are able to tell * them. * * PUBLIC: int v_bmark __P((SCR *, VICMD *)); */ int v_bmark(sp, vp) SCR *sp; VICMD *vp; { return (mark(sp, vp, BQMARK)); } /* * v_fmark -- '['`a-z] * Move to a mark. * * Move to the first nonblank character of the line containing the mark. * * PUBLIC: int v_fmark __P((SCR *, VICMD *)); */ int v_fmark(sp, vp) SCR *sp; VICMD *vp; { return (mark(sp, vp, FQMARK)); } /* * mark -- * Mark commands. */ static int mark(sp, vp, cmd) SCR *sp; VICMD *vp; enum which cmd; { dir_t dir; MARK m; size_t len; if (mark_get(sp, vp->character, &vp->m_stop, M_BERR)) return (1); /* * !!! * Historically, BQMARKS for character positions that no longer * existed acted as FQMARKS. * * FQMARKS move to the first non-blank. */ switch (cmd) { case BQMARK: if (db_get(sp, vp->m_stop.lno, DBG_FATAL, NULL, &len)) return (1); if (vp->m_stop.cno < len || vp->m_stop.cno == len && len == 0) break; if (ISMOTION(vp)) F_SET(vp, VM_LMODE); cmd = FQMARK; /* FALLTHROUGH */ case FQMARK: vp->m_stop.cno = 0; if (nonblank(sp, vp->m_stop.lno, &vp->m_stop.cno)) return (1); break; default: abort(); } /* Non-motion commands move to the end of the range. */ if (!ISMOTION(vp)) { vp->m_final = vp->m_stop; return (0); } /* * !!! * If a motion component to a BQMARK, the cursor has to move. */ if (cmd == BQMARK && vp->m_stop.lno == vp->m_start.lno && vp->m_stop.cno == vp->m_start.cno) { v_nomove(sp); return (1); } /* * If the motion is in the reverse direction, switch the start and * stop MARK's so that it's in a forward direction. (There's no * reason for this other than to make the tests below easier. The * code in vi.c:vi() would have done the switch.) Both forward * and backward motions can happen for any kind of search command. */ if (vp->m_start.lno > vp->m_stop.lno || vp->m_start.lno == vp->m_stop.lno && vp->m_start.cno > vp->m_stop.cno) { m = vp->m_start; vp->m_start = vp->m_stop; vp->m_stop = m; dir = BACKWARD; } else dir = FORWARD; /* * Yank cursor motion, when associated with marks as motion commands, * historically behaved as follows: * * ` motion ' motion * Line change? Line change? * Y N Y N * -------------- --------------- * FORWARD: | NM NM | NM NM * | | * BACKWARD: | M M | M NM(1) * * where NM means the cursor didn't move, and M means the cursor * moved to the mark. * * As the cursor was usually moved for yank commands associated * with backward motions, this implementation regularizes it by * changing the NM at position (1) to be an M. This makes mark * motions match search motions, which is probably A Good Thing. * * Delete cursor motion was always to the start of the text region, * regardless. Ignore other motion commands. */ #ifdef HISTORICAL_PRACTICE if (ISCMD(vp->rkp, 'y')) { if ((cmd == BQMARK || cmd == FQMARK && vp->m_start.lno != vp->m_stop.lno) && (vp->m_start.lno > vp->m_stop.lno || vp->m_start.lno == vp->m_stop.lno && vp->m_start.cno > vp->m_stop.cno)) vp->m_final = vp->m_stop; } else if (ISCMD(vp->rkp, 'd')) if (vp->m_start.lno > vp->m_stop.lno || vp->m_start.lno == vp->m_stop.lno && vp->m_start.cno > vp->m_stop.cno) vp->m_final = vp->m_stop; #else vp->m_final = vp->m_start; #endif /* * Forward marks are always line oriented, and it's set in the * vcmd.c table. */ if (cmd == FQMARK) return (0); /* * BQMARK'S moving backward and starting at column 0, and ones moving * forward and ending at column 0 are corrected to the last column of * the previous line. Otherwise, adjust the starting/ending point to * the character before the current one (this is safe because we know * the search had to move to succeed). * * Mark motions become line mode opertions if they start at the first * nonblank and end at column 0 of another line. */ if (vp->m_start.lno < vp->m_stop.lno && vp->m_stop.cno == 0) { if (db_get(sp, --vp->m_stop.lno, DBG_FATAL, NULL, &len)) return (1); vp->m_stop.cno = len ? len - 1 : 0; len = 0; if (nonblank(sp, vp->m_start.lno, &len)) return (1); if (vp->m_start.cno <= len) F_SET(vp, VM_LMODE); } else --vp->m_stop.cno; return (0); } vigor-0.016.orig/vi/v_match.c0100644000076400007640000000712207103707240014473 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_match.c 10.8 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_match -- % * Search to matching character. * * PUBLIC: int v_match __P((SCR *, VICMD *)); */ int v_match(sp, vp) SCR *sp; VICMD *vp; { VCS cs; MARK *mp; size_t cno, len, off; int cnt, isempty, matchc, startc, (*gc)__P((SCR *, VCS *)); char *p; /* * !!! * Historic practice; ignore the count. * * !!! * Historical practice was to search for the initial character in the * forward direction only. */ if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (isempty) goto nomatch; return (1); } for (off = vp->m_start.cno;; ++off) { if (off >= len) { nomatch: msgq(sp, M_BERR, "184|No match character on this line"); return (1); } switch (startc = p[off]) { case '(': matchc = ')'; gc = cs_next; break; case ')': matchc = '('; gc = cs_prev; break; case '[': matchc = ']'; gc = cs_next; break; case ']': matchc = '['; gc = cs_prev; break; case '{': matchc = '}'; gc = cs_next; break; case '}': matchc = '{'; gc = cs_prev; break; case '<': matchc = '>'; gc = cs_next; break; case '>': matchc = '<'; gc = cs_prev; break; default: continue; } break; } cs.cs_lno = vp->m_start.lno; cs.cs_cno = off; if (cs_init(sp, &cs)) return (1); for (cnt = 1;;) { if (gc(sp, &cs)) return (1); if (cs.cs_flags != 0) { if (cs.cs_flags == CS_EOF || cs.cs_flags == CS_SOF) break; continue; } if (cs.cs_ch == startc) ++cnt; else if (cs.cs_ch == matchc && --cnt == 0) break; } if (cnt) { msgq(sp, M_BERR, "185|Matching character not found"); return (1); } vp->m_stop.lno = cs.cs_lno; vp->m_stop.cno = cs.cs_cno; /* * If moving right, non-motion commands move to the end of the range. * Delete and yank stay at the start. * * If moving left, all commands move to the end of the range. * * !!! * Don't correct for leftward movement -- historic vi deleted the * starting cursor position when deleting to a match. */ if (vp->m_start.lno < vp->m_stop.lno || vp->m_start.lno == vp->m_stop.lno && vp->m_start.cno < vp->m_stop.cno) vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; else vp->m_final = vp->m_stop; /* * !!! * If the motion is across lines, and the earliest cursor position * is at or before any non-blank characters in the line, i.e. the * movement is cutting all of the line's text, and the later cursor * position has nothing other than whitespace characters between it * and the end of its line, the buffer is in line mode. */ if (!ISMOTION(vp) || vp->m_start.lno == vp->m_stop.lno) return (0); mp = vp->m_start.lno < vp->m_stop.lno ? &vp->m_start : &vp->m_stop; if (mp->cno != 0) { cno = 0; if (nonblank(sp, mp->lno, &cno)) return (1); if (cno < mp->cno) return (0); } mp = vp->m_start.lno < vp->m_stop.lno ? &vp->m_stop : &vp->m_start; if (db_get(sp, mp->lno, DBG_FATAL, &p, &len)) return (1); for (p += mp->cno + 1, len -= mp->cno; --len; ++p) if (!isblank(*p)) return (0); F_SET(vp, VM_LMODE); return (0); } vigor-0.016.orig/vi/v_paragraph.c0100644000076400007640000002027207103707240015345 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_paragraph.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" #define INTEXT_CHECK { \ if (len == 0 || v_isempty(p, len)) { \ if (!--cnt) \ goto found; \ pstate = P_INBLANK; \ } \ /* \ * !!! \ * Historic documentation (USD:15-11, 4.2) said that formfeed \ * characters (^L) in the first column delimited paragraphs. \ * The historic vi code mentions formfeed characters, but never \ * implements them. It seems reasonable, do it. \ */ \ if (p[0] == '\014') { \ if (!--cnt) \ goto found; \ continue; \ } \ if (p[0] != '.' || len < 2) \ continue; \ for (lp = VIP(sp)->ps; *lp != '\0'; lp += 2) \ if (lp[0] == p[1] && \ (lp[1] == ' ' && len == 2 || lp[1] == p[2]) && \ !--cnt) \ goto found; \ } /* * v_paragraphf -- [count]} * Move forward count paragraphs. * * Paragraphs are empty lines after text, formfeed characters, or values * from the paragraph or section options. * * PUBLIC: int v_paragraphf __P((SCR *, VICMD *)); */ int v_paragraphf(sp, vp) SCR *sp; VICMD *vp; { enum { P_INTEXT, P_INBLANK } pstate; size_t lastlen, len; recno_t cnt, lastlno, lno; int isempty; char *p, *lp; vigor_hint("\"Remember, what I think is a paragraph may be different than what you expect!\"", sp->gp); /* * !!! * If the starting cursor position is at or before any non-blank * characters in the line, i.e. the movement is cutting all of the * line's text, the buffer is in line mode. It's a lot easier to * check here, because we know that the end is going to be the start * or end of a line. * * This was historical practice in vi, with a single exception. If * the paragraph movement was from the start of the last line to EOF, * then all the characters were deleted from the last line, but the * line itself remained. If somebody complains, don't pause, don't * hesitate, just hit them. */ if (ISMOTION(vp)) if (vp->m_start.cno == 0) F_SET(vp, VM_LMODE); else { vp->m_stop = vp->m_start; vp->m_stop.cno = 0; if (nonblank(sp, vp->m_stop.lno, &vp->m_stop.cno)) return (1); if (vp->m_start.cno <= vp->m_stop.cno) F_SET(vp, VM_LMODE); } /* Figure out what state we're currently in. */ lno = vp->m_start.lno; if (db_get(sp, lno, 0, &p, &len)) goto eof; /* * If we start in text, we want to switch states * (2 * N - 1) times, in non-text, (2 * N) times. */ cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt *= 2; if (len == 0 || v_isempty(p, len)) pstate = P_INBLANK; else { --cnt; pstate = P_INTEXT; } for (;;) { lastlno = lno; lastlen = len; if (db_get(sp, ++lno, 0, &p, &len)) goto eof; switch (pstate) { case P_INTEXT: INTEXT_CHECK; break; case P_INBLANK: if (len == 0 || v_isempty(p, len)) break; if (--cnt) { pstate = P_INTEXT; break; } /* * !!! * Non-motion commands move to the end of the range, * delete and yank stay at the start. Ignore others. * Adjust the end of the range for motion commands; * historically, a motion component was to the end of * the previous line, whereas the movement command was * to the start of the new "paragraph". */ found: if (ISMOTION(vp)) { vp->m_stop.lno = lastlno; vp->m_stop.cno = lastlen ? lastlen - 1 : 0; vp->m_final = vp->m_start; } else { vp->m_stop.lno = lno; vp->m_stop.cno = 0; vp->m_final = vp->m_stop; } return (0); default: abort(); } } /* * !!! * Adjust end of the range for motion commands; EOF is a movement * sink. The } command historically moved to the end of the last * line, not the beginning, from any position before the end of the * last line. It also historically worked on empty files, so we * have to make it okay. */ eof: if (vp->m_start.lno == lno || vp->m_start.lno == lno - 1) { if (db_eget(sp, vp->m_start.lno, &p, &len, &isempty)) { if (!isempty) return (1); vp->m_start.cno = 0; return (0); } if (vp->m_start.cno == (len ? len - 1 : 0)) { v_eof(sp, NULL); return (1); } } /* * !!! * Non-motion commands move to the end of the range, delete * and yank stay at the start. Ignore others. * * If deleting the line (which happens if deleting to EOF), then * cursor movement is to the first nonblank. */ if (ISMOTION(vp) && ISCMD(vp->rkp, 'd')) { F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SETFNB); } vp->m_stop.lno = lno - 1; vp->m_stop.cno = len ? len - 1 : 0; vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; return (0); } /* * v_paragraphb -- [count]{ * Move backward count paragraphs. * * PUBLIC: int v_paragraphb __P((SCR *, VICMD *)); */ int v_paragraphb(sp, vp) SCR *sp; VICMD *vp; { enum { P_INTEXT, P_INBLANK } pstate; size_t len; recno_t cnt, lno; char *p, *lp; vigor_hint("\"Remember, what I think is a paragraph may be different than what you expect!\"", sp->gp); /* * !!! * Check for SOF. The historic vi didn't complain if users hit SOF * repeatedly, unless it was part of a motion command. There is no * question but that Emerson's editor of choice was vi. * * The { command historically moved to the beginning of the first * line if invoked on the first line. * * !!! * If the starting cursor position is in the first column (backward * paragraph movements did NOT historically pay attention to non-blank * characters) i.e. the movement is cutting the entire line, the buffer * is in line mode. Cuts from the beginning of the line also did not * cut the current line, but started at the previous EOL. * * Correct for a left motion component while we're thinking about it. */ lno = vp->m_start.lno; if (ISMOTION(vp)) if (vp->m_start.cno == 0) { if (vp->m_start.lno == 1) { v_sof(sp, &vp->m_start); return (1); } else --vp->m_start.lno; F_SET(vp, VM_LMODE); } else --vp->m_start.cno; if (vp->m_start.lno <= 1) goto sof; /* Figure out what state we're currently in. */ if (db_get(sp, lno, 0, &p, &len)) goto sof; /* * If we start in text, we want to switch states * (2 * N - 1) times, in non-text, (2 * N) times. */ cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt *= 2; if (len == 0 || v_isempty(p, len)) pstate = P_INBLANK; else { --cnt; pstate = P_INTEXT; /* * !!! * If the starting cursor is past the first column, * the current line is checked for a paragraph. */ if (vp->m_start.cno > 0) ++lno; } for (;;) { if (db_get(sp, --lno, 0, &p, &len)) goto sof; switch (pstate) { case P_INTEXT: INTEXT_CHECK; break; case P_INBLANK: if (len != 0 && !v_isempty(p, len)) { if (!--cnt) goto found; pstate = P_INTEXT; } break; default: abort(); } } /* SOF is a movement sink. */ sof: lno = 1; found: vp->m_stop.lno = lno; vp->m_stop.cno = 0; /* * All commands move to the end of the range. (We already * adjusted the start of the range for motion commands). */ vp->m_final = vp->m_stop; return (0); } /* * v_buildps -- * Build the paragraph command search pattern. * * PUBLIC: int v_buildps __P((SCR *, char *, char *)); */ int v_buildps(sp, p_p, s_p) SCR *sp; char *p_p, *s_p; { VI_PRIVATE *vip; size_t p_len, s_len; char *p; /* * The vi paragraph command searches for either a paragraph or * section option macro. */ p_len = p_p == NULL ? 0 : strlen(p_p); s_len = s_p == NULL ? 0 : strlen(s_p); if (p_len == 0 && s_len == 0) return (0); MALLOC_RET(sp, p, char *, p_len + s_len + 1); vip = VIP(sp); if (vip->ps != NULL) free(vip->ps); if (p_p != NULL) memmove(p, p_p, p_len + 1); if (s_p != NULL) memmove(p + p_len, s_p, s_len + 1); vip->ps = p; return (0); } vigor-0.016.orig/vi/v_put.c0100644000076400007640000000573007103707240014212 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_put.c 10.5 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static void inc_buf __P((SCR *, VICMD *)); /* * v_Put -- [buffer]P * Insert the contents of the buffer before the cursor. * * PUBLIC: int v_Put __P((SCR *, VICMD *)); */ int v_Put(sp, vp) SCR *sp; VICMD *vp; { u_long cnt; if (F_ISSET(vp, VC_ISDOT)) inc_buf(sp, vp); /* * !!! * Historic vi did not support a count with the 'p' and 'P' * commands. It's useful, so we do. */ for (cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt--;) { if (put(sp, NULL, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_final, 0)) return (1); vp->m_start = vp->m_final; if (INTERRUPTED(sp)) return (1); } return (0); } /* * v_put -- [buffer]p * Insert the contents of the buffer after the cursor. * * PUBLIC: int v_put __P((SCR *, VICMD *)); */ int v_put(sp, vp) SCR *sp; VICMD *vp; { u_long cnt; if (F_ISSET(vp, VC_ISDOT)) inc_buf(sp, vp); /* * !!! * Historic vi did not support a count with the 'p' and 'P' * commands. It's useful, so we do. */ for (cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt--;) { if (put(sp, NULL, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_final, 1)) return (1); vp->m_start = vp->m_final; if (INTERRUPTED(sp)) return (1); } return (0); } /* * !!! * Historical whackadoo. The dot command `puts' the numbered buffer * after the last one put. For example, `"4p.' would put buffer #4 * and buffer #5. If the user continued to enter '.', the #9 buffer * would be repeatedly output. This was not documented, and is a bit * tricky to reconstruct. Historical versions of vi also dropped the * contents of the default buffer after each put, so after `"4p' the * default buffer would be empty. This makes no sense to me, so we * don't bother. Don't assume sequential order of numeric characters. * * And, if that weren't exciting enough, failed commands don't normally * set the dot command. Well, boys and girls, an exception is that * the buffer increment gets done regardless of the success of the put. */ static void inc_buf(sp, vp) SCR *sp; VICMD *vp; { CHAR_T v; switch (vp->buffer) { case '1': v = '2'; break; case '2': v = '3'; break; case '3': v = '4'; break; case '4': v = '5'; break; case '5': v = '6'; break; case '6': v = '7'; break; case '7': v = '8'; break; case '8': v = '9'; break; default: return; } VIP(sp)->sdot.buffer = vp->buffer = v; } vigor-0.016.orig/vi/v_redraw.c0100644000076400007640000000135507103707240014665 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_redraw.c 10.6 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_redraw -- ^L, ^R * Redraw the screen. * * PUBLIC: int v_redraw __P((SCR *, VICMD *)); */ int v_redraw(sp, vp) SCR *sp; VICMD *vp; { return (sp->gp->scr_refresh(sp, 1)); } vigor-0.016.orig/vi/v_replace.c0100644000076400007640000001266207103707240015017 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_replace.c 10.17 (Berkeley) 6/30/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_replace -- [count]r * * !!! * The r command in historic vi was almost beautiful in its badness. For * example, "r" and "r" beeped the terminal and deleted * a single character. "Nr", where N was greater than 1, * inserted a single carriage return. "r" did cancel the command, * but "r" erased a single character. To enter a literal * character, it required three characters after the * command. This may not be right, but at least it's not insane. * * PUBLIC: int v_replace __P((SCR *, VICMD *)); */ int v_replace(sp, vp) SCR *sp; VICMD *vp; { EVENT ev; VI_PRIVATE *vip; TEXT *tp; size_t blen, len; u_long cnt; int quote, rval; char *bp, *p; vip = VIP(sp); /* * If the line doesn't exist, or it's empty, replacement isn't * allowed. It's not hard to implement, but: * * 1: It's historic practice (vi beeped before the replacement * character was even entered). * 2: For consistency, this change would require that the more * general case, "Nr", when the user is < N characters from * the end of the line, also work, which would be a bit odd. * 3: Replacing with a has somewhat odd semantics. */ if (db_get(sp, vp->m_start.lno, DBG_FATAL, &p, &len)) return (1); if (len == 0) { msgq(sp, M_BERR, "186|No characters to replace"); return (1); } /* * Figure out how many characters to be replace. For no particular * reason (other than that the semantics of replacing the newline * are confusing) only permit the replacement of the characters in * the current line. I suppose we could append replacement characters * to the line, but I see no compelling reason to do so. Check this * before we get the character to match historic practice, where Nr * failed immediately if there were less than N characters from the * cursor to the end of the line. */ cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; vp->m_stop.lno = vp->m_start.lno; vp->m_stop.cno = vp->m_start.cno + cnt - 1; if (vp->m_stop.cno > len - 1) { v_eol(sp, &vp->m_start); return (1); } /* * If it's not a repeat, reset the current mode and get a replacement * character. */ quote = 0; if (!F_ISSET(vp, VC_ISDOT)) { sp->showmode = SM_REPLACE; if (vs_refresh(sp, 0)) return (1); next: if (v_event_get(sp, &ev, 0, 0)) return (1); switch (ev.e_event) { case E_CHARACTER: /* * means escape the next character. * means they changed their minds. */ if (!quote) { if (ev.e_value == K_VLNEXT) { quote = 1; goto next; } if (ev.e_value == K_ESCAPE) return (0); } vip->rlast = ev.e_c; vip->rvalue = ev.e_value; break; case E_ERR: case E_EOF: F_SET(sp, SC_EXIT_FORCE); return (1); case E_INTERRUPT: /* means they changed their minds. */ return (0); case E_WRESIZE: /* interrupts the input mode. */ v_emsg(sp, NULL, VIM_WRESIZE); return (0); case E_REPAINT: if (vs_repaint(sp, &ev)) return (1); goto next; default: v_event_err(sp, &ev); return (0); } } /* Copy the line. */ GET_SPACE_RET(sp, bp, blen, len); memmove(bp, p, len); p = bp; /* * Versions of nvi before 1.57 created N new lines when they replaced * N characters with or characters. This * is different from the historic vi, which replaced N characters with * a single new line. Users complained, so we match historic practice. */ if (!quote && vip->rvalue == K_CR || vip->rvalue == K_NL) { /* Set return line. */ vp->m_stop.lno = vp->m_start.lno + 1; vp->m_stop.cno = 0; /* The first part of the current line. */ if (db_set(sp, vp->m_start.lno, p, vp->m_start.cno)) goto err_ret; /* * The rest of the current line. And, of course, now it gets * tricky. If there are characters left in the line and if * the autoindent edit option is set, white space after the * replaced character is discarded, autoindent is applied, and * the cursor moves to the last indent character. */ p += vp->m_start.cno + cnt; len -= vp->m_start.cno + cnt; if (len != 0 && O_ISSET(sp, O_AUTOINDENT)) for (; len && isblank(*p); --len, ++p); if ((tp = text_init(sp, p, len, len)) == NULL) goto err_ret; if (len != 0 && O_ISSET(sp, O_AUTOINDENT)) { if (v_txt_auto(sp, vp->m_start.lno, NULL, 0, tp)) goto err_ret; vp->m_stop.cno = tp->ai ? tp->ai - 1 : 0; } else vp->m_stop.cno = 0; vp->m_stop.cno = tp->ai ? tp->ai - 1 : 0; if (db_append(sp, 1, vp->m_start.lno, tp->lb, tp->len)) err_ret: rval = 1; else { text_free(tp); rval = 0; } } else { memset(bp + vp->m_start.cno, vip->rlast, cnt); rval = db_set(sp, vp->m_start.lno, bp, len); } FREE_SPACE(sp, bp, blen); vp->m_final = vp->m_stop; return (rval); } vigor-0.016.orig/vi/v_right.c0100644000076400007640000000650307103707240014516 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_right.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_right -- [count]' ', [count]l * Move right by columns. * * PUBLIC: int v_right __P((SCR *, VICMD *)); */ int v_right(sp, vp) SCR *sp; VICMD *vp; { size_t len; int isempty; vigor_maybe_confirm(1, "\"Are you sure you want to move right?\"", sp->gp); if (db_eget(sp, vp->m_start.lno, NULL, &len, &isempty)) { if (isempty) goto eol; return (1); } /* It's always illegal to move right on empty lines. */ if (len == 0) { eol: v_eol(sp, NULL); return (1); } /* * Non-motion commands move to the end of the range. Delete and * yank stay at the start. Ignore others. Adjust the end of the * range for motion commands. * * !!! * Historically, "[cdsy]l" worked at the end of a line. Also, * EOL is a count sink. */ vp->m_stop.cno = vp->m_start.cno + (F_ISSET(vp, VC_C1SET) ? vp->count : 1); if (vp->m_start.cno == len - 1 && !ISMOTION(vp)) { v_eol(sp, NULL); return (1); } if (vp->m_stop.cno >= len) { vp->m_stop.cno = len - 1; vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; } else if (ISMOTION(vp)) { --vp->m_stop.cno; vp->m_final = vp->m_start; } else vp->m_final = vp->m_stop; return (0); } /* * v_dollar -- [count]$ * Move to the last column. * * PUBLIC: int v_dollar __P((SCR *, VICMD *)); */ int v_dollar(sp, vp) SCR *sp; VICMD *vp; { size_t len; int isempty; vigor_maybe_confirm(10, "\"Are you sure you want to move to the last column?\"", sp->gp); /* * !!! * A count moves down count - 1 rows, so, "3$" is the same as "2j$". */ if ((F_ISSET(vp, VC_C1SET) ? vp->count : 1) != 1) { /* * !!! * Historically, if the $ is a motion, and deleting from * at or before the first non-blank of the line, it's a * line motion, and the line motion flag is set. */ vp->m_stop.cno = 0; if (nonblank(sp, vp->m_start.lno, &vp->m_stop.cno)) return (1); if (ISMOTION(vp) && vp->m_start.cno <= vp->m_stop.cno) F_SET(vp, VM_LMODE); --vp->count; if (v_down(sp, vp)) return (1); } /* * !!! * Historically, it was illegal to use $ as a motion command on * an empty line. Unfortunately, even though C was historically * aliased to c$, it (and not c$) was special cased to work on * empty lines. Since we alias C to c$ too, we have a problem. * To fix it, we let c$ go through, on the assumption that it's * not a problem for it to work. */ if (db_eget(sp, vp->m_stop.lno, NULL, &len, &isempty)) { if (!isempty) return (1); len = 0; } if (len == 0) { if (ISMOTION(vp) && !ISCMD(vp->rkp, 'c')) { v_eol(sp, NULL); return (1); } return (0); } /* * Non-motion commands move to the end of the range. Delete * and yank stay at the start. Ignore others. */ vp->m_stop.cno = len ? len - 1 : 0; vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; return (0); } vigor-0.016.orig/vi/v_screen.c0100644000076400007640000000273707103707240014665 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_screen.c 10.10 (Berkeley) 4/27/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_screen -- ^W * Switch screens. * * PUBLIC: int v_screen __P((SCR *, VICMD *)); */ int v_screen(sp, vp) SCR *sp; VICMD *vp; { /* * You can't leave a colon command-line edit window -- it's not that * it won't work, but it gets real weird, real fast when you execute * a colon command out of a window that was forked from a window that's * now backgrounded... You get the idea. */ if (F_ISSET(sp, SC_COMEDIT)) { msgq(sp, M_ERR, "308|Enter to execute a command, :q to exit"); return (1); } /* * Try for the next lower screen, or, go back to the first * screen on the stack. */ if (sp->q.cqe_next != (void *)&sp->gp->dq) sp->nextdisp = sp->q.cqe_next; else if (sp->gp->dq.cqh_first == sp) { msgq(sp, M_ERR, "187|No other screen to switch to"); return (1); } else sp->nextdisp = sp->gp->dq.cqh_first; F_SET(sp->nextdisp, SC_STATUS); F_SET(sp, SC_SSWITCH | SC_STATUS); return (0); } vigor-0.016.orig/vi/v_scroll.c0100644000076400007640000002757107103707240014707 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_scroll.c 10.9 (Berkeley) 4/27/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static void goto_adjust __P((VICMD *)); /* * The historic vi had a problem in that all movements were by physical * lines, not by logical, or screen lines. Arguments can be made that this * is the right thing to do. For example, single line movements, such as * 'j' or 'k', should probably work on physical lines. Commands like "dj", * or "j.", where '.' is a change command, make more sense for physical lines * than they do for logical lines. * * These arguments, however, don't apply to scrolling commands like ^D and * ^F -- if the window is fairly small, using physical lines can result in * a half-page scroll repainting the entire screen, which is not what the * user wanted. Second, if the line is larger than the screen, using physical * lines can make it impossible to display parts of the line -- there aren't * any commands that don't display the beginning of the line in historic vi, * and if both the beginning and end of the line can't be on the screen at * the same time, you lose. This is even worse in the case of the H, L, and * M commands -- for large lines, they may all refer to the same line and * will result in no movement at all. * * Another issue is that page and half-page scrolling commands historically * moved to the first non-blank character in the new line. If the line is * approximately the same size as the screen, this loses because the cursor * before and after a ^D, may refer to the same location on the screen. In * this implementation, scrolling commands set the cursor to the first non- * blank character if the line changes because of the scroll. Otherwise, * the cursor is left alone. * * This implementation does the scrolling (^B, ^D, ^F, ^U, ^Y, ^E), and the * cursor positioning commands (H, L, M) commands using logical lines, not * physical. */ /* * v_lgoto -- [count]G * Go to first non-blank character of the line count, the last line * of the file by default. * * PUBLIC: int v_lgoto __P((SCR *, VICMD *)); */ int v_lgoto(sp, vp) SCR *sp; VICMD *vp; { recno_t nlines; if (F_ISSET(vp, VC_C1SET)) { if (!db_exist(sp, vp->count)) { /* * !!! * Historically, 1G was legal in an empty file. */ if (vp->count == 1) { if (db_last(sp, &nlines)) return (1); if (nlines == 0) return (0); } v_eof(sp, &vp->m_start); return (1); } vp->m_stop.lno = vp->count; } else { if (db_last(sp, &nlines)) return (1); vp->m_stop.lno = nlines ? nlines : 1; } goto_adjust(vp); return (0); } /* * v_home -- [count]H * Move to the first non-blank character of the logical line * count - 1 from the top of the screen, 0 by default. * * PUBLIC: int v_home __P((SCR *, VICMD *)); */ int v_home(sp, vp) SCR *sp; VICMD *vp; { if (vs_sm_position(sp, &vp->m_stop, F_ISSET(vp, VC_C1SET) ? vp->count - 1 : 0, P_TOP)) return (1); goto_adjust(vp); return (0); } /* * v_middle -- M * Move to the first non-blank character of the logical line * in the middle of the screen. * * PUBLIC: int v_middle __P((SCR *, VICMD *)); */ int v_middle(sp, vp) SCR *sp; VICMD *vp; { /* * Yielding to none in our quest for compatibility with every * historical blemish of vi, no matter how strange it might be, * we permit the user to enter a count and then ignore it. */ if (vs_sm_position(sp, &vp->m_stop, 0, P_MIDDLE)) return (1); goto_adjust(vp); return (0); } /* * v_bottom -- [count]L * Move to the first non-blank character of the logical line * count - 1 from the bottom of the screen, 0 by default. * * PUBLIC: int v_bottom __P((SCR *, VICMD *)); */ int v_bottom(sp, vp) SCR *sp; VICMD *vp; { if (vs_sm_position(sp, &vp->m_stop, F_ISSET(vp, VC_C1SET) ? vp->count - 1 : 0, P_BOTTOM)) return (1); goto_adjust(vp); return (0); } static void goto_adjust(vp) VICMD *vp; { /* Guess that it's the end of the range. */ vp->m_final = vp->m_stop; /* * Non-motion commands move the cursor to the end of the range, and * then to the NEXT nonblank of the line. Historic vi always moved * to the first nonblank in the line; since the H, M, and L commands * are logical motions in this implementation, we do the next nonblank * so that it looks approximately the same to the user. To make this * happen, the VM_RCM_SETNNB flag is set in the vcmd.c command table. * * If it's a motion, it's more complicated. The best possible solution * is probably to display the first nonblank of the line the cursor * will eventually rest on. This is tricky, particularly given that if * the associated command is a delete, we don't yet know what line that * will be. So, we clear the VM_RCM_SETNNB flag, and set the first * nonblank flag (VM_RCM_SETFNB). Note, if the lines are sufficiently * long, this can cause the cursor to warp out of the screen. It's too * hard to fix. * * XXX * The G command is always first nonblank, so it's okay to reset it. */ if (ISMOTION(vp)) { F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SETFNB); } else return; /* * If moving backward in the file, delete and yank move to the end * of the range, unless the line didn't change, in which case yank * doesn't move. If moving forward in the file, delete and yank * stay at the start of the range. Ignore others. */ if (vp->m_stop.lno < vp->m_start.lno || vp->m_stop.lno == vp->m_start.lno && vp->m_stop.cno < vp->m_start.cno) { if (ISCMD(vp->rkp, 'y') && vp->m_stop.lno == vp->m_start.lno) vp->m_final = vp->m_start; } else vp->m_final = vp->m_start; } /* * v_up -- [count]^P, [count]k, [count]- * Move up by lines. * * PUBLIC: int v_up __P((SCR *, VICMD *)); */ int v_up(sp, vp) SCR *sp; VICMD *vp; { recno_t lno; lno = F_ISSET(vp, VC_C1SET) ? vp->count : 1; if (vp->m_start.lno <= lno) { v_sof(sp, &vp->m_start); return (1); } vp->m_stop.lno = vp->m_start.lno - lno; vp->m_final = vp->m_stop; return (0); } /* * v_cr -- [count]^M * In a script window, send the line to the shell. * In a regular window, move down by lines. * * PUBLIC: int v_cr __P((SCR *, VICMD *)); */ int v_cr(sp, vp) SCR *sp; VICMD *vp; { /* If it's a colon command-line edit window, it's an ex command. */ if (F_ISSET(sp, SC_COMEDIT)) return (v_ecl_exec(sp)); /* If it's a script window, exec the line. */ if (F_ISSET(sp, SC_SCRIPT)) return (sscr_exec(sp, vp->m_start.lno)); /* Otherwise, it's the same as v_down(). */ return (v_down(sp, vp)); } /* * v_down -- [count]^J, [count]^N, [count]j, [count]^M, [count]+ * Move down by lines. * * PUBLIC: int v_down __P((SCR *, VICMD *)); */ int v_down(sp, vp) SCR *sp; VICMD *vp; { recno_t lno; lno = vp->m_start.lno + (F_ISSET(vp, VC_C1SET) ? vp->count : 1); if (!db_exist(sp, lno)) { v_eof(sp, &vp->m_start); return (1); } vp->m_stop.lno = lno; vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; return (0); } /* * v_hpageup -- [count]^U * Page up half screens. * * PUBLIC: int v_hpageup __P((SCR *, VICMD *)); */ int v_hpageup(sp, vp) SCR *sp; VICMD *vp; { /* * Half screens always succeed unless already at SOF. * * !!! * Half screens set the scroll value, even if the command * ultimately failed, in historic vi. Probably a don't care. */ if (F_ISSET(vp, VC_C1SET)) sp->defscroll = vp->count; if (vs_sm_scroll(sp, &vp->m_stop, sp->defscroll, CNTRL_U)) return (1); vp->m_final = vp->m_stop; return (0); } /* * v_hpagedown -- [count]^D * Page down half screens. * * PUBLIC: int v_hpagedown __P((SCR *, VICMD *)); */ int v_hpagedown(sp, vp) SCR *sp; VICMD *vp; { /* * Half screens always succeed unless already at EOF. * * !!! * Half screens set the scroll value, even if the command * ultimately failed, in historic vi. Probably a don't care. */ if (F_ISSET(vp, VC_C1SET)) sp->defscroll = vp->count; if (vs_sm_scroll(sp, &vp->m_stop, sp->defscroll, CNTRL_D)) return (1); vp->m_final = vp->m_stop; return (0); } /* * v_pagedown -- [count]^F * Page down full screens. * !!! * Historic vi did not move to the EOF if the screen couldn't move, i.e. * if EOF was already displayed on the screen. This implementation does * move to EOF in that case, making ^F more like the the historic ^D. * * PUBLIC: int v_pagedown __P((SCR *, VICMD *)); */ int v_pagedown(sp, vp) SCR *sp; VICMD *vp; { recno_t offset; /* * !!! * The calculation in IEEE Std 1003.2-1992 (POSIX) is: * * top_line = top_line + count * (window - 2); * * which was historically wrong. The correct one is: * * top_line = top_line + count * window - 2; * * i.e. the two line "overlap" was only subtracted once. Which * makes no sense, but then again, an overlap makes no sense for * any screen but the "next" one anyway. We do it the historical * way as there's no good reason to change it. * * If the screen has been split, use the smaller of the current * window size and the window option value. * * It possible for this calculation to be less than 1; move at * least one line. */ offset = (F_ISSET(vp, VC_C1SET) ? vp->count : 1) * (IS_SPLIT(sp) ? MIN(sp->t_maxrows, O_VAL(sp, O_WINDOW)) : O_VAL(sp, O_WINDOW)); offset = offset <= 2 ? 1 : offset - 2; if (vs_sm_scroll(sp, &vp->m_stop, offset, CNTRL_F)) return (1); vp->m_final = vp->m_stop; return (0); } /* * v_pageup -- [count]^B * Page up full screens. * * !!! * Historic vi did not move to the SOF if the screen couldn't move, i.e. * if SOF was already displayed on the screen. This implementation does * move to SOF in that case, making ^B more like the the historic ^U. * * PUBLIC: int v_pageup __P((SCR *, VICMD *)); */ int v_pageup(sp, vp) SCR *sp; VICMD *vp; { recno_t offset; /* * !!! * The calculation in IEEE Std 1003.2-1992 (POSIX) is: * * top_line = top_line - count * (window - 2); * * which was historically wrong. The correct one is: * * top_line = (top_line - count * window) + 2; * * A simpler expression is that, as with ^F, we scroll exactly: * * count * window - 2 * * lines. * * Bizarre. As with ^F, an overlap makes no sense for anything * but the first screen. We do it the historical way as there's * no good reason to change it. * * If the screen has been split, use the smaller of the current * window size and the window option value. * * It possible for this calculation to be less than 1; move at * least one line. */ offset = (F_ISSET(vp, VC_C1SET) ? vp->count : 1) * (IS_SPLIT(sp) ? MIN(sp->t_maxrows, O_VAL(sp, O_WINDOW)) : O_VAL(sp, O_WINDOW)); offset = offset <= 2 ? 1 : offset - 2; if (vs_sm_scroll(sp, &vp->m_stop, offset, CNTRL_B)) return (1); vp->m_final = vp->m_stop; return (0); } /* * v_lineup -- [count]^Y * Page up by lines. * * PUBLIC: int v_lineup __P((SCR *, VICMD *)); */ int v_lineup(sp, vp) SCR *sp; VICMD *vp; { /* * The cursor moves down, staying with its original line, unless it * reaches the bottom of the screen. */ if (vs_sm_scroll(sp, &vp->m_stop, F_ISSET(vp, VC_C1SET) ? vp->count : 1, CNTRL_Y)) return (1); vp->m_final = vp->m_stop; return (0); } /* * v_linedown -- [count]^E * Page down by lines. * * PUBLIC: int v_linedown __P((SCR *, VICMD *)); */ int v_linedown(sp, vp) SCR *sp; VICMD *vp; { /* * The cursor moves up, staying with its original line, unless it * reaches the top of the screen. */ if (vs_sm_scroll(sp, &vp->m_stop, F_ISSET(vp, VC_C1SET) ? vp->count : 1, CNTRL_E)) return (1); vp->m_final = vp->m_stop; return (0); } vigor-0.016.orig/vi/v_search.c0100644000076400007640000003107507103707240014650 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_search.c 10.18 (Berkeley) 9/19/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static int v_exaddr __P((SCR *, VICMD *, dir_t)); static int v_search __P((SCR *, VICMD *, char *, size_t, u_int, dir_t)); /* * v_srch -- [count]?RE[? offset] * Ex address search backward. * * PUBLIC: int v_searchb __P((SCR *, VICMD *)); */ int v_searchb(sp, vp) SCR *sp; VICMD *vp; { return (v_exaddr(sp, vp, BACKWARD)); } /* * v_searchf -- [count]/RE[/ offset] * Ex address search forward. * * PUBLIC: int v_searchf __P((SCR *, VICMD *)); */ int v_searchf(sp, vp) SCR *sp; VICMD *vp; { return (v_exaddr(sp, vp, FORWARD)); } /* * v_exaddr -- * Do a vi search (which is really an ex address). */ static int v_exaddr(sp, vp, dir) SCR *sp; VICMD *vp; dir_t dir; { static EXCMDLIST fake = { "search" }; EXCMD *cmdp; GS *gp; TEXT *tp; recno_t s_lno; size_t len, s_cno, tlen; int err, nb, type; char *cmd, *t, buf[20]; /* * !!! * If using the search command as a motion, any addressing components * are lost, i.e. y/ptrn/+2, when repeated, is the same as y/ptrn/. */ if (F_ISSET(vp, VC_ISDOT)) return (v_search(sp, vp, NULL, 0, SEARCH_PARSE | SEARCH_MSG | SEARCH_SET, dir)); /* Get the search pattern. */ if (v_tcmd(sp, vp, dir == BACKWARD ? CH_BSEARCH : CH_FSEARCH, TXT_BS | TXT_CR | TXT_ESCAPE | TXT_PROMPT | (O_ISSET(sp, O_SEARCHINCR) ? TXT_SEARCHINCR : 0))) return (1); tp = sp->tiq.cqh_first; /* If the user backspaced over the prompt, do nothing. */ if (tp->term == TERM_BS) return (1); /* * If the user was doing an incremental search, then we've already * updated the cursor and moved to the right location. Return the * correct values, we're done. */ if (tp->term == TERM_SEARCH) { vp->m_stop.lno = sp->lno; vp->m_stop.cno = sp->cno; if (ISMOTION(vp)) return (v_correct(sp, vp, 0)); vp->m_final = vp->m_stop; return (0); } /* * If the user entered or , the length is * 1 and the right thing will happen, i.e. the prompt will be used * as a command character. * * Build a fake ex command structure. */ gp = sp->gp; gp->excmd.cp = tp->lb; gp->excmd.clen = tp->len; F_INIT(&gp->excmd, E_VISEARCH); /* * XXX * Warn if the search wraps. This is a pretty special case, but it's * nice feature that wasn't in the original implementations of ex/vi. * (It was added at some point to System V's version.) This message * is only displayed if there are no keys in the queue. The problem is * the command is going to succeed, and the message is informational, * not an error. If a macro displays it repeatedly, e.g., the pattern * only occurs once in the file and wrapscan is set, you lose big. For * example, if the macro does something like: * * :map K /pattern/^MjK * * Each search will display the message, but the following "/pattern/" * will immediately overwrite it, with strange results. The System V * vi displays the "wrapped" message multiple times, but because it's * overwritten each time, it's not as noticeable. As we don't discard * messages, it's a real problem for us. */ if (!KEYS_WAITING(sp)) F_SET(&gp->excmd, E_SEARCH_WMSG); /* Save the current line/column. */ s_lno = sp->lno; s_cno = sp->cno; /* * !!! * Historically, vi / and ? commands were full-blown ex addresses, * including ';' delimiters, trailing 's, multiple search * strings (separated by semi-colons) and, finally, full-blown z * commands after the / and ? search strings. (If the search was * being used as a motion, the trailing z command was ignored. * Also, we do some argument checking on the z command, to be sure * that it's not some other random command.) For multiple search * strings, leading 's at the second and subsequent strings * were eaten as well. This has some (unintended?) side-effects: * the command /ptrn/;3 is legal and results in moving to line 3. * I suppose you could use it to optionally move to line 3... * * !!! * Historically, if any part of the search command failed, the cursor * remained unmodified (even if ; was used). We have to play games * because the underlying ex parser thinks we're modifying the cursor * as we go, but I think we're compatible with historic practice. * * !!! * Historically, the command "/STRING/; " failed, apparently it * confused the parser. We're not that compatible. */ cmdp = &gp->excmd; if (ex_range(sp, cmdp, &err)) return (1); /* * Remember where any remaining command information is, and clean * up the fake ex command. */ cmd = cmdp->cp; len = cmdp->clen; gp->excmd.clen = 0; if (err) goto err2; /* Copy out the new cursor position and make sure it's okay. */ switch (cmdp->addrcnt) { case 1: vp->m_stop = cmdp->addr1; break; case 2: vp->m_stop = cmdp->addr2; break; } if (!db_exist(sp, vp->m_stop.lno)) { ex_badaddr(sp, &fake, vp->m_stop.lno == 0 ? A_ZERO : A_EOF, NUM_OK); goto err2; } /* * !!! * Historic practice is that a trailing 'z' was ignored if it was a * motion command. Should probably be an error, but not worth the * effort. */ if (ISMOTION(vp)) return (v_correct(sp, vp, F_ISSET(cmdp, E_DELTA))); /* * !!! * Historically, if it wasn't a motion command, a delta in the search * pattern turns it into a first nonblank movement. */ nb = F_ISSET(cmdp, E_DELTA); /* Check for the 'z' command. */ if (len != 0) { if (*cmd != 'z') goto err1; /* No blanks, just like the z command. */ for (t = cmd + 1, tlen = len - 1; tlen > 0; ++t, --tlen) if (!isdigit(*t)) break; if (tlen && (*t == '-' || *t == '.' || *t == '+' || *t == '^')) { ++t; --tlen; type = 1; } else type = 0; if (tlen) goto err1; /* The z command will do the nonblank for us. */ nb = 0; /* Default to z+. */ if (!type && v_event_push(sp, NULL, "+", 1, CH_NOMAP | CH_QUOTED)) return (1); /* Push the user's command. */ if (v_event_push(sp, NULL, cmd, len, CH_NOMAP | CH_QUOTED)) return (1); /* Push line number so get correct z display. */ tlen = snprintf(buf, sizeof(buf), "%lu", (u_long)vp->m_stop.lno); if (v_event_push(sp, NULL, buf, tlen, CH_NOMAP | CH_QUOTED)) return (1); /* Don't refresh until after 'z' happens. */ F_SET(VIP(sp), VIP_S_REFRESH); } /* Non-motion commands move to the end of the range. */ vp->m_final = vp->m_stop; if (nb) { F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SETFNB); } return (0); err1: msgq(sp, M_ERR, "188|Characters after search string, line offset and/or z command"); err2: vp->m_final.lno = s_lno; vp->m_final.cno = s_cno; return (1); } /* * v_searchN -- N * Reverse last search. * * PUBLIC: int v_searchN __P((SCR *, VICMD *)); */ int v_searchN(sp, vp) SCR *sp; VICMD *vp; { dir_t dir; switch (sp->searchdir) { case BACKWARD: dir = FORWARD; break; case FORWARD: dir = BACKWARD; break; default: dir = sp->searchdir; break; } return (v_search(sp, vp, NULL, 0, SEARCH_PARSE, dir)); } /* * v_searchn -- n * Repeat last search. * * PUBLIC: int v_searchn __P((SCR *, VICMD *)); */ int v_searchn(sp, vp) SCR *sp; VICMD *vp; { return (v_search(sp, vp, NULL, 0, SEARCH_PARSE, sp->searchdir)); } /* * v_searchw -- [count]^A * Search for the word under the cursor. * * PUBLIC: int v_searchw __P((SCR *, VICMD *)); */ int v_searchw(sp, vp) SCR *sp; VICMD *vp; { size_t blen, len; int rval; char *bp; len = VIP(sp)->klen + sizeof(RE_WSTART) + sizeof(RE_WSTOP); GET_SPACE_RET(sp, bp, blen, len); len = snprintf(bp, blen, "%s%s%s", RE_WSTART, VIP(sp)->keyw, RE_WSTOP); rval = v_search(sp, vp, bp, len, SEARCH_SET, FORWARD); FREE_SPACE(sp, bp, blen); return (rval); } /* * v_search -- * The search commands. */ static int v_search(sp, vp, ptrn, plen, flags, dir) SCR *sp; VICMD *vp; u_int flags; char *ptrn; size_t plen; dir_t dir; { /* Display messages. */ LF_SET(SEARCH_MSG); /* If it's a motion search, offset past end-of-line is okay. */ if (ISMOTION(vp)) LF_SET(SEARCH_EOL); /* * XXX * Warn if the search wraps. See the comment above, in v_exaddr(). */ if (!KEYS_WAITING(sp)) LF_SET(SEARCH_WMSG); switch (dir) { case BACKWARD: if (b_search(sp, &vp->m_start, &vp->m_stop, ptrn, plen, NULL, flags)) return (1); break; case FORWARD: if (f_search(sp, &vp->m_start, &vp->m_stop, ptrn, plen, NULL, flags)) return (1); break; case NOTSET: msgq(sp, M_ERR, "189|No previous search pattern"); return (1); default: abort(); } /* Correct motion commands, otherwise, simply move to the location. */ if (ISMOTION(vp)) { if (v_correct(sp, vp, 0)) return(1); } else vp->m_final = vp->m_stop; return (0); } /* * v_correct -- * Handle command with a search as the motion. * * !!! * Historically, commands didn't affect the line searched to/from if the * motion command was a search and the final position was the start/end * of the line. There were some special cases and vi was not consistent; * it was fairly easy to confuse it. For example, given the two lines: * * abcdefghi * ABCDEFGHI * * placing the cursor on the 'A' and doing y?$ would so confuse it that 'h' * 'k' and put would no longer work correctly. In any case, we try to do * the right thing, but it's not going to exactly match historic practice. * * PUBLIC: int v_correct __P((SCR *, VICMD *, int)); */ int v_correct(sp, vp, isdelta) SCR *sp; VICMD *vp; int isdelta; { dir_t dir; MARK m; size_t len; /* * !!! * We may have wrapped if wrapscan was set, and we may have returned * to the position where the cursor started. Historic vi didn't cope * with this well. Yank wouldn't beep, but the first put after the * yank would move the cursor right one column (without adding any * text) and the second would put a copy of the current line. The * change and delete commands would beep, but would leave the cursor * on the colon command line. I believe that there are macros that * depend on delete, at least, failing. For now, commands that use * search as a motion component fail when the search returns to the * original cursor position. */ if (vp->m_start.lno == vp->m_stop.lno && vp->m_start.cno == vp->m_stop.cno) { msgq(sp, M_BERR, "190|Search wrapped to original position"); return (1); } /* * !!! * Searches become line mode operations if there was a delta specified * to the search pattern. */ if (isdelta) F_SET(vp, VM_LMODE); /* * If the motion is in the reverse direction, switch the start and * stop MARK's so that it's in a forward direction. (There's no * reason for this other than to make the tests below easier. The * code in vi.c:vi() would have done the switch.) Both forward * and backward motions can happen for any kind of search command * because of the wrapscan option. */ if (vp->m_start.lno > vp->m_stop.lno || vp->m_start.lno == vp->m_stop.lno && vp->m_start.cno > vp->m_stop.cno) { m = vp->m_start; vp->m_start = vp->m_stop; vp->m_stop = m; dir = BACKWARD; } else dir = FORWARD; /* * BACKWARD: * Delete and yank commands move to the end of the range. * Ignore others. * * FORWARD: * Delete and yank commands don't move. Ignore others. */ vp->m_final = vp->m_start; /* * !!! * Delta'd searches don't correct based on column positions. */ if (isdelta) return (0); /* * !!! * Backward searches starting at column 0, and forward searches ending * at column 0 are corrected to the last column of the previous line. * Otherwise, adjust the starting/ending point to the character before * the current one (this is safe because we know the search had to move * to succeed). * * Searches become line mode operations if they start at the first * nonblank and end at column 0 of another line. */ if (vp->m_start.lno < vp->m_stop.lno && vp->m_stop.cno == 0) { if (db_get(sp, --vp->m_stop.lno, DBG_FATAL, NULL, &len)) return (1); vp->m_stop.cno = len ? len - 1 : 0; len = 0; if (nonblank(sp, vp->m_start.lno, &len)) return (1); if (vp->m_start.cno <= len) F_SET(vp, VM_LMODE); } else --vp->m_stop.cno; return (0); } vigor-0.016.orig/vi/v_section.c0100644000076400007640000001451207103707240015044 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_section.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * !!! * In historic vi, the section commands ignored empty lines, unlike the * paragraph commands, which was probably okay. However, they also moved * to the start of the last line when there where no more sections instead * of the end of the last line like the paragraph commands. I've changed * the latter behavior to match the paragraph commands. * * In historic vi, a section was defined as the first character(s) of the * line matching, which could be followed by anything. This implementation * follows that historic practice. * * !!! * The historic vi documentation (USD:15-10) claimed: * The section commands interpret a preceding count as a different * window size in which to redraw the screen at the new location, * and this window size is the base size for newly drawn windows * until another size is specified. This is very useful if you are * on a slow terminal ... * * I can't get the 4BSD vi to do this, it just beeps at me. For now, a * count to the section commands simply repeats the command. */ /* * v_sectionf -- [count]]] * Move forward count sections/functions. * * !!! * Using ]] as a motion command was a bit special, historically. It could * match } as well as the usual { and section values. If it matched a { or * a section, it did NOT include the matched line. If it matched a }, it * did include the line. No clue why. * * PUBLIC: int v_sectionf __P((SCR *, VICMD *)); */ int v_sectionf(sp, vp) SCR *sp; VICMD *vp; { recno_t cnt, lno; size_t len; char *p, *list, *lp; /* Get the macro list. */ if ((list = O_STR(sp, O_SECTIONS)) == NULL) return (1); /* * !!! * If the starting cursor position is at or before any non-blank * characters in the line, i.e. the movement is cutting all of the * line's text, the buffer is in line mode. It's a lot easier to * check here, because we know that the end is going to be the start * or end of a line. */ if (ISMOTION(vp)) if (vp->m_start.cno == 0) F_SET(vp, VM_LMODE); else { vp->m_stop = vp->m_start; vp->m_stop.cno = 0; if (nonblank(sp, vp->m_stop.lno, &vp->m_stop.cno)) return (1); if (vp->m_start.cno <= vp->m_stop.cno) F_SET(vp, VM_LMODE); } cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; for (lno = vp->m_start.lno; !db_get(sp, ++lno, 0, &p, &len);) { if (len == 0) continue; if (p[0] == '{' || ISMOTION(vp) && p[0] == '}') { if (!--cnt) { if (p[0] == '{') goto adjust1; goto adjust2; } continue; } /* * !!! * Historic documentation (USD:15-11, 4.2) said that formfeed * characters (^L) in the first column delimited sections. * The historic code mentions formfeed characters, but never * implements them. Seems reasonable, do it. */ if (p[0] == '\014') { if (!--cnt) goto adjust1; continue; } if (p[0] != '.' || len < 2) continue; for (lp = list; *lp != '\0'; lp += 2 * sizeof(*lp)) if (lp[0] == p[1] && (lp[1] == ' ' && len == 2 || lp[1] == p[2]) && !--cnt) { /* * !!! * If not cutting this line, adjust to the end * of the previous one. Otherwise, position to * column 0. */ adjust1: if (ISMOTION(vp)) goto ret1; adjust2: vp->m_stop.lno = lno; vp->m_stop.cno = 0; goto ret2; } } /* If moving forward, reached EOF, check to see if we started there. */ if (vp->m_start.lno == lno - 1) { v_eof(sp, NULL); return (1); } ret1: if (db_get(sp, --lno, DBG_FATAL, NULL, &len)) return (1); vp->m_stop.lno = lno; vp->m_stop.cno = len ? len - 1 : 0; /* * Non-motion commands go to the end of the range. Delete and * yank stay at the start of the range. Ignore others. */ ret2: if (ISMOTION(vp)) { vp->m_final = vp->m_start; if (F_ISSET(vp, VM_LMODE)) vp->m_final.cno = 0; } else vp->m_final = vp->m_stop; return (0); } /* * v_sectionb -- [count][[ * Move backward count sections/functions. * * PUBLIC: int v_sectionb __P((SCR *, VICMD *)); */ int v_sectionb(sp, vp) SCR *sp; VICMD *vp; { size_t len; recno_t cnt, lno; char *p, *list, *lp; /* An empty file or starting from line 1 is always illegal. */ if (vp->m_start.lno <= 1) { v_sof(sp, NULL); return (1); } /* Get the macro list. */ if ((list = O_STR(sp, O_SECTIONS)) == NULL) return (1); cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; for (lno = vp->m_start.lno; !db_get(sp, --lno, 0, &p, &len);) { if (len == 0) continue; if (p[0] == '{') { if (!--cnt) goto adjust1; continue; } /* * !!! * Historic documentation (USD:15-11, 4.2) said that formfeed * characters (^L) in the first column delimited sections. * The historic code mentions formfeed characters, but never * implements them. Seems reasonable, do it. */ if (p[0] == '\014') { if (!--cnt) goto adjust1; continue; } if (p[0] != '.' || len < 2) continue; for (lp = list; *lp != '\0'; lp += 2 * sizeof(*lp)) if (lp[0] == p[1] && (lp[1] == ' ' && len == 2 || lp[1] == p[2]) && !--cnt) { adjust1: vp->m_stop.lno = lno; vp->m_stop.cno = 0; goto ret1; } } /* * If moving backward, reached SOF, which is a movement sink. * We already checked for starting there. */ vp->m_stop.lno = 1; vp->m_stop.cno = 0; /* * All commands move to the end of the range. * * !!! * Historic practice is the section cut was in line mode if it started * from column 0 and was in the backward direction. Otherwise, left * motion commands adjust the starting point to the character before * the current one. What makes this worse is that if it cut to line * mode it also went to the first non-. */ ret1: if (vp->m_start.cno == 0) { F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SETFNB); --vp->m_start.lno; F_SET(vp, VM_LMODE); } else --vp->m_start.cno; vp->m_final = vp->m_stop; return (0); } vigor-0.016.orig/vi/v_sentence.c0100644000076400007640000002053207103707240015203 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_sentence.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * !!! * In historic vi, a sentence was delimited by a '.', '?' or '!' character * followed by TWO spaces or a newline. One or more empty lines was also * treated as a separate sentence. The Berkeley documentation for historical * vi states that any number of ')', ']', '"' and '\'' characters can be * between the delimiter character and the spaces or end of line, however, * the historical implementation did not handle additional '"' characters. * We follow the documentation here, not the implementation. * * Once again, historical vi didn't do sentence movements associated with * counts consistently, mostly in the presence of lines containing only * white-space characters. * * This implementation also permits a single tab to delimit sentences, and * treats lines containing only white-space characters as empty lines. * Finally, tabs are eaten (along with spaces) when skipping to the start * of the text following a "sentence". */ /* * v_sentencef -- [count]) * Move forward count sentences. * * PUBLIC: int v_sentencef __P((SCR *, VICMD *)); */ int v_sentencef(sp, vp) SCR *sp; VICMD *vp; { enum { BLANK, NONE, PERIOD } state; VCS cs; size_t len; u_long cnt; cs.cs_lno = vp->m_start.lno; cs.cs_cno = vp->m_start.cno; if (cs_init(sp, &cs)) return (1); cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; /* * !!! * If in white-space, the next start of sentence counts as one. * This may not handle " . " correctly, but it's real unclear * what correctly means in that case. */ if (cs.cs_flags == CS_EMP || cs.cs_flags == 0 && isblank(cs.cs_ch)) { if (cs_fblank(sp, &cs)) return (1); if (--cnt == 0) { if (vp->m_start.lno != cs.cs_lno || vp->m_start.cno != cs.cs_cno) goto okret; return (1); } } for (state = NONE;;) { if (cs_next(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) break; if (cs.cs_flags == CS_EOL) { if ((state == PERIOD || state == BLANK) && --cnt == 0) { if (cs_next(sp, &cs)) return (1); if (cs.cs_flags == 0 && isblank(cs.cs_ch) && cs_fblank(sp, &cs)) return (1); goto okret; } state = NONE; continue; } if (cs.cs_flags == CS_EMP) { /* An EMP is two sentences. */ if (--cnt == 0) goto okret; if (cs_fblank(sp, &cs)) return (1); if (--cnt == 0) goto okret; state = NONE; continue; } switch (cs.cs_ch) { case '.': case '?': case '!': state = PERIOD; break; case ')': case ']': case '"': case '\'': if (state != PERIOD) state = NONE; break; case '\t': if (state == PERIOD) state = BLANK; /* FALLTHROUGH */ case ' ': if (state == PERIOD) { state = BLANK; break; } if (state == BLANK && --cnt == 0) { if (cs_fblank(sp, &cs)) return (1); goto okret; } /* FALLTHROUGH */ default: state = NONE; break; } } /* EOF is a movement sink, but it's an error not to have moved. */ if (vp->m_start.lno == cs.cs_lno && vp->m_start.cno == cs.cs_cno) { v_eof(sp, NULL); return (1); } okret: vp->m_stop.lno = cs.cs_lno; vp->m_stop.cno = cs.cs_cno; /* * !!! * Historic, uh, features, yeah, that's right, call 'em features. * If the starting and ending cursor positions are at the first * column in their lines, i.e. the movement is cutting entire lines, * the buffer is in line mode, and the ending position is the last * character of the previous line. Note check to make sure that * it's not within a single line. * * Non-motion commands move to the end of the range. Delete and * yank stay at the start. Ignore others. Adjust the end of the * range for motion commands. */ if (ISMOTION(vp)) { if (vp->m_start.cno == 0 && (cs.cs_flags != 0 || vp->m_stop.cno == 0)) { if (vp->m_start.lno < vp->m_stop.lno) { if (db_get(sp, --vp->m_stop.lno, DBG_FATAL, NULL, &len)) return (1); vp->m_stop.cno = len ? len - 1 : 0; } F_SET(vp, VM_LMODE); } else --vp->m_stop.cno; vp->m_final = vp->m_start; } else vp->m_final = vp->m_stop; return (0); } /* * v_sentenceb -- [count]( * Move backward count sentences. * * PUBLIC: int v_sentenceb __P((SCR *, VICMD *)); */ int v_sentenceb(sp, vp) SCR *sp; VICMD *vp; { VCS cs; recno_t slno; size_t len, scno; u_long cnt; int last; /* * !!! * Historic vi permitted the user to hit SOF repeatedly. */ if (vp->m_start.lno == 1 && vp->m_start.cno == 0) return (0); cs.cs_lno = vp->m_start.lno; cs.cs_cno = vp->m_start.cno; if (cs_init(sp, &cs)) return (1); cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; /* * !!! * In empty lines, skip to the previous non-white-space character. * If in text, skip to the prevous white-space character. Believe * it or not, in the paragraph: * ab cd. * AB CD. * if the cursor is on the 'A' or 'B', ( moves to the 'a'. If it * is on the ' ', 'C' or 'D', it moves to the 'A'. Yes, Virginia, * Berkeley was once a major center of drug activity. */ if (cs.cs_flags == CS_EMP) { if (cs_bblank(sp, &cs)) return (1); for (;;) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags != CS_EOL) break; } } else if (cs.cs_flags == 0 && !isblank(cs.cs_ch)) for (;;) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags != 0 || isblank(cs.cs_ch)) break; } for (last = 0;;) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags == CS_SOF) /* SOF is a movement sink. */ break; if (cs.cs_flags == CS_EOL) { last = 1; continue; } if (cs.cs_flags == CS_EMP) { if (--cnt == 0) goto ret; if (cs_bblank(sp, &cs)) return (1); last = 0; continue; } switch (cs.cs_ch) { case '.': case '?': case '!': if (!last || --cnt != 0) { last = 0; continue; } ret: slno = cs.cs_lno; scno = cs.cs_cno; /* * Move to the start of the sentence, skipping blanks * and special characters. */ do { if (cs_next(sp, &cs)) return (1); } while (!cs.cs_flags && (cs.cs_ch == ')' || cs.cs_ch == ']' || cs.cs_ch == '"' || cs.cs_ch == '\'')); if ((cs.cs_flags || isblank(cs.cs_ch)) && cs_fblank(sp, &cs)) return (1); /* * If it was ". xyz", with the cursor on the 'x', or * "end. ", with the cursor in the spaces, or the * beginning of a sentence preceded by an empty line, * we can end up where we started. Fix it. */ if (vp->m_start.lno != cs.cs_lno || vp->m_start.cno != cs.cs_cno) goto okret; /* * Well, if an empty line preceded possible blanks * and the sentence, it could be a real sentence. */ for (;;) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags == CS_EOL) continue; if (cs.cs_flags == 0 && isblank(cs.cs_ch)) continue; break; } if (cs.cs_flags == CS_EMP) goto okret; /* But it wasn't; try again. */ ++cnt; cs.cs_lno = slno; cs.cs_cno = scno; last = 0; break; case '\t': last = 1; break; default: last = cs.cs_flags == CS_EOL || isblank(cs.cs_ch) || cs.cs_ch == ')' || cs.cs_ch == ']' || cs.cs_ch == '"' || cs.cs_ch == '\'' ? 1 : 0; } } okret: vp->m_stop.lno = cs.cs_lno; vp->m_stop.cno = cs.cs_cno; /* * !!! * If the starting and stopping cursor positions are at the first * columns in the line, i.e. the movement is cutting an entire line, * the buffer is in line mode, and the starting position is the last * character of the previous line. * * All commands move to the end of the range. Adjust the start of * the range for motion commands. */ if (ISMOTION(vp)) if (vp->m_start.cno == 0 && (cs.cs_flags != 0 || vp->m_stop.cno == 0)) { if (db_get(sp, --vp->m_start.lno, DBG_FATAL, NULL, &len)) return (1); vp->m_start.cno = len ? len - 1 : 0; F_SET(vp, VM_LMODE); } else --vp->m_start.cno; vp->m_final = vp->m_stop; return (0); } vigor-0.016.orig/vi/v_status.c0100644000076400007640000000144307103707240014722 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_status.c 10.9 (Berkeley) 5/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_status -- ^G * Show the file status. * * PUBLIC: int v_status __P((SCR *, VICMD *)); */ int v_status(sp, vp) SCR *sp; VICMD *vp; { (void)msgq_status(sp, vp->m_start.lno, MSTAT_SHOWLAST); return (0); } vigor-0.016.orig/vi/v_txt.c0100644000076400007640000023452607103707240014230 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_txt.c 10.87 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static int txt_abbrev __P((SCR *, TEXT *, CHAR_T *, int, int *, int *)); static void txt_ai_resolve __P((SCR *, TEXT *, int *)); static TEXT *txt_backup __P((SCR *, TEXTH *, TEXT *, u_int32_t *)); static int txt_dent __P((SCR *, TEXT *, int)); static int txt_emark __P((SCR *, TEXT *, size_t)); static void txt_err __P((SCR *, TEXTH *)); static int txt_fc __P((SCR *, TEXT *, int *)); static int txt_fc_col __P((SCR *, int, ARGS **)); static int txt_hex __P((SCR *, TEXT *)); static int txt_insch __P((SCR *, TEXT *, CHAR_T *, u_int)); static int txt_isrch __P((SCR *, VICMD *, TEXT *, u_int8_t *)); static int txt_map_end __P((SCR *)); static int txt_map_init __P((SCR *)); static int txt_margin __P((SCR *, TEXT *, TEXT *, int *, u_int32_t)); static void txt_nomorech __P((SCR *)); static void txt_Rresolve __P((SCR *, TEXTH *, TEXT *, const size_t)); static int txt_resolve __P((SCR *, TEXTH *, u_int32_t)); static int txt_showmatch __P((SCR *, TEXT *)); static void txt_unmap __P((SCR *, TEXT *, u_int32_t *)); /* Cursor character (space is hard to track on the screen). */ #if defined(DEBUG) && 0 #undef CH_CURSOR #define CH_CURSOR '+' #endif /* * v_tcmd -- * Fill a buffer from the terminal for vi. * * PUBLIC: int v_tcmd __P((SCR *, VICMD *, ARG_CHAR_T, u_int)); */ int v_tcmd(sp, vp, prompt, flags) SCR *sp; VICMD *vp; ARG_CHAR_T prompt; u_int flags; { /* Normally, we end up where we started. */ vp->m_final.lno = sp->lno; vp->m_final.cno = sp->cno; /* Initialize the map. */ if (txt_map_init(sp)) return (1); /* Move to the last line. */ sp->lno = TMAP[0].lno; sp->cno = 0; /* Don't update the modeline for now. */ F_SET(sp, SC_TINPUT_INFO); /* Set the input flags. */ LF_SET(TXT_APPENDEOL | TXT_CR | TXT_ESCAPE | TXT_INFOLINE | TXT_MAPINPUT); if (O_ISSET(sp, O_ALTWERASE)) LF_SET(TXT_ALTWERASE); if (O_ISSET(sp, O_TTYWERASE)) LF_SET(TXT_TTYWERASE); /* Do the input thing. */ if (v_txt(sp, vp, NULL, NULL, 0, prompt, 0, 1, flags)) return (1); /* Reenable the modeline updates. */ F_CLR(sp, SC_TINPUT_INFO); /* Clean up the map. */ if (txt_map_end(sp)) return (1); if (IS_ONELINE(sp)) F_SET(sp, SC_SCR_REDRAW); /* XXX */ /* Set the cursor to the resulting position. */ sp->lno = vp->m_final.lno; sp->cno = vp->m_final.cno; return (0); } /* * txt_map_init * Initialize the screen map for colon command-line input. */ static int txt_map_init(sp) SCR *sp; { SMAP *esmp; VI_PRIVATE *vip; vip = VIP(sp); if (!IS_ONELINE(sp)) { /* * Fake like the user is doing input on the last line of the * screen. This makes all of the scrolling work correctly, * and allows us the use of the vi text editing routines, not * to mention practically infinite length ex commands. * * Save the current location. */ vip->sv_tm_lno = TMAP->lno; vip->sv_tm_soff = TMAP->soff; vip->sv_tm_coff = TMAP->coff; vip->sv_t_maxrows = sp->t_maxrows; vip->sv_t_minrows = sp->t_minrows; vip->sv_t_rows = sp->t_rows; /* * If it's a small screen, TMAP may be small for the screen. * Fix it, filling in fake lines as we go. */ if (IS_SMALL(sp)) for (esmp = HMAP + (sp->t_maxrows - 1); TMAP < esmp; ++TMAP) { TMAP[1].lno = TMAP[0].lno + 1; TMAP[1].coff = HMAP->coff; TMAP[1].soff = 1; } /* Build the fake entry. */ TMAP[1].lno = TMAP[0].lno + 1; TMAP[1].soff = 1; TMAP[1].coff = 0; SMAP_FLUSH(&TMAP[1]); ++TMAP; /* Reset the screen information. */ sp->t_rows = sp->t_minrows = ++sp->t_maxrows; } return (0); } /* * txt_map_end * Reset the screen map for colon command-line input. */ static int txt_map_end(sp) SCR *sp; { VI_PRIVATE *vip; size_t cnt; vip = VIP(sp); if (!IS_ONELINE(sp)) { /* Restore the screen information. */ sp->t_rows = vip->sv_t_rows; sp->t_minrows = vip->sv_t_minrows; sp->t_maxrows = vip->sv_t_maxrows; /* * If it's a small screen, TMAP may be wrong. Clear any * lines that might have been overwritten. */ if (IS_SMALL(sp)) { for (cnt = sp->t_rows; cnt <= sp->t_maxrows; ++cnt) { (void)sp->gp->scr_move(sp, cnt, 0); (void)sp->gp->scr_clrtoeol(sp); } TMAP = HMAP + (sp->t_rows - 1); } else --TMAP; /* * The map may be wrong if the user entered more than one * (logical) line. Fix it. If the user entered a whole * screen, this will be slow, but we probably don't care. */ if (!O_ISSET(sp, O_LEFTRIGHT)) while (vip->sv_tm_lno != TMAP->lno || vip->sv_tm_soff != TMAP->soff) if (vs_sm_1down(sp)) return (1); } /* * Invalidate the cursor and the line size cache, the line never * really existed. This fixes bugs where the user searches for * the last line on the screen + 1 and the refresh routine thinks * that's where we just were. */ VI_SCR_CFLUSH(vip); F_SET(vip, VIP_CUR_INVALID); return (0); } /* * If doing input mapping on the colon command line, may need to unmap * based on the command. */ #define UNMAP_TST \ FL_ISSET(ec_flags, EC_MAPINPUT) && LF_ISSET(TXT_INFOLINE) /* * Internally, we maintain tp->lno and tp->cno, externally, everyone uses * sp->lno and sp->cno. Make them consistent as necessary. */ #define UPDATE_POSITION(sp, tp) { \ (sp)->lno = (tp)->lno; \ (sp)->cno = (tp)->cno; \ } /* * v_txt -- * Vi text input. * * PUBLIC: int v_txt __P((SCR *, VICMD *, MARK *, * PUBLIC: const char *, size_t, ARG_CHAR_T, recno_t, u_long, u_int32_t)); */ int v_txt(sp, vp, tm, lp, len, prompt, ai_line, rcount, flags) SCR *sp; VICMD *vp; MARK *tm; /* To MARK. */ const char *lp; /* Input line. */ size_t len; /* Input line length. */ ARG_CHAR_T prompt; /* Prompt to display. */ recno_t ai_line; /* Line number to use for autoindent count. */ u_long rcount; /* Replay count. */ u_int32_t flags; /* TXT_* flags. */ { EVENT ev, *evp; /* Current event. */ EVENT fc; /* File name completion event. */ GS *gp; TEXT *ntp, *tp; /* Input text structures. */ TEXT ait; /* Autoindent text structure. */ TEXT wmt; /* Wrapmargin text structure. */ TEXTH *tiqh; VI_PRIVATE *vip; abb_t abb; /* State of abbreviation checks. */ carat_t carat; /* State of the "[^0]^D" sequences. */ quote_t quote; /* State of quotation. */ size_t owrite, insert; /* Temporary copies of TEXT fields. */ size_t margin; /* Wrapmargin value. */ size_t rcol; /* 0-N: insert offset in the replay buffer. */ size_t tcol; /* Temporary column. */ u_int32_t ec_flags; /* Input mapping flags. */ #define IS_RESTART 0x01 /* Reset the incremental search. */ #define IS_RUNNING 0x02 /* Incremental search turned on. */ u_int8_t is_flags; int abcnt, ab_turnoff; /* Abbreviation character count, switch. */ int filec_redraw; /* Redraw after the file completion routine. */ int hexcnt; /* Hex character count. */ int showmatch; /* Showmatch set on this character. */ int wm_set, wm_skip; /* Wrapmargin happened, blank skip flags. */ int max, tmp; char *p; static int intro = 1; /* Introduce insert mode */ gp = sp->gp; vip = VIP(sp); if (!prompt) { vigor_maybe_confirm(25, "\"Do you wish to enter insert mode?\"", gp); if (intro) { intro = 0; vigor_comment("\"You have not entered insert mode before. While you're in insert mode, remember that you need to return to command mode before entering Vigor commands!\"", gp); } } /* * Set the input flag, so tabs get displayed correctly * and everyone knows that the text buffer is in use. */ F_SET(sp, SC_TINPUT); /* * Get one TEXT structure with some initial buffer space, reusing * the last one if it's big enough. (All TEXT bookkeeping fields * default to 0 -- text_init() handles this.) If changing a line, * copy it into the TEXT buffer. */ tiqh = &sp->tiq; if (tiqh->cqh_first != (void *)tiqh) { tp = tiqh->cqh_first; if (tp->q.cqe_next != (void *)tiqh || tp->lb_len < len + 32) { text_lfree(tiqh); goto newtp; } tp->ai = tp->insert = tp->offset = tp->owrite = 0; if (lp != NULL) { tp->len = len; memmove(tp->lb, lp, len); } else tp->len = 0; } else { newtp: if ((tp = text_init(sp, lp, len, len + 32)) == NULL) return (1); CIRCLEQ_INSERT_HEAD(tiqh, tp, q); } /* Set default termination condition. */ tp->term = TERM_OK; /* Set the starting line, column. */ tp->lno = sp->lno; tp->cno = sp->cno; /* * Set the insert and overwrite counts. If overwriting characters, * do insertion afterward. If not overwriting characters, assume * doing insertion. If change is to a mark, emphasize it with an * CH_ENDMARK character. */ if (len) { if (LF_ISSET(TXT_OVERWRITE)) { tp->owrite = (tm->cno - tp->cno) + 1; tp->insert = (len - tm->cno) - 1; } else tp->insert = len - tp->cno; if (LF_ISSET(TXT_EMARK) && txt_emark(sp, tp, tm->cno)) return (1); } /* * Many of the special cases in text input are to handle autoindent * support. Somebody decided that it would be a good idea if "^^D" * and "0^D" deleted all of the autoindented characters. In an editor * that takes single character input from the user, this beggars the * imagination. Note also, "^^D" resets the next lines' autoindent, * but "0^D" doesn't. * * We assume that autoindent only happens on empty lines, so insert * and overwrite will be zero. If doing autoindent, figure out how * much indentation we need and fill it in. Update input column and * screen cursor as necessary. */ if (LF_ISSET(TXT_AUTOINDENT) && ai_line != OOBLNO) { if (v_txt_auto(sp, ai_line, NULL, 0, tp)) return (1); tp->cno = tp->ai; } else { /* * The cc and S commands have a special feature -- leading * characters are handled as autoindent characters. * Beauty! */ if (LF_ISSET(TXT_AICHARS)) { tp->offset = 0; tp->ai = tp->cno; } else tp->offset = tp->cno; } /* If getting a command buffer from the user, there may be a prompt. */ if (LF_ISSET(TXT_PROMPT)) { tp->lb[tp->cno++] = prompt; ++tp->len; ++tp->offset; } /* * If appending after the end-of-line, add a space into the buffer * and move the cursor right. This space is inserted, i.e. pushed * along, and then deleted when the line is resolved. Assumes that * the cursor is already positioned at the end of the line. This * avoids the nastiness of having the cursor reside on a magical * column, i.e. a column that doesn't really exist. The only down * side is that we may wrap lines or scroll the screen before it's * strictly necessary. Not a big deal. */ if (LF_ISSET(TXT_APPENDEOL)) { tp->lb[tp->cno] = CH_CURSOR; ++tp->len; ++tp->insert; (void)vs_change(sp, tp->lno, LINE_RESET); } /* * Historic practice is that the wrapmargin value was a distance * from the RIGHT-HAND margin, not the left. It's more useful to * us as a distance from the left-hand margin, i.e. the same as * the wraplen value. The wrapmargin option is historic practice. * Nvi added the wraplen option so that it would be possible to * edit files with consistent margins without knowing the number of * columns in the window. * * XXX * Setting margin causes a significant performance hit. Normally * we don't update the screen if there are keys waiting, but we * have to if margin is set, otherwise the screen routines don't * know where the cursor is. * * !!! * Abbreviated keys were affected by the wrapmargin option in the * historic 4BSD vi. Mapped keys were usually, but sometimes not. * See the comment in vi/v_text():set_txt_std for more information. * * !!! * One more special case. If an inserted character causes * wrapmargin to split the line, the next user entered character is * discarded if it's a character. */ wm_set = wm_skip = 0; if (LF_ISSET(TXT_WRAPMARGIN)) if ((margin = O_VAL(sp, O_WRAPMARGIN)) != 0) margin = sp->cols - margin; else margin = O_VAL(sp, O_WRAPLEN); else margin = 0; /* Initialize abbreviation checks. */ abcnt = ab_turnoff = 0; abb = F_ISSET(gp, G_ABBREV) && LF_ISSET(TXT_MAPINPUT) ? AB_INWORD : AB_NOTSET; /* * Set up the dot command. Dot commands are done by saving the actual * characters and then reevaluating them so that things like wrapmargin * can change between the insert and the replay. * * !!! * Historically, vi did not remap or reabbreviate replayed input. (It * did beep at you if you changed an abbreviation and then replayed the * input. We're not that compatible.) We don't have to do anything to * avoid remapping, as we're not getting characters from the terminal * routines. Turn the abbreviation check off. * * XXX * It would be nice if we could swallow backspaces and such, but it's * not all that easy to do. What we can do is turn off the common * error messages during the replay. Otherwise, when the user enters * an illegal command, e.g., "Iab", * and then does a '.', they get a list of error messages after command * completion. */ rcol = 0; if (LF_ISSET(TXT_REPLAY)) { abb = AB_NOTSET; LF_CLR(TXT_RECORD); } /* Other text input mode setup. */ quote = Q_NOTSET; carat = C_NOTSET; FL_INIT(is_flags, LF_ISSET(TXT_SEARCHINCR) ? IS_RESTART | IS_RUNNING : 0); filec_redraw = hexcnt = showmatch = 0; /* Initialize input flags. */ ec_flags = LF_ISSET(TXT_MAPINPUT) ? EC_MAPINPUT : 0; /* Refresh the screen. */ UPDATE_POSITION(sp, tp); if (vs_refresh(sp, 1)) return (1); /* If it's dot, just do it now. */ if (F_ISSET(vp, VC_ISDOT)) goto replay; /* Get an event. */ evp = &ev; next: if (v_event_get(sp, evp, 0, ec_flags)) return (1); /* * If file completion overwrote part of the screen and nothing else has * been displayed, clean up. We don't do this as part of the normal * message resolution because we know the user is on the colon command * line and there's no reason to enter explicit characters to continue. */ if (filec_redraw && !F_ISSET(sp, SC_SCR_EXWROTE)) { filec_redraw = 0; fc.e_event = E_REPAINT; fc.e_flno = vip->totalcount >= sp->rows ? 1 : sp->rows - vip->totalcount; fc.e_tlno = sp->rows; vip->linecount = vip->lcontinue = vip->totalcount = 0; (void)vs_repaint(sp, &fc); (void)vs_refresh(sp, 1); } /* Deal with all non-character events. */ switch (evp->e_event) { case E_CHARACTER: break; case E_ERR: case E_EOF: F_SET(sp, SC_EXIT_FORCE); return (1); case E_INTERRUPT: /* * !!! * Historically, exited the user from text input * mode or cancelled a colon command, and returned to command * mode. It also beeped the terminal, but that seems a bit * excessive. */ goto k_escape; case E_REPAINT: if (vs_repaint(sp, &ev)) return (1); goto next; case E_WRESIZE: /* interrupts the input mode. */ v_emsg(sp, NULL, VIM_WRESIZE); goto k_escape; default: v_event_err(sp, evp); goto k_escape; } /* * !!! * If the first character of the input is a nul, replay the previous * input. (Historically, it's okay to replay non-existent input.) * This was not documented as far as I know, and is a great test of vi * clones. */ if (rcol == 0 && !LF_ISSET(TXT_REPLAY) && evp->e_c == '\0') { if (vip->rep == NULL) goto done; abb = AB_NOTSET; LF_CLR(TXT_RECORD); LF_SET(TXT_REPLAY); goto replay; } /* * File name completion and colon command-line editing. We don't * have enough meta characters, so we expect people to overload * them. If the two characters are the same, then we do file name * completion if the cursor is past the first column, and do colon * command-line editing if it's not. */ if (quote == Q_NOTSET) { int L__cedit, L__filec; L__cedit = L__filec = 0; if (LF_ISSET(TXT_CEDIT) && O_STR(sp, O_CEDIT) != NULL && O_STR(sp, O_CEDIT)[0] == evp->e_c) L__cedit = 1; if (LF_ISSET(TXT_FILEC) && O_STR(sp, O_FILEC) != NULL && O_STR(sp, O_FILEC)[0] == evp->e_c) L__filec = 1; if (L__cedit == 1 && (L__filec == 0 || tp->cno == tp->offset)) { tp->term = TERM_CEDIT; goto k_escape; } if (L__filec == 1) { if (txt_fc(sp, tp, &filec_redraw)) goto err; goto resolve; } } /* Abbreviation overflow check. See comment in txt_abbrev(). */ #define MAX_ABBREVIATION_EXPANSION 256 if (F_ISSET(&evp->e_ch, CH_ABBREVIATED)) { if (++abcnt > MAX_ABBREVIATION_EXPANSION) { if (v_event_flush(sp, CH_ABBREVIATED)) msgq(sp, M_ERR, "191|Abbreviation exceeded expansion limit: characters discarded"); abcnt = 0; if (LF_ISSET(TXT_REPLAY)) goto done; goto resolve; } } else abcnt = 0; /* Check to see if the character fits into the replay buffers. */ if (LF_ISSET(TXT_RECORD)) { BINC_GOTO(sp, vip->rep, vip->rep_len, (rcol + 1) * sizeof(EVENT)); vip->rep[rcol++] = *evp; } replay: if (LF_ISSET(TXT_REPLAY)) evp = vip->rep + rcol++; /* Wrapmargin check for leading space. */ if (wm_skip) { wm_skip = 0; if (evp->e_c == ' ') goto resolve; } /* If quoted by someone else, simply insert the character. */ if (F_ISSET(&evp->e_ch, CH_QUOTED)) goto insq_ch; /* * !!! * If this character was quoted by a K_VLNEXT or a backslash, replace * the placeholder (a carat or a backslash) with the new character. * If it was quoted by a K_VLNEXT, we've already adjusted the cursor * because it has to appear on top of the placeholder character. If * it was quoted by a backslash, adjust the cursor now, the cursor * doesn't appear on top of it. Historic practice in both cases. * * Skip tests for abbreviations; ":ab xa XA" followed by "ixa^V" * doesn't perform an abbreviation. Special case, ^V^J (not ^V^M) is * the same as ^J, historically. */ if (quote == Q_BTHIS || quote == Q_VTHIS) { FL_CLR(ec_flags, EC_QUOTED); if (LF_ISSET(TXT_MAPINPUT)) FL_SET(ec_flags, EC_MAPINPUT); if (quote == Q_BTHIS && (evp->e_value == K_VERASE || evp->e_value == K_VKILL)) { quote = Q_NOTSET; --tp->cno; ++tp->owrite; goto insl_ch; } if (quote == Q_VTHIS && evp->e_value != K_NL) { quote = Q_NOTSET; goto insl_ch; } quote = Q_NOTSET; } /* * !!! * Translate "[isxdigit()]*" to a character with a hex value: * this test delimits the value by any non-hex character. Offset by * one, we use 0 to mean that we've found . */ if (hexcnt > 1 && !isxdigit(evp->e_c)) { hexcnt = 0; if (txt_hex(sp, tp)) goto err; } switch (evp->e_value) { case K_CR: /* Carriage return. */ case K_NL: /* New line. */ /* Return in script windows and the command line. */ k_cr: if (LF_ISSET(TXT_CR)) { /* * If this was a map, we may have not displayed * the line. Display it, just in case. * * If a script window and not the colon line, * push a so it gets executed. */ if (LF_ISSET(TXT_INFOLINE)) { if (vs_change(sp, tp->lno, LINE_RESET)) goto err; } else if (F_ISSET(sp, SC_SCRIPT)) (void)v_event_push(sp, NULL, "\r", 1, CH_NOMAP); /* Set term condition: if empty. */ if (tp->cno <= tp->offset) tp->term = TERM_CR; /* * Set term condition: if searching incrementally and * the user entered a pattern, return a completed * search, regardless if the entire pattern was found. */ if (FL_ISSET(is_flags, IS_RUNNING) && tp->cno >= tp->offset + 1) tp->term = TERM_SEARCH; goto k_escape; } #define LINE_RESOLVE { \ /* \ * Handle abbreviations. If there was one, discard the \ * replay characters. \ */ \ if (abb == AB_INWORD && \ !LF_ISSET(TXT_REPLAY) && F_ISSET(gp, G_ABBREV)) { \ if (txt_abbrev(sp, tp, &evp->e_c, \ LF_ISSET(TXT_INFOLINE), &tmp, \ &ab_turnoff)) \ goto err; \ if (tmp) { \ if (LF_ISSET(TXT_RECORD)) \ rcol -= tmp + 1; \ goto resolve; \ } \ } \ if (abb != AB_NOTSET) \ abb = AB_NOTWORD; \ if (UNMAP_TST) \ txt_unmap(sp, tp, &ec_flags); \ /* \ * Delete any appended cursor. It's possible to get in \ * situations where TXT_APPENDEOL is set but tp->insert \ * is 0 when using the R command and all the characters \ * are tp->owrite characters. \ */ \ if (LF_ISSET(TXT_APPENDEOL) && tp->insert > 0) { \ --tp->len; \ --tp->insert; \ } \ } LINE_RESOLVE; /* * Save the current line information for restoration in * txt_backup(), and set the line final length. */ tp->sv_len = tp->len; tp->sv_cno = tp->cno; tp->len = tp->cno; /* Update the old line. */ if (vs_change(sp, tp->lno, LINE_RESET)) goto err; /* * Historic practice, when the autoindent edit option was set, * was to delete characters following the inserted * newline. This affected the 'R', 'c', and 's' commands; 'c' * and 's' retained the insert characters only, 'R' moved the * overwrite and insert characters into the next TEXT structure. * We keep track of the number of characters erased for the 'R' * command so that the final resolution of the line is correct. */ tp->R_erase = 0; owrite = tp->owrite; insert = tp->insert; if (LF_ISSET(TXT_REPLACE) && owrite != 0) { for (p = tp->lb + tp->cno; owrite > 0 && isblank(*p); ++p, --owrite, ++tp->R_erase); if (owrite == 0) for (; insert > 0 && isblank(*p); ++p, ++tp->R_erase, --insert); } else { p = tp->lb + tp->cno + owrite; if (O_ISSET(sp, O_AUTOINDENT)) for (; insert > 0 && isblank(*p); ++p, --insert); owrite = 0; } /* * !!! * Create a new line and insert the new TEXT into the queue. * DON'T insert until the old line has been updated, or the * inserted line count in line.c:db_get() will be wrong. */ if ((ntp = text_init(sp, p, insert + owrite, insert + owrite + 32)) == NULL) goto err; CIRCLEQ_INSERT_TAIL(&sp->tiq, ntp, q); /* Set up bookkeeping for the new line. */ ntp->insert = insert; ntp->owrite = owrite; ntp->lno = tp->lno + 1; /* * Reset the autoindent line value. 0^D keeps the autoindent * line from changing, ^D changes the level, even if there were * no characters in the old line. Note, if using the current * tp structure, use the cursor as the length, the autoindent * characters may have been erased. */ if (LF_ISSET(TXT_AUTOINDENT)) { if (carat == C_NOCHANGE) { if (v_txt_auto(sp, OOBLNO, &ait, ait.ai, ntp)) goto err; FREE_SPACE(sp, ait.lb, ait.lb_len); } else if (v_txt_auto(sp, OOBLNO, tp, tp->cno, ntp)) goto err; carat = C_NOTSET; } /* Reset the cursor. */ ntp->cno = ntp->ai; /* * If we're here because wrapmargin was set and we've broken a * line, there may be additional information (i.e. the start of * a line) in the wmt structure. */ if (wm_set) { if (wmt.offset != 0 || wmt.owrite != 0 || wmt.insert != 0) { #define WMTSPACE wmt.offset + wmt.owrite + wmt.insert BINC_GOTO(sp, ntp->lb, ntp->lb_len, ntp->len + WMTSPACE + 32); memmove(ntp->lb + ntp->cno, wmt.lb, WMTSPACE); ntp->len += WMTSPACE; ntp->cno += wmt.offset; ntp->owrite = wmt.owrite; ntp->insert = wmt.insert; } wm_set = 0; } /* New lines are TXT_APPENDEOL. */ if (ntp->owrite == 0 && ntp->insert == 0) { BINC_GOTO(sp, ntp->lb, ntp->lb_len, ntp->len + 1); LF_SET(TXT_APPENDEOL); ntp->lb[ntp->cno] = CH_CURSOR; ++ntp->insert; ++ntp->len; } /* Swap old and new TEXT's, and update the new line. */ tp = ntp; if (vs_change(sp, tp->lno, LINE_INSERT)) goto err; goto resolve; case K_ESCAPE: /* Escape. */ if (!LF_ISSET(TXT_ESCAPE)) goto ins_ch; /* If we have a count, start replaying the input. */ if (rcount > 1) { --rcount; rcol = 0; abb = AB_NOTSET; LF_CLR(TXT_RECORD); LF_SET(TXT_REPLAY); /* * Some commands (e.g. 'o') need a for each * repetition. */ if (LF_ISSET(TXT_ADDNEWLINE)) goto k_cr; /* * The R command turns into the 'a' command after the * first repetition. */ if (LF_ISSET(TXT_REPLACE)) { tp->insert = tp->owrite; tp->owrite = 0; LF_CLR(TXT_REPLACE); } goto replay; } /* Set term condition: if empty. */ if (tp->cno <= tp->offset) tp->term = TERM_ESC; /* * Set term condition: if searching incrementally and the user * entered a pattern, return a completed search, regardless if * the entire pattern was found. */ if (FL_ISSET(is_flags, IS_RUNNING) && tp->cno >= tp->offset + 1) tp->term = TERM_SEARCH; k_escape: LINE_RESOLVE; /* * Clean up for the 'R' command, restoring overwrite * characters, and making them into insert characters. */ if (LF_ISSET(TXT_REPLACE)) txt_Rresolve(sp, &sp->tiq, tp, len); /* * If there are any overwrite characters, copy down * any insert characters, and decrement the length. */ if (tp->owrite) { if (tp->insert) memmove(tp->lb + tp->cno, tp->lb + tp->cno + tp->owrite, tp->insert); tp->len -= tp->owrite; } /* * Optionally resolve the lines into the file. If not * resolving the lines into the file, end the line with * a nul. If the line is empty, then set the length to * 0, the termination condition has already been set. * * XXX * This is wrong, should pass back a length. */ if (LF_ISSET(TXT_RESOLVE)) { if (txt_resolve(sp, &sp->tiq, flags)) goto err; } else { BINC_GOTO(sp, tp->lb, tp->lb_len, tp->len + 1); tp->lb[tp->len] = '\0'; } /* * Set the return cursor position to rest on the last * inserted character. */ if (tp->cno != 0) --tp->cno; /* Update the last line. */ if (vs_change(sp, tp->lno, LINE_RESET)) return (1); goto done; case K_CARAT: /* Delete autoindent chars. */ if (tp->cno <= tp->ai && LF_ISSET(TXT_AUTOINDENT)) carat = C_CARATSET; goto ins_ch; case K_ZERO: /* Delete autoindent chars. */ if (tp->cno <= tp->ai && LF_ISSET(TXT_AUTOINDENT)) carat = C_ZEROSET; goto ins_ch; case K_CNTRLD: /* Delete autoindent char. */ /* * If in the first column or no characters to erase, ignore * the ^D (this matches historic practice). If not doing * autoindent or already inserted non-ai characters, it's a * literal. The latter test is done in the switch, as the * CARAT forms are N + 1, not N. */ if (!LF_ISSET(TXT_AUTOINDENT)) goto ins_ch; if (tp->cno == 0) goto resolve; switch (carat) { case C_CARATSET: /* ^^D */ if (tp->ai == 0 || tp->cno > tp->ai + tp->offset + 1) goto ins_ch; /* Save the ai string for later. */ ait.lb = NULL; ait.lb_len = 0; BINC_GOTO(sp, ait.lb, ait.lb_len, tp->ai); memmove(ait.lb, tp->lb, tp->ai); ait.ai = ait.len = tp->ai; carat = C_NOCHANGE; goto leftmargin; case C_ZEROSET: /* 0^D */ if (tp->ai == 0 || tp->cno > tp->ai + tp->offset + 1) goto ins_ch; carat = C_NOTSET; leftmargin: tp->lb[tp->cno - 1] = ' '; tp->owrite += tp->cno - tp->offset; tp->ai = 0; tp->cno = tp->offset; break; case C_NOTSET: /* ^D */ if (tp->ai == 0 || tp->cno > tp->ai + tp->offset) goto ins_ch; (void)txt_dent(sp, tp, 0); break; default: abort(); } break; case K_VERASE: /* Erase the last character. */ /* If can erase over the prompt, return. */ if (tp->cno <= tp->offset && LF_ISSET(TXT_BS)) { tp->term = TERM_BS; goto done; } /* * If at the beginning of the line, try and drop back to a * previously inserted line. */ if (tp->cno == 0) { if ((ntp = txt_backup(sp, &sp->tiq, tp, &flags)) == NULL) goto err; tp = ntp; break; } /* If nothing to erase, bell the user. */ if (tp->cno <= tp->offset) { if (!LF_ISSET(TXT_REPLAY)) txt_nomorech(sp); break; } /* Drop back one character. */ --tp->cno; /* * Historically, vi didn't replace the erased characters with * s, presumably because it's easier to fix a minor * typing mistake and continue on if the previous letters are * already there. This is a problem for incremental searching, * because the user can no longer tell where they are in the * colon command line because the cursor is at the last search * point in the screen. So, if incrementally searching, erase * the erased characters from the screen. */ if (FL_ISSET(is_flags, IS_RUNNING)) tp->lb[tp->cno] = ' '; /* * Increment overwrite, decrement ai if deleted. * * !!! * Historic vi did not permit users to use erase characters * to delete autoindent characters. We do. Eat hot death, * POSIX. */ ++tp->owrite; if (tp->cno < tp->ai) --tp->ai; /* Reset if we deleted an incremental search character. */ if (FL_ISSET(is_flags, IS_RUNNING)) FL_SET(is_flags, IS_RESTART); break; case K_VWERASE: /* Skip back one word. */ /* * If at the beginning of the line, try and drop back to a * previously inserted line. */ if (tp->cno == 0) { if ((ntp = txt_backup(sp, &sp->tiq, tp, &flags)) == NULL) goto err; tp = ntp; } /* * If at offset, nothing to erase so bell the user. */ if (tp->cno <= tp->offset) { if (!LF_ISSET(TXT_REPLAY)) txt_nomorech(sp); break; } /* * The first werase goes back to any autoindent column and the * second werase goes back to the offset. * * !!! * Historic vi did not permit users to use erase characters to * delete autoindent characters. */ if (tp->ai && tp->cno > tp->ai) max = tp->ai; else { tp->ai = 0; max = tp->offset; } /* Skip over trailing space characters. */ while (tp->cno > max && isblank(tp->lb[tp->cno - 1])) { --tp->cno; ++tp->owrite; } if (tp->cno == max) break; /* * There are three types of word erase found on UNIX systems. * They can be identified by how the string /a/b/c is treated * -- as 1, 3, or 6 words. Historic vi had two classes of * characters, and strings were delimited by them and * 's, so, 6 words. The historic tty interface used * 's to delimit strings, so, 1 word. The algorithm * offered in the 4.4BSD tty interface (as stty altwerase) * treats it as 3 words -- there are two classes of * characters, and strings are delimited by them and * 's. The difference is that the type of the first * erased character erased is ignored, which is exactly right * when erasing pathname components. The edit options * TXT_ALTWERASE and TXT_TTYWERASE specify the 4.4BSD tty * interface and the historic tty driver behavior, * respectively, and the default is the same as the historic * vi behavior. * * Overwrite erased characters if doing incremental search; * see comment above. */ if (LF_ISSET(TXT_TTYWERASE)) while (tp->cno > max) { --tp->cno; ++tp->owrite; if (FL_ISSET(is_flags, IS_RUNNING)) tp->lb[tp->cno] = ' '; if (isblank(tp->lb[tp->cno - 1])) break; } else { if (LF_ISSET(TXT_ALTWERASE)) { --tp->cno; ++tp->owrite; if (FL_ISSET(is_flags, IS_RUNNING)) tp->lb[tp->cno] = ' '; if (isblank(tp->lb[tp->cno - 1])) break; } if (tp->cno > max) tmp = inword(tp->lb[tp->cno - 1]); while (tp->cno > max) { --tp->cno; ++tp->owrite; if (FL_ISSET(is_flags, IS_RUNNING)) tp->lb[tp->cno] = ' '; if (tmp != inword(tp->lb[tp->cno - 1]) || isblank(tp->lb[tp->cno - 1])) break; } } /* Reset if we deleted an incremental search character. */ if (FL_ISSET(is_flags, IS_RUNNING)) FL_SET(is_flags, IS_RESTART); break; case K_VKILL: /* Restart this line. */ /* * !!! * If at the beginning of the line, try and drop back to a * previously inserted line. Historic vi did not permit * users to go back to previous lines. */ if (tp->cno == 0) { if ((ntp = txt_backup(sp, &sp->tiq, tp, &flags)) == NULL) goto err; tp = ntp; } /* If at offset, nothing to erase so bell the user. */ if (tp->cno <= tp->offset) { if (!LF_ISSET(TXT_REPLAY)) txt_nomorech(sp); break; } /* * First kill goes back to any autoindent and second kill goes * back to the offset. * * !!! * Historic vi did not permit users to use erase characters to * delete autoindent characters. */ if (tp->ai && tp->cno > tp->ai) max = tp->ai; else { tp->ai = 0; max = tp->offset; } tp->owrite += tp->cno - max; /* * Overwrite erased characters if doing incremental search; * see comment above. */ if (FL_ISSET(is_flags, IS_RUNNING)) do { tp->lb[--tp->cno] = ' '; } while (tp->cno > max); else tp->cno = max; /* Reset if we deleted an incremental search character. */ if (FL_ISSET(is_flags, IS_RUNNING)) FL_SET(is_flags, IS_RESTART); break; case K_CNTRLT: /* Add autoindent characters. */ if (!LF_ISSET(TXT_CNTRLT)) goto ins_ch; if (txt_dent(sp, tp, 1)) goto err; goto ebuf_chk; case K_RIGHTBRACE: case K_RIGHTPAREN: if (LF_ISSET(TXT_SHOWMATCH)) showmatch = 1; goto ins_ch; case K_BACKSLASH: /* Quote next erase/kill. */ /* * !!! * Historic vi tried to make abbreviations after a backslash * escape work. If you did ":ab x y", and inserted "x\^H", * (assuming the erase character was ^H) you got "x^H", and * no abbreviation was done. If you inserted "x\z", however, * it tried to back up and do the abbreviation, i.e. replace * 'x' with 'y'. The problem was it got it wrong, and you * ended up with "zy\". * * This is really hard to do (you have to remember the * word/non-word state, for example), and doesn't make any * sense to me. Both backslash and the characters it * (usually) escapes will individually trigger the * abbreviation, so I don't see why the combination of them * wouldn't. I don't expect to get caught on this one, * particularly since it never worked right, but I've been * wrong before. * * Do the tests for abbreviations, so ":ab xa XA", * "ixa\" performs the abbreviation. */ quote = Q_BNEXT; goto insq_ch; case K_VLNEXT: /* Quote next character. */ evp->e_c = '^'; quote = Q_VNEXT; /* * Turn on the quote flag so that the underlying routines * quote the next character where it's possible. Turn off * the input mapbiting flag so that we don't remap the next * character. */ FL_SET(ec_flags, EC_QUOTED); FL_CLR(ec_flags, EC_MAPINPUT); /* * !!! * Skip the tests for abbreviations, so ":ab xa XA", * "ixa^V" doesn't perform the abbreviation. */ goto insl_ch; case K_HEXCHAR: hexcnt = 1; goto insq_ch; default: /* Insert the character. */ ins_ch: /* * Historically, vi eliminated nul's out of hand. If the * beautify option was set, it also deleted any unknown * ASCII value less than space (040) and the del character * (0177), except for tabs. Unknown is a key word here. * Most vi documentation claims that it deleted everything * but , and , as that's what the original * 4BSD documentation said. This is obviously wrong, * however, as would be included in that list. What * we do is eliminate any unquoted, iscntrl() character that * wasn't a replay and wasn't handled specially, except * or . */ if (LF_ISSET(TXT_BEAUTIFY) && iscntrl(evp->e_c) && evp->e_value != K_FORMFEED && evp->e_value != K_TAB) { msgq(sp, M_BERR, "192|Illegal character; quote to enter"); if (LF_ISSET(TXT_REPLAY)) goto done; break; } insq_ch: /* * If entering a non-word character after a word, check for * abbreviations. If there was one, discard replay characters. * If entering a blank character, check for unmap commands, * as well. */ if (!inword(evp->e_c)) { if (abb == AB_INWORD && !LF_ISSET(TXT_REPLAY) && F_ISSET(gp, G_ABBREV)) { if (txt_abbrev(sp, tp, &evp->e_c, LF_ISSET(TXT_INFOLINE), &tmp, &ab_turnoff)) goto err; if (tmp) { if (LF_ISSET(TXT_RECORD)) rcol -= tmp + 1; goto resolve; } } if (isblank(evp->e_c) && UNMAP_TST) txt_unmap(sp, tp, &ec_flags); } if (abb != AB_NOTSET) abb = inword(evp->e_c) ? AB_INWORD : AB_NOTWORD; insl_ch: if (txt_insch(sp, tp, &evp->e_c, flags)) goto err; /* * If we're using K_VLNEXT to quote the next character, then * we want the cursor to position itself on the ^ placeholder * we're displaying, to match historic practice. */ if (quote == Q_VNEXT) { --tp->cno; ++tp->owrite; } /* * !!! * Translate "[isxdigit()]*" to a character with * a hex value: this test delimits the value by the max * number of hex bytes. Offset by one, we use 0 to mean * that we've found . */ if (hexcnt != 0 && hexcnt++ == sizeof(CHAR_T) * 2 + 1) { hexcnt = 0; if (txt_hex(sp, tp)) goto err; } /* * Check to see if we've crossed the margin. * * !!! * In the historic vi, the wrapmargin value was figured out * using the display widths of the characters, i.e. * characters were counted as two characters if the list edit * option is set, but as the tabstop edit option number of * characters otherwise. That's what the vs_column() function * gives us, so we use it. */ if (margin != 0) { if (vs_column(sp, &tcol)) goto err; if (tcol >= margin) { if (txt_margin(sp, tp, &wmt, &tmp, flags)) goto err; if (tmp) { if (isblank(evp->e_c)) wm_skip = 1; wm_set = 1; goto k_cr; } } } /* * If we've reached the end of the buffer, then we need to * switch into insert mode. This happens when there's a * change to a mark and the user puts in more characters than * the length of the motion. */ ebuf_chk: if (tp->cno >= tp->len) { BINC_GOTO(sp, tp->lb, tp->lb_len, tp->len + 1); LF_SET(TXT_APPENDEOL); tp->lb[tp->cno] = CH_CURSOR; ++tp->insert; ++tp->len; } /* Step the quote state forward. */ if (quote != Q_NOTSET) { if (quote == Q_BNEXT) quote = Q_BTHIS; if (quote == Q_VNEXT) quote = Q_VTHIS; } break; } #ifdef DEBUG if (tp->cno + tp->insert + tp->owrite != tp->len) { msgq(sp, M_ERR, "len %u != cno: %u ai: %u insert %u overwrite %u", tp->len, tp->cno, tp->ai, tp->insert, tp->owrite); if (LF_ISSET(TXT_REPLAY)) goto done; tp->len = tp->cno + tp->insert + tp->owrite; } #endif resolve:/* * 1: If we don't need to know where the cursor really is and we're * replaying text, keep going. */ if (margin == 0 && LF_ISSET(TXT_REPLAY)) goto replay; /* * 2: Reset the line. Don't bother unless we're about to wait on * a character or we need to know where the cursor really is. * We have to do this before showing matching characters so the * user can see what they're matching. */ if ((margin != 0 || !KEYS_WAITING(sp)) && vs_change(sp, tp->lno, LINE_RESET)) return (1); /* * 3: If there aren't keys waiting, display the matching character. * We have to do this before resolving any messages, otherwise * the error message from a missing match won't appear correctly. */ if (showmatch) { if (!KEYS_WAITING(sp) && txt_showmatch(sp, tp)) return (1); showmatch = 0; } /* * 4: If there have been messages and we're not editing on the colon * command line or doing file name completion, resolve them. */ if ((vip->totalcount != 0 || F_ISSET(gp, G_BELLSCHED)) && !F_ISSET(sp, SC_TINPUT_INFO) && !filec_redraw && vs_resolve(sp, NULL, 0)) return (1); /* * 5: Refresh the screen if we're about to wait on a character or we * need to know where the cursor really is. */ if (margin != 0 || !KEYS_WAITING(sp)) { UPDATE_POSITION(sp, tp); if (vs_refresh(sp, margin != 0)) return (1); } /* 6: Proceed with the incremental search. */ if (FL_ISSET(is_flags, IS_RUNNING) && txt_isrch(sp, vp, tp, &is_flags)) return (1); /* 7: Next character... */ if (LF_ISSET(TXT_REPLAY)) goto replay; goto next; done: /* Leave input mode. */ F_CLR(sp, SC_TINPUT); /* If recording for playback, save it. */ if (LF_ISSET(TXT_RECORD)) vip->rep_cnt = rcol; /* * If not working on the colon command line, set the final cursor * position. */ if (!F_ISSET(sp, SC_TINPUT_INFO)) { vp->m_final.lno = tp->lno; vp->m_final.cno = tp->cno; } return (0); err: alloc_err: txt_err(sp, &sp->tiq); return (1); } /* * txt_abbrev -- * Handle abbreviations. */ static int txt_abbrev(sp, tp, pushcp, isinfoline, didsubp, turnoffp) SCR *sp; TEXT *tp; CHAR_T *pushcp; int isinfoline, *didsubp, *turnoffp; { VI_PRIVATE *vip; CHAR_T ch, *p; SEQ *qp; size_t len, off; /* Check to make sure we're not at the start of an append. */ *didsubp = 0; if (tp->cno == tp->offset) return (0); vip = VIP(sp); /* * Find the start of the "word". * * !!! * We match historic practice, which, as far as I can tell, had an * off-by-one error. The way this worked was that when the inserted * text switched from a "word" character to a non-word character, * vi would check for possible abbreviations. It would then take the * type (i.e. word/non-word) of the character entered TWO characters * ago, and move backward in the text until reaching a character that * was not that type, or the beginning of the insert, the line, or * the file. For example, in the string "abc", when the * character triggered the abbreviation check, the type of the 'b' * character was used for moving through the string. Maybe there's a * reason for not using the first (i.e. 'c') character, but I can't * think of one. * * Terminate at the beginning of the insert or the character after the * offset character -- both can be tested for using tp->offset. */ off = tp->cno - 1; /* Previous character. */ p = tp->lb + off; len = 1; /* One character test. */ if (off == tp->offset || isblank(p[-1])) goto search; if (inword(p[-1])) /* Move backward to change. */ for (;;) { --off; --p; ++len; if (off == tp->offset || !inword(p[-1])) break; } else for (;;) { --off; --p; ++len; if (off == tp->offset || inword(p[-1]) || isblank(p[-1])) break; } /* * !!! * Historic vi exploded abbreviations on the command line. This has * obvious problems in that unabbreviating the string can be extremely * tricky, particularly if the string has, say, an embedded escape * character. Personally, I think it's a stunningly bad idea. Other * examples of problems this caused in historic vi are: * :ab foo bar * :ab foo baz * results in "bar" being abbreviated to "baz", which wasn't what the * user had in mind at all. Also, the commands: * :ab foo bar * :unab foo * resulted in an error message that "bar" wasn't mapped. Finally, * since the string was already exploded by the time the unabbreviate * command got it, all it knew was that an abbreviation had occurred. * Cleverly, it checked the replacement string for its unabbreviation * match, which meant that the commands: * :ab foo1 bar * :ab foo2 bar * :unab foo2 * unabbreviate "foo1", and the commands: * :ab foo bar * :ab bar baz * unabbreviate "foo"! * * Anyway, people neglected to first ask my opinion before they wrote * macros that depend on this stuff, so, we make this work as follows. * When checking for an abbreviation on the command line, if we get a * string which is terminated and which starts at the beginning * of the line, we check to see it is the abbreviate or unabbreviate * commands. If it is, turn abbreviations off and return as if no * abbreviation was found. Note also, minor trickiness, so that if * the user erases the line and starts another command, we turn the * abbreviations back on. * * This makes the layering look like a Nachos Supreme. */ search: if (isinfoline) if (off == tp->ai || off == tp->offset) if (ex_is_abbrev(p, len)) { *turnoffp = 1; return (0); } else *turnoffp = 0; else if (*turnoffp) return (0); /* Check for any abbreviations. */ if ((qp = seq_find(sp, NULL, NULL, p, len, SEQ_ABBREV, NULL)) == NULL) return (0); /* * Push the abbreviation onto the tty stack. Historically, characters * resulting from an abbreviation expansion were themselves subject to * map expansions, O_SHOWMATCH matching etc. This means the expanded * characters will be re-tested for abbreviations. It's difficult to * know what historic practice in this case was, since abbreviations * were applied to :colon command lines, so entering abbreviations that * looped was tricky, although possible. In addition, obvious loops * didn't work as expected. (The command ':ab a b|ab b c|ab c a' will * silently only implement and/or display the last abbreviation.) * * This implementation doesn't recover well from such abbreviations. * The main input loop counts abbreviated characters, and, when it * reaches a limit, discards any abbreviated characters on the queue. * It's difficult to back up to the original position, as the replay * queue would have to be adjusted, and the line state when an initial * abbreviated character was received would have to be saved. */ ch = *pushcp; if (v_event_push(sp, NULL, &ch, 1, CH_ABBREVIATED)) return (1); if (v_event_push(sp, NULL, qp->output, qp->olen, CH_ABBREVIATED)) return (1); /* * If the size of the abbreviation is larger than or equal to the size * of the original text, move to the start of the replaced characters, * and add their length to the overwrite count. * * If the abbreviation is smaller than the original text, we have to * delete the additional overwrite characters and copy down any insert * characters. */ tp->cno -= len; if (qp->olen >= len) tp->owrite += len; else { if (tp->insert) memmove(tp->lb + tp->cno + qp->olen, tp->lb + tp->cno + tp->owrite + len, tp->insert); tp->owrite += qp->olen; tp->len -= len - qp->olen; } /* * We return the length of the abbreviated characters. This is so * the calling routine can replace the replay characters with the * abbreviation. This means that subsequent '.' commands will produce * the same text, regardless of intervening :[un]abbreviate commands. * This is historic practice. */ *didsubp = len; return (0); } /* * txt_unmap -- * Handle the unmap command. */ static void txt_unmap(sp, tp, ec_flagsp) SCR *sp; TEXT *tp; u_int32_t *ec_flagsp; { size_t len, off; char *p; /* Find the beginning of this "word". */ for (off = tp->cno - 1, p = tp->lb + off, len = 0;; --p, --off) { if (isblank(*p)) { ++p; break; } ++len; if (off == tp->ai || off == tp->offset) break; } /* * !!! * Historic vi exploded input mappings on the command line. See the * txt_abbrev() routine for an explanation of the problems inherent * in this. * * We make this work as follows. If we get a string which is * terminated and which starts at the beginning of the line, we check * to see it is the unmap command. If it is, we return that the input * mapping should be turned off. Note also, minor trickiness, so that * if the user erases the line and starts another command, we go ahead * an turn mapping back on. */ if ((off == tp->ai || off == tp->offset) && ex_is_unmap(p, len)) FL_CLR(*ec_flagsp, EC_MAPINPUT); else FL_SET(*ec_flagsp, EC_MAPINPUT); } /* * txt_ai_resolve -- * When a line is resolved by , review autoindent characters. */ static void txt_ai_resolve(sp, tp, changedp) SCR *sp; TEXT *tp; int *changedp; { u_long ts; int del; size_t cno, len, new, old, scno, spaces, tab_after_sp, tabs; char *p; *changedp = 0; /* * If the line is empty, has an offset, or no autoindent * characters, we're done. */ if (!tp->len || tp->offset || !tp->ai) return; /* * If the length is less than or equal to the autoindent * characters, delete them. */ if (tp->len <= tp->ai) { tp->ai = tp->cno = tp->len = 0; return; } /* * The autoindent characters plus any leading characters * in the line are resolved into the minimum number of characters. * Historic practice. */ ts = O_VAL(sp, O_TABSTOP); /* Figure out the last screen column. */ for (p = tp->lb, scno = 0, len = tp->len, spaces = tab_after_sp = 0; len-- && isblank(*p); ++p) if (*p == '\t') { if (spaces) tab_after_sp = 1; scno += COL_OFF(scno, ts); } else { ++spaces; ++scno; } /* * If there are no spaces, or no tabs after spaces and less than * ts spaces, it's already minimal. */ if (!spaces || !tab_after_sp && spaces < ts) return; /* Count up spaces/tabs needed to get to the target. */ for (cno = 0, tabs = 0; cno + COL_OFF(cno, ts) <= scno; ++tabs) cno += COL_OFF(cno, ts); spaces = scno - cno; /* * Figure out how many characters we're dropping -- if we're not * dropping any, it's already minimal, we're done. */ old = p - tp->lb; new = spaces + tabs; if (old == new) return; /* Shift the rest of the characters down, adjust the counts. */ del = old - new; memmove(p - del, p, tp->len - old); tp->len -= del; tp->cno -= del; /* Fill in space/tab characters. */ for (p = tp->lb; tabs--;) *p++ = '\t'; while (spaces--) *p++ = ' '; *changedp = 1; } /* * v_txt_auto -- * Handle autoindent. If aitp isn't NULL, use it, otherwise, * retrieve the line. * * PUBLIC: int v_txt_auto __P((SCR *, recno_t, TEXT *, size_t, TEXT *)); */ int v_txt_auto(sp, lno, aitp, len, tp) SCR *sp; recno_t lno; TEXT *aitp, *tp; size_t len; { size_t nlen; char *p, *t; if (aitp == NULL) { /* * If the ex append command is executed with an address of 0, * it's possible to get here with a line number of 0. Return * an indent of 0. */ if (lno == 0) { tp->ai = 0; return (0); } if (db_get(sp, lno, DBG_FATAL, &t, &len)) return (1); } else t = aitp->lb; /* Count whitespace characters. */ for (p = t; len > 0; ++p, --len) if (!isblank(*p)) break; /* Set count, check for no indentation. */ if ((nlen = (p - t)) == 0) return (0); /* Make sure the buffer's big enough. */ BINC_RET(sp, tp->lb, tp->lb_len, tp->len + nlen); /* Copy the buffer's current contents up. */ if (tp->len != 0) memmove(tp->lb + nlen, tp->lb, tp->len); tp->len += nlen; /* Copy the indentation into the new buffer. */ memmove(tp->lb, t, nlen); /* Set the autoindent count. */ tp->ai = nlen; return (0); } /* * txt_backup -- * Back up to the previously edited line. */ static TEXT * txt_backup(sp, tiqh, tp, flagsp) SCR *sp; TEXTH *tiqh; TEXT *tp; u_int32_t *flagsp; { VI_PRIVATE *vip; TEXT *ntp; /* Get a handle on the previous TEXT structure. */ if ((ntp = tp->q.cqe_prev) == (void *)tiqh) { if (!FL_ISSET(*flagsp, TXT_REPLAY)) msgq(sp, M_BERR, "193|Already at the beginning of the insert"); return (tp); } /* Bookkeeping. */ ntp->len = ntp->sv_len; /* Handle appending to the line. */ vip = VIP(sp); if (ntp->owrite == 0 && ntp->insert == 0) { ntp->lb[ntp->len] = CH_CURSOR; ++ntp->insert; ++ntp->len; FL_SET(*flagsp, TXT_APPENDEOL); } else FL_CLR(*flagsp, TXT_APPENDEOL); /* Release the current TEXT. */ CIRCLEQ_REMOVE(tiqh, tp, q); text_free(tp); /* Update the old line on the screen. */ if (vs_change(sp, ntp->lno + 1, LINE_DELETE)) return (NULL); /* Return the new/current TEXT. */ return (ntp); } /* * Text indentation is truly strange. ^T and ^D do movements to the next or * previous shiftwidth value, i.e. for a 1-based numbering, with shiftwidth=3, * ^T moves a cursor on the 7th, 8th or 9th column to the 10th column, and ^D * moves it back. * * !!! * The ^T and ^D characters in historical vi had special meaning only when they * were the first characters entered after entering text input mode. As normal * erase characters couldn't erase autoindent characters (^T in this case), it * meant that inserting text into previously existing text was strange -- ^T * only worked if it was the first keystroke(s), and then could only be erased * using ^D. This implementation treats ^T specially anywhere it occurs in the * input, and permits the standard erase characters to erase the characters it * inserts. * * !!! * A fun test is to try: * :se sw=4 ai list * i^Tx^Tx^Tx^Dx^Dx^Dx * Historic vi loses some of the '$' marks on the line ends, but otherwise gets * it right. * * XXX * Technically, txt_dent should be part of the screen interface, as it requires * knowledge of character sizes, including s, on the screen. It's here * because it's a complicated little beast, and I didn't want to shove it down * into the screen. It's probable that KEY_LEN will call into the screen once * there are screens with different character representations. * * txt_dent -- * Handle ^T indents, ^D outdents. * * If anything changes here, check the ex version to see if it needs similar * changes. */ static int txt_dent(sp, tp, isindent) SCR *sp; TEXT *tp; int isindent; { CHAR_T ch; u_long sw, ts; size_t cno, current, spaces, target, tabs, off; int ai_reset; ts = O_VAL(sp, O_TABSTOP); sw = O_VAL(sp, O_SHIFTWIDTH); /* * Since we don't know what precedes the character(s) being inserted * (or deleted), the preceding whitespace characters must be resolved. * An example is a , which doesn't need a full shiftwidth number * of columns because it's preceded by s. This is easy to get * if the user sets shiftwidth to a value less than tabstop (or worse, * something for which tabstop isn't a multiple) and then uses ^T to * indent, and ^D to outdent. * * Figure out the current and target screen columns. In the historic * vi, the autoindent column was NOT determined using display widths * of characters as was the wrapmargin column. For that reason, we * can't use the vs_column() function, but have to calculate it here. * This is slow, but it's normally only on the first few characters of * a line. */ for (current = cno = 0; cno < tp->cno; ++cno) current += tp->lb[cno] == '\t' ? COL_OFF(current, ts) : KEY_LEN(sp, tp->lb[cno]); target = current; if (isindent) target += COL_OFF(target, sw); else target -= --target % sw; /* * The AI characters will be turned into overwrite characters if the * cursor immediately follows them. We test both the cursor position * and the indent flag because there's no single test. (^T can only * be detected by the cursor position, and while we know that the test * is always true for ^D, the cursor can be in more than one place, as * "0^D" and "^D" are different.) */ ai_reset = !isindent || tp->cno == tp->ai + tp->offset; /* * Back up over any previous characters, changing them into * overwrite characters (including any ai characters). Then figure * out the current screen column. */ for (; tp->cno > tp->offset && (tp->lb[tp->cno - 1] == ' ' || tp->lb[tp->cno - 1] == '\t'); --tp->cno, ++tp->owrite); for (current = cno = 0; cno < tp->cno; ++cno) current += tp->lb[cno] == '\t' ? COL_OFF(current, ts) : KEY_LEN(sp, tp->lb[cno]); /* * If we didn't move up to or past the target, it's because there * weren't enough characters to delete, e.g. the first character * of the line was a tp->offset character, and the user entered * ^D to move to the beginning of a line. An example of this is: * * :set ai sw=4iai^T^D * * Otherwise, count up the total spaces/tabs needed to get from the * beginning of the line (or the last non- character) to the * target. */ if (current >= target) spaces = tabs = 0; else { for (cno = current, tabs = 0; cno + COL_OFF(cno, ts) <= target; ++tabs) cno += COL_OFF(cno, ts); spaces = target - cno; } /* If we overwrote ai characters, reset the ai count. */ if (ai_reset) tp->ai = tabs + spaces; /* * Call txt_insch() to insert each character, so that we get the * correct effect when we add a to replace N . */ for (ch = '\t'; tabs > 0; --tabs) (void)txt_insch(sp, tp, &ch, 0); for (ch = ' '; spaces > 0; --spaces) (void)txt_insch(sp, tp, &ch, 0); return (0); } /* * txt_fc -- * File name completion. */ static int txt_fc(sp, tp, redrawp) SCR *sp; TEXT *tp; int *redrawp; { struct stat sb; ARGS **argv; CHAR_T s_ch; EXCMD cmd; size_t indx, len, nlen, off; int argc, trydir; char *p, *t; trydir = 0; *redrawp = 0; /* * Find the beginning of this "word" -- if we're at the beginning * of the line, it's a special case. */ if (tp->cno == 1) { len = 0; p = tp->lb; } else retry: for (len = 0, off = tp->cno - 1, p = tp->lb + off;; --off, --p) { if (isblank(*p)) { ++p; break; } ++len; if (off == tp->ai || off == tp->offset) break; } /* * Get enough space for a wildcard character. * * XXX * This won't work for "foo\", since the \ will escape the expansion * character. I'm not sure if that's a bug or not... */ off = p - tp->lb; BINC_RET(sp, tp->lb, tp->lb_len, tp->len + 1); p = tp->lb + off; s_ch = p[len]; p[len] = '*'; /* Build an ex command, and call the ex expansion routines. */ ex_cinit(&cmd, 0, 0, OOBLNO, OOBLNO, 0, NULL); if (argv_init(sp, &cmd)) return (1); if (argv_exp2(sp, &cmd, p, len + 1)) { p[len] = s_ch; return (0); } argc = cmd.argc; argv = cmd.argv; p[len] = s_ch; switch (argc) { case 0: /* No matches. */ if (!trydir) (void)sp->gp->scr_bell(sp); return (0); case 1: /* One match. */ /* If something changed, do the exchange. */ nlen = strlen(cmd.argv[0]->bp); if (len != nlen || memcmp(cmd.argv[0]->bp, p, len)) break; /* If haven't done a directory test, do it now. */ if (!trydir && !stat(cmd.argv[0]->bp, &sb) && S_ISDIR(sb.st_mode)) { p += len; goto isdir; } /* If nothing changed, period, ring the bell. */ if (!trydir) (void)sp->gp->scr_bell(sp); return (0); default: /* Multiple matches. */ *redrawp = 1; if (txt_fc_col(sp, argc, argv)) return (1); /* Find the length of the shortest match. */ for (nlen = cmd.argv[0]->len; --argc > 0;) { if (cmd.argv[argc]->len < nlen) nlen = cmd.argv[argc]->len; for (indx = 0; indx < nlen && cmd.argv[argc]->bp[indx] == cmd.argv[0]->bp[indx]; ++indx); nlen = indx; } break; } /* Overwrite the expanded text first. */ for (t = cmd.argv[0]->bp; len > 0 && nlen > 0; --len, --nlen) *p++ = *t++; /* If lost text, make the remaining old text overwrite characters. */ if (len) { tp->cno -= len; tp->owrite += len; } /* Overwrite any overwrite characters next. */ for (; nlen > 0 && tp->owrite > 0; --nlen, --tp->owrite, ++tp->cno) *p++ = *t++; /* Shift remaining text up, and move the cursor to the end. */ if (nlen) { off = p - tp->lb; BINC_RET(sp, tp->lb, tp->lb_len, tp->len + nlen); p = tp->lb + off; tp->cno += nlen; tp->len += nlen; if (tp->insert != 0) (void)memmove(p + nlen, p, tp->insert); while (nlen--) *p++ = *t++; } /* If a single match and it's a directory, retry it. */ if (argc == 1 && !stat(cmd.argv[0]->bp, &sb) && S_ISDIR(sb.st_mode)) { isdir: if (tp->owrite == 0) { off = p - tp->lb; BINC_RET(sp, tp->lb, tp->lb_len, tp->len + 1); p = tp->lb + off; if (tp->insert != 0) (void)memmove(p + 1, p, tp->insert); ++tp->len; } else --tp->owrite; ++tp->cno; *p++ = '/'; trydir = 1; goto retry; } return (0); } /* * txt_fc_col -- * Display file names for file name completion. */ static int txt_fc_col(sp, argc, argv) SCR *sp; int argc; ARGS **argv; { ARGS **av; CHAR_T *p; GS *gp; size_t base, cnt, col, colwidth, numrows, numcols, prefix, row; int ac, nf, reset; gp = sp->gp; /* Trim any directory prefix common to all of the files. */ if ((p = strrchr(argv[0]->bp, '/')) == NULL) prefix = 0; else { prefix = (p - argv[0]->bp) + 1; for (ac = argc - 1, av = argv + 1; ac > 0; --ac, ++av) if (av[0]->len < prefix || memcmp(av[0]->bp, argv[0]->bp, prefix)) { prefix = 0; break; } } /* * Figure out the column width for the longest name. Output is done on * 6 character "tab" boundaries for no particular reason. (Since we * don't output tab characters, we ignore the terminal's tab settings.) * Ignore the user's tab setting because we have no idea how reasonable * it is. */ for (ac = argc, av = argv, colwidth = 0; ac > 0; --ac, ++av) { for (col = 0, p = av[0]->bp + prefix; *p != '\0'; ++p) col += KEY_LEN(sp, *p); if (col > colwidth) colwidth = col; } colwidth += COL_OFF(colwidth, 6); /* * Writing to the bottom line of the screen is always turned off when * SC_TINPUT_INFO is set. Turn it back on, we know what we're doing. */ if (F_ISSET(sp, SC_TINPUT_INFO)) { reset = 1; F_CLR(sp, SC_TINPUT_INFO); } else reset = 0; #define CHK_INTR \ if (F_ISSET(gp, G_INTERRUPTED)) \ goto intr; /* If the largest file name is too large, just print them. */ if (colwidth > sp->cols) { p = msg_print(sp, av[0]->bp + prefix, &nf); for (ac = argc, av = argv; ac > 0; --ac, ++av) { (void)ex_printf(sp, "%s\n", p); if (F_ISSET(gp, G_INTERRUPTED)) break; } if (nf) FREE_SPACE(sp, p, 0); CHK_INTR; } else { /* Figure out the number of columns. */ numcols = (sp->cols - 1) / colwidth; if (argc > numcols) { numrows = argc / numcols; if (argc % numcols) ++numrows; } else numrows = 1; /* Display the files in sorted order. */ for (row = 0; row < numrows; ++row) { for (base = row, col = 0; col < numcols; ++col) { p = msg_print(sp, argv[base]->bp + prefix, &nf); cnt = ex_printf(sp, "%s", p); if (nf) FREE_SPACE(sp, p, 0); CHK_INTR; if ((base += numrows) >= argc) break; (void)ex_printf(sp, "%*s", (int)(colwidth - cnt), ""); CHK_INTR; } (void)ex_puts(sp, "\n"); CHK_INTR; } (void)ex_puts(sp, "\n"); CHK_INTR; } (void)ex_fflush(sp); if (0) { intr: F_CLR(gp, G_INTERRUPTED); } if (reset) F_SET(sp, SC_TINPUT_INFO); return (0); } /* * txt_emark -- * Set the end mark on the line. */ static int txt_emark(sp, tp, cno) SCR *sp; TEXT *tp; size_t cno; { CHAR_T ch, *kp; size_t chlen, nlen, olen; char *p; ch = CH_ENDMARK; /* * The end mark may not be the same size as the current character. * Don't let the line shift. */ nlen = KEY_LEN(sp, ch); if (tp->lb[cno] == '\t') (void)vs_columns(sp, tp->lb, tp->lno, &cno, &olen); else olen = KEY_LEN(sp, tp->lb[cno]); /* * If the line got longer, well, it's weird, but it's easy. If * it's the same length, it's easy. If it got shorter, we have * to fix it up. */ if (olen > nlen) { BINC_RET(sp, tp->lb, tp->lb_len, tp->len + olen); chlen = olen - nlen; if (tp->insert != 0) memmove(tp->lb + cno + 1 + chlen, tp->lb + cno + 1, tp->insert); tp->len += chlen; tp->owrite += chlen; p = tp->lb + cno; if (tp->lb[cno] == '\t') for (cno += chlen; chlen--;) *p++ = ' '; else for (kp = KEY_NAME(sp, tp->lb[cno]), cno += chlen; chlen--;) *p++ = *kp++; } tp->lb[cno] = ch; return (vs_change(sp, tp->lno, LINE_RESET)); } /* * txt_err -- * Handle an error during input processing. */ static void txt_err(sp, tiqh) SCR *sp; TEXTH *tiqh; { recno_t lno; /* * The problem with input processing is that the cursor is at an * indeterminate position since some input may have been lost due * to a malloc error. So, try to go back to the place from which * the cursor started, knowing that it may no longer be available. * * We depend on at least one line number being set in the text * chain. */ for (lno = tiqh->cqh_first->lno; !db_exist(sp, lno) && lno > 0; --lno); sp->lno = lno == 0 ? 1 : lno; sp->cno = 0; /* Redraw the screen, just in case. */ F_SET(sp, SC_SCR_REDRAW); } /* * txt_hex -- * Let the user insert any character value they want. * * !!! * This is an extension. The pattern "^X[0-9a-fA-F]*" is a way * for the user to specify a character value which their keyboard * may not be able to enter. */ static int txt_hex(sp, tp) SCR *sp; TEXT *tp; { CHAR_T savec; size_t len, off; u_long value; char *p, *wp; /* * Null-terminate the string. Since nul isn't a legal hex value, * this should be okay, and lets us use a local routine, which * presumably understands the character set, to convert the value. */ savec = tp->lb[tp->cno]; tp->lb[tp->cno] = 0; /* Find the previous CH_HEX character. */ for (off = tp->cno - 1, p = tp->lb + off, len = 0;; --p, --off, ++len) { if (*p == CH_HEX) { wp = p + 1; break; } /* Not on this line? Shouldn't happen. */ if (off == tp->ai || off == tp->offset) goto nothex; } /* If length of 0, then it wasn't a hex value. */ if (len == 0) goto nothex; /* Get the value. */ errno = 0; value = strtol(wp, NULL, 16); if (errno || value > MAX_CHAR_T) { nothex: tp->lb[tp->cno] = savec; return (0); } /* Restore the original character. */ tp->lb[tp->cno] = savec; /* Adjust the bookkeeping. */ tp->cno -= len; tp->len -= len; tp->lb[tp->cno - 1] = value; /* Copy down any overwrite characters. */ if (tp->owrite) memmove(tp->lb + tp->cno, tp->lb + tp->cno + len, tp->owrite); /* Copy down any insert characters. */ if (tp->insert) memmove(tp->lb + tp->cno + tp->owrite, tp->lb + tp->cno + tp->owrite + len, tp->insert); return (0); } /* * txt_insch -- * * !!! * Historic vi did a special screen optimization for tab characters. As an * example, for the keystrokes "iabcd0C", the tab overwrote the * rest of the string when it was displayed. * * Because early versions of this implementation redisplayed the entire line * on each keystroke, the "bcd" was pushed to the right as it ignored that * the user had "promised" to change the rest of the characters. However, * the historic vi implementation had an even worse bug: given the keystrokes * "iabcd0R", the "bcd" disappears, and magically reappears * on the second key. * * POSIX 1003.2 requires (will require) that this be fixed, specifying that * vi overwrite characters the user has committed to changing, on the basis * of the screen space they require, but that it not overwrite other characters. */ static int txt_insch(sp, tp, chp, flags) SCR *sp; TEXT *tp; CHAR_T *chp; u_int flags; { CHAR_T *kp, savech; size_t chlen, cno, copydown, olen, nlen; char *p; /* * This probably isn't the best place for the Vigor handling. * More particularly, we should ideally ensure that the screen * is up-to-date at this point. However, I have completely ignored * screen updates in Vigor so far, so I suppose I can carry on * this perfectly fine tradition. */ vigor_gotchar(*chp); /* * The 'R' command does one-for-one replacement, because there's * no way to know how many characters the user intends to replace. */ if (LF_ISSET(TXT_REPLACE)) { if (tp->owrite) { --tp->owrite; tp->lb[tp->cno++] = *chp; return (0); } } else if (tp->owrite) { /* Overwrite a character. */ cno = tp->cno; /* * If the old or new characters are tabs, then the length of the * display depends on the character position in the display. We * don't even try to handle this here, just ask the screen. */ if (*chp == '\t') { savech = tp->lb[cno]; tp->lb[cno] = '\t'; (void)vs_columns(sp, tp->lb, tp->lno, &cno, &nlen); tp->lb[cno] = savech; } else nlen = KEY_LEN(sp, *chp); /* * Eat overwrite characters until we run out of them or we've * handled the length of the new character. If we only eat * part of an overwrite character, break it into its component * elements and display the remaining components. */ for (copydown = 0; nlen != 0 && tp->owrite != 0;) { --tp->owrite; if (tp->lb[cno] == '\t') (void)vs_columns(sp, tp->lb, tp->lno, &cno, &olen); else olen = KEY_LEN(sp, tp->lb[cno]); if (olen == nlen) { nlen = 0; break; } if (olen < nlen) { ++copydown; nlen -= olen; } else { BINC_RET(sp, tp->lb, tp->lb_len, tp->len + olen); chlen = olen - nlen; memmove(tp->lb + cno + 1 + chlen, tp->lb + cno + 1, tp->owrite + tp->insert); tp->len += chlen; tp->owrite += chlen; if (tp->lb[cno] == '\t') for (p = tp->lb + cno + 1; chlen--;) *p++ = ' '; else for (kp = KEY_NAME(sp, tp->lb[cno]) + nlen, p = tp->lb + cno + 1; chlen--;) *p++ = *kp++; nlen = 0; break; } } /* * If had to erase several characters, we adjust the total * count, and if there are any characters left, shift them * into position. */ if (copydown != 0 && (tp->len -= copydown) != 0) memmove(tp->lb + cno, tp->lb + cno + copydown, tp->owrite + tp->insert + copydown); /* If we had enough overwrite characters, we're done. */ if (nlen == 0) { tp->lb[tp->cno++] = *chp; return (0); } } /* Check to see if the character fits into the input buffer. */ BINC_RET(sp, tp->lb, tp->lb_len, tp->len + 1); ++tp->len; if (tp->insert) { /* Insert a character. */ if (tp->insert == 1) tp->lb[tp->cno + 1] = tp->lb[tp->cno]; else memmove(tp->lb + tp->cno + 1, tp->lb + tp->cno, tp->owrite + tp->insert); } tp->lb[tp->cno++] = *chp; return (0); } /* * txt_isrch -- * Do an incremental search. */ static int txt_isrch(sp, vp, tp, is_flagsp) SCR *sp; VICMD *vp; TEXT *tp; u_int8_t *is_flagsp; { MARK start; recno_t lno; u_int sf; /* If it's a one-line screen, we don't do incrementals. */ if (IS_ONELINE(sp)) { FL_CLR(*is_flagsp, IS_RUNNING); return (0); } /* * If the user erases back to the beginning of the buffer, there's * nothing to search for. Reset the cursor to the starting point. */ if (tp->cno <= 1) { vp->m_final = vp->m_start; return (0); } /* * If it's an RE quote character, and not quoted, ignore it until * we get another character. */ if (tp->lb[tp->cno - 1] == '\\' && (tp->cno == 2 || tp->lb[tp->cno - 2] != '\\')) return (0); /* * If it's a magic shell character, and not quoted, reset the cursor * to the starting point. */ if (strchr(O_STR(sp, O_SHELLMETA), tp->lb[tp->cno - 1]) != NULL && (tp->cno == 2 || tp->lb[tp->cno - 2] != '\\')) vp->m_final = vp->m_start; /* * If we see the search pattern termination character, then quit doing * an incremental search. There may be more, e.g., ":/foo/;/bar/", * and we can't handle that incrementally. Also, reset the cursor to * the original location, the ex search routines don't know anything * about incremental searches. */ if (tp->lb[0] == tp->lb[tp->cno - 1] && (tp->cno == 2 || tp->lb[tp->cno - 2] != '\\')) { vp->m_final = vp->m_start; FL_CLR(*is_flagsp, IS_RUNNING); return (0); } /* * Remember the input line and discard the special input map, * but don't overwrite the input line on the screen. */ lno = tp->lno; F_SET(VIP(sp), VIP_S_MODELINE); F_CLR(sp, SC_TINPUT | SC_TINPUT_INFO); if (txt_map_end(sp)) return (1); /* * Specify a starting point and search. If we find a match, move to * it and refresh the screen. If we didn't find the match, then we * beep the screen. When searching from the original cursor position, * we have to move the cursor, otherwise, we don't want to move the * cursor in case the text at the current position continues to match. */ if (FL_ISSET(*is_flagsp, IS_RESTART)) { start = vp->m_start; sf = SEARCH_SET; } else { start = vp->m_final; sf = SEARCH_INCR | SEARCH_SET; } if (tp->lb[0] == '/' ? !f_search(sp, &start, &vp->m_final, tp->lb + 1, tp->cno - 1, NULL, sf) : !b_search(sp, &start, &vp->m_final, tp->lb + 1, tp->cno - 1, NULL, sf)) { sp->lno = vp->m_final.lno; sp->cno = vp->m_final.cno; FL_CLR(*is_flagsp, IS_RESTART); if (!KEYS_WAITING(sp) && vs_refresh(sp, 0)) return (1); } else FL_SET(*is_flagsp, IS_RESTART); /* Reinstantiate the special input map. */ if (txt_map_init(sp)) return (1); F_CLR(VIP(sp), VIP_S_MODELINE); F_SET(sp, SC_TINPUT | SC_TINPUT_INFO); /* Reset the line number of the input line. */ tp->lno = TMAP[0].lno; /* * If the colon command-line moved, i.e. the screen scrolled, * refresh the input line. * * XXX * We shouldn't be calling vs_line, here -- we need dirty bits * on entries in the SMAP array. */ if (lno != TMAP[0].lno) { if (vs_line(sp, &TMAP[0], NULL, NULL)) return (1); (void)sp->gp->scr_refresh(sp, 0); } return (0); } /* * txt_resolve -- * Resolve the input text chain into the file. */ static int txt_resolve(sp, tiqh, flags) SCR *sp; TEXTH *tiqh; u_int32_t flags; { VI_PRIVATE *vip; TEXT *tp; recno_t lno; int changed; /* * The first line replaces a current line, and all subsequent lines * are appended into the file. Resolve autoindented characters for * each line before committing it. If the latter causes the line to * change, we have to redisplay it, otherwise the information cached * about the line will be wrong. */ vip = VIP(sp); tp = tiqh->cqh_first; if (LF_ISSET(TXT_AUTOINDENT)) txt_ai_resolve(sp, tp, &changed); else changed = 0; if (db_set(sp, tp->lno, tp->lb, tp->len) || changed && vs_change(sp, tp->lno, LINE_RESET)) return (1); for (lno = tp->lno; (tp = tp->q.cqe_next) != (void *)&sp->tiq; ++lno) { if (LF_ISSET(TXT_AUTOINDENT)) txt_ai_resolve(sp, tp, &changed); else changed = 0; if (db_append(sp, 0, lno, tp->lb, tp->len) || changed && vs_change(sp, tp->lno, LINE_RESET)) return (1); } /* * Clear the input flag, the look-aside buffer is no longer valid. * Has to be done as part of text resolution, or upon return we'll * be looking at incorrect data. */ F_CLR(sp, SC_TINPUT); return (0); } /* * txt_showmatch -- * Show a character match. * * !!! * Historic vi tried to display matches even in the :colon command line. * I think not. */ static int txt_showmatch(sp, tp) SCR *sp; TEXT *tp; { GS *gp; VCS cs; MARK m; int cnt, endc, startc; gp = sp->gp; /* * Do a refresh first, in case we haven't done one in awhile, * so the user can see what we're complaining about. */ UPDATE_POSITION(sp, tp); if (vs_refresh(sp, 1)) return (1); /* * We don't display the match if it's not on the screen. Find * out what the first character on the screen is. */ if (vs_sm_position(sp, &m, 0, P_TOP)) return (1); /* Initialize the getc() interface. */ cs.cs_lno = tp->lno; cs.cs_cno = tp->cno - 1; if (cs_init(sp, &cs)) return (1); startc = (endc = cs.cs_ch) == ')' ? '(' : '{'; /* Search for the match. */ for (cnt = 1;;) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags != 0) { if (cs.cs_flags == CS_EOF || cs.cs_flags == CS_SOF) { msgq(sp, M_BERR, "Unmatched %s", KEY_NAME(sp, endc)); return (0); } continue; } if (cs.cs_ch == endc) ++cnt; else if (cs.cs_ch == startc && --cnt == 0) break; } /* If the match is on the screen, move to it. */ if (cs.cs_lno < m.lno || cs.cs_lno == m.lno && cs.cs_cno < m.cno) return (0); sp->lno = cs.cs_lno; sp->cno = cs.cs_cno; if (vs_refresh(sp, 1)) return (1); /* Wait for timeout or character arrival. */ return (v_event_get(sp, NULL, O_VAL(sp, O_MATCHTIME) * 100, EC_TIMEOUT)); } /* * txt_margin -- * Handle margin wrap. */ static int txt_margin(sp, tp, wmtp, didbreak, flags) SCR *sp; TEXT *tp, *wmtp; int *didbreak; u_int32_t flags; { VI_PRIVATE *vip; size_t len, off; char *p, *wp; /* Find the nearest previous blank. */ for (off = tp->cno - 1, p = tp->lb + off, len = 0;; --off, --p, ++len) { if (isblank(*p)) { wp = p + 1; break; } /* * If reach the start of the line, there's nowhere to break. * * !!! * Historic vi belled each time a character was entered after * crossing the margin until a space was entered which could * be used to break the line. I don't as it tends to wake the * cats. */ if (off == tp->ai || off == tp->offset) { *didbreak = 0; return (0); } } /* * Store saved information about the rest of the line in the * wrapmargin TEXT structure. * * !!! * The offset field holds the length of the current characters * that the user entered, but which are getting split to the new * line -- it's going to be used to set the cursor value when we * move to the new line. */ vip = VIP(sp); wmtp->lb = p + 1; wmtp->offset = len; wmtp->insert = LF_ISSET(TXT_APPENDEOL) ? tp->insert - 1 : tp->insert; wmtp->owrite = tp->owrite; /* Correct current bookkeeping information. */ tp->cno -= len; if (LF_ISSET(TXT_APPENDEOL)) { tp->len -= len + tp->owrite + (tp->insert - 1); tp->insert = 1; } else { tp->len -= len + tp->owrite + tp->insert; tp->insert = 0; } tp->owrite = 0; /* * !!! * Delete any trailing whitespace from the current line. */ for (;; --p, --off) { if (!isblank(*p)) break; --tp->cno; --tp->len; if (off == tp->ai || off == tp->offset) break; } *didbreak = 1; return (0); } /* * txt_Rresolve -- * Resolve the input line for the 'R' command. */ static void txt_Rresolve(sp, tiqh, tp, orig_len) SCR *sp; TEXTH *tiqh; TEXT *tp; const size_t orig_len; { TEXT *ttp; size_t input_len, retain; char *p; /* * Check to make sure that the cursor hasn't moved beyond * the end of the line. */ if (tp->owrite == 0) return; /* * Calculate how many characters the user has entered, * plus the blanks erased by /s. */ for (ttp = tiqh->cqh_first, input_len = 0;;) { input_len += ttp == tp ? tp->cno : ttp->len + ttp->R_erase; if ((ttp = ttp->q.cqe_next) == (void *)&sp->tiq) break; } /* * If the user has entered less characters than the original line * was long, restore any overwriteable characters to the original * characters. These characters are entered as "insert characters", * because they're after the cursor and we don't want to lose them. * (This is okay because the R command has no insert characters.) * We set owrite to 0 so that the insert characters don't get copied * to somewhere else, which means that the line and the length have * to be adjusted here as well. * * We have to retrieve the original line because the original pinned * page has long since been discarded. If it doesn't exist, that's * okay, the user just extended the file. */ if (input_len < orig_len) { retain = MIN(tp->owrite, orig_len - input_len); if (db_get(sp, tiqh->cqh_first->lno, DBG_FATAL | DBG_NOCACHE, &p, NULL)) return; memcpy(tp->lb + tp->cno, p + input_len, retain); tp->len -= tp->owrite - retain; tp->owrite = 0; tp->insert += retain; } } /* * txt_nomorech -- * No more characters message. */ static void txt_nomorech(sp) SCR *sp; { msgq(sp, M_BERR, "194|No more characters to erase"); } vigor-0.016.orig/vi/v_z.c0100644000076400007640000000701607103707240013652 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_z.c 10.10 (Berkeley) 5/16/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_z -- [count]z[count][-.+^] * Move the screen. * * PUBLIC: int v_z __P((SCR *, VICMD *)); */ int v_z(sp, vp) SCR *sp; VICMD *vp; { recno_t lno; u_int value; /* * The first count is the line to use. If the value doesn't * exist, use the last line. */ if (F_ISSET(vp, VC_C1SET)) { lno = vp->count; if (!db_exist(sp, lno) && db_last(sp, &lno)) return (1); } else lno = vp->m_start.lno; /* Set default return cursor line. */ vp->m_final.lno = lno; vp->m_final.cno = vp->m_start.cno; /* * The second count is the displayed window size, i.e. the 'z' command * is another way to get artificially small windows. Note, you can't * grow beyond the size of the window. * * !!! * A window size of 0 was historically allowed, and simply ignored. * This could be much more simply done by modifying the value of the * O_WINDOW option, but that's not how it worked historically. */ if (F_ISSET(vp, VC_C2SET) && vp->count2 != 0) { if (vp->count2 > O_VAL(sp, O_WINDOW)) vp->count2 = O_VAL(sp, O_WINDOW); if (vs_crel(sp, vp->count2)) return (1); } switch (vp->character) { case '-': /* Put the line at the bottom. */ if (vs_sm_fill(sp, lno, P_BOTTOM)) return (1); break; case '.': /* Put the line in the middle. */ if (vs_sm_fill(sp, lno, P_MIDDLE)) return (1); break; case '+': /* * If the user specified a line number, put that line at the * top and move the cursor to it. Otherwise, scroll forward * a screen from the current screen. */ if (F_ISSET(vp, VC_C1SET)) { if (vs_sm_fill(sp, lno, P_TOP)) return (1); if (vs_sm_position(sp, &vp->m_final, 0, P_TOP)) return (1); } else if (vs_sm_scroll(sp, &vp->m_final, sp->t_rows, Z_PLUS)) return (1); break; case '^': /* * If the user specified a line number, put that line at the * bottom, move the cursor to it, and then display the screen * before that one. Otherwise, scroll backward a screen from * the current screen. * * !!! * Note, we match the off-by-one characteristics of historic * vi, here. */ if (F_ISSET(vp, VC_C1SET)) { if (vs_sm_fill(sp, lno, P_BOTTOM)) return (1); if (vs_sm_position(sp, &vp->m_final, 0, P_TOP)) return (1); if (vs_sm_fill(sp, vp->m_final.lno, P_BOTTOM)) return (1); } else if (vs_sm_scroll(sp, &vp->m_final, sp->t_rows, Z_CARAT)) return (1); break; default: /* Put the line at the top for . */ value = KEY_VAL(sp, vp->character); if (value != K_CR && value != K_NL) { v_emsg(sp, vp->kp->usage, VIM_USAGE); return (1); } if (vs_sm_fill(sp, lno, P_TOP)) return (1); break; } return (0); } /* * vs_crel -- * Change the relative size of the current screen. * * PUBLIC: int vs_crel __P((SCR *, long)); */ int vs_crel(sp, count) SCR *sp; long count; { sp->t_minrows = sp->t_rows = count; if (sp->t_rows > sp->rows - 1) sp->t_minrows = sp->t_rows = sp->rows - 1; TMAP = HMAP + (sp->t_rows - 1); F_SET(sp, SC_SCR_REDRAW); return (0); } vigor-0.016.orig/vi/v_ulcase.c0100644000076400007640000000704107103707240014653 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_ulcase.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static int ulcase __P((SCR *, recno_t, CHAR_T *, size_t, size_t, size_t)); /* * v_ulcase -- [count]~ * Toggle upper & lower case letters. * * !!! * Historic vi didn't permit ~ to cross newline boundaries. I can * think of no reason why it shouldn't, which at least lets the user * auto-repeat through a paragraph. * * !!! * In historic vi, the count was ignored. It would have been better * if there had been an associated motion, but it's too late to make * that the default now. * * PUBLIC: int v_ulcase __P((SCR *, VICMD *)); */ int v_ulcase(sp, vp) SCR *sp; VICMD *vp; { recno_t lno; size_t cno, lcnt, len; u_long cnt; char *p; lno = vp->m_start.lno; cno = vp->m_start.cno; for (cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cnt > 0; cno = 0) { /* SOF is an error, EOF is an infinite count sink. */ if (db_get(sp, lno, 0, &p, &len)) { if (lno == 1) { v_emsg(sp, NULL, VIM_EMPTY); return (1); } --lno; break; } /* Empty lines decrement the count by one. */ if (len == 0) { --cnt; vp->m_final.cno = 0; continue; } if (cno + cnt >= len) { lcnt = len - 1; cnt -= len - cno; vp->m_final.cno = len - 1; } else { lcnt = cno + cnt - 1; cnt = 0; vp->m_final.cno = lcnt + 1; } if (ulcase(sp, lno, p, len, cno, lcnt)) return (1); if (cnt > 0) ++lno; } vp->m_final.lno = lno; return (0); } /* * v_mulcase -- [count]~[count]motion * Toggle upper & lower case letters over a range. * * PUBLIC: int v_mulcase __P((SCR *, VICMD *)); */ int v_mulcase(sp, vp) SCR *sp; VICMD *vp; { CHAR_T *p; size_t len; recno_t lno; for (lno = vp->m_start.lno;;) { if (db_get(sp, lno, DBG_FATAL, &p, &len)) return (1); if (len != 0 && ulcase(sp, lno, p, len, lno == vp->m_start.lno ? vp->m_start.cno : 0, !F_ISSET(vp, VM_LMODE) && lno == vp->m_stop.lno ? vp->m_stop.cno : len)) return (1); if (++lno > vp->m_stop.lno) break; } /* * XXX * I didn't create a new motion command when I added motion semantics * for ~. While that's the correct way to do it, that choice would * have required changes all over the vi directory for little gain. * Instead, we pretend it's a yank command. Note, this means that we * follow the cursor motion rules for yank commands, but that seems * reasonable to me. */ return (0); } /* * ulcase -- * Change part of a line's case. */ static int ulcase(sp, lno, lp, len, scno, ecno) SCR *sp; recno_t lno; CHAR_T *lp; size_t len, scno, ecno; { size_t blen; int change, rval; CHAR_T ch, *p, *t; char *bp; GET_SPACE_RET(sp, bp, blen, len); memmove(bp, lp, len); change = rval = 0; for (p = bp + scno, t = bp + ecno + 1; p < t; ++p) { ch = *(u_char *)p; if (islower(ch)) { *p = toupper(ch); change = 1; } else if (isupper(ch)) { *p = tolower(ch); change = 1; } } if (change && db_set(sp, lno, bp, len)) rval = 1; FREE_SPACE(sp, bp, blen); return (rval); } vigor-0.016.orig/vi/v_undo.c0100644000076400007640000001051507103707240014344 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_undo.c 10.5 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_Undo -- U * Undo changes to this line. * * PUBLIC: int v_Undo __P((SCR *, VICMD *)); */ int v_Undo(sp, vp) SCR *sp; VICMD *vp; { /* * Historically, U reset the cursor to the first column in the line * (not the first non-blank). This seems a bit non-intuitive, but, * considering that we may have undone multiple changes, anything * else (including the cursor position stored in the logging records) * is going to appear random. */ vp->m_final.cno = 0; /* * !!! * Set up the flags so that an immediately subsequent 'u' will roll * forward, instead of backward. In historic vi, a 'u' following a * 'U' redid all of the changes to the line. Given that the user has * explicitly discarded those changes by entering 'U', it seems likely * that the user wants something between the original and end forms of * the line, so starting to replay the changes seems the best way to * get to there. */ F_SET(sp->ep, F_UNDO); sp->ep->lundo = BACKWARD; return (log_setline(sp)); } /* * v_undo -- u * Undo the last change. * * PUBLIC: int v_undo __P((SCR *, VICMD *)); */ int v_undo(sp, vp) SCR *sp; VICMD *vp; { EXF *ep; /* Set the command count. */ VIP(sp)->u_ccnt = sp->ccnt; /* * !!! * In historic vi, 'u' toggled between "undo" and "redo", i.e. 'u' * undid the last undo. However, if there has been a change since * the last undo/redo, we always do an undo. To make this work when * the user can undo multiple operations, we leave the old semantic * unchanged, but make '.' after a 'u' do another undo/redo operation. * This has two problems. * * The first is that 'u' didn't set '.' in historic vi. So, if a * user made a change, realized it was in the wrong place, does a * 'u' to undo it, moves to the right place and then does '.', the * change was reapplied. To make this work, we only apply the '.' * to the undo command if it's the command immediately following an * undo command. See vi/vi.c:getcmd() for the details. * * The second is that the traditional way to view the numbered cut * buffers in vi was to enter the commands "1pu.u.u.u. which will * no longer work because the '.' immediately follows the 'u' command. * Since we provide a much better method of viewing buffers, and * nobody can think of a better way of adding in multiple undo, this * remains broken. * * !!! * There is change to historic practice for the final cursor position * in this implementation. In historic vi, if an undo was isolated to * a single line, the cursor moved to the start of the change, and * then, subsequent 'u' commands would not move it again. (It has been * pointed out that users used multiple undo commands to get the cursor * to the start of the changed text.) Nvi toggles between the cursor * position before and after the change was made. One final issue is * that historic vi only did this if the user had not moved off of the * line before entering the undo command; otherwise, vi would move the * cursor to the most attractive position on the changed line. * * It would be difficult to match historic practice in this area. You * not only have to know that the changes were isolated to one line, * but whether it was the first or second undo command as well. And, * to completely match historic practice, we'd have to track users line * changes, too. This isn't worth the effort. */ ep = sp->ep; if (!F_ISSET(ep, F_UNDO)) { F_SET(ep, F_UNDO); ep->lundo = BACKWARD; } else if (!F_ISSET(vp, VC_ISDOT)) ep->lundo = ep->lundo == BACKWARD ? FORWARD : BACKWARD; switch (ep->lundo) { case BACKWARD: return (log_backward(sp, &vp->m_final)); case FORWARD: return (log_forward(sp, &vp->m_final)); default: abort(); } /* NOTREACHED */ } vigor-0.016.orig/vi/v_util.c0100644000076400007640000000606607103707240014362 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_util.c 10.11 (Berkeley) 6/30/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_eof -- * Vi end-of-file error. * * PUBLIC: void v_eof __P((SCR *, MARK *)); */ void v_eof(sp, mp) SCR *sp; MARK *mp; { recno_t lno; if (mp == NULL) v_emsg(sp, NULL, VIM_EOF); else { if (db_last(sp, &lno)) return; if (mp->lno >= lno) v_emsg(sp, NULL, VIM_EOF); else msgq(sp, M_BERR, "195|Movement past the end-of-file"); } } /* * v_eol -- * Vi end-of-line error. * * PUBLIC: void v_eol __P((SCR *, MARK *)); */ void v_eol(sp, mp) SCR *sp; MARK *mp; { size_t len; if (mp == NULL) v_emsg(sp, NULL, VIM_EOL); else { if (db_get(sp, mp->lno, DBG_FATAL, NULL, &len)) return; if (mp->cno == len - 1) v_emsg(sp, NULL, VIM_EOL); else msgq(sp, M_BERR, "196|Movement past the end-of-line"); } } /* * v_nomove -- * Vi no cursor movement error. * * PUBLIC: void v_nomove __P((SCR *)); */ void v_nomove(sp) SCR *sp; { msgq(sp, M_BERR, "197|No cursor movement made"); } /* * v_sof -- * Vi start-of-file error. * * PUBLIC: void v_sof __P((SCR *, MARK *)); */ void v_sof(sp, mp) SCR *sp; MARK *mp; { if (mp == NULL || mp->lno == 1) msgq(sp, M_BERR, "198|Already at the beginning of the file"); else msgq(sp, M_BERR, "199|Movement past the beginning of the file"); } /* * v_sol -- * Vi start-of-line error. * * PUBLIC: void v_sol __P((SCR *)); */ void v_sol(sp) SCR *sp; { msgq(sp, M_BERR, "200|Already in the first column"); } /* * v_isempty -- * Return if the line contains nothing but white-space characters. * * PUBLIC: int v_isempty __P((char *, size_t)); */ int v_isempty(p, len) char *p; size_t len; { for (; len--; ++p) if (!isblank(*p)) return (0); return (1); } /* * v_emsg -- * Display a few common vi messages. * * PUBLIC: void v_emsg __P((SCR *, char *, vim_t)); */ void v_emsg(sp, p, which) SCR *sp; char *p; vim_t which; { switch (which) { case VIM_COMBUF: msgq(sp, M_ERR, "201|Buffers should be specified before the command"); break; case VIM_EMPTY: msgq(sp, M_BERR, "209|The file is empty"); break; case VIM_EOF: msgq(sp, M_BERR, "202|Already at end-of-file"); break; case VIM_EOL: msgq(sp, M_BERR, "203|Already at end-of-line"); break; case VIM_NOCOM: case VIM_NOCOM_B: msgq(sp, which == VIM_NOCOM_B ? M_BERR : M_ERR, "204|%s isn't a vi command", p); break; case VIM_WRESIZE: msgq(sp, M_ERR, "Window resize interrupted text input mode"); break; case VIM_USAGE: msgq(sp, M_ERR, "205|Usage: %s", p); break; } } vigor-0.016.orig/vi/v_word.c0100644000076400007640000003212507103707240014353 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_word.c 10.5 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * There are two types of "words". Bigwords are easy -- groups of anything * delimited by whitespace. Normal words are trickier. They are either a * group of characters, numbers and underscores, or a group of anything but, * delimited by whitespace. When for a word, if you're in whitespace, it's * easy, just remove the whitespace and go to the beginning or end of the * word. Otherwise, figure out if the next character is in a different group. * If it is, go to the beginning or end of that group, otherwise, go to the * beginning or end of the current group. The historic version of vi didn't * get this right, so, for example, there were cases where "4e" was not the * same as "eeee" -- in particular, single character words, and commands that * began in whitespace were almost always handled incorrectly. To get it right * you have to resolve the cursor after each search so that the look-ahead to * figure out what type of "word" the cursor is in will be correct. * * Empty lines, and lines that consist of only white-space characters count * as a single word, and the beginning and end of the file counts as an * infinite number of words. * * Movements associated with commands are different than movement commands. * For example, in "abc def", with the cursor on the 'a', "cw" is from * 'a' to 'c', while "w" is from 'a' to 'd'. In general, trailing white * space is discarded from the change movement. Another example is that, * in the same string, a "cw" on any white space character replaces that * single character, and nothing else. Ain't nothin' in here that's easy. * * One historic note -- in the original vi, the 'w', 'W' and 'B' commands * would treat groups of empty lines as individual words, i.e. the command * would move the cursor to each new empty line. The 'e' and 'E' commands * would treat groups of empty lines as a single word, i.e. the first use * would move past the group of lines. The 'b' command would just beep at * you, or, if you did it from the start of the line as part of a motion * command, go absolutely nuts. If the lines contained only white-space * characters, the 'w' and 'W' commands would just beep at you, and the 'B', * 'b', 'E' and 'e' commands would treat the group as a single word, and * the 'B' and 'b' commands will treat the lines as individual words. This * implementation treats all of these cases as a single white-space word. */ enum which {BIGWORD, LITTLEWORD}; static int bword __P((SCR *, VICMD *, enum which)); static int eword __P((SCR *, VICMD *, enum which)); static int fword __P((SCR *, VICMD *, enum which)); /* * v_wordW -- [count]W * Move forward a bigword at a time. * * PUBLIC: int v_wordW __P((SCR *, VICMD *)); */ int v_wordW(sp, vp) SCR *sp; VICMD *vp; { return (fword(sp, vp, BIGWORD)); } /* * v_wordw -- [count]w * Move forward a word at a time. * * PUBLIC: int v_wordw __P((SCR *, VICMD *)); */ int v_wordw(sp, vp) SCR *sp; VICMD *vp; { return (fword(sp, vp, LITTLEWORD)); } /* * fword -- * Move forward by words. */ static int fword(sp, vp, type) SCR *sp; VICMD *vp; enum which type; { enum { INWORD, NOTWORD } state; VCS cs; u_long cnt; cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cs.cs_lno = vp->m_start.lno; cs.cs_cno = vp->m_start.cno; if (cs_init(sp, &cs)) return (1); /* * If in white-space: * If the count is 1, and it's a change command, we're done. * Else, move to the first non-white-space character, which * counts as a single word move. If it's a motion command, * don't move off the end of the line. */ if (cs.cs_flags == CS_EMP || cs.cs_flags == 0 && isblank(cs.cs_ch)) { if (ISMOTION(vp) && cs.cs_flags != CS_EMP && cnt == 1) { if (ISCMD(vp->rkp, 'c')) return (0); if (ISCMD(vp->rkp, 'd') || ISCMD(vp->rkp, 'y')) { if (cs_fspace(sp, &cs)) return (1); goto ret; } } if (cs_fblank(sp, &cs)) return (1); --cnt; } /* * Cyclically move to the next word -- this involves skipping * over word characters and then any trailing non-word characters. * Note, for the 'w' command, the definition of a word keeps * switching. */ if (type == BIGWORD) while (cnt--) { for (;;) { if (cs_next(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; if (cs.cs_flags != 0 || isblank(cs.cs_ch)) break; } /* * If a motion command and we're at the end of the * last word, we're done. Delete and yank eat any * trailing blanks, but we don't move off the end * of the line regardless. */ if (cnt == 0 && ISMOTION(vp)) { if ((ISCMD(vp->rkp, 'd') || ISCMD(vp->rkp, 'y')) && cs_fspace(sp, &cs)) return (1); break; } /* Eat whitespace characters. */ if (cs_fblank(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; } else while (cnt--) { state = cs.cs_flags == 0 && inword(cs.cs_ch) ? INWORD : NOTWORD; for (;;) { if (cs_next(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; if (cs.cs_flags != 0 || isblank(cs.cs_ch)) break; if (state == INWORD) { if (!inword(cs.cs_ch)) break; } else if (inword(cs.cs_ch)) break; } /* See comment above. */ if (cnt == 0 && ISMOTION(vp)) { if ((ISCMD(vp->rkp, 'd') || ISCMD(vp->rkp, 'y')) && cs_fspace(sp, &cs)) return (1); break; } /* Eat whitespace characters. */ if (cs.cs_flags != 0 || isblank(cs.cs_ch)) if (cs_fblank(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; } /* * If we didn't move, we must be at EOF. * * !!! * That's okay for motion commands, however. */ ret: if (!ISMOTION(vp) && cs.cs_lno == vp->m_start.lno && cs.cs_cno == vp->m_start.cno) { v_eof(sp, &vp->m_start); return (1); } /* Adjust the end of the range for motion commands. */ vp->m_stop.lno = cs.cs_lno; vp->m_stop.cno = cs.cs_cno; if (ISMOTION(vp) && cs.cs_flags == 0) --vp->m_stop.cno; /* * Non-motion commands move to the end of the range. Delete * and yank stay at the start, ignore others. */ vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; return (0); } /* * v_wordE -- [count]E * Move forward to the end of the bigword. * * PUBLIC: int v_wordE __P((SCR *, VICMD *)); */ int v_wordE(sp, vp) SCR *sp; VICMD *vp; { return (eword(sp, vp, BIGWORD)); } /* * v_worde -- [count]e * Move forward to the end of the word. * * PUBLIC: int v_worde __P((SCR *, VICMD *)); */ int v_worde(sp, vp) SCR *sp; VICMD *vp; { return (eword(sp, vp, LITTLEWORD)); } /* * eword -- * Move forward to the end of the word. */ static int eword(sp, vp, type) SCR *sp; VICMD *vp; enum which type; { enum { INWORD, NOTWORD } state; VCS cs; u_long cnt; cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cs.cs_lno = vp->m_start.lno; cs.cs_cno = vp->m_start.cno; if (cs_init(sp, &cs)) return (1); /* * !!! * If in whitespace, or the next character is whitespace, move past * it. (This doesn't count as a word move.) Stay at the character * past the current one, it sets word "state" for the 'e' command. */ if (cs.cs_flags == 0 && !isblank(cs.cs_ch)) { if (cs_next(sp, &cs)) return (1); if (cs.cs_flags == 0 && !isblank(cs.cs_ch)) goto start; } if (cs_fblank(sp, &cs)) return (1); /* * Cyclically move to the next word -- this involves skipping * over word characters and then any trailing non-word characters. * Note, for the 'e' command, the definition of a word keeps * switching. */ start: if (type == BIGWORD) while (cnt--) { for (;;) { if (cs_next(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; if (cs.cs_flags != 0 || isblank(cs.cs_ch)) break; } /* * When we reach the start of the word after the last * word, we're done. If we changed state, back up one * to the end of the previous word. */ if (cnt == 0) { if (cs.cs_flags == 0 && cs_prev(sp, &cs)) return (1); break; } /* Eat whitespace characters. */ if (cs_fblank(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; } else while (cnt--) { state = cs.cs_flags == 0 && inword(cs.cs_ch) ? INWORD : NOTWORD; for (;;) { if (cs_next(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; if (cs.cs_flags != 0 || isblank(cs.cs_ch)) break; if (state == INWORD) { if (!inword(cs.cs_ch)) break; } else if (inword(cs.cs_ch)) break; } /* See comment above. */ if (cnt == 0) { if (cs.cs_flags == 0 && cs_prev(sp, &cs)) return (1); break; } /* Eat whitespace characters. */ if (cs.cs_flags != 0 || isblank(cs.cs_ch)) if (cs_fblank(sp, &cs)) return (1); if (cs.cs_flags == CS_EOF) goto ret; } /* * If we didn't move, we must be at EOF. * * !!! * That's okay for motion commands, however. */ ret: if (!ISMOTION(vp) && cs.cs_lno == vp->m_start.lno && cs.cs_cno == vp->m_start.cno) { v_eof(sp, &vp->m_start); return (1); } /* Set the end of the range for motion commands. */ vp->m_stop.lno = cs.cs_lno; vp->m_stop.cno = cs.cs_cno; /* * Non-motion commands move to the end of the range. * Delete and yank stay at the start, ignore others. */ vp->m_final = ISMOTION(vp) ? vp->m_start : vp->m_stop; return (0); } /* * v_WordB -- [count]B * Move backward a bigword at a time. * * PUBLIC: int v_wordB __P((SCR *, VICMD *)); */ int v_wordB(sp, vp) SCR *sp; VICMD *vp; { return (bword(sp, vp, BIGWORD)); } /* * v_wordb -- [count]b * Move backward a word at a time. * * PUBLIC: int v_wordb __P((SCR *, VICMD *)); */ int v_wordb(sp, vp) SCR *sp; VICMD *vp; { return (bword(sp, vp, LITTLEWORD)); } /* * bword -- * Move backward by words. */ static int bword(sp, vp, type) SCR *sp; VICMD *vp; enum which type; { enum { INWORD, NOTWORD } state; VCS cs; u_long cnt; cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; cs.cs_lno = vp->m_start.lno; cs.cs_cno = vp->m_start.cno; if (cs_init(sp, &cs)) return (1); /* * !!! * If in whitespace, or the previous character is whitespace, move * past it. (This doesn't count as a word move.) Stay at the * character before the current one, it sets word "state" for the * 'b' command. */ if (cs.cs_flags == 0 && !isblank(cs.cs_ch)) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags == 0 && !isblank(cs.cs_ch)) goto start; } if (cs_bblank(sp, &cs)) return (1); /* * Cyclically move to the beginning of the previous word -- this * involves skipping over word characters and then any trailing * non-word characters. Note, for the 'b' command, the definition * of a word keeps switching. */ start: if (type == BIGWORD) while (cnt--) { for (;;) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags == CS_SOF) goto ret; if (cs.cs_flags != 0 || isblank(cs.cs_ch)) break; } /* * When we reach the end of the word before the last * word, we're done. If we changed state, move forward * one to the end of the next word. */ if (cnt == 0) { if (cs.cs_flags == 0 && cs_next(sp, &cs)) return (1); break; } /* Eat whitespace characters. */ if (cs_bblank(sp, &cs)) return (1); if (cs.cs_flags == CS_SOF) goto ret; } else while (cnt--) { state = cs.cs_flags == 0 && inword(cs.cs_ch) ? INWORD : NOTWORD; for (;;) { if (cs_prev(sp, &cs)) return (1); if (cs.cs_flags == CS_SOF) goto ret; if (cs.cs_flags != 0 || isblank(cs.cs_ch)) break; if (state == INWORD) { if (!inword(cs.cs_ch)) break; } else if (inword(cs.cs_ch)) break; } /* See comment above. */ if (cnt == 0) { if (cs.cs_flags == 0 && cs_next(sp, &cs)) return (1); break; } /* Eat whitespace characters. */ if (cs.cs_flags != 0 || isblank(cs.cs_ch)) if (cs_bblank(sp, &cs)) return (1); if (cs.cs_flags == CS_SOF) goto ret; } /* If we didn't move, we must be at SOF. */ ret: if (cs.cs_lno == vp->m_start.lno && cs.cs_cno == vp->m_start.cno) { v_sof(sp, &vp->m_start); return (1); } /* Set the end of the range for motion commands. */ vp->m_stop.lno = cs.cs_lno; vp->m_stop.cno = cs.cs_cno; /* * All commands move to the end of the range. Motion commands * adjust the starting point to the character before the current * one. * * !!! * The historic vi didn't get this right -- the `yb' command yanked * the right stuff and even updated the cursor value, but the cursor * was not actually updated on the screen. */ vp->m_final = vp->m_stop; if (ISMOTION(vp)) --vp->m_start.cno; return (0); } vigor-0.016.orig/vi/v_xchar.c0100644000076400007640000000541307103707240014505 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_xchar.c 10.9 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_xchar -- [buffer] [count]x * Deletes the character(s) on which the cursor sits. * * PUBLIC: int v_xchar __P((SCR *, VICMD *)); */ int v_xchar(sp, vp) SCR *sp; VICMD *vp; { size_t len; int isempty; /* Yes, this does not describe counts. Remember that the * omission of such details also plagues other products' * similar systems. */ vigor_maybe_wizard((F_ISSET(vp, VC_C1SET) ? (vp->count > 33 ? 100 : vp->count * 3): 3), "\"delete\"", "\"delete a character\"", "\"delete a word\"", "\"delete a line\"", 0, "\"To delete a character, you need to press the " "delete character key. If you need to delete " "several characters, press the delete character " "key several times.\"", sp->gp); if (db_eget(sp, vp->m_start.lno, NULL, &len, &isempty)) { if (isempty) goto nodel; return (1); } if (len == 0) { nodel: msgq(sp, M_BERR, "206|No characters to delete"); return (1); } /* * Delete from the cursor toward the end of line, w/o moving the * cursor. * * !!! * Note, "2x" at EOL isn't the same as "xx" because the left movement * of the cursor as part of the 'x' command isn't taken into account. * Historically correct. */ if (F_ISSET(vp, VC_C1SET)) vp->m_stop.cno += vp->count - 1; if (vp->m_stop.cno >= len - 1) { vp->m_stop.cno = len - 1; vp->m_final.cno = vp->m_start.cno ? vp->m_start.cno - 1 : 0; } else vp->m_final.cno = vp->m_start.cno; if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, 0)) return (1); return (del(sp, &vp->m_start, &vp->m_stop, 0)); } /* * v_Xchar -- [buffer] [count]X * Deletes the character(s) immediately before the current cursor * position. * * PUBLIC: int v_Xchar __P((SCR *, VICMD *)); */ int v_Xchar(sp, vp) SCR *sp; VICMD *vp; { u_long cnt; if (vp->m_start.cno == 0) { v_sol(sp); return (1); } cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; if (cnt >= vp->m_start.cno) vp->m_start.cno = 0; else vp->m_start.cno -= cnt; --vp->m_stop.cno; vp->m_final.cno = vp->m_start.cno; if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, 0)) return (1); return (del(sp, &vp->m_start, &vp->m_stop, 0)); } vigor-0.016.orig/vi/v_delete.c0100644000076400007640000000501207103707240014635 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_delete.c 10.9 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_delete -- [buffer][count]d[count]motion * [buffer][count]D * Delete a range of text. * * PUBLIC: int v_delete __P((SCR *, VICMD *)); */ int v_delete(sp, vp) SCR *sp; VICMD *vp; { recno_t nlines; size_t len; int lmode; vigor_maybe_confirm(75, "\"Are you absolutely sure you want to go through with this deletion?\"", sp->gp); lmode = F_ISSET(vp, VM_LMODE) ? CUT_LINEMODE : 0; /* Yank the lines. */ if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, lmode | (F_ISSET(vp, VM_CUTREQ) ? CUT_NUMREQ : CUT_NUMOPT))) return (1); /* Delete the lines. */ if (del(sp, &vp->m_start, &vp->m_stop, lmode)) return (1); /* * Check for deletion of the entire file. Try to check a close * by line so we don't go to the end of the file unnecessarily. */ if (!db_exist(sp, vp->m_final.lno + 1)) { if (db_last(sp, &nlines)) return (1); if (nlines == 0) { vp->m_final.lno = 1; vp->m_final.cno = 0; return (0); } } /* * One special correction, in case we've deleted the current line or * character. We check it here instead of checking in every command * that can be a motion component. */ if (db_get(sp, vp->m_final.lno, 0, NULL, &len)) { if (db_get(sp, nlines, DBG_FATAL, NULL, &len)) return (1); vp->m_final.lno = nlines; } /* * !!! * Cursor movements, other than those caused by a line mode command * moving to another line, historically reset the relative position. * * This currently matches the check made in v_yank(), I'm hoping that * they should be consistent... */ if (!F_ISSET(vp, VM_LMODE)) { F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SET); /* Make sure the set cursor position exists. */ if (vp->m_final.cno >= len) vp->m_final.cno = len ? len - 1 : 0; } /* * !!! * The "dd" command moved to the first non-blank; "d" * didn't. */ if (F_ISSET(vp, VM_LDOUBLE)) { F_CLR(vp, VM_RCM_MASK); F_SET(vp, VM_RCM_SETFNB); } return (0); } vigor-0.016.orig/vi/v_zexit.c0100644000076400007640000000217107103707240014541 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_zexit.c 10.6 (Berkeley) 4/27/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_zexit -- ZZ * Save the file and exit. * * PUBLIC: int v_zexit __P((SCR *, VICMD *)); */ int v_zexit(sp, vp) SCR *sp; VICMD *vp; { /* Write back any modifications. */ if (F_ISSET(sp->ep, F_MODIFIED) && file_write(sp, NULL, NULL, NULL, FS_ALL)) return (1); /* Check to make sure it's not a temporary file. */ if (file_m3(sp, 0)) return (1); /* Check for more files to edit. */ if (ex_ncheck(sp, 0)) return (1); vigor_confirm("\"Don't go! The text needs you! It depends on you!\"", sp->gp); F_SET(sp, SC_EXIT); return (0); } vigor-0.016.orig/vi/tags0120777000076400007640000000000007107504605015763 2../build/tagsustar cjw44cjw44vigor-0.016.orig/vi/vi.c0100644000076400007640000007460207103707240013477 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)vi.c 10.57 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" #include "vigor_extern.h" typedef enum { GC_ERR, GC_ERR_NOFLUSH, GC_EVENT, GC_FATAL, GC_INTERRUPT, GC_OK } gcret_t; static VIKEYS const *v_alias __P((SCR *, VICMD *, VIKEYS const *)); static gcret_t v_cmd __P((SCR *, VICMD *, VICMD *, VICMD *, int *, int *)); static int v_count __P((SCR *, ARG_CHAR_T, u_long *)); static void v_dtoh __P((SCR *)); static int v_init __P((SCR *)); static gcret_t v_key __P((SCR *, int, EVENT *, u_int32_t)); static int v_keyword __P((SCR *)); static int v_motion __P((SCR *, VICMD *, VICMD *, int *)); #if defined(DEBUG) && defined(COMLOG) static void v_comlog __P((SCR *, VICMD *)); #endif /* * Side-effect: * The dot structure can be set by the underlying vi functions, * see v_Put() and v_put(). */ #define DOT (&VIP(sp)->sdot) #define DOTMOTION (&VIP(sp)->sdotmotion) /* * vi -- * Main vi command loop. * * PUBLIC: int vi __P((SCR **)); */ int vi(spp) SCR **spp; { GS *gp; MARK abs; SCR *next, *sp; VICMD cmd, *vp; VI_PRIVATE *vip; int comcount, mapped, rval; /* Get the first screen. */ sp = *spp; gp = sp->gp; /* Initialize the command structure. */ vp = &cmd; memset(vp, 0, sizeof(VICMD)); /* Reset strange attraction. */ F_SET(vp, VM_RCM_SET); /* Initialize vigor. */ if (vigor_init(gp)) return (1); /* Initialize the vi screen. */ if (v_init(sp)) return (1); /* Set the focus. */ (void)sp->gp->scr_rename(sp, sp->frp->name, 1); for (vip = VIP(sp), rval = 0;;) { /* Resolve messages. */ if (!MAPPED_KEYS_WAITING(sp) && vs_resolve(sp, NULL, 0)) goto ret; /* * If not skipping a refresh, return to command mode and * refresh the screen. */ if (F_ISSET(vip, VIP_S_REFRESH)) F_CLR(vip, VIP_S_REFRESH); else { sp->showmode = SM_COMMAND; if (vs_refresh(sp, 0)) goto ret; } /* Set the new favorite position. */ if (F_ISSET(vp, VM_RCM_SET | VM_RCM_SETFNB | VM_RCM_SETNNB)) { F_CLR(vip, VIP_RCM_LAST); (void)vs_column(sp, &sp->rcm); } /* * If not currently in a map, log the cursor position, * and set a flag so that this command can become the * DOT command. */ if (MAPPED_KEYS_WAITING(sp)) mapped = 1; else { if (log_cursor(sp)) goto err; mapped = 0; } /* * There may be an ex command waiting, and we returned here * only because we exited a screen or file. In this case, * we simply go back into the ex parser. */ if (EXCMD_RUNNING(gp)) { vp->kp = &vikeys[':']; goto ex_continue; } /* Refresh the command structure. */ memset(vp, 0, sizeof(VICMD)); /* * We get a command, which may or may not have an associated * motion. If it does, we get it too, calling its underlying * function to get the resulting mark. We then call the * command setting the cursor to the resulting mark. * * !!! * Vi historically flushed mapped characters on error, but * entering extra characters at the beginning of * a map wasn't considered an error -- in fact, users would * put leading characters in maps to clean up vi * state before the map was interpreted. Beauty! */ switch (v_cmd(sp, DOT, vp, NULL, &comcount, &mapped)) { case GC_ERR: goto err; case GC_ERR_NOFLUSH: goto gc_err_noflush; case GC_EVENT: if (v_event_exec(sp, vp)) goto err; goto gc_event; case GC_FATAL: goto ret; case GC_INTERRUPT: goto intr; case GC_OK: break; } /* Check for security setting. */ if (F_ISSET(vp->kp, V_SECURE) && O_ISSET(sp, O_SECURE)) { ex_emsg(sp, KEY_NAME(sp, vp->key), EXM_SECURE); goto err; } /* * Historical practice: if a dot command gets a new count, * any motion component goes away, i.e. "d3w2." deletes a * total of 5 words. */ if (F_ISSET(vp, VC_ISDOT) && comcount) DOTMOTION->count = 1; /* Copy the key flags into the local structure. */ F_SET(vp, vp->kp->flags); /* Prepare to set the previous context. */ if (F_ISSET(vp, V_ABS | V_ABS_C | V_ABS_L)) { abs.lno = sp->lno; abs.cno = sp->cno; } /* * Set the three cursor locations to the current cursor. The * underlying routines don't bother if the cursor doesn't move. * This also handles line commands (e.g. Y) defaulting to the * current line. */ vp->m_start.lno = vp->m_stop.lno = vp->m_final.lno = sp->lno; vp->m_start.cno = vp->m_stop.cno = vp->m_final.cno = sp->cno; /* * Do any required motion; v_motion sets the from MARK and the * line mode flag, as well as the VM_RCM flags. */ if (F_ISSET(vp, V_MOTION) && v_motion(sp, DOTMOTION, vp, &mapped)) { if (INTERRUPTED(sp)) goto intr; goto err; } /* * If a count is set and the command is line oriented, set the * to MARK here relative to the cursor/from MARK. This is for * commands that take both counts and motions, i.e. "4yy" and * "y%". As there's no way the command can know which the user * did, we have to do it here. (There are commands that are * line oriented and that take counts ("#G", "#H"), for which * this calculation is either completely meaningless or wrong. * Each command must validate the value for itself. */ if (F_ISSET(vp, VC_C1SET) && F_ISSET(vp, VM_LMODE)) vp->m_stop.lno += vp->count - 1; /* Increment the command count. */ ++sp->ccnt; #if defined(DEBUG) && defined(COMLOG) v_comlog(sp, vp); #endif /* Call the function. */ ex_continue: if (vp->kp->func(sp, vp)) goto err; gc_event: #ifdef DEBUG /* Make sure no function left the temporary space locked. */ if (F_ISSET(gp, G_TMP_INUSE)) { F_CLR(gp, G_TMP_INUSE); msgq(sp, M_ERR, "232|vi: temporary buffer not released"); } #endif /* * If we're exiting this screen, move to the next one, or, if * there aren't any more, return to the main editor loop. The * ordering is careful, don't discard the contents of sp until * the end. */ if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) { if (file_end(sp, NULL, F_ISSET(sp, SC_EXIT_FORCE))) goto ret; if (vs_discard(sp, &next)) goto ret; if (next == NULL && vs_swap(sp, &next, NULL)) goto ret; *spp = next; if (screen_end(sp)) goto ret; if (next == NULL) break; /* Switch screens, change focus. */ sp = next; vip = VIP(sp); (void)sp->gp->scr_rename(sp, sp->frp->name, 1); /* Don't trust the cursor. */ F_SET(vip, VIP_CUR_INVALID); continue; } /* * Set the dot command structure. * * !!! * Historically, commands which used mapped keys did not * set the dot command, with the exception of the text * input commands. */ if (F_ISSET(vp, V_DOT) && !mapped) { *DOT = cmd; F_SET(DOT, VC_ISDOT); /* * If a count was supplied for both the command and * its motion, the count was used only for the motion. * Turn the count back on for the dot structure. */ if (F_ISSET(vp, VC_C1RESET)) F_SET(DOT, VC_C1SET); /* VM flags aren't retained. */ F_CLR(DOT, VM_COMMASK | VM_RCM_MASK); } /* * Some vi row movements are "attracted" to the last position * set, i.e. the VM_RCM commands are moths to the VM_RCM_SET * commands' candle. If the movement is to the EOL the vi * command handles it. If it's to the beginning, we handle it * here. * * Note, some commands (e.g. _, ^) don't set the VM_RCM_SETFNB * flag, but do the work themselves. The reason is that they * have to modify the column in case they're being used as a * motion component. Other similar commands (e.g. +, -) don't * have to modify the column because they are always line mode * operations when used as motions, so the column number isn't * of any interest. * * Does this totally violate the screen and editor layering? * You betcha. As they say, if you think you understand it, * you don't. */ switch (F_ISSET(vp, VM_RCM_MASK)) { case 0: case VM_RCM_SET: break; case VM_RCM: vp->m_final.cno = vs_rcm(sp, vp->m_final.lno, F_ISSET(vip, VIP_RCM_LAST)); break; case VM_RCM_SETLAST: F_SET(vip, VIP_RCM_LAST); break; case VM_RCM_SETFNB: vp->m_final.cno = 0; /* FALLTHROUGH */ case VM_RCM_SETNNB: if (nonblank(sp, vp->m_final.lno, &vp->m_final.cno)) goto err; break; default: abort(); } /* Update the cursor. */ sp->lno = vp->m_final.lno; sp->cno = vp->m_final.cno; /* * Set the absolute mark -- set even if a tags or similar * command, since the tag may be moving to the same file. */ if ((F_ISSET(vp, V_ABS) || F_ISSET(vp, V_ABS_L) && sp->lno != abs.lno || F_ISSET(vp, V_ABS_C) && (sp->lno != abs.lno || sp->cno != abs.cno)) && mark_set(sp, ABSMARK1, &abs, 1)) goto err; if (0) { err: if (v_event_flush(sp, CH_MAPPED)) msgq(sp, M_BERR, "110|Vi command failed: mapped keys discarded"); } /* * Check and clear interrupts. There's an obvious race, but * it's not worth fixing. */ gc_err_noflush: if (INTERRUPTED(sp)) { intr: CLR_INTERRUPT(sp); if (v_event_flush(sp, CH_MAPPED)) msgq(sp, M_ERR, "231|Interrupted: mapped keys discarded"); else msgq(sp, M_ERR, "236|Interrupted"); } /* If the last command switched screens, update. */ if (F_ISSET(sp, SC_SSWITCH)) { F_CLR(sp, SC_SSWITCH); /* * If the current screen is still displayed, it will * need a new status line. */ F_SET(sp, SC_STATUS); /* Switch screens, change focus. */ sp = sp->nextdisp; vip = VIP(sp); (void)sp->gp->scr_rename(sp, sp->frp->name, 1); /* Don't trust the cursor. */ F_SET(vip, VIP_CUR_INVALID); /* Refresh so we can display messages. */ if (vs_refresh(sp, 1)) return (1); } /* If the last command switched files, change focus. */ if (F_ISSET(sp, SC_FSWITCH)) { F_CLR(sp, SC_FSWITCH); (void)sp->gp->scr_rename(sp, sp->frp->name, 1); } /* If leaving vi, return to the main editor loop. */ if (F_ISSET(gp, G_SRESTART) || F_ISSET(sp, SC_EX)) { *spp = sp; v_dtoh(sp); break; } } if (0) ret: rval = 1; return (rval); } #define KEY(key, ec_flags) { \ if ((gcret = v_key(sp, 0, &ev, ec_flags)) != GC_OK) \ return (gcret); \ if (ev.e_value == K_ESCAPE) \ goto esc; \ if (F_ISSET(&ev.e_ch, CH_MAPPED)) \ *mappedp = 1; \ key = ev.e_c; \ } /* * The O_TILDEOP option makes the ~ command take a motion instead * of a straight count. This is the replacement structure we use * instead of the one currently in the VIKEYS table. * * XXX * This should probably be deleted -- it's not all that useful, and * we get help messages wrong. */ VIKEYS const tmotion = { v_mulcase, V_CNT|V_DOT|V_MOTION|VM_RCM_SET, "[count]~[count]motion", " ~ change case to motion" }; /* * v_cmd -- * * The command structure for vi is less complex than ex (and don't think * I'm not grateful!) The command syntax is: * * [count] [buffer] [count] key [[motion] | [buffer] [character]] * * and there are several special cases. The motion value is itself a vi * command, with the syntax: * * [count] key [character] */ static gcret_t v_cmd(sp, dp, vp, ismotion, comcountp, mappedp) SCR *sp; VICMD *dp, *vp; VICMD *ismotion; /* Previous key if getting motion component. */ int *comcountp, *mappedp; { enum { COMMANDMODE, ISPARTIAL, NOTPARTIAL } cpart; EVENT ev; VIKEYS const *kp; gcret_t gcret; u_int flags; CHAR_T key; char *s; /* * Get a key. * * cancels partial commands, i.e. a command where at least * one non-numeric character has been entered. Otherwise, it beeps * the terminal. * * !!! * POSIX 1003.2-1992 explicitly disallows cancelling commands where * all that's been entered is a number, requiring that the terminal * be alerted. */ cpart = ismotion == NULL ? COMMANDMODE : ISPARTIAL; if ((gcret = v_key(sp, ismotion == NULL, &ev, EC_MAPCOMMAND)) != GC_OK) { if (gcret == GC_EVENT) vp->ev = ev; return (gcret); } if (ev.e_value == K_ESCAPE) goto esc; if (F_ISSET(&ev.e_ch, CH_MAPPED)) *mappedp = 1; key = ev.e_c; if (ismotion == NULL) cpart = NOTPARTIAL; /* Pick up optional buffer. */ if (key == '"') { cpart = ISPARTIAL; if (ismotion != NULL) { v_emsg(sp, NULL, VIM_COMBUF); return (GC_ERR); } KEY(vp->buffer, 0); F_SET(vp, VC_BUFFER); KEY(key, EC_MAPCOMMAND); } /* * Pick up optional count, where a leading 0 is not a count, * it's a command. */ if (isdigit(key) && key != '0') { if (v_count(sp, key, &vp->count)) return (GC_ERR); F_SET(vp, VC_C1SET); *comcountp = 1; KEY(key, EC_MAPCOMMAND); } else *comcountp = 0; /* Pick up optional buffer. */ if (key == '"') { cpart = ISPARTIAL; if (F_ISSET(vp, VC_BUFFER)) { msgq(sp, M_ERR, "234|Only one buffer may be specified"); return (GC_ERR); } if (ismotion != NULL) { v_emsg(sp, NULL, VIM_COMBUF); return (GC_ERR); } KEY(vp->buffer, 0); F_SET(vp, VC_BUFFER); KEY(key, EC_MAPCOMMAND); } /* Check for an OOB command key. */ cpart = ISPARTIAL; if (key > MAXVIKEY) { v_emsg(sp, KEY_NAME(sp, key), VIM_NOCOM); return (GC_ERR); } kp = &vikeys[vp->key = key]; /* * !!! * Historically, D accepted and then ignored a count. Match it. */ if (vp->key == 'D' && F_ISSET(vp, VC_C1SET)) { *comcountp = 0; vp->count = 0; F_CLR(vp, VC_C1SET); } /* Check for command aliases. */ if (kp->func == NULL && (kp = v_alias(sp, vp, kp)) == NULL) return (GC_ERR); /* The tildeop option makes the ~ command take a motion. */ if (key == '~' && O_ISSET(sp, O_TILDEOP)) kp = &tmotion; vp->kp = kp; /* * Find the command. The only legal command with no underlying * function is dot. It's historic practice that doesn't * just erase the preceding number, it beeps the terminal as well. * It's a common problem, so just beep the terminal unless verbose * was set. */ if (kp->func == NULL) { if (key != '.') { v_emsg(sp, KEY_NAME(sp, key), ev.e_value == K_ESCAPE ? VIM_NOCOM_B : VIM_NOCOM); return (GC_ERR); } /* If called for a motion command, stop now. */ if (dp == NULL) goto usage; /* * !!! * If a '.' is immediately entered after an undo command, we * replay the log instead of redoing the last command. This * is necessary because 'u' can't set the dot command -- see * vi/v_undo.c:v_undo for details. */ if (VIP(sp)->u_ccnt == sp->ccnt) { vp->kp = &vikeys['u']; F_SET(vp, VC_ISDOT); return (GC_OK); } /* Otherwise, a repeatable command must have been executed. */ if (!F_ISSET(dp, VC_ISDOT)) { msgq(sp, M_ERR, "208|No command to repeat"); return (GC_ERR); } /* Set new count/buffer, if any, and return. */ if (F_ISSET(vp, VC_C1SET)) { F_SET(dp, VC_C1SET); dp->count = vp->count; } if (F_ISSET(vp, VC_BUFFER)) dp->buffer = vp->buffer; *vp = *dp; return (GC_OK); } /* Set the flags based on the command flags. */ flags = kp->flags; /* Check for illegal count. */ if (F_ISSET(vp, VC_C1SET) && !LF_ISSET(V_CNT)) goto usage; /* Illegal motion command. */ if (ismotion == NULL) { /* Illegal buffer. */ if (!LF_ISSET(V_OBUF) && F_ISSET(vp, VC_BUFFER)) goto usage; /* Required buffer. */ if (LF_ISSET(V_RBUF)) { KEY(vp->buffer, 0); F_SET(vp, VC_BUFFER); } } /* * Special case: '[', ']' and 'Z' commands. Doesn't the fact that * the *single* characters don't mean anything but the *doubled* * characters do, just frost your shorts? */ if (vp->key == '[' || vp->key == ']' || vp->key == 'Z') { /* * Historically, half entered [[, ]] or Z commands weren't * cancelled by , the terminal was beeped instead. * POSIX.2-1992 probably didn't notice, and requires that * they be cancelled instead of beeping. Seems fine to me. * * Don't set the EC_MAPCOMMAND flag, apparently ] is a popular * vi meta-character, and we don't want the user to wait while * we time out a possible mapping. This *appears* to match * historic vi practice, but with mapping characters, you Just * Never Know. */ KEY(key, 0); if (vp->key != key) { usage: if (ismotion == NULL) s = kp->usage; else if (ismotion->key == '~' && O_ISSET(sp, O_TILDEOP)) s = tmotion.usage; else s = vikeys[ismotion->key].usage; v_emsg(sp, s, VIM_USAGE); return (GC_ERR); } } /* Special case: 'z' command. */ if (vp->key == 'z') { KEY(vp->character, 0); if (isdigit(vp->character)) { if (v_count(sp, vp->character, &vp->count2)) return (GC_ERR); F_SET(vp, VC_C2SET); KEY(vp->character, 0); } } /* * Commands that have motion components can be doubled to * imply the current line. */ if (ismotion != NULL && ismotion->key != key && !LF_ISSET(V_MOVE)) { msgq(sp, M_ERR, "210|%s may not be used as a motion command", KEY_NAME(sp, key)); return (GC_ERR); } /* Required character. */ if (LF_ISSET(V_CHAR)) KEY(vp->character, 0); /* Get any associated cursor word. */ if (F_ISSET(kp, V_KEYW) && v_keyword(sp)) return (GC_ERR); return (GC_OK); esc: switch (cpart) { case COMMANDMODE: msgq(sp, M_BERR, "211|Already in command mode"); return (GC_ERR_NOFLUSH); case ISPARTIAL: break; case NOTPARTIAL: (void)sp->gp->scr_bell(sp); break; } return (GC_ERR); } /* * v_motion -- * * Get resulting motion mark. */ static int v_motion(sp, dm, vp, mappedp) SCR *sp; VICMD *dm, *vp; int *mappedp; { VICMD motion; size_t len; u_long cnt; u_int flags; int tilde_reset, notused; /* * If '.' command, use the dot motion, else get the motion command. * Clear any line motion flags, the subsequent motion isn't always * the same, i.e. "/aaa" may or may not be a line motion. */ if (F_ISSET(vp, VC_ISDOT)) { motion = *dm; F_SET(&motion, VC_ISDOT); F_CLR(&motion, VM_COMMASK); } else { memset(&motion, 0, sizeof(VICMD)); if (v_cmd(sp, NULL, &motion, vp, ¬used, mappedp) != GC_OK) return (1); } /* * A count may be provided both to the command and to the motion, in * which case the count is multiplicative. For example, "3y4y" is the * same as "12yy". This count is provided to the motion command and * not to the regular function. */ cnt = motion.count = F_ISSET(&motion, VC_C1SET) ? motion.count : 1; if (F_ISSET(vp, VC_C1SET)) { motion.count *= vp->count; F_SET(&motion, VC_C1SET); /* * Set flags to restore the original values of the command * structure so dot commands can change the count values, * e.g. "2dw" "3." deletes a total of five words. */ F_CLR(vp, VC_C1SET); F_SET(vp, VC_C1RESET); } /* * Some commands can be repeated to indicate the current line. In * this case, or if the command is a "line command", set the flags * appropriately. If not a doubled command, run the function to get * the resulting mark. */ if (vp->key == motion.key) { F_SET(vp, VM_LDOUBLE | VM_LMODE); /* Set the origin of the command. */ vp->m_start.lno = sp->lno; vp->m_start.cno = 0; /* * Set the end of the command. * * If the current line is missing, i.e. the file is empty, * historic vi permitted a "cc" or "!!" command to insert * text. */ vp->m_stop.lno = sp->lno + motion.count - 1; if (db_get(sp, vp->m_stop.lno, 0, NULL, &len)) { if (vp->m_stop.lno != 1 || vp->key != 'c' && vp->key != '!') { v_emsg(sp, NULL, VIM_EMPTY); return (1); } vp->m_stop.cno = 0; } else vp->m_stop.cno = len ? len - 1 : 0; } else { /* * Motion commands change the underlying movement (*snarl*). * For example, "l" is illegal at the end of a line, but "dl" * is not. Set flags so the function knows the situation. */ motion.rkp = vp->kp; /* * XXX * Use yank instead of creating a new motion command, it's a * lot easier for now. */ if (vp->kp == &tmotion) { tilde_reset = 1; vp->kp = &vikeys['y']; } else tilde_reset = 0; /* * Copy the key flags into the local structure, except for the * RCM flags -- the motion command will set the RCM flags in * the vp structure if necessary. This means that the motion * command is expected to determine where the cursor ends up! * However, we save off the current RCM mask and restore it if * it no RCM flags are set by the motion command, with a small * modification. * * We replace the VM_RCM_SET flag with the VM_RCM flag. This * is so that cursor movement doesn't set the relative position * unless the motion command explicitly specified it. This * appears to match historic practice, but I've never been able * to develop a hard-and-fast rule. */ flags = F_ISSET(vp, VM_RCM_MASK); if (LF_ISSET(VM_RCM_SET)) { LF_SET(VM_RCM); LF_CLR(VM_RCM_SET); } F_CLR(vp, VM_RCM_MASK); F_SET(&motion, motion.kp->flags & ~VM_RCM_MASK); /* * Set the three cursor locations to the current cursor. This * permits commands like 'j' and 'k', that are line oriented * motions and have special cursor suck semantics when they are * used as standalone commands, to ignore column positioning. */ motion.m_final.lno = motion.m_stop.lno = motion.m_start.lno = sp->lno; motion.m_final.cno = motion.m_stop.cno = motion.m_start.cno = sp->cno; /* Run the function. */ if ((motion.kp->func)(sp, &motion)) return (1); /* * If the current line is missing, i.e. the file is empty, * historic vi allowed "c" or "!" to insert * text. Otherwise fail -- most motion commands will have * already failed, but some, e.g. G, succeed in empty files. */ if (!db_exist(sp, vp->m_stop.lno)) { if (vp->m_stop.lno != 1 || vp->key != 'c' && vp->key != '!') { v_emsg(sp, NULL, VIM_EMPTY); return (1); } vp->m_stop.cno = 0; } /* * XXX * See above. */ if (tilde_reset) vp->kp = &tmotion; /* * Copy cut buffer, line mode and cursor position information * from the motion command structure, i.e. anything that the * motion command can set for us. The commands can flag the * movement as a line motion (see v_sentence) as well as set * the VM_RCM_* flags explicitly. */ F_SET(vp, F_ISSET(&motion, VM_COMMASK | VM_RCM_MASK)); /* * If the motion command set no relative motion flags, use * the (slightly) modified previous values. */ if (!F_ISSET(vp, VM_RCM_MASK)) F_SET(vp, flags); /* * Commands can change behaviors based on the motion command * used, for example, the ! command repeated the last bang * command if N or n was used as the motion. */ vp->rkp = motion.kp; /* * Motion commands can reset all of the cursor information. * If the motion is in the reverse direction, switch the * from and to MARK's so that it's in a forward direction. * Motions are from the from MARK to the to MARK (inclusive). */ if (motion.m_start.lno > motion.m_stop.lno || motion.m_start.lno == motion.m_stop.lno && motion.m_start.cno > motion.m_stop.cno) { vp->m_start = motion.m_stop; vp->m_stop = motion.m_start; } else { vp->m_start = motion.m_start; vp->m_stop = motion.m_stop; } vp->m_final = motion.m_final; } /* * If the command sets dot, save the motion structure. The motion * count was changed above and needs to be reset, that's why this * is done here, and not in the calling routine. */ if (F_ISSET(vp->kp, V_DOT)) { *dm = motion; dm->count = cnt; } return (0); } /* * v_init -- * Initialize the vi screen. */ static int v_init(sp) SCR *sp; { GS *gp; VI_PRIVATE *vip; gp = sp->gp; vip = VIP(sp); /* Switch into vi. */ if (gp->scr_screen(sp, SC_VI)) return (1); (void)gp->scr_attr(sp, SA_ALTERNATE, 1); F_CLR(sp, SC_EX | SC_SCR_EX); F_SET(sp, SC_VI); /* * Initialize screen values. * * Small windows: see vs_refresh(), section 6a. * * Setup: * t_minrows is the minimum rows to display * t_maxrows is the maximum rows to display (rows - 1) * t_rows is the rows currently being displayed */ sp->rows = vip->srows = O_VAL(sp, O_LINES); sp->cols = O_VAL(sp, O_COLUMNS); sp->t_rows = sp->t_minrows = O_VAL(sp, O_WINDOW); if (sp->rows != 1) { if (sp->t_rows > sp->rows - 1) { sp->t_minrows = sp->t_rows = sp->rows - 1; msgq(sp, M_INFO, "214|Windows option value is too large, max is %u", sp->t_rows); } sp->t_maxrows = sp->rows - 1; } else sp->t_maxrows = 1; sp->woff = 0; /* Create a screen map. */ CALLOC_RET(sp, HMAP, SMAP *, SIZE_HMAP(sp), sizeof(SMAP)); TMAP = HMAP + (sp->t_rows - 1); HMAP->lno = sp->lno; HMAP->coff = 0; HMAP->soff = 1; /* * Fill the screen map from scratch -- try and center the line. That * way if we're starting with a file we've seen before, we'll put the * line in the middle, otherwise, it won't work and we'll end up with * the line at the top. */ F_SET(sp, SC_SCR_REFORMAT | SC_SCR_CENTER); /* Invalidate the cursor. */ F_SET(vip, VIP_CUR_INVALID); /* Paint the screen image from scratch. */ F_SET(vip, VIP_N_EX_PAINT); return (0); } /* * v_dtoh -- * Move all but the current screen to the hidden queue. */ static void v_dtoh(sp) SCR *sp; { GS *gp; SCR *tsp; int hidden; /* Move all screens to the hidden queue, tossing screen maps. */ for (hidden = 0, gp = sp->gp; (tsp = gp->dq.cqh_first) != (void *)&gp->dq; ++hidden) { if (_HMAP(tsp) != NULL) { free(_HMAP(tsp)); _HMAP(tsp) = NULL; } CIRCLEQ_REMOVE(&gp->dq, tsp, q); CIRCLEQ_INSERT_TAIL(&gp->hq, tsp, q); } /* Move current screen back to the display queue. */ CIRCLEQ_REMOVE(&gp->hq, sp, q); CIRCLEQ_INSERT_TAIL(&gp->dq, sp, q); /* * XXX * Don't bother internationalizing this message, it's going to * go away as soon as we have one-line screens. --TK */ if (hidden > 1) msgq(sp, M_INFO, "%d screens backgrounded; use :display to list them", hidden - 1); } /* * v_keyword -- * Get the word (or non-word) the cursor is on. */ static int v_keyword(sp) SCR *sp; { VI_PRIVATE *vip; size_t beg, end, len; int moved, state; char *p; if (db_get(sp, sp->lno, DBG_FATAL, &p, &len)) return (1); /* * !!! * Historically, tag commands skipped over any leading whitespace * characters. Make this true in general when using cursor words. * If movement, getting a cursor word implies moving the cursor to * its beginning. Refresh now. * * !!! * Find the beginning/end of the keyword. Keywords are currently * used for cursor-word searching and for tags. Historical vi * only used the word in a tag search from the cursor to the end * of the word, i.e. if the cursor was on the 'b' in " abc ", the * tag was "bc". For consistency, we make cursor word searches * follow the same rule. */ for (moved = 0, beg = sp->cno; beg < len && isspace(p[beg]); moved = 1, ++beg); if (beg >= len) { msgq(sp, M_BERR, "212|Cursor not in a word"); return (1); } if (moved) { sp->cno = beg; (void)vs_refresh(sp, 0); } /* Find the end of the word. */ for (state = inword(p[beg]), end = beg; ++end < len && state == inword(p[end]);); vip = VIP(sp); len = (end - beg); BINC_RET(sp, vip->keyw, vip->klen, len); memmove(vip->keyw, p + beg, len); vip->keyw[len] = '\0'; /* XXX */ return (0); } /* * v_alias -- * Check for a command alias. */ static VIKEYS const * v_alias(sp, vp, kp) SCR *sp; VICMD *vp; VIKEYS const *kp; { CHAR_T push; switch (vp->key) { case 'C': /* C -> c$ */ push = '$'; vp->key = 'c'; break; case 'D': /* D -> d$ */ push = '$'; vp->key = 'd'; break; case 'S': /* S -> c_ */ push = '_'; vp->key = 'c'; break; case 'Y': /* Y -> y_ */ push = '_'; vp->key = 'y'; break; default: return (kp); } return (v_event_push(sp, NULL, &push, 1, CH_NOMAP | CH_QUOTED) ? NULL : &vikeys[vp->key]); } /* * v_count -- * Return the next count. */ static int v_count(sp, fkey, countp) SCR *sp; ARG_CHAR_T fkey; u_long *countp; { EVENT ev; u_long count, tc; ev.e_c = fkey; count = tc = 0; do { /* * XXX * Assume that overflow results in a smaller number. */ tc = count * 10 + ev.e_c - '0'; if (count > tc) { /* Toss to the next non-digit. */ do { if (v_key(sp, 0, &ev, EC_MAPCOMMAND | EC_MAPNODIGIT) != GC_OK) return (1); } while (isdigit(ev.e_c)); msgq(sp, M_ERR, "235|Number larger than %lu", ULONG_MAX); return (1); } count = tc; if (v_key(sp, 0, &ev, EC_MAPCOMMAND | EC_MAPNODIGIT) != GC_OK) return (1); } while (isdigit(ev.e_c)); *countp = count; return (0); } /* * v_key -- * Return the next event. */ static gcret_t v_key(sp, command_events, evp, ec_flags) SCR *sp; int command_events; EVENT *evp; u_int32_t ec_flags; { u_int32_t quote; for (quote = 0;;) { if (v_event_get(sp, evp, 0, ec_flags | quote)) return (GC_FATAL); quote = 0; switch (evp->e_event) { case E_CHARACTER: /* * !!! * Historically, ^V was ignored in the command stream, * although it had a useful side-effect of interrupting * mappings. Adding a quoting bit to the call probably * extends historic practice, but it feels right. */ if (evp->e_value == K_VLNEXT) { quote = EC_QUOTED; break; } return (GC_OK); case E_ERR: case E_EOF: return (GC_FATAL); case E_INTERRUPT: /* * !!! * Historically, vi beeped on command level interrupts. * * Historically, vi exited to ex mode if no file was * named on the command line, and two interrupts were * generated in a row. (Just figured you might want * to know that.) */ (void)sp->gp->scr_bell(sp); return (GC_INTERRUPT); case E_REPAINT: if (vs_repaint(sp, evp)) return (GC_FATAL); break; case E_WRESIZE: return (GC_ERR); case E_QUIT: case E_WRITE: if (command_events) return (GC_EVENT); /* FALLTHROUGH */ default: v_event_err(sp, evp); return (GC_ERR); } } /* NOTREACHED */ } #if defined(DEBUG) && defined(COMLOG) /* * v_comlog -- * Log the contents of the command structure. */ static void v_comlog(sp, vp) SCR *sp; VICMD *vp; { TRACE(sp, "vcmd: %c", vp->key); if (F_ISSET(vp, VC_BUFFER)) TRACE(sp, " buffer: %c", vp->buffer); if (F_ISSET(vp, VC_C1SET)) TRACE(sp, " c1: %lu", vp->count); if (F_ISSET(vp, VC_C2SET)) TRACE(sp, " c2: %lu", vp->count2); TRACE(sp, " flags: 0x%x\n", vp->flags); } #endif vigor-0.016.orig/vi/vi.h0100644000076400007640000003704007103707241013500 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)vi.h 10.19 (Berkeley) 6/30/96 */ /* Definition of a vi "word". */ #define inword(ch) (isalnum(ch) || (ch) == '_') typedef struct _vikeys VIKEYS; /* Structure passed around to functions implementing vi commands. */ typedef struct _vicmd { CHAR_T key; /* Command key. */ CHAR_T buffer; /* Buffer. */ CHAR_T character; /* Character. */ u_long count; /* Count. */ u_long count2; /* Second count (only used by z). */ EVENT ev; /* Associated event. */ #define ISCMD(p, key) ((p) == &vikeys[key]) VIKEYS const *kp; /* Command/Motion VIKEYS entry. */ #define ISMOTION(vp) (vp->rkp != NULL && F_ISSET(vp->rkp, V_MOTION)) VIKEYS const *rkp; /* Related C/M VIKEYS entry. */ /* * Historic vi allowed "dl" when the cursor was on the last column, * deleting the last character, and similarly allowed "dw" when * the cursor was on the last column of the file. It didn't allow * "dh" when the cursor was on column 1, although these cases are * not strictly analogous. The point is that some movements would * succeed if they were associated with a motion command, and fail * otherwise. This is part of the off-by-1 schizophrenia that * plagued vi. Other examples are that "dfb" deleted everything * up to and including the next 'b' character, while "d/b" deleted * everything up to the next 'b' character. While this implementation * regularizes the interface to the extent possible, there are many * special cases that can't be fixed. The special cases are handled * by setting flags per command so that the underlying command and * motion routines know what's really going on. * * The VM_* flags are set in the vikeys array and by the underlying * functions (motion component or command) as well. For this reason, * the flags in the VICMD and VIKEYS structures live in the same name * space. */ #define VM_CMDFAILED 0x00000001 /* Command failed. */ #define VM_CUTREQ 0x00000002 /* Always cut into numeric buffers. */ #define VM_LDOUBLE 0x00000004 /* Doubled command for line mode. */ #define VM_LMODE 0x00000008 /* Motion is line oriented. */ #define VM_COMMASK 0x0000000f /* Mask for VM flags. */ /* * The VM_RCM_* flags are single usage, i.e. if you set one, you have * to clear the others. */ #define VM_RCM 0x00000010 /* Use relative cursor movment (RCM). */ #define VM_RCM_SET 0x00000020 /* RCM: set to current position. */ #define VM_RCM_SETFNB 0x00000040 /* RCM: set to first non-blank (FNB). */ #define VM_RCM_SETLAST 0x00000080 /* RCM: set to last character. */ #define VM_RCM_SETNNB 0x00000100 /* RCM: set to next non-blank. */ #define VM_RCM_MASK 0x000001f0 /* Mask for RCM flags. */ /* Flags for the underlying function. */ #define VC_BUFFER 0x00000200 /* The buffer was set. */ #define VC_C1RESET 0x00000400 /* Reset C1SET flag for dot commands. */ #define VC_C1SET 0x00000800 /* Count 1 was set. */ #define VC_C2SET 0x00001000 /* Count 2 was set. */ #define VC_ISDOT 0x00002000 /* Command was the dot command. */ u_int32_t flags; /* * There are four cursor locations that we worry about: the initial * cursor position, the start of the range, the end of the range, * and the final cursor position. The initial cursor position and * the start of the range are both m_start, and are always the same. * All locations are initialized to the starting cursor position by * the main vi routines, and the underlying functions depend on this. * * Commands that can be motion components set the end of the range * cursor position, m_stop. All commands must set the ending cursor * position, m_final. The reason that m_stop isn't the same as m_final * is that there are situations where the final position of the cursor * is outside of the cut/delete range (e.g. 'd[[' from the first column * of a line). The final cursor position often varies based on the * direction of the movement, as well as the command. The only special * case that the delete code handles is that it will make adjustments * if the final cursor position is deleted. * * The reason for all of this is that the historic vi semantics were * defined command-by-command. Every function has to roll its own * starting and stopping positions, and adjust them if it's being used * as a motion component. The general rules are as follows: * * 1: If not a motion component, the final cursor is at the end * of the range. * 2: If moving backward in the file, delete and yank move the * final cursor to the end of the range. * 3: If moving forward in the file, delete and yank leave the * final cursor at the start of the range. * * Usually, if moving backward in the file and it's a motion component, * the starting cursor is decremented by a single character (or, in a * few cases, to the end of the previous line) so that the starting * cursor character isn't cut or deleted. No cursor adjustment is * needed for moving forward, because the cut/delete routines handle * m_stop inclusively, i.e. the last character in the range is cut or * deleted. This makes cutting to the EOF/EOL reasonable. * * The 'c', '<', '>', and '!' commands are special cases. We ignore * the final cursor position for all of them: for 'c', the text input * routines set the cursor to the last character inserted; for '<', * '>' and '!', the underlying ex commands that do the operation will * set the cursor for us, usually to something related to the first * . */ MARK m_start; /* mark: initial cursor, range start. */ MARK m_stop; /* mark: range end. */ MARK m_final; /* mark: final cursor position. */ } VICMD; /* Vi command table structure. */ struct _vikeys { /* Underlying function. */ int (*func) __P((SCR *, VICMD *)); #define V_ABS 0x00004000 /* Absolute movement, set '' mark. */ #define V_ABS_C 0x00008000 /* V_ABS: if the line/column changed. */ #define V_ABS_L 0x00010000 /* V_ABS: if the line changed. */ #define V_CHAR 0x00020000 /* Character (required, trailing). */ #define V_CNT 0x00040000 /* Count (optional, leading). */ #define V_DOT 0x00080000 /* On success, sets dot command. */ #define V_KEYW 0x00100000 /* Cursor referenced word. */ #define V_MOTION 0x00200000 /* Motion (required, trailing). */ #define V_MOVE 0x00400000 /* Command defines movement. */ #define V_OBUF 0x00800000 /* Buffer (optional, leading). */ #define V_RBUF 0x01000000 /* Buffer (required, trailing). */ #define V_SECURE 0x02000000 /* Permission denied if O_SECURE set. */ u_int32_t flags; char *usage; /* Usage line. */ char *help; /* Help line. */ }; #define MAXVIKEY 126 /* List of vi commands. */ extern VIKEYS const vikeys[MAXVIKEY + 1]; extern VIKEYS const tmotion; /* XXX Hacked ~ command. */ /* Character stream structure, prototypes. */ typedef struct _vcs { recno_t cs_lno; /* Line. */ size_t cs_cno; /* Column. */ CHAR_T *cs_bp; /* Buffer. */ size_t cs_len; /* Length. */ CHAR_T cs_ch; /* Character. */ #define CS_EMP 1 /* Empty line. */ #define CS_EOF 2 /* End-of-file. */ #define CS_EOL 3 /* End-of-line. */ #define CS_SOF 4 /* Start-of-file. */ int cs_flags; /* Return flags. */ } VCS; int cs_bblank __P((SCR *, VCS *)); int cs_fblank __P((SCR *, VCS *)); int cs_fspace __P((SCR *, VCS *)); int cs_init __P((SCR *, VCS *)); int cs_next __P((SCR *, VCS *)); int cs_prev __P((SCR *, VCS *)); /* * We use a single "window" for each set of vi screens. The model would be * simpler with two windows (one for the text, and one for the modeline) * because scrolling the text window down would work correctly then, not * affecting the mode line. As it is we have to play games to make it look * right. The reason for this choice is that it would be difficult for * curses to optimize the movement, i.e. detect that the downward scroll * isn't going to change the modeline, set the scrolling region on the * terminal and only scroll the first part of the text window. * * Structure for mapping lines to the screen. An SMAP is an array, with one * structure element per screen line, which holds information describing the * physical line which is displayed in the screen line. The first two fields * (lno and off) are all that are necessary to describe a line. The rest of * the information is useful to keep information from being re-calculated. * * The SMAP always has an entry for each line of the physical screen, plus a * slot for the colon command line, so there is room to add any screen into * another one at screen exit. * * Lno is the line number. If doing the historic vi long line folding, off * is the screen offset into the line. For example, the pair 2:1 would be * the first screen of line 2, and 2:2 would be the second. In the case of * long lines, the screen map will tend to be staggered, e.g., 1:1, 1:2, 1:3, * 2:1, 3:1, etc. If doing left-right scrolling, the off field is the screen * column offset into the lines, and can take on any value, as it's adjusted * by the user set value O_SIDESCROLL. */ typedef struct _smap { recno_t lno; /* 1-N: Physical file line number. */ size_t coff; /* 0-N: Column offset in the line. */ size_t soff; /* 1-N: Screen offset in the line. */ /* vs_line() cache information. */ size_t c_sboff; /* 0-N: offset of first character byte. */ size_t c_eboff; /* 0-N: offset of last character byte. */ u_int8_t c_scoff; /* 0-N: offset into the first character. */ u_int8_t c_eclen; /* 1-N: columns from the last character. */ u_int8_t c_ecsize; /* 1-N: size of the last character. */ } SMAP; /* Macros to flush/test cached information. */ #define SMAP_CACHE(smp) ((smp)->c_ecsize != 0) #define SMAP_FLUSH(smp) ((smp)->c_ecsize = 0) /* Character search information. */ typedef enum { CNOTSET, FSEARCH, fSEARCH, TSEARCH, tSEARCH } cdir_t; typedef enum { AB_NOTSET, AB_NOTWORD, AB_INWORD } abb_t; typedef enum { Q_NOTSET, Q_BNEXT, Q_BTHIS, Q_VNEXT, Q_VTHIS } quote_t; /* Vi private, per-screen memory. */ typedef struct _vi_private { VICMD cmd; /* Current command, motion. */ VICMD motion; /* * !!! * The saved command structure can be modified by the underlying * vi functions, see v_Put() and v_put(). */ VICMD sdot; /* Saved dot, motion command. */ VICMD sdotmotion; CHAR_T *keyw; /* Keyword buffer. */ size_t klen; /* Keyword length. */ size_t keywlen; /* Keyword buffer length. */ CHAR_T rlast; /* Last 'r' replacement character. */ e_key_t rvalue; /* Value of last replacement character. */ EVENT *rep; /* Input replay buffer. */ size_t rep_len; /* Input replay buffer length. */ size_t rep_cnt; /* Input replay buffer characters. */ mtype_t mtype; /* Last displayed message type. */ size_t linecount; /* 1-N: Output overwrite count. */ size_t lcontinue; /* 1-N: Output line continue value. */ size_t totalcount; /* 1-N: Output overwrite count. */ /* Busy state. */ int busy_ref; /* Busy reference count. */ int busy_ch; /* Busy character. */ size_t busy_fx; /* Busy character x coordinate. */ size_t busy_oldy; /* Saved y coordinate. */ size_t busy_oldx; /* Saved x coordinate. */ struct timeval busy_tv; /* Busy timer. */ char *ps; /* Paragraph plus section list. */ u_long u_ccnt; /* Undo command count. */ CHAR_T lastckey; /* Last search character. */ cdir_t csearchdir; /* Character search direction. */ SMAP *h_smap; /* First slot of the line map. */ SMAP *t_smap; /* Last slot of the line map. */ /* * One extra slot is always allocated for the map so that we can use * it to do vi :colon command input; see v_tcmd(). */ recno_t sv_tm_lno; /* tcmd: saved TMAP lno field. */ size_t sv_tm_coff; /* tcmd: saved TMAP coff field. */ size_t sv_tm_soff; /* tcmd: saved TMAP soff field. */ size_t sv_t_maxrows; /* tcmd: saved t_maxrows. */ size_t sv_t_minrows; /* tcmd: saved t_minrows. */ size_t sv_t_rows; /* tcmd: saved t_rows. */ #define SIZE_HMAP(sp) (VIP(sp)->srows + 1) /* * Macros to get to the head/tail of the smap. If the screen only has * one line, HMAP can be equal to TMAP, so the code has to understand * the off-by-one errors that can result. If stepping through an SMAP * and operating on each entry, use sp->t_rows as the count of slots, * don't use a loop that compares <= TMAP. */ #define _HMAP(sp) (VIP(sp)->h_smap) #define HMAP _HMAP(sp) #define _TMAP(sp) (VIP(sp)->t_smap) #define TMAP _TMAP(sp) recno_t ss_lno; /* 1-N: vi_opt_screens cached line number. */ size_t ss_screens; /* vi_opt_screens cached return value. */ #define VI_SCR_CFLUSH(vip) vip->ss_lno = OOBLNO size_t srows; /* 1-N: rows in the terminal/window. */ recno_t olno; /* 1-N: old cursor file line. */ size_t ocno; /* 0-N: old file cursor column. */ size_t sc_col; /* 0-N: LOGICAL screen column. */ SMAP *sc_smap; /* SMAP entry where sc_col occurs. */ #define VIP_CUR_INVALID 0x0001 /* Cursor position is unknown. */ #define VIP_DIVIDER 0x0002 /* Divider line was displayed. */ #define VIP_N_EX_PAINT 0x0004 /* Clear and repaint when ex finishes. */ #define VIP_N_EX_REDRAW 0x0008 /* Schedule SC_SCR_REDRAW when ex finishes. */ #define VIP_N_REFRESH 0x0010 /* Repaint (from SMAP) on the next refresh. */ #define VIP_N_RENUMBER 0x0020 /* Renumber screen on the next refresh. */ #define VIP_RCM_LAST 0x0040 /* Cursor drawn to the last column. */ #define VIP_S_MODELINE 0x0080 /* Skip next modeline refresh. */ #define VIP_S_REFRESH 0x0100 /* Skip next refresh. */ u_int16_t flags; } VI_PRIVATE; /* Vi private area. */ #define VIP(sp) ((VI_PRIVATE *)((sp)->vi_private)) #define O_NUMBER_FMT "%7lu " /* O_NUMBER format, length. */ #define O_NUMBER_LENGTH 8 #define SCREEN_COLS(sp) /* Screen columns. */ \ ((O_ISSET(sp, O_NUMBER) ? (sp)->cols - O_NUMBER_LENGTH : (sp)->cols)) /* * LASTLINE is the zero-based, last line in the screen. Note that it is correct * regardless of the changes in the screen to permit text input on the last line * of the screen, or the existence of small screens. */ #define LASTLINE(sp) \ ((sp)->t_maxrows < (sp)->rows ? (sp)->t_maxrows : (sp)->rows - 1) /* * Small screen (see vs_refresh.c, section 6a) and one-line screen test. * Note, both cannot be true for the same screen. */ #define IS_SMALL(sp) ((sp)->t_minrows != (sp)->t_maxrows) #define IS_ONELINE(sp) ((sp)->rows == 1) #define HALFTEXT(sp) /* Half text. */ \ ((sp)->t_rows == 1 ? 1 : (sp)->t_rows / 2) #define HALFSCREEN(sp) /* Half text screen. */ \ ((sp)->t_maxrows == 1 ? 1 : (sp)->t_maxrows / 2) /* * Next tab offset. * * !!! * There are problems with how the historical vi handled tabs. For example, * by doing "set ts=3" and building lines that fold, you can get it to step * through tabs as if they were spaces and move inserted characters to new * positions when is entered. I believe that nvi does tabs correctly, * but there are some historical incompatibilities. */ #define TAB_OFF(c) COL_OFF((c), O_VAL(sp, O_TABSTOP)) /* If more than one screen being shown. */ #define IS_SPLIT(sp) \ ((sp)->q.cqe_next != (void *)&(sp)->gp->dq || \ (sp)->q.cqe_prev != (void *)&(sp)->gp->dq) /* Screen adjustment operations. */ typedef enum { A_DECREASE, A_INCREASE, A_SET } adj_t; /* Screen position operations. */ typedef enum { P_BOTTOM, P_FILL, P_MIDDLE, P_TOP } pos_t; /* Scrolling operations. */ typedef enum { CNTRL_B, CNTRL_D, CNTRL_E, CNTRL_F, CNTRL_U, CNTRL_Y, Z_CARAT, Z_PLUS } scroll_t; /* Vi common error messages. */ typedef enum { VIM_COMBUF, VIM_EMPTY, VIM_EOF, VIM_EOL, VIM_NOCOM, VIM_NOCOM_B, VIM_USAGE, VIM_WRESIZE } vim_t; #include "vi_extern.h" vigor-0.016.orig/vi/vs_line.c0100644000076400007640000003360407103707241014516 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)vs_line.c 10.19 (Berkeley) 9/26/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" #ifdef VISIBLE_TAB_CHARS #define TABCH '-' #else #define TABCH ' ' #endif /* * vs_line -- * Update one line on the screen. * * PUBLIC: int vs_line __P((SCR *, SMAP *, size_t *, size_t *)); */ int vs_line(sp, smp, yp, xp) SCR *sp; SMAP *smp; size_t *xp, *yp; { CHAR_T *kp; GS *gp; SMAP *tsmp; size_t chlen, cno_cnt, cols_per_screen, len, nlen; size_t offset_in_char, offset_in_line, oldx, oldy; size_t scno, skip_cols, skip_screens; int ch, dne, is_cached, is_partial, is_tab; int list_tab, list_dollar; char *p, *cbp, *ecbp, cbuf[128]; #if defined(DEBUG) && 0 TRACE(sp, "vs_line: row %u: line: %u off: %u\n", smp - HMAP, smp->lno, smp->off); #endif /* * If ex modifies the screen after ex output is already on the screen, * don't touch it -- we'll get scrolling wrong, at best. */ if (!F_ISSET(sp, SC_TINPUT_INFO) && VIP(sp)->totalcount > 1) return (0); if (F_ISSET(sp, SC_SCR_EXWROTE) && smp - HMAP != LASTLINE(sp)) return (0); /* * Assume that, if the cache entry for the line is filled in, the * line is already on the screen, and all we need to do is return * the cursor position. If the calling routine doesn't need the * cursor position, we can just return. */ is_cached = SMAP_CACHE(smp); if (yp == NULL && is_cached) return (0); /* * A nasty side effect of this routine is that it returns the screen * position for the "current" character. Not pretty, but this is the * only routine that really knows what's out there. * * Move to the line. This routine can be called by vs_sm_position(), * which uses it to fill in the cache entry so it can figure out what * the real contents of the screen are. Because of this, we have to * return to whereever we started from. */ gp = sp->gp; (void)gp->scr_cursor(sp, &oldy, &oldx); (void)gp->scr_move(sp, smp - HMAP, 0); /* Get the line. */ dne = db_get(sp, smp->lno, 0, &p, &len); /* * Special case if we're printing the info/mode line. Skip printing * the leading number, as well as other minor setup. The only time * this code paints the mode line is when the user is entering text * for a ":" command, so we can put the code here instead of dealing * with the empty line logic below. This is a kludge, but it's pretty * much confined to this module. * * Set the number of columns for this screen. * Set the number of chars or screens to skip until a character is to * be displayed. */ cols_per_screen = sp->cols; if (O_ISSET(sp, O_LEFTRIGHT)) { skip_screens = 0; skip_cols = smp->coff; } else { skip_screens = smp->soff - 1; skip_cols = skip_screens * cols_per_screen; } list_tab = O_ISSET(sp, O_LIST); if (F_ISSET(sp, SC_TINPUT_INFO)) list_dollar = 0; else { list_dollar = list_tab; /* * If O_NUMBER is set, the line doesn't exist and it's line * number 1, i.e., an empty file, display the line number. * * If O_NUMBER is set, the line exists and the first character * on the screen is the first character in the line, display * the line number. * * !!! * If O_NUMBER set, decrement the number of columns in the * first screen. DO NOT CHANGE THIS -- IT'S RIGHT! The * rest of the code expects this to reflect the number of * columns in the first screen, regardless of the number of * columns we're going to skip. */ if (O_ISSET(sp, O_NUMBER)) { cols_per_screen -= O_NUMBER_LENGTH; if ((!dne || smp->lno == 1) && skip_cols == 0) { nlen = snprintf(cbuf, sizeof(cbuf), O_NUMBER_FMT, smp->lno); (void)gp->scr_addstr(sp, cbuf, nlen); } } } /* * Special case non-existent lines and the first line of an empty * file. In both cases, the cursor position is 0, but corrected * as necessary for the O_NUMBER field, if it was displayed. */ if (dne || len == 0) { /* Fill in the cursor. */ if (yp != NULL && smp->lno == sp->lno) { *yp = smp - HMAP; *xp = sp->cols - cols_per_screen; } /* If the line is on the screen, quit. */ if (is_cached) goto ret1; /* Set line cache information. */ smp->c_sboff = smp->c_eboff = 0; smp->c_scoff = smp->c_eclen = 0; /* * Lots of special cases for empty lines, but they only apply * if we're displaying the first screen of the line. */ if (skip_cols == 0) if (dne) { if (smp->lno == 1) { if (list_dollar) { ch = '$'; goto empty; } } else { ch = '~'; goto empty; } } else if (list_dollar) { ch = '$'; empty: (void)gp->scr_addstr(sp, KEY_NAME(sp, ch), KEY_LEN(sp, ch)); } (void)gp->scr_clrtoeol(sp); (void)gp->scr_move(sp, oldy, oldx); return (0); } /* * If we just wrote this or a previous line, we cached the starting * and ending positions of that line. The way it works is we keep * information about the lines displayed in the SMAP. If we're * painting the screen in the forward direction, this saves us from * reformatting the physical line for every line on the screen. This * wins big on binary files with 10K lines. * * Test for the first screen of the line, then the current screen line, * then the line behind us, then do the hard work. Note, it doesn't * do us any good to have a line in front of us -- it would be really * hard to try and figure out tabs in the reverse direction, i.e. how * many spaces a tab takes up in the reverse direction depends on * what characters preceded it. * * Test for the first screen of the line. */ if (skip_cols == 0) { smp->c_sboff = offset_in_line = 0; smp->c_scoff = offset_in_char = 0; p = &p[offset_in_line]; goto display; } /* Test to see if we've seen this exact line before. */ if (is_cached) { offset_in_line = smp->c_sboff; offset_in_char = smp->c_scoff; p = &p[offset_in_line]; /* Set cols_per_screen to 2nd and later line length. */ if (O_ISSET(sp, O_LEFTRIGHT) || skip_cols > cols_per_screen) cols_per_screen = sp->cols; goto display; } /* Test to see if we saw an earlier part of this line before. */ if (smp != HMAP && SMAP_CACHE(tsmp = smp - 1) && tsmp->lno == smp->lno) { if (tsmp->c_eclen != tsmp->c_ecsize) { offset_in_line = tsmp->c_eboff; offset_in_char = tsmp->c_eclen; } else { offset_in_line = tsmp->c_eboff + 1; offset_in_char = 0; } /* Put starting info for this line in the cache. */ smp->c_sboff = offset_in_line; smp->c_scoff = offset_in_char; p = &p[offset_in_line]; /* Set cols_per_screen to 2nd and later line length. */ if (O_ISSET(sp, O_LEFTRIGHT) || skip_cols > cols_per_screen) cols_per_screen = sp->cols; goto display; } scno = 0; offset_in_line = 0; offset_in_char = 0; /* Do it the hard way, for leftright scrolling screens. */ if (O_ISSET(sp, O_LEFTRIGHT)) { for (; offset_in_line < len; ++offset_in_line) { chlen = (ch = *(u_char *)p++) == '\t' && !list_tab ? TAB_OFF(scno) : KEY_LEN(sp, ch); if ((scno += chlen) >= skip_cols) break; } /* Set cols_per_screen to 2nd and later line length. */ cols_per_screen = sp->cols; /* Put starting info for this line in the cache. */ if (scno != skip_cols) { smp->c_sboff = offset_in_line; smp->c_scoff = offset_in_char = chlen - (scno - skip_cols); --p; } else { smp->c_sboff = ++offset_in_line; smp->c_scoff = 0; } } /* Do it the hard way, for historic line-folding screens. */ else { for (; offset_in_line < len; ++offset_in_line) { chlen = (ch = *(u_char *)p++) == '\t' && !list_tab ? TAB_OFF(scno) : KEY_LEN(sp, ch); if ((scno += chlen) < cols_per_screen) continue; scno -= cols_per_screen; /* Set cols_per_screen to 2nd and later line length. */ cols_per_screen = sp->cols; /* * If crossed the last skipped screen boundary, start * displaying the characters. */ if (--skip_screens == 0) break; } /* Put starting info for this line in the cache. */ if (scno != 0) { smp->c_sboff = offset_in_line; smp->c_scoff = offset_in_char = chlen - scno; --p; } else { smp->c_sboff = ++offset_in_line; smp->c_scoff = 0; } } display: /* * Set the number of characters to skip before reaching the cursor * character. Offset by 1 and use 0 as a flag value. Vs_line is * called repeatedly with a valid pointer to a cursor position. * Don't fill anything in unless it's the right line and the right * character, and the right part of the character... */ if (yp == NULL || smp->lno != sp->lno || sp->cno < offset_in_line || offset_in_line + cols_per_screen < sp->cno) { cno_cnt = 0; /* If the line is on the screen, quit. */ if (is_cached) goto ret1; } else cno_cnt = (sp->cno - offset_in_line) + 1; /* This is the loop that actually displays characters. */ ecbp = (cbp = cbuf) + sizeof(cbuf) - 1; for (is_partial = 0, scno = 0; offset_in_line < len; ++offset_in_line, offset_in_char = 0) { if ((ch = *(u_char *)p++) == '\t' && !list_tab) { scno += chlen = TAB_OFF(scno) - offset_in_char; is_tab = 1; } else { scno += chlen = KEY_LEN(sp, ch) - offset_in_char; is_tab = 0; } /* * Only display up to the right-hand column. Set a flag if * the entire character wasn't displayed for use in setting * the cursor. If reached the end of the line, set the cache * info for the screen. Don't worry about there not being * characters to display on the next screen, its lno/off won't * match up in that case. */ if (scno >= cols_per_screen) { if (is_tab == 1) { chlen -= scno - cols_per_screen; smp->c_ecsize = smp->c_eclen = chlen; scno = cols_per_screen; } else { smp->c_ecsize = chlen; chlen -= scno - cols_per_screen; smp->c_eclen = chlen; if (scno > cols_per_screen) is_partial = 1; } smp->c_eboff = offset_in_line; /* Terminate the loop. */ offset_in_line = len; } /* * If the caller wants the cursor value, and this was the * cursor character, set the value. There are two ways to * put the cursor on a character -- if it's normal display * mode, it goes on the last column of the character. If * it's input mode, it goes on the first. In normal mode, * set the cursor only if the entire character was displayed. */ if (cno_cnt && --cno_cnt == 0 && (F_ISSET(sp, SC_TINPUT) || !is_partial)) { *yp = smp - HMAP; if (F_ISSET(sp, SC_TINPUT)) *xp = scno - chlen; else *xp = scno - 1; if (O_ISSET(sp, O_NUMBER) && !F_ISSET(sp, SC_TINPUT_INFO) && skip_cols == 0) *xp += O_NUMBER_LENGTH; /* If the line is on the screen, quit. */ if (is_cached) goto ret1; } /* If the line is on the screen, don't display anything. */ if (is_cached) continue; #define FLUSH { \ *cbp = '\0'; \ (void)gp->scr_addstr(sp, cbuf, cbp - cbuf); \ cbp = cbuf; \ } /* * Display the character. We do tab expansion here because * the screen interface doesn't have any way to set the tab * length. Note, it's theoretically possible for chlen to * be larger than cbuf, if the user set a impossibly large * tabstop. */ if (is_tab) while (chlen--) { if (cbp >= ecbp) FLUSH; *cbp++ = TABCH; } else { if (cbp + chlen >= ecbp) FLUSH; for (kp = KEY_NAME(sp, ch) + offset_in_char; chlen--;) *cbp++ = *kp++; } } if (scno < cols_per_screen) { /* If didn't paint the whole line, update the cache. */ smp->c_ecsize = smp->c_eclen = KEY_LEN(sp, ch); smp->c_eboff = len - 1; /* * If not the info/mode line, and O_LIST set, and at the * end of the line, and the line ended on this screen, * add a trailing $. */ if (list_dollar) { ++scno; chlen = KEY_LEN(sp, '$'); if (cbp + chlen >= ecbp) FLUSH; for (kp = KEY_NAME(sp, '$'); chlen--;) *cbp++ = *kp++; } /* If still didn't paint the whole line, clear the rest. */ if (scno < cols_per_screen) (void)gp->scr_clrtoeol(sp); } /* Flush any buffered characters. */ if (cbp > cbuf) FLUSH; ret1: (void)gp->scr_move(sp, oldy, oldx); return (0); } /* * vs_number -- * Repaint the numbers on all the lines. * * PUBLIC: int vs_number __P((SCR *)); */ int vs_number(sp) SCR *sp; { GS *gp; SMAP *smp; VI_PRIVATE *vip; size_t len, oldy, oldx; int exist; char nbuf[10]; gp = sp->gp; vip = VIP(sp); /* No reason to do anything if we're in input mode on the info line. */ if (F_ISSET(sp, SC_TINPUT_INFO)) return (0); /* * Try and avoid getting the last line in the file, by getting the * line after the last line in the screen -- if it exists, we know * we have to to number all the lines in the screen. Get the one * after the last instead of the last, so that the info line doesn't * fool us. (The problem is that file_lline will lie, and tell us * that the info line is the last line in the file.) If that test * fails, we have to check each line for existence. */ exist = db_exist(sp, TMAP->lno + 1); (void)gp->scr_cursor(sp, &oldy, &oldx); for (smp = HMAP; smp <= TMAP; ++smp) { /* Numbers are only displayed for the first screen line. */ if (O_ISSET(sp, O_LEFTRIGHT)) { if (smp->coff != 0) continue; } else if (smp->soff != 1) continue; /* * The first line of an empty file gets numbered, otherwise * number any existing line. */ if (smp->lno != 1 && !exist && !db_exist(sp, smp->lno)) break; (void)gp->scr_move(sp, smp - HMAP, 0); len = snprintf(nbuf, sizeof(nbuf), O_NUMBER_FMT, smp->lno); (void)gp->scr_addstr(sp, nbuf, len); } (void)gp->scr_move(sp, oldy, oldx); return (0); } vigor-0.016.orig/vi/vs_msg.c0100644000076400007640000005363607103707241014364 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)vs_msg.c 10.77 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" typedef enum { SCROLL_W, /* User wait. */ SCROLL_W_EX, /* User wait, or enter : to continue. */ SCROLL_W_QUIT /* User wait, or enter q to quit. */ /* * SCROLL_W_QUIT has another semantic * -- only wait if the screen is full */ } sw_t; static void vs_divider __P((SCR *)); static void vs_msgsave __P((SCR *, mtype_t, char *, size_t)); static void vs_output __P((SCR *, mtype_t, const char *, int)); static void vs_scroll __P((SCR *, int *, sw_t)); static void vs_wait __P((SCR *, int *, sw_t)); /* * vs_busy -- * Display, update or clear a busy message. * * This routine is the default editor interface for vi busy messages. It * implements a standard strategy of stealing lines from the bottom of the * vi text screen. Screens using an alternate method of displaying busy * messages, e.g. X11 clock icons, should set their scr_busy function to the * correct function before calling the main editor routine. * * PUBLIC: void vs_busy __P((SCR *, const char *, busy_t)); */ void vs_busy(sp, msg, btype) SCR *sp; const char *msg; busy_t btype; { GS *gp; VI_PRIVATE *vip; static const char flagc[] = "|/-\\"; struct timeval tv; size_t len, notused; const char *p; /* Ex doesn't display busy messages. */ if (F_ISSET(sp, SC_EX | SC_SCR_EXWROTE)) return; gp = sp->gp; vip = VIP(sp); /* * Most of this routine is to deal with the screen sharing real estate * between the normal edit messages and the busy messages. Logically, * all that's needed is something that puts up a message, periodically * updates it, and then goes away. */ switch (btype) { case BUSY_ON: ++vip->busy_ref; if (vip->totalcount != 0 || vip->busy_ref != 1) break; /* Initialize state for updates. */ vip->busy_ch = 0; (void)gettimeofday(&vip->busy_tv, NULL); /* Save the current cursor. */ (void)gp->scr_cursor(sp, &vip->busy_oldy, &vip->busy_oldx); /* Display the busy message. */ p = msg_cat(sp, msg, &len); (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_addstr(sp, p, len); (void)gp->scr_cursor(sp, ¬used, &vip->busy_fx); (void)gp->scr_clrtoeol(sp); (void)gp->scr_move(sp, LASTLINE(sp), vip->busy_fx); break; case BUSY_OFF: if (vip->busy_ref == 0) break; --vip->busy_ref; /* * If the line isn't in use for another purpose, clear it. * Always return to the original position. */ if (vip->totalcount == 0 && vip->busy_ref == 0) { (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_clrtoeol(sp); } (void)gp->scr_move(sp, vip->busy_oldy, vip->busy_oldx); break; case BUSY_UPDATE: if (vip->totalcount != 0 || vip->busy_ref == 0) break; /* Update no more than every 1/8 of a second. */ (void)gettimeofday(&tv, NULL); if (((tv.tv_sec - vip->busy_tv.tv_sec) * 1000000 + (tv.tv_usec - vip->busy_tv.tv_usec)) < 125000) return; vip->busy_tv = tv; /* Display the update. */ if (vip->busy_ch == sizeof(flagc) - 1) vip->busy_ch = 0; (void)gp->scr_move(sp, LASTLINE(sp), vip->busy_fx); (void)gp->scr_addstr(sp, flagc + vip->busy_ch++, 1); (void)gp->scr_move(sp, LASTLINE(sp), vip->busy_fx); break; } (void)gp->scr_refresh(sp, 0); } /* * vs_home -- * Home the cursor to the bottom row, left-most column. * * PUBLIC: void vs_home __P((SCR *)); */ void vs_home(sp) SCR *sp; { (void)sp->gp->scr_move(sp, LASTLINE(sp), 0); (void)sp->gp->scr_refresh(sp, 0); } /* * vs_update -- * Update a command. * * PUBLIC: void vs_update __P((SCR *, const char *, const char *)); */ void vs_update(sp, m1, m2) SCR *sp; const char *m1, *m2; { GS *gp; size_t len, mlen, oldx, oldy; gp = sp->gp; /* * This routine displays a message on the bottom line of the screen, * without updating any of the command structures that would keep it * there for any period of time, i.e. it is overwritten immediately. * * It's used by the ex read and ! commands when the user's command is * expanded, and by the ex substitution confirmation prompt. */ if (F_ISSET(sp, SC_SCR_EXWROTE)) { (void)ex_printf(sp, "%s\n", m1 == NULL? "" : m1, m2 == NULL ? "" : m2); (void)ex_fflush(sp); } /* * Save the cursor position, the substitute-with-confirmation code * will have already set it correctly. */ (void)gp->scr_cursor(sp, &oldy, &oldx); /* Clear the bottom line. */ (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_clrtoeol(sp); /* * XXX * Don't let long file names screw up the screen. */ if (m1 != NULL) { mlen = len = strlen(m1); if (len > sp->cols - 2) mlen = len = sp->cols - 2; (void)gp->scr_addstr(sp, m1, mlen); } else len = 0; if (m2 != NULL) { mlen = strlen(m2); if (len + mlen > sp->cols - 2) mlen = (sp->cols - 2) - len; (void)gp->scr_addstr(sp, m2, mlen); } (void)gp->scr_move(sp, oldy, oldx); (void)gp->scr_refresh(sp, 0); } /* * vs_msg -- * Display ex output or error messages for the screen. * * This routine is the default editor interface for all ex output, and all ex * and vi error/informational messages. It implements the standard strategy * of stealing lines from the bottom of the vi text screen. Screens using an * alternate method of displaying messages, e.g. dialog boxes, should set their * scr_msg function to the correct function before calling the editor. * * PUBLIC: void vs_msg __P((SCR *, mtype_t, char *, size_t)); */ void vs_msg(sp, mtype, line, len) SCR *sp; mtype_t mtype; char *line; size_t len; { GS *gp; VI_PRIVATE *vip; size_t maxcols, oldx, oldy, padding; const char *e, *s, *t; gp = sp->gp; vip = VIP(sp); /* * Ring the bell if it's scheduled. * * XXX * Shouldn't we save this, too? */ if (F_ISSET(sp, SC_TINPUT_INFO) || F_ISSET(gp, G_BELLSCHED)) if (F_ISSET(sp, SC_SCR_VI)) { F_CLR(gp, G_BELLSCHED); (void)gp->scr_bell(sp); } else F_SET(gp, G_BELLSCHED); /* * If vi is using the error line for text input, there's no screen * real-estate for the error message. Nothing to do without some * information as to how important the error message is. */ if (F_ISSET(sp, SC_TINPUT_INFO)) return; /* * Ex or ex controlled screen output. * * If output happens during startup, e.g., a .exrc file, we may be * in ex mode but haven't initialized the screen. Initialize here, * and in this case, stay in ex mode. * * If the SC_SCR_EXWROTE bit is set, then we're switching back and * forth between ex and vi, but the screen is trashed and we have * to respect that. Switch to ex mode long enough to put out the * message. * * If the SC_EX_WAIT_NO bit is set, turn it off -- we're writing to * the screen, so previous opinions are ignored. */ if (F_ISSET(sp, SC_EX | SC_SCR_EXWROTE)) { if (!F_ISSET(sp, SC_SCR_EX)) if (F_ISSET(sp, SC_SCR_EXWROTE)) { if (sp->gp->scr_screen(sp, SC_EX)) return; } else if (ex_init(sp)) return; if (mtype == M_ERR) (void)gp->scr_attr(sp, SA_INVERSE, 1); (void)printf("%.*s", (int)len, line); if (mtype == M_ERR) (void)gp->scr_attr(sp, SA_INVERSE, 0); (void)fflush(stdout); F_CLR(sp, SC_EX_WAIT_NO); if (!F_ISSET(sp, SC_SCR_EX)) (void)sp->gp->scr_screen(sp, SC_VI); return; } /* If the vi screen isn't ready, save the message. */ if (!F_ISSET(sp, SC_SCR_VI)) { (void)vs_msgsave(sp, mtype, line, len); return; } /* Save the cursor position. */ (void)gp->scr_cursor(sp, &oldy, &oldx); /* If it's an ex output message, just write it out. */ if (mtype == M_NONE) { vs_output(sp, mtype, line, len); goto ret; } /* * If it's a vi message, strip the trailing so we can * try and paste messages together. */ if (line[len - 1] == '\n') --len; /* * If a message won't fit on a single line, try to split on a . * If a subsequent message fits on the same line, write a separator * and output it. Otherwise, put out a newline. * * Need up to two padding characters normally; a semi-colon and a * separating space. If only a single line on the screen, add some * more for the trailing continuation message. * * XXX * Assume that periods and semi-colons take up a single column on the * screen. * * XXX * There are almost certainly pathological cases that will break this * code. */ if (IS_ONELINE(sp)) (void)msg_cmsg(sp, CMSG_CONT_S, &padding); else padding = 0; padding += 2; maxcols = sp->cols - 1; if (vip->lcontinue != 0) if (len + vip->lcontinue + padding > maxcols) vs_output(sp, vip->mtype, ".\n", 2); else { vs_output(sp, vip->mtype, ";", 1); vs_output(sp, M_NONE, " ", 1); } vip->mtype = mtype; for (s = line;; s = t) { for (; len > 0 && isblank(*s); --len, ++s); if (len == 0) break; if (len + vip->lcontinue > maxcols) { for (e = s + (maxcols - vip->lcontinue); e > s && !isblank(*e); --e); if (e == s) e = t = s + (maxcols - vip->lcontinue); else for (t = e; isblank(e[-1]); --e); } else e = t = s + len; /* * If the message ends in a period, discard it, we want to * gang messages where possible. */ len -= t - s; if (len == 0 && (e - s) > 1 && s[(e - s) - 1] == '.') --e; vs_output(sp, mtype, s, e - s); if (len != 0) vs_output(sp, M_NONE, "\n", 1); if (INTERRUPTED(sp)) break; } ret: (void)gp->scr_move(sp, oldy, oldx); (void)gp->scr_refresh(sp, 0); } /* * vs_output -- * Output the text to the screen. */ static void vs_output(sp, mtype, line, llen) SCR *sp; mtype_t mtype; const char *line; int llen; { CHAR_T *kp; GS *gp; VI_PRIVATE *vip; size_t chlen, notused; int ch, len, rlen, tlen; const char *p, *t; char *cbp, *ecbp, cbuf[128]; gp = sp->gp; vip = VIP(sp); for (p = line, rlen = llen; llen > 0;) { /* Get the next physical line. */ if ((p = memchr(line, '\n', llen)) == NULL) len = llen; else len = p - line; /* * The max is sp->cols characters, and we may have already * written part of the line. */ if (len + vip->lcontinue > sp->cols) len = sp->cols - vip->lcontinue; /* * If the first line output, do nothing. If the second line * output, draw the divider line. If drew a full screen, we * remove the divider line. If it's a continuation line, move * to the continuation point, else, move the screen up. */ if (vip->lcontinue == 0) { if (!IS_ONELINE(sp)) { if (vip->totalcount == 1) { (void)gp->scr_move(sp, LASTLINE(sp) - 1, 0); (void)gp->scr_clrtoeol(sp); (void)vs_divider(sp); F_SET(vip, VIP_DIVIDER); ++vip->totalcount; ++vip->linecount; } if (vip->totalcount == sp->t_maxrows && F_ISSET(vip, VIP_DIVIDER)) { --vip->totalcount; --vip->linecount; F_CLR(vip, VIP_DIVIDER); } } if (vip->totalcount != 0) vs_scroll(sp, NULL, SCROLL_W_QUIT); (void)gp->scr_move(sp, LASTLINE(sp), 0); ++vip->totalcount; ++vip->linecount; if (INTERRUPTED(sp)) break; } else (void)gp->scr_move(sp, LASTLINE(sp), vip->lcontinue); /* Error messages are in inverse video. */ if (mtype == M_ERR) (void)gp->scr_attr(sp, SA_INVERSE, 1); /* Display the line, doing character translation. */ #define FLUSH { \ *cbp = '\0'; \ (void)gp->scr_addstr(sp, cbuf, cbp - cbuf); \ cbp = cbuf; \ } ecbp = (cbp = cbuf) + sizeof(cbuf) - 1; for (t = line, tlen = len; tlen--; ++t) { ch = *t; /* * Replace tabs with spaces, there are places in * ex that do column calculations without looking * at -- and all routines that care about * do their own expansions. This catches * in things like tag search strings. */ if (ch == '\t') ch = ' '; chlen = KEY_LEN(sp, ch); if (cbp + chlen >= ecbp) FLUSH; for (kp = KEY_NAME(sp, ch); chlen--;) *cbp++ = *kp++; } if (cbp > cbuf) FLUSH; if (mtype == M_ERR) (void)gp->scr_attr(sp, SA_INVERSE, 0); /* Clear the rest of the line. */ (void)gp->scr_clrtoeol(sp); /* If we loop, it's a new line. */ vip->lcontinue = 0; /* Reset for the next line. */ line += len; llen -= len; if (p != NULL) { ++line; --llen; } } /* Set up next continuation line. */ if (p == NULL) gp->scr_cursor(sp, ¬used, &vip->lcontinue); } /* * vs_ex_resolve -- * Deal with ex message output. * * This routine is called when exiting a colon command to resolve any ex * output that may have occurred. * * PUBLIC: int vs_ex_resolve __P((SCR *, int *)); */ int vs_ex_resolve(sp, continuep) SCR *sp; int *continuep; { EVENT ev; GS *gp; VI_PRIVATE *vip; sw_t wtype; gp = sp->gp; vip = VIP(sp); *continuep = 0; /* If we ran any ex command, we can't trust the cursor position. */ F_SET(vip, VIP_CUR_INVALID); /* Terminate any partially written message. */ if (vip->lcontinue != 0) { vs_output(sp, vip->mtype, ".", 1); vip->lcontinue = 0; vip->mtype = M_NONE; } /* * If we switched out of the vi screen into ex, switch back while we * figure out what to do with the screen and potentially get another * command to execute. * * If we didn't switch into ex, we're not required to wait, and less * than 2 lines of output, we can continue without waiting for the * wait. * * Note, all other code paths require waiting, so we leave the report * of modified lines until later, so that we won't wait for no other * reason than a threshold number of lines were modified. This means * we display cumulative line modification reports for groups of ex * commands. That seems right to me (well, at least not wrong). */ if (F_ISSET(sp, SC_SCR_EXWROTE)) { if (sp->gp->scr_screen(sp, SC_VI)) return (1); } else if (!F_ISSET(sp, SC_EX_WAIT_YES) && vip->totalcount < 2) { F_CLR(sp, SC_EX_WAIT_NO); return (0); } /* Clear the required wait flag, it's no longer needed. */ F_CLR(sp, SC_EX_WAIT_YES); /* * Wait, unless explicitly told not to wait or the user interrupted * the command. If the user is leaving the screen, for any reason, * they can't continue with further ex commands. */ if (!F_ISSET(sp, SC_EX_WAIT_NO) && !INTERRUPTED(sp)) { wtype = F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE | SC_FSWITCH | SC_SSWITCH) ? SCROLL_W : SCROLL_W_EX; if (F_ISSET(sp, SC_SCR_EXWROTE)) vs_wait(sp, continuep, wtype); else vs_scroll(sp, continuep, wtype); if (*continuep) return (0); } /* If ex wrote on the screen, refresh the screen image. */ if (F_ISSET(sp, SC_SCR_EXWROTE)) F_SET(vip, VIP_N_EX_PAINT); /* * If we're not the bottom of the split screen stack, the screen * image itself is wrong, so redraw everything. */ if (sp->q.cqe_next != (void *)&sp->gp->dq) F_SET(sp, SC_SCR_REDRAW); /* If ex changed the underlying file, the map itself is wrong. */ if (F_ISSET(vip, VIP_N_EX_REDRAW)) F_SET(sp, SC_SCR_REFORMAT); /* Ex may have switched out of the alternate screen, return. */ (void)gp->scr_attr(sp, SA_ALTERNATE, 1); /* * Whew. We're finally back home, after what feels like years. * Kiss the ground. */ F_CLR(sp, SC_SCR_EXWROTE | SC_EX_WAIT_NO); /* * We may need to repaint some of the screen, e.g.: * * :set * :!ls * * gives us a combination of some lines that are "wrong", and a need * for a full refresh. */ if (vip->totalcount > 1) { /* Set up the redraw of the overwritten lines. */ ev.e_event = E_REPAINT; ev.e_flno = vip->totalcount >= sp->rows ? 1 : sp->rows - vip->totalcount; ev.e_tlno = sp->rows; /* Reset the count of overwriting lines. */ vip->linecount = vip->lcontinue = vip->totalcount = 0; /* Redraw. */ (void)vs_repaint(sp, &ev); } else /* Reset the count of overwriting lines. */ vip->linecount = vip->lcontinue = vip->totalcount = 0; return (0); } /* * vs_resolve -- * Deal with message output. * * PUBLIC: int vs_resolve __P((SCR *, SCR *, int)); */ int vs_resolve(sp, csp, forcewait) SCR *sp, *csp; int forcewait; { EVENT ev; GS *gp; MSGS *mp; VI_PRIVATE *vip; size_t oldy, oldx; int redraw; /* * Vs_resolve is called from the main vi loop and the refresh function * to periodically ensure that the user has seen any messages that have * been displayed and that any status lines are correct. The sp screen * is the screen we're checking, usually the current screen. When it's * not, csp is the current screen, used for final cursor positioning. */ gp = sp->gp; vip = VIP(sp); if (csp == NULL) csp = sp; /* Save the cursor position. */ (void)gp->scr_cursor(csp, &oldy, &oldx); /* Ring the bell if it's scheduled. */ if (F_ISSET(gp, G_BELLSCHED)) { F_CLR(gp, G_BELLSCHED); (void)gp->scr_bell(sp); } /* Display new file status line. */ if (F_ISSET(sp, SC_STATUS)) { F_CLR(sp, SC_STATUS); msgq_status(sp, sp->lno, MSTAT_TRUNCATE); } /* Report on line modifications. */ mod_rpt(sp); /* * Flush any saved messages. If the screen isn't ready, refresh * it. (A side-effect of screen refresh is that we can display * messages.) Once this is done, don't trust the cursor. That * extra refresh screwed the pooch. */ if (gp->msgq.lh_first != NULL) { if (!F_ISSET(sp, SC_SCR_VI) && vs_refresh(sp, 1)) return (1); while ((mp = gp->msgq.lh_first) != NULL) { gp->scr_msg(sp, mp->mtype, mp->buf, mp->len); LIST_REMOVE(mp, q); free(mp->buf); free(mp); } F_SET(vip, VIP_CUR_INVALID); } switch (vip->totalcount) { case 0: redraw = 0; break; case 1: /* * If we're switching screens, we have to wait for messages, * regardless. If we don't wait, skip updating the modeline. */ if (forcewait) vs_scroll(sp, NULL, SCROLL_W); else F_SET(vip, VIP_S_MODELINE); redraw = 0; break; default: /* * If >1 message line in use, prompt the user to continue and * repaint overwritten lines. */ vs_scroll(sp, NULL, SCROLL_W); ev.e_event = E_REPAINT; ev.e_flno = vip->totalcount >= sp->rows ? 1 : sp->rows - vip->totalcount; ev.e_tlno = sp->rows; redraw = 1; break; } /* Reset the count of overwriting lines. */ vip->linecount = vip->lcontinue = vip->totalcount = 0; /* Redraw. */ if (redraw) (void)vs_repaint(sp, &ev); /* Restore the cursor position. */ (void)gp->scr_move(csp, oldy, oldx); return (0); } /* * vs_scroll -- * Scroll the screen for output. */ static void vs_scroll(sp, continuep, wtype) SCR *sp; int *continuep; sw_t wtype; { GS *gp; VI_PRIVATE *vip; gp = sp->gp; vip = VIP(sp); if (!IS_ONELINE(sp)) { /* * Scroll the screen. Instead of scrolling the entire screen, * delete the line above the first line output so preserve the * maximum amount of the screen. */ (void)gp->scr_move(sp, vip->totalcount < sp->rows ? LASTLINE(sp) - vip->totalcount : 0, 0); (void)gp->scr_deleteln(sp); /* If there are screens below us, push them back into place. */ if (sp->q.cqe_next != (void *)&sp->gp->dq) { (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_insertln(sp); } } if (wtype == SCROLL_W_QUIT && vip->linecount < sp->t_maxrows) return; vs_wait(sp, continuep, wtype); } /* * vs_wait -- * Prompt the user to continue. */ static void vs_wait(sp, continuep, wtype) SCR *sp; int *continuep; sw_t wtype; { EVENT ev; VI_PRIVATE *vip; const char *p; GS *gp; size_t len; gp = sp->gp; vip = VIP(sp); (void)gp->scr_move(sp, LASTLINE(sp), 0); if (IS_ONELINE(sp)) p = msg_cmsg(sp, CMSG_CONT_S, &len); else switch (wtype) { case SCROLL_W_QUIT: p = msg_cmsg(sp, CMSG_CONT_Q, &len); break; case SCROLL_W_EX: p = msg_cmsg(sp, CMSG_CONT_EX, &len); break; case SCROLL_W: p = msg_cmsg(sp, CMSG_CONT, &len); break; default: abort(); /* NOTREACHED */ } (void)gp->scr_addstr(sp, p, len); ++vip->totalcount; vip->linecount = 0; (void)gp->scr_clrtoeol(sp); (void)gp->scr_refresh(sp, 0); /* Get a single character from the terminal. */ if (continuep != NULL) *continuep = 0; for (;;) { if (v_event_get(sp, &ev, 0, 0)) return; if (ev.e_event == E_CHARACTER) break; if (ev.e_event == E_INTERRUPT) { ev.e_c = CH_QUIT; F_SET(gp, G_INTERRUPTED); break; } (void)gp->scr_bell(sp); } switch (wtype) { case SCROLL_W_QUIT: if (ev.e_c == CH_QUIT) F_SET(gp, G_INTERRUPTED); break; case SCROLL_W_EX: if (ev.e_c == ':' && continuep != NULL) *continuep = 1; break; case SCROLL_W: break; } } /* * vs_divider -- * Draw a dividing line between the screen and the output. */ static void vs_divider(sp) SCR *sp; { GS *gp; size_t len; #define DIVIDESTR "+=+=+=+=+=+=+=+" len = sizeof(DIVIDESTR) - 1 > sp->cols ? sp->cols : sizeof(DIVIDESTR) - 1; gp = sp->gp; (void)gp->scr_attr(sp, SA_INVERSE, 1); (void)gp->scr_addstr(sp, DIVIDESTR, len); (void)gp->scr_attr(sp, SA_INVERSE, 0); } /* * vs_msgsave -- * Save a message for later display. */ static void vs_msgsave(sp, mt, p, len) SCR *sp; mtype_t mt; char *p; size_t len; { GS *gp; MSGS *mp_c, *mp_n; /* * We have to handle messages before we have any place to put them. * If there's no screen support yet, allocate a msg structure, copy * in the message, and queue it on the global structure. If we can't * allocate memory here, we're genuinely screwed, dump the message * to stderr in the (probably) vain hope that someone will see it. */ CALLOC_GOTO(sp, mp_n, MSGS *, 1, sizeof(MSGS)); MALLOC_GOTO(sp, mp_n->buf, char *, len); memmove(mp_n->buf, p, len); mp_n->len = len; mp_n->mtype = mt; gp = sp->gp; if ((mp_c = gp->msgq.lh_first) == NULL) { LIST_INSERT_HEAD(&gp->msgq, mp_n, q); } else { for (; mp_c->q.le_next != NULL; mp_c = mp_c->q.le_next); LIST_INSERT_AFTER(mp_c, mp_n, q); } return; alloc_err: if (mp_n != NULL) free(mp_n); (void)fprintf(stderr, "%.*s\n", (int)len, p); } vigor-0.016.orig/vi/vs_refresh.c0100644000076400007640000005740107103707241015226 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)vs_refresh.c 10.44 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" #define UPDATE_CURSOR 0x01 /* Update the cursor. */ #define UPDATE_SCREEN 0x02 /* Flush to screen. */ static void vs_modeline __P((SCR *)); static int vs_paint __P((SCR *, u_int)); /* * v_repaint -- * Repaint selected lines from the screen. * * PUBLIC: int vs_repaint __P((SCR *, EVENT *)); */ int vs_repaint(sp, evp) SCR *sp; EVENT *evp; { SMAP *smp; for (; evp->e_flno <= evp->e_tlno; ++evp->e_flno) { smp = HMAP + evp->e_flno - 1; SMAP_FLUSH(smp); if (vs_line(sp, smp, NULL, NULL)) return (1); } return (0); } /* * vs_refresh -- * Refresh all screens. * * PUBLIC: int vs_refresh __P((SCR *, int)); */ int vs_refresh(sp, forcepaint) SCR *sp; int forcepaint; { GS *gp; SCR *tsp; int need_refresh; u_int priv_paint, pub_paint; gp = sp->gp; /* * 1: Refresh the screen. * * If SC_SCR_REDRAW is set in the current screen, repaint everything * that we can find, including status lines. */ if (F_ISSET(sp, SC_SCR_REDRAW)) for (tsp = gp->dq.cqh_first; tsp != (void *)&gp->dq; tsp = tsp->q.cqe_next) if (tsp != sp) F_SET(tsp, SC_SCR_REDRAW | SC_STATUS); /* * 2: Related or dirtied screens, or screens with messages. * * If related screens share a view into a file, they may have been * modified as well. Refresh any screens that aren't exiting that * have paint or dirty bits set. Always update their screens, we * are not likely to get another chance. Finally, if we refresh any * screens other than the current one, the cursor will be trashed. */ pub_paint = SC_SCR_REFORMAT | SC_SCR_REDRAW; priv_paint = VIP_CUR_INVALID | VIP_N_REFRESH; if (O_ISSET(sp, O_NUMBER)) priv_paint |= VIP_N_RENUMBER; for (tsp = gp->dq.cqh_first; tsp != (void *)&gp->dq; tsp = tsp->q.cqe_next) if (tsp != sp && !F_ISSET(tsp, SC_EXIT | SC_EXIT_FORCE) && (F_ISSET(tsp, pub_paint) || F_ISSET(VIP(tsp), priv_paint))) { (void)vs_paint(tsp, (F_ISSET(VIP(tsp), VIP_CUR_INVALID) ? UPDATE_CURSOR : 0) | UPDATE_SCREEN); F_SET(VIP(sp), VIP_CUR_INVALID); } /* * 3: Refresh the current screen. * * Always refresh the current screen, it may be a cursor movement. * Also, always do it last -- that way, SC_SCR_REDRAW can be set * in the current screen only, and the screen won't flash. */ if (vs_paint(sp, UPDATE_CURSOR | (!forcepaint && F_ISSET(sp, SC_SCR_VI) && KEYS_WAITING(sp) ? 0 : UPDATE_SCREEN))) return (1); /* * 4: Paint any missing status lines. * * XXX * This is fairly evil. Status lines are written using the vi message * mechanism, since we have no idea how long they are. Since we may be * painting screens other than the current one, we don't want to make * the user wait. We depend heavily on there not being any other lines * currently waiting to be displayed and the message truncation code in * the msgq_status routine working. * * And, finally, if we updated any status lines, make sure the cursor * gets back to where it belongs. */ for (need_refresh = 0, tsp = gp->dq.cqh_first; tsp != (void *)&gp->dq; tsp = tsp->q.cqe_next) if (F_ISSET(tsp, SC_STATUS)) { need_refresh = 1; vs_resolve(tsp, sp, 0); } if (need_refresh) (void)gp->scr_refresh(sp, 0); /* * A side-effect of refreshing the screen is that it's now ready * for everything else, i.e. messages. */ F_SET(sp, SC_SCR_VI); return (0); } /* * vs_paint -- * This is the guts of the vi curses screen code. The idea is that * the SCR structure passed in contains the new coordinates of the * screen. What makes this hard is that we don't know how big * characters are, doing input can put the cursor in illegal places, * and we're frantically trying to avoid repainting unless it's * absolutely necessary. If you change this code, you'd better know * what you're doing. It's subtle and quick to anger. */ static int vs_paint(sp, flags) SCR *sp; u_int flags; { GS *gp; SMAP *smp, tmp; VI_PRIVATE *vip; recno_t lastline, lcnt; size_t cwtotal, cnt, len, notused, off, y; int ch, didpaint, isempty, leftright_warp; char *p; #define LNO sp->lno /* Current file line. */ #define OLNO vip->olno /* Remembered file line. */ #define CNO sp->cno /* Current file column. */ #define OCNO vip->ocno /* Remembered file column. */ #define SCNO vip->sc_col /* Current screen column. */ gp = sp->gp; vip = VIP(sp); didpaint = leftright_warp = 0; /* * 5: Reformat the lines. * * If the lines themselves have changed (:set list, for example), * fill in the map from scratch. Adjust the screen that's being * displayed if the leftright flag is set. */ if (F_ISSET(sp, SC_SCR_REFORMAT)) { /* Invalidate the line size cache. */ VI_SCR_CFLUSH(vip); /* Toss vs_line() cached information. */ if (F_ISSET(sp, SC_SCR_TOP)) { if (vs_sm_fill(sp, LNO, P_TOP)) return (1); } else if (F_ISSET(sp, SC_SCR_CENTER)) { if (vs_sm_fill(sp, LNO, P_MIDDLE)) return (1); } else if (vs_sm_fill(sp, OOBLNO, P_TOP)) return (1); F_SET(sp, SC_SCR_REDRAW); } /* * 6: Line movement. * * Line changes can cause the top line to change as well. As * before, if the movement is large, the screen is repainted. * * 6a: Small screens. * * Users can use the window, w300, w1200 and w9600 options to make * the screen artificially small. The behavior of these options * in the historic vi wasn't all that consistent, and, in fact, it * was never documented how various screen movements affected the * screen size. Generally, one of three things would happen: * 1: The screen would expand in size, showing the line * 2: The screen would scroll, showing the line * 3: The screen would compress to its smallest size and * repaint. * In general, scrolling didn't cause compression (200^D was handled * the same as ^D), movement to a specific line would (:N where N * was 1 line below the screen caused a screen compress), and cursor * movement would scroll if it was 11 lines or less, and compress if * it was more than 11 lines. (And, no, I have no idea where the 11 * comes from.) * * What we do is try and figure out if the line is less than half of * a full screen away. If it is, we expand the screen if there's * room, and then scroll as necessary. The alternative is to compress * and repaint. * * !!! * This code is a special case from beginning to end. Unfortunately, * home modems are still slow enough that it's worth having. * * XXX * If the line a really long one, i.e. part of the line is on the * screen but the column offset is not, we'll end up in the adjust * code, when we should probably have compressed the screen. */ if (IS_SMALL(sp)) if (LNO < HMAP->lno) { lcnt = vs_sm_nlines(sp, HMAP, LNO, sp->t_maxrows); if (lcnt <= HALFSCREEN(sp)) for (; lcnt && sp->t_rows != sp->t_maxrows; --lcnt, ++sp->t_rows) { ++TMAP; if (vs_sm_1down(sp)) return (1); } else goto small_fill; } else if (LNO > TMAP->lno) { lcnt = vs_sm_nlines(sp, TMAP, LNO, sp->t_maxrows); if (lcnt <= HALFSCREEN(sp)) for (; lcnt && sp->t_rows != sp->t_maxrows; --lcnt, ++sp->t_rows) { if (vs_sm_next(sp, TMAP, TMAP + 1)) return (1); ++TMAP; if (vs_line(sp, TMAP, NULL, NULL)) return (1); } else { small_fill: (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_clrtoeol(sp); for (; sp->t_rows > sp->t_minrows; --sp->t_rows, --TMAP) { (void)gp->scr_move(sp, TMAP - HMAP, 0); (void)gp->scr_clrtoeol(sp); } if (vs_sm_fill(sp, LNO, P_FILL)) return (1); F_SET(sp, SC_SCR_REDRAW); goto adjust; } } /* * 6b: Line down, or current screen. */ if (LNO >= HMAP->lno) { /* Current screen. */ if (LNO <= TMAP->lno) goto adjust; if (F_ISSET(sp, SC_SCR_TOP)) goto top; if (F_ISSET(sp, SC_SCR_CENTER)) goto middle; /* * If less than half a screen above the line, scroll down * until the line is on the screen. */ lcnt = vs_sm_nlines(sp, TMAP, LNO, HALFTEXT(sp)); if (lcnt < HALFTEXT(sp)) { while (lcnt--) if (vs_sm_1up(sp)) return (1); goto adjust; } goto bottom; } /* * 6c: If not on the current screen, may request center or top. */ if (F_ISSET(sp, SC_SCR_TOP)) goto top; if (F_ISSET(sp, SC_SCR_CENTER)) goto middle; /* * 6d: Line up. */ lcnt = vs_sm_nlines(sp, HMAP, LNO, HALFTEXT(sp)); if (lcnt < HALFTEXT(sp)) { /* * If less than half a screen below the line, scroll up until * the line is the first line on the screen. Special check so * that if the screen has been emptied, we refill it. */ if (db_exist(sp, HMAP->lno)) { while (lcnt--) if (vs_sm_1down(sp)) return (1); goto adjust; } /* * If less than a half screen from the bottom of the file, * put the last line of the file on the bottom of the screen. */ bottom: if (db_last(sp, &lastline)) return (1); tmp.lno = LNO; tmp.coff = HMAP->coff; tmp.soff = 1; lcnt = vs_sm_nlines(sp, &tmp, lastline, sp->t_rows); if (lcnt < HALFTEXT(sp)) { if (vs_sm_fill(sp, lastline, P_BOTTOM)) return (1); F_SET(sp, SC_SCR_REDRAW); goto adjust; } /* It's not close, just put the line in the middle. */ goto middle; } /* * If less than half a screen from the top of the file, put the first * line of the file at the top of the screen. Otherwise, put the line * in the middle of the screen. */ tmp.lno = 1; tmp.coff = HMAP->coff; tmp.soff = 1; lcnt = vs_sm_nlines(sp, &tmp, LNO, HALFTEXT(sp)); if (lcnt < HALFTEXT(sp)) { if (vs_sm_fill(sp, 1, P_TOP)) return (1); } else middle: if (vs_sm_fill(sp, LNO, P_MIDDLE)) return (1); if (0) { top: if (vs_sm_fill(sp, LNO, P_TOP)) return (1); } F_SET(sp, SC_SCR_REDRAW); /* * At this point we know part of the line is on the screen. Since * scrolling is done using logical lines, not physical, all of the * line may not be on the screen. While that's not necessarily bad, * if the part the cursor is on isn't there, we're going to lose. * This can be tricky; if the line covers the entire screen, lno * may be the same as both ends of the map, that's why we test BOTH * the top and the bottom of the map. This isn't a problem for * left-right scrolling, the cursor movement code handles the problem. * * There's a performance issue here if editing *really* long lines. * This gets to the right spot by scrolling, and, in a binary, by * scrolling hundreds of lines. If the adjustment looks like it's * going to be a serious problem, refill the screen and repaint. */ adjust: if (!O_ISSET(sp, O_LEFTRIGHT) && (LNO == HMAP->lno || LNO == TMAP->lno)) { cnt = vs_screens(sp, LNO, &CNO); if (LNO == HMAP->lno && cnt < HMAP->soff) if ((HMAP->soff - cnt) > HALFTEXT(sp)) { HMAP->soff = cnt; vs_sm_fill(sp, OOBLNO, P_TOP); F_SET(sp, SC_SCR_REDRAW); } else while (cnt < HMAP->soff) if (vs_sm_1down(sp)) return (1); if (LNO == TMAP->lno && cnt > TMAP->soff) if ((cnt - TMAP->soff) > HALFTEXT(sp)) { TMAP->soff = cnt; vs_sm_fill(sp, OOBLNO, P_BOTTOM); F_SET(sp, SC_SCR_REDRAW); } else while (cnt > TMAP->soff) if (vs_sm_1up(sp)) return (1); } /* * If the screen needs to be repainted, skip cursor optimization. * However, in the code above we skipped leftright scrolling on * the grounds that the cursor code would handle it. Make sure * the right screen is up. */ if (F_ISSET(sp, SC_SCR_REDRAW)) { if (O_ISSET(sp, O_LEFTRIGHT)) goto slow; goto paint; } /* * 7: Cursor movements (current screen only). */ if (!LF_ISSET(UPDATE_CURSOR)) goto number; /* * Decide cursor position. If the line has changed, the cursor has * moved over a tab, or don't know where the cursor was, reparse the * line. Otherwise, we've just moved over fixed-width characters, * and can calculate the left/right scrolling and cursor movement * without reparsing the line. Note that we don't know which (if any) * of the characters between the old and new cursor positions changed. * * XXX * With some work, it should be possible to handle tabs quickly, at * least in obvious situations, like moving right and encountering * a tab, without reparsing the whole line. * * If the line we're working with has changed, reread it.. */ if (F_ISSET(vip, VIP_CUR_INVALID) || LNO != OLNO) goto slow; /* Otherwise, if nothing's changed, ignore the cursor. */ if (CNO == OCNO) goto fast; /* * Get the current line. If this fails, we either have an empty * file and can just repaint, or there's a real problem. This * isn't a performance issue because there aren't any ways to get * here repeatedly. */ if (db_eget(sp, LNO, &p, &len, &isempty)) { if (isempty) goto slow; return (1); } #ifdef DEBUG /* Sanity checking. */ if (CNO >= len && len != 0) { msgq(sp, M_ERR, "Error: %s/%d: cno (%u) >= len (%u)", tail(__FILE__), __LINE__, CNO, len); return (1); } #endif /* * The basic scheme here is to look at the characters in between * the old and new positions and decide how big they are on the * screen, and therefore, how many screen positions to move. */ if (CNO < OCNO) { /* * 7a: Cursor moved left. * * Point to the old character. The old cursor position can * be past EOL if, for example, we just deleted the rest of * the line. In this case, since we don't know the width of * the characters we traversed, we have to do it slowly. */ p += OCNO; cnt = (OCNO - CNO) + 1; if (OCNO >= len) goto slow; /* * Quick sanity check -- it's hard to figure out exactly when * we cross a screen boundary as we do in the cursor right * movement. If cnt is so large that we're going to cross the * boundary no matter what, stop now. */ if (SCNO + 1 + MAX_CHARACTER_COLUMNS < cnt) goto slow; /* * Count up the widths of the characters. If it's a tab * character, go do it the the slow way. */ for (cwtotal = 0; cnt--; cwtotal += KEY_LEN(sp, ch)) if ((ch = *(u_char *)p--) == '\t') goto slow; /* * Decrement the screen cursor by the total width of the * characters minus 1. */ cwtotal -= 1; /* * If we're moving left, and there's a wide character in the * current position, go to the end of the character. */ if (KEY_LEN(sp, ch) > 1) cwtotal -= KEY_LEN(sp, ch) - 1; /* * If the new column moved us off of the current logical line, * calculate a new one. If doing leftright scrolling, we've * moved off of the current screen, as well. */ if (SCNO < cwtotal) goto slow; SCNO -= cwtotal; } else { /* * 7b: Cursor moved right. * * Point to the first character to the right. */ p += OCNO + 1; cnt = CNO - OCNO; /* * Count up the widths of the characters. If it's a tab * character, go do it the the slow way. If we cross a * screen boundary, we can quit. */ for (cwtotal = SCNO; cnt--;) { if ((ch = *(u_char *)p++) == '\t') goto slow; if ((cwtotal += KEY_LEN(sp, ch)) >= SCREEN_COLS(sp)) break; } /* * Increment the screen cursor by the total width of the * characters. */ SCNO = cwtotal; /* See screen change comment in section 6a. */ if (SCNO >= SCREEN_COLS(sp)) goto slow; } /* * 7c: Fast cursor update. * * We have the current column, retrieve the current row. */ fast: (void)gp->scr_cursor(sp, &y, ¬used); goto done_cursor; /* * 7d: Slow cursor update. * * Walk through the map and find the current line. */ slow: for (smp = HMAP; smp->lno != LNO; ++smp); /* * 7e: Leftright scrolling adjustment. * * If doing left-right scrolling and the cursor movement has changed * the displayed screen, scroll the screen left or right, unless we're * updating the info line in which case we just scroll that one line. * We adjust the offset up or down until we have a window that covers * the current column, making sure that we adjust differently for the * first screen as compared to subsequent ones. */ if (O_ISSET(sp, O_LEFTRIGHT)) { /* * Get the screen column for this character, and correct * for the number option offset. */ cnt = vs_columns(sp, NULL, LNO, &CNO, NULL); if (O_ISSET(sp, O_NUMBER)) cnt -= O_NUMBER_LENGTH; /* Adjust the window towards the beginning of the line. */ off = smp->coff; if (off >= cnt) { do { if (off >= O_VAL(sp, O_SIDESCROLL)) off -= O_VAL(sp, O_SIDESCROLL); else { off = 0; break; } } while (off >= cnt); goto shifted; } /* Adjust the window towards the end of the line. */ if (off == 0 && off + SCREEN_COLS(sp) < cnt || off != 0 && off + sp->cols < cnt) { do { off += O_VAL(sp, O_SIDESCROLL); } while (off + sp->cols < cnt); shifted: /* Fill in screen map with the new offset. */ if (F_ISSET(sp, SC_TINPUT_INFO)) smp->coff = off; else { for (smp = HMAP; smp <= TMAP; ++smp) smp->coff = off; leftright_warp = 1; } goto paint; } /* * We may have jumped here to adjust a leftright screen because * redraw was set. If so, we have to paint the entire screen. */ if (F_ISSET(sp, SC_SCR_REDRAW)) goto paint; } /* * Update the screen lines for this particular file line until we * have a new screen cursor position. */ for (y = -1, vip->sc_smap = NULL; smp <= TMAP && smp->lno == LNO; ++smp) { if (vs_line(sp, smp, &y, &SCNO)) return (1); if (y != -1) { vip->sc_smap = smp; break; } } goto done_cursor; /* * 8: Repaint the entire screen. * * Lost big, do what you have to do. We flush the cache, since * SC_SCR_REDRAW gets set when the screen isn't worth fixing, and * it's simpler to repaint. So, don't trust anything that we * think we know about it. */ paint: for (smp = HMAP; smp <= TMAP; ++smp) SMAP_FLUSH(smp); for (y = -1, vip->sc_smap = NULL, smp = HMAP; smp <= TMAP; ++smp) { if (vs_line(sp, smp, &y, &SCNO)) return (1); if (y != -1 && vip->sc_smap == NULL) vip->sc_smap = smp; } /* * If it's a small screen and we're redrawing, clear the unused lines, * ex may have overwritten them. */ if (F_ISSET(sp, SC_SCR_REDRAW) && IS_SMALL(sp)) for (cnt = sp->t_rows; cnt <= sp->t_maxrows; ++cnt) { (void)gp->scr_move(sp, cnt, 0); (void)gp->scr_clrtoeol(sp); } didpaint = 1; done_cursor: /* * Sanity checking. When the repainting code messes up, the usual * result is we don't repaint the cursor and so sc_smap will be * NULL. If we're debugging, die, otherwise restart from scratch. */ #ifdef DEBUG if (vip->sc_smap == NULL) abort(); #else if (vip->sc_smap == NULL) { F_SET(sp, SC_SCR_REFORMAT); return (vs_paint(sp, flags)); } #endif /* * 9: Set the remembered cursor values. */ OCNO = CNO; OLNO = LNO; /* * 10: Repaint the line numbers. * * If O_NUMBER is set and the VIP_N_RENUMBER bit is set, and we * didn't repaint the screen, repaint all of the line numbers, * they've changed. */ number: if (O_ISSET(sp, O_NUMBER) && F_ISSET(vip, VIP_N_RENUMBER) && !didpaint && vs_number(sp)) return (1); /* * 11: Update the mode line, position the cursor, and flush changes. * * If we warped the screen, we have to refresh everything. */ if (leftright_warp) LF_SET(UPDATE_CURSOR | UPDATE_SCREEN); if (LF_ISSET(UPDATE_SCREEN) && !IS_ONELINE(sp) && !F_ISSET(vip, VIP_S_MODELINE) && !F_ISSET(sp, SC_TINPUT_INFO)) vs_modeline(sp); if (LF_ISSET(UPDATE_CURSOR)) { (void)gp->scr_move(sp, y, SCNO); /* * XXX * If the screen shifted, we recalculate the "most favorite" * cursor position. Vi won't know that we've warped the * screen, so it's going to have a wrong idea about where the * cursor should be. This is vi's problem, and fixing it here * is a gross layering violation. */ if (leftright_warp) (void)vs_column(sp, &sp->rcm); } if (LF_ISSET(UPDATE_SCREEN)) (void)gp->scr_refresh(sp, F_ISSET(vip, VIP_N_EX_PAINT)); /* 12: Clear the flags that are handled by this routine. */ F_CLR(sp, SC_SCR_CENTER | SC_SCR_REDRAW | SC_SCR_REFORMAT | SC_SCR_TOP); F_CLR(vip, VIP_CUR_INVALID | VIP_N_EX_PAINT | VIP_N_REFRESH | VIP_N_RENUMBER | VIP_S_MODELINE); return (0); #undef LNO #undef OLNO #undef CNO #undef OCNO #undef SCNO } /* * vs_modeline -- * Update the mode line. */ static void vs_modeline(sp) SCR *sp; { static char * const modes[] = { "215|Append", /* SM_APPEND */ "216|Change", /* SM_CHANGE */ "217|Command", /* SM_COMMAND */ "218|Insert", /* SM_INSERT */ "219|Replace", /* SM_REPLACE */ }; GS *gp; size_t cols, curcol, curlen, endpoint, len, midpoint; const char *t; int ellipsis; char *p, buf[20]; gp = sp->gp; /* * We put down the file name, the ruler, the mode and the dirty flag. * If there's not enough room, there's not enough room, we don't play * any special games. We try to put the ruler in the middle and the * mode and dirty flag at the end. * * !!! * Leave the last character blank, in case it's a really dumb terminal * with hardware scroll. Second, don't paint the last character in the * screen, SunOS 4.1.1 and Ultrix 4.2 curses won't let you. * * Move to the last line on the screen. */ (void)gp->scr_move(sp, LASTLINE(sp), 0); /* If more than one screen in the display, show the file name. */ curlen = 0; if (IS_SPLIT(sp)) { for (p = sp->frp->name; *p != '\0'; ++p); for (ellipsis = 0, cols = sp->cols / 2; --p > sp->frp->name;) { if (*p == '/') { ++p; break; } if ((curlen += KEY_LEN(sp, *p)) > cols) { ellipsis = 3; curlen += KEY_LEN(sp, '.') * 3 + KEY_LEN(sp, ' '); while (curlen > cols) { ++p; curlen -= KEY_LEN(sp, *p); } break; } } if (ellipsis) { while (ellipsis--) (void)gp->scr_addstr(sp, KEY_NAME(sp, '.'), KEY_LEN(sp, '.')); (void)gp->scr_addstr(sp, KEY_NAME(sp, ' '), KEY_LEN(sp, ' ')); } for (; *p != '\0'; ++p) (void)gp->scr_addstr(sp, KEY_NAME(sp, *p), KEY_LEN(sp, *p)); } /* Clear the rest of the line. */ (void)gp->scr_clrtoeol(sp); /* * Display the ruler. If we're not at the midpoint yet, move there. * Otherwise, add in two extra spaces. * * Adjust the current column for the fact that the editor uses it as * a zero-based number. * * XXX * Assume that numbers, commas, and spaces only take up a single * column on the screen. */ cols = sp->cols - 1; if (O_ISSET(sp, O_RULER)) { vs_column(sp, &curcol); len = snprintf(buf, sizeof(buf), "%lu,%lu", sp->lno, curcol + 1); midpoint = (cols - ((len + 1) / 2)) / 2; if (curlen < midpoint) { (void)gp->scr_move(sp, LASTLINE(sp), midpoint); curlen += len; } else if (curlen + 2 + len < cols) { (void)gp->scr_addstr(sp, " ", 2); curlen += 2 + len; } (void)gp->scr_addstr(sp, buf, len); } /* * Display the mode and the modified flag, as close to the end of the * line as possible, but guaranteeing at least two spaces between the * ruler and the modified flag. */ #define MODESIZE 9 endpoint = cols; if (O_ISSET(sp, O_SHOWMODE)) { if (F_ISSET(sp->ep, F_MODIFIED)) --endpoint; t = msg_cat(sp, modes[sp->showmode], &len); endpoint -= len; } if (endpoint > curlen + 2) { (void)gp->scr_move(sp, LASTLINE(sp), endpoint); if (O_ISSET(sp, O_SHOWMODE)) { if (F_ISSET(sp->ep, F_MODIFIED)) (void)gp->scr_addstr(sp, KEY_NAME(sp, '*'), KEY_LEN(sp, '*')); (void)gp->scr_addstr(sp, t, len); } } } vigor-0.016.orig/vi/vs_relative.c0100644000076400007640000001615407103707241015403 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)vs_relative.c 10.11 (Berkeley) 5/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * vs_column -- * Return the logical column of the cursor in the line. * * PUBLIC: int vs_column __P((SCR *, size_t *)); */ int vs_column(sp, colp) SCR *sp; size_t *colp; { VI_PRIVATE *vip; vip = VIP(sp); *colp = (O_ISSET(sp, O_LEFTRIGHT) ? vip->sc_smap->coff : (vip->sc_smap->soff - 1) * sp->cols) + vip->sc_col - (O_ISSET(sp, O_NUMBER) ? O_NUMBER_LENGTH : 0); return (0); } /* * vs_screens -- * Return the screens necessary to display the line, or if specified, * the physical character column within the line, including space * required for the O_NUMBER and O_LIST options. * * PUBLIC: size_t vs_screens __P((SCR *, recno_t, size_t *)); */ size_t vs_screens(sp, lno, cnop) SCR *sp; recno_t lno; size_t *cnop; { size_t cols, screens; /* Left-right screens are simple, it's always 1. */ if (O_ISSET(sp, O_LEFTRIGHT)) return (1); /* * Check for a cached value. We maintain a cache because, if the * line is large, this routine gets called repeatedly. One other * hack, lots of time the cursor is on column one, which is an easy * one. */ if (cnop == NULL) { if (VIP(sp)->ss_lno == lno) return (VIP(sp)->ss_screens); } else if (*cnop == 0) return (1); /* Figure out how many columns the line/column needs. */ cols = vs_columns(sp, NULL, lno, cnop, NULL); screens = (cols / sp->cols + (cols % sp->cols ? 1 : 0)); if (screens == 0) screens = 1; /* Cache the value. */ if (cnop == NULL) { VIP(sp)->ss_lno = lno; VIP(sp)->ss_screens = screens; } return (screens); } /* * vs_columns -- * Return the screen columns necessary to display the line, or, * if specified, the physical character column within the line. * * PUBLIC: size_t vs_columns __P((SCR *, char *, recno_t, size_t *, size_t *)); */ size_t vs_columns(sp, lp, lno, cnop, diffp) SCR *sp; char *lp; recno_t lno; size_t *cnop, *diffp; { size_t chlen, cno, curoff, last, len, scno; int ch, leftright, listset; char *p; /* Need the line to go any further. */ if (lp == NULL) { (void)db_get(sp, lno, 0, &lp, &len); if (len == 0) goto done; } /* Missing or empty lines are easy. */ if (lp == NULL) { done: if (diffp != NULL) /* XXX */ *diffp = 0; return (0); } /* Store away the values of the list and leftright edit options. */ listset = O_ISSET(sp, O_LIST); leftright = O_ISSET(sp, O_LEFTRIGHT); /* * Initialize the pointer into the buffer and screen and current * offsets. */ p = lp; curoff = scno = 0; /* Leading number if O_NUMBER option set. */ if (O_ISSET(sp, O_NUMBER)) scno += O_NUMBER_LENGTH; /* Macro to return the display length of any signal character. */ #define CHLEN(val) (ch = *(u_char *)p++) == '\t' && \ !listset ? TAB_OFF(val) : KEY_LEN(sp, ch); /* * If folding screens (the historic vi screen format), past the end * of the current screen, and the character was a tab, reset the * current screen column to 0, and the total screen columns to the * last column of the screen. Otherwise, display the rest of the * character in the next screen. */ #define TAB_RESET { \ curoff += chlen; \ if (!leftright && curoff >= sp->cols) \ if (ch == '\t') { \ curoff = 0; \ scno -= scno % sp->cols; \ } else \ curoff -= sp->cols; \ } if (cnop == NULL) while (len--) { chlen = CHLEN(curoff); last = scno; scno += chlen; TAB_RESET; } else for (cno = *cnop;; --cno) { chlen = CHLEN(curoff); last = scno; scno += chlen; TAB_RESET; if (cno == 0) break; } /* Add the trailing '$' if the O_LIST option set. */ if (listset && cnop == NULL) scno += KEY_LEN(sp, '$'); /* * The text input screen code needs to know how much additional * room the last two characters required, so that it can handle * tab character displays correctly. */ if (diffp != NULL) *diffp = scno - last; return (scno); } /* * vs_rcm -- * Return the physical column from the line that will display a * character closest to the currently most attractive character * position (which is stored as a screen column). * * PUBLIC: size_t vs_rcm __P((SCR *, recno_t, int)); */ size_t vs_rcm(sp, lno, islast) SCR *sp; recno_t lno; int islast; { size_t len; /* Last character is easy, and common. */ if (islast) { if (db_get(sp, lno, 0, NULL, &len) || len == 0) return (0); return (len - 1); } /* First character is easy, and common. */ if (sp->rcm == 0) return (0); return (vs_colpos(sp, lno, sp->rcm)); } /* * vs_colpos -- * Return the physical column from the line that will display a * character closest to the specified screen column. * * PUBLIC: size_t vs_colpos __P((SCR *, recno_t, size_t)); */ size_t vs_colpos(sp, lno, cno) SCR *sp; recno_t lno; size_t cno; { size_t chlen, curoff, len, llen, off, scno; int ch, leftright, listset; char *lp, *p; /* Need the line to go any further. */ (void)db_get(sp, lno, 0, &lp, &llen); /* Missing or empty lines are easy. */ if (lp == NULL || llen == 0) return (0); /* Store away the values of the list and leftright edit options. */ listset = O_ISSET(sp, O_LIST); leftright = O_ISSET(sp, O_LEFTRIGHT); /* Discard screen (logical) lines. */ off = cno / sp->cols; cno %= sp->cols; for (scno = 0, p = lp, len = llen; off--;) { for (; len && scno < sp->cols; --len) scno += CHLEN(scno); /* * If reached the end of the physical line, return the last * physical character in the line. */ if (len == 0) return (llen - 1); /* * If folding screens (the historic vi screen format), past * the end of the current screen, and the character was a tab, * reset the current screen column to 0. Otherwise, the rest * of the character is displayed in the next screen. */ if (leftright && ch == '\t') scno = 0; else scno -= sp->cols; } /* Step through the line until reach the right character or EOL. */ for (curoff = scno; len--;) { chlen = CHLEN(curoff); /* * If we've reached the specific character, there are three * cases. * * 1: scno == cno, i.e. the current character ends at the * screen character we care about. * a: off < llen - 1, i.e. not the last character in * the line, return the offset of the next character. * b: else return the offset of the last character. * 2: scno != cno, i.e. this character overruns the character * we care about, return the offset of this character. */ if ((scno += chlen) >= cno) { off = p - lp; return (scno == cno ? (off < llen - 1 ? off : llen - 1) : off - 1); } TAB_RESET; } /* No such character; return the start of the last character. */ return (llen - 1); } vigor-0.016.orig/vi/vs_smap.c0100644000076400007640000006711307103707241014531 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)vs_smap.c 10.25 (Berkeley) 7/12/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static int vs_deleteln __P((SCR *, int)); static int vs_insertln __P((SCR *, int)); static int vs_sm_delete __P((SCR *, recno_t)); static int vs_sm_down __P((SCR *, MARK *, recno_t, scroll_t, SMAP *)); static int vs_sm_erase __P((SCR *)); static int vs_sm_insert __P((SCR *, recno_t)); static int vs_sm_reset __P((SCR *, recno_t)); static int vs_sm_up __P((SCR *, MARK *, recno_t, scroll_t, SMAP *)); /* * vs_change -- * Make a change to the screen. * * PUBLIC: int vs_change __P((SCR *, recno_t, lnop_t)); */ int vs_change(sp, lno, op) SCR *sp; recno_t lno; lnop_t op; { VI_PRIVATE *vip; SMAP *p; size_t cnt, oldy, oldx; vip = VIP(sp); /* * XXX * Very nasty special case. The historic vi code displays a single * space (or a '$' if the list option is set) for the first line in * an "empty" file. If we "insert" a line, that line gets scrolled * down, not repainted, so it's incorrect when we refresh the screen. * The vi text input functions detect it explicitly and don't insert * a new line. * * Check for line #2 before going to the end of the file. */ if ((op == LINE_APPEND && lno == 0 || op == LINE_INSERT && lno == 1) && !db_exist(sp, 2)) { lno = 1; op = LINE_RESET; } /* Appending is the same as inserting, if the line is incremented. */ if (op == LINE_APPEND) { ++lno; op = LINE_INSERT; } /* Ignore the change if the line is after the map. */ if (lno > TMAP->lno) return (0); /* * If the line is before the map, and it's a decrement, decrement * the map. If it's an increment, increment the map. Otherwise, * ignore it. */ if (lno < HMAP->lno) { switch (op) { case LINE_APPEND: abort(); /* NOTREACHED */ case LINE_DELETE: for (p = HMAP, cnt = sp->t_rows; cnt--; ++p) --p->lno; if (sp->lno >= lno) --sp->lno; F_SET(vip, VIP_N_RENUMBER); break; case LINE_INSERT: for (p = HMAP, cnt = sp->t_rows; cnt--; ++p) ++p->lno; if (sp->lno >= lno) ++sp->lno; F_SET(vip, VIP_N_RENUMBER); break; case LINE_RESET: break; } return (0); } F_SET(vip, VIP_N_REFRESH); /* * Invalidate the line size cache, and invalidate the cursor if it's * on this line, */ VI_SCR_CFLUSH(vip); if (sp->lno == lno) F_SET(vip, VIP_CUR_INVALID); /* * If ex modifies the screen after ex output is already on the screen * or if we've switched into ex canonical mode, don't touch it -- we'll * get scrolling wrong, at best. */ if (!F_ISSET(sp, SC_TINPUT_INFO) && (F_ISSET(sp, SC_SCR_EXWROTE) || VIP(sp)->totalcount > 1)) { F_SET(vip, VIP_N_EX_REDRAW); return (0); } /* Save and restore the cursor for these routines. */ (void)sp->gp->scr_cursor(sp, &oldy, &oldx); switch (op) { case LINE_DELETE: if (vs_sm_delete(sp, lno)) return (1); F_SET(vip, VIP_N_RENUMBER); break; case LINE_INSERT: if (vs_sm_insert(sp, lno)) return (1); F_SET(vip, VIP_N_RENUMBER); break; case LINE_RESET: if (vs_sm_reset(sp, lno)) return (1); break; default: abort(); } (void)sp->gp->scr_move(sp, oldy, oldx); return (0); } /* * vs_sm_fill -- * Fill in the screen map, placing the specified line at the * right position. There isn't any way to tell if an SMAP * entry has been filled in, so this routine had better be * called with P_FILL set before anything else is done. * * !!! * Unexported interface: if lno is OOBLNO, P_TOP means that the HMAP * slot is already filled in, P_BOTTOM means that the TMAP slot is * already filled in, and we just finish up the job. * * PUBLIC: int vs_sm_fill __P((SCR *, recno_t, pos_t)); */ int vs_sm_fill(sp, lno, pos) SCR *sp; recno_t lno; pos_t pos; { SMAP *p, tmp; size_t cnt; /* Flush all cached information from the SMAP. */ for (p = HMAP, cnt = sp->t_rows; cnt--; ++p) SMAP_FLUSH(p); /* * If the map is filled, the screen must be redrawn. * * XXX * This is a bug. We should try and figure out if the desired line * is already in the map or close by -- scrolling the screen would * be a lot better than redrawing. */ F_SET(sp, SC_SCR_REDRAW); switch (pos) { case P_FILL: tmp.lno = 1; tmp.coff = 0; tmp.soff = 1; /* See if less than half a screen from the top. */ if (vs_sm_nlines(sp, &tmp, lno, HALFTEXT(sp)) <= HALFTEXT(sp)) { lno = 1; goto top; } /* See if less than half a screen from the bottom. */ if (db_last(sp, &tmp.lno)) return (1); tmp.coff = 0; tmp.soff = vs_screens(sp, tmp.lno, NULL); if (vs_sm_nlines(sp, &tmp, lno, HALFTEXT(sp)) <= HALFTEXT(sp)) { TMAP->lno = tmp.lno; TMAP->coff = tmp.coff; TMAP->soff = tmp.soff; goto bottom; } goto middle; case P_TOP: if (lno != OOBLNO) { top: HMAP->lno = lno; HMAP->coff = 0; HMAP->soff = 1; } /* If we fail, just punt. */ for (p = HMAP, cnt = sp->t_rows; --cnt; ++p) if (vs_sm_next(sp, p, p + 1)) goto err; break; case P_MIDDLE: /* If we fail, guess that the file is too small. */ middle: p = HMAP + sp->t_rows / 2; p->lno = lno; p->coff = 0; p->soff = 1; for (; p > HMAP; --p) if (vs_sm_prev(sp, p, p - 1)) { lno = 1; goto top; } /* If we fail, just punt. */ p = HMAP + sp->t_rows / 2; for (; p < TMAP; ++p) if (vs_sm_next(sp, p, p + 1)) goto err; break; case P_BOTTOM: if (lno != OOBLNO) { TMAP->lno = lno; TMAP->coff = 0; TMAP->soff = vs_screens(sp, lno, NULL); } /* If we fail, guess that the file is too small. */ bottom: for (p = TMAP; p > HMAP; --p) if (vs_sm_prev(sp, p, p - 1)) { lno = 1; goto top; } break; default: abort(); } return (0); /* * Try and put *something* on the screen. If this fails, we have a * serious hard error. */ err: HMAP->lno = 1; HMAP->coff = 0; HMAP->soff = 1; for (p = HMAP; p < TMAP; ++p) if (vs_sm_next(sp, p, p + 1)) return (1); return (0); } /* * For the routines vs_sm_reset, vs_sm_delete and vs_sm_insert: if the * screen contains only a single line (whether because the screen is small * or the line large), it gets fairly exciting. Skip the fun, set a flag * so the screen map is refilled and the screen redrawn, and return. This * is amazingly slow, but it's not clear that anyone will care. */ #define HANDLE_WEIRDNESS(cnt) { \ if (cnt >= sp->t_rows) { \ F_SET(sp, SC_SCR_REFORMAT); \ return (0); \ } \ } /* * vs_sm_delete -- * Delete a line out of the SMAP. */ static int vs_sm_delete(sp, lno) SCR *sp; recno_t lno; { SMAP *p, *t; size_t cnt_orig; /* * Find the line in the map, and count the number of screen lines * which display any part of the deleted line. */ for (p = HMAP; p->lno != lno; ++p); if (O_ISSET(sp, O_LEFTRIGHT)) cnt_orig = 1; else for (cnt_orig = 1, t = p + 1; t <= TMAP && t->lno == lno; ++cnt_orig, ++t); HANDLE_WEIRDNESS(cnt_orig); /* Delete that many lines from the screen. */ (void)sp->gp->scr_move(sp, p - HMAP, 0); if (vs_deleteln(sp, cnt_orig)) return (1); /* Shift the screen map up. */ memmove(p, p + cnt_orig, (((TMAP - p) - cnt_orig) + 1) * sizeof(SMAP)); /* Decrement the line numbers for the rest of the map. */ for (t = TMAP - cnt_orig; p <= t; ++p) --p->lno; /* Display the new lines. */ for (p = TMAP - cnt_orig;;) { if (p < TMAP && vs_sm_next(sp, p, p + 1)) return (1); /* vs_sm_next() flushed the cache. */ if (vs_line(sp, ++p, NULL, NULL)) return (1); if (p == TMAP) break; } return (0); } /* * vs_sm_insert -- * Insert a line into the SMAP. */ static int vs_sm_insert(sp, lno) SCR *sp; recno_t lno; { SMAP *p, *t; size_t cnt_orig, cnt, coff; /* Save the offset. */ coff = HMAP->coff; /* * Find the line in the map, find out how many screen lines * needed to display the line. */ for (p = HMAP; p->lno != lno; ++p); cnt_orig = vs_screens(sp, lno, NULL); HANDLE_WEIRDNESS(cnt_orig); /* * The lines left in the screen override the number of screen * lines in the inserted line. */ cnt = (TMAP - p) + 1; if (cnt_orig > cnt) cnt_orig = cnt; /* Push down that many lines. */ (void)sp->gp->scr_move(sp, p - HMAP, 0); if (vs_insertln(sp, cnt_orig)) return (1); /* Shift the screen map down. */ memmove(p + cnt_orig, p, (((TMAP - p) - cnt_orig) + 1) * sizeof(SMAP)); /* Increment the line numbers for the rest of the map. */ for (t = p + cnt_orig; t <= TMAP; ++t) ++t->lno; /* Fill in the SMAP for the new lines, and display. */ for (cnt = 1, t = p; cnt <= cnt_orig; ++t, ++cnt) { t->lno = lno; t->coff = coff; t->soff = cnt; SMAP_FLUSH(t); if (vs_line(sp, t, NULL, NULL)) return (1); } return (0); } /* * vs_sm_reset -- * Reset a line in the SMAP. */ static int vs_sm_reset(sp, lno) SCR *sp; recno_t lno; { SMAP *p, *t; size_t cnt_orig, cnt_new, cnt, diff; /* * See if the number of on-screen rows taken up by the old display * for the line is the same as the number needed for the new one. * If so, repaint, otherwise do it the hard way. */ for (p = HMAP; p->lno != lno; ++p); if (O_ISSET(sp, O_LEFTRIGHT)) { t = p; cnt_orig = cnt_new = 1; } else { for (cnt_orig = 0, t = p; t <= TMAP && t->lno == lno; ++cnt_orig, ++t); cnt_new = vs_screens(sp, lno, NULL); } HANDLE_WEIRDNESS(cnt_orig); if (cnt_orig == cnt_new) { do { SMAP_FLUSH(p); if (vs_line(sp, p, NULL, NULL)) return (1); } while (++p < t); return (0); } if (cnt_orig < cnt_new) { /* Get the difference. */ diff = cnt_new - cnt_orig; /* * The lines left in the screen override the number of screen * lines in the inserted line. */ cnt = (TMAP - p) + 1; if (diff > cnt) diff = cnt; /* If there are any following lines, push them down. */ if (cnt > 1) { (void)sp->gp->scr_move(sp, p - HMAP, 0); if (vs_insertln(sp, diff)) return (1); /* Shift the screen map down. */ memmove(p + diff, p, (((TMAP - p) - diff) + 1) * sizeof(SMAP)); } /* Fill in the SMAP for the replaced line, and display. */ for (cnt = 1, t = p; cnt_new-- && t <= TMAP; ++t, ++cnt) { t->lno = lno; t->soff = cnt; SMAP_FLUSH(t); if (vs_line(sp, t, NULL, NULL)) return (1); } } else { /* Get the difference. */ diff = cnt_orig - cnt_new; /* Delete that many lines from the screen. */ (void)sp->gp->scr_move(sp, p - HMAP, 0); if (vs_deleteln(sp, diff)) return (1); /* Shift the screen map up. */ memmove(p, p + diff, (((TMAP - p) - diff) + 1) * sizeof(SMAP)); /* Fill in the SMAP for the replaced line, and display. */ for (cnt = 1, t = p; cnt_new--; ++t, ++cnt) { t->lno = lno; t->soff = cnt; SMAP_FLUSH(t); if (vs_line(sp, t, NULL, NULL)) return (1); } /* Display the new lines at the bottom of the screen. */ for (t = TMAP - diff;;) { if (t < TMAP && vs_sm_next(sp, t, t + 1)) return (1); /* vs_sm_next() flushed the cache. */ if (vs_line(sp, ++t, NULL, NULL)) return (1); if (t == TMAP) break; } } return (0); } /* * vs_sm_scroll * Scroll the SMAP up/down count logical lines. Different * semantics based on the vi command, *sigh*. * * PUBLIC: int vs_sm_scroll __P((SCR *, MARK *, recno_t, scroll_t)); */ int vs_sm_scroll(sp, rp, count, scmd) SCR *sp; MARK *rp; recno_t count; scroll_t scmd; { SMAP *smp; /* * Invalidate the cursor. The line is probably going to change, * (although for ^E and ^Y it may not). In any case, the scroll * routines move the cursor to draw things. */ F_SET(VIP(sp), VIP_CUR_INVALID); /* Find the cursor in the screen. */ if (vs_sm_cursor(sp, &smp)) return (1); switch (scmd) { case CNTRL_B: case CNTRL_U: case CNTRL_Y: case Z_CARAT: if (vs_sm_down(sp, rp, count, scmd, smp)) return (1); break; case CNTRL_D: case CNTRL_E: case CNTRL_F: case Z_PLUS: if (vs_sm_up(sp, rp, count, scmd, smp)) return (1); break; default: abort(); } /* * !!! * If we're at the start of a line, go for the first non-blank. * This makes it look like the old vi, even though we're moving * around by logical lines, not physical ones. * * XXX * In the presence of a long line, which has more than a screen * width of leading spaces, this code can cause a cursor warp. * Live with it. */ if (scmd != CNTRL_E && scmd != CNTRL_Y && rp->cno == 0 && nonblank(sp, rp->lno, &rp->cno)) return (1); return (0); } /* * vs_sm_up -- * Scroll the SMAP up count logical lines. */ static int vs_sm_up(sp, rp, count, scmd, smp) SCR *sp; MARK *rp; scroll_t scmd; recno_t count; SMAP *smp; { int cursor_set, echanged, zset; SMAP *ssmp, s1, s2; /* * Check to see if movement is possible. * * Get the line after the map. If that line is a new one (and if * O_LEFTRIGHT option is set, this has to be true), and the next * line doesn't exist, and the cursor doesn't move, or the cursor * isn't even on the screen, or the cursor is already at the last * line in the map, it's an error. If that test succeeded because * the cursor wasn't at the end of the map, test to see if the map * is mostly empty. */ if (vs_sm_next(sp, TMAP, &s1)) return (1); if (s1.lno > TMAP->lno && !db_exist(sp, s1.lno)) { if (scmd == CNTRL_E || scmd == Z_PLUS || smp == TMAP) { v_eof(sp, NULL); return (1); } if (vs_sm_next(sp, smp, &s1)) return (1); if (s1.lno > smp->lno && !db_exist(sp, s1.lno)) { v_eof(sp, NULL); return (1); } } /* * Small screens: see vs_refresh.c section 6a. * * If it's a small screen, and the movement isn't larger than a * screen, i.e some context will remain, open up the screen and * display by scrolling. In this case, the cursor moves down one * line for each line displayed. Otherwise, erase/compress and * repaint, and move the cursor to the first line in the screen. * Note, the ^F command is always in the latter case, for historical * reasons. */ cursor_set = 0; if (IS_SMALL(sp)) { if (count >= sp->t_maxrows || scmd == CNTRL_F) { s1 = TMAP[0]; if (vs_sm_erase(sp)) return (1); for (; count--; s1 = s2) { if (vs_sm_next(sp, &s1, &s2)) return (1); if (s2.lno != s1.lno && !db_exist(sp, s2.lno)) break; } TMAP[0] = s2; if (vs_sm_fill(sp, OOBLNO, P_BOTTOM)) return (1); return (vs_sm_position(sp, rp, 0, P_TOP)); } cursor_set = scmd == CNTRL_E || vs_sm_cursor(sp, &ssmp); for (; count && sp->t_rows != sp->t_maxrows; --count, ++sp->t_rows) { if (vs_sm_next(sp, TMAP, &s1)) return (1); if (TMAP->lno != s1.lno && !db_exist(sp, s1.lno)) break; *++TMAP = s1; /* vs_sm_next() flushed the cache. */ if (vs_line(sp, TMAP, NULL, NULL)) return (1); if (!cursor_set) ++ssmp; } if (!cursor_set) { rp->lno = ssmp->lno; rp->cno = ssmp->c_sboff; } if (count == 0) return (0); } for (echanged = zset = 0; count; --count) { /* Decide what would show up on the screen. */ if (vs_sm_next(sp, TMAP, &s1)) return (1); /* If the line doesn't exist, we're done. */ if (TMAP->lno != s1.lno && !db_exist(sp, s1.lno)) break; /* Scroll the screen cursor up one logical line. */ if (vs_sm_1up(sp)) return (1); switch (scmd) { case CNTRL_E: if (smp > HMAP) --smp; else echanged = 1; break; case Z_PLUS: if (zset) { if (smp > HMAP) --smp; } else { smp = TMAP; zset = 1; } /* FALLTHROUGH */ default: break; } } if (cursor_set) return(0); switch (scmd) { case CNTRL_E: /* * On a ^E that was forced to change lines, try and keep the * cursor as close as possible to the last position, but also * set it up so that the next "real" movement will return the * cursor to the closest position to the last real movement. */ if (echanged) { rp->lno = smp->lno; rp->cno = vs_colpos(sp, smp->lno, (O_ISSET(sp, O_LEFTRIGHT) ? smp->coff : (smp->soff - 1) * sp->cols) + sp->rcm % sp->cols); } return (0); case CNTRL_F: /* * If there are more lines, the ^F command is positioned at * the first line of the screen. */ if (!count) { smp = HMAP; break; } /* FALLTHROUGH */ case CNTRL_D: /* * The ^D and ^F commands move the cursor towards EOF * if there are more lines to move. Check to be sure * the lines actually exist. (They may not if the * file is smaller than the screen.) */ for (; count; --count, ++smp) if (smp == TMAP || !db_exist(sp, smp[1].lno)) break; break; case Z_PLUS: /* The z+ command moves the cursor to the first new line. */ break; default: abort(); } if (!SMAP_CACHE(smp) && vs_line(sp, smp, NULL, NULL)) return (1); rp->lno = smp->lno; rp->cno = smp->c_sboff; return (0); } /* * vs_sm_1up -- * Scroll the SMAP up one. * * PUBLIC: int vs_sm_1up __P((SCR *)); */ int vs_sm_1up(sp) SCR *sp; { /* * Delete the top line of the screen. Shift the screen map * up and display a new line at the bottom of the screen. */ (void)sp->gp->scr_move(sp, 0, 0); if (vs_deleteln(sp, 1)) return (1); /* One-line screens can fail. */ if (IS_ONELINE(sp)) { if (vs_sm_next(sp, TMAP, TMAP)) return (1); } else { memmove(HMAP, HMAP + 1, (sp->rows - 1) * sizeof(SMAP)); if (vs_sm_next(sp, TMAP - 1, TMAP)) return (1); } /* vs_sm_next() flushed the cache. */ return (vs_line(sp, TMAP, NULL, NULL)); } /* * vs_deleteln -- * Delete a line a la curses, make sure to put the information * line and other screens back. */ static int vs_deleteln(sp, cnt) SCR *sp; int cnt; { GS *gp; size_t oldy, oldx; gp = sp->gp; if (IS_ONELINE(sp)) (void)gp->scr_clrtoeol(sp); else { (void)gp->scr_cursor(sp, &oldy, &oldx); while (cnt--) { (void)gp->scr_deleteln(sp); (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_insertln(sp); (void)gp->scr_move(sp, oldy, oldx); } } return (0); } /* * vs_sm_down -- * Scroll the SMAP down count logical lines. */ static int vs_sm_down(sp, rp, count, scmd, smp) SCR *sp; MARK *rp; recno_t count; SMAP *smp; scroll_t scmd; { SMAP *ssmp, s1, s2; int cursor_set, ychanged, zset; /* Check to see if movement is possible. */ if (HMAP->lno == 1 && (O_ISSET(sp, O_LEFTRIGHT) || HMAP->soff == 1) && (scmd == CNTRL_Y || scmd == Z_CARAT || smp == HMAP)) { v_sof(sp, NULL); return (1); } /* * Small screens: see vs_refresh.c section 6a. * * If it's a small screen, and the movement isn't larger than a * screen, i.e some context will remain, open up the screen and * display by scrolling. In this case, the cursor moves up one * line for each line displayed. Otherwise, erase/compress and * repaint, and move the cursor to the first line in the screen. * Note, the ^B command is always in the latter case, for historical * reasons. */ cursor_set = scmd == CNTRL_Y; if (IS_SMALL(sp)) { if (count >= sp->t_maxrows || scmd == CNTRL_B) { s1 = HMAP[0]; if (vs_sm_erase(sp)) return (1); for (; count--; s1 = s2) { if (vs_sm_prev(sp, &s1, &s2)) return (1); if (s2.lno == 1 && (O_ISSET(sp, O_LEFTRIGHT) || s2.soff == 1)) break; } HMAP[0] = s2; if (vs_sm_fill(sp, OOBLNO, P_TOP)) return (1); return (vs_sm_position(sp, rp, 0, P_BOTTOM)); } cursor_set = scmd == CNTRL_Y || vs_sm_cursor(sp, &ssmp); for (; count && sp->t_rows != sp->t_maxrows; --count, ++sp->t_rows) { if (HMAP->lno == 1 && (O_ISSET(sp, O_LEFTRIGHT) || HMAP->soff == 1)) break; ++TMAP; if (vs_sm_1down(sp)) return (1); } if (!cursor_set) { rp->lno = ssmp->lno; rp->cno = ssmp->c_sboff; } if (count == 0) return (0); } for (ychanged = zset = 0; count; --count) { /* If the line doesn't exist, we're done. */ if (HMAP->lno == 1 && (O_ISSET(sp, O_LEFTRIGHT) || HMAP->soff == 1)) break; /* Scroll the screen and cursor down one logical line. */ if (vs_sm_1down(sp)) return (1); switch (scmd) { case CNTRL_Y: if (smp < TMAP) ++smp; else ychanged = 1; break; case Z_CARAT: if (zset) { if (smp < TMAP) ++smp; } else { smp = HMAP; zset = 1; } /* FALLTHROUGH */ default: break; } } if (scmd != CNTRL_Y && cursor_set) return(0); switch (scmd) { case CNTRL_B: /* * If there are more lines, the ^B command is positioned at * the last line of the screen. However, the line may not * exist. */ if (!count) { for (smp = TMAP; smp > HMAP; --smp) if (db_exist(sp, smp->lno)) break; break; } /* FALLTHROUGH */ case CNTRL_U: /* * The ^B and ^U commands move the cursor towards SOF * if there are more lines to move. */ if (count < smp - HMAP) smp -= count; else smp = HMAP; break; case CNTRL_Y: /* * On a ^Y that was forced to change lines, try and keep the * cursor as close as possible to the last position, but also * set it up so that the next "real" movement will return the * cursor to the closest position to the last real movement. */ if (ychanged) { rp->lno = smp->lno; rp->cno = vs_colpos(sp, smp->lno, (O_ISSET(sp, O_LEFTRIGHT) ? smp->coff : (smp->soff - 1) * sp->cols) + sp->rcm % sp->cols); } return (0); case Z_CARAT: /* The z^ command moves the cursor to the first new line. */ break; default: abort(); } if (!SMAP_CACHE(smp) && vs_line(sp, smp, NULL, NULL)) return (1); rp->lno = smp->lno; rp->cno = smp->c_sboff; return (0); } /* * vs_sm_erase -- * Erase the small screen area for the scrolling functions. */ static int vs_sm_erase(sp) SCR *sp; { GS *gp; gp = sp->gp; (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_clrtoeol(sp); for (; sp->t_rows > sp->t_minrows; --sp->t_rows, --TMAP) { (void)gp->scr_move(sp, TMAP - HMAP, 0); (void)gp->scr_clrtoeol(sp); } return (0); } /* * vs_sm_1down -- * Scroll the SMAP down one. * * PUBLIC: int vs_sm_1down __P((SCR *)); */ int vs_sm_1down(sp) SCR *sp; { /* * Insert a line at the top of the screen. Shift the screen map * down and display a new line at the top of the screen. */ (void)sp->gp->scr_move(sp, 0, 0); if (vs_insertln(sp, 1)) return (1); /* One-line screens can fail. */ if (IS_ONELINE(sp)) { if (vs_sm_prev(sp, HMAP, HMAP)) return (1); } else { memmove(HMAP + 1, HMAP, (sp->rows - 1) * sizeof(SMAP)); if (vs_sm_prev(sp, HMAP + 1, HMAP)) return (1); } /* vs_sm_prev() flushed the cache. */ return (vs_line(sp, HMAP, NULL, NULL)); } /* * vs_insertln -- * Insert a line a la curses, make sure to put the information * line and other screens back. */ static int vs_insertln(sp, cnt) SCR *sp; int cnt; { GS *gp; size_t oldy, oldx; gp = sp->gp; if (IS_ONELINE(sp)) { (void)gp->scr_move(sp, LASTLINE(sp), 0); (void)gp->scr_clrtoeol(sp); } else { (void)gp->scr_cursor(sp, &oldy, &oldx); while (cnt--) { (void)gp->scr_move(sp, LASTLINE(sp) - 1, 0); (void)gp->scr_deleteln(sp); (void)gp->scr_move(sp, oldy, oldx); (void)gp->scr_insertln(sp); } } return (0); } /* * vs_sm_next -- * Fill in the next entry in the SMAP. * * PUBLIC: int vs_sm_next __P((SCR *, SMAP *, SMAP *)); */ int vs_sm_next(sp, p, t) SCR *sp; SMAP *p, *t; { size_t lcnt; SMAP_FLUSH(t); if (O_ISSET(sp, O_LEFTRIGHT)) { t->lno = p->lno + 1; t->coff = p->coff; } else { lcnt = vs_screens(sp, p->lno, NULL); if (lcnt == p->soff) { t->lno = p->lno + 1; t->soff = 1; } else { t->lno = p->lno; t->soff = p->soff + 1; } } return (0); } /* * vs_sm_prev -- * Fill in the previous entry in the SMAP. * * PUBLIC: int vs_sm_prev __P((SCR *, SMAP *, SMAP *)); */ int vs_sm_prev(sp, p, t) SCR *sp; SMAP *p, *t; { SMAP_FLUSH(t); if (O_ISSET(sp, O_LEFTRIGHT)) { t->lno = p->lno - 1; t->coff = p->coff; } else { if (p->soff != 1) { t->lno = p->lno; t->soff = p->soff - 1; } else { t->lno = p->lno - 1; t->soff = vs_screens(sp, t->lno, NULL); } } return (t->lno == 0); } /* * vs_sm_cursor -- * Return the SMAP entry referenced by the cursor. * * PUBLIC: int vs_sm_cursor __P((SCR *, SMAP **)); */ int vs_sm_cursor(sp, smpp) SCR *sp; SMAP **smpp; { SMAP *p; /* See if the cursor is not in the map. */ if (sp->lno < HMAP->lno || sp->lno > TMAP->lno) return (1); /* Find the first occurence of the line. */ for (p = HMAP; p->lno != sp->lno; ++p); /* Fill in the map information until we find the right line. */ for (; p <= TMAP; ++p) { /* Short lines are common and easy to detect. */ if (p != TMAP && (p + 1)->lno != p->lno) { *smpp = p; return (0); } if (!SMAP_CACHE(p) && vs_line(sp, p, NULL, NULL)) return (1); if (p->c_eboff >= sp->cno) { *smpp = p; return (0); } } /* It was past the end of the map after all. */ return (1); } /* * vs_sm_position -- * Return the line/column of the top, middle or last line on the screen. * (The vi H, M and L commands.) Here because only the screen routines * know what's really out there. * * PUBLIC: int vs_sm_position __P((SCR *, MARK *, u_long, pos_t)); */ int vs_sm_position(sp, rp, cnt, pos) SCR *sp; MARK *rp; u_long cnt; pos_t pos; { SMAP *smp; recno_t last; switch (pos) { case P_TOP: /* * !!! * Historically, an invalid count to the H command failed. * We do nothing special here, just making sure that H in * an empty screen works. */ if (cnt > TMAP - HMAP) goto sof; smp = HMAP + cnt; if (cnt && !db_exist(sp, smp->lno)) { sof: msgq(sp, M_BERR, "220|Movement past the end-of-screen"); return (1); } break; case P_MIDDLE: /* * !!! * Historically, a count to the M command was ignored. * If the screen isn't filled, find the middle of what's * real and move there. */ if (!db_exist(sp, TMAP->lno)) { if (db_last(sp, &last)) return (1); for (smp = TMAP; smp->lno > last && smp > HMAP; --smp); if (smp > HMAP) smp -= (smp - HMAP) / 2; } else smp = (HMAP + (TMAP - HMAP) / 2) + cnt; break; case P_BOTTOM: /* * !!! * Historically, an invalid count to the L command failed. * If the screen isn't filled, find the bottom of what's * real and try to offset from there. */ if (cnt > TMAP - HMAP) goto eof; smp = TMAP - cnt; if (!db_exist(sp, smp->lno)) { if (db_last(sp, &last)) return (1); for (; smp->lno > last && smp > HMAP; --smp); if (cnt > smp - HMAP) { eof: msgq(sp, M_BERR, "221|Movement past the beginning-of-screen"); return (1); } smp -= cnt; } break; default: abort(); } /* Make sure that the cached information is valid. */ if (!SMAP_CACHE(smp) && vs_line(sp, smp, NULL, NULL)) return (1); rp->lno = smp->lno; rp->cno = smp->c_sboff; return (0); } /* * vs_sm_nlines -- * Return the number of screen lines from an SMAP entry to the * start of some file line, less than a maximum value. * * PUBLIC: recno_t vs_sm_nlines __P((SCR *, SMAP *, recno_t, size_t)); */ recno_t vs_sm_nlines(sp, from_sp, to_lno, max) SCR *sp; SMAP *from_sp; recno_t to_lno; size_t max; { recno_t lno, lcnt; if (O_ISSET(sp, O_LEFTRIGHT)) return (from_sp->lno > to_lno ? from_sp->lno - to_lno : to_lno - from_sp->lno); if (from_sp->lno == to_lno) return (from_sp->soff - 1); if (from_sp->lno > to_lno) { lcnt = from_sp->soff - 1; /* Correct for off-by-one. */ for (lno = from_sp->lno; --lno >= to_lno && lcnt <= max;) lcnt += vs_screens(sp, lno, NULL); } else { lno = from_sp->lno; lcnt = (vs_screens(sp, lno, NULL) - from_sp->soff) + 1; for (; ++lno < to_lno && lcnt <= max;) lcnt += vs_screens(sp, lno, NULL); } return (lcnt); } vigor-0.016.orig/vi/vs_split.c0100644000076400007640000003377407103707241014732 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)vs_split.c 10.31 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" static SCR *vs_getbg __P((SCR *, char *)); /* * vs_split -- * Create a new screen. * * PUBLIC: int vs_split __P((SCR *, SCR *, int)); */ int vs_split(sp, new, ccl) SCR *sp, *new; int ccl; /* Colon-command line split. */ { GS *gp; SMAP *smp; size_t half; int issmallscreen, splitup; gp = sp->gp; /* Check to see if it's possible. */ /* XXX: The IS_ONELINE fix will change this, too. */ if (sp->rows < 4) { msgq(sp, M_ERR, "222|Screen must be larger than %d lines to split", 4 - 1); return (1); } /* Wait for any messages in the screen. */ vs_resolve(sp, NULL, 1); half = sp->rows / 2; if (ccl && half > 6) half = 6; /* Get a new screen map. */ CALLOC(sp, _HMAP(new), SMAP *, SIZE_HMAP(sp), sizeof(SMAP)); if (_HMAP(new) == NULL) return (1); _HMAP(new)->lno = sp->lno; _HMAP(new)->coff = 0; _HMAP(new)->soff = 1; /* * Small screens: see vs_refresh.c section 6a. Set a flag so * we know to fix the screen up later. */ issmallscreen = IS_SMALL(sp); /* The columns in the screen don't change. */ new->cols = sp->cols; /* * Split the screen, and link the screens together. If creating a * screen to edit the colon command line or the cursor is in the top * half of the current screen, the new screen goes under the current * screen. Else, it goes above the current screen. * * Recalculate current cursor position based on sp->lno, we're called * with the cursor on the colon command line. Then split the screen * in half and update the shared information. */ splitup = !ccl && (vs_sm_cursor(sp, &smp) ? 0 : (smp - HMAP) + 1) >= half; if (splitup) { /* Old is bottom half. */ new->rows = sp->rows - half; /* New. */ new->woff = sp->woff; sp->rows = half; /* Old. */ sp->woff += new->rows; /* Link in before old. */ CIRCLEQ_INSERT_BEFORE(&gp->dq, sp, new, q); /* * If the parent is the bottom half of the screen, shift * the map down to match on-screen text. */ memmove(_HMAP(sp), _HMAP(sp) + new->rows, (sp->t_maxrows - new->rows) * sizeof(SMAP)); } else { /* Old is top half. */ new->rows = half; /* New. */ sp->rows -= half; /* Old. */ new->woff = sp->woff + sp->rows; /* Link in after old. */ CIRCLEQ_INSERT_AFTER(&gp->dq, sp, new, q); } /* Adjust maximum text count. */ sp->t_maxrows = IS_ONELINE(sp) ? 1 : sp->rows - 1; new->t_maxrows = IS_ONELINE(new) ? 1 : new->rows - 1; /* * Small screens: see vs_refresh.c, section 6a. * * The child may have different screen options sizes than the parent, * so use them. Guarantee that text counts aren't larger than the * new screen sizes. */ if (issmallscreen) { /* Fix the text line count for the parent. */ if (splitup) sp->t_rows -= new->rows; /* Fix the parent screen. */ if (sp->t_rows > sp->t_maxrows) sp->t_rows = sp->t_maxrows; if (sp->t_minrows > sp->t_maxrows) sp->t_minrows = sp->t_maxrows; /* Fix the child screen. */ new->t_minrows = new->t_rows = O_VAL(sp, O_WINDOW); if (new->t_rows > new->t_maxrows) new->t_rows = new->t_maxrows; if (new->t_minrows > new->t_maxrows) new->t_minrows = new->t_maxrows; } else { sp->t_minrows = sp->t_rows = IS_ONELINE(sp) ? 1 : sp->rows - 1; /* * The new screen may be a small screen, even if the parent * was not. Don't complain if O_WINDOW is too large, we're * splitting the screen so the screen is much smaller than * normal. */ new->t_minrows = new->t_rows = O_VAL(sp, O_WINDOW); if (new->t_rows > new->rows - 1) new->t_minrows = new->t_rows = IS_ONELINE(new) ? 1 : new->rows - 1; } /* Adjust the ends of the new and old maps. */ _TMAP(sp) = IS_ONELINE(sp) ? _HMAP(sp) : _HMAP(sp) + (sp->t_rows - 1); _TMAP(new) = IS_ONELINE(new) ? _HMAP(new) : _HMAP(new) + (new->t_rows - 1); /* Reset the length of the default scroll. */ if ((sp->defscroll = sp->t_maxrows / 2) == 0) sp->defscroll = 1; if ((new->defscroll = new->t_maxrows / 2) == 0) new->defscroll = 1; /* * Initialize the screen flags: * * If we're in vi mode in one screen, we don't have to reinitialize. * This isn't just a cosmetic fix. The path goes like this: * * return into vi(), SC_SSWITCH set * call vs_refresh() with SC_STATUS set * call vs_resolve to display the status message * call vs_refresh() because the SC_SCR_VI bit isn't set * * Things go downhill at this point. * * Draw the new screen from scratch, and add a status line. */ F_SET(new, SC_SCR_REFORMAT | SC_STATUS | F_ISSET(sp, SC_EX | SC_VI | SC_SCR_VI | SC_SCR_EX)); return (0); } /* * vs_discard -- * Discard the screen, folding the real-estate into a related screen, * if one exists, and return that screen. * * PUBLIC: int vs_discard __P((SCR *, SCR **)); */ int vs_discard(sp, spp) SCR *sp, **spp; { SCR *nsp; dir_t dir; /* * Save the old screen's cursor information. * * XXX * If called after file_end(), and the underlying file was a tmp * file, it may have gone away. */ if (sp->frp != NULL) { sp->frp->lno = sp->lno; sp->frp->cno = sp->cno; F_SET(sp->frp, FR_CURSORSET); } /* * Add into a previous screen and then into a subsequent screen, as * they're the closest to the current screen. If that doesn't work, * there was no screen to join. */ if ((nsp = sp->q.cqe_prev) != (void *)&sp->gp->dq) { nsp->rows += sp->rows; sp = nsp; dir = FORWARD; } else if ((nsp = sp->q.cqe_next) != (void *)&sp->gp->dq) { nsp->woff = sp->woff; nsp->rows += sp->rows; sp = nsp; dir = BACKWARD; } else sp = NULL; if (spp != NULL) *spp = sp; if (sp == NULL) return (0); /* * Make no effort to clean up the discarded screen's information. If * it's not exiting, we'll do the work when the user redisplays it. * * Small screens: see vs_refresh.c section 6a. Adjust text line info, * unless it's a small screen. * * Reset the length of the default scroll. */ if (!IS_SMALL(sp)) sp->t_rows = sp->t_minrows = sp->rows - 1; sp->t_maxrows = sp->rows - 1; sp->defscroll = sp->t_maxrows / 2; *(HMAP + (sp->t_rows - 1)) = *TMAP; TMAP = HMAP + (sp->t_rows - 1); /* * Draw the new screen from scratch, and add a status line. * * XXX * We could play games with the map, if this were ever to be a * performance problem, but I wrote the code a few times and it * was never clean or easy. */ switch (dir) { case FORWARD: vs_sm_fill(sp, OOBLNO, P_TOP); break; case BACKWARD: vs_sm_fill(sp, OOBLNO, P_BOTTOM); break; default: abort(); } F_SET(sp, SC_STATUS); return (0); } /* * vs_fg -- * Background the current screen, and foreground a new one. * * PUBLIC: int vs_fg __P((SCR *, SCR **, CHAR_T *, int)); */ int vs_fg(sp, nspp, name, newscreen) SCR *sp, **nspp; CHAR_T *name; int newscreen; { GS *gp; SCR *nsp; gp = sp->gp; if (newscreen) /* Get the specified background screen. */ nsp = vs_getbg(sp, name); else /* Swap screens. */ if (vs_swap(sp, &nsp, name)) return (1); if ((*nspp = nsp) == NULL) { msgq_str(sp, M_ERR, name, name == NULL ? "223|There are no background screens" : "224|There's no background screen editing a file named %s"); return (1); } if (newscreen) { /* Remove the new screen from the background queue. */ CIRCLEQ_REMOVE(&gp->hq, nsp, q); /* Split the screen; if we fail, hook the screen back in. */ if (vs_split(sp, nsp, 0)) { CIRCLEQ_INSERT_TAIL(&gp->hq, nsp, q); return (1); } } else { /* Move the old screen to the background queue. */ CIRCLEQ_REMOVE(&gp->dq, sp, q); CIRCLEQ_INSERT_TAIL(&gp->hq, sp, q); } return (0); } /* * vs_bg -- * Background the screen, and switch to the next one. * * PUBLIC: int vs_bg __P((SCR *)); */ int vs_bg(sp) SCR *sp; { GS *gp; SCR *nsp; gp = sp->gp; /* Try and join with another screen. */ if (vs_discard(sp, &nsp)) return (1); if (nsp == NULL) { msgq(sp, M_ERR, "225|You may not background your only displayed screen"); return (1); } /* Move the old screen to the background queue. */ CIRCLEQ_REMOVE(&gp->dq, sp, q); CIRCLEQ_INSERT_TAIL(&gp->hq, sp, q); /* Toss the screen map. */ free(_HMAP(sp)); _HMAP(sp) = NULL; /* Switch screens. */ sp->nextdisp = nsp; F_SET(sp, SC_SSWITCH); return (0); } /* * vs_swap -- * Swap the current screen with a backgrounded one. * * PUBLIC: int vs_swap __P((SCR *, SCR **, char *)); */ int vs_swap(sp, nspp, name) SCR *sp, **nspp; char *name; { GS *gp; SCR *nsp; gp = sp->gp; /* Get the specified background screen. */ if ((*nspp = nsp = vs_getbg(sp, name)) == NULL) return (0); /* * Save the old screen's cursor information. * * XXX * If called after file_end(), and the underlying file was a tmp * file, it may have gone away. */ if (sp->frp != NULL) { sp->frp->lno = sp->lno; sp->frp->cno = sp->cno; F_SET(sp->frp, FR_CURSORSET); } /* Switch screens. */ sp->nextdisp = nsp; F_SET(sp, SC_SSWITCH); /* Initialize terminal information. */ VIP(nsp)->srows = VIP(sp)->srows; /* Initialize screen information. */ nsp->cols = sp->cols; nsp->rows = sp->rows; /* XXX: Only place in vi that sets rows. */ nsp->woff = sp->woff; /* * Small screens: see vs_refresh.c, section 6a. * * The new screens may have different screen options sizes than the * old one, so use them. Make sure that text counts aren't larger * than the new screen sizes. */ if (IS_SMALL(nsp)) { nsp->t_minrows = nsp->t_rows = O_VAL(nsp, O_WINDOW); if (nsp->t_rows > sp->t_maxrows) nsp->t_rows = nsp->t_maxrows; if (nsp->t_minrows > sp->t_maxrows) nsp->t_minrows = nsp->t_maxrows; } else nsp->t_rows = nsp->t_maxrows = nsp->t_minrows = nsp->rows - 1; /* Reset the length of the default scroll. */ nsp->defscroll = nsp->t_maxrows / 2; /* Allocate a new screen map. */ CALLOC_RET(nsp, _HMAP(nsp), SMAP *, SIZE_HMAP(nsp), sizeof(SMAP)); _TMAP(nsp) = _HMAP(nsp) + (nsp->t_rows - 1); /* Fill the map. */ if (vs_sm_fill(nsp, nsp->lno, P_FILL)) return (1); /* * The new screen replaces the old screen in the parent/child list. * We insert the new screen after the old one. If we're exiting, * the exit will delete the old one, if we're foregrounding, the fg * code will move the old one to the background queue. */ CIRCLEQ_REMOVE(&gp->hq, nsp, q); CIRCLEQ_INSERT_AFTER(&gp->dq, sp, nsp, q); /* * Don't change the screen's cursor information other than to * note that the cursor is wrong. */ F_SET(VIP(nsp), VIP_CUR_INVALID); /* Draw the new screen from scratch, and add a status line. */ F_SET(nsp, SC_SCR_REDRAW | SC_STATUS); return (0); } /* * vs_resize -- * Change the absolute size of the current screen. * * PUBLIC: int vs_resize __P((SCR *, long, adj_t)); */ int vs_resize(sp, count, adj) SCR *sp; long count; adj_t adj; { GS *gp; SCR *g, *s; size_t g_off, s_off; gp = sp->gp; /* * Figure out which screens will grow, which will shrink, and * make sure it's possible. */ if (count == 0) return (0); if (adj == A_SET) { if (sp->t_maxrows == count) return (0); if (sp->t_maxrows > count) { adj = A_DECREASE; count = sp->t_maxrows - count; } else { adj = A_INCREASE; count = count - sp->t_maxrows; } } g_off = s_off = 0; if (adj == A_DECREASE) { if (count < 0) count = -count; s = sp; if (s->t_maxrows < MINIMUM_SCREEN_ROWS + count) goto toosmall; if ((g = sp->q.cqe_prev) == (void *)&gp->dq) { if ((g = sp->q.cqe_next) == (void *)&gp->dq) goto toobig; g_off = -count; } else s_off = count; } else { g = sp; if ((s = sp->q.cqe_next) != (void *)&gp->dq) if (s->t_maxrows < MINIMUM_SCREEN_ROWS + count) s = NULL; else s_off = count; else s = NULL; if (s == NULL) { if ((s = sp->q.cqe_prev) == (void *)&gp->dq) { toobig: msgq(sp, M_BERR, adj == A_DECREASE ? "227|The screen cannot shrink" : "228|The screen cannot grow"); return (1); } if (s->t_maxrows < MINIMUM_SCREEN_ROWS + count) { toosmall: msgq(sp, M_BERR, "226|The screen can only shrink to %d rows", MINIMUM_SCREEN_ROWS); return (1); } g_off = -count; } } /* * Fix up the screens; we could optimize the reformatting of the * screen, but this isn't likely to be a common enough operation * to make it worthwhile. */ s->rows += -count; s->woff += s_off; g->rows += count; g->woff += g_off; g->t_rows += count; if (g->t_minrows == g->t_maxrows) g->t_minrows += count; g->t_maxrows += count; _TMAP(g) += count; F_SET(g, SC_SCR_REFORMAT | SC_STATUS); s->t_rows -= count; s->t_maxrows -= count; if (s->t_minrows > s->t_maxrows) s->t_minrows = s->t_maxrows; _TMAP(s) -= count; F_SET(s, SC_SCR_REFORMAT | SC_STATUS); return (0); } /* * vs_getbg -- * Get the specified background screen, or, if name is NULL, the first * background screen. */ static SCR * vs_getbg(sp, name) SCR *sp; char *name; { GS *gp; SCR *nsp; char *p; gp = sp->gp; /* If name is NULL, return the first background screen on the list. */ if (name == NULL) { nsp = gp->hq.cqh_first; return (nsp == (void *)&gp->hq ? NULL : nsp); } /* Search for a full match. */ for (nsp = gp->hq.cqh_first; nsp != (void *)&gp->hq; nsp = nsp->q.cqe_next) if (!strcmp(nsp->frp->name, name)) break; if (nsp != (void *)&gp->hq) return (nsp); /* Search for a last-component match. */ for (nsp = gp->hq.cqh_first; nsp != (void *)&gp->hq; nsp = nsp->q.cqe_next) { if ((p = strrchr(nsp->frp->name, '/')) == NULL) p = nsp->frp->name; else ++p; if (!strcmp(p, name)) break; } if (nsp != (void *)&gp->hq) return (nsp); return (NULL); } vigor-0.016.orig/vi/.#v_xchar.c0120777000076400007640000000000007107504605022777 2joelh@detlev.piqnet.org.75065:954875878ustar cjw44cjw44vigor-0.016.orig/vi/#v_xchar.c#0100644000076400007640000000542207103707241014614 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)v_xchar.c 10.9 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * v_xchar -- [buffer] [count]x * Deletes the character(s) on which the cursor sits. * * PUBLIC: int v_xchar __P((SCR *, VICMD *)); */ int v_xchar(sp, vp) SCR *sp; VICMD *vp; { size_t len; int isempty; /* Yes, this does not describe counts. Remember that the * omission of such details also plagues other products' * similar systems. */ vigor_maybe_wizard((F_ISSET(vp, VC_C1SET) ? (vp->count > 33 ? 100 : vp->count * 3): 3), "\"deleting text\"", "\"delete a character\"", "\"delete a word\"", "\"delete a line\"", 0, "\"To delete a character, you need to press the " "delete character key. If you need to delete " "several characters, press the delete character " "key several times.\"", sp->gp); if (db_eget(sp, vp->m_start.lno, NULL, &len, &isempty)) { if (isempty) goto nodel; return (1); } if (len == 0) { nodel: msgq(sp, M_BERR, "206|No characters to delete"); return (1); } /* * Delete from the cursor toward the end of line, w/o moving the * cursor. * * !!! * Note, "2x" at EOL isn't the same as "xx" because the left movement * of the cursor as part of the 'x' command isn't taken into account. * Historically correct. */ if (F_ISSET(vp, VC_C1SET)) vp->m_stop.cno += vp->count - 1; if (vp->m_stop.cno >= len - 1) { vp->m_stop.cno = len - 1; vp->m_final.cno = vp->m_start.cno ? vp->m_start.cno - 1 : 0; } else vp->m_final.cno = vp->m_start.cno; if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, 0)) return (1); return (del(sp, &vp->m_start, &vp->m_stop, 0)); } /* * v_Xchar -- [buffer] [count]X * Deletes the character(s) immediately before the current cursor * position. * * PUBLIC: int v_Xchar __P((SCR *, VICMD *)); */ int v_Xchar(sp, vp) SCR *sp; VICMD *vp; { u_long cnt; if (vp->m_start.cno == 0) { v_sol(sp); return (1); } cnt = F_ISSET(vp, VC_C1SET) ? vp->count : 1; if (cnt >= vp->m_start.cno) vp->m_start.cno = 0; else vp->m_start.cno -= cnt; --vp->m_stop.cno; vp->m_final.cno = vp->m_start.cno; if (cut(sp, F_ISSET(vp, VC_BUFFER) ? &vp->buffer : NULL, &vp->m_start, &vp->m_stop, 0)) return (1); return (del(sp, &vp->m_start, &vp->m_stop, 0)); } vigor-0.016.orig/vi/getc.c0100644000076400007640000001124707103707242014001 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)getc.c 10.10 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" #include "vi.h" /* * Character stream routines -- * These routines return the file a character at a time. There are two * special cases. First, the end of a line, end of a file, start of a * file and empty lines are returned as special cases, and no character * is returned. Second, empty lines include lines that have only white * space in them, because the vi search functions don't care about white * space, and this makes it easier for them to be consistent. */ /* * cs_init -- * Initialize character stream routines. * * PUBLIC: int cs_init __P((SCR *, VCS *)); */ int cs_init(sp, csp) SCR *sp; VCS *csp; { int isempty; if (db_eget(sp, csp->cs_lno, &csp->cs_bp, &csp->cs_len, &isempty)) { if (isempty) msgq(sp, M_BERR, "177|Empty file"); return (1); } if (csp->cs_len == 0 || v_isempty(csp->cs_bp, csp->cs_len)) { csp->cs_cno = 0; csp->cs_flags = CS_EMP; } else { csp->cs_flags = 0; csp->cs_ch = csp->cs_bp[csp->cs_cno]; } return (0); } /* * cs_next -- * Retrieve the next character. * * PUBLIC: int cs_next __P((SCR *, VCS *)); */ int cs_next(sp, csp) SCR *sp; VCS *csp; { char *p; switch (csp->cs_flags) { case CS_EMP: /* EMP; get next line. */ case CS_EOL: /* EOL; get next line. */ if (db_get(sp, ++csp->cs_lno, 0, &p, &csp->cs_len)) { --csp->cs_lno; csp->cs_flags = CS_EOF; } else { csp->cs_bp = p; if (csp->cs_len == 0 || v_isempty(csp->cs_bp, csp->cs_len)) { csp->cs_cno = 0; csp->cs_flags = CS_EMP; } else { csp->cs_flags = 0; csp->cs_ch = csp->cs_bp[csp->cs_cno = 0]; } } break; case 0: if (csp->cs_cno == csp->cs_len - 1) csp->cs_flags = CS_EOL; else csp->cs_ch = csp->cs_bp[++csp->cs_cno]; break; case CS_EOF: /* EOF. */ break; default: abort(); /* NOTREACHED */ } return (0); } /* * cs_fspace -- * If on a space, eat forward until something other than a * whitespace character. * * XXX * Semantics of checking the current character were coded for the fword() * function -- once the other word routines are converted, they may have * to change. * * PUBLIC: int cs_fspace __P((SCR *, VCS *)); */ int cs_fspace(sp, csp) SCR *sp; VCS *csp; { if (csp->cs_flags != 0 || !isblank(csp->cs_ch)) return (0); for (;;) { if (cs_next(sp, csp)) return (1); if (csp->cs_flags != 0 || !isblank(csp->cs_ch)) break; } return (0); } /* * cs_fblank -- * Eat forward to the next non-whitespace character. * * PUBLIC: int cs_fblank __P((SCR *, VCS *)); */ int cs_fblank(sp, csp) SCR *sp; VCS *csp; { for (;;) { if (cs_next(sp, csp)) return (1); if (csp->cs_flags == CS_EOL || csp->cs_flags == CS_EMP || csp->cs_flags == 0 && isblank(csp->cs_ch)) continue; break; } return (0); } /* * cs_prev -- * Retrieve the previous character. * * PUBLIC: int cs_prev __P((SCR *, VCS *)); */ int cs_prev(sp, csp) SCR *sp; VCS *csp; { switch (csp->cs_flags) { case CS_EMP: /* EMP; get previous line. */ case CS_EOL: /* EOL; get previous line. */ if (csp->cs_lno == 1) { /* SOF. */ csp->cs_flags = CS_SOF; break; } if (db_get(sp, /* The line should exist. */ --csp->cs_lno, DBG_FATAL, &csp->cs_bp, &csp->cs_len)) { ++csp->cs_lno; return (1); } if (csp->cs_len == 0 || v_isempty(csp->cs_bp, csp->cs_len)) { csp->cs_cno = 0; csp->cs_flags = CS_EMP; } else { csp->cs_flags = 0; csp->cs_cno = csp->cs_len - 1; csp->cs_ch = csp->cs_bp[csp->cs_cno]; } break; case CS_EOF: /* EOF: get previous char. */ case 0: if (csp->cs_cno == 0) if (csp->cs_lno == 1) csp->cs_flags = CS_SOF; else csp->cs_flags = CS_EOL; else csp->cs_ch = csp->cs_bp[--csp->cs_cno]; break; case CS_SOF: /* SOF. */ break; default: abort(); /* NOTREACHED */ } return (0); } /* * cs_bblank -- * Eat backward to the next non-whitespace character. * * PUBLIC: int cs_bblank __P((SCR *, VCS *)); */ int cs_bblank(sp, csp) SCR *sp; VCS *csp; { for (;;) { if (cs_prev(sp, csp)) return (1); if (csp->cs_flags == CS_EOL || csp->cs_flags == CS_EMP || csp->cs_flags == 0 && isblank(csp->cs_ch)) continue; break; } return (0); } vigor-0.016.orig/docs/0040755000076400007640000000000007103707245013226 5ustar cjw44cjw44vigor-0.016.orig/docs/interp/0040755000076400007640000000000007103707242014524 5ustar cjw44cjw44vigor-0.016.orig/docs/interp/interp0100644000076400007640000001364207103707242015753 0ustar cjw44cjw44# @(#)interp 8.5 (Berkeley) 10/19/96 Nvi Interpreter API Introduction: The intention is to provide a way to graft a fairly generic extension language into nvi. I think that the obvious candidates are Tcl/Rush, Scheme, Python and Perl. Since the interpretation language chosen is often a religious issue, the method should be as flexible as possible. I don't expect to rewrite the editor in the interpreted language, so that isn't a consideration. Q: Is there any reason for nvi to support multiple interpreters in a single executable? Interpreter functions in nvi: 1: Function to get the current screen pointer. SCR *inter_screen(); Return a pointer to the current screen. 2: Functions to execute both ex and vi commands. The return value of the function will be success/failure. The editor itself will continue to handle the display of all messages and text for the foreseeable future. int inter_vicmd(SCR *, char *cmds, size_t len); int inter_excmd(SCR *, char *cmds, size_t len); The byte string cmds, of length len, is entered into the standard vi or ex parser, as if typed by the user. The characters are not mapped in any way, i.e. the user's vi mappings don't apply. If any error occurs, an error value is returned, and the rest of the characters are discarded. 3: Functions to handle lines of text in the file. int inter_gline(SCR *, recno_t lno, char **lp, size_t *lenp); Return a pointer to the text of the line lno, into the location referenced by lp, and its length into the location referenced by lenp. int inter_dline(SCR *, recno_t lno); Delete the line lno from the file. int inter_aline(SCR *, recno_t lno, char *lp, size_t len); Append a line consisting of the len bytes of text referenced by lp to the line lno. int inter_iline(SCR *, recno_t lno, char *lp, size_t len); Insert a line consisting of the len bytes of text referenced by lp before the line lno. int inter_sline(SCR *, recno_t lno, char *lp, size_t len); Replace line lno with the len bytes of text referenced by lp. int inter_lline(SCR *, recno_t *lnop); Return the number of the last line in the file in the location referenced by lnop. 4: Function to post an error message to the user. int inter_msgq(SCR *, enum msgtype, char *fmt, ...); Display the message for the user. Valid message types are: M_BERR Error: M_ERR if verbose, else bell. M_ERR Error: Display in inverse video. M_INFO Info: Display in normal video. M_SYSERR Error: M_ERR, using strerror(3) message. M_VINFO Info: M_INFO if verbose, else ignore. 5: Function to manipulate cut buffers. int inter_setbuf(SCR *, CHAR_T buffer); Create the specified buffer if it does not exist (the buffer will have no contents). int inter_getbuf(SCR *, CHAR_T buffer, TEXT **textp); Return a pointer to the specified buffer in the location referenced by textp. (Since a pointer to the real item is being returned, it can be manipulated in any way the interpreter chooses.) 6: Functions to manipulate marks. int inter_setmark(SCR *, CHAR_T name); Create the specified mark if it does not exist (the mark will have no contents). int inter_getmark(SCR *, CHAR_T name, MARK **markp); Return a pointer to the specified mark in the location referenced by markp. (Since a pointer to the real item is being returned, it can be manipulated in any way the interpreter chooses.) 7: Function to manipulate screens. SCR *inter_iscreen(); Create a new screen, and return a pointer to it. int inter_escreen(SCR *); End a screen. 8: Functions to get input from the user. int inter_getchar(CHAR_T *chp, enum maptype {NONE, INPUT, COMMAND} mapt); Return a character from the keyboard into the location referenced by chp. Mapt can be set to INPUT, COMMAND or NONE, depending on what vi mappings should be applied to the character. int inter_getline(SCR *, char *prompt, CHAR_T **linep, size_t *lenp, enum maptype {NONE, INPUT, COMMAND} mapt); Return a pointer to a line entered by the user, and its length, into the locations linep and lenp. A prompt may be specified by prompt, and mappings by mapt. int inter_freeline(CHAR_T *linep); Free the memory that was allocated by inter_getline(); 9: Function to retrieve and set the cursor. int inter_getcursor(SCR *, MARK *mark); Store the current cursor position in mark. int inter_setcursor(SCR *, MARK *mark); Set the current cursor position to mark. 10: Function to return a motion command from the user. int inter_getmotion(SCR *, MARK *start, MARK *end, enum movetype {LINE, CHAR} *mt); Nvi gets a motion command from the user and returns the starting and stopping points of the movement, reordered from the beginning to the end of the file. The standard rules for line/character motions are applied, and returned to the interpreter through the mt argument. 11: Functions to return pathnames. 12: Functions to return edit options. 13: Nvi commands which will send text to the interpreter. Nvi will have a new ex command "inter", which will pipe the rest of the line up to the first unescaped to the interpreter, of the following form: :[address[,address]] inter [count] command The interface from the ex command to the interpreter is a function: int inter_ex( SCR *, /* Current screen. */ char *cmd; /* The command. */ size_t len; /* The command length. */ MARK *start, /* Starting address for INTER_EX */ MARK *end, /* Ending address for INTER_EX */ int count); /* Count. */ Nvi will have a new vi command "*" which will pipe the contents of the named buffer to the interpreter, of the following form: [count]* The interface from the vi command to the interpreter is a function: int inter_vi( SCR *, /* Current screen. */ CHAR_T buffer, /* Buffer. */ int count); /* Count. */ vigor-0.016.orig/docs/interp/spell.ok0100644000076400007640000000043307103707242016173 0ustar cjw44cjw44API BERR Mapt Nvi Perl SCR SYSERR Tcl VINFO aline callback chp cmd cmds dline enum escreen excmd freeline getbuf getcursor getline getmotion gline iline int interp iscreen lenp linep lline lno lnop lp mapt maptype movetype msgq msgtype nvi recno setcursor sline strerror textp vicmd vigor-0.016.orig/docs/USD.doc/0040755000076400007640000000000007103707243014423 5ustar cjw44cjw44vigor-0.016.orig/docs/USD.doc/edit/0040755000076400007640000000000007103707242015347 5ustar cjw44cjw44vigor-0.016.orig/docs/USD.doc/edit/Makefile0100644000076400007640000000024207103707242017002 0ustar cjw44cjw44# @(#)Makefile 8.4 (Berkeley) 8/18/96 ROFF= groff TBL= tbl edittut.ps: edittut.ms ${TBL} edittut.ms | ${ROFF} -ms > $@ chmod 444 $@ clean: rm -f edittut.ps vigor-0.016.orig/docs/USD.doc/edit/edit.vindex0100644000076400007640000000626107103707242017515 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)edit.vindex 8.1 (Berkeley) 6/8/93 .\" .bd I .ND .TL Index .sp 3 .2C .nf addressing, \fIsee\fR line numbers append mode, 4 backslash (\\), 18 buffer, 2 command mode, 4 context search, 8, 10, 13, 18 control characters (``^'' notation), 8 control-d, 6 current filename, 19, 20 current line (.), 9, 15 diagnostic messages, 4 disk, 2 documentation, 21 edit (to begin editing session), 3, 7 editing commands: .in +2 append (a), 4, 7 change (c), 16 copy (co), 13 delete (d), 13-14 edit (e), 12 file (f), 19 global (g), 18-19 move (m), 12-13 number (nu), 9 preserve (pre), 20-21 print (p), 8 quit (q), 5, 11 quit! (q!), 11 read (r), 20 recover (rec), 20 substitute (s), 9-10, 17, 18 undo (u), 14, 17 write (w), 5-6, 11, 19-20 z, 11 .sp 10i ! (shell escape), 19 $= , 15 +, 15 \-, 15 //, 8, 18 ??, 18 \&\fB.\fR, 9, 15 \&\fB.\fR=, 9, 15 .in -2 erasing .ti +2 characters (#), 8 .ti +2 lines (@), 8 ex (text editor), 21 \fIEx Reference Manual\fR, 21 file, 1 file recovery, 20 filename, 2 Interrupt (message), 7 line numbers, \fIsee also\fR current line .ti +2 dollar sign ($), 8, 12-13, 15 .ti +2 dot (.), 9, 15 .ti +2 relative (+ and \-), 15, 16 logging out, 6 login procedure, 2 ``magic'' characters, 21 non-printing characters, 8 ``not found'' (message), 3 program, 1 recovery \fIsee\fR file recovery shell, 18 shell escape (!), 19 special characters (^, $, \e), 18 text input mode, 4 UNIX, 1 vigor-0.016.orig/docs/USD.doc/edit/edittut.ms0100644000076400007640000017636007103707242017404 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)edittut.ms 8.3 (Berkeley) 8/18/96 .\" .ll 6.5i .nr LL 6.5i .EH 'USD:11-%''Edit: A Tutorial' .OH 'Edit: A Tutorial''USD:11-%' .LP .ds u \s-2UNIX\s0 .ND .sp 4 .ce \f3\s+2Edit: A Tutorial\s0\f1 .sp .ce 3 .I Ricki Blau .sp James Joyce .R .sp .ce 3 Computing Services University of California Berkeley, California 94720 .sp 3 .ce .I ABSTRACT .R .sp .LP This narrative introduction to the use of the text editor .I edit assumes no prior familiarity with computers or with text editing. Its aim is to lead the beginning \s-2UNIX\(dg\s+2 user through the .FS \(dgUNIX is a trademark of Bell Laboratories. .FE fundamental steps of writing and revising a file of text. Edit, a version of the text editor .I ex, was designed to provide an informative environment for new and casual users. .PP We welcome comments and suggestions about this tutorial and the \s-2UNIX\s+2 documentation in general. .sp .5v September 1981 .bp .ll 6.5i .nr LL 6.5i .nr LT 6.5i .ds u \s-2UNIX\s0 .ce \s+2\f3Contents\f1\s0 .LP .nf Introduction\ \ \ 3 .sp Session 1\ \ 4 .in +.5i Making contact with \s-2UNIX\s+2\ \ \ 4 Logging in\ \ 4 Asking for \fIedit\fR\ \ \ 4 The ``Command not found'' message\ \ \ 5 A summary\ \ 5 Entering text\ \ \ 5 Messages from \fIedit\fR\ \ \ 5 Text input mode\ \ \ 6 Making corrections\ \ \ 6 Writing text to disk\ \ \ 7 Signing off\ \ 7 .in -.5i .sp Session 2\ \ \ 8 .in +.5i Adding more text to the file\ \ \ 8 Interrupt\ \ \ 8 Making corrections\ \ \ 8 Listing what's in the buffer (p)\ \ \ 9 Finding things in the buffer\ \ \ 9 The current line\ \ \ 10 Numbering lines (nu)\ \ \ 10 Substitute command (s)\ \ \ 10 Another way to list what's in the buffer (z)\ \ \ 11 Saving the modified text\ \ \ 12 .in -.5i .sp Session 3\ \ \ 13 .in +.5i Bringing text into the buffer (e)\ \ \ 13 Moving text in the buffer (m)\ \ \ 13 Copying lines (copy)\ \ \ 14 Deleting lines (d)\ \ \ 14 A word or two of caution\ \ \ 15 Undo (u) to the rescue\ \ \ 15 More about the dot (.) and buffer end ($)\ \ \ 16 Moving around in the buffer (+ and \-)\ \ \ 16 Changing lines (c)\ \ \ 17 .in -.5i .sp Session 4\ \ \ 18 .in +.5i Making commands global (g)\ \ \ 18 More about searching and substituting\ \ \ 19 Special characters\ \ \ 19 Issuing \s-2UNIX\s+2 commands from the editor\ \ \ 20 Filenames and file manipulation\ \ \ 20 The file (f) command\ \ \ 20 Reading additional files (r)\ \ \ 21 Writing parts of the buffer\ \ \ 21 Recovering files\ \ \ 21 Other recovery techniques\ \ \ 21 Further reading and other information\ \ \ 22 Using \fIex\fR\ \ \ 22 .in -.5i .sp Index\ \ \ 23 .bp .SH .ce \s+2Introduction\s0 .PP Text editing using a terminal connected to a computer allows you to create, modify, and print text easily. A .I text editor .R is a program that assists you as you create and modify text. The text editor you will learn here is named .I edit. Creating text using edit is as easy as typing it on an electric typewriter. Modifying text involves telling the text editor what you want to add, change, or delete. You can review your text by typing a command to print the file contents as they are currently. Another program (which we do not discuss in this document), a text formatter, rearranges your text for you into ``finished form.'' .PP These lessons assume no prior familiarity with computers or with text editing. They consist of a series of text editing sessions which lead you through the fundamental steps of creating and revising text. After scanning each lesson and before beginning the next, you should try the examples at a terminal to get a feeling for the actual process of text editing. If you set aside some time for experimentation, you will soon become familiar with using the computer to write and modify text. In addition to the actual use of the text editor, other features of \s-2UNIX\s0 will be very important to your work. You can begin to learn about these other features by reading one of the other tutorials that provide a general introduction to the system. You will be ready to proceed with this lesson as soon as you are familiar with (1) your terminal and its special keys, (2) how to login, (3) and the ways of correcting typing errors. Let's first define some terms: .sp .5 .IP program 12 A set of instructions, given to the computer, describing the sequence of steps the computer performs in order to accomplish a specific task. The task must be specific, such as balancing your checkbook or editing your text. A general task, such as working for world peace, is something we can all do, but not something we can currently write programs to do. .IP UNIX \s-2UNIX\s0 is a special type of program, called an operating system, that supervises the machinery and all other programs comprising the total computer system. .IP edit .I edit is the name of the \s-2UNIX\s0 text editor you will be learning to use, and is a program that aids you in writing or revising text. Edit was designed for beginning users, and is a simplified version of an editor named .I ex. .IP file Each \s-2UNIX\s0 account is allotted space for the permanent storage of information, such as programs, data or text. A file is a logical unit of data, for example, an essay, a program, or a chapter from a book, which is stored on a computer system. Once you create a file, it is kept until you instruct the system to remove it. You may create a file during one \s-2UNIX\s0 session, end the session, and return to use it at a later time. Files contain anything you choose to write and store in them. The sizes of files vary to suit your needs; one file might hold only a single number, yet another might contain a very long document or program. The only way to save information from one session to the next is to store it in a file, which you will learn in Session 1. .IP filename Filenames are used to distinguish one file from another, serving the same purpose as the labels of manila folders in a file cabinet. In order to write or access information in a file, you use the name of that file in a \s-2UNIX\s0 command, and the system will automatically locate the file. .IP disk Files are stored on an input/output device called a disk, which looks something like a stack of phonograph records. Each surface is coated with a material similar to that on magnetic recording tape, and information is recorded on it. .IP buffer A temporary work space, made available to the user for the duration of a session of text editing and used for creating and modifying the text file. We can think of the buffer as a blackboard that is erased after each class, where each session with the editor is a class. .bp .SH .ce 1 \s+2Session 1\s0 .sp 1 .SH Making contact with \s-1UNIX\s0 .PP To use the editor you must first make contact with the computer by logging in to \s-2UNIX\s0. We'll quickly review the standard \s-2UNIX\s0 login procedure for the two ways you can make contact: on a terminal that is directly linked to the computer, or over a telephone line where the computer answers your call. .SH Directly-linked terminals .PP Turn on your terminal and press the \s-1RETURN\s0 key. You are now ready to login. .SH Dial-up terminals .PP If your terminal connects with the computer over a telephone line, turn on the terminal, dial the system access number, and, when you hear a high-pitched tone, place the telephone handset in the acoustic coupler, if you are using one. You are now ready to login. .SH Logging in .PP The message inviting you to login is: .DS I 1i login: .DE .LP Type your login name, which identifies you to \s-2UNIX\s0, on the same line as the login message, and press \s-2RETURN\s+2. If the terminal you are using has both upper and lower case, .B be sure you enter your login name in lower case; .R otherwise \s-2UNIX\s0 assumes your terminal has only upper case and will not recognize lower case letters you may type. \s-2UNIX\s0 types ``login:'' and you reply with your login name, for example ``susan'': .DS I 1i login: \fBsusan\fR \fI(and press the \s-2RETURN\s0 key)\fR .DE (In the examples, input you would type appears in .B "bold face" to distinguish it from the responses from \s-2UNIX\s0.) .PP \s-2UNIX\s0 will next respond with a request for a password as an additional precaution to prevent unauthorized people from using your account. The password will not appear when you type it, to prevent others from seeing it. The message is: .DS I 1i Password: \fI(type your password and press \s-2RETURN\s+2)\fR .DE If any of the information you gave during the login sequence was mistyped or incorrect, \s-2UNIX\s0 will respond with .DS I 1i Login incorrect. .if t .sp .2v .if n .sp 1 login: .DE in which case you should start the login process anew. Assuming that you have successfully logged in, \s-2UNIX\s0 will print the message of the day and eventually will present you with a % at the beginning of a fresh line. The % is the \s-2UNIX\s0 prompt symbol which tells you that \s-2UNIX\s0 is ready to accept a command. .bd I 3 .SH Asking for \fIedit\fP .fl .bd I .PP You are ready to tell \s-2UNIX\s0 that you want to work with edit, the text editor. Now is a convenient time to choose a name for the file of text you are about to create. To begin your editing session, type .B edit followed by a space and then the filename you have selected; for example, ``text''. After that, press the \s-2RETURN\s0 key and wait for edit's response: .DS I 1i % \fBedit text\fP \fI(followed by a \s-2RETURN\s+2)\fR "text" No such file or directory : .DE If you typed the command correctly, you will now be in communication with edit. Edit has set aside a buffer for use as a temporary working space during your current editing session. Since ``text'' is a new file we are about to create the editor was unable to find that file, which it confirms by saying: .DS I 1i "text" No such file or directory .DE On the next line appears edit's prompt ``:'', announcing that you are in \f2command mode\f1 and edit expects a command from you. You may now begin to create the new file. .SH The ``Command not found'' message .PP If you misspelled edit by typing, say, ``editor'', this might appear: .DS I 1i % \fBeditor\fP editor: Command not found % .DE Your mistake in calling edit ``editor'' was treated by \s-2UNIX\s0 as a request for a program named ``editor''. Since there is no program named ``editor'', \s-2UNIX\s0 reported that the program was ``not found''. A new % indicates that \s-2UNIX\s0 is ready for another command, and you may then enter the correct command. .SH A summary .PP Your exchange with \s-2UNIX\s0 as you logged in and made contact with edit should look something like this: .DS I 1i login: \fBsusan\fP Password: \&... A Message of General Interest ... % \fBedit text\fP "text" No such file or directory : .DE .SH Entering text .PP You may now begin entering text into the buffer. This is done by \fIappending\fP (or adding) text to whatever is currently in the buffer. Since there is nothing in the buffer at the moment, you are appending text to nothing; in effect, since you are adding text to nothing you are creating text. Most edit commands have two equivalent forms: a word that suggests what the command does, and a shorter abbreviation of that word. Many beginners find the full command names easier to remember at first, but once you are familiar with editing you may prefer to type the shorter abbreviations. The command to input text is ``append''. (It may be abbreviated ``a''.) Type .B append and press the \s-2RETURN\s0 key. .DS I 1i % \fBedit text \fR:\|\fBappend .R .DE .SH .bd I 3 Messages from .I edit .fl .bd I .PP If you make a mistake in entering a command and type something that edit does not recognize, edit will respond with a message intended to help you diagnose your error. For example, if you misspell the command to input text by typing, perhaps, ``add'' instead of ``append'' or ``a'', you will receive this message: .DS I 1i :\|\fBadd\fR add: Not an editor command : .DE When you receive a diagnostic message, check what you typed in order to determine what part of your command confused edit. The message above means that edit was unable to recognize your mistyped command and, therefore, did not execute it. Instead, a new ``:'' appeared to let you know that edit is again ready to execute a command. .SH Text input mode .PP By giving the command ``append'' (or using the abbreviation ``a''), you entered .I text input mode, .R also known as .I append mode. .R When you enter text input mode, edit stops sending you a prompt. You will not receive any prompts or error messages while in text input mode. You can enter pretty much anything you want on the lines. The lines are transmitted one by one to the buffer and held there during the editing session. You may append as much text as you want, and .I when you wish to stop entering text lines you should type a period as the only character on the line and press the \s-2RETURN\s0 key. .R When you type the period and press \s-2RETURN\s0, you signal that you want to stop appending text, and edit responds by allowing you to exit text input mode and reenter command mode. Edit will again prompt you for a command by printing ``:''. .PP Leaving append mode does not destroy the text in the buffer. You have to leave append mode to do any of the other kinds of editing, such as changing, adding, or printing text. If you type a period as the first character and type any other character on the same line, edit will believe you want to remain in append mode and will not let you out. As this can be very frustrating, be sure to type .B only the period and the \s-2RETURN\s0 key. .PP This is a good place to learn an important lesson about computers and text: a blank space is a character as far as a computer is concerned. If you so much as type a period followed by a blank (that is, type a period and then the space bar on the keyboard), you will remain in append mode with the last line of text being: .DS I 1i .B .ps +2 \&. .ps -2 .R .DE Let's say that you enter the lines (try to type .B exactly what you see, including ``thiss''): .DS I 1i .B This is some sample text. And thiss is some more text. Text editing is strange, but nice. \&. .R .DE The last line is the period followed by a \s-2RETURN\s0 that gets you out of append mode. .SH Making corrections .PP If you have read a general introduction to \s-2UNIX\s0, you will recall that it is possible to erase individual letters that you have typed. This is done by typing the designated erase character as many times as there are characters you want to erase. .PP The usual erase character varies from place to place and user to user. Often it is the backspace (control-H), so you can correct typing errors in the line you are typing by holding down the \s-1CTRL\s+1 key and typing the ``H'' key. (Sometimes it is the DEL key.) If you type the erase character you will notice that the terminal backspaces in the line you are on. You can backspace over your error, and then type what you want to be the rest of the line. .PP If you make a bad start in a line and would like to begin again, you can either backspace to the beginning of the line or you can use the at-sign ``@'' to erase everything on the line: .DS I 1i .B Text edtiing is strange, but@ Text editing is strange, but nice. .R .fl .bd S .DE When you type the at-sign (@), you erase the entire line typed so far and are given a fresh line to type on. You may immediately begin to retype the line. This, unfortunately, does not work after you type the line and press \s-2RETURN\s+2. To make corrections in lines that have been completed, it is necessary to use the editing commands covered in the next sessions. .SH Writing text to disk .PP You are now ready to edit the text. One common operation is to write the text to disk as a file for safekeeping after the session is over. This is the only way to save information from one session to the next, since the editor's buffer is temporary and will last only until the end of the editing session. Learning how to write a file to disk is second in importance only to entering the text. To write the contents of the buffer to a disk file, use the command ``write'' (or its abbreviation ``w''): .DS I 1i :\|\fBwrite .R .DE Edit will copy the contents of the buffer to a disk file. If the file does not yet exist, a new file will be created automatically and the presence of a ``[New file]'' will be noted. The newly-created file will be given the name specified when you entered the editor, in this case ``text''. To confirm that the disk file has been successfully written, edit will repeat the filename and give the number of lines and the total number of characters in the file. The buffer remains unchanged by the ``write'' command. All of the lines that were written to disk will still be in the buffer, should you want to modify or add to them. .PP Edit must have a name for the file to be written. If you forgot to indicate the name of the file when you began to edit, edit will print in response to your write command: .DS I 1i No current filename .DE If this happens, you can specify the filename in a new write command: .DS I 1i :\|\fBwrite text .R .DE After the ``write'' (or ``w''), type a space and then the name of the file. .SH Signing off .PP We have done enough for this first lesson on using the \s-2UNIX\s0 text editor, and are ready to quit the session with edit. To do this we type ``quit'' (or ``q'') and press \s-2RETURN\s+2: .DS I 1i :\|\fBwrite .R "text" [New file] 3 lines, 90 characters :\|\fBquit\fR % .DE The % is from \s-2UNIX\s0 to tell you that your session with edit is over and you may command \s-2UNIX\s0 further. Since we want to end the entire session at the terminal, we also need to exit from \s-2UNIX\s0. In response to the \s-2UNIX\s0 prompt of ``\|%\|'' type the command .DS I 1i %\|\fBlogout\fR .DE This will end your session with \s-2UNIX\s0, and will ready the terminal for the next user. It is always important to type \fBlogout\fR at the end of a session to make absolutely sure no one could accidentally stumble into your abandoned session and thus gain access to your files, tempting even the most honest of souls. .sp 1 .PP This is the end of the first session on \s-2UNIX\s0 text editing. .bp .TL Session 2 .sp .PP Login with \s-2UNIX\s0 as in the first session: .DS I 1i login: \fBsusan\fP \fI(carriage return)\fR Password: \fI(give password and carriage return)\fR .if t .sp .2v .if n .sp 1 \&... A Message of General Interest ... % .DE When you indicate you want to edit, you can specify the name of the file you worked on last time. This will start edit working, and it will fetch the contents of the file into the buffer, so that you can resume editing the same file. When edit has copied the file into the buffer, it will repeat its name and tell you the number of lines and characters it contains. Thus, .DS I 1i .B % edit text .R "text" 3 lines, 90 characters : .DE means you asked edit to fetch the file named ``text'' for editing, causing it to copy the 90 characters of text into the buffer. Edit awaits your further instructions, and indicates this by its prompt character, the colon (:). In this session, we will append more text to our file, print the contents of the buffer, and learn to change the text of a line. .SH Adding more text to the file .PP If you want to add more to the end of your text you may do so by using the append command to enter text input mode. When ``append'' is the first command of your editing session, the lines you enter are placed at the end of the buffer. Here we'll use the abbreviation for the append command, ``a'': .DS I 1i :\|\fBa This is text added in Session 2. It doesn't mean much here, but it does illustrate the editor. \|\fB\s+2\&.\s-2 .R .DE You may recall that once you enter append mode using the ``a'' (or ``append'') command, you need to type a line containing only a period (.) to exit append mode. .SH Interrupt .PP Should you press the \s-2RUB\s+2 key (sometimes labelled \s-2DELETE\s+2) while working with edit, it will send this message to you: .DS I 1i Interrupt : .DE Any command that edit might be executing is terminated by rub or delete, causing edit to prompt you for a new command. If you are appending text at the time, you will exit from append mode and be expected to give another command. The line of text you were typing when the append command was interrupted will not be entered into the buffer. .SH Making corrections .PP If while typing the line you hit an incorrect key, recall that you may delete the incorrect character or cancel the entire line of input by erasing in the usual way. Refer either to the last few pages of Session 1 if you need to review the procedures for making a correction. The most important idea to remember is that erasing a character or cancelling a line must be done before you press the \s-2RETURN\s+2 key. .SH Listing what's in the buffer (p) .PP Having appended text to what you wrote in Session 1, you might want to see all the lines in the buffer. To print the contents of the buffer, type the command: .DS I 1i :\|\fB1,$p .R .DE The ``1''\(dg .FS \(dgThe numeral ``one'' is the top left-most key, and should not be confused with the letter ``el''. .FE stands for line 1 of the buffer, the ``$'' is a special symbol designating the last line of the buffer, and ``p'' (or \fBprint\fR) is the command to print from line 1 to the end of the buffer. The command ``1,$p'' gives you: .DS I 1i This is some sample text. And thiss is some more text. Text editing is strange, but nice. This is text added in Session 2. It doesn't mean much here, but it does illustrate the editor. .DE Occasionally, you may accidentally type a character that can't be printed, which can be done by striking a key while the \s-2CTRL\s0 key is pressed. In printing lines, edit uses a special notation to show the existence of non-printing characters. Suppose you had introduced the non-printing character ``control-A'' into the word ``illustrate'' by accidently pressing the \s-2CTRL\s0 key while typing ``a''. This can happen on many terminals because the \s-2CTRL\s+2 key and the ``A'' key are beside each other. If your finger presses between the two keys, control-A results. When asked to print the contents of the buffer, edit would display .DS I 1i it does illustr^Ate the editor. .DE To represent the control-A, edit shows ``^A''. The sequence ``^'' followed by a capital letter stands for the one character entered by holding down the \s-2CTRL\s0 key and typing the letter which appears after the ``^''. We'll soon discuss the commands that can be used to correct this typing error. .PP In looking over the text we see that ``this'' is typed as ``thiss'' in the second line, a deliberate error so we can learn to make corrections. Let's correct the spelling. .SH Finding things in the buffer .PP In order to change something in the buffer we first need to find it. We can find ``thiss'' in the text we have entered by looking at a listing of the lines. Physically speaking, we search the lines of text looking for ``thiss'' and stop searching when we have found it. The way to tell edit to search for something is to type it inside slash marks: .DS I 1i :\|\fB/thiss/ .R .DE By typing .B /thiss/ and pressing \s-1RETURN\s0, you instruct edit to search for ``thiss''. If you ask edit to look for a pattern of characters which it cannot find in the buffer, it will respond ``Pattern not found''. When edit finds the characters ``thiss'', it will print the line of text for your inspection: .DS I 1i And thiss is some more text. .DE Edit is now positioned in the buffer at the line it just printed, ready to make a change in the line. .bp .SH The current line .PP Edit keeps track of the line in the buffer where it is located at all times during an editing session. In general, the line that has been most recently printed, entered, or changed is the current location in the buffer. The editor is prepared to make changes at the current location in the buffer, unless you direct it to another location. .PP In particular, when you bring a file into the buffer, you will be located at the last line in the file, where the editor left off copying the lines from the file to the buffer. If your first editing command is ``append'', the lines you enter are added to the end of the file, after the current line \(em the last line in the file. .PP You can refer to your current location in the buffer by the symbol period (.) usually known by the name ``dot''. If you type ``.'' and carriage return you will be instructing edit to print the current line: .DS I 1i :\|\fB\s+2\&.\s-2 .R And thiss is some more text. .DE .PP If you want to know the number of the current line, you can type .B \&.= and press \s-2RETURN\s+2, and edit will respond with the line number: .DS I 1i :\|\fB\s+2.\s-2= .R 2 .DE If you type the number of any line and press \s-2RETURN\s+2, edit will position you at that line and print its contents: .DS I 1i :\|\fB2 .R And thiss is some more text. .DE You should experiment with these commands to gain experience in using them to make changes. .SH Numbering lines (nu) .PP The .B number (nu) .R command is similar to print, giving both the number and the text of each printed line. To see the number and the text of the current line type .DS I 1i :\|\fBnu .R \0\0\0\0\02\0\0And thiss is some more text. .DE Note that the shortest abbreviation for the number command is ``nu'' (and not ``n'', which is used for a different command). You may specify a range of lines to be listed by the number command in the same way that lines are specified for print. For example, \f31,$nu\f1 lists all lines in the buffer with their corresponding line numbers. .SH Substitute command (s) .PP Now that you have found the misspelled word, you can change it from ``thiss'' to ``this''. As far as edit is concerned, changing things is a matter of substituting one thing for another. As .I a stood for .I append, so .I s stands for .I substitute. We will use the abbreviation ``s'' to reduce the chance of mistyping the substitute command. This command will instruct edit to make the change: .DS I 1i \f32s/thiss/this/\f1 .DE We first indicate the line to be changed, line 2, and then type an ``s'' to indicate we want edit to make a substitution. Inside the first set of slashes are the characters that we want to change, followed by the characters to replace them, and then a closing slash mark. To summarize: .DS I 1i 2s/ \fIwhat is to be changed\fR / \fIwhat to change it to \fR/ .DE If edit finds an exact match of the characters to be changed it will make the change .B only in the first occurrence of the characters. If it does not find the characters to be changed, it will respond: .DS I 1i Substitute pattern match failed .DE indicating that your instructions could not be carried out. When edit does find the characters that you want to change, it will make the substitution and automatically print the changed line, so that you can check that the correct substitution was made. In the example, .DS I 1i :\|\fB2s/thiss/this/ .R And this is some more text. .DE line 2 (and line 2 only) will be searched for the characters ``thiss'', and when the first exact match is found, ``thiss'' will be changed to ``this''. Strictly speaking, it was not necessary above to specify the number of the line to be changed. In .DS I 1i :\|\fBs/thiss/this/ .R .DE edit will assume that we mean to change the line where we are currently located (``.''). In this case, the command without a line number would have produced the same result because we were already located at the line we wished to change. .PP For another illustration of the substitute command, let us choose the line: .DS I 1i Text editing is strange, but nice. .DE You can make this line a bit more positive by taking out the characters ``strange, but\ '' so the line reads: .DS I 1i Text editing is nice. .DE A command that will first position edit at the desired line and then make the substitution is: .DS I 1i :\|\fB/strange/s/strange, but // .R .DE .LP What we have done here is combine our search with our substitution. Such combinations are perfectly legal, and speed up editing quite a bit once you get used to them. That is, you do not necessarily have to use line numbers to identify a line to edit. Instead, you may identify the line you want to change by asking edit to search for a specified pattern of letters that occurs in that line. The parts of the above command are: .in +1i .TS l l. \fB/strange/\fP tells edit to find the characters ``strange'' in the text \fBs\fP tells edit to make a substitution \fB/strange, but //\fP substitutes nothing at all for the characters ``strange, but '' .TE .in -1i .PP You should note the space after ``but'' in ``/strange, but /''. If you do not indicate that the space is to be taken out, your line will read: .DS I 1i .if t Text editing is nice. .if n Text editing is nice. .DE which looks a little funny because of the extra space between ``is'' and ``nice''. Again, we realize from this that a blank space is a real character to a computer, and in editing text we need to be aware of spaces within a line just as we would be aware of an ``a'' or a ``4''. .SH Another way to list what's in the buffer (z) .PP Although the print command is useful for looking at specific lines in the buffer, other commands may be more convenient for viewing large sections of text. You can ask to see a screen full of text at a time by using the command .B z. If you type .DS I 1i :\|\fB1z .R .DE edit will start with line 1 and continue printing lines, stopping either when the screen of your terminal is full or when the last line in the buffer has been printed. If you want to read the next segment of text, type the command .DS I 1i :\|\fBz .DE If no starting line number is given for the z command, printing will start at the ``current'' line, in this case the last line printed. Viewing lines in the buffer one screen full at a time is known as \fIpaging\fR. Paging can also be used to print a section of text on a hard-copy terminal. .SH Saving the modified text .PP This seems to be a good place to pause in our work, and so we should end the second session. If you (in haste) type ``q'' to quit the session your dialogue with edit will be: .DS I 1i :\|\fBq .R No write since last change (:quit! overrides) : .DE This is edit's warning that you have not written the modified contents of the buffer to disk. You run the risk of losing the work you did during the editing session since you typed the latest write command. Because in this lesson we have not written to disk at all, everything we have done would have been lost if edit had obeyed the \fBq\fR command. If you did not want to save the work done during this editing session, you would have to type ``q!'' or (``quit!'') to confirm that you indeed wanted to end the session immediately, leaving the file as it was after the most recent ``write'' command. However, since you want to save what you have edited, you need to type: .DS I 1i :\|\fBw .R "text" 6 lines, 171 characters .DE and then follow with the commands to quit and logout: .DS I 1i :\|\fBq % \fBlogout\fR .DE and hang up the phone or turn off the terminal when \s-2UNIX\s0 asks for a name. Terminals connected to the port selector will stop after the logout command, and pressing keys on the keyboard will do nothing. .sp 1 .PP This is the end of the second session on \s-2UNIX\s0 text editing. .bp .TL Session 3 .SH Bringing text into the buffer (e) .PP Login to \s-2UNIX\s0 and make contact with edit. You should try to login without looking at the notes, but if you must then by all means do. .PP Did you remember to give the name of the file you wanted to edit? That is, did you type .DS I 1i % \fBedit text\fR .DE or simply .DS I 1i % \fBedit\fR .DE Both ways get you in contact with edit, but the first way will bring a copy of the file named ``text'' into the buffer. If you did forget to tell edit the name of your file, you can get it into the buffer by typing: .DS I 1i :\|\fBe text .R "text" 6 lines, 171 characters .DE The command .B edit, which may be abbreviated \fBe\fR, tells edit that you want to erase anything that might already be in the buffer and bring a copy of the file ``text'' into the buffer for editing. You may also use the edit (e) command to change files in the middle of an editing session, or to give edit the name of a new file that you want to create. Because the edit command clears the buffer, you will receive a warning if you try to edit a new file without having saved a copy of the old file. This gives you a chance to write the contents of the buffer to disk before editing the next file. .SH Moving text in the buffer (m) .PP Edit allows you to move lines of text from one location in the buffer to another by means of the .B move (\fBm\fR) command. The first two examples are for illustration only, though after you have read this Session you are welcome to return to them for practice. The command .DS I 1i :\|\fB2,4m$ .R .DE directs edit to move lines 2, 3, and 4 to the end of the buffer ($). The format for the move command is that you specify the first line to be moved, the last line to be moved, the move command ``m'', and the line after which the moved text is to be placed. So, .DS I 1i :\|\fB1,3m6 .R .DE would instruct edit to move lines 1 through 3 (inclusive) to a location after line 6 in the buffer. To move only one line, say, line 4, to a location in the buffer after line 5, the command would be ``4m5''. .PP Let's move some text using the command: .DS I 1i :\|\fB5,$m1 .R 2 lines moved it does illustrate the editor. .DE After executing a command that moves more than one line of the buffer, edit tells how many lines were affected by the move and prints the last moved line for your inspection. If you want to see more than just the last line, you can then use the print (p), z, or number (nu) command to view more text. The buffer should now contain: .DS I 1i This is some sample text. It doesn't mean much here, but it does illustrate the editor. And this is some more text. Text editing is nice. This is text added in Session 2. .DE You can restore the original order by typing: .DS I 1i :\|\fB4,$m1 .R .DE or, combining context searching and the move command: .DS I 1i :\|\fB/And this is some/,/This is text/m/This is some sample/ .R .DE (Do not type both examples here!) The problem with combining context searching with the move command is that your chance of making a typing error in such a long command is greater than if you type line numbers. .SH Copying lines (copy) .PP The .B copy command is used to make a second copy of specified lines, leaving the original lines where they were. Copy has the same format as the move command, for example: .DS I 1i :\|\fB2,5copy $ .R .DE makes a copy of lines 2 through 5, placing the added lines after the buffer's end ($). Experiment with the copy command so that you can become familiar with how it works. Note that the shortest abbreviation for copy is \f3co\f1 (and not the letter ``c'', which has another meaning). .SH Deleting lines (d) .PP Suppose you want to delete the line .DS I 1i This is text added in Session 2. .DE from the buffer. If you know the number of the line to be deleted, you can type that number followed by \fBdelete\fR or \fBd\fR. This example deletes line 4, which is ``This is text added in Session 2.'' if you typed the commands suggested so far. .DS I 1i :\|\fB4d .R It doesn't mean much here, but .DE Here ``4'' is the number of the line to be deleted, and ``delete'' or ``d'' is the command to delete the line. After executing the delete command, edit prints the line that has become the current line (``.''). .PP If you do not happen to know the line number you can search for the line and then delete it using this sequence of commands: .DS I 1i :\|\fB/added in Session 2./ .R This is text added in Session 2. :\|\fBd .R It doesn't mean much here, but .DE The ``/added in Session 2./'' asks edit to locate and print the line containing the indicated text, starting its search at the current line and moving line by line until it finds the text. Once you are sure that you have correctly specified the line you want to delete, you can enter the delete (d) command. In this case it is not necessary to specify a line number before the ``d''. If no line number is given, edit deletes the current line (``.''), that is, the line found by our search. After the deletion, your buffer should contain: .DS I 1i This is some sample text. And this is some more text. Text editing is nice. It doesn't mean much here, but it does illustrate the editor. And this is some more text. Text editing is nice. This is text added in Session 2. It doesn't mean much here, but .DE To delete both lines 2 and 3: .DS I 1i And this is some more text. Text editing is nice. .DE you type .DS I 1i :\|\f32,3d\f1 2 lines deleted .DE which specifies the range of lines from 2 to 3, and the operation on those lines \(em ``d'' for delete. If you delete more than one line you will receive a message telling you the number of lines deleted, as indicated in the example above. .PP The previous example assumes that you know the line numbers for the lines to be deleted. If you do not you might combine the search command with the delete command: .DS I 1i :\|\fB/And this is some/,/Text editing is nice./d .R .DE .SH A word or two of caution .PP In using the search function to locate lines to be deleted you should be .B absolutely sure .R the characters you give as the basis for the search will take edit to the line you want deleted. Edit will search for the first occurrence of the characters starting from where you last edited \- that is, from the line you see printed if you type dot (.). .PP A search based on too few characters may result in the wrong lines being deleted, which edit will do as easily as if you had meant it. For this reason, it is usually safer to specify the search and then delete in two separate steps, at least until you become familiar enough with using the editor that you understand how best to specify searches. For a beginner it is not a bad idea to double-check each command before pressing \s-2RETURN\s+2 to send the command on its way. .SH Undo (u) to the rescue .PP The .B undo (u) .R command has the ability to reverse the effects of the last command that changed the buffer. To undo the previous command, type ``u'' or ``undo''. Undo can rescue the contents of the buffer from many an unfortunate mistake. However, its powers are not unlimited, so it is still wise to be reasonably careful about the commands you give. .PP It is possible to undo only commands which have the power to change the buffer \(em for example, delete, append, move, copy, substitute, and even undo itself. The commands write (w) and edit (e), which interact with disk files, cannot be undone, nor can commands that do not change the buffer, such as print. Most importantly, the .B only command that can be reversed by undo is the last ``undo-able'' command you typed. You can use control-H and @ to change commands while you are typing them, and undo to reverse the effect of the commands after you have typed them and pressed \s-2RETURN\s+2. .PP To illustrate, let's issue an undo command. Recall that the last buffer-changing command we gave deleted the lines formerly numbered 2 and 3. Typing undo at this moment will reverse the effects of the deletion, causing those two lines to be replaced in the buffer. .DS I 1i :\|\fBu .R 2 more lines in file after undo And this is some more text. .DE Here again, edit informs you if the command affects more than one line, and prints the text of the line which is now ``dot'' (the current line). .SH More about the dot (.) and buffer end ($) .PP The function assumed by the symbol dot depends on its context. It can be used: .IP 1. to exit from append mode; we type dot (and only a dot) on a line and press \s-2RETURN\s+2; .IP 2. to refer to the line we are at in the buffer. .LP Dot can also be combined with the equal sign to get the number of the line currently being edited: .DS I 1i :\|\fB\&.= .R .DE If we type ``\fB.\fR='' we are asking for the number of the line, and if we type ``\fB.\fR'' we are asking for the text of the line. .PP In this editing session and the last, we used the dollar sign to indicate the end of the buffer in commands such as print, copy, and move. The dollar sign as a command asks edit to print the last line in the buffer. If the dollar sign is combined with the equal sign (\f3$=\f1) edit will print the line number corresponding to the last line in the buffer. .PP ``\fB.\fR'' and ``$'', then, represent line numbers. Whenever appropriate, these symbols can be used in place of line numbers in commands. For example .DS I 1i :\|\fB\s+2.\s-2,$d .R .DE instructs edit to delete all lines from the current line (\fB.\fR) to the end of the buffer. .SH Moving around in the buffer (+ and \-) .PP When you are editing you often want to go back and re-read a previous line. You could specify a context search for a line you want to read if you remember some of its text, but if you simply want to see what was written a few, say 3, lines ago, you can type .DS I 1i \-3p .DE This tells edit to move back to a position 3 lines before the current line (.) and print that line. You can move forward in the buffer similarly: .DS I 1i +2p .DE instructs edit to print the line that is 2 ahead of your current position. .PP You may use ``+'' and ``\-'' in any command where edit accepts line numbers. Line numbers specified with ``+'' or ``\-'' can be combined to print a range of lines. The command .DS I 1i :\|\fB\-1,+2copy$ .R .DE makes a copy of 4 lines: the current line, the line before it, and the two after it. The copied lines will be placed after the last line in the buffer ($), and the original lines referred to by ``\-1'' and ``+2'' remain where they are. .PP Try typing only ``\-''; you will move back one line just as if you had typed ``\-1p''. Typing the command ``+'' works similarly. You might also try typing a few plus or minus signs in a row (such as ``+++'') to see edit's response. Typing \s-2RETURN\s+2 alone on a line is the equivalent of typing ``+1p''; it will move you one line ahead in the buffer and print that line. .PP If you are at the last line of the buffer and try to move further ahead, perhaps by typing a ``+'' or a carriage return alone on the line, edit will remind you that you are at the end of the buffer: .sp .nf .ti 1i At end-of-file .br or .ti 1i Not that many lines in buffer .fi .LP Similarly, if you try to move to a position before the first line, edit will print one of these messages: .sp .nf .ti 1i Nonzero address required on this command .br or .ti 1i Negative address \- first buffer line is 1 .fi .LP The number associated with a buffer line is the line's ``address'', in that it can be used to locate the line. .SH Changing lines (c) .PP You can also delete certain lines and insert new text in their place. This can be accomplished easily with the .B "change (c)" command. The change command instructs edit to delete specified lines and then switch to text input mode to accept the text that will replace them. Let's say you want to change the first two lines in the buffer: .DS I 1i This is some sample text. And this is some more text. .DE to read .DS I 1i This text was created with the \s-2UNIX\s0 text editor. .DE To do so, you type: .DS I 1i :\|\fB1,2c .R 2 lines changed .B This text was created with the \s-2UNIX\s0 text editor. \s+2\&.\s-2 .R : .DE In the command .B 1,2c we specify that we want to change the range of lines beginning with 1 and ending with 2 by giving line numbers as with the print command. These lines will be deleted. After you type \s-2RETURN\s+2 to end the change command, edit notifies you if more than one line will be changed and places you in text input mode. Any text typed on the following lines will be inserted into the position where lines were deleted by the change command. .B You will remain in text input mode until you exit in the usual way, by typing a period alone on a line. .R Note that the number of lines added to the buffer need not be the same as the number of lines deleted. .sp 1 .PP This is the end of the third session on text editing with \s-2UNIX\s0. .bp .SH .ce 1 \s+2Session 4\s0 .sp .PP This lesson covers several topics, starting with commands that apply throughout the buffer, characters with special meanings, and how to issue \s-2UNIX\s0 commands while in the editor. The next topics deal with files: more on reading and writing, and methods of recovering files lost in a crash. The final section suggests sources of further information. .SH Making commands global (g) .PP One disadvantage to the commands we have used for searching or substituting is that if you have a number of instances of a word to change it appears that you have to type the command repeatedly, once for each time the change needs to be made. Edit, however, provides a way to make commands apply to the entire contents of the buffer \- the .B global (g) .R command. .PP To print all lines containing a certain sequence of characters (say, ``text'') the command is: .DS I 1i :\|\fBg/text/p .R .DE The ``g'' instructs edit to make a global search for all lines in the buffer containing the characters ``text''. The ``p'' prints the lines found. .PP To issue a global command, start by typing a ``g'' and then a search pattern identifying the lines to be affected. Then, on the same line, type the command to be executed for the identified lines. Global substitutions are frequently useful. For example, to change all instances of the word ``text'' to the word ``material'' the command would be a combination of the global search and the substitute command: .DS I 1i :\|\fBg/text/s/text/material/g .R .DE Note the ``g'' at the end of the global command, which instructs edit to change each and every instance of ``text'' to ``material''. If you do not type the ``g'' at the end of the command only the .I first instance of ``text'' \fIin each line\fR will be changed (the normal result of the substitute command). The ``g'' at the end of the command is independent of the ``g'' at the beginning. You may give a command such as: .DS I 1i :\|\fB5s/text/material/g .R .DE to change every instance of ``text'' in line 5 alone. Further, neither command will change ``text'' to ``material'' if ``Text'' begins with a capital rather than a lower-case .I t. .PP Edit does not automatically print the lines modified by a global command. If you want the lines to be printed, type a ``p'' at the end of the global command: .DS I 1i :\|\fBg/text/s/text/material/gp .R .DE You should be careful about using the global command in combination with any other \- in essence, be sure of what you are telling edit to do to the entire buffer. For example, .DS I 1i :\|\fBg/ /d .R 72 less lines in file after global .DE will delete every line containing a blank anywhere in it. This could adversely affect your document, since most lines have spaces between words and thus would be deleted. After executing the global command, edit will print a warning if the command added or deleted more than one line. Fortunately, the undo command can reverse the effects of a global command. You should experiment with the global command on a small file of text to see what it can do for you. .SH More about searching and substituting .PP In using slashes to identify a character string that we want to search for or change, we have always specified the exact characters. There is a less tedious way to repeat the same string of characters. To change ``text'' to ``texts'' we may type either .DS I 1i :\|\fB/text/s/text/texts/ .R .DE as we have done in the past, or a somewhat abbreviated command: .DS I 1i :\|\fB/text/s//texts/ .R .DE In this example, the characters to be changed are not specified \- there are no characters, not even a space, between the two slash marks that indicate what is to be changed. This lack of characters between the slashes is taken by the editor to mean ``use the characters we last searched for as the characters to be changed.'' .PP Similarly, the last context search may be repeated by typing a pair of slashes with nothing between them: .DS I 1i :\|\fB/does/ .R It doesn't mean much here, but :\|\fB// .R it does illustrate the editor. .DE (You should note that the search command found the characters ``does'' in the word ``doesn't'' in the first search request.) Because no characters are specified for the second search, the editor scans the buffer for the next occurrence of the characters ``does''. .PP Edit normally searches forward through the buffer, wrapping around from the end of the buffer to the beginning, until the specified character string is found. If you want to search in the reverse direction, use question marks (?) instead of slashes to surround the characters you are searching for. .PP It is also possible to repeat the last substitution without having to retype the entire command. An ampersand (&) used as a command repeats the most recent substitute command, using the same search and replacement patterns. After altering the current line by typing .DS I 1i :\|\fBs/text/texts/ .R .DE you type .DS I 1i :\|\fB/text/& .R .DE or simply .DS I 1i :\|\fB//& .R .DE to make the same change on the next line in the buffer containing the characters ``text''. .SH Special characters .PP Two characters have special meanings when used in specifying searches: ``$'' and ``^''. ``$'' is taken by the editor to mean ``end of the line'' and is used to identify strings that occur at the end of a line. .DS I 1i :\|\fBg/text.$/s//material./p .R .DE tells the editor to search for all lines ending in ``text.'' (and nothing else, not even a blank space), to change each final ``text.'' to ``material.'', and print the changed lines. .PP The symbol ``^'' indicates the beginning of a line. Thus, .DS I 1i :\|\fBs/^/1. / .R .DE instructs the editor to insert ``1.'' and a space at the beginning of the current line. .PP The characters ``$'' and ``^'' have special meanings only in the context of searching. At other times, they are ordinary characters. If you ever need to search for a character that has a special meaning, you must indicate that the character is to lose temporarily its special significance by typing another special character, the backslash (\\), before it. .DS I 1i :\|\fBs/\\\\\&$/dollar/ .R .DE looks for the character ``$'' in the current line and replaces it by the word ``dollar''. Were it not for the backslash, the ``$'' would have represented ``the end of the line'' in your search rather than the character ``$''. The backslash retains its special significance unless it is preceded by another backslash. .SH Issuing \s-2UNIX\s0 commands from the editor .PP After creating several files with the editor, you may want to delete files no longer useful to you or ask for a list of your files. Removing and listing files are not functions of the editor, and so they require the use of \s-2UNIX\s0 system commands (also referred to as ``shell'' commands, as ``shell'' is the name of the program that processes \s-2UNIX\s0 commands). You do not need to quit the editor to execute a \s-2UNIX\s0 command as long as you indicate that it is to be sent to the shell for execution. To use the \s-2UNIX\s0 command .B rm to remove the file named ``junk'' type: .DS I 1i :\|\fB!rm junk .R ! : .DE The exclamation mark (!) indicates that the rest of the line is to be processed as a shell command. If the buffer contents have not been written since the last change, a warning will be printed before the command is executed: .DS I 1i [No write since last change] .DE The editor prints a ``!'' when the command is completed. Other tutorials describe useful features of the system, of which an editor is only one part. .SH Filenames and file manipulation .PP Throughout each editing session, edit keeps track of the name of the file being edited as the .I "current filename." Edit remembers as the current filename the name given when you entered the editor. The current filename changes whenever the edit (e) command is used to specify a new file. Once edit has recorded a current filename, it inserts that name into any command where a filename has been omitted. If a write command does not specify a file, edit, as we have seen, supplies the current filename. If you are editing a file named ``draft3'' having 283 lines in it, you can have the editor write onto a different file by including its name in the write command: .DS I 1i :\fB\|w chapter3 .R "chapter3" [new file] 283 lines, 8698 characters .DE The current filename remembered by the editor .I will not be changed as a result of the write command. .R Thus, if the next write command does not specify a name, edit will write onto the current file (``draft3'') and not onto the file ``chapter3''. .SH The file (f) command .PP To ask for the current filename, type .B file (or .B f ). In response, the editor provides current information about the buffer, including the filename, your current position, the number of lines in the buffer, and the percent of the distance through the file your current location is. .DS I 1i :\|\fBf .R "text" [Modified] line 3 of 4 --75%-- .DE .\"The expression ``[Edited]'' indicates that the buffer contains .\"either the editor's copy of the existing file ``text'' .\"or a file which you are just now creating. If the contents of the buffer have changed since the last time the file was written, the editor will tell you that the file has been ``[Modified]''. After you save the changes by writing onto a disk file, the buffer will no longer be considered modified: .DS I 1i :\|\fBw .R "text" 4 lines, 88 characters :\|\fBf .R "text" line 3 of 4 --75%-- .DE .SH Reading additional files (r) .PP The \f3read (r)\f1 command allows you to add the contents of a file to the buffer at a specified location, essentially copying new lines between two existing lines. To use it, specify the line after which the new text will be placed, the \f3read (r)\f1 command, and then the name of the file. If you have a file named ``example'', the command .DS I 1i :\|\fB$r example .R "example" 18 lines, 473 characters .DE reads the file ``example'' and adds it to the buffer after the last line. The current filename is not changed by the read command. .SH Writing parts of the buffer .PP The .B write (w) .R command can write all or part of the buffer to a file you specify. We are already familiar with writing the entire contents of the buffer to a disk file. To write only part of the buffer onto a file, indicate the beginning and ending lines before the write command, for example .DS I 1i :\|\fB45,$w ending .R .DE Here all lines from 45 through the end of the buffer are written onto the file named .I ending. The lines remain in the buffer as part of the document you are editing, and you may continue to edit the entire buffer. Your original file is unaffected by your command to write part of the buffer to another file. Edit still remembers whether you have saved changes to the buffer in your original file or not. .SH Recovering files .PP Although it does not happen very often, there are times \s-2UNIX\s+2 stops working because of some malfunction. This situation is known as a \fIcrash\fR. Under most circumstances, edit's crash recovery feature is able to save work to within a few lines of changes before a crash (or an accidental phone hang up). If you lose the contents of an editing buffer in a system crash, you will normally receive mail when you login that gives the name of the recovered file. To recover the file, enter the editor and type the command .B recover (\fBrec\fR), followed by the name of the lost file. For example, to recover the buffer for an edit session involving the file ``chap6'', the command is: .DS I 1i .R :\|\fBrecover chap6 .R .DE Recover is sometimes unable to save the entire buffer successfully, so always check the contents of the saved buffer carefully before writing it back onto the original file. For best results, write the buffer to a new file temporarily so you can examine it without risk to the original file. Unfortunately, you cannot use the recover command to retrieve a file you removed using the shell command \f3rm\f1. .SH Other recovery techniques .PP If something goes wrong when you are using the editor, it may be possible to save your work by using the command .B preserve (\fBpre\fR), which saves the buffer as if the system had crashed. If you are writing a file and you get the message ``Quota exceeded'', you have tried to use more disk storage than is allotted to your account. .I Proceed with caution .R because it is likely that only a part of the editor's buffer is now present in the file you tried to write. In this case you should use the shell escape from the editor (!) to remove some files you don't need and try to write the file again. If this is not possible and you cannot find someone to help you, enter the command .DS I 1i :\|\fBpreserve .R .DE and wait for the reply, .DS I 1i File preserved. .DE If you do not receive this reply, seek help immediately. Do not simply leave the editor. If you do, the buffer will be lost, and you may not be able to save your file. If the reply is ``File preserved.'' you can leave the editor (or logout) to remedy the situation. After a preserve, you can use the recover command once the problem has been corrected, or the \fB\-r\fR option of the edit command if you leave the editor and want to return. .PP If you make an undesirable change to the buffer and type a write command before discovering your mistake, the modified version will replace any previous version of the file. Should you ever lose a good version of a document in this way, do not panic and leave the editor. As long as you stay in the editor, the contents of the buffer remain accessible. Depending on the nature of the problem, it may be possible to restore the buffer to a more complete state with the undo command. After fixing the damaged buffer, you can again write the file to disk. .SH Further reading and other information .PP Edit is an editor designed for beginning and casual users. It is actually a version of a more powerful editor called .I ex. These lessons are intended to introduce you to the editor and its more commonly-used commands. We have not covered all of the editor's commands, but a selection of commands that should be sufficient to accomplish most of your editing tasks. You can find out more about the editor in the .I Ex Reference Manual, .R which is applicable to both .I ex and .I edit. One way to become familiar with the manual is to begin by reading the description of commands that you already know. .bd I 3 .SH Using .I ex .fl .bd I .PP As you become more experienced with using the editor, you may still find that edit continues to meet your needs. However, should you become interested in using .I ex, it is easy to switch. To begin an editing session with .I ex, use the name .B ex in your command instead of .B edit. .PP Edit commands also work in .I ex, but the editing environment is somewhat different. You should be aware of a few differences between .I ex and .I edit. In edit, only the characters ``^'', ``$'', and ``\\'' have special meanings in searching the buffer or indicating characters to be changed by a substitute command. Several additional characters have special meanings in ex, as described in the .I Ex Reference Manual. .R Another feature of the edit environment prevents users from accidently entering two alternative modes of editing, .I open and .I visual, in which the editor behaves quite differently from normal command mode. If you are using ex and you encounter strange behavior, you may have accidently entered open mode by typing ``o''. Type the \s-2ESC\s0 key and then a ``Q'' to get out of open or visual mode and back into the regular editor command mode. The document .I An Introduction to Display Editing with Vi\|\| .R provide full details of visual mode. .bp .SH .ce 1 \s+2Index\s0 .LP .sp 2 .2C .nf addressing, \fIsee\fR line numbers ampersand, 20 append mode, 6-7 append (a) command, 6, 7, 9 ``At end of file'' (message), 18 backslash (\\), 21 buffer, 3 caret (^), 10, 20 change (c) command, 18 command mode, 5-6 ``Command not found'' (message), 6 context search, 10-12, 19-21 control characters (``^'' notation), 10 control-H, 7 copy (co) command, 15 corrections, 7, 16 current filename, 21 current line (\|.\|), 11, 17 delete (d) command, 15-16 dial-up, 5 disk, 3 documentation, 3, 23 dollar ($), 10, 11, 17, 20-21 dot (\f3\|.\|\f1) 11, 17 edit (text editor), 3, 5, 23 edit (e) command, 5, 9, 14 editing commands: .in +.25i append (a), 6, 7, 9 change (c), 18 copy (co), 15 delete (d), 15-16 edit (text editor), 3, 5, 23 edit (e), 5, 9, 14 file (f), 21-22 global (g), 19 move (m), 14-15 number (nu), 11 preserve (pre), 22-23 print (p), 10 quit (q), 8, 13 read (r), 22 recover (rec), 22, 23 substitute (s), 11-12, 19, 20 undo (u), 16-17, 23 write (w), 8, 13, 21, 22 z, 12-13 ! (shell escape), 21 $=, 17 +, 17 \-, 17 //, 12, 20 ??, 20 \&., 11, 17 \&.=, 11, 17 .in -.25i entering text, 3, 6-7 erasing .in +.25i characters (^H), 7 lines (@), 7 .in -.25i error corrections, 7, 16 ex (text editor), 23 \fIEx Reference Manual\fR, 23 exclamation (!), 21 file, 3 file (f) command, 21-22 file recovery, 22-23 filename, 3, 21 global (g) command, 19 input mode, 6-7 Interrupt (message), 9 line numbers, \fIsee also\fR current line .in +.25i dollar sign ($), 10, 11, 17 dot (\|.\|), 11, 17 relative (+ and \-), 17 .in -.25i list, 10 logging in, 4-6 logging out, 8 ``Login incorrect'' (message), 5 minus (\-), 17 move (m) command, 14-15 ``Negative address\(emfirst buffer line is 1'' (message), 18 ``No current filename'' (message), 8 ``No such file or directory'' (message), 5, 6 ``No write since last change'' (message), 21 non-printing characters, 10 ``Nonzero address required'' (message), 18 ``Not an editor command'' (message), 6 ``Not that many lines in buffer'' (message), 18 number (nu) command, 11 password, 5 period (\|.\|), 11, 17 plus (+), 17 preserve (pre) command, 22-23 print (p) command, 10 program, 3 prompts .in .25i % (\s-2UNIX\s0), 5 : (edit), 5, 6, 7 \0 (append), 7 .in -.25i question (?), 20 quit (q) command, 8, 13 read (r) command, 22 recover (rec) command, 22, 23 recovery, \fIsee\fR\| file recovery references, 3, 23 remove (rm) command, 21, 22 reverse command effects (undo), 16-17, 23 searching, 10-12, 19-21 shell, 21 shell escape (!), 21 slash (/), 11-12, 20 special characters (^, $, \\), 10, 11, 17, 20-21 substitute (s) command, 11-12, 19, 20 terminals, 4-5 text input mode, 7 undo (u) command, 16-17, 23 \s-1UNIX\s0, 3 write (w) command, 8, 13, 21, 22 z command, 12-13 vigor-0.016.orig/docs/USD.doc/vi.ref/0040755000076400007640000000000007103707243015614 5ustar cjw44cjw44vigor-0.016.orig/docs/USD.doc/vi.ref/Makefile0100644000076400007640000000131507103707242017250 0ustar cjw44cjw44# @(#)Makefile 8.20 (Berkeley) 8/18/96 MACROS= -me ROFF= groff TBL= tbl all: vi.ref.txt vi.ref.ps vi.ref.txt: vi.ref index.so soelim vi.ref | ${TBL} | groff ${MACROS} -Tascii > $@ rm -f index chmod 444 $@ vi.ref.ps: vi.ref index.so soelim vi.ref | ${TBL} | ${ROFF} ${MACROS} > $@ rm -f index chmod 444 $@ index.so: vi.ref # Build index.so, side-effect of building the paper. soelim vi.ref | ${TBL} | ${ROFF} ${MACROS} > /dev/null sed -e 's/MINUSSIGN/\\-/' \ -e 's/DOUBLEQUOTE/""/' \ -e "s/SQUOTE/'/" \ -e 's/ /__SPACE/g' < index | \ sort -u '-t ' +0 -1 +1n | awk -f merge.awk | \ sed -e 's/__SPACE/ /g' > $@ rm -f index chmod 444 $@ clean: rm -f vi.ref.ps vi.ref.txt index index.so vigor-0.016.orig/docs/USD.doc/vi.ref/ex.cmd.roff0100644000076400007640000011767607103707242017666 0ustar cjw44cjw44.\" Copyright (c) 1994 .\" The Regents of the University of California. All rights reserved. .\" Copyright (c) 1994, 1995, 1996 .\" Keith Bostic. All rights reserved. .\" .\" See the LICENSE file for redistribution information. .\" .\" @(#)ex.cmd.roff 8.41 (Berkeley) 8/17/96 .\" .SH 1 "Ex Description" .pp The following words have special meanings for .CO ex commands. .KY "" .IP "" The end-of-file character is used to scroll the screen in the .CO ex editor. This character is normally .LI . However, whatever character is set for the current terminal is supported as well as .LI . .KY "line" .IP "line" A single-line address, given in any of the forms described in the section entitled .QB "Ex Addressing" . The default for .LI line is the current line. .KY "range" .IP "range" A line, or a pair of line addresses, separated by a comma or semicolon. (See the section entitled .QB "Ex Addressing" for more information.) The default for range is the current line .i only , i.e. .QT \&.,. . A percent sign .PQ % stands for the range .QT 1,$ . The starting address must be less than, or equal to, the ending address. .KY "count" .IP "count" A positive integer, specifying the number of lines to be affected by the command; the default is 1. Generally, a count past the end-of-file may be specified, e.g. the command .QT "p 3000" in a 10 line file is acceptable, and will print from the current line through the last line in the file. .KY "flags" .IP "flags" One or more of the characters .QQ # , .QQ p , and .QQ l . When a command that accepts these flags completes, the addressed line(s) are written out as if by the corresponding .CO # , .CO l or .CO p commands. In addition, any number of .QT + or .QT \- characters can be specified before, after, or during the flags, in which case the line written is not necessarily the one affected by the command, but rather the line addressed by the offset address specified. The default for .LI flags is none. .KY "file" .IP "file" A pattern used to derive a pathname; the default is the current file. File names are subjected to normal .XR sh 1 word expansions. .pp Anywhere a file name is specified, it is also possible to use the special string .QT /tmp . This will be replaced with a temporary file name which can be used for temporary work, e.g. .QT ":e /tmp" creates and edits a new file. .pp If both a count and a range are specified for commands that use either, the starting line for the command is the .i last line addressed by the range, and .LI count - 1 subsequent lines are affected by the command, e.g. the command .QT 2,3p4 prints out lines 3, 4, 5 and 6. .pp When only a line or range is specified, with no command, the implied command is either a .CO list , .CO number or .CO print command. The command used is the most recent of the three commands to have been used (including any use as a flag). If none of these commands have been used before, the .CO print command is the implied command. When no range or count is specified and the command line is a blank line, the current line is incremented by 1 and then the current line is displayed. .pp Zero or more whitespace characters may precede or follow the addresses, count, flags, or command name. Any object following a command name (such as buffer, file, etc.), that begins with an alphabetic character, should be separated from the command name by at least one whitespace character. .pp Any character, including .LI , .QT % and .QT # retain their literal value when preceded by a backslash. .SH 1 "Ex Commands" .pp The following section describes the commands available in the .CO ex editor. In each entry below, the tag line is a usage synopsis for the command. .pp Each command can be entered as the abbreviation (those characters in the synopsis command word preceding the .QQ [ character), the full command (all characters shown for the command word, omitting the .QQ [ and .QQ ] characters), or any leading subset of the full command down to the abbreviation. For example, the args command (shown as .QT ar[gs] in the synopsis) can be entered as .QT ar , .QT arg or .QT args . .pp Each .CO ex command described below notes the new current line after it is executed, as well as any options that affect the command. .\" I cannot get a double quote to print to save my life. The ONLY way .\" I've been able to get this to work is with the .tr command. .tr Q" .ds ms Q .KY DOUBLEQUOTE .IP "\*(ms" .tr QQ A comment. Command lines beginning with the double-quote character .PQ """" are ignored. This permits comments in editor scripts and startup files. .KY "" .KY "" .IP "" .IP "" Scroll the screen. Write the next N lines, where N is the value of the .OP scroll option. The command is the end-of-file terminal character, which may be different on different terminals. Traditionally, it is the .LI key. .sp Historically, the .CO eof command ignored any preceding count, and the .LI character was ignored unless it was entered as the first character of the command. This implementation treats it as a command .i only if entered as the first character of the command line, and otherwise treats it as any other character. .SS .SP Line: Set to the last line written. .SP Options: Affected by the .OP scroll option. .SE .KY "!" .IP "! argument(s)" .Ip "[range]! argument(s)" Execute a shell command, or filter lines through a shell command. In the first synopsis, the remainder of the line after the .QT ! character is passed to the program named by the .OP shell option, as a single argument. .sp Within the rest of the line, .QT % and .QT # are expanded into the current and alternate pathnames, respectively. The character .QT ! is expanded with the command text of the previous .CO ! command. (Therefore, the command .CO !! repeats the previous .CO ! command.) The special meanings of .QT % , .QT # , and .QT ! can be overridden by escaping them with a backslash. If no .CO ! or .CO :! command has yet been executed, it is an error to use an unescaped .QT ! character. The .CO ! command does .i not do shell expansion on the strings provided as arguments. If any of the above expansions change the command the user entered, the command is redisplayed at the bottom of the screen. .sp .CO Ex then executes the program named by the .OP shell option, with a .b \-c flag followed by the arguments (which are bundled into a single argument). .sp The .CO ! command is permitted in an empty file. .sp If the file has been modified since it was last completely written, the .Co ! command will warn you. .sp A single .QT ! character is displayed when the command completes. .sp In the second form of the .CO ! command, the remainder of the line after the .QT ! is passed to the program named by the .OP shell option, as described above. The specified lines are passed to the program as standard input, and the standard and standard error output of the program replace the original lines. .SS .SP Line: Unchanged if no range was specified, otherwise set to the first line of the range. .SP Options: Affected by the .OP shell and .OP warn options. .SE .KY "#" .IP "[range] # [count] [flags]" .KY "number" .Ip "[range] nu[mber] [count] [flags]" Display the selected lines, each preceded with its line number. .sp The line number format is .QQ %6d , followed by two spaces. .SS .SP Line: Set to the last line displayed. .SP Options: Affected by the .OP list option. .SE .KY "@" .IP "@ buffer" .KY "*" .Ip "* buffer" Execute a buffer. Each line in the named buffer is executed as an .CO ex command. If no buffer is specified, or if the specified buffer is .QT @ or .QT * , the last buffer executed is used. .KY < .IP "[range] <[< ...] [count] [flags]" Shift lines left or right. The specified lines are shifted to the left (for the .CO < command) or right (for the .CO > command), by the number of columns specified by the .OP shiftwidth option. Only leading whitespace characters are deleted when shifting left; once the first column of the line contains a nonblank character, the .CO shift command will succeed, but the line will not be modified. .sp If the command character .CO < or .CO > is repeated more than once, the command is repeated once for each additional command character. .SS .SP Line: If the current line is set to one of the lines that are affected by the command, it is unchanged. Otherwise, it is set to the first nonblank character of the lowest numbered line shifted. .SP Options: Affected by the .OP shiftwidth option. .SE .KY = .IP "[line] = [flags]" Display the line number of .LI line (which defaults to the last line in the file). .SS .SP Line: Unchanged. .SP Options: None. .SE .KY > .IP "[range] >[> ...] [count] [flags]" Shift right. The specified lines are shifted to the right by the number of columns specified by the .OP shiftwidth option, by inserting tab and space characters. Empty lines are not changed. .sp If the command character .QT > is repeated more than once, the command is repeated once for each additional command character. .SS .SP Line: Set to the last line modified by the command. .SP Options: Affected by the .OP shiftwidth option. .SE .KY abbrev .IP "ab[brev] lhs rhs" Add an abbreviation to the current abbreviation list. When inserting text in .CO vi , each time a non-word character is entered after a word character, a set of characters ending at the word character are checked for a match with .LI lhs . If a match is found, they are replaced with .LI rhs . The set of characters that are checked for a match are defined as follows, for inexplicable historical reasons. If only one or two characters were entered before the non-word character that triggered the check, and after the beginning of the insertion, or the beginning of the line or the file, or the last .LI character that was entered, then the one or the both characters are checked for a match. Otherwise, the set includes both characters, as well as the characters that precede them that are the same word class (i.e. word or non-word) as the .b second to last character entered before the non-word character that triggered the check, back to the first .LI character, the beginning of the insertion, or the beginning of the line or the file. .sp For example, the abbreviations: .sp .ne 3v .ft C .TS r l l. :abbreviate abc ABC :abbreviate #i #include :abbreviate /*#i /*#include .TE .ft R will all work, while the abbreviations: .sp .ne 2v .ft C .TS r l l. :abbreviate a#i A#include :abbreviate /* /******************** .TE .ft R will not work, and are not permitted by .CO nvi . .sp To keep the abbreviation expansion from happening, the character immediately following the .LI lhs characters should be quoted with a .LI character. .sp The replacement .LI rhs is itself subject to both further abbreviation expansion and further map expansion. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY append .IP "[line] a[ppend][!]" The input text is appended to the specified line. If line 0 is specified, the text is inserted at the beginning of the file. Set to the last line input. If no lines are input, then set to .LI line , or to the first line of the file if a .LI line of 0 was specified. Following the command name with a .QT ! character causes the .OP autoindent option to be toggled for the duration of the command. .SS .SP Line: Unchanged. .SP Options: Affected by the .OP autoindent and .OP number options. .SE .KY args .IP "ar[gs]" Display the argument list. The current argument is displayed inside of .QT [ and .QT ] characters. The argument list is the list of operands specified on startup, which can be replaced using the .CO next command. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY bg .IP bg .CO Vi mode only. Background the current screen. The screen is unchanged, but is no longer accessible and disappears from the display. Use the .CO fg command to bring the screen back to the display foreground. .SS .SP Line: Set to the current line when the screen was last edited. .SP Options: None. .SE .KY change .IP "[range] c[hange][!] [count]" Replace the lines with input text. Following the command name with a .QT ! character causes the .OP autoindent option to be toggled for the duration of the command. .SS .SP Line: Set to the last line input, or, if no lines were input, set to the line before the target line, or to the first line of the file if there are no lines preceding the target line. .SP Options: Affected by the .OP autoindent and .OP number options. .SE .KY cd .KY chdir .IP "chd[ir][!] [directory]" .Ip "cd[!] [directory]" Change the current working directory. The .LI directory argument is subjected to .XR sh 1 word expansions. When invoked with no directory argument and the .LI HOME environment variable is set, the directory named by the .LI HOME environment variable becomes the new current directory. Otherwise, the new current directory becomes the directory returned by the .XR getpwent 3 routine. .sp The .CO chdir command will fail if the file has been modified since the last complete write of the file. You can override this check by appending a .QT ! character to the command. .SS .SP Line: Unchanged. .SP Options: Affected by the .OP cdpath option. .SE .KY copy .KY t .IP "[range] co[py] line [flags]" .Ip "[range] t line [flags]" Copy the specified lines (range) after the destination line. Line 0 may be specified to insert the lines at the beginning of the file. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY cscope .IP "cs[cope] command [args]" Execute a .CO cscope command. For more information, see the section of the reference manual entitled .QB "Tags, Tag Stacks, and Cscope" . .KY delete .IP "[range] d[elete] [buffer] [count] [flags]" Delete the lines from the file. The deleted text is saved in the specified buffer, or, if no buffer is specified, in the unnamed buffer. If the command name is followed by a letter that could be interpreted as either a buffer name or a flag value (because neither a .LI count or .LI flags values were given), .CO ex treats the letter as a .LI flags value if the letter immediately follows the command name, without any whitespace separation. If the letter is preceded by whitespace characters, it treats it as a buffer name. .SS .SP Line: Set to the line following the deleted lines, or to the last line if the deleted lines were at the end. .SP Options: None. .SE .KY display .IP "di[splay] b[uffers] | c[onnections] | s[creens] | t[ags]" Display buffers, .CO cscope connections, screens or tags. The .CO display command takes one of three additional arguments, which are as follows: .SS .SP b[uffers] Display all buffers (including named, unnamed, and numeric) that contain text. .SP c[onnections] Display the source directories for all attached .CO cscope databases. .SP s[creens] Display the file names of all background screens. .SP t[ags] Display the tags stack. .SE .SS .SP Line: Unchanged. .SP Options: None. .SE .KY edit .IP "e[dit][!] [+cmd] [file]" .Ip "ex[!] [+cmd] [file]" Edit a different file. If the current buffer has been modified since the last complete write, the command will fail. You can override this by appending a .QT ! character to the command name. .sp If the .QT +cmd option is specified, that .CO ex command will be executed in the new file. Any .CO ex command may be used, although the most common use of this feature is to specify a line number or search pattern to set the initial location in the new file. .sp Capitalizing the first letter of the command, i.e. .CO Edit or .CO Ex , while in .CO vi mode, will edit the file in a new screen. In this case, any modifications to the current file are ignored. .SS .SP Line: If you have previously edited the file, the current line will be set to your last position in the file. If that position does not exist, or you have not previously edited the file, the current line will be set to the first line of the file if you are in .CO vi mode, and the last line of the file if you are in .CO ex . .SP Options: None. .SE .KY exusage .IP "exu[sage] [command]" Display usage for an .CO ex command. If .LI command is specified, a usage statement for that command is displayed. Otherwise, usage statements for all .CO ex commands are displayed. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY file .IP "f[ile] [file]" Display and optionally change the file name. If a file name is specified, the current pathname is changed to the specified name. The current pathname, the number of lines, and the current position in the file are displayed. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY fg .IP "fg [name]" .CO Vi mode only. Foreground the specified screen. If the argument name doesn't exactly match the name of a file displayed by a background screen, it is compared against the last component of each of the file names. If no background screen is specified, the first background screen is foregrounded. .sp By default, foregrounding causes the current screen to be swapped with the backgrounded screen. Capitalizing the first letter of the command, i.e. .CO Fg , will foreground the backgrounded screen in a new screen instead of swapping it with the current screen. .SS .SP Line: Set to the current line when the screen was last edited. .SP Options: None. .SE .KY global .IP "[range] g[lobal] /pattern/ [commands]" .KY v .Ip "[range] v /pattern/ [commands]" Apply commands to lines matching (or not matching) a pattern. The lines within the given range that match .PQ g[lobal] , or do not match .PQ v the given pattern are selected. Then, the specified .CO ex command(s) are executed with the current line .PQ \&. set to each selected line. If no range is specified, the entire file is searched for matching, or not matching, lines. .sp Multiple commands can be specified, one per line, by escaping each .LI character with a backslash, or by separating commands with a .QT | character. If no commands are specified, the command defaults to the .CO print command. .sp For the .CO append , .CO change and .CO insert commands, the input text must be part of the global command line. In this case, the terminating period can be omitted if it ends the commands. .sp The .CO visual command may also be specified as one of the .CO ex commands. In this mode, input is taken from the terminal. Entering a .CO Q command in .CO vi mode causes the next line matching the pattern to be selected and .CO vi to be reentered, until the list is exhausted. .sp The .CO global , .CO v and .CO undo commands cannot be used as part of these commands. .sp The editor options .OP autoindent , .OP autoprint and .OP report are turned off for the duration of the .CO global and .CO v commands. .SS .SP Line: The last line modified. .SP Options: Affected by the .OP ignorecase and .OP magic options. Turns off the .OP autoindent , .OP autoprint and .OP report options. .SE .KY help .IP "he[lp]" Display a help message. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY insert .IP "[line] i[nsert][!]" The input text is inserted before the specified line. Following the command name with a .QT ! character causes the .OP autoindent option setting to be toggled for the duration of this command. .SS .SP Line: Set to the last line input; if no lines were input, set to the line before the target line, or to the first line of the file if there are no lines preceding the target line. Affected by the .OP autoindent and .OP number options. .SE .KY join .IP "[range] j[oin][!] [count] [flags]" Join lines of text together. .sp A .LI count specified to the .Sy join command specifies that the last line of the .LI range plus .LI count subsequent lines will be joined. (Note, this differs by one from the general rule where only .LI count - 1 subsequent lines are affected.) .sp If the current line ends with a whitespace character, all whitespace is stripped from the next line. Otherwise, if the next line starts with a open parenthesis .PQ ( , do nothing. Otherwise, if the current line ends with a question mark .PQ ? , period .PQ \&. or exclamation point .PQ ! , insert two spaces. Otherwise, insert a single space. .sp Appending a .QT ! character to the command name causes a simpler join with no white-space processing. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY list .IP "[range] l[ist] [count] [flags]" Display the lines unambiguously. Tabs are displayed as .QT ^I , and the end of the line is marked with a .QT $ character. .SS .SP Line: Set to the last line displayed. .SP Options: Affected by the .OP number option. .SE .KY map .IP "map[!] [lhs rhs]" Define or display maps (for .CO vi only). .sp If .QT lhs and .QT rhs are not specified, the current set of command mode maps are displayed. If a .QT ! character is appended to to the command, the text input mode maps are displayed. .sp Otherwise, when the .QT lhs character sequence is entered in .CO vi , the action is as if the corresponding .QT rhs had been entered. If a .QT ! character is appended to the command name, the mapping is effective during text input mode, otherwise, it is effective during command mode. This allows .QT lhs to have two different macro definitions at the same time: one for command mode and one for input mode. .sp Whitespace characters require escaping with a .LI character to be entered in the .LI lhs string in visual mode. .sp Normally, keys in the .LI rhs string are remapped (see the .OP remap option), and it is possible to create infinite loops. However, keys which map to themselves are not further remapped, regardless of the setting of the .OP remap option. For example, the command .QT ":map n nz." maps the .QT n key to the .CO n and .CO z commands. .sp To exit an infinitely looping map, use the terminal .LI character. .SS .SP Line: Unchanged. .SP Options: Affected by the .OP remap option. .SE .KY mark .KY k .IP "[line] ma[rk] " .Ip "[line] k " Mark the line with the mark .LI . The expressions .QT ' and .QT ` can then be used as an address in any command that uses one. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY move .IP "[range] m[ove] line" Move the specified lines after the target line. A target line of 0 places the lines at the beginning of the file. .SS .SP Line: Set to the first of the moved lines. .SP Options: None. .SE .KY mkexrc .IP "mk[exrc][!] file" Write the abbreviations, editor options and maps to the specified file. Information is written in a form which can later be read back in using the .CO ex .CO source command. If .LI file already exists, the .CO mkexrc command will fail. This check can be overridden by appending a .QT ! character to the command. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY next .IP "n[ext][!] [file ...]" Edit the next file from the argument list. The .CO next command will fail if the file has been modified since the last complete write. This check can be overridden by appending the .QT ! character to the command name. The argument list can optionally be replaced by specifying a new one as arguments to this command. In this case, editing starts with the first file on the new list. .sp Capitalizing the first letter of the command, i.e. .CO Next , while in .CO vi mode, will set the argument list and edit the file in a new screen. In this case, any modifications to the current file are ignored. .SS .SP Line: Set as described for the .CO edit command. .SP Options: Affected by the options .OP autowrite and .OP writeany . .SE .KY open .IP "[line] o[pen] /pattern/ [flags]" Enter open mode. Open mode is the same as being in .CO vi , but with a one-line window. All the standard .CO vi commands are available. If a match is found for the optional RE argument, the cursor is set to the start of the matching pattern. .sp .i "This command is not yet implemented." .SS .SP Line: Unchanged, unless the optional RE is specified, in which case it is set to the line where the matching pattern is found. .SP Options: Affected by the .OP open option. .SE .KY preserve .IP "pre[serve]" Save the file in a form that can later be recovered using the .CO ex .b \-r option. When the file is preserved, an email message is sent to the user. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY previous .IP "prev[ious][!]" Edit the previous file from the argument list. The .CO previous command will fail if the file has been modified since the last complete write. This check can be overridden by appending the .QT ! character to the command name. .sp Capitalizing the first letter of the command, i.e. .CO Previous , while in .CO vi mode, will edit the file in a new screen. In this case, any modifications to the current file are ignored. .SS .SP Line: Set as described for the .CO edit command. .SP Options: Affected by the options .OP autowrite and .OP writeany . None. .SE .KY print .IP "[range] p[rint] [count] [flags]" Display the specified lines. .SS .SP Line: Set to the last line displayed. .SP Options: Affected by the .OP list and .OP number option. .SE .KY put .IP "[line] pu[t] [buffer]" Append buffer contents to the current line. If a buffer is specified, its contents are appended to the line, otherwise, the contents of the unnamed buffer are used. .SS .SP Line: Set to the line after the current line. .SP Options: None. .SE .KY quit .IP "q[uit][!]" End the editing session. If the file has been modified since the last complete write, the .CO quit command will fail. This check may be overridden by appending a .QT ! character to the command. .sp If there are more files to edit, the .CO quit command will fail. Appending a .QT ! character to the command name or entering two .CO quit commands (i.e. .CO wq , .CO quit , .CO xit or .CO ZZ ) in a row) will override this check and the editor will exit. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY read .IP "[line] r[ead][!] [file]" Read a file. A copy of the specified file is appended to the line. If .LI line is 0, the copy is inserted at the beginning of the file. If no file is specified, the current file is read; if there is no current file, then .LI file becomes the current file. If there is no current file and no .LI file is specified, then the .CO read command will fail. .sp If .LI file is preceded by a .QT ! character, .LI file is treated as if it were a shell command, and passed to the program named by the .OP shell edit option. The standard and standard error outputs of that command are read into the file after the specified line. The special meaning of the .QT ! character can be overridden by escaping it with a backslash .PQ \e character. .SS .SP Line: When executed from .CO ex , the current line is set to the last line read. When executed from .CO vi , the current line is set to the first line read. .SP Options: None. .SE .KY recover .IP "rec[over] file" Recover .LI file if it was previously saved. If no saved file by that name exists, the .CO recover command behaves equivalently to the .CO edit command. .SS .SP Line: Set as described for the .CO edit command. .SP Options: None. .SE .KY resize .IP "res[ize] [+|-]size" .CO Vi mode only. Grow or shrink the current screen. If .LI size is a positive, signed number, the current screen is grown by that many lines. If .LI size is a negative, signed number, the current screen is shrunk by that many lines. If .LI size is not signed, the current screen is set to the specified .LI size . Applicable only to split screens. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY rewind .IP "rew[ind][!]" Rewind the argument list. If the current file has been modified since the last complete write, the .CO rewind command will fail. This check may be overridden by appending the .QT ! character to the command. .sp Otherwise, the current file is set to the first file in the argument list. .SS .SP Line: Set as described for the .CO edit command. .SP Options: Affected by the .OP autowrite and .OP writeany options. .SE .KY set .IP "se[t] [option[=[value]] ...] [nooption ...] [option? ...] [all]" Display or set editor options. When no arguments are specified, the editor option .OP term , and any editor options whose values have been changed from the default settings are displayed. If the argument .LI all is specified, the values of all of editor options are displayed. .sp Specifying an option name followed by the character .QT ? causes the current value of that option to be displayed. The .QT ? can be separated from the option name by whitespace characters. The .QT ? is necessary only for Boolean valued options. Boolean options can be given values by the form .QT "set option" to turn them on, or .QT "set nooption" to turn them off. String and numeric options can be assigned by the form .QT "set option=value" . Any whitespace characters in strings can be included literally by preceding each with a backslash. More than one option can be set or listed by a single set command, by specifying multiple arguments, each separated from the next by whitespace characters. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY shell .IP "sh[ell]" Run the shell program. The program named by the .OP shell option is run with a .b \-i (for interactive) flag. Editing is resumed when that program exits. .SS .SP Line: Unchanged. .SP Options: Affected by the .OP shell option. .SE .KY source .IP "so[urce] file" Read and execute .CO ex commands from a file. .CO Source commands may be nested. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY substitute .IP "[range] s[ubstitute] [/pattern/replace/] [options] [count] [flags]" .KY & .Ip "[range] & [options] [count] [flags]" .KY ~ .Ip "[range] ~ [options] [count] [flags]" Make substitutions. Replace the first instance of .LI pattern with the string .LI replace on the specified line(s). If the .QT /pattern/repl/ argument is not specified, the .QT /pattern/repl/ from the previous .CO substitute command is used. Any character other than an alphabetic, numeric, or backslash character may be used as the delimiter. .sp If .LI options includes the letter .QT c (confirm), you will be prompted for confirmation before each replacement is done. An affirmative response (in English, a .QT y character) causes the replacement to be made. A quit response (in English, a .QT q character) causes the .CO substitute command to be terminated. Any other response causes the replacement not to be made, and the .CO substitute command continues. If .LI options includes the letter .QT g (global), all nonoverlapping instances of .LI pattern in the line are replaced. .sp The .CO & version of the command is the same as not specifying a pattern or replacement string to the .CO substitute command, and the .QT & is replaced by the pattern and replacement information from the previous substitute command. .sp The .CO ~ version of the command is the same as .CO & and .CO s , except that the search pattern used is the last RE used in .i any command, not necessarily the one used in the last .CO substitute command. .sp For example, in the sequence .ft C .(b s/red/blue/ /green ~ .)b .ft R the .QT ~ is equivalent to .QT s/green/blue/ . .sp The .CO substitute command may be interrupted, using the terminal interrupt character. All substitutions completed before the interrupt are retained. .SS .SP Line: Set to the last line upon which a substitution was made. .SP Options: Affected by the .OP ignorecase and .OP magic option. .SE .KY suspend .IP "su[spend][!]" .KY stop .Ip "st[op][!]" .KY .Ip Suspend the edit session. Appending a .QT ! character to these commands turns off the .OP autowrite option for the command. .SS .SP Line: Unchanged. .SP Options: Affected by the .OP autowrite and .OP writeany options. .SE .KY tag .IP "ta[g][!] tagstring" Edit the file containing the specified tag. If the tag is in a different file, then the new file is edited. If the current file has been modified since the last complete write, the .CO tag command will fail. This check can be overridden by appending the .QT ! character to the command name. .sp The .CO tag command searches for .LI tagstring in the tags file(s) specified by the .Op tags option. (See .XR ctags 1 for more information on tags files.) .sp Capitalizing the first letter of the command, i.e. .CO Tag , while in .CO vi mode, will edit the file in a new screen. In this case, any modifications to the current file are ignored. .SS .SP Line: Set to the line indicated by the tag. .SP Options: Affected by the .OP autowrite , .OP taglength , .OP tags and .OP writeany options. .SE .KY tagnext .IP "tagn[ext][!]" Edit the file containing the next context for the current tag. If the context is in a different file, then the new file is edited. If the current file has been modified since the last complete write, the .CO tagnext command will fail. This check can be overridden by appending the .QT ! character to the command name. .sp Capitalizing the first letter of the command, i.e. .CO Tagnext , while in .CO vi mode, will edit the file in a new screen. In this case, any modifications to the current file are ignored. .SS .SP Line: Set to the line indicated by the tag. .SP Options: Affected by the .OP autowrite and .OP writeany options. .SE .KY tagpop .IP "tagp[op][!] [file | number]" Pop to the specified tag in the tags stack. If neither .LI file or .LI number is specified, the .CO tagpop command pops to the most recent entry on the tags stack. If .LI file or .LI number is specified, the .CO tagpop command pops to the most recent entry in the tags stack for that file, or numbered entry in the tags stack, respectively. (See the .CO display command for information on displaying the tags stack.) .sp If the file has been modified since the last complete write, the .CO tagpop command will fail. This check may be overridden by appending a .QT ! character to the command name. .SS .SP Line: Set to the line indicated by the tag. .SP Options: Affected by the .OP autowrite and .OP writeany options. .SE .KY tagprev .IP "tagp[rev][!]" Edit the file containing the previous context for the current tag. If the context is in a different file, then the new file is edited. If the current file has been modified since the last complete write, the .CO tagprev command will fail. This check can be overridden by appending the .QT ! character to the command name. .sp Capitalizing the first letter of the command, i.e. .CO Tagprev , while in .CO vi mode, will edit the file in a new screen. In this case, any modifications to the current file are ignored. .SS .SP Line: Set to the line indicated by the tag. .SP Options: Affected by the .OP autowrite and .OP writeany options. .SE .KY tagtop .IP "tagt[op][!]" Pop to the least recent tag on the tags stack, clearing the tags stack. .sp If the file has been modified since the last complete write, the .CO tagtop command will fail. This check may be overridden by appending a .QT ! character to the command name. .SS .SP Line: Set to the line indicated by the tag. .SP Options: Affected by the .OP autowrite and .OP writeany options. .SE .KY unabbrev .IP "una[bbrev] lhs" Delete an abbreviation. Delete .LI lhs from the current list of abbreviations. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY undo .IP "u[ndo]" Undo the last change made to the file. Changes made by .CO global , .CO v , .CO visual and map sequences are considered a single command. If repeated, the .CO u command alternates between these two states, and is its own inverse. .SS .SP Line: Set to the last line modified by the command. .SP Options: None. .SE .KY unmap .IP "unm[ap][!] lhs" Unmap a mapped string. Delete the command mode map definition for .LI lhs . If a .QT ! character is appended to the command name, delete the text input mode map definition instead. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY version .IP "ve[rsion]" Display the version of the .CO ex/vi editor. .KY visual .IP "[line] vi[sual] [type] [count] [flags]" .CO Ex mode only. Enter .CO vi . The .LI type is optional, and can be .QT \- , .QT + or .QT ^ , as in the .CO ex .CO z command, to specify the position of the specified line in the screen window. (The default is to place the line at the top of the screen window.) A .LI count specifies the number of lines that will initially be displayed. (The default is the value of the .OP window editor option.) .SS .SP Line: Unchanged unless .LI line is specified, in which case it is set to that line. .SP Options: None. .SE .KY visual .IP "vi[sual][!] [+cmd] [file]" .CO Vi mode only. Edit a new file. Identical to the .QT "edit[!] [+cmd] [file]" command. .sp Capitalizing the first letter of the command, i.e. .CO Visual , will edit the file in a new screen. In this case, any modifications to the current file are ignored. .KY viusage .IP "viu[sage] [command]" Display usage for a .CO vi command. If .LI command is specified, a usage statement for that command is displayed. Otherwise, usage statements for all .CO vi commands are displayed. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY write .IP "[range] w[rite][!] [>>] [file]" .Ip "[range] w[rite] [!] [file]" .KY wn .Ip "[range] wn[!] [>>] [file]" .KY wq .Ip "[range] wq[!] [>>] [file]" Write the file. The specified lines (the entire file, if no range is given) is written to .LI file . If .LI file is not specified, the current pathname is used. If .LI file is specified, and it exists, or if the current pathname was set using the .CO file command, and the file already exists, these commands will fail. Appending a .QT ! character to the command name will override this check and the write will be attempted, regardless. .sp Specifying the optional .QT >> string will cause the write to be appended to the file, in which case no tests are made for the file already existing. .sp If the file is preceded by a .QT ! character, the program named by the shell edit option is invoked with file as its second argument, and the specified lines are passed as standard input to that command. The .QT ! in this usage must be separated from command name by at least one whitespace character. The special meaning of the .QT ! may be overridden by escaping it with a backslash .PQ \e character. .sp The .CO wq version of the write command will exit the editor after writing the file, if there are no further files to edit. Appending a .QT ! character to the command name or entering two .QQ quit commands (i.e. .CO wq , .CO quit , .CO xit or .CO ZZ ) in a row) will override this check and the editor will exit, ignoring any files that have not yet been edited. .sp The .CO wn version of the write command will move to the next file after writing the file, unless the write fails. .SS .SP Line: Unchanged. .SP Options: Affected by the .OP readonly and .OP writeany options. .SE .KY xit .IP "[range] x[it][!] [file]" Write the file if it has been modified. The specified lines are written to .LI file , if the file has been modified since the last complete write to any file. If no .LI range is specified, the entire file is written. .sp The .CO xit command will exit the editor after writing the file, if there are no further files to edit. Appending a .QT ! character to the command name or entering two .QQ quit commands (i.e. .CO wq , .CO quit , .CO xit or .CO ZZ ) in a row) will override this check and the editor will exit, ignoring any files that have not yet been edited. .SS .SP Line: Unchanged. .SP Options: Affected by the .OP readonly and .OP writeany options. .SE .KY yank .IP "[range] ya[nk] [buffer] [count]" Copy the specified lines to a buffer. If no buffer is specified, the unnamed buffer is used. .SS .SP Line: Unchanged. .SP Options: None. .SE .KY z .IP "[line] z [type] [count] [flags]" Adjust the window. If no .LI type is specified, then .LI count lines following the specified line are displayed. The default .LI count is the value of the .OP window option. The .LI type argument changes the position at which .LI line is displayed on the screen by changing the number of lines displayed before and after .LI line . The following .LI type characters may be used: .SS .SP \- Place the line at the bottom of the screen. .SP + Place the line at the top of the screen. .SP \&. Place the line in the middle of the screen. .SP ^ Write out count lines starting .LI "count * 2" lines before .LI line ; the net effect of this is that a .QT z^ command following a .CO z command writes the previous page. .SP = Center .LI line on the screen with a line of hyphens displayed immediately before and after it. The number of preceding and following lines of text displayed are reduced to account for those lines. .SE .SS .SP Line: Set to the last line displayed, with the exception of the .Dq Li \&= .LI type , where the current line is set to the line specified by the command. .SP Options: Affected by the .OP scroll option. .SE vigor-0.016.orig/docs/USD.doc/vi.ref/ref.so0100644000076400007640000000312207103707242016725 0ustar cjw44cjw44.\" Copyright (c) 1994 .\" The Regents of the University of California. All rights reserved. .\" Copyright (c) 1994, 1995, 1996 .\" Keith Bostic. All rights reserved. .\" .\" See the LICENSE file for redistribution information. .\" .\" @(#)ref.so 8.9 (Berkeley) 8/17/96 .\" .\" .\" indented paragraph, with spaces between the items, bold font .de IP .\".tm arg 1 \\$1 arg 2 \\$2 arg 3 \\$3 .sp 1 .nr PS \\n(ps .nr ps 0 .ip "\fB\\$1\fP" \\$2 .nr ps \\n(PS .br .. .\" indented paragraph, no spaces between the items, bold font .de Ip .\".tm arg 1 \\$1 arg 2 \\$2 arg 3 \\$3 .nr PS \\n(ps .nr ps 0 .ns .ip "\fB\\$1\fP" \\$2 .nr ps \\n(PS .br .. .\" start nested .IP .de SS .sp .ba +5n .. .\" end nested .IP .de SE .ba -5n .. .\" nested .IP, no spaces, normal font .de SP .\".tm arg 1 \\$1 arg 2 \\$2 arg 3 \\$3 .nr PS \\n(ps .nr ps 0 .ns .ip "\\$1" 9n .nr ps \\n(PS .. .\" typewriter font .de LI \&\fC\\$1\fP\\$2 .. .\" ex/vi names in command font .de EV \&\fB\\$1\fP/\fB\\$2\fP\\$3 .. .\" command names .de CO \&\fB\\$1\fP\\$2 .. .\" key words for index .de KY .sy echo >>index '\\$1 \\n%' .. .\" option names .de OP \&\fB\\$1\fP\\$2 .. .\" paren quoted (typewriter font) .de PQ (\*(lq\fC\\$1\fP\*(rq)\\$2 .. .\" quoted bold .de QB \*(lq\fB\\$1\fP\*(rq\\$2 .. .\" quoted command .de QC \*(lq\fB\\$1\fP\*(rq\\$2 .. .\" quoted option .de QO \*(lq\fB\\$1\fP\*(rq\\$2 .. .\" quoted (no font change) .de QQ \*(lq\\$1\*(rq\\$2 .. .\" quoted (typewriter font) .de QT \*(lq\fC\\$1\fP\*(rq\\$2 .. .\" section macro to build TOC .de SH .(x \\$2 .)x .sh \\$1 "\\$2" .. .\" manual section .de XR \&\fI\\$1\fP(\\$2)\\$3 .. vigor-0.016.orig/docs/USD.doc/vi.ref/set.opt.roff0100644000076400007640000010064207103707242020065 0ustar cjw44cjw44.\" Copyright (c) 1994 .\" The Regents of the University of California. All rights reserved. .\" Copyright (c) 1994, 1995, 1996 .\" Keith Bostic. All rights reserved. .\" .\" See the LICENSE file for redistribution information. .\" .\" @(#)set.opt.roff 8.66 (Berkeley) 10/10/96 .\" .SH 1 "Set Options" .pp There are a large number of options that may be set (or unset) to change the editor's behavior. This section describes the options, their abbreviations and their default values. .pp In each entry below, the first part of the tag line is the full name of the option, followed by any equivalent abbreviations. (Regardless of the abbreviations, it is only necessary to use the minimum number of characters necessary to distinguish an abbreviation from all other commands for it to be accepted, in .EV nex nvi . Historically, only the full name and the official abbreviations were accepted by .EV ex vi . Using full names in your startup files and environmental variables will probably make them more portable.) The part in square brackets is the default value of the option. Most of the options are boolean, i.e. they are either on or off, and do not have an associated value. .pp Options apply to both .CO ex and .CO vi modes, unless otherwise specified. .pp With a few exceptions, all options are settable per screen, i.e. the .OP tags option can be set differently in each screen. The exceptions are the .OP columns , .OP lines , .OP secure and .OP term options. Changing these options modifies the respective information for all screens. .pp For information on modifying the options or to display the options and their current values, see the .QQ set command in the section entitled .QB "Ex Commands" . .KY altwerase .IP "altwerase [off]" .CO Vi only. Change how .CO vi does word erase during text input. When this option is set, text is broken up into three classes: alphabetic, numeric and underscore characters, other nonblank characters, and blank characters. Changing from one class to another marks the end of a word. In addition, the class of the first character erased is ignored (which is exactly what you want when erasing pathname components). .KY autoindent .IP "autoindent, ai [off]" If this option is set, whenever you create a new line (using the .CO vi .CO A , .CO a , .CO C , .CO c , .CO I , .CO i , .CO O , .CO o , .CO R , .CO r , .CO S , and .CO s commands, or the .CO ex .CO append , .CO change , and .CO insert commands) the new line is automatically indented to align the cursor with the first nonblank character of the line from which you created it. Lines are indented using tab characters to the extent possible (based on the value of the .OP tabstop option) and then using space characters as necessary. For commands inserting text into the middle of a line, any blank characters to the right of the cursor are discarded, and the first nonblank character to the right of the cursor is aligned as described above. .sp The indent characters are themselves somewhat special. If you do not enter more characters on the new line before moving to another line, or entering .LI , the indent character will be deleted and the line will be empty. For example, if you enter .LI twice in succession, the line created by the first .LI will not have any characters in it, regardless of the indentation of the previous or subsequent line. .sp Indent characters also require that you enter additional erase characters to delete them. For example, if you have an indented line, containing only blanks, the first .LI character you enter will erase up to end of the indent characters, and the second will erase back to the beginning of the line. (Historically, only the .LI key would erase the indent characters. Both the .LI key and the usual erase keys work in .CO nvi .) In addition, if the cursor is positioned at the end of the indent characters, the keys .QT 0 will erase all of the indent characters for the current line, resetting the indentation level to 0. Similarly, the keys .QT ^ will erase all of the indent characters for the current line, leaving the indentation level for future created lines unaffected. .sp Finally, if the .OP autoindent option is set, the .CO S and .CO cc commands change from the first nonblank of the line to the end of the line, instead of from the beginning of the line to the end of the line. .KY autoprint .IP "autoprint, ap [off]" .CO Ex only. Cause the current line to be automatically displayed after the .CO ex commands .CO < , .CO > , .CO copy , .CO delete , .CO join , .CO move , .CO put , .CO t , .CO Undo , and .CO undo . This automatic display is suppressed during .CO global and .CO v commands, and for any command where optional flags are used to explicitly display the line. .KY autowrite .IP "autowrite, aw [off]" If this option is set, the .CO vi .CO ! , .CO ^^ , .CO ^] and .CO commands, and the .CO ex .CO edit , .CO next , .CO rewind , .CO stop , .CO suspend , .CO tag , .CO tagpop , and .CO tagtop commands automatically write the current file back to the current file name if it has been modified since it was last written. If the write fails, the command fails and goes no further. .sp Appending the optional force flag character .QT ! to the .CO ex commands .CO next , .CO rewind , .CO stop , .CO suspend , .CO tag , .CO tagpop , and .CO tagtop stops the automatic write from being attempted. .sp (Historically, the .CO next command ignored the optional force flag.) Note, the .CO ex commands .CO edit , .CO quit , .CO shell , and .CO xit are .i not affected by the .OP autowrite option. .sp The .OP autowrite option is ignored if the file is considered read-only for any reason. .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms backup [QQ] .KY backup .IP "\*(ms" .tr QQ If this option is set, it specifies a pathname used as a backup file, and, whenever a file is written, the file's current contents are copied to it. The pathname is .QT \&# , .QT \&% and .QT \&! expanded. .sp If the first character of the pathname is .QT \&N , a version number is appended to the pathname (and the .QT \&N character is then discarded). Version numbers are always incremented, and each backup file will have a version number one greater than the highest version number currently found in the directory. .sp Backup files must be regular files, owned by the real user ID of the user running the editor, and not accessible by any other user. .KY beautify .IP "beautify, bf [off]" If this option is set, all control characters that are not currently being specially interpreted, other than .LI , .LI , and .LI , are discarded from commands read in by .CO ex from command files, and from input text entered to .CO vi (either into the file or to the colon command line). Text files read by .EV ex vi are .i not affected by the .OP beautify option. .KY cdpath .IP "cdpath [environment variable CDPATH, or current directory]" This option is used to specify a colon separated list of directories which are used as path prefixes for any relative path names used as arguments for the .CO cd command. The value of this option defaults to the value of the environmental variable .LI CDPATH if it is set, otherwise to the current directory. For compatibility with the POSIX 1003.2 shell, the .CO cd command does .i not check the current directory as a path prefix for relative path names unless it is explicitly specified. It may be so specified by entering an empty string or a .QT \&. character into the .LI CDPATH variable or the option value. .KY cedit .IP "cedit [no default]" This option adds the ability to edit the colon command-line history. This option is set to a string. Whenever the first character of that string is entered on the colon command line, you will enter a normal editing window on the collected commands that you've entered on the .CO vi colon command-line. You may then modify and/or execute the commands. All normal text editing is available, except that you cannot use .CO to switch to an alternate screen. Entering a .CO will execute the current line of the screen window as an ex command in the context of the screen from which you created the colon command-line screen, and you will then return to that screen. .sp Because of .CO vi \&'s parsing rules, it can be difficult to set the colon command-line edit character to the .LI character. To set it to .LI , use .QT "set cedit=" . .sp If the .OP cedit edit option is set to the same character as the .OP filec edit option, .CO vi will perform colon command-line editing if the character is entered as the first character of the line, otherwise, .CO vi will perform file name expansion. .KY columns .IP "columns, co [80]" The number of columns in the screen. Setting this option causes .EV ex vi to set (or reset) the environmental variable .LI COLUMNS . See the section entitled .QB "Sizing the Screen" more information. .KY comment .IP "comment [off]" .CO Vi only. If the first non-empty line of the file begins with the string .QT # , .QT /\&* or .QT // , this option causes .CO vi to skip to the end of that shell, C or C++ comment (probably a terribly boring legal notice) before displaying the file. .KY directory .IP "directory, dir [environment variable TMPDIR, or /tmp]" The directory where temporary files are created. The environmental variable .LI TMPDIR is used as the default value if it exists, otherwise .LI /tmp is used. .KY edcompatible .IP "edcompatible, ed [off]" Remember the values of the .QQ c and .QQ g suffixes to the .CO substitute commands, instead of initializing them as unset for each new command. Specifying pattern and replacement strings to the .CO substitute command unsets the .QQ c and .QQ g suffixes as well. .KY escapetime .IP "escapetime [1]" The 10th's of a second .EV ex vi waits for a subsequent key to complete an .LI key mapping. .KY errorbells .IP "errorbells, eb [off]" .CO Ex only. .CO Ex error messages are normally presented in inverse video. If that is not possible for the terminal, setting this option causes error messages to be announced by ringing the terminal bell. .KY exrc .IP "exrc, ex [off]" If this option is turned on in the EXINIT environment variables, or the system or $HOME startup files, the local startup files are read, unless they are the same as the system or $HOME startup files or fail to pass the standard permission checks. See the section entitled .QB "Startup Information" for more information. .KY extended .IP "extended [off]" This option causes all regular expressions to be treated as POSIX 1003.2 Extended Regular Expressions (which are similar to historic .XR egrep 1 style expressions). .KY filec .IP "filec [no default]" This option adds the ability to do shell expansion when entering input on the colon command line. This option is set to a string. Whenever the first character of that string is entered on the colon command line, the delimited string immediately before the cursor is expanded as if it were followed by a .LI \&* character, and file name expansion for the .CO ex edit command was done. If no match is found, the screen is flashed and text input resumed. If a single match results, that match replaces the expanded text. In addition, if the single match is for a directory, a .LI \&/ character is appended and file completion is repeated. If more than a single match results, any unique prefix shared by the matches replaces the expanded text, the matches are displayed, and text input resumed. .sp Because of .CO vi \&'s parsing rules, it can be difficult to set the path completion character to two command values, .LI and .LI . To set it to .LI , use .QT "set filec=" . To set it to .LI , use .QT "set filec=\e" . .sp If the .OP cedit edit option is set to the same character as the .OP filec edit option, .CO vi will perform colon command-line editing if the character is entered as the first character of the line, otherwise, .CO vi will perform file name expansion. .KY flash .IP "flash [on]" This option causes the screen to flash instead of beeping the keyboard, on error, if the terminal has the capability. .KY hardtabs .IP "hardtabs, ht [8]" This option defines the spacing between hardware tab settings, i.e. the tab expansion done by the operating system and/or the terminal itself. As .EV nex nvi never writes .LI characters to the terminal, unlike historic versions of .EV ex vi , this option does not currently have any affect. .KY iclower .IP "iclower [off]" The .OP iclower edit option makes all Regular Expressions case-insensitive, as long as an upper-case letter does not appear in the search string. .KY ignorecase .IP "ignorecase, ic [off]" This option causes regular expressions, both in .CO ex commands and in searches, to be evaluated in a case-insensitive manner. .KY keytime .IP "keytime [6]" The 10th's of a second .EV ex vi waits for a subsequent key to complete a key mapping. .KY leftright .IP "leftright [off]" .CO Vi only. This option causes the screen to be scrolled left-right to view lines longer than the screen, instead of the traditional .CO vi screen interface which folds long lines at the right-hand margin of the terminal. .KY lines .IP "lines, li [24]" .CO Vi only. The number of lines in the screen. Setting this option causes .EV ex vi to set (or reset) the environmental variable .LI LINES . See the section entitled .QB "Sizing the Screen" for more information. .KY lisp .IP "lisp [off]" .CO Vi only. This option changes the behavior of the .CO vi .CO ( , .CO ) , .CO { , .CO } , .CO [[ and .CO ]] commands to match the Lisp language. Also, the .OP autoindent option's behavior is changed to be appropriate for Lisp. .sp .i "This option is not yet implemented." .KY list .IP "list [off]" This option causes lines to be displayed in an unambiguous fashion. Specifically, tabs are displayed as control characters, i.e. .QT ^I , and the ends of lines are marked with a .QT $ character. .KY lock .IP "lock [on]" This option causes the editor to attempt to get an exclusive lock on any file being edited, read or written. Reading or writing a file that cannot be locked produces a warning message, but no other effect. Editing a file that cannot be locked results in a read only edit session, as if the .OP readonly edit option were set. .KY magic .IP "magic [on]" This option is on by default. Turning the .OP magic option off causes all regular expression characters except for .QT ^ and .QT $ , to be treated as ordinary characters. To re-enable characters individually, when the .OP magic option is off, precede them with a backslash .QT \e character. See the section entitled .QB "Regular Expressions and Replacement Strings" for more information. .KY matchtime .IP "matchtime [7]" .CO Vi only. The 10th's of a second .CO vi pauses on the matching character when the .OP showmatch option is set. .KY mesg .IP "mesg [on]" This option allows other users to contact you using the .XR talk 1 and .XR write 1 utilities, while you are editing. .EV Ex vi does not turn message on, i.e. if messages were turned off when the editor was invoked, they will stay turned off. This option only permits you to disallow messages for the edit session. See the .XR mesg 1 utility for more information. .KY msgcat .IP "msgcat [./]" This option selects a message catalog to be used to display error and informational messages in a specified language. If the value of this option ends with a '/', it is treated as the name of a directory that contains a message catalog .QT "vi_XXXX" , where .QT XXXX is the value of the .LI LANG environmental variable, if it's set, or the value of the .LI LC_MESSAGES environmental variable if it's not. If neither of those environmental variables are set, or if the option doesn't end in a '/', the option is treated as the full path name of the message catalog to use. .sp If any messages are missing from the catalog, the backup text (English) is used instead. .sp See the distribution file .LI catalog/README for additional information on building and installing message catalogs. .KY modelines .IP "modelines, modeline [off]" If the .OP modelines option is set, .EV ex vi has historically scanned the first and last five lines of each file as it is read for editing, looking for any .CO ex commands that have been placed in those lines. After the startup information has been processed, and before the user starts editing the file, any commands embedded in the file are executed. .sp Commands were recognized by the letters .QQ e or .QQ v followed by .QQ x or .QQ i , at the beginning of a line or following a tab or space character, and followed by a .QQ : , an .CO ex command, and another .QQ : . .sp This option is a security problem of immense proportions, and should not be used under any circumstances. .sp .i "This option will never be implemented." .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms noprint [QQ] .KY noprint .IP "\*(ms" .tr QQ Characters that are never handled as printable characters. By default, the C library function .XR isprint 3 is used to determine if a character is printable or not. This edit option overrides that decision. .KY number .IP "number, nu [off]" Precede each line displayed with its current line number. .KY octal .IP "octal [off]" Display unknown characters as octal numbers .PQ "\e###" , instead of the default hexadecimal .PQ "\ex##" . .KY open .IP "open [on]" .CO Ex only. If this option is not set, the .CO open and .CO visual commands are disallowed. .KY optimize .IP "optimize, opt [on]" .CO Vi only. Throughput of text is expedited by setting the terminal not to do automatic carriage returns when printing more than one (logical) line of output, greatly speeding output on terminals without addressable cursors when text with leading white space is printed. .sp .i "This option is not yet implemented." .KY paragraphs .IP "paragraphs, para [IPLPPPQPP LIpplpipbp]" .CO Vi only. Define additional paragraph boundaries for the .CO { and .CO } commands. The value of this option must be a character string consisting of zero or more character pairs. .sp In the text to be edited, the character string .LI "." , (where .LI is one of the character pairs in the option's value) defines a paragraph boundary. For example, if the option were set to .LI "LaA##" , then all of the following additional paragraph boundaries would be recognized: .sp .(l .La .A .## .)l .KY path .IP "path []" The path option can be used to specify a -separated list of paths, similar to the .LI PATH environment variable in the shells. If this option is set, the name of the file to be edited is not an absolute pathname, the first component of the filename is not .QT \&. or .QT \&.. , and the file to be edited doesn't exist in the current directory, the elements of the .OP path option are sequentially searched for a file of the specified name. If such a file is found, it is edited. .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms print [QQ] .KY print .IP "\*(ms" .tr QQ Characters that are always handled as printable characters. By default, the C library function .XR isprint 3 is used to determine if a character is printable or not. This edit option overrides that decision. .KY prompt .IP "prompt [on]" .CO Ex only. This option causes .CO ex to prompt for command input with a .QT : character; when it is not set, no prompt is displayed. .KY readonly .IP "readonly, ro [off]" This option causes a force flag to be required to attempt to write the file. Setting this option is equivalent to using the .b \-R command line option, or executing the .CO vi program using the name .CO view . .sp The .OP readonly edit option is not usually persistent, like other edit options. If the .b \-R command line option is set, .CO vi is executed as .CO view , or the .OP readonly edit option is explicitly set, all files edited in the screen will be marked readonly, and the force flag will be required to write them. However, if none of these conditions are true, or the .OP readonly edit option is explicitly unset, then the .OP readonly edit option will toggle based on the write permissions of the file currently being edited as of when it is loaded into the edit buffer. In other words, the .OP readonly edit option will be set if the current file lacks write permissions, and will not be set if the user has write permissions for the file. .KY recdir .IP "recdir [/var/tmp/vi.recover]" The directory where recovery files are stored. .sp If you change the value of .OP recdir , be careful to choose a directory whose contents are not regularly deleted. Bad choices include directories in memory based filesystems, or .LI /tmp , on most systems, as their contents are removed when the machine is rebooted. .sp Public directories like .LI /usr/tmp and .LI /var/tmp are usually safe, although some sites periodically prune old files from them. There is no requirement that you use a public directory, e.g. a sub-directory of your home directory will work fine. .sp Finally, if you change the value of .OP recdir , you must modify the recovery script to operate in your chosen recovery area. .sp See the section entitled .QB "Recovery" for further information. .KY redraw .IP "redraw, re [off]" .CO Vi only. The editor simulates (using great amounts of output), an intelligent terminal on a dumb terminal (e.g. during insertions in .CO vi the characters to the right of the cursor are refreshed as each input character is typed). .sp .i "This option is not yet implemented." .KY remap .IP "remap [on]" If this option is set, it is possible to define macros in terms of other macros. Otherwise, each key is only remapped up to one time. For example, if .QT A is mapped to .QT B , and .QT B is mapped to .QT C , The keystroke .QT A will be mapped to .QT C if the .OP remap option is set, and to .QT B if it is not set. .KY report .IP "report [5]" Set the threshold of the number of lines that need to be changed or yanked before a message will be displayed to the user. For everything but the yank command, the value is the largest value about which the editor is silent, i.e. by default, 6 lines must be deleted before the user is notified. However, if the number of lines yanked is greater than .i "or equal to" the set value, it is reported to the user. .KY ruler .IP "ruler [off]" .CO Vi only. Display a row/column ruler on the colon command line. .KY scroll .IP "scroll, scr [(environment variable LINES - 1) / 2]" Set the number of lines scrolled by the .CO ex .CO and .CO commands. .sp Historically, the .CO ex .CO z command, when specified without a count, used two times the size of the scroll value; the POSIX 1003.2 standard specified the window size, which is a better choice. .KY searchincr .IP "searchincr [off]" The .OP searchincr edit option makes the search commands .CO \&/ and .CO \&? incremental, i.e. the screen is updated and the cursor moves to the matching text as the search pattern is entered. If the search pattern is not found, the screen is beeped and the cursor remains on the colon-command line. Erasing characters from the search pattern backs the cursor up to the previous matching text. .KY sections .IP "sections, sect [NHSHH HUnhsh]" .CO Vi only. Define additional section boundaries for the .CO [[ and .CO ]] commands. The .OP sections option should be set to a character string consisting of zero or more character pairs. In the text to be edited, the character string .LI "." , (where .LI is one of the character pairs in the option's value), defines a section boundary in the same manner that .OP paragraphs option boundaries are defined. .KY secure .IP "secure [off]" The .OP secure edit option turns off all access to external programs. This means that the versions of the .CO read and .CO write commands that filter text through other programs, the .CO vi .CO \&! and .CO commands, the .CO ex .CO \&! , .CO script , .CO shell , .CO stop and .CO suspend commands and file name expansion will not be permitted. Once set, the .OP secure edit option may not be unset. .KY shell .IP "shell, sh [environment variable SHELL, or /bin/sh]" Select the shell used by the editor. The specified path is the pathname of the shell invoked by the .CO vi .CO ! shell escape command and by the .CO ex .CO shell command. This program is also used to resolve any shell meta-characters in .CO ex commands. .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms shellmeta [~{[*?$`'Q\e] .KY shellmeta .IP "\*(ms" .tr QQ The set of characters that .CO ex checks for when doing file name expansion. If any of the specified characters are found in the file name arguments to the .CO ex commands, the arguments are expanded using the program defined by the .OP shell option. The default set of characters is a union of meta characters from the Version 7 and the Berkeley C shell. .KY shiftwidth .IP "shiftwidth, sw [8]" Set the autoindent and shift command indentation width. This width is used by the .OP autoindent option and by the .CO < , .CO > , and .CO shift commands. .KY showmatch .IP "showmatch, sm [off]" .CO Vi only. This option causes .CO vi , when a .QT } or .QT ) is entered, to briefly move the cursor the matching .QT { or .QT ( . See the .OP matchtime option for more information. .KY showmode .IP "showmode, smd [off]" .CO Vi only. This option causes .CO vi to display a string identifying the current editor mode on the colon command line. The string is preceded by an asterisk (``*'') if the file has been modified since it was last completely written, .KY sidescroll .IP "sidescroll [16]" .CO Vi only. Sets the number of columns that are shifted to the left or right, when .CO vi is doing left-right scrolling and the left or right margin is crossed. See the .OP leftright option for more information. .KY slowopen .IP "slowopen, slow [off]" This option affects the display algorithm used by .CO vi , holding off display updating during input of new text to improve throughput when the terminal in use is slow and unintelligent. .sp .i "This option is not yet implemented." .KY sourceany .IP "sourceany [off]" If this option is turned on, .CO vi historically read startup files that were owned by someone other than the editor user. See the section entitled .QB "Startup Information" for more information. This option is a security problem of immense proportions, and should not be used under any circumstances. .sp .i "This option will never be implemented." .KY tabstop .IP "tabstop, ts [8]" This option sets tab widths for the editor display. .KY taglength .IP "taglength, tl [0]" This option sets the maximum number of characters that are considered significant in a tag name. Setting the value to 0 makes all of the characters in the tag name significant. .KY tags .IP "tags, tag [tags /var/db/libc.tags /sys/kern/tags]" Sets the list of tags files, in search order, which are used when the editor searches for a tag. .KY term .IP "term, ttytype, tty [environment variable TERM]" Set the terminal type. Setting this option causes .EV ex vi to set (or reset) the environmental variable .LI TERM . .KY terse .IP "terse [off]" This option has historically made editor messages less verbose. It has no effect in this implementation. See the .OP verbose option for more information. .KY tildeop .IP "tildeop [off]" Modify the .CO ~ command to take an associated motion. .KY timeout .IP "timeout, to [on]" If this option is set, .EV ex vi waits for a specific period for a subsequent key to complete a key mapping (see the .OP keytime option). If the option is not set, the editor waits until enough keys are entered to resolve the ambiguity, regardless of how long it takes. .KY ttywerase .IP "ttywerase [off]" .CO Vi only. This option changes how .CO vi does word erase during text input. If this option is set, text is broken up into two classes, blank characters and nonblank characters. Changing from one class to another marks the end of a word. .KY verbose .IP "verbose [off]" .CO Vi only. .CO Vi historically bells the terminal for many obvious mistakes, e.g. trying to move past the left-hand margin, or past the end of the file. If this option is set, an error message is displayed for all errors. .KY w300 .IP "w300 [no default]" .CO Vi only. Set the window size if the baud rate is less than 1200 baud. See the .OP window option for more information. .KY w1200 .IP "w1200 [no default]" .CO Vi only. Set the window size if the baud rate is equal to 1200 baud. See the .OP window option for more information. .KY w9600 .IP "w9600 [no default]" .CO Vi only. Set the window size if the baud rate is greater than 1200 baud. See the .OP window option for more information. .KY warn .IP "warn [on]" .CO Ex only. This option causes a warning message to the terminal if the file has been modified, since it was last written, before a .CO ! command. .KY window .IP "window, w, wi [environment variable LINES - 1]" This option determines the default number of lines in a screenful, as displayed by the .CO z command. It also determines the number of lines scrolled by the .CO vi commands .CO and .CO , and the default number of lines scrolled by the .CO vi commands .CO and .CO . The value of window can be unrelated to the real screen size, although it starts out as the number of lines on the screen. See the section entitled .QB "Sizing the Screen" for more information. Setting the value of the .OP window option is the same as using the .b \-w command line option. .sp If the value of the .OP window option (as set by the .OP window , .OP w300 , .OP w1200 or .OP w9600 options) is smaller than the actual size of the screen, large screen movements will result in displaying only that smaller number of lines on the screen. (Further movements in that same area will result in the screen being filled.) This can provide a performance improvement when viewing different places in one or more files over a slow link. .sp Resetting the window size does not reset the default number of lines scrolled by the .CO and .CO commands. .KY windowname .IP "windowname [off]" .CO Vi changes the name of the editor's icon/window to the current file name when it's possible and not destructive, i.e., when the editor can restore it to its original value on exit or when the icon/window will be discarded as the editor exits. If the .OP windowname edit option is set, .CO vi will change the icon/window name even when it's destructive and the icon/window name will remain after the editor exits. (This is the case for .XR xterm 1 ). .KY wraplen .IP "wraplen, wl [0]" This option is identical to the .OP wrapmargin option, with the exception that it specifies the number of columns from the .i left margin before the line splits, not the right margin. .sp If both .OP wraplen and .OP wrapmargin are set, the .OP wrapmargin value is used. .KY wrapmargin .IP "wrapmargin, wm [0]" .CO Vi only. If the value of the .OP wrapmargin option is non-zero, .CO vi will split lines so that they end at least that number of columns before the right-hand margin of the screen. (Note, the value of .OP wrapmargin is .i not a text length. In a screen that is 80 columns wide, the command .QT ":set wrapmargin=8" attempts to keep the lines less than or equal to 72 columns wide.) .sp Lines are split at the previous whitespace character closest to the number. Any trailing whitespace characters before that character are deleted. If the line is split because of an inserted .LI or .LI character, and you then enter another .LI character, it is discarded. .sp If wrapmargin is set to 0, or if there is no blank character upon which to split the line, the line is not broken. .sp If both .OP wraplen and .OP wrapmargin are set, the .OP wrapmargin value is used. .KY wrapscan .IP "wrapscan, ws [on]" This option causes searches to wrap around the end or the beginning of the file, and back to the starting point. Otherwise, the end or beginning of the file terminates the search. .KY writeany .IP "writeany, wa [off]" If this option is set, file-overwriting checks that would usually be made before the .CO write and .CO xit commands, or before an automatic write (see the .OP autowrite option), are not made. This allows a write to any file, provided the file permissions allow it. vigor-0.016.orig/docs/USD.doc/vi.ref/spell.ok0100644000076400007640000000531607103707242017267 0ustar cjw44cjw44ABC Amir Autoindent Autoprint BRE's Bostic Bourne CDPATH CSCOPE Cscope DIRS DOUBLEQUOTE Dq Ds ERE's EXINIT Englar Ev FF Fa Fg FindScreen Fl Foregrounding HUnhsh IPLPPPQPP Kirkendall Korn LC LIpplpipbp LaA Li Lowercase MINUSSIGN Makefiles Mayoff NEX NEXINIT NHSHH NVI Neville Nex Nvi OS POSIX Perl PostScript QQ RE's README RECDIR Reference''USD:13 SENDMAIL SIGHUP SIGWINCH SQUOTE Se Std Std1003.2 Sven Sy TANDARDS TIOCGWINSZ TMPDIR TOC Tagnext Tagprev Tcl Tk Todo USD USD.doc USD:13 UUNET Unmap VI Verdoolaege Vi Vx Whitespace XOFF XON XOptions XXCOLUMNS XXXX XXXXXX XXb ZZ ab abbrev abc ags ai al altwerase ap api ar arg args att autoindent autoprint autowrite aw backgrounded backgrounding bbrev berkeley bf bg bigword bigwords bostic bp brev bsd bugs.current c2w carat cd cdpath cdy cedit changelog chd chdir cmd co count1 count2 creens cs cs.berkeley.edu cscope ctags cw db dbopen dd def di dir dit docs eE eFlRsv eFlRv eL eU ead eb edcompatible edu ee egrep elete elp elvis email enum eof errorbells esc escapetime eset eu ex.cmd.roff exrc ext exu exusage fcntl fg fi filec filesystem filesystems foo foregrounded foregrounding ftp.cs.berkeley.edu ftp.uu.net gdb gdb.script getpwent gs gzip'd halfbyte hange hangup hardtabs ht html http ic iclower ifdef ignorecase ile ind initially ious ir iscntrl isprint ist ize keystroke keystrokes keytime leftright lhs li lib libc libc.tags lineNum lineNumber lobal lowercase lp luR matchtime mber mesg meta mk mkexrc modeful modeline modelines ms msgcat ndo nex nexrc nk nomagic nonblank nonoverlapping nooption noprint nsert nul nvi nvi.tar.Z nvi.tar.z nz oin onnections op ove para pathname pathnames pe perl perld ppend prev pu py rc rc.local readonly rec recdir recfile recover.XXXX recover.XXXXXX recover.c recover.script redist redistributable reimplementations remapmax remapped repl res rew rhs rint ript rk rl ro roff rsion sc sccs scr screeen screenId se searchincr sendmail set.opt.roff settable setuid sh shareware shellmeta shiftwidth showmatch showmode sidescroll slowopen sm smd sourceany sp spell.ok ssg st su sual svi sw ta tabstop taglength tagn tagnext tagp tagpop tagprev tagstring tagt tagtop tc tcl tclproc terminfo th th's tildeop tl tmp toolchest tpath tr ts ttytype ttywerase uR ubstitute ucb uffers uit una unabbrev unescaped unm unmap unsets uppercase urce usr uunet v var ve vi vi.0.ps vi.0.txt vi.1 vi.XXXX vi.XXXXXX vi.cmd.roff vi.exrc vi.recover viAppendLine viDelLine viEndScreen viFindScreen viGetCursor viGetLine viGetMark viGetOpt viInsertLine viLastLine viMapKey viMsg viNewScreen viSetCursor viSetLine viSetMark viSetOpt viSwitchScreen viUnmMapKey vibackup virecovery viu viusage wa whitespace wi windowname wl wm wn wq wraplen wrapmargin wrapscan writeany ws www xaw xit xterm ya yy vigor-0.016.orig/docs/USD.doc/vi.ref/vi.cmd.roff0100644000076400007640000021140707103707243017654 0ustar cjw44cjw44.\" Copyright (c) 1994 .\" The Regents of the University of California. All rights reserved. .\" Copyright (c) 1994, 1995, 1996 .\" Keith Bostic. All rights reserved. .\" .\" See the LICENSE file for redistribution information. .\" .\" @(#)vi.cmd.roff 8.49 (Berkeley) 8/17/96 .\" .SH 1 "Vi Description" .pp .CO Vi takes up the entire screen to display the edited file, except for the bottom line of the screen. The bottom line of the screen is used to enter .CO ex commands, and for .CO vi error and informational messages. If no other information is being displayed, the default display can show the current cursor row and cursor column, an indication of whether the file has been modified, and the current mode of the editor. See the .OP ruler and .OP showmode options for more information. .pp Empty lines do not have any special representation on the screen, but lines on the screen that would logically come after the end of the file are displayed as a single tilde .PQ ~ character. To differentiate between empty lines and lines consisting of only whitespace characters, use the .OP list option. Historically, implementations of .CO vi have also displayed some lines as single asterisk .PQ @ characters. These were lines that were not correctly displayed, i.e. lines on the screen that did not correspond to lines in the file, or lines that did not fit on the current screen. .CO Nvi never displays lines in this fashion. .pp .CO Vi is a modeful editor, i.e. it has two modes, .QQ command mode and .QQ "text input" mode. When .CO vi first starts, it is in command mode. There are several commands that change .CO vi into text input mode. The .LI character is used to resolve the text input into the file, and exit back into command mode. In .CO vi command mode, the cursor is always positioned on the last column of characters which take up more than one column on the screen. In .CO vi text insert mode, the cursor is positioned on the first column of characters which take up more than one column on the screen. .pp When positioning the cursor to a new line and column, the type of movement is defined by the distance to the new cursor position. If the new position is close, the screen is scrolled to the new location. If the new position is far away, the screen is repainted so that the new position is on the screen. If the screen is scrolled, it is moved a minimal amount, and the cursor line will usually appear at the top or bottom of the screen. If the screen is repainted, the cursor line will appear in the center of the screen, unless the cursor is sufficiently close to the beginning or end of the file that this isn't possible. If the .OP leftright option is set, the screen may be scrolled or repainted in a horizontal direction as well as in a vertical one. .pp A major difference between the historical .CO vi presentation and .CO nvi is in the scrolling and screen oriented position commands, .CO , .CO , .CO , .CO , .CO , .CO , .CO H , .CO L and .CO M . In historical implementations of .CO vi , these commands acted on physical (as opposed to logical, or screen) lines. For lines that were sufficiently long in relation to the size of the screen, this meant that single line scroll commands might repaint the entire screen, scrolling or screen positioning commands might not change the screen or move the cursor at all, and some lines simply could not be displayed, even though .CO vi would edit the file that contained them. In .CO nvi , these commands act on logical, i.e. screen lines. You are unlikely to notice any difference unless you are editing files with lines significantly longer than a screen width. .pp .CO Vi keeps track of the currently .QQ "most attractive" cursor position. Each command description (for commands that alter the current cursor position), specifies if the cursor is set to a specific location in the line, or if it is moved to the .QQ "most attractive cursor position" . The latter means that the cursor is moved to the cursor position that is horizontally as close as possible to the current cursor position. If the current line is shorter than the cursor position .CO vi would select, the cursor is positioned on the last character in the line. (If the line is empty, the cursor is positioned on the first column of the line.) If a command moves the cursor to the most attractive position, it does not alter the current cursor position, and a subsequent movement will again attempt to move the cursor to that position. Therefore, although a movement to a line shorter than the currently most attractive position will cause the cursor to move to the end of that line, a subsequent movement to a longer line will cause the cursor to move back to the most attractive position. .pp In addition, the .CO $ command makes the end of each line the most attractive cursor position rather than a specific column. .pp Each .CO vi command described below notes where the cursor ends up after it is executed. This position is described in terms of characters on the line, i.e. .QQ "the previous character" , or, .QQ "the last character in the line" . This is to avoid needing to continually refer to on what part of the character the cursor rests. .pp The following words have special meaning for .CO vi commands. .KY "previous context" .IP "previous context" The position of the cursor before the command which caused the last absolute movement was executed. Each .CO vi command described in the next section that is considered an absolute movement is so noted. In addition, specifying .i any address to an .CO ex command is considered an absolute movement. .KY "motion" .IP "motion" A second .CO vi command can be used as an optional trailing argument to the .CO vi .CO \&< , .CO \&> , .CO \&! , .CO \&c , .CO \&d , .CO \&y , and (depending on the .OP tildeop option) .CO \&~ commands. This command indicates the end of the region of text that's affected by the command. The motion command may be either the command character repeated (in which case it means the current line) or a cursor movement command. In the latter case, the region affected by the command is from the starting or stopping cursor position which comes first in the file, to immediately before the starting or stopping cursor position which comes later in the file. Commands that operate on lines instead of using beginning and ending cursor positions operate on all of the lines that are wholly or partially in the region. In addition, some other commands become line oriented depending on where in the text they are used. The command descriptions below note these special cases. .sp The following commands may all be used as motion components for .CO vi commands: .sp .ne 12v .ft C .TS r r r r. $ % ' ( ) + , - / 0 ; ? B E F G H L M N T W [[ ]] ^ \&_ ` b e f h j k l n t w { | } .TE .ft R .sp The optional count prefix available for some of the .CO vi commands that take motion commands, or the count prefix available for the .CO vi commands that are used as motion components, may be included and is .i always considered part of the motion argument. For example, the commands .QT c2w and .QT 2cw are equivalent, and the region affected by the .CO c command is two words of text. In addition, if the optional count prefix is specified for both the .CO vi command and its motion component, the effect is multiplicative and is considered part of the motion argument. For example, the commands .QT 4cw and .QT 2c2w are equivalent, and the region affected by the .CO c command is four words of text. .KY "count" .IP "count" A positive number used as an optional argument to most commands, either to give a size or a position (for display or movement commands), or as a repeat count (for commands that modify text). The count argument is always optional and defaults to 1 unless otherwise noted in the command description. .sp When a .CO vi command synopsis shows both a .LI [buffer] and .LI [count] , they may be presented in any order. .KY word .IP word Generally, in languages where it is applicable, .CO vi recognizes two kinds of words. First, a sequence of letters, digits and underscores, delimited at both ends by: characters other than letters, digits, or underscores, the beginning or end of a line, and the beginning or end of the file. Second, a sequence of characters other than letters, digits, underscores, or whitespace characters, delimited at both ends by: a letter, digit, underscore, or whitespace character, the beginning or end of a line, and the beginning or end of the file. For example, the characters .QT " !@#abc$%^ " contain three words: .QT "!@#" , .QT "abc" and .QT "$%^" . .sp Groups of empty lines (or lines containing only whitespace characters) are treated as a single word. .KY "bigword" .IP "bigword" A set of non-whitespace characters preceded and followed by whitespace characters or the beginning or end of the file or line. For example, the characters .QT " !@#abc$%^ " contain one bigword: .QT "!@#abc$%^" . .sp Groups of empty lines (or lines containing only whitespace characters) are treated as a single bigword. .KY "paragraph" .IP "paragraph" An area of text that begins with either the beginning of a file, an empty line, or a section boundary, and continues until either an empty line, section boundary, or the end of the file. .sp Groups of empty lines (or lines containing only whitespace characters) are treated as a single paragraph. .sp Additional paragraph boundaries can be defined using the .OP paragraphs option. .KY "section" .IP "section" An area of text that starts with the beginning of the file or a line whose first character is an open brace .PQ { and continues until the next section or the end of the file. .sp Additional section boundaries can be defined using the .OP sections option. .KY "sentence" .IP "sentence" An area of text that begins with either the beginning of the file or the first nonblank character following the previous sentence, paragraph, or section boundary and continues until the end of the file or a period .PQ \&. exclamation point .PQ ! or question mark .PQ ? character, followed by either an end-of-line or two whitespace characters. Any number of closing parentheses .PQ ) , brackets .PQ ] , double-quote .PQ """" or single quote .PQ ' characters can appear between the period, exclamation point, or question mark and the whitespace characters or end-of-line. .sp Groups of empty lines (or lines containing only whitespace characters) are treated as a single sentence. .SH 1 "Vi Commands" .pp The following section describes the commands available in the command mode of the .CO vi editor. In each entry below, the tag line is a usage synopsis for the command character. In addition, the final line and column the cursor rests upon, and any options which affect the command are noted. .KY .IP "[count] " Search forward .LI count times for the current word. The current word begins at the first non-whitespace character on or after the current cursor position, and extends up to the next non-word character or the end of the line. The search is literal, i.e. no characters in the word have any special meaning in terms of Regular Expressions. It is an error if no matching pattern is found between the starting position and the end of the file. .sp The .CO command is an absolute movement. The .CO command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Set to the line where the word is found. .SP Column: Set to the first character of the word. .SP Options: Affected by the .OP ignorecase and .OP wrapscan options. .SE .KY .IP "[count] " Page backward .LI count screens. Two lines of overlap are maintained, if possible, by displaying the window starting at line .LI "(top_line - count * window_size) + 2" , where .LI window_size is the value of the .OP window option. (In the case of split screens, this size is corrected to the current screen size.) It is an error if the movement is past the beginning of the file. .SS .SP Line: Set to the last line of text displayed on the screen. .SP Column: Set to the first nonblank character of the line. .SP Options: Affected by the .OP window option. .SE .KY .IP "[count] " Scroll forward .LI count lines. If .LI count is not specified, scroll forward the number of lines specified by the last .CO or .CO command. If this is the first .CO or .CO command, scroll forward half the number of lines in the screen. (In the case of split screens, the default scrolling distance is corrected to half the current screen size.) It is an error if the movement is past the end of the file. .SS .SP Line: Set to the current line plus the number of lines scrolled. .SP Column: Set to the first nonblank character of the line. .SP Options: None. .SE .KY .IP "[count] " Scroll forward .LI count lines, leaving the cursor on the current line and column, if possible. It is an error if the movement is past the end of the file. .SS .SP Line: Unchanged unless the current line scrolls off the screen, in which case it is set to the first line on the screen. .SP Column: Unchanged unless the current line scrolls off the screen, in which case it is set to the most attractive cursor position. .SP Options: None. .SE .KY .IP "[count] " Page forward .LI count screens. Two lines of overlap are maintained, if possible, by displaying the window starting at line .LI "top_line + count * window_size - 2" , where .LI window_size is the value of the .OP window option. (In the case of split screens, this size is corrected to the current screen size.) It is an error if the movement is past the end of the file. .SS .SP Line: Set to the first line on the screen. .SP Column: Set to the first nonblank character of the current line. .SP Options: Affected by the .OP window option. .SE .KY .IP "" Display the file information. The information includes the current pathname, the current line, the number of total lines in the file, the current line as a percentage of the total lines in the file, if the file has been modified, was able to be locked, if the file's name has been changed, and if the edit session is read-only. .SS .SP Line: Unchanged. .SP Column: Unchanged. .SP Options: None. .SE .KY .IP "[count] " .Ip "[count] h" Move the cursor back .LI count characters in the current line. It is an error if the cursor is on the first character in the line. .sp The .CO and .CO h commands may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the .LI "current - count" character, or, the first character in the line if .LI count is greater than or equal to the number of characters in the line before the cursor. .SP Options: None. .SE .KY .IP "[count] " .KY .Ip "[count] " .KY j .Ip "[count] j" Move the cursor down .LI count lines without changing the current column. It is an error if the movement is past the end of the file. .sp The .CO , .CO and .CO j commands may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .SS .SP Line: Set to the current line plus .LI count . .SP Column: The most attractive cursor position. .SP Options: None. .SE .KY .IP "" .KY .Ip "" Repaint the screen. .SS .SP Line: Unchanged. .SP Column: Unchanged. .SP Options: None. .SE .KY .IP "[count] " .KY + .Ip "[count] +" Move the cursor down .LI count lines to the first nonblank character of that line. It is an error if the movement is past the end of the file. .sp The .CO and .CO + commands may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .SS .SP Line: Set to the current line plus .LI count . .SP Column: Set to the first nonblank character in the line. .SP Options: None. .SE .KY .IP "[count] " .KY k .Ip "[count] k" Move the cursor up .LI count lines, without changing the current column. It is an error if the movement is past the beginning of the file. .sp The .CO and .CO k commands may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .SS .SP Line: Set to the current line minus .LI count . .SP Column: The most attractive cursor position. .SP Options: None. .SE .KY .IP "" Return to the most recent tag context. The .CO command is an absolute movement. .SS .SP Line: Set to the context of the previous tag command. .SP Column: Set to the context of the previous tag command. .SP Options: None. .SE .KY .IP "[count] " Scroll backward .LI count lines. If .LI count is not specified, scroll backward the number of lines specified by the last .CO or .CO command. If this is the first .CO or .CO command, scroll backward half the number of lines in the screen. (In the case of split screens, the default scrolling distance is corrected to half the current screen size.) It is an error if the movement is past the beginning of the file. .SS .SP Line: Set to the current line minus the amount scrolled. .SP Column: Set to the first nonblank character in the line. .SP Options: None. .SE .KY .IP "" Switch to the next lower screen in the window, or, to the first screen if there are no lower screens in the window. .SS .SP Line: Set to the previous cursor position in the window. .SP Column: Set to the previous cursor position in the window. .SP Options: None. .SE .KY .IP "[count] " Scroll backward .LI count lines, leaving the current line and column as is, if possible. It is an error if the movement is past the beginning of the file. .SS .SP Line: Unchanged unless the current line scrolls off the screen, in which case it is set to the last line of text displayed on the screen. .SP Column: Unchanged unless the current line scrolls off the screen, in which case it is the most attractive cursor position. .SP Options: None. .SE .KY .IP "" Suspend the current editor session. If the file has been modified since it was last completely written, and the .OP autowrite option is set, the file is written before the editor session is suspended. If this write fails, the editor session is not suspended. .SS .SP Line: Unchanged. .SP Column: Unchanged. .SP Options: Affected by the .OP autowrite option. .SE .KY .IP "" Execute .CO ex commands or cancel partial commands. If an .CO ex command is being entered (e.g. .CO / , .CO ? , .CO : or .CO ! ), the command is executed. If a partial command has been entered, e.g. .QT "[0-9]*" , or .QT "[0-9]*[!<>cdy]" , the command is cancelled. Otherwise, it is an error. .SS .SP Line: When an .CO ex command is being executed, the current line is set as described for that command. Otherwise, unchanged. .SP Column: When an .CO ex command is being executed, the current column is set as described for that command. Otherwise, unchanged. .SP Options: None. .SE .KY .IP "" Push a tag reference onto the tag stack. The tags files (see the .OP tags option for more information) are searched for a tag matching the current word. The current word begins at the first non-whitespace character on or after the current cursor position, and extends up to the next non-word character or the end of the line. If a matching tag is found, the current file is discarded and the file containing the tag reference is edited. .sp If the current file has been modified since it was last completely written, the command will fail. The .CO command is an absolute movement. .SS .SP Line: Set to the line containing the matching tag string. .SP Column: Set to the start of the matching tag string. .SP Options: Affected by the .OP tags and .OP taglength options. .SE .KY .IP "" Switch to the most recently edited file. .sp If the file has been modified since it was last completely written, and the .OP autowrite option is set, the file is written out. If this write fails, the command will fail. Otherwise, if the current file has been modified since it was last completely written, the command will fail. .SS .SP Line: Set to the line the cursor was on when the file was last edited. .SP Column: Set to the column the cursor was on when the file was last edited. .SP Options: Affected by the .OP autowrite option. .SE .KY .IP "[count] " .KY l .Ip "[count] l" Move the cursor forward .LI count characters without changing the current line. It is an error if the cursor is on the last character in the line. .sp The .CO and .CO \&l commands may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. In addition, these commands may be used as the motion components of other commands when the cursor is on the last character in the line, without error. .SS .SP Line: Unchanged. .SP Column: Set to the current character plus the next .LI count characters, or to the last character on the line if .LI count is greater than the number of characters in the line after the current character. .SP Options: None. .SE .KY ! .IP "[count] ! motion shell-argument(s)" Replace text with results from a shell command. Pass the lines specified by the .LI count and .LI motion arguments as standard input to the program named by the .OP shell option, and replace those lines with the output (both standard error and standard output) of that command. .sp After the motion is entered, .CO vi prompts for arguments to the shell command. .sp Within those arguments, .QT % and .QT # characters are expanded to the current and alternate pathnames, respectively. The .QT ! character is expanded with the command text of the previous .CO ! or .CO :! commands. (Therefore, the command .CO !! repeats the previous .CO ! command.) The special meanings of .QT % , .QT # and .QT ! can be overridden by escaping them with a backslash. If no .CO ! or .CO :! command has yet been executed, it is an error to use an unescaped .QT ! character as a shell argument. The .CO ! command does .i not do shell expansion on the strings provided as arguments. If any of the above expansions change the arguments the user entered, the command is redisplayed at the bottom of the screen. .sp .CO Vi then executes the program named by the .OP shell option, with a .b \-c flag followed by the arguments (which are bundled into a single argument). .sp The .CO ! command is permitted in an empty file. .sp If the file has been modified since it was last completely written, the .CO ! command will warn you. .SS .SP Line: The first line of the replaced text. .SP Column: The first column of the replaced text. .SP Options: Affected by the .OP shell option. .SE .KY # .IP "[count] # #|+|-" Increment or decrement the number referenced by the cursor. If the trailing character is a .LI \&+ or .LI \&# , the number is incremented by .LI count . If the trailing character is a .LI \&- , the number is decremented by .LI count . .sp A leading .QT \&0X or .QT \&0x causes the number to be interpreted as a hexadecimal number. Otherwise, a leading .QT \&0 causes the number to be interpreted as an octal number, unless a non-octal digit is found as part of the number. Otherwise, the number is interpreted as a decimal number, and may have a leading .LI \&+ or .LI \&- sign. The current number begins at the first non-blank character at or after the current cursor position, and extends up to the end of the line or the first character that isn't a possible character for the numeric type. The format of the number (e.g. leading 0's, signs) is retained unless the new value cannot be represented in the previous format. .sp Octal and hexadecimal numbers, and the result of the operation, must fit into an .QT "unsigned long" . Similarly, decimal numbers and their result must fit into a .QT "signed long" . It is an error to use this command when the cursor is not positioned at a number. .sp .SS .SP Line: Unchanged. .SP Column: Set to the first character in the cursor number. .SP Options: None. .SE .KY $ .IP "[count] $" Move the cursor to the end of a line. If .LI count is specified, the cursor moves down .LI "count - 1" lines. .sp It is not an error to use the .CO $ command when the cursor is on the last character in the line or when the line is empty. .sp The .CO $ command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the cursor is at, or before the first nonblank character in the line, in which case it is line oriented. It is not an error to use the .CO $ command as a motion component when the cursor is on the last character in the line, although it is an error when the line is empty. .SS .SP Line: Set to the current line plus .LI count minus 1. .SP Column: Set to the last character in the line. .SP Options: None. .SE .KY % .IP % Move to the matching character. The cursor moves to the parenthesis or curly brace which .i matches the parenthesis or curly brace found at the current cursor position or which is the closest one to the right of the cursor on the line. It is an error to execute the .CO % command on a line without a parenthesis or curly brace. Historically, any .LI count specified to the .CO % command was ignored. .sp The .CO % command is an absolute movement. The .CO % command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the starting point of the region is at or before the first nonblank character on its line, and the ending point is at or after the last nonblank character on its line, in which case it is line oriented. .SS .SP Line: Set to the line containing the matching character. .SP Column: Set to the matching character. .SP Options: None. .SE .KY & .IP "&" Repeat the previous substitution command on the current line. .sp Historically, any .LI count specified to the .CO & command was ignored. .SS .SP Line: Unchanged. .SP Column: Unchanged if the cursor was on the last character in the line, otherwise, set to the first nonblank character in the line. .SP Options: Affected by the .OP edcompatible , .OP extended , .OP ignorecase and .OP magic options. .SE .KY SQUOTE .IP \' .KY ` .Ip ` Return to a context marked by the character .LI . If .LI is the .QT ' or .QT ` character, return to the previous context. If .LI is any other character, return to the context marked by that character (see the .CO m command for more information). If the command is the .CO \' command, only the line value is restored, and the cursor is placed on the first nonblank character of that line. If the command is the .CO ` command, both the line and column values are restored. .sp It is an error if the context no longer exists because of line deletion. (Contexts follow lines that are moved, or which are deleted and then restored.) .sp The .CO \' and .CO ` commands are both absolute movements. They may be used as a motion component for other .CO vi commands. For the .CO \' command, any text copied into a buffer is line oriented. For the .CO ` command, any text copied into a buffer is character oriented, unless it both starts and stops at the first character in the line, in which case it is line oriented. In addition, when using the .CO ` command as a motion component, commands which move backward and started at the first character in the line, or move forward and ended at the first character in the line, are corrected to the last character of the line preceding the starting and ending lines, respectively. .SS .SP Line: Set to the line from the context. .SP Column: Set to the first nonblank character in the line, for the .CO \' command, and set to the context's column for the .CO ` command. .SP Options: None. .SE .KY ( .IP "[count] (" Back up .LI count sentences. .sp The .CO ( command is an absolute movement. The .CO ( command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the starting and stopping points of the region are the first character in the line, in which case it is line oriented. If it is line oriented, the starting point of the region is adjusted to be the end of the line immediately before the starting cursor position. .SS .SP Line: Set to the line containing the beginning of the sentence. .SP Column: Set to the first nonblank character of the sentence. .SP Options: Affected by the .OP lisp option. .SE .KY ) .IP "[count] )" Move forward .LI count sentences. .sp The .CO ) command is an absolute movement. The .CO ) command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the starting point of the region is the first character in the line, in which case it is line oriented. In the latter case, if the stopping point of the region is also the first character in the line, it is adjusted to be the end of the line immediately before it. .SS .SP Line: Set to the line containing the beginning of the sentence. .SP Column: Set to the first nonblank character of the sentence. .SP Options: Affected by the .OP lisp option. .SE .KY , .IP "[count] ," Reverse find character .LI count times. Reverse the last .CO F , .CO f , .CO T or .CO t command, searching the other way in the line, .LI count times. It is an error if a .CO F , .CO f , .CO T or .CO t command has not been performed yet. .sp The .CO , command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the searched-for character for the .CO F and .CO f commands, before the character for the .CO t command and after the character for the .CO T command. .SP Options: None. .SE .KY MINUSSIGN .IP "[count] \-" Move to the first nonblank of the previous line, .LI count times. .sp It is an error if the movement is past the beginning of the file. .sp The .CO - command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .SS .SP Line: Set to the current line minus .LI count . .SP Column: Set to the first nonblank character in the line. .SP Options: None. .SE .KY \&. .IP "[count] \&." Repeat the last .CO vi command that modified text. The repeated command may be a command and motion component combination. If .LI count is specified, it replaces .i both the count specified for the repeated command, and, if applicable, for the repeated motion component. If .LI count is not specified, the counts originally specified to the command being repeated are used again. .sp As a special case, if the .CO \. command is executed immediately after the .CO u command, the change log is rolled forward or backward, depending on the action of the .CO u command. .SS .SP Line: Set as described for the repeated command. .SP Column: Set as described for the repeated command. .SP Options: None. .SE .KY /RE/ .IP "/RE" .Ip "/RE/ [offset]" .KY ?RE? .Ip "?RE" .Ip "?RE? [offset]" .KY N .Ip "N" .KY n .Ip "n" Search forward or backward for a regular expression. The commands beginning with a slash .PQ / character are forward searches, the commands beginning with a question mark .PQ ? are backward searches. .CO Vi prompts with the leading character on the last line of the screen for a string. It then searches forward or backward in the file for the next occurrence of the string, which is interpreted as a Basic Regular Expression. .sp The .CO / and .CO ? commands are absolute movements. They may be used as the motion components of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the search started and ended on the first column of a line, in which case it is line oriented. In addition, forward searches ending at the first character of a line, and backward searches beginning at the first character in the line, are corrected to begin or end at the last character of the previous line. (Note, forward and backward searches can occur for both .CO / and .CO ? commands, if the .OP wrapscan option is set.) .sp If an offset from the matched line is specified (i.e. a trailing .QT / or .QT ? character is followed by a signed offset), the buffer will always be line oriented (e.g. .QT /string/+0 will always guarantee a line orientation). .sp The .CO N command repeats the previous search, but in the reverse direction. The .CO n command repeats the previous search. If either the .CO N or .CO n commands are used as motion components for the .CO ! command, you will not be prompted for the text of the bang command, instead the previous bang command will be executed. .sp Missing RE's (e.g. .QT // , .QT / , .QT ?? , or .QT ? search for the last search RE, in the indicated direction. .sp Searches may be interrupted using the .LI character. .sp Multiple search patterns may be grouped together by delimiting them with semicolons and zero or more whitespace characters, e.g. .LI "/foo/ ; ?bar?" searches forward for .LI foo and then, from that location, backwards for .LI bar . When search patterns are grouped together in this manner, the search patterns are evaluated left to right with the final cursor position determined by the last search pattern. .sp It is also permissible to append a .CO z command to the search strings, e.g. .LI "/foo/ z." searches forward for the next occurrence of .LI foo , and then positions that line in the middle of screen. .SS .SP Line: Set to the line in which the match occurred. .SP Column: Set to the first character of the matched string. .SP Options: Affected by the .OP edcompatible , .OP extended , .OP ignorecase , .OP magic , and .OP wrapscan options. .SE .KY 0 .IP "0" Move to the first character in the current line. It is not an error to use the .CO 0 command when the cursor is on the first character in the line, .sp The .CO 0 command may be used as the motion component of other .CO vi commands, in which case it is an error if the cursor is on the first character in the line, and any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the first character in the line. .SP Options: None. .SE .KY : .IP ":" Execute an .CO ex command. .CO Vi prompts for an .CO ex command on the last line of the screen, using a colon .PQ : character. The command is terminated by a .LI , .LI or .LI character; all of these characters may be escaped by using a .LI "" character. The command is then executed. .sp If the .CO ex command writes to the screen, .CO vi will prompt the user for a .LI before continuing when the .CO ex command finishes. Large amounts of output from the .CO ex command will be paged for the user, and the user prompted for a .LI or .LI key to continue. In some cases, a quit (normally a .QQ q character) or .LI may be entered to interrupt the .CO ex command. .sp When the .CO ex command finishes, and the user is prompted to resume visual mode, it is also possible to enter another .QT : character followed by another .CO ex command. .SS .SP Line: The current line is set as described for the .CO ex command. .SP Column: The current column is set as described for the .CO ex command. .SP Options: Affected as described for the .CO ex command. .SE .KY ; .IP "[count] ;" Repeat the last character find .LI count times. The last character find is one of the .CO F , .CO f , .CO T or .CO t commands. It is an error if a .CO F , .CO f , .CO T or .CO t command has not been performed yet. .sp The .CO ; command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the searched-for character for the .CO F and .CO f commands, before the character for the .CO t command and after the character for the .CO T command. .SP Options: None. .SE .KY < .IP "[count] < motion" .KY > .Ip "[count] > motion" Shift lines left or right. Shift the number of lines in the region specified by the .LI count and .LI motion left (for the .CO < command) or right (for the .CO > command) by the number of columns specified by the .OP shiftwidth option. Only whitespace characters are deleted when shifting left. Once the first character in the line no longer contains a whitespace character, the command will succeed, but the line will not be modified. .SS .SP Line: Unchanged. .SP Column: Set to the first nonblank character in the line. .SP Options: Affected by the .OP shiftwidth option. .SE .KY @ .IP "@ buffer" Execute a named buffer. Execute the named buffer as .CO vi commands. The buffer may include .CO ex commands, too, but they must be expressed as a .CO : command. If the buffer is line oriented, .LI characters are logically appended to each line of the buffer. If the buffer is character oriented, .LI characters are logically appended to all but the last line in the buffer. .sp If the buffer name is .QT @ , or .QT * , then the last buffer executed shall be used. It is an error to specify .QT @@ or .QT @* if there were no previous buffer executions. The text of a buffer may contain a .CO @ command, and it is possible to create infinite loops in this manner. (The .LI character may be used to interrupt the loop.) .SS .SP Line: The current line is set as described for the command(s). .SP Column: The current column is set as described for the command(s). .SP Options: None. .SE .KY A .IP "[count] A" Enter input mode, appending the text after the end of the line. If .LI count is specified, the text is repeatedly input .LI "count - 1" more times after input mode is exited. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY B .IP "[count] B" Move backward .LI count bigwords. Move the cursor backward to the beginning of a bigword by repeating the following algorithm: if the current position is at the beginning of a bigword or the character at the current position cannot be part of a bigword, move to the first character of the preceding bigword. Otherwise, move to the first character of the bigword at the current position. If no preceding bigword exists on the current line, move to the first character of the last bigword on the first preceding line that contains a bigword. .sp The .CO B command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Set to the line containing the word selected. .SP Column: Set to the first character of the word selected. .SP Options: None. .SE .KY C .IP "[buffer] [count] C" Change text from the current position to the end-of-line. If .LI count is specified, the input text replaces from the current position to the end-of-line, plus .LI "count - 1" subsequent lines. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY D .IP "[buffer] D" Delete text from the current position to the end-of-line. .sp It is not an error to execute the .CO D command on an empty line. .SS .SP Line: Unchanged. .SP Column: Set to the character before the current character, or, column 1 if the cursor was on column 1. .SP Options: None. .SE .KY E .IP "[count] E" Move forward .LI count end-of-bigwords. Move the cursor forward to the end of a bigword by repeating the following algorithm: if the current position is the end of a bigword or the character at that position cannot be part of a bigword, move to the last character of the following bigword. Otherwise, move to the last character of the bigword at the current position. If no succeeding bigword exists on the current line, move to the last character of the first bigword on the next following line that contains a bigword. .sp The .CO E command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Set to the line containing the word selected. .SP Column: Set to the last character of the word selected. .SP Options: None. .SE .KY F .IP "[count] F " Search .LI count times backward through the current line for .LI . .sp The .CO F command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the searched-for character. .SP Options: None. .SE .KY G .IP "[count] G" Move to line .LI count , or the last line of the file if .LI count not specified. .sp The .CO G command is an absolute movement. The .CO \&G command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .SS .SP Line: Set to .LI count , if specified, otherwise, the last line. .SP Column: Set to the first nonblank character in the line. .SP Options: None. .SE .KY H .IP "[count] H" Move to the screen line .LI "count - 1" lines below the top of the screen. .sp The .CO H command is an absolute movement. The .CO H command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .SS .SP Line: Set to the line .LI "count - 1" lines below the top of the screen. .SP Column: Set to the first nonblank character of the .i screen line. .SP Options: None. .SE .KY I .IP "[count] I" Enter input mode, inserting the text at the beginning of the line. If .LI count is specified, the text input is repeatedly input .LI "count - 1" more times. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: None. .SE .KY J .IP "[count] J" Join lines. If .LI count is specified, .LI count lines are joined; a minimum of two lines are always joined, regardless of the value of .LI count . .sp If the current line ends with a whitespace character, all whitespace is stripped from the next line. Otherwise, if the next line starts with a open parenthesis .PQ ( do nothing. Otherwise, if the current line ends with a question mark .PQ ? , period .PQ \&. or exclamation point .PQ ! , insert two spaces. Otherwise, insert a single space. .sp It is not an error to join lines past the end of the file, i.e. lines that do not exist. .SS .SP Line: Unchanged. .SP Column: Set to the character after the last character of the next-to-last joined line. .SP Options: None. .SE .KY L .IP "[count] L" Move to the screen line .LI "count - 1" lines above the bottom of the screen. .sp The .CO L command is an absolute movement. The .CO L command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .SS .SP Line: Set to the line .LI "count - 1" lines above the bottom of the screen. .SP Column: Set to the first nonblank character of the .i screen line. .SP Options: None. .SE .KY M .IP " M" Move to the screen line in the middle of the screen. .sp The .CO M command is an absolute movement. The .CO M command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .sp Historically, any .LI count specified to the .CO M command was ignored. .SS .SP Line: Set to the line in the middle of the screen. .SP Column: Set to the first nonblank character of the .i screen line. .SP Options: None. .SE .KY O .IP "[count] O" Enter input mode, appending text in a new line above the current line. If .LI count is specified, the text input is repeatedly input .LI "count - 1" more times. .sp Historically, any .LI count specified to the .CO O command was ignored. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY P .IP "[buffer] P" Insert text from a buffer. Text from the buffer (the unnamed buffer by default) is inserted before the current column or, if the buffer is line oriented, before the current line. .SS .SP Line: Set to the lowest numbered line insert, if the buffer is line oriented, otherwise unchanged. .SP Column: Set to the first nonblank character of the appended text, if the buffer is line oriented, otherwise, the last character of the appended text. .SP Options: None. .SE .KY Q .IP "Q" Exit .CO vi (or visual) mode and switch to .CO ex mode. .SS .SP Line: Unchanged. .SP Column: No longer relevant. .SP Options: None. .SE .KY R .IP "[count] R" Enter input mode, replacing the characters in the current line. If .LI count is specified, the text input is repeatedly input .LI "count - 1" more times. .sp If the end of the current line is reached, no more characters are replaced and any further characters input are appended to the line. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY S .IP "[buffer] [count] S" Substitute .LI count lines. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY T .IP "[count] T " Search backward, .LI count times, through the current line for the character .i after the specified .LI . .sp The .CO T command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the character .i after the searched-for character. .SP Options: None. .SE .KY U .IP "U" Restore the current line to its state before the cursor last moved to it. .SS .SP Line: Unchanged. .SP Column: The first character in the line. .SP Options: None. .SE .KY W .IP "[count] W" Move forward .LI count bigwords. Move the cursor forward to the beginning of a bigword by repeating the following algorithm: if the current position is within a bigword or the character at that position cannot be part of a bigword, move to the first character of the next bigword. If no subsequent bigword exists on the current line, move to the first character of the first bigword on the first following line that contains a bigword. .sp The .CO W command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: The line containing the word selected. .SP Column: The first character of the word selected. .SP Options: None. .SE .KY X .IP "[buffer] [count] X" Delete .LI count characters before the cursor. If the number of characters to be deleted is greater than or equal to the number of characters to the beginning of the line, all of the characters before the current cursor position, to the beginning of the line, are deleted. .SS .SP Line: Unchanged. .SP Column: Set to the current character minus .LI count , or the first character if count is greater than the number of characters in the line before the cursor. .SP Options: None. .SE .KY Y .IP "[buffer] [count] Y" Copy (or .QQ yank ) .LI count lines into the specified buffer. .SS .SP Line: Unchanged. .SP Column: Unchanged. .SP Options: None. .SE .KY ZZ .IP "ZZ" Write the file and exit .CO vi . The file is only written if it has been modified since the last complete write of the file to any file. .sp The .CO ZZ command will exit the editor after writing the file, if there are no further files to edit. Entering two .QQ quit commands (i.e. .CO wq , .CO quit , .CO xit or .CO ZZ ) in a row will override this check and the editor will exit, ignoring any files that have not yet been edited. .SS .SP Line: Unchanged. .SP Column: Unchanged. .SP Options: None. .SE .KY [[ .IP "[count] [[" Back up .LI count section boundaries. .sp The .CO [[ command is an absolute movement. The .CO [[ command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the starting position is column 0, in which case it is line oriented. .sp It is an error if the movement is past the beginning of the file. .SS .SP Line: Set to the previous line that is .LI count section boundaries back, or the first line of the file if no more section boundaries exist preceding the current line. .SP Column: Set to the first nonblank character in the line. .SP Options: Affected by the .OP sections option. .SE .KY ]] .IP "[count] ]]" Move forward .LI count section boundaries. .sp The .CO ]] command is an absolute movement. The .CO ]] command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the starting position is column 0, in which case it is line oriented. .sp It is an error if the movement is past the end of the file. .SS .SP Line: Set to the line that is .LI count section boundaries forward, or to the last line of the file if no more section boundaries exist following the current line. .SP Column: Set to the first nonblank character in the line. .SP Options: Affected by the .OP sections option. .SE .KY ^ .IP "\&^" Move to first nonblank character on the current line. .sp The .CO ^ command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the first nonblank character of the current line. .SP Options: None. .SE .KY _ .IP "[count] _" Move down .LI "count - 1" lines, to the first nonblank character. The .CO _ command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is line oriented. .sp It is not an error to execute the .CO _ command when the cursor is on the first character in the line. .SS .SP Line: The current line plus .LI "count - 1" . .SP Column: The first nonblank character in the line. .SP Options: None. .SE .KY a .IP "[count] a" Enter input mode, appending the text after the cursor. If .LI count is specified, the text input is repeatedly input .LI "count - 1" more times. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY b .IP "[count] b" Move backward .LI count words. Move the cursor backward to the beginning of a word by repeating the following algorithm: if the current position is at the beginning of a word, move to the first character of the preceding word. Otherwise, the current position moves to the first character of the word at the current position. If no preceding word exists on the current line, move to the first character of the last word on the first preceding line that contains a word. .sp The .CO b command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Set to the line containing the word selected. .SP Column: Set to the first character of the word selected. .SP Options: None. .SE .KY c .IP "[buffer] [count] c motion" Change the region of text specified by the .LI count and .LI motion . If only part of a single line is affected, then the last character being changed is marked with a .QT $ . Otherwise, the region of text is deleted, and input mode is entered. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY d .IP "[buffer] [count] d motion" Delete the region of text specified by the .LI count and .LI motion . .SS .SP Line: Set to the line where the region starts. .SP Column: Set to the first character in the line after the last character in the region. If no such character exists, set to the last character before the region. .SP Options: None. .SE .KY e .IP "[count] e" Move forward .LI count end-of-words. Move the cursor forward to the end of a word by repeating the following algorithm: if the current position is the end of a word, move to the last character of the following word. Otherwise, move to the last character of the word at the current position. If no succeeding word exists on the current line, move to the last character of the first word on the next following line that contains a word. .sp The .CO e command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Set to the line containing the word selected. .SP Column: Set to the last character of the word selected. .SP Options: None. .SE .KY f .IP "[count] f " Search forward, .LI count times, through the rest of the current line for .LI . .sp The .CO f command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the searched-for character. .SP Options: None. .SE .KY i .IP "[count] i" Enter input mode, inserting the text before the cursor. If .LI count is specified, the text input is repeatedly input .LI "count - 1" more times. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY m .IP "m " Save the current context (line and column) as .LI . The exact position is referred to by .QT ` . The line is referred to by .QT ' . .sp Historically, .LI was restricted to lower-case letters. .CO Nvi permits the use of any character. .SS .SP Line: Unchanged. .SP Column: Unchanged. .SP Options: None. .SE .KY o .IP "[count] o" Enter input mode, appending text in a new line under the current line. If .LI count is specified, the text input is repeatedly input .LI "count - 1" more times. .sp Historically, any .LI count specified to the .CO o command was ignored. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY p .IP "[buffer] p" Append text from a buffer. Text from the buffer (the unnamed buffer by default) is appended after the current column or, if the buffer is line oriented, after the current line. .SS .SP Line: Set to the first line appended, if the buffer is line oriented, otherwise unchanged. .SP Column: Set to the first nonblank character of the appended text if the buffer is line oriented, otherwise, the last character of the appended text. .SP Options: None. .SE .KY r .IP "[count] r " Replace characters. The next .LI count characters in the line are replaced with .LI . Replacing characters with .LI characters results in creating new, empty lines into the file. .sp If .LI is .LI , the command is cancelled. .SS .SP Line: Unchanged unless the replacement character is a .LI , in which case it is set to the current line plus .LI "count - 1" . .SP Column: Set to the last character replaced, unless the replacement character is a .LI , in which case the cursor is in column 1 of the last line inserted. .SP Options: None. .SE .KY s .IP "[buffer] [count] s" Substitute .LI count characters in the current line starting with the current character. .SS .SP Line: Set to the last line upon which characters were entered. .SP Column: Set to the last character entered. .SP Options: Affected by the .OP altwerase , .OP autoindent , .OP beautify , .OP showmatch , .OP ttywerase and .OP wrapmargin options. .SE .KY t .IP "[count] t " Search forward, .LI count times, through the current line for the character immediately .i before .LI . .sp The .CO t command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Unchanged. .SP Column: Set to the character .i before the searched-for character. .SP Options: None. .SE .KY u .IP "u" Undo the last change made to the file. If repeated, the .CO u command alternates between these two states, and is its own inverse. When used after an insert that inserted text on more than one line, the lines are saved in the numeric buffers. .sp The .CO \&. command, when used immediately after the .CO u command, causes the change log to be rolled forward or backward, depending on the action of the .CO u command. .SS .SP Line: Set to the position of the first line changed, if the reversal affects only one line or represents an addition or change; otherwise, the line preceding the deleted text. .SP Column: Set to the cursor position before the change was made. .SP Options: None. .SE .KY w .IP "[count] w" Move forward .LI count words. Move the cursor forward to the beginning of a word by repeating the following algorithm: if the current position is at the beginning of a word, move to the first character of the next word. If no subsequent word exists on the current line, move to the first character of the first word on the first following line that contains a word. .sp The .CO w command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. .SS .SP Line: Set to the line containing the word selected. .SP Column: Set to the first character of the word selected. .SP Options: None. .SE .KY x .IP "[buffer] [count] x" Delete .LI count characters. The deletion is at the current character position. If the number of characters to be deleted is greater than or equal to the number of characters to the end of the line, all of the characters from the current cursor position to the end of the line are deleted. .SS .SP Line: Unchanged. .SP Column: Unchanged unless the last character in the line is deleted and the cursor is not already on the first character in the line, in which case it is set to the previous character. .SP Options: None. .SE .KY y .IP "[buffer] [count] y motion" Copy (or .QQ yank ) the text region specified by the .LI count and .LI motion , into a buffer. .SS .SP Line: Unchanged, unless the region covers more than a single line, in which case it is set to the line where the region starts. .SP Column: Unchanged, unless the region covers more than a single line, in which case it is set to the character were the region starts. .SP Options: None. .SE .KY z .IP "[count1] z [count2] type" Redraw the screen with a window .LI count2 lines long, with line .LI count1 placed as specified by the .LI type character. If .LI count1 is not specified, it defaults to the current line. If .LI count2 is not specified, it defaults to the current window size. .sp The following .LI type characters may be used: .SS .SP + If .LI count1 is specified, place the line .LI count1 at the top of the screen. Otherwise, display the screen after the current screen, similarly to the .CO command. .SP Place the line .LI count1 at the top of the screen. .SP \&. Place the line .LI count1 in the center of the screen. .SP \- Place the line .LI count1 at the bottom of the screen. .SP ^ If .LI count1 is specified, place the line that is at the top of the screen when .LI count1 is at the bottom of the screen, at the bottom of the screen, i.e. display the screen before the screen before .LI count1 . Otherwise, display the screen before the current screen, similarly to the .CO command. .SE .SS .SP Line: Set to .LI count1 unless .LI count1 is not specified and the .LI type character was either .QT ^ or .QT + , in which case it is set to the line before the first line on the previous screen or the line after the last line on the previous screen, respectively. .SP Column: Set to the first nonblank character in the line. .SP Options: None. .SE .KY { .IP "[count] {" Move backward .LI count paragraphs. .sp The .CO { command is an absolute movement. The .CO { command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the starting character is the first character on its line, in which case it is line oriented. .SS .SP Line: Set to the line containing the beginning of the previous paragraph. .SP Column: Set to the first nonblank character in the line. .SP Options: Affected by the .OP paragraph option. .SE .KY | .IP "[count] |" Move to a specific .i column position on the current line. .sp The .CO | command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented. It is an error to use the .CO | command as a motion component and for the cursor not to move. .SS .SP Line: Unchanged. .SP Column: Set to the character occupying the column position identified by .LI count , if the position exists in the line. If the column length of the current line is less than .LI count , the cursor is moved to the last character in the line. .SP Options: None. .SE .KY } .IP "[count] }" Move forward .LI count paragraphs. .sp The .CO } command is an absolute movement. The .CO } command may be used as the motion component of other .CO vi commands, in which case any text copied into a buffer is character oriented, unless the starting character is at or before any nonblank characters in its line, in which case it is line oriented. .SS .SP Line: Set to the line containing the beginning of the next paragraph. .SP Column: Set to the first nonblank character in the line. .SP Options: Affected by the .OP paragraph option. .SE .KY ~ .IP "[count] ~" Reverse the case of the next .LI count character(s). This is the historic semantic for the .CO ~ command and it is only in effect if the .OP tildeop option is not set. .sp Lowercase alphabetic characters are changed to uppercase, and uppercase characters are changed to lowercase. No other characters are affected. .sp Historically, the .CO ~ command did not take an associated count, nor did it move past the end of the current line. As it had no associated motion it was difficult to change the case of large blocks of text. In .CO nvi , if the cursor is on the last character of a line, and there are more lines in the file, the cursor moves to the next line. .sp It is not an error to specify a count larger than the number of characters between the cursor and the end of the file. .SS .SP Line: Set to the line of the character after .LI count characters, or, end of file. .SP Column: Set to the character after .LI count characters, or, end-of-file. .SP Options: Affected by the .OP tildeop option. .SE .KY ~ .IP "[count] ~ motion" Reverse the case of the characters in a text region specified by the .LI count and .LI motion . Only in effect if the .OP tildeop option is set. .sp Lowercase characters are changed to uppercase, and uppercase characters are changed to lowercase. No other characters are affected. .SS .SP Line: Set to the line of the character after the last character in the region. .SP Column: Set to the character after the last character in the region. .SP Options: Affected by the .OP tildeop option. .SE .KY .IP "" Interrupt the current operation. Many of the potentially long-running .CO vi commands may be interrupted using the terminal interrupt character. These operations include searches, file reading and writing, filter operations and map character expansion. Interrupts are also enabled when running commands outside of .CO vi . .sp If the .LI character is used to interrupt while entering an .CO ex command, the command is aborted, the cursor returns to its previous position, and .CO vi remains in command mode. .sp Generally, if the .LI character is used to interrupt any operation, any changes made before the interrupt are left in place. .SS .SP Line: Dependent on the operation being interrupted. .SP Column: Dependent on the operation being interrupted. .SP Options: None. .SH 1 "Vi Text Input Commands" .pp The following section describes the commands available in the text input mode of the .CO vi editor. .pp Historically, .CO vi implementations only permitted the characters inserted on the current line to be erased. In addition, only the .LI erase character and the .QT 0 and .QT ^ erase strings could erase autoindent characters. (Autoindent characters include both the characters inserted automatically at the beginning of an input line as well as characters inserted using the .LI command.) This implementation permits erasure to continue past the beginning of the current line, and back to where text input mode was entered. In addition, autoindent characters may be erased using the standard erase characters. For the line and word erase characters, reaching the autoindent characters forms a .QQ soft boundary, denoting the end of the current word or line erase. Repeating the word or line erase key will erase the autoindent characters. .pp Historically, .CO vi always used .LI and .LI as character and word erase characters, respectively, regardless of the current terminal settings. This implementation accepts, in addition to these two characters, the current terminal characters for those operations. .KY .IP "" If the first character of the input is a .LI , the previous input is replayed, as if just entered. .KY .IP "" If the previous character on the line was an autoindent character, erase characters to move the cursor back to the column immediately after the previous (1-based) column which is a multiple of the .OP shiftwidth edit option. This may result in any number of .LI and .LI characters preceding the cursor being changed. .sp Otherwise, if the .OP autoindent option is set and the user is entering the first character in the line, .LI is ignored. Otherwise, a literal .LI character is entered. .KY ^ .IP "^" If the previous character on the line was an autoindent character, erase all of the autoindent characters on the line. In addition, the autoindent level is reset to 0. .KY 0 .IP "0" If the previous character on the line was an autoindent character, erase all of the autoindent characters on the line. The autoindent level is not altered. .KY .IP "" Insert sufficient .LI and .LI characters to move the cursor forward to the column immediately after the next (1-based) column which is a multiple of the .OP shiftwidth edit option. This may result in any number of .LI and .LI characters preceding the cursor being changed. .sp Historically, .CO vi did not permit the .LI command to be used unless the cursor was at the first column of a new line or it was preceded only by autoindent characters. .CO Nvi permits it to be used at any time during insert mode. .KY .IP .KY .Ip Erase the last character. .KY "" .IP "" Quote the next character. The next character will not be mapped (see the .CO map command for more information) or interpreted specially. A carat .PQ ^ character will be displayed immediately as a placeholder, but will be replaced by the next character. .KY .IP If on the colon command line, and the .OP filec edit option is set, behave as described for that option. Otherwise, if on the colon command line, execute the command. Otherwise, if not on the colon command line, resolve all text input into the file, and return to command mode. .KY "" .IP "" Erase the current line. .KY "" .IP "" .KY "" .Ip "" Erase the last word. The definition of word is dependent on the .OP altwerase and .OP ttywerase options. .KY "" .IP "[0-9A-Fa-f]+" Insert a character with the specified hexadecimal value into the text. The value is delimited by any non-hexadecimal character or the input of the maximum number of characters that can be translated into a single character value. .KY .IP "" Interrupt text input mode, returning to command mode. If the .LI character is used to interrupt inserting text into the file, it is as if the .LI character was used; all text input up to the interruption is resolved into the file. vigor-0.016.orig/docs/USD.doc/vi.ref/merge.awk0100644000076400007640000000033607103707243017416 0ustar cjw44cjw44# @(#)merge.awk 8.3 (Berkeley) 5/25/94 # # merge index entries into one line per label $1 == prev { printf ", %s", $2; next; } { if (NR != 1) printf "\n"; printf "%s \t%s", $1, $2; prev = $1; } END { printf "\n" } vigor-0.016.orig/docs/USD.doc/vi.ref/vi.ref0100644000076400007640000013142507103707243016733 0ustar cjw44cjw44.\" Copyright (c) 1994 .\" The Regents of the University of California. All rights reserved. .\" Copyright (c) 1994, 1995, 1996 .\" Keith Bostic. All rights reserved. .\" .\" This document may not be republished without written permission from .\" Keith Bostic. .\" .\" See the LICENSE file for redistribution information. .\" .\" @(#)vi.ref 8.88 (Berkeley) 10/19/96 .\" .\" .so ref.so .tp .(l C .ps 12 .ft B Vi/Ex Reference Manual .ft .ps .sp .i "Keith Bostic" .sp Computer Science Division Department of Electrical Engineering and Computer Science University of California, Berkeley Berkeley, California 94720 .sp 1 \*(td .)l .sp 3 .(l C .i Abstract .)l .(q .pp This document is the reference guide for the 4.4BSD implementations of .EV nex nvi , which are implementations of the historic Berkeley .EV ex vi editors. .)q .sp 3 .(l C .i Licensing .)l .sp .lp Copyright (c) 1991, 1992, 1993, 1994 .ti +5 The Regents of the University of California. All Rights Reserved. .lp Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996 .ti +5 Keith Bostic. All Rights Reserved. .sp .pp The vi program is freely redistributable. You are welcome to copy, modify and share it with others under the conditions listed in the LICENSE file. If any company (not individual!) finds vi sufficiently useful that you would have purchased it, or if any company wishes to redistribute it, contributions to the authors would be appreciated. .bp 2 .(l C .i Acknowledgements .)l .sp .(q .pp Bruce Englar encouraged the early development of the historic .EV ex vi editor. Peter Kessler helped bring sanity to version 2's command layout. Bill Joy wrote versions 1 and 2.0 through 2.7, and created the framework that users see in the present editor. Mark Horton added macros and other features and made .EV ex vi work on a large number of terminals and Unix systems. .pp .CO Nvi is originally derived from software contributed to the University of California, Berkeley by Steve Kirkendall, the author of the .CO vi clone .CO elvis . .pp IEEE Standard Portable Operating System Interface for Computer Environments (POSIX) 1003.2 style Regular Expression support was done by Henry Spencer. .pp The curses library was originally done by Ken Arnold. Scrolling and reworking for .CO nvi was done by Elan Amir. .pp George Neville-Neil added the Tcl interpreter, and Sven Verdoolaege added the Perl interpreter. .pp Rob Mayoff added Cscope support. .pp The Institute of Electrical and Electronics Engineers has given us permission to reprint portions of their documentation. Portions of this document are reprinted and reproduced from IEEE Std 1003.2-1992, IEEE Standard Portable Operating System Interface for Computer Environments (POSIX), copyright 1992 by the Institute of Electrical and Electronics Engineers, Inc. .pp The financial support of UUNET Communications Services is gratefully acknowledged. .)q .sy echo -n >index .oh 'Vi/Ex Reference''USD:13-%' .eh 'USD:13-%''Vi/Ex Reference' .bp 4 .SH 1 Description .pp .CO Vi is a screen oriented text editor. .CO Ex is a line-oriented text editor. .CO Ex and .CO vi are different interfaces to the same program, and it is possible to switch back and forth during an edit session. .CO View is the equivalent of using the .b \-R (read-only) option of .CO vi . .pp This reference manual is the one provided with the .EV nex nvi versions of the .EV ex vi text editors. .EV Nex nvi are intended as bug-for-bug compatible replacements for the original Fourth Berkeley Software Distribution (4BSD) .EV ex vi programs. This reference manual is accompanied by a traditional-style manual page. That manual page describes the functionality found in .EV ex vi in far less detail than the description here. In addition, it describes the system interface to .EV ex vi , e.g. command line options, session recovery, signals, environmental variables, and similar things. .pp This reference is intended for users already familiar with .EV ex vi . Anyone else should almost certainly read a good tutorial on the editor first. If you are in an unfamiliar environment, and you absolutely have to get work done immediately, see the section entitled .QB "Fast Startup" in the manual page. It is probably enough to get you started. .pp There are a few features in .EV nex nvi that are not found in historic versions of .EV ex vi . Some of the more interesting of those features are briefly described in the next section, entitled .QB "Additional Features" . For the rest of this document, .EV nex nvi is used only when it is necessary to distinguish it from the historic implementations of .EV ex vi . .pp Future versions of this software will be periodically made available by anonymous ftp, and can be retrieved from .LI ftp.cs.berkeley.edu , in the directory .LI ucb/4bsd . .SH 1 "Additional Features in Nex/Nvi" .pp There are a few features in .EV nex nvi that are not found in historic versions of .EV ex vi . Some of the more interesting of these are as follows: .IP "8-bit clean data, large lines, files" .EV Nex nvi will edit any format file. Line lengths are limited by available memory, and file sizes are limited by available disk space. The .CO vi text input mode command .CO can insert any possible character value into the text. .IP "Background and foreground screens" The .CO bg command backgrounds the current screen, and the .CO fg command foregrounds backgrounded screens. The .CO display command can be used to list the background screens. .IP "Command Editing" You can enter a normal editing window on the collected commands that you've entered on the .CO vi colon command-line, and then modify and/or execute the commands. See the .OP cedit edit option for more information. .IP "Displays" The .CO display command can be used to display the current buffers, the backgrounded screens, and the tags stack. .IP "Extended Regular Expressions" The .CO extended option causes Regular Expressions to be interpreted as as Extended Regular Expressions, (i.e. \fIegrep\fP(1) style Regular Expressions). .IP "File Name Completion" It is possible to do file name completion and file name displays when entering commands on the .CO vi colon command-line. See the .OP filec option for more information. .IP "Infinite undo" Changes made during an edit session may be rolled backward and forward. A .CO \&. command immediately after a .CO u command continues either forward or backward depending on whether the .CO u command was an undo or a redo. .IP "Left-right scrolling" The .CO leftright option causes .CO nvi to do left-right screen scrolling, instead of the traditional .CO vi line wrapping. .IP "Message Catalogs" It is possible to display informational and error messages in different languages by providing a catalog of messages. See the .OP msgcat option and the file .LI "catalog/README" for more information. .IP "Incrementing numbers" The .CO \&# command increments or decrements the number referenced by the cursor. .IP "Previous file" The .CO previous command edits the previous file from the argument list. .IP "Scripting languages" The .CO ":pe[rl] cmd" , .CO ":perld[o] cmd" and .CO ":tc[l] cmd" commands execute Perl and Tcl/Tk commands, respectively, on lines from the edit buffer. See the .QB "Scripting Languages" section and the specific commands for more information. .\".IP "Shell screens" .\"The .\".CO ":sc[ript] [file ...]" .\"command runs a shell in the screen. .\"Editing is unchanged, with the exception that a \fC\fP .\"enters the current line (stripped of any prompt) as input to the .\"shell. .IP "Split screens" The .CO Edit , .CO Ex , .CO Next , .CO Previous , .CO Tag and .CO Visual (in .CO vi mode) commands divide the screen into multiple editing regions and then perform their normal function in a new screen area. The .CO command rotates between the foreground screens. The .CO resize command can be used to grow or shrink a particular screen. .IP "Tag stacks" Tags are now maintained in a stack. The .CO command returns to the previous tag location. The .CO tagpop command returns to the most recent tag location by default, or, optionally to a specific tag number in the tag stack, or the most recent tag from a specified file. The .CO display command can be used to list the tags stack. The .CO tagtop command returns to the top of the tag stack. .IP "Usage information" The .CO exusage and .CO viusage commands provide usage information for all of the .CO ex and .CO vi commands by default, or, optionally, for a specific command or key. .IP "Word search" The .CO command searches for the word referenced by the cursor. .SH 1 "Startup Information" .pp .EV Ex vi interprets one of two possible environmental variables and reads up to three of five possible files during startup. The variables and files are expected to contain .CO ex commands, not .CO vi commands. In addition, they are interpreted .i before the file to be edited is read, and therefore many .CO ex commands may not be used. Generally, any command that requires output to the screen or that needs a file upon which to operate, will cause an error if included in a startup file or environmental variable. .pp Because the .CO ex command set supported by .EV nex nvi is a superset of the command set supported by historical implementations of .CO ex , .EV nex nvi can use the startup files created for the historical implementations, but the converse may not be true. .pp If the .b \-s (the historic \- option) is specified, or if standard input is redirected from a file, all environmental variables and startup files are ignored. .pp Otherwise, startup files and environmental variables are handled in the following order: .np The file .LI /etc/vi.exrc is read, as long as it is owned by root or the effective user ID of the user. .np The environmental variable .LI NEXINIT (or the variable .LI EXINIT , if .LI NEXINIT is not set) is interpreted. .np If neither .LI NEXINIT or .LI EXINIT was set, and the .LI HOME environmental variable is set, the file .LI $HOME/.nexrc (or the file .LI $HOME/.exrc , if .LI $HOME/.nexrc does not exist) is read, as long as the effective user ID of the user is root or is the same as the owner of the file. .sp When the $HOME directory is being used for both .EV nex nvi and an historic implementation of .EV ex vi , a possible solution is to put .EV nex nvi specific commands in the .LI \&.nexrc file, along with a .CO ":source $HOME/.exrc" command to read in the commands common to both implementations. .np If the .OP exrc option was turned on by one of the previous startup information sources, the file .LI \&.nexrc (or the file .LI \&.exrc , if .LI \&.nexrc does not exist) is read, as long as the effective user ID of the user is the same as the owner of the file. .pp No startup file is read if it is writable by anyone other than its owner. .pp It is not an error for any of the startup environmental variables or files not to exist. .pp Once all environmental variables are interpreted, and all startup files are read, the first file to be edited is read in (or a temporary file is created). Then, any commands specified using the .b \-c option are executed, in the context of that file. .SH 1 "Recovery" .pp There is no recovery program for .EV nex nvi , nor does .EV nex nvi run setuid. Recovery files are created readable and writable by the owner only. Users may recover any file which they can read, and the superuser may recover any edit session. .pp Edit sessions are backed by files in the directory named by the .OP recdir option (the directory .LI /var/tmp/vi.recover by default), and are named .QC vi.XXXXXX , where .QC XXXXXX is a number related to the process ID. When a file is first modified, a second recovery file containing an email message for the user is created, and is named .QC recover.XXXXXX , where, again, .QC XXXXXX is associated with the process ID. Both files are removed at the end of a normal edit session, but will remain if the edit session is abnormally terminated or the user runs the .CO ex .CO preserve command. .pp The .OP recdir option may be set in either the user's or system's startup information, changing the recovery directory. (Note, however, that if a memory based file system is used as the backup directory, each system reboot will delete all of the recovery files! The same caution applies to directories such as .LI /tmp which are cleared of their contents by a system reboot, or .LI /usr/tmp which is periodically cleared of old files on many systems.) .pp The recovery directory should be owned by root, or at least by a pseudo-user. In addition, if directory .QQ sticky-bit semantics are available, the directory should have the sticky-bit set so that files may only be removed by their owners. The recovery directory must be read, write, and executable by any user, i.e. mode 1777. .pp If the recovery directory does not exist, .EV ex vi will attempt to create it. This can result in the recovery directory being owned by a normal user, which means that that user will be able to remove other user's recovery and backup files. This is annoying, but is not a security issue as the user cannot otherwise access or modify the files. .pp The recovery file has all of the necessary information in it to enable the user to recover the edit session. In addition, it has all of the necessary email headers for .XR sendmail 8 . When the system is rebooted, all of the files in .LI /var/tmp/vi.recover named .QC recover.XXXXXX should be sent to their owners, by email, using the .b \-t option of .CO sendmail (or a similar mechanism in other mailers). If .EV ex vi receives a hangup (SIGHUP) signal, or the user executes the .CO ex .CO preserve command, .EV ex vi will automatically email the recovery information to the user. .pp If your system does not have the .CO sendmail utility (or a mailer program which supports its interface) the source file .LI nvi/common/recover.c will have to be modified to use your local mail delivery programs. Note, if .EV nex nvi is changed to use another mailer, it is important to remember that the owner of the file given to the mailer is the .EV nex nvi user, so nothing in the file should be trusted as it may have been modified in an effort to compromise the system. .pp Finally, the owner execute bit is set on backup files when they are created, and unset when they are first modified, e.g. backup files that have no associated email recovery file will have this bit set. (There is also a small window where empty files can be created and not yet have this bit set. This is due to the method in which the files are created.) Such files should be deleted when the system reboots. .pp A simple way to do this cleanup is to run the Bourne shell script .CO recover , from your .LI /etc/rc.local (or other system startup) file. The script should work with the historic Bourne shell, a POSIX 1003.2 shell or the Korn shell. The .CO recover script is installed as part of the .EV nex nvi installation process. .pp Consult the manual page for details on recovering preserved or aborted editing sessions. .SH 1 "Sizing the Screen" .pp The size of the screen can be set in a number of ways. .EV Ex vi takes the following steps until values are obtained for both the number of rows and number of columns in the screen. .np If the environmental variable .LI LINES exists, it is used to specify the number of rows in the screen. .np If the environmental variable .LI COLUMNS exists, it is used to specify the number of columns in the screen. .np The TIOCGWINSZ .XR ioctl 2 is attempted on the standard error file descriptor. .np The termcap entry (or terminfo entry on System V machines) is checked for the .QQ li entry (rows) and the .QQ co entry (columns). .np The number of rows is set to 24, and the number of columns is set to 80. .pp If a window change size signal (SIGWINCH) is received, the new window size is retrieved using the TIOCGWINSZ .XR ioctl 2 call, and all other information is ignored. .SH 1 "Character Display" .pp In both .CO ex and .CO vi printable characters as defined by .XR isprint 3 are displayed using the local character set. .pp Non-printable characters, for which .XR iscntrl 3 returns true, and which are less than octal \e040, are displayed as the string .QT ^ , where .LI is the character that is the original character's value offset from the .QT @ character. For example, the octal character \e001 is displayed as .QT ^A . If .XR iscntrl 3 returns true for the octal character \e177, it is displayed as the string .QT ^? . All other characters are displayed as either hexadecimal values, in the form .QT "0x ... 0x" , or as octal values, in the form .QT "\e ... \e" . The display of unknown characters is based on the value of the .OP octal option. .pp In .CO vi command mode, the cursor is always positioned on the last column of characters which take up more than one column on the screen. In .CO vi text input mode, the cursor is positioned on the first column of characters which take up more than one column on the screen. .SH 1 "Multiple Screens" .pp .CO Nvi supports multiple screens by dividing the window into regions. It also supports stacks of screens by permitting the user to change the set of screens that are currently displayed. .pp The .CO Edit , .CO Ex , .CO Fg , .CO Next , .CO Previous , .CO Tag and .CO Visual (in .CO vi mode) commands divide the current screen into two regions of approximately equal size and then perform their usual action in a new screen area. If the cursor is in the lower half of the screen, the screen will split up, i.e. the new screen will be above the old one. If the cursor is in the upper half of the screen, the new screen will be below the old one. .pp When more than one screen is editing a file, changes in any screen are reflected in all other screens editing the same file. Exiting a screen without saving any changes (or explicitly discarding them) is permitted until the last screen editing the file is exited, at which time the changes must be saved or discarded. .pp The .CO resize command permits resizing of individual screens. Screens may be grown, shrunk or set to an absolute number of rows. .pp The .CO ^W command is used to switch between screens. Each .CO ^W moves to the next lower screen in the window, or to the first screen in the window if there are no lower screens. .pp The .CO bg command .QQ backgrounds the current screen. The screen disappears from the window, and the rows it occupied are taken over by a neighboring screen. It is an error to attempt to background the only screen in the window. .pp The .CO "display screens" command displays the names of the files associated with the current backgrounded screens in the window. .pp The .CO "fg [file]" command moves the specified screen from the list of backgrounded screens to the foreground. If no file argument is specified, the first screen on the list is foregrounded. By default, foregrounding consists of backgrounding the current screen, and replacing its space in the window with the foregrounded screen. .pp Capitalizing the first letter of the command, i.e. .CO Fg , will foreground the backgrounded screen in a new screen instead of swapping it with the current screen. .pp If the last foregrounded screen in the window is exited, and there are backgrounded screens, the first screen on the list of backgrounded screens takes over the window. .SH 1 "Tags, Tag Stacks, and Cscope" .pp .CO Nvi supports the historic .CO vi tag command .CO , and the historic .CO ex tag command .CO tag . These commands change the current file context to a new location, based on information found in the .LI tags files. If you are unfamiliar with these commands, you should review their description in the .CO ex and .CO vi commands section of this manual. For additional information on tags files, see the discussion of the .OP tags edit option and the system .XR ctags 1 manual page. .pp In addition, .CO nvi supports the notion of .QQ "tags stacks" , using the .CO command. The .CO command returns the user to the previous context, i.e., the last place from which a .CO or .CO "tag" command was entered. These three commands provide the basic functionality which allows you to use .CO vi to review source code in a structured manner. .pp .CO Nvi also provides two other basic .CO ex commands for tag support: .CO tagpop and .CO tagtop . The .CO tagpop command is identical to the .CO command, with the additional functionality that you may specify that modifications to the current file are to be discarded. This cannot be done using the .CO command. The .CO tagtop command discards all of the contexts that have been pushed onto the tag stack, returning to the context from which the first .CO or .CO tag command was entered. .pp The historic .XR ctags 1 tags file format supports only a single location per tag, normally the function declaration or structure or string definition. More sophisticated source code tools often provide multiple locations per tag, e.g., a list of the places from which a function is called or a string definition is used. An example of this functionality is the System V source code tool, .CO cscope . .sp .CO Cscope creates a database of information on source code files, and supports a query language for that information as described in the .XR cscope 1 manual page. .CO Nvi contains an interface to the .CO cscope query language which permits you to query .CO cscope and then sequentially step through the locations in the sources files which .CO cscope returns. There are two .CO nvi commands which support this ability to step through multiple locations. They are the .CO ex commands .CO tagnext and .CO tagprev . The .CO tagnext command moves to the next location for the current tag. The .CO tagprev command moves to the previous location for the current tag. (See the .CO tagnext and .CO tagprev command discussion in the .CO ex commands section of this manual for more information.) At any time during this sequential walk, you may use the .CO , .CO tag or .CO cscope commands to move to a new tag context, and then use the .CO or .CO tagpop commands to return and continue stepping through the locations for this tag. This is similar to the previous model of a simple tag stack, except that each entry in the tag stack may have more than one file context that is of interest. .pp Although there is no widely distributed version of .XR ctags 1 that creates tags files with multiple locations per tag, .CO nvi has been written to understand the obvious extension to the historic tags file format, i.e., more than a single line in the tags file with the same initial tag name. If you wish to extend your .CO ctags implementation or other tool with which you build tags files, this extension should be simple and will require no changes to .CO nvi . .pp The .CO nvi and .CO cscope interface is based on the new .CO ex command .CO cscope , which has five subcommands: .CO add , .CO find , .CO help , .CO kill and .CO reset . The subcommand .CO find itself has eight subcommands: .CO \&c , .CO \&d , .CO \&e , .CO \&f , .CO \&g , .CO \&i , .CO \&s and .CO \&t . .pp .IP "cs[cope] a[dd] file" The .CO add command attaches to the specified .CO cscope database. The file name is expanded using the standard filename expansions. If .CO file is a directory, the file .QQ cscope.out in that directory is used as the database. .pp After .CO nvi attaches to a new database, all subsequent .CO cscope queries will be asked of that database. The result of any single query is the collection of response to the query from all of the attached databases. .sp If the .QQ CSCOPE_DIRS environmental variable is set when .CO nvi is run, it is expected to be a or -separated list of .CO cscope databases or directories containing .CO cscope databases, to which the user wishes to attach. .IP ":cs[cope] f[ind] c|d|e|f|g|i|s|t buffer|pattern" The .CO find command is the .CO cscope query command for .CO nvi . For this command, .CO nvi queries all attached .CO cscope databases for the pattern. If the pattern is a double-quote character followed by a valid buffer name (e.g., .LI """" ), then the contents of the named buffer are used as the pattern. Otherwise, the pattern is a Regular Expression. .sp The .CO find command pushes the current location onto the tags stack, and switches to the first location resulting from the query, if the query returned at least one result. .sp File names returned by the .CO cscope query, if not absolute paths, are searched for relative to the directory where the .CO cscope database is located. In addition, if the file .QQ cscope.tpath appears in the same directory as the .CO cscope database, it is expected to contain a colon-separated list of directory names where files referenced by its associated .CO cscope database may be found. .sp The .CO find subcommand is one of the following: .SS .SP \&c Find callers of the name. .SP \&d Find all function calls made from name. .SP \&e Find pattern. .SP \&f Find files with name as substring. .SP \&g Find definition of name. .SP \&i Find files #including name. .SP \&s Find all uses of name. .SP \&t Find assignments to name. .SE .IP ":cs[cope] h[elp] [command]" List the .CO cscope commands, or optionally list usage help for any single .CO cscope command. .IP ":display c[onnections]" Display the list of .CO cscope databases to which .CO nvi is currently connected. .IP ":cs[cope] k[ill] #" Disconnect from a specific .CO cscope database. The connection number is the one displayed by the .CO ex .CO "display connections" command. .IP ":cs[cope] r[eset]" Disconnect from all attached .CO cscope databases. .pp Cscope is not freely redistributable software, but is fairly inexpensive and easily available. To purchase a copy of .CO cscope , see http://www.att.com/ssg/products/toolchest.html. .SH 1 "Regular Expressions and Replacement Strings" .pp Regular expressions are used in line addresses, as the first part of the .CO ex .CO substitute , .CO global , and .CO v commands, and in search patterns. .pp The regular expressions supported by .EV ex vi are, by default, the Basic Regular Expressions (BRE's) described in the IEEE POSIX Standard 1003.2. The .OP extended option causes all regular expressions to be interpreted as the Extended Regular Expressions (ERE's) described by the same standard. (See .XR re_format 7 for more information.) Generally speaking, BRE's are the Regular Expressions found in .XR ed 1 and .XR grep 1 , and ERE's are the Regular Expressions found in .XR egrep 1 . .pp The following is not intended to provide a description of Regular Expressions. The information here only describes strings and characters which have special meanings in the .EV ex vi version of RE's, or options which change the meanings of characters that normally have special meanings in RE's. .np An empty RE (e.g. .QT // or .QT ?? is equivalent to the last RE used. .np The construct .QT \e< matches the beginning of a word. .np The construct .QT \e> matches the end of a word. .np The character .QT ~ matches the replacement part of the last .CO substitute command. .pp When the .OP magic option is .i not set, the only characters with special meanings are a .QT ^ character at the beginning of an RE, a .QT $ character at the end of an RE, and the escaping character .QT \e . The characters .QT \&. , .QT * , .QT [ and .QT ~ are treated as ordinary characters unless preceded by a .QT \e ; when preceded by a .QT \e they regain their special meaning. .pp Replacement strings are the second part of a .CO substitute command. .pp The character .QT & (or .QT \e& if the .OP magic option is .i not set) in the replacement string stands for the text matched by the RE that is being replaced. The character .QT ~ (or .QT \e~ if the .OP magic option is .i not set) stands for the replacement part of the previous .CO substitute command. It is only valid after a .CO substitute command has been performed. .pp The string .QT \e# , where .QT # is an integer value from 1 to 9, stands for the text matched by the portion of the RE enclosed in the .QT # 'th set of escaped parentheses, e.g. .QT \e( and .QT \e) . For example, .QT "s/abc\e(.*\e)def/\e1/" deletes the strings .QT abc and .QT def from the matched pattern. .pp The strings .QT \el , .QT \eu , .QT \eL and .QT \eU can be used to modify the case of elements in the replacement string. The string .QT \el causes the next character to be converted to lowercase; the string .QT \eu behaves similarly, but converts to uppercase (e.g. .LI s/abc/\eU&/ replaces the string .LI abc with .LI ABC ). The string .QT \eL causes characters up to the end of the string or the next occurrence of the strings .QT \ee or .QT \eE to be converted to lowercase; the string .QT \eU behaves similarly, but converts to uppercase. .pp If the entire replacement pattern is .QT % , then the last replacement pattern is used again. .pp In .CO vi , inserting a .LI into the replacement string will cause the matched line to be split into two lines at that point. (The .LI will be discarded.) .SH 1 "Scripting Languages" .pp The .CO nvi editor currently supports two scripting languages, Tcl/Tk and Perl. (Note that Perl4 isn't sufficient, and that the Perl5 used must be version 5.002 or later. See the .QB "Building Nvi" section for more information. .pp The scripting language interface is still being worked on, therefore the following information is probably incomplete, probably wrong in cases, and likely to change. See the .LI perl_api and .LI tcl_api source directories for more information. As a quick reference, the following function calls are provided for both the Perl and Tcl interfaces. The Perl interface uses a slightly different naming convention, e.g. ``viFindScreen'' is named ``VI::FindScreen''. .IP "viFindScreen file" Return the .LI "screenId" associated with .LI file . .IP "viAppendLine screenId lineNumber text" Append .LI text as a new line after line number .LI lineNumber , in the screen .LI screenId . .IP "viDelLine screenId lineNum" Delete the line .LI lineNumber from the screen .LI screenId . .IP "viGetLine screenId lineNumber" Return the line .LI lineNumber from the screen .LI screenId . .IP "viInsertLine screenId lineNumber text" Insert .LI text as a new line before line number .LI lineNumber in the screen .LI screenId . .IP "viLastLine screenId" Return the line number of the last line in the screen .LI screenId . .IP "viSetLine screenId lineNumber text" Change the line .LI lineNumber in the screen .LI screenId to match the specified .LI text . .IP "viGetMark screenId mark" Return the current line and column for the specified .LI mark from the screen .LI screenId . .IP "viSetMark screenId mark line column" Set the specified .LI mark to be at line .LI line , column .LI column , in the screen .LI screenId . .IP "viGetCursor screenId" Return the current line and column for the cursor in the screen .LI screenId . .IP "viSetCursor screenId line column" Set the cursor in the screen .LI screenId to the specified .LI line and .LI column . .IP "viMsg screenId text" Display the specified .LI text as a vi message in the screen .LI screenId . .IP "viNewScreen screenId [file]" Create a new screen. .IP "viEndScreen screenId" Exit the screen .LI screenId . .IP "viSwitchScreen screenId screenId" Switch from the screen .LI screenId to the screen .LI screenId . .IP "viMapKey screenId key tclproc" Map the specified .LI key in the screen .LI screenId to the Tcl procedure .LI tclproc . .IP "viUnmMapKey screenId key" Unmap the specified .LI key in the screen .LI screenId .IP "viGetOpt screenId option" Return the value of the specified .LI option from the screen .LI screenId . .IP "viSetOpt screenId command" Set one or more options in the screen .LI screenId . .SH 1 "General Editor Description" .pp When .CO ex or .CO vi are executed, the text of a file is read (or a temporary file is created), and then all editing changes happen within the context of the copy of the file. .i "No changes affect the actual file until the file is written out" , either using a write command or another command which is affected by the .OP autowrite option. .pp All files are locked (using the .XR flock 2 or .XR fcntl 2 interfaces) during the edit session, to avoid inadvertently making modifications to multiple copies of the file. If a lock cannot be obtained for a file because it is locked by another process, the edit session is read-only (as if the .OP readonly option or the .b \-R flag had been specified). If a lock cannot be obtained for other reasons, the edit session will continue, but the file status information (see the .CO command) will reflect this fact. .pp Both .CO ex and .CO vi are modeful editors, i.e. they have two modes, .QQ command mode and .QQ "text input" mode. The former is intended to permit you to enter commands which modifies already existing text. The latter is intended to permit you to enter new text. When .CO ex first starts running, it is in command mode, and usually displays a prompt (see the .OP prompt option for more information). The prompt is a single colon .PQ : character. There are three commands that switch .CO ex into text input mode: .CO append , .CO change and .CO insert . Once in input mode, entering a line containing only a single period .PQ \&. ends text input mode and returns to command mode, where the prompt is redisplayed. .pp When .CO vi first starts running, it is in command mode as well. There are eleven commands that switch .CO vi into text input mode: .CO A , .CO a , .CO C , .CO c , .CO I , .CO i , .CO O , .CO o , .CO R , .CO S and .CO s . Once in input mode, entering an .LI character ends text input mode and returns to command mode. .pp .EV Ex vi present three different interfaces to editing a file. .CO Ex presents a line oriented interface. .CO Vi presents a full screen display oriented interface, also known as .QQ "visual mode" . In addition, there is a third mode, .QQ "open mode" , which is line oriented, but supports cursor movement and editing within the displayed line, similarly to visual mode. Open mode is not yet implemented in .CO nvi . .pp The following words have special meanings in both the .CO ex and .CO vi command descriptions: .KY .IP The interrupt character is used to interrupt the current operation. Normally .LI , whatever character is set for the current terminal is used. .KY "" .IP "" The literal next character is used to escape the subsequent character from any special meaning. This character is always .LI . If the terminal is not set up to do XON/XOFF flow control, then .LI is used to mean literal next as well. .KY "current pathname" .IP "current pathname" The pathname of the file currently being edited by vi. When the percent character .PQ % appears in a file name entered as part of an .CO ex command argument, it is replaced by the current pathname. (The .QT % character can be escaped by preceding it with a backslash.) .KY "alternate pathname" .IP "alternate pathname" The name of the last file name mentioned in an .CO ex command, or, the previous current pathname if the last file mentioned becomes the current file. When the hash mark character .PQ # appears in a file name entered as part of an .CO ex command argument, it is replaced by the alternate pathname. (The .QT # character can be escaped by preceding it with a backslash.) .KY buffer .IP buffer One of a number of named areas for saving copies of text. Commands that change or delete text can save the changed or deleted text into a specific buffer, for later use, if the command allows it (i.e. the .CO ex .CO change command cannot save the changed text in a named buffer). Buffers are named with a single character, preceded by a double quote, e.g. .LI """" in .CO vi and without the double quote, e.g. .LI , in .CO ex . (The double quote isn't necessary for .CO ex because buffers names are denoted by their position in the command line.) Historic implementations of .EV ex vi limited .LI to the alphanumeric characters; .EV nex nvi permits the use of any character without another meaning in the position where a buffer name is expected. .sp Buffers named by uppercase characters are the same as buffers named by lowercase characters, e.g. the buffer named by the English character .QT A is the same as the buffer named by the character .QT a , with the exception that, if the buffer contents are being changed (as with a text deletion or .CO vi .CO change command), the text is .i appended to the buffer, instead of replacing the current contents. .sp The buffers named by the numeric characters (in English, .QT 1 through .QT 9 ), are special. If a region of text including characters from more than one line, or a single line of text specified by using a line-oriented motion, is changed or deleted in the file using the .CO vi .CO change or .CO delete commands, a copy of the text is placed into the numeric buffer .QT 1 , regardless of the user specifying another buffer in which to save it. In addition, there are a few commands which, when used as a .LI motion with the .CO vi .CO change and .CO delete commands, .i always copy the specified region of text into the numeric buffers regardless of the region including characters from more than one line. These commands are: .sp .ne 3v .ft C .TS r r r r. % ( ) ` / ? N n { } .TE .ft R .sp Before this copy is done, the previous contents of buffer .QT 1 are moved into buffer .QT 2 , .QT 2 into buffer .QT 3 , and so on. The contents of buffer .QT 9 are discarded. In .CO vi , text may be explicitly stored into the numeric buffers. In this case, the buffer rotation described above occurs before the replacement of the buffer's contents. The numeric buffers are only available in .LI visual and .LI open modes, and are not accessible by .CO ex in any way, although changed and deleted text is still stored there while in .CO ex mode. .sp When a .CO vi command synopsis shows both a .LI [buffer] and a .LI [count] , they may be presented in any order. .sp Finally, all buffers are either .QQ line or .QQ character oriented. All .CO ex commands which store text into buffers are line oriented. Some .CO vi commands which store text into buffers are line oriented, and some are character oriented; the description for each applicable .CO vi command notes whether text copied into buffers using the command is line or character oriented. In addition, the .CO vi command .CO "display buffers" displays the current orientation for each buffer. Generally, the only importance attached to this orientation is that if the buffer is subsequently inserted into the text, line oriented buffers create new lines for each of the lines they contain, and character oriented buffers create new lines for any lines .i other than the first and last lines they contain. The first and last lines are inserted into the text at the current cursor position, becoming part of the current line. If there is more than one line in the buffer, however, the current line itself will be split. .KY "unnamed buffer" .IP "unnamed buffer" The unnamed buffer is a text storage area which is used by commands that use or operate on a buffer when no buffer is specified by the user. If the command stores text into a buffer, the text is stored into the unnamed buffer even if a buffer is also specified by the user. It is not possible to append text to the unnamed buffer. If text is appended to a named buffer, the named buffer contains both the old and new text, while the unnamed buffer contains only the new text. There is no way to explicitly reference the unnamed buffer. .sp Historically, the contents of the unnamed buffer were discarded by many different commands, even ones that didn't store text into it. .EV Nex nvi never discards the contents of the unnamed buffer until new text replaces them. .KY whitespace .IP whitespace The characters and . .KY "" .IP "" The character represented by an ASCII .LI . This character is almost always treated identically to a .LI character, but differs in that it can be escaped into the file text or into a command. .KY .IP The character represented by an ASCII .LI . This character is almost always treated identically to a .LI character, but differs in that it cannot be escaped into the file text or into a command. .oh 'Vi/Ex Reference (Vi Commands)''USD:13-%' .eh 'USD:13-%''Vi/Ex Reference (Vi Commands)' .so vi.cmd.roff .oh 'Vi/Ex Reference''USD:13-%' .eh 'USD:13-%''Vi/Ex Reference' .SH 1 "Ex Addressing" .pp Addressing in .CO ex (and when .CO ex commands are executed from .CO vi ) relates to the current line. In general, the current line is the last line affected by a command. The exact effect on the current line is discussed under the description of each command. When the file contains no lines, the current line is zero. .pp Addresses are constructed by one or more of the following methods: .np The address .QT \&. refers to the current line. .np The address .QT $ refers to the last line of the file. .np The address .QT N , where .LI N is a positive number, refers to the N-th line of the file. .np The address .QT ' or .QT ` refers to the line marked with the name .LI . (See the .CO k or .CO m commands for more information on how to mark lines.) .np A regular expression (RE) enclosed by slashes .PQ / is an address, and it refers to the first line found by searching forward from the line .i after the current line toward the end of the file, and stopping at the first line containing a string matching the RE. (The trailing slash can be omitted at the end of the command line.) .sp If no RE is specified, i.e. the pattern is .QT // , the last RE used in any command is used in the search. .sp If the .OP extended option is set, the RE is handled as an extended RE, not a basic RE. If the .OP wrapscan option is set, the search wraps around to the beginning of the file and continues up to and including the current line, so that the entire file is searched. .sp The form .QT \e/ is accepted for historic reasons, and is identical to .QT // . .np An RE enclosed in question marks .PQ ? addresses the first line found by searching backward from the line .i preceding the current line, toward the beginning of the file and stopping at the first line containing a string matching the RE. (The trailing question mark can be omitted at the end of a command line.) .sp If no RE is specified, i.e. the pattern is .QT ?? , the last RE used in any command is used in the search. .sp If the .OP extended option is set, the RE is handled as an extended RE, not a basic RE. If the .OP wrapscan option is set, the search wraps around from the beginning of the file to the end of the file and continues up to and including the current line, so that the entire file is searched. .sp The form .QT \e? is accepted for historic reasons, and is identical to .QT ?? . .np An address followed by a plus sign .PQ + or a minus sign .PQ - followed by a number is an offset address and refers to the address plus (or minus) the indicated number of lines. If the address is omitted, the addition or subtraction is done with respect to the current line. .np An address of .QT + or .QT \- followed by a number is an offset from the current line. For example, .QT \-5 is the same as .QT \&.\-5 . .np An address ending with .QT + or .QT - has 1 added to or subtracted from the address, respectively. As a consequence of this rule and of the previous rule, the address .QT \- refers to the line preceding the current line. Moreover, trailing .QT + and .QT \- characters have a cumulative effect. For example, .QT ++\-++ refers to the current line plus 3. .np A percent sign .PQ % is equivalent to the address range .QT 1,$ . .pp .CO Ex commands require zero, one, or two addresses. It is an error to specify an address to a command which requires zero addresses. .pp If the user provides more than the expected number of addresses to any .CO ex command, the first addresses specified are discarded. For example, .QT 1,2,3,5 print prints lines 3 through 5, because the .CO print command only takes two addresses. .pp The addresses in a range are separated from each other by a comma .PQ , or a semicolon .PQ ; . In the latter case, the current line .PQ \&. is set to the first address, and only then is the second address calculated. This feature can be used to determine the starting line for forward and backward searches (see rules (5) and (6) above). The second address of any two-address sequence corresponds to a line that follows, in the file, the line corresponding to the first address. The first address must be less than or equal to the second address. The first address must be greater than or equal to the first line of the file, and the last address must be less than or equal to the last line of the file. .oh 'Vi/Ex Reference (Ex Commands)''USD:13-%' .eh 'USD:13-%''Vi/Ex Reference (Ex Commands)' .so ex.cmd.roff .oh 'Vi/Ex Reference (Options)''USD:13-%' .eh 'USD:13-%''Vi/Ex Reference (Options)' .so set.opt.roff .oh 'Vi/Ex Reference''USD:13-%' .eh 'USD:13-%''Vi/Ex Reference' .bp .SH 1 Index .lp .2c +0.5i 3 .ta \n($luR .nf .so index.so .fi .\" Force the TOC to an odd page, in case it's a duplex printer. .if o .bp .bp 3 .1c .ce 1 \fB\s+2Table of Contents\s0\fP .sp .xp vigor-0.016.orig/docs/USD.doc/vi.man/0040755000076400007640000000000007103707243015613 5ustar cjw44cjw44vigor-0.016.orig/docs/USD.doc/vi.man/Makefile0100644000076400007640000000032507103707243017250 0ustar cjw44cjw44# @(#)Makefile 8.7 (Berkeley) 8/18/96 ROFF= groff all: vi.0 vi.0.ps vi.0: vi.1 ${ROFF} -man -Tascii < vi.1 > $@ chmod 444 $@ vi.0.ps: vi.1 ${ROFF} -man < vi.1 > $@ chmod 444 $@ clean: rm -f vi.0 vi.0.ps vigor-0.016.orig/docs/USD.doc/vi.man/vi.10100644000076400007640000010176007103707243016315 0ustar cjw44cjw44.\" Copyright (c) 1994 .\" The Regents of the University of California. All rights reserved. .\" Copyright (c) 1994, 1995, 1996 .\" Keith Bostic. All rights reserved. .\" .\" This document may not be republished without written permission from .\" Keith Bostic. .\" .\" See the LICENSE file for redistribution information. .\" .\" @(#)vi.1 8.51 (Berkeley) 10/10/96 .\" .TH VI 1 "October 10, 1996" .UC .SH NAME ex, vi, view \- text editors .SH SYNOPSIS .B ex [\c .B -eFRrSsv\c ] [\c .BI -c " cmd"\c ] [\c .BI -t " tag"\c ] [\c .BI -w " size"\c ] [file ...] .br .B vi [\c .B -eFlRrSv\c ] [\c .BI -c " cmd"\c ] [\c .BI -t " tag"\c ] [\c .BI -w " size"\c ] [file ...] .br .B view [\c .B -eFRrSv\c ] [\c .BI -c " cmd"\c ] [\c .BI -t " tag"\c ] [\c .BI -w " size"\c ] [file ...] .SH LICENSE The vi program is freely redistributable. You are welcome to copy, modify and share it with others under the conditions listed in the LICENSE file. If any company (not individual!) finds vi sufficiently useful that you would have purchased it, or if any company wishes to redistribute it, contributions to the authors would be appreciated. .SH DESCRIPTION .I \&Vi is a screen oriented text editor. .I \&Ex is a line-oriented text editor. .I \&Ex and .I \&vi are different interfaces to the same program, and it is possible to switch back and forth during an edit session. .I View is the equivalent of using the .B \-R (read-only) option of .IR \&vi . .PP This manual page is the one provided with the .I nex/nvi versions of the .I ex/vi text editors. .I Nex/nvi are intended as bug-for-bug compatible replacements for the original Fourth Berkeley Software Distribution (4BSD) .I \&ex and .I \&vi programs. For the rest of this manual page, .I nex/nvi is used only when it's necessary to distinguish it from the historic implementations of .IR ex/vi . .PP This manual page is intended for users already familiar with .IR ex/vi . Anyone else should almost certainly read a good tutorial on the editor before this manual page. If you're in an unfamiliar environment, and you absolutely have to get work done immediately, read the section after the options description, entitled ``Fast Startup''. It's probably enough to get you going. .PP The following options are available: .TP .B \-c Execute .B cmd immediately after starting the edit session. Particularly useful for initial positioning in the file, however .B cmd is not limited to positioning commands. This is the POSIX 1003.2 interface for the historic ``+cmd'' syntax. .I Nex/nvi supports both the old and new syntax. .TP .B \-e Start editing in ex mode, as if the command name were .IR \&ex . .TP .B \-F Don't copy the entire file when first starting to edit. (The default is to make a copy in case someone else modifies the file during your edit session.) .TP .B \-l Start editing with the lisp and showmatch options set. .TP .B \-R Start editing in read-only mode, as if the command name was .IR view , or the .B readonly option was set. .TP .B \-r Recover the specified files, or, if no files are specified, list the files that could be recovered. If no recoverable files by the specified name exist, the file is edited as if the .B \-r option had not been specified. .TP .B \-S Run with the .B secure edit option set, disallowing all access to external programs. .TP .B \-s Enter batch mode; applicable only to .I \&ex edit sessions. Batch mode is useful when running .I \&ex scripts. Prompts, informative messages and other user oriented message are turned off, and no startup files or environmental variables are read. This is the POSIX 1003.2 interface for the historic ``\-'' argument. .I \&Nex/nvi supports both the old and new syntax. .TP .B \-t Start editing at the specified tag. (See .IR ctags (1)). .TP .B \-w Set the initial window size to the specified number of lines. .TP .B \-v Start editing in vi mode, as if the command name was .I \&vi or .IR view . .PP Command input for .I ex/vi is read from the standard input. In the .I \&vi interface, it is an error if standard input is not a terminal. In the .I \&ex interface, if standard input is not a terminal, .I \&ex will read commands from it regardless, however, the session will be a batch mode session, exactly as if the .B \-s option had been specified. .PP .I Ex/vi exits 0 on success, and greater than 0 if an error occurs. .SH FAST STARTUP This section will tell you the minimum amount that you need to do simple editing tasks using .IR \&vi . If you've never used any screen editor before, you're likely to have problems even with this simple introduction. In that case you should find someone that already knows .I \&vi and have them walk you through this section. .PP .I \&Vi is a screen editor. This means that it takes up almost the entire screen, displaying part of the file on each screen line, except for the last line of the screen. The last line of the screen is used for you to give commands to .IR \&vi , and for .I \&vi to give information to you. .PP The other fact that you need to understand is that .I \&vi is a modeful editor, i.e. you are either entering text or you are executing commands, and you have to be in the right mode to do one or the other. You will be in command mode when you first start editing a file. There are commands that switch you into input mode. There is only one key that takes you out of input mode, and that is the key. (Key names are written using less-than and greater-than signs, e.g. means the ``escape'' key, usually labeled ``esc'' on your terminal's keyboard.) If you're ever confused as to which mode you're in, keep entering the key until .I \&vi beeps at you. (Generally, .I \&vi will beep at you if you try and do something that's not allowed. It will also display error messages.) .PP To start editing a file, enter the command ``vi file_name''. The command you should enter as soon as you start editing is ``:set verbose showmode''. This will make the editor give you verbose error messages and display the current mode at the bottom of the screen. .PP The commands to move around the file are: .TP .B h Move the cursor left one character. .TP .B j Move the cursor down one line. .TP .B k Move the cursor up one line. .TP .B l Move the cursor right one character. .TP .B The cursor arrow keys should work, too. .TP .B /text Search for the string ``text'' in the file, and move the cursor to its first character. .PP The commands to enter new text are: .TP .B a Append new text, .I after the cursor. .TP .B i Insert new text, .I before the cursor. .TP .B o Open a new line below the line the cursor is on, and start entering text. .TP .B O Open a new line above the line the cursor is on, and start entering text. .TP .B Once you've entered input mode using the one of the .BR \&a , .BR \&i , .BR \&O or .B \&o commands, use .B to quit entering text and return to command mode. .PP The commands to copy text are: .TP .B yy Copy the line the cursor is on. .TP .B p Append the copied line after the line the cursor is on. .PP The commands to delete text are: .TP .B dd Delete the line the cursor is on. .TP .B x Delete the character the cursor is on. .PP The commands to write the file are: .TP .B :w Write the file back to the file with the name that you originally used as an argument on the .I \&vi command line. .TP .B ":w file_name" Write the file back to the file with the name ``file_name''. .PP The commands to quit editing and exit the editor are: .TP .B :q Quit editing and leave vi (if you've modified the file, but not saved your changes, .I \&vi will refuse to quit). .TP .B :q! Quit, discarding any modifications that you may have made. .PP One final caution. Unusual characters can take up more than one column on the screen, and long lines can take up more than a single screen line. The above commands work on ``physical'' characters and lines, i.e. they affect the entire line no matter how many screen lines it takes up and the entire character no matter how many screen columns it takes up. .SH VI COMMANDS The following section describes the commands available in the command mode of the .I \&vi editor. In each entry below, the tag line is a usage synopsis for the command character. .PP .TP .B "[count] " Search forward .I count times for the current word. .TP .B "[count] " Page backwards .I count screens. .TP .B "[count] " Scroll forward .I count lines. .TP .B "[count] " Scroll forward .I count lines, leaving the current line and column as is, if possible. .TP .B "[count] " Page forward .I count screens. .TP .B "" Display the file information. .TP .B "" .TP .B "[count] h" Move the cursor back .I count characters in the current line. .TP .B "[count] " .TP .B "[count] " .TP .B "[count] j" Move the cursor down .I count lines without changing the current column. .TP .B "" .TP .B "" Repaint the screen. .TP .B "[count] " .TP .B "[count] +" Move the cursor down .I count lines to the first nonblank character of that line. .TP .B "[count] " .TP .B "[count] k" Move the cursor up .I count lines, without changing the current column. .TP .B "" Return to the most recent tag context. .TP .B "" Scroll backwards .I count lines. .TP .B "" Switch to the next lower screen in the window, or, to the first screen if there are no lower screens in the window. .TP .B "" Scroll backwards .I count lines, leaving the current line and column as is, if possible. .TP .B "" Suspend the current editor session. .TP .B "" Execute .I \&ex commands or cancel partial commands. .TP .B "" Push a tag reference onto the tag stack. .TP .B "" Switch to the most recently edited file. .TP .B "[count] " .TP .B "[count] l" Move the cursor forward .I count characters without changing the current line. .TP .B "[count] ! motion shell-argument(s)" Replace text with results from a shell command. .TP .B "[count] # #|+|-" Increment or decrement the cursor number. .TP .B "[count] $" Move the cursor to the end of a line. .TP .B "%" Move to the matching character. .TP .B "&" Repeat the previous substitution command on the current line. .TP .B "'" .TP .B "`" Return to a context marked by the character .IR . .TP .B "[count] (" Back up .I count sentences. .TP .B "[count] )" Move forward .I count sentences. .TP .B "[count] ," Reverse find character .I count times. .TP .B "[count] -" Move to first nonblank of the previous line, .I count times. .TP .B "[count] ." Repeat the last .I \&vi command that modified text. .TP .B "/RE" .TP .B "/RE/ [offset]" .TP .B "?RE" .TP .B "?RE? [offset]" .TP .B "N" .TP .B "n" Search forward or backward for a regular expression. .TP .B "0" Move to the first character in the current line. .TP .B ":" Execute an ex command. .TP .B "[count] ;" Repeat the last character find .I count times. .TP .B "[count] < motion" .TP .B "[count] > motion" Shift lines left or right. .TP .B "@ buffer" Execute a named buffer. .TP .B "[count] A" Enter input mode, appending the text after the end of the line. .TP .B "[count] B" Move backwards .I count bigwords. .TP .B "[buffer] [count] C" Change text from the current position to the end-of-line. .TP .B "[buffer] D" Delete text from the current position to the end-of-line. .TP .B "[count] E" Move forward .I count end-of-bigwords. .TP .B "[count] F " Search .I count times backward through the current line for .IR . .TP .B "[count] G" Move to line .IR count , or the last line of the file if .I count not specified. .TP .B "[count] H" Move to the screen line .I "count - 1" lines below the top of the screen. .TP .B "[count] I" Enter input mode, inserting the text at the beginning of the line. .TP .B "[count] J" Join lines. .TP .B "[count] L" Move to the screen line .I "count - 1" lines above the bottom of the screen. .TP .B " M" Move to the screen line in the middle of the screen. .TP .B "[count] O" Enter input mode, appending text in a new line above the current line. .TP .B "[buffer] P" Insert text from a buffer. .TP .B "Q" Exit .I \&vi (or visual) mode and switch to .I \&ex mode. .TP .B "[count] R" Enter input mode, replacing the characters in the current line. .TP .B "[buffer] [count] S" Substitute .I count lines. .TP .B "[count] T " Search backwards, .I count times, through the current line for the character .I after the specified .IR . .TP .B "U" Restore the current line to its state before the cursor last moved to it. .TP .B "[count] W" Move forward .I count bigwords. .TP .B "[buffer] [count] X" Delete .I count characters before the cursor. .TP .B "[buffer] [count] Y" Copy (or ``yank'') .I count lines into the specified buffer. .TP .B "ZZ" Write the file and exit .IR \&vi . .TP .B "[count] [[" Back up .I count section boundaries. .TP .B "[count] ]]" Move forward .I count section boundaries. .TP .B "\&^" Move to first nonblank character on the current line. .TP .B "[count] _" Move down .I "count - 1" lines, to the first nonblank character. .TP .B "[count] a" Enter input mode, appending the text after the cursor. .TP .B "[count] b" Move backwards .I count words. .TP .B "[buffer] [count] c motion" Change a region of text. .TP .B "[buffer] [count] d motion" Delete a region of text. .TP .B "[count] e" Move forward .I count end-of-words. .TP .B "[count] f" Search forward, .I count times, through the rest of the current line for .IR . .TP .B "[count] i" Enter input mode, inserting the text before the cursor. .TP .B "m " Save the current context (line and column) as .IR . .TP .B "[count] o" Enter input mode, appending text in a new line under the current line. .TP .B "[buffer] p" Append text from a buffer. .TP .B "[count] r " Replace .I count characters. .TP .B "[buffer] [count] s" Substitute .I count characters in the current line starting with the current character. .TP .B "[count] t " Search forward, .I count times, through the current line for the character immediately .I before .IR . .TP .B "u" Undo the last change made to the file. .TP .B "[count] w" Move forward .I count words. .TP .B "[buffer] [count] x" Delete .I count characters. .TP .B "[buffer] [count] y motion" Copy (or ``yank'') a text region specified by the .I count and motion into a buffer. .TP .B "[count1] z [count2] -|.|+|^|" Redraw, optionally repositioning and resizing the screen. .TP .B "[count] {" Move backward .I count paragraphs. .TP .B "[count] |" Move to a specific .I column position on the current line. .TP .B "[count] }" Move forward .I count paragraphs. .TP .B "[count] ~" Reverse the case of the next .I count character(s). .TP .B "[count] ~ motion" Reverse the case of the characters in a text region specified by the .I count and .IR motion . .TP .B "" Interrupt the current operation. .SH VI TEXT INPUT COMMANDS The following section describes the commands available in the text input mode of the .I \&vi editor. .PP .TP .B "" Replay the previous input. .TP .B "" Erase to the previous .B shiftwidth column boundary. .TP .B "^" Erase all of the autoindent characters, and reset the autoindent level. .TP .B "0" Erase all of the autoindent characters. .TP .B "" Insert sufficient .I and .I characters to move forward to the next .B shiftwidth column boundary. .TP .B " .TP .B "" Erase the last character. .TP .B "" Quote the next character. .TP .B " Resolve all text input into the file, and return to command mode. .TP .B "" Erase the current line. .TP .B "" .TP .B "" Erase the last word. The definition of word is dependent on the .B altwerase and .B ttywerase options. .TP .B "[0-9A-Fa-f]+" Insert a character with the specified hexadecimal value into the text. .TP .B "" Interrupt text input mode, returning to command mode. .SH EX COMMANDS The following section describes the commands available in the .I \&ex editor. In each entry below, the tag line is a usage synopsis for the command. .PP .TP .B "" Scroll the screen. .TP .B "! argument(s)" .TP .B "[range]! argument(s)" Execute a shell command, or filter lines through a shell command. .TP .B \&" A comment. .TP .B "[range] nu[mber] [count] [flags]" .TP .B "[range] # [count] [flags]" Display the selected lines, each preceded with its line number. .TP .B "@ buffer" .TP .B "* buffer" Execute a buffer. .TP .B "[line] a[ppend][!]" The input text is appended after the specified line. .TP .B "[range] c[hange][!] [count]" The input text replaces the specified range. .TP .B "cs[cope] add | find | help | kill | reset" Execute a Cscope command. .TP .B "[range] d[elete] [buffer] [count] [flags]" Delete the lines from the file. .TP .B "di[splay] b[uffers] | c[onnections] | s[creens] | t[ags]" Display buffers, Cscope connections, screens or tags. .TP .B "[Ee][dit][!] [+cmd] [file]" .TP .B "[Ee]x[!] [+cmd] [file]" Edit a different file. .TP .B "exu[sage] [command]" Display usage for an .I \&ex command. .TP .B "f[ile] [file]" Display and optionally change the file name. .TP .B "[Ff]g [name]" .I \&Vi mode only. Foreground the specified screen. .TP .B "[range] g[lobal] /pattern/ [commands]" .TP .B "[range] v /pattern/ [commands]" Apply commands to lines matching (or not matching) a pattern. .TP .B "he[lp]" Display a help message. .TP .B "[line] i[nsert][!]" The input text is inserted before the specified line. .TP .B "[range] j[oin][!] [count] [flags]" Join lines of text together. .TP .B "[range] l[ist] [count] [flags]" Display the lines unambiguously. .TP .B "map[!] [lhs rhs]" Define or display maps (for .I \&vi only). .TP .B "[line] ma[rk] " .TP .B "[line] k " Mark the line with the mark .IR . .TP .B "[range] m[ove] line" Move the specified lines after the target line. .TP .B "mk[exrc][!] file" Write the abbreviations, editor options and maps to the specified file. .TP .B "[Nn][ext][!] [file ...]" Edit the next file from the argument list. .TP .B "[line] o[pen] /pattern/ [flags]" Enter open mode. .TP .B "pre[serve]" Save the file in a form that can later be recovered using the .I \&ex .B \-r option. .TP .B "[Pp]rev[ious][!]" Edit the previous file from the argument list. .TP .B "[range] p[rint] [count] [flags]" Display the specified lines. .TP .B "[line] pu[t] [buffer]" Append buffer contents to the current line. .TP .B "q[uit][!]" End the editing session. .TP .B "[line] r[ead][!] [file]" Read a file. .TP .B "rec[over] file" Recover .I file if it was previously saved. .TP .B "res[ize] [+|-]size" .I \&Vi mode only. Grow or shrink the current screen. .TP .B "rew[ind][!]" Rewind the argument list. .TP .B "se[t] [option[=[value]] ...] [nooption ...] [option? ...] [all]" Display or set editor options. .TP .B "sh[ell]" Run a shell program. .TP .B "so[urce] file" Read and execute .I \&ex commands from a file. .TP .B "[range] s[ubstitute] [/pattern/replace/] [options] [count] [flags]" .TP .B "[range] & [options] [count] [flags]" .TP .B "[range] ~ [options] [count] [flags]" Make substitutions. .TP .B "su[spend][!]" .TP .B "st[op][!]" .TP .B Suspend the edit session. .TP .B "[Tt]a[g][!] tagstring" Edit the file containing the specified tag. .TP .B "tagn[ext][!]" Edit the file containing the next context for the current tag. .TP .B "tagp[op][!] [file | number]" Pop to the specified tag in the tags stack. .TP .B "tagp[rev][!]" Edit the file containing the previous context for the current tag. .TP .B "unm[ap][!] lhs" Unmap a mapped string. .TP .B "ve[rsion]" Display the version of the .I \&ex/vi editor. .TP .B "[line] vi[sual] [type] [count] [flags]" .I \&Ex mode only. Enter .IR \&vi . .TP .B "[Vi]i[sual][!] [+cmd] [file]" .I \&Vi mode only. Edit a new file. .TP .B "viu[sage] [command]" Display usage for a .I \&vi command. .TP .B "[range] w[rite][!] [>>] [file]" .TP .B "[range] w[rite] [!] [file]" .TP .B "[range] wn[!] [>>] [file]" .TP .B "[range] wq[!] [>>] [file]" Write the file. .TP .B "[range] x[it][!] [file]" Write the file if it has been modified. .TP .B "[range] ya[nk] [buffer] [count]" Copy the specified lines to a buffer. .TP .B "[line] z [type] [count] [flags]" Adjust the window. .SH SET OPTIONS There are a large number of options that may be set (or unset) to change the editor's behavior. This section describes the options, their abbreviations and their default values. .PP In each entry below, the first part of the tag line is the full name of the option, followed by any equivalent abbreviations. The part in square brackets is the default value of the option. Most of the options are boolean, i.e. they are either on or off, and do not have an associated value. .PP Options apply to both .I \&ex and .I \&vi modes, unless otherwise specified. .PP .TP .B "altwerase [off]" .I \&Vi only. Select an alternate word erase algorithm. .TP .B "autoindent, ai [off]" Automatically indent new lines. .TP .B "autoprint, ap [off]" .I \&Ex only. Display the current line automatically. .TP .B "autowrite, aw [off]" Write modified files automatically when changing files. .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms backup [QQ] .TP .B "\*(ms" .tr QQ Backup files before they are overwritten. .TP .B "beautify, bf [off]" Discard control characters. .TP .B "cdpath [environment variable CDPATH, or current directory]" The directory paths used as path prefixes for the .B cd command. .TP .B "cedit [no default]" Set the character to edit the colon command-line history. .TP .B "columns, co [80]" Set the number of columns in the screen. .TP .B "comment [off]" .I \&Vi only. Skip leading comments in shell, C and C++ language files. .TP .B "directory, dir [environment variable TMPDIR, or /tmp]" The directory where temporary files are created. .TP .B "edcompatible, ed [off]" Remember the values of the ``c'' and ``g'' suffices to the .B substitute commands, instead of initializing them as unset for each new command. .TP .B "errorbells, eb [off]" .I \&Ex only. Announce error messages with a bell. .TP .B "exrc, ex [off]" Read the startup files in the local directory. .TP .B "extended [off]" Regular expressions are extended (i.e. .IR egrep (1)\-\c style) expressions. .TP .B "filec [no default]" Set the character to perform file path completion on the colon command line. .TP .B "flash [on]" Flash the screen instead of beeping the keyboard on error. .TP .B "hardtabs, ht [8]" Set the spacing between hardware tab settings. .TP .B "iclower [off]" Makes all Regular Expressions case-insensitive, as long as an upper-case letter does not appear in the search string. .TP .B "ignorecase, ic [off]" Ignore case differences in regular expressions. .TP .B "keytime [6]" The 10th's of a second .I ex/vi waits for a subsequent key to complete a key mapping. .TP .B "leftright [off]" .I \&Vi only. Do left-right scrolling. .TP .B "lines, li [24]" .I \&Vi only. Set the number of lines in the screen. .TP .B "lisp [off]" .I \&Vi only. Modify various search commands and options to work with Lisp. .I "This option is not yet implemented." .TP .B "list [off]" Display lines in an unambiguous fashion. .TP .B "lock [on]" Attempt to get an exclusive lock on any file being edited, read or written. .TP .B "magic [on]" Treat certain characters specially in regular expressions. .TP .B "matchtime [7]" .I \&Vi only. The 10th's of a second .I ex/vi pauses on the matching character when the .B showmatch option is set. .TP .B "mesg [on]" Permit messages from other users. .TP .B "modelines, modeline [off]" Read the first and last few lines of each file for .I ex commands. .I "This option will never be implemented." .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms noprint [QQ] .TP .B "\*(ms" .tr QQ Characters that are never handled as printable characters. .TP .B "number, nu [off]" Precede each line displayed with its current line number. .TP .B "octal [off]" Display unknown characters as octal numbers, instead of the default hexadecimal. .TP .B "open [on]" .I \&Ex only. If this option is not set, the .B open and .B visual commands are disallowed. .TP .B "optimize, opt [on]" .I \&Vi only. Optimize text throughput to dumb terminals. .I "This option is not yet implemented." .TP .B "paragraphs, para [IPLPPPQPP LIpplpipbp]" .I \&Vi only. Define additional paragraph boundaries for the .B \&{ and .B \&} commands. .TP .B "path []" Define additional directories to search for files being edited. .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms print [QQ] .TP .B "\*(ms" .tr QQ Characters that are always handled as printable characters. .TP .B "prompt [on]" .I \&Ex only. Display a command prompt. .TP .B "readonly, ro [off]" Mark the file and session as read-only. .TP .B "recdir [/var/tmp/vi.recover]" The directory where recovery files are stored. .TP .B "redraw, re [off]" .I \&Vi only. Simulate an intelligent terminal on a dumb one. .I "This option is not yet implemented." .TP .B "remap [on]" Remap keys until resolved. .TP .B "report [5]" Set the number of lines about which the editor reports changes or yanks. .TP .B "ruler [off]" .I \&Vi only. Display a row/column ruler on the colon command line. .TP .B "scroll, scr [window / 2]" Set the number of lines scrolled. .TP .B "searchincr [off]" Makes the .B \&/ and .B \&? commands incremental. .TP .B "sections, sect [NHSHH HUnhsh]" .I \&Vi only. Define additional section boundaries for the .B \&[[ and .B \&]] commands. .TP .B "secure [off]" Turns off all access to external programs. .TP .B "shell, sh [environment variable SHELL, or /bin/sh]" Select the shell used by the editor. .\" I cannot get a double quote to print between the square brackets .\" to save my life. The ONLY way I've been able to get this to work .\" is with the .tr command. .tr Q" .ds ms shellmeta [~{[*?$`'Q\e] .TP .B "\*(ms" .tr QQ Set the meta characters checked to determine if file name expansion is necessary. .TP .B "shiftwidth, sw [8]" Set the autoindent and shift command indentation width. .TP .B "showmatch, sm [off]" .I \&Vi only. Note matching ``{'' and ``('' for ``}'' and ``)'' characters. .TP .B "showmode, smd [off]" .I \&Vi only. Display the current editor mode and a ``modified'' flag. .TP .B "sidescroll [16]" .I \&Vi only. Set the amount a left-right scroll will shift. .TP .B "slowopen, slow [off]" Delay display updating during text input. .I "This option is not yet implemented." .TP .B "sourceany [off]" Read startup files not owned by the current user. .I "This option will never be implemented." .TP .B "tabstop, ts [8]" This option sets tab widths for the editor display. .TP .B "taglength, tl [0]" Set the number of significant characters in tag names. .TP .B "tags, tag [tags /var/db/libc.tags /sys/kern/tags]" Set the list of tags files. .TP .B "term, ttytype, tty [environment variable TERM]" Set the terminal type. .TP .B "terse [off]" This option has historically made editor messages less verbose. It has no effect in this implementation. .TP .B "tildeop [off]" Modify the .B \&~ command to take an associated motion. .TP .B "timeout, to [on]" Time out on keys which may be mapped. .TP .B "ttywerase [off]" .I \&Vi only. Select an alternate erase algorithm. .TP .B "verbose [off]" .I \&Vi only. Display an error message for every error. .TP .B "w300 [no default]" .I \&Vi only. Set the window size if the baud rate is less than 1200 baud. .TP .B "w1200 [no default]" .I \&Vi only. Set the window size if the baud rate is equal to 1200 baud. .TP .B "w9600 [no default]" .I \&Vi only. Set the window size if the baud rate is greater than 1200 baud. .TP .B "warn [on]" .I \&Ex only. This option causes a warning message to the terminal if the file has been modified, since it was last written, before a .B \&! command. .TP .B "window, w, wi [environment variable LINES]" Set the window size for the screen. .TP .B "windowname [off]" Change the icon/window name to the current file name even if it can't be restored on editor exit. .TP .B "wraplen, wl [0]" .I \&Vi only. Break lines automatically, the specified number of columns from the left-hand margin. If both the .B wraplen and .B wrapmargin edit options are set, the .B wrapmargin value is used. .TP .B "wrapmargin, wm [0]" .I \&Vi only. Break lines automatically, the specified number of columns from the right-hand margin. If both the .B wraplen and .B wrapmargin edit options are set, the .B wrapmargin value is used. .TP .B "wrapscan, ws [on]" Set searches to wrap around the end or beginning of the file. .TP .B "writeany, wa [off]" Turn off file-overwriting checks. .SH ENVIRONMENTAL VARIABLES .TP .I COLUMNS The number of columns on the screen. This value overrides any system or terminal specific values. If the .I COLUMNS environmental variable is not set when .I ex/vi runs, or the .B columns option is explicitly reset by the user, .I ex/vi enters the value into the environment. .TP .I EXINIT A list of .I \&ex startup commands, read if the variable .I NEXINIT is not set. .TP .I HOME The user's home directory, used as the initial directory path for the startup ``$\fIHOME\fP/.nexrc'' and ``$\fIHOME\fP/.exrc'' files. This value is also used as the default directory for the .I \&vi .B \&cd command. .TP .I LINES The number of rows on the screen. This value overrides any system or terminal specific values. If the .I LINES environmental variable is not set when .I ex/vi runs, or the .B lines option is explicitly reset by the user, .I ex/vi enters the value into the environment. .TP .I NEXINIT A list of .I \&ex startup commands. .TP .I SHELL The user's shell of choice (see also the .B shell option). .TP .I TERM The user's terminal type. The default is the type ``unknown''. If the .I TERM environmental variable is not set when .I ex/vi runs, or the .B term option is explicitly reset by the user, .I ex/vi enters the value into the environment. .TP .I TMPDIR The location used to stored temporary files (see also the .B directory edit option). .SH ASYNCHRONOUS EVENTS .TP SIGALRM .I \&Vi/ex uses this signal for periodic backups of file modifications and to display ``busy'' messages when operations are likely to take a long time. .TP SIGHUP .TP SIGTERM If the current buffer has changed since it was last written in its entirety, the editor attempts to save the modified file so it can be later recovered. See the .I \&vi/ex Reference manual section entitled ``Recovery'' for more information. .TP SIGINT When an interrupt occurs, the current operation is halted, and the editor returns to the command level. If interrupted during text input, the text already input is resolved into the file as if the text input had been normally terminated. .TP SIGWINCH The screen is resized. See the .I \&vi/ex Reference manual section entitled ``Sizing the Screen'' for more information. .TP SIGCONT .TP SIGQUIT .TP SIGTSTP .I \&Vi/ex ignores these signals. .SH FILES .TP /bin/sh The default user shell. .TP /etc/vi.exrc System-wide vi startup file. .TP /tmp Temporary file directory. .TP /var/tmp/vi.recover The default recovery file directory. .TP $HOME/.nexrc 1st choice for user's home directory startup file. .TP $HOME/.exrc 2nd choice for user's home directory startup file. .TP \&.nexrc 1st choice for local directory startup file. .TP \&.exrc 2nd choice for local directory startup file. .SH SEE ALSO .IR ctags (1), .IR more (3), .IR curses (3), .IR dbopen (3) .sp The ``Vi Quick Reference'' card. .sp ``An Introduction to Display Editing with Vi'', found in the ``UNIX User's Manual Supplementary Documents'' section of both the 4.3BSD and 4.4BSD manual sets. This document is the closest thing available to an introduction to the .I \&vi screen editor. .sp ``Ex Reference Manual (Version 3.7)'', found in the ``UNIX User's Manual Supplementary Documents'' section of both the 4.3BSD and 4.4BSD manual sets. This document is the final reference for the .I \&ex editor, as distributed in most historic 4BSD and System V systems. .sp ``Edit: A tutorial'', found in the ``UNIX User's Manual Supplementary Documents'' section of the 4.3BSD manual set. This document is an introduction to a simple version of the .I \&ex screen editor. .sp ``Ex/Vi Reference Manual'', found in the ``UNIX User's Manual Supplementary Documents'' section of the 4.4BSD manual set. This document is the final reference for the .I \&nex/nvi text editors, as distributed in 4.4BSD and 4.4BSD-Lite. .PP .I Roff source for all of these documents is distributed with .I nex/nvi in the .I nvi/USD.doc directory of the .I nex/nvi source code. .sp The files ``autowrite'', ``input'', ``quoting'' and ``structures'' found in the .I nvi/docs/internals directory of the .I nex/nvi source code. .SH HISTORY The .I nex/nvi replacements for the .I ex/vi editor first appeared in 4.4BSD. .SH STANDARDS .I \&Nex/nvi is close to IEEE Std1003.2 (``POSIX''). That document differs from historical .I ex/vi practice in several places; there are changes to be made on both sides. vigor-0.016.orig/docs/USD.doc/vi.man/spell.ok0100644000076400007640000000176707103707243017275 0ustar cjw44cjw44Ar Bostic CDPATH COLUMNSXX Cscope Ds EXINIT Ee Ev Fa Ff Fl HUnhsh IPLPPPQPP LIpplpipbp Li Lite NEXINIT NHSHH Nex Nn POSIX Pp QQ SIGWINCHXX Std Sy TMPDIR Tt USD Unmap VI Vi XXXX ZZ ags ai altwerase ap autoindent autoprint autowrite aw bf bigwords cd cdpath cedit cmd co creens cs ctags db dbopen dd di dir dit doc docs eFRrsv eFRrv eFlRrv ead eb edcompatible egrep elete errorbells esc exrc exu fg filec hange hardtabs ht ic iclower ignorecase ile ind ious ist ize keytime leftright lhs li libc lobal lp matchtime mber mesg mk modeful modeline modelines nex nexrc nk nonblank nooption noprint nsert nul nvi oin onnections ove ppend prev pu readonly rec recdir redist rhs rint rk ro rsion sccs scr se searchincr sh shareware shellmeta shiftwidth showmatch showmode sidescroll slowopen sm smd sourceany su sual sw ta tabstop taglength tagn tagp tagstring th's tildeop tl tmp tr ts ttytype ttywerase ubstitute uffers uit unm urce var ve vi viu wa wi windowname wl wm wn wq wraplen wrapmargin wrapscan writeany ws ya yy vigor-0.016.orig/docs/USD.doc/vitut/0040755000076400007640000000000007103707243015576 5ustar cjw44cjw44vigor-0.016.orig/docs/USD.doc/vitut/Makefile0100644000076400007640000000062507103707243017236 0ustar cjw44cjw44# @(#)Makefile 8.7 (Berkeley) 8/18/96 MACROS= -ms ROFF= groff TBL= tbl all: vitut.ps summary.ps viapwh.ps vitut.ps: vi.in vi.chars ${TBL} vi.in vi.chars | ${ROFF} ${MACROS} > $@ chmod 444 $@ summary.ps: vi.summary ${TBL} vi.summary | ${ROFF} ${MACROS} > $@ chmod 444 $@ viapwh.ps: vi.apwh.ms ${TBL} vi.apwh.ms | ${ROFF} ${MACROS} > $@ chmod 444 $@ clean: rm -f vitut.ps summary.ps viapwh.ps vigor-0.016.orig/docs/USD.doc/vitut/vi.apwh.ms0100644000076400007640000011756607103707243017530 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)vi.apwh.ms 8.2 (Berkeley) 8/18/96 .\" .nr LL 6.5i .nr FL 6.5i .TL Vi Command & Function Reference .AU CB 2675 Alan P.W. Hewett .sp Revised for version 2.12 by Mark Horton .CB .NH 1 Author's Disclaimer .LP This document does not claim to be 100% complete. There are a few commands listed in the original document that I was unable to test either because I do not speak \fBlisp\fR, because they required programs we don't have, or because I wasn't able to make them work. In these cases I left the command out. The commands listed in this document have been tried and are known to work. It is expected that prospective users of this document will read it once to get the flavor of everything that \fBvi\fR can do and then use it as a reference document. Experimentation is recommended. If you don't understand a command, try it and see what happens. .LP [Note: In revising this document, I have attempted to make it completely reflect version 2.12 of .B vi . It does not attempt to document the VAX version (version 3), but with one or two exceptions (wrapmargin, arrow keys) everything said about 2.12 should apply to 3.1. .I "Mark Horton" ] .NH 1 Notation .LP \fB[option]\fR is used to denote optional parts of a command. Many \fBvi\fR commands have an optional count. \fB[cnt]\fR means that an optional number may precede the command to multiply or iterate the command. \fB{variable item}\fR is used to denote parts of the command which must appear, but can take a number of different values. \fB\fR means that the character or one of the characters in the range described between the two angle brackets is to be typed. For example \fB\fR means the \fBescape\fR key is to be typed. \fB\fR means that a lower case letter is to be typed. \fB^\fR means that the character is to be typed as a \fBcontrol\fR character, that is, with the \fB\fR key held down while simultaneously typing the specified character. In this document control characters will be denoted using the \fIupper case\fR character, but ^ and ^ are equivalent. That is, for example, \fB<^D>\fR is equal to \fB<^d>\fR. The most common character abbreviations used in this list are as follows: .VL 8 .IP 8 escape, octal 033 .IP 8 carriage return, ^M, octal 015 .IP 8 linefeed ^J, octal 012 .IP 8 newline, ^J, octal 012 (same as linefeed) .IP 8 backspace, ^H, octal 010 .IP 8 tab, ^I, octal 011 .IP 8 bell, ^G, octal 07 .IP 8 formfeed, ^L, octal 014 .IP 8 space, octal 040 .IP 8 delete, octal 0177 .LE .sp 1 .NH 1 Basics .LP To run \fBvi\fR the shell variable \fBTERM\fR must be defined and exported to your environment. How you do this depends on which shell you are using. You can tell which shell you have by the character it prompts you for commands with. The Bourne shell prompts with `$', and the C shell prompts with `%'. For these examples, we will suppose that you are using an HP 2621 terminal, whose termcap name is ``2621''. .NH 2 Bourne Shell .LP To manually set your terminal type to 2621 you would type: .DS TERM=2621 export TERM .DE .PP There are various ways of having this automatically or semi-automatically done when you log in. Suppose you usually dial in on a 2621. You want to tell this to the machine, but still have it work when you use a hardwired terminal. The recommended way, if you have the .B tset program, is to use the sequence .DS tset \-s \-d 2621 > tset$$ \&. tset$$ rm tset$$ .DE in your .login (for csh) or the same thing using `.' instead of `source' in your .profile (for sh). The above line says that if you are dialing in you are on a 2621, but if you are on a hardwired terminal it figures out your terminal type from an on-line list. .NH 2 The C Shell .LP To manually set your terminal type to 2621 you would type: .DS setenv TERM 2621 .DE .PP There are various ways of having this automatically or semi-automatically done when you log in. Suppose you usually dial in on a 2621. You want to tell this to the machine, but still have it work when you use a hardwired terminal. The recommended way, if you have the .B tset program, is to use the sequence .DS tset \-s \-d 2621 > tset$$ source tset$$ rm tset$$ .DE in your .login.* .FS * On a version 6 system without environments, the invocation of tset is simpler, just add the line ``tset \-d 2621'' to your .login or .profile. .FE The above line says that if you are dialing in you are on a 2621, but if you are on a hardwired terminal it figures out your terminal type from an on-line list. .NH 1 Normal Commands .LP \fBVi\fR is a visual editor with a window on the file. What you see on the screen is \fBvi\fR's current notion of what your file will contain, (at this point in the file), when it is written out. Most commands do not cause any change in the screen until the complete command is typed. Should you get confused while typing a command, you can abort the command by typing an character. You will know you are back to command level when you hear a . Usually typing an will produce the same result. When \fBvi\fR gets an improperly formatted command it rings the . Following are the \fBvi\fR commands broken down by function. .NH 2 Entry and Exit .LP To enter .B vi on a particular .I file , type .DS \fBvi\fP \fIfile\fP .DE The file will be read in and the cursor will be placed at the beginning of the first line. The first screenfull of the file will be displayed on the terminal. .PP To get out of the editor, type .DS ZZ .DE If you are in some special mode, such as input mode or the middle of a multi-keystroke command, it may be necessary to type first. .NH 2 Cursor and Page Motion .LP .VL 16 .B NOTE: The arrow keys (see the next four commands) on certain kinds of terminals will not work with the PDP-11 version of vi. The control versions or the hjkl versions will work on any terminal. Experienced users prefer the hjkl keys because they are always right under their fingers. Beginners often prefer the arrow keys, since they do not require memorization of which hjkl key is which. The mnemonic value of hjkl is clear from looking at the keyboard of an adm3a. .sp .IP "[cnt] or [cnt]h or [cnt]\(<-" 16 .br Move the cursor to the left one character. Cursor stops at the left margin of the page. If cnt is given, these commands move that many spaces. .IP "[cnt]^N or [cnt]j or [cnt]\(da or [cnt]" 16 .br Move down one line. Moving off the screen scrolls the window to force a new line onto the screen. Mnemonic: \fBN\fRext .IP "[cnt]^P or [cnt]k or [cnt]\(ua" 16 .br Move up one line. Moving off the top of the screen forces new text onto the screen. Mnemonic: \fBP\fRrevious .IP "[cnt] or [cnt]l or [cnt]\(->" 16 .br Move to the right one character. Cursor will not go beyond the end of the line. .IP [cnt]- 16 Move the cursor up the screen to the beginning of the next line. Scroll if necessary. .IP "[cnt]+ or [cnt]" 16 .sp 1 Move the cursor down the screen to the beginning of the next line. Scroll up if necessary. .IP "[cnt]$" 16 Move the cursor to the end of the line. If there is a count, move to the end of the line "cnt" lines forward in the file. .IP "^" 16 Move the cursor to the beginning of the first word on the line. .IP "0" 16 Move the cursor to the left margin of the current line. .IP "[cnt]|" 16 Move the cursor to the column specified by the count. The default is column zero. .IP "[cnt]w" 16 Move the cursor to the beginning of the next word. If there is a count, then move forward that many words and position the cursor at the beginning of the word. Mnemonic: next-\fBw\fRord .IP "[cnt]W" 16 Move the cursor to the beginning of the next word which follows a "white space" (,, or ). Ignore other punctuation. .IP "[cnt]b" 16 Move the cursor to the preceding word. Mnemonic: \fBb\fRackup-word .IP "[cnt]B" 16 Move the cursor to the preceding word that is separated from the current word by a "white space" (,, or ). .IP "[cnt]e" 16 Move the cursor to the end of the current word or the end of the "cnt"'th word hence. Mnemonic: \fBe\fRnd-of-word .IP "[cnt]E" 16 Move the cursor to the end of the current word which is delimited by "white space" (,, or ). .IP "[line number]G" 16 .br Move the cursor to the line specified. Of particular use are the sequences "1G" and "G", which move the cursor to the beginning and the end of the file respectively. Mnemonic: \fBG\fRo-to .LP .B NOTE: The next four commands (^D, ^U, ^F, ^B) are not true motion commands, in that they cannot be used as the object of commands such as delete or change. .IP "[cnt]^D" 16 Move the cursor down in the file by "cnt" lines (or the last "cnt" if a new count isn't given. The initial default is half a page.) The screen is simultaneously scrolled up. Mnemonic: \fBD\fRown .IP "[cnt]^U" 16 Move the cursor up in the file by "cnt" lines. The screen is simultaneously scrolled down. Mnemonic: \fBU\fRp .IP "[cnt]^F" 16 Move the cursor to the next page. A count moves that many pages. Two lines of the previous page are kept on the screen for continuity if possible. Mnemonic: \fBF\fRorward-a-page .IP "[cnt]^B" 16 Move the cursor to the previous page. Two lines of the current page are kept if possible. Mnemonic: \fBB\fRackup-a-page .IP "[cnt](" 16 Move the cursor to the beginning of the next sentence. A sentence is defined as ending with a ".", "!", or "?" followed by two spaces or a . .IP "[cnt])" 16 Move the cursor backwards to the beginning of a sentence. .IP "[cnt]}" 16 Move the cursor to the beginning of the next paragraph. This command works best inside \fBnroff\fR documents. It understands two sets of \fBnroff\fR macros, \fB\-ms\fR and \fB\-mm\fR, for which the commands ".IP", ".LP", ".PP", ".QP", "P", as well as the nroff command ".bp" are considered to be paragraph delimiters. A blank line also delimits a paragraph. The \fBnroff\fR macros that it accepts as paragraph delimiters is adjustable. See \fBparagraphs\fR under the \fBSet Commands\fR section. .IP "[cnt]{" 16 Move the cursor backwards to the beginning of a paragraph. .IP "]]" 16 Move the cursor to the next "section", where a section is defined by two sets of \fBnroff\fR macros, \fB\-ms\fR and \fB\-mm\fR, in which ".NH", ".SH", and ".H" delimit a section. A line beginning with a sequence, or a line beginning with a "{" are also considered to be section delimiters. The last option makes it useful for finding the beginnings of C functions. The \fBnroff\fR macros that are used for section delimiters can be adjusted. See \fBsections\fR under the \fBSet Commands\fR section. .IP "[[" 16 Move the cursor backwards to the beginning of a section. .IP "%" 16 Move the cursor to the matching parenthesis or brace. This is very useful in C or lisp code. If the cursor is sitting on a \fB( ) {\fR or \fB}\fR the cursor is moved to the matching character at the other end of the section. If the cursor is not sitting on a brace or a parenthesis, \fBvi\fR searches forward until it finds one and then jumps to the match mate. .IP "[cnt]H" 16 If there is no count move the cursor to the top left position on the screen. If there is a count, then move the cursor to the beginning of the line "cnt" lines from the top of the screen. Mnemonic: \fBH\fRome .IP "[cnt]L" 16 If there is no count move the cursor to the beginning of the last line on the screen. If there is a count, then move the cursor to the beginning of the line "cnt" lines from the bottom of the screen. Mnemonic: \fBL\fRast .IP "M" 16 Move the cursor to the beginning of the middle line on the screen. Mnemonic: \fBM\fRiddle .IP "m" 16 This command does not move the cursor, but it \fBmarks\fR the place in the file and the character "" becomes the label for referring to this location in the file. See the next two commands. Mnemonic: \fBm\fRark .B NOTE: The mark command is not a motion, and cannot be used as the target of commands such as delete. .IP "\(aa" 16 Move the cursor to the beginning of the line that is marked with the label "". .IP "\(ga" 16 Move the cursor to the exact position on the line that was marked with with the label "". .IP "\(aa\(aa" 16 Move the cursor back to the beginning of the line where it was before the last "non-relative" move. A "non-relative" move is something such as a search or a jump to a specific line in the file, rather than moving the cursor or scrolling the screen. .IP "\(ga\(ga" 16 Move the cursor back to the exact spot on the line where it was located before the last "non-relative" move. .LE .NH 2 Searches .LP The following commands allow you to search for items in a file. .VL 16 .IP [cnt]f{chr} 16 .sp 1 Search forward on the line for the next or "cnt"'th occurrence of the character "chr". The cursor is placed \fBat\fR the character of interest. Mnemonic: \fBf\fRind character .IP [cnt]F{chr} 16 .sp 1 Search backwards on the line for the next or "cnt"'th occurrence of the character "chr". The cursor is placed \fBat\fR the character of interest. .IP [cnt]t{chr} 16 .sp 1 Search forward on the line for the next or "cnt"'th occurrence of the character "chr". The cursor is placed \fBjust preceding\fR the character of interest. Mnemonic: move cursor up \fBt\fRo character .IP [cnt]T{chr} 16 .sp 1 Search backwards on the line for the next or "cnt"'th occurrence of the character "chr". The cursor is placed \fBjust preceding\fR the character of interest. .IP "[cnt];" 16 Repeat the last "f", "F", "t" or "T" command. .IP "[cnt]," 16 Repeat the last "f", "F", "t" or "T" command, but in the opposite search direction. This is useful if you overshoot. .IP "[cnt]/[string]/" 16 .br Search forward for the next occurrence of "string". Wrap around at the end of the file does occur. The final \fB\fR is not required. .IP "[cnt]?[string]?" 16 .br Search backwards for the next occurrence of "string". If a count is specified, the count becomes the new window size. Wrap around at the beginning of the file does occur. The final \fB\fR is not required. .IP n 16 Repeat the last /[string]/ or ?[string]? search. Mnemonic: \fBn\fRext occurrence. .IP N 16 Repeat the last /[string]/ or ?[string]? search, but in the reverse direction. .IP ":g/[string]/[editor command]" 16 .sp 1 Using the \fB:\fR syntax it is possible to do global searches ala the standard UNIX "ed" editor. .LE .NH 2 Text Insertion .LP The following commands allow for the insertion of text. All multicharacter text insertions are terminated with an character. The last change can always be \fBundone\fR by typing a \fBu\fR. The text insert in insertion mode can contain newlines. .VL 16 .IP a{text} 16 Insert text immediately following the cursor position. Mnemonic: \fBa\fRppend .IP A{text} 16 Insert text at the end of the current line. Mnemonic: \fBA\fRppend .IP i{text} 16 Insert text immediately preceding the cursor position. Mnemonic: \fBi\fRnsert .IP I{text} 16 Insert text at the beginning of the current line. .IP o{text} 16 Insert a new line after the line on which the cursor appears and insert text there. Mnemonic: \fBo\fRpen new line .IP O{text} 16 Insert a new line preceding the line on which the cursor appears and insert text there. .LE .NH 2 Text Deletion .LP The following commands allow the user to delete text in various ways. All changes can always be \fBundone\fR by typing the \fBu\fR command. .VL 16 .IP "[cnt]x" 16 Delete the character or characters starting at the cursor position. .IP "[cnt]X" 16 Delete the character or characters starting at the character preceding the cursor position. .IP "D" 16 Deletes the remainder of the line starting at the cursor. Mnemonic: \fBD\fRelete the rest of line .IP "[cnt]d{motion}" 16 .br Deletes one or more occurrences of the specified motion. Any motion from sections 4.1 and 4.2 can be used here. The d can be stuttered (e.g. [cnt]dd) to delete cnt lines. .LE .NH 2 Text Replacement .LP The following commands allow the user to simultaneously delete and insert new text. All such actions can be \fBundone\fR by typing \fBu\fR following the command. .VL 16 .IP "r" 16 Replaces the character at the current cursor position with . This is a one character replacement. No is required for termination. Mnemonic: \fBr\fReplace character .IP "R{text}" 16 Starts overlaying the characters on the screen with whatever you type. It does not stop until an is typed. .IP "[cnt]s{text}" 16 Substitute for "cnt" characters beginning at the current cursor position. A "$" will appear at the position in the text where the "cnt"'th character appears so you will know how much you are erasing. Mnemonic: \fBs\fRubstitute .IP "[cnt]S{text}" 16 Substitute for the entire current line (or lines). If no count is given, a "$" appears at the end of the current line. If a count of more than 1 is given, all the lines to be replaced are deleted before the insertion begins. .IP "[cnt]c{motion}{text}" 16 .br Change the specified "motion" by replacing it with the insertion text. A "$" will appear at the end of the last item that is being deleted unless the deletion involves whole lines. Motion's can be any motion from sections 4.1 or 4.2. Stuttering the c (e.g. [cnt]cc) changes cnt lines. .LE .NH 2 Moving Text .LP \fBVi\fR provides a number of ways of moving chunks of text around. There are nine buffers into which each piece of text which is deleted or "yanked" is put in addition to the "undo" buffer. The most recent deletion or yank is in the "undo" buffer and also usually in buffer 1, the next most recent in buffer 2, and so forth. Each new deletion pushes down all the older deletions. Deletions older than 9 disappear. There is also a set of named registers, a-z, into which text can optionally be placed. If any delete or replacement type command is preceded by \fB"\fR, that named buffer will contain the text deleted after the command is executed. For example, \fB"a3dd\fR will delete three lines starting at the current line and put them in buffer \fB"a\fR.* .FS * Referring to an upper case letter as a buffer name (A-Z) is the same as referring to the lower case letter, except that text placed in such a buffer is appended to it instead of replacing it. .FE There are two more basic commands and some variations useful in getting and putting text into a file. .VL 16 .IP ["][cnt]y{motion} 16 .sp 1 Yank the specified item or "cnt" items and put in the "undo" buffer or the specified buffer. The variety of "items" that can be yanked is the same as those that can be deleted with the "d" command or changed with the "c" command. In the same way that "dd" means delete the current line and "cc" means replace the current line, "yy" means yank the current line. .IP ["][cnt]Y 16 Yank the current line or the "cnt" lines starting from the current line. If no buffer is specified, they will go into the "undo" buffer, like any delete would. It is equivalent to "yy". Mnemonic: \fBY\fRank .IP ["]p 16 Put "undo" buffer or the specified buffer down \fBafter\fR the cursor. If whole lines were yanked or deleted into the buffer, then they will be put down on the line following the line the cursor is on. If something else was deleted, like a word or sentence, then it will be inserted immediately following the cursor. Mnemonic: \fBp\fRut buffer .IP It should be noted that text in the named buffers remains there when you start editing a new file with the \fB:e file\fR command. Since this is so, it is possible to copy or delete text from one file and carry it over to another file in the buffers. However, the undo buffer and the ability to undo are lost when changing files. .IP ["]P 16 Put "undo" buffer or the specified buffer down \fBbefore\fR the cursor. If whole lines where yanked or deleted into the buffer, then they will be put down on the line preceding the line the cursor is on. If something else was deleted, like a word or sentence, then it will be inserted immediately preceding the cursor. .IP [cnt]>{motion} 16 The shift operator will right shift all the text from the line on which the cursor is located to the line where the \fBmotion\fR is located. The text is shifted by one \fBshiftwidth\fR. (See section 6.) \fB>>\fR means right shift the current line or lines. .IP [cnt]<{motion} 16 The shift operator will left shift all the text from the line on which the cursor is located to the line where the \fBitem\fR is located. The text is shifted by one \fBshiftwidth\fR. (See section 6.) \fB<<\fR means left shift the current line or lines. Once the line has reached the left margin it is not further affected. .IP [cnt]={motion} 16 Prettyprints the indicated area according to .B lisp conventions. The area should be a lisp s-expression. .LE .NH 2 Miscellaneous Commands .LP \fBVi\fR has a number of miscellaneous commands that are very useful. They are: .VL 16 .IP ZZ 16 This is the normal way to exit from vi. If any changes have been made, the file is written out. Then you are returned to the shell. .IP ^L 16 Redraw the current screen. This is useful if someone "write"s you while you are in "vi" or if for any reason garbage gets onto the screen. .IP ^R 16 On dumb terminals, those not having the "delete line" function (the vt100 is such a terminal), \fBvi\fR saves redrawing the screen when you delete a line by just marking the line with an "@" at the beginning and blanking the line. If you want to actually get rid of the lines marked with "@" and see what the page looks like, typing a ^R will do this. .IP \s+4.\s0 16 "Dot" is a particularly useful command. It repeats the last text modifying command. Therefore you can type a command once and then to another place and repeat it by just typing ".". .IP u 16 Perhaps the most important command in the editor, u undoes the last command that changed the buffer. Mnemonic: \fBu\fRndo .IP U 16 Undo all the text modifying commands performed on the current line since the last time you moved onto it. .IP [cnt]J 16 Join the current line and the following line. The is deleted and the two lines joined, usually with a space between the end of the first line and the beginning of what was the second line. If the first line ended with a "period", then two spaces are inserted. A count joins the next cnt lines. Mnemonic: \fBJ\fRoin lines .IP Q 16 Switch to \fBex\fR editing mode. In this mode \fBvi\fR will behave very much like \fBed\fR. The editor in this mode will operate on single lines normally and will not attempt to keep the "window" up to date. Once in this mode it is also possible to switch to the \fBopen\fR mode of editing. By entering the command \fB[line number]open\fR you enter this mode. It is similar to the normal visual mode except the window is only \fBone\fR line long. Mnemonic: \fBQ\fRuit visual mode .IP ^] 16 An abbreviation for a tag command. The cursor should be positioned at the beginning of a word. That word is taken as a tag name, and the tag with that name is found as if it had been typed in a :tag command. .IP [cnt]!{motion}{UNIX\ cmd} 16 .br Any UNIX filter (e.g. command that reads the standard input and outputs something to the standard output) can be sent a section of the current file and have the output of the command replace the original text. Useful examples are programs like \fBcb\fR, \fBsort\fR, and \fBnroff\fR. For instance, using \fBsort\fR it would be possible to sort a section of the current file into a new list. Using \fB!!\fR means take a line or lines starting at the line the cursor is currently on and pass them to the UNIX command. .B NOTE: To just escape to the shell for one command, use :!{cmd}, see section 5. .IP z{cnt} 16 This resets the current window size to "cnt" lines and redraws the screen. .LE .NH 2 Special Insert Characters .LP There are some characters that have special meanings during insert modes. They are: .VL 16 .IP ^V 16 During inserts, typing a ^V allows you to quote control characters into the file. Any character typed after the ^V will be inserted into the file. .IP [^]^D\ or\ [0]^D 16 <^D> without any argument backs up one \fBshiftwidth\fR. This is necessary to remove indentation that was inserted by the \fBautoindent\fR feature. ^<^D> temporarily removes all the autoindentation, thus placing the cursor at the left margin. On the next line, the previous indent level will be restored. This is useful for putting "labels" at the left margin. 0<^D> says remove all autoindents and stay that way. Thus the cursor moves to the left margin and stays there on successive lines until 's are typed. As with the , the <^D> is only effective before any other "non-autoindent" controlling characters are typed. Mnemonic: \fBD\fRelete a shiftwidth .IP ^W 16 If the cursor is sitting on a word, <^W> moves the cursor back to the beginning of the word, thus erasing the word from the insert. Mnemonic: erase \fBW\fRord .IP 16 The backspace always serves as an erase during insert modes in addition to your normal "erase" character. To insert a into your file, use the <^V> to quote it. .LE .NH 1 \fB:\fR Commands .LP Typing a ":" during command mode causes \fBvi\fR to put the cursor at the bottom on the screen in preparation for a command. In the ":" mode, \fBvi\fR can be given most \fBed\fR commands. It is also from this mode that you exit from \fBvi\fR or switch to different files. All commands of this variety are terminated by a , , or . .VL 16 .IP ":w[!] [file]" 16 Causes \fBvi\fR to write out the current text to the disk. It is written to the file you are editing unless "file" is supplied. If "file" is supplied, the write is directed to that file instead. If that file already exists, \fBvi\fR will not perform the write unless the "!" is supplied indicating you .I really want to destroy the older copy of the file. .IP :q[!] 16 Causes \fBvi\fR to exit. If you have modified the file you are looking at currently and haven't written it out, \fBvi\fR will refuse to exit unless the "!" is supplied. .IP ":e[!] [+[cmd]] [file]" 16 .sp 1 Start editing a new file called "file" or start editing the current file over again. The command ":e!" says "ignore the changes I've made to this file and start over from the beginning". It is useful if you really mess up the file. The optional "+" says instead of starting at the beginning, start at the "end", or, if "cmd" is supplied, execute "cmd" first. Useful cases of this are where cmd is "n" (any integer) which starts at line number n, and "/text", which searches for "text" and starts at the line where it is found. .IP "^^" 16 Switch back to the place you were before your last tag command. If your last tag command stayed within the file, ^^ returns to that tag. If you have no recent tag command, it will return to the same place in the previous file that it was showing when you switched to the current file. .IP ":n[!]" 16 Start editing the next file in the argument list. Since \fBvi\fR can be called with multiple file names, the ":n" command tells it to stop work on the current file and switch to the next file. If the current file was modifies, it has to be written out before the ":n" will work or else the "!" must be supplied, which says discard the changes I made to the current file. .IP ":n[!] file [file file ...]" 16 .sp Replace the current argument list with a new list of files and start editing the first file in this new list. .IP ":r file" 16 Read in a copy of "file" on the line after the cursor. .IP ":r !cmd" 16 Execute the "cmd" and take its output and put it into the file after the current line. .IP ":!cmd" 16 Execute any UNIX shell command. .IP ":ta[!] tag" 16 .B Vi looks in the file named .B tags in the current directory. .B Tags is a file of lines in the format: .sp 1 .ti +8 tag filename \fBvi\fR-search-command .sp 1 If \fBvi\fR finds the tag you specified in the \fB:ta\fR command, it stops editing the current file if necessary and if the current file is up to date on the disk and switches to the file specified and uses the search pattern specified to find the "tagged" item of interest. This is particularly useful when editing multi-file C programs such as the operating system. There is a program called \fBctags\fR which will generate an appropriate \fBtags\fR file for C and f77 programs so that by saying \fB:ta function\fR you will be switched to that function. It could also be useful when editing multi-file documents, though the \fBtags\fR file would have to be generated manually. .LE .NH 1 Special Arrangements for Startup .PP \fBVi\fR takes the value of \fB$TERM\fR and looks up the characteristics of that terminal in the file \fB/etc/termcap\fR. If you don't know \fBvi\fR's name for the terminal you are working on, look in \fB/etc/termcap\fR. .PP When \fBvi\fR starts, it attempts to read the variable EXINIT from your environment.* If that exists, it takes the values in it as the default values for certain of its internal constants. See the section on "Set Values" for further details. If EXINIT doesn't exist you will get all the normal defaults. .FS * On version 6 systems Instead of EXINIT, put the startup commands in the file .exrc in your home directory. .FE .PP Should you inadvertently hang up the phone while inside .B vi , or should the computer crash, all may not be lost. Upon returning to the system, type: .DS vi \-r file .DE This will normally recover the file. If there is more than one temporary file for a specific file name, \fBvi\fR recovers the newest one. You can get an older version by recovering the file more than once. The command "vi -r" without a file name gives you the list of files that were saved in the last system crash (but .I not the file just saved when the phone was hung up). .NH 1 Set Commands .LP \fBVi\fR has a number of internal variables and switches which can be set to achieve special affects. These options come in three forms, those that are switches, which toggle from off to on and back, those that require a numeric value, and those that require an alphanumeric string value. The toggle options are set by a command of the form: .DS :set option .DE and turned off with the command: .DS :set nooption .DE Commands requiring a value are set with a command of the form: .DS :set option=value .DE To display the value of a specific option type: .DS :set option? .DE To display only those that you have changed type: .DS :set .DE and to display the long table of all the settable parameters and their current values type: .DS :set all .DE .PP Most of the options have a long form and an abbreviation. Both are listed in the following table as well as the normal default value. .PP To arrange to have values other than the default used every time you enter .B vi , place the appropriate .B set command in EXINIT in your environment, e.g. .DS EXINIT='set ai aw terse sh=/bin/csh' export EXINIT .DE or .DS setenv EXINIT 'set ai aw terse sh=/bin/csh' .DE for .B sh and .B csh , respectively. These are usually placed in your .profile or .login. If you are running a system without environments (such as version 6) you can place the set command in the file .exrc in your home directory. .VL 16 .IP autoindent\ ai 16 Default: noai Type: toggle .br When in autoindent mode, vi helps you indent code by starting each line in the same column as the preceding line. Tabbing to the right with or <^T> will move this boundary to the right, and it can be moved to the left with <^D>. .IP autoprint\ ap 16 Default: ap Type: toggle .br Causes the current line to be printed after each ex text modifying command. This is not of much interest in the normal \fBvi\fR visual mode. .IP autowrite\ aw 16 Default: noaw type: toggle .br Autowrite causes an automatic write to be done if there are unsaved changes before certain commands which change files or otherwise interact with the outside world. These commands are :!, :tag, :next, :rewind, ^^, and ^]. .IP beautify\ bf 16 Default: nobf Type: toggle .br Causes all control characters except , , and to be discarded. .IP directory\ dir 16 Default: dir=/tmp Type: string .br This is the directory in which \fBvi\fR puts its temporary file. .IP errorbells\ eb 16 Default: noeb Type: toggle .br Error messages are preceded by a . .IP hardtabs\ ht 16 Default: hardtabs=8 Type: numeric .br This option contains the value of hardware tabs in your terminal, or of software tabs expanded by the Unix system. .IP ignorecase\ ic 16 Default: noic Type: toggle .br All upper case characters are mapped to lower case in regular expression matching. .IP lisp 16 Default: nolisp Type: toggle .br Autoindent for \fBlisp\fR code. The commands \fB( ) [[\fR and \fB]]\fR are modified appropriately to affect s-expressions and functions. .IP list 16 Default: nolist Type: toggle .br All printed lines have the and characters displayed visually. .IP magic 16 Default: magic Type: toggle .br Enable the metacharacters for matching. These include \fB. * < > [string] [^string]\fR and \fB[-]\fR. .IP number\ nu 16 Default: nonu Type: toggle .br Each line is displayed with its line number. .IP open 16 Default: open Type: toggle .br When set, prevents entering open or visual modes from ex or edit. Not of interest from vi. .IP optimize\ opt 16 Default: opt Type: toggle .br Basically of use only when using the \fBex\fR capabilities. This option prevents automatic s from taking place, and speeds up output of indented lines, at the expense of losing typeahead on some versions of UNIX. .IP paragraphs\ para 16 Default: para=IPLPPPQPP\ bp Type: string .br Each pair of characters in the string indicate \fBnroff\fR macros which are to be treated as the beginning of a paragraph for the \fB{\fR and \fB}\fR commands. The default string is for the \fB-ms\fR and \fB-mm\fR macros. To indicate one letter \fBnroff\fR macros, such as \fB.P\fR or \fB.H\fR, quote a space in for the second character position. For example: .sp 1 .ti +8 :set paragraphs=P\e bp .sp 1 would cause \fBvi\fR to consider \fB.P\fR and \fB.bp\fR as paragraph delimiters. .IP prompt 16 Default: prompt Type: toggle .br In .B ex command mode the prompt character \fB:\fR will be printed when \fBex\fR is waiting for a command. This is not of interest from vi. .IP redraw 16 Default: noredraw Type: toggle .br On dumb terminals, force the screen to always be up to date, by sending great amounts of output. Useful only at high speeds. .IP report 16 Default: report=5 Type: numeric .br This sets the threshold for the number of lines modified. When more than this number of lines are modified, removed, or yanked, \fBvi\fR will report the number of lines changed at the bottom of the screen. .IP scroll 16 Default: scroll={1/2 window} Type: numeric .br This is the number of lines that the screen scrolls up or down when using the <^U> and <^D> commands. .IP sections 16 Default: sections=SHNHH HU Type: string .br Each two character pair of this string specify \fBnroff\fR macro names which are to be treated as the beginning of a section by the \fB]]\fR and \fB[[\fR commands. The default string is for the \fB-ms\fR and \fB-mm\fR macros. To enter one letter \fBnroff\fR macros, use a quoted space as the second character. See \fBparagraphs\fR for a fuller explanation. .IP shell\ sh 16 Default: sh=from environment SHELL or /bin/sh Type: string .br This is the name of the \fBsh\fR to be used for "escaped" commands. .IP shiftwidth\ sw 16 Default: sw=8 Type: numeric .br This is the number of spaces that a <^T> or <^D> will move over for indenting, and the amount < and > shift by. .IP showmatch\ sm 16 Default: nosm Type: toggle .br When a \fB)\fR or \fB}\fR is typed, show the matching \fB(\fR or \fB{\fR by moving the cursor to it for one second if it is on the current screen. .IP slowopen\ slow 16 Default: terminal dependent Type: toggle .br On terminals that are slow and unintelligent, this option prevents the updating of the screen some of the time to improve speed. .IP tabstop\ ts 16 Default: ts=8 Type: numeric .br s are expanded to boundaries that are multiples of this value. .IP taglength\ tl 16 Default: tl=0 Type: numeric .br If nonzero, tag names are only significant to this many characters. .IP term 16 Default: (from environment \fBTERM\fP, else dumb) Type: string .br This is the terminal and controls the visual displays. It cannot be changed when in "visual" mode, you have to Q to command mode, type a set term command, and do ``vi.'' to get back into visual. Or exit vi, fix $TERM, and reenter. The definitions that drive a particular terminal type are found in the file \fB/etc/termcap\fR. .IP terse 16 Default: terse Type: toggle .br When set, the error diagnostics are short. .IP warn 16 Default: warn Type: toggle .br The user is warned if she/he tries to escape to the shell without writing out the current changes. .IP window 16 Default: window={8 at 600 baud or less, 16 at 1200 baud, and screen size \- 1 at 2400 baud or more} Type: numeric .br This is the number of lines in the window whenever \fBvi\fR must redraw an entire screen. It is useful to make this size smaller if you are on a slow line. .IP w300,\ w1200,\ w9600 .br These set window, but only within the corresponding speed ranges. They are useful in an EXINIT to fine tune window sizes. For example, .DS set w300=4 w1200=12 .DE causes a 4 lines window at speed up to 600 baud, a 12 line window at 1200 baud, and a full screen (the default) at over 1200 baud. .IP wrapscan\ ws 16 Default: ws Type: toggle .br Searches will wrap around the end of the file when is option is set. When it is off, the search will terminate when it reaches the end or the beginning of the file. .IP wrapmargin\ wm 16 Default: wm=0 Type: numeric .br \fBVi\fR will automatically insert a when it finds a natural break point (usually a between words) that occurs within "wm" spaces of the right margin. Therefore with "wm=0" the option is off. Setting it to 10 would mean that any time you are within 10 spaces of the right margin \fBvi\fR would be looking for a or which it could replace with a . This is convenient for people who forget to look at the screen while they type. (In version 3, wrapmargin behaves more like nroff, in that the boundary specified by the distance from the right edge of the screen is taken as the rightmost edge of the area where a break is allowed, instead of the leftmost edge.) .IP writeany\ wa 16 Default: nowa Type: toggle .br \fBVi\fR normally makes a number of checks before it writes out a file. This prevents the user from inadvertently destroying a file. When the "writeany" option is enabled, \fBvi\fR no longer makes these checks. .LE vigor-0.016.orig/docs/USD.doc/vitut/vi.chars0100644000076400007640000006446407103707243017251 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)vi.chars 8.3 (Berkeley) 6/27/96 .\" .bd S 3 .pn 21 .de iP .IP "\fB\\$1\fR" \\$2 .. .SH Appendix: character functions .PP This appendix gives the uses the editor makes of each character. The characters are presented in their order in the \s-2ASCII\s0 character set: Control characters come first, then most special characters, then the digits, upper and then lower case characters. .PP For each character we tell a meaning it has as a command and any meaning it has during an insert. If it has only meaning as a command, then only this is discussed. Section numbers in parentheses indicate where the character is discussed; a `f' after the section number means that the character is mentioned in a footnote. .iP "^@" 15 Not a command character. If typed as the first character of an insertion it is replaced with the last text inserted, and the insert terminates. Only 128 characters are saved from the last insert; if more characters were inserted the mechanism is not available. A \fB^@\fR cannot be part of the file due to the editor implementation (7.5f). .iP "^A" 15 Unused. .iP "^B" 15 Backward window. A count specifies repetition. Two lines of continuity are kept if possible (2.1, 6.1, 7.2). .iP "^C" 15 Unused. .iP "^D" 15 As a command, scrolls down a half-window of text. A count gives the number of (logical) lines to scroll, and is remembered for future \fB^D\fR and \fB^U\fR commands (2.1, 7.2). During an insert, backtabs over \fIautoindent\fR white space at the beginning of a line (6.6, 7.5); this white space cannot be backspaced over. .iP "^E" 15 Exposes one more line below the current screen in the file, leaving the cursor where it is if possible. (Version 3 only.) .iP "^F" 15 Forward window. A count specifies repetition. Two lines of continuity are kept if possible (2.1, 6.1, 7.2). .iP "^G" 15 Equivalent to \fB:f\fR\s-2CR\s0, printing the current file, whether it has been modified, the current line number and the number of lines in the file, and the percentage of the way through the file that you are. .iP "^H (\fR\s-2BS\s0\fP)" 15 Same as .B "left arrow" . (See .B h ). During an insert, eliminates the last input character, backing over it but not erasing it; it remains so you can see what you typed if you wish to type something only slightly different (3.1, 7.5). .iP "^I\ (\fR\s-2TAB\s0\fP)" 15 Not a command character. When inserted it prints as some number of spaces. When the cursor is at a tab character it rests at the last of the spaces which represent the tab. The spacing of tabstops is controlled by the \fItabstop\fR option (4.1, 6.6). .iP "^J\ (\fR\s-2LF\s0\fP)" 15 Same as .B "down arrow" (see .B j ). .iP "^K" 15 Unused. .iP "^L" 15 The \s-2ASCII\s0 formfeed character, this causes the screen to be cleared and redrawn. This is useful after a transmission error, if characters typed by a program other than the editor scramble the screen, or after output is stopped by an interrupt (5.4, 7.2f). .ne 1i .iP "^M\ (\fR\s-2CR\s0\fP)" 15 A carriage return advances to the next line, at the first non-white position in the line. Given a count, it advances that many lines (2.3). During an insert, a \s-2CR\s0 causes the insert to continue onto another line (3.1). .iP "^N" 15 Same as .B "down arrow" (see .B j ). .iP "^O" 15 Unused. .iP "^P" 15 Same as .B "up arrow" (see .B k ). .iP "^Q" 15 Not a command character. In input mode, .B ^Q quotes the next character, the same as .B ^V , except that some teletype drivers will eat the .B ^Q so that the editor never sees it. .iP "^R" 15 Redraws the current screen, eliminating logical lines not corresponding to physical lines (lines with only a single @ character on them). On hardcopy terminals in \fIopen\fR mode, retypes the current line (5.4, 7.2, 7.8). .iP "^S" 15 Unused. Some teletype drivers use .B ^S to suspend output until .B ^Q is pressed. .iP "^T" 15 Not a command character. During an insert, with \fIautoindent\fR set and at the beginning of the line, inserts \fIshiftwidth\fR white space. .iP "^U" 15 Scrolls the screen up, inverting \fB^D\fR which scrolls down. Counts work as they do for \fB^D\fR, and the previous scroll amount is common to both. On a dumb terminal, \fB^U\fR will often necessitate clearing and redrawing the screen further back in the file (2.1, 7.2). .iP "^V" 15 Not a command character. In input mode, quotes the next character so that it is possible to insert non-printing and special characters into the file (4.2, 7.5). .iP "^W" 15 Not a command character. During an insert, backs up as \fBb\fR would in command mode; the deleted characters remain on the display (see \fB^H\fR) (7.5). .iP "^X" 15 Unused. .iP "^Y" 15 Exposes one more line above the current screen, leaving the cursor where it is if possible. (No mnemonic value for this key; however, it is next to \fB^U\fR which scrolls up a bunch.) (Version 3 only.) .iP "^Z" 15 If supported by the Unix system, stops the editor, exiting to the top level shell. Same as \fB:stop\fP\s-2CR\s0. Otherwise, unused. .iP "^[\ (\fR\s-2ESC\s0\fP)" 15 Cancels a partially formed command, such as a \fBz\fR when no following character has yet been given; terminates inputs on the last line (read by commands such as \fB: /\fR and \fB?\fR); ends insertions of new text into the buffer. If an \s-2ESC\s0 is given when quiescent in command state, the editor rings the bell or flashes the screen. You can thus hit \s-2ESC\s0 if you don't know what is happening till the editor rings the bell. If you don't know if you are in insert mode you can type \s-2ESC\s0\fBa\fR, and then material to be input; the material will be inserted correctly whether or not you were in insert mode when you started (1.5, 3.1, 7.5). .iP "^\e" 15 Unused. .iP "^]" 15 Searches for the word which is after the cursor as a tag. Equivalent to typing \fB:ta\fR, this word, and then a \s-2CR\s0. Mnemonically, this command is ``go right to'' (7.3). .iP "^\(ua" 15 Equivalent to \fB:e #\fR\s-2CR\s0, returning to the previous position in the last edited file, or editing a file which you specified if you got a `No write since last change diagnostic' and do not want to have to type the file name again (7.3). (You have to do a \fB:w\fR before \fB^\(ua\fR will work in this case. If you do not wish to write the file you should do \fB:e!\ #\fR\s-2CR\s0 instead.) .iP "^_" 15 Unused. Reserved as the command character for the Tektronix 4025 and 4027 terminal. .iP "\fR\s-2SPACE\s0\fP" 15 Same as .B "right arrow" (see .B l ). .iP "!" 15 An operator, which processes lines from the buffer with reformatting commands. Follow \fB!\fR with the object to be processed, and then the command name terminated by \s-2CR\s0. Doubling \fB!\fR and preceding it by a count causes count lines to be filtered; otherwise the count is passed on to the object after the \fB!\fR. Thus \fB2!}\fR\fIfmt\fR\s-2CR\s0 reformats the next two paragraphs by running them through the program \fIfmt\fR. If you are working on \s-2LISP\s0, the command \fB!%\fR\fIgrind\fR\s-2CR\s0,* .FS *Both .I fmt and .I grind are Berkeley programs and may not be present at all installations. .FE given at the beginning of a function, will run the text of the function through the \s-2LISP\s0 grinder (6.7, 7.3). To read a file or the output of a command into the buffer use \fB:r\fR (7.3). To simply execute a command use \fB:!\fR (7.3). .tr " .iP  15 Precedes a named buffer specification. There are named buffers \fB1\-9\fR used for saving deleted text and named buffers \fBa\-z\fR into which you can place text (4.3, 6.3) .tr  .iP "#" 15 The macro character which, when followed by a number, will substitute for a function key on terminals without function keys (6.9). In input mode, if this is your erase character, it will delete the last character you typed in input mode, and must be preceded with a \fB\e\fR to insert it, since it normally backs over the last input character you gave. .iP "$" 15 Moves to the end of the current line. If you \fB:se list\fR\s-2CR\s0, then the end of each line will be shown by printing a \fB$\fR after the end of the displayed text in the line. Given a count, advances to the count'th following end of line; thus \fB2$\fR advances to the end of the following line. .iP "%" 15 Moves to the parenthesis or brace \fB{ }\fR which balances the parenthesis or brace at the current cursor position. .iP "&" 15 A synonym for \fB:&\fR\s-2CR\s0, by analogy with the .I ex .B & command. .iP "\(aa" 15 When followed by a \fB\(aa\fR returns to the previous context at the beginning of a line. The previous context is set whenever the current line is moved in a non-relative way. When followed by a letter \fBa\fR\-\fBz\fR, returns to the line which was marked with this letter with a \fBm\fR command, at the first non-white character in the line. (2.2, 5.3). When used with an operator such as \fBd\fR, the operation takes place over complete lines; if you use \fB\(ga\fR, the operation takes place from the exact marked place to the current cursor position within the line. .iP "(" 15 Retreats to the beginning of a sentence, or to the beginning of a \s-2LISP\s0 s-expression if the \fIlisp\fR option is set. A sentence ends at a \fB. !\fR or \fB?\fR which is followed by either the end of a line or by two spaces. Any number of closing \fB) ] "\fR and \fB\(aa\fR characters may appear after the \fB. !\fR or \fB?\fR, and before the spaces or end of line. Sentences also begin at paragraph and section boundaries (see \fB{\fR and \fB[[\fR below). A count advances that many sentences (4.2, 6.8). .iP ")" 15 Advances to the beginning of a sentence. A count repeats the effect. See \fB(\fR above for the definition of a sentence (4.2, 6.8). .iP "*" 15 Unused. .iP "+" 15 Same as \s-2CR\s0 when used as a command. .iP "," 15 Reverse of the last \fBf F t\fR or \fBT\fR command, looking the other way in the current line. Especially useful after hitting too many \fB;\fR characters. A count repeats the search. .iP "\-" 15 Retreats to the previous line at the first non-white character. This is the inverse of \fB+\fR and \s-2RETURN\s0. If the line moved to is not on the screen, the screen is scrolled, or cleared and redrawn if this is not possible. If a large amount of scrolling would be required the screen is also cleared and redrawn, with the current line at the center (2.3). .iP "\&." 15 Repeats the last command which changed the buffer. Especially useful when deleting words or lines; you can delete some words/lines and then hit \fB.\fR to delete more and more words/lines. Given a count, it passes it on to the command being repeated. Thus after a \fB2dw\fR, \fB3.\fR deletes three words (3.3, 6.3, 7.2, 7.4). .iP "/" 15 Reads a string from the last line on the screen, and scans forward for the next occurrence of this string. The normal input editing sequences may be used during the input on the bottom line; an returns to command state without ever searching. The search begins when you hit \s-2CR\s0 to terminate the pattern; the cursor moves to the beginning of the last line to indicate that the search is in progress; the search may then be terminated with a \s-2DEL\s0 or \s-2RUB\s0, or by backspacing when at the beginning of the bottom line, returning the cursor to its initial position. Searches normally wrap end-around to find a string anywhere in the buffer. .IP When used with an operator the enclosed region is normally affected. By mentioning an offset from the line matched by the pattern you can force whole lines to be affected. To do this give a pattern with a closing a closing \fB/\fR and then an offset \fB+\fR\fIn\fR or \fB\-\fR\fIn\fR. .IP To include the character \fB/\fR in the search string, you must escape it with a preceding \fB\e\fR. A \fB\(ua\fR at the beginning of the pattern forces the match to occur at the beginning of a line only; this speeds the search. A \fB$\fR at the end of the pattern forces the match to occur at the end of a line only. More extended pattern matching is available, see section 7.4; unless you set \fBnomagic\fR in your \fI\&.exrc\fR file you will have to preceed the characters \fB. [ *\fR and \fB~\fR in the search pattern with a \fB\e\fR to get them to work as you would naively expect (1.5, 2,2, 6.1, 7.2, 7.4). .iP "0" 15 Moves to the first character on the current line. Also used, in forming numbers, after an initial \fB1\fR\-\fB9\fR. .iP "1\-9" 15 Used to form numeric arguments to commands (2.3, 7.2). .iP ":" 15 A prefix to a set of commands for file and option manipulation and escapes to the system. Input is given on the bottom line and terminated with an \s-2CR\s0, and the command then executed. You can return to where you were by hitting \s-2DEL\s0 or \s-2RUB\s0 if you hit \fB:\fR accidentally (see primarily 6.2 and 7.3). .iP ";" 15 Repeats the last single character find which used \fBf F t\fR or \fBT\fR. A count iterates the basic scan (4.1). .iP "<" 15 An operator which shifts lines left one \fIshiftwidth\fR, normally 8 spaces. Like all operators, affects lines when repeated, as in \fB<<\fR. Counts are passed through to the basic object, thus \fB3<<\fR shifts three lines (6.6, 7.2). .iP "=" 15 Reindents line for \s-2LISP\s0, as though they were typed in with \fIlisp\fR and \fIautoindent\fR set (6.8). .iP ">" 15 An operator which shifts lines right one \fIshiftwidth\fR, normally 8 spaces. Affects lines when repeated as in \fB>>\fR. Counts repeat the basic object (6.6, 7.2). .iP "?" 15 Scans backwards, the opposite of \fB/\fR. See the \fB/\fR description above for details on scanning (2.2, 6.1, 7.4). .iP "@" 15 A macro character (6.9). If this is your kill character, you must escape it with a \e to type it in during input mode, as it normally backs over the input you have given on the current line (3.1, 3.4, 7.5). .iP "A" 15 Appends at the end of line, a synonym for \fB$a\fR (7.2). .iP "B" 15 Backs up a word, where words are composed of non-blank sequences, placing the cursor at the beginning of the word. A count repeats the effect (2.4). .iP "C" 15 Changes the rest of the text on the current line; a synonym for \fBc$\fR. .iP "D" 15 Deletes the rest of the text on the current line; a synonym for \fBd$\fR. .iP "E" 15 Moves forward to the end of a word, defined as blanks and non-blanks, like \fBB\fR and \fBW\fR. A count repeats the effect. .iP "F" 15 Finds a single following character, backwards in the current line. A count repeats this search that many times (4.1). .iP "G" 15 Goes to the line number given as preceding argument, or the end of the file if no preceding count is given. The screen is redrawn with the new current line in the center if necessary (7.2). .iP "H" 15 .B "Home arrow" . Homes the cursor to the top line on the screen. If a count is given, then the cursor is moved to the count'th line on the screen. In any case the cursor is moved to the first non-white character on the line. If used as the target of an operator, full lines are affected (2.3, 3.2). .iP "I" 15 Inserts at the beginning of a line; a synonym for \fB\(uai\fR. .iP "J" 15 Joins together lines, supplying appropriate white space: one space between words, two spaces after a \fB.\fR, and no spaces at all if the first character of the joined on line is \fB)\fR. A count causes that many lines to be joined rather than the default two (6.5, 7.1f). .iP "K" 15 Unused. .iP "L" 15 Moves the cursor to the first non-white character of the last line on the screen. With a count, to the first non-white of the count'th line from the bottom. Operators affect whole lines when used with \fBL\fR (2.3). .iP "M" 15 Moves the cursor to the middle line on the screen, at the first non-white position on the line (2.3). .iP "N" 15 Scans for the next match of the last pattern given to \fB/\fR or \fB?\fR, but in the reverse direction; this is the reverse of \fBn\fR. .iP "O" 15 Opens a new line above the current line and inputs text there up to an \s-2ESC\s0. A count can be used on dumb terminals to specify a number of lines to be opened; this is generally obsolete, as the \fIslowopen\fR option works better (3.1). .iP "P" 15 Puts the last deleted text back before/above the cursor. The text goes back as whole lines above the cursor if it was deleted as whole lines. Otherwise the text is inserted between the characters before and at the cursor. May be preceded by a named buffer specification \fB"\fR\fIx\fR to retrieve the contents of the buffer; buffers \fB1\fR\-\fB9\fR contain deleted material, buffers \fBa\fR\-\fBz\fR are available for general use (6.3). .iP "Q" 15 Quits from \fIvi\fR to \fIex\fR command mode. In this mode, whole lines form commands, ending with a \s-2RETURN\s0. You can give all the \fB:\fR commands; the editor supplies the \fB:\fR as a prompt (7.7). .iP "R" 15 Replaces characters on the screen with characters you type (overlay fashion). Terminates with an \s-2ESC\s0. .iP "S" 15 Changes whole lines, a synonym for \fBcc\fR. A count substitutes for that many lines. The lines are saved in the numeric buffers, and erased on the screen before the substitution begins. .iP "T" 15 Takes a single following character, locates the character before the cursor in the current line, and places the cursor just after that character. A count repeats the effect. Most useful with operators such as \fBd\fR (4.1). .iP "U" 15 Restores the current line to its state before you started changing it (3.5). .iP "V" 15 Unused. .iP "W" 15 Moves forward to the beginning of a word in the current line, where words are defined as sequences of blank/non-blank characters. A count repeats the effect (2.4). .iP "X" 15 Deletes the character before the cursor. A count repeats the effect, but only characters on the current line are deleted. .iP "Y" 15 Yanks a copy of the current line into the unnamed buffer, to be put back by a later \fBp\fR or \fBP\fR; a very useful synonym for \fByy\fR. A count yanks that many lines. May be preceded by a buffer name to put lines in that buffer (7.4). .iP "ZZ" 15 Exits the editor. (Same as \fB:x\fP\s-2CR\s0.) If any changes have been made, the buffer is written out to the current file. Then the editor quits. .iP "[[" 15 Backs up to the previous section boundary. A section begins at each macro in the \fIsections\fR option, normally a `.NH' or `.SH' and also at lines which which start with a formfeed \fB^L\fR. Lines beginning with \fB{\fR also stop \fB[[\fR; this makes it useful for looking backwards, a function at a time, in C programs. If the option \fIlisp\fR is set, stops at each \fB(\fR at the beginning of a line, and is thus useful for moving backwards at the top level \s-2LISP\s0 objects. (4.2, 6.1, 6.6, 7.2). .iP "\e" 15 Unused. .iP "]]" 15 Forward to a section boundary, see \fB[[\fR for a definition (4.2, 6.1, 6.6, 7.2). .iP "\(ua" 15 Moves to the first non-white position on the current line (4.4). .iP "_" 15 Unused. .iP "\(ga" 15 When followed by a \fB\(ga\fR returns to the previous context. The previous context is set whenever the current line is moved in a non-relative way. When followed by a letter \fBa\fR\-\fBz\fR, returns to the position which was marked with this letter with a \fBm\fR command. When used with an operator such as \fBd\fR, the operation takes place from the exact marked place to the current position within the line; if you use \fB\(aa\fR, the operation takes place over complete lines (2.2, 5.3). .iP "a" 15 Appends arbitrary text after the current cursor position; the insert can continue onto multiple lines by using \s-2RETURN\s0 within the insert. A count causes the inserted text to be replicated, but only if the inserted text is all on one line. The insertion terminates with an \s-2ESC\s0 (3.1, 7.2). .iP "b" 15 Backs up to the beginning of a word in the current line. A word is a sequence of alphanumerics, or a sequence of special characters. A count repeats the effect (2.4). .iP "c" 15 An operator which changes the following object, replacing it with the following input text up to an \s-2ESC\s0. If more than part of a single line is affected, the text which is changed away is saved in the numeric named buffers. If only part of the current line is affected, then the last character to be changed away is marked with a \fB$\fR. A count causes that many objects to be affected, thus both \fB3c)\fR and \fBc3)\fR change the following three sentences (7.4). .iP "d" 15 An operator which deletes the following object. If more than part of a line is affected, the text is saved in the numeric buffers. A count causes that many objects to be affected; thus \fB3dw\fR is the same as \fBd3w\fR (3.3, 3.4, 4.1, 7.4). .iP "e" 15 Advances to the end of the next word, defined as for \fBb\fR and \fBw\fR. A count repeats the effect (2.4, 3.1). .iP "f" 15 Finds the first instance of the next character following the cursor on the current line. A count repeats the find (4.1). .iP "g" 15 Unused. .sp Arrow keys .B h , .B j , .B k , .B l , and .B H . .iP "h" 15 .B "Left arrow" . Moves the cursor one character to the left. Like the other arrow keys, either .B h , the .B "left arrow" key, or one of the synonyms (\fB^H\fP) has the same effect. On v2 editors, arrow keys on certain kinds of terminals (those which send escape sequences, such as vt52, c100, or hp) cannot be used. A count repeats the effect (3.1, 7.5). .iP "i" 15 Inserts text before the cursor, otherwise like \fBa\fR (7.2). .iP "j" 15 .B "Down arrow" . Moves the cursor one line down in the same column. If the position does not exist, .I vi comes as close as possible to the same column. Synonyms include .B ^J (linefeed) and .B ^N . .iP "k" 15 .B "Up arrow" . Moves the cursor one line up. .B ^P is a synonym. .iP "l" 15 .B "Right arrow" . Moves the cursor one character to the right. \s-2SPACE\s0 is a synonym. .iP "m" 15 Marks the current position of the cursor in the mark register which is specified by the next character \fBa\fR\-\fBz\fR. Return to this position or use with an operator using \fB\(ga\fR or \fB\(aa\fR (5.3). .iP "n" 15 Repeats the last \fB/\fR or \fB?\fR scanning commands (2.2). .iP "o" 15 Opens new lines below the current line; otherwise like \fBO\fR (3.1). .iP "p" 15 Puts text after/below the cursor; otherwise like \fBP\fR (6.3). .iP "q" 15 Unused. .iP "r" 15 Replaces the single character at the cursor with a single character you type. The new character may be a \s-2RETURN\s0; this is the easiest way to split lines. A count replaces each of the following count characters with the single character given; see \fBR\fR above which is the more usually useful iteration of \fBr\fR (3.2). .iP "s" 15 Changes the single character under the cursor to the text which follows up to an \s-2ESC\s0; given a count, that many characters from the current line are changed. The last character to be changed is marked with \fB$\fR as in \fBc\fR (3.2). .iP "t" 15 Advances the cursor upto the character before the next character typed. Most useful with operators such as \fBd\fR and \fBc\fR to delete the characters up to a following character. You can use \fB.\fR to delete more if this doesn't delete enough the first time (4.1). .iP "u" 15 Undoes the last change made to the current buffer. If repeated, will alternate between these two states, thus is its own inverse. When used after an insert which inserted text on more than one line, the lines are saved in the numeric named buffers (3.5). .iP "v" 15 Unused. .iP "w" 15 Advances to the beginning of the next word, as defined by \fBb\fR (2.4). .iP "x" 15 Deletes the single character under the cursor. With a count deletes deletes that many characters forward from the cursor position, but only on the current line (6.5). .iP "y" 15 An operator, yanks the following object into the unnamed temporary buffer. If preceded by a named buffer specification, \fB"\fR\fIx\fR, the text is placed in that buffer also. Text can be recovered by a later \fBp\fR or \fBP\fR (7.4). .iP "z" 15 Redraws the screen with the current line placed as specified by the following character: \s-2RETURN\s0 specifies the top of the screen, \fB.\fR the center of the screen, and \fB\-\fR at the bottom of the screen. A count may be given after the \fBz\fR and before the following character to specify the new screen size for the redraw. A count before the \fBz\fR gives the number of the line to place in the center of the screen instead of the default current line. (5.4) .iP "{" 15 Retreats to the beginning of the beginning of the preceding paragraph. A paragraph begins at each macro in the \fIparagraphs\fR option, normally `.IP', `.LP', `.PP', `.QP' and `.bp'. A paragraph also begins after a completely empty line, and at each section boundary (see \fB[[\fR above) (4.2, 6.8, 7.6). .iP "|" 15 Places the cursor on the character in the column specified by the count (7.1, 7.2). .iP "}" 15 Advances to the beginning of the next paragraph. See \fB{\fR for the definition of paragraph (4.2, 6.8, 7.6). .iP "~" 15 Unused. .iP "^?\ (\s-2\fRDEL\fP\s0)" 15 Interrupts the editor, returning it to command accepting state (1.5, 7.5) .bp \&. vigor-0.016.orig/docs/USD.doc/vitut/vi.in0100644000076400007640000023313307103707243016546 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)vi.in 8.5 (Berkeley) 8/18/96 .\" .nr LL 6.5i .nr FL 6.5i .EH 'USD:11-%''An Introduction to Display Editing with Vi' .OH 'An Introduction to Display Editing with Vi''USD:11-%' .bd S 3 .if t .ds dg \(dg .if n .ds dg + .if t .ds dd \(dd .if n .ds dd ++ .\".RP .TL An Introduction to Display Editing with Vi .AU William Joy .AU Mark Horton .AI Computer Science Division Department of Electrical Engineering and Computer Science University of California, Berkeley Berkeley, Ca. 94720 .AB .PP .I Vi (visual) is a display oriented interactive text editor. When using .I vi the screen of your terminal acts as a window into the file which you are editing. Changes which you make to the file are reflected in what you see. .PP Using .I vi you can insert new text any place in the file quite easily. Most of the commands to .I vi move the cursor around in the file. There are commands to move the cursor forward and backward in units of characters, words, sentences and paragraphs. A small set of operators, like .B d for delete and .B c for change, are combined with the motion commands to form operations such as delete word or change paragraph, in a simple and natural way. This regularity and the mnemonic assignment of commands to keys makes the editor command set easy to remember and to use. .PP .I Vi will work on a large number of display terminals, and new terminals are easily driven after editing a terminal description file. While it is advantageous to have an intelligent terminal which can locally insert and delete lines and characters from the display, the editor will function quite well on dumb terminals over slow phone lines. The editor makes allowance for the low bandwidth in these situations and uses smaller window sizes and different display updating algorithms to make best use of the limited speed available. .PP It is also possible to use the command set of .I vi on hardcopy terminals, storage tubes and ``glass tty's'' using a one line editing window; thus .I vi's command set is available on all terminals. The full command set of the more traditional, line oriented editor .I ex is available within .I vi; it is quite simple to switch between the two modes of editing. .AE .NH 1 Getting started .PP .FS The financial support of an \s-2IBM\s0 Graduate Fellowship and the National Science Foundation under grants MCS74-07644-A03 and MCS78-07291 is gratefully acknowledged. .FE This document provides a quick introduction to .I vi. (Pronounced \fIvee-eye\fP.) You should be running .I vi on a file you are familiar with while you are reading this. The first part of this document (sections 1 through 5) describes the basics of using .I vi. Some topics of special interest are presented in section 6, and some nitty-gritty details of how the editor functions are saved for section 7 to avoid cluttering the presentation here. .PP There is also a short appendix here, which gives for each character the special meanings which this character has in \fIvi\fR. Attached to this document should be a quick reference card. This card summarizes the commands of .I vi in a very compact format. You should have the card handy while you are learning .I vi. .NH 2 Specifying terminal type .PP Before you can start .I vi you must tell the system what kind of terminal you are using. Here is a (necessarily incomplete) list of terminal type codes. If your terminal does not appear here, you should consult with one of the staff members on your system to find out the code for your terminal. If your terminal does not have a code, one can be assigned and a description for the terminal can be created. .LP .TS center; ab ab ab a a a. Code Full name Type _ 2621 Hewlett-Packard 2621A/P Intelligent 2645 Hewlett-Packard 264x Intelligent act4 Microterm ACT-IV Dumb act5 Microterm ACT-V Dumb adm3a Lear Siegler ADM-3a Dumb adm31 Lear Siegler ADM-31 Intelligent c100 Human Design Concept 100 Intelligent dm1520 Datamedia 1520 Dumb dm2500 Datamedia 2500 Intelligent dm3025 Datamedia 3025 Intelligent fox Perkin-Elmer Fox Dumb h1500 Hazeltine 1500 Intelligent h19 Heathkit h19 Intelligent i100 Infoton 100 Intelligent mime Imitating a smart act4 Intelligent t1061 Teleray 1061 Intelligent vt52 Dec VT-52 Dumb .TE .PP Suppose for example that you have a Hewlett-Packard HP2621A terminal. The code used by the system for this terminal is `2621'. In this case you can use one of the following commands to tell the system the type of your terminal: .DS % \fBsetenv TERM\fP 2621 .DE This command works with the .I csh shell. If you are using the standard Bourne shell .I sh then you should give the commands .DS $ \fBTERM=\fP2621 $ \fBexport TERM\fP .DE .PP If you want to arrange to have your terminal type set up automatically when you log in, you can use the .I tset program. If you dial in on a .I mime , but often use hardwired ports, a typical line for your .I .login file (if you use csh) would be .DS \fBsetenv TERM \(gatset\fP \- \-d mime\(ga .DE or for your .I .profile file (if you use sh) .DS \fBTERM=\(gatse\fPt \- \-d mime\(ga .DE .I Tset knows which terminals are hardwired to each port and needs only to be told that when you dial in you are probably on a .I mime . .I Tset is usually used to change the erase and kill characters, too. .NH 2 Editing a file .PP After telling the system which kind of terminal you have, you should make a copy of a file you are familiar with, and run .I vi on this file, giving the command .DS % \fBvi\fR \fIname\fR .DE replacing \fIname\fR with the name of the copy file you just created. The screen should clear and the text of your file should appear on the screen. If something else happens refer to the footnote.\*(dd .FS \*(dd If you gave the system an incorrect terminal type code then the editor may have just made a mess out of your screen. This happens when it sends control codes for one kind of terminal to some other kind of terminal. In this case hit the keys \fB:q\fR (colon and the q key) and then hit the \s-2RETURN\s0 key. This should get you back to the command level interpreter. Figure out what you did wrong (ask someone else if necessary) and try again. Another thing which can go wrong is that you typed the wrong file name and the editor just printed an error diagnostic. In this case you should follow the above procedure for getting out of the editor, and try again this time spelling the file name correctly. If the editor doesn't seem to respond to the commands which you type here, try sending an interrupt to it by hitting the \s-2DEL\s0 or \s-2RUB\s0 key on your terminal, and then hitting the \fB:q\fR command again followed by a carriage return. .sp .FE .NH 2 The editor's copy: the buffer .PP The editor does not directly modify the file which you are editing. Rather, the editor makes a copy of this file, in a place called the .I buffer, and remembers the file's name. You do not affect the contents of the file unless and until you write the changes you make back into the original file. .NH 2 Notational conventions .PP In our examples, input which must be typed as is will be presented in \fBbold face\fR. Text which should be replaced with appropriate input will be given in \fIitalics\fR. We will represent special characters in \s-2SMALL CAPITALS\s0. .NH 2 Arrow keys .PP The editor command set is independent of the terminal you are using. On most terminals with cursor positioning keys, these keys will also work within the editor. If you don't have cursor positioning keys, or even if you do, you can use the \fBh j k\fR and \fBl\fR keys as cursor positioning keys (these are labelled with arrows on an .I adm3a).* .PP (Particular note for the HP2621: on this terminal the function keys must be \fIshifted\fR (ick) to send to the machine, otherwise they only act locally. Unshifted use will leave the cursor positioned incorrectly.) .FS * As we will see later, .I h moves back to the left (like control-h which is a backspace), .I j moves down (in the same column), .I k moves up (in the same column), and .I l moves to the right. .FE .NH 2 Special characters: \s-2ESC\s0, \s-2CR\s0 and \s-2DEL\s0 .PP Several of these special characters are very important, so be sure to find them right now. Look on your keyboard for a key labelled \s-2ESC\s0 or \s-2ALT\s0. It should be near the upper left corner of your terminal. Try hitting this key a few times. The editor will ring the bell to indicate that it is in a quiescent state.\*(dd .FS \*(dd On smart terminals where it is possible, the editor will quietly flash the screen rather than ringing the bell. .FE Partially formed commands are cancelled by \s-2ESC\s0, and when you insert text in the file you end the text insertion with \s-2ESC\s0. This key is a fairly harmless one to hit, so you can just hit it if you don't know what is going on until the editor rings the bell. .PP The \s-2CR\s0 or \s-2RETURN\s0 key is important because it is used to terminate certain commands. It is usually at the right side of the keyboard, and is the same command used at the end of each shell command. .PP Another very useful key is the \s-2DEL\s0 or \s-2RUB\s0 key, which generates an interrupt, telling the editor to stop what it is doing. It is a forceful way of making the editor listen to you, or to return it to the quiescent state if you don't know or don't like what is going on. Try hitting the `/' key on your terminal. This key is used when you want to specify a string to be searched for. The cursor should now be positioned at the bottom line of the terminal after a `/' printed as a prompt. You can get the cursor back to the current position by hitting the \s-2DEL\s0 or \s-2RUB\s0 key; try this now.* .FS * Backspacing over the `/' will also cancel the search. .FE From now on we will simply refer to hitting the \s-2DEL\s0 or \s-2RUB\s0 key as ``sending an interrupt.''** .FS ** On some systems, this interruptibility comes at a price: you cannot type ahead when the editor is computing with the cursor on the bottom line. .FE .PP The editor often echoes your commands on the last line of the terminal. If the cursor is on the first position of this last line, then the editor is performing a computation, such as computing a new position in the file after a search or running a command to reformat part of the buffer. When this is happening you can stop the editor by sending an interrupt. .NH 2 Getting out of the editor .PP After you have worked with this introduction for a while, and you wish to do something else, you can give the command \fBZZ\fP to the editor. This will write the contents of the editor's buffer back into the file you are editing, if you made any changes, and then quit from the editor. You can also end an editor session by giving the command \fB:q!\fR\s-2CR\s0;\*(dg .FS \*(dg All commands which read from the last display line can also be terminated with a \s-2ESC\s0 as well as an \s-2CR\s0. .FE this is a dangerous but occasionally essential command which ends the editor session and discards all your changes. You need to know about this command in case you change the editor's copy of a file you wish only to look at. Be very careful not to give this command when you really want to save the changes you have made. .NH 1 Moving around in the file .NH 2 Scrolling and paging .PP The editor has a number of commands for moving around in the file. The most useful of these is generated by hitting the control and D keys at the same time, a control-D or `^D'. We will use this two character notation for referring to these control keys from now on. You may have a key labelled `^' on your terminal. This key will be represented as `\(ua' in this document; `^' is exclusively used as part of the `^x' notation for control characters.\*(dd .FS \*(dd If you don't have a `^' key on your terminal then there is probably a key labelled `\(ua'; in any case these characters are one and the same. .FE .PP As you know now if you tried hitting \fB^D\fR, this command scrolls down in the file. The \fBD\fR thus stands for down. Many editor commands are mnemonic and this makes them much easier to remember. For instance the command to scroll up is \fB^U\fR. Many dumb terminals can't scroll up at all, in which case hitting \fB^U\fR clears the screen and refreshes it with a line which is farther back in the file at the top. .PP If you want to see more of the file below where you are, you can hit \fB^E\fR to expose one more line at the bottom of the screen, leaving the cursor where it is. The command \fB^Y\fR (which is hopelessly non-mnemonic, but next to \fB^U\fR on the keyboard) exposes one more line at the top of the screen. .PP There are other ways to move around in the file; the keys \fB^F\fR and \fB^B\fR move forward and backward a page, keeping a couple of lines of continuity between screens so that it is possible to read through a file using these rather than \fB^D\fR and \fB^U\fR if you wish. .PP Notice the difference between scrolling and paging. If you are trying to read the text in a file, hitting \fB^F\fR to move forward a page will leave you only a little context to look back at. Scrolling on the other hand leaves more context, and happens more smoothly. You can continue to read the text as scrolling is taking place. .NH 2 Searching, goto, and previous context .PP Another way to position yourself in the file is by giving the editor a string to search for. Type the character \fB/\fR followed by a string of characters terminated by \s-2CR\s0. The editor will position the cursor at the next occurrence of this string. Try hitting \fBn\fR to then go to the next occurrence of this string. The character \fB?\fR will search backwards from where you are, and is otherwise like \fB/\fR.\*(dg .FS \*(dg These searches will normally wrap around the end of the file, and thus find the string even if it is not on a line in the direction you search provided it is anywhere else in the file. You can disable this wraparound in scans by giving the command \fB:se nowrapscan\fR\s-2CR\s0, or more briefly \fB:se nows\fR\s-2CR\s0. .FE .PP If the search string you give the editor is not present in the file the editor will print a diagnostic on the last line of the screen, and the cursor will be returned to its initial position. .PP If you wish the search to match only at the beginning of a line, begin the search string with an \fB\(ua\fR. To match only at the end of a line, end the search string with a \fB$\fR. Thus \fB/\(uasearch\fR\s-2CR\s0 will search for the word `search' at the beginning of a line, and \fB/last$\fR\s-2CR\s0 searches for the word `last' at the end of a line.* .FS *Actually, the string you give to search for here can be a .I "regular expression" in the sense of the editors .I ex (1) and .I ed (1). If you don't wish to learn about this yet, you can disable this more general facility by doing \fB:se\ nomagic\fR\s-2CR\s0; by putting this command in EXINIT in your environment, you can have this always be in effect (more about .I EXINIT later.) .FE .PP The command \fBG\fR, when preceded by a number will position the cursor at that line in the file. Thus \fB1G\fR will move the cursor to the first line of the file. If you give \fBG\fR no count, then it moves to the end of the file. .PP If you are near the end of the file, and the last line is not at the bottom of the screen, the editor will place only the character `~' on each remaining line. This indicates that the last line in the file is on the screen; that is, the `~' lines are past the end of the file. .PP You can find out the state of the file you are editing by typing a \fB^G\fR. The editor will show you the name of the file you are editing, the number of the current line, the number of lines in the buffer, and the percentage of the way through the buffer which you are. Try doing this now, and remember the number of the line you are on. Give a \fBG\fR command to get to the end and then another \fBG\fR command to get back where you were. .PP You can also get back to a previous position by using the command \fB\(ga\(ga\fR (two back quotes). This is often more convenient than \fBG\fR because it requires no advance preparation. Try giving a \fBG\fR or a search with \fB/\fR or \fB?\fR and then a \fB\(ga\(ga\fR to get back to where you were. If you accidentally hit \fBn\fR or any command which moves you far away from a context of interest, you can quickly get back by hitting \fB\(ga\(ga\fR. .NH 2 Moving around on the screen .PP Now try just moving the cursor around on the screen. If your terminal has arrow keys (4 or 5 keys with arrows going in each direction) try them and convince yourself that they work. If you don't have working arrow keys, you can always use .B h , .B j , .B k , and .B l . Experienced users of .I vi prefer these keys to arrow keys, because they are usually right underneath their fingers. .PP Hit the \fB+\fR key. Each time you do, notice that the cursor advances to the next line in the file, at the first non-white position on the line. The \fB\-\fR key is like \fB+\fR but goes the other way. .PP These are very common keys for moving up and down lines in the file. Notice that if you go off the bottom or top with these keys then the screen will scroll down (and up if possible) to bring a line at a time into view. The \s-2RETURN\s0 key has the same effect as the \fB+\fR key. .PP .I Vi also has commands to take you to the top, middle and bottom of the screen. \fBH\fR will take you to the top (home) line on the screen. Try preceding it with a number as in \fB3H\fR. This will take you to the third line on the screen. Many .I vi commands take preceding numbers and do interesting things with them. Try \fBM\fR, which takes you to the middle line on the screen, and \fBL\fR, which takes you to the last line on the screen. \fBL\fR also takes counts, thus \fB5L\fR will take you to the fifth line from the bottom. .NH 2 Moving within a line .PP Now try picking a word on some line on the screen, not the first word on the line. move the cursor using \s-2RETURN\s0 and \fB\-\fR to be on the line where the word is. Try hitting the \fBw\fR key. This will advance the cursor to the next word on the line. Try hitting the \fBb\fR key to back up words in the line. Also try the \fBe\fR key which advances you to the end of the current word rather than to the beginning of the next word. Also try \s-2SPACE\s0 (the space bar) which moves right one character and the \s-2BS\s0 (backspace or \fB^H\fR) key which moves left one character. The key \fBh\fR works as \fB^H\fR does and is useful if you don't have a \s-2BS\s0 key. (Also, as noted just above, \fBl\fR will move to the right.) .PP If the line had punctuation in it you may have noticed that that the \fBw\fR and \fBb\fR keys stopped at each group of punctuation. You can also go back and forwards words without stopping at punctuation by using \fBW\fR and \fBB\fR rather than the lower case equivalents. Think of these as bigger words. Try these on a few lines with punctuation to see how they differ from the lower case \fBw\fR and \fBb\fR. .PP The word keys wrap around the end of line, rather than stopping at the end. Try moving to a word on a line below where you are by repeatedly hitting \fBw\fR. .NH 2 Summary .IP .TS lw(.50i)b a. \fR\s-2SPACE\s0\fP advance the cursor one position ^B backwards to previous page ^D scrolls down in the file ^E exposes another line at the bottom ^F forward to next page ^G tell what is going on ^H backspace the cursor ^N next line, same column ^P previous line, same column ^U scrolls up in the file ^Y exposes another line at the top + next line, at the beginning \- previous line, at the beginning / scan for a following string forwards ? scan backwards B back a word, ignoring punctuation G go to specified line, last default H home screen line M middle screen line L last screen line W forward a word, ignoring punctuation b back a word e end of current word n scan for next instance of \fB/\fR or \fB?\fR pattern w word after this word .TE .NH 2 View .PP If you want to use the editor to look at a file, rather than to make changes, invoke it as .I view instead of .I vi . This will set the .I readonly option which will prevent you from accidently overwriting the file. .sp .NH 1 Making simple changes .NH 2 Inserting .PP One of the most useful commands is the \fBi\fR (insert) command. After you type \fBi\fR, everything you type until you hit \s-2ESC\s0 is inserted into the file. Try this now; position yourself to some word in the file and try inserting text before this word. If you are on an dumb terminal it will seem, for a minute, that some of the characters in your line have been overwritten, but they will reappear when you hit \s-2ESC\s0. .PP Now try finding a word which can, but does not, end in an `s'. Position yourself at this word and type \fBe\fR (move to end of word), then \fBa\fR for append and then `s\s-2ESC\s0' to terminate the textual insert. This sequence of commands can be used to easily pluralize a word. .PP Try inserting and appending a few times to make sure you understand how this works; \fBi\fR placing text to the left of the cursor, \fBa\fR to the right. .PP It is often the case that you want to add new lines to the file you are editing, before or after some specific line in the file. Find a line where this makes sense and then give the command \fBo\fR to create a new line after the line you are on, or the command \fBO\fR to create a new line before the line you are on. After you create a new line in this way, text you type up to an \s-2ESC\s0 is inserted on the new line. .PP Many related editor commands are invoked by the same letter key and differ only in that one is given by a lower case key and the other is given by an upper case key. In these cases, the upper case key often differs from the lower case key in its sense of direction, with the upper case key working backward and/or up, while the lower case key moves forward and/or down. .PP Whenever you are typing in text, you can give many lines of input or just a few characters. To type in more than one line of text, hit a \s-2RETURN\s0 at the middle of your input. A new line will be created for text, and you can continue to type. If you are on a slow and dumb terminal the editor may choose to wait to redraw the tail of the screen, and will let you type over the existing screen lines. This avoids the lengthy delay which would occur if the editor attempted to keep the tail of the screen always up to date. The tail of the screen will be fixed up, and the missing lines will reappear, when you hit \s-2ESC\s0. .PP While you are inserting new text, you can use the characters you normally use at the system command level (usually \fB^H\fR or \fB#\fR) to backspace over the last character which you typed, and the character which you use to kill input lines (usually \fB@\fR, \fB^X\fR, or \fB^U\fR) to erase the input you have typed on the current line.\*(dg .FS \*(dg In fact, the character \fB^H\fR (backspace) always works to erase the last input character here, regardless of what your erase character is. .FE The character \fB^W\fR will erase a whole word and leave you after the space after the previous word; it is useful for quickly backing up in an insert. .PP Notice that when you backspace during an insertion the characters you backspace over are not erased; the cursor moves backwards, and the characters remain on the display. This is often useful if you are planning to type in something similar. In any case the characters disappear when when you hit \s-2ESC\s0; if you want to get rid of them immediately, hit an \s-2ESC\s0 and then \fBa\fR again. .PP Notice also that you can't erase characters which you didn't insert, and that you can't backspace around the end of a line. If you need to back up to the previous line to make a correction, just hit \s-2ESC\s0 and move the cursor back to the previous line. After making the correction you can return to where you were and use the insert or append command again. .sp .5 .NH 2 Making small corrections .PP You can make small corrections in existing text quite easily. Find a single character which is wrong or just pick any character. Use the arrow keys to find the character, or get near the character with the word motion keys and then either backspace (hit the \s-2BS\s0 key or \fB^H\fR or even just \fBh\fR) or \s-2SPACE\s0 (using the space bar) until the cursor is on the character which is wrong. If the character is not needed then hit the \fBx\fP key; this deletes the character from the file. It is analogous to the way you \fBx\fP out characters when you make mistakes on a typewriter (except it's not as messy). .PP If the character is incorrect, you can replace it with the correct character by giving the command \fBr\fR\fIc\fR, where \fIc\fR is replaced by the correct character. Finally if the character which is incorrect should be replaced by more than one character, give the command \fBs\fR which substitutes a string of characters, ending with \s-2ESC\s0, for it. If there are a small number of characters which are wrong you can precede \fBs\fR with a count of the number of characters to be replaced. Counts are also useful with \fBx\fR to specify the number of characters to be deleted. .NH 2 More corrections: operators .PP You already know almost enough to make changes at a higher level. All you need to know now is that the .B d key acts as a delete operator. Try the command .B dw to delete a word. Try hitting \fB.\fR a few times. Notice that this repeats the effect of the \fBdw\fR. The command \fB.\fR repeats the last command which made a change. You can remember it by analogy with an ellipsis `\fB...\fR'. .PP Now try \fBdb\fR. This deletes a word backwards, namely the preceding word. Try \fBd\fR\s-2SPACE\s0. This deletes a single character, and is equivalent to the \fBx\fR command. .PP Another very useful operator is .B c or change. The command .B cw thus changes the text of a single word. You follow it by the replacement text ending with an \s-2ESC\s0. Find a word which you can change to another, and try this now. Notice that the end of the text to be changed was marked with the character `$' so that you can see this as you are typing in the new material. .sp .5 .NH 2 Operating on lines .PP It is often the case that you want to operate on lines. Find a line which you want to delete, and type \fBdd\fR, the .B d operator twice. This will delete the line. If you are on a dumb terminal, the editor may just erase the line on the screen, replacing it with a line with only an @ on it. This line does not correspond to any line in your file, but only acts as a place holder. It helps to avoid a lengthy redraw of the rest of the screen which would be necessary to close up the hole created by the deletion on a terminal without a delete line capability. .PP Try repeating the .B c operator twice; this will change a whole line, erasing its previous contents and replacing them with text you type up to an \s-2ESC\s0.\*(dg .FS \*(dg The command \fBS\fR is a convenient synonym for for \fBcc\fR, by analogy with \fBs\fR. Think of \fBS\fR as a substitute on lines, while \fBs\fR is a substitute on characters. .FE .PP You can delete or change more than one line by preceding the .B dd or .B cc with a count, i.e. \fB5dd\fR deletes 5 lines. You can also give a command like \fBdL\fR to delete all the lines up to and including the last line on the screen, or \fBd3L\fR to delete through the third from the bottom line. Try some commands like this now.* .FS * One subtle point here involves using the \fB/\fR search after a \fBd\fR. This will normally delete characters from the current position to the point of the match. If what is desired is to delete whole lines including the two points, give the pattern as \fB/pat/+0\fR, a line address. .FE Notice that the editor lets you know when you change a large number of lines so that you can see the extent of the change. The editor will also always tell you when a change you make affects text which you cannot see. .NH 2 Undoing .PP Now suppose that the last change which you made was incorrect; you could use the insert, delete and append commands to put the correct material back. However, since it is often the case that we regret a change or make a change incorrectly, the editor provides a .B u (undo) command to reverse the last change which you made. Try this a few times, and give it twice in a row to notice that an .B u also undoes a .B u. .PP The undo command lets you reverse only a single change. After you make a number of changes to a line, you may decide that you would rather have the original state of the line back. The .B U command restores the current line to the state before you started changing it. .PP You can recover text which you delete, even if undo will not bring it back; see the section on recovering lost text below. .NH 2 Summary .IP .TS lw(.50i)b a. \fR\s-2SPACE\s0\fP advance the cursor one position ^H backspace the cursor ^W erase a word during an insert \fRerase\fP your erase (usually ^H or #), erases a character during an insert \fRkill\fP your kill (usually @, ^X, or ^U), kills the insert on this line \&\fB.\fP repeats the changing command O opens and inputs new lines, above the current U undoes the changes you made to the current line a appends text after the cursor c changes the object you specify to the following text d deletes the object you specify i inserts text before the cursor o opens and inputs new lines, below the current u undoes the last change .TE .NH 1 Moving about; rearranging and duplicating text .NH 2 Low level character motions .PP Now move the cursor to a line where there is a punctuation or a bracketing character such as a parenthesis or a comma or period. Try the command \fBf\fR\fIx\fR where \fIx\fR is this character. This command finds the next \fIx\fR character to the right of the cursor in the current line. Try then hitting a \fB;\fR, which finds the next instance of the same character. By using the \fBf\fR command and then a sequence of \fB;\fR's you can often get to a particular place in a line much faster than with a sequence of word motions or \s-2SPACE\s0s. There is also a \fBF\fR command, which is like \fBf\fR, but searches backward. The \fB;\fR command repeats \fBF\fR also. .PP When you are operating on the text in a line it is often desirable to deal with the characters up to, but not including, the first instance of a character. Try \fBdf\fR\fIx\fR for some \fIx\fR now and notice that the \fIx\fR character is deleted. Undo this with \fBu\fR and then try \fBdt\fR\fIx\fR; the \fBt\fR here stands for to, i.e. delete up to the next \fIx\fR, but not the \fIx\fR. The command \fBT\fR is the reverse of \fBt\fR. .PP When working with the text of a single line, an \fB\(ua\fR moves the cursor to the first non-white position on the line, and a \fB$\fR moves it to the end of the line. Thus \fB$a\fR will append new text at the end of the current line. .PP Your file may have tab (\fB^I\fR) characters in it. These characters are represented as a number of spaces expanding to a tab stop, where tab stops are every 8 positions.* .FS * This is settable by a command of the form \fB:se ts=\fR\fIx\fR\s-2CR\s0, where \fIx\fR is 4 to set tabstops every four columns. This has effect on the screen representation within the editor. .FE When the cursor is at a tab, it sits on the last of the several spaces which represent that tab. Try moving the cursor back and forth over tabs so you understand how this works. .PP On rare occasions, your file may have nonprinting characters in it. These characters are displayed in the same way they are represented in this document, that is with a two character code, the first character of which is `^'. On the screen non-printing characters resemble a `^' character adjacent to another, but spacing or backspacing over the character will reveal that the two characters are, like the spaces representing a tab character, a single character. .PP The editor sometimes discards control characters, depending on the character and the setting of the .I beautify option, if you attempt to insert them in your file. You can get a control character in the file by beginning an insert and then typing a \fB^V\fR before the control character. The \fB^V\fR quotes the following character, causing it to be inserted directly into the file. .PP .NH 2 Higher level text objects .PP In working with a document it is often advantageous to work in terms of sentences, paragraphs, and sections. The operations \fB(\fR and \fB)\fR move to the beginning of the previous and next sentences respectively. Thus the command \fBd)\fR will delete the rest of the current sentence; likewise \fBd(\fR will delete the previous sentence if you are at the beginning of the current sentence, or the current sentence up to where you are if you are not at the beginning of the current sentence. .PP A sentence is defined to end at a `.', `!' or `?' which is followed by either the end of a line, or by two spaces. Any number of closing `)', `]', `"' and `\(aa' characters may appear after the `.', `!' or `?' before the spaces or end of line. .PP The operations \fB{\fR and \fB}\fR move over paragraphs and the operations \fB[[\fR and \fB]]\fR move over sections.\*(dg .FS \*(dg The \fB[[\fR and \fB]]\fR operations require the operation character to be doubled because they can move the cursor far from where it currently is. While it is easy to get back with the command \fB\(ga\(ga\fP, these commands would still be frustrating if they were easy to hit accidentally. .FE .PP A paragraph begins after each empty line, and also at each of a set of paragraph macros, specified by the pairs of characters in the definition of the string valued option \fIparagraphs\fR. The default setting for this option defines the paragraph macros of the \fI\-ms\fR and \fI\-mm\fR macro packages, i.e. the `.IP', `.LP', `.PP' and `.QP', `.P' and `.LI' macros.\*(dd .FS \*(dd You can easily change or extend this set of macros by assigning a different string to the \fIparagraphs\fR option in your EXINIT. See section 6.2 for details. The `.bp' directive is also considered to start a paragraph. .FE Each paragraph boundary is also a sentence boundary. The sentence and paragraph commands can be given counts to operate over groups of sentences and paragraphs. .PP Sections in the editor begin after each macro in the \fIsections\fR option, normally `.NH', `.SH', `.H' and `.HU', and each line with a formfeed \fB^L\fR in the first column. Section boundaries are always line and paragraph boundaries also. .PP Try experimenting with the sentence and paragraph commands until you are sure how they work. If you have a large document, try looking through it using the section commands. The section commands interpret a preceding count as a different window size in which to redraw the screen at the new location, and this window size is the base size for newly drawn windows until another size is specified. This is very useful if you are on a slow terminal and are looking for a particular section. You can give the first section command a small count to then see each successive section heading in a small window. .NH 2 Rearranging and duplicating text .PP The editor has a single unnamed buffer where the last deleted or changed away text is saved, and a set of named buffers \fBa\fR\-\fBz\fR which you can use to save copies of text and to move text around in your file and between files. .PP The operator .B y yanks a copy of the object which follows into the unnamed buffer. If preceded by a buffer name, \fB"\fR\fIx\fR\|\fBy\fR, where \fIx\fR here is replaced by a letter \fBa\-z\fR, it places the text in the named buffer. The text can then be put back in the file with the commands .B p and .B P; \fBp\fR puts the text after or below the cursor, while \fBP\fR puts the text before or above the cursor. .PP If the text which you yank forms a part of a line, or is an object such as a sentence which partially spans more than one line, then when you put the text back, it will be placed after the cursor (or before if you use \fBP\fR). If the yanked text forms whole lines, they will be put back as whole lines, without changing the current line. In this case, the put acts much like a \fBo\fR or \fBO\fR command. .PP Try the command \fBYP\fR. This makes a copy of the current line and leaves you on this copy, which is placed before the current line. The command \fBY\fR is a convenient abbreviation for \fByy\fR. The command \fBYp\fR will also make a copy of the current line, and place it after the current line. You can give \fBY\fR a count of lines to yank, and thus duplicate several lines; try \fB3YP\fR. .PP To move text within the buffer, you need to delete it in one place, and put it back in another. You can precede a delete operation by the name of a buffer in which the text is to be stored as in \fB"a5dd\fR deleting 5 lines into the named buffer \fIa\fR. You can then move the cursor to the eventual resting place of the these lines and do a \fB"ap\fR or \fB"aP\fR to put them back. In fact, you can switch and edit another file before you put the lines back, by giving a command of the form \fB:e \fR\fIname\fR\s-2CR\s0 where \fIname\fR is the name of the other file you want to edit. You will have to write back the contents of the current editor buffer (or discard them) if you have made changes before the editor will let you switch to the other file. An ordinary delete command saves the text in the unnamed buffer, so that an ordinary put can move it elsewhere. However, the unnamed buffer is lost when you change files, so to move text from one file to another you should use an unnamed buffer. .NH 2 Summary. .IP .TS lw(.50i)b a. \(ua first non-white on line $ end of line ) forward sentence } forward paragraph ]] forward section ( backward sentence { backward paragraph [[ backward section f\fIx\fR find \fIx\fR forward in line p put text back, after cursor or below current line y yank operator, for copies and moves t\fIx\fR up to \fIx\fR forward, for operators F\fIx\fR f backward in line P put text back, before cursor or above current line T\fIx\fR t backward in line .TE .ne 1i .NH 1 High level commands .NH 2 Writing, quitting, editing new files .PP So far we have seen how to enter .I vi and to write out our file using either \fBZZ\fR or \fB:w\fR\s-2CR\s0. The first exits from the editor, (writing if changes were made), the second writes and stays in the editor. .PP If you have changed the editor's copy of the file but do not wish to save your changes, either because you messed up the file or decided that the changes are not an improvement to the file, then you can give the command \fB:q!\fR\s-2CR\s0 to quit from the editor without writing the changes. You can also reedit the same file (starting over) by giving the command \fB:e!\fR\s-2CR\s0. These commands should be used only rarely, and with caution, as it is not possible to recover the changes you have made after you discard them in this manner. .PP You can edit a different file without leaving the editor by giving the command \fB:e\fR\ \fIname\fR\s-2CR\s0. If you have not written out your file before you try to do this, then the editor will tell you this, and delay editing the other file. You can then give the command \fB:w\fR\s-2CR\s0 to save your work and then the \fB:e\fR\ \fIname\fR\s-2CR\s0 command again, or carefully give the command \fB:e!\fR\ \fIname\fR\s-2CR\s0, which edits the other file discarding the changes you have made to the current file. To have the editor automatically save changes, include .I "set autowrite" in your EXINIT, and use \fB:n\fP instead of \fB:e\fP. .NH 2 Escaping to a shell .PP You can get to a shell to execute a single command by giving a .I vi command of the form \fB:!\fIcmd\fR\s-2CR\s0. The system will run the single command .I cmd and when the command finishes, the editor will ask you to hit a \s-2RETURN\s0 to continue. When you have finished looking at the output on the screen, you should hit \s-2RETURN\s0 and the editor will clear the screen and redraw it. You can then continue editing. You can also give another \fB:\fR command when it asks you for a \s-2RETURN\s0; in this case the screen will not be redrawn. .PP If you wish to execute more than one command in the shell, then you can give the command \fB:sh\fR\s-2CR\s0. This will give you a new shell, and when you finish with the shell, ending it by typing a \fB^D\fR, the editor will clear the screen and continue. .PP On systems which support it, \fB^Z\fP will suspend the editor and return to the (top level) shell. When the editor is resumed, the screen will be redrawn. .NH 2 Marking and returning .PP The command \fB\(ga\(ga\fR returned to the previous place after a motion of the cursor by a command such as \fB/\fR, \fB?\fR or \fBG\fR. You can also mark lines in the file with single letter tags and return to these marks later by naming the tags. Try marking the current line with the command \fBm\fR\fIx\fR, where you should pick some letter for \fIx\fR, say `a'. Then move the cursor to a different line (any way you like) and hit \fB\(gaa\fR. The cursor will return to the place which you marked. Marks last only until you edit another file. .PP When using operators such as .B d and referring to marked lines, it is often desirable to delete whole lines rather than deleting to the exact position in the line marked by \fBm\fR. In this case you can use the form \fB\(aa\fR\fIx\fR rather than \fB\(ga\fR\fIx\fR. Used without an operator, \fB\(aa\fR\fIx\fR will move to the first non-white character of the marked line; similarly \fB\(aa\(aa\fR moves to the first non-white character of the line containing the previous context mark \fB\(ga\(ga\fR. .NH 2 Adjusting the screen .PP If the screen image is messed up because of a transmission error to your terminal, or because some program other than the editor wrote output to your terminal, you can hit a \fB^L\fR, the \s-2ASCII\s0 form-feed character, to cause the screen to be refreshed. .PP On a dumb terminal, if there are @ lines in the middle of the screen as a result of line deletion, you may get rid of these lines by typing \fB^R\fR to cause the editor to retype the screen, closing up these holes. .PP Finally, if you wish to place a certain line on the screen at the top middle or bottom of the screen, you can position the cursor to that line, and then give a \fBz\fR command. You should follow the \fBz\fR command with a \s-2RETURN\s0 if you want the line to appear at the top of the window, a \fB.\fR if you want it at the center, or a \fB\-\fR if you want it at the bottom. .NH 1 Special topics .NH 2 Editing on slow terminals .PP When you are on a slow terminal, it is important to limit the amount of output which is generated to your screen so that you will not suffer long delays, waiting for the screen to be refreshed. We have already pointed out how the editor optimizes the updating of the screen during insertions on dumb terminals to limit the delays, and how the editor erases lines to @ when they are deleted on dumb terminals. .PP The use of the slow terminal insertion mode is controlled by the .I slowopen option. You can force the editor to use this mode even on faster terminals by giving the command \fB:se slow\fR\s-2CR\s0. If your system is sluggish this helps lessen the amount of output coming to your terminal. You can disable this option by \fB:se noslow\fR\s-2CR\s0. .PP The editor can simulate an intelligent terminal on a dumb one. Try giving the command \fB:se redraw\fR\s-2CR\s0. This simulation generates a great deal of output and is generally tolerable only on lightly loaded systems and fast terminals. You can disable this by giving the command \fB:se noredraw\fR\s-2CR\s0. .PP The editor also makes editing more pleasant at low speed by starting editing in a small window, and letting the window expand as you edit. This works particularly well on intelligent terminals. The editor can expand the window easily when you insert in the middle of the screen on these terminals. If possible, try the editor on an intelligent terminal to see how this works. .PP You can control the size of the window which is redrawn each time the screen is cleared by giving window sizes as argument to the commands which cause large screen motions: .DS .B ": / ? [[ ]] \(ga \(aa" .DE Thus if you are searching for a particular instance of a common string in a file you can precede the first search command by a small number, say 3, and the editor will draw three line windows around each instance of the string which it locates. .PP You can easily expand or contract the window, placing the current line as you choose, by giving a number on a \fBz\fR command, after the \fBz\fR and before the following \s-2RETURN\s0, \fB.\fR or \fB\-\fR. Thus the command \fBz5.\fR redraws the screen with the current line in the center of a five line window.\*(dg .FS \*(dg Note that the command \fB5z.\fR has an entirely different effect, placing line 5 in the center of a new window. .FE .PP If the editor is redrawing or otherwise updating large portions of the display, you can interrupt this updating by hitting a \s-2DEL\s0 or \s-2RUB\s0 as usual. If you do this you may partially confuse the editor about what is displayed on the screen. You can still edit the text on the screen if you wish; clear up the confusion by hitting a \fB^L\fR; or move or search again, ignoring the current state of the display. .PP See section 7.8 on \fIopen\fR mode for another way to use the .I vi command set on slow terminals. .NH 2 Options, set, and editor startup files .PP The editor has a set of options, some of which have been mentioned above. The most useful options are given in the following table. .PP The options are of three kinds: numeric options, string options, and toggle options. You can set numeric and string options by a statement of the form .DS \fBset\fR \fIopt\fR\fB=\fR\fIval\fR .DE and toggle options can be set or unset by statements of one of the forms .DS \fBset\fR \fIopt\fR \fBset\fR \fBno\fR\fIopt\fR .DE .KF .TS lb lb lb lb l l l a. Name Default Description _ autoindent noai Supply indentation automatically autowrite noaw Automatic write before \fB:n\fR, \fB:ta\fR, \fB^\(ua\fR, \fB!\fR ignorecase noic Ignore case in searching lisp nolisp \fB( { ) }\fR commands deal with S-expressions list nolist Tabs print as ^I; end of lines marked with $ magic nomagic The characters . [ and * are special in scans number nonu Lines are displayed prefixed with line numbers paragraphs para=IPLPPPQPbpP LI Macro names which start paragraphs redraw nore Simulate a smart terminal on a dumb one sections sect=NHSHH HU Macro names which start new sections shiftwidth sw=8 Shift distance for <, > and input \fB^D\fP and \fB^T\fR showmatch nosm Show matching \fB(\fP or \fB{\fP as \fB)\fP or \fB}\fR is typed slowopen slow Postpone display updates during inserts term dumb The kind of terminal you are using. .TE .KE These statements can be placed in your EXINIT in your environment, or given while you are running .I vi by preceding them with a \fB:\fR and following them with a \s-2CR\s0. .PP You can get a list of all options which you have changed by the command \fB:set\fR\s-2CR\s0, or the value of a single option by the command \fB:set\fR \fIopt\fR\fB?\fR\s-2CR\s0. A list of all possible options and their values is generated by \fB:set all\fP\s-2CR\s0. Set can be abbreviated \fBse\fP. Multiple options can be placed on one line, e.g. \fB:se ai aw nu\fP\s-2CR\s0. .PP Options set by the \fBset\fP command only last while you stay in the editor. It is common to want to have certain options set whenever you use the editor. This can be accomplished by creating a list of \fIex\fP commands\*(dg .FS \*(dg All commands which start with .B : are \fIex\fP commands. .FE which are to be run every time you start up \fIex\fP, \fIedit\fP, or \fIvi\fP. A typical list includes a \fBset\fP command, and possibly a few \fBmap\fP commands. Since it is advisable to get these commands on one line, they can be separated with the | character, for example: .DS \fBset\fP ai aw terse|\fBmap\fP @ dd|\fBmap\fP # x .DE which sets the options \fIautoindent\fP, \fIautowrite\fP, \fIterse\fP, (the .B set command), makes @ delete a line, (the first .B map ), and makes # delete a character, (the second .B map ). (See section 6.9 for a description of the \fBmap\fP command) This string should be placed in the variable EXINIT in your environment. If you use the shell \fIcsh\fP, put this line in the file .I .login in your home directory: .DS setenv EXINIT \(aa\fBset\fP ai aw terse|\fBmap\fP @ dd|\fBmap\fP # x\(aa .DE If you use the standard shell \fIsh\fP, put these lines in the file .I .profile in your home directory: .DS EXINIT=\(aa\fBset\fP ai aw terse|\fBmap\fP @ dd|\fBmap\fP # x\(aa export EXINIT .DE Of course, the particulars of the line would depend on which options you wanted to set. .NH 2 Recovering lost lines .PP You might have a serious problem if you delete a number of lines and then regret that they were deleted. Despair not, the editor saves the last 9 deleted blocks of text in a set of numbered registers 1\-9. You can get the \fIn\fR'th previous deleted text back in your file by the command "\fR\fIn\fR\|\fBp\fR. The "\fR here says that a buffer name is to follow, \fIn\fR is the number of the buffer you wish to try (use the number 1 for now), and .B p is the put command, which puts text in the buffer after the cursor. If this doesn't bring back the text you wanted, hit .B u to undo this and then \fB\&.\fR (period) to repeat the put command. In general the \fB\&.\fR command will repeat the last change you made. As a special case, when the last command refers to a numbered text buffer, the \fB.\fR command increments the number of the buffer before repeating the command. Thus a sequence of the form .DS \fB"1pu.u.u.\fR .DE will, if repeated long enough, show you all the deleted text which has been saved for you. You can omit the .B u commands here to gather up all this text in the buffer, or stop after any \fB\&.\fR command to keep just the then recovered text. The command .B P can also be used rather than .B p to put the recovered text before rather than after the cursor. .NH 2 Recovering lost files .PP If the system crashes, you can recover the work you were doing to within a few changes. You will normally receive mail when you next login giving you the name of the file which has been saved for you. You should then change to the directory where you were when the system crashed and give a command of the form: .DS % \fBvi \-r\fR \fIname\fR .DE replacing \fIname\fR with the name of the file which you were editing. This will recover your work to a point near where you left off.\*(dg .FS \*(dg In rare cases, some of the lines of the file may be lost. The editor will give you the numbers of these lines and the text of the lines will be replaced by the string `LOST'. These lines will almost always be among the last few which you changed. You can either choose to discard the changes which you made (if they are easy to remake) or to replace the few lost lines by hand. .FE .PP You can get a listing of the files which are saved for you by giving the command: .DS % \fBvi \-r\fR .DE If there is more than one instance of a particular file saved, the editor gives you the newest instance each time you recover it. You can thus get an older saved copy back by first recovering the newer copies. .PP For this feature to work, .I vi must be correctly installed by a super user on your system, and the .I mail program must exist to receive mail. The invocation ``\fIvi -r\fP'' will not always list all saved files, but they can be recovered even if they are not listed. .NH 2 Continuous text input .PP When you are typing in large amounts of text it is convenient to have lines broken near the right margin automatically. You can cause this to happen by giving the command \fB:se wm=10\fR\s-2CR\s0. This causes all lines to be broken at a space at least 10 columns from the right hand edge of the screen. .PP If the editor breaks an input line and you wish to put it back together you can tell it to join the lines with \fBJ\fR. You can give \fBJ\fR a count of the number of lines to be joined as in \fB3J\fR to join 3 lines. The editor supplies white space, if appropriate, at the juncture of the joined lines, and leaves the cursor at this white space. You can kill the white space with \fBx\fR if you don't want it. .NH 2 Features for editing programs .PP The editor has a number of commands for editing programs. The thing that most distinguishes editing of programs from editing of text is the desirability of maintaining an indented structure to the body of the program. The editor has a .I autoindent facility for helping you generate correctly indented programs. .PP To enable this facility you can give the command \fB:se ai\fR\s-2CR\s0. Now try opening a new line with \fBo\fR and type some characters on the line after a few tabs. If you now start another line, notice that the editor supplies white space at the beginning of the line to line it up with the previous line. You cannot backspace over this indentation, but you can use \fB^D\fR key to backtab over the supplied indentation. .PP Each time you type \fB^D\fR you back up one position, normally to an 8 column boundary. This amount is settable; the editor has an option called .I shiftwidth which you can set to change this value. Try giving the command \fB:se sw=4\fR\s-2CR\s0 and then experimenting with autoindent again. .PP For shifting lines in the program left and right, there are operators .B < and .B >. These shift the lines you specify right or left by one .I shiftwidth. Try .B << and .B >> which shift one line left or right, and .B L shifting the rest of the display left and right. .PP If you have a complicated expression and wish to see how the parentheses match, put the cursor at a left or right parenthesis and hit \fB%\fR. This will show you the matching parenthesis. This works also for braces { and }, and brackets [ and ]. .PP If you are editing C programs, you can use the \fB[[\fR and \fB]]\fR keys to advance or retreat to a line starting with a \fB{\fR, i.e. a function declaration at a time. When \fB]]\fR is used with an operator it stops after a line which starts with \fB}\fR; this is sometimes useful with \fBy]]\fR. .NH 2 Filtering portions of the buffer .PP You can run system commands over portions of the buffer using the operator \fB!\fR. You can use this to sort lines in the buffer, or to reformat portions of the buffer with a pretty-printer. Try typing in a list of random words, one per line and ending them with a blank line. Back up to the beginning of the list, and then give the command \fB!}sort\fR\s-2CR\s0. This says to sort the next paragraph of material, and the blank line ends a paragraph. .NH 2 Commands for editing \s-2LISP\s0 .PP If you are editing a \s-2LISP\s0 program you should set the option .I lisp by doing \fB:se\ lisp\fR\s-2CR\s0. This changes the \fB(\fR and \fB)\fR commands to move backward and forward over s-expressions. The \fB{\fR and \fB}\fR commands are like \fB(\fR and \fB)\fR but don't stop at atoms. These can be used to skip to the next list, or through a comment quickly. .PP The .I autoindent option works differently for \s-2LISP\s0, supplying indent to align at the first argument to the last open list. If there is no such argument then the indent is two spaces more than the last level. .PP There is another option which is useful for typing in \s-2LISP\s0, the .I showmatch option. Try setting it with \fB:se sm\fR\s-2CR\s0 and then try typing a `(' some words and then a `)'. Notice that the cursor shows the position of the `(' which matches the `)' briefly. This happens only if the matching `(' is on the screen, and the cursor stays there for at most one second. .PP The editor also has an operator to realign existing lines as though they had been typed in with .I lisp and .I autoindent set. This is the \fB=\fR operator. Try the command \fB=%\fR at the beginning of a function. This will realign all the lines of the function declaration. .PP When you are editing \s-2LISP\s0,, the \fB[[\fR and \fR]]\fR advance and retreat to lines beginning with a \fB(\fR, and are useful for dealing with entire function definitions. .NH 2 Macros .PP .I Vi has a parameterless macro facility, which lets you set it up so that when you hit a single keystroke, the editor will act as though you had hit some longer sequence of keys. You can set this up if you find yourself typing the same sequence of commands repeatedly. .PP Briefly, there are two flavors of macros: .IP a) Ones where you put the macro body in a buffer register, say \fIx\fR. You can then type \fB@x\fR to invoke the macro. The \fB@\fR may be followed by another \fB@\fR to repeat the last macro. .IP b) You can use the .I map command from .I vi (typically in your .I EXINIT ) with a command of the form: .DS :map \fIlhs\fR \fIrhs\fR\s-2CR .DE mapping .I lhs into .I rhs. There are restrictions: .I lhs should be one keystroke (either 1 character or one function key) since it must be entered within one second (unless .I notimeout is set, in which case you can type it as slowly as you wish, and .I vi will wait for you to finish it before it echoes anything). The .I lhs can be no longer than 10 characters, the .I rhs no longer than 100. To get a space, tab or newline into .I lhs or .I rhs you should escape them with a \fB^V\fR. (It may be necessary to double the \fB^V\fR if the map command is given inside .I vi, rather than in .I ex.) Spaces and tabs inside the .I rhs need not be escaped. .PP Thus to make the \fBq\fR key write and exit the editor, you can give the command .DS :map q :wq\fB^V^V\fP\s-2CR CR\s0 .DE which means that whenever you type \fBq\fR, it will be as though you had typed the four characters \fB:wq\fR\s-2CR\s0. A \fB^V\fR's is needed because without it the \s-2CR\s0 would end the \fB:\fR command, rather than becoming part of the .I map definition. There are two .B ^V 's because from within .I vi , two .B ^V 's must be typed to get one. The first \s-2CR\s0 is part of the .I rhs , the second terminates the : command. .PP Macros can be deleted with .DS unmap lhs .DE .PP If the .I lhs of a macro is ``#0'' through ``#9'', this maps the particular function key instead of the 2 character ``#'' sequence. So that terminals without function keys can access such definitions, the form ``#x'' will mean function key .I x on all terminals (and need not be typed within one second.) The character ``#'' can be changed by using a macro in the usual way: .DS :map \fB^V^V^I\fP # .DE to use tab, for example. (This won't affect the .I map command, which still uses .B #, but just the invocation from visual mode. .PP The undo command reverses an entire macro call as a unit, if it made any changes. .PP Placing a `!' after the word .B map causes the mapping to apply to input mode, rather than command mode. Thus, to arrange for \fB^T\fP to be the same as 4 spaces in input mode, you can type: .DS :map \fB^T\fP \fB^V\fP\o'b/'\o'b/'\o'b/'\o'b/' .DE where .B \o'b/' is a blank. The \fB^V\fP is necessary to prevent the blanks from being taken as white space between the .I lhs and .I rhs . .NH Word Abbreviations .PP A feature similar to macros in input mode is word abbreviation. This allows you to type a short word and have it expanded into a longer word or words. The commands are .B :abbreviate and .B :unabbreviate (\fB:ab\fP and .B :una ) and have the same syntax as .B :map . For example: .DS :ab eecs Electrical Engineering and Computer Sciences .DE causes the word `eecs' to always be changed into the phrase `Electrical Engineering and Computer Sciences'. Word abbreviation is different from macros in that only whole words are affected. If `eecs' were typed as part of a larger word, it would be left alone. Also, the partial word is echoed as it is typed. There is no need for an abbreviation to be a single keystroke, as it should be with a macro. .NH 2 Abbreviations .PP The editor has a number of short commands which abbreviate longer commands which we have introduced here. You can find these commands easily on the quick reference card. They often save a bit of typing and you can learn them as convenient. .NH 1 Nitty-gritty details .NH 2 Line representation in the display .PP The editor folds long logical lines onto many physical lines in the display. Commands which advance lines advance logical lines and will skip over all the segments of a line in one motion. The command \fB|\fR moves the cursor to a specific column, and may be useful for getting near the middle of a long line to split it in half. Try \fB80|\fR on a line which is more than 80 columns long.\*(dg .FS \*(dg You can make long lines very easily by using \fBJ\fR to join together short lines. .FE .PP The editor only puts full lines on the display; if there is not enough room on the display to fit a logical line, the editor leaves the physical line empty, placing only an @ on the line as a place holder. When you delete lines on a dumb terminal, the editor will often just clear the lines to @ to save time (rather than rewriting the rest of the screen.) You can always maximize the information on the screen by giving the \fB^R\fR command. .PP If you wish, you can have the editor place line numbers before each line on the display. Give the command \fB:se nu\fR\s-2CR\s0 to enable this, and the command \fB:se nonu\fR\s-2CR\s0 to turn it off. You can have tabs represented as \fB^I\fR and the ends of lines indicated with `$' by giving the command \fB:se list\fR\s-2CR\s0; \fB:se nolist\fR\s-2CR\s0 turns this off. .PP Finally, lines consisting of only the character `~' are displayed when the last line in the file is in the middle of the screen. These represent physical lines which are past the logical end of file. .NH 2 Counts .PP Most .I vi commands will use a preceding count to affect their behavior in some way. The following table gives the common ways in which the counts are used: .DS .TS l lb. new window size : / ? [[ ]] \` \' scroll amount ^D ^U line/column number z G | repeat effect \fRmost of the rest\fP .TE .DE .PP The editor maintains a notion of the current default window size. On terminals which run at speeds greater than 1200 baud the editor uses the full terminal screen. On terminals which are slower than 1200 baud (most dialup lines are in this group) the editor uses 8 lines as the default window size. At 1200 baud the default is 16 lines. .PP This size is the size used when the editor clears and refills the screen after a search or other motion moves far from the edge of the current window. The commands which take a new window size as count all often cause the screen to be redrawn. If you anticipate this, but do not need as large a window as you are currently using, you may wish to change the screen size by specifying the new size before these commands. In any case, the number of lines used on the screen will expand if you move off the top with a \fB\-\fR or similar command or off the bottom with a command such as \s-2RETURN\s0 or \fB^D\fR. The window will revert to the last specified size the next time it is cleared and refilled.\*(dg .FS \*(dg But not by a \fB^L\fR which just redraws the screen as it is. .FE .PP The scroll commands \fB^D\fR and \fB^U\fR likewise remember the amount of scroll last specified, using half the basic window size initially. The simple insert commands use a count to specify a repetition of the inserted text. Thus \fB10a+\-\-\-\-\fR\s-2ESC\s0 will insert a grid-like string of text. A few commands also use a preceding count as a line or column number. .PP Except for a few commands which ignore any counts (such as \fB^R\fR), the rest of the editor commands use a count to indicate a simple repetition of their effect. Thus \fB5w\fR advances five words on the current line, while \fB5\fR\s-2RETURN\s0 advances five lines. A very useful instance of a count as a repetition is a count given to the \fB.\fR command, which repeats the last changing command. If you do \fBdw\fR and then \fB3.\fR, you will delete first one and then three words. You can then delete two more words with \fB2.\fR. .NH 2 More file manipulation commands .PP The following table lists the file manipulation commands which you can use when you are in .I vi. .KF .DS .TS lb l. :w write back changes :wq write and quit :x write (if necessary) and quit (same as ZZ). :e \fIname\fP edit file \fIname\fR :e! reedit, discarding changes :e + \fIname\fP edit, starting at end :e +\fIn\fP edit, starting at line \fIn\fP :e # edit alternate file :w \fIname\fP write file \fIname\fP :w! \fIname\fP overwrite file \fIname\fP :\fIx,y\fPw \fIname\fP write lines \fIx\fP through \fIy\fP to \fIname\fP :r \fIname\fP read file \fIname\fP into buffer :r !\fIcmd\fP read output of \fIcmd\fP into buffer :n edit next file in argument list :n! edit next file, discarding changes to current :n \fIargs\fP specify new argument list :ta \fItag\fP edit file containing tag \fItag\fP, at \fItag\fP .TE .DE .KE All of these commands are followed by a \s-2CR\s0 or \s-2ESC\s0. The most basic commands are \fB:w\fR and \fB:e\fR. A normal editing session on a single file will end with a \fBZZ\fR command. If you are editing for a long period of time you can give \fB:w\fR commands occasionally after major amounts of editing, and then finish with a \fBZZ\fR. When you edit more than one file, you can finish with one with a \fB:w\fR and start editing a new file by giving a \fB:e\fR command, or set .I autowrite and use \fB:n\fP . .PP If you make changes to the editor's copy of a file, but do not wish to write them back, then you must give an \fB!\fR after the command you would otherwise use; this forces the editor to discard any changes you have made. Use this carefully. .ne 1i .PP The \fB:e\fR command can be given a \fB+\fR argument to start at the end of the file, or a \fB+\fR\fIn\fR argument to start at line \fIn\fR\^. In actuality, \fIn\fR may be any editor command not containing a space, usefully a scan like \fB+/\fIpat\fR or \fB+?\fIpat\fR. In forming new names to the \fBe\fR command, you can use the character \fB%\fR which is replaced by the current file name, or the character \fB#\fR which is replaced by the alternate file name. The alternate file name is generally the last name you typed other than the current file. Thus if you try to do a \fB:e\fR and get a diagnostic that you haven't written the file, you can give a \fB:w\fR command and then a \fB:e #\fR command to redo the previous \fB:e\fR. .PP You can write part of the buffer to a file by finding out the lines that bound the range to be written using \fB^G\fR, and giving these numbers after the \fB:\fR and before the \fBw\fP, separated by \fB,\fR's. You can also mark these lines with \fBm\fR and then use an address of the form \fB\(aa\fR\fIx\fR\fB,\fB\(aa\fR\fIy\fR on the \fBw\fR command here. .PP You can read another file into the buffer after the current line by using the \fB:r\fR command. You can similarly read in the output from a command, just use \fB!\fR\fIcmd\fR instead of a file name. .PP If you wish to edit a set of files in succession, you can give all the names on the command line, and then edit each one in turn using the command \fB:n\fR. It is also possible to respecify the list of files to be edited by giving the \fB:n\fR command a list of file names, or a pattern to be expanded as you would have given it on the initial .I vi command. .PP If you are editing large programs, you will find the \fB:ta\fR command very useful. It utilizes a data base of function names and their locations, which can be created by programs such as .I ctags, to quickly find a function whose name you give. If the \fB:ta\fR command will require the editor to switch files, then you must \fB:w\fR or abandon any changes before switching. You can repeat the \fB:ta\fR command without any arguments to look for the same tag again. .NH 2 More about searching for strings .PP When you are searching for strings in the file with \fB/\fR and \fB?\fR, the editor normally places you at the next or previous occurrence of the string. If you are using an operator such as \fBd\fR, \fBc\fR or \fBy\fR, then you may well wish to affect lines up to the line before the line containing the pattern. You can give a search of the form \fB/\fR\fIpat\fR\fB/\-\fR\fIn\fR to refer to the \fIn\fR'th line before the next line containing \fIpat\fR, or you can use \fB+\fR instead of \fB\-\fR to refer to the lines after the one containing \fIpat\fR. If you don't give a line offset, then the editor will affect characters up to the match place, rather than whole lines; thus use ``+0'' to affect to the line which matches. .PP You can have the editor ignore the case of words in the searches it does by giving the command \fB:se ic\fR\s-2CR\s0. The command \fB:se noic\fR\s-2CR\s0 turns this off. .ne 1i .PP Strings given to searches may actually be regular expressions. If you do not want or need this facility, you should .DS set nomagic .DE in your EXINIT. In this case, only the characters \fB\(ua\fR and \fB$\fR are special in patterns. The character \fB\e\fR is also then special (as it is most everywhere in the system), and may be used to get at the an extended pattern matching facility. It is also necessary to use a \e before a \fB/\fR in a forward scan or a \fB?\fR in a backward scan, in any case. The following table gives the extended forms when \fBmagic\fR is set. .DS .TS lb l. \(ua at beginning of pattern, matches beginning of line $ at end of pattern, matches end of line \fB\&.\fR matches any character \e< matches the beginning of a word \e> matches the end of a word [\fIstr\fP] matches any single character in \fIstr\fP [\(ua\fIstr\fP] matches any single character not in \fIstr\fP [\fIx\fP\-\fIy\fP] matches any character between \fIx\fP and \fIy\fP * matches any number of the preceding pattern .TE .DE If you use \fBnomagic\fR mode, then the \fB. [\fR and \fB*\fR primitives are given with a preceding \e. .NH 2 More about input mode .PP There are a number of characters which you can use to make corrections during input mode. These are summarized in the following table. .sp .5 .DS .TS lb l. ^H deletes the last input character ^W deletes the last input word, defined as by \fBb\fR erase your erase character, same as \fB^H\fP kill your kill character, deletes the input on this line \e escapes a following \fB^H\fP and your erase and kill \s-2ESC\s0 ends an insertion \s-2DEL\s0 interrupts an insertion, terminating it abnormally \s-2CR\s0 starts a new line ^D backtabs over \fIautoindent\fP 0^D kills all the \fIautoindent\fP \(ua^D same as \fB0^D\fP, but restores indent next line ^V quotes the next non-printing character into the file .TE .DE .sp .5 .PP The most usual way of making corrections to input is by typing \fB^H\fR to correct a single character, or by typing one or more \fB^W\fR's to back over incorrect words. If you use \fB#\fR as your erase character in the normal system, it will work like \fB^H\fR. .PP Your system kill character, normally \fB@\fR, \fB^X\fP or \fB^U\fR, will erase all the input you have given on the current line. In general, you can neither erase input back around a line boundary nor can you erase characters which you did not insert with this insertion command. To make corrections on the previous line after a new line has been started you can hit \s-2ESC\s0 to end the insertion, move over and make the correction, and then return to where you were to continue. The command \fBA\fR which appends at the end of the current line is often useful for continuing. .PP If you wish to type in your erase or kill character (say # or @) then you must precede it with a \fB\e\fR, just as you would do at the normal system command level. A more general way of typing non-printing characters into the file is to precede them with a \fB^V\fR. The \fB^V\fR echoes as a \fB\(ua\fR character on which the cursor rests. This indicates that the editor expects you to type a control character. In fact you may type any character and it will be inserted into the file at that point.* .FS * This is not quite true. The implementation of the editor does not allow the \s-2NULL\s0 (\fB^@\fR) character to appear in files. Also the \s-2LF\s0 (linefeed or \fB^J\fR) character is used by the editor to separate lines in the file, so it cannot appear in the middle of a line. You can insert any other character, however, if you wait for the editor to echo the \fB\(ua\fR before you type the character. In fact, the editor will treat a following letter as a request for the corresponding control character. This is the only way to type \fB^S\fR or \fB^Q\fP, since the system normally uses them to suspend and resume output and never gives them to the editor to process. .FE .PP If you are using \fIautoindent\fR you can backtab over the indent which it supplies by typing a \fB^D\fR. This backs up to a \fIshiftwidth\fR boundary. This only works immediately after the supplied \fIautoindent\fR. .PP When you are using \fIautoindent\fR you may wish to place a label at the left margin of a line. The way to do this easily is to type \fB\(ua\fR and then \fB^D\fR. The editor will move the cursor to the left margin for one line, and restore the previous indent on the next. You can also type a \fB0\fR followed immediately by a \fB^D\fR if you wish to kill all the indent and not have it come back on the next line. .NH 2 Upper case only terminals .PP If your terminal has only upper case, you can still use .I vi by using the normal system convention for typing on such a terminal. Characters which you normally type are converted to lower case, and you can type upper case letters by preceding them with a \e. The characters { ~ } | \(ga are not available on such terminals, but you can escape them as \e( \e\(ua \e) \e! \e\(aa. These characters are represented on the display in the same way they are typed.\*(dd .FS \*(dd The \e character you give will not echo until you type another key. .FE .NH 2 Vi and ex .PP .I Vi is actually one mode of editing within the editor .I ex. When you are running .I vi you can escape to the line oriented editor of .I ex by giving the command \fBQ\fR. All of the .B : commands which were introduced above are available in .I ex. Likewise, most .I ex commands can be invoked from .I vi using :. Just give them without the \fB:\fR and follow them with a \s-2CR\s0. .PP In rare instances, an internal error may occur in .I vi. In this case you will get a diagnostic and be left in the command mode of .I ex. You can then save your work and quit if you wish by giving a command \fBx\fR after the \fB:\fR which \fIex\fR prompts you with, or you can reenter \fIvi\fR by giving .I ex a .I vi command. .PP There are a number of things which you can do more easily in .I ex than in .I vi. Systematic changes in line oriented material are particularly easy. You can read the advanced editing documents for the editor .I ed to find out a lot more about this style of editing. Experienced users often mix their use of .I ex command mode and .I vi command mode to speed the work they are doing. .NH 2 Open mode: vi on hardcopy terminals and ``glass tty's'' \(dd .PP If you are on a hardcopy terminal or a terminal which does not have a cursor which can move off the bottom line, you can still use the command set of .I vi, but in a different mode. When you give a .I vi command, the editor will tell you that it is using .I open mode. This name comes from the .I open command in .I ex, which is used to get into the same mode. .PP The only difference between .I visual mode and .I open mode is the way in which the text is displayed. .PP In .I open mode the editor uses a single line window into the file, and moving backward and forward in the file causes new lines to be displayed, always below the current line. Two commands of .I vi work differently in .I open: .B z and \fB^R\fR. The .B z command does not take parameters, but rather draws a window of context around the current line and then returns you to the current line. .PP If you are on a hardcopy terminal, the .B ^R command will retype the current line. On such terminals, the editor normally uses two lines to represent the current line. The first line is a copy of the line as you started to edit it, and you work on the line below this line. When you delete characters, the editor types a number of \e's to show you the characters which are deleted. The editor also reprints the current line soon after such changes so that you can see what the line looks like again. .PP It is sometimes useful to use this mode on very slow terminals which can support .I vi in the full screen mode. You can do this by entering .I ex and using an .I open command. .LP .SH Acknowledgements .PP Bruce Englar encouraged the early development of this display editor. Peter Kessler helped bring sanity to version 2's command layout. Bill Joy wrote versions 1 and 2.0 through 2.7, and created the framework that users see in the present editor. Mark Horton added macros and other features and made the editor work on a large number of terminals and Unix systems. vigor-0.016.orig/docs/USD.doc/vitut/vi.summary0100644000076400007640000002664107103707243017641 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)vi.summary 8.3 (Berkeley) 8/18/96 .\" .ds CH .ds CF .de TS .br .if !\\n(1T .RT .ul 0 .ti \\n(.iu .if t .sp 0.25 .if n .sp .if \\$1H .TQ .nr IX 1 .. .nr PS 9 .ps 9 .nr VS 11 .vs 11 .nr HM .50i .nr FM .25i .nr PO 1.0i .po 1.0i .nr LL 4.5i .ll 4.5i .de nc .bp .. .de h .LG .B \\$1 .R .NL .. .LG .LG .B .ce Ex Quick Reference .R .NL .LP .LP .h "Entering/leaving ex" .TS aw(1.4i)b aw(1.8i). % ex \fIname\fP edit \fIname\fP, start at end % ex +\fIn\fP \fIname\fP ... at line \fIn\fP % ex \-t \fItag\fP start at \fItag\fP % ex \-r list saved files % ex \-r \fIname\fP recover file \fIname\fP % ex \fIname\fP ... edit first; rest via \fB:n\fP % ex \-R \fIname\fP read only mode : x exit, saving changes : q! exit, discarding changes .TE .h "Ex states" .TS lw(1i) lw(2.0i). Command T{ Normal and initial state. Input prompted for by \fB:\fP. Your kill character cancels partial command. T} Insert T{ Entered by \fBa\fP \fBi\fP and \fBc\fP. Arbitrary text then terminates with line having only \fB.\fP character on it or abnormally with interrupt. T} Open/visual T{ Entered by \fBopen\fP or \fBvi\fP, terminates with \fBQ\fP or ^\e. T} .TE .h "Ex commands" .TS lw(.45i) lw(.08i)b lw(.45i) lw(.08i)b lw(.45i) lw(.08i)b. abbrev ab next n unabbrev una append a number nu undo u args ar open o unmap unm change c preserve pre version ve copy co print p visual vi delete d put pu write w edit e quit q xit x file f read re yank ya global g recover rec \fIwindow\fP z insert i rewind rew \fIescape\fP ! join j set se \fIlshift\fP < list l shell sh \fIprint next\fP \fRCR\fP map source so \fIresubst\fP & mark ma stop st \fIrshift\fP > move m substitute s \fIscroll\fP ^D .TE .h "Ex command addresses" .TS lw(.3i)b lw(0.8i) lw(.3i)b lw(0.8i). \fIn\fP line \fIn\fP /\fIpat\fP next with \fIpat\fP \&. current ?\fIpat\fP previous with \fIpat\fP $ last \fIx\fP-\fIn\fP \fIn\fP before \fIx\fP + next \fIx\fP,\fIy\fP \fIx\fP through \fIy\fP \- previous \(aa\fIx\fP marked with \fIx\fP +\fIn\fP \fIn\fP forward \(aa\(aa previous context % 1,$ .TE .nc .h "Specifying terminal type" .TS aw(1.7i)b aw(1.5i). % setenv TERM \fItype\fP \fIcsh\fP and all version 6 $ TERM=\fItype\fP; export TERM \fIsh\fP in Version 7 See also \fItset\fR(1) .TE .h "Some terminal types" .TS lw(.4i) lw(.4i) lw(.4i) lw(.4i) lw(.4i). 2621 43 adm31 dw1 h19 2645 733 adm3a dw2 i100 300s 745 c100 gt40 mime 33 act4 dm1520 gt42 owl 37 act5 dm2500 h1500 t1061 4014 adm3 dm3025 h1510 vt52 .TE .h "Initializing options" .TS lw(.9i)b aw(1.5i). EXINIT place \fBset\fP's here in environment var. set \fIx\fP enable option set no\fIx\fP disable option set \fIx\fP=\fIval\fP give value \fIval\fP set show changed options set all show all options set \fIx\fP? show value of option \fIx\fP .TE .h "Useful options" .TS lw(.9i)b lw(.3i) lw(1.0i). autoindent ai supply indent autowrite aw write before changing files ignorecase ic in scanning lisp \fB( ) { }\fP are s-exp's list print ^I for tab, $ at end magic \fB. [ *\fP special in patterns number nu number lines paragraphs para macro names which start ... redraw simulate smart terminal scroll command mode lines sections sect macro names ... shiftwidth sw for \fB< >\fP, and input \fB^D\fP showmatch sm to \fB)\fP and \fB}\fP as typed slowopen slow choke updates during insert window visual mode lines wrapscan ws around end of buffer? wrapmargin wm automatic line splitting .TE .LP .h "Scanning pattern formation" .TS aw(.9i)b aw(1.0i). \(ua beginning of line $ end of line \fB.\fR any character \e< beginning of word \e> end of word [\fIstr\fP] any char in \fIstr\fP [\(ua\fIstr\fP] ... not in \fIstr\fP [\fIx\-y\fP] ... between \fIx\fP and \fIy\fP * any number of preceding .TE .nc .LP .LG .LG .B .ce Vi Quick Reference .NL .R .LP .LP .h "Entering/leaving vi" .TS aw(1.4i)b aw(1.8i). % vi \fIname\fP edit \fIname\fP at top % vi +\fIn\fP \fIname\fP ... at line \fIn\fP % vi + \fIname\fP ... at end % vi \-r list saved files % vi \-r \fIname\fP recover file \fIname\fP % vi \fIname\fP ... edit first; rest via \fB:n\fP % vi \-t \fItag\fP start at \fItag\fP % vi +/\fIpat\fP \fIname\fP search for \fIpat\fP % view \fIname\fP read only mode ZZ exit from vi, saving changes ^Z stop vi for later resumption .TE .h "The display" .TS lw(.75i) lw(2.2i). Last line T{ Error messages, echoing input to \fB: / ?\fP and \fB!\fR, feedback about i/o and large changes. T} @ lines On screen only, not in file. ~ lines Lines past end of file. ^\fIx\fP Control characters, ^? is delete. tabs Expand to spaces, cursor at last. .TE .LP .h "Vi states" .TS lw(.75i) lw(2.2i). Command T{ Normal and initial state. Others return here. ESC (escape) cancels partial command. T} Insert T{ Entered by \fBa i A I o O c C s S\fP \fBR\fP. Arbitrary text then terminates with ESC character, or abnormally with interrupt. T} Last line T{ Reading input for \fB: / ?\fP or \fB!\fP; terminate with ESC or CR to execute, interrupt to cancel. T} .TE .h "Counts before vi commands" .TS lw(1.5i) lw(1.7i)b. line/column number z G | scroll amount ^D ^U replicate insert a i A I repeat effect \fRmost rest\fP .TE .h "Simple commands" .TS lw(1.5i)b lw(1.7i). dw delete a word de ... leaving punctuation dd delete a line 3dd ... 3 lines i\fItext\fP\fRESC\fP insert text \fIabc\fP cw\fInew\fP\fRESC\fP change word to \fInew\fP ea\fIs\fP\fRESC\fP pluralize word xp transpose characters .TE .nc .h "Interrupting, cancelling" .TS aw(0.75i)b aw(1.6i). ESC end insert or incomplete cmd ^? (delete or rubout) interrupts ^L reprint screen if \fB^?\fR scrambles it .TE .h "File manipulation" .TS aw(0.75i)b aw(1.6i). :w write back changes :wq write and quit :q quit :q! quit, discard changes :e \fIname\fP edit file \fIname\fP :e! reedit, discard changes :e + \fIname\fP edit, starting at end :e +\fIn\fR edit starting at line \fIn\fR :e # edit alternate file ^\(ua synonym for \fB:e #\fP :w \fIname\fP write file \fIname\fP :w! \fIname\fP overwrite file \fIname\fP :sh run shell, then return :!\fIcmd\fP run \fIcmd\fR, then return :n edit next file in arglist :n \fIargs\fP specify new arglist :f show current file and line ^G synonym for \fB:f\fP :ta \fItag\fP to tag file entry \fItag\fP ^] \fB:ta\fP, following word is \fItag\fP .TE .h "Positioning within file" .TS aw(0.75i)b aw(1.6i). ^F forward screenfull ^B backward screenfull ^D scroll down half screen ^U scroll up half screen G goto line (end default) /\fIpat\fR next line matching \fIpat\fR ?\fIpat\fR prev line matching \fIpat\fR n repeat last \fB/\fR or \fB?\fR N reverse last \fB/\fR or \fB?\fR /\fIpat\fP/+\fIn\fP n'th line after \fIpat\fR ?\fIpat\fP?\-\fIn\fP n'th line before \fIpat\fR ]] next section/function [[ previous section/function % find matching \fB( ) {\fP or \fB}\fP .TE .h "Adjusting the screen" .TS aw(0.75i)b aw(1.6i). ^L clear and redraw ^R retype, eliminate @ lines z\fRCR\fP redraw, current at window top z\- ... at bottom z\|. ... at center /\fIpat\fP/z\- \fIpat\fP line at bottom z\fIn\fP\|. use \fIn\fP line window ^E scroll window down 1 line ^Y scroll window up 1 line .TE .nc .h "Marking and returning .TS aw(0.5i)b aw(2.0i). \(ga\(ga previous context \(aa\(aa ... at first non-white in line m\fIx\fP mark position with letter \fIx\fP \(ga\fIx\fP to mark \fIx\fP \(aa\fIx\fP ... at first non-white in line .TE .h "Line positioning" .TS aw(0.5i)b aw(2.0i). H home window line L last window line M middle window line + next line, at first non-white \- previous line, at first non-white \fRCR\fP return, same as + \(da \fRor\fP j next line, same column \(ua \fRor\fP k previous line, same column .TE .h "Character positioning" .TS aw(0.5i)b aw(2.0i). \(ua first non white 0 beginning of line $ end of line h \fRor\fP \(-> forward l \fRor\fP \(<- backwards ^H same as \fB\(<-\fP \fRspace\fP same as \fB\(->\fP f\fIx\fP find \fIx\fP forward F\fIx\fP \fBf\fR backward t\fIx\fP upto \fIx\fP forward T\fIx\fP back upto \fIx\fP ; repeat last \fBf F t\fP or \fBT\fP , inverse of \fB;\fP | to specified column % find matching \fB( { )\fP or \fB}\fR .TE .h "Words, sentences, paragraphs" .TS aw(0.5i)b aw(2.0i). w word forward b back word e end of word ) to next sentence } to next paragraph ( back sentence { back paragraph W blank delimited word B back \fBW\fP E to end of \fBW\fP .TE .h "Commands for \s-2LISP\s0" .TS aw(0.5i)b aw(2.0i). ) Forward s-expression } ... but don't stop at atoms ( Back s-expression { ... but don't stop at atoms .TE .nc .h "Corrections during insert" .TS aw(.5i)b aw(2.0i). ^H erase last character ^W erases last word \fRerase\fP your erase, same as \fB^H\fP \fRkill\fP your kill, erase input this line \e escapes \fB^H\fR, your erase and kill \fRESC\fP ends insertion, back to command ^? interrupt, terminates insert ^D backtab over \fIautoindent\fP \(ua^D kill \fIautoindent\fP, save for next 0^D ... but at margin next also ^V quote non-printing character .TE .h "Insert and replace" .TS aw(.5i)b aw(2.0i). a append after cursor i insert before A append at end of line I insert before first non-blank o open line below O open above r\fIx\fP replace single char with \fIx\fP R replace characters .TE .h "Operators (double to affect lines)" .TS aw(0.5i)b aw(2.0i). d delete c change < left shift > right shift ! filter through command \&= indent for \s-2LISP\s0 y yank lines to buffer .TE .h "Miscellaneous operations" .TS aw(0.5i)b aw(2.0i). C change rest of line D delete rest of line s substitute chars S substitute lines J join lines x delete characters X ... before cursor Y yank lines .TE .h "Yank and put" .TS aw(0.5i)b aw(2.0i). p put back lines P put before "\fIx\fPp put from buffer \fIx\fP "\fIx\fPy yank to buffer \fIx\fP "\fIx\fPd delete into buffer \fIx\fP .TE .h "Undo, redo, retrieve" .TS aw(0.5i)b aw(2.0i). u undo last change U restore current line \fB.\fP repeat last change "\fId\fP\|p retrieve \fId\fP'th last delete .TE vigor-0.016.orig/docs/USD.doc/exref/0040755000076400007640000000000007103707244015535 5ustar cjw44cjw44vigor-0.016.orig/docs/USD.doc/exref/Makefile0100644000076400007640000000040607103707243017171 0ustar cjw44cjw44# @(#)Makefile 8.8 (Berkeley) 10/10/96 ROFF= groff TBL= tbl all: exref.ps summary.ps exref.ps: ex.rm ${TBL} ex.rm | ${ROFF} -ms > $@ chmod 444 $@ summary.ps: ex.summary ${TBL} ex.summary | ${ROFF} -ms > $@ chmod 444 $@ clean: rm -f exref.ps summary.ps vigor-0.016.orig/docs/USD.doc/exref/ex.rm0100644000076400007640000016363407103707244016523 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)ex.rm 8.5 (Berkeley) 8/18/96 .\" .nr LL 6.5i .nr FL 6.5i .EH 'USD:12-%''Ex Reference Manual' .OH 'Ex Reference Manual''USD:12-%' .nr )P 0 .de ZP .nr pd \\n()P .nr )P 0 .if \\n(.$=0 .IP .if \\n(.$=1 .IP "\\$1" .if \\n(.$>=2 .IP "\\$1" "\\$2" .nr )P \\n(pd .rm pd .. .de LC .br .sp .1i .ne 4 .LP .ta 4.0i .. .bd S B 3 .\".RP .TL Ex Reference Manual .br Version 3.7 .AU William Joy .AU Mark Horton .AI Computer Science Division Department of Electrical Engineering and Computer Science University of California, Berkeley Berkeley, Ca. 94720 .AB .I Ex a line oriented text editor, which supports both command and display oriented editing. This reference manual describes the command oriented part of .I ex; the display editing features of .I ex are described in .I "An Introduction to Display Editing with Vi." Other documents about the editor include the introduction .I "Edit: A tutorial", the .I "Ex/edit Command Summary", and a .I "Vi Quick Reference" card. .AE .NH 1 Starting ex .PP .FS The financial support of an \s-2IBM\s0 Graduate Fellowship and the National Science Foundation under grants MCS74-07644-A03 and MCS78-07291 is gratefully acknowledged. .FE Each instance of the editor has a set of options, which can be set to tailor it to your liking. The command .I edit invokes a version of .I ex designed for more casual or beginning users by changing the default settings of some of these options. To simplify the description which follows we assume the default settings of the options. .PP When invoked, .I ex determines the terminal type from the \s-2TERM\s0 variable in the environment. It there is a \s-2TERMCAP\s0 variable in the environment, and the type of the terminal described there matches the \s-2TERM\s0 variable, then that description is used. Also if the \s-2TERMCAP\s0 variable contains a pathname (beginning with a \fB/\fR) then the editor will seek the description of the terminal in that file (rather than the default /etc/termcap). If there is a variable \s-2EXINIT\s0 in the environment, then the editor will execute the commands in that variable, otherwise if there is a file .I \&.exrc in your \s-2HOME\s0 directory .I ex reads commands from that file, simulating a .I source command. Option setting commands placed in \s-2EXINIT\s0 or .I \&.exrc will be executed before each editor session. .PP A command to enter .I ex has the following prototype:\(dg .FS \(dg Brackets `[' `]' surround optional parameters here. .FE .DS \fBex\fP [ \fB\-\fP ] [ \fB\-v\fP ] [ \fB\-t\fP \fItag\fP ] [ \fB\-r\fP ] [ \fB\-l\fP ] [ \fB\-w\fP\fIn\fP ] [ \fB\-x\fP ] [ \fB\-R\fP ] [ \fB+\fP\fIcommand\fP ] name ... .DE The most common case edits a single file with no options, i.e.: .DS \fBex\fR name .DE The .B \- command line option option suppresses all interactive-user feedback and is useful in processing editor scripts in command files. The .B \-v option is equivalent to using .I vi rather than .I ex. The .B \-t option is equivalent to an initial .I tag command, editing the file containing the .I tag and positioning the editor at its definition. The .B \-r option is used in recovering after an editor or system crash, retrieving the last saved version of the named file or, if no file is specified, typing a list of saved files. The .B \-l option sets up for editing \s-2LISP\s0, setting the .I showmatch and .I lisp options. The .B \-w option sets the default window size to .I n, and is useful on dialups to start in small windows. The .B \-x option causes .I ex to prompt for a .I key , which is used to encrypt and decrypt the contents of the file, which should already be encrypted using the same key, see .I crypt (1). The .B \-R option sets the .I readonly option at the start. .I Name arguments indicate files to be edited. An argument of the form \fB+\fIcommand\fR indicates that the editor should begin by executing the specified command. If .I command is omitted, then it defaults to ``$'', positioning the editor at the last line of the first file initially. Other useful commands here are scanning patterns of the form ``/pat'' or line numbers, e.g. ``+100'' starting at line 100. .NH 1 File manipulation .NH 2 Current file .PP .I Ex is normally editing the contents of a single file, whose name is recorded in the .I current file name. .I Ex performs all editing actions in a buffer (actually a temporary file) into which the text of the file is initially read. Changes made to the buffer have no effect on the file being edited unless and until the buffer contents are written out to the file with a .I write command. After the buffer contents are written, the previous contents of the written file are no longer accessible. When a file is edited, its name becomes the current file name, and its contents are read into the buffer. .PP The current file is almost always considered to be .I edited. This means that the contents of the buffer are logically connected with the current file name, so that writing the current buffer contents onto that file, even if it exists, is a reasonable action. If the current file is not .I edited then .I ex will not normally write on it if it already exists.* .FS * The .I file command will say ``[Not edited]'' if the current file is not considered edited. .FE .NH 2 Alternate file .PP Each time a new value is given to the current file name, the previous current file name is saved as the .I alternate file name. Similarly if a file is mentioned but does not become the current file, it is saved as the alternate file name. .NH 2 Filename expansion .PP Filenames within the editor may be specified using the normal shell expansion conventions. In addition, the character `%' in filenames is replaced by the .I current file name and the character `#' by the .I alternate file name.\(dg .FS \(dg This makes it easy to deal alternately with two files and eliminates the need for retyping the name supplied on an .I edit command after a .I "No write since last change" diagnostic is received. .FE .NH 2 Multiple files and named buffers .PP If more than one file is given on the command line, then the first file is edited as described above. The remaining arguments are placed with the first file in the .I "argument list." The current argument list may be displayed with the .I args command. The next file in the argument list may be edited with the .I next command. The argument list may also be respecified by specifying a list of names to the .I next command. These names are expanded, the resulting list of names becomes the new argument list, and .I ex edits the first file on the list. .PP For saving blocks of text while editing, and especially when editing more than one file, .I ex has a group of named buffers. These are similar to the normal buffer, except that only a limited number of operations are available on them. The buffers have names .I a through .I z.\(dd .FS \(dd It is also possible to refer to .I A through .I Z; the upper case buffers are the same as the lower but commands append to named buffers rather than replacing if upper case names are used. .FE .NH 2 Read only .PP It is possible to use .I ex in .I "read only" mode to look at files that you have no intention of modifying. This mode protects you from accidently overwriting the file. Read only mode is on when the .I readonly option is set. It can be turned on with the .B \-R command line option, by the .I view command line invocation, or by setting the .I readonly option. It can be cleared by setting .I noreadonly . It is possible to write, even while in read only mode, by indicating that you really know what you are doing. You can write to a different file, or can use the ! form of write, even while in read only mode. .NH 1 Exceptional Conditions .NH 2 Errors and interrupts .PP When errors occur .I ex (optionally) rings the terminal bell and, in any case, prints an error diagnostic. If the primary input is from a file, editor processing will terminate. If an interrupt signal is received, .I ex prints ``Interrupt'' and returns to its command level. If the primary input is a file, then .I ex will exit when this occurs. .NH 2 Recovering from hangups and crashes .PP If a hangup signal is received and the buffer has been modified since it was last written out, or if the system crashes, either the editor (in the first case) or the system (after it reboots in the second) will attempt to preserve the buffer. The next time you log in you should be able to recover the work you were doing, losing at most a few lines of changes from the last point before the hangup or editor crash. To recover a file you can use the .B \-r option. If you were editing the file .I resume, then you should change to the directory where you were when the crash occurred, giving the command .DS \fBex \-r\fP\fI resume\fP .DE After checking that the retrieved file is indeed ok, you can .I write it over the previous contents of that file. .PP You will normally get mail from the system telling you when a file has been saved after a crash. The command .DS \fBex\fP \-\fBr\fP .DE will print a list of the files which have been saved for you. (In the case of a hangup, the file will not appear in the list, although it can be recovered.) .NH 1 Editing modes .PP .I Ex has five distinct modes. The primary mode is .I command mode. Commands are entered in command mode when a `:' prompt is present, and are executed each time a complete line is sent. In .I "text input" mode .I ex gathers input lines and places them in the file. The .I append, .I insert, and .I change commands use text input mode. No prompt is printed when you are in text input mode. This mode is left by typing a `.' alone at the beginning of a line, and .I command mode resumes. .PP The last three modes are .I open and .I visual modes, entered by the commands of the same name, and, within open and visual modes .I "text insertion" mode. .I Open and .I visual modes allow local editing operations to be performed on the text in the file. The .I open command displays one line at a time on any terminal while .I visual works on \s-2CRT\s0 terminals with random positioning cursors, using the screen as a (single) window for file editing changes. These modes are described (only) in .I "An Introduction to Display Editing with Vi." .NH Command structure .PP Most command names are English words, and initial prefixes of the words are acceptable abbreviations. The ambiguity of abbreviations is resolved in favor of the more commonly used commands.* .FS * As an example, the command .I substitute can be abbreviated `s' while the shortest available abbreviation for the .I set command is `se'. .FE .NH 2 Command parameters .PP Most commands accept prefix addresses specifying the lines in the file upon which they are to have effect. The forms of these addresses will be discussed below. A number of commands also may take a trailing .I count specifying the number of lines to be involved in the command.\(dg .FS \(dg Counts are rounded down if necessary. .FE Thus the command ``10p'' will print the tenth line in the buffer while ``delete 5'' will delete five lines from the buffer, starting with the current line. .PP Some commands take other information or parameters, this information always being given after the command name.\(dd .FS \(dd Examples would be option names in a .I set command i.e. ``set number'', a file name in an .I edit command, a regular expression in a .I substitute command, or a target address for a .I copy command, i.e. ``1,5 copy 25''. .FE .NH 2 Command variants .PP A number of commands have two distinct variants. The variant form of the command is invoked by placing an `!' immediately after the command name. Some of the default variants may be controlled by options; in this case, the `!' serves to toggle the default. .NH 2 Flags after commands .PP The characters `#', `p' and `l' may be placed after many commands.** .FS ** A `p' or `l' must be preceded by a blank or tab except in the single special case `dp'. .FE In this case, the command abbreviated by these characters is executed after the command completes. Since .I ex normally prints the new current line after each change, `p' is rarely necessary. Any number of `+' or `\-' characters may also be given with these flags. If they appear, the specified offset is applied to the current line value before the printing command is executed. .NH 2 Comments .PP It is possible to give editor commands which are ignored. This is useful when making complex editor scripts for which comments are desired. The comment character is the double quote: ". Any command line beginning with " is ignored. Comments beginning with " may also be placed at the ends of commands, except in cases where they could be confused as part of text (shell escapes and the substitute and map commands). .NH 2 Multiple commands per line .PP More than one command may be placed on a line by separating each pair of commands by a `|' character. However the .I global commands, comments, and the shell escape `!' must be the last command on a line, as they are not terminated by a `|'. .NH 2 Reporting large changes .PP Most commands which change the contents of the editor buffer give feedback if the scope of the change exceeds a threshold given by the .I report option. This feedback helps to detect undesirably large changes so that they may be quickly and easily reversed with an .I undo. After commands with more global effect such as .I global or .I visual, you will be informed if the net change in the number of lines in the buffer during this command exceeds this threshold. .NH 1 Command addressing .NH 2 Addressing primitives .IP \fB.\fR 20 The current line. Most commands leave the current line as the last line which they affect. The default address for most commands is the current line, thus `\fB.\fR' is rarely used alone as an address. .IP \fIn\fR 20 The \fIn\fRth line in the editor's buffer, lines being numbered sequentially from 1. .IP \fB$\fR 20 The last line in the buffer. .IP \fB%\fR 20 An abbreviation for ``1,$'', the entire buffer. .IP \fI+n\fR\ \fI\-n\fR 20 An offset relative to the current buffer line.\(dg .FS \(dg The forms `.+3' `+3' and `+++' are all equivalent; if the current line is line 100 they all address line 103. .FE .IP \fB/\fIpat\fR\fB/\fR\ \fB?\fIpat\fR\fB?\fR 20 Scan forward and backward respectively for a line containing \fIpat\fR, a regular expression (as defined below). The scans normally wrap around the end of the buffer. If all that is desired is to print the next line containing \fIpat\fR, then the trailing \fB/\fR or \fB?\fR may be omitted. If \fIpat\fP is omitted or explicitly empty, then the last regular expression specified is located.\(dd .FS \(dd The forms \fB\e/\fP and \fB\e?\fP scan using the last regular expression used in a scan; after a substitute \fB//\fP and \fB??\fP would scan using the substitute's regular expression. .FE .IP \fB\(aa\(aa\fP\ \fB\(aa\fP\fIx\fP 20 Before each non-relative motion of the current line `\fB.\fP', the previous current line is marked with a tag, subsequently referred to as `\(aa\(aa'. This makes it easy to refer or return to this previous context. Marks may also be established by the .I mark command, using single lower case letters .I x and the marked lines referred to as `\(aa\fIx\fR'. .NH 2 Combining addressing primitives .PP Addresses to commands consist of a series of addressing primitives, separated by `,' or `;'. Such address lists are evaluated left-to-right. When addresses are separated by `;' the current line `\fB.\fR' is set to the value of the previous addressing expression before the next address is interpreted. If more addresses are given than the command requires, then all but the last one or two are ignored. If the command takes two addresses, the first addressed line must precede the second in the buffer.\(dg .FS \(dg Null address specifications are permitted in a list of addresses, the default in this case is the current line `.'; thus `,100' is equivalent to `\fB.\fR,100'. It is an error to give a prefix address to a command which expects none. .FE .NH 1 Command descriptions .PP The following form is a prototype for all .I ex commands: .DS \fIaddress\fR \fBcommand\fR \fI! parameters count flags\fR .DE All parts are optional; the degenerate case is the empty command which prints the next line in the file. For sanity with use from within .I visual mode, .I ex ignores a ``:'' preceding any command. .PP In the following command descriptions, the default addresses are shown in parentheses, which are .I not, however, part of the command. .LC \fBabbreviate\fR \fIword rhs\fP abbr: \fBab\fP .ZP Add the named abbreviation to the current list. When in input mode in visual, if .I word is typed as a complete word, it will be changed to .I rhs . .LC ( \fB.\fR ) \fBappend\fR abbr: \fBa\fR .br \fItext\fR .br \&\fB.\fR .ZP Reads the input text and places it after the specified line. After the command, `\fB.\fR' addresses the last line input or the specified line if no lines were input. If address `0' is given, text is placed at the beginning of the buffer. .LC \fBa!\fR .br \fItext\fR .br \&\fB.\fR .ZP The variant flag to .I append toggles the setting for the .I autoindent option during the input of .I text. .LC \fBargs\fR .ZP The members of the argument list are printed, with the current argument delimited by `[' and `]'. .ig .PP \fBcd\fR \fIdirectory\fR .ZP The .I cd command is a synonym for .I chdir. .. .LC ( \fB.\fP , \fB.\fP ) \fBchange\fP \fIcount\fP abbr: \fBc\fP .br \fItext\fP .br \&\fB.\fP .ZP Replaces the specified lines with the input \fItext\fP. The current line becomes the last line input; if no lines were input it is left as for a \fIdelete\fP. .LC \fBc!\fP .br \fItext\fP .br \&\fB.\fP .ZP The variant toggles .I autoindent during the .I change. .ig .LC \fBchdir\fR \fIdirectory\fR .ZP The specified \fIdirectory\fR becomes the current directory. If no directory is specified, the current value of the .I home option is used as the target directory. After a .I chdir the current file is not considered to have been edited so that write restrictions on pre-existing files apply. .. .LC ( \fB.\fP , \fB.\fP )\|\fBcopy\fP \fIaddr\fP \fIflags\fP abbr: \fBco\fP .ZP A .I copy of the specified lines is placed after .I addr, which may be `0'. The current line `\fB.\fR' addresses the last line of the copy. The command .I t is a synonym for .I copy. .LC ( \fB.\fR , \fB.\fR )\|\fBdelete\fR \fIbuffer\fR \fIcount\fR \fIflags\fR abbr: \fBd\fR .ZP Removes the specified lines from the buffer. The line after the last line deleted becomes the current line; if the lines deleted were originally at the end, the new last line becomes the current line. If a named .I buffer is specified by giving a letter, then the specified lines are saved in that buffer, or appended to it if an upper case letter is used. .LC \fBedit\fR \fIfile\fR abbr: \fBe\fR .br \fBex\fR \fIfile\fR .ZP Used to begin an editing session on a new file. The editor first checks to see if the buffer has been modified since the last .I write command was issued. If it has been, a warning is issued and the command is aborted. The command otherwise deletes the entire contents of the editor buffer, makes the named file the current file and prints the new filename. After insuring that this file is sensible\(dg .FS \(dg I.e., that it is not a binary file such as a directory, a block or character special file other than .I /dev/tty, a terminal, or a binary or executable file (as indicated by the first word). .FE the editor reads the file into its buffer. .IP If the read of the file completes without error, the number of lines and characters read is typed. If there were any non-\s-2ASCII\s0 characters in the file they are stripped of their non-\s-2ASCII\s0 high bits, and any null characters in the file are discarded. If none of these errors occurred, the file is considered .I edited. If the last line of the input file is missing the trailing newline character, it will be supplied and a complaint will be issued. This command leaves the current line `\fB.\fR' at the last line read.\(dd .FS \(dd If executed from within .I open or .I visual, the current line is initially the first line of the file. .FE .LC \fBe!\fR \fIfile\fR .ZP The variant form suppresses the complaint about modifications having been made and not written from the editor buffer, thus discarding all changes which have been made before editing the new file. .LC \fBe\fR \fB+\fIn\fR \fIfile\fR .ZP Causes the editor to begin at line .I n rather than at the last line; \fIn\fR may also be an editor command containing no spaces, e.g.: ``+/pat''. .LC \fBfile\fR abbr: \fBf\fR .ZP Prints the current file name, whether it has been `[Modified]' since the last .I write command, whether it is .I "read only" , the current line, the number of lines in the buffer, and the percentage of the way through the buffer of the current line.* .FS * In the rare case that the current file is `[Not edited]' this is noted also; in this case you have to use the form \fBw!\fR to write to the file, since the editor is not sure that a \fBwrite\fR will not destroy a file unrelated to the current contents of the buffer. .FE .LC \fBfile\fR \fIfile\fR .ZP The current file name is changed to .I file which is considered `[Not edited]'. .LC ( 1 , $ ) \fBglobal\fR /\fIpat\|\fR/ \fIcmds\fR abbr: \fBg\fR .ZP First marks each line among those specified which matches the given regular expression. Then the given command list is executed with `\fB.\fR' initially set to each marked line. .IP The command list consists of the remaining commands on the current input line and may continue to multiple lines by ending all but the last such line with a `\e'. If .I cmds (and possibly the trailing \fB/\fR delimiter) is omitted, each line matching .I pat is printed. .I Append, .I insert, and .I change commands and associated input are permitted; the `\fB.\fR' terminating input may be omitted if it would be on the last line of the command list. .I Open and .I visual commands are permitted in the command list and take input from the terminal. .IP The .I global command itself may not appear in .I cmds. The .I undo command is also not permitted there, as .I undo instead can be used to reverse the entire .I global command. The options .I autoprint and .I autoindent are inhibited during a .I global, (and possibly the trailing \fB/\fR delimiter) and the value of the .I report option is temporarily infinite, in deference to a \fIreport\fR for the entire global. Finally, the context mark `\'\'' is set to the value of `.' before the global command begins and is not changed during a global command, except perhaps by an .I open or .I visual within the .I global. .LC \fBg!\fR \fB/\fIpat\fB/\fR \fIcmds\fR abbr: \fBv\fR .IP The variant form of \fIglobal\fR runs \fIcmds\fR at each line not matching \fIpat\fR. .LC ( \fB.\fR )\|\fBinsert\fR abbr: \fBi\fR .br \fItext\fR .br \&\fB.\fR .ZP Places the given text before the specified line. The current line is left at the last line input; if there were none input it is left at the line before the addressed line. This command differs from .I append only in the placement of text. .KS .LC \fBi!\fR .br \fItext\fR .br \&\fB.\fR .ZP The variant toggles .I autoindent during the .I insert. .KE .LC ( \fB.\fR , \fB.\fR+1 ) \fBjoin\fR \fIcount\fR \fIflags\fR abbr: \fBj\fR .ZP Places the text from a specified range of lines together on one line. White space is adjusted at each junction to provide at least one blank character, two if there was a `\fB.\fR' at the end of the line, or none if the first following character is a `)'. If there is already white space at the end of the line, then the white space at the start of the next line will be discarded. .LC \fBj!\fR .ZP The variant causes a simpler .I join with no white space processing; the characters in the lines are simply concatenated. .LC ( \fB.\fR ) \fBk\fR \fIx\fR .ZP The .I k command is a synonym for .I mark. It does not require a blank or tab before the following letter. .LC ( \fB.\fR , \fB.\fR ) \fBlist\fR \fIcount\fR \fIflags\fR .ZP Prints the specified lines in a more unambiguous way: tabs are printed as `^I' and the end of each line is marked with a trailing `$'. The current line is left at the last line printed. .LC \fBmap\fR \fIlhs\fR \fIrhs\fR .ZP The .I map command is used to define macros for use in .I visual mode. .I Lhs should be a single character, or the sequence ``#n'', for n a digit, referring to function key \fIn\fR. When this character or function key is typed in .I visual mode, it will be as though the corresponding \fIrhs\fR had been typed. On terminals without function keys, you can type ``#n''. See section 6.9 of the ``Introduction to Display Editing with Vi'' for more details. .LC ( \fB.\fR ) \fBmark\fR \fIx\fR .ZP Gives the specified line mark .I x, a single lower case letter. The .I x must be preceded by a blank or a tab. The addressing form `\'x' then addresses this line. The current line is not affected by this command. .LC ( \fB.\fR , \fB.\fR ) \fBmove\fR \fIaddr\fR abbr: \fBm\fR .ZP The .I move command repositions the specified lines to be after .I addr . The first of the moved lines becomes the current line. .LC \fBnext\fR abbr: \fBn\fR .ZP The next file from the command line argument list is edited. .LC \fBn!\fR .ZP The variant suppresses warnings about the modifications to the buffer not having been written out, discarding (irretrievably) any changes which may have been made. .LC \fBn\fR \fIfilelist\fR .br \fBn\fR \fB+\fIcommand\fR \fIfilelist\fR .ZP The specified .I filelist is expanded and the resulting list replaces the current argument list; the first file in the new list is then edited. If .I command is given (it must contain no spaces), then it is executed after editing the first such file. .LC ( \fB.\fR , \fB.\fR ) \fBnumber\fR \fIcount\fR \fIflags\fR abbr: \fB#\fR or \fBnu\fR .ZP Prints each specified line preceded by its buffer line number. The current line is left at the last line printed. .KS .LC ( \fB.\fR ) \fBopen\fR \fIflags\fR abbr: \fBo\fR .br ( \fB.\fR ) \fBopen\fR /\fIpat\|\fR/ \fIflags\fR .ZP Enters intraline editing \fIopen\fR mode at each addressed line. If .I pat is given, then the cursor will be placed initially at the beginning of the string matched by the pattern. To exit this mode use Q. See .I "An Introduction to Display Editing with Vi" for more details. .KE .LC \fBpreserve\fR .ZP The current editor buffer is saved as though the system had just crashed. This command is for use only in emergencies when a .I write command has resulted in an error and you don't know how to save your work. After a .I preserve you should seek help. .LC ( \fB.\fR , \fB.\fR )\|\fBprint\fR \fIcount\fR abbr: \fBp\fR or \fBP\fR .ZP Prints the specified lines with non-printing characters printed as control characters `^\fIx\fR\|'; delete (octal 177) is represented as `^?'. The current line is left at the last line printed. .LC ( \fB.\fR )\|\fBput\fR \fIbuffer\fR abbr: \fBpu\fR .ZP Puts back previously .I deleted or .I yanked lines. Normally used with .I delete to effect movement of lines, or with .I yank to effect duplication of lines. If no .I buffer is specified, then the last .I deleted or .I yanked text is restored.* .FS * But no modifying commands may intervene between the .I delete or .I yank and the .I put, nor may lines be moved between files without using a named buffer. .FE By using a named buffer, text may be restored that was saved there at any previous time. .LC \fBquit\fR abbr: \fBq\fR .ZP Causes .I ex to terminate. No automatic write of the editor buffer to a file is performed. However, .I ex issues a warning message if the file has changed since the last .I write command was issued, and does not .I quit.\(dg .FS \(dg \fIEx\fR will also issue a diagnostic if there are more files in the argument list. .FE Normally, you will wish to save your changes, and you should give a \fIwrite\fR command; if you wish to discard them, use the \fBq!\fR command variant. .LC \fBq!\fR .ZP Quits from the editor, discarding changes to the buffer without complaint. .LC ( \fB.\fR ) \fBread\fR \fIfile\fR abbr: \fBr\fR .ZP Places a copy of the text of the given file in the editing buffer after the specified line. If no .I file is given the current file name is used. The current file name is not changed unless there is none in which case .I file becomes the current name. The sensibility restrictions for the .I edit command apply here also. If the file buffer is empty and there is no current name then .I ex treats this as an .I edit command. .IP Address `0' is legal for this command and causes the file to be read at the beginning of the buffer. Statistics are given as for the .I edit command when the .I read successfully terminates. After a .I read the current line is the last line read.\(dd .FS \(dd Within .I open and .I visual the current line is set to the first line read rather than the last. .FE .LC ( \fB.\fR ) \fBread\fR \fB!\fR\fIcommand\fR .ZP Reads the output of the command .I command into the buffer after the specified line. This is not a variant form of the command, rather a read specifying a .I command rather than a .I filename; a blank or tab before the \fB!\fR is mandatory. .LC \fBrecover \fIfile\fR .ZP Recovers .I file from the system save area. Used after a accidental hangup of the phone** .FS ** The system saves a copy of the file you were editing only if you have made changes to the file. .FE or a system crash** or .I preserve command. Except when you use .I preserve you will be notified by mail when a file is saved. .LC \fBrewind\fR abbr: \fBrew\fR .ZP The argument list is rewound, and the first file in the list is edited. .LC \fBrew!\fR .ZP Rewinds the argument list discarding any changes made to the current buffer. .LC \fBset\fR \fIparameter\fR .ZP With no arguments, prints those options whose values have been changed from their defaults; with parameter .I all it prints all of the option values. .IP Giving an option name followed by a `?' causes the current value of that option to be printed. The `?' is unnecessary unless the option is Boolean valued. Boolean options are given values either by the form `set \fIoption\fR' to turn them on or `set no\fIoption\fR' to turn them off; string and numeric options are assigned via the form `set \fIoption\fR=value'. .IP More than one parameter may be given to .I set \|; they are interpreted left-to-right. .LC \fBshell\fR abbr: \fBsh\fR .IP A new shell is created. When it terminates, editing resumes. .LC \fBsource\fR \fIfile\fR abbr: \fBso\fR .IP Reads and executes commands from the specified file. .I Source commands may be nested. .LC ( \fB.\fR , \fB.\fR ) \fBsubstitute\fR /\fIpat\fR\|/\fIrepl\fR\|/ \fIoptions\fR \fIcount\fR \fIflags\fR abbr: \fBs\fR .IP On each specified line, the first instance of pattern .I pat is replaced by replacement pattern .I repl. If the .I global indicator option character `g' appears, then all instances are substituted; if the .I confirm indication character `c' appears, then before each substitution the line to be substituted is typed with the string to be substituted marked with `\(ua' characters. By typing an `y' one can cause the substitution to be performed, any other input causes no change to take place. After a .I substitute the current line is the last line substituted. .IP Lines may be split by substituting new-line characters into them. The newline in .I repl must be escaped by preceding it with a `\e'. Other metacharacters available in .I pat and .I repl are described below. .LC .B stop .ZP Suspends the editor, returning control to the top level shell. If .I autowrite is set and there are unsaved changes, a write is done first unless the form .B stop ! is used. This commands is only available where supported by the teletype driver and operating system. .LC ( \fB.\fR , \fB.\fR ) \fBsubstitute\fR \fIoptions\fR \fIcount\fR \fIflags\fR abbr: \fBs\fR .ZP If .I pat and .I repl are omitted, then the last substitution is repeated. This is a synonym for the .B & command. .LC ( \fB.\fR , \fB.\fR ) \fBt\fR \fIaddr\fR \fIflags\fR .ZP The .I t command is a synonym for .I copy . .LC \fBta\fR \fItag\fR .ZP The focus of editing switches to the location of .I tag, switching to a different line in the current file where it is defined, or if necessary to another file.\(dd .FS \(dd If you have modified the current file before giving a .I tag command, you must write it out; giving another .I tag command, specifying no .I tag will reuse the previous tag. .FE .IP The tags file is normally created by a program such as .I ctags, and consists of a number of lines with three fields separated by blanks or tabs. The first field gives the name of the tag, the second the name of the file where the tag resides, and the third gives an addressing form which can be used by the editor to find the tag; this field is usually a contextual scan using `/\fIpat\fR/' to be immune to minor changes in the file. Such scans are always performed as if .I nomagic was set. .PP The tag names in the tags file must be sorted alphabetically. .LC \fBunabbreviate\fR \fIword\fP abbr: \fBuna\fP .ZP Delete .I word from the list of abbreviations. .LC \fBundo\fR abbr: \fBu\fR .ZP Reverses the changes made in the buffer by the last buffer editing command. Note that .I global commands are considered a single command for the purpose of .I undo (as are .I open and .I visual.) Also, the commands .I write and .I edit which interact with the file system cannot be undone. .I Undo is its own inverse. .IP .I Undo always marks the previous value of the current line `\fB.\fR' as `\'\''. After an .I undo the current line is the first line restored or the line before the first line deleted if no lines were restored. For commands with more global effect such as .I global and .I visual the current line regains it's pre-command value after an .I undo. .LC \fBunmap\fR \fIlhs\fR .ZP The macro expansion associated by .I map for .I lhs is removed. .LC ( 1 , $ ) \fBv\fR /\fIpat\fR\|/ \fIcmds\fR .ZP A synonym for the .I global command variant \fBg!\fR, running the specified \fIcmds\fR on each line which does not match \fIpat\fR. .LC \fBversion\fR abbr: \fBve\fR .ZP Prints the current version number of the editor as well as the date the editor was last changed. .LC ( \fB.\fR ) \fBvisual\fR \fItype\fR \fIcount\fR \fIflags\fR abbr: \fBvi\fR .ZP Enters visual mode at the specified line. .I Type is optional and may be `\-' , `\(ua' or `\fB.\fR' as in the .I z command to specify the placement of the specified line on the screen. By default, if .I type is omitted, the specified line is placed as the first on the screen. A .I count specifies an initial window size; the default is the value of the option .I window. See the document .I "An Introduction to Display Editing with Vi" for more details. To exit this mode, type Q. .LC \fBvisual\fP file .br \fBvisual\fP +\fIn\fP file .ZP From visual mode, this command is the same as edit. .LC ( 1 , $ ) \fBwrite\fR \fIfile\fR abbr: \fBw\fR .ZP Writes changes made back to \fIfile\fR, printing the number of lines and characters written. Normally \fIfile\fR is omitted and the text goes back where it came from. If a \fIfile\fR is specified, then text will be written to that file.* .FS * The editor writes to a file only if it is the current file and is .I edited , if the file does not exist, or if the file is actually a teletype, .I /dev/tty, .I /dev/null. Otherwise, you must give the variant form \fBw!\fR to force the write. .FE If the file does not exist it is created. The current file name is changed only if there is no current file name; the current line is never changed. .IP If an error occurs while writing the current and .I edited file, the editor considers that there has been ``No write since last change'' even if the buffer had not previously been modified. .LC ( 1 , $ ) \fBwrite>>\fR \fIfile\fR abbr: \fBw>>\fR .ZP Writes the buffer contents at the end of an existing file. .IP .LC \fBw!\fR \fIname\fR .ZP Overrides the checking of the normal \fIwrite\fR command, and will write to any file which the system permits. .LC ( 1 , $ ) \fBw\fR \fB!\fR\fIcommand\fR .ZP Writes the specified lines into .I command. Note the difference between \fBw!\fR which overrides checks and \fBw\ \ !\fR which writes to a command. .LC \fBwq\fR \fIname\fR .ZP Like a \fIwrite\fR and then a \fIquit\fR command. .LC \fBwq!\fR \fIname\fR .ZP The variant overrides checking on the sensibility of the .I write command, as \fBw!\fR does. .LC \fBxit\fP \fIname\fR .ZP If any changes have been made and not written, writes the buffer out. Then, in any case, quits. .LC ( \fB.\fR , \fB.\fR )\|\fByank\fR \fIbuffer\fR \fIcount\fR abbr: \fBya\fR .ZP Places the specified lines in the named .I buffer, for later retrieval via .I put. If no buffer name is specified, the lines go to a more volatile place; see the \fIput\fR command description. .LC ( \fB.+1\fR ) \fBz\fR \fIcount\fR .ZP Print the next \fIcount\fR lines, default \fIwindow\fR. .LC ( \fB.\fR ) \fBz\fR \fItype\fR \fIcount\fR .ZP Prints a window of text with the specified line at the top. If \fItype\fR is `\-' the line is placed at the bottom; a `\fB.\fR' causes the line to be placed in the center.* A count gives the number of lines to be displayed rather than double the number specified by the \fIscroll\fR option. On a \s-2CRT\s0 the screen is cleared before display begins unless a count which is less than the screen size is given. The current line is left at the last line printed. .FS * Forms `z=' and `z\(ua' also exist; `z=' places the current line in the center, surrounds it with lines of `\-' characters and leaves the current line at this line. The form `z\(ua' prints the window before `z\-' would. The characters `+', `\(ua' and `\-' may be repeated for cumulative effect. On some v2 editors, no .I type may be given. .FE .LC \fB!\fR \fIcommand\fR\fR .ZP The remainder of the line after the `!' character is sent to a shell to be executed. Within the text of .I command the characters `%' and `#' are expanded as in filenames and the character `!' is replaced with the text of the previous command. Thus, in particular, `!!' repeats the last such shell escape. If any such expansion is performed, the expanded line will be echoed. The current line is unchanged by this command. .IP If there has been ``[No\ write]'' of the buffer contents since the last change to the editing buffer, then a diagnostic will be printed before the command is executed as a warning. A single `!' is printed when the command completes. .LC ( \fIaddr\fR , \fIaddr\fR ) \fB!\fR \fIcommand\fR\fR .ZP Takes the specified address range and supplies it as standard input to .I command; the resulting output then replaces the input lines. .LC ( $ ) \fB=\fR .ZP Prints the line number of the addressed line. The current line is unchanged. .KS .LC ( \fB.\fR , \fB.\fR ) \fB>\fR \fIcount\fR \fIflags\fR .br ( \fB.\fR , \fB.\fR ) \fB<\fR \fIcount\fR \fIflags\fR .IP Perform intelligent shifting on the specified lines; \fB<\fR shifts left and \fB>\fR shift right. The quantity of shift is determined by the .I shiftwidth option and the repetition of the specification character. Only white space (blanks and tabs) is shifted; no non-white characters are discarded in a left-shift. The current line becomes the last line which changed due to the shifting. .KE .LC \fB^D\fR .ZP An end-of-file from a terminal input scrolls through the file. The .I scroll option specifies the size of the scroll, normally a half screen of text. .LC ( \fB.\fR+1 , \fB.\fR+1 ) .br ( \fB.\fR+1 , \fB.\fR+1 ) | .ZP An address alone causes the addressed lines to be printed. A blank line prints the next line in the file. .LC ( \fB.\fR , \fB.\fR ) \fB&\fR \fIoptions\fR \fIcount\fR \fIflags\fR .ZP Repeats the previous .I substitute command. .LC ( \fB.\fR , \fB.\fR ) \fB\s+2~\s0\fR \fIoptions\fR \fIcount\fR \fIflags\fR .ZP Replaces the previous regular expression with the previous replacement pattern from a substitution. .NH 1 Regular expressions and substitute replacement patterns .NH 2 Regular expressions .PP A regular expression specifies a set of strings of characters. A member of this set of strings is said to be .I matched by the regular expression. .I Ex remembers two previous regular expressions: the previous regular expression used in a .I substitute command and the previous regular expression used elsewhere (referred to as the previous \fIscanning\fR regular expression.) The previous regular expression can always be referred to by a null \fIre\fR, e.g. `//' or `??'. .NH 2 Magic and nomagic .PP The regular expressions allowed by .I ex are constructed in one of two ways depending on the setting of the .I magic option. The .I ex and .I vi default setting of .I magic gives quick access to a powerful set of regular expression metacharacters. The disadvantage of .I magic is that the user must remember that these metacharacters are .I magic and precede them with the character `\e' to use them as ``ordinary'' characters. With .I nomagic, the default for .I edit, regular expressions are much simpler, there being only two metacharacters. The power of the other metacharacters is still available by preceding the (now) ordinary character with a `\e'. Note that `\e' is thus always a metacharacter. .PP The remainder of the discussion of regular expressions assumes that that the setting of this option is .I magic.\(dg .FS \(dg To discern what is true with .I nomagic it suffices to remember that the only special characters in this case will be `\(ua' at the beginning of a regular expression, `$' at the end of a regular expression, and `\e'. With .I nomagic the characters `\s+2~\s0' and `&' also lose their special meanings related to the replacement pattern of a substitute. .FE .NH 2 Basic regular expression summary .PP The following basic constructs are used to construct .I magic mode regular expressions. .IP \fIchar\fR 15 An ordinary character matches itself. The characters `\(ua' at the beginning of a line, `$' at the end of line, `*' as any character other than the first, `.', `\e', `[', and `\s+2~\s0' are not ordinary characters and must be escaped (preceded) by `\e' to be treated as such. .IP \fB\(ua\fR At the beginning of a pattern forces the match to succeed only at the beginning of a line. .IP \fB$\fR At the end of a regular expression forces the match to succeed only at the end of the line. .IP \&\fB.\fR Matches any single character except the new-line character. .IP \fB\e<\fR Forces the match to occur only at the beginning of a ``variable'' or ``word''; that is, either at the beginning of a line, or just before a letter, digit, or underline and after a character not one of these. .IP \fB\e>\fR Similar to `\e<', but matching the end of a ``variable'' or ``word'', i.e. either the end of the line or before character which is neither a letter, nor a digit, nor the underline character. .IP \fB[\fIstring\fR]\fR Matches any (single) character in the class defined by .I string. Most characters in .I string define themselves. A pair of characters separated by `\-' in .I string defines the set of characters collating between the specified lower and upper bounds, thus `[a\-z]' as a regular expression matches any (single) lower-case letter. If the first character of .I string is an `\(ua' then the construct matches those characters which it otherwise would not; thus `[\(uaa\-z]' matches anything but a lower-case letter (and of course a newline). To place any of the characters `\(ua', `[', or `\-' in .I string you must escape them with a preceding `\e'. .NH 2 Combining regular expression primitives .PP The concatenation of two regular expressions matches the leftmost and then longest string which can be divided with the first piece matching the first regular expression and the second piece matching the second. Any of the (single character matching) regular expressions mentioned above may be followed by the character `*' to form a regular expression which matches any number of adjacent occurrences (including 0) of characters matched by the regular expression it follows. .PP The character `\s+2~\s0' may be used in a regular expression, and matches the text which defined the replacement part of the last .I substitute command. A regular expression may be enclosed between the sequences `\e(' and `\e)' with side effects in the .I substitute replacement patterns. .NH 2 Substitute replacement patterns .PP The basic metacharacters for the replacement pattern are `&' and `~'; these are given as `\e&' and `\e~' when .I nomagic is set. Each instance of `&' is replaced by the characters which the regular expression matched. The metacharacter `~' stands, in the replacement pattern, for the defining text of the previous replacement pattern. .PP Other metasequences possible in the replacement pattern are always introduced by the escaping character `\e'. The sequence `\e\fIn\fR' is replaced by the text matched by the \fIn\fR-th regular subexpression enclosed between `\e(' and `\e)'.\(dg .FS \(dg When nested, parenthesized subexpressions are present, \fIn\fR is determined by counting occurrences of `\e(' starting from the left. .FE The sequences `\eu' and `\el' cause the immediately following character in the replacement to be converted to upper- or lower-case respectively if this character is a letter. The sequences `\eU' and `\eL' turn such conversion on, either until `\eE' or `\ee' is encountered, or until the end of the replacement pattern. .de LC .br .sp .1i .ne 4 .LP .ta 3i .. .NH 1 Option descriptions .PP .LC \fBautoindent\fR, \fBai\fR default: noai .ZP Can be used to ease the preparation of structured program text. At the beginning of each .I append , .I change or .I insert command or when a new line is .I opened or created by an .I append , .I change , .I insert , or .I substitute operation within .I open or .I visual mode, .I ex looks at the line being appended after, the first line changed or the line inserted before and calculates the amount of white space at the start of the line. It then aligns the cursor at the level of indentation so determined. .IP If the user then types lines of text in, they will continue to be justified at the displayed indenting level. If more white space is typed at the beginning of a line, the following line will start aligned with the first non-white character of the previous line. To back the cursor up to the preceding tab stop one can hit \fB^D\fR. The tab stops going backwards are defined at multiples of the .I shiftwidth option. You .I cannot backspace over the indent, except by sending an end-of-file with a \fB^D\fR. .IP Specially processed in this mode is a line with no characters added to it, which turns into a completely blank line (the white space provided for the .I autoindent is discarded.) Also specially processed in this mode are lines beginning with an `\(ua' and immediately followed by a \fB^D\fR. This causes the input to be repositioned at the beginning of the line, but retaining the previous indent for the next line. Similarly, a `0' followed by a \fB^D\fR repositions at the beginning but without retaining the previous indent. .IP .I Autoindent doesn't happen in .I global commands or when the input is not a terminal. .LC \fBautoprint\fR, \fBap\fR default: ap .ZP Causes the current line to be printed after each .I delete , .I copy , .I join , .I move , .I substitute , .I t , .I undo or shift command. This has the same effect as supplying a trailing `p' to each such command. .I Autoprint is suppressed in globals, and only applies to the last of many commands on a line. .LC \fBautowrite\fR, \fBaw\fR default: noaw .ZP Causes the contents of the buffer to be written to the current file if you have modified it and give a .I next, .I rewind, .I stop, .I tag, or .I ! command, or a \fB^\(ua\fR (switch files) or \fB^]\fR (tag goto) command in .I visual. Note, that the .I edit and .I ex commands do .B not autowrite. In each case, there is an equivalent way of switching when autowrite is set to avoid the .I autowrite (\fIedit\fR for .I next , .I rewind! for .I rewind , .I stop! for .I stop , .I tag! for .I tag , .I shell for .I ! , and \fB:e\ #\fR and a \fB:ta!\fR command from within .I visual). .LC \fBbeautify\fR, \fBbf\fR default: nobeautify .ZP Causes all control characters except tab, newline and form-feed to be discarded from the input. A complaint is registered the first time a backspace character is discarded. .I Beautify does not apply to command input. .LC \fBdirectory\fR, \fBdir\fR default: dir=/tmp .ZP Specifies the directory in which .I ex places its buffer file. If this directory in not writable, then the editor will exit abruptly when it fails to be able to create its buffer there. .LC \fBedcompatible\fR default: noedcompatible .ZP Causes the presence of absence of .B g and .B c suffixes on substitute commands to be remembered, and to be toggled by repeating the suffices. The suffix .B r makes the substitution be as in the .I ~ command, instead of like .I &. .LC \fBerrorbells\fR, \fBeb\fR default: noeb .ZP Error messages are preceded by a bell.* .FS * Bell ringing in .I open and .I visual on errors is not suppressed by setting .I noeb. .FE If possible the editor always places the error message in a standout mode of the terminal (such as inverse video) instead of ringing the bell. .LC \fBhardtabs\fR, \fBht\fR default: ht=8 .ZP Gives the boundaries on which terminal hardware tabs are set (or on which the system expands tabs). .LC \fBignorecase\fR, \fBic\fR default: noic .ZP All upper case characters in the text are mapped to lower case in regular expression matching. In addition, all upper case characters in regular expressions are mapped to lower case except in character class specifications. .LC \fBlisp\fR default: nolisp .ZP \fIAutoindent\fR indents appropriately for .I lisp code, and the \fB( ) { } [[\fR and \fB]]\fR commands in .I open and .I visual are modified to have meaning for \fIlisp\fR. .LC \fBlist\fR default: nolist .ZP All printed lines will be displayed (more) unambiguously, showing tabs and end-of-lines as in the .I list command. .LC \fBmagic\fR default: magic for \fIex\fR and \fIvi\fR\(dg .FS \(dg \fINomagic\fR for \fIedit\fR. .FE .ZP If .I nomagic is set, the number of regular expression metacharacters is greatly reduced, with only `\(ua' and `$' having special effects. In addition the metacharacters `~' and `&' of the replacement pattern are treated as normal characters. All the normal metacharacters may be made .I magic when .I nomagic is set by preceding them with a `\e'. .LC \fBmesg\fR default: mesg .ZP Causes write permission to be turned off to the terminal while you are in visual mode, if .I nomesg is set. .LC \fBmodeline\fR default: nomodeline .ZP If .I modeline is set, then the first 5 lines and the last five lines of the file will be checked for ex command lines and the comands issued. To be recognized as a command line, the line must have the string .B ex: or .B vi: preceeded by a tab or a space. This string may be anywhere in the line and anything after the .I : is interpeted as editor commands. This option defaults to off because of unexpected behavior when editting files such as .I /etc/passwd. .LC \fBnumber, nu\fR default: nonumber .ZP Causes all output lines to be printed with their line numbers. In addition each input line will be prompted for by supplying the line number it will have. .LC \fBopen\fR default: open .ZP If \fInoopen\fR, the commands .I open and .I visual are not permitted. This is set for .I edit to prevent confusion resulting from accidental entry to open or visual mode. .LC \fBoptimize, opt\fR default: optimize .ZP Throughput of text is expedited by setting the terminal to not do automatic carriage returns when printing more than one (logical) line of output, greatly speeding output on terminals without addressable cursors when text with leading white space is printed. .LC \fBparagraphs,\ para\fR default: para=IPLPPPQPP\0LIbp .ZP Specifies the paragraphs for the \fB{\fR and \fB}\fR operations in .I open and .I visual. The pairs of characters in the option's value are the names of the macros which start paragraphs. .LC \fBprompt\fR default: prompt .ZP Command mode input is prompted for with a `:'. .LC \fBredraw\fR default: noredraw .ZP The editor simulates (using great amounts of output), an intelligent terminal on a dumb terminal (e.g. during insertions in .I visual the characters to the right of the cursor position are refreshed as each input character is typed.) Useful only at very high speed. .LC \fBremap\fP default: remap .ZP If on, macros are repeatedly tried until they are unchanged. For example, if .B o is mapped to .B O , and .B O is mapped to .B I , then if .I remap is set, .B o will map to .B I , but if .I noremap is set, it will map to .B O . .LC \fBreport\fR default: report=5\(dg .FS \(dg 2 for \fIedit\fR. .FE .ZP Specifies a threshold for feedback from commands. Any command which modifies more than the specified number of lines will provide feedback as to the scope of its changes. For commands such as .I global , .I open , .I undo , and .I visual which have potentially more far reaching scope, the net change in the number of lines in the buffer is presented at the end of the command, subject to this same threshold. Thus notification is suppressed during a .I global command on the individual commands performed. .LC \fBscroll\fR default: scroll=\(12 window .ZP Determines the number of logical lines scrolled when an end-of-file is received from a terminal input in command mode, and the number of lines printed by a command mode .I z command (double the value of .I scroll ). .LC \fBsections\fR default: sections=SHNHH\0HU .ZP Specifies the section macros for the \fB[[\fR and \fB]]\fR operations in .I open and .I visual. The pairs of characters in the options's value are the names of the macros which start paragraphs. .LC \fBshell\fR, \fBsh\fR default: sh=/bin/sh .ZP Gives the path name of the shell forked for the shell escape command `!', and by the .I shell command. The default is taken from SHELL in the environment, if present. .LC \fBshiftwidth\fR, \fBsw\fR default: sw=8 .ZP Gives the width a software tab stop, used in reverse tabbing with \fB^D\fR when using .I autoindent to append text, and by the shift commands. .LC \fBshowmatch, sm\fR default: nosm .ZP In .I open and .I visual mode, when a \fB)\fR or \fB}\fR is typed, move the cursor to the matching \fB(\fR or \fB{\fR for one second if this matching character is on the screen. Extremely useful with .I lisp. .LC \fBslowopen, slow\fR terminal dependent .ZP Affects the display algorithm used in .I visual mode, holding off display updating during input of new text to improve throughput when the terminal in use is both slow and unintelligent. See .I "An Introduction to Display Editing with Vi" for more details. .LC \fBtabstop,\ ts\fR default: ts=8 .ZP The editor expands tabs in the input file to be on .I tabstop boundaries for the purposes of display. .LC \fBtaglength,\ tl\fR default: tl=0 .ZP Tags are not significant beyond this many characters. A value of zero (the default) means that all characters are significant. .LC \fBtags\fR default: tags=tags /usr/lib/tags .ZP A path of files to be used as tag files for the .I tag command. A requested tag is searched for in the specified files, sequentially. By default, files called .B tags are searched for in the current directory and in /usr/lib (a master file for the entire system). .LC \fBterm\fR from environment TERM .ZP The terminal type of the output device. .LC \fBterse\fR default: noterse .ZP Shorter error diagnostics are produced for the experienced user. .LC \fBwarn\fR default: warn .ZP Warn if there has been `[No write since last change]' before a `!' command escape. .LC \fBwindow\fR default: window=speed dependent .ZP The number of lines in a text window in the .I visual command. The default is 8 at slow speeds (600 baud or less), 16 at medium speed (1200 baud), and the full screen (minus one line) at higher speeds. .LC \fBw300,\ w1200\, w9600\fR .ZP These are not true options but set .B window only if the speed is slow (300), medium (1200), or high (9600), respectively. They are suitable for an EXINIT and make it easy to change the 8/16/full screen rule. .LC \fBwrapscan\fR, \fBws\fR default: ws .ZP Searches using the regular expressions in addressing will wrap around past the end of the file. .LC \fBwrapmargin\fR, \fBwm\fR default: wm=0 .ZP Defines a margin for automatic wrapover of text during input in .I open and .I visual modes. See .I "An Introduction to Text Editing with Vi" for details. .LC \fBwriteany\fR, \fBwa\fR default: nowa .IP Inhibit the checks normally made before .I write commands, allowing a write to any file which the system protection mechanism will allow. .NH 1 Acknowledgements .PP Chuck Haley contributed greatly to the early development of .I ex. Bruce Englar encouraged the redesign which led to .I ex version 1. Bill Joy wrote versions 1 and 2.0 through 2.7, and created the framework that users see in the present editor. Mark Horton added macros and other features and made the editor work on a large number of terminals and Unix systems. vigor-0.016.orig/docs/USD.doc/exref/ex.summary0100644000076400007640000003710607103707244017574 0ustar cjw44cjw44.\" Copyright (c) 1980, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)ex.summary 8.3 (Berkeley) 8/18/96 .\" .ds p \v'-0.2'.\v'+0.2' .ds U \s-2UNIX\s+2 .ds c \v'-0.2':\v'+0.2' .nr LL 6.5i .lt 6.5i .ll 6.5i .ds CH .ds LF Computing Services, U.C. Berkeley .ds RF April 3, 1979 .de SP .sp 1v .. .nr PI 3n .nr PD 0 .ND .ps 12 .ft B .ce 1 Ex/Edit Command Summary (Version 2.0) .sp 1 .ft R .nr VS 11 .nr PS 9 .2C .PP .I Ex and .I edit are text editors, used for creating and modifying files of text on the \*U computer system. .I Edit is a variant of .I ex with features designed to make it less complicated to learn and use. In terms of command syntax and effect the editors are essentially identical, and this command summary applies to both. .PP The summary is meant as a quick reference for users already acquainted with .I edit or \fIex\fP. Fuller explanations of the editors are available in the documents .I Edit: A Tutorial .R (a self-teaching introduction) and the .I Ex Reference Manual .R (the comprehensive reference source for both \fIedit\fP and \fIex\fP). Both of these writeups are available in the Computing Services Library. .PP In the examples included with the summary, commands and text entered by the user are printed in \fBboldface\fR to distinguish them from responses printed by the computer. .sp 0.45v .LP .B The Editor Buffer .PP In order to perform its tasks the editor sets aside a temporary work space, called a \fIbuffer\fR, separate from the user's permanent file. Before starting to work on an existing file the editor makes a copy of it in the buffer, leaving the original untouched. All editing changes are made to the buffer copy, which must then be written back to the permanent file in order to update the old version. The buffer disappears at the end of the editing session. .sp 0.45v .LP .B Editing: Command and Text Input Modes .PP .R During an editing session there are two usual modes of operation: \fIcommand\fP mode and \fItext input\fP mode. (This disregards, for the moment, .I open and .I visual modes, discussed below.) In command mode, the editor issues a colon prompt (:) to show that it is ready to accept and execute a command. In text input mode, on the other hand, there is no prompt and the editor merely accepts text to be added to the buffer. Text input mode is initiated by the commands \fIappend\fP, \fIinsert\fP, and \fIchange\fP, and is terminated by typing a period as the first and only character on a line. .sp 0.45v .LP .B Line Numbers and Command Syntax .PP .R The editor keeps track of lines of text in the buffer by numbering them consecutively starting with 1 and renumbering as lines are added or deleted. At any given time the editor is positioned at one of these lines; this position is called the \fIcurrent line\fP. Generally, commands that change the contents of the buffer print the new current line at the end of their execution. .PP Most commands can be preceded by one or two line-number addresses which indicate the lines to be affected. If one number is given the command operates on that line only; if two, on an inclusive range of lines. Commands that can take line-number prefixes also assume default prefixes if none are given. The default assumed by each command is designed to make it convenient to use in many instances without any line-number prefix. For the most part, a command used without a prefix operates on the current line, though exceptions to this rule should be noted. The \fIprint\fP command by itself, for instance, causes one line, the current line, to be printed at the terminal. .PP The summary shows the number of line addresses that can be prefixed to each command as well as the defaults assumed if they are omitted. For example, .I (.,.) means that up to 2 line-numbers may be given, and that if none is given the command operates on the current line. (In the address prefix notation, ``.'' stands for the current line and ``$'' stands for the last line of the buffer.) If no such notation appears, no line-number prefix may be used. .PP Some commands take trailing information; only the more important instances of this are mentioned in the summary. .sp 0.25v .LP .B Open and Visual Modes .PP .R Besides command and text input modes, .I ex and .I edit provide on some CRT terminals other modes of editing, .I open and .I visual . In these modes the cursor can be moved to individual words or characters in a line. The commands then given are very different from the standard editor commands; most do not appear on the screen when typed. .I An Introduction to Display Editing with Vi .R provides a full discussion. .sp 0.25v .LP .B Special Characters .PP .R .fi Some characters take on special meanings when used in context searches and in patterns given to the \fIsubstitute\fP command. For \fIedit\fR, these are ``^'' and ``$'', meaning the beginning and end of a line, respectively. .I Ex has the following additional special characters: .B .ce 1 \&. & * [ ] ~ .R To use one of the special characters as its simple graphic representation rather than with its special meaning, precede it by a backslash (\\). The backslash always has a special meaning. .1C .TS cp10 cp10 cp10 cp10 ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). Name Abbr Description Examples .sp 1.75 (.)\fBappend a T{ Begins text input mode, adding lines to the buffer after the line specified. Appending continues until ``.'' is typed alone at the beginning of a new line, followed by a carriage return. \fI0a\fR places lines at the beginning of the buffer. T} T{ .nf \fR:\fBa Three lines of text are added to the buffer after the current line. \*p .R \*c .fi T} .SP \fR(.,.)\fBchange c T{ Deletes indicated line(s) and initiates text input mode to replace them with new text which follows. New text is terminated the same way as with \fIappend\fR. T} T{ .nf :\fB5,6c Lines 5 and 6 are deleted and replaced by these three lines. \*p .R \*c .fi T} .SP \fR(.,.)\fBcopy \fIaddr co T{ Places a copy of the specified lines after the line indicated by \fIaddr\fR. The example places a copy of lines 8 through 12, inclusive, after line 25. T} T{ .nf \fR:\fB8,12co 25 \fRLast line copied is printed \fR\*c .fi T} .SP \fR(.,.)\fBdelete d T{ Removes lines from the buffer and prints the current line after the deletion. T} T{ .nf \fR:\fB13,15d \fRNew current line is printed \*c .fi T} .TE .sp 0.5v .TS ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). T{ \fBedit \fIfile\fP .br \fBedit! \fIfile\fP T} T{ e .br e! T} T{ .fi \fRClears the editor buffer and then copies into it the named \fIfile\fR, which becomes the current file. This is a way of shifting to a different file without leaving the editor. The editor issues a warning message if this command is used before saving changes made to the file already in the buffer; using the form \fBe!\fR overrides this protective mechanism. T} T{ .nf \fR:\fBe ch10\fR No write since last change :\fBe! ch10\fR "ch10" 3 lines, 62 characters \*c .fi T} .SP \fBfile \fIname\fR f T{ \fRIf followed by a \fIname\fR, renames the current file to \fIname\fR. If used without \fIname\fR, prints the name of the current file. T} T{ .nf \fR:\fBf ch9 \fR"ch9" [Modified] 3 lines ... :\fBf \fR"ch9" [Modified] 3 lines ... \*c .fi T} .SP (1,$)\fBglobal g \fBglobal/\fIpattern\fB/\fIcommands T{ .nf :\fBg/nonsense/d \fR\*c .fi T} \fR(1,$)\fBglobal! g!\fR or \fBv T{ Searches the entire buffer (unless a smaller range is specified by line-number prefixes) and executes \fIcommands\fR on every line with an expression matching \fIpattern\fR. The second form, abbreviated either \fBg!\fR or \fBv\fR, executes \fIcommands\fR on lines that \fIdo not\fR contain the expression \fIpattern\fR. T} \^ .SP \fR(.)\fBinsert i T{ Inserts new lines of text immediately before the specified line. Differs from .I append only in that text is placed before, rather than after, the indicated line. In other words, \fB1i\fR has the same effect as \fB0a\fR. T} T{ .nf :\fB1i These lines of text will be added prior to line 1. \&. \fR: .fi T} .SP \fR(.,.+1)\fBjoin j T{ Join lines together, adjusting white space (spaces and tabs) as necessary. T} T{ .nf :\fB2,5j\fR Resulting line is printed : .fi T} .TE .bp .TS cp10 cp10 cp10 cp10 ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). Name Abbr Description Examples .sp 1.75 \fR(.,.)\fBlist l T{ \fRPrints lines in a more unambiguous way than the \fIprint\fR command does. The end of a line, for example, is marked with a ``$'', and tabs printed as ``^I''. T} T{ .nf :\fB9l \fRThis is line 9$ \*c .fi T} .TE .sp 0.5v .TS ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). \fR(.,.)\fBmove \fIaddr\fB m T{ \fRMoves the specified lines to a position after the line indicated by \fIaddr\fR. T} T{ .nf \fR:\fB12,15m 25\fR New current line is printed \*c .fi T} .SP \fR(.,.)\fBnumber nu T{ Prints each line preceded by its buffer line number. T} T{ .nf \fR:\fBnu \0\0\fR10\0 This is line 10 \*c .fi T} .SP \fR(.)\fBopen o T{ Too involved to discuss here, but if you enter open mode accidentally, press the \s-2ESC\s0 key followed by \fBq\fR to get back into normal editor command mode. \fIEdit\fP is designed to prevent accidental use of the open command. T} .SP \fBpreserve pre T{ Saves a copy of the current buffer contents as though the system had just crashed. This is for use in an emergency when a .I write command has failed and you don't know how else to save your work.\(dg T} T{ .nf :\fBpreserve\fR File preserved. : .fi T} .SP \fR(.,.)\fBprint p Prints the text of line(s). T{ .nf :\fB+2,+3p\fR The second and third lines after the current line : .fi T} .TE .FS .ll 6.5i \(dg You should seek assistance from a system administrator as soon as possible after saving a file with the .I preserve command, because the preserved copy of the file is saved in a directory used to store temporary files, and thus, the preserved copy may only be available for a short period of time. .FE .SP .nf .TS ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). T{ .nf \fBquit quit! .fi T} T{ .nf q q! T} T{ .fi \fREnds the editing session. You will receive a warning if you have changed the buffer since last writing its contents to the file. In this event you must either type \fBw\fR to write, or type \fBq!\fR to exit from the editor without saving your changes. T} T{ .nf \fR:\fBq \fRNo write since last change :\fBq! \fR% .fi T} .SP \fR(.)\fBread \fIfile\fP r T{ .fi \fRPlaces a copy of \fIfile\fR in the buffer after the specified line. Address 0 is permissible and causes the copy of \fIfile\fR to be placed at the beginning of the buffer. The \fIread\fP command does not erase any text already in the buffer. If no line number is specified, \fIfile\fR is placed after the current line. T} T{ .nf \fR:\fB0r newfile \fR"newfile" 5 lines, 86 characters \*c .fi T} .SP \fBrecover \fIfile\fP rec T{ .fi Retrieves a copy of the editor buffer after a system crash, editor crash, phone line disconnection, or \fIpreserve\fR command. T} .SP \fR(.,.)\fBsubstitute s T{ .nf \fBsubstitute/\fIpattern\fB/\fIreplacement\fB/ substitute/\fIpattern\fB/\fIreplacement\fB/gc .fi \fRReplaces the first occurrence of \fIpattern\fR on a line with \fIreplacement\fP. Including a \fBg\fR after the command changes all occurrences of \fIpattern\fP on the line. The \fBc\fR option allows the user to confirm each substitution before it is made; see the manual for details. T} T{ .nf :\fB3p \fRLine 3 contains a misstake :\fBs/misstake/mistake/ \fRLine 3 contains a mistake \*c .fi T} .TE .bp .TS cp10 cp10 cp10 cp10 ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). Name Abbr Description Examples .sp 1.75 \fBundo u T{ .fi \fRReverses the changes made in the buffer by the last buffer-editing command. Note that this example contains a notification about the number of lines affected. T} T{ .nf \fR:\fB1,15d \fR15 lines deleted new line number 1 is printed :\fBu \fR15 more lines in file ... old line number 1 is printed \*c .fi T} .SP \fR(1,$)\fBwrite \fIfile\fR w T{ .fi \fRCopies data from the buffer onto a permanent file. If no \fIfile\fR is named, the current filename is used. The file is automatically created if it does not yet exist. A response containing the number of lines and characters in the file indicates that the write has been completed successfully. The editor's built-in protections against overwriting existing files will in some circumstances inhibit a write. The form \fBw!\fR forces the write, confirming that an existing file is to be overwritten. T} T{ .nf \fR:\fBw \fR"file7" 64 lines, 1122 characters :\fBw file8 \fR"file8" File exists ... :\fBw! file8 \fR"file8" 64 lines, 1122 characters \*c .fi T} \fR(1,$)\fBwrite! \fIfile\fP w! \^ \^ .TE .sp 0.5v .TS ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). \fR(.)\fBz \fIcount\fP z T{ .fi \fRPrints a screen full of text starting with the line indicated; or, if \fIcount\fR is specified, prints that number of lines. Variants of the \fIz\fR command are described in the manual. T} .SP \fB!\fIcommand T{ .fi Executes the remainder of the line after \fB!\fR as a \*U command. The buffer is unchanged by this, and control is returned to the editor when the execution of \fIcommand\fR is complete. T} T{ .nf \fR:\fB!date \fRFri Jun 9 12:15:11 PDT 1978 ! \*c .fi T} .SP \fRcontrol-d T{ .fi Prints the next \fIscroll\fR of text, normally half of a screen. See the manual for details of the \fIscroll\fR option. T} .SP \fR(.+1) T{ .fi An address alone followed by a carriage return causes the line to be printed. A carriage return by itself prints the line following the current line. T} T{ .nf :\fR the line after the current line \*c .fi T} .TE .sp 0.5v .TS ltw(1.0i) lt2w(0.40i)fB ltw(3.0i) ltw(1.8i). \fB/\fIpattern\fB/ T{ .fi \fRSearches for the next line in which \fIpattern\fR occurs and prints it. T} T{ .nf \fR:\fB/This pattern/ \fRThis pattern next occurs here. \*c .fi T} .SP \fB// T{ Repeats the most recent search. T} T{ .nf \fR:\fB// \fRThis pattern also occurs here. \*c .fi T} .SP \fB?\fIpattern\fB? T{ Searches in the reverse direction for \fIpattern\fP. T} .SP \fB?? T{ Repeats the most recent search, moving in the reverse direction through the buffer. T} .TE vigor-0.016.orig/docs/internals/0040755000076400007640000000000007103707244015224 5ustar cjw44cjw44vigor-0.016.orig/docs/internals/cscope.NOTES0100644000076400007640000001022107103707244017303 0ustar cjw44cjw44Cscope Notes: The nvi tags structure has been reworked to handle the notion of multiple locations per tag. This supports cscope, which returns multiple locations per query. It will hopefully support ctags programs that create databases with multiple locations per tag as well. There is now a list of "tag queues" chained from each screen. Each tag queue has one or more "tag locations". +----+ +----+ +----+ +----+ | EP | -> | Q1 | <-- | T1 | <-- | T2 | +----+ +----+ --> +----+ --> +----+ | +----+ +----+ | Q2 | <-- | T1 | +----+ --> +----+ | +----+ +----+ | Q3 | <-- | T1 | +----+ --> +----+ In the above diagram, each "Q" is a "tag queue", and each "T" is a tag location. Generally, the commands: :tag create a new Q ^[ create a new Q :cscope find create a new Q :tagnext move to the next T :tagprev move to the previous T :tagpop discard one or more Q's ^T discard the most recent Q :tagtop discard all Q's More specifically: :cs[cope] a[dd] cscope-dir Attach to the cscope database in cscope-dir. :cs[cope] f[ind] c|d|e|f|g|i|s|t buffer|pattern Query all attached cscopes for the pattern. The pattern is a regular expression. If the pattern is a double-quote character followed by a valid buffer name (e.g., "t), then the contents of the named buffer are used as the pattern. c: find callers of name d: find all function calls made from name e: find pattern f: find files with name as substring g: find definition of name i: find files #including name s: find all uses of name t: find assignments to name The find command pushes the current location onto the tags stack, and switches to the first location resulting from the query, if the query returned at least one result. :cs[cope] h[elp] [command] List the cscope commands, or usage help on one command. :display c[onnections] Display the list of cscope connections :display t[ags] The tags display has been enhanced to display multiple tag locations per tag query. :cs[cope] k[ill] # Kill cscope connection number #. :cs[cope] r[eset] Kill all attached cscopes. Useful if one got hung but you don't know which one. :tagn[ext][!] Move to the next tag resulting from a query. :tagpr[ev][!] Return to the previous tag resulting from a query. :tagp[op], ^T Return to the previous tag group (no change). :tagt[op] Discard all tag groups (no change). Suggested maps: " ^N: move to the next tag map ^N :tagnext^M " ^P: move to the previous tag map ^P :tagprev^M " Tab+letter performs a C-Scope query on the current word. " C-Scope 12.9 has a text-string query (type t). " C-Scope 13.3 replaces it with an assignment query; hence a==t. map a "tye:csc find t"t map c "tye:csc find c"t map d "tye:csc find d"t map e "tye:csc find e"t map f "tye:csc find f"t map g "tye:csc find g"t map i "tye:csc find i"t map s "tye:csc find s"t map t "tye:csc find t"t To start nvi with an initial set of cscope directories, use the environment variable CSCOPE_DIRS. This variable should contain a -separated list of directories containing cscope databases. (This MAY be changed to be an edit option, I haven't really decided, yet.) Each cscope directory must contain a file named "cscope.out" which is the main cscope database, or nvi will not attempt to connect to a cscope to handle requests for that database. The file "cscope.tpath" may contain a colon-separated directory search path which will be used to find the files reported by cscope. If this cscope.tpath does not exist, then the paths are assumed to be relative to the cscope directory itself. This is an extension to the standard cscope, but seems important enough to keep. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Cscope Availability: UNIXWare System V Release 4.0 variants such as Sun Solaris 2.x (/opt/SUNWspro/bin) have version 11.5, and UNIXWare System V Release 4.1 has version 12.10 with an option for much faster searching. You can buy version 13.3 source with an unrestricted license for $400 from AT&T Software Solutions by calling +1-800-462-8146. vigor-0.016.orig/docs/internals/structures0100644000076400007640000000567207103707244017401 0ustar cjw44cjw44# @(#)structures 5.4 (Berkeley) 10/4/95 There are three major data structures in this package, plus a single data structure per screen type. The first is a single global structure (GS) which contains information common to all files and screens. It hold global things like the input key queues, and functions as a single place to hang things. For example, interrupt routines have to be able to find screen structures, and they can only do this if they have a starting point. The number of globals in nvi is dependent on the screen type, but every screen type will have at least one global, __global_list, which references the GS structure. The GS structure contains linked lists of screen (SCR) structures. Each SCR structure normally references a file (EXF) structure. The GS structure has a set of functions which update the screen and/or return information about the screen from the underlying screen package. The GS structure never goes away. The SCR structure persists over instances of screens, and the EXF structure persists over references to files. File names have different properties than files themselves, so the name information for a file is held in an FREF structure which is chained from the SCR structure. In general, functions are always passed an SCR structure, which usually references an underlying EXF structure. The SCR structure is necessary for any routine that wishes to talk to the screen, the EXF structure is necessary for any routine that wants to modify the file. The relationship between an SCR structure and its underlying EXF structure is not fixed, and various ex commands will substitute a new EXF in place of the current one, and there's no way to detect this. The naming of the structures is consistent across the program. (Macros even depend on it, so don't try and change it!) The global structure is "gp", the screen structure is "sp", and the file structure is "ep". A few other data structures: TEXT In nvi/cut.h. This structure describes a portion of a line, and is used by the input routines and as the "line" part of a cut buffer. CB In nvi/cut.h. A cut buffer. A cut buffer is a place to hang a list of TEXT structures. CL The curses screen private data structure. Everything to do standalone curses screens. MARK In nvi/mark.h. A cursor position, consisting of a line number and a column number. MSG In nvi/msg.h. A chain of messages for the user. SEQ In nvi/seq.h. An abbreviation or a map entry. TK The Tcl/Tk screen private data structure. Everything to do standalone Tcl/Tk screens. EXCMD In nvi/ex/ex.h. The structure that gets passed around to the functions that implement the ex commands. (The main ex command loop (see nvi/ex/ex.c) builds this up and then passes it to the ex functions.) VICMD In nvi/vi/vi.h. The structure that gets passed around to the functions that implement the vi commands. (The main vi command loop (see nvi/vi/vi.c) builds this up and then passes it to the vi functions.) vigor-0.016.orig/docs/internals/autowrite0100644000076400007640000000523707103707244017176 0ustar cjw44cjw44# @(#)autowrite 8.3 (Berkeley) 2/17/95 Vi autowrite behavior, the fields with *'s are "don't cares". =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Commands that are affected only by autowrite: Command File Autowrite? Action: modified? ----------------------------------------------- ^Z Y Y Write file and suspend. ^Z Y N Suspend. ^Z N * Suspend. # This behavior is NOT identical to :edit. ^^ Y Y Write file and jump. ^^ Y N Error. ^^ N * Jump. # The new nvi command ^T (:tagpop) behaves identically to ^]. # This behavior is identical to :tag, :tagpop, and :tagpush with # force always set to N. ^] Y Y Write file and jump. ^] Y N Error. ^] N * Jump. # There's no way to specify a force flag to the '!' command. :! Y Y Write file and execute. :! Y N Warn (if warn option) and execute. :! N * Execute. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Commands that are affected by both autowrite and force: NOTE: the "force" flag is never passed on, i.e. the write to the file caused by the autowrite flag is never forced. Command File Autowrite? Force? Action: modified? (!) ------------------------------------------------------- # The first rule (YYY) is historic practice, but seems wrong. # In nvi, :next and :prev commands behave identically to :rewind. :next Y Y Y Write changes and jump. :next Y Y N Write changes and jump. :next Y N Y Abandon changes and jump. :next Y N N Error. :next N * * Jump. :rewind Y Y Y Abandon changes and jump. :rewind Y Y N Write changes and jump. :rewind Y N Y Abandon changes and jump. :rewind Y N N Error. :rewind N * * Jump. # The new nvi commands, :tagpop and :tagtop, behave identically to :tag. # Note, this behavior is the same as :rewind and friends, as well. :tag Y Y Y Abandon changes and jump. :tag Y Y N Write changes and jump. :tag Y N Y Abandon changes and jump. :tag Y N N Error. :tag N * * Jump. # The command :suspend behaves identically to :stop. :stop Y Y Y Suspend. :stop Y Y N Write changes and suspend. :stop Y N Y Suspend. :stop Y N N Suspend. :stop N * * Suspend. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Commands that might be affected by autowrite, but aren't: Command File Autowrite? Force? Action: modified? (!) ------------------------------------------------------- #:ex, and :vi (executed while in vi mode) behave identically to :edit. :edit Y * Y Abandon changes and jump. :edit Y * N Error. :edit N * * Jump. :quit Y * Y Quit. :quit Y * N Error. :quit N * * Quit. :shell * * * Execute shell. :xit Y * * Write changes and exit. :xit N * * Exit. vigor-0.016.orig/docs/internals/quoting0100644000076400007640000001575407103707244016646 0ustar cjw44cjw44# @(#)quoting 5.5 (Berkeley) 11/12/94 QUOTING IN EX/VI: There are four escape characters in historic ex/vi: \ (backslashes) ^V ^Q (assuming it wasn't used for IXON/IXOFF) The terminal literal next character. Vi did not use the lnext character, it always used ^V (or ^Q). ^V and ^Q were equivalent in all cases for vi. There are four different areas in ex/vi where escaping characters is interesting: 1: In vi text input mode. 2: In vi command mode. 3: In ex command and text input modes. 4: In the ex commands themselves. 1: Vi text input mode (a, i, o, :colon commands, etc.): The set of characters that users might want to escape are as follows. As ^L and ^Z were not special in input mode, they are not listed. carriage return (^M) escape (^[) autoindents (^D, 0, ^, ^T) erase (^H) word erase (^W) line erase (^U) newline (^J) (not historic practice) Historic practice was that ^V was the only way to escape any of these characters, and that whatever character followed the ^V was taken literally, e.g. ^V^V is a single ^V. I don't see any strong reason to make it possible to escape ^J, so I'm going to leave that alone. One comment regarding the autoindent characters. In historic vi, if you entered "^V0^D" autoindent erasure was still triggered, although it wasn't if you entered "0^V^D". In nvi, if you escape either character, autoindent erasure is not triggered. Abbreviations were not performed if the non-word character that triggered the abbreviation was escaped by a ^V. Input maps were not triggered if any part of the map was escaped by a ^V. The historic vi implementation for the 'r' command requires two leading ^V's to replace a character with a literal character. This is obviously a bug, and should be fixed. 2: Vi command mode Command maps were not triggered if the second or later character of a map was escaped by a ^V. The obvious extension is that ^V should keep the next command character from being mapped, so you can do ":map x xxx" and then enter ^Vx to delete a single character. 3: Ex command and text input modes. As ex ran in canonical mode, there was little work that it needed to do for quoting. The notable differences between ex and vi are that it was possible to escape a in the ex command and text input modes, and ex used the "literal next" character, not control-V/control-Q. 4: The ex commands: Ex commands are delimited by '|' or newline characters. Within the commands, whitespace characters delimit the arguments. Backslash will generally escape any following character. In the abbreviate, unabbreviate, map and unmap commands, control-V escapes the next character, instead. This is historic behavior in vi, although there are special cases where it's impossible to escape a character, generally a whitespace character. Escaping characters in file names in ex commands: :cd [directory] (directory) :chdir [directory] (directory) :edit [+cmd] [file] (file) :ex [+cmd] [file] (file) :file [file] (file) :next [file ...] (file ...) :read [!cmd | file] (file) :source [file] (file) :write [!cmd | file] (file) :wq [file] (file) :xit [file] (file) Since file names are also subject to word expansion, the underlying shell had better be doing the correct backslash escaping. This is NOT historic behavior in vi, making it impossible to insert a whitespace, newline or carriage return character into a file name. 4: Escaping characters in non-file arguments in ex commands: :abbreviate word string (word, string) * :edit [+cmd] [file] (+cmd) * :ex [+cmd] [file] (+cmd) :map word string (word, string) * :set [option ...] (option) * :tag string (string) :unabbreviate word (word) :unmap word (word) These commands use whitespace to delimit their arguments, and use ^V to escape those characters. The exceptions are starred in the above list, and are discussed below. In general, I intend to treat a ^V in any argument, followed by any character, as that literal character. This will permit editing of files name "foo|", for example, by using the string "foo\^V|", where the literal next character protects the pipe from the ex command parser and the backslash protects it from the shell expansion. This is backward compatible with historical vi, although there were a number of special cases where vi wasn't consistent. 4.1: The edit/ex commands: The edit/ex commands are a special case because | symbols may occur in the "+cmd" field, for example: :edit +10|s/abc/ABC/ file.c In addition, the edit and ex commands have historically ignored literal next characters in the +cmd string, so that the following command won't work. :edit +10|s/X/^V / file.c I intend to handle the literal next character in edit/ex consistently with how it is handled in other commands. More fun facts to know and tell: The acid test for the ex/edit commands: date > file1; date > file2 vi :edit +1|s/./XXX/|w file1| e file2|1 | s/./XXX/|wq No version of vi, of which I'm aware, handles it. 4.2: The set command: The set command treats ^V's as literal characters, so the following command won't work. Backslashes do work in this case, though, so the second version of the command does work. set tags=tags_file1^V tags_file2 set tags=tags_file1\ tags_file2 I intend to continue permitting backslashes in set commands, but to also permit literal next characters to work as well. This is backward compatible, but will also make set consistent with the other commands. I think it's unlikely to break any historic .exrc's, given that there are probably very few files with ^V's in their name. 4.3: The tag command: The tag command ignores ^V's and backslashes; there's no way to get a space into a tag name. I think this is a don't care, and I don't intend to fix it. 5: Regular expressions: :global /pattern/ command :substitute /pattern/replace/ :vglobal /pattern/ command I intend to treat a backslash in the pattern, followed by the delimiter character or a backslash, as that literal character. This is historic behavior in vi. It would get rid of a fairly hard-to-explain special case if we could just use the character immediately following the backslash in all cases, or, if we changed nvi to permit using the literal next character as a pattern escape character, but that would probably break historic scripts. There is an additional escaping issue for regular expressions. Within the pattern and replacement, the '|' character did not delimit ex commands. For example, the following is legal. :substitute /|/PIPE/|s/P/XXX/ This is a special case that I will support. 6: Ending anything with an escape character: In all of the above rules, an escape character (either ^V or a backslash) at the end of an argument or file name is not handled specially, but used as a literal character. vigor-0.016.orig/docs/internals/input0100644000076400007640000002217707103707244016314 0ustar cjw44cjw44# @(#)input 5.5 (Berkeley) 7/2/94 MAPS, EXECUTABLE BUFFERS AND INPUT IN EX/VI: The basic rule is that input in ex/vi is a stack. Every time a key which gets expanded is encountered, it is expanded and the expansion is treated as if it were input from the user. So, maps and executable buffers are simply pushed onto the stack from which keys are returned. The exception is that if the "remap" option is turned off, only a single map expansion is done. I intend to be fully backward compatible with this. Historically, if the mode of the editor changed (ex to vi or vice versa), any queued input was silently discarded. I don't see any reason to either support or not support this semantic. I intend to retain the queued input, mostly because it's simpler than throwing it away. Historically, neither the initial command on the command line (the + flag) or the +cmd associated with the ex and edit commands was subject to mapping. Also, while the +cmd appears to be subject to "@buffer" expansion, once expanded it doesn't appear to work correctly. I don't see any reason to either support or not support these semantics, so, for consistency, I intend to pass both the initial command and the command associated with ex and edit commands through the standard mapping and @ buffer expansion. One other difference between the historic ex/vi and nex/nvi is that nex displays the executed buffers as it executes them. This means that if the file is: set term=xterm set term=yterm set term=yterm the user will see the following during a typical edit session: nex testfile testfile: unmodified: line 3 :1,$yank a :@a :set term=zterm :set term=yterm :set term=xterm :q! This seems like a feature and unlikely to break anything, so I don't intend to match historic practice in this area. The rest of this document is a set of conclusions as to how I believe the historic maps and @ buffers work. The summary is as follows: 1: For buffers that are cut in "line mode", or buffers that are not cut in line mode but which contain portions of more than a single line, a trailing character appears in the input for each line in the buffer when it is executed. For buffers not cut in line mode and which contain portions of only a single line, no additional characters appear in the input. 2: Executable buffers that execute other buffers don't load their contents until they execute them. 3: Maps and executable buffers are copied when they are executed -- they can be modified by the command but that does not change their actions. 4: Historically, executable buffers are discarded if the editor switches between ex and vi modes. 5: Executable buffers inside of map commands are expanded normally. Maps inside of executable buffers are expanded normally. 6: If an error is encountered while executing a mapped command or buffer, the rest of the mapped command/buffer is discarded. No user input characters are discarded. 7: Characters in executable buffers are remapped. 8: Characters in executable buffers are not quoted. Individual test cases follow. Note, in the test cases, control characters are not literal and will have to be replaced to make the test cases work. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 1: For buffers that are cut in "line mode", or buffers that are not cut in line mode but which contain portions of more than a single line, a trailing character appears in the input for each line in the buffer when it is executed. For buffers not cut in line mode and which contain portions of only a single line, no additional characters appear in the input. === test file === 3Gw w line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz === end test file === If the first line is loaded into 'a' and executed: 1G"ayy@a The cursor ends up on the '2', a result of pushing "3Gw^J" onto the stack. If the first two lines are loaded into 'a' and executed: 1G2"ayy@a The cursor ends up on the 'f' in "foo" in the fifth line of the file, a result of pushing "3Gw^Jw^J" onto the stack. If the first line is loaded into 'a', but not using line mode, and executed: 1G"ay$@a The cursor ends up on the '1', a result of pushing "3Gw" onto the stack If the first two lines are loaded into 'a', but not using line mode, and executed: 1G2"ay$@a The cursor ends up on the 'f' in "foo" in the fifth line of the file, a result of pushing "3Gw^Jw^J" onto the stack. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 2: Executable buffers that execute other buffers don't load their contents until they execute them. === test file === cwLOAD B^[ line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz @a@b "byy === end test file === The command is loaded into 'e', and then executed. 'e' executes 'a', which loads 'b', then 'e' executes 'b'. 5G"eyy6G"ayy1G@e The output should be: === output file === cwLOAD B^[ LOAD B 1 foo bar baz line 2 foo bar baz line 3 foo bar baz @a@b "byy === end output file === =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 3: Maps and executable buffers are copied when they are executed -- they can be modified by the command but that does not change their actions. Executable buffers: === test file === line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz @a@b "eyy cwEXECUTE B^[ === end test file === 4G"eyy5G"ayy6G"byy1G@eG"ep The command is loaded into 'e', and then executed. 'e' executes 'a', which loads 'e', then 'e' executes 'b' anyway. The output should be: === output file === line 1 foo bar baz EXECUTE B 2 foo bar baz line 3 foo bar baz @a@b "eyy cwEXECUTE B^[ line 1 foo bar baz === end output file === Maps: === test file === Cine 1 foo bar baz line 2 foo bar baz line 3 foo bar baz === end test file === Entering the command ':map = :map = rB^V^MrA^M1G==' shows that the first time the '=' is entered the '=' map is set and the character is changed to 'A', the second time the character is changed to 'B'. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 4: Historically, executable buffers are discarded if the editor switches between ex and vi modes. === test file === line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz cwCHANGE^[Q:set set|visual|1Gwww === end test file === vi testfile 4G"ayy@a ex testfile $p yank a @a In vi, the command is loaded into 'a' and then executed. The command subsequent to the 'Q' is (historically, silently) discarded. In ex, the command is loaded into 'a' and then executed. The command subsequent to the 'visual' is (historically, silently) discarded. The first set command is output by ex, although refreshing the screen usually causes it not to be seen. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 5: Executable buffers inside of map commands are expanded normally. Maps inside of executable buffers are expanded normally. Buffers inside of map commands: === test file === line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz cwREPLACE BY A^[ === end test file === 4G"ay$:map x @a 1Gx The output should be: === output file === REPLACE BY A 1 foo bar baz line 2 foo bar baz line 3 foo bar baz cwREPLACE BY A^[ === end output file === Maps commands inside of executable buffers: === test file === line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz X === end test file === :map X cwREPLACE BY XMAP^[ 4G"ay$1G@a The output should be: === output file === REPLACE BY XMAP 1 foo bar baz line 2 foo bar baz line 3 foo bar baz X === end output file === Here's a test that does both, repeatedly. === test file === line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz X Y cwREPLACED BY C^[ blank line === end test file === :map x @a 4G"ay$ :map X @b 5G"by$ :map Y @c 6G"cy$ 1Gx The output should be: === output file === REPLACED BY C 1 foo bar baz line 2 foo bar baz line 3 foo bar baz X Y cwREPLACED BY C^[ blank line === end output file === =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 6: If an error is encountered while executing a mapped command or a buffer, the rest of the mapped command/buffer is discarded. No user input characters are discarded. === test file === line 1 foo bar baz line 2 foo bar baz line 3 foo bar baz :map = 10GcwREPLACMENT^V^[^[ === end test file === The above mapping fails, however, if the 10G is changed to 1, 2, or 3G, it will succeed. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 7: Characters in executable buffers are remapped. === test file === abcdefghijklmnnop ggg === end test file === :map g x 2G"ay$1G@a The output should be: === output file === defghijklmnnop ggg === end output file === =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 8: Characters in executable buffers are not quoted. === test file === iFOO^[ === end test file === 1G"ay$2G@a The output should be: === output file === iFOO^[ FOO === end output file === =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= vigor-0.016.orig/docs/internals/context0100644000076400007640000000157707103707244016642 0ustar cjw44cjw44# @(#)context 8.6 (Berkeley) 10/14/94 In historic vi, the previous context mark was always set: ex address: any number, , , , , ex commands: undo, "z.", global, v vi commands: (, ), {, }, %, [[, ]], ^] nvi adds the vi command ^T to this list. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= In historic vi, the previous context mark was set if the line changed: vi commands: ', G, H, L, M, z =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= In historic vi, the previous context mark was set if the line or column changed: vi commands: `, /, ?, N, n nvi adds the vi command ^A to this list. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= In historic vi, the previous context mark was set in non-visual mode for ^R and ^L if the line changed, but I have yet to figure out how the line could change. vigor-0.016.orig/docs/internals/openmode0100644000076400007640000000175607103707244016763 0ustar cjw44cjw44 @(#)openmode 8.1 (Berkeley) 10/29/94 Open mode has the following special behaviors: z, ^F, ^B: If count is not specified, it shall default to the window edit option - 2. Write lines from the edit buffer starting at: (the current line) - ((count - 2) / 2) until: (((count + 1) / 2) * 2) - 1 lines, or the last line in the edit buffer has been written. A line consisting of the smaller of the number of columns in the display divided by two or 40 ``-'' characters shall be written immediately before and after the specified is written. These two lines shall count against the total number of lines to be written. A blank line shall be written after the last line is written. z, ^F and ^B all behave identically. ^D: Display the next scroll value lines, change the current line. ^U: Change the current line, do nothing else. ^E, ^Y: Do nothing. ^L: Clear the screen and redisplay the current line. H, L, M: Move to the first nonblank of the current line and do nothing else. vigor-0.016.orig/docs/internals/gdb.script0100644000076400007640000000355107103707244017207 0ustar cjw44cjw44# @(#)gdb.script 8.5 (Berkeley) 5/4/96 # display the VI screen map # usage dmap(sp) define dmap set $h = ((VI_PRIVATE *)$arg0->vi_private)->h_smap set $t = ((VI_PRIVATE *)$arg0->vi_private)->t_smap while ($h <= $t) printf "lno: %2d; soff %d coff %d ", \ (int)$h->lno, (int)$h->soff, (int)$h->coff if ($h->c_ecsize == 0) printf "flushed\n" else printf "\n\tsboff %d; scoff %d\n", \ (int)$h->c_sboff, (int)$h->c_scoff printf "\teboff %d; eclen %d; ecsize %d\n", \ (int)$h->c_eboff, (int)$h->c_eclen, \ (int)$h->c_ecsize end set $h = $h + 1 end end # display the tail of the VI screen map define tmap set $h = ((VI_PRIVATE *)$arg0->vi_private)->h_smap set $t = ((VI_PRIVATE *)$arg0->vi_private)->t_smap while ($t >= $h) printf "lno: %2d; soff %d coff %d ", \ (int)$t->lno, (int)$t->soff, (int)$t->coff if ($t->c_ecsize == 0) printf "flushed\n" else printf "\n\tsboff %d; scoff %d\n", \ (int)$t->c_sboff, (int)$t->c_scoff printf "\teboff %d; eclen %d; ecsize %d\n", \ (int)$t->c_eboff, (int)$t->c_eclen, \ (int)$t->c_ecsize end set $t = $t - 1 end end # display the private structures define clp print *((CL_PRIVATE *)sp->gp->cl_private) end define vip print *((VI_PRIVATE *)sp->vi_private) end define exp print *((EX_PRIVATE *)sp->ex_private) end # display the marks define markp set $h = sp->ep->marks.next set $t = &sp->ep->marks while ($h != 0 && $h != $t) printf "key %c lno: %d cno: %d flags: %x\n", \ ((MARK *)$h)->name, ((MARK *)$h)->lno, \ ((MARK *)$h)->cno, ((MARK *)$h)->flags set $h = ((MARK *)$h)->next end end # display the tags define tagp set $h = sp->taghdr.next set $t = &sp->taghdr while ($h != 0 && $h != $t) printf "tag: %s lno %d cno %d\n", ((TAG *)$h)->frp->fname, \ ((TAG *)$h)->lno, ((TAG *)$h)->cno set $h= ((TAG *)$h)->next end end vigor-0.016.orig/docs/tutorial/0040755000076400007640000000000007103707245015071 5ustar cjw44cjw44vigor-0.016.orig/docs/tutorial/vi.advanced0100644000076400007640000021252507103707244017201 0ustar cjw44cjw44Section 26: Index to the rest of the tutorial The remainder of the tutorial can be perused at your leisure. Simply find the topic of interest in the following list, and {/Section xx:/^M} to get to the appropriate section. (Remember that ^M means the return key) The material in the following sections is not necessarily in a bottom up order. It should be fairly obvious that if a section mentions something with which you are not familiar, say, buffers, you might {/buffer/^M} followed by several {n} to do a keyword search of the file for more details on that item. Another point to remember is that commands are surrounded by curly-braces and can therefore be found rather easily. To see where, say, the X command is used try {/{X}/^M}. Subsequent {n} will show you other places the command was used. We have tried to maintain the convention of placing the command letter surrounded by curly-braces on the section line where that command is mentioned. Finally, you should have enough 'savvy' at this point to be able to do your own experimentation with commands without too much hand-holding on the part of the tutorial. Experimentation is the best way to learn the effects of the commands. Section Topic - description ------- ------------------- (Sections 1 through 25 are located in the file vi.beginner.) 1 introduction: {^F} {ZZ} 2 introduction (con't) and positioning: {^F} {^B} 3 introduction (con't) and positioning: {^F} {^B} 4 positioning: {^F} {^B} ^M (return key) 5 quitting: {:q!} ^M key 6 marking, cursor and screen positioning: {m} {G} {'} {z} 7 marking, cursor and screen positioning: {m} {G} {'} {z} 8 marking, cursor and screen positioning: {z} {m} {'} 9 marking and positioning: {m} {''} 10 line positioning: {^M} {-} 11 scrolling with {^M} 12 scrolling with {-} and screen adjustment {z} 13 notes on use of tutorial 14 other scrolling and postioning commands: {^E} {^Y} {^D} {^U} 15 searching: {/ .. /^M} 16 searching: {? .. ?^M} {n} (in search strings ^ $) 17 searching: \ and magic-characters in search strings 18 colon commands, exiting: {:} {ZZ} 19 screen positioning: {H} {M} {L} 20 character positioning: {w} {b} {0} {W} {B} {e} {E} {'} {`} 21 cursor positioning: {l} {k} {j} {h} 22 adding text: {i} {a} {I} {A} {o} {O} ^[ (escape key) 23 character manipulation: {f} {x} {X} {w} {l} {r} {R} {s} {S} {J} 24 undo: {u} {U} 25 review (The following sections are in this file.) 26 Index to the rest of the tutorial ******** YOU ARE HERE ******* 27 discussion of repeat counts and the repeat command: {.} 28 more on low-level character motions: {t} {T} {|} 29 advanced correction operators: {d} {c} 30 updating the screen: {^R} 31 text buffers: {"} 32 rearranging and duplicating text: {p} {P} {y} {Y} 33 recovering lost lines 34 advanced file manipulation with vi 34.1 more than one file at a time: {:n} 34.2 reading files and command output: {:r} 34.3 invoking vi from within vi: {:e} {:vi} 34.4 escaping to a shell: {:sh} {:!} 34.5 writing parts of a file: {:w} 34.6 filtering portions of text: {!} 35 advanced searching: magic patterns 36 advanced substitution: {:s} 37 advanced line addressing: {:p} {:g} {:v} 38 higher level text objects and nroff: ( ) { } [[ ]] 39 more about inserting text 40 more on operators: {d} {c} {<} {>} {!} {=} {y} 41 abbreviations: {:ab} 42 vi's relationship with the ex editor: {:} 43 vi on hardcopy terminals and dumb terminals: open mode 44 options: {:set} {setenv EXINIT} 44.1 autoindent 44.2 autoprint 44.3 autowrite 44.4 beautify 44.5 directory 44.6 edcompatible 44.7 errorbells 44.8 hardtabs 44.9 ignorecase 44.10 lisp 44.11 list 44.12 magic 44.13 mesg 44.14 number 44.15 open 44.16 optimize 44.17 paragraphs 44.18 prompt 44.19 readonly 44.20 redraw 44.21 remap 44.22 report 44.23 scroll 44.24 sections 44.25 shell 44.26 shiftwidth 44.27 showmatch 44.28 slowopen 44.29 tabstop 44.30 tags 44.31 taglength 44.32 term 44.33 terse 44.34 timeout 44.35 ttytype 44.36 warn 44.37 window 44.38 wrapscan 44.39 wrapmargin 44.40 writeany 44.41 w300, w1200, w9600 Section 27: repetition counts and the repeat command {.} Most vi commands will use a preceding count to affect their behavior in some way. We have already seen how {3x} deletes three characters, and {22G} moves us to line 22 of the file. For almost all of the commands, one can survive by thinking of these leading numbers as a 'repeat count' specifying that the command is to be repeated so many number of times. Other commands use the repeat count slightly differently, like the {G} command which use it as a line number. For example: {3^D} means scroll down in the file three lines. Subsequent {^D} OR {^U} will scroll only three lines in their respective directions! {3z^M} says put line three of the file at the top of the screen, while {3z.} says put line three as close to the middle of the screen as possible. {50|} moves the cursor to column fifty in the current line. {3^F} says move forward 3 screenfulls. This is a repetition count. The documents advertise that {3^B} should move BACK three screenfulls, but I can't get it to work. Position the cursor on some text and try {3r.}. This replaces three characters with '...'. However, {3s.....^[} is the same as {3xi.....^[}. Try {10a+----^[}. A very useful instance of a repetition count is one given to the '.' command, which repeats the last 'change' command. If you {dw} and then {3.}, you will delete first one and then three words. You can then delete two more words with {2.}. If you {3dw}, you will delete three words. A subsequent {.} will delete three more words. But a subsequent {2.} will delete only two words, not three times two words. Caveat: The author has noticed that any repetition count with {^B} will NOT work: indeed, if you are at the end of your file and try {3^B} sufficiently often, the editor will hang you in an infinite loop. Please don't try it: take my word for it. Section 28: {t} {T} {|} Position the cursor on line 13 below: Line 13: Four score and seven years ago, our forefathers brought ... Note that {fv} moves the cursor on/over the 'v' in 'seven'. Do a {0} to return to the beginning of the line and try a {tv}. The cursor is now on/over the first 'e' in 'seven'. The {f} command finds the next occurrence of the specified letter and moves the cursor to it. The {t} command finds the specified letter and moves the cursor to the character immediately preceding it. {T} searches backwards, as does {F}. Now try {60|}: the cursor is now on the 'o' in 'brought', which is the sixtieth character on the line. Section 29: {d} {c} Due to their complexity we have delayed discussion of two of the most powerful operators in vi until now. Effective use of these operators requires more explanation than was deemed appropriate for the first half of the tutorial. {d} and {c} are called operators instead of commands because they consist of three parts: a count specification or a buffer specification (see section #BUFFERS), the {d} or {c}, and the object or range description. We will not discuss buffers at this stage, but will limit ourselves to count specifications. Examples speak louder than words: position the cursor at the beginning of line 14: Line 14: Euclid alone has looked on beauty bear. Obviously, there is something wrong with this quotation. Type {2fb} to position the cursor on the 'b' of 'bear'. Now, type {cwbare^[} and observe the results. The {cw} specifies that the change command {c} is to operate on a word object. More accurately, it specifies that the range of the change command includes the next word. Position the cursor on the period in Line 14. (one way is to use {f.}) Now, type {cbbeast^[}. This specifies the range of the change command to be the previous word (the 'b' reminiscent of the {b} command). If we had wished to delete the word rather than change it, we would have used the {d} operator, rather than the {c} operator. Position the cursor at the beginning of the line with {0}. Type {d/look/^M}. The search string specified the range of the delete. Everything UP TO the word 'looking' was deleted from the line. In general, almost any command that would move the cursor will specify a range for these commands. The most confusing exception to this rule is when {dd} or {cc} is entered: they refer to the whole line. Following is a summary of the suffixes (suffices? suffici?) and the ranges they specify: suffix will delete{d}/change{c} ------ ------------------------ ^[ cancels the command w the word to the right of the cursor W ditto, but ignoring punctuation b the word to the left of the cursor B ditto, but ignoring punctuation e see below. E ditto (space) a character $ to the end of the line ^ to the beginning of the line / .. / up to, but not including, the string ? .. ? back to and including the string fc up to and including the occurrence of c Fc back to and including the occurrence of c tc up to but not including the occurrence of c Tc back to but not including the occurrence of c ^M TWO lines (that's right: two) (number)^M that many lines plus one (number)G up to and including line (number) ( the previous sentence if you are at the beginning of the current sentence, or the current sentence up to where you are if you are not at the beginning of the current sentence. Here, 'sentence' refers to the intuitive notion of an English sentence, ending with '!', '?', or '.' and followed by an end of line or two spaces. ) the rest of the current sentence { analogous to '(', but in reference to paragraphs: sections of text surrounded by blank lines } analogous to ')', but in reference to paragraphs [[ analogous to '(', but in reference to sections ]] analogous to ')', but in reference to sections H the first line on the screen M the middle line on the screen L the last line on the screen 3L through the third line from the bottom of the screen ^F forward a screenful ^B backward a screenful : : etc. etc. etc. This list is not exhaustive, but it should be sufficient to get the idea across: after the {c} or {d} operator, you can specify a range with another move-the-cursor command, and that is the region of text over which the command will be effective. Section 30: updating the screen {^R} Vi tries to be very intelligent about the type of terminal you are working on and tries to use the in-terminal computing power (if any) of your terminal. Also if the terminal is running at a low baud rate (say 1200 or below), vi sets various parameters to make things easier for you. For example, if you were running on a 300 baud terminal (that's 30 characters per second transmission rate) not all 24 lines of the screen would be used by vi. In addition, there is a large portion of the editor keeping track of what your screen currently looks like, and what it would look like after a command has been executed. Vi then compares the two, and updates only those portions of the screen that have changed. Furthermore, some of you may have noticed (it depends on your terminal) that deleting lines or changing large portions of text may leave some lines on the screen looking like: @ meaning that this line of the screen does not correspond to any line in your file. It would cost more to update the line than to leave it blank for the moment. If you would like to see your screen fully up-to-date with the contents of your file, type {^R}. To see it in action, delete several lines with {5dd}, type {^R}, and then type {u} to get the lines back. Here is as good a place as any to mention that if the editor is displaying the end of your file, there may be lines on the screen that look like: ~ indicating that that screen line would not be affected by {^R}. These lines simply indicate the end of the file. Section 31: text buffers {"} Vi gives you the ability to store text away in "buffers". This feature is very convenient for moving text around in your file. There are a total of thirty- five buffers available in vi. There is the "unnamed" buffer that is used by all commands that delete text, including the change operator {c}, the substitute and replace commands {s} and {r}, as well as the delete operator {d} and delete commands {x} and {X}. This buffer is filled each time any of these commands are used. However, the undo command {u} has no effect on the unnamed buffer. There are twenty-six buffers named 'a' through 'z' which are available for the user. If the name of the buffer is capitalized, then the buffer is not overwritten but appended to. For example, the command {"qdd} will delete one line and store that line in the 'q' buffer, destroying the previous contents of the buffer. However, {"Qdd} will delete one line of text and append that line to the current contents of the 'q' buffer. Finally, there are nine buffers named '1' through '9' in which the last nine deletes are stored. Buffer 1 is the default buffer for the modify commands and is sometimes called the unnamed buffer. To reference a specific buffer, use the double-quote command {"} followed by the name of the buffer. The next two sections show how buffers can be used to advantage. Section 32: rearranging and duplicating text: {y} {Y} {p} {P} Position yourself on line 15 below and {z^M}: Line 15: A tree as lovely as a poem ... Line 16: I think that I shall never see Type {dd}. Line 15 has disappeared and been replaced with the empty line (one with the single character @ on it) or (again depending on your terminal) Line 16 has moved up and taken its place. We could recover Line 15 with an undo {u} but that would simply return it to its original location. Obviously, the two lines are reversed, so we want to put line 15 AFTER line 16. This is simply done with the put command {p}, which you should type now. What has happened is that {dd} put Line 15 into the unnamed buffer, and the {p} command retrieved the line from the unnamed buffer. Now type {u} and observe that Line 15 disappears again (the put was undone without affecting the unnamed buffer). Type {P} and see that the capital {P} puts the line BEFORE the cursor. To get Line 15 where it belongs again type {dd}{p}. Also in Line 15 note that the words 'tree' and 'poem' are reversed. Using the unnamed buffer again: {ft}{dw}{ma}{fp}{P}{w}{dw}{`aP} will set things aright (note the use of the reverse quote). The put commands {p} and {P} do not affect the contents of the buffer. Therefore, multiple {p} or {P} will put multiple copies of the unnamed buffer into your file. Experiment with {d} and {p} on words, paragraphs, etc. Whatever {d} deletes, {p} can put. Position the cursor on Line 17 and {z^M}: Line 17: interest apple cat elephant boy dog girl hay farmer Our task is to alphabetize the words on line 17. With the named buffers (and a contrived example) it is quite easy: {"idw}{"adw}{"cdw}{"edw}{"bdw}{"ddw}{"gdw}{"hdw}{"fdw} stores each of the words in the named buffer corresponding to the first letter of each of the words ('interest' goes in buffer "i, 'apple' goes in buffer "a, etc.). Now to put the words in order type: {"ap$}{"bp$}{"cp$}{"dp$}{"ep$}{"fp$}{"gp$}{"hp$}{"ip$} Notice that, because 'farmer' was at the end of the line, {dw} did not include a space after it, and that, therefore, there is no space between 'farmer' and 'girl'. This is corrected with {Fg}{i ^[}. This example could have been done just as easily with lines as with words. You do not have to delete the text in order to put it into a buffer. If all you wish to do is to copy the text somewhere else, don't use {d}, rather use the yank commands {y} or {Y}. {y} is like {d} and {c} - an operator rather than a command. It, too, takes a buffer specification and a range specification. Therefore, instead of {dw}{P} to load the unnamed buffer with a word without deleting the word, use {yw} (yank a word). {Y} is designed yank lines, and not arbitrary ranges. That is, {Y} is equivalent to {yy} (remember that operators doubled means the current line), and {3Y} is equivalent to {3yy}. If the text you yank or modify forms a part of a line, or is an object such as a sentence which partially spans more than one line, then when you put the text back, it will be placed after the cursor (or before if you use {P}). If the yanked text forms whole lines, they will be put back as whole lines, without changing the current line. In this case, the put acts much like the {o} or {O} command. The named buffers "a through "z are not affected by changing edit files. However, the unnamed buffer is lost when you change files, so to move text from one file to another you should use a named buffer. Section 33: recovering lost lines Vi also keeps track of the last nine deletes, whether you ask for it or not. This is very convenient if you would like to recover some text that was accidentally deleted or modified. Position the cursor on line 18 following, and {z^M}. Line 18: line 1 Line 19: line 2 Line 20: line 3 Line 21: line 4 Line 22: line 5 Line 23: line 6 Line 24: line 7 Line 25: line 8 Line 26: line 9 Type {dd} nine times: now don't cheat with {9dd}! That is totally different. The command {"1p} will retrieve the last delete. Furthermore, when the numbered buffers are used, the repeat-command command {.} will increment the buffer numbers before executing, so that subsequent {.} will recover all nine of the deleted lines, albeit in reverse order. If you would like to review the last nine deletes without affecting the buffers or your file, do an undo {u} after each put {p} and {.}: {"1p}{u}{.}{u}{.}{u}{.}{u}{.}{u}{.}{u}{.}{u}{.}{u}{.} will show you all the buffers and leave them and your file intact. If you had cheated above and deleted the nine lines with {9dd}, all nine lines would have been stored in both the unnamed buffer and in buffer number 1. (Obviously, buffer number 1 IS the unnamed buffer and is just the default buffer for the modify commands.) Section 34: advanced file manipulation: {:r} {:e} {:n} {:w} {!} {:!} We've already looked at writing out the file you are editing with the {:w} command. Now let's look at some other vi commands to make editing more efficient. Section 34.1: more than one file at a time {:n} {:args} Many times you will want to edit more than one file in an editing session. Instead of entering vi and editing the first file, exiting, entering vi and editing the second, etc., vi will allow you to specify ALL files that you wish to edit on the invocation line. Therefore, if you wanted to edit file1 and file2: % vi file1 file2 will set up file1 for editing. When you are done editing file one, write it out {:w^M} and then type {:n^M} to get the next file on the list. On large programming projects with many source files, it is often convenient just to specify all source files with, say: % vi *.c If {:n^M} brings in a file that does not need any editing, another {:n^M} will bring in the next file. If you have made changes to the first file, but decide to discard these changes and proceed to the next file, {:n!^M} forces the editor to discard the current contents of the editor. You can specify a new list of files after {:n}; e.g., {:n f1 f2 f3^M}. This will replace the current list of files (if any). You can see the current list of files being edited with {:args^M}. Section 34.2: reading files and command output: {:r} Typing {:r fname^M} will read the contents of file fname into the editor and put the contents AFTER the cursor line. Typing {:r !cmd^M} will read the output of the command cmd and place that output after the cursor line. Section 34.3: invoking vi from within vi: {:e} {:vi} To edit another file not mentioned on the invocation line, type {:e filename^M} or {:vi filename^M}. If you wish to discard the changes to the current file, use the exclamation point after the command, e.g. {:e! filename^M}. Section 34.4: escaping to a shell: {:sh} {:!} {^Z} Occasionally, it is useful to interrupt the current editing session to perform a UNIX task. However, there is no need to write the current file out, exit the editor, perform the task, and then reinvoke the editor on the same file. One thing to do is to spin off another process. If there are several UNIX commands you will need to execute, simply create another shell with {:sh^M}. At this point, the editor is put to sleep and will be reawakened when you log out of the shell. If it is a single command that you want to execute, type {:!cmd^M}, where cmd is the command that you wish to run. The output of the command will come to the terminal as normal, and will not be made part of your file. The message "[Hit return to continue]" will be displayed by vi after the command is finished. Hitting return will then repaint the screen. Typing another {:!cmd^M} at this point is also acceptable. However, there is a quicker, easier way: type {^Z}. Now this is a little tricky, but hang in there. When you logged into UNIX, the first program you began communicating with was a program that is called a "shell" (i.e. it 'lays over' the operating system protecting you from it, sort of like a considerate porcupine). When you got your first prompt on the terminal (probably a '%' character) this was the shell telling you to type your first command. When you typed {vi filename} for some file, the shell did not go away, it just went to sleep. The shell is now the parent of vi. When you type {^Z} the editor goes to sleep, the shell wakes up and says "you rang?" in the form of another prompt (probably '%'). At this point you are talking to the shell again and you can do anything that you could before including edit another file! (The only thing you can't do is log out: you will get the message "There are stopped jobs.") When your business with the shell is done, type {fg} for 'foreground' and the last process which you ^Z'd out of will be reawakened and the shell will go back to sleep. I will refer you to the documentation for the Berkeley shell 'csh' for more information on this useful capability. Section 34.5: writing parts of a file: {:w} The {:w} command will accept a range specifier that will then write only a selected range of lines to a file. To write this section to a file, position the cursor on the section line (e.g. {/^Section 34.5:/^M}) and {z^M}. Now type {^G} to find out the line number (it will be something like "line 513"). Now {/^Section 34.6:/-1^M} to find the last line of this section, and {^G} to find its line number (it will be something like 542). To write out this section of text by itself to a separate file which we will call "sepfile", type {:510,542w sepfile^M}. If sepfile already exists, you will have to use the exclamation point: {:1147,1168w! sepfile^M} or write to a different, non- existent file. {:!cat sepfile^M} will display the file just written, and it should be the contents of this section. There is an alternate method of determining the line numbers for the write. {:set number^M} will repaint the screen with each line numbered. When the file is written and the numbers no longer needed, {:set nonumber^M} will remove the numbers, and {^R} will adjust the screen. Or, if you remember your earlier lessons about marking lines of text, mark the beginning and ending lines. Suppose we had used {ma} to mark the first line of the section and {mb} to mark the last. Then the command {:'a,'bw sepfile^M} will write the section into "sepfile". In general, you can replace a line number with the 'name' of a marked line (a single-quote followed by the letter used to mark the line) Section 34.6: filtering portions of text: {!} {!} is an operator like {c} and {d}. That is, it consists of a repetition count, {!}, and a range specifier. Once the {!} operator is entered in its entirety, a prompt will be given at the bottom of the screen for a UNIX command. The text specified by the {!} operator is then deleted and passed/filtered/piped to the UNIX command you type. The output of the UNIX command is then placed in your file. For example, place the cursor at the beginning of the following line and {z^M}: ls -l vi.tutorial ********* marks the bottom of the output from the ls command ********** Now type {!!csh^M}. The line will be replaced with the output from the ls command. The {u} command works on {!}, also. Here is an extended exercise to display some of these capabilities. When this tutorial was prepared, certain auxiliary programs were created to aid in its development. Of major concern was the formatting of sections of the tutorial to fit on a single screen, particularly the first few sections. What was needed was a vi command that would 'format' a paragraph; that is, fill out lines with as many words as would fit in eighty columns. There is no such vi command. Therefore, another method had to be found. Of course, nroff was designed to do text formatting. However, it produces a 'page'; meaning that there may be many blank lines at the end of a formatted paragraph from nroff. The awk program was used to strip these blank lines from the output from nroff. Below are the two files used for this purpose: I refer you to documentation on nroff and awk for a full explanation of their function. Position the cursor on the next line and {z^M}. ******** contents of file f ********** # nroff -i form.mac | awk "length != 0 { print }" ***** contents of file form.mac ****** .na .nh .ll 79 .ec  .c2  .cc  ************************************** Determine the line numbers of the two lines of file f. They should be something like 574 and 575, although you better double check: this file is under constant revision and the line numbers may change inadvertently. Then {:574,575w f^M}. Do the same for the lines of file form.mac. They will be approximately 577 and 582. Then {:577,582w form.mac^M}. File f must have execute privileges as a shell file: {:!chmod 744 f^M}. Observe that this paragraph is rather ratty in appearance. With our newly created files we can clean it up dramatically. Position the cursor at the beginning of this paragraph and type the following sequence of characters (note that we must abandon temporarily our convention of curly braces since the command itself contains a curly brace - we will use square brackets for the nonce): [!}f^M]. Here is a brief explanation of what has happened. By typing [!}f^M] we specified that the paragraph (all text between the cursor and the first blank line) will be removed from the edit file and piped to a UNIX program called "f". This is a shell command file that we have created. This shell file runs nroff, pipes its output to awk to remove blank lines, and the output from awk is then read back into our file in the place of the old, ratty paragraph. The file form.mac is a list of commands to nroff to get it to produce paragraphs to our taste (the right margin is not justified, the line is 79 characters long, words are not hyphenated, and three nroff characters are renamed to avoid conflict: note that in this file, the {^G} you see there is vi's display of the control-G character, and not the two separate characters ^ up-arrow and G upper-case g). This example was created before the existence of the fmt program. I now type [!}fmt^M] to get the same effect much faster. Actually, I don't type those six keys each time: I have an abbreviation (which see). Section 35: searching with magic patterns The documentation available for "magic patterns" (i.e. regular expressions) is very scanty. The following should explain this possibly very confusing feature of the editor. This section assumes that the magic option is on. To make sure, you might want to type {:set magic^M}. By "magic pattern" we mean a general description of a piece of text that the editor attempts to find during a search. Most search patterns consist of strings of characters that must be matched exactly, e.g. {/card/^M} searches for a specific string of four characters. Let us suppose that you have discovered that you consistently have mistyped this simple word as either ccrd or czrd (this is not so far-fetched for touch typists). You could {/ccrd/^M} and {n} until there are no more of this spelling, followed by {/czrd/^M} and {n} until there are no more of these. Or you could {/c.rd/^M} and catch all of them on the first pass. Try typing {/c.rd/^M} followed by several {n} and observe the effect. Line 27: card cord curd ceard When '.' is used in a search string, it has the effect of matching any single character. The character '^' (up-arrow) used at the beginning of a search string means the beginning of the line. {/^Line 27/^M} will find the example line above, while {/Line 27/^M} will find an occurrence of this string anywhere in the line. Similarly, {/ the$/^M} will find all occurrences of the word 'the' occurring at the end of a line. There are several of them in this file. Note that {:set nomagic^M} will turn off the special meaning of these magic characters EXCEPT for '^' and '$' which retain their special meanings at the beginning and end of a search string. Within the search string they hold no special meaning. Try {/\/ the$\//^M} and note that the dollar-sign is not the last character in the search string. Let the dollar-sign be the last character in the search string, as in {/\/ the$/^M} and observe the result. Observe the result of {/back.*file/^M}. This command, followed by sufficient {n}, will show you all lines in the file that contain both the words 'back' and 'file' on the same line. The '*' magic character specifies that the previous regular expression (the '.' in our example) is to be repeatedly matched zero or more times. In our example we specified that the words 'back' and 'file' must appear on the same line (they may be parts of words such as 'backwards' or 'workfile') separated by any number (including zero) of characters. We could have specified that 'back' and 'file' are to be words by themselves by using the magic sequences '\<' or '\>'. E.g. {/\.*\/^M}. The sequence '\<' specifies that this point of the search string must match the beginning of a word, while '\>' specifies a match at the end of a word. By surrounding a string with these characters we have specified that they must be words. To find all words that begin with an 'l' or a 'w', followed by an 'a' or an 'e', and ending in 'ing', try {/\<[lw][ea][a-z]*ing\>/^M}. This will match words like 'learning', 'warning', and 'leading'. The '[..]' notation matches exactly ONE character. The character matched will be one of the characters enclosed in the square brackets. The characters may be specified individually as in [abcd] or a '-' may be used to specify a range of characters as in [a-d]. That is, [az] will match the letter 'a' OR the letter 'z', while [a-z] will match any of the lower case letters from 'a' through 'z'. If you would like to match either an 'a', a '-', or a 'z', then the '-' must be escaped: [a\-z] will match ONE of the three characters 'a', '-', or 'z'. If you wish to find all Capitalized words, try {/\<[A-Z][a-z]*\>/^M}. The following will find all character sequences that do NOT begin with an uncapitalized letter by applying a special meaning to the '^' character in square brackets: {/\<[^a-z][a-z]*\>/^M}. When '^' is the first character of a square-bracket expression, it specifies "all but these characters". (No one claimed vi was consistent.) To find all variable names (the first character is alphabetic, the remaining characters are alphanumeric): try {/\<[A-Za-z][A-Za-z0-9]*\>/^M}. In summary, here are the primitives for building regular expressions: ^ at beginning of pattern, matches beginning of line $ at end of pattern, matches end of line . matches any single character \< matches the beginning of a word \> matches the end of a word [str] matches any single character in str [^str] matches any single character NOT in str [x-y] matches any character in the ASCII range between x and y * matches any number (including zero) of the preceding pattern Section 36: advanced substitution: {:s} The straightforward colon-substitute command looks like the substitute command of most line-oriented editors. Indeed, vi is nothing more than a superstructure on the line-oriented editor ex and the colon commands are simply a way of accessing commands within ex (see section #EX). This gives us a lot of global file processing not usually found in visual oriented editors. The colon-substitute command looks like: {:s/ .. / .. /^M} and will find the pattern specified after the first slash (this is called the search pattern), and replace it with the pattern specified after the second slash (called, obviously enough, the replacement pattern). E.g. position the cursor on line 28 below and {:s/esample/example/^M}: Line 28: This is an esample. The {u} and {U} commands work for {:s}. The first pattern (the search pattern) may be a regular expression just as for the search command (after all, it IS a search, albeit limited to the current line). Do an {u} on the above line, and try the following substitute, which will do almost the same thing: {:s/s[^ ]/x/^M}. Better undo it with {u}. The first pattern {s[^ ]} matches an 's' NOT followed by a blank: the search therefore ignores the 's'es in 'This' and 'is'. However, the character matched by {[^ ]} must appear in the replacement pattern. But, in general, we do not know what that character is! (In this particular example we obviously do, but more complicated examples will follow.) Therefore, vi (really ex) has a duplication mechanism to copy patterns matched in the search string into the replacement string. Line 29 below is a copy of line 28 above so you can adjust your screen. Line 29: This is an esample. In general, you can nest parts of the search pattern in \( .. \) and refer to it in the replacement pattern as \n, where n is a digit. The problem outlined in the previous paragraph is solved with {:s/s\([^ ]\)/x\1/^M}: try it. Here \1 refers to the first pattern grouping \( .. \) in the search string. Obviously, for a single line, this is rather tedious. Where it becomes powerful, if not necessary, is in colon-substitutes that cover a range of lines. (See the next section for a particularly comprehensive example.) If the entire character sequence matched by the search pattern is needed in the replacement pattern, then the unescaped character '&' can be used. On Line 29 above, try {:s/an e.ample/not &/^M}. If another line is to have the word 'not' prepended to a pattern, then '~' can save you from re-typing the replacement pattern. E.g. {:s/some pattern/~/^M} after the previous example would be equivalent to {:s/some pattern/not &/^M}. One other useful replacement pattern allows you to change the case of individual letters. The sequences {\u} and {\l} cause the immediately following character in the replacement to be converted to upper- or lower-case, respectively, if this character is a letter. The sequences {\U} and {\L} turn such conversion on, either until {\E} or {\e} is encountered, or until the end of the replacement pattern. For example, position the cursor on a line: pick a line, any line. Type {:s/.*/\U&/^M} and observe the result. You can undo it with {u}. The search pattern may actually match more than once on a single line. However, only the first pattern is substituted. If you would like ALL patterns matched on the line to be substituted, append a 'g' after the replacement pattern: {:s/123/456/g^M} will substitute EVERY occurrence on the line of 123 with 456. Section 37: advanced line addressing: {:p} {:g} {:v} Ex (available through the colon command in vi) offers several methods for specifying the lines on which a set of commands will act. For example, if you would like to see lines 50 through 100 of your file: {:50,100p^M} will display them, wait for you to [Hit return to continue], and leave you on line 100. Obviously, it would be easier just to do {100G} from within vi. But what if you would like to make changes to just those lines? Then the addressing is important and powerful. Line 30: This is a text. Line 31: Here is another text. Line 32: One more text line. The lines above contain a typing error that the author of this tutorial tends to make every time he attempts to type the word 'test'. To change all of these 'text's into 'test's, try the following: {:/^Line 30/,/^Line 32/s/text/test/^M}. This finds the beginning and end of the portion of text to be changed, and limits the substitution to each of the lines in that range. The {u} command applies to ALL of the substitutions as a group. This provides a mechanism for powerful text manipulations. And very complicated examples. Line 33: This test is a. Line 34: Here test is another. Line 35: One line more test. The above three lines have the second word out of order. The following command string will put things right. Be very careful when typing this: it is very long, full of special characters, and easy to mess up. You may want to consider reading the following section to understand it before trying the experiment. Don't worry about messing up the rest of the file, though: the address range is specified. {:/^Line 33/,/^Line 35/s/\([^:]*\): \([^ ]*\) \([^ ]*\) \([^.]*\)/\1: \2 \4 \3/^M} There are several things to note about this command string. First of all, the range of the substitute was limited by the address specification {/^Line 33/,/^Line 35/^M}. It might have been simpler to do {:set number^M} to see the line numbers directly, and then, in place of the two searches, typed the line numbers, e.g. {1396,1398}. Or to mark the lines with {ma} and {mb} and use {'a,'b}. Then follows the substitute pattern itself. To make it easier to understand what the substitute is doing, the command is duplicated below with the various patterns named for easier reference: s/\([^:]*\): \([^ ]*\) \([^ ]*\) \([^.]*\)/\1: \2 \4 \3/ |--\1---| |--\2---| |--\3---| |--\4---| |--------search pattern------------------|-replacement| |--pattern---| In overview, the substitute looks for a particular pattern made up of sub-patterns, which are named \1, \2, \3, and \4. These patterns are specified by stating what they are NOT. Pattern \1 is the sequence of characters that are NOT colons: in the search string, {[^:]} will match exactly one character that is not a colon, while appending the asterisk {[^:]*} specifies that the 'not a colon' pattern is to be repeated until no longer satisfied, and {\([^:]*\)} then gives the pattern its name, in this case \1. Outside of the specification of \1 comes {: }, specifying that the next two characters must be a colon followed by a blank. Patterns \2 and \3 are similar, specifying character sequences that are not blanks. Pattern \4 matches up to the period at the end of the line. The replacement pattern then consists of specifying the new order of the patterns. This is a particularly complicated example, perhaps the most complicated in this tutorial/reference. For our small examples, it is obviously tedious and error prone. For large files, however, it may be the most efficient way to make the desired modifications. (The reader is advised to look at the documentation for awk. This tool is very powerful and slightly simpler to use than vi for this kind of file manipulation. But, it is another command language to learn.) Many times, you will not want to operate on every line in a certain range. Rather you will want to make changes on lines that satisfy certain patterns; e.g. for every line that has the string 'NPS' on it, change 'NPS' to 'Naval Postgraduate School'. The {:g} addressing command was designed for this purpose. The example of this paragraph could be typed as {:g/NPS/s//Naval Postgraduate School/^M}. The general format of the command is {:g/(pattern)/cmds^M} and it works in the following way: all lines that match the pattern following the {:g} are 'tagged' in a special way. Then each of these lines have the commands following the pattern executed over them. Line 36: ABC rhino george farmer Dick jester lest Line 37: george farmer rhino lest jester ABC Line 38: rhino lest george Dick farmer ABC jester Type: {:g/^Line.*ABC/s/Dick/Harry Binswanger/|s/george farmer/gentleman george/p^M} There are several things of note here. First, lines 36, 37, and 38 above are tagged by the {:g}. Type {:g/^Line.*ABC/p^M} to verify this. Second, there are two substitutes on the same line separated by '|'. In general, any colon commands can be strung together with '|'. Third, both substitutes operate on all three lines, even though the first stubstitute works on only two of the lines (36 and 38). Fourth, the second substitute works on only two lines (36 and 37) and those are the two lines printed by the trailing 'p'. The {:v} command works similarly to the {:g} command, except that the sense of the test for 'tagging' the lines is reversed: all lines NOT matching the search pattern are tagged and operated on by the commands. Using {^V} to quote carriage return (see section 39) can be used in global substitutions to split two lines. For example, the command {:g/\. /s//.^V^M/g^M} will change your file so that each sentence is on a separate line. (Note that we have to 'escape' the '.', because '.' by itself matches any character. Our command says to find any line which contains a period followed by 2 spaces, and inserts a carriage return after the period.) Caveat: In some of the documentation for ex and vi you may find the comment to the effect that {\^M} can be used between commands following {:g}. The author of this tutorial has never gotten this to work and has crashed the editor trying. Section 38: higher level text objects and nroff: {(} {)} [{] [}] {[[} {]]} (Note: this section may be a little confusing because of our command notation. Using curly braces to surround command strings works fine as long as the command string does not contain any curly braces itself. However, the curly braces are legitimate commands in vi. Therefore, for any command sequence that contains curly braces, we will surround that sequence with SQUARE braces, as on the previous Section line.) In working with a document, particularly if using the text formatting programs nroff or troff, it is often advantageous to work in terms of sentences, paragraphs, and sections. The operations {(} and {)} move to the beginning of the previous and next sentences, respectively. Thus the command {d)} will delete the rest of the current sentence; likewise {d(} will delete the previous sentence if you are at the beginning of the current sentence, or, if you are not at the beginning of a sentence, it will delete the current sentence from the beginning up to where you are. A sentence is defined to end at a '.', '!', or '?' which is followed by either the end of a line, or by two spaces. Any number of closing ')', ']', '"', and ''' characters may appear after the '.', '!', or '?' before the spaces or end of line. Therefore, the {(} and {)} commands would recognize only one sentence in the following line, but two sentences on the second following line. Line 39: This is one sentence. Even though it looks like two. Line 40: This is two sentences. Because it has two spaces after the '.'. The operations [{] and [}] move over paragraphs and the operations {[[} and {]]} move over sections. A paragraph begins after each empty line, and also at each of a set of nroff paragraph macros. A section begins after each line with a form-feed ^L in the first column, and at each of a set of nroff section macros. When preparing a text file as input to nroff, you will probably be using a set of nroff macros to make the formatting specifications easier, or more to your taste. These macros are invoked by beginning a line with a period followed by the one or two letter macro name. Vi has been programmed to recognize these nroff macros, and if it doesn't recognize your particular macro you can use the {:set paragraphs} or {:set sections} commands so that it will. Section 39: more about inserting text There are a number of characters which you can use to make correnctions during input mode. These are summarized in the following table. ^H deletes the last input character ^W deletes the last input word (erase) same as ^H; each terminal can define its own erase character; for some it is ^H, for others it is the DELETE key, and for others it is '@'. (kill) deletes the input on this line; each terminal can define its own line-kill character; for some it is ^U, for others it is '@'; you will need to experiment on your terminal to find out what your line-kill and erase characters are. \ escapes a following ^H, (kill), and (erase) characters: i.e. this is how to put these characters in your file. ^[ escape key; ends insertion mode ^? the delete key; interrupts an insertion, terminating it abnormally. ^M the return key; starts a new line. ^D backtabs over the indentation set by the autoindent option 0^D backtabs over all indentation back to the beginning of the line ^^D (up-arrow followed by control-d)same as 0^D, except the indentation will be restored at the beginning of the next line. ^V quotes the next non-printing character into the file If you wish to type in your erase or kill character (say # or @ or ^U) then you must precede it with a \, just as you would do at the normal system command level. A more general way of typing non-printing characters into the file is to precede them with a ^V. The ^V echoes as a ^ character on which the cursor rests. This indicates that the editor expects you to type a control character and it will be inserted into the file at that point. There are a few exceptions to note. The implementation of the editor does not allow the null character ^@ to appear in files. Also the linefeed character ^J is used by the editor to separate lines in the file, so it cannot appear in the middle of a line. (Trying to insert a ^M into a file, or putting it in the replacement part of a substitution string will result in the matched line being split in two. This, in effect, is how to split lines by using a substitution.) You can insert any other character, however, if you wait for the editor to echo the ^ before you type the character. In fact, the editor will treat a following letter as a request for the corresponding control character. This is the only way to type ^S or ^Q, since the system normally uses them to suspend and resume output and never gives them to the editor to process. If you are using the autoindent option you can backtab over the indent which it supplies by typing a ^D. This backs up to the boundary specified by the shiftwidth option. This only works immediately after the supplied autoindent. When you are using the autoindent option you may wish to place a label at the left margin of a line. The way to do this easily is to type ^ (up-arrow) and then ^D. The editor will move the cursor to the left margin for one line, and restore the previous indent on the next. You can also type a 0 followed immediately by a ^D if you wish to kill all indentation and not have it resume on the next line. Section 40: more on operators: {d} {c} {<} {>} {!} {=} {y} Below is a non-exhaustive list of commands that can follow the operators to affect the range over which the operators will work. However, note that the operators {<}, {>}, {!}, and {=} do not operate on any object less than a line. Try {!w} and you will get a beep. To get the operator to work on just the current line, double it. E.g. {<<}. suffix will operate on ------ ------------------------ ^[ cancels the command w the word to the right of the cursor W ditto, but ignoring punctuation b the word to the left of the cursor B ditto, but ignoring punctuation e see below. E ditto (space) a character $ to the end of the line ^ to the beginning of the line / .. / up to, but not including, the string ? .. ? back to and including the string fc up to and including the occurrence of c Fc back to and including the occurrence of c tc up to but not including the occurrence of c Tc back to but not including the occurrence of c ^M TWO lines (that's right: two) (number)^M that many lines plus one (number)G up to and including line (number) ( the previous sentence if you are at the beginning of the current sentence, or the current sentence up to where you are if you are not at the beginning of the current sentence. Here, 'sentence' refers to the intuitive notion of an English sentence, ending with '!', '?', or '.' and followed by an end of line or two spaces. ) the rest of the current sentence { analogous to '(', but in reference to paragraphs: sections of text surrounded by blank lines } analogous to ')', but in reference to paragraphs [[ analogous to '(', but in reference to sections ]] analogous to ')', but in reference to sections H the first line on the screen M the middle line on the screen L the last line on the screen 3L through the third line from the bottom of the screen ^F forward a screenful ^B backward a screenful : : etc. etc. etc. This list is not exhaustive, but it should be sufficient to get the idea across: after the operator, you can specify a range with a move-the-cursor command, and that is the region of text over which the operator will be effective. Section 41: abbreviations: {:ab} When typing large documents you may find yourself typing a large phrase over and over. Vi gives you the ability to specify an abbreviation for a long string such that typing the abbreviation will automatically expand into the longer phrase. Type {:ab nps Naval Postgraduate School^M}. Now type: {iThis is to show off the nps's UNIX editor.^M^[} Section 42: vi's relationship with the ex editor: {:} Vi is actually one mode of editing within the editor ex. When you are running vi you can escape to the line oriented editor of ex by giving the command {Q}. All of the colon-commands which were introduced above are available in ex. Likewise, most ex commands can be invoked from vi using {:}. In rare instances, an internal error may occur in vi. In this case you will get a diagnostic and will be left in the command mode of ex. You can then save your work and quit if you wish by giving the command {x} after the colon prompt of ex. Or you can reenter vi (if you are brave) by giving ex the command {vi}. Section 43: vi on hardcopy terminals and dumb terminals: open mode (The author has not checked the following documentation for accuracy. It is abstracted from the Introduction to Vi Editing document.) If you are on a hardcopy terminal or a terminal which does not have a cursor which can move off the bottom line, you can still use the command set of vi, but in a different mode. When you give the vi command to UNIX, the editor will tell you that it is using open mode. This name comes from the open command in ex, which is used to get into the same mode. The only difference between visual mode (normal vi) and open mode is the way in which the text is displayed. In open mode the editor uses a single line window into the file, and moving backward and forward in the file causes new lines to be displayed, always below the current line. Two commands of vi work differently in open: {z} and {^R}. The {z} command does not take parameters, but rather draws a window of context around the current line and then returns you to the current line. If you are on a hardcopy terminal, the {^R} command will retype the current line. On such terminals, the editor normally uses two lines to represent the current line. The first line is a copy of the line as you started to edit it, and you work on the line below this line. When you delete characters, the editor types a number of \'s to show you the characters which are deleted. The editor also reprints the current line soon after such changes so that you can see what the line looks like again. It is sometimes useful to use this mode on very slow terminals which can support vi in the full screen mode. You can do this by entering ex and using an {open} command. ********************************************************************* Section 44: options: {:set} {setenv EXINIT} You will discover options as you need them. Do not worry about them very much on the first pass through this document. My advice is to glance through them, noting the ones that look interesting, ignoring the ones you don't understand, and try re-scanning them in a couple of weeks. If you decide that you have a favorite set of options and would like to change the default values for the editor, place a {setenv EXINIT} command in your .login file. When you are given an account under UNIX your directory has placed in it a file that is executed each time you log in. If one of the commands in this file sets the environment variable EXINIT to a string of vi commands, you can have many things done for you each time you invoke vi. For example, if you decide that you don't like tabstops placed every eight columns but prefer every four columns, and that you wish the editor to insert linefeeds for you when your typing gets you close to column 72, and you want autoindentation, then include the following line in your .login file: setenv EXINIT='set tabstop=4 wrapmargin=8 autoindent' or equivalently setenv EXINIT='se ts=4 wm=8 ai' Each time you bring up vi, this command will be executed and the options set. There are forty options in the vi/ex editor that the user can set for his/her own convenience. They are described in more detail in individual sections below. The section line will show the full spelling of the option name, the abbreviation, and the default value of the option. The text itself comes from the ex reference manual and is not the epitome of clarity. Section 44.1: {autoindent}, {ai} default: noai Can be used to ease the preparation of structured program text. At the beginning of each append, change or insert command or when a new line is opened or created by an append, change, insert, or substitute operation within open or visual mode, ex looks at the line being appended after, the first line changed or the line inserted before and calculates the amount of white space at the start of the line. It then aligns the cursor at the level of indentation so determined. If the user then types lines of text in, they will continue to be justified at the displayed indenting level. If more white space is typed at the beginning of a line, the following line will start aligned with the first non-white character of the previous line. To back the cursor up to the preceding tab stop one can hit {^D}. The tab stops going backwards are defined at multiples of the shiftwidth option. You cannot backspace over the indent, except by sending an end-of-file with a {^D}. A line with no characters added to it turns into a completely blank line (the white space provided for the autoindent is discarded). Also specially processed in this mode are lines beginning with an up-arrow `^' and immediately followed by a {^D}. This causes the input to be repositioned at the beginning of the line, but retaining the previous indent for the next line. Similarly, a `0' followed by a {^D} repositions at the beginning but without retaining the previous indent. Autoindent doesn't happen in global commands or when the input is not a terminal. Section 44.2: {autoprint}, {ap} default: ap Causes the current line to be printed after each delete, copy, join, move, substitute, t, undo or shift command. This has the same effect as supplying a trailing `p' to each such command. Autoprint is suppressed in globals, and only applies to the last of many commands on a line. Section 44.3: {autowrite}, {aw} default: noaw Causes the contents of the buffer to be written to the current file if you have modified it and give a next, rewind, stop, tag, or {!} command, or a control- up-arrow {^^} (switch files) or {^]} (tag goto) command in visual. Note, that the edit and ex commands do not autowrite. In each case, there is an equivalent way of switching when autowrite is set to avoid the autowrite ({edit} for next, rewind! for rewind, stop! for stop, tag! for tag, shell for {!}, and {:e #} and a {:ta!} command from within visual). Section 44.4: {beautify}, {bf} default: nobeautify Causes all control characters except tab ^I, newline ^M and form-feed ^L to be discarded from the input. A complaint is registered the first time a backspace character is discarded. Beautify does not apply to command input. Section 44.5: {directory}, {dir} default: dir=/tmp Specifies the directory in which ex places its buffer file. If this directory in not writable, then the editor will exit abruptly when it fails to be able to create its buffer there. Section 44.6: {edcompatible} default: noedcompatible Causes the presence or absence of g and c suffixes on substitute commands to be remembered, and to be toggled by repeating the suffices. The suffix r makes the substitution be as in the {~} command, instead of like {&}. [Author's note: this should not concern users of vi.] Section 44.7: {errorbells}, {eb} default: noeb Error messages are preceded by a bell. However, bell ringing in open and visual modes on errors is not suppressed by setting noeb. If possible the editor always places the error message in a standout mode of the terminal (such as inverse video) instead of ringing the bell. Section 44.8: {hardtabs}, {ht} default: ht=8 Gives the boundaries on which terminal hardware tabs are set (or on which the system expands tabs). Section 44.9: {ignorecase}, {ic} default: noic All upper case characters in the text are mapped to lower case in regular expression matching. In addition, all upper case characters in regular expressions are mapped to lower case except in character class specifications (that is, character in square brackets). Section 44.10: {lisp} default: nolisp Autoindent indents appropriately for lisp code, and the {(}, {)}, [{], [}], {[[}, and {]]} commands in open and visual modes are modified in a striaghtforward, intuitive fashion to have meaning for lisp. [Author's note: but don't ask me to define them precisely.] Section 44.11: {list} default: nolist All printed lines will be displayed (more) unambiguously, showing tabs as ^I and end-of-lines with `$'. This is the same as in the ex command {list}. Section 44.12: {magic} default: magic for {ex} and {vi}, nomagic for edit. If nomagic is set, the number of regular expression metacharacters is greatly reduced, with only up-arrow `^' and `$' having special effects. In addition the metacharacters `~' and `&' of the replacement pattern are treated as normal characters. All the normal metacharacters may be made magic when nomagic is set by preceding them with a `\'. [Author's note: In other words, if magic is set a back-slant turns the magic off for the following character, and if nomagic is set a back-slant turns the magic ON for the following character. And, no, we are not playing Dungeons and Dragons, although I think the writers of these option notes must have played it all the time.] Section 44.13: {mesg} default: mesg Causes write permission to be turned off to the terminal while you are in visual mode, if nomesg is set. [Author's note: I don't know if anyone could have made any one sentence paragraph more confusing than this one. What it says is: mesg allows people to write to you even if you are in visual or open mode; nomesg locks your terminal so they can't write to you and mess up your screen.] Section 44.14: {number, nu} default: nonumber Causes all output lines to be printed with their line numbers. In addition each input line will be prompted with its line number. Section 44.15: {open} default: open If {noopen}, the commands open and visual are not permitted. This is set for edit to prevent confusion resulting from accidental entry to open or visual mode. [Author's note: As you may have guessed by now, there are actually three editors available under Berkeley UNIX that are in reality the same program, ex, with different options set: ex itself, vi, and edit.] Section 44.16: {optimize, opt} default: optimize Throughput of text is expedited by setting the terminal to not do automatic carriage returns when printing more than one (logical) line of output, greatly speeding output on terminals without addressable cursors when text with leading white space is printed. [Author's note: I still don't know what this option does.] Section 44.17: {paragraphs, para} default: para=IPLPPPQPP LIbp Specifies the paragraphs for the [{] and [}] operations in open and visual. The pairs of characters in the option's value are the names of the nroff macros which start paragraphs. Section 44.18: {prompt} default: prompt Command mode input is prompted for with a `:'. [Author's note: Doesn't seem to have any effect on vi.] Section 44.19: {readonly}, {ro} default: noro, unless invoked with -R or insufficient privileges on file This option allows you to guarantee that you won't clobber your file by accident. You can set the option and writes will fail unless you use an `!' after the write. Commands such as {x}, {ZZ}, the autowrite option, and in general anything that writes is affected. This option is turned on if you invoke the editor with the -R flag. Section 44.20: {redraw} default: noredraw The editor simulates (using great amounts of output), an intelligent terminal on a dumb terminal (e.g. during insertions in visual the characters to the right of the cursor position are refreshed as each input character is typed). Useful only at very high baud rates, and should be used only if the system is not heavily loaded: you will notice the performance degradation yourself. Section 44.21: {remap} default: remap If on, macros are repeatedly tried until they are unchanged. For example, if o is mapped to O, and O is mapped to I, then if remap is set, o will map to I, but if noremap is set, it will map to O . Section 44.22: {report} default: report=5 for ex and vi, 2 for edit Specifies a threshold for feedback from commands. Any command which modifies more than the specified number of lines will provide feedback as to the scope of its changes. For commands such as global, open, undo, and visual which have potentially more far reaching scope, the net change in the number of lines in the buffer is presented at the end of the command, subject to this same threshold. Thus notification is suppressed during a global command on the individual commands performed. Section 44.23: {scroll} default: scroll=1/2 window Determines the number of logical lines scrolled when a {^D} is received from a terminal in command mode, and determines the number of lines printed by a command mode z command (double the value of scroll). [Author's note: Doesn't seem to affect {^D} and {z} in visual (vi) mode.] Section 44.24: sections {sections} default: sections=SHNHH HU Specifies the section macros from nroff for the {[[} and {]]} operations in open and visual. The pairs of characters in the options's value are the names of the macros which start paragraphs. Section 44.25: {shell}, {sh} default: sh=/bin/sh Gives the path name of the shell forked for the shell escape command `!', and by the shell command. The default is taken from SHELL in the environment, if present. [Editor's note: I would suggest that you place the following line in your .login file: setenv SHELL '/bin/csh' ] Section 44.26: {shiftwidth}, {sw} default: sw=8 Used in reverse tabbing with {^D} when using autoindent to append text, and used by the shift commands. Should probably be the same value as the tabstop option. Section 44.27: {showmatch}, {sm} default: nosm In open and visual mode, when a `)' or `}' is typed, if the matching `(' or `{' is on the screen, move the cursor to it for one second. Extremely useful with complicated nested expressions, or with lisp. Section 44.28: {slowopen}, {slow} default: terminal dependent Affects the display algorithm used in visual mode, holding off display updating during input of new text to improve throughput when the terminal in use is both slow and unintelligent. See "An Introduction to Display Editing with Vi" for more details. Section 44.29: {tabstop}, {ts} default: ts=8 The editor expands tabs ^I to tabstop boundaries in the display. Section 44.30: {taglength}, {tl} default: tl=0 Tags are not significant beyond this many characters. A value of zero (the default) means that all characters are significant. Section 44.31: {tags} default: tags=tags /usr/lib/tags A path of files to be used as tag files for the tag command. A requested tag is searched for in the specified files, sequentially. By default files called tags are searched for in the current directory and in /usr/lib (a master file for the entire system). [Author's note: The author of this tutorial has never used this option, nor seen it used. I'm not even sure I know what they are talking about.] Section 44.32: {term} default: from environment variable TERM The terminal type of the output device. Section 44.33: {terse} default: noterse Shorter error diagnostics are produced for the experienced user. Section 44.34: {timeout} default: timeout Causes macros to time out after one second. Turn it off and they will wait forever. This is useful if you want multi-character macros, but if your terminal sends escape sequences for arrow keys, it will be necessary to hit escape twice to get a beep. [Editor's note: Another paragraph which requires a cryptographer.] Section 44.35: ttytype [Editor's note: I have found no documentation for this option at all.] Section 44.36: {warn} default: warn Warn if there has been `[No write since last change]' before a `!' command escape. Section 44.37: {window} default: window=speed dependent The number of lines in a text window in the visual command. The default is 8 at slow speeds (600 baud or less), 16 at medium speed (1200 baud), and the full screen (minus one line) at higher speeds. Section 44.38: {wrapscan}, {ws} default: ws Searches using the regular expressions in addressing will wrap around past the end of the file. Section 44.39: {wrapmargin}, {wm} default: wm=0 Defines a margin for automatic wrapover of text during input in open and visual modes. The numeric value is the number of columns from the right edge of the screen around which vi looks for a convenient place to insert a new-line character (wm=0 is OFF). This is very convenient for touch typists. Wrapmargin behaves much like fill/nojustify mode does in nroff. Section 44.40: {writeany}, {wa} default: nowa Inhibit the checks normally made before write commands, allowing a write to any file which the system protection mechanism will allow. Section 44.41: {w300}, {w1200}, {w9600} defaults: w300=8 w1200=16 w9600=full screen minus one These are not true options but set the default size of the window for when the speed is slow (300), medium (1200), or high (9600), respectively. They are suitable for an EXINIT and make it easy to change the 8/16/full screen rule. Section 45: Limitations Here are some editor limits that the user is likely to encounter: 1024 characters per line 256 characters per global command list 128 characters per file name 128 characters in the previous inserted and deleted text in open or visual 100 characters in a shell escape command 63 characters in a string valued option 30 characters in a tag name 250000 lines in the file (this is silently enforced). The visual implementation limits the number of macros defined with map to 32, and the total number of characters in macros to be less than 512. [Editor's note: these limits may not apply to versions after 4.1BSD.] vigor-0.016.orig/docs/tutorial/vi.beginner0100644000076400007640000010675007103707245017230 0ustar cjw44cjw44Section 1: {^F} {ZZ} To get out of this tutorial, type: ZZ (two capital Z's). Learning a new computer system implies learning a new text editor. These tutorial lessons were created by Dain Samples to help you come to grips with UC Berkeley's screen oriented editor called vi (for VIsual). This tutorial uses the vi editor itself as the means of presentation. For best use of this tutorial, read all of a screen before performing any of the indicated actions. This tutorial (or, at least, the first half of it) has been designed to systematically present the vi commands IF THE INSTRUCTIONS ARE FOLLOWED! If you are too adventuresome, you may find yourself lost. If you ever find yourself stuck, remember the first line of this section. OK, now find the control key on your keyboard; it usually has CTL or CTRL written on its upper surface. Your first assignment is to hold the control key down while you press the 'F' key on your keyboard. Please do so now. Section 2: {^F} {^B} Many of vi's commands use the control key and some other key in combination, as with the control and the 'F' key above. This is abbreviated CTL-F, or ^F. As you have probably guessed by now, ^F (CTL-F) moves you forward a fixed number of lines in the file. Throughout the remainder of the tutorial when you are ready to advance to the next section of text, hit ^F. The opposite command is ^B. Just for fun, you might want to try a ^B to see the previous section again. Be sure to do a ^F to return you here. Determine what the cursor looks like on your screen. Whatever it is (a box, an underscore, blinking, flashing, inverse, etc.) it should now be positioned in the upper left-hand corner of your screen under or on the S of Section. Become familiar with your cursor: to use vi correctly it is important to always know where the cursor is. Did you notice that when you do a ^F the cursor is left at the top of the screen, and a ^B leaves the cursor near the bottom of the screen? Try the two commands ^B^F again. And now do another ^F to see the next section. Section 3: {^F} {^B} You now have two basic commands for examining a file, both forwards (^F) and backwards (^B). Note that these are vi text editing commands: they are not commands for the tutorial. Indeed, this tutorial is nothing but a text file which you are now editing. Everything you do and learn in this tutorial will be applicable to editing text files. Therefore, when you are editing a file and are ready to see more of the text, entering ^F will get you to the next section of the file. Entering ^B will show you the previous section. Time for you to do another ^F. Section 4: {^F} {^B} {^M} (return key) We will adopt the notation of putting commands in curly braces so we can write them unambiguously. For example, if you are to type the command sequence "control B control F" (as we asked you to do above) it would appear as {^B^F}. This allows clear delineation of the command strings from the text. Remember that the curly braces are NOT part of the command string you are to type. Do NOT type the curly braces. Sometimes, the command string in the curly braces will be rather long, and may be such that the first couple of characters of the command will erase from the screen the string you are trying to read and type. It is suggested that you write down the longer commands BEFORE you type them so you won't forget them once they disappear. Now locate the return key on your keyboard: it is usually marked 'RETURN', indicate hitting the return key. In fact, the control-M key sequence is exactly the same as if you hit the return key, and vice versa. Now type {^F}. Section 5: {:q!} {ZZ} {^M} (return key) Recognize that this tutorial is nothing more than a text file that you are editing. This means that if you do something wrong, it is possible for you to destroy the information in this file. Don't worry. If this happens, type {ZZ} (two capital Z's) or {:q!^M} to leave the tutorial. Restart the tutorial. Once in the tutorial, you can then page forward with {^F} until you are back to where you want to be. (There are easier ways to do this, some of which will be discussed later, but this is the most straightforward.) You may want to write these commands down in a convenient place for quick reference: {:q!^M} and {ZZ} We will assume that you now know to do a {^F} to advance the file Section 6: {m} {G} {'} {z} Now that you know how to get around in the file via ^F and ^B let's look at other ways of examining a text file. Sometimes it is necessary, in the midst of editing a file, to examine another part of the file. You are then faced with the problem of remembering your place in the file, looking at the other text, and then getting back to your original location. Vi has a 'mark' command, m. Type {mp}. You have just 'marked' your current location in the file and given it the name 'p'. The command string below will do three things: position you at the beginning of the file (line 1), then return you to the location 'p' that you just marked with the 'm' command, and, since the screen will not look exactly the same as it does right now, the 'z' command will reposition the screen. (You may want to write the string down before typing it: once you type {1G} it will no longer be on the screen.) So now type {1G'pz^M} - a one followed by a capital G, followed by the quote mark, followed by a lower case 'p', then a lower case 'z', then a return (which is the same as a ^M). The {1G} moves you to line 1, i.e. the beginning of the file. The {'p} moves you to the location you marked with {mp}. The {z^M} command will repaint the screen putting the cursor at the top of the screen. (Now {^F}.) Section 7: {m} {G} {'} {z} Let's look at some variations on those commands. If you wanted to look at line 22 in the file and return to this location you could type {mp22G'p}. Do so now, observing that {22G} puts your cursor at the beginning of section 2 in the middle of the screen. Also note that, without the {z^M} command, the line with 'Section 7' on it is now in the MIDDLE of the screen, and not at the top. Our cursor is on the correct line (where we did the {mp} command) but the line is not where we might like it to be on the screen. That is the function of the {z^M} command. (Remember, ^M is the same as the 'return' key on your keyboard.) Type {z^M} now and observe the effect. As you can see, the 'Section 7' line is now at the top of the screen with the cursor happily under the capital S. If you would like the cursor line (i.e. the line which the cursor is on) in the middle of the screen again, you would type {z.}. If you wanted the cursor line to be at the BOTTOM of the screen, type {z-}. Try typing {z-z.z^M} and watch what happens. {^F} Section 8: {z} {m} {'} Note that the z command does not change the position of our cursor in the file itself, it simply moves the cursor around on the screen by moving the contents of the file around on the screen. The cursor stays on the same line of the file when using the z command. This brings up an important point. There are two questions that the users of vi continually need to know the answer to: "Where am I in the file?" and "Where am I on the screen?" The cursor on your terminal shows the answer to both questions. Some commands will move you around in the file, usually changing the location of the cursor on the screen as well. Other commands move the cursor around on the screen without changing your location in the file. Now type {ma}. Your location in the file has been given the name 'a'. If you type {'p'a} you will see the previous location we marked in section 7, and then will be returned to the current location. (You will want to do a {z^M} to repaint the screen afterwards.) Try it. {^F} Section 9: {m} {''} Now we can move about in our file pretty freely. By using the {m} command we can give the current cursor position a lower-case-character name, like 'p', 'a', 'e', 'm', or 'b'. Using the {G} command preceded by a line number we can look at any line in the file we like. Using the single quote command {'} followed by a character used in an {m} command, we can return to any location in the file we have marked. However, try {m3}, or {mM}. You should hear a beep, or bell. Only lower-case letters are acceptable to the {m} and {'} commands: numbers, upper-case letters, and special characters are not acceptable. If you type the {'} command with a character that is lower-case alphabetic but that has not been used in an {m} command, or for which the 'marked' text has been deleted, you will also get a beep. Try {'i}. You should get a beep because the command {mi} has never been issued. (Unless you've been experimenting.) The command {''} attempts to return you to the location at which you last modified some part of your file. However, my experience has been that it is difficult to predict exactly where you will end up. Section 10: {^M} {-} Now do {ma}, marking your position at the top of the screen. Now hit {^M} (or return) until the cursor is right ... * <- here, over/under the asterisk. Now type {mb'a'b} and watch the cursor move from the asterisk to the top of the screen and back again. The {^M} command moves the cursor to the beginning of the next line. Now type {^M} until the cursor is right ... * <- here. The command to move the cursor to the beginning of the previous line is {-}. Practice moving the cursor around on the screen by using {^M} and {-}. BE CAREFUL to not move the cursor OFF the screen just yet. If you do, type {'az^M}. Now we can move to any line within the screen. Practice moving around in the file using the {^F}, {^B}, {-}, {^M}, {z}, and {'} commands. When you are fairly confident that you can get to where you need to be in the file, and position the cursor on the screen where you want it type {'az^M^F} (which, of course, moves you back to the beginning of this section, repositions the cursor at the top of the screen, and advances you to the next section). Section 11: scrolling: {^M} The cursor should now be on the S of 'Section 11', and this should be on the first line of the screen. If it is not, do {^M} or {-} as appropriate to put the cursor on the section line, and type {z^M}. Type {mc} to mark your place. Now type {^M} until the cursor is on the last line of this screen. Now do one more {^M} and observe the result. This is called scrolling. When you attempted to move to a line not displayed on the screen, the line at the top of the screen was 'scrolled off', and a line at the bottom of the screen was 'scrolled on'. The top line with 'Section 11' should no longer be visible. Now type {'cz^M} to reset the screen and type {^F} for the next section. Section 12: {-} {z} The {-} command moves the cursor to the previous line in the file. Now type {-}, which attempts to move the cursor to the previous line in this file. However, that line is not on the screen. The resulting action will depend on your terminal. (Do a {^Mz^M} to reposition the file). On intelligent terminals (e.g. VT100s, Z19s, Concept 100s), a top line is 'scrolled on' and the bottom line is 'scrolled off'. Other terminals, however, may not have this 'reverse scrolling' feature. They will simply repaint the screen with the cursor line in the middle of the screen. On such terminals it is necessary to type {z^M} to get the cursor line back to the top of the screen. Section 13: Up until this point, the tutorial has always tried to make sure that the first line of each screen has on it the section number and a list of the commands covered in that section. This will no longer be strictly maintained. If you want the section line at the top of the screen, you now know enough commands to do it easily: do {^M} or {-} until the cursor is on the section line and then {z^M}. Also, from this point on, it may not be the case that a {^F} will put you at the beginning of the next section. Therefore, be aware of where you are in the file as we look at other commands. You may have to find your way back to a particular section without any help from the tutorial. If you do not feel comfortable with this, then it is suggested that you practice moving from section 1 to section 13, back and forth, using {^M}, {-}, {^F}, and {^B} commands for a while. Also make liberal use of the mark command {m}: if, for example, you make a habit of using {mz} to mark your current location in the file, then you will always be able to return to that location with {'z} if the editor does something strange and you have no idea where you are or what happened. And finally, the proscription against experimentation is hereby lifted: play with the editor. Feel free to try out variations on the commands and move around in the file. By this time you should be able to recover from any gross errors. Section 14: {^E} {^Y} {^D} {^U} Let us now look at a few other commands for moving around in the file, and moving the file around on the screen. Note that the commands we have already looked at are sufficient: you really don't need any more commands for looking in a file. The following commands are not absolutely necessary. However, they can make editing more convenient, and you should take note of their existence. But it would be perfectly valid to decide to ignore them on this first pass: you can learn them later when you see a need for them, if you ever do. First, let's clear up some potentially confusing language. In at least one place in the official document ('An Introduction to Display Editing with Vi' by William Joy, and Mark Horton, September 1980), the expression "to scroll down text" means that the cursor is moved down in your file. However, note that this may result in the text on the screen moving UP. This use of the word 'scroll' refers to the action of the cursor within the file. However, another legitimate use of the word refers to the action of the text on the screen. That is, if the lines on your screen move up toward the top of the screen, this would be 'scrolling the screen up'. If the lines move down toward the bottom of the screen, this would be refered to as scrolling down. I have tried to maintain the following jargon: 'scrolling' refers to what the text does on the screen, not to what the cursor does within the file. For the latter I will refer to the cursor 'moving', or to 'moving the cursor'. I realize that this is not necessarily consistent with Joy and Horton, but they were wrong. {^E} scrolls the whole screen up one line, keeping the cursor on the same line, if possible. However, if the cursor line is the first line on the screen, then the cursor is moved to the next line in the file. Try typing {^E}. {^Y} scrolls the screen down one line, keeping the cursor on the same line, if possible. However, if the cursor line is the last line on the screen, then the cursor is moved to the previous line in the file. Try it. {^D} moves the cursor down into the file, scrolling the screen up. {^U} moves the cursor up into the file, also scrolling the screen if the terminal you are on has the reverse scroll capability. Otherwise the screen is repainted. Note that {^E} and {^Y} move the cursor on the screen while trying to keep the cursor at the same place in the file (if possible: however, the cursor can never move off screen), while {^D} and {^U} keep the cursor at the same place on the screen while moving the cursor within the file. Section 15: {/ .. /^M} Another way to position yourself in the file is by giving the editor a string to search for. Type the following: {/Here 1/^M} and the cursor should end up right ...........................here ^. Now type {/Section 15:/^M} and the cursor will end up over/on .....................here ^. Now type {//^M} and observe that the cursor is now over the capital S five lines above this line. Typing {//^M} several more times will bounce the cursor back and forth between the two occurrences of the string. In other words, when you type a string between the two slashes, it is searched for. Typing the slashes with nothing between them acts as if you had typed the previous string again. Observe that the string you type between the two slashes is entered on the bottom line of the screen. Now type {/Search for x /^M} except replace the 'x' in the string with some other character, say 'b'. The message "Pattern not found" should appear on the bottom of the screen. If you hadn't replaced the 'x', then you would have found the string. Try it. Section 16: {? .. ?^M} {n} (search strings: ^ $) When you surround the sought-for string with slashes as in {/Search/}, the file is searched beginning from your current position in the file. If the string is not found by the end of the file, searching is restarted at the beginning of the file. However, if you do want the search to find the PREVIOUS rather than the NEXT occurrence of the string, surround the string with question marks instead of slash marks. Below are several occurrences of the same string. Here 2 Here 2 Here 2 Here 2 Here 2. Observe the effect of the following search commands (try them in the sequence shown): {/Here 2/^M} {//^M} {??^M} {/^Here 2/^M} {//^M} {??^M} {/Here 2$/^M} {//^M} {??^M} The first command looks for the next occurrence of the string 'Here 2'. However the second line of commands looks for an occurrence of 'Here 2' that is at the beginning of the line. When the up-arrow is the first character of a search string it stands for the beginning of the line. When the dollar-sign is the last character of the search string it stands for the end of the line. Therefore, the third line of commands searches for the string only when it is at the end of the line. Since there is only one place the string begins a line, and only one place the string ends the line, subsequent {//^M} and {??^M} will find those same strings over and over. The {n} command will find the next occurrence of the / or ? search string. Try {/Here 2/^M} followed by several {n} and observe the effect. Then try {??^M} followed by several {n}. The {n} command remembers the direction of the last search. It is just a way to save a few keystrokes. Section 17: \ and magic-characters in search strings Now type {/Here 3$/^M}. You might expect the cursor to end up right......^ here. However, you will get "Pattern not found" at the bottom of the screen. Remember that the dollar-sign stands for the end of the line. Somehow, you must tell vi that you do not want the end of the line, but a dollar-sign. In other words, you must take away the special meaning that the dollar-sign has for the search mechanism. You do this (for any special character, including the up-arrow ^) by putting a back-slash ('\', not '/') in front of the character. Now try {/Here 3\$/^M} and you should end up nine lines above this one. Try {//^M} and note that it returns you to the same place, and not to the first line of this paragraph: the back-slash character is not part of the search string and will not be found. To find the string in the first line of this paragraph, type {/Here 3\\\$/^M}. There are three back-slashes: the first takes away the special meaning from the second, and the third takes away the special meaning from the dollar-sign. Following is a list of the characters that have special meanings in search strings. If you wish to find a string containing one of these characters, you will have to be precede the character with a backslash. These characters are called magic characters because of the fun and games you can have with them and they can have with you, if you aren't aware of what they do. ^ - (up-arrow) beginning of a line $ - (dollar-sign) end of a line . - (period) matches any character \ - (backslant) the escape character itself [ - (square bracket) for finding patterns (see section #SEARCH) ] - (square bracket) ditto * - (asterisk) ditto Without trying to explain it here, note that {:set nomagic^M} turns off the special meanings of all but the ^ up-arrow, $ dollar-sign, and backslash characters. Section 18: {: (colon commands)} {ZZ} In this section we will discuss getting into and out of the editor in more detail. If you are editing a file and wish to save the results the command sequence {:w^M} writes the current contents of the file out to disk, using the file name you used when you invoked the editor. That is, if you are at the command level in Unix, and you invoke vi with {vi foo} where foo is the name of the file you wish to edit, then foo is the name of the file used by the {:w^M} command. If you are done, the write and quit commands can be combined into a single command {:wq^M}. An even simpler way is the command {ZZ} (two capital Z's). If, for some reason, you wish to exit without saving any changes you have made, {:q!^M} does the trick. If you have not made any changes, the exclamation point is not necessary: {:q^M}. Vi is pretty good about not letting you get out without warning you that you haven't saved your file. We have mentioned before that you are currently in the vi editor, editing a file. If you wish to start the tutorial over from the very beginning, you could {ZZ}, and then type {vi.tut beginner} in response to the Unix prompt. This will create a fresh copy of this file for you, which might be necessary if you accidentally destroyed the copy you were working with. Just do a search for the last section you were in: e.g. {/Section 18:/^Mz^M}. Section 19: {H} {M} {L} Here are a few more commands that will move you around on the screen. Again, they are not absolutely necessary, but they can make screen positioning easier: {H} - puts the cursor at the top of the screen (the 'home' position) {M} - puts the cursor in the middle of the screen {L} - puts the cursor at the bottom of the screen. Try typing {HML} and watch the cursor. Try typing {5HM5L} and note that 5H puts you five lines from the top of the screen, and 5L puts you five lines from the bottom of the screen. Section 20: {w} {b} {0} {W} {B} {e} {E} {'} {`} Up to this point we have concentrated on positioning in the file, and positioning on the screen. Now let's look at positioning in a line. Put the cursor at the beginning of the following line and type {z^M}: This is a test line: your cursor should initially be at its beginning. The test line should now be at the top of your screen. Type {w} several times. Note that it moves you forward to the beginning of the next word. Now type {b} (back to the beginning of the word) several times till you are at the beginning of the line. (If you accidentally type too many {b}, type {w} until you are on the beginning of the line again.) Type {wwwww} (five w's) and note that the cursor is now on the colon in the sentence. The lower-case w command moves you forward one word, paying attention to certain characters such as colon and period as delimiters and counting them as words themselves. Now type {0} (zero, not o 'oh'): this moves you to the beginning of the current line. Now type {5w} and notice that this has the effect of repeating {w} five times and that you are now back on the colon. Type {0} (zero) again. To ignore the delimiters and to move to the beginning of the next word using only blanks, tabs and carriage-returns (these are called white-space characters) to delimit the words, use the {W} command: upper-case W. {B} takes you back a word using white-space characters as word delimiters. Note that the commands {wbWB} do not stop at the beginning or end of a line: they will continue to the next word on the next line in the direction specified (a blank line counts as a word). If you are interested in the END of the word, and not the BEGINNING, then use the {e} and {E} commands. These commands only move forward and there are no corresponding 'reverse search' commands for the end of a word. Also, we have been using the {'} command to move the cursor to a position that we have previously marked with the {m} command. However, position the cursor in the middle of a line (any line, just pick one) and type {mk}, marking that position with the letter k. Now type a few returns {^M} and type {'k}. Observe that the cursor is now at the beginning of the line that you marked. Now try {`k}: note that this is the reverse apostrophe, or back-quote, or grave accent, or whatever you want to call it. Also note that it moves you to the character that was marked, not just to the line that was marked. In addition, the {``} command works just like the {''} command except that you are taken to the exact character, not just to the line. (I'm still not sure which exact character, just as I'm still not sure which line.) Section 21: {l} {k} {j} {h} There are several commands to move around on the screen on a character by character basis: l - moves the cursor one character to the RIGHT k - moves the cursor UP one line j - moves the cursor DOWN one line h - moves the cursor one character to the LEFT Section 22: {i} {a} {I} {A} {o} {O} ^[ (escape key) For this and following sections you will need to use the ESCAPE key on your terminal. It is usually marked ESC. Since the escape key is the same as typing {^[} we will use ^[ for the escape key. Probably the most often used command in an editor is the insert command. Below are two lines of text, the first correct, the second incorrect. Position your cursor at the beginning of Line 1 and type {z^M}. Line 1: This is an example of the insert command. Line 2: This is an of the insert command. To make line 2 look like line 1, we are going to insert the characters 'example ' before the word 'of'. So, now move the cursor so that it is positioned on the 'o' of 'of'. (You can do this by typing {^M} to move to the beginning of line 2, followed by {6w} or {wwwwww} to position the cursor on the word 'of'.) Now carefully type the following string and observe the effects: {iexample ^[} (remember: ^[ is the escape key)} The {i} begins the insert mode, and 'example ' is inserted into the line: be sure to notice the blank in 'example '. The ^[ ends insertion mode, and the line is updated to include the new string. Line 1 should look exactly like Line 2. Move the cursor to the beginning of Line 3 below and type {z^M}: Line 3: These lines are examples for the 'a' command. Line 4: These line are examples for the ' We will change line four to look like line three by using the append command. We need to append an 's' to the word 'line'. Position the cursor on the 'e' of 'line'. You can do this in several ways, one way is the following: First, type {/line /^M}. This puts us on the word 'line' in Line 4 (the blank in the search string is important!). Next, type {e}. The 'e' puts us at the end of the word. Now, type {as^[ (^[ is the escape character)}. The 'a' puts us in insert mode, AFTER the current character. We appended the 's', and the escape ^[ ended the insert mode. The difference between {i} (insert) and {a} (append) is that {i} begins inserting text BEFORE the cursor, and {a} begins inserting AFTER the cursor. Now type {Aa' command.^[}. The cursor is moved to the end of the line and the string following {A} is inserted into the text. Line 4 should now look like line 3. Just as {A} moves you to the end of the line to begin inserting, {I} would begin inserting at the FRONT of the line. To begin the insertion of a line after the cursor line, type {o}. To insert a line before the cursor line, type {O}. In other words {o123^[} is equivalent to {A^M123^[}, and {O123^[} is equivalent to {I123^M^[}. The text after the {o} or {O} is ended with an escape ^[. This paragraph contains information that is terminal dependent: you will just have to experiment to discover what your terminal does. Once in the insert mode, if you make a mistake in the typing, ^H will delete the previous character up to the beginning of the current insertion. ^W will delete the previous word, and one of ^U, @, or ^X will delete the current line (up to the beginning of the current insertion). You will need to experiment with ^U, @, and ^X to determine which works for your terminal. Section 23: {f} {x} {X} {w} {l} {r} {R} {s} {S} {J} Position the cursor at the beginning of line 5 and {z^M}: Line 5: The line as it should be. Line 6: The line as it shouldn't be. To make Line 6 like Line 5, we have to delete the 'n', the apostrophe, and the 't'. There are several ways to position ourselves at the 'n'. Choose whichever one suits your fancy: {/n't/^M} {^M7w6l} or {^M7w6 } (note the space) {^M3fn} (finds the 3rd 'n' on the line) Now {xxx} will delete the three characters, as will {3x}. Note that {X} deletes the character just BEFORE the cursor, as opposed to the character AT the cursor. Position the cursor at line 7 and {z^M}: Line 7: The line as it would be. Line 8: The line as it could be. To change line 8 into line 7 we need to change the 'c' in 'could' into a 'w'. The 'r' (replace) command was designed for this. Typing {rc} is the same as typing {xic^[} (i.e. delete the 'bad' character and insert the correct new character). Therefore, assuming that you have positioned the cursor on the 'c' of 'could', the easiest way to change 'could' into 'would' is {rw}. If you would like to now change the 'would' into 'should', use the substitute command, 's': {ssh^[}. The difference between 'r' and 's' is that 'r' (replace) replaces the current character with another character, while 's' (substitute) substitutes the current character with a string, ended with an escape. The capital letter version of replace {R} replaces each character by a character one at a time until you type an escape, ^[. The 'S' command substitutes the whole line. Position your cursor at the beginning of line 9 and {z^M}. Line 9: Love is a many splendored thing. Line 10: Love is a most splendored thing. To change line 10 into line 9, position the cursor at the beginning of 'most', and type {Rmany^[}. You may have noticed that, when inserting text, a new line is formed by typing {^M}. When changing, replacing, or substituting text you can make a new line by typing {^M}. However, neither {x} nor {X} will remove ^M to make two lines into one line. To do this, position the cursor on the first of the two lines you wish to make into a single line and type {J} (uppercase J for 'Join'). Section 24: {u} {U} Finally, before we review, let's look at the undo command. Position your cursor on line 11 below and {z^M}. Line 11: The quick brown fox jumped over the lazy hound dog. Line 12: the qwick black dog dumped over the laxy poune fox. Type the following set of commands, and observe carefully the effect of each of the commands: {/^Line 12:/^M} {ft} {rT} {fw} {ru} {w} {Rbrown fox^[} {w} {rj} {fx} {rz} {w} {Rhound dog^[} Line 12 now matches line 11. Now type {U} - capital 'U'. And line 12 now looks like it did before you typed in the command strings. Now type: {ft} {rT} {fw} {ru} {^M} {^M} and then type {u}: the cursor jumps back to the line containing the second change you made and 'undoes' it. That is, {U} 'undoes' all the changes on the line, and {u} 'undoes' only the last change. Type {u} several times and observe what happens: {u} can undo a previous {u}! Caveat: {U} only works as long as the cursor is still on the line. Move the cursor off the line and {U} will have no effect, except to possibly beep at you. However, {u} will undo the last change, no matter where it occurred. Section 25: review At this point, you have all the commands you need in order to make use of vi. The remainder of this tutorial will discuss variations on these commands as well as introduce new commands that make the job of editing more efficient. Here is a brief review of the basic commands we have covered. They are listed in the order of increasing complexity and/or decreasing necessity (to say that a command is less necessary is not to say that it is less useful!). These commands allow you to comfortably edit any text file. There are other commands that will make life easier but will require extra time to learn, obviously. You may want to consider setting this tutorial aside for several weeks and returning to it later after gaining experience with vi and getting comfortable with it. The convenience of some of the more exotic commands may then be apparent and worth the extra investment of time and effort required to master them. to get into the editor from Unix: {vi filename} to exit the editor saving all changes {ZZ} or {:wq^M} throwing away all changes {:q!^M} when no changes have been made {:q^M} save a file without exiting the editor {:w^M} write the file into another file {:w filename^M} insert text before the cursor {i ...text... ^[} at the beginning of the line {I ...text... ^[} after the cursor (append) {a ...text... ^[} at the end of the line {A ...text... ^[} after the current line {o ...text... ^[} before the current line {O ...text... ^[} delete the character ... under the cursor {x} to the left of the cursor {X} delete n characters {nx} or {nX} (for n a number) make two lines into one line (Join) {J} find a string in the file ... searching forward {/ ...string... /^M} searching backwards {? ...string... ?^M} repeat the last search command {n} repeat the last search command in the opposite direction {N} find the character c on this line ... searching forward {fc} searching backward {Fc} repeat the last 'find character' command {;} replace a character with character x {rx} substitute a single character with text {s ...text... ^[} substitute n characters with text {ns ...text... ^[} replace characters one-by-one with text {R ...text... ^[} undo all changes to the current line {U} undo the last single change {u} move forward in the file a "screenful" {^F} move back in the file a "screenful" {^B} move forward in the file one line {^M} or {+} move backward in the file one line {-} move to the beginning of the line {0} move to the end of the line {$} move forward one word {w} move forward one word, ignoring punctuation {W} move forward to the end of the next word {e} to the end of the word, ignoring punctuation{E} move backward one word {b} move back one word, ignoring punctuation {B} return to the last line modified {''} scroll a line onto the top of the screen {^Y} scroll a line onto the bottom of the screen {^E} move "up" in the file a half-screen {^U} move "down" in the file a half-screen {^D} move the cursor to the top screen line {H} move the cursor to the bottom screen line {L} move the cursor to the middle line {M} move LEFT one character position {h} or {^H} move RIGHT one character position {l} or { } move UP in the same column {k} or {^P} move DOWN in the same column {j} or {^N} mark the current position, name it x {mx} move to the line marked/named x {'x} move to the character position named x {`x} move to the beginning of the file {1G} move to the end of the file {G} move to line 23 in the file {23G} repaint the screen with the cursor line at the top of the screen {z^M} in the middle of the screen {z.} at the bottom of the screen {z-} More information on vi can be found in the file vi.advanced, which you can peruse at your leisure. From UNIX, type {vi.tut advanced^M}. vigor-0.016.orig/docs/tutorial/vi.tut.csh0100755000076400007640000000072407103707245017024 0ustar cjw44cjw44#!/bin/csh -f # # This makes the user's EXINIT variable set to the 'correct' things. # I don't know what will happen if they also have a .exrc file! # # XXX # Make sure that user is using a 24 line window!!! # if ($1 != "beginner" && $1 != "advanced") then echo Usage: $0 beginner or $0 advanced exit endif if ($?EXINIT) then set oexinit="$EXINIT" setenv EXINIT 'se ts=4 wm=8 sw=4' endif vi vi.{$1} onintr: if ($?oexinit) then setenv EXINIT "$oexinit" endif vigor-0.016.orig/docs/spell.ok0100644000076400007640000000216307103707245014677 0ustar cjw44cjw44API's Amiga Amir Bostic CFLAGS CR CTYPE Cscope Ctags DB DPURIFY Darren Ds Dw EXINIT Englar FreeBSD GDB Hiebert Kirkendall LC LN Linux Lite MSDOS Makefile Mayoff NEXINIT NVI NetBSD Neville Nvi Nvi's OS POSIX POSIX.2 Perl PostScript README Roff Solaris SunOS Sven Tcl Tk Todo USD USD.doc USD:14 USD:15 USD:16 UUNET UX Verdoolaege Vi Vi's WindowsNT ags al american api autowrite berkeley bitstring bitstring.h bostic bsd bugs.current ccil changelog cl clib cont cs cs.berkeley.edu cscope csh cshrc ctags darren db dbopen devel doc docs edu elvis email enum escapetime esr execl exrc exref fcntl filesystem free's ftp.cs.berkeley.edu gdb gdb.script gvr gz gzip'd hardtabs hiwaay html http ic iclower ignorecase il init init.tcl iso isprint kB keystrokes ksh lang ld lt lu mmap ncurses nex nexrc nul's nvi nvi's nvi.ALPHA.tar.gz nvi.tar.Z nvi.tar.gz openmode org perl preformatted ps queue.h readonly recover.script redistributable regex remapped setenv settable shiftwidth sirsi slowopen sourced struct sunsite svi tcl tclapi terminfo tk tknvi txt ucb unc uunet version's vi vi's vi.man vi.ref vi.ref.ps vi.ref.txt vitut writeable www xaw ynq vigor-0.016.orig/docs/TODO0100644000076400007640000001227407103707245013721 0ustar cjw44cjw44CL: In single-line screens, have to press 'q' twice when quitting out of a ":set all" display. COMMON: There's a serious problem with error returns -- we need to separate command failure from fatal error, consistently, over the entire source tree. We need to rework all of vi to have three return values: 0: success 1: vi error, continue 2: fatal error, die Right now we don't recognize fatal errors for what they are. VI: Change the screen scrolling to not eat user characters... i.e. g/pattern/foo should not eat already entered chars. COMMON: It's known that it's possible to sync the backing files in the wrong manner, leaving backup files that aren't recoverable. This is going to be left alone until we have a logging version of DB, which will hopefully fix this (or at least make it possible to easily do so). COMMON: The complete list of POSIX.1 calls that can return EINTR are: wait, waitpid, sleep, dup2, close, read, write, fcntl(SETLCKW) tcsetattr, tcdrain The problem is that technically, any system/library call can return EINTR, so, while nvi blocks (most of?) the obvious ones, someone may have to do a complete pass and block signals everywhere. COMMON: The vi main command loop should use the general-purpose overflow and underflow routines. In addition, the vi command loop uses unsigned longs -- should probably be fixed as a 32-bit unsigned type, and then check to make sure it's never used as as variable type again. DB: When nvi edits files that don't have trailing newlines, it appends one, regardless. This is required, by default, from POSIX.2. COMMON: Open mode is not yet implemented. COMMON: ^C isn't passed to the shell in the script windows as an interrupt character. COMMON: The options: hardtabs, lisp, optimize, redraw, slowopen are recognized, but not implemented. These options are unlikely to be implemented, so if you want them you might want to say something! I will implement lisp if anyone ever documents how it worked. COMMON: If you run out of space in the recovery directory, the recovery file is left in place. COMMON: Should "view" set a lock on the file? COMMON: Field editing shouldn't be hard to add to nvi: Field editing file template: version # field # row/column start row/column stop label field # Label string re field # Matching re string. field # row/column start row/column stop label field # Label string re field # Matching re string. moves to the next field in column 0 moves to the previous field COMMON: Let's rethink using an IPC mechanism: Two way channel, with events passing in both directions. Load into the same address space (else, how do file permissions) forks in v_init -- screens get events from vi, vi gets events queued up from screens. Vi: E_CHARACTER, /* Input character: e_c set. */ E_EOF, /* End of input (NOT ^D). */ E_ERR, /* Input error. */ E_INTERRUPT, /* Interrupt. */ E_REPAINT, /* Repaint: e_flno, e_tlno set. */ E_RESIZE, /* SIGWINCH: e_lno, e_cno set. */ E_SIGCONT, /* SIGCONT arrived. */ E_SIGFATAL, /* fatal signal arrived. E_START, /* Start ex/vi. */ E_STOP, /* Stop ex/vi. */ E_STRING, /* Input string: e_csp, e_len set. */ Screen: E_ADDSTR /* Add a string to the screen. */ E_ATTRIBUTE /* Screen attribute. */ E_BELL /* Beep/bell/flash the terminal. */ E_BUSY /* Display a busy message. */ E_CANONICAL /* Enter tty canonical mode. */ E_CLRTOEOL /* Clear to the end of the line. */ E_CURSOR /* Return the cursor location. */ E_DELETELN /* Delete a line. */ E_DISCARD /* Discard a screen. */ E_EXADJUST /* Ex: screen adjustment routine. */ E_FMAP /* Set a function key. */ E_GETKEY /* Get a key event. */ E_INSERTLN /* Insert a line. */ E_MOVE /* Move the cursor. */ E_MESSAGE /* Message or ex output. */ E_REFRESH /* Refresh the screen. */ E_RESIZE /* Resize two screens. */ E_SPLIT /* Split the screen. */ E_SUSPEND /* Suspend the editor. */ EX: It would be nice to inverse video the replaced text during interactive substitute. EX: The :args command should put the current file name out in reverse video. This isn't going to be easy, currently only full lines can be in reverse video, not just parts. TK: We currently permit the user to change the lines, columns and term edit options. Shouldn't that be illegal in tknvi? VI: The strings found by searches should be highlighted until the next character is entered. VI: Display a split vi screen for the :help command. VI: When getting a key for a continue screen, we should always read from the terminal, not from a mapped key. VI: The sentence, paragraph and section movement commands don't match historic practice in some boundary cases. This should be left alone until POSIX 1003.2 makes up its mind. VI: The vs_sm_fill routine should scroll if possible, not always redraw. VI: Think about setting a dirty/inuse bits on the lines of the SMAP structure. That way the message routines could steal lines and refresh would continue to work, because it would know not to touch the lines that were in use. vigor-0.016.orig/docs/help0100644000076400007640000002000507103707245014073 0ustar cjw44cjw44MOVING THE CURSOR: k - cursor up ^F - page forward / - search forward j - cursor down ^B - page backward ? - search backward h - cursor left w - move forward a "word" n - repeat the last search l - cursor right b - move backward a "word" ENTERING TEXT: a - append after the cursor. Use the key to return to i - insert before the cursor. command mode. o - open a new line below the cursor. O - open new line above the cursor. WRITING AND EXITING: :w - write the file :q - exit the file :q! - exit without writing the file :# - move to a line (e.g., :35 moves to line 35) MISCELLANEOUS: ^G - display the file name J - join two lines (use i to split a line) u - undo the last change (enter . after a 'u' to undo more than one change) =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= VI COMMANDS: ^A search forward for cursor word ^B scroll up by screens ^C interrupt an operation (e.g. read, write, search) ^D scroll down by half screens (setting count) ^E scroll down by lines ^F scroll down by screens ^G file status ^H move left by characters ^J move down by lines ^L redraw screen ^M move down by lines (to first non-blank) ^N move down by lines ^P move up by lines ^R redraw screen ^T tag pop ^U half page up (set count) ^V input a literal character ^W move to next screen ^Y page up by lines ^Z suspend editor ^[ exit input mode, cancel partial commands ^\ switch to ex mode ^] tag push cursor word ^^ switch to previous file move right by columns ! filter through command(s) to motion # number increment/decrement $ move to last column % move to match & repeat substitution ' move to mark (to first non-blank) ( move back sentence ) move forward sentence + move down by lines (to first non-blank) , reverse last F, f, T or t search - move up by lines (to first non-blank) . repeat the last command / search forward 0 move to first character : ex command ; repeat last F, f, T or t search < shift lines left to motion > shift lines right to motion ? search backward @ execute buffer A append to the line B move back bigword C change to end-of-line D delete to end-of-line E move to end of bigword F character in line backward search G move to line H move to count lines from screen top I insert before first nonblank J join lines L move to screen bottom M move to screen middle N reverse last search O insert above line P insert before cursor from buffer Q switch to ex mode R replace characters S substitute for the line(s) T before character in line backward search U Restore the current line W move to next bigword X delete character before cursor Y copy line ZZ save file and exit [[ move back section ]] move forward section ^ move to first non-blank _ move to first non-blank ` move to mark a append after cursor b move back word c change to motion d delete to motion e move to end of word f character in line forward search h move left by columns i insert before cursor j move down by lines k move up by lines l move right by columns m set mark n repeat last search o append after line p insert after cursor from buffer r replace character s substitute character t before character in line forward search u undo last change w move to next word x delete character y copy text to motion into a cut buffer z reposition the screen { move back paragraph | move to column } move forward paragraph ~ reverse case =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= EX COMMANDS: ^D: scroll lines !: filter lines through commands or run commands #: display numbered lines &: repeat the last subsitution *: execute a buffer <: shift lines left =: display line number >: shift lines right @: execute a buffer append: append input to a line abbreviate: specify an input abbreviation args: display file argument list bg: background the current screen change: change lines to input cd: change the current directory chdir: change the current directory copy: copy lines elsewhere in the file cscope: create a set of tags using a cscope command delete: delete lines from the file display: display buffers, screens or tags [Ee]dit: begin editing another file [Ee]x: begin editing another file exusage: display ex command usage statement file: display (and optionally set) file name fg: switch the current screen and a backgrounded screen global: execute a global command on lines matching an RE help: display help statement insert: insert input before a line join: join lines into a single line k: mark a line position list: display lines in an unambiguous form move: move lines elsewhere in the file mark: mark a line position map: map input or commands to one or more keys mkexrc: write a .exrc file [Nn]ext: edit (and optionally specify) the next file number: change display to number lines open: enter "open" mode (not implemented) print: display lines perl: run the perl interpreter with the command perldo: run the perl interpreter with the command, on each line preserve: preserve an edit session for recovery [Pp]revious: edit the previous file in the file argument list put: append a cut buffer to the line quit: exit ex/vi read: append input from a command or file to the line recover: recover a saved file resize: grow or shrink the current screen rewind: re-edit all the files in the file argument list s: substitute on lines matching an RE script: run a shell in a screen set: set options (use ":set all" to see all options) shell: suspend editing and run a shell source: read a file of ex commands stop: suspend the edit session suspend: suspend the edit session t: copy lines elsewhere in the file [Tt]ag: edit the file containing the tag tagnext: move to the next tag tagpop: return to the previous group of tags tagprev: move to the previous tag tagtop: discard all tags tcl: run the tcl interpreter with the command undo: undo the most recent change unabbreviate: delete an abbreviation unmap: delete an input or command map v: execute a global command on lines NOT matching an RE version: display the program version information visual: enter visual (vi) mode from ex mode [Vv]isual: edit another file (from vi mode only) viusage: display vi key usage statement write: write the file wn: write the file and switch to the next file wq: write the file and exit xit: exit yank: copy lines to a cut buffer z: display different screens of the file ~: replace previous RE with previous replacement string, =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Edit options: noaltwerase filec="" nomodeline scroll=17 notildeop autoindent flash msgcat="./" nosearchincr timeout autoprint hardtabs=0 noprint="" nosecure nottywerase noautowrite noiclower nonumber shiftwidth=8 noverbose backup="" noignorecase nooctal noshowmatch warn nobeautify keytime=6 open noshowmode window=35 cedit="" noleftright optimize sidescroll=16 nowindowname columns=80 lines=36 print="" noslowopen wraplen=0 comment nolisp prompt nosourceany wrapmargin=0 noedcompatible nolist readonly tabstop=8 wrapscan escapetime=1 lock noredraw taglength=0 nowriteany noerrorbells magic remap tags="tags" exrc matchtime=7 report=5 term="xterm" noextended mesg ruler noterse cdpath="/usr/src/local/nvi:/tmp" directory="/tmp" paragraphs="IPLPPPQPP LIpplpipbp" recdir="/var/tmp/vi.recover" sections="NHSHH HUnhsh" shell="/bin/csh" shellmeta="~{[*?$`'"\" vigor-0.016.orig/docs/features0100644000076400007640000000741507103707245014773 0ustar cjw44cjw44List of things that should be added: =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= + X11 (Tk, Motif, Xaw) interface. + Interpreted language (Perl, Scheme, Tcl/Rush, Python) + Additional ports: Windows, Windows NT, MSDOS + Forms editing package; use RE's to verify field contents. + Internationalization, including wide character and multibyte support. + Support for single line window editing, including full editing capability on the vi colon command line. + Rob Pike's sam style RE's. + Right-to-left and bottom to top text support. + Quitall command, to leave all windows. A ! will force the quit. List of suggested features: =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= + It would be nice to have the completion mechanism found in tcsh versions >= 6.03. For instance, the completion for the `:cd' command will be directories only. The completion for the `:set' command will be all options not set at that moment, and for `:set un' will be all options that are set at that moment. The completion for `:< count' will be the flags. + Add an command-line option to initially split the screen based on the number of file arguments, e.g., "nvi -a file1 file2" would initialize a two edit-buffer display. + Add a "push" command that would push a file on the tags stack. (Essentially make tags a special case of the stack, and make the stack more general purpose.) + Make :script just run a command and edit the output, and :interactive, which allows interactive shell session, instead of just the current :script. + Add tagging information to the man page so that users can display the part of the man page that discusses the command in which they're interested. + Add a zone option so that you can declare that top/bottom few lines of the screen aren't filled except by accident, so that the text you ask for is always concentrated in the center of the screen. + Change :di[splay] tags -> :tags :di[splay] screens -> :screens :di[splay] buffers -> :buffers + A macro record function. Add the ability to record a sequence of keystrokes into a named buffer for later use. Handy when you're trying to build a semi-complex macro. + The semantics of :split, :bg, and :fg aren't right. Someone needs to rethink how they should interact. The main problem arises when users want to get a window into a new file. Currently, the necessary sequence is ":split newfile|^W|:bg". It would be nice if you could simply background the current screen and edit a new one. + An option to turn on a ``quarter plane'' model so that you can go as far to the right or down as you wish. The File or the current line is only extended if you actually put down a char at the new location. Very handy for ascii graphics and tables. + Some way of replacing the command bindings. For this to work cleanly the notion of a command must be separate from that of a key. (Simulate the Rand editor?) + Vertical splitting, so you can see files side by side. + Tracking. Two or more files are associated so that when one file is scrolled up/down/left/right other files track by the same amount. Tracking may be constrained such that two files only track vertically or horizontally. This is relatively easy to implement. + A status file so that the next time invocation of the editor returns to the same place, with the same number of windows etc. In case of change of the screen size, reasonable defaults are used. For each window size and location of the window, name of the file and position in it, any tab settings, any other settings for the window (such as insert/overwrite mode, auto indent etc). Last search RE and maybe direction. If a file does not exist the next time you invoke the editor, its window is left in the same place but with some default message. vigor-0.016.orig/docs/changelog0100644000076400007640000016460507103707245015111 0ustar cjw44cjw441.78 -> 1.79 (10/23/96) + Rename delete() to del(), for C++. + Add Spanish to the list of translations. + Update to Perl 5.003_06, and other Perl interpreter updates. + Update the set-edit-option interface for the scripting languages. + Rework ex command parsing to match historic practice for backslash escaped characters inside of global commands. + Enhance the comment edit option to skip C++ comments. + Change installation to configure the recovery shell script to match the system pathnames and to install it into the vi data directory. Move the recover script into the build directory, and delete the recover directory. + Enhance LynxOS support. 1.76 -> 1.78 (10/01/96) + Fix bugs when both the leftright scrolling and number edit options were on. + Fix bug where splitting in the middle of the screen could repaint incorrectly. + Fix first-nul in input bug, where random garbage was inserted. + Correct search and mark-as-motion-command bug, it's a line mode action if the search starts at or before the first non. + Fix bug autoindent bug, where ^D could shift too far in the line. + Fix core dump where ! command called from the .exrc file. + Add the -S command-line option, which initializes vi to have the secure edit option preset. 1.75 -> 1.76 (09/15/96) + Fix bug where ^V didn't keep input mapping from happening. + Fix a core dump bug in the R command. + Give up on licensing: no more shareware, adware, whatever. + Fix cursor positioning bug for C, S and c$ in an empty file. 1.74 -> 1.75 (08/22/96) + Add French to the error message translations. + Move the UNLICENSED message to the end of the message line. + Fix bug where wide characters in a file name weren't calculated correctly in the status message. + Fix bug where cl_rename was called directly, by the ex shell code. + Fix bug where splitting a screen resulting in a new screen at the top of the display resulted in badly displayed status messages. 1.73 -> 1.74 (08/18/96) + Fix bug where the status line wasn't redisplayed if the user ran an ex command that trashed the screen. + Fix bug where the long version of the status line wasn't displayed when switching screens. + Rework fast-path filename completion code to sort the entries, and strip out . and .. by default. + Fix bug where ex went to the first line instead of the last one when reading in a file. 1.72 -> 1.73 (08/12/96) + Do filename completion and some file expansion internally for speed. + Fix CSCOPE_DIRS environmental variable support. + Ex parser fix for global commands in script files. + Add the O_PATH option, so you can specify a directory search path for files. + Make it possible to specify the database file to cscope, allowing multiple databases in a single directory. + Fix incremental search to overwrite erased characters so the user can tell where they are on the colon-command line. + Fix incremental search to restart the search if the user enters an unescaped shell meta character. 1.71 -> 1.72 (07/12/96) + Cscope fix: test for files newer than the database was reversed. + Display "files to edit" message for rewind, next and initial screen. + Fix a bug in the R command where it could fail if the user extended the file. + Fix a bug where text abbreviations could corrupt the line. + Fix a bug where the windowname edit option couldn't be set before a file was loaded into the edit buffer. + Fix a bug where the system .exrc values weren't being overridden by the user's $HOME .exrc values. + Fix a bug in the filename completion code, where garbage characters could be added to the colon command line. + Fix bug where multiple edit sessions on a non-existent file could all write the file without warning. + Fix bug where screen update was incorrect if a character triggered both a wrapmargin and showmatch condition. + Fix bug in leftright scrolling where during text input didn't return the cursor to the left margin. + Rev the Perl interpreter code, new version from Sven Verdoolaege, based on Perl 5.003.01. + Fix bug in tags file pattern search introduced in 1.71. 1.70 -> 1.71 (07/01/96) + Don't include -- neither HPUX or Solaris can cope with it. + Fix bug where ^M's in the original pattern were converted into new lines in the file during substitution commands. + Make window resize events separate from interrupts -- too many users complained. + Fix bug in first-character-is-null text input semantic. + Rework search routines to take a length instead of a nul-terminated string for a pattern. This fixes a couple of bugs in searching, but probably introduces new ones. + Fix prompting the user after a write filter command, the way I did it in 1.70 broke the display. + Don't switch to the alternate xterm screen when entering the ex text input commands from vi mode. + Implement the Fg command, so can foreground a background screen into a split screen. + Change the fg command to match screen names using the last component of the filename the full filename fails. 1.69 -> 1.70 (06/28/96) + Change the ex read command to support named pipes. + Copy the EXINIT/NEXINIT strings before executing their commands so we don't step on the process environment. + Don't do "line modification" reports for intermediate commands executed from the vi colon command line, it screws up filter reads, causing nvi to prompt for the user to continue. + Add "smd" as an abbreviation for showmode: HP, ICL and SCO have it. + Change nvi to always prompt the user after a write filter command. This matches historic practice. + Fix recovery information mailed to the user to reflect the program's installed name. + Change configuration script to not cache option information, e.g., --disable-curses. + Fix a bug where the second character of the vi [[, ]] and ZZ commands could start a command mapped sequence. + Fix 3 write bugs: partial writes (3,$write), were clearing the modified flag, full writes using line numbers (1,$write) were not, and append historically never cleared the modified flag, and we didn't get that right. + Shorten the "more files to edit" message so it can gang on a single line, lots of people have complained. Add the number of files that are left to edit, it's historic practice. + Fix core dump where message catalogs collided with truncating the write path. Add a new write message so the string "appended" is taken from a message catalog. + Fix bug where an undo followed by '.' to repeat it wouldn't work if no other repeatable commands had been entered. + Fix core dump when resolution of input lines' autoindent characters invalidated cached display information. + Set the name of the X11 xterm icon/window to "xterm" when exiting, if modified based on the windowname option. + Include if it exists, fixes portability problems on IRIX systems. 1.68 -> 1.69 (06/17/96) + Add the windowname edit option and code to change the icon/window name for xterm's. + Enhance the comment edit option to skip shell comments. + Add conditional prototypes to replacement C library functions. + Minor enhancements/reworking to Makefile.in, other build files. + Fix bug in vi text input ^D processing, could result in cursor warp to the beginning of the line. + Fix leftright screen bug where the screen wasn't repainted when being repainted from scratch. + Update the Swedish and Dutch catalogs. + Truncate paths in write commands if they don't fit on one line. + Fix alternate screen bug where the screen flashed and output lost when switching to/from the X11 xterm alternate screen. Fix bug where nvi switched into the alternate screen during filter-read commands, which doesn't match historic practice. + Minor relative cursor positioning change, make cursor position changes from ex real and permanent. 1.67 -> 1.68 (06/09/96) + Fix core dump when tagging out of a modified file. 1.66 -> 1.67 (06/09/96) + Convert the license to adware. + Leftright scrolling tweak, don't repaint the screen as often. + Change so that search warning/error messages don't appear during an incremental search. + Cscope fix: test for files newer than the database was reversed. + Don't display ex `welcome message' if in ex batch mode. + Test for vsnprintf and snprintf separately, HP 10.10 has snprintf but not vsnprintf. + Reverse lookup order between LC_MESSAGES and LANG. + Fix Tcl/Perl core dumps in common API code to get/set options. + Fix R command -- it used a DB pinned page after discarding it. + Minor fixes in multiple edit buffer message handling code. + Fix yk command moving to shorter line core dump. + Rework message handling to try and gang more messages onto a single line. 1.65 -> 1.66 (05/18/96) + Convert vi man page to historic -man macro package, and install it. + Fix bug were !! on an empty line with a nonexistent command left the cursor on the second character, not the first. + Fix bug where line redisplay was wrong when a replaced a previous in the line. + Fix bug where D (d$) didn't reset the relative cursor position. + Fix bug where yG incorrectly reset the relative cursor position. + Fix bug where the window size couldn't be grown once it was shrunk. + Fix bug where the extended edit option caused tag searches to fail. + If multiple lines in the tags file with the same leading tag, build a tags stack like the Cscope stack. This is the obvious extension, and the way that Larry McVoy's ctags program works. + Send the appropriate TI/TE sequence in the curses screen whenever entering ex/vi mode. This means that :shell now shows the correct screen when using xterm alternate screens. + Rework the options display code to get five columns in an 80 column screen. + Interactive Unix V3.0 port -- mostly file name shortening, other minor changes. Only preliminary, more work will be necessary. + Add debugging option to not read EXINIT/.exrc information. + Fix bug where re_compile printed an error message to the screen when the user entered [ to an incremental search. + Turn off screen beeps when incremental search is failing. + Fix bug where the iclower option didn't trigger an RE recompilation. + Fix bug where -t into an already locked file forced the user to wait as if a startup command had failed. + LynxOS port -- mostly adding even though was already included. + Fix ex output bug, where it appeared as if an ex command was skipped due to flags not being cleared in the vs_msg() routine. + Fix core dump when global command tried to switch screens. 1.64 -> 1.65 (05/13/96) + Fix cscope -matching pattern to use extended RE's, and bug that kept cscope from finding patterns containing s. + Fix core dumps in both leftright and folded screens when tabstops edit option value was large, and tab characters occurred as the last character in the logical screen. + Fix core dump where the second screen of a folded line wasn't displayed correctly. + Fix incremental search to match the current location for strings starting with \< patterns. + Fix bug where margins were ignored during replay of text input. + Fix bug where motion components to shorter lines could lose because the relative motion flags weren't ever set. This has been broken forever, but the change almost certainly breaks something else -- I have no idea what. + Tags display: don't print the current entry separately, display them all and add a trailing asterisk for the current one. + Change the cscope add command to put the directory name through standard file name expansion. + Fix cscope use of buffers -- search commands weren't nul-terminated. 1.63 -> 1.64 (05/08/96) + Add installation target to the Makefile. + Add documentation on the new tags commands to the Vi Reference Manual. + Make the sidescroll edit option work again. + Fix bug where messages output during startup by ex could be lost. + Change ex/vi commands errors into beeps, unless the verbose edit option is set -- there are too many macros that are expected to eventually fail. This matches historic practice. + Truncate paths in initial vi screen if they won't fit on one line. + Make cursor position after filter write match historic practice. + Force the user to wait if there is output and the user is leaving the screen for any reason -- don't permit further ex commands. + Don't use a character to scroll the screen when exiting, scroll in the vi screen before endwin() is called. + Fix bug where the column number could be incorrect because the old screen wasn't updated after a screen split. + Fix ex print routine to correctly specify print flags. + Make -g/-O a separate make/configuration option. + Fix bug where ex/vi messages weren't being joined. + Fix bug where termcap strings were free'd twice. + Fix bug where TI/TE still weren't working -- I didn't put in the translation strings for BSD style curses. + Fix bug where I misspelled the iclower edit option as icloser. 1.62 -> 1.63 (04/29/96) + Robustness and type/lint fixes for the Tcl interface code. + Fix core dump if TERM wasn't set or terminal type was unknown. + Fix bug where combining ex commands that did/did not require an ex screen would overwrite the command with the want-to-continue messsage. + Fix bug where the screen was never resolved if the user continued entering ex commands using the : character, but then backspaced over the prompt to quit or tried to edit their colon command-line history. + Fix bug where cursor wasn't placed over the ^ placeholder character when quoting using the literal-next character. + Fix bug where nvi under BSD style curses wasn't sending TI/TE termcap strings when suspending the process. + Rename mic again, to iclower. + Fix bug where 'z' commands trailing / or ? commands weren't being executed. + Change incremental search to leave the cursor at its last position when searching for something that was never found. + Fix bug where search-with-confirmation from vi mode didn't position the cursor correctly after displaying the confirm message. + Fix bug where the "search wrapped" message was dependent on the verbose edit option, which doesn't match historic practice. Change search messages to be in inverse video. + Fix bug where matched showmatch character wasn't being displayed before the matching character was displayed. + Another cursor update bug required a change to vs_paint(). + Fix bug were initial line offset was wrong for the first split screen (symptom is very strange column numbers and blank first line). + Create filename "argument" lists when creating new screens. + Fix bug where globals with associated commands that included both buffer execution and other commands could fail to execute the latter. 1.61 -> 1.62 (04/22/96) + Rename the "searchci" edit option to be "mic". + Fix memory corruption in global commands ending in searches. + Fix text resolution bug, corrected the cursor based on the first line input, not the last. + Rework the readonly edit option to match historic practice. + Fix several minor incremental search bugs; make incremental searches work in maps. + Fix long-line core dump, where an incorrect screen map could be used. 1.60 -> 1.61 (04/12/96) + The cursor now ends up on the FIRST character of the put text for all versions of the vi put commands, regardless of the source of the text. This matches System III/V behavior and POSIX 1003.2. + Fixed bug where showmatch messages were getting discarded. + Minor Perl integration fixes. + Integrate Cscope into the tags stack code -- major change. + Fixed bug where ^T would drop core if returning to a temporary file. + Changed vs_ routine to display ex output to replace tab characters with spaces. + Fix autoindent code to not back up past beginning of line when ^T inserted into the middle of a line, i.e. offset != 0. + Fix "notimeout" option, was being ignored, by a coding error. + Fix showmatch code to never flash on a match if keys are waiting. + Change the vi 'D' command to ignore any supplied count, matching historic practice. + Fix viusage for D, S, C and Y (the aliased vi commands). + Fix the Perl5 configuration bug in the configuration script. + Make file completion commands in empty lines work. + Fix where the change to let vi use the default ex command structure broke the ex specification of the script or source file name. + Fix to free saved RE structures when screens exit. This is a major RE change, which fixed several bugs in the handling of saved/subst RE's. It's likely to have added new bugs, however. + Add case-independent searching (the searchci edit option). + Add incremental search (the searchincr edit option). + Home the cursor when executing ex commands from vi. 1.59 -> 1.60 (03/29/96) + Fix ":w >>" core dump, make that command match historic practice. + Fix autoindent bug where the length of the line was incorrectly calculated. + Fix cursor bug where cursor could end up at the wrong place if the movement keys were entered quickly enough. + Change the read/write whirling indicator to appear only every 1/4 second, clean up the appearance. + Don't change the options real values until underlying functions have returned OK -- fix "set tabstop=0" core dump. + Fix resizing on Sun's: use SA_INTERRUPT to interrupt read calls. + Fix two forward mark command bugs: one where it wasn't setting the "favorite cursor" position because of the refresh optimization, and one where it didn't have VM_RCM_SET set in the command flags for some reason. + Fix a bug were the 's' command on top of a didn't correctly copy the buffer. + Make :exusage command work for commands having optional leading capital letters, e.g. Next. + Previous changes broke the inital-matching-prefix code in the key mapping part of v_event_get -- fix it, and fix the infinite macro interrupt code at the same time. + Add "cedit" edit option, so colon command-line editing is optional. Change filec/cedit so that you can set them to the same character, and they do cedit if in column 1, and filec otherwise. + Fix "source of non-existent file" core dump. + Fix bug where functions keys specified in startup information were never resolved/activated. + Fix v_txt bug where could infinitely loop if triggered an abbreviation expansion. + Move version string into VERSION file, out of ex_version.c 1.58 -> 1.59 + Configuration changes, several minor bug fixes, including a few core dumps. No functional changes. 1.57 -> 1.58 + Fix the problem where colon command-line temporary files were getting left in /tmp. + Fix the configuration scripts to quit immediately if the Perl or Tk/Tcl libraries are specified but not found. + Several screen fixes -- the changes in 1.57 weren't as safe as I thought. More specifically, the refresh-only-if-waiting change caused a lot of problems. In general, fixing them should provide even more speedup, but I'm nervous. + Lots of changes in the configuration scripts, hopefully this is just a first-round ordeal. + Several other minor bug fixes. 1.56 -> 1.57 + Add hook to colon commands, so you can edit colon commands. + Add Perl5 interpreter. + Change shell expansion code to fail if it doesn't read at least one non-blank character from the shell. If the shell expansion process fails, or if not at least one non-blank character, it now displays an error message to the user. + Rework the screen display so that it matches the historic vi screen refreshes. + Rework options processing: print/noprint are no longer cumulative, provide more information to underlying edit options modules, move O_MESG information into the screen specific code. + Make file completion character settable. + Rework terminal restart -- you can now use ":set term" to switch terminal types. This cleaned up screen resizing considerably. + Character display fix, display \177 as ^?, not in hex/octal. + Tag search bug fix, don't repeat search if successful. + Replace sys_siglist[] use with private sigmsg() routine. + Fix core dump if illegal screenId specified to Tcl routine. + Add get/set mark interface to Tcl Interpreter interface. + Fix core dump if file expansion code stressed (re: filec edit option) + Fix bug where filter commands in empty files couldn't find line 0. + Switch to GNU autoconf 2.7 for configuration, delete nvi/PORT. Many random portability fixes. 1.55 -> 1.56 (11/26/95) + Bug fix release -- generally available beta release. 1.54 -> 1.55 (11/18/95) + Bug fix release. + Integrate Tcl interpreter. 1.53 -> 1.54 (11/11/95) + Bug fix release. A major change in reworking the ex commands, when called from the colon command line, to match historic practice, and permit them to be entered repeatedly after ex has trashed the screen. + Use restartable endwin() from System V curses to implement screen + suspend. 1.52 -> 1.53 (10/29/95) + Switch to using vendor's curses library for all ports. + Back out the event driven version, leaving screen separation. + User configuration of timeout (the escapetime edit option). + Add Tcl/Tk screen support. + Add file name completion (the filec edit option). + Disallow access to outside applications (the secure edit option). 1.51 -> 1.52 (7/26/95) + Minor cleanups, snapshotted for SMI. 1.50 -> 1.51 (7/05/95) + Lots and lots of changes for event driven model, largely in moving the boundary between the screen code and the editor up and down. Private release for Rob Zimmermann @ Tartan and Bill Shannon @ SMI. 1.49 -> 1.50 Fri Jun 9 13:56:17 1995 + Minor bug fixes for stability. + Convert to an event driven model, with the usual Nachos Supreme layering that results. This is a completely new version, nothing done previously matters any more. 1.48 -> 1.49 Wed Mar 8 10:42:17 1995 + Changes in 1.46 broke ^A processing. + Add :previous to split screen commands. + Lots o' random bug fixes -- passes purify testing again. 1.47 -> 1.48 Thu Feb 9 18:13:29 1995 + Random bug fixes for 1.47. + Move the FREF (file structure) list out of the screen and into the global area. + Change semantics to :E to more closely match :e -- ":E" joins the current file, so ":E /tmp" is now the command to match the historic ":split". 1.46 -> 1.47 Wed Feb 8 19:43:41 1995 + All ex commands (including visual and excluding global and v) are now supported inside ex global commands. + Rework the append/change/insert commands to match historic practice for text appended to the ex command line, and inside of ex global commands. + Restructure to make single-line screens work. + Restructure to create curses independent screen routines. + Restructure to permit Edit, Next, and Tag routines to create new screens on the fly. + Change hexadecimal output to be \x## instead of 0x##. + Change ex commands run from vi to stay in vi mode for as long as possible, i.e. until ex modifies the screen outside of the editor. 1.45 -> 1.46 Tue Jan 24 10:22:27 1995 + Restructure to build as a library. 1.44 -> 1.45 Thu Jan 12 21:33:06 1995 + Fix relative cursor motion to handle folded lines. + Recompile the search pattern if applicable edit options change. + Change +/-c command ordering to match historic practice. + Rework autoindent code to always resolve preceeding characters when a ^T or ^D are entered. + Add the print/noprint edit options, so can now specify if a character is printable. + Change ex to run in canonical mode. + Fix ex text input to support the number edit option. + Vi text input fix for the R command to correctly restore characters entered and then backspaced over. + Several vi increment command fixes. 1.43 -> 1.44 + Bug fix, vi was printing the last line number on the status line at startup. Change to execute commands at first line set, i.e. "vi -t tag -c cmd" executes cmd at the tag line, not EOF. 1.42 -> 1.43 Sat Dec 3 13:11:32 1994 + Marks, SunOS signed comparison fix for 1.42. 1.41 -> 1.42 Fri Dec 2 20:08:16 1994 + Make autowrite require the file not be read-only. + Make the ex insert command work in empty files. + Tab expansion is no longer limited to values < 20 (which matches historical practice). + Simplify (and fix limit detection for) the # command. It's no longer possible to use the # command itself to repeat or modify a previous # command, '.' is the only possibility. + Lots more reworking of the ex addresses, putting ? and / into the ex addressing code broke the world. + Make the Put, Preserve and Print commands work (don't ask). + Split stdout/stderr from shell expansions; stdout is expansion text, stderr is entered on the message queue. 1.40 -> 1.41 Fri Nov 18 16:13:52 1994 + Addition of a port for AUX 3.1 + Addition of a message catalog for Russian. + Make vi ? and / commands be true ex addresses (historic practice). + Display the date first in vi -r recovery list. 1.39 -> 1.40 Mon Nov 14 10:46:56 1994 + Two bug fixes for 1.39; -r option and v_change core dump. 1.38 -> 1.39 Sun Nov 13 18:04:08 1994 + Ex substitution with confirmation now matches historic practice (except that it still runs in raw mode, not cooked). + Nvi now clears the screen before painting, if repainting the entire screen. + Fix final cursor position for put command entering text in a single line. + Change to break error message lines on the last in the line. + Always center the current line when returning to a previously edited file or moving to a tag line that's not visible on the screen. + Change write of the current file using an explicit name or % to match the semantics of :w, not :w file. + Add command aliases to vi, and remap 6 historic commands to their historic counterparts: D->d$, Y->y_, S->c_, C->c$, A->$a, I->^i. + Match option display to historic practice; if boolean or numeric options changed to default values, not displayed by default. Nvi treats string options the same way, vi always displayed any string option that was changed. + Added lock edit option, if not set, no file locking is done. + Rework ex to permit any ex command in the EXINIT variable or exrc startup files. This fixes the bug were `vi +100 file' painted the screen and then moved to line 100 and repainted. (Yanked to SCCS ID 9.1.) + Bug fix: could report file modified more recently than it was written, incorrectly. + Search fix: historically, motions with deltas were not corrected to the previous/next line based on the starting/stopping column. + Addressing fixes: make trailing non-existent addresses work, change % to be text substitution, not a unique address (to follow future POSIX). 1.37 -> 1.38 Mon Oct 24 12:51:58 1994 + Scrolling fix; ^B can move to nonexistent lines. + Fix to vi mapped commands; characters while already in command mode did not historically cause the mapped characters to be flushed. + Add the backup edit option, automatically version edit files. + Make it possible to edit files that db can't read, i.e. edit a temporary file, with the correct file name. + Only anchor the last line of the file to the bottom line of the screen if there's half or less of a screen between the target line and the end of the file. + Fix wrapmargin text allocation bug. + Fix ex put command to work in any empty file. + Fix global command to handle move's to line 0 correctly. + Regularize the yank cursor motions, several bug fixes for historic practice. + Fix N and n, when used as a motion command for the ! command, repeat the last bang command instead of prompting for a new one. + Timeout maps beginning with quickly, instead of based on the keytime option. + Bug fix for wraplen option, wasn't triggered for input commands. 1.36 -> 1.37 Sun Oct 9 19:02:53 1994 + Change PORT directories to install patches before distribution. + Fix ^A to set search direction and pattern for consistency. + Fold the showdirty option into the showmode option. + Ex addressing fix: change search offset and line arguments (e.g. the copy command) to be ex addressing offsets, matching historic practice. + Ex addressing fix: support ^ as an offset/flag equivalent to -. + Ex addressing fix: historically, any missing address defaulted to dot, e.g. "4,,," was the same as ".,.". + Ex addressing fix: historically, separated numbers were additive, e.g. "3 5p" displayed line 8. + Ex addressing fix: make ';' as a range delimiter match historic practice. + Change nvi to exit immediately if stdout isn't a terminal. + Change alternate file name behavior to match historic practice, make the :write command set the current file name. + Text input fix; input keys from a map, with an associated count, weren't historically affected by the wrapmargin value. + Add wraplen option, same as wrapmargin, but from the left-hand column, not the right. + Make ex address . be equivalent to .+, i.e. the '+' is understood; matches historic practice, and it's widely documented for ed(1). + Input mode ^V^J historically mapped into a single ^J. + Minor catalog changes, fixes; don't use 's' to pluralize words. 1.35 -> 1.36 Thu Sep 8 08:40:25 1994 + Don't overwrite user's maps with standard (termcap) mappings. + Make \ escape kill and erase characters in vi text input mode. + Fix ^D autoindent bug by resolving leading s at ^D. + Rework abbreviation tests (again!) to match historic practice. + Change ^D/^U default scrolling value to be based on window option value, not screen lines, correct scrolling option value, both to match historic practice. NOTE: System V does this differently! 1.34 -> 1.35 Wed Aug 31 19:20:15 1994 + Add the historic -l option. + Message catalogs. + Display global messages at each flush, just in case some are there. + Fix global substitute code, `\\' wasn't handled correctly. + Fix abbreviation code to use s as the preceding character. + Fix ruler to display logical column, not physical column. + Block signals when user issues :preserve command, so no race caused by SIGHUP/SIGTERM. 1.33 -> 1.34 Wed Aug 17 14:37:32 1994 (PUBLICLY AVAILABLE VERSION) + Back out sccsid string fix, it won't work on SunOS 4.1. 1.32 -> 1.33 Wed Aug 17 09:31:41 1994 (PUBLICLY AVAILABLE VERSION) + Get back 5K of data space for the sccsid strings. + Fix bug where cG fix in version 1.31 broke cw cursor positioning when the change command extended the line. + Fix core dump in map/seq code if character larger than 7 bits. + Block signals when manipulating the SCR chains. + Fix memory allocation for machines with multiple pointer sizes. 1.31 -> 1.32 Mon Aug 15 14:27:49 1994 + Turn off recno mmap call for Solaris 2.4/SunOS 5.4. 1.30 -> 1.31 Sun Aug 14 13:13:35 1994 + Fix bug were cG on the last line of a file wasn't done in line mode, and where the cursor wasn't positioned correctly after exiting text insert mode. + Add termcap workaround to make function keys greater than 9 work correctly (or fail if old-style termcap support). + Change ex/vi to not flush mapped keys on error -- this is historic practice, and people depended on it. + Rework vi parser so that no command including a mapped key ever becomes the '.' command, matching historic practice. + Make cancellation in the vi parser match POSIX 1003.2. + Fix curses bug where standout string was written for each standout character, and where standout mode was never exited explicitly. Fix bugs in curses SF/sf and SR/sr scrolling, as seen on Sun and x86 consoles. + The v/global commands execute the print command by default. + The number option historically applies to ex as well as vi. 1.29 -> 1.30 Mon Aug 8 10:30:42 1994 + Make first read into a temporary set the file's name. + Permit any key to continue scrolling or ex commands -- this allows stacked colon commands, and matches historic practice. + Don't output normal ! command commentary in ex silent mode. + Allow +/- flags after substitute commands, make line (flag) offsets from vi mode match historic practice. + Return to ex immediately, even if preceded by spaces. Rework ex parser to do erase the prompt instead of depending on the print routines to do it. Minor fixes to the ex parser for display of default and scrolling commands. MORE EX PARSER CHANGES. 1.28 -> 1.29 Fri Aug 5 10:18:07 1994 + Make the abbreviated ex delete command work (:dele---###lll for example, is historically legal. + When autoprint fires, multiple flags may be set, use ex_print directly instead of the stub routines. + Change v/global commands to turn off autoprint while running. + Minor changes to make the ! command display match historic output. + Rework the ex parser to permit multiple command separators without commands -- MAJOR CHANGE, likely to introduce all sorts of new bugs. + Fix cd command to expand argument in the context of each element of the cdpath option, make relative paths always relative to the current directory. + Rework write/quit cases for temporary files, so that user's don't discard them accidentally. + Check for window size changes when continuing after a suspend. + Fix memory problem in svi_screen, used free'd memory. + Change the ex change, insert, append commands to match historic cursor positions if no data entered by the user. + Change ex format flags (#, l, p) to affect future commands, not just the current one, to match historic practice. + Make the user's EOF character an additional scroll character in ex. + Fix ex ^D scrolling to be the value of the scroll option, not half the screen. + Fix buffer execution to match historic practice -- bugs where the '*' command didn't work, and @ didn't work. + Fix doubled reporting of deleted lines in filters. + Rework the % ` / ? ( ) N n { and ^A commands to always cut into numeric buffers regardless of the location or length of the cut. This matches historic practice. + Fix the { command to check the current line if the cursor doesn't start on the first character of the line. + Do '!' expansion in the ex read command arguments, it's historic practice. In addition, it sets the last '!' command. 1.27 -> 1.28 Wed Jul 27 21:29:18 1994 + Add support for scrolling using the CS and SF/sf/SR/sr termcap strings to the 4BSD curses. + Rework of getkey() introduced a bug where command interrupt put nvi into an infinite loop. + Piping through a filter historically cut the replaced lines into the default buffer, although not the numeric ones. + Read of a filter and !! historically moved to the first nonblank of the resulting cursor line (most of the time). + Rework cursor motion flags, to support '!' as a motion command. 1.26 -> 1.27 Tue Jul 26 10:27:58 1994 + Add the meta option, to specify characters the shell will expand. + Fix the read command to match historic practice, the white space and bang characters weren't getting parsed correctly. + Change SIGALRM handler to save and restore errno. + Change SunOS include/compat.h to include so that the ex/filter.c code works again. + Don't put lines deleted by the ex delete command into the numeric buffers, matching historic practice. + Fix; if appending to a buffer, default buffer historically only references the appended text, not the resulting text. + Support multiple, semi-colon separated search strings, and 'z' commands after search strings. + Make previous context mark setting match historic practice (see docs/internals/context). + Fix the set command to permit whitespace between the option and the question mark, fix question marks in general. + Fix bug where ex error messages could be accidentally preceded by a single space. + Fix bug where curses reorganization could lose screen specific mappings as soon as any screen exited. + Fix bug in paragraph code where invalid macros could be matched. Make paragraph motions stop at formfeed (^L) characters. + Change 'c' to match historic practice, it cut text into numeric buffers. 1.25 -> 1.26 Tue Jul 19 17:46:24 1994 + Ignore SIGWINCH if the screen size is unchanged; SunOS systems deliver one when a screen is uncovered. + Fix: don't permit a command with a motion component to wrap due to wrapscan and return to the original cursor position. + Fix: ^E wasn't beeping when reaching the bottom of the file. + Fix bg/fg bug where tmp file exiting caused a NULL dereference. + Rework file locking code to use fcntl(2) explicitly. + Fix bug in section code where invalid macros could be matched. + Fix bug where line number reset by vi's Q command. + Add explicit character mode designation to character mode buffers. + Add include to sex/sex_window.c, needed by NET/2 vintage systems. + Change to always flush a character during suspend, 4BSD curses has the optimization where it doesn't flush after a standend(). + Fix bug on OSF1 where changes the values of VERASE, VKILL and VWERASE to incorrect ones. + Fix bug where optarg used incorrectly in main.c. + Block all signals when acting on a signal delivery. + Fix recovery bug where RCV_EMAIL could fire even if there wasn't a backing file; format recovery message. 1.24 -> 1.25 Sun Jul 17 14:33:38 1994 + Stop allowing keyboard suspends (^Z) in insert mode, it's hard to get autowrite correct, and it's not historic practice. + Fix z^, z+ to match historic practice. + Bug in message handling, "vi +35 non-existent_file" lost the status message because the "+35" pushed onto the stack erased it. For now, change so that messages aren't displayed if there are keys waiting -- may need to add a "don't-erase" bit to the character in the stack instead. + Bug in svi_msgflush(), where error messages could come out in normal video. 1.23 -> 1.24 Sat Jul 16 18:30:18 1994 + Fix core dump in exf.c, where editing a non-existent file and exiting could cause already free'd memory to be free'd. + Clean up numerous memory errors, courtesy of Purify. + Change process wait code to fail if wait fails, and not attempt to interpret the wait return information. + Open recovery and DB files for writing as well as reading, System V (fcntl) won't let you acquire LOCK_EX locks otherwise. + Fix substitute bug where could malloc 0 bytes (AIX breaks). + Permit the mapping of , it's historic practice. + Historic vi didn't eat characters before the force flag, match historic practice. + Bug in ex argument parsing, corrected for literal characters twice. + Delete screen specific maps when the screen closes. + Move to the first non- in the line on startup; historic practice. + Change the ex visual command to move directly to a line if no trailing 'z' command. + Fix "[[" and "]]" to match historic practice (yet again...). + Fix "yb" and "y{" commands to update the cursor correctly. + Change "~" to match the yank cursor movement semantics exactly. + Move all of the curses related code into sex/svi -- major rework, but should help in future ports. + Fix bug in split code caused by new file naming code, where would drop core when a split screen exited. + Change svi_ex_write to do character display translation, so that messages with file names in them are displayed correctly. + Display the file name on split screens instead of a divider line. + Fix move bug, wasn't copying lines before putting them. + Fix bug were :n dropped core if no arguments supplied. + Don't quote characters in executed buffer: "ifoo" should leave insert mode after the buffer is executed. + Tagpop and tagpush should set the absolute mark in case only moving within a file. + Skip leading whitespace characters before tags and cursor word searches. + Fix bug in ex_global where re_conv() was allocating the temporary buffer and not freeing it. 1.22 -> 1.23: Wed Jun 29 19:22:33 1994 + New required "inline" to change to "__inline" + Fix System V curses code for new ^Z support. + Fix off-by-one in the move code, avoid ":1,$mo$" with only one line in the buffer. + Line orientation of motion commands was remembered too long, i.e. '.' command could be incorrectly marked as line oriented. + Move file modification time into EXF, so it's shared across split screens. + Put the prev[ious] command back in, people complained. + Random fixes to next/prev semantics changed in 1.22. + Historically vi doesn't only move to the last address if there's ANYTHING after the addresses, e.g. ":3" moves to line 3, ":3|" prints line 3. 1.21 -> 1.22: Mon Jun 27 11:01:41 1994 + Make the line between split screens inverse video again. + Delete the prev[ious] command, it's not useful enough to keep. + Rework :args/file name handling from scratch -- MAJOR CHANGE, likely to introduce all sorts of new bugs. + Fix RE bug where no subexpressions in the pattern but there were subexpressions referenced in the replacement, e.g. "s/XXX/\1/g". + Change recovery to not leave unmodified files around after a crash, by using the owner 'x' bit on unmodified backup files. MAJOR CHANGE, the system recovery script has to change! + Change -r option to delete recovery.* files that reference non- existent vi.* files. + Rework recovery locking so that fcntl(2) locking will work. + Fix append (upper-case) buffers, broken by cut fixes. + Fix | to not set the absolute motion mark. + Read $HOME/.exrc file on startup if the effective user ID is root. This makes running vi while su(1)'d work correctly. + Use the full pathname of the file as the recovery name, not just the last component. Matches historic practice. + Keep marks in empty files from being destroyed. + Block all caught signals before calling the DB routines. + Make the line change report match historic practice (yanked lines were different than everything else). + Add section on multiple screens to the reference manual. + Display all messages at once, combine onto a single line if possible. Delete the trailing period from all messages. 1.20 -> 1.21: Thu May 19 12:21:58 1994 + Delete the -l flag from the recover mail. + Send the user email if ex command :preserve executed, this matches historic practice. Lots of changes to the preserve and recovery code, change preserve to snapshot files (again, historic practice). + Make buffers match historic practice: "add logically stores text into buffer a, buffer 1, and the unnamed buffer. + Print characters as ^I on the colon command line if the list option set. + Adjust ^F and ^B scroll values in the presence of split screens and small windows. + Break msg* routines out from util.c into msg.c, start thinking about message catalogs. + Add tildeop set option, based on stevie's option of the same name. Changes the ~ command into "[count] ~ motion", i.e. ~ takes a trailing motion. + Chose NOT to match historic practice on cursor positioning after consecutive undo commands on a single line; see vi/v_undo.c for the comment. + Add a one line cache so that multiple changes to the same line are only counted once (e.g. "dl35p" changes one line, not 35). + Rework signals some more. Block file sync signals in vi routines that interface to DB, so can sync the files at interrupt time. Write up all of the signal handling arguments, see signal.c. 1.19 -> 1.20: Thu May 5 19:24:57 1994 + Return ^Z to synchronous handling. See the dicussion in signal.c and svi_screen.c:svi_curses_init(). + Fix bug where line change report was wrong in util.c:msg_rpt(). 1.18 -> 1.19: Thu May 5 12:59:51 1994 + Block DSUSP so that ^Y isn't delivered at SIGTSTP. + Fix bug -- put into an empty file leaves the cursor at 1,0, not the first nonblank. + Fix bug were number of lines reported for the 'P' command was off-by-one. + Fix bug were 0^D wasn't being handled correctly. + Delete remnants of ^Z as a raw character. + Fix bug where if a map was an entire colon command, it may never have been displayed. + Final cursor position fixes for the vi T and t commands. + The ex :next command took an optional ex command as it's first argument similar to the :edit commands. Match historic practice. 1.17 -> 1.18: Wed May 4 13:57:10 1994 + Rework curses information in the PORT/Makefile's. + Minor fixes to ^Z asynchronous code. 1.16 -> 1.17: Wed May 4 11:15:56 1994 + Make ex comment handling match historic practice. + Make ^Z work asynchronously, we can no longer use the SIGTSTP handler in the curses library. 1.15 -> 1.16: Mon May 2 19:42:07 1994 + Make the 'p' and 'P' commands support counts, i.e. "Y10p" works. + Make characters that map to themselves as the first part of the mapping work, it's historic practice. + Fix bug where "s/./\& /" discarded the space in the replacement string. + Add support for up/down cursor arrows in text input mode, rework left/right support to match industry practice. + Fix bug were enough character remapping could corrupt memory. + Delete O_REMAPMAX in favor of setting interrupts after N mapped characters without a read, delete the map counter per character. MAJOR CHANGE. All of the interrupt signal handling has been reworked so that interrupts are always turned on instead of being turned on periodically, when an interruptible operation is pending. + Fix bug where vi wait() was interrupted by the recovery alarm. + Make +cmd's and initial commands execute with the current line set to the last line of the file. This is historic practice. + Change "lock failed" error message to a file status message. It always fails over NFS, and making all NFS files readonly isn't going to fly. + Use the historic line number format, but check for overflow. + Fix bug where vi command parser ignored buffers specified as part of the motion command. + Make [@*]buffer commands on character mode buffers match historic practice. + Fix bug where the cmap/chf entries of the tty structure weren't being cleared when new characters were read. + Fix bug where the default command motion flags were being set when the command was a motion component. + Fix wrapmargin bug; if appending characters, and wrapmargin breaks the line, an additional space is eaten. 1.14 -> 1.15: Fri Apr 29 07:44:57 1994 + Make the ex delete command work in any empty file. + Fix bug where 't' command placed the cursor on the character instead of to its left. + ^D and ^U didn't set the scroll option value historically. Note, this change means that any user set value (e.g. 15^D) will be lost when splitting the screen, since the split code now resets the scroll value regardless. + Fix the ( command to set the absolute movement mark. + Only use TIOCGWINSZ for window information if SIGWINCH signal caught. + Delete the -l flag, and make -r work for multiple arguments. Add the ex "recover[!] file" command. + Switch into ex terminal mode and use the sex routines when append/change/insert called from vi mode. + Make ^F and ^B match historic practice. This required a fairly extensive rework of the svi scrolling code. + Cursor positioning in H, M, L, G (first non-blank for 1G) wasn't being done correctly. Delete the SETLFNB flag. H, M, and L stay logical movements (SETNNB) and G always moves to the first nonblank. + System V uses "lines" and "cols", not "li" and "co", change as necessary. Check termcap function returns for errors. + Fix ` command to do start/end of line correction, and to set line mode if starting and stopping at column 0. + Fix bug in delete code where dropped core if deleted in character mode to an empty line. (Rework the delete code for efficiency.) + Give up on SunOS 4.1.X, and use "cc" instead of /usr/5bin/cc. + Protect ex_getline routine from interrupted system calls (if possible, set SA_RESTART on SIGALRM, too). + Fix leftright scrolling bug, when moving to a shorter line. + Do validity checking on the copy, move, t command target line numbers. + Change for System V % pattern broke trailing flags for empty replacement strings. + Fix bug when RCM flags retained in the saved dot structure. + Make the ex '=' command work for empty files. + Fix bug where special_key array was being free'd (it's no longer allocated). + Matches cut in line mode only if the starting cursor is at or before the first nonblank in its line, and the ending cursor is at or after the last nonblank in its line. + Add the :wn command, so you can write a file and switch to a new file in one command. + Allow only a single key as an argument to :viusage. + New movement code broke filter/paragraph operations in empty files ("!}date" in an empty file was dropping core). 1.12 -> 1.14: Mon Apr 18 11:05:10 1994 (PUBLICLY AVAILABLE VERSION, 4.4BSD) + Fix FILE structure leakage in the ex filter code. + Rework suspend code for System V curses. Nvi has to do the the work, there's no way to get curses to do it right. + Revert SunOS 4.1.X ports to the distributed curses. There's a bug in Sun's implementation that we can't live with. + Quit immediately if row/column values are unreasonable. + Fix the function keys to match vi historic behavior. + Replace the echo/awk magic in the Makefile's with awk scripts. 1.11 -> 1.12: Thu Apr 14 11:10:19 1994 + Fix bug where only the first vi key was checked for validity. + Make 'R' continue to overwrite after a . + Only display the "no recovery" message once. + Rework line backup code to restore the line to its previous condition. + Don't permit :q in a .exrc file or EXINIT variable. + Fix wrapscan option bug where forward searches become backward searches and do cursor correction accordingly. + Change "dd" to move the cursor to the first non-blank on the line. + Delete cursor attraction to the first non-blank, change non-blank motions to set the most attractive cursor position instead. + Fix 'r' substitute option to set the RE to the last RE, not the last substitute RE. + Fix 'c' and 'g' substitute options to always toggle, and fix edcompatible option to not reset them. + Display ex error messages in inverse video. + Fix errorbells option to match historic practice. + Delete fixed character display table in favor of table built based on the current locale. + Add ":set octal" option, that displays unknown characters as octal values instead of the default hexadecimal. + Make all command and text input modes interruptible. + Fix ex input mode to display error messages immediately, instead of waiting for the lines to be resolved. + Fix bug where vi calling append could overwrite the command. + Fix off-by-one in the ex print routine tab code. + Fix incorrect ^D test in vi text input routines. + Add autoindent support for ex text insert routines. + Add System V substitute command replacement pattern semantics, where '%' means the last replacement pattern. + Fix bug that \ didn't escape newlines in ex commands. + Regularize the names of special characters to CH_*. + Change hex insert character from ^Vx to ^X + Integrate System V style curses, so SunOS and Solaris ports can use the native curses implementation. 1.10 -> 1.11: Thu Mar 24 16:07:45 EST 1994 (PUBLICLY AVAILABLE VERSION) + Change H, M, and L to set the absolute mark, historical practice. + Fix bug in stepping through multiple tags files. + Add "remapmax" option that turns off map counts so you can remap infinitely. If it's off, term_key() can be interrupted from the keyboard, which will cause the buffers to flush. I also dropped the default max number of remaps to 50. (Only Dave Hitz's TM macros and maze appear to go over that limit.) + Change :mkexrc to not dump w{300,1200,9600}, lisp options. + Fix backward search within a line bug. + Change all the includes of "pathnames.h" to use <>'s so that the PORT versions can use -I. to replace it with their own versions. + Make reads and writes interruptible. Rework code that enters and leaves ex for '!' and filter commands, rework all interrupt and timer code. + Fix core dump when user displayed option in .exrc file. + Fix bug where writing empty files didn't update the saved modification time. + Fix bug where /pattern/ addressing was always a backward search. + Fix bug triggered by autoindent of more than 32 characters, where nvi wasn't checking the right TEXT length. + Fix bug where joining only empty lines caused a core dump. 1.09 -> 1.10: Sat Mar 19 15:40:29 EST 1994 + Fix "set all" core dump. 1.08 -> 1.09: Sat Mar 19 10:11:14 EST 1994 + If the tag's file path is relative, and it doesn't exist, check relative to the tag file location. + Fix ~ command to free temporary buffer on error return. + Create vi.ref, a first cut at a reference document for vi. The manual page and the reference document only document the set options, so far. + Fix 1G bug not always going to the first non-blank. + Upgrade PORT/regex to release alpha3.4, from Henry Spencer. + Add MKS vi's "cdpath" option, supporting a cd search path. + Handle if search as a motion was discarded, i.e. "d/". + Change nvi to not create multiple recovery files if modifying a recovered file. + Decide to ignore that the cursor is before the '$' when inserting in list mode. It's too hard to fix. 1.07 -> 1.08: Wed Mar 16 07:37:36 EST 1994 + Leftright and big line scrolling fixes. This meant more changes to the screen display code, so there may be new problems. + Don't permit search-style addresses until a file has been read. + "c[Ww]" command incorrectly handled the "in whitespace" case. + Fix key space allocation bug triggered by cut/paste under SunOS. + Ex move command got the final cursor position wrong. + Delete "optimize option not implemented" message. + Make the literal-next character turn off mapping for the next character in text input mode. 1.06 -> 1.07: Mon Mar 14 11:10:33 EST 1994 + The "wire down" change in 1.05 broke ex command parsing, there wasn't a corresponding change to handle multiple K_VLNEXT chars. + Fix final position for vi's 't' command. 1.05 -> 1.06: Sun Mar 13 16:12:52 EST 1994 + Wire down ^D, ^H, ^W, and ^V, regardless of the user's termios values. + Add ^D as the ex scroll command. + Support ^Q as a literal-next character. + Rework abbreviations to be delimited by any !inword() character. + Add options description to the manual page. + Minor screen cache fix for svi_get.c. + Rework beautify option support to match historical practice. + Exit immediately if not reading from a tty and a command fails. + Default the SunOS 4.* ports to the distributed curses, not SMI's. 1.04 -> 1.05: Thu Mar 24 16:07:45 EST 1994 + Make cursor keys work in input mode. + Rework screen column code in vi curses screen. MAJOR CHANGE -- after this, we'll be debugging curses screen presentation from scratch. + Explode include files in vi.h into the source files. 1.03 -> 1.04: Sun Mar 6 14:14:16 EST 1994 + Make the ex move command keep the marks on the moved lines. + Change resize semantics so you can set the screen size to a specific value. A couple of screen fixes for the resize code. + Fixes for foreground/background due to SIGWINCH. + Complete rework of all of vi's cursor movements. The underlying assumption in the old code was that the starting cursor position was part of the range of lines cut or deleted. The command "d[[" is an example where this isn't true. Change it so that all motion component commands set the final cursor position separately from the range, as it can't be done correctly later. This is a MAJOR CHANGE -- after this change, we'll be debugging the cursor positioning from scratch. + Rewrite the B, b, E, e commands to use vi's getc() interface instead of rolling their own. + Add a second MARK structure, LMARK, which is the larger mark needed by the logging and mark queue code. Everything else uses the reworked MARK structure, which is simply a line/column pair. + Rework cut/delete to not expect 1-past-the-end in the range, but to act on text to the end of the range, inclusive. + Sync on write's, to force NFS to flush. 1.01 -> 1.03: Sun Jan 23 17:50:35 EST 1994 (PUBLICLY AVAILABLE VERSION) + Tag stack fixes, was returning to the tag, not the position from which the user tagged. + Only use from the cursor to the end of the word in cursor word searches and tags. (Matches historical vi behavior.) + Fix delete-last-line bug when line number option set. + Fix usage line for :split command. + If O_NUMBER set, long input lines would eventually fail, the column count for the second screen of long lines wasn't set correctly. + Fix for [[ reaching SOF with a column longer than the first line. + Fix for multiple error messages if no screen displayed. + Fix :read to set alternate file name as in historical practice. + Fix cut to rotate the numeric buffers if line mode flag set. 1.00 -> 1.01: Wed Jan 12 13:37:18 EST 1994 + Don't put cut items into numeric buffers if cutting less than parts of two lines. 0.94 -> 1.00: Mon Jan 10 02:27:27 EST 1994 + Read-ahead not there; BSD tty driver problem, SunOS curses problem. + Global command could error if it deleted the last line of the file. + Change '.' to only apply to the 'u' if entered immediately after the 'u' command. "1pu.u.u. is still broken, but I expect that it's going to be sacrificed for multiple undo. + If backward motion on a command, now move to the point; get yank cursor positioning correct. + Rework cut buffers to match historic practice -- yank/delete numeric buffers redone sensibly, ignoring historic practice. 0.92 -> 0.93: Mon Dec 20 19:52:14 EST 1993 + Christos Zoulas reimplemented the script windows using pty's, which means that they now work reasonably. The down side of this is that almost all ports other than 4.4BSD need to include two new files, login_tty.c and pty.c from the PORT/clib directory. I've added them to the Makefiles. + All calloc/malloc/realloc functions now cast their pointers, for SunOS -- there should be far fewer warning messages, during the build. The remaining messages are where CHAR_T's meet char *'s, i.e. where 8-bit clean meets strcmp. + The user's argument list handling has been reworked so that there is always a single consistent position for use by :next, :prev and :rewind. + All of the historical options are now at least accepted, although not all of them are implemented. (Edcompatible, hardtabs, lisp, optimize, redraw, and slowopen aren't implemented.) + The RE's have been reworked so that matches of length 0 are handled in the same way as vi used to handle them. + Several more mapping fixes and ex parser addressing fixes. vigor-0.016.orig/docs/ev0100644000076400007640000000324007103707245013557 0ustar cjw44cjw44# @(#)ev 8.4 (Berkeley) 4/29/94 Ev: Vi: Result: (Cursor keys). Move around the file. Meta key commands: ^A<#> <#>G Goto line #. ^A$ G Goto the end of the file. ^A/ / Prompt and execute a forward search. ^A: : Prompt and execute an ex command. ^A? ? Prompt and execute a backward search. ^Ac y' Copy to mark in line mode (or copy the current line). ^AC y` Copy to mark in character mode. ^Ad d' Delete to mark in line mode (or delete the current line). ^AD d` Delete to mark in character mode. ^Aj J Join lines. ^Am m Mark the current cursor position. ^AN N Repeat search in the reverse direction. ^An ^A Search for the word under the cursor. ^Ar u Redo a command. ^Au u Undo a command. Single key commands: ^B ^B Page up a screen. ^C ^C Interrupt long-running commands. ^D ^D Page down a half-screen. ^E $ End of line. ^F ^F Page down a screen. ^G ^G File status/information. ^H X Delete the character to the left of the cursor. ^I (TAB) ^J j Cursor down one line. ^K k Cursor up one line. ^L ^L Redraw the screen. ^M (CR) ^M In insert mode, split the line at the current cursor, creating a new line. In overwrite mode, cursor down one line. ^N n Repeat previous search, in previous direction. ^O (UNUSED) ^P p Paste the cut text at the cursor position. ^Q (XON/XOFF) ^R (UNUSED) ^S (XON/XOFF) ^T D Truncate the line at the cursor position. ^U ^U Page up a half-screen. ^V ^V Insert/overwrite with a literal next character. ^W w Move forward one whitespace separated word. ^X x Delete the current character. ^Y (UNUSED) ^Z ^Z Suspend. New ex mode commands: ^A:set ov[erwrite] Toggle "insert" mode, so that input keys overwrite the existing characters. vigor-0.016.orig/tcl_scripts/0040755000076400007640000000000007103707245014627 5ustar cjw44cjw44vigor-0.016.orig/tcl_scripts/errors.tcl0100644000076400007640000000225607103707245016651 0ustar cjw44cjw44# @(#)errors.tcl 8.2 (Berkeley) 11/18/95 # # File: errors.tcl # # Author: George V. Neville-Neil # # Purpose: This file contains vi/tcl code that allows a vi user to parse # compiler errors and warnings from a make.out file. proc findErr {} { global errScreen global currFile global fileScreen set errLine [lindex [viGetCursor $errScreen] 0] set currLine [split [viGetLine $errScreen $errLine] :] set currFile [lindex $currLine 0] set fileScreen [viNewScreen $errScreen $currFile] viSetCursor $fileScreen [lindex $currLine 1] 1 viMapKey $viScreenId  nextErr } proc nextErr {} { global errScreen global fileScreen global currFile set errLine [lindex [viGetCursor $errScreen] 0] set currLine [split [viGetLine $errScreen $errLine] :] if {[string match $currFile [lindex $currLine 0]]} { viSetCursor $fileScreen [lindex $currLine 1] 0 viSwitchScreen $fileScreen } else { viEndScreen $fileScreen set currFile [lindex $currLine 0] set fileScreen[viNewScreen $errScreen $currFile] viSetCursor $fileScreen [lindex $currLine 1] 0 } } proc initErr {} { global viScreenId global errScreen set errScreen [viNewScreen $viScreenId make.out] viMapKey $viScreenId  findErr } vigor-0.016.orig/tcl_scripts/gnats.tcl0100644000076400007640000000513607103707245016451 0ustar cjw44cjw44# @(#)gnats.tcl 8.2 (Berkeley) 11/18/95 # proc init {catFile} { global viScreenId global categories set categories {} set categoriesFile [open $catFile r] while {[gets $categoriesFile line] >= 0} { lappend categories $line } close $categoriesFile viMsg $viScreenId $categories viMapKey $viScreenId  next } proc next {} { global viScreenId set cursor [viGetCursor $viScreenId] set lineNum [lindex $cursor 0] set line [viGetLine $viScreenId $lineNum] viMsg $viScreenId [lindex $line 0] if {[lindex $line 0] == ">Confidential:"} { confNext $lineNum $line } elseif {[lindex $line 0] == ">Severity:"} { sevNext $lineNum $line } elseif {[lindex $line 0] == ">Priority:"} { priNext $lineNum $line } elseif {[lindex $line 0] == ">Class:"} { classNext $lineNum $line } elseif {[lindex $line 0] == ">Category:"} { catNext $lineNum $line } } proc confNext {lineNum line} { global viScreenId viMsg $viScreenId [lindex $line 1] if {[lindex $line 1] == "yes"} { viSetLine $viScreenId $lineNum ">Confidential: no" } else { viSetLine $viScreenId $lineNum ">Confidential: yes" } } proc sevNext {lineNum line} { global viScreenId viMsg $viScreenId [lindex $line 1] if {[lindex $line 1] == "non-critical"} { viSetLine $viScreenId $lineNum ">Severity: serious" } elseif {[lindex $line 1] == "serious"} { viSetLine $viScreenId $lineNum ">Severity: critical" } elseif {[lindex $line 1] == "critical"} { viSetLine $viScreenId $lineNum ">Severity: non-critical" } } proc priNext {lineNum line} { global viScreenId viMsg $viScreenId [lindex $line 1] if {[lindex $line 1] == "low"} { viSetLine $viScreenId $lineNum ">Priority: medium" } elseif {[lindex $line 1] == "medium"} { viSetLine $viScreenId $lineNum ">Priority: high" } elseif {[lindex $line 1] == "high"} { viSetLine $viScreenId $lineNum ">Priority: low" } } proc classNext {lineNum line} { global viScreenId viMsg $viScreenId [lindex $line 1] if {[lindex $line 1] == "sw-bug"} { viSetLine $viScreenId $lineNum ">Class: doc-bug" } elseif {[lindex $line 1] == "doc-bug"} { viSetLine $viScreenId $lineNum ">Class: change-request" } elseif {[lindex $line 1] == "change-request"} { viSetLine $viScreenId $lineNum ">Class: support" } elseif {[lindex $line 1] == "support"} { viSetLine $viScreenId $lineNum ">Class: sw-bug" } } proc catNext {lineNum line} { global viScreenId global categories viMsg $viScreenId [lindex $line 1] set curr [lsearch -exact $categories [lindex $line 1]] if {$curr == -1} { set curr 0 } viMsg $viScreenId $curr viSetLine $viScreenId $lineNum ">Class: [lindex $categories $curr]" } init abekas vigor-0.016.orig/tcl_scripts/mailprocs.tcl0100644000076400007640000000501007103707245017315 0ustar cjw44cjw44# @(#)mailprocs.tcl 8.3 (Berkeley) 4/29/96 # proc validLine {} { global viScreenId set line [viGetLine $viScreenId [lindex [viGetCursor $viScreenId] 0]] if {[string compare [lindex [split $line :] 0] "To"] == 0} { set addrs [lindex [split $line :] 1] foreach name [split $addrs ,] { isValid [string trim $name] } } } proc valid {target} { set found 0 set aliasFile [open "~/Mail/aliases" r] while {[gets $aliasFile line] >= 0} { set name [lindex [split $line :] 0] set address [lindex [split $line :] 1] if {[string compare $target $name] == 0} { set found 1 break } } close $aliasFile if {$found == 1} { return $address } else { return $found } } proc isValid {target} { global viScreenId set address [valid $target] if {$address != 0} { viMsg $viScreenId "$target is [string trim $address]" } else { viMsg $viScreenId "$target not found" } } proc isAliasedLine {} { global viScreenId set line [viGetLine $viScreenId [lindex [viGetCursor $viScreenId] 0]] if {[string match [lindex [split $line :] 0] "*To"] == 0} { set addrs [lindex [split $line :] 1] foreach name [split $addrs ,] { isAliased [string trim $name] } } } proc aliased {target} { set found 0 set aliasFile [open "~/Mail/aliases" r] while {[gets $aliasFile line] >= 0} { set name [lindex [split $line :] 0] set address [lindex [split $line :] 1] if {[string compare $target [string trim $address]] == 0} { set found 1 break } } close $aliasFile return $found } proc isAliased {target} { global viScreenId set found [aliased $target] if {$found} { viMsg $viScreenId "$target is aliased to [string trim $name]" } else { viMsg $viScreenId "$target not aliased" } } proc appendAlias {target address} { if {![aliased $target]} { set aliasFile [open "~/Mail/aliases" a] puts $aliasFile "$target: $address" } close $aliasFile } proc expand {} { global viScreenId set row [lindex [viGetCursor $viScreenId] 0]] set column [lindex [viGetCursor $viScreenId] 1]] set line [viGetLine $viScreenId $row] while {$column < [string length $line] && \ [string index $line $column] != ' '} { append $target [string index $line $column] incr $column } set found [isValid $target] } proc cite {} { global viScreenId global viStartLine global viStopLine for {set i $viStartLine} {$i <= $viStopLine} {incr i} { set newLine "> " append newLine [viGetLine $viScreenId $i] viSetLine $viScreenId $i $newLine } } global viScreenId viMapKey $viScreenId  isAliasedLine viMapKey $viScreenId  validLine vigor-0.016.orig/tcl_scripts/wc.tcl0100644000076400007640000000057507103707245015750 0ustar cjw44cjw44# @(#)wc.tcl 8.2 (Berkeley) 11/18/95 # proc wc {} { global viScreenId global viStartLine global viStopLine set lines [viLastLine $viScreenId] set output "" set words 0 for {set i $viStartLine} {$i <= $viStopLine} {incr i} { set outLine [split [string trim [viGetLine $viScreenId $i]]] set words [expr $words + [llength $outLine]] } viMsg $viScreenId "$words words" } vigor-0.016.orig/tk/0040755000076400007640000000000007103707246012715 5ustar cjw44cjw44vigor-0.016.orig/tk/init.tcl0100644000076400007640000010345307103707246014367 0ustar cjw44cjw44# @(#)init.tcl 8.10 (Berkeley) 7/19/96 proc screen {} { global tk_ssize_row global tk_ssize_col # Build menubar with File, Options and Help entries. frame .menu -relief raised -borderwidth 1 pack append . .menu {top fillx} # File pull-down menu menubutton .menu.file -text "File" \ -menu .menu.file.fileops -underline 0 menu .menu.file.fileops .menu.file.fileops add command -label "Edit ..." \ -command "tk_edit" -underline 0 .menu.file.fileops add command -label "Save File" \ -command "tk_write" -underline 0 .menu.file.fileops add command -label "Save File as ..." \ -command "tk_writeas" -underline 1 .menu.file.fileops add command -label "Save and Quit" \ -command "tk_writequit" -underline 7 .menu.file.fileops add command -label "Quit" \ -command "tk_quit" -underline 0 # Options pull-down menu menubutton .menu.option -text "Options" \ -menu .menu.option.optionops -underline 0 menu .menu.option.optionops .menu.option.optionops add command -label "Set all" \ -command tk_options -underline 0 # Help pull-down menu menubutton .menu.help -text "Help" \ -menu .menu.help.helpops -underline 0 menu .menu.help.helpops .menu.help.helpops add command -label "On Help" -underline 3 \ -command tk_help .menu.help.helpops add command -label "On Version" -underline 3 \ -command tk_version pack append .menu \ .menu.file {left} .menu.option {left} .menu.help {right} # Set up for keyboard-based menu traversal tk_bindForTraversal . bind . {focus .} focus . tk_menuBar .menu .menu.file .menu.help # Create text window text .t -relief raised -bd 1 -setgrid true -yscrollcommand ".s set" scrollbar .s -relief flat -command ".t yview" pack append . .s {right filly} .t {expand fill} # Use tags to build a cursor for the text window. set bg [lindex [.t config -background] 4] set fg [lindex [.t config -foreground] 4] .t tag configure tk_cursor -background $fg -foreground $bg .t mark set tk_cursor_indx insert .t tag add tk_cursor tk_cursor_indx # Bind the keys. bind .t {tk_flash; break} bind .t 0 {tk_key_enter "0"; break} bind .t 1 {tk_key_enter "1"; break} bind .t 2 {tk_key_enter "2"; break} bind .t 3 {tk_key_enter "3"; break} bind .t 4 {tk_key_enter "4"; break} bind .t 5 {tk_key_enter "5"; break} bind .t 6 {tk_key_enter "6"; break} bind .t 7 {tk_key_enter "7"; break} bind .t 8 {tk_key_enter "8"; break} bind .t 9 {tk_key_enter "9"; break} bind .t {tk_key_enter "\010"; break} bind .t {tk_key_enter "\001"; break} bind .t {tk_key_enter "\002"; break} bind .t {tk_key_enter "\003"; break} bind .t {tk_key_enter "\004"; break} bind .t {tk_key_enter "\005"; break} bind .t {tk_key_enter "\006"; break} bind .t {tk_key_enter "\007"; break} bind .t {tk_key_enter "\010"; break} bind .t {tk_key_enter "\011"; break} bind .t {tk_key_enter "\012"; break} bind .t {tk_key_enter "\013"; break} bind .t {tk_key_enter "\014"; break} bind .t {tk_key_enter "\015"; break} bind .t {tk_key_enter "\016"; break} bind .t {tk_key_enter "\017"; break} bind .t {tk_key_enter "\020"; break} bind .t {tk_key_enter "\021"; break} bind .t {tk_key_enter "\022"; break} bind .t {tk_key_enter "\023"; break} bind .t {tk_key_enter "\024"; break} bind .t {tk_key_enter "\025"; break} bind .t {tk_key_enter "\026"; break} bind .t {tk_key_enter "\027"; break} bind .t {tk_key_enter "\030"; break} bind .t {tk_key_enter "\031"; break} bind .t {tk_key_enter "\032"; break} bind .t {tk_noop; break} bind .t {tk_noop; break} bind .t {tk_key_enter "x"; break} bind .t {tk_key_enter "j"; break} bind .t {tk_key_enter "G"; break} bind .t {tk_key_enter "\033"; break} bind .t {tk_key_enter "1G"; break} bind .t {tk_key_enter "i"; break} bind .t {tk_key_enter "h"; break} bind .t {tk_key_enter "\006"; break} bind .t {tk_key_enter "\002"; break} bind .t {tk_key_enter "\015"; break} bind .t {tk_key_enter "l"; break} bind .t {tk_noop; break} bind .t {tk_noop; break} bind .t {tk_noop; break} bind .t {tk_key_enter "\011"; break} bind .t {tk_key_enter "k"; break} bind .t {tk_key_enter "&"; break} bind .t {tk_key_enter "^"; break} bind .t {tk_key_enter "~"; break} bind .t {tk_key_enter "*"; break} bind .t {tk_key_enter "@"; break} bind .t {tk_key_enter "\\"; break} bind .t {tk_key_enter "|"; break} bind .t {tk_key_enter "{"; break} bind .t {tk_key_enter "; break}"} bind .t {tk_key_enter "\["; break} bind .t {tk_key_enter "]"; break} bind .t {tk_key_enter ":"; break} bind .t {tk_key_enter ","; break} bind .t {tk_key_enter "$"; break} bind .t {tk_key_enter "="; break} bind .t {tk_key_enter "!"; break} bind .t {tk_key_enter ">"; break} bind .t {tk_key_enter "<"; break} bind .t {tk_key_enter "-"; break} bind .t {tk_key_enter "#"; break} bind .t {tk_key_enter "("; break} bind .t {tk_key_enter ")"; break} bind .t {tk_key_enter "%"; break} bind .t {tk_key_enter "."; break} bind .t {tk_key_enter "+"; break} bind .t {tk_key_enter "?"; break} bind .t {tk_key_enter "\""; break} bind .t {tk_key_enter "'"; break} bind .t {tk_key_enter ";"; break} bind .t {tk_key_enter "/"; break} bind .t {tk_key_enter " "; break} bind .t {tk_key_enter "_"; break} bind .t A {tk_key_enter "A"; break} bind .t B {tk_key_enter "B"; break} bind .t C {tk_key_enter "C"; break} bind .t D {tk_key_enter "D"; break} bind .t E {tk_key_enter "E"; break} bind .t F {tk_key_enter "F"; break} bind .t G {tk_key_enter "G"; break} bind .t H {tk_key_enter "H"; break} bind .t I {tk_key_enter "I"; break} bind .t J {tk_key_enter "J"; break} bind .t K {tk_key_enter "K"; break} bind .t L {tk_key_enter "L"; break} bind .t M {tk_key_enter "M"; break} bind .t N {tk_key_enter "N"; break} bind .t O {tk_key_enter "O"; break} bind .t P {tk_key_enter "P"; break} bind .t Q {tk_key_enter "Q"; break} bind .t R {tk_key_enter "R"; break} bind .t S {tk_key_enter "S"; break} bind .t T {tk_key_enter "T"; break} bind .t U {tk_key_enter "U"; break} bind .t V {tk_key_enter "V"; break} bind .t W {tk_key_enter "W"; break} bind .t X {tk_key_enter "X"; break} bind .t Y {tk_key_enter "Y"; break} bind .t Z {tk_key_enter "Z"; break} bind .t a {tk_key_enter "a"; break} bind .t b {tk_key_enter "b"; break} bind .t c {tk_key_enter "c"; break} bind .t d {tk_key_enter "d"; break} bind .t e {tk_key_enter "e"; break} bind .t f {tk_key_enter "f"; break} bind .t g {tk_key_enter "g"; break} bind .t h {tk_key_enter "h"; break} bind .t i {tk_key_enter "i"; break} bind .t j {tk_key_enter "j"; break} bind .t k {tk_key_enter "k"; break} bind .t l {tk_key_enter "l"; break} bind .t m {tk_key_enter "m"; break} bind .t n {tk_key_enter "n"; break} bind .t o {tk_key_enter "o"; break} bind .t p {tk_key_enter "p"; break} bind .t q {tk_key_enter "q"; break} bind .t r {tk_key_enter "r"; break} bind .t s {tk_key_enter "s"; break} bind .t t {tk_key_enter "t"; break} bind .t u {tk_key_enter "u"; break} bind .t v {tk_key_enter "v"; break} bind .t w {tk_key_enter "w"; break} bind .t x {tk_key_enter "x"; break} bind .t y {tk_key_enter "y"; break} bind .t z {tk_key_enter "z"; break} # XXX # I haven't been able to make Tcl/Tk write uninitialized portions # of the text window. Fill in the screen. tk_ssize .t mark set insert 1.0 for {set i 1} {$i <= $tk_ssize_row} {incr i} { for {set j 1} {$j <= $tk_ssize_col} {incr j} { .t insert insert " " } .t insert insert "\n" } } # tk_noop -- # Do nothing. # # XXX # I can't figure out how to get a binding that does nothing without # calling a function, so this stub does it for me. proc tk_noop {} { } # tk_key_enter -- # Enter a key. proc tk_key_enter {val} { global newkey global waiting set waiting 0 tk_key $val set newkey 1 } # tk_key_wait -- # Wait for a key. proc tk_key_wait {timeout} { global newkey global waiting if { $timeout != 0 } { after $timeout "set newkey 1" } set waiting 1 tkwait variable newkey } # Callback functions for the File menu. # tk_edit # Edit another file. proc tk_edit {} { } # tk_quit # Quit. proc tk_quit {} { global newkey global waiting tk_op quit if { $waiting != 0 } { set newkey 1 } } # tk_write # Write the edit buffer. proc tk_write {} { global newkey global waiting tk_op write if { $waiting != 0 } { set newkey 1 } } # tk_writeas # Write the edit buffer to a named file. proc tk_writeas {} { } # tk_writequit # Write and quit. proc tk_writequit {} { global newkey global waiting tk_op writequit if { $waiting != 0 } { set newkey 1 } } # Callback functions for the Help menu. # # tk_help -- # Present a help screen. proc tk_help {} { tk_dialog .d {} "No help screen currently available." {} 0 Continue } # tk_options # Contains the option selector box. It is divided into three parts, the # checkbuttons for the boolean options, the entry fields for the string # numeric options, and a control area containing buttons. There is only # one function. proc tk_options {} { # Build option selector box with three subframes for boolean, # numeric, and string options. Make it a toplevel window. toplevel .os wm title .os options # Option variables. global tko_altwerase global tko_autoindent global tko_autoprint global tko_autowrite global tko_backup global tko_beautify global tko_cdpath global tko_cedit global tko_columns global tko_comment global tko_directory global tko_edcompatible global tko_escapetime global tko_errorbells global tko_exrc global tko_extended global tko_filec global tko_flash global tko_hardtabs global tko_iclower global tko_ignorecase global tko_keytime global tko_leftright global tko_lines global tko_lisp global tko_list global tko_lock global tko_magic global tko_matchtime global tko_mesg global tko_modeline global tko_msgcat global tko_noprint global tko_number global tko_octal global tko_open global tko_optimize global tko_paragraphs global tko_print global tko_prompt global tko_readonly global tko_recdir global tko_redraw global tko_remap global tko_report global tko_ruler global tko_scroll global tko_searchincr global tko_sections global tko_secure global tko_shell global tko_shellmeta global tko_shiftwidth global tko_showmatch global tko_showmode global tko_sidescroll global tko_slowopen global tko_sourceany global tko_tabstop global tko_taglength global tko_tags global tko_term global tko_terse global tko_tildeop global tko_timeout global tko_ttywerase global tko_verbose global tko_warn global tko_window global tko_windowname global tko_wraplen global tko_wrapmargin global tko_wrapscan global tko_writeany # Initialize option values. tk_opt_init # Build subframe for boolean options. frame .os.bopts # This is the width of the edcompatible button. set buttonwidth 13 # Pack the boolean os, 5 to a frame. frame .os.bopts.f1 pack append .os.bopts .os.bopts.f1 {top} checkbutton .os.bopts.f1.b1 \ -variable tko_altwerase -text "altwerase" \ -command "tk_opt_set altwerase $tko_altwerase" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f1.b2 \ -variable tko_autoindent -text "autoindent" \ -command "tk_opt_set autoindent $tko_autoindent" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f1.b3 \ -variable tko_autoprint -text "autoprint" \ -command "tk_opt_set autoprint $tko_autoprint" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f1.b4 \ -variable tko_autowrite -text "autowrite" \ -command "tk_opt_set autowrite $tko_autowrite" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f1.b5 \ -variable tko_beautify -text "beautify" \ -command "tk_opt_set beautify $tko_beautify" \ -width $buttonwidth -anchor w pack append .os.bopts.f1 \ .os.bopts.f1.b1 {left frame w} \ .os.bopts.f1.b2 {left frame w} \ .os.bopts.f1.b3 {left frame w} \ .os.bopts.f1.b4 {left frame w} \ .os.bopts.f1.b5 {left frame w} frame .os.bopts.f2 pack append .os.bopts .os.bopts.f2 {top} checkbutton .os.bopts.f2.b1 \ -variable tko_comment -text "comment" \ -command "tk_opt_set comment $tko_comment" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f2.b2 \ -variable tko_edcompatible -text "edcompatible" \ -command "tk_opt_set edcompatible $tko_edcompatible" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f2.b3 \ -variable tko_errorbells -text "errorbells" \ -command "tk_opt_set errorbells $tko_errorbells" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f2.b4 \ -variable tko_exrc -text "exrc" \ -command "tk_opt_set exrc $tko_exrc" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f2.b5 \ -variable tko_extended -text "extended" \ -command "tk_opt_set extended $tko_extended" \ -width $buttonwidth -anchor w pack append .os.bopts.f2 \ .os.bopts.f2.b1 {left frame w} \ .os.bopts.f2.b2 {left frame w} \ .os.bopts.f2.b3 {left frame w} \ .os.bopts.f2.b4 {left frame w} \ .os.bopts.f2.b5 {left frame w} frame .os.bopts.f3 pack append .os.bopts .os.bopts.f3 {top} checkbutton .os.bopts.f3.b1 \ -variable tko_flash -text "flash" \ -command "tk_opt_set flash $tko_flash" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f3.b2 \ -variable tko_iclower -text "iclower" \ -command "tk_opt_set iclower $tko_iclower" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f3.b3 \ -variable tko_ignorecase -text "ignorecase" \ -command "tk_opt_set ignorecase $tko_ignorecase" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f3.b4 \ -variable tko_leftright -text "leftright" \ -command "tk_opt_set leftright $tko_leftright" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f3.b5 \ -variable tko_lisp -text "lisp" \ -command "tk_opt_set lisp $tko_lisp" \ -width $buttonwidth -anchor w pack append .os.bopts.f3 \ .os.bopts.f3.b1 {left frame w} \ .os.bopts.f3.b2 {left frame w} \ .os.bopts.f3.b3 {left frame w} \ .os.bopts.f3.b4 {left frame w} \ .os.bopts.f3.b5 {left frame w} frame .os.bopts.f4 pack append .os.bopts .os.bopts.f4 {top} checkbutton .os.bopts.f4.b1 \ -variable tko_list -text "list" \ -command "tk_opt_set list $tko_list" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f4.b2 \ -variable tko_lock -text "lock" \ -command "tk_opt_set lock $tko_lock" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f4.b3 \ -variable tko_magic -text "magic" \ -command "tk_opt_set magic $tko_magic" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f4.b4 \ -variable tko_mesg -text "mesg" \ -command "tk_opt_set mesg $tko_mesg" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f4.b5\ -variable tko_number -text "number" \ -command "tk_opt_set number $tko_number" \ -width $buttonwidth -anchor w pack append .os.bopts.f4 \ .os.bopts.f4.b1 {left frame w} \ .os.bopts.f4.b2 {left frame w} \ .os.bopts.f4.b3 {left frame w} \ .os.bopts.f4.b4 {left frame w} \ .os.bopts.f4.b5 {left frame w} frame .os.bopts.f5 pack append .os.bopts .os.bopts.f5 {top} checkbutton .os.bopts.f5.b1 \ -variable tko_octal -text "octal" \ -command "tk_opt_set octal $tko_octal" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f5.b2 \ -variable tko_open -text "open" \ -command "tk_opt_set open $tko_open" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f5.b3 \ -variable tko_optimize -text "optimize" \ -command "tk_opt_set optimize $tko_optimize" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f5.b4 \ -variable tko_prompt -text "prompt" \ -command "tk_opt_set prompt $tko_prompt" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f5.b5 \ -variable tko_readonly -text "readonly" \ -command "tk_opt_set readonly $tko_readonly" \ -width $buttonwidth -anchor w pack append .os.bopts.f5 \ .os.bopts.f5.b1 {left frame w} \ .os.bopts.f5.b2 {left frame w} \ .os.bopts.f5.b3 {left frame w} \ .os.bopts.f5.b4 {left frame w} \ .os.bopts.f5.b5 {left frame w} frame .os.bopts.f6 pack append .os.bopts .os.bopts.f6 {top} checkbutton .os.bopts.f6.b1 \ -variable tko_remap -text "remap" \ -command "tk_opt_set remap $tko_remap" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f6.b2 \ -variable tko_ruler -text "ruler" \ -command "tk_opt_set ruler $tko_ruler" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f6.b3 \ -variable tko_searchincr -text "searchincr" \ -command "tk_opt_set searchincr $tko_searchincr" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f6.b4 \ -variable tko_secure -text "secure" \ -command "tk_opt_set secure $tko_secure" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f6.b5 \ -variable tko_showmatch -text "showmatch" \ -command "tk_opt_set showmatch $tko_showmatch" \ -width $buttonwidth -anchor w pack append .os.bopts.f6 \ .os.bopts.f6.b1 {left frame w} \ .os.bopts.f6.b2 {left frame w} \ .os.bopts.f6.b3 {left frame w} \ .os.bopts.f6.b4 {left frame w} \ .os.bopts.f6.b5 {left frame w} frame .os.bopts.f7 pack append .os.bopts .os.bopts.f7 {top} checkbutton .os.bopts.f7.b1 \ -variable tko_showmode -text "showmode" \ -command "tk_opt_set showmode $tko_showmode" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f7.b2 \ -variable tko_slowopen -text "slowopen" \ -command "tk_opt_set slowopen $tko_slowopen" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f7.b3 \ -variable tko_sourceany -text "sourceany" \ -command "tk_opt_set sourceany $tko_sourceany" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f7.b4 \ -variable tko_terse -text "terse" \ -command "tk_opt_set terse $tko_terse" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f7.b5 \ -variable tko_tildeop -text "tildeop" \ -command "tk_opt_set tildeope $tko_tildeop" \ -width $buttonwidth -anchor w pack append .os.bopts.f7 \ .os.bopts.f7.b1 {left frame w} \ .os.bopts.f7.b2 {left frame w} \ .os.bopts.f7.b3 {left frame w} \ .os.bopts.f7.b4 {left frame w} \ .os.bopts.f7.b5 {left frame w} frame .os.bopts.f8 pack append .os.bopts .os.bopts.f8 {top fillx} checkbutton .os.bopts.f8.b1 \ -variable tko_timeout -text "timeout" \ -command "tk_opt_set timeout $tko_timeout" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f8.b2 \ -variable tko_ttywerase -text "ttywerase" \ -command "tk_opt_set ttywerase $tko_ttywerase" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f8.b3 \ -variable tko_verbose -text "verbose" \ -command "tk_opt_set verbose $tko_verbose" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f8.b4 \ -variable tko_warn -text "warn" \ -command "tk_opt_set warn $tko_warn" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f8.b5 \ -variable tko_windowname -text "windowname" \ -command "tk_opt_set windowname $tko_windowname" \ -width $buttonwidth -anchor w pack append .os.bopts.f8 \ .os.bopts.f8.b1 {left frame w} \ .os.bopts.f8.b2 {left frame w} \ .os.bopts.f8.b3 {left frame w} \ .os.bopts.f8.b4 {left frame w} \ .os.bopts.f8.b5 {left frame w} frame .os.bopts.f9 pack append .os.bopts .os.bopts.f9 {top fillx} checkbutton .os.bopts.f9.b1 \ -variable tko_wrapscan -text "wrapscan" \ -command "tk_opt_set wrapscan $tko_wrapscan" \ -width $buttonwidth -anchor w checkbutton .os.bopts.f9.b2 \ -variable tko_writeany -text "writeany" \ -command "tk_opt_set writeany $tko_writeany" \ -width $buttonwidth -anchor w pack append .os.bopts.f9 \ .os.bopts.f9.b1 {left frame w} \ .os.bopts.f9.b2 {left frame w} # Build frame for number options: frame .os.nopts # Label and entry widths. set lwidth 12 set ewidth 3 frame .os.nopts.n1 label .os.nopts.n1.l -text "column:" -width $lwidth -anchor w entry .os.nopts.n1.e -width $ewidth -relief raised \ -textvariable tko_columns trace variable tko_columns w tk_opt_ew pack append .os.nopts.n1 \ .os.nopts.n1.l {left} .os.nopts.n1.e {left frame w} frame .os.nopts.n2 label .os.nopts.n2.l -text "escapetime:" -width $lwidth -anchor w entry .os.nopts.n2.e -width $ewidth -textvariable tko_escapetime \ -relief raised trace variable tko_escapetime w tk_opt_ew pack append .os.nopts.n2 \ .os.nopts.n2.l {left} .os.nopts.n2.e {left frame w} frame .os.nopts.n3 label .os.nopts.n3.l -text "hardtabs:" -width $lwidth -anchor w entry .os.nopts.n3.e -width $ewidth -textvariable tko_hardtabs \ -relief raised trace variable tko_hardtabs w tk_opt_ew pack append .os.nopts.n3 \ .os.nopts.n3.l {left} .os.nopts.n3.e {left frame w} frame .os.nopts.n4 label .os.nopts.n4.l -text "keytime:" -width $lwidth -anchor w entry .os.nopts.n4.e -width $ewidth -textvariable tko_keytime \ -relief raised trace variable tko_keytime w tk_opt_ew pack append .os.nopts.n4 \ .os.nopts.n4.l {left} .os.nopts.n4.e {left frame w} frame .os.nopts.n5 label .os.nopts.n5.l -text "lines:" -width $lwidth -anchor w entry .os.nopts.n5.e -width $ewidth -textvariable tko_lines \ -relief raised trace variable tko_lines w tk_opt_ew pack append .os.nopts.n5 \ .os.nopts.n5.l {left} .os.nopts.n5.e {left frame w} frame .os.nopts.n6 label .os.nopts.n6.l -text "matchtime:" -width $lwidth -anchor w entry .os.nopts.n6.e -width $ewidth -textvariable tko_matchtime \ -relief raised trace variable tko_matchtime w tk_opt_ew pack append .os.nopts.n6 \ .os.nopts.n6.l {left} .os.nopts.n6.e {left frame w} frame .os.nopts.n7 label .os.nopts.n7.l -text "report:" -width $lwidth -anchor w entry .os.nopts.n7.e -width $ewidth -textvariable tko_report \ -relief raised trace variable tko_report w tk_opt_ew pack append .os.nopts.n7 \ .os.nopts.n7.l {left} .os.nopts.n7.e {left frame w} frame .os.nopts.n8 label .os.nopts.n8.l -text "scroll:" -width $lwidth -anchor w entry .os.nopts.n8.e -width $ewidth -textvariable tko_scroll \ -relief raised trace variable tko_scroll w tk_opt_ew pack append .os.nopts.n8 \ .os.nopts.n8.l {left} .os.nopts.n8.e {left frame w} frame .os.nopts.n9 label .os.nopts.n9.l -text "shiftwidth:" -width $lwidth -anchor w entry .os.nopts.n9.e -width $ewidth -textvariable tko_shiftwidth \ -relief raised trace variable tko_shiftwidth w tk_opt_ew pack append .os.nopts.n9 \ .os.nopts.n9.l {left} .os.nopts.n9.e {left frame w} frame .os.nopts.n10 label .os.nopts.n10.l -text "sidescroll:" -width $lwidth -anchor w entry .os.nopts.n10.e -width $ewidth -textvariable tko_sidescroll \ -relief raised trace variable tko_sidescroll w tk_opt_ew pack append .os.nopts.n10 \ .os.nopts.n10.l {left} .os.nopts.n10.e {left frame w} frame .os.nopts.n11 label .os.nopts.n11.l -text "tabstop:" -width $lwidth -anchor w entry .os.nopts.n11.e -width $ewidth -textvariable tko_tabstop \ -relief raised trace variable tko_tabstop w tk_opt_ew pack append .os.nopts.n11 \ .os.nopts.n11.l {left} .os.nopts.n11.e {left frame w} frame .os.nopts.n12 label .os.nopts.n12.l -text "taglength:" -width $lwidth -anchor w entry .os.nopts.n12.e -width $ewidth -textvariable tko_taglength \ -relief raised trace variable tko_taglength w tk_opt_ew pack append .os.nopts.n12 \ .os.nopts.n12.l {left} .os.nopts.n12.e {left frame w} frame .os.nopts.n13 label .os.nopts.n13.l -text "window:" -width $lwidth -anchor w entry .os.nopts.n13.e -width $ewidth -textvariable tko_window \ -relief raised trace variable tko_window w tk_opt_ew pack append .os.nopts.n13 \ .os.nopts.n13.l {left} .os.nopts.n13.e {left frame w} frame .os.nopts.n14 label .os.nopts.n14.l -text "wraplen:" -width $lwidth -anchor w entry .os.nopts.n14.e -width $ewidth -textvariable tko_wraplen \ -relief raised trace variable tko_wraplen w tk_opt_ew pack append .os.nopts.n14 \ .os.nopts.n14.l {left} .os.nopts.n14.e {left frame w} frame .os.nopts.n15 label .os.nopts.n15.l -text "wrapmargin:" -width $lwidth -anchor w entry .os.nopts.n15.e -width $ewidth -textvariable tko_wrapmargin \ -relief raised trace variable tko_wrapmargin w tk_opt_ew pack append .os.nopts.n15 \ .os.nopts.n15.l {left} .os.nopts.n15.e {left frame w} pack append .os.nopts \ .os.nopts.n1 {top fillx} \ .os.nopts.n3 {top expand fillx} \ .os.nopts.n4 {top expand fillx} \ .os.nopts.n5 {top expand fillx} \ .os.nopts.n6 {top expand fillx} \ .os.nopts.n7 {top expand fillx} \ .os.nopts.n8 {top expand fillx} \ .os.nopts.n9 {top expand fillx} \ .os.nopts.n10 {top expand fillx} \ .os.nopts.n11 {top expand fillx} \ .os.nopts.n12 {top expand fillx} \ .os.nopts.n13 {top expand fillx} \ .os.nopts.n14 {top expand fillx} \ .os.nopts.n15 {top expand fillx} # Build frame for string options frame .os.sopts # Entry width. set ewidth 40 frame .os.sopts.s1 label .os.sopts.s1.l -text "backup:" -width $lwidth -anchor w entry .os.sopts.s1.e -width $ewidth -textvariable tko_backup \ -relief raised pack append .os.sopts.s1 \ .os.sopts.s1.l {left} .os.sopts.s1.e {left frame w} frame .os.sopts.s2 label .os.sopts.s2.l -text "cdpath:" -width $lwidth -anchor w entry .os.sopts.s2.e -width $ewidth -textvariable tko_cdpath \ -relief raised pack append .os.sopts.s2 \ .os.sopts.s2.l {left} .os.sopts.s2.e {left frame w} frame .os.sopts.s3 label .os.sopts.s3.l -text "directory:" -width $lwidth -anchor w entry .os.sopts.s3.e -width $ewidth -textvariable tko_directory \ -relief raised pack append .os.sopts.s3 \ .os.sopts.s3.l {left} .os.sopts.s3.e {left frame w} frame .os.sopts.s4 label .os.sopts.s4.l -text "cedit:" -width $lwidth -anchor w entry .os.sopts.s4.e -width $ewidth -textvariable tko_cedit \ -relief raised pack append .os.sopts.s4 \ .os.sopts.s4.l {left} .os.sopts.s4.e {left frame w} frame .os.sopts.s5 label .os.sopts.s5.l -text "filec:" -width $lwidth -anchor w entry .os.sopts.s5.e -width $ewidth -textvariable tko_filec \ -relief raised pack append .os.sopts.s5 \ .os.sopts.s5.l {left} .os.sopts.s5.e {left frame w} frame .os.sopts.s6 label .os.sopts.s6.l -text "msgcat:" -width $lwidth -anchor w entry .os.sopts.s6.e -width $ewidth -textvariable tko_msgcat \ -relief raised pack append .os.sopts.s6 \ .os.sopts.s6.l {left} .os.sopts.s6.e {left frame w} frame .os.sopts.s7 label .os.sopts.s7.l -text "noprint:" -width $lwidth -anchor w entry .os.sopts.s7.e -width $ewidth -textvariable tko_noprint \ -relief raised pack append .os.sopts.s7 \ .os.sopts.s7.l {left} .os.sopts.s7.e {left frame w} frame .os.sopts.s8 label .os.sopts.s8.l -text "paragraphs:" -width $lwidth -anchor w entry .os.sopts.s8.e -width $ewidth -textvariable tko_paragraphs \ -relief raised pack append .os.sopts.s8 \ .os.sopts.s8.l {left} .os.sopts.s8.e {left frame w} frame .os.sopts.s9 label .os.sopts.s9.l -text "print:" -width $lwidth -anchor w entry .os.sopts.s9.e -width $ewidth -textvariable tko_print \ -relief raised pack append .os.sopts.s9 \ .os.sopts.s9.l {left} .os.sopts.s9.e {left frame w} frame .os.sopts.s10 label .os.sopts.s10.l -text "recdir:" -width $lwidth -anchor w entry .os.sopts.s10.e -width $ewidth -textvariable tko_recdir \ -relief raised pack append .os.sopts.s10 \ .os.sopts.s10.l {left} .os.sopts.s10.e {left frame w} frame .os.sopts.s11 label .os.sopts.s11.l -text "sections:" -width $lwidth -anchor w entry .os.sopts.s11.e -width $ewidth -textvariable tko_sections \ -relief raised pack append .os.sopts.s11 \ .os.sopts.s11.l {left} .os.sopts.s11.e {left frame w} frame .os.sopts.s12 label .os.sopts.s12.l -text "shell:" -width $lwidth -anchor w entry .os.sopts.s12.e -width $ewidth -textvariable tko_shell \ -relief raised pack append .os.sopts.s12 \ .os.sopts.s12.l {left} .os.sopts.s12.e {left frame w} frame .os.sopts.s13 label .os.sopts.s13.l -text "shellmeta:" -width $lwidth -anchor w entry .os.sopts.s13.e -width $ewidth -textvariable tko_shellmeta \ -relief raised pack append .os.sopts.s13 \ .os.sopts.s13.l {left} .os.sopts.s13.e {left frame w} frame .os.sopts.s14 label .os.sopts.s14.l -text "tags:" -width $lwidth -anchor w entry .os.sopts.s14.e -width $ewidth -textvariable tko_tags \ -relief raised pack append .os.sopts.s14 \ .os.sopts.s14.l {left} .os.sopts.s14.e {left frame w} frame .os.sopts.s15 label .os.sopts.s15.l -text "term:" -width $lwidth -anchor w entry .os.sopts.s15.e -width $ewidth -textvariable tko_term \ -relief raised pack append .os.sopts.s15 \ .os.sopts.s15.l {left} .os.sopts.s15.e {left frame w} pack append .os.sopts \ .os.sopts.s1 {top expand fillx} \ .os.sopts.s2 {top expand fillx} \ .os.sopts.s3 {top expand fillx} \ .os.sopts.s4 {top expand fillx} \ .os.sopts.s5 {top expand fillx} \ .os.sopts.s6 {top expand fillx} \ .os.sopts.s7 {top expand fillx} \ .os.sopts.s8 {top expand fillx} \ .os.sopts.s9 {top expand fillx} \ .os.sopts.s10 {top expand fillx} \ .os.sopts.s11 {top expand fillx} \ .os.sopts.s12 {top expand fillx} \ .os.sopts.s13 {top expand fillx} \ .os.sopts.s14 {top expand fillx} \ .os.sopts.s15 {top expand fillx} # Build frame for continue button. frame .os.control -bd 4 button .os.control.quit -text "Continue" -command "destroy .os" bind .os ".os.control.quit flash; destroy .os" pack append .os.control .os.control.quit {left} # Pack everything together. pack append .os \ .os.bopts {top} \ .os.control {bottom fillx} \ .os.nopts {left fillx padx 4m pady 4m} \ .os.sopts {left fillx pady 4m} grab .os focus .os } # tk_opt_ew -- # Handle a change to an option entry widget. proc tk_opt_ew {name element op} { upvar $name x tk_opt_set "$name=$x" } # tk_err -- # Display a Tcl/Tk error message. proc tk_err {msg} { tk_dialog .d {} "$msg" {} 0 Continue #puts "msg: $msg" } # tk_addstr -- # Add a string to the screen. proc tk_addstr {len str} { global tk_cursor_row global tk_cursor_col # Delete the current characters, then insert the new ones. .t mark set insert $tk_cursor_row.$tk_cursor_col .t delete insert "insert + $len chars" .t insert insert "$str" incr tk_cursor_col $len #puts "tk_addstr: row $tk_cursor_row col $tk_cursor_col: insert $str" } # tk_clrtoeol -- # Clear to the end of the line. proc tk_clrtoeol {} { global tk_cursor_row global tk_cursor_col global tk_ssize_col # Overwrite to the end of the line with spaces. .t mark set insert $tk_cursor_row.$tk_cursor_col .t delete insert "insert lineend" for {set j $tk_cursor_col} {$j < $tk_ssize_col} {incr j} { .t insert insert " " } #puts "tk_clrtoel: row $tk_cursor_row col $tk_cursor_col" } # tk_deleteln -- # Delete the line. proc tk_deleteln {} { global tk_cursor_row global tk_cursor_col global tk_ssize_col # Delete the line. .t mark set insert $tk_cursor_row.$tk_cursor_col .t delete insert "insert lineend + 1 chars" # Append a new, blank line at the end of the screen. .t mark set insert end for {set j 1} {$j <= $tk_ssize_col} {incr j} { .t insert insert " " } .t insert insert "\n" #puts "tk_deleteln: row $tk_cursor_row" } # tk_flash -- # Flash the screen. proc tk_flash {} { set bg [lindex [.t config -background] 4] set fg [lindex [.t config -foreground] 4] .t configure -background $fg -foreground $bg update idletasks .t configure -background $bg -foreground $fg update idletasks } # tk_insertln -- # Insert the line. proc tk_insertln {} { global tk_cursor_row global tk_cursor_col global tk_ssize_row global tk_ssize_col # Delete the last line on the screen. .t mark set insert $tk_ssize_row.0 .t delete insert "insert lineend + 1 chars" # Insert a new, blank line. .t mark set insert $tk_cursor_row.$tk_cursor_col for {set j 1} {$j <= $tk_ssize_col} {incr j} { .t insert insert " " } .t insert insert "\n" #puts "tk_insertln: row $tk_cursor_row" } # tk_move -- # Move the cursor. proc tk_move {row col} { global tk_cursor_row global tk_cursor_col # Convert to Tcl/Tk coordinates, update the insert cursor. set tk_cursor_row [ expr $row + 1 ] set tk_cursor_col $col .t mark set insert $tk_cursor_row.$tk_cursor_col # Update the screen cursor. .t tag remove tk_cursor tk_cursor_indx .t mark set tk_cursor_indx insert .t tag add tk_cursor tk_cursor_indx #puts "tk_move: row $tk_cursor_row col $tk_cursor_col" } # tk_rename -- # Rename the screen. proc tk_rename {name} { wm title . "$name" } # tk_ssize -- # Return the window size. proc tk_ssize {} { global tk_ssize_col global tk_ssize_row set s [ .t configure -width ] set tk_ssize_col [ lindex $s [ expr [ llength $s ] -1 ] ] set s [ .t configure -height ] set tk_ssize_row [ lindex $s [ expr [ llength $s ] -1 ] ] #puts "tk_ssize: rows $tk_ssize_row, cols $tk_ssize_col" } # tk_standout -- # Change into standout mode. proc tk_standout {} { } # tk_standend -- # Change out of standout mode. proc tk_standend {} { } # Cursor set tk_cursor_row 1 set tk_cursor_col 0 # Screen size set tk_ssize_row 0 set tk_ssize_col 0 screen #tkwait window . vigor-0.016.orig/tk/tk_main.c0100644000076400007640000002240407103707246014502 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)tk_main.c 8.18 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "tki.h" #include "pathnames.h" GS *__global_list; /* GLOBAL: List of screens. */ sigset_t __sigblockset; /* GLOBAL: Blocked signals. */ static GS *gs_init __P((char *)); static void killsig __P((SCR *)); static void perr __P((char *, char *)); static void sig_end __P((GS *)); static int sig_init __P((GS *)); static int tcl_init __P((GS *)); static void tcl_err __P((TK_PRIVATE *)); /* * main -- * This is the main loop for the standalone Tcl/Tk editor. */ int main(argc, argv) int argc; char *argv[]; { static int reenter; GS *gp; TK_PRIVATE *tkp; size_t rows, cols; int rval; char **p_av, **t_av, *script; /* If loaded at 0 and jumping through a NULL pointer, stop. */ if (reenter++) abort(); /* Create and initialize the global structure. */ __global_list = gp = gs_init(argv[0]); /* Initialize Tk/Tcl. */ if (tcl_init(gp)) exit (1); /* * Strip out any arguments that the common editor doesn't understand * (i.e. the Tk/Tcl arguments). Search for -i first, it's the Tk/Tcl * startup script and needs to be run first. * * XXX * There's no way to portably call getopt twice. */ script = "init.tcl"; for (p_av = t_av = argv;;) { if (*t_av == NULL) { *p_av = NULL; break; } if (!strcmp(*t_av, "--")) { while ((*p_av++ = *t_av++) != NULL); break; } if (!memcmp(*t_av, "-i", sizeof("-i") - 1)) { if (t_av[0][2] != '\0') { script = t_av[0] + 2; ++t_av; --argc; continue; } if (t_av[1] != NULL) { script = t_av[1]; t_av += 2; argc -= 2; continue; } } *p_av++ = *t_av++; } for (p_av = t_av = argv;;) { if (*t_av == NULL) { *p_av = NULL; break; } if (!strcmp(*t_av, "--")) { while ((*p_av++ = *t_av++) != NULL); break; } if (t_av[1] != NULL && (!memcmp(*t_av, "-background", sizeof("-background") - 1) || !memcmp(*t_av, "-bg", sizeof("-bg") - 1) || !memcmp(*t_av, "-borderwidth", sizeof("-borderwidth") - 1)|| !memcmp(*t_av, "-bd", sizeof("-bd") - 1) || !memcmp(*t_av, "-foreground", sizeof("-foreground") - 1) || !memcmp(*t_av, "-fg", sizeof("-fg") - 1) || !memcmp(*t_av, "-font", sizeof("-font") - 1))) { if (Tcl_VarEval(tkp->interp, ".t configure ", t_av[0], " ", t_av[1], NULL) == TCL_ERROR) tcl_err(tkp); t_av += 2; argc -= 2; continue; } if (!memcmp(*t_av, "-geometry", sizeof("-geometry") - 1)) { if (Tcl_VarEval(tkp->interp, "wm geometry . ", *t_av + sizeof("-geometry") - 1, NULL) == TCL_ERROR) tcl_err(tkp); ++t_av; --argc; continue; } *p_av++ = *t_av++; } /* Load the initial Tcl/Tk script. */ tkp = GTKP(gp); if (Tcl_EvalFile(tkp->interp, script) == TCL_ERROR) tcl_err(tkp); /* Add the terminal type to the global structure. */ if ((OG_D_STR(gp, GO_TERM) = OG_STR(gp, GO_TERM) = strdup("tkterm")) == NULL) perr(gp->progname, NULL); /* Figure out how big the screen is. */ if (tk_ssize(NULL, 0, &rows, &cols, NULL)) exit (1); /* Add the rows and columns to the global structure. */ OG_VAL(gp, GO_LINES) = OG_D_VAL(gp, GO_LINES) = rows; OG_VAL(gp, GO_COLUMNS) = OG_D_VAL(gp, GO_COLUMNS) = cols; /* Start catching signals. */ if (sig_init(gp)) exit (1); /* Run ex/vi. */ rval = editor(gp, argc, argv); /* Clean up signals. */ sig_end(gp); /* Clean up the terminal. */ (void)tk_quit(gp); /* If a killer signal arrived, pretend we just got it. */ if (tkp->killersig) { (void)signal(tkp->killersig, SIG_DFL); (void)kill(getpid(), tkp->killersig); /* NOTREACHED */ } /* Free the global and TK private areas. */ #if defined(DEBUG) || defined(PURIFY) || defined(LIBRARY) free(tkp); free(gp); #endif exit (rval); } /* * gs_init -- * Create and partially initialize the GS structure. */ static GS * gs_init(name) char *name; { TK_PRIVATE *tkp; GS *gp; int fd; char *p; /* Figure out what our name is. */ if ((p = strrchr(name, '/')) != NULL) name = p + 1; /* Allocate the global structure. */ CALLOC_NOMSG(NULL, gp, GS *, 1, sizeof(GS)); /* Allocate the CL private structure. */ if (gp != NULL) CALLOC_NOMSG(NULL, tkp, TK_PRIVATE *, 1, sizeof(TK_PRIVATE)); if (gp == NULL || tkp == NULL) perr(name, NULL); gp->tk_private = tkp; TAILQ_INIT(&tkp->evq); /* Initialize the list of curses functions. */ gp->scr_addstr = tk_addstr; gp->scr_attr = tk_attr; gp->scr_baud = tk_baud; gp->scr_bell = tk_bell; gp->scr_busy = NULL; gp->scr_clrtoeol = tk_clrtoeol; gp->scr_cursor = tk_cursor; gp->scr_deleteln = tk_deleteln; gp->scr_event = tk_event; gp->scr_ex_adjust = tk_ex_adjust; gp->scr_fmap = tk_fmap; gp->scr_insertln = tk_insertln; gp->scr_keyval = tk_keyval; gp->scr_move = tk_move; gp->scr_msg = NULL; gp->scr_optchange = tk_optchange; gp->scr_refresh = tk_refresh; gp->scr_rename = tk_rename; gp->scr_screen = tk_screen; gp->scr_suspend = tk_suspend; gp->scr_usage = tk_usage; /* * We expect that if we've lost our controlling terminal that the * open() (but not the tcgetattr()) will fail. */ if (isatty(STDIN_FILENO)) { if (tcgetattr(STDIN_FILENO, &tkp->orig) == -1) goto tcfail; } else if ((fd = open(_PATH_TTY, O_RDONLY, 0)) != -1) { if (tcgetattr(fd, &tkp->orig) == -1) tcfail: perr(name, "tcgetattr"); (void)close(fd); } gp->progname = name; return (gp); } /* * tcl_init -- * Get Tcl/Tk up and running. */ static int tcl_init(gp) GS *gp; { TK_PRIVATE *tkp; tkp = GTKP(gp); if ((tkp->interp = Tcl_CreateInterp()) == NULL) tcl_err(tkp); /* XXX: Tk 4.1 has an incompatible change. */ #if (TK_MAJOR_VERSION == 4) && (TK_MINOR_VERSION == 0) if (Tk_CreateMainWindow(tkp->interp, NULL, "vi", "Vi") == NULL) tcl_err(tkp); #endif if (Tcl_Init(tkp->interp) == TCL_ERROR) tcl_err(tkp); if (Tk_Init(tkp->interp) == TCL_ERROR) tcl_err(tkp); /* Shared variables. */ (void)Tcl_LinkVar(tkp->interp, "tk_cursor_row", (char *)&tkp->tk_cursor_row, TCL_LINK_INT); (void)Tcl_LinkVar(tkp->interp, "tk_cursor_col", (char *)&tkp->tk_cursor_col, TCL_LINK_INT); (void)Tcl_LinkVar(tkp->interp, "tk_ssize_row", (char *)&tkp->tk_ssize_row, TCL_LINK_INT); (void)Tcl_LinkVar(tkp->interp, "tk_ssize_col", (char *)&tkp->tk_ssize_col, TCL_LINK_INT); /* Functions called by Tcl script. */ Tcl_CreateCommand(tkp->interp, "tk_key", tk_key, tkp, NULL); Tcl_CreateCommand(tkp->interp, "tk_op", tk_op, tkp, NULL); Tcl_CreateCommand(tkp->interp, "tk_opt_init", tk_opt_init, tkp, NULL); Tcl_CreateCommand(tkp->interp, "tk_opt_set", tk_opt_set, tkp, NULL); Tcl_CreateCommand(tkp->interp, "tk_version", tk_version, tkp, NULL); /* Other initialization. */ if (Tcl_Eval(tkp->interp, "wm geometry . =80x28+0+0") == TCL_ERROR) tcl_err(tkp); return (0); } /* * tcl_err -- * Tcl/Tk error message during initialization. */ static void tcl_err(tkp) TK_PRIVATE *tkp; { (void)fprintf(stderr, "%s\n", tkp->interp->result != NULL ? tkp->interp->result : "Tcl/Tk: initialization error"); (void)tk_usage(); exit (1); } #define GLOBAL_TKP \ TK_PRIVATE *tkp = GTKP(__global_list); static void h_hup(signo) int signo; { GLOBAL_TKP; F_SET(tkp, TK_SIGHUP); tkp->killersig = SIGHUP; } static void h_int(signo) int signo; { GLOBAL_TKP; F_SET(tkp, TK_SIGINT); } static void h_term(signo) int signo; { GLOBAL_TKP; F_SET(tkp, TK_SIGTERM); tkp->killersig = SIGTERM; } static void h_winch(signo) int signo; { GLOBAL_TKP; F_SET(tkp, TK_SIGWINCH); } #undef GLOBAL_TKP /* * sig_init -- * Initialize signals. */ static int sig_init(gp) GS *gp; { TK_PRIVATE *tkp; struct sigaction act; tkp = GTKP(gp); (void)sigemptyset(&__sigblockset); /* * Use sigaction(2), not signal(3), since we don't always want to * restart system calls. The example is when waiting for a command * mode keystroke and SIGWINCH arrives. Besides, you can't portably * restart system calls (thanks, POSIX!). */ #define SETSIG(signal, handler, off) { \ if (sigaddset(&__sigblockset, signal)) \ goto err; \ act.sa_handler = handler; \ sigemptyset(&act.sa_mask); \ act.sa_flags = 0; \ if (sigaction(signal, &act, &tkp->oact[off])) \ goto err; \ } #undef SETSIG return (0); err: perr(gp->progname, NULL); return (1); } /* * sig_end -- * End signal setup. */ static void sig_end(gp) GS *gp; { TK_PRIVATE *tkp; tkp = GTKP(gp); (void)sigaction(SIGHUP, NULL, &tkp->oact[INDX_HUP]); (void)sigaction(SIGINT, NULL, &tkp->oact[INDX_INT]); (void)sigaction(SIGTERM, NULL, &tkp->oact[INDX_TERM]); (void)sigaction(SIGWINCH, NULL, &tkp->oact[INDX_WINCH]); } /* * perr -- * Print system error. */ static void perr(name, msg) char *name, *msg; { (void)fprintf(stderr, "%s:", name); if (msg != NULL) (void)fprintf(stderr, "%s:", msg); (void)fprintf(stderr, "%s\n", strerror(errno)); exit(1); } vigor-0.016.orig/tk/tk_read.c0100644000076400007640000001017207103707246014470 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)tk_read.c 8.12 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../ex/script.h" #include "tki.h" static input_t tk_read __P((SCR *, int)); static int tk_resize __P((SCR *, size_t, size_t)); /* * tk_event -- * Return a single event. * * PUBLIC: int tk_event __P((SCR *, EVENT *, u_int32_t, int)); */ int tk_event(sp, evp, flags, timeout) SCR *sp; EVENT *evp; u_int32_t flags; int timeout; { EVENT *tevp; TK_PRIVATE *tkp; size_t lines, columns; int changed; /* * Queue signal based events. We never clear SIGHUP or SIGTERM events, * so that we just keep returning them until the editor dies. */ tkp = TKP(sp); sig: if (LF_ISSET(EC_INTERRUPT) || F_ISSET(tkp, TK_SIGINT)) { if (F_ISSET(tkp, TK_SIGINT)) { F_CLR(tkp, TK_SIGINT); evp->e_event = E_INTERRUPT; } else evp->e_event = E_TIMEOUT; return (0); } if (F_ISSET(tkp, TK_SIGHUP | TK_SIGTERM | TK_SIGWINCH)) { if (F_ISSET(tkp, TK_SIGHUP)) { evp->e_event = E_SIGHUP; return (0); } if (F_ISSET(tkp, TK_SIGTERM)) { evp->e_event = E_SIGTERM; return (0); } if (F_ISSET(tkp, TK_SIGWINCH)) { F_CLR(tkp, TK_SIGWINCH); (void)tk_ssize(sp, 1, &lines, &columns, &changed); if (changed) { (void)tk_resize(sp, lines, columns); evp->e_event = E_WRESIZE; return (0); } /* No change, so ignore the signal. */ } } /* Queue special ops. */ ops: if ((tevp = tkp->evq.tqh_first) != NULL) { *evp = *tevp; TAILQ_REMOVE(&tkp->evq, tevp, q); free(tevp); return (0); } /* Read input characters. */ switch (tk_read(sp, timeout)) { case INP_OK: evp->e_csp = tkp->ibuf; evp->e_len = tkp->ibuf_cnt; evp->e_event = E_STRING; tkp->ibuf_cnt = 0; break; case INP_EOF: evp->e_event = E_EOF; break; case INP_ERR: evp->e_event = E_ERR; break; case INP_INTR: goto sig; break; case INP_TIMEOUT: /* May have returned because queued a special op. */ if (tkp->evq.tqh_first != NULL) goto ops; /* Otherwise, we timed out. */ evp->e_event = E_TIMEOUT; break; default: abort(); } return (0); } /* * tk_read -- * Read characters from the input. */ static input_t tk_read(sp, timeout) SCR *sp; int timeout; { TK_PRIVATE *tkp; char buf[20]; /* * Check scripting window file descriptors. It's ugly that we wait * on scripting file descriptors here, but it's the only way to keep * from locking out scripting windows. */ if (F_ISSET(sp->gp, G_SCRWIN) && sscr_input(sp)) return (INP_ERR); /* Read characters. */ tkp = TKP(sp); (void)snprintf(buf, sizeof(buf), "%d", timeout); (void)Tcl_VarEval(tkp->interp, "tk_key_wait ", buf, NULL); return (tkp->ibuf_cnt == 0 ? INP_TIMEOUT : INP_OK); } /* * tk_key -- * Receive an input key. * * PUBLIC: int tk_key __P((ClientData, Tcl_Interp *, int, char *[])); */ int tk_key(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char *argv[]; { TK_PRIVATE *tkp; u_int8_t *p, *t; tkp = (TK_PRIVATE *)clientData; for (p = tkp->ibuf + tkp->ibuf_cnt, t = argv[1]; (*p++ = *t++) != '\0'; ++tkp->ibuf_cnt); return (TCL_OK); } /* * tk_resize -- * Reset the options for a resize event. */ static int tk_resize(sp, lines, columns) SCR *sp; size_t lines, columns; { ARGS *argv[2], a, b; int rval; char b1[1024]; a.bp = b1; b.bp = NULL; a.len = b.len = 0; argv[0] = &a; argv[1] = &b; (void)snprintf(b1, sizeof(b1), "lines=%lu", (u_long)lines); a.len = strlen(b1); if (opts_set(sp, argv, NULL)) return (1); (void)snprintf(b1, sizeof(b1), "columns=%lu", (u_long)columns); a.len = strlen(b1); if (opts_set(sp, argv, NULL)) return (1); return (0); } vigor-0.016.orig/tk/tk_screen.c0100644000076400007640000000271507103707246015040 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)tk_screen.c 8.9 (Berkeley) 5/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "tki.h" /* * tk_screen -- * Initialize/shutdown the Tcl/Tk screen. * * PUBLIC: int tk_screen __P((SCR *, u_int32_t)); */ int tk_screen(sp, flags) SCR *sp; u_int32_t flags; { TK_PRIVATE *tkp; tkp = TKP(sp); /* See if we're already in the right mode. */ if (LF_ISSET(SC_VI) && F_ISSET(sp, SC_SCR_VI)) return (0); /* Ex isn't possible. */ if (LF_ISSET(SC_EX)) return (1); /* Initialize terminal based information. */ if (tk_term_init(sp)) return (1); /* Put up the first file name. */ if (tk_rename(sp)) return (1); F_SET(tkp, TK_SCR_VI_INIT); return (0); } /* * tk_quit -- * Shutdown the screens. * * PUBLIC: int tk_quit __P((GS *)); */ int tk_quit(gp) GS *gp; { TK_PRIVATE *tkp; int rval; /* Clean up the terminal mappings. */ rval = tk_term_end(gp); tkp = GTKP(gp); F_CLR(tkp, TK_SCR_VI_INIT); return (rval); } vigor-0.016.orig/tk/tk_term.c0100644000076400007640000000652207103707246014530 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)tk_term.c 8.12 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "tki.h" /* * tk_term_init -- * Initialize the terminal special keys. * * PUBLIC: int tk_term_init __P((SCR *)); */ int tk_term_init(sp) SCR *sp; { SEQ *qp; /* * Rework any function key mappings that were set before the * screen was initialized. */ for (qp = sp->gp->seqq.lh_first; qp != NULL; qp = qp->q.le_next) if (F_ISSET(qp, SEQ_FUNCMAP)) (void)tk_fmap(sp, qp->stype, qp->input, qp->ilen, qp->output, qp->olen); return (0); } /* * tk_term_end -- * End the special keys defined by the termcap/terminfo entry. * * PUBLIC: int tk_term_end __P((GS *)); */ int tk_term_end(gp) GS *gp; { SEQ *qp, *nqp; /* Delete screen specific mappings. */ for (qp = gp->seqq.lh_first; qp != NULL; qp = nqp) { nqp = qp->q.le_next; if (F_ISSET(qp, SEQ_SCREEN)) (void)seq_mdel(qp); } return (0); } /* * tk_fmap -- * Map a function key. * * PUBLIC: int tk_fmap __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); */ int tk_fmap(sp, stype, from, flen, to, tlen) SCR *sp; seq_t stype; CHAR_T *from, *to; size_t flen, tlen; { VI_INIT_IGNORE(sp); /* Bind a Tk/Tcl function key to a string sequence. */ return (0); } /* * tk_optchange -- * Curses screen specific "option changed" routine. * * PUBLIC: int tk_optchange __P((SCR *, int, char *, u_long *)); */ int tk_optchange(sp, opt, str, valp) SCR *sp; int opt; char *str; u_long *valp; { switch (opt) { case O_COLUMNS: case O_LINES: /* * Changing the columns or lines require that we restart * the screen. */ F_SET(sp->gp, G_SRESTART); F_CLR(sp, SC_SCR_EX | SC_SCR_VI); break; case O_TERM: msgq(sp, M_ERR, "The screen type may not be changed"); return (1); } return (0); } /* * tk_ssize -- * Return the window size. * * PUBLIC: int tk_ssize __P((SCR *, int, size_t *, size_t *, int *)); */ int tk_ssize(sp, sigwinch, rowp, colp, changedp) SCR *sp; int sigwinch; size_t *rowp, *colp; int *changedp; { TK_PRIVATE *tkp; tkp = GTKP(__global_list); (void)Tcl_Eval(tkp->interp, "tk_ssize"); /* * SunOS systems deliver SIGWINCH when windows are uncovered * as well as when they change size. In addition, we call * here when continuing after being suspended since the window * may have changed size. Since we don't want to background * all of the screens just because the window was uncovered, * ignore the signal if there's no change. * * !!! * sp may be NULL. */ if (sigwinch && sp != NULL && tkp->tk_ssize_row == O_VAL(sp, O_LINES) && tkp->tk_ssize_col == O_VAL(sp, O_COLUMNS)) { if (changedp != NULL) *changedp = 0; return (0); } if (rowp != NULL) *rowp = tkp->tk_ssize_row; if (colp != NULL) *colp = tkp->tk_ssize_col; if (changedp != NULL) *changedp = 1; return (0); } vigor-0.016.orig/tk/tk_util.c0100644000076400007640000001144607103707246014537 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)tk_util.c 8.14 (Berkeley) 7/19/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "tki.h" static int tk_op_push __P((SCR *, TK_PRIVATE *, e_event_t)); /* * tk_op -- * Events provided directly from Tcl/Tk. * * PUBLIC: int tk_op __P((ClientData, Tcl_Interp *, int, char *[])); */ int tk_op(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char *argv[]; { SCR *sp; TK_PRIVATE *tkp; sp = __global_list->dq.cqh_first; /* XXX */ tkp = (TK_PRIVATE *)clientData; switch (argv[1][0]) { case 'q': if (!strcmp(argv[1], "quit")) return (tk_op_push(sp, tkp, E_QUIT)); break; case 'w': if (!strcmp(argv[1], "write")) return (tk_op_push(sp, tkp, E_WRITE)); if (!strcmp(argv[1], "writequit")) { if (tk_op_push(sp, tkp, E_WRITE) != TCL_OK) return (TCL_ERROR); if (tk_op_push(sp, tkp, E_QUIT) != TCL_OK) return (TCL_ERROR); return (TCL_OK); } break; } (void)Tcl_VarEval(tkp->interp, "tk_err {", argv[1], ": unknown event", "}", NULL); return (TCL_OK); } /* * tk_op_push -- * Push an event. */ static int tk_op_push(sp, tkp, et) SCR *sp; TK_PRIVATE *tkp; e_event_t et; { EVENT *evp; CALLOC(sp, evp, EVENT *, 1, sizeof(EVENT)); if (evp == NULL) return (TCL_ERROR); evp->e_event = et; TAILQ_INSERT_TAIL(&tkp->evq, evp, q); return (TCL_OK); } /* * tk_opt_init -- * Initialize the values of the current options. * * PUBLIC: int tk_opt_init __P((ClientData, Tcl_Interp *, int, char *[])); */ int tk_opt_init(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char *argv[]; { OPTLIST const *op; SCR *sp; TK_PRIVATE *tkp; int off; char buf[20]; sp = __global_list->dq.cqh_first; /* XXX */ tkp = (TK_PRIVATE *)clientData; for (op = optlist, off = 0; op->name != NULL; ++op, ++off) { if (F_ISSET(op, OPT_NDISP)) continue; switch (op->type) { case OPT_0BOOL: case OPT_1BOOL: (void)Tcl_VarEval(tkp->interp, "set tko_", op->name, O_ISSET(sp, off) ? " 1" : " 0", NULL); break; case OPT_NUM: (void)snprintf(buf, sizeof(buf), " %lu", O_VAL(sp, off)); (void)Tcl_VarEval(tkp->interp, "set tko_", op->name, buf, NULL); break; case OPT_STR: (void)Tcl_VarEval(tkp->interp, "set tko_", op->name, " {", O_STR(sp, off) == NULL ? "" : O_STR(sp, off), "}", NULL); break; } } return (TCL_OK); } /* * tk_opt_set -- * Set an options button. * * PUBLIC: int tk_opt_set __P((ClientData, Tcl_Interp *, int, char *[])); */ int tk_opt_set(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char *argv[]; { ARGS *ap[2], a, b; GS *gp; SCR *sp; int rval; void (*msg) __P((SCR *, mtype_t, char *, size_t)); char buf[64]; gp = __global_list; sp = gp->dq.cqh_first; /* XXX */ switch (argc) { case 2: a.bp = argv[1] + (sizeof("tko_") - 1); a.len = strlen(a.bp); break; case 3: a.bp = buf; a.len = snprintf(buf, sizeof(buf), "%s%s", atoi(argv[2]) ? "no" : "", argv[1]); break; default: abort(); } b.bp = NULL; b.len = 0; ap[0] = &a; ap[1] = &b; /* Use Tcl/Tk for error messages. */ msg = gp->scr_msg; gp->scr_msg = tk_msg; rval = opts_set(sp, ap, NULL); gp->scr_msg = msg; return (rval ? TCL_ERROR : TCL_OK); } /* * tk_version -- * Display the version in Tcl/Tk. * * PUBLIC: int tk_version __P((ClientData, Tcl_Interp *, int, char *[])); */ int tk_version(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char *argv[]; { EXCMD cmd; GS *gp; SCR *sp; int rval; void (*msg) __P((SCR *, mtype_t, char *, size_t)); gp = __global_list; sp = gp->dq.cqh_first; /* XXX */ msg = gp->scr_msg; gp->scr_msg = tk_msg; ex_cinit(&cmd, C_VERSION, 0, OOBLNO, OOBLNO, 0, NULL); rval = cmd.cmd->fn(sp, &cmd); (void)ex_fflush(sp); gp->scr_msg = msg; return (rval ? TCL_ERROR : TCL_OK); } /* * tk_msg -- * Display an error message in Tcl/Tk. * * PUBLIC: void tk_msg __P((SCR *, mtype_t, char *, size_t)); */ void tk_msg(sp, mtype, line, rlen) SCR *sp; mtype_t mtype; char *line; size_t rlen; { TK_PRIVATE *tkp; char buf[2048]; if (line == NULL) return; tkp = TKP(sp); (void)snprintf(buf, sizeof(buf), "%.*s", (int)rlen, line); (void)Tcl_VarEval(tkp->interp, "tk_err {", buf, "}", NULL); } vigor-0.016.orig/tk/tags0120777000076400007640000000000007107504605015763 2../build/tagsustar cjw44cjw44vigor-0.016.orig/tk/tki.h0100644000076400007640000000357507103707246013664 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)tki.h 8.6 (Berkeley) 4/27/96 */ #include #include typedef struct _tk_private { Tcl_Interp *interp;/* Tcl interpreter cookie. */ /* Shared variables. */ int tk_cursor_row; /* Current cursor row. */ int tk_cursor_col; /* Current cursor col. */ int tk_ssize_row; /* Screen rows. */ int tk_ssize_col; /* Screen columns. */ struct termios orig; /* Original terminal values. */ CHAR_T ibuf[64]; /* Input keys. */ int ibuf_cnt; /* Number of input keys. */ /* Event queue. */ TAILQ_HEAD(_eventh, _event) evq; int killersig; /* Killer signal. */ #define INDX_HUP 0 #define INDX_INT 1 #define INDX_TERM 2 #define INDX_WINCH 3 #define INDX_MAX 4 /* Original signal information. */ struct sigaction oact[INDX_MAX]; #define TK_LLINE_IV 0x0001 /* Last line is in inverse video. */ #define TK_SCR_VI_INIT 0x0002 /* Vi screen initialized. */ #define TK_SIGHUP 0x0004 /* SIGHUP arrived. */ #define TK_SIGINT 0x0008 /* SIGINT arrived. */ #define TK_SIGTERM 0x0010 /* SIGTERM arrived. */ #define TK_SIGWINCH 0x0020 /* SIGWINCH arrived. */ u_int16_t flags; } TK_PRIVATE; extern GS *__global_list; #define TKP(sp) ((TK_PRIVATE *)((sp)->gp->tk_private)) #define GTKP(gp) ((TK_PRIVATE *)gp->tk_private) /* Return possibilities from the keyboard read routine. */ typedef enum { INP_OK=0, INP_EOF, INP_ERR, INP_INTR, INP_TIMEOUT } input_t; /* The screen line relative to a specific window. */ #define RLNO(sp, lno) (sp)->woff + (lno) /* Some functions can be safely ignored until the screen is running. */ #define VI_INIT_IGNORE(sp) \ if (F_ISSET(sp, SC_VI) && !F_ISSET(TKP(sp), TK_SCR_VI_INIT)) \ return (0); #include "tk_extern.h" vigor-0.016.orig/tk/tk_funcs.c0100644000076400007640000001336307103707246014700 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)tk_funcs.c 8.11 (Berkeley) 9/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #include "tki.h" /* * tk_addstr -- * Add len bytes from the string at the cursor, advancing the cursor. * * PUBLIC: int tk_addstr __P((SCR *, const char *, size_t)); */ int tk_addstr(sp, str, len) SCR *sp; const char *str; size_t len; { TK_PRIVATE *tkp; int iv; char buf[20]; iv = 0; tkp = TKP(sp); if (iv) (void)Tcl_Eval(tkp->interp, "tk_standout"); (void)snprintf(buf, sizeof(buf), "%d ", (int)len); if ((Tcl_VarEval(tkp->interp, "tk_addstr ", buf, "{", str, "}", NULL) != TCL_OK)) return (1); if (iv) (void)Tcl_Eval(tkp->interp, "tk_standend"); return (0); } /* * tk_attr -- * Toggle a screen attribute on/off. * * PUBLIC: int tk_attr __P((SCR *, scr_attr_t, int)); */ int tk_attr(sp, attribute, on) SCR *sp; scr_attr_t attribute; int on; { TK_PRIVATE *tkp; tkp = TKP(sp); switch (attribute) { case SA_ALTERNATE: /* No alternate screen. */ break; case SA_INVERSE: if (on) (void)Tcl_Eval(tkp->interp, "tk_standout"); else (void)Tcl_Eval(tkp->interp, "tk_standend"); break; default: abort(); } return (0); } /* * tk_baud -- * Return the baud rate. * * PUBLIC: int tk_baud __P((SCR *, u_long *)); */ int tk_baud(sp, ratep) SCR *sp; u_long *ratep; { *ratep = 9600; return (0); } /* * tk_bell -- * Ring the bell/flash the screen. * * PUBLIC: int tk_bell __P((SCR *)); */ int tk_bell(sp) SCR *sp; { TK_PRIVATE *tkp; tkp = TKP(sp); return (Tcl_Eval(tkp->interp, "tk_flash") != TCL_OK); } /* * tk_clrtoeol -- * Clear from the current cursor to the end of the line. * * PUBLIC: int tk_clrtoeol __P((SCR *)); */ int tk_clrtoeol(sp) SCR *sp; { TK_PRIVATE *tkp; tkp = TKP(sp); return (Tcl_Eval(tkp->interp, "tk_clrtoeol") != TCL_OK); } /* * tk_cursor -- * Return the current cursor position. * * PUBLIC: int tk_cursor __P((SCR *, size_t *, size_t *)); */ int tk_cursor(sp, yp, xp) SCR *sp; size_t *yp, *xp; { TK_PRIVATE *tkp; tkp = TKP(sp); *yp = (tkp->tk_cursor_row - 1) - sp->woff; *xp = tkp->tk_cursor_col; return (0); } /* * tk_deleteln -- * Delete the current line, scrolling all lines below it. * * PUBLIC: int tk_deleteln __P((SCR *)); */ int tk_deleteln(sp) SCR *sp; { TK_PRIVATE *tkp; tkp = TKP(sp); return (Tcl_Eval(tkp->interp, "tk_deleteln") != TCL_OK); } /* * tk_ex_adjust -- * Adjust the screen for ex. * * PUBLIC: int tk_ex_adjust __P((SCR *, exadj_t)); */ int tk_ex_adjust(sp, action) SCR *sp; exadj_t action; { abort(); /* NOTREACHED */ } /* * tk_insertln -- * Push down the current line, discarding the bottom line. * * PUBLIC: int tk_insertln __P((SCR *)); */ int tk_insertln(sp) SCR *sp; { TK_PRIVATE *tkp; tkp = TKP(sp); return (Tcl_Eval(tkp->interp, "tk_insertln") != TCL_OK); } /* * tk_keyval -- * Return the value for a special key. * * PUBLIC: int tk_keyval __P((SCR *, scr_keyval_t, CHAR_T *, int *)); */ int tk_keyval(sp, val, chp, dnep) SCR *sp; scr_keyval_t val; CHAR_T *chp; int *dnep; { TK_PRIVATE *tkp; /* * VEOF, VERASE and VKILL are required by POSIX 1003.1-1990, * VWERASE is a 4BSD extension. */ tkp = TKP(sp); switch (val) { case KEY_VEOF: *dnep = (*chp = tkp->orig.c_cc[VEOF]) == _POSIX_VDISABLE; break; case KEY_VERASE: *dnep = (*chp = tkp->orig.c_cc[VERASE]) == _POSIX_VDISABLE; break; case KEY_VKILL: *dnep = (*chp = tkp->orig.c_cc[VKILL]) == _POSIX_VDISABLE; break; #ifdef VWERASE case KEY_VWERASE: *dnep = (*chp = tkp->orig.c_cc[VWERASE]) == _POSIX_VDISABLE; break; #endif default: *dnep = 1; break; } return (0); } /* * tk_move -- * Move the cursor. * * PUBLIC: int tk_move __P((SCR *, size_t, size_t)); */ int tk_move(sp, lno, cno) SCR *sp; size_t lno, cno; { TK_PRIVATE *tkp; char buf[40]; (void)snprintf(buf, sizeof(buf), "%d %d", RLNO(sp, lno), cno); tkp = TKP(sp); return (Tcl_VarEval(tkp->interp, "tk_move ", buf, NULL) != TCL_OK); } /* * tk_refresh -- * Refresh the screen. * * PUBLIC: int tk_refresh __P((SCR *, int)); */ int tk_refresh(sp, repaint) SCR *sp; int repaint; { TK_PRIVATE *tkp; /* * If repaint is set, the editor is telling us that we don't know * what's on the screen, so we have to repaint from scratch. * * XXX * I have no idea how to do this in Tk. My guess is that we have * to delete all of the text and call the editor with an E_REPAINT * event. */ if (repaint) { } tkp = TKP(sp); return (Tcl_Eval(tkp->interp, "update idletasks") != TCL_OK); } /* * tk_rename -- * Rename the file. * * PUBLIC: int tk_rename __P((SCR *)); */ int tk_rename(sp) SCR *sp; { TK_PRIVATE *tkp; tkp = TKP(sp); return (Tcl_VarEval(tkp->interp, "tk_rename ", sp->frp->name, NULL) != TCL_OK); } /* * tk_suspend -- * Suspend a screen. * * PUBLIC: int tk_suspend __P((SCR *, int *)); */ int tk_suspend(sp, allowedp) SCR *sp; int *allowedp; { *allowedp = 0; return (0); } /* * tk_usage -- * Print out the Tk/Tcl usage messages. * * PUBLIC: void tk_usage __P((void)); */ void tk_usage() { #define USAGE "\ usage: tkvi [-eFlRrSv] [-c command] [-bg color] [-fg color]\n\ [-geometry widthxheight+x+y] [-i script] [-t tag] [-w size]\n\ [file ...]\n" (void)fprintf(stderr, "%s", USAGE); #undef USAGE } vigor-0.016.orig/tcl_api/0040755000076400007640000000000007103707315013707 5ustar cjw44cjw44vigor-0.016.orig/tcl_api/tags0120777000076400007640000000000007107504605016760 2../build/tagsustar cjw44cjw44vigor-0.016.orig/tcl_api/tcl.c0100644000076400007640000004250307103707246014641 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995 * Keith Bostic. All rights reserved. * Copyright (c) 1995 * George V. Neville-Neil. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)tcl.c 8.16 (Berkeley) 10/16/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "tcl_extern.h" static int getint __P((Tcl_Interp *, char *, char *, int *)); static int getscreenid __P((Tcl_Interp *, SCR **, char *, char *)); static void msghandler __P((SCR *, mtype_t, char *, size_t)); extern GS *__global_list; /* XXX */ /* * INITMESSAGE -- * Macros to point messages at the Tcl message handler. */ #define INITMESSAGE \ scr_msg = __global_list->scr_msg; \ __global_list->scr_msg = msghandler; #define ENDMESSAGE \ __global_list->scr_msg = scr_msg; /* * tcl_fscreen -- * Return the screen id associated with file name. * * Tcl Command: viFindScreen * Usage: viFindScreen file */ static int tcl_fscreen(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; if (argc != 2) { Tcl_SetResult(interp, "Usage: viFindScreen file", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, NULL, argv[1])) return (TCL_ERROR); (void)sprintf(interp->result, "%d", sp->id); return (TCL_OK); } /* * tcl_aline -- * -- Append the string text after the line in lineNumber. * * Tcl Command: viAppendLine * Usage: viAppendLine screenId lineNumber text */ static int tcl_aline(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int lno, rval; if (argc != 4) { Tcl_SetResult(interp, "Usage: viAppendLine screenId lineNumber text", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL) || getint(interp, "line number", argv[2], &lno)) return (TCL_ERROR); INITMESSAGE; rval = api_aline(sp, (recno_t)lno, argv[3], strlen(argv[3])); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_dline -- * Delete lineNum. * * Tcl Command: viDelLine * Usage: viDelLine screenId lineNum */ static int tcl_dline(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int lno, rval; if (argc != 3) { Tcl_SetResult(interp, "Usage: viDelLine screenId lineNumber", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL) || getint(interp, "line number", argv[2], &lno)) return (TCL_ERROR); INITMESSAGE; rval = api_dline(sp, (recno_t)lno); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_gline -- * Return lineNumber. * * Tcl Command: viGetLine * Usage: viGetLine screenId lineNumber */ static int tcl_gline(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; size_t len; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int lno, rval; char *line, *p; if (argc != 3) { Tcl_SetResult(interp, "Usage: viGetLine screenId lineNumber", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL) || getint(interp, "line number", argv[2], &lno)) return (TCL_ERROR); INITMESSAGE; rval = api_gline(sp, (recno_t)lno, &p, &len); ENDMESSAGE; if (rval) return (TCL_ERROR); if ((line = malloc(len + 1)) == NULL) exit(1); /* XXX */ memmove(line, p, len); line[len] = '\0'; Tcl_SetResult(interp, line, TCL_DYNAMIC); return (TCL_OK); } /* * tcl_iline -- * Insert the string text after the line in lineNumber. * * Tcl Command: viInsertLine * Usage: viInsertLine screenId lineNumber text */ static int tcl_iline(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int lno, rval; if (argc != 4) { Tcl_SetResult(interp, "Usage: viInsertLine screenId lineNumber text", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL) || getint(interp, "line number", argv[2], &lno)) return (TCL_ERROR); INITMESSAGE; rval = api_iline(sp, (recno_t)lno, argv[3], strlen(argv[3])); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_lline -- * Return the last line in the screen. * * Tcl Command: viLastLine * Usage: viLastLine screenId */ static int tcl_lline(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; recno_t last; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; if (argc != 2) { Tcl_SetResult(interp, "Usage: viLastLine screenId", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_lline(sp, &last); ENDMESSAGE; if (rval) return (TCL_ERROR); (void)sprintf(interp->result, "%lu", (unsigned long)last); return (TCL_OK); } /* * tcl_sline -- * Set lineNumber to the text supplied. * * Tcl Command: viSetLine * Usage: viSetLine screenId lineNumber text */ static int tcl_sline(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int lno, rval; if (argc != 4) { Tcl_SetResult(interp, "Usage: viSetLine screenId lineNumber text", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL) || getint(interp, "line number", argv[2], &lno)) return (TCL_ERROR); INITMESSAGE; rval = api_sline(sp, (recno_t)lno, argv[3], strlen(argv[3])); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_getmark -- * Return the mark's cursor position as a list with two elements. * {line, column}. * * Tcl Command: viGetMark * Usage: viGetMark screenId mark */ static int tcl_getmark(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { MARK cursor; SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char buf[20]; if (argc != 3) { Tcl_SetResult(interp, "Usage: viGetMark screenId mark", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_getmark(sp, (int)argv[2][0], &cursor); ENDMESSAGE; if (rval) return (TCL_ERROR); (void)snprintf(buf, sizeof(buf), "%lu", (u_long)cursor.lno); Tcl_AppendElement(interp, buf); (void)snprintf(buf, sizeof(buf), "%lu", (u_long)cursor.cno); Tcl_AppendElement(interp, buf); return (TCL_OK); } /* * tcl_setmark -- * Set the mark to the line and column numbers supplied. * * Tcl Command: viSetMark * Usage: viSetMark screenId mark line column */ static int tcl_setmark(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { MARK cursor; SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int i, rval; if (argc != 5) { Tcl_SetResult(interp, "Usage: viSetMark screenId mark line column", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); if (getint(interp, "line number", argv[3], &i)) return (TCL_ERROR); cursor.lno = i; if (getint(interp, "column number", argv[4], &i)) return (TCL_ERROR); cursor.cno = i; INITMESSAGE; rval = api_setmark(sp, (int)argv[2][0], &cursor); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_getcursor -- * Return the current cursor position as a list with two elements. * {line, column}. * * Tcl Command: viGetCursor * Usage: viGetCursor screenId */ static int tcl_getcursor(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { MARK cursor; SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char buf[20]; if (argc != 2) { Tcl_SetResult(interp, "Usage: viGetCursor screenId", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_getcursor(sp, &cursor); ENDMESSAGE; if (rval) return (TCL_ERROR); (void)snprintf(buf, sizeof(buf), "%lu", (u_long)cursor.lno); Tcl_AppendElement(interp, buf); (void)snprintf(buf, sizeof(buf), "%lu", (u_long)cursor.cno); Tcl_AppendElement(interp, buf); return (TCL_OK); } /* * tcl_setcursor -- * Set the cursor to the line and column numbers supplied. * * Tcl Command: viSetCursor * Usage: viSetCursor screenId line column */ static int tcl_setcursor(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { MARK cursor; SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int i, rval; if (argc != 4) { Tcl_SetResult(interp, "Usage: viSetCursor screenId line column", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); if (getint(interp, "screen id", argv[2], &i)) return (TCL_ERROR); cursor.lno = i; if (getint(interp, "screen id", argv[3], &i)) return (TCL_ERROR); cursor.cno = i; INITMESSAGE; rval = api_setcursor(sp, &cursor); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_msg -- * Set the message line to text. * * Tcl Command: viMsg * Usage: viMsg screenId text */ static int tcl_msg(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; if (argc != 3) { Tcl_SetResult(interp, "Usage: viMsg screenId text", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); api_imessage(sp, argv[2]); return (TCL_OK); } /* * tcl_iscreen -- * Create a new screen. If a filename is specified then the screen * is opened with that file. * * Tcl Command: viNewScreen * Usage: viNewScreen screenId [file] */ static int tcl_iscreen(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp, *nsp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; if (argc != 2 && argc != 3) { Tcl_SetResult(interp, "Usage: viNewScreen screenId [file]", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_edit(sp, argv[2], &nsp, 1); ENDMESSAGE; if (rval) return (TCL_ERROR); (void)sprintf(interp->result, "%d", nsp->id); return (TCL_OK); } /* * tcl_escreen -- * End a screen. * * Tcl Command: viEndScreen * Usage: viEndScreen screenId */ static int tcl_escreen(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; if (argc != 2) { Tcl_SetResult(interp, "Usage: viEndScreen screenId", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_escreen(sp); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_swscreen -- * Change the current focus to screen. * * Tcl Command: viSwitchScreen * Usage: viSwitchScreen screenId screenId */ static int tcl_swscreen(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp, *new; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; if (argc != 3) { Tcl_SetResult(interp, "Usage: viSwitchScreen cur_screenId new_screenId", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); if (getscreenid(interp, &new, argv[2], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_swscreen(sp, new); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_map -- * Associate a key with a tcl procedure. * * Tcl Command: viMapKey * Usage: viMapKey screenId key tclproc */ static int tcl_map(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char command[256]; if (argc != 4) { Tcl_SetResult(interp, "Usage: viMapKey screenId key tclproc", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; (void)snprintf(command, sizeof(command), ":tcl %s\n", argv[3]); rval = api_map(sp, argv[2], command, strlen(command)); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_unmap -- * Unmap a key. * * Tcl Command: viUnmapKey * Usage: viUnmMapKey screenId key */ static int tcl_unmap(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; if (argc != 3) { Tcl_SetResult(interp, "Usage: viUnmapKey screenId key", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_unmap(sp, argv[2]); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_opts_set -- * Set an option. * * Tcl Command: viSetOpt * Usage: viSetOpt screenId command */ static int tcl_opts_set(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char *setting; if (argc != 3) { Tcl_SetResult(interp, "Usage: viSetOpt screenId command", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; /*rval = api_opts_set(sp, argv[2]);*/ MALLOC(sp, setting, char *, strlen(argv[2])+6); strcpy(setting, ":set "); strcpy(setting+5, argv[2]); rval=api_run_str(sp, setting); free(setting); ENDMESSAGE; return (rval ? TCL_ERROR : TCL_OK); } /* * tcl_opts_get -- Return the value of an option. * * Tcl Command: viGetOpt * Usage: viGetOpt screenId option */ static int tcl_opts_get(clientData, interp, argc, argv) ClientData clientData; Tcl_Interp *interp; int argc; char **argv; { SCR *sp; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char *value; if (argc != 3) { Tcl_SetResult(interp, "Usage: viGetOpt screenId option", TCL_STATIC); return (TCL_ERROR); } if (getscreenid(interp, &sp, argv[1], NULL)) return (TCL_ERROR); INITMESSAGE; rval = api_opts_get(sp, argv[2], &value, NULL); ENDMESSAGE; if (rval) return (TCL_ERROR); Tcl_SetResult(interp, value, TCL_DYNAMIC); return (TCL_OK); } /* * tcl_init -- * Create the TCL commands used by nvi. * * PUBLIC: int tcl_init __P((GS *)); */ int tcl_init(gp) GS *gp; { gp->tcl_interp = Tcl_CreateInterp(); if (Tcl_Init(gp->tcl_interp) == TCL_ERROR) return (1); #define TCC(name, function) { \ Tcl_CreateCommand(gp->tcl_interp, name, function, \ (ClientData)NULL, (Tcl_CmdDeleteProc *)NULL); \ } TCC("viAppendLine", tcl_aline); TCC("viDelLine", tcl_dline); TCC("viEndScreen", tcl_escreen); TCC("viFindScreen", tcl_fscreen); TCC("viGetCursor", tcl_getcursor); TCC("viGetLine", tcl_gline); TCC("viGetMark", tcl_getmark); TCC("viGetOpt", tcl_opts_get); TCC("viInsertLine", tcl_iline); TCC("viLastLine", tcl_lline); TCC("viMapKey", tcl_map); TCC("viMsg", tcl_msg); TCC("viNewScreen", tcl_iscreen); TCC("viSetCursor", tcl_setcursor); TCC("viSetLine", tcl_sline); TCC("viSetMark", tcl_setmark); TCC("viSetOpt", tcl_opts_set); TCC("viSwitchScreen", tcl_swscreen); TCC("viUnmapKey", tcl_unmap); return (0); } /* * getscreenid -- * Get the specified screen pointer. * * XXX * This is fatal. We can't post a message into vi that we're unable to find * the screen without first finding the screen... So, this must be the first * thing a Tcl routine does, and, if it fails, the last as well. */ static int getscreenid(interp, spp, id, name) Tcl_Interp *interp; SCR **spp; char *id, *name; { int scr_no; char buf[64]; if (id != NULL && getint(interp, "screen id", id, &scr_no)) return (1); if ((*spp = api_fscreen(scr_no, name)) == NULL) { (void)snprintf(buf, sizeof(buf), "unknown screen id: %s", name == NULL ? id : name); Tcl_SetResult(interp, buf, TCL_VOLATILE); return (1); } return (0); } /* * getint -- * Get a Tcl integer. * * XXX * This code assumes that both recno_t and size_t are larger than ints. */ static int getint(interp, msg, s, intp) Tcl_Interp *interp; char *msg, *s; int *intp; { char buf[64]; if (Tcl_GetInt(interp, s, intp) == TCL_ERROR) return (1); if (*intp < 0) { (void)snprintf(buf, sizeof(buf), "illegal %s %s: may not be negative", msg, s); Tcl_SetResult(interp, buf, TCL_VOLATILE); return (1); } return (0); } /* * msghandler -- * Tcl message routine so that error messages are processed in * Tcl, not in nvi. */ static void msghandler(sp, mtype, msg, len) SCR *sp; mtype_t mtype; char *msg; size_t len; { /* Replace the trailing with an EOS. */ msg[len - 1] = '\0'; Tcl_SetResult(sp->gp->tcl_interp, msg, TCL_VOLATILE); } vigor-0.016.orig/curses/0040755000076400007640000000000007103707250013576 5ustar cjw44cjw44vigor-0.016.orig/curses/cur_hash.c0100644000076400007640000000450707103707247015547 0ustar cjw44cjw44/* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)cur_hash.c 8.1 (Berkeley) 6/4/93"; #endif /* not lint */ #include /* * __hash() is "hashpjw" from the Dragon Book, Aho, Sethi & Ullman, p.436. */ unsigned int __hash(s, len) char *s; int len; { register unsigned int h, g, i; h = 0; i = 0; while (i < len) { h = (h << 4) + s[i]; if (g = h & 0xf0000000) { h = h ^ (g >> 24); h = h ^ g; } i++; } return h; } vigor-0.016.orig/curses/addbytes.c0100644000076400007640000001060607103707247015547 0ustar cjw44cjw44/* * Copyright (c) 1987, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)addbytes.c 8.4 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" #define SYNCH_IN {y = win->cury; x = win->curx;} #define SYNCH_OUT {win->cury = y; win->curx = x;} /* * waddbytes -- * Add the character to the current position in the given window. */ int __waddbytes(win, bytes, count, so) register WINDOW *win; register const char *bytes; register int count; int so; { static char blanks[] = " "; register int c, newx, x, y; char stand; __LINE *lp; SYNCH_IN; #ifdef CURSES_DEBUG __CTRACE("ADDBYTES('%c') at (%d, %d)\n", c, y, x); #endif while (count--) { c = *bytes++; switch (c) { case '\t': SYNCH_OUT; if (waddbytes(win, blanks, 8 - (x % 8)) == ERR) return (ERR); SYNCH_IN; break; default: #ifdef CURSES_DEBUG __CTRACE("ADDBYTES(%0.2o, %d, %d)\n", win, y, x); #endif lp = win->lines[y]; if (lp->flags & __ISPASTEOL) { lp->flags &= ~__ISPASTEOL; newline: if (y == win->maxy - 1) { if (win->flags & __SCROLLOK) { SYNCH_OUT; scroll(win); SYNCH_IN; lp = win->lines[y]; x = 0; } else return (ERR); } else { y++; lp = win->lines[y]; x = 0; } if (c == '\n') break; } stand = '\0'; if (win->flags & __WSTANDOUT || so) stand |= __STANDOUT; #ifdef CURSES_DEBUG __CTRACE("ADDBYTES: 1: y = %d, x = %d, firstch = %d, lastch = %d\n", y, x, *win->lines[y]->firstchp, *win->lines[y]->lastchp); #endif if (lp->line[x].ch != c || !(lp->line[x].attr & stand)) { newx = x + win->ch_off; if (!(lp->flags & __ISDIRTY)) { lp->flags |= __ISDIRTY; *lp->firstchp = *lp->lastchp = newx; } else if (newx < *lp->firstchp) *lp->firstchp = newx; else if (newx > *lp->lastchp) *lp->lastchp = newx; #ifdef CURSES_DEBUG __CTRACE("ADDBYTES: change gives f/l: %d/%d [%d/%d]\n", *lp->firstchp, *lp->lastchp, *lp->firstchp - win->ch_off, *lp->lastchp - win->ch_off); #endif } lp->line[x].ch = c; if (stand) lp->line[x].attr |= __STANDOUT; else lp->line[x].attr &= ~__STANDOUT; if (x == win->maxx - 1) lp->flags |= __ISPASTEOL; else x++; #ifdef CURSES_DEBUG __CTRACE("ADDBYTES: 2: y = %d, x = %d, firstch = %d, lastch = %d\n", y, x, *win->lines[y]->firstchp, *win->lines[y]->lastchp); #endif break; case '\n': SYNCH_OUT; wclrtoeol(win); SYNCH_IN; if (!NONL) x = 0; goto newline; case '\r': x = 0; break; case '\b': if (--x < 0) x = 0; break; } } SYNCH_OUT; return (OK); } vigor-0.016.orig/curses/curses.h0100644000076400007640000002542407103707247015265 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)curses.h 8.5 (Berkeley) 4/29/95 */ #ifndef _CURSES_H_ #define _CURSES_H_ #ifdef _CURSES_PRIVATE #include "config.h" #endif #include #include #ifdef _CURSES_PRIVATE #include "port.h" #endif /* * The following #defines and #includes are present for backward * compatibility only. They should not be used in future code. * * START BACKWARD COMPATIBILITY ONLY. */ #ifndef _CURSES_PRIVATE #ifndef __cplusplus #define bool char #endif #define reg register #ifndef TRUE #define TRUE (1) #endif #ifndef FALSE #define FALSE (0) #endif #define _puts(s) tputs(s, 0, __cputchar) #define _putchar(c) __cputchar(c) /* Old-style terminal modes access. */ #define baudrate() (cfgetospeed(&__baset)) #define crmode() cbreak() #define erasechar() (__baset.c_cc[VERASE]) #define killchar() (__baset.c_cc[VKILL]) #define nocrmode() nocbreak() #define ospeed (cfgetospeed(&__baset)) #endif /* _CURSES_PRIVATE */ extern char GT; /* Gtty indicates tabs. */ extern char NONL; /* Term can't hack LF doing a CR. */ extern char UPPERCASE; /* Terminal is uppercase only. */ extern int My_term; /* Use Def_term regardless. */ extern char *__Def_term; /* Default terminal type. */ /* Termcap capabilities. */ extern char AM, BS, CA, DA, EO, HC, IN, MI, MS, NC, NS, OS, PC, UL, XB, XN, XT, XS, XX; extern char *AL, *BC, *BT, *CD, *CE, *CL, *CM, *CR, *CS, *DC, *DL, *DM, *DO, *ED, *EI, *K0, *K1, *K2, *K3, *K4, *K5, *K6, *K7, *K8, *K9, *HO, *IC, *IM, *IP, *KD, *KE, *KH, *KL, *KR, *KS, *KU, *LL, *MA, *ND, *NL, *RC, *SC, *SE, *SF, *SO, *SR, *TA, *TE, *TI, *UC, *UE, *UP, *US, *VB, *VS, *VE, *al, *dl, *sf, *sr, *AL_PARM, *DL_PARM, *UP_PARM, *DOWN_PARM, *LEFT_PARM, *RIGHT_PARM; /* END BACKWARD COMPATIBILITY ONLY. */ /* 8-bit ASCII characters. */ #define unctrl(c) __unctrl[(c) & 0xff] #define unctrllen(ch) __unctrllen[(ch) & 0xff] extern char *__unctrl[256]; /* Control strings. */ extern char __unctrllen[256]; /* Control strings length. */ /* * A window an array of __LINE structures pointed to by the 'lines' pointer. * A line is an array of __LDATA structures pointed to by the 'line' pointer. * * IMPORTANT: the __LDATA structure must NOT induce any padding, so if new * fields are added -- padding fields with *constant values* should ensure * that the compiler will not generate any padding when storing an array of * __LDATA structures. This is to enable consistent use of memcmp, and memcpy * for comparing and copying arrays. */ typedef struct { char ch; /* the actual character */ #define __STANDOUT 0x01 /* Added characters are standout. */ char attr; /* attributes of character */ } __LDATA; #define __LDATASIZE (sizeof(__LDATA)) typedef struct { #define __ISDIRTY 0x01 /* Line is dirty. */ #define __ISPASTEOL 0x02 /* Cursor is past end of line */ #define __FORCEPAINT 0x04 /* Force a repaint of the line */ unsigned int flags; unsigned int hash; /* Hash value for the line. */ size_t *firstchp, *lastchp; /* First and last chngd columns ptrs */ size_t firstch, lastch; /* First and last changed columns. */ __LDATA *line; /* Pointer to the line text. */ } __LINE; typedef struct __window { /* Window structure. */ struct __window *nextp, *orig; /* Subwindows list and parent. */ size_t begy, begx; /* Window home. */ size_t cury, curx; /* Current x, y coordinates. */ size_t maxy, maxx; /* Maximum values for curx, cury. */ short ch_off; /* x offset for firstch/lastch. */ __LINE **lines; /* Array of pointers to the lines */ __LINE *lspace; /* line space (for cleanup) */ __LDATA *wspace; /* window space (for cleanup) */ #define __ENDLINE 0x001 /* End of screen. */ #define __FLUSH 0x002 /* Fflush(stdout) after refresh. */ #define __FULLWIN 0x004 /* Window is a screen. */ #define __IDLINE 0x008 /* Insert/delete sequences. */ #define __SCROLLWIN 0x010 /* Last char will scroll window. */ #define __SCROLLOK 0x020 /* Scrolling ok. */ #define __CLEAROK 0x040 /* Clear on next refresh. */ #define __WSTANDOUT 0x080 /* Standout window */ #define __LEAVEOK 0x100 /* If curser left */ unsigned int flags; } WINDOW; /* Curses external declarations. */ extern WINDOW *curscr; /* Current screen. */ extern WINDOW *stdscr; /* Standard screen. */ extern struct termios __orig_termios; /* Terminal state before curses */ extern struct termios __baset; /* Our base terminal state */ extern int __tcaction; /* If terminal hardware set. */ extern int COLS; /* Columns on the screen. */ extern int LINES; /* Lines on the screen. */ #define ERR (0) /* Error return. */ #define OK (1) /* Success return. */ /* Standard screen pseudo functions. */ #define addbytes(s, n) __waddbytes(stdscr, s, n, 0) #define addch(ch) waddch(stdscr, ch) #define addnstr(s, n) waddnstr(stdscr, s, n) #define addstr(s) __waddbytes(stdscr, s, strlen(s), 0) #define clear() wclear(stdscr) #define clrtobot() wclrtobot(stdscr) #define clrtoeol() wclrtoeol(stdscr) #define delch() wdelch(stdscr) #define deleteln() wdeleteln(stdscr) #define erase() werase(stdscr) #define getch() wgetch(stdscr) #define getstr(s) wgetstr(stdscr, s) #define inch() winch(stdscr) #define insch(ch) winsch(stdscr, ch) #define insertln() winsertln(stdscr) #define move(y, x) wmove(stdscr, y, x) #define refresh() wrefresh(stdscr) #define standend() wstandend(stdscr) #define standout() wstandout(stdscr) #define waddbytes(w, s, n) __waddbytes(w, s, n, 0) #define waddstr(w, s) __waddbytes(w, s, strlen(s), 0) /* Standard screen plus movement pseudo functions. */ #define mvaddbytes(y, x, s, n) mvwaddbytes(stdscr, y, x, s, n) #define mvaddch(y, x, ch) mvwaddch(stdscr, y, x, ch) #define mvaddnstr(y, x, s, n) mvwaddnstr(stdscr, y, x, s, n) #define mvaddstr(y, x, s) mvwaddstr(stdscr, y, x, s) #define mvdelch(y, x) mvwdelch(stdscr, y, x) #define mvgetch(y, x) mvwgetch(stdscr, y, x) #define mvgetstr(y, x, s) mvwgetstr(stdscr, y, x, s) #define mvinch(y, x) mvwinch(stdscr, y, x) #define mvinsch(y, x, c) mvwinsch(stdscr, y, x, c) #define mvwaddbytes(w, y, x, s, n) \ (wmove(w, y, x) == ERR ? ERR : __waddbytes(w, s, n, 0)) #define mvwaddch(w, y, x, ch) \ (wmove(w, y, x) == ERR ? ERR : waddch(w, ch)) #define mvwaddnstr(w, y, x, s, n) \ (wmove(w, y, x) == ERR ? ERR : waddnstr(w, s, n)) #define mvwaddstr(w, y, x, s) \ (wmove(w, y, x) == ERR ? ERR : __waddbytes(w, s, strlen(s), 0)) #define mvwdelch(w, y, x) \ (wmove(w, y, x) == ERR ? ERR : wdelch(w)) #define mvwgetch(w, y, x) \ (wmove(w, y, x) == ERR ? ERR : wgetch(w)) #define mvwgetstr(w, y, x, s) \ (wmove(w, y, x) == ERR ? ERR : wgetstr(w, s)) #define mvwinch(w, y, x) \ (wmove(w, y, x) == ERR ? ERR : winch(w)) #define mvwinsch(w, y, x, c) \ (wmove(w, y, x) == ERR ? ERR : winsch(w, c)) /* Psuedo functions. */ #define clearok(w, bf) \ ((bf) ? ((w)->flags |= __CLEAROK) : ((w)->flags &= ~__CLEAROK)) #define flushok(w, bf) \ ((bf) ? ((w)->flags |= __FLUSH) : ((w)->flags &= ~__FLUSH)) #define getyx(w, y, x) \ (y) = (w)->cury, (x) = (w)->curx #define leaveok(w, bf) \ ((bf) ? ((w)->flags |= __LEAVEOK) : ((w)->flags &= ~__LEAVEOK)) #define scrollok(w, bf) \ ((bf) ? ((w)->flags |= __SCROLLOK) : ((w)->flags &= ~__SCROLLOK)) #define winch(w) \ ((w)->lines[(w)->cury]->line[(w)->curx].ch & 0177) /* Public function prototypes. */ int box(); int cbreak(); int delwin(); int echo(); int endwin(); char *fullname(); char *getcap(); int gettmode(); void idlok(); WINDOW *initscr(); char *longname(); int mvcur(); int mvprintw(); int mvscanw(); int mvwin(); int mvwprintw(); int mvwscanw(); WINDOW *newwin(); int nl(); int nocbreak(); int noecho(); int nonl(); int noraw(); int overlay(); int overwrite(); int printw(); int raw(); int resetty(); int savetty(); int scanw(); int scroll(); int setterm(); int sscans(); WINDOW *subwin(); int suspendwin(); int touchline(); int touchoverlap(); int touchwin(); int vwprintw(); int vwscanw(); int waddch(); int waddnstr(); int wclear(); int wclrtobot(); int wclrtoeol(); int wdelch(); int wdeleteln(); int werase(); int wgetch(); int wgetstr(); int winsch(); int winsertln(); int wmove(); int wprintw(); int wrefresh(); int wscanw(); int wstandend(); int wstandout(); int vwprintw(); /* Private functions that are needed for user programs prototypes. */ void __cputchar(); int __waddbytes(); /* Private functions. */ #ifdef _CURSES_PRIVATE void __CTRACE(); unsigned int __hash(); void __id_subwins(); int __mvcur(); void __restore_stophandler(); void __set_stophandler(); void __set_subwin(); void __startwin(); void __stop_signal_handler(); void __swflags(); int __touchline(); int __touchwin(); char *__tscroll(); int __waddch(); /* Private #defines. */ #ifndef min #define min(a,b) (a < b ? a : b) #endif #ifndef max #define max(a,b) (a > b ? a : b) #endif /* Private externs. */ extern int __echoit; extern int __endwin; extern int __pfast; extern int __rawmode; extern int __noqch; #endif /* Termcap functions. */ int tgetent(); int tgetnum(); int tgetflag(); char *tgetstr(); char *tgoto(); int tputs(); #endif /* !_CURSES_H_ */ vigor-0.016.orig/curses/box.c0100644000076400007640000000556507103707247014550 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)box.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * box -- * Draw a box around the given window with "vert" as the vertical * delimiting char, and "hor", as the horizontal one. */ int box(win, vert, hor) register WINDOW *win; int vert, hor; { register int endy, endx, i; register __LDATA *fp, *lp; endx = win->maxx; endy = win->maxy - 1; fp = win->lines[0]->line; lp = win->lines[endy]->line; for (i = 0; i < endx; i++) { fp[i].ch = lp[i].ch = hor; fp[i].attr &= ~__STANDOUT; lp[i].attr &= ~__STANDOUT; } endx--; for (i = 0; i <= endy; i++) { win->lines[i]->line[0].ch = vert; win->lines[i]->line[endx].ch = vert; win->lines[i]->line[0].attr &= ~__STANDOUT; win->lines[i]->line[endx].attr &= ~__STANDOUT; } if (!(win->flags & __SCROLLOK) && (win->flags & __SCROLLWIN)) { fp[0].ch = fp[endx].ch = lp[0].ch = lp[endx].ch = ' '; fp[0].attr &= ~__STANDOUT; fp[endx].attr &= ~__STANDOUT; lp[0].attr &= ~__STANDOUT; lp[endx].attr &= ~__STANDOUT; } __touchwin(win); return (OK); } vigor-0.016.orig/curses/clear.c0100644000076400007640000000411507103707247015034 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)clear.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * wclear -- * Clear the window. */ int wclear(win) register WINDOW *win; { if (werase(win) == OK) { win->flags |= __CLEAROK; return (OK); } return (ERR); } vigor-0.016.orig/curses/clrtobot.c0100644000076400007640000000523507103707247015602 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)clrtobot.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * wclrtobot -- * Erase everything on the window. */ int wclrtobot(win) register WINDOW *win; { register int minx, startx, starty, y; register __LDATA *sp, *end, *maxx; if (win->lines[win->cury]->flags & __ISPASTEOL) { starty = win->cury + 1; startx = 0; } else { starty = win->cury; startx = win->curx; } for (y = starty; y < win->maxy; y++) { minx = -1; end = &win->lines[y]->line[win->maxx]; for (sp = &win->lines[y]->line[startx]; sp < end; sp++) if (sp->ch != ' ' || sp->attr != 0) { maxx = sp; if (minx == -1) minx = sp - win->lines[y]->line; sp->ch = ' '; sp->attr = 0; } if (minx != -1) __touchline(win, y, minx, maxx - win->lines[y]->line, 0); startx = 0; } return (OK); } vigor-0.016.orig/curses/delch.c0100644000076400007640000000464607103707247015036 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)delch.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" /* * wdelch -- * Do an insert-char on the line, leaving (cury, curx) unchanged. */ int wdelch(win) register WINDOW *win; { register __LDATA *end, *temp1, *temp2; end = &win->lines[win->cury]->line[win->maxx - 1]; temp1 = &win->lines[win->cury]->line[win->curx]; temp2 = temp1 + 1; while (temp1 < end) { (void)memcpy(temp1, temp2, sizeof(__LDATA)); temp1++, temp2++; } temp1->ch = ' '; temp1->attr = 0; __touchline(win, win->cury, win->curx, win->maxx - 1, 0); return (OK); } vigor-0.016.orig/curses/waddnstr.c0100644000076400007640000000444407103707247015601 0ustar cjw44cjw44/* * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)addnstr.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" /* * waddnstr -- * Add a string (at most n characters) to the given window * starting at (_cury, _curx). If n is negative, add the * entire string. */ int waddnstr(win, s, n) WINDOW *win; const char *s; int n; { size_t len; const char *p; if (n > 0) for (p = s, len = 0; n-- && *p++; ++len); else len = strlen(s); return (waddbytes(win, s, len)); } vigor-0.016.orig/curses/clrtoeol.c0100644000076400007640000000542507103707247015576 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)clrtoeol.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * wclrtoeol -- * Clear up to the end of line. */ int wclrtoeol(win) register WINDOW *win; { register int minx, x, y; register __LDATA *end, *maxx, *sp; y = win->cury; x = win->curx; if (win->lines[y]->flags & __ISPASTEOL) { if (y < win->maxy - 1) { y++; x = 0; } else return (OK); } end = &win->lines[y]->line[win->maxx]; minx = -1; maxx = &win->lines[y]->line[x]; for (sp = maxx; sp < end; sp++) if (sp->ch != ' ' || sp->attr != 0) { maxx = sp; if (minx == -1) minx = sp - win->lines[y]->line; sp->ch = ' '; sp->attr = 0; } #ifdef CURSES_DEBUG __CTRACE("CLRTOEOL: minx = %d, maxx = %d, firstch = %d, lastch = %d\n", minx, maxx - win->lines[y]->line, *win->lines[y]->firstchp, *win->lines[y]->lastchp); #endif /* Update firstch and lastch for the line. */ return (__touchline(win, y, x, win->maxx - 1, 0)); } vigor-0.016.orig/curses/cr_put.c0100644000076400007640000002431407103707247015245 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)cr_put.c 8.3 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" #define HARDTABS 8 /* * Terminal driving and line formatting routines. Basic motion optimizations * are done here as well as formatting lines (printing of control characters, * line numbering and the like). */ /* Stub function for the users. */ int mvcur(ly, lx, y, x) int ly, lx, y, x; { return (__mvcur(ly, lx, y, x, 0)); } static void fgoto(); static int plod(); static void plodput(); static int tabcol(); static int outcol, outline, destcol, destline; /* * Sync the position of the output cursor. Most work here is rounding for * terminal boundaries getting the column position implied by wraparound or * the lack thereof and rolling up the screen to get destline on the screen. */ int __mvcur(ly, lx, y, x, in_refresh) int ly, lx, y, x, in_refresh; { #ifdef CURSES_DEBUG __CTRACE("mvcur: moving cursor from (%d, %d) to (%d, %d)\n", ly, lx, y, x); #endif destcol = x; destline = y; outcol = lx; outline = ly; fgoto(in_refresh); return (OK); } static void fgoto(in_refresh) int in_refresh; { register int c, l; register char *cgp; if (destcol >= COLS) { destline += destcol / COLS; destcol %= COLS; } if (outcol >= COLS) { l = (outcol + 1) / COLS; outline += l; outcol %= COLS; if (AM == 0) { while (l > 0) { if (__pfast) if (CR) tputs(CR, 0, __cputchar); else putchar('\r'); if (NL) tputs(NL, 0, __cputchar); else putchar('\n'); l--; } outcol = 0; } if (outline > LINES - 1) { destline -= outline - (LINES - 1); outline = LINES - 1; } } if (destline >= LINES) { l = destline; destline = LINES - 1; if (outline < LINES - 1) { c = destcol; if (__pfast == 0 && !CA) destcol = 0; fgoto(in_refresh); destcol = c; } while (l >= LINES) { /* The following linefeed (or simulation thereof) is * supposed to scroll up the screen, since we are on * the bottom line. We make the assumption that * linefeed will scroll. If ns is in the capability * list this won't work. We should probably have an * sc capability but sf will generally take the place * if it works. * * Superbee glitch: in the middle of the screen have * to use esc B (down) because linefeed screws up in * "Efficient Paging" (what a joke) mode (which is * essential in some SB's because CRLF mode puts * garbage in at end of memory), but you must use * linefeed to scroll since down arrow won't go past * memory end. I turned this off after recieving Paul * Eggert's Superbee description which wins better. */ if (NL /* && !XB */ && __pfast) tputs(NL, 0, __cputchar); else putchar('\n'); l--; if (__pfast == 0) outcol = 0; } } if (destline < outline && !(CA || UP)) destline = outline; if (CA) { cgp = tgoto(CM, destcol, destline); /* * Need this condition due to inconsistent behavior * of backspace on the last column. */ if (outcol != COLS - 1 && plod(strlen(cgp), in_refresh) > 0) plod(0, in_refresh); else tputs(cgp, 0, __cputchar); } else plod(0, in_refresh); outline = destline; outcol = destcol; } /* * Move (slowly) to destination. * Hard thing here is using home cursor on really deficient terminals. * Otherwise just use cursor motions, hacking use of tabs and overtabbing * and backspace. */ static int plodcnt, plodflg; static void plodput(c) int c; { if (plodflg) --plodcnt; else putchar(c); } static int plod(cnt, in_refresh) int cnt, in_refresh; { register int i, j, k, soutcol, soutline; plodcnt = plodflg = cnt; soutcol = outcol; soutline = outline; /* * Consider homing and moving down/right from there, vs. moving * directly with local motions to the right spot. */ if (HO) { /* * i is the cost to home and tab/space to the right to get to * the proper column. This assumes ND space costs 1 char. So * i + destcol is cost of motion with home. */ if (GT) i = (destcol / HARDTABS) + (destcol % HARDTABS); else i = destcol; /* j is cost to move locally without homing. */ if (destcol >= outcol) { /* if motion is to the right */ j = destcol / HARDTABS - outcol / HARDTABS; if (GT && j) j += destcol % HARDTABS; else j = destcol - outcol; } else /* leftward motion only works if we can backspace. */ if (outcol - destcol <= i && (BS || BC)) /* Cheaper to backspace. */ i = j = outcol - destcol; else /* Impossibly expensive. */ j = i + 1; /* k is the absolute value of vertical distance. */ k = outline - destline; if (k < 0) k = -k; j += k; /* Decision. We may not have a choice if no UP. */ if (i + destline < j || (!UP && destline < outline)) { /* * Cheaper to home. Do it now and pretend it's a * regular local motion. */ tputs(HO, 0, plodput); outcol = outline = 0; } else if (LL) { /* * Quickly consider homing down and moving from there. * Assume cost of LL is 2. */ k = (LINES - 1) - destline; if (i + k + 2 < j && (k <= 0 || UP)) { tputs(LL, 0, plodput); outcol = 0; outline = LINES - 1; } } } else /* No home and no up means it's impossible. */ if (!UP && destline < outline) return (-1); if (GT) i = destcol % HARDTABS + destcol / HARDTABS; else i = destcol; #ifdef notdef if (BT && outcol > destcol && (j = (((outcol+7) & ~7) - destcol - 1) >> 3)) { j *= (k = strlen(BT)); if ((k += (destcol&7)) > 4) j += 8 - (destcol&7); else j += k; } else #endif j = outcol - destcol; /* * If we will later need a \n which will turn into a \r\n by the * system or the terminal, then don't bother to try to \r. */ if ((NONL || !__pfast) && outline < destline) goto dontcr; /* * If the terminal will do a \r\n and there isn't room for it, then * we can't afford a \r. */ if (NC && outline >= destline) goto dontcr; /* * If it will be cheaper, or if we can't back up, then send a return * preliminarily. */ if (j > i + 1 || outcol > destcol && !BS && !BC) { /* * BUG: this doesn't take the (possibly long) length of CR * into account. */ if (CR) tputs(CR, 0, plodput); else plodput('\r'); if (NC) { if (NL) tputs(NL, 0, plodput); else plodput('\n'); outline++; } outcol = 0; } dontcr: while (outline < destline) { outline++; if (NL) tputs(NL, 0, plodput); else plodput('\n'); if (plodcnt < 0) goto out; if (NONL || __pfast == 0) outcol = 0; } if (BT) k = strlen(BT); while (outcol > destcol) { if (plodcnt < 0) goto out; #ifdef notdef if (BT && outcol - destcol > k + 4) { tputs(BT, 0, plodput); outcol--; outcol &= ~7; continue; } #endif outcol--; if (BC) tputs(BC, 0, plodput); else plodput('\b'); } while (outline > destline) { outline--; tputs(UP, 0, plodput); if (plodcnt < 0) goto out; } if (GT && destcol - outcol > 1) { for (;;) { i = tabcol(outcol, HARDTABS); if (i > destcol) break; if (TA) tputs(TA, 0, plodput); else plodput('\t'); outcol = i; } if (destcol - outcol > 4 && i < COLS && (BC || BS)) { if (TA) tputs(TA, 0, plodput); else plodput('\t'); outcol = i; while (outcol > destcol) { outcol--; if (BC) tputs(BC, 0, plodput); else plodput('\b'); } } } while (outcol < destcol) { /* * Move one char to the right. We don't use ND space because * it's better to just print the char we are moving over. */ if (in_refresh) if (plodflg) /* Avoid a complex calculation. */ plodcnt--; else { i = curscr->lines[outline]->line[outcol].ch; if ((curscr->lines[outline]->line[outcol].attr & __STANDOUT) == (curscr->flags & __WSTANDOUT)) putchar(i); else goto nondes; } else nondes: if (ND) tputs(ND, 0, plodput); else plodput(' '); outcol++; if (plodcnt < 0) goto out; } out: if (plodflg) { outcol = soutcol; outline = soutline; } return (plodcnt); } /* * Return the column number that results from being in column col and * hitting a tab, where tabs are set every ts columns. Work right for * the case where col > COLS, even if ts does not divide COLS. */ static int tabcol(col, ts) int col, ts; { int offset; if (col >= COLS) { offset = COLS * (col / COLS); col -= offset; } else offset = 0; return (col + ts - (col % ts) + offset); } vigor-0.016.orig/curses/curses.c0100644000076400007640000000623507103707247015257 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)curses.c 8.3 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* Private. */ int __echoit = 1; /* If stty indicates ECHO. */ int __pfast; int __rawmode = 0; /* If stty indicates RAW mode. */ int __noqch = 0; /* * If terminal doesn't have * insert/delete line capabilities * for quick change on refresh. */ char AM, BS, CA, DA, EO, HC, IN, MI, MS, NC, NS, OS, PC, UL, XB, XN, XT, XS, XX; char *AL, *BC, *BT, *CD, *CE, *CL, *CM, *CR, *CS, *DC, *DL, *DM, *DO, *ED, *EI, *K0, *K1, *K2, *K3, *K4, *K5, *K6, *K7, *K8, *K9, *HO, *IC, *IM, *IP, *KD, *KE, *KH, *KL, *KR, *KS, *KU, *LL, *MA, *ND, *NL, *RC, *SC, *SE, *SF, *SO, *SR, *TA, *TE, *TI, *UC, *UE, *UP, *US, *VB, *VS, *VE, *al, *dl, *sf, *sr, *AL_PARM, *DL_PARM, *UP_PARM, *DOWN_PARM, *LEFT_PARM, *RIGHT_PARM; /* * Public. * * XXX * UPPERCASE isn't used by libcurses, and is left for backward * compatibility only. */ WINDOW *curscr; /* Current screen. */ WINDOW *stdscr; /* Standard screen. */ int COLS; /* Columns on the screen. */ int LINES; /* Lines on the screen. */ int My_term = 0; /* Use Def_term regardless. */ char *__Def_term = "unknown"; /* Default terminal type. */ char GT; /* Gtty indicates tabs. */ char NONL; /* Term can't hack LF doing a CR. */ char UPPERCASE; /* Terminal is uppercase only. */ vigor-0.016.orig/curses/deleteln.c0100644000076400007640000000550307103707247015544 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)deleteln.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" /* * wdeleteln -- * Delete a line from the screen. It leaves (cury, curx) unchanged. */ int wdeleteln(win) register WINDOW *win; { register int y, i; register __LINE *temp; #ifdef CURSES_DEBUG __CTRACE("deleteln: (%0.2o)\n", win); #endif temp = win->lines[win->cury]; for (y = win->cury; y < win->maxy - 1; y++) { win->lines[y]->flags &= ~__ISPASTEOL; win->lines[y + 1]->flags &= ~__ISPASTEOL; if (win->orig == NULL) win->lines[y] = win->lines[y + 1]; else (void) memcpy(win->lines[y]->line, win->lines[y + 1]->line, win->maxx * __LDATASIZE); __touchline(win, y, 0, win->maxx - 1, 0); } if (win->orig == NULL) win->lines[y] = temp; else temp = win->lines[y]; for(i = 0; i < win->maxx; i++) { temp->line[i].ch = ' '; temp->line[i].attr = 0; } __touchline(win, y, 0, win->maxx - 1, 0); if (win->orig == NULL) __id_subwins(win); return (OK); } vigor-0.016.orig/curses/erase.c0100644000076400007640000000501407103707247015044 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)erase.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * werase -- * Erases everything on the window. */ int werase(win) register WINDOW *win; { register int minx, y; register __LDATA *sp, *end, *start, *maxx; #ifdef CURSES_DEBUG __CTRACE("werase: (%0.2o)\n", win); #endif for (y = 0; y < win->maxy; y++) { minx = -1; start = win->lines[y]->line; end = &start[win->maxx]; for (sp = start; sp < end; sp++) if (sp->ch != ' ' || sp->attr != 0) { maxx = sp; if (minx == -1) minx = sp - start; sp->ch = ' '; sp->attr = 0; } if (minx != -1) __touchline(win, y, minx, maxx - win->lines[y]->line, 0); } return (OK); } vigor-0.016.orig/curses/delwin.c0100644000076400007640000000534607103707247015237 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)delwin.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" /* * delwin -- * Delete a window and release it back to the system. */ int delwin(win) register WINDOW *win; { register WINDOW *wp, *np; if (win->orig == NULL) { /* * If we are the original window, delete the space for all * the subwindows, the line space and the window space. */ free(win->lspace); free(win->wspace); free(win->lines); wp = win->nextp; while (wp != win) { np = wp->nextp; delwin(wp); wp = np; } } else { /* * If we are a subwindow, take ourselves out of the list. * NOTE: if we are a subwindow, the minimum list is orig * followed by this subwindow, so there are always at least * two windows in the list. */ for (wp = win->nextp; wp->nextp != win; wp = wp->nextp) continue; wp->nextp = win->nextp; } free(win); return (OK); } vigor-0.016.orig/curses/fullname.c0100644000076400007640000000464207103707247015556 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)fullname.c 8.1 (Berkeley) 6/4/93"; #endif /* not lint */ /* * fullname -- * This routine fills in "def" with the full name of the terminal. * This is assumed to be the last name in the list of aliases. */ char * fullname(bp, def) register char *bp, *def; { register char *cp; *def = '\0'; /* In case no name. */ while (*bp && *bp != ':') { cp = def; /* Start of answer. */ while (*bp && *bp != ':' && *bp != '|') *cp++ = *bp++; /* Copy name over. */ *cp = '\0'; /* Zero end of name. */ if (*bp == '|') bp++; /* Skip over '|' if that is case. */ } return (def); } vigor-0.016.orig/curses/getch.c0100644000076400007640000000514407103707247015043 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)getch.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * wgetch -- * Read in a character from the window. */ int wgetch(win) register WINDOW *win; { register int inp, weset; if (!(win->flags & __SCROLLOK) && (win->flags & __FULLWIN) && win->curx == win->maxx - 1 && win->cury == win->maxy - 1) return (ERR); #ifdef CURSES_DEBUG __CTRACE("wgetch: __echoit = %d, __rawmode = %d\n", __echoit, __rawmode); #endif if (__echoit && !__rawmode) { cbreak(); weset = 1; } else weset = 0; inp = getchar(); #ifdef CURSES_DEBUG __CTRACE("wgetch got '%s'\n", unctrl(inp)); #endif if (__echoit) { mvwaddch(curscr, win->cury + win->begy, win->curx + win->begx, inp); waddch(win, inp); } if (weset) nocbreak(); return (inp); } vigor-0.016.orig/curses/getstr.c0100644000076400007640000000427107103707247015261 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)getstr.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * wgetstr -- * Get a string starting at (cury, curx). */ int wgetstr(win, str) register WINDOW *win; register char *str; { while ((*str = wgetch(win)) != ERR && *str != '\n') str++; if (*str == ERR) { *str = '\0'; return (ERR); } *str = '\0'; return (OK); } vigor-0.016.orig/curses/id_subwins.c0100644000076400007640000000474407103707247016124 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)id_subwins.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * __id_subwins -- * Re-sync the pointers to lines for all the subwindows. */ void __id_subwins(orig) register WINDOW *orig; { register WINDOW *win; register int oy, realy, y; realy = orig->begy + orig->cury; for (win = orig->nextp; win != orig; win = win->nextp) { /* * If the window ends before our current position, don't need * to do anything. */ if (win->begy + win->maxy <= realy) continue; oy = orig->cury; for (y = realy - win->begy; y < win->maxy; y++, oy++) win->lines[y]->line = &orig->lines[oy]->line[win->ch_off]; } } vigor-0.016.orig/curses/idlok.c0100644000076400007640000000416507103707250015047 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)idlok.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * idlok -- * Turn on and off using insert/deleteln sequences for the * given window. */ void idlok(win, bf) WINDOW *win; int bf; { if (bf) win->flags |= __IDLINE; else win->flags &= ~__IDLINE; } vigor-0.016.orig/curses/initscr.c0100644000076400007640000000562107103707250015416 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)initscr.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include #include "curses.h" /* * initscr -- * Initialize the current and standard screen. */ WINDOW * initscr() { register char *sp; #ifdef CURSES_DEBUG __CTRACE("initscr\n"); #endif __echoit = 1; __pfast = __rawmode = __noqch = 0; if (gettmode() == ERR) return (NULL); /* * If My_term is set, or can't find a terminal in the environment, * use Def_term. */ if (My_term || (sp = getenv("TERM")) == NULL) sp = __Def_term; if (setterm(sp) == ERR) return (NULL); /* Need either homing or cursor motion for refreshes */ if (!HO && !CM) return (NULL); if (curscr != NULL) delwin(curscr); if ((curscr = newwin(LINES, COLS, 0, 0)) == ERR) return (NULL); clearok(curscr, 1); if (stdscr != NULL) delwin(stdscr); if ((stdscr = newwin(LINES, COLS, 0, 0)) == ERR) { delwin(curscr); return (NULL); } __set_stophandler(); #ifdef CURSES_DEBUG __CTRACE("initscr: LINES = %d, COLS = %d\n", LINES, COLS); #endif __startwin(); return (stdscr); } vigor-0.016.orig/curses/insch.c0100644000076400007640000000527207103707250015051 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)insch.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" /* * winsch -- * Do an insert-char on the line, leaving (cury, curx) unchanged. */ int winsch(win, ch) register WINDOW *win; int ch; { register __LDATA *end, *temp1, *temp2; end = &win->lines[win->cury]->line[win->curx]; temp1 = &win->lines[win->cury]->line[win->maxx - 1]; temp2 = temp1 - 1; while (temp1 > end) { (void)memcpy(temp1, temp2, sizeof(__LDATA)); temp1--, temp2--; } temp1->ch = ch; temp1->attr &= ~__STANDOUT; __touchline(win, win->cury, win->curx, win->maxx - 1, 0); if (win->cury == LINES - 1 && (win->lines[LINES - 1]->line[COLS - 1].ch != ' ' || win->lines[LINES -1]->line[COLS - 1].attr != 0)) if (win->flags & __SCROLLOK) { wrefresh(win); scroll(win); win->cury--; } else return (ERR); return (OK); } vigor-0.016.orig/curses/insertln.c0100644000076400007640000000553507103707250015605 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)insertln.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" /* * winsertln -- * Do an insert-line on the window, leaving (cury, curx) unchanged. */ int winsertln(win) register WINDOW *win; { register int y, i; register __LINE *temp; #ifdef CURSES_DEBUG __CTRACE("insertln: (%0.2o)\n", win); #endif if (win->orig == NULL) temp = win->lines[win->maxy - 1]; for (y = win->maxy - 1; y > win->cury; --y) { win->lines[y]->flags &= ~__ISPASTEOL; win->lines[y - 1]->flags &= ~__ISPASTEOL; if (win->orig == NULL) win->lines[y] = win->lines[y - 1]; else (void)memcpy(win->lines[y]->line, win->lines[y - 1]->line, win->maxx * __LDATASIZE); __touchline(win, y, 0, win->maxx - 1, 0); } if (win->orig == NULL) win->lines[y] = temp; else temp = win->lines[y]; for(i = 0; i < win->maxx; i++) { temp->line[i].ch = ' '; temp->line[i].attr = 0; } __touchline(win, y, 0, win->maxx - 1, 0); if (win->orig == NULL) __id_subwins(win); return (OK); } vigor-0.016.orig/curses/move.c0100644000076400007640000000450307103707250014707 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)move.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * wmove -- * Moves the cursor to the given point. */ int wmove(win, y, x) register WINDOW *win; register int y, x; { #ifdef CURSES_DEBUG __CTRACE("wmove: (%d, %d)\n", y, x); #endif if (x < 0 || y < 0) return (ERR); if (x >= win->maxx || y >= win->maxy) return (ERR); win->curx = x; win->lines[win->cury]->flags &= ~__ISPASTEOL; win->cury = y; win->lines[y]->flags &= ~__ISPASTEOL; return (OK); } vigor-0.016.orig/curses/longname.c0100644000076400007640000000432107103707250015537 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)longname.c 8.1 (Berkeley) 6/4/93"; #endif /* not lint */ /* * longname -- * Fill in "def" with the long name of the terminal. */ char * longname(bp, def) register char *bp, *def; { register char *cp; while (*bp && *bp != ':' && *bp != '|') bp++; if (*bp == '|') { for (cp = def, ++bp; *bp && *bp != ':' && *bp != '|';) *cp++ = *bp++; *cp = '\0'; } return (def); } vigor-0.016.orig/curses/mvwin.c0100644000076400007640000000520007103707250015074 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)mvwin.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * mvwin -- * Relocate the starting position of a window. */ int mvwin(win, by, bx) register WINDOW *win; register int by, bx; { register WINDOW *orig; register int dy, dx; if (by + win->maxy > LINES || bx + win->maxx > COLS) return (ERR); dy = by - win->begy; dx = bx - win->begx; orig = win->orig; if (orig == NULL) { orig = win; do { win->begy += dy; win->begx += dx; __swflags(win); win = win->nextp; } while (win != orig); } else { if (by < orig->begy || win->maxy + dy > orig->maxy) return (ERR); if (bx < orig->begx || win->maxx + dx > orig->maxx) return (ERR); win->begy = by; win->begx = bx; __swflags(win); __set_subwin(orig, win); } __touchwin(win); return (OK); } vigor-0.016.orig/curses/newwin.c0100644000076400007640000001441607103707250015254 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)newwin.c 8.3 (Berkeley) 7/27/94"; #endif /* not lint */ #include #include "curses.h" #undef nl /* Don't need it here, and it interferes. */ static WINDOW *__makenew(); void __set_subwin(); /* * newwin -- * Allocate space for and set up defaults for a new window. */ WINDOW * newwin(nl, nc, by, bx) register int nl, nc, by, bx; { register WINDOW *win; register __LINE *lp; register int i, j; register __LDATA *sp; if (nl == 0) nl = LINES - by; if (nc == 0) nc = COLS - bx; if ((win = __makenew(nl, nc, by, bx, 0)) == NULL) return (NULL); win->nextp = win; win->ch_off = 0; win->orig = NULL; #ifdef CURSES_DEBUG __CTRACE("newwin: win->ch_off = %d\n", win->ch_off); #endif for (i = 0; i < nl; i++) { lp = win->lines[i]; lp->flags = 0; for (sp = lp->line, j = 0; j < nc; j++, sp++) { sp->ch = ' '; sp->attr = 0; } lp->hash = __hash((char *) lp->line, nc * __LDATASIZE); } return (win); } WINDOW * subwin(orig, nl, nc, by, bx) register WINDOW *orig; register int by, bx, nl, nc; { int i; __LINE *lp; register WINDOW *win; /* Make sure window fits inside the original one. */ #ifdef CURSES_DEBUG __CTRACE("subwin: (%0.2o, %d, %d, %d, %d)\n", orig, nl, nc, by, bx); #endif if (by < orig->begy || bx < orig->begx || by + nl > orig->maxy + orig->begy || bx + nc > orig->maxx + orig->begx) return (NULL); if (nl == 0) nl = orig->maxy + orig->begy - by; if (nc == 0) nc = orig->maxx + orig->begx - bx; if ((win = __makenew(nl, nc, by, bx, 1)) == NULL) return (NULL); win->nextp = orig->nextp; orig->nextp = win; win->orig = orig; /* Initialize flags here so that refresh can also use __set_subwin. */ for (lp = win->lspace, i = 0; i < win->maxy; i++, lp++) lp->flags = 0; __set_subwin(orig, win); return (win); } /* * This code is shared with mvwin(). */ void __set_subwin(orig, win) register WINDOW *orig, *win; { int i; __LINE *lp, *olp; win->ch_off = win->begx - orig->begx; /* Point line pointers to line space. */ for (lp = win->lspace, i = 0; i < win->maxy; i++, lp++) { win->lines[i] = lp; olp = orig->lines[i + win->begy]; lp->line = &olp->line[win->begx]; lp->firstchp = &olp->firstch; lp->lastchp = &olp->lastch; lp->hash = __hash((char *) lp->line, win->maxx * __LDATASIZE); } #ifdef CURSES_DEBUG __CTRACE("__set_subwin: win->ch_off = %d\n", win->ch_off); #endif } /* * __makenew -- * Set up a window buffer and returns a pointer to it. */ static WINDOW * __makenew(nl, nc, by, bx, sub) register int by, bx, nl, nc; int sub; { register WINDOW *win; register __LINE *lp; int i; #ifdef CURSES_DEBUG __CTRACE("makenew: (%d, %d, %d, %d)\n", nl, nc, by, bx); #endif if ((win = malloc(sizeof(*win))) == NULL) return (NULL); #ifdef CURSES_DEBUG __CTRACE("makenew: nl = %d\n", nl); #endif /* * Set up line pointer array and line space. */ if ((win->lines = malloc (nl * sizeof(__LINE *))) == NULL) { free(win); return NULL; } if ((win->lspace = malloc (nl * sizeof(__LINE))) == NULL) { free (win); free (win->lines); return NULL; } /* Don't allocate window and line space if it's a subwindow */ if (!sub) { /* * Allocate window space in one chunk. */ if ((win->wspace = malloc(nc * nl * sizeof(__LDATA))) == NULL) { free(win->lines); free(win->lspace); free(win); return NULL; } /* * Point line pointers to line space, and lines themselves into * window space. */ for (lp = win->lspace, i = 0; i < nl; i++, lp++) { win->lines[i] = lp; lp->line = &win->wspace[i * nc]; lp->firstchp = &lp->firstch; lp->lastchp = &lp->lastch; lp->firstch = 0; lp->lastch = 0; } } #ifdef CURSES_DEBUG __CTRACE("makenew: nc = %d\n", nc); #endif win->cury = win->curx = 0; win->maxy = nl; win->maxx = nc; win->begy = by; win->begx = bx; win->flags = 0; __swflags(win); #ifdef CURSES_DEBUG __CTRACE("makenew: win->flags = %0.2o\n", win->flags); __CTRACE("makenew: win->maxy = %d\n", win->maxy); __CTRACE("makenew: win->maxx = %d\n", win->maxx); __CTRACE("makenew: win->begy = %d\n", win->begy); __CTRACE("makenew: win->begx = %d\n", win->begx); #endif return (win); } void __swflags(win) register WINDOW *win; { win->flags &= ~(__ENDLINE | __FULLWIN | __SCROLLWIN | __LEAVEOK); if (win->begx + win->maxx == COLS) { win->flags |= __ENDLINE; if (win->begx == 0 && win->maxy == LINES && win->begy == 0) win->flags |= __FULLWIN; if (win->begy + win->maxy == LINES) win->flags |= __SCROLLWIN; } } vigor-0.016.orig/curses/overlay.c0100644000076400007640000000567407103707250015434 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)overlay.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include "curses.h" /* * overlay -- * Writes win1 on win2 non-destructively. */ int overlay(win1, win2) register WINDOW *win1, *win2; { register int x, y, y1, y2, endy, endx, starty, startx; register __LDATA *sp, *end; #ifdef CURSES_DEBUG __CTRACE("overlay: (%0.2o, %0.2o);\n", win1, win2); #endif starty = max(win1->begy, win2->begy); startx = max(win1->begx, win2->begx); endy = min(win1->maxy + win1->begy, win2->maxy + win2->begx); endx = min(win1->maxx + win1->begx, win2->maxx + win2->begx); #ifdef CURSES_DEBUG __CTRACE("overlay: from (%d,%d) to (%d,%d)\n", starty, startx, endy, endx); #endif if (starty >= endy || startx >= endx) return (OK); y1 = starty - win1->begy; y2 = starty - win2->begy; for (y = starty; y < endy; y++, y1++, y2++) { end = &win1->lines[y1]->line[endx - win1->begx]; x = startx - win2->begx; for (sp = &win1->lines[y1]->line[startx - win1->begx]; sp < end; sp++) { if (!isspace(sp->ch)) { wmove(win2, y2, x); __waddch(win2, sp); } x++; } } return (OK); } vigor-0.016.orig/curses/overwrite.c0100644000076400007640000000556707103707250016002 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)overwrite.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include #include "curses.h" /* * overwrite -- * Writes win1 on win2 destructively. */ int overwrite(win1, win2) register WINDOW *win1, *win2; { register int x, y, endy, endx, starty, startx; #ifdef CURSES_DEBUG __CTRACE("overwrite: (%0.2o, %0.2o);\n", win1, win2); #endif starty = max(win1->begy, win2->begy); startx = max(win1->begx, win2->begx); endy = min(win1->maxy + win1->begy, win2->maxy + win2->begx); endx = min(win1->maxx + win1->begx, win2->maxx + win2->begx); if (starty >= endy || startx >= endx) return (OK); #ifdef CURSES_DEBUG __CTRACE("overwrite: from (%d, %d) to (%d, %d)\n", starty, startx, endy, endx); #endif x = endx - startx; for (y = starty; y < endy; y++) { (void)memcpy( &win2->lines[y - win2->begy]->line[startx - win2->begx], &win1->lines[y - win1->begy]->line[startx - win1->begx], x * __LDATASIZE); __touchline(win2, y, startx - win2->begx, endx - win2->begx, 0); } return (OK); } vigor-0.016.orig/curses/ctrace.c0100644000076400007640000000472007103707250015203 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)ctrace.c 8.2 (Berkeley) 10/5/93"; #endif /* not lint */ #ifdef CURSES_DEBUG #include #ifdef __STDC__ #include #else #include #endif #ifndef TFILE #define TFILE "__curses.out" #endif static FILE *tracefp; /* Curses debugging file descriptor. */ void #ifdef __STDC__ __CTRACE(const char *fmt, ...) #else __CTRACE(fmt, va_alist) char *fmt; va_dcl #endif { va_list ap; #ifdef __STDC__ va_start(ap, fmt); #else va_start(ap); #endif if (tracefp == NULL) tracefp = fopen(TFILE, "w"); if (tracefp == NULL) return; (void)vfprintf(tracefp, fmt, ap); va_end(ap); (void)fflush(tracefp); } #endif vigor-0.016.orig/curses/putchar.c0100644000076400007640000000404107103707250015404 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)putchar.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" void __cputchar(ch) int ch; { #ifdef CURSES_DEBUG __CTRACE("__cputchar: %s\n", unctrl(ch)); #endif (void)putchar(ch); } vigor-0.016.orig/curses/refresh.c0100644000076400007640000005543307103707250015407 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)refresh.c 8.7 (Berkeley) 8/13/94"; #endif /* not lint */ #include #include "curses.h" static int curwin; static short ly, lx; static void domvcur(); static int makech(); static void quickch(); static void scrolln(); /* * wrefresh -- * Make the current screen look like "win" over the area coverd by * win. */ int wrefresh(win) register WINDOW *win; { register __LINE *wlp; register int retval; register short wy; int dnum; /* Initialize loop parameters. */ ly = curscr->cury; lx = curscr->curx; wy = 0; curwin = (win == curscr); if (!curwin) for (wy = 0; wy < win->maxy; wy++) { wlp = win->lines[wy]; if (wlp->flags & __ISDIRTY) wlp->hash = __hash((char *)wlp->line, win->maxx * __LDATASIZE); } if (win->flags & __CLEAROK || curscr->flags & __CLEAROK || curwin) { if ((win->flags & __FULLWIN) || curscr->flags & __CLEAROK) { tputs(CL, 0, __cputchar); ly = 0; lx = 0; if (!curwin) { curscr->flags &= ~__CLEAROK; curscr->cury = 0; curscr->curx = 0; werase(curscr); } __touchwin(win); } win->flags &= ~__CLEAROK; } if (!CA) { if (win->curx != 0) putchar('\n'); if (!curwin) werase(curscr); } #ifdef CURSES_DEBUG __CTRACE("wrefresh: (%0.2o): curwin = %d\n", win, curwin); __CTRACE("wrefresh: \tfirstch\tlastch\n"); #endif #ifndef NOQCH if ((win->flags & __FULLWIN) && !curwin) { /* * Invoke quickch() only if more than a quarter of the lines * in the window are dirty. */ for (wy = 0, dnum = 0; wy < win->maxy; wy++) if (win->lines[wy]->flags & (__ISDIRTY | __FORCEPAINT)) dnum++; if (!__noqch && dnum > (int) win->maxy / 4) quickch(win); } #endif #ifdef CURSES_DEBUG { int i, j; __CTRACE("#####################################\n"); for (i = 0; i < curscr->maxy; i++) { __CTRACE("C: %d:", i); __CTRACE(" 0x%x \n", curscr->lines[i]->hash); for (j = 0; j < curscr->maxx; j++) __CTRACE("%c", curscr->lines[i]->line[j].ch); __CTRACE("\n"); for (j = 0; j < curscr->maxx; j++) __CTRACE("%x", curscr->lines[i]->line[j].attr); __CTRACE("\n"); __CTRACE("W: %d:", i); __CTRACE(" 0x%x \n", win->lines[i]->hash); __CTRACE(" 0x%x ", win->lines[i]->flags); for (j = 0; j < win->maxx; j++) __CTRACE("%c", win->lines[i]->line[j].ch); __CTRACE("\n"); for (j = 0; j < win->maxx; j++) __CTRACE("%x", win->lines[i]->line[j].attr); __CTRACE("\n"); } } #endif /* CURSES_DEBUG */ for (wy = 0; wy < win->maxy; wy++) { #ifdef CURSES_DEBUG __CTRACE("%d\t%d\t%d\n", wy, *win->lines[wy]->firstchp, *win->lines[wy]->lastchp); #endif if (!curwin) curscr->lines[wy]->hash = win->lines[wy]->hash; if (win->lines[wy]->flags & (__ISDIRTY | __FORCEPAINT)) { if (makech(win, wy) == ERR) return (ERR); else { if (*win->lines[wy]->firstchp >= win->ch_off) *win->lines[wy]->firstchp = win->maxx + win->ch_off; if (*win->lines[wy]->lastchp < win->maxx + win->ch_off) *win->lines[wy]->lastchp = win->ch_off; if (*win->lines[wy]->lastchp < *win->lines[wy]->firstchp) { #ifdef CURSES_DEBUG __CTRACE("wrefresh: line %d notdirty \n", wy); #endif win->lines[wy]->flags &= ~__ISDIRTY; } } } #ifdef CURSES_DEBUG __CTRACE("\t%d\t%d\n", *win->lines[wy]->firstchp, *win->lines[wy]->lastchp); #endif } #ifdef CURSES_DEBUG __CTRACE("refresh: ly=%d, lx=%d\n", ly, lx); #endif if (win == curscr) domvcur(ly, lx, win->cury, win->curx); else { if (win->flags & __LEAVEOK) { curscr->cury = ly; curscr->curx = lx; ly -= win->begy; lx -= win->begx; if (ly >= 0 && ly < win->maxy && lx >= 0 && lx < win->maxx) { win->cury = ly; win->curx = lx; } else win->cury = win->curx = 0; } else { domvcur(ly, lx, win->cury + win->begy, win->curx + win->begx); curscr->cury = win->cury + win->begy; curscr->curx = win->curx + win->begx; } } retval = OK; (void)fflush(stdout); return (retval); } /* * makech -- * Make a change on the screen. */ static int makech(win, wy) register WINDOW *win; int wy; { static __LDATA blank = {' ', 0}; __LDATA *nsp, *csp, *cp, *cep; u_int force; int clsp, nlsp; /* Last space in lines. */ int lch, wx, y; char *ce; /* Is the cursor still on the end of the last line? */ if (wy > 0 && win->lines[wy - 1]->flags & __ISPASTEOL) { domvcur(ly, lx, ly + 1, 0); ly++; lx = 0; } wx = *win->lines[wy]->firstchp - win->ch_off; if (wx < 0) wx = 0; else if (wx >= win->maxx) return (OK); lch = *win->lines[wy]->lastchp - win->ch_off; if (lch < 0) return (OK); else if (lch >= (int) win->maxx) lch = win->maxx - 1; y = wy + win->begy; if (curwin) csp = ␣ else csp = &curscr->lines[wy + win->begy]->line[wx + win->begx]; nsp = &win->lines[wy]->line[wx]; force = win->lines[wy]->flags & __FORCEPAINT; win->lines[wy]->flags &= ~__FORCEPAINT; if (CE && !curwin) { for (cp = &win->lines[wy]->line[win->maxx - 1]; cp->ch == ' ' && cp->attr == 0; cp--) if (cp <= win->lines[wy]->line) break; nlsp = cp - win->lines[wy]->line; } if (!curwin) ce = CE; else ce = NULL; if (force) { if (CM) tputs(tgoto(CM, lx, ly), 0, __cputchar); else { tputs(HO, 0, __cputchar); __mvcur(0, 0, ly, lx, 1); } } while (wx <= lch) { if (!force && memcmp(nsp, csp, sizeof(__LDATA)) == 0) { if (wx <= lch) { while (wx <= lch && memcmp(nsp, csp, sizeof(__LDATA)) == 0) { nsp++; if (!curwin) ++csp; ++wx; } continue; } break; } domvcur(ly, lx, y, wx + win->begx); #ifdef CURSES_DEBUG __CTRACE("makech: 1: wx = %d, ly= %d, lx = %d, newy = %d, newx = %d, force =%d\n", wx, ly, lx, y, wx + win->begx, force); #endif ly = y; lx = wx + win->begx; while (wx <= lch && (force || memcmp(nsp, csp, sizeof(__LDATA)) != 0)) { if (ce != NULL && win->maxx + win->begx == curscr->maxx && wx >= nlsp && nsp->ch == ' ' && nsp->attr == 0) { /* Check for clear to end-of-line. */ cep = &curscr->lines[wy]->line[win->maxx - 1]; while (cep->ch == ' ' && cep->attr == 0) if (cep-- <= csp) break; clsp = cep - curscr->lines[wy]->line - win->begx * __LDATASIZE; #ifdef CURSES_DEBUG __CTRACE("makech: clsp = %d, nlsp = %d\n", clsp, nlsp); #endif if ((clsp - nlsp >= strlen(CE) && clsp < win->maxx * __LDATASIZE) || wy == win->maxy - 1) { if (curscr->flags & __WSTANDOUT) { tputs(SE, 0, __cputchar); curscr->flags &= ~__WSTANDOUT; } tputs(CE, 0, __cputchar); lx = wx + win->begx; while (wx++ <= clsp) { csp->ch = ' '; csp->attr = 0; csp++; } return (OK); } ce = NULL; } /* * Enter/exit standout mode as appropriate. * XXX * Should use UC if SO/SE not available. */ if (nsp->attr & __STANDOUT) { if (!(curscr->flags & __WSTANDOUT) && SO != NULL && SE != NULL) { tputs(SO, 0, __cputchar); curscr->flags |= __WSTANDOUT; } } else if (curscr->flags & __WSTANDOUT && SE != NULL) { tputs(SE, 0, __cputchar); curscr->flags &= ~__WSTANDOUT; } wx++; if (wx >= win->maxx && wy == win->maxy - 1 && !curwin) if (win->flags & __SCROLLOK) { if (curscr->flags & __WSTANDOUT && win->flags & __ENDLINE) if (!MS) { tputs(SE, 0, __cputchar); curscr->flags &= ~__WSTANDOUT; } if (!(win->flags & __SCROLLWIN)) { if (!curwin) { csp->attr = nsp->attr; putchar(csp->ch = nsp->ch); } else putchar(nsp->ch); } if (wx + win->begx < curscr->maxx) { domvcur(ly, wx + win->begx, win->begy + win->maxy - 1, win->begx + win->maxx - 1); } ly = win->begy + win->maxy - 1; lx = win->begx + win->maxx - 1; return (OK); } if (wx < win->maxx || wy < win->maxy - 1 || !(win->flags & __SCROLLWIN)) { if (!curwin) { csp->attr = nsp->attr; putchar(csp->ch = nsp->ch); csp++; } else putchar(nsp->ch); } #ifdef CURSES_DEBUG __CTRACE("makech: putchar(%c)\n", nsp->ch & 0177); #endif if (UC && (nsp->attr & __STANDOUT)) { putchar('\b'); tputs(UC, 0, __cputchar); } nsp++; #ifdef CURSES_DEBUG __CTRACE("makech: 2: wx = %d, lx = %d\n", wx, lx); #endif } if (lx == wx + win->begx) /* If no change. */ break; lx = wx + win->begx; if (lx >= COLS && AM) lx = COLS - 1; else if (wx >= win->maxx) { domvcur(ly, lx, ly, win->maxx + win->begx - 1); lx = win->maxx + win->begx - 1; } #ifdef CURSES_DEBUG __CTRACE("makech: 3: wx = %d, lx = %d\n", wx, lx); #endif } /* Don't leave the screen in standout mode. */ if (curscr->flags & __WSTANDOUT) { tputs(SE, 0, __cputchar); curscr->flags &= ~__WSTANDOUT; } return (OK); } /* * domvcur -- * Do a mvcur, leaving standout mode if necessary. */ static void domvcur(oy, ox, ny, nx) int oy, ox, ny, nx; { if (curscr->flags & __WSTANDOUT && !MS) { tputs(SE, 0, __cputchar); curscr->flags &= ~__WSTANDOUT; } __mvcur(oy, ox, ny, nx, 1); } /* * Quickch() attempts to detect a pattern in the change of the window * in order to optimize the change, e.g., scroll n lines as opposed to * repainting the screen line by line. */ static void quickch(win) WINDOW *win; { #define THRESH (int) win->maxy / 4 register __LINE *clp, *tmp1, *tmp2; register int bsize, curs, curw, starts, startw, i, j; int n, target, cur_period, bot, top, sc_region; __LDATA buf[1024]; u_int blank_hash; /* * Find how many lines from the top of the screen are unchanged. */ for (top = 0; top < win->maxy; top++) if (win->lines[top]->flags & __FORCEPAINT || win->lines[top]->hash != curscr->lines[top]->hash || memcmp(win->lines[top]->line, curscr->lines[top]->line, win->maxx * __LDATASIZE) != 0) break; else win->lines[top]->flags &= ~__ISDIRTY; /* * Find how many lines from bottom of screen are unchanged. */ for (bot = win->maxy - 1; bot >= 0; bot--) if (win->lines[bot]->flags & __FORCEPAINT || win->lines[bot]->hash != curscr->lines[bot]->hash || memcmp(win->lines[bot]->line, curscr->lines[bot]->line, win->maxx * __LDATASIZE) != 0) break; else win->lines[bot]->flags &= ~__ISDIRTY; #ifdef NO_JERKINESS /* * If we have a bottom unchanged region return. Scrolling the * bottom region up and then back down causes a screen jitter. * This will increase the number of characters sent to the screen * but it looks better. */ if (bot < win->maxy - 1) return; #endif /* NO_JERKINESS */ /* * Search for the largest block of text not changed. * Invariants of the loop: * - Startw is the index of the beginning of the examined block in win. * - Starts is the index of the beginning of the examined block in * curscr. * - Curs is the index of one past the end of the exmined block in win. * - Curw is the index of one past the end of the exmined block in * curscr. * - bsize is the current size of the examined block. */ for (bsize = bot - top; bsize >= THRESH; bsize--) { for (startw = top; startw <= bot - bsize; startw++) for (starts = top; starts <= bot - bsize; starts++) { for (curw = startw, curs = starts; curs < starts + bsize; curw++, curs++) if (win->lines[curw]->flags & __FORCEPAINT || (win->lines[curw]->hash != curscr->lines[curs]->hash || memcmp(win->lines[curw]->line, curscr->lines[curs]->line, win->maxx * __LDATASIZE) != 0)) break; if (curs == starts + bsize) goto done; } } done: /* Did not find anything */ if (bsize < THRESH) return; #ifdef CURSES_DEBUG __CTRACE("quickch:bsize=%d,starts=%d,startw=%d,curw=%d,curs=%d,top=%d,bot=%d\n", bsize, starts, startw, curw, curs, top, bot); #endif /* * Make sure that there is no overlap between the bottom and top * regions and the middle scrolled block. */ if (bot < curs) bot = curs - 1; if (top > starts) top = starts; n = startw - starts; #ifdef CURSES_DEBUG __CTRACE("#####################################\n"); for (i = 0; i < curscr->maxy; i++) { __CTRACE("C: %d:", i); __CTRACE(" 0x%x \n", curscr->lines[i]->hash); for (j = 0; j < curscr->maxx; j++) __CTRACE("%c", curscr->lines[i]->line[j].ch); __CTRACE("\n"); for (j = 0; j < curscr->maxx; j++) __CTRACE("%x", curscr->lines[i]->line[j].attr); __CTRACE("\n"); __CTRACE("W: %d:", i); __CTRACE(" 0x%x \n", win->lines[i]->hash); __CTRACE(" 0x%x ", win->lines[i]->flags); for (j = 0; j < win->maxx; j++) __CTRACE("%c", win->lines[i]->line[j].ch); __CTRACE("\n"); for (j = 0; j < win->maxx; j++) __CTRACE("%x", win->lines[i]->line[j].attr); __CTRACE("\n"); } #endif /* So we don't have to call __hash() each time */ for (i = 0; i < win->maxx; i++) { buf[i].ch = ' '; buf[i].attr = 0; } blank_hash = __hash((char *) buf, win->maxx * __LDATASIZE); /* * Perform the rotation to maintain the consistency of curscr. * This is hairy since we are doing an *in place* rotation. * Invariants of the loop: * - I is the index of the current line. * - Target is the index of the target of line i. * - Tmp1 points to current line (i). * - Tmp2 and points to target line (target); * - Cur_period is the index of the end of the current period. * (see below). * * There are 2 major issues here that make this rotation non-trivial: * 1. Scrolling in a scrolling region bounded by the top * and bottom regions determined (whose size is sc_region). * 2. As a result of the use of the mod function, there may be a * period introduced, i.e., 2 maps to 4, 4 to 6, n-2 to 0, and * 0 to 2, which then causes all odd lines not to be rotated. * To remedy this, an index of the end ( = beginning) of the * current 'period' is kept, cur_period, and when it is reached, * the next period is started from cur_period + 1 which is * guaranteed not to have been reached since that would mean that * all records would have been reached. (think about it...). * * Lines in the rotation can have 3 attributes which are marked on the * line so that curscr is consistent with the visual screen. * 1. Not dirty -- lines inside the scrolled block, top region or * bottom region. * 2. Blank lines -- lines in the differential of the scrolling * region adjacent to top and bot regions * depending on scrolling direction. * 3. Dirty line -- all other lines are marked dirty. */ sc_region = bot - top + 1; i = top; tmp1 = curscr->lines[top]; cur_period = top; for (j = top; j <= bot; j++) { target = (i - top + n + sc_region) % sc_region + top; tmp2 = curscr->lines[target]; curscr->lines[target] = tmp1; /* Mark block as clean and blank out scrolled lines. */ clp = curscr->lines[target]; #ifdef CURSES_DEBUG __CTRACE("quickch: n=%d startw=%d curw=%d i = %d target=%d ", n, startw, curw, i, target); #endif if ((target >= startw && target < curw) || target < top || target > bot) { #ifdef CURSES_DEBUG __CTRACE("-- notdirty"); #endif win->lines[target]->flags &= ~__ISDIRTY; } else if ((n > 0 && target >= top && target < top + n) || (n < 0 && target <= bot && target > bot + n)) { if (clp->hash != blank_hash || memcmp(clp->line, buf, win->maxx * __LDATASIZE) !=0) { (void)memcpy(clp->line, buf, win->maxx * __LDATASIZE); #ifdef CURSES_DEBUG __CTRACE("-- blanked out: dirty"); #endif clp->hash = blank_hash; __touchline(win, target, 0, win->maxx - 1, 0); } else { __touchline(win, target, 0, win->maxx - 1, 0); #ifdef CURSES_DEBUG __CTRACE(" -- blank line already: dirty"); #endif } } else { #ifdef CURSES_DEBUG __CTRACE(" -- dirty"); #endif __touchline(win, target, 0, win->maxx - 1, 0); } #ifdef CURSES_DEBUG __CTRACE("\n"); #endif if (target == cur_period) { i = target; /* * XXX * Yikes! i can be larger than the curscr->lines * array coming out of the above mess. I don't * pretend to understand it, but dropping core is * worse. */ if (i < curscr->maxy - 1) ++i; tmp1 = curscr->lines[i]; cur_period = i; } else { tmp1 = tmp2; i = target; } } #ifdef CURSES_DEBUG __CTRACE("$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$\n"); for (i = 0; i < curscr->maxy; i++) { __CTRACE("C: %d:", i); for (j = 0; j < curscr->maxx; j++) __CTRACE("%c", curscr->lines[i]->line[j].ch); __CTRACE("\n"); __CTRACE("W: %d:", i); for (j = 0; j < win->maxx; j++) __CTRACE("%c", win->lines[i]->line[j].ch); __CTRACE("\n"); } #endif if (n != 0) { WINDOW *wp; scrolln(win, starts, startw, curs, bot, top); /* * Need to repoint any subwindow lines to the rotated * line structured. */ for (wp = win->nextp; wp != win; wp = wp->nextp) __set_subwin(win, wp); } } /* * scrolln -- * Scroll n lines, where n is starts - startw. */ static void scrolln(win, starts, startw, curs, bot, top) WINDOW *win; int starts, startw, curs, bot, top; { int i, oy, ox, n; oy = curscr->cury; ox = curscr->curx; n = starts - startw; /* * XXX * The initial tests that set __noqch don't let us reach here unless * we have either CS + HO + SF/sf/SR/sr, or AL + DL. SF/sf and SR/sr * scrolling can only shift the entire scrolling region, not just a * part of it, which means that the quickch() routine is going to be * sadly disappointed in us if we don't have CS as well. * * If CS, HO and SF/sf are set, can use the scrolling region. Because * the cursor position after CS is undefined, we need HO which gives us * the ability to move to somewhere without knowledge of the current * location of the cursor. Still call __mvcur() anyway, to update its * idea of where the cursor is. * * When the scrolling region has been set, the cursor has to be at the * last line of the region to make the scroll happen. * * Doing SF/SR or AL/DL appears faster on the screen than either sf/sr * or al/dl, and, some terminals have AL/DL, sf/sr, and CS, but not * SF/SR. So, if we're scrolling almost all of the screen, try and use * AL/DL, otherwise use the scrolling region. The "almost all" is a * shameless hack for vi. */ if (n > 0) { if (CS != NULL && HO != NULL && (SF != NULL || (AL == NULL || DL == NULL || top > 3 || bot + 3 < win->maxy) && sf != NULL)) { tputs(__tscroll(CS, top, bot + 1), 0, __cputchar); __mvcur(oy, ox, 0, 0, 1); tputs(HO, 0, __cputchar); __mvcur(0, 0, bot, 0, 1); if (SF != NULL) tputs(__tscroll(SF, n, 0), 0, __cputchar); else for (i = 0; i < n; i++) tputs(sf, 0, __cputchar); tputs(__tscroll(CS, 0, win->maxy), 0, __cputchar); __mvcur(bot, 0, 0, 0, 1); tputs(HO, 0, __cputchar); __mvcur(0, 0, oy, ox, 1); return; } /* Scroll up the block. */ if (SF != NULL && top == 0) { __mvcur(oy, ox, bot, 0, 1); tputs(__tscroll(SF, n, 0), 0, __cputchar); } else if (DL != NULL) { __mvcur(oy, ox, top, 0, 1); tputs(__tscroll(DL, n, 0), 0, __cputchar); } else if (dl != NULL) { __mvcur(oy, ox, top, 0, 1); for (i = 0; i < n; i++) tputs(dl, 0, __cputchar); } else if (sf != NULL && top == 0) { __mvcur(oy, ox, bot, 0, 1); for (i = 0; i < n; i++) tputs(sf, 0, __cputchar); } else abort(); /* Push down the bottom region. */ __mvcur(top, 0, bot - n + 1, 0, 1); if (AL != NULL) tputs(__tscroll(AL, n, 0), 0, __cputchar); else if (al != NULL) for (i = 0; i < n; i++) tputs(al, 0, __cputchar); else abort(); __mvcur(bot - n + 1, 0, oy, ox, 1); } else { /* * !!! * n < 0 * * If CS, HO and SR/sr are set, can use the scrolling region. * See the above comments for details. */ if (CS != NULL && HO != NULL && (SR != NULL || (AL == NULL || DL == NULL || top > 3 || bot + 3 < win->maxy) && sr != NULL)) { tputs(__tscroll(CS, top, bot + 1), 0, __cputchar); __mvcur(oy, ox, 0, 0, 1); tputs(HO, 0, __cputchar); __mvcur(0, 0, top, 0, 1); if (SR != NULL) tputs(__tscroll(SR, -n, 0), 0, __cputchar); else for (i = n; i < 0; i++) tputs(sr, 0, __cputchar); tputs(__tscroll(CS, 0, win->maxy), 0, __cputchar); __mvcur(top, 0, 0, 0, 1); tputs(HO, 0, __cputchar); __mvcur(0, 0, oy, ox, 1); return; } /* Preserve the bottom lines. */ __mvcur(oy, ox, bot + n + 1, 0, 1); if (SR != NULL && bot == win->maxy) tputs(__tscroll(SR, -n, 0), 0, __cputchar); else if (DL != NULL) tputs(__tscroll(DL, -n, 0), 0, __cputchar); else if (dl != NULL) for (i = n; i < 0; i++) tputs(dl, 0, __cputchar); else if (sr != NULL && bot == win->maxy) for (i = n; i < 0; i++) tputs(sr, 0, __cputchar); else abort(); /* Scroll the block down. */ __mvcur(bot + n + 1, 0, top, 0, 1); if (AL != NULL) tputs(__tscroll(AL, -n, 0), 0, __cputchar); else if (al != NULL) for (i = n; i < 0; i++) tputs(al, 0, __cputchar); else abort(); __mvcur(top, 0, oy, ox, 1); } } vigor-0.016.orig/curses/scroll.c0100644000076400007640000000456507103707250015247 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)scroll.c 8.3 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * scroll -- * Scroll the window up a line. */ int scroll(win) register WINDOW *win; { register int oy, ox; #ifdef CURSES_DEBUG __CTRACE("scroll: (%0.2o)\n", win); #endif if (!(win->flags & __SCROLLOK)) return (ERR); getyx(win, oy, ox); wmove(win, 0, 0); wdeleteln(win); wmove(win, oy, ox); if (win == curscr) { putchar('\n'); if (!NONL) win->curx = 0; #ifdef CURSES_DEBUG __CTRACE("scroll: win == curscr\n"); #endif } return (OK); } vigor-0.016.orig/curses/setterm.c0100644000076400007640000001454107103707250015427 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)setterm.c 8.8 (Berkeley) 10/25/94"; #endif /* not lint */ #include /* TIOCGWINSZ on old systems. */ #include #include #include #include #include "curses.h" static void zap(); static char *sflags[] = { /* am bs da eo hc in mi ms */ &AM, &BS, &DA, &EO, &HC, &IN, &MI, &MS, /* nc ns os ul xb xn xt xs xx */ &NC, &NS, &OS, &UL, &XB, &XN, &XT, &XS, &XX }; static char *_PC, **sstrs[] = { /* AL bc bt cd ce cl cm cr cs */ &AL, &BC, &BT, &CD, &CE, &CL, &CM, &CR, &CS, /* dc DL dm do ed ei k0 k1 k2 */ &DC, &DL, &DM, &DO, &ED, &EI, &K0, &K1, &K2, /* k3 k4 k5 k6 k7 k8 k9 ho ic */ &K3, &K4, &K5, &K6, &K7, &K8, &K9, &HO, &IC, /* im ip kd ke kh kl kr ks ku */ &IM, &IP, &KD, &KE, &KH, &KL, &KR, &KS, &KU, /* ll ma nd nl pc rc sc se SF */ &LL, &MA, &ND, &NL, &_PC, &RC, &SC, &SE, &SF, /* so SR ta te ti uc ue up us */ &SO, &SR, &TA, &TE, &TI, &UC, &UE, &UP, &US, /* vb vs ve al dl sf sr AL */ &VB, &VS, &VE, &al, &dl, &sf, &sr, &AL_PARM, /* DL UP DO LE */ &DL_PARM, &UP_PARM, &DOWN_PARM, &LEFT_PARM, /* RI */ &RIGHT_PARM, }; static char *aoftspace; /* Address of _tspace for relocation */ static char tspace[2048]; /* Space for capability strings */ int setterm(type) register char *type; { static char genbuf[1024]; register int unknown; #ifdef TIOCGWINSZ struct winsize win; #endif char *p; #ifdef CURSES_DEBUG __CTRACE("setterm: (\"%s\")\nLINES = %d, COLS = %d\n", type, LINES, COLS); #endif if (type[0] == '\0') type = "xx"; unknown = 0; if (tgetent(genbuf, type) != 1) { unknown++; strcpy(genbuf, "xx|dumb:"); } #ifdef CURSES_DEBUG __CTRACE("setterm: tty = %s\n", type); #endif #ifdef TIOCGWINSZ /* Try TIOCGWINSZ, and, if it fails, the termcap entry. */ if (ioctl(STDERR_FILENO, TIOCGWINSZ, &win) != -1 && win.ws_row != 0 && win.ws_col != 0) { LINES = win.ws_row; COLS = win.ws_col; } else { #endif LINES = tgetnum("li"); COLS = tgetnum("co"); #ifdef TIOCGWINSZ } #endif /* POSIX 1003.2 requires that the environment override. */ if ((p = getenv("LINES")) != NULL) LINES = strtol(p, NULL, 10); if ((p = getenv("COLUMNS")) != NULL) COLS = strtol(p, NULL, 10); /* * Want cols > 4, otherwise things will fail. */ if (COLS <= 4) return (ERR); #ifdef CURSES_DEBUG __CTRACE("setterm: LINES = %d, COLS = %d\n", LINES, COLS); #endif aoftspace = tspace; zap(); /* Get terminal description. */ /* If we can't tab, we can't backtab, either. */ if (!GT) BT = NULL; /* * Test for cursor motion capbility. * * XXX * This is truly stupid -- historically, tgoto returns "OOPS" if it * can't do cursor motions. Some systems have been fixed to return * a NULL pointer. */ if ((p = tgoto(CM, 0, 0)) == NULL || *p == 'O') { CA = 0; CM = 0; } else CA = 1; PC = _PC ? _PC[0] : 0; aoftspace = tspace; /* If no scrolling commands, no quick change. */ __noqch = (CS == NULL || HO == NULL || SF == NULL && sf == NULL || SR == NULL && sr == NULL) && (AL == NULL && al == NULL || DL == NULL && dl == NULL); return (unknown ? ERR : OK); } /* * zap -- * Gets all the terminal flags from the termcap database. */ static void zap() { register char *namp, ***sp; register char **fp; char tmp[3]; #ifdef CURSES_DEBUG register char *cp; #endif tmp[2] = '\0'; namp = "ambsdaeohcinmimsncnsosulxbxnxtxsxx"; fp = sflags; do { *tmp = *namp; *(tmp + 1) = *(namp + 1); *(*fp++) = tgetflag(tmp); #ifdef CURSES_DEBUG __CTRACE("2.2s = %s\n", namp, *fp[-1] ? "TRUE" : "FALSE"); #endif namp += 2; } while (*namp); namp = "ALbcbtcdceclcmcrcsdcDLdmdoedeik0k1k2k3k4k5k6k7k8k9hoicimipkdkekhklkrkskullmandnlpcrcscseSFsoSRtatetiucueupusvbvsvealdlsfsrALDLUPDOLERI"; sp = sstrs; do { *tmp = *namp; *(tmp + 1) = *(namp + 1); *(*sp++) = tgetstr(tmp, &aoftspace); #ifdef CURSES_DEBUG __CTRACE("2.2s = %s", namp, *sp[-1] == NULL ? "NULL\n" : "\""); if (*sp[-1] != NULL) { for (cp = *sp[-1]; *cp; cp++) __CTRACE("%s", unctrl(*cp)); __CTRACE("\"\n"); } #endif namp += 2; } while (*namp); if (XS) SO = SE = NULL; else { if (tgetnum("sg") > 0) SO = NULL; if (tgetnum("ug") > 0) US = NULL; if (!SO && US) { SO = US; SE = UE; } } } /* * getcap -- * Return a capability from termcap. */ char * getcap(name) char *name; { return (tgetstr(name, &aoftspace)); } vigor-0.016.orig/curses/standout.c0100644000076400007640000000445307103707250015606 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)standout.c 8.3 (Berkeley) 8/10/94"; #endif /* not lint */ #include "curses.h" /* * wstandout * Enter standout mode. */ int wstandout(win) WINDOW *win; { /* * If standout/standend strings, or can underline, set the * screen standout bit. */ if (SO != NULL && SE != NULL || UC != NULL) win->flags |= __WSTANDOUT; return (1); } /* * wstandend -- * Exit standout mode. */ int wstandend(win) WINDOW *win; { win->flags &= ~__WSTANDOUT; return (1); } vigor-0.016.orig/curses/unctrl.c0100644000076400007640000001116607103707250015253 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)unctrl.c 8.1 (Berkeley) 6/4/93"; #endif /* not lint */ char * __unctrl[256] = { "^@", "^A", "^B", "^C", "^D", "^E", "^F", "^G", "^H", "^I", "^J", "^K", "^L", "^M", "^N", "^O", "^P", "^Q", "^R", "^S", "^T", "^U", "^V", "^W", "^X", "^Y", "^Z", "^[", "^\\", "^]", "^~", "^_", " ", "!", "\"", "#", "$", "%", "&", "'", "(", ")", "*", "+", ",", "-", ".", "/", "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", ":", ";", "<", "=", ">", "?", "@", "A", "B", "C", "D", "E", "F", "G", "H", "I", "J", "K", "L", "M", "N", "O", "P", "Q", "R", "S", "T", "U", "V", "W", "X", "Y", "Z", "[", "\\", "]", "^", "_", "`", "a", "b", "c", "d", "e", "f", "g", "h", "i", "j", "k", "l", "m", "n", "o", "p", "q", "r", "s", "t", "u", "v", "w", "x", "y", "z", "{", "|", "}", "~", "^?", "0x80", "0x81", "0x82", "0x83", "0x84", "0x85", "0x86", "0x87", "0x88", "0x89", "0x8a", "0x8b", "0x8c", "0x8d", "0x8e", "0x8f", "0x90", "0x91", "0x92", "0x93", "0x94", "0x95", "0x96", "0x97", "0x98", "0x99", "0x9a", "0x9b", "0x9c", "0x9d", "0x9e", "0x9f", "0xa0", "0xa1", "0xa2", "0xa3", "0xa4", "0xa5", "0xa6", "0xa7", "0xa8", "0xa9", "0xaa", "0xab", "0xac", "0xad", "0xae", "0xaf", "0xb0", "0xb1", "0xb2", "0xb3", "0xb4", "0xb5", "0xb6", "0xb7", "0xb8", "0xb9", "0xba", "0xbb", "0xbc", "0xbd", "0xbe", "0xbf", "0xc0", "0xc1", "0xc2", "0xc3", "0xc4", "0xc5", "0xc6", "0xc7", "0xc8", "0xc9", "0xca", "0xcb", "0xcc", "0xcd", "0xce", "0xcf", "0xd0", "0xd1", "0xd2", "0xd3", "0xd4", "0xd5", "0xd6", "0xd7", "0xd8", "0xd9", "0xda", "0xdb", "0xdc", "0xdd", "0xde", "0xdf", "0xe0", "0xe1", "0xe2", "0xe3", "0xe4", "0xe5", "0xe6", "0xe7", "0xe8", "0xe9", "0xea", "0xeb", "0xec", "0xed", "0xee", "0xef", "0xf0", "0xf1", "0xf2", "0xf3", "0xf4", "0xf5", "0xf6", "0xf7", "0xf8", "0xf9", "0xfa", "0xfb", "0xfc", "0xfd", "0xfe", "0xff", }; char __unctrllen[256] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, }; vigor-0.016.orig/curses/tty.c0100644000076400007640000001640107103707250014561 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)tty.c 8.6 (Berkeley) 1/10/95"; #endif /* not lint */ #include #include #include #include "curses.h" /* * In general, curses should leave tty hardware settings alone (speed, parity, * word size). This is most easily done in BSD by using TCSASOFT on all * tcsetattr calls. On other systems, it would be better to get and restore * those attributes at each change, or at least when stopped and restarted. * See also the comments in getterm(). */ #ifdef TCSASOFT int __tcaction = 1; /* Ignore hardware settings. */ #else int __tcaction = 0; #endif struct termios __orig_termios, __baset; static struct termios cbreakt, rawt, *curt; static int useraw; #ifndef OXTABS #ifdef XTABS /* SMI uses XTABS. */ #define OXTABS XTABS #else #define OXTABS 0 #endif #endif /* * gettmode -- * Do terminal type initialization. */ int gettmode() { useraw = 0; if (tcgetattr(STDIN_FILENO, &__orig_termios)) return (ERR); __baset = __orig_termios; __baset.c_oflag &= ~OXTABS; GT = 0; /* historical. was used before we wired OXTABS off */ NONL = (__baset.c_oflag & ONLCR) == 0; /* * XXX * System V and SMI systems overload VMIN and VTIME, such that * VMIN is the same as the VEOF element, and VTIME is the same * as the VEOL element. This means that, if VEOF was ^D, the * default VMIN is 4. Majorly stupid. */ cbreakt = __baset; cbreakt.c_lflag &= ~ICANON; cbreakt.c_cc[VMIN] = 1; cbreakt.c_cc[VTIME] = 0; rawt = cbreakt; rawt.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|INLCR|IGNCR|ICRNL|IXON); rawt.c_oflag &= ~OPOST; rawt.c_lflag &= ~(ECHO|ECHONL|ICANON|ISIG|IEXTEN); /* * In general, curses should leave hardware-related settings alone. * This includes parity and word size. Older versions set the tty * to 8 bits, no parity in raw(), but this is considered to be an * artifact of the old tty interface. If it's desired to change * parity and word size, the TCSASOFT bit has to be removed from the * calls that switch to/from "raw" mode. */ if (!__tcaction) { rawt.c_iflag &= ~ISTRIP; rawt.c_cflag &= ~(CSIZE|PARENB); rawt.c_cflag |= CS8; } curt = &__baset; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int raw() { useraw = __pfast = __rawmode = 1; curt = &rawt; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int noraw() { useraw = __pfast = __rawmode = 0; curt = &__baset; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int cbreak() { __rawmode = 1; curt = useraw ? &rawt : &cbreakt; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int nocbreak() { __rawmode = 0; curt = useraw ? &rawt : &__baset; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int echo() { rawt.c_lflag |= ECHO; cbreakt.c_lflag |= ECHO; __baset.c_lflag |= ECHO; __echoit = 1; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int noecho() { rawt.c_lflag &= ~ECHO; cbreakt.c_lflag &= ~ECHO; __baset.c_lflag &= ~ECHO; __echoit = 0; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int nl() { rawt.c_iflag |= ICRNL; rawt.c_oflag |= ONLCR; cbreakt.c_iflag |= ICRNL; cbreakt.c_oflag |= ONLCR; __baset.c_iflag |= ICRNL; __baset.c_oflag |= ONLCR; __pfast = __rawmode; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } int nonl() { rawt.c_iflag &= ~ICRNL; rawt.c_oflag &= ~ONLCR; cbreakt.c_iflag &= ~ICRNL; cbreakt.c_oflag &= ~ONLCR; __baset.c_iflag &= ~ICRNL; __baset.c_oflag &= ~ONLCR; __pfast = 1; return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, curt) ? ERR : OK); } void __startwin() { static char *stdbuf; static size_t len; (void)fflush(stdout); /* * Some C libraries default to a 1K buffer when talking to a tty. * With a larger screen, especially across a network, we'd like * to get it to all flush in a single write. Make it twice as big * as just the characters (so that we have room for cursor motions * and standout information) but no more than 8K. */ if (stdbuf == NULL) { if ((len = LINES * COLS * 2) > 8192) len = 8192; if ((stdbuf = malloc(len)) == NULL) len = 0; } (void)setvbuf(stdout, stdbuf, _IOFBF, len); tputs(TI, 0, __cputchar); tputs(VS, 0, __cputchar); } int endwin() { __restore_stophandler(); if (curscr != NULL) { if (curscr->flags & __WSTANDOUT) { tputs(SE, 0, __cputchar); curscr->flags &= ~__WSTANDOUT; } __mvcur(curscr->cury, curscr->curx, curscr->maxy - 1, 0, 0); } (void)tputs(VE, 0, __cputchar); (void)tputs(TE, 0, __cputchar); (void)fflush(stdout); (void)setvbuf(stdout, NULL, _IOLBF, 0); return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, &__orig_termios) ? ERR : OK); } /* * The following routines, savetty and resetty are completely useless and * are left in only as stubs. If people actually use them they will almost * certainly screw up the state of the world. */ static struct termios savedtty; int savetty() { return (tcgetattr(STDIN_FILENO, &savedtty) ? ERR : OK); } int resetty() { return (tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, &savedtty) ? ERR : OK); } vigor-0.016.orig/curses/toucholap.c0100644000076400007640000000577207103707250015750 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)toucholap.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * touchoverlap -- * Touch, on win2, the part that overlaps with win1. */ int touchoverlap(win1, win2) register WINDOW *win1, *win2; { register int y, endy, endx, starty, startx; #ifdef CURSES_DEBUG __CTRACE("touchoverlap: (%0.2o, %0.2o);\n", win1, win2); #endif starty = max(win1->begy, win2->begy); startx = max(win1->begx, win2->begx); endy = min(win1->maxy + win1->begy, win2->maxy + win2->begx); endx = min(win1->maxx + win1->begx, win2->maxx + win2->begx); #ifdef CURSES_DEBUG __CTRACE("touchoverlap: from (%d,%d) to (%d,%d)\n", starty, startx, endy, endx); __CTRACE("touchoverlap: win1 (%d,%d) to (%d,%d)\n", win1->begy, win1->begx, win1->begy + win1->maxy, win1->begx + win1->maxx); __CTRACE("touchoverlap: win2 (%d,%d) to (%d,%d)\n", win2->begy, win2->begx, win2->begy + win2->maxy, win2->begx + win2->maxx); #endif if (starty >= endy || startx >= endx) return (OK); starty -= win2->begy; startx -= win2->begx; endy -= win2->begy; endx -= win2->begx; for (--endx, y = starty; y < endy; y++) __touchline(win2, y, startx, endx, 0); return (OK); } vigor-0.016.orig/curses/touchwin.c0100644000076400007640000000671407103707250015607 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)touchwin.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * touchline -- * Touch a given line. */ int touchline(win, y, sx, ex) WINDOW *win; register int y, sx, ex; { return (__touchline(win, y, sx, ex, 1)); } /* * touchwin -- * Make it look like the whole window has been changed. */ int touchwin(win) register WINDOW *win; { register int y, maxy; #ifdef CURSES_DEBUG __CTRACE("touchwin: (%0.2o)\n", win); #endif maxy = win->maxy; for (y = 0; y < maxy; y++) __touchline(win, y, 0, win->maxx - 1, 1); return (OK); } int __touchwin(win) register WINDOW *win; { register int y, maxy; #ifdef CURSES_DEBUG __CTRACE("touchwin: (%0.2o)\n", win); #endif maxy = win->maxy; for (y = 0; y < maxy; y++) __touchline(win, y, 0, win->maxx - 1, 0); return (OK); } int __touchline(win, y, sx, ex, force) register WINDOW *win; register int y, sx, ex; int force; { #ifdef CURSES_DEBUG __CTRACE("touchline: (%0.2o, %d, %d, %d, %d)\n", win, y, sx, ex, force); __CTRACE("touchline: first = %d, last = %d\n", *win->lines[y]->firstchp, *win->lines[y]->lastchp); #endif if (force) win->lines[y]->flags |= __FORCEPAINT; sx += win->ch_off; ex += win->ch_off; if (!(win->lines[y]->flags & __ISDIRTY)) { win->lines[y]->flags |= __ISDIRTY; *win->lines[y]->firstchp = sx; *win->lines[y]->lastchp = ex; } else { if (*win->lines[y]->firstchp > sx) *win->lines[y]->firstchp = sx; if (*win->lines[y]->lastchp < ex) *win->lines[y]->lastchp = ex; } #ifdef CURSES_DEBUG __CTRACE("touchline: first = %d, last = %d\n", *win->lines[y]->firstchp, *win->lines[y]->lastchp); #endif return (OK); } vigor-0.016.orig/curses/tscroll.c0100644000076400007640000000737407103707250015434 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)tscroll.c 8.4 (Berkeley) 7/27/94"; #endif /* not lint */ #include "curses.h" #define MAXRETURNSIZE 64 /* * Routine to perform scrolling. Derived from tgoto.c in tercamp(3) * library. Cap is a string containing printf type escapes to allow * scrolling. The following escapes are defined for substituting n: * * %d as in printf * %2 like %2d * %3 like %3d * %. gives %c hacking special case characters * %+x like %c but adding x first * * The codes below affect the state but don't use up a value. * * %>xy if value > x add y * %i increments n * %% gives % * %B BCD (2 decimal digits encoded in one byte) * %D Delta Data (backwards bcd) * * all other characters are ``self-inserting''. */ char * __tscroll(cap, n1, n2) const char *cap; int n1, n2; { static char result[MAXRETURNSIZE]; int c, n; char *dp; if (cap == NULL) goto err; for (n = n1, dp = result; (c = *cap++) != '\0';) { if (c != '%') { *dp++ = c; continue; } switch (c = *cap++) { case 'n': n ^= 0140; continue; case 'd': if (n < 10) goto one; if (n < 100) goto two; /* FALLTHROUGH */ case '3': *dp++ = (n / 100) | '0'; n %= 100; /* FALLTHROUGH */ case '2': two: *dp++ = n / 10 | '0'; one: *dp++ = n % 10 | '0'; n = n2; continue; case '>': if (n > *cap++) n += *cap++; else cap++; continue; case '+': n += *cap++; /* FALLTHROUGH */ case '.': *dp++ = n; continue; case 'i': n++; continue; case '%': *dp++ = c; continue; case 'B': n = (n / 10 << 4) + n % 10; continue; case 'D': n = n - 2 * (n % 16); continue; /* * XXX * System V terminfo files have lots of extra gunk. * The only one we've seen in scrolling strings is * %pN, and it seems to work okay if we ignore it. */ case 'p': ++cap; continue; default: goto err; } } *dp = '\0'; return (result); err: return("curses: __tscroll failed"); } vigor-0.016.orig/curses/tstp.c0100644000076400007640000000711507103707250014735 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)tstp.c 8.3 (Berkeley) 5/4/94"; #endif /* not lint */ #include #include #include #include #include "curses.h" /* * stop_signal_handler -- * Handle stop signals. */ void __stop_signal_handler(signo) int signo; { struct termios save; sigset_t oset, set; /* Get the current terminal state (which the user may have changed). */ if (tcgetattr(STDIN_FILENO, &save)) return; /* * Block window change and timer signals. The latter is because * applications use timers to decide when to repaint the screen. */ (void)sigemptyset(&set); (void)sigaddset(&set, SIGALRM); (void)sigaddset(&set, SIGWINCH); (void)sigprocmask(SIG_BLOCK, &set, &oset); /* * End the window, which also resets the terminal state to the * original modes. */ endwin(); /* Unblock SIGTSTP. */ (void)sigemptyset(&set); (void)sigaddset(&set, SIGTSTP); (void)sigprocmask(SIG_UNBLOCK, &set, NULL); /* Stop ourselves. */ __restore_stophandler(); (void)kill(0, SIGTSTP); /* Time passes ... */ /* Reset the curses SIGTSTP signal handler. */ __set_stophandler(); /* save the new "default" terminal state */ (void)tcgetattr(STDIN_FILENO, &__orig_termios); /* Reset the terminal state to the mode just before we stopped. */ (void)tcsetattr(STDIN_FILENO, __tcaction ? TCSASOFT | TCSADRAIN : TCSADRAIN, &save); /* Restart the screen. */ __startwin(); /* Repaint the screen. */ wrefresh(curscr); /* Reset the signals. */ (void)sigprocmask(SIG_SETMASK, &oset, NULL); } static void (*otstpfn)() = SIG_DFL; /* * Set the TSTP handler. */ void __set_stophandler() { otstpfn = signal(SIGTSTP, __stop_signal_handler); } /* * Restore the TSTP handler. */ void __restore_stophandler() { (void)signal(SIGTSTP, otstpfn); } vigor-0.016.orig/curses/addch.c0100644000076400007640000000441107103707250015002 0ustar cjw44cjw44/* * Copyright (c) 1981, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef lint static char sccsid[] = "@(#)addch.c 8.2 (Berkeley) 5/4/94"; #endif /* not lint */ #include "curses.h" /* * waddch -- * Add the character to the current position in the given window. * */ int waddch(win, ch) WINDOW *win; int ch; { __LDATA buf; buf.ch = ch; buf.attr = 0; return (__waddch(win, &buf)); } int __waddch(win, dp) WINDOW *win; __LDATA *dp; { char buf[2]; buf[0] = dp->ch; return (__waddbytes(win, buf, 1, dp->attr & __STANDOUT)); } vigor-0.016.orig/build/0040755000076400007640000000000007103707344013375 5ustar cjw44cjw44vigor-0.016.orig/build/ExtUtils/0040755000076400007640000000000007103707250015152 5ustar cjw44cjw44vigor-0.016.orig/build/ExtUtils/Embed.pm0100644000076400007640000002735407103707250016534 0ustar cjw44cjw44# $Id: Embed.pm,v 1.17 1996/07/02 13:48:17 dougm Exp $ require 5.002; package ExtUtils::Embed; require Exporter; require FileHandle; use Config; use Getopt::Std; #Only when we need them #require ExtUtils::MakeMaker; #require ExtUtils::Liblist; use vars qw(@ISA @EXPORT $VERSION @Extensions $Verbose $lib_ext $opt_o $opt_s ); use strict; $VERSION = sprintf("%d.%02d", q$Revision: 1.17 $ =~ /(\d+)\.(\d+)/); #for the namespace change $Devel::embed::VERSION = "99.99"; sub Version { $VERSION; } @ISA = qw(Exporter); @EXPORT = qw(&xsinit &ldopts &ccopts &ccflags &ccdlflags &perl_inc &xsi_header &xsi_protos &xsi_body); #let's have Miniperl borrow from us instead #require ExtUtils::Miniperl; #*canon = \&ExtUtils::Miniperl::canon; $Verbose = 0; $lib_ext = $Config{lib_ext} || '.a'; sub xsinit { my($file, $std, $mods) = @_; my($fh,@mods,%seen); $file ||= "perlxsi.c"; if (@_) { @mods = @$mods if $mods; } else { getopts('o:s:'); $file = $opt_o if defined $opt_o; $std = $opt_s if defined $opt_s; @mods = @ARGV; } $std = 1 unless scalar @mods; if ($file eq "STDOUT") { $fh = \*STDOUT; } else { $fh = new FileHandle "> $file"; } push(@mods, static_ext()) if defined $std; @mods = grep(!$seen{$_}++, @mods); print $fh &xsi_header(); print $fh "EXTERN_C void xs_init _((void));\n\n"; print $fh &xsi_protos(@mods); print $fh "\nEXTERN_C void\nxs_init()\n{\n"; print $fh &xsi_body(@mods); print $fh "}\n"; } sub xsi_header { return < #include #ifdef __cplusplus } # ifndef EXTERN_C # define EXTERN_C extern "C" # endif #else # ifndef EXTERN_C # define EXTERN_C extern # endif #endif EOF } sub xsi_protos { my(@exts) = @_; my(@retval,%seen); foreach $_ (@exts){ my($pname) = canon('/', $_); my($mname, $cname); ($mname = $pname) =~ s!/!::!g; ($cname = $pname) =~ s!/!__!g; my($ccode) = "EXTERN_C void boot_${cname} _((CV* cv));\n"; next if $seen{$ccode}++; push(@retval, $ccode); } return join '', @retval; } sub xsi_body { my(@exts) = @_; my($pname,@retval,%seen); my($dl) = canon('/','DynaLoader'); push(@retval, "\tdXSUB_SYS;\n") if $] > 5.002; push(@retval, "\tchar *file = __FILE__;\n\n"); foreach $_ (@exts){ my($pname) = canon('/', $_); my($mname, $cname, $ccode); ($mname = $pname) =~ s!/!::!g; ($cname = $pname) =~ s!/!__!g; if ($pname eq $dl){ # Must NOT install 'DynaLoader::boot_DynaLoader' as 'bootstrap'! # boot_DynaLoader is called directly in DynaLoader.pm $ccode = "\t/* DynaLoader is a special case */\n\tnewXS(\"${mname}::boot_${cname}\", boot_${cname}, file);\n"; push(@retval, $ccode) unless $seen{$ccode}++; } else { $ccode = "\tnewXS(\"${mname}::bootstrap\", boot_${cname}, file);\n"; push(@retval, $ccode) unless $seen{$ccode}++; } } return join '', @retval; } sub static_ext { unless (scalar @Extensions) { @Extensions = sort split /\s+/, $Config{static_ext}; unshift @Extensions, qw(DynaLoader); } @Extensions; } sub ldopts { require ExtUtils::MakeMaker; require ExtUtils::Liblist; my($std,$mods,$link_args,$path) = @_; my(@mods,@link_args,@argv); my($dllib,$config_libs,@potential_libs,@path); local($") = ' ' unless $" eq ' '; my $MM = bless {} => 'MY'; if (scalar @_) { @link_args = @$link_args if $link_args; @mods = @$mods if $mods; } else { @argv = @ARGV; #hmm while($_ = shift @argv) { /^-std$/ && do { $std = 1; next; }; /^--$/ && do { @link_args = @argv; last; }; /^-I(.*)/ && do { $path = $1 || shift @argv; next; }; push(@mods, $_); } } $std = 1 unless scalar @link_args; @path = $path ? split(/:/, $path) : @INC; push(@potential_libs, @link_args) if scalar @link_args; push(@potential_libs, $Config{libs}) if defined $std; push(@mods, static_ext()) if $std; my($mod,@ns,$root,$sub,$extra,$archive,@archives); print STDERR "Searching (@path) for archives\n" if $Verbose; foreach $mod (@mods) { @ns = split('::', $mod); $sub = $ns[-1]; $root = $MM->catdir(@ns); print STDERR "searching for '$sub${lib_ext}'\n" if $Verbose; foreach (@path) { next unless -e ($archive = $MM->catdir($_,"auto",$root,"$sub$lib_ext")); push @archives, $archive; if(-e ($extra = $MM->catdir($_,"auto",$root,"extralibs.ld"))) { local(*FH); if(open(FH, $extra)) { my($libs) = ; chomp $libs; push @potential_libs, split /\s+/, $libs; } else { warn "Couldn't open '$extra'"; } } last; } } #print STDERR "\@potential_libs = @potential_libs\n"; my($extralibs, $bsloadlibs, $ldloadlibs, $ld_run_path) = $MM->ext(join ' ', $MM->catdir("-L$Config{archlib}", "CORE"), " -lperl", @potential_libs); my $ld_or_bs = $bsloadlibs || $ldloadlibs; print STDERR "bs: $bsloadlibs ** ld: $ldloadlibs" if $Verbose; my $linkage = "$Config{ldflags} @archives $ld_or_bs"; print STDERR "ldopts: '$linkage'\n" if $Verbose; return $linkage if scalar @_; print "$linkage\n"; } sub ccflags { print " $Config{ccflags} "; } sub ccdlflags { print " $Config{ccdlflags} "; } sub perl_inc { print " -I$Config{archlib}/CORE "; } sub ccopts { ccflags; ccdlflags; perl_inc; } sub canon { my($as, @ext) = @_; foreach(@ext) { # might be X::Y or lib/auto/X/Y/Y.a next if s!::!/!g; s:^(lib|ext)/(auto/)?::; s:/\w+\.\w+$::; } grep(s:/:$as:, @ext) if ($as ne '/'); @ext; } __END__ =head1 NAME ExtUtils::Embed - Utilities for embedding Perl in C/C++ applications =head1 SYNOPSIS perl -MExtUtils::Embed -e xsinit perl -MExtUtils::Embed -e ldopts =head1 DESCRIPTION ExtUtils::Embed provides utility functions for embedding a Perl interpreter and extensions in your C/C++ applications. Typically, an application B will invoke ExtUtils::Embed functions while building your application. =head1 @EXPORT ExtUtils::Embed exports the following functions: L, L, L, L, L, L, L, L, L =head1 FUNCTIONS =item xsinit() Generate C/C++ code for the XS intializer function. When invoked as C<`perl -MExtUtils::Embed -e xsinit --`> the following options are recognized: B<-o> (Defaults to B) B<-o STDOUT> will print to STDOUT. B<-std> (Write code for extensions that are linked with the current Perl.) Any additional arguments are expected to be names of modules to generate code for. When invoked with parameters the following are accepted and optional: C Where, B<$filename> is equivalent to the B<-o> option. B<$std> is boolean, equivalent to the B<-std> option. B<[@modules]> is an array ref, same as additional arguments mentioned above. =item Examples perl -MExtUtils::Embed -e xsinit -- -o xsinit.c Socket This will generate code with an B function that glues the perl B function to the C B function and writes it to a file named "xsinit.c". Note that B is a special case where it must call B directly. perl -MExtUtils::Embed -e xsinit This will generate code for linking with B and each static extension found in B<$Config{static_ext}>. The code is written to the default file name B. perl -MExtUtils::Embed -e xsinit -- -o xsinit.c -std DBI DBD::Oracle Here, code is written for all the currently linked extensions along with code for B and B. If you have a working B then there is rarely any need to statically link in any other extensions. =item ldopts() Output arguments for linking the Perl library and extensions to your application. When invoked as C<`perl -MExtUtils::Embed -e ldopts --`> the following options are recognized: B<-std> Output arguments for linking the Perl library and any extensions linked with the current Perl. B<-I> Search path for ModuleName.a archives. Default path is B<@INC>. Library archives are expected to be found as B For example, when looking for B relative to a search path, we should find B When looking for B relative to a search path, we should find B Keep in mind, you can always supply B as an additional linker argument. B<--> Additional linker arguments to be considered. Any additional arguments found before the B<--> token are expected to be names of modules to generate code for. When invoked with parameters the following are accepted and optional: C Where, B<$std> is boolean, equivalent to the B<-std> option. B<[@modules]> is equivalent to additional arguments found before the B<--> token. B<[@link_args]> is equivalent to arguments found after the B<--> token. B<$path> is equivalent to the B<-I> option. In addition, when ldopts is called with parameters, it will return the argument string rather than print it to STDOUT. =item Examples perl -MExtUtils::Embed -e ldopts This will print arguments for linking with B, B and extensions found in B<$Config{static_ext}>. This includes libraries found in B<$Config{libs}> and the first ModuleName.a library for each extension that is found by searching B<@INC> or the path specifed by the B<-I> option. In addition, when ModuleName.a is found, additional linker arguments are picked up from the B file in the same directory. perl -MExtUtils::Embed -e ldopts -- -std Socket This will do the same as the above example, along with printing additional arguments for linking with the B extension. perl -MExtUtils::Embed -e ldopts -- DynaLoader This will print arguments for linking with just the B extension and B. perl -MExtUtils::Embed -e ldopts -- -std Msql -- -L/usr/msql/lib -lmsql Any arguments after the second '--' token are additional linker arguments that will be examined for potential conflict. If there is no conflict, the additional arguments will be part of the output. =item perl_inc() For including perl header files this function simply prints: -I $Config{archlib}/CORE So, rather than having to say: perl -MConfig -e 'print "-I $Config{archlib}/CORE"' Just say: perl -MExtUtils::Embed -e perl_inc =item ccflags(), ccdlflags() These functions simply print $Config{ccflags} and $Config{ccdlflags} =item ccopts() This function combines perl_inc(), ccflags() and ccdlflags() into one. =item xsi_header() This function simply returns a string defining the same B macro as B along with #including B and B. =item xsi_protos(@modules) This function returns a string of B prototypes for each @modules. =item xsi_body(@modules) This function returns a string of calls to B that glue the module B function to B for each @modules. B uses the xsi_* functions to generate most of it's code. =head1 EXAMPLES For examples on how to use B for building C/C++ applications with embedded perl, see the eg/ directory and the I man page. =head1 SEE ALSO the I man page =head1 AUTHOR Doug MacEachern Based on ideas from Tim Bunce and B by Andreas Koenig and Tim Bunce. =cut vigor-0.016.orig/build/acconfig.h0100644000076400007640000000427407103707250015317 0ustar cjw44cjw44/* @(#)acconfig.h 8.18 (Berkeley) 7/2/96 */ /* Define to `int' if doesn't define. */ #undef ssize_t /* Define if you want a debugging version. */ #undef DEBUG /* Define if you have a System V-style (broken) gettimeofday. */ #undef HAVE_BROKEN_GETTIMEOFDAY /* Define if you have a Ultrix-style (broken) vdisable. */ #undef HAVE_BROKEN_VDISABLE /* Define if you have a BSD version of curses. */ #undef HAVE_BSD_CURSES /* Define if you have the curses(3) addnstr function. */ #undef HAVE_CURSES_ADDNSTR /* Define if you have the curses(3) beep function. */ #undef HAVE_CURSES_BEEP /* Define if you have the curses(3) flash function. */ #undef HAVE_CURSES_FLASH /* Define if you have the curses(3) idlok function. */ #undef HAVE_CURSES_IDLOK /* Define if you have the curses(3) keypad function. */ #undef HAVE_CURSES_KEYPAD /* Define if you have the curses(3) newterm function. */ #undef HAVE_CURSES_NEWTERM /* Define if you have the curses(3) setupterm function. */ #undef HAVE_CURSES_SETUPTERM /* Define if you have the curses(3) tigetstr/tigetnum functions. */ #undef HAVE_CURSES_TIGETSTR /* Define if you have the DB __hash_open call in the C library. */ #undef HAVE_DB_HASH_OPEN /* Define if you have the chsize(2) system call. */ #undef HAVE_FTRUNCATE_CHSIZE /* Define if you have the ftruncate(2) system call. */ #undef HAVE_FTRUNCATE_FTRUNCATE /* Define if you have fcntl(2) style locking. */ #undef HAVE_LOCK_FCNTL /* Define if you have flock(2) style locking. */ #undef HAVE_LOCK_FLOCK /* Define if you want to compile in the Perl interpreter. */ #undef HAVE_PERL_INTERP /* Define if your Perl is at least 5.003_01. */ #undef HAVE_PERL_5_003_01 /* Define if you have the Berkeley style revoke(2) system call. */ #undef HAVE_REVOKE /* Define if you have the Berkeley style strsep(3) function. */ #undef HAVE_STRSEP /* Define if you have */ #undef HAVE_SYS_MMAN_H /* Define if you have */ #undef HAVE_SYS_SELECT_H /* Define if you have the System V style pty calls. */ #undef HAVE_SYS5_PTY /* Define if you want to compile in the Tcl interpreter. */ #undef HAVE_TCL_INTERP /* Define if your sprintf returns a pointer, not a length. */ #undef SPRINTF_RET_CHARPNT vigor-0.016.orig/build/README0100644000076400007640000003351207103707250014252 0ustar cjw44cjw44************************************************************************* THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is Vigor, a quick hack made on top of nvi. Do not expect Vigor to work right. Do not expect Vigor to work like nvi. Above all, DO NOT BLAME THE AUTHORS OF NVI FOR VIGOR'S PROBLEMS! Before proceeding, please read ../README.vigor for information about Vigor, including background, requirements, total lack of warranty, and the guy who actually committed this hack. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS ************************************************************************* # @(#)README 8.26 (Berkeley) 10/19/96 Nvi uses the GNU autoconf program for configuration and compilation. You should enter: configure make and nvi will configure the system and build one or two binaries: nvi and tknvi. You can use any path to the configure script, e.g., to build for an x86 architecture, I suggest that you do: mkdir build.x86 cd build.x86 ../build/configure make There are options that you can specify to the configure command. See the next section for a description of these options. If you want to rebuild or reconfigure nvi, for example, because you change your mind as to the curses library that you want to use, create a new directory and reconfigure it using "configure" and whatever options you choose, don't try to selectively edit the files. By default, nvi is installed as "vi", with hard links to "ex" and "view". To install them using different names, use the configure program options. For example, to install them as "nvi", "nex" and "nview", use: configure --program-prefix=n See the section below on installation for details. Note, if you're building nvi on a LynxOS system, you should read the README.LynxOS file in this directory for additional build instructions that are specific to that operating system. If you have trouble with this procedure, send email to the addresses listed in ../README. In that email, please provide a complete script of the output for all of the above commands that you entered. =-=-=-=-=-=-= NVI'S OPTIONS TO THE CONFIGURE PROGRAM =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= There are many options that you can enter to the configuration program. To see a complete list of the options, enter "configure --help". Only a few of them are nvi specific. These options are as follows: --disable-curses DON'T use the nvi-provided curses routines. --disable-db DON'T use the nvi-provided DB routines. --disable-re DON'T use the nvi-provided RE routines. --enable-debug Build a debugging version. --enable-perlinterp Include a Perl interpreter in vi. --enable-tclinterp Include a Tk/Tcl interpreter in vi. --enable-tknvi Build a Tk/Tcl front-end for vi. disable-curses: By default, nvi loads its own implementation of the curses routines (which are a stripped-down version of the 4.4BSD curses library). If you have your own curses library implementation and you want to use it instead, enter: --disable-curses as an argument to configure, and the curses routines will be taken from whatever libraries you load. Note: System V based curses implementations are usually broken. See the last section of this README for further information about nvi and the curses library. disable-db: By default, nvi loads its own versions of the Berkeley DB routines (which are a stripped-down version of DB 1.85). If you have your own version of the Berkeley DB routines and you want to use them instead, enter: --disable-db as an argument to configure, and the DB routines will be taken from whatever libraries you load. Make sure that the DB routines you use are at least version 1.85 or later. disable-re: By default, nvi loads its own versions of the POSIX 1003.2 Regular Expression routines (which are Henry Spencer's implementation). If your C library contains an implementation of the POSIX 1003.2 RE routines (note, this is NOT the same as the historic UNIX RE routines), and you want to use them instead, enter: --disable-re as an argument to configure, and the RE routines will be taken from whatever libraries you load. Please ensure that your RE routines implement Henry Spencer's extensions for doing vi-style "word" searches. enable-debug: If you want to build nvi with no optimization (i.e. without -O as a compiler flag), with -g as a compiler flag, and with DEBUG defined during compilation, enter: --enable-debug as an argument to configure. enable-perlinterp: If you have the Perl 5 libraries and you want to compile in the Perl interpreter, enter: --enable-perlinterp as an argument to configure. (Note: this is NOT possible with Perl 4, or even with Perl 5 versions earlier than 5.002.) enable-tclinterp: If you have the Tk/Tcl libraries and you want to compile in the Tcl/Tk interpreter, enter: --enable-tclinterp as an argument to configure. If your Tk/Tcl include files and libraries aren't in the standard library and include locations, see the next section of this README file for more information. enable-tknvi: If you have the Tk/Tcl libraries and you want to build the Tcl/Tk nvi front-end, enter: --enable-tknvi as an argument to configure. If your Tk/Tcl include files and libraries aren't in the standard library and include locations, see the next section of this README file for more information. =-=-=-=-=-=-= ADDING OR CHANGING COMPILERS, OR COMPILE OR LOAD LINE FLAGS =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= If you want to use a specific compiler, specify the CC environment variable before running configure. For example: env CC=gcc configure Using anything other than the native compiler will almost certainly mean that you'll want to check the compile and load line flags, too. If you want to specify additional load line flags, specify the ADDLDFLAGS environment variable before running configure. For example: env ADDLDFLAGS="-Q" configure would specify the -Q flag in the load line when the nvi programs are loaded. If you don't want configure to use the default load line flags for the system, specify the LDFLAGS environment variable before running configure. For example: env LDFLAGS="-32" configure will cause configure to set the load line flags to "-32", and not set them based on the current system. If you want to specify additional compile line flags, specify the ADDCPPFLAGS environment variable before running configure. For example: env ADDCPPFLAGS="-I../foo" configure would cause the compiler to be passed the -I../foo flag when compiling test programs during configuration as well as when building nvi object files. If you don't want configure to use the default compile line flags for the system, specify the CPPFLAGS environment variable before running configure. For example: env CPPFLAGS="-I.." configure will cause configure to use "-I.." as the compile line flags instead of the default values. =-=-=-=-=-=-= ADDING LIBRARIES AND INCLUDE FILES =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= If the Tk/Tcl or any other include files or libraries are in non-standard places on your system, you will need to specify the directory path where they can be found. If you want to specify additional library paths, set the ADDLIBS environment variable before running configure. For example: env ADDLIBS="-L/a/b -L/e/f -ldb" configure would specify two additional directories to search for libraries, /a/b and /e/f, and one additional library to load, "db". If you want to specify additional include paths, specify the ADDCPPFLAGS environment variable before running configure. For example: env ADDCPPFLAGS="-I/usr/local/include" LIBS="-ldb" configure would search /usr/local/include for include files, as well as load the db library as described above. As a final example, let's say that you've downloaded ncurses from the net and you've built it in a directory named ncurses which is at the same level in the filesystem hierarchy as nvi. You would enter something like: env ADDCPPFLAGS="-I../../ncurses/include" \ ADDLIBS="-L../../ncurses/libraries" configure to cause nvi to look for the curses include files and the curses library in the ncurses environment. Notes: Make sure that you prepend -L to any library directory names, and that you prepend -I to any include file directory names! Also, make sure that you quote the paths as shown above, i.e. with single or double quotes around the values you're specifying for ADDCPPFLAGS and ADDLIBS. =-=-=-=-=-= You should NOT need to add any libraries or include files to load the Perl5 interpreter. The configure script will obtain that information directly from the Perl5 program. This means that the configure script must be able to find perl in its path. It looks for "perl5" first, and then "perl". If you're building a Perl interpreter and neither is found, it's a fatal error. =-=-=-=-=-= You do not need to specify additional libraries to load Tk/Tcl, Perl or curses, as the nvi configuration script adds the appropriate libraries to the load line whenever you specify --enable-tknvi or other Perl or Tk/Tcl related option, or build the Tk/Tcl or curses version of nvi. The library names that are automatically loaded are as follows: for Perl: -lperl for Tk/Tcl: -ltk -ltcl -lm for curses: -lcurses In addition, the configure script loads: ... the X libraries when loading the Tk/Tcl libraries, if they exist. ... the -ltermcap or -ltermlib libraries when loading any curses library, if they exist. =-=-=-=-=-= The env command is available on most systems, and simply sets one or more environment variables before running a command. If the env command is not available to you, you can set the environment variables in your shell before running configure. For example, in sh or ksh, you could do: ADDLIBS="-L/a/b -L/e/f -ldb" configure and in csh or tcsh, you could do: setenv ADDLIBS "-L/a/b -L/e/f -ldb" configure See your shell manual page for further information. =-=-=-=-=-=-= INSTALLING NVI =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Nvi installs the following files into the following locations, with the following default values: Variables: Default value: prefix /usr/local exec_prefix $(prefix) bindir $(prefix)/bin datadir $(prefix)/share mandir $(prefix)/man File(s): Default location ---------------------------------------- vi $(bindir)/vi vi.1 $(mandir)/man1/vi.1 vi.0 $(mandir)/cat1/vi.0 Perl scripts $(datadir)/vi/perl/ Tcl scripts $(datadir)/vi/tcl/ Message Catalogs $(datadir)/vi/catalog/ Notes: There are two hard links to the vi program, named ex and view. Similarly, there are two hard links to the unformatted vi manual page, named ex.1 and view.1, and two hard links to the formatted manual page, named ex.0 and view.0. These links are created when the program and man pages are installed. If you want to install vi, ex, view and the man pages as nvi, nex, nview, use the configure option --program-prefix=n. Other, more complex transformations are possible -- use configure --help to see more options. To move the entire installation tree somewhere besides /usr/local, change the value of both "exec_prefix" and "prefix". To move the binaries to a different place, change the value of "bindir". Similarly, to put the datafiles (the message catalogs, Perl and Tcl scripts) or the man pages in a different place, change the value of "datadir" or "mandir". These values can be changed as part of configuration: configure --exec_prefix=/usr/contrib --prefix=/usr/share or when doing the install itself: make exec_prefix=/usr/contrib prefix=/usr/contrib install The datafile directory (e.g., /usr/local/share/vi by default) is completely removed and then recreated as part of the installation process. =-=-=-=-=-=-= NVI AND THE CURSES LIBRARY =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= The major portability problem for nvi is selecting a curses library. Unfortunately, it is common to find broken versions of curses -- the original System V curses was broken, resulting in all vendors whose implementations are derived from System V having broken implementations in turn. For this reason, BY DEFAULT, nvi uses the stripped-down curses library that's included in its distribution. Of course, it would be preferable to use the vendor's curses library, or one of the newer implementations of curses, e.g., ncurses. To use the vendor's curses library, specify the: --disable-curses argument to the configure command. If you use the vendor's or other curses library, and you see any of the following symptoms: + Core dumps in curses routines. + Missing routines when compiling. + Repainting the wrong characters on the screen. + Displaying inverse video in the wrong places. + Failure to reset your terminal to the correct modes on exit. you have a broken curses implementation, and you should reconfigure nvi to use another curses library or the curses library provided with nvi. There are two alternative sources for curses libraries: #1: Compile the 4BSD curses library from any of the recent BSD releases: FreeBSD, NetBSD or 4.4BSD-Lite release 2. These libraries should be able to support nvi. #2: Retrieve and build the ncurses library. This library is not recommended unreservedly, at least for now, for two reasons. First, it can't be built on any system where the compiler doesn't support function prototypes. Second, it currently has a few bugs in its support for nvi. It mostly works, but it's still not quite right. One final note. If you see the following symptoms: + Line-by-line screen repainting instead of scrolling. it usually means that your termcap or terminfo information is insufficient for the terminal. vigor-0.016.orig/build/configure.in0100644000076400007640000005336507103707250015713 0ustar cjw44cjw44dnl @(#)configure.in 8.134 (Berkeley) 10/15/96 dnl Process this file with autoconf to produce a configure script. AC_INIT(../common/main.c) AC_CONFIG_HEADER(config.h) dnl Configure setup. AC_PROG_INSTALL() AC_CANONICAL_HOST AC_ARG_PROGRAM() dnl If the user wants a debugging environment, set OPTFLAG now. (Some dnl compilers won't mix optimizing and debug flags.) AC_MSG_CHECKING(if --enable-debug option specified) AC_ARG_ENABLE(debug, [ --enable-debug Build a debugging version.], [vi_cv_debug="yes"], [vi_cv_debug="no"]) if test "$vi_cv_debug" = yes; then AC_DEFINE(DEBUG) OPTFLAG=${OPTFLAG-"-g"} no_op_OPTFLAG=${no_op_OPTFLAG-"-g"} fi AC_MSG_RESULT($vi_cv_debug) dnl This is where we handle stuff that autoconf can't handle. dnl XXX dnl Don't override anything if it's already set from the environment. dnl Compiler, preprocessor and load flags. dnl AUX: -ZP disables _BSD_SOURCE et al, but enables POSIX at link time. dnl LynxOS: We check for gcc 2.x or better, the gcc 1 that was shipped with dnl LynxOS historically wasn't good enough. AC_SUBST(CPPFLAGS) case "$host_os" in aix3.2.5) OPTFLAG=${OPTFLAG-"-O"};; aix4.1*) CFLAGS=${CFLAGS-"-qstrict"} OPTFLAG=${OPTFLAG-"-O3"};; aux*) CPPFLAGS=${CPPFLAGS-"-ZP -D_BSD_SOURCE -D_SYSV_SOURCE -D_AUX_SOURCE"} LDFLAGS=${LDFLAGS-"-ZP"} OPTFLAG=${OPTFLAG-"-O"};; bsd4.4) OPTFLAG=${OPTFLAG-"-O2"};; bsdi*) CC=${CC-"shlicc"} OPTFLAG=${OPTFLAG-"-O2"};; irix6*) OPTFLAG=${OPTFLAG-"-O2"};; irix*) OPTFLAG=${OPTFLAG-"-O2"};; lynxos*) AC_PROG_CC() AC_MSG_CHECKING([for GNU C (gcc) version 2.x]) ac_cv_gcc_vers=`${CC-cc} -v 2>&1 | \ grep "gcc version " | sed 's/.*version //'` ac_cv_gcc_major=`echo "$ac_cv_gcc_vers" | sed 's/\..*//'` if test "$ac_cv_gcc_major" = "2" ; then AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) echo "Fatal error: Nvi requires gcc 2.x to build on LynxOS." echo "See build/README.LynxOS for more information." exit 1 fi;; nextstep3) CPPFLAGS=${CPPFLAGS-"-w -pipe -posix"} LDFLAGS=${LDFLAGS-"-posix"} OPTFLAG=${OPTFLAG-"-O9"};; osf*) CFLAGS=${CFLAGS-"-Olimit 1000"};; solaris*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; sunos*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; esac dnl The default compiler is cc. AC_SUBST(CC) CC=${CC-cc} dnl The default OPTFLAG is -O AC_SUBST(OPTFLAG) OPTFLAG=${OPTFLAG-"-O"} dnl The SunOS/Solaris compiler can't optimize vi/v_txt.c; the symptom is dnl that the command 35i== turns into an infinite loop. AC_SUBST(no_op_OPTFLAG) no_op_OPTFLAG=${no_op_OPTFLAG-"$OPTFLAG"} dnl Libraries. case "$host_os" in bsdi2.1) LIBS=${LIBS-"-lipc"};; dgux*) LIBS=${LIBS-"-ldgc"};; irix6*) LIBS=${LIBS-"-lbsd"};; irix*) LIBS=${LIBS-"-lc_s -lbsd"};; isc*) LIBS=${LIBS-"-lcposix -linet"};; netbsd1*) LIBS=${LIBS-"-lcrypt"};; ptx*) LIBS=${LIBS-"-lseq -linet -lsocket"};; sco3.2*) LIBS=${LIBS-"-lsocket"};; sinix*) LIBS=${LIBS-"-lelf -lc"};; solaris*) LIBS=${LIBS-"-lsocket -lnsl -ldl"} RLIBS=yes;; wgs*) LIBS=${LIBS-"-lnsl"};; esac dnl A/UX has a broken getopt(3), strpbrk(3). case "$host_os" in aux*) LIBOBJS="getopt.o strpbrk.o $LIBOBJS";; esac dnl Ultrix has a broken POSIX.1 VDISABLE value. case "$host_os" in ultrix*) AC_DEFINE(HAVE_BROKEN_VDISABLE);; esac dnl The user may have additional CPP information. CPPFLAGS="$ADDCPPFLAGS $CPPFLAGS" dnl The user may have additional load line information. LDFLAGS="$ADDLDFLAGS $LDFLAGS" dnl The user may have additional library information. LIBS="$ADDLIBS $LIBS" dnl Check to see if it's going to work. AM_SANITY_CHECK_CC dnl Checks for programs. PATH="$PATH:/usr/bin:/usr/sbin:/sbin:/etc:/usr/etc:/usr/lib:/usr/ucblib:" dnl Check for the shell path. AC_PATH_PROG(vi_cv_path_shell, sh, no) if test "$vi_cv_path_shell" = no; then echo "Fatal error: the shell utility not found." exit 1 fi dnl Check for the sendmail path. AC_PATH_PROG(vi_cv_path_sendmail, sendmail, no) if test "$vi_cv_path_sendmail" = no; then echo "WARNING: The sendmail utility was not found!" echo "WARNING: Users will not be told of saved files." fi dnl Check for the perl5/perl path. AC_SUBST(vi_cv_path_perl) AC_PATH_PROGS(vi_cv_path_perl, perl5 perl, no) dnl Check for the "preserve" path. dnl Historically, nvi has used /var/tmp/vi.recover. The Linux filesystem dnl standard (FSSTND) uses /var/preserve; we add the vi.recover directory dnl beneath it so that we don't have name collisions with other editors. dnl Other systems have /var/preserve as well, so we test first for an already dnl existing name, and then use the first one that's writeable. AC_SUBST(vi_cv_path_preserve) AC_MSG_CHECKING(for preserve directory) AC_CACHE_VAL(vi_cv_path_preserve, [dnl dirlist="/var/preserve /var/tmp /usr/tmp" vi_cv_path_preserve=no for i in $dirlist; do if test -d $i/vi.recover; then vi_cv_path_preserve=$i/vi.recover break; fi done if test "$vi_cv_path_preserve" = no; then for i in $dirlist; do if test -d $i -a -w $i; then vi_cv_path_preserve=$i/vi.recover break; fi done fi]) if test "$vi_cv_path_preserve" = no; then echo "Fatal error: no writeable preserve directory found." exit 1 fi AC_MSG_RESULT($vi_cv_path_preserve) dnl Check for programs used for installation AC_PATH_PROG(vi_cv_path_chmod, chmod, missing_chmod) AC_PATH_PROG(vi_cv_path_cp, cp, missing_cp) AC_PATH_PROG(vi_cv_path_ln, ln, missing_ln) AC_PATH_PROG(vi_cv_path_mkdir, mkdir, missing_mkdir) AC_PATH_PROG(vi_cv_path_rm, rm, missing_rm) AC_PATH_PROG(vi_cv_path_strip, strip, missing_strip) dnl Checks for libraries. dnl Find the X libraries and includes. AC_PATH_X if test "$no_x" = yes; then AC_MSG_ERROR(X is required for Vigor, but could not be located.) fi AC_SUBST(XINCS) if test "X$x_libraries" != "X"; then if test "X$RLIBS" = "Xyes"; then XLIBS="-R$x_libraries -L$x_libraries $XLIBS" else XLIBS="-L$x_libraries $XLIBS" fi fi XLIBS="$XLIBS -lX11" if test "X$x_includes" != "X"; then XINCS="-I$x_includes" fi dnl If the user wants a Perl interpreter in nvi, load it. AC_SUBST(shrpenv) AC_SUBST(vi_cv_perllib) AC_MSG_CHECKING(if --enable-perlinterp option specified) AC_ARG_ENABLE(perlinterp, [ --enable-perlinterp Include a Perl interpreter in vi.], [vi_cv_perlinterp="yes"], [vi_cv_perlinterp="no"]) AC_MSG_RESULT($vi_cv_perlinterp) if test "$vi_cv_perlinterp" = "yes"; then if test "$vi_cv_path_perl" = no; then echo "Fatal error: no perl5 utility found." exit 1 fi $vi_cv_path_perl -e 'require 5.002' || { echo "Fatal error: perl5 must be version 5.002 or later." exit 1 } $vi_cv_path_perl -e 'close(STDERR);require 5.003_01' && AC_DEFINE(HAVE_PERL_5_003_01) eval `$vi_cv_path_perl -V:shrpenv` if test "X$shrpenv" = "XUNKNOWN"; then # pre 5.003_04 shrpenv="" fi vi_cv_perllib=`$vi_cv_path_perl -MConfig -e 'print $Config{privlib}'` perlcppflags=`$vi_cv_path_perl -Mlib=$srcdir -MExtUtils::Embed \ -e 'ccflags;perl_inc'` if test "X$perlcppflags" != "X"; then CPPFLAGS="$perlcppflags $CPPFLAGS" fi perllibs=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ -e 'ldopts'` if test "X$perllibs" != "X"; then LIBS="$perllibs $LIBS" fi perlldflags=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ -e 'ccdlflags'` if test "X$perlldflags" != "X"; then LDFLAGS="$perlldflags $LDFLAGS" fi LIBOBJS="perl.o perlsfio.o $LIBOBJS" AC_DEFINE(HAVE_PERL_INTERP) fi dnl Make sure we can find a Tcl/Tk interpreter. LIBOBJS="tcl.o $LIBOBJS" dnl GNU/Linux Tcl requires -ldl AC_CHECK_LIB(dl,dlopen) LIBS="$LIBS -lm" AC_SEARCH_LIBS(Tcl_Init,tcl tcl82 tcl8.2 tcl80 tcl8.0,,dnl AC_MSG_ERROR([Tcl is required for Vigor but could not be located.])) AC_SEARCH_LIBS(Tk_Init,tk tk82 tk8.2 tk80 tk8.0,,dnl AC_MSG_ERROR([Tk is required for Vigor but could not be located.]),$XLIBS) LIBS="$LIBS $XLIBS -lm" AC_DEFINE(HAVE_TCL_INTERP) dnl Both Tcl/Tk and Perl interpreters need the vi api code. LIBOBJS="api.o $LIBOBJS" dnl Check for the termcap/termlib library. Compile in nvi's curses routines dnl only if the user specifies to. These two checks must occur in the dnl current order, and -lcurses must be loaded before -ltermcap/-ltermlib. AC_CHECK_LIB(termlib, tgetent, [vi_cv_termlib=-ltermlib], [vi_cv_termlib=no]) if test "$vi_cv_termlib" = no; then AC_CHECK_LIB(termcap, tgetent, [vi_cv_termlib=-ltermcap], [vi_cv_termlib=no]) fi if test "$vi_cv_termlib" != no; then LIBS="$vi_cv_termlib $LIBS" fi AC_SUBST(cobjs) AC_MSG_CHECKING(if --enable-curses option specified) AC_ARG_ENABLE(curses, [ --enable-curses Use the nvi-provided curses routines.], [vi_cv_curses="bundled curses"], [vi_cv_curses="other curses"]) AC_MSG_RESULT($vi_cv_curses) case "$vi_cv_curses" in "bundled curses") CPPFLAGS="-I\$(srcdir)/curses $CPPFLAGS" cobjs="\$(COBJS)";; "other curses") LIBS="-lcurses $LIBS";; esac dnl Checks for header files. AC_MSG_CHECKING(for sys/mman.h) AC_CACHE_VAL(vi_cv_include_sys_mman, [dnl AC_TRY_CPP([#include ], [vi_cv_include_sys_mman=yes], [vi_cv_include_sys_mman=no])]) if test "$vi_cv_include_sys_mman" = yes; then AC_DEFINE(HAVE_SYS_MMAN_H) fi AC_MSG_RESULT($vi_cv_include_sys_mman) AC_MSG_CHECKING(for sys/select.h) AC_CACHE_VAL(vi_cv_include_sys_select, [dnl AC_TRY_CPP([#include ], [vi_cv_include_sys_select=yes], [vi_cv_include_sys_select=no])]) if test "$vi_cv_include_sys_select" = yes; then AC_DEFINE(HAVE_SYS_SELECT_H) fi AC_MSG_RESULT($vi_cv_include_sys_select) dnl Checks for typedefs, structures, and compiler characteristics. AC_CHECK_TYPE(ssize_t, int) AC_C_BIGENDIAN AC_C_CONST AC_STRUCT_ST_BLKSIZE AC_TYPE_MODE_T AC_TYPE_OFF_T AC_TYPE_PID_T AC_TYPE_SIZE_T AC_STRUCT_TM dnl Checks for library functions. AC_CHECK_FUNCS(bsearch gethostname getopt memchr memcpy memmove memset) AC_REPLACE_FUNCS(bsearch gethostname getopt memchr memcpy memmove memset) AC_CHECK_FUNCS(mkstemp mmap snprintf strdup strerror strpbrk strtol) AC_REPLACE_FUNCS(mkstemp mmap snprintf strdup strerror strpbrk strtol) AC_CHECK_FUNCS(strtoul vsnprintf) AC_REPLACE_FUNCS(strtoul vsnprintf) AC_CHECK_FUNCS(select) AC_CHECK_FUNCS(setenv, [need_env=no], [need_env=yes]) AC_CHECK_FUNCS(strsep, [need_strsep=no], [need_strsep=yes]) AC_CHECK_FUNCS(unsetenv,, [need_env=yes]) AC_FUNC_MMAP AC_FUNC_VFORK dnl If we needed setenv or unsetenv, add in the clib/env.c replacement file. if test "$need_env" = yes; then LIBOBJS="env.o $LIBOBJS" fi dnl If we need strsep, add it and define it so we get a prototype. if test "$need_strsep" = yes; then LIBOBJS="strsep.o $LIBOBJS" fi dnl Check for fcntl/flock dnl Use flock preferentially, since it has cleaner semantics and won't dnl hang up the editor. dnl XXX dnl Ultrix has a broken fcntl, but a working flock. dnl IRIX and DGUX have a broken flock, but working fcntl. AC_MSG_CHECKING(for fcntl/flock) AC_CACHE_VAL(vi_cv_lock, [dnl vi_cv_lock=none case "$host_os" in dgux*);; irix*);; *) AC_TRY_LINK([#include ], [flock(0, 0);], [vi_cv_lock=flock]);; esac if test "$vi_cv_lock" = none; then AC_TRY_LINK([#include ], [fcntl(0, F_SETLK, 0);], [vi_cv_lock=fcntl]) fi]) if test "$vi_cv_lock" = flock; then AC_DEFINE(HAVE_LOCK_FLOCK) fi if test "$vi_cv_lock" = fcntl; then AC_DEFINE(HAVE_LOCK_FCNTL) fi AC_MSG_RESULT($vi_cv_lock) dnl Check for ftruncate/chsize AC_MSG_CHECKING(for ftruncate/chsize) AC_CACHE_VAL(vi_cv_ftruncate, [dnl AC_TRY_LINK([#include ], [ftruncate(0, 0);], [vi_cv_ftruncate=ftruncate], AC_TRY_LINK([#include ], [chsize(0, 0);], [vi_cv_ftruncate=chsize], [vi_cv_ftruncate=no]))]) if test "$vi_cv_ftruncate" = ftruncate; then AC_DEFINE(HAVE_FTRUNCATE_FTRUNCATE) fi if test "$vi_cv_ftruncate" = chsize; then AC_DEFINE(HAVE_FTRUNCATE_CHSIZE) fi if test "$vi_cv_ftruncate" = no; then echo echo "Fatal error: no file truncation system call." exit 1 fi AC_MSG_RESULT($vi_cv_ftruncate) dnl Check for the tigetstr/tigetnum functions. AC_MSG_CHECKING(for tigetstr/tigetnum) AC_CACHE_VAL(vi_cv_have_curses_tigetstr, [dnl AC_TRY_LINK([#include ], [tigetstr(0);], [vi_cv_have_curses_tigetstr=yes], [vi_cv_have_curses_tigetstr=no])]) if test "$vi_cv_have_curses_tigetstr" = yes; then AC_DEFINE(HAVE_CURSES_TIGETSTR) fi AC_MSG_RESULT($vi_cv_have_curses_tigetstr) dnl Check for potentially missing curses functions in system or user-specified dnl libraries. We also have to guess at whether the specified library is a dnl BSD or System V style curses. Use the newterm function, all System V dnl curses implementations have it, none, as far as I know, of the BSD ones do. if test "$vi_cv_curses" = "bundled curses"; then AC_DEFINE(HAVE_BSD_CURSES) AC_DEFINE(HAVE_CURSES_ADDNSTR) AC_DEFINE(HAVE_CURSES_IDLOK) else dnl Check for the addnstr function. AC_MSG_CHECKING(for addnstr) AC_CACHE_VAL(vi_cv_have_curses_addnstr, [dnl AC_TRY_LINK([#include ], [addnstr(0, 0);], [vi_cv_have_curses_addnstr=yes], [vi_cv_have_curses_addnstr=no])]) if test "$vi_cv_have_curses_addnstr" = yes; then AC_DEFINE(HAVE_CURSES_ADDNSTR) fi AC_MSG_RESULT($vi_cv_have_curses_addnstr) dnl Check for the beep function. AC_MSG_CHECKING(for beep) AC_CACHE_VAL(vi_cv_have_curses_beep, [dnl AC_TRY_LINK([#include ], [beep();], [vi_cv_have_curses_beep=yes], [vi_cv_have_curses_beep=no])]) if test "$vi_cv_have_curses_beep" = yes; then AC_DEFINE(HAVE_CURSES_BEEP) fi AC_MSG_RESULT($vi_cv_have_curses_beep) dnl Check for the flash function. AC_MSG_CHECKING(for flash) AC_CACHE_VAL(vi_cv_have_curses_flash, [dnl AC_TRY_LINK([#include ], [flash();], [vi_cv_have_curses_flash=yes], [vi_cv_have_curses_flash=no])]) if test "$vi_cv_have_curses_flash" = yes; then AC_DEFINE(HAVE_CURSES_FLASH) fi AC_MSG_RESULT($vi_cv_have_curses_flash) dnl Check for the idlok function. AC_MSG_CHECKING(for idlok) AC_CACHE_VAL(vi_cv_have_curses_idlok, [dnl AC_TRY_LINK([#include ], [idlok(0, 0);], [vi_cv_have_curses_idlok=yes], [vi_cv_have_curses_idlok=no])]) if test "$vi_cv_have_curses_idlok" = yes; then AC_DEFINE(HAVE_CURSES_IDLOK) fi AC_MSG_RESULT($vi_cv_have_curses_idlok) dnl Check for the keypad function. AC_MSG_CHECKING(for keypad) AC_CACHE_VAL(vi_cv_have_curses_keypad, [dnl AC_TRY_LINK([#include ], [keypad(0, 0);], [vi_cv_have_curses_keypad=yes], [vi_cv_have_curses_keypad=no])]) if test "$vi_cv_have_curses_keypad" = yes; then AC_DEFINE(HAVE_CURSES_KEYPAD) fi AC_MSG_RESULT($vi_cv_have_curses_keypad) dnl Check for the newterm function. AC_MSG_CHECKING(for newterm) AC_CACHE_VAL(vi_cv_have_curses_newterm, [dnl AC_TRY_LINK([#include ], [newterm(0, 0, 0);], [vi_cv_have_curses_newterm=yes], [vi_cv_have_curses_newterm=no])]) if test "$vi_cv_have_curses_newterm" = yes; then AC_DEFINE(HAVE_CURSES_NEWTERM) fi AC_MSG_RESULT($vi_cv_have_curses_newterm) if test "$vi_cv_have_curses_newterm" = no; then AC_DEFINE(HAVE_BSD_CURSES) fi fi dnl Check for the setupterm function. We make this check regardless of dnl using the system library, because it may be part of the underlying dnl termcap/termlib support, and we want to use the local one. AC_MSG_CHECKING(for setupterm) AC_CACHE_VAL(vi_cv_have_curses_setupterm, [dnl AC_TRY_LINK([#include ], [setupterm(0, 0, 0);], [vi_cv_have_curses_setupterm=yes], [vi_cv_have_curses_setupterm=no])]) if test "$vi_cv_have_curses_setupterm" = yes; then AC_DEFINE(HAVE_CURSES_SETUPTERM) fi AC_MSG_RESULT($vi_cv_have_curses_setupterm) dnl Some moron decided to drop off an argument from the gettimeofday call, dnl without changing the name. AC_MSG_CHECKING(for broken gettimeofday system call) AC_CACHE_VAL(vi_cv_gettimeofday, [dnl AC_TRY_LINK([#include #include ], [gettimeofday(0, 0);], [vi_cv_gettimeofday=okay], [vi_cv_gettimeofday=broken])]) if test "$vi_cv_gettimeofday" = broken; then AC_DEFINE(HAVE_BROKEN_GETTIMEOFDAY) fi AC_MSG_RESULT($vi_cv_gettimeofday) dnl Check for which version of openpty to use, System V or Berkeley. AC_MSG_CHECKING(for System V pty calls) AC_CACHE_VAL(vi_cv_sys5_pty, [dnl AC_TRY_LINK(, [grantpt(0);], [vi_cv_sys5_pty=yes], [vi_cv_sys5_pty=no])]) if test "$vi_cv_sys5_pty" = yes; then AC_DEFINE(HAVE_SYS5_PTY) fi AC_MSG_RESULT($vi_cv_sys5_pty) dnl Check for the revoke system call. AC_MSG_CHECKING(for revoke system call) AC_CACHE_VAL(vi_cv_revoke, [dnl AC_TRY_LINK(, [revoke("a");], [vi_cv_revoke=yes], [vi_cv_revoke=no])]) if test "$vi_cv_revoke" = yes; then AC_DEFINE(HAVE_REVOKE) fi AC_MSG_RESULT($vi_cv_revoke) dnl Some versions of sprintf return a pointer to the first argument instead dnl of a character count. We assume that the return value of snprintf and dnl vsprintf etc. will be the same as sprintf, and check the easy one. AC_MSG_CHECKING(for int type sprintf return value) AC_CACHE_VAL(vi_cv_sprintf_count, [dnl AC_TRY_RUN([main(){char buf[20]; exit(sprintf(buf, "XXX") != 3);}], [vi_cv_sprintf_count=yes], [vi_cv_sprintf_count=no])]) if test "$vi_cv_sprintf_count" = no; then AC_DEFINE(SPRINTF_RET_CHARPNT) fi AC_MSG_RESULT($vi_cv_sprintf_count) dnl We compile in nvi's DB routines only if the user specifies to. AC_MSG_CHECKING(if --enable-db option specified) AC_ARG_ENABLE(db, [ --enable-db Use the nvi-provided DB routines.], [vi_cv_db_lib="bundled DB"], [vi_cv_db_lib="other DB"]) AC_MSG_RESULT($vi_cv_db_lib) case "$vi_cv_db_lib" in "bundled DB") CPPFLAGS="-I\$(srcdir)/db/include $CPPFLAGS" LIBOBJS="\$(DBOBJS) $LIBOBJS";; "other DB") ;; esac dnl We compile in nvi's RE routines only if the user specifies to. AC_MSG_CHECKING(if --enable-re option specified) AC_ARG_ENABLE(re, [ --enable-re Use the nvi-provided RE routines.], [vi_cv_re_lib="bundled RE"], [vi_cv_re_lib="other RE"]) AC_MSG_RESULT($vi_cv_re_lib) case "$vi_cv_re_lib" in "bundled RE") CPPFLAGS="-I\$(srcdir)/regex $CPPFLAGS" LIBOBJS="\$(REOBJS) $LIBOBJS";; "other RE") ;; esac dnl Check for the standard shorthand types. AC_SUBST(u_char_decl) AC_MSG_CHECKING(for u_char) AC_CACHE_VAL(vi_cv_uchar, [dnl AC_TRY_COMPILE([#include ], u_char foo;, [vi_cv_uchar=yes], [vi_cv_uchar=no])]) AC_MSG_RESULT($vi_cv_uchar) if test "$vi_cv_uchar" = no; then u_char_decl="typedef unsigned char u_char;" fi AC_SUBST(u_short_decl) AC_MSG_CHECKING(for u_short) AC_CACHE_VAL(vi_cv_ushort, [dnl AC_TRY_COMPILE([#include ], u_short foo;, [vi_cv_ushort=yes], [vi_cv_ushort=no])]) AC_MSG_RESULT($vi_cv_ushort) if test "$vi_cv_ushort" = no; then u_short_decl="typedef unsigned short u_short;" fi AC_SUBST(u_int_decl) AC_MSG_CHECKING(for u_int) AC_CACHE_VAL(vi_cv_uint, [dnl AC_TRY_COMPILE([#include ], u_int foo;, [vi_cv_uint=yes], [vi_cv_uint=no])]) AC_MSG_RESULT($vi_cv_uint) if test "$vi_cv_uint" = no; then u_int_decl="typedef unsigned int u_int;" fi AC_SUBST(u_long_decl) AC_MSG_CHECKING(for u_long) AC_CACHE_VAL(vi_cv_ulong, [dnl AC_TRY_COMPILE([#include ], u_long foo;, [vi_cv_ulong=yes], [vi_cv_ulong=no])]) AC_MSG_RESULT($vi_cv_ulong) if test "$vi_cv_ulong" = no; then u_long_decl="typedef unsigned long u_long;" fi dnl DB/Vi use specific integer sizes. AC_SUBST(u_int8_decl) AC_MSG_CHECKING(for u_int8_t) AC_CACHE_VAL(vi_cv_uint8, [dnl AC_TRY_COMPILE([#include ], u_int8_t foo;, [vi_cv_uint8=yes], AC_TRY_COMPILE([#include ], uint8_t foo;, [vi_cv_uint8=uint8_t], AC_TRY_RUN([main(){exit(sizeof(unsigned char) != 1);}], [vi_cv_uint8="unsigned char"], [vi_cv_uint8=no])))]) AC_MSG_RESULT($vi_cv_uint8) if test "$vi_cv_uint8" = no; then echo echo "Fatal error: no unsigned, 8-bit integral type." exit 1 fi if test "$vi_cv_uint8" != yes; then u_int8_decl="typedef $vi_cv_uint8 u_int8_t;" fi AC_SUBST(u_int16_decl) AC_MSG_CHECKING(for u_int16_t) AC_CACHE_VAL(vi_cv_uint16, [dnl AC_TRY_COMPILE([#include ], u_int16_t foo;, [vi_cv_uint16=yes], AC_TRY_COMPILE([#include ], uint16_t foo;, [vi_cv_uint16=uint16_t], AC_TRY_RUN([main(){exit(sizeof(unsigned short) != 2);}], [vi_cv_uint16="unsigned short"], AC_TRY_RUN([main(){exit(sizeof(unsigned int) != 2);}], [vi_cv_uint16="unsigned int"], [vi_cv_uint16=no]))))]) AC_MSG_RESULT($vi_cv_uint16) if test "$vi_cv_uint16" = no; then echo echo "Fatal error: no unsigned, 16-bit integral type." exit 1 fi if test "$vi_cv_uint16" != yes; then u_int16_decl="typedef $vi_cv_uint16 u_int16_t;" fi AC_SUBST(int16_decl) AC_MSG_CHECKING(for int16_t) AC_CACHE_VAL(vi_cv_int16, [dnl AC_TRY_COMPILE([#include ], int16_t foo;, [vi_cv_int16=yes], AC_TRY_RUN([main(){exit(sizeof(short) != 2);}], [vi_cv_int16="short"], AC_TRY_RUN([main(){exit(sizeof(int) != 2);}], [vi_cv_int16="int"], [vi_cv_int16=no])))]) AC_MSG_RESULT($vi_cv_int16) if test "$vi_cv_int16" = no; then echo echo "Fatal error: no signed, 16-bit integral type." exit 1 fi if test "$vi_cv_int16" != yes; then int16_decl="typedef $vi_cv_int16 int16_t;" fi AC_SUBST(u_int32_decl) AC_MSG_CHECKING(for u_int32_t) AC_CACHE_VAL(vi_cv_uint32, [dnl AC_TRY_COMPILE([#include ], u_int32_t foo;, [vi_cv_uint32=yes], AC_TRY_COMPILE([#include ], uint32_t foo;, [vi_cv_uint32=uint32_t], AC_TRY_RUN([main(){exit(sizeof(unsigned int) != 4);}], [vi_cv_uint32="unsigned int"], AC_TRY_RUN([main(){exit(sizeof(unsigned long) != 4);}], [vi_cv_uint32="unsigned long"], [vi_cv_uint32=no]))))]) AC_MSG_RESULT($vi_cv_uint32) if test "$vi_cv_uint32" = no; then echo echo "Fatal error: no unsigned, 32-bit integral type." exit 1 fi if test "$vi_cv_uint32" != yes; then u_int32_decl="typedef $vi_cv_uint32 u_int32_t;" fi AC_SUBST(int32_decl) AC_MSG_CHECKING(for int32_t) AC_CACHE_VAL(vi_cv_int32, [dnl AC_TRY_COMPILE([#include ], int32_t foo;, [vi_cv_int32=yes], AC_TRY_RUN([main(){exit(sizeof(int) != 4);}], [vi_cv_int32="int"], AC_TRY_RUN([main(){exit(sizeof(long) != 4);}], [vi_cv_int32="long"], [vi_cv_int32=no])))]) AC_MSG_RESULT($vi_cv_int32) if test "$vi_cv_int32" = no; then echo echo "Fatal error: no signed, 32-bit integral type." exit 1 fi if test "$vi_cv_int32" != yes; then int32_decl="typedef $vi_cv_int32 int32_t;" fi AC_OUTPUT(Makefile port.h:port.h.in pathnames.h:pathnames.h.in recover:recover.in,echo timestamp > stamp-h) vigor-0.016.orig/build/port.h.in0100644000076400007640000000673707103707250015145 0ustar cjw44cjw44/* @(#)port.h.in 8.13 (Berkeley) 6/12/96 */ /* * Declare the basic types, if they aren't already declared. Named and * some system's db.h files protect them with __BIT_TYPES_DEFINED__. */ #ifndef __BIT_TYPES_DEFINED__ #define __BIT_TYPES_DEFINED__ @u_int8_decl@ @int16_decl@ @u_int16_decl@ @int32_decl@ @u_int32_decl@ #endif @u_char_decl@ @u_short_decl@ @u_int_decl@ @u_long_decl@ /* * XXX * Handle function prototypes. This steps on name space that vi doesn't * control, but all of the other solutions are worse. */ #undef __P #if defined(__STDC__) || defined(__cplusplus) #define __P(protos) protos /* ANSI C prototypes */ #else #define __P(protos) () /* K&R C preprocessor */ #endif /* * XXX * Some versions of System V changed the number of arguments to gettimeofday * without changing the name. */ #ifdef HAVE_BROKEN_GETTIMEOFDAY #define gettimeofday(tv, tz) gettimeofday(tv) #endif /* * XXX * If we don't have mmap, we fake it with read and write, but we'll * still need the header information. */ #ifndef HAVE_SYS_MMAN_H #define MAP_SHARED 1 /* share changes */ #define MAP_PRIVATE 2 /* changes are private */ #define PROT_READ 0x1 /* pages can be read */ #define PROT_WRITE 0x2 /* pages can be written */ #define PROT_EXEC 0x4 /* pages can be executed */ #endif /* * XXX * POSIX 1003.1 names for file descriptors. */ #ifndef STDERR_FILENO #define STDIN_FILENO 0 /* ANSI C #defines */ #define STDOUT_FILENO 1 #define STDERR_FILENO 2 #endif /* * XXX * POSIX 1003.1 names for seek settings. */ #ifndef SEEK_END #define SEEK_SET 0 /* POSIX 1003.1 seek values */ #define SEEK_CUR 1 #define SEEK_END 2 #endif /* * Hack _POSIX_VDISABLE to \377 since Ultrix doesn't honor _POSIX_VDISABLE * (treats it as ^@). The symptom is that the ^@ keystroke immediately * drops core. */ #ifdef HAVE_BROKEN_VDISABLE #undef _POSIX_VDISABLE #define _POSIX_VDISABLE ((unsigned char)'\377') #endif /* * XXX * POSIX 1003.1 tty disabling character. */ #ifndef _POSIX_VDISABLE #define _POSIX_VDISABLE 0 /* Some systems used 0. */ #endif /* * XXX * 4.4BSD extension to only set the software termios bits. */ #ifndef TCSASOFT /* 4.4BSD extension. */ #define TCSASOFT 0 #endif /* * XXX * POSIX 1003.1 maximum path length. */ #ifndef MAXPATHLEN #ifdef PATH_MAX #define MAXPATHLEN PATH_MAX #else #define MAXPATHLEN 1024 #endif #endif /* * XXX * MIN, MAX, historically in */ #ifndef MAX #define MAX(_a,_b) ((_a)<(_b)?(_b):(_a)) #endif #ifndef MIN #define MIN(_a,_b) ((_a)<(_b)?(_a):(_b)) #endif /* * XXX * "DB" isn't always portable, and we want the private information. */ #define DB L__DB #undef pgno_t /* IRIX has its own version. */ #define pgno_t L__db_pgno_t /* * XXX * 4.4BSD extension to provide lock values in the open(2) call. */ #ifndef O_EXLOCK #define O_EXLOCK 0 #endif #ifndef O_SHLOCK #define O_SHLOCK 0 #endif /* * XXX * POSIX 1003.1 bad file format errno. */ #ifndef EFTYPE #define EFTYPE EINVAL #endif /* * XXX * POSIX 1003.2 RE length limit. */ #ifndef _POSIX2_RE_DUP_MAX #define _POSIX2_RE_DUP_MAX 255 #endif /* * XXX * 4.4BSD extension to determine if a program dropped core from the exit * status. */ #ifndef WCOREDUMP #define WCOREDUMP(a) 0 #endif /* * XXX * Endian-ness of the machine. */ #if !defined(LITTLE_ENDIAN) #define LITTLE_ENDIAN 1234 #endif #if !defined(BIG_ENDIAN) #define BIG_ENDIAN 4321 #endif #if !defined(BYTE_ORDER) #if WORDS_BIGENDIAN == 1 #define BYTE_ORDER BIG_ENDIAN #else #define BYTE_ORDER LITTLE_ENDIAN #endif #endif vigor-0.016.orig/build/configure0100755000076400007640000044305707103707251015313 0ustar cjw44cjw44#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --enable-debug Build a debugging version." ac_help="$ac_help --with-x use the X Window System" ac_help="$ac_help --enable-perlinterp Include a Perl interpreter in vi." ac_help="$ac_help --enable-curses Use the nvi-provided curses routines." ac_help="$ac_help --enable-db Use the nvi-provided DB routines." ac_help="$ac_help --enable-re Use the nvi-provided RE routines." # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=../common/main.c # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_exeext= ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:570: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:629: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 if test "$program_transform_name" = s,x,x,; then program_transform_name= else # Double any \ or $. echo might interpret backslashes. cat <<\EOF_SED > conftestsed s,\\,\\\\,g; s,\$,$$,g EOF_SED program_transform_name="`echo $program_transform_name|sed -f conftestsed`" rm -f conftestsed fi test "$program_prefix" != NONE && program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking if --enable-debug option specified""... $ac_c" 1>&6 echo "configure:670: checking if --enable-debug option specified" >&5 # Check whether --enable-debug or --disable-debug was given. if test "${enable_debug+set}" = set; then enableval="$enable_debug" vi_cv_debug="yes" else vi_cv_debug="no" fi if test "$vi_cv_debug" = yes; then cat >> confdefs.h <<\EOF #define DEBUG 1 EOF OPTFLAG=${OPTFLAG-"-g"} no_op_OPTFLAG=${no_op_OPTFLAG-"-g"} fi echo "$ac_t""$vi_cv_debug" 1>&6 case "$host_os" in aix3.2.5) OPTFLAG=${OPTFLAG-"-O"};; aix4.1*) CFLAGS=${CFLAGS-"-qstrict"} OPTFLAG=${OPTFLAG-"-O3"};; aux*) CPPFLAGS=${CPPFLAGS-"-ZP -D_BSD_SOURCE -D_SYSV_SOURCE -D_AUX_SOURCE"} LDFLAGS=${LDFLAGS-"-ZP"} OPTFLAG=${OPTFLAG-"-O"};; bsd4.4) OPTFLAG=${OPTFLAG-"-O2"};; bsdi*) CC=${CC-"shlicc"} OPTFLAG=${OPTFLAG-"-O2"};; irix6*) OPTFLAG=${OPTFLAG-"-O2"};; irix*) OPTFLAG=${OPTFLAG-"-O2"};; lynxos*) # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:706: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:736: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then case "`uname -s`" in *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:787: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi ;; esac fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF #line 830 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:861: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:866: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes else GCC= fi ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:894: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi echo $ac_n "checking for GNU C (gcc) version 2.x""... $ac_c" 1>&6 echo "configure:926: checking for GNU C (gcc) version 2.x" >&5 ac_cv_gcc_vers=`${CC-cc} -v 2>&1 | \ grep "gcc version " | sed 's/.*version //'` ac_cv_gcc_major=`echo "$ac_cv_gcc_vers" | sed 's/\..*//'` if test "$ac_cv_gcc_major" = "2" ; then echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 echo "Fatal error: Nvi requires gcc 2.x to build on LynxOS." echo "See build/README.LynxOS for more information." exit 1 fi;; nextstep3) CPPFLAGS=${CPPFLAGS-"-w -pipe -posix"} LDFLAGS=${LDFLAGS-"-posix"} OPTFLAG=${OPTFLAG-"-O9"};; osf*) CFLAGS=${CFLAGS-"-Olimit 1000"};; solaris*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; sunos*) no_op_OPTFLAG=${no_op_OPTFLAG-""};; esac CC=${CC-cc} OPTFLAG=${OPTFLAG-"-O"} no_op_OPTFLAG=${no_op_OPTFLAG-"$OPTFLAG"} case "$host_os" in bsdi2.1) LIBS=${LIBS-"-lipc"};; dgux*) LIBS=${LIBS-"-ldgc"};; irix6*) LIBS=${LIBS-"-lbsd"};; irix*) LIBS=${LIBS-"-lc_s -lbsd"};; isc*) LIBS=${LIBS-"-lcposix -linet"};; netbsd1*) LIBS=${LIBS-"-lcrypt"};; ptx*) LIBS=${LIBS-"-lseq -linet -lsocket"};; sco3.2*) LIBS=${LIBS-"-lsocket"};; sinix*) LIBS=${LIBS-"-lelf -lc"};; solaris*) LIBS=${LIBS-"-lsocket -lnsl -ldl"} RLIBS=yes;; wgs*) LIBS=${LIBS-"-lnsl"};; esac case "$host_os" in aux*) LIBOBJS="getopt.o strpbrk.o $LIBOBJS";; esac case "$host_os" in ultrix*) cat >> confdefs.h <<\EOF #define HAVE_BROKEN_VDISABLE 1 EOF ;; esac CPPFLAGS="$ADDCPPFLAGS $CPPFLAGS" LDFLAGS="$ADDLDFLAGS $LDFLAGS" LIBS="$ADDLIBS $LIBS" echo $ac_n "checking whether the compiler ($CC $CFLAGS $LDFLAGS) actually works""... $ac_c" 1>&6 echo "configure:988: checking whether the compiler ($CC $CFLAGS $LDFLAGS) actually works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross if test "$cross_compiling" = yes; then cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_prog_cc_works=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* am_cv_prog_cc_works=no fi rm -f conftest* else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then am_cv_prog_cc_works=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* am_cv_prog_cc_works=no fi rm -fr conftest* fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross case "$am_cv_prog_cc_works" in *no) { echo "configure: error: Installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } ;; *yes) ;; esac echo "$ac_t""yes" 1>&6 PATH="$PATH:/usr/bin:/usr/sbin:/sbin:/etc:/usr/etc:/usr/lib:/usr/ucblib:" # Extract the first word of "sh", so it can be a program name with args. set dummy sh; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1053: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_shell'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_shell" in /*) ac_cv_path_vi_cv_path_shell="$vi_cv_path_shell" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_shell="$vi_cv_path_shell" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_shell="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_shell" && ac_cv_path_vi_cv_path_shell="no" ;; esac fi vi_cv_path_shell="$ac_cv_path_vi_cv_path_shell" if test -n "$vi_cv_path_shell"; then echo "$ac_t""$vi_cv_path_shell" 1>&6 else echo "$ac_t""no" 1>&6 fi if test "$vi_cv_path_shell" = no; then echo "Fatal error: the shell utility not found." exit 1 fi # Extract the first word of "sendmail", so it can be a program name with args. set dummy sendmail; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1094: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_sendmail'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_sendmail" in /*) ac_cv_path_vi_cv_path_sendmail="$vi_cv_path_sendmail" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_sendmail="$vi_cv_path_sendmail" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_sendmail="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_sendmail" && ac_cv_path_vi_cv_path_sendmail="no" ;; esac fi vi_cv_path_sendmail="$ac_cv_path_vi_cv_path_sendmail" if test -n "$vi_cv_path_sendmail"; then echo "$ac_t""$vi_cv_path_sendmail" 1>&6 else echo "$ac_t""no" 1>&6 fi if test "$vi_cv_path_sendmail" = no; then echo "WARNING: The sendmail utility was not found!" echo "WARNING: Users will not be told of saved files." fi for ac_prog in perl5 perl do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1138: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_perl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_perl" in /*) ac_cv_path_vi_cv_path_perl="$vi_cv_path_perl" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_perl="$vi_cv_path_perl" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_perl="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" ;; esac fi vi_cv_path_perl="$ac_cv_path_vi_cv_path_perl" if test -n "$vi_cv_path_perl"; then echo "$ac_t""$vi_cv_path_perl" 1>&6 else echo "$ac_t""no" 1>&6 fi test -n "$vi_cv_path_perl" && break done test -n "$vi_cv_path_perl" || vi_cv_path_perl="no" echo $ac_n "checking for preserve directory""... $ac_c" 1>&6 echo "configure:1177: checking for preserve directory" >&5 if eval "test \"`echo '$''{'vi_cv_path_preserve'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else dirlist="/var/preserve /var/tmp /usr/tmp" vi_cv_path_preserve=no for i in $dirlist; do if test -d $i/vi.recover; then vi_cv_path_preserve=$i/vi.recover break; fi done if test "$vi_cv_path_preserve" = no; then for i in $dirlist; do if test -d $i -a -w $i; then vi_cv_path_preserve=$i/vi.recover break; fi done fi fi if test "$vi_cv_path_preserve" = no; then echo "Fatal error: no writeable preserve directory found." exit 1 fi echo "$ac_t""$vi_cv_path_preserve" 1>&6 # Extract the first word of "chmod", so it can be a program name with args. set dummy chmod; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1209: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_chmod'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_chmod" in /*) ac_cv_path_vi_cv_path_chmod="$vi_cv_path_chmod" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_chmod="$vi_cv_path_chmod" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_chmod="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_chmod" && ac_cv_path_vi_cv_path_chmod="missing_chmod" ;; esac fi vi_cv_path_chmod="$ac_cv_path_vi_cv_path_chmod" if test -n "$vi_cv_path_chmod"; then echo "$ac_t""$vi_cv_path_chmod" 1>&6 else echo "$ac_t""no" 1>&6 fi # Extract the first word of "cp", so it can be a program name with args. set dummy cp; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1245: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_cp'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_cp" in /*) ac_cv_path_vi_cv_path_cp="$vi_cv_path_cp" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_cp="$vi_cv_path_cp" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_cp="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_cp" && ac_cv_path_vi_cv_path_cp="missing_cp" ;; esac fi vi_cv_path_cp="$ac_cv_path_vi_cv_path_cp" if test -n "$vi_cv_path_cp"; then echo "$ac_t""$vi_cv_path_cp" 1>&6 else echo "$ac_t""no" 1>&6 fi # Extract the first word of "ln", so it can be a program name with args. set dummy ln; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1281: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_ln'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_ln" in /*) ac_cv_path_vi_cv_path_ln="$vi_cv_path_ln" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_ln="$vi_cv_path_ln" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_ln="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_ln" && ac_cv_path_vi_cv_path_ln="missing_ln" ;; esac fi vi_cv_path_ln="$ac_cv_path_vi_cv_path_ln" if test -n "$vi_cv_path_ln"; then echo "$ac_t""$vi_cv_path_ln" 1>&6 else echo "$ac_t""no" 1>&6 fi # Extract the first word of "mkdir", so it can be a program name with args. set dummy mkdir; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1317: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_mkdir'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_mkdir" in /*) ac_cv_path_vi_cv_path_mkdir="$vi_cv_path_mkdir" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_mkdir="$vi_cv_path_mkdir" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_mkdir="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_mkdir" && ac_cv_path_vi_cv_path_mkdir="missing_mkdir" ;; esac fi vi_cv_path_mkdir="$ac_cv_path_vi_cv_path_mkdir" if test -n "$vi_cv_path_mkdir"; then echo "$ac_t""$vi_cv_path_mkdir" 1>&6 else echo "$ac_t""no" 1>&6 fi # Extract the first word of "rm", so it can be a program name with args. set dummy rm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1353: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_rm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_rm" in /*) ac_cv_path_vi_cv_path_rm="$vi_cv_path_rm" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_rm="$vi_cv_path_rm" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_rm="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_rm" && ac_cv_path_vi_cv_path_rm="missing_rm" ;; esac fi vi_cv_path_rm="$ac_cv_path_vi_cv_path_rm" if test -n "$vi_cv_path_rm"; then echo "$ac_t""$vi_cv_path_rm" 1>&6 else echo "$ac_t""no" 1>&6 fi # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1389: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_vi_cv_path_strip'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$vi_cv_path_strip" in /*) ac_cv_path_vi_cv_path_strip="$vi_cv_path_strip" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_vi_cv_path_strip="$vi_cv_path_strip" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_vi_cv_path_strip="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_vi_cv_path_strip" && ac_cv_path_vi_cv_path_strip="missing_strip" ;; esac fi vi_cv_path_strip="$ac_cv_path_vi_cv_path_strip" if test -n "$vi_cv_path_strip"; then echo "$ac_t""$vi_cv_path_strip" 1>&6 else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:1424: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1445: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1479: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 # If we find X, set shell vars x_includes and x_libraries to the # paths, otherwise set no_x=yes. # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 echo "configure:1508: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then withval="$with_x" : fi # $have_x is `yes', `no', `disabled', or empty when we do not yet know. if test "x$with_x" = xno; then # The user explicitly disabled X. have_x=disabled else if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then # Both variables are already set. have_x=yes else if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # One or both of the vars are not set, and there is no cached value. ac_x_includes=NO ac_x_libraries=NO rm -fr conftestdir if mkdir conftestdir; then cd conftestdir # Make sure to not put "make" in the Imakefile rules, since we grep it out. cat > Imakefile <<'EOF' acfindx: @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' EOF if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. for ac_extension in a so sl; do if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && test -f $ac_im_libdir/libX11.$ac_extension; then ac_im_usrlibdir=$ac_im_libdir; break fi done # Screen out bogus values from the imake configuration. They are # bogus both because they are the default anyway, and because # using them would break gcc on systems where it needs fixed includes. case "$ac_im_incroot" in /usr/include) ;; *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; esac case "$ac_im_usrlibdir" in /usr/lib | /lib) ;; *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; esac fi cd .. rm -fr conftestdir fi if test "$ac_x_includes" = NO; then # Guess where to find include files, by looking for this one X11 .h file. test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1575: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* # We can compile using X headers with no special include directory. ac_x_includes= else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* # Look for the header file in a standard set of common directories. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in \ /usr/X11/include \ /usr/X11R6/include \ /usr/X11R5/include \ /usr/X11R4/include \ \ /usr/include/X11 \ /usr/include/X11R6 \ /usr/include/X11R5 \ /usr/include/X11R4 \ \ /usr/local/X11/include \ /usr/local/X11R6/include \ /usr/local/X11R5/include \ /usr/local/X11R4/include \ \ /usr/local/include/X11 \ /usr/local/include/X11R6 \ /usr/local/include/X11R5 \ /usr/local/include/X11R4 \ \ /usr/X386/include \ /usr/x386/include \ /usr/XFree86/include/X11 \ \ /usr/include \ /usr/local/include \ /usr/unsupported/include \ /usr/athena/include \ /usr/local/x11r5/include \ /usr/lpp/Xamples/include \ \ /usr/openwin/include \ /usr/openwin/share/include \ ; \ do if test -r "$ac_dir/$x_direct_test_include"; then ac_x_includes=$ac_dir break fi done fi rm -f conftest* fi # $ac_x_includes = NO if test "$ac_x_libraries" = NO; then # Check for the libraries. test -z "$x_direct_test_library" && x_direct_test_library=Xt test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc # See if we find them without any special options. # Don't add to $LIBS permanently. ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. ac_x_libraries= else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* LIBS="$ac_save_LIBS" # First see if replacing the include by lib works. # Check X11 before X11Rn because it is often a symlink to the current release. for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ /usr/X11/lib \ /usr/X11R6/lib \ /usr/X11R5/lib \ /usr/X11R4/lib \ \ /usr/lib/X11 \ /usr/lib/X11R6 \ /usr/lib/X11R5 \ /usr/lib/X11R4 \ \ /usr/local/X11/lib \ /usr/local/X11R6/lib \ /usr/local/X11R5/lib \ /usr/local/X11R4/lib \ \ /usr/local/lib/X11 \ /usr/local/lib/X11R6 \ /usr/local/lib/X11R5 \ /usr/local/lib/X11R4 \ \ /usr/X386/lib \ /usr/x386/lib \ /usr/XFree86/lib/X11 \ \ /usr/lib \ /usr/local/lib \ /usr/unsupported/lib \ /usr/athena/lib \ /usr/local/x11r5/lib \ /usr/lpp/Xamples/lib \ /lib/usr/lib/X11 \ \ /usr/openwin/lib \ /usr/openwin/share/lib \ ; \ do for ac_extension in a so sl; do if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then ac_x_libraries=$ac_dir break 2 fi done done fi rm -f conftest* fi # $ac_x_libraries = NO if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then # Didn't find X anywhere. Cache the known absence of X. ac_cv_have_x="have_x=no" else # Record where we found X for the cache. ac_cv_have_x="have_x=yes \ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" fi fi fi eval "$ac_cv_have_x" fi # $with_x != no if test "$have_x" != yes; then echo "$ac_t""$have_x" 1>&6 no_x=yes else # If each of the values was on the command line, it overrides each guess. test "x$x_includes" = xNONE && x_includes=$ac_x_includes test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries # Update the cache value to reflect the command line values. ac_cv_have_x="have_x=yes \ ac_x_includes=$x_includes ac_x_libraries=$x_libraries" echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 fi if test "$no_x" = yes; then { echo "configure: error: X is required for Vigor" 1>&2; exit 1; } fi if test "X$x_libraries" != "X"; then if test "X$RLIBS" = "Xyes"; then XLIBS="-R$x_libraries -L$x_libraries $XLIBS" else XLIBS="-L$x_libraries $XLIBS" fi fi XLIBS="$XLIBS -lX11" if test "X$x_includes" != "X"; then XINCS="-I$x_includes" fi echo $ac_n "checking if --enable-perlinterp option specified""... $ac_c" 1>&6 echo "configure:1756: checking if --enable-perlinterp option specified" >&5 # Check whether --enable-perlinterp or --disable-perlinterp was given. if test "${enable_perlinterp+set}" = set; then enableval="$enable_perlinterp" vi_cv_perlinterp="yes" else vi_cv_perlinterp="no" fi echo "$ac_t""$vi_cv_perlinterp" 1>&6 if test "$vi_cv_perlinterp" = "yes"; then if test "$vi_cv_path_perl" = no; then echo "Fatal error: no perl5 utility found." exit 1 fi $vi_cv_path_perl -e 'require 5.002' || { echo "Fatal error: perl5 must be version 5.002 or later." exit 1 } $vi_cv_path_perl -e 'close(STDERR);require 5.003_01' && cat >> confdefs.h <<\EOF #define HAVE_PERL_5_003_01 1 EOF eval `$vi_cv_path_perl -V:shrpenv` if test "X$shrpenv" = "XUNKNOWN"; then # pre 5.003_04 shrpenv="" fi vi_cv_perllib=`$vi_cv_path_perl -MConfig -e 'print $Config{privlib}'` perlcppflags=`$vi_cv_path_perl -Mlib=$srcdir -MExtUtils::Embed \ -e 'ccflags;perl_inc'` if test "X$perlcppflags" != "X"; then CPPFLAGS="$perlcppflags $CPPFLAGS" fi perllibs=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ -e 'ldopts'` if test "X$perllibs" != "X"; then LIBS="$perllibs $LIBS" fi perlldflags=`cd $srcdir;$vi_cv_path_perl -MExtUtils::Embed \ -e 'ccdlflags'` if test "X$perlldflags" != "X"; then LDFLAGS="$perlldflags $LDFLAGS" fi LIBOBJS="perl.o perlsfio.o $LIBOBJS" cat >> confdefs.h <<\EOF #define HAVE_PERL_INTERP 1 EOF fi LIBOBJS="tcl.o $LIBOBJS" echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 echo "configure:1810: checking for dlopen in -ldl" >&5 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_lib=HAVE_LIB`echo dl | sed -e 's/[^a-zA-Z0-9_]/_/g' \ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` cat >> confdefs.h <&6 fi LIBS="$LIBS -lm" echo $ac_n "checking for library containing Tcl_Init""... $ac_c" 1>&6 echo "configure:1859: checking for library containing Tcl_Init" >&5 if eval "test \"`echo '$''{'ac_cv_search_Tcl_Init'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_func_search_save_LIBS="$LIBS" ac_cv_search_Tcl_Init="no" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_search_Tcl_Init="none required" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* test "$ac_cv_search_Tcl_Init" = "no" && for i in tcl tcl82 tcl8.2 tcl80 tcl8.0; do LIBS="-l$i $ac_func_search_save_LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_search_Tcl_Init="-l$i" break else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* done LIBS="$ac_func_search_save_LIBS" fi echo "$ac_t""$ac_cv_search_Tcl_Init" 1>&6 if test "$ac_cv_search_Tcl_Init" != "no"; then test "$ac_cv_search_Tcl_Init" = "none required" || LIBS="$ac_cv_search_Tcl_Init $LIBS" else : { echo "configure: error: Tcl is required for Vigor but could not be located." 1>&2; exit 1; } fi echo $ac_n "checking for library containing Tk_Init""... $ac_c" 1>&6 echo "configure:1921: checking for library containing Tk_Init" >&5 if eval "test \"`echo '$''{'ac_cv_search_Tk_Init'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_func_search_save_LIBS="$LIBS" ac_cv_search_Tk_Init="no" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_search_Tk_Init="none required" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* test "$ac_cv_search_Tk_Init" = "no" && for i in tk tk82 tk8.2 tk80 tk8.0; do LIBS="-l$i $XLIBS $ac_func_search_save_LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_search_Tk_Init="-l$i" break else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* done LIBS="$ac_func_search_save_LIBS" fi echo "$ac_t""$ac_cv_search_Tk_Init" 1>&6 if test "$ac_cv_search_Tk_Init" != "no"; then test "$ac_cv_search_Tk_Init" = "none required" || LIBS="$ac_cv_search_Tk_Init $LIBS" else : { echo "configure: error: Tk is required for Vigor but could not be located." 1>&2; exit 1; } fi LIBS="$LIBS $XLIBS -lm" cat >> confdefs.h <<\EOF #define HAVE_TCL_INTERP 1 EOF LIBOBJS="api.o $LIBOBJS" echo $ac_n "checking for tgetent in -ltermlib""... $ac_c" 1>&6 echo "configure:1990: checking for tgetent in -ltermlib" >&5 ac_lib_var=`echo termlib'_'tgetent | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ltermlib $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 vi_cv_termlib=-ltermlib else echo "$ac_t""no" 1>&6 vi_cv_termlib=no fi if test "$vi_cv_termlib" = no; then echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6 echo "configure:2032: checking for tgetent in -ltermcap" >&5 ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ltermcap $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 vi_cv_termlib=-ltermcap else echo "$ac_t""no" 1>&6 vi_cv_termlib=no fi fi if test "$vi_cv_termlib" != no; then LIBS="$vi_cv_termlib $LIBS" fi echo $ac_n "checking if --enable-curses option specified""... $ac_c" 1>&6 echo "configure:2078: checking if --enable-curses option specified" >&5 # Check whether --enable-curses or --disable-curses was given. if test "${enable_curses+set}" = set; then enableval="$enable_curses" vi_cv_curses="bundled curses" else vi_cv_curses="other curses" fi echo "$ac_t""$vi_cv_curses" 1>&6 case "$vi_cv_curses" in "bundled curses") CPPFLAGS="-I\$(srcdir)/curses $CPPFLAGS" cobjs="\$(COBJS)";; "other curses") LIBS="-lcurses $LIBS";; esac echo $ac_n "checking for sys/mman.h""... $ac_c" 1>&6 echo "configure:2097: checking for sys/mman.h" >&5 if eval "test \"`echo '$''{'vi_cv_include_sys_mman'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* vi_cv_include_sys_mman=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_include_sys_mman=no fi rm -f conftest* fi if test "$vi_cv_include_sys_mman" = yes; then cat >> confdefs.h <<\EOF #define HAVE_SYS_MMAN_H 1 EOF fi echo "$ac_t""$vi_cv_include_sys_mman" 1>&6 echo $ac_n "checking for sys/select.h""... $ac_c" 1>&6 echo "configure:2131: checking for sys/select.h" >&5 if eval "test \"`echo '$''{'vi_cv_include_sys_select'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2141: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* vi_cv_include_sys_select=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_include_sys_select=no fi rm -f conftest* fi if test "$vi_cv_include_sys_select" = yes; then cat >> confdefs.h <<\EOF #define HAVE_SYS_SELECT_H 1 EOF fi echo "$ac_t""$vi_cv_include_sys_select" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 echo "configure:2165: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include #include #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2178: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "memchr" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "free" >/dev/null 2>&1; then : else rm -rf conftest* ac_cv_header_stdc=no fi rm -f conftest* fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') #define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) #define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) int main () { int i; for (i = 0; i < 256; i++) if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF if { (eval echo configure:2245: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_header_stdc=no fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_header_stdc" 1>&6 if test $ac_cv_header_stdc = yes; then cat >> confdefs.h <<\EOF #define STDC_HEADERS 1 EOF fi echo $ac_n "checking for ssize_t""... $ac_c" 1>&6 echo "configure:2269: checking for ssize_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])ssize_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_ssize_t=yes else rm -rf conftest* ac_cv_type_ssize_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_ssize_t" 1>&6 if test $ac_cv_type_ssize_t = no; then cat >> confdefs.h <<\EOF #define ssize_t int EOF fi echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 echo "configure:2302: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include int main() { #if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN bogus endian macros #endif ; return 0; } EOF if { (eval echo configure:2320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include int main() { #if BYTE_ORDER != BIG_ENDIAN not big endian #endif ; return 0; } EOF if { (eval echo configure:2335: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_c_bigendian=no fi rm -f conftest* else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* if test $ac_cv_c_bigendian = unknown; then if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_c_bigendian=yes fi rm -fr conftest* fi fi fi echo "$ac_t""$ac_cv_c_bigendian" 1>&6 if test $ac_cv_c_bigendian = yes; then cat >> confdefs.h <<\EOF #define WORDS_BIGENDIAN 1 EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 echo "configure:2392: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; } ; return 0; } EOF if { (eval echo configure:2446: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_c_const=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_c_const" 1>&6 if test $ac_cv_c_const = no; then cat >> confdefs.h <<\EOF #define const EOF fi echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6 echo "configure:2467: checking for st_blksize in struct stat" >&5 if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { struct stat s; s.st_blksize; ; return 0; } EOF if { (eval echo configure:2480: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_st_blksize=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_struct_st_blksize=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_st_blksize" 1>&6 if test $ac_cv_struct_st_blksize = yes; then cat >> confdefs.h <<\EOF #define HAVE_ST_BLKSIZE 1 EOF fi echo $ac_n "checking for mode_t""... $ac_c" 1>&6 echo "configure:2501: checking for mode_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_mode_t=yes else rm -rf conftest* ac_cv_type_mode_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_mode_t" 1>&6 if test $ac_cv_type_mode_t = no; then cat >> confdefs.h <<\EOF #define mode_t int EOF fi echo $ac_n "checking for off_t""... $ac_c" 1>&6 echo "configure:2534: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else rm -rf conftest* ac_cv_type_off_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_off_t" 1>&6 if test $ac_cv_type_off_t = no; then cat >> confdefs.h <<\EOF #define off_t long EOF fi echo $ac_n "checking for pid_t""... $ac_c" 1>&6 echo "configure:2567: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_pid_t=yes else rm -rf conftest* ac_cv_type_pid_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_pid_t" 1>&6 if test $ac_cv_type_pid_t = no; then cat >> confdefs.h <<\EOF #define pid_t int EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 echo "configure:2600: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS #include #include #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else rm -rf conftest* ac_cv_type_size_t=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_type_size_t" 1>&6 if test $ac_cv_type_size_t = no; then cat >> confdefs.h <<\EOF #define size_t unsigned EOF fi echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 echo "configure:2633: checking whether struct tm is in sys/time.h or time.h" >&5 if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { struct tm *tp; tp->tm_sec; ; return 0; } EOF if { (eval echo configure:2646: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_struct_tm=time.h else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_struct_tm=sys/time.h fi rm -f conftest* fi echo "$ac_t""$ac_cv_struct_tm" 1>&6 if test $ac_cv_struct_tm = sys/time.h; then cat >> confdefs.h <<\EOF #define TM_IN_SYS_TIME 1 EOF fi for ac_func in bsearch gethostname getopt memchr memcpy memmove memset do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2670: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2698: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in bsearch gethostname getopt memchr memcpy memmove memset do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2725: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}" fi done for ac_func in mkstemp mmap snprintf strdup strerror strpbrk strtol do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2782: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in mkstemp mmap snprintf strdup strerror strpbrk strtol do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2837: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}" fi done for ac_func in strtoul vsnprintf do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2894: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2922: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in strtoul vsnprintf do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:2949: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:2977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}" fi done for ac_func in select do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:3007: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:3035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done for ac_func in setenv do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:3062: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:3090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 need_env=yes fi done for ac_func in strsep do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:3118: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:3146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 need_strsep=yes fi done for ac_func in unsetenv do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:3174: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:3202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 need_env=yes fi done for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:3232: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:3242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 echo "configure:3271: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char $ac_func(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_$ac_func) || defined (__stub___$ac_func) choke me #else $ac_func(); #endif ; return 0; } EOF if { (eval echo configure:3299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_$ac_func=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` cat >> confdefs.h <&6 fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 echo "configure:3324: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext < #include #include /* This mess was copied from the GNU getpagesize.h. */ #ifndef HAVE_GETPAGESIZE # ifdef HAVE_UNISTD_H # include # endif /* Assume that all systems that can run configure have sys/param.h. */ # ifndef HAVE_SYS_PARAM_H # define HAVE_SYS_PARAM_H 1 # endif # ifdef _SC_PAGESIZE # define getpagesize() sysconf(_SC_PAGESIZE) # else /* no _SC_PAGESIZE */ # ifdef HAVE_SYS_PARAM_H # include # ifdef EXEC_PAGESIZE # define getpagesize() EXEC_PAGESIZE # else /* no EXEC_PAGESIZE */ # ifdef NBPG # define getpagesize() NBPG * CLSIZE # ifndef CLSIZE # define CLSIZE 1 # endif /* no CLSIZE */ # else /* no NBPG */ # ifdef NBPC # define getpagesize() NBPC # else /* no NBPC */ # ifdef PAGESIZE # define getpagesize() PAGESIZE # endif /* PAGESIZE */ # endif /* no NBPC */ # endif /* no NBPG */ # endif /* no EXEC_PAGESIZE */ # else /* no HAVE_SYS_PARAM_H */ # define getpagesize() 8192 /* punt totally */ # endif /* no HAVE_SYS_PARAM_H */ # endif /* no _SC_PAGESIZE */ #endif /* no HAVE_GETPAGESIZE */ #ifdef __cplusplus extern "C" { void *malloc(unsigned); } #else char *malloc(); #endif int main() { char *data, *data2, *data3; int i, pagesize; int fd; pagesize = getpagesize(); /* * First, make a file with some known garbage in it. */ data = malloc(pagesize); if (!data) exit(1); for (i = 0; i < pagesize; ++i) *(data + i) = rand(); umask(0); fd = creat("conftestmmap", 0600); if (fd < 0) exit(1); if (write(fd, data, pagesize) != pagesize) exit(1); close(fd); /* * Next, try to mmap the file at a fixed address which * already has something else allocated at it. If we can, * also make sure that we see the same garbage. */ fd = open("conftestmmap", O_RDWR); if (fd < 0) exit(1); data2 = malloc(2 * pagesize); if (!data2) exit(1); data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1); if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_FIXED, fd, 0L)) exit(1); for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data2 + i)) exit(1); /* * Finally, make sure that changes to the mapped area * do not percolate back to the file as seen by read(). * (This is a bug on some variants of i386 svr4.0.) */ for (i = 0; i < pagesize; ++i) *(data2 + i) = *(data2 + i) + 1; data3 = malloc(pagesize); if (!data3) exit(1); if (read(fd, data3, pagesize) != pagesize) exit(1); for (i = 0; i < pagesize; ++i) if (*(data + i) != *(data3 + i)) exit(1); close(fd); unlink("conftestmmap"); exit(0); } EOF if { (eval echo configure:3472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_func_mmap_fixed_mapped=no fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6 if test $ac_cv_func_mmap_fixed_mapped = yes; then cat >> confdefs.h <<\EOF #define HAVE_MMAP 1 EOF fi ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for vfork.h""... $ac_c" 1>&6 echo "configure:3496: checking for vfork.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:3506: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 cat >> confdefs.h <<\EOF #define HAVE_VFORK_H 1 EOF else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking for working vfork""... $ac_c" 1>&6 echo "configure:3531: checking for working vfork" >&5 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then echo $ac_n "checking for vfork""... $ac_c" 1>&6 echo "configure:3537: checking for vfork" >&5 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char vfork(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_vfork) || defined (__stub___vfork) choke me #else vfork(); #endif ; return 0; } EOF if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_vfork=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_vfork=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'vfork`\" = yes"; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 fi ac_cv_func_vfork_works=$ac_cv_func_vfork else cat > conftest.$ac_ext < #include #include #ifdef HAVE_UNISTD_H #include #endif #ifdef HAVE_VFORK_H #include #endif /* On some sparc systems, changes by the child to local and incoming argument registers are propagated back to the parent. The compiler is told about this with #include , but some compilers (e.g. gcc -O) don't grok . Test for this by using a static variable whose address is put into a register that is clobbered by the vfork. */ static #ifdef __cplusplus sparc_address_test (int arg) #else sparc_address_test (arg) int arg; #endif { static pid_t child; if (!child) { child = vfork (); if (child < 0) { perror ("vfork"); _exit(2); } if (!child) { arg = getpid(); write(-1, "", 0); _exit (arg); } } } main() { pid_t parent = getpid (); pid_t child; sparc_address_test (); child = vfork (); if (child == 0) { /* Here is another test for sparc vfork register problems. This test uses lots of local variables, at least as many local variables as main has allocated so far including compiler temporaries. 4 locals are enough for gcc 1.40.3 on a Solaris 4.1.3 sparc, but we use 8 to be safe. A buggy compiler should reuse the register of parent for one of the local variables, since it will think that parent can't possibly be used any more in this routine. Assigning to the local variable will thus munge parent in the parent process. */ pid_t p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); /* Convince the compiler that p..p7 are live; otherwise, it might use the same hardware register for all 8 local variables. */ if (p != p1 || p != p2 || p != p3 || p != p4 || p != p5 || p != p6 || p != p7) _exit(1); /* On some systems (e.g. IRIX 3.3), vfork doesn't separate parent from child file descriptors. If the child closes a descriptor before it execs or exits, this munges the parent's descriptor as well. Test for this by closing stdout in the child. */ _exit(close(fileno(stdout)) != 0); } else { int status; struct stat st; while (wait(&status) != child) ; exit( /* Was there some problem with vforking? */ child < 0 /* Did the child fail? (This shouldn't happen.) */ || status /* Did the vfork/compiler bug occur? */ || parent != getpid() /* Did the file descriptor bug occur? */ || fstat(fileno(stdout), &st) != 0 ); } } EOF if { (eval echo configure:3682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_vfork_works=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* ac_cv_func_vfork_works=no fi rm -fr conftest* fi fi echo "$ac_t""$ac_cv_func_vfork_works" 1>&6 if test $ac_cv_func_vfork_works = no; then cat >> confdefs.h <<\EOF #define vfork fork EOF fi if test "$need_env" = yes; then LIBOBJS="env.o $LIBOBJS" fi if test "$need_strsep" = yes; then LIBOBJS="strsep.o $LIBOBJS" fi echo $ac_n "checking for fcntl/flock""... $ac_c" 1>&6 echo "configure:3714: checking for fcntl/flock" >&5 if eval "test \"`echo '$''{'vi_cv_lock'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else vi_cv_lock=none case "$host_os" in dgux*);; irix*);; *) cat > conftest.$ac_ext < int main() { flock(0, 0); ; return 0; } EOF if { (eval echo configure:3731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_lock=flock else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest*;; esac if test "$vi_cv_lock" = none; then cat > conftest.$ac_ext < int main() { fcntl(0, F_SETLK, 0); ; return 0; } EOF if { (eval echo configure:3749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_lock=fcntl else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* fi fi if test "$vi_cv_lock" = flock; then cat >> confdefs.h <<\EOF #define HAVE_LOCK_FLOCK 1 EOF fi if test "$vi_cv_lock" = fcntl; then cat >> confdefs.h <<\EOF #define HAVE_LOCK_FCNTL 1 EOF fi echo "$ac_t""$vi_cv_lock" 1>&6 echo $ac_n "checking for ftruncate/chsize""... $ac_c" 1>&6 echo "configure:3776: checking for ftruncate/chsize" >&5 if eval "test \"`echo '$''{'vi_cv_ftruncate'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { ftruncate(0, 0); ; return 0; } EOF if { (eval echo configure:3788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_ftruncate=ftruncate else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < int main() { chsize(0, 0); ; return 0; } EOF if { (eval echo configure:3803: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_ftruncate=chsize else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_ftruncate=no fi rm -f conftest* fi rm -f conftest* fi if test "$vi_cv_ftruncate" = ftruncate; then cat >> confdefs.h <<\EOF #define HAVE_FTRUNCATE_FTRUNCATE 1 EOF fi if test "$vi_cv_ftruncate" = chsize; then cat >> confdefs.h <<\EOF #define HAVE_FTRUNCATE_CHSIZE 1 EOF fi if test "$vi_cv_ftruncate" = no; then echo echo "Fatal error: no file truncation system call." exit 1 fi echo "$ac_t""$vi_cv_ftruncate" 1>&6 echo $ac_n "checking for tigetstr/tigetnum""... $ac_c" 1>&6 echo "configure:3837: checking for tigetstr/tigetnum" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_tigetstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { tigetstr(0); ; return 0; } EOF if { (eval echo configure:3849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_tigetstr=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_tigetstr=no fi rm -f conftest* fi if test "$vi_cv_have_curses_tigetstr" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_TIGETSTR 1 EOF fi echo "$ac_t""$vi_cv_have_curses_tigetstr" 1>&6 if test "$vi_cv_curses" = "bundled curses"; then cat >> confdefs.h <<\EOF #define HAVE_BSD_CURSES 1 EOF cat >> confdefs.h <<\EOF #define HAVE_CURSES_ADDNSTR 1 EOF cat >> confdefs.h <<\EOF #define HAVE_CURSES_IDLOK 1 EOF else echo $ac_n "checking for addnstr""... $ac_c" 1>&6 echo "configure:3884: checking for addnstr" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_addnstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { addnstr(0, 0); ; return 0; } EOF if { (eval echo configure:3896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_addnstr=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_addnstr=no fi rm -f conftest* fi if test "$vi_cv_have_curses_addnstr" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_ADDNSTR 1 EOF fi echo "$ac_t""$vi_cv_have_curses_addnstr" 1>&6 echo $ac_n "checking for beep""... $ac_c" 1>&6 echo "configure:3917: checking for beep" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_beep'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { beep(); ; return 0; } EOF if { (eval echo configure:3929: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_beep=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_beep=no fi rm -f conftest* fi if test "$vi_cv_have_curses_beep" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_BEEP 1 EOF fi echo "$ac_t""$vi_cv_have_curses_beep" 1>&6 echo $ac_n "checking for flash""... $ac_c" 1>&6 echo "configure:3950: checking for flash" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_flash'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { flash(); ; return 0; } EOF if { (eval echo configure:3962: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_flash=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_flash=no fi rm -f conftest* fi if test "$vi_cv_have_curses_flash" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_FLASH 1 EOF fi echo "$ac_t""$vi_cv_have_curses_flash" 1>&6 echo $ac_n "checking for idlok""... $ac_c" 1>&6 echo "configure:3983: checking for idlok" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_idlok'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { idlok(0, 0); ; return 0; } EOF if { (eval echo configure:3995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_idlok=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_idlok=no fi rm -f conftest* fi if test "$vi_cv_have_curses_idlok" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_IDLOK 1 EOF fi echo "$ac_t""$vi_cv_have_curses_idlok" 1>&6 echo $ac_n "checking for keypad""... $ac_c" 1>&6 echo "configure:4016: checking for keypad" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_keypad'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { keypad(0, 0); ; return 0; } EOF if { (eval echo configure:4028: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_keypad=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_keypad=no fi rm -f conftest* fi if test "$vi_cv_have_curses_keypad" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_KEYPAD 1 EOF fi echo "$ac_t""$vi_cv_have_curses_keypad" 1>&6 echo $ac_n "checking for newterm""... $ac_c" 1>&6 echo "configure:4049: checking for newterm" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_newterm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { newterm(0, 0, 0); ; return 0; } EOF if { (eval echo configure:4061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_newterm=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_newterm=no fi rm -f conftest* fi if test "$vi_cv_have_curses_newterm" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_NEWTERM 1 EOF fi echo "$ac_t""$vi_cv_have_curses_newterm" 1>&6 if test "$vi_cv_have_curses_newterm" = no; then cat >> confdefs.h <<\EOF #define HAVE_BSD_CURSES 1 EOF fi fi echo $ac_n "checking for setupterm""... $ac_c" 1>&6 echo "configure:4090: checking for setupterm" >&5 if eval "test \"`echo '$''{'vi_cv_have_curses_setupterm'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { setupterm(0, 0, 0); ; return 0; } EOF if { (eval echo configure:4102: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_have_curses_setupterm=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_have_curses_setupterm=no fi rm -f conftest* fi if test "$vi_cv_have_curses_setupterm" = yes; then cat >> confdefs.h <<\EOF #define HAVE_CURSES_SETUPTERM 1 EOF fi echo "$ac_t""$vi_cv_have_curses_setupterm" 1>&6 echo $ac_n "checking for broken gettimeofday system call""... $ac_c" 1>&6 echo "configure:4123: checking for broken gettimeofday system call" >&5 if eval "test \"`echo '$''{'vi_cv_gettimeofday'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include int main() { gettimeofday(0, 0); ; return 0; } EOF if { (eval echo configure:4136: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_gettimeofday=okay else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_gettimeofday=broken fi rm -f conftest* fi if test "$vi_cv_gettimeofday" = broken; then cat >> confdefs.h <<\EOF #define HAVE_BROKEN_GETTIMEOFDAY 1 EOF fi echo "$ac_t""$vi_cv_gettimeofday" 1>&6 echo $ac_n "checking for System V pty calls""... $ac_c" 1>&6 echo "configure:4157: checking for System V pty calls" >&5 if eval "test \"`echo '$''{'vi_cv_sys5_pty'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_sys5_pty=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_sys5_pty=no fi rm -f conftest* fi if test "$vi_cv_sys5_pty" = yes; then cat >> confdefs.h <<\EOF #define HAVE_SYS5_PTY 1 EOF fi echo "$ac_t""$vi_cv_sys5_pty" 1>&6 echo $ac_n "checking for revoke system call""... $ac_c" 1>&6 echo "configure:4190: checking for revoke system call" >&5 if eval "test \"`echo '$''{'vi_cv_revoke'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* vi_cv_revoke=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_revoke=no fi rm -f conftest* fi if test "$vi_cv_revoke" = yes; then cat >> confdefs.h <<\EOF #define HAVE_REVOKE 1 EOF fi echo "$ac_t""$vi_cv_revoke" 1>&6 echo $ac_n "checking for int type sprintf return value""... $ac_c" 1>&6 echo "configure:4223: checking for int type sprintf return value" >&5 if eval "test \"`echo '$''{'vi_cv_sprintf_count'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_sprintf_count=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* vi_cv_sprintf_count=no fi rm -fr conftest* fi fi if test "$vi_cv_sprintf_count" = no; then cat >> confdefs.h <<\EOF #define SPRINTF_RET_CHARPNT 1 EOF fi echo "$ac_t""$vi_cv_sprintf_count" 1>&6 echo $ac_n "checking if --enable-db option specified""... $ac_c" 1>&6 echo "configure:4258: checking if --enable-db option specified" >&5 # Check whether --enable-db or --disable-db was given. if test "${enable_db+set}" = set; then enableval="$enable_db" vi_cv_db_lib="bundled DB" else vi_cv_db_lib="other DB" fi echo "$ac_t""$vi_cv_db_lib" 1>&6 case "$vi_cv_db_lib" in "bundled DB") CPPFLAGS="-I\$(srcdir)/db/include $CPPFLAGS" LIBOBJS="\$(DBOBJS) $LIBOBJS";; "other DB") ;; esac echo $ac_n "checking if --enable-re option specified""... $ac_c" 1>&6 echo "configure:4277: checking if --enable-re option specified" >&5 # Check whether --enable-re or --disable-re was given. if test "${enable_re+set}" = set; then enableval="$enable_re" vi_cv_re_lib="bundled RE" else vi_cv_re_lib="other RE" fi echo "$ac_t""$vi_cv_re_lib" 1>&6 case "$vi_cv_re_lib" in "bundled RE") CPPFLAGS="-I\$(srcdir)/regex $CPPFLAGS" LIBOBJS="\$(REOBJS) $LIBOBJS";; "other RE") ;; esac echo $ac_n "checking for u_char""... $ac_c" 1>&6 echo "configure:4297: checking for u_char" >&5 if eval "test \"`echo '$''{'vi_cv_uchar'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { u_char foo; ; return 0; } EOF if { (eval echo configure:4309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uchar=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_uchar=no fi rm -f conftest* fi echo "$ac_t""$vi_cv_uchar" 1>&6 if test "$vi_cv_uchar" = no; then u_char_decl="typedef unsigned char u_char;" fi echo $ac_n "checking for u_short""... $ac_c" 1>&6 echo "configure:4328: checking for u_short" >&5 if eval "test \"`echo '$''{'vi_cv_ushort'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { u_short foo; ; return 0; } EOF if { (eval echo configure:4340: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_ushort=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_ushort=no fi rm -f conftest* fi echo "$ac_t""$vi_cv_ushort" 1>&6 if test "$vi_cv_ushort" = no; then u_short_decl="typedef unsigned short u_short;" fi echo $ac_n "checking for u_int""... $ac_c" 1>&6 echo "configure:4359: checking for u_int" >&5 if eval "test \"`echo '$''{'vi_cv_uint'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { u_int foo; ; return 0; } EOF if { (eval echo configure:4371: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uint=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_uint=no fi rm -f conftest* fi echo "$ac_t""$vi_cv_uint" 1>&6 if test "$vi_cv_uint" = no; then u_int_decl="typedef unsigned int u_int;" fi echo $ac_n "checking for u_long""... $ac_c" 1>&6 echo "configure:4390: checking for u_long" >&5 if eval "test \"`echo '$''{'vi_cv_ulong'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { u_long foo; ; return 0; } EOF if { (eval echo configure:4402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_ulong=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* vi_cv_ulong=no fi rm -f conftest* fi echo "$ac_t""$vi_cv_ulong" 1>&6 if test "$vi_cv_ulong" = no; then u_long_decl="typedef unsigned long u_long;" fi echo $ac_n "checking for u_int8_t""... $ac_c" 1>&6 echo "configure:4421: checking for u_int8_t" >&5 if eval "test \"`echo '$''{'vi_cv_uint8'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { u_int8_t foo; ; return 0; } EOF if { (eval echo configure:4433: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uint8=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < int main() { uint8_t foo; ; return 0; } EOF if { (eval echo configure:4448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uint8=uint8_t else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_uint8="unsigned char" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* vi_cv_uint8=no fi rm -fr conftest* fi fi rm -f conftest* fi rm -f conftest* fi echo "$ac_t""$vi_cv_uint8" 1>&6 if test "$vi_cv_uint8" = no; then echo echo "Fatal error: no unsigned, 8-bit integral type." exit 1 fi if test "$vi_cv_uint8" != yes; then u_int8_decl="typedef $vi_cv_uint8 u_int8_t;" fi echo $ac_n "checking for u_int16_t""... $ac_c" 1>&6 echo "configure:4493: checking for u_int16_t" >&5 if eval "test \"`echo '$''{'vi_cv_uint16'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { u_int16_t foo; ; return 0; } EOF if { (eval echo configure:4505: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uint16=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < int main() { uint16_t foo; ; return 0; } EOF if { (eval echo configure:4520: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uint16=uint16_t else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_uint16="unsigned short" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_uint16="unsigned int" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* vi_cv_uint16=no fi rm -fr conftest* fi fi rm -fr conftest* fi fi rm -f conftest* fi rm -f conftest* fi echo "$ac_t""$vi_cv_uint16" 1>&6 if test "$vi_cv_uint16" = no; then echo echo "Fatal error: no unsigned, 16-bit integral type." exit 1 fi if test "$vi_cv_uint16" != yes; then u_int16_decl="typedef $vi_cv_uint16 u_int16_t;" fi echo $ac_n "checking for int16_t""... $ac_c" 1>&6 echo "configure:4584: checking for int16_t" >&5 if eval "test \"`echo '$''{'vi_cv_int16'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { int16_t foo; ; return 0; } EOF if { (eval echo configure:4596: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_int16=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_int16="short" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_int16="int" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* vi_cv_int16=no fi rm -fr conftest* fi fi rm -fr conftest* fi fi rm -f conftest* fi echo "$ac_t""$vi_cv_int16" 1>&6 if test "$vi_cv_int16" = no; then echo echo "Fatal error: no signed, 16-bit integral type." exit 1 fi if test "$vi_cv_int16" != yes; then int16_decl="typedef $vi_cv_int16 int16_t;" fi echo $ac_n "checking for u_int32_t""... $ac_c" 1>&6 echo "configure:4658: checking for u_int32_t" >&5 if eval "test \"`echo '$''{'vi_cv_uint32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { u_int32_t foo; ; return 0; } EOF if { (eval echo configure:4670: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uint32=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* cat > conftest.$ac_ext < int main() { uint32_t foo; ; return 0; } EOF if { (eval echo configure:4685: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_uint32=uint32_t else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_uint32="unsigned int" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_uint32="unsigned long" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* vi_cv_uint32=no fi rm -fr conftest* fi fi rm -fr conftest* fi fi rm -f conftest* fi rm -f conftest* fi echo "$ac_t""$vi_cv_uint32" 1>&6 if test "$vi_cv_uint32" = no; then echo echo "Fatal error: no unsigned, 32-bit integral type." exit 1 fi if test "$vi_cv_uint32" != yes; then u_int32_decl="typedef $vi_cv_uint32 u_int32_t;" fi echo $ac_n "checking for int32_t""... $ac_c" 1>&6 echo "configure:4749: checking for int32_t" >&5 if eval "test \"`echo '$''{'vi_cv_int32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { int32_t foo; ; return 0; } EOF if { (eval echo configure:4761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* vi_cv_int32=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_int32="int" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then vi_cv_int32="long" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* vi_cv_int32=no fi rm -fr conftest* fi fi rm -fr conftest* fi fi rm -f conftest* fi echo "$ac_t""$vi_cv_int32" 1>&6 if test "$vi_cv_int32" = no; then echo echo "Fatal error: no signed, 32-bit integral type." exit 1 fi if test "$vi_cv_int32" != yes; then int32_decl="typedef $vi_cv_int32 int32_t;" fi trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 DEFS=-DHAVE_CONFIG_H # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "Makefile port.h:port.h.in pathnames.h:pathnames.h.in recover:recover.in config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@CC@%$CC%g s%@OPTFLAG@%$OPTFLAG%g s%@no_op_OPTFLAG@%$no_op_OPTFLAG%g s%@vi_cv_path_shell@%$vi_cv_path_shell%g s%@vi_cv_path_sendmail@%$vi_cv_path_sendmail%g s%@vi_cv_path_perl@%$vi_cv_path_perl%g s%@vi_cv_path_preserve@%$vi_cv_path_preserve%g s%@vi_cv_path_chmod@%$vi_cv_path_chmod%g s%@vi_cv_path_cp@%$vi_cv_path_cp%g s%@vi_cv_path_ln@%$vi_cv_path_ln%g s%@vi_cv_path_mkdir@%$vi_cv_path_mkdir%g s%@vi_cv_path_rm@%$vi_cv_path_rm%g s%@vi_cv_path_strip@%$vi_cv_path_strip%g s%@CPP@%$CPP%g s%@XINCS@%$XINCS%g s%@shrpenv@%$shrpenv%g s%@vi_cv_perllib@%$vi_cv_perllib%g s%@cobjs@%$cobjs%g s%@LIBOBJS@%$LIBOBJS%g s%@u_char_decl@%$u_char_decl%g s%@u_short_decl@%$u_short_decl%g s%@u_int_decl@%$u_int_decl%g s%@u_long_decl@%$u_long_decl%g s%@u_int8_decl@%$u_int8_decl%g s%@u_int16_decl@%$u_int16_decl%g s%@int16_decl@%$int16_decl%g s%@u_int32_decl@%$u_int32_decl%g s%@int32_decl@%$int32_decl%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in EOF # Transform confdefs.h into a sed script conftest.vals that substitutes # the proper values into config.h.in to produce config.h. And first: # Protect against being on the right side of a sed subst in config.status. # Protect against being in an unquoted here document in config.status. rm -f conftest.vals cat > conftest.hdr <<\EOF s/[\\&%]/\\&/g s%[\\$`]%\\&%g s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp s%ac_d%ac_u%gp s%ac_u%ac_e%gp EOF sed -n -f conftest.hdr confdefs.h > conftest.vals rm -f conftest.hdr # This sed command replaces #undef with comments. This is necessary, for # example, in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. cat >> conftest.vals <<\EOF s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% EOF # Break up conftest.vals because some shells have a limit on # the size of here documents, and old seds have small limits too. rm -f conftest.tail while : do ac_lines=`grep -c . conftest.vals` # grep -c gives empty output for an empty file on some AIX systems. if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi # Write a limited-size here document to conftest.frag. echo ' cat > conftest.frag <> $CONFIG_STATUS sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS echo 'CEOF sed -f conftest.frag conftest.in > conftest.out rm -f conftest.in mv conftest.out conftest.in ' >> $CONFIG_STATUS sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail rm -f conftest.vals mv conftest.tail conftest.vals done rm -f conftest.vals cat >> $CONFIG_STATUS <<\EOF rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF echo timestamp > stamp-h exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 vigor-0.016.orig/build/tags0100644000076400007640000022063207103707251014255 0ustar cjw44cjw44ABSMARK1 ../common/mark.h /^#define ABSMARK1 '\\'' \/* Absolute mark name. */ ABSMARK2 ../common/mark.h /^#define ABSMARK2 '`' \/* Absolute mark name. *\/$/ ADDITIONAL_CHARACTERS ../common/key.c /^#define ADDITIONAL_CHARACTERS 4$/ ADD_SPACE_GOTO ../common/mem.h /^#define ADD_SPACE_GOTO(sp, bp, blen, nlen) { \\/ ADD_SPACE_RET ../common/mem.h /^#define ADD_SPACE_RET(sp, bp, blen, nlen) { \\$/ AGV_ALL ../ex/ex.h /^#define AGV_ALL (AGV_AT | AGV_AT_NORANGE | AGV_GL/ AGV_AT ../ex/ex.h /^#define AGV_AT 0x01 \/* @ buffer execution. *\/$/ AGV_AT_NORANGE ../ex/ex.h /^#define AGV_AT_NORANGE 0x02 \/* @ buffer executio/ AGV_GLOBAL ../ex/ex.h /^#define AGV_GLOBAL 0x04 \/* global command. *\/$/ AGV_V ../ex/ex.h /^#define AGV_V 0x08 \/* v command. *\/$/ ARG ../ex/ex_display.c /^#define ARG "buffers"$/ ARSIZE ../common/msg.c /^#define ARSIZE(a) sizeof(a) \/ sizeof (*a)$/ A_ALLOCATED ../common/args.h /^#define A_ALLOCATED 0x01 \/* If allocated space. */ BINC_GOTO ../common/mem.h /^#define BINC_GOTO(sp, lp, llen, nlen) { \\$/ BINC_RET ../common/mem.h /^#define BINC_RET(sp, lp, llen, nlen) { \\$/ BITS ../common/key.c /^#define BITS (sizeof(CHAR_T) * 8)$/ BUILD ../ex/ex_subst.c /^#define BUILD(sp, l, len) { \\$/ CALLOC ../common/mem.h /^#define CALLOC(sp, p, cast, nmemb, size) { \\$/ CALLOC_GOTO ../common/mem.h /^#define CALLOC_GOTO(sp, p, cast, nmemb, size) { / CALLOC_NOMSG ../common/mem.h /^#define CALLOC_NOMSG(sp, p, cast, nmemb, size) { / CALLOC_RET ../common/mem.h /^#define CALLOC_RET(sp, p, cast, nmemb, size) { / CBNAME ../common/cut.h /^#define CBNAME(sp, cbp, nch) { \\$/ CB_LMODE ../common/cut.h /^#define CB_LMODE 0x01 \/* Cut was in line mode. */ CHK_INTR ../vi/v_txt.c /^#define CHK_INTR \\$/ CHLEN ../vi/vs_relative.c /^#define CHLEN(val) (ch = *(u_char *)p++) == '\\t' / CH_ABBREVIATED ../common/key.h /^#define CH_ABBREVIATED 0x01 \/* Character is from/ CH_BSEARCH ../common/key.h /^#define CH_BSEARCH '?' \/* Backward search prompt/ CH_CURSOR ../common/key.h /^#define CH_CURSOR ' ' \/* Cursor character. *\/$/ CH_ENDMARK ../common/key.h /^#define CH_ENDMARK '$' \/* End of a range. *\/$/ CH_EXPROMPT ../common/key.h /^#define CH_EXPROMPT ':' \/* Ex prompt. *\/$/ CH_FSEARCH ../common/key.h /^#define CH_FSEARCH '\/' \/* Forward search prompt/ CH_HEX ../common/key.h /^#define CH_HEX '\\030' \/* Leading hex character/ CH_LITERAL ../common/key.h /^#define CH_LITERAL '\\026' \/* ASCII ^V. *\/$/ CH_MAPPED ../common/key.h /^#define CH_MAPPED 0x02 \/* Character is from a ma/ CH_NO ../common/key.h /^#define CH_NO 'n' \/* No. *\/$/ CH_NOMAP ../common/key.h /^#define CH_NOMAP 0x04 \/* Do not map the characte/ CH_NOT_DIGIT ../common/key.h /^#define CH_NOT_DIGIT 'a' \/* A non-isdigit() char/ CH_QUIT ../common/key.h /^#define CH_QUIT 'q' \/* Quit. *\/$/ CH_QUOTED ../common/key.h /^#define CH_QUOTED 0x08 \/* Character is already q/ CH_YES ../common/key.h /^#define CH_YES 'y' \/* Yes. *\/$/ CLEAR_EX_CMD ../ex/ex.h /^#define CLEAR_EX_CMD(cmdp) { \\$/ CLEAR_EX_PARSER ../ex/ex.h /^#define CLEAR_EX_PARSER(cmdp) \\$/ CLP ../cl/cl.h /^#define CLP(sp) ((CL_PRIVATE *)((sp)->gp->cl_priv/ CLR_INTERRUPT ../common/key.h /^#define CLR_INTERRUPT(sp) \\$/ CL_IN_EX ../cl/cl.h /^#define CL_IN_EX 0x0001 \/* Currently running ex. / CL_RENAME ../cl/cl.h /^#define CL_RENAME 0x0002 \/* X11 xterm icon\/windo/ CL_RENAME_OK ../cl/cl.h /^#define CL_RENAME_OK 0x0004 \/* User wants the win/ CL_SCR_EX_INIT ../cl/cl.h /^#define CL_SCR_EX_INIT 0x0008 \/* Ex screen initia/ CL_SCR_VI_INIT ../cl/cl.h /^#define CL_SCR_VI_INIT 0x0010 \/* Vi screen initia/ CL_SIGHUP ../cl/cl.h /^#define CL_SIGHUP 0x0020 \/* SIGHUP arrived. *\/$/ CL_SIGINT ../cl/cl.h /^#define CL_SIGINT 0x0040 \/* SIGINT arrived. *\/$/ CL_SIGTERM ../cl/cl.h /^#define CL_SIGTERM 0x0080 \/* SIGTERM arrived. *\// CL_SIGWINCH ../cl/cl.h /^#define CL_SIGWINCH 0x0100 \/* SIGWINCH arrived. */ CL_STDIN_TTY ../cl/cl.h /^#define CL_STDIN_TTY 0x0200 \/* Talking to a termi/ CNO ../vi/vs_refresh.c /^#define CNO sp->cno \/* Current file column. */ COL_OFF ../common/util.h /^#define COL_OFF(c, stop) ((stop) - ((c) % (stop)))/ CSCOPE_CMD_FMT ../ex/ex_cscope.c /^#define CSCOPE_CMD_FMT "cd '%s' && exec cscope -d/ CSCOPE_DBFILE ../ex/ex_cscope.c /^#define CSCOPE_DBFILE "cscope.out"$/ CSCOPE_NLINES_FMT ../ex/ex_cscope.c /^#define CSCOPE_NLINES_FMT "cscope: %d lines%1[\\n]/ CSCOPE_PATHS ../ex/ex_cscope.c /^#define CSCOPE_PATHS "cscope.tpath"$/ CSCOPE_PROMPT ../ex/ex_cscope.c /^#define CSCOPE_PROMPT ">> "$/ CSCOPE_QUERIES ../ex/ex_cscope.c /^#define CSCOPE_QUERIES "sgdct efi"$/ CSCOPE_RE_SPACE ../ex/ex_subst.c /^#define CSCOPE_RE_SPACE "([ \\t]|\/\\\\*([^*]|\\/ CS_EMP ../vi/vi.h /^#define CS_EMP 1 \/* Empty line. *\/$/ CS_EOF ../vi/vi.h /^#define CS_EOF 2 \/* End-of-file. *\/$/ CS_EOL ../vi/vi.h /^#define CS_EOL 3 \/* End-of-line. *\/$/ CS_SOF ../vi/vi.h /^#define CS_SOF 4 \/* Start-of-file. *\/$/ CUT_LINEMODE ../common/cut.h /^#define CUT_LINEMODE 0x01 \/* Cut in line mode. */ CUT_NUMOPT ../common/cut.h /^#define CUT_NUMOPT 0x02 \/* Numeric buffer: optio/ CUT_NUMREQ ../common/cut.h /^#define CUT_NUMREQ 0x04 \/* Numeric buffer: requi/ DBG_FATAL ../common/exf.h /^#define DBG_FATAL 0x001 \/* If DNE, error message./ DBG_NOCACHE ../common/exf.h /^#define DBG_NOCACHE 0x002 \/* Ignore the front-end/ DEC ../vi/v_increment.c /^#define DEC 0$/ DEFAULT_NOPRINT ../common/gs.h /^#define DEFAULT_NOPRINT '\\1' \/* Emergency non-p/ DIVIDESTR ../vi/vs_msg.c /^#define DIVIDESTR "+=+=+=+=+=+=+=+"$/ DOT ../vi/vi.c /^#define DOT (&VIP(sp)->sdot)$/ DOTMOTION ../vi/vi.c /^#define DOTMOTION (&VIP(sp)->sdotmotion)$/ EC_INTERRUPT ../common/key.h /^#define EC_INTERRUPT 0x001 \/* Checking for inter/ EC_MAPCOMMAND ../common/key.h /^#define EC_MAPCOMMAND 0x002 \/* Apply the command/ EC_MAPINPUT ../common/key.h /^#define EC_MAPINPUT 0x004 \/* Apply the input map/ EC_MAPNODIGIT ../common/key.h /^#define EC_MAPNODIGIT 0x008 \/* Return to a digit/ EC_QUOTED ../common/key.h /^#define EC_QUOTED 0x010 \/* Try to quote next cha/ EC_RAW ../common/key.h /^#define EC_RAW 0x020 \/* Any next character. XXX/ EC_TIMEOUT ../common/key.h /^#define EC_TIMEOUT 0x040 \/* Timeout to next char/ ENDMESSAGE ../tcl_api/tcl.c /^#define ENDMESSAGE \\$/ ENTIRE_LINE ../common/cut.c /^#define ENTIRE_LINE 0$/ EQUAL ../ex/ex_tag.c /^#define EQUAL 0$/ EXCMD_RUNNING ../common/gs.h /^#define EXCMD_RUNNING(gp) ((gp)->ecq.lh_first->cle/ EXP ../ex/ex.h /^#define EXP(sp) ((EX_PRIVATE *)((sp)->ex_private))/ EXP_CSCINIT ../ex/ex.h /^#define EXP_CSCINIT 0x01 \/* Cscope initialized. / E_ABSMARK ../ex/ex.h /^#define E_ABSMARK 0x00040000 \/* Set the absolute / E_ADDR1 ../ex/ex.h /^#define E_ADDR1 0x00000001 \/* One address. *\/$/ E_ADDR2 ../ex/ex.h /^#define E_ADDR2 0x00000002 \/* Two addresses. *\// E_ADDR2_ALL ../ex/ex.h /^#define E_ADDR2_ALL 0x00000004 \/* Zero\/two addre/ E_ADDR2_NONE ../ex/ex.h /^#define E_ADDR2_NONE 0x00000008 \/* Zero\/two addr/ E_ADDR_DEF ../ex/ex.h /^#define E_ADDR_DEF 0x00080000 \/* Default addresse/ E_ADDR_ZERO ../ex/ex.h /^#define E_ADDR_ZERO 0x00000010 \/* 0 is a legal ad/ E_ADDR_ZERODEF ../ex/ex.h /^#define E_ADDR_ZERODEF 0x00000020 \/* 0 is default/ E_AUTOPRINT ../ex/ex.h /^#define E_AUTOPRINT 0x00000040 \/* Command always / E_BLIGNORE ../ex/ex.h /^#define E_BLIGNORE 0x00000800 \/* Ignore blank lin/ E_CLRFLAG ../ex/ex.h /^#define E_CLRFLAG 0x00000080 \/* Clear the print (/ E_C_BUFFER ../ex/ex.h /^#define E_C_BUFFER 0x00001 \/* Buffer name specif/ E_C_CARAT ../ex/ex.h /^#define E_C_CARAT 0x00002 \/* ^ flag. *\/$/ E_C_COUNT ../ex/ex.h /^#define E_C_COUNT 0x00004 \/* Count specified. */ E_C_COUNT_NEG ../ex/ex.h /^#define E_C_COUNT_NEG 0x00008 \/* Count was signe/ E_C_COUNT_POS ../ex/ex.h /^#define E_C_COUNT_POS 0x00010 \/* Count was signe/ E_C_DASH ../ex/ex.h /^#define E_C_DASH 0x00020 \/* - flag. *\/$/ E_C_DOT ../ex/ex.h /^#define E_C_DOT 0x00040 \/* . flag. *\/$/ E_C_EQUAL ../ex/ex.h /^#define E_C_EQUAL 0x00080 \/* = flag. *\/$/ E_C_FORCE ../ex/ex.h /^#define E_C_FORCE 0x00100 \/* ! flag. *\/$/ E_C_HASH ../ex/ex.h /^#define E_C_HASH 0x00200 \/* # flag. *\/$/ E_C_LIST ../ex/ex.h /^#define E_C_LIST 0x00400 \/* l flag. *\/$/ E_C_PLUS ../ex/ex.h /^#define E_C_PLUS 0x00800 \/* + flag. *\/$/ E_C_PRINT ../ex/ex.h /^#define E_C_PRINT 0x01000 \/* p flag. *\/$/ E_DELTA ../ex/ex.h /^#define E_DELTA 0x00100000 \/* Search address wit/ E_MODIFY ../ex/ex.h /^#define E_MODIFY 0x00200000 \/* File name expansio/ E_MOVETOEND ../ex/ex.h /^#define E_MOVETOEND 0x00400000 \/* Move to the end/ E_NAMEDISCARD ../ex/ex.h /^#define E_NAMEDISCARD 0x00001000 \/* Free\/discard/ E_NEWLINE ../ex/ex.h /^#define E_NEWLINE 0x00800000 \/* Found ending flags, f)$/ F_DEVSET ../common/exf.h /^#define F_DEVSET 0x001 \/* mdev\/minode fields in/ F_FIRSTMODIFY ../common/exf.h /^#define F_FIRSTMODIFY 0x002 \/* File not yet modi/ F_INIT ../common/util.h /^#define F_INIT(p, f) FL_INIT((p)->flags, f) \/* St/ F_ISSET ../common/util.h /^#define F_ISSET(p, f) FL_ISSET((p)->flags, f)$/ F_MODIFIED ../common/exf.h /^#define F_MODIFIED 0x004 \/* File is currently di/ F_MULTILOCK ../common/exf.h /^#define F_MULTILOCK 0x008 \/* Multiple processes / F_NOLOG ../common/exf.h /^#define F_NOLOG 0x010 \/* Logging turned off. */ F_RCV_NORM ../common/exf.h /^#define F_RCV_NORM 0x020 \/* Don't delete recover/ F_RCV_ON ../common/exf.h /^#define F_RCV_ON 0x040 \/* Recovery is possible. / F_SET ../common/util.h /^#define F_SET(p, f) FL_SET((p)->flags, f)$/ F_UNDO ../common/exf.h /^#define F_UNDO 0x080 \/* No change since last un/ GCLP ../cl/cl.h /^#define GCLP(gp) ((CL_PRIVATE *)gp->cl_private)$/ GET_SPACE_GOTO ../common/mem.h /^#define GET_SPACE_GOTO(sp, bp, blen, nlen) { \\/ GET_SPACE_RET ../common/mem.h /^#define GET_SPACE_RET(sp, bp, blen, nlen) { \\$/ GLOBAL_CLP ../cl/cl_main.c /^#define GLOBAL_CLP \\$/ GLOBAL_TKP ../tk/tk_main.c /^#define GLOBAL_TKP \\$/ GO_COLUMNS ../common/gs.h /^#define GO_COLUMNS 0 \/* Global options: columns./ GO_LINES ../common/gs.h /^#define GO_LINES 1 \/* Global options: lines. *\// GO_SECURE ../common/gs.h /^#define GO_SECURE 2 \/* Global options: secure. */ GO_TERM ../common/gs.h /^#define GO_TERM 3 \/* Global options: terminal t/ GREATER ../ex/ex_tag.c /^#define GREATER 1$/ GTKP ../tk/tki.h /^#define GTKP(gp) ((TK_PRIVATE *)gp->tk_private)$/ G_ABBREV ../common/gs.h /^#define G_ABBREV 0x0001 \/* If have abbreviations/ G_BELLSCHED ../common/gs.h /^#define G_BELLSCHED 0x0002 \/* Bell scheduled. */ G_INTERRUPTED ../common/gs.h /^#define G_INTERRUPTED 0x0004 \/* Interrupted. *\// G_RECOVER_SET ../common/gs.h /^#define G_RECOVER_SET 0x0008 \/* Recover system i/ G_SCRIPTED ../common/gs.h /^#define G_SCRIPTED 0x0010 \/* Ex script session. / G_SCRWIN ../common/gs.h /^#define G_SCRWIN 0x0020 \/* Scripting windows run/ G_SNAPSHOT ../common/gs.h /^#define G_SNAPSHOT 0x0040 \/* Always snapshot fil/ G_SRESTART ../common/gs.h /^#define G_SRESTART 0x0080 \/* Screen restarted. */ G_TMP_INUSE ../common/gs.h /^#define G_TMP_INUSE 0x0100 \/* Temporary buffer i/ HALFSCREEN ../vi/vi.h /^#define HALFSCREEN(sp) \/* Half text screen. */ HALFTEXT ../vi/vi.h /^#define HALFTEXT(sp) \/* Half text. *\/ \\$/ HANDLE_WEIRDNESS ../vi/vs_smap.c /^#define HANDLE_WEIRDNESS(cnt) { \\$/ HEXC ../vi/v_increment.c /^#define HEXC 2$/ HEXL ../vi/v_increment.c /^#define HEXL 3$/ HMAP ../vi/vi.h /^#define HMAP _HMAP(sp)$/ INCREMENT ../ex/ex_argv.c /^#define INCREMENT 20$/ INDX_HUP ../cl/cl.h /^#define INDX_HUP 0$/ INDX_INT ../cl/cl.h /^#define INDX_INT 1$/ INDX_MAX ../cl/cl.h /^#define INDX_MAX 4 \/* Original signal information/ INDX_TERM ../cl/cl.h /^#define INDX_TERM 2$/ INDX_WINCH ../cl/cl.h /^#define INDX_WINCH 3$/ INITMESSAGE ../tcl_api/tcl.c /^#define INITMESSAGE \\$/ INTERRUPTED ../common/key.h /^#define INTERRUPTED(sp) \\$/ INTERRUPT_CHECK ../common/key.h /^#define INTERRUPT_CHECK 100$/ INTEXT_CHECK ../vi/v_paragraph.c /^#define INTEXT_CHECK { \\$/ ISCMD ../vi/vi.h /^#define ISCMD(p, key) ((p) == &vikeys[key])$/ ISMOTION ../vi/vi.h /^#define ISMOTION(vp) (vp->rkp != NULL && F_ISSET(v/ IS_ESCAPE ../ex/ex.h /^#define IS_ESCAPE(sp, cmdp, ch) \\$/ IS_ONELINE ../vi/vi.h /^#define IS_ONELINE(sp) ((sp)->rows == 1)$/ IS_RESTART ../vi/v_txt.c /^#define IS_RESTART 0x01 \/* Reset the incremental / IS_RUNNING ../vi/v_txt.c /^#define IS_RUNNING 0x02 \/* Incremental search tur/ IS_SMALL ../vi/vi.h /^#define IS_SMALL(sp) ((sp)->t_minrows != (sp)->t_m/ IS_SPLIT ../vi/vi.h /^#define IS_SPLIT(sp) \\$/ KEY ../vi/vi.c /^#define KEY(key, ec_flags) { \\$/ KEYS_WAITING ../common/key.h /^#define KEYS_WAITING(sp) ((sp)->gp->i_cnt != 0)$/ KEY_LEN ../common/gs.h /^#define KEY_LEN(sp, ch) \\$/ KEY_NAME ../common/gs.h /^#define KEY_NAME(sp, ch) \\$/ KEY_VAL ../common/gs.h /^#define KEY_VAL(sp, ch) \\$/ LASTLINE ../vi/vi.h /^#define LASTLINE(sp) \\$/ LESS ../ex/ex_tag.c /^#define LESS (-1)$/ LF_CLR ../common/util.h /^#define LF_CLR(f) FL_CLR(flags, f)$/ LF_INIT ../common/util.h /^#define LF_INIT(f) FL_INIT(flags, f) \/* Local var/ LF_ISSET ../common/util.h /^#define LF_ISSET(f) FL_ISSET(flags, f)$/ LF_SET ../common/util.h /^#define LF_SET(f) FL_SET(flags, f)$/ LINE_RESOLVE ../vi/v_txt.c /^#define LINE_RESOLVE { \\$/ LNO ../vi/vs_refresh.c /^#define LNO sp->lno \/* Current file line. *\/$/ LOG_CORRECT ../vi/v_itxt.c /^#define LOG_CORRECT { \\$/ LOG_CURSOR_END ../common/log.h /^#define LOG_CURSOR_END 2$/ LOG_CURSOR_INIT ../common/log.h /^#define LOG_CURSOR_INIT 1$/ LOG_ERR ../common/log.c /^#define LOG_ERR { \\$/ LOG_LINE_APPEND ../common/log.h /^#define LOG_LINE_APPEND 3$/ LOG_LINE_DELETE ../common/log.h /^#define LOG_LINE_DELETE 4$/ LOG_LINE_INSERT ../common/log.h /^#define LOG_LINE_INSERT 5$/ LOG_LINE_RESET_B ../common/log.h /^#define LOG_LINE_RESET_B 7$/ LOG_LINE_RESET_F ../common/log.h /^#define LOG_LINE_RESET_F 6$/ LOG_MARK ../common/log.h /^#define LOG_MARK 8$/ LOG_NOTYPE ../common/log.h /^#define LOG_NOTYPE 0$/ L_ADDED ../common/screen.h /^#define L_ADDED 0 \/* Added lines. *\/$/ L_CHANGED ../common/screen.h /^#define L_CHANGED 1 \/* Changed lines. *\/$/ L_DELETED ../common/screen.h /^#define L_DELETED 2 \/* Deleted lines. *\/$/ L_JOINED ../common/screen.h /^#define L_JOINED 3 \/* Joined lines. *\/$/ L_MOVED ../common/screen.h /^#define L_MOVED 4 \/* Moved lines. *\/$/ L_NAME ../ex/ex_tag.c /^#define L_NAME 30 \/* Name. *\/$/ L_SHIFT ../common/screen.h /^#define L_SHIFT 5 \/* Shift lines. *\/$/ L_SLOP ../ex/ex_tag.c /^#define L_SLOP 4 \/* Leading number plus trailin/ L_SPACE ../ex/ex_tag.c /^#define L_SPACE 5 \/* Spaces after name, before / L_TAG ../ex/ex_tag.c /^#define L_TAG 20 \/* Tag. *\/$/ L_YANKED ../common/screen.h /^#define L_YANKED 6 \/* Yanked lines. *\/$/ MALLOC ../common/mem.h /^#define MALLOC(sp, p, cast, size) { \\$/ MALLOC_GOTO ../common/mem.h /^#define MALLOC_GOTO(sp, p, cast, size) { \\$/ MALLOC_NOMSG ../common/mem.h /^#define MALLOC_NOMSG(sp, p, cast, size) { \\$/ MALLOC_RET ../common/mem.h /^#define MALLOC_RET(sp, p, cast, size) { \\$/ MAPPED_KEYS_WAITING ../common/key.h /^#define MAPPED_KEYS_WAITING(sp) \\$/ MAP_FILE ../ex/ex_tag.c /^#define MAP_FILE 0$/ MARK_DELETED ../common/mark.h /^#define MARK_DELETED 0x01 \/* Mark was deleted. */ MARK_USERSET ../common/mark.h /^#define MARK_USERSET 0x02 \/* User set this mark./ MAXCMDNAMELEN ../ex/ex.h /^#define MAXCMDNAMELEN 12 \/* Longest command name/ MAXHOSTNAMELEN ../common/recover.c /^#define MAXHOSTNAMELEN 1024$/ MAXIMUM_SCREEN_COLS ../common/options_f.c /^#define MAXIMUM_SCREEN_COLS 500$/ MAXIMUM_SCREEN_ROWS ../common/options_f.c /^#define MAXIMUM_SCREEN_ROWS 500$/ MAXNUM ../common/msg.c /^#define MAXNUM 25$/ MAXVIKEY ../vi/vi.h /^#define MAXVIKEY 126 \/* List of vi commands. *\// MAX_ABBREVIATION_EXPANSION ../vi/v_txt.c /^#define MAX_ABBREVIATION_EXPANSION 256$/ MAX_BIT_SEQ ../common/gs.h /^#define MAX_BIT_SEQ 128 \/* Max + 1 fast check ch/ MAX_CHARACTER_COLUMNS ../common/key.h /^#define MAX_CHARACTER_COLUMNS 4$/ MAX_CHAR_T ../common/key.h /^#define MAX_CHAR_T 0xff$/ MAX_FAST_KEY ../common/gs.h /^#define MAX_FAST_KEY 254 \/* Max fast check chara/ MEGABYTE ../ex/ex_source.c /^#define MEGABYTE 1048576$/ MEMMOVE ../common/mem.h /^#define MEMMOVE(p, t, len) memmove(p, t, (len) * s/ MEMSET ../common/mem.h /^#define MEMSET(p, value, len) memset(p, value, (le/ MINIMUM_SCREEN_COLS ../common/screen.h /^#define MINIMUM_SCREEN_COLS 20$/ MINIMUM_SCREEN_ROWS ../common/screen.h /^#define MINIMUM_SCREEN_ROWS 1$/ MINREAD ../ex/ex_script.c /^#define MINREAD 1024$/ MODESIZE ../vi/vs_refresh.c /^#define MODESIZE 9$/ MSTAT_SHOWLAST ../common/msg.h /^#define MSTAT_SHOWLAST 0x01 \/* Show the line numb/ MSTAT_TRUNCATE ../common/msg.h /^#define MSTAT_TRUNCATE 0x02 \/* Truncate the file / Mcl_main ../cl/cl_main.c /^main(argc, argv)$/ Mtk_main ../tk/tk_main.c /^main(argc, argv)$/ NADD_SLONG ../common/util.h /^#define NADD_SLONG(sp, v1, v2) \\$/ NADD_USLONG ../common/util.h /^#define NADD_USLONG(sp, v1, v2) \\$/ NEEDFILE ../ex/ex.h /^#define NEEDFILE(sp, cmdp) { \\$/ NEEDNEWLINE ../ex/ex_subst.c /^#define NEEDNEWLINE(sp) { \\$/ NEEDSP ../ex/ex_subst.c /^#define NEEDSP(sp, len, pnt) { \\$/ NIL ../perl_api/perlsfio.c /^#define NIL(type) ((type)0)$/ NNFITS ../common/util.h /^#define NNFITS(min, cur, add) \\$/ NPFITS ../common/util.h /^#define NPFITS(max, cur, add) \\$/ OCNO ../vi/vs_refresh.c /^#define OCNO vip->ocno \/* Remembered file column/ OCTAL ../vi/v_increment.c /^#define OCTAL 4$/ OG_CLR ../common/options.h /^#define OG_CLR(gp, o) ((gp)->opts[(o)].o_cur.val)/ OG_D_STR ../common/options.h /^#define OG_D_STR(gp, o) ((gp)->opts[(o)].o_def.st/ OG_D_VAL ../common/options.h /^#define OG_D_VAL(gp, o) ((gp)->opts[(o)].o_def.va/ OG_ISSET ../common/options.h /^#define OG_ISSET(gp, o) OG_VAL(gp, o)$/ OG_SET ../common/options.h /^#define OG_SET(gp, o) ((gp)->opts[(o)].o_cur.val)/ OG_STR ../common/options.h /^#define OG_STR(gp, o) ((gp)->opts[(o)].o_cur.str)/ OG_VAL ../common/options.h /^#define OG_VAL(gp, o) ((gp)->opts[(o)].o_cur.val)/ OI ../common/options.c /^#define OI(indx, str) { \\$/ OLNO ../vi/vs_refresh.c /^#define OLNO vip->olno \/* Remembered file line. / ONE_FOR_EOF ../cl/cl_read.c /^#define ONE_FOR_EOF 1$/ OOBLNO ../common/mark.h /^#define OOBLNO 0 \/* Out-of-band line number. */ OPT_ADISP ../common/options.h /^#define OPT_ADISP 0x001 \/* Always display the op/ OPT_ALWAYS ../common/options.h /^#define OPT_ALWAYS 0x002 \/* Always call the supp/ OPT_GLOBAL ../common/options.h /^#define OPT_GLOBAL 0x01 \/* Option is global. *\// OPT_NDISP ../common/options.h /^#define OPT_NDISP 0x004 \/* Never display the opt/ OPT_NOSAVE ../common/options.h /^#define OPT_NOSAVE 0x008 \/* Mkexrc command doesn/ OPT_NOSET ../common/options.h /^#define OPT_NOSET 0x010 \/* Option may not be set/ OPT_NOUNSET ../common/options.h /^#define OPT_NOUNSET 0x020 \/* Option may not be u/ OPT_NOZERO ../common/options.h /^#define OPT_NOZERO 0x040 \/* Option may not be se/ OPT_SELECTED ../common/options.h /^#define OPT_SELECTED 0x02 \/* Selected for displa/ OS_DEF ../common/options.h /^#define OS_DEF 0x01 \/* Set the default value. */ OS_NOFREE ../common/options.h /^#define OS_NOFREE 0x02 \/* Don't free the old str/ OS_STR ../common/options.h /^#define OS_STR 0x04 \/* Set to string argument. / OS_STRDUP ../common/options.h /^#define OS_STRDUP 0x08 \/* Copy then set to strin/ OUTCH ../ex/ex_subst.c /^#define OUTCH(ch, nltrans) { \\$/ O_CLR ../common/options.h /^#define O_CLR(sp, o) o_set(sp, o, 0, NULL, 0)$/ O_D_CLR ../common/options.h /^#define O_D_CLR(sp, o) o_set(sp, o, OS_DEF, NULL,/ O_D_ISSET ../common/options.h /^#define O_D_ISSET(sp, o) O_D_VAL(sp, o)$/ O_D_SET ../common/options.h /^#define O_D_SET(sp, o) o_set(sp, o, OS_DEF, NULL,/ O_D_STR ../common/options.h /^#define O_D_STR(sp, o) O_V(sp, o, o_def.str)$/ O_D_VAL ../common/options.h /^#define O_D_VAL(sp, o) O_V(sp, o, o_def.val)$/ O_ISSET ../common/options.h /^#define O_ISSET(sp, o) O_VAL(sp, o)$/ O_NUMBER_FMT ../vi/vi.h /^#define O_NUMBER_FMT "%7lu " \/* O_NUMBER format/ O_NUMBER_LENGTH ../vi/vi.h /^#define O_NUMBER_LENGTH 8$/ O_SET ../common/options.h /^#define O_SET(sp, o) o_set(sp, o, 0, NULL, 1)$/ O_STR ../common/options.h /^#define O_STR(sp, o) O_V(sp, o, o_cur.str)$/ O_V ../common/options.h /^#define O_V(sp, o, fld) \\$/ O_VAL ../common/options.h /^#define O_VAL(sp, o) O_V(sp, o, o_cur.val)$/ PROMPTCHAR ../ex/ex.h /^#define PROMPTCHAR ':' \/* Prompt using a colon. / QREM ../common/key.c /^#define QREM(len) { \\$/ RCV_EMAIL ../common/exf.h /^#define RCV_EMAIL 0x01 \/* Send the user email, IF/ RCV_ENDSESSION ../common/exf.h /^#define RCV_ENDSESSION 0x02 \/* End the file sessi/ RCV_PERIOD ../common/exf.h /^#define RCV_PERIOD 120 \/* Sync every two minutes/ RCV_PRESERVE ../common/exf.h /^#define RCV_PRESERVE 0x04 \/* Preserve backup file/ RCV_SNAPSHOT ../common/exf.h /^#define RCV_SNAPSHOT 0x08 \/* Snapshot the recover/ REALLOC ../common/mem.h /^#define REALLOC(sp, p, cast, size) { \\$/ REM ../common/msg.c /^#define REM (blen - mlen)$/ RE_C_CSCOPE ../common/screen.h /^#define RE_C_CSCOPE 0x0001 \/* Compile cscope pat/ RE_C_SEARCH ../common/screen.h /^#define RE_C_SEARCH 0x0002 \/* Compile search rep/ RE_C_SILENT ../common/screen.h /^#define RE_C_SILENT 0x0004 \/* No error messages./ RE_C_SUBST ../common/screen.h /^#define RE_C_SUBST 0x0008 \/* Compile substitute / RE_C_TAG ../common/screen.h /^#define RE_C_TAG 0x0010 \/* Compile ctag pattern./ RE_WSTART ../common/screen.h /^#define RE_WSTART "[[:<:]]" \/* Ex\/vi: not-in-wor/ RE_WSTOP ../common/screen.h /^#define RE_WSTOP "[[:>:]]"$/ RLNO ../cl/cl.h /^#define RLNO(sp, lno) (sp)->woff + (lno)$/ SCNO ../vi/vs_refresh.c /^#define SCNO vip->sc_col \/* Current screen colum/ SCREEN_COLS ../vi/vi.h /^#define SCREEN_COLS(sp) \/* Screen columns. *\// SC_ARGNOFREE ../common/screen.h /^#define SC_ARGNOFREE 0x00002000 \/* Argument list / SC_ARGRECOVER ../common/screen.h /^#define SC_ARGRECOVER 0x00004000 \/* Argument list/ SC_AT_SET ../common/screen.h /^#define SC_AT_SET 0x00008000 \/* Last at buffer se/ SC_COMEDIT ../common/screen.h /^#define SC_COMEDIT 0x00010000 \/* Colon command-li/ SC_EX ../common/screen.h /^#define SC_EX 0x00000001 \/* Ex editor. *\/$/ SC_EXIT ../common/screen.h /^#define SC_EXIT 0x00000200 \/* Exiting (not force/ SC_EXIT_FORCE ../common/screen.h /^#define SC_EXIT_FORCE 0x00000400 \/* Exiting (forc/ SC_EX_GLOBAL ../common/screen.h /^#define SC_EX_GLOBAL 0x00020000 \/* Ex: executing / SC_EX_SILENT ../common/screen.h /^#define SC_EX_SILENT 0x00040000 \/* Ex: batch scri/ SC_EX_WAIT_NO ../common/screen.h /^#define SC_EX_WAIT_NO 0x00080000 \/* Ex: don't wai/ SC_EX_WAIT_YES ../common/screen.h /^#define SC_EX_WAIT_YES 0x00100000 \/* Ex: do wa/ SC_FSWITCH ../common/screen.h /^#define SC_FSWITCH 0x00000800 \/* Switch underlyin/ SC_READONLY ../common/screen.h /^#define SC_READONLY 0x00200000 \/* Persistent read/ SC_RE_SEARCH ../common/screen.h /^#define SC_RE_SEARCH 0x00400000 \/* Search RE has / SC_RE_SUBST ../common/screen.h /^#define SC_RE_SUBST 0x00800000 \/* Substitute RE h/ SC_SCRIPT ../common/screen.h /^#define SC_SCRIPT 0x01000000 \/* Shell script wind/ SC_SCR_CENTER ../common/screen.h /^#define SC_SCR_CENTER 0x00000080 \/* Center the li/ SC_SCR_EX ../common/screen.h /^#define SC_SCR_EX 0x00000004 \/* Screen is in ex m/ SC_SCR_EXWROTE ../common/screen.h /^#define SC_SCR_EXWROTE 0x00000010 \/* Ex overwrite/ SC_SCR_REDRAW ../common/screen.h /^#define SC_SCR_REDRAW 0x00000040 \/* Refresh. *\/$/ SC_SCR_REFORMAT ../common/screen.h /^#define SC_SCR_REFORMAT 0x00000020 \/* Reformat (r/ SC_SCR_TOP ../common/screen.h /^#define SC_SCR_TOP 0x00000100 \/* Top the line if / SC_SCR_VI ../common/screen.h /^#define SC_SCR_VI 0x00000008 \/* Screen is in vi m/ SC_SSWITCH ../common/screen.h /^#define SC_SSWITCH 0x00001000 \/* Switch screens. / SC_STATUS ../common/screen.h /^#define SC_STATUS 0x02000000 \/* Welcome message. / SC_STATUS_CNT ../common/screen.h /^#define SC_STATUS_CNT 0x04000000 \/* Welcome messa/ SC_TINPUT ../common/screen.h /^#define SC_TINPUT 0x08000000 \/* Doing text input./ SC_TINPUT_INFO ../common/screen.h /^#define SC_TINPUT_INFO 0x10000000 \/* Doing text i/ SC_VI ../common/screen.h /^#define SC_VI 0x00000002 \/* Vi editor. *\/$/ SDEC ../vi/v_increment.c /^#define SDEC 1$/ SEARCH_CSCOPE ../common/screen.h /^#define SEARCH_CSCOPE 0x0001 \/* Search for a csc/ SEARCH_EOL ../common/screen.h /^#define SEARCH_EOL 0x0002 \/* Offset past EOL is / SEARCH_FILE ../common/screen.h /^#define SEARCH_FILE 0x0004 \/* Search the entire / SEARCH_INCR ../common/screen.h /^#define SEARCH_INCR 0x0008 \/* Search incremental/ SEARCH_MSG ../common/screen.h /^#define SEARCH_MSG 0x0010 \/* Display search mess/ SEARCH_PARSE ../common/screen.h /^#define SEARCH_PARSE 0x0020 \/* Parse the search / SEARCH_SET ../common/screen.h /^#define SEARCH_SET 0x0040 \/* Set search directio/ SEARCH_TAG ../common/screen.h /^#define SEARCH_TAG 0x0080 \/* Search for a tag pa/ SEARCH_WMSG ../common/screen.h /^#define SEARCH_WMSG 0x0100 \/* Display search-wra/ SEQ_FUNCMAP ../common/seq.h /^#define SEQ_FUNCMAP 0x01 \/* If unresolved functi/ SEQ_NOOVERWRITE ../common/seq.h /^#define SEQ_NOOVERWRITE 0x02 \/* Don't replace ex/ SEQ_SCREEN ../common/seq.h /^#define SEQ_SCREEN 0x04 \/* If screen specific. */ SEQ_USERDEF ../common/seq.h /^#define SEQ_USERDEF 0x08 \/* If user defined. *\// SETSIG ../tk/tk_main.c /^#define SETSIG(signal, handler, off) { \\$/ SHELLECHO ../ex/ex_argv.c /^#define SHELLECHO "echo "$/ SHELLOFFSET ../ex/ex_argv.c /^#define SHELLOFFSET (sizeof(SHELLECHO) - 1)$/ SHIFT ../common/key.c /^#define SHIFT (BITS - BITS % 3)$/ SIGBLOCK ../common/gs.h /^#define SIGBLOCK \\$/ SIGUNBLOCK ../common/gs.h /^#define SIGUNBLOCK \\$/ SINGLE_CHAR_COMMANDS ../ex/ex.c /^#define SINGLE_CHAR_COMMANDS "\\004!#&*<=>@~"$/ SIZE_HMAP ../vi/vi.h /^#define SIZE_HMAP(sp) (VIP(sp)->srows + 1)$/ SKIP_PAST_NEWLINE ../ex/ex_tag.c /^#define SKIP_PAST_NEWLINE(p, back) while (p < back/ SMAP_CACHE ../vi/vi.h /^#define SMAP_CACHE(smp) ((smp)->c_ecsize != 0)$/ SMAP_FLUSH ../vi/vi.h /^#define SMAP_FLUSH(smp) ((smp)->c_ecsize = 0)$/ STANDARD_TAB ../common/key.h /^#define STANDARD_TAB 6$/ SUB_FIRST ../ex/ex_subst.c /^#define SUB_FIRST 0x01 \/* The 'r' flag isn't rea/ SUB_MUSTSETR ../ex/ex_subst.c /^#define SUB_MUSTSETR 0x02 \/* The 'r' flag is req/ TABCH ../vi/vs_line.c /^#define TABCH '-'$/ TAB_OFF ../vi/vi.h /^#define TAB_OFF(c) COL_OFF((c), O_VAL(sp, O_TABSTO/ TAB_RESET ../vi/vs_relative.c /^#define TAB_RESET { \\$/ TAGF_ERR ../ex/tag.h /^#define TAGF_ERR 0x01 \/* Error occurred. *\/$/ TAGF_ERR_WARN ../ex/tag.h /^#define TAGF_ERR_WARN 0x02 \/* Error reported. *\// TAG_CSCOPE ../ex/tag.h /^#define TAG_CSCOPE 0x01 \/* Cscope tag. *\/$/ TCC ../tcl_api/tcl.c /^#define TCC(name, function) { \\$/ TEMPORARY_FILE_STRING ../common/gs.h /^#define TEMPORARY_FILE_STRING "\/tmp" \/* Default / TERM_PUSH_SHIFT ../common/key.c /^#define TERM_PUSH_SHIFT 30$/ TKP ../tk/tki.h /^#define TKP(sp) ((TK_PRIVATE *)((sp)->gp->tk_priv/ TK_LLINE_IV ../tk/tki.h /^#define TK_LLINE_IV 0x0001 \/* Last line is in inv/ TK_SCR_VI_INIT ../tk/tki.h /^#define TK_SCR_VI_INIT 0x0002 \/* Vi screen initia/ TK_SIGHUP ../tk/tki.h /^#define TK_SIGHUP 0x0004 \/* SIGHUP arrived. *\/$/ TK_SIGINT ../tk/tki.h /^#define TK_SIGINT 0x0008 \/* SIGINT arrived. *\/$/ TK_SIGTERM ../tk/tki.h /^#define TK_SIGTERM 0x0010 \/* SIGTERM arrived. *\// TK_SIGWINCH ../tk/tki.h /^#define TK_SIGWINCH 0x0020 \/* SIGWINCH arrived. */ TMAP ../vi/vi.h /^#define TMAP _TMAP(sp)$/ TOPMASK ../common/key.c /^#define TOPMASK (BITS % 3 == 2 ? 3 : 1) << (BITS -/ TRACE ../common/util.c /^TRACE(sp, fmt, va_alist)$/ TRUE ../cl/cl.h /^#define TRUE 1$/ TXT_ADDNEWLINE ../common/key.h /^#define TXT_ADDNEWLINE 0x00000001 \/* Replay start/ TXT_AICHARS ../common/key.h /^#define TXT_AICHARS 0x00000002 \/* Leading autoind/ TXT_ALTWERASE ../common/key.h /^#define TXT_ALTWERASE 0x00000004 \/* Option: altwe/ TXT_APPENDEOL ../common/key.h /^#define TXT_APPENDEOL 0x00000008 \/* Appending aft/ TXT_AUTOINDENT ../common/key.h /^#define TXT_AUTOINDENT 0x00000010 \/* Autoindent s/ TXT_BACKSLASH ../common/key.h /^#define TXT_BACKSLASH 0x00000020 \/* Backslashes e/ TXT_BEAUTIFY ../common/key.h /^#define TXT_BEAUTIFY 0x00000040 \/* Only printable/ TXT_BS ../common/key.h /^#define TXT_BS 0x00000080 \/* Backspace returns t/ TXT_CEDIT ../common/key.h /^#define TXT_CEDIT 0x00000100 \/* Can return TERM_C/ TXT_CNTRLD ../common/key.h /^#define TXT_CNTRLD 0x00000200 \/* Control-D is a c/ TXT_CNTRLT ../common/key.h /^#define TXT_CNTRLT 0x00000400 \/* Control-T is an / TXT_CR ../common/key.h /^#define TXT_CR 0x00000800 \/* CR returns the buff/ TXT_DOTTERM ../common/key.h /^#define TXT_DOTTERM 0x00001000 \/* Leading '.' ter/ TXT_EMARK ../common/key.h /^#define TXT_EMARK 0x00002000 \/* End of replacemen/ TXT_EOFCHAR ../common/key.h /^#define TXT_EOFCHAR 0x00004000 \/* ICANON set, ret/ TXT_ESCAPE ../common/key.h /^#define TXT_ESCAPE 0x00008000 \/* Escape returns t/ TXT_FILEC ../common/key.h /^#define TXT_FILEC 0x00010000 \/* Option: filec. */ TXT_INFOLINE ../common/key.h /^#define TXT_INFOLINE 0x00020000 \/* Editing the in/ TXT_MAPINPUT ../common/key.h /^#define TXT_MAPINPUT 0x00040000 \/* Apply the inpu/ TXT_NLECHO ../common/key.h /^#define TXT_NLECHO 0x00080000 \/* Echo the newline/ TXT_NUMBER ../common/key.h /^#define TXT_NUMBER 0x00100000 \/* Number the line./ TXT_OVERWRITE ../common/key.h /^#define TXT_OVERWRITE 0x00200000 \/* Overwrite cha/ TXT_PROMPT ../common/key.h /^#define TXT_PROMPT 0x00400000 \/* Display a prompt/ TXT_RECORD ../common/key.h /^#define TXT_RECORD 0x00800000 \/* Record for repla/ TXT_REPLACE ../common/key.h /^#define TXT_REPLACE 0x01000000 \/* Replace; don't / TXT_REPLAY ../common/key.h /^#define TXT_REPLAY 0x02000000 \/* Replay the last / TXT_RESOLVE ../common/key.h /^#define TXT_RESOLVE 0x04000000 \/* Resolve the tex/ TXT_SEARCHINCR ../common/key.h /^#define TXT_SEARCHINCR 0x08000000 \/* Incremental / TXT_SHOWMATCH ../common/key.h /^#define TXT_SHOWMATCH 0x10000000 \/* Option: showm/ TXT_TTYWERASE ../common/key.h /^#define TXT_TTYWERASE 0x20000000 \/* Option: ttywe/ TXT_WRAPMARGIN ../common/key.h /^#define TXT_WRAPMARGIN 0x40000000 \/* Option: wrap/ UNMAP_TST ../vi/v_txt.c /^#define UNMAP_TST \\$/ UPDATE_CURSOR ../vi/vs_refresh.c /^#define UPDATE_CURSOR 0x01 \/* Update the cursor/ UPDATE_POSITION ../vi/v_txt.c /^#define UPDATE_POSITION(sp, tp) { \\$/ UPDATE_SCREEN ../vi/vs_refresh.c /^#define UPDATE_SCREEN 0x02 \/* Flush to screen. / USAGE ../cl/cl_funcs.c /^#define USAGE "\\$/ VC_BUFFER ../vi/vi.h /^#define VC_BUFFER 0x00000200 \/* The buffer was se/ VC_C1RESET ../vi/vi.h /^#define VC_C1RESET 0x00000400 \/* Reset C1SET flag/ VC_C1SET ../vi/vi.h /^#define VC_C1SET 0x00000800 \/* Count 1 was set. */ VC_C2SET ../vi/vi.h /^#define VC_C2SET 0x00001000 \/* Count 2 was set. */ VC_ISDOT ../vi/vi.h /^#define VC_ISDOT 0x00002000 \/* Command was the do/ VIP ../vi/vi.h /^#define VIP(sp) ((VI_PRIVATE *)((sp)->vi_private))/ VIP_CUR_INVALID ../vi/vi.h /^#define VIP_CUR_INVALID 0x0001 \/* Cursor position/ VIP_DIVIDER ../vi/vi.h /^#define VIP_DIVIDER 0x0002 \/* Divider line was di/ VIP_N_EX_PAINT ../vi/vi.h /^#define VIP_N_EX_PAINT 0x0004 \/* Clear and repain/ VIP_N_EX_REDRAW ../vi/vi.h /^#define VIP_N_EX_REDRAW 0x0008 \/* Schedule SC_SCR/ VIP_N_REFRESH ../vi/vi.h /^#define VIP_N_REFRESH 0x0010 \/* Repaint (from SMA/ VIP_N_RENUMBER ../vi/vi.h /^#define VIP_N_RENUMBER 0x0020 \/* Renumber screen / VIP_RCM_LAST ../vi/vi.h /^#define VIP_RCM_LAST 0x0040 \/* Cursor drawn to th/ VIP_S_MODELINE ../vi/vi.h /^#define VIP_S_MODELINE 0x0080 \/* Skip next modeli/ VIP_S_REFRESH ../vi/vi.h /^#define VIP_S_REFRESH 0x0100 \/* Skip next refresh/ VI_FHEADER ../common/recover.c /^#define VI_FHEADER "X-vi-recover-file: "$/ VI_INIT_IGNORE ../tk/tki.h /^#define VI_INIT_IGNORE(sp) \\$/ VI_PHEADER ../common/recover.c /^#define VI_PHEADER "X-vi-recover-path: "$/ VI_SCR_CFLUSH ../vi/vi.h /^#define VI_SCR_CFLUSH(vip) vip->ss_lno = OOBLNO$/ VI_VERSION ../ex/version.h /^#define VI_VERSION \\$/ VMC ../common/msg.c /^#define VMC "VI_MESSAGE_CATALOG"$/ VM_CMDFAILED ../vi/vi.h /^#define VM_CMDFAILED 0x00000001 \/* Command failed/ VM_COMMASK ../vi/vi.h /^#define VM_COMMASK 0x0000000f \/* Mask for VM flag/ VM_CUTREQ ../vi/vi.h /^#define VM_CUTREQ 0x00000002 \/* Always cut into n/ VM_LDOUBLE ../vi/vi.h /^#define VM_LDOUBLE 0x00000004 \/* Doubled command / VM_LMODE ../vi/vi.h /^#define VM_LMODE 0x00000008 \/* Motion is line ori/ VM_RCM ../vi/vi.h /^#define VM_RCM 0x00000010 \/* Use relative cursor/ VM_RCM_MASK ../vi/vi.h /^#define VM_RCM_MASK 0x000001f0 \/* Mask for RCM fl/ VM_RCM_SET ../vi/vi.h /^#define VM_RCM_SET 0x00000020 \/* RCM: set to curr/ VM_RCM_SETFNB ../vi/vi.h /^#define VM_RCM_SETFNB 0x00000040 \/* RCM: set to f/ VM_RCM_SETLAST ../vi/vi.h /^#define VM_RCM_SETLAST 0x00000080 \/* RCM: set to / VM_RCM_SETNNB ../vi/vi.h /^#define VM_RCM_SETNNB 0x00000100 \/* RCM: set to n/ V_ABS ../vi/vi.h /^#define V_ABS 0x00004000 \/* Absolute movement, s/ V_ABS_C ../vi/vi.h /^#define V_ABS_C 0x00008000 \/* V_ABS: if the line/ V_ABS_L ../vi/vi.h /^#define V_ABS_L 0x00010000 \/* V_ABS: if the line/ V_CHAR ../vi/vi.h /^#define V_CHAR 0x00020000 \/* Character (required/ V_CNT ../vi/vi.h /^#define V_CNT 0x00040000 \/* Count (optional, lea/ V_DOT ../vi/vi.h /^#define V_DOT 0x00080000 \/* On success, sets dot/ V_KEYW ../vi/vi.h /^#define V_KEYW 0x00100000 \/* Cursor referenced w/ V_MOTION ../vi/vi.h /^#define V_MOTION 0x00200000 \/* Motion (required, / V_MOVE ../vi/vi.h /^#define V_MOVE 0x00400000 \/* Command defines mov/ V_OBUF ../vi/vi.h /^#define V_OBUF 0x00800000 \/* Buffer (optional, l/ V_RBUF ../vi/vi.h /^#define V_RBUF 0x01000000 \/* Buffer (required, t/ V_SECURE ../vi/vi.h /^#define V_SECURE 0x02000000 \/* Permission denied / WMTSPACE ../vi/v_txt.c /^#define WMTSPACE wmt.offset + wmt.owrite + wmt.ins/ XTERM_RENAME ../cl/cl.h /^#define XTERM_RENAME "\\033]0;%s\\007"$/ _HMAP ../vi/vi.h /^#define _HMAP(sp) (VIP(sp)->h_smap)$/ _TMAP ../vi/vi.h /^#define _TMAP(sp) (VIP(sp)->t_smap)$/ __INUSE1 ../ex/ex.h /^#define __INUSE1 0xfffff800 \/* Same name space as/ __INUSE2 ../ex/ex.h /^#define __INUSE2 0x000004ff \/* Same name space as/ __NL_ARGMAX ../common/msg.c /^#define __NL_ARGMAX 20 \/* Set to 9 by System V. / addnstr ../cl/cl_bsd.c /^addnstr(s, n)$/ api_aline ../common/api.c /^api_aline(sp, lno, line, len)$/ api_dline ../common/api.c /^api_dline(sp, lno)$/ api_edit ../common/api.c /^api_edit(sp, file, spp, newscreen)$/ api_emessage ../common/api.c /^api_emessage(sp, text)$/ api_escreen ../common/api.c /^api_escreen(sp)$/ api_fscreen ../common/api.c /^api_fscreen(id, name)$/ api_getcursor ../common/api.c /^api_getcursor(sp, mp)$/ api_getmark ../common/api.c /^api_getmark(sp, markname, mp)$/ api_gline ../common/api.c /^api_gline(sp, lno, linepp, lenp)$/ api_iline ../common/api.c /^api_iline(sp, lno, line, len)$/ api_imessage ../common/api.c /^api_imessage(sp, text)$/ api_lline ../common/api.c /^api_lline(sp, lnop)$/ api_map ../common/api.c /^api_map(sp, name, map, len)$/ api_nextmark ../common/api.c /^api_nextmark(sp, next, namep)$/ api_opts_get ../common/api.c /^api_opts_get(sp, name, value, boolvalue)$/ api_opts_set ../common/api.c /^api_opts_set(sp, name, str_value, num_value, bool_/ api_run_str ../common/api.c /^api_run_str(sp, cmd)$/ api_setcursor ../common/api.c /^api_setcursor(sp, mp)$/ api_setmark ../common/api.c /^api_setmark(sp, markname, mp)$/ api_sline ../common/api.c /^api_sline(sp, lno, line, len)$/ api_swscreen ../common/api.c /^api_swscreen(sp, new)$/ api_unmap ../common/api.c /^api_unmap(sp, name)$/ argv_alloc ../ex/ex_argv.c /^argv_alloc(sp, len)$/ argv_comp ../ex/ex_argv.c /^argv_comp(a, b)$/ argv_exp0 ../ex/ex_argv.c /^argv_exp0(sp, excp, cmd, cmdlen)$/ argv_exp1 ../ex/ex_argv.c /^argv_exp1(sp, excp, cmd, cmdlen, is_bang)$/ argv_exp2 ../ex/ex_argv.c /^argv_exp2(sp, excp, cmd, cmdlen)$/ argv_exp3 ../ex/ex_argv.c /^argv_exp3(sp, excp, cmd, cmdlen)$/ argv_fexp ../ex/ex_argv.c /^argv_fexp(sp, excp, cmd, cmdlen, p, lenp, bpp, ble/ argv_free ../ex/ex_argv.c /^argv_free(sp)$/ argv_init ../ex/ex_argv.c /^argv_init(sp, excp)$/ argv_lexp ../ex/ex_argv.c /^argv_lexp(sp, excp, path)$/ argv_sexp ../ex/ex_argv.c /^argv_sexp(sp, bpp, blenp, lenp)$/ attach ../common/main.c /^attach(gp)$/ b_search ../common/search.c /^b_search(sp, fm, rm, ptrn, plen, eptrn, flags)$/ bdisplay ../ex/ex_display.c /^bdisplay(sp)$/ beep ../cl/cl_bsd.c /^beep()$/ binary_search ../ex/ex_tag.c /^binary_search(string, front, back)$/ binc ../common/util.c /^binc(sp, bp, bsizep, min)$/ bword ../vi/v_word.c /^bword(sp, vp, type)$/ cb_rotate ../common/cut.c /^cb_rotate(sp)$/ cl_addstr ../cl/cl_funcs.c /^cl_addstr(sp, str, len)$/ cl_attr ../cl/cl_funcs.c /^cl_attr(sp, attribute, on)$/ cl_baud ../cl/cl_funcs.c /^cl_baud(sp, ratep)$/ cl_bell ../cl/cl_funcs.c /^cl_bell(sp)$/ cl_clrtoeol ../cl/cl_funcs.c /^cl_clrtoeol(sp)$/ cl_cursor ../cl/cl_funcs.c /^cl_cursor(sp, yp, xp)$/ cl_deleteln ../cl/cl_funcs.c /^cl_deleteln(sp)$/ cl_event ../cl/cl_read.c /^cl_event(sp, evp, flags, ms)$/ cl_ex_adjust ../cl/cl_funcs.c /^cl_ex_adjust(sp, action)$/ cl_ex_end ../cl/cl_screen.c /^cl_ex_end(gp)$/ cl_ex_init ../cl/cl_screen.c /^cl_ex_init(sp)$/ cl_fmap ../cl/cl_term.c /^cl_fmap(sp, stype, from, flen, to, tlen)$/ cl_freecap ../cl/cl_screen.c /^cl_freecap(clp)$/ cl_func_std ../cl/cl_main.c /^cl_func_std(gp)$/ cl_getcap ../cl/cl_screen.c /^cl_getcap(sp, name, elementp)$/ cl_init ../cl/cl_main.c /^cl_init(gp)$/ cl_insertln ../cl/cl_funcs.c /^cl_insertln(sp)$/ cl_keyval ../cl/cl_funcs.c /^cl_keyval(sp, val, chp, dnep)$/ cl_move ../cl/cl_funcs.c /^cl_move(sp, lno, cno)$/ cl_omesg ../cl/cl_term.c /^cl_omesg(sp, clp, on)$/ cl_optchange ../cl/cl_term.c /^cl_optchange(sp, opt, str, valp)$/ cl_pfmap ../cl/cl_term.c /^cl_pfmap(sp, stype, from, flen, to, tlen)$/ cl_putchar ../cl/cl_term.c /^cl_putchar(ch)$/ cl_putenv ../cl/cl_screen.c /^cl_putenv(name, str, value)$/ cl_quit ../cl/cl_screen.c /^cl_quit(gp)$/ cl_read ../cl/cl_read.c /^cl_read(sp, flags, bp, blen, nrp, tp)$/ cl_refresh ../cl/cl_funcs.c /^cl_refresh(sp, repaint)$/ cl_rename ../cl/cl_funcs.c /^cl_rename(sp, name, on)$/ cl_resize ../cl/cl_read.c /^cl_resize(sp, lines, columns)$/ cl_screen ../cl/cl_screen.c /^cl_screen(sp, flags)$/ cl_ssize ../cl/cl_term.c /^cl_ssize(sp, sigwinch, rowp, colp, changedp)$/ cl_suspend ../cl/cl_funcs.c /^cl_suspend(sp, allowedp)$/ cl_term_end ../cl/cl_term.c /^cl_term_end(gp)$/ cl_term_init ../cl/cl_term.c /^cl_term_init(sp)$/ cl_usage ../cl/cl_funcs.c /^cl_usage()$/ cl_vi_end ../cl/cl_screen.c /^cl_vi_end(gp)$/ cl_vi_init ../cl/cl_screen.c /^cl_vi_init(sp)$/ compare ../ex/ex_tag.c /^compare(s1, s2, back)$/ create_cs_cmd ../ex/ex_cscope.c /^create_cs_cmd(sp, pattern, searchp)$/ cs_bblank ../vi/getc.c /^cs_bblank(sp, csp)$/ cs_fblank ../vi/getc.c /^cs_fblank(sp, csp)$/ cs_fspace ../vi/getc.c /^cs_fspace(sp, csp)$/ cs_init ../vi/getc.c /^cs_init(sp, csp)$/ cs_next ../vi/getc.c /^cs_next(sp, csp)$/ cs_prev ../vi/getc.c /^cs_prev(sp, csp)$/ csc_file ../ex/ex_cscope.c /^csc_file(sp, csc, name, dirp, dlenp, isolderp)$/ csc_help ../ex/ex_cscope.c /^csc_help(sp, cmd)$/ cscope_add ../ex/ex_cscope.c /^cscope_add(sp, cmdp, dname)$/ cscope_display ../ex/ex_cscope.c /^cscope_display(sp)$/ cscope_find ../ex/ex_cscope.c /^cscope_find(sp, cmdp, pattern)$/ cscope_help ../ex/ex_cscope.c /^cscope_help(sp, cmdp, subcmd)$/ cscope_kill ../ex/ex_cscope.c /^cscope_kill(sp, cmdp, cn)$/ cscope_reset ../ex/ex_cscope.c /^cscope_reset(sp, cmdp, notusedp)$/ cscope_search ../ex/ex_cscope.c /^cscope_search(sp, tqp, tp)$/ ctag_file ../ex/ex_tag.c /^ctag_file(sp, tfp, name, dirp, dlenp)$/ ctag_search ../ex/ex_tag.c /^ctag_search(sp, search, slen, tag)$/ ctag_sfile ../ex/ex_tag.c /^ctag_sfile(sp, tfp, tqp, tname)$/ ctag_slist ../ex/ex_tag.c /^ctag_slist(sp, tag)$/ cut ../common/cut.c /^cut(sp, namep, fm, tm, flags)$/ cut_close ../common/cut.c /^cut_close(gp)$/ cut_line ../common/cut.c /^cut_line(sp, lno, fcno, clen, cbp)$/ db ../ex/ex_display.c /^db(sp, cbp, name)$/ db_append ../common/line.c /^db_append(sp, update, lno, p, len)$/ db_delete ../common/line.c /^db_delete(sp, lno)$/ db_eget ../common/line.c /^db_eget(sp, lno, pp, lenp, isemptyp)$/ db_err ../common/line.c /^db_err(sp, lno)$/ db_exist ../common/line.c /^db_exist(sp, lno)$/ db_get ../common/line.c /^db_get(sp, lno, flags, pp, lenp)$/ db_insert ../common/line.c /^db_insert(sp, lno, p, len)$/ db_last ../common/line.c /^db_last(sp, lnop)$/ db_set ../common/line.c /^db_set(sp, lno, p, len)$/ del ../common/delete.c /^del(sp, fm, tm, lmode)$/ e_asp ../common/key.h /^#define e_asp _u_event._e_str.asp$/ e_c ../common/key.h /^#define e_c _u_event._e_ch.c$/ e_ch ../common/key.h /^#define e_ch _u_event._e_ch \/* !!! The structure/ e_cno ../common/key.h /^#define e_cno _u_event._e_mark.cno1$/ e_csp ../common/key.h /^#define e_csp _u_event._e_str.csp$/ e_fcno ../common/key.h /^#define e_fcno _u_event._e_mark.cno1$/ e_flags ../common/key.h /^#define e_flags _u_event._e_ch.flags$/ e_flno ../common/key.h /^#define e_flno _u_event._e_mark.lno1 \/* Text regi/ e_len ../common/key.h /^#define e_len _u_event._e_str.len$/ e_lno ../common/key.h /^#define e_lno _u_event._e_mark.lno1 \/* Single loc/ e_memcmp ../common/seq.c /^e_memcmp(p1, ep, n)$/ e_tcno ../common/key.h /^#define e_tcno _u_event._e_mark.cno2$/ e_tlno ../common/key.h /^#define e_tlno _u_event._e_mark.lno2$/ e_value ../common/key.h /^#define e_value _u_event._e_ch.value$/ editor ../common/main.c /^editor(gp, argc, argv)$/ eword ../vi/v_word.c /^eword(sp, vp, type)$/ ex ../ex/ex.c /^ex(spp)$/ ex_N_edit ../ex/ex_edit.c /^ex_N_edit(sp, cmdp, frp, attach)$/ ex_N_next ../ex/ex_args.c /^ex_N_next(sp, cmdp)$/ ex_abbr ../ex/ex_abbrev.c /^ex_abbr(sp, cmdp)$/ ex_aci ../ex/ex_append.c /^ex_aci(sp, cmdp, cmd)$/ ex_append ../ex/ex_append.c /^ex_append(sp, cmdp)$/ ex_args ../ex/ex_args.c /^ex_args(sp, cmdp)$/ ex_at ../ex/ex_at.c /^ex_at(sp, cmdp)$/ ex_badaddr ../ex/ex.c /^ex_badaddr(sp, cp, ba, nret)$/ ex_bang ../ex/ex_bang.c /^ex_bang(sp, cmdp)$/ ex_bg ../ex/ex_screen.c /^ex_bg(sp, cmdp)$/ ex_buildargv ../ex/ex_args.c /^ex_buildargv(sp, cmdp, name)$/ ex_cadd ../ex/ex_util.c /^ex_cadd(cmdp, ap, arg, len)$/ ex_cd ../ex/ex_cd.c /^ex_cd(sp, cmdp)$/ ex_change ../ex/ex_append.c /^ex_change(sp, cmdp)$/ ex_cinit ../ex/ex_util.c /^ex_cinit(cmdp, cmd_id, naddr, lno1, lno2, force, a/ ex_cmd ../ex/ex.c /^ex_cmd(sp)$/ ex_comlog ../ex/ex.c /^ex_comlog(sp, ecp)$/ ex_comm_search ../ex/ex.c /^ex_comm_search(name, len)$/ ex_copy ../ex/ex_move.c /^ex_copy(sp, cmdp)$/ ex_cscope ../ex/ex_cscope.c /^ex_cscope(sp, cmdp)$/ ex_delete ../ex/ex_delete.c /^ex_delete(sp, cmdp)$/ ex_discard ../ex/ex.c /^ex_discard(sp)$/ ex_display ../ex/ex_display.c /^ex_display(sp, cmdp)$/ ex_edit ../ex/ex_edit.c /^ex_edit(sp, cmdp)$/ ex_emsg ../ex/ex_util.c /^ex_emsg(sp, p, which)$/ ex_equal ../ex/ex_equal.c /^ex_equal(sp, cmdp)$/ ex_exec_proc ../ex/ex_shell.c /^ex_exec_proc(sp, cmdp, cmd, msg, need_newline)$/ ex_exrc ../ex/ex_init.c /^ex_exrc(sp)$/ ex_fflush ../ex/ex_print.c /^ex_fflush(sp)$/ ex_fg ../ex/ex_screen.c /^ex_fg(sp, cmdp)$/ ex_file ../ex/ex_file.c /^ex_file(sp, cmdp)$/ ex_filter ../ex/ex_filter.c /^ex_filter(sp, cmdp, fm, tm, rp, cmd, ftype)$/ ex_g_insdel ../ex/ex_global.c /^ex_g_insdel(sp, op, lno)$/ ex_g_setup ../ex/ex_global.c /^ex_g_setup(sp, cmdp, cmd)$/ ex_getline ../ex/ex_util.c /^ex_getline(sp, fp, lenp)$/ ex_global ../ex/ex_global.c /^ex_global(sp, cmdp)$/ ex_help ../ex/ex_usage.c /^ex_help(sp, cmdp)$/ ex_init ../ex/ex_util.c /^ex_init(sp)$/ ex_insert ../ex/ex_append.c /^ex_insert(sp, cmdp)$/ ex_is_abbrev ../ex/ex.c /^ex_is_abbrev(name, len)$/ ex_is_unmap ../ex/ex.c /^ex_is_unmap(name, len)$/ ex_join ../ex/ex_join.c /^ex_join(sp, cmdp)$/ ex_ldisplay ../ex/ex_print.c /^ex_ldisplay(sp, p, len, col, flags)$/ ex_line ../ex/ex.c /^ex_line(sp, ecp, mp, isaddrp, errp)$/ ex_list ../ex/ex_print.c /^ex_list(sp, cmdp)$/ ex_load ../ex/ex.c /^ex_load(sp)$/ ex_map ../ex/ex_map.c /^ex_map(sp, cmdp)$/ ex_mark ../ex/ex_mark.c /^ex_mark(sp, cmdp)$/ ex_mkexrc ../ex/ex_mkexrc.c /^ex_mkexrc(sp, cmdp)$/ ex_move ../ex/ex_move.c /^ex_move(sp, cmdp)$/ ex_ncheck ../ex/ex_util.c /^ex_ncheck(sp, force)$/ ex_next ../ex/ex_args.c /^ex_next(sp, cmdp)$/ ex_number ../ex/ex_print.c /^ex_number(sp, cmdp)$/ ex_open ../ex/ex_open.c /^ex_open(sp, cmdp)$/ ex_optchange ../ex/ex_init.c /^ex_optchange(sp, offset, str, valp)$/ ex_perl ../ex/ex_perl.c /^ex_perl(sp, cmdp)$/ ex_pr ../ex/ex_print.c /^ex_pr(sp, cmdp)$/ ex_prchars ../ex/ex_print.c /^ex_prchars(sp, p, colp, len, flags, repeatc)$/ ex_preserve ../ex/ex_preserve.c /^ex_preserve(sp, cmdp)$/ ex_prev ../ex/ex_args.c /^ex_prev(sp, cmdp)$/ ex_print ../ex/ex_print.c /^ex_print(sp, cmdp, fp, tp, flags)$/ ex_printf ../ex/ex_print.c /^ex_printf(sp, fmt, va_alist)$/ ex_put ../ex/ex_put.c /^ex_put(sp, cmdp)$/ ex_puts ../ex/ex_print.c /^ex_puts(sp, str)$/ ex_quit ../ex/ex_quit.c /^ex_quit(sp, cmdp)$/ ex_range ../ex/ex.c /^ex_range(sp, ecp, errp)$/ ex_read ../ex/ex_read.c /^ex_read(sp, cmdp)$/ ex_readfp ../ex/ex_read.c /^ex_readfp(sp, name, fp, fm, nlinesp, silent)$/ ex_recover ../ex/ex_preserve.c /^ex_recover(sp, cmdp)$/ ex_resize ../ex/ex_screen.c /^ex_resize(sp, cmdp)$/ ex_rew ../ex/ex_args.c /^ex_rew(sp, cmdp)$/ ex_run_file ../ex/ex_init.c /^ex_run_file(sp, name)$/ ex_run_str ../ex/ex_init.c /^ex_run_str(sp, name, str, len, ex_flags, nocopy)$/ ex_s ../ex/ex_subst.c /^ex_s(sp, cmdp)$/ ex_scprint ../ex/ex_print.c /^ex_scprint(sp, fp, tp)$/ ex_screen_copy ../ex/ex_init.c /^ex_screen_copy(orig, sp)$/ ex_screen_end ../ex/ex_init.c /^ex_screen_end(sp)$/ ex_script ../ex/ex_script.c /^ex_script(sp, cmdp)$/ ex_sdisplay ../ex/ex_screen.c /^ex_sdisplay(sp)$/ ex_set ../ex/ex_set.c /^ex_set(sp, cmdp)$/ ex_shell ../ex/ex_shell.c /^ex_shell(sp, cmdp)$/ ex_shiftl ../ex/ex_shift.c /^ex_shiftl(sp, cmdp)$/ ex_shiftr ../ex/ex_shift.c /^ex_shiftr(sp, cmdp)$/ ex_source ../ex/ex_source.c /^ex_source(sp, cmdp)$/ ex_stop ../ex/ex_stop.c /^ex_stop(sp, cmdp)$/ ex_subagain ../ex/ex_subst.c /^ex_subagain(sp, cmdp)$/ ex_subtilde ../ex/ex_subst.c /^ex_subtilde(sp, cmdp)$/ ex_tag_Nswitch ../ex/ex_tag.c /^ex_tag_Nswitch(sp, tp, force)$/ ex_tag_copy ../ex/ex_tag.c /^ex_tag_copy(orig, sp)$/ ex_tag_display ../ex/ex_tag.c /^ex_tag_display(sp)$/ ex_tag_first ../ex/ex_tag.c /^ex_tag_first(sp, tagarg)$/ ex_tag_free ../ex/ex_tag.c /^ex_tag_free(sp)$/ ex_tag_next ../ex/ex_tag.c /^ex_tag_next(sp, cmdp)$/ ex_tag_nswitch ../ex/ex_tag.c /^ex_tag_nswitch(sp, tp, force)$/ ex_tag_pop ../ex/ex_tag.c /^ex_tag_pop(sp, cmdp)$/ ex_tag_prev ../ex/ex_tag.c /^ex_tag_prev(sp, cmdp)$/ ex_tag_push ../ex/ex_tag.c /^ex_tag_push(sp, cmdp)$/ ex_tag_top ../ex/ex_tag.c /^ex_tag_top(sp, cmdp)$/ ex_tagf_alloc ../ex/ex_tag.c /^ex_tagf_alloc(sp, str)$/ ex_tcl ../ex/ex_tcl.c /^ex_tcl(sp, cmdp)$/ ex_txt ../ex/ex_txt.c /^ex_txt(sp, tiqh, prompt, flags)$/ ex_unabbr ../ex/ex_abbrev.c /^ex_unabbr(sp, cmdp)$/ ex_undo ../ex/ex_undo.c /^ex_undo(sp, cmdp)$/ ex_unknown ../ex/ex.c /^ex_unknown(sp, cmd, len)$/ ex_unmap ../ex/ex_map.c /^ex_unmap(sp, cmdp)$/ ex_usage ../ex/ex_usage.c /^ex_usage(sp, cmdp)$/ ex_v ../ex/ex_global.c /^ex_v(sp, cmdp)$/ ex_version ../ex/ex_version.c /^ex_version(sp, cmdp)$/ ex_visual ../ex/ex_visual.c /^ex_visual(sp, cmdp)$/ ex_viusage ../ex/ex_usage.c /^ex_viusage(sp, cmdp)$/ ex_wn ../ex/ex_write.c /^ex_wn(sp, cmdp)$/ ex_wq ../ex/ex_write.c /^ex_wq(sp, cmdp)$/ ex_write ../ex/ex_write.c /^ex_write(sp, cmdp)$/ ex_writefp ../ex/ex_write.c /^ex_writefp(sp, name, fp, fm, tm, nlno, nch, silent/ ex_xit ../ex/ex_write.c /^ex_xit(sp, cmdp)$/ ex_yank ../ex/ex_yank.c /^ex_yank(sp, cmdp)$/ ex_z ../ex/ex_z.c /^ex_z(sp, cmdp)$/ exrc_isok ../ex/ex_init.c /^exrc_isok(sp, sbp, path, rootown, rootid)$/ exwr ../ex/ex_write.c /^exwr(sp, cmdp, cmd)$/ f_altwerase ../common/options_f.c /^f_altwerase(sp, op, str, valp)$/ f_columns ../common/options_f.c /^f_columns(sp, op, str, valp)$/ f_lines ../common/options_f.c /^f_lines(sp, op, str, valp)$/ f_lisp ../common/options_f.c /^f_lisp(sp, op, str, valp)$/ f_msgcat ../common/options_f.c /^f_msgcat(sp, op, str, valp)$/ f_paragraph ../common/options_f.c /^f_paragraph(sp, op, str, valp)$/ f_print ../common/options_f.c /^f_print(sp, op, str, valp)$/ f_readonly ../common/options_f.c /^f_readonly(sp, op, str, valp)$/ f_recompile ../common/options_f.c /^f_recompile(sp, op, str, valp)$/ f_reformat ../common/options_f.c /^f_reformat(sp, op, str, valp)$/ f_search ../common/search.c /^f_search(sp, fm, rm, ptrn, plen, eptrn, flags)$/ f_section ../common/options_f.c /^f_section(sp, op, str, valp)$/ f_ttywerase ../common/options_f.c /^f_ttywerase(sp, op, str, valp)$/ f_w1200 ../common/options_f.c /^f_w1200(sp, op, str, valp)$/ f_w300 ../common/options_f.c /^f_w300(sp, op, str, valp)$/ f_w9600 ../common/options_f.c /^f_w9600(sp, op, str, valp)$/ f_window ../common/options_f.c /^f_window(sp, op, str, valp)$/ file_add ../common/exf.c /^file_add(sp, name)$/ file_aw ../common/exf.c /^file_aw(sp, flags)$/ file_backup ../common/exf.c /^file_backup(sp, name, bname)$/ file_cinit ../common/exf.c /^file_cinit(sp)$/ file_comment ../common/exf.c /^file_comment(sp)$/ file_end ../common/exf.c /^file_end(sp, ep, force)$/ file_init ../common/exf.c /^file_init(sp, frp, rcv_name, flags)$/ file_lock ../common/exf.c /^file_lock(sp, name, fdp, fd, iswrite)$/ file_m1 ../common/exf.c /^file_m1(sp, force, flags)$/ file_m2 ../common/exf.c /^file_m2(sp, force)$/ file_m3 ../common/exf.c /^file_m3(sp, force)$/ file_spath ../common/exf.c /^file_spath(sp, frp, sbp, existsp)$/ file_write ../common/exf.c /^file_write(sp, fm, tm, name, flags)$/ filter_ldisplay ../ex/ex_filter.c /^filter_ldisplay(sp, fp)$/ flash ../cl/cl_bsd.c /^flash()$/ fword ../vi/v_word.c /^fword(sp, vp, type)$/ gdbrefresh ../cl/cl_funcs.c /^gdbrefresh()$/ get_paths ../ex/ex_cscope.c /^get_paths(sp, csc)$/ getint ../tcl_api/tcl.c /^getint(interp, msg, s, intp)$/ getscreenid ../tcl_api/tcl.c /^getscreenid(interp, spp, id, name)$/ goto_adjust ../vi/v_scroll.c /^goto_adjust(vp)$/ gs_init ../cl/cl_main.c /^gs_init(name)$/ h_hup ../cl/cl_main.c /^h_hup(signo)$/ h_int ../cl/cl_main.c /^h_int(signo)$/ h_term ../cl/cl_main.c /^h_term(signo)$/ h_winch ../cl/cl_main.c /^h_winch(signo)$/ idlok ../cl/cl_bsd.c /^idlok(win, bf)$/ inc_buf ../vi/v_put.c /^inc_buf(sp, vp)$/ inc_err ../vi/v_increment.c /^inc_err(sp, nret)$/ inword ../vi/vi.h /^#define inword(ch) (isalnum(ch) || (ch) == '_')$/ io ../vi/v_itxt.c /^io(sp, vp, cmd)$/ isblank ../common/key.h /^#define isblank(ch) ((ch) == ' ' || (ch) == '\\t')/ ishex ../vi/v_increment.c /^#define ishex(c) (isdigit(c) || strchr("abcdefABCD/ isoctal ../vi/v_increment.c /^#define isoctal(c) (isdigit(c) && (c) != '8' && (c/ keypad ../cl/cl_bsd.c /^keypad(a, on)$/ lcmp ../cl/cl_bsd.c /^lcmp(a, b)$/ linear_search ../ex/ex_tag.c /^linear_search(string, front, back)$/ log_backward ../common/log.c /^log_backward(sp, rp)$/ log_cursor ../common/log.c /^log_cursor(sp)$/ log_cursor1 ../common/log.c /^log_cursor1(sp, type)$/ log_end ../common/log.c /^log_end(sp, ep)$/ log_err ../common/log.c /^log_err(sp, file, line)$/ log_forward ../common/log.c /^log_forward(sp, rp)$/ log_init ../common/log.c /^log_init(sp, ep)$/ log_line ../common/log.c /^log_line(sp, lno, action)$/ log_mark ../common/log.c /^log_mark(sp, lmp)$/ log_setline ../common/log.c /^log_setline(sp)$/ log_trace ../common/log.c /^log_trace(sp, msg, rno, p)$/ lookup_ccmd ../ex/ex_cscope.c /^lookup_ccmd(name)$/ mark ../vi/v_mark.c /^mark(sp, vp, cmd)$/ mark_end ../common/mark.c /^mark_end(sp, ep)$/ mark_find ../common/mark.c /^mark_find(sp, key)$/ mark_get ../common/mark.c /^mark_get(sp, key, mp, mtype)$/ mark_init ../common/mark.c /^mark_init(sp, ep)$/ mark_insdel ../common/mark.c /^mark_insdel(sp, op, lno)$/ mark_set ../common/mark.c /^mark_set(sp, key, value, userset)$/ mod_rpt ../common/msg.c /^mod_rpt(sp)$/ msg_cat ../common/msg.c /^msg_cat(sp, str, lenp)$/ msg_close ../common/msg.c /^msg_close(gp)$/ msg_cmsg ../common/msg.c /^msg_cmsg(sp, which, lenp)$/ msg_open ../common/msg.c /^msg_open(sp, file)$/ msg_print ../common/msg.c /^msg_print(sp, s, needfree)$/ msghandler ../tcl_api/tcl.c /^msghandler(sp, mtype, msg, len)$/ msgq ../common/msg.c /^msgq(sp, mt, fmt, va_alist)$/ msgq_status ../common/msg.c /^msgq_status(sp, lno, flags)$/ msgq_str ../common/msg.c /^msgq_str(sp, mtype, str, fmt)$/ newterm ../cl/cl_bsd.c /^newterm(a, b, c)$/ nget_slong ../common/util.c /^nget_slong(valp, p, endp, base)$/ nget_uslong ../common/util.c /^nget_uslong(valp, p, endp, base)$/ nonblank ../common/util.c /^nonblank(sp, lno, cnop)$/ noprev ../vi/v_ch.c /^noprev(sp)$/ notfound ../vi/v_ch.c /^notfound(sp, ch)$/ o_set ../common/options.c /^o_set(sp, opt, flags, str, val)$/ opts_abbcmp ../common/options.c /^opts_abbcmp(a, b)$/ opts_cmp ../common/options.c /^opts_cmp(a, b)$/ opts_copy ../common/options.c /^opts_copy(orig, sp)$/ opts_dump ../common/options.c /^opts_dump(sp, type)$/ opts_empty ../common/options.c /^opts_empty(sp, off, silent)$/ opts_free ../common/options.c /^opts_free(sp)$/ opts_init ../common/options.c /^opts_init(sp, oargs)$/ opts_nomatch ../common/options.c /^opts_nomatch(sp, name)$/ opts_print ../common/options.c /^opts_print(sp, op)$/ opts_save ../common/options.c /^opts_save(sp, fp)$/ opts_search ../common/options.c /^opts_search(name)$/ opts_set ../common/options.c /^opts_set(sp, argv, usage)$/ parse ../ex/ex_cscope.c /^parse(sp, csc, tqp, matchesp)$/ perr ../cl/cl_main.c /^perr(name, msg)$/ proc_wait ../ex/ex_shell.c /^proc_wait(sp, pid, cmd, silent, okpipe)$/ ptym_open ../ex/ex_script.c /^ptym_open(pts_name)$/ ptys_open ../ex/ex_script.c /^ptys_open(fdm, pts_name)$/ put ../common/put.c /^put(sp, cbp, namep, cp, rp, append)$/ rcv_copy ../common/recover.c /^rcv_copy(sp, wfd, fname)$/ rcv_email ../common/recover.c /^rcv_email(sp, fname)$/ rcv_gets ../common/recover.c /^rcv_gets(buf, len, fd)$/ rcv_init ../common/recover.c /^rcv_init(sp)$/ rcv_list ../common/recover.c /^rcv_list(sp)$/ rcv_mailfile ../common/recover.c /^rcv_mailfile(sp, issync, cp_path)$/ rcv_mktemp ../common/recover.c /^rcv_mktemp(sp, path, dname, perms)$/ rcv_read ../common/recover.c /^rcv_read(sp, frp)$/ rcv_sync ../common/recover.c /^rcv_sync(sp, flags)$/ rcv_tmp ../common/recover.c /^rcv_tmp(sp, ep, name)$/ re_compile ../ex/ex_subst.c /^re_compile(sp, ptrn, plen, ptrnp, lenp, rep, flags/ re_conv ../ex/ex_subst.c /^re_conv(sp, ptrnp, plenp, replacedp)$/ re_cscope_conv ../ex/ex_subst.c /^re_cscope_conv(sp, ptrnp, plenp, replacedp)$/ re_error ../ex/ex_subst.c /^re_error(sp, errcode, preg)$/ re_sub ../ex/ex_subst.c /^re_sub(sp, ip, lbp, lbclenp, lblenp, match)$/ re_tag_conv ../ex/ex_subst.c /^re_tag_conv(sp, ptrnp, plenp, replacedp)$/ read_prompt ../ex/ex_cscope.c /^read_prompt(sp, csc)$/ run_cscope ../ex/ex_cscope.c /^run_cscope(sp, csc, dbname)$/ s ../ex/ex_subst.c /^s(sp, cmdp, s, re, flags)$/ scr_update ../common/line.c /^scr_update(sp, lno, op, current)$/ screen_end ../common/screen.c /^screen_end(sp)$/ screen_init ../common/screen.c /^screen_init(gp, orig, spp)$/ screen_next ../common/screen.c /^screen_next(sp)$/ search_busy ../common/search.c /^search_busy(sp, btype)$/ search_init ../common/search.c /^search_init(sp, dir, ptrn, plen, epp, flags)$/ search_msg ../common/search.c /^search_msg(sp, msg)$/ seq_close ../common/seq.c /^seq_close(gp)$/ seq_delete ../common/seq.c /^seq_delete(sp, input, ilen, stype)$/ seq_dump ../common/seq.c /^seq_dump(sp, stype, isname)$/ seq_find ../common/seq.c /^seq_find(sp, lastqp, e_input, c_input, ilen, stype/ seq_mdel ../common/seq.c /^seq_mdel(qp)$/ seq_save ../common/seq.c /^seq_save(sp, fp, prefix, stype)$/ seq_set ../common/seq.c /^seq_set(sp, name, nlen, input, ilen, output, olen,/ set_alt_name ../common/exf.c /^set_alt_name(sp, name)$/ set_txt_std ../vi/v_itxt.c /^set_txt_std(sp, vp, flags)$/ setsig ../cl/cl_main.c /^setsig(signo, oactp, handler)$/ setupterm ../cl/cl_bsd.c /^setupterm(ttype, fno, errp)$/ sfdcnewnvi ../perl_api/perlsfio.c /^sfdcnewnvi(scrp)$/ sfnviwrite ../perl_api/perlsfio.c /^sfnviwrite(f, buf, n, disc)$/ shift ../ex/ex_shift.c /^shift(sp, cmdp, rl)$/ sig_end ../cl/cl_main.c /^sig_end(gp)$/ sig_init ../cl/cl_main.c /^sig_init(gp, sp)$/ sigmsg ../ex/ex_shell.c /^sigmsg(signo)$/ sscr_check ../ex/ex_script.c /^sscr_check(sp)$/ sscr_end ../ex/ex_script.c /^sscr_end(sp)$/ sscr_exec ../ex/ex_script.c /^sscr_exec(sp, lno)$/ sscr_getprompt ../ex/ex_script.c /^sscr_getprompt(sp)$/ sscr_init ../ex/ex_script.c /^sscr_init(sp)$/ sscr_input ../ex/ex_script.c /^sscr_input(sp)$/ sscr_insert ../ex/ex_script.c /^sscr_insert(sp)$/ sscr_matchprompt ../ex/ex_script.c /^sscr_matchprompt(sp, lp, line_len, lenp)$/ sscr_pty ../ex/ex_script.c /^sscr_pty(amaster, aslave, name, termp, winp)$/ sscr_setprompt ../ex/ex_script.c /^sscr_setprompt(sp, buf, len)$/ start_cscopes ../ex/ex_cscope.c /^start_cscopes(sp, cmdp)$/ tag_copy ../ex/ex_tag.c /^tag_copy(sp, otp, tpp)$/ tag_msg ../ex/ex_tag.c /^tag_msg(sp, msg, tag)$/ tag_pop ../ex/ex_tag.c /^tag_pop(sp, dtqp, force)$/ tagf_copy ../ex/ex_tag.c /^tagf_copy(sp, otfp, tfpp)$/ tagf_free ../ex/ex_tag.c /^tagf_free(sp, tfp)$/ tagq_copy ../ex/ex_tag.c /^tagq_copy(sp, otqp, tqpp)$/ tagq_free ../ex/ex_tag.c /^tagq_free(sp, tqp)$/ tail ../common/util.c /^tail(path)$/ tcl_aline ../tcl_api/tcl.c /^tcl_aline(clientData, interp, argc, argv)$/ tcl_dline ../tcl_api/tcl.c /^tcl_dline(clientData, interp, argc, argv)$/ tcl_err ../tk/tk_main.c /^tcl_err(tkp)$/ tcl_escreen ../tcl_api/tcl.c /^tcl_escreen(clientData, interp, argc, argv)$/ tcl_fscreen ../tcl_api/tcl.c /^tcl_fscreen(clientData, interp, argc, argv)$/ tcl_getcursor ../tcl_api/tcl.c /^tcl_getcursor(clientData, interp, argc, argv)$/ tcl_getmark ../tcl_api/tcl.c /^tcl_getmark(clientData, interp, argc, argv)$/ tcl_gline ../tcl_api/tcl.c /^tcl_gline(clientData, interp, argc, argv)$/ tcl_iline ../tcl_api/tcl.c /^tcl_iline(clientData, interp, argc, argv)$/ tcl_init ../tcl_api/tcl.c /^tcl_init(gp)$/ tcl_iscreen ../tcl_api/tcl.c /^tcl_iscreen(clientData, interp, argc, argv)$/ tcl_lline ../tcl_api/tcl.c /^tcl_lline(clientData, interp, argc, argv)$/ tcl_map ../tcl_api/tcl.c /^tcl_map(clientData, interp, argc, argv)$/ tcl_msg ../tcl_api/tcl.c /^tcl_msg(clientData, interp, argc, argv)$/ tcl_opts_get ../tcl_api/tcl.c /^tcl_opts_get(clientData, interp, argc, argv)$/ tcl_opts_set ../tcl_api/tcl.c /^tcl_opts_set(clientData, interp, argc, argv)$/ tcl_setcursor ../tcl_api/tcl.c /^tcl_setcursor(clientData, interp, argc, argv)$/ tcl_setmark ../tcl_api/tcl.c /^tcl_setmark(clientData, interp, argc, argv)$/ tcl_sline ../tcl_api/tcl.c /^tcl_sline(clientData, interp, argc, argv)$/ tcl_swscreen ../tcl_api/tcl.c /^tcl_swscreen(clientData, interp, argc, argv)$/ tcl_unmap ../tcl_api/tcl.c /^tcl_unmap(clientData, interp, argc, argv)$/ term_init ../cl/cl_main.c /^term_init(name, ttype)$/ terminate ../ex/ex_cscope.c /^terminate(sp, csc, n)$/ text_free ../common/cut.c /^text_free(tp)$/ text_init ../common/cut.c /^text_init(sp, p, len, total_len)$/ text_lfree ../common/cut.c /^text_lfree(headp)$/ tigetstr ../cl/cl_bsd.c /^tigetstr(name)$/ tk_addstr ../tk/tk_funcs.c /^tk_addstr(sp, str, len)$/ tk_attr ../tk/tk_funcs.c /^tk_attr(sp, attribute, on)$/ tk_baud ../tk/tk_funcs.c /^tk_baud(sp, ratep)$/ tk_bell ../tk/tk_funcs.c /^tk_bell(sp)$/ tk_clrtoeol ../tk/tk_funcs.c /^tk_clrtoeol(sp)$/ tk_cursor ../tk/tk_funcs.c /^tk_cursor(sp, yp, xp)$/ tk_deleteln ../tk/tk_funcs.c /^tk_deleteln(sp)$/ tk_event ../tk/tk_read.c /^tk_event(sp, evp, flags, timeout)$/ tk_ex_adjust ../tk/tk_funcs.c /^tk_ex_adjust(sp, action)$/ tk_fmap ../tk/tk_term.c /^tk_fmap(sp, stype, from, flen, to, tlen)$/ tk_insertln ../tk/tk_funcs.c /^tk_insertln(sp)$/ tk_key ../tk/tk_read.c /^tk_key(clientData, interp, argc, argv)$/ tk_keyval ../tk/tk_funcs.c /^tk_keyval(sp, val, chp, dnep)$/ tk_move ../tk/tk_funcs.c /^tk_move(sp, lno, cno)$/ tk_msg ../tk/tk_util.c /^tk_msg(sp, mtype, line, rlen)$/ tk_op ../tk/tk_util.c /^tk_op(clientData, interp, argc, argv)$/ tk_op_push ../tk/tk_util.c /^tk_op_push(sp, tkp, et)$/ tk_opt_init ../tk/tk_util.c /^tk_opt_init(clientData, interp, argc, argv)$/ tk_opt_set ../tk/tk_util.c /^tk_opt_set(clientData, interp, argc, argv)$/ tk_optchange ../tk/tk_term.c /^tk_optchange(sp, opt, str, valp)$/ tk_quit ../tk/tk_screen.c /^tk_quit(gp)$/ tk_read ../tk/tk_read.c /^tk_read(sp, timeout)$/ tk_refresh ../tk/tk_funcs.c /^tk_refresh(sp, repaint)$/ tk_rename ../tk/tk_funcs.c /^tk_rename(sp)$/ tk_resize ../tk/tk_read.c /^tk_resize(sp, lines, columns)$/ tk_screen ../tk/tk_screen.c /^tk_screen(sp, flags)$/ tk_ssize ../tk/tk_term.c /^tk_ssize(sp, sigwinch, rowp, colp, changedp)$/ tk_suspend ../tk/tk_funcs.c /^tk_suspend(sp, allowedp)$/ tk_term_end ../tk/tk_term.c /^tk_term_end(gp)$/ tk_term_init ../tk/tk_term.c /^tk_term_init(sp)$/ tk_usage ../tk/tk_funcs.c /^tk_usage()$/ tk_version ../tk/tk_util.c /^tk_version(clientData, interp, argc, argv)$/ txt_Rresolve ../vi/v_txt.c /^txt_Rresolve(sp, tiqh, tp, orig_len)$/ txt_abbrev ../vi/v_txt.c /^txt_abbrev(sp, tp, pushcp, isinfoline, didsubp, tu/ txt_ai_resolve ../vi/v_txt.c /^txt_ai_resolve(sp, tp, changedp)$/ txt_backup ../vi/v_txt.c /^txt_backup(sp, tiqh, tp, flagsp)$/ txt_dent ../ex/ex_txt.c /^txt_dent(sp, tp)$/ txt_emark ../vi/v_txt.c /^txt_emark(sp, tp, cno)$/ txt_err ../vi/v_txt.c /^txt_err(sp, tiqh)$/ txt_fc ../vi/v_txt.c /^txt_fc(sp, tp, redrawp)$/ txt_fc_col ../vi/v_txt.c /^txt_fc_col(sp, argc, argv)$/ txt_hex ../vi/v_txt.c /^txt_hex(sp, tp)$/ txt_insch ../vi/v_txt.c /^txt_insch(sp, tp, chp, flags)$/ txt_isrch ../vi/v_txt.c /^txt_isrch(sp, vp, tp, is_flagsp)$/ txt_map_end ../vi/v_txt.c /^txt_map_end(sp)$/ txt_map_init ../vi/v_txt.c /^txt_map_init(sp)$/ txt_margin ../vi/v_txt.c /^txt_margin(sp, tp, wmtp, didbreak, flags)$/ txt_nomorech ../vi/v_txt.c /^txt_nomorech(sp)$/ txt_prompt ../ex/ex_txt.c /^txt_prompt(sp, tp, prompt, flags)$/ txt_resolve ../vi/v_txt.c /^txt_resolve(sp, tiqh, flags)$/ txt_showmatch ../vi/v_txt.c /^txt_showmatch(sp, tp)$/ txt_unmap ../vi/v_txt.c /^txt_unmap(sp, tp, ec_flagsp)$/ ulcase ../vi/v_ulcase.c /^ulcase(sp, lno, lp, len, scno, ecno)$/ v_Put ../vi/v_put.c /^v_Put(sp, vp)$/ v_Replace ../vi/v_itxt.c /^v_Replace(sp, vp)$/ v_Undo ../vi/v_undo.c /^v_Undo(sp, vp)$/ v_Xchar ../vi/v_xchar.c /^v_Xchar(sp, vp)$/ v_again ../vi/v_ex.c /^v_again(sp, vp)$/ v_alias ../vi/vi.c /^v_alias(sp, vp, kp)$/ v_at ../vi/v_at.c /^v_at(sp, vp)$/ v_bmark ../vi/v_mark.c /^v_bmark(sp, vp)$/ v_bottom ../vi/v_scroll.c /^v_bottom(sp, vp)$/ v_buildps ../vi/v_paragraph.c /^v_buildps(sp, p_p, s_p)$/ v_cfirst ../vi/v_left.c /^v_cfirst(sp, vp)$/ v_chF ../vi/v_ch.c /^v_chF(sp, vp)$/ v_chT ../vi/v_ch.c /^v_chT(sp, vp)$/ v_change ../vi/v_itxt.c /^v_change(sp, vp)$/ v_chf ../vi/v_ch.c /^v_chf(sp, vp)$/ v_chrepeat ../vi/v_ch.c /^v_chrepeat(sp, vp)$/ v_chrrepeat ../vi/v_ch.c /^v_chrrepeat(sp, vp)$/ v_cht ../vi/v_ch.c /^v_cht(sp, vp)$/ v_cmd ../vi/vi.c /^v_cmd(sp, dp, vp, ismotion, comcountp, mappedp)$/ v_comlog ../vi/vi.c /^v_comlog(sp, vp)$/ v_correct ../vi/v_search.c /^v_correct(sp, vp, isdelta)$/ v_count ../vi/vi.c /^v_count(sp, fkey, countp)$/ v_cr ../vi/v_scroll.c /^v_cr(sp, vp)$/ v_delete ../vi/v_delete.c /^v_delete(sp, vp)$/ v_dollar ../vi/v_right.c /^v_dollar(sp, vp)$/ v_down ../vi/v_scroll.c /^v_down(sp, vp)$/ v_dtoh ../vi/vi.c /^v_dtoh(sp)$/ v_ecl ../vi/v_ex.c /^v_ecl(sp)$/ v_ecl_exec ../vi/v_ex.c /^v_ecl_exec(sp)$/ v_ecl_init ../vi/v_ex.c /^v_ecl_init(sp)$/ v_ecl_log ../vi/v_ex.c /^v_ecl_log(sp, tp)$/ v_emsg ../vi/v_util.c /^v_emsg(sp, p, which)$/ v_end ../common/main.c /^v_end(gp)$/ v_eof ../vi/v_util.c /^v_eof(sp, mp)$/ v_eol ../vi/v_util.c /^v_eol(sp, mp)$/ v_estr ../common/main.c /^v_estr(name, eno, msg)$/ v_event_append ../common/key.c /^v_event_append(sp, argp)$/ v_event_err ../common/key.c /^v_event_err(sp, evp)$/ v_event_exec ../vi/v_ex.c /^v_event_exec(sp, vp)$/ v_event_flush ../common/key.c /^v_event_flush(sp, flags)$/ v_event_get ../common/key.c /^v_event_get(sp, argp, timeout, flags)$/ v_event_grow ../common/key.c /^v_event_grow(sp, add)$/ v_event_push ../common/key.c /^v_event_push(sp, p_evp, p_s, nitems, flags)$/ v_ex ../vi/v_ex.c /^v_ex(sp, vp)$/ v_ex_done ../vi/v_ex.c /^v_ex_done(sp, vp)$/ v_exaddr ../vi/v_search.c /^v_exaddr(sp, vp, dir)$/ v_exec_ex ../vi/v_ex.c /^v_exec_ex(sp, vp, exp)$/ v_exmode ../vi/v_ex.c /^v_exmode(sp, vp)$/ v_filter ../vi/v_ex.c /^v_filter(sp, vp)$/ v_first ../vi/v_left.c /^v_first(sp, vp)$/ v_fmark ../vi/v_mark.c /^v_fmark(sp, vp)$/ v_home ../vi/v_scroll.c /^v_home(sp, vp)$/ v_hpagedown ../vi/v_scroll.c /^v_hpagedown(sp, vp)$/ v_hpageup ../vi/v_scroll.c /^v_hpageup(sp, vp)$/ v_iA ../vi/v_itxt.c /^v_iA(sp, vp)$/ v_iI ../vi/v_itxt.c /^v_iI(sp, vp)$/ v_iO ../vi/v_itxt.c /^v_iO(sp, vp)$/ v_ia ../vi/v_itxt.c /^v_ia(sp, vp)$/ v_ii ../vi/v_itxt.c /^v_ii(sp, vp)$/ v_increment ../vi/v_increment.c /^v_increment(sp, vp)$/ v_init ../vi/vi.c /^v_init(sp)$/ v_io ../vi/v_itxt.c /^v_io(sp, vp)$/ v_isempty ../vi/v_util.c /^v_isempty(p, len)$/ v_join ../vi/v_ex.c /^v_join(sp, vp)$/ v_key ../vi/vi.c /^v_key(sp, command_events, evp, ec_flags)$/ v_key_cmp ../common/key.c /^v_key_cmp(ap, bp)$/ v_key_ilookup ../common/key.c /^v_key_ilookup(sp)$/ v_key_init ../common/key.c /^v_key_init(sp)$/ v_key_len ../common/key.c /^v_key_len(sp, ch)$/ v_key_name ../common/key.c /^v_key_name(sp, ach)$/ v_key_val ../common/key.c /^v_key_val(sp, ch)$/ v_keyval ../common/key.c /^v_keyval(sp, val, name)$/ v_keyword ../vi/vi.c /^v_keyword(sp)$/ v_left ../vi/v_left.c /^v_left(sp, vp)$/ v_lgoto ../vi/v_scroll.c /^v_lgoto(sp, vp)$/ v_linedown ../vi/v_scroll.c /^v_linedown(sp, vp)$/ v_lineup ../vi/v_scroll.c /^v_lineup(sp, vp)$/ v_mark ../vi/v_mark.c /^v_mark(sp, vp)$/ v_match ../vi/v_match.c /^v_match(sp, vp)$/ v_middle ../vi/v_scroll.c /^v_middle(sp, vp)$/ v_motion ../vi/vi.c /^v_motion(sp, dm, vp, mappedp)$/ v_mulcase ../vi/v_ulcase.c /^v_mulcase(sp, vp)$/ v_ncol ../vi/v_left.c /^v_ncol(sp, vp)$/ v_nomove ../vi/v_util.c /^v_nomove(sp)$/ v_obsolete ../common/main.c /^v_obsolete(name, argv)$/ v_optchange ../vi/v_init.c /^v_optchange(sp, offset, str, valp)$/ v_pagedown ../vi/v_scroll.c /^v_pagedown(sp, vp)$/ v_pageup ../vi/v_scroll.c /^v_pageup(sp, vp)$/ v_paragraphb ../vi/v_paragraph.c /^v_paragraphb(sp, vp)$/ v_paragraphf ../vi/v_paragraph.c /^v_paragraphf(sp, vp)$/ v_put ../vi/v_put.c /^v_put(sp, vp)$/ v_redraw ../vi/v_redraw.c /^v_redraw(sp, vp)$/ v_replace ../vi/v_replace.c /^v_replace(sp, vp)$/ v_right ../vi/v_right.c /^v_right(sp, vp)$/ v_screen ../vi/v_screen.c /^v_screen(sp, vp)$/ v_screen_copy ../vi/v_init.c /^v_screen_copy(orig, sp)$/ v_screen_end ../vi/v_init.c /^v_screen_end(sp)$/ v_search ../vi/v_search.c /^v_search(sp, vp, ptrn, plen, flags, dir)$/ v_searchN ../vi/v_search.c /^v_searchN(sp, vp)$/ v_searchb ../vi/v_search.c /^v_searchb(sp, vp)$/ v_searchf ../vi/v_search.c /^v_searchf(sp, vp)$/ v_searchn ../vi/v_search.c /^v_searchn(sp, vp)$/ v_searchw ../vi/v_search.c /^v_searchw(sp, vp)$/ v_sectionb ../vi/v_section.c /^v_sectionb(sp, vp)$/ v_sectionf ../vi/v_section.c /^v_sectionf(sp, vp)$/ v_sentenceb ../vi/v_sentence.c /^v_sentenceb(sp, vp)$/ v_sentencef ../vi/v_sentence.c /^v_sentencef(sp, vp)$/ v_shiftl ../vi/v_ex.c /^v_shiftl(sp, vp)$/ v_shiftr ../vi/v_ex.c /^v_shiftr(sp, vp)$/ v_sof ../vi/v_util.c /^v_sof(sp, mp)$/ v_sol ../vi/v_util.c /^v_sol(sp)$/ v_status ../vi/v_status.c /^v_status(sp, vp)$/ v_strdup ../common/util.c /^v_strdup(sp, str, len)$/ v_subst ../vi/v_itxt.c /^v_subst(sp, vp)$/ v_suspend ../vi/v_ex.c /^v_suspend(sp, vp)$/ v_switch ../vi/v_ex.c /^v_switch(sp, vp)$/ v_sync ../common/key.c /^v_sync(sp, flags)$/ v_tagpop ../vi/v_ex.c /^v_tagpop(sp, vp)$/ v_tagpush ../vi/v_ex.c /^v_tagpush(sp, vp)$/ v_tcmd ../vi/v_txt.c /^v_tcmd(sp, vp, prompt, flags)$/ v_txt ../vi/v_txt.c /^v_txt(sp, vp, tm, lp, len, prompt, ai_line, rcount/ v_txt_auto ../vi/v_txt.c /^v_txt_auto(sp, lno, aitp, len, tp)$/ v_ulcase ../vi/v_ulcase.c /^v_ulcase(sp, vp)$/ v_undo ../vi/v_undo.c /^v_undo(sp, vp)$/ v_up ../vi/v_scroll.c /^v_up(sp, vp)$/ v_wordB ../vi/v_word.c /^v_wordB(sp, vp)$/ v_wordE ../vi/v_word.c /^v_wordE(sp, vp)$/ v_wordW ../vi/v_word.c /^v_wordW(sp, vp)$/ v_wordb ../vi/v_word.c /^v_wordb(sp, vp)$/ v_worde ../vi/v_word.c /^v_worde(sp, vp)$/ v_wordw ../vi/v_word.c /^v_wordw(sp, vp)$/ v_xchar ../vi/v_xchar.c /^v_xchar(sp, vp)$/ v_yank ../vi/v_yank.c /^v_yank(sp, vp)$/ v_z ../vi/v_z.c /^v_z(sp, vp)$/ v_zero ../vi/v_left.c /^v_zero(sp, vp)$/ v_zexit ../vi/v_zexit.c /^v_zexit(sp, vp)$/ vi ../vi/vi.c /^vi(spp)$/ vs_bg ../vi/vs_split.c /^vs_bg(sp)$/ vs_busy ../vi/vs_msg.c /^vs_busy(sp, msg, btype)$/ vs_change ../vi/vs_smap.c /^vs_change(sp, lno, op)$/ vs_colpos ../vi/vs_relative.c /^vs_colpos(sp, lno, cno)$/ vs_column ../vi/vs_relative.c /^vs_column(sp, colp)$/ vs_columns ../vi/vs_relative.c /^vs_columns(sp, lp, lno, cnop, diffp)$/ vs_crel ../vi/v_z.c /^vs_crel(sp, count)$/ vs_deleteln ../vi/vs_smap.c /^vs_deleteln(sp, cnt)$/ vs_discard ../vi/vs_split.c /^vs_discard(sp, spp)$/ vs_divider ../vi/vs_msg.c /^vs_divider(sp)$/ vs_ex_resolve ../vi/vs_msg.c /^vs_ex_resolve(sp, continuep)$/ vs_fg ../vi/vs_split.c /^vs_fg(sp, nspp, name, newscreen)$/ vs_getbg ../vi/vs_split.c /^vs_getbg(sp, name)$/ vs_home ../vi/vs_msg.c /^vs_home(sp)$/ vs_insertln ../vi/vs_smap.c /^vs_insertln(sp, cnt)$/ vs_line ../vi/vs_line.c /^vs_line(sp, smp, yp, xp)$/ vs_modeline ../vi/vs_refresh.c /^vs_modeline(sp)$/ vs_msg ../vi/vs_msg.c /^vs_msg(sp, mtype, line, len)$/ vs_msgsave ../vi/vs_msg.c /^vs_msgsave(sp, mt, p, len)$/ vs_number ../vi/vs_line.c /^vs_number(sp)$/ vs_output ../vi/vs_msg.c /^vs_output(sp, mtype, line, llen)$/ vs_paint ../vi/vs_refresh.c /^vs_paint(sp, flags)$/ vs_rcm ../vi/vs_relative.c /^vs_rcm(sp, lno, islast)$/ vs_refresh ../vi/vs_refresh.c /^vs_refresh(sp, forcepaint)$/ vs_repaint ../vi/vs_refresh.c /^vs_repaint(sp, evp)$/ vs_resize ../vi/vs_split.c /^vs_resize(sp, count, adj)$/ vs_resolve ../vi/vs_msg.c /^vs_resolve(sp, csp, forcewait)$/ vs_screens ../vi/vs_relative.c /^vs_screens(sp, lno, cnop)$/ vs_scroll ../vi/vs_msg.c /^vs_scroll(sp, continuep, wtype)$/ vs_sm_1down ../vi/vs_smap.c /^vs_sm_1down(sp)$/ vs_sm_1up ../vi/vs_smap.c /^vs_sm_1up(sp)$/ vs_sm_cursor ../vi/vs_smap.c /^vs_sm_cursor(sp, smpp)$/ vs_sm_delete ../vi/vs_smap.c /^vs_sm_delete(sp, lno)$/ vs_sm_down ../vi/vs_smap.c /^vs_sm_down(sp, rp, count, scmd, smp)$/ vs_sm_erase ../vi/vs_smap.c /^vs_sm_erase(sp)$/ vs_sm_fill ../vi/vs_smap.c /^vs_sm_fill(sp, lno, pos)$/ vs_sm_insert ../vi/vs_smap.c /^vs_sm_insert(sp, lno)$/ vs_sm_next ../vi/vs_smap.c /^vs_sm_next(sp, p, t)$/ vs_sm_nlines ../vi/vs_smap.c /^vs_sm_nlines(sp, from_sp, to_lno, max)$/ vs_sm_position ../vi/vs_smap.c /^vs_sm_position(sp, rp, cnt, pos)$/ vs_sm_prev ../vi/vs_smap.c /^vs_sm_prev(sp, p, t)$/ vs_sm_reset ../vi/vs_smap.c /^vs_sm_reset(sp, lno)$/ vs_sm_scroll ../vi/vs_smap.c /^vs_sm_scroll(sp, rp, count, scmd)$/ vs_sm_up ../vi/vs_smap.c /^vs_sm_up(sp, rp, count, scmd, smp)$/ vs_split ../vi/vs_split.c /^vs_split(sp, new, ccl)$/ vs_swap ../vi/vs_split.c /^vs_swap(sp, nspp, name)$/ vs_update ../vi/vs_msg.c /^vs_update(sp, m1, m2)$/ vs_wait ../vi/vs_msg.c /^vs_wait(sp, continuep, wtype)$/ vigor-0.016.orig/build/pathnames.h.in0100644000076400007640000000133507103707251016127 0ustar cjw44cjw44/* @(#)pathnames.h.in 8.4 (Berkeley) 6/26/96 */ #ifndef _PATH_BSHELL #define _PATH_BSHELL "@vi_cv_path_shell@" #endif #ifndef _PATH_EXRC #define _PATH_EXRC ".exrc" #endif #ifndef _PATH_MSGCAT #define _PATH_MSGCAT "./" #endif #ifndef _PATH_NEXRC #define _PATH_NEXRC ".nexrc" #endif #ifndef _PATH_PRESERVE #define _PATH_PRESERVE "@vi_cv_path_preserve@" #endif #ifndef _PATH_SYSV_PTY #define _PATH_SYSV_PTY "/dev/ptmx" #endif #ifndef _PATH_SENDMAIL #define _PATH_SENDMAIL "@vi_cv_path_sendmail@" #endif #ifndef _PATH_SYSEXRC #define _PATH_SYSEXRC "/etc/vi.exrc" #endif #ifndef _PATH_TAGS #define _PATH_TAGS "tags" #endif #ifndef _PATH_TMP #define _PATH_TMP "/tmp" #endif #ifndef _PATH_TTY #define _PATH_TTY "/dev/tty" #endif vigor-0.016.orig/build/distrib0100644000076400007640000000352707103707251014761 0ustar cjw44cjw44#! /bin/sh # @(#)distrib 8.11 (Berkeley) 10/23/96 # Clean #make -f Makefile.in clean #rm -f configure config.h.in # Build autoconf structure. echo "Running autoheader" autoheader 2>&1 | sed '/warning: AC_TRY_RUN called without default/d' chmod 444 config.h.in echo "Running autoconf" autoconf 2>&1 | sed '/warning: AC_TRY_RUN called without default/d' chmod 555 configure config.guess config.sub install-sh # Build include files. f=../include/cl_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../cl/*.c > $f chmod 444 $f f=../include/com_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../clib/*.c ../common/*.c > $f chmod 444 $f f=../include/ex_def.h echo "Building $f" rm -f $f awk -f ../ex/ex.awk ../ex/ex_cmd.c > $f chmod 444 $f f=../include/ex_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../ex/*.c > $f chmod 444 $f if [ -d ../ip ]; then f=../include/ip_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../ip/*.c > $f chmod 444 $f fi f=../include/options_def.h echo "Building $f" rm -f $f awk -f ../common/options.awk ../common/options.c > $f chmod 444 $f f=../include/perl_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../perl_api/*.xs ../perl_api/*.c > $f chmod 444 $f f=../include/tcl_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../tcl_api/*.c > $f chmod 444 $f f=../include/tk_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../tk/*.c > $f chmod 444 $f f=../include/vi_extern.h echo "Building $f" rm -f $f sed -n "s/^ \* PUBLIC: \(.*\)/\1/p" ../vi/*.c > $f chmod 444 $f # Build tags files. echo "Building tags files" rm -f tags ctags -w -d ../cl/*.[ch] ../common/*.[ch] ../ex/*.[ch] ../perl_api/*.[ch] \ ../tcl_api/*.[ch] ../tk/*.[ch] ../vi/*.[ch] chmod 444 tags vigor-0.016.orig/build/install-sh0100755000076400007640000001124307103707251015374 0ustar cjw44cjw44#!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. # # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" tranformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 vigor-0.016.orig/build/spell.ok0100644000076400007640000000055207103707251015043 0ustar cjw44cjw44ADDCPPFLAGS ADDLDFLAGS ADDLIBS CPPFLAGS FreeBSD LDFLAGS LIBS Lite NVI NVI'S NetBSD Nvi POSIX Perl README Tcl Tk asnvi asvi autoconf bindir cd contrib csh datadir datafiles db distclean env filesystem foo gcc ksh lcurses ldb lm lperl ltcl ltermcap ltermlib ltk mandir mkdir ncurses nex nvi nview perl perlinterp setenv sh tcl tclinterp tcsh terminfo tknvi usr vi vigor-0.016.orig/build/README.LynxOS0100644000076400007640000003504307103707252015450 0ustar cjw44cjw44README.LynxOS ============= Written by Ronald F. Guilmette Last modified Wed Aug 14 23:10:07 PDT 1996 ------------------------------------------ 0. Introduction --------------- This file describes how to build and install the Berkeley nvi editor for the LynxOS 2.4.0 operating system. LynxOS 2.4.0 is available for a variety of different hardware platforms, in particular, x86, m680x0, Sparc, and PowerPC. I have successfully built nvi on all four of these flavors of LynxOS by following the procedures given in this file. Note that these procedures may not work on versions of LynxOS prior to 2.4.0. (As I understand it, a good deal of work went into making the 2.4.0 release more POSIX-compliant, and I have no idea what build glitches, if any, you might encounter if you try to build nvi on a pre-2.4.0 version of LynxOS.) There are basically four steps to configuring, building, and installing nvi on LynxOS, namely: 1. Get setup to use the proper C compiler. 2. Replace your installed `tr' program. 3. Fix your system include files. 4. Do a normal configure, build, and install of nvi. These steps are described in separate sections below. 1. Get Setup to Use the Proper C Compiler ------------------------------------------ The first step when building nvi on LynxOS is to set your $PATH environment variable properly so that the gcc 2.x compiler appears first on your path, prior to the older (and less robust) gcc 1.xx compiler (typically installed as /bin/gcc) and/or the old Lynx proprietary C compiler (typically installed as /bin/cc), both of which may also be present on your system. Note that for most operating systems, the configure script for nvi tries to use whatever compiler you have installed (and in your $PATH) as "cc", however in the special case of LynxOS, the configure script will auto- matically try to find a "gcc" program on your $PATH in preference to a compiler called "cc". If the nvi configure script only find a compiler called "cc", that's OK. It will still try to see if that is really just the GNU C compiler installed under the name "cc". Regardless of the name however (be it "gcc" or "cc") the first C compiler in your $PATH should be some _recent_ (i.e. 2.0 or later) version of the GNU C compiler... and the nvi configure script now checks that this is the case, and fails if it isn't. Oddly enough, LynxOS 2.4.0 (and some prior versions) shipped with as many as three different C compilers installed, so it is important to set your $PATH environment variable carfully in order to get the proper C compiler to appear first in your $PATH. You want to avoid having either the /bin/gcc compiler or the /bin/cc compiler be the first C compiler in your $PATH. To make sure that the GNU C version 2.x compiler which was shipped with your LynxOS system appears first on your path, you will need to either set your $PATH variable (for sh/bash/ksh users) or your $path variable (for csh/tcsh users). You can, of course, just do this at the shell command prompt, but it is probably better to actually edit this change into your .profile file (for sh/bash/ksh users) or into your .cshrc file (for csh/tcsh users). The pathname of the directory that contains the GNU C version 2.x compiler is (unfortunately) dependent upon the exact type of LynxOS system you have. For LynxOS 2.4.0 on x86 systems, gcc 2.x is located in: /cygnus/94q4-lynxos-x86/bin For LynxOS 2.4.0 on m680x0 systems, gcc 2.x is located in: /cygnus/94q4-lynxos-68k/bin For LynxOS 2.4.0 on Sparc systems, gcc 2.x is located in: /cygnus/94q4-lynxos-usparc/bin For LynxOS 2.4.0 on PowerPC systems, gcc 2.x is located in: /cygnus/95q2-lynxos-ppc/bin (Note also that these locations may change in LynxOS 2.5.x and beyond.) Anyway, it is imperative that you setup your $PATH environment variable (*before* you do the configure step for nvi) so that the GNU C version 2.x compiler appears in your $PATH before either the /bin/cc or /bin/gcc compilers (if present). If you fail to do this, the configure step for nvi will fail, because the compiler script actually checks (now) that the compiler you are using (if your are on a LynxOS system) is gcc 2.0 or later. To make absolutely sure that you will be configuring and building nvi with the proper C compiler (i.e. the GNU C version 2.x compiler on your system) you should add the directory name listed above for your specific system type to your $PATH setting in your $HOME/.profile file. (For csh/tcsh users, you will instead want to add the relevant directory name to the setting of your $path variable in your ~/.cshrc file.) Once you have added the proper direc- tory name (from the list given above) to your $HOME/.profile file (or to your ~/.cshrc file, if you are using csh or tcsh) you should log out completely and then log back into the system just to make sure your new $PATH/$path setting takes effect properly. When you finish making this adjustment to your $PATH (or $path), the most up-to-date version of gcc on your system should be available to you as the first `gcc' program on your $PATH. You should verify that this is indeed the case simply by typing `gcc -v' and then checking the version number reported by the compiler. It should say either "2.6-94q4" or (on PowerPC systems) it should say "2.6-95q2". If you don't get these results, try again to set your $PATH (or $path) until you do. You won't be able to build nvi until you are properly setup to use gcc version 2.0 or later. Performing the steps shown above will insure that your subsequent configura- tion and build steps for nvi will make use of the most up-to-date version of gcc that was shipped with your Lynx operating system. (Note that the versions of gcc which are currently shipping with LynxOS 2.4.0 are also somewhat out- of-date themselves, but they are still quite a bit newer and more bug-free and ANSI conformant that those other two C compilers, /bin/cc and /bin/gcc, which also ship with LynxOS 2.4.0.) (Note: At present, LynxOS version 2.4.0 is the latest officially released version of LynxOS, and all of the above information is accurate and correct for LynxOS 2.4.0 as of the time of this writing. However it is rumored that future releases of LynxOS may provide a still newer version of gcc, and that it may be located in the /usr/bin directory. Thus, if you are building nvi for some LynxOS version later than 2.4.0, you may wish to check and see if your system has a program called /usr/bin/gcc, and use that version of gcc, if available, rather than the one suggested above.) 2. Replace Your Installed `tr' Program --------------------------------------- The `tr' program which comes bundled with LynxOS 2.4.0 (as /bin/tr) has a somewhat obscure bug which just happens to be tickled by almost all GNU `autoconf' generated `configure' scripts (including the one that nowadays comes bundled with nvi). Using the stock /bin/tr program on LynxOS when executing such `configure' scripts _will_ cause these scripts to malfunction in various ways. It is therefore imperative that you replace your LynxOS /bin/tr program with a properly working version of the `tr' command _before_ you even try to configure nvi. (You can tell if your `tr' program has the bug by executng the command "echo ab- | tr ab- ABC". If this yields the string "Ab-" then you have the bug. If it yields "ABC" then you don't.) You can obtain sources for a working version of the `tr' command as part of the GNU `textutils' package (the latest version of which, at the time of this writing, is 1.19). The GNU textutils package is available for downloading from prep.ai.mit.edu in the pub/gnu directory. Look for the file named textutils-1.19.tar.gz, or an even more recent version of textutils, if one is available. Fetch it, gunzip it, untar it, and follow the directions in the INSTALL file included in the tar file to build and install the entire textutils set of utility programs (which includes a working `tr' program). Then just make sure that the GNU version of `tr' appears on your $PATH _before_ the LynxOS version of `tr' (i.e. /bin/tr). Be sure to do this step _before_ you start to configure nvi. When building the textutils set of programs, I suggest that you use the most up-to-date C compiler available on your system (as described above). Also, note that it will be important for you to AVOID using the -O (optimize) compiler option when building the GNU textutils package, even if you are using the most up-to-date version of gcc which shipped with your system. If you try to use -O when building the textutils package on an x86 with the Cygnus 94q4 C compiler, you will end up with a `tr' program which will malfunction even worse than the one you are trying to replace! If you use -O when building the textutils package on LynxOS on the PowerPC (using the Cygnus 95q2 C compiler) you will just get yourself a compiler crash. So just don't use -O when building textutils. You can avoid using -O by in- voking make in the textutils directory as follows: make CFLAGS="-g" (Note: At present, LynxOS version 2.4.0 is the latest officially released version of LynxOS, and all of the above information is accurate and correct for LynxOS 2.4.0 as of the time of this writing. However it is rumored that the bug in the /bin/tr program will be fixed in future releases of LynxOS, so if you have a version of LynxOS later than 2.4.0, you may wish to check and see if your /bin/tr program even has the problematic bug before bothering with all of this.) 3. Fix Your System Include Files --------------------------------- If you are building nvi on a PowerPC system, it is also important that you apply the patches given at the end of this file to your /usr/include files. (Note that you will have to be root in order to do this.) Two of the patches included below fix a pair of serious bugs in the /usr/include/stdarg.h file on the PowerPC, and you really _do_ want to have these bugs fixed anyway, because without these fixes, anything that you compile which uses will very likely malfunction at run-time. Regardless of which LynxOS platform you are using (i.e. x86, PowerPC, Sparc, or m680x0) you may want to apply all of the system include files patches that are included below anyway. Doing so will clean up a few minor problems with the relevant system include files (i.e. , , and ) and this step will also prevent a few warnings which you would otherwise get during the build of nvi. You can apply all of the patches given at the end of this file simply by doing the following: su root cd /usr/include /bin/patch < this-file Where `this-file' is the actual full pathname of the file you are now reading, wherever it may reside on your own system. (Note: At present, LynxOS version 2.4.0 is the latest officially released version of LynxOS, and all of the above information is accurate and correct for LynxOS 2.4.0 as of the time of this writing. However it is rumored that future releases of LynxOS may incorporate some or all of the important system include file fixes provided below. Thus, if you are building nvi for some LynxOS version later than 2.4.0, you should probably go ahead and try to apply the patches given below to your system include files, and then just don't worry about it if these patches seem to have already been applied.) 4. A Brief Note about Sendmail ------------------------------- I should mention also that LynxOS does not normally ship with the `sendmail' mail transfer program installed, either under /usr/lib/ or anywhere else for that matter. This isn't really a big problem, but nvi normally wants and expects to have a sendmail program available so that it can send users notifi- cations (by mail) whenever a partially edited file is preserved by the editor in response to a sudden system crash, a sudden system shutdown, or an unexpect- ed serial-line hangup. You can configure and build nvi without any sendmail program installed on your system, but you will get warnings about its absence when you are doing the initial configure step prior to actually building nvi. If you want to have a fully-functional nvi which does send out notification messages (by mail) whenever partially edited files are preserved during a serial line hangup or system crash, then you should get the BSD sendmail sources (via ftp from ftp.cs.berkeley.edu), build and install sendmail, and then reconfigure, rebuild, and reinstall nvi. Please contact me at the E-mail address below if you experience any problems in building or using nvi on LynxOS. I make no guarrantees, but I may be willing to try to help. Ron Guilmette Roseville, California August 14, 1996 cut here for LynxOS 2.4.0 system include files patches ----------------------------------------------------------------------------- *** wait.h Fri Apr 26 10:02:45 1996 --- wait.h Sun May 19 05:36:50 1996 *************** *** 94,104 **** /* Function prototypes */ #ifndef __LYNXOS - #ifdef _POSIX_SOURCE extern pid_t wait _AP((int *)); extern pid_t waitpid _AP((pid_t, int *, int)); ! #else ! extern int wait _AP((union wait *)); ! extern int waitpid _AP((int, union wait *, int)); ! extern int wait3 _AP((union wait *, int, struct rusage *)); #endif #endif /* !__LYNXOS */ --- 94,101 ---- /* Function prototypes */ #ifndef __LYNXOS extern pid_t wait _AP((int *)); extern pid_t waitpid _AP((pid_t, int *, int)); ! #ifndef _POSIX_SOURCE ! extern int wait3 _AP((int *, int, struct rusage *)); #endif #endif /* !__LYNXOS */ *** ioctl.h Fri Apr 26 16:50:51 1996 --- ioctl.h Sat May 18 17:55:16 1996 *************** *** 572,576 **** #ifndef __LYNXOS ! extern int ioctl _AP((int, int, char *)); #endif --- 572,576 ---- #ifndef __LYNXOS ! extern int ioctl _AP((int, int, ...)); #endif *** stdarg.h Fri Apr 26 16:51:02 1996 --- stdarg.h Sat May 18 19:34:13 1996 *************** *** 88,92 **** (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) ! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg ())) void va_end(va_list); /* Defined in libgcc.a */ --- 88,92 ---- (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) ! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg (LASTARG))) void va_end(va_list); /* Defined in libgcc.a */ *************** *** 162,166 **** (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) ! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg ())) void va_end(va_list); /* Defined in libgcc.a */ --- 162,166 ---- (((sizeof(TYPE) + sizeof(int) - 1) / sizeof(int)) * sizeof(int)) ! #define va_start(AP, LASTARG) (AP = ((char *) __builtin_next_arg (LASTARG))) void va_end(va_list); /* Defined in libgcc.a */ vigor-0.016.orig/build/config.guess0100755000076400007640000003737407103707252015726 0ustar cjw44cjw44#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc. # # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Written by Per Bothner . # The master version of this file is at the FSF in /home/gd/gnu/lib. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit system type (host/target name). # # Only a few systems have been added to this list; please add others # (but try to keep the structure clean). # # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 8/24/94.) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15 # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in alpha:OSF1:V*:*) # After 1.2, OSF1 uses "V1.3" for uname -r. echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^V//'` exit 0 ;; alpha:OSF1:*:*) # 1.2 uses "1.2" for uname -r. echo alpha-dec-osf${UNAME_RELEASE} exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; amiga:NetBSD:*:*) echo m68k-cbm-netbsd${UNAME_RELEASE} exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; Pyramid*:OSx*:*:*) if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit 0 ;; sun4*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; i86pc:SunOS:5.*:*) echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; atari*:NetBSD:*:*) echo m68k-atari-netbsd${UNAME_RELEASE} exit 0 ;; sun3*:NetBSD:*:*) echo m68k-sun-netbsd${UNAME_RELEASE} exit 0 ;; mac68k:NetBSD:*:*) echo m68k-apple-netbsd${UNAME_RELEASE} exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; mips:*:4*:UMIPS) echo mips-mips-riscos4sysv exit 0 ;; mips:*:5*:RISCos) echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit 0 ;; AViiON:dgux:*:*) if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \ -o ${TARGET_BINARY_INTERFACE}x = x ] ; then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i?86:AIX:*:*) echo i386-ibm-aix exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then sed 's/^ //' << EOF >dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 rm -f dummy.c dummy echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit 0 ;; *:AIX:*:4) if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=4.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; 9000/[3478]??:HP-UX:*:*) case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/7?? | 9000/8?[79] ) HP_ARCH=hppa1.1 ;; 9000/8?? ) HP_ARCH=hppa1.0 ;; esac HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) sed 's/^ //' << EOF >dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0 rm -f dummy.c dummy echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; CRAY*X-MP:*:*:*) echo xmp-cray-unicos exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} exit 0 ;; CRAY*C90:*:*:*) echo c90-cray-unicos${UNAME_RELEASE} exit 0 ;; CRAY-2:*:*:*) echo cray2-cray-unicos exit 0 ;; hp3[0-9][05]:NetBSD:*:*) echo m68k-hp-netbsd${UNAME_RELEASE} exit 0 ;; i?86:BSD/386:*:* | *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; *:NetBSD:*:*) echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; *:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. ld_help_string=`ld --help 2>&1` if echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: elf_i?86"; then echo "${UNAME_MACHINE}-unknown-linux" ; exit 0 elif echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: i?86linux"; then echo "${UNAME_MACHINE}-unknown-linuxaout" ; exit 0 elif echo $ld_help_string | grep >/dev/null 2>&1 "supported emulations: i?86coff"; then echo "${UNAME_MACHINE}-unknown-linuxcoff" ; exit 0 elif test "${UNAME_MACHINE}" = "alpha" ; then echo alpha-unknown-linux ; exit 0 else # Either a pre-BFD a.out linker (linuxoldld) or one that does not give us # useful --help. Gcc wants to distinguish between linuxoldld and linuxaout. test ! -d /usr/lib/ldscripts/. \ && echo "${UNAME_MACHINE}-unknown-linuxoldld" && exit 0 # Determine whether the default compiler is a.out or elf cat >dummy.c </dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0 rm -f dummy.c dummy fi ;; # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions # are messed up and put the nodename in both sysname and nodename. i?86:DYNIX/ptx:4*:*) echo i386-sequent-sysv4 exit 0 ;; i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE} else echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; i?86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL else echo ${UNAME_MACHINE}-unknown-sysv32 fi exit 0 ;; Intel:Mach:3*:*) echo i386-unknown-mach3 exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit 0 ;; M680?0:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0) uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4.3 && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68*:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; i?86:LynxOS:2.*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; TSUNAMI:LynxOS:2.*:* | uSPARC2:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; PowerPC:LynxOS:2.*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; *FTX*) echo i860-stratus-sysv4 exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 cat >dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; printf ("%s-next-nextstep%s\n", __ARCHITECTURE__, version==2 ? "2" : "3"); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-unknown-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) #if !defined (ultrix) printf ("vax-dec-bsd\n"); exit (0); #else printf ("vax-dec-ultrix\n"); exit (0); #endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0 rm -f dummy.c dummy # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; c34*) echo c34-convex-bsd exit 0 ;; c38*) echo c38-convex-bsd exit 0 ;; c4*) echo c4-convex-bsd exit 0 ;; esac fi #echo '(Unable to guess system type)' 1>&2 exit 1 vigor-0.016.orig/build/config.h.in0100644000076400007640000001070207103707252015413 0ustar cjw44cjw44/* config.h.in. Generated automatically from configure.in by autoheader. */ /* Define to empty if the keyword does not work. */ #undef const /* Define if you have a working `mmap' system call. */ #undef HAVE_MMAP /* Define if your struct stat has st_blksize. */ #undef HAVE_ST_BLKSIZE /* Define if you have . */ #undef HAVE_VFORK_H /* Define to `int' if doesn't define. */ #undef mode_t /* Define to `long' if doesn't define. */ #undef off_t /* Define to `int' if doesn't define. */ #undef pid_t /* Define to `unsigned' if doesn't define. */ #undef size_t /* Define if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define if your declares struct tm. */ #undef TM_IN_SYS_TIME /* Define vfork as fork if vfork does not work. */ #undef vfork /* Define if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel and VAX). */ #undef WORDS_BIGENDIAN /* Define to `int' if doesn't define. */ #undef ssize_t /* Define if you want a debugging version. */ #undef DEBUG /* Define if you have a System V-style (broken) gettimeofday. */ #undef HAVE_BROKEN_GETTIMEOFDAY /* Define if you have a Ultrix-style (broken) vdisable. */ #undef HAVE_BROKEN_VDISABLE /* Define if you have a BSD version of curses. */ #undef HAVE_BSD_CURSES /* Define if you have the curses(3) addnstr function. */ #undef HAVE_CURSES_ADDNSTR /* Define if you have the curses(3) beep function. */ #undef HAVE_CURSES_BEEP /* Define if you have the curses(3) flash function. */ #undef HAVE_CURSES_FLASH /* Define if you have the curses(3) idlok function. */ #undef HAVE_CURSES_IDLOK /* Define if you have the curses(3) keypad function. */ #undef HAVE_CURSES_KEYPAD /* Define if you have the curses(3) newterm function. */ #undef HAVE_CURSES_NEWTERM /* Define if you have the curses(3) setupterm function. */ #undef HAVE_CURSES_SETUPTERM /* Define if you have the curses(3) tigetstr/tigetnum functions. */ #undef HAVE_CURSES_TIGETSTR /* Define if you have the chsize(2) system call. */ #undef HAVE_FTRUNCATE_CHSIZE /* Define if you have the ftruncate(2) system call. */ #undef HAVE_FTRUNCATE_FTRUNCATE /* Define if you have fcntl(2) style locking. */ #undef HAVE_LOCK_FCNTL /* Define if you have flock(2) style locking. */ #undef HAVE_LOCK_FLOCK /* Define if you want to compile in the Perl interpreter. */ #undef HAVE_PERL_INTERP /* Define if your Perl is at least 5.003_01. */ #undef HAVE_PERL_5_003_01 /* Define if you have the Berkeley style revoke(2) system call. */ #undef HAVE_REVOKE /* Define if you have */ #undef HAVE_SYS_MMAN_H /* Define if you have */ #undef HAVE_SYS_SELECT_H /* Define if you have the System V style pty calls. */ #undef HAVE_SYS5_PTY /* Define if you want to compile in the Tcl interpreter. */ #undef HAVE_TCL_INTERP /* Define if your sprintf returns a pointer, not a length. */ #undef SPRINTF_RET_CHARPNT /* Define if you have the bsearch function. */ #undef HAVE_BSEARCH /* Define if you have the gethostname function. */ #undef HAVE_GETHOSTNAME /* Define if you have the getopt function. */ #undef HAVE_GETOPT /* Define if you have the getpagesize function. */ #undef HAVE_GETPAGESIZE /* Define if you have the memchr function. */ #undef HAVE_MEMCHR /* Define if you have the memcpy function. */ #undef HAVE_MEMCPY /* Define if you have the memmove function. */ #undef HAVE_MEMMOVE /* Define if you have the memset function. */ #undef HAVE_MEMSET /* Define if you have the mkstemp function. */ #undef HAVE_MKSTEMP /* Define if you have the mmap function. */ #undef HAVE_MMAP /* Define if you have the select function. */ #undef HAVE_SELECT /* Define if you have the setenv function. */ #undef HAVE_SETENV /* Define if you have the snprintf function. */ #undef HAVE_SNPRINTF /* Define if you have the strdup function. */ #undef HAVE_STRDUP /* Define if you have the strerror function. */ #undef HAVE_STRERROR /* Define if you have the strpbrk function. */ #undef HAVE_STRPBRK /* Define if you have the strsep function. */ #undef HAVE_STRSEP /* Define if you have the strtol function. */ #undef HAVE_STRTOL /* Define if you have the strtoul function. */ #undef HAVE_STRTOUL /* Define if you have the unsetenv function. */ #undef HAVE_UNSETENV /* Define if you have the valloc function. */ #undef HAVE_VALLOC /* Define if you have the vsnprintf function. */ #undef HAVE_VSNPRINTF vigor-0.016.orig/build/recover.in0100644000076400007640000000220507103707252015364 0ustar cjw44cjw44#!/bin/sh - # # @(#)recover.in 8.8 (Berkeley) 10/10/96 # # Script to recover nvi edit sessions. RECDIR="@vi_cv_path_preserve@" SENDMAIL="@vi_cv_path_sendmail@" echo 'Recovering nvi editor sessions.' # Check editor backup files. vibackup=`echo $RECDIR/vi.*` if [ "$vibackup" != "$RECDIR/vi.*" ]; then for i in $vibackup; do # Only test files that are readable. if test ! -r $i; then continue fi # Unmodified nvi editor backup files either have the # execute bit set or are zero length. Delete them. if test -x $i -o ! -s $i; then rm $i fi done fi # It is possible to get incomplete recovery files, if the editor crashes # at the right time. virecovery=`echo $RECDIR/recover.*` if [ "$virecovery" != "$RECDIR/recover.*" ]; then for i in $virecovery; do # Only test files that are readable. if test ! -r $i; then continue fi # Delete any recovery files that are zero length, corrupted, # or that have no corresponding backup file. Else send mail # to the user. recfile=`awk '/^X-vi-recover-path:/{print $2}' < $i` if test -n "$recfile" -a -s "$recfile"; then $SENDMAIL -t < $i else rm $i fi done fi vigor-0.016.orig/build/aclocal.m40100644000076400007640000000120507103707252015226 0ustar cjw44cjw44AC_DEFUN(AM_SANITY_CHECK_CC, [dnl Derived from macros from Bruno Haible and from Cygnus. AC_MSG_CHECKING([whether the compiler ($CC $CFLAGS $LDFLAGS) actually works]) AC_LANG_SAVE AC_LANG_C AC_TRY_RUN([main() { exit(0); }], am_cv_prog_cc_works=yes, am_cv_prog_cc_works=no, dnl When crosscompiling, just try linking. AC_TRY_LINK([], [], am_cv_prog_cc_works=yes, am_cv_prog_cc_works=no)) AC_LANG_RESTORE case "$am_cv_prog_cc_works" in *no) AC_MSG_ERROR([Installation or configuration problem: C compiler cannot create executables.]) ;; *yes) ;; esac AC_MSG_RESULT(yes) ])dnl vigor-0.016.orig/build/config.sub0100755000076400007640000004321007103707252015353 0ustar cjw44cjw44#! /bin/sh # Configuration validation subroutine script, version 1.1. # Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # It is wrong to echo any other type of specification. if [ x$1 = x ] then echo Configuration name missing. 1>&2 echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 echo "or $0 ALIAS" 1>&2 echo where ALIAS is a recognized configuration type. 1>&2 exit 1 fi # First pass through any local machine types. case $1 in *local*) echo $1 exit 0 ;; *) ;; esac # Separate what the user gave into CPU-COMPANY and OS (if any). basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp ) os= basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. tahoe | i[345]86 | i860 | m68k | m68000 | m88k | ns32k | arm \ | arme[lb] | pyramid \ | tron | a29k | 580 | i960 | h8300 | hppa1.0 | hppa1.1 \ | alpha | we32k | ns16k | clipper | sparclite | i370 | sh \ | powerpc | powerpcle | sparc64 | 1750a | dsp16xx | mips64 | mipsel \ | pdp11 | mips64el | mips64orion | mips64orionel \ | sparc) basic_machine=$basic_machine-unknown ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. vax-* | tahoe-* | i[345]86-* | i860-* | m68k-* | m68000-* | m88k-* \ | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \ | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \ | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \ | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \ | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \ | mips64el-* | mips64orion-* | mips64orionel-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-cbm ;; amigados) basic_machine=m68k-cbm os=-amigados ;; amigaunix | amix) basic_machine=m68k-cbm os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; balance) basic_machine=ns32k-sequent os=-dynix ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | ymp) basic_machine=ymp-cray os=-unicos ;; cray2) basic_machine=cray2-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; i370-ibm* | ibm*) basic_machine=i370-ibm os=-mvs ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i[345]86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` os=-sysv32 ;; i[345]86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` os=-sysv4 ;; i[345]86v) basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` os=-sysv ;; i[345]86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'` os=-solaris2 ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; mac | macintosh) basic_machine=m68k-apple ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; miniframe) basic_machine=m68000-convergent ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; np1) basic_machine=np1-gould ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | p6) # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium basic_machine=i586-intel ;; pentium-* | p5-* | p6-*) # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; k5) # We don't have specific support for AMD's K5 yet, so just call it a Pentium basic_machine=i586-amd ;; nexen) # We don't have specific support for Nexgen yet, so just call it a Pentium basic_machine=i586-nexgen ;; pn) basic_machine=pn-gould ;; power) basic_machine=rs6000-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; symmetry) basic_machine=i386-sequent os=-dynix ;; tower | tower-32) basic_machine=m68k-ncr ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; xmp) basic_machine=xmp-cray os=-unicos ;; xps | xps100) basic_machine=xps100-honeywell ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. mips) basic_machine=mips-mips ;; romp) basic_machine=romp-ibm ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sparc) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -unixware* | svr4*) os=-sysv4 ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[345]* \ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigados* | -msdos* | -newsos* | -unicos* | -aos* \ | -nindy* | -vxworks* | -ebmon* | -hms* | -mvs* | -clix* \ | -riscos* | -linux* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* ) # Remember, each alternative MUST END IN *, to match a version number. ;; -aux*) ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -ctix* | -uts*) os=-sysv ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -xenix) os=-xenix ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-semi) os=-aout ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-ibm) os=-aix ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigados ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -hpux*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs*) vendor=ibm ;; -ptx*) vendor=sequent ;; -vxworks*) vendor=wrs ;; -aux*) vendor=apple ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os vigor-0.016.orig/build/VI.pm0100644000076400007640000000171707103707257014257 0ustar cjw44cjw44sub bootstrap {$curscr->bootstrap(@_)} sub PRINT {$curscr->PRINT(@_)} sub Msg {$curscr->Msg(@_)} sub EndScreen {$curscr->EndScreen(@_)} sub Edit {$curscr->Edit(@_)} sub NewScreen {$curscr->NewScreen(@_)} sub FindScreen {$curscr->FindScreen(@_)} sub AppendLine {$curscr->AppendLine(@_)} sub DelLine {$curscr->DelLine(@_)} sub GetLine {$curscr->GetLine(@_)} sub SetLine {$curscr->SetLine(@_)} sub InsertLine {$curscr->InsertLine(@_)} sub LastLine {$curscr->LastLine(@_)} sub GetMark {$curscr->GetMark(@_)} sub SetMark {$curscr->SetMark(@_)} sub GetCursor {$curscr->GetCursor(@_)} sub SetCursor {$curscr->SetCursor(@_)} sub SwitchScreen {$curscr->SwitchScreen(@_)} sub MapKey {$curscr->MapKey(@_)} sub UnmapKey {$curscr->UnmapKey(@_)} sub SetOpt {$curscr->SetOpt(@_)} sub GetOpt {$curscr->GetOpt(@_)} sub Run {$curscr->Run(@_)} sub DESTROY {$curscr->DESTROY(@_)} sub Warn {$curscr->Warn(@_)} sub Opt {$curscr->Opt(@_)} sub Map {$curscr->Map(@_)} sub Mark {$curscr->Mark(@_)} 1; vigor-0.016.orig/build/stamp-h.in0100644000076400007640000000000007103707260015256 0ustar cjw44cjw44vigor-0.016.orig/build/vigor.tcl.h0100664000076400007640000037373607103707261015475 0ustar cjw44cjw44static char vigor_tcl[] = { 0x23, 0x20, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x0a, 0x23, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x77, 0x61, 0x73, 0x20, 0x62, 0x6c, 0x61, 0x74, 0x61, 0x6e, 0x74, 0x6c, 0x79, 0x20, 0x73, 0x74, 0x6f, 0x6c, 0x65, 0x6e, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, 0x74, 0x68, 0x65, 0x20, 0x54, 0x43, 0x4c, 0x20, 0x46, 0x41, 0x51, 0x2e, 0x20, 0x20, 0x49, 0x74, 0x27, 0x73, 0x20, 0x72, 0x65, 0x6e, 0x61, 0x6d, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x70, 0x72, 0x65, 0x76, 0x65, 0x6e, 0x74, 0x0a, 0x23, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x6c, 0x61, 0x73, 0x68, 0x65, 0x73, 0x2e, 0x20, 0x20, 0x49, 0x74, 0x20, 0x73, 0x65, 0x65, 0x6d, 0x73, 0x20, 0x74, 0x6f, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x61, 0x20, 0x70, 0x6f, 0x6f, 0x72, 0x20, 0x64, 0x69, 0x73, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x69, 0x6f, 0x6e, 0x2c, 0x20, 0x73, 0x6f, 0x20, 0x49, 0x20, 0x6e, 0x65, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x66, 0x69, 0x6e, 0x64, 0x0a, 0x23, 0x20, 0x61, 0x20, 0x62, 0x65, 0x74, 0x74, 0x65, 0x72, 0x20, 0x6f, 0x6e, 0x65, 0x2e, 0x0a, 0x23, 0x20, 0x59, 0x65, 0x73, 0x2c, 0x20, 0x54, 0x43, 0x4c, 0x20, 0x38, 0x2e, 0x30, 0x20, 0x68, 0x61, 0x73, 0x20, 0x6f, 0x6e, 0x65, 0x20, 0x62, 0x75, 0x69, 0x6c, 0x74, 0x20, 0x69, 0x6e, 0x2e, 0x20, 0x20, 0x4e, 0x6f, 0x2c, 0x20, 0x49, 0x20, 0x64, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x72, 0x65, 0x71, 0x75, 0x69, 0x72, 0x65, 0x20, 0x74, 0x68, 0x61, 0x74, 0x2e, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x7b, 0x61, 0x72, 0x67, 0x73, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x67, 0x6c, 0x6f, 0x62, 0x61, 0x6c, 0x20, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x6d, 0x61, 0x78, 0x20, 0x32, 0x35, 0x39, 0x32, 0x30, 0x30, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x61, 0x72, 0x67, 0x63, 0x6e, 0x74, 0x20, 0x5b, 0x6c, 0x6c, 0x65, 0x6e, 0x67, 0x74, 0x68, 0x20, 0x24, 0x61, 0x72, 0x67, 0x73, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x7b, 0x20, 0x24, 0x61, 0x72, 0x67, 0x63, 0x6e, 0x74, 0x20, 0x3c, 0x20, 0x31, 0x20, 0x7c, 0x7c, 0x20, 0x24, 0x61, 0x72, 0x67, 0x63, 0x6e, 0x74, 0x20, 0x3e, 0x20, 0x32, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x65, 0x72, 0x72, 0x6f, 0x72, 0x20, 0x22, 0x77, 0x72, 0x6f, 0x6e, 0x67, 0x20, 0x23, 0x20, 0x61, 0x72, 0x67, 0x73, 0x3a, 0x20, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x6c, 0x69, 0x6d, 0x69, 0x74, 0x20, 0x7c, 0x20, 0x73, 0x65, 0x65, 0x64, 0x20, 0x3f, 0x73, 0x65, 0x65, 0x64, 0x76, 0x61, 0x6c, 0x3f, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x21, 0x5b, 0x73, 0x74, 0x72, 0x69, 0x6e, 0x67, 0x20, 0x63, 0x6f, 0x6d, 0x70, 0x61, 0x72, 0x65, 0x20, 0x5b, 0x6c, 0x69, 0x6e, 0x64, 0x65, 0x78, 0x20, 0x24, 0x61, 0x72, 0x67, 0x73, 0x20, 0x30, 0x5d, 0x20, 0x73, 0x65, 0x65, 0x64, 0x5d, 0x20, 0x7b, 0x0a, 0x09, 0x69, 0x66, 0x20, 0x7b, 0x20, 0x24, 0x61, 0x72, 0x67, 0x63, 0x6e, 0x74, 0x20, 0x3d, 0x3d, 0x20, 0x32, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x20, 0x5b, 0x6c, 0x69, 0x6e, 0x64, 0x65, 0x78, 0x20, 0x24, 0x61, 0x72, 0x67, 0x73, 0x20, 0x31, 0x5d, 0x0a, 0x09, 0x7d, 0x20, 0x65, 0x6c, 0x73, 0x65, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x20, 0x5b, 0x65, 0x78, 0x70, 0x72, 0x20, 0x5c, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x28, 0x5b, 0x70, 0x69, 0x64, 0x5d, 0x2b, 0x5b, 0x63, 0x6c, 0x6f, 0x63, 0x6b, 0x20, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x5d, 0x29, 0x25, 0x24, 0x6d, 0x61, 0x78, 0x5d, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x21, 0x5b, 0x69, 0x6e, 0x66, 0x6f, 0x20, 0x65, 0x78, 0x69, 0x73, 0x74, 0x73, 0x20, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x5d, 0x20, 0x7b, 0x0a, 0x09, 0x73, 0x65, 0x74, 0x20, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x20, 0x5b, 0x65, 0x78, 0x70, 0x72, 0x20, 0x28, 0x5b, 0x70, 0x69, 0x64, 0x5d, 0x2b, 0x5b, 0x63, 0x6c, 0x6f, 0x63, 0x6b, 0x20, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x5d, 0x29, 0x25, 0x24, 0x6d, 0x61, 0x78, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x20, 0x5b, 0x65, 0x78, 0x70, 0x72, 0x20, 0x28, 0x24, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x2a, 0x37, 0x31, 0x34, 0x31, 0x2b, 0x35, 0x34, 0x37, 0x37, 0x33, 0x29, 0x20, 0x25, 0x20, 0x24, 0x6d, 0x61, 0x78, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x20, 0x5b, 0x65, 0x78, 0x70, 0x72, 0x20, 0x69, 0x6e, 0x74, 0x28, 0x64, 0x6f, 0x75, 0x62, 0x6c, 0x65, 0x28, 0x24, 0x52, 0x4e, 0x47, 0x5f, 0x73, 0x65, 0x65, 0x64, 0x29, 0x2a, 0x5b, 0x6c, 0x69, 0x6e, 0x64, 0x65, 0x78, 0x20, 0x24, 0x61, 0x72, 0x67, 0x73, 0x20, 0x30, 0x5d, 0x2f, 0x24, 0x6d, 0x61, 0x78, 0x29, 0x5d, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x73, 0x65, 0x74, 0x75, 0x70, 0x5f, 0x62, 0x6f, 0x78, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x67, 0x6c, 0x6f, 0x62, 0x61, 0x6c, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x61, 0x6e, 0x69, 0x6d, 0x61, 0x74, 0x65, 0x5f, 0x62, 0x67, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x65, 0x73, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x61, 0x76, 0x5f, 0x30, 0x30, 0x30, 0x31, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x61, 0x76, 0x5f, 0x30, 0x30, 0x30, 0x32, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x61, 0x76, 0x5f, 0x30, 0x30, 0x30, 0x31, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x61, 0x76, 0x5f, 0x30, 0x30, 0x30, 0x32, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x61, 0x76, 0x5f, 0x30, 0x30, 0x30, 0x31, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x61, 0x76, 0x5f, 0x30, 0x30, 0x30, 0x32, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x74, 0x6f, 0x70, 0x6c, 0x65, 0x76, 0x65, 0x6c, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2d, 0x63, 0x6c, 0x61, 0x73, 0x73, 0x20, 0x44, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x53, 0x61, 0x79, 0x73, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x69, 0x63, 0x6f, 0x6e, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x53, 0x61, 0x79, 0x73, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x20, 0x32, 0x30, 0x30, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x63, 0x61, 0x6e, 0x76, 0x61, 0x73, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x77, 0x69, 0x64, 0x74, 0x68, 0x20, 0x31, 0x33, 0x36, 0x20, 0x2d, 0x68, 0x65, 0x69, 0x67, 0x68, 0x74, 0x20, 0x33, 0x34, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x2d, 0x2d, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x7b, 0x0a, 0x09, 0x22, 0x2b, 0x30, 0x2b, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x30, 0x20, 0x33, 0x34, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x20, 0x33, 0x34, 0x20, 0x33, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x33, 0x20, 0x36, 0x38, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x33, 0x34, 0x20, 0x31, 0x30, 0x32, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x70, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2b, 0x30, 0x2b, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x22, 0x2d, 0x30, 0x2b, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x31, 0x30, 0x32, 0x20, 0x33, 0x34, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x20, 0x36, 0x38, 0x20, 0x33, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x33, 0x20, 0x33, 0x34, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x33, 0x34, 0x20, 0x30, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x70, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2d, 0x30, 0x2b, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x22, 0x2b, 0x30, 0x2d, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x30, 0x20, 0x30, 0x20, 0x35, 0x31, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x30, 0x20, 0x33, 0x34, 0x20, 0x33, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x33, 0x30, 0x20, 0x36, 0x38, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x30, 0x20, 0x31, 0x30, 0x32, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x62, 0x6f, 0x74, 0x74, 0x6f, 0x6d, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2b, 0x30, 0x2d, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x22, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x31, 0x30, 0x32, 0x20, 0x30, 0x20, 0x35, 0x31, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x30, 0x20, 0x36, 0x38, 0x20, 0x33, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x33, 0x30, 0x20, 0x33, 0x34, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x30, 0x20, 0x30, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x62, 0x6f, 0x74, 0x74, 0x6f, 0x6d, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2d, 0x30, 0x2d, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x72, 0x65, 0x6c, 0x69, 0x65, 0x66, 0x20, 0x72, 0x61, 0x69, 0x73, 0x65, 0x64, 0x20, 0x2d, 0x62, 0x64, 0x20, 0x31, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x57, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x74, 0x68, 0x65, 0x20, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2c, 0x20, 0x62, 0x75, 0x74, 0x20, 0x64, 0x6f, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x70, 0x6f, 0x70, 0x75, 0x6c, 0x61, 0x74, 0x65, 0x20, 0x69, 0x74, 0x2e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x70, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x62, 0x6f, 0x74, 0x68, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x73, 0x65, 0x74, 0x75, 0x70, 0x20, 0x7b, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x73, 0x65, 0x74, 0x75, 0x70, 0x5f, 0x62, 0x6f, 0x78, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x6d, 0x65, 0x73, 0x73, 0x61, 0x67, 0x65, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6d, 0x73, 0x67, 0x20, 0x2d, 0x77, 0x69, 0x64, 0x74, 0x68, 0x20, 0x33, 0x69, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x24, 0x74, 0x65, 0x78, 0x74, 0x20, 0x5c, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2d, 0x66, 0x6f, 0x6e, 0x74, 0x20, 0x2d, 0x41, 0x64, 0x6f, 0x62, 0x65, 0x2d, 0x54, 0x69, 0x6d, 0x65, 0x73, 0x2d, 0x4d, 0x65, 0x64, 0x69, 0x75, 0x6d, 0x2d, 0x52, 0x2d, 0x4e, 0x6f, 0x72, 0x6d, 0x61, 0x6c, 0x2d, 0x2a, 0x2d, 0x31, 0x38, 0x30, 0x2d, 0x2a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6d, 0x73, 0x67, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x62, 0x6f, 0x74, 0x68, 0x20, 0x5c, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x62, 0x6c, 0x6f, 0x63, 0x6b, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x6f, 0x6c, 0x64, 0x46, 0x6f, 0x63, 0x75, 0x73, 0x20, 0x5b, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x67, 0x72, 0x61, 0x62, 0x20, 0x73, 0x65, 0x74, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x74, 0x6b, 0x77, 0x61, 0x69, 0x74, 0x20, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x61, 0x6e, 0x69, 0x6d, 0x61, 0x74, 0x65, 0x5f, 0x62, 0x67, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x61, 0x76, 0x5f, 0x30, 0x30, 0x30, 0x31, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x65, 0x73, 0x74, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x66, 0x6f, 0x63, 0x75, 0x73, 0x20, 0x24, 0x6f, 0x6c, 0x64, 0x46, 0x6f, 0x63, 0x75, 0x73, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x6d, 0x61, 0x79, 0x62, 0x65, 0x5f, 0x63, 0x6f, 0x6e, 0x66, 0x69, 0x72, 0x6d, 0x20, 0x7b, 0x20, 0x70, 0x72, 0x6f, 0x62, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x61, 0x6c, 0x20, 0x5b, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x31, 0x30, 0x30, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x7b, 0x20, 0x24, 0x76, 0x61, 0x6c, 0x20, 0x3e, 0x20, 0x24, 0x70, 0x72, 0x6f, 0x62, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x73, 0x65, 0x74, 0x75, 0x70, 0x20, 0x24, 0x74, 0x65, 0x78, 0x74, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6f, 0x6b, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x4f, 0x4b, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x43, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x61, 0x6b, 0x65, 0x20, 0x61, 0x64, 0x76, 0x61, 0x6e, 0x74, 0x61, 0x67, 0x65, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x65, 0x20, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x66, 0x65, 0x61, 0x74, 0x75, 0x72, 0x65, 0x2c, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6e, 0x65, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x75, 0x70, 0x67, 0x72, 0x61, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x68, 0x65, 0x20, 0x73, 0x65, 0x72, 0x76, 0x65, 0x72, 0x20, 0x65, 0x64, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x6f, 0x66, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x2e, 0x20, 0x20, 0x43, 0x6f, 0x6e, 0x74, 0x61, 0x63, 0x74, 0x20, 0x79, 0x6f, 0x75, 0x72, 0x20, 0x73, 0x61, 0x6c, 0x65, 0x73, 0x20, 0x72, 0x65, 0x70, 0x72, 0x65, 0x73, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x76, 0x65, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x69, 0x6e, 0x66, 0x6f, 0x72, 0x6d, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x5b, 0x20, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x35, 0x20, 0x5d, 0x20, 0x7b, 0x0a, 0x09, 0x22, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6f, 0x6b, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6f, 0x6b, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x09, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x62, 0x6c, 0x6f, 0x63, 0x6b, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x6d, 0x61, 0x79, 0x62, 0x65, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x20, 0x7b, 0x20, 0x70, 0x72, 0x6f, 0x62, 0x20, 0x77, 0x69, 0x7a, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x74, 0x61, 0x73, 0x6b, 0x30, 0x20, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x74, 0x68, 0x69, 0x73, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x20, 0x64, 0x65, 0x73, 0x63, 0x72, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x67, 0x6c, 0x6f, 0x62, 0x61, 0x6c, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x64, 0x65, 0x73, 0x63, 0x72, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x0a, 0x0a, 0x23, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x4d, 0x73, 0x67, 0x20, 0x31, 0x20, 0x22, 0x24, 0x70, 0x72, 0x6f, 0x62, 0x20, 0x63, 0x68, 0x61, 0x6e, 0x63, 0x65, 0x20, 0x6f, 0x66, 0x20, 0x77, 0x69, 0x6e, 0x6e, 0x69, 0x6e, 0x67, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x61, 0x6c, 0x20, 0x5b, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x31, 0x30, 0x30, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x7b, 0x20, 0x24, 0x76, 0x61, 0x6c, 0x20, 0x3e, 0x20, 0x24, 0x70, 0x72, 0x6f, 0x62, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x0a, 0x23, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x4d, 0x73, 0x67, 0x20, 0x31, 0x20, 0x22, 0x66, 0x6f, 0x6f, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x49, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x6e, 0x6f, 0x20, 0x69, 0x64, 0x65, 0x61, 0x20, 0x68, 0x6f, 0x77, 0x20, 0x74, 0x6f, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x63, 0x6c, 0x6f, 0x73, 0x75, 0x72, 0x65, 0x73, 0x20, 0x69, 0x6e, 0x20, 0x54, 0x63, 0x6c, 0x2c, 0x20, 0x73, 0x6f, 0x20, 0x77, 0x65, 0x20, 0x66, 0x61, 0x6b, 0x65, 0x20, 0x69, 0x74, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x67, 0x6c, 0x6f, 0x62, 0x61, 0x6c, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x64, 0x65, 0x73, 0x63, 0x72, 0x20, 0x24, 0x64, 0x65, 0x73, 0x63, 0x72, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x73, 0x65, 0x74, 0x75, 0x70, 0x20, 0x22, 0x49, 0x74, 0x20, 0x6c, 0x6f, 0x6f, 0x6b, 0x73, 0x20, 0x6c, 0x69, 0x6b, 0x65, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x61, 0x72, 0x65, 0x20, 0x24, 0x77, 0x69, 0x7a, 0x6e, 0x61, 0x6d, 0x65, 0x2e, 0x20, 0x20, 0x57, 0x68, 0x69, 0x63, 0x68, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x57, 0x68, 0x69, 0x7a, 0x7a, 0x65, 0x72, 0x20, 0x77, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6c, 0x69, 0x6b, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x75, 0x73, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x68, 0x65, 0x6c, 0x70, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x74, 0x68, 0x69, 0x73, 0x3f, 0x22, 0x0a, 0x23, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x4d, 0x73, 0x67, 0x20, 0x31, 0x20, 0x22, 0x6d, 0x61, 0x6e, 0x65, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x61, 0x73, 0x6b, 0x30, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x30, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x64, 0x65, 0x73, 0x63, 0x72, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x74, 0x68, 0x65, 0x6e, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6e, 0x65, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x69, 0x6e, 0x76, 0x6f, 0x6b, 0x65, 0x20, 0x74, 0x68, 0x65, 0x20, 0x5c, 0x22, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x5c, 0x22, 0x20, 0x57, 0x68, 0x69, 0x7a, 0x7a, 0x65, 0x72, 0x2e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x74, 0x68, 0x65, 0x6e, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6e, 0x65, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x69, 0x6e, 0x76, 0x6f, 0x6b, 0x65, 0x20, 0x74, 0x68, 0x65, 0x20, 0x5c, 0x22, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x5c, 0x22, 0x20, 0x57, 0x68, 0x69, 0x7a, 0x7a, 0x65, 0x72, 0x2e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x22, 0x43, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x22, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x61, 0x6b, 0x65, 0x20, 0x61, 0x64, 0x76, 0x61, 0x6e, 0x74, 0x61, 0x67, 0x65, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x65, 0x20, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x66, 0x65, 0x61, 0x74, 0x75, 0x72, 0x65, 0x2c, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x6e, 0x65, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x75, 0x70, 0x67, 0x72, 0x61, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x68, 0x65, 0x20, 0x73, 0x65, 0x72, 0x76, 0x65, 0x72, 0x20, 0x65, 0x64, 0x69, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x6f, 0x66, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x2e, 0x20, 0x20, 0x43, 0x6f, 0x6e, 0x74, 0x61, 0x63, 0x74, 0x20, 0x79, 0x6f, 0x75, 0x72, 0x20, 0x73, 0x61, 0x6c, 0x65, 0x73, 0x20, 0x72, 0x65, 0x70, 0x72, 0x65, 0x73, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x76, 0x65, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x69, 0x6e, 0x66, 0x6f, 0x72, 0x6d, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2e, 0x22, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x5f, 0x64, 0x65, 0x73, 0x63, 0x72, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x23, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x4d, 0x73, 0x67, 0x20, 0x31, 0x20, 0x22, 0x70, 0x61, 0x64, 0x6d, 0x65, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x61, 0x73, 0x6b, 0x30, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x46, 0x49, 0x58, 0x4d, 0x45, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x64, 0x6f, 0x65, 0x73, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x73, 0x65, 0x65, 0x6d, 0x20, 0x74, 0x6f, 0x20, 0x77, 0x6f, 0x72, 0x6b, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x2e, 0x20, 0x20, 0x54, 0x68, 0x65, 0x20, 0x22, 0x43, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x22, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x69, 0x73, 0x20, 0x61, 0x6c, 0x77, 0x61, 0x79, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x6f, 0x6e, 0x20, 0x74, 0x68, 0x65, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x2e, 0x20, 0x20, 0x49, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x6c, 0x69, 0x74, 0x74, 0x6c, 0x65, 0x20, 0x63, 0x6f, 0x6e, 0x63, 0x65, 0x72, 0x6e, 0x20, 0x6f, 0x76, 0x65, 0x72, 0x20, 0x73, 0x75, 0x63, 0x68, 0x20, 0x74, 0x68, 0x69, 0x6e, 0x67, 0x73, 0x2c, 0x20, 0x74, 0x68, 0x6f, 0x75, 0x67, 0x68, 0x2c, 0x20, 0x77, 0x68, 0x65, 0x6e, 0x20, 0x74, 0x68, 0x69, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x69, 0x73, 0x20, 0x6e, 0x6f, 0x77, 0x20, 0x74, 0x68, 0x65, 0x20, 0x66, 0x6f, 0x75, 0x72, 0x74, 0x68, 0x20, 0x6d, 0x6f, 0x6e, 0x74, 0x68, 0x20, 0x6f, 0x66, 0x20, 0x61, 0x20, 0x77, 0x65, 0x65, 0x6b, 0x65, 0x6e, 0x64, 0x20, 0x68, 0x61, 0x63, 0x6b, 0x2e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x5b, 0x20, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x35, 0x20, 0x5d, 0x20, 0x7b, 0x0a, 0x09, 0x22, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x63, 0x61, 0x6e, 0x63, 0x65, 0x6c, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x09, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x0a, 0x23, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x4d, 0x73, 0x67, 0x20, 0x31, 0x20, 0x22, 0x68, 0x75, 0x6d, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x62, 0x6c, 0x6f, 0x63, 0x6b, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6e, 0x66, 0x69, 0x72, 0x6d, 0x20, 0x7b, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x6d, 0x61, 0x79, 0x62, 0x65, 0x5f, 0x63, 0x6f, 0x6e, 0x66, 0x69, 0x72, 0x6d, 0x20, 0x31, 0x30, 0x30, 0x20, 0x24, 0x74, 0x65, 0x78, 0x74, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x20, 0x7b, 0x20, 0x77, 0x69, 0x7a, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x74, 0x61, 0x73, 0x6b, 0x30, 0x20, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x74, 0x68, 0x69, 0x73, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x20, 0x64, 0x65, 0x73, 0x63, 0x72, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x46, 0x49, 0x58, 0x4d, 0x45, 0x20, 0x49, 0x20, 0x6b, 0x6e, 0x6f, 0x77, 0x20, 0x74, 0x68, 0x65, 0x72, 0x65, 0x27, 0x73, 0x20, 0x61, 0x20, 0x62, 0x65, 0x74, 0x74, 0x65, 0x72, 0x20, 0x77, 0x61, 0x79, 0x2e, 0x20, 0x20, 0x49, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x64, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x72, 0x65, 0x6d, 0x65, 0x6d, 0x62, 0x65, 0x72, 0x20, 0x69, 0x74, 0x20, 0x6e, 0x6f, 0x77, 0x2c, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x72, 0x65, 0x61, 0x6c, 0x6c, 0x79, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x66, 0x69, 0x6e, 0x69, 0x73, 0x68, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x67, 0x65, 0x74, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x20, 0x73, 0x6c, 0x65, 0x65, 0x70, 0x2e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x6d, 0x61, 0x79, 0x62, 0x65, 0x5f, 0x77, 0x69, 0x7a, 0x61, 0x72, 0x64, 0x20, 0x31, 0x30, 0x30, 0x20, 0x24, 0x77, 0x69, 0x7a, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x30, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x31, 0x20, 0x24, 0x74, 0x61, 0x73, 0x6b, 0x32, 0x20, 0x24, 0x74, 0x68, 0x69, 0x73, 0x5f, 0x74, 0x61, 0x73, 0x6b, 0x20, 0x24, 0x64, 0x65, 0x73, 0x63, 0x72, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x69, 0x6e, 0x74, 0x20, 0x7b, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6e, 0x66, 0x69, 0x72, 0x6d, 0x20, 0x24, 0x74, 0x65, 0x78, 0x74, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x7b, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x73, 0x65, 0x74, 0x75, 0x70, 0x20, 0x24, 0x74, 0x65, 0x78, 0x74, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6f, 0x6b, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x4f, 0x4b, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6f, 0x6b, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x62, 0x6c, 0x6f, 0x63, 0x6b, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x75, 0x6c, 0x61, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x73, 0x65, 0x74, 0x75, 0x70, 0x5f, 0x62, 0x6f, 0x78, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x2d, 0x72, 0x65, 0x6c, 0x69, 0x65, 0x66, 0x20, 0x72, 0x61, 0x69, 0x73, 0x65, 0x64, 0x20, 0x2d, 0x62, 0x64, 0x20, 0x32, 0x20, 0x2d, 0x79, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x23, 0x20, 0x46, 0x49, 0x58, 0x4d, 0x45, 0x20, 0x46, 0x6f, 0x72, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x20, 0x72, 0x65, 0x61, 0x73, 0x6f, 0x6e, 0x2c, 0x20, 0x69, 0x66, 0x20, 0x77, 0x65, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x68, 0x65, 0x72, 0x65, 0x2c, 0x0a, 0x09, 0x23, 0x20, 0x69, 0x74, 0x20, 0x67, 0x6f, 0x65, 0x73, 0x20, 0x68, 0x79, 0x73, 0x74, 0x65, 0x72, 0x69, 0x63, 0x61, 0x6c, 0x2e, 0x20, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x65, 0x76, 0x65, 0x6e, 0x20, 0x68, 0x61, 0x70, 0x70, 0x65, 0x6e, 0x73, 0x20, 0x69, 0x66, 0x20, 0x61, 0x20, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x27, 0x73, 0x20, 0x77, 0x6f, 0x72, 0x74, 0x68, 0x0a, 0x09, 0x23, 0x20, 0x6f, 0x66, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x27, 0x73, 0x20, 0x61, 0x72, 0x65, 0x20, 0x65, 0x61, 0x74, 0x65, 0x6e, 0x20, 0x62, 0x79, 0x20, 0x74, 0x68, 0x65, 0x20, 0x6c, 0x61, 0x67, 0x20, 0x63, 0x6f, 0x64, 0x65, 0x2e, 0x20, 0x20, 0x44, 0x6f, 0x65, 0x73, 0x20, 0x61, 0x6e, 0x79, 0x62, 0x6f, 0x64, 0x79, 0x20, 0x6b, 0x6e, 0x6f, 0x77, 0x20, 0x77, 0x68, 0x79, 0x3f, 0x0a, 0x09, 0x23, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x09, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x79, 0x76, 0x69, 0x65, 0x77, 0x20, 0x30, 0x0a, 0x09, 0x23, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x65, 0x61, 0x74, 0x73, 0x20, 0x74, 0x68, 0x65, 0x20, 0x6f, 0x75, 0x74, 0x70, 0x75, 0x74, 0x20, 0x6f, 0x66, 0x20, 0x79, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x2d, 0x72, 0x65, 0x6c, 0x69, 0x65, 0x66, 0x20, 0x72, 0x61, 0x69, 0x73, 0x65, 0x64, 0x20, 0x2d, 0x62, 0x64, 0x20, 0x32, 0x20, 0x2d, 0x79, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x22, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x20, 0x73, 0x65, 0x74, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x62, 0x61, 0x72, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x22, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x79, 0x76, 0x69, 0x65, 0x77, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x69, 0x6e, 0x64, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x20, 0x3c, 0x45, 0x6e, 0x74, 0x65, 0x72, 0x3e, 0x20, 0x7b, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x79, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x45, 0x4e, 0x44, 0x2d, 0x55, 0x53, 0x45, 0x52, 0x20, 0x4c, 0x49, 0x43, 0x45, 0x4e, 0x53, 0x45, 0x20, 0x41, 0x47, 0x52, 0x45, 0x45, 0x4d, 0x45, 0x4e, 0x54, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x49, 0x4d, 0x50, 0x4f, 0x52, 0x54, 0x41, 0x4e, 0x54, 0x2d, 0x52, 0x45, 0x41, 0x44, 0x20, 0x43, 0x41, 0x52, 0x45, 0x46, 0x55, 0x4c, 0x4c, 0x59, 0x3a, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x54, 0x68, 0x69, 0x73, 0x20, 0x45, 0x6e, 0x64, 0x2d, 0x55, 0x73, 0x65, 0x72, 0x20, 0x4c, 0x69, 0x63, 0x65, 0x6e, 0x73, 0x65, 0x20, 0x41, 0x67, 0x72, 0x65, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x28, 0x5c, 0x22, 0x45, 0x55, 0x4c, 0x41, 0x5c, 0x22, 0x29, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x69, 0x73, 0x20, 0x4e, 0x4f, 0x54, 0x20, 0x61, 0x20, 0x6c, 0x65, 0x67, 0x61, 0x6c, 0x20, 0x61, 0x67, 0x72, 0x65, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x62, 0x65, 0x74, 0x77, 0x65, 0x65, 0x6e, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x28, 0x65, 0x69, 0x74, 0x68, 0x65, 0x72, 0x20, 0x61, 0x6e, 0x20, 0x69, 0x6e, 0x64, 0x69, 0x76, 0x69, 0x64, 0x75, 0x61, 0x6c, 0x20, 0x6f, 0x72, 0x20, 0x61, 0x20, 0x73, 0x69, 0x6e, 0x67, 0x6c, 0x65, 0x20, 0x65, 0x6e, 0x74, 0x69, 0x74, 0x79, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x73, 0x6f, 0x20, 0x74, 0x61, 0x6b, 0x65, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x46, 0x61, 0x72, 0x65, 0x29, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x74, 0x68, 0x65, 0x72, 0x20, 0x75, 0x6e, 0x6e, 0x61, 0x6d, 0x65, 0x64, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x65, 0x6e, 0x74, 0x69, 0x74, 0x79, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x77, 0x68, 0x61, 0x74, 0x65, 0x76, 0x65, 0x72, 0x20, 0x70, 0x72, 0x6f, 0x64, 0x75, 0x63, 0x74, 0x20, 0x77, 0x65, 0x20, 0x66, 0x65, 0x65, 0x6c, 0x20, 0x6c, 0x69, 0x6b, 0x65, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x69, 0x74, 0x20, 0x61, 0x70, 0x70, 0x6c, 0x69, 0x65, 0x73, 0x20, 0x74, 0x6f, 0x2e, 0x20, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x69, 0x6e, 0x63, 0x6c, 0x75, 0x64, 0x65, 0x73, 0x20, 0x6d, 0x65, 0x64, 0x69, 0x61, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x70, 0x72, 0x69, 0x6e, 0x74, 0x65, 0x64, 0x20, 0x6d, 0x61, 0x74, 0x65, 0x72, 0x69, 0x61, 0x6c, 0x73, 0x2c, 0x20, 0x6f, 0x6e, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x6f, 0x72, 0x20, 0x65, 0x6c, 0x65, 0x63, 0x74, 0x72, 0x6f, 0x6e, 0x69, 0x63, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65, 0x6e, 0x74, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x2c, 0x20, 0x70, 0x72, 0x6f, 0x64, 0x75, 0x63, 0x74, 0x73, 0x20, 0x70, 0x75, 0x72, 0x63, 0x68, 0x61, 0x73, 0x65, 0x64, 0x20, 0x62, 0x65, 0x63, 0x61, 0x75, 0x73, 0x65, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x6f, 0x66, 0x20, 0x6f, 0x72, 0x20, 0x75, 0x73, 0x65, 0x64, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x74, 0x68, 0x65, 0x20, 0x70, 0x72, 0x6f, 0x64, 0x75, 0x63, 0x74, 0x2c, 0x20, 0x6f, 0x72, 0x20, 0x61, 0x6e, 0x79, 0x74, 0x68, 0x69, 0x6e, 0x67, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x68, 0x61, 0x74, 0x20, 0x68, 0x61, 0x70, 0x70, 0x65, 0x6e, 0x73, 0x20, 0x74, 0x6f, 0x20, 0x62, 0x65, 0x20, 0x6e, 0x65, 0x61, 0x72, 0x62, 0x79, 0x20, 0x28, 0x5c, 0x22, 0x53, 0x4f, 0x46, 0x54, 0x57, 0x41, 0x52, 0x45, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x50, 0x52, 0x4f, 0x44, 0x55, 0x43, 0x54, 0x5c, 0x22, 0x29, 0x2e, 0x20, 0x20, 0x42, 0x79, 0x20, 0x69, 0x6e, 0x73, 0x74, 0x61, 0x6c, 0x6c, 0x69, 0x6e, 0x67, 0x2c, 0x20, 0x63, 0x6f, 0x70, 0x79, 0x69, 0x6e, 0x67, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x64, 0x6f, 0x77, 0x6e, 0x6c, 0x6f, 0x61, 0x64, 0x69, 0x6e, 0x67, 0x2c, 0x20, 0x61, 0x63, 0x63, 0x65, 0x73, 0x73, 0x69, 0x6e, 0x67, 0x2c, 0x20, 0x75, 0x73, 0x69, 0x6e, 0x67, 0x2c, 0x20, 0x74, 0x68, 0x69, 0x6e, 0x6b, 0x69, 0x6e, 0x67, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x61, 0x62, 0x6f, 0x75, 0x74, 0x2c, 0x20, 0x68, 0x65, 0x61, 0x72, 0x69, 0x6e, 0x67, 0x20, 0x6f, 0x66, 0x2c, 0x20, 0x6f, 0x72, 0x20, 0x62, 0x65, 0x69, 0x6e, 0x67, 0x20, 0x69, 0x6e, 0x20, 0x74, 0x68, 0x65, 0x20, 0x73, 0x61, 0x6d, 0x65, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x75, 0x6e, 0x69, 0x76, 0x65, 0x72, 0x73, 0x65, 0x20, 0x61, 0x73, 0x20, 0x74, 0x68, 0x65, 0x20, 0x53, 0x4f, 0x46, 0x54, 0x57, 0x41, 0x52, 0x45, 0x20, 0x50, 0x52, 0x4f, 0x44, 0x55, 0x43, 0x54, 0x2c, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x61, 0x67, 0x72, 0x65, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x62, 0x65, 0x20, 0x62, 0x6f, 0x75, 0x6e, 0x64, 0x20, 0x62, 0x79, 0x20, 0x74, 0x68, 0x65, 0x20, 0x74, 0x65, 0x72, 0x6d, 0x73, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x45, 0x55, 0x4c, 0x41, 0x2e, 0x20, 0x20, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x64, 0x6f, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x61, 0x67, 0x72, 0x65, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x68, 0x65, 0x20, 0x74, 0x65, 0x72, 0x6d, 0x73, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x45, 0x55, 0x4c, 0x41, 0x2c, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x63, 0x61, 0x6e, 0x20, 0x74, 0x72, 0x79, 0x20, 0x74, 0x6f, 0x20, 0x67, 0x65, 0x74, 0x20, 0x79, 0x6f, 0x75, 0x72, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x6d, 0x6f, 0x6e, 0x65, 0x79, 0x20, 0x62, 0x61, 0x63, 0x6b, 0x2c, 0x20, 0x62, 0x75, 0x74, 0x20, 0x6c, 0x65, 0x74, 0x27, 0x73, 0x20, 0x66, 0x61, 0x63, 0x65, 0x20, 0x69, 0x74, 0x2c, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x61, 0x69, 0x6e, 0x27, 0x74, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x67, 0x6f, 0x6e, 0x6e, 0x61, 0x20, 0x68, 0x61, 0x70, 0x70, 0x65, 0x6e, 0x20, 0x61, 0x6e, 0x79, 0x77, 0x61, 0x79, 0x2c, 0x20, 0x73, 0x6f, 0x20, 0x77, 0x68, 0x79, 0x20, 0x62, 0x6f, 0x74, 0x68, 0x65, 0x72, 0x3f, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x53, 0x4f, 0x46, 0x54, 0x57, 0x41, 0x52, 0x45, 0x20, 0x50, 0x52, 0x4f, 0x44, 0x55, 0x43, 0x54, 0x20, 0x4c, 0x49, 0x43, 0x45, 0x4e, 0x53, 0x45, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x54, 0x68, 0x65, 0x20, 0x53, 0x4f, 0x46, 0x54, 0x57, 0x41, 0x52, 0x45, 0x20, 0x50, 0x52, 0x4f, 0x44, 0x55, 0x43, 0x54, 0x20, 0x69, 0x73, 0x20, 0x70, 0x72, 0x6f, 0x74, 0x65, 0x63, 0x74, 0x65, 0x64, 0x20, 0x62, 0x79, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x63, 0x6f, 0x70, 0x79, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x6c, 0x61, 0x77, 0x73, 0x2c, 0x20, 0x69, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x61, 0x74, 0x69, 0x6f, 0x6e, 0x61, 0x6c, 0x20, 0x63, 0x6f, 0x70, 0x79, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x72, 0x65, 0x61, 0x74, 0x69, 0x65, 0x73, 0x2c, 0x20, 0x73, 0x65, 0x76, 0x65, 0x72, 0x61, 0x6c, 0x20, 0x76, 0x61, 0x67, 0x75, 0x65, 0x6c, 0x79, 0x20, 0x64, 0x65, 0x66, 0x69, 0x6e, 0x65, 0x64, 0x20, 0x49, 0x50, 0x4f, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x6c, 0x61, 0x77, 0x73, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x74, 0x72, 0x65, 0x61, 0x74, 0x69, 0x65, 0x73, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x61, 0x72, 0x65, 0x20, 0x65, 0x61, 0x73, 0x69, 0x6c, 0x79, 0x20, 0x63, 0x6c, 0x6f, 0x75, 0x64, 0x65, 0x64, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x69, 0x6e, 0x20, 0x61, 0x20, 0x63, 0x6f, 0x75, 0x72, 0x74, 0x20, 0x6f, 0x66, 0x20, 0x6c, 0x61, 0x77, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x61, 0x20, 0x67, 0x75, 0x79, 0x20, 0x6e, 0x61, 0x6d, 0x65, 0x64, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x42, 0x75, 0x62, 0x62, 0x61, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x61, 0x20, 0x73, 0x68, 0x6f, 0x74, 0x67, 0x75, 0x6e, 0x2e, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x46, 0x49, 0x58, 0x4d, 0x45, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x70, 0x61, 0x72, 0x61, 0x67, 0x72, 0x61, 0x70, 0x68, 0x20, 0x6e, 0x65, 0x65, 0x64, 0x73, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x20, 0x77, 0x6f, 0x72, 0x6b, 0x2e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x31, 0x2e, 0x20, 0x47, 0x52, 0x41, 0x4e, 0x54, 0x20, 0x4f, 0x46, 0x20, 0x4c, 0x49, 0x43, 0x45, 0x4e, 0x53, 0x45, 0x2e, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x45, 0x55, 0x4c, 0x41, 0x20, 0x67, 0x72, 0x61, 0x6e, 0x74, 0x73, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x68, 0x65, 0x20, 0x66, 0x6f, 0x6c, 0x6c, 0x6f, 0x77, 0x69, 0x6e, 0x67, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x73, 0x3a, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x2a, 0x20, 0x54, 0x68, 0x65, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x64, 0x6f, 0x20, 0x77, 0x68, 0x61, 0x74, 0x65, 0x76, 0x65, 0x72, 0x20, 0x74, 0x68, 0x65, 0x20, 0x70, 0x75, 0x62, 0x6c, 0x69, 0x73, 0x68, 0x65, 0x72, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x73, 0x61, 0x79, 0x73, 0x2e, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x2a, 0x20, 0x4e, 0x6f, 0x74, 0x68, 0x69, 0x6e, 0x67, 0x20, 0x65, 0x6c, 0x73, 0x65, 0x2e, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x46, 0x49, 0x58, 0x4d, 0x45, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x70, 0x61, 0x72, 0x61, 0x67, 0x72, 0x61, 0x70, 0x68, 0x20, 0x6e, 0x65, 0x65, 0x64, 0x73, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x20, 0x77, 0x6f, 0x72, 0x6b, 0x20, 0x74, 0x6f, 0x6f, 0x2e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x32, 0x2e, 0x20, 0x52, 0x45, 0x53, 0x50, 0x4f, 0x4e, 0x53, 0x49, 0x42, 0x49, 0x4c, 0x49, 0x54, 0x49, 0x45, 0x53, 0x20, 0x4f, 0x46, 0x20, 0x54, 0x48, 0x45, 0x20, 0x55, 0x53, 0x45, 0x52, 0x2e, 0x20, 0x20, 0x42, 0x79, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x61, 0x67, 0x72, 0x65, 0x65, 0x69, 0x6e, 0x67, 0x20, 0x74, 0x6f, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x6c, 0x69, 0x63, 0x65, 0x6e, 0x73, 0x65, 0x2c, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x61, 0x67, 0x72, 0x65, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x68, 0x65, 0x20, 0x66, 0x6f, 0x6c, 0x6c, 0x6f, 0x77, 0x69, 0x6e, 0x67, 0x3a, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x69, 0x73, 0x20, 0x77, 0x68, 0x65, 0x72, 0x65, 0x20, 0x69, 0x74, 0x20, 0x63, 0x75, 0x74, 0x73, 0x20, 0x6f, 0x66, 0x66, 0x20, 0x6f, 0x6e, 0x20, 0x61, 0x20, 0x31, 0x30, 0x32, 0x34, 0x78, 0x37, 0x36, 0x38, 0x20, 0x64, 0x69, 0x73, 0x70, 0x6c, 0x61, 0x79, 0x2e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x2a, 0x20, 0x47, 0x69, 0x76, 0x65, 0x20, 0x74, 0x68, 0x65, 0x20, 0x70, 0x72, 0x6f, 0x76, 0x69, 0x64, 0x65, 0x72, 0x20, 0x79, 0x6f, 0x75, 0x72, 0x20, 0x66, 0x69, 0x72, 0x73, 0x74, 0x62, 0x6f, 0x72, 0x6e, 0x20, 0x73, 0x6f, 0x6e, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x73, 0x68, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x74, 0x68, 0x65, 0x20, 0x70, 0x72, 0x6f, 0x76, 0x69, 0x64, 0x65, 0x72, 0x20, 0x64, 0x65, 0x65, 0x6d, 0x20, 0x73, 0x75, 0x63, 0x68, 0x20, 0x69, 0x73, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x6e, 0x65, 0x63, 0x65, 0x73, 0x73, 0x61, 0x72, 0x79, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x76, 0x61, 0x6c, 0x75, 0x61, 0x62, 0x6c, 0x65, 0x2e, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x2a, 0x20, 0x42, 0x65, 0x63, 0x6f, 0x6d, 0x65, 0x20, 0x42, 0x69, 0x6c, 0x6c, 0x27, 0x73, 0x20, 0x74, 0x6f, 0x77, 0x65, 0x6c, 0x20, 0x62, 0x6f, 0x79, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x6c, 0x69, 0x66, 0x65, 0x2e, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x2a, 0x20, 0x57, 0x68, 0x61, 0x74, 0x65, 0x76, 0x65, 0x72, 0x20, 0x65, 0x6c, 0x73, 0x65, 0x20, 0x77, 0x65, 0x20, 0x74, 0x68, 0x69, 0x6e, 0x6b, 0x20, 0x6f, 0x66, 0x20, 0x6c, 0x61, 0x74, 0x65, 0x72, 0x20, 0x6f, 0x6e, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x79, 0x6f, 0x75, 0x20, 0x61, 0x6c, 0x72, 0x65, 0x61, 0x64, 0x79, 0x20, 0x61, 0x67, 0x72, 0x65, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, 0x74, 0x68, 0x65, 0x20, 0x73, 0x68, 0x72, 0x69, 0x6e, 0x6b, 0x2d, 0x77, 0x72, 0x61, 0x70, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x6c, 0x69, 0x63, 0x65, 0x6e, 0x73, 0x65, 0x20, 0x61, 0x6e, 0x79, 0x77, 0x61, 0x79, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x54, 0x48, 0x49, 0x53, 0x20, 0x54, 0x45, 0x43, 0x48, 0x4e, 0x4f, 0x4c, 0x4f, 0x47, 0x59, 0x20, 0x49, 0x53, 0x20, 0x4e, 0x4f, 0x54, 0x20, 0x46, 0x41, 0x55, 0x4c, 0x54, 0x20, 0x54, 0x4f, 0x4c, 0x45, 0x52, 0x41, 0x4e, 0x54, 0x20, 0x41, 0x4e, 0x44, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x49, 0x53, 0x20, 0x4e, 0x4f, 0x54, 0x20, 0x44, 0x45, 0x53, 0x49, 0x47, 0x4e, 0x45, 0x44, 0x2c, 0x20, 0x4d, 0x41, 0x4e, 0x55, 0x46, 0x41, 0x43, 0x54, 0x55, 0x52, 0x45, 0x44, 0x2c, 0x20, 0x4f, 0x52, 0x20, 0x49, 0x4e, 0x54, 0x45, 0x4e, 0x44, 0x45, 0x44, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x46, 0x4f, 0x52, 0x20, 0x55, 0x53, 0x45, 0x20, 0x4f, 0x52, 0x20, 0x52, 0x45, 0x53, 0x41, 0x4c, 0x45, 0x20, 0x41, 0x53, 0x20, 0x4f, 0x4e, 0x2d, 0x4c, 0x49, 0x4e, 0x45, 0x20, 0x43, 0x4f, 0x4e, 0x54, 0x52, 0x4f, 0x4c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x45, 0x51, 0x55, 0x49, 0x50, 0x4d, 0x45, 0x4e, 0x54, 0x20, 0x49, 0x4e, 0x20, 0x48, 0x41, 0x5a, 0x41, 0x52, 0x44, 0x4f, 0x55, 0x53, 0x20, 0x45, 0x4e, 0x56, 0x49, 0x52, 0x4f, 0x4e, 0x4d, 0x45, 0x4e, 0x54, 0x53, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x52, 0x45, 0x51, 0x55, 0x49, 0x52, 0x49, 0x4e, 0x47, 0x20, 0x46, 0x41, 0x49, 0x4c, 0x2d, 0x53, 0x41, 0x46, 0x45, 0x20, 0x50, 0x45, 0x52, 0x46, 0x4f, 0x52, 0x4d, 0x41, 0x4e, 0x43, 0x45, 0x2c, 0x20, 0x53, 0x55, 0x43, 0x48, 0x20, 0x41, 0x53, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x54, 0x48, 0x45, 0x20, 0x4f, 0x50, 0x45, 0x52, 0x41, 0x54, 0x49, 0x4f, 0x4e, 0x20, 0x4f, 0x46, 0x20, 0x4e, 0x55, 0x43, 0x4c, 0x45, 0x41, 0x52, 0x20, 0x46, 0x41, 0x43, 0x49, 0x4c, 0x49, 0x54, 0x49, 0x45, 0x53, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x41, 0x49, 0x52, 0x43, 0x52, 0x41, 0x46, 0x54, 0x20, 0x4e, 0x41, 0x56, 0x49, 0x47, 0x41, 0x54, 0x49, 0x4f, 0x4e, 0x20, 0x4f, 0x52, 0x20, 0x43, 0x4f, 0x4d, 0x4d, 0x55, 0x4e, 0x49, 0x43, 0x41, 0x54, 0x49, 0x4f, 0x4e, 0x53, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x53, 0x59, 0x53, 0x54, 0x45, 0x4d, 0x53, 0x2c, 0x20, 0x41, 0x49, 0x52, 0x20, 0x54, 0x52, 0x41, 0x46, 0x46, 0x49, 0x43, 0x20, 0x43, 0x4f, 0x4e, 0x54, 0x52, 0x4f, 0x4c, 0x2c, 0x20, 0x44, 0x49, 0x52, 0x45, 0x43, 0x54, 0x20, 0x4c, 0x49, 0x46, 0x45, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x53, 0x55, 0x50, 0x50, 0x4f, 0x52, 0x54, 0x20, 0x4d, 0x41, 0x43, 0x48, 0x49, 0x4e, 0x45, 0x53, 0x2c, 0x20, 0x57, 0x45, 0x41, 0x50, 0x4f, 0x4e, 0x53, 0x20, 0x53, 0x59, 0x53, 0x54, 0x45, 0x4d, 0x53, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x49, 0x4e, 0x54, 0x45, 0x52, 0x4e, 0x45, 0x54, 0x20, 0x53, 0x45, 0x52, 0x56, 0x49, 0x43, 0x45, 0x20, 0x50, 0x52, 0x4f, 0x56, 0x49, 0x44, 0x45, 0x52, 0x53, 0x2c, 0x20, 0x54, 0x45, 0x43, 0x48, 0x4e, 0x49, 0x43, 0x41, 0x4c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x53, 0x55, 0x50, 0x50, 0x4f, 0x52, 0x54, 0x20, 0x4c, 0x49, 0x4e, 0x45, 0x53, 0x2c, 0x20, 0x4e, 0x45, 0x54, 0x57, 0x4f, 0x52, 0x4b, 0x20, 0x4f, 0x50, 0x45, 0x52, 0x41, 0x54, 0x49, 0x4f, 0x4e, 0x53, 0x20, 0x43, 0x45, 0x4e, 0x54, 0x45, 0x52, 0x53, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x49, 0x4e, 0x20, 0x57, 0x48, 0x49, 0x43, 0x48, 0x20, 0x54, 0x48, 0x45, 0x20, 0x46, 0x41, 0x49, 0x4c, 0x55, 0x52, 0x45, 0x20, 0x4f, 0x46, 0x20, 0x54, 0x48, 0x45, 0x20, 0x54, 0x45, 0x43, 0x48, 0x4e, 0x4f, 0x4c, 0x4f, 0x47, 0x59, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x4f, 0x52, 0x20, 0x4e, 0x4f, 0x52, 0x4d, 0x41, 0x4c, 0x20, 0x44, 0x41, 0x59, 0x2d, 0x54, 0x4f, 0x2d, 0x44, 0x41, 0x59, 0x20, 0x4f, 0x50, 0x45, 0x52, 0x41, 0x54, 0x49, 0x4f, 0x4e, 0x53, 0x20, 0x43, 0x4f, 0x55, 0x4c, 0x44, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x4c, 0x45, 0x41, 0x44, 0x20, 0x44, 0x49, 0x52, 0x45, 0x43, 0x54, 0x4c, 0x59, 0x20, 0x54, 0x4f, 0x20, 0x44, 0x45, 0x41, 0x54, 0x48, 0x2c, 0x20, 0x50, 0x45, 0x52, 0x53, 0x4f, 0x4e, 0x41, 0x4c, 0x20, 0x49, 0x4e, 0x4a, 0x55, 0x52, 0x59, 0x2c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x4f, 0x52, 0x20, 0x53, 0x45, 0x56, 0x45, 0x52, 0x45, 0x20, 0x50, 0x48, 0x59, 0x53, 0x49, 0x43, 0x41, 0x4c, 0x20, 0x4f, 0x52, 0x20, 0x45, 0x4e, 0x56, 0x49, 0x52, 0x4f, 0x4e, 0x4d, 0x45, 0x4e, 0x54, 0x41, 0x4c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x44, 0x41, 0x4d, 0x41, 0x47, 0x45, 0x2e, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x4c, 0x49, 0x4d, 0x49, 0x54, 0x45, 0x44, 0x20, 0x57, 0x41, 0x52, 0x52, 0x41, 0x4e, 0x54, 0x59, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x59, 0x6f, 0x75, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x6e, 0x6f, 0x20, 0x77, 0x61, 0x72, 0x72, 0x61, 0x6e, 0x74, 0x79, 0x20, 0x72, 0x69, 0x67, 0x68, 0x74, 0x73, 0x20, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x61, 0x67, 0x72, 0x65, 0x65, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x77, 0x68, 0x61, 0x74, 0x73, 0x6f, 0x65, 0x76, 0x65, 0x72, 0x2c, 0x20, 0x65, 0x78, 0x70, 0x72, 0x65, 0x73, 0x73, 0x65, 0x64, 0x20, 0x6f, 0x72, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x69, 0x6d, 0x70, 0x6c, 0x69, 0x65, 0x64, 0x2e, 0x20, 0x20, 0x57, 0x65, 0x20, 0x64, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x68, 0x65, 0x61, 0x72, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x69, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x27, 0x76, 0x65, 0x20, 0x67, 0x6f, 0x74, 0x20, 0x61, 0x6e, 0x79, 0x20, 0x70, 0x72, 0x6f, 0x62, 0x6c, 0x65, 0x6d, 0x73, 0x2e, 0x20, 0x20, 0x57, 0x65, 0x20, 0x64, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x67, 0x69, 0x76, 0x65, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x61, 0x20, 0x6e, 0x75, 0x6d, 0x62, 0x65, 0x72, 0x20, 0x74, 0x6f, 0x20, 0x63, 0x61, 0x6c, 0x6c, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x72, 0x65, 0x61, 0x73, 0x6f, 0x6e, 0x2e, 0x20, 0x20, 0x59, 0x6f, 0x75, 0x27, 0x76, 0x65, 0x20, 0x67, 0x6f, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x63, 0x61, 0x6c, 0x6c, 0x20, 0x74, 0x68, 0x65, 0x20, 0x70, 0x6f, 0x6f, 0x72, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x73, 0x63, 0x68, 0x6d, 0x75, 0x63, 0x6b, 0x20, 0x77, 0x68, 0x6f, 0x20, 0x73, 0x6f, 0x6c, 0x64, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x74, 0x6f, 0x20, 0x79, 0x6f, 0x75, 0x3b, 0x20, 0x74, 0x68, 0x65, 0x79, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x73, 0x75, 0x70, 0x70, 0x6f, 0x72, 0x74, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x74, 0x68, 0x65, 0x6d, 0x73, 0x65, 0x6c, 0x76, 0x65, 0x73, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x77, 0x65, 0x20, 0x77, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x68, 0x65, 0x6c, 0x70, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x68, 0x65, 0x6d, 0x2e, 0x20, 0x20, 0x57, 0x65, 0x20, 0x64, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x63, 0x61, 0x72, 0x65, 0x2e, 0x20, 0x20, 0x57, 0x65, 0x20, 0x64, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x6f, 0x2e, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x27, 0x72, 0x65, 0x20, 0x72, 0x65, 0x61, 0x64, 0x69, 0x6e, 0x67, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x62, 0x65, 0x63, 0x61, 0x75, 0x73, 0x65, 0x20, 0x69, 0x74, 0x27, 0x73, 0x20, 0x62, 0x65, 0x69, 0x6e, 0x67, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x64, 0x69, 0x73, 0x70, 0x6c, 0x61, 0x79, 0x65, 0x64, 0x20, 0x61, 0x73, 0x20, 0x70, 0x61, 0x72, 0x74, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x65, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x73, 0x74, 0x61, 0x72, 0x74, 0x75, 0x70, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x73, 0x65, 0x71, 0x75, 0x65, 0x6e, 0x63, 0x65, 0x2c, 0x20, 0x74, 0x68, 0x65, 0x6e, 0x20, 0x70, 0x6c, 0x65, 0x61, 0x73, 0x65, 0x20, 0x6c, 0x65, 0x74, 0x20, 0x6d, 0x65, 0x20, 0x6b, 0x6e, 0x6f, 0x77, 0x20, 0x62, 0x79, 0x20, 0x65, 0x6d, 0x61, 0x69, 0x6c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x61, 0x74, 0x20, 0x6a, 0x6f, 0x65, 0x6c, 0x68, 0x40, 0x67, 0x6e, 0x75, 0x2e, 0x6f, 0x72, 0x67, 0x2e, 0x20, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x20, 0x62, 0x6f, 0x78, 0x20, 0x69, 0x73, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x69, 0x6e, 0x74, 0x65, 0x6e, 0x64, 0x65, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x62, 0x65, 0x20, 0x6c, 0x6f, 0x6e, 0x67, 0x20, 0x65, 0x6e, 0x6f, 0x75, 0x67, 0x68, 0x20, 0x73, 0x6f, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x69, 0x74, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x77, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x62, 0x65, 0x20, 0x64, 0x69, 0x73, 0x70, 0x6c, 0x61, 0x79, 0x65, 0x64, 0x20, 0x6f, 0x6e, 0x20, 0x74, 0x68, 0x65, 0x20, 0x73, 0x63, 0x72, 0x65, 0x65, 0x6e, 0x2e, 0x5c, 0x6e, 0x5c, 0x6e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x45, 0x78, 0x63, 0x65, 0x70, 0x74, 0x69, 0x6f, 0x6e, 0x3a, 0x20, 0x49, 0x20, 0x6b, 0x6e, 0x6f, 0x77, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x63, 0x61, 0x6e, 0x20, 0x63, 0x6c, 0x69, 0x63, 0x6b, 0x20, 0x69, 0x6e, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x68, 0x65, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x62, 0x6f, 0x78, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x74, 0x68, 0x65, 0x6e, 0x20, 0x68, 0x6f, 0x6c, 0x64, 0x20, 0x64, 0x6f, 0x77, 0x6e, 0x20, 0x74, 0x68, 0x65, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x64, 0x6f, 0x77, 0x6e, 0x20, 0x61, 0x72, 0x72, 0x6f, 0x77, 0x20, 0x6b, 0x65, 0x79, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x74, 0x68, 0x75, 0x73, 0x20, 0x62, 0x79, 0x70, 0x61, 0x73, 0x73, 0x20, 0x74, 0x68, 0x65, 0x20, 0x73, 0x63, 0x72, 0x6f, 0x6c, 0x6c, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x6f, 0x76, 0x65, 0x72, 0x72, 0x69, 0x64, 0x65, 0x73, 0x2e, 0x20, 0x20, 0x49, 0x27, 0x6c, 0x6c, 0x20, 0x66, 0x69, 0x67, 0x75, 0x72, 0x65, 0x20, 0x6f, 0x75, 0x74, 0x20, 0x61, 0x20, 0x77, 0x61, 0x79, 0x20, 0x74, 0x6f, 0x20, 0x6b, 0x65, 0x65, 0x70, 0x20, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x6e, 0x73, 0x65, 0x72, 0x74, 0x20, 0x65, 0x6e, 0x64, 0x20, 0x22, 0x74, 0x68, 0x61, 0x74, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, 0x68, 0x61, 0x70, 0x70, 0x65, 0x6e, 0x69, 0x6e, 0x67, 0x20, 0x6c, 0x61, 0x74, 0x65, 0x72, 0x2e, 0x22, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x75, 0x74, 0x74, 0x6f, 0x6e, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6f, 0x6b, 0x20, 0x2d, 0x74, 0x65, 0x78, 0x74, 0x20, 0x22, 0x49, 0x20, 0x41, 0x63, 0x63, 0x65, 0x70, 0x74, 0x22, 0x20, 0x2d, 0x63, 0x6f, 0x6d, 0x6d, 0x61, 0x6e, 0x64, 0x20, 0x7b, 0x0a, 0x09, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x2e, 0x6f, 0x6b, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x2d, 0x65, 0x78, 0x70, 0x61, 0x6e, 0x64, 0x20, 0x31, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x78, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x70, 0x61, 0x64, 0x79, 0x20, 0x33, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x78, 0x20, 0x32, 0x6d, 0x20, 0x2d, 0x69, 0x70, 0x61, 0x64, 0x79, 0x20, 0x31, 0x6d, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x64, 0x6c, 0x67, 0x5f, 0x62, 0x6c, 0x6f, 0x63, 0x6b, 0x0a, 0x7d, 0x0a, 0x0a, 0x23, 0x20, 0x46, 0x6f, 0x72, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x20, 0x72, 0x65, 0x61, 0x73, 0x6f, 0x6e, 0x2c, 0x20, 0x74, 0x68, 0x65, 0x20, 0x77, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x20, 0x69, 0x73, 0x6e, 0x27, 0x74, 0x20, 0x6d, 0x6f, 0x76, 0x69, 0x6e, 0x67, 0x20, 0x65, 0x76, 0x65, 0x72, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x20, 0x69, 0x74, 0x20, 0x73, 0x68, 0x6f, 0x75, 0x6c, 0x64, 0x2e, 0x20, 0x20, 0x49, 0x20, 0x68, 0x61, 0x76, 0x65, 0x6e, 0x27, 0x74, 0x0a, 0x23, 0x20, 0x79, 0x65, 0x74, 0x20, 0x66, 0x69, 0x67, 0x75, 0x72, 0x65, 0x64, 0x20, 0x6f, 0x75, 0x74, 0x20, 0x77, 0x68, 0x79, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x69, 0x73, 0x2e, 0x20, 0x20, 0x49, 0x20, 0x74, 0x68, 0x69, 0x6e, 0x6b, 0x20, 0x74, 0x68, 0x65, 0x72, 0x65, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65, 0x20, 0x61, 0x6e, 0x20, 0x69, 0x73, 0x73, 0x75, 0x65, 0x20, 0x77, 0x69, 0x74, 0x68, 0x20, 0x74, 0x68, 0x65, 0x0a, 0x23, 0x20, 0x77, 0x68, 0x69, 0x6c, 0x65, 0x20, 0x74, 0x65, 0x73, 0x74, 0x2c, 0x20, 0x62, 0x75, 0x74, 0x20, 0x49, 0x27, 0x6d, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x73, 0x75, 0x72, 0x65, 0x2e, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x67, 0x6c, 0x6f, 0x62, 0x61, 0x6c, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x6f, 0x6c, 0x64, 0x69, 0x74, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x7b, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x6f, 0x6c, 0x64, 0x69, 0x74, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x69, 0x73, 0x20, 0x61, 0x20, 0x6c, 0x61, 0x67, 0x20, 0x74, 0x6f, 0x20, 0x6b, 0x65, 0x65, 0x70, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, 0x67, 0x6f, 0x69, 0x6e, 0x67, 0x20, 0x68, 0x79, 0x73, 0x74, 0x65, 0x72, 0x69, 0x63, 0x61, 0x6c, 0x20, 0x69, 0x66, 0x20, 0x69, 0x74, 0x20, 0x67, 0x65, 0x74, 0x73, 0x20, 0x63, 0x6f, 0x6e, 0x73, 0x74, 0x61, 0x6e, 0x74, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x20, 0x63, 0x61, 0x6c, 0x6c, 0x73, 0x2e, 0x20, 0x20, 0x28, 0x54, 0x68, 0x69, 0x73, 0x20, 0x68, 0x61, 0x70, 0x70, 0x65, 0x6e, 0x65, 0x64, 0x20, 0x61, 0x74, 0x20, 0x6f, 0x6e, 0x65, 0x20, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x20, 0x69, 0x6e, 0x20, 0x74, 0x68, 0x65, 0x20, 0x45, 0x55, 0x4c, 0x41, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x49, 0x27, 0x6d, 0x20, 0x6e, 0x6f, 0x74, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x73, 0x75, 0x72, 0x65, 0x20, 0x77, 0x68, 0x79, 0x2e, 0x29, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x6f, 0x6c, 0x64, 0x69, 0x74, 0x20, 0x31, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x61, 0x66, 0x74, 0x65, 0x72, 0x20, 0x35, 0x30, 0x30, 0x20, 0x7b, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x6f, 0x6c, 0x64, 0x69, 0x74, 0x20, 0x30, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x6f, 0x6c, 0x64, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x73, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x2d, 0x2d, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x7b, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x77, 0x68, 0x69, 0x6c, 0x65, 0x20, 0x7b, 0x20, 0x24, 0x6f, 0x6c, 0x64, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x3d, 0x3d, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x73, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x5b, 0x20, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x34, 0x20, 0x5d, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x22, 0x30, 0x22, 0x20, 0x7b, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x22, 0x2d, 0x30, 0x2b, 0x30, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x22, 0x31, 0x22, 0x20, 0x7b, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x22, 0x2d, 0x30, 0x2d, 0x30, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x22, 0x32, 0x22, 0x20, 0x7b, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x22, 0x2b, 0x30, 0x2d, 0x30, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x20, 0x7b, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x22, 0x2b, 0x30, 0x2b, 0x30, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x7b, 0x20, 0x21, 0x20, 0x5b, 0x20, 0x77, 0x69, 0x6e, 0x66, 0x6f, 0x20, 0x65, 0x78, 0x69, 0x73, 0x74, 0x73, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x5d, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x57, 0x65, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x61, 0x20, 0x64, 0x69, 0x61, 0x6c, 0x6f, 0x67, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x73, 0x68, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x6d, 0x6f, 0x76, 0x65, 0x64, 0x2e, 0x20, 0x20, 0x57, 0x65, 0x20, 0x72, 0x65, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x61, 0x20, 0x66, 0x61, 0x69, 0x72, 0x20, 0x62, 0x69, 0x74, 0x20, 0x6f, 0x66, 0x20, 0x69, 0x74, 0x2e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x20, 0x32, 0x30, 0x30, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x75, 0x6e, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x75, 0x6e, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x63, 0x61, 0x6e, 0x76, 0x61, 0x73, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x77, 0x69, 0x64, 0x74, 0x68, 0x20, 0x31, 0x33, 0x36, 0x20, 0x2d, 0x68, 0x65, 0x69, 0x67, 0x68, 0x74, 0x20, 0x33, 0x34, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x2d, 0x2d, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x7b, 0x0a, 0x09, 0x22, 0x2b, 0x30, 0x2b, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x30, 0x20, 0x33, 0x34, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x20, 0x33, 0x34, 0x20, 0x33, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x33, 0x20, 0x36, 0x38, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x33, 0x34, 0x20, 0x31, 0x30, 0x32, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x70, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2b, 0x30, 0x2b, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x22, 0x2d, 0x30, 0x2b, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x31, 0x30, 0x32, 0x20, 0x33, 0x34, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x33, 0x34, 0x20, 0x36, 0x38, 0x20, 0x33, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x33, 0x20, 0x33, 0x34, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x33, 0x34, 0x20, 0x30, 0x20, 0x33, 0x34, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x70, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2d, 0x30, 0x2b, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x22, 0x2b, 0x30, 0x2d, 0x30, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x30, 0x20, 0x30, 0x20, 0x35, 0x31, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x30, 0x20, 0x33, 0x34, 0x20, 0x33, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x33, 0x30, 0x20, 0x36, 0x38, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x30, 0x20, 0x31, 0x30, 0x32, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x62, 0x6f, 0x74, 0x74, 0x6f, 0x6d, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2b, 0x30, 0x2d, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x09, 0x22, 0x64, 0x65, 0x66, 0x61, 0x75, 0x6c, 0x74, 0x22, 0x20, 0x7b, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x31, 0x30, 0x32, 0x20, 0x30, 0x20, 0x35, 0x31, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x35, 0x31, 0x20, 0x30, 0x20, 0x36, 0x38, 0x20, 0x33, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x36, 0x38, 0x20, 0x33, 0x30, 0x20, 0x33, 0x34, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x6c, 0x69, 0x6e, 0x65, 0x20, 0x33, 0x34, 0x20, 0x30, 0x20, 0x30, 0x20, 0x30, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x73, 0x70, 0x6b, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x62, 0x6f, 0x74, 0x74, 0x6f, 0x6d, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x6e, 0x6f, 0x6e, 0x65, 0x0a, 0x09, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x67, 0x65, 0x6f, 0x6d, 0x65, 0x74, 0x72, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x2d, 0x30, 0x2d, 0x24, 0x6f, 0x66, 0x66, 0x73, 0x65, 0x74, 0x0a, 0x09, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x6d, 0x73, 0x67, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x2e, 0x62, 0x74, 0x6e, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x73, 0x69, 0x64, 0x65, 0x20, 0x74, 0x6f, 0x70, 0x20, 0x2d, 0x66, 0x69, 0x6c, 0x6c, 0x20, 0x62, 0x6f, 0x74, 0x68, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x20, 0x24, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x5f, 0x78, 0x62, 0x6d, 0x20, 0x7b, 0x20, 0x6e, 0x65, 0x77, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x67, 0x6c, 0x6f, 0x62, 0x61, 0x6c, 0x20, 0x78, 0x62, 0x6d, 0x69, 0x64, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x2e, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x64, 0x65, 0x6c, 0x65, 0x74, 0x65, 0x20, 0x24, 0x78, 0x62, 0x6d, 0x69, 0x64, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x78, 0x62, 0x6d, 0x69, 0x64, 0x20, 0x5b, 0x20, 0x2e, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70, 0x20, 0x31, 0x30, 0x70, 0x20, 0x31, 0x30, 0x70, 0x20, 0x2d, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70, 0x20, 0x24, 0x6e, 0x65, 0x77, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x2d, 0x61, 0x6e, 0x63, 0x68, 0x6f, 0x72, 0x20, 0x6e, 0x77, 0x20, 0x5d, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x61, 0x6e, 0x69, 0x6d, 0x61, 0x74, 0x65, 0x20, 0x61, 0x72, 0x67, 0x73, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x66, 0x6f, 0x72, 0x65, 0x61, 0x63, 0x68, 0x20, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x24, 0x61, 0x72, 0x67, 0x73, 0x20, 0x7b, 0x0a, 0x09, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x5f, 0x78, 0x62, 0x6d, 0x20, 0x24, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x0a, 0x09, 0x75, 0x70, 0x64, 0x61, 0x74, 0x65, 0x0a, 0x09, 0x61, 0x66, 0x74, 0x65, 0x72, 0x20, 0x32, 0x35, 0x30, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x70, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x23, 0x20, 0x54, 0x68, 0x65, 0x20, 0x63, 0x61, 0x6e, 0x76, 0x61, 0x73, 0x20, 0x69, 0x73, 0x20, 0x61, 0x20, 0x64, 0x75, 0x6d, 0x6d, 0x79, 0x20, 0x74, 0x6f, 0x20, 0x62, 0x6c, 0x6f, 0x63, 0x6b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x6e, 0x65, 0x73, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x63, 0x61, 0x6e, 0x76, 0x61, 0x73, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x69, 0x20, 0x5b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x61, 0x6e, 0x69, 0x6d, 0x61, 0x74, 0x65, 0x5f, 0x62, 0x67, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x65, 0x73, 0x74, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x34, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x33, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x32, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x31, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x30, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x30, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x31, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x32, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x33, 0x20, 0x76, 0x32, 0x63, 0x70, 0x30, 0x30, 0x30, 0x34, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x65, 0x73, 0x74, 0x20, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x61, 0x66, 0x74, 0x65, 0x72, 0x20, 0x5b, 0x20, 0x65, 0x78, 0x70, 0x72, 0x20, 0x32, 0x35, 0x30, 0x20, 0x2a, 0x20, 0x24, 0x69, 0x20, 0x5d, 0x20, 0x7b, 0x20, 0x64, 0x65, 0x73, 0x74, 0x72, 0x6f, 0x79, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x7d, 0x0a, 0x7d, 0x0a, 0x0a, 0x23, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x6e, 0x65, 0x73, 0x73, 0x0a, 0x23, 0x20, 0x43, 0x61, 0x6c, 0x6c, 0x65, 0x64, 0x20, 0x6f, 0x6e, 0x63, 0x65, 0x20, 0x65, 0x76, 0x65, 0x72, 0x79, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x20, 0x69, 0x6e, 0x70, 0x75, 0x74, 0x20, 0x69, 0x73, 0x20, 0x72, 0x65, 0x71, 0x75, 0x65, 0x73, 0x74, 0x65, 0x64, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x6f, 0x6e, 0x63, 0x65, 0x20, 0x65, 0x76, 0x65, 0x72, 0x79, 0x20, 0x66, 0x69, 0x76, 0x65, 0x20, 0x73, 0x65, 0x63, 0x6f, 0x6e, 0x64, 0x73, 0x2e, 0x0a, 0x23, 0x20, 0x53, 0x68, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x64, 0x6f, 0x20, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x61, 0x6e, 0x6e, 0x6f, 0x79, 0x69, 0x6e, 0x67, 0x20, 0x74, 0x68, 0x69, 0x6e, 0x67, 0x73, 0x2e, 0x0a, 0x23, 0x0a, 0x23, 0x20, 0x54, 0x61, 0x75, 0x6e, 0x74, 0x73, 0x20, 0x63, 0x61, 0x6d, 0x65, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, 0x4e, 0x6f, 0x61, 0x68, 0x20, 0x46, 0x72, 0x69, 0x65, 0x64, 0x6d, 0x61, 0x6e, 0x27, 0x73, 0x20, 0x73, 0x69, 0x6c, 0x6c, 0x79, 0x2d, 0x6d, 0x61, 0x69, 0x6c, 0x2e, 0x65, 0x6c, 0x2e, 0x0a, 0x23, 0x20, 0x54, 0x68, 0x65, 0x79, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x63, 0x6f, 0x6d, 0x65, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, 0x4e, 0x6f, 0x61, 0x68, 0x20, 0x46, 0x72, 0x69, 0x65, 0x64, 0x6d, 0x61, 0x6e, 0x2c, 0x20, 0x4a, 0x61, 0x6d, 0x69, 0x65, 0x20, 0x5a, 0x61, 0x77, 0x69, 0x6e, 0x73, 0x6b, 0x69, 0x2c, 0x20, 0x4a, 0x69, 0x6d, 0x20, 0x42, 0x6c, 0x61, 0x6e, 0x64, 0x79, 0x2c, 0x0a, 0x23, 0x20, 0x54, 0x68, 0x6f, 0x6d, 0x61, 0x73, 0x20, 0x42, 0x75, 0x73, 0x68, 0x6e, 0x65, 0x6c, 0x6c, 0x2c, 0x20, 0x52, 0x6f, 0x6c, 0x61, 0x6e, 0x64, 0x20, 0x4d, 0x63, 0x47, 0x72, 0x61, 0x74, 0x68, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x61, 0x20, 0x63, 0x61, 0x73, 0x74, 0x20, 0x6f, 0x66, 0x20, 0x64, 0x6f, 0x7a, 0x65, 0x6e, 0x73, 0x2e, 0x0a, 0x23, 0x20, 0x53, 0x6f, 0x6d, 0x65, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x65, 0x73, 0x65, 0x20, 0x77, 0x65, 0x72, 0x65, 0x20, 0x6f, 0x72, 0x69, 0x67, 0x69, 0x6e, 0x61, 0x6c, 0x6c, 0x79, 0x20, 0x74, 0x61, 0x75, 0x6e, 0x74, 0x73, 0x20, 0x61, 0x62, 0x6f, 0x75, 0x74, 0x20, 0x45, 0x6d, 0x61, 0x63, 0x73, 0x20, 0x6f, 0x72, 0x20, 0x58, 0x20, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x73, 0x2e, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x6e, 0x65, 0x73, 0x73, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x69, 0x66, 0x20, 0x7b, 0x20, 0x5b, 0x20, 0x77, 0x69, 0x6e, 0x66, 0x6f, 0x20, 0x65, 0x78, 0x69, 0x73, 0x74, 0x73, 0x20, 0x2e, 0x64, 0x6c, 0x67, 0x20, 0x5d, 0x20, 0x7d, 0x20, 0x7b, 0x0a, 0x09, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x77, 0x69, 0x74, 0x63, 0x68, 0x20, 0x2d, 0x67, 0x6c, 0x6f, 0x62, 0x20, 0x5b, 0x76, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x20, 0x34, 0x30, 0x30, 0x30, 0x5d, 0x20, 0x7b, 0x0a, 0x09, 0x30, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6e, 0x66, 0x69, 0x72, 0x6d, 0x20, 0x22, 0x41, 0x72, 0x65, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x73, 0x75, 0x72, 0x65, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x77, 0x69, 0x73, 0x68, 0x20, 0x74, 0x6f, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x61, 0x20, 0x73, 0x70, 0x6f, 0x6e, 0x74, 0x61, 0x6e, 0x69, 0x6f, 0x75, 0x73, 0x20, 0x70, 0x6f, 0x68, 0x6e, 0x20, 0x66, 0x61, 0x68, 0x72, 0x3f, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x44, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x63, 0x72, 0x79, 0x20, 0x2d, 0x2d, 0x2d, 0x20, 0x69, 0x74, 0x20, 0x77, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x68, 0x65, 0x6c, 0x70, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x32, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x44, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x74, 0x72, 0x79, 0x20, 0x74, 0x68, 0x69, 0x73, 0x20, 0x61, 0x74, 0x20, 0x68, 0x6f, 0x6d, 0x65, 0x2c, 0x20, 0x6b, 0x69, 0x64, 0x73, 0x21, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x33, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x4f, 0x72, 0x20, 0x70, 0x65, 0x72, 0x68, 0x61, 0x70, 0x73, 0x20, 0x79, 0x6f, 0x75, 0x27, 0x64, 0x20, 0x70, 0x72, 0x65, 0x66, 0x65, 0x72, 0x20, 0x52, 0x75, 0x73, 0x73, 0x69, 0x61, 0x6e, 0x20, 0x52, 0x6f, 0x75, 0x74, 0x6c, 0x65, 0x74, 0x74, 0x65, 0x2c, 0x20, 0x61, 0x66, 0x74, 0x65, 0x72, 0x20, 0x61, 0x6c, 0x6c, 0x3f, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x34, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x59, 0x6f, 0x75, 0x27, 0x6c, 0x6c, 0x20, 0x75, 0x6e, 0x64, 0x65, 0x72, 0x73, 0x74, 0x61, 0x6e, 0x64, 0x20, 0x77, 0x68, 0x65, 0x6e, 0x20, 0x79, 0x6f, 0x75, 0x27, 0x72, 0x65, 0x20, 0x6f, 0x6c, 0x64, 0x65, 0x72, 0x2c, 0x20, 0x64, 0x65, 0x61, 0x72, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x35, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x57, 0x61, 0x6e, 0x74, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x20, 0x72, 0x79, 0x65, 0x3f, 0x20, 0x20, 0x27, 0x43, 0x6f, 0x75, 0x72, 0x73, 0x65, 0x20, 0x79, 0x61, 0x20, 0x64, 0x6f, 0x21, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x36, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x59, 0x6f, 0x75, 0x72, 0x20, 0x62, 0x6c, 0x6f, 0x6f, 0x64, 0x20, 0x70, 0x72, 0x65, 0x73, 0x73, 0x75, 0x72, 0x65, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x77, 0x65, 0x6e, 0x74, 0x20, 0x75, 0x70, 0x20, 0x61, 0x20, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x37, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x59, 0x6f, 0x75, 0x72, 0x20, 0x62, 0x6c, 0x6f, 0x6f, 0x64, 0x20, 0x70, 0x72, 0x65, 0x73, 0x73, 0x75, 0x72, 0x65, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x77, 0x65, 0x6e, 0x74, 0x20, 0x75, 0x70, 0x20, 0x61, 0x20, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x38, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x59, 0x6f, 0x75, 0x72, 0x20, 0x62, 0x6c, 0x6f, 0x6f, 0x64, 0x20, 0x70, 0x72, 0x65, 0x73, 0x73, 0x75, 0x72, 0x65, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x77, 0x65, 0x6e, 0x74, 0x20, 0x75, 0x70, 0x20, 0x61, 0x20, 0x70, 0x6f, 0x69, 0x6e, 0x74, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x30, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x41, 0x20, 0x63, 0x6f, 0x6d, 0x70, 0x65, 0x6c, 0x6c, 0x69, 0x6e, 0x67, 0x20, 0x61, 0x72, 0x67, 0x75, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x70, 0x65, 0x6e, 0x63, 0x69, 0x6c, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x70, 0x61, 0x70, 0x65, 0x72, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x31, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x41, 0x6e, 0x20, 0x69, 0x6e, 0x73, 0x70, 0x69, 0x72, 0x69, 0x6e, 0x67, 0x20, 0x65, 0x78, 0x61, 0x6d, 0x70, 0x6c, 0x65, 0x20, 0x6f, 0x66, 0x20, 0x66, 0x6f, 0x72, 0x6d, 0x20, 0x66, 0x6f, 0x6c, 0x6c, 0x6f, 0x77, 0x69, 0x6e, 0x67, 0x20, 0x66, 0x75, 0x6e, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2e, 0x2e, 0x2e, 0x20, 0x74, 0x6f, 0x20, 0x48, 0x65, 0x6c, 0x6c, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x32, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x42, 0x65, 0x63, 0x61, 0x75, 0x73, 0x65, 0x20, 0x48, 0x65, 0x6c, 0x6c, 0x20, 0x77, 0x61, 0x73, 0x20, 0x66, 0x75, 0x6c, 0x6c, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x33, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x69, 0x73, 0x20, 0x66, 0x72, 0x65, 0x65, 0x6c, 0x79, 0x20, 0x72, 0x65, 0x64, 0x69, 0x73, 0x74, 0x72, 0x69, 0x62, 0x75, 0x74, 0x61, 0x62, 0x6c, 0x65, 0x3b, 0x20, 0x76, 0x6f, 0x69, 0x64, 0x20, 0x77, 0x68, 0x65, 0x72, 0x65, 0x20, 0x70, 0x72, 0x6f, 0x68, 0x69, 0x62, 0x69, 0x74, 0x65, 0x64, 0x20, 0x62, 0x79, 0x20, 0x6c, 0x61, 0x77, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x34, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x49, 0x66, 0x20, 0x53, 0x49, 0x47, 0x49, 0x4e, 0x54, 0x20, 0x64, 0x6f, 0x65, 0x73, 0x6e, 0x27, 0x74, 0x20, 0x77, 0x6f, 0x72, 0x6b, 0x2c, 0x20, 0x74, 0x72, 0x79, 0x20, 0x61, 0x20, 0x74, 0x72, 0x61, 0x6e, 0x71, 0x75, 0x69, 0x6c, 0x69, 0x7a, 0x65, 0x72, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x35, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x49, 0x74, 0x27, 0x73, 0x20, 0x61, 0x6c, 0x6c, 0x20, 0x66, 0x75, 0x6e, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x67, 0x61, 0x6d, 0x65, 0x73, 0x2c, 0x20, 0x75, 0x6e, 0x74, 0x69, 0x6c, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x62, 0x6f, 0x64, 0x79, 0x20, 0x74, 0x72, 0x69, 0x65, 0x73, 0x20, 0x74, 0x6f, 0x20, 0x65, 0x64, 0x69, 0x74, 0x20, 0x61, 0x20, 0x66, 0x69, 0x6c, 0x65, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x36, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x4c, 0x6f, 0x76, 0x65, 0x63, 0x72, 0x61, 0x66, 0x74, 0x20, 0x77, 0x61, 0x73, 0x20, 0x61, 0x6e, 0x20, 0x6f, 0x70, 0x74, 0x69, 0x6d, 0x69, 0x73, 0x74, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x37, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x4d, 0x6f, 0x72, 0x65, 0x20, 0x74, 0x68, 0x61, 0x6e, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x61, 0x20, 0x70, 0x72, 0x65, 0x74, 0x74, 0x79, 0x20, 0x66, 0x61, 0x63, 0x65, 0x21, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x38, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x54, 0x68, 0x65, 0x20, 0x6f, 0x6e, 0x6c, 0x79, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x65, 0x64, 0x69, 0x74, 0x6f, 0x72, 0x20, 0x6b, 0x6e, 0x6f, 0x77, 0x6e, 0x20, 0x74, 0x6f, 0x20, 0x67, 0x65, 0x74, 0x20, 0x69, 0x6e, 0x64, 0x69, 0x67, 0x65, 0x73, 0x74, 0x69, 0x6f, 0x6e, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x30, 0x39, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x57, 0x68, 0x65, 0x72, 0x65, 0x20, 0x65, 0x64, 0x69, 0x74, 0x69, 0x6e, 0x67, 0x20, 0x74, 0x65, 0x78, 0x74, 0x20, 0x69, 0x73, 0x20, 0x6c, 0x69, 0x6b, 0x65, 0x20, 0x70, 0x6c, 0x61, 0x79, 0x69, 0x6e, 0x67, 0x20, 0x50, 0x61, 0x67, 0x61, 0x6e, 0x69, 0x6e, 0x69, 0x20, 0x6f, 0x6e, 0x20, 0x61, 0x20, 0x67, 0x6c, 0x61, 0x73, 0x73, 0x20, 0x68, 0x61, 0x72, 0x6d, 0x6f, 0x6e, 0x69, 0x63, 0x61, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x30, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x41, 0x6c, 0x6c, 0x20, 0x74, 0x68, 0x65, 0x20, 0x70, 0x72, 0x6f, 0x62, 0x6c, 0x65, 0x6d, 0x73, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x74, 0x77, 0x69, 0x63, 0x65, 0x20, 0x74, 0x68, 0x65, 0x20, 0x62, 0x75, 0x67, 0x73, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x31, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x44, 0x69, 0x73, 0x73, 0x61, 0x74, 0x69, 0x73, 0x66, 0x61, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x20, 0x67, 0x75, 0x61, 0x72, 0x61, 0x6e, 0x74, 0x65, 0x65, 0x64, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x32, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x44, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x67, 0x65, 0x74, 0x20, 0x66, 0x72, 0x75, 0x73, 0x74, 0x72, 0x61, 0x74, 0x65, 0x64, 0x20, 0x77, 0x69, 0x74, 0x68, 0x6f, 0x75, 0x74, 0x20, 0x69, 0x74, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x33, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x45, 0x76, 0x65, 0x6e, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x64, 0x6f, 0x69, 0x6e, 0x67, 0x20, 0x61, 0x6e, 0x79, 0x74, 0x68, 0x69, 0x6e, 0x67, 0x20, 0x77, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x62, 0x65, 0x65, 0x6e, 0x20, 0x62, 0x65, 0x74, 0x74, 0x65, 0x72, 0x20, 0x74, 0x68, 0x61, 0x6e, 0x20, 0x6e, 0x6f, 0x74, 0x68, 0x69, 0x6e, 0x67, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x34, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x45, 0x76, 0x65, 0x6e, 0x20, 0x79, 0x6f, 0x75, 0x72, 0x20, 0x64, 0x6f, 0x67, 0x20, 0x77, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x6c, 0x69, 0x6b, 0x65, 0x20, 0x69, 0x74, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x35, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x46, 0x6f, 0x72, 0x6d, 0x20, 0x66, 0x6f, 0x6c, 0x6c, 0x6f, 0x77, 0x73, 0x20, 0x6d, 0x61, 0x6c, 0x66, 0x75, 0x6e, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x36, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x49, 0x74, 0x20, 0x63, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x77, 0x6f, 0x72, 0x73, 0x65, 0x2c, 0x20, 0x62, 0x75, 0x74, 0x20, 0x69, 0x74, 0x27, 0x6c, 0x6c, 0x20, 0x74, 0x61, 0x6b, 0x65, 0x20, 0x74, 0x69, 0x6d, 0x65, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x37, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x49, 0x74, 0x20, 0x63, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x68, 0x61, 0x70, 0x70, 0x65, 0x6e, 0x20, 0x74, 0x6f, 0x20, 0x79, 0x6f, 0x75, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x38, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x4c, 0x65, 0x74, 0x20, 0x69, 0x74, 0x20, 0x67, 0x65, 0x74, 0x20, 0x69, 0x6e, 0x20, 0x2a, 0x79, 0x6f, 0x75, 0x72, 0x2a, 0x20, 0x77, 0x61, 0x79, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x31, 0x39, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x4c, 0x69, 0x76, 0x65, 0x20, 0x74, 0x68, 0x65, 0x20, 0x6e, 0x69, 0x67, 0x68, 0x74, 0x6d, 0x61, 0x72, 0x65, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x32, 0x30, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x50, 0x75, 0x74, 0x74, 0x69, 0x6e, 0x67, 0x20, 0x6e, 0x65, 0x77, 0x20, 0x6c, 0x69, 0x6d, 0x69, 0x74, 0x73, 0x20, 0x6f, 0x6e, 0x20, 0x70, 0x72, 0x6f, 0x64, 0x75, 0x63, 0x74, 0x69, 0x76, 0x69, 0x74, 0x79, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x32, 0x31, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x53, 0x6f, 0x6d, 0x65, 0x20, 0x76, 0x6f, 0x69, 0x64, 0x73, 0x20, 0x61, 0x72, 0x65, 0x20, 0x62, 0x65, 0x74, 0x74, 0x65, 0x72, 0x20, 0x6c, 0x65, 0x66, 0x74, 0x20, 0x75, 0x6e, 0x66, 0x69, 0x6c, 0x6c, 0x65, 0x64, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x32, 0x32, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x54, 0x68, 0x65, 0x20, 0x70, 0x72, 0x6f, 0x62, 0x6c, 0x65, 0x6d, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x79, 0x6f, 0x75, 0x72, 0x20, 0x70, 0x72, 0x6f, 0x62, 0x6c, 0x65, 0x6d, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x35, 0x30, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x3a, 0x20, 0x49, 0x74, 0x20, 0x77, 0x61, 0x73, 0x20, 0x68, 0x61, 0x72, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x77, 0x72, 0x69, 0x74, 0x65, 0x3b, 0x20, 0x69, 0x74, 0x20, 0x73, 0x68, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x68, 0x61, 0x72, 0x64, 0x20, 0x74, 0x6f, 0x20, 0x75, 0x73, 0x65, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x35, 0x31, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x49, 0x20, 0x56, 0x49, 0x20, 0x56, 0x49, 0x3a, 0x20, 0x54, 0x68, 0x65, 0x20, 0x65, 0x64, 0x69, 0x74, 0x6f, 0x72, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x65, 0x20, 0x62, 0x65, 0x61, 0x73, 0x74, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x31, 0x35, 0x32, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x3a, 0x20, 0x50, 0x75, 0x74, 0x74, 0x69, 0x6e, 0x67, 0x20, 0x74, 0x68, 0x65, 0x20, 0x61, 0x73, 0x73, 0x20, 0x69, 0x6e, 0x20, 0x61, 0x73, 0x73, 0x69, 0x73, 0x74, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x32, 0x30, 0x30, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x58, 0x20, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x73, 0x3a, 0x20, 0x41, 0x20, 0x6d, 0x69, 0x73, 0x74, 0x61, 0x6b, 0x65, 0x20, 0x63, 0x61, 0x72, 0x72, 0x69, 0x65, 0x64, 0x20, 0x6f, 0x75, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x70, 0x65, 0x72, 0x66, 0x65, 0x63, 0x74, 0x69, 0x6f, 0x6e, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x32, 0x30, 0x31, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x58, 0x20, 0x57, 0x69, 0x6e, 0x64, 0x6f, 0x77, 0x73, 0x3a, 0x20, 0x41, 0x20, 0x74, 0x65, 0x72, 0x6d, 0x69, 0x6e, 0x61, 0x6c, 0x20, 0x64, 0x69, 0x73, 0x65, 0x61, 0x73, 0x65, 0x2e, 0x22, 0x20, 0x7d, 0x0a, 0x09, 0x22, 0x35, 0x30, 0x3f, 0x22, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x70, 0x20, 0x7d, 0x0a, 0x09, 0x22, 0x35, 0x31, 0x3f, 0x22, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x70, 0x20, 0x7d, 0x0a, 0x09, 0x22, 0x35, 0x32, 0x3f, 0x22, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x70, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x7d, 0x0a, 0x0a, 0x23, 0x20, 0x54, 0x68, 0x69, 0x73, 0x20, 0x73, 0x68, 0x6f, 0x75, 0x6c, 0x64, 0x20, 0x62, 0x65, 0x20, 0x69, 0x6e, 0x76, 0x6f, 0x6b, 0x65, 0x64, 0x20, 0x6f, 0x6e, 0x63, 0x65, 0x2e, 0x20, 0x20, 0x49, 0x74, 0x20, 0x63, 0x61, 0x75, 0x73, 0x65, 0x73, 0x20, 0x69, 0x74, 0x73, 0x65, 0x6c, 0x66, 0x20, 0x74, 0x6f, 0x20, 0x62, 0x65, 0x20, 0x69, 0x6e, 0x76, 0x6f, 0x6b, 0x65, 0x64, 0x20, 0x65, 0x76, 0x65, 0x72, 0x79, 0x20, 0x35, 0x30, 0x30, 0x30, 0x20, 0x6d, 0x73, 0x2e, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x6e, 0x65, 0x73, 0x73, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x6e, 0x65, 0x73, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x61, 0x66, 0x74, 0x65, 0x72, 0x20, 0x35, 0x30, 0x30, 0x30, 0x20, 0x7b, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x6e, 0x65, 0x73, 0x73, 0x20, 0x7d, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x61, 0x6e, 0x69, 0x6d, 0x61, 0x74, 0x65, 0x5f, 0x62, 0x67, 0x20, 0x61, 0x72, 0x67, 0x73, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x69, 0x20, 0x30, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x66, 0x6f, 0x72, 0x65, 0x61, 0x63, 0x68, 0x20, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x24, 0x61, 0x72, 0x67, 0x73, 0x20, 0x7b, 0x0a, 0x09, 0x61, 0x66, 0x74, 0x65, 0x72, 0x20, 0x5b, 0x20, 0x65, 0x78, 0x70, 0x72, 0x20, 0x32, 0x35, 0x30, 0x20, 0x2a, 0x20, 0x24, 0x69, 0x20, 0x5d, 0x20, 0x5b, 0x20, 0x6c, 0x69, 0x73, 0x74, 0x20, 0x63, 0x68, 0x61, 0x6e, 0x67, 0x65, 0x5f, 0x78, 0x62, 0x6d, 0x20, 0x24, 0x66, 0x72, 0x61, 0x6d, 0x65, 0x20, 0x5d, 0x0a, 0x09, 0x73, 0x65, 0x74, 0x20, 0x69, 0x20, 0x5b, 0x20, 0x65, 0x78, 0x70, 0x72, 0x20, 0x24, 0x69, 0x20, 0x2b, 0x20, 0x31, 0x20, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x72, 0x65, 0x74, 0x75, 0x72, 0x6e, 0x20, 0x24, 0x69, 0x0a, 0x7d, 0x0a, 0x0a, 0x70, 0x72, 0x6f, 0x63, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x69, 0x6e, 0x69, 0x74, 0x20, 0x7b, 0x7d, 0x20, 0x7b, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x67, 0x6c, 0x6f, 0x62, 0x61, 0x6c, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x78, 0x62, 0x6d, 0x69, 0x64, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x6f, 0x6c, 0x64, 0x69, 0x74, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x74, 0x69, 0x74, 0x6c, 0x65, 0x20, 0x2e, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x69, 0x63, 0x6f, 0x6e, 0x6e, 0x61, 0x6d, 0x65, 0x20, 0x2e, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x63, 0x61, 0x6e, 0x76, 0x61, 0x73, 0x20, 0x2e, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x2d, 0x77, 0x69, 0x64, 0x74, 0x68, 0x20, 0x31, 0x32, 0x38, 0x70, 0x20, 0x2d, 0x68, 0x65, 0x69, 0x67, 0x68, 0x74, 0x20, 0x31, 0x32, 0x38, 0x70, 0x20, 0x2d, 0x62, 0x61, 0x63, 0x6b, 0x67, 0x72, 0x6f, 0x75, 0x6e, 0x64, 0x20, 0x77, 0x68, 0x69, 0x74, 0x65, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x78, 0x62, 0x6d, 0x69, 0x64, 0x20, 0x5b, 0x20, 0x2e, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x63, 0x72, 0x65, 0x61, 0x74, 0x65, 0x20, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70, 0x20, 0x31, 0x30, 0x70, 0x20, 0x31, 0x30, 0x70, 0x20, 0x2d, 0x62, 0x69, 0x74, 0x6d, 0x61, 0x70, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x6d, 0x70, 0x74, 0x79, 0x20, 0x2d, 0x61, 0x6e, 0x63, 0x68, 0x6f, 0x72, 0x20, 0x6e, 0x77, 0x20, 0x5d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x70, 0x61, 0x63, 0x6b, 0x20, 0x2e, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x62, 0x69, 0x6e, 0x64, 0x20, 0x2e, 0x20, 0x3c, 0x45, 0x6e, 0x74, 0x65, 0x72, 0x3e, 0x20, 0x7b, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x77, 0x6d, 0x20, 0x70, 0x72, 0x6f, 0x74, 0x6f, 0x63, 0x6f, 0x6c, 0x20, 0x2e, 0x20, 0x57, 0x4d, 0x5f, 0x44, 0x45, 0x4c, 0x45, 0x54, 0x45, 0x5f, 0x57, 0x49, 0x4e, 0x44, 0x4f, 0x57, 0x20, 0x7b, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6e, 0x66, 0x69, 0x72, 0x6d, 0x20, 0x22, 0x41, 0x72, 0x65, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x73, 0x75, 0x72, 0x65, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x64, 0x6f, 0x6e, 0x27, 0x74, 0x20, 0x77, 0x61, 0x6e, 0x74, 0x20, 0x74, 0x6f, 0x20, 0x63, 0x6c, 0x6f, 0x73, 0x65, 0x20, 0x74, 0x68, 0x65, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x61, 0x73, 0x73, 0x69, 0x73, 0x74, 0x61, 0x6e, 0x74, 0x3f, 0x22, 0x0a, 0x09, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x41, 0x73, 0x73, 0x69, 0x73, 0x74, 0x61, 0x6e, 0x74, 0x20, 0x6e, 0x6f, 0x74, 0x20, 0x63, 0x6c, 0x6f, 0x73, 0x65, 0x64, 0x2e, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x7d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x20, 0x2d, 0x30, 0x2b, 0x30, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x73, 0x65, 0x74, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x6f, 0x6c, 0x64, 0x69, 0x74, 0x20, 0x30, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x72, 0x6f, 0x74, 0x61, 0x74, 0x65, 0x5f, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x70, 0x6f, 0x73, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x61, 0x6e, 0x69, 0x6d, 0x61, 0x74, 0x65, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x6d, 0x70, 0x74, 0x79, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x6e, 0x74, 0x5f, 0x30, 0x30, 0x30, 0x31, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x6e, 0x74, 0x5f, 0x30, 0x30, 0x30, 0x32, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x6e, 0x74, 0x5f, 0x30, 0x30, 0x30, 0x33, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x6e, 0x74, 0x5f, 0x30, 0x30, 0x30, 0x34, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x72, 0x65, 0x73, 0x74, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x65, 0x75, 0x6c, 0x61, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x48, 0x69, 0x20, 0x74, 0x68, 0x65, 0x72, 0x65, 0x21, 0x20, 0x20, 0x49, 0x27, 0x6d, 0x20, 0x74, 0x68, 0x65, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x41, 0x73, 0x73, 0x69, 0x73, 0x74, 0x61, 0x6e, 0x74, 0x21, 0x20, 0x20, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x68, 0x61, 0x76, 0x65, 0x20, 0x61, 0x6e, 0x79, 0x20, 0x71, 0x75, 0x65, 0x73, 0x74, 0x69, 0x6f, 0x6e, 0x73, 0x20, 0x61, 0x62, 0x6f, 0x75, 0x74, 0x20, 0x56, 0x49, 0x2c, 0x20, 0x6a, 0x75, 0x73, 0x74, 0x20, 0x61, 0x73, 0x6b, 0x20, 0x6d, 0x65, 0x21, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x63, 0x6f, 0x6d, 0x6d, 0x65, 0x6e, 0x74, 0x20, 0x22, 0x49, 0x66, 0x20, 0x79, 0x6f, 0x75, 0x20, 0x68, 0x61, 0x76, 0x65, 0x6e, 0x27, 0x74, 0x20, 0x75, 0x73, 0x65, 0x64, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x62, 0x65, 0x66, 0x6f, 0x72, 0x65, 0x2c, 0x20, 0x62, 0x65, 0x20, 0x73, 0x75, 0x72, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x72, 0x65, 0x6d, 0x65, 0x6d, 0x62, 0x65, 0x72, 0x20, 0x74, 0x68, 0x61, 0x74, 0x20, 0x74, 0x68, 0x65, 0x20, 0x56, 0x69, 0x67, 0x6f, 0x72, 0x20, 0x41, 0x73, 0x73, 0x69, 0x73, 0x74, 0x61, 0x6e, 0x74, 0x20, 0x69, 0x73, 0x20, 0x68, 0x65, 0x72, 0x65, 0x20, 0x74, 0x6f, 0x20, 0x68, 0x65, 0x6c, 0x70, 0x20, 0x79, 0x6f, 0x75, 0x21, 0x22, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x76, 0x69, 0x67, 0x6f, 0x72, 0x5f, 0x68, 0x61, 0x6e, 0x64, 0x6c, 0x65, 0x5f, 0x72, 0x61, 0x6e, 0x64, 0x6f, 0x6d, 0x6e, 0x65, 0x73, 0x73, 0x0a, 0x7d, 0x0a, 0x00 }; vigor-0.016.orig/build/Makefile.in0100644000076400007640000005311507103707262015443 0ustar cjw44cjw44# @(#)Makefile.in 8.75 (Berkeley) 10/23/96 srcdir= @srcdir@/.. CC= @CC@ OPTFLAG=@OPTFLAG@ CFLAGS= -c $(OPTFLAG) -I. -I$(srcdir)/include @CPPFLAGS@ @CFLAGS@ LDFLAGS=@LDFLAGS@ PERL= @vi_cv_path_perl@ PERLLIB=@vi_cv_perllib@ SHRPENV=@shrpenv@ # Objects COBJS= addbytes.o addch.o box.o clear.o clrtobot.o clrtoeol.o \ cr_put.o ctrace.o cur_hash.o curses.o delch.o deleteln.o delwin.o \ erase.o fullname.o getch.o getstr.o id_subwins.o idlok.o initscr.o \ insch.o insertln.o longname.o move.o mvwin.o newwin.o overlay.o \ overwrite.o putchar.o refresh.o scroll.o setterm.o standout.o \ toucholap.o touchwin.o tscroll.o tstp.o tty.o unctrl.o waddnstr.o CLOBJS= cl_bsd.o cl_funcs.o cl_main.o cl_read.o cl_screen.o cl_term.o DBOBJS= db.o mpool.o \ bt_close.o bt_conv.o bt_debug.o bt_delete.o bt_get.o bt_open.o \ bt_overflow.o bt_page.o bt_put.o bt_search.o bt_seq.o \ bt_split.o bt_utils.o \ rec_close.o rec_delete.o rec_get.o rec_open.o rec_put.o \ rec_search.o rec_seq.o rec_utils.o REOBJS= regcomp.o regerror.o regexec.o regfree.o VIOBJS= cut.o delete.o ex.o ex_abbrev.o ex_append.o ex_args.o ex_argv.o \ ex_at.o ex_bang.o ex_cd.o ex_cmd.o ex_cscope.o ex_delete.o \ ex_display.o ex_edit.o ex_equal.o ex_file.o ex_filter.o \ ex_global.o ex_init.o ex_join.o ex_map.o ex_mark.o ex_mkexrc.o \ ex_move.o ex_open.o ex_perl.o ex_preserve.o ex_print.o ex_put.o \ ex_quit.o ex_read.o ex_screen.o ex_script.o ex_set.o ex_shell.o \ ex_shift.o ex_source.o ex_stop.o ex_subst.o ex_tag.o ex_tcl.o \ ex_txt.o ex_undo.o ex_usage.o ex_util.o ex_version.o ex_visual.o \ ex_write.o ex_yank.o ex_z.o exf.o getc.o key.o line.o log.o main.o \ mark.o msg.o options.o options_f.o put.o recover.o screen.o \ search.o seq.o util.o v_at.o v_ch.o v_cmd.o v_delete.o v_ex.o \ v_increment.o v_init.o v_itxt.o v_left.o v_mark.o v_match.o \ v_paragraph.o v_put.o v_redraw.o v_replace.o v_right.o v_screen.o \ v_scroll.o v_search.o v_section.o v_sentence.o v_status.o v_txt.o \ v_ulcase.o v_undo.o v_util.o v_word.o v_xchar.o v_yank.o v_z.o \ v_zexit.o vi.o vigor.o vs_line.o vs_msg.o vs_refresh.o \ vs_relative.o vs_smap.o vs_split.o all: vigor NVIALL= $(CLOBJS) $(VIOBJS) @cobjs@ @LIBOBJS@ vigor: $(NVIALL) $(SHRPENV) $(CC) $(LDFLAGS) -o $@ $(NVIALL) @LIBS@ chmod= @vi_cv_path_chmod@ cp= @vi_cv_path_cp@ ln= @vi_cv_path_ln@ mkdir= @vi_cv_path_mkdir@ rm= @vi_cv_path_rm@ strip= @vi_cv_path_strip@ prefix= @prefix@ bindir= @bindir@ datadir=@datadir@ # mandir= @mandir@ exec_prefix=@exec_prefix@ dmode= 755 emode= 555 fmode= 444 transform=@program_transform_name@ install: all install_common @echo "Installing vigor: $(bindir) ..." [ -d $(bindir) ] || \ ($(mkdir) $(bindir) && $(chmod) $(dmode) $(bindir)) cd $(bindir) && $(rm) -f `echo vigor | sed '$(transform)'` $(cp) vigor $(bindir)/`echo vigor | sed '$(transform)'` cd $(bindir) && [ -f $(strip) ] && \ $(strip) `echo vigor | sed '$(transform)'` cd $(bindir) && $(chmod) $(emode) `echo vigor | sed '$(transform)'` # Never used; I'm just saving it for if I want it later. install_man: [ -d $(mandir) ] || \ ($(mkdir) $(mandir) && $(chmod) $(dmode) $(mandir)) [ -d $(mandir)/cat1 ] || \ ($(mkdir) $(mandir)/cat1 && $(chmod) $(dmode) $(mandir)/cat1) @echo "Installing man pages: $(mandir) ..." cd $(mandir)/cat1 && $(rm) -f `echo vi.0 | sed '$(transform)'` $(cp) $(srcdir)/docs/USD.doc/vi.man/vi.0 \ $(mandir)/cat1/`echo vi.0 | sed '$(transform)'` cd $(mandir)/cat1 && $(chmod) $(fmode) `echo vi.0 | sed '$(transform)'` cd $(mandir)/cat1 && $(rm) -f `echo ex.0 | sed '$(transform)'` cd $(mandir)/cat1 && $(rm) -f `echo view.0 | sed '$(transform)'` cd $(mandir)/cat1 && $(ln) \ `echo vi.0 | sed '$(transform)'` `echo ex.0 | sed '$(transform)'` cd $(mandir)/cat1 && $(ln) \ `echo vi.0 | sed '$(transform)'` `echo view.0 | sed '$(transform)'` [ -d $(mandir)/man1 ] || \ ($(mkdir) $(mandir)/man1 && $(chmod) $(dmode) $(mandir)/man1) cd $(mandir)/man1 && $(rm) -f `echo vi.1 | sed '$(transform)'` $(cp) $(srcdir)/docs/USD.doc/vi.man/vi.1 \ $(mandir)/man1/`echo vi.1 | sed '$(transform)'` cd $(mandir)/man1 && $(chmod) $(fmode) `echo vi.1 | sed '$(transform)'` cd $(mandir)/man1 && $(rm) -f `echo ex.1 | sed '$(transform)'` cd $(mandir)/man1 && $(rm) -f `echo view.1 | sed '$(transform)'` cd $(mandir)/man1 && $(ln) \ `echo vi.1 | sed '$(transform)'` `echo ex.1 | sed '$(transform)'` cd $(mandir)/man1 && $(ln) \ `echo vi.1 | sed '$(transform)'` `echo view.1 | sed '$(transform)'` cat= dutch english french german ru_SU.KOI8-R spanish swedish install_common: [ -f $(chmod) ] [ -f $(cp) ] [ -f $(ln) ] [ -f $(mkdir) ] [ -f $(rm) ] [ -d $(prefix) ] || \ ($(mkdir) $(prefix) && $(chmod) $(dmode) $(prefix)) [ -d $(exec_prefix) ] || \ ($(mkdir) $(exec_prefix) && $(chmod) $(dmode) $(exec_prefix)) [ -d $(datadir) ] || \ ($(mkdir) $(datadir) && $(chmod) $(dmode) $(datadir)) $(rm) -rf $(datadir)/vigor $(mkdir) $(datadir)/vigor && $(chmod) $(dmode) $(datadir)/vigor @echo "Installing message catalogs: $(datadir)/vigor/catalog ..." $(mkdir) $(datadir)/vigor/catalog && \ $(chmod) $(dmode) $(datadir)/vigor/catalog (cd $(srcdir)/catalog && $(cp) $(cat) $(datadir)/vigor/catalog && \ cd $(datadir)/vigor/catalog && $(chmod) $(fmode) *) @echo "Installing Perl scripts: $(datadir)/vigor/perl ..." $(mkdir) $(datadir)/vigor/perl && $(chmod) $(dmode) $(datadir)/vigor/perl ([ -f VI.pm ] && $(cp) VI.pm $(datadir)/vigor/perl && \ cd $(datadir)/vigor/perl && $(chmod) $(fmode) VI.pm) (cd $(srcdir)/perl_scripts && $(cp) *.pl $(datadir)/vigor/perl && \ cd $(datadir)/vigor/perl && $(chmod) $(fmode) *.pl) @echo "Installing Tcl scripts: $(datadir)/vigor/tcl ..." $(mkdir) $(datadir)/vigor/tcl && $(chmod) $(dmode) $(datadir)/vigor/tcl (cd $(srcdir)/tcl_scripts && $(cp) *.tcl $(datadir)/vigor/tcl && \ cd $(datadir)/vigor/tcl && $(chmod) $(fmode) *.tcl) @echo "Installing recover script: $(datadir)/vigor/recover ..." ($(cp) recover $(datadir)/vigor/recover && \ $(chmod) $(emode) $(datadir)/vigor/recover) uninstall: $(rm) -rf $(datadir)/vigor cd $(bindir) && $(rm) -f `echo vigor | sed '$(transform)'` uninstall-man: cd $(mandir)/cat1 && $(rm) -f `echo ex.0 | sed '$(transform)'` cd $(mandir)/cat1 && $(rm) -f `echo vi.0 | sed '$(transform)'` cd $(mandir)/cat1 && $(rm) -f `echo view.0 | sed '$(transform)'` cd $(mandir)/man1 && $(rm) -f `echo ex.1 | sed '$(transform)'` cd $(mandir)/man1 && $(rm) -f `echo vi.1 | sed '$(transform)'` cd $(mandir)/man1 && $(rm) -f `echo view.1 | sed '$(transform)'` docs: cd $(srcdir)/docs/USD.doc/vi.ref && $(MAKE) cd $(srcdir)/docs/USD.doc/vi.man && $(MAKE) cd $(srcdir)/docs/USD.doc/edit && $(MAKE) cd $(srcdir)/docs/USD.doc/exref && $(MAKE) cd $(srcdir)/docs/USD.doc/vitut && $(MAKE) clean: -rm -f *.core *.o memcpy.c perl.c -rm -f a2c vigor core -rm -f $(COBJS) $(CLOBJS) $(DBOBJS) $(REOBJS) -rm -f $(VIOBJS) cleandocs: cd $(srcdir)/docs/USD.doc/vi.ref && $(MAKE) clean cd $(srcdir)/docs/USD.doc/vi.man && $(MAKE) clean cd $(srcdir)/docs/USD.doc/edit && $(MAKE) clean cd $(srcdir)/docs/USD.doc/exref && $(MAKE) clean cd $(srcdir)/docs/USD.doc/vitut && $(MAKE) clean distclean: clean cleandocs -rm -f Makefile config.cache config.h config.log config.status -rm -f pathnames.h port.h recover stamp-h maintainer-clean realclean: distclean -rm -f vigor.tcl.h # For some reason, the automatic update stuff isn't working right on # my box. ${srcdir}/configure: configure.in aclocal.m4 cd ${srcdir} && autoconf # autoheader might not change config.h.in, so touch a stamp file. ${srcdir}/config.h.in: stamp-h.in ${srcdir}/stamp-h.in: configure.in aclocal.m4 acconfig.h config.h.top config.h.bot cd ${srcdir} && autoheader echo timestamp > ${srcdir}/stamp-h.in config.h: stamp-h stamp-h: config.h.in config.status ./config.status Makefile: Makefile.in config.status ./config.status config.status: configure ./config.status --recheck # Vi curses sources. cl_bsd.o: $(srcdir)/cl/cl_bsd.c $(CC) $(CFLAGS) $? cl_funcs.o: $(srcdir)/cl/cl_funcs.c $(CC) $(CFLAGS) $? cl_main.o: $(srcdir)/cl/cl_main.c $(CC) $(CFLAGS) $? cl_read.o: $(srcdir)/cl/cl_read.c $(CC) $(CFLAGS) $? cl_screen.o: $(srcdir)/cl/cl_screen.c $(CC) $(CFLAGS) $? cl_term.o: $(srcdir)/cl/cl_term.c $(CC) $(CFLAGS) $? # Vi Tcl/Perl interpreter sources. api.o: $(srcdir)/common/api.c $(CC) $(CFLAGS) $? perl.c: $(srcdir)/perl_api/perl.xs $(srcdir)/perl_api/typemap echo "#define _PATH_PERLSCRIPTS \"$(datadir)/vigor/perl\"" > $@ $(PERL) $(PERLLIB)/ExtUtils/xsubpp -typemap \ $(PERLLIB)/ExtUtils/typemap $(srcdir)/perl_api/perl.xs >> $@ ($(PERL) -ne 'print "sub $$1 {\$$curscr->$$1(\@_)}\n" \ if /newXS\("VI::([^":]*)"/;' $@ ; echo "1;") > VI.pm perl.o: perl.c $(CC) $(CFLAGS) $? perlsfio.o: $(srcdir)/perl_api/perlsfio.c $(CC) $(CFLAGS) $? tcl.o: $(srcdir)/tcl_api/tcl.c $(CC) $(CFLAGS) $? # Vigor sources. vigor.o: $(srcdir)/vigor/vigor.c vigor.tcl.h $(CC) $(CFLAGS) @XINCS@ $(srcdir)/vigor/vigor.c vigor.tcl.h: $(srcdir)/vigor/vigor.tcl a2c ./a2c vigor_tcl < $(srcdir)/vigor/vigor.tcl > vigor.tcl.h a2c.o: $(srcdir)/vigor/a2c.c $(CC) $(CFLAGS) $? a2c: a2c.o $(SHRPENV) $(CC) $(LDFLAGS) -o $@ a2c.o # Vi sources. cut.o: $(srcdir)/common/cut.c $(CC) $(CFLAGS) $? delete.o: $(srcdir)/common/delete.c $(CC) $(CFLAGS) $? exf.o: $(srcdir)/common/exf.c $(CC) $(CFLAGS) $? key.o: $(srcdir)/common/key.c $(CC) $(CFLAGS) $? line.o: $(srcdir)/common/line.c $(CC) $(CFLAGS) $? log.o: $(srcdir)/common/log.c $(CC) $(CFLAGS) $? main.o: $(srcdir)/common/main.c $(CC) $(CFLAGS) $? mark.o: $(srcdir)/common/mark.c $(CC) $(CFLAGS) $? msg.o: $(srcdir)/common/msg.c $(CC) $(CFLAGS) $? options.o: $(srcdir)/common/options.c $(CC) $(CFLAGS) $? options_f.o: $(srcdir)/common/options_f.c $(CC) $(CFLAGS) $? put.o: $(srcdir)/common/put.c $(CC) $(CFLAGS) $? screen.o: $(srcdir)/common/screen.c $(CC) $(CFLAGS) $? search.o: $(srcdir)/common/search.c $(CC) $(CFLAGS) $? seq.o: $(srcdir)/common/seq.c $(CC) $(CFLAGS) $? recover.o: $(srcdir)/common/recover.c $(CC) $(CFLAGS) $? util.o: $(srcdir)/common/util.c $(CC) $(CFLAGS) $? ex.o: $(srcdir)/ex/ex.c $(CC) $(CFLAGS) $? ex_abbrev.o: $(srcdir)/ex/ex_abbrev.c $(CC) $(CFLAGS) $? ex_append.o: $(srcdir)/ex/ex_append.c $(CC) $(CFLAGS) $? ex_args.o: $(srcdir)/ex/ex_args.c $(CC) $(CFLAGS) $? ex_argv.o: $(srcdir)/ex/ex_argv.c $(CC) $(CFLAGS) $? ex_at.o: $(srcdir)/ex/ex_at.c $(CC) $(CFLAGS) $? ex_bang.o: $(srcdir)/ex/ex_bang.c $(CC) $(CFLAGS) $? ex_cd.o: $(srcdir)/ex/ex_cd.c $(CC) $(CFLAGS) $? ex_cmd.o: $(srcdir)/ex/ex_cmd.c $(CC) $(CFLAGS) $? ex_cscope.o: $(srcdir)/ex/ex_cscope.c $(CC) $(CFLAGS) $? ex_delete.o: $(srcdir)/ex/ex_delete.c $(CC) $(CFLAGS) $? ex_digraph.o: $(srcdir)/ex/ex_digraph.c $(CC) $(CFLAGS) $? ex_display.o: $(srcdir)/ex/ex_display.c $(CC) $(CFLAGS) $? ex_edit.o: $(srcdir)/ex/ex_edit.c $(CC) $(CFLAGS) $? ex_equal.o: $(srcdir)/ex/ex_equal.c $(CC) $(CFLAGS) $? ex_file.o: $(srcdir)/ex/ex_file.c $(CC) $(CFLAGS) $? ex_filter.o: $(srcdir)/ex/ex_filter.c $(CC) $(CFLAGS) $? ex_global.o: $(srcdir)/ex/ex_global.c $(CC) $(CFLAGS) $? ex_init.o: $(srcdir)/ex/ex_init.c $(CC) $(CFLAGS) $? ex_join.o: $(srcdir)/ex/ex_join.c $(CC) $(CFLAGS) $? ex_map.o: $(srcdir)/ex/ex_map.c $(CC) $(CFLAGS) $? ex_mark.o: $(srcdir)/ex/ex_mark.c $(CC) $(CFLAGS) $? ex_mkexrc.o: $(srcdir)/ex/ex_mkexrc.c $(CC) $(CFLAGS) $? ex_move.o: $(srcdir)/ex/ex_move.c $(CC) $(CFLAGS) $? ex_open.o: $(srcdir)/ex/ex_open.c $(CC) $(CFLAGS) $? ex_perl.o: $(srcdir)/ex/ex_perl.c $(CC) $(CFLAGS) $? ex_preserve.o: $(srcdir)/ex/ex_preserve.c $(CC) $(CFLAGS) $? ex_print.o: $(srcdir)/ex/ex_print.c $(CC) $(CFLAGS) $? ex_put.o: $(srcdir)/ex/ex_put.c $(CC) $(CFLAGS) $? ex_quit.o: $(srcdir)/ex/ex_quit.c $(CC) $(CFLAGS) $? ex_read.o: $(srcdir)/ex/ex_read.c $(CC) $(CFLAGS) $? ex_screen.o: $(srcdir)/ex/ex_screen.c $(CC) $(CFLAGS) $? ex_script.o: $(srcdir)/ex/ex_script.c $(CC) $(CFLAGS) $? ex_set.o: $(srcdir)/ex/ex_set.c $(CC) $(CFLAGS) $? ex_shell.o: $(srcdir)/ex/ex_shell.c $(CC) $(CFLAGS) $? ex_shift.o: $(srcdir)/ex/ex_shift.c $(CC) $(CFLAGS) $? ex_source.o: $(srcdir)/ex/ex_source.c $(CC) $(CFLAGS) $? ex_stop.o: $(srcdir)/ex/ex_stop.c $(CC) $(CFLAGS) $? ex_subst.o: $(srcdir)/ex/ex_subst.c $(CC) $(CFLAGS) $? ex_tag.o: $(srcdir)/ex/ex_tag.c $(CC) $(CFLAGS) $? ex_tcl.o: $(srcdir)/ex/ex_tcl.c $(CC) $(CFLAGS) $? ex_txt.o: $(srcdir)/ex/ex_txt.c $(CC) $(CFLAGS) $? ex_undo.o: $(srcdir)/ex/ex_undo.c $(CC) $(CFLAGS) $? ex_usage.o: $(srcdir)/ex/ex_usage.c $(CC) $(CFLAGS) $? ex_util.o: $(srcdir)/ex/ex_util.c $(CC) $(CFLAGS) $? ex_version.o: $(srcdir)/ex/ex_version.c $(CC) $(CFLAGS) $? ex_visual.o: $(srcdir)/ex/ex_visual.c $(CC) $(CFLAGS) $? ex_write.o: $(srcdir)/ex/ex_write.c $(CC) $(CFLAGS) $? ex_yank.o: $(srcdir)/ex/ex_yank.c $(CC) $(CFLAGS) $? ex_z.o: $(srcdir)/ex/ex_z.c $(CC) $(CFLAGS) $? getc.o: $(srcdir)/vi/getc.c $(CC) $(CFLAGS) $? v_at.o: $(srcdir)/vi/v_at.c $(CC) $(CFLAGS) $? v_ch.o: $(srcdir)/vi/v_ch.c $(CC) $(CFLAGS) $? v_cmd.o: $(srcdir)/vi/v_cmd.c $(CC) $(CFLAGS) $? v_delete.o: $(srcdir)/vi/v_delete.c $(CC) $(CFLAGS) $? v_ex.o: $(srcdir)/vi/v_ex.c $(CC) $(CFLAGS) $? v_increment.o: $(srcdir)/vi/v_increment.c $(CC) $(CFLAGS) $? v_init.o: $(srcdir)/vi/v_init.c $(CC) $(CFLAGS) $? v_itxt.o: $(srcdir)/vi/v_itxt.c $(CC) $(CFLAGS) $? v_left.o: $(srcdir)/vi/v_left.c $(CC) $(CFLAGS) $? v_mark.o: $(srcdir)/vi/v_mark.c $(CC) $(CFLAGS) $? v_match.o: $(srcdir)/vi/v_match.c $(CC) $(CFLAGS) $? v_paragraph.o: $(srcdir)/vi/v_paragraph.c $(CC) $(CFLAGS) $? v_put.o: $(srcdir)/vi/v_put.c $(CC) $(CFLAGS) $? v_redraw.o: $(srcdir)/vi/v_redraw.c $(CC) $(CFLAGS) $? v_replace.o: $(srcdir)/vi/v_replace.c $(CC) $(CFLAGS) $? v_right.o: $(srcdir)/vi/v_right.c $(CC) $(CFLAGS) $? v_screen.o: $(srcdir)/vi/v_screen.c $(CC) $(CFLAGS) $? v_scroll.o: $(srcdir)/vi/v_scroll.c $(CC) $(CFLAGS) $? v_search.o: $(srcdir)/vi/v_search.c $(CC) $(CFLAGS) $? v_section.o: $(srcdir)/vi/v_section.c $(CC) $(CFLAGS) $? v_sentence.o: $(srcdir)/vi/v_sentence.c $(CC) $(CFLAGS) $? v_status.o: $(srcdir)/vi/v_status.c $(CC) $(CFLAGS) $? v_txt.o: $(srcdir)/vi/v_txt.c $(CC) -c @no_op_OPTFLAG@ -I. -I$(srcdir)/include @CPPFLAGS@ @CFLAGS@ $? v_ulcase.o: $(srcdir)/vi/v_ulcase.c $(CC) $(CFLAGS) $? v_undo.o: $(srcdir)/vi/v_undo.c $(CC) $(CFLAGS) $? v_util.o: $(srcdir)/vi/v_util.c $(CC) $(CFLAGS) $? v_word.o: $(srcdir)/vi/v_word.c $(CC) $(CFLAGS) $? v_xchar.o: $(srcdir)/vi/v_xchar.c $(CC) $(CFLAGS) $? v_yank.o: $(srcdir)/vi/v_yank.c $(CC) $(CFLAGS) $? v_z.o: $(srcdir)/vi/v_z.c $(CC) $(CFLAGS) $? v_zexit.o: $(srcdir)/vi/v_zexit.c $(CC) $(CFLAGS) $? vi.o: $(srcdir)/vi/vi.c $(CC) $(CFLAGS) $? vs_line.o: $(srcdir)/vi/vs_line.c $(CC) $(CFLAGS) $? vs_msg.o: $(srcdir)/vi/vs_msg.c $(CC) $(CFLAGS) $? vs_refresh.o: $(srcdir)/vi/vs_refresh.c $(CC) $(CFLAGS) $? vs_relative.o: $(srcdir)/vi/vs_relative.c $(CC) $(CFLAGS) $? vs_smap.o: $(srcdir)/vi/vs_smap.c $(CC) $(CFLAGS) $? vs_split.o: $(srcdir)/vi/vs_split.c $(CC) $(CFLAGS) $? addbytes.o: $(srcdir)/curses/addbytes.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? addch.o: $(srcdir)/curses/addch.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? box.o: $(srcdir)/curses/box.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? clear.o: $(srcdir)/curses/clear.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? clrtobot.o: $(srcdir)/curses/clrtobot.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? clrtoeol.o: $(srcdir)/curses/clrtoeol.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? cr_put.o: $(srcdir)/curses/cr_put.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? ctrace.o: $(srcdir)/curses/ctrace.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? cur_hash.o: $(srcdir)/curses/cur_hash.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? curses.o: $(srcdir)/curses/curses.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? delch.o: $(srcdir)/curses/delch.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? deleteln.o: $(srcdir)/curses/deleteln.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? delwin.o: $(srcdir)/curses/delwin.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? erase.o: $(srcdir)/curses/erase.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? fullname.o: $(srcdir)/curses/fullname.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? getch.o: $(srcdir)/curses/getch.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? getstr.o: $(srcdir)/curses/getstr.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? id_subwins.o: $(srcdir)/curses/id_subwins.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? idlok.o: $(srcdir)/curses/idlok.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? initscr.o: $(srcdir)/curses/initscr.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? insch.o: $(srcdir)/curses/insch.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? insertln.o: $(srcdir)/curses/insertln.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? longname.o: $(srcdir)/curses/longname.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? move.o: $(srcdir)/curses/move.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? mvwin.o: $(srcdir)/curses/mvwin.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? newwin.o: $(srcdir)/curses/newwin.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? overlay.o: $(srcdir)/curses/overlay.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? overwrite.o: $(srcdir)/curses/overwrite.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? putchar.o: $(srcdir)/curses/putchar.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? refresh.o: $(srcdir)/curses/refresh.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? scroll.o: $(srcdir)/curses/scroll.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? setterm.o: $(srcdir)/curses/setterm.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? standout.o: $(srcdir)/curses/standout.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? toucholap.o: $(srcdir)/curses/toucholap.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? touchwin.o: $(srcdir)/curses/touchwin.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? tscroll.o: $(srcdir)/curses/tscroll.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? tstp.o: $(srcdir)/curses/tstp.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? tty.o: $(srcdir)/curses/tty.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? unctrl.o: $(srcdir)/curses/unctrl.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? waddnstr.o: $(srcdir)/curses/waddnstr.c $(CC) -D_CURSES_PRIVATE $(CFLAGS) $? # DB sources. db.o: $(srcdir)/db/db/db.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) $? mpool.o: $(srcdir)/db/mpool/mpool.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/mpool $? bt_close.o: $(srcdir)/db/btree/bt_close.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_conv.o: $(srcdir)/db/btree/bt_conv.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_debug.o: $(srcdir)/db/btree/bt_debug.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_delete.o: $(srcdir)/db/btree/bt_delete.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_get.o: $(srcdir)/db/btree/bt_get.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_open.o: $(srcdir)/db/btree/bt_open.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_overflow.o: $(srcdir)/db/btree/bt_overflow.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_page.o: $(srcdir)/db/btree/bt_page.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_put.o: $(srcdir)/db/btree/bt_put.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_search.o: $(srcdir)/db/btree/bt_search.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_seq.o: $(srcdir)/db/btree/bt_seq.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_split.o: $(srcdir)/db/btree/bt_split.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? bt_utils.o: $(srcdir)/db/btree/bt_utils.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/btree $? rec_close.o: $(srcdir)/db/recno/rec_close.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? rec_delete.o: $(srcdir)/db/recno/rec_delete.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? rec_get.o: $(srcdir)/db/recno/rec_get.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? rec_open.o: $(srcdir)/db/recno/rec_open.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? rec_put.o: $(srcdir)/db/recno/rec_put.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? rec_search.o: $(srcdir)/db/recno/rec_search.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? rec_seq.o: $(srcdir)/db/recno/rec_seq.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? rec_utils.o: $(srcdir)/db/recno/rec_utils.c $(CC) -D__DBINTERFACE_PRIVATE $(CFLAGS) -I$(srcdir)/db/recno $? # Regular Expressions sources. regcomp.o: $(srcdir)/regex/regcomp.c $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? regerror.o: $(srcdir)/regex/regerror.c $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? regexec.o: $(srcdir)/regex/regexec.c $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? regfree.o: $(srcdir)/regex/regfree.c $(CC) -D__REGEX_PRIVATE $(CFLAGS) $? # Random replacement and workaround sources. addnstr.o: $(srcdir)/clib/addnstr.c $(CC) $(CFLAGS) $? bsearch.o: $(srcdir)/clib/bsearch.c $(CC) $(CFLAGS) $? env.o: $(srcdir)/clib/env.c $(CC) $(CFLAGS) $? fchmod.o: $(srcdir)/clib/fchmod.c $(CC) $(CFLAGS) $(INC) $? gethostname.o: $(srcdir)/clib/gethostname.c $(CC) $(CFLAGS) $(INC) $? getopt.o: $(srcdir)/clib/getopt.c $(CC) $(CFLAGS) $(INC) $? memchr.o: $(srcdir)/clib/memchr.c $(CC) $(CFLAGS) $? memcpy.o: $(srcdir)/clib/memmove.c $(cp) $? memcpy.c $(CC) $(CFLAGS) -DMEMCOPY memcpy.c memmove.o: $(srcdir)/clib/memmove.c $(CC) $(CFLAGS) -DMEMMOVE $? memset.o: $(srcdir)/clib/memset.c $(CC) $(CFLAGS) $? mkstemp.o: $(srcdir)/clib/mkstemp.c $(CC) $(CFLAGS) $? mmap.o: $(srcdir)/clib/mmap.c $(CC) $(CFLAGS) $? realloc.o: $(srcdir)/clib/realloc.c $(CC) $(CFLAGS) $? snprintf.o: $(srcdir)/clib/snprintf.c $(CC) $(CFLAGS) $? strdup.o: $(srcdir)/clib/strdup.c $(CC) $(CFLAGS) $? strerror.o: $(srcdir)/clib/strerror.c $(CC) $(CFLAGS) $? strpbrk.o: $(srcdir)/clib/strpbrk.c $(CC) $(CFLAGS) $? strsep.o: $(srcdir)/clib/strsep.c $(CC) $(CFLAGS) $? strtol.o: $(srcdir)/clib/strtol.c $(CC) $(CFLAGS) $? strtoul.o: $(srcdir)/clib/strtoul.c $(CC) $(CFLAGS) $? vsnprintf.o: $(srcdir)/clib/vsnprintf.c $(CC) $(CFLAGS) $? vigor-0.016.orig/clib/0040755000076400007640000000000007103707263013207 5ustar cjw44cjw44vigor-0.016.orig/clib/gethostname.c0100644000076400007640000000057607103707263015676 0ustar cjw44cjw44#include "config.h" /* * Solaris doesn't include the gethostname call by default. */ #include #include #include /* * PUBLIC: #ifndef HAVE_GETHOSTNAME * PUBLIC: int gethostname __P((char *, int)); * PUBLIC: #endif */ int gethostname(host, len) char *host; int len; { return (sysinfo(SI_HOSTNAME, host, len) == -1 ? -1 : 0); } vigor-0.016.orig/clib/snprintf.c0100644000076400007640000000125607103707263015217 0ustar cjw44cjw44#include "config.h" #include #include #ifdef __STDC__ #include #else #include #endif /* * PUBLIC: #ifndef HAVE_SNPRINTF * PUBLIC: int snprintf __P((char *, size_t, const char *, ...)); * PUBLIC: #endif */ int #ifdef __STDC__ snprintf(char *str, size_t n, const char *fmt, ...) #else snprintf(str, n, fmt, va_alist) char *str; size_t n; const char *fmt; va_dcl #endif { va_list ap; int rval; #ifdef __STDC__ va_start(ap, fmt); #else va_start(ap); #endif #ifdef SPRINTF_RET_CHARPNT (void)vsprintf(str, fmt, ap); va_end(ap); return (strlen(str)); #else rval = vsprintf(str, fmt, ap); va_end(ap); return (rval); #endif } vigor-0.016.orig/clib/mmap.c0100644000076400007640000000166207103707263014307 0ustar cjw44cjw44#include "config.h" #include #include #include /* * This function fakes mmap() by reading `len' bytes from the file descriptor * `fd' and returning a pointer to that memory. The "mapped" region can later * be deallocated with munmap(). * * Note: ONLY reading is supported and only reading of the exact size of the * file will work. * * PUBLIC: #ifndef HAVE_MMAP * PUBLIC: char *mmap __P((char *, size_t, int, int, int, off_t)); * PUBLIC: #endif */ char * mmap(addr, len, prot, flags, fd, off) char *addr; size_t len; int prot, flags, fd; off_t off; { char *ptr; if ((ptr = (char *)malloc(len)) == 0) return ((char *)-1); if (read(fd, ptr, len) < 0) { free(ptr); return ((char *)-1); } return (ptr); } /* * PUBLIC: #ifndef HAVE_MMAP * PUBLIC: int munmap __P((char *, size_t)); * PUBLIC: #endif */ int munmap(addr, len) char *addr; size_t len; { free(addr); return (0); } vigor-0.016.orig/clib/strtoul.c0100644000076400007640000000672007103707263015071 0ustar cjw44cjw44/* * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)strtoul.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include /* * Convert a string to an unsigned long integer. * * Ignores `locale' stuff. Assumes that the upper and lower case * alphabets and digits are each contiguous. * * PUBLIC: #ifndef HAVE_STRTOUL * PUBLIC: unsigned long strtoul __P((const char *, char **, int)); * PUBLIC: #endif */ unsigned long strtoul(nptr, endptr, base) const char *nptr; char **endptr; register int base; { register const char *s = nptr; register unsigned long acc; register int c; register unsigned long cutoff; register int neg = 0, any, cutlim; /* * See strtol for comments as to the logic used. */ do { c = *s++; } while (isspace(c)); if (c == '-') { neg = 1; c = *s++; } else if (c == '+') c = *s++; if ((base == 0 || base == 16) && c == '0' && (*s == 'x' || *s == 'X')) { c = s[1]; s += 2; base = 16; } if (base == 0) base = c == '0' ? 8 : 10; cutoff = (unsigned long)ULONG_MAX / (unsigned long)base; cutlim = (unsigned long)ULONG_MAX % (unsigned long)base; for (acc = 0, any = 0;; c = *s++) { if (isdigit(c)) c -= '0'; else if (isalpha(c)) c -= isupper(c) ? 'A' - 10 : 'a' - 10; else break; if (c >= base) break; if (any < 0 || acc > cutoff || acc == cutoff && c > cutlim) any = -1; else { any = 1; acc *= base; acc += c; } } if (any < 0) { acc = ULONG_MAX; errno = ERANGE; } else if (neg) acc = -acc; if (endptr != 0) *endptr = (char *)(any ? s - 1 : nptr); return (acc); } vigor-0.016.orig/clib/strerror.c0100644000076400007640000000521407103707263015234 0ustar cjw44cjw44/* * Copyright (c) 1988, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)strerror.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include /* * PUBLIC: #ifndef HAVE_STRERROR * PUBLIC: char *strerror __P((int)); * PUBLIC: #endif */ char * strerror(num) int num; { extern int sys_nerr; extern char *sys_errlist[]; #define UPREFIX "Unknown error: " static char ebuf[40] = UPREFIX; /* 64-bit number + slop */ register unsigned int errnum; register char *p, *t; char tmp[40]; errnum = num; /* convert to unsigned */ if (errnum < sys_nerr) return(sys_errlist[errnum]); /* Do this by hand, so we don't include stdio(3). */ t = tmp; do { *t++ = "0123456789"[errnum % 10]; } while (errnum /= 10); for (p = ebuf + sizeof(UPREFIX) - 1;;) { *p++ = *--t; if (t <= tmp) break; } return(ebuf); } vigor-0.016.orig/clib/memset.c0100644000076400007640000000756607103707263014660 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Mike Hibler and Chris Torek. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)memset.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include #include /* * PUBLIC: #ifndef HAVE_MEMSET * PUBLIC: void *memset __P((void *, int, size_t)); * PUBLIC: #endif */ #define wsize sizeof(u_int) #define wmask (wsize - 1) #ifdef BZERO #define RETURN return #define VAL 0 #define WIDEVAL 0 void bzero(dst0, length) void *dst0; register size_t length; #else #define RETURN return (dst0) #define VAL c0 #define WIDEVAL c void * memset(dst0, c0, length) void *dst0; register int c0; register size_t length; #endif { register size_t t; register u_int c; register u_char *dst; dst = dst0; /* * If not enough words, just fill bytes. A length >= 2 words * guarantees that at least one of them is `complete' after * any necessary alignment. For instance: * * |-----------|-----------|-----------| * |00|01|02|03|04|05|06|07|08|09|0A|00| * ^---------------------^ * dst dst+length-1 * * but we use a minimum of 3 here since the overhead of the code * to do word writes is substantial. */ if (length < 3 * wsize) { while (length != 0) { *dst++ = VAL; --length; } RETURN; } #ifndef BZERO if ((c = (u_char)c0) != 0) { /* Fill the word. */ c = (c << 8) | c; /* u_int is 16 bits. */ #if UINT_MAX > 0xffff c = (c << 16) | c; /* u_int is 32 bits. */ #endif #if UINT_MAX > 0xffffffff c = (c << 32) | c; /* u_int is 64 bits. */ #endif } #endif /* Align destination by filling in bytes. */ if ((t = (int)dst & wmask) != 0) { t = wsize - t; length -= t; do { *dst++ = VAL; } while (--t != 0); } /* Fill words. Length was >= 2*words so we know t >= 1 here. */ t = length / wsize; do { *(u_int *)dst = WIDEVAL; dst += wsize; } while (--t != 0); /* Mop up trailing bytes, if any. */ t = length & wmask; if (t != 0) do { *dst++ = VAL; } while (--t != 0); RETURN; } vigor-0.016.orig/clib/memmove.c0100644000076400007640000001046407103707263015022 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Chris Torek. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)bcopy.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include /* * sizeof(word) MUST BE A POWER OF TWO * SO THAT wmask BELOW IS ALL ONES */ typedef int word; /* "word" used for optimal copy speed */ #define wsize sizeof(word) #define wmask (wsize - 1) /* * Copy a block of memory, handling overlap. * This is the routine that actually implements * (the portable versions of) bcopy, memcpy, and memmove. * * PUBLIC: #ifndef HAVE_MEMCPY * PUBLIC: void *memcpy __P((void *, const void *, size_t)); * PUBLIC: #endif * PUBLIC: #ifndef HAVE_MEMMOVE * PUBLIC: void *memmove __P((void *, const void *, size_t)); * PUBLIC: #endif */ #ifdef MEMCOPY void * memcpy(dst0, src0, length) #else #ifdef MEMMOVE void * memmove(dst0, src0, length) #else void bcopy(src0, dst0, length) #endif #endif void *dst0; const void *src0; register size_t length; { register char *dst = dst0; register const char *src = src0; register size_t t; if (length == 0 || dst == src) /* nothing to do */ goto done; /* * Macros: loop-t-times; and loop-t-times, t>0 */ #define TLOOP(s) if (t) TLOOP1(s) #define TLOOP1(s) do { s; } while (--t) if ((unsigned long)dst < (unsigned long)src) { /* * Copy forward. */ t = (int)src; /* only need low bits */ if ((t | (int)dst) & wmask) { /* * Try to align operands. This cannot be done * unless the low bits match. */ if ((t ^ (int)dst) & wmask || length < wsize) t = length; else t = wsize - (t & wmask); length -= t; TLOOP1(*dst++ = *src++); } /* * Copy whole words, then mop up any trailing bytes. */ t = length / wsize; TLOOP(*(word *)dst = *(word *)src; src += wsize; dst += wsize); t = length & wmask; TLOOP(*dst++ = *src++); } else { /* * Copy backwards. Otherwise essentially the same. * Alignment works as before, except that it takes * (t&wmask) bytes to align, not wsize-(t&wmask). */ src += length; dst += length; t = (int)src; if ((t | (int)dst) & wmask) { if ((t ^ (int)dst) & wmask || length <= wsize) t = length; else t &= wmask; length -= t; TLOOP1(*--dst = *--src); } t = length / wsize; TLOOP(src -= wsize; dst -= wsize; *(word *)dst = *(word *)src); t = length & wmask; TLOOP(*--dst = *--src); } done: #if defined(MEMCOPY) || defined(MEMMOVE) return (dst0); #else return; #endif } vigor-0.016.orig/clib/env.c0100644000076400007640000001154707103707263014150 0ustar cjw44cjw44/* * Copyright (c) 1987, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)getenv.c 8.1 (Berkeley) 6/4/93"; static const char sccsid[] = "@(#)setenv.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include /* * __findenv -- * Returns pointer to value associated with name, if any, else NULL. * Sets offset to be the offset of the name/value combination in the * environmental array, for use by setenv(3) and unsetenv(3). * Explicitly removes '=' in argument name. * * This routine *should* be a static; don't use it. */ static char * __findenv(name, offset) register char *name; int *offset; { extern char **environ; register int len; register char *np; register char **p, *c; if (name == NULL || environ == NULL) return (NULL); for (np = name; *np && *np != '='; ++np) continue; len = np - name; for (p = environ; (c = *p) != NULL; ++p) if (strncmp(c, name, len) == 0 && c[len] == '=') { *offset = p - environ; return (c + len + 1); } return (NULL); } #ifndef HAVE_SETENV /* * setenv -- * Set the value of the environmental variable "name" to be * "value". If rewrite is set, replace any current value. * * PUBLIC: #ifndef HAVE_SETENV * PUBLIC: int setenv __P((const char *, const char *, int)); * PUBLIC: #endif */ setenv(name, value, rewrite) register char *name; register char *value; int rewrite; { extern char **environ; static int alloced; /* if allocated space before */ register char *c; int l_value, offset; if (*value == '=') /* no `=' in value */ ++value; l_value = strlen(value); if ((c = __findenv(name, &offset))) { /* find if already exists */ if (!rewrite) return (0); if (strlen(c) >= l_value) { /* old larger; copy over */ while (*c++ = *value++); return (0); } } else { /* create new slot */ register int cnt; register char **p; for (p = environ, cnt = 0; *p; ++p, ++cnt); if (alloced) { /* just increase size */ environ = (char **)realloc((char *)environ, (size_t)(sizeof(char *) * (cnt + 2))); if (!environ) return (-1); } else { /* get new space */ alloced = 1; /* copy old entries into it */ p = malloc((size_t)(sizeof(char *) * (cnt + 2))); if (!p) return (-1); memmove(p, environ, cnt * sizeof(char *)); environ = p; } environ[cnt + 1] = NULL; offset = cnt; } for (c = (char *)name; *c && *c != '='; ++c); /* no `=' in name */ if (!(environ[offset] = /* name + `=' + value */ malloc((size_t)((int)(c - name) + l_value + 2)))) return (-1); for (c = environ[offset]; (*c = *name++) && *c != '='; ++c); for (*c++ = '='; *c++ = *value++;); return (0); } #endif #ifndef HAVE_UNSETENV /* * unsetenv(name) -- * Delete environmental variable "name". * * PUBLIC: #ifndef HAVE_UNSETENV * PUBLIC: void unsetenv __P((const char *)); * PUBLIC: #endif */ void unsetenv(name) char *name; { extern char **environ; register char **p; int offset; while (__findenv(name, &offset)) /* if set multiple times */ for (p = &environ[offset];; ++p) if (!(*p = *(p + 1))) break; } #endif vigor-0.016.orig/clib/strdup.c0100644000076400007640000000450107103707263014671 0ustar cjw44cjw44/* * Copyright (c) 1988, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)strdup.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include /* * PUBLIC: #ifndef HAVE_STRDUP * PUBLIC: char *strdup __P((const char *)); * PUBLIC: #endif */ char * strdup(str) const char *str; { size_t len; char *copy; len = strlen(str) + 1; if (!(copy = malloc((u_int)len))) return (NULL); memcpy(copy, str, len); return (copy); } vigor-0.016.orig/clib/strpbrk.c0100644000076400007640000000463207103707263015044 0ustar cjw44cjw44/* * Copyright (c) 1985, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)strpbrk.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include /* * Find the first occurrence in s1 of a character in s2 (excluding NUL). * * PUBLIC: #ifndef HAVE_STRPBRK * PUBLIC: char *strpbrk __P((const char *, const char *)); * PUBLIC: #endif */ char * strpbrk(s1, s2) register const char *s1, *s2; { register const char *scanp; register int c, sc; while ((c = *s1++) != 0) { for (scanp = s2; (sc = *scanp++) != 0;) if (sc == c) return ((char *)(s1 - 1)); } return (NULL); } vigor-0.016.orig/clib/mkstemp.c0100644000076400007640000000676507103707263015046 0ustar cjw44cjw44/* * Copyright (c) 1987, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)mktemp.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include static int _gettemp(); /* * PUBLIC: #ifndef HAVE_MKSTEMP * PUBLIC: int mkstemp __P((char *)); * PUBLIC: #endif */ mkstemp(path) char *path; { int fd; return (_gettemp(path, &fd) ? fd : -1); } char * mktemp(path) char *path; { return(_gettemp(path, (int *)NULL) ? path : (char *)NULL); } static _gettemp(path, doopen) char *path; register int *doopen; { extern int errno; register char *start, *trv; struct stat sbuf; u_int pid; pid = getpid(); for (trv = path; *trv; ++trv); /* extra X's get set to 0's */ while (*--trv == 'X') { *trv = (pid % 10) + '0'; pid /= 10; } /* * check the target directory; if you have six X's and it * doesn't exist this runs for a *very* long time. */ for (start = trv + 1;; --trv) { if (trv <= path) break; if (*trv == '/') { *trv = '\0'; if (stat(path, &sbuf)) return(0); if (!S_ISDIR(sbuf.st_mode)) { errno = ENOTDIR; return(0); } *trv = '/'; break; } } for (;;) { if (doopen) { if ((*doopen = open(path, O_CREAT|O_EXCL|O_RDWR, 0600)) >= 0) return(1); if (errno != EEXIST) return(0); } else if (stat(path, &sbuf)) return(errno == ENOENT ? 1 : 0); /* tricky little algorithm for backward compatibility */ for (trv = start;;) { if (!*trv) return(0); if (*trv == 'z') *trv++ = 'a'; else { if (isdigit(*trv)) *trv = 'a'; else ++*trv; break; } } } /*NOTREACHED*/ } vigor-0.016.orig/clib/tags0120777000076400007640000000000007107504605016256 2../build/tagsustar cjw44cjw44vigor-0.016.orig/clib/vsnprintf.c0100644000076400007640000000073707103707263015410 0ustar cjw44cjw44#include "config.h" #include #include #ifdef __STDC__ #include #else #include #endif /* * PUBLIC: #ifndef HAVE_VSNPRINTF * PUBLIC: int vsnprintf __P((char *, size_t, const char *, ...)); * PUBLIC: #endif */ int vsnprintf(str, n, fmt, ap) char *str; size_t n; const char *fmt; va_list ap; { #ifdef SPRINTF_RET_CHARPNT (void)vsprintf(str, fmt, ap); return (strlen(str)); #else return (vsprintf(str, fmt, ap)); #endif } vigor-0.016.orig/clib/bsearch.c0100644000076400007640000000700707103707263014763 0ustar cjw44cjw44/* * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)bsearch.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include #include "port.h" /* * Perform a binary search. * * The code below is a bit sneaky. After a comparison fails, we * divide the work in half by moving either left or right. If lim * is odd, moving left simply involves halving lim: e.g., when lim * is 5 we look at item 2, so we change lim to 2 so that we will * look at items 0 & 1. If lim is even, the same applies. If lim * is odd, moving right again involes halving lim, this time moving * the base up one item past p: e.g., when lim is 5 we change base * to item 3 and make lim 2 so that we will look at items 3 and 4. * If lim is even, however, we have to shrink it by one before * halving: e.g., when lim is 4, we still looked at item 2, so we * have to make lim 3, then halve, obtaining 1, so that we will only * look at item 3. * * PUBLIC: #ifndef HAVE_BSEARCH * PUBLIC: void *bsearch __P((const void *, const void *, size_t, * PUBLIC: size_t, int (*)(const void *, const void *))); * PUBLIC: #endif */ void * bsearch(key, base0, nmemb, size, compar) register const void *key; const void *base0; size_t nmemb; register size_t size; register int (*compar) __P((const void *, const void *)); { register const char *base = base0; register size_t lim; register int cmp; register const void *p; for (lim = nmemb; lim != 0; lim >>= 1) { p = base + (lim >> 1) * size; cmp = (*compar)(key, p); if (cmp == 0) return ((void *)p); if (cmp > 0) { /* key > p: move right */ base = (char *)p + size; lim--; } /* else move left */ } return (NULL); } vigor-0.016.orig/clib/memchr.c0100644000076400007640000000463307103707263014631 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Chris Torek. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)memchr.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include /* * PUBLIC: #ifndef HAVE_MEMCHR * PUBLIC: void *memchr __P((const void *, int, size_t)); * PUBLIC: #endif */ void * memchr(s, c, n) const void *s; register unsigned char c; register size_t n; { if (n != 0) { register const unsigned char *p = s; do { if (*p++ == c) return ((void *)(p - 1)); } while (--n != 0); } return (NULL); } vigor-0.016.orig/clib/strtol.c0100644000076400007640000001057407103707263014706 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)strtol.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include /* * Convert a string to a long integer. * * Ignores `locale' stuff. Assumes that the upper and lower case * alphabets and digits are each contiguous. * * PUBLIC: #ifndef HAVE_STRTOL * PUBLIC: long strtol __P((const char *, char **, int)); * PUBLIC: #endif */ long strtol(nptr, endptr, base) const char *nptr; char **endptr; register int base; { register const char *s = nptr; register unsigned long acc; register int c; register unsigned long cutoff; register int neg = 0, any, cutlim; /* * Skip white space and pick up leading +/- sign if any. * If base is 0, allow 0x for hex and 0 for octal, else * assume decimal; if base is already 16, allow 0x. */ do { c = *s++; } while (isspace(c)); if (c == '-') { neg = 1; c = *s++; } else if (c == '+') c = *s++; if ((base == 0 || base == 16) && c == '0' && (*s == 'x' || *s == 'X')) { c = s[1]; s += 2; base = 16; } if (base == 0) base = c == '0' ? 8 : 10; /* * Compute the cutoff value between legal numbers and illegal * numbers. That is the largest legal value, divided by the * base. An input number that is greater than this value, if * followed by a legal input character, is too big. One that * is equal to this value may be valid or not; the limit * between valid and invalid numbers is then based on the last * digit. For instance, if the range for longs is * [-2147483648..2147483647] and the input base is 10, * cutoff will be set to 214748364 and cutlim to either * 7 (neg==0) or 8 (neg==1), meaning that if we have accumulated * a value > 214748364, or equal but the next digit is > 7 (or 8), * the number is too big, and we will return a range error. * * Set any if any `digits' consumed; make it negative to indicate * overflow. */ cutoff = neg ? -(unsigned long)LONG_MIN : LONG_MAX; cutlim = cutoff % (unsigned long)base; cutoff /= (unsigned long)base; for (acc = 0, any = 0;; c = *s++) { if (isdigit(c)) c -= '0'; else if (isalpha(c)) c -= isupper(c) ? 'A' - 10 : 'a' - 10; else break; if (c >= base) break; if (any < 0 || acc > cutoff || acc == cutoff && c > cutlim) any = -1; else { any = 1; acc *= base; acc += c; } } if (any < 0) { acc = neg ? LONG_MIN : LONG_MAX; errno = ERANGE; } else if (neg) acc = -acc; if (endptr != 0) *endptr = (char *)(any ? s - 1 : nptr); return (acc); } vigor-0.016.orig/clib/getopt.c0100644000076400007640000001010707103707263014651 0ustar cjw44cjw44/* * Copyright (c) 1987, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)getopt.c 8.2 (Berkeley) 4/2/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include int opterr = 1, /* if error message should be printed */ optind = 1, /* index into parent argv vector */ optopt, /* character checked for validity */ optreset; /* reset getopt */ char *optarg; /* argument associated with option */ #define BADCH (int)'?' #define BADARG (int)':' #define EMSG "" /* * getopt -- * Parse argc/argv argument vector. * * PUBLIC: #ifndef HAVE_GETOPT * PUBLIC: int getopt __P((int, char * const *, const char *)); * PUBLIC: #endif */ int getopt(nargc, nargv, ostr) int nargc; char * const *nargv; const char *ostr; { static char *progname; static char *place = EMSG; /* option letter processing */ char *oli; /* option letter list index */ if (!progname) { if ((progname = strrchr(*nargv, '/')) == NULL) progname = *nargv; else ++progname; } if (optreset || !*place) { /* update scanning pointer */ optreset = 0; if (optind >= nargc || *(place = nargv[optind]) != '-') { place = EMSG; return (EOF); } if (place[1] && *++place == '-') { /* found "--" */ ++optind; place = EMSG; return (EOF); } } /* option letter okay? */ if ((optopt = (int)*place++) == (int)':' || !(oli = strchr(ostr, optopt))) { /* * if the user didn't specify '-' as an option, * assume it means EOF. */ if (optopt == (int)'-') return (EOF); if (!*place) ++optind; if (opterr && *ostr != ':') (void)fprintf(stderr, "%s: illegal option -- %c\n", progname, optopt); return (BADCH); } if (*++oli != ':') { /* don't need argument */ optarg = NULL; if (!*place) ++optind; } else { /* need an argument */ if (*place) /* no white space */ optarg = place; else if (nargc <= ++optind) { /* no arg */ place = EMSG; if (*ostr == ':') return (BADARG); if (opterr) (void)fprintf(stderr, "%s: option requires an argument -- %c\n", progname, optopt); return (BADCH); } else /* white space */ optarg = nargv[optind]; place = EMSG; ++optind; } return (optopt); /* dump back option letter */ } vigor-0.016.orig/clib/strsep.c0100644000076400007640000000572107103707263014675 0ustar cjw44cjw44/*- * Copyright (c) 1990, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "config.h" #if defined(LIBC_SCCS) && !defined(lint) static const char sccsid[] = "@(#)strsep.c 8.1 (Berkeley) 6/4/93"; #endif /* LIBC_SCCS and not lint */ #include #include /* * Get next token from string *stringp, where tokens are possibly-empty * strings separated by characters from delim. * * Writes NULs into the string at *stringp to end tokens. * delim need not remain constant from call to call. * On return, *stringp points past the last NUL written (if there might * be further tokens), or is NULL (if there are definitely no more tokens). * * If *stringp is NULL, strsep returns NULL. * * PUBLIC: #ifndef HAVE_STRSEP * PUBLIC: char *strsep __P((char **, const char *)); * PUBLIC: #endif */ char * strsep(stringp, delim) register char **stringp; register const char *delim; { register char *s; register const char *spanp; register int c, sc; char *tok; if ((s = *stringp) == NULL) return (NULL); for (tok = s;;) { c = *s++; spanp = delim; do { if ((sc = *spanp++) == c) { if (c == 0) s = NULL; else s[-1] = 0; *stringp = s; return (tok); } } while (sc != 0); } /* NOTREACHED */ } vigor-0.016.orig/perl_scripts/0040755000076400007640000000000007103707263015007 5ustar cjw44cjw44vigor-0.016.orig/perl_scripts/forall.pl0100644000076400007640000000027707103707263016626 0ustar cjw44cjw44sub forall { my ($code) = shift; my ($i) = $VI::StartLine-1; while (++$i <= $VI::StopLine) { $_ = $curscr->GetLine($i); VI::SetLine($VI::ScreenId, $i, $_) if(&$code); } } 1; vigor-0.016.orig/perl_scripts/tk.pl0100644000076400007640000000066007103707263015761 0ustar cjw44cjw44# make sure every subprocess has it's exit and that the main one # hasn't sub fun { unless ($pid = fork) { unless (fork) { use Tk; $MW = MainWindow->new; $hello = $MW->Button( -text => 'Hello, world', -command => sub {exit;}, ); $hello->pack; MainLoop; } exit 0; } waitpid($pid, 0); } 1; vigor-0.016.orig/perl_scripts/wc.pl0100644000076400007640000000025307103707263015752 0ustar cjw44cjw44sub wc { my $words; $i = $VI::StartLine; while ($i <= $VI::StopLine) { $_ = $curscr->GetLine($i++); $words+=split; } $curscr->Msg("$words words"); } 1; vigor-0.016.orig/perl_scripts/make.pl0100644000076400007640000000106407103707263016257 0ustar cjw44cjw44sub make { open MAKE, "make 2>&1 1>/dev/null |"; while() { if (($file, $line, $msg) = /([^: ]*):(\d*):(.+)/) { if ($file == $prevfile && $line == $prevline) { $error[-1]->[2] .= "\n$msg"; } else { push @error, [$file, $line, $msg]; ($prevline, $prevfile) = ($line, $file); } } } close MAKE; } sub nexterror { if ($index <= $#error) { my $error = $error[$index++]; $curscr->Edit($error->[0]); $curscr->SetCursor($error->[1],0); $curscr->Msg($error->[2]); } } # preverror is left as an exercise 1; vigor-0.016.orig/regex/0040755000076400007640000000000007103707264013411 5ustar cjw44cjw44vigor-0.016.orig/regex/utils.h0100644000076400007640000000472007103707263014721 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)utils.h 8.2 (Berkeley) 3/16/94 */ /* utility definitions */ #define DUPMAX _POSIX2_RE_DUP_MAX /* xxx is this right? */ #define INFINITY (DUPMAX + 1) #define NC (CHAR_MAX - CHAR_MIN + 1) typedef unsigned char uch; /* switch off assertions (if not already off) if no REDEBUG */ #ifndef REDEBUG #ifndef NDEBUG #define NDEBUG /* no assertions please */ #endif #endif #include /* for old systems with bcopy() but no memmove() */ #ifdef USEBCOPY #define memmove(d, s, c) bcopy(s, d, c) #endif vigor-0.016.orig/regex/regex.h0100644000076400007640000000716707103707263014703 0ustar cjw44cjw44/*- * Copyright (c) 1992 Henry Spencer. * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)regex.h 8.1 (Berkeley) 6/2/93 */ #ifndef _REGEX_H_ #define _REGEX_H_ #ifdef __REGEX_PRIVATE #include "config.h" #include "port.h" #endif /* types */ typedef off_t regoff_t; typedef struct { int re_magic; size_t re_nsub; /* number of parenthesized subexpressions */ const char *re_endp; /* end pointer for REG_PEND */ struct re_guts *re_g; /* none of your business :-) */ } regex_t; typedef struct { regoff_t rm_so; /* start of match */ regoff_t rm_eo; /* end of match */ } regmatch_t; /* regcomp() flags */ #define REG_BASIC 0000 #define REG_EXTENDED 0001 #define REG_ICASE 0002 #define REG_NOSUB 0004 #define REG_NEWLINE 0010 #define REG_NOSPEC 0020 #define REG_PEND 0040 #define REG_DUMP 0200 /* regerror() flags */ #define REG_NOMATCH 1 #define REG_BADPAT 2 #define REG_ECOLLATE 3 #define REG_ECTYPE 4 #define REG_EESCAPE 5 #define REG_ESUBREG 6 #define REG_EBRACK 7 #define REG_EPAREN 8 #define REG_EBRACE 9 #define REG_BADBR 10 #define REG_ERANGE 11 #define REG_ESPACE 12 #define REG_BADRPT 13 #define REG_EMPTY 14 #define REG_ASSERT 15 #define REG_INVARG 16 #define REG_ATOI 255 /* convert name to number (!) */ #define REG_ITOA 0400 /* convert number to name (!) */ /* regexec() flags */ #define REG_NOTBOL 00001 #define REG_NOTEOL 00002 #define REG_STARTEND 00004 #define REG_TRACE 00400 /* tracing of execution */ #define REG_LARGE 01000 /* force large representation */ #define REG_BACKR 02000 /* force use of backref code */ int regcomp __P((regex_t *, const char *, int)); size_t regerror __P((int, const regex_t *, char *, size_t)); int regexec __P((const regex_t *, const char *, size_t, regmatch_t [], int)); void regfree __P((regex_t *)); #endif /* !_REGEX_H_ */ vigor-0.016.orig/regex/WHATSNEW0100644000076400007640000001232707103707263014575 0ustar cjw44cjw44# @(#)WHATSNEW 8.3 (Berkeley) 3/18/94 New in alpha3.4: The complex bug alluded to below has been fixed (in a slightly kludgey temporary way that may hurt efficiency a bit; this is another "get it out the door for 4.4" release). The tests at the end of the tests file have accordingly been uncommented. The primary sign of the bug was that something like a?b matching ab matched b rather than ab. (The bug was essentially specific to this exact situation, else it would have shown up earlier.) New in alpha3.3: The definition of word boundaries has been altered slightly, to more closely match the usual programming notion that "_" is an alphabetic. Stuff used for pre-ANSI systems is now in a subdir, and the makefile no longer alludes to it in mysterious ways. The makefile has generally been cleaned up some. Fixes have been made (again!) so that the regression test will run without -DREDEBUG, at the cost of weaker checking. A workaround for a bug in some folks' has been added. And some more things have been added to tests, including a couple right at the end which are commented out because the code currently flunks them (complex bug; fix coming). Plus the usual minor cleanup. New in alpha3.2: Assorted bits of cleanup and portability improvement (the development base is now a BSDI system using GCC instead of an ancient Sun system, and the newer compiler exposed some glitches). Fix for a serious bug that affected REs using many [] (including REG_ICASE REs because of the way they are implemented), *sometimes*, depending on memory-allocation patterns. The header-file prototypes no longer name the parameters, avoiding possible name conflicts. The possibility that some clot has defined CHAR_MIN as (say) `-128' instead of `(-128)' is now handled gracefully. "uchar" is no longer used as an internal type name (too many people have the same idea). Still the same old lousy performance, alas. New in alpha3.1: Basically nothing, this release is just a bookkeeping convenience. Stay tuned. New in alpha3.0: Performance is no better, alas, but some fixes have been made and some functionality has been added. (This is basically the "get it out the door in time for 4.4" release.) One bug fix: regfree() didn't free the main internal structure (how embarrassing). It is now possible to put NULs in either the RE or the target string, using (resp.) a new REG_PEND flag and the old REG_STARTEND flag. The REG_NOSPEC flag to regcomp() makes all characters ordinary, so you can match a literal string easily (this will become more useful when performance improves!). There are now primitives to match beginnings and ends of words, although the syntax is disgusting and so is the implementation. The REG_ATOI debugging interface has changed a bit. And there has been considerable internal cleanup of various kinds. New in alpha2.3: Split change list out of README, and moved flags notes into Makefile. Macro-ized the name of regex(7) in regex(3), since it has to change for 4.4BSD. Cleanup work in engine.c, and some new regression tests to catch tricky cases thereof. New in alpha2.2: Out-of-date manpages updated. Regerror() acquires two small extensions -- REG_ITOA and REG_ATOI -- which avoid debugging kludges in my own test program and might be useful to others for similar purposes. The regression test will now compile (and run) without REDEBUG. The BRE \$ bug is fixed. Most uses of "uchar" are gone; it's all chars now. Char/uchar parameters are now written int/unsigned, to avoid possible portability problems with unpromoted parameters. Some unsigned casts have been introduced to minimize portability problems with shifting into sign bits. New in alpha2.1: Lots of little stuff, cleanup and fixes. The one big thing is that regex.h is now generated, using mkh, rather than being supplied in the distribution; due to circularities in dependencies, you have to build regex.h explicitly by "make h". The two known bugs have been fixed (and the regression test now checks for them), as has a problem with assertions not being suppressed in the absence of REDEBUG. No performance work yet. New in alpha2: Backslash-anything is an ordinary character, not an error (except, of course, for the handful of backslashed metacharacters in BREs), which should reduce script breakage. The regression test checks *where* null strings are supposed to match, and has generally been tightened up somewhat. Small bug fixes in parameter passing (not harmful, but technically errors) and some other areas. Debugging invoked by defining REDEBUG rather than not defining NDEBUG. New in alpha+3: full prototyping for internal routines, using a little helper program, mkh, which extracts prototypes given in stylized comments. More minor cleanup. Buglet fix: it's CHAR_BIT, not CHAR_BITS. Simple pre-screening of input when a literal string is known to be part of the RE; this does wonders for performance. New in alpha+2: minor bits of cleanup. Notably, the number "32" for the word width isn't hardwired into regexec.c any more, the public header file prototypes the functions if __STDC__ is defined, and some small typos in the manpages have been fixed. New in alpha+1: improvements to the manual pages, and an important extension, the REG_STARTEND option to regexec(). vigor-0.016.orig/regex/cclass.h0100644000076400007640000000562207103707263015033 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)cclass.h 8.2 (Berkeley) 3/16/94 */ /* character-class table */ static struct cclass { char *name; char *chars; char *multis; } cclasses[] = { "alnum", "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz\ 0123456789", "", "alpha", "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz", "", "blank", " \t", "", "cntrl", "\007\b\t\n\v\f\r\1\2\3\4\5\6\16\17\20\21\22\23\24\ \25\26\27\30\31\32\33\34\35\36\37\177", "", "digit", "0123456789", "", "graph", "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz\ 0123456789!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~", "", "lower", "abcdefghijklmnopqrstuvwxyz", "", "print", "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz\ 0123456789!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~ ", "", "punct", "!\"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~", "", "space", "\t\n\v\f\r ", "", "upper", "ABCDEFGHIJKLMNOPQRSTUVWXYZ", "", "xdigit", "0123456789ABCDEFabcdef", "", NULL, 0, "" }; vigor-0.016.orig/regex/cname.h0100644000076400007640000000750607103707263014651 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)cname.h 8.2 (Berkeley) 3/16/94 */ /* character-name table */ static struct cname { char *name; char code; } cnames[] = { "NUL", '\0', "SOH", '\001', "STX", '\002', "ETX", '\003', "EOT", '\004', "ENQ", '\005', "ACK", '\006', "BEL", '\007', "alert", '\007', "BS", '\010', "backspace", '\b', "HT", '\011', "tab", '\t', "LF", '\012', "newline", '\n', "VT", '\013', "vertical-tab", '\v', "FF", '\014', "form-feed", '\f', "CR", '\015', "carriage-return", '\r', "SO", '\016', "SI", '\017', "DLE", '\020', "DC1", '\021', "DC2", '\022', "DC3", '\023', "DC4", '\024', "NAK", '\025', "SYN", '\026', "ETB", '\027', "CAN", '\030', "EM", '\031', "SUB", '\032', "ESC", '\033', "IS4", '\034', "FS", '\034', "IS3", '\035', "GS", '\035', "IS2", '\036', "RS", '\036', "IS1", '\037', "US", '\037', "space", ' ', "exclamation-mark", '!', "quotation-mark", '"', "number-sign", '#', "dollar-sign", '$', "percent-sign", '%', "ampersand", '&', "apostrophe", '\'', "left-parenthesis", '(', "right-parenthesis", ')', "asterisk", '*', "plus-sign", '+', "comma", ',', "hyphen", '-', "hyphen-minus", '-', "period", '.', "full-stop", '.', "slash", '/', "solidus", '/', "zero", '0', "one", '1', "two", '2', "three", '3', "four", '4', "five", '5', "six", '6', "seven", '7', "eight", '8', "nine", '9', "colon", ':', "semicolon", ';', "less-than-sign", '<', "equals-sign", '=', "greater-than-sign", '>', "question-mark", '?', "commercial-at", '@', "left-square-bracket", '[', "backslash", '\\', "reverse-solidus", '\\', "right-square-bracket", ']', "circumflex", '^', "circumflex-accent", '^', "underscore", '_', "low-line", '_', "grave-accent", '`', "left-brace", '{', "left-curly-bracket", '{', "vertical-line", '|', "right-brace", '}', "right-curly-bracket", '}', "tilde", '~', "DEL", '\177', NULL, 0, }; vigor-0.016.orig/regex/engine.c0100644000076400007640000007033107103707263015022 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)engine.c 8.4 (Berkeley) 3/19/94 */ /* * The matching engine and friends. This file is #included by regexec.c * after suitable #defines of a variety of macros used herein, so that * different state representations can be used without duplicating masses * of code. */ #ifdef SNAMES #define matcher smatcher #define fast sfast #define slow sslow #define dissect sdissect #define backref sbackref #define step sstep #define print sprint #define at sat #define match smat #endif #ifdef LNAMES #define matcher lmatcher #define fast lfast #define slow lslow #define dissect ldissect #define backref lbackref #define step lstep #define print lprint #define at lat #define match lmat #endif /* another structure passed up and down to avoid zillions of parameters */ struct match { struct re_guts *g; int eflags; regmatch_t *pmatch; /* [nsub+1] (0 element unused) */ char *offp; /* offsets work from here */ char *beginp; /* start of string -- virtual NUL precedes */ char *endp; /* end of string -- virtual NUL here */ char *coldp; /* can be no match starting before here */ char **lastpos; /* [nplus+1] */ STATEVARS; states st; /* current states */ states fresh; /* states for a fresh start */ states tmp; /* temporary */ states empty; /* empty set of states */ }; /* ========= begin header generated by ./mkh ========= */ #ifdef __cplusplus extern "C" { #endif /* === engine.c === */ static int matcher __P((struct re_guts *g, char *string, size_t nmatch, regmatch_t pmatch[], int eflags)); static char *dissect __P((struct match *m, char *start, char *stop, sopno startst, sopno stopst)); static char *backref __P((struct match *m, char *start, char *stop, sopno startst, sopno stopst, sopno lev)); static char *fast __P((struct match *m, char *start, char *stop, sopno startst, sopno stopst)); static char *slow __P((struct match *m, char *start, char *stop, sopno startst, sopno stopst)); static states step __P((struct re_guts *g, sopno start, sopno stop, states bef, int ch, states aft)); #define BOL (OUT+1) #define EOL (BOL+1) #define BOLEOL (BOL+2) #define NOTHING (BOL+3) #define BOW (BOL+4) #define EOW (BOL+5) #define CODEMAX (BOL+5) /* highest code used */ #define NONCHAR(c) ((c) > CHAR_MAX) #define NNONCHAR (CODEMAX-CHAR_MAX) #ifdef REDEBUG static void print __P((struct match *m, char *caption, states st, int ch, FILE *d)); #endif #ifdef REDEBUG static void at __P((struct match *m, char *title, char *start, char *stop, sopno startst, sopno stopst)); #endif #ifdef REDEBUG static char *pchar __P((int ch)); #endif #ifdef __cplusplus } #endif /* ========= end header generated by ./mkh ========= */ #ifdef REDEBUG #define SP(t, s, c) print(m, t, s, c, stdout) #define AT(t, p1, p2, s1, s2) at(m, t, p1, p2, s1, s2) #define NOTE(str) { if (m->eflags®_TRACE) printf("=%s\n", (str)); } #else #define SP(t, s, c) /* nothing */ #define AT(t, p1, p2, s1, s2) /* nothing */ #define NOTE(s) /* nothing */ #endif /* - matcher - the actual matching engine == static int matcher(register struct re_guts *g, char *string, \ == size_t nmatch, regmatch_t pmatch[], int eflags); */ static int /* 0 success, REG_NOMATCH failure */ matcher(g, string, nmatch, pmatch, eflags) register struct re_guts *g; char *string; size_t nmatch; regmatch_t pmatch[]; int eflags; { register char *endp; register int i; struct match mv; register struct match *m = &mv; register char *dp; const register sopno gf = g->firststate+1; /* +1 for OEND */ const register sopno gl = g->laststate; char *start; char *stop; /* simplify the situation where possible */ if (g->cflags®_NOSUB) nmatch = 0; if (eflags®_STARTEND) { start = string + pmatch[0].rm_so; stop = string + pmatch[0].rm_eo; } else { start = string; stop = start + strlen(start); } if (stop < start) return(REG_INVARG); /* prescreening; this does wonders for this rather slow code */ if (g->must != NULL) { for (dp = start; dp < stop; dp++) if (*dp == g->must[0] && stop - dp >= g->mlen && memcmp(dp, g->must, (size_t)g->mlen) == 0) break; if (dp == stop) /* we didn't find g->must */ return(REG_NOMATCH); } /* match struct setup */ m->g = g; m->eflags = eflags; m->pmatch = NULL; m->lastpos = NULL; m->offp = string; m->beginp = start; m->endp = stop; STATESETUP(m, 4); SETUP(m->st); SETUP(m->fresh); SETUP(m->tmp); SETUP(m->empty); CLEAR(m->empty); /* this loop does only one repetition except for backrefs */ for (;;) { endp = fast(m, start, stop, gf, gl); if (endp == NULL) { /* a miss */ STATETEARDOWN(m); return(REG_NOMATCH); } if (nmatch == 0 && !g->backrefs) break; /* no further info needed */ /* where? */ assert(m->coldp != NULL); for (;;) { NOTE("finding start"); endp = slow(m, m->coldp, stop, gf, gl); if (endp != NULL) break; assert(m->coldp < m->endp); m->coldp++; } if (nmatch == 1 && !g->backrefs) break; /* no further info needed */ /* oh my, he wants the subexpressions... */ if (m->pmatch == NULL) m->pmatch = (regmatch_t *)malloc((m->g->nsub + 1) * sizeof(regmatch_t)); if (m->pmatch == NULL) { STATETEARDOWN(m); return(REG_ESPACE); } for (i = 1; i <= m->g->nsub; i++) m->pmatch[i].rm_so = m->pmatch[i].rm_eo = -1; if (!g->backrefs && !(m->eflags®_BACKR)) { NOTE("dissecting"); dp = dissect(m, m->coldp, endp, gf, gl); } else { if (g->nplus > 0 && m->lastpos == NULL) m->lastpos = (char **)malloc((g->nplus+1) * sizeof(char *)); if (g->nplus > 0 && m->lastpos == NULL) { free(m->pmatch); STATETEARDOWN(m); return(REG_ESPACE); } NOTE("backref dissect"); dp = backref(m, m->coldp, endp, gf, gl, (sopno)0); } if (dp != NULL) break; /* uh-oh... we couldn't find a subexpression-level match */ assert(g->backrefs); /* must be back references doing it */ assert(g->nplus == 0 || m->lastpos != NULL); for (;;) { if (dp != NULL || endp <= m->coldp) break; /* defeat */ NOTE("backoff"); endp = slow(m, m->coldp, endp-1, gf, gl); if (endp == NULL) break; /* defeat */ /* try it on a shorter possibility */ #ifndef NDEBUG for (i = 1; i <= m->g->nsub; i++) { assert(m->pmatch[i].rm_so == -1); assert(m->pmatch[i].rm_eo == -1); } #endif NOTE("backoff dissect"); dp = backref(m, m->coldp, endp, gf, gl, (sopno)0); } assert(dp == NULL || dp == endp); if (dp != NULL) /* found a shorter one */ break; /* despite initial appearances, there is no match here */ NOTE("false alarm"); start = m->coldp + 1; /* recycle starting later */ assert(start <= stop); } /* fill in the details if requested */ if (nmatch > 0) { pmatch[0].rm_so = m->coldp - m->offp; pmatch[0].rm_eo = endp - m->offp; } if (nmatch > 1) { assert(m->pmatch != NULL); for (i = 1; i < nmatch; i++) if (i <= m->g->nsub) pmatch[i] = m->pmatch[i]; else { pmatch[i].rm_so = -1; pmatch[i].rm_eo = -1; } } if (m->pmatch != NULL) free((char *)m->pmatch); if (m->lastpos != NULL) free((char *)m->lastpos); STATETEARDOWN(m); return(0); } /* - dissect - figure out what matched what, no back references == static char *dissect(register struct match *m, char *start, \ == char *stop, sopno startst, sopno stopst); */ static char * /* == stop (success) always */ dissect(m, start, stop, startst, stopst) register struct match *m; char *start; char *stop; sopno startst; sopno stopst; { register int i; register sopno ss; /* start sop of current subRE */ register sopno es; /* end sop of current subRE */ register char *sp; /* start of string matched by it */ register char *stp; /* string matched by it cannot pass here */ register char *rest; /* start of rest of string */ register char *tail; /* string unmatched by rest of RE */ register sopno ssub; /* start sop of subsubRE */ register sopno esub; /* end sop of subsubRE */ register char *ssp; /* start of string matched by subsubRE */ register char *sep; /* end of string matched by subsubRE */ register char *oldssp; /* previous ssp */ register char *dp; AT("diss", start, stop, startst, stopst); sp = start; for (ss = startst; ss < stopst; ss = es) { /* identify end of subRE */ es = ss; switch (OP(m->g->strip[es])) { case OPLUS_: case OQUEST_: es += OPND(m->g->strip[es]); break; case OCH_: while (OP(m->g->strip[es]) != O_CH) es += OPND(m->g->strip[es]); break; } es++; /* figure out what it matched */ switch (OP(m->g->strip[ss])) { case OEND: assert(nope); break; case OCHAR: sp++; break; case OBOL: case OEOL: case OBOW: case OEOW: break; case OANY: case OANYOF: sp++; break; case OBACK_: case O_BACK: assert(nope); break; /* cases where length of match is hard to find */ case OQUEST_: stp = stop; for (;;) { /* how long could this one be? */ rest = slow(m, sp, stp, ss, es); assert(rest != NULL); /* it did match */ /* could the rest match the rest? */ tail = slow(m, rest, stop, es, stopst); if (tail == stop) break; /* yes! */ /* no -- try a shorter match for this one */ stp = rest - 1; assert(stp >= sp); /* it did work */ } ssub = ss + 1; esub = es - 1; /* did innards match? */ if (slow(m, sp, rest, ssub, esub) != NULL) { dp = dissect(m, sp, rest, ssub, esub); assert(dp == rest); } else /* no */ assert(sp == rest); sp = rest; break; case OPLUS_: stp = stop; for (;;) { /* how long could this one be? */ rest = slow(m, sp, stp, ss, es); assert(rest != NULL); /* it did match */ /* could the rest match the rest? */ tail = slow(m, rest, stop, es, stopst); if (tail == stop) break; /* yes! */ /* no -- try a shorter match for this one */ stp = rest - 1; assert(stp >= sp); /* it did work */ } ssub = ss + 1; esub = es - 1; ssp = sp; oldssp = ssp; for (;;) { /* find last match of innards */ sep = slow(m, ssp, rest, ssub, esub); if (sep == NULL || sep == ssp) break; /* failed or matched null */ oldssp = ssp; /* on to next try */ ssp = sep; } if (sep == NULL) { /* last successful match */ sep = ssp; ssp = oldssp; } assert(sep == rest); /* must exhaust substring */ assert(slow(m, ssp, sep, ssub, esub) == rest); dp = dissect(m, ssp, sep, ssub, esub); assert(dp == sep); sp = rest; break; case OCH_: stp = stop; for (;;) { /* how long could this one be? */ rest = slow(m, sp, stp, ss, es); assert(rest != NULL); /* it did match */ /* could the rest match the rest? */ tail = slow(m, rest, stop, es, stopst); if (tail == stop) break; /* yes! */ /* no -- try a shorter match for this one */ stp = rest - 1; assert(stp >= sp); /* it did work */ } ssub = ss + 1; esub = ss + OPND(m->g->strip[ss]) - 1; assert(OP(m->g->strip[esub]) == OOR1); for (;;) { /* find first matching branch */ if (slow(m, sp, rest, ssub, esub) == rest) break; /* it matched all of it */ /* that one missed, try next one */ assert(OP(m->g->strip[esub]) == OOR1); esub++; assert(OP(m->g->strip[esub]) == OOR2); ssub = esub + 1; esub += OPND(m->g->strip[esub]); if (OP(m->g->strip[esub]) == OOR2) esub--; else assert(OP(m->g->strip[esub]) == O_CH); } dp = dissect(m, sp, rest, ssub, esub); assert(dp == rest); sp = rest; break; case O_PLUS: case O_QUEST: case OOR1: case OOR2: case O_CH: assert(nope); break; case OLPAREN: i = OPND(m->g->strip[ss]); assert(0 < i && i <= m->g->nsub); m->pmatch[i].rm_so = sp - m->offp; break; case ORPAREN: i = OPND(m->g->strip[ss]); assert(0 < i && i <= m->g->nsub); m->pmatch[i].rm_eo = sp - m->offp; break; default: /* uh oh */ assert(nope); break; } } assert(sp == stop); return(sp); } /* - backref - figure out what matched what, figuring in back references == static char *backref(register struct match *m, char *start, \ == char *stop, sopno startst, sopno stopst, sopno lev); */ static char * /* == stop (success) or NULL (failure) */ backref(m, start, stop, startst, stopst, lev) register struct match *m; char *start; char *stop; sopno startst; sopno stopst; sopno lev; /* PLUS nesting level */ { register int i; register sopno ss; /* start sop of current subRE */ register char *sp; /* start of string matched by it */ register sopno ssub; /* start sop of subsubRE */ register sopno esub; /* end sop of subsubRE */ register char *ssp; /* start of string matched by subsubRE */ register char *dp; register size_t len; register int hard; register sop s; register regoff_t offsave; register cset *cs; AT("back", start, stop, startst, stopst); sp = start; /* get as far as we can with easy stuff */ hard = 0; for (ss = startst; !hard && ss < stopst; ss++) switch (OP(s = m->g->strip[ss])) { case OCHAR: if (sp == stop || *sp++ != (char)OPND(s)) return(NULL); break; case OANY: if (sp == stop) return(NULL); sp++; break; case OANYOF: cs = &m->g->sets[OPND(s)]; if (sp == stop || !CHIN(cs, *sp++)) return(NULL); break; case OBOL: if ( (sp == m->beginp && !(m->eflags®_NOTBOL)) || (sp < m->endp && *(sp-1) == '\n' && (m->g->cflags®_NEWLINE)) ) { /* yes */ } else return(NULL); break; case OEOL: if ( (sp == m->endp && !(m->eflags®_NOTEOL)) || (sp < m->endp && *sp == '\n' && (m->g->cflags®_NEWLINE)) ) { /* yes */ } else return(NULL); break; case OBOW: if (( (sp == m->beginp && !(m->eflags®_NOTBOL)) || (sp < m->endp && *(sp-1) == '\n' && (m->g->cflags®_NEWLINE)) || (sp > m->beginp && !ISWORD(*(sp-1))) ) && (sp < m->endp && ISWORD(*sp)) ) { /* yes */ } else return(NULL); break; case OEOW: if (( (sp == m->endp && !(m->eflags®_NOTEOL)) || (sp < m->endp && *sp == '\n' && (m->g->cflags®_NEWLINE)) || (sp < m->endp && !ISWORD(*sp)) ) && (sp > m->beginp && ISWORD(*(sp-1))) ) { /* yes */ } else return(NULL); break; case O_QUEST: break; case OOR1: /* matches null but needs to skip */ ss++; s = m->g->strip[ss]; do { assert(OP(s) == OOR2); ss += OPND(s); } while (OP(s = m->g->strip[ss]) != O_CH); /* note that the ss++ gets us past the O_CH */ break; default: /* have to make a choice */ hard = 1; break; } if (!hard) { /* that was it! */ if (sp != stop) return(NULL); return(sp); } ss--; /* adjust for the for's final increment */ /* the hard stuff */ AT("hard", sp, stop, ss, stopst); s = m->g->strip[ss]; switch (OP(s)) { case OBACK_: /* the vilest depths */ i = OPND(s); assert(0 < i && i <= m->g->nsub); if (m->pmatch[i].rm_eo == -1) return(NULL); assert(m->pmatch[i].rm_so != -1); len = m->pmatch[i].rm_eo - m->pmatch[i].rm_so; assert(stop - m->beginp >= len); if (sp > stop - len) return(NULL); /* not enough left to match */ ssp = m->offp + m->pmatch[i].rm_so; if (memcmp(sp, ssp, len) != 0) return(NULL); while (m->g->strip[ss] != SOP(O_BACK, i)) ss++; return(backref(m, sp+len, stop, ss+1, stopst, lev)); break; case OQUEST_: /* to null or not */ dp = backref(m, sp, stop, ss+1, stopst, lev); if (dp != NULL) return(dp); /* not */ return(backref(m, sp, stop, ss+OPND(s)+1, stopst, lev)); break; case OPLUS_: assert(m->lastpos != NULL); assert(lev+1 <= m->g->nplus); m->lastpos[lev+1] = sp; return(backref(m, sp, stop, ss+1, stopst, lev+1)); break; case O_PLUS: if (sp == m->lastpos[lev]) /* last pass matched null */ return(backref(m, sp, stop, ss+1, stopst, lev-1)); /* try another pass */ m->lastpos[lev] = sp; dp = backref(m, sp, stop, ss-OPND(s)+1, stopst, lev); if (dp == NULL) return(backref(m, sp, stop, ss+1, stopst, lev-1)); else return(dp); break; case OCH_: /* find the right one, if any */ ssub = ss + 1; esub = ss + OPND(s) - 1; assert(OP(m->g->strip[esub]) == OOR1); for (;;) { /* find first matching branch */ dp = backref(m, sp, stop, ssub, esub, lev); if (dp != NULL) return(dp); /* that one missed, try next one */ if (OP(m->g->strip[esub]) == O_CH) return(NULL); /* there is none */ esub++; assert(OP(m->g->strip[esub]) == OOR2); ssub = esub + 1; esub += OPND(m->g->strip[esub]); if (OP(m->g->strip[esub]) == OOR2) esub--; else assert(OP(m->g->strip[esub]) == O_CH); } break; case OLPAREN: /* must undo assignment if rest fails */ i = OPND(s); assert(0 < i && i <= m->g->nsub); offsave = m->pmatch[i].rm_so; m->pmatch[i].rm_so = sp - m->offp; dp = backref(m, sp, stop, ss+1, stopst, lev); if (dp != NULL) return(dp); m->pmatch[i].rm_so = offsave; return(NULL); break; case ORPAREN: /* must undo assignment if rest fails */ i = OPND(s); assert(0 < i && i <= m->g->nsub); offsave = m->pmatch[i].rm_eo; m->pmatch[i].rm_eo = sp - m->offp; dp = backref(m, sp, stop, ss+1, stopst, lev); if (dp != NULL) return(dp); m->pmatch[i].rm_eo = offsave; return(NULL); break; default: /* uh oh */ assert(nope); break; } /* "can't happen" */ assert(nope); /* NOTREACHED */ } /* - fast - step through the string at top speed == static char *fast(register struct match *m, char *start, \ == char *stop, sopno startst, sopno stopst); */ static char * /* where tentative match ended, or NULL */ fast(m, start, stop, startst, stopst) register struct match *m; char *start; char *stop; sopno startst; sopno stopst; { register states st = m->st; register states fresh = m->fresh; register states tmp = m->tmp; register char *p = start; register int c = (start == m->beginp) ? OUT : *(start-1); register int lastc; /* previous c */ register int flagch; register int i; register char *coldp; /* last p after which no match was underway */ CLEAR(st); SET1(st, startst); st = step(m->g, startst, stopst, st, NOTHING, st); ASSIGN(fresh, st); SP("start", st, *p); coldp = NULL; for (;;) { /* next character */ lastc = c; c = (p == m->endp) ? OUT : *p; if (EQ(st, fresh)) coldp = p; /* is there an EOL and/or BOL between lastc and c? */ flagch = '\0'; i = 0; if ( (lastc == '\n' && m->g->cflags®_NEWLINE) || (lastc == OUT && !(m->eflags®_NOTBOL)) ) { flagch = BOL; i = m->g->nbol; } if ( (c == '\n' && m->g->cflags®_NEWLINE) || (c == OUT && !(m->eflags®_NOTEOL)) ) { flagch = (flagch == BOL) ? BOLEOL : EOL; i += m->g->neol; } if (i != 0) { for (; i > 0; i--) st = step(m->g, startst, stopst, st, flagch, st); SP("boleol", st, c); } /* how about a word boundary? */ if ( (flagch == BOL || (lastc != OUT && !ISWORD(lastc))) && (c != OUT && ISWORD(c)) ) { flagch = BOW; } if ( (lastc != OUT && ISWORD(lastc)) && (flagch == EOL || (c != OUT && !ISWORD(c))) ) { flagch = EOW; } if (flagch == BOW || flagch == EOW) { st = step(m->g, startst, stopst, st, flagch, st); SP("boweow", st, c); } /* are we done? */ if (ISSET(st, stopst) || p == stop) break; /* NOTE BREAK OUT */ /* no, we must deal with this character */ ASSIGN(tmp, st); ASSIGN(st, fresh); assert(c != OUT); st = step(m->g, startst, stopst, tmp, c, st); SP("aft", st, c); assert(EQ(step(m->g, startst, stopst, st, NOTHING, st), st)); p++; } assert(coldp != NULL); m->coldp = coldp; if (ISSET(st, stopst)) return(p+1); else return(NULL); } /* - slow - step through the string more deliberately == static char *slow(register struct match *m, char *start, \ == char *stop, sopno startst, sopno stopst); */ static char * /* where it ended */ slow(m, start, stop, startst, stopst) register struct match *m; char *start; char *stop; sopno startst; sopno stopst; { register states st = m->st; register states empty = m->empty; register states tmp = m->tmp; register char *p = start; register int c = (start == m->beginp) ? OUT : *(start-1); register int lastc; /* previous c */ register int flagch; register int i; register char *matchp; /* last p at which a match ended */ AT("slow", start, stop, startst, stopst); CLEAR(st); SET1(st, startst); SP("sstart", st, *p); st = step(m->g, startst, stopst, st, NOTHING, st); matchp = NULL; for (;;) { /* next character */ lastc = c; c = (p == m->endp) ? OUT : *p; /* is there an EOL and/or BOL between lastc and c? */ flagch = '\0'; i = 0; if ( (lastc == '\n' && m->g->cflags®_NEWLINE) || (lastc == OUT && !(m->eflags®_NOTBOL)) ) { flagch = BOL; i = m->g->nbol; } if ( (c == '\n' && m->g->cflags®_NEWLINE) || (c == OUT && !(m->eflags®_NOTEOL)) ) { flagch = (flagch == BOL) ? BOLEOL : EOL; i += m->g->neol; } if (i != 0) { for (; i > 0; i--) st = step(m->g, startst, stopst, st, flagch, st); SP("sboleol", st, c); } /* how about a word boundary? */ if ( (flagch == BOL || (lastc != OUT && !ISWORD(lastc))) && (c != OUT && ISWORD(c)) ) { flagch = BOW; } if ( (lastc != OUT && ISWORD(lastc)) && (flagch == EOL || (c != OUT && !ISWORD(c))) ) { flagch = EOW; } if (flagch == BOW || flagch == EOW) { st = step(m->g, startst, stopst, st, flagch, st); SP("sboweow", st, c); } /* are we done? */ if (ISSET(st, stopst)) matchp = p; if (EQ(st, empty) || p == stop) break; /* NOTE BREAK OUT */ /* no, we must deal with this character */ ASSIGN(tmp, st); ASSIGN(st, empty); assert(c != OUT); st = step(m->g, startst, stopst, tmp, c, st); SP("saft", st, c); assert(EQ(step(m->g, startst, stopst, st, NOTHING, st), st)); p++; } return(matchp); } /* - step - map set of states reachable before char to set reachable after == static states step(register struct re_guts *g, sopno start, sopno stop, \ == register states bef, int ch, register states aft); == #define BOL (OUT+1) == #define EOL (BOL+1) == #define BOLEOL (BOL+2) == #define NOTHING (BOL+3) == #define BOW (BOL+4) == #define EOW (BOL+5) == #define CODEMAX (BOL+5) // highest code used == #define NONCHAR(c) ((c) > CHAR_MAX) == #define NNONCHAR (CODEMAX-CHAR_MAX) */ static states step(g, start, stop, bef, ch, aft) register struct re_guts *g; sopno start; /* start state within strip */ sopno stop; /* state after stop state within strip */ register states bef; /* states reachable before */ int ch; /* character or NONCHAR code */ register states aft; /* states already known reachable after */ { register cset *cs; register sop s; register sopno pc; register onestate here; /* note, macros know this name */ register sopno look; register int i; for (pc = start, INIT(here, pc); pc != stop; pc++, INC(here)) { s = g->strip[pc]; switch (OP(s)) { case OEND: assert(pc == stop-1); break; case OCHAR: /* only characters can match */ assert(!NONCHAR(ch) || ch != (char)OPND(s)); if (ch == (char)OPND(s)) FWD(aft, bef, 1); break; case OBOL: if (ch == BOL || ch == BOLEOL) FWD(aft, bef, 1); break; case OEOL: if (ch == EOL || ch == BOLEOL) FWD(aft, bef, 1); break; case OBOW: if (ch == BOW) FWD(aft, bef, 1); break; case OEOW: if (ch == EOW) FWD(aft, bef, 1); break; case OANY: if (!NONCHAR(ch)) FWD(aft, bef, 1); break; case OANYOF: cs = &g->sets[OPND(s)]; if (!NONCHAR(ch) && CHIN(cs, ch)) FWD(aft, bef, 1); break; case OBACK_: /* ignored here */ case O_BACK: FWD(aft, aft, 1); break; case OPLUS_: /* forward, this is just an empty */ FWD(aft, aft, 1); break; case O_PLUS: /* both forward and back */ FWD(aft, aft, 1); i = ISSETBACK(aft, OPND(s)); BACK(aft, aft, OPND(s)); if (!i && ISSETBACK(aft, OPND(s))) { /* oho, must reconsider loop body */ pc -= OPND(s) + 1; INIT(here, pc); } break; case OQUEST_: /* two branches, both forward */ FWD(aft, aft, 1); FWD(aft, aft, OPND(s)); break; case O_QUEST: /* just an empty */ FWD(aft, aft, 1); break; case OLPAREN: /* not significant here */ case ORPAREN: FWD(aft, aft, 1); break; case OCH_: /* mark the first two branches */ FWD(aft, aft, 1); assert(OP(g->strip[pc+OPND(s)]) == OOR2); FWD(aft, aft, OPND(s)); break; case OOR1: /* done a branch, find the O_CH */ if (ISSTATEIN(aft, here)) { for (look = 1; OP(s = g->strip[pc+look]) != O_CH; look += OPND(s)) assert(OP(s) == OOR2); FWD(aft, aft, look); } break; case OOR2: /* propagate OCH_'s marking */ FWD(aft, aft, 1); if (OP(g->strip[pc+OPND(s)]) != O_CH) { assert(OP(g->strip[pc+OPND(s)]) == OOR2); FWD(aft, aft, OPND(s)); } break; case O_CH: /* just empty */ FWD(aft, aft, 1); break; default: /* ooooops... */ assert(nope); break; } } return(aft); } #ifdef REDEBUG /* - print - print a set of states == #ifdef REDEBUG == static void print(struct match *m, char *caption, states st, \ == int ch, FILE *d); == #endif */ static void print(m, caption, st, ch, d) struct match *m; char *caption; states st; int ch; FILE *d; { register struct re_guts *g = m->g; register int i; register int first = 1; if (!(m->eflags®_TRACE)) return; fprintf(d, "%s", caption); if (ch != '\0') fprintf(d, " %s", pchar(ch)); for (i = 0; i < g->nstates; i++) if (ISSET(st, i)) { fprintf(d, "%s%d", (first) ? "\t" : ", ", i); first = 0; } fprintf(d, "\n"); } /* - at - print current situation == #ifdef REDEBUG == static void at(struct match *m, char *title, char *start, char *stop, \ == sopno startst, sopno stopst); == #endif */ static void at(m, title, start, stop, startst, stopst) struct match *m; char *title; char *start; char *stop; sopno startst; sopno stopst; { if (!(m->eflags®_TRACE)) return; printf("%s %s-", title, pchar(*start)); printf("%s ", pchar(*stop)); printf("%ld-%ld\n", (long)startst, (long)stopst); } #ifndef PCHARDONE #define PCHARDONE /* never again */ /* - pchar - make a character printable == #ifdef REDEBUG == static char *pchar(int ch); == #endif * * Is this identical to regchar() over in debug.c? Well, yes. But a * duplicate here avoids having a debugging-capable regexec.o tied to * a matching debug.o, and this is convenient. It all disappears in * the non-debug compilation anyway, so it doesn't matter much. */ static char * /* -> representation */ pchar(ch) int ch; { static char pbuf[10]; if (isprint(ch) || ch == ' ') sprintf(pbuf, "%c", ch); else sprintf(pbuf, "\\%o", ch); return(pbuf); } #endif #endif #undef matcher #undef fast #undef slow #undef dissect #undef backref #undef step #undef print #undef at #undef match vigor-0.016.orig/regex/re_format.70100644000076400007640000002676707103707264015476 0ustar cjw44cjw44.\" Copyright (c) 1992, 1993, 1994 Henry Spencer. .\" Copyright (c) 1992, 1993, 1994 .\" The Regents of the University of California. All rights reserved. .\" .\" This code is derived from software contributed to Berkeley by .\" Henry Spencer of the University of Toronto. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)re_format.7 8.2 (Berkeley) 3/16/94 .\" .TH RE_FORMAT 7 "March 16, 1994" .SH NAME re_format \- POSIX 1003.2 regular expressions .SH DESCRIPTION Regular expressions (``RE''s), as defined in POSIX 1003.2, come in two forms: modern REs (roughly those of .IR egrep ; 1003.2 calls these ``extended'' REs) and obsolete REs (roughly those of .IR ed ; 1003.2 ``basic'' REs). Obsolete REs mostly exist for backward compatibility in some old programs; they will be discussed at the end. 1003.2 leaves some aspects of RE syntax and semantics open; `\(dg' marks decisions on these aspects that may not be fully portable to other 1003.2 implementations. .PP A (modern) RE is one\(dg or more non-empty\(dg \fIbranches\fR, separated by `|'. It matches anything that matches one of the branches. .PP A branch is one\(dg or more \fIpieces\fR, concatenated. It matches a match for the first, followed by a match for the second, etc. .PP A piece is an \fIatom\fR possibly followed by a single\(dg `*', `+', `?', or \fIbound\fR. An atom followed by `*' matches a sequence of 0 or more matches of the atom. An atom followed by `+' matches a sequence of 1 or more matches of the atom. An atom followed by `?' matches a sequence of 0 or 1 matches of the atom. .PP A \fIbound\fR is `{' followed by an unsigned decimal integer, possibly followed by `,' possibly followed by another unsigned decimal integer, always followed by `}'. The integers must lie between 0 and RE_DUP_MAX (255\(dg) inclusive, and if there are two of them, the first may not exceed the second. An atom followed by a bound containing one integer \fIi\fR and no comma matches a sequence of exactly \fIi\fR matches of the atom. An atom followed by a bound containing one integer \fIi\fR and a comma matches a sequence of \fIi\fR or more matches of the atom. An atom followed by a bound containing two integers \fIi\fR and \fIj\fR matches a sequence of \fIi\fR through \fIj\fR (inclusive) matches of the atom. .PP An atom is a regular expression enclosed in `()' (matching a match for the regular expression), an empty set of `()' (matching the null string)\(dg, a \fIbracket expression\fR (see below), `.' (matching any single character), `^' (matching the null string at the beginning of a line), `$' (matching the null string at the end of a line), a `\e' followed by one of the characters `^.[$()|*+?{\e' (matching that character taken as an ordinary character), a `\e' followed by any other character\(dg (matching that character taken as an ordinary character, as if the `\e' had not been present\(dg), or a single character with no other significance (matching that character). A `{' followed by a character other than a digit is an ordinary character, not the beginning of a bound\(dg. It is illegal to end an RE with `\e'. .PP A \fIbracket expression\fR is a list of characters enclosed in `[]'. It normally matches any single character from the list (but see below). If the list begins with `^', it matches any single character (but see below) \fInot\fR from the rest of the list. If two characters in the list are separated by `\-', this is shorthand for the full \fIrange\fR of characters between those two (inclusive) in the collating sequence, e.g. `[0-9]' in ASCII matches any decimal digit. It is illegal\(dg for two ranges to share an endpoint, e.g. `a-c-e'. Ranges are very collating-sequence-dependent, and portable programs should avoid relying on them. .PP To include a literal `]' in the list, make it the first character (following a possible `^'). To include a literal `\-', make it the first or last character, or the second endpoint of a range. To use a literal `\-' as the first endpoint of a range, enclose it in `[.' and `.]' to make it a collating element (see below). With the exception of these and some combinations using `[' (see next paragraphs), all other special characters, including `\e', lose their special significance within a bracket expression. .PP Within a bracket expression, a collating element (a character, a multi-character sequence that collates as if it were a single character, or a collating-sequence name for either) enclosed in `[.' and `.]' stands for the sequence of characters of that collating element. The sequence is a single element of the bracket expression's list. A bracket expression containing a multi-character collating element can thus match more than one character, e.g. if the collating sequence includes a `ch' collating element, then the RE `[[.ch.]]*c' matches the first five characters of `chchcc'. .PP Within a bracket expression, a collating element enclosed in `[=' and `=]' is an equivalence class, standing for the sequences of characters of all collating elements equivalent to that one, including itself. (If there are no other equivalent collating elements, the treatment is as if the enclosing delimiters were `[.' and `.]'.) For example, if o and \o'o^' are the members of an equivalence class, then `[[=o=]]', `[[=\o'o^'=]]', and `[o\o'o^']' are all synonymous. An equivalence class may not\(dg be an endpoint of a range. .PP Within a bracket expression, the name of a \fIcharacter class\fR enclosed in `[:' and `:]' stands for the list of all characters belonging to that class. Standard character class names are: .PP .RS .nf .ta 3c 6c 9c alnum digit punct alpha graph space blank lower upper cntrl print xdigit .fi .RE .PP These stand for the character classes defined in .IR ctype (3). A locale may provide others. A character class may not be used as an endpoint of a range. .PP There are two special cases\(dg of bracket expressions: the bracket expressions `[[:<:]]' and `[[:>:]]' match the null string at the beginning and end of a word respectively. A word is defined as a sequence of word characters which is neither preceded nor followed by word characters. A word character is an .I alnum character (as defined by .IR ctype (3)) or an underscore. This is an extension, compatible with but not specified by POSIX 1003.2, and should be used with caution in software intended to be portable to other systems. .PP In the event that an RE could match more than one substring of a given string, the RE matches the one starting earliest in the string. If the RE could match more than one substring starting at that point, it matches the longest. Subexpressions also match the longest possible substrings, subject to the constraint that the whole match be as long as possible, with subexpressions starting earlier in the RE taking priority over ones starting later. Note that higher-level subexpressions thus take priority over their lower-level component subexpressions. .PP Match lengths are measured in characters, not collating elements. A null string is considered longer than no match at all. For example, `bb*' matches the three middle characters of `abbbc', `(wee|week)(knights|nights)' matches all ten characters of `weeknights', when `(.*).*' is matched against `abc' the parenthesized subexpression matches all three characters, and when `(a*)*' is matched against `bc' both the whole RE and the parenthesized subexpression match the null string. .PP If case-independent matching is specified, the effect is much as if all case distinctions had vanished from the alphabet. When an alphabetic that exists in multiple cases appears as an ordinary character outside a bracket expression, it is effectively transformed into a bracket expression containing both cases, e.g. `x' becomes `[xX]'. When it appears inside a bracket expression, all case counterparts of it are added to the bracket expression, so that (e.g.) `[x]' becomes `[xX]' and `[^x]' becomes `[^xX]'. .PP No particular limit is imposed on the length of REs\(dg. Programs intended to be portable should not employ REs longer than 256 bytes, as an implementation can refuse to accept such REs and remain POSIX-compliant. .PP Obsolete (``basic'') regular expressions differ in several respects. `|', `+', and `?' are ordinary characters and there is no equivalent for their functionality. The delimiters for bounds are `\e{' and `\e}', with `{' and `}' by themselves ordinary characters. The parentheses for nested subexpressions are `\e(' and `\e)', with `(' and `)' by themselves ordinary characters. `^' is an ordinary character except at the beginning of the RE or\(dg the beginning of a parenthesized subexpression, `$' is an ordinary character except at the end of the RE or\(dg the end of a parenthesized subexpression, and `*' is an ordinary character if it appears at the beginning of the RE or the beginning of a parenthesized subexpression (after a possible leading `^'). Finally, there is one new type of atom, a \fIback reference\fR: `\e' followed by a non-zero decimal digit \fId\fR matches the same sequence of characters matched by the \fId\fRth parenthesized subexpression (numbering subexpressions by the positions of their opening parentheses, left to right), so that (e.g.) `\e([bc]\e)\e1' matches `bb' or `cc' but not `bc'. .SH SEE ALSO regex(3) .PP POSIX 1003.2, section 2.8 (Regular Expression Notation). .SH BUGS Having two kinds of REs is a botch. .PP The current 1003.2 spec says that `)' is an ordinary character in the absence of an unmatched `('; this was an unintentional result of a wording error, and change is likely. Avoid relying on it. .PP Back references are a dreadful botch, posing major problems for efficient implementations. They are also somewhat vaguely defined (does `a\e(\e(b\e)*\e2\e)*d' match `abbbd'?). Avoid using them. .PP 1003.2's specification of case-independent matching is vague. The ``one case implies all cases'' definition given above is current consensus among implementors as to the right interpretation. .PP The syntax for word boundaries is incredibly ugly. vigor-0.016.orig/regex/regcomp.c0100644000076400007640000012162707103707264015217 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)regcomp.c 8.4 (Berkeley) 3/19/94 */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)regcomp.c 8.4 (Berkeley) 3/19/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include #include "utils.h" #include "regex2.h" #include "cclass.h" #include "cname.h" /* * parse structure, passed up and down to avoid global variables and * other clumsinesses */ struct parse { char *next; /* next character in RE */ char *end; /* end of string (-> NUL normally) */ int error; /* has an error been seen? */ sop *strip; /* malloced strip */ sopno ssize; /* malloced strip size (allocated) */ sopno slen; /* malloced strip length (used) */ int ncsalloc; /* number of csets allocated */ struct re_guts *g; # define NPAREN 10 /* we need to remember () 1-9 for back refs */ sopno pbegin[NPAREN]; /* -> ( ([0] unused) */ sopno pend[NPAREN]; /* -> ) ([0] unused) */ }; /* ========= begin header generated by ./mkh ========= */ #ifdef __cplusplus extern "C" { #endif /* === regcomp.c === */ static void p_ere __P((struct parse *p, int stop)); static void p_ere_exp __P((struct parse *p)); static void p_str __P((struct parse *p)); static void p_bre __P((struct parse *p, int end1, int end2)); static int p_simp_re __P((struct parse *p, int starordinary)); static int p_count __P((struct parse *p)); static void p_bracket __P((struct parse *p)); static void p_b_term __P((struct parse *p, cset *cs)); static void p_b_cclass __P((struct parse *p, cset *cs)); static void p_b_eclass __P((struct parse *p, cset *cs)); static char p_b_symbol __P((struct parse *p)); static char p_b_coll_elem __P((struct parse *p, int endc)); static char othercase __P((int ch)); static void bothcases __P((struct parse *p, int ch)); static void ordinary __P((struct parse *p, int ch)); static void nonnewline __P((struct parse *p)); static void repeat __P((struct parse *p, sopno start, int from, int to)); static int seterr __P((struct parse *p, int e)); static cset *allocset __P((struct parse *p)); static void freeset __P((struct parse *p, cset *cs)); static int freezeset __P((struct parse *p, cset *cs)); static int firstch __P((struct parse *p, cset *cs)); static int nch __P((struct parse *p, cset *cs)); static void mcadd __P((struct parse *p, cset *cs, char *cp)); static void mcsub __P((cset *cs, char *cp)); static int mcin __P((cset *cs, char *cp)); static char *mcfind __P((cset *cs, char *cp)); static void mcinvert __P((struct parse *p, cset *cs)); static void mccase __P((struct parse *p, cset *cs)); static int isinsets __P((struct re_guts *g, int c)); static int samesets __P((struct re_guts *g, int c1, int c2)); static void categorize __P((struct parse *p, struct re_guts *g)); static sopno dupl __P((struct parse *p, sopno start, sopno finish)); static void doemit __P((struct parse *p, sop op, size_t opnd)); static void doinsert __P((struct parse *p, sop op, size_t opnd, sopno pos)); static void dofwd __P((struct parse *p, sopno pos, sop value)); static void enlarge __P((struct parse *p, sopno size)); static void stripsnug __P((struct parse *p, struct re_guts *g)); static void findmust __P((struct parse *p, struct re_guts *g)); static sopno pluscount __P((struct parse *p, struct re_guts *g)); #ifdef __cplusplus } #endif /* ========= end header generated by ./mkh ========= */ static char nuls[10]; /* place to point scanner in event of error */ /* * macros for use with parse structure * BEWARE: these know that the parse structure is named `p' !!! */ #define PEEK() (*p->next) #define PEEK2() (*(p->next+1)) #define MORE() (p->next < p->end) #define MORE2() (p->next+1 < p->end) #define SEE(c) (MORE() && PEEK() == (c)) #define SEETWO(a, b) (MORE() && MORE2() && PEEK() == (a) && PEEK2() == (b)) #define EAT(c) ((SEE(c)) ? (NEXT(), 1) : 0) #define EATTWO(a, b) ((SEETWO(a, b)) ? (NEXT2(), 1) : 0) #define NEXT() (p->next++) #define NEXT2() (p->next += 2) #define NEXTn(n) (p->next += (n)) #define GETNEXT() (*p->next++) #define SETERROR(e) seterr(p, (e)) #define REQUIRE(co, e) ((co) || SETERROR(e)) #define MUSTSEE(c, e) (REQUIRE(MORE() && PEEK() == (c), e)) #define MUSTEAT(c, e) (REQUIRE(MORE() && GETNEXT() == (c), e)) #define MUSTNOTSEE(c, e) (REQUIRE(!MORE() || PEEK() != (c), e)) #define EMIT(op, sopnd) doemit(p, (sop)(op), (size_t)(sopnd)) #define INSERT(op, pos) doinsert(p, (sop)(op), HERE()-(pos)+1, pos) #define AHEAD(pos) dofwd(p, pos, HERE()-(pos)) #define ASTERN(sop, pos) EMIT(sop, HERE()-pos) #define HERE() (p->slen) #define THERE() (p->slen - 1) #define THERETHERE() (p->slen - 2) #define DROP(n) (p->slen -= (n)) #ifndef NDEBUG static int never = 0; /* for use in asserts; shuts lint up */ #else #define never 0 /* some s have bugs too */ #endif /* - regcomp - interface for parser and compilation = extern int regcomp(regex_t *, const char *, int); = #define REG_BASIC 0000 = #define REG_EXTENDED 0001 = #define REG_ICASE 0002 = #define REG_NOSUB 0004 = #define REG_NEWLINE 0010 = #define REG_NOSPEC 0020 = #define REG_PEND 0040 = #define REG_DUMP 0200 */ int /* 0 success, otherwise REG_something */ regcomp(preg, pattern, cflags) regex_t *preg; const char *pattern; int cflags; { struct parse pa; register struct re_guts *g; register struct parse *p = &pa; register int i; register size_t len; #ifdef REDEBUG # define GOODFLAGS(f) (f) #else # define GOODFLAGS(f) ((f)&~REG_DUMP) #endif cflags = GOODFLAGS(cflags); if ((cflags®_EXTENDED) && (cflags®_NOSPEC)) return(REG_INVARG); if (cflags®_PEND) { if (preg->re_endp < pattern) return(REG_INVARG); len = preg->re_endp - pattern; } else len = strlen((char *)pattern); /* do the mallocs early so failure handling is easy */ g = (struct re_guts *)malloc(sizeof(struct re_guts) + (NC-1)*sizeof(cat_t)); if (g == NULL) return(REG_ESPACE); p->ssize = len/(size_t)2*(size_t)3 + (size_t)1; /* ugh */ p->strip = (sop *)malloc(p->ssize * sizeof(sop)); p->slen = 0; if (p->strip == NULL) { free((char *)g); return(REG_ESPACE); } /* set things up */ p->g = g; p->next = (char *)pattern; /* convenience; we do not modify it */ p->end = p->next + len; p->error = 0; p->ncsalloc = 0; for (i = 0; i < NPAREN; i++) { p->pbegin[i] = 0; p->pend[i] = 0; } g->csetsize = NC; g->sets = NULL; g->setbits = NULL; g->ncsets = 0; g->cflags = cflags; g->iflags = 0; g->nbol = 0; g->neol = 0; g->must = NULL; g->mlen = 0; g->nsub = 0; g->ncategories = 1; /* category 0 is "everything else" */ g->categories = &g->catspace[-(CHAR_MIN)]; (void) memset((char *)g->catspace, 0, NC*sizeof(cat_t)); g->backrefs = 0; /* do it */ EMIT(OEND, 0); g->firststate = THERE(); if (cflags®_EXTENDED) p_ere(p, OUT); else if (cflags®_NOSPEC) p_str(p); else p_bre(p, OUT, OUT); EMIT(OEND, 0); g->laststate = THERE(); /* tidy up loose ends and fill things in */ categorize(p, g); stripsnug(p, g); findmust(p, g); g->nplus = pluscount(p, g); g->magic = MAGIC2; preg->re_nsub = g->nsub; preg->re_g = g; preg->re_magic = MAGIC1; #ifndef REDEBUG /* not debugging, so can't rely on the assert() in regexec() */ if (g->iflags&BAD) SETERROR(REG_ASSERT); #endif /* win or lose, we're done */ if (p->error != 0) /* lose */ regfree(preg); return(p->error); } /* - p_ere - ERE parser top level, concatenation and alternation == static void p_ere(register struct parse *p, int stop); */ static void p_ere(p, stop) register struct parse *p; int stop; /* character this ERE should end at */ { register char c; register sopno prevback; register sopno prevfwd; register sopno conc; register int first = 1; /* is this the first alternative? */ for (;;) { /* do a bunch of concatenated expressions */ conc = HERE(); while (MORE() && (c = PEEK()) != '|' && c != stop) p_ere_exp(p); REQUIRE(HERE() != conc, REG_EMPTY); /* require nonempty */ if (!EAT('|')) break; /* NOTE BREAK OUT */ if (first) { INSERT(OCH_, conc); /* offset is wrong */ prevfwd = conc; prevback = conc; first = 0; } ASTERN(OOR1, prevback); prevback = THERE(); AHEAD(prevfwd); /* fix previous offset */ prevfwd = HERE(); EMIT(OOR2, 0); /* offset is very wrong */ } if (!first) { /* tail-end fixups */ AHEAD(prevfwd); ASTERN(O_CH, prevback); } assert(!MORE() || SEE(stop)); } /* - p_ere_exp - parse one subERE, an atom possibly followed by a repetition op == static void p_ere_exp(register struct parse *p); */ static void p_ere_exp(p) register struct parse *p; { register char c; register sopno pos; register int count; register int count2; register sopno subno; int wascaret = 0; assert(MORE()); /* caller should have ensured this */ c = GETNEXT(); pos = HERE(); switch (c) { case '(': REQUIRE(MORE(), REG_EPAREN); p->g->nsub++; subno = p->g->nsub; if (subno < NPAREN) p->pbegin[subno] = HERE(); EMIT(OLPAREN, subno); if (!SEE(')')) p_ere(p, ')'); if (subno < NPAREN) { p->pend[subno] = HERE(); assert(p->pend[subno] != 0); } EMIT(ORPAREN, subno); MUSTEAT(')', REG_EPAREN); break; #ifndef POSIX_MISTAKE case ')': /* happens only if no current unmatched ( */ /* * You may ask, why the ifndef? Because I didn't notice * this until slightly too late for 1003.2, and none of the * other 1003.2 regular-expression reviewers noticed it at * all. So an unmatched ) is legal POSIX, at least until * we can get it fixed. */ SETERROR(REG_EPAREN); break; #endif case '^': EMIT(OBOL, 0); p->g->iflags |= USEBOL; p->g->nbol++; wascaret = 1; break; case '$': EMIT(OEOL, 0); p->g->iflags |= USEEOL; p->g->neol++; break; case '|': SETERROR(REG_EMPTY); break; case '*': case '+': case '?': SETERROR(REG_BADRPT); break; case '.': if (p->g->cflags®_NEWLINE) nonnewline(p); else EMIT(OANY, 0); break; case '[': p_bracket(p); break; case '\\': REQUIRE(MORE(), REG_EESCAPE); c = GETNEXT(); ordinary(p, c); break; case '{': /* okay as ordinary except if digit follows */ REQUIRE(!MORE() || !isdigit(PEEK()), REG_BADRPT); /* FALLTHROUGH */ default: ordinary(p, c); break; } if (!MORE()) return; c = PEEK(); /* we call { a repetition if followed by a digit */ if (!( c == '*' || c == '+' || c == '?' || (c == '{' && MORE2() && isdigit(PEEK2())) )) return; /* no repetition, we're done */ NEXT(); REQUIRE(!wascaret, REG_BADRPT); switch (c) { case '*': /* implemented as +? */ /* this case does not require the (y|) trick, noKLUDGE */ INSERT(OPLUS_, pos); ASTERN(O_PLUS, pos); INSERT(OQUEST_, pos); ASTERN(O_QUEST, pos); break; case '+': INSERT(OPLUS_, pos); ASTERN(O_PLUS, pos); break; case '?': /* KLUDGE: emit y? as (y|) until subtle bug gets fixed */ INSERT(OCH_, pos); /* offset slightly wrong */ ASTERN(OOR1, pos); /* this one's right */ AHEAD(pos); /* fix the OCH_ */ EMIT(OOR2, 0); /* offset very wrong... */ AHEAD(THERE()); /* ...so fix it */ ASTERN(O_CH, THERETHERE()); break; case '{': count = p_count(p); if (EAT(',')) { if (isdigit(PEEK())) { count2 = p_count(p); REQUIRE(count <= count2, REG_BADBR); } else /* single number with comma */ count2 = INFINITY; } else /* just a single number */ count2 = count; repeat(p, pos, count, count2); if (!EAT('}')) { /* error heuristics */ while (MORE() && PEEK() != '}') NEXT(); REQUIRE(MORE(), REG_EBRACE); SETERROR(REG_BADBR); } break; } if (!MORE()) return; c = PEEK(); if (!( c == '*' || c == '+' || c == '?' || (c == '{' && MORE2() && isdigit(PEEK2())) ) ) return; SETERROR(REG_BADRPT); } /* - p_str - string (no metacharacters) "parser" == static void p_str(register struct parse *p); */ static void p_str(p) register struct parse *p; { REQUIRE(MORE(), REG_EMPTY); while (MORE()) ordinary(p, GETNEXT()); } /* - p_bre - BRE parser top level, anchoring and concatenation == static void p_bre(register struct parse *p, register int end1, \ == register int end2); * Giving end1 as OUT essentially eliminates the end1/end2 check. * * This implementation is a bit of a kludge, in that a trailing $ is first * taken as an ordinary character and then revised to be an anchor. The * only undesirable side effect is that '$' gets included as a character * category in such cases. This is fairly harmless; not worth fixing. * The amount of lookahead needed to avoid this kludge is excessive. */ static void p_bre(p, end1, end2) register struct parse *p; register int end1; /* first terminating character */ register int end2; /* second terminating character */ { register sopno start = HERE(); register int first = 1; /* first subexpression? */ register int wasdollar = 0; if (EAT('^')) { EMIT(OBOL, 0); p->g->iflags |= USEBOL; p->g->nbol++; } while (MORE() && !SEETWO(end1, end2)) { wasdollar = p_simp_re(p, first); first = 0; } if (wasdollar) { /* oops, that was a trailing anchor */ DROP(1); EMIT(OEOL, 0); p->g->iflags |= USEEOL; p->g->neol++; } REQUIRE(HERE() != start, REG_EMPTY); /* require nonempty */ } /* - p_simp_re - parse a simple RE, an atom possibly followed by a repetition == static int p_simp_re(register struct parse *p, int starordinary); */ static int /* was the simple RE an unbackslashed $? */ p_simp_re(p, starordinary) register struct parse *p; int starordinary; /* is a leading * an ordinary character? */ { register int c; register int count; register int count2; register sopno pos; register int i; register sopno subno; # define BACKSL (1<g->cflags®_NEWLINE) nonnewline(p); else EMIT(OANY, 0); break; case '[': p_bracket(p); break; case BACKSL|'{': SETERROR(REG_BADRPT); break; case BACKSL|'(': p->g->nsub++; subno = p->g->nsub; if (subno < NPAREN) p->pbegin[subno] = HERE(); EMIT(OLPAREN, subno); /* the MORE here is an error heuristic */ if (MORE() && !SEETWO('\\', ')')) p_bre(p, '\\', ')'); if (subno < NPAREN) { p->pend[subno] = HERE(); assert(p->pend[subno] != 0); } EMIT(ORPAREN, subno); REQUIRE(EATTWO('\\', ')'), REG_EPAREN); break; case BACKSL|')': /* should not get here -- must be user */ case BACKSL|'}': SETERROR(REG_EPAREN); break; case BACKSL|'1': case BACKSL|'2': case BACKSL|'3': case BACKSL|'4': case BACKSL|'5': case BACKSL|'6': case BACKSL|'7': case BACKSL|'8': case BACKSL|'9': i = (c&~BACKSL) - '0'; assert(i < NPAREN); if (p->pend[i] != 0) { assert(i <= p->g->nsub); EMIT(OBACK_, i); assert(p->pbegin[i] != 0); assert(OP(p->strip[p->pbegin[i]]) == OLPAREN); assert(OP(p->strip[p->pend[i]]) == ORPAREN); (void) dupl(p, p->pbegin[i]+1, p->pend[i]); EMIT(O_BACK, i); } else SETERROR(REG_ESUBREG); p->g->backrefs = 1; break; case '*': REQUIRE(starordinary, REG_BADRPT); /* FALLTHROUGH */ default: ordinary(p, c &~ BACKSL); break; } if (EAT('*')) { /* implemented as +? */ /* this case does not require the (y|) trick, noKLUDGE */ INSERT(OPLUS_, pos); ASTERN(O_PLUS, pos); INSERT(OQUEST_, pos); ASTERN(O_QUEST, pos); } else if (EATTWO('\\', '{')) { count = p_count(p); if (EAT(',')) { if (MORE() && isdigit(PEEK())) { count2 = p_count(p); REQUIRE(count <= count2, REG_BADBR); } else /* single number with comma */ count2 = INFINITY; } else /* just a single number */ count2 = count; repeat(p, pos, count, count2); if (!EATTWO('\\', '}')) { /* error heuristics */ while (MORE() && !SEETWO('\\', '}')) NEXT(); REQUIRE(MORE(), REG_EBRACE); SETERROR(REG_BADBR); } } else if (c == (unsigned char)'$') /* $ (but not \$) ends it */ return(1); return(0); } /* - p_count - parse a repetition count == static int p_count(register struct parse *p); */ static int /* the value */ p_count(p) register struct parse *p; { register int count = 0; register int ndigits = 0; while (MORE() && isdigit(PEEK()) && count <= DUPMAX) { count = count*10 + (GETNEXT() - '0'); ndigits++; } REQUIRE(ndigits > 0 && count <= DUPMAX, REG_BADBR); return(count); } /* - p_bracket - parse a bracketed character list == static void p_bracket(register struct parse *p); * * Note a significant property of this code: if the allocset() did SETERROR, * no set operations are done. */ static void p_bracket(p) register struct parse *p; { register char c; register cset *cs = allocset(p); register int invert = 0; /* Dept of Truly Sickening Special-Case Kludges */ if (p->next + 5 < p->end && strncmp(p->next, "[:<:]]", 6) == 0) { EMIT(OBOW, 0); NEXTn(6); return; } if (p->next + 5 < p->end && strncmp(p->next, "[:>:]]", 6) == 0) { EMIT(OEOW, 0); NEXTn(6); return; } if (EAT('^')) invert++; /* make note to invert set at end */ if (EAT(']')) CHadd(cs, ']'); else if (EAT('-')) CHadd(cs, '-'); while (MORE() && PEEK() != ']' && !SEETWO('-', ']')) p_b_term(p, cs); if (EAT('-')) CHadd(cs, '-'); MUSTEAT(']', REG_EBRACK); if (p->error != 0) /* don't mess things up further */ return; if (p->g->cflags®_ICASE) { register int i; register int ci; for (i = p->g->csetsize - 1; i >= 0; i--) if (CHIN(cs, i) && isalpha(i)) { ci = othercase(i); if (ci != i) CHadd(cs, ci); } if (cs->multis != NULL) mccase(p, cs); } if (invert) { register int i; for (i = p->g->csetsize - 1; i >= 0; i--) if (CHIN(cs, i)) CHsub(cs, i); else CHadd(cs, i); if (p->g->cflags®_NEWLINE) CHsub(cs, '\n'); if (cs->multis != NULL) mcinvert(p, cs); } assert(cs->multis == NULL); /* xxx */ if (nch(p, cs) == 1) { /* optimize singleton sets */ ordinary(p, firstch(p, cs)); freeset(p, cs); } else EMIT(OANYOF, freezeset(p, cs)); } /* - p_b_term - parse one term of a bracketed character list == static void p_b_term(register struct parse *p, register cset *cs); */ static void p_b_term(p, cs) register struct parse *p; register cset *cs; { register char c; register char start, finish; register int i; /* classify what we've got */ switch ((MORE()) ? PEEK() : '\0') { case '[': c = (MORE2()) ? PEEK2() : '\0'; break; case '-': SETERROR(REG_ERANGE); return; /* NOTE RETURN */ break; default: c = '\0'; break; } switch (c) { case ':': /* character class */ NEXT2(); REQUIRE(MORE(), REG_EBRACK); c = PEEK(); REQUIRE(c != '-' && c != ']', REG_ECTYPE); p_b_cclass(p, cs); REQUIRE(MORE(), REG_EBRACK); REQUIRE(EATTWO(':', ']'), REG_ECTYPE); break; case '=': /* equivalence class */ NEXT2(); REQUIRE(MORE(), REG_EBRACK); c = PEEK(); REQUIRE(c != '-' && c != ']', REG_ECOLLATE); p_b_eclass(p, cs); REQUIRE(MORE(), REG_EBRACK); REQUIRE(EATTWO('=', ']'), REG_ECOLLATE); break; default: /* symbol, ordinary character, or range */ /* xxx revision needed for multichar stuff */ start = p_b_symbol(p); if (SEE('-') && MORE2() && PEEK2() != ']') { /* range */ NEXT(); if (EAT('-')) finish = '-'; else finish = p_b_symbol(p); } else finish = start; /* xxx what about signed chars here... */ REQUIRE(start <= finish, REG_ERANGE); for (i = start; i <= finish; i++) CHadd(cs, i); break; } } /* - p_b_cclass - parse a character-class name and deal with it == static void p_b_cclass(register struct parse *p, register cset *cs); */ static void p_b_cclass(p, cs) register struct parse *p; register cset *cs; { register char *sp = p->next; register struct cclass *cp; register size_t len; register char *u; register char c; while (MORE() && isalpha(PEEK())) NEXT(); len = p->next - sp; for (cp = cclasses; cp->name != NULL; cp++) if (strncmp(cp->name, sp, len) == 0 && cp->name[len] == '\0') break; if (cp->name == NULL) { /* oops, didn't find it */ SETERROR(REG_ECTYPE); return; } u = cp->chars; while ((c = *u++) != '\0') CHadd(cs, c); for (u = cp->multis; *u != '\0'; u += strlen(u) + 1) MCadd(p, cs, u); } /* - p_b_eclass - parse an equivalence-class name and deal with it == static void p_b_eclass(register struct parse *p, register cset *cs); * * This implementation is incomplete. xxx */ static void p_b_eclass(p, cs) register struct parse *p; register cset *cs; { register char c; c = p_b_coll_elem(p, '='); CHadd(cs, c); } /* - p_b_symbol - parse a character or [..]ed multicharacter collating symbol == static char p_b_symbol(register struct parse *p); */ static char /* value of symbol */ p_b_symbol(p) register struct parse *p; { register char value; REQUIRE(MORE(), REG_EBRACK); if (!EATTWO('[', '.')) return(GETNEXT()); /* collating symbol */ value = p_b_coll_elem(p, '.'); REQUIRE(EATTWO('.', ']'), REG_ECOLLATE); return(value); } /* - p_b_coll_elem - parse a collating-element name and look it up == static char p_b_coll_elem(register struct parse *p, int endc); */ static char /* value of collating element */ p_b_coll_elem(p, endc) register struct parse *p; int endc; /* name ended by endc,']' */ { register char *sp = p->next; register struct cname *cp; register int len; register char c; while (MORE() && !SEETWO(endc, ']')) NEXT(); if (!MORE()) { SETERROR(REG_EBRACK); return(0); } len = p->next - sp; for (cp = cnames; cp->name != NULL; cp++) if (strncmp(cp->name, sp, len) == 0 && cp->name[len] == '\0') return(cp->code); /* known name */ if (len == 1) return(*sp); /* single character */ SETERROR(REG_ECOLLATE); /* neither */ return(0); } /* - othercase - return the case counterpart of an alphabetic == static char othercase(int ch); */ static char /* if no counterpart, return ch */ othercase(ch) int ch; { assert(isalpha(ch)); if (isupper(ch)) return(tolower(ch)); else if (islower(ch)) return(toupper(ch)); else /* peculiar, but could happen */ return(ch); } /* - bothcases - emit a dualcase version of a two-case character == static void bothcases(register struct parse *p, int ch); * * Boy, is this implementation ever a kludge... */ static void bothcases(p, ch) register struct parse *p; int ch; { register char *oldnext = p->next; register char *oldend = p->end; char bracket[3]; assert(othercase(ch) != ch); /* p_bracket() would recurse */ p->next = bracket; p->end = bracket+2; bracket[0] = ch; bracket[1] = ']'; bracket[2] = '\0'; p_bracket(p); assert(p->next == bracket+2); p->next = oldnext; p->end = oldend; } /* - ordinary - emit an ordinary character == static void ordinary(register struct parse *p, register int ch); */ static void ordinary(p, ch) register struct parse *p; register int ch; { register cat_t *cap = p->g->categories; if ((p->g->cflags®_ICASE) && isalpha(ch) && othercase(ch) != ch) bothcases(p, ch); else { EMIT(OCHAR, (unsigned char)ch); if (cap[ch] == 0) cap[ch] = p->g->ncategories++; } } /* - nonnewline - emit REG_NEWLINE version of OANY == static void nonnewline(register struct parse *p); * * Boy, is this implementation ever a kludge... */ static void nonnewline(p) register struct parse *p; { register char *oldnext = p->next; register char *oldend = p->end; char bracket[4]; p->next = bracket; p->end = bracket+3; bracket[0] = '^'; bracket[1] = '\n'; bracket[2] = ']'; bracket[3] = '\0'; p_bracket(p); assert(p->next == bracket+3); p->next = oldnext; p->end = oldend; } /* - repeat - generate code for a bounded repetition, recursively if needed == static void repeat(register struct parse *p, sopno start, int from, int to); */ static void repeat(p, start, from, to) register struct parse *p; sopno start; /* operand from here to end of strip */ int from; /* repeated from this number */ int to; /* to this number of times (maybe INFINITY) */ { register sopno finish = HERE(); # define N 2 # define INF 3 # define REP(f, t) ((f)*8 + (t)) # define MAP(n) (((n) <= 1) ? (n) : ((n) == INFINITY) ? INF : N) register sopno copy; if (p->error != 0) /* head off possible runaway recursion */ return; assert(from <= to); switch (REP(MAP(from), MAP(to))) { case REP(0, 0): /* must be user doing this */ DROP(finish-start); /* drop the operand */ break; case REP(0, 1): /* as x{1,1}? */ case REP(0, N): /* as x{1,n}? */ case REP(0, INF): /* as x{1,}? */ /* KLUDGE: emit y? as (y|) until subtle bug gets fixed */ INSERT(OCH_, start); /* offset is wrong... */ repeat(p, start+1, 1, to); ASTERN(OOR1, start); AHEAD(start); /* ... fix it */ EMIT(OOR2, 0); AHEAD(THERE()); ASTERN(O_CH, THERETHERE()); break; case REP(1, 1): /* trivial case */ /* done */ break; case REP(1, N): /* as x?x{1,n-1} */ /* KLUDGE: emit y? as (y|) until subtle bug gets fixed */ INSERT(OCH_, start); ASTERN(OOR1, start); AHEAD(start); EMIT(OOR2, 0); /* offset very wrong... */ AHEAD(THERE()); /* ...so fix it */ ASTERN(O_CH, THERETHERE()); copy = dupl(p, start+1, finish+1); assert(copy == finish+4); repeat(p, copy, 1, to-1); break; case REP(1, INF): /* as x+ */ INSERT(OPLUS_, start); ASTERN(O_PLUS, start); break; case REP(N, N): /* as xx{m-1,n-1} */ copy = dupl(p, start, finish); repeat(p, copy, from-1, to-1); break; case REP(N, INF): /* as xx{n-1,INF} */ copy = dupl(p, start, finish); repeat(p, copy, from-1, to); break; default: /* "can't happen" */ SETERROR(REG_ASSERT); /* just in case */ break; } } /* - seterr - set an error condition == static int seterr(register struct parse *p, int e); */ static int /* useless but makes type checking happy */ seterr(p, e) register struct parse *p; int e; { if (p->error == 0) /* keep earliest error condition */ p->error = e; p->next = nuls; /* try to bring things to a halt */ p->end = nuls; return(0); /* make the return value well-defined */ } /* - allocset - allocate a set of characters for [] == static cset *allocset(register struct parse *p); */ static cset * allocset(p) register struct parse *p; { register int no = p->g->ncsets++; register size_t nc; register size_t nbytes; register cset *cs; register size_t css = (size_t)p->g->csetsize; register int i; if (no >= p->ncsalloc) { /* need another column of space */ p->ncsalloc += CHAR_BIT; nc = p->ncsalloc; assert(nc % CHAR_BIT == 0); nbytes = nc / CHAR_BIT * css; if (p->g->sets == NULL) p->g->sets = (cset *)malloc(nc * sizeof(cset)); else p->g->sets = (cset *)realloc((char *)p->g->sets, nc * sizeof(cset)); if (p->g->setbits == NULL) p->g->setbits = (uch *)malloc(nbytes); else { p->g->setbits = (uch *)realloc((char *)p->g->setbits, nbytes); /* xxx this isn't right if setbits is now NULL */ for (i = 0; i < no; i++) p->g->sets[i].ptr = p->g->setbits + css*(i/CHAR_BIT); } if (p->g->sets != NULL && p->g->setbits != NULL) (void) memset((char *)p->g->setbits + (nbytes - css), 0, css); else { no = 0; SETERROR(REG_ESPACE); /* caller's responsibility not to do set ops */ } } assert(p->g->sets != NULL); /* xxx */ cs = &p->g->sets[no]; cs->ptr = p->g->setbits + css*((no)/CHAR_BIT); cs->mask = 1 << ((no) % CHAR_BIT); cs->hash = 0; cs->smultis = 0; cs->multis = NULL; return(cs); } /* - freeset - free a now-unused set == static void freeset(register struct parse *p, register cset *cs); */ static void freeset(p, cs) register struct parse *p; register cset *cs; { register int i; register cset *top = &p->g->sets[p->g->ncsets]; register size_t css = (size_t)p->g->csetsize; for (i = 0; i < css; i++) CHsub(cs, i); if (cs == top-1) /* recover only the easy case */ p->g->ncsets--; } /* - freezeset - final processing on a set of characters == static int freezeset(register struct parse *p, register cset *cs); * * The main task here is merging identical sets. This is usually a waste * of time (although the hash code minimizes the overhead), but can win * big if REG_ICASE is being used. REG_ICASE, by the way, is why the hash * is done using addition rather than xor -- all ASCII [aA] sets xor to * the same value! */ static int /* set number */ freezeset(p, cs) register struct parse *p; register cset *cs; { register uch h = cs->hash; register int i; register cset *top = &p->g->sets[p->g->ncsets]; register cset *cs2; register size_t css = (size_t)p->g->csetsize; /* look for an earlier one which is the same */ for (cs2 = &p->g->sets[0]; cs2 < top; cs2++) if (cs2->hash == h && cs2 != cs) { /* maybe */ for (i = 0; i < css; i++) if (!!CHIN(cs2, i) != !!CHIN(cs, i)) break; /* no */ if (i == css) break; /* yes */ } if (cs2 < top) { /* found one */ freeset(p, cs); cs = cs2; } return((int)(cs - p->g->sets)); } /* - firstch - return first character in a set (which must have at least one) == static int firstch(register struct parse *p, register cset *cs); */ static int /* character; there is no "none" value */ firstch(p, cs) register struct parse *p; register cset *cs; { register int i; register size_t css = (size_t)p->g->csetsize; for (i = 0; i < css; i++) if (CHIN(cs, i)) return((char)i); assert(never); return(0); /* arbitrary */ } /* - nch - number of characters in a set == static int nch(register struct parse *p, register cset *cs); */ static int nch(p, cs) register struct parse *p; register cset *cs; { register int i; register size_t css = (size_t)p->g->csetsize; register int n = 0; for (i = 0; i < css; i++) if (CHIN(cs, i)) n++; return(n); } /* - mcadd - add a collating element to a cset == static void mcadd(register struct parse *p, register cset *cs, \ == register char *cp); */ static void mcadd(p, cs, cp) register struct parse *p; register cset *cs; register char *cp; { register size_t oldend = cs->smultis; cs->smultis += strlen(cp) + 1; if (cs->multis == NULL) cs->multis = malloc(cs->smultis); else cs->multis = realloc(cs->multis, cs->smultis); if (cs->multis == NULL) { SETERROR(REG_ESPACE); return; } (void) strcpy(cs->multis + oldend - 1, cp); cs->multis[cs->smultis - 1] = '\0'; } /* - mcsub - subtract a collating element from a cset == static void mcsub(register cset *cs, register char *cp); */ static void mcsub(cs, cp) register cset *cs; register char *cp; { register char *fp = mcfind(cs, cp); register size_t len = strlen(fp); assert(fp != NULL); (void) memmove(fp, fp + len + 1, cs->smultis - (fp + len + 1 - cs->multis)); cs->smultis -= len; if (cs->smultis == 0) { free(cs->multis); cs->multis = NULL; return; } cs->multis = realloc(cs->multis, cs->smultis); assert(cs->multis != NULL); } /* - mcin - is a collating element in a cset? == static int mcin(register cset *cs, register char *cp); */ static int mcin(cs, cp) register cset *cs; register char *cp; { return(mcfind(cs, cp) != NULL); } /* - mcfind - find a collating element in a cset == static char *mcfind(register cset *cs, register char *cp); */ static char * mcfind(cs, cp) register cset *cs; register char *cp; { register char *p; if (cs->multis == NULL) return(NULL); for (p = cs->multis; *p != '\0'; p += strlen(p) + 1) if (strcmp(cp, p) == 0) return(p); return(NULL); } /* - mcinvert - invert the list of collating elements in a cset == static void mcinvert(register struct parse *p, register cset *cs); * * This would have to know the set of possibilities. Implementation * is deferred. */ static void mcinvert(p, cs) register struct parse *p; register cset *cs; { assert(cs->multis == NULL); /* xxx */ } /* - mccase - add case counterparts of the list of collating elements in a cset == static void mccase(register struct parse *p, register cset *cs); * * This would have to know the set of possibilities. Implementation * is deferred. */ static void mccase(p, cs) register struct parse *p; register cset *cs; { assert(cs->multis == NULL); /* xxx */ } /* - isinsets - is this character in any sets? == static int isinsets(register struct re_guts *g, int c); */ static int /* predicate */ isinsets(g, c) register struct re_guts *g; int c; { register uch *col; register int i; register int ncols = (g->ncsets+(CHAR_BIT-1)) / CHAR_BIT; register unsigned uc = (unsigned char)c; for (i = 0, col = g->setbits; i < ncols; i++, col += g->csetsize) if (col[uc] != 0) return(1); return(0); } /* - samesets - are these two characters in exactly the same sets? == static int samesets(register struct re_guts *g, int c1, int c2); */ static int /* predicate */ samesets(g, c1, c2) register struct re_guts *g; int c1; int c2; { register uch *col; register int i; register int ncols = (g->ncsets+(CHAR_BIT-1)) / CHAR_BIT; register unsigned uc1 = (unsigned char)c1; register unsigned uc2 = (unsigned char)c2; for (i = 0, col = g->setbits; i < ncols; i++, col += g->csetsize) if (col[uc1] != col[uc2]) return(0); return(1); } /* - categorize - sort out character categories == static void categorize(struct parse *p, register struct re_guts *g); */ static void categorize(p, g) struct parse *p; register struct re_guts *g; { register cat_t *cats = g->categories; register int c; register int c2; register cat_t cat; /* avoid making error situations worse */ if (p->error != 0) return; for (c = CHAR_MIN; c <= CHAR_MAX; c++) if (cats[c] == 0 && isinsets(g, c)) { cat = g->ncategories++; cats[c] = cat; for (c2 = c+1; c2 <= CHAR_MAX; c2++) if (cats[c2] == 0 && samesets(g, c, c2)) cats[c2] = cat; } } /* - dupl - emit a duplicate of a bunch of sops == static sopno dupl(register struct parse *p, sopno start, sopno finish); */ static sopno /* start of duplicate */ dupl(p, start, finish) register struct parse *p; sopno start; /* from here */ sopno finish; /* to this less one */ { register sopno ret = HERE(); register sopno len = finish - start; assert(finish >= start); if (len == 0) return(ret); enlarge(p, p->ssize + len); /* this many unexpected additions */ assert(p->ssize >= p->slen + len); (void) memcpy((char *)(p->strip + p->slen), (char *)(p->strip + start), (size_t)len*sizeof(sop)); p->slen += len; return(ret); } /* - doemit - emit a strip operator == static void doemit(register struct parse *p, sop op, size_t opnd); * * It might seem better to implement this as a macro with a function as * hard-case backup, but it's just too big and messy unless there are * some changes to the data structures. Maybe later. */ static void doemit(p, op, opnd) register struct parse *p; sop op; size_t opnd; { /* avoid making error situations worse */ if (p->error != 0) return; /* deal with oversize operands ("can't happen", more or less) */ assert(opnd < 1<slen >= p->ssize) enlarge(p, (p->ssize+1) / 2 * 3); /* +50% */ assert(p->slen < p->ssize); /* finally, it's all reduced to the easy case */ p->strip[p->slen++] = SOP(op, opnd); } /* - doinsert - insert a sop into the strip == static void doinsert(register struct parse *p, sop op, size_t opnd, sopno pos); */ static void doinsert(p, op, opnd, pos) register struct parse *p; sop op; size_t opnd; sopno pos; { register sopno sn; register sop s; register int i; /* avoid making error situations worse */ if (p->error != 0) return; sn = HERE(); EMIT(op, opnd); /* do checks, ensure space */ assert(HERE() == sn+1); s = p->strip[sn]; /* adjust paren pointers */ assert(pos > 0); for (i = 1; i < NPAREN; i++) { if (p->pbegin[i] >= pos) { p->pbegin[i]++; } if (p->pend[i] >= pos) { p->pend[i]++; } } memmove((char *)&p->strip[pos+1], (char *)&p->strip[pos], (HERE()-pos-1)*sizeof(sop)); p->strip[pos] = s; } /* - dofwd - complete a forward reference == static void dofwd(register struct parse *p, sopno pos, sop value); */ static void dofwd(p, pos, value) register struct parse *p; register sopno pos; sop value; { /* avoid making error situations worse */ if (p->error != 0) return; assert(value < 1<strip[pos] = OP(p->strip[pos]) | value; } /* - enlarge - enlarge the strip == static void enlarge(register struct parse *p, sopno size); */ static void enlarge(p, size) register struct parse *p; register sopno size; { register sop *sp; if (p->ssize >= size) return; sp = (sop *)realloc(p->strip, size*sizeof(sop)); if (sp == NULL) { SETERROR(REG_ESPACE); return; } p->strip = sp; p->ssize = size; } /* - stripsnug - compact the strip == static void stripsnug(register struct parse *p, register struct re_guts *g); */ static void stripsnug(p, g) register struct parse *p; register struct re_guts *g; { g->nstates = p->slen; g->strip = (sop *)realloc((char *)p->strip, p->slen * sizeof(sop)); if (g->strip == NULL) { SETERROR(REG_ESPACE); g->strip = p->strip; } } /* - findmust - fill in must and mlen with longest mandatory literal string == static void findmust(register struct parse *p, register struct re_guts *g); * * This algorithm could do fancy things like analyzing the operands of | * for common subsequences. Someday. This code is simple and finds most * of the interesting cases. * * Note that must and mlen got initialized during setup. */ static void findmust(p, g) struct parse *p; register struct re_guts *g; { register sop *scan; sop *start; register sop *newstart; register sopno newlen; register sop s; register char *cp; register sopno i; /* avoid making error situations worse */ if (p->error != 0) return; /* find the longest OCHAR sequence in strip */ newlen = 0; scan = g->strip + 1; do { s = *scan++; switch (OP(s)) { case OCHAR: /* sequence member */ if (newlen == 0) /* new sequence */ newstart = scan - 1; newlen++; break; case OPLUS_: /* things that don't break one */ case OLPAREN: case ORPAREN: break; case OQUEST_: /* things that must be skipped */ case OCH_: scan--; do { scan += OPND(s); s = *scan; /* assert() interferes w debug printouts */ if (OP(s) != O_QUEST && OP(s) != O_CH && OP(s) != OOR2) { g->iflags |= BAD; return; } } while (OP(s) != O_QUEST && OP(s) != O_CH); /* fallthrough */ default: /* things that break a sequence */ if (newlen > g->mlen) { /* ends one */ start = newstart; g->mlen = newlen; } newlen = 0; break; } } while (OP(s) != OEND); if (g->mlen == 0) /* there isn't one */ return; /* turn it into a character string */ g->must = malloc((size_t)g->mlen + 1); if (g->must == NULL) { /* argh; just forget it */ g->mlen = 0; return; } cp = g->must; scan = start; for (i = g->mlen; i > 0; i--) { while (OP(s = *scan++) != OCHAR) continue; assert(cp < g->must + g->mlen); *cp++ = (char)OPND(s); } assert(cp == g->must + g->mlen); *cp++ = '\0'; /* just on general principles */ } /* - pluscount - count + nesting == static sopno pluscount(register struct parse *p, register struct re_guts *g); */ static sopno /* nesting depth */ pluscount(p, g) struct parse *p; register struct re_guts *g; { register sop *scan; register sop s; register sopno plusnest = 0; register sopno maxnest = 0; if (p->error != 0) return(0); /* there may not be an OEND */ scan = g->strip + 1; do { s = *scan++; switch (OP(s)) { case OPLUS_: plusnest++; break; case O_PLUS: if (plusnest > maxnest) maxnest = plusnest; plusnest--; break; } } while (OP(s) != OEND); if (plusnest != 0) g->iflags |= BAD; return(maxnest); } vigor-0.016.orig/regex/regerror.c0100644000076400007640000001272507103707264015410 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)regerror.c 8.3 (Berkeley) 3/19/94 */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)regerror.c 8.3 (Berkeley) 3/19/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include #include #include #include "utils.h" /* ========= begin header generated by ./mkh ========= */ #ifdef __cplusplus extern "C" { #endif /* === regerror.c === */ static char *regatoi __P((const regex_t *preg, char *localbuf)); #ifdef __cplusplus } #endif /* ========= end header generated by ./mkh ========= */ /* = #define REG_NOMATCH 1 = #define REG_BADPAT 2 = #define REG_ECOLLATE 3 = #define REG_ECTYPE 4 = #define REG_EESCAPE 5 = #define REG_ESUBREG 6 = #define REG_EBRACK 7 = #define REG_EPAREN 8 = #define REG_EBRACE 9 = #define REG_BADBR 10 = #define REG_ERANGE 11 = #define REG_ESPACE 12 = #define REG_BADRPT 13 = #define REG_EMPTY 14 = #define REG_ASSERT 15 = #define REG_INVARG 16 = #define REG_ATOI 255 // convert name to number (!) = #define REG_ITOA 0400 // convert number to name (!) */ static struct rerr { int code; char *name; char *explain; } rerrs[] = { REG_NOMATCH, "REG_NOMATCH", "regexec() failed to match", REG_BADPAT, "REG_BADPAT", "invalid regular expression", REG_ECOLLATE, "REG_ECOLLATE", "invalid collating element", REG_ECTYPE, "REG_ECTYPE", "invalid character class", REG_EESCAPE, "REG_EESCAPE", "trailing backslash (\\)", REG_ESUBREG, "REG_ESUBREG", "invalid backreference number", REG_EBRACK, "REG_EBRACK", "brackets ([ ]) not balanced", REG_EPAREN, "REG_EPAREN", "parentheses not balanced", REG_EBRACE, "REG_EBRACE", "braces not balanced", REG_BADBR, "REG_BADBR", "invalid repetition count(s)", REG_ERANGE, "REG_ERANGE", "invalid character range", REG_ESPACE, "REG_ESPACE", "out of memory", REG_BADRPT, "REG_BADRPT", "repetition-operator operand invalid", REG_EMPTY, "REG_EMPTY", "empty (sub)expression", REG_ASSERT, "REG_ASSERT", "\"can't happen\" -- you found a bug", REG_INVARG, "REG_INVARG", "invalid argument to regex routine", 0, "", "*** unknown regexp error code ***", }; /* - regerror - the interface to error numbers = extern size_t regerror(int, const regex_t *, char *, size_t); */ /* ARGSUSED */ size_t regerror(errcode, preg, errbuf, errbuf_size) int errcode; const regex_t *preg; char *errbuf; size_t errbuf_size; { register struct rerr *r; register size_t len; register int target = errcode &~ REG_ITOA; register char *s; char convbuf[50]; if (errcode == REG_ATOI) s = regatoi(preg, convbuf); else { for (r = rerrs; r->code != 0; r++) if (r->code == target) break; if (errcode®_ITOA) { if (r->code != 0) (void) strcpy(convbuf, r->name); else sprintf(convbuf, "REG_0x%x", target); assert(strlen(convbuf) < sizeof(convbuf)); s = convbuf; } else s = r->explain; } len = strlen(s) + 1; if (errbuf_size > 0) { if (errbuf_size > len) (void) strcpy(errbuf, s); else { (void) strncpy(errbuf, s, errbuf_size-1); errbuf[errbuf_size-1] = '\0'; } } return(len); } /* - regatoi - internal routine to implement REG_ATOI == static char *regatoi(const regex_t *preg, char *localbuf); */ static char * regatoi(preg, localbuf) const regex_t *preg; char *localbuf; { register struct rerr *r; register size_t siz; register char *p; for (r = rerrs; r->code != 0; r++) if (strcmp(r->name, preg->re_endp) == 0) break; if (r->code == 0) return("0"); sprintf(localbuf, "%d", r->code); return(localbuf); } vigor-0.016.orig/regex/regex.30100644000076400007640000004066007103707264014612 0ustar cjw44cjw44.\" Copyright (c) 1992, 1993, 1994 Henry Spencer. .\" Copyright (c) 1992, 1993, 1994 .\" The Regents of the University of California. All rights reserved. .\" .\" This code is derived from software contributed to Berkeley by .\" Henry Spencer of the University of Toronto. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. All advertising materials mentioning features or use of this software .\" must display the following acknowledgement: .\" This product includes software developed by the University of .\" California, Berkeley and its contributors. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)regex.3 8.2 (Berkeley) 3/16/94 .\" .TH REGEX 3 "March 16, 1994" .de ZR .\" one other place knows this name: the SEE ALSO section .IR re_format (7) \\$1 .. .SH NAME regcomp, regexec, regerror, regfree \- regular-expression library .SH SYNOPSIS .ft B .\".na #include .br #include .HP 10 int regcomp(regex_t\ *preg, const\ char\ *pattern, int\ cflags); .HP int\ regexec(const\ regex_t\ *preg, const\ char\ *string, size_t\ nmatch, regmatch_t\ pmatch[], int\ eflags); .HP size_t\ regerror(int\ errcode, const\ regex_t\ *preg, char\ *errbuf, size_t\ errbuf_size); .HP void\ regfree(regex_t\ *preg); .\".ad .ft .SH DESCRIPTION These routines implement POSIX 1003.2 regular expressions (``RE''s); see .ZR . .I Regcomp compiles an RE written as a string into an internal form, .I regexec matches that internal form against a string and reports results, .I regerror transforms error codes from either into human-readable messages, and .I regfree frees any dynamically-allocated storage used by the internal form of an RE. .PP The header .I declares two structure types, .I regex_t and .IR regmatch_t , the former for compiled internal forms and the latter for match reporting. It also declares the four functions, a type .IR regoff_t , and a number of constants with names starting with ``REG_''. .PP .I Regcomp compiles the regular expression contained in the .I pattern string, subject to the flags in .IR cflags , and places the results in the .I regex_t structure pointed to by .IR preg . .I Cflags is the bitwise OR of zero or more of the following flags: .IP REG_EXTENDED \w'REG_EXTENDED'u+2n Compile modern (``extended'') REs, rather than the obsolete (``basic'') REs that are the default. .IP REG_BASIC This is a synonym for 0, provided as a counterpart to REG_EXTENDED to improve readability. .IP REG_NOSPEC Compile with recognition of all special characters turned off. All characters are thus considered ordinary, so the ``RE'' is a literal string. This is an extension, compatible with but not specified by POSIX 1003.2, and should be used with caution in software intended to be portable to other systems. REG_EXTENDED and REG_NOSPEC may not be used in the same call to .IR regcomp . .IP REG_ICASE Compile for matching that ignores upper/lower case distinctions. See .ZR . .IP REG_NOSUB Compile for matching that need only report success or failure, not what was matched. .IP REG_NEWLINE Compile for newline-sensitive matching. By default, newline is a completely ordinary character with no special meaning in either REs or strings. With this flag, `[^' bracket expressions and `.' never match newline, a `^' anchor matches the null string after any newline in the string in addition to its normal function, and the `$' anchor matches the null string before any newline in the string in addition to its normal function. .IP REG_PEND The regular expression ends, not at the first NUL, but just before the character pointed to by the .I re_endp member of the structure pointed to by .IR preg . The .I re_endp member is of type .IR const\ char\ * . This flag permits inclusion of NULs in the RE; they are considered ordinary characters. This is an extension, compatible with but not specified by POSIX 1003.2, and should be used with caution in software intended to be portable to other systems. .PP When successful, .I regcomp returns 0 and fills in the structure pointed to by .IR preg . One member of that structure (other than .IR re_endp ) is publicized: .IR re_nsub , of type .IR size_t , contains the number of parenthesized subexpressions within the RE (except that the value of this member is undefined if the REG_NOSUB flag was used). If .I regcomp fails, it returns a non-zero error code; see DIAGNOSTICS. .PP .I Regexec matches the compiled RE pointed to by .I preg against the .IR string , subject to the flags in .IR eflags , and reports results using .IR nmatch , .IR pmatch , and the returned value. The RE must have been compiled by a previous invocation of .IR regcomp . The compiled form is not altered during execution of .IR regexec , so a single compiled RE can be used simultaneously by multiple threads. .PP By default, the NUL-terminated string pointed to by .I string is considered to be the text of an entire line, minus any terminating newline. The .I eflags argument is the bitwise OR of zero or more of the following flags: .IP REG_NOTBOL \w'REG_STARTEND'u+2n The first character of the string is not the beginning of a line, so the `^' anchor should not match before it. This does not affect the behavior of newlines under REG_NEWLINE. .IP REG_NOTEOL The NUL terminating the string does not end a line, so the `$' anchor should not match before it. This does not affect the behavior of newlines under REG_NEWLINE. .IP REG_STARTEND The string is considered to start at \fIstring\fR\ + \fIpmatch\fR[0].\fIrm_so\fR and to have a terminating NUL located at \fIstring\fR\ + \fIpmatch\fR[0].\fIrm_eo\fR (there need not actually be a NUL at that location), regardless of the value of .IR nmatch . See below for the definition of .IR pmatch and .IR nmatch . This is an extension, compatible with but not specified by POSIX 1003.2, and should be used with caution in software intended to be portable to other systems. Note that a non-zero \fIrm_so\fR does not imply REG_NOTBOL; REG_STARTEND affects only the location of the string, not how it is matched. .PP See .ZR for a discussion of what is matched in situations where an RE or a portion thereof could match any of several substrings of .IR string . .PP Normally, .I regexec returns 0 for success and the non-zero code REG_NOMATCH for failure. Other non-zero error codes may be returned in exceptional situations; see DIAGNOSTICS. .PP If REG_NOSUB was specified in the compilation of the RE, or if .I nmatch is 0, .I regexec ignores the .I pmatch argument (but see below for the case where REG_STARTEND is specified). Otherwise, .I pmatch points to an array of .I nmatch structures of type .IR regmatch_t . Such a structure has at least the members .I rm_so and .IR rm_eo , both of type .I regoff_t (a signed arithmetic type at least as large as an .I off_t and a .IR ssize_t ), containing respectively the offset of the first character of a substring and the offset of the first character after the end of the substring. Offsets are measured from the beginning of the .I string argument given to .IR regexec . An empty substring is denoted by equal offsets, both indicating the character following the empty substring. .PP The 0th member of the .I pmatch array is filled in to indicate what substring of .I string was matched by the entire RE. Remaining members report what substring was matched by parenthesized subexpressions within the RE; member .I i reports subexpression .IR i , with subexpressions counted (starting at 1) by the order of their opening parentheses in the RE, left to right. Unused entries in the array\(emcorresponding either to subexpressions that did not participate in the match at all, or to subexpressions that do not exist in the RE (that is, \fIi\fR\ > \fIpreg\fR\->\fIre_nsub\fR)\(emhave both .I rm_so and .I rm_eo set to \-1. If a subexpression participated in the match several times, the reported substring is the last one it matched. (Note, as an example in particular, that when the RE `(b*)+' matches `bbb', the parenthesized subexpression matches each of the three `b's and then an infinite number of empty strings following the last `b', so the reported substring is one of the empties.) .PP If REG_STARTEND is specified, .I pmatch must point to at least one .I regmatch_t (even if .I nmatch is 0 or REG_NOSUB was specified), to hold the input offsets for REG_STARTEND. Use for output is still entirely controlled by .IR nmatch ; if .I nmatch is 0 or REG_NOSUB was specified, the value of .IR pmatch [0] will not be changed by a successful .IR regexec . .PP .I Regerror maps a non-zero .I errcode from either .I regcomp or .I regexec to a human-readable, printable message. If .I preg is non-NULL, the error code should have arisen from use of the .I regex_t pointed to by .IR preg , and if the error code came from .IR regcomp , it should have been the result from the most recent .I regcomp using that .IR regex_t . .RI ( Regerror may be able to supply a more detailed message using information from the .IR regex_t .) .I Regerror places the NUL-terminated message into the buffer pointed to by .IR errbuf , limiting the length (including the NUL) to at most .I errbuf_size bytes. If the whole message won't fit, as much of it as will fit before the terminating NUL is supplied. In any case, the returned value is the size of buffer needed to hold the whole message (including terminating NUL). If .I errbuf_size is 0, .I errbuf is ignored but the return value is still correct. .PP If the .I errcode given to .I regerror is first ORed with REG_ITOA, the ``message'' that results is the printable name of the error code, e.g. ``REG_NOMATCH'', rather than an explanation thereof. If .I errcode is REG_ATOI, then .I preg shall be non-NULL and the .I re_endp member of the structure it points to must point to the printable name of an error code; in this case, the result in .I errbuf is the decimal digits of the numeric value of the error code (0 if the name is not recognized). REG_ITOA and REG_ATOI are intended primarily as debugging facilities; they are extensions, compatible with but not specified by POSIX 1003.2, and should be used with caution in software intended to be portable to other systems. Be warned also that they are considered experimental and changes are possible. .PP .I Regfree frees any dynamically-allocated storage associated with the compiled RE pointed to by .IR preg . The remaining .I regex_t is no longer a valid compiled RE and the effect of supplying it to .I regexec or .I regerror is undefined. .PP None of these functions references global variables except for tables of constants; all are safe for use from multiple threads if the arguments are safe. .SH IMPLEMENTATION CHOICES There are a number of decisions that 1003.2 leaves up to the implementor, either by explicitly saying ``undefined'' or by virtue of them being forbidden by the RE grammar. This implementation treats them as follows. .PP See .ZR for a discussion of the definition of case-independent matching. .PP There is no particular limit on the length of REs, except insofar as memory is limited. Memory usage is approximately linear in RE size, and largely insensitive to RE complexity, except for bounded repetitions. See BUGS for one short RE using them that will run almost any system out of memory. .PP A backslashed character other than one specifically given a magic meaning by 1003.2 (such magic meanings occur only in obsolete [``basic''] REs) is taken as an ordinary character. .PP Any unmatched [ is a REG_EBRACK error. .PP Equivalence classes cannot begin or end bracket-expression ranges. The endpoint of one range cannot begin another. .PP RE_DUP_MAX, the limit on repetition counts in bounded repetitions, is 255. .PP A repetition operator (?, *, +, or bounds) cannot follow another repetition operator. A repetition operator cannot begin an expression or subexpression or follow `^' or `|'. .PP `|' cannot appear first or last in a (sub)expression or after another `|', i.e. an operand of `|' cannot be an empty subexpression. An empty parenthesized subexpression, `()', is legal and matches an empty (sub)string. An empty string is not a legal RE. .PP A `{' followed by a digit is considered the beginning of bounds for a bounded repetition, which must then follow the syntax for bounds. A `{' \fInot\fR followed by a digit is considered an ordinary character. .PP `^' and `$' beginning and ending subexpressions in obsolete (``basic'') REs are anchors, not ordinary characters. .SH SEE ALSO grep(1), re_format(7) .PP POSIX 1003.2, sections 2.8 (Regular Expression Notation) and B.5 (C Binding for Regular Expression Matching). .SH DIAGNOSTICS Non-zero error codes from .I regcomp and .I regexec include the following: .PP .nf .ta \w'REG_ECOLLATE'u+3n REG_NOMATCH regexec() failed to match REG_BADPAT invalid regular expression REG_ECOLLATE invalid collating element REG_ECTYPE invalid character class REG_EESCAPE \e applied to unescapable character REG_ESUBREG invalid backreference number REG_EBRACK brackets [ ] not balanced REG_EPAREN parentheses ( ) not balanced REG_EBRACE braces { } not balanced REG_BADBR invalid repetition count(s) in { } REG_ERANGE invalid character range in [ ] REG_ESPACE ran out of memory REG_BADRPT ?, *, or + operand invalid REG_EMPTY empty (sub)expression REG_ASSERT ``can't happen''\(emyou found a bug REG_INVARG invalid argument, e.g. negative-length string .fi .SH HISTORY Originally written by Henry Spencer at University of Toronto. Altered for inclusion in the 4.4BSD distribution. .SH BUGS This is an alpha release with known defects. Please report problems. .PP There is one known functionality bug. The implementation of internationalization is incomplete: the locale is always assumed to be the default one of 1003.2, and only the collating elements etc. of that locale are available. .PP The back-reference code is subtle and doubts linger about its correctness in complex cases. .PP .I Regexec performance is poor. This will improve with later releases. .I Nmatch exceeding 0 is expensive; .I nmatch exceeding 1 is worse. .I Regexec is largely insensitive to RE complexity \fIexcept\fR that back references are massively expensive. RE length does matter; in particular, there is a strong speed bonus for keeping RE length under about 30 characters, with most special characters counting roughly double. .PP .I Regcomp implements bounded repetitions by macro expansion, which is costly in time and space if counts are large or bounded repetitions are nested. An RE like, say, `((((a{1,100}){1,100}){1,100}){1,100}){1,100}' will (eventually) run almost any existing machine out of swap space. .PP There are suspected problems with response to obscure error conditions. Notably, certain kinds of internal overflow, produced only by truly enormous REs or by multiply nested bounded repetitions, are probably not handled well. .PP Due to a mistake in 1003.2, things like `a)b' are legal REs because `)' is a special character only in the presence of a previous unmatched `('. This can't be fixed until the spec is fixed. .PP The standard's definition of back references is vague. For example, does `a\e(\e(b\e)*\e2\e)*d' match `abbbd'? Until the standard is clarified, behavior in such cases should not be relied on. .PP The implementation of word-boundary matching is a bit of a kludge, and bugs may lurk in combinations of word-boundary matching and anchoring. vigor-0.016.orig/regex/regex2.h0100644000076400007640000001640307103707264014757 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)regex2.h 8.3 (Berkeley) 3/16/94 */ /* * First, the stuff that ends up in the outside-world include file = typedef off_t regoff_t; = typedef struct { = int re_magic; = size_t re_nsub; // number of parenthesized subexpressions = const char *re_endp; // end pointer for REG_PEND = struct re_guts *re_g; // none of your business :-) = } regex_t; = typedef struct { = regoff_t rm_so; // start of match = regoff_t rm_eo; // end of match = } regmatch_t; */ /* * internals of regex_t */ #define MAGIC1 ((('r'^0200)<<8) | 'e') /* * The internal representation is a *strip*, a sequence of * operators ending with an endmarker. (Some terminology etc. is a * historical relic of earlier versions which used multiple strips.) * Certain oddities in the representation are there to permit running * the machinery backwards; in particular, any deviation from sequential * flow must be marked at both its source and its destination. Some * fine points: * * - OPLUS_ and O_PLUS are *inside* the loop they create. * - OQUEST_ and O_QUEST are *outside* the bypass they create. * - OCH_ and O_CH are *outside* the multi-way branch they create, while * OOR1 and OOR2 are respectively the end and the beginning of one of * the branches. Note that there is an implicit OOR2 following OCH_ * and an implicit OOR1 preceding O_CH. * * In state representations, an operator's bit is on to signify a state * immediately *preceding* "execution" of that operator. */ typedef unsigned long sop; /* strip operator */ typedef int sopno; #define OPRMASK 0xf8000000 #define OPDMASK 0x07ffffff #define OPSHIFT ((unsigned)27) #define OP(n) ((n)&OPRMASK) #define OPND(n) ((n)&OPDMASK) #define SOP(op, opnd) ((op)|(opnd)) /* operators meaning operand */ /* (back, fwd are offsets) */ #define OEND (1< uch [csetsize] */ uch mask; /* bit within array */ uch hash; /* hash code */ size_t smultis; char *multis; /* -> char[smulti] ab\0cd\0ef\0\0 */ } cset; /* note that CHadd and CHsub are unsafe, and CHIN doesn't yield 0/1 */ #define CHadd(cs, c) ((cs)->ptr[(uch)(c)] |= (cs)->mask, (cs)->hash += (c)) #define CHsub(cs, c) ((cs)->ptr[(uch)(c)] &= ~(cs)->mask, (cs)->hash -= (c)) #define CHIN(cs, c) ((cs)->ptr[(uch)(c)] & (cs)->mask) #define MCadd(p, cs, cp) mcadd(p, cs, cp) /* regcomp() internal fns */ #define MCsub(p, cs, cp) mcsub(p, cs, cp) #define MCin(p, cs, cp) mcin(p, cs, cp) /* stuff for character categories */ typedef unsigned char cat_t; /* * main compiled-expression structure */ struct re_guts { int magic; # define MAGIC2 ((('R'^0200)<<8)|'E') sop *strip; /* malloced area for strip */ int csetsize; /* number of bits in a cset vector */ int ncsets; /* number of csets in use */ cset *sets; /* -> cset [ncsets] */ uch *setbits; /* -> uch[csetsize][ncsets/CHAR_BIT] */ int cflags; /* copy of regcomp() cflags argument */ sopno nstates; /* = number of sops */ sopno firststate; /* the initial OEND (normally 0) */ sopno laststate; /* the final OEND */ int iflags; /* internal flags */ # define USEBOL 01 /* used ^ */ # define USEEOL 02 /* used $ */ # define BAD 04 /* something wrong */ int nbol; /* number of ^ used */ int neol; /* number of $ used */ int ncategories; /* how many character categories */ cat_t *categories; /* ->catspace[-CHAR_MIN] */ char *must; /* match must contain this string */ int mlen; /* length of must */ size_t nsub; /* copy of re_nsub */ int backrefs; /* does it use back references? */ sopno nplus; /* how deep does it nest +s? */ /* catspace must be last */ cat_t catspace[1]; /* actually [NC] */ }; /* misc utilities */ #define OUT (CHAR_MAX+1) /* a non-character value */ #define ISWORD(c) (isalnum(c) || (c) == '_') vigor-0.016.orig/regex/regexec.c0100644000076400007640000001436007103707264015200 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)regexec.c 8.2 (Berkeley) 3/16/94 */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)regexec.c 8.2 (Berkeley) 3/16/94"; #endif /* LIBC_SCCS and not lint */ /* * the outer shell of regexec() * * This file includes engine.c *twice*, after muchos fiddling with the * macros that code uses. This lets the same code operate on two different * representations for state sets. */ #include #include #include #include #include #include #include #include "utils.h" #include "regex2.h" static int nope = 0; /* for use in asserts; shuts lint up */ /* macros for manipulating states, small version */ #define states int #define states1 states /* for later use in regexec() decision */ #define CLEAR(v) ((v) = 0) #define SET0(v, n) ((v) &= ~(1 << (n))) #define SET1(v, n) ((v) |= 1 << (n)) #define ISSET(v, n) ((v) & (1 << (n))) #define ASSIGN(d, s) ((d) = (s)) #define EQ(a, b) ((a) == (b)) #define STATEVARS int dummy /* dummy version */ #define STATESETUP(m, n) /* nothing */ #define STATETEARDOWN(m) /* nothing */ #define SETUP(v) ((v) = 0) #define onestate int #define INIT(o, n) ((o) = (unsigned)1 << (n)) #define INC(o) ((o) <<= 1) #define ISSTATEIN(v, o) ((v) & (o)) /* some abbreviations; note that some of these know variable names! */ /* do "if I'm here, I can also be there" etc without branches */ #define FWD(dst, src, n) ((dst) |= ((unsigned)(src)&(here)) << (n)) #define BACK(dst, src, n) ((dst) |= ((unsigned)(src)&(here)) >> (n)) #define ISSETBACK(v, n) ((v) & ((unsigned)here >> (n))) /* function names */ #define SNAMES /* engine.c looks after details */ #include "engine.c" /* now undo things */ #undef states #undef CLEAR #undef SET0 #undef SET1 #undef ISSET #undef ASSIGN #undef EQ #undef STATEVARS #undef STATESETUP #undef STATETEARDOWN #undef SETUP #undef onestate #undef INIT #undef INC #undef ISSTATEIN #undef FWD #undef BACK #undef ISSETBACK #undef SNAMES /* macros for manipulating states, large version */ #define states char * #define CLEAR(v) memset(v, 0, m->g->nstates) #define SET0(v, n) ((v)[n] = 0) #define SET1(v, n) ((v)[n] = 1) #define ISSET(v, n) ((v)[n]) #define ASSIGN(d, s) memcpy(d, s, m->g->nstates) #define EQ(a, b) (memcmp(a, b, m->g->nstates) == 0) #define STATEVARS int vn; char *space #define STATESETUP(m, nv) { (m)->space = malloc((nv)*(m)->g->nstates); \ if ((m)->space == NULL) return(REG_ESPACE); \ (m)->vn = 0; } #define STATETEARDOWN(m) { free((m)->space); } #define SETUP(v) ((v) = &m->space[m->vn++ * m->g->nstates]) #define onestate int #define INIT(o, n) ((o) = (n)) #define INC(o) ((o)++) #define ISSTATEIN(v, o) ((v)[o]) /* some abbreviations; note that some of these know variable names! */ /* do "if I'm here, I can also be there" etc without branches */ #define FWD(dst, src, n) ((dst)[here+(n)] |= (src)[here]) #define BACK(dst, src, n) ((dst)[here-(n)] |= (src)[here]) #define ISSETBACK(v, n) ((v)[here - (n)]) /* function names */ #define LNAMES /* flag */ #include "engine.c" /* - regexec - interface for matching = extern int regexec(const regex_t *, const char *, size_t, \ = regmatch_t [], int); = #define REG_NOTBOL 00001 = #define REG_NOTEOL 00002 = #define REG_STARTEND 00004 = #define REG_TRACE 00400 // tracing of execution = #define REG_LARGE 01000 // force large representation = #define REG_BACKR 02000 // force use of backref code * * We put this here so we can exploit knowledge of the state representation * when choosing which matcher to call. Also, by this point the matchers * have been prototyped. */ int /* 0 success, REG_NOMATCH failure */ regexec(preg, string, nmatch, pmatch, eflags) const regex_t *preg; const char *string; size_t nmatch; regmatch_t pmatch[]; int eflags; { register struct re_guts *g = preg->re_g; #ifdef REDEBUG # define GOODFLAGS(f) (f) #else # define GOODFLAGS(f) ((f)&(REG_NOTBOL|REG_NOTEOL|REG_STARTEND)) #endif if (preg->re_magic != MAGIC1 || g->magic != MAGIC2) return(REG_BADPAT); assert(!(g->iflags&BAD)); if (g->iflags&BAD) /* backstop for no-debug case */ return(REG_BADPAT); eflags = GOODFLAGS(eflags); if (g->nstates <= CHAR_BIT*sizeof(states1) && !(eflags®_LARGE)) return(smatcher(g, (char *)string, nmatch, pmatch, eflags)); else return(lmatcher(g, (char *)string, nmatch, pmatch, eflags)); } vigor-0.016.orig/regex/regfree.c0100644000076400007640000000553407103707264015200 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 Henry Spencer. * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Henry Spencer of the University of Toronto. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)regfree.c 8.2 (Berkeley) 3/16/94 */ #if defined(LIBC_SCCS) && !defined(lint) static char sccsid[] = "@(#)regfree.c 8.2 (Berkeley) 3/16/94"; #endif /* LIBC_SCCS and not lint */ #include #include #include #include #include "utils.h" #include "regex2.h" /* - regfree - free everything = extern void regfree(regex_t *); */ void regfree(preg) regex_t *preg; { register struct re_guts *g; if (preg->re_magic != MAGIC1) /* oops */ return; /* nice to complain, but hard */ g = preg->re_g; if (g == NULL || g->magic != MAGIC2) /* oops again */ return; preg->re_magic = 0; /* mark it invalid */ g->magic = 0; /* mark it invalid */ if (g->strip != NULL) free((char *)g->strip); if (g->sets != NULL) free((char *)g->sets); if (g->setbits != NULL) free((char *)g->setbits); if (g->must != NULL) free(g->must); free((char *)g); } vigor-0.016.orig/regex/COPYRIGHT0100644000076400007640000000551607103707264014710 0ustar cjw44cjw44Copyright 1992, 1993, 1994 Henry Spencer. All rights reserved. This software is not subject to any license of the American Telephone and Telegraph Company or of the Regents of the University of California. Permission is granted to anyone to use this software for any purpose on any computer system, and to alter it and redistribute it, subject to the following restrictions: 1. The author is not responsible for the consequences of use of this software, no matter how awful, even if they arise from flaws in it. 2. The origin of this software must not be misrepresented, either by explicit claim or by omission. Since few users ever read sources, credits must appear in the documentation. 3. Altered versions must be plainly marked as such, and must not be misrepresented as being the original software. Since few users ever read sources, credits must appear in the documentation. 4. This notice may not be removed or altered. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= /*- * Copyright (c) 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)COPYRIGHT 8.1 (Berkeley) 3/16/94 */ vigor-0.016.orig/ex/0040755000076400007640000000000007103707315012710 5ustar cjw44cjw44vigor-0.016.orig/ex/ex.h0100644000076400007640000002101407103707264013473 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)ex.h 10.24 (Berkeley) 8/12/96 */ #define PROMPTCHAR ':' /* Prompt using a colon. */ typedef struct _excmdlist { /* Ex command table structure. */ char *name; /* Command name, underlying function. */ int (*fn) __P((SCR *, EXCMD *)); #define E_ADDR1 0x00000001 /* One address. */ #define E_ADDR2 0x00000002 /* Two addresses. */ #define E_ADDR2_ALL 0x00000004 /* Zero/two addresses; zero == all. */ #define E_ADDR2_NONE 0x00000008 /* Zero/two addresses; zero == none. */ #define E_ADDR_ZERO 0x00000010 /* 0 is a legal addr1. */ #define E_ADDR_ZERODEF 0x00000020 /* 0 is default addr1 of empty files. */ #define E_AUTOPRINT 0x00000040 /* Command always sets autoprint. */ #define E_CLRFLAG 0x00000080 /* Clear the print (#, l, p) flags. */ #define E_NEWSCREEN 0x00000100 /* Create a new screen. */ #define E_SECURE 0x00000200 /* Permission denied if O_SECURE set. */ #define E_VIONLY 0x00000400 /* Meaningful only in vi. */ #define __INUSE1 0xfffff800 /* Same name space as EX_PRIVATE. */ u_int16_t flags; char *syntax; /* Syntax script. */ char *usage; /* Usage line. */ char *help; /* Help line. */ } EXCMDLIST; #define MAXCMDNAMELEN 12 /* Longest command name. */ extern EXCMDLIST const cmds[]; /* Table of ex commands. */ /* * !!! * QUOTING NOTE: * * Historically, .exrc files and EXINIT variables could only use ^V as an * escape character, neither ^Q or a user specified character worked. We * enforce that here, just in case someone depends on it. */ #define IS_ESCAPE(sp, cmdp, ch) \ (F_ISSET(cmdp, E_VLITONLY) ? \ (ch) == CH_LITERAL : KEY_VAL(sp, ch) == K_VLNEXT) /* * File state must be checked for each command -- any ex command may be entered * at any time, and most of them won't work well if a file hasn't yet been read * in. Historic vi generally took the easy way out and dropped core. */ #define NEEDFILE(sp, cmdp) { \ if ((sp)->ep == NULL) { \ ex_emsg(sp, (cmdp)->cmd->name, EXM_NOFILEYET); \ return (1); \ } \ } /* Range structures for global and @ commands. */ typedef struct _range RANGE; struct _range { /* Global command range. */ CIRCLEQ_ENTRY(_range) q; /* Linked list of ranges. */ recno_t start, stop; /* Start/stop of the range. */ }; /* Ex command structure. */ struct _excmd { LIST_ENTRY(_excmd) q; /* Linked list of commands. */ char *if_name; /* Associated file. */ recno_t if_lno; /* Associated line number. */ /* Clear the structure for the ex parser. */ #define CLEAR_EX_PARSER(cmdp) \ memset(&((cmdp)->cp), 0, ((char *)&(cmdp)->flags - \ (char *)&((cmdp)->cp)) + sizeof((cmdp)->flags)) char *cp; /* Current command text. */ size_t clen; /* Current command length. */ char *save_cmd; /* Remaining command. */ size_t save_cmdlen; /* Remaining command length. */ EXCMDLIST const *cmd; /* Command: entry in command table. */ EXCMDLIST rcmd; /* Command: table entry/replacement. */ CIRCLEQ_HEAD(_rh, _range) rq; /* @/global range: linked list. */ recno_t range_lno; /* @/global range: set line number. */ char *o_cp; /* Original @/global command. */ size_t o_clen; /* Original @/global command length. */ #define AGV_AT 0x01 /* @ buffer execution. */ #define AGV_AT_NORANGE 0x02 /* @ buffer execution without range. */ #define AGV_GLOBAL 0x04 /* global command. */ #define AGV_V 0x08 /* v command. */ #define AGV_ALL (AGV_AT | AGV_AT_NORANGE | AGV_GLOBAL | AGV_V) u_int8_t agv_flags; /* Clear the structure before each ex command. */ #define CLEAR_EX_CMD(cmdp) { \ u_int32_t L__f = F_ISSET(cmdp, E_PRESERVE); \ memset(&((cmdp)->buffer), 0, ((char *)&(cmdp)->flags - \ (char *)&((cmdp)->buffer)) + sizeof((cmdp)->flags)); \ F_SET(cmdp, L__f); \ } CHAR_T buffer; /* Command: named buffer. */ recno_t lineno; /* Command: line number. */ long count; /* Command: signed count. */ long flagoff; /* Command: signed flag offset. */ int addrcnt; /* Command: addresses (0, 1 or 2). */ MARK addr1; /* Command: 1st address. */ MARK addr2; /* Command: 2nd address. */ ARGS **argv; /* Command: array of arguments. */ int argc; /* Command: count of arguments. */ #define E_C_BUFFER 0x00001 /* Buffer name specified. */ #define E_C_CARAT 0x00002 /* ^ flag. */ #define E_C_COUNT 0x00004 /* Count specified. */ #define E_C_COUNT_NEG 0x00008 /* Count was signed negative. */ #define E_C_COUNT_POS 0x00010 /* Count was signed positive. */ #define E_C_DASH 0x00020 /* - flag. */ #define E_C_DOT 0x00040 /* . flag. */ #define E_C_EQUAL 0x00080 /* = flag. */ #define E_C_FORCE 0x00100 /* ! flag. */ #define E_C_HASH 0x00200 /* # flag. */ #define E_C_LIST 0x00400 /* l flag. */ #define E_C_PLUS 0x00800 /* + flag. */ #define E_C_PRINT 0x01000 /* p flag. */ u_int16_t iflags; /* User input information. */ #define __INUSE2 0x000004ff /* Same name space as EXCMDLIST. */ #define E_BLIGNORE 0x00000800 /* Ignore blank lines. */ #define E_NAMEDISCARD 0x00001000 /* Free/discard the name. */ #define E_NOAUTO 0x00002000 /* Don't do autoprint output. */ #define E_NOPRDEF 0x00004000 /* Don't print as default. */ #define E_NRSEP 0x00008000 /* Need to line adjust ex output. */ #define E_OPTNUM 0x00010000 /* Number edit option affected. */ #define E_VLITONLY 0x00020000 /* Use ^V quoting only. */ #define E_PRESERVE 0x0003f800 /* Bits to preserve across commands. */ #define E_ABSMARK 0x00040000 /* Set the absolute mark. */ #define E_ADDR_DEF 0x00080000 /* Default addresses used. */ #define E_DELTA 0x00100000 /* Search address with delta. */ #define E_MODIFY 0x00200000 /* File name expansion modified arg. */ #define E_MOVETOEND 0x00400000 /* Move to the end of the file first. */ #define E_NEWLINE 0x00800000 /* Found ending . */ #define E_SEARCH_WMSG 0x01000000 /* Display search-wrapped message. */ #define E_USELASTCMD 0x02000000 /* Use the last command. */ #define E_VISEARCH 0x04000000 /* It's really a vi search command. */ u_int32_t flags; /* Current flags. */ }; /* Ex private, per-screen memory. */ typedef struct _ex_private { CIRCLEQ_HEAD(_tqh, _tagq) tq; /* Tag queue. */ TAILQ_HEAD(_tagfh, _tagf) tagfq;/* Tag file list. */ LIST_HEAD(_csch, _csc) cscq; /* Cscope connection list. */ char *tag_last; /* Saved last tag string. */ CHAR_T *lastbcomm; /* Last bang command. */ ARGS **args; /* Command: argument list. */ int argscnt; /* Command: argument list count. */ int argsoff; /* Command: offset into arguments. */ u_int32_t fdef; /* Saved E_C_* default command flags. */ char *ibp; /* File line input buffer. */ size_t ibp_len; /* File line input buffer length. */ /* * Buffers for the ex output. The screen/vi support doesn't do any * character buffering of any kind. We do it here so that we're not * calling the screen output routines on every character. * * XXX * Change to grow dynamically. */ char obp[1024]; /* Ex output buffer. */ size_t obp_len; /* Ex output buffer length. */ #define EXP_CSCINIT 0x01 /* Cscope initialized. */ u_int8_t flags; } EX_PRIVATE; #define EXP(sp) ((EX_PRIVATE *)((sp)->ex_private)) /* * Filter actions: * * FILTER_BANG !: filter text through the utility. * FILTER_RBANG !: read from the utility (without stdin). * FILTER_READ read: read from the utility (with stdin). * FILTER_WRITE write: write to the utility, display its output. */ enum filtertype { FILTER_BANG, FILTER_RBANG, FILTER_READ, FILTER_WRITE }; /* Ex common error messages. */ typedef enum { EXM_EMPTYBUF, /* Empty buffer. */ EXM_FILECOUNT, /* Too many file names. */ EXM_NOCANON, /* No terminal interface. */ EXM_NOCANON_F, /* EXM_NOCANO: filter version. */ EXM_NOFILEYET, /* Illegal until a file read in. */ EXM_NOPREVBUF, /* No previous buffer specified. */ EXM_NOPREVRE, /* No previous RE specified. */ EXM_NOSUSPEND, /* No suspension. */ EXM_SECURE, /* Illegal if secure edit option set. */ EXM_SECURE_F, /* EXM_SECURE: filter version */ EXM_USAGE /* Standard usage message. */ } exm_t; /* Ex address error types. */ enum badaddr { A_COMBO, A_EMPTY, A_EOF, A_NOTSET, A_ZERO }; /* Ex common tag error messages. */ typedef enum { TAG_BADLNO, /* Tag line doesn't exist. */ TAG_EMPTY, /* Tags stack is empty. */ TAG_SEARCH /* Tags search pattern wasn't found. */ } tagmsg_t; #include "ex_def.h" #include "ex_extern.h" vigor-0.016.orig/ex/ex_abbrev.c0100644000076400007640000000543207103707264015015 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_abbrev.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" /* * ex_abbr -- :abbreviate [key replacement] * Create an abbreviation or display abbreviations. * * PUBLIC: int ex_abbr __P((SCR *, EXCMD *)); */ int ex_abbr(sp, cmdp) SCR *sp; EXCMD *cmdp; { CHAR_T *p; size_t len; switch (cmdp->argc) { case 0: if (seq_dump(sp, SEQ_ABBREV, 0) == 0) msgq(sp, M_INFO, "105|No abbreviations to display"); return (0); case 2: break; default: abort(); } /* * Check for illegal characters. * * !!! * Another fun one, historically. See vi/v_ntext.c:txt_abbrev() for * details. The bottom line is that all abbreviations have to end * with a "word" character, because it's the transition from word to * non-word characters that triggers the test for an abbreviation. In * addition, because of the way the test is done, there can't be any * transitions from word to non-word character (or vice-versa) other * than between the next-to-last and last characters of the string, * and there can't be any characters. Warn the user. */ if (!inword(cmdp->argv[0]->bp[cmdp->argv[0]->len - 1])) { msgq(sp, M_ERR, "106|Abbreviations must end with a \"word\" character"); return (1); } for (p = cmdp->argv[0]->bp; *p != '\0'; ++p) if (isblank(p[0])) { msgq(sp, M_ERR, "107|Abbreviations may not contain tabs or spaces"); return (1); } if (cmdp->argv[0]->len > 2) for (p = cmdp->argv[0]->bp, len = cmdp->argv[0]->len - 2; len; --len, ++p) if (inword(p[0]) != inword(p[1])) { msgq(sp, M_ERR, "108|Abbreviations may not mix word/non-word characters, except at the end"); return (1); } if (seq_set(sp, NULL, 0, cmdp->argv[0]->bp, cmdp->argv[0]->len, cmdp->argv[1]->bp, cmdp->argv[1]->len, SEQ_ABBREV, SEQ_USERDEF)) return (1); F_SET(sp->gp, G_ABBREV); return (0); } /* * ex_unabbr -- :unabbreviate key * Delete an abbreviation. * * PUBLIC: int ex_unabbr __P((SCR *, EXCMD *)); */ int ex_unabbr(sp, cmdp) SCR *sp; EXCMD *cmdp; { ARGS *ap; ap = cmdp->argv[0]; if (!F_ISSET(sp->gp, G_ABBREV) || seq_delete(sp, ap->bp, ap->len, SEQ_ABBREV)) { msgq_str(sp, M_ERR, ap->bp, "109|\"%s\" is not an abbreviation"); return (1); } return (0); } vigor-0.016.orig/ex/ex_append.c0100644000076400007640000001642607103707264015030 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_append.c 10.30 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" enum which {APPEND, CHANGE, INSERT}; static int ex_aci __P((SCR *, EXCMD *, enum which)); /* * ex_append -- :[line] a[ppend][!] * Append one or more lines of new text after the specified line, * or the current line if no address is specified. * * PUBLIC: int ex_append __P((SCR *, EXCMD *)); */ int ex_append(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (ex_aci(sp, cmdp, APPEND)); } /* * ex_change -- :[line[,line]] c[hange][!] [count] * Change one or more lines to the input text. * * PUBLIC: int ex_change __P((SCR *, EXCMD *)); */ int ex_change(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (ex_aci(sp, cmdp, CHANGE)); } /* * ex_insert -- :[line] i[nsert][!] * Insert one or more lines of new text before the specified line, * or the current line if no address is specified. * * PUBLIC: int ex_insert __P((SCR *, EXCMD *)); */ int ex_insert(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (ex_aci(sp, cmdp, INSERT)); } /* * ex_aci -- * Append, change, insert in ex. */ static int ex_aci(sp, cmdp, cmd) SCR *sp; EXCMD *cmdp; enum which cmd; { CHAR_T *p, *t; GS *gp; TEXT *tp; TEXTH tiq; recno_t cnt, lno; size_t len; u_int32_t flags; int need_newline; gp = sp->gp; NEEDFILE(sp, cmdp); /* * If doing a change, replace lines for as long as possible. Then, * append more lines or delete remaining lines. Changes to an empty * file are appends, inserts are the same as appends to the previous * line. * * !!! * Set the address to which we'll append. We set sp->lno to this * address as well so that autoindent works correctly when get text * from the user. */ lno = cmdp->addr1.lno; sp->lno = lno; if ((cmd == CHANGE || cmd == INSERT) && lno != 0) --lno; /* * !!! * If the file isn't empty, cut changes into the unnamed buffer. */ if (cmd == CHANGE && cmdp->addr1.lno != 0 && (cut(sp, NULL, &cmdp->addr1, &cmdp->addr2, CUT_LINEMODE) || del(sp, &cmdp->addr1, &cmdp->addr2, 1))) return (1); /* * !!! * Anything that was left after the command separator becomes part * of the inserted text. Apparently, it was common usage to enter: * * :g/pattern/append|stuff1 * * and append the line of text "stuff1" to the lines containing the * pattern. It was also historically legal to enter: * * :append|stuff1 * stuff2 * . * * and the text on the ex command line would be appended as well as * the text inserted after it. There was an historic bug however, * that the user had to enter *two* terminating lines (the '.' lines) * to terminate text input mode, in this case. This whole thing * could be taken too far, however. Entering: * * :append|stuff1\ * stuff2 * stuff3 * . * * i.e. mixing and matching the forms confused the historic vi, and, * not only did it take two terminating lines to terminate text input * mode, but the trailing backslashes were retained on the input. We * match historic practice except that we discard the backslashes. * * Input lines specified on the ex command line lines are separated by * s. If there is a trailing delimiter an empty line was * inserted. There may also be a leading delimiter, which is ignored * unless it's also a trailing delimiter. It is possible to encounter * a termination line, i.e. a single '.', in a global command, but not * necessary if the text insert command was the last of the global * commands. */ if (cmdp->save_cmdlen != 0) { for (p = cmdp->save_cmd, len = cmdp->save_cmdlen; len > 0; p = t) { for (t = p; len > 0 && t[0] != '\n'; ++t, --len); if (t != p || len == 0) { if (F_ISSET(sp, SC_EX_GLOBAL) && t - p == 1 && p[0] == '.') { ++t; if (len > 0) --len; break; } if (db_append(sp, 1, lno++, p, t - p)) return (1); } if (len != 0) { ++t; if (--len == 0 && db_append(sp, 1, lno++, "", 0)) return (1); } } /* * If there's any remaining text, we're in a global, and * there's more command to parse. * * !!! * We depend on the fact that non-global commands will eat the * rest of the command line as text input, and before getting * any text input from the user. Otherwise, we'd have to save * off the command text before or during the call to the text * input function below. */ if (len != 0) cmdp->save_cmd = t; cmdp->save_cmdlen = len; } if (F_ISSET(sp, SC_EX_GLOBAL)) { if ((sp->lno = lno) == 0 && db_exist(sp, 1)) sp->lno = 1; return (0); } /* * If not in a global command, read from the terminal. * * If this code is called by vi, we want to reset the terminal and use * ex's line get routine. It actually works fine if we use vi's get * routine, but it doesn't look as nice. Maybe if we had a separate * window or something, but getting a line at a time looks awkward. * However, depending on the screen that we're using, that may not * be possible. */ if (F_ISSET(sp, SC_VI)) { if (gp->scr_screen(sp, SC_EX)) { ex_emsg(sp, cmdp->cmd->name, EXM_NOCANON); return (1); } /* If we're still in the vi screen, move out explicitly. */ need_newline = !F_ISSET(sp, SC_SCR_EXWROTE); F_SET(sp, SC_SCR_EX | SC_SCR_EXWROTE); if (need_newline) (void)ex_puts(sp, "\n"); /* * !!! * Users of historical versions of vi sometimes get confused * when they enter append mode, and can't seem to get out of * it. Give them an informational message. */ (void)ex_puts(sp, msg_cat(sp, "273|Entering ex input mode.", NULL)); (void)ex_puts(sp, "\n"); (void)ex_fflush(sp); } /* * Set input flags; the ! flag turns off autoindent for append, * change and insert. */ LF_INIT(TXT_DOTTERM | TXT_NUMBER); if (!FL_ISSET(cmdp->iflags, E_C_FORCE) && O_ISSET(sp, O_AUTOINDENT)) LF_SET(TXT_AUTOINDENT); if (O_ISSET(sp, O_BEAUTIFY)) LF_SET(TXT_BEAUTIFY); /* * This code can't use the common screen TEXTH structure (sp->tiq), * as it may already be in use, e.g. ":append|s/abc/ABC/" would fail * as we are only halfway through the text when the append code fires. * Use a local structure instead. (The ex code would have to use a * local structure except that we're guaranteed to finish remaining * characters in the common TEXTH structure when they were inserted * into the file, above.) */ memset(&tiq, 0, sizeof(TEXTH)); CIRCLEQ_INIT(&tiq); if (ex_txt(sp, &tiq, 0, flags)) return (1); for (cnt = 0, tp = tiq.cqh_first; tp != (TEXT *)&tiq; ++cnt, tp = tp->q.cqe_next) if (db_append(sp, 1, lno++, tp->lb, tp->len)) return (1); /* * Set sp->lno to the final line number value (correcting for a * possible 0 value) as that's historically correct for the final * line value, whether or not the user entered any text. */ if ((sp->lno = lno) == 0 && db_exist(sp, 1)) sp->lno = 1; return (0); } vigor-0.016.orig/ex/ex_args.c0100644000076400007640000001566207103707264014516 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_args.c 10.16 (Berkeley) 7/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" static int ex_N_next __P((SCR *, EXCMD *)); /* * ex_next -- :next [+cmd] [files] * Edit the next file, optionally setting the list of files. * * !!! * The :next command behaved differently from the :rewind command in * historic vi. See nvi/docs/autowrite for details, but the basic * idea was that it ignored the force flag if the autowrite flag was * set. This implementation handles them all identically. * * PUBLIC: int ex_next __P((SCR *, EXCMD *)); */ int ex_next(sp, cmdp) SCR *sp; EXCMD *cmdp; { ARGS **argv; FREF *frp; int noargs; char **ap; /* Check for file to move to. */ if (cmdp->argc == 0 && (sp->cargv == NULL || sp->cargv[1] == NULL)) { msgq(sp, M_ERR, "111|No more files to edit"); return (1); } if (F_ISSET(cmdp, E_NEWSCREEN)) { /* By default, edit the next file in the old argument list. */ if (cmdp->argc == 0) { if (argv_exp0(sp, cmdp, sp->cargv[1], strlen(sp->cargv[1]))) return (1); return (ex_edit(sp, cmdp)); } return (ex_N_next(sp, cmdp)); } /* Check modification. */ if (file_m1(sp, FL_ISSET(cmdp->iflags, E_C_FORCE), FS_ALL | FS_POSSIBLE)) return (1); /* Any arguments are a replacement file list. */ if (cmdp->argc) { /* Free the current list. */ if (!F_ISSET(sp, SC_ARGNOFREE) && sp->argv != NULL) { for (ap = sp->argv; *ap != NULL; ++ap) free(*ap); free(sp->argv); } F_CLR(sp, SC_ARGNOFREE | SC_ARGRECOVER); sp->cargv = NULL; /* Create a new list. */ CALLOC_RET(sp, sp->argv, char **, cmdp->argc + 1, sizeof(char *)); for (ap = sp->argv, argv = cmdp->argv; argv[0]->len != 0; ++ap, ++argv) if ((*ap = v_strdup(sp, argv[0]->bp, argv[0]->len)) == NULL) return (1); *ap = NULL; /* Switch to the first file. */ sp->cargv = sp->argv; if ((frp = file_add(sp, *sp->cargv)) == NULL) return (1); noargs = 0; /* Display a file count with the welcome message. */ F_SET(sp, SC_STATUS_CNT); } else { if ((frp = file_add(sp, sp->cargv[1])) == NULL) return (1); if (F_ISSET(sp, SC_ARGRECOVER)) F_SET(frp, FR_RECOVER); noargs = 1; } if (file_init(sp, frp, NULL, FS_SETALT | (FL_ISSET(cmdp->iflags, E_C_FORCE) ? FS_FORCE : 0))) return (1); if (noargs) ++sp->cargv; F_SET(sp, SC_FSWITCH); return (0); } /* * ex_N_next -- * New screen version of ex_next. */ static int ex_N_next(sp, cmdp) SCR *sp; EXCMD *cmdp; { SCR *new; FREF *frp; /* Get a new screen. */ if (screen_init(sp->gp, sp, &new)) return (1); if (vs_split(sp, new, 0)) { (void)screen_end(new); return (1); } /* Get a backing file. */ if ((frp = file_add(new, cmdp->argv[0]->bp)) == NULL || file_init(new, frp, NULL, (FL_ISSET(cmdp->iflags, E_C_FORCE) ? FS_FORCE : 0))) { (void)vs_discard(new, NULL); (void)screen_end(new); return (1); } /* The arguments are a replacement file list. */ new->cargv = new->argv = ex_buildargv(sp, cmdp, NULL); /* Display a file count with the welcome message. */ F_SET(new, SC_STATUS_CNT); /* Set up the switch. */ sp->nextdisp = new; F_SET(sp, SC_SSWITCH); return (0); } /* * ex_prev -- :prev * Edit the previous file. * * PUBLIC: int ex_prev __P((SCR *, EXCMD *)); */ int ex_prev(sp, cmdp) SCR *sp; EXCMD *cmdp; { FREF *frp; if (sp->cargv == sp->argv) { msgq(sp, M_ERR, "112|No previous files to edit"); return (1); } if (F_ISSET(cmdp, E_NEWSCREEN)) { if (argv_exp0(sp, cmdp, sp->cargv[-1], strlen(sp->cargv[-1]))) return (1); return (ex_edit(sp, cmdp)); } if (file_m1(sp, FL_ISSET(cmdp->iflags, E_C_FORCE), FS_ALL | FS_POSSIBLE)) return (1); if ((frp = file_add(sp, sp->cargv[-1])) == NULL) return (1); if (file_init(sp, frp, NULL, FS_SETALT | (FL_ISSET(cmdp->iflags, E_C_FORCE) ? FS_FORCE : 0))) return (1); --sp->cargv; F_SET(sp, SC_FSWITCH); return (0); } /* * ex_rew -- :rew * Re-edit the list of files. * * !!! * Historic practice was that all files would start editing at the beginning * of the file. We don't get this right because we may have multiple screens * and we can't clear the FR_CURSORSET bit for a single screen. I don't see * anyone noticing, but if they do, we'll have to put information into the SCR * structure so we can keep track of it. * * PUBLIC: int ex_rew __P((SCR *, EXCMD *)); */ int ex_rew(sp, cmdp) SCR *sp; EXCMD *cmdp; { FREF *frp; /* * !!! * Historic practice -- you can rewind to the current file. */ if (sp->argv == NULL) { msgq(sp, M_ERR, "113|No previous files to rewind"); return (1); } if (file_m1(sp, FL_ISSET(cmdp->iflags, E_C_FORCE), FS_ALL | FS_POSSIBLE)) return (1); /* Switch to the first one. */ sp->cargv = sp->argv; if ((frp = file_add(sp, *sp->cargv)) == NULL) return (1); if (file_init(sp, frp, NULL, FS_SETALT | (FL_ISSET(cmdp->iflags, E_C_FORCE) ? FS_FORCE : 0))) return (1); /* Switch and display a file count with the welcome message. */ F_SET(sp, SC_FSWITCH | SC_STATUS_CNT); return (0); } /* * ex_args -- :args * Display the list of files. * * PUBLIC: int ex_args __P((SCR *, EXCMD *)); */ int ex_args(sp, cmdp) SCR *sp; EXCMD *cmdp; { GS *gp; int cnt, col, len, sep; char **ap; if (sp->argv == NULL) { (void)msgq(sp, M_ERR, "114|No file list to display"); return (0); } gp = sp->gp; col = len = sep = 0; for (cnt = 1, ap = sp->argv; *ap != NULL; ++ap) { col += len = strlen(*ap) + sep + (ap == sp->cargv ? 2 : 0); if (col >= sp->cols - 1) { col = len; sep = 0; (void)ex_puts(sp, "\n"); } else if (cnt != 1) { sep = 1; (void)ex_puts(sp, " "); } ++cnt; (void)ex_printf(sp, "%s%s%s", ap == sp->cargv ? "[" : "", *ap, ap == sp->cargv ? "]" : ""); if (INTERRUPTED(sp)) break; } (void)ex_puts(sp, "\n"); return (0); } /* * ex_buildargv -- * Build a new file argument list. * * PUBLIC: char **ex_buildargv __P((SCR *, EXCMD *, char *)); */ char ** ex_buildargv(sp, cmdp, name) SCR *sp; EXCMD *cmdp; char *name; { ARGS **argv; int argc; char **ap, **s_argv; argc = cmdp == NULL ? 1 : cmdp->argc; CALLOC(sp, s_argv, char **, argc + 1, sizeof(char *)); if ((ap = s_argv) == NULL) return (NULL); if (cmdp == NULL) { if ((*ap = v_strdup(sp, name, strlen(name))) == NULL) return (NULL); ++ap; } else for (argv = cmdp->argv; argv[0]->len != 0; ++ap, ++argv) if ((*ap = v_strdup(sp, argv[0]->bp, argv[0]->len)) == NULL) return (NULL); *ap = NULL; return (s_argv); } vigor-0.016.orig/ex/ex_argv.c0100644000076400007640000004126207103707264014514 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_argv.c 10.26 (Berkeley) 9/20/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" static int argv_alloc __P((SCR *, size_t)); static int argv_comp __P((const void *, const void *)); static int argv_fexp __P((SCR *, EXCMD *, char *, size_t, char *, size_t *, char **, size_t *, int)); static int argv_lexp __P((SCR *, EXCMD *, char *)); static int argv_sexp __P((SCR *, char **, size_t *, size_t *)); /* * argv_init -- * Build a prototype arguments list. * * PUBLIC: int argv_init __P((SCR *, EXCMD *)); */ int argv_init(sp, excp) SCR *sp; EXCMD *excp; { EX_PRIVATE *exp; exp = EXP(sp); exp->argsoff = 0; argv_alloc(sp, 1); excp->argv = exp->args; excp->argc = exp->argsoff; return (0); } /* * argv_exp0 -- * Append a string to the argument list. * * PUBLIC: int argv_exp0 __P((SCR *, EXCMD *, char *, size_t)); */ int argv_exp0(sp, excp, cmd, cmdlen) SCR *sp; EXCMD *excp; char *cmd; size_t cmdlen; { EX_PRIVATE *exp; exp = EXP(sp); argv_alloc(sp, cmdlen); memcpy(exp->args[exp->argsoff]->bp, cmd, cmdlen); exp->args[exp->argsoff]->bp[cmdlen] = '\0'; exp->args[exp->argsoff]->len = cmdlen; ++exp->argsoff; excp->argv = exp->args; excp->argc = exp->argsoff; return (0); } /* * argv_exp1 -- * Do file name expansion on a string, and append it to the * argument list. * * PUBLIC: int argv_exp1 __P((SCR *, EXCMD *, char *, size_t, int)); */ int argv_exp1(sp, excp, cmd, cmdlen, is_bang) SCR *sp; EXCMD *excp; char *cmd; size_t cmdlen; int is_bang; { EX_PRIVATE *exp; size_t blen, len; char *bp, *p, *t; GET_SPACE_RET(sp, bp, blen, 512); len = 0; exp = EXP(sp); if (argv_fexp(sp, excp, cmd, cmdlen, bp, &len, &bp, &blen, is_bang)) { FREE_SPACE(sp, bp, blen); return (1); } /* If it's empty, we're done. */ if (len != 0) { for (p = bp, t = bp + len; p < t; ++p) if (!isblank(*p)) break; if (p == t) goto ret; } else goto ret; (void)argv_exp0(sp, excp, bp, len); ret: FREE_SPACE(sp, bp, blen); return (0); } /* * argv_exp2 -- * Do file name and shell expansion on a string, and append it to * the argument list. * * PUBLIC: int argv_exp2 __P((SCR *, EXCMD *, char *, size_t)); */ int argv_exp2(sp, excp, cmd, cmdlen) SCR *sp; EXCMD *excp; char *cmd; size_t cmdlen; { size_t blen, len, n; int rval; char *bp, *mp, *p; GET_SPACE_RET(sp, bp, blen, 512); #define SHELLECHO "echo " #define SHELLOFFSET (sizeof(SHELLECHO) - 1) memcpy(bp, SHELLECHO, SHELLOFFSET); p = bp + SHELLOFFSET; len = SHELLOFFSET; #if defined(DEBUG) && 0 TRACE(sp, "file_argv: {%.*s}\n", (int)cmdlen, cmd); #endif if (argv_fexp(sp, excp, cmd, cmdlen, p, &len, &bp, &blen, 0)) { rval = 1; goto err; } #if defined(DEBUG) && 0 TRACE(sp, "before shell: %d: {%s}\n", len, bp); #endif /* * Do shell word expansion -- it's very, very hard to figure out what * magic characters the user's shell expects. Historically, it was a * union of v7 shell and csh meta characters. We match that practice * by default, so ":read \%" tries to read a file named '%'. It would * make more sense to pass any special characters through the shell, * but then, if your shell was csh, the above example will behave * differently in nvi than in vi. If you want to get other characters * passed through to your shell, change the "meta" option. * * To avoid a function call per character, we do a first pass through * the meta characters looking for characters that aren't expected * to be there, and then we can ignore them in the user's argument. */ if (opts_empty(sp, O_SHELL, 1) || opts_empty(sp, O_SHELLMETA, 1)) n = 0; else { for (p = mp = O_STR(sp, O_SHELLMETA); *p != '\0'; ++p) if (isblank(*p) || isalnum(*p)) break; p = bp + SHELLOFFSET; n = len - SHELLOFFSET; if (*p != '\0') { for (; n > 0; --n, ++p) if (strchr(mp, *p) != NULL) break; } else for (; n > 0; --n, ++p) if (!isblank(*p) && !isalnum(*p) && strchr(mp, *p) != NULL) break; } /* * If we found a meta character in the string, fork a shell to expand * it. Unfortunately, this is comparatively slow. Historically, it * didn't matter much, since users don't enter meta characters as part * of pathnames that frequently. The addition of filename completion * broke that assumption because it's easy to use. As a result, lots * folks have complained that the expansion code is too slow. So, we * detect filename completion as a special case, and do it internally. * Note that this code assumes that the character is the * match-anything meta character. That feels safe -- if anyone writes * a shell that doesn't follow that convention, I'd suggest giving them * a festive hot-lead enema. */ switch (n) { case 0: p = bp + SHELLOFFSET; len -= SHELLOFFSET; rval = argv_exp3(sp, excp, p, len); break; case 1: if (*p == '*') { *p = '\0'; rval = argv_lexp(sp, excp, bp + SHELLOFFSET); break; } /* FALLTHROUGH */ default: if (argv_sexp(sp, &bp, &blen, &len)) { rval = 1; goto err; } p = bp; rval = argv_exp3(sp, excp, p, len); break; } err: FREE_SPACE(sp, bp, blen); return (rval); } /* * argv_exp3 -- * Take a string and break it up into an argv, which is appended * to the argument list. * * PUBLIC: int argv_exp3 __P((SCR *, EXCMD *, char *, size_t)); */ int argv_exp3(sp, excp, cmd, cmdlen) SCR *sp; EXCMD *excp; char *cmd; size_t cmdlen; { EX_PRIVATE *exp; size_t len; int ch, off; char *ap, *p; for (exp = EXP(sp); cmdlen > 0; ++exp->argsoff) { /* Skip any leading whitespace. */ for (; cmdlen > 0; --cmdlen, ++cmd) { ch = *cmd; if (!isblank(ch)) break; } if (cmdlen == 0) break; /* * Determine the length of this whitespace delimited * argument. * * QUOTING NOTE: * * Skip any character preceded by the user's quoting * character. */ for (ap = cmd, len = 0; cmdlen > 0; ++cmd, --cmdlen, ++len) { ch = *cmd; if (IS_ESCAPE(sp, excp, ch) && cmdlen > 1) { ++cmd; --cmdlen; } else if (isblank(ch)) break; } /* * Copy the argument into place. * * QUOTING NOTE: * * Lose quote chars. */ argv_alloc(sp, len); off = exp->argsoff; exp->args[off]->len = len; for (p = exp->args[off]->bp; len > 0; --len, *p++ = *ap++) if (IS_ESCAPE(sp, excp, *ap)) ++ap; *p = '\0'; } excp->argv = exp->args; excp->argc = exp->argsoff; #if defined(DEBUG) && 0 for (cnt = 0; cnt < exp->argsoff; ++cnt) TRACE(sp, "arg %d: {%s}\n", cnt, exp->argv[cnt]); #endif return (0); } /* * argv_fexp -- * Do file name and bang command expansion. */ static int argv_fexp(sp, excp, cmd, cmdlen, p, lenp, bpp, blenp, is_bang) SCR *sp; EXCMD *excp; char *cmd, *p, **bpp; size_t cmdlen, *lenp, *blenp; int is_bang; { EX_PRIVATE *exp; char *bp, *t; size_t blen, len, off, tlen; /* Replace file name characters. */ for (bp = *bpp, blen = *blenp, len = *lenp; cmdlen > 0; --cmdlen, ++cmd) switch (*cmd) { case '!': if (!is_bang) goto ins_ch; exp = EXP(sp); if (exp->lastbcomm == NULL) { msgq(sp, M_ERR, "115|No previous command to replace \"!\""); return (1); } len += tlen = strlen(exp->lastbcomm); off = p - bp; ADD_SPACE_RET(sp, bp, blen, len); p = bp + off; memcpy(p, exp->lastbcomm, tlen); p += tlen; F_SET(excp, E_MODIFY); break; case '%': if ((t = sp->frp->name) == NULL) { msgq(sp, M_ERR, "116|No filename to substitute for %%"); return (1); } tlen = strlen(t); len += tlen; off = p - bp; ADD_SPACE_RET(sp, bp, blen, len); p = bp + off; memcpy(p, t, tlen); p += tlen; F_SET(excp, E_MODIFY); break; case '#': if ((t = sp->alt_name) == NULL) { msgq(sp, M_ERR, "117|No filename to substitute for #"); return (1); } len += tlen = strlen(t); off = p - bp; ADD_SPACE_RET(sp, bp, blen, len); p = bp + off; memcpy(p, t, tlen); p += tlen; F_SET(excp, E_MODIFY); break; case '\\': /* * QUOTING NOTE: * * Strip any backslashes that protected the file * expansion characters. */ if (cmdlen > 1 && (cmd[1] == '%' || cmd[1] == '#' || cmd[1] == '!')) { ++cmd; --cmdlen; } /* FALLTHROUGH */ default: ins_ch: ++len; off = p - bp; ADD_SPACE_RET(sp, bp, blen, len); p = bp + off; *p++ = *cmd; } /* Nul termination. */ ++len; off = p - bp; ADD_SPACE_RET(sp, bp, blen, len); p = bp + off; *p = '\0'; /* Return the new string length, buffer, buffer length. */ *lenp = len - 1; *bpp = bp; *blenp = blen; return (0); } /* * argv_alloc -- * Make more space for arguments. */ static int argv_alloc(sp, len) SCR *sp; size_t len; { ARGS *ap; EX_PRIVATE *exp; int cnt, off; /* * Allocate room for another argument, always leaving * enough room for an ARGS structure with a length of 0. */ #define INCREMENT 20 exp = EXP(sp); off = exp->argsoff; if (exp->argscnt == 0 || off + 2 >= exp->argscnt - 1) { cnt = exp->argscnt + INCREMENT; REALLOC(sp, exp->args, ARGS **, cnt * sizeof(ARGS *)); if (exp->args == NULL) { (void)argv_free(sp); goto mem; } memset(&exp->args[exp->argscnt], 0, INCREMENT * sizeof(ARGS *)); exp->argscnt = cnt; } /* First argument. */ if (exp->args[off] == NULL) { CALLOC(sp, exp->args[off], ARGS *, 1, sizeof(ARGS)); if (exp->args[off] == NULL) goto mem; } /* First argument buffer. */ ap = exp->args[off]; ap->len = 0; if (ap->blen < len + 1) { ap->blen = len + 1; REALLOC(sp, ap->bp, CHAR_T *, ap->blen * sizeof(CHAR_T)); if (ap->bp == NULL) { ap->bp = NULL; ap->blen = 0; F_CLR(ap, A_ALLOCATED); mem: msgq(sp, M_SYSERR, NULL); return (1); } F_SET(ap, A_ALLOCATED); } /* Second argument. */ if (exp->args[++off] == NULL) { CALLOC(sp, exp->args[off], ARGS *, 1, sizeof(ARGS)); if (exp->args[off] == NULL) goto mem; } /* 0 length serves as end-of-argument marker. */ exp->args[off]->len = 0; return (0); } /* * argv_free -- * Free up argument structures. * * PUBLIC: int argv_free __P((SCR *)); */ int argv_free(sp) SCR *sp; { EX_PRIVATE *exp; int off; exp = EXP(sp); if (exp->args != NULL) { for (off = 0; off < exp->argscnt; ++off) { if (exp->args[off] == NULL) continue; if (F_ISSET(exp->args[off], A_ALLOCATED)) free(exp->args[off]->bp); free(exp->args[off]); } free(exp->args); } exp->args = NULL; exp->argscnt = 0; exp->argsoff = 0; return (0); } /* * argv_lexp -- * Find all file names matching the prefix and append them to the * buffer. */ static int argv_lexp(sp, excp, path) SCR *sp; EXCMD *excp; char *path; { struct dirent *dp; DIR *dirp; EX_PRIVATE *exp; int off; size_t dlen, len, nlen; char *dname, *name, *p; exp = EXP(sp); /* Set up the name and length for comparison. */ if ((p = strrchr(path, '/')) == NULL) { dname = "."; dlen = 0; name = path; } else { if (p == path) { dname = "/"; dlen = 1; } else { *p = '\0'; dname = path; dlen = strlen(path); } name = p + 1; } nlen = strlen(name); /* * XXX * We don't use the d_namlen field, it's not portable enough; we * assume that d_name is nul terminated, instead. */ if ((dirp = opendir(dname)) == NULL) { msgq_str(sp, M_SYSERR, dname, "%s"); return (1); } for (off = exp->argsoff; (dp = readdir(dirp)) != NULL;) { if (nlen == 0) { if (dp->d_name[0] == '.') continue; len = strlen(dp->d_name); } else { len = strlen(dp->d_name); if (len < nlen || memcmp(dp->d_name, name, nlen)) continue; } /* Directory + name + slash + null. */ argv_alloc(sp, dlen + len + 2); p = exp->args[exp->argsoff]->bp; if (dlen != 0) { memcpy(p, dname, dlen); p += dlen; if (dlen > 1 || dname[0] != '/') *p++ = '/'; } memcpy(p, dp->d_name, len + 1); exp->args[exp->argsoff]->len = dlen + len + 1; ++exp->argsoff; excp->argv = exp->args; excp->argc = exp->argsoff; } closedir(dirp); if (off == exp->argsoff) { /* * If we didn't find a match, complain that the expansion * failed. We can't know for certain that's the error, but * it's a good guess, and it matches historic practice. */ msgq(sp, M_ERR, "304|Shell expansion failed"); return (1); } qsort(exp->args + off, exp->argsoff - off, sizeof(ARGS *), argv_comp); return (0); } /* * argv_comp -- * Alphabetic comparison. */ static int argv_comp(a, b) const void *a, *b; { return (strcmp((char *)(*(ARGS **)a)->bp, (char *)(*(ARGS **)b)->bp)); } /* * argv_sexp -- * Fork a shell, pipe a command through it, and read the output into * a buffer. */ static int argv_sexp(sp, bpp, blenp, lenp) SCR *sp; char **bpp; size_t *blenp, *lenp; { enum { SEXP_ERR, SEXP_EXPANSION_ERR, SEXP_OK } rval; FILE *ifp; pid_t pid; size_t blen, len; int ch, std_output[2]; char *bp, *p, *sh, *sh_path; /* Secure means no shell access. */ if (O_ISSET(sp, O_SECURE)) { msgq(sp, M_ERR, "289|Shell expansions not supported when the secure edit option is set"); return (1); } sh_path = O_STR(sp, O_SHELL); if ((sh = strrchr(sh_path, '/')) == NULL) sh = sh_path; else ++sh; /* Local copies of the buffer variables. */ bp = *bpp; blen = *blenp; /* * There are two different processes running through this code, named * the utility (the shell) and the parent. The utility reads standard * input and writes standard output and standard error output. The * parent writes to the utility, reads its standard output and ignores * its standard error output. Historically, the standard error output * was discarded by vi, as it produces a lot of noise when file patterns * don't match. * * The parent reads std_output[0], and the utility writes std_output[1]. */ ifp = NULL; std_output[0] = std_output[1] = -1; if (pipe(std_output) < 0) { msgq(sp, M_SYSERR, "pipe"); return (1); } if ((ifp = fdopen(std_output[0], "r")) == NULL) { msgq(sp, M_SYSERR, "fdopen"); goto err; } /* * Do the minimal amount of work possible, the shell is going to run * briefly and then exit. We sincerely hope. */ switch (pid = vfork()) { case -1: /* Error. */ msgq(sp, M_SYSERR, "vfork"); err: if (ifp != NULL) (void)fclose(ifp); else if (std_output[0] != -1) close(std_output[0]); if (std_output[1] != -1) close(std_output[0]); return (1); case 0: /* Utility. */ /* Redirect stdout to the write end of the pipe. */ (void)dup2(std_output[1], STDOUT_FILENO); /* Close the utility's file descriptors. */ (void)close(std_output[0]); (void)close(std_output[1]); (void)close(STDERR_FILENO); /* * XXX * Assume that all shells have -c. */ execl(sh_path, sh, "-c", bp, NULL); msgq_str(sp, M_SYSERR, sh_path, "118|Error: execl: %s"); _exit(127); default: /* Parent. */ /* Close the pipe ends the parent won't use. */ (void)close(std_output[1]); break; } /* * Copy process standard output into a buffer. * * !!! * Historic vi apparently discarded leading \n and \r's from * the shell output stream. We don't on the grounds that any * shell that does that is broken. */ for (p = bp, len = 0, ch = EOF; (ch = getc(ifp)) != EOF; *p++ = ch, --blen, ++len) if (blen < 5) { ADD_SPACE_GOTO(sp, bp, *blenp, *blenp * 2); p = bp + len; blen = *blenp - len; } /* Delete the final newline, nul terminate the string. */ if (p > bp && (p[-1] == '\n' || p[-1] == '\r')) { --p; --len; } *p = '\0'; *lenp = len; *bpp = bp; /* *blenp is already updated. */ if (ferror(ifp)) goto ioerr; if (fclose(ifp)) { ioerr: msgq_str(sp, M_ERR, sh, "119|I/O error: %s"); alloc_err: rval = SEXP_ERR; } else rval = SEXP_OK; /* * Wait for the process. If the shell process fails (e.g., "echo $q" * where q wasn't a defined variable) or if the returned string has * no characters or only blank characters, (e.g., "echo $5"), complain * that the shell expansion failed. We can't know for certain that's * the error, but it's a good guess, and it matches historic practice. * This won't catch "echo foo_$5", but that's not a common error and * historic vi didn't catch it either. */ if (proc_wait(sp, (long)pid, sh, 1, 0)) rval = SEXP_EXPANSION_ERR; for (p = bp; len; ++p, --len) if (!isblank(*p)) break; if (len == 0) rval = SEXP_EXPANSION_ERR; if (rval == SEXP_EXPANSION_ERR) msgq(sp, M_ERR, "304|Shell expansion failed"); return (rval == SEXP_OK ? 0 : 1); } vigor-0.016.orig/ex/ex_at.c0100644000076400007640000000650707103707264014164 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_at.c 10.12 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_at -- :@[@ | buffer] * :*[* | buffer] * * Execute the contents of the buffer. * * PUBLIC: int ex_at __P((SCR *, EXCMD *)); */ int ex_at(sp, cmdp) SCR *sp; EXCMD *cmdp; { CB *cbp; CHAR_T name; EXCMD *ecp; RANGE *rp; TEXT *tp; size_t len; char *p; /* * !!! * Historically, [@*] and [@*][@*] executed the most * recently executed buffer in ex mode. */ name = FL_ISSET(cmdp->iflags, E_C_BUFFER) ? cmdp->buffer : '@'; if (name == '@' || name == '*') { if (!F_ISSET(sp, SC_AT_SET)) { ex_emsg(sp, NULL, EXM_NOPREVBUF); return (1); } name = sp->at_lbuf; } sp->at_lbuf = name; F_SET(sp, SC_AT_SET); CBNAME(sp, cbp, name); if (cbp == NULL) { ex_emsg(sp, KEY_NAME(sp, name), EXM_EMPTYBUF); return (1); } /* * !!! * Historically the @ command took a range of lines, and the @ buffer * was executed once per line. The historic vi could be trashed by * this because it didn't notice if the underlying file changed, or, * for that matter, if there were no more lines on which to operate. * For example, take a 10 line file, load "%delete" into a buffer, * and enter :8,10@. * * The solution is a bit tricky. If the user specifies a range, take * the same approach as for global commands, and discard the command * if exit or switch to a new file/screen. If the user doesn't specify * the range, continue to execute after a file/screen switch, which * means @ buffers are still useful in a multi-screen environment. */ CALLOC_RET(sp, ecp, EXCMD *, 1, sizeof(EXCMD)); CIRCLEQ_INIT(&ecp->rq); CALLOC_RET(sp, rp, RANGE *, 1, sizeof(RANGE)); rp->start = cmdp->addr1.lno; if (F_ISSET(cmdp, E_ADDR_DEF)) { rp->stop = rp->start; FL_SET(ecp->agv_flags, AGV_AT_NORANGE); } else { rp->stop = cmdp->addr2.lno; FL_SET(ecp->agv_flags, AGV_AT); } CIRCLEQ_INSERT_HEAD(&ecp->rq, rp, q); /* * Buffers executed in ex mode or from the colon command line in vi * were ex commands. We can't push it on the terminal queue, since * it has to be executed immediately, and we may be in the middle of * an ex command already. Push the command on the ex command stack. * Build two copies of the command. We need two copies because the * ex parser may step on the command string when it's parsing it. */ for (len = 0, tp = cbp->textq.cqh_last; tp != (void *)&cbp->textq; tp = tp->q.cqe_prev) len += tp->len + 1; MALLOC_RET(sp, ecp->cp, char *, len * 2); ecp->o_cp = ecp->cp; ecp->o_clen = len; ecp->cp[len] = '\0'; /* Copy the buffer into the command space. */ for (p = ecp->cp + len, tp = cbp->textq.cqh_last; tp != (void *)&cbp->textq; tp = tp->q.cqe_prev) { memcpy(p, tp->lb, tp->len); p += tp->len; *p++ = '\n'; } LIST_INSERT_HEAD(&sp->gp->ecq, ecp, q); return (0); } vigor-0.016.orig/ex/ex_bang.c0100644000076400007640000001234407103707264014463 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_bang.c 10.33 (Berkeley) 9/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" /* * ex_bang -- :[line [,line]] ! command * * Pass the rest of the line after the ! character to the program named by * the O_SHELL option. * * Historical vi did NOT do shell expansion on the arguments before passing * them, only file name expansion. This means that the O_SHELL program got * "$t" as an argument if that is what the user entered. Also, there's a * special expansion done for the bang command. Any exclamation points in * the user's argument are replaced by the last, expanded ! command. * * There's some fairly amazing slop in this routine to make the different * ways of getting here display the right things. It took a long time to * get it right (wrong?), so be careful. * * PUBLIC: int ex_bang __P((SCR *, EXCMD *)); */ int ex_bang(sp, cmdp) SCR *sp; EXCMD *cmdp; { enum filtertype ftype; ARGS *ap; EX_PRIVATE *exp; MARK rm; recno_t lno; int rval; const char *msg; ap = cmdp->argv[0]; if (ap->len == 0) { ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } /* Set the "last bang command" remembered value. */ exp = EXP(sp); if (exp->lastbcomm != NULL) free(exp->lastbcomm); if ((exp->lastbcomm = strdup(ap->bp)) == NULL) { msgq(sp, M_SYSERR, NULL); return (1); } /* * If the command was modified by the expansion, it was historically * redisplayed. */ if (F_ISSET(cmdp, E_MODIFY) && !F_ISSET(sp, SC_EX_SILENT)) { /* * Display the command if modified. Historic ex/vi displayed * the command if it was modified due to file name and/or bang * expansion. If piping lines in vi, it would be immediately * overwritten by any error or line change reporting. */ if (F_ISSET(sp, SC_VI)) vs_update(sp, "!", ap->bp); else { (void)ex_printf(sp, "!%s\n", ap->bp); (void)ex_fflush(sp); } } /* * If no addresses were specified, run the command. If there's an * underlying file, it's been modified and autowrite is set, write * the file back. If the file has been modified, autowrite is not * set and the warn option is set, tell the user about the file. */ if (cmdp->addrcnt == 0) { msg = NULL; if (sp->ep != NULL && F_ISSET(sp->ep, F_MODIFIED)) if (O_ISSET(sp, O_AUTOWRITE)) { if (file_aw(sp, FS_ALL)) return (0); } else if (O_ISSET(sp, O_WARN) && !F_ISSET(sp, SC_EX_SILENT)) msg = msg_cat(sp, "303|File modified since last write.", NULL); /* If we're still in a vi screen, move out explicitly. */ (void)ex_exec_proc(sp, cmdp, ap->bp, msg, !F_ISSET(sp, SC_EX | SC_SCR_EXWROTE)); } /* * If addresses were specified, pipe lines from the file through the * command. * * Historically, vi lines were replaced by both the stdout and stderr * lines of the command, but ex lines by only the stdout lines. This * makes no sense to me, so nvi makes it consistent for both, and * matches vi's historic behavior. */ else { NEEDFILE(sp, cmdp); /* Autoprint is set historically, even if the command fails. */ F_SET(cmdp, E_AUTOPRINT); /* * !!! * Historical vi permitted "!!" in an empty file. When this * happens, we arrive here with two addresses of 1,1 and a * bad attitude. The simple solution is to turn it into a * FILTER_READ operation, with the exception that stdin isn't * opened for the utility, and the cursor position isn't the * same. The only historic glitch (I think) is that we don't * put an empty line into the default cut buffer, as historic * vi did. Imagine, if you can, my disappointment. */ ftype = FILTER_BANG; if (cmdp->addr1.lno == 1 && cmdp->addr2.lno == 1) { if (db_last(sp, &lno)) return (1); if (lno == 0) { cmdp->addr1.lno = cmdp->addr2.lno = 0; ftype = FILTER_RBANG; } } rval = ex_filter(sp, cmdp, &cmdp->addr1, &cmdp->addr2, &rm, ap->bp, ftype); /* * If in vi mode, move to the first nonblank. * * !!! * Historic vi wasn't consistent in this area -- if you used * a forward motion it moved to the first nonblank, but if you * did a backward motion it didn't. And, if you followed a * backward motion with a forward motion, it wouldn't move to * the nonblank for either. Going to the nonblank generally * seems more useful and consistent, so we do it. */ sp->lno = rm.lno; if (F_ISSET(sp, SC_VI)) { sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); } else sp->cno = rm.cno; } /* Ex terminates with a bang, even if the command fails. */ if (!F_ISSET(sp, SC_VI) && !F_ISSET(sp, SC_EX_SILENT)) (void)ex_puts(sp, "!\n"); /* * XXX * The ! commands never return an error, so that autoprint always * happens in the ex parser. */ return (0); } vigor-0.016.orig/ex/ex_cd.c0100644000076400007640000000612707103707264014144 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_cd.c 10.10 (Berkeley) 8/12/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_cd -- :cd[!] [directory] * Change directories. * * PUBLIC: int ex_cd __P((SCR *, EXCMD *)); */ int ex_cd(sp, cmdp) SCR *sp; EXCMD *cmdp; { struct passwd *pw; ARGS *ap; CHAR_T savech; char *dir, *p, *t; /* XXX: END OF THE STACK, DON'T TRUST GETCWD. */ char buf[MAXPATHLEN * 2]; /* * !!! * Historic practice is that the cd isn't attempted if the file has * been modified, unless its name begins with a leading '/' or the * force flag is set. */ if (F_ISSET(sp->ep, F_MODIFIED) && !FL_ISSET(cmdp->iflags, E_C_FORCE) && sp->frp->name[0] != '/') { msgq(sp, M_ERR, "120|File modified since last complete write; write or use ! to override"); return (1); } switch (cmdp->argc) { case 0: /* If no argument, change to the user's home directory. */ if ((dir = getenv("HOME")) == NULL) { if ((pw = getpwuid(getuid())) == NULL || pw->pw_dir == NULL || pw->pw_dir[0] == '\0') { msgq(sp, M_ERR, "121|Unable to find home directory location"); return (1); } dir = pw->pw_dir; } break; case 1: dir = cmdp->argv[0]->bp; break; default: abort(); } /* * Try the current directory first. If this succeeds, don't display * a message, vi didn't historically, and it should be obvious to the * user where they are. */ if (!chdir(dir)) return (0); /* * If moving to the user's home directory, or, the path begins with * "/", "./" or "../", it's the only place we try. */ if (cmdp->argc == 0 || (ap = cmdp->argv[0])->bp[0] == '/' || ap->len == 1 && ap->bp[0] == '.' || ap->len >= 2 && ap->bp[0] == '.' && ap->bp[1] == '.' && (ap->bp[2] == '/' || ap->bp[2] == '\0')) goto err; /* Try the O_CDPATH option values. */ for (p = t = O_STR(sp, O_CDPATH);; ++p) if (*p == '\0' || *p == ':') { /* * Empty strings specify ".". The only way to get an * empty string is a leading colon, colons in a row, * or a trailing colon. Or, to put it the other way, * if the length is 1 or less, then we're dealing with * ":XXX", "XXX::XXXX" , "XXX:", or "". Since we've * already tried dot, we ignore tham all. */ if (t < p - 1) { savech = *p; *p = '\0'; (void)snprintf(buf, sizeof(buf), "%s/%s", t, dir); *p = savech; if (!chdir(buf)) { if (getcwd(buf, sizeof(buf)) != NULL) msgq_str(sp, M_INFO, buf, "122|New current directory: %s"); return (0); } } t = p + 1; if (*p == '\0') break; } err: msgq_str(sp, M_SYSERR, dir, "%s"); return (1); } vigor-0.016.orig/ex/ex_cmd.c0100644000076400007640000002764607103707264014332 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_cmd.c 10.20 (Berkeley) 10/10/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" /* * This array maps ex command names to command functions. * * The order in which command names are listed below is important -- * ambiguous abbreviations are resolved to be the first possible match, * e.g. "r" means "read", not "rewind", because "read" is listed before * "rewind". * * The syntax of the ex commands is unbelievably irregular, and a special * case from beginning to end. Each command has an associated "syntax * script" which describes the "arguments" that are possible. The script * syntax is as follows: * * ! -- ! flag * 1 -- flags: [+-]*[pl#][+-]* * 2 -- flags: [-.+^] * 3 -- flags: [-.+^=] * b -- buffer * c[01+a] -- count (0-N, 1-N, signed 1-N, address offset) * f[N#][or] -- file (a number or N, optional or required) * l -- line * S -- string with file name expansion * s -- string * W -- word string * w[N#][or] -- word (a number or N, optional or required) */ EXCMDLIST const cmds[] = { /* C_SCROLL */ {"\004", ex_pr, E_ADDR2, "", "^D", "scroll lines"}, /* C_BANG */ {"!", ex_bang, E_ADDR2_NONE | E_SECURE, "S", "[line [,line]] ! command", "filter lines through commands or run commands"}, /* C_HASH */ {"#", ex_number, E_ADDR2|E_CLRFLAG, "ca1", "[line [,line]] # [count] [l]", "display numbered lines"}, /* C_SUBAGAIN */ {"&", ex_subagain, E_ADDR2, "s", "[line [,line]] & [cgr] [count] [#lp]", "repeat the last subsitution"}, /* C_STAR */ {"*", ex_at, 0, "b", "* [buffer]", "execute a buffer"}, /* C_SHIFTL */ {"<", ex_shiftl, E_ADDR2|E_AUTOPRINT, "ca1", "[line [,line]] <[<...] [count] [flags]", "shift lines left"}, /* C_EQUAL */ {"=", ex_equal, E_ADDR1|E_ADDR_ZERO|E_ADDR_ZERODEF, "1", "[line] = [flags]", "display line number"}, /* C_SHIFTR */ {">", ex_shiftr, E_ADDR2|E_AUTOPRINT, "ca1", "[line [,line]] >[>...] [count] [flags]", "shift lines right"}, /* C_AT */ {"@", ex_at, E_ADDR2, "b", "@ [buffer]", "execute a buffer"}, /* C_APPEND */ {"append", ex_append, E_ADDR1|E_ADDR_ZERO|E_ADDR_ZERODEF, "!", "[line] a[ppend][!]", "append input to a line"}, /* C_ABBR */ {"abbreviate", ex_abbr, 0, "W", "ab[brev] [word replace]", "specify an input abbreviation"}, /* C_ARGS */ {"args", ex_args, 0, "", "ar[gs]", "display file argument list"}, /* C_BG */ {"bg", ex_bg, E_VIONLY, "", "bg", "put a foreground screen into the background"}, /* C_CHANGE */ {"change", ex_change, E_ADDR2|E_ADDR_ZERODEF, "!ca", "[line [,line]] c[hange][!] [count]", "change lines to input"}, /* C_CD */ {"cd", ex_cd, 0, "!f1o", "cd[!] [directory]", "change the current directory"}, /* C_CHDIR */ {"chdir", ex_cd, 0, "!f1o", "chd[ir][!] [directory]", "change the current directory"}, /* C_COPY */ {"copy", ex_copy, E_ADDR2|E_AUTOPRINT, "l1", "[line [,line]] co[py] line [flags]", "copy lines elsewhere in the file"}, /* C_CSCOPE */ {"cscope", ex_cscope, 0, "!s", "cs[cope] command [args]", "create a set of tags using a cscope command"}, /* * !!! * Adding new commands starting with 'd' may break the delete command code * in ex_cmd() (the ex parser). Read through the comments there, first. */ /* C_DELETE */ {"delete", ex_delete, E_ADDR2|E_AUTOPRINT, "bca1", "[line [,line]] d[elete][flags] [buffer] [count] [flags]", "delete lines from the file"}, /* C_DISPLAY */ {"display", ex_display, 0, "w1r", "display b[uffers] | c[onnections] | s[creens] | t[ags]", "display buffers, connections, screens or tags"}, /* C_EDIT */ {"edit", ex_edit, E_NEWSCREEN, "f1o", "[Ee][dit][!] [+cmd] [file]", "begin editing another file"}, /* C_EX */ {"ex", ex_edit, E_NEWSCREEN, "f1o", "[Ee]x[!] [+cmd] [file]", "begin editing another file"}, /* C_EXUSAGE */ {"exusage", ex_usage, 0, "w1o", "[exu]sage [command]", "display ex command usage statement"}, /* C_FILE */ {"file", ex_file, 0, "f1o", "f[ile] [name]", "display (and optionally set) file name"}, /* C_FG */ {"fg", ex_fg, E_NEWSCREEN|E_VIONLY, "f1o", "[Ff]g [file]", "bring a backgrounded screen into the foreground"}, /* C_GLOBAL */ {"global", ex_global, E_ADDR2_ALL, "!s", "[line [,line]] g[lobal][!] [;/]RE[;/] [commands]", "execute a global command on lines matching an RE"}, /* C_HELP */ {"help", ex_help, 0, "", "he[lp]", "display help statement"}, /* C_INSERT */ {"insert", ex_insert, E_ADDR1|E_ADDR_ZERO|E_ADDR_ZERODEF, "!", "[line] i[nsert][!]", "insert input before a line"}, /* C_JOIN */ {"join", ex_join, E_ADDR2|E_AUTOPRINT, "!ca1", "[line [,line]] j[oin][!] [count] [flags]", "join lines into a single line"}, /* C_K */ {"k", ex_mark, E_ADDR1, "w1r", "[line] k key", "mark a line position"}, /* C_LIST */ {"list", ex_list, E_ADDR2|E_CLRFLAG, "ca1", "[line [,line]] l[ist] [count] [#]", "display lines in an unambiguous form"}, /* C_MOVE */ {"move", ex_move, E_ADDR2|E_AUTOPRINT, "l", "[line [,line]] m[ove] line", "move lines elsewhere in the file"}, /* C_MARK */ {"mark", ex_mark, E_ADDR1, "w1r", "[line] ma[rk] key", "mark a line position"}, /* C_MAP */ {"map", ex_map, 0, "!W", "map[!] [keys replace]", "map input or commands to one or more keys"}, /* C_MKEXRC */ {"mkexrc", ex_mkexrc, 0, "!f1r", "mkexrc[!] file", "write a .exrc file"}, /* C_NEXT */ {"next", ex_next, E_NEWSCREEN, "!fN", "[Nn][ext][!] [+cmd] [file ...]", "edit (and optionally specify) the next file"}, /* C_NUMBER */ {"number", ex_number, E_ADDR2|E_CLRFLAG, "ca1", "[line [,line]] nu[mber] [count] [l]", "change display to number lines"}, /* C_OPEN */ {"open", ex_open, E_ADDR1, "s", "[line] o[pen] [/RE/] [flags]", "enter \"open\" mode (not implemented)"}, /* C_PRINT */ {"print", ex_pr, E_ADDR2|E_CLRFLAG, "ca1", "[line [,line]] p[rint] [count] [#l]", "display lines"}, /* C_PERLCMD */ {"perl", ex_perl, E_ADDR2_ALL|E_ADDR_ZERO| E_ADDR_ZERODEF|E_SECURE, "s", "pe[rl] cmd", "run the perl interpreter with the command"}, /* C_PERLDOCMD */ {"perldo", ex_perl, E_ADDR2_ALL|E_ADDR_ZERO| E_ADDR_ZERODEF|E_SECURE, "s", "perld[o] cmd", "run the perl interpreter with the command, on each line"}, /* C_PRESERVE */ {"preserve", ex_preserve, 0, "", "pre[serve]", "preserve an edit session for recovery"}, /* C_PREVIOUS */ {"previous", ex_prev, E_NEWSCREEN, "!", "[Pp]rev[ious][!]", "edit the previous file in the file argument list"}, /* C_PUT */ {"put", ex_put, E_ADDR1|E_AUTOPRINT|E_ADDR_ZERO|E_ADDR_ZERODEF, "b", "[line] pu[t] [buffer]", "append a cut buffer to the line"}, /* C_QUIT */ {"quit", ex_quit, 0, "!", "q[uit][!]", "exit ex/vi"}, /* C_READ */ {"read", ex_read, E_ADDR1|E_ADDR_ZERO|E_ADDR_ZERODEF, "s", "[line] r[ead] [!cmd | [file]]", "append input from a command or file to the line"}, /* C_RECOVER */ {"recover", ex_recover, 0, "!f1r", "recover[!] file", "recover a saved file"}, /* C_RESIZE */ {"resize", ex_resize, E_VIONLY, "c+", "resize [+-]rows", "grow or shrink the current screen"}, /* C_REWIND */ {"rewind", ex_rew, 0, "!", "rew[ind][!]", "re-edit all the files in the file argument list"}, /* * !!! * Adding new commands starting with 's' may break the substitute command code * in ex_cmd() (the ex parser). Read through the comments there, first. */ /* C_SUBSTITUTE */ {"s", ex_s, E_ADDR2, "s", "[line [,line]] s [[/;]RE[/;]repl[/;] [cgr] [count] [#lp]]", "substitute on lines matching an RE"}, /* C_SCRIPT */ {"script", ex_script, E_SECURE, "!f1o", "sc[ript][!] [file]", "run a shell in a screen"}, /* C_SET */ {"set", ex_set, 0, "wN", "se[t] [option[=[value]]...] [nooption ...] [option? ...] [all]", "set options (use \":set all\" to see all options)"}, /* C_SHELL */ {"shell", ex_shell, E_SECURE, "", "sh[ell]", "suspend editing and run a shell"}, /* C_SOURCE */ {"source", ex_source, 0, "f1r", "so[urce] file", "read a file of ex commands"}, /* C_STOP */ {"stop", ex_stop, E_SECURE, "!", "st[op][!]", "suspend the edit session"}, /* C_SUSPEND */ {"suspend", ex_stop, E_SECURE, "!", "su[spend][!]", "suspend the edit session"}, /* C_T */ {"t", ex_copy, E_ADDR2|E_AUTOPRINT, "l1", "[line [,line]] t line [flags]", "copy lines elsewhere in the file"}, /* C_TAG */ {"tag", ex_tag_push, E_NEWSCREEN, "!w1o", "[Tt]a[g][!] [string]", "edit the file containing the tag"}, /* C_TAGNEXT */ {"tagnext", ex_tag_next, 0, "!", "tagn[ext][!]", "move to the next tag"}, /* C_TAGPOP */ {"tagpop", ex_tag_pop, 0, "!w1o", "tagp[op][!] [number | file]", "return to the previous group of tags"}, /* C_TAGPREV */ {"tagprev", ex_tag_prev, 0, "!", "tagpr[ev][!]", "move to the previous tag"}, /* C_TAGTOP */ {"tagtop", ex_tag_top, 0, "!", "tagt[op][!]", "discard all tags"}, /* C_TCLCMD */ {"tcl", ex_tcl, E_ADDR2_ALL|E_ADDR_ZERO| E_ADDR_ZERODEF|E_SECURE, "s", "tc[l] cmd", "run the tcl interpreter with the command"}, /* C_UNDO */ {"undo", ex_undo, E_AUTOPRINT, "", "u[ndo]", "undo the most recent change"}, /* C_UNABBREVIATE */ {"unabbreviate",ex_unabbr, 0, "w1r", "una[bbrev] word", "delete an abbreviation"}, /* C_UNMAP */ {"unmap", ex_unmap, 0, "!w1r", "unm[ap][!] word", "delete an input or command map"}, /* C_V */ {"v", ex_v, E_ADDR2_ALL, "s", "[line [,line]] v [;/]RE[;/] [commands]", "execute a global command on lines NOT matching an RE"}, /* C_VERSION */ {"version", ex_version, 0, "", "version", "display the program version information"}, /* C_VISUAL_EX */ {"visual", ex_visual, E_ADDR1|E_ADDR_ZERODEF, "2c11", "[line] vi[sual] [-|.|+|^] [window_size] [flags]", "enter visual (vi) mode from ex mode"}, /* C_VISUAL_VI */ {"visual", ex_edit, E_NEWSCREEN, "f1o", "[Vv]i[sual][!] [+cmd] [file]", "edit another file (from vi mode only)"}, /* C_VIUSAGE */ {"viusage", ex_viusage, 0, "w1o", "[viu]sage [key]", "display vi key usage statement"}, /* C_WRITE */ {"write", ex_write, E_ADDR2_ALL|E_ADDR_ZERODEF, "!s", "[line [,line]] w[rite][!] [ !cmd | [>>] [file]]", "write the file"}, /* C_WN */ {"wn", ex_wn, E_ADDR2_ALL|E_ADDR_ZERODEF, "!s", "[line [,line]] wn[!] [>>] [file]", "write the file and switch to the next file"}, /* C_WQ */ {"wq", ex_wq, E_ADDR2_ALL|E_ADDR_ZERODEF, "!s", "[line [,line]] wq[!] [>>] [file]", "write the file and exit"}, /* C_XIT */ {"xit", ex_xit, E_ADDR2_ALL|E_ADDR_ZERODEF, "!f1o", "[line [,line]] x[it][!] [file]", "exit"}, /* C_YANK */ {"yank", ex_yank, E_ADDR2, "bca", "[line [,line]] ya[nk] [buffer] [count]", "copy lines to a cut buffer"}, /* C_Z */ {"z", ex_z, E_ADDR1, "3c01", "[line] z [-|.|+|^|=] [count] [flags]", "display different screens of the file"}, /* C_SUBTILDE */ {"~", ex_subtilde, E_ADDR2, "s", "[line [,line]] ~ [cgr] [count] [#lp]", "replace previous RE with previous replacement string,"}, {NULL}, }; vigor-0.016.orig/ex/ex_cscope.c0100644000076400007640000005714607103707264015041 0ustar cjw44cjw44/*- * Copyright (c) 1994, 1996 * Rob Mayoff. All rights reserved. * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_cscope.c 10.13 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include /* XXX: param.h may not have included types.h */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "pathnames.h" #include "tag.h" #define CSCOPE_DBFILE "cscope.out" #define CSCOPE_PATHS "cscope.tpath" /* * 0name find all uses of name * 1name find definition of name * 2name find all function calls made from name * 3name find callers of name * 4string find text string (cscope 12.9) * 4name find assignments to name (cscope 13.3) * 5pattern change pattern -- NOT USED * 6pattern find pattern * 7name find files with name as substring * 8name find files #including name */ #define FINDHELP "\ find c|d|e|f|g|i|s|t buffer|pattern\n\ c: find callers of name\n\ d: find all function calls made from name\n\ e: find pattern\n\ f: find files with name as substring\n\ g: find definition of name\n\ i: find files #including name\n\ s: find all uses of name\n\ t: find assignments to name" static int cscope_add __P((SCR *, EXCMD *, char *)); static int cscope_find __P((SCR *, EXCMD*, char *)); static int cscope_help __P((SCR *, EXCMD *, char *)); static int cscope_kill __P((SCR *, EXCMD *, char *)); static int cscope_reset __P((SCR *, EXCMD *, char *)); typedef struct _cc { char *name; int (*function) __P((SCR *, EXCMD *, char *)); char *help_msg; char *usage_msg; } CC; static CC const cscope_cmds[] = { { "add", cscope_add, "Add a new cscope database", "add file | directory" }, { "find", cscope_find, "Query the databases for a pattern", FINDHELP }, { "help", cscope_help, "Show help for cscope commands", "help [command]" }, { "kill", cscope_kill, "Kill a cscope connection", "kill number" }, { "reset", cscope_reset, "Discard all current cscope connections", "reset" }, { NULL } }; static TAGQ *create_cs_cmd __P((SCR *, char *, size_t *)); static int csc_help __P((SCR *, char *)); static void csc_file __P((SCR *, CSC *, char *, char **, size_t *, int *)); static int get_paths __P((SCR *, CSC *)); static CC const *lookup_ccmd __P((char *)); static int parse __P((SCR *, CSC *, TAGQ *, int *)); static int read_prompt __P((SCR *, CSC *)); static int run_cscope __P((SCR *, CSC *, char *)); static int start_cscopes __P((SCR *, EXCMD *)); static int terminate __P((SCR *, CSC *, int)); /* * ex_cscope -- * Perform an ex cscope. * * PUBLIC: int ex_cscope __P((SCR *, EXCMD *)); */ int ex_cscope(sp, cmdp) SCR *sp; EXCMD *cmdp; { CC const *ccp; EX_PRIVATE *exp; int i; char *cmd, *p; /* Initialize the default cscope directories. */ exp = EXP(sp); if (!F_ISSET(exp, EXP_CSCINIT) && start_cscopes(sp, cmdp)) return (1); F_SET(exp, EXP_CSCINIT); /* Skip leading whitespace. */ for (p = cmdp->argv[0]->bp, i = cmdp->argv[0]->len; i > 0; --i, ++p) if (!isspace(*p)) break; if (i == 0) goto usage; /* Skip the command to any arguments. */ for (cmd = p; i > 0; --i, ++p) if (isspace(*p)) break; if (*p != '\0') { *p++ = '\0'; for (; *p && isspace(*p); ++p); } if ((ccp = lookup_ccmd(cmd)) == NULL) { usage: msgq(sp, M_ERR, "309|Use \"cscope help\" for help"); return (1); } /* Call the underlying function. */ return (ccp->function(sp, cmdp, p)); } /* * start_cscopes -- * Initialize the cscope package. */ static int start_cscopes(sp, cmdp) SCR *sp; EXCMD *cmdp; { size_t blen, len; char *bp, *cscopes, *p, *t; /* * EXTENSION #1: * * If the CSCOPE_DIRS environment variable is set, we treat it as a * list of cscope directories that we're using, similar to the tags * edit option. * * XXX * This should probably be an edit option, although that implies that * we start/stop cscope processes periodically, instead of once when * the editor starts. */ if ((cscopes = getenv("CSCOPE_DIRS")) == NULL) return (0); len = strlen(cscopes); GET_SPACE_RET(sp, bp, blen, len); memcpy(bp, cscopes, len + 1); for (cscopes = t = bp; (p = strsep(&t, "\t :")) != NULL;) if (*p != '\0') (void)cscope_add(sp, cmdp, p); FREE_SPACE(sp, bp, blen); return (0); } /* * cscope_add -- * The cscope add command. */ static int cscope_add(sp, cmdp, dname) SCR *sp; EXCMD *cmdp; char *dname; { struct stat sb; EX_PRIVATE *exp; CSC *csc; size_t len; int cur_argc; char *dbname, path[MAXPATHLEN]; exp = EXP(sp); /* * 0 additional args: usage. * 1 additional args: matched a file. * >1 additional args: object, too many args. */ cur_argc = cmdp->argc; if (argv_exp2(sp, cmdp, dname, strlen(dname))) return (1); if (cmdp->argc == cur_argc) { (void)csc_help(sp, "add"); return (1); } if (cmdp->argc == cur_argc + 1) dname = cmdp->argv[cur_argc]->bp; else { ex_emsg(sp, dname, EXM_FILECOUNT); return (1); } /* * The user can specify a specific file (so they can have multiple * Cscope databases in a single directory) or a directory. If the * file doesn't exist, we're done. If it's a directory, append the * standard database file name and try again. Store the directory * name regardless so that we can use it as a base for searches. */ if (stat(dname, &sb)) { msgq(sp, M_SYSERR, dname); return (1); } if (S_ISDIR(sb.st_mode)) { (void)snprintf(path, sizeof(path), "%s/%s", dname, CSCOPE_DBFILE); if (stat(path, &sb)) { msgq(sp, M_SYSERR, path); return (1); } dbname = CSCOPE_DBFILE; } else if ((dbname = strrchr(dname, '/')) != NULL) *dbname++ = '\0'; /* Allocate a cscope connection structure and initialize its fields. */ len = strlen(dname); CALLOC_RET(sp, csc, CSC *, 1, sizeof(CSC) + len); csc->dname = csc->buf; csc->dlen = len; memcpy(csc->dname, dname, len); csc->mtime = sb.st_mtime; /* Get the search paths for the cscope. */ if (get_paths(sp, csc)) goto err; /* Start the cscope process. */ if (run_cscope(sp, csc, dbname)) goto err; /* * Add the cscope connection to the screen's list. From now on, * on error, we have to call terminate, which expects the csc to * be on the chain. */ LIST_INSERT_HEAD(&exp->cscq, csc, q); /* Read the initial prompt from the cscope to make sure it's okay. */ if (read_prompt(sp, csc)) { terminate(sp, csc, 0); return (1); } return (0); err: free(csc); return (1); } /* * get_paths -- * Get the directories to search for the files associated with this * cscope database. */ static int get_paths(sp, csc) SCR *sp; CSC *csc; { struct stat sb; int fd, nentries; size_t len; char *p, **pathp, buf[MAXPATHLEN * 2]; /* * EXTENSION #2: * * If there's a cscope directory with a file named CSCOPE_PATHS, it * contains a colon-separated list of paths in which to search for * files returned by cscope. * * XXX * These paths are absolute paths, and not relative to the cscope * directory. To fix this, rewrite the each path using the cscope * directory as a prefix. */ (void)snprintf(buf, sizeof(buf), "%s/%s", csc->dname, CSCOPE_PATHS); if (stat(buf, &sb) == 0) { /* Read in the CSCOPE_PATHS file. */ len = sb.st_size; MALLOC_RET(sp, csc->pbuf, char *, len + 1); if ((fd = open(buf, O_RDONLY, 0)) < 0 || read(fd, csc->pbuf, len) != len) { msgq_str(sp, M_SYSERR, buf, "%s"); if (fd >= 0) (void)close(fd); return (1); } (void)close(fd); csc->pbuf[len] = '\0'; /* Count up the entries. */ for (nentries = 0, p = csc->pbuf; *p != '\0'; ++p) if (p[0] == ':' && p[1] != '\0') ++nentries; /* Build an array of pointers to the paths. */ CALLOC_GOTO(sp, csc->paths, char **, nentries + 1, sizeof(char **)); for (pathp = csc->paths, p = strtok(csc->pbuf, ":"); p != NULL; p = strtok(NULL, ":")) *pathp++ = p; return (0); } /* * If the CSCOPE_PATHS file doesn't exist, we look for files * relative to the cscope directory. */ if ((csc->pbuf = strdup(csc->dname)) == NULL) { msgq(sp, M_SYSERR, NULL); return (1); } CALLOC_GOTO(sp, csc->paths, char **, 2, sizeof(char *)); csc->paths[0] = csc->pbuf; return (0); alloc_err: if (csc->pbuf != NULL) { free(csc->pbuf); csc->pbuf = NULL; } return (1); } /* * run_cscope -- * Fork off the cscope process. */ static int run_cscope(sp, csc, dbname) SCR *sp; CSC *csc; char *dbname; { int to_cs[2], from_cs[2]; char cmd[MAXPATHLEN * 2]; /* * Cscope reads from to_cs[0] and writes to from_cs[1]; vi reads from * from_cs[0] and writes to to_cs[1]. */ to_cs[0] = to_cs[1] = from_cs[0] = from_cs[0] = -1; if (pipe(to_cs) < 0 || pipe(from_cs) < 0) { msgq(sp, M_SYSERR, "pipe"); goto err; } switch (csc->pid = vfork()) { case -1: msgq(sp, M_SYSERR, "vfork"); err: if (to_cs[0] != -1) (void)close(to_cs[0]); if (to_cs[1] != -1) (void)close(to_cs[1]); if (from_cs[0] != -1) (void)close(from_cs[0]); if (from_cs[1] != -1) (void)close(from_cs[1]); return (1); case 0: /* child: run cscope. */ (void)dup2(to_cs[0], STDIN_FILENO); (void)dup2(from_cs[1], STDOUT_FILENO); (void)dup2(from_cs[1], STDERR_FILENO); /* Close unused file descriptors. */ (void)close(to_cs[1]); (void)close(from_cs[0]); /* Run the cscope command. */ #define CSCOPE_CMD_FMT "cd '%s' && exec cscope -dl -f %s" (void)snprintf(cmd, sizeof(cmd), CSCOPE_CMD_FMT, csc->dname, dbname); (void)execl(_PATH_BSHELL, "sh", "-c", cmd, NULL); msgq_str(sp, M_SYSERR, cmd, "execl: %s"); _exit (127); /* NOTREACHED */ default: /* parent. */ /* Close unused file descriptors. */ (void)close(to_cs[0]); (void)close(from_cs[1]); /* * Save the file descriptors for later duplication, and * reopen as streams. */ csc->to_fd = to_cs[1]; csc->to_fp = fdopen(to_cs[1], "w"); csc->from_fd = from_cs[0]; csc->from_fp = fdopen(from_cs[0], "r"); break; } return (0); } /* * cscope_find -- * The cscope find command. */ static int cscope_find(sp, cmdp, pattern) SCR *sp; EXCMD *cmdp; char *pattern; { CSC *csc, *csc_next; EX_PRIVATE *exp; FREF *frp; TAGQ *rtqp, *tqp; TAG *rtp; recno_t lno; size_t cno, search; int force, istmp, matches; exp = EXP(sp); /* Check for connections. */ if (exp->cscq.lh_first == NULL) { msgq(sp, M_ERR, "310|No cscope connections running"); return (1); } /* * Allocate all necessary memory before doing anything hard. If the * tags stack is empty, we'll need the `local context' TAGQ structure * later. */ rtp = NULL; rtqp = NULL; if (exp->tq.cqh_first == (void *)&exp->tq) { /* Initialize the `local context' tag queue structure. */ CALLOC_GOTO(sp, rtqp, TAGQ *, 1, sizeof(TAGQ)); CIRCLEQ_INIT(&rtqp->tagq); /* Initialize and link in its tag structure. */ CALLOC_GOTO(sp, rtp, TAG *, 1, sizeof(TAG)); CIRCLEQ_INSERT_HEAD(&rtqp->tagq, rtp, q); rtqp->current = rtp; } /* Create the cscope command. */ if ((tqp = create_cs_cmd(sp, pattern, &search)) == NULL) goto err; /* * Stick the current context in a convenient place, we'll lose it * when we switch files. */ frp = sp->frp; lno = sp->lno; cno = sp->cno; istmp = F_ISSET(sp->frp, FR_TMPFILE) && !F_ISSET(cmdp, E_NEWSCREEN); /* Search all open connections for a match. */ matches = 0; for (csc = exp->cscq.lh_first; csc != NULL; csc = csc_next) { /* Copy csc->q.lh_next here in case csc is killed. */ csc_next = csc->q.le_next; /* * Send the command to the cscope program. (We skip the * first two bytes of the command, because we stored the * search cscope command character and a leading space * there.) */ (void)fprintf(csc->to_fp, "%d%s\n", search, tqp->tag + 2); (void)fflush(csc->to_fp); /* Read the output. */ if (parse(sp, csc, tqp, &matches)) { if (rtqp != NULL) free(rtqp); tagq_free(sp, tqp); return (1); } } if (matches == 0) { msgq(sp, M_INFO, "278|No matches for query"); return (0); } tqp->current = tqp->tagq.cqh_first; /* Try to switch to the first tag. */ force = FL_ISSET(cmdp->iflags, E_C_FORCE); if (F_ISSET(cmdp, E_NEWSCREEN)) { if (ex_tag_Nswitch(sp, tqp->current, force)) goto err; /* Everything else gets done in the new screen. */ sp = sp->nextdisp; exp = EXP(sp); } else if (ex_tag_nswitch(sp, tqp->current, force)) goto err; /* * If this is the first tag, put a `current location' queue entry * in place, so we can pop all the way back to the current mark. * Note, it doesn't point to much of anything, it's a placeholder. */ if (exp->tq.cqh_first == (void *)&exp->tq) { CIRCLEQ_INSERT_HEAD(&exp->tq, rtqp, q); } else rtqp = exp->tq.cqh_first; /* Link the current TAGQ structure into place. */ CIRCLEQ_INSERT_HEAD(&exp->tq, tqp, q); (void)cscope_search(sp, tqp, tqp->current); /* * Move the current context from the temporary save area into the * right structure. * * If we were in a temporary file, we don't have a context to which * we can return, so just make it be the same as what we're moving * to. It will be a little odd that ^T doesn't change anything, but * I don't think it's a big deal. */ if (istmp) { rtqp->current->frp = sp->frp; rtqp->current->lno = sp->lno; rtqp->current->cno = sp->cno; } else { rtqp->current->frp = frp; rtqp->current->lno = lno; rtqp->current->cno = cno; } return (0); err: alloc_err: if (rtqp != NULL) free(rtqp); if (rtp != NULL) free(rtp); return (1); } /* * create_cs_cmd -- * Build a cscope command, creating and initializing the base TAGQ. */ static TAGQ * create_cs_cmd(sp, pattern, searchp) SCR *sp; char *pattern; size_t *searchp; { CB *cbp; TAGQ *tqp; size_t tlen; char *p; /* * Cscope supports a "change pattern" command which we never use, * cscope command 5. Set CSCOPE_QUERIES[5] to " " since the user * can't pass " " as the first character of pattern. That way the * user can't ask for pattern 5 so we don't need any special-case * code. */ #define CSCOPE_QUERIES "sgdct efi" if (pattern == NULL) goto usage; /* Skip leading blanks, check for command character. */ for (; isblank(pattern[0]); ++pattern); if (pattern[0] == '\0' || !isblank(pattern[1])) goto usage; for (*searchp = 0, p = CSCOPE_QUERIES; *p != '\0' && *p != pattern[0]; ++*searchp, ++p); if (*p == '\0') { msgq(sp, M_ERR, "311|%s: unknown search type: use one of %s", KEY_NAME(sp, pattern[0]), CSCOPE_QUERIES); return (NULL); } /* Skip characters to the pattern. */ for (p = pattern + 1; *p != '\0' && isblank(*p); ++p); if (*p == '\0') { usage: (void)csc_help(sp, "find"); return (NULL); } /* The user can specify the contents of a buffer as the pattern. */ cbp = NULL; if (p[0] == '"' && p[1] != '\0' && p[2] == '\0') CBNAME(sp, cbp, p[1]); if (cbp != NULL) { p = cbp->textq.cqh_first->lb; tlen = cbp->textq.cqh_first->len; } else tlen = strlen(p); /* Allocate and initialize the TAGQ structure. */ CALLOC(sp, tqp, TAGQ *, 1, sizeof(TAGQ) + tlen + 3); if (tqp == NULL) return (NULL); CIRCLEQ_INIT(&tqp->tagq); tqp->tag = tqp->buf; tqp->tag[0] = pattern[0]; tqp->tag[1] = ' '; tqp->tlen = tlen + 2; memcpy(tqp->tag + 2, p, tlen); tqp->tag[tlen + 2] = '\0'; F_SET(tqp, TAG_CSCOPE); return (tqp); } /* * parse -- * Parse the cscope output. */ static int parse(sp, csc, tqp, matchesp) SCR *sp; CSC *csc; TAGQ *tqp; int *matchesp; { TAG *tp; recno_t slno; size_t dlen, nlen, slen; int ch, i, isolder, nlines; char *dname, *name, *search, *p, *t, dummy[2], buf[2048]; for (;;) { if (!fgets(buf, sizeof(buf), csc->from_fp)) goto io_err; /* * If the database is out of date, or there's some other * problem, cscope will output error messages before the * number-of-lines output. Display/discard any output * that doesn't match what we want. */ #define CSCOPE_NLINES_FMT "cscope: %d lines%1[\n]" if (sscanf(buf, CSCOPE_NLINES_FMT, &nlines, dummy) == 2) break; if ((p = strchr(buf, '\n')) != NULL) *p = '\0'; msgq(sp, M_ERR, "%s: \"%s\"", csc->dname, buf); } while (nlines--) { if (fgets(buf, sizeof(buf), csc->from_fp) == NULL) goto io_err; /* If the line's too long for the buffer, discard it. */ if ((p = strchr(buf, '\n')) == NULL) { while ((ch = getc(csc->from_fp)) != EOF && ch != '\n'); continue; } *p = '\0'; /* * The cscope output is in the following format: * * * * Figure out how long everything is so we can allocate in one * swell foop, but discard anything that looks wrong. */ for (p = buf, i = 0; i < 3 && (t = strsep(&p, "\t ")) != NULL; ++i) switch (i) { case 0: /* Filename. */ name = t; nlen = strlen(name); break; case 1: /* Context. */ break; case 2: /* Line number. */ slno = (recno_t)atol(t); break; } if (i != 3 || p == NULL || t == NULL) continue; /* The rest of the string is the search pattern. */ search = p; slen = strlen(p); /* Resolve the file name. */ csc_file(sp, csc, name, &dname, &dlen, &isolder); /* * If the file is older than the cscope database, that is, * the database was built since the file was last modified, * or there wasn't a search string, use the line number. */ if (isolder || strcmp(search, "") == 0) { search = NULL; slen = 0; } /* * Allocate and initialize a tag structure plus the variable * length cscope information that follows it. */ CALLOC_RET(sp, tp, TAG *, 1, sizeof(TAG) + dlen + 2 + nlen + 1 + slen + 1); tp->fname = tp->buf; if (dlen != 0) { memcpy(tp->fname, dname, dlen); tp->fname[dlen] = '/'; ++dlen; } memcpy(tp->fname + dlen, name, nlen + 1); tp->fnlen = dlen + nlen; tp->slno = slno; if (slen != 0) { tp->search = tp->fname + tp->fnlen + 1; memcpy(tp->search, search, (tp->slen = slen) + 1); } CIRCLEQ_INSERT_TAIL(&tqp->tagq, tp, q); ++*matchesp; } (void)read_prompt(sp, csc); return (0); io_err: if (feof(csc->from_fp)) errno = EIO; msgq_str(sp, M_SYSERR, "%s", csc->dname); terminate(sp, csc, 0); return (1); } /* * csc_file -- * Search for the right path to this file. */ static void csc_file(sp, csc, name, dirp, dlenp, isolderp) SCR *sp; CSC *csc; char *name, **dirp; size_t *dlenp; int *isolderp; { struct stat sb; char **pp, buf[MAXPATHLEN]; /* * Check for the file in all of the listed paths. If we don't * find it, we simply return it unchanged. We have to do this * now, even though it's expensive, because if the user changes * directories, we can't change our minds as to where the file * lives. */ for (pp = csc->paths; *pp != NULL; ++pp) { (void)snprintf(buf, sizeof(buf), "%s/%s", *pp, name); if (stat(buf, &sb) == 0) { *dirp = *pp; *dlenp = strlen(*pp); *isolderp = sb.st_mtime < csc->mtime; return; } } *dlenp = 0; } /* * cscope_help -- * The cscope help command. */ static int cscope_help(sp, cmdp, subcmd) SCR *sp; EXCMD *cmdp; char *subcmd; { return (csc_help(sp, subcmd)); } /* * csc_help -- * Display help/usage messages. */ static int csc_help(sp, cmd) SCR *sp; char *cmd; { CC const *ccp; if (cmd != NULL && *cmd != '\0') if ((ccp = lookup_ccmd(cmd)) == NULL) { ex_printf(sp, "%s doesn't match any cscope command\n", cmd); return (1); } else { ex_printf(sp, "Command: %s (%s)\n", ccp->name, ccp->help_msg); ex_printf(sp, " Usage: %s\n", ccp->usage_msg); return (0); } ex_printf(sp, "cscope commands:\n"); for (ccp = cscope_cmds; ccp->name != NULL; ++ccp) ex_printf(sp, " %*s: %s\n", 5, ccp->name, ccp->help_msg); return (0); } /* * cscope_kill -- * The cscope kill command. */ static int cscope_kill(sp, cmdp, cn) SCR *sp; EXCMD *cmdp; char *cn; { return (terminate(sp, NULL, atoi(cn))); } /* * terminate -- * Detach from a cscope process. */ static int terminate(sp, csc, n) SCR *sp; CSC *csc; int n; { EX_PRIVATE *exp; int i, pstat; exp = EXP(sp); /* * We either get a csc structure or a number. If not provided a * csc structure, find the right one. */ if (csc == NULL) { if (n < 1) goto badno; for (i = 1, csc = exp->cscq.lh_first; csc != NULL; csc = csc->q.le_next, i++) if (i == n) break; if (csc == NULL) { badno: msgq(sp, M_ERR, "312|%d: no such cscope session", n); return (1); } } /* * XXX * Theoretically, we have the only file descriptors to the process, * so closing them should let it exit gracefully, deleting temporary * files, etc. The original vi cscope integration sent the cscope * connection a SIGTERM signal, so I'm not sure if closing the file * descriptors is sufficient. */ if (csc->from_fp != NULL) (void)fclose(csc->from_fp); if (csc->to_fp != NULL) (void)fclose(csc->to_fp); (void)waitpid(csc->pid, &pstat, 0); /* Discard cscope connection information. */ LIST_REMOVE(csc, q); if (csc->pbuf != NULL) free(csc->pbuf); if (csc->paths != NULL) free(csc->paths); free(csc); return (0); } /* * cscope_reset -- * The cscope reset command. */ static int cscope_reset(sp, cmdp, notusedp) SCR *sp; EXCMD *cmdp; char *notusedp; { EX_PRIVATE *exp; for (exp = EXP(sp); exp->cscq.lh_first != NULL;) if (cscope_kill(sp, cmdp, "1")) return (1); return (0); } /* * cscope_display -- * Display current connections. * * PUBLIC: int cscope_display __P((SCR *)); */ int cscope_display(sp) SCR *sp; { EX_PRIVATE *exp; CSC *csc; int i; exp = EXP(sp); if (exp->cscq.lh_first == NULL) { ex_printf(sp, "No cscope connections.\n"); return (0); } for (i = 1, csc = exp->cscq.lh_first; csc != NULL; ++i, csc = csc->q.le_next) ex_printf(sp, "%2d %s (process %lu)\n", i, csc->dname, (u_long)csc->pid); return (0); } /* * cscope_search -- * Search a file for a cscope entry. * * PUBLIC: int cscope_search __P((SCR *, TAGQ *, TAG *)); */ int cscope_search(sp, tqp, tp) SCR *sp; TAGQ *tqp; TAG *tp; { MARK m; /* If we don't have a search pattern, use the line number. */ if (tp->search == NULL) { if (!db_exist(sp, tp->slno)) { tag_msg(sp, TAG_BADLNO, tqp->tag); return (1); } m.lno = tp->slno; } else { /* * Search for the tag; cheap fallback for C functions * if the name is the same but the arguments have changed. */ m.lno = 1; m.cno = 0; if (f_search(sp, &m, &m, tp->search, tp->slen, NULL, SEARCH_CSCOPE | SEARCH_FILE)) { tag_msg(sp, TAG_SEARCH, tqp->tag); return (1); } /* * !!! * Historically, tags set the search direction if it wasn't * already set. */ if (sp->searchdir == NOTSET) sp->searchdir = FORWARD; } /* * !!! * Tags move to the first non-blank, NOT the search pattern start. */ sp->lno = m.lno; sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); return (0); } /* * lookup_ccmd -- * Return a pointer to the command structure. */ static CC const * lookup_ccmd(name) char *name; { CC const *ccp; size_t len; len = strlen(name); for (ccp = cscope_cmds; ccp->name != NULL; ++ccp) if (strncmp(name, ccp->name, len) == 0) return (ccp); return (NULL); } /* * read_prompt -- * Read a prompt from cscope. */ static int read_prompt(sp, csc) SCR *sp; CSC *csc; { int ch; #define CSCOPE_PROMPT ">> " for (;;) { while ((ch = getc(csc->from_fp)) != EOF && ch != CSCOPE_PROMPT[0]); if (ch == EOF) { terminate(sp, csc, 0); return (1); } if (getc(csc->from_fp) != CSCOPE_PROMPT[1]) continue; if (getc(csc->from_fp) != CSCOPE_PROMPT[2]) continue; break; } return (0); } vigor-0.016.orig/ex/ex_delete.c0100644000076400007640000000303707103707265015016 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_delete.c 10.9 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" #include "vigor_extern.h" /* * ex_delete: [line [,line]] d[elete] [buffer] [count] [flags] * * Delete lines from the file. * * PUBLIC: int ex_delete __P((SCR *, EXCMD *)); */ int ex_delete(sp, cmdp) SCR *sp; EXCMD *cmdp; { recno_t lno; NEEDFILE(sp, cmdp); vigor_maybe_confirm(75, "\"Are you absolutely sure you want to go through with this deletion?\"", sp->gp); /* * !!! * Historically, lines deleted in ex were not placed in the numeric * buffers. We follow historic practice so that we don't overwrite * vi buffers accidentally. */ if (cut(sp, FL_ISSET(cmdp->iflags, E_C_BUFFER) ? &cmdp->buffer : NULL, &cmdp->addr1, &cmdp->addr2, CUT_LINEMODE)) return (1); /* Delete the lines. */ if (del(sp, &cmdp->addr1, &cmdp->addr2, 1)) return (1); /* Set the cursor to the line after the last line deleted. */ sp->lno = cmdp->addr1.lno; /* Or the last line in the file if deleted to the end of the file. */ if (db_last(sp, &lno)) return (1); if (sp->lno > lno) sp->lno = lno; return (0); } vigor-0.016.orig/ex/ex_edit.c0100644000076400007640000000640707103707265014505 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_edit.c 10.10 (Berkeley) 4/27/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" static int ex_N_edit __P((SCR *, EXCMD *, FREF *, int)); /* * ex_edit -- :e[dit][!] [+cmd] [file] * :ex[!] [+cmd] [file] * :vi[sual][!] [+cmd] [file] * * Edit a file; if none specified, re-edit the current file. The third * form of the command can only be executed while in vi mode. See the * hack in ex.c:ex_cmd(). * * !!! * Historic vi didn't permit the '+' command form without specifying * a file name as well. This seems unreasonable, so we support it * regardless. * * PUBLIC: int ex_edit __P((SCR *, EXCMD *)); */ int ex_edit(sp, cmdp) SCR *sp; EXCMD *cmdp; { FREF *frp; int attach, setalt; switch (cmdp->argc) { case 0: /* * If the name has been changed, we edit that file, not the * original name. If the user was editing a temporary file * (or wasn't editing any file), create another one. The * reason for not reusing temporary files is that there is * special exit processing of them, and reuse is tricky. */ frp = sp->frp; if (sp->ep == NULL || F_ISSET(frp, FR_TMPFILE)) { if ((frp = file_add(sp, NULL)) == NULL) return (1); attach = 0; } else attach = 1; setalt = 0; break; case 1: if ((frp = file_add(sp, cmdp->argv[0]->bp)) == NULL) return (1); attach = 0; setalt = 1; set_alt_name(sp, cmdp->argv[0]->bp); break; default: abort(); } if (F_ISSET(cmdp, E_NEWSCREEN)) return (ex_N_edit(sp, cmdp, frp, attach)); /* * Check for modifications. * * !!! * Contrary to POSIX 1003.2-1992, autowrite did not affect :edit. */ if (file_m2(sp, FL_ISSET(cmdp->iflags, E_C_FORCE))) return (1); /* Switch files. */ if (file_init(sp, frp, NULL, (setalt ? FS_SETALT : 0) | (FL_ISSET(cmdp->iflags, E_C_FORCE) ? FS_FORCE : 0))) return (1); F_SET(sp, SC_FSWITCH); return (0); } /* * ex_N_edit -- * New screen version of ex_edit. */ static int ex_N_edit(sp, cmdp, frp, attach) SCR *sp; EXCMD *cmdp; FREF *frp; int attach; { SCR *new; /* Get a new screen. */ if (screen_init(sp->gp, sp, &new)) return (1); if (vs_split(sp, new, 0)) { (void)screen_end(new); return (1); } /* Get a backing file. */ if (attach) { /* Copy file state, keep the screen and cursor the same. */ new->ep = sp->ep; ++new->ep->refcnt; new->frp = frp; new->frp->flags = sp->frp->flags; new->lno = sp->lno; new->cno = sp->cno; } else if (file_init(new, frp, NULL, (FL_ISSET(cmdp->iflags, E_C_FORCE) ? FS_FORCE : 0))) { (void)vs_discard(new, NULL); (void)screen_end(new); return (1); } /* Create the argument list. */ new->cargv = new->argv = ex_buildargv(sp, NULL, frp->name); /* Set up the switch. */ sp->nextdisp = new; F_SET(sp, SC_SSWITCH); return (0); } vigor-0.016.orig/ex/ex_display.c0100644000076400007640000000614607103707265015225 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_display.c 10.12 (Berkeley) 4/10/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" #include "tag.h" static int bdisplay __P((SCR *)); static void db __P((SCR *, CB *, CHAR_T *)); /* * ex_display -- :display b[uffers] | c[onnections] | s[creens] | t[ags] * * Display cscope connections, buffers, tags or screens. * * PUBLIC: int ex_display __P((SCR *, EXCMD *)); */ int ex_display(sp, cmdp) SCR *sp; EXCMD *cmdp; { switch (cmdp->argv[0]->bp[0]) { case 'b': #undef ARG #define ARG "buffers" if (cmdp->argv[0]->len >= sizeof(ARG) || memcmp(cmdp->argv[0]->bp, ARG, cmdp->argv[0]->len)) break; return (bdisplay(sp)); case 'c': #undef ARG #define ARG "connections" if (cmdp->argv[0]->len >= sizeof(ARG) || memcmp(cmdp->argv[0]->bp, ARG, cmdp->argv[0]->len)) break; return (cscope_display(sp)); case 's': #undef ARG #define ARG "screens" if (cmdp->argv[0]->len >= sizeof(ARG) || memcmp(cmdp->argv[0]->bp, ARG, cmdp->argv[0]->len)) break; return (ex_sdisplay(sp)); case 't': #undef ARG #define ARG "tags" if (cmdp->argv[0]->len >= sizeof(ARG) || memcmp(cmdp->argv[0]->bp, ARG, cmdp->argv[0]->len)) break; return (ex_tag_display(sp)); } ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } /* * bdisplay -- * * Display buffers. */ static int bdisplay(sp) SCR *sp; { CB *cbp; if (sp->gp->cutq.lh_first == NULL && sp->gp->dcbp == NULL) { msgq(sp, M_INFO, "123|No cut buffers to display"); return (0); } /* Display regular cut buffers. */ for (cbp = sp->gp->cutq.lh_first; cbp != NULL; cbp = cbp->q.le_next) { if (isdigit(cbp->name)) continue; if (cbp->textq.cqh_first != (void *)&cbp->textq) db(sp, cbp, NULL); if (INTERRUPTED(sp)) return (0); } /* Display numbered buffers. */ for (cbp = sp->gp->cutq.lh_first; cbp != NULL; cbp = cbp->q.le_next) { if (!isdigit(cbp->name)) continue; if (cbp->textq.cqh_first != (void *)&cbp->textq) db(sp, cbp, NULL); if (INTERRUPTED(sp)) return (0); } /* Display default buffer. */ if ((cbp = sp->gp->dcbp) != NULL) db(sp, cbp, "default buffer"); return (0); } /* * db -- * Display a buffer. */ static void db(sp, cbp, name) SCR *sp; CB *cbp; CHAR_T *name; { CHAR_T *p; GS *gp; TEXT *tp; size_t len; gp = sp->gp; (void)ex_printf(sp, "********** %s%s\n", name == NULL ? KEY_NAME(sp, cbp->name) : name, F_ISSET(cbp, CB_LMODE) ? " (line mode)" : " (character mode)"); for (tp = cbp->textq.cqh_first; tp != (void *)&cbp->textq; tp = tp->q.cqe_next) { for (len = tp->len, p = tp->lb; len--; ++p) { (void)ex_puts(sp, KEY_NAME(sp, *p)); if (INTERRUPTED(sp)) return; } (void)ex_puts(sp, "\n"); } } vigor-0.016.orig/ex/ex_z.c0100644000076400007640000000735407103707265014033 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_z.c 10.10 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_z -- :[line] z [^-.+=] [count] [flags] * Adjust window. * * PUBLIC: int ex_z __P((SCR *, EXCMD *)); */ int ex_z(sp, cmdp) SCR *sp; EXCMD *cmdp; { MARK abs; recno_t cnt, equals, lno; int eofcheck; NEEDFILE(sp, cmdp); /* * !!! * If no count specified, use either two times the size of the * scrolling region, or the size of the window option. POSIX * 1003.2 claims that the latter is correct, but historic ex/vi * documentation and practice appear to use the scrolling region. * I'm using the window size as it means that the entire screen * is used instead of losing a line to roundoff. Note, we drop * a line from the cnt if using the window size to leave room for * the next ex prompt. */ if (FL_ISSET(cmdp->iflags, E_C_COUNT)) cnt = cmdp->count; else #ifdef HISTORIC_PRACTICE cnt = O_VAL(sp, O_SCROLL) * 2; #else cnt = O_VAL(sp, O_WINDOW) - 1; #endif equals = 0; eofcheck = 0; lno = cmdp->addr1.lno; switch (FL_ISSET(cmdp->iflags, E_C_CARAT | E_C_DASH | E_C_DOT | E_C_EQUAL | E_C_PLUS)) { case E_C_CARAT: /* Display cnt * 2 before the line. */ eofcheck = 1; if (lno > cnt * 2) cmdp->addr1.lno = (lno - cnt * 2) + 1; else cmdp->addr1.lno = 1; cmdp->addr2.lno = (cmdp->addr1.lno + cnt) - 1; break; case E_C_DASH: /* Line goes at the bottom of the screen. */ cmdp->addr1.lno = lno > cnt ? (lno - cnt) + 1 : 1; cmdp->addr2.lno = lno; break; case E_C_DOT: /* Line goes in the middle of the screen. */ /* * !!! * Historically, the "middleness" of the line overrode the * count, so that "3z.19" or "3z.20" would display the first * 12 lines of the file, i.e. (N - 1) / 2 lines before and * after the specified line. */ eofcheck = 1; cnt = (cnt - 1) / 2; cmdp->addr1.lno = lno > cnt ? lno - cnt : 1; cmdp->addr2.lno = lno + cnt; /* * !!! * Historically, z. set the absolute cursor mark. */ abs.lno = sp->lno; abs.cno = sp->cno; (void)mark_set(sp, ABSMARK1, &abs, 1); break; case E_C_EQUAL: /* Center with hyphens. */ /* * !!! * Strangeness. The '=' flag is like the '.' flag (see the * above comment, it applies here as well) but with a special * little hack. Print out lines of hyphens before and after * the specified line. Additionally, the cursor remains set * on that line. */ eofcheck = 1; cnt = (cnt - 1) / 2; cmdp->addr1.lno = lno > cnt ? lno - cnt : 1; cmdp->addr2.lno = lno - 1; if (ex_pr(sp, cmdp)) return (1); (void)ex_puts(sp, "----------------------------------------\n"); cmdp->addr2.lno = cmdp->addr1.lno = equals = lno; if (ex_pr(sp, cmdp)) return (1); (void)ex_puts(sp, "----------------------------------------\n"); cmdp->addr1.lno = lno + 1; cmdp->addr2.lno = (lno + cnt) - 1; break; default: /* If no line specified, move to the next one. */ if (F_ISSET(cmdp, E_ADDR_DEF)) ++lno; /* FALLTHROUGH */ case E_C_PLUS: /* Line goes at the top of the screen. */ eofcheck = 1; cmdp->addr1.lno = lno; cmdp->addr2.lno = (lno + cnt) - 1; break; } if (eofcheck) { if (db_last(sp, &lno)) return (1); if (cmdp->addr2.lno > lno) cmdp->addr2.lno = lno; } if (ex_pr(sp, cmdp)) return (1); if (equals) sp->lno = equals; return (0); } vigor-0.016.orig/ex/ex_filter.c0100644000076400007640000002047407103707265015045 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_filter.c 10.34 (Berkeley) 10/23/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" static int filter_ldisplay __P((SCR *, FILE *)); /* * ex_filter -- * Run a range of lines through a filter utility and optionally * replace the original text with the stdout/stderr output of * the utility. * * PUBLIC: int ex_filter __P((SCR *, * PUBLIC: EXCMD *, MARK *, MARK *, MARK *, char *, enum filtertype)); */ int ex_filter(sp, cmdp, fm, tm, rp, cmd, ftype) SCR *sp; EXCMD *cmdp; MARK *fm, *tm, *rp; char *cmd; enum filtertype ftype; { FILE *ifp, *ofp; pid_t parent_writer_pid, utility_pid; recno_t nread; int input[2], output[2], rval; char *name; rval = 0; /* Set return cursor position, which is never less than line 1. */ *rp = *fm; if (rp->lno == 0) rp->lno = 1; /* We're going to need a shell. */ if (opts_empty(sp, O_SHELL, 0)) return (1); /* * There are three different processes running through this code. * They are the utility, the parent-writer and the parent-reader. * The parent-writer is the process that writes from the file to * the utility, the parent reader is the process that reads from * the utility. * * Input and output are named from the utility's point of view. * The utility reads from input[0] and the parent(s) write to * input[1]. The parent(s) read from output[0] and the utility * writes to output[1]. * * !!! * Historically, in the FILTER_READ case, the utility reads from * the terminal (e.g. :r! cat works). Otherwise open up utility * input pipe. */ ofp = NULL; input[0] = input[1] = output[0] = output[1] = -1; if (ftype != FILTER_READ && pipe(input) < 0) { msgq(sp, M_SYSERR, "pipe"); goto err; } /* Open up utility output pipe. */ if (pipe(output) < 0) { msgq(sp, M_SYSERR, "pipe"); goto err; } if ((ofp = fdopen(output[0], "r")) == NULL) { msgq(sp, M_SYSERR, "fdopen"); goto err; } /* Fork off the utility process. */ switch (utility_pid = vfork()) { case -1: /* Error. */ msgq(sp, M_SYSERR, "vfork"); err: if (input[0] != -1) (void)close(input[0]); if (input[1] != -1) (void)close(input[1]); if (ofp != NULL) (void)fclose(ofp); else if (output[0] != -1) (void)close(output[0]); if (output[1] != -1) (void)close(output[1]); return (1); case 0: /* Utility. */ /* * Redirect stdin from the read end of the input pipe, and * redirect stdout/stderr to the write end of the output pipe. * * !!! * Historically, ex only directed stdout into the input pipe, * letting stderr come out on the terminal as usual. Vi did * not, directing both stdout and stderr into the input pipe. * We match that practice in both ex and vi for consistency. */ if (input[0] != -1) (void)dup2(input[0], STDIN_FILENO); (void)dup2(output[1], STDOUT_FILENO); (void)dup2(output[1], STDERR_FILENO); /* Close the utility's file descriptors. */ if (input[0] != -1) (void)close(input[0]); if (input[1] != -1) (void)close(input[1]); (void)close(output[0]); (void)close(output[1]); if ((name = strrchr(O_STR(sp, O_SHELL), '/')) == NULL) name = O_STR(sp, O_SHELL); else ++name; execl(O_STR(sp, O_SHELL), name, "-c", cmd, NULL); msgq_str(sp, M_SYSERR, O_STR(sp, O_SHELL), "execl: %s"); _exit (127); /* NOTREACHED */ default: /* Parent-reader, parent-writer. */ /* Close the pipe ends neither parent will use. */ if (input[0] != -1) (void)close(input[0]); (void)close(output[1]); break; } /* * FILTER_RBANG, FILTER_READ: * * Reading is the simple case -- we don't need a parent writer, * so the parent reads the output from the read end of the output * pipe until it finishes, then waits for the child. Ex_readfp * appends to the MARK, and closes ofp. * * For FILTER_RBANG, there is nothing to write to the utility. * Make sure it doesn't wait forever by closing its standard * input. * * !!! * Set the return cursor to the last line read in for FILTER_READ. * Historically, this behaves differently from ":r file" command, * which leaves the cursor at the first line read in. Check to * make sure that it's not past EOF because we were reading into an * empty file. */ if (ftype == FILTER_RBANG || ftype == FILTER_READ) { if (ftype == FILTER_RBANG) (void)close(input[1]); if (ex_readfp(sp, "filter", ofp, fm, &nread, 1)) rval = 1; sp->rptlines[L_ADDED] += nread; if (ftype == FILTER_READ) if (fm->lno == 0) rp->lno = nread; else rp->lno += nread; goto uwait; } /* * FILTER_BANG, FILTER_WRITE * * Here we need both a reader and a writer. Temporary files are * expensive and we'd like to avoid disk I/O. Using pipes has the * obvious starvation conditions. It's done as follows: * * fork * child * write lines out * exit * parent * FILTER_BANG: * read lines into the file * delete old lines * FILTER_WRITE * read and display lines * wait for child * * XXX * We get away without locking the underlying database because we know * that none of the records that we're reading will be modified until * after we've read them. This depends on the fact that the current * B+tree implementation doesn't balance pages or similar things when * it inserts new records. When the DB code has locking, we should * treat vi as if it were multiple applications sharing a database, and * do the required locking. If necessary a work-around would be to do * explicit locking in the line.c:db_get() code, based on the flag set * here. */ F_SET(sp->ep, F_MULTILOCK); switch (parent_writer_pid = fork()) { case -1: /* Error. */ msgq(sp, M_SYSERR, "fork"); (void)close(input[1]); (void)close(output[0]); rval = 1; break; case 0: /* Parent-writer. */ /* * Write the selected lines to the write end of the input * pipe. This instance of ifp is closed by ex_writefp. */ (void)close(output[0]); if ((ifp = fdopen(input[1], "w")) == NULL) _exit (1); _exit(ex_writefp(sp, "filter", ifp, fm, tm, NULL, NULL, 1)); /* NOTREACHED */ default: /* Parent-reader. */ (void)close(input[1]); if (ftype == FILTER_WRITE) { /* * Read the output from the read end of the output * pipe and display it. Filter_ldisplay closes ofp. */ if (filter_ldisplay(sp, ofp)) rval = 1; } else { /* * Read the output from the read end of the output * pipe. Ex_readfp appends to the MARK and closes * ofp. */ if (ex_readfp(sp, "filter", ofp, tm, &nread, 1)) rval = 1; sp->rptlines[L_ADDED] += nread; } /* Wait for the parent-writer. */ if (proc_wait(sp, (long)parent_writer_pid, "parent-writer", 0, 1)) rval = 1; /* Delete any lines written to the utility. */ if (rval == 0 && ftype == FILTER_BANG && (cut(sp, NULL, fm, tm, CUT_LINEMODE) || del(sp, fm, tm, 1))) { rval = 1; break; } /* * If the filter had no output, we may have just deleted * the cursor. Don't do any real error correction, we'll * try and recover later. */ if (rp->lno > 1 && !db_exist(sp, rp->lno)) --rp->lno; break; } F_CLR(sp->ep, F_MULTILOCK); /* * !!! * Ignore errors on vi file reads, to make reads prettier. It's * completely inconsistent, and historic practice. */ uwait: return (proc_wait(sp, (long)utility_pid, cmd, ftype == FILTER_READ && F_ISSET(sp, SC_VI) ? 1 : 0, 0) || rval); } /* * filter_ldisplay -- * Display output from a utility. * * !!! * Historically, the characters were passed unmodified to the terminal. * We use the ex print routines to make sure they're printable. */ static int filter_ldisplay(sp, fp) SCR *sp; FILE *fp; { size_t len; EX_PRIVATE *exp; for (exp = EXP(sp); !ex_getline(sp, fp, &len) && !INTERRUPTED(sp);) if (ex_ldisplay(sp, exp->ibp, len, 0, 0)) break; if (ferror(fp)) msgq(sp, M_SYSERR, "filter read"); (void)fclose(fp); return (0); } vigor-0.016.orig/ex/ex_global.c0100644000076400007640000001667607103707265015031 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_global.c 10.22 (Berkeley) 10/10/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" enum which {GLOBAL, V}; static int ex_g_setup __P((SCR *, EXCMD *, enum which)); /* * ex_global -- [line [,line]] g[lobal][!] /pattern/ [commands] * Exec on lines matching a pattern. * * PUBLIC: int ex_global __P((SCR *, EXCMD *)); */ int ex_global(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (ex_g_setup(sp, cmdp, FL_ISSET(cmdp->iflags, E_C_FORCE) ? V : GLOBAL)); } /* * ex_v -- [line [,line]] v /pattern/ [commands] * Exec on lines not matching a pattern. * * PUBLIC: int ex_v __P((SCR *, EXCMD *)); */ int ex_v(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (ex_g_setup(sp, cmdp, V)); } /* * ex_g_setup -- * Ex global and v commands. */ static int ex_g_setup(sp, cmdp, cmd) SCR *sp; EXCMD *cmdp; enum which cmd; { CHAR_T *ptrn, *p, *t; EXCMD *ecp; MARK abs; RANGE *rp; busy_t btype; recno_t start, end; regex_t *re; regmatch_t match[1]; size_t len; int cnt, delim, eval; char *dbp; NEEDFILE(sp, cmdp); if (F_ISSET(sp, SC_EX_GLOBAL)) { msgq(sp, M_ERR, "124|The %s command can't be used as part of a global or v command", cmdp->cmd->name); return (1); } /* * Skip leading white space. Historic vi allowed any non-alphanumeric * to serve as the global command delimiter. */ if (cmdp->argc == 0) goto usage; for (p = cmdp->argv[0]->bp; isblank(*p); ++p); if (*p == '\0' || isalnum(*p) || *p == '\\' || *p == '|' || *p == '\n') { usage: ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } delim = *p++; /* * Get the pattern string, toss escaped characters. * * QUOTING NOTE: * Only toss an escaped character if it escapes a delimiter. */ for (ptrn = t = p;;) { if (p[0] == '\0' || p[0] == delim) { if (p[0] == delim) ++p; /* * !!! * Nul terminate the pattern string -- it's passed * to regcomp which doesn't understand anything else. */ *t = '\0'; break; } if (p[0] == '\\') if (p[1] == delim) ++p; else if (p[1] == '\\') *t++ = *p++; *t++ = *p++; } /* If the pattern string is empty, use the last one. */ if (*ptrn == '\0') { if (sp->re == NULL) { ex_emsg(sp, NULL, EXM_NOPREVRE); return (1); } /* Re-compile the RE if necessary. */ if (!F_ISSET(sp, SC_RE_SEARCH) && re_compile(sp, sp->re, sp->re_len, NULL, NULL, &sp->re_c, RE_C_SEARCH)) return (1); } else { /* Compile the RE. */ if (re_compile(sp, ptrn, t - ptrn, &sp->re, &sp->re_len, &sp->re_c, RE_C_SEARCH)) return (1); /* * Set saved RE. Historic practice is that globals set * direction as well as the RE. */ sp->searchdir = FORWARD; } re = &sp->re_c; /* The global commands always set the previous context mark. */ abs.lno = sp->lno; abs.cno = sp->cno; if (mark_set(sp, ABSMARK1, &abs, 1)) return (1); /* Get an EXCMD structure. */ CALLOC_RET(sp, ecp, EXCMD *, 1, sizeof(EXCMD)); CIRCLEQ_INIT(&ecp->rq); /* * Get a copy of the command string; the default command is print. * Don't worry about a set of s with no command, that will * default to print in the ex parser. We need to have two copies * because the ex parser may step on the command string when it's * parsing it. */ if ((len = cmdp->argv[0]->len - (p - cmdp->argv[0]->bp)) == 0) { p = "pp"; len = 1; } MALLOC_RET(sp, ecp->cp, char *, len * 2); ecp->o_cp = ecp->cp; ecp->o_clen = len; memcpy(ecp->cp + len, p, len); ecp->range_lno = OOBLNO; FL_SET(ecp->agv_flags, cmd == GLOBAL ? AGV_GLOBAL : AGV_V); LIST_INSERT_HEAD(&sp->gp->ecq, ecp, q); /* * For each line... The semantics of global matching are that we first * have to decide which lines are going to get passed to the command, * and then pass them to the command, ignoring other changes. There's * really no way to do this in a single pass, since arbitrary line * creation, deletion and movement can be done in the ex command. For * example, a good vi clone test is ":g/X/mo.-3", or "g/X/.,.+1d". * What we do is create linked list of lines that are tracked through * each ex command. There's a callback routine which the DB interface * routines call when a line is created or deleted. This doesn't help * the layering much. */ btype = BUSY_ON; cnt = INTERRUPT_CHECK; for (start = cmdp->addr1.lno, end = cmdp->addr2.lno; start <= end; ++start) { if (cnt-- == 0) { if (INTERRUPTED(sp)) { LIST_REMOVE(ecp, q); free(ecp->cp); free(ecp); break; } search_busy(sp, btype); btype = BUSY_UPDATE; cnt = INTERRUPT_CHECK; } if (db_get(sp, start, DBG_FATAL, &dbp, &len)) return (1); match[0].rm_so = 0; match[0].rm_eo = len; switch (eval = regexec(&sp->re_c, dbp, 0, match, REG_STARTEND)) { case 0: if (cmd == V) continue; break; case REG_NOMATCH: if (cmd == GLOBAL) continue; break; default: re_error(sp, eval, &sp->re_c); break; } /* If follows the last entry, extend the last entry's range. */ if ((rp = ecp->rq.cqh_last) != (void *)&ecp->rq && rp->stop == start - 1) { ++rp->stop; continue; } /* Allocate a new range, and append it to the list. */ CALLOC(sp, rp, RANGE *, 1, sizeof(RANGE)); if (rp == NULL) return (1); rp->start = rp->stop = start; CIRCLEQ_INSERT_TAIL(&ecp->rq, rp, q); } search_busy(sp, BUSY_OFF); return (0); } /* * ex_g_insdel -- * Update the ranges based on an insertion or deletion. * * PUBLIC: int ex_g_insdel __P((SCR *, lnop_t, recno_t)); */ int ex_g_insdel(sp, op, lno) SCR *sp; lnop_t op; recno_t lno; { EXCMD *ecp; RANGE *nrp, *rp; /* All insert/append operations are done as inserts. */ if (op == LINE_APPEND) abort(); if (op == LINE_RESET) return (0); for (ecp = sp->gp->ecq.lh_first; ecp != NULL; ecp = ecp->q.le_next) { if (!FL_ISSET(ecp->agv_flags, AGV_AT | AGV_GLOBAL | AGV_V)) continue; for (rp = ecp->rq.cqh_first; rp != (void *)&ecp->rq; rp = nrp) { nrp = rp->q.cqe_next; /* If range less than the line, ignore it. */ if (rp->stop < lno) continue; /* * If range greater than the line, decrement or * increment the range. */ if (rp->start > lno) { if (op == LINE_DELETE) { --rp->start; --rp->stop; } else { ++rp->start; ++rp->stop; } continue; } /* * Lno is inside the range, decrement the end point * for deletion, and split the range for insertion. * In the latter case, since we're inserting a new * element, neither range can be exhausted. */ if (op == LINE_DELETE) { if (rp->start > --rp->stop) { CIRCLEQ_REMOVE(&ecp->rq, rp, q); free(rp); } } else { CALLOC_RET(sp, nrp, RANGE *, 1, sizeof(RANGE)); nrp->start = lno + 1; nrp->stop = rp->stop + 1; rp->stop = lno - 1; CIRCLEQ_INSERT_AFTER(&ecp->rq, rp, nrp, q); rp = nrp; } } /* * If the command deleted/inserted lines, the cursor moves to * the line after the deleted/inserted line. */ ecp->range_lno = lno; } return (0); } vigor-0.016.orig/ex/ex_init.c0100644000076400007640000002362107103707265014520 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_init.c 10.26 (Berkeley) 8/12/96"; #endif /* not lint */ #include #include /* XXX: param.h may not have included types.h */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "tag.h" #include "pathnames.h" enum rc { NOEXIST, NOPERM, RCOK }; static enum rc exrc_isok __P((SCR *, struct stat *, char *, int, int)); static int ex_run_file __P((SCR *, char *)); /* * ex_screen_copy -- * Copy ex screen. * * PUBLIC: int ex_screen_copy __P((SCR *, SCR *)); */ int ex_screen_copy(orig, sp) SCR *orig, *sp; { EX_PRIVATE *oexp, *nexp; /* Create the private ex structure. */ CALLOC_RET(orig, nexp, EX_PRIVATE *, 1, sizeof(EX_PRIVATE)); sp->ex_private = nexp; /* Initialize queues. */ CIRCLEQ_INIT(&nexp->tq); TAILQ_INIT(&nexp->tagfq); LIST_INIT(&nexp->cscq); if (orig == NULL) { } else { oexp = EXP(orig); if (oexp->lastbcomm != NULL && (nexp->lastbcomm = strdup(oexp->lastbcomm)) == NULL) { msgq(sp, M_SYSERR, NULL); return(1); } if (ex_tag_copy(orig, sp)) return (1); } return (0); } /* * ex_screen_end -- * End a vi screen. * * PUBLIC: int ex_screen_end __P((SCR *)); */ int ex_screen_end(sp) SCR *sp; { EX_PRIVATE *exp; int rval; if ((exp = EXP(sp)) == NULL) return (0); rval = 0; /* Close down script connections. */ if (F_ISSET(sp, SC_SCRIPT) && sscr_end(sp)) rval = 1; if (argv_free(sp)) rval = 1; if (exp->ibp != NULL) free(exp->ibp); if (exp->lastbcomm != NULL) free(exp->lastbcomm); if (ex_tag_free(sp)) rval = 1; /* Free private memory. */ free(exp); sp->ex_private = NULL; return (rval); } /* * ex_optchange -- * Handle change of options for ex. * * PUBLIC: int ex_optchange __P((SCR *, int, char *, u_long *)); */ int ex_optchange(sp, offset, str, valp) SCR *sp; int offset; char *str; u_long *valp; { switch (offset) { case O_TAGS: return (ex_tagf_alloc(sp, str)); } return (0); } /* * ex_exrc -- * Read the EXINIT environment variable and the startup exrc files, * and execute their commands. * * PUBLIC: int ex_exrc __P((SCR *)); */ int ex_exrc(sp) SCR *sp; { struct stat hsb, lsb; char *p, path[MAXPATHLEN]; /* * Source the system, environment, $HOME and local .exrc values. * Vi historically didn't check $HOME/.exrc if the environment * variable EXINIT was set. This is all done before the file is * read in, because things in the .exrc information can set, for * example, the recovery directory. * * !!! * While nvi can handle any of the options settings of historic vi, * the converse is not true. Since users are going to have to have * files and environmental variables that work with both, we use nvi * versions of both the $HOME and local startup files if they exist, * otherwise the historic ones. * * !!! * For a discussion of permissions and when what .exrc files are * read, see the comment above the exrc_isok() function below. * * !!! * If the user started the historic of vi in $HOME, vi read the user's * .exrc file twice, as $HOME/.exrc and as ./.exrc. We avoid this, as * it's going to make some commands behave oddly, and I can't imagine * anyone depending on it. */ switch (exrc_isok(sp, &hsb, _PATH_SYSEXRC, 1, 0)) { case NOEXIST: case NOPERM: break; case RCOK: if (ex_run_file(sp, _PATH_SYSEXRC)) return (1); break; } /* Run the commands. */ if (EXCMD_RUNNING(sp->gp)) (void)ex_cmd(sp); if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) return (0); if ((p = getenv("NEXINIT")) != NULL) { if (ex_run_str(sp, "NEXINIT", p, strlen(p), 1, 0)) return (1); } else if ((p = getenv("EXINIT")) != NULL) { if (ex_run_str(sp, "EXINIT", p, strlen(p), 1, 0)) return (1); } else if ((p = getenv("HOME")) != NULL && *p) { (void)snprintf(path, sizeof(path), "%s/%s", p, _PATH_NEXRC); switch (exrc_isok(sp, &hsb, path, 0, 1)) { case NOEXIST: (void)snprintf(path, sizeof(path), "%s/%s", p, _PATH_EXRC); if (exrc_isok(sp, &hsb, path, 0, 1) == RCOK && ex_run_file(sp, path)) return (1); break; case NOPERM: break; case RCOK: if (ex_run_file(sp, path)) return (1); break; } } /* Run the commands. */ if (EXCMD_RUNNING(sp->gp)) (void)ex_cmd(sp); if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) return (0); /* Previous commands may have set the exrc option. */ if (O_ISSET(sp, O_EXRC)) { switch (exrc_isok(sp, &lsb, _PATH_NEXRC, 0, 0)) { case NOEXIST: if (exrc_isok(sp, &lsb, _PATH_EXRC, 0, 0) == RCOK && (lsb.st_dev != hsb.st_dev || lsb.st_ino != hsb.st_ino) && ex_run_file(sp, _PATH_EXRC)) return (1); break; case NOPERM: break; case RCOK: if ((lsb.st_dev != hsb.st_dev || lsb.st_ino != hsb.st_ino) && ex_run_file(sp, _PATH_NEXRC)) return (1); break; } /* Run the commands. */ if (EXCMD_RUNNING(sp->gp)) (void)ex_cmd(sp); if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) return (0); } return (0); } /* * ex_run_file -- * Set up a file of ex commands to run. */ static int ex_run_file(sp, name) SCR *sp; char *name; { ARGS *ap[2], a; EXCMD cmd; ex_cinit(&cmd, C_SOURCE, 0, OOBLNO, OOBLNO, 0, ap); ex_cadd(&cmd, &a, name, strlen(name)); return (ex_source(sp, &cmd)); } /* * ex_run_str -- * Set up a string of ex commands to run. * * PUBLIC: int ex_run_str __P((SCR *, char *, char *, size_t, int, int)); */ int ex_run_str(sp, name, str, len, ex_flags, nocopy) SCR *sp; char *name, *str; size_t len; int ex_flags, nocopy; { GS *gp; EXCMD *ecp; gp = sp->gp; if (EXCMD_RUNNING(gp)) { CALLOC_RET(sp, ecp, EXCMD *, 1, sizeof(EXCMD)); LIST_INSERT_HEAD(&gp->ecq, ecp, q); } else ecp = &gp->excmd; F_INIT(ecp, ex_flags ? E_BLIGNORE | E_NOAUTO | E_NOPRDEF | E_VLITONLY : 0); if (nocopy) ecp->cp = str; else if ((ecp->cp = v_strdup(sp, str, len)) == NULL) return (1); ecp->clen = len; if (name == NULL) ecp->if_name = NULL; else { if ((ecp->if_name = v_strdup(sp, name, strlen(name))) == NULL) return (1); ecp->if_lno = 1; F_SET(ecp, E_NAMEDISCARD); } return (0); } /* * exrc_isok -- * Check a .exrc file for source-ability. * * !!! * Historically, vi read the $HOME and local .exrc files if they were owned * by the user's real ID, or the "sourceany" option was set, regardless of * any other considerations. We no longer support the sourceany option as * it's a security problem of mammoth proportions. We require the system * .exrc file to be owned by root, the $HOME .exrc file to be owned by the * user's effective ID (or that the user's effective ID be root) and the * local .exrc files to be owned by the user's effective ID. In all cases, * the file cannot be writeable by anyone other than its owner. * * In O'Reilly ("Learning the VI Editor", Fifth Ed., May 1992, page 106), * it notes that System V release 3.2 and later has an option "[no]exrc". * The behavior is that local .exrc files are read only if the exrc option * is set. The default for the exrc option was off, so, by default, local * .exrc files were not read. The problem this was intended to solve was * that System V permitted users to give away files, so there's no possible * ownership or writeability test to ensure that the file is safe. * * POSIX 1003.2-1992 standardized exrc as an option. It required the exrc * option to be off by default, thus local .exrc files are not to be read * by default. The Rationale noted (incorrectly) that this was a change * to historic practice, but correctly noted that a default of off improves * system security. POSIX also required that vi check the effective user * ID instead of the real user ID, which is why we've switched from historic * practice. * * We initialize the exrc variable to off. If it's turned on by the system * or $HOME .exrc files, and the local .exrc file passes the ownership and * writeability tests, then we read it. This breaks historic 4BSD practice, * but it gives us a measure of security on systems where users can give away * files. */ static enum rc exrc_isok(sp, sbp, path, rootown, rootid) SCR *sp; struct stat *sbp; char *path; int rootown, rootid; { enum { ROOTOWN, OWN, WRITER } etype; uid_t euid; int nf1, nf2; char *a, *b, buf[MAXPATHLEN]; /* Check for the file's existence. */ if (stat(path, sbp)) return (NOEXIST); /* Check ownership permissions. */ euid = geteuid(); if (!(rootown && sbp->st_uid == 0) && !(rootid && euid == 0) && sbp->st_uid != euid) { etype = rootown ? ROOTOWN : OWN; goto denied; } /* Check writeability. */ if (sbp->st_mode & (S_IWGRP | S_IWOTH)) { etype = WRITER; goto denied; } return (RCOK); denied: a = msg_print(sp, path, &nf1); if (strchr(path, '/') == NULL && getcwd(buf, sizeof(buf)) != NULL) { b = msg_print(sp, buf, &nf2); switch (etype) { case ROOTOWN: msgq(sp, M_ERR, "125|%s/%s: not sourced: not owned by you or root", b, a); break; case OWN: msgq(sp, M_ERR, "126|%s/%s: not sourced: not owned by you", b, a); break; case WRITER: msgq(sp, M_ERR, "127|%s/%s: not sourced: writeable by a user other than the owner", b, a); break; } if (nf2) FREE_SPACE(sp, b, 0); } else switch (etype) { case ROOTOWN: msgq(sp, M_ERR, "128|%s: not sourced: not owned by you or root", a); break; case OWN: msgq(sp, M_ERR, "129|%s: not sourced: not owned by you", a); break; case WRITER: msgq(sp, M_ERR, "130|%s: not sourced: writeable by a user other than the owner", a); break; } if (nf1) FREE_SPACE(sp, a, 0); return (NOPERM); } vigor-0.016.orig/ex/ex_equal.c0100644000076400007640000000242507103707265014663 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_equal.c 10.10 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" /* * ex_equal -- :address = * * PUBLIC: int ex_equal __P((SCR *, EXCMD *)); */ int ex_equal(sp, cmdp) SCR *sp; EXCMD *cmdp; { recno_t lno; NEEDFILE(sp, cmdp); /* * Print out the line number matching the specified address, * or the number of the last line in the file if no address * specified. * * !!! * Historically, ":0=" displayed 0, and ":=" or ":1=" in an * empty file displayed 1. Until somebody complains loudly, * we're going to do it right. The tables in excmd.c permit * lno to get away with any address from 0 to the end of the * file, which, in an empty file, is 0. */ if (F_ISSET(cmdp, E_ADDR_DEF)) { if (db_last(sp, &lno)) return (1); } else lno = cmdp->addr1.lno; (void)ex_printf(sp, "%ld\n", lno); return (0); } vigor-0.016.orig/ex/ex_file.c0100644000076400007640000000314007103707265014466 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_file.c 10.12 (Berkeley) 7/12/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_file -- :f[ile] [name] * Change the file's name and display the status line. * * PUBLIC: int ex_file __P((SCR *, EXCMD *)); */ int ex_file(sp, cmdp) SCR *sp; EXCMD *cmdp; { CHAR_T *p; FREF *frp; NEEDFILE(sp, cmdp); switch (cmdp->argc) { case 0: break; case 1: frp = sp->frp; /* Make sure can allocate enough space. */ if ((p = v_strdup(sp, cmdp->argv[0]->bp, cmdp->argv[0]->len)) == NULL) return (1); /* If already have a file name, it becomes the alternate. */ if (!F_ISSET(frp, FR_TMPFILE)) set_alt_name(sp, frp->name); /* Free the previous name. */ free(frp->name); frp->name = p; /* * The file has a real name, it's no longer a temporary, * clear the temporary file flags. */ F_CLR(frp, FR_TMPEXIT | FR_TMPFILE); /* Have to force a write if the file exists, next time. */ F_SET(frp, FR_NAMECHANGE); /* Notify the screen. */ (void)sp->gp->scr_rename(sp, sp->frp->name, 1); break; default: abort(); } msgq_status(sp, sp->lno, MSTAT_SHOWLAST); return (0); } vigor-0.016.orig/ex/ex_join.c0100644000076400007640000001117407103707265014514 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_join.c 10.10 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_join -- :[line [,line]] j[oin][!] [count] [flags] * Join lines. * * PUBLIC: int ex_join __P((SCR *, EXCMD *)); */ int ex_join(sp, cmdp) SCR *sp; EXCMD *cmdp; { recno_t from, to; size_t blen, clen, len, tlen; int echar, extra, first; char *bp, *p, *tbp; NEEDFILE(sp, cmdp); from = cmdp->addr1.lno; to = cmdp->addr2.lno; /* Check for no lines to join. */ if (!db_exist(sp, from + 1)) { msgq(sp, M_ERR, "131|No following lines to join"); return (1); } GET_SPACE_RET(sp, bp, blen, 256); /* * The count for the join command was off-by-one, * historically, to other counts for other commands. */ if (FL_ISSET(cmdp->iflags, E_C_COUNT)) ++cmdp->addr2.lno; /* * If only a single address specified, or, the same address * specified twice, the from/two addresses will be the same. */ if (cmdp->addr1.lno == cmdp->addr2.lno) ++cmdp->addr2.lno; clen = tlen = 0; for (first = 1, from = cmdp->addr1.lno, to = cmdp->addr2.lno; from <= to; ++from) { /* * Get next line. Historic versions of vi allowed "10J" while * less than 10 lines from the end-of-file, so we do too. */ if (db_get(sp, from, 0, &p, &len)) { cmdp->addr2.lno = from - 1; break; } /* Empty lines just go away. */ if (len == 0) continue; /* * Get more space if necessary. Note, tlen isn't the length * of the new line, it's roughly the amount of space needed. * tbp - bp is the length of the new line. */ tlen += len + 2; ADD_SPACE_RET(sp, bp, blen, tlen); tbp = bp + clen; /* * Historic practice: * * If force specified, join without modification. * If the current line ends with whitespace, strip leading * whitespace from the joined line. * If the next line starts with a ), do nothing. * If the current line ends with ., insert two spaces. * Else, insert one space. * * One change -- add ? and ! to the list of characters for * which we insert two spaces. I expect that POSIX 1003.2 * will require this as well. * * Echar is the last character in the last line joined. */ extra = 0; if (!first && !FL_ISSET(cmdp->iflags, E_C_FORCE)) { if (isblank(echar)) for (; len && isblank(*p); --len, ++p); else if (p[0] != ')') { if (strchr(".?!", echar)) { *tbp++ = ' '; ++clen; extra = 1; } *tbp++ = ' '; ++clen; for (; len && isblank(*p); --len, ++p); } } if (len != 0) { memcpy(tbp, p, len); tbp += len; clen += len; echar = p[len - 1]; } else echar = ' '; /* * Historic practice for vi was to put the cursor at the first * inserted whitespace character, if there was one, or the * first character of the joined line, if there wasn't, or the * last character of the line if joined to an empty line. If * a count was specified, the cursor was moved as described * for the first line joined, ignoring subsequent lines. If * the join was a ':' command, the cursor was placed at the * first non-blank character of the line unless the cursor was * "attracted" to the end of line when the command was executed * in which case it moved to the new end of line. There are * probably several more special cases, but frankly, my dear, * I don't give a damn. This implementation puts the cursor * on the first inserted whitespace character, the first * character of the joined line, or the last character of the * line regardless. Note, if the cursor isn't on the joined * line (possible with : commands), it is reset to the starting * line. */ if (first) { sp->cno = (tbp - bp) - (1 + extra); first = 0; } else sp->cno = (tbp - bp) - len - (1 + extra); } sp->lno = cmdp->addr1.lno; /* Delete the joined lines. */ for (from = cmdp->addr1.lno, to = cmdp->addr2.lno; to > from; --to) if (db_delete(sp, to)) goto err; /* If the original line changed, reset it. */ if (!first && db_set(sp, from, bp, tbp - bp)) { err: FREE_SPACE(sp, bp, blen); return (1); } FREE_SPACE(sp, bp, blen); sp->rptlines[L_JOINED] += (cmdp->addr2.lno - cmdp->addr1.lno) + 1; return (0); } vigor-0.016.orig/ex/ex_map.c0100644000076400007640000000620007103707265014324 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_map.c 10.9 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_map -- :map[!] [input] [replacement] * Map a key/string or display mapped keys. * * Historical note: * Historic vi maps were fairly bizarre, and likely to differ in * very subtle and strange ways from this implementation. Two * things worth noting are that vi would often hang or drop core * if the map was strange enough (ex: map X "xy$@x^V), or, simply * not work. One trick worth remembering is that if you put a * mark at the start of the map, e.g. map X mx"xy ...), or if you * put the map in a .exrc file, things would often work much better. * No clue why. * * PUBLIC: int ex_map __P((SCR *, EXCMD *)); */ int ex_map(sp, cmdp) SCR *sp; EXCMD *cmdp; { seq_t stype; CHAR_T *input, *p; stype = FL_ISSET(cmdp->iflags, E_C_FORCE) ? SEQ_INPUT : SEQ_COMMAND; switch (cmdp->argc) { case 0: if (seq_dump(sp, stype, 1) == 0) msgq(sp, M_INFO, stype == SEQ_INPUT ? "132|No input map entries" : "133|No command map entries"); return (0); case 2: input = cmdp->argv[0]->bp; break; default: abort(); } /* * If the mapped string is #[0-9]* (and wasn't quoted) then store the * function key mapping. If the screen specific routine has been set, * call it as well. Note, the SEQ_FUNCMAP type is persistent across * screen types, maybe the next screen type will get it right. */ if (input[0] == '#' && isdigit(input[1])) { for (p = input + 2; isdigit(*p); ++p); if (p[0] != '\0') goto nofunc; if (seq_set(sp, NULL, 0, input, cmdp->argv[0]->len, cmdp->argv[1]->bp, cmdp->argv[1]->len, stype, SEQ_FUNCMAP | SEQ_USERDEF)) return (1); return (sp->gp->scr_fmap == NULL ? 0 : sp->gp->scr_fmap(sp, stype, input, cmdp->argv[0]->len, cmdp->argv[1]->bp, cmdp->argv[1]->len)); } /* Some single keys may not be remapped in command mode. */ nofunc: if (stype == SEQ_COMMAND && input[1] == '\0') switch (KEY_VAL(sp, input[0])) { case K_COLON: case K_ESCAPE: case K_NL: msgq(sp, M_ERR, "134|The %s character may not be remapped", KEY_NAME(sp, input[0])); return (1); } return (seq_set(sp, NULL, 0, input, cmdp->argv[0]->len, cmdp->argv[1]->bp, cmdp->argv[1]->len, stype, SEQ_USERDEF)); } /* * ex_unmap -- (:unmap[!] key) * Unmap a key. * * PUBLIC: int ex_unmap __P((SCR *, EXCMD *)); */ int ex_unmap(sp, cmdp) SCR *sp; EXCMD *cmdp; { if (seq_delete(sp, cmdp->argv[0]->bp, cmdp->argv[0]->len, FL_ISSET(cmdp->iflags, E_C_FORCE) ? SEQ_INPUT : SEQ_COMMAND)) { msgq_str(sp, M_INFO, cmdp->argv[0]->bp, "135|\"%s\" isn't currently mapped"); return (1); } return (0); } vigor-0.016.orig/ex/ex_mark.c0100644000076400007640000000157007103707265014506 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_mark.c 10.8 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" /* * ex_mark -- :mark char * :k char * Mark lines. * * * PUBLIC: int ex_mark __P((SCR *, EXCMD *)); */ int ex_mark(sp, cmdp) SCR *sp; EXCMD *cmdp; { NEEDFILE(sp, cmdp); if (cmdp->argv[0]->len != 1) { msgq(sp, M_ERR, "136|Mark names must be a single character"); return (1); } return (mark_set(sp, cmdp->argv[0]->bp[0], &cmdp->addr1, 1)); } vigor-0.016.orig/ex/ex_mkexrc.c0100644000076400007640000000402207103707265015040 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_mkexrc.c 10.11 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "pathnames.h" /* * ex_mkexrc -- :mkexrc[!] [file] * * Create (or overwrite) a .exrc file with the current info. * * PUBLIC: int ex_mkexrc __P((SCR *, EXCMD *)); */ int ex_mkexrc(sp, cmdp) SCR *sp; EXCMD *cmdp; { struct stat sb; FILE *fp; int fd, sverrno; char *fname; switch (cmdp->argc) { case 0: fname = _PATH_EXRC; break; case 1: fname = cmdp->argv[0]->bp; set_alt_name(sp, fname); break; default: abort(); } if (!FL_ISSET(cmdp->iflags, E_C_FORCE) && !stat(fname, &sb)) { msgq_str(sp, M_ERR, fname, "137|%s exists, not written; use ! to override"); return (1); } /* Create with max permissions of rw-r--r--. */ if ((fd = open(fname, O_CREAT | O_TRUNC | O_WRONLY, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) < 0) { msgq_str(sp, M_SYSERR, fname, "%s"); return (1); } if ((fp = fdopen(fd, "w")) == NULL) { sverrno = errno; (void)close(fd); goto e2; } if (seq_save(sp, fp, "abbreviate ", SEQ_ABBREV) || ferror(fp)) goto e1; if (seq_save(sp, fp, "map ", SEQ_COMMAND) || ferror(fp)) goto e1; if (seq_save(sp, fp, "map! ", SEQ_INPUT) || ferror(fp)) goto e1; if (opts_save(sp, fp) || ferror(fp)) goto e1; if (fclose(fp)) { sverrno = errno; goto e2; } msgq_str(sp, M_INFO, fname, "138|New exrc file: %s"); return (0); e1: sverrno = errno; (void)fclose(fp); e2: errno = sverrno; msgq_str(sp, M_SYSERR, fname, "%s"); return (1); } vigor-0.016.orig/ex/ex.awk0100644000076400007640000000016307103707266014032 0ustar cjw44cjw44# @(#)ex.awk 10.1 (Berkeley) 6/8/95 /^\/\* C_[0-9A-Z_]* \*\/$/ { printf("#define %s %d\n", $2, cnt++); next; } vigor-0.016.orig/ex/ex_move.c0100644000076400007640000001066507103707265014527 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_move.c 10.10 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_copy -- :[line [,line]] co[py] line [flags] * Copy selected lines. * * PUBLIC: int ex_copy __P((SCR *, EXCMD *)); */ int ex_copy(sp, cmdp) SCR *sp; EXCMD *cmdp; { CB cb; MARK fm1, fm2, m, tm; recno_t cnt; int rval; rval = 0; NEEDFILE(sp, cmdp); /* * It's possible to copy things into the area that's being * copied, e.g. "2,5copy3" is legitimate. Save the text to * a cut buffer. */ fm1 = cmdp->addr1; fm2 = cmdp->addr2; memset(&cb, 0, sizeof(cb)); CIRCLEQ_INIT(&cb.textq); for (cnt = fm1.lno; cnt <= fm2.lno; ++cnt) if (cut_line(sp, cnt, 0, 0, &cb)) { rval = 1; goto err; } cb.flags |= CB_LMODE; /* Put the text into place. */ tm.lno = cmdp->lineno; tm.cno = 0; if (put(sp, &cb, NULL, &tm, &m, 1)) rval = 1; else { /* * Copy puts the cursor on the last line copied. The cursor * returned by the put routine is the first line put, not the * last, because that's the historic semantic of vi. */ cnt = (fm2.lno - fm1.lno) + 1; sp->lno = m.lno + (cnt - 1); sp->cno = 0; } err: text_lfree(&cb.textq); return (rval); } /* * ex_move -- :[line [,line]] mo[ve] line * Move selected lines. * * PUBLIC: int ex_move __P((SCR *, EXCMD *)); */ int ex_move(sp, cmdp) SCR *sp; EXCMD *cmdp; { LMARK *lmp; MARK fm1, fm2; recno_t cnt, diff, fl, tl, mfl, mtl; size_t blen, len; int mark_reset; char *bp, *p; NEEDFILE(sp, cmdp); /* * It's not possible to move things into the area that's being * moved. */ fm1 = cmdp->addr1; fm2 = cmdp->addr2; if (cmdp->lineno >= fm1.lno && cmdp->lineno <= fm2.lno) { msgq(sp, M_ERR, "139|Destination line is inside move range"); return (1); } /* * Log the positions of any marks in the to-be-deleted lines. This * has to work with the logging code. What happens is that we log * the old mark positions, make the changes, then log the new mark * positions. Then the marks end up in the right positions no matter * which way the log is traversed. * * XXX * Reset the MARK_USERSET flag so that the log can undo the mark. * This isn't very clean, and should probably be fixed. */ fl = fm1.lno; tl = cmdp->lineno; /* Log the old positions of the marks. */ mark_reset = 0; for (lmp = sp->ep->marks.lh_first; lmp != NULL; lmp = lmp->q.le_next) if (lmp->name != ABSMARK1 && lmp->lno >= fl && lmp->lno <= tl) { mark_reset = 1; F_CLR(lmp, MARK_USERSET); (void)log_mark(sp, lmp); } /* Get memory for the copy. */ GET_SPACE_RET(sp, bp, blen, 256); /* Move the lines. */ diff = (fm2.lno - fm1.lno) + 1; if (tl > fl) { /* Destination > source. */ mfl = tl - diff; mtl = tl; for (cnt = diff; cnt--;) { if (db_get(sp, fl, DBG_FATAL, &p, &len)) return (1); BINC_RET(sp, bp, blen, len); memcpy(bp, p, len); if (db_append(sp, 1, tl, bp, len)) return (1); if (mark_reset) for (lmp = sp->ep->marks.lh_first; lmp != NULL; lmp = lmp->q.le_next) if (lmp->name != ABSMARK1 && lmp->lno == fl) lmp->lno = tl + 1; if (db_delete(sp, fl)) return (1); } } else { /* Destination < source. */ mfl = tl; mtl = tl + diff; for (cnt = diff; cnt--;) { if (db_get(sp, fl, DBG_FATAL, &p, &len)) return (1); BINC_RET(sp, bp, blen, len); memcpy(bp, p, len); if (db_append(sp, 1, tl++, bp, len)) return (1); if (mark_reset) for (lmp = sp->ep->marks.lh_first; lmp != NULL; lmp = lmp->q.le_next) if (lmp->name != ABSMARK1 && lmp->lno == fl) lmp->lno = tl; ++fl; if (db_delete(sp, fl)) return (1); } } FREE_SPACE(sp, bp, blen); sp->lno = tl; /* Last line moved. */ sp->cno = 0; /* Log the new positions of the marks. */ if (mark_reset) for (lmp = sp->ep->marks.lh_first; lmp != NULL; lmp = lmp->q.le_next) if (lmp->name != ABSMARK1 && lmp->lno >= mfl && lmp->lno <= mtl) (void)log_mark(sp, lmp); sp->rptlines[L_MOVED] += diff; return (0); } vigor-0.016.orig/ex/ex_preserve.c0100644000076400007640000000370107103707265015405 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_preserve.c 10.12 (Berkeley) 4/27/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_preserve -- :pre[serve] * Push the file to recovery. * * PUBLIC: int ex_preserve __P((SCR *, EXCMD *)); */ int ex_preserve(sp, cmdp) SCR *sp; EXCMD *cmdp; { recno_t lno; NEEDFILE(sp, cmdp); if (!F_ISSET(sp->ep, F_RCV_ON)) { msgq(sp, M_ERR, "142|Preservation of this file not possible"); return (1); } /* If recovery not initialized, do so. */ if (F_ISSET(sp->ep, F_FIRSTMODIFY) && rcv_init(sp)) return (1); /* Force the file to be read in, in case it hasn't yet. */ if (db_last(sp, &lno)) return (1); /* Sync to disk. */ if (rcv_sync(sp, RCV_SNAPSHOT)) return (1); msgq(sp, M_INFO, "143|File preserved"); return (0); } /* * ex_recover -- :rec[over][!] file * Recover the file. * * PUBLIC: int ex_recover __P((SCR *, EXCMD *)); */ int ex_recover(sp, cmdp) SCR *sp; EXCMD *cmdp; { ARGS *ap; FREF *frp; ap = cmdp->argv[0]; /* Set the alternate file name. */ set_alt_name(sp, ap->bp); /* * Check for modifications. Autowrite did not historically * affect :recover. */ if (file_m2(sp, FL_ISSET(cmdp->iflags, E_C_FORCE))) return (1); /* Get a file structure for the file. */ if ((frp = file_add(sp, ap->bp)) == NULL) return (1); /* Set the recover bit. */ F_SET(frp, FR_RECOVER); /* Switch files. */ if (file_init(sp, frp, NULL, FS_SETALT | (FL_ISSET(cmdp->iflags, E_C_FORCE) ? FS_FORCE : 0))) return (1); F_SET(sp, SC_FSWITCH); return (0); } vigor-0.016.orig/ex/ex_open.c0100644000076400007640000000171007103707265014511 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_open.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" /* * ex_open -- :[line] o[pen] [/pattern/] [flags] * * Switch to single line "open" mode. * * PUBLIC: int ex_open __P((SCR *, EXCMD *)); */ int ex_open(sp, cmdp) SCR *sp; EXCMD *cmdp; { /* If open option off, disallow open command. */ if (!O_ISSET(sp, O_OPEN)) { msgq(sp, M_ERR, "140|The open command requires that the open option be set"); return (1); } msgq(sp, M_ERR, "141|The open command is not yet implemented"); return (1); } vigor-0.016.orig/ex/ex_perl.c0100644000076400007640000000316107103707265014514 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * Copyright (c) 1995 * George V. Neville-Neil. All rights reserved. * Copyright (c) 1996 * Sven Verdoolaege. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_perl.c 8.10 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_perl -- :[line [,line]] perl [command] * Run a command through the perl interpreter. * * ex_perldo -- :[line [,line]] perldo [command] * Run a set of lines through the perl interpreter. * * PUBLIC: int ex_perl __P((SCR*, EXCMD *)); */ int ex_perl(sp, cmdp) SCR *sp; EXCMD *cmdp; { #ifdef HAVE_PERL_INTERP CHAR_T *p; size_t len; /* Skip leading white space. */ if (cmdp->argc != 0) for (p = cmdp->argv[0]->bp, len = cmdp->argv[0]->len; len > 0; --len, ++p) if (!isblank(*p)) break; if (cmdp->argc == 0 || len == 0) { ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } return (cmdp->cmd == &cmds[C_PERLCMD] ? perl_ex_perl(sp, p, len, cmdp->addr1.lno, cmdp->addr2.lno) : perl_ex_perldo(sp, p, len, cmdp->addr1.lno, cmdp->addr2.lno)); #else msgq(sp, M_ERR, "306|Vi was not loaded with a Perl interpreter"); return (1); #endif } vigor-0.016.orig/ex/ex_quit.c0100644000076400007640000000173207103707265014536 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_quit.c 10.7 (Berkeley) 4/27/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" /* * ex_quit -- :quit[!] * Quit. * * PUBLIC: int ex_quit __P((SCR *, EXCMD *)); */ int ex_quit(sp, cmdp) SCR *sp; EXCMD *cmdp; { int force; force = FL_ISSET(cmdp->iflags, E_C_FORCE); /* Check for file modifications, or more files to edit. */ if (file_m2(sp, force) || ex_ncheck(sp, force)) return (1); vigor_confirm("\"Don't go! The text needs you! It depends on you!\"", sp->gp); F_SET(sp, force ? SC_EXIT_FORCE : SC_EXIT); return (0); } vigor-0.016.orig/ex/ex_read.c0100644000076400007640000002001107103707265014456 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_read.c 10.38 (Berkeley) 8/12/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" /* * ex_read -- :read [file] * :read [!cmd] * Read from a file or utility. * * !!! * Historical vi wouldn't undo a filter read, for no apparent reason. * * PUBLIC: int ex_read __P((SCR *, EXCMD *)); */ int ex_read(sp, cmdp) SCR *sp; EXCMD *cmdp; { enum { R_ARG, R_EXPANDARG, R_FILTER } which; struct stat sb; CHAR_T *arg, *name; EX_PRIVATE *exp; FILE *fp; FREF *frp; GS *gp; MARK rm; recno_t nlines; size_t arglen; int argc, rval; char *p; gp = sp->gp; /* * 0 args: read the current pathname. * 1 args: check for "read !arg". */ switch (cmdp->argc) { case 0: which = R_ARG; break; case 1: arg = cmdp->argv[0]->bp; arglen = cmdp->argv[0]->len; if (*arg == '!') { ++arg; --arglen; which = R_FILTER; /* Secure means no shell access. */ if (O_ISSET(sp, O_SECURE)) { ex_emsg(sp, cmdp->cmd->name, EXM_SECURE_F); return (1); } } else which = R_EXPANDARG; break; default: abort(); /* NOTREACHED */ } /* Load a temporary file if no file being edited. */ if (sp->ep == NULL) { if ((frp = file_add(sp, NULL)) == NULL) return (1); if (file_init(sp, frp, NULL, 0)) return (1); } switch (which) { case R_FILTER: /* * File name and bang expand the user's argument. If * we don't get an additional argument, it's illegal. */ argc = cmdp->argc; if (argv_exp1(sp, cmdp, arg, arglen, 1)) return (1); if (argc == cmdp->argc) { ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } argc = cmdp->argc - 1; /* Set the last bang command. */ exp = EXP(sp); if (exp->lastbcomm != NULL) free(exp->lastbcomm); if ((exp->lastbcomm = strdup(cmdp->argv[argc]->bp)) == NULL) { msgq(sp, M_SYSERR, NULL); return (1); } /* * Vi redisplayed the user's argument if it changed, ex * always displayed a !, plus the user's argument if it * changed. */ if (F_ISSET(sp, SC_VI)) { if (F_ISSET(cmdp, E_MODIFY)) (void)vs_update(sp, "!", cmdp->argv[argc]->bp); } else { if (F_ISSET(cmdp, E_MODIFY)) (void)ex_printf(sp, "!%s\n", cmdp->argv[argc]->bp); else (void)ex_puts(sp, "!\n"); (void)ex_fflush(sp); } /* * Historically, filter reads as the first ex command didn't * wait for the user. If SC_SCR_EXWROTE not already set, set * the don't-wait flag. */ if (!F_ISSET(sp, SC_SCR_EXWROTE)) F_SET(sp, SC_EX_WAIT_NO); /* * Switch into ex canonical mode. The reason to restore the * original terminal modes for read filters is so that users * can do things like ":r! cat /dev/tty". * * !!! * We do not output an extra , so that we don't touch * the screen on a normal read. */ if (F_ISSET(sp, SC_VI)) { if (gp->scr_screen(sp, SC_EX)) { ex_emsg(sp, cmdp->cmd->name, EXM_NOCANON_F); return (1); } /* * !!! * Historically, the read command doesn't switch to * the alternate X11 xterm screen, if doing a filter * read -- don't set SA_ALTERNATE. */ F_SET(sp, SC_SCR_EX | SC_SCR_EXWROTE); } if (ex_filter(sp, cmdp, &cmdp->addr1, NULL, &rm, cmdp->argv[argc]->bp, FILTER_READ)) return (1); /* The filter version of read set the autoprint flag. */ F_SET(cmdp, E_AUTOPRINT); /* * If in vi mode, move to the first nonblank. Might have * switched into ex mode, so saved the original SC_VI value. */ sp->lno = rm.lno; if (F_ISSET(sp, SC_VI)) { sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); } return (0); case R_ARG: name = sp->frp->name; break; case R_EXPANDARG: if (argv_exp2(sp, cmdp, arg, arglen)) return (1); /* * 0 args: impossible. * 1 args: impossible (I hope). * 2 args: read it. * >2 args: object, too many args. * * The 1 args case depends on the argv_sexp() function refusing * to return success without at least one non-blank character. */ switch (cmdp->argc) { case 0: case 1: abort(); /* NOTREACHED */ case 2: name = cmdp->argv[1]->bp; /* * !!! * Historically, the read and write commands renamed * "unnamed" files, or, if the file had a name, set * the alternate file name. */ if (F_ISSET(sp->frp, FR_TMPFILE) && !F_ISSET(sp->frp, FR_EXNAMED)) { if ((p = v_strdup(sp, cmdp->argv[1]->bp, cmdp->argv[1]->len)) != NULL) { free(sp->frp->name); sp->frp->name = p; } /* * The file has a real name, it's no longer a * temporary, clear the temporary file flags. */ F_CLR(sp->frp, FR_TMPEXIT | FR_TMPFILE); F_SET(sp->frp, FR_NAMECHANGE | FR_EXNAMED); /* Notify the screen. */ (void)sp->gp->scr_rename(sp, sp->frp->name, 1); } else set_alt_name(sp, name); break; default: ex_emsg(sp, cmdp->argv[0]->bp, EXM_FILECOUNT); return (1); } break; } /* * !!! * Historically, vi did not permit reads from non-regular files, nor * did it distinguish between "read !" and "read!", so there was no * way to "force" it. We permit reading from named pipes too, since * they didn't exist when the original implementation of vi was done * and they seem a reasonable addition. */ if ((fp = fopen(name, "r")) == NULL || fstat(fileno(fp), &sb)) { msgq_str(sp, M_SYSERR, name, "%s"); return (1); } if (!S_ISFIFO(sb.st_mode) && !S_ISREG(sb.st_mode)) { (void)fclose(fp); msgq(sp, M_ERR, "145|Only regular files and named pipes may be read"); return (1); } /* Try and get a lock. */ if (file_lock(sp, NULL, NULL, fileno(fp), 0) == LOCK_UNAVAIL) msgq(sp, M_ERR, "146|%s: read lock was unavailable", name); rval = ex_readfp(sp, name, fp, &cmdp->addr1, &nlines, 0); /* * In vi, set the cursor to the first line read in, if anything read * in, otherwise, the address. (Historic vi set it to the line after * the address regardless, but since that line may not exist we don't * bother.) * * In ex, set the cursor to the last line read in, if anything read in, * otherwise, the address. */ if (F_ISSET(sp, SC_VI)) { sp->lno = cmdp->addr1.lno; if (nlines) ++sp->lno; } else sp->lno = cmdp->addr1.lno + nlines; return (rval); } /* * ex_readfp -- * Read lines into the file. * * PUBLIC: int ex_readfp __P((SCR *, char *, FILE *, MARK *, recno_t *, int)); */ int ex_readfp(sp, name, fp, fm, nlinesp, silent) SCR *sp; char *name; FILE *fp; MARK *fm; recno_t *nlinesp; int silent; { EX_PRIVATE *exp; GS *gp; recno_t lcnt, lno; size_t len; u_long ccnt; /* XXX: can't print off_t portably. */ int nf, rval; char *p; gp = sp->gp; exp = EXP(sp); /* * Add in the lines from the output. Insertion starts at the line * following the address. */ ccnt = 0; lcnt = 0; p = "147|Reading..."; for (lno = fm->lno; !ex_getline(sp, fp, &len); ++lno, ++lcnt) { if ((lcnt + 1) % INTERRUPT_CHECK == 0) { if (INTERRUPTED(sp)) break; if (!silent) { gp->scr_busy(sp, p, p == NULL ? BUSY_UPDATE : BUSY_ON); p = NULL; } } if (db_append(sp, 1, lno, exp->ibp, len)) goto err; ccnt += len; } if (ferror(fp) || fclose(fp)) goto err; /* Return the number of lines read in. */ if (nlinesp != NULL) *nlinesp = lcnt; if (!silent) { p = msg_print(sp, name, &nf); msgq(sp, M_INFO, "148|%s: %lu lines, %lu characters", p, lcnt, ccnt); if (nf) FREE_SPACE(sp, p, 0); } rval = 0; if (0) { err: msgq_str(sp, M_SYSERR, name, "%s"); (void)fclose(fp); rval = 1; } if (!silent) gp->scr_busy(sp, NULL, BUSY_OFF); return (rval); } vigor-0.016.orig/ex/ex_print.c0100644000076400007640000001524707103707265014716 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_print.c 10.18 (Berkeley) 5/12/96"; #endif /* not lint */ #include #include #include #include #include #include #include #ifdef __STDC__ #include #else #include #endif #include "../common/common.h" static int ex_prchars __P((SCR *, const char *, size_t *, size_t, u_int, int)); /* * ex_list -- :[line [,line]] l[ist] [count] [flags] * * Display the addressed lines such that the output is unambiguous. * * PUBLIC: int ex_list __P((SCR *, EXCMD *)); */ int ex_list(sp, cmdp) SCR *sp; EXCMD *cmdp; { if (ex_print(sp, cmdp, &cmdp->addr1, &cmdp->addr2, cmdp->iflags | E_C_LIST)) return (1); sp->lno = cmdp->addr2.lno; sp->cno = cmdp->addr2.cno; return (0); } /* * ex_number -- :[line [,line]] nu[mber] [count] [flags] * * Display the addressed lines with a leading line number. * * PUBLIC: int ex_number __P((SCR *, EXCMD *)); */ int ex_number(sp, cmdp) SCR *sp; EXCMD *cmdp; { if (ex_print(sp, cmdp, &cmdp->addr1, &cmdp->addr2, cmdp->iflags | E_C_HASH)) return (1); sp->lno = cmdp->addr2.lno; sp->cno = cmdp->addr2.cno; return (0); } /* * ex_pr -- :[line [,line]] p[rint] [count] [flags] * * Display the addressed lines. * * PUBLIC: int ex_pr __P((SCR *, EXCMD *)); */ int ex_pr(sp, cmdp) SCR *sp; EXCMD *cmdp; { if (ex_print(sp, cmdp, &cmdp->addr1, &cmdp->addr2, cmdp->iflags)) return (1); sp->lno = cmdp->addr2.lno; sp->cno = cmdp->addr2.cno; return (0); } /* * ex_print -- * Print the selected lines. * * PUBLIC: int ex_print __P((SCR *, EXCMD *, MARK *, MARK *, u_int32_t)); */ int ex_print(sp, cmdp, fp, tp, flags) SCR *sp; EXCMD *cmdp; MARK *fp, *tp; u_int32_t flags; { GS *gp; recno_t from, to; size_t col, len; char *p, buf[10]; NEEDFILE(sp, cmdp); gp = sp->gp; for (from = fp->lno, to = tp->lno; from <= to; ++from) { col = 0; /* * Display the line number. The %6 format is specified * by POSIX 1003.2, and is almost certainly large enough. * Check, though, just in case. */ if (LF_ISSET(E_C_HASH)) { if (from <= 999999) { snprintf(buf, sizeof(buf), "%6ld ", from); p = buf; } else p = "TOOBIG "; if (ex_prchars(sp, p, &col, 8, 0, 0)) return (1); } /* * Display the line. The format for E_C_PRINT isn't very good, * especially in handling end-of-line tabs, but they're almost * backward compatible. */ if (db_get(sp, from, DBG_FATAL, &p, &len)) return (1); if (len == 0 && !LF_ISSET(E_C_LIST)) (void)ex_puts(sp, "\n"); else if (ex_ldisplay(sp, p, len, col, flags)) return (1); if (INTERRUPTED(sp)) break; } return (0); } /* * ex_ldisplay -- * Display a line without any preceding number. * * PUBLIC: int ex_ldisplay __P((SCR *, const char *, size_t, size_t, u_int)); */ int ex_ldisplay(sp, p, len, col, flags) SCR *sp; const char *p; size_t len, col; u_int flags; { if (len > 0 && ex_prchars(sp, p, &col, len, LF_ISSET(E_C_LIST), 0)) return (1); if (!INTERRUPTED(sp) && LF_ISSET(E_C_LIST)) { p = "$"; if (ex_prchars(sp, p, &col, 1, LF_ISSET(E_C_LIST), 0)) return (1); } if (!INTERRUPTED(sp)) (void)ex_puts(sp, "\n"); return (0); } /* * ex_scprint -- * Display a line for the substitute with confirmation routine. * * PUBLIC: int ex_scprint __P((SCR *, MARK *, MARK *)); */ int ex_scprint(sp, fp, tp) SCR *sp; MARK *fp, *tp; { const char *p; size_t col, len; col = 0; if (O_ISSET(sp, O_NUMBER)) { p = " "; if (ex_prchars(sp, p, &col, 8, 0, 0)) return (1); } if (db_get(sp, fp->lno, DBG_FATAL, (char **)&p, &len)) return (1); if (ex_prchars(sp, p, &col, fp->cno, 0, ' ')) return (1); p += fp->cno; if (ex_prchars(sp, p, &col, tp->cno == fp->cno ? 1 : tp->cno - fp->cno, 0, '^')) return (1); if (INTERRUPTED(sp)) return (1); p = "[ynq]"; /* XXX: should be msg_cat. */ if (ex_prchars(sp, p, &col, 5, 0, 0)) return (1); (void)ex_fflush(sp); return (0); } /* * ex_prchars -- * Local routine to dump characters to the screen. */ static int ex_prchars(sp, p, colp, len, flags, repeatc) SCR *sp; const char *p; size_t *colp, len; u_int flags; int repeatc; { CHAR_T ch, *kp; GS *gp; size_t col, tlen, ts; if (O_ISSET(sp, O_LIST)) LF_SET(E_C_LIST); gp = sp->gp; ts = O_VAL(sp, O_TABSTOP); for (col = *colp; len--;) if ((ch = *p++) == '\t' && !LF_ISSET(E_C_LIST)) for (tlen = ts - col % ts; col < sp->cols && tlen--; ++col) { (void)ex_printf(sp, "%c", repeatc ? repeatc : ' '); if (INTERRUPTED(sp)) goto intr; } else { kp = KEY_NAME(sp, ch); tlen = KEY_LEN(sp, ch); if (!repeatc && col + tlen < sp->cols) { (void)ex_puts(sp, kp); col += tlen; } else for (; tlen--; ++kp, ++col) { if (col == sp->cols) { col = 0; (void)ex_puts(sp, "\n"); } (void)ex_printf(sp, "%c", repeatc ? repeatc : *kp); if (INTERRUPTED(sp)) goto intr; } } intr: *colp = col; return (0); } /* * ex_printf -- * Ex's version of printf. * * PUBLIC: int ex_printf __P((SCR *, const char *, ...)); */ int #ifdef __STDC__ ex_printf(SCR *sp, const char *fmt, ...) #else ex_printf(sp, fmt, va_alist) SCR *sp; const char *fmt; va_dcl #endif { EX_PRIVATE *exp; va_list ap; size_t n; exp = EXP(sp); #ifdef __STDC__ va_start(ap, fmt); #else va_start(ap); #endif exp->obp_len += n = vsnprintf(exp->obp + exp->obp_len, sizeof(exp->obp) - exp->obp_len, fmt, ap); va_end(ap); /* Flush when reach a or half the buffer. */ if (exp->obp[exp->obp_len - 1] == '\n' || exp->obp_len > sizeof(exp->obp) / 2) (void)ex_fflush(sp); return (n); } /* * ex_puts -- * Ex's version of puts. * * PUBLIC: int ex_puts __P((SCR *, const char *)); */ int ex_puts(sp, str) SCR *sp; const char *str; { EX_PRIVATE *exp; int doflush, n; exp = EXP(sp); /* Flush when reach a or the end of the buffer. */ for (doflush = n = 0; *str != '\0'; ++n) { if (exp->obp_len > sizeof(exp->obp)) (void)ex_fflush(sp); if ((exp->obp[exp->obp_len++] = *str++) == '\n') doflush = 1; } if (doflush) (void)ex_fflush(sp); return (n); } /* * ex_fflush -- * Ex's version of fflush. * * PUBLIC: int ex_fflush __P((SCR *sp)); */ int ex_fflush(sp) SCR *sp; { EX_PRIVATE *exp; exp = EXP(sp); if (exp->obp_len != 0) { sp->gp->scr_msg(sp, M_NONE, exp->obp, exp->obp_len); exp->obp_len = 0; } return (0); } vigor-0.016.orig/ex/ex_script.c0100644000076400007640000003760207103707265015065 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * This code is derived from software contributed to Berkeley by * Brian Hirt. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_script.c 10.30 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #ifdef HAVE_SYS_SELECT_H #include #endif #include #ifdef HAVE_SYS5_PTY #include #endif #include #include #include #include #include #include /* XXX: OSF/1 bug: include before */ #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #include "script.h" #include "pathnames.h" static void sscr_check __P((SCR *)); static int sscr_getprompt __P((SCR *)); static int sscr_init __P((SCR *)); static int sscr_insert __P((SCR *)); static int sscr_matchprompt __P((SCR *, char *, size_t, size_t *)); static int sscr_pty __P((int *, int *, char *, struct termios *, void *)); static int sscr_setprompt __P((SCR *, char *, size_t)); /* * ex_script -- : sc[ript][!] [file] * Switch to script mode. * * PUBLIC: int ex_script __P((SCR *, EXCMD *)); */ int ex_script(sp, cmdp) SCR *sp; EXCMD *cmdp; { /* Vi only command. */ if (!F_ISSET(sp, SC_VI)) { msgq(sp, M_ERR, "150|The script command is only available in vi mode"); return (1); } /* Switch to the new file. */ if (cmdp->argc != 0 && ex_edit(sp, cmdp)) return (1); /* Create the shell, figure out the prompt. */ if (sscr_init(sp)) return (1); return (0); } /* * sscr_init -- * Create a pty setup for a shell. */ static int sscr_init(sp) SCR *sp; { SCRIPT *sc; char *sh, *sh_path; /* We're going to need a shell. */ if (opts_empty(sp, O_SHELL, 0)) return (1); MALLOC_RET(sp, sc, SCRIPT *, sizeof(SCRIPT)); sp->script = sc; sc->sh_prompt = NULL; sc->sh_prompt_len = 0; /* * There are two different processes running through this code. * They are the shell and the parent. */ sc->sh_master = sc->sh_slave = -1; if (tcgetattr(STDIN_FILENO, &sc->sh_term) == -1) { msgq(sp, M_SYSERR, "tcgetattr"); goto err; } /* * Turn off output postprocessing and echo. */ sc->sh_term.c_oflag &= ~OPOST; sc->sh_term.c_cflag &= ~(ECHO|ECHOE|ECHONL|ECHOK); #ifdef TIOCGWINSZ if (ioctl(STDIN_FILENO, TIOCGWINSZ, &sc->sh_win) == -1) { msgq(sp, M_SYSERR, "tcgetattr"); goto err; } if (sscr_pty(&sc->sh_master, &sc->sh_slave, sc->sh_name, &sc->sh_term, &sc->sh_win) == -1) { msgq(sp, M_SYSERR, "pty"); goto err; } #else if (sscr_pty(&sc->sh_master, &sc->sh_slave, sc->sh_name, &sc->sh_term, NULL) == -1) { msgq(sp, M_SYSERR, "pty"); goto err; } #endif /* * __TK__ huh? * Don't use vfork() here, because the signal semantics differ from * implementation to implementation. */ switch (sc->sh_pid = fork()) { case -1: /* Error. */ msgq(sp, M_SYSERR, "fork"); err: if (sc->sh_master != -1) (void)close(sc->sh_master); if (sc->sh_slave != -1) (void)close(sc->sh_slave); return (1); case 0: /* Utility. */ /* * XXX * So that shells that do command line editing turn it off. */ (void)setenv("TERM", "emacs", 1); (void)setenv("TERMCAP", "emacs:", 1); (void)setenv("EMACS", "t", 1); (void)setsid(); #ifdef TIOCSCTTY /* * 4.4BSD allocates a controlling terminal using the TIOCSCTTY * ioctl, not by opening a terminal device file. POSIX 1003.1 * doesn't define a portable way to do this. If TIOCSCTTY is * not available, hope that the open does it. */ (void)ioctl(sc->sh_slave, TIOCSCTTY, 0); #endif (void)close(sc->sh_master); (void)dup2(sc->sh_slave, STDIN_FILENO); (void)dup2(sc->sh_slave, STDOUT_FILENO); (void)dup2(sc->sh_slave, STDERR_FILENO); (void)close(sc->sh_slave); /* Assumes that all shells have -i. */ sh_path = O_STR(sp, O_SHELL); if ((sh = strrchr(sh_path, '/')) == NULL) sh = sh_path; else ++sh; execl(sh_path, sh, "-i", NULL); msgq_str(sp, M_SYSERR, sh_path, "execl: %s"); _exit(127); default: /* Parent. */ break; } if (sscr_getprompt(sp)) return (1); F_SET(sp, SC_SCRIPT); F_SET(sp->gp, G_SCRWIN); return (0); } /* * sscr_getprompt -- * Eat lines printed by the shell until a line with no trailing * carriage return comes; set the prompt from that line. */ static int sscr_getprompt(sp) SCR *sp; { struct timeval tv; CHAR_T *endp, *p, *t, buf[1024]; SCRIPT *sc; fd_set fdset; recno_t lline; size_t llen, len; u_int value; int nr; FD_ZERO(&fdset); endp = buf; len = sizeof(buf); /* Wait up to a second for characters to read. */ tv.tv_sec = 5; tv.tv_usec = 0; sc = sp->script; FD_SET(sc->sh_master, &fdset); switch (select(sc->sh_master + 1, &fdset, NULL, NULL, &tv)) { case -1: /* Error or interrupt. */ msgq(sp, M_SYSERR, "select"); goto prompterr; case 0: /* Timeout */ msgq(sp, M_ERR, "Error: timed out"); goto prompterr; case 1: /* Characters to read. */ break; } /* Read the characters. */ more: len = sizeof(buf) - (endp - buf); switch (nr = read(sc->sh_master, endp, len)) { case 0: /* EOF. */ msgq(sp, M_ERR, "Error: shell: EOF"); goto prompterr; case -1: /* Error or interrupt. */ msgq(sp, M_SYSERR, "shell"); goto prompterr; default: endp += nr; break; } /* If any complete lines, push them into the file. */ for (p = t = buf; p < endp; ++p) { value = KEY_VAL(sp, *p); if (value == K_CR || value == K_NL) { if (db_last(sp, &lline) || db_append(sp, 0, lline, t, p - t)) goto prompterr; t = p + 1; } } if (p > buf) { memmove(buf, t, endp - t); endp = buf + (endp - t); } if (endp == buf) goto more; /* Wait up 1/10 of a second to make sure that we got it all. */ tv.tv_sec = 0; tv.tv_usec = 100000; switch (select(sc->sh_master + 1, &fdset, NULL, NULL, &tv)) { case -1: /* Error or interrupt. */ msgq(sp, M_SYSERR, "select"); goto prompterr; case 0: /* Timeout */ break; case 1: /* Characters to read. */ goto more; } /* Timed out, so theoretically we have a prompt. */ llen = endp - buf; endp = buf; /* Append the line into the file. */ if (db_last(sp, &lline) || db_append(sp, 0, lline, buf, llen)) { prompterr: sscr_end(sp); return (1); } return (sscr_setprompt(sp, buf, llen)); } /* * sscr_exec -- * Take a line and hand it off to the shell. * * PUBLIC: int sscr_exec __P((SCR *, recno_t)); */ int sscr_exec(sp, lno) SCR *sp; recno_t lno; { SCRIPT *sc; recno_t last_lno; size_t blen, len, last_len, tlen; int isempty, matchprompt, nw, rval; char *bp, *p; /* If there's a prompt on the last line, append the command. */ if (db_last(sp, &last_lno)) return (1); if (db_get(sp, last_lno, DBG_FATAL, &p, &last_len)) return (1); if (sscr_matchprompt(sp, p, last_len, &tlen) && tlen == 0) { matchprompt = 1; GET_SPACE_RET(sp, bp, blen, last_len + 128); memmove(bp, p, last_len); } else matchprompt = 0; /* Get something to execute. */ if (db_eget(sp, lno, &p, &len, &isempty)) { if (isempty) goto empty; goto err1; } /* Empty lines aren't interesting. */ if (len == 0) goto empty; /* Delete any prompt. */ if (sscr_matchprompt(sp, p, len, &tlen)) { if (tlen == len) { empty: msgq(sp, M_BERR, "151|No command to execute"); goto err1; } p += (len - tlen); len = tlen; } /* Push the line to the shell. */ sc = sp->script; if ((nw = write(sc->sh_master, p, len)) != len) goto err2; rval = 0; if (write(sc->sh_master, "\n", 1) != 1) { err2: if (nw == 0) errno = EIO; msgq(sp, M_SYSERR, "shell"); goto err1; } if (matchprompt) { ADD_SPACE_RET(sp, bp, blen, last_len + len); memmove(bp + last_len, p, len); if (db_set(sp, last_lno, bp, last_len + len)) err1: rval = 1; } if (matchprompt) FREE_SPACE(sp, bp, blen); return (rval); } /* * sscr_input -- * Read any waiting shell input. * * PUBLIC: int sscr_input __P((SCR *)); */ int sscr_input(sp) SCR *sp; { GS *gp; struct timeval poll; fd_set rdfd; int maxfd; gp = sp->gp; loop: maxfd = 0; FD_ZERO(&rdfd); poll.tv_sec = 0; poll.tv_usec = 0; /* Set up the input mask. */ for (sp = gp->dq.cqh_first; sp != (void *)&gp->dq; sp = sp->q.cqe_next) if (F_ISSET(sp, SC_SCRIPT)) { FD_SET(sp->script->sh_master, &rdfd); if (sp->script->sh_master > maxfd) maxfd = sp->script->sh_master; } /* Check for input. */ switch (select(maxfd + 1, &rdfd, NULL, NULL, &poll)) { case -1: msgq(sp, M_SYSERR, "select"); return (1); case 0: return (0); default: break; } /* Read the input. */ for (sp = gp->dq.cqh_first; sp != (void *)&gp->dq; sp = sp->q.cqe_next) if (F_ISSET(sp, SC_SCRIPT) && FD_ISSET(sp->script->sh_master, &rdfd) && sscr_insert(sp)) return (1); goto loop; } /* * sscr_insert -- * Take a line from the shell and insert it into the file. */ static int sscr_insert(sp) SCR *sp; { struct timeval tv; CHAR_T *endp, *p, *t; SCRIPT *sc; fd_set rdfd; recno_t lno; size_t blen, len, tlen; u_int value; int nr, rval; char *bp; /* Find out where the end of the file is. */ if (db_last(sp, &lno)) return (1); #define MINREAD 1024 GET_SPACE_RET(sp, bp, blen, MINREAD); endp = bp; /* Read the characters. */ rval = 1; sc = sp->script; more: switch (nr = read(sc->sh_master, endp, MINREAD)) { case 0: /* EOF; shell just exited. */ sscr_end(sp); rval = 0; goto ret; case -1: /* Error or interrupt. */ msgq(sp, M_SYSERR, "shell"); goto ret; default: endp += nr; break; } /* Append the lines into the file. */ for (p = t = bp; p < endp; ++p) { value = KEY_VAL(sp, *p); if (value == K_CR || value == K_NL) { len = p - t; if (db_append(sp, 1, lno++, t, len)) goto ret; t = p + 1; } } if (p > t) { len = p - t; /* * If the last thing from the shell isn't another prompt, wait * up to 1/10 of a second for more stuff to show up, so that * we don't break the output into two separate lines. Don't * want to hang indefinitely because some program is hanging, * confused the shell, or whatever. */ if (!sscr_matchprompt(sp, t, len, &tlen) || tlen != 0) { tv.tv_sec = 0; tv.tv_usec = 100000; FD_ZERO(&rdfd); FD_SET(sc->sh_master, &rdfd); if (select(sc->sh_master + 1, &rdfd, NULL, NULL, &tv) == 1) { memmove(bp, t, len); endp = bp + len; goto more; } } if (sscr_setprompt(sp, t, len)) return (1); if (db_append(sp, 1, lno++, t, len)) goto ret; } /* The cursor moves to EOF. */ sp->lno = lno; sp->cno = len ? len - 1 : 0; rval = vs_refresh(sp, 1); ret: FREE_SPACE(sp, bp, blen); return (rval); } /* * sscr_setprompt -- * * Set the prompt to the last line we got from the shell. * */ static int sscr_setprompt(sp, buf, len) SCR *sp; char *buf; size_t len; { SCRIPT *sc; sc = sp->script; if (sc->sh_prompt) free(sc->sh_prompt); MALLOC(sp, sc->sh_prompt, char *, len + 1); if (sc->sh_prompt == NULL) { sscr_end(sp); return (1); } memmove(sc->sh_prompt, buf, len); sc->sh_prompt_len = len; sc->sh_prompt[len] = '\0'; return (0); } /* * sscr_matchprompt -- * Check to see if a line matches the prompt. Nul's indicate * parts that can change, in both content and size. */ static int sscr_matchprompt(sp, lp, line_len, lenp) SCR *sp; char *lp; size_t line_len, *lenp; { SCRIPT *sc; size_t prompt_len; char *pp; sc = sp->script; if (line_len < (prompt_len = sc->sh_prompt_len)) return (0); for (pp = sc->sh_prompt; prompt_len && line_len; --prompt_len, --line_len) { if (*pp == '\0') { for (; prompt_len && *pp == '\0'; --prompt_len, ++pp); if (!prompt_len) return (0); for (; line_len && *lp != *pp; --line_len, ++lp); if (!line_len) return (0); } if (*pp++ != *lp++) break; } if (prompt_len) return (0); if (lenp != NULL) *lenp = line_len; return (1); } /* * sscr_end -- * End the pipe to a shell. * * PUBLIC: int sscr_end __P((SCR *)); */ int sscr_end(sp) SCR *sp; { SCRIPT *sc; if ((sc = sp->script) == NULL) return (0); /* Turn off the script flags. */ F_CLR(sp, SC_SCRIPT); sscr_check(sp); /* Close down the parent's file descriptors. */ if (sc->sh_master != -1) (void)close(sc->sh_master); if (sc->sh_slave != -1) (void)close(sc->sh_slave); /* This should have killed the child. */ (void)proc_wait(sp, (long)sc->sh_pid, "script-shell", 0, 0); /* Free memory. */ free(sc->sh_prompt); free(sc); sp->script = NULL; return (0); } /* * sscr_check -- * Set/clear the global scripting bit. */ static void sscr_check(sp) SCR *sp; { GS *gp; gp = sp->gp; for (sp = gp->dq.cqh_first; sp != (void *)&gp->dq; sp = sp->q.cqe_next) if (F_ISSET(sp, SC_SCRIPT)) { F_SET(gp, G_SCRWIN); return; } F_CLR(gp, G_SCRWIN); } #ifdef HAVE_SYS5_PTY static int ptys_open __P((int, char *)); static int ptym_open __P((char *)); static int sscr_pty(amaster, aslave, name, termp, winp) int *amaster, *aslave; char *name; struct termios *termp; void *winp; { int master, slave, ttygid; /* open master terminal */ if ((master = ptym_open(name)) < 0) { errno = ENOENT; /* out of ptys */ return (-1); } /* open slave terminal */ if ((slave = ptys_open(master, name)) >= 0) { *amaster = master; *aslave = slave; } else { errno = ENOENT; /* out of ptys */ return (-1); } if (termp) (void) tcsetattr(slave, TCSAFLUSH, termp); #ifdef TIOCSWINSZ if (winp != NULL) (void) ioctl(slave, TIOCSWINSZ, (struct winsize *)winp); #endif return (0); } /* * ptym_open -- * This function opens a master pty and returns the file descriptor * to it. pts_name is also returned which is the name of the slave. */ static int ptym_open(pts_name) char *pts_name; { int fdm; char *ptr, *ptsname(); strcpy(pts_name, _PATH_SYSV_PTY); if ((fdm = open(pts_name, O_RDWR)) < 0 ) return (-1); if (grantpt(fdm) < 0) { close(fdm); return (-2); } if (unlockpt(fdm) < 0) { close(fdm); return (-3); } if (unlockpt(fdm) < 0) { close(fdm); return (-3); } /* get slave's name */ if ((ptr = ptsname(fdm)) == NULL) { close(fdm); return (-3); } strcpy(pts_name, ptr); return (fdm); } /* * ptys_open -- * This function opens the slave pty. */ static int ptys_open(fdm, pts_name) int fdm; char *pts_name; { int fds; if ((fds = open(pts_name, O_RDWR)) < 0) { close(fdm); return (-5); } if (ioctl(fds, I_PUSH, "ptem") < 0) { close(fds); close(fdm); return (-6); } if (ioctl(fds, I_PUSH, "ldterm") < 0) { close(fds); close(fdm); return (-7); } if (ioctl(fds, I_PUSH, "ttcompat") < 0) { close(fds); close(fdm); return (-8); } return (fds); } #else /* !HAVE_SYS5_PTY */ static int sscr_pty(amaster, aslave, name, termp, winp) int *amaster, *aslave; char *name; struct termios *termp; void *winp; { static char line[] = "/dev/ptyXX"; register char *cp1, *cp2; register int master, slave, ttygid; struct group *gr; if ((gr = getgrnam("tty")) != NULL) ttygid = gr->gr_gid; else ttygid = -1; for (cp1 = "pqrs"; *cp1; cp1++) { line[8] = *cp1; for (cp2 = "0123456789abcdef"; *cp2; cp2++) { line[5] = 'p'; line[9] = *cp2; if ((master = open(line, O_RDWR, 0)) == -1) { if (errno == ENOENT) return (-1); /* out of ptys */ } else { line[5] = 't'; (void) chown(line, getuid(), ttygid); (void) chmod(line, S_IRUSR|S_IWUSR|S_IWGRP); #ifdef HAVE_REVOKE (void) revoke(line); #endif if ((slave = open(line, O_RDWR, 0)) != -1) { *amaster = master; *aslave = slave; if (name) strcpy(name, line); if (termp) (void) tcsetattr(slave, TCSAFLUSH, termp); #ifdef TIOCSWINSZ if (winp) (void) ioctl(slave, TIOCSWINSZ, (char *)winp); #endif return (0); } (void) close(master); } } } errno = ENOENT; /* out of ptys */ return (-1); } #endif /* HAVE_SYS5_PTY */ vigor-0.016.orig/ex/ex_put.c0100644000076400007640000000172407103707265014365 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_put.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_put -- [line] pu[t] [buffer] * Append a cut buffer into the file. * * PUBLIC: int ex_put __P((SCR *, EXCMD *)); */ int ex_put(sp, cmdp) SCR *sp; EXCMD *cmdp; { MARK m; NEEDFILE(sp, cmdp); m.lno = sp->lno; m.cno = sp->cno; if (put(sp, NULL, FL_ISSET(cmdp->iflags, E_C_BUFFER) ? &cmdp->buffer : NULL, &cmdp->addr1, &m, 1)) return (1); sp->lno = m.lno; sp->cno = m.cno; return (0); } vigor-0.016.orig/ex/ex_shell.c0100644000076400007640000001716007103707265014665 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_shell.c 10.38 (Berkeley) 8/19/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" static const char *sigmsg __P((int)); /* * ex_shell -- :sh[ell] * Invoke the program named in the SHELL environment variable * with the argument -i. * * PUBLIC: int ex_shell __P((SCR *, EXCMD *)); */ int ex_shell(sp, cmdp) SCR *sp; EXCMD *cmdp; { int rval; char buf[MAXPATHLEN]; /* We'll need a shell. */ if (opts_empty(sp, O_SHELL, 0)) return (1); /* * XXX * Assumes all shells use -i. */ (void)snprintf(buf, sizeof(buf), "%s -i", O_STR(sp, O_SHELL)); /* Restore the window name. */ (void)sp->gp->scr_rename(sp, NULL, 0); /* If we're still in a vi screen, move out explicitly. */ rval = ex_exec_proc(sp, cmdp, buf, NULL, !F_ISSET(sp, SC_SCR_EXWROTE)); /* Set the window name. */ (void)sp->gp->scr_rename(sp, sp->frp->name, 1); /* * !!! * Historically, vi didn't require a continue message after the * return of the shell. Match it. */ F_SET(sp, SC_EX_WAIT_NO); return (rval); } /* * ex_exec_proc -- * Run a separate process. * * PUBLIC: int ex_exec_proc __P((SCR *, EXCMD *, char *, const char *, int)); */ int ex_exec_proc(sp, cmdp, cmd, msg, need_newline) SCR *sp; EXCMD *cmdp; char *cmd; const char *msg; int need_newline; { GS *gp; const char *name; pid_t pid; gp = sp->gp; /* We'll need a shell. */ if (opts_empty(sp, O_SHELL, 0)) return (1); /* Enter ex mode. */ if (F_ISSET(sp, SC_VI)) { if (gp->scr_screen(sp, SC_EX)) { ex_emsg(sp, cmdp->cmd->name, EXM_NOCANON); return (1); } (void)gp->scr_attr(sp, SA_ALTERNATE, 0); F_SET(sp, SC_SCR_EX | SC_SCR_EXWROTE); } /* Put out additional newline, message. */ if (need_newline) (void)ex_puts(sp, "\n"); if (msg != NULL) { (void)ex_puts(sp, msg); (void)ex_puts(sp, "\n"); } (void)ex_fflush(sp); switch (pid = vfork()) { case -1: /* Error. */ msgq(sp, M_SYSERR, "vfork"); return (1); case 0: /* Utility. */ if ((name = strrchr(O_STR(sp, O_SHELL), '/')) == NULL) name = O_STR(sp, O_SHELL); else ++name; execl(O_STR(sp, O_SHELL), name, "-c", cmd, NULL); msgq_str(sp, M_SYSERR, O_STR(sp, O_SHELL), "execl: %s"); _exit(127); /* NOTREACHED */ default: /* Parent. */ return (proc_wait(sp, (long)pid, cmd, 0, 0)); } /* NOTREACHED */ } /* * proc_wait -- * Wait for one of the processes. * * !!! * The pid_t type varies in size from a short to a long depending on the * system. It has to be cast into something or the standard promotion * rules get you. I'm using a long based on the belief that nobody is * going to make it unsigned and it's unlikely to be a quad. * * PUBLIC: int proc_wait __P((SCR *, long, const char *, int, int)); */ int proc_wait(sp, pid, cmd, silent, okpipe) SCR *sp; long pid; const char *cmd; int silent, okpipe; { size_t len; int nf, pstat; char *p; /* Wait for the utility, ignoring interruptions. */ for (;;) { errno = 0; if (waitpid((pid_t)pid, &pstat, 0) != -1) break; if (errno != EINTR) { msgq(sp, M_SYSERR, "waitpid"); return (1); } } /* * Display the utility's exit status. Ignore SIGPIPE from the * parent-writer, as that only means that the utility chose to * exit before reading all of its input. */ if (WIFSIGNALED(pstat) && (!okpipe || WTERMSIG(pstat) != SIGPIPE)) { for (; isblank(*cmd); ++cmd); p = msg_print(sp, cmd, &nf); len = strlen(p); msgq(sp, M_ERR, "%.*s%s: received signal: %s%s", MIN(len, 20), p, len > 20 ? " ..." : "", sigmsg(WTERMSIG(pstat)), WCOREDUMP(pstat) ? "; core dumped" : ""); if (nf) FREE_SPACE(sp, p, 0); return (1); } if (WIFEXITED(pstat) && WEXITSTATUS(pstat)) { /* * Remain silent for "normal" errors when doing shell file * name expansions, they almost certainly indicate nothing * more than a failure to match. * * Remain silent for vi read filter errors. It's historic * practice. */ if (!silent) { for (; isblank(*cmd); ++cmd); p = msg_print(sp, cmd, &nf); len = strlen(p); msgq(sp, M_ERR, "%.*s%s: exited with status %d", MIN(len, 20), p, len > 20 ? " ..." : "", WEXITSTATUS(pstat)); if (nf) FREE_SPACE(sp, p, 0); } return (1); } return (0); } /* * XXX * The sys_siglist[] table in the C library has this information, but there's * no portable way to get to it. (Believe me, I tried.) */ typedef struct _sigs { int number; /* signal number */ char *message; /* related message */ } SIGS; SIGS const sigs[] = { #ifdef SIGABRT SIGABRT, "Abort trap", #endif #ifdef SIGALRM SIGALRM, "Alarm clock", #endif #ifdef SIGBUS SIGBUS, "Bus error", #endif #ifdef SIGCLD SIGCLD, "Child exited or stopped", #endif #ifdef SIGCHLD SIGCHLD, "Child exited", #endif #ifdef SIGCONT SIGCONT, "Continued", #endif #ifdef SIGDANGER SIGDANGER, "System crash imminent", #endif #ifdef SIGEMT SIGEMT, "EMT trap", #endif #ifdef SIGFPE SIGFPE, "Floating point exception", #endif #ifdef SIGGRANT SIGGRANT, "HFT monitor mode granted", #endif #ifdef SIGHUP SIGHUP, "Hangup", #endif #ifdef SIGILL SIGILL, "Illegal instruction", #endif #ifdef SIGINFO SIGINFO, "Information request", #endif #ifdef SIGINT SIGINT, "Interrupt", #endif #ifdef SIGIO SIGIO, "I/O possible", #endif #ifdef SIGIOT SIGIOT, "IOT trap", #endif #ifdef SIGKILL SIGKILL, "Killed", #endif #ifdef SIGLOST SIGLOST, "Record lock", #endif #ifdef SIGMIGRATE SIGMIGRATE, "Migrate process to another CPU", #endif #ifdef SIGMSG SIGMSG, "HFT input data pending", #endif #ifdef SIGPIPE SIGPIPE, "Broken pipe", #endif #ifdef SIGPOLL SIGPOLL, "I/O possible", #endif #ifdef SIGPRE SIGPRE, "Programming error", #endif #ifdef SIGPROF SIGPROF, "Profiling timer expired", #endif #ifdef SIGPWR SIGPWR, "Power failure imminent", #endif #ifdef SIGRETRACT SIGRETRACT, "HFT monitor mode retracted", #endif #ifdef SIGQUIT SIGQUIT, "Quit", #endif #ifdef SIGSAK SIGSAK, "Secure Attention Key", #endif #ifdef SIGSEGV SIGSEGV, "Segmentation fault", #endif #ifdef SIGSOUND SIGSOUND, "HFT sound sequence completed", #endif #ifdef SIGSTOP SIGSTOP, "Suspended (signal)", #endif #ifdef SIGSYS SIGSYS, "Bad system call", #endif #ifdef SIGTERM SIGTERM, "Terminated", #endif #ifdef SIGTRAP SIGTRAP, "Trace/BPT trap", #endif #ifdef SIGTSTP SIGTSTP, "Suspended", #endif #ifdef SIGTTIN SIGTTIN, "Stopped (tty input)", #endif #ifdef SIGTTOU SIGTTOU, "Stopped (tty output)", #endif #ifdef SIGURG SIGURG, "Urgent I/O condition", #endif #ifdef SIGUSR1 SIGUSR1, "User defined signal 1", #endif #ifdef SIGUSR2 SIGUSR2, "User defined signal 2", #endif #ifdef SIGVTALRM SIGVTALRM, "Virtual timer expired", #endif #ifdef SIGWINCH SIGWINCH, "Window size changes", #endif #ifdef SIGXCPU SIGXCPU, "Cputime limit exceeded", #endif #ifdef SIGXFSZ SIGXFSZ, "Filesize limit exceeded", #endif }; /* * sigmsg -- * Return a pointer to a message describing a signal. */ static const char * sigmsg(signo) int signo; { static char buf[40]; const SIGS *sigp; int n; for (n = 0, sigp = &sigs[0]; n < sizeof(sigs) / sizeof(sigs[0]); ++n, ++sigp) if (sigp->number == signo) return (sigp->message); (void)snprintf(buf, sizeof(buf), "Unknown signal: %d", signo); return (buf); } vigor-0.016.orig/ex/ex_screen.c0100644000076400007640000000463307103707265015036 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_screen.c 10.11 (Berkeley) 6/29/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" /* * ex_bg -- :bg * Hide the screen. * * PUBLIC: int ex_bg __P((SCR *, EXCMD *)); */ int ex_bg(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (vs_bg(sp)); } /* * ex_fg -- :fg [file] * Show the screen. * * PUBLIC: int ex_fg __P((SCR *, EXCMD *)); */ int ex_fg(sp, cmdp) SCR *sp; EXCMD *cmdp; { SCR *nsp; int newscreen; newscreen = F_ISSET(cmdp, E_NEWSCREEN); if (vs_fg(sp, &nsp, cmdp->argc ? cmdp->argv[0]->bp : NULL, newscreen)) return (1); /* Set up the switch. */ if (newscreen) { sp->nextdisp = nsp; F_SET(sp, SC_SSWITCH); } return (0); } /* * ex_resize -- :resize [+-]rows * Change the screen size. * * PUBLIC: int ex_resize __P((SCR *, EXCMD *)); */ int ex_resize(sp, cmdp) SCR *sp; EXCMD *cmdp; { adj_t adj; switch (FL_ISSET(cmdp->iflags, E_C_COUNT | E_C_COUNT_NEG | E_C_COUNT_POS)) { case E_C_COUNT: adj = A_SET; break; case E_C_COUNT | E_C_COUNT_NEG: adj = A_DECREASE; break; case E_C_COUNT | E_C_COUNT_POS: adj = A_INCREASE; break; default: ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } return (vs_resize(sp, cmdp->count, adj)); } /* * ex_sdisplay -- * Display the list of screens. * * PUBLIC: int ex_sdisplay __P((SCR *)); */ int ex_sdisplay(sp) SCR *sp; { GS *gp; SCR *tsp; int cnt, col, len, sep; gp = sp->gp; if ((tsp = gp->hq.cqh_first) == (void *)&gp->hq) { msgq(sp, M_INFO, "149|No background screens to display"); return (0); } col = len = sep = 0; for (cnt = 1; tsp != (void *)&gp->hq && !INTERRUPTED(sp); tsp = tsp->q.cqe_next) { col += len = strlen(tsp->frp->name) + sep; if (col >= sp->cols - 1) { col = len; sep = 0; (void)ex_puts(sp, "\n"); } else if (cnt != 1) { sep = 1; (void)ex_puts(sp, " "); } (void)ex_puts(sp, tsp->frp->name); ++cnt; } if (!INTERRUPTED(sp)) (void)ex_puts(sp, "\n"); return (0); } vigor-0.016.orig/ex/ex_set.c0100644000076400007640000000150507103707265014345 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_set.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" /* * ex_set -- :set * Ex set option. * * PUBLIC: int ex_set __P((SCR *, EXCMD *)); */ int ex_set(sp, cmdp) SCR *sp; EXCMD *cmdp; { switch(cmdp->argc) { case 0: opts_dump(sp, CHANGED_DISPLAY); break; default: if (opts_set(sp, cmdp->argv, cmdp->cmd->usage)) return (1); break; } return (0); } vigor-0.016.orig/ex/ex_shift.c0100644000076400007640000001072707103707265014675 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_shift.c 10.11 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include "../common/common.h" enum which {LEFT, RIGHT}; static int shift __P((SCR *, EXCMD *, enum which)); /* * ex_shiftl -- :<[<...] * * * PUBLIC: int ex_shiftl __P((SCR *, EXCMD *)); */ int ex_shiftl(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (shift(sp, cmdp, LEFT)); } /* * ex_shiftr -- :>[>...] * * PUBLIC: int ex_shiftr __P((SCR *, EXCMD *)); */ int ex_shiftr(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (shift(sp, cmdp, RIGHT)); } /* * shift -- * Ex shift support. */ static int shift(sp, cmdp, rl) SCR *sp; EXCMD *cmdp; enum which rl; { recno_t from, to; size_t blen, len, newcol, newidx, oldcol, oldidx, sw; int curset; char *p, *bp, *tbp; NEEDFILE(sp, cmdp); if (O_VAL(sp, O_SHIFTWIDTH) == 0) { msgq(sp, M_INFO, "152|shiftwidth option set to 0"); return (0); } /* Copy the lines being shifted into the unnamed buffer. */ if (cut(sp, NULL, &cmdp->addr1, &cmdp->addr2, CUT_LINEMODE)) return (1); /* * The historic version of vi permitted the user to string any number * of '>' or '<' characters together, resulting in an indent of the * appropriate levels. There's a special hack in ex_cmd() so that * cmdp->argv[0] points to the string of '>' or '<' characters. * * Q: What's the difference between the people adding features * to vi and the Girl Scouts? * A: The Girl Scouts have mint cookies and adult supervision. */ for (p = cmdp->argv[0]->bp, sw = 0; *p == '>' || *p == '<'; ++p) sw += O_VAL(sp, O_SHIFTWIDTH); GET_SPACE_RET(sp, bp, blen, 256); curset = 0; for (from = cmdp->addr1.lno, to = cmdp->addr2.lno; from <= to; ++from) { if (db_get(sp, from, DBG_FATAL, &p, &len)) goto err; if (!len) { if (sp->lno == from) curset = 1; continue; } /* * Calculate the old indent amount and the number of * characters it used. */ for (oldidx = 0, oldcol = 0; oldidx < len; ++oldidx) if (p[oldidx] == ' ') ++oldcol; else if (p[oldidx] == '\t') oldcol += O_VAL(sp, O_TABSTOP) - oldcol % O_VAL(sp, O_TABSTOP); else break; /* Calculate the new indent amount. */ if (rl == RIGHT) newcol = oldcol + sw; else { newcol = oldcol < sw ? 0 : oldcol - sw; if (newcol == oldcol) { if (sp->lno == from) curset = 1; continue; } } /* Get a buffer that will hold the new line. */ ADD_SPACE_RET(sp, bp, blen, newcol + len); /* * Build a new indent string and count the number of * characters it uses. */ for (tbp = bp, newidx = 0; newcol >= O_VAL(sp, O_TABSTOP); ++newidx) { *tbp++ = '\t'; newcol -= O_VAL(sp, O_TABSTOP); } for (; newcol > 0; --newcol, ++newidx) *tbp++ = ' '; /* Add the original line. */ memcpy(tbp, p + oldidx, len - oldidx); /* Set the replacement line. */ if (db_set(sp, from, bp, (tbp + (len - oldidx)) - bp)) { err: FREE_SPACE(sp, bp, blen); return (1); } /* * !!! * The shift command in historic vi had the usual bizarre * collection of cursor semantics. If called from vi, the * cursor was repositioned to the first non-blank character * of the lowest numbered line shifted. If called from ex, * the cursor was repositioned to the first non-blank of the * highest numbered line shifted. Here, if the cursor isn't * part of the set of lines that are moved, move it to the * first non-blank of the last line shifted. (This makes * ":3>>" in vi work reasonably.) If the cursor is part of * the shifted lines, it doesn't get moved at all. This * permits shifting of marked areas, i.e. ">'a." shifts the * marked area twice, something that couldn't be done with * historic vi. */ if (sp->lno == from) { curset = 1; if (newidx > oldidx) sp->cno += newidx - oldidx; else if (sp->cno >= oldidx - newidx) sp->cno -= oldidx - newidx; } } if (!curset) { sp->lno = to; sp->cno = 0; (void)nonblank(sp, to, &sp->cno); } FREE_SPACE(sp, bp, blen); sp->rptlines[L_SHIFT] += cmdp->addr2.lno - cmdp->addr1.lno + 1; return (0); } vigor-0.016.orig/ex/ex_source.c0100644000076400007640000000362507103707265015057 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_source.c 10.12 (Berkeley) 8/10/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_source -- :source file * Execute ex commands from a file. * * PUBLIC: int ex_source __P((SCR *, EXCMD *)); */ int ex_source(sp, cmdp) SCR *sp; EXCMD *cmdp; { struct stat sb; int fd, len; char *bp, *name; name = cmdp->argv[0]->bp; if ((fd = open(name, O_RDONLY, 0)) < 0 || fstat(fd, &sb)) goto err; /* * XXX * I'd like to test to see if the file is too large to malloc. Since * we don't know what size or type off_t's or size_t's are, what the * largest unsigned integral type is, or what random insanity the local * C compiler will perpetrate, doing the comparison in a portable way * is flatly impossible. So, put an fairly unreasonable limit on it, * I don't want to be dropping core here. */ #define MEGABYTE 1048576 if (sb.st_size > MEGABYTE) { errno = ENOMEM; goto err; } MALLOC(sp, bp, char *, (size_t)sb.st_size + 1); if (bp == NULL) { (void)close(fd); return (1); } bp[sb.st_size] = '\0'; /* Read the file into memory. */ len = read(fd, bp, (int)sb.st_size); (void)close(fd); if (len == -1 || len != sb.st_size) { if (len != sb.st_size) errno = EIO; free(bp); err: msgq_str(sp, M_SYSERR, name, "%s"); return (1); } /* Put it on the ex queue. */ return (ex_run_str(sp, name, bp, (size_t)sb.st_size, 1, 1)); } vigor-0.016.orig/ex/ex_stop.c0100644000076400007640000000200607103707265014534 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_stop.c 10.10 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_stop -- :stop[!] * :suspend[!] * Suspend execution. * * PUBLIC: int ex_stop __P((SCR *, EXCMD *)); */ int ex_stop(sp, cmdp) SCR *sp; EXCMD *cmdp; { int allowed; /* For some strange reason, the force flag turns off autowrite. */ if (!FL_ISSET(cmdp->iflags, E_C_FORCE) && file_aw(sp, FS_ALL)) return (1); if (sp->gp->scr_suspend(sp, &allowed)) return (1); if (!allowed) ex_emsg(sp, NULL, EXM_NOSUSPEND); return (0); } vigor-0.016.orig/ex/ex_tcl.c0100644000076400007640000000343107103707265014334 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * Copyright (c) 1995 * George V. Neville-Neil. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_tcl.c 8.10 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" #ifdef HAVE_TCL_INTERP #include #endif /* * ex_tcl -- :[line [,line]] tcl [command] * Run a command through the tcl interpreter. * * PUBLIC: int ex_tcl __P((SCR*, EXCMD *)); */ int ex_tcl(sp, cmdp) SCR *sp; EXCMD *cmdp; { #ifdef HAVE_TCL_INTERP CHAR_T *p; GS *gp; size_t len; char buf[128]; /* Initialize the interpreter. */ gp = sp->gp; if (gp->tcl_interp == NULL && tcl_init(gp)) return (1); /* Skip leading white space. */ if (cmdp->argc != 0) for (p = cmdp->argv[0]->bp, len = cmdp->argv[0]->len; len > 0; --len, ++p) if (!isblank(*p)) break; if (cmdp->argc == 0 || len == 0) { ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } (void)snprintf(buf, sizeof(buf), "set viScreenId %d\nset viStartLine %lu\nset viStopLine %lu", sp->id, cmdp->addr1.lno, cmdp->addr2.lno); if (Tcl_Eval(gp->tcl_interp, buf) == TCL_OK && Tcl_Eval(gp->tcl_interp, cmdp->argv[0]->bp) == TCL_OK) return (0); msgq(sp, M_ERR, "Tcl: %s", ((Tcl_Interp *)gp->tcl_interp)->result); return (1); #else msgq(sp, M_ERR, "302|Vi was not loaded with a Tcl interpreter"); return (1); #endif /* HAVE_TCL_INTERP */ } vigor-0.016.orig/ex/ex_txt.c0100644000076400007640000002573607103707265014405 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_txt.c 10.17 (Berkeley) 10/10/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include "../common/common.h" /* * !!! * The backslash characters was special when it preceded a newline as part of * a substitution replacement pattern. For example, the input ":a\" would * failed immediately with an error, as the wasn't part of a substitution * replacement pattern. This implies a frightening integration of the editor * and the parser and/or the RE engine. There's no way I'm going to reproduce * those semantics. * * So, if backslashes are special, this code inserts the backslash and the next * character into the string, without regard for the character or the command * being entered. Since "\" was illegal historically (except for the one * special case), and the command will fail eventually, no historical scripts * should break (presuming they didn't depend on the failure mode itself or the * characters remaining when failure occurred. */ static int txt_dent __P((SCR *, TEXT *)); static void txt_prompt __P((SCR *, TEXT *, ARG_CHAR_T, u_int32_t)); /* * ex_txt -- * Get lines from the terminal for ex. * * PUBLIC: int ex_txt __P((SCR *, TEXTH *, ARG_CHAR_T, u_int32_t)); */ int ex_txt(sp, tiqh, prompt, flags) SCR *sp; TEXTH *tiqh; ARG_CHAR_T prompt; u_int32_t flags; { EVENT ev; GS *gp; TEXT ait, *ntp, *tp; carat_t carat_st; size_t cnt; int rval; rval = 0; /* * Get a TEXT structure with some initial buffer space, reusing the * last one if it's big enough. (All TEXT bookkeeping fields default * to 0 -- text_init() handles this.) */ if (tiqh->cqh_first != (void *)tiqh) { tp = tiqh->cqh_first; if (tp->q.cqe_next != (void *)tiqh || tp->lb_len < 32) { text_lfree(tiqh); goto newtp; } tp->len = 0; } else { newtp: if ((tp = text_init(sp, NULL, 0, 32)) == NULL) goto err; CIRCLEQ_INSERT_HEAD(tiqh, tp, q); } /* Set the starting line number. */ tp->lno = sp->lno + 1; /* * If it's a terminal, set up autoindent, put out the prompt, and * set it up so we know we were suspended. Otherwise, turn off * the autoindent flag, as that requires less special casing below. * * XXX * Historic practice is that ^Z suspended command mode (but, because * it ran in cooked mode, it was unaffected by the autowrite option.) * On restart, any "current" input was discarded, whether in insert * mode or not, and ex was in command mode. This code matches historic * practice, but not 'cause it's easier. */ gp = sp->gp; if (F_ISSET(gp, G_SCRIPTED)) LF_CLR(TXT_AUTOINDENT); else { if (LF_ISSET(TXT_AUTOINDENT)) { LF_SET(TXT_EOFCHAR); if (v_txt_auto(sp, sp->lno, NULL, 0, tp)) goto err; } txt_prompt(sp, tp, prompt, flags); } for (carat_st = C_NOTSET;;) { if (v_event_get(sp, &ev, 0, 0)) goto err; /* Deal with all non-character events. */ switch (ev.e_event) { case E_CHARACTER: break; case E_ERR: goto err; case E_REPAINT: case E_WRESIZE: continue; case E_EOF: rval = 1; /* FALLTHROUGH */ case E_INTERRUPT: /* * Handle EOF/SIGINT events by discarding partially * entered text and returning. EOF returns failure, * E_INTERRUPT returns success. */ goto notlast; default: v_event_err(sp, &ev); goto notlast; } /* * Deal with character events. * * Check to see if the character fits into the input buffer. * (Use tp->len, ignore overwrite and non-printable chars.) */ BINC_GOTO(sp, tp->lb, tp->lb_len, tp->len + 1); switch (ev.e_value) { case K_CR: /* * !!! * Historically, 's in the command * weren't special, so the ex parser would return an * unknown command error message. However, if they * terminated the command if they were in a map. I'm * pretty sure this still isn't right, but it handles * what I've seen so far. */ if (!F_ISSET(&ev.e_ch, CH_MAPPED)) goto ins_ch; /* FALLTHROUGH */ case K_NL: /* * '\' can escape /. We * don't discard the backslash because we need it * to get the through the ex parser. */ if (LF_ISSET(TXT_BACKSLASH) && tp->len != 0 && tp->lb[tp->len - 1] == '\\') goto ins_ch; /* * CR returns from the ex command line. * * XXX * Terminate with a nul, needed by filter. */ if (LF_ISSET(TXT_CR)) { tp->lb[tp->len] = '\0'; goto done; } /* * '.' may terminate text input mode; free the current * TEXT. */ if (LF_ISSET(TXT_DOTTERM) && tp->len == tp->ai + 1 && tp->lb[tp->len - 1] == '.') { notlast: CIRCLEQ_REMOVE(tiqh, tp, q); text_free(tp); goto done; } /* Set up bookkeeping for the new line. */ if ((ntp = text_init(sp, NULL, 0, 32)) == NULL) goto err; ntp->lno = tp->lno + 1; /* * Reset the autoindent line value. 0^D keeps the ai * line from changing, ^D changes the level, even if * there were no characters in the old line. Note, if * using the current tp structure, use the cursor as * the length, the autoindent characters may have been * erased. */ if (LF_ISSET(TXT_AUTOINDENT)) { if (carat_st == C_NOCHANGE) { if (v_txt_auto(sp, OOBLNO, &ait, ait.ai, ntp)) goto err; free(ait.lb); } else if (v_txt_auto(sp, OOBLNO, tp, tp->len, ntp)) goto err; carat_st = C_NOTSET; } txt_prompt(sp, ntp, prompt, flags); /* * Swap old and new TEXT's, and insert the new TEXT * into the queue. */ tp = ntp; CIRCLEQ_INSERT_TAIL(tiqh, tp, q); break; case K_CARAT: /* Delete autoindent chars. */ if (tp->len <= tp->ai && LF_ISSET(TXT_AUTOINDENT)) carat_st = C_CARATSET; goto ins_ch; case K_ZERO: /* Delete autoindent chars. */ if (tp->len <= tp->ai && LF_ISSET(TXT_AUTOINDENT)) carat_st = C_ZEROSET; goto ins_ch; case K_CNTRLD: /* Delete autoindent char. */ /* * !!! * Historically, the ^D command took (but then ignored) * a count. For simplicity, we don't return it unless * it's the first character entered. The check for len * equal to 0 is okay, TXT_AUTOINDENT won't be set. */ if (LF_ISSET(TXT_CNTRLD)) { for (cnt = 0; cnt < tp->len; ++cnt) if (!isblank(tp->lb[cnt])) break; if (cnt == tp->len) { tp->len = 1; tp->lb[0] = ev.e_c; tp->lb[1] = '\0'; /* * Put out a line separator, in case * the command fails. */ (void)putchar('\n'); goto done; } } /* * POSIX 1003.1b-1993, paragraph 7.1.1.9, states that * the EOF characters are discarded if there are other * characters to process in the line, i.e. if the EOF * is not the first character in the line. For this * reason, historic ex discarded the EOF characters, * even if occurring in the middle of the input line. * We match that historic practice. * * !!! * The test for discarding in the middle of the line is * done in the switch, because the CARAT forms are N+1, * not N. * * !!! * There's considerable magic to make the terminal code * return the EOF character at all. See that code for * details. */ if (!LF_ISSET(TXT_AUTOINDENT) || tp->len == 0) continue; switch (carat_st) { case C_CARATSET: /* ^^D */ if (tp->len > tp->ai + 1) continue; /* Save the ai string for later. */ ait.lb = NULL; ait.lb_len = 0; BINC_GOTO(sp, ait.lb, ait.lb_len, tp->ai); memcpy(ait.lb, tp->lb, tp->ai); ait.ai = ait.len = tp->ai; carat_st = C_NOCHANGE; goto leftmargin; case C_ZEROSET: /* 0^D */ if (tp->len > tp->ai + 1) continue; carat_st = C_NOTSET; leftmargin: (void)gp->scr_ex_adjust(sp, EX_TERM_CE); tp->ai = tp->len = 0; break; case C_NOTSET: /* ^D */ if (tp->len > tp->ai) continue; if (txt_dent(sp, tp)) goto err; break; default: abort(); } /* Clear and redisplay the line. */ (void)gp->scr_ex_adjust(sp, EX_TERM_CE); txt_prompt(sp, tp, prompt, flags); break; default: /* * See the TXT_BEAUTIFY comment in vi/v_txt_ev.c. * * Silently eliminate any iscntrl() character that was * not already handled specially, except for and * . */ ins_ch: if (LF_ISSET(TXT_BEAUTIFY) && iscntrl(ev.e_c) && ev.e_value != K_FORMFEED && ev.e_value != K_TAB) break; tp->lb[tp->len++] = ev.e_c; break; } } /* NOTREACHED */ done: return (rval); err: alloc_err: return (1); } /* * txt_prompt -- * Display the ex prompt, line number, ai characters. Characters had * better be printable by the terminal driver, but that's its problem, * not ours. */ static void txt_prompt(sp, tp, prompt, flags) SCR *sp; TEXT *tp; ARG_CHAR_T prompt; u_int32_t flags; { /* Display the prompt. */ if (LF_ISSET(TXT_PROMPT)) (void)printf("%c", prompt); /* Display the line number. */ if (LF_ISSET(TXT_NUMBER) && O_ISSET(sp, O_NUMBER)) (void)printf("%6lu ", (u_long)tp->lno); /* Print out autoindent string. */ if (LF_ISSET(TXT_AUTOINDENT)) (void)printf("%.*s", (int)tp->ai, tp->lb); (void)fflush(stdout); } /* * txt_dent -- * Handle ^D outdents. * * Ex version of vi/v_ntext.c:txt_dent(). See that code for the (usual) * ranting and raving. This is a fair bit simpler as ^T isn't special. */ static int txt_dent(sp, tp) SCR *sp; TEXT *tp; { u_long sw, ts; size_t cno, off, scno, spaces, tabs; ts = O_VAL(sp, O_TABSTOP); sw = O_VAL(sp, O_SHIFTWIDTH); /* Get the current screen column. */ for (off = scno = 0; off < tp->len; ++off) if (tp->lb[off] == '\t') scno += COL_OFF(scno, ts); else ++scno; /* Get the previous shiftwidth column. */ cno = scno; scno -= --scno % sw; /* * Since we don't know what comes before the character(s) being * deleted, we have to resolve the autoindent characters . The * example is a , which doesn't take up a full shiftwidth * number of columns because it's preceded by s. This is * easy to get if the user sets shiftwidth to a value less than * tabstop, and then uses ^T to indent, and ^D to outdent. * * Count up spaces/tabs needed to get to the target. */ for (cno = 0, tabs = 0; cno + COL_OFF(cno, ts) <= scno; ++tabs) cno += COL_OFF(cno, ts); spaces = scno - cno; /* Make sure there's enough room. */ BINC_RET(sp, tp->lb, tp->lb_len, tabs + spaces + 1); /* Adjust the final ai character count. */ tp->ai = tabs + spaces; /* Enter the replacement characters. */ for (tp->len = 0; tabs > 0; --tabs) tp->lb[tp->len++] = '\t'; for (; spaces > 0; --spaces) tp->lb[tp->len++] = ' '; return (0); } vigor-0.016.orig/ex/ex_undo.c0100644000076400007640000000266307103707265014525 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_undo.c 10.6 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" /* * ex_undo -- u * Undo the last change. * * PUBLIC: int ex_undo __P((SCR *, EXCMD *)); */ int ex_undo(sp, cmdp) SCR *sp; EXCMD *cmdp; { EXF *ep; MARK m; /* * !!! * Historic undo always set the previous context mark. */ m.lno = sp->lno; m.cno = sp->cno; if (mark_set(sp, ABSMARK1, &m, 1)) return (1); /* * !!! * Multiple undo isn't available in ex, as there's no '.' command. * Whether 'u' is undo or redo is toggled each time, unless there * was a change since the last undo, in which case it's an undo. */ ep = sp->ep; if (!F_ISSET(ep, F_UNDO)) { F_SET(ep, F_UNDO); ep->lundo = FORWARD; } switch (ep->lundo) { case BACKWARD: if (log_forward(sp, &m)) return (1); ep->lundo = FORWARD; break; case FORWARD: if (log_backward(sp, &m)) return (1); ep->lundo = BACKWARD; break; case NOTSET: abort(); } sp->lno = m.lno; sp->cno = m.cno; return (0); } vigor-0.016.orig/ex/ex_usage.c0100644000076400007640000001043707103707265014662 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_usage.c 10.13 (Berkeley) 5/3/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" /* * ex_help -- :help * Display help message. * * PUBLIC: int ex_help __P((SCR *, EXCMD *)); */ int ex_help(sp, cmdp) SCR *sp; EXCMD *cmdp; { (void)ex_puts(sp, "To see the list of vi commands, enter \":viusage\"\n"); (void)ex_puts(sp, "To see the list of ex commands, enter \":exusage\"\n"); (void)ex_puts(sp, "For an ex command usage statement enter \":exusage [cmd]\"\n"); (void)ex_puts(sp, "For a vi key usage statement enter \":viusage [key]\"\n"); (void)ex_puts(sp, "To exit, enter \":q!\"\n"); return (0); } /* * ex_usage -- :exusage [cmd] * Display ex usage strings. * * PUBLIC: int ex_usage __P((SCR *, EXCMD *)); */ int ex_usage(sp, cmdp) SCR *sp; EXCMD *cmdp; { ARGS *ap; EXCMDLIST const *cp; int newscreen; char *name, *p, nb[MAXCMDNAMELEN + 5]; switch (cmdp->argc) { case 1: ap = cmdp->argv[0]; if (isupper(ap->bp[0])) { newscreen = 1; ap->bp[0] = tolower(ap->bp[0]); } else newscreen = 0; for (cp = cmds; cp->name != NULL && memcmp(ap->bp, cp->name, ap->len); ++cp); if (cp->name == NULL || newscreen && !F_ISSET(cp, E_NEWSCREEN)) { if (newscreen) ap->bp[0] = toupper(ap->bp[0]); (void)ex_printf(sp, "The %.*s command is unknown\n", (int)ap->len, ap->bp); } else { (void)ex_printf(sp, "Command: %s\n Usage: %s\n", cp->help, cp->usage); /* * !!! * The "visual" command has two modes, one from ex, * one from the vi colon line. Don't ask. */ if (cp != &cmds[C_VISUAL_EX] && cp != &cmds[C_VISUAL_VI]) break; if (cp == &cmds[C_VISUAL_EX]) cp = &cmds[C_VISUAL_VI]; else cp = &cmds[C_VISUAL_EX]; (void)ex_printf(sp, "Command: %s\n Usage: %s\n", cp->help, cp->usage); } break; case 0: for (cp = cmds; cp->name != NULL && !INTERRUPTED(sp); ++cp) { /* * The ^D command has an unprintable name. * * XXX * We display both capital and lower-case versions of * the appropriate commands -- no need to add in extra * room, they're all short names. */ if (cp == &cmds[C_SCROLL]) name = "^D"; else if (F_ISSET(cp, E_NEWSCREEN)) { nb[0] = '['; nb[1] = toupper(cp->name[0]); nb[2] = cp->name[0]; nb[3] = ']'; for (name = cp->name + 1, p = nb + 4; (*p++ = *name++) != '\0';); name = nb; } else name = cp->name; (void)ex_printf(sp, "%*s: %s\n", MAXCMDNAMELEN, name, cp->help); } break; default: abort(); } return (0); } /* * ex_viusage -- :viusage [key] * Display vi usage strings. * * PUBLIC: int ex_viusage __P((SCR *, EXCMD *)); */ int ex_viusage(sp, cmdp) SCR *sp; EXCMD *cmdp; { GS *gp; VIKEYS const *kp; int key; gp = sp->gp; switch (cmdp->argc) { case 1: if (cmdp->argv[0]->len != 1) { ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } key = cmdp->argv[0]->bp[0]; if (key > MAXVIKEY) goto nokey; /* Special case: '[' and ']' commands. */ if ((key == '[' || key == ']') && cmdp->argv[0]->bp[1] != key) goto nokey; /* Special case: ~ command. */ if (key == '~' && O_ISSET(sp, O_TILDEOP)) kp = &tmotion; else kp = &vikeys[key]; if (kp->usage == NULL) nokey: (void)ex_printf(sp, "The %s key has no current meaning\n", KEY_NAME(sp, key)); else (void)ex_printf(sp, " Key:%s%s\nUsage: %s\n", isblank(*kp->help) ? "" : " ", kp->help, kp->usage); break; case 0: for (key = 0; key <= MAXVIKEY && !INTERRUPTED(sp); ++key) { /* Special case: ~ command. */ if (key == '~' && O_ISSET(sp, O_TILDEOP)) kp = &tmotion; else kp = &vikeys[key]; if (kp->help != NULL) (void)ex_printf(sp, "%s\n", kp->help); } break; default: abort(); } return (0); } vigor-0.016.orig/ex/ex_subst.c0100644000076400007640000010501307103707265014711 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_subst.c 10.37 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #define SUB_FIRST 0x01 /* The 'r' flag isn't reasonable. */ #define SUB_MUSTSETR 0x02 /* The 'r' flag is required. */ static int re_conv __P((SCR *, char **, size_t *, int *)); static int re_cscope_conv __P((SCR *, char **, size_t *, int *)); static int re_sub __P((SCR *, char *, char **, size_t *, size_t *, regmatch_t [10])); static int re_tag_conv __P((SCR *, char **, size_t *, int *)); static int s __P((SCR *, EXCMD *, char *, regex_t *, u_int)); /* * ex_s -- * [line [,line]] s[ubstitute] [[/;]pat[/;]/repl[/;] [cgr] [count] [#lp]] * * Substitute on lines matching a pattern. * * PUBLIC: int ex_s __P((SCR *, EXCMD *)); */ int ex_s(sp, cmdp) SCR *sp; EXCMD *cmdp; { regex_t *re; size_t blen, len; u_int flags; int delim; char *bp, *ptrn, *rep, *p, *t; /* * Skip leading white space. * * !!! * Historic vi allowed any non-alphanumeric to serve as the * substitution command delimiter. * * !!! * If the arguments are empty, it's the same as &, i.e. we * repeat the last substitution. */ if (cmdp->argc == 0) goto subagain; for (p = cmdp->argv[0]->bp, len = cmdp->argv[0]->len; len > 0; --len, ++p) { if (!isblank(*p)) break; } if (len == 0) subagain: return (ex_subagain(sp, cmdp)); delim = *p++; if (isalnum(delim) || delim == '\\') return (s(sp, cmdp, p, &sp->subre_c, SUB_MUSTSETR)); /* * !!! * The full-blown substitute command reset the remembered * state of the 'c' and 'g' suffices. */ sp->c_suffix = sp->g_suffix = 0; /* * Get the pattern string, toss escaping characters. * * !!! * Historic vi accepted any of the following forms: * * :s/abc/def/ change "abc" to "def" * :s/abc/def change "abc" to "def" * :s/abc/ delete "abc" * :s/abc delete "abc" * * QUOTING NOTE: * * Only toss an escaping character if it escapes a delimiter. * This means that "s/A/\\\\f" replaces "A" with "\\f". It * would be nice to be more regular, i.e. for each layer of * escaping a single escaping character is removed, but that's * not how the historic vi worked. */ for (ptrn = t = p;;) { if (p[0] == '\0' || p[0] == delim) { if (p[0] == delim) ++p; /* * !!! * Nul terminate the pattern string -- it's passed * to regcomp which doesn't understand anything else. */ *t = '\0'; break; } if (p[0] == '\\') if (p[1] == delim) ++p; else if (p[1] == '\\') *t++ = *p++; *t++ = *p++; } /* * If the pattern string is empty, use the last RE (not just the * last substitution RE). */ if (*ptrn == '\0') { if (sp->re == NULL) { ex_emsg(sp, NULL, EXM_NOPREVRE); return (1); } /* Re-compile the RE if necessary. */ if (!F_ISSET(sp, SC_RE_SEARCH) && re_compile(sp, sp->re, sp->re_len, NULL, NULL, &sp->re_c, RE_C_SEARCH)) return (1); flags = 0; } else { /* * !!! * Compile the RE. Historic practice is that substitutes set * the search direction as well as both substitute and search * RE's. We compile the RE twice, as we don't want to bother * ref counting the pattern string and (opaque) structure. */ if (re_compile(sp, ptrn, t - ptrn, &sp->re, &sp->re_len, &sp->re_c, RE_C_SEARCH)) return (1); if (re_compile(sp, ptrn, t - ptrn, &sp->subre, &sp->subre_len, &sp->subre_c, RE_C_SUBST)) return (1); flags = SUB_FIRST; sp->searchdir = FORWARD; } re = &sp->re_c; /* * Get the replacement string. * * The special character & (\& if O_MAGIC not set) matches the * entire RE. No handling of & is required here, it's done by * re_sub(). * * The special character ~ (\~ if O_MAGIC not set) inserts the * previous replacement string into this replacement string. * Count ~'s to figure out how much space we need. We could * special case nonexistent last patterns or whether or not * O_MAGIC is set, but it's probably not worth the effort. * * QUOTING NOTE: * * Only toss an escaping character if it escapes a delimiter or * if O_MAGIC is set and it escapes a tilde. * * !!! * If the entire replacement pattern is "%", then use the last * replacement pattern. This semantic was added to vi in System * V and then percolated elsewhere, presumably around the time * that it was added to their version of ed(1). */ if (p[0] == '\0' || p[0] == delim) { if (p[0] == delim) ++p; if (sp->repl != NULL) free(sp->repl); sp->repl = NULL; sp->repl_len = 0; } else if (p[0] == '%' && (p[1] == '\0' || p[1] == delim)) p += p[1] == delim ? 2 : 1; else { for (rep = p, len = 0; p[0] != '\0' && p[0] != delim; ++p, ++len) if (p[0] == '~') len += sp->repl_len; GET_SPACE_RET(sp, bp, blen, len); for (t = bp, len = 0, p = rep;;) { if (p[0] == '\0' || p[0] == delim) { if (p[0] == delim) ++p; break; } if (p[0] == '\\') { if (p[1] == delim) ++p; else if (p[1] == '\\') { *t++ = *p++; ++len; } else if (p[1] == '~') { ++p; if (!O_ISSET(sp, O_MAGIC)) goto tilde; } } else if (p[0] == '~' && O_ISSET(sp, O_MAGIC)) { tilde: ++p; memcpy(t, sp->repl, sp->repl_len); t += sp->repl_len; len += sp->repl_len; continue; } *t++ = *p++; ++len; } if ((sp->repl_len = len) != 0) { if (sp->repl != NULL) free(sp->repl); if ((sp->repl = malloc(len)) == NULL) { msgq(sp, M_SYSERR, NULL); FREE_SPACE(sp, bp, blen); return (1); } memcpy(sp->repl, bp, len); } FREE_SPACE(sp, bp, blen); } return (s(sp, cmdp, p, re, flags)); } /* * ex_subagain -- * [line [,line]] & [cgr] [count] [#lp]] * * Substitute using the last substitute RE and replacement pattern. * * PUBLIC: int ex_subagain __P((SCR *, EXCMD *)); */ int ex_subagain(sp, cmdp) SCR *sp; EXCMD *cmdp; { if (sp->subre == NULL) { ex_emsg(sp, NULL, EXM_NOPREVRE); return (1); } if (!F_ISSET(sp, SC_RE_SUBST) && re_compile(sp, sp->subre, sp->subre_len, NULL, NULL, &sp->subre_c, RE_C_SUBST)) return (1); return (s(sp, cmdp, cmdp->argc ? cmdp->argv[0]->bp : NULL, &sp->subre_c, 0)); } /* * ex_subtilde -- * [line [,line]] ~ [cgr] [count] [#lp]] * * Substitute using the last RE and last substitute replacement pattern. * * PUBLIC: int ex_subtilde __P((SCR *, EXCMD *)); */ int ex_subtilde(sp, cmdp) SCR *sp; EXCMD *cmdp; { if (sp->re == NULL) { ex_emsg(sp, NULL, EXM_NOPREVRE); return (1); } if (!F_ISSET(sp, SC_RE_SEARCH) && re_compile(sp, sp->re, sp->re_len, NULL, NULL, &sp->re_c, RE_C_SEARCH)) return (1); return (s(sp, cmdp, cmdp->argc ? cmdp->argv[0]->bp : NULL, &sp->re_c, 0)); } /* * s -- * Do the substitution. This stuff is *really* tricky. There are lots of * special cases, and general nastiness. Don't mess with it unless you're * pretty confident. * * The nasty part of the substitution is what happens when the replacement * string contains newlines. It's a bit tricky -- consider the information * that has to be retained for "s/f\(o\)o/^M\1^M\1/". The solution here is * to build a set of newline offsets which we use to break the line up later, * when the replacement is done. Don't change it unless you're *damned* * confident. */ #define NEEDNEWLINE(sp) { \ if (sp->newl_len == sp->newl_cnt) { \ sp->newl_len += 25; \ REALLOC(sp, sp->newl, size_t *, \ sp->newl_len * sizeof(size_t)); \ if (sp->newl == NULL) { \ sp->newl_len = 0; \ return (1); \ } \ } \ } #define BUILD(sp, l, len) { \ if (lbclen + (len) > lblen) { \ lblen += MAX(lbclen + (len), 256); \ REALLOC(sp, lb, char *, lblen); \ if (lb == NULL) { \ lbclen = 0; \ return (1); \ } \ } \ memcpy(lb + lbclen, l, len); \ lbclen += len; \ } #define NEEDSP(sp, len, pnt) { \ if (lbclen + (len) > lblen) { \ lblen += MAX(lbclen + (len), 256); \ REALLOC(sp, lb, char *, lblen); \ if (lb == NULL) { \ lbclen = 0; \ return (1); \ } \ pnt = lb + lbclen; \ } \ } static int s(sp, cmdp, s, re, flags) SCR *sp; EXCMD *cmdp; char *s; regex_t *re; u_int flags; { EVENT ev; MARK from, to; TEXTH tiq; recno_t elno, lno, slno; regmatch_t match[10]; size_t blen, cnt, last, lbclen, lblen, len, llen; size_t offset, saved_offset, scno; int cflag, lflag, nflag, pflag, rflag; int didsub, do_eol_match, eflags, empty_ok, eval; int linechanged, matched, quit, rval; char *bp, *lb; NEEDFILE(sp, cmdp); slno = sp->lno; scno = sp->cno; /* * !!! * Historically, the 'g' and 'c' suffices were always toggled as flags, * so ":s/A/B/" was the same as ":s/A/B/ccgg". If O_EDCOMPATIBLE was * not set, they were initialized to 0 for all substitute commands. If * O_EDCOMPATIBLE was set, they were initialized to 0 only if the user * specified substitute/replacement patterns (see ex_s()). */ if (!O_ISSET(sp, O_EDCOMPATIBLE)) sp->c_suffix = sp->g_suffix = 0; /* * Historic vi permitted the '#', 'l' and 'p' options in vi mode, but * it only displayed the last change. I'd disallow them, but they are * useful in combination with the [v]global commands. In the current * model the problem is combining them with the 'c' flag -- the screen * would have to flip back and forth between the confirm screen and the * ex print screen, which would be pretty awful. We do display all * changes, though, for what that's worth. * * !!! * Historic vi was fairly strict about the order of "options", the * count, and "flags". I'm somewhat fuzzy on the difference between * options and flags, anyway, so this is a simpler approach, and we * just take it them in whatever order the user gives them. (The ex * usage statement doesn't reflect this.) */ cflag = lflag = nflag = pflag = rflag = 0; if (s == NULL) goto noargs; for (lno = OOBLNO; *s != '\0'; ++s) switch (*s) { case ' ': case '\t': continue; case '+': ++cmdp->flagoff; break; case '-': --cmdp->flagoff; break; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': if (lno != OOBLNO) goto usage; errno = 0; lno = strtoul(s, &s, 10); if (*s == '\0') /* Loop increment correction. */ --s; if (errno == ERANGE) { if (lno == LONG_MAX) msgq(sp, M_ERR, "153|Count overflow"); else if (lno == LONG_MIN) msgq(sp, M_ERR, "154|Count underflow"); else msgq(sp, M_SYSERR, NULL); return (1); } /* * In historic vi, the count was inclusive from the * second address. */ cmdp->addr1.lno = cmdp->addr2.lno; cmdp->addr2.lno += lno - 1; if (!db_exist(sp, cmdp->addr2.lno) && db_last(sp, &cmdp->addr2.lno)) return (1); break; case '#': nflag = 1; break; case 'c': sp->c_suffix = !sp->c_suffix; /* Ex text structure initialization. */ if (F_ISSET(sp, SC_EX)) { memset(&tiq, 0, sizeof(TEXTH)); CIRCLEQ_INIT(&tiq); } break; case 'g': sp->g_suffix = !sp->g_suffix; break; case 'l': lflag = 1; break; case 'p': pflag = 1; break; case 'r': if (LF_ISSET(SUB_FIRST)) { msgq(sp, M_ERR, "155|Regular expression specified; r flag meaningless"); return (1); } if (!F_ISSET(sp, SC_RE_SEARCH)) { ex_emsg(sp, NULL, EXM_NOPREVRE); return (1); } rflag = 1; re = &sp->re_c; break; default: goto usage; } if (*s != '\0' || !rflag && LF_ISSET(SUB_MUSTSETR)) { usage: ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } noargs: if (F_ISSET(sp, SC_VI) && sp->c_suffix && (lflag || nflag || pflag)) { msgq(sp, M_ERR, "156|The #, l and p flags may not be combined with the c flag in vi mode"); return (1); } /* * bp: if interactive, line cache * blen: if interactive, line cache length * lb: build buffer pointer. * lbclen: current length of built buffer. * lblen; length of build buffer. */ bp = lb = NULL; blen = lbclen = lblen = 0; /* For each line... */ for (matched = quit = 0, lno = cmdp->addr1.lno, elno = cmdp->addr2.lno; !quit && lno <= elno; ++lno) { /* Someone's unhappy, time to stop. */ if (INTERRUPTED(sp)) break; /* Get the line. */ if (db_get(sp, lno, DBG_FATAL, &s, &llen)) goto err; /* * Make a local copy if doing confirmation -- when calling * the confirm routine we're likely to lose the cached copy. */ if (sp->c_suffix) { if (bp == NULL) { GET_SPACE_RET(sp, bp, blen, llen); } else ADD_SPACE_RET(sp, bp, blen, llen); memcpy(bp, s, llen); s = bp; } /* Start searching from the beginning. */ offset = 0; len = llen; /* Reset the build buffer offset. */ lbclen = 0; /* Reset empty match flag. */ empty_ok = 1; /* * We don't want to have to do a setline if the line didn't * change -- keep track of whether or not this line changed. * If doing confirmations, don't want to keep setting the * line if change is refused -- keep track of substitutions. */ didsub = linechanged = 0; /* New line, do an EOL match. */ do_eol_match = 1; /* It's not nul terminated, but we pretend it is. */ eflags = REG_STARTEND; /* * The search area is from s + offset to the EOL. * * Generally, match[0].rm_so is the offset of the start * of the match from the start of the search, and offset * is the offset of the start of the last search. */ nextmatch: match[0].rm_so = 0; match[0].rm_eo = len; /* Get the next match. */ eval = regexec(re, (char *)s + offset, 10, match, eflags); /* * There wasn't a match or if there was an error, deal with * it. If there was a previous match in this line, resolve * the changes into the database. Otherwise, just move on. */ if (eval == REG_NOMATCH) goto endmatch; if (eval != 0) { re_error(sp, eval, re); goto err; } matched = 1; /* Only the first search can match an anchored expression. */ eflags |= REG_NOTBOL; /* * !!! * It's possible to match 0-length strings -- for example, the * command s;a*;X;, when matched against the string "aabb" will * result in "XbXbX", i.e. the matches are "aa", the space * between the b's and the space between the b's and the end of * the string. There is a similar space between the beginning * of the string and the a's. The rule that we use (because vi * historically used it) is that any 0-length match, occurring * immediately after a match, is ignored. Otherwise, the above * example would have resulted in "XXbXbX". Another example is * incorrectly using " *" to replace groups of spaces with one * space. * * The way we do this is that if we just had a successful match, * the starting offset does not skip characters, and the match * is empty, ignore the match and move forward. If there's no * more characters in the string, we were attempting to match * after the last character, so quit. */ if (!empty_ok && match[0].rm_so == 0 && match[0].rm_eo == 0) { empty_ok = 1; if (len == 0) goto endmatch; BUILD(sp, s + offset, 1) ++offset; --len; goto nextmatch; } /* Confirm change. */ if (sp->c_suffix) { /* * Set the cursor position for confirmation. Note, * if we matched on a '$', the cursor may be past * the end of line. */ from.lno = to.lno = lno; from.cno = match[0].rm_so + offset; to.cno = match[0].rm_eo + offset; /* * Both ex and vi have to correct for a change before * the first character in the line. */ if (llen == 0) from.cno = to.cno = 0; if (F_ISSET(sp, SC_VI)) { /* * Only vi has to correct for a change after * the last character in the line. * * XXX * It would be nice to change the vi code so * that we could display a cursor past EOL. */ if (to.cno >= llen) to.cno = llen - 1; if (from.cno >= llen) from.cno = llen - 1; sp->lno = from.lno; sp->cno = from.cno; if (vs_refresh(sp, 1)) goto err; vs_update(sp, msg_cat(sp, "169|Confirm change? [n]", NULL), NULL); if (v_event_get(sp, &ev, 0, 0)) goto err; switch (ev.e_event) { case E_CHARACTER: break; case E_EOF: case E_ERR: case E_INTERRUPT: goto lquit; default: v_event_err(sp, &ev); goto lquit; } } else { if (ex_print(sp, cmdp, &from, &to, 0) || ex_scprint(sp, &from, &to)) goto lquit; if (ex_txt(sp, &tiq, 0, TXT_CR)) goto err; ev.e_c = tiq.cqh_first->lb[0]; } switch (ev.e_c) { case CH_YES: break; default: case CH_NO: didsub = 0; BUILD(sp, s +offset, match[0].rm_eo); goto skip; case CH_QUIT: /* Set the quit/interrupted flags. */ lquit: quit = 1; F_SET(sp->gp, G_INTERRUPTED); /* * Resolve any changes, then return to (and * exit from) the main loop. */ goto endmatch; } } /* * Set the cursor to the last position changed, converting * from 1-based to 0-based. */ sp->lno = lno; sp->cno = match[0].rm_so; /* Copy the bytes before the match into the build buffer. */ BUILD(sp, s + offset, match[0].rm_so); /* Substitute the matching bytes. */ didsub = 1; if (re_sub(sp, s + offset, &lb, &lbclen, &lblen, match)) goto err; /* Set the change flag so we know this line was modified. */ linechanged = 1; /* Move past the matched bytes. */ skip: offset += match[0].rm_eo; len -= match[0].rm_eo; /* A match cannot be followed by an empty pattern. */ empty_ok = 0; /* * If doing a global change with confirmation, we have to * update the screen. The basic idea is to store the line * so the screen update routines can find it, and restart. */ if (didsub && sp->c_suffix && sp->g_suffix) { /* * The new search offset will be the end of the * modified line. */ saved_offset = lbclen; /* Copy the rest of the line. */ if (len) BUILD(sp, s + offset, len) /* Set the new offset. */ offset = saved_offset; /* Store inserted lines, adjusting the build buffer. */ last = 0; if (sp->newl_cnt) { for (cnt = 0; cnt < sp->newl_cnt; ++cnt, ++lno, ++elno) { if (db_insert(sp, lno, lb + last, sp->newl[cnt] - last)) goto err; last = sp->newl[cnt] + 1; ++sp->rptlines[L_ADDED]; } lbclen -= last; offset -= last; sp->newl_cnt = 0; } /* Store and retrieve the line. */ if (db_set(sp, lno, lb + last, lbclen)) goto err; if (db_get(sp, lno, DBG_FATAL, &s, &llen)) goto err; ADD_SPACE_RET(sp, bp, blen, llen) memcpy(bp, s, llen); s = bp; len = llen - offset; /* Restart the build. */ lbclen = 0; BUILD(sp, s, offset); /* * If we haven't already done the after-the-string * match, do one. Set REG_NOTEOL so the '$' pattern * only matches once. */ if (!do_eol_match) goto endmatch; if (offset == len) { do_eol_match = 0; eflags |= REG_NOTEOL; } goto nextmatch; } /* * If it's a global: * * If at the end of the string, do a test for the after * the string match. Set REG_NOTEOL so the '$' pattern * only matches once. */ if (sp->g_suffix && do_eol_match) { if (len == 0) { do_eol_match = 0; eflags |= REG_NOTEOL; } goto nextmatch; } endmatch: if (!linechanged) continue; /* Copy any remaining bytes into the build buffer. */ if (len) BUILD(sp, s + offset, len) /* Store inserted lines, adjusting the build buffer. */ last = 0; if (sp->newl_cnt) { for (cnt = 0; cnt < sp->newl_cnt; ++cnt, ++lno, ++elno) { if (db_insert(sp, lno, lb + last, sp->newl[cnt] - last)) goto err; last = sp->newl[cnt] + 1; ++sp->rptlines[L_ADDED]; } lbclen -= last; sp->newl_cnt = 0; } /* Store the changed line. */ if (db_set(sp, lno, lb + last, lbclen)) goto err; /* Update changed line counter. */ if (sp->rptlchange != lno) { sp->rptlchange = lno; ++sp->rptlines[L_CHANGED]; } /* * !!! * Display as necessary. Historic practice is to only * display the last line of a line split into multiple * lines. */ if (lflag || nflag || pflag) { from.lno = to.lno = lno; from.cno = to.cno = 0; if (lflag) (void)ex_print(sp, cmdp, &from, &to, E_C_LIST); if (nflag) (void)ex_print(sp, cmdp, &from, &to, E_C_HASH); if (pflag) (void)ex_print(sp, cmdp, &from, &to, E_C_PRINT); } } /* * !!! * Historically, vi attempted to leave the cursor at the same place if * the substitution was done at the current cursor position. Otherwise * it moved it to the first non-blank of the last line changed. There * were some problems: for example, :s/$/foo/ with the cursor on the * last character of the line left the cursor on the last character, or * the & command with multiple occurrences of the matching string in the * line usually left the cursor in a fairly random position. * * We try to do the same thing, with the exception that if the user is * doing substitution with confirmation, we move to the last line about * which the user was consulted, as opposed to the last line that they * actually changed. This prevents a screen flash if the user doesn't * change many of the possible lines. */ if (!sp->c_suffix && (sp->lno != slno || sp->cno != scno)) { sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); } /* * If not in a global command, and nothing matched, say so. * Else, if none of the lines displayed, put something up. */ rval = 0; if (!matched) { if (!F_ISSET(sp, SC_EX_GLOBAL)) { msgq(sp, M_ERR, "157|No match found"); goto err; } } else if (!lflag && !nflag && !pflag) F_SET(cmdp, E_AUTOPRINT); if (0) { err: rval = 1; } if (bp != NULL) FREE_SPACE(sp, bp, blen); if (lb != NULL) free(lb); return (rval); } /* * re_compile -- * Compile the RE. * * PUBLIC: int re_compile __P((SCR *, * PUBLIC: char *, size_t, char **, size_t *, regex_t *, u_int)); */ int re_compile(sp, ptrn, plen, ptrnp, lenp, rep, flags) SCR *sp; char *ptrn, **ptrnp; size_t plen, *lenp; regex_t *rep; u_int flags; { size_t len; int reflags, replaced, rval; char *p; /* Set RE flags. */ reflags = 0; if (!LF_ISSET(RE_C_CSCOPE | RE_C_TAG)) { if (O_ISSET(sp, O_EXTENDED)) reflags |= REG_EXTENDED; if (O_ISSET(sp, O_IGNORECASE)) reflags |= REG_ICASE; if (O_ISSET(sp, O_ICLOWER)) { for (p = ptrn, len = plen; len > 0; ++p, --len) if (isupper(*p)) break; if (len == 0) reflags |= REG_ICASE; } } /* If we're replacing a saved value, clear the old one. */ if (LF_ISSET(RE_C_SEARCH) && F_ISSET(sp, SC_RE_SEARCH)) { regfree(&sp->re_c); F_CLR(sp, SC_RE_SEARCH); } if (LF_ISSET(RE_C_SUBST) && F_ISSET(sp, SC_RE_SUBST)) { regfree(&sp->subre_c); F_CLR(sp, SC_RE_SUBST); } /* * If we're saving the string, it's a pattern we haven't seen before, * so convert the vi-style RE's to POSIX 1003.2 RE's. Save a copy for * later recompilation. Free any previously saved value. */ if (ptrnp != NULL) { if (LF_ISSET(RE_C_CSCOPE)) { if (re_cscope_conv(sp, &ptrn, &plen, &replaced)) return (1); /* * XXX * Currently, the match-any- expression used in * re_cscope_conv() requires extended RE's. This may * not be right or safe. */ reflags |= REG_EXTENDED; } else if (LF_ISSET(RE_C_TAG)) { if (re_tag_conv(sp, &ptrn, &plen, &replaced)) return (1); } else if (re_conv(sp, &ptrn, &plen, &replaced)) return (1); /* Discard previous pattern. */ if (*ptrnp != NULL) { free(*ptrnp); *ptrnp = NULL; } if (lenp != NULL) *lenp = plen; /* * Copy the string into allocated memory. * * XXX * Regcomp isn't 8-bit clean, so the pattern is nul-terminated * for now. There's just no other solution. */ MALLOC(sp, *ptrnp, char *, plen + 1); if (*ptrnp != NULL) { memcpy(*ptrnp, ptrn, plen); (*ptrnp)[plen] = '\0'; } /* Free up conversion-routine-allocated memory. */ if (replaced) FREE_SPACE(sp, ptrn, 0); if (*ptrnp == NULL) return (1); ptrn = *ptrnp; } /* * XXX * Regcomp isn't 8-bit clean, so we just lost if the pattern * contained a nul. Bummer! */ if ((rval = regcomp(rep, ptrn, /* plen, */ reflags)) != 0) { if (!LF_ISSET(RE_C_SILENT)) re_error(sp, rval, rep); return (1); } if (LF_ISSET(RE_C_SEARCH)) F_SET(sp, SC_RE_SEARCH); if (LF_ISSET(RE_C_SUBST)) F_SET(sp, SC_RE_SUBST); return (0); } /* * re_conv -- * Convert vi's regular expressions into something that the * the POSIX 1003.2 RE functions can handle. * * There are three conversions we make to make vi's RE's (specifically * the global, search, and substitute patterns) work with POSIX RE's. * * 1: If O_MAGIC is not set, strip backslashes from the magic character * set (.[*~) that have them, and add them to the ones that don't. * 2: If O_MAGIC is not set, the string "\~" is replaced with the text * from the last substitute command's replacement string. If O_MAGIC * is set, it's the string "~". * 3: The pattern \ does "word" searches, convert it to use the * new RE escapes. * * !!!/XXX * This doesn't exactly match the historic behavior of vi because we do * the ~ substitution before calling the RE engine, so magic characters * in the replacement string will be expanded by the RE engine, and they * weren't historically. It's a bug. */ static int re_conv(sp, ptrnp, plenp, replacedp) SCR *sp; char **ptrnp; size_t *plenp; int *replacedp; { size_t blen, len, needlen; int magic; char *bp, *p, *t; /* * First pass through, we figure out how much space we'll need. * We do it in two passes, on the grounds that most of the time * the user is doing a search and won't have magic characters. * That way we can skip most of the memory allocation and copies. */ magic = 0; for (p = *ptrnp, len = *plenp, needlen = 0; len > 0; ++p, --len) switch (*p) { case '\\': if (len > 1) { --len; switch (*++p) { case '<': magic = 1; needlen += sizeof(RE_WSTART); break; case '>': magic = 1; needlen += sizeof(RE_WSTOP); break; case '~': if (!O_ISSET(sp, O_MAGIC)) { magic = 1; needlen += sp->repl_len; } break; case '.': case '[': case '*': if (!O_ISSET(sp, O_MAGIC)) { magic = 1; needlen += 1; } break; default: needlen += 2; } } else needlen += 1; break; case '~': if (O_ISSET(sp, O_MAGIC)) { magic = 1; needlen += sp->repl_len; } break; case '.': case '[': case '*': if (!O_ISSET(sp, O_MAGIC)) { magic = 1; needlen += 2; } break; default: needlen += 1; break; } if (!magic) { *replacedp = 0; return (0); } /* Get enough memory to hold the final pattern. */ *replacedp = 1; GET_SPACE_RET(sp, bp, blen, needlen); for (p = *ptrnp, len = *plenp, t = bp; len > 0; ++p, --len) switch (*p) { case '\\': if (len > 1) { --len; switch (*++p) { case '<': memcpy(t, RE_WSTART, sizeof(RE_WSTART) - 1); t += sizeof(RE_WSTART) - 1; break; case '>': memcpy(t, RE_WSTOP, sizeof(RE_WSTOP) - 1); t += sizeof(RE_WSTOP) - 1; break; case '~': if (O_ISSET(sp, O_MAGIC)) *t++ = '~'; else { memcpy(t, sp->repl, sp->repl_len); t += sp->repl_len; } break; case '.': case '[': case '*': if (O_ISSET(sp, O_MAGIC)) *t++ = '\\'; *t++ = *p; break; default: *t++ = '\\'; *t++ = *p; } } else *t++ = '\\'; break; case '~': if (O_ISSET(sp, O_MAGIC)) { memcpy(t, sp->repl, sp->repl_len); t += sp->repl_len; } else *t++ = '~'; break; case '.': case '[': case '*': if (!O_ISSET(sp, O_MAGIC)) *t++ = '\\'; *t++ = *p; break; default: *t++ = *p; break; } *ptrnp = bp; *plenp = t - bp; return (0); } /* * re_tag_conv -- * Convert a tags search path into something that the POSIX * 1003.2 RE functions can handle. */ static int re_tag_conv(sp, ptrnp, plenp, replacedp) SCR *sp; char **ptrnp; size_t *plenp; int *replacedp; { size_t blen, len; int lastdollar; char *bp, *p, *t; len = *plenp; /* Max memory usage is 2 times the length of the string. */ *replacedp = 1; GET_SPACE_RET(sp, bp, blen, len * 2); p = *ptrnp; t = bp; /* If the last character is a '/' or '?', we just strip it. */ if (len > 0 && (p[len - 1] == '/' || p[len - 1] == '?')) --len; /* If the next-to-last or last character is a '$', it's magic. */ if (len > 0 && p[len - 1] == '$') { --len; lastdollar = 1; } else lastdollar = 0; /* If the first character is a '/' or '?', we just strip it. */ if (len > 0 && (p[0] == '/' || p[0] == '?')) { ++p; --len; } /* If the first or second character is a '^', it's magic. */ if (p[0] == '^') { *t++ = *p++; --len; } /* * Escape every other magic character we can find, meanwhile stripping * the backslashes ctags inserts when escaping the search delimiter * characters. */ for (; len > 0; --len) { if (p[0] == '\\' && (p[1] == '/' || p[1] == '?')) { ++p; --len; } else if (strchr("^.[]$*", p[0])) *t++ = '\\'; *t++ = *p++; } if (lastdollar) *t++ = '$'; *ptrnp = bp; *plenp = t - bp; return (0); } /* * re_cscope_conv -- * Convert a cscope search path into something that the POSIX * 1003.2 RE functions can handle. */ static int re_cscope_conv(sp, ptrnp, plenp, replacedp) SCR *sp; char **ptrnp; size_t *plenp; int *replacedp; { size_t blen, len, nspaces; char *bp, *p, *t; /* * Each space in the source line printed by cscope represents an * arbitrary sequence of spaces, tabs, and comments. */ #define CSCOPE_RE_SPACE "([ \t]|/\\*([^*]|\\*/)*\\*/)*" for (nspaces = 0, p = *ptrnp, len = *plenp; len > 0; ++p, --len) if (*p == ' ') ++nspaces; /* * Allocate plenty of space: * the string, plus potential escaping characters; * nspaces + 2 copies of CSCOPE_RE_SPACE; * ^, $, nul terminator characters. */ *replacedp = 1; len = (p - *ptrnp) * 2 + (nspaces + 2) * sizeof(CSCOPE_RE_SPACE) + 3; GET_SPACE_RET(sp, bp, blen, len); p = *ptrnp; t = bp; *t++ = '^'; memcpy(t, CSCOPE_RE_SPACE, sizeof(CSCOPE_RE_SPACE) - 1); t += sizeof(CSCOPE_RE_SPACE) - 1; for (len = *plenp; len > 0; ++p, --len) if (*p == ' ') { memcpy(t, CSCOPE_RE_SPACE, sizeof(CSCOPE_RE_SPACE) - 1); t += sizeof(CSCOPE_RE_SPACE) - 1; } else { if (strchr("\\^.[]$*+?()|{}", *p)) *t++ = '\\'; *t++ = *p; } memcpy(t, CSCOPE_RE_SPACE, sizeof(CSCOPE_RE_SPACE) - 1); t += sizeof(CSCOPE_RE_SPACE) - 1; *t++ = '$'; *ptrnp = bp; *plenp = t - bp; return (0); } /* * re_error -- * Report a regular expression error. * * PUBLIC: void re_error __P((SCR *, int, regex_t *)); */ void re_error(sp, errcode, preg) SCR *sp; int errcode; regex_t *preg; { size_t s; char *oe; s = regerror(errcode, preg, "", 0); if ((oe = malloc(s)) == NULL) msgq(sp, M_SYSERR, NULL); else { (void)regerror(errcode, preg, oe, s); msgq(sp, M_ERR, "RE error: %s", oe); free(oe); } } /* * re_sub -- * Do the substitution for a regular expression. */ static int re_sub(sp, ip, lbp, lbclenp, lblenp, match) SCR *sp; char *ip; /* Input line. */ char **lbp; size_t *lbclenp, *lblenp; regmatch_t match[10]; { enum { C_NOTSET, C_LOWER, C_ONELOWER, C_ONEUPPER, C_UPPER } conv; size_t lbclen, lblen; /* Local copies. */ size_t mlen; /* Match length. */ size_t rpl; /* Remaining replacement length. */ char *rp; /* Replacement pointer. */ int ch; int no; /* Match replacement offset. */ char *p, *t; /* Buffer pointers. */ char *lb; /* Local copies. */ lb = *lbp; /* Get local copies. */ lbclen = *lbclenp; lblen = *lblenp; /* * QUOTING NOTE: * * There are some special sequences that vi provides in the * replacement patterns. * & string the RE matched (\& if nomagic set) * \# n-th regular subexpression * \E end \U, \L conversion * \e end \U, \L conversion * \l convert the next character to lower-case * \L convert to lower-case, until \E, \e, or end of replacement * \u convert the next character to upper-case * \U convert to upper-case, until \E, \e, or end of replacement * * Otherwise, since this is the lowest level of replacement, discard * all escaping characters. This (hopefully) matches historic practice. */ #define OUTCH(ch, nltrans) { \ CHAR_T __ch = (ch); \ u_int __value = KEY_VAL(sp, __ch); \ if (nltrans && (__value == K_CR || __value == K_NL)) { \ NEEDNEWLINE(sp); \ sp->newl[sp->newl_cnt++] = lbclen; \ } else if (conv != C_NOTSET) { \ switch (conv) { \ case C_ONELOWER: \ conv = C_NOTSET; \ /* FALLTHROUGH */ \ case C_LOWER: \ if (isupper(__ch)) \ __ch = tolower(__ch); \ break; \ case C_ONEUPPER: \ conv = C_NOTSET; \ /* FALLTHROUGH */ \ case C_UPPER: \ if (islower(__ch)) \ __ch = toupper(__ch); \ break; \ default: \ abort(); \ } \ } \ NEEDSP(sp, 1, p); \ *p++ = __ch; \ ++lbclen; \ } conv = C_NOTSET; for (rp = sp->repl, rpl = sp->repl_len, p = lb + lbclen; rpl--;) { switch (ch = *rp++) { case '&': if (O_ISSET(sp, O_MAGIC)) { no = 0; goto subzero; } break; case '\\': if (rpl == 0) break; --rpl; switch (ch = *rp) { case '&': ++rp; if (!O_ISSET(sp, O_MAGIC)) { no = 0; goto subzero; } break; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': no = *rp++ - '0'; subzero: if (match[no].rm_so == -1 || match[no].rm_eo == -1) break; mlen = match[no].rm_eo - match[no].rm_so; for (t = ip + match[no].rm_so; mlen--; ++t) OUTCH(*t, 0); continue; case 'e': case 'E': ++rp; conv = C_NOTSET; continue; case 'l': ++rp; conv = C_ONELOWER; continue; case 'L': ++rp; conv = C_LOWER; continue; case 'u': ++rp; conv = C_ONEUPPER; continue; case 'U': ++rp; conv = C_UPPER; continue; default: ++rp; break; } } OUTCH(ch, 1); } *lbp = lb; /* Update caller's information. */ *lbclenp = lbclen; *lblenp = lblen; return (0); } vigor-0.016.orig/ex/ex_tag.c0100644000076400007640000007215307103707266014335 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * This code is derived from software contributed to Berkeley by * David Hitz of Auspex Systems, Inc. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_tag.c 10.36 (Berkeley) 9/15/96"; #endif /* not lint */ #include #include /* XXX: param.h may not have included types.h */ #ifdef HAVE_SYS_MMAN_H #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #include "tag.h" static char *binary_search __P((char *, char *, char *)); static int compare __P((char *, char *, char *)); static void ctag_file __P((SCR *, TAGF *, char *, char **, size_t *)); static int ctag_search __P((SCR *, char *, size_t, char *)); static int ctag_sfile __P((SCR *, TAGF *, TAGQ *, char *)); static TAGQ *ctag_slist __P((SCR *, char *)); static char *linear_search __P((char *, char *, char *)); static int tag_copy __P((SCR *, TAG *, TAG **)); static int tag_pop __P((SCR *, TAGQ *, int)); static int tagf_copy __P((SCR *, TAGF *, TAGF **)); static int tagf_free __P((SCR *, TAGF *)); static int tagq_copy __P((SCR *, TAGQ *, TAGQ **)); /* * ex_tag_first -- * The tag code can be entered from main, e.g., "vi -t tag". * * PUBLIC: int ex_tag_first __P((SCR *, char *)); */ int ex_tag_first(sp, tagarg) SCR *sp; char *tagarg; { ARGS *ap[2], a; EXCMD cmd; /* Build an argument for the ex :tag command. */ ex_cinit(&cmd, C_TAG, 0, OOBLNO, OOBLNO, 0, ap); ex_cadd(&cmd, &a, tagarg, strlen(tagarg)); /* * XXX * Historic vi went ahead and created a temporary file when it failed * to find the tag. We match historic practice, but don't distinguish * between real error and failure to find the tag. */ if (ex_tag_push(sp, &cmd)) return (0); /* Display tags in the center of the screen. */ F_CLR(sp, SC_SCR_TOP); F_SET(sp, SC_SCR_CENTER); return (0); } /* * ex_tag_push -- ^] * :tag[!] [string] * * Enter a new TAGQ context based on a ctag string. * * PUBLIC: int ex_tag_push __P((SCR *, EXCMD *)); */ int ex_tag_push(sp, cmdp) SCR *sp; EXCMD *cmdp; { EX_PRIVATE *exp; FREF *frp; TAG *rtp; TAGQ *rtqp, *tqp; recno_t lno; size_t cno; long tl; int force, istmp; exp = EXP(sp); switch (cmdp->argc) { case 1: if (exp->tag_last != NULL) free(exp->tag_last); if ((exp->tag_last = strdup(cmdp->argv[0]->bp)) == NULL) { msgq(sp, M_SYSERR, NULL); return (1); } /* Taglength may limit the number of characters. */ if ((tl = O_VAL(sp, O_TAGLENGTH)) != 0 && strlen(exp->tag_last) > tl) exp->tag_last[tl] = '\0'; break; case 0: if (exp->tag_last == NULL) { msgq(sp, M_ERR, "158|No previous tag entered"); return (1); } break; default: abort(); } /* Get the tag information. */ if ((tqp = ctag_slist(sp, exp->tag_last)) == NULL) return (1); /* * Allocate all necessary memory before swapping screens. Initialize * flags so we know what to free. */ rtp = NULL; rtqp = NULL; if (exp->tq.cqh_first == (void *)&exp->tq) { /* Initialize the `local context' tag queue structure. */ CALLOC_GOTO(sp, rtqp, TAGQ *, 1, sizeof(TAGQ)); CIRCLEQ_INIT(&rtqp->tagq); /* Initialize and link in its tag structure. */ CALLOC_GOTO(sp, rtp, TAG *, 1, sizeof(TAG)); CIRCLEQ_INSERT_HEAD(&rtqp->tagq, rtp, q); rtqp->current = rtp; } /* * Stick the current context information in a convenient place, we're * about to lose it. Note, if we're called on editor startup, there * will be no FREF structure. */ frp = sp->frp; lno = sp->lno; cno = sp->cno; istmp = frp == NULL || F_ISSET(frp, FR_TMPFILE) && !F_ISSET(cmdp, E_NEWSCREEN); /* Try to switch to the tag. */ force = FL_ISSET(cmdp->iflags, E_C_FORCE); if (F_ISSET(cmdp, E_NEWSCREEN)) { if (ex_tag_Nswitch(sp, tqp->tagq.cqh_first, force)) goto err; /* Everything else gets done in the new screen. */ sp = sp->nextdisp; exp = EXP(sp); } else if (ex_tag_nswitch(sp, tqp->tagq.cqh_first, force)) goto err; /* * If this is the first tag, put a `current location' queue entry * in place, so we can pop all the way back to the current mark. * Note, it doesn't point to much of anything, it's a placeholder. */ if (exp->tq.cqh_first == (void *)&exp->tq) { CIRCLEQ_INSERT_HEAD(&exp->tq, rtqp, q); } else rtqp = exp->tq.cqh_first; /* Link the new TAGQ structure into place. */ CIRCLEQ_INSERT_HEAD(&exp->tq, tqp, q); (void)ctag_search(sp, tqp->current->search, tqp->current->slen, tqp->tag); /* * Move the current context from the temporary save area into the * right structure. * * If we were in a temporary file, we don't have a context to which * we can return, so just make it be the same as what we're moving * to. It will be a little odd that ^T doesn't change anything, but * I don't think it's a big deal. */ if (istmp) { rtqp->current->frp = sp->frp; rtqp->current->lno = sp->lno; rtqp->current->cno = sp->cno; } else { rtqp->current->frp = frp; rtqp->current->lno = lno; rtqp->current->cno = cno; } return (0); err: alloc_err: if (rtqp != NULL) free(rtqp); if (rtp != NULL) free(rtp); tagq_free(sp, tqp); return (1); } /* * ex_tag_next -- * Switch context to the next TAG. * * PUBLIC: int ex_tag_next __P((SCR *, EXCMD *)); */ int ex_tag_next(sp, cmdp) SCR *sp; EXCMD *cmdp; { EX_PRIVATE *exp; TAG *tp; TAGQ *tqp; exp = EXP(sp); if ((tqp = exp->tq.cqh_first) == (void *)&exp->tq) { tag_msg(sp, TAG_EMPTY, NULL); return (1); } if ((tp = tqp->current->q.cqe_next) == (void *)&tqp->tagq) { msgq(sp, M_ERR, "282|Already at the last tag of this group"); return (1); } if (ex_tag_nswitch(sp, tp, FL_ISSET(cmdp->iflags, E_C_FORCE))) return (1); tqp->current = tp; if (F_ISSET(tqp, TAG_CSCOPE)) (void)cscope_search(sp, tqp, tp); else (void)ctag_search(sp, tp->search, tp->slen, tqp->tag); return (0); } /* * ex_tag_prev -- * Switch context to the next TAG. * * PUBLIC: int ex_tag_prev __P((SCR *, EXCMD *)); */ int ex_tag_prev(sp, cmdp) SCR *sp; EXCMD *cmdp; { EX_PRIVATE *exp; TAG *tp; TAGQ *tqp; exp = EXP(sp); if ((tqp = exp->tq.cqh_first) == (void *)&exp->tq) { tag_msg(sp, TAG_EMPTY, NULL); return (0); } if ((tp = tqp->current->q.cqe_prev) == (void *)&tqp->tagq) { msgq(sp, M_ERR, "255|Already at the first tag of this group"); return (1); } if (ex_tag_nswitch(sp, tp, FL_ISSET(cmdp->iflags, E_C_FORCE))) return (1); tqp->current = tp; if (F_ISSET(tqp, TAG_CSCOPE)) (void)cscope_search(sp, tqp, tp); else (void)ctag_search(sp, tp->search, tp->slen, tqp->tag); return (0); } /* * ex_tag_nswitch -- * Switch context to the specified TAG. * * PUBLIC: int ex_tag_nswitch __P((SCR *, TAG *, int)); */ int ex_tag_nswitch(sp, tp, force) SCR *sp; TAG *tp; int force; { /* Get a file structure. */ if (tp->frp == NULL && (tp->frp = file_add(sp, tp->fname)) == NULL) return (1); /* If not changing files, return, we're done. */ if (tp->frp == sp->frp) return (0); /* Check for permission to leave. */ if (file_m1(sp, force, FS_ALL | FS_POSSIBLE)) return (1); /* Initialize the new file. */ if (file_init(sp, tp->frp, NULL, FS_SETALT)) return (1); /* Display tags in the center of the screen. */ F_CLR(sp, SC_SCR_TOP); F_SET(sp, SC_SCR_CENTER); /* Switch. */ F_SET(sp, SC_FSWITCH); return (0); } /* * ex_tag_Nswitch -- * Switch context to the specified TAG in a new screen. * * PUBLIC: int ex_tag_Nswitch __P((SCR *, TAG *, int)); */ int ex_tag_Nswitch(sp, tp, force) SCR *sp; TAG *tp; int force; { SCR *new; /* Get a file structure. */ if (tp->frp == NULL && (tp->frp = file_add(sp, tp->fname)) == NULL) return (1); /* Get a new screen. */ if (screen_init(sp->gp, sp, &new)) return (1); if (vs_split(sp, new, 0)) { (void)file_end(new, new->ep, 1); (void)screen_end(new); return (1); } /* Get a backing file. */ if (tp->frp == sp->frp) { /* Copy file state. */ new->ep = sp->ep; ++new->ep->refcnt; new->frp = tp->frp; new->frp->flags = sp->frp->flags; } else if (file_init(new, tp->frp, NULL, force)) { (void)vs_discard(new, NULL); (void)screen_end(new); return (1); } /* Create the argument list. */ new->cargv = new->argv = ex_buildargv(sp, NULL, tp->frp->name); /* Display tags in the center of the screen. */ F_CLR(new, SC_SCR_TOP); F_SET(new, SC_SCR_CENTER); /* Switch. */ sp->nextdisp = new; F_SET(sp, SC_SSWITCH); return (0); } /* * ex_tag_pop -- ^T * :tagp[op][!] [number | file] * * Pop to a previous TAGQ context. * * PUBLIC: int ex_tag_pop __P((SCR *, EXCMD *)); */ int ex_tag_pop(sp, cmdp) SCR *sp; EXCMD *cmdp; { EX_PRIVATE *exp; TAGQ *tqp, *dtqp; size_t arglen; long off; char *arg, *p, *t; /* Check for an empty stack. */ exp = EXP(sp); if (exp->tq.cqh_first == (void *)&exp->tq) { tag_msg(sp, TAG_EMPTY, NULL); return (1); } /* Find the last TAG structure that we're going to DISCARD! */ switch (cmdp->argc) { case 0: /* Pop one tag. */ dtqp = exp->tq.cqh_first; break; case 1: /* Name or number. */ arg = cmdp->argv[0]->bp; off = strtol(arg, &p, 10); if (*p != '\0') goto filearg; /* Number: pop that many queue entries. */ if (off < 1) return (0); for (tqp = exp->tq.cqh_first; tqp != (void *)&exp->tq && --off > 1; tqp = tqp->q.cqe_next); if (tqp == (void *)&exp->tq) { msgq(sp, M_ERR, "159|Less than %s entries on the tags stack; use :display t[ags]", arg); return (1); } dtqp = tqp; break; /* File argument: pop to that queue entry. */ filearg: arglen = strlen(arg); for (tqp = exp->tq.cqh_first; tqp != (void *)&exp->tq; dtqp = tqp, tqp = tqp->q.cqe_next) { /* Don't pop to the current file. */ if (tqp == exp->tq.cqh_first) continue; p = tqp->current->frp->name; if ((t = strrchr(p, '/')) == NULL) t = p; else ++t; if (!strncmp(arg, t, arglen)) break; } if (tqp == (void *)&exp->tq) { msgq_str(sp, M_ERR, arg, "160|No file %s on the tags stack to return to; use :display t[ags]"); return (1); } if (tqp == exp->tq.cqh_first) return (0); break; default: abort(); } return (tag_pop(sp, dtqp, FL_ISSET(cmdp->iflags, E_C_FORCE))); } /* * ex_tag_top -- :tagt[op][!] * Clear the tag stack. * * PUBLIC: int ex_tag_top __P((SCR *, EXCMD *)); */ int ex_tag_top(sp, cmdp) SCR *sp; EXCMD *cmdp; { EX_PRIVATE *exp; exp = EXP(sp); /* Check for an empty stack. */ if (exp->tq.cqh_first == (void *)&exp->tq) { tag_msg(sp, TAG_EMPTY, NULL); return (1); } /* Return to the oldest information. */ return (tag_pop(sp, exp->tq.cqh_last->q.cqe_prev, FL_ISSET(cmdp->iflags, E_C_FORCE))); } /* * tag_pop -- * Pop up to and including the specified TAGQ context. */ static int tag_pop(sp, dtqp, force) SCR *sp; TAGQ *dtqp; int force; { EX_PRIVATE *exp; TAG *tp; TAGQ *tqp; exp = EXP(sp); /* * Update the cursor from the saved TAG information of the TAG * structure we're moving to. */ tp = dtqp->q.cqe_next->current; if (tp->frp == sp->frp) { sp->lno = tp->lno; sp->cno = tp->cno; } else { if (file_m1(sp, force, FS_ALL | FS_POSSIBLE)) return (1); tp->frp->lno = tp->lno; tp->frp->cno = tp->cno; F_SET(sp->frp, FR_CURSORSET); if (file_init(sp, tp->frp, NULL, FS_SETALT)) return (1); F_SET(sp, SC_FSWITCH); } /* Pop entries off the queue up to and including dtqp. */ do { tqp = exp->tq.cqh_first; if (tagq_free(sp, tqp)) return (0); } while (tqp != dtqp); /* * If only a single tag left, we've returned to the first tag point, * and the stack is now empty. */ if (exp->tq.cqh_first->q.cqe_next == (void *)&exp->tq) tagq_free(sp, exp->tq.cqh_first); return (0); } /* * ex_tag_display -- * Display the list of tags. * * PUBLIC: int ex_tag_display __P((SCR *)); */ int ex_tag_display(sp) SCR *sp; { EX_PRIVATE *exp; TAG *tp; TAGQ *tqp; int cnt; size_t len; char *p, *sep; exp = EXP(sp); if ((tqp = exp->tq.cqh_first) == (void *)&exp->tq) { tag_msg(sp, TAG_EMPTY, NULL); return (0); } /* * We give the file name 20 columns and the search string the rest. * If there's not enough room, we don't do anything special, it's * not worth the effort, it just makes the display more confusing. * * We also assume that characters in file names map 1-1 to printing * characters. This might not be true, but I don't think it's worth * fixing. (The obvious fix is to pass the filenames through the * msg_print function.) */ #define L_NAME 30 /* Name. */ #define L_SLOP 4 /* Leading number plus trailing *. */ #define L_SPACE 5 /* Spaces after name, before tag. */ #define L_TAG 20 /* Tag. */ if (sp->cols <= L_NAME + L_SLOP) { msgq(sp, M_ERR, "292|Display too small."); return (0); } /* * Display the list of tags for each queue entry. The first entry * is numbered, and the current tag entry has an asterisk appended. */ for (cnt = 1, tqp = exp->tq.cqh_first; !INTERRUPTED(sp) && tqp != (void *)&exp->tq; ++cnt, tqp = tqp->q.cqe_next) for (tp = tqp->tagq.cqh_first; tp != (void *)&tqp->tagq; tp = tp->q.cqe_next) { if (tp == tqp->tagq.cqh_first) (void)ex_printf(sp, "%2d ", cnt); else (void)ex_printf(sp, " "); p = tp->frp == NULL ? tp->fname : tp->frp->name; if ((len = strlen(p)) > L_NAME) { len = len - (L_NAME - 4); (void)ex_printf(sp, " ... %*.*s", L_NAME - 4, L_NAME - 4, p + len); } else (void)ex_printf(sp, " %*.*s", L_NAME, L_NAME, p); if (tqp->current == tp) (void)ex_printf(sp, "*"); if (tp == tqp->tagq.cqh_first && tqp->tag != NULL && (sp->cols - L_NAME) >= L_TAG + L_SPACE) { len = strlen(tqp->tag); if (len > sp->cols - (L_NAME + L_SPACE)) len = sp->cols - (L_NAME + L_SPACE); (void)ex_printf(sp, "%s%.*s", tqp->current == tp ? " " : " ", (int)len, tqp->tag); } (void)ex_printf(sp, "\n"); } return (0); } /* * ex_tag_copy -- * Copy a screen's tag structures. * * PUBLIC: int ex_tag_copy __P((SCR *, SCR *)); */ int ex_tag_copy(orig, sp) SCR *orig, *sp; { EX_PRIVATE *oexp, *nexp; TAGQ *aqp, *tqp; TAG *ap, *tp; TAGF *atfp, *tfp; oexp = EXP(orig); nexp = EXP(sp); /* Copy tag queue and tags stack. */ for (aqp = oexp->tq.cqh_first; aqp != (void *)&oexp->tq; aqp = aqp->q.cqe_next) { if (tagq_copy(sp, aqp, &tqp)) return (1); for (ap = aqp->tagq.cqh_first; ap != (void *)&aqp->tagq; ap = ap->q.cqe_next) { if (tag_copy(sp, ap, &tp)) return (1); /* Set the current pointer. */ if (aqp->current == ap) tqp->current = tp; CIRCLEQ_INSERT_TAIL(&tqp->tagq, tp, q); } CIRCLEQ_INSERT_TAIL(&nexp->tq, tqp, q); } /* Copy list of tag files. */ for (atfp = oexp->tagfq.tqh_first; atfp != NULL; atfp = atfp->q.tqe_next) { if (tagf_copy(sp, atfp, &tfp)) return (1); TAILQ_INSERT_TAIL(&nexp->tagfq, tfp, q); } /* Copy the last tag. */ if (oexp->tag_last != NULL && (nexp->tag_last = strdup(oexp->tag_last)) == NULL) { msgq(sp, M_SYSERR, NULL); return (1); } return (0); } /* * tagf_copy -- * Copy a TAGF structure and return it in new memory. */ static int tagf_copy(sp, otfp, tfpp) SCR *sp; TAGF *otfp, **tfpp; { TAGF *tfp; MALLOC_RET(sp, tfp, TAGF *, sizeof(TAGF)); *tfp = *otfp; /* XXX: Allocate as part of the TAGF structure!!! */ if ((tfp->name = strdup(otfp->name)) == NULL) return (1); *tfpp = tfp; return (0); } /* * tagq_copy -- * Copy a TAGQ structure and return it in new memory. */ static int tagq_copy(sp, otqp, tqpp) SCR *sp; TAGQ *otqp, **tqpp; { TAGQ *tqp; size_t len; len = sizeof(TAGQ); if (otqp->tag != NULL) len += otqp->tlen + 1; MALLOC_RET(sp, tqp, TAGQ *, len); memcpy(tqp, otqp, len); CIRCLEQ_INIT(&tqp->tagq); tqp->current = NULL; if (otqp->tag != NULL) tqp->tag = tqp->buf; *tqpp = tqp; return (0); } /* * tag_copy -- * Copy a TAG structure and return it in new memory. */ static int tag_copy(sp, otp, tpp) SCR *sp; TAG *otp, **tpp; { TAG *tp; size_t len; len = sizeof(TAG); if (otp->fname != NULL) len += otp->fnlen + 1; if (otp->search != NULL) len += otp->slen + 1; MALLOC_RET(sp, tp, TAG *, len); memcpy(tp, otp, len); if (otp->fname != NULL) tp->fname = tp->buf; if (otp->search != NULL) tp->search = tp->fname + otp->fnlen + 1; *tpp = tp; return (0); } /* * tagf_free -- * Free a TAGF structure. */ static int tagf_free(sp, tfp) SCR *sp; TAGF *tfp; { EX_PRIVATE *exp; exp = EXP(sp); TAILQ_REMOVE(&exp->tagfq, tfp, q); free(tfp->name); free(tfp); return (0); } /* * tagq_free -- * Free a TAGQ structure (and associated TAG structures). * * PUBLIC: int tagq_free __P((SCR *, TAGQ *)); */ int tagq_free(sp, tqp) SCR *sp; TAGQ *tqp; { EX_PRIVATE *exp; TAG *tp; exp = EXP(sp); while ((tp = tqp->tagq.cqh_first) != (void *)&tqp->tagq) { CIRCLEQ_REMOVE(&tqp->tagq, tp, q); free(tp); } /* * !!! * If allocated and then the user failed to switch files, the TAGQ * structure was never attached to any list. */ if (tqp->q.cqe_next != NULL) CIRCLEQ_REMOVE(&exp->tq, tqp, q); free(tqp); return (0); } /* * tag_msg * A few common messages. * * PUBLIC: void tag_msg __P((SCR *, tagmsg_t, char *)); */ void tag_msg(sp, msg, tag) SCR *sp; tagmsg_t msg; char *tag; { switch (msg) { case TAG_BADLNO: msgq_str(sp, M_ERR, tag, "164|%s: the tag's line number is past the end of the file"); break; case TAG_EMPTY: msgq(sp, M_INFO, "165|The tags stack is empty"); break; case TAG_SEARCH: msgq_str(sp, M_ERR, tag, "166|%s: search pattern not found"); break; default: abort(); } } /* * ex_tagf_alloc -- * Create a new list of ctag files. * * PUBLIC: int ex_tagf_alloc __P((SCR *, char *)); */ int ex_tagf_alloc(sp, str) SCR *sp; char *str; { EX_PRIVATE *exp; TAGF *tfp; size_t len; char *p, *t; /* Free current queue. */ exp = EXP(sp); while ((tfp = exp->tagfq.tqh_first) != NULL) tagf_free(sp, tfp); /* Create new queue. */ for (p = t = str;; ++p) { if (*p == '\0' || isblank(*p)) { if ((len = p - t) > 1) { MALLOC_RET(sp, tfp, TAGF *, sizeof(TAGF)); MALLOC(sp, tfp->name, char *, len + 1); if (tfp->name == NULL) { free(tfp); return (1); } memcpy(tfp->name, t, len); tfp->name[len] = '\0'; tfp->flags = 0; TAILQ_INSERT_TAIL(&exp->tagfq, tfp, q); } t = p + 1; } if (*p == '\0') break; } return (0); } /* Free previous queue. */ /* * ex_tag_free -- * Free the ex tag information. * * PUBLIC: int ex_tag_free __P((SCR *)); */ int ex_tag_free(sp) SCR *sp; { EX_PRIVATE *exp; TAGF *tfp; TAGQ *tqp; /* Free up tag information. */ exp = EXP(sp); while ((tqp = exp->tq.cqh_first) != (void *)&exp->tq) tagq_free(sp, tqp); while ((tfp = exp->tagfq.tqh_first) != NULL) tagf_free(sp, tfp); if (exp->tag_last != NULL) free(exp->tag_last); return (0); } /* * ctag_search -- * Search a file for a tag. */ static int ctag_search(sp, search, slen, tag) SCR *sp; char *search, *tag; size_t slen; { MARK m; char *p; /* * !!! * The historic tags file format (from a long, long time ago...) * used a line number, not a search string. I got complaints, so * people are still using the format. POSIX 1003.2 permits it. */ if (isdigit(search[0])) { m.lno = atoi(search); if (!db_exist(sp, m.lno)) { tag_msg(sp, TAG_BADLNO, tag); return (1); } } else { /* * Search for the tag; cheap fallback for C functions * if the name is the same but the arguments have changed. */ m.lno = 1; m.cno = 0; if (f_search(sp, &m, &m, search, slen, NULL, SEARCH_FILE | SEARCH_TAG)) if ((p = strrchr(search, '(')) != NULL) { slen = p - search; if (f_search(sp, &m, &m, search, slen, NULL, SEARCH_FILE | SEARCH_TAG)) goto notfound; } else { notfound: tag_msg(sp, TAG_SEARCH, tag); return (1); } /* * !!! * Historically, tags set the search direction if it wasn't * already set. */ if (sp->searchdir == NOTSET) sp->searchdir = FORWARD; } /* * !!! * Tags move to the first non-blank, NOT the search pattern start. */ sp->lno = m.lno; sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); return (0); } /* * ctag_slist -- * Search the list of tags files for a tag, and return tag queue. */ static TAGQ * ctag_slist(sp, tag) SCR *sp; char *tag; { EX_PRIVATE *exp; TAGF *tfp; TAGQ *tqp; size_t len; int echk; exp = EXP(sp); /* Allocate and initialize the tag queue structure. */ len = strlen(tag); CALLOC_GOTO(sp, tqp, TAGQ *, 1, sizeof(TAGQ) + len + 1); CIRCLEQ_INIT(&tqp->tagq); tqp->tag = tqp->buf; memcpy(tqp->tag, tag, (tqp->tlen = len) + 1); /* * Find the tag, only display missing file messages once, and * then only if we didn't find the tag. */ for (echk = 0, tfp = exp->tagfq.tqh_first; tfp != NULL; tfp = tfp->q.tqe_next) if (ctag_sfile(sp, tfp, tqp, tag)) { echk = 1; F_SET(tfp, TAGF_ERR); } else F_CLR(tfp, TAGF_ERR | TAGF_ERR_WARN); /* Check to see if we found anything. */ if (tqp->tagq.cqh_first == (void *)&tqp->tagq) { msgq_str(sp, M_ERR, tag, "162|%s: tag not found"); if (echk) for (tfp = exp->tagfq.tqh_first; tfp != NULL; tfp = tfp->q.tqe_next) if (F_ISSET(tfp, TAGF_ERR) && !F_ISSET(tfp, TAGF_ERR_WARN)) { errno = tfp->errnum; msgq_str(sp, M_SYSERR, tfp->name, "%s"); F_SET(tfp, TAGF_ERR_WARN); } free(tqp); return (NULL); } tqp->current = tqp->tagq.cqh_first; return (tqp); alloc_err: return (NULL); } /* * ctag_sfile -- * Search a tags file for a tag, adding any found to the tag queue. */ static int ctag_sfile(sp, tfp, tqp, tname) SCR *sp; TAGF *tfp; TAGQ *tqp; char *tname; { struct stat sb; TAG *tp; size_t dlen, nlen, slen; int fd, i, nf1, nf2; char *back, *cname, *dname, *front, *map, *name, *p, *search, *t; if ((fd = open(tfp->name, O_RDONLY, 0)) < 0) { tfp->errnum = errno; return (1); } /* * XXX * Some old BSD systems require MAP_FILE as an argument when mapping * regular files. */ #ifndef MAP_FILE #define MAP_FILE 0 #endif /* * XXX * We'd like to test if the file is too big to mmap. Since we don't * know what size or type off_t's or size_t's are, what the largest * unsigned integral type is, or what random insanity the local C * compiler will perpetrate, doing the comparison in a portable way * is flatly impossible. Hope mmap fails if the file is too large. */ if (fstat(fd, &sb) != 0 || (map = mmap(NULL, (size_t)sb.st_size, PROT_READ | PROT_WRITE, MAP_FILE | MAP_PRIVATE, fd, (off_t)0)) == (caddr_t)-1) { tfp->errnum = errno; (void)close(fd); return (1); } front = map; back = front + sb.st_size; front = binary_search(tname, front, back); front = linear_search(tname, front, back); if (front == NULL) goto done; /* * Initialize and link in the tag structure(s). The historic ctags * file format only permitted a single tag location per tag. The * obvious extension to permit multiple tags locations per tag is to * output multiple records in the standard format. Unfortunately, * this won't work correctly with historic ex/vi implementations, * because their binary search assumes that there's only one record * per tag, and so will use a random tag entry if there si more than * one. This code handles either format. * * The tags file is in the following format: * * | * * Figure out how long everything is so we can allocate in one swell * foop, but discard anything that looks wrong. */ for (;;) { /* Nul-terminate the end of the line. */ for (p = front; p < back && *p != '\n'; ++p); if (p == back || *p != '\n') break; *p = '\0'; /* Update the pointers for the next time. */ t = p + 1; p = front; front = t; /* Break the line into tokens. */ for (i = 0; i < 2 && (t = strsep(&p, "\t ")) != NULL; ++i) switch (i) { case 0: /* Tag. */ cname = t; break; case 1: /* Filename. */ name = t; nlen = strlen(name); break; } /* Check for corruption. */ if (i != 2 || p == NULL || t == NULL) goto corrupt; /* The rest of the string is the search pattern. */ search = p; if ((slen = strlen(p)) == 0) { corrupt: p = msg_print(sp, tname, &nf1); t = msg_print(sp, tfp->name, &nf2); msgq(sp, M_ERR, "163|%s: corrupted tag in %s", p, t); if (nf1) FREE_SPACE(sp, p, 0); if (nf2) FREE_SPACE(sp, t, 0); continue; } /* Check for passing the last entry. */ if (strcmp(tname, cname)) break; /* Resolve the file name. */ ctag_file(sp, tfp, name, &dname, &dlen); CALLOC_GOTO(sp, tp, TAG *, 1, sizeof(TAG) + dlen + 2 + nlen + 1 + slen + 1); tp->fname = tp->buf; if (dlen != 0) { memcpy(tp->fname, dname, dlen); tp->fname[dlen] = '/'; ++dlen; } memcpy(tp->fname + dlen, name, nlen + 1); tp->fnlen = dlen + nlen; tp->search = tp->fname + tp->fnlen + 1; memcpy(tp->search, search, (tp->slen = slen) + 1); CIRCLEQ_INSERT_TAIL(&tqp->tagq, tp, q); } alloc_err: done: if (munmap(map, (size_t)sb.st_size)) msgq(sp, M_SYSERR, "munmap"); if (close(fd)) msgq(sp, M_SYSERR, "close"); return (0); } /* * ctag_file -- * Search for the right path to this file. */ static void ctag_file(sp, tfp, name, dirp, dlenp) SCR *sp; TAGF *tfp; char *name, **dirp; size_t *dlenp; { struct stat sb; size_t len; char *p, buf[MAXPATHLEN]; /* * !!! * If the tag file path is a relative path, see if it exists. If it * doesn't, look relative to the tags file path. It's okay for a tag * file to not exist, and historically, vi simply displayed a "new" * file. However, if the path exists relative to the tag file, it's * pretty clear what's happening, so we may as well get it right. */ *dlenp = 0; if (name[0] != '/' && stat(name, &sb) && (p = strrchr(tfp->name, '/')) != NULL) { *p = '\0'; len = snprintf(buf, sizeof(buf), "%s/%s", tfp->name, name); *p = '/'; if (stat(buf, &sb) == 0) { *dirp = tfp->name; *dlenp = strlen(*dirp); } } } /* * Binary search for "string" in memory between "front" and "back". * * This routine is expected to return a pointer to the start of a line at * *or before* the first word matching "string". Relaxing the constraint * this way simplifies the algorithm. * * Invariants: * front points to the beginning of a line at or before the first * matching string. * * back points to the beginning of a line at or after the first * matching line. * * Base of the Invariants. * front = NULL; * back = EOF; * * Advancing the Invariants: * * p = first newline after halfway point from front to back. * * If the string at "p" is not greater than the string to match, * p is the new front. Otherwise it is the new back. * * Termination: * * The definition of the routine allows it return at any point, * since front is always at or before the line to print. * * In fact, it returns when the chosen "p" equals "back". This * implies that there exists a string is least half as long as * (back - front), which in turn implies that a linear search will * be no more expensive than the cost of simply printing a string or two. * * Trying to continue with binary search at this point would be * more trouble than it's worth. */ #define EQUAL 0 #define GREATER 1 #define LESS (-1) #define SKIP_PAST_NEWLINE(p, back) while (p < back && *p++ != '\n'); static char * binary_search(string, front, back) register char *string, *front, *back; { register char *p; p = front + (back - front) / 2; SKIP_PAST_NEWLINE(p, back); while (p != back) { if (compare(string, p, back) == GREATER) front = p; else back = p; p = front + (back - front) / 2; SKIP_PAST_NEWLINE(p, back); } return (front); } /* * Find the first line that starts with string, linearly searching from front * to back. * * Return NULL for no such line. * * This routine assumes: * * o front points at the first character in a line. * o front is before or at the first line to be printed. */ static char * linear_search(string, front, back) char *string, *front, *back; { while (front < back) { switch (compare(string, front, back)) { case EQUAL: /* Found it. */ return (front); case LESS: /* No such string. */ return (NULL); case GREATER: /* Keep going. */ break; } SKIP_PAST_NEWLINE(front, back); } return (NULL); } /* * Return LESS, GREATER, or EQUAL depending on how the string1 compares * with string2 (s1 ??? s2). * * o Matches up to len(s1) are EQUAL. * o Matches up to len(s2) are GREATER. * * The string "s1" is null terminated. The string s2 is '\t', space, (or * "back") terminated. * * !!! * Reasonably modern ctags programs use tabs as separators, not spaces. * However, historic programs did use spaces, and, I got complaints. */ static int compare(s1, s2, back) register char *s1, *s2, *back; { for (; *s1 && s2 < back && (*s2 != '\t' && *s2 != ' '); ++s1, ++s2) if (*s1 != *s2) return (*s1 < *s2 ? LESS : GREATER); return (*s1 ? GREATER : s2 < back && (*s2 != '\t' && *s2 != ' ') ? LESS : EQUAL); } vigor-0.016.orig/ex/ex_version.c0100644000076400007640000000137407103707266015244 0ustar cjw44cjw44/*- * Copyright (c) 1991, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1991, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_version.c 10.31 (Berkeley) 8/22/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" #include "version.h" /* * ex_version -- :version * Display the program version. * * PUBLIC: int ex_version __P((SCR *, EXCMD *)); */ int ex_version(sp, cmdp) SCR *sp; EXCMD *cmdp; { msgq(sp, M_INFO, VI_VERSION); return (0); } vigor-0.016.orig/ex/tags0120777000076400007640000000000007107504605015761 2../build/tagsustar cjw44cjw44vigor-0.016.orig/ex/ex_util.c0100644000076400007640000001075507103707266014537 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_util.c 10.23 (Berkeley) 6/19/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" /* * ex_cinit -- * Create an EX command structure. * * PUBLIC: void ex_cinit __P((EXCMD *, * PUBLIC: int, int, recno_t, recno_t, int, ARGS **)); */ void ex_cinit(cmdp, cmd_id, naddr, lno1, lno2, force, ap) EXCMD *cmdp; int cmd_id, force, naddr; recno_t lno1, lno2; ARGS **ap; { memset(cmdp, 0, sizeof(EXCMD)); cmdp->cmd = &cmds[cmd_id]; cmdp->addrcnt = naddr; cmdp->addr1.lno = lno1; cmdp->addr2.lno = lno2; cmdp->addr1.cno = cmdp->addr2.cno = 1; if (force) cmdp->iflags |= E_C_FORCE; cmdp->argc = 0; if ((cmdp->argv = ap) != NULL) cmdp->argv[0] = NULL; } /* * ex_cadd -- * Add an argument to an EX command structure. * * PUBLIC: void ex_cadd __P((EXCMD *, ARGS *, char *, size_t)); */ void ex_cadd(cmdp, ap, arg, len) EXCMD *cmdp; ARGS *ap; char *arg; size_t len; { cmdp->argv[cmdp->argc] = ap; ap->bp = arg; ap->len = len; cmdp->argv[++cmdp->argc] = NULL; } /* * ex_getline -- * Return a line from the file. * * PUBLIC: int ex_getline __P((SCR *, FILE *, size_t *)); */ int ex_getline(sp, fp, lenp) SCR *sp; FILE *fp; size_t *lenp; { EX_PRIVATE *exp; size_t off; int ch; char *p; exp = EXP(sp); for (errno = 0, off = 0, p = exp->ibp;;) { if (off >= exp->ibp_len) { BINC_RET(sp, exp->ibp, exp->ibp_len, off + 1); p = exp->ibp + off; } if ((ch = getc(fp)) == EOF && !feof(fp)) { if (errno == EINTR) { errno = 0; clearerr(fp); continue; } return (1); } if (ch == EOF || ch == '\n') { if (ch == EOF && !off) return (1); *lenp = off; return (0); } *p++ = ch; ++off; } /* NOTREACHED */ } /* * ex_ncheck -- * Check for more files to edit. * * PUBLIC: int ex_ncheck __P((SCR *, int)); */ int ex_ncheck(sp, force) SCR *sp; int force; { char **ap; /* * !!! * Historic practice: quit! or two quit's done in succession * (where ZZ counts as a quit) didn't check for other files. */ if (!force && sp->ccnt != sp->q_ccnt + 1 && sp->cargv != NULL && sp->cargv[1] != NULL) { sp->q_ccnt = sp->ccnt; for (ap = sp->cargv + 1; *ap != NULL; ++ap); msgq(sp, M_ERR, "167|%d more files to edit", (ap - sp->cargv) - 1); return (1); } return (0); } /* * ex_init -- * Init the screen for ex. * * PUBLIC: int ex_init __P((SCR *)); */ int ex_init(sp) SCR *sp; { GS *gp; gp = sp->gp; if (gp->scr_screen(sp, SC_EX)) return (1); (void)gp->scr_attr(sp, SA_ALTERNATE, 0); sp->rows = O_VAL(sp, O_LINES); sp->cols = O_VAL(sp, O_COLUMNS); F_CLR(sp, SC_VI); F_SET(sp, SC_EX | SC_SCR_EX); return (0); } /* * ex_emsg -- * Display a few common ex and vi error messages. * * PUBLIC: void ex_emsg __P((SCR *, char *, exm_t)); */ void ex_emsg(sp, p, which) SCR *sp; char *p; exm_t which; { switch (which) { case EXM_EMPTYBUF: msgq(sp, M_ERR, "168|Buffer %s is empty", p); break; case EXM_FILECOUNT: msgq_str(sp, M_ERR, p, "144|%s: expanded into too many file names"); break; case EXM_NOCANON: msgq(sp, M_ERR, "283|The %s command requires the ex terminal interface", p); break; case EXM_NOCANON_F: msgq(sp, M_ERR, "272|That form of %s requires the ex terminal interface", p); break; case EXM_NOFILEYET: if (p == NULL) msgq(sp, M_ERR, "274|Command failed, no file read in yet."); else msgq(sp, M_ERR, "173|The %s command requires that a file have already been read in", p); break; case EXM_NOPREVBUF: msgq(sp, M_ERR, "171|No previous buffer to execute"); break; case EXM_NOPREVRE: msgq(sp, M_ERR, "172|No previous regular expression"); break; case EXM_NOSUSPEND: msgq(sp, M_ERR, "230|This screen may not be suspended"); break; case EXM_SECURE: msgq(sp, M_ERR, "290|The %s command is not supported when the secure edit option is set", p); break; case EXM_SECURE_F: msgq(sp, M_ERR, "284|That form of %s is not supported when the secure edit option is set", p); break; case EXM_USAGE: msgq(sp, M_ERR, "174|Usage: %s", p); break; } } vigor-0.016.orig/ex/ex_yank.c0100644000076400007640000000172707103707266014523 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_yank.c 10.7 (Berkeley) 3/6/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" /* * ex_yank -- :[line [,line]] ya[nk] [buffer] [count] * Yank the lines into a buffer. * * PUBLIC: int ex_yank __P((SCR *, EXCMD *)); */ int ex_yank(sp, cmdp) SCR *sp; EXCMD *cmdp; { NEEDFILE(sp, cmdp); /* * !!! * Historically, yanking lines in ex didn't count toward the * number-of-lines-yanked report. */ return (cut(sp, FL_ISSET(cmdp->iflags, E_C_BUFFER) ? &cmdp->buffer : NULL, &cmdp->addr1, &cmdp->addr2, CUT_LINEMODE)); } vigor-0.016.orig/ex/script.h0100644000076400007640000000121707103707266014370 0ustar cjw44cjw44/*- * Copyright (c) 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)script.h 10.2 (Berkeley) 3/6/96 */ struct _script { pid_t sh_pid; /* Shell pid. */ int sh_master; /* Master pty fd. */ int sh_slave; /* Slave pty fd. */ char *sh_prompt; /* Prompt. */ size_t sh_prompt_len; /* Prompt length. */ char sh_name[64]; /* Pty name */ #ifdef TIOCGWINSZ struct winsize sh_win; /* Window size. */ #endif struct termios sh_term; /* Terminal information. */ }; vigor-0.016.orig/ex/version.h0100644000076400007640000000013607103707266014550 0ustar cjw44cjw44#define VI_VERSION \ "Version 1.79 (10/23/96) The CSRG, University of California, Berkeley." vigor-0.016.orig/ex/tag.h0100644000076400007640000000605107103707266013640 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * Copyright (c) 1994, 1996 * Rob Mayoff. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)tag.h 10.5 (Berkeley) 5/15/96 */ /* * Cscope connection information. One of these is maintained per cscope * connection, linked from the EX_PRIVATE structure. */ struct _csc { LIST_ENTRY(_csc) q; /* Linked list of cscope connections. */ char *dname; /* Base directory of this cscope connection. */ size_t dlen; /* Length of base directory. */ pid_t pid; /* PID of the connected cscope process. */ time_t mtime; /* Last modification time of cscope database. */ FILE *from_fp; /* from cscope: FILE. */ int from_fd; /* from cscope: file descriptor. */ FILE *to_fp; /* to cscope: FILE. */ int to_fd; /* to cscope: file descriptor. */ char **paths; /* Array of search paths for this cscope. */ char *pbuf; /* Search path buffer. */ size_t pblen; /* Search path buffer length. */ char buf[1]; /* Variable length buffer. */ }; /* * Tag file information. One of these is maintained per tag file, linked * from the EXPRIVATE structure. */ struct _tagf { /* Tag files. */ TAILQ_ENTRY(_tagf) q; /* Linked list of tag files. */ char *name; /* Tag file name. */ int errnum; /* Errno. */ #define TAGF_ERR 0x01 /* Error occurred. */ #define TAGF_ERR_WARN 0x02 /* Error reported. */ u_int8_t flags; }; /* * Tags are structured internally as follows: * * +----+ +----+ +----+ +----+ * | EP | -> | Q1 | <-- | T1 | <-- | T2 | * +----+ +----+ --> +----+ --> +----+ * | * +----+ +----+ * | Q2 | <-- | T1 | * +----+ --> +----+ * | * +----+ +----+ * | Q3 | <-- | T1 | * +----+ --> +----+ * * Each Q is a TAGQ, or tag "query", which is the result of one tag or cscope * command. Each Q references one or more TAG's, or tagged file locations. * * tag: put a new Q at the head (^]) * tagnext: T1 -> T2 inside Q (^N) * tagprev: T2 -> T1 inside Q (^P) * tagpop: discard Q (^T) * tagtop: discard all Q */ struct _tag { /* Tag list. */ CIRCLEQ_ENTRY(_tag) q; /* Linked list of tags. */ /* Tag pop/return information. */ FREF *frp; /* Saved file. */ recno_t lno; /* Saved line number. */ size_t cno; /* Saved column number. */ char *fname; /* Filename. */ size_t fnlen; /* Filename length. */ recno_t slno; /* Search line number. */ char *search; /* Search string. */ size_t slen; /* Search string length. */ char buf[1]; /* Variable length buffer. */ }; struct _tagq { /* Tag queue. */ CIRCLEQ_ENTRY(_tagq) q; /* Linked list of tag queues. */ /* This queue's tag list. */ CIRCLEQ_HEAD(_tagqh, _tag) tagq; TAG *current; /* Current TAG within the queue. */ char *tag; /* Tag string. */ size_t tlen; /* Tag string length. */ #define TAG_CSCOPE 0x01 /* Cscope tag. */ u_int8_t flags; char buf[1]; /* Variable length buffer. */ }; vigor-0.016.orig/ex/ex_visual.c0100644000076400007640000000727507103707267015071 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_visual.c 10.13 (Berkeley) 6/28/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" /* * ex_visual -- :[line] vi[sual] [^-.+] [window_size] [flags] * Switch to visual mode. * * PUBLIC: int ex_visual __P((SCR *, EXCMD *)); */ int ex_visual(sp, cmdp) SCR *sp; EXCMD *cmdp; { SCR *tsp; size_t len; int pos; char buf[256]; /* If open option off, disallow visual command. */ if (!O_ISSET(sp, O_OPEN)) { msgq(sp, M_ERR, "175|The visual command requires that the open option be set"); return (1); } /* Move to the address. */ sp->lno = cmdp->addr1.lno == 0 ? 1 : cmdp->addr1.lno; /* * Push a command based on the line position flags. If no * flag specified, the line goes at the top of the screen. */ switch (FL_ISSET(cmdp->iflags, E_C_CARAT | E_C_DASH | E_C_DOT | E_C_PLUS)) { case E_C_CARAT: pos = '^'; break; case E_C_DASH: pos = '-'; break; case E_C_DOT: pos = '.'; break; case E_C_PLUS: pos = '+'; break; default: sp->frp->lno = sp->lno; sp->frp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); F_SET(sp->frp, FR_CURSORSET); goto nopush; } if (FL_ISSET(cmdp->iflags, E_C_COUNT)) len = snprintf(buf, sizeof(buf), "%luz%c%lu", sp->lno, pos, cmdp->count); else len = snprintf(buf, sizeof(buf), "%luz%c", sp->lno, pos); (void)v_event_push(sp, NULL, buf, len, CH_NOMAP | CH_QUOTED); /* * !!! * Historically, if no line address was specified, the [p#l] flags * caused the cursor to be moved to the last line of the file, which * was then positioned as described above. This seems useless, so * I haven't implemented it. */ switch (FL_ISSET(cmdp->iflags, E_C_HASH | E_C_LIST | E_C_PRINT)) { case E_C_HASH: O_SET(sp, O_NUMBER); break; case E_C_LIST: O_SET(sp, O_LIST); break; case E_C_PRINT: break; } nopush: /* * !!! * You can call the visual part of the editor from within an ex * global command. * * XXX * Historically, undoing a visual session was a single undo command, * i.e. you could undo all of the changes you made in visual mode. * We don't get this right; I'm waiting for the new logging code to * be available. * * It's explicit, don't have to wait for the user, unless there's * already a reason to wait. */ if (!F_ISSET(sp, SC_SCR_EXWROTE)) F_SET(sp, SC_EX_WAIT_NO); if (F_ISSET(sp, SC_EX_GLOBAL)) { /* * When the vi screen(s) exit, we don't want to lose our hold * on this screen or this file, otherwise we're going to fail * fairly spectacularly. */ ++sp->refcnt; ++sp->ep->refcnt; /* * Fake up a screen pointer -- vi doesn't get to change our * underlying file, regardless. */ tsp = sp; if (vi(&tsp)) return (1); /* * !!! * Historically, if the user exited the vi screen(s) using an * ex quit command (e.g. :wq, :q) ex/vi exited, it was only if * they exited vi using the Q command that ex continued. Some * early versions of nvi continued in ex regardless, but users * didn't like the semantic. * * Reset the screen. */ if (ex_init(sp)) return (1); /* Move out of the vi screen. */ (void)ex_puts(sp, "\n"); } else { F_CLR(sp, SC_EX | SC_SCR_EX); F_SET(sp, SC_VI); } return (0); } vigor-0.016.orig/ex/ex_write.c0100644000076400007640000001765707103707267014725 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex_write.c 10.30 (Berkeley) 7/12/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" enum which {WN, WQ, WRITE, XIT}; static int exwr __P((SCR *, EXCMD *, enum which)); /* * ex_wn -- :wn[!] [>>] [file] * Write to a file and switch to the next one. * * PUBLIC: int ex_wn __P((SCR *, EXCMD *)); */ int ex_wn(sp, cmdp) SCR *sp; EXCMD *cmdp; { if (exwr(sp, cmdp, WN)) return (1); if (file_m3(sp, 0)) return (1); /* The file name isn't a new file to edit. */ cmdp->argc = 0; return (ex_next(sp, cmdp)); } /* * ex_wq -- :wq[!] [>>] [file] * Write to a file and quit. * * PUBLIC: int ex_wq __P((SCR *, EXCMD *)); */ int ex_wq(sp, cmdp) SCR *sp; EXCMD *cmdp; { int force; if (exwr(sp, cmdp, WQ)) return (1); if (file_m3(sp, 0)) return (1); force = FL_ISSET(cmdp->iflags, E_C_FORCE); if (ex_ncheck(sp, force)) return (1); F_SET(sp, force ? SC_EXIT_FORCE : SC_EXIT); return (0); } /* * ex_write -- :write[!] [>>] [file] * :write [!] [cmd] * Write to a file. * * PUBLIC: int ex_write __P((SCR *, EXCMD *)); */ int ex_write(sp, cmdp) SCR *sp; EXCMD *cmdp; { return (exwr(sp, cmdp, WRITE)); } /* * ex_xit -- :x[it]! [file] * Write out any modifications and quit. * * PUBLIC: int ex_xit __P((SCR *, EXCMD *)); */ int ex_xit(sp, cmdp) SCR *sp; EXCMD *cmdp; { int force; NEEDFILE(sp, cmdp); if (F_ISSET(sp->ep, F_MODIFIED) && exwr(sp, cmdp, XIT)) return (1); if (file_m3(sp, 0)) return (1); force = FL_ISSET(cmdp->iflags, E_C_FORCE); if (ex_ncheck(sp, force)) return (1); F_SET(sp, force ? SC_EXIT_FORCE : SC_EXIT); return (0); } /* * exwr -- * The guts of the ex write commands. */ static int exwr(sp, cmdp, cmd) SCR *sp; EXCMD *cmdp; enum which cmd; { MARK rm; int flags; char *name, *p; NEEDFILE(sp, cmdp); /* All write commands can have an associated '!'. */ LF_INIT(FS_POSSIBLE); if (FL_ISSET(cmdp->iflags, E_C_FORCE)) LF_SET(FS_FORCE); /* Skip any leading whitespace. */ if (cmdp->argc != 0) for (p = cmdp->argv[0]->bp; *p != '\0' && isblank(*p); ++p); /* If "write !" it's a pipe to a utility. */ if (cmdp->argc != 0 && cmd == WRITE && *p == '!') { /* Secure means no shell access. */ if (O_ISSET(sp, O_SECURE)) { ex_emsg(sp, cmdp->cmd->name, EXM_SECURE_F); return (1); } /* Expand the argument. */ for (++p; *p && isblank(*p); ++p); if (*p == '\0') { ex_emsg(sp, cmdp->cmd->usage, EXM_USAGE); return (1); } if (argv_exp1(sp, cmdp, p, strlen(p), 1)) return (1); /* * Historically, vi waited after a write filter even if there * wasn't any output from the command. People complained when * nvi waited only if there was output, wanting the visual cue * that the program hadn't written anything. */ F_SET(sp, SC_EX_WAIT_YES); /* * !!! * Ignore the return cursor position, the cursor doesn't * move. */ if (ex_filter(sp, cmdp, &cmdp->addr1, &cmdp->addr2, &rm, cmdp->argv[1]->bp, FILTER_WRITE)) return (1); /* Ex terminates with a bang, even if the command fails. */ if (!F_ISSET(sp, SC_VI) && !F_ISSET(sp, SC_EX_SILENT)) (void)ex_puts(sp, "!\n"); return (0); } /* Set the FS_ALL flag if we're writing the entire file. */ if (cmdp->addr1.lno <= 1 && !db_exist(sp, cmdp->addr2.lno + 1)) LF_SET(FS_ALL); /* If "write >>" it's an append to a file. */ if (cmdp->argc != 0 && cmd != XIT && p[0] == '>' && p[1] == '>') { LF_SET(FS_APPEND); /* Skip ">>" and whitespace. */ for (p += 2; *p && isblank(*p); ++p); } /* If no other arguments, just write the file back. */ if (cmdp->argc == 0 || *p == '\0') return (file_write(sp, &cmdp->addr1, &cmdp->addr2, NULL, flags)); /* Build an argv so we get an argument count and file expansion. */ if (argv_exp2(sp, cmdp, p, strlen(p))) return (1); /* * 0 args: impossible. * 1 args: impossible (I hope). * 2 args: read it. * >2 args: object, too many args. * * The 1 args case depends on the argv_sexp() function refusing * to return success without at least one non-blank character. */ switch (cmdp->argc) { case 0: case 1: abort(); /* NOTREACHED */ case 2: name = cmdp->argv[1]->bp; /* * !!! * Historically, the read and write commands renamed * "unnamed" files, or, if the file had a name, set * the alternate file name. */ if (F_ISSET(sp->frp, FR_TMPFILE) && !F_ISSET(sp->frp, FR_EXNAMED)) { if ((p = v_strdup(sp, cmdp->argv[1]->bp, cmdp->argv[1]->len)) != NULL) { free(sp->frp->name); sp->frp->name = p; } /* * The file has a real name, it's no longer a * temporary, clear the temporary file flags. * * !!! * If we're writing the whole file, FR_NAMECHANGE * will be cleared by the write routine -- this is * historic practice. */ F_CLR(sp->frp, FR_TMPEXIT | FR_TMPFILE); F_SET(sp->frp, FR_NAMECHANGE | FR_EXNAMED); /* Notify the screen. */ (void)sp->gp->scr_rename(sp, sp->frp->name, 1); } else set_alt_name(sp, name); break; default: ex_emsg(sp, p, EXM_FILECOUNT); return (1); } return (file_write(sp, &cmdp->addr1, &cmdp->addr2, name, flags)); } /* * ex_writefp -- * Write a range of lines to a FILE *. * * PUBLIC: int ex_writefp __P((SCR *, * PUBLIC: char *, FILE *, MARK *, MARK *, u_long *, u_long *, int)); */ int ex_writefp(sp, name, fp, fm, tm, nlno, nch, silent) SCR *sp; char *name; FILE *fp; MARK *fm, *tm; u_long *nlno, *nch; int silent; { struct stat sb; GS *gp; u_long ccnt; /* XXX: can't print off_t portably. */ recno_t fline, tline, lcnt; size_t len; int rval; char *msg, *p; gp = sp->gp; fline = fm->lno; tline = tm->lno; if (nlno != NULL) { *nch = 0; *nlno = 0; } /* * The vi filter code has multiple processes running simultaneously, * and one of them calls ex_writefp(). The "unsafe" function calls * in this code are to db_get() and msgq(). Db_get() is safe, see * the comment in ex_filter.c:ex_filter() for details. We don't call * msgq if the multiple process bit in the EXF is set. * * !!! * Historic vi permitted files of 0 length to be written. However, * since the way vi got around dealing with "empty" files was to * always have a line in the file no matter what, it wrote them as * files of a single, empty line. We write empty files. * * "Alex, I'll take vi trivia for $1000." */ ccnt = 0; lcnt = 0; msg = "253|Writing..."; if (tline != 0) for (; fline <= tline; ++fline, ++lcnt) { /* Caller has to provide any interrupt message. */ if ((lcnt + 1) % INTERRUPT_CHECK == 0) { if (INTERRUPTED(sp)) break; if (!silent) { gp->scr_busy(sp, msg, msg == NULL ? BUSY_UPDATE : BUSY_ON); msg = NULL; } } if (db_get(sp, fline, DBG_FATAL, &p, &len)) goto err; if (fwrite(p, 1, len, fp) != len) goto err; ccnt += len; if (putc('\n', fp) != '\n') break; ++ccnt; } if (fflush(fp)) goto err; /* * XXX * I don't trust NFS -- check to make sure that we're talking to * a regular file and sync so that NFS is forced to flush. */ if (!fstat(fileno(fp), &sb) && S_ISREG(sb.st_mode) && fsync(fileno(fp))) goto err; if (fclose(fp)) goto err; rval = 0; if (0) { err: if (!F_ISSET(sp->ep, F_MULTILOCK)) msgq_str(sp, M_SYSERR, name, "%s"); (void)fclose(fp); rval = 1; } if (!silent) gp->scr_busy(sp, NULL, BUSY_OFF); /* Report the possibly partial transfer. */ if (nlno != NULL) { *nch = ccnt; *nlno = lcnt; } return (rval); } vigor-0.016.orig/ex/ex.c0100644000076400007640000017336407103707267013511 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ex.c 10.57 (Berkeley) 10/10/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #if defined(DEBUG) && defined(COMLOG) static void ex_comlog __P((SCR *, EXCMD *)); #endif static EXCMDLIST const * ex_comm_search __P((char *, size_t)); static int ex_discard __P((SCR *)); static int ex_line __P((SCR *, EXCMD *, MARK *, int *, int *)); static int ex_load __P((SCR *)); static void ex_unknown __P((SCR *, char *, size_t)); /* * ex -- * Main ex loop. * * PUBLIC: int ex __P((SCR **)); */ int ex(spp) SCR **spp; { EX_PRIVATE *exp; GS *gp; MSGS *mp; SCR *sp; TEXT *tp; u_int32_t flags; sp = *spp; gp = sp->gp; exp = EXP(sp); /* Start the ex screen. */ if (ex_init(sp)) return (1); /* Flush any saved messages. */ while ((mp = gp->msgq.lh_first) != NULL) { gp->scr_msg(sp, mp->mtype, mp->buf, mp->len); LIST_REMOVE(mp, q); free(mp->buf); free(mp); } /* If reading from a file, errors should have name and line info. */ if (F_ISSET(gp, G_SCRIPTED)) { gp->excmd.if_lno = 1; gp->excmd.if_name = "script"; } /* * !!! * Initialize the text flags. The beautify edit option historically * applied to ex command input read from a file. In addition, the * first time a ^H was discarded from the input, there was a message, * "^H discarded", that was displayed. We don't bother. */ LF_INIT(TXT_BACKSLASH | TXT_CNTRLD | TXT_CR); for (;; ++gp->excmd.if_lno) { /* Display status line and flush. */ if (F_ISSET(sp, SC_STATUS)) { if (!F_ISSET(sp, SC_EX_SILENT)) msgq_status(sp, sp->lno, 0); F_CLR(sp, SC_STATUS); } (void)ex_fflush(sp); /* Set the flags the user can reset. */ if (O_ISSET(sp, O_BEAUTIFY)) LF_SET(TXT_BEAUTIFY); if (O_ISSET(sp, O_PROMPT)) LF_SET(TXT_PROMPT); /* Clear any current interrupts, and get a command. */ CLR_INTERRUPT(sp); if (ex_txt(sp, &sp->tiq, ':', flags)) return (1); if (INTERRUPTED(sp)) { (void)ex_puts(sp, "\n"); (void)ex_fflush(sp); continue; } /* Initialize the command structure. */ CLEAR_EX_PARSER(&gp->excmd); /* * If the user entered a single carriage return, send * ex_cmd() a separator -- it discards single newlines. */ tp = sp->tiq.cqh_first; if (tp->len == 0) { gp->excmd.cp = " "; /* __TK__ why not |? */ gp->excmd.clen = 1; } else { gp->excmd.cp = tp->lb; gp->excmd.clen = tp->len; } F_INIT(&gp->excmd, E_NRSEP); if (ex_cmd(sp) && F_ISSET(gp, G_SCRIPTED)) return (1); if (INTERRUPTED(sp)) { CLR_INTERRUPT(sp); msgq(sp, M_ERR, "170|Interrupted"); } /* * If the last command caused a restart, or switched screens * or into vi, return. */ if (F_ISSET(gp, G_SRESTART) || F_ISSET(sp, SC_SSWITCH | SC_VI)) { *spp = sp; break; } /* If the last command switched files, we don't care. */ F_CLR(sp, SC_FSWITCH); /* * If we're exiting this screen, move to the next one. By * definition, this means returning into vi, so return to the * main editor loop. The ordering is careful, don't discard * the contents of sp until the end. */ if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE)) { if (file_end(sp, NULL, F_ISSET(sp, SC_EXIT_FORCE))) return (1); *spp = screen_next(sp); return (screen_end(sp)); } } return (0); } /* * ex_cmd -- * The guts of the ex parser: parse and execute a string containing * ex commands. * * !!! * This code MODIFIES the string that gets passed in, to delete quoting * characters, etc. The string cannot be readonly/text space, nor should * you expect to use it again after ex_cmd() returns. * * !!! * For the fun of it, if you want to see if a vi clone got the ex argument * parsing right, try: * * echo 'foo|bar' > file1; echo 'foo/bar' > file2; * vi * :edit +1|s/|/PIPE/|w file1| e file2|1 | s/\//SLASH/|wq * * or: vi * :set|file|append|set|file * * For extra credit, try them in a startup .exrc file. * * PUBLIC: int ex_cmd __P((SCR *)); */ int ex_cmd(sp) SCR *sp; { enum nresult nret; EX_PRIVATE *exp; EXCMD *ecp; GS *gp; MARK cur; recno_t lno; size_t arg1_len, discard, len; u_int32_t flags; long ltmp; int at_found, gv_found; int ch, cnt, delim, isaddr, namelen; int newscreen, notempty, tmp, vi_address; char *arg1, *p, *s, *t; gp = sp->gp; exp = EXP(sp); /* * We always start running the command on the top of the stack. * This means that *everything* must be resolved when we leave * this function for any reason. */ loop: ecp = gp->ecq.lh_first; /* If we're reading a command from a file, set up error information. */ if (ecp->if_name != NULL) { gp->if_lno = ecp->if_lno; gp->if_name = ecp->if_name; } /* * If a move to the end of the file is scheduled for this command, * do it now. */ if (F_ISSET(ecp, E_MOVETOEND)) { if (db_last(sp, &sp->lno)) goto rfail; sp->cno = 0; F_CLR(ecp, E_MOVETOEND); } /* If we found a newline, increment the count now. */ if (F_ISSET(ecp, E_NEWLINE)) { ++gp->if_lno; ++ecp->if_lno; F_CLR(ecp, E_NEWLINE); } /* (Re)initialize the EXCMD structure, preserving some flags. */ CLEAR_EX_CMD(ecp); /* Initialize the argument structures. */ if (argv_init(sp, ecp)) goto err; /* Initialize +cmd, saved command information. */ arg1 = NULL; ecp->save_cmdlen = 0; /* Skip s, empty lines. */ for (notempty = 0; ecp->clen > 0; ++ecp->cp, --ecp->clen) if ((ch = *ecp->cp) == '\n') { ++gp->if_lno; ++ecp->if_lno; } else if (isblank(ch)) notempty = 1; else break; /* * !!! * Permit extra colons at the start of the line. Historically, * ex/vi allowed a single extra one. It's simpler not to count. * The stripping is done here because, historically, any command * could have preceding colons, e.g. ":g/pattern/:p" worked. */ if (ecp->clen != 0 && ch == ':') { notempty = 1; while (--ecp->clen > 0 && (ch = *++ecp->cp) == ':'); } /* * Command lines that start with a double-quote are comments. * * !!! * Historically, there was no escape or delimiter for a comment, e.g. * :"foo|set was a single comment and nothing was output. Since nvi * permits users to escape characters into command lines, we * have to check for that case. */ if (ecp->clen != 0 && ch == '"') { while (--ecp->clen > 0 && *++ecp->cp != '\n'); if (*ecp->cp == '\n') { F_SET(ecp, E_NEWLINE); ++ecp->cp; --ecp->clen; } goto loop; } /* Skip whitespace. */ for (; ecp->clen > 0; ++ecp->cp, --ecp->clen) { ch = *ecp->cp; if (!isblank(ch)) break; } /* * The last point at which an empty line can mean do nothing. * * !!! * Historically, in ex mode, lines containing only characters * were the same as a single , i.e. a default command. * In vi mode, they were ignored. In .exrc files this was a serious * annoyance, as vi kept trying to treat them as print commands. We * ignore backward compatibility in this case, discarding lines that * contain only characters from .exrc files. * * !!! * This is where you end up when you're done a command, i.e. clen has * gone to zero. Continue if there are more commands to run. */ if (ecp->clen == 0 && (!notempty || F_ISSET(sp, SC_VI) || F_ISSET(ecp, E_BLIGNORE))) { if (ex_load(sp)) goto rfail; ecp = gp->ecq.lh_first; if (ecp->clen == 0) goto rsuccess; goto loop; } /* * Check to see if this is a command for which we may want to move * the cursor back up to the previous line. (The command :1 * wants a separator, but the command : wants to erase * the command line.) If the line is empty except for s, * or , we'll probably want to move up. I * don't think there's any way to get characters *after* the * command character, but this is the ex parser, and I've been wrong * before. */ if (F_ISSET(ecp, E_NRSEP) && ecp->clen != 0 && (ecp->clen != 1 || ecp->cp[0] != '\004')) F_CLR(ecp, E_NRSEP); /* Parse command addresses. */ if (ex_range(sp, ecp, &tmp)) goto rfail; if (tmp) goto err; /* * Skip s and any more colons (the command :3,5:print * worked, historically). */ for (; ecp->clen > 0; ++ecp->cp, --ecp->clen) { ch = *ecp->cp; if (!isblank(ch) && ch != ':') break; } /* * If no command, ex does the last specified of p, l, or #, and vi * moves to the line. Otherwise, determine the length of the command * name by looking for the first non-alphabetic character. (There * are a few non-alphabetic characters in command names, but they're * all single character commands.) This isn't a great test, because * it means that, for the command ":e +cut.c file", we'll report that * the command "cut" wasn't known. However, it makes ":e+35 file" work * correctly. * * !!! * Historically, lines with multiple adjacent (or separated) * command separators were very strange. For example, the command * |||, when the cursor was on line 1, displayed * lines 2, 3 and 5 of the file. In addition, the command " | " * would only display the line after the next line, instead of the * next two lines. No ideas why. It worked reasonably when executed * from vi mode, and displayed lines 2, 3, and 4, so we do a default * command for each separator. */ #define SINGLE_CHAR_COMMANDS "\004!#&*<=>@~" newscreen = 0; if (ecp->clen != 0 && ecp->cp[0] != '|' && ecp->cp[0] != '\n') { if (strchr(SINGLE_CHAR_COMMANDS, *ecp->cp)) { p = ecp->cp; ++ecp->cp; --ecp->clen; namelen = 1; } else { for (p = ecp->cp; ecp->clen > 0; --ecp->clen, ++ecp->cp) if (!isalpha(*ecp->cp)) break; if ((namelen = ecp->cp - p) == 0) { msgq(sp, M_ERR, "080|Unknown command name"); goto err; } } /* * !!! * Historic vi permitted flags to immediately follow any * subset of the 'delete' command, but then did not permit * further arguments (flag, buffer, count). Make it work. * Permit further arguments for the few shreds of dignity * it offers. * * Adding commands that start with 'd', and match "delete" * up to a l, p, +, - or # character can break this code. * * !!! * Capital letters beginning the command names ex, edit, * next, previous, tag and visual (in vi mode) indicate the * command should happen in a new screen. */ switch (p[0]) { case 'd': for (s = p, t = cmds[C_DELETE].name; *s == *t; ++s, ++t); if (s[0] == 'l' || s[0] == 'p' || s[0] == '+' || s[0] == '-' || s[0] == '^' || s[0] == '#') { len = (ecp->cp - p) - (s - p); ecp->cp -= len; ecp->clen += len; ecp->rcmd = cmds[C_DELETE]; ecp->rcmd.syntax = "1bca1"; ecp->cmd = &ecp->rcmd; goto skip_srch; } break; case 'E': case 'F': case 'N': case 'P': case 'T': case 'V': newscreen = 1; p[0] = tolower(p[0]); break; } /* * Search the table for the command. * * !!! * Historic vi permitted the mark to immediately follow the * 'k' in the 'k' command. Make it work. * * !!! * Historic vi permitted any flag to follow the s command, e.g. * "s/e/E/|s|sgc3p" was legal. Make the command "sgc" work. * Since the following characters all have to be flags, i.e. * alphabetics, we can let the s command routine return errors * if it was some illegal command string. This code will break * if an "sg" or similar command is ever added. The substitute * code doesn't care if it's a "cgr" flag or a "#lp" flag that * follows the 's', but we limit the choices here to "cgr" so * that we get unknown command messages for wrong combinations. */ if ((ecp->cmd = ex_comm_search(p, namelen)) == NULL) switch (p[0]) { case 'k': if (namelen == 2) { ecp->cp -= namelen - 1; ecp->clen += namelen - 1; ecp->cmd = &cmds[C_K]; break; } goto unknown; case 's': for (s = p + 1, cnt = namelen; --cnt; ++s) if (s[0] != 'c' && s[0] != 'g' && s[0] != 'r') break; if (cnt == 0) { ecp->cp -= namelen - 1; ecp->clen += namelen - 1; ecp->rcmd = cmds[C_SUBSTITUTE]; ecp->rcmd.fn = ex_subagain; ecp->cmd = &ecp->rcmd; break; } /* FALLTHROUGH */ default: unknown: if (newscreen) p[0] = toupper(p[0]); ex_unknown(sp, p, namelen); goto err; } /* * The visual command has a different syntax when called * from ex than when called from a vi colon command. FMH. * Make the change now, before we test for the newscreen * semantic, so that we're testing the right one. */ skip_srch: if (ecp->cmd == &cmds[C_VISUAL_EX] && F_ISSET(sp, SC_VI)) ecp->cmd = &cmds[C_VISUAL_VI]; /* * !!! * Historic vi permitted a capital 'P' at the beginning of * any command that started with 'p'. Probably wanted the * P[rint] command for backward compatibility, and the code * just made Preserve and Put work by accident. Nvi uses * Previous to mean previous-in-a-new-screen, so be careful. */ if (newscreen && !F_ISSET(ecp->cmd, E_NEWSCREEN) && (ecp->cmd == &cmds[C_PRINT] || ecp->cmd == &cmds[C_PRESERVE])) newscreen = 0; /* Test for a newscreen associated with this command. */ if (newscreen && !F_ISSET(ecp->cmd, E_NEWSCREEN)) goto unknown; /* Secure means no shell access. */ if (F_ISSET(ecp->cmd, E_SECURE) && O_ISSET(sp, O_SECURE)) { ex_emsg(sp, ecp->cmd->name, EXM_SECURE); goto err; } /* * Multiple < and > characters; another "feature". Note, * The string passed to the underlying function may not be * nul terminated in this case. */ if ((ecp->cmd == &cmds[C_SHIFTL] && *p == '<') || (ecp->cmd == &cmds[C_SHIFTR] && *p == '>')) { for (ch = *p; ecp->clen > 0; --ecp->clen, ++ecp->cp) if (*ecp->cp != ch) break; if (argv_exp0(sp, ecp, p, ecp->cp - p)) goto err; } /* Set the format style flags for the next command. */ if (ecp->cmd == &cmds[C_HASH]) exp->fdef = E_C_HASH; else if (ecp->cmd == &cmds[C_LIST]) exp->fdef = E_C_LIST; else if (ecp->cmd == &cmds[C_PRINT]) exp->fdef = E_C_PRINT; F_CLR(ecp, E_USELASTCMD); } else { /* Print is the default command. */ ecp->cmd = &cmds[C_PRINT]; /* Set the saved format flags. */ F_SET(ecp, exp->fdef); /* * !!! * If no address was specified, and it's not a global command, * we up the address by one. (I have no idea why globals are * exempted, but it's (ahem) historic practice.) */ if (ecp->addrcnt == 0 && !F_ISSET(sp, SC_EX_GLOBAL)) { ecp->addrcnt = 1; ecp->addr1.lno = sp->lno + 1; ecp->addr1.cno = sp->cno; } F_SET(ecp, E_USELASTCMD); } /* * !!! * Historically, the number option applied to both ex and vi. One * strangeness was that ex didn't switch display formats until a * command was entered, e.g. 's after the set didn't change to * the new format, but :1p would. */ if (O_ISSET(sp, O_NUMBER)) { F_SET(ecp, E_OPTNUM); FL_SET(ecp->iflags, E_C_HASH); } else F_CLR(ecp, E_OPTNUM); /* Check for ex mode legality. */ if (F_ISSET(sp, SC_EX) && (F_ISSET(ecp->cmd, E_VIONLY) || newscreen)) { msgq(sp, M_ERR, "082|%s: command not available in ex mode", ecp->cmd->name); goto err; } /* Add standard command flags. */ F_SET(ecp, ecp->cmd->flags); if (!newscreen) F_CLR(ecp, E_NEWSCREEN); /* * There are three normal termination cases for an ex command. They * are the end of the string (ecp->clen), or unescaped (by characters) or '|' characters. As we're now past * possible addresses, we can determine how long the command is, so we * don't have to look for all the possible terminations. Naturally, * there are some exciting special cases: * * 1: The bang, global, v and the filter versions of the read and * write commands are delimited by s (they can contain * shell pipes). * 2: The ex, edit, next and visual in vi mode commands all take ex * commands as their first arguments. * 3: The s command takes an RE as its first argument, and wants it * to be specially delimited. * * Historically, '|' characters in the first argument of the ex, edit, * next, vi visual, and s commands didn't delimit the command. And, * in the filter cases for read and write, and the bang, global and v * commands, they did not delimit the command at all. * * For example, the following commands were legal: * * :edit +25|s/abc/ABC/ file.c * :s/|/PIPE/ * :read !spell % | columnate * :global/pattern/p|l * * It's not quite as simple as it sounds, however. The command: * * :s/a/b/|s/c/d|set * * was also legal, i.e. the historic ex parser (using the word loosely, * since "parser" implies some regularity of syntax) delimited the RE's * based on its delimiter and not anything so irretrievably vulgar as a * command syntax. * * Anyhow, the following code makes this all work. First, for the * special cases we move past their special argument(s). Then, we * do normal command processing on whatever is left. Barf-O-Rama. */ discard = 0; /* Characters discarded from the command. */ arg1_len = 0; ecp->save_cmd = ecp->cp; if (ecp->cmd == &cmds[C_EDIT] || ecp->cmd == &cmds[C_EX] || ecp->cmd == &cmds[C_NEXT] || ecp->cmd == &cmds[C_VISUAL_VI]) { /* * Move to the next non-whitespace character. A '!' * immediately following the command is eaten as a * force flag. */ if (ecp->clen > 0 && *ecp->cp == '!') { ++ecp->cp; --ecp->clen; FL_SET(ecp->iflags, E_C_FORCE); /* Reset, don't reparse. */ ecp->save_cmd = ecp->cp; } for (; ecp->clen > 0; --ecp->clen, ++ecp->cp) if (!isblank(*ecp->cp)) break; /* * QUOTING NOTE: * * The historic implementation ignored all escape characters * so there was no way to put a space or newline into the +cmd * field. We do a simplistic job of fixing it by moving to the * first whitespace character that isn't escaped. The escaping * characters are stripped as no longer useful. */ if (ecp->clen > 0 && *ecp->cp == '+') { ++ecp->cp; --ecp->clen; for (arg1 = p = ecp->cp; ecp->clen > 0; --ecp->clen, ++ecp->cp) { ch = *ecp->cp; if (IS_ESCAPE(sp, ecp, ch) && ecp->clen > 1) { ++discard; --ecp->clen; ch = *++ecp->cp; } else if (isblank(ch)) break; *p++ = ch; } arg1_len = ecp->cp - arg1; /* Reset, so the first argument isn't reparsed. */ ecp->save_cmd = ecp->cp; } } else if (ecp->cmd == &cmds[C_BANG] || ecp->cmd == &cmds[C_GLOBAL] || ecp->cmd == &cmds[C_V]) { /* * QUOTING NOTE: * * We use backslashes to escape characters, although * this wasn't historic practice for the bang command. It was * for the global and v commands, and it's common usage when * doing text insert during the command. Escaping characters * are stripped as no longer useful. */ for (p = ecp->cp; ecp->clen > 0; --ecp->clen, ++ecp->cp) { ch = *ecp->cp; if (ch == '\\' && ecp->clen > 1 && ecp->cp[1] == '\n') { ++discard; --ecp->clen; ch = *++ecp->cp; ++gp->if_lno; ++ecp->if_lno; } else if (ch == '\n') break; *p++ = ch; } } else if (ecp->cmd == &cmds[C_READ] || ecp->cmd == &cmds[C_WRITE]) { /* * For write commands, if the next character is a , and * the next non-blank character is a '!', it's a filter command * and we want to eat everything up to the . For read * commands, if the next non-blank character is a '!', it's a * filter command and we want to eat everything up to the next * . Otherwise, we're done. */ for (tmp = 0; ecp->clen > 0; --ecp->clen, ++ecp->cp) { ch = *ecp->cp; if (isblank(ch)) tmp = 1; else break; } if (ecp->clen > 0 && ch == '!' && (ecp->cmd == &cmds[C_READ] || tmp)) for (; ecp->clen > 0; --ecp->clen, ++ecp->cp) if (ecp->cp[0] == '\n') break; } else if (ecp->cmd == &cmds[C_SUBSTITUTE]) { /* * Move to the next non-whitespace character, we'll use it as * the delimiter. If the character isn't an alphanumeric or * a '|', it's the delimiter, so parse it. Otherwise, we're * into something like ":s g", so use the special s command. */ for (; ecp->clen > 0; --ecp->clen, ++ecp->cp) if (!isblank(ecp->cp[0])) break; if (isalnum(ecp->cp[0]) || ecp->cp[0] == '|') { ecp->rcmd = cmds[C_SUBSTITUTE]; ecp->rcmd.fn = ex_subagain; ecp->cmd = &ecp->rcmd; } else if (ecp->clen > 0) { /* * QUOTING NOTE: * * Backslashes quote delimiter characters for RE's. * The backslashes are NOT removed since they'll be * used by the RE code. Move to the third delimiter * that's not escaped (or the end of the command). */ delim = *ecp->cp; ++ecp->cp; --ecp->clen; for (cnt = 2; ecp->clen > 0 && cnt != 0; --ecp->clen, ++ecp->cp) if (ecp->cp[0] == '\\' && ecp->clen > 1) { ++ecp->cp; --ecp->clen; } else if (ecp->cp[0] == delim) --cnt; } } /* * Use normal quoting and termination rules to find the end of this * command. * * QUOTING NOTE: * * Historically, vi permitted ^V's to escape 's in the .exrc * file. It was almost certainly a bug, but that's what bug-for-bug * compatibility means, Grasshopper. Also, ^V's escape the command * delimiters. Literal next quote characters in front of the newlines, * '|' characters or literal next characters are stripped as they're * no longer useful. */ vi_address = ecp->clen != 0 && ecp->cp[0] != '\n'; for (p = ecp->cp; ecp->clen > 0; --ecp->clen, ++ecp->cp) { ch = ecp->cp[0]; if (IS_ESCAPE(sp, ecp, ch) && ecp->clen > 1) { tmp = ecp->cp[1]; if (tmp == '\n' || tmp == '|') { if (tmp == '\n') { ++gp->if_lno; ++ecp->if_lno; } ++discard; --ecp->clen; ++ecp->cp; ch = tmp; } } else if (ch == '\n' || ch == '|') { if (ch == '\n') F_SET(ecp, E_NEWLINE); --ecp->clen; break; } *p++ = ch; } /* * Save off the next command information, go back to the * original start of the command. */ p = ecp->cp + 1; ecp->cp = ecp->save_cmd; ecp->save_cmd = p; ecp->save_cmdlen = ecp->clen; ecp->clen = ((ecp->save_cmd - ecp->cp) - 1) - discard; /* * QUOTING NOTE: * * The "set tags" command historically used a backslash, not the * user's literal next character, to escape whitespace. Handle * it here instead of complicating the argv_exp3() code. Note, * this isn't a particularly complex trap, and if backslashes were * legal in set commands, this would have to be much more complicated. */ if (ecp->cmd == &cmds[C_SET]) for (p = ecp->cp, len = ecp->clen; len > 0; --len, ++p) if (*p == '\\') *p = CH_LITERAL; /* * Set the default addresses. It's an error to specify an address for * a command that doesn't take them. If two addresses are specified * for a command that only takes one, lose the first one. Two special * cases here, some commands take 0 or 2 addresses. For most of them * (the E_ADDR2_ALL flag), 0 defaults to the entire file. For one * (the `!' command, the E_ADDR2_NONE flag), 0 defaults to no lines. * * Also, if the file is empty, some commands want to use an address of * 0, i.e. the entire file is 0 to 0, and the default first address is * 0. Otherwise, an entire file is 1 to N and the default line is 1. * Note, we also add the E_ADDR_ZERO flag to the command flags, for the * case where the 0 address is only valid if it's a default address. * * Also, set a flag if we set the default addresses. Some commands * (ex: z) care if the user specified an address or if we just used * the current cursor. */ switch (F_ISSET(ecp, E_ADDR1 | E_ADDR2 | E_ADDR2_ALL | E_ADDR2_NONE)) { case E_ADDR1: /* One address: */ switch (ecp->addrcnt) { case 0: /* Default cursor/empty file. */ ecp->addrcnt = 1; F_SET(ecp, E_ADDR_DEF); if (F_ISSET(ecp, E_ADDR_ZERODEF)) { if (db_last(sp, &lno)) goto err; if (lno == 0) { ecp->addr1.lno = 0; F_SET(ecp, E_ADDR_ZERO); } else ecp->addr1.lno = sp->lno; } else ecp->addr1.lno = sp->lno; ecp->addr1.cno = sp->cno; break; case 1: break; case 2: /* Lose the first address. */ ecp->addrcnt = 1; ecp->addr1 = ecp->addr2; } break; case E_ADDR2_NONE: /* Zero/two addresses: */ if (ecp->addrcnt == 0) /* Default to nothing. */ break; goto two_addr; case E_ADDR2_ALL: /* Zero/two addresses: */ if (ecp->addrcnt == 0) { /* Default entire/empty file. */ F_SET(ecp, E_ADDR_DEF); ecp->addrcnt = 2; if (sp->ep == NULL) ecp->addr2.lno = 0; else if (db_last(sp, &ecp->addr2.lno)) goto err; if (F_ISSET(ecp, E_ADDR_ZERODEF) && ecp->addr2.lno == 0) { ecp->addr1.lno = 0; F_SET(ecp, E_ADDR_ZERO); } else ecp->addr1.lno = 1; ecp->addr1.cno = ecp->addr2.cno = 0; F_SET(ecp, E_ADDR2_ALL); break; } /* FALLTHROUGH */ case E_ADDR2: /* Two addresses: */ two_addr: switch (ecp->addrcnt) { case 0: /* Default cursor/empty file. */ ecp->addrcnt = 2; F_SET(ecp, E_ADDR_DEF); if (sp->lno == 1 && F_ISSET(ecp, E_ADDR_ZERODEF)) { if (db_last(sp, &lno)) goto err; if (lno == 0) { ecp->addr1.lno = ecp->addr2.lno = 0; F_SET(ecp, E_ADDR_ZERO); } else ecp->addr1.lno = ecp->addr2.lno = sp->lno; } else ecp->addr1.lno = ecp->addr2.lno = sp->lno; ecp->addr1.cno = ecp->addr2.cno = sp->cno; break; case 1: /* Default to first address. */ ecp->addrcnt = 2; ecp->addr2 = ecp->addr1; break; case 2: break; } break; default: if (ecp->addrcnt) /* Error. */ goto usage; } /* * !!! * The ^D scroll command historically scrolled the value of the scroll * option or to EOF. It was an error if the cursor was already at EOF. * (Leading addresses were permitted, but were then ignored.) */ if (ecp->cmd == &cmds[C_SCROLL]) { ecp->addrcnt = 2; ecp->addr1.lno = sp->lno + 1; ecp->addr2.lno = sp->lno + O_VAL(sp, O_SCROLL); ecp->addr1.cno = ecp->addr2.cno = sp->cno; if (db_last(sp, &lno)) goto err; if (lno != 0 && lno > sp->lno && ecp->addr2.lno > lno) ecp->addr2.lno = lno; } ecp->flagoff = 0; for (p = ecp->cmd->syntax; *p != '\0'; ++p) { /* * The force flag is sensitive to leading whitespace, i.e. * "next !" is different from "next!". Handle it before * skipping leading s. */ if (*p == '!') { if (ecp->clen > 0 && *ecp->cp == '!') { ++ecp->cp; --ecp->clen; FL_SET(ecp->iflags, E_C_FORCE); } continue; } /* Skip leading s. */ for (; ecp->clen > 0; --ecp->clen, ++ecp->cp) if (!isblank(*ecp->cp)) break; if (ecp->clen == 0) break; switch (*p) { case '1': /* +, -, #, l, p */ /* * !!! * Historically, some flags were ignored depending * on where they occurred in the command line. For * example, in the command, ":3+++p--#", historic vi * acted on the '#' flag, but ignored the '-' flags. * It's unambiguous what the flags mean, so we just * handle them regardless of the stupidity of their * location. */ for (; ecp->clen; --ecp->clen, ++ecp->cp) switch (*ecp->cp) { case '+': ++ecp->flagoff; break; case '-': case '^': --ecp->flagoff; break; case '#': F_CLR(ecp, E_OPTNUM); FL_SET(ecp->iflags, E_C_HASH); exp->fdef |= E_C_HASH; break; case 'l': FL_SET(ecp->iflags, E_C_LIST); exp->fdef |= E_C_LIST; break; case 'p': FL_SET(ecp->iflags, E_C_PRINT); exp->fdef |= E_C_PRINT; break; default: goto end_case1; } end_case1: break; case '2': /* -, ., +, ^ */ case '3': /* -, ., +, ^, = */ for (; ecp->clen; --ecp->clen, ++ecp->cp) switch (*ecp->cp) { case '-': FL_SET(ecp->iflags, E_C_DASH); break; case '.': FL_SET(ecp->iflags, E_C_DOT); break; case '+': FL_SET(ecp->iflags, E_C_PLUS); break; case '^': FL_SET(ecp->iflags, E_C_CARAT); break; case '=': if (*p == '3') { FL_SET(ecp->iflags, E_C_EQUAL); break; } /* FALLTHROUGH */ default: goto end_case23; } end_case23: break; case 'b': /* buffer */ /* * !!! * Historically, "d #" was a delete with a flag, not a * delete into the '#' buffer. If the current command * permits a flag, don't use one as a buffer. However, * the 'l' and 'p' flags were legal buffer names in the * historic ex, and were used as buffers, not flags. */ if ((ecp->cp[0] == '+' || ecp->cp[0] == '-' || ecp->cp[0] == '^' || ecp->cp[0] == '#') && strchr(p, '1') != NULL) break; /* * !!! * Digits can't be buffer names in ex commands, or the * command "d2" would be a delete into buffer '2', and * not a two-line deletion. */ if (!isdigit(ecp->cp[0])) { ecp->buffer = *ecp->cp; ++ecp->cp; --ecp->clen; FL_SET(ecp->iflags, E_C_BUFFER); } break; case 'c': /* count [01+a] */ ++p; /* Validate any signed value. */ if (!isdigit(*ecp->cp) && (*p != '+' || (*ecp->cp != '+' && *ecp->cp != '-'))) break; /* If a signed value, set appropriate flags. */ if (*ecp->cp == '-') FL_SET(ecp->iflags, E_C_COUNT_NEG); else if (*ecp->cp == '+') FL_SET(ecp->iflags, E_C_COUNT_POS); if ((nret = nget_slong(<mp, ecp->cp, &t, 10)) != NUM_OK) { ex_badaddr(sp, NULL, A_NOTSET, nret); goto err; } if (ltmp == 0 && *p != '0') { msgq(sp, M_ERR, "083|Count may not be zero"); goto err; } ecp->clen -= (t - ecp->cp); ecp->cp = t; /* * Counts as address offsets occur in commands taking * two addresses. Historic vi practice was to use * the count as an offset from the *second* address. * * Set a count flag; some underlying commands (see * join) do different things with counts than with * line addresses. */ if (*p == 'a') { ecp->addr1 = ecp->addr2; ecp->addr2.lno = ecp->addr1.lno + ltmp - 1; } else ecp->count = ltmp; FL_SET(ecp->iflags, E_C_COUNT); break; case 'f': /* file */ if (argv_exp2(sp, ecp, ecp->cp, ecp->clen)) goto err; goto arg_cnt_chk; case 'l': /* line */ /* * Get a line specification. * * If the line was a search expression, we may have * changed state during the call, and we're now * searching the file. Push ourselves onto the state * stack. */ if (ex_line(sp, ecp, &cur, &isaddr, &tmp)) goto rfail; if (tmp) goto err; /* Line specifications are always required. */ if (!isaddr) { msgq_str(sp, M_ERR, ecp->cp, "084|%s: bad line specification"); goto err; } /* * The target line should exist for these commands, * but 0 is legal for them as well. */ if (cur.lno != 0 && !db_exist(sp, cur.lno)) { ex_badaddr(sp, NULL, A_EOF, NUM_OK); goto err; } ecp->lineno = cur.lno; break; case 'S': /* string, file exp. */ if (ecp->clen != 0) { if (argv_exp1(sp, ecp, ecp->cp, ecp->clen, ecp->cmd == &cmds[C_BANG])) goto err; goto addr_verify; } /* FALLTHROUGH */ case 's': /* string */ if (argv_exp0(sp, ecp, ecp->cp, ecp->clen)) goto err; goto addr_verify; case 'W': /* word string */ /* * QUOTING NOTE: * * Literal next characters escape the following * character. Quoting characters are stripped here * since they are no longer useful. * * First there was the word. */ for (p = t = ecp->cp; ecp->clen > 0; --ecp->clen, ++ecp->cp) { ch = *ecp->cp; if (IS_ESCAPE(sp, ecp, ch) && ecp->clen > 1) { --ecp->clen; *p++ = *++ecp->cp; } else if (isblank(ch)) { ++ecp->cp; --ecp->clen; break; } else *p++ = ch; } if (argv_exp0(sp, ecp, t, p - t)) goto err; /* Delete intervening whitespace. */ for (; ecp->clen > 0; --ecp->clen, ++ecp->cp) { ch = *ecp->cp; if (!isblank(ch)) break; } if (ecp->clen == 0) goto usage; /* Followed by the string. */ for (p = t = ecp->cp; ecp->clen > 0; --ecp->clen, ++ecp->cp, ++p) { ch = *ecp->cp; if (IS_ESCAPE(sp, ecp, ch) && ecp->clen > 1) { --ecp->clen; *p = *++ecp->cp; } else *p = ch; } if (argv_exp0(sp, ecp, t, p - t)) goto err; goto addr_verify; case 'w': /* word */ if (argv_exp3(sp, ecp, ecp->cp, ecp->clen)) goto err; arg_cnt_chk: if (*++p != 'N') { /* N */ /* * If a number is specified, must either be * 0 or that number, if optional, and that * number, if required. */ tmp = *p - '0'; if ((*++p != 'o' || exp->argsoff != 0) && exp->argsoff != tmp) goto usage; } goto addr_verify; default: msgq(sp, M_ERR, "085|Internal syntax table error (%s: %s)", ecp->cmd->name, KEY_NAME(sp, *p)); } } /* Skip trailing whitespace. */ for (; ecp->clen > 0; --ecp->clen) { ch = *ecp->cp++; if (!isblank(ch)) break; } /* * There shouldn't be anything left, and no more required fields, * i.e neither 'l' or 'r' in the syntax string. */ if (ecp->clen != 0 || strpbrk(p, "lr")) { usage: msgq(sp, M_ERR, "086|Usage: %s", ecp->cmd->usage); goto err; } /* * Verify that the addresses are legal. Check the addresses here, * because this is a place where all ex addresses pass through. * (They don't all pass through ex_line(), for instance.) We're * assuming that any non-existent line doesn't exist because it's * past the end-of-file. That's a pretty good guess. * * If it's a "default vi command", an address of zero is okay. */ addr_verify: switch (ecp->addrcnt) { case 2: /* * Historic ex/vi permitted commands with counts to go past * EOF. So, for example, if the file only had 5 lines, the * ex command "1,6>" would fail, but the command ">300" * would succeed. Since we don't want to have to make all * of the underlying commands handle random line numbers, * fix it here. */ if (ecp->addr2.lno == 0) { if (!F_ISSET(ecp, E_ADDR_ZERO) && (F_ISSET(sp, SC_EX) || !F_ISSET(ecp, E_USELASTCMD))) { ex_badaddr(sp, ecp->cmd, A_ZERO, NUM_OK); goto err; } } else if (!db_exist(sp, ecp->addr2.lno)) if (FL_ISSET(ecp->iflags, E_C_COUNT)) { if (db_last(sp, &lno)) goto err; ecp->addr2.lno = lno; } else { ex_badaddr(sp, NULL, A_EOF, NUM_OK); goto err; } /* FALLTHROUGH */ case 1: if (ecp->addr1.lno == 0) { if (!F_ISSET(ecp, E_ADDR_ZERO) && (F_ISSET(sp, SC_EX) || !F_ISSET(ecp, E_USELASTCMD))) { ex_badaddr(sp, ecp->cmd, A_ZERO, NUM_OK); goto err; } } else if (!db_exist(sp, ecp->addr1.lno)) { ex_badaddr(sp, NULL, A_EOF, NUM_OK); goto err; } break; } /* * If doing a default command and there's nothing left on the line, * vi just moves to the line. For example, ":3" and ":'a,'b" just * move to line 3 and line 'b, respectively, but ":3|" prints line 3. * * !!! * In addition, IF THE LINE CHANGES, move to the first nonblank of * the line. * * !!! * This is done before the absolute mark gets set; historically, * "/a/,/b/" did NOT set vi's absolute mark, but "/a/,/b/d" did. */ if ((F_ISSET(sp, SC_VI) || F_ISSET(ecp, E_NOPRDEF)) && F_ISSET(ecp, E_USELASTCMD) && vi_address == 0) { switch (ecp->addrcnt) { case 2: if (sp->lno != (ecp->addr2.lno ? ecp->addr2.lno : 1)) { sp->lno = ecp->addr2.lno ? ecp->addr2.lno : 1; sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); } break; case 1: if (sp->lno != (ecp->addr1.lno ? ecp->addr1.lno : 1)) { sp->lno = ecp->addr1.lno ? ecp->addr1.lno : 1; sp->cno = 0; (void)nonblank(sp, sp->lno, &sp->cno); } break; } ecp->cp = ecp->save_cmd; ecp->clen = ecp->save_cmdlen; goto loop; } /* * Set the absolute mark -- we have to set it for vi here, in case * it's a compound command, e.g. ":5p|6" should set the absolute * mark for vi. */ if (F_ISSET(ecp, E_ABSMARK)) { cur.lno = sp->lno; cur.cno = sp->cno; F_CLR(ecp, E_ABSMARK); if (mark_set(sp, ABSMARK1, &cur, 1)) goto err; } #if defined(DEBUG) && defined(COMLOG) ex_comlog(sp, ecp); #endif /* Increment the command count if not called from vi. */ if (F_ISSET(sp, SC_EX)) ++sp->ccnt; /* * If file state available, and not doing a global command, * log the start of an action. */ if (sp->ep != NULL && !F_ISSET(sp, SC_EX_GLOBAL)) (void)log_cursor(sp); /* * !!! * There are two special commands for the purposes of this code: the * default command () or the scrolling commands (^D * and ) as the first non- characters in the line. * * If this is the first command in the command line, we received the * command from the ex command loop and we're talking to a tty, and * and there's nothing else on the command line, and it's one of the * special commands, we move back up to the previous line, and erase * the prompt character with the output. Since ex runs in canonical * mode, we don't have to do anything else, a has already * been echoed by the tty driver. It's OK if vi calls us -- we won't * be in ex mode so we'll do nothing. */ if (F_ISSET(ecp, E_NRSEP)) { if (sp->ep != NULL && F_ISSET(sp, SC_EX) && !F_ISSET(gp, G_SCRIPTED) && (F_ISSET(ecp, E_USELASTCMD) || ecp->cmd == &cmds[C_SCROLL])) gp->scr_ex_adjust(sp, EX_TERM_SCROLL); F_CLR(ecp, E_NRSEP); } /* * Call the underlying function for the ex command. * * XXX * Interrupts behave like errors, for now. */ if (ecp->cmd->fn(sp, ecp) || INTERRUPTED(sp)) { if (F_ISSET(gp, G_SCRIPTED)) F_SET(sp, SC_EXIT_FORCE); goto err; } #ifdef DEBUG /* Make sure no function left global temporary space locked. */ if (F_ISSET(gp, G_TMP_INUSE)) { F_CLR(gp, G_TMP_INUSE); msgq(sp, M_ERR, "087|%s: temporary buffer not released", ecp->cmd->name); } #endif /* * Ex displayed the number of lines modified immediately after each * command, so the command "1,10d|1,10d" would display: * * 10 lines deleted * 10 lines deleted * * * Executing ex commands from vi only reported the final modified * lines message -- that's wrong enough that we don't match it. */ if (F_ISSET(sp, SC_EX)) mod_rpt(sp); /* * Integrate any offset parsed by the underlying command, and make * sure the referenced line exists. * * XXX * May not match historic practice (which I've never been able to * completely figure out.) For example, the '=' command from vi * mode often got the offset wrong, and complained it was too large, * but didn't seem to have a problem with the cursor. If anyone * complains, ask them how it's supposed to work, they might know. */ if (sp->ep != NULL && ecp->flagoff) { if (ecp->flagoff < 0) { if (sp->lno <= -ecp->flagoff) { msgq(sp, M_ERR, "088|Flag offset to before line 1"); goto err; } } else { if (!NPFITS(MAX_REC_NUMBER, sp->lno, ecp->flagoff)) { ex_badaddr(sp, NULL, A_NOTSET, NUM_OVER); goto err; } if (!db_exist(sp, sp->lno + ecp->flagoff)) { msgq(sp, M_ERR, "089|Flag offset past end-of-file"); goto err; } } sp->lno += ecp->flagoff; } /* * If the command executed successfully, we may want to display a line * based on the autoprint option or an explicit print flag. (Make sure * that there's a line to display.) Also, the autoprint edit option is * turned off for the duration of global commands. */ if (F_ISSET(sp, SC_EX) && sp->ep != NULL && sp->lno != 0) { /* * The print commands have already handled the `print' flags. * If so, clear them. */ if (FL_ISSET(ecp->iflags, E_CLRFLAG)) FL_CLR(ecp->iflags, E_C_HASH | E_C_LIST | E_C_PRINT); /* If hash set only because of the number option, discard it. */ if (F_ISSET(ecp, E_OPTNUM)) FL_CLR(ecp->iflags, E_C_HASH); /* * If there was an explicit flag to display the new cursor line, * or autoprint is set and a change was made, display the line. * If any print flags were set use them, else default to print. */ LF_INIT(FL_ISSET(ecp->iflags, E_C_HASH | E_C_LIST | E_C_PRINT)); if (!LF_ISSET(E_C_HASH | E_C_LIST | E_C_PRINT | E_NOAUTO) && !F_ISSET(sp, SC_EX_GLOBAL) && O_ISSET(sp, O_AUTOPRINT) && F_ISSET(ecp, E_AUTOPRINT)) LF_INIT(E_C_PRINT); if (LF_ISSET(E_C_HASH | E_C_LIST | E_C_PRINT)) { cur.lno = sp->lno; cur.cno = 0; (void)ex_print(sp, ecp, &cur, &cur, flags); } } /* * If the command had an associated "+cmd", it has to be executed * before we finish executing any more of this ex command. For * example, consider a .exrc file that contains the following lines: * * :set all * :edit +25 file.c|s/abc/ABC/|1 * :3,5 print * * This can happen more than once -- the historic vi simply hung or * dropped core, of course. Prepend the + command back into the * current command and continue. We may have to add an additional * character. We know that it will fit because we * discarded at least one space and the + character. */ if (arg1_len != 0) { /* * If the last character of the + command was a * character, it would be treated differently because of the * append. Quote it, if necessary. */ if (IS_ESCAPE(sp, ecp, arg1[arg1_len - 1])) { *--ecp->save_cmd = CH_LITERAL; ++ecp->save_cmdlen; } ecp->save_cmd -= arg1_len; ecp->save_cmdlen += arg1_len; memcpy(ecp->save_cmd, arg1, arg1_len); /* * Any commands executed from a +cmd are executed starting at * the first column of the last line of the file -- NOT the * first nonblank.) The main file startup code doesn't know * that a +cmd was set, however, so it may have put us at the * top of the file. (Note, this is safe because we must have * switched files to get here.) */ F_SET(ecp, E_MOVETOEND); } /* Update the current command. */ ecp->cp = ecp->save_cmd; ecp->clen = ecp->save_cmdlen; /* * !!! * If we've changed screens or underlying files, any pending global or * v command, or @ buffer that has associated addresses, has to be * discarded. This is historic practice for globals, and necessary for * @ buffers that had associated addresses. * * Otherwise, if we've changed underlying files, it's not a problem, * we continue with the rest of the ex command(s), operating on the * new file. However, if we switch screens (either by exiting or by * an explicit command), we have no way of knowing where to put output * messages, and, since we don't control screens here, we could screw * up the upper layers, (e.g. we could exit/reenter a screen multiple * times). So, return and continue after we've got a new screen. */ if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE | SC_FSWITCH | SC_SSWITCH)) { at_found = gv_found = 0; for (ecp = sp->gp->ecq.lh_first; ecp != NULL; ecp = ecp->q.le_next) switch (ecp->agv_flags) { case 0: case AGV_AT_NORANGE: break; case AGV_AT: if (!at_found) { at_found = 1; msgq(sp, M_ERR, "090|@ with range running when the file/screen changed"); } break; case AGV_GLOBAL: case AGV_V: if (!gv_found) { gv_found = 1; msgq(sp, M_ERR, "091|Global/v command running when the file/screen changed"); } break; default: abort(); } if (at_found || gv_found) goto discard; if (F_ISSET(sp, SC_EXIT | SC_EXIT_FORCE | SC_SSWITCH)) goto rsuccess; } goto loop; /* NOTREACHED */ err: /* * On command failure, we discard keys and pending commands remaining, * as well as any keys that were mapped and waiting. The save_cmdlen * test is not necessarily correct. If we fail early enough we don't * know if the entire string was a single command or not. Guess, as * it's useful to know if commands other than the current one are being * discarded. */ if (ecp->save_cmdlen == 0) for (; ecp->clen; --ecp->clen) { ch = *ecp->cp++; if (IS_ESCAPE(sp, ecp, ch) && ecp->clen > 1) { --ecp->clen; ++ecp->cp; } else if (ch == '\n' || ch == '|') { if (ecp->clen > 1) ecp->save_cmdlen = 1; break; } } if (ecp->save_cmdlen != 0 || gp->ecq.lh_first != &gp->excmd) { discard: msgq(sp, M_BERR, "092|Ex command failed: pending commands discarded"); ex_discard(sp); } if (v_event_flush(sp, CH_MAPPED)) msgq(sp, M_BERR, "093|Ex command failed: mapped keys discarded"); rfail: tmp = 1; if (0) rsuccess: tmp = 0; /* Turn off any file name error information. */ gp->if_name = NULL; /* Turn off the global bit. */ F_CLR(sp, SC_EX_GLOBAL); return (tmp); } /* * ex_range -- * Get a line range for ex commands, or perform a vi ex address search. * * PUBLIC: int ex_range __P((SCR *, EXCMD *, int *)); */ int ex_range(sp, ecp, errp) SCR *sp; EXCMD *ecp; int *errp; { enum { ADDR_FOUND, ADDR_NEED, ADDR_NONE } addr; GS *gp; EX_PRIVATE *exp; MARK m; int isaddr; *errp = 0; /* * Parse comma or semi-colon delimited line specs. * * Semi-colon delimiters update the current address to be the last * address. For example, the command * * :3;/pattern/ecp->cp * * will search for pattern from line 3. In addition, if ecp->cp * is not a valid command, the current line will be left at 3, not * at the original address. * * Extra addresses are discarded, starting with the first. * * !!! * If any addresses are missing, they default to the current line. * This was historically true for both leading and trailing comma * delimited addresses as well as for trailing semicolon delimited * addresses. For consistency, we make it true for leading semicolon * addresses as well. */ gp = sp->gp; exp = EXP(sp); for (addr = ADDR_NONE, ecp->addrcnt = 0; ecp->clen > 0;) switch (*ecp->cp) { case '%': /* Entire file. */ /* Vi ex address searches didn't permit % signs. */ if (F_ISSET(ecp, E_VISEARCH)) goto ret; /* It's an error if the file is empty. */ if (sp->ep == NULL) { ex_badaddr(sp, NULL, A_EMPTY, NUM_OK); *errp = 1; return (0); } /* * !!! * A percent character addresses all of the lines in * the file. Historically, it couldn't be followed by * any other address. We do it as a text substitution * for simplicity. POSIX 1003.2 is expected to follow * this practice. * * If it's an empty file, the first line is 0, not 1. */ if (addr == ADDR_FOUND) { ex_badaddr(sp, NULL, A_COMBO, NUM_OK); *errp = 1; return (0); } if (db_last(sp, &ecp->addr2.lno)) return (1); ecp->addr1.lno = ecp->addr2.lno == 0 ? 0 : 1; ecp->addr1.cno = ecp->addr2.cno = 0; ecp->addrcnt = 2; addr = ADDR_FOUND; ++ecp->cp; --ecp->clen; break; case ',': /* Comma delimiter. */ /* Vi ex address searches didn't permit commas. */ if (F_ISSET(ecp, E_VISEARCH)) goto ret; /* FALLTHROUGH */ case ';': /* Semi-colon delimiter. */ if (sp->ep == NULL) { ex_badaddr(sp, NULL, A_EMPTY, NUM_OK); *errp = 1; return (0); } if (addr != ADDR_FOUND) switch (ecp->addrcnt) { case 0: ecp->addr1.lno = sp->lno; ecp->addr1.cno = sp->cno; ecp->addrcnt = 1; break; case 2: ecp->addr1 = ecp->addr2; /* FALLTHROUGH */ case 1: ecp->addr2.lno = sp->lno; ecp->addr2.cno = sp->cno; ecp->addrcnt = 2; break; } if (*ecp->cp == ';') switch (ecp->addrcnt) { case 0: abort(); /* NOTREACHED */ case 1: sp->lno = ecp->addr1.lno; sp->cno = ecp->addr1.cno; break; case 2: sp->lno = ecp->addr2.lno; sp->cno = ecp->addr2.cno; break; } addr = ADDR_NEED; /* FALLTHROUGH */ case ' ': /* Whitespace. */ case '\t': /* Whitespace. */ ++ecp->cp; --ecp->clen; break; default: /* Get a line specification. */ if (ex_line(sp, ecp, &m, &isaddr, errp)) return (1); if (*errp) return (0); if (!isaddr) goto ret; if (addr == ADDR_FOUND) { ex_badaddr(sp, NULL, A_COMBO, NUM_OK); *errp = 1; return (0); } switch (ecp->addrcnt) { case 0: ecp->addr1 = m; ecp->addrcnt = 1; break; case 1: ecp->addr2 = m; ecp->addrcnt = 2; break; case 2: ecp->addr1 = ecp->addr2; ecp->addr2 = m; break; } addr = ADDR_FOUND; break; } /* * !!! * Vi ex address searches are indifferent to order or trailing * semi-colons. */ ret: if (F_ISSET(ecp, E_VISEARCH)) return (0); if (addr == ADDR_NEED) switch (ecp->addrcnt) { case 0: ecp->addr1.lno = sp->lno; ecp->addr1.cno = sp->cno; ecp->addrcnt = 1; break; case 2: ecp->addr1 = ecp->addr2; /* FALLTHROUGH */ case 1: ecp->addr2.lno = sp->lno; ecp->addr2.cno = sp->cno; ecp->addrcnt = 2; break; } if (ecp->addrcnt == 2 && ecp->addr2.lno < ecp->addr1.lno) { msgq(sp, M_ERR, "094|The second address is smaller than the first"); *errp = 1; } return (0); } /* * ex_line -- * Get a single line address specifier. * * The way the "previous context" mark worked was that any "non-relative" * motion set it. While ex/vi wasn't totally consistent about this, ANY * numeric address, search pattern, '$', or mark reference in an address * was considered non-relative, and set the value. Which should explain * why we're hacking marks down here. The problem was that the mark was * only set if the command was called, i.e. we have to set a flag and test * it later. * * XXX * This is probably still not exactly historic practice, although I think * it's fairly close. */ static int ex_line(sp, ecp, mp, isaddrp, errp) SCR *sp; EXCMD *ecp; MARK *mp; int *isaddrp, *errp; { enum nresult nret; EX_PRIVATE *exp; GS *gp; long total, val; int isneg; int (*sf) __P((SCR *, MARK *, MARK *, char *, size_t, char **, u_int)); char *endp; gp = sp->gp; exp = EXP(sp); *isaddrp = *errp = 0; F_CLR(ecp, E_DELTA); /* No addresses permitted until a file has been read in. */ if (sp->ep == NULL && strchr("$0123456789'\\/?.+-^", *ecp->cp)) { ex_badaddr(sp, NULL, A_EMPTY, NUM_OK); *errp = 1; return (0); } switch (*ecp->cp) { case '$': /* Last line in the file. */ *isaddrp = 1; F_SET(ecp, E_ABSMARK); mp->cno = 0; if (db_last(sp, &mp->lno)) return (1); ++ecp->cp; --ecp->clen; break; /* Absolute line number. */ case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': *isaddrp = 1; F_SET(ecp, E_ABSMARK); if ((nret = nget_slong(&val, ecp->cp, &endp, 10)) != NUM_OK) { ex_badaddr(sp, NULL, A_NOTSET, nret); *errp = 1; return (0); } if (!NPFITS(MAX_REC_NUMBER, 0, val)) { ex_badaddr(sp, NULL, A_NOTSET, NUM_OVER); *errp = 1; return (0); } mp->lno = val; mp->cno = 0; ecp->clen -= (endp - ecp->cp); ecp->cp = endp; break; case '\'': /* Use a mark. */ *isaddrp = 1; F_SET(ecp, E_ABSMARK); if (ecp->clen == 1) { msgq(sp, M_ERR, "095|No mark name supplied"); *errp = 1; return (0); } if (mark_get(sp, ecp->cp[1], mp, M_ERR)) { *errp = 1; return (0); } ecp->cp += 2; ecp->clen -= 2; break; case '\\': /* Search: forward/backward. */ /* * !!! * I can't find any difference between // and \/ or between * ?? and \?. Mark Horton doesn't remember there being any * difference. C'est la vie. */ if (ecp->clen < 2 || ecp->cp[1] != '/' && ecp->cp[1] != '?') { msgq(sp, M_ERR, "096|\\ not followed by / or ?"); *errp = 1; return (0); } ++ecp->cp; --ecp->clen; sf = ecp->cp[0] == '/' ? f_search : b_search; goto search; case '/': /* Search forward. */ sf = f_search; goto search; case '?': /* Search backward. */ sf = b_search; search: mp->lno = sp->lno; mp->cno = sp->cno; if (sf(sp, mp, mp, ecp->cp, ecp->clen, &endp, SEARCH_MSG | SEARCH_PARSE | SEARCH_SET | (F_ISSET(ecp, E_SEARCH_WMSG) ? SEARCH_WMSG : 0))) { *errp = 1; return (0); } /* Fix up the command pointers. */ ecp->clen -= (endp - ecp->cp); ecp->cp = endp; *isaddrp = 1; F_SET(ecp, E_ABSMARK); break; case '.': /* Current position. */ *isaddrp = 1; mp->cno = sp->cno; /* If an empty file, then '.' is 0, not 1. */ if (sp->lno == 1) { if (db_last(sp, &mp->lno)) return (1); if (mp->lno != 0) mp->lno = 1; } else mp->lno = sp->lno; /* * !!! * Historically, . was the same as .+, i.e. * the '+' could be omitted. (This feature is found in ed * as well.) */ if (ecp->clen > 1 && isdigit(ecp->cp[1])) *ecp->cp = '+'; else { ++ecp->cp; --ecp->clen; } break; } /* Skip trailing s. */ for (; ecp->clen > 0 && isblank(ecp->cp[0]); ++ecp->cp, --ecp->clen); /* * Evaluate any offset. If no address yet found, the offset * is relative to ".". */ total = 0; if (ecp->clen != 0 && (isdigit(ecp->cp[0]) || ecp->cp[0] == '+' || ecp->cp[0] == '-' || ecp->cp[0] == '^')) { if (!*isaddrp) { *isaddrp = 1; mp->lno = sp->lno; mp->cno = sp->cno; } /* * Evaluate an offset, defined as: * * [+-^]*[]*[0-9]* * * The rough translation is any number of signs, optionally * followed by numbers, or a number by itself, all * separated. * * !!! * All address offsets were additive, e.g. "2 2 3p" was the * same as "7p", or, "/ZZZ/ 2" was the same as "/ZZZ/+2". * Note, however, "2 /ZZZ/" was an error. It was also legal * to insert signs without numbers, so "3 - 2" was legal, and * equal to 4. * * !!! * Offsets were historically permitted for any line address, * e.g. the command "1,2 copy 2 2 2 2" copied lines 1,2 after * line 8. * * !!! * Offsets were historically permitted for search commands, * and handled as addresses: "/pattern/2 2 2" was legal, and * referenced the 6th line after pattern. */ F_SET(ecp, E_DELTA); for (;;) { for (; ecp->clen > 0 && isblank(ecp->cp[0]); ++ecp->cp, --ecp->clen); if (ecp->clen == 0 || !isdigit(ecp->cp[0]) && ecp->cp[0] != '+' && ecp->cp[0] != '-' && ecp->cp[0] != '^') break; if (!isdigit(ecp->cp[0]) && !isdigit(ecp->cp[1])) { total += ecp->cp[0] == '+' ? 1 : -1; --ecp->clen; ++ecp->cp; } else { if (ecp->cp[0] == '-' || ecp->cp[0] == '^') { ++ecp->cp; --ecp->clen; isneg = 1; } else isneg = 0; /* Get a signed long, add it to the total. */ if ((nret = nget_slong(&val, ecp->cp, &endp, 10)) != NUM_OK || (nret = NADD_SLONG(sp, total, val)) != NUM_OK) { ex_badaddr(sp, NULL, A_NOTSET, nret); *errp = 1; return (0); } total += isneg ? -val : val; ecp->clen -= (endp - ecp->cp); ecp->cp = endp; } } } /* * Any value less than 0 is an error. Make sure that the new value * will fit into a recno_t. */ if (*isaddrp && total != 0) { if (total < 0) { if (-total > mp->lno) { msgq(sp, M_ERR, "097|Reference to a line number less than 0"); *errp = 1; return (0); } } else if (!NPFITS(MAX_REC_NUMBER, mp->lno, total)) { ex_badaddr(sp, NULL, A_NOTSET, NUM_OVER); *errp = 1; return (0); } mp->lno += total; } return (0); } /* * ex_load -- * Load up the next command, which may be an @ buffer or global command. */ static int ex_load(sp) SCR *sp; { GS *gp; EXCMD *ecp; RANGE *rp; F_CLR(sp, SC_EX_GLOBAL); /* * Lose any exhausted commands. We know that the first command * can't be an AGV command, which makes things a bit easier. */ for (gp = sp->gp;;) { /* * If we're back to the original structure, leave it around, * but discard any allocated source name, we've returned to * the beginning of the command stack. */ if ((ecp = gp->ecq.lh_first) == &gp->excmd) { if (F_ISSET(ecp, E_NAMEDISCARD)) { free(ecp->if_name); ecp->if_name = NULL; } return (0); } /* * ecp->clen will be 0 for the first discarded command, but * may not be 0 for subsequent ones, e.g. if the original * command was ":g/xx/@a|s/b/c/", then when we discard the * command pushed on the stack by the @a, we have to resume * the global command which included the substitute command. */ if (ecp->clen != 0) return (0); /* * If it's an @, global or v command, we may need to continue * the command on a different line. */ if (FL_ISSET(ecp->agv_flags, AGV_ALL)) { /* Discard any exhausted ranges. */ while ((rp = ecp->rq.cqh_first) != (void *)&ecp->rq) if (rp->start > rp->stop) { CIRCLEQ_REMOVE(&ecp->rq, rp, q); free(rp); } else break; /* If there's another range, continue with it. */ if (rp != (void *)&ecp->rq) break; /* If it's a global/v command, fix up the last line. */ if (FL_ISSET(ecp->agv_flags, AGV_GLOBAL | AGV_V) && ecp->range_lno != OOBLNO) if (db_exist(sp, ecp->range_lno)) sp->lno = ecp->range_lno; else { if (db_last(sp, &sp->lno)) return (1); if (sp->lno == 0) sp->lno = 1; } free(ecp->o_cp); } /* Discard the EXCMD. */ LIST_REMOVE(ecp, q); free(ecp); } /* * We only get here if it's an active @, global or v command. Set * the current line number, and get a new copy of the command for * the parser. Note, the original pointer almost certainly moved, * so we have play games. */ ecp->cp = ecp->o_cp; memcpy(ecp->cp, ecp->cp + ecp->o_clen, ecp->o_clen); ecp->clen = ecp->o_clen; ecp->range_lno = sp->lno = rp->start++; if (FL_ISSET(ecp->agv_flags, AGV_GLOBAL | AGV_V)) F_SET(sp, SC_EX_GLOBAL); return (0); } /* * ex_discard -- * Discard any pending ex commands. */ static int ex_discard(sp) SCR *sp; { GS *gp; EXCMD *ecp; RANGE *rp; /* * We know the first command can't be an AGV command, so we don't * process it specially. We do, however, nail the command itself. */ for (gp = sp->gp; (ecp = gp->ecq.lh_first) != &gp->excmd;) { if (FL_ISSET(ecp->agv_flags, AGV_ALL)) { while ((rp = ecp->rq.cqh_first) != (void *)&ecp->rq) { CIRCLEQ_REMOVE(&ecp->rq, rp, q); free(rp); } free(ecp->o_cp); } LIST_REMOVE(ecp, q); free(ecp); } gp->ecq.lh_first->clen = 0; return (0); } /* * ex_unknown -- * Display an unknown command name. */ static void ex_unknown(sp, cmd, len) SCR *sp; char *cmd; size_t len; { size_t blen; char *bp; GET_SPACE_GOTO(sp, bp, blen, len + 1); bp[len] = '\0'; memcpy(bp, cmd, len); msgq_str(sp, M_ERR, bp, "098|The %s command is unknown"); FREE_SPACE(sp, bp, blen); alloc_err: return; } /* * ex_is_abbrev - * The vi text input routine needs to know if ex thinks this is an * [un]abbreviate command, so it can turn off abbreviations. See * the usual ranting in the vi/v_txt_ev.c:txt_abbrev() routine. * * PUBLIC: int ex_is_abbrev __P((char *, size_t)); */ int ex_is_abbrev(name, len) char *name; size_t len; { EXCMDLIST const *cp; return ((cp = ex_comm_search(name, len)) != NULL && (cp == &cmds[C_ABBR] || cp == &cmds[C_UNABBREVIATE])); } /* * ex_is_unmap - * The vi text input routine needs to know if ex thinks this is an * unmap command, so it can turn off input mapping. See the usual * ranting in the vi/v_txt_ev.c:txt_unmap() routine. * * PUBLIC: int ex_is_unmap __P((char *, size_t)); */ int ex_is_unmap(name, len) char *name; size_t len; { EXCMDLIST const *cp; /* * The command the vi input routines are really interested in * is "unmap!", not just unmap. */ if (name[len - 1] != '!') return (0); --len; return ((cp = ex_comm_search(name, len)) != NULL && cp == &cmds[C_UNMAP]); } /* * ex_comm_search -- * Search for a command name. */ static EXCMDLIST const * ex_comm_search(name, len) char *name; size_t len; { EXCMDLIST const *cp; for (cp = cmds; cp->name != NULL; ++cp) { if (cp->name[0] > name[0]) return (NULL); if (cp->name[0] != name[0]) continue; if (!memcmp(name, cp->name, len)) return (cp); } return (NULL); } /* * ex_badaddr -- * Display a bad address message. * * PUBLIC: void ex_badaddr * PUBLIC: __P((SCR *, EXCMDLIST const *, enum badaddr, enum nresult)); */ void ex_badaddr(sp, cp, ba, nret) SCR *sp; EXCMDLIST const *cp; enum badaddr ba; enum nresult nret; { recno_t lno; switch (nret) { case NUM_OK: break; case NUM_ERR: msgq(sp, M_SYSERR, NULL); return; case NUM_OVER: msgq(sp, M_ERR, "099|Address value overflow"); return; case NUM_UNDER: msgq(sp, M_ERR, "100|Address value underflow"); return; } /* * When encountering an address error, tell the user if there's no * underlying file, that's the real problem. */ if (sp->ep == NULL) { ex_emsg(sp, cp->name, EXM_NOFILEYET); return; } switch (ba) { case A_COMBO: msgq(sp, M_ERR, "101|Illegal address combination"); break; case A_EOF: if (db_last(sp, &lno)) return; if (lno != 0) { msgq(sp, M_ERR, "102|Illegal address: only %lu lines in the file", lno); break; } /* FALLTHROUGH */ case A_EMPTY: msgq(sp, M_ERR, "103|Illegal address: the file is empty"); break; case A_NOTSET: abort(); /* NOTREACHED */ case A_ZERO: msgq(sp, M_ERR, "104|The %s command doesn't permit an address of 0", cp->name); break; } return; } #if defined(DEBUG) && defined(COMLOG) /* * ex_comlog -- * Log ex commands. */ static void ex_comlog(sp, ecp) SCR *sp; EXCMD *ecp; { TRACE(sp, "ecmd: %s", ecp->cmd->name); if (ecp->addrcnt > 0) { TRACE(sp, " a1 %d", ecp->addr1.lno); if (ecp->addrcnt > 1) TRACE(sp, " a2: %d", ecp->addr2.lno); } if (ecp->lineno) TRACE(sp, " line %d", ecp->lineno); if (ecp->flags) TRACE(sp, " flags 0x%x", ecp->flags); if (F_ISSET(&exc, E_BUFFER)) TRACE(sp, " buffer %c", ecp->buffer); if (ecp->argc) for (cnt = 0; cnt < ecp->argc; ++cnt) TRACE(sp, " arg %d: {%s}", cnt, ecp->argv[cnt]->bp); TRACE(sp, "\n"); } #endif vigor-0.016.orig/perl_api/0040755000076400007640000000000007103707267014075 5ustar cjw44cjw44vigor-0.016.orig/perl_api/tags0120777000076400007640000000000007107504605017140 2../build/tagsustar cjw44cjw44vigor-0.016.orig/perl_api/VI.pod0100644000076400007640000000727207103707267015124 0ustar cjw44cjw44=head1 NAME VI - VI module within perl embedded nvi =head1 SYNOPSIS sub wc { my $words; $i = $VI::StartLine; while ($i <= $VI::StopLine) { $_ = VI::GetLine($VI::ScreenId, $i++); $words+=split; } VI::Msg($VI::ScreenId,"$words words"); } =head1 DESCRIPTION This pseudo module is available to perl programs run from within nvi and provides access to the files being edited and some internal data. Beware that you should not use this module from within a C or from within an C block or a C method. =head2 Variables These are set by nvi before starting each perl command. =over 8 =item * $ScreenId Screen id of the current screen. =item * $StartLine Line number of the first line of the selected range or of the file if no range was specified. =item * $StopLine Line number of the last line of the selected range or of the file if no range was specified. =back =head2 Functions =over 8 =item * AppendLine VI::AppendLine(screenId,lineNumber,text); Append the string text after the line in lineNumber. =item * DelLine VI::DelLine(screenId,lineNum); Delete lineNum. =item * EndScreen VI::EndScreen(screenId); End a screen. =item * FindScreen VI::FindScreen(file); Return the screen id associated with file name. =item * GetCursor ($line, $column) = VI::GetCursor(screenId); Return the current cursor position as a list with two elements. =item * GetLine VI::GetLine(screenId,lineNumber); Return lineNumber. =item * GetMark ($line, $column) = VI::GetMark(screenId,mark); Return the mark's cursor position as a list with two elements. =item * GetOpt VI::GetOpt(screenId,option); Return the value of an option. =item * InsertLine VI::InsertLine(screenId,lineNumber,text); Insert the string text before the line in lineNumber. =item * LastLine VI::LastLine(screenId); Return the last line in the screen. =item * MapKey VI::MapKey(screenId,key,perlproc); Associate a key with a perl procedure. =item * Msg VI::Msg(screenId,text); Set the message line to text. =item * NewScreen VI::NewScreen(screenId); VI::NewScreen(screenId,file); Create a new screen. If a filename is specified then the screen is opened with that file. =item * Run VI::Run(screenId,cmd); Run the ex command cmd. =item * SetCursor VI::SetCursor(screenId,line,column); Set the cursor to the line and column numbers supplied. =item * SetLine VI::SetLine(screenId,lineNumber,text); Set lineNumber to the text supplied. =item * SetMark VI::SetMark(screenId,mark,line,column); Set the mark to the line and column numbers supplied. =item * SetOpt VI::SetOpt(screenId,command); Set an option. =item * SwitchScreen VI::SwitchScreen(screenId,screenId); Change the current focus to screen. =item * UnmapKey VI::UnmmapKey(screenId,key); Unmap a key. =item * Warn This is the default warning handler. It adds any warnings to the error string. =back =head1 EXAMPLES sub showmarks { my ($mark, $all); for $mark ('a' .. 'z') { eval {VI::GetMark($VI::ScreenId, $mark)}; $all .= $mark unless ($@); } VI::Msg($VI::ScreenId,"Set marks: $all"); } sub forall { my ($code) = shift; my ($i) = $VI::StartLine-1; while (++$i <= $VI::StopLine) { $_ = VI::GetLine($VI::ScreenId, $i); VI::SetLine($VI::ScreenId, $i, $_) if(&$code); } } Now you can do :perl forall sub{s/perlre/substitution/} Although you'll probably use :perldo s/perlre/substitution/ instead. See L for perl regular expressions. =head1 SEE ALSO L =head1 AUTHOR Sven Verdoolaege vigor-0.016.orig/perl_api/perl.xs0100644000076400007640000005072507103707267015421 0ustar cjw44cjw44/*- * Copyright (c) 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * Copyright (c) 1992, 1993, 1994, 1995, 1996 * Keith Bostic. All rights reserved. * Copyright (c) 1995 * George V. Neville-Neil. All rights reserved. * Copyright (c) 1996 * Sven Verdoolaege. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)perl.xs 8.27 (Berkeley) 10/16/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include #include #include #include "perl_extern.h" static void msghandler __P((SCR *, mtype_t, char *, size_t)); extern GS *__global_list; /* XXX */ static char *errmsg = 0; /* * INITMESSAGE -- * Macros to point messages at the Perl message handler. */ #define INITMESSAGE \ scr_msg = __global_list->scr_msg; \ __global_list->scr_msg = msghandler; #define ENDMESSAGE \ __global_list->scr_msg = scr_msg; \ if (rval) croak(errmsg); static void xs_init __P((void)); /* * perl_end -- * Clean up perl interpreter * * PUBLIC: int perl_end __P((GS *)); */ int perl_end(gp) GS *gp; { /* * Call perl_run and perl_destuct to call END blocks and DESTROY * methods. */ if (gp->perl_interp) { /*Irestartop = 0; / * XXX */ perl_run(gp->perl_interp); perl_destruct(gp->perl_interp); #if defined(DEBUG) || defined(PURIFY) || defined(LIBRARY) perl_free(gp->perl_interp); #endif } } /* * perl_eval * Evaluate a string * We don't use mortal SVs because no one will clean up after us */ static void perl_eval(string) char *string; { #ifdef HAVE_PERL_5_003_01 SV* sv = newSVpv(string, 0); perl_eval_sv(sv, G_DISCARD | G_NOARGS); SvREFCNT_dec(sv); #else char *argv[2]; argv[0] = string; argv[1] = NULL; perl_call_argv("_eval_", G_EVAL | G_DISCARD | G_KEEPERR, argv); #endif } /* * perl_init -- * Create the perl commands used by nvi. * * PUBLIC: int perl_init __P((SCR *)); */ int perl_init(scrp) SCR *scrp; { AV * av; GS *gp; char *bootargs[] = { "VI", NULL }; #ifndef USE_SFIO SV *svcurscr; #endif #ifndef HAVE_PERL_5_003_01 static char *args[] = { "", "-e", "sub _eval_ { eval $_[0] }" }; #else static char *args[] = { "", "-e", "" }; #endif STRLEN length; char *file = __FILE__; gp = scrp->gp; gp->perl_interp = perl_alloc(); perl_construct(gp->perl_interp); if (perl_parse(gp->perl_interp, xs_init, 3, args, 0)) { perl_destruct(gp->perl_interp); perl_free(gp->perl_interp); gp->perl_interp = NULL; return 1; } perl_call_argv("VI::bootstrap", G_DISCARD, bootargs); perl_eval("$SIG{__WARN__}='VI::Warn'"); av_unshift(av = GvAVn(incgv), 1); av_store(av, 0, newSVpv(_PATH_PERLSCRIPTS, sizeof(_PATH_PERLSCRIPTS)-1)); #ifdef USE_SFIO sfdisc(PerlIO_stdout(), sfdcnewnvi(scrp)); sfdisc(PerlIO_stderr(), sfdcnewnvi(scrp)); #else svcurscr = perl_get_sv("curscr", TRUE); sv_magic((SV *)gv_fetchpv("STDOUT",TRUE, SVt_PVIO), svcurscr, 'q', Nullch, 0); sv_magic((SV *)gv_fetchpv("STDERR",TRUE, SVt_PVIO), svcurscr, 'q', Nullch, 0); #endif /* USE_SFIO */ return (0); } /* * perl_screen_end * Remove all refences to the screen to be destroyed * * PUBLIC: int perl_screen_end __P((SCR*)); */ int perl_screen_end(scrp) SCR *scrp; { if (scrp->perl_private) { sv_setiv((SV*) scrp->perl_private, 0); } return 0; } static void my_sighandler(i) int i; { croak("Perl command interrupted by SIGINT"); } /* Create a new reference to an SV pointing to the SCR structure * The perl_private part of the SCR structure points to the SV, * so there can only be one such SV for a particular SCR structure. * When the last reference has gone (DESTROY is called), * perl_private is reset; When the screen goes away before * all references are gone, the value of the SV is reset; * any subsequent use of any of those reference will produce * a warning. (see typemap) */ static SV * newVIrv(rv, screen) SV *rv; SCR *screen; { sv_upgrade(rv, SVt_RV); if (!screen->perl_private) { screen->perl_private = newSV(0); sv_setiv(screen->perl_private, (IV) screen); } else SvREFCNT_inc(screen->perl_private); SvRV(rv) = screen->perl_private; SvROK_on(rv); return sv_bless(rv, gv_stashpv("VI", TRUE)); } /* * perl_ex_perl -- :[line [,line]] perl [command] * Run a command through the perl interpreter. * * PUBLIC: int perl_ex_perl __P((SCR*, CHAR_T *, size_t, recno_t, recno_t)); */ int perl_ex_perl(scrp, cmdp, cmdlen, f_lno, t_lno) SCR *scrp; CHAR_T *cmdp; size_t cmdlen; recno_t f_lno, t_lno; { static SV *svcurscr = 0, *svstart, *svstop, *svid; GS *gp; STRLEN length; size_t len; char *err; Signal_t (*istat)(); /* Initialize the interpreter. */ gp = scrp->gp; if (!svcurscr) { if (gp->perl_interp == NULL && perl_init(scrp)) return (1); SvREADONLY_on(svcurscr = perl_get_sv("curscr", TRUE)); SvREADONLY_on(svstart = perl_get_sv("VI::StartLine", TRUE)); SvREADONLY_on(svstop = perl_get_sv("VI::StopLine", TRUE)); SvREADONLY_on(svid = perl_get_sv("VI::ScreenId", TRUE)); } sv_setiv(svstart, f_lno); sv_setiv(svstop, t_lno); newVIrv(svcurscr, scrp); /* Backwards compatibility. */ newVIrv(svid, scrp); istat = signal(SIGINT, my_sighandler); perl_eval(cmdp); signal(SIGINT, istat); SvREFCNT_dec(SvRV(svcurscr)); SvROK_off(svcurscr); SvREFCNT_dec(SvRV(svid)); SvROK_off(svid); err = SvPV(GvSV(errgv), length); if (!length) return (0); err[length - 1] = '\0'; msgq(scrp, M_ERR, "perl: %s", err); return (1); } /* * replace_line * replace a line with the contents of the perl variable $_ * lines are split at '\n's * if $_ is undef, the line is deleted * returns possibly adjusted linenumber */ static int replace_line(scrp, line, t_lno) SCR *scrp; recno_t line, *t_lno; { char *str, *next; size_t len; if (SvOK(GvSV(defgv))) { str = SvPV(GvSV(defgv),len); next = memchr(str, '\n', len); api_sline(scrp, line, str, next ? (next - str) : len); while (next++) { len -= next - str; next = memchr(str = next, '\n', len); api_iline(scrp, ++line, str, next ? (next - str) : len); (*t_lno)++; } } else { api_dline(scrp, line--); (*t_lno)--; } return line; } /* * perl_ex_perldo -- :[line [,line]] perl [command] * Run a set of lines through the perl interpreter. * * PUBLIC: int perl_ex_perldo __P((SCR*, CHAR_T *, size_t, recno_t, recno_t)); */ int perl_ex_perldo(scrp, cmdp, cmdlen, f_lno, t_lno) SCR *scrp; CHAR_T *cmdp; size_t cmdlen; recno_t f_lno, t_lno; { static SV *svcurscr = 0, *svstart, *svstop, *svid; CHAR_T *p; GS *gp; STRLEN length; size_t len; recno_t i; char *str; #ifndef HAVE_PERL_5_003_01 char *argv[2]; #else SV* sv; #endif dSP; /* Initialize the interpreter. */ gp = scrp->gp; if (!svcurscr) { if (gp->perl_interp == NULL && perl_init(scrp)) return (1); SPAGAIN; SvREADONLY_on(svcurscr = perl_get_sv("curscr", TRUE)); SvREADONLY_on(svstart = perl_get_sv("VI::StartLine", TRUE)); SvREADONLY_on(svstop = perl_get_sv("VI::StopLine", TRUE)); SvREADONLY_on(svid = perl_get_sv("VI::ScreenId", TRUE)); } #ifndef HAVE_PERL_5_003_01 argv[0] = cmdp; argv[1] = NULL; #else length = strlen(cmdp); sv = newSV(length + sizeof("sub VI::perldo {")-1 + 1 /* } */); sv_setpvn(sv, "sub VI::perldo {", sizeof("sub VI::perldo {")-1); sv_catpvn(sv, cmdp, length); sv_catpvn(sv, "}", 1); perl_eval_sv(sv, G_DISCARD | G_NOARGS); SvREFCNT_dec(sv); str = SvPV(GvSV(errgv),length); if (length) goto err; #endif newVIrv(svcurscr, scrp); /* Backwards compatibility. */ newVIrv(svid, scrp); ENTER; SAVETMPS; for (i = f_lno; i <= t_lno && !api_gline(scrp, i, &str, &len); i++) { sv_setpvn(GvSV(defgv),str,len); sv_setiv(svstart, i); sv_setiv(svstop, i); #ifndef HAVE_PERL_5_003_01 perl_call_argv("_eval_", G_SCALAR | G_EVAL | G_KEEPERR, argv); #else PUSHMARK(sp); perl_call_pv("VI::perldo", G_SCALAR | G_EVAL); #endif str = SvPV(GvSV(errgv), length); if (length) break; SPAGAIN; if(SvTRUEx(POPs)) i = replace_line(scrp, i, &t_lno); PUTBACK; } FREETMPS; LEAVE; SvREFCNT_dec(SvRV(svcurscr)); SvROK_off(svcurscr); SvREFCNT_dec(SvRV(svid)); SvROK_off(svid); if (!length) return (0); err: str[length - 1] = '\0'; msgq(scrp, M_ERR, "perl: %s", str); return (1); } /* * msghandler -- * Perl message routine so that error messages are processed in * Perl, not in nvi. */ static void msghandler(sp, mtype, msg, len) SCR *sp; mtype_t mtype; char *msg; size_t len; { /* Replace the trailing with an EOS. */ /* Let's do that later instead */ if (errmsg) free (errmsg); errmsg = malloc(len + 1); memcpy(errmsg, msg, len); errmsg[len] = '\0'; } /* Register any extra external extensions */ extern void boot_DynaLoader _((CV* cv)); extern void boot_VI _((CV* cv)); static void xs_init() { #ifdef HAVE_PERL_5_003_01 dXSUB_SYS; #endif char *file = __FILE__; newXS("DynaLoader::boot_DynaLoader", boot_DynaLoader, file); newXS("VI::bootstrap", boot_VI, file); } typedef SCR * VI; typedef SCR * VI__OPT; typedef SCR * VI__MAP; typedef SCR * VI__MARK; typedef AV * AVREF; MODULE = VI PACKAGE = VI # msg -- # Set the message line to text. # # Perl Command: VI::Msg # Usage: VI::Msg screenId text void Msg(screen, text) VI screen char * text ALIAS: PRINT = 1 CODE: api_imessage(screen, text); # XS_VI_escreen -- # End a screen. # # Perl Command: VI::EndScreen # Usage: VI::EndScreen screenId void EndScreen(screen) VI screen PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_escreen(screen); ENDMESSAGE; # XS_VI_iscreen -- # Create a new screen. If a filename is specified then the screen # is opened with that file. # # Perl Command: VI::NewScreen # Usage: VI::NewScreen screenId [file] VI Edit(screen, ...) VI screen ALIAS: NewScreen = 1 PROTOTYPE: $;$ PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char *file; SCR *nsp; CODE: file = (items == 1) ? NULL : (char *)SvPV(ST(1),na); INITMESSAGE; rval = api_edit(screen, file, &nsp, ix); ENDMESSAGE; RETVAL = ix ? nsp : screen; OUTPUT: RETVAL # XS_VI_fscreen -- # Return the screen id associated with file name. # # Perl Command: VI::FindScreen # Usage: VI::FindScreen file VI FindScreen(file) char *file PREINIT: SCR *fsp; CODE: RETVAL = api_fscreen(0, file); # XS_VI_aline -- # -- Append the string text after the line in lineNumber. # # Perl Command: VI::AppendLine # Usage: VI::AppendLine screenId lineNumber text void AppendLine(screen, linenumber, text) VI screen int linenumber char *text PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; STRLEN length; CODE: SvPV(ST(2), length); INITMESSAGE; rval = api_aline(screen, linenumber, text, length); ENDMESSAGE; # XS_VI_dline -- # Delete lineNum. # # Perl Command: VI::DelLine # Usage: VI::DelLine screenId lineNum void DelLine(screen, linenumber) VI screen int linenumber PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_dline(screen, (recno_t)linenumber); ENDMESSAGE; # XS_VI_gline -- # Return lineNumber. # # Perl Command: VI::GetLine # Usage: VI::GetLine screenId lineNumber char * GetLine(screen, linenumber) VI screen int linenumber PREINIT: size_t len; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char *line, *p; PPCODE: INITMESSAGE; rval = api_gline(screen, (recno_t)linenumber, &p, &len); ENDMESSAGE; EXTEND(sp,1); PUSHs(sv_2mortal(newSVpv(p, len))); # XS_VI_sline -- # Set lineNumber to the text supplied. # # Perl Command: VI::SetLine # Usage: VI::SetLine screenId lineNumber text void SetLine(screen, linenumber, text) VI screen int linenumber char *text PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; STRLEN length; CODE: SvPV(ST(2), length); INITMESSAGE; rval = api_sline(screen, linenumber, text, length); ENDMESSAGE; # XS_VI_iline -- # Insert the string text before the line in lineNumber. # # Perl Command: VI::InsertLine # Usage: VI::InsertLine screenId lineNumber text void InsertLine(screen, linenumber, text) VI screen int linenumber char *text PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; STRLEN length; CODE: SvPV(ST(2), length); INITMESSAGE; rval = api_iline(screen, linenumber, text, length); ENDMESSAGE; # XS_VI_lline -- # Return the last line in the screen. # # Perl Command: VI::LastLine # Usage: VI::LastLine screenId int LastLine(screen) VI screen PREINIT: recno_t last; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_lline(screen, &last); ENDMESSAGE; RETVAL=last; OUTPUT: RETVAL # XS_VI_getmark -- # Return the mark's cursor position as a list with two elements. # {line, column}. # # Perl Command: VI::GetMark # Usage: VI::GetMark screenId mark void GetMark(screen, mark) VI screen char mark PREINIT: struct _mark cursor; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; PPCODE: INITMESSAGE; rval = api_getmark(screen, (int)mark, &cursor); ENDMESSAGE; EXTEND(sp,2); PUSHs(sv_2mortal(newSViv(cursor.lno))); PUSHs(sv_2mortal(newSViv(cursor.cno))); # XS_VI_setmark -- # Set the mark to the line and column numbers supplied. # # Perl Command: VI::SetMark # Usage: VI::SetMark screenId mark line column void SetMark(screen, mark, line, column) VI screen char mark int line int column PREINIT: struct _mark cursor; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; cursor.lno = line; cursor.cno = column; rval = api_setmark(screen, (int)mark, &cursor); ENDMESSAGE; # XS_VI_getcursor -- # Return the current cursor position as a list with two elements. # {line, column}. # # Perl Command: VI::GetCursor # Usage: VI::GetCursor screenId void GetCursor(screen) VI screen PREINIT: struct _mark cursor; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; PPCODE: INITMESSAGE; rval = api_getcursor(screen, &cursor); ENDMESSAGE; EXTEND(sp,2); PUSHs(sv_2mortal(newSViv(cursor.lno))); PUSHs(sv_2mortal(newSViv(cursor.cno))); # XS_VI_setcursor -- # Set the cursor to the line and column numbers supplied. # # Perl Command: VI::SetCursor # Usage: VI::SetCursor screenId line column void SetCursor(screen, line, column) VI screen int line int column PREINIT: struct _mark cursor; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; cursor.lno = line; cursor.cno = column; rval = api_setcursor(screen, &cursor); ENDMESSAGE; # XS_VI_swscreen -- # Change the current focus to screen. # # Perl Command: VI::SwitchScreen # Usage: VI::SwitchScreen screenId screenId void SwitchScreen(screenFrom, screenTo) VI screenFrom VI screenTo PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_swscreen(screenFrom, screenTo); ENDMESSAGE; # XS_VI_map -- # Associate a key with a perl procedure. # # Perl Command: VI::MapKey # Usage: VI::MapKey screenId key perlproc void MapKey(screen, key, perlproc) VI screen char *key SV *perlproc PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; int length; char *command; SV *svc; CODE: INITMESSAGE; svc = sv_2mortal(newSVpv(":perl ", 6)); sv_catsv(svc, perlproc); command = SvPV(svc, length); rval = api_map(screen, key, command, length); ENDMESSAGE; # XS_VI_unmap -- # Unmap a key. # # Perl Command: VI::UnmapKey # Usage: VI::UnmmapKey screenId key void UnmapKey(screen, key) VI screen char *key PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_unmap(screen, key); ENDMESSAGE; # XS_VI_opts_set -- # Set an option. # # Perl Command: VI::SetOpt # Usage: VI::SetOpt screenId setting void SetOpt(screen, setting) VI screen char *setting PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; SV *svc; CODE: INITMESSAGE; svc = sv_2mortal(newSVpv(":set ", 5)); sv_catpv(svc, setting); rval = api_run_str(screen, SvPV(svc, na)); ENDMESSAGE; # XS_VI_opts_get -- # Return the value of an option. # # Perl Command: VI::GetOpt # Usage: VI::GetOpt screenId option void GetOpt(screen, option) VI screen char *option PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char *value; PPCODE: INITMESSAGE; rval = api_opts_get(screen, option, &value, NULL); ENDMESSAGE; EXTEND(SP,1); PUSHs(sv_2mortal(newSVpv(value, 0))); free(value); # XS_VI_run -- # Run the ex command cmd. # # Perl Command: VI::Run # Usage: VI::Run screenId cmd void Run(screen, command) VI screen char *command; PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_run_str(screen, command); ENDMESSAGE; void DESTROY(screen) VI screen CODE: screen->perl_private = 0; void Warn(warning) char *warning; PREINIT: int i; CODE: sv_catpv(GvSV(errgv),warning); #define TIED(package) \ sv_magic((SV *) (hv = \ (HV *)sv_2mortal((SV *)newHV())), \ sv_setref_pv(sv_newmortal(), package, \ newVIrv(newSV(0), screen)),\ 'P', Nullch, 0);\ RETVAL = newRV((SV *)hv) SV * Opt(screen) VI screen; PREINIT: HV *hv; CODE: TIED("VI::OPT"); OUTPUT: RETVAL SV * Map(screen) VI screen; PREINIT: HV *hv; CODE: TIED("VI::MAP"); OUTPUT: RETVAL SV * Mark(screen) VI screen PREINIT: HV *hv; CODE: TIED("VI::MARK"); OUTPUT: RETVAL MODULE = VI PACKAGE = VI::OPT void DESTROY(screen) VI::OPT screen CODE: # typemap did all the checking SvREFCNT_dec((SV*)SvIV((SV*)SvRV(ST(0)))); void FETCH(screen, key) VI::OPT screen char *key PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; char *value; int boolvalue; PPCODE: INITMESSAGE; rval = api_opts_get(screen, key, &value, &boolvalue); if (!rval) { EXTEND(SP,1); PUSHs(sv_2mortal((boolvalue == -1) ? newSVpv(value, 0) : newSViv(boolvalue))); free(value); } else ST(0) = &sv_undef; rval = 0; ENDMESSAGE; void STORE(screen, key, value) VI::OPT screen char *key SV *value PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_opts_set(screen, key, SvPV(value, na), SvIV(value), SvTRUEx(value)); ENDMESSAGE; MODULE = VI PACKAGE = VI::MAP void DESTROY(screen) VI::MAP screen CODE: # typemap did all the checking SvREFCNT_dec((SV*)SvIV((SV*)SvRV(ST(0)))); void STORE(screen, key, perlproc) VI::MAP screen char *key SV *perlproc PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; int length; char *command; SV *svc; CODE: INITMESSAGE; svc = sv_2mortal(newSVpv(":perl ", 6)); sv_catsv(svc, perlproc); command = SvPV(svc, length); rval = api_map(screen, key, command, length); ENDMESSAGE; void DELETE(screen, key) VI::MAP screen char *key PREINIT: void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_unmap(screen, key); ENDMESSAGE; MODULE = VI PACKAGE = VI::MARK void DESTROY(screen) VI::MARK screen CODE: # typemap did all the checking SvREFCNT_dec((SV*)SvIV((SV*)SvRV(ST(0)))); AV * FETCH(screen, mark) VI::MARK screen char mark PREINIT: struct _mark cursor; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: INITMESSAGE; rval = api_getmark(screen, (int)mark, &cursor); ENDMESSAGE; RETVAL = newAV(); av_push(RETVAL, newSViv(cursor.lno)); av_push(RETVAL, newSViv(cursor.cno)); OUTPUT: RETVAL void STORE(screen, mark, pos) VI::MARK screen char mark AVREF pos PREINIT: struct _mark cursor; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int rval; CODE: if (av_len(pos) < 1) croak("cursor position needs 2 elements"); INITMESSAGE; cursor.lno = SvIV(*av_fetch(pos, 0, 0)); cursor.cno = SvIV(*av_fetch(pos, 1, 0)); rval = api_setmark(screen, (int)mark, &cursor); ENDMESSAGE; void FIRSTKEY(screen, ...) VI::MARK screen ALIAS: NEXTKEY = 1 PROTOTYPE: $;$ PREINIT: struct _mark cursor; void (*scr_msg) __P((SCR *, mtype_t, char *, size_t)); int next; char key[] = {0, 0}; PPCODE: if (items == 2) { next = 1; *key = *(char *)SvPV(ST(1),na); } else next = 0; if (api_nextmark(screen, next, key) != 1) { EXTEND(sp, 1); PUSHs(sv_2mortal(newSVpv(key, 1))); } else ST(0) = &sv_undef; vigor-0.016.orig/perl_api/typemap0100644000076400007640000000172507103707267015501 0ustar cjw44cjw44TYPEMAP # Grr can't let it end in OBJ 'cause xsubpp would # s/OBJ$/REF/ that for the DESTROY function VI T_VIOBJNOMUNGE VI::OPT T_VIOBJREF VI::MAP T_VIOBJREF VI::MARK T_VIOBJREF AVREF T_AVREFREF INPUT T_AVREFREF if (SvROK($arg) && SvTYPE(SvRV($arg)) == SVt_PVAV) $var = (AV *)SvRV($arg); else croak(\"$var is not a reference to an array\") T_VIOBJNOMUNGE if (sv_isa($arg, \"VI\")) { IV tmp = SvIV((SV*)SvRV($arg)); $var = ($type) tmp; if (!tmp) croak(\"screen no longer exists\"); } else croak(\"$var is not of type ${ntype}\") T_VIOBJREF if (sv_isa($arg, \"${ntype}\")) { IV tmp = SvIV((SV*)SvRV($arg)); if (sv_isa((SV *)tmp, \"VI\")) { IV tmp2 = SvIV((SV*)SvRV((SV *)tmp)); $var = ($type) tmp2; if (!tmp2) croak(\"screen no longer exists\"); } else croak(\"$var is not of type ${ntype}\"); } else croak(\"$var is not of type ${ntype}\") OUTPUT T_VIOBJNOMUNGE newVIrv($arg, $var); vigor-0.016.orig/perl_api/nviperl.pod0100644000076400007640000000175607103707267016266 0ustar cjw44cjw44=head1 NAME nviperl - nvi with embedded perl =head1 SYNOPSIS :perl require 'wc.pl' :perl wc :,$perldo $_=reverse($_) =head1 DESCRIPTION nvi with embedded perl allows you to run perl commands from within nvi. Two additional commands are made available when you enable the perl interpreter: =over 8 =item * perl cmd The perl command passes the specified commands to the perl interpreter. The C<$VI::ScreenId>, C<$VI::StartLine> and C<$VI::StopLine> are set. To find out how to maniplulate the nvi screens, see L. =item * perldo cmd The perldo command runs the specified commands on each line of the range (every line of the file if no range specified). Before running the command the line is copied into $_. If the command returns a true value the line is replaced by the new value of $_. The perldo commando does B set the C variables. (If you think this is a bad idea, tell me.) =back =head1 SEE ALSO L =head1 AUTHOR Sven Verdoolaege vigor-0.016.orig/perl_api/perlsfio.c0100644000076400007640000000302307103707267016057 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * Copyright (c) 1996 * Sven Verdoolaege. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)perlsfio.c 8.1 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include #include #include #include #include #include #include "../common/common.h" #include #include #include #include "perl_extern.h" /* * PUBLIC: #ifdef USE_SFIO */ #ifdef USE_SFIO #define NIL(type) ((type)0) static int sfnviwrite(f, buf, n, disc) Sfio_t* f; /* stream involved */ char* buf; /* buffer to read into */ int n; /* number of bytes to read */ Sfdisc_t* disc; /* discipline */ { SCR *scrp; scrp = (SCR *)SvIV((SV*)SvRV(perl_get_sv("curscr", FALSE))); msgq(scrp, M_INFO, "%.*s", n, buf); return n; } /* * sfdcnewnvi -- * Create nvi discipline * * PUBLIC: Sfdisc_t* sfdcnewnvi __P((SCR*)); */ Sfdisc_t * sfdcnewnvi(scrp) SCR *scrp; { Sfdisc_t* disc; MALLOC(scrp, disc, Sfdisc_t*, sizeof(Sfdisc_t)); if (!disc) return disc; disc->readf = (Sfread_f)NULL; disc->writef = sfnviwrite; disc->seekf = (Sfseek_f)NULL; disc->exceptf = (Sfexcept_f)NULL; return disc; } /* * PUBLIC: #endif */ #endif /* USE_SFIO */ vigor-0.016.orig/ip/0040755000076400007640000000000007103707270012704 5ustar cjw44cjw44vigor-0.016.orig/ip/IP_INSTRUCTIONS0100644000076400007640000000155707103707267015176 0ustar cjw44cjw441: Add: -DRUNNING_IP to the Makefile CFLAGS line and rebuild cl_main.o if it's already been compiled. 2: Add: IPOBJS= ip_funcs.o ip_main.o ip_read.o ip_screen.o ip_term.o after the other object lists in the Makefile. 3: Add $(IPOBJS) to the end of the NVIALL= line in the Makefile. 4: Add: # Vi IP sources. ip_funcs.o: $(srcdir)/ip/ip_funcs.c $(CC) $(CFLAGS) $? ip_main.o: $(srcdir)/ip/ip_main.c $(CC) $(CFLAGS) $? ip_read.o: $(srcdir)/ip/ip_read.c $(CC) $(CFLAGS) $? ip_screen.o: $(srcdir)/ip/ip_screen.c $(CC) $(CFLAGS) $? ip_term.o: $(srcdir)/ip/ip_term.c $(CC) $(CFLAGS) $? at the end of the Makefile. 5: Remove cl_main.o if it exists, and make nvi. 6: Go to ip_cl and change the entries in the Makefile to reflect where the nvi binary was just built. 7: Build ip_cl. 8: Enter ip_cl and you should be running vi over a pipe. vigor-0.016.orig/ip/ip.h0100644000076400007640000000550707103707267013477 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. * * @(#)ip.h 8.3 (Berkeley) 10/13/96 */ typedef struct _ip_private { int i_fd; /* Input file descriptor. */ int o_fd; /* Output file descriptor. */ size_t row; /* Current row. */ size_t col; /* Current column. */ size_t iblen; /* Input buffer length. */ size_t iskip; /* Returned input buffer. */ char ibuf[256]; /* Input buffer. */ #define IP_SCR_VI_INIT 0x0001 /* Vi screen initialized. */ u_int32_t flags; } IP_PRIVATE; #define IPP(sp) ((IP_PRIVATE *)((sp)->gp->ip_private)) #define GIPP(gp) ((IP_PRIVATE *)((gp)->ip_private)) /* The screen line relative to a specific window. */ #define RLNO(sp, lno) (sp)->woff + (lno) /* * The IP protocol consists of frames, each containing: * * * * XXX * We should have a marking byte, 0xaa to delimit frames. * */ #define IPO_CODE 1 /* An event specification. */ #define IPO_INT 2 /* 4-byte, network order integer. */ #define IPO_STR 3 /* IPO_INT: followed by N bytes. */ #define IPO_CODE_LEN 1 #define IPO_INT_LEN 4 /* A structure that can hold the information for any frame. */ typedef struct _ip_buf { int code; /* Event code. */ const char *str; /* String. */ size_t len; /* String length. */ u_int32_t val1; /* First value. */ u_int32_t val2; /* Second value. */ } IP_BUF; /* * Screen/editor IP_CODE's. * * The program structure depends on the event loop being able to return * IPO_EOF/IPOE_ERR multiple times -- eventually enough things will end * due to the events that vi will reach the command level for the screen, * at which point the exit flags will be set and vi will exit. * * IP events sent from the screen to vi. */ #define IPO_EOF 1 /* End of input (NOT ^D). */ #define IPO_ERR 2 /* Input error. */ #define IPO_INTERRUPT 3 /* Interrupt. */ #define IPO_QUIT 4 /* Quit. */ #define IPO_RESIZE 5 /* Screen resize: IPO_INT, IPO_INT. */ #define IPO_SIGHUP 6 /* SIGHUP. */ #define IPO_SIGTERM 7 /* SIGTERM. */ #define IPO_STRING 8 /* Input string: IPO_STR. */ #define IPO_WRITE 9 /* Write. */ /* * IP events sent from vi to the screen. */ #define IPO_ADDSTR 1 /* Add a string: IPO_STR. */ #define IPO_ATTRIBUTE 2 /* Set screen attribute: IPO_INT, IPO_INT. */ #define IPO_BELL 3 /* Beep/bell/flash the terminal. */ #define IPO_BUSY 4 /* Display a busy message: IPO_STR. */ #define IPO_CLRTOEOL 5 /* Clear to the end of the line. */ #define IPO_DELETELN 6 /* Delete a line. */ #define IPO_INSERTLN 7 /* Insert a line. */ #define IPO_MOVE 8 /* Move the cursor: IPO_INT, IPO_INT. */ #define IPO_REDRAW 9 /* Redraw the screen. */ #define IPO_REFRESH 10 /* Refresh the screen. */ #define IPO_RENAME 11 /* Rename the screen: IPO_STR. */ #define IPO_REWRITE 12 /* Rewrite a line: IPO_INT. */ #include "ip_extern.h" vigor-0.016.orig/ip/ip_funcs.c0100644000076400007640000001607607103707267014673 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ip_funcs.c 8.4 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include "../common/common.h" #include "../vi/vi.h" #include "ip.h" static int ip_send __P((SCR *, char *, IP_BUF *)); /* * ip_addstr -- * Add len bytes from the string at the cursor, advancing the cursor. * * PUBLIC: int ip_addstr __P((SCR *, const char *, size_t)); */ int ip_addstr(sp, str, len) SCR *sp; const char *str; size_t len; { IP_BUF ipb; IP_PRIVATE *ipp; int iv, rval; ipp = IPP(sp); /* * If ex isn't in control, it's the last line of the screen and * it's a split screen, use inverse video. */ iv = 0; if (!F_ISSET(sp, SC_SCR_EXWROTE) && ipp->row == LASTLINE(sp) && IS_SPLIT(sp)) { iv = 1; ip_attr(sp, SA_INVERSE, 1); } ipb.code = IPO_ADDSTR; ipb.len = len; ipb.str = str; rval = ip_send(sp, "s", &ipb); if (iv) ip_attr(sp, SA_INVERSE, 0); return (rval); } /* * ip_attr -- * Toggle a screen attribute on/off. * * PUBLIC: int ip_attr __P((SCR *, scr_attr_t, int)); */ int ip_attr(sp, attribute, on) SCR *sp; scr_attr_t attribute; int on; { IP_BUF ipb; ipb.code = IPO_ATTRIBUTE; ipb.val1 = attribute; ipb.val2 = on; return (ip_send(sp, "12", &ipb)); } /* * ip_baud -- * Return the baud rate. * * PUBLIC: int ip_baud __P((SCR *, u_long *)); */ int ip_baud(sp, ratep) SCR *sp; u_long *ratep; { *ratep = 9600; /* XXX: Translation: fast. */ return (0); } /* * ip_bell -- * Ring the bell/flash the screen. * * PUBLIC: int ip_bell __P((SCR *)); */ int ip_bell(sp) SCR *sp; { IP_BUF ipb; ipb.code = IPO_BELL; return (ip_send(sp, NULL, &ipb)); } /* * ip_busy -- * Display a busy message. * * PUBLIC: void ip_busy __P((SCR *, const char *, busy_t)); */ void ip_busy(sp, str, bval) SCR *sp; const char *str; busy_t bval; { IP_BUF ipb; ipb.code = IPO_BUSY; if (str == NULL) { ipb.len = 0; ipb.str = ""; } else { ipb.len = strlen(str); ipb.str = str; } ipb.val1 = bval; (void)ip_send(sp, "s1", &ipb); } /* * ip_clrtoeol -- * Clear from the current cursor to the end of the line. * * PUBLIC: int ip_clrtoeol __P((SCR *)); */ int ip_clrtoeol(sp) SCR *sp; { IP_BUF ipb; ipb.code = IPO_CLRTOEOL; return (ip_send(sp, NULL, &ipb)); } /* * ip_cursor -- * Return the current cursor position. * * PUBLIC: int ip_cursor __P((SCR *, size_t *, size_t *)); */ int ip_cursor(sp, yp, xp) SCR *sp; size_t *yp, *xp; { IP_PRIVATE *ipp; ipp = IPP(sp); *yp = ipp->row; *xp = ipp->col; return (0); } /* * ip_deleteln -- * Delete the current line, scrolling all lines below it. * * PUBLIC: int ip_deleteln __P((SCR *)); */ int ip_deleteln(sp) SCR *sp; { IP_BUF ipb; /* * This clause is required because the curses screen uses reverse * video to delimit split screens. If the screen does not do this, * this code won't be necessary. * * If the bottom line was in reverse video, rewrite it in normal * video before it's scrolled. */ if (!F_ISSET(sp, SC_SCR_EXWROTE) && IS_SPLIT(sp)) { ipb.code = IPO_REWRITE; ipb.val1 = RLNO(sp, LASTLINE(sp)); if (ip_send(sp, "1", &ipb)) return (1); } /* * The bottom line is expected to be blank after this operation, * and other screens must support that semantic. */ ipb.code = IPO_DELETELN; return (ip_send(sp, NULL, &ipb)); } /* * ip_ex_adjust -- * Adjust the screen for ex. * * PUBLIC: int ip_ex_adjust __P((SCR *, exadj_t)); */ int ip_ex_adjust(sp, action) SCR *sp; exadj_t action; { abort(); /* NOTREACHED */ } /* * ip_insertln -- * Push down the current line, discarding the bottom line. * * PUBLIC: int ip_insertln __P((SCR *)); */ int ip_insertln(sp) SCR *sp; { IP_BUF ipb; ipb.code = IPO_INSERTLN; return (ip_send(sp, NULL, &ipb)); } /* * ip_keyval -- * Return the value for a special key. * * PUBLIC: int ip_keyval __P((SCR *, scr_keyval_t, CHAR_T *, int *)); */ int ip_keyval(sp, val, chp, dnep) SCR *sp; scr_keyval_t val; CHAR_T *chp; int *dnep; { /* * VEOF, VERASE and VKILL are required by POSIX 1003.1-1990, * VWERASE is a 4BSD extension. */ switch (val) { case KEY_VEOF: *dnep = '\004'; /* ^D */ break; case KEY_VERASE: *dnep = '\b'; /* ^H */ break; case KEY_VKILL: *dnep = '\025'; /* ^U */ break; #ifdef VWERASE case KEY_VWERASE: *dnep = '\027'; /* ^W */ break; #endif default: *dnep = 1; break; } return (0); } /* * ip_move -- * Move the cursor. * * PUBLIC: int ip_move __P((SCR *, size_t, size_t)); */ int ip_move(sp, lno, cno) SCR *sp; size_t lno, cno; { IP_PRIVATE *ipp; IP_BUF ipb; ipp = IPP(sp); ipp->row = lno; ipp->col = cno; ipb.code = IPO_MOVE; ipb.val1 = RLNO(sp, lno); ipb.val2 = cno; return (ip_send(sp, "12", &ipb)); } /* * ip_refresh -- * Refresh the screen. * * PUBLIC: int ip_refresh __P((SCR *, int)); */ int ip_refresh(sp, repaint) SCR *sp; int repaint; { IP_BUF ipb; ipb.code = repaint ? IPO_REDRAW : IPO_REFRESH; return (ip_send(sp, NULL, &ipb)); } /* * ip_rename -- * Rename the file. * * PUBLIC: int ip_rename __P((SCR *)); */ int ip_rename(sp) SCR *sp; { IP_BUF ipb; ipb.code = IPO_RENAME; ipb.len = strlen(sp->frp->name); ipb.str = sp->frp->name; return (ip_send(sp, "s", &ipb)); } /* * ip_suspend -- * Suspend a screen. * * PUBLIC: int ip_suspend __P((SCR *, int *)); */ int ip_suspend(sp, allowedp) SCR *sp; int *allowedp; { *allowedp = 0; return (0); } /* * ip_usage -- * Print out the ip usage messages. * * PUBLIC: void ip_usage __P((void)); */ void ip_usage() { #define USAGE "\ usage: vi [-eFlRrSv] [-c command] [-I ifd.ofd] [-t tag] [-w size] [file ...]\n" (void)fprintf(stderr, "%s", USAGE); #undef USAGE } /* * ip_send -- * Construct and send an IP buffer. */ static int ip_send(sp, fmt, ipbp) SCR *sp; char *fmt; IP_BUF *ipbp; { IP_PRIVATE *ipp; size_t blen, off; u_int32_t ilen; int nlen, n, nw, rval; char *bp, *p; ipp = IPP(sp); GET_SPACE_RET(sp, bp, blen, 128); p = bp; nlen = 0; *p++ = ipbp->code; nlen += IPO_CODE_LEN; if (fmt != NULL) for (; *fmt != '\0'; ++fmt) switch (*fmt) { case '1': /* Value 1. */ ilen = htonl(ipbp->val1); goto value; case '2': /* Value 2. */ ilen = htonl(ipbp->val2); value: nlen += IPO_INT_LEN; off = p - bp; ADD_SPACE_RET(sp, bp, blen, nlen); p = bp + off; memmove(p, &ilen, IPO_INT_LEN); p += IPO_INT_LEN; break; case 's': /* String. */ ilen = ipbp->len; /* XXX: conversion. */ ilen = htonl(ilen); nlen += IPO_INT_LEN + ipbp->len; off = p - bp; ADD_SPACE_RET(sp, bp, blen, nlen); p = bp + off; memmove(p, &ilen, IPO_INT_LEN); p += IPO_INT_LEN; memmove(p, ipbp->str, ipbp->len); p += ipbp->len; break; } rval = 0; for (n = p - bp, p = bp; n > 0; n -= nw, p += nw) if ((nw = write(ipp->o_fd, p, n)) < 0) { rval = 1; break; } FREE_SPACE(sp, bp, blen); return (rval); } vigor-0.016.orig/ip/ip_main.c0100644000076400007640000000660507103707270014470 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ip_main.c 8.3 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "ip.h" static void ip_func_std __P((GS *)); static IP_PRIVATE *ip_init __P((GS *, char *)); static void perr __P((char *, char *)); /* * main -- * This is the main loop for the vi-as-library editor. */ int ip_main(argc, argv, gp, ip_arg) int argc; char *argv[], *ip_arg; GS *gp; { EVENT ev; IP_PRIVATE *ipp; IP_BUF ipb; int rval; /* Create and partially initialize the IP structure. */ if ((ipp = ip_init(gp, ip_arg)) == NULL) return (1); /* Add the terminal type to the global structure. */ if ((OG_D_STR(gp, GO_TERM) = OG_STR(gp, GO_TERM) = strdup("ip_curses")) == NULL) perr(gp->progname, NULL); /* * Figure out how big the screen is -- read events until we get * the rows and columns. */ do { if (ip_event(NULL, &ev, 0, 0)) return (1); } while (ev.e_event != E_EOF && ev.e_event != E_ERR && ev.e_event != E_QUIT && ev.e_event != E_WRESIZE && ev.e_event != E_SIGHUP && ev.e_event != E_SIGTERM); if (ev.e_event != E_WRESIZE) return (1); /* Run ex/vi. */ rval = editor(gp, argc, argv); /* Clean up the screen. */ (void)ip_quit(gp); /* Free the global and IP private areas. */ #if defined(DEBUG) || defined(PURIFY) || defined(LIBRARY) free(ipp); free(gp); #endif return (rval); } /* * ip_init -- * Create and partially initialize the GS structure. */ static IP_PRIVATE * ip_init(gp, ip_arg) GS *gp; char *ip_arg; { IP_PRIVATE *ipp; char *ep; /* Allocate the IP private structure. */ CALLOC_NOMSG(NULL, ipp, IP_PRIVATE *, 1, sizeof(IP_PRIVATE)); if (ipp == NULL) perr(gp->progname, NULL); gp->ip_private = ipp; /* * Crack ip_arg -- it's of the form #.#, where the first number is the * file descriptor from the screen, the second is the file descriptor * to the screen. */ if (!isdigit(ip_arg[0])) goto usage; ipp->i_fd = strtol(ip_arg, &ep, 10); if (ep[0] != '.' || !isdigit(ep[1])) goto usage; ipp->o_fd = strtol(++ep, &ep, 10); if (ep[0] != '\0') { usage: ip_usage(); return (NULL); } /* Initialize the list of ip functions. */ ip_func_std(gp); return (ipp); } /* * ip_func_std -- * Initialize the standard ip functions. */ static void ip_func_std(gp) GS *gp; { gp->scr_addstr = ip_addstr; gp->scr_attr = ip_attr; gp->scr_baud = ip_baud; gp->scr_bell = ip_bell; gp->scr_busy = ip_busy; gp->scr_clrtoeol = ip_clrtoeol; gp->scr_cursor = ip_cursor; gp->scr_deleteln = ip_deleteln; gp->scr_event = ip_event; gp->scr_ex_adjust = ip_ex_adjust; gp->scr_fmap = ip_fmap; gp->scr_insertln = ip_insertln; gp->scr_keyval = ip_keyval; gp->scr_move = ip_move; gp->scr_msg = NULL; gp->scr_optchange = ip_optchange; gp->scr_refresh = ip_refresh; gp->scr_rename = ip_rename; gp->scr_screen = ip_screen; gp->scr_suspend = ip_suspend; gp->scr_usage = ip_usage; } /* * perr -- * Print system error. */ static void perr(name, msg) char *name, *msg; { (void)fprintf(stderr, "%s:", name); if (msg != NULL) (void)fprintf(stderr, "%s:", msg); (void)fprintf(stderr, "%s\n", strerror(errno)); exit(1); } vigor-0.016.orig/ip/ip_read.c0100644000076400007640000001416107103707270014453 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ip_read.c 8.3 (Berkeley) 9/24/96"; #endif /* not lint */ #include #include #include #include #include #include #include "../common/common.h" #include "../ex/script.h" #include "ip.h" extern GS *__global_list; typedef enum { INP_OK=0, INP_EOF, INP_ERR, INP_TIMEOUT } input_t; static input_t ip_read __P((SCR *, IP_PRIVATE *, struct timeval *)); static int ip_resize __P((SCR *, size_t, size_t)); static int ip_trans __P((SCR *, IP_PRIVATE *, EVENT *)); /* * ip_event -- * Return a single event. * * PUBLIC: int ip_event __P((SCR *, EVENT *, u_int32_t, int)); */ int ip_event(sp, evp, flags, ms) SCR *sp; EVENT *evp; u_int32_t flags; int ms; { IP_PRIVATE *ipp; struct timeval t, *tp; if (LF_ISSET(EC_INTERRUPT)) { /* XXX */ evp->e_event = E_TIMEOUT; return (0); } ipp = sp == NULL ? GIPP(__global_list) : IPP(sp); /* Discard the last command. */ if (ipp->iskip != 0) { ipp->iblen -= ipp->iskip; memmove(ipp->ibuf, ipp->ibuf + ipp->iskip, ipp->iblen); ipp->iskip = 0; } /* Set timer. */ if (ms == 0) tp = NULL; else { t.tv_sec = ms / 1000; t.tv_usec = (ms % 1000) * 1000; tp = &t; } /* Read input events. */ for (;;) { switch (ip_read(sp, ipp, tp)) { case INP_OK: if (!ip_trans(sp, ipp, evp)) continue; break; case INP_EOF: evp->e_event = E_EOF; break; case INP_ERR: evp->e_event = E_ERR; break; case INP_TIMEOUT: evp->e_event = E_TIMEOUT; break; default: abort(); } break; } return (0); } /* * ip_read -- * Read characters from the input. */ static input_t ip_read(sp, ipp, tp) SCR *sp; IP_PRIVATE *ipp; struct timeval *tp; { struct timeval poll; GS *gp; SCR *tsp; fd_set rdfd; input_t rval; size_t blen; int maxfd, nr; char *bp; gp = sp == NULL ? __global_list : sp->gp; bp = ipp->ibuf + ipp->iblen; blen = sizeof(ipp->ibuf) - ipp->iblen; /* * 1: A read with an associated timeout, e.g., trying to complete * a map sequence. If input exists, we fall into #2. */ FD_ZERO(&rdfd); poll.tv_sec = 0; poll.tv_usec = 0; if (tp != NULL) { FD_SET(ipp->i_fd, &rdfd); switch (select(ipp->i_fd + 1, &rdfd, NULL, NULL, tp == NULL ? &poll : tp)) { case 0: return (INP_TIMEOUT); case -1: goto err; default: break; } } /* * 2: Wait for input. * * Select on the command input and scripting window file descriptors. * It's ugly that we wait on scripting file descriptors here, but it's * the only way to keep from locking out scripting windows. */ if (sp != NULL && F_ISSET(gp, G_SCRWIN)) { loop: FD_ZERO(&rdfd); FD_SET(ipp->i_fd, &rdfd); maxfd = ipp->i_fd; for (tsp = gp->dq.cqh_first; tsp != (void *)&gp->dq; tsp = tsp->q.cqe_next) if (F_ISSET(sp, SC_SCRIPT)) { FD_SET(sp->script->sh_master, &rdfd); if (sp->script->sh_master > maxfd) maxfd = sp->script->sh_master; } switch (select(maxfd + 1, &rdfd, NULL, NULL, NULL)) { case 0: abort(); case -1: goto err; default: break; } if (!FD_ISSET(ipp->i_fd, &rdfd)) { if (sscr_input(sp)) return (INP_ERR); goto loop; } } /* * 3: Read the input. */ switch (nr = read(ipp->i_fd, bp, blen)) { case 0: /* EOF. */ rval = INP_EOF; break; case -1: /* Error or interrupt. */ err: rval = INP_ERR; msgq(sp, M_SYSERR, "input"); break; default: /* Input characters. */ ipp->iblen += nr; rval = INP_OK; break; } return (rval); } /* * ip_trans -- * Translate messages into events. */ static int ip_trans(sp, ipp, evp) SCR *sp; IP_PRIVATE *ipp; EVENT *evp; { u_int32_t val1, val2; switch (ipp->ibuf[0]) { case IPO_EOF: evp->e_event = E_EOF; ipp->iskip = IPO_CODE_LEN; return (1); case IPO_ERR: evp->e_event = E_ERR; ipp->iskip = IPO_CODE_LEN; return (1); case IPO_INTERRUPT: evp->e_event = E_INTERRUPT; ipp->iskip = IPO_CODE_LEN; return (1); case IPO_QUIT: evp->e_event = E_QUIT; ipp->iskip = IPO_CODE_LEN; return (1); case IPO_RESIZE: if (ipp->iblen < IPO_CODE_LEN + IPO_INT_LEN * 2) return (0); evp->e_event = E_WRESIZE; memcpy(&val1, ipp->ibuf + IPO_CODE_LEN, IPO_INT_LEN); val1 = ntohl(val1); memcpy(&val2, ipp->ibuf + IPO_CODE_LEN + IPO_INT_LEN, IPO_INT_LEN); val2 = ntohl(val2); ip_resize(sp, val1, val2); ipp->iskip = IPO_CODE_LEN + IPO_INT_LEN * 2; return (1); case IPO_SIGHUP: evp->e_event = E_SIGHUP; ipp->iskip = IPO_CODE_LEN; return (1); case IPO_SIGTERM: evp->e_event = E_SIGTERM; ipp->iskip = IPO_CODE_LEN; return (1); case IPO_STRING: evp->e_event = E_STRING; string: if (ipp->iblen < IPO_CODE_LEN + IPO_INT_LEN) return (0); memcpy(&val1, ipp->ibuf + IPO_CODE_LEN, IPO_INT_LEN); val1 = ntohl(val1); if (ipp->iblen < IPO_CODE_LEN + IPO_INT_LEN + val1) return (0); ipp->iskip = IPO_CODE_LEN + IPO_INT_LEN + val1; evp->e_csp = ipp->ibuf + IPO_CODE_LEN + IPO_INT_LEN; evp->e_len = val1; return (1); case IPO_WRITE: evp->e_event = E_WRITE; ipp->iskip = IPO_CODE_LEN; return (1); default: /* * XXX: Protocol is out of sync? */ abort(); } /* NOTREACHED */ } /* * ip_resize -- * Reset the options for a resize event. */ static int ip_resize(sp, lines, columns) SCR *sp; size_t lines, columns; { GS *gp; ARGS *argv[2], a, b; char b1[1024]; /* * XXX * The IP screen has to know the lines and columns before anything * else happens. So, we may not have a valid SCR pointer, and we * have to deal with that. */ if (sp == NULL) { gp = __global_list; OG_VAL(gp, GO_LINES) = OG_D_VAL(gp, GO_LINES) = lines; OG_VAL(gp, GO_COLUMNS) = OG_D_VAL(gp, GO_COLUMNS) = columns; return (0); } a.bp = b1; b.bp = NULL; a.len = b.len = 0; argv[0] = &a; argv[1] = &b; (void)snprintf(b1, sizeof(b1), "lines=%lu", (u_long)lines); a.len = strlen(b1); if (opts_set(sp, argv, NULL)) return (1); (void)snprintf(b1, sizeof(b1), "columns=%lu", (u_long)columns); a.len = strlen(b1); if (opts_set(sp, argv, NULL)) return (1); return (0); } vigor-0.016.orig/ip/ip_term.c0100644000076400007640000000366307103707270014514 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ip_term.c 8.2 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include "../common/common.h" #include "ip.h" /* * ip_term_init -- * Initialize the terminal special keys. * * PUBLIC: int ip_term_init __P((SCR *)); */ int ip_term_init(sp) SCR *sp; { SEQ *qp; /* * Rework any function key mappings that were set before the * screen was initialized. */ for (qp = sp->gp->seqq.lh_first; qp != NULL; qp = qp->q.le_next) if (F_ISSET(qp, SEQ_FUNCMAP)) (void)ip_fmap(sp, qp->stype, qp->input, qp->ilen, qp->output, qp->olen); return (0); } /* * ip_term_end -- * End the special keys defined by the termcap/terminfo entry. * * PUBLIC: int ip_term_end __P((GS *)); */ int ip_term_end(gp) GS *gp; { SEQ *qp, *nqp; /* Delete screen specific mappings. */ for (qp = gp->seqq.lh_first; qp != NULL; qp = nqp) { nqp = qp->q.le_next; if (F_ISSET(qp, SEQ_SCREEN)) (void)seq_mdel(qp); } return (0); } /* * ip_fmap -- * Map a function key. * * PUBLIC: int ip_fmap __P((SCR *, seq_t, CHAR_T *, size_t, CHAR_T *, size_t)); */ int ip_fmap(sp, stype, from, flen, to, tlen) SCR *sp; seq_t stype; CHAR_T *from, *to; size_t flen, tlen; { /* Bind a function key to a string sequence. */ return (1); } /* * ip_optchange -- * IP screen specific "option changed" routine. * * PUBLIC: int ip_optchange __P((SCR *, int, char *, u_long *)); */ int ip_optchange(sp, opt, str, valp) SCR *sp; int opt; char *str; u_long *valp; { switch (opt) { case O_COLUMNS: case O_LINES: F_SET(sp->gp, G_SRESTART); F_CLR(sp, SC_SCR_EX | SC_SCR_VI); break; case O_TERM: msgq(sp, M_ERR, "The screen type may not be changed"); return (1); } return (0); } vigor-0.016.orig/ip/ip_screen.c0100644000076400007640000000261607103707270015021 0ustar cjw44cjw44/*- * Copyright (c) 1996 * Keith Bostic. All rights reserved. * * See the LICENSE file for redistribution information. */ #include "config.h" #ifndef lint static const char sccsid[] = "@(#)ip_screen.c 8.2 (Berkeley) 10/13/96"; #endif /* not lint */ #include #include #include #include #include "../common/common.h" #include "ip.h" /* * ip_screen -- * Initialize/shutdown the IP screen. * * PUBLIC: int ip_screen __P((SCR *, u_int32_t)); */ int ip_screen(sp, flags) SCR *sp; u_int32_t flags; { GS *gp; IP_PRIVATE *ipp; gp = sp->gp; ipp = IPP(sp); /* See if the current information is incorrect. */ if (F_ISSET(gp, G_SRESTART)) { if (ip_quit(gp)) return (1); F_CLR(gp, G_SRESTART); } /* See if we're already in the right mode. */ if (LF_ISSET(SC_VI) && F_ISSET(ipp, IP_SCR_VI_INIT)) return (0); /* Ex isn't possible. */ if (LF_ISSET(SC_EX)) return (1); /* Initialize terminal based information. */ if (ip_term_init(sp)) return (1); /* Put up the first file name. */ if (ip_rename(sp)) return (1); F_SET(ipp, IP_SCR_VI_INIT); return (0); } /* * ip_quit -- * Shutdown the screens. * * PUBLIC: int ip_quit __P((GS *)); */ int ip_quit(gp) GS *gp; { IP_PRIVATE *ipp; int rval; /* Clean up the terminal mappings. */ rval = ip_term_end(gp); ipp = GIPP(gp); F_CLR(ipp, IP_SCR_VI_INIT); return (rval); } vigor-0.016.orig/ip/tags0120777000076400007640000000000007107504605015755 2../build/tagsustar cjw44cjw44vigor-0.016.orig/FAQ0100644000076400007640000002053707103707270012632 0ustar cjw44cjw44************************************************************************* THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is Vigor, a quick hack made on top of nvi. Do not expect Vigor to work right. Do not expect Vigor to work like nvi. Above all, DO NOT BLAME THE AUTHORS OF NVI FOR VIGOR'S PROBLEMS! Before proceeding, please read README.vigor for information about Vigor, including background, requirements, total lack of warranty, and the guy who actually committed this hack. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS ************************************************************************* @(#)FAQ 8.13 (Berkeley) 10/14/96 Q: How can I get vi to display my character set? A: Vi uses the C library routine isprint(3) to determine if a character is printable, or should be displayed as an octal or hexadecimal value on the screen. Generally, if vi is displaying printable characters in octal/hexadecimal forms, your environment is not configured correctly. Try looking at the man pages that allow you to configure your locale. For example, to configure an ISO 8859-1 locale under Solaris using csh, you would do: setenv LANG C setenv LC_CTYPE iso_8859_1 Other LC_CTYPE systems/values that I'm told work: System Value ====== ===== FreeBSD lt_LN.ISO_8859-1 HP-UX 9.X american.iso88591 HP-UX 10.X en_US.iso88591 SunOS 4.X iso_8859_1 SunOS 5.X iso_8859_1 If there's no other solution, you can use the print and noprint edit options of vi to specify that a specific character is printable or not printable. Q: My map won't work! A: One thing that you should immediately check if a vi map doesn't work is if depends on the final cursor position after a P or p command. Historic vi's were inconsistent as to the final position of the cursor, and, to make matter worse, the final cursor position also depended on whether the put text came from a named or unnamed buffer! Vi follows the POSIX 1003.2 standard on this one, and makes this consistent, always placing the cursor on the first character. Q: I'm using ksh or csh as my vi edit option shell value, and file expansions don't work right! A: The problem may be in your ksh or csh startup files, e.g., .cshrc. Vi executes the shell to do name expansion, and the shell generally reads its startup files. If the startup files are not correctly configured for non-interactive use, e.g., they always echo a prompt to the screen, vi will be unable to parse the output and things will not work correctly. Q: How does the iclower edit option differ from the ignorecase (i.e. ic) edit option? A: The difference is that the ignorecase edit option always ignores the case of letters in the Regular Expression (RE), and the iclower edit option only ignores the case if there are no upper-case letters in the RE. If any upper-case letters appear in the Regular Expression, then it will be treated case-sensitively, as if the ignorecase edit option was not set. Q: When I edit binary files, vi appends a to the last line! A: This is historic practice for vi, and further, it's required by the POSIX 1003.2 standard. My intent is to provide a command line and/or edit option to turn this behavior off when I switch to version 2.0 of the Berkeley DB package. Q: My cursor keys don't work when I'm in text input mode! A: A common problem over slow links is that the set of characters sent by the cursor keys don't arrive close enough together for vi to understand that they are a single keystroke, and not separate keystrokes. Try increasing the value of the escapetime edit option, which will cause vi to wait longer before deciding that the character that starts cursor key sequences doesn't have any characters following it. Q: When I edit some files, vi seems to hang forever, and I have to kill it. A: Vi uses flock(2) and fcntl(2) to do file locking. When it attempts to acquired a lock for a file on an NFS mounted filesystem, it can hang for a very long (perhaps infinite) period of time. Turning off the "lock" edit option will keep vi from attempting to acquire any locks on the files you edit. Q: When I compile vi I get lots of warnings about pointer assignments being incompatible! A: Vi is partially written to support wide characters. When this code interfaces with the code that doesn't yet support wide characters, the pointer types clash. This will hopefully be fixed in the near future, but I've been saying that for awhile, now. Q: I get jumpy scrolling behavior in the screen! A: This is almost certainly a problem with the system's terminfo or termcap information for your terminal. If the terminfo/termcap entry doesn't have the settable scrolling region capabilities, or the more powerful scrolling commands, these behaviors can result. Historic implementations of vi, and some of the vi clones, don't suffer from this problem because they wrote their own screen support instead of using the curses library. The solution is to find a good terminfo or termcap entry for your terminal, which will fix the problem for all of the applications on your system, not just vi. Eric Raymond maintains the freely redistributable termcap/terminfo entries. They can be downloaded from http://www.ccil.org/~esr/ncurses.html, or you can contact him at esr@snark.thyrsus.com. Q: The entire screen repaints on every keystroke! A: Your system's curses implementation is broken. You should use the curses implementation provided with vi or a curses replacement such as ncurses. Eric Raymond is one of the maintainers of the freely redistributable ncurses package. You can download ncurses from http://www.ccil.org/~esr/ncurses.html, or you can contact him at esr@snark.thyrsus.com. Q: When I use vi on a Sun console (terminal type sun-34) the screen is occasionally trashed, usually when exiting vi! A: The Sun console can't handle the 'al' capability of the termcap entry (the il1 capability of terminfo entries). If you delete that entry from your terminfo/termcap information everything should work correctly. Q: I don't have a version of ctags (or I have ctags, but it doesn't tag nearly enough things)! A: There's a version of ctags available on the 4.4BSD-Lite distributions, as well as the FreeBSD, NetBSD, Linux and GNU distributions. Or, you might want to try Exuberant Ctags: Title: Exuberant Ctags Version: 1.3 Entered-date: 16JUN96 Description: A better ctags which generates tags for all possible tag types: macro definitions, enumerated values (values inside enum{...}), function and method definitions, enum/struct/union tags, external function prototypes (optional), typedefs, and variable declarations. It is far less easily fooled by code containing #if preprocessor conditional constructs, using a conditional path selection algorithm to resolve complicated choices, and a fall-back algorithm when this one fails. Can also be used to print out a list of selected objects found in source files. Keywords: ctags, tags, exuberant Author: darren@sirsi.com (Darren Hiebert) darren@hiwaay.net (Darren Hiebert) Maintained-by: darren@sirsi.com (Darren Hiebert) darren@hiwaay.net (Darren Hiebert) Primary-site: sunsite.unc.edu /pub/Linux/devel/lang/c 27kB ctags-1.3.tar.gz Alternate-site: ftp.halcyon.com /local/gvr 27kB ctags-1.3.tar.gz Original-site: Platforms: UNIX, MSDOS, WindowsNT, Windows95, OS/2, Amiga Copying-policy: Public domain Q: When I update a file I already have open, and use :e to reread it, I get nul's for the rest of the file! A: Your system's implementation of mmap(2) has a bug; you will have to exit vi and re-execute it. Q: Where can I get cscope? A: Cscope is available on UNIXWare System V Release 4.0 variants such as Sun Solaris 2.x (/opt/SUNWspro/bin) and UNIXWare System V Release 4.1. You can buy version 13.3 source with an unrestricted license for $400 from AT&T Software Solutions by calling +1-800-462-8146. Binary redistribution of cscope is an additional $1500, one-time flat fee. For more information, see http://www.unipress.com/att/new/cscope.html. vigor-0.016.orig/README0100644000076400007640000001510607103707270013154 0ustar cjw44cjw44************************************************************************* THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is Vigor, a quick hack made on top of nvi. Do not expect Vigor to work right. Do not expect Vigor to work like nvi. Above all, DO NOT BLAME THE AUTHORS OF NVI FOR VIGOR'S PROBLEMS! Before proceeding, please read README.vigor for information about Vigor, including background, requirements, total lack of warranty, and the guy who actually committed this hack. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS ************************************************************************* # @(#)README 8.149 (Berkeley) 7/14/97 This is version 1.79 (7/14/97) of nex/nvi, a reimplementation of the ex/vi text editors originally distributed as part of the Fourth Berkeley Software Distribution (4BSD), by the University of California, Berkeley. The directory layout is as follows: FAQ ........... Frequently asked questions. LICENSE ....... Copyright, use and redistribution information. README ........ This file. catalog ....... Message catalogs; see catalog/README. changelog ..... Log of changes from version to version. cl ............ Vi interface to the curses(3) library. clib .......... C library replacement source code. common ........ Code shared by ex and vi. curses ........ A stripped-down, replacement curses(3) library. db ............ A stripped-down, replacement db(3) library. dist .......... Various files used to build the vi distribution. docs .......... Ex/vi documentation, both current and historic. docs/README ... Documentation overview. docs/edit ..... Edit: A tutorial. docs/exref .... Ex Reference Manual -- Version 3.7. docs/vi.man ... UNIX manual page for nex/nvi. docs/vi.ref ... Nex/nvi reference manual. docs/vitut .... An Introduction to Display Editing with Vi. ex ............ Ex source code. include ....... Replacement include files. ip ............ Library interface to vi: vi side. ipc ........... Library interface to vi: application side. motif ......... Vi motif application. motif_l ....... Motif library interface to vi. perl_api ...... Perl scripting language support. perl_scripts .. Perl scripts. regex ......... POSIX 1003.2 regular expression library. tcl_api ....... Tcl scripting language support. tcl_scripts ... Tcl scripts. vi ............ Vi source code. Bug fixes and updated versions of this software will periodically be made available. For more information see: http://www.bostic.com/vi To ask questions about vi, report vi problems, request notification of future releases and/or bug fixes, or to contact the authors for any reason, please send email to: bostic@bostic.com =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= o This software is several years old and is the product of many folks' work. This software was originally derived from software contributed to the University of California, Berkeley by Steve Kirkendall, the author of the vi clone elvis. Without his work, this work would have been far more difficult. IEEE POSIX 1003.2 style regular expression support is courtesy of Henry Spencer, for which I am *very* grateful. Elan Amir did the original 4BSD curses work that made it possible to support a full-screen editor using curses. George Neville-Neil added the Tcl interpreter, and the initial interpreter design was his. Sven Verdoolaege added the Perl interpreter. Rob Mayoff provided the original Cscope support. o Many, many people suggested enhancements, and provided bug reports and testing, far too many to individually thank. o From the original vi acknowledgements, by William Joy and Mark Horton: Bruce Englar encouraged the early development of this display editor. Peter Kessler helped bring sanity to version 2's command layout. Bill Joy wrote versions 1 and 2.0 through 2.7, and created the framework that users see in the present editor. Mark Horton added macros and other features and made the editor work on a large number of terminals and Unix systems. o And... The financial support of UUNET Communications Services is gratefully acknowledged. =-=-=-=-=-=-=-=-=-=-= o Status: This software is in beta test, and it's pretty stable. Almost all of the historic functionality in ex/vi is there, the only major missing pieces are open mode and the lisp edit option. Nvi is largely 8-bit clean. This isn't difficult to fix, and was left in during initial development to keep things simple. Wide character support will be integrated at the same time that it is made fully 8-bit clean. There aren't a lot of new features in nex/nvi, but there are a few things you might like. The "Additional Features" section of the reference work (docs/USD.doc/vi.ref/vi.ref.txt, docs/USD.doc/vi.ref/vi.ref.ps) has more information. =-=-=-=-=-=-=-=-=-=-= o Debugging: Code fixes are greatly appreciated, of course, but if you can't provide them, please email me as much information as you can as to how I might reproduce the bug, and I'll try to fix it locally. Stack traces of core dumps are only rarely helpful -- an example file with a set of keystrokes that causes the problem is almost invariably necessary. I know it's annoying, but simply playing with the bug until you can reproduce it at will, with minimal keystrokes, is immensely helpful to me. Please include the following in the bug report; o The version of nvi you're running (use :version to get it). o The row/column dimensions of the screen (80 x 32). o Unless you're confident that they're not part of the problem, your startup files (.exrc, .nexrc) and the environment variable (EXINIT, NEXINIT) values. (Cutting and pasting the output of ":set all" is usually sufficient.) If you want to do your own debugging, recompile the program with DEBUG defined. (Configuring with --enable-debug will do this for you.) This turns on the additional command-line option -D, that takes either s or w as an argument. The option -Ds causes nvi to ignore the EXINIT and .exrc files on startup, and -Dw causes nvi to print out the process id and wait for you to enter a to continue. If you're running a memory checker (e.g. Purify) on nvi, you will first want to recompile everything with "-DPURIFY" set in the CFLAGS. This initializes allocated pages in the DB code, and free's allocated memory at the end of the nvi execution. vigor-0.016.orig/README.vigor0100644000076400007640000000215707103707270014303 0ustar cjw44cjw44THIS IS VIGOR! THIS IS NOT NVI! Vigor is designed as a vi-compatible editor, with a little (*ahem*) extra something thrown in. It was inspired by the January 4, 2000 storyline in the User Friendly comic. If you haven't seen it yet, check it out at http://www.userfriendly.org/ (and do so in a place you can freely laugh). Go ahead, I'll wait. First, let me take the blame for this atrocity, and make sure that nobody gets the wrong idea about the authors of nvi (good people all). Vigor is based on nvi, a wonderful vi-compatible editor written by many people. (See the README for a list of who wrote it, and what they did.) The Vigor build tree is mostly nvi. In order to make this in time, I took nvi and hacked it to little bits. Vigor is not part of nvi; it's a program that's based around it. If you find bugs in this code, you may safely assume that they are mine. If you like the editor, I suggest you check out the true nvi, at http://www.bostic.com/vi/ (or ftp.bostic.com for the http-impaired). I may at some point describe Vigor more. But I need to go create my monster now. Joel Ray Holveck vigor-0.016.orig/LAYOUT0100644000076400007640000001115107103707270013230 0ustar cjw44cjw44************************************************************************* THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is Vigor, a quick hack made on top of nvi. Do not expect Vigor to work right. Do not expect Vigor to work like nvi. Above all, DO NOT BLAME THE AUTHORS OF NVI FOR VIGOR'S PROBLEMS! Before proceeding, please read README.vigor for information about Vigor, including background, requirements, total lack of warranty, and the guy who actually committed this hack. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS ************************************************************************* # @(#)LAYOUT 8.12 (Berkeley) 10/10/96 LAYOUT This file: the layout of the nvi sources. LICENSE Nvi's copyright notice and conditions for redistribution. README Welcome message and basic information. build/ The build/configuration directory for nvi. See build/README for more information. catalog/ Support for message catalogs for nvi. See catalog/README for more information. cl/ Source files for nvi's curses screen support. clib/ Replacement source files for C library functions. common/ Source files for pieces of code that are shared by ex and vi, e.g., searching and logging code or code translating line numbers into requests to the dbopen(3) database code. It also has the interface code for modifying "records" in the underlying database. curses/ A stripped-down replacement curses library. Do not try and use this library outside of nvi, many standard curses functions have been removed because nvi doesn't use them. See build/README for more information. db/ A stripped-down replacement DB library. Do not try and use this library outside of nvi, many standard DB functions have been removed because nvi doesn't use them. See db/README for more information. docs/ Ex/vi documentation, both current and historic. USD.doc/ [USD stands for "User's Supplementary Documents".] edit/ Roff source for "Edit: A tutorial". This document was USD:14 in the 4.3BSD manuals, but was not distributed with 4.4BSD. exref/ Roff source for "Ex Reference Manual -- Version 3.7". This document was USD:16 in the 4.3BSD manuals, and USD tabbed 12 in the 4.4BSD manuals. vi.man/ Roff source for a UNIX manual page for nex/nvi. An updated version of the 4.4BSD manual page. vi.ref/ Roff source for the nex/nvi reference document. An updated version of the 4.4BSD document, USD tabbed 13. vitut/ Roff source for "An Introduction to Display Editing with Vi". This document was USD:15 in the 4.3BSD manuals, but was not distributed with 4.4BSD. It includes the historic "Vi Quick Reference" card. PostScript preformatted versions of the nex/nvi reference manual and manual page are in the files named with a ".ps" suffix, in their respective source directories. Flat text preformatted versions of the nex/nvi reference manual and manual page are in the files named with a ".txt" suffix, in their respective source directories. changelog -- Log of changes from version to version. features -- Todo list, suggested features list. internals/ autowrite -- Vi autowrite option discussion. context -- Previous context marks discussion. gdb.script -- GDB debugging scripts. input -- Vi maps, executable buffers, and input discussion. openmode -- Open mode behaviors. quoting -- Vi quoting discussion. structures -- Out-of-date nvi internal structure description. tutorial/ -- Historic vi tutorial(s), of unknown quality. ex/ The ex source code. Because vi has the colon command, lots of this code is used by vi. Generally, if functionality is shared by both ex and vi, it's in the ex directory. If it's vi only, it's in the vi directory. Files are generally named by the command(s) they support, but occasionally with a name that describes their functionality. version.h -- Version information. include/ Replacement include files: bitstring.h -- The 4.4BSD bitstring operations. sys/queue.h -- The 4.4BSD queue operations. perl_api/ Source code supporting the Perl scripting language for nvi. perl_scripts/ Scripts for Perl included with nvi. regex/ Henry Spencer's POSIX 1003.2 regular expression (RE) library. tcl_api/ Source code supporting the Tcl scripting language for nvi. tcl_scripts/ Scripts for Tcl included with nvi. tk/ Source files for nvi's Tk screen support. init.tcl -- Vi startup tcl script. vi/ The vi source code. vigor-0.016.orig/LICENSE0100644000076400007640000000547707103707270013313 0ustar cjw44cjw44************************************************************************* THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR THIS IS NOT NVI THIS IS VIGOR * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * This is Vigor, a quick hack made on top of nvi. Do not expect Vigor to work right. Do not expect Vigor to work like nvi. Above all, DO NOT BLAME THE AUTHORS OF NVI FOR VIGOR'S PROBLEMS! Before proceeding, please read README.vigor for information about Vigor, including background, requirements, total lack of warranty, and the guy who actually committed this hack. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS NVI NOT IS THIS VIGOR IS THIS ************************************************************************* Copyright (c) 2000 Joel Ray Holveck. All rights reserved. Copyright (c) 1996, 1997 Sleepycat Software. All rights reserved. Copyright (c) 1991, 1992, 1993, 1994, 1995, 1996 Keith Bostic. All rights reserved. /* * Copyright (c) 1991, 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */